/package/boot/uboot-layerscape/patches/

• ../
• 0001-armv8-Support-loading-32-bit-OS-in-AArch32-execution.patch
• 0002-armv8-SMP-support-for-loading-32-bit-OS.patch
• 0003-armv8-aarch32-Disable-CONFIG_FSL_LS_PPA-for-loading-.patch
• 0004-armv8-Support-loading-32-bit-OS-which-is-not-in-the-.patch
• 0005-armv8-set-openwrt-lede-default-boot-env-for-ls1043ar.patch
• 0006-armv8-fsl-layerscape-Put-SMMU-config-code-in-SMMU_BA.patch
• 0007-armv8-fsl-layerscape-Avoid-LS1043A-specifc-defines.patch
• 0008-armv8-ls1043a-Add-the-OCRAM-initialization.patch
• 0009-driver-mtd-spi-Adding-support-for-QSPI-Emulator.patch
• 0010-driver-mtd-spi-Adding-support-for-QSPI-flash.patch
• 0011-armv8-fsl-layerscape-fix-compile-warning-rcw_tmp.patch
• 0012-armv8-LSCH2-early-and-final-mmu-needs-matching-NS-at.patch
• 0013-armv8-fsl-layerscape-Add-support-of-QorIQ-LS1012A-So.patch
• 0014-armv8-ls1012a-Add-support-of-ls1012aqds-board.patch
• 0015-armv8-ls1012a-Add-support-of-ls1012ardb-board.patch
• 0016-ARM-asm-types-Introduce-DMA_ADDR_T_64BIT.patch
• 0017-armv8-fsl-layerscape-add-dwc3-gadget-driver-support.patch
• 0018-boards-ls1012aqds-Enable-SDHC_CD-in-brdcfg10-of-FPGA.patch
• 0019-armv8-ls1012a-Add-CSU-assignment-for-eSDHC2-SAI1-SAI.patch
• 0020-armv8-ls1012a-Update-DDR-init-sequence.patch
• 0021-sf-set-the-Uniform-Sector-to-CR3NV-instead-of-CR3V.patch
• 0022-include-usb-Rename-USB-controller-base-address-mappi.patch
• 0023-drivers-usb-fsl-add-USB-ULPI-init-code.patch
• 0024-config-ls1012aqds-Add-USB-EHCI-support-for-ls1012aqd.patch
• 0025-armv8-ls1012ardb-Add-qspi-SECURE-BOOT-target.patch
• 0026-fsl-qixis-conditionally-compile-IFC-based-qixis-func.patch
• 0027-fsl-qixis-Add-flag-for-LBMAP-brdcfg-reg-offset.patch
• 0028-fsl-ls1012a-qixis-Add-support-for-qixis-subsystem.patch
• 0029-armv8-ls1012a-Added-CSU-assignment-for-USB2.patch
• 0030-ARMv8-Enable-CPUECTLR.SMPEN-for-data-coherency.patch
• 0031-mtd-sf-add-exceed-flash-16MB-support-for-qspi.patch
• 0032-driver-spi-fsl_qspi-enable-AHB-read-for-qspi.patch
• 0033-mmc-fsl_esdhc-support-two-esdhc-host-controllers.patch
• 0034-mmc-fsl_esdhc-add-workaround-for-non-removable-card-.patch
• 0035-armv8-ls1012a-enable-two-esdhc-host-controllers-supp.patch
• 0036-driver-spi-add-exceed-16MB-flash-support.patch
• 0037-driver-spi-remove-Warning-prints-for-Spansion-FS-S-f.patch
• 0038-Shift-board-specific-configurations.patch
• 0039-armv8-ls1012a-Add-support-of-ls1012afrdm-board.patch
• 0040-DNCPE-138-CSU-config-for-PFE.patch
• 0041-DNCPE-4-LS1012A-PPFE-driver.patch
• 0042-DNCPE-138-Rest-external-PHYs.patch
• 0043-DNCPE-296-PFE-reset-workaround.patch
• 0044-armv8-fsl-layerscape-Add-support-of-GPIO-structure.patch
• 0045-board-freescale-ls1012afrdm-Add-support-of-Ethernet.patch
• 0046-Correcting-address-for-PFE-Driver.patch
• 0047-Enable-second-SGMII-1G-interface.patch
• 0048-armv8-ls1012a-enable-sdhc2-support.patch
• 0049-DNCPE-296-PFE-reset-woraround-fix.patch
• 0050-DNCPE-138-Rest-external-PHYs-before-driver-starts.patch
• 0051-PPFE-warnings-Fix.patch
• 0052-Add-Freescale-Copyright-in-PPFE-driver.patch
• 0053-armv8-arch-fsl-layerscape-Update-name-of-Soc.patch
• 0054-armv8-fsl-layerscape-Update-DDR-timings.patch
• 0055-Add-License-file-for-PPFE-firmware-bins.patch
• 0056-mmc-fsl_esdhc-disable-sdhc2-when-no-card-inserted-fo.patch
• 0057-driver-spi-Fix-DSPI-bug-after-adding-exceed-16MB-for.patch
• 0058-mmc-fsl_esdhc-disable-sdhc2-when-no-card-inserted-fo.patch
• 0059-armv8-ls1012a-Make-FAT-and-EXT2-commands-support-com.patch
• 0060-ls1012-sata-add-sata-support.patch
• 0061-ARMv8-freescale-Consolidate-PPA-flags-under-a-single.patch
• 0062-ARMv8-freescale-Fix-the-address-map-of-SCFG.patch
• 0063-board-freescale-ls1012a-Enable-secure-DDR-on-LS1012A.patch
• 0064-board-freescale-ls1012a-Intergrate-and-enable-PPA-on.patch
• 0065-docs-fsl-ppa-Add-documentation-for-PPA-trusted-FW.patch
• 0066-armv8-pfe-Enable-UDP-checksum-for-proper-tftp-operat.patch
• 0067-armv8-ls1012a-DDR-optmizations.patch
• 0068-driver-pfe_eth-use-ifdef-instead-of-if.patch
• 0069-armv8-pfe-frdm-Reset-external-PHYs-before-driver-sta.patch
• 0070-board-ls1012afrdm-overwrite-CONFIG_EXTRA_ENV_SETTING.patch
• 0071-driver-fsl_qspi-disable-AHB-buffer-prefetch.patch
• 0072-driver-spi-fsl-qspi-remove-compile-Warnings.patch
• 0073-armv8-pfe-Change-MDIO-HOLDTIME-value-to-5.patch
• 0074-board-freescale-ls1012a-Intergrate-and-enable-PPA-on.patch
• 0075-arm-ls1012ardb-add-CONFIG_ARMV8_PSCI.patch
• 0076-arm-ls1012afrdm-add-CONFIG_ARMV8_PSCI.patch
• 0077-board-ls1012aqds-Avoid-reset-masking.patch
• 0078-board-ls1012aqds-Update-LBMAP_MASK-and-RST_CTL_RESET.patch
• 0079-armv8-pfe-Update-class-firmware.patch
• 0080-ls1012ardb-PPA-Enable-PPA-validation-in-case-of-secu.patch
• 0081-crypto-fsl-Update-blob-cmd-to-accept-64bit-addresses.patch
• 0082-armv8-ls1012a-Update-DDR-timing.patch
• 0083-armv8-fsl-layerscape-Fix-the-conflict-between-PPA-an.patch
• 0084-armv8-fsl-layerscape-Moving-FSL_LS_PPA-flag-to-EXTRA.patch
• 0085-armv8-fsl-layerscape-Enable-FSL_LS_PPA-in-Secure-boo.patch
• 0086-driver-spi-add-spansion-s25fs-s-family-protect-unpro.patch
• 0087-armv8-ls1012a-Update-bootargs.patch
• 0088-driver-spi-enable-stm_get_locked_range-for-spansion-.patch
• 0089-driver-spi-fix-id-enclosure-error.patch
• 0090-ls1012-add-CONFIG_SYS_FSL_MAX_NUM_OF_SEC-define.patch
• 0091-armv8-fsl-layerscape-ls1012ardb-configs-disable-FSL_.patch
• 0092-armv8-set-openwrt-lede-default-boot-env-for-ls1012ar.patch
• 0093-add-byte_swap.tcl-script-for-uboot-can-run-save-in-q.patch