From 20fdfe37d21f19901eec86ace8da0c083faa7ebc Mon Sep 17 00:00:00 2001 From: Andrew Cameron Date: Thu, 7 Nov 2019 21:36:02 -0600 Subject: ath79: add support for the TP-LINK WBS510 V1 This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron --- tools/firmware-utils/src/tplink-safeloader.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'tools') diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 89955725d0..4e85bd59ca 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -545,7 +545,8 @@ static struct device_info boards[] = { "SupportList:\r\n" "WBS510(TP-LINK|UN|N300-5):1.20\r\n" "WBS510(TP-LINK|US|N300-5):1.20\r\n" - "WBS510(TP-LINK|EU|N300-5):1.20\r\n", + "WBS510(TP-LINK|EU|N300-5):1.20\r\n" + "WBS510(TP-LINK|CA|N300-5):1.20\r\n", .support_trail = '\xff', .soft_ver = NULL, -- cgit v1.2.3