From a4e9c8f14b63cd44300ed452312c03a69aae9ca1 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Tue, 12 Nov 2019 01:23:07 +0900 Subject: ramips: add support for netis WF2770 netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100/1000Mbps - Switch: MT7530BU - UART: - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1 MAC addresses in factory partition: 0x0004: LAN, WiFi 2.4GHz (label_mac-6) 0x0028: not used (label_mac-1) 0x002e: WAN (label_mac) 0x8004: WiFi 5GHz (label_mac+2) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Reviewed-by: Pawel Dembicki Signed-off-by: Sungbo Eo --- target/linux/ramips/dts/mt7620a_netis_wf2770.dts | 161 +++++++++++++++++++++ target/linux/ramips/image/Makefile | 6 + target/linux/ramips/image/mt7620.mk | 11 ++ target/linux/ramips/image/mt7621.mk | 6 - .../mt7620/base-files/etc/board.d/02_network | 5 + 5 files changed, 183 insertions(+), 6 deletions(-) create mode 100644 target/linux/ramips/dts/mt7620a_netis_wf2770.dts (limited to 'target') diff --git a/target/linux/ramips/dts/mt7620a_netis_wf2770.dts b/target/linux/ramips/dts/mt7620a_netis_wf2770.dts new file mode 100644 index 0000000000..a0e9cfff10 --- /dev/null +++ b/target/linux/ramips/dts/mt7620a_netis_wf2770.dts @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "netis,wf2770", "ralink,mt7620a-soc"; + model = "NETIS WF2770"; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "wf2770:blue:wlan"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + led-toggle { + label = "led-toggle"; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "config"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&state_default { + gpio { + groups = "i2c", "uartf"; + function = "gpio"; + }; +}; + +ðernet { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins &mdio_pins>; + + mtd-mac-address = <&factory 0x4>; + + port@5 { + status = "okay"; + mediatek,fixed-link = <1000 1 1 1>; + phy-mode = "rgmii"; + }; + + mdio-bus { + status = "okay"; + + ethernet-phy@0 { + reg = <0>; + phy-mode = "rgmii"; + }; + + ethernet-phy@1 { + reg = <1>; + phy-mode = "rgmii"; + }; + + ethernet-phy@2 { + reg = <2>; + phy-mode = "rgmii"; + }; + + ethernet-phy@3 { + reg = <3>; + phy-mode = "rgmii"; + }; + + ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; + + ethernet-phy@1f { + reg = <0x1f>; + phy-mode = "rgmii"; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0x0>; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 4806226fd0..b00e6d8726 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -100,6 +100,12 @@ define Build/mkdlinkfw-factory mv $@.new $@ endef +define Build/netis-tail + echo -n $(1) >> $@ + echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \ + sed 's/../\\\\x&/g' | xargs echo -ne >> $@ +endef + define Build/poray-header $(STAGING_DIR_HOST)/bin/mkporayfw $(1) -f $@ -o $@.new mv $@.new $@ diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 4fa8c68a88..e435b1d15f 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -700,6 +700,17 @@ define Device/netgear_wn3000rp-v3 endef TARGET_DEVICES += netgear_wn3000rp-v3 +define Device/netis_wf2770 + SOC := mt7620a + IMAGE_SIZE := 16064k + UIMAGE_NAME := WF2770_0.0.00 + DEVICE_VENDOR := NETIS + DEVICE_MODEL := WF2770 + DEVICE_PACKAGES := kmod-mt76x0e + KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2770 | uImage lzma +endef +TARGET_DEVICES += netis_wf2770 + define Device/nexx_wt3020-4m SOC := mt7620n BLOCKSIZE := 4k diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 082bb31b79..343379b764 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -81,12 +81,6 @@ define Build/iodata-mstc-header ) endef -define Build/netis-tail - echo -n $(1) >> $@ - echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \ - sed 's/../\\\\x&/g' | xargs echo -ne >> $@ -endef - define Build/ubnt-erx-factory-image if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \ echo '21001:6' > $(1).compat; \ diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 20932f60e9..c1dbf8d71d 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -170,6 +170,7 @@ ramips_setup_interfaces() "1:lan:4" "2:lan:3" "4:lan:2" "5:lan:1" "0:wan" "6@eth0" ;; linksys,e1700|\ + netis,wf2770|\ ralink,mt7620a-mt7530-evb) ucidef_add_switch "switch0" ucidef_add_switch_attr "switch0" "enable" "false" @@ -338,6 +339,10 @@ ramips_setup_macs() linksys,e1700) wan_mac=$(mtd_get_mac_ascii config WAN_MAC_ADDR) ;; + netis,wf2770) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$wan_mac + ;; tplink,archer-c2-v1|\ tplink,archer-c20-v1|\ tplink,archer-c20i|\ -- cgit v1.2.3