From bbab32b2e33dad65c0102d47e0263872ac857e32 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 15 Jan 2020 23:03:16 +0100 Subject: ath79: use caldata partition label consistently Change the caldata partition DTS node label to be consistent with the label property for some Netgear WNDR devices. Signed-off-by: Adrian Schmutzler --- target/linux/ath79/dts/ar9344_netgear_wndr.dtsi | 8 ++++---- target/linux/ath79/dts/qca9563_netgear_wndr.dtsi | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'target') diff --git a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi index dd212c0d88..9fd428a1b3 100644 --- a/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi +++ b/target/linux/ath79/dts/ar9344_netgear_wndr.dtsi @@ -139,7 +139,7 @@ reg = <0x40000 0x40000>; }; - art: partition@80000 { + caldata: partition@80000 { label = "caldata"; reg = <0x80000 0x40000>; read-only; @@ -233,7 +233,7 @@ /* default for ar934x, except for 1000M */ pll-data = <0x06000000 0x00000101 0x00001616>; - mtd-mac-address = <&art 0x0>; + mtd-mac-address = <&caldata 0x0>; phy-mode = "rgmii"; phy-handle = <&phy0>; @@ -260,7 +260,7 @@ &wmac { status = "okay"; - mtd-mac-address = <&art 0x0>; + mtd-mac-address = <&caldata 0x0>; qca,no-eeprom; }; @@ -270,7 +270,7 @@ ath9k: wifi@0,0 { compatible = "pci168c,0033"; reg = <0x0000 0 0 0 0>; - mtd-mac-address = <&art 0xc>; + mtd-mac-address = <&caldata 0xc>; qca,no-eeprom; #gpio-cells = <2>; gpio-controller; diff --git a/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi index 2ab9b0b34a..bc06c5bd9d 100644 --- a/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi +++ b/target/linux/ath79/dts/qca9563_netgear_wndr.dtsi @@ -149,7 +149,7 @@ reg = <0x90000 0x160000>; }; - art: partition@1f0000 { + caldata: partition@1f0000 { label = "caldata"; reg = <0x1f0000 0x10000>; read-only; @@ -208,7 +208,7 @@ pll-data = <0x03000101 0x00000101 0x00001919>; - mtd-mac-address = <&art 0x0>; + mtd-mac-address = <&caldata 0x0>; phy-mode = "sgmii"; phy-handle = <&phy0>; @@ -217,7 +217,7 @@ &wmac { status = "okay"; - mtd-mac-address = <&art 0x0>; + mtd-mac-address = <&caldata 0x0>; qca,no-eeprom; }; @@ -228,7 +228,7 @@ /* chip is AR9580, override bogus PCI ID 168c:abcd */ compatible = "pci168c,0033"; reg = <0x0000 0 0 0 0>; - mtd-mac-address = <&art 0xc>; + mtd-mac-address = <&caldata 0xc>; qca,no-eeprom; qca,gpio-mask=<0xf6ff>; /* unmask pin 9 for RFKILL button */ #gpio-cells = <2>; -- cgit v1.2.3