From d2ddc2550ab4d974c194ee227608e479c9a98b0e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Mon, 22 Jun 2015 07:59:09 +0000 Subject: b53: Allow using all 8 ports on BCM53011 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On two tested devices: Netgear R6250 (BCM53011 rev 2) and Luxul XWC-1000 (BCM53011 rev 3) it was possible to use port 7 and eth1 (instead of port 5 and eth0). It seems BCM53011 just like BCM53012 has 8 ports and usually 3 of them are connected to the SoC. Signed-off-by: Rafał Miłecki Backport of r46104 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@46107 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/generic/files/drivers/net/phy/b53/b53_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'target') diff --git a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c index 47b5a8b03f..859d8d1bdc 100644 --- a/target/linux/generic/files/drivers/net/phy/b53/b53_common.c +++ b/target/linux/generic/files/drivers/net/phy/b53/b53_common.c @@ -1201,7 +1201,7 @@ static const struct b53_chip_data b53_switch_chips[] = { .dev_name = "BCM53011", .alias = "bcm53011", .vlans = 4096, - .enabled_ports = 0x1f, + .enabled_ports = 0x1bf, .cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */ .vta_regs = B53_VTA_REGS, .duplex_reg = B53_DUPLEX_STAT_GE, -- cgit v1.2.3