From 491ae3357e10be46ff6342cad5d2f820bf2cd9f9 Mon Sep 17 00:00:00 2001 From: Roman Kuzmitskii Date: Sun, 4 Oct 2020 05:43:41 +0000 Subject: ath79: add support for Ubiquiti airCube AC The Ubiquiti Network airCube AC is a cube shaped device supporting 2.4 GHz and 5 GHz with internal 2x2 MIMO antennas. It can be powered with either one of: - 24v power supply with 3.0mm x 1.0mm barrel plug - 24v passive PoE on first LAN port There are four 10/100/1000 Mbps ports (1 * WAN + 3 * LAN). First LAN port have optional PoE passthrough to the WAN port. SoC: Qualcomm / Atheros AR9342 RAM: 64 MB DDR2 Flash: 16 MB SPI NOR Ethernet: 4x 10/100/1000 Mbps (1 WAN + 3 LAN) LEDS: 1x via a SPI controller (not yet supported) Buttons: 1x Reset Serial: 1x (only RX and TX); 115200 baud, 8N1 Missing features: - LED control is not supported Physical to internal switch port mapping: - physical port #1 (poe in) = switchport 2 - physical port #2 = switchport 3 - physical port #3 = switchport 5 - physical port #4 (wan/poe out) = switchport 4 Factory update is tested and is the same as for Ubiquiti AirCube ISP hence the shared configuration between that devices. Signed-off-by: Roman Kuzmitskii --- tools/firmware-utils/src/mkfwimage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/firmware-utils') diff --git a/tools/firmware-utils/src/mkfwimage.c b/tools/firmware-utils/src/mkfwimage.c index 591ce44a78..5b749a3f66 100644 --- a/tools/firmware-utils/src/mkfwimage.c +++ b/tools/firmware-utils/src/mkfwimage.c @@ -148,7 +148,7 @@ struct fw_info fw_info[] = { .sign = true, }, { - .name = "ACB-ISP", + .name = "ACB", .fw_layout = { .kern_start = 0x9f050000, .kern_entry = 0x80002000, -- cgit v1.2.3