From ae3ac76e565724e188138dafe38ebeed122e2cf8 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Fri, 23 Dec 2016 08:21:31 +0100 Subject: ramips: use destinct 11AC NAS board name Use a distinct board name even if the board is near to identical to the WeVO W2914NS v2. To make sure that a 11AC NAS image can not be installed on a WeVO W2914NS v2, both board need to use different names. Signed-off-by: Mathias Kresin --- target/linux/ramips/base-files/etc/board.d/01_leds | 21 ++++++++++----------- .../linux/ramips/base-files/etc/board.d/02_network | 9 +++++---- target/linux/ramips/base-files/lib/ramips.sh | 2 +- target/linux/ramips/dts/11ACNAS.dts | 14 ++++++++++++++ target/linux/ramips/dts/W2914NSV2.dts | 14 ++++++++++++++ target/linux/ramips/dts/W2914NSV2.dtsi | 14 -------------- 6 files changed, 44 insertions(+), 30 deletions(-) (limited to 'target') diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index bcb1df1050..b7f3b36d8a 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -17,6 +17,16 @@ board=$(ramips_board_name) board_config_update case $board in +11acnas|\ +all0239-3g|\ +hw550-3g|\ +mofi3500-3gn|\ +sap-g3200u3|\ +sk-wb8|\ +w2914nsv2|\ +wf-2881) + set_usb_led "$board:green:usb" + ;; 3g150b|\ 3g300m) set_usb_led "$board:blue:3g" @@ -45,14 +55,6 @@ air3gii) set_wifi_led "$board:green:wlan" set_usb_led "$board:green:mobile" ;; -all0239-3g|\ -hw550-3g|\ -mofi3500-3gn|\ -sap-g3200u3|\ -sk-wb8|\ -wf-2881) - set_usb_led "$board:green:usb" - ;; all0256n) ucidef_set_rssimon "wlan0" "200000" "1" ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssilow" "wlan0" "1" "40" "0" "6" @@ -315,9 +317,6 @@ vocore) ucidef_set_led_netdev "eth" "ETH" "$board:orange:eth" "eth0" set_wifi_led "$board:green:status" ;; -w2914nsv2) - set_usb_led "$board:green:usb" - ;; w502u) set_usb_led "$board:blue:usb" set_wifi_led "rt2800pci-phy0::radio" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 94cf0ec7fc..daf9b33a74 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -32,6 +32,11 @@ ramips_setup_interfaces() local board="$1" case $board in + 11acnas|\ + w2914nsv2) + ucidef_add_switch "switch0" \ + "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" + ;; 3g150b|\ 3g300m|\ a5-v11|\ @@ -251,10 +256,6 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0" ;; - w2914nsv2) - ucidef_add_switch "switch0" \ - "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan:5" "6@eth0" - ;; wcr-150gn) ucidef_add_switch "switch0" \ "0:lan" "6t@eth0" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 50903c75d6..31a2049696 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -14,7 +14,7 @@ ramips_board_detect() { case "$machine" in *"11AC NAS Router") - name="w2914nsv2" + name="11acnas" ;; *"3G150B") name="3g150b" diff --git a/target/linux/ramips/dts/11ACNAS.dts b/target/linux/ramips/dts/11ACNAS.dts index 55678f532b..8be9869db9 100644 --- a/target/linux/ramips/dts/11ACNAS.dts +++ b/target/linux/ramips/dts/11ACNAS.dts @@ -9,4 +9,18 @@ device_type = "memory"; reg = <0x0 0x10000000>; }; + + gpio-leds { + compatible = "gpio-leds"; + + // Only USB LED is connected to GPIO. + // All of other LEDs are connected directly to + // switch, WiFi chip, Vcc, so they are not controllable + // via GPIO + + usb { + label = "11acnas:green:usb"; + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/target/linux/ramips/dts/W2914NSV2.dts b/target/linux/ramips/dts/W2914NSV2.dts index 37afffd475..ac26dbe75d 100644 --- a/target/linux/ramips/dts/W2914NSV2.dts +++ b/target/linux/ramips/dts/W2914NSV2.dts @@ -9,4 +9,18 @@ device_type = "memory"; reg = <0x0 0x8000000>; }; + + gpio-leds { + compatible = "gpio-leds"; + + // Only USB LED is connected to GPIO. + // All of other LEDs are connected directly to + // switch, WiFi chip, Vcc, so they are not controllable + // via GPIO + + usb { + label = "w2914nsv2:green:usb"; + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + }; + }; }; diff --git a/target/linux/ramips/dts/W2914NSV2.dtsi b/target/linux/ramips/dts/W2914NSV2.dtsi index e80b1877d4..7b11a0f6a2 100644 --- a/target/linux/ramips/dts/W2914NSV2.dtsi +++ b/target/linux/ramips/dts/W2914NSV2.dtsi @@ -26,20 +26,6 @@ linux,code = ; }; }; - - gpio-leds { - compatible = "gpio-leds"; - - // Only USB LED is connected to GPIO. - // All of other LEDs are connected directly to - // switch, WiFi chip, Vcc, so they are not controllable - // via GPIO - - usb { - label = "w2914nsv2:green:usb"; - gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; - }; - }; }; &xhci { -- cgit v1.2.3