--- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -1271,6 +1271,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \ mt7981-snfi-nand-rfb.dtb \ mt7981-emmc-rfb.dtb \ mt7981-sd-rfb.dtb \ + mt7986a-bpi-r3-sd.dtb \ + mt7986a-bpi-r3-emmc.dtb \ mt7986a-rfb.dtb \ mt7986b-rfb.dtb \ mt7986a-sd-rfb.dtb \ --- /dev/null +++ b/configs/mt7986a_bpi-r3-emmc_defconfig @@ -0,0 +1,194 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_TARGET_MT7986=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc" +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_emmc_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_BOOTDELAY=30 +CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_CFB_CONSOLE_ANSI=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_GPIO_HOG=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_FIT=y +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_BUTTON=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_CDP=y +CONFIG_CMD_CPU=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_DM=y +CONFIG_CMD_DNS=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ENV_READMEM=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FDT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_FS_UUID=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_HASH=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_LED=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_LINK_LOCAL=y +# CONFIG_CMD_MBR is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y +CONFIG_CMD_PSTORE=y +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y +CONFIG_CMD_PWM=y +CONFIG_CMD_SMC=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_UBI=y +CONFIG_CMD_UBI_RENAME=y +CONFIG_CMD_UBIFS=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +CONFIG_CMD_RARP=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_USB=y +CONFIG_CMD_UUID=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DM_MMC=y +CONFIG_DM_MTD=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_USB=y +CONFIG_DM_PWM=y +CONFIG_PWM_MTK=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y +CONFIG_PARTITION_UUIDS=y +CONFIG_NETCONSOLE=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_DM_GPIO=y +CONFIG_DM_SCSI=y +CONFIG_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_CMD_SCSI=y +CONFIG_PHY=y +CONFIG_PHY_MTK_TPHY=y +CONFIG_PHY_FIXED=y +CONFIG_MTK_AHCI=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PCI=y +CONFIG_MTD=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_DM_PCI=y +CONFIG_PCIE_MEDIATEK=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7622=y +CONFIG_POWER_DOMAIN=y +CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_RAM=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_MMC=y +CONFIG_MMC_DEFAULT_DEV=1 +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_MMC_SUPPORTS_TUNING=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MTK_SPI_NAND=y +CONFIG_MTK_SPI_NAND_MTD=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_WDT_MTK=y +CONFIG_LZO=y +CONFIG_ZSTD=y +CONFIG_HEXDUMP=y +CONFIG_RANDOM_UUID=y +CONFIG_REGEX=y +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MTK=y +CONFIG_USB_STORAGE=y +CONFIG_OF_EMBED=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_OFFSET=0x400000 +CONFIG_ENV_OFFSET_REDUND=0x440000 +CONFIG_ENV_SIZE=0x40000 +CONFIG_ENV_SIZE_REDUND=0x40000 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_HEXDUMP=y +CONFIG_USE_DEFAULT_ENV_FILE=y +CONFIG_MTD_SPI_NAND=y +CONFIG_MTK_SPIM=y +#CONFIG_MTK_SNOR=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_CMD_MTD=y +CONFIG_CMD_SF=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_LMB_MAX_REGIONS=64 --- /dev/null +++ b/configs/mt7986a_bpi-r3-nor_defconfig @@ -0,0 +1,193 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_TARGET_MT7986=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc" +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_nor_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_BOOTDELAY=30 +CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_CFB_CONSOLE_ANSI=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_GPIO_HOG=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_FIT=y +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_BUTTON=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_CDP=y +CONFIG_CMD_CPU=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_DM=y +CONFIG_CMD_DNS=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ENV_READMEM=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FDT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_FS_UUID=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_HASH=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_LED=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_LINK_LOCAL=y +# CONFIG_CMD_MBR is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y +CONFIG_CMD_PSTORE=y +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y +CONFIG_CMD_PWM=y +CONFIG_CMD_SMC=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_UBI=y +CONFIG_CMD_UBI_RENAME=y +CONFIG_CMD_UBIFS=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +CONFIG_CMD_RARP=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_USB=y +CONFIG_CMD_UUID=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DM_MMC=y +CONFIG_DM_MTD=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_USB=y +CONFIG_DM_PWM=y +CONFIG_PWM_MTK=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y +CONFIG_PARTITION_UUIDS=y +CONFIG_NETCONSOLE=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_DM_GPIO=y +CONFIG_DM_SCSI=y +CONFIG_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_CMD_SCSI=y +CONFIG_PHY=y +CONFIG_PHY_MTK_TPHY=y +CONFIG_PHY_FIXED=y +CONFIG_MTK_AHCI=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PCI=y +CONFIG_MTD=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_DM_PCI=y +CONFIG_PCIE_MEDIATEK=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7622=y +CONFIG_POWER_DOMAIN=y +CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_RAM=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_MMC=y +CONFIG_MMC_DEFAULT_DEV=1 +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_MMC_SUPPORTS_TUNING=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MTK_SPI_NAND=y +CONFIG_MTK_SPI_NAND_MTD=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_WDT_MTK=y +CONFIG_LZO=y +CONFIG_ZSTD=y +CONFIG_HEXDUMP=y +CONFIG_RANDOM_UUID=y +CONFIG_REGEX=y +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MTK=y +CONFIG_USB_STORAGE=y +CONFIG_OF_EMBED=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MTD=y +CONFIG_ENV_MTD_NAME="u-boot-env" +CONFIG_ENV_OFFSET=0x0 +CONFIG_ENV_OFFSET_REDUND=0x20000 +CONFIG_ENV_SIZE=0x20000 +CONFIG_ENV_SIZE_REDUND=0x20000 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_HEXDUMP=y +CONFIG_USE_DEFAULT_ENV_FILE=y +#CONFIG_MTD_SPI_NAND=y +CONFIG_MTK_SPIM=y +#CONFIG_MTK_SNOR=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_CMD_MTD=y +CONFIG_CMD_SF=y +CONFIG_LMB_MAX_REGIONS=64 --- /dev/null +++ b/configs/mt7986a_bpi-r3-sd_defconfig @@ -0,0 +1,194 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_TARGET_MT7986=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-sd" +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_sdmmc_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-sd.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_BOOTDELAY=30 +CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_CFB_CONSOLE_ANSI=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_GPIO_HOG=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_FIT=y +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_BUTTON=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_CDP=y +CONFIG_CMD_CPU=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_DM=y +CONFIG_CMD_DNS=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ENV_READMEM=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FDT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_FS_UUID=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_HASH=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_LED=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_LINK_LOCAL=y +# CONFIG_CMD_MBR is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y +CONFIG_CMD_PSTORE=y +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y +CONFIG_CMD_PWM=y +CONFIG_CMD_SMC=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_UBI=y +CONFIG_CMD_UBI_RENAME=y +CONFIG_CMD_UBIFS=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +CONFIG_CMD_RARP=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_USB=y +CONFIG_CMD_UUID=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DM_MMC=y +CONFIG_DM_MTD=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_USB=y +CONFIG_DM_PWM=y +CONFIG_PWM_MTK=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y +CONFIG_PARTITION_UUIDS=y +CONFIG_NETCONSOLE=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_DM_GPIO=y +CONFIG_DM_SCSI=y +CONFIG_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_CMD_SCSI=y +CONFIG_PHY=y +CONFIG_PHY_MTK_TPHY=y +CONFIG_PHY_FIXED=y +CONFIG_MTK_AHCI=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PCI=y +CONFIG_MTD=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_DM_PCI=y +CONFIG_PCIE_MEDIATEK=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7622=y +CONFIG_POWER_DOMAIN=y +CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_RAM=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_MMC=y +CONFIG_MMC_DEFAULT_DEV=1 +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_MMC_SUPPORTS_TUNING=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MTK_SPI_NAND=y +CONFIG_MTK_SPI_NAND_MTD=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_WDT_MTK=y +CONFIG_LZO=y +CONFIG_ZSTD=y +CONFIG_HEXDUMP=y +CONFIG_RANDOM_UUID=y +CONFIG_REGEX=y +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MTK=y +CONFIG_USB_STORAGE=y +CONFIG_OF_EMBED=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ENV_OFFSET=0x400000 +CONFIG_ENV_OFFSET_REDUND=0x440000 +CONFIG_ENV_SIZE=0x40000 +CONFIG_ENV_SIZE_REDUND=0x40000 +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_HEXDUMP=y +CONFIG_USE_DEFAULT_ENV_FILE=y +CONFIG_MTD_SPI_NAND=y +CONFIG_MTK_SPIM=y +#CONFIG_MTK_SNOR=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_MTD=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_CMD_MTD=y +CONFIG_CMD_SF=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_LMB_MAX_REGIONS=64 --- /dev/null +++ b/configs/mt7986a_bpi-r3-snand_defconfig @@ -0,0 +1,195 @@ +CONFIG_ARM=y +CONFIG_POSITION_INDEPENDENT=y +CONFIG_ARCH_MEDIATEK=y +CONFIG_TARGET_MT7986=y +CONFIG_SYS_TEXT_BASE=0x41e00000 +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_DEVICE_TREE="mt7986a-bpi-r3-emmc" +CONFIG_DEFAULT_ENV_FILE="bananapi_bpi-r3_snand_env" +CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-bpi-r3-emmc.dtb" +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_DEBUG_UART_BASE=0x11002000 +CONFIG_DEBUG_UART_CLOCK=40000000 +CONFIG_DEBUG_UART=y +CONFIG_SYS_LOAD_ADDR=0x46000000 +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SMBIOS_PRODUCT_NAME="" +CONFIG_AUTOBOOT_KEYED=y +CONFIG_BOOTDELAY=30 +CONFIG_AUTOBOOT_MENU_SHOW=y +CONFIG_CFB_CONSOLE_ANSI=y +CONFIG_BOARD_LATE_INIT=y +CONFIG_BUTTON=y +CONFIG_BUTTON_GPIO=y +CONFIG_GPIO_HOG=y +CONFIG_CMD_ENV_FLAGS=y +CONFIG_FIT=y +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y +CONFIG_LED=y +CONFIG_LED_BLINK=y +CONFIG_LED_GPIO=y +CONFIG_LOGLEVEL=7 +CONFIG_LOG=y +CONFIG_SYS_PROMPT="MT7986> " +CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_BOOTP=y +CONFIG_CMD_BUTTON=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_CDP=y +CONFIG_CMD_CPU=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_DM=y +CONFIG_CMD_DNS=y +CONFIG_CMD_ECHO=y +CONFIG_CMD_ENV_READMEM=y +CONFIG_CMD_ERASEENV=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FDT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_CMD_FS_UUID=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_HASH=y +CONFIG_CMD_ITEST=y +CONFIG_CMD_LED=y +CONFIG_CMD_LICENSE=y +CONFIG_CMD_LINK_LOCAL=y +# CONFIG_CMD_MBR is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +CONFIG_CMD_PCI=y +CONFIG_CMD_PSTORE=y +CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 +CONFIG_CMD_SF_TEST=y +CONFIG_CMD_PING=y +CONFIG_CMD_PXE=y +CONFIG_CMD_PWM=y +CONFIG_CMD_SMC=y +CONFIG_CMD_TFTPBOOT=y +CONFIG_CMD_TFTPSRV=y +CONFIG_CMD_UBI=y +CONFIG_CMD_UBI_RENAME=y +CONFIG_CMD_UBIFS=y +CONFIG_CMD_ASKENV=y +CONFIG_CMD_PART=y +CONFIG_CMD_RARP=y +CONFIG_CMD_SETEXPR=y +CONFIG_CMD_SLEEP=y +CONFIG_CMD_SNTP=y +CONFIG_CMD_SOURCE=y +CONFIG_CMD_STRINGS=y +CONFIG_CMD_USB=y +CONFIG_CMD_UUID=y +CONFIG_DISPLAY_CPUINFO=y +CONFIG_DM_MMC=y +CONFIG_DM_MTD=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_USB=y +CONFIG_DM_PWM=y +CONFIG_PWM_MTK=y +CONFIG_HUSH_PARSER=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_VERSION_VARIABLE=y +CONFIG_PARTITION_UUIDS=y +CONFIG_NETCONSOLE=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_DM_GPIO=y +CONFIG_DM_SCSI=y +CONFIG_AHCI=y +CONFIG_AHCI_PCI=y +CONFIG_SCSI_AHCI=y +CONFIG_SCSI=y +CONFIG_CMD_SCSI=y +CONFIG_PHY=y +CONFIG_PHY_MTK_TPHY=y +CONFIG_PHY_FIXED=y +CONFIG_MTK_AHCI=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PCI=y +CONFIG_MTD=y +CONFIG_MTD_UBI_FASTMAP=y +CONFIG_DM_PCI=y +CONFIG_PCIE_MEDIATEK=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7622=y +CONFIG_POWER_DOMAIN=y +CONFIG_PRE_CONSOLE_BUFFER=y +CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_RAM=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_MMC=y +CONFIG_MMC_DEFAULT_DEV=1 +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_MMC_SUPPORTS_TUNING=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_MTK_SPI_NAND=y +CONFIG_MTK_SPI_NAND_MTD=y +CONFIG_SYSRESET_WATCHDOG=y +CONFIG_WDT_MTK=y +CONFIG_LZO=y +CONFIG_ZSTD=y +CONFIG_HEXDUMP=y +CONFIG_RANDOM_UUID=y +CONFIG_REGEX=y +CONFIG_USB=y +CONFIG_USB_HOST=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MTK=y +CONFIG_USB_STORAGE=y +CONFIG_OF_EMBED=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_UBI=y +CONFIG_ENV_UBI_PART="ubi" +CONFIG_ENV_SIZE=0x1f000 +CONFIG_ENV_SIZE_REDUND=0x1f000 +CONFIG_ENV_UBI_VOLUME="ubootenv" +CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_REGMAP=y +CONFIG_SYSCON=y +CONFIG_CLK=y +CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_MMC_HS200_SUPPORT=y +CONFIG_MMC_MTK=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_MEDIATEK_ETH=y +CONFIG_PINCTRL=y +CONFIG_PINCONF=y +CONFIG_PINCTRL_MT7986=y +CONFIG_POWER_DOMAIN=y +CONFIG_MTK_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_SERIAL=y +CONFIG_MTK_SERIAL=y +CONFIG_HEXDUMP=y +CONFIG_USE_DEFAULT_ENV_FILE=y +CONFIG_MTD_SPI_NAND=y +CONFIG_MTK_SPIM=y +#CONFIG_MTK_SNOR=y +#CONFIG_DM_SPI_FLASH=y +#CONFIG_SPI_FLASH_MTD=y +#CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_CMD_MTD=y +#CONFIG_CMD_SF=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_LMB_MAX_REGIONS=64 --- /dev/null +++ b/arch/arm/dts/mt7986a-bpi-r3-emmc.dts @@ -0,0 +1,33 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986a-bpi-r3-sd.dts" +#include +/ { + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "fixed-1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <8>; + max-frequency = <200000000>; + cap-mmc-highspeed; + cap-mmc-hw-reset; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_1p8v>; + non-removable; + status = "okay"; +}; + --- /dev/null +++ b/arch/arm/dts/mt7986a-bpi-r3-sd.dts @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2021 MediaTek Inc. + * Author: Sam Shih + */ + +/dts-v1/; +#include "mt7986.dtsi" +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "BananaPi BPi-R3"; + compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb"; + + chosen { + stdout-path = &uart0; + tick-timer = &timer0; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + keys { + compatible = "gpio-keys"; +/* + factory { + label = "reset"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; +*/ + wps { + label = "reset"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: green { + label = "green:status"; + gpios = <&gpio 69 GPIO_ACTIVE_HIGH>; + }; + + led_status_blue: blue { + label = "blue:status"; + gpios = <&gpio 86 GPIO_ACTIVE_HIGH>; + }; + }; + +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +ð { + status = "okay"; + mediatek,gmac-id = <0>; + phy-mode = "sgmii"; + mediatek,switch = "mt7531"; + reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&pinctrl { + spic_pins: spi1-pins-func-1 { + mux { + function = "spi"; + groups = "spi1_2"; + }; + }; + + uart1_pins: spi1-pins-func-3 { + mux { + function = "uart"; + groups = "uart1_2"; + }; + }; + + pwm_pins: pwm0-pins-func-1 { + mux { + function = "pwm"; + groups = "pwm0"; + }; + }; + + mmc0_pins_default: mmc0default { + mux { + function = "flash"; + groups = "emmc_51"; + }; + + conf-cmd-dat { + pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2", + "EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5", + "EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD"; + input-enable; + drive-strength = ; + bias-pull-up = ; + }; + + conf-clk { + pins = "EMMC_CK"; + drive-strength = ; + bias-pull-down = ; + }; + + conf-dsl { + pins = "EMMC_DSL"; + bias-pull-down = ; + }; + + conf-rst { + pins = "EMMC_RSTB"; + drive-strength = ; + bias-pull-up = ; + }; + }; + + spi_flash_pins: spi0-pins-func-1 { + mux { + function = "flash"; + groups = "spi0", "spi0_wp_hold"; + }; + + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = ; + bias-pull-up = ; + }; + + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = ; + bias-pull-down = ; + }; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm_pins>; + status = "okay"; +}; + +&spi0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + must_tx; + enhance_timing; + dma_ext; + ipm_design; + support_quad; + tick_dly = <1>; + sample_sel = <0>; + + spi_nor@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <52000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x40000>; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x40000>; + }; + + partition@80000 { + label = "reserved"; + reg = <0x80000 0x80000>; + }; + + partition@100000 { + label = "fip"; + reg = <0x100000 0x80000>; + }; + + partition@180000 { + label = "recovery"; + reg = <0x180000 0xa80000>; + }; + + partition@c00000 { + label = "fit"; + reg = <0xc00000 0x1400000>; + }; + }; + }; + + spi_nand@1 { + compatible = "spi-nand"; + reg = <1>; + spi-max-frequency = <52000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bl2"; + reg = <0x0 0x80000>; + }; + + partition@80000 { + label = "factory"; + reg = <0x80000 0x300000>; + }; + + partition@380000 { + label = "fip"; + reg = <0x380000 0x200000>; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x7a80000>; + }; + }; + }; +}; + +&watchdog { + status = "disabled"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_default>; + bus-width = <4>; + max-frequency = <52000000>; + cap-sd-highspeed; + r_smpl = <1>; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_3p3v>; + status = "okay"; +}; + --- /dev/null +++ b/bananapi_bpi-r3_sdmmc_env @@ -0,0 +1,75 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 +bootargs=root=/dev/mmcblk0p65 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi +bootconf=config-mt7986a-bananapi-bpi-r3 +bootdelay=0 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb +bootled_pwr=green:status +bootled_rec=blue:status +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 +bootmenu_title= ( ( ( OpenWrt ) ) ) [SD card] +bootmenu_0=Initialize environment.=run _firstboot +bootmenu_0d=Run default boot command.=run boot_default +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return +bootmenu_2=Boot production system from SD card.=run boot_production ; run bootmenu_confirm_return +bootmenu_3=Boot recovery system from SD card.=run boot_recovery ; run bootmenu_confirm_return +bootmenu_4=Load production system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to SD card.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_6=Install bootloader, recovery and production to NOR.=if sf probe ; then run nor_init ; else echo "NOR not detected" ; fi ; run bootmenu_confirm_return +bootmenu_7=Install bootloader, recovery and production to NAND.=if nand info ; then run ubi_init ; else echo "NAND not detected" ; fi ; run bootmenu_confirm_return +bootmenu_8=Reboot.=reset +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset +boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; else if sf probe ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3 ; fi ; fi +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_production=led $bootled_pwr on ; run boot_update_conf ; run sdmmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off +boot_recovery=led $bootled_rec on ; run boot_update_conf ; run sdmmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off +boot_sdmmc=run boot_production ; run boot_recovery +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run sdmmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run sdmmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 +part_default=production +part_recovery=recovery +reset_factory=eraseenv && reset +sdmmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol +sdmmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol +sdmmc_read_snand_bl2=part start mmc 0 install part_addr && mmc read $loadaddr $part_addr 0x400 +sdmmc_read_snand_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x800 && mmc read $loadaddr $offset 0x1000 +sdmmc_read_nor_bl2=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x2800 && mmc read $loadaddr $offset 0x400 +sdmmc_read_nor_fip=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3000 && mmc read $loadaddr $offset 0x1000 +sdmmc_read_emmc_install=part start mmc 0 install part_addr && setexpr offset $part_addr + 0x3800 && mmc read $loadaddr $offset 0x4000 +sdmmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +sdmmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000 +nor_erase_env=mtd erase u-boot-env +nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb +nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb +nor_init=run nor_init_bl && run nor_init_openwrt +nor_init_bl=run sdmmc_read_nor_bl2 && run mtd_write_bl2 && run sdmmc_read_nor_fip && run mtd_write_fip && run nor_erase_env +nor_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run nor_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run nor_write_production +ubi_create_env=ubi create ubootenv 0x100000 dynamic 0 ; ubi create ubootenv2 0x100000 dynamic 1 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi +ubi_init=run ubi_init_bl && run ubi_format && run ubi_create_env && run ubi_init_openwrt && run ubi_init_emmc_install +ubi_init_openwrt=run sdmmc_read_recovery && iminfo $loadaddr && run ubi_write_recovery ; run sdmmc_read_production && iminfo $loadaddr && run ubi_write_production +ubi_init_bl=run sdmmc_read_snand_bl2 && run mtd_write_bl2 && run sdmmc_read_snand_fip && run mtd_write_fip +ubi_init_emmc_install=run sdmmc_read_emmc_install && run ubi_write_emmc_install +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data +ubi_write_emmc_install=ubi check emmc_install && ubi remote emmc_install ; ubi create emmc_install 0x800000 dynamic ; ubi write $loadaddr emmc_install 0x800000 +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" --- /dev/null +++ b/bananapi_bpi-r3_nor_env @@ -0,0 +1,55 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 +bootargs=root=/dev/mtdblock0p1 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi +bootconf=config-mt7986a-bananapi-bpi-r3-emmc-nor +bootdelay=0 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-preloader.bin +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-nor-bl31-uboot.fip +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb +bootled_pwr=green:status +bootled_rec=blue:status +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 +bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NOR] +bootmenu_0=Initialize environment.=run _firstboot +bootmenu_0d=Run default boot command.=run boot_default +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return +bootmenu_2=Boot production system from flash.=run boot_production ; run bootmenu_confirm_return +bootmenu_3=Boot recovery system from flash.=run boot_recovery ; run bootmenu_confirm_return +bootmenu_4=Load production system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to flash.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to flash.=run boot_tftp_write_fip ; run bootmenu_confirm_return +bootmenu_7=Load BL2 preloader via TFTP then write to flash.=run boot_tftp_write_preloader ; run bootmenu_confirm_return +bootmenu_8=Reboot.=reset +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_production=run boot_update_conf ; led $bootled_pwr on ; run nor_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run nor_read_recovery ; bootm $loadaddr#$bootconf ; led $bootled_rec off +boot_serial_write_fip=loadx $loadaddr 115200 && run boot_write_fip +boot_serial_write_preloader=loadx $loadaddr 115200 && run boot_write_preloader +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run nor_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run nor_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run boot_write_fip +boot_tftp_write_preloader=tftpboot $loadaddr $bootfile_bl2 && run boot_write_preloader +boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-nor ; fi +boot_nor=run boot_production ; run boot_recovery +boot_write_fip=mtd erase fip && mtd write fip $loadaddr +boot_write_preloader=mtd erase bl2 && mtd write bl2 $loadaddr +reset_factory=mtd erase u-boot-env +nor_read_production=mtd read fit $loadaddr 0x0 0x1000 && imsz $loadaddr image_size && mtd read fit $loadaddr 0x0 $image_size +nor_read_recovery=mtd read recovery $loadaddr 0x0 0x1000 && imsz $loadaddr image_size && mtd read recovery $loadaddr 0x0 $image_size +nor_pad_size=imsz $loadaddr image_size ; setexpr image_eb 0x$image_size / 0x10000 ; setexpr tmp1 0x$image_size % 0x10000 ; test 0x$tmp1 -gt 0 && setexpr image_eb 0x$image_eb + 1 ; setexpr image_eb $image_eb * 0x10000 +nor_write_production=run nor_pad_size ; test 0x$image_eb -le 0x3000000 && mtd erase fit && mtd write fit $loadaddr 0x0 $image_eb +nor_write_recovery=run nor_pad_size ; test 0x$image_eb -le 0x900000 && mtd erase recovery 0x0 0x$image_eb && mtd write recovery $loadaddr 0x0 $image_eb +_init_env=setenv _init_env ; saveenv +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" --- /dev/null +++ b/bananapi_bpi-r3_snand_env @@ -0,0 +1,69 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 +bootargs=root=/dev/ubiblock0_2p1 +bootconf=config-mt7986a-bananapi-bpi-r3-snand +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi +bootdelay=0 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-preloader.bin +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-snand-bl31-uboot.fip +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb +bootled_pwr=green:status +bootled_rec=blue:status +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 +bootmenu_title= ( ( ( OpenWrt ) ) ) [SPI-NAND] +bootmenu_0=Initialize environment.=run _firstboot +bootmenu_0d=Run default boot command.=run boot_default +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return +bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return +bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return +bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return +bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return +bootmenu_8=Install bootloader, recovery and production to eMMC.=if mmc partconf 0 ; then run emmc_init ; else echo "eMMC not detected" ; fi ; run bootmenu_confirm_return +bootmenu_9=Reboot.=reset +bootmenu_10=Reset all settings to factory defaults.=run reset_factory ; reset +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_production=run boot_update_conf ; led $bootled_pwr on ; run ubi_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run ubi_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off +boot_ubi=run boot_update_conf ; run boot_production ; run boot_recovery +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 +boot_update_conf=if mmc partconf 0 ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-snand ; fi +part_default=production +part_recovery=recovery +reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 +mtd_write_fip=mtd erase fip && mtd write fip $loadaddr +mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr +ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 +ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset +ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi +ubi_read_production=ubi read $loadaddr fit && iminfo $loadaddr && run ubi_prepare_rootfs +ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery +ubi_read_emmc_install=ubi check emmc_install && ubi read $loadaddr emmc_install +ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data +ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic 2 && ubi write $loadaddr fit $filesize +ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic 3 && ubi write $loadaddr recovery $filesize +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size +emmc_init=mmc dev 0 && mmc bootbus 0 0 0 0 && run emmc_init_bl && run emmc_init_openwrt ; env default bootcmd ; saveenv ; saveenv +emmc_init_bl=run ubi_read_emmc_install && setenv fileaddr $loadaddr && run emmc_write_bl2 && setexpr fileaddr $loadaddr + 0x100000 && run emmc_write_fip && setexpr fileaddr $loadaddr + 0x500000 && run emmc_write_hdr +emmc_init_openwrt=run ubi_read_recovery && iminfo $loadaddr && run emmc_write_recovery ; run ubi_read_production && iminfo $loadaddr && run emmc_write_production +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800 +emmc_write_hdr=mmc erase 0x0 0x40 && mmc write $fileaddr 0x0 0x40 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol +_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver" --- /dev/null +++ b/bananapi_bpi-r3_emmc_env @@ -0,0 +1,56 @@ +ipaddr=192.168.1.1 +serverip=192.168.1.254 +loadaddr=0x46000000 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 +bootargs=root=/dev/mmcblk0p65 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi +bootconf=config-mt7986a-bananapi-bpi-r3-emmc +bootdelay=0 +bootfile=openwrt-mediatek-filogic-bananapi_bpi-r3-initramfs-recovery.itb +bootfile_bl2=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-preloader.bin +bootfile_fip=openwrt-mediatek-filogic-bananapi_bpi-r3-emmc-bl31-uboot.fip +bootfile_upg=openwrt-mediatek-filogic-bananapi_bpi-r3-squashfs-sysupgrade.itb +bootled_pwr=green:status +bootled_rec=blue:status +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 +bootmenu_default=0 +bootmenu_delay=0 +bootmenu_title= ( ( ( OpenWrt ) ) ) [eMMC] +bootmenu_0=Initialize environment.=run _firstboot +bootmenu_0d=Run default boot command.=run boot_default +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return +bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return +bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return +bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return +bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to eMMC.=run boot_tftp_write_fip ; run bootmenu_confirm_return +bootmenu_7=Load BL2 preloader via TFTP then write to eMMC.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return +bootmenu_8=Reboot.=reset +bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset +boot_first=if button reset ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever +boot_production=run boot_update_conf ; led $bootled_pwr on ; run emmc_read_production && bootm $loadaddr#$bootconf ; led $bootled_pwr off +boot_recovery=run boot_update_conf ; led $bootled_rec on ; run emmc_read_recovery && bootm $loadaddr#$bootconf ; led $bootled_rec off +boot_emmc=run boot_update_conf ; run boot_production ; run boot_recovery +boot_tftp_forever=led $bootled_rec on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done +boot_tftp_production=run boot_update_conf ; tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_recovery=run boot_update_conf ; tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi +boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run emmc_write_fip +boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run emmc_write_bl2 +boot_tftp=run boot_update_conf ; tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf +boot_update_conf=if nand info ; then setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-snand ; else setenv bootconf config-mt7986a-bananapi-bpi-r3-emmc-nor ; fi +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200 +part_default=production +part_recovery=recovery +reset_factory=eraseenv && reset +emmc_read_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol +emmc_read_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol +emmc_write_bl2=mmc partconf 0 1 1 1 && mmc erase 0x0 0x400 && mmc write $fileaddr 0x0 0x400 ; mmc partconf 0 1 1 0 +emmc_write_fip=mmc erase 0x3400 0x2000 && mmc write $fileaddr 0x3400 0x2000 && mmc erase 0x2000 0x800 +emmc_write_production=part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol +emmc_write_recovery=part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol +_init_env=setenv _init_env ; setenv _create_env ; saveenv ; saveenv +_firstboot=setenv _firstboot ; run _switch_to_menu ; run _init_env ; run boot_first +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"