From d93da0d0169b2ca90b888e4bb782c259e5ddf2fe Mon Sep 17 00:00:00 2001 From: Andrew Cameron Date: Thu, 18 Jun 2020 08:25:43 -0500 Subject: ath79: add support for TP-Link CPE610 v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with one Ethernet port based on Atheros AR9344 Specifications: - 560/450/225 MHz (CPU/DDR/AHB) - 1x 10/100 Mbps Ethernet - 64 MB of DDR2 RAM - 8 MB of SPI-NOR Flash - 23dBi high-gain directional 2×2 MIMO antenna and a dedicated metal reflector - Power, LAN, WLAN5G green LEDs - 3x green RSSI LEDs Flashing instructions: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron --- tools/firmware-utils/src/tplink-safeloader.c | 40 ++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'tools') diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index f0e777124c..f2e4a7ce9a 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -474,6 +474,46 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "support-list", }, + /** Firmware layout for the CPE610V2 */ + { + .id = "CPE610V2", + .vendor = "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n", + .support_list = + "SupportList:\r\n" + "CPE610(TP-LINK|EU|N300-5|00000000):2.0\r\n" + "CPE610(TP-LINK|EU|N300-5|45550000):2.0\r\n" + "CPE610(TP-LINK|EU|N300-5|55530000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5|00000000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5|45550000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5|55530000):2.0\r\n" + "CPE610(TP-LINK|US|N300-5|55530000):2.0\r\n" + "CPE610(TP-LINK|UN|N300-5):2.0\r\n" + "CPE610(TP-LINK|EU|N300-5):2.0\r\n" + "CPE610(TP-LINK|US|N300-5):2.0\r\n", + .support_trail = '\xff', + .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"partition-table", 0x20000, 0x02000}, + {"default-mac", 0x30000, 0x00020}, + {"product-info", 0x31100, 0x00100}, + {"signature", 0x32000, 0x00400}, + {"os-image", 0x40000, 0x200000}, + {"file-system", 0x240000, 0x570000}, + {"soft-version", 0x7b0000, 0x00100}, + {"support-list", 0x7b1000, 0x00400}, + {"user-config", 0x7c0000, 0x10000}, + {"default-config", 0x7d0000, 0x10000}, + {"log", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "support-list", + }, + { .id = "WBS210", .vendor = "CPE510(TP-LINK|UN|N300-5):1.0\r\n", -- cgit v1.2.3