From 92558d67a463bfbb351d30e28648de03b635f024 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 6 Sep 2007 16:27:37 +0000 Subject: strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX__ becomes CONFIG_TARGET_, same for profiles. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/Makefile | 2 +- target/linux/adm5120-2.6/Makefile | 27 - .../adm5120-2.6/base-files/default/sbin/wget2nand | 64 - target/linux/adm5120-2.6/config/default | 289 - .../adm5120-2.6/files/arch/mips/adm5120/Kconfig | 20 - .../adm5120-2.6/files/arch/mips/adm5120/Makefile | 15 - .../files/arch/mips/adm5120/adm5120_info.c | 93 - .../adm5120-2.6/files/arch/mips/adm5120/board.c | 129 - .../files/arch/mips/adm5120/boards/Makefile | 11 - .../files/arch/mips/adm5120/boards/cellvision.c | 192 - .../files/arch/mips/adm5120/boards/compex.c | 222 - .../files/arch/mips/adm5120/boards/edimax.c | 84 - .../files/arch/mips/adm5120/boards/generic.c | 53 - .../files/arch/mips/adm5120/boards/infineon.c | 167 - .../files/arch/mips/adm5120/boards/mikrotik.c | 172 - .../files/arch/mips/adm5120/boards/zyxel.c | 127 - .../adm5120-2.6/files/arch/mips/adm5120/clock.c | 76 - .../adm5120-2.6/files/arch/mips/adm5120/gpio.c | 356 - .../adm5120-2.6/files/arch/mips/adm5120/irq.c | 203 - .../adm5120-2.6/files/arch/mips/adm5120/memory.c | 179 - .../adm5120-2.6/files/arch/mips/adm5120/platform.c | 181 - .../adm5120-2.6/files/arch/mips/adm5120/prom.c | 276 - .../files/arch/mips/adm5120/prom/Makefile | 9 - .../files/arch/mips/adm5120/prom/bootbase.c | 124 - .../adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c | 86 - .../files/arch/mips/adm5120/prom/generic.c | 60 - .../files/arch/mips/adm5120/prom/myloader.c | 75 - .../files/arch/mips/adm5120/prom/prom_read.h | 63 - .../files/arch/mips/adm5120/prom/routerboot.c | 142 - .../adm5120-2.6/files/arch/mips/adm5120/reset.c | 62 - .../adm5120-2.6/files/arch/mips/adm5120/setup.c | 73 - .../adm5120-2.6/files/arch/mips/adm5120/time.c | 54 - .../adm5120-2.6/files/arch/mips/adm5120/trxsplit.c | 208 - .../files/arch/mips/pci/fixup-adm5120.c | 175 - .../adm5120-2.6/files/arch/mips/pci/ops-adm5120.c | 143 - .../adm5120-2.6/files/arch/mips/pci/pci-adm5120.c | 80 - .../adm5120-2.6/files/drivers/leds/leds-adm5120.c | 361 - .../adm5120-2.6/files/drivers/leds/leds-gpio.c | 212 - .../files/drivers/mtd/maps/adm5120-flash.c | 574 - .../linux/adm5120-2.6/files/drivers/mtd/myloader.c | 178 - .../files/drivers/mtd/nand/rbmipsnand.c | 207 - .../adm5120-2.6/files/drivers/net/adm5120sw.c | 625 - .../adm5120-2.6/files/drivers/net/adm5120sw.h | 114 - .../files/drivers/serial/adm5120_uart.c | 520 - .../files/drivers/usb/host/adm5120-hcd.c | 996 - .../include/asm-mips/mach-adm5120/adm5120_board.h | 50 - .../include/asm-mips/mach-adm5120/adm5120_defs.h | 60 - .../include/asm-mips/mach-adm5120/adm5120_info.h | 92 - .../include/asm-mips/mach-adm5120/adm5120_intc.h | 76 - .../include/asm-mips/mach-adm5120/adm5120_irq.h | 55 - .../include/asm-mips/mach-adm5120/adm5120_mpmc.h | 87 - .../asm-mips/mach-adm5120/adm5120_platform.h | 85 - .../include/asm-mips/mach-adm5120/adm5120_switch.h | 148 - .../include/asm-mips/mach-adm5120/adm5120_uart.h | 75 - .../include/asm-mips/mach-adm5120/asm/sizes.h | 56 - .../asm-mips/mach-adm5120/cpu-feature-overrides.h | 89 - .../files/include/asm-mips/mach-adm5120/gpio.h | 126 - .../files/include/asm-mips/mach-adm5120/prom/cfe.h | 31 - .../include/asm-mips/mach-adm5120/prom/generic.h | 31 - .../include/asm-mips/mach-adm5120/prom/myloader.h | 191 - .../asm-mips/mach-adm5120/prom/routerboot.h | 137 - .../include/asm-mips/mach-adm5120/prom/zynos.h | 98 - .../adm5120-2.6/files/include/linux/gpio_leds.h | 37 - target/linux/adm5120-2.6/image/Makefile | 177 - .../linux/adm5120-2.6/image/lzma-loader/Makefile | 63 - .../adm5120-2.6/image/lzma-loader/src/LzmaDecode.c | 589 - .../adm5120-2.6/image/lzma-loader/src/LzmaDecode.h | 100 - .../adm5120-2.6/image/lzma-loader/src/Makefile | 99 - .../linux/adm5120-2.6/image/lzma-loader/src/README | 55 - .../adm5120-2.6/image/lzma-loader/src/board.c | 178 - .../adm5120-2.6/image/lzma-loader/src/config.h | 119 - .../adm5120-2.6/image/lzma-loader/src/decompress.c | 349 - .../linux/adm5120-2.6/image/lzma-loader/src/head.S | 209 - .../adm5120-2.6/image/lzma-loader/src/loader.lds | 29 - .../image/lzma-loader/src/lzma-data.lds | 8 - .../adm5120-2.6/image/lzma-loader/src/printf.c | 350 - .../adm5120-2.6/image/lzma-loader/src/printf.h | 18 - .../adm5120-2.6/patches-2.6.22/001-adm5120.patch | 114 - .../patches-2.6.22/002-adm5120_flash.patch | 26 - .../patches-2.6.22/003-adm5120_switch.patch | 27 - .../patches-2.6.22/004-adm5120_nand.patch | 29 - .../patches-2.6.22/005-adm5120_usb.patch | 66 - .../patches-2.6.22/006-adm5120_leds.patch | 45 - .../patches-2.6.22/007-adm5120_pci.patch | 23 - .../patches-2.6.22/008-adm5120_uart.patch | 53 - .../100-mtd_myloder_partition_parser.patch | 39 - .../101-cfi_fixup_macronix_bootloc.patch | 95 - .../102-jedec_pmc_39lvxxx_chips.patch | 74 - .../patches-2.6.22/140-cmdline_hack.patch | 26 - .../patches-2.6.22/200-amba_pl010_hacks.patch | 297 - .../patches-2.6.22/201-amba_bus_hacks.patch | 15 - target/linux/adm5120-2.6/profiles/100-Atheros.mk | 17 - target/linux/adm5120-2.6/profiles/105-Texas.mk | 17 - target/linux/adm5120-2.6/profiles/110-Ralink.mk | 16 - target/linux/adm5120-2.6/profiles/200-None.mk | 17 - target/linux/adm5120-2.6/profiles/Cellvision.mk | 16 - target/linux/adm5120-2.6/profiles/RB1xx.mk | 17 - target/linux/adm5120/Makefile | 27 + .../adm5120/base-files/default/sbin/wget2nand | 64 + target/linux/adm5120/config/default | 289 + .../linux/adm5120/files/arch/mips/adm5120/Kconfig | 20 + .../linux/adm5120/files/arch/mips/adm5120/Makefile | 15 + .../adm5120/files/arch/mips/adm5120/adm5120_info.c | 93 + .../linux/adm5120/files/arch/mips/adm5120/board.c | 129 + .../files/arch/mips/adm5120/boards/Makefile | 11 + .../files/arch/mips/adm5120/boards/cellvision.c | 192 + .../files/arch/mips/adm5120/boards/compex.c | 222 + .../files/arch/mips/adm5120/boards/edimax.c | 84 + .../files/arch/mips/adm5120/boards/generic.c | 53 + .../files/arch/mips/adm5120/boards/infineon.c | 167 + .../files/arch/mips/adm5120/boards/mikrotik.c | 172 + .../adm5120/files/arch/mips/adm5120/boards/zyxel.c | 127 + .../linux/adm5120/files/arch/mips/adm5120/clock.c | 76 + .../linux/adm5120/files/arch/mips/adm5120/gpio.c | 356 + target/linux/adm5120/files/arch/mips/adm5120/irq.c | 203 + .../linux/adm5120/files/arch/mips/adm5120/memory.c | 179 + .../adm5120/files/arch/mips/adm5120/platform.c | 181 + .../linux/adm5120/files/arch/mips/adm5120/prom.c | 276 + .../adm5120/files/arch/mips/adm5120/prom/Makefile | 9 + .../files/arch/mips/adm5120/prom/bootbase.c | 124 + .../adm5120/files/arch/mips/adm5120/prom/cfe.c | 86 + .../adm5120/files/arch/mips/adm5120/prom/generic.c | 60 + .../files/arch/mips/adm5120/prom/myloader.c | 75 + .../files/arch/mips/adm5120/prom/prom_read.h | 63 + .../files/arch/mips/adm5120/prom/routerboot.c | 142 + .../linux/adm5120/files/arch/mips/adm5120/reset.c | 62 + .../linux/adm5120/files/arch/mips/adm5120/setup.c | 73 + .../linux/adm5120/files/arch/mips/adm5120/time.c | 54 + .../adm5120/files/arch/mips/adm5120/trxsplit.c | 208 + .../adm5120/files/arch/mips/pci/fixup-adm5120.c | 175 + .../adm5120/files/arch/mips/pci/ops-adm5120.c | 143 + .../adm5120/files/arch/mips/pci/pci-adm5120.c | 80 + .../adm5120/files/drivers/leds/leds-adm5120.c | 361 + .../linux/adm5120/files/drivers/leds/leds-gpio.c | 212 + .../adm5120/files/drivers/mtd/maps/adm5120-flash.c | 574 + target/linux/adm5120/files/drivers/mtd/myloader.c | 178 + .../adm5120/files/drivers/mtd/nand/rbmipsnand.c | 207 + target/linux/adm5120/files/drivers/net/adm5120sw.c | 625 + target/linux/adm5120/files/drivers/net/adm5120sw.h | 114 + .../adm5120/files/drivers/serial/adm5120_uart.c | 520 + .../adm5120/files/drivers/usb/host/adm5120-hcd.c | 996 + .../include/asm-mips/mach-adm5120/adm5120_board.h | 50 + .../include/asm-mips/mach-adm5120/adm5120_defs.h | 60 + .../include/asm-mips/mach-adm5120/adm5120_info.h | 92 + .../include/asm-mips/mach-adm5120/adm5120_intc.h | 76 + .../include/asm-mips/mach-adm5120/adm5120_irq.h | 55 + .../include/asm-mips/mach-adm5120/adm5120_mpmc.h | 87 + .../asm-mips/mach-adm5120/adm5120_platform.h | 85 + .../include/asm-mips/mach-adm5120/adm5120_switch.h | 148 + .../include/asm-mips/mach-adm5120/adm5120_uart.h | 75 + .../include/asm-mips/mach-adm5120/asm/sizes.h | 56 + .../asm-mips/mach-adm5120/cpu-feature-overrides.h | 89 + .../files/include/asm-mips/mach-adm5120/gpio.h | 126 + .../files/include/asm-mips/mach-adm5120/prom/cfe.h | 31 + .../include/asm-mips/mach-adm5120/prom/generic.h | 31 + .../include/asm-mips/mach-adm5120/prom/myloader.h | 191 + .../asm-mips/mach-adm5120/prom/routerboot.h | 137 + .../include/asm-mips/mach-adm5120/prom/zynos.h | 98 + .../linux/adm5120/files/include/linux/gpio_leds.h | 37 + target/linux/adm5120/image/Makefile | 177 + target/linux/adm5120/image/lzma-loader/Makefile | 63 + .../adm5120/image/lzma-loader/src/LzmaDecode.c | 589 + .../adm5120/image/lzma-loader/src/LzmaDecode.h | 100 + .../linux/adm5120/image/lzma-loader/src/Makefile | 99 + target/linux/adm5120/image/lzma-loader/src/README | 55 + target/linux/adm5120/image/lzma-loader/src/board.c | 178 + .../linux/adm5120/image/lzma-loader/src/config.h | 119 + .../adm5120/image/lzma-loader/src/decompress.c | 349 + target/linux/adm5120/image/lzma-loader/src/head.S | 209 + .../linux/adm5120/image/lzma-loader/src/loader.lds | 29 + .../adm5120/image/lzma-loader/src/lzma-data.lds | 8 + .../linux/adm5120/image/lzma-loader/src/printf.c | 350 + .../linux/adm5120/image/lzma-loader/src/printf.h | 18 + .../linux/adm5120/patches-2.6.22/001-adm5120.patch | 114 + .../adm5120/patches-2.6.22/002-adm5120_flash.patch | 26 + .../patches-2.6.22/003-adm5120_switch.patch | 27 + .../adm5120/patches-2.6.22/004-adm5120_nand.patch | 29 + .../adm5120/patches-2.6.22/005-adm5120_usb.patch | 66 + .../adm5120/patches-2.6.22/006-adm5120_leds.patch | 45 + .../adm5120/patches-2.6.22/007-adm5120_pci.patch | 23 + .../adm5120/patches-2.6.22/008-adm5120_uart.patch | 53 + .../100-mtd_myloder_partition_parser.patch | 39 + .../101-cfi_fixup_macronix_bootloc.patch | 95 + .../102-jedec_pmc_39lvxxx_chips.patch | 74 + .../adm5120/patches-2.6.22/140-cmdline_hack.patch | 26 + .../patches-2.6.22/200-amba_pl010_hacks.patch | 297 + .../patches-2.6.22/201-amba_bus_hacks.patch | 15 + target/linux/adm5120/profiles/100-Atheros.mk | 17 + target/linux/adm5120/profiles/105-Texas.mk | 17 + target/linux/adm5120/profiles/110-Ralink.mk | 16 + target/linux/adm5120/profiles/200-None.mk | 17 + target/linux/adm5120/profiles/Cellvision.mk | 16 + target/linux/adm5120/profiles/RB1xx.mk | 17 + target/linux/adm5120eb-2.6/Makefile | 27 - target/linux/adm5120eb-2.6/config/default | 261 - target/linux/adm5120eb-2.6/files | 1 - target/linux/adm5120eb-2.6/image/Makefile | 80 - target/linux/adm5120eb-2.6/image/lzma-loader | 1 - target/linux/adm5120eb-2.6/patches-2.6.22 | 1 - target/linux/adm5120eb-2.6/profiles/090-Zyxel.mk | 17 - target/linux/adm5120eb-2.6/profiles/100-Texas.mk | 17 - target/linux/adm5120eb-2.6/profiles/110-Atheros.mk | 17 - target/linux/adm5120eb-2.6/profiles/110-None.mk | 17 - target/linux/adm5120eb/Makefile | 27 + target/linux/adm5120eb/config/default | 261 + target/linux/adm5120eb/files | 1 + target/linux/adm5120eb/image/Makefile | 80 + target/linux/adm5120eb/image/lzma-loader | 1 + target/linux/adm5120eb/patches-2.6.22 | 1 + target/linux/adm5120eb/profiles/090-Zyxel.mk | 17 + target/linux/adm5120eb/profiles/100-Texas.mk | 17 + target/linux/adm5120eb/profiles/110-Atheros.mk | 17 + target/linux/adm5120eb/profiles/110-None.mk | 17 + target/linux/amazon-2.6/Makefile | 25 - .../base-files/default/etc/config/network | 14 - target/linux/amazon-2.6/config/default | 211 - .../amazon-2.6/files/arch/mips/amazon/Kconfig | 63 - .../amazon-2.6/files/arch/mips/amazon/Makefile | 9 - .../amazon-2.6/files/arch/mips/amazon/dma-core.c | 1455 -- .../amazon-2.6/files/arch/mips/amazon/dma-core.h | 69 - .../amazon-2.6/files/arch/mips/amazon/interrupt.c | 186 - .../linux/amazon-2.6/files/arch/mips/amazon/pci.c | 293 - .../linux/amazon-2.6/files/arch/mips/amazon/prom.c | 77 - .../amazon-2.6/files/arch/mips/amazon/setup.c | 186 - .../amazon-2.6/files/drivers/atm/amazon_tpe.c | 3074 --- .../linux/amazon-2.6/files/drivers/char/admmod.c | 1486 -- .../amazon-2.6/files/drivers/char/amazon_mei.c | 7918 ------ .../linux/amazon-2.6/files/drivers/char/ifx_ssc.c | 2121 -- .../files/drivers/char/watchdog/amazon_wdt.c | 246 - .../amazon-2.6/files/drivers/mtd/maps/amazon.c | 166 - .../linux/amazon-2.6/files/drivers/net/amazon_sw.c | 876 - .../amazon-2.6/files/drivers/serial/amazon_asc.c | 685 - .../files/include/asm-mips/amazon/adm6996.h | 232 - .../files/include/asm-mips/amazon/amazon.h | 1440 -- .../files/include/asm-mips/amazon/amazon_dma.h | 148 - .../files/include/asm-mips/amazon/amazon_mei.h | 220 - .../files/include/asm-mips/amazon/amazon_mei_app.h | 54 - .../include/asm-mips/amazon/amazon_mei_app_ioctl.h | 1169 - .../include/asm-mips/amazon/amazon_mei_ioctl.h | 757 - .../files/include/asm-mips/amazon/amazon_sw.h | 176 - .../files/include/asm-mips/amazon/amazon_tpe.h | 258 - .../files/include/asm-mips/amazon/amazon_wdt.h | 23 - .../files/include/asm-mips/amazon/atm_defines.h | 540 - .../files/include/asm-mips/amazon/atm_mib.h | 142 - .../asm-mips/amazon/ifx_peripheral_definitions.h | 96 - .../files/include/asm-mips/amazon/ifx_ssc.h | 263 - .../include/asm-mips/amazon/ifx_ssc_defines.h | 552 - .../amazon-2.6/files/include/asm-mips/amazon/irq.h | 200 - .../files/include/asm-mips/amazon/model.h | 29 - .../files/include/asm-mips/amazon/port.h | 72 - .../files/include/asm-mips/amazon/serial.h | 146 - .../files/include/asm-mips/mach-amazon/irq.h | 7 - .../include/asm-mips/mach-amazon/mangle-port.h | 52 - target/linux/amazon-2.6/image/Makefile | 30 - .../linux/amazon-2.6/patches/017-wdt-driver.patch | 10 - target/linux/amazon-2.6/patches/100-board.patch | 63 - .../amazon-2.6/patches/110-char_drivers.patch | 12 - .../linux/amazon-2.6/patches/130-mtd_drivers.patch | 9 - .../linux/amazon-2.6/patches/140-net_drivers.patch | 10 - .../amazon-2.6/patches/150-serial_driver.patch | 12 - target/linux/amazon-2.6/patches/160-cfi-swap.patch | 14 - target/linux/amazon/Makefile | 25 + .../amazon/base-files/default/etc/config/network | 14 + target/linux/amazon/config/default | 211 + target/linux/amazon/files/arch/mips/amazon/Kconfig | 63 + .../linux/amazon/files/arch/mips/amazon/Makefile | 9 + .../linux/amazon/files/arch/mips/amazon/dma-core.c | 1455 ++ .../linux/amazon/files/arch/mips/amazon/dma-core.h | 69 + .../amazon/files/arch/mips/amazon/interrupt.c | 186 + target/linux/amazon/files/arch/mips/amazon/pci.c | 293 + target/linux/amazon/files/arch/mips/amazon/prom.c | 77 + target/linux/amazon/files/arch/mips/amazon/setup.c | 186 + target/linux/amazon/files/drivers/atm/amazon_tpe.c | 3074 +++ target/linux/amazon/files/drivers/char/admmod.c | 1486 ++ .../linux/amazon/files/drivers/char/amazon_mei.c | 7918 ++++++ target/linux/amazon/files/drivers/char/ifx_ssc.c | 2121 ++ .../files/drivers/char/watchdog/amazon_wdt.c | 246 + .../linux/amazon/files/drivers/mtd/maps/amazon.c | 166 + target/linux/amazon/files/drivers/net/amazon_sw.c | 876 + .../linux/amazon/files/drivers/serial/amazon_asc.c | 685 + .../amazon/files/include/asm-mips/amazon/adm6996.h | 232 + .../amazon/files/include/asm-mips/amazon/amazon.h | 1440 ++ .../files/include/asm-mips/amazon/amazon_dma.h | 148 + .../files/include/asm-mips/amazon/amazon_mei.h | 220 + .../files/include/asm-mips/amazon/amazon_mei_app.h | 54 + .../include/asm-mips/amazon/amazon_mei_app_ioctl.h | 1169 + .../include/asm-mips/amazon/amazon_mei_ioctl.h | 757 + .../files/include/asm-mips/amazon/amazon_sw.h | 176 + .../files/include/asm-mips/amazon/amazon_tpe.h | 258 + .../files/include/asm-mips/amazon/amazon_wdt.h | 23 + .../files/include/asm-mips/amazon/atm_defines.h | 540 + .../amazon/files/include/asm-mips/amazon/atm_mib.h | 142 + .../asm-mips/amazon/ifx_peripheral_definitions.h | 96 + .../amazon/files/include/asm-mips/amazon/ifx_ssc.h | 263 + .../include/asm-mips/amazon/ifx_ssc_defines.h | 552 + .../amazon/files/include/asm-mips/amazon/irq.h | 200 + .../amazon/files/include/asm-mips/amazon/model.h | 29 + .../amazon/files/include/asm-mips/amazon/port.h | 72 + .../amazon/files/include/asm-mips/amazon/serial.h | 146 + .../files/include/asm-mips/mach-amazon/irq.h | 7 + .../include/asm-mips/mach-amazon/mangle-port.h | 52 + target/linux/amazon/image/Makefile | 30 + target/linux/amazon/patches/017-wdt-driver.patch | 10 + target/linux/amazon/patches/100-board.patch | 63 + target/linux/amazon/patches/110-char_drivers.patch | 12 + target/linux/amazon/patches/130-mtd_drivers.patch | 9 + target/linux/amazon/patches/140-net_drivers.patch | 10 + .../linux/amazon/patches/150-serial_driver.patch | 12 + target/linux/amazon/patches/160-cfi-swap.patch | 14 + target/linux/amcc-2.6/Makefile | 25 - .../linux/amcc-2.6/base-files/default/etc/inittab | 5 - target/linux/amcc-2.6/config/default | 172 - target/linux/amcc-2.6/image/Makefile | 39 - .../linux/amcc-2.6/patches/100-taishan_emac.patch | 71 - .../amcc-2.6/patches/110-openwrt_mtd_mapping.patch | 29 - .../amcc-2.6/patches/120-uncompressed_uImage.patch | 17 - target/linux/amcc/Makefile | 25 + target/linux/amcc/base-files/default/etc/inittab | 5 + target/linux/amcc/config/default | 172 + target/linux/amcc/image/Makefile | 39 + target/linux/amcc/patches/100-taishan_emac.patch | 71 + .../amcc/patches/110-openwrt_mtd_mapping.patch | 29 + .../amcc/patches/120-uncompressed_uImage.patch | 17 + target/linux/ar7-2.6/Makefile | 24 - target/linux/ar7-2.6/base-files.mk | 11 - .../ar7-2.6/base-files/default/etc/config/network | 41 - .../linux/ar7-2.6/base-files/default/etc/diag.sh | 19 - .../ar7-2.6/base-files/default/etc/init.d/adam2 | 13 - target/linux/ar7-2.6/config/default | 199 - target/linux/ar7-2.6/files/arch/mips/ar7/Makefile | 16 - target/linux/ar7-2.6/files/arch/mips/ar7/clock.c | 470 - target/linux/ar7-2.6/files/arch/mips/ar7/gpio.c | 56 - target/linux/ar7-2.6/files/arch/mips/ar7/irq.c | 205 - target/linux/ar7-2.6/files/arch/mips/ar7/memory.c | 75 - .../linux/ar7-2.6/files/arch/mips/ar7/platform.c | 412 - target/linux/ar7-2.6/files/arch/mips/ar7/prom.c | 327 - target/linux/ar7-2.6/files/arch/mips/ar7/setup.c | 124 - target/linux/ar7-2.6/files/arch/mips/ar7/time.c | 59 - .../linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c | 402 - target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c | 553 - target/linux/ar7-2.6/files/drivers/char/ar7_gpio.c | 161 - .../ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c | 345 - target/linux/ar7-2.6/files/drivers/leds/leds-ar7.c | 132 - target/linux/ar7-2.6/files/drivers/mtd/ar7part.c | 140 - target/linux/ar7-2.6/files/drivers/net/cpmac.c | 1222 - .../linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h | 167 - .../ar7-2.6/files/include/asm-mips/ar7/gpio.h | 116 - .../ar7-2.6/files/include/asm-mips/ar7/mmzone.h | 29 - .../ar7-2.6/files/include/asm-mips/ar7/prom.h | 27 - .../ar7-2.6/files/include/asm-mips/ar7/spaces.h | 32 - .../ar7-2.6/files/include/asm-mips/ar7/vlynq.h | 92 - target/linux/ar7-2.6/files/include/asm-mips/gpio.h | 0 target/linux/ar7-2.6/image/Makefile | 81 - .../ar7-2.6/patches-2.6.22/100-board_support.patch | 75 - .../linux/ar7-2.6/patches-2.6.22/110-flash.patch | 39 - .../ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch | 30 - target/linux/ar7-2.6/patches-2.6.22/130-leds.patch | 27 - .../ar7-2.6/patches-2.6.22/140-watchdog.patch | 27 - .../patches-2.6.22/200-ethernet_driver.patch | 30 - .../ar7-2.6/patches-2.6.22/210-phy_fixed.patch | 93 - .../ar7-2.6/patches-2.6.22/500-serial_kludge.patch | 62 - target/linux/ar7-2.6/profiles/100-Texas.mk | 17 - target/linux/ar7-2.6/profiles/110-None.mk | 17 - target/linux/ar7-2.6/src/adam2patcher.c | 59 - target/linux/ar7/Makefile | 24 + target/linux/ar7/base-files.mk | 11 + .../ar7/base-files/default/etc/config/network | 41 + target/linux/ar7/base-files/default/etc/diag.sh | 19 + .../linux/ar7/base-files/default/etc/init.d/adam2 | 13 + target/linux/ar7/config/default | 199 + target/linux/ar7/files/arch/mips/ar7/Makefile | 16 + target/linux/ar7/files/arch/mips/ar7/clock.c | 470 + target/linux/ar7/files/arch/mips/ar7/gpio.c | 56 + target/linux/ar7/files/arch/mips/ar7/irq.c | 205 + target/linux/ar7/files/arch/mips/ar7/memory.c | 75 + target/linux/ar7/files/arch/mips/ar7/platform.c | 412 + target/linux/ar7/files/arch/mips/ar7/prom.c | 327 + target/linux/ar7/files/arch/mips/ar7/setup.c | 124 + target/linux/ar7/files/arch/mips/ar7/time.c | 59 + target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c | 402 + target/linux/ar7/files/arch/mips/ar7/vlynq.c | 553 + target/linux/ar7/files/drivers/char/ar7_gpio.c | 161 + .../ar7/files/drivers/char/watchdog/ar7_wdt.c | 345 + target/linux/ar7/files/drivers/leds/leds-ar7.c | 132 + target/linux/ar7/files/drivers/mtd/ar7part.c | 140 + target/linux/ar7/files/drivers/net/cpmac.c | 1222 + target/linux/ar7/files/include/asm-mips/ar7/ar7.h | 167 + target/linux/ar7/files/include/asm-mips/ar7/gpio.h | 116 + .../linux/ar7/files/include/asm-mips/ar7/mmzone.h | 29 + target/linux/ar7/files/include/asm-mips/ar7/prom.h | 27 + .../linux/ar7/files/include/asm-mips/ar7/spaces.h | 32 + .../linux/ar7/files/include/asm-mips/ar7/vlynq.h | 92 + target/linux/ar7/files/include/asm-mips/gpio.h | 0 target/linux/ar7/image/Makefile | 81 + .../ar7/patches-2.6.22/100-board_support.patch | 75 + target/linux/ar7/patches-2.6.22/110-flash.patch | 39 + .../linux/ar7/patches-2.6.22/120-gpio_chrdev.patch | 30 + target/linux/ar7/patches-2.6.22/130-leds.patch | 27 + target/linux/ar7/patches-2.6.22/140-watchdog.patch | 27 + .../ar7/patches-2.6.22/200-ethernet_driver.patch | 30 + .../linux/ar7/patches-2.6.22/210-phy_fixed.patch | 93 + .../ar7/patches-2.6.22/500-serial_kludge.patch | 62 + target/linux/ar7/profiles/100-Texas.mk | 17 + target/linux/ar7/profiles/110-None.mk | 17 + target/linux/ar7/src/adam2patcher.c | 59 + target/linux/at91-2.6/Makefile | 27 - .../linux/at91-2.6/base-files/default/etc/inittab | 6 - .../at91-2.6/base-files/default/etc/ipkg.conf | 3 - target/linux/at91-2.6/config/default | 305 - target/linux/at91-2.6/files/drivers/mtd/at91part.c | 121 - target/linux/at91-2.6/image/Config.in | 35 - target/linux/at91-2.6/image/Makefile | 45 - target/linux/at91-2.6/image/dfboot/Makefile | 35 - target/linux/at91-2.6/image/dfboot/src/Makefile | 94 - target/linux/at91-2.6/image/dfboot/src/_udivsi3.S | 77 - target/linux/at91-2.6/image/dfboot/src/_umodsi3.S | 88 - target/linux/at91-2.6/image/dfboot/src/asm_isr.S | 75 - .../linux/at91-2.6/image/dfboot/src/asm_mci_isr.S | 75 - target/linux/at91-2.6/image/dfboot/src/at45.c | 595 - target/linux/at91-2.6/image/dfboot/src/com.c | 368 - target/linux/at91-2.6/image/dfboot/src/com.h | 28 - target/linux/at91-2.6/image/dfboot/src/config.h | 17 - .../linux/at91-2.6/image/dfboot/src/cstartup_ram.S | 144 - target/linux/at91-2.6/image/dfboot/src/dataflash.c | 208 - target/linux/at91-2.6/image/dfboot/src/dataflash.h | 181 - target/linux/at91-2.6/image/dfboot/src/div0.c | 28 - .../at91-2.6/image/dfboot/src/elf32-littlearm.lds | 19 - .../at91-2.6/image/dfboot/src/embedded_services.h | 500 - .../image/dfboot/src/include/AT91C_MCI_Device.h | 379 - .../at91-2.6/image/dfboot/src/include/AT91RM9200.h | 2745 -- .../image/dfboot/src/include/AT91RM9200.inc | 2437 -- .../image/dfboot/src/include/AT91RM9200_inc.h | 2401 -- .../linux/at91-2.6/image/dfboot/src/include/led.h | 49 - .../image/dfboot/src/include/lib_AT91RM9200.h | 2978 --- target/linux/at91-2.6/image/dfboot/src/init.c | 165 - target/linux/at91-2.6/image/dfboot/src/jump.S | 4 - target/linux/at91-2.6/image/dfboot/src/led.c | 103 - target/linux/at91-2.6/image/dfboot/src/main.c | 811 - target/linux/at91-2.6/image/dfboot/src/main.h | 43 - .../linux/at91-2.6/image/dfboot/src/mci_device.c | 743 - target/linux/at91-2.6/image/dfboot/src/stdio.h | 18 - target/linux/at91-2.6/image/u-boot/Makefile | 50 - .../image/u-boot/patches/001-lowlevel-config.patch | 91 - .../u-boot/patches/002-dataflash_machine.patch | 6065 ----- .../image/u-boot/patches/003-mac_init.patch | 14 - .../image/u-boot/patches/004-mac_config.patch | 15 - .../image/u-boot/patches/005-remove_float.patch | 13 - .../image/u-boot/patches/006-generate_params.patch | 115 - .../image/u-boot/patches/007-ubparams_bugfix.patch | 11 - .../image/u-boot/patches/008-ubparams_bugfix.patch | 10 - .../image/u-boot/patches/009-mac_init_bugfix.patch | 12 - .../u-boot/patches/010-irda-patch-remove.patch | 13 - .../image/u-boot/patches/011-ubparams_update.patch | 19 - .../image/u-boot/patches/012-make_3.81.patch | 16 - .../u-boot/patches/013-params-in-config.patch | 24 - .../image/u-boot/patches/014-ubparam-kernel.patch | 11 - .../linux/at91-2.6/image/u-boot/ubclient/Makefile | 15 - .../linux/at91-2.6/image/u-boot/ubclient/ubpar.c | 135 - .../at91-2.6/patches-2.6.21/000-at91patches.patch | 10312 -------- .../patches-2.6.21/001-vlink-machine.patch | 211 - .../at91-2.6/patches-2.6.21/002-led-driver.patch | 189 - .../at91-2.6/patches-2.6.21/003-gpio-driver.patch | 355 - .../at91-2.6/patches-2.6.21/006-change-gpios.patch | 36 - .../patches-2.6.21/007-mtd-partition.patch | 36 - .../at91-2.6/patches-2.6.21/008-fdl-serial.patch | 160 - .../at91-2.6/patches-2.6.21/009-fdl-uartinit.patch | 34 - .../patches-2.6.21/010-dm9161a-phyfix.patch | 28 - .../patches-2.6.21/011-vlink-resetfix.patch | 10 - .../at91-2.6/patches-2.6.21/012-at91-mmcfix.patch | 424 - .../patches-2.6.21/013-at91-mmc1wire.patch | 12 - .../patches-2.6.21/014-initpartition.patch | 18 - .../linux/at91-2.6/patches-2.6.22/000-at91.patch | 9932 -------- .../patches-2.6.22/001-vlink-machine.patch | 246 - .../at91-2.6/patches-2.6.22/002-led-driver.patch | 121 - .../at91-2.6/patches-2.6.22/003-gpio-driver.patch | 359 - .../patches-2.6.22/007-mtd-partition.patch | 39 - .../at91-2.6/patches-2.6.22/008-fdl-serial.patch | 160 - .../at91-2.6/patches-2.6.22/009-fdl-uartinit.patch | 27 - .../patches-2.6.22/010-dm9161a-phyfix.patch | 28 - .../patches-2.6.22/014-initpartition.patch | 19 - target/linux/at91/Makefile | 27 + target/linux/at91/base-files/default/etc/inittab | 6 + target/linux/at91/base-files/default/etc/ipkg.conf | 3 + target/linux/at91/config/default | 305 + target/linux/at91/files/drivers/mtd/at91part.c | 121 + target/linux/at91/image/Config.in | 35 + target/linux/at91/image/Makefile | 45 + target/linux/at91/image/dfboot/Makefile | 35 + target/linux/at91/image/dfboot/src/Makefile | 94 + target/linux/at91/image/dfboot/src/_udivsi3.S | 77 + target/linux/at91/image/dfboot/src/_umodsi3.S | 88 + target/linux/at91/image/dfboot/src/asm_isr.S | 75 + target/linux/at91/image/dfboot/src/asm_mci_isr.S | 75 + target/linux/at91/image/dfboot/src/at45.c | 595 + target/linux/at91/image/dfboot/src/com.c | 368 + target/linux/at91/image/dfboot/src/com.h | 28 + target/linux/at91/image/dfboot/src/config.h | 17 + target/linux/at91/image/dfboot/src/cstartup_ram.S | 144 + target/linux/at91/image/dfboot/src/dataflash.c | 208 + target/linux/at91/image/dfboot/src/dataflash.h | 181 + target/linux/at91/image/dfboot/src/div0.c | 28 + .../at91/image/dfboot/src/elf32-littlearm.lds | 19 + .../at91/image/dfboot/src/embedded_services.h | 500 + .../image/dfboot/src/include/AT91C_MCI_Device.h | 379 + .../at91/image/dfboot/src/include/AT91RM9200.h | 2745 ++ .../at91/image/dfboot/src/include/AT91RM9200.inc | 2437 ++ .../at91/image/dfboot/src/include/AT91RM9200_inc.h | 2401 ++ target/linux/at91/image/dfboot/src/include/led.h | 49 + .../at91/image/dfboot/src/include/lib_AT91RM9200.h | 2978 +++ target/linux/at91/image/dfboot/src/init.c | 165 + target/linux/at91/image/dfboot/src/jump.S | 4 + target/linux/at91/image/dfboot/src/led.c | 103 + target/linux/at91/image/dfboot/src/main.c | 811 + target/linux/at91/image/dfboot/src/main.h | 43 + target/linux/at91/image/dfboot/src/mci_device.c | 743 + target/linux/at91/image/dfboot/src/stdio.h | 18 + target/linux/at91/image/u-boot/Makefile | 50 + .../image/u-boot/patches/001-lowlevel-config.patch | 91 + .../u-boot/patches/002-dataflash_machine.patch | 6065 +++++ .../at91/image/u-boot/patches/003-mac_init.patch | 14 + .../at91/image/u-boot/patches/004-mac_config.patch | 15 + .../image/u-boot/patches/005-remove_float.patch | 13 + .../image/u-boot/patches/006-generate_params.patch | 115 + .../image/u-boot/patches/007-ubparams_bugfix.patch | 11 + .../image/u-boot/patches/008-ubparams_bugfix.patch | 10 + .../image/u-boot/patches/009-mac_init_bugfix.patch | 12 + .../u-boot/patches/010-irda-patch-remove.patch | 13 + .../image/u-boot/patches/011-ubparams_update.patch | 19 + .../at91/image/u-boot/patches/012-make_3.81.patch | 16 + .../u-boot/patches/013-params-in-config.patch | 24 + .../image/u-boot/patches/014-ubparam-kernel.patch | 11 + target/linux/at91/image/u-boot/ubclient/Makefile | 15 + target/linux/at91/image/u-boot/ubclient/ubpar.c | 135 + .../at91/patches-2.6.21/000-at91patches.patch | 10312 ++++++++ .../at91/patches-2.6.21/001-vlink-machine.patch | 211 + .../linux/at91/patches-2.6.21/002-led-driver.patch | 189 + .../at91/patches-2.6.21/003-gpio-driver.patch | 355 + .../at91/patches-2.6.21/006-change-gpios.patch | 36 + .../at91/patches-2.6.21/007-mtd-partition.patch | 36 + .../linux/at91/patches-2.6.21/008-fdl-serial.patch | 160 + .../at91/patches-2.6.21/009-fdl-uartinit.patch | 34 + .../at91/patches-2.6.21/010-dm9161a-phyfix.patch | 28 + .../at91/patches-2.6.21/011-vlink-resetfix.patch | 10 + .../at91/patches-2.6.21/012-at91-mmcfix.patch | 424 + .../at91/patches-2.6.21/013-at91-mmc1wire.patch | 12 + .../at91/patches-2.6.21/014-initpartition.patch | 18 + target/linux/at91/patches-2.6.22/000-at91.patch | 9932 ++++++++ .../at91/patches-2.6.22/001-vlink-machine.patch | 246 + .../linux/at91/patches-2.6.22/002-led-driver.patch | 121 + .../at91/patches-2.6.22/003-gpio-driver.patch | 359 + .../at91/patches-2.6.22/007-mtd-partition.patch | 39 + .../linux/at91/patches-2.6.22/008-fdl-serial.patch | 160 + .../at91/patches-2.6.22/009-fdl-uartinit.patch | 27 + .../at91/patches-2.6.22/010-dm9161a-phyfix.patch | 28 + .../at91/patches-2.6.22/014-initpartition.patch | 19 + target/linux/atheros-2.6/Makefile | 26 - .../base-files/default/etc/preinit.arch | 8 - target/linux/atheros-2.6/config/default | 194 - .../atheros-2.6/files/arch/mips/atheros/Kconfig | 13 - .../atheros-2.6/files/arch/mips/atheros/Makefile | 13 - .../files/arch/mips/atheros/ar5312/Makefile | 11 - .../files/arch/mips/atheros/ar5312/ar5312.h | 234 - .../files/arch/mips/atheros/ar5312/board.c | 449 - .../files/arch/mips/atheros/ar5312/irq.c | 174 - .../files/arch/mips/atheros/ar5315/Makefile | 11 - .../files/arch/mips/atheros/ar5315/ar5315.h | 688 - .../files/arch/mips/atheros/ar5315/board.c | 366 - .../files/arch/mips/atheros/ar5315/irq.c | 330 - .../atheros-2.6/files/arch/mips/atheros/ar531x.h | 166 - .../atheros-2.6/files/arch/mips/atheros/board.c | 207 - .../atheros-2.6/files/arch/mips/atheros/prom.c | 46 - .../atheros-2.6/files/arch/mips/atheros/reset.c | 108 - .../files/drivers/mtd/devices/spiflash.c | 533 - .../files/drivers/mtd/devices/spiflash.h | 120 - .../atheros-2.6/files/drivers/net/ar2313/Makefile | 5 - .../atheros-2.6/files/drivers/net/ar2313/ar2313.c | 1457 -- .../atheros-2.6/files/drivers/net/ar2313/ar2313.h | 193 - .../atheros-2.6/files/drivers/net/ar2313/dma.h | 142 - .../asm-mips/mach-atheros/ar531x_platform.h | 28 - .../include/asm-mips/mach-atheros/dma-coherence.h | 45 - target/linux/atheros-2.6/image/Makefile | 28 - target/linux/atheros-2.6/patches/100-board.patch | 68 - .../linux/atheros-2.6/patches/110-spiflash.patch | 22 - .../atheros-2.6/patches/130-ar2313_ethernet.patch | 27 - .../patches/140-redboot_partition_scan.patch | 24 - target/linux/atheros/Makefile | 26 + .../atheros/base-files/default/etc/preinit.arch | 8 + target/linux/atheros/config/default | 194 + .../linux/atheros/files/arch/mips/atheros/Kconfig | 13 + .../linux/atheros/files/arch/mips/atheros/Makefile | 13 + .../files/arch/mips/atheros/ar5312/Makefile | 11 + .../files/arch/mips/atheros/ar5312/ar5312.h | 234 + .../atheros/files/arch/mips/atheros/ar5312/board.c | 449 + .../atheros/files/arch/mips/atheros/ar5312/irq.c | 174 + .../files/arch/mips/atheros/ar5315/Makefile | 11 + .../files/arch/mips/atheros/ar5315/ar5315.h | 688 + .../atheros/files/arch/mips/atheros/ar5315/board.c | 366 + .../atheros/files/arch/mips/atheros/ar5315/irq.c | 330 + .../linux/atheros/files/arch/mips/atheros/ar531x.h | 166 + .../linux/atheros/files/arch/mips/atheros/board.c | 207 + .../linux/atheros/files/arch/mips/atheros/prom.c | 46 + .../linux/atheros/files/arch/mips/atheros/reset.c | 108 + .../atheros/files/drivers/mtd/devices/spiflash.c | 533 + .../atheros/files/drivers/mtd/devices/spiflash.h | 120 + .../atheros/files/drivers/net/ar2313/Makefile | 5 + .../atheros/files/drivers/net/ar2313/ar2313.c | 1457 ++ .../atheros/files/drivers/net/ar2313/ar2313.h | 193 + .../linux/atheros/files/drivers/net/ar2313/dma.h | 142 + .../asm-mips/mach-atheros/ar531x_platform.h | 28 + .../include/asm-mips/mach-atheros/dma-coherence.h | 45 + target/linux/atheros/image/Makefile | 28 + target/linux/atheros/patches/100-board.patch | 68 + target/linux/atheros/patches/110-spiflash.patch | 22 + .../atheros/patches/130-ar2313_ethernet.patch | 27 + .../patches/140-redboot_partition_scan.patch | 24 + target/linux/au1000-2.6/Makefile | 34 - .../au1000-2.6/base-files/default/etc/diag.sh | 25 - target/linux/au1000-2.6/config/default | 252 - .../au1000-2.6/files/drivers/leds/leds-mtx1.c | 101 - target/linux/au1000-2.6/image/Makefile | 66 - .../linux/au1000-2.6/patches/001-au1x00_gpio.patch | 294 - .../patches/005-au1000_eth_link_beat.patch | 24 - .../patches/006-mtx1_system_button.patch | 241 - .../linux/au1000-2.6/patches/011-mtx1_leds.patch | 28 - .../au1000-2.6/patches/012-mtx1_cmdline.patch | 19 - .../au1000-2.6/patches/013-openwrt_rootfs.patch | 11 - .../au1000-2.6/patches/014-au1000_eth_ioctl.patch | 15 - .../au1000-2.6/patches/015-pci-resource.patch | 14 - .../linux/au1000-2.6/patches/016-pci-io_map.patch | 10 - .../linux/au1000-2.6/patches/017-usb-power.patch | 11 - target/linux/au1000-2.6/profiles/Atheros.mk | 13 - target/linux/au1000-2.6/profiles/Broadcom.mk | 13 - target/linux/au1000-2.6/profiles/Intel.mk | 13 - target/linux/au1000/Makefile | 34 + target/linux/au1000/base-files/default/etc/diag.sh | 25 + target/linux/au1000/config/default | 252 + target/linux/au1000/files/drivers/leds/leds-mtx1.c | 101 + target/linux/au1000/image/Makefile | 66 + target/linux/au1000/patches/001-au1x00_gpio.patch | 294 + .../au1000/patches/005-au1000_eth_link_beat.patch | 24 + .../au1000/patches/006-mtx1_system_button.patch | 241 + target/linux/au1000/patches/011-mtx1_leds.patch | 28 + target/linux/au1000/patches/012-mtx1_cmdline.patch | 19 + .../linux/au1000/patches/013-openwrt_rootfs.patch | 11 + .../au1000/patches/014-au1000_eth_ioctl.patch | 15 + target/linux/au1000/patches/015-pci-resource.patch | 14 + target/linux/au1000/patches/016-pci-io_map.patch | 10 + target/linux/au1000/patches/017-usb-power.patch | 11 + target/linux/au1000/profiles/Atheros.mk | 13 + target/linux/au1000/profiles/Broadcom.mk | 13 + target/linux/au1000/profiles/Intel.mk | 13 + target/linux/avr32-2.6/Makefile | 27 - target/linux/avr32-2.6/config/default | 106 - target/linux/avr32-2.6/image/Makefile | 37 - target/linux/avr32-2.6/patches/100-git_sync.patch | 12681 ---------- .../avr32-2.6/patches/110-openwrt_flashmap.patch | 20 - target/linux/avr32/Makefile | 27 + target/linux/avr32/config/default | 106 + target/linux/avr32/image/Makefile | 37 + target/linux/avr32/patches/100-git_sync.patch | 12681 ++++++++++ .../linux/avr32/patches/110-openwrt_flashmap.patch | 20 + target/linux/brcm-2.4/Makefile | 2 +- target/linux/brcm47xx-2.6/Makefile | 27 - target/linux/brcm47xx-2.6/base-files | 1 - target/linux/brcm47xx-2.6/base-files.mk | 1 - target/linux/brcm47xx-2.6/config/default | 277 - .../brcm47xx-2.6/files/arch/mips/bcm947xx/Makefile | 7 - .../files/arch/mips/bcm947xx/cfe_env.c | 229 - .../files/arch/mips/bcm947xx/include/nvram.h | 37 - .../brcm47xx-2.6/files/arch/mips/bcm947xx/irq.c | 63 - .../brcm47xx-2.6/files/arch/mips/bcm947xx/nvram.c | 125 - .../brcm47xx-2.6/files/arch/mips/bcm947xx/prom.c | 61 - .../brcm47xx-2.6/files/arch/mips/bcm947xx/setup.c | 163 - .../brcm47xx-2.6/files/arch/mips/bcm947xx/time.c | 62 - .../brcm47xx-2.6/files/arch/mips/cfe/Makefile | 5 - .../linux/brcm47xx-2.6/files/arch/mips/cfe/cfe.c | 533 - .../brcm47xx-2.6/files/arch/mips/cfe/cfe_private.h | 176 - .../files/drivers/mtd/maps/bcm47xx-flash.c | 439 - .../brcm47xx-2.6/files/include/asm-generic/gpio.h | 0 .../brcm47xx-2.6/files/include/asm-mips/cfe.h | 189 - .../files/include/asm-mips/mach-bcm947xx/gpio.h | 88 - .../asm-mips/mach-bcm947xx/kernel-entry-init.h | 26 - target/linux/brcm47xx-2.6/image | 1 - .../patches-2.6.22/100-board_support.patch | 211 - .../patches-2.6.22/110-flash_map.patch | 29 - .../patches-2.6.22/120-b44_ssb_support.patch | 1547 -- .../patches-2.6.22/130-remove_scache.patch | 95 - .../patches-2.6.22/150-cpu_fixes.patch | 643 - .../patches-2.6.22/160-kmap_coherent.patch | 63 - .../brcm47xx-2.6/patches-2.6.22/170-cpu_wait.patch | 12 - .../patches-2.6.22/200-b44_ssb_fixup.patch | 256 - .../patches-2.6.22/210-ssb_fixes.patch | 372 - .../patches-2.6.22/230-ssb_arch_setup.patch | 33 - .../patches-2.6.22/240-extif_fixes.patch | 152 - target/linux/brcm47xx-2.6/profiles/100-Atheros.mk | 17 - target/linux/brcm47xx-2.6/profiles/110-None.mk | 17 - target/linux/brcm47xx-2.6/profiles/WGT634U.mk | 17 - target/linux/brcm47xx-2.6/profiles/WRTSL54GS.mk | 17 - target/linux/brcm47xx-2.6/src | 1 - target/linux/brcm47xx/Makefile | 27 + target/linux/brcm47xx/base-files | 1 + target/linux/brcm47xx/base-files.mk | 1 + target/linux/brcm47xx/config/default | 277 + .../brcm47xx/files/arch/mips/bcm947xx/Makefile | 7 + .../brcm47xx/files/arch/mips/bcm947xx/cfe_env.c | 229 + .../files/arch/mips/bcm947xx/include/nvram.h | 37 + .../linux/brcm47xx/files/arch/mips/bcm947xx/irq.c | 63 + .../brcm47xx/files/arch/mips/bcm947xx/nvram.c | 125 + .../linux/brcm47xx/files/arch/mips/bcm947xx/prom.c | 61 + .../brcm47xx/files/arch/mips/bcm947xx/setup.c | 163 + .../linux/brcm47xx/files/arch/mips/bcm947xx/time.c | 62 + target/linux/brcm47xx/files/arch/mips/cfe/Makefile | 5 + target/linux/brcm47xx/files/arch/mips/cfe/cfe.c | 533 + .../brcm47xx/files/arch/mips/cfe/cfe_private.h | 176 + .../files/drivers/mtd/maps/bcm47xx-flash.c | 439 + .../brcm47xx/files/include/asm-generic/gpio.h | 0 target/linux/brcm47xx/files/include/asm-mips/cfe.h | 189 + .../files/include/asm-mips/mach-bcm947xx/gpio.h | 88 + .../asm-mips/mach-bcm947xx/kernel-entry-init.h | 26 + target/linux/brcm47xx/image | 1 + .../patches-2.6.22/100-board_support.patch | 211 + .../brcm47xx/patches-2.6.22/110-flash_map.patch | 29 + .../patches-2.6.22/120-b44_ssb_support.patch | 1547 ++ .../patches-2.6.22/130-remove_scache.patch | 95 + .../brcm47xx/patches-2.6.22/150-cpu_fixes.patch | 643 + .../patches-2.6.22/160-kmap_coherent.patch | 63 + .../brcm47xx/patches-2.6.22/170-cpu_wait.patch | 12 + .../patches-2.6.22/200-b44_ssb_fixup.patch | 256 + .../brcm47xx/patches-2.6.22/210-ssb_fixes.patch | 372 + .../patches-2.6.22/230-ssb_arch_setup.patch | 33 + .../brcm47xx/patches-2.6.22/240-extif_fixes.patch | 152 + target/linux/brcm47xx/profiles/100-Atheros.mk | 17 + target/linux/brcm47xx/profiles/110-None.mk | 17 + target/linux/brcm47xx/profiles/WGT634U.mk | 17 + target/linux/brcm47xx/profiles/WRTSL54GS.mk | 17 + target/linux/brcm47xx/src | 1 + target/linux/brcm63xx-2.6/Makefile | 26 - target/linux/brcm63xx-2.6/config/default | 352 - .../brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile | 9 - .../brcm63xx-2.6/files/arch/mips/bcm963xx/info.c | 102 - .../files/arch/mips/bcm963xx/int-handler.S | 59 - .../brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c | 258 - .../brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c | 73 - .../files/arch/mips/bcm963xx/ser_init.c | 181 - .../brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c | 472 - .../brcm63xx-2.6/files/arch/mips/bcm963xx/time.c | 116 - .../brcm63xx-2.6/files/arch/mips/bcm963xx/wdt.c | 246 - .../brcm63xx-2.6/files/arch/mips/cfe/Makefile | 5 - .../linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c | 533 - .../brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h | 176 - .../files/arch/mips/pci/fixup-bcm96348.c | 95 - .../files/arch/mips/pci/ops-bcm96348.c | 278 - .../files/arch/mips/pci/pci-bcm96348.c | 62 - .../files/drivers/mtd/maps/bcm963xx-flash.c | 277 - .../files/drivers/serial/bcm63xx_cons.c | 1041 - .../brcm63xx-2.6/files/include/asm-mips/cfe.h | 189 - .../include/asm-mips/mach-bcm963xx/6338_intr.h | 64 - .../include/asm-mips/mach-bcm963xx/6338_map_part.h | 334 - .../include/asm-mips/mach-bcm963xx/6345_intr.h | 72 - .../include/asm-mips/mach-bcm963xx/6345_map_part.h | 163 - .../include/asm-mips/mach-bcm963xx/6348_intr.h | 74 - .../include/asm-mips/mach-bcm963xx/6348_map_part.h | 500 - .../files/include/asm-mips/mach-bcm963xx/bcmTag.h | 153 - .../include/asm-mips/mach-bcm963xx/bcm_intr.h | 59 - .../include/asm-mips/mach-bcm963xx/bcm_map_part.h | 34 - .../files/include/asm-mips/mach-bcm963xx/bcmpci.h | 87 - .../include/asm-mips/mach-bcm963xx/bcmtypes.h | 160 - .../files/include/asm-mips/mach-bcm963xx/board.h | 373 - .../include/asm-mips/mach-bcm963xx/bootloaders.h | 7 - .../asm-mips/mach-bcm963xx/cpu-feature-overrides.h | 36 - .../brcm63xx-2.6/files/include/linux/atmrt2684.h | 48 - target/linux/brcm63xx-2.6/image/Makefile | 48 - .../linux/brcm63xx-2.6/image/lzma-loader/Makefile | 34 - .../image/lzma-loader/src/LzmaDecode.c | 663 - .../image/lzma-loader/src/LzmaDecode.h | 100 - .../brcm63xx-2.6/image/lzma-loader/src/Makefile | 77 - .../brcm63xx-2.6/image/lzma-loader/src/README | 55 - .../image/lzma-loader/src/decompress.c | 175 - .../image/lzma-loader/src/decompress.lds.in | 20 - .../brcm63xx-2.6/image/lzma-loader/src/head.S | 155 - .../image/lzma-loader/src/loader.lds.in | 17 - .../linux/brcm63xx-2.6/patches/001-bcm963xx.patch | 222 - .../brcm63xx-2.6/patches/002-bcm963xx_serial.patch | 8 - .../patches/040-bcm963xx_flashmap.patch | 63 - .../linux/brcm63xx-2.6/patches/100-atm_hacks.patch | 186 - .../linux/brcm63xx-2.6/patches/150-sst_flash.patch | 36 - target/linux/brcm63xx-2.6/profiles/Atheros.mk | 17 - target/linux/brcm63xx-2.6/profiles/Broadcom.mk | 17 - target/linux/brcm63xx-2.6/profiles/Ralink.mk | 13 - target/linux/brcm63xx/Makefile | 26 + target/linux/brcm63xx/config/default | 352 + .../brcm63xx/files/arch/mips/bcm963xx/Makefile | 9 + .../linux/brcm63xx/files/arch/mips/bcm963xx/info.c | 102 + .../files/arch/mips/bcm963xx/int-handler.S | 59 + .../linux/brcm63xx/files/arch/mips/bcm963xx/irq.c | 258 + .../linux/brcm63xx/files/arch/mips/bcm963xx/prom.c | 73 + .../brcm63xx/files/arch/mips/bcm963xx/ser_init.c | 181 + .../brcm63xx/files/arch/mips/bcm963xx/setup.c | 472 + .../linux/brcm63xx/files/arch/mips/bcm963xx/time.c | 116 + .../linux/brcm63xx/files/arch/mips/bcm963xx/wdt.c | 246 + target/linux/brcm63xx/files/arch/mips/cfe/Makefile | 5 + target/linux/brcm63xx/files/arch/mips/cfe/cfe.c | 533 + .../brcm63xx/files/arch/mips/cfe/cfe_private.h | 176 + .../brcm63xx/files/arch/mips/pci/fixup-bcm96348.c | 95 + .../brcm63xx/files/arch/mips/pci/ops-bcm96348.c | 278 + .../brcm63xx/files/arch/mips/pci/pci-bcm96348.c | 62 + .../files/drivers/mtd/maps/bcm963xx-flash.c | 277 + .../brcm63xx/files/drivers/serial/bcm63xx_cons.c | 1041 + target/linux/brcm63xx/files/include/asm-mips/cfe.h | 189 + .../include/asm-mips/mach-bcm963xx/6338_intr.h | 64 + .../include/asm-mips/mach-bcm963xx/6338_map_part.h | 334 + .../include/asm-mips/mach-bcm963xx/6345_intr.h | 72 + .../include/asm-mips/mach-bcm963xx/6345_map_part.h | 163 + .../include/asm-mips/mach-bcm963xx/6348_intr.h | 74 + .../include/asm-mips/mach-bcm963xx/6348_map_part.h | 500 + .../files/include/asm-mips/mach-bcm963xx/bcmTag.h | 153 + .../include/asm-mips/mach-bcm963xx/bcm_intr.h | 59 + .../include/asm-mips/mach-bcm963xx/bcm_map_part.h | 34 + .../files/include/asm-mips/mach-bcm963xx/bcmpci.h | 87 + .../include/asm-mips/mach-bcm963xx/bcmtypes.h | 160 + .../files/include/asm-mips/mach-bcm963xx/board.h | 373 + .../include/asm-mips/mach-bcm963xx/bootloaders.h | 7 + .../asm-mips/mach-bcm963xx/cpu-feature-overrides.h | 36 + .../linux/brcm63xx/files/include/linux/atmrt2684.h | 48 + target/linux/brcm63xx/image/Makefile | 48 + target/linux/brcm63xx/image/lzma-loader/Makefile | 34 + .../brcm63xx/image/lzma-loader/src/LzmaDecode.c | 663 + .../brcm63xx/image/lzma-loader/src/LzmaDecode.h | 100 + .../linux/brcm63xx/image/lzma-loader/src/Makefile | 77 + target/linux/brcm63xx/image/lzma-loader/src/README | 55 + .../brcm63xx/image/lzma-loader/src/decompress.c | 175 + .../image/lzma-loader/src/decompress.lds.in | 20 + target/linux/brcm63xx/image/lzma-loader/src/head.S | 155 + .../brcm63xx/image/lzma-loader/src/loader.lds.in | 17 + target/linux/brcm63xx/patches/001-bcm963xx.patch | 222 + .../brcm63xx/patches/002-bcm963xx_serial.patch | 8 + .../brcm63xx/patches/040-bcm963xx_flashmap.patch | 63 + target/linux/brcm63xx/patches/100-atm_hacks.patch | 186 + target/linux/brcm63xx/patches/150-sst_flash.patch | 36 + target/linux/brcm63xx/profiles/Atheros.mk | 17 + target/linux/brcm63xx/profiles/Broadcom.mk | 17 + target/linux/brcm63xx/profiles/Ralink.mk | 13 + target/linux/etrax-2.6/Makefile | 44 - target/linux/etrax-2.6/base-files.mk | 5 - .../base-files/default/etc/config/network | 15 - .../etrax-2.6/base-files/default/etc/ipkg.conf | 3 - .../linux/etrax-2.6/base-files/default/etc/passwd | 2 - target/linux/etrax-2.6/config/default | 237 - target/linux/etrax-2.6/config/profile-vhdl_no_fb | 0 .../arch/cris/arch-v10/drivers/gpio_syscalls.c | 191 - .../etrax-2.6/files/drivers/spi/spi_crisv32_gpio.c | 262 - .../etrax-2.6/files/drivers/spi/spi_crisv32_sser.c | 1566 -- .../etrax-2.6/files/drivers/usb/host/hc-cris-dbg.h | 141 - .../etrax-2.6/files/include/linux/mtd/mtdram.h | 10 - target/linux/etrax-2.6/image/Config.in | 5 - target/linux/etrax-2.6/image/Makefile | 55 - target/linux/etrax-2.6/image/boot_linux | 512 - target/linux/etrax-2.6/image/e100boot/Makefile | 34 - target/linux/etrax-2.6/image/mkfimage/Makefile | 30 - target/linux/etrax-2.6/image/mkfimage/src/Makefile | 4 - .../linux/etrax-2.6/image/mkfimage/src/mkfimage.c | 72 - .../etrax-2.6/patches/cris/001-include-cris.patch | 4551 ---- .../etrax-2.6/patches/cris/002-arch-cris.patch | 24914 ------------------- .../etrax-2.6/patches/cris/003-drivers-cris.patch | 22601 ----------------- .../patches/cris/004-kernel-Kconfig.sched.patch | 21 - .../linux/etrax-2.6/patches/cris/005-loader.patch | 60 - .../linux/etrax-2.6/patches/cris/006-gcc-4.patch | 705 - .../etrax-2.6/patches/cris/007-nr_free_pages.patch | 12 - .../etrax-2.6/patches/cris/008-flashmap.patch | 41 - .../etrax-2.6/patches/cris/008a-flashmap.patch | 33 - .../linux/etrax-2.6/patches/cris/009-sysfs.patch | 83 - .../patches/cris/010-multi-target-build.patch | 1973 -- target/linux/etrax-2.6/patches/cris/011-debug-port | 26 - .../linux/etrax-2.6/patches/cris/012-splash.patch | 22 - .../patches/cris/013-crisdriver-sysfs.patch | 180 - .../patches/cris/014-partition-tables.patch | 102 - .../patches/cris/015-samsung-flash-chip.patch | 13 - .../patches/cris/016-auto-detect-ram.patch | 101 - .../etrax-2.6/patches/cris/017-uclibc-swab.patch | 50 - .../linux/etrax-2.6/patches/cris/018-reboot.patch | 10 - .../etrax-2.6/patches/cris/020-syscalls.patch | 166 - .../patches/generic_2.6/001-squashfs.patch | 4170 ---- .../patches/generic_2.6/002-lzma_decompress.patch | 780 - .../patches/generic_2.6/003-squashfs_lzma.patch | 109 - .../generic_2.6/004-extra_optimization.patch | 13 - .../patches/generic_2.6/006-gcc4_inline_fix.patch | 12 - .../patches/generic_2.6/007-samsung_flash.patch | 37 - .../009-revert_intel_flash_breakage.patch | 169 - .../010-disable_old_squashfs_compatibility.patch | 21 - .../patches/generic_2.6/060-rootfs_split.patch | 414 - .../patches/generic_2.6/065-block2mtd_init.patch | 112 - .../generic_2.6/100-netfilter_layer7_2.8.patch | 2053 -- .../101-netfilter_layer7_pktmatch.patch | 108 - .../patches/generic_2.6/110-ipp2p_0.8.1rc1.patch | 948 - .../120-openswan-2.4.0.kernel-2.6-natt.patch | 171 - .../patches/generic_2.6/130-netfilter-ipset.patch | 5851 ----- .../patches/generic_2.6/140-netfilter_time.patch | 241 - .../patches/generic_2.6/150-netfilter_imq.patch | 892 - .../patches/generic_2.6/160-netfilter_route.patch | 902 - .../generic_2.6/170-netfilter_chaostables.patch | 880 - .../patches/generic_2.6/200-sched_esfq.patch | 730 - .../201-multiple_default_gateways.patch | 1243 - .../patches/generic_2.6/204-jffs2_eofdetect.patch | 58 - .../patches/generic_2.6/208-rtl8110sb_fix.patch | 25 - .../patches/generic_2.6/209-mini_fo.patch | 7807 ------ .../patches/generic_2.6/210-d80211_compat.patch | 11 - .../generic_2.6/211-no_block2mtd_readahead.patch | 11 - .../generic_2.6/212-block2mtd_erase_scan.patch | 11 - .../etrax-2.6/patches/generic_2.6/510-Yaffs.patch | 13085 ---------- .../patches/generic_2.6/700-airprime.patch | 12 - .../generic_2.6/900-headers_type_and_time.patch | 48 - .../generic_2.6/901-asm_bitops_include.patch | 11 - .../generic_2.6/902-darwin_scripts_include.patch | 145 - .../patches/generic_2.6/903-stddef_include.patch | 17 - .../patches/generic_2.6/904-ls_time_locale.patch | 24 - .../patches/generic_2.6/905-zydas-zyxel.patch | 18 - target/linux/etrax-2.6/profiles/100-generic.mk | 16 - target/linux/etrax-2.6/profiles/101-vhdl-nofb.mk | 17 - target/linux/etrax/Makefile | 44 + target/linux/etrax/base-files.mk | 5 + .../etrax/base-files/default/etc/config/network | 15 + .../linux/etrax/base-files/default/etc/ipkg.conf | 3 + target/linux/etrax/base-files/default/etc/passwd | 2 + target/linux/etrax/config/default | 237 + target/linux/etrax/config/profile-vhdl_no_fb | 0 .../arch/cris/arch-v10/drivers/gpio_syscalls.c | 191 + .../etrax/files/drivers/spi/spi_crisv32_gpio.c | 262 + .../etrax/files/drivers/spi/spi_crisv32_sser.c | 1566 ++ .../etrax/files/drivers/usb/host/hc-cris-dbg.h | 141 + .../linux/etrax/files/include/linux/mtd/mtdram.h | 10 + target/linux/etrax/image/Config.in | 5 + target/linux/etrax/image/Makefile | 55 + target/linux/etrax/image/boot_linux | 512 + target/linux/etrax/image/e100boot/Makefile | 34 + target/linux/etrax/image/mkfimage/Makefile | 30 + target/linux/etrax/image/mkfimage/src/Makefile | 4 + target/linux/etrax/image/mkfimage/src/mkfimage.c | 72 + .../etrax/patches/cris/001-include-cris.patch | 4551 ++++ .../linux/etrax/patches/cris/002-arch-cris.patch | 24914 +++++++++++++++++++ .../etrax/patches/cris/003-drivers-cris.patch | 22601 +++++++++++++++++ .../patches/cris/004-kernel-Kconfig.sched.patch | 21 + target/linux/etrax/patches/cris/005-loader.patch | 60 + target/linux/etrax/patches/cris/006-gcc-4.patch | 705 + .../etrax/patches/cris/007-nr_free_pages.patch | 12 + target/linux/etrax/patches/cris/008-flashmap.patch | 41 + .../linux/etrax/patches/cris/008a-flashmap.patch | 33 + target/linux/etrax/patches/cris/009-sysfs.patch | 83 + .../patches/cris/010-multi-target-build.patch | 1973 ++ target/linux/etrax/patches/cris/011-debug-port | 26 + target/linux/etrax/patches/cris/012-splash.patch | 22 + .../etrax/patches/cris/013-crisdriver-sysfs.patch | 180 + .../etrax/patches/cris/014-partition-tables.patch | 102 + .../patches/cris/015-samsung-flash-chip.patch | 13 + .../etrax/patches/cris/016-auto-detect-ram.patch | 101 + .../linux/etrax/patches/cris/017-uclibc-swab.patch | 50 + target/linux/etrax/patches/cris/018-reboot.patch | 10 + target/linux/etrax/patches/cris/020-syscalls.patch | 166 + .../etrax/patches/generic_2.6/001-squashfs.patch | 4170 ++++ .../patches/generic_2.6/002-lzma_decompress.patch | 780 + .../patches/generic_2.6/003-squashfs_lzma.patch | 109 + .../generic_2.6/004-extra_optimization.patch | 13 + .../patches/generic_2.6/006-gcc4_inline_fix.patch | 12 + .../patches/generic_2.6/007-samsung_flash.patch | 37 + .../009-revert_intel_flash_breakage.patch | 169 + .../010-disable_old_squashfs_compatibility.patch | 21 + .../patches/generic_2.6/060-rootfs_split.patch | 414 + .../patches/generic_2.6/065-block2mtd_init.patch | 112 + .../generic_2.6/100-netfilter_layer7_2.8.patch | 2053 ++ .../101-netfilter_layer7_pktmatch.patch | 108 + .../patches/generic_2.6/110-ipp2p_0.8.1rc1.patch | 948 + .../120-openswan-2.4.0.kernel-2.6-natt.patch | 171 + .../patches/generic_2.6/130-netfilter-ipset.patch | 5851 +++++ .../patches/generic_2.6/140-netfilter_time.patch | 241 + .../patches/generic_2.6/150-netfilter_imq.patch | 892 + .../patches/generic_2.6/160-netfilter_route.patch | 902 + .../generic_2.6/170-netfilter_chaostables.patch | 880 + .../etrax/patches/generic_2.6/200-sched_esfq.patch | 730 + .../201-multiple_default_gateways.patch | 1243 + .../patches/generic_2.6/204-jffs2_eofdetect.patch | 58 + .../patches/generic_2.6/208-rtl8110sb_fix.patch | 25 + .../etrax/patches/generic_2.6/209-mini_fo.patch | 7807 ++++++ .../patches/generic_2.6/210-d80211_compat.patch | 11 + .../generic_2.6/211-no_block2mtd_readahead.patch | 11 + .../generic_2.6/212-block2mtd_erase_scan.patch | 11 + .../etrax/patches/generic_2.6/510-Yaffs.patch | 13085 ++++++++++ .../etrax/patches/generic_2.6/700-airprime.patch | 12 + .../generic_2.6/900-headers_type_and_time.patch | 48 + .../generic_2.6/901-asm_bitops_include.patch | 11 + .../generic_2.6/902-darwin_scripts_include.patch | 145 + .../patches/generic_2.6/903-stddef_include.patch | 17 + .../patches/generic_2.6/904-ls_time_locale.patch | 24 + .../patches/generic_2.6/905-zydas-zyxel.patch | 18 + target/linux/etrax/profiles/100-generic.mk | 16 + target/linux/etrax/profiles/101-vhdl-nofb.mk | 17 + target/linux/iop32x-2.6/Makefile | 24 - .../base-files/default/etc/config/network | 11 - target/linux/iop32x-2.6/config/default | 471 - target/linux/iop32x-2.6/image/Makefile | 41 - target/linux/iop32x/Makefile | 24 + .../iop32x/base-files/default/etc/config/network | 11 + target/linux/iop32x/config/default | 471 + target/linux/iop32x/image/Makefile | 41 + target/linux/ixp4xx-2.6/Makefile | 24 - .../base-files/default/etc/config/network | 13 - target/linux/ixp4xx-2.6/config/default | 492 - target/linux/ixp4xx-2.6/config/profile-FSG3 | 21 - target/linux/ixp4xx-2.6/image/Config.in | 10 - target/linux/ixp4xx-2.6/image/Makefile | 85 - target/linux/ixp4xx-2.6/image/apex/Makefile | 40 - .../patches/100-slugos-nslu2-armeb_config.patch | 20 - target/linux/ixp4xx-2.6/image/npe-ucode/Makefile | 40 - .../image/npe-ucode/src/IxNpeMicrocode.h | 143 - .../patches/050-dsmg600_upstream_support.patch | 551 - .../ixp4xx-2.6/patches/070-ixp4xx_freq_fixup.patch | 131 - .../080-trivial_nslu2_nas100d_cleanup.patch | 196 - .../linux/ixp4xx-2.6/patches/100-npe_driver.patch | 4881 ---- .../110-ixp4xx_net_driver_fix_mac_handling.patch | 17 - .../139-ixp4xx_net_driver_mtd_load_fw.patch | 392 - .../patches/140-ixp4xx_net_driver_no_phy.patch | 73 - .../ixp4xx-2.6/patches/141-nslu2_setup_mac.patch | 42 - .../ixp4xx-2.6/patches/142-nas100d_setup_mac.patch | 41 - .../patches/143-nslu2_mtd_microcode.patch | 35 - .../patches/144-nas100d_mtd_microcode.patch | 34 - .../patches/152-nas100d_mtd_load_mac.patch | 56 - .../patches/153-nslu2_mtd_load_mac.patch | 56 - .../patches/160-nas100d_artop_temp_fix.patch | 49 - .../patches/178-via_velocity_bigendian.patch | 927 - .../ixp4xx-2.6/patches/185-nslu2_rtc_fixup.patch | 54 - .../ixp4xx-2.6/patches/186-nas100d_rtc_fixup.patch | 55 - .../ixp4xx-2.6/patches/187-dsmg600_rtc_fixup.patch | 57 - .../ixp4xx-2.6/patches/200-gateway_7001.patch | 250 - .../patches/210-gateway_7001_setup_mac.patch | 62 - .../patches/212-gateway_7001_mtd_microcode.patch | 67 - target/linux/ixp4xx-2.6/patches/300-wg302v2.patch | 231 - .../ixp4xx-2.6/patches/310-wg302v2_setup_mac.patch | 37 - .../ixp4xx-2.6/patches/400-pronghorn_metro.patch | 251 - .../patches/410-pronghorn_metro_setup_mac.patch | 61 - .../420-pronghorn_metro_mtd_microcode.patch | 55 - .../patches/430-pronghorn_metro_cf.patch | 57 - target/linux/ixp4xx-2.6/patches/500-compex.patch | 184 - .../ixp4xx-2.6/patches/510-compex_setup_mac.patch | 62 - .../patches/520-compex_mtd_microcode.patch | 55 - .../linux/ixp4xx-2.6/patches/600-wrt300nv2.patch | 229 - .../patches/610-wrt300nv2_setup_mac.patch | 62 - .../ixp4xx-2.6/patches/720-avila_setup_mac.patch | 70 - .../patches/740-avila_loft_mac_platform.patch | 50 - .../patches/750-avila_mtd_microcode.patch | 28 - .../patches/800-eeprom_new_notifier.patch | 201 - .../patches/900-no_loader_workaround.patch | 19 - .../ixp4xx-2.6/patches/996-fsg3_support.patch | 429 - target/linux/ixp4xx-2.6/profiles/100-Default.mk | 17 - target/linux/ixp4xx-2.6/profiles/200-NSLU2.mk | 20 - target/linux/ixp4xx-2.6/profiles/300-NAS100d.mk | 21 - .../linux/ixp4xx-2.6/profiles/400-DSMG600RevA.mk | 21 - target/linux/ixp4xx-2.6/profiles/500-FSG3.mk | 20 - target/linux/ixp4xx/Makefile | 24 + .../ixp4xx/base-files/default/etc/config/network | 13 + target/linux/ixp4xx/config/default | 492 + target/linux/ixp4xx/config/profile-FSG3 | 21 + target/linux/ixp4xx/image/Config.in | 10 + target/linux/ixp4xx/image/Makefile | 85 + target/linux/ixp4xx/image/apex/Makefile | 40 + .../patches/100-slugos-nslu2-armeb_config.patch | 20 + target/linux/ixp4xx/image/npe-ucode/Makefile | 40 + .../ixp4xx/image/npe-ucode/src/IxNpeMicrocode.h | 143 + .../patches/050-dsmg600_upstream_support.patch | 551 + .../ixp4xx/patches/070-ixp4xx_freq_fixup.patch | 131 + .../080-trivial_nslu2_nas100d_cleanup.patch | 196 + target/linux/ixp4xx/patches/100-npe_driver.patch | 4881 ++++ .../110-ixp4xx_net_driver_fix_mac_handling.patch | 17 + .../139-ixp4xx_net_driver_mtd_load_fw.patch | 392 + .../patches/140-ixp4xx_net_driver_no_phy.patch | 73 + .../linux/ixp4xx/patches/141-nslu2_setup_mac.patch | 42 + .../ixp4xx/patches/142-nas100d_setup_mac.patch | 41 + .../ixp4xx/patches/143-nslu2_mtd_microcode.patch | 35 + .../ixp4xx/patches/144-nas100d_mtd_microcode.patch | 34 + .../ixp4xx/patches/152-nas100d_mtd_load_mac.patch | 56 + .../ixp4xx/patches/153-nslu2_mtd_load_mac.patch | 56 + .../patches/160-nas100d_artop_temp_fix.patch | 49 + .../patches/178-via_velocity_bigendian.patch | 927 + .../linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch | 54 + .../ixp4xx/patches/186-nas100d_rtc_fixup.patch | 55 + .../ixp4xx/patches/187-dsmg600_rtc_fixup.patch | 57 + target/linux/ixp4xx/patches/200-gateway_7001.patch | 250 + .../patches/210-gateway_7001_setup_mac.patch | 62 + .../patches/212-gateway_7001_mtd_microcode.patch | 67 + target/linux/ixp4xx/patches/300-wg302v2.patch | 231 + .../ixp4xx/patches/310-wg302v2_setup_mac.patch | 37 + .../linux/ixp4xx/patches/400-pronghorn_metro.patch | 251 + .../patches/410-pronghorn_metro_setup_mac.patch | 61 + .../420-pronghorn_metro_mtd_microcode.patch | 55 + .../ixp4xx/patches/430-pronghorn_metro_cf.patch | 57 + target/linux/ixp4xx/patches/500-compex.patch | 184 + .../ixp4xx/patches/510-compex_setup_mac.patch | 62 + .../ixp4xx/patches/520-compex_mtd_microcode.patch | 55 + target/linux/ixp4xx/patches/600-wrt300nv2.patch | 229 + .../ixp4xx/patches/610-wrt300nv2_setup_mac.patch | 62 + .../linux/ixp4xx/patches/720-avila_setup_mac.patch | 70 + .../patches/740-avila_loft_mac_platform.patch | 50 + .../ixp4xx/patches/750-avila_mtd_microcode.patch | 28 + .../ixp4xx/patches/800-eeprom_new_notifier.patch | 201 + .../ixp4xx/patches/900-no_loader_workaround.patch | 19 + target/linux/ixp4xx/patches/996-fsg3_support.patch | 429 + target/linux/ixp4xx/profiles/100-Default.mk | 17 + target/linux/ixp4xx/profiles/200-NSLU2.mk | 20 + target/linux/ixp4xx/profiles/300-NAS100d.mk | 21 + target/linux/ixp4xx/profiles/400-DSMG600RevA.mk | 21 + target/linux/ixp4xx/profiles/500-FSG3.mk | 20 + target/linux/magicbox-2.6/Makefile | 21 - target/linux/magicbox-2.6/config/default | 174 - .../files/arch/ppc/platforms/4xx/magicbox.c | 297 - .../files/arch/ppc/platforms/4xx/magicbox.h | 46 - .../files/drivers/ide/ppc/magicbox_ide.c | 152 - target/linux/magicbox-2.6/image/Makefile | 37 - .../patches-2.6.22/001-magicbox_support.patch | 71 - .../magicbox-2.6/patches-2.6.22/100-cf_slot.patch | 53 - target/linux/magicbox/Makefile | 21 + target/linux/magicbox/config/default | 174 + .../files/arch/ppc/platforms/4xx/magicbox.c | 297 + .../files/arch/ppc/platforms/4xx/magicbox.h | 46 + .../magicbox/files/drivers/ide/ppc/magicbox_ide.c | 152 + target/linux/magicbox/image/Makefile | 37 + .../patches-2.6.22/001-magicbox_support.patch | 71 + .../magicbox/patches-2.6.22/100-cf_slot.patch | 53 + target/linux/pxa-2.6/Makefile | 25 - target/linux/pxa-2.6/config/default | 390 - target/linux/pxa-2.6/image | 1 - target/linux/pxa-2.6/patches/000-cpufreq.patch | 533 - target/linux/pxa-2.6/patches/001-pm.patch | 869 - target/linux/pxa-2.6/patches/002-usb_gadget.patch | 58 - target/linux/pxa-2.6/patches/004-skbuf_hack.patch | 10 - target/linux/pxa-2.6/patches/005-mtd.patch | 111 - target/linux/pxa/Makefile | 25 + target/linux/pxa/config/default | 390 + target/linux/pxa/image | 1 + target/linux/pxa/patches/000-cpufreq.patch | 533 + target/linux/pxa/patches/001-pm.patch | 869 + target/linux/pxa/patches/002-usb_gadget.patch | 58 + target/linux/pxa/patches/004-skbuf_hack.patch | 10 + target/linux/pxa/patches/005-mtd.patch | 111 + target/linux/rb532-2.6/Makefile | 21 - target/linux/rb532-2.6/base-files.mk | 11 - .../base-files/default/etc/config/network | 12 - .../linux/rb532-2.6/base-files/default/etc/diag.sh | 19 - .../rb532-2.6/base-files/default/sbin/cf2nand | 62 - .../rb532-2.6/base-files/default/sbin/wget2nand | 65 - target/linux/rb532-2.6/config/default | 194 - .../rb532-2.6/files/arch/mips/pci/fixup-rb500.c | 49 - .../rb532-2.6/files/arch/mips/pci/ops-rc32434.c | 218 - .../rb532-2.6/files/arch/mips/pci/pci-rc32434.c | 234 - .../linux/rb532-2.6/files/arch/mips/rb500/Makefile | 5 - .../rb532-2.6/files/arch/mips/rb500/devices.c | 218 - target/linux/rb532-2.6/files/arch/mips/rb500/irq.c | 264 - .../linux/rb532-2.6/files/arch/mips/rb500/misc.c | 56 - .../linux/rb532-2.6/files/arch/mips/rb500/prom.c | 165 - .../linux/rb532-2.6/files/arch/mips/rb500/serial.c | 77 - .../linux/rb532-2.6/files/arch/mips/rb500/setup.c | 81 - .../linux/rb532-2.6/files/arch/mips/rb500/time.c | 94 - .../rb532-2.6/files/drivers/block/rb500/Makefile | 3 - .../rb532-2.6/files/drivers/block/rb500/ata.c | 485 - .../rb532-2.6/files/drivers/block/rb500/ata.h | 143 - .../rb532-2.6/files/drivers/block/rb500/bdev.c | 339 - .../rb532-2.6/files/drivers/leds/leds-rb500.c | 81 - .../rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c | 219 - target/linux/rb532-2.6/files/drivers/net/korina.c | 1166 - .../rb532-2.6/files/drivers/net/rc32434_eth.h | 178 - .../rb532-2.6/files/include/asm-mips/rc32434/ddr.h | 173 - .../rb532-2.6/files/include/asm-mips/rc32434/dma.h | 168 - .../files/include/asm-mips/rc32434/dma_v.h | 72 - .../rb532-2.6/files/include/asm-mips/rc32434/eth.h | 320 - .../files/include/asm-mips/rc32434/eth_v.h | 63 - .../files/include/asm-mips/rc32434/gpio.h | 181 - .../rb532-2.6/files/include/asm-mips/rc32434/irq.h | 7 - .../rb532-2.6/files/include/asm-mips/rc32434/pci.h | 692 - .../rb532-2.6/files/include/asm-mips/rc32434/rb.h | 84 - .../files/include/asm-mips/rc32434/rc32434.h | 122 - target/linux/rb532-2.6/image/Makefile | 72 - target/linux/rb532-2.6/image/gen_image.sh | 17 - .../rb532-2.6/patches/100-rb5xx_support.patch | 94 - .../rb532-2.6/patches/110-korina_ethernet.patch | 30 - target/linux/rb532-2.6/patches/120-cf.patch | 26 - .../linux/rb532-2.6/patches/140-cmdline_hack.patch | 14 - .../patches/200-bridge_resource_hack.patch | 13 - .../linux/rb532-2.6/patches/220-serial_fix.patch | 18 - .../patches/240-via_rhine_performance.patch | 94 - target/linux/rb532-2.6/patches/500-Nand.patch | 29 - target/linux/rb532-2.6/patches/510-rb500_led.patch | 29 - target/linux/rb532-2.6/src/patch-cmdline.c | 80 - target/linux/rb532/Makefile | 21 + target/linux/rb532/base-files.mk | 11 + .../rb532/base-files/default/etc/config/network | 12 + target/linux/rb532/base-files/default/etc/diag.sh | 19 + target/linux/rb532/base-files/default/sbin/cf2nand | 62 + .../linux/rb532/base-files/default/sbin/wget2nand | 65 + target/linux/rb532/config/default | 194 + .../linux/rb532/files/arch/mips/pci/fixup-rb500.c | 49 + .../linux/rb532/files/arch/mips/pci/ops-rc32434.c | 218 + .../linux/rb532/files/arch/mips/pci/pci-rc32434.c | 234 + target/linux/rb532/files/arch/mips/rb500/Makefile | 5 + target/linux/rb532/files/arch/mips/rb500/devices.c | 218 + target/linux/rb532/files/arch/mips/rb500/irq.c | 264 + target/linux/rb532/files/arch/mips/rb500/misc.c | 56 + target/linux/rb532/files/arch/mips/rb500/prom.c | 165 + target/linux/rb532/files/arch/mips/rb500/serial.c | 77 + target/linux/rb532/files/arch/mips/rb500/setup.c | 81 + target/linux/rb532/files/arch/mips/rb500/time.c | 94 + .../linux/rb532/files/drivers/block/rb500/Makefile | 3 + target/linux/rb532/files/drivers/block/rb500/ata.c | 485 + target/linux/rb532/files/drivers/block/rb500/ata.h | 143 + .../linux/rb532/files/drivers/block/rb500/bdev.c | 339 + target/linux/rb532/files/drivers/leds/leds-rb500.c | 81 + .../rb532/files/drivers/mtd/nand/rbmipsnand.c | 219 + target/linux/rb532/files/drivers/net/korina.c | 1166 + target/linux/rb532/files/drivers/net/rc32434_eth.h | 178 + .../rb532/files/include/asm-mips/rc32434/ddr.h | 173 + .../rb532/files/include/asm-mips/rc32434/dma.h | 168 + .../rb532/files/include/asm-mips/rc32434/dma_v.h | 72 + .../rb532/files/include/asm-mips/rc32434/eth.h | 320 + .../rb532/files/include/asm-mips/rc32434/eth_v.h | 63 + .../rb532/files/include/asm-mips/rc32434/gpio.h | 181 + .../rb532/files/include/asm-mips/rc32434/irq.h | 7 + .../rb532/files/include/asm-mips/rc32434/pci.h | 692 + .../rb532/files/include/asm-mips/rc32434/rb.h | 84 + .../rb532/files/include/asm-mips/rc32434/rc32434.h | 122 + target/linux/rb532/image/Makefile | 72 + target/linux/rb532/image/gen_image.sh | 17 + target/linux/rb532/patches/100-rb5xx_support.patch | 94 + .../linux/rb532/patches/110-korina_ethernet.patch | 30 + target/linux/rb532/patches/120-cf.patch | 26 + target/linux/rb532/patches/140-cmdline_hack.patch | 14 + .../rb532/patches/200-bridge_resource_hack.patch | 13 + target/linux/rb532/patches/220-serial_fix.patch | 18 + .../rb532/patches/240-via_rhine_performance.patch | 94 + target/linux/rb532/patches/500-Nand.patch | 29 + target/linux/rb532/patches/510-rb500_led.patch | 29 + target/linux/rb532/src/patch-cmdline.c | 80 + target/linux/rdc-2.6/Makefile | 38 - .../linux/rdc-2.6/base-files/default/etc/diag.sh | 19 - target/linux/rdc-2.6/config/default | 313 - target/linux/rdc-2.6/config/profile-wl153 | 2 - .../linux/rdc-2.6/files/arch/i386/kernel/cpu/rdc.c | 24 - .../rdc-2.6/files/arch/i386/mach-rdc/Makefile | 5 - .../linux/rdc-2.6/files/arch/i386/mach-rdc/gpio.c | 91 - .../rdc-2.6/files/arch/i386/mach-rdc/platform.c | 83 - .../linux/rdc-2.6/files/arch/i386/mach-rdc/wdt.c | 272 - .../rdc-2.6/files/drivers/leds/leds-rdc3211.c | 71 - .../linux/rdc-2.6/files/drivers/mtd/maps/imghdr.h | 25 - .../linux/rdc-2.6/files/drivers/mtd/maps/rdc3210.c | 379 - target/linux/rdc-2.6/files/drivers/net/r6040.c | 1041 - target/linux/rdc-2.6/files/include/asm-i386/gpio.h | 6 - .../files/include/asm-i386/mach-generic/gpio.h | 15 - .../rdc-2.6/files/include/asm-i386/mach-rdc/gpio.h | 56 - .../files/include/asm-i386/mach-rdc/rdc321x_defs.h | 6 - target/linux/rdc-2.6/image/Makefile | 49 - target/linux/rdc-2.6/patches/000-rdc_fixes.patch | 71 - .../rdc-2.6/patches/001-rdc3210_flash_map.patch | 65 - .../linux/rdc-2.6/patches/002-r6040_ethernet.patch | 39 - target/linux/rdc-2.6/patches/003-rootfstype.patch | 11 - .../linux/rdc-2.6/patches/004-rdc3211_leds.patch | 27 - .../rdc-2.6/patches/005-rdc_x86_cpu_type.patch | 22 - target/linux/rdc-2.6/patches/600-x86_lzma.patch | 1042 - target/linux/rdc-2.6/profiles/AR525W.mk | 13 - target/linux/rdc-2.6/profiles/WL-153.mk | 13 - target/linux/rdc/Makefile | 38 + target/linux/rdc/base-files/default/etc/diag.sh | 19 + target/linux/rdc/config/default | 313 + target/linux/rdc/config/profile-wl153 | 2 + target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c | 24 + target/linux/rdc/files/arch/i386/mach-rdc/Makefile | 5 + target/linux/rdc/files/arch/i386/mach-rdc/gpio.c | 91 + .../linux/rdc/files/arch/i386/mach-rdc/platform.c | 83 + target/linux/rdc/files/arch/i386/mach-rdc/wdt.c | 272 + target/linux/rdc/files/drivers/leds/leds-rdc3211.c | 71 + target/linux/rdc/files/drivers/mtd/maps/imghdr.h | 25 + target/linux/rdc/files/drivers/mtd/maps/rdc3210.c | 379 + target/linux/rdc/files/drivers/net/r6040.c | 1041 + target/linux/rdc/files/include/asm-i386/gpio.h | 6 + .../rdc/files/include/asm-i386/mach-generic/gpio.h | 15 + .../rdc/files/include/asm-i386/mach-rdc/gpio.h | 56 + .../files/include/asm-i386/mach-rdc/rdc321x_defs.h | 6 + target/linux/rdc/image/Makefile | 49 + target/linux/rdc/patches/000-rdc_fixes.patch | 71 + .../linux/rdc/patches/001-rdc3210_flash_map.patch | 65 + target/linux/rdc/patches/002-r6040_ethernet.patch | 39 + target/linux/rdc/patches/003-rootfstype.patch | 11 + target/linux/rdc/patches/004-rdc3211_leds.patch | 27 + .../linux/rdc/patches/005-rdc_x86_cpu_type.patch | 22 + target/linux/rdc/patches/600-x86_lzma.patch | 1042 + target/linux/rdc/profiles/AR525W.mk | 13 + target/linux/rdc/profiles/WL-153.mk | 13 + target/linux/sibyte-2.6/Makefile | 21 - .../base-files/default/etc/config/network | 14 - .../sibyte-2.6/base-files/default/etc/inittab | 5 - target/linux/sibyte-2.6/config/default | 319 - target/linux/sibyte-2.6/image/Makefile | 37 - target/linux/sibyte-2.6/patches/000-DUART.patch | 1025 - target/linux/sibyte/Makefile | 21 + .../sibyte/base-files/default/etc/config/network | 14 + target/linux/sibyte/base-files/default/etc/inittab | 5 + target/linux/sibyte/config/default | 319 + target/linux/sibyte/image/Makefile | 37 + target/linux/sibyte/patches/000-DUART.patch | 1025 + target/linux/uml-2.6/Makefile | 35 - target/linux/uml-2.6/README | 45 - target/linux/uml-2.6/config/i386 | 162 - target/linux/uml-2.6/config/x86_64 | 121 - target/linux/uml-2.6/image/Makefile | 19 - target/linux/uml/Makefile | 35 + target/linux/uml/README | 45 + target/linux/uml/config/i386 | 162 + target/linux/uml/config/x86_64 | 121 + target/linux/uml/image/Makefile | 19 + target/linux/x86-2.6/Makefile | 23 - .../x86-2.6/base-files/default/etc/preinit.arch | 2 - .../base-files/default/lib/upgrade/platform.sh | 27 - target/linux/x86-2.6/config/default | 417 - target/linux/x86-2.6/config/profile-Generic | 41 - target/linux/x86-2.6/config/profile-s100 | 521 - target/linux/x86-2.6/image/Config.in | 34 - target/linux/x86-2.6/image/Makefile | 88 - target/linux/x86-2.6/image/gen_image.sh | 45 - target/linux/x86-2.6/image/grub/Makefile | 73 - target/linux/x86-2.6/image/grub/menu.lst | 15 - .../x86-2.6/image/grub/patches/010-fixes-1.patch | 4490 ---- target/linux/x86-2.6/profiles/000-Generic.mk | 16 - target/linux/x86-2.6/profiles/Soekris.mk | 16 - target/linux/x86-2.6/profiles/s100.mk | 16 - target/linux/x86/Makefile | 23 + .../linux/x86/base-files/default/etc/preinit.arch | 2 + .../x86/base-files/default/lib/upgrade/platform.sh | 27 + target/linux/x86/config/default | 417 + target/linux/x86/config/profile-Generic | 41 + target/linux/x86/config/profile-s100 | 521 + target/linux/x86/image/Config.in | 34 + target/linux/x86/image/Makefile | 88 + target/linux/x86/image/gen_image.sh | 45 + target/linux/x86/image/grub/Makefile | 73 + target/linux/x86/image/grub/menu.lst | 15 + .../linux/x86/image/grub/patches/010-fixes-1.patch | 4490 ++++ target/linux/x86/profiles/000-Generic.mk | 16 + target/linux/x86/profiles/Soekris.mk | 16 + target/linux/x86/profiles/s100.mk | 16 + 1342 files changed, 258227 insertions(+), 258227 deletions(-) delete mode 100644 target/linux/adm5120-2.6/Makefile delete mode 100755 target/linux/adm5120-2.6/base-files/default/sbin/wget2nand delete mode 100644 target/linux/adm5120-2.6/config/default delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/Makefile delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/cellvision.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c delete mode 100644 target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c delete mode 100644 target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c delete mode 100755 target/linux/adm5120-2.6/files/drivers/leds/leds-gpio.c delete mode 100644 target/linux/adm5120-2.6/files/drivers/mtd/maps/adm5120-flash.c delete mode 100644 target/linux/adm5120-2.6/files/drivers/mtd/myloader.c delete mode 100644 target/linux/adm5120-2.6/files/drivers/mtd/nand/rbmipsnand.c delete mode 100644 target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c delete mode 100644 target/linux/adm5120-2.6/files/drivers/net/adm5120sw.h delete mode 100644 target/linux/adm5120-2.6/files/drivers/serial/adm5120_uart.c delete mode 100644 target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_board.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_irq.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_platform.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h delete mode 100755 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/asm/sizes.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/gpio.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/cfe.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/generic.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/myloader.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h delete mode 100644 target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/zynos.h delete mode 100644 target/linux/adm5120-2.6/files/include/linux/gpio_leds.h delete mode 100644 target/linux/adm5120-2.6/image/Makefile delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/Makefile delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.c delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.h delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/Makefile delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/README delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/board.c delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/config.h delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/head.S delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/printf.c delete mode 100644 target/linux/adm5120-2.6/image/lzma-loader/src/printf.h delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_nand.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_uart.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/100-mtd_myloder_partition_parser.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/200-amba_pl010_hacks.patch delete mode 100644 target/linux/adm5120-2.6/patches-2.6.22/201-amba_bus_hacks.patch delete mode 100644 target/linux/adm5120-2.6/profiles/100-Atheros.mk delete mode 100644 target/linux/adm5120-2.6/profiles/105-Texas.mk delete mode 100644 target/linux/adm5120-2.6/profiles/110-Ralink.mk delete mode 100644 target/linux/adm5120-2.6/profiles/200-None.mk delete mode 100644 target/linux/adm5120-2.6/profiles/Cellvision.mk delete mode 100644 target/linux/adm5120-2.6/profiles/RB1xx.mk create mode 100644 target/linux/adm5120/Makefile create mode 100755 target/linux/adm5120/base-files/default/sbin/wget2nand create mode 100644 target/linux/adm5120/config/default create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/Kconfig create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/Makefile create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/board.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/clock.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/gpio.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/irq.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/memory.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/platform.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/reset.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/setup.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/time.c create mode 100644 target/linux/adm5120/files/arch/mips/adm5120/trxsplit.c create mode 100644 target/linux/adm5120/files/arch/mips/pci/fixup-adm5120.c create mode 100644 target/linux/adm5120/files/arch/mips/pci/ops-adm5120.c create mode 100644 target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c create mode 100644 target/linux/adm5120/files/drivers/leds/leds-adm5120.c create mode 100755 target/linux/adm5120/files/drivers/leds/leds-gpio.c create mode 100644 target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c create mode 100644 target/linux/adm5120/files/drivers/mtd/myloader.c create mode 100644 target/linux/adm5120/files/drivers/mtd/nand/rbmipsnand.c create mode 100644 target/linux/adm5120/files/drivers/net/adm5120sw.c create mode 100644 target/linux/adm5120/files/drivers/net/adm5120sw.h create mode 100644 target/linux/adm5120/files/drivers/serial/adm5120_uart.c create mode 100644 target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h create mode 100755 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h create mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h create mode 100644 target/linux/adm5120/files/include/linux/gpio_leds.h create mode 100644 target/linux/adm5120/image/Makefile create mode 100644 target/linux/adm5120/image/lzma-loader/Makefile create mode 100644 target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c create mode 100644 target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h create mode 100644 target/linux/adm5120/image/lzma-loader/src/Makefile create mode 100644 target/linux/adm5120/image/lzma-loader/src/README create mode 100644 target/linux/adm5120/image/lzma-loader/src/board.c create mode 100644 target/linux/adm5120/image/lzma-loader/src/config.h create mode 100644 target/linux/adm5120/image/lzma-loader/src/decompress.c create mode 100644 target/linux/adm5120/image/lzma-loader/src/head.S create mode 100644 target/linux/adm5120/image/lzma-loader/src/loader.lds create mode 100644 target/linux/adm5120/image/lzma-loader/src/lzma-data.lds create mode 100644 target/linux/adm5120/image/lzma-loader/src/printf.c create mode 100644 target/linux/adm5120/image/lzma-loader/src/printf.h create mode 100644 target/linux/adm5120/patches-2.6.22/001-adm5120.patch create mode 100644 target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch create mode 100644 target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch create mode 100644 target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch create mode 100644 target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch create mode 100644 target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch create mode 100644 target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch create mode 100644 target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch create mode 100644 target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch create mode 100644 target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch create mode 100644 target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch create mode 100644 target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch create mode 100644 target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch create mode 100644 target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch create mode 100644 target/linux/adm5120/profiles/100-Atheros.mk create mode 100644 target/linux/adm5120/profiles/105-Texas.mk create mode 100644 target/linux/adm5120/profiles/110-Ralink.mk create mode 100644 target/linux/adm5120/profiles/200-None.mk create mode 100644 target/linux/adm5120/profiles/Cellvision.mk create mode 100644 target/linux/adm5120/profiles/RB1xx.mk delete mode 100644 target/linux/adm5120eb-2.6/Makefile delete mode 100644 target/linux/adm5120eb-2.6/config/default delete mode 120000 target/linux/adm5120eb-2.6/files delete mode 100644 target/linux/adm5120eb-2.6/image/Makefile delete mode 120000 target/linux/adm5120eb-2.6/image/lzma-loader delete mode 120000 target/linux/adm5120eb-2.6/patches-2.6.22 delete mode 100644 target/linux/adm5120eb-2.6/profiles/090-Zyxel.mk delete mode 100644 target/linux/adm5120eb-2.6/profiles/100-Texas.mk delete mode 100644 target/linux/adm5120eb-2.6/profiles/110-Atheros.mk delete mode 100644 target/linux/adm5120eb-2.6/profiles/110-None.mk create mode 100644 target/linux/adm5120eb/Makefile create mode 100644 target/linux/adm5120eb/config/default create mode 120000 target/linux/adm5120eb/files create mode 100644 target/linux/adm5120eb/image/Makefile create mode 120000 target/linux/adm5120eb/image/lzma-loader create mode 120000 target/linux/adm5120eb/patches-2.6.22 create mode 100644 target/linux/adm5120eb/profiles/090-Zyxel.mk create mode 100644 target/linux/adm5120eb/profiles/100-Texas.mk create mode 100644 target/linux/adm5120eb/profiles/110-Atheros.mk create mode 100644 target/linux/adm5120eb/profiles/110-None.mk delete mode 100644 target/linux/amazon-2.6/Makefile delete mode 100644 target/linux/amazon-2.6/base-files/default/etc/config/network delete mode 100644 target/linux/amazon-2.6/config/default delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/Kconfig delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/Makefile delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.c delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.h delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/interrupt.c delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/pci.c delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/prom.c delete mode 100644 target/linux/amazon-2.6/files/arch/mips/amazon/setup.c delete mode 100644 target/linux/amazon-2.6/files/drivers/atm/amazon_tpe.c delete mode 100644 target/linux/amazon-2.6/files/drivers/char/admmod.c delete mode 100644 target/linux/amazon-2.6/files/drivers/char/amazon_mei.c delete mode 100644 target/linux/amazon-2.6/files/drivers/char/ifx_ssc.c delete mode 100644 target/linux/amazon-2.6/files/drivers/char/watchdog/amazon_wdt.c delete mode 100644 target/linux/amazon-2.6/files/drivers/mtd/maps/amazon.c delete mode 100644 target/linux/amazon-2.6/files/drivers/net/amazon_sw.c delete mode 100644 target/linux/amazon-2.6/files/drivers/serial/amazon_asc.c delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/adm6996.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_dma.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_sw.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_tpe.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_wdt.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_defines.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_mib.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_peripheral_definitions.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc_defines.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/irq.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/model.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/port.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/amazon/serial.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/irq.h delete mode 100644 target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/mangle-port.h delete mode 100644 target/linux/amazon-2.6/image/Makefile delete mode 100644 target/linux/amazon-2.6/patches/017-wdt-driver.patch delete mode 100644 target/linux/amazon-2.6/patches/100-board.patch delete mode 100644 target/linux/amazon-2.6/patches/110-char_drivers.patch delete mode 100644 target/linux/amazon-2.6/patches/130-mtd_drivers.patch delete mode 100644 target/linux/amazon-2.6/patches/140-net_drivers.patch delete mode 100644 target/linux/amazon-2.6/patches/150-serial_driver.patch delete mode 100644 target/linux/amazon-2.6/patches/160-cfi-swap.patch create mode 100644 target/linux/amazon/Makefile create mode 100644 target/linux/amazon/base-files/default/etc/config/network create mode 100644 target/linux/amazon/config/default create mode 100644 target/linux/amazon/files/arch/mips/amazon/Kconfig create mode 100644 target/linux/amazon/files/arch/mips/amazon/Makefile create mode 100644 target/linux/amazon/files/arch/mips/amazon/dma-core.c create mode 100644 target/linux/amazon/files/arch/mips/amazon/dma-core.h create mode 100644 target/linux/amazon/files/arch/mips/amazon/interrupt.c create mode 100644 target/linux/amazon/files/arch/mips/amazon/pci.c create mode 100644 target/linux/amazon/files/arch/mips/amazon/prom.c create mode 100644 target/linux/amazon/files/arch/mips/amazon/setup.c create mode 100644 target/linux/amazon/files/drivers/atm/amazon_tpe.c create mode 100644 target/linux/amazon/files/drivers/char/admmod.c create mode 100644 target/linux/amazon/files/drivers/char/amazon_mei.c create mode 100644 target/linux/amazon/files/drivers/char/ifx_ssc.c create mode 100644 target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c create mode 100644 target/linux/amazon/files/drivers/mtd/maps/amazon.c create mode 100644 target/linux/amazon/files/drivers/net/amazon_sw.c create mode 100644 target/linux/amazon/files/drivers/serial/amazon_asc.c create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/adm6996.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/irq.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/model.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/port.h create mode 100644 target/linux/amazon/files/include/asm-mips/amazon/serial.h create mode 100644 target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h create mode 100644 target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h create mode 100644 target/linux/amazon/image/Makefile create mode 100644 target/linux/amazon/patches/017-wdt-driver.patch create mode 100644 target/linux/amazon/patches/100-board.patch create mode 100644 target/linux/amazon/patches/110-char_drivers.patch create mode 100644 target/linux/amazon/patches/130-mtd_drivers.patch create mode 100644 target/linux/amazon/patches/140-net_drivers.patch create mode 100644 target/linux/amazon/patches/150-serial_driver.patch create mode 100644 target/linux/amazon/patches/160-cfi-swap.patch delete mode 100644 target/linux/amcc-2.6/Makefile delete mode 100644 target/linux/amcc-2.6/base-files/default/etc/inittab delete mode 100644 target/linux/amcc-2.6/config/default delete mode 100644 target/linux/amcc-2.6/image/Makefile delete mode 100644 target/linux/amcc-2.6/patches/100-taishan_emac.patch delete mode 100644 target/linux/amcc-2.6/patches/110-openwrt_mtd_mapping.patch delete mode 100644 target/linux/amcc-2.6/patches/120-uncompressed_uImage.patch create mode 100644 target/linux/amcc/Makefile create mode 100644 target/linux/amcc/base-files/default/etc/inittab create mode 100644 target/linux/amcc/config/default create mode 100644 target/linux/amcc/image/Makefile create mode 100644 target/linux/amcc/patches/100-taishan_emac.patch create mode 100644 target/linux/amcc/patches/110-openwrt_mtd_mapping.patch create mode 100644 target/linux/amcc/patches/120-uncompressed_uImage.patch delete mode 100644 target/linux/ar7-2.6/Makefile delete mode 100644 target/linux/ar7-2.6/base-files.mk delete mode 100644 target/linux/ar7-2.6/base-files/default/etc/config/network delete mode 100644 target/linux/ar7-2.6/base-files/default/etc/diag.sh delete mode 100755 target/linux/ar7-2.6/base-files/default/etc/init.d/adam2 delete mode 100644 target/linux/ar7-2.6/config/default delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/Makefile delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/clock.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/gpio.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/irq.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/memory.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/platform.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/prom.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/setup.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/time.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c delete mode 100644 target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c delete mode 100644 target/linux/ar7-2.6/files/drivers/char/ar7_gpio.c delete mode 100644 target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c delete mode 100644 target/linux/ar7-2.6/files/drivers/leds/leds-ar7.c delete mode 100644 target/linux/ar7-2.6/files/drivers/mtd/ar7part.c delete mode 100644 target/linux/ar7-2.6/files/drivers/net/cpmac.c delete mode 100644 target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h delete mode 100644 target/linux/ar7-2.6/files/include/asm-mips/ar7/gpio.h delete mode 100644 target/linux/ar7-2.6/files/include/asm-mips/ar7/mmzone.h delete mode 100644 target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h delete mode 100644 target/linux/ar7-2.6/files/include/asm-mips/ar7/spaces.h delete mode 100644 target/linux/ar7-2.6/files/include/asm-mips/ar7/vlynq.h delete mode 100644 target/linux/ar7-2.6/files/include/asm-mips/gpio.h delete mode 100644 target/linux/ar7-2.6/image/Makefile delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/110-flash.patch delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/130-leds.patch delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/140-watchdog.patch delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/200-ethernet_driver.patch delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/210-phy_fixed.patch delete mode 100644 target/linux/ar7-2.6/patches-2.6.22/500-serial_kludge.patch delete mode 100644 target/linux/ar7-2.6/profiles/100-Texas.mk delete mode 100644 target/linux/ar7-2.6/profiles/110-None.mk delete mode 100644 target/linux/ar7-2.6/src/adam2patcher.c create mode 100644 target/linux/ar7/Makefile create mode 100644 target/linux/ar7/base-files.mk create mode 100644 target/linux/ar7/base-files/default/etc/config/network create mode 100644 target/linux/ar7/base-files/default/etc/diag.sh create mode 100755 target/linux/ar7/base-files/default/etc/init.d/adam2 create mode 100644 target/linux/ar7/config/default create mode 100644 target/linux/ar7/files/arch/mips/ar7/Makefile create mode 100644 target/linux/ar7/files/arch/mips/ar7/clock.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/gpio.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/irq.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/memory.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/platform.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/prom.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/setup.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/time.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c create mode 100644 target/linux/ar7/files/arch/mips/ar7/vlynq.c create mode 100644 target/linux/ar7/files/drivers/char/ar7_gpio.c create mode 100644 target/linux/ar7/files/drivers/char/watchdog/ar7_wdt.c create mode 100644 target/linux/ar7/files/drivers/leds/leds-ar7.c create mode 100644 target/linux/ar7/files/drivers/mtd/ar7part.c create mode 100644 target/linux/ar7/files/drivers/net/cpmac.c create mode 100644 target/linux/ar7/files/include/asm-mips/ar7/ar7.h create mode 100644 target/linux/ar7/files/include/asm-mips/ar7/gpio.h create mode 100644 target/linux/ar7/files/include/asm-mips/ar7/mmzone.h create mode 100644 target/linux/ar7/files/include/asm-mips/ar7/prom.h create mode 100644 target/linux/ar7/files/include/asm-mips/ar7/spaces.h create mode 100644 target/linux/ar7/files/include/asm-mips/ar7/vlynq.h create mode 100644 target/linux/ar7/files/include/asm-mips/gpio.h create mode 100644 target/linux/ar7/image/Makefile create mode 100644 target/linux/ar7/patches-2.6.22/100-board_support.patch create mode 100644 target/linux/ar7/patches-2.6.22/110-flash.patch create mode 100644 target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch create mode 100644 target/linux/ar7/patches-2.6.22/130-leds.patch create mode 100644 target/linux/ar7/patches-2.6.22/140-watchdog.patch create mode 100644 target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch create mode 100644 target/linux/ar7/patches-2.6.22/210-phy_fixed.patch create mode 100644 target/linux/ar7/patches-2.6.22/500-serial_kludge.patch create mode 100644 target/linux/ar7/profiles/100-Texas.mk create mode 100644 target/linux/ar7/profiles/110-None.mk create mode 100644 target/linux/ar7/src/adam2patcher.c delete mode 100644 target/linux/at91-2.6/Makefile delete mode 100644 target/linux/at91-2.6/base-files/default/etc/inittab delete mode 100644 target/linux/at91-2.6/base-files/default/etc/ipkg.conf delete mode 100644 target/linux/at91-2.6/config/default delete mode 100644 target/linux/at91-2.6/files/drivers/mtd/at91part.c delete mode 100644 target/linux/at91-2.6/image/Config.in delete mode 100644 target/linux/at91-2.6/image/Makefile delete mode 100644 target/linux/at91-2.6/image/dfboot/Makefile delete mode 100644 target/linux/at91-2.6/image/dfboot/src/Makefile delete mode 100644 target/linux/at91-2.6/image/dfboot/src/_udivsi3.S delete mode 100644 target/linux/at91-2.6/image/dfboot/src/_umodsi3.S delete mode 100644 target/linux/at91-2.6/image/dfboot/src/asm_isr.S delete mode 100644 target/linux/at91-2.6/image/dfboot/src/asm_mci_isr.S delete mode 100644 target/linux/at91-2.6/image/dfboot/src/at45.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/com.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/com.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/config.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/cstartup_ram.S delete mode 100644 target/linux/at91-2.6/image/dfboot/src/dataflash.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/dataflash.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/div0.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/elf32-littlearm.lds delete mode 100644 target/linux/at91-2.6/image/dfboot/src/embedded_services.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/include/AT91C_MCI_Device.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.inc delete mode 100644 target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200_inc.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/include/led.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/include/lib_AT91RM9200.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/init.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/jump.S delete mode 100644 target/linux/at91-2.6/image/dfboot/src/led.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/main.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/main.h delete mode 100644 target/linux/at91-2.6/image/dfboot/src/mci_device.c delete mode 100644 target/linux/at91-2.6/image/dfboot/src/stdio.h delete mode 100644 target/linux/at91-2.6/image/u-boot/Makefile delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/001-lowlevel-config.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/002-dataflash_machine.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/003-mac_init.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/004-mac_config.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/005-remove_float.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/006-generate_params.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/007-ubparams_bugfix.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/008-ubparams_bugfix.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/009-mac_init_bugfix.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/010-irda-patch-remove.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/011-ubparams_update.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/012-make_3.81.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/013-params-in-config.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/patches/014-ubparam-kernel.patch delete mode 100644 target/linux/at91-2.6/image/u-boot/ubclient/Makefile delete mode 100644 target/linux/at91-2.6/image/u-boot/ubclient/ubpar.c delete mode 100644 target/linux/at91-2.6/patches-2.6.21/000-at91patches.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/001-vlink-machine.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/002-led-driver.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/003-gpio-driver.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/006-change-gpios.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/007-mtd-partition.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/008-fdl-serial.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/009-fdl-uartinit.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/010-dm9161a-phyfix.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/011-vlink-resetfix.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/012-at91-mmcfix.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/013-at91-mmc1wire.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.21/014-initpartition.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/000-at91.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/001-vlink-machine.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/002-led-driver.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/003-gpio-driver.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/007-mtd-partition.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/008-fdl-serial.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/009-fdl-uartinit.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/010-dm9161a-phyfix.patch delete mode 100644 target/linux/at91-2.6/patches-2.6.22/014-initpartition.patch create mode 100644 target/linux/at91/Makefile create mode 100644 target/linux/at91/base-files/default/etc/inittab create mode 100644 target/linux/at91/base-files/default/etc/ipkg.conf create mode 100644 target/linux/at91/config/default create mode 100644 target/linux/at91/files/drivers/mtd/at91part.c create mode 100644 target/linux/at91/image/Config.in create mode 100644 target/linux/at91/image/Makefile create mode 100644 target/linux/at91/image/dfboot/Makefile create mode 100644 target/linux/at91/image/dfboot/src/Makefile create mode 100644 target/linux/at91/image/dfboot/src/_udivsi3.S create mode 100644 target/linux/at91/image/dfboot/src/_umodsi3.S create mode 100644 target/linux/at91/image/dfboot/src/asm_isr.S create mode 100644 target/linux/at91/image/dfboot/src/asm_mci_isr.S create mode 100644 target/linux/at91/image/dfboot/src/at45.c create mode 100644 target/linux/at91/image/dfboot/src/com.c create mode 100644 target/linux/at91/image/dfboot/src/com.h create mode 100644 target/linux/at91/image/dfboot/src/config.h create mode 100644 target/linux/at91/image/dfboot/src/cstartup_ram.S create mode 100644 target/linux/at91/image/dfboot/src/dataflash.c create mode 100644 target/linux/at91/image/dfboot/src/dataflash.h create mode 100644 target/linux/at91/image/dfboot/src/div0.c create mode 100644 target/linux/at91/image/dfboot/src/elf32-littlearm.lds create mode 100644 target/linux/at91/image/dfboot/src/embedded_services.h create mode 100644 target/linux/at91/image/dfboot/src/include/AT91C_MCI_Device.h create mode 100644 target/linux/at91/image/dfboot/src/include/AT91RM9200.h create mode 100644 target/linux/at91/image/dfboot/src/include/AT91RM9200.inc create mode 100644 target/linux/at91/image/dfboot/src/include/AT91RM9200_inc.h create mode 100644 target/linux/at91/image/dfboot/src/include/led.h create mode 100644 target/linux/at91/image/dfboot/src/include/lib_AT91RM9200.h create mode 100644 target/linux/at91/image/dfboot/src/init.c create mode 100644 target/linux/at91/image/dfboot/src/jump.S create mode 100644 target/linux/at91/image/dfboot/src/led.c create mode 100644 target/linux/at91/image/dfboot/src/main.c create mode 100644 target/linux/at91/image/dfboot/src/main.h create mode 100644 target/linux/at91/image/dfboot/src/mci_device.c create mode 100644 target/linux/at91/image/dfboot/src/stdio.h create mode 100644 target/linux/at91/image/u-boot/Makefile create mode 100644 target/linux/at91/image/u-boot/patches/001-lowlevel-config.patch create mode 100644 target/linux/at91/image/u-boot/patches/002-dataflash_machine.patch create mode 100644 target/linux/at91/image/u-boot/patches/003-mac_init.patch create mode 100644 target/linux/at91/image/u-boot/patches/004-mac_config.patch create mode 100644 target/linux/at91/image/u-boot/patches/005-remove_float.patch create mode 100644 target/linux/at91/image/u-boot/patches/006-generate_params.patch create mode 100644 target/linux/at91/image/u-boot/patches/007-ubparams_bugfix.patch create mode 100644 target/linux/at91/image/u-boot/patches/008-ubparams_bugfix.patch create mode 100644 target/linux/at91/image/u-boot/patches/009-mac_init_bugfix.patch create mode 100644 target/linux/at91/image/u-boot/patches/010-irda-patch-remove.patch create mode 100644 target/linux/at91/image/u-boot/patches/011-ubparams_update.patch create mode 100644 target/linux/at91/image/u-boot/patches/012-make_3.81.patch create mode 100644 target/linux/at91/image/u-boot/patches/013-params-in-config.patch create mode 100644 target/linux/at91/image/u-boot/patches/014-ubparam-kernel.patch create mode 100644 target/linux/at91/image/u-boot/ubclient/Makefile create mode 100644 target/linux/at91/image/u-boot/ubclient/ubpar.c create mode 100644 target/linux/at91/patches-2.6.21/000-at91patches.patch create mode 100644 target/linux/at91/patches-2.6.21/001-vlink-machine.patch create mode 100644 target/linux/at91/patches-2.6.21/002-led-driver.patch create mode 100644 target/linux/at91/patches-2.6.21/003-gpio-driver.patch create mode 100644 target/linux/at91/patches-2.6.21/006-change-gpios.patch create mode 100644 target/linux/at91/patches-2.6.21/007-mtd-partition.patch create mode 100644 target/linux/at91/patches-2.6.21/008-fdl-serial.patch create mode 100644 target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch create mode 100644 target/linux/at91/patches-2.6.21/010-dm9161a-phyfix.patch create mode 100644 target/linux/at91/patches-2.6.21/011-vlink-resetfix.patch create mode 100644 target/linux/at91/patches-2.6.21/012-at91-mmcfix.patch create mode 100644 target/linux/at91/patches-2.6.21/013-at91-mmc1wire.patch create mode 100644 target/linux/at91/patches-2.6.21/014-initpartition.patch create mode 100644 target/linux/at91/patches-2.6.22/000-at91.patch create mode 100644 target/linux/at91/patches-2.6.22/001-vlink-machine.patch create mode 100644 target/linux/at91/patches-2.6.22/002-led-driver.patch create mode 100644 target/linux/at91/patches-2.6.22/003-gpio-driver.patch create mode 100644 target/linux/at91/patches-2.6.22/007-mtd-partition.patch create mode 100644 target/linux/at91/patches-2.6.22/008-fdl-serial.patch create mode 100644 target/linux/at91/patches-2.6.22/009-fdl-uartinit.patch create mode 100644 target/linux/at91/patches-2.6.22/010-dm9161a-phyfix.patch create mode 100644 target/linux/at91/patches-2.6.22/014-initpartition.patch delete mode 100644 target/linux/atheros-2.6/Makefile delete mode 100755 target/linux/atheros-2.6/base-files/default/etc/preinit.arch delete mode 100644 target/linux/atheros-2.6/config/default delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/Kconfig delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/Makefile delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/Makefile delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/ar5312.h delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/board.c delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5312/irq.c delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/Makefile delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/ar5315.h delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/board.c delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar5315/irq.c delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/ar531x.h delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/board.c delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/prom.c delete mode 100644 target/linux/atheros-2.6/files/arch/mips/atheros/reset.c delete mode 100644 target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.c delete mode 100644 target/linux/atheros-2.6/files/drivers/mtd/devices/spiflash.h delete mode 100644 target/linux/atheros-2.6/files/drivers/net/ar2313/Makefile delete mode 100644 target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.c delete mode 100644 target/linux/atheros-2.6/files/drivers/net/ar2313/ar2313.h delete mode 100644 target/linux/atheros-2.6/files/drivers/net/ar2313/dma.h delete mode 100644 target/linux/atheros-2.6/files/include/asm-mips/mach-atheros/ar531x_platform.h delete mode 100644 target/linux/atheros-2.6/files/include/asm-mips/mach-atheros/dma-coherence.h delete mode 100644 target/linux/atheros-2.6/image/Makefile delete mode 100644 target/linux/atheros-2.6/patches/100-board.patch delete mode 100644 target/linux/atheros-2.6/patches/110-spiflash.patch delete mode 100644 target/linux/atheros-2.6/patches/130-ar2313_ethernet.patch delete mode 100644 target/linux/atheros-2.6/patches/140-redboot_partition_scan.patch create mode 100644 target/linux/atheros/Makefile create mode 100755 target/linux/atheros/base-files/default/etc/preinit.arch create mode 100644 target/linux/atheros/config/default create mode 100644 target/linux/atheros/files/arch/mips/atheros/Kconfig create mode 100644 target/linux/atheros/files/arch/mips/atheros/Makefile create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5312/Makefile create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5312/ar5312.h create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5312/board.c create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5312/irq.c create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5315/Makefile create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5315/ar5315.h create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5315/board.c create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar5315/irq.c create mode 100644 target/linux/atheros/files/arch/mips/atheros/ar531x.h create mode 100644 target/linux/atheros/files/arch/mips/atheros/board.c create mode 100644 target/linux/atheros/files/arch/mips/atheros/prom.c create mode 100644 target/linux/atheros/files/arch/mips/atheros/reset.c create mode 100644 target/linux/atheros/files/drivers/mtd/devices/spiflash.c create mode 100644 target/linux/atheros/files/drivers/mtd/devices/spiflash.h create mode 100644 target/linux/atheros/files/drivers/net/ar2313/Makefile create mode 100644 target/linux/atheros/files/drivers/net/ar2313/ar2313.c create mode 100644 target/linux/atheros/files/drivers/net/ar2313/ar2313.h create mode 100644 target/linux/atheros/files/drivers/net/ar2313/dma.h create mode 100644 target/linux/atheros/files/include/asm-mips/mach-atheros/ar531x_platform.h create mode 100644 target/linux/atheros/files/include/asm-mips/mach-atheros/dma-coherence.h create mode 100644 target/linux/atheros/image/Makefile create mode 100644 target/linux/atheros/patches/100-board.patch create mode 100644 target/linux/atheros/patches/110-spiflash.patch create mode 100644 target/linux/atheros/patches/130-ar2313_ethernet.patch create mode 100644 target/linux/atheros/patches/140-redboot_partition_scan.patch delete mode 100644 target/linux/au1000-2.6/Makefile delete mode 100644 target/linux/au1000-2.6/base-files/default/etc/diag.sh delete mode 100644 target/linux/au1000-2.6/config/default delete mode 100644 target/linux/au1000-2.6/files/drivers/leds/leds-mtx1.c delete mode 100644 target/linux/au1000-2.6/image/Makefile delete mode 100644 target/linux/au1000-2.6/patches/001-au1x00_gpio.patch delete mode 100644 target/linux/au1000-2.6/patches/005-au1000_eth_link_beat.patch delete mode 100644 target/linux/au1000-2.6/patches/006-mtx1_system_button.patch delete mode 100644 target/linux/au1000-2.6/patches/011-mtx1_leds.patch delete mode 100644 target/linux/au1000-2.6/patches/012-mtx1_cmdline.patch delete mode 100644 target/linux/au1000-2.6/patches/013-openwrt_rootfs.patch delete mode 100644 target/linux/au1000-2.6/patches/014-au1000_eth_ioctl.patch delete mode 100644 target/linux/au1000-2.6/patches/015-pci-resource.patch delete mode 100644 target/linux/au1000-2.6/patches/016-pci-io_map.patch delete mode 100644 target/linux/au1000-2.6/patches/017-usb-power.patch delete mode 100644 target/linux/au1000-2.6/profiles/Atheros.mk delete mode 100644 target/linux/au1000-2.6/profiles/Broadcom.mk delete mode 100644 target/linux/au1000-2.6/profiles/Intel.mk create mode 100644 target/linux/au1000/Makefile create mode 100644 target/linux/au1000/base-files/default/etc/diag.sh create mode 100644 target/linux/au1000/config/default create mode 100644 target/linux/au1000/files/drivers/leds/leds-mtx1.c create mode 100644 target/linux/au1000/image/Makefile create mode 100644 target/linux/au1000/patches/001-au1x00_gpio.patch create mode 100644 target/linux/au1000/patches/005-au1000_eth_link_beat.patch create mode 100644 target/linux/au1000/patches/006-mtx1_system_button.patch create mode 100644 target/linux/au1000/patches/011-mtx1_leds.patch create mode 100644 target/linux/au1000/patches/012-mtx1_cmdline.patch create mode 100644 target/linux/au1000/patches/013-openwrt_rootfs.patch create mode 100644 target/linux/au1000/patches/014-au1000_eth_ioctl.patch create mode 100644 target/linux/au1000/patches/015-pci-resource.patch create mode 100644 target/linux/au1000/patches/016-pci-io_map.patch create mode 100644 target/linux/au1000/patches/017-usb-power.patch create mode 100644 target/linux/au1000/profiles/Atheros.mk create mode 100644 target/linux/au1000/profiles/Broadcom.mk create mode 100644 target/linux/au1000/profiles/Intel.mk delete mode 100644 target/linux/avr32-2.6/Makefile delete mode 100644 target/linux/avr32-2.6/config/default delete mode 100644 target/linux/avr32-2.6/image/Makefile delete mode 100644 target/linux/avr32-2.6/patches/100-git_sync.patch delete mode 100644 target/linux/avr32-2.6/patches/110-openwrt_flashmap.patch create mode 100644 target/linux/avr32/Makefile create mode 100644 target/linux/avr32/config/default create mode 100644 target/linux/avr32/image/Makefile create mode 100644 target/linux/avr32/patches/100-git_sync.patch create mode 100644 target/linux/avr32/patches/110-openwrt_flashmap.patch delete mode 100644 target/linux/brcm47xx-2.6/Makefile delete mode 120000 target/linux/brcm47xx-2.6/base-files delete mode 120000 target/linux/brcm47xx-2.6/base-files.mk delete mode 100644 target/linux/brcm47xx-2.6/config/default delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/Makefile delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/cfe_env.c delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/include/nvram.h delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/irq.c delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/nvram.c delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/prom.c delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/setup.c delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/bcm947xx/time.c delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/cfe/Makefile delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/cfe/cfe.c delete mode 100644 target/linux/brcm47xx-2.6/files/arch/mips/cfe/cfe_private.h delete mode 100644 target/linux/brcm47xx-2.6/files/drivers/mtd/maps/bcm47xx-flash.c delete mode 100644 target/linux/brcm47xx-2.6/files/include/asm-generic/gpio.h delete mode 100644 target/linux/brcm47xx-2.6/files/include/asm-mips/cfe.h delete mode 100644 target/linux/brcm47xx-2.6/files/include/asm-mips/mach-bcm947xx/gpio.h delete mode 100644 target/linux/brcm47xx-2.6/files/include/asm-mips/mach-bcm947xx/kernel-entry-init.h delete mode 120000 target/linux/brcm47xx-2.6/image delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/100-board_support.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/110-flash_map.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/120-b44_ssb_support.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/130-remove_scache.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/150-cpu_fixes.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/160-kmap_coherent.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/170-cpu_wait.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/200-b44_ssb_fixup.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/210-ssb_fixes.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/230-ssb_arch_setup.patch delete mode 100644 target/linux/brcm47xx-2.6/patches-2.6.22/240-extif_fixes.patch delete mode 100644 target/linux/brcm47xx-2.6/profiles/100-Atheros.mk delete mode 100644 target/linux/brcm47xx-2.6/profiles/110-None.mk delete mode 100644 target/linux/brcm47xx-2.6/profiles/WGT634U.mk delete mode 100644 target/linux/brcm47xx-2.6/profiles/WRTSL54GS.mk delete mode 120000 target/linux/brcm47xx-2.6/src create mode 100644 target/linux/brcm47xx/Makefile create mode 120000 target/linux/brcm47xx/base-files create mode 120000 target/linux/brcm47xx/base-files.mk create mode 100644 target/linux/brcm47xx/config/default create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/Makefile create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/cfe_env.c create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/include/nvram.h create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/irq.c create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/nvram.c create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/prom.c create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/setup.c create mode 100644 target/linux/brcm47xx/files/arch/mips/bcm947xx/time.c create mode 100644 target/linux/brcm47xx/files/arch/mips/cfe/Makefile create mode 100644 target/linux/brcm47xx/files/arch/mips/cfe/cfe.c create mode 100644 target/linux/brcm47xx/files/arch/mips/cfe/cfe_private.h create mode 100644 target/linux/brcm47xx/files/drivers/mtd/maps/bcm47xx-flash.c create mode 100644 target/linux/brcm47xx/files/include/asm-generic/gpio.h create mode 100644 target/linux/brcm47xx/files/include/asm-mips/cfe.h create mode 100644 target/linux/brcm47xx/files/include/asm-mips/mach-bcm947xx/gpio.h create mode 100644 target/linux/brcm47xx/files/include/asm-mips/mach-bcm947xx/kernel-entry-init.h create mode 120000 target/linux/brcm47xx/image create mode 100644 target/linux/brcm47xx/patches-2.6.22/100-board_support.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/110-flash_map.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/120-b44_ssb_support.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/130-remove_scache.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/150-cpu_fixes.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/160-kmap_coherent.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/170-cpu_wait.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/200-b44_ssb_fixup.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/210-ssb_fixes.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/230-ssb_arch_setup.patch create mode 100644 target/linux/brcm47xx/patches-2.6.22/240-extif_fixes.patch create mode 100644 target/linux/brcm47xx/profiles/100-Atheros.mk create mode 100644 target/linux/brcm47xx/profiles/110-None.mk create mode 100644 target/linux/brcm47xx/profiles/WGT634U.mk create mode 100644 target/linux/brcm47xx/profiles/WRTSL54GS.mk create mode 120000 target/linux/brcm47xx/src delete mode 100644 target/linux/brcm63xx-2.6/Makefile delete mode 100644 target/linux/brcm63xx-2.6/config/default delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/Makefile delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/info.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/int-handler.S delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/irq.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/prom.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/ser_init.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/setup.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/time.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/bcm963xx/wdt.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/cfe/Makefile delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/cfe/cfe_private.h delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/pci/fixup-bcm96348.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/pci/ops-bcm96348.c delete mode 100644 target/linux/brcm63xx-2.6/files/arch/mips/pci/pci-bcm96348.c delete mode 100644 target/linux/brcm63xx-2.6/files/drivers/mtd/maps/bcm963xx-flash.c delete mode 100644 target/linux/brcm63xx-2.6/files/drivers/serial/bcm63xx_cons.c delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/cfe.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_intr.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/board.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h delete mode 100644 target/linux/brcm63xx-2.6/files/include/linux/atmrt2684.h delete mode 100644 target/linux/brcm63xx-2.6/image/Makefile delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/Makefile delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.c delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/LzmaDecode.h delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/Makefile delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/README delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.c delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/decompress.lds.in delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/head.S delete mode 100644 target/linux/brcm63xx-2.6/image/lzma-loader/src/loader.lds.in delete mode 100644 target/linux/brcm63xx-2.6/patches/001-bcm963xx.patch delete mode 100644 target/linux/brcm63xx-2.6/patches/002-bcm963xx_serial.patch delete mode 100644 target/linux/brcm63xx-2.6/patches/040-bcm963xx_flashmap.patch delete mode 100644 target/linux/brcm63xx-2.6/patches/100-atm_hacks.patch delete mode 100644 target/linux/brcm63xx-2.6/patches/150-sst_flash.patch delete mode 100644 target/linux/brcm63xx-2.6/profiles/Atheros.mk delete mode 100644 target/linux/brcm63xx-2.6/profiles/Broadcom.mk delete mode 100644 target/linux/brcm63xx-2.6/profiles/Ralink.mk create mode 100644 target/linux/brcm63xx/Makefile create mode 100644 target/linux/brcm63xx/config/default create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/Makefile create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/info.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/int-handler.S create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/irq.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/prom.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/ser_init.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/setup.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/time.c create mode 100644 target/linux/brcm63xx/files/arch/mips/bcm963xx/wdt.c create mode 100644 target/linux/brcm63xx/files/arch/mips/cfe/Makefile create mode 100644 target/linux/brcm63xx/files/arch/mips/cfe/cfe.c create mode 100644 target/linux/brcm63xx/files/arch/mips/cfe/cfe_private.h create mode 100644 target/linux/brcm63xx/files/arch/mips/pci/fixup-bcm96348.c create mode 100644 target/linux/brcm63xx/files/arch/mips/pci/ops-bcm96348.c create mode 100644 target/linux/brcm63xx/files/arch/mips/pci/pci-bcm96348.c create mode 100644 target/linux/brcm63xx/files/drivers/mtd/maps/bcm963xx-flash.c create mode 100644 target/linux/brcm63xx/files/drivers/serial/bcm63xx_cons.c create mode 100644 target/linux/brcm63xx/files/include/asm-mips/cfe.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_intr.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6338_map_part.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_intr.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6345_map_part.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_intr.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/6348_map_part.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmTag.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_intr.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmpci.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bcmtypes.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/board.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/bootloaders.h create mode 100644 target/linux/brcm63xx/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h create mode 100644 target/linux/brcm63xx/files/include/linux/atmrt2684.h create mode 100644 target/linux/brcm63xx/image/Makefile create mode 100644 target/linux/brcm63xx/image/lzma-loader/Makefile create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.c create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/LzmaDecode.h create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/Makefile create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/README create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/decompress.c create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/decompress.lds.in create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/head.S create mode 100644 target/linux/brcm63xx/image/lzma-loader/src/loader.lds.in create mode 100644 target/linux/brcm63xx/patches/001-bcm963xx.patch create mode 100644 target/linux/brcm63xx/patches/002-bcm963xx_serial.patch create mode 100644 target/linux/brcm63xx/patches/040-bcm963xx_flashmap.patch create mode 100644 target/linux/brcm63xx/patches/100-atm_hacks.patch create mode 100644 target/linux/brcm63xx/patches/150-sst_flash.patch create mode 100644 target/linux/brcm63xx/profiles/Atheros.mk create mode 100644 target/linux/brcm63xx/profiles/Broadcom.mk create mode 100644 target/linux/brcm63xx/profiles/Ralink.mk delete mode 100644 target/linux/etrax-2.6/Makefile delete mode 100644 target/linux/etrax-2.6/base-files.mk delete mode 100644 target/linux/etrax-2.6/base-files/default/etc/config/network delete mode 100644 target/linux/etrax-2.6/base-files/default/etc/ipkg.conf delete mode 100644 target/linux/etrax-2.6/base-files/default/etc/passwd delete mode 100644 target/linux/etrax-2.6/config/default delete mode 100644 target/linux/etrax-2.6/config/profile-vhdl_no_fb delete mode 100644 target/linux/etrax-2.6/files/arch/cris/arch-v10/drivers/gpio_syscalls.c delete mode 100644 target/linux/etrax-2.6/files/drivers/spi/spi_crisv32_gpio.c delete mode 100644 target/linux/etrax-2.6/files/drivers/spi/spi_crisv32_sser.c delete mode 100644 target/linux/etrax-2.6/files/drivers/usb/host/hc-cris-dbg.h delete mode 100644 target/linux/etrax-2.6/files/include/linux/mtd/mtdram.h delete mode 100644 target/linux/etrax-2.6/image/Config.in delete mode 100644 target/linux/etrax-2.6/image/Makefile delete mode 100755 target/linux/etrax-2.6/image/boot_linux delete mode 100644 target/linux/etrax-2.6/image/e100boot/Makefile delete mode 100644 target/linux/etrax-2.6/image/mkfimage/Makefile delete mode 100644 target/linux/etrax-2.6/image/mkfimage/src/Makefile delete mode 100644 target/linux/etrax-2.6/image/mkfimage/src/mkfimage.c delete mode 100644 target/linux/etrax-2.6/patches/cris/001-include-cris.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/002-arch-cris.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/003-drivers-cris.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/004-kernel-Kconfig.sched.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/005-loader.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/006-gcc-4.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/007-nr_free_pages.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/008-flashmap.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/008a-flashmap.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/009-sysfs.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/010-multi-target-build.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/011-debug-port delete mode 100644 target/linux/etrax-2.6/patches/cris/012-splash.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/013-crisdriver-sysfs.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/014-partition-tables.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/015-samsung-flash-chip.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/016-auto-detect-ram.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/017-uclibc-swab.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/018-reboot.patch delete mode 100644 target/linux/etrax-2.6/patches/cris/020-syscalls.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/001-squashfs.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/002-lzma_decompress.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/003-squashfs_lzma.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/004-extra_optimization.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/006-gcc4_inline_fix.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/007-samsung_flash.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/009-revert_intel_flash_breakage.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/010-disable_old_squashfs_compatibility.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/060-rootfs_split.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/065-block2mtd_init.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/100-netfilter_layer7_2.8.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/101-netfilter_layer7_pktmatch.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/110-ipp2p_0.8.1rc1.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/120-openswan-2.4.0.kernel-2.6-natt.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/130-netfilter-ipset.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/140-netfilter_time.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/150-netfilter_imq.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/160-netfilter_route.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/170-netfilter_chaostables.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/200-sched_esfq.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/201-multiple_default_gateways.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/204-jffs2_eofdetect.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/208-rtl8110sb_fix.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/209-mini_fo.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/210-d80211_compat.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/211-no_block2mtd_readahead.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/212-block2mtd_erase_scan.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/510-Yaffs.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/700-airprime.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/900-headers_type_and_time.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/901-asm_bitops_include.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/902-darwin_scripts_include.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/903-stddef_include.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/904-ls_time_locale.patch delete mode 100644 target/linux/etrax-2.6/patches/generic_2.6/905-zydas-zyxel.patch delete mode 100644 target/linux/etrax-2.6/profiles/100-generic.mk delete mode 100644 target/linux/etrax-2.6/profiles/101-vhdl-nofb.mk create mode 100644 target/linux/etrax/Makefile create mode 100644 target/linux/etrax/base-files.mk create mode 100644 target/linux/etrax/base-files/default/etc/config/network create mode 100644 target/linux/etrax/base-files/default/etc/ipkg.conf create mode 100644 target/linux/etrax/base-files/default/etc/passwd create mode 100644 target/linux/etrax/config/default create mode 100644 target/linux/etrax/config/profile-vhdl_no_fb create mode 100644 target/linux/etrax/files/arch/cris/arch-v10/drivers/gpio_syscalls.c create mode 100644 target/linux/etrax/files/drivers/spi/spi_crisv32_gpio.c create mode 100644 target/linux/etrax/files/drivers/spi/spi_crisv32_sser.c create mode 100644 target/linux/etrax/files/drivers/usb/host/hc-cris-dbg.h create mode 100644 target/linux/etrax/files/include/linux/mtd/mtdram.h create mode 100644 target/linux/etrax/image/Config.in create mode 100644 target/linux/etrax/image/Makefile create mode 100755 target/linux/etrax/image/boot_linux create mode 100644 target/linux/etrax/image/e100boot/Makefile create mode 100644 target/linux/etrax/image/mkfimage/Makefile create mode 100644 target/linux/etrax/image/mkfimage/src/Makefile create mode 100644 target/linux/etrax/image/mkfimage/src/mkfimage.c create mode 100644 target/linux/etrax/patches/cris/001-include-cris.patch create mode 100644 target/linux/etrax/patches/cris/002-arch-cris.patch create mode 100644 target/linux/etrax/patches/cris/003-drivers-cris.patch create mode 100644 target/linux/etrax/patches/cris/004-kernel-Kconfig.sched.patch create mode 100644 target/linux/etrax/patches/cris/005-loader.patch create mode 100644 target/linux/etrax/patches/cris/006-gcc-4.patch create mode 100644 target/linux/etrax/patches/cris/007-nr_free_pages.patch create mode 100644 target/linux/etrax/patches/cris/008-flashmap.patch create mode 100644 target/linux/etrax/patches/cris/008a-flashmap.patch create mode 100644 target/linux/etrax/patches/cris/009-sysfs.patch create mode 100644 target/linux/etrax/patches/cris/010-multi-target-build.patch create mode 100644 target/linux/etrax/patches/cris/011-debug-port create mode 100644 target/linux/etrax/patches/cris/012-splash.patch create mode 100644 target/linux/etrax/patches/cris/013-crisdriver-sysfs.patch create mode 100644 target/linux/etrax/patches/cris/014-partition-tables.patch create mode 100644 target/linux/etrax/patches/cris/015-samsung-flash-chip.patch create mode 100644 target/linux/etrax/patches/cris/016-auto-detect-ram.patch create mode 100644 target/linux/etrax/patches/cris/017-uclibc-swab.patch create mode 100644 target/linux/etrax/patches/cris/018-reboot.patch create mode 100644 target/linux/etrax/patches/cris/020-syscalls.patch create mode 100644 target/linux/etrax/patches/generic_2.6/001-squashfs.patch create mode 100644 target/linux/etrax/patches/generic_2.6/002-lzma_decompress.patch create mode 100644 target/linux/etrax/patches/generic_2.6/003-squashfs_lzma.patch create mode 100644 target/linux/etrax/patches/generic_2.6/004-extra_optimization.patch create mode 100644 target/linux/etrax/patches/generic_2.6/006-gcc4_inline_fix.patch create mode 100644 target/linux/etrax/patches/generic_2.6/007-samsung_flash.patch create mode 100644 target/linux/etrax/patches/generic_2.6/009-revert_intel_flash_breakage.patch create mode 100644 target/linux/etrax/patches/generic_2.6/010-disable_old_squashfs_compatibility.patch create mode 100644 target/linux/etrax/patches/generic_2.6/060-rootfs_split.patch create mode 100644 target/linux/etrax/patches/generic_2.6/065-block2mtd_init.patch create mode 100644 target/linux/etrax/patches/generic_2.6/100-netfilter_layer7_2.8.patch create mode 100644 target/linux/etrax/patches/generic_2.6/101-netfilter_layer7_pktmatch.patch create mode 100644 target/linux/etrax/patches/generic_2.6/110-ipp2p_0.8.1rc1.patch create mode 100644 target/linux/etrax/patches/generic_2.6/120-openswan-2.4.0.kernel-2.6-natt.patch create mode 100644 target/linux/etrax/patches/generic_2.6/130-netfilter-ipset.patch create mode 100644 target/linux/etrax/patches/generic_2.6/140-netfilter_time.patch create mode 100644 target/linux/etrax/patches/generic_2.6/150-netfilter_imq.patch create mode 100644 target/linux/etrax/patches/generic_2.6/160-netfilter_route.patch create mode 100644 target/linux/etrax/patches/generic_2.6/170-netfilter_chaostables.patch create mode 100644 target/linux/etrax/patches/generic_2.6/200-sched_esfq.patch create mode 100644 target/linux/etrax/patches/generic_2.6/201-multiple_default_gateways.patch create mode 100644 target/linux/etrax/patches/generic_2.6/204-jffs2_eofdetect.patch create mode 100644 target/linux/etrax/patches/generic_2.6/208-rtl8110sb_fix.patch create mode 100644 target/linux/etrax/patches/generic_2.6/209-mini_fo.patch create mode 100644 target/linux/etrax/patches/generic_2.6/210-d80211_compat.patch create mode 100644 target/linux/etrax/patches/generic_2.6/211-no_block2mtd_readahead.patch create mode 100644 target/linux/etrax/patches/generic_2.6/212-block2mtd_erase_scan.patch create mode 100644 target/linux/etrax/patches/generic_2.6/510-Yaffs.patch create mode 100644 target/linux/etrax/patches/generic_2.6/700-airprime.patch create mode 100644 target/linux/etrax/patches/generic_2.6/900-headers_type_and_time.patch create mode 100644 target/linux/etrax/patches/generic_2.6/901-asm_bitops_include.patch create mode 100644 target/linux/etrax/patches/generic_2.6/902-darwin_scripts_include.patch create mode 100644 target/linux/etrax/patches/generic_2.6/903-stddef_include.patch create mode 100644 target/linux/etrax/patches/generic_2.6/904-ls_time_locale.patch create mode 100644 target/linux/etrax/patches/generic_2.6/905-zydas-zyxel.patch create mode 100644 target/linux/etrax/profiles/100-generic.mk create mode 100644 target/linux/etrax/profiles/101-vhdl-nofb.mk delete mode 100644 target/linux/iop32x-2.6/Makefile delete mode 100644 target/linux/iop32x-2.6/base-files/default/etc/config/network delete mode 100644 target/linux/iop32x-2.6/config/default delete mode 100644 target/linux/iop32x-2.6/image/Makefile create mode 100644 target/linux/iop32x/Makefile create mode 100644 target/linux/iop32x/base-files/default/etc/config/network create mode 100644 target/linux/iop32x/config/default create mode 100644 target/linux/iop32x/image/Makefile delete mode 100644 target/linux/ixp4xx-2.6/Makefile delete mode 100644 target/linux/ixp4xx-2.6/base-files/default/etc/config/network delete mode 100644 target/linux/ixp4xx-2.6/config/default delete mode 100644 target/linux/ixp4xx-2.6/config/profile-FSG3 delete mode 100644 target/linux/ixp4xx-2.6/image/Config.in delete mode 100644 target/linux/ixp4xx-2.6/image/Makefile delete mode 100644 target/linux/ixp4xx-2.6/image/apex/Makefile delete mode 100644 target/linux/ixp4xx-2.6/image/apex/patches/100-slugos-nslu2-armeb_config.patch delete mode 100644 target/linux/ixp4xx-2.6/image/npe-ucode/Makefile delete mode 100644 target/linux/ixp4xx-2.6/image/npe-ucode/src/IxNpeMicrocode.h delete mode 100644 target/linux/ixp4xx-2.6/patches/050-dsmg600_upstream_support.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/070-ixp4xx_freq_fixup.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/080-trivial_nslu2_nas100d_cleanup.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/100-npe_driver.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/110-ixp4xx_net_driver_fix_mac_handling.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/139-ixp4xx_net_driver_mtd_load_fw.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/140-ixp4xx_net_driver_no_phy.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/141-nslu2_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/142-nas100d_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/143-nslu2_mtd_microcode.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/144-nas100d_mtd_microcode.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/152-nas100d_mtd_load_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/153-nslu2_mtd_load_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/160-nas100d_artop_temp_fix.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/178-via_velocity_bigendian.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/185-nslu2_rtc_fixup.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/186-nas100d_rtc_fixup.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/187-dsmg600_rtc_fixup.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/210-gateway_7001_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/212-gateway_7001_mtd_microcode.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/300-wg302v2.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/310-wg302v2_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/400-pronghorn_metro.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/410-pronghorn_metro_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/420-pronghorn_metro_mtd_microcode.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/430-pronghorn_metro_cf.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/500-compex.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/510-compex_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/520-compex_mtd_microcode.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/600-wrt300nv2.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/610-wrt300nv2_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/720-avila_setup_mac.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/740-avila_loft_mac_platform.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/750-avila_mtd_microcode.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/800-eeprom_new_notifier.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/900-no_loader_workaround.patch delete mode 100644 target/linux/ixp4xx-2.6/patches/996-fsg3_support.patch delete mode 100644 target/linux/ixp4xx-2.6/profiles/100-Default.mk delete mode 100644 target/linux/ixp4xx-2.6/profiles/200-NSLU2.mk delete mode 100644 target/linux/ixp4xx-2.6/profiles/300-NAS100d.mk delete mode 100644 target/linux/ixp4xx-2.6/profiles/400-DSMG600RevA.mk delete mode 100644 target/linux/ixp4xx-2.6/profiles/500-FSG3.mk create mode 100644 target/linux/ixp4xx/Makefile create mode 100644 target/linux/ixp4xx/base-files/default/etc/config/network create mode 100644 target/linux/ixp4xx/config/default create mode 100644 target/linux/ixp4xx/config/profile-FSG3 create mode 100644 target/linux/ixp4xx/image/Config.in create mode 100644 target/linux/ixp4xx/image/Makefile create mode 100644 target/linux/ixp4xx/image/apex/Makefile create mode 100644 target/linux/ixp4xx/image/apex/patches/100-slugos-nslu2-armeb_config.patch create mode 100644 target/linux/ixp4xx/image/npe-ucode/Makefile create mode 100644 target/linux/ixp4xx/image/npe-ucode/src/IxNpeMicrocode.h create mode 100644 target/linux/ixp4xx/patches/050-dsmg600_upstream_support.patch create mode 100644 target/linux/ixp4xx/patches/070-ixp4xx_freq_fixup.patch create mode 100644 target/linux/ixp4xx/patches/080-trivial_nslu2_nas100d_cleanup.patch create mode 100644 target/linux/ixp4xx/patches/100-npe_driver.patch create mode 100644 target/linux/ixp4xx/patches/110-ixp4xx_net_driver_fix_mac_handling.patch create mode 100644 target/linux/ixp4xx/patches/139-ixp4xx_net_driver_mtd_load_fw.patch create mode 100644 target/linux/ixp4xx/patches/140-ixp4xx_net_driver_no_phy.patch create mode 100644 target/linux/ixp4xx/patches/141-nslu2_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/142-nas100d_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/143-nslu2_mtd_microcode.patch create mode 100644 target/linux/ixp4xx/patches/144-nas100d_mtd_microcode.patch create mode 100644 target/linux/ixp4xx/patches/152-nas100d_mtd_load_mac.patch create mode 100644 target/linux/ixp4xx/patches/153-nslu2_mtd_load_mac.patch create mode 100644 target/linux/ixp4xx/patches/160-nas100d_artop_temp_fix.patch create mode 100644 target/linux/ixp4xx/patches/178-via_velocity_bigendian.patch create mode 100644 target/linux/ixp4xx/patches/185-nslu2_rtc_fixup.patch create mode 100644 target/linux/ixp4xx/patches/186-nas100d_rtc_fixup.patch create mode 100644 target/linux/ixp4xx/patches/187-dsmg600_rtc_fixup.patch create mode 100644 target/linux/ixp4xx/patches/200-gateway_7001.patch create mode 100644 target/linux/ixp4xx/patches/210-gateway_7001_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/212-gateway_7001_mtd_microcode.patch create mode 100644 target/linux/ixp4xx/patches/300-wg302v2.patch create mode 100644 target/linux/ixp4xx/patches/310-wg302v2_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/400-pronghorn_metro.patch create mode 100644 target/linux/ixp4xx/patches/410-pronghorn_metro_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/420-pronghorn_metro_mtd_microcode.patch create mode 100644 target/linux/ixp4xx/patches/430-pronghorn_metro_cf.patch create mode 100644 target/linux/ixp4xx/patches/500-compex.patch create mode 100644 target/linux/ixp4xx/patches/510-compex_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/520-compex_mtd_microcode.patch create mode 100644 target/linux/ixp4xx/patches/600-wrt300nv2.patch create mode 100644 target/linux/ixp4xx/patches/610-wrt300nv2_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/720-avila_setup_mac.patch create mode 100644 target/linux/ixp4xx/patches/740-avila_loft_mac_platform.patch create mode 100644 target/linux/ixp4xx/patches/750-avila_mtd_microcode.patch create mode 100644 target/linux/ixp4xx/patches/800-eeprom_new_notifier.patch create mode 100644 target/linux/ixp4xx/patches/900-no_loader_workaround.patch create mode 100644 target/linux/ixp4xx/patches/996-fsg3_support.patch create mode 100644 target/linux/ixp4xx/profiles/100-Default.mk create mode 100644 target/linux/ixp4xx/profiles/200-NSLU2.mk create mode 100644 target/linux/ixp4xx/profiles/300-NAS100d.mk create mode 100644 target/linux/ixp4xx/profiles/400-DSMG600RevA.mk create mode 100644 target/linux/ixp4xx/profiles/500-FSG3.mk delete mode 100644 target/linux/magicbox-2.6/Makefile delete mode 100644 target/linux/magicbox-2.6/config/default delete mode 100644 target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.c delete mode 100644 target/linux/magicbox-2.6/files/arch/ppc/platforms/4xx/magicbox.h delete mode 100644 target/linux/magicbox-2.6/files/drivers/ide/ppc/magicbox_ide.c delete mode 100644 target/linux/magicbox-2.6/image/Makefile delete mode 100644 target/linux/magicbox-2.6/patches-2.6.22/001-magicbox_support.patch delete mode 100644 target/linux/magicbox-2.6/patches-2.6.22/100-cf_slot.patch create mode 100644 target/linux/magicbox/Makefile create mode 100644 target/linux/magicbox/config/default create mode 100644 target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.c create mode 100644 target/linux/magicbox/files/arch/ppc/platforms/4xx/magicbox.h create mode 100644 target/linux/magicbox/files/drivers/ide/ppc/magicbox_ide.c create mode 100644 target/linux/magicbox/image/Makefile create mode 100644 target/linux/magicbox/patches-2.6.22/001-magicbox_support.patch create mode 100644 target/linux/magicbox/patches-2.6.22/100-cf_slot.patch delete mode 100644 target/linux/pxa-2.6/Makefile delete mode 100644 target/linux/pxa-2.6/config/default delete mode 120000 target/linux/pxa-2.6/image delete mode 100644 target/linux/pxa-2.6/patches/000-cpufreq.patch delete mode 100644 target/linux/pxa-2.6/patches/001-pm.patch delete mode 100644 target/linux/pxa-2.6/patches/002-usb_gadget.patch delete mode 100644 target/linux/pxa-2.6/patches/004-skbuf_hack.patch delete mode 100644 target/linux/pxa-2.6/patches/005-mtd.patch create mode 100644 target/linux/pxa/Makefile create mode 100644 target/linux/pxa/config/default create mode 120000 target/linux/pxa/image create mode 100644 target/linux/pxa/patches/000-cpufreq.patch create mode 100644 target/linux/pxa/patches/001-pm.patch create mode 100644 target/linux/pxa/patches/002-usb_gadget.patch create mode 100644 target/linux/pxa/patches/004-skbuf_hack.patch create mode 100644 target/linux/pxa/patches/005-mtd.patch delete mode 100644 target/linux/rb532-2.6/Makefile delete mode 100644 target/linux/rb532-2.6/base-files.mk delete mode 100644 target/linux/rb532-2.6/base-files/default/etc/config/network delete mode 100644 target/linux/rb532-2.6/base-files/default/etc/diag.sh delete mode 100755 target/linux/rb532-2.6/base-files/default/sbin/cf2nand delete mode 100755 target/linux/rb532-2.6/base-files/default/sbin/wget2nand delete mode 100644 target/linux/rb532-2.6/config/default delete mode 100644 target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/Makefile delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/devices.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/irq.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/misc.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/prom.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/serial.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/setup.c delete mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/time.c delete mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/Makefile delete mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/ata.c delete mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/ata.h delete mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/bdev.c delete mode 100644 target/linux/rb532-2.6/files/drivers/leds/leds-rb500.c delete mode 100644 target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c delete mode 100644 target/linux/rb532-2.6/files/drivers/net/korina.c delete mode 100644 target/linux/rb532-2.6/files/drivers/net/rc32434_eth.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/ddr.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma_v.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth_v.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/gpio.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/irq.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/pci.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/rb.h delete mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/rc32434.h delete mode 100644 target/linux/rb532-2.6/image/Makefile delete mode 100755 target/linux/rb532-2.6/image/gen_image.sh delete mode 100644 target/linux/rb532-2.6/patches/100-rb5xx_support.patch delete mode 100644 target/linux/rb532-2.6/patches/110-korina_ethernet.patch delete mode 100644 target/linux/rb532-2.6/patches/120-cf.patch delete mode 100644 target/linux/rb532-2.6/patches/140-cmdline_hack.patch delete mode 100644 target/linux/rb532-2.6/patches/200-bridge_resource_hack.patch delete mode 100644 target/linux/rb532-2.6/patches/220-serial_fix.patch delete mode 100644 target/linux/rb532-2.6/patches/240-via_rhine_performance.patch delete mode 100644 target/linux/rb532-2.6/patches/500-Nand.patch delete mode 100644 target/linux/rb532-2.6/patches/510-rb500_led.patch delete mode 100644 target/linux/rb532-2.6/src/patch-cmdline.c create mode 100644 target/linux/rb532/Makefile create mode 100644 target/linux/rb532/base-files.mk create mode 100644 target/linux/rb532/base-files/default/etc/config/network create mode 100644 target/linux/rb532/base-files/default/etc/diag.sh create mode 100755 target/linux/rb532/base-files/default/sbin/cf2nand create mode 100755 target/linux/rb532/base-files/default/sbin/wget2nand create mode 100644 target/linux/rb532/config/default create mode 100644 target/linux/rb532/files/arch/mips/pci/fixup-rb500.c create mode 100644 target/linux/rb532/files/arch/mips/pci/ops-rc32434.c create mode 100644 target/linux/rb532/files/arch/mips/pci/pci-rc32434.c create mode 100644 target/linux/rb532/files/arch/mips/rb500/Makefile create mode 100644 target/linux/rb532/files/arch/mips/rb500/devices.c create mode 100644 target/linux/rb532/files/arch/mips/rb500/irq.c create mode 100644 target/linux/rb532/files/arch/mips/rb500/misc.c create mode 100644 target/linux/rb532/files/arch/mips/rb500/prom.c create mode 100644 target/linux/rb532/files/arch/mips/rb500/serial.c create mode 100644 target/linux/rb532/files/arch/mips/rb500/setup.c create mode 100644 target/linux/rb532/files/arch/mips/rb500/time.c create mode 100644 target/linux/rb532/files/drivers/block/rb500/Makefile create mode 100644 target/linux/rb532/files/drivers/block/rb500/ata.c create mode 100644 target/linux/rb532/files/drivers/block/rb500/ata.h create mode 100644 target/linux/rb532/files/drivers/block/rb500/bdev.c create mode 100644 target/linux/rb532/files/drivers/leds/leds-rb500.c create mode 100644 target/linux/rb532/files/drivers/mtd/nand/rbmipsnand.c create mode 100644 target/linux/rb532/files/drivers/net/korina.c create mode 100644 target/linux/rb532/files/drivers/net/rc32434_eth.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/ddr.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/dma.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/dma_v.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/eth.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/eth_v.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/gpio.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/irq.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/pci.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/rb.h create mode 100644 target/linux/rb532/files/include/asm-mips/rc32434/rc32434.h create mode 100644 target/linux/rb532/image/Makefile create mode 100755 target/linux/rb532/image/gen_image.sh create mode 100644 target/linux/rb532/patches/100-rb5xx_support.patch create mode 100644 target/linux/rb532/patches/110-korina_ethernet.patch create mode 100644 target/linux/rb532/patches/120-cf.patch create mode 100644 target/linux/rb532/patches/140-cmdline_hack.patch create mode 100644 target/linux/rb532/patches/200-bridge_resource_hack.patch create mode 100644 target/linux/rb532/patches/220-serial_fix.patch create mode 100644 target/linux/rb532/patches/240-via_rhine_performance.patch create mode 100644 target/linux/rb532/patches/500-Nand.patch create mode 100644 target/linux/rb532/patches/510-rb500_led.patch create mode 100644 target/linux/rb532/src/patch-cmdline.c delete mode 100644 target/linux/rdc-2.6/Makefile delete mode 100644 target/linux/rdc-2.6/base-files/default/etc/diag.sh delete mode 100644 target/linux/rdc-2.6/config/default delete mode 100644 target/linux/rdc-2.6/config/profile-wl153 delete mode 100644 target/linux/rdc-2.6/files/arch/i386/kernel/cpu/rdc.c delete mode 100644 target/linux/rdc-2.6/files/arch/i386/mach-rdc/Makefile delete mode 100644 target/linux/rdc-2.6/files/arch/i386/mach-rdc/gpio.c delete mode 100644 target/linux/rdc-2.6/files/arch/i386/mach-rdc/platform.c delete mode 100644 target/linux/rdc-2.6/files/arch/i386/mach-rdc/wdt.c delete mode 100644 target/linux/rdc-2.6/files/drivers/leds/leds-rdc3211.c delete mode 100644 target/linux/rdc-2.6/files/drivers/mtd/maps/imghdr.h delete mode 100644 target/linux/rdc-2.6/files/drivers/mtd/maps/rdc3210.c delete mode 100644 target/linux/rdc-2.6/files/drivers/net/r6040.c delete mode 100644 target/linux/rdc-2.6/files/include/asm-i386/gpio.h delete mode 100644 target/linux/rdc-2.6/files/include/asm-i386/mach-generic/gpio.h delete mode 100644 target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/gpio.h delete mode 100644 target/linux/rdc-2.6/files/include/asm-i386/mach-rdc/rdc321x_defs.h delete mode 100644 target/linux/rdc-2.6/image/Makefile delete mode 100644 target/linux/rdc-2.6/patches/000-rdc_fixes.patch delete mode 100644 target/linux/rdc-2.6/patches/001-rdc3210_flash_map.patch delete mode 100644 target/linux/rdc-2.6/patches/002-r6040_ethernet.patch delete mode 100644 target/linux/rdc-2.6/patches/003-rootfstype.patch delete mode 100644 target/linux/rdc-2.6/patches/004-rdc3211_leds.patch delete mode 100644 target/linux/rdc-2.6/patches/005-rdc_x86_cpu_type.patch delete mode 100644 target/linux/rdc-2.6/patches/600-x86_lzma.patch delete mode 100644 target/linux/rdc-2.6/profiles/AR525W.mk delete mode 100644 target/linux/rdc-2.6/profiles/WL-153.mk create mode 100644 target/linux/rdc/Makefile create mode 100644 target/linux/rdc/base-files/default/etc/diag.sh create mode 100644 target/linux/rdc/config/default create mode 100644 target/linux/rdc/config/profile-wl153 create mode 100644 target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c create mode 100644 target/linux/rdc/files/arch/i386/mach-rdc/Makefile create mode 100644 target/linux/rdc/files/arch/i386/mach-rdc/gpio.c create mode 100644 target/linux/rdc/files/arch/i386/mach-rdc/platform.c create mode 100644 target/linux/rdc/files/arch/i386/mach-rdc/wdt.c create mode 100644 target/linux/rdc/files/drivers/leds/leds-rdc3211.c create mode 100644 target/linux/rdc/files/drivers/mtd/maps/imghdr.h create mode 100644 target/linux/rdc/files/drivers/mtd/maps/rdc3210.c create mode 100644 target/linux/rdc/files/drivers/net/r6040.c create mode 100644 target/linux/rdc/files/include/asm-i386/gpio.h create mode 100644 target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h create mode 100644 target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h create mode 100644 target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h create mode 100644 target/linux/rdc/image/Makefile create mode 100644 target/linux/rdc/patches/000-rdc_fixes.patch create mode 100644 target/linux/rdc/patches/001-rdc3210_flash_map.patch create mode 100644 target/linux/rdc/patches/002-r6040_ethernet.patch create mode 100644 target/linux/rdc/patches/003-rootfstype.patch create mode 100644 target/linux/rdc/patches/004-rdc3211_leds.patch create mode 100644 target/linux/rdc/patches/005-rdc_x86_cpu_type.patch create mode 100644 target/linux/rdc/patches/600-x86_lzma.patch create mode 100644 target/linux/rdc/profiles/AR525W.mk create mode 100644 target/linux/rdc/profiles/WL-153.mk delete mode 100644 target/linux/sibyte-2.6/Makefile delete mode 100644 target/linux/sibyte-2.6/base-files/default/etc/config/network delete mode 100644 target/linux/sibyte-2.6/base-files/default/etc/inittab delete mode 100644 target/linux/sibyte-2.6/config/default delete mode 100644 target/linux/sibyte-2.6/image/Makefile delete mode 100644 target/linux/sibyte-2.6/patches/000-DUART.patch create mode 100644 target/linux/sibyte/Makefile create mode 100644 target/linux/sibyte/base-files/default/etc/config/network create mode 100644 target/linux/sibyte/base-files/default/etc/inittab create mode 100644 target/linux/sibyte/config/default create mode 100644 target/linux/sibyte/image/Makefile create mode 100644 target/linux/sibyte/patches/000-DUART.patch delete mode 100644 target/linux/uml-2.6/Makefile delete mode 100644 target/linux/uml-2.6/README delete mode 100644 target/linux/uml-2.6/config/i386 delete mode 100644 target/linux/uml-2.6/config/x86_64 delete mode 100755 target/linux/uml-2.6/image/Makefile create mode 100644 target/linux/uml/Makefile create mode 100644 target/linux/uml/README create mode 100644 target/linux/uml/config/i386 create mode 100644 target/linux/uml/config/x86_64 create mode 100755 target/linux/uml/image/Makefile delete mode 100644 target/linux/x86-2.6/Makefile delete mode 100644 target/linux/x86-2.6/base-files/default/etc/preinit.arch delete mode 100644 target/linux/x86-2.6/base-files/default/lib/upgrade/platform.sh delete mode 100644 target/linux/x86-2.6/config/default delete mode 100644 target/linux/x86-2.6/config/profile-Generic delete mode 100644 target/linux/x86-2.6/config/profile-s100 delete mode 100644 target/linux/x86-2.6/image/Config.in delete mode 100644 target/linux/x86-2.6/image/Makefile delete mode 100755 target/linux/x86-2.6/image/gen_image.sh delete mode 100644 target/linux/x86-2.6/image/grub/Makefile delete mode 100644 target/linux/x86-2.6/image/grub/menu.lst delete mode 100644 target/linux/x86-2.6/image/grub/patches/010-fixes-1.patch delete mode 100644 target/linux/x86-2.6/profiles/000-Generic.mk delete mode 100644 target/linux/x86-2.6/profiles/Soekris.mk delete mode 100644 target/linux/x86-2.6/profiles/s100.mk create mode 100644 target/linux/x86/Makefile create mode 100644 target/linux/x86/base-files/default/etc/preinit.arch create mode 100644 target/linux/x86/base-files/default/lib/upgrade/platform.sh create mode 100644 target/linux/x86/config/default create mode 100644 target/linux/x86/config/profile-Generic create mode 100644 target/linux/x86/config/profile-s100 create mode 100644 target/linux/x86/image/Config.in create mode 100644 target/linux/x86/image/Makefile create mode 100755 target/linux/x86/image/gen_image.sh create mode 100644 target/linux/x86/image/grub/Makefile create mode 100644 target/linux/x86/image/grub/menu.lst create mode 100644 target/linux/x86/image/grub/patches/010-fixes-1.patch create mode 100644 target/linux/x86/profiles/000-Generic.mk create mode 100644 target/linux/x86/profiles/Soekris.mk create mode 100644 target/linux/x86/profiles/s100.mk (limited to 'target') diff --git a/target/linux/Makefile b/target/linux/Makefile index 608cfa8eb0..1eb579e82e 100644 --- a/target/linux/Makefile +++ b/target/linux/Makefile @@ -8,5 +8,5 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/target.mk prereq clean download prepare compile install menuconfig oldconfig update refresh: FORCE - $(MAKE) -C $(BOARD)-$(KERNEL) $@ + $(MAKE) -C $(BOARD) $@ diff --git a/target/linux/adm5120-2.6/Makefile b/target/linux/adm5120-2.6/Makefile deleted file mode 100644 index f8436c04ed..0000000000 --- a/target/linux/adm5120-2.6/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mipsel -BOARD:=adm5120 -BOARDNAME:=ADM5120 (Little Endian) -FEATURES:=squashfs jffs2 tgz broken - -LINUX_VERSION:=2.6.22.4 - -define Target/Description - Build firmware images for Infineon/ADMtek ADM5120 based boards - (e.g : RouterBoard RB1xx, Compex WP54G-WRT ...) -endef - -include $(INCLUDE_DIR)/kernel-build.mk -DEFAULT_PACKAGES += admswconfig - -# include the profiles --include profiles/*.mk - -$(eval $(call BuildKernel)) diff --git a/target/linux/adm5120-2.6/base-files/default/sbin/wget2nand b/target/linux/adm5120-2.6/base-files/default/sbin/wget2nand deleted file mode 100755 index adb56b946f..0000000000 --- a/target/linux/adm5120-2.6/base-files/default/sbin/wget2nand +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh -# wget2nand -# This script can be used to download a TGZ file from your build system which -# contains the files to be installed on the NAND flash on your RB1xx card. -# The one parameter is the URL of the TGZ file to be downloaded. -# Licence GPL V2 -# Author david.goodenough@linkchoose.co.uk -# Based on cf2nand from RB532 support -. /etc/functions.sh - -[ -d /tmp/wget2nand ] && { - echo "/tmp/wget2nand already exists" - exit 1 -} - -# first get an address for br-lan using udhcpc -killall udhcpc -/sbin/udhcpc -i br-lan - -# need to find the wget server from the command line -url=$1 -[ -z "$url" ] && { - echo "No URL specified for image TGZ" - echo "Usage : $0 URL" - exit 1 -} - -boot="$(find_mtd_part 'RouterBoard NAND Boot')" -main="$(find_mtd_part 'rootfs')" -[ -z "$boot" -o -z "$main" ] && { - echo "Cannot find NAND Flash partitions" - exit 1 -} - -echo "Erasing filesystem." -mtd erase Boot 2>/dev/null >/dev/null -mtd erase Main 2>/dev/null >/dev/null - -echo "Mounting $main as new root and $boot as boot partition" - -mkdir /tmp/wget2nand/ -mkdir /tmp/wget2nand-boot -mount -t yaffs2 "$main" /tmp/wget2nand/ -mount -t yaffs2 "$boot" /tmp/wget2nand-boot - -echo "Copying filesystem..." -( wget -O - $url/openwrt-adm5120-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz ) -wget -O /tmp/wget2nand-boot/kernel $url/openwrt-adm5120-2.6-rb1xx-vmlinux - -chmod +x /tmp/wget2nand-boot/kernel - -# make sure everything is written before we unmount the partitions -echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission -sync -ls /tmp/wget2nand-boot/ -ls /tmp/wget2nand/ -# unmount the partitions and remove the directories into which they were mounted -umount /tmp/wget2nand-boot -umount /tmp/wget2nand -rmdir /tmp/wget2nand-boot -rmdir /tmp/wget2nand - -# all done -echo "Image written, you can now reboot. Remember to change the boot source to Boot from Nand" diff --git a/target/linux/adm5120-2.6/config/default b/target/linux/adm5120-2.6/config/default deleted file mode 100644 index 593d98ce4f..0000000000 --- a/target/linux/adm5120-2.6/config/default +++ /dev/null @@ -1,289 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_ADM5120_CPU_OVERRIDES=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARM_AMBA=y -# CONFIG_ATM_DRIVERS is not set -CONFIG_BASE_SMALL=0 -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BINFMT_MISC=m -CONFIG_BITREVERSE=y -CONFIG_CIFS_DEBUG2=y -CONFIG_CIFS_EXPERIMENTAL=y -CONFIG_CIFS_STATS2=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_XATTR=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit" -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRYPTO_SHA1=y -# CONFIG_DDB5477 is not set -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_EXT3_FS_XATTR=y -CONFIG_FS_MBCACHE=m -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -# CONFIG_GEN_RTC is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HID=m -CONFIG_HWMON=y -# CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_INPUT=y -# CONFIG_INPUT_EVDEV is not set -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IRQ_CPU=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JOLIET is not set -CONFIG_LEDS_ADM5120=y -CONFIG_LEDS_ADM5120_DIAG=y -# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set -CONFIG_LEDS_GPIO=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MII=m -# CONFIG_MINIX_FS is not set -CONFIG_MIPS=y -CONFIG_MIPS_ADM5120=y -CONFIG_MIPS_ADM5120_ENET=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_ADM5120=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -CONFIG_MTD_MYLOADER_PARTS=y -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_CAFE is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=y -# CONFIG_MTD_NAND_MUSEUM_IDS is not set -# CONFIG_MTD_NAND_NANDSIM is not set -# CONFIG_MTD_NAND_PLATFORM is not set -CONFIG_MTD_NAND_RB100=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NETDEV_1000 is not set -CONFIG_NET_KEY=y -# CONFIG_NET_PCI is not set -# CONFIG_NET_PKTGEN is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_ADM5120=y -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNPACPI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250 is not set -# CONFIG_SERIAL_ADM5120 is not set -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 -CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIO=y -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_USB=y -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_ADM5120_HCD=m -# CONFIG_USB_ALI_M5632 is not set -# CONFIG_USB_AN2720 is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_NET_DM9601 is not set -# CONFIG_USB_NET_GL620A is not set -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_V4L1=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_YAFFS_9BYTE_TAGS=y -# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set -CONFIG_YAFFS_AUTO_YAFFS2=y -CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 -# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set -# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set -CONFIG_YAFFS_FS=y -CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y -CONFIG_YAFFS_YAFFS1=y -CONFIG_YAFFS_YAFFS2=y -# CONFIG_ZD1211RW is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig deleted file mode 100644 index 7738d8175b..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Kconfig +++ /dev/null @@ -1,20 +0,0 @@ -if MIPS_ADM5120 - -menu "ADM5120 Implementation Options" - -config ADM5120_CPU_OVERRIDES - bool "Enable CPU feature overrides" - default y - -config PCI_ADM5120 - bool "Enable PCI support" - select PCI - default y - -endmenu - -config ARM_AMBA - bool - default y - -endif diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile deleted file mode 100644 index bb0a7c8b06..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel -# - -obj-y := setup.o prom.o irq.o memory.o adm5120_info.o -obj-y += board.o -obj-y += clock.o -obj-y += gpio.o -obj-y += platform.o -obj-y += reset.o -obj-y += time.o - -obj-y += trxsplit.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c deleted file mode 100644 index e2ee5ca565..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/adm5120_info.c +++ /dev/null @@ -1,93 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include - -unsigned int adm5120_product_code; -unsigned int adm5120_revision; -unsigned int adm5120_package; -unsigned int adm5120_nand_boot; -unsigned long adm5120_speed; - -#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) -#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) - -/* - * CPU settings detection - */ -#define CODE_GET_PC(c) ((c) & CODE_PC_MASK) -#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK) -#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK) -#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK) -#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0) - -void adm5120_ndelay(u32 ns) -{ - u32 t; - - SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); - SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); - - t = (ns+640) / 640; - t &= TIMER_PERIOD_MASK; - SWITCH_WRITE(SWITCH_REG_TIMER, t | TIMER_TE); - - /* wait until the timer expires */ - do { - t = SWITCH_READ(SWITCH_REG_TIMER_INT); - } while ((t & TIMER_INT_TOS) == 0); - - /* leave the timer disabled */ - SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); - SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); -} - -void __init adm5120_soc_init(void) -{ - u32 code; - u32 clks; - - code = SWITCH_READ(SWITCH_REG_CODE); - - adm5120_product_code = CODE_GET_PC(code); - adm5120_revision = CODE_GET_REV(code); - adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ? - ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP; - adm5120_nand_boot = CODE_GET_NAB(code); - - clks = CODE_GET_CLKS(code); - adm5120_speed = ADM5120_SPEED_175; - if (clks & 1) - adm5120_speed += 25000000; - if (clks & 2) - adm5120_speed += 50000000; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c deleted file mode 100644 index 74bacaa2e8..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/board.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * $Id$ - * - * ADM5120 generic board code - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -static LIST_HEAD(adm5120_boards); -static char adm5120_board_name[ADM5120_BOARD_NAMELEN]; - -const char *get_system_type(void) -{ - return adm5120_board_name; -} - -static struct adm5120_board * __init adm5120_board_find(unsigned long machtype) -{ - struct list_head *this; - struct adm5120_board *board; - void *ret; - - ret = NULL; - list_for_each(this, &adm5120_boards) { - board = list_entry(this, struct adm5120_board, list); - if (board->mach_type == machtype) { - ret = board; - break; - } - } - - return ret; -} - -static int __init adm5120_board_setup(void) -{ - struct adm5120_board *board; - int err; - - board = adm5120_board_find(mips_machtype); - if (board == NULL) { - printk(KERN_ALERT "adm5120: no board registered for machtype %lu" - ", trying generic\n", mips_machtype); - board = adm5120_board_find(MACH_ADM5120_GENERIC); - if (board == NULL) - panic("adm5120: unsupported board\n"); - } - - printk(KERN_INFO "adm5120: setting up board '%s'\n", board->name); - - memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN); - - adm5120_board_reset = board->board_reset; - if (board->eth_num_ports > 0) - adm5120_eth_num_ports = board->eth_num_ports; - - if (board->eth_vlans) - memcpy(adm5120_eth_vlans, board->eth_vlans, - sizeof(adm5120_eth_vlans)); - - - if (board->board_setup) - board->board_setup(); - - /* register UARTs */ - amba_device_register(&adm5120_uart0_device, &iomem_resource); - amba_device_register(&adm5120_uart1_device, &iomem_resource); - - /* register PCI controller */ - if (adm5120_package_bga()) - platform_device_register(&adm5120_pci_device); - - /* register board devices */ - if (board->num_devices > 0 && board->devices != NULL ) { - err = platform_add_devices(board->devices, board->num_devices); - if (err) - printk(KERN_ALERT "adm5120: adding board devices failed\n"); - } - - return 0; -} - -void __init adm5120_board_register(struct adm5120_board *board) -{ - list_add(&board->list, &adm5120_boards); - printk(KERN_INFO "adm5120: registered board '%s'\n", board->name); -} - -void __init adm5120_register_boards(struct adm5120_board **boards, - int num) -{ - int i; - - for (i=0; i - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition cas6xx_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "nvfs1", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "nvfs2", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition cas7xx_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "nvfs", - .offset = MTDPART_OFS_APPEND, - .size = 128*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *cas6xx_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct platform_device *cas7xx_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init cas6xx_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); - adm5120_flash0_data.parts = cas6xx_partitions; - - /* TODO: setup mac address */ -} - -static void __init cas7xx_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); - adm5120_flash0_data.parts = cas7xx_partitions; - - /* TODO: setup mac address */ -} - -static struct adm5120_board cas630_board __initdata = { - .mach_type = MACH_ADM5120_CAS630, - .name = "Cellvision CAS-630/630W", - .board_setup = cas6xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas6xx_devices), - .devices = cas6xx_devices, -}; - -static struct adm5120_board cas670_board __initdata = { - .mach_type = MACH_ADM5120_CAS670, - .name = "Cellvision CAS-670/670W", - .board_setup = cas6xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas6xx_devices), - .devices = cas6xx_devices, -}; - -static struct adm5120_board cas700_board __initdata = { - .mach_type = MACH_ADM5120_CAS700, - .name = "Cellvision CAS-700/700W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas771_board __initdata = { - .mach_type = MACH_ADM5120_CAS771, - .name = "Cellvision CAS-771/771W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas790_board __initdata = { - .mach_type = MACH_ADM5120_CAS790, - .name = "Cellvision CAS-790", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static struct adm5120_board cas861_board __initdata = { - .mach_type = MACH_ADM5120_CAS861, - .name = "Cellvision CAS-861/861W", - .board_setup = cas7xx_setup, - .eth_num_ports = 1, - .num_devices = ARRAY_SIZE(cas7xx_devices), - .devices = cas7xx_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&cas630_board); - adm5120_board_register(&cas670_board); - adm5120_board_register(&cas700_board); - adm5120_board_register(&cas771_board); - adm5120_board_register(&cas790_board); - adm5120_board_register(&cas861_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c deleted file mode 100644 index 620179744e..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/compex.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * $Id$ - * - * Compex boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static void wp54_reset(void) -{ - gpio_set_value(ADM5120_GPIO_PIN3, 0); -} - -static struct mtd_partition wp54g_wrt_partitions[] = { - { - .name = "cfe", - .offset = 0, - .size = 0x050000, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "trx", - .offset = MTDPART_OFS_APPEND, - .size = 0x3A0000, - } , { - .name = "nvram", - .offset = MTDPART_OFS_APPEND, - .size = 0x010000, - } -}; - -static struct platform_device *np2xg_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device, -}; - -static struct platform_device *wp54_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init np2xg_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - - /* TODO: setup mac address */ -} - -static void __init wp54_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ - gpio_direction_output(ADM5120_GPIO_PIN3, 1); - - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - - /* TODO: setup mac address */ -} - -static void __init wp54_wrt_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ - gpio_direction_output(ADM5120_GPIO_PIN3, 1); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions); - adm5120_flash0_data.parts = wp54g_wrt_partitions; - - /* TODO: setup mac address */ -} - -unsigned char np27g_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; - -unsigned char np28g_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x00, 0x00 -}; - -unsigned char wp54_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x00, 0x00, 0x00, 0x00 -}; - -static struct adm5120_board np27g_board __initdata = { - .mach_type = MACH_ADM5120_NP27G, - .name = "Compex NetPassage 27G", - .board_setup = np2xg_setup, - .eth_num_ports = 5, - .eth_vlans = np27g_vlans, - .num_devices = ARRAY_SIZE(np2xg_devices), - .devices = np2xg_devices, -}; - -static struct adm5120_board np28g_board __initdata = { - .mach_type = MACH_ADM5120_NP28G, - .name = "Compex NetPassage 28G", - .board_setup = np2xg_setup, - .eth_num_ports = 4, - .eth_vlans = np28g_vlans, - .num_devices = ARRAY_SIZE(np2xg_devices), - .devices = np2xg_devices, -}; - -static struct adm5120_board wp54ag_board __initdata = { - .mach_type = MACH_ADM5120_WP54AG, - .name = "Compex WP54AG", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wp54g_board __initdata = { - .mach_type = MACH_ADM5120_WP54G, - .name = "Compex WP54G", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wp54g_wrt_board __initdata = { - .mach_type = MACH_ADM5120_WP54G, - .name = "Compex WP54G-WRT", - .board_setup = wp54_wrt_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wpp54ag_board __initdata = { - .mach_type = MACH_ADM5120_WPP54AG, - .name = "Compex WPP54AG", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static struct adm5120_board wpp54g_board __initdata = { - .mach_type = MACH_ADM5120_WPP54G, - .name = "Compex WPP54G", - .board_setup = wp54_setup, - .board_reset = wp54_reset, - .eth_num_ports = 2, - .eth_vlans = wp54_vlans, - .num_devices = ARRAY_SIZE(wp54_devices), - .devices = wp54_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&np27g_board); - adm5120_board_register(&np28g_board); - adm5120_board_register(&wp54ag_board); - adm5120_board_register(&wp54g_board); - adm5120_board_register(&wp54g_wrt_board); - adm5120_board_register(&wpp54ag_board); - adm5120_board_register(&wpp54g_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c deleted file mode 100644 index a184cbce44..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/edimax.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * $Id$ - * - * Edimax boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static struct mtd_partition br6104k_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 32*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = 32*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *br6104k_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static void __init br6104k_setup(void) { - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions); - adm5120_flash0_data.parts = br6104k_partitions; - - /* TODO: setup mac addresses, if possible */ -} - -unsigned char br6104k_vlans[6] = { - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; - -static struct adm5120_board br6104k_board __initdata = { - .mach_type = MACH_ADM5120_BR6104K, - .name = "Edimax BR-6104K", - .board_setup = br6104k_setup, - .eth_num_ports = 5, - .eth_vlans = br6104k_vlans, - .num_devices = ARRAY_SIZE(br6104k_devices), - .devices = br6104k_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&br6104k_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c deleted file mode 100644 index de78ca40ea..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/generic.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * $Id$ - * - * Generic ADM5120 based board - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static struct platform_device *generic_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct adm5120_board generic_board __initdata = { - .mach_type = MACH_ADM5120_GENERIC, - .name = "Generic ADM5120 board", - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(generic_devices), - .devices = generic_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&generic_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c deleted file mode 100644 index ebeb5aa87b..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/infineon.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * $Id$ - * - * Infineon boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio3(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN3, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN3, 1); - break; - } -} - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition easy_partitions[] = { - { - .name = "admboot", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "boardcfg", - .offset = MTDPART_OFS_APPEND, - .size = 64*1024, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *easy5120pata_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINETIC2 device? */ -}; - -static struct platform_device *easy5120rt_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device -}; - -static struct platform_device *easy5120wvoip_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINETIC2 device? */ -}; - -static struct platform_device *easy83000_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: add VINAX device? */ -}; - -static void __init easy_setup_pqfp(void) -{ - gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN3, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio3; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - /* TODO: setup mac addresses */ -} - -static void __init easy_setup_bga(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); - adm5120_flash0_data.parts = easy_partitions; - - /* TODO: setup mac addresses */ -} - -static struct adm5120_board easy5120pata_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120PATA, - .name = "Infineon EASY 5120P-ATA Reference Board", - .board_setup = easy_setup_pqfp, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy5120pata_devices), - .devices = easy5120pata_devices, -}; - -static struct adm5120_board easy5120rt_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120RT, - .name = "Infineon EASY 5120-RT Reference Board", - .board_setup = easy_setup_bga, - .eth_num_ports = 5, - .num_devices = ARRAY_SIZE(easy5120rt_devices), - .devices = easy5120rt_devices, -}; - -static struct adm5120_board easy5120wvoip_board __initdata = { - .mach_type = MACH_ADM5120_EASY5120WVOIP, - .name = "Infineon EASY 5120-WVoIP Reference Board", - .board_setup = easy_setup_bga, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy5120wvoip_devices), - .devices = easy5120wvoip_devices, -}; - -static struct adm5120_board easy83000_board __initdata = { - .mach_type = MACH_ADM5120_EASY83000, - .name = "Infineon EASY 83000 Reference Board", - .board_setup = easy_setup_pqfp, - .eth_num_ports = 6, - .num_devices = ARRAY_SIZE(easy83000_devices), - .devices = easy83000_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&easy5120pata_board); - adm5120_board_register(&easy5120rt_board); - adm5120_board_register(&easy5120wvoip_board); - adm5120_board_register(&easy83000_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c deleted file mode 100644 index f233772d0d..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/mikrotik.c +++ /dev/null @@ -1,172 +0,0 @@ -/* - * $Id$ - * - * Mikrotik RouterBOARDs 111/112/133/133C/150/153 - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static struct mtd_partition rb1xx_partitions[] = { - { - .name = "booter", - .offset = 0, - .size = 64*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "firmware", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *rb1xx_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_nand_device, -}; - -static struct platform_device *rb150_devices[] __initdata = { - &adm5120_flash0_device, - /* TODO: nand device is not yet supported */ -}; - -static void __init rb1xx_setup(void) -{ - /* setup data for flash0 device */ - adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions); - adm5120_flash0_data.parts = rb1xx_partitions; - - /* TODO: setup mac address */ -} - -#if 0 -/* - * RB1xx boards have bad network performance with the default VLAN matrixes. - * Disable it while the ethernet driver gets fixed. - */ -static unsigned char rb11x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static unsigned char rb133_vlans[6] __initdata = { - /* FIXME: untested */ - 0x44, 0x42, 0x41, 0x00, 0x00, 0x00 -}; - -static unsigned char rb133c_vlans[6] __initdata = { - /* FIXME: untested */ - 0x44, 0x00, 0x00, 0x00, 0x00, 0x00 -}; - -static unsigned char rb15x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 -}; -#else -static unsigned char rb_vlans[6] __initdata = { - 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 -}; -#define rb11x_vlans rb_vlans -#define rb133_vlans rb_vlans -#define rb133c_vlans rb_vlans -#define rb15x_vlans rb_vlans -#endif - -static struct adm5120_board rb111_board __initdata = { - .mach_type = MACH_ADM5120_RB_111, - .name = "Mikrotik RouterBOARD 111", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb11x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb112_board __initdata = { - .mach_type = MACH_ADM5120_RB_112, - .name = "Mikrotik RouterBOARD 112", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb11x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb133_board __initdata = { - .mach_type = MACH_ADM5120_RB_133, - .name = "Mikrotik RouterBOARD 133", - .board_setup = rb1xx_setup, - .eth_num_ports = 3, - .eth_vlans = rb133_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb133c_board __initdata = { - .mach_type = MACH_ADM5120_RB_133C, - .name = "Mikrotik RouterBOARD 133C", - .board_setup = rb1xx_setup, - .eth_num_ports = 1, - .eth_vlans = rb133c_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static struct adm5120_board rb150_board __initdata = { - .mach_type = MACH_ADM5120_RB_150, - .name = "Mikrotik RouterBOARD 150", - .board_setup = rb1xx_setup, - .eth_num_ports = 5, - .eth_vlans = rb15x_vlans, - .num_devices = ARRAY_SIZE(rb150_devices), - .devices = rb150_devices, -}; - -static struct adm5120_board rb153_board __initdata = { - .mach_type = MACH_ADM5120_RB_153, - .name = "Mikrotik RouterBOARD 153", - .board_setup = rb1xx_setup, - .eth_num_ports = 5, - .eth_vlans = rb15x_vlans, - .num_devices = ARRAY_SIZE(rb1xx_devices), - .devices = rb1xx_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&rb111_board); - adm5120_board_register(&rb112_board); - adm5120_board_register(&rb133_board); - adm5120_board_register(&rb133c_board); - adm5120_board_register(&rb150_board); - adm5120_board_register(&rb153_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c deleted file mode 100644 index 0a60205ebf..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/boards/zyxel.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * $Id$ - * - * ZyXEL Prestige P-334/P-335 boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include - -#include -#include - -static void switch_bank_gpio5(unsigned bank) -{ - switch (bank) { - case 0: - gpio_set_value(ADM5120_GPIO_PIN5, 0); - break; - case 1: - gpio_set_value(ADM5120_GPIO_PIN5, 1); - break; - } -} - -static struct mtd_partition p33x_partitions[] = { - { - .name = "bootbase", - .offset = 0, - .size = 16*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "rom", - .offset = MTDPART_OFS_APPEND, - .size = 16*1024, - } , { - .name = "bootext", - .offset = MTDPART_OFS_APPEND, - .size = 96*1024, - .mask_flags = MTD_WRITEABLE, - } , { - .name = "trx", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - } , { - .name = "firmware", - .offset = 32*1024, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct platform_device *p334_devices[] __initdata = { - &adm5120_flash0_device, -}; - -static struct platform_device *p335_devices[] __initdata = { - &adm5120_flash0_device, - &adm5120_usbc_device, -}; - -static void __init p33x_setup(void) -{ - gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ - gpio_direction_output(ADM5120_GPIO_PIN5, 0); - - /* setup data for flash0 device */ - adm5120_flash0_data.switch_bank = switch_bank_gpio5; - adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions); - adm5120_flash0_data.parts = p33x_partitions; - - /* TODO: setup mac address */ -} - -unsigned char p33x_vlans[6] __initdata = { - /* FIXME: untested */ - 0x50, 0x48, 0x44, 0x42, 0x41, 0x00 -}; - -static struct adm5120_board p334wt_board __initdata = { - .mach_type = MACH_ADM5120_P334WT, - .name = "ZyXEL Prestige 334WT", - .board_setup = p33x_setup, - .eth_num_ports = 5, - .eth_vlans = p33x_vlans, - .num_devices = ARRAY_SIZE(p334_devices), - .devices = p334_devices, -}; - -static struct adm5120_board p335_board __initdata = { - .mach_type = MACH_ADM5120_P335, - .name = "ZyXEL Prestige 335/335WT", - .board_setup = p33x_setup, - .eth_num_ports = 5, - .eth_vlans = p33x_vlans, - .num_devices = ARRAY_SIZE(p335_devices), - .devices = p335_devices, -}; - -static int __init register_boards(void) -{ - adm5120_board_register(&p334wt_board); - adm5120_board_register(&p335_board); - return 0; -} - -pure_initcall(register_boards); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c deleted file mode 100644 index 4a8b69b4cb..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/clock.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * $Id$ - * - * ADM5120 minimal CLK API implementation - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on the CLK API implementation in: - * arch/mips/tx4938/toshiba_rbtx4938/setup.c - * Copyright (C) 2000-2001 Toshiba Corporation - * 2003-2005 (c) MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include - -struct clk { - unsigned long rate; -}; - -static struct clk uart_clk = { - .rate = ADM5120_UART_CLOCK -}; - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "UARTCLK")) - return &uart_clk; - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c deleted file mode 100644 index d073b659ad..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/gpio.c +++ /dev/null @@ -1,356 +0,0 @@ -/* - * $Id$ - * - * ADM5120 GPIO support - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -typedef void __iomem * gpio_reg_t; -#define GPIO_READ(r) readl((r)) -#define GPIO_WRITE(v,r) writel((v),(r)) -#define GPIO_REG(r) (gpio_reg_t)(KSEG1ADDR(ADM5120_SWITCH_BASE)+r) - -struct adm5120_gpio_line { - u32 flags; - const char *label; -}; - -#define GPIO_FLAG_VALID 0x01 -#define GPIO_FLAG_USED 0x02 - -struct led_desc { - gpio_reg_t reg; /* LED register address */ - u8 iv_shift; /* shift amount for input bit */ - u8 mode_shift; /* shift amount for mode bits */ -}; - -#define LED_DESC(_port,_led) { \ - .reg = GPIO_REG(SWITCH_REG_PORT0_LED+_port*4), \ - .iv_shift = LED0_IV_SHIFT+_led, \ - .mode_shift = _led*4 \ - } - -static struct led_desc led_table[15] = { - LED_DESC(0, 0), LED_DESC(0, 1), LED_DESC(0, 2), - LED_DESC(1, 0), LED_DESC(1, 1), LED_DESC(1, 2), - LED_DESC(2, 0), LED_DESC(2, 1), LED_DESC(2, 2), - LED_DESC(3, 0), LED_DESC(3, 1), LED_DESC(3, 2), - LED_DESC(4, 0), LED_DESC(4, 1), LED_DESC(4, 2) -}; - -static struct adm5120_gpio_line adm5120_gpio_map[ADM5120_GPIO_COUNT] = { - [ADM5120_GPIO_PIN0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN3] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN4] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN5] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN6] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_PIN7] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P0L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P0L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P0L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P1L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P1L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P1L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P2L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P2L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P2L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P3L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P3L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P3L2] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P4L0] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P4L1] = {.flags = GPIO_FLAG_VALID}, - [ADM5120_GPIO_P4L2] = {.flags = GPIO_FLAG_VALID} -}; - -#define gpio_is_invalid(g) ( \ - (g) > ADM5120_GPIO_MAX || \ - ((adm5120_gpio_map[(g)].flags & GPIO_FLAG_VALID) == 0) \ - ) - -#define gpio_is_used(g) ((adm5120_gpio_map[(g)].flags & GPIO_FLAG_USED) != 0) - -/* - * Helpers for GPIO lines in GPIO_CONF0 register - */ -#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p) -#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p) -#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p) -#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p) - -static inline int pins_direction_input(unsigned pin) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - t &= ~(PIN_OE(pin)); - t |= PIN_IM(pin); - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int pins_direction_output(unsigned pin, int value) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - t &= ~(PIN_IM(pin) | PIN_OV(pin)); - t |= PIN_OE(pin); - - if (value) - t |= PIN_OV(pin); - - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int pins_get_value(unsigned pin) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - if ((t & PIN_IM(pin)) != 0) - t &= PIN_IV(pin); - else - t &= PIN_OV(pin); - - return (t) ? 1 : 0; -} - -static inline void pins_set_value(unsigned pin, int value) -{ - gpio_reg_t *reg; - u32 t; - - reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); - - t = GPIO_READ(reg); - if (value == 0) - t &= ~(PIN_OV(pin)); - else - t |= PIN_OV(pin); - - GPIO_WRITE(t,reg); -} - -/* - * Helpers for GPIO lines in PORTx_LED registers - */ -static inline int leds_direction_input(unsigned led) -{ - gpio_reg_t *reg; - u32 t; - - reg = led_table[led].reg; - t = GPIO_READ(reg); - t &= ~(LED_MODE_MASK << led_table[led].mode_shift); - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int leds_direction_output(unsigned led, int value) -{ - gpio_reg_t *reg; - u32 t, s; - - reg = led_table[led].reg; - s = led_table[led].mode_shift; - - t = GPIO_READ(reg); - t &= ~(LED_MODE_MASK << s); - - switch (value) { - case ADM5120_GPIO_LOW: - t |= (LED_MODE_OUT_LOW << s); - break; - case ADM5120_GPIO_FLASH: - case ADM5120_GPIO_LINK: - case ADM5120_GPIO_SPEED: - case ADM5120_GPIO_DUPLEX: - case ADM5120_GPIO_ACT: - case ADM5120_GPIO_COLL: - case ADM5120_GPIO_LINK_ACT: - case ADM5120_GPIO_DUPLEX_COLL: - case ADM5120_GPIO_10M_ACT: - case ADM5120_GPIO_100M_ACT: - t |= ((value & LED_MODE_MASK) << s); - break; - default: - t |= (LED_MODE_OUT_HIGH << s); - break; - } - - GPIO_WRITE(t,reg); - - return 0; -} - -static inline int leds_get_value(unsigned led) -{ - gpio_reg_t *reg; - u32 t, m; - - reg = led_table[led].reg; - - t = GPIO_READ(reg); - m = (t >> led_table[led].mode_shift) & LED_MODE_MASK; - if (m == LED_MODE_INPUT) - return (t >> led_table[led].iv_shift) & 1; - - if (m == LED_MODE_OUT_LOW) - return 0; - - return 1; -} - -/* - * Main GPIO support routines - */ -int adm5120_gpio_direction_input(unsigned gpio) -{ - if (gpio_is_invalid(gpio)) - return -EINVAL; - - if (gpio < ADM5120_GPIO_P0L0) - return pins_direction_input(gpio); - - gpio -= ADM5120_GPIO_P0L0; - return leds_direction_input(gpio); -} - -int adm5120_gpio_direction_output(unsigned gpio, int value) -{ - if (gpio_is_invalid(gpio)) - return -EINVAL; - - if (gpio < ADM5120_GPIO_P0L0) - return pins_direction_output(gpio, value); - - gpio -= ADM5120_GPIO_P0L0; - return leds_direction_output(gpio, value); -} - -int adm5120_gpio_get_value(unsigned gpio) -{ - if (gpio < ADM5120_GPIO_P0L0) - return pins_get_value(gpio); - - gpio -= ADM5120_GPIO_P0L0; - return leds_get_value(gpio); -} - -void adm5120_gpio_set_value(unsigned gpio, int value) -{ - if (gpio < ADM5120_GPIO_P0L0) { - pins_set_value(gpio, value); - return; - } - - gpio -= ADM5120_GPIO_P0L0; - leds_direction_output(gpio, value); -} - -int adm5120_gpio_request(unsigned gpio, const char *label) -{ - if (gpio_is_invalid(gpio)) - return -EINVAL; - - if (gpio_is_used(gpio)) - return -EBUSY; - - adm5120_gpio_map[gpio].flags |= GPIO_FLAG_USED; - adm5120_gpio_map[gpio].label = label; - - return 0; -} - -void adm5120_gpio_free(unsigned gpio) -{ - if (gpio_is_invalid(gpio)) - return; - - adm5120_gpio_map[gpio].flags &= ~GPIO_FLAG_USED; - adm5120_gpio_map[gpio].label = NULL; -} - -int adm5120_gpio_to_irq(unsigned gpio) -{ - /* FIXME: not yet implemented */ - return -EINVAL; -} - -int adm5120_irq_to_gpio(unsigned irq) -{ - /* FIXME: not yet implemented */ - return -EINVAL; -} - -static int __init adm5120_gpio_init(void) -{ - int i; - - if (adm5120_package_pqfp()) { - /* GPIO pins 4-7 are unavailable in ADM5120P */ - for (i=ADM5120_GPIO_PIN4; i<=ADM5120_GPIO_PIN7; i++) - adm5120_gpio_map[i].flags &= ~GPIO_FLAG_VALID; - } - - return 0; -} - -pure_initcall(adm5120_gpio_init); - -EXPORT_SYMBOL(adm5120_gpio_direction_output); -EXPORT_SYMBOL(adm5120_gpio_direction_input); -EXPORT_SYMBOL(adm5120_gpio_get_value); -EXPORT_SYMBOL(adm5120_gpio_set_value); -EXPORT_SYMBOL(adm5120_gpio_request); -EXPORT_SYMBOL(adm5120_gpio_free); -EXPORT_SYMBOL(adm5120_gpio_to_irq); -EXPORT_SYMBOL(adm5120_irq_to_gpio); diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c deleted file mode 100644 index 8d6fbe6a3c..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/irq.c +++ /dev/null @@ -1,203 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific interrupt handlers - * - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include - -#define INTC_REG(r) (*(volatile u32 *)(KSEG1ADDR(ADM5120_INTC_BASE) + r)) - -static void adm5120_intc_irq_unmask(unsigned int irq); -static void adm5120_intc_irq_mask(unsigned int irq); -static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type); - -static struct irq_chip adm5120_intc_irq_chip = { -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) - .name = "INTC", -#else - .typename = "INTC", -#endif - .unmask = adm5120_intc_irq_unmask, - .mask = adm5120_intc_irq_mask, - .mask_ack = adm5120_intc_irq_mask, - .set_type = adm5120_intc_irq_set_type -}; - -static struct irqaction adm5120_intc_irq_action = { - .handler = no_action, - .name = "cascade [INTC]" -}; - -static void adm5120_intc_irq_unmask(unsigned int irq) -{ - unsigned long flags; - - irq -= ADM5120_INTC_IRQ_BASE; - local_irq_save(flags); - INTC_REG(INTC_REG_IRQ_ENABLE) = (1 << irq); - local_irq_restore(flags); -} - -static void adm5120_intc_irq_mask(unsigned int irq) -{ - unsigned long flags; - - irq -= ADM5120_INTC_IRQ_BASE; - local_irq_save(flags); - INTC_REG(INTC_REG_IRQ_DISABLE) = (1 << irq); - local_irq_restore(flags); -} - -static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type) -{ - /* TODO: not yet tested */ -#if 1 - unsigned int sense; - unsigned long mode; - int err; - - err = 0; - sense = flow_type & (IRQ_TYPE_SENSE_MASK); - switch (sense) { - case IRQ_TYPE_NONE: - case IRQ_TYPE_LEVEL_HIGH: - break; - case IRQ_TYPE_LEVEL_LOW: - switch (irq) { - case ADM5120_IRQ_GPIO2: - case ADM5120_IRQ_GPIO4: - break; - default: - err = -EINVAL; - break; - } - break; - default: - err = -EINVAL; - break; - } - - if (err) - return err; - - switch (irq) { - case ADM5120_IRQ_GPIO2: - case ADM5120_IRQ_GPIO4: - mode = INTC_REG(INTC_REG_INT_MODE); - if (sense == IRQ_TYPE_LEVEL_LOW) - mode |= (1 << (irq-ADM5120_INTC_IRQ_BASE)); - else - mode &= (1 << (irq-ADM5120_INTC_IRQ_BASE)); - - INTC_REG(INTC_REG_INT_MODE) = mode; - /* fallthrogh */ - default: - irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; - irq_desc[irq].status |= sense; - break; - } -#endif - return 0; -} - -static void adm5120_intc_irq_dispatch(void) -{ - unsigned long status; - int irq; - -#if 1 - /* dispatch only one IRQ at a time */ - status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL; - - if (status) { - irq = ADM5120_INTC_IRQ_BASE+fls(status)-1; - do_IRQ(irq); - } else - spurious_interrupt(); -#else - status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL; - if (status) { - for (irq=ADM5120_INTC_IRQ_BASE; irq <= ADM5120_INTC_IRQ_BASE + - INTC_IRQ_LAST; irq++, status >>=1) { - if ((status & 1) == 1) - do_IRQ(irq); - } - } else - spurious_interrupt(); -#endif -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long pending; - - pending = read_c0_status() & read_c0_cause(); - - if (pending & STATUSF_IP7) - do_IRQ(ADM5120_IRQ_COUNTER); - else if (pending & STATUSF_IP2) - adm5120_intc_irq_dispatch(); - else - spurious_interrupt(); -} - -#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED) -static void __init adm5120_intc_irq_init(int base) -{ - int i; - - /* disable all interrupts */ - INTC_REG(INTC_REG_IRQ_DISABLE) = INTC_INT_ALL; - /* setup all interrupts to generate IRQ instead of FIQ */ - INTC_REG(INTC_REG_INT_MODE) = 0; - /* set active level for all external interrupts to HIGH */ - INTC_REG(INTC_REG_INT_LEVEL) = 0; - /* disable usage of the TEST_SOURCE register */ - INTC_REG(INTC_REG_IRQ_SOURCE_SELECT) = 0; - - for(i=ADM5120_INTC_IRQ_BASE; i <= ADM5120_INTC_IRQ_BASE+INTC_IRQ_LAST; - i++) { - irq_desc[i].status = INTC_IRQ_STATUS; - set_irq_chip_and_handler(i, &adm5120_intc_irq_chip, - handle_level_irq); - } - - setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action); -} - -void __init arch_init_irq(void) { - mips_cpu_irq_init(); - adm5120_intc_irq_init(ADM5120_INTC_IRQ_BASE); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c deleted file mode 100644 index 1bde6b02d5..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/memory.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include -#include - -#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) -#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) - -#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) -#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) - -#if 1 -# define mem_dbg(f, a...) printk("mem_detect: " f, ## a) -#else -# define mem_dbg(f, a...) -#endif - -#define MEM_WR_DELAY 10000 /* 0.01 usec */ - -unsigned long adm5120_memsize; - -static int __init mem_check_pattern(u8 *addr, unsigned long offs) -{ - volatile u32 *p1 = (volatile u32 *)addr; - volatile u32 *p2 = (volatile u32 *)(addr+offs); - u32 t,u,v; - - /* save original value */ - t = *p1; - u = *p2; - - if (t != u) - return 0; - - v = 0x55555555; - if (u == v) - v = 0xAAAAAAAA; - - mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1); - - *p1 = v; - mem_dbg("delay %d ns\n", MEM_WR_DELAY); - adm5120_ndelay(MEM_WR_DELAY); - u = *p2; - - mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u); - - /* restore original value */ - *p1 = t; - - return (v == u); -} - -static void __init adm5120_detect_memsize(void) -{ - u32 memctrl; - u32 size, maxsize; - u8 *p; - - memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL); - switch (memctrl & MEMCTRL_SDRS_MASK) { - case MEMCTRL_SDRS_4M: - maxsize = 4 << 20; - break; - case MEMCTRL_SDRS_8M: - maxsize = 8 << 20; - break; - case MEMCTRL_SDRS_16M: - maxsize = 16 << 20; - break; - default: - maxsize = 64 << 20; - break; - } - - /* disable buffers for both SDRAM banks */ - mem_dbg("disable buffers for both banks\n"); - MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE); - MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE); - - mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20); - - /* detect size of the 1st SDRAM bank */ - p = (u8 *)KSEG1ADDR(0); - for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) { - if (mem_check_pattern(p, size)) { - /* mirrored address */ - mem_dbg("mirrored data found at offset 0x%08X\n", size); - break; - } - } - - mem_dbg("chip size in 1st bank is %uMB\n", size >> 20); - adm5120_memsize = size; - - if (size != maxsize) - /* 2nd bank is not supported */ - goto out; - - if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0) - /* 2nd bank is disabled */ - goto out; - - /* - * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip - * are missing. - */ - mem_dbg("check presence of 2nd bank\n"); - - p = (u8 *)KSEG1ADDR(maxsize+size-4); - if (mem_check_pattern(p, 0)) { - adm5120_memsize += size; - } - - if (maxsize != size) { - /* adjusting MECTRL register */ - memctrl &= ~(MEMCTRL_SDRS_MASK); - switch (size>>20) { - case 4: - memctrl |= MEMCTRL_SDRS_4M; - break; - case 8: - memctrl |= MEMCTRL_SDRS_8M; - break; - case 16: - memctrl |= MEMCTRL_SDRS_16M; - break; - default: - memctrl |= MEMCTRL_SDRS_64M; - break; - } - SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl); - } - -out: - /* reenable buffer for both SDRAM banks */ - mem_dbg("enable buffers for both banks\n"); - MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE); - MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE); - - mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 , - size >>20); -} - -void __init adm5120_mem_init(void) -{ - adm5120_detect_memsize(); - add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c deleted file mode 100644 index a79893d540..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/platform.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * $Id$ - * - * Generic ADM5120 platform devices - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, - unsigned int mctrl); - -#if 1 -/* - * TODO:remove global adm5120_eth* variables when the switch driver will be - * converted into a real platform driver - */ -unsigned int adm5120_eth_num_ports = 6; -EXPORT_SYMBOL_GPL(adm5120_eth_num_ports); - -unsigned char adm5120_eth_macs[6][6] = { - {'\00', 'A', 'D', 'M', '\x51', '\x20' }, - {'\00', 'A', 'D', 'M', '\x51', '\x21' }, - {'\00', 'A', 'D', 'M', '\x51', '\x22' }, - {'\00', 'A', 'D', 'M', '\x51', '\x23' }, - {'\00', 'A', 'D', 'M', '\x51', '\x24' }, - {'\00', 'A', 'D', 'M', '\x51', '\x25' } -}; -EXPORT_SYMBOL_GPL(adm5120_eth_macs); - -unsigned char adm5120_eth_vlans[6] = { - 0x41, 0x42, 0x44, 0x48, 0x50, 0x60 -}; -EXPORT_SYMBOL_GPL(adm5120_eth_vlans); - -#else -/* Built-in ethernet switch */ -struct adm5120_switch_platform_data adm5120_switch_data; -struct platform_device adm5120_switch_device = { - .name = "adm5120-switch", - .id = -1, - .dev.platform_data = &adm5120_switch_data, -}; -#endif - -/* PCI Host Controller */ -struct adm5120_pci_platform_data adm5120_pci_data; -struct platform_device adm5120_pci_device = { - .name = "adm5120-pci", - .id = -1, - .dev.platform_data = &adm5120_pci_data, -}; - -/* USB Host Controller */ -struct resource adm5120_usbc_resources[] = { - [0] = { - .start = ADM5120_USBC_BASE, - .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = ADM5120_IRQ_USBC, - .end = ADM5120_IRQ_USBC, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device adm5120_usbc_device = { - .name = "adm5120-hcd", - .id = -1, - .num_resources = ARRAY_SIZE(adm5120_usbc_resources), - .resource = adm5120_usbc_resources, -}; - -/* NOR flash 0 */ -struct adm5120_flash_platform_data adm5120_flash0_data; -struct platform_device adm5120_flash0_device = { - .name = "adm5120-flash", - .id = 0, - .dev.platform_data = &adm5120_flash0_data, -}; - -/* NOR flash 1 */ -struct adm5120_flash_platform_data adm5120_flash1_data; -struct platform_device adm5120_flash1_device = { - .name = "adm5120-flash", - .id = 1, - .dev.platform_data = &adm5120_flash1_data, -}; - -/* NAND flash */ -struct resource adm5120_nand_resource[] = { - [0] = { - .start = ADM5120_SRAM1_BASE, - .end = ADM5120_SRAM1_BASE+ADM5120_MPMC_SIZE-1, - .flags = IORESOURCE_MEM, - }, -}; - -struct adm5120_nand_platform_data adm5120_nand_data; - -struct platform_device adm5120_nand_device = { - .name = "adm5120-nand", - .id = -1, - .dev.platform_data = &adm5120_nand_data, - .num_resources = ARRAY_SIZE(adm5120_nand_resource), - .resource = adm5120_nand_resource, -}; - -/* built-in UARTs */ -struct amba_pl010_data adm5120_uart0_data = { - .set_mctrl = adm5120_uart_set_mctrl -}; - -struct amba_device adm5120_uart0_device = { - .dev = { - .bus_id = "APB:UART0", - .platform_data = &adm5120_uart0_data, - }, - .res = { - .start = ADM5120_UART0_BASE, - .end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { ADM5120_IRQ_UART0, -1 }, - .periphid = 0x0041010, -}; - -struct amba_pl010_data adm5120_uart1_data = { - .set_mctrl = adm5120_uart_set_mctrl -}; - -struct amba_device adm5120_uart1_device = { - .dev = { - .bus_id = "APB:UART1", - .platform_data = &adm5120_uart1_data, - }, - .res = { - .start = ADM5120_UART1_BASE, - .end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - .irq = { ADM5120_IRQ_UART1, -1 }, - .periphid = 0x0041010, -}; - -static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, - unsigned int mctrl) -{ -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c deleted file mode 100644 index 2187477d02..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom.c +++ /dev/null @@ -1,276 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC; - -struct board_desc { - unsigned long mach_type; - char *name; -}; - -#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)} -static struct board_desc common_boards[] __initdata = { - /* Cellvision/SparkLAN boards */ - DEFBOARD("CAS-630", MACH_ADM5120_CAS630), - DEFBOARD("CAS-670", MACH_ADM5120_CAS670), - DEFBOARD("CAS-771", MACH_ADM5120_CAS771), - DEFBOARD("CAS-790", MACH_ADM5120_CAS790), - DEFBOARD("CAS-861", MACH_ADM5120_CAS861), - /* Compex boards */ - DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT), - /* Edimax boards */ - DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K), - DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104K), - /* Infineon boards */ - DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA), - DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT), - DEFBOARD("EASY 5120-WVoIP", MACH_ADM5120_EASY5120WVOIP), - DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000), - /* Mikrotik RouterBOARDs */ - DEFBOARD("111", MACH_ADM5120_RB_111), - DEFBOARD("112", MACH_ADM5120_RB_112), - DEFBOARD("133", MACH_ADM5120_RB_133), - DEFBOARD("133C", MACH_ADM5120_RB_133C), - DEFBOARD("133C3", MACH_ADM5120_RB_133C), - DEFBOARD("150", MACH_ADM5120_RB_153), /* it's intentional */ - DEFBOARD("153", MACH_ADM5120_RB_153), - DEFBOARD("miniROUTER", MACH_ADM5120_RB_150), -}; - -static unsigned long __init find_machtype_byname(char *name) -{ - unsigned long ret; - int i; - - ret = MACH_ADM5120_GENERIC; - if (name == NULL) - goto out; - - if (*name == '\0') - goto out; - - for (i=0; i 0) strcpy( &(arcs_cmdline[0]), cmd); - else strcpy(&(arcs_cmdline[0]), CONFIG_CMDLINE); - -} - -#define UART_READ(r) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)) -#define UART_WRITE(r,v) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))=(v) - -void __init prom_putchar(char ch) -{ - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); - UART_WRITE(UART_REG_DATA, ch); - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); -} - -void __init prom_init(void) -{ - mips_machgroup = MACH_GROUP_ADM5120; - prom_detect_machtype(); - - prom_init_cmdline(); -} - -void __init prom_free_prom_memory(void) -{ - /* We do not have to prom memory to free */ -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile deleted file mode 100644 index d844b600f3..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel -# - -lib-y += bootbase.o -lib-y += cfe.o -lib-y += generic.o -lib-y += myloader.o -lib-y += routerboot.o diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c deleted file mode 100644 index 7ab9d46bd6..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/bootbase.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * $Id$ - * - * ZyXEL's Bootbase specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include "prom_read.h" - -#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90) -#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000) -#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE) -#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024)) - -static int bootbase_found = 0; -static struct zynos_board_info *board_info; - -struct bootbase_info bootbase_info; - -static inline int bootbase_dbgarea_present(u8 *data) -{ - u32 t; - - t = prom_read_be32(data+5); - if (t != ZYNOS_MAGIC_DBGAREA1) - return 0; - - t = prom_read_be32(data+9); - if (t != ZYNOS_MAGIC_DBGAREA2) - return 0; - - return 1; -} - -static inline u32 bootbase_get_bootext_addr(void) -{ - return prom_read_be32(&board_info->bootext_addr); -} - -static inline u16 bootbase_get_vendor_id(void) -{ -#define CHECK_VENDOR(n) (strnicmp(board_info->vendor,(n),strlen(n)) == 0) - unsigned char vendor[ZYNOS_NAME_LEN]; - int i; - - for (i=0; ivendor[i]; - - if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL) - return ZYNOS_VENDOR_ID_ZYXEL; - - if CHECK_VENDOR(ZYNOS_VENDOR_DLINK) - return ZYNOS_VENDOR_ID_DLINK; - - if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT) - return ZYNOS_VENDOR_ID_LUCENT; - - if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR) - return ZYNOS_VENDOR_ID_NETGEAR; - - return ZYNOS_VENDOR_ID_OTHER; -} - -static inline u16 bootbase_get_board_id(void) -{ - return prom_read_be16(&board_info->board_id); -} - -int __init bootbase_present(void) -{ - u32 t; - - if (bootbase_found) - goto out; - - /* check presence of the dbgarea */ - if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0) - goto out; - - board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR); - - /* check for a valid BootExt address */ - t = bootbase_get_bootext_addr(); - if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX)) - goto out; - - bootbase_info.vendor_id = bootbase_get_vendor_id(); - bootbase_info.board_id = bootbase_get_board_id(); - - bootbase_found = 1; - -out: - return bootbase_found; -} - diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c deleted file mode 100644 index 6c03a4e859..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/cfe.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * $Id$ - * - * Broadcom's CFE specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include - -#include -#include - -#include -#include "prom_read.h" - -/* - * CFE based boards - */ -#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE -from other bootloaders */ - -static int cfe_found = 0; - -static u32 cfe_handle; -static u32 cfe_entry; -static u32 cfe_seal; - -int __init cfe_present(void) -{ - /* - * This method only works, when we are booted directly from the CFE. - */ - u32 a1 = (u32) fw_arg1; - - if (cfe_found) - return 1; - - cfe_handle = (u32) fw_arg0; - cfe_entry = (u32) fw_arg2; - cfe_seal = (u32) fw_arg3; - - /* Check for CFE by finding the CFE magic number */ - if (cfe_seal != CFE_EPTSEAL) { - /* We are not booted from CFE */ - return 0; - } - - /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */ - if (a1 != 0) { - return 0; - } - - /* The cfe_handle, and the cfe_entry must be kernel mode addresses */ - if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) { - return 0; - } - - cfe_found = 1; - return 1; -} - -char *cfe_getenv(char *envname) -{ - if (cfe_found == 0) - return NULL; - - return NULL; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c deleted file mode 100644 index 3b5c3bdc09..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/generic.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * $Id$ - * - * Generic PROM routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include - -#include - -#include - -static int *_prom_argc; -static char **_prom_argv; -static char **_prom_envp; - -char *generic_prom_getenv(char *envname) -{ - char **env; - char *ret; - - ret = NULL; - for (env = _prom_envp; *env != NULL; env++) { - if (strcmp(envname, *env++) == 0) { - ret = *env; - break; - } - } - - return ret; -} - -int generic_prom_present(void) -{ - _prom_argc = (int *)fw_arg0; - _prom_argv = (char **)fw_arg1; - _prom_envp = (char **)fw_arg2; - - return 1; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c deleted file mode 100644 index 8a44509a08..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/myloader.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * $Id$ - * - * Compex's MyLoader specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include "prom_read.h" - -#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000) -#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800) -#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000) - -static int myloader_found = 0; - -struct myloader_info myloader_info; - -int __init myloader_present(void) -{ - struct mylo_system_params *sysp; - struct mylo_board_params *boardp; - struct mylo_partition_table *parts; - - if (myloader_found) - goto out; - - sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR); - boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR); - parts = (struct mylo_partition_table *)(PART_TABLE_ADDR); - - /* Check for some magic numbers */ - if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) || - (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) || - (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS)) - goto out; - - myloader_info.vid = le32_to_cpu(sysp->vid); - myloader_info.did = le32_to_cpu(sysp->did); - myloader_info.svid = le32_to_cpu(sysp->svid); - myloader_info.sdid = le32_to_cpu(sysp->sdid); - - myloader_found = 1; - -out: - return myloader_found; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h deleted file mode 100644 index 06e6863fea..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/prom_read.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * $Id$ - * - * Generic prom definitions - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_PROM_H_ -#define _ADM5120_PROM_H_ - -/* - * Helper routines - */ -static inline u16 prom_read_le16(void *buf) -{ - u8 *p = buf; - - return ((u16)p[0] + ((u16)p[1] << 8)); -} - -static inline u32 prom_read_le32(void *buf) -{ - u8 *p = buf; - - return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) + - ((u32)p[3] << 24)); -} - -static inline u16 prom_read_be16(void *buf) -{ - u8 *p = buf; - - return (((u16)p[0] << 8) + (u16)p[1]); -} - -static inline u32 prom_read_be32(void *buf) -{ - u8 *p = buf; - - return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) + - ((u32)p[3])); -} - -#endif /* _ADM5120_PROM_H_ */ - - diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c deleted file mode 100644 index 7116f412f5..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/prom/routerboot.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * $Id$ - * - * Mikrotik's RouterBOOT specific prom routines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include "prom_read.h" - -static struct rb_hard_settings rb_hs; -static int rb_found = 0; - -static int __init routerboot_load_hs(u8 *buf, u16 buflen) -{ - u16 id,len; - u8 *mac; - int i,j; - - memset(&rb_hs, 0, sizeof(rb_hs)); - - if (buflen < 4) - return -1; - - if (prom_read_le32(buf) != RB_MAGIC_HARD) - return -1; - - /* skip magic value */ - buf += 4; - buflen -= 4; - - while (buflen > 2) { - id = prom_read_le16(buf); - buf += 2; - buflen -= 2; - if (id == RB_ID_TERMINATOR || buflen < 2) - break; - - len = prom_read_le16(buf); - buf += 2; - buflen -= 2; - - if (buflen < len) - break; - - switch (id) { - case RB_ID_BIOS_VERSION: - rb_hs.bios_ver = (char *)buf; - break; - case RB_ID_BOARD_NAME: - rb_hs.name = (char *)buf; - break; - case RB_ID_MEMORY_SIZE: - rb_hs.mem_size = prom_read_le32(buf); - break; - case RB_ID_MAC_ADDRESS_COUNT: - rb_hs.mac_count = prom_read_le32(buf); - break; - case RB_ID_MAC_ADDRESS_PACK: - rb_hs.mac_count = len/RB_MAC_SIZE; - if (rb_hs.mac_count > RB_MAX_MAC_COUNT) - rb_hs.mac_count = RB_MAX_MAC_COUNT; - mac = buf; - for (i=0; i < rb_hs.mac_count; i++) { - for (j=0; j < RB_MAC_SIZE; j++) - rb_hs.macs[i][j] = mac[j]; - mac += RB_MAC_SIZE; - } - break; - } - - buf += len; - buflen -= len; - - } - - return 0; -} - -#define RB_BS_OFFS 0x14 -#define RB_OFFS_MAX (128*1024) - -int __init routerboot_present(void) -{ - struct rb_bios_settings *bs; - u8 *base; - u32 off,len; - - if (rb_found) - goto out; - - base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE); - bs = (struct rb_bios_settings *)(base + RB_BS_OFFS); - - off = prom_read_le32(&bs->hs_offs); - len = prom_read_le32(&bs->hs_size); - if (off > RB_OFFS_MAX) - goto out; - - if (routerboot_load_hs(base+off, len) != 0) - goto out; - - rb_found = 1; - -out: - return rb_found; -} - -char *routerboot_get_boardname(void) -{ - if (rb_found == 0) - return NULL; - - return rb_hs.name; -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c deleted file mode 100644 index abcbb1c8b9..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/reset.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific reset routines - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include - -#include -#include - -#include -#include -#include - -#define ADM5120_SOFTRESET 0x12000004 - -void (*adm5120_board_reset)(void); - -void adm5120_restart(char *command) -{ - /* TODO: stop switch before reset */ - - if (adm5120_board_reset) - adm5120_board_reset(); - - *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1; -} - -void adm5120_halt(void) -{ - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); - while (1); -} - -void adm5120_power_off(void) -{ - adm5120_halt(); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c deleted file mode 100644 index ed7966b41a..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/setup.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific setup - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -static char *prom_names[ADM5120_PROM_LAST+1] __initdata = { - [ADM5120_PROM_GENERIC] = "Generic", - [ADM5120_PROM_CFE] = "CFE", - [ADM5120_PROM_UBOOT] = "U-Boot", - [ADM5120_PROM_MYLOADER] = "MyLoader", - [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT", - [ADM5120_PROM_BOOTBASE] = "Bootbase" -}; - -static void __init adm5120_report(void) -{ - printk(KERN_INFO "SoC : ADM%04X%s revision %d, running at %ldMHz\n", - adm5120_product_code, - (adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P", - adm5120_revision, (adm5120_speed / 1000000) - ); - printk(KERN_INFO "Bootdev : %s flash\n", adm5120_nand_boot ? "NAND":"NOR"); - printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]); -} - -void __init plat_mem_setup(void) -{ - adm5120_soc_init(); - adm5120_mem_init(); - adm5120_report(); - - board_time_init = adm5120_time_init; - - _machine_restart = adm5120_restart; - _machine_halt = adm5120_halt; - pm_power_off = adm5120_power_off; - - set_io_port_base(KSEG1); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c deleted file mode 100644 index 27393d4fe2..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/time.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific hooks for MIPS CPU Counter/Compare timer - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on: arch/mips/gt64120/wrppmc/time.c - * Original author: Mark.Zhan - * Copyright (C) 1996, 1997, 2004 by Ralf Baechle - * Copyright (C) 2006, Wind River System Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -void __init adm5120_time_init(void) -{ - mips_hpt_frequency = adm5120_speed / 2; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - clear_c0_status(ST0_BEV); - - /* Install ISR for CPU Counter interrupt */ - setup_irq(ADM5120_IRQ_COUNTER, irq); -} diff --git a/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c b/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c deleted file mode 100644 index 941f306950..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/adm5120/trxsplit.c +++ /dev/null @@ -1,208 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#define PFX "trxsplit: " - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_VERSION 1 -#define TRX_MAX_LEN 0x3A0000 -#define TRX_NO_HEADER 1 /* Do not write TRX header */ -#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ -#define TRX_MAX_OFFSET 3 -#define TRX_MIN_KERNEL_SIZE 256*1024 - -struct trx_header { - u32 magic; /* "HDR0" */ - u32 len; /* Length of file including header */ - u32 crc32; /* 32-bit CRC from flag_version to end of file */ - u32 flag_version; /* 0:15 flags, 16:31 version */ - u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -}; - -#define BLOCK_LEN_MIN 0x10000 - -static struct mtd_info *trx_mtd = NULL; -static unsigned long trx_offset = 0; -static int trx_nr_parts = 0; -static struct mtd_partition trx_parts[TRX_MAX_OFFSET]; -static struct trx_header trx_hdr; - -static int __init trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset) -{ - size_t retlen; - int err; - - err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr); - if (err) { - printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name); - goto err_out; - } - - if (retlen != sizeof(trx_hdr)) { - printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name); - goto err_out; - } - - trx_hdr.magic = le32_to_cpu(trx_hdr.magic); - trx_hdr.len = le32_to_cpu(trx_hdr.len); - trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32); - trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version); - trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]); - trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]); - trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]); - - /* sanity checks */ - if (trx_hdr.magic != TRX_MAGIC) - goto err_out; - - if (trx_hdr.len > mtd->size - offset) - goto err_out; - - /* TODO: add crc32 checking too? */ - - return 0; - -err_out: - return -1; -} - -static int __init trxsplit_create_partitions(void) -{ - struct mtd_partition *part = trx_parts; - int ret = 0; - int i; - - if (trx_mtd == NULL) - goto out; - - printk(KERN_INFO PFX "creating TRX partitions in '%s' (%d,%d)\n", - trx_mtd->name, MTD_BLOCK_MAJOR, trx_mtd->index); - - for (i=0; ioffset = trx_offset + trx_hdr.offsets[i]; - trx_nr_parts++; - } - - for (i=0; isize - trx_parts[i].offset; - - i=0; - part = &trx_parts[i]; - if (part->size < TRX_MIN_KERNEL_SIZE) { - part->name = "loader"; - i++; - } - - part = &trx_parts[i]; - part->name = "kernel"; - i++; - - part = &trx_parts[i]; - part->name = "rootfs"; - - ret = add_mtd_partitions(trx_mtd, trx_parts, trx_nr_parts); - if (ret) { - printk(KERN_ALERT PFX "creating TRX partitions failed\n"); - } - -out: - return ret; -} - -static void __init trxsplit_add_mtd(struct mtd_info *mtd) -{ - unsigned long offset; - unsigned long blocklen; - int err; - - if (trx_mtd) - return; - - blocklen = mtd->erasesize; - if (blocklen < BLOCK_LEN_MIN) - blocklen = BLOCK_LEN_MIN; - - printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name); - - err = 0; - for (offset=0; offset < mtd->size; offset+=blocklen) { - err = trxsplit_checktrx(mtd, offset); - if (err == 0) - break; - } - - if (err) { - printk(KERN_ALERT PFX "no TRX header found\n"); - return; - } - - printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset); - - trx_mtd = mtd; - trx_offset = offset; -} - -static void __init trxsplit_remove_mtd(struct mtd_info *mtd) -{ - /* nothing to do */ -} - -static struct mtd_notifier trxsplit_notifier __initdata = { - .add = trxsplit_add_mtd, - .remove = trxsplit_remove_mtd, -}; - -static void __init trxsplit_find_trx(void) -{ - register_mtd_user(&trxsplit_notifier); - unregister_mtd_user(&trxsplit_notifier); -} - -static int __init trxsplit_init(void) -{ - int ret; - - trxsplit_find_trx(); - - ret = trxsplit_create_partitions(); - return ret; -} - -late_initcall(trxsplit_init); diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c deleted file mode 100644 index 59acf75c18..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/pci/fixup-adm5120.c +++ /dev/null @@ -1,175 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific PCI fixups - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -struct adm5120_pci_irq { - u8 slot; - u8 func; - u8 pin; - unsigned irq; -}; - -#define PCIIRQ(s,f,p,i) { \ - .slot = (s), \ - .func = (f), \ - .pin = (p), \ - .irq = (i) \ - } - -static struct adm5120_pci_irq default_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), -}; - -static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { - PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) -}; - -static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1), - PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) -}; - -static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = { - PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0), - PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1), - PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) -}; - -#define GETMAP(n) do { \ - nr_irqs = ARRAY_SIZE(n ## _pci_irqs); \ - p = n ## _pci_irqs; \ - } while (0) - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - struct adm5120_pci_irq *p; - int nr_irqs; - int i; - int irq; - - irq = -1; - if (slot < 1 || slot > 3) { - printk(KERN_ALERT "PCI: slot number %u is not supported\n", - slot); - goto out; - } - - GETMAP(default); - - switch (mips_machtype) { - case MACH_ADM5120_RB_111: - case MACH_ADM5120_RB_112: - case MACH_ADM5120_RB_133: - case MACH_ADM5120_RB_133C: - case MACH_ADM5120_RB_153: - GETMAP(rb1xx); - break; - case MACH_ADM5120_NP28G: - GETMAP(np28g); - break; - case MACH_ADM5120_P335: - case MACH_ADM5120_P334WT: - /* using default mapping */ - break; - case MACH_ADM5120_CAS771: - GETMAP(cas771); - break; - - case MACH_ADM5120_NP27G: - case MACH_ADM5120_NP28GHS: - case MACH_ADM5120_WP54AG: - case MACH_ADM5120_WP54G: - case MACH_ADM5120_WP54G_WRT: - case MACH_ADM5120_WPP54AG: - case MACH_ADM5120_WPP54G: - default: - printk(KERN_ALERT "PCI: irq map is unknown, using defaults.\n"); - break; - } - - for (i=0; islot == slot) && (PCI_FUNC(dev->devfn) == p->func) && - (p->pin == pin)) { - irq = p->irq; - break; - } - } - - if (irq < 0) { - printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n", - pci_name(dev), pin); - } else { - printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n", - pci_name(dev), pin, irq); - } - -out: - return irq; -} - -static void adm5120_pci_fixup(struct pci_dev *dev) -{ - if (dev->devfn != 0) - return; - - /* setup COMMAND register */ - pci_write_config_word(dev, PCI_COMMAND, - (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER)); - - /* setup CACHE_LINE_SIZE register */ - pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); - - /* setting up BARS */ - pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); - pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); -} - -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120, - adm5120_pci_fixup); - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} - diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c deleted file mode 100644 index 4a9bc999c9..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/pci/ops-adm5120.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific PCI operations - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include - -#include - -#define DEBUG 0 -#if DEBUG -#define DBG(f, ...) printk(f, ## __VA_ARGS__ ) -#else -#define DBG(f, ...) -#endif - -#define PCI_ENABLE 0x80000000 - -static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED; - -static inline void write_cfgaddr(u32 addr) -{ - *(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR) = (addr | PCI_ENABLE); -} - -static inline void write_cfgdata(u32 data) -{ - *(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA) = data; - -} - -static inline u32 read_cfgdata(void) -{ - return (*(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA)); -} - -static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where) -{ - return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \ - (where & 0xFC)); -} - -static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 *val) -{ - unsigned long flags; - u32 data; - - spin_lock_irqsave(&pci_lock, flags); - write_cfgaddr(mkaddr(bus,devfn,where)); - data = read_cfgdata(); - - DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data); - - switch (size) { - case 1: - if (where & 1) - data >>= 8; - if (where & 2) - data >>= 16; - data &= 0xFF; - break; - case 2: - if (where & 2) - data >>= 16; - data &= 0xFFFF; - break; - } - - *val = data; - DBG(", 0x%08X returned\n", data); - spin_unlock_irqrestore(&pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, - int size, u32 val) -{ - unsigned long flags; - u32 data; - int s; - - spin_lock_irqsave(&pci_lock, flags); - write_cfgaddr(mkaddr(bus,devfn,where)); - data = read_cfgdata(); - - DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", - bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data); - - switch (size) { - case 1: - s = ((where & 3) << 3); - data &= ~(0xFF << s); - data |= ((val & 0xFF) << s); - break; - case 2: - s = ((where & 2) << 4); - data &= ~(0xFFFF << s); - data |= ((val & 0xFFFF) << s); - break; - case 4: - data = val; - break; - } - - write_cfgdata(data); - DBG(", 0x%08X written\n", data); - spin_unlock_irqrestore(&pci_lock, flags); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops adm5120_pci_ops = { - .read = pci_config_read, - .write = pci_config_write, -}; diff --git a/target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c deleted file mode 100644 index 2a64770234..0000000000 --- a/target/linux/adm5120-2.6/files/arch/mips/pci/pci-adm5120.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * $Id$ - * - * ADM5120 PCI Host Controller driver - * - * Copyright (C) ADMtek Incorporated. - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * Copyright (C) 2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ -#include -#include -#include -#include - -#include -#include -#include - -extern struct pci_ops adm5120_pci_ops; - -static struct resource pci_io_resource = { - .name = "ADM5120 PCI I/O", - .start = ADM5120_PCIIO_BASE, - .end = ADM5120_PCICFG_ADDR-1, - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .name = "ADM5120 PCI MEM", - .start = ADM5120_PCIMEM_BASE, - .end = ADM5120_PCIIO_BASE-1, - .flags = IORESOURCE_MEM -}; - -static struct pci_controller adm5120_controller = { - .pci_ops = &adm5120_pci_ops, - .io_resource = &pci_io_resource, - .mem_resource = &pci_mem_resource, -}; - -static int __init adm5120_pci_setup(void) -{ - int pci_bios; - - pci_bios = adm5120_has_pci(); - - printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no "); - if (pci_bios == 0) - return -1; - - /* Avoid ISA compat ranges. */ - PCIBIOS_MIN_IO = 0x00000000; - PCIBIOS_MIN_MEM = 0x00000000; - - /* Set I/O resource limits. */ - ioport_resource.end = 0x1fffffff; - iomem_resource.end = 0xffffffff; - - register_pci_controller(&adm5120_controller); - return 0; -} - -arch_initcall(adm5120_pci_setup); diff --git a/target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c b/target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c deleted file mode 100644 index 06189371d7..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/leds/leds-adm5120.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * $Id$ - * - * ADM5120 GPIO LED devices - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -#include - -#define NUM_LEDS_MAX 23 - -#define ADM5120_GPIO_xxxx 0x100 /* an unknown pin */ - -struct mach_data { - unsigned long machtype; - unsigned count; - struct gpio_led_platform_data *data; -}; - -struct adm5120_leddev { - struct platform_device pdev; - struct gpio_led_platform_data pdata; -}; - -static int led_count = 0; -static struct adm5120_leddev *led_devs[NUM_LEDS_MAX]; - -#define LED_ARRAY(n) \ -static struct gpio_led_platform_data \ -n ## _leds [] __initdata = - -#define LED_DATA(n,t,g,off,on) { \ - .name = (n), \ - .trigger = (t), \ - .gpio = (g), \ - .value_off = (off), \ - .value_on = (on) \ - } - -#define LED_STD(g,n,t) LED_DATA((n),(t),(g), 0, 1) -#define LED_INV(g,n,t) LED_DATA((n),(t),(g), 1, 0) - -/* - * Compex boards - */ -#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) -LED_ARRAY(np27g) { /* FIXME: untested */ - LED_STD(ADM5120_GPIO_xxxx, "lan1", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "lan2", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "lan3", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "lan4", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "wan_cond", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "wlan", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "wan_act", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "usb1", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "usb2", NULL ), - LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "diag", NULL ), -}; -#endif - -#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) -LED_ARRAY(np28g) { /* FIXME: untested */ - LED_STD(ADM5120_GPIO_xxxx, "lan1", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "lan2", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "lan3", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "wan", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "wlan", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "usb1", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "usb2", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "usb3", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "usb4", NULL ), - LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), - LED_STD(ADM5120_GPIO_xxxx, "diag", NULL ), -}; -#endif - -LED_ARRAY(wp54g) { - LED_INV(ADM5120_GPIO_PIN2, "diag", NULL ), - LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL ), - LED_INV(ADM5120_GPIO_PIN7, "wan", NULL ), - LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL ), - LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL ), -}; - -/* - * Edimax boards - */ -LED_ARRAY(br6104k) { - LED_STD(ADM5120_GPIO_PIN0, "power", NULL ), - LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL ), - LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL ), - LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL ), - LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL ), - LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL ), - LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL ), - LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL ), - LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL ), - LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL ), - LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL ), -}; - -/* - * Mikrotik boards - */ -#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) -LED_ARRAY(rb100) { /* FIXME: untested */ - LED_STD(ADM5120_GPIO_PIN6, "power", NULL ), - LED_STD(ADM5120_GPIO_PIN3, "user", NULL ), -}; -#endif - -LED_ARRAY(rb133) { - LED_STD(ADM5120_GPIO_PIN6, "power", NULL ), - LED_STD(ADM5120_GPIO_PIN5, "user", NULL ), -}; - -/* - * ZyXEL boards - */ -#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) -LED_ARRAY(p334) { /* FIXME: untested */ - LED_INV(ADM5120_GPIO_xxxx, "power", NULL ), - LED_INV(ADM5120_GPIO_xxxx, "lan1", NULL ), - LED_INV(ADM5120_GPIO_xxxx, "lan2", NULL ), - LED_INV(ADM5120_GPIO_xxxx, "lan3", NULL ), - LED_INV(ADM5120_GPIO_xxxx, "lan4", NULL ), - LED_INV(ADM5120_GPIO_xxxx, "wan", NULL ), -}; -#endif - -LED_ARRAY(p334wt) { - LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), - LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL ), - LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL ), - LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL ), - LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL ), - LED_INV(ADM5120_GPIO_P4L0, "wan", NULL ), - LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL ), - LED_INV(ADM5120_GPIO_P2L2, "otist", NULL ), - LED_INV(ADM5120_GPIO_P1L2, "hidden", NULL ), -}; - -#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) -LED_ARRAY(p335) { /* FIXME: untested */ - LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), - LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL ), - LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL ), - LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL ), - LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL ), - LED_INV(ADM5120_GPIO_P4L0, "wan", NULL ), - LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL ), - LED_INV(ADM5120_GPIO_P2L2, "otist", NULL ), - LED_INV(ADM5120_GPIO_xxxx, "usb", NULL ), -}; -#endif - -/* - * Generic board - */ -LED_ARRAY(generic) { -#if defined(CONFIG_LEDS_ADM5120_DIAG) - LED_STD(ADM5120_GPIO_PIN0, "gpio0", NULL ), - LED_STD(ADM5120_GPIO_PIN1, "gpio1", NULL ), - LED_STD(ADM5120_GPIO_PIN2, "gpio2", NULL ), - LED_STD(ADM5120_GPIO_PIN3, "gpio3", NULL ), - LED_STD(ADM5120_GPIO_PIN4, "gpio4", NULL ), - LED_STD(ADM5120_GPIO_PIN5, "gpio5", NULL ), - LED_STD(ADM5120_GPIO_PIN6, "gpio6", NULL ), - LED_STD(ADM5120_GPIO_PIN7, "gpio7", NULL ), - LED_STD(ADM5120_GPIO_P0L0, "port0led0", NULL ), - LED_STD(ADM5120_GPIO_P0L1, "port0led1", NULL ), - LED_STD(ADM5120_GPIO_P0L2, "port0led2", NULL ), - LED_STD(ADM5120_GPIO_P1L0, "port1led0", NULL ), - LED_STD(ADM5120_GPIO_P1L1, "port1led1", NULL ), - LED_STD(ADM5120_GPIO_P1L2, "port1led2", NULL ), - LED_STD(ADM5120_GPIO_P2L0, "port2led0", NULL ), - LED_STD(ADM5120_GPIO_P2L1, "port2led1", NULL ), - LED_STD(ADM5120_GPIO_P2L2, "port2led2", NULL ), - LED_STD(ADM5120_GPIO_P3L0, "port3led0", NULL ), - LED_STD(ADM5120_GPIO_P3L1, "port3led1", NULL ), - LED_STD(ADM5120_GPIO_P3L2, "port3led2", NULL ), - LED_STD(ADM5120_GPIO_P4L0, "port4led0", NULL ), - LED_STD(ADM5120_GPIO_P4L1, "port4led1", NULL ), - LED_STD(ADM5120_GPIO_P4L2, "port4led2", NULL ), -#endif -}; - -#define MACH_DATA(m, n) { \ - .machtype = (m), \ - .count = ARRAY_SIZE(n ## _leds), \ - .data = n ## _leds \ -} - -static struct mach_data machines[] __initdata = { - MACH_DATA(MACH_ADM5120_GENERIC, generic), - /* Compex */ - MACH_DATA(MACH_ADM5120_WP54AG, wp54g), - MACH_DATA(MACH_ADM5120_WP54G, wp54g), - MACH_DATA(MACH_ADM5120_WP54G_WRT, wp54g), - MACH_DATA(MACH_ADM5120_WPP54AG, wp54g), - MACH_DATA(MACH_ADM5120_WPP54G, wp54g), - /* Edimax */ - MACH_DATA(MACH_ADM5120_BR6104K, br6104k), - /* Mikrotik */ - MACH_DATA(MACH_ADM5120_RB_133, rb133), - MACH_DATA(MACH_ADM5120_RB_133C, rb133), - /* ZyXEL */ - MACH_DATA(MACH_ADM5120_P334WT, p334wt), -#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) - /* untested */ - MACH_DATA(MACH_ADM5120_P334, p334), - MACH_DATA(MACH_ADM5120_P335, p335), - MACH_DATA(MACH_ADM5120_RB_111, rb100), - MACH_DATA(MACH_ADM5120_RB_112, rb100), - MACH_DATA(MACH_ADM5120_NP27G, np27g), - MACH_DATA(MACH_ADM5120_NP28G, np28g), - MACH_DATA(MACH_ADM5120_NP28GHS, np28g), -#endif -}; - -static struct adm5120_leddev * __init -create_leddev(struct gpio_led_platform_data *data) -{ - struct adm5120_leddev *p; - - p = kzalloc(sizeof(*p), GFP_KERNEL); - if (p == NULL) - return NULL; - - memcpy(&p->pdata, data, sizeof(p->pdata)); - p->pdev.dev.platform_data = &p->pdata; - - return p; -} - -static void -destroy_leddev(struct adm5120_leddev *led) -{ - if (led) - kfree(led); -} - -static struct mach_data * __init -adm5120_leds_findmach(unsigned long machtype) -{ - struct mach_data *mach; - int i; - - mach = NULL; - for (i=0; icount; i++) { - led_devs[i] = create_leddev(&mach->data[i]); - if (led_devs[i] == NULL) { - ret = -ENOMEM; - goto err_destroy; - } - led_devs[i]->pdev.name = "gpio-led"; - led_devs[i]->pdev.id = i; - } - - for (i=0; i < mach->count; i++) { - ret = platform_device_register(&led_devs[i]->pdev); - if (ret) - goto err_unregister; - } - - led_count = mach->count; - return 0; - -err_unregister: - for (i--; i>=0; i--) - platform_device_unregister(&led_devs[i]->pdev); - -err_destroy: - for (i=0; ipdev); - destroy_leddev(led_devs[i]); - } -} - -module_init(adm5120_leds_init); -module_exit(adm5120_leds_exit); - -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION(DRV_DESC); -MODULE_LICENSE("GPL"); - diff --git a/target/linux/adm5120-2.6/files/drivers/leds/leds-gpio.c b/target/linux/adm5120-2.6/files/drivers/leds/leds-gpio.c deleted file mode 100755 index b1a1f1ce9a..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/leds/leds-gpio.c +++ /dev/null @@ -1,212 +0,0 @@ -/* - * $Id$ - * - * Driver for LEDs connected to GPIO lines - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was derived from: - * /drivers/led/leds-s3c24xx.c - * (c) 2006 Simtec Electronics, Ben Dooks - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include - -#include - -#include -#include - -#define DRV_NAME "gpio-led" -#define DRV_DESC "GPIO LEDs driver" - -struct gpio_led_device { - struct led_classdev cdev; - struct gpio_led_platform_data *pdata; -}; - -static inline struct gpio_led_device *pdev_to_led(struct platform_device *dev) -{ - return platform_get_drvdata(dev); -} - -static inline struct gpio_led_device *class_to_led(struct led_classdev *led_cdev) -{ - return container_of(led_cdev, struct gpio_led_device, cdev); -} - -static void gpio_led_set(struct led_classdev *led_cdev, - enum led_brightness brightness) -{ - struct gpio_led_device *led; - struct gpio_led_platform_data *pdata; - - led = class_to_led(led_cdev); - pdata = led->pdata; - - switch (brightness) { - case LED_FULL: - gpio_direction_output(pdata->gpio, pdata->value_on); - break; - case LED_OFF: - gpio_direction_output(pdata->gpio, pdata->value_off); - break; - default: - gpio_direction_output(pdata->gpio, brightness); - break; - } -} - -static int __devinit gpio_led_probe(struct platform_device *dev) -{ - struct gpio_led_platform_data *pdata; - struct gpio_led_device *led; - int ret; - - pdata = dev->dev.platform_data; - if (pdata == NULL) { - dev_err(&dev->dev, "no platform data, id=%d\n", dev->id); - ret = -EINVAL; - goto err; - } - - if (pdata->name == NULL) { - dev_err(&dev->dev, "no led name specified\n"); - ret = -EINVAL; - goto err; - } - - ret = gpio_request(pdata->gpio, pdata->name); - if (ret) { - dev_err(&dev->dev, "gpio_request failed\n"); - goto err; - } - - led = kzalloc(sizeof(*led), GFP_KERNEL); - if (led == NULL) { - dev_err(&dev->dev, "no memory for device"); - ret = -ENOMEM; - goto err_free_gpio; - } - - platform_set_drvdata(dev, led); - led->pdata = pdata; - led->cdev.name = pdata->name; - led->cdev.brightness_set = gpio_led_set; -#ifdef CONFIG_LEDS_TRIGGERS - led->cdev.default_trigger = pdata->trigger; -#endif - - ret = led_classdev_register(&dev->dev, &led->cdev); - if (ret < 0) { - dev_err(&dev->dev, "led_classdev_register failed"); - goto err_free_led; - } - - return 0; - -err_free_led: - kfree(led); -err_free_gpio: - gpio_free(pdata->gpio); -err: - return ret; -} - -static int __devexit gpio_led_remove(struct platform_device *dev) -{ - struct gpio_led_device *led; - struct gpio_led_platform_data *pdata; - - pdata = dev->dev.platform_data; - - led = pdev_to_led(dev); - led_classdev_unregister(&led->cdev); - kfree(led); - - gpio_free(pdata->gpio); - - return 0; -} - -#ifdef CONFIG_PM -static int gpio_led_suspend(struct platform_device *dev, - pm_message_t state) -{ - struct gpio_led_device *led; - - led = pdev_to_led(dev); - led_classdev_suspend(&led->cdev); - - return 0; -} - -static int gpio_led_resume(struct platform_device *dev) -{ - struct gpio_led_device *led; - - led = pdev_to_led(dev); - led_classdev_resume(&led->cdev); - - return 0; -} -#endif /* CONFIG_PM */ - -static struct platform_driver gpio_led_driver = { - .probe = gpio_led_probe, - .remove = __devexit_p(gpio_led_remove), -#ifdef CONFIG_PM - .suspend = gpio_led_suspend, - .resume = gpio_led_resume, -#endif - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - }, -}; - -static int __init gpio_led_init(void) -{ - int ret; - - ret = platform_driver_register(&gpio_led_driver); - if (ret) - printk(KERN_ALERT DRV_DESC " register failed\n"); - else - printk(KERN_INFO DRV_DESC " registered\n"); - - return ret; -} - -static void __exit gpio_led_exit(void) -{ - platform_driver_unregister(&gpio_led_driver); -} - -module_init(gpio_led_init); -module_exit(gpio_led_exit); - -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION(DRV_DESC); -MODULE_LICENSE("GPL"); diff --git a/target/linux/adm5120-2.6/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120-2.6/files/drivers/mtd/maps/adm5120-flash.c deleted file mode 100644 index 0a2590e609..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/mtd/maps/adm5120-flash.c +++ /dev/null @@ -1,574 +0,0 @@ -/* - * $Id$ - * - * Platform driver for NOR flash devices on ADM5120 based boards - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was derived from: drivers/mtd/map/physmap.c - * Copyright (C) 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include - -#define DRV_NAME "adm5120-flash" -#define DRV_DESC "ADM5120 flash MAP driver" -#define MAX_PARSED_PARTS 8 - -#ifdef ADM5120_FLASH_DEBUG -#define MAP_DBG(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a) -#else -#define MAP_DBG(m, f, a...) do {} while (0) -#endif -#define MAP_ERR(m, f, a...) printk(KERN_ERR "%s: " f, (m->name) , ## a) -#define MAP_INFO(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a) - -struct adm5120_map_info { - struct map_info map; - void (*switch_bank)(unsigned); - unsigned long window_size; -}; - -struct adm5120_flash_info { - struct mtd_info *mtd; - struct resource *res; - struct platform_device *dev; - struct adm5120_map_info amap; -#ifdef CONFIG_MTD_PARTITIONS - int nr_parts; - struct mtd_partition *parts[MAX_PARSED_PARTS]; -#endif -}; - -struct flash_desc { - u32 phys; - u32 srs_shift; - u32 mpmc_reg; -}; - -/* - * Globals - */ -static DEFINE_SPINLOCK(adm5120_flash_spin); -#define FLASH_LOCK() spin_lock(&adm5120_flash_spin) -#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin) - -static u32 flash_bankwidths[4] = { 1, 2, 4, 0 }; - -static u32 flash_sizes[8] = { - 0, 512*1024, 1024*1024, 2*1024*1024, - 4*1024*1024, 0, 0, 0 -}; - -static struct flash_desc flash_descs[2] = { - { - .phys = ADM5120_SRAM0_BASE, - .mpmc_reg = MPMC_REG_SC1, - .srs_shift = MEMCTRL_SRS0_SHIFT, - }, { - .phys = ADM5120_SRAM1_BASE, - .mpmc_reg = MPMC_REG_SC0, - .srs_shift = MEMCTRL_SRS1_SHIFT, - } -}; - -static const char *probe_types[] = { - "cfi_probe", - "jedec_probe", - "map_rom", - NULL -}; - -#ifdef CONFIG_MTD_PARTITIONS -static const char *parse_types[] = { - "cmdlinepart", -#ifdef CONFIG_MTD_REDBOOT_PARTS - "RedBoot", -#endif -#ifdef CONFIG_MTD_MYLOADER_PARTS - "MyLoader", -#endif -}; -#endif - -#define BANK_SIZE (2<<20) -#define BANK_SIZE_MAX (4<<20) -#define BANK_OFFS_MASK (BANK_SIZE-1) -#define BANK_START_MASK (~BANK_OFFS_MASK) - -static inline struct adm5120_map_info *map_to_amap(struct map_info *map) -{ - return (struct adm5120_map_info *)map; -} - -static void adm5120_flash_switchbank(struct map_info *map, - unsigned long ofs) -{ - struct adm5120_map_info *amap = map_to_amap(map); - unsigned bank; - - if (amap->switch_bank == NULL) - return; - - bank = (ofs & BANK_START_MASK) >> 21; - if (bank > 1) - BUG(); - - MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs); - amap->switch_bank(bank); -} - -static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs) -{ - struct adm5120_map_info *amap = map_to_amap(map); - map_word ret; - - MAP_DBG(map, "reading from ofs %lX\n", ofs); - - if (ofs >= amap->window_size) - return map_word_ff(map); - - FLASH_LOCK(); - adm5120_flash_switchbank(map, ofs); - ret = inline_map_read(map, (ofs & (amap->window_size-1))); - FLASH_UNLOCK(); - - return ret; -} - -static void adm5120_flash_write(struct map_info *map, const map_word datum, - unsigned long ofs) -{ - struct adm5120_map_info *amap = map_to_amap(map); - - MAP_DBG(map,"writing to ofs %lX\n", ofs); - - if (ofs > amap->window_size) - return; - - FLASH_LOCK(); - adm5120_flash_switchbank(map, ofs); - inline_map_write(map, datum, (ofs & (amap->window_size-1))); - FLASH_UNLOCK(); -} - -static void adm5120_flash_copy_from(struct map_info *map, void *to, - unsigned long from, ssize_t len) -{ - struct adm5120_map_info *amap = map_to_amap(map); - char *p; - ssize_t t; - - MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n", - (unsigned long)to, from, (unsigned long)len); - - if (from > amap->window_size) - return; - - p = (char *)to; - while (len > 0) { - t = len; - if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE)) - t = BANK_SIZE-from; - - FLASH_LOCK(); - MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n", - (unsigned long)t, (from & (amap->window_size-1)), - (unsigned long)p); - adm5120_flash_switchbank(map, from); - inline_map_copy_from(map, p, (from & (amap->window_size-1)), t); - FLASH_UNLOCK(); - p += t; - from += t; - len -= t; - } -} - -static int adm5120_flash_initres(struct adm5120_flash_info *info) -{ - struct map_info *map = &info->amap.map; - int err = 0; - - info->res = request_mem_region(map->phys, map->size, map->name); - if (info->res == NULL) { - MAP_ERR(map, "could not reserve memory region\n"); - err = -ENOMEM; - goto out; - } - - map->virt = ioremap_nocache(map->phys, map->size); - if (map->virt == NULL) { - MAP_ERR(map, "failed to ioremap flash region\n"); - err = -ENOMEM; - goto out; - } - -out: - return err; -} - -#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) -#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) -#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r)) -#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))=(v) - -static int adm5120_flash_initinfo(struct adm5120_flash_info *info, - struct platform_device *dev) -{ - struct map_info *map = &info->amap.map; - struct adm5120_flash_platform_data *pdata = dev->dev.platform_data; - struct flash_desc *fdesc; - u32 t; - - map->name = dev->dev.bus_id; - - if (dev->id > 1) { - MAP_ERR(map, "invalid flash id\n"); - goto err_out; - } - - fdesc = &flash_descs[dev->id]; - - /* get memory window size */ - t = SWITCH_READ(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift; - t &= MEMCTRL_SRS_MASK; - info->amap.window_size = flash_sizes[t]; - if (info->amap.window_size == 0) { - MAP_ERR(map, "invalid flash size detected\n"); - goto err_out; - } - - /* get flash bus width */ - t = MPMC_READ(fdesc->mpmc_reg) & SC_MW_MASK; - map->bankwidth = flash_bankwidths[t]; - if (map->bankwidth == 0) { - MAP_ERR(map, "invalid bus width detected\n"); - goto err_out; - } - - map->phys = fdesc->phys; - map->size = BANK_SIZE_MAX; - - simple_map_init(map); - map->read = adm5120_flash_read; - map->write = adm5120_flash_write; - map->copy_from = adm5120_flash_copy_from; - - if (pdata) { - map->set_vpp = pdata->set_vpp; - info->amap.switch_bank = pdata->switch_bank; - } - - info->dev = dev; - - MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n", - (unsigned long)map->phys, - (unsigned long)info->amap.window_size >> 10, - map->bankwidth*8); - - return 0; - -err_out: - return -ENODEV; -} - -static void adm5120_flash_initbanks(struct adm5120_flash_info *info) -{ - struct map_info *map = &info->amap.map; - - if (info->mtd->size <= BANK_SIZE) - /* no bank switching needed */ - return; - - if (info->amap.switch_bank) { - info->amap.window_size = info->mtd->size; - return; - } - - MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n", - (unsigned long)map->size >> 10, - (unsigned long)info->mtd->size >> 10); - - info->mtd->size = info->amap.window_size; -} - -#ifdef CONFIG_MTD_PARTITIONS -static int adm5120_flash_initparts(struct adm5120_flash_info *info) -{ - struct adm5120_flash_platform_data *pdata = info->dev->dev.platform_data; - struct map_info *map = &info->amap.map; - int num_parsers; - const char *parser[2]; - int err = 0; - int nr_parts; - int i; - - info->nr_parts = 0; - - if (pdata == NULL) - goto out; - - if (pdata->nr_parts) { - MAP_INFO(map, "adding static partitions\n"); - err = add_mtd_partitions(info->mtd, pdata->parts, - pdata->nr_parts); - if (err == 0) { - info->nr_parts += pdata->nr_parts; - goto out; - } - } - - num_parsers = ARRAY_SIZE(parse_types); - if (num_parsers > MAX_PARSED_PARTS) - num_parsers = MAX_PARSED_PARTS; - - parser[1] = NULL; - for (i=0; imtd, parser, - &info->parts[i], 0); - - if (nr_parts <= 0) - continue; - - MAP_INFO(map, "adding \"%s\" partitions\n", - parser[0]); - - err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts); - if (err) - break; - - info->nr_parts += nr_parts; - } -out: - return err; -} -#else -static int adm5120_flash_initparts(struct adm5120_flash_info *info) -{ - return 0; -} -#endif /* CONFIG_MTD_PARTITIONS */ - -#ifdef CONFIG_MTD_PARTITIONS -static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info) -{ - int i; - - if (info->nr_parts) { - del_mtd_partitions(info->mtd); - for (i=0; iparts[i] != NULL) - kfree(info->parts[i]); - } else { - del_mtd_device(info->mtd); - } -} -#else -static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info) -{ - del_mtd_device(info->mtd); -} -#endif - -static int adm5120_flash_remove(struct platform_device *dev) -{ - struct adm5120_flash_info *info; - - info = platform_get_drvdata(dev); - if (info == NULL) - return 0; - - platform_set_drvdata(dev, NULL); - - if (info->mtd != NULL) { - adm5120_flash_remove_mtd(info); - map_destroy(info->mtd); - } - - if (info->amap.map.virt != NULL) - iounmap(info->amap.map.virt); - - if (info->res != NULL) { - release_resource(info->res); - kfree(info->res); - } - - return 0; -} - -static int adm5120_flash_probe(struct platform_device *dev) -{ - struct adm5120_flash_info *info; - struct map_info *map; - const char **probe_type; - int err; - - info = kzalloc(sizeof(*info), GFP_KERNEL); - if (info == NULL) { - err = -ENOMEM; - goto err_out; - } - - platform_set_drvdata(dev, info); - - err = adm5120_flash_initinfo(info, dev); - if (err) - goto err_out; - - err = adm5120_flash_initres(info); - if (err) - goto err_out; - - map = &info->amap.map; - for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL; - probe_type++) - info->mtd = do_map_probe(*probe_type, map); - - if (info->mtd == NULL) { - MAP_ERR(map, "map_probe failed\n"); - err = -ENXIO; - goto err_out; - } - - adm5120_flash_initbanks(info); - - if (info->mtd->size < info->amap.window_size) { - /* readjust resources */ - iounmap(map->virt); - release_resource(info->res); - kfree(info->res); - - info->amap.window_size = info->mtd->size; - map->size = info->mtd->size; - MAP_INFO(map, "reducing map size to %ldKiB\n", - (unsigned long)map->size >> 10); - err = adm5120_flash_initres(info); - if (err) - goto err_out; - } - - MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n", - (unsigned long)map->phys, (unsigned long)info->mtd->size >> 10, - map->bankwidth*8); - - info->mtd->owner = THIS_MODULE; - - err = adm5120_flash_initparts(info); - if (err) - goto err_out; - - if (info->nr_parts == 0) { - MAP_INFO(map, "no partitions available, registering whole flash\n"); - add_mtd_device(info->mtd); - } - - return 0; - -err_out: - adm5120_flash_remove(dev); - return err; -} - -#ifdef CONFIG_PM -static int adm5120_flash_suspend(struct platform_device *dev, pm_message_t state) -{ - struct adm5120_flash_info *info = platform_get_drvdata(dev); - int ret = 0; - - if (info) - ret = info->mtd->suspend(info->mtd); - - return ret; -} - -static int adm5120_flash_resume(struct platform_device *dev) -{ - struct adm5120_flash_info *info = platform_get_drvdata(dev); - - if (info) - info->mtd->resume(info->mtd); - - return 0; -} - -static void adm5120_flash_shutdown(struct platform_device *dev) -{ - struct adm5120_flash_info *info = platform_get_drvdata(dev); - - if (info && info->mtd->suspend(info->mtd) == 0) - info->mtd->resume(info->mtd); -} -#endif - -static struct platform_driver adm5120_flash_driver = { - .probe = adm5120_flash_probe, - .remove = adm5120_flash_remove, -#ifdef CONFIG_PM - .suspend = adm5120_flash_suspend, - .resume = adm5120_flash_resume, - .shutdown = adm5120_flash_shutdown, -#endif - .driver = { - .name = DRV_NAME, - }, -}; - -static int __init adm5120_flash_init(void) -{ - int err; - - err = platform_driver_register(&adm5120_flash_driver); - - return err; -} - -static void __exit adm5120_flash_exit(void) -{ - platform_driver_unregister(&adm5120_flash_driver); -} - -module_init(adm5120_flash_init); -module_exit(adm5120_flash_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION(DRV_DESC); diff --git a/target/linux/adm5120-2.6/files/drivers/mtd/myloader.c b/target/linux/adm5120-2.6/files/drivers/mtd/myloader.c deleted file mode 100644 index ad207e5559..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/mtd/myloader.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * $Id$ - * - * Parse MyLoader-style flash partition tables and produce a Linux partition - * array to match. - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was based on drivers/mtd/redboot.c - * Author: Red Hat, Inc. - David Woodhouse - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include - -#include -#include - -#include - -#include - -#define NAME_LEN_MAX 20 -#define NAME_MYLOADER "MyLoader" -#define NAME_PARTITION_TABLE "Partition Table" -#define BLOCK_LEN_MIN 0x10000 - -int parse_myloader_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long origin) -{ - struct mylo_partition_table *tab; - struct mylo_partition *part; - struct mtd_partition *mtd_parts; - struct mtd_partition *mtd_part; - int num_parts; - int ret, i; - size_t retlen; - size_t parts_len; - char *names; - unsigned long offset; - unsigned long blocklen; - - tab = vmalloc(sizeof(*tab)); - if (!tab) { - return -ENOMEM; - goto out; - } - - blocklen = master->erasesize; - if (blocklen < BLOCK_LEN_MIN) - blocklen = BLOCK_LEN_MIN; - - /* Partition Table is always located on the second erase block */ - offset = blocklen; - printk(KERN_NOTICE "%s: searching for MyLoader partition table at " - "offset 0x%lx\n", master->name, offset); - - ret = master->read(master, offset, sizeof(*tab), &retlen, (void *)tab); - if (ret) - goto out; - - if (retlen != sizeof(*tab)) { - ret = -EIO; - goto out_free_buf; - } - - /* Check for Partition Table magic number */ - if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) { - printk(KERN_NOTICE "%s: no MyLoader partition table found\n", - master->name); - ret = 0; - goto out_free_buf; - } - - /* The MyLoader and the Partition Table is always present */ - num_parts = 2; - - /* Detect number of used partitions */ - for (i = 0; i < MYLO_MAX_PARTITIONS; i++) { - part = &tab->partitions[i]; - - if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE) - continue; - - num_parts++; - } - - mtd_parts = kzalloc((num_parts*sizeof(*mtd_part) + num_parts*NAME_LEN_MAX), - GFP_KERNEL); - - if (!mtd_parts) { - ret = -ENOMEM; - goto out_free_buf; - } - - mtd_part = mtd_parts; - names = (char *)&mtd_parts[num_parts]; - - strncpy(names, NAME_MYLOADER, NAME_LEN_MAX-1); - mtd_part->name = names; - mtd_part->offset = 0; - mtd_part->size = blocklen; - mtd_part->mask_flags = MTD_WRITEABLE; - mtd_part++; - names += NAME_LEN_MAX; - - strncpy(names, NAME_PARTITION_TABLE, NAME_LEN_MAX-1); - mtd_part->name = names; - mtd_part->offset = blocklen; - mtd_part->size = blocklen; - mtd_part->mask_flags = MTD_WRITEABLE; - mtd_part++; - names += NAME_LEN_MAX; - - for (i = 0; i < MYLO_MAX_PARTITIONS; i++) { - part = &tab->partitions[i]; - - if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE) - continue; - - sprintf(names, "partition%d", i); - mtd_part->offset = le32_to_cpu(part->addr); - mtd_part->size = le32_to_cpu(part->size); - mtd_part->name = names; - mtd_part++; - names += NAME_LEN_MAX; - } - - *pparts = mtd_parts; - ret = num_parts; - -out_free_buf: - vfree(tab); -out: - return ret; -} - -static struct mtd_part_parser mylo_mtd_parser = { - .owner = THIS_MODULE, - .parse_fn = parse_myloader_partitions, - .name = NAME_MYLOADER, -}; - -static int __init mylo_mtd_parser_init(void) -{ - return register_mtd_parser(&mylo_mtd_parser); -} - -static void __exit mylo_mtd_parser_exit(void) -{ - deregister_mtd_parser(&mylo_mtd_parser); -} - -module_init(mylo_mtd_parser_init); -module_exit(mylo_mtd_parser_exit); - -MODULE_AUTHOR("Gabor Juhos "); -MODULE_DESCRIPTION("Parsing code for MyLoader partition tables"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/adm5120-2.6/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/adm5120-2.6/files/drivers/mtd/nand/rbmipsnand.c deleted file mode 100644 index 2e7059d186..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/mtd/nand/rbmipsnand.c +++ /dev/null @@ -1,207 +0,0 @@ -/*==============================================================================*/ -/* rbmipsnand.c */ -/* This module is derived from the 2.4 driver shipped by Microtik for their */ -/* Routerboard 1xx and 5xx series boards. It provides support for the built in */ -/* NAND flash on the Routerboard 1xx series boards for Linux 2.6.19+. */ -/* Licence: Original Microtik code seems not to have a licence. */ -/* Rewritten code all GPL V2. */ -/* Copyright(C) 2007 david.goodenough@linkchoose.co.uk (for rewriten code) */ -/*==============================================================================*/ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x))) - -#define NAND_RW_REG 0x0 //data register -#define NAND_SET_CEn 0x1 //CE# low -#define NAND_CLR_CEn 0x2 //CE# high -#define NAND_CLR_CLE 0x3 //CLE low -#define NAND_SET_CLE 0x4 //CLE high -#define NAND_CLR_ALE 0x5 //ALE low -#define NAND_SET_ALE 0x6 //ALE high -#define NAND_SET_SPn 0x7 //SP# low (use spare area) -#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area) -#define NAND_SET_WPn 0x9 //WP# low -#define NAND_CLR_WPn 0xA //WP# high -#define NAND_STS_REG 0xB //Status register - -#define MEM32(x) *((volatile unsigned *) (x)) - -static struct mtd_partition partition_info[] = { - { - name: "RouterBoard NAND Boot", - offset: 0, - size: 4 * 1024 * 1024 - }, - { - name: "rootfs", - offset: MTDPART_OFS_NXTBLK, - size: MTDPART_SIZ_FULL - } -}; - -static struct nand_ecclayout rb_ecclayout = { - .eccbytes = 6, - .eccpos = { 8, 9, 10, 13, 14, 15 }, - .oobavail = 9, - .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1} } -}; - -struct adm5120_nand_info { - struct nand_chip chip; - struct mtd_info mtd; - void __iomem *io_base; -#ifdef CONFIG_MTD_PARTITIONS - int nr_parts; - struct mtd_partition *parts; -#endif - unsigned int init_ok; -}; - -static int rb100_dev_ready(struct mtd_info *mtd) -{ - return SMEM1(NAND_STS_REG) & 0x80; -} - -static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - if (ctrl & NAND_CTRL_CHANGE) - { - SMEM1((( ctrl & NAND_CLE) ? NAND_SET_CLE : NAND_CLR_CLE)) = 0x01; - SMEM1((( ctrl & NAND_ALE) ? NAND_SET_ALE : NAND_CLR_ALE)) = 0x01; - SMEM1((( ctrl & NAND_NCE) ? NAND_SET_CEn : NAND_CLR_CEn)) = 0x01; - } - if (cmd != NAND_CMD_NONE) - writeb( cmd, chip->IO_ADDR_W); -} - -/*========================================================================*/ -/* We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader */ -/* will not be able to find the kernel that we load. So set the oobinfo */ -/* when creating the partitions. */ -/*========================================================================*/ - - -unsigned get_rbnand_block_size(struct adm5120_nand_info *data) -{ - return data->init_ok ? data->mtd.writesize : 0; -} - -EXPORT_SYMBOL(get_rbnand_block_size); - -static int rbmips_probe(struct platform_device *pdev) -{ - struct adm5120_nand_info *data; - int res = 0; - - /* Allocate memory for the nand_chip structure */ - data = kzalloc(sizeof(*data), GFP_KERNEL); - if (!data) { - dev_err(&pdev->dev, "Failed to allocate device structure\n"); - return -ENOMEM; - - } - - data->io_base = ioremap(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); - - if (data->io_base == NULL) { - dev_err(&pdev->dev, "ioremap failed\n"); - kfree(data); - return -EIO; - } - - MEM32(0xB2000064) = 0x100; - MEM32(0xB2000008) = 0x1; - SMEM1(NAND_SET_SPn) = 0x01; - SMEM1(NAND_CLR_WPn) = 0x01; - - data->chip.priv = &data; - data->mtd.priv = &data->chip; - data->mtd.owner = THIS_MODULE; - - data->init_ok = 0; - data->chip.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE); - data->chip.IO_ADDR_W = data->chip.IO_ADDR_R; - data->chip.cmd_ctrl = rbmips_hwcontrol100; - data->chip.dev_ready = rb100_dev_ready; - data->chip.ecc.mode = NAND_ECC_SOFT; - data->chip.ecc.layout = &rb_ecclayout; - data->chip.chip_delay = 25; - data->chip.options |= NAND_NO_AUTOINCR; - - platform_set_drvdata(pdev, data); - - /* Why do we need to scan 4 times ? */ - if (nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1)) { - printk(KERN_INFO "RB1xxx nand device not found\n"); - res = -ENXIO; - goto out; - } - - add_mtd_partitions(&data->mtd, partition_info, 2); - data->init_ok = 1; - - res = add_mtd_device(&data->mtd); - if (!res) - return res; - - nand_release(&data->mtd); -out: - platform_set_drvdata(pdev, NULL); - iounmap(data->io_base); - kfree(data); - return res; -} - -static int __devexit rbmips_remove(struct platform_device *pdev) -{ - struct adm5120_nand_info *data = platform_get_drvdata(pdev); - - nand_release(&data->mtd); - iounmap(data->io_base); - kfree(data); - - return 0; -} - -static struct platform_driver adm5120_nand_driver = { - .probe = rbmips_probe, - .remove = rbmips_remove, - .driver = { - .name = "adm5120-nand", - .owner = THIS_MODULE, - }, -}; - -static int __init adm5120_nand_init(void) -{ - int err; - err = platform_driver_register(&adm5120_nand_driver); - return err; -} - -static void __exit adm5120_nand_exit(void) -{ - platform_driver_unregister(&adm5120_nand_driver); -} - -module_init(adm5120_nand_init); -module_exit(adm5120_nand_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Goodenough, Florian Fainelli"); -MODULE_DESCRIPTION("RouterBOARD 100 NAND driver"); - diff --git a/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c b/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c deleted file mode 100644 index 80c81abf74..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.c +++ /dev/null @@ -1,625 +0,0 @@ -/* - * ADM5120 built in ethernet switch driver - * - * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 - * - * Inspiration for this driver came from the original ADMtek 2.4 - * driver, Copyright ADMtek Inc. - * - * NAPI extensions by Thomas Langer (Thomas.Langer@infineon.com) - * and Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007 - * - * TODO: Add support of high prio queues (currently disabled) - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "adm5120sw.h" - -#include -#include - -MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)"); -MODULE_DESCRIPTION("ADM5120 ethernet switch driver"); -MODULE_LICENSE("GPL"); - -/* default settings - unlimited TX and RX on all ports, default shaper mode */ -static unsigned char bw_matrix[SW_DEVS] = { - 0, 0, 0, 0, 0, 0 -}; - -static int adm5120_nrdevs; - -static struct net_device *adm5120_devs[SW_DEVS]; -/* Lookup table port -> device */ -static struct net_device *adm5120_port[SW_DEVS]; - -static struct adm5120_dma - adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))), - adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))), - adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))), - adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))), - *adm5120_dma_txh, - *adm5120_dma_txl, - *adm5120_dma_rxh, - *adm5120_dma_rxl; -static struct sk_buff - *adm5120_skb_rxh[ADM5120_DMA_RXH], - *adm5120_skb_rxl[ADM5120_DMA_RXL], - *adm5120_skb_txh[ADM5120_DMA_TXH], - *adm5120_skb_txl[ADM5120_DMA_TXL]; -static int adm5120_rxli = 0; -static int adm5120_txli = 0; -/*static int adm5120_txhi = 0;*/ -static int adm5120_if_open = 0; - -static inline void adm5120_set_reg(unsigned int reg, unsigned long val) -{ - *(volatile unsigned long*)(SW_BASE+reg) = val; -} - -static inline unsigned long adm5120_get_reg(unsigned int reg) -{ - return *(volatile unsigned long*)(SW_BASE+reg); -} - -static inline void adm5120_rx_dma_update(struct adm5120_dma *dma, - struct sk_buff *skb, int end) -{ - dma->status = 0; - dma->cntl = 0; - dma->len = ADM5120_DMA_RXSIZE; - dma->data = ADM5120_DMA_ADDR(skb->data) | - ADM5120_DMA_OWN | (end ? ADM5120_DMA_RINGEND : 0); -} - -static int adm5120_rx(struct net_device *dev,int *budget) -{ - struct sk_buff *skb, *skbn; - struct adm5120_sw *priv; - struct net_device *cdev; - struct adm5120_dma *dma; - int port, len, quota; - - quota = min(dev->quota, *budget); - dma = &adm5120_dma_rxl[adm5120_rxli]; - while (!(dma->data & ADM5120_DMA_OWN) && quota) { - port = (dma->status & ADM5120_DMA_PORTID); - port >>= ADM5120_DMA_PORTSHIFT; - cdev = adm5120_port[port]; - if (cdev != dev) { /* The current packet belongs to a different device */ - if ((cdev==NULL) || !netif_running(cdev)) { - /* discard (update with old skb) */ - skb = skbn = NULL; - goto rx_skip; - } - else { - netif_rx_schedule(cdev);/* Start polling next device */ - return 1; /* return 1 -> More packets to process */ - } - - } - skb = adm5120_skb_rxl[adm5120_rxli]; - len = (dma->status & ADM5120_DMA_LEN); - len >>= ADM5120_DMA_LENSHIFT; - len -= ETH_FCS; - - priv = netdev_priv(dev); - if (len <= 0 || len > ADM5120_DMA_RXSIZE || - dma->status & ADM5120_DMA_FCSERR) { - priv->stats.rx_errors++; - skbn = NULL; - } else { - skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16); - if (skbn) { - skb_put(skb, len); - skb->dev = dev; - skb->protocol = eth_type_trans(skb, dev); - skb->ip_summed = CHECKSUM_UNNECESSARY; - dev->last_rx = jiffies; - priv->stats.rx_packets++; - priv->stats.rx_bytes += len; - skb_reserve(skbn, NET_IP_ALIGN); - adm5120_skb_rxl[adm5120_rxli] = skbn; - } else { - printk(KERN_INFO "%s recycling!\n", dev->name); - } - } -rx_skip: - adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli], - adm5120_skb_rxl[adm5120_rxli], - (ADM5120_DMA_RXL-1==adm5120_rxli)); - if (ADM5120_DMA_RXL == ++adm5120_rxli) - adm5120_rxli = 0; - dma = &adm5120_dma_rxl[adm5120_rxli]; - if (skbn){ - netif_receive_skb(skb); - dev->quota--; - (*budget)--; - quota--; - } - } /* while */ - /* If there are still packets to process, return 1 */ - if (quota){ - /* No more packets to process, so disable the polling and reenable the interrupts */ - netif_rx_complete(dev); - adm5120_set_reg(ADM5120_INT_MASK, - adm5120_get_reg(ADM5120_INT_MASK) & - ~(ADM5120_INT_RXL|ADM5120_INT_LFULL)); - return 0; - - - } - return 1; -} - -static irqreturn_t adm5120_sw_irq(int irq, void *dev_id) -{ - unsigned long intreg, intmask; - int port; - struct net_device *dev; - - intmask = adm5120_get_reg(ADM5120_INT_MASK); /* Remember interrupt mask */ - adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL); /* Disable interrupts */ - - intreg = adm5120_get_reg(ADM5120_INT_ST); /* Read interrupt status */ - adm5120_set_reg(ADM5120_INT_ST, intreg); /* Clear interrupt status */ - - /* In NAPI operation the interrupts are disabled and the polling mechanism - * is activated. The interrupts are finally enabled again in the polling routine. - */ - if (intreg & (ADM5120_INT_RXL|ADM5120_INT_LFULL)) { - /* check rx buffer for port number */ - port = adm5120_dma_rxl[adm5120_rxli].status & ADM5120_DMA_PORTID; - port >>= ADM5120_DMA_PORTSHIFT; - dev = adm5120_port[port]; - if ((dev==NULL) || !netif_running(dev)) { - /* discard (update with old skb) */ - adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli], - adm5120_skb_rxl[adm5120_rxli], - (ADM5120_DMA_RXL-1==adm5120_rxli)); - if (ADM5120_DMA_RXL == ++adm5120_rxli) - adm5120_rxli = 0; - } - else { - netif_rx_schedule(dev); - intmask |= (ADM5120_INT_RXL|ADM5120_INT_LFULL); /* Disable RX interrupts */ - } - } -#ifdef CONFIG_DEBUG - if (intreg & ~(intmask)) - printk(KERN_INFO "adm5120sw: IRQ 0x%08X unexpected!\n", (unsigned int)(intreg & ~(intmask))); -#endif - - adm5120_set_reg(ADM5120_INT_MASK, intmask); - - return IRQ_HANDLED; -} - -static void adm5120_set_vlan(char *matrix) -{ - unsigned long val; - int vlan_port, port; - - val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24); - adm5120_set_reg(ADM5120_VLAN_GI, val); - val = matrix[4] + (matrix[5]<<8); - adm5120_set_reg(ADM5120_VLAN_GII, val); - /* Now set/update the port vs. device lookup table */ - for (port=0; porttrans_start = jiffies; - dma = &adm5120_dma_txl[adm5120_txli]; - if (dma->data & ADM5120_DMA_OWN) { - /* We want to write a packet but the TX queue is still - * occupied by the DMA. We are faster than the DMA... */ - dev_kfree_skb(skb); - priv->stats.tx_dropped++; - return 0; - } - data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN; - if (adm5120_txli == ADM5120_DMA_TXL-1) - data |= ADM5120_DMA_RINGEND; - dma->status = - ((skb->lenlen) << ADM5120_DMA_LENSHIFT) | - (0x1 << priv->port); - - dma->len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - priv->stats.tx_packets++; - priv->stats.tx_bytes += skb->len; - - /* free old skbs here instead of tx completion interrupt: - * will hold some more memory allocated but reduces interrupts */ - if (skbl[adm5120_txli]){ - dev_kfree_skb(skbl[adm5120_txli]); - } - skbl[adm5120_txli] = skb; - - dma->data = data; /* Here we enable the buffer for the TX DMA machine */ - adm5120_set_reg(ADM5120_SEND_TRIG, ADM5120_SEND_TRIG_L); - if (++adm5120_txli == ADM5120_DMA_TXL) - adm5120_txli = 0; - return 0; -} - -static void adm5120_tx_timeout(struct net_device *dev) -{ - printk(KERN_INFO "%s: TX timeout\n",dev->name); -} - -static struct net_device_stats *adm5120_sw_stats(struct net_device *dev) -{ - struct adm5120_sw *priv = netdev_priv(dev); - int portmask; - unsigned long adm5120_cpup_conf_reg; - - portmask = adm5120_eth_vlans[priv->port] & 0x3f; - - adm5120_cpup_conf_reg = adm5120_get_reg(ADM5120_CPUP_CONF); - - if (dev->flags & IFF_PROMISC) - adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL); - else - adm5120_cpup_conf_reg |= (portmask << ADM5120_DISUNSHIFT); - - if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || dev->mc_count) - adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL); - else - adm5120_cpup_conf_reg |= (portmask << ADM5120_DISMCSHIFT); - - /* If there is any port configured to be in promiscuous mode, then the */ - /* Bridge Test Mode has to be activated. This will result in */ - /* transporting also packets learned in another VLAN to be forwarded */ - /* to the CPU. */ - /* The difficult scenario is when we want to build a bridge on the CPU.*/ - /* Assume we have port0 and the CPU port in VLAN0 and port1 and the */ - /* CPU port in VLAN1. Now we build a bridge on the CPU between */ - /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode. */ - /* Now assume a packet with ethernet source address 99 enters port 0 */ - /* It will be forwarded to the CPU because it is unknown. Then the */ - /* bridge in the CPU will send it to VLAN1 and it goes out at port 1. */ - /* When now a packet with ethernet destination address 99 comes in at */ - /* port 1 in VLAN1, then the switch has learned that this address is */ - /* located at port 0 in VLAN0. Therefore the switch will drop */ - /* this packet. In order to avoid this and to send the packet still */ - /* to the CPU, the Bridge Test Mode has to be activated. */ - - /* Check if there is any vlan in promisc mode. */ - if (~adm5120_cpup_conf_reg & ADM5120_DISUNALL) - adm5120_cpup_conf_reg |= ADM5120_BTM; /* Set the BTM */ - else - adm5120_cpup_conf_reg &= ~ADM5120_BTM; /* Disable the BTM */ - - adm5120_set_reg(ADM5120_CPUP_CONF,adm5120_cpup_conf_reg); - - return &((struct adm5120_sw *)netdev_priv(dev))->stats; -} - -static void adm5120_set_multicast_list(struct net_device *dev) -{ - struct adm5120_sw *priv = netdev_priv(dev); - int portmask; - - portmask = adm5120_eth_vlans[priv->port] & 0x3f; - - if (dev->flags & IFF_PROMISC) - adm5120_set_reg(ADM5120_CPUP_CONF, - adm5120_get_reg(ADM5120_CPUP_CONF) & - ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL)); - else - adm5120_set_reg(ADM5120_CPUP_CONF, - adm5120_get_reg(ADM5120_CPUP_CONF) | - (portmask << ADM5120_DISUNSHIFT)); - - if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || - dev->mc_count) - adm5120_set_reg(ADM5120_CPUP_CONF, - adm5120_get_reg(ADM5120_CPUP_CONF) & - ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL)); - else - adm5120_set_reg(ADM5120_CPUP_CONF, - adm5120_get_reg(ADM5120_CPUP_CONF) | - (portmask << ADM5120_DISMCSHIFT)); -} - -static void adm5120_write_mac(struct net_device *dev) -{ - struct adm5120_sw *priv = netdev_priv(dev); - unsigned char *mac = dev->dev_addr; - - adm5120_set_reg(ADM5120_MAC_WT1, - mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24)); - adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) | - (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN); - - while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE)); -} - -static int adm5120_sw_set_mac_address(struct net_device *dev, void *p) -{ - struct sockaddr *addr = p; - - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - adm5120_write_mac(dev); - return 0; -} - -static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - int err; - struct adm5120_sw_info info; - struct adm5120_sw *priv = netdev_priv(dev); - - switch(cmd) { - case SIOCGADMINFO: - info.magic = 0x5120; - info.ports = adm5120_nrdevs; - info.vlan = priv->port; - err = copy_to_user(rq->ifr_data, &info, sizeof(info)); - if (err) - return -EFAULT; - break; - case SIOCSMATRIX: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - err = copy_from_user(adm5120_eth_vlans, rq->ifr_data, - sizeof(adm5120_eth_vlans)); - if (err) - return -EFAULT; - adm5120_set_vlan(adm5120_eth_vlans); - break; - case SIOCGMATRIX: - err = copy_to_user(rq->ifr_data, adm5120_eth_vlans, - sizeof(adm5120_eth_vlans)); - if (err) - return -EFAULT; - break; - case SIOCGETBW: - err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix)); - if (err) - return -EFAULT; - break; - case SIOCSETBW: - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix)); - if (err) - return -EFAULT; - adm5120_set_bw(bw_matrix); - break; - default: - return -EOPNOTSUPP; - } - return 0; -} - -static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skbl, - int num) -{ - memset(dma, 0, sizeof(struct adm5120_dma)*num); - dma[num-1].data |= ADM5120_DMA_RINGEND; - memset(skbl, 0, sizeof(struct skb*)*num); -} - -static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skbl, - int num) -{ - int i; - - memset(dma, 0, sizeof(struct adm5120_dma)*num); - for (i=0; iport = i; - dev->base_addr = SW_BASE; - dev->irq = ADM5120_IRQ_SWITCH; - dev->open = adm5120_sw_open; - dev->hard_start_xmit = adm5120_sw_tx; - dev->stop = adm5120_sw_stop; - dev->get_stats = adm5120_sw_stats; - dev->set_multicast_list = adm5120_set_multicast_list; - dev->do_ioctl = adm5120_do_ioctl; - dev->tx_timeout = adm5120_tx_timeout; - dev->watchdog_timeo = ETH_TX_TIMEOUT; - dev->set_mac_address = adm5120_sw_set_mac_address; - dev->poll = adm5120_rx; - dev->weight = 64; - - memcpy(dev->dev_addr, adm5120_eth_macs[i], 6); - adm5120_write_mac(dev); - - if ((err = register_netdev(dev))) { - free_netdev(dev); - goto out_int; - } - printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i); - } - /* setup vlan/port mapping after devs are filled up */ - adm5120_set_vlan(adm5120_eth_vlans); - - adm5120_set_reg(ADM5120_CPUP_CONF, - ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL); - - return 0; - -out_int: - /* Undo everything that did succeed */ - for (; i; i--) { - unregister_netdev(adm5120_devs[i-1]); - free_netdev(adm5120_devs[i-1]); - } - free_irq(ADM5120_IRQ_SWITCH, NULL); -out: - printk(KERN_ERR "ADM5120 Ethernet switch init failed\n"); - return err; -} - -static void __exit adm5120_sw_exit(void) -{ - int i; - - for (i = 0; i < SW_DEVS; i++) { - unregister_netdev(adm5120_devs[i]); - free_netdev(adm5120_devs[i]); - } - - free_irq(ADM5120_IRQ_SWITCH, NULL); - - for (i = 0; i < ADM5120_DMA_RXH; i++) { - if (!adm5120_skb_rxh[i]) - break; - kfree_skb(adm5120_skb_rxh[i]); - } - for (i = 0; i < ADM5120_DMA_RXL; i++) { - if (!adm5120_skb_rxl[i]) - break; - kfree_skb(adm5120_skb_rxl[i]); - } -} - -module_init(adm5120_sw_init); -module_exit(adm5120_sw_exit); diff --git a/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.h b/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.h deleted file mode 100644 index a3b4ec0179..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/net/adm5120sw.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * Defines for ADM5120 built in ethernet switch driver - * - * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 - * - * Values come from ADM5120 datasheet and original ADMtek 2.4 driver, - * Copyright ADMtek Inc. - */ - -#ifndef _INCLUDE_ADM5120SW_H_ -#define _INCLUDE_ADM5120SW_H_ - -#define SW_BASE KSEG1ADDR(0x12000000) -#define SW_DEVS 6 - -#define ETH_TX_TIMEOUT HZ*400 -#define ETH_FCS 4; - -#define ADM5120_CODE 0x00 /* CPU description */ -#define ADM5120_CODE_PQFP 0x20000000 /* package type */ -#define ADM5120_SW_CONF 0x20 /* Switch configuration register */ -#define ADM5120_SW_CONF_BPM 0x00300000 /* Mask for backpressure mode */ -#define ADM5120_CPUP_CONF 0x24 /* CPU port config */ -#define ADM5120_DISCCPUPORT 0x00000001 /* disable cpu port */ -#define ADM5120_CRC_PADDING 0x00000002 /* software crc */ -#define ADM5120_BTM 0x00000004 /* bridge test mode */ -#define ADM5120_DISUNSHIFT 9 -#define ADM5120_DISUNALL 0x00007e00 /* disable unknown from all */ -#define ADM5120_DISMCSHIFT 16 -#define ADM5120_DISMCALL 0x003f0000 /* disable multicast from all */ -#define ADM5120_PORT_CONF0 0x28 -#define ADM5120_ENMC 0x00003f00 /* Enable MC routing (ex cpu) */ -#define ADM5120_ENBP 0x003f0000 /* Enable Back Pressure */ -#define ADM5120_PORTDISALL 0x0000003F -#define ADM5120_VLAN_GI 0x40 /* VLAN settings */ -#define ADM5120_VLAN_GII 0x44 -#define ADM5120_SEND_TRIG 0x48 -#define ADM5120_SEND_TRIG_L 0x00000001 -#define ADM5120_SEND_TRIG_H 0x00000002 -#define ADM5120_MAC_WT0 0x58 -#define ADM5120_MAC_WRITE 0x00000001 -#define ADM5120_MAC_WRITE_DONE 0x00000002 -#define ADM5120_VLAN_EN 0x00000040 -#define ADM5120_MAC_WT1 0x5c -#define ADM5120_BW_CTL0 0x60 /* Bandwidth control 0 */ -#define ADM5120_BW_CTL1 0x64 /* Bandwidth control 1 */ -#define ADM5120_PHY_CNTL2 0x7c -#define ADM5120_AUTONEG 0x0000001f /* Auto negotiate */ -#define ADM5120_NORMAL 0x01f00000 /* PHY normal mode */ -#define ADM5120_AUTOMDIX 0x3e000000 /* Auto MDIX */ -#define ADM5120_PHY_CNTL3 0x80 -#define ADM5120_PHY_NTH 0x00000400 -#define ADM5120_PRI_CNTL 0x84 -#define ADM5120_INT_ST 0xb0 -#define ADM5120_INT_RXH 0x0000004 -#define ADM5120_INT_RXL 0x0000008 -#define ADM5120_INT_HFULL 0x0000010 -#define ADM5120_INT_LFULL 0x0000020 -#define ADM5120_INT_TXH 0x0000001 -#define ADM5120_INT_TXL 0x0000002 -#define ADM5120_INT_MASK 0xb4 -#define ADM5120_INTMASKALL 0x1FDEFFF /* All interrupts */ -#define ADM5120_INTHANDLE (ADM5120_INT_RXH | ADM5120_INT_RXL | \ - ADM5120_INT_HFULL | ADM5120_INT_LFULL | \ - ADM5120_INT_TXH | ADM5120_INT_TXL) -#define ADM5120_SEND_HBADDR 0xd0 -#define ADM5120_SEND_LBADDR 0xd4 -#define ADM5120_RECEIVE_HBADDR 0xd8 -#define ADM5120_RECEIVE_LBADDR 0xdc - -struct adm5120_dma { - u32 data; - u32 cntl; - u32 len; - u32 status; -} __attribute__ ((packed)); - -#define ADM5120_DMA_MASK 0x01ffffff -#define ADM5120_DMA_OWN 0x80000000 /* buffer owner */ -#define ADM5120_DMA_RINGEND 0x10000000 /* Last in DMA ring */ - -#define ADM5120_DMA_ADDR(ptr) ((u32)(ptr) & ADM5120_DMA_MASK) -#define ADM5120_DMA_PORTID 0x00007000 -#define ADM5120_DMA_PORTSHIFT 12 -#define ADM5120_DMA_LEN 0x07ff0000 -#define ADM5120_DMA_LENSHIFT 16 -#define ADM5120_DMA_FCSERR 0x00000008 - -#define ADM5120_DMA_TXH 2 -#define ADM5120_DMA_TXL 64 -#define ADM5120_DMA_RXH 2 -#define ADM5120_DMA_RXL 64 - -#define ADM5120_DMA_RXSIZE 1550 -#define ADM5120_DMA_EXTRA 20 - -struct adm5120_sw { - int port; - struct net_device_stats stats; -}; - -#define SIOCSMATRIX SIOCDEVPRIVATE -#define SIOCGMATRIX SIOCDEVPRIVATE+1 -#define SIOCGADMINFO SIOCDEVPRIVATE+2 -#define SIOCGETBW SIOCDEVPRIVATE+3 -#define SIOCSETBW SIOCDEVPRIVATE+4 - -struct adm5120_sw_info { - u16 magic; - u16 ports; - u16 vlan; -}; - -#endif /* _INCLUDE_ADM5120SW_H_ */ diff --git a/target/linux/adm5120-2.6/files/drivers/serial/adm5120_uart.c b/target/linux/adm5120-2.6/files/drivers/serial/adm5120_uart.c deleted file mode 100644 index 83c5f72012..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/serial/adm5120_uart.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * Serial driver for ADM5120 SoC - * - * Derived from drivers/serial/uart00.c - * Copyright 2001 Altera Corporation - * - * Some pieces are derived from the ADMtek 2.4 serial driver. - * Copyright (C) ADMtek Incorporated, 2003 - * daniell@admtek.com.tw - * Which again was derived from drivers/char/serial.c - * Copyright (C) Linus Torvalds et al. - * - * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define ADM5120_UART_REG(base, reg) \ - (*(volatile u32 *)KSEG1ADDR((base)+(reg))) - -#define ADM5120_UARTCLK_FREQ 62500000 -#define ADM5120_UART_BAUDDIV(rate) ((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1)) - -#define ADM5120_UART_BAUD115200 ADM5120_UART_BAUDDIV(115200) - -#define ADM5120_UART_DATA 0x00 -#define ADM5120_UART_RS 0x04 -#define ADM5120_UART_LCR_H 0x08 -#define ADM5120_UART_LCR_M 0x0c -#define ADM5120_UART_LCR_L 0x10 -#define ADM5120_UART_CR 0x14 -#define ADM5120_UART_FR 0x18 -#define ADM5120_UART_IR 0x1c - -#define ADM5120_UART_FE 0x01 -#define ADM5120_UART_PE 0x02 -#define ADM5120_UART_BE 0x04 -#define ADM5120_UART_OE 0x08 -#define ADM5120_UART_ERR 0x0f -#define ADM5120_UART_FIFO_EN 0x10 -#define ADM5120_UART_EN 0x01 -#define ADM5120_UART_TIE 0x20 -#define ADM5120_UART_RIE 0x50 -#define ADM5120_UART_IE 0x78 -#define ADM5120_UART_CTS 0x01 -#define ADM5120_UART_DSR 0x02 -#define ADM5120_UART_DCD 0x04 -#define ADM5120_UART_TXFF 0x20 -#define ADM5120_UART_TXFE 0x80 -#define ADM5120_UART_RXFE 0x10 -#define ADM5120_UART_BRK 0x01 -#define ADM5120_UART_PEN 0x02 -#define ADM5120_UART_EPS 0x04 -#define ADM5120_UART_STP2 0x08 -#define ADM5120_UART_W5 0x00 -#define ADM5120_UART_W6 0x20 -#define ADM5120_UART_W7 0x40 -#define ADM5120_UART_W8 0x60 -#define ADM5120_UART_MIS 0x01 -#define ADM5120_UART_RIS 0x02 -#define ADM5120_UART_TIS 0x04 -#define ADM5120_UART_RTIS 0x08 - -static void adm5120ser_stop_tx(struct uart_port *port) -{ - ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE; -} - -static void adm5120ser_irq_rx(struct uart_port *port) -{ - struct tty_struct *tty = port->info->tty; - unsigned int status, ch, rds, flg, ignored = 0; - - status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); - while (!(status & ADM5120_UART_RXFE)) { - /* - * We need to read rds before reading the - * character from the fifo - */ - rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS); - ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA); - port->icount.rx++; - - if (tty->low_latency) - tty_flip_buffer_push(tty); - - flg = TTY_NORMAL; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (rds & ADM5120_UART_ERR) - goto handle_error; - if (uart_handle_sysrq_char(port, ch)) - goto ignore_char; - - error_return: - tty_insert_flip_char(tty, ch, flg); - - ignore_char: - status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); - } - out: - tty_flip_buffer_push(tty); - return; - - handle_error: - ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff; - if (rds & ADM5120_UART_BE) { - port->icount.brk++; - if (uart_handle_break(port)) - goto ignore_char; - } else if (rds & ADM5120_UART_PE) - port->icount.parity++; - else if (rds & ADM5120_UART_FE) - port->icount.frame++; - if (rds & ADM5120_UART_OE) - port->icount.overrun++; - - if (rds & port->ignore_status_mask) { - if (++ignored > 100) - goto out; - goto ignore_char; - } - rds &= port->read_status_mask; - - if (rds & ADM5120_UART_BE) - flg = TTY_BREAK; - else if (rds & ADM5120_UART_PE) - flg = TTY_PARITY; - else if (rds & ADM5120_UART_FE) - flg = TTY_FRAME; - - if (rds & ADM5120_UART_OE) { - /* - * CHECK: does overrun affect the current character? - * ASSUMPTION: it does not. - */ - tty_insert_flip_char(tty, ch, flg); - ch = 0; - flg = TTY_OVERRUN; - } -#ifdef CONFIG_MAGIC_SYSRQ - port->sysrq = 0; -#endif - goto error_return; -} - -static void adm5120ser_irq_tx(struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - int count; - - if (port->x_char) { - ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) = - port->x_char; - port->icount.tx++; - port->x_char = 0; - return; - } - if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { - adm5120ser_stop_tx(port); - return; - } - - count = port->fifosize >> 1; - do { - ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) = - xmit->buf[xmit->tail]; - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } while (--count > 0); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - adm5120ser_stop_tx(port); -} - -static void adm5120ser_irq_modem(struct uart_port *port) -{ - unsigned int status; - - status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); - - if (status & ADM5120_UART_DCD) - uart_handle_dcd_change(port, status & ADM5120_UART_DCD); - - if (status & ADM5120_UART_DSR) - port->icount.dsr++; - - if (status & ADM5120_UART_CTS) - uart_handle_cts_change(port, status & ADM5120_UART_CTS); - - wake_up_interruptible(&port->info->delta_msr_wait); -} - -static irqreturn_t adm5120ser_irq(int irq, void *dev_id) -{ - struct uart_port *port = dev_id; - unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR); - - if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS)) - adm5120ser_irq_rx(port); - if (ir & ADM5120_UART_TIS) - adm5120ser_irq_tx(port); - if (ir & ADM5120_UART_MIS) { - adm5120ser_irq_modem(port); - ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff; - } - - return IRQ_HANDLED; -} - -static unsigned int adm5120ser_tx_empty(struct uart_port *port) -{ - unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); - return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0; -} - -static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} - -static unsigned int adm5120ser_get_mctrl(struct uart_port *port) -{ - unsigned int result = 0; - unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); - - if (fr & ADM5120_UART_CTS) - result |= TIOCM_CTS; - if (fr & ADM5120_UART_DSR) - result |= TIOCM_DSR; - if (fr & ADM5120_UART_DCD) - result |= TIOCM_CAR; - return result; -} - -static void adm5120ser_start_tx(struct uart_port *port) -{ - ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE; -} - -static void adm5120ser_stop_rx(struct uart_port *port) -{ - ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE; -} - -static void adm5120ser_enable_ms(struct uart_port *port) -{ -} - -static void adm5120ser_break_ctl(struct uart_port *port, int break_state) -{ - unsigned long flags; - unsigned long lcrh; - - spin_lock_irqsave(&port->lock, flags); - lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H); - if (break_state == -1) - lcrh |= ADM5120_UART_BRK; - else - lcrh &= ~ADM5120_UART_BRK; - ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh; - spin_unlock_irqrestore(&port->lock, flags); -} - -static int adm5120ser_startup(struct uart_port *port) -{ - int ret; - - ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port); - if (ret) { - printk(KERN_ERR "Couldn't get irq %d\n", port->irq); - return ret; - } - ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |= - ADM5120_UART_FIFO_EN; - ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= - ADM5120_UART_EN | ADM5120_UART_IE; - return 0; -} - -static void adm5120ser_shutdown(struct uart_port *port) -{ - ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE; - free_irq(port->irq, port); -} - -static void adm5120ser_set_termios(struct uart_port *port, - struct ktermios *termios, struct ktermios *old) -{ - unsigned int baud, quot, lcrh; - unsigned long flags; - - termios->c_cflag |= CREAD; - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - lcrh = ADM5120_UART_FIFO_EN; - switch (termios->c_cflag & CSIZE) { - case CS5: - lcrh |= ADM5120_UART_W5; - break; - case CS6: - lcrh |= ADM5120_UART_W6; - break; - case CS7: - lcrh |= ADM5120_UART_W7; - break; - default: - lcrh |= ADM5120_UART_W8; - break; - } - if (termios->c_cflag & CSTOPB) - lcrh |= ADM5120_UART_STP2; - if (termios->c_cflag & PARENB) { - lcrh |= ADM5120_UART_PEN; - if (!(termios->c_cflag & PARODD)) - lcrh |= ADM5120_UART_EPS; - } - - spin_lock_irqsave(port->lock, flags); - - ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh; - - /* - * Update the per-port timeout. - */ - uart_update_timeout(port, termios->c_cflag, baud); - - port->read_status_mask = ADM5120_UART_OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE; - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= ADM5120_UART_BE; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= ADM5120_UART_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns to (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= ADM5120_UART_OE; - } - - quot = ADM5120_UART_BAUD115200; - ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff; - ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8; - - spin_unlock_irqrestore(&port->lock, flags); -} - -static const char *adm5120ser_type(struct uart_port *port) -{ - return port->type == PORT_ADM5120 ? "ADM5120" : NULL; -} - -static void adm5120ser_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) - port->type = PORT_ADM5120; -} - -static void adm5120ser_release_port(struct uart_port *port) -{ - release_mem_region(port->iobase, ADM5120_UART_SIZE); -} - -static int adm5120ser_request_port(struct uart_port *port) -{ - return request_mem_region(port->iobase, ADM5120_UART_SIZE, - "adm5120-uart") != NULL ? 0 : -EBUSY; -} - -static struct uart_ops adm5120ser_ops = { - .tx_empty = adm5120ser_tx_empty, - .set_mctrl = adm5120ser_set_mctrl, - .get_mctrl = adm5120ser_get_mctrl, - .stop_tx = adm5120ser_stop_tx, - .start_tx = adm5120ser_start_tx, - .stop_rx = adm5120ser_stop_rx, - .enable_ms = adm5120ser_enable_ms, - .break_ctl = adm5120ser_break_ctl, - .startup = adm5120ser_startup, - .shutdown = adm5120ser_shutdown, - .set_termios = adm5120ser_set_termios, - .type = adm5120ser_type, - .config_port = adm5120ser_config_port, - .release_port = adm5120ser_release_port, - .request_port = adm5120ser_request_port, -}; - -static void adm5120console_put(const char c) -{ - while ((ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_FR) & - ADM5120_UART_TXFF) != 0); - ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_DATA) = c; -} - -static void adm5120console_write(struct console *con, const char *s, - unsigned int count) -{ - while (count--) { - if (*s == '\n') - adm5120console_put('\r'); - adm5120console_put(*s); - s++; - } -} - -static int adm5120console_setup(struct console *con, char *options) -{ - /* Set to 115200 baud, 8N1 and enable FIFO */ - ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_L) = - ADM5120_UART_BAUD115200 & 0xff; - ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_M) = - ADM5120_UART_BAUD115200 >> 8; - ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_H) = - ADM5120_UART_W8 | ADM5120_UART_FIFO_EN; - /* Enable port */ - ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_CR) = - ADM5120_UART_EN; - - return 0; -} - -static struct uart_driver adm5120ser_reg; - -static struct console adm5120_serconsole = { - .name = "ttyS", - .write = adm5120console_write, - .device = uart_console_device, - .setup = adm5120console_setup, - .flags = CON_PRINTBUFFER, - .cflag = B115200 | CS8 | CREAD, - .index = 0, - .data = &adm5120ser_reg, -}; - -static int __init adm5120console_init(void) -{ - register_console(&adm5120_serconsole); - return 0; -} - -console_initcall(adm5120console_init); - - -static struct uart_port adm5120ser_ports[] = { - { - .iobase = ADM5120_UART0_BASE, - .irq = ADM5120_IRQ_UART0, - .uartclk = ADM5120_UARTCLK_FREQ, - .fifosize = 16, - .ops = &adm5120ser_ops, - .line = 0, - .flags = ASYNC_BOOT_AUTOCONF, - }, -#if (CONFIG_ADM5120_NR_UARTS > 1) - { - .iobase = ADM5120_UART1_BASE, - .irq = ADM5120_IRQ_UART1, - .uartclk = ADM5120_UARTCLK_FREQ, - .fifosize = 16, - .ops = &adm5120ser_ops, - .line = 1, - .flags = ASYNC_BOOT_AUTOCONF, - }, -#endif -}; - -static struct uart_driver adm5120ser_reg = { - .owner = THIS_MODULE, - .driver_name = "ttyS", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = CONFIG_ADM5120_NR_UARTS, - .cons = &adm5120_serconsole, -}; - -static int __init adm5120ser_init(void) -{ - int ret, i; - - ret = uart_register_driver(&adm5120ser_reg); - if (!ret) { - for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++) - uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]); - } - - return ret; -} - -__initcall(adm5120ser_init); diff --git a/target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c deleted file mode 100644 index 4e88777287..0000000000 --- a/target/linux/adm5120-2.6/files/drivers/usb/host/adm5120-hcd.c +++ /dev/null @@ -1,996 +0,0 @@ -/* - * HCD driver for ADM5120 SoC - * - * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) - * - * Based on the ADMtek 2.4 driver - * (C) Copyright 2003 Junius Chen - * Which again was based on the ohci and uhci drivers. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "../core/hcd.h" - -MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)"); - -#define PFX "adm5120-hcd: " - -#define ADMHCD_REG_CONTROL 0x00 -#define ADMHCD_SW_RESET 0x00000008 /* Reset */ -#define ADMHCD_DMAA 0x00000004 /* DMA arbitration control */ -#define ADMHCD_SW_INTREQ 0x00000002 /* request software int */ -#define ADMHCD_HOST_EN 0x00000001 /* Host enable */ -#define ADMHCD_REG_INTSTATUS 0x04 -#define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */ -#define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */ -#define ADMHCD_INT_SW 0x20000000 /* software interrupt */ -#define ADMHCD_INT_TD 0x00100000 /* TD completed */ -#define ADMHCD_FNO 0x00000800 /* Frame number overaflow */ -#define ADMHCD_SO 0x00000400 /* Scheduling overrun */ -#define ADMHCD_INSMI 0x00000200 /* Root hub status change */ -#define ADMHCD_BABI 0x00000100 /* Babble detected, host mode */ -#define ADMHCD_RESI 0x00000020 /* Resume detected */ -#define ADMHCD_SOFI 0x00000010 /* SOF transmitted/received, host mode */ -#define ADMHCD_REG_INTENABLE 0x08 -#define ADMHCD_INT_EN 0x80000000 /* Interrupt enable */ -#define ADMHCD_INTMASK 0x00000001 /* Interrupt mask */ -#define ADMHCD_REG_HOSTCONTROL 0x10 -#define ADMHCD_DMA_EN 0x00000004 /* USB host DMA enable */ -#define ADMHCD_STATE_MASK 0x00000003 -#define ADMHCD_STATE_RST 0x00000000 /* bus state reset */ -#define ADMHCD_STATE_RES 0x00000001 /* bus state resume */ -#define ADMHCD_STATE_OP 0x00000002 /* bus state operational */ -#define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */ -#define ADMHCD_REG_FMINTERVAL 0x18 -#define ADMHCD_REG_FMNUMBER 0x1c -#define ADMHCD_REG_LSTHRESH 0x70 -#define ADMHCD_REG_RHDESCR 0x74 -#define ADMHCD_CRWE 0x20000000 /* Clear wakeup enable */ -#define ADMHCD_DRWE 0x10000000 /* Device remote wakeup enable */ -#define ADMHCD_HW_OCIC 0x08000000 /* Over current indication change */ -#define ADMHCD_LPSC 0x04000000 /* Local power switch change */ -#define ADMHCD_OCI 0x02000000 /* Over current indication */ -#define ADMHCD_LPS 0x01000000 /* Local power switch/global power switch */ -#define ADMHCD_NOCP 0x00000800 /* No over current protect mode */ -#define ADMHCD_OPCM 0x00000400 /* Over current protect mode */ -#define ADMHCD_NPS 0x00000200 /* No Power Switch */ -#define ADMHCD_PSM 0x00000100 /* Power switch mode */ -#define ADMHCD_REG_PORTSTATUS0 0x78 -#define ADMHCD_CCS 0x00000001 /* current connect status */ -#define ADMHCD_PES 0x00000002 /* port enable status */ -#define ADMHCD_PSS 0x00000004 /* port suspend status */ -#define ADMHCD_POCI 0x00000008 /* port overcurrent indicator */ -#define ADMHCD_PRS 0x00000010 /* port reset status */ -#define ADMHCD_PPS 0x00000100 /* port power status */ -#define ADMHCD_LSDA 0x00000200 /* low speed device attached */ -#define ADMHCD_CSC 0x00010000 /* connect status change */ -#define ADMHCD_PESC 0x00020000 /* enable status change */ -#define ADMHCD_PSSC 0x00040000 /* suspend status change */ -#define ADMHCD_OCIC 0x00080000 /* overcurrent change*/ -#define ADMHCD_PRSC 0x00100000 /* reset status change */ -#define ADMHCD_REG_PORTSTATUS1 0x7c -#define ADMHCD_REG_HOSTHEAD 0x80 - -#define ADMHCD_NUMPORTS 1 -#define ADMHCD_DESC_ALIGN 16 - -struct admhcd_ed { - /* Don't change first four, they used for DMA */ - u32 control; - struct admhcd_td *tail; - struct admhcd_td *head; - struct admhcd_ed *next; - /* the rest is for the driver only: */ - struct admhcd_td *cur; - struct usb_host_endpoint *ep; - struct urb *urb; - struct admhcd_ed *real; -} __attribute__ ((packed)); - -#define ADMHCD_ED_EPSHIFT 7 /* Shift for endpoint number */ -#define ADMHCD_ED_INT 0x00000800 /* Is this an int endpoint */ -#define ADMHCD_ED_SPEED 0x00002000 /* Is it a high speed dev? */ -#define ADMHCD_ED_SKIP 0x00004000 /* Skip this ED */ -#define ADMHCD_ED_FORMAT 0x00008000 /* Is this an isoc endpoint */ -#define ADMHCD_ED_MAXSHIFT 16 /* Shift for max packet size */ - -struct admhcd_td { - /* Don't change first four, they are used for DMA */ - u32 control; - u32 buffer; - u32 buflen; - struct admhcd_td *next; - /* the rest is for the driver only: */ - struct urb *urb; - struct admhcd_td *real; -} __attribute__ ((packed)); - -#define ADMHCD_TD_OWN 0x80000000 -#define ADMHCD_TD_TOGGLE 0x00000000 -#define ADMHCD_TD_DATA0 0x01000000 -#define ADMHCD_TD_DATA1 0x01800000 -#define ADMHCD_TD_OUT 0x00200000 -#define ADMHCD_TD_IN 0x00400000 -#define ADMHCD_TD_SETUP 0x00000000 -#define ADMHCD_TD_ISO 0x00010000 -#define ADMHCD_TD_R 0x00040000 -#define ADMHCD_TD_INTEN 0x00010000 - -static int admhcd_td_err[16] = { - 0, /* No */ - -EREMOTEIO, /* CRC */ - -EREMOTEIO, /* bit stuff */ - -EREMOTEIO, /* data toggle */ - -EPIPE, /* stall */ - -ETIMEDOUT, /* timeout */ - -EPROTO, /* pid err */ - -EPROTO, /* unexpected pid */ - -EREMOTEIO, /* data overrun */ - -EREMOTEIO, /* data underrun */ - -ETIMEDOUT, /* 1010 */ - -ETIMEDOUT, /* 1011 */ - -EREMOTEIO, /* buffer overrun */ - -EREMOTEIO, /* buffer underrun */ - -ETIMEDOUT, /* 1110 */ - -ETIMEDOUT, /* 1111 */ -}; - -#define ADMHCD_TD_ERRMASK 0x38000000 -#define ADMHCD_TD_ERRSHIFT 27 - -#define TD(td) ((struct admhcd_td *)(((u32)(td)) & ~(ADMHCD_DESC_ALIGN-1))) -#define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~(ADMHCD_DESC_ALIGN-1))) - -struct admhcd { - spinlock_t lock; - - /* Root hub registers */ - u32 rhdesca; - u32 rhdescb; - u32 rhstatus; - u32 rhport[2]; - - /* async schedule: control, bulk */ - struct list_head async; - u32 base; - u32 dma_en; - unsigned long flags; -}; - -static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd) -{ - return (struct admhcd *)(hcd->hcd_priv); -} - -static inline struct usb_hcd *admhcd_to_hcd(struct admhcd *admhcd) -{ - return container_of((void *)admhcd, struct usb_hcd, hcd_priv); -} - -static char hcd_name[] = "adm5120-hcd"; - -static u32 admhcd_reg_get(struct admhcd *ahcd, int reg) -{ - return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg); -} - -static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val) -{ - *(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val; -} - -static void admhcd_lock(struct admhcd *ahcd) -{ - spin_lock_irqsave(&ahcd->lock, ahcd->flags); - ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) & - ADMHCD_DMA_EN; - admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP); -} - -static void admhcd_unlock(struct admhcd *ahcd) -{ - admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, - ADMHCD_STATE_OP | ahcd->dma_en); - spin_unlock_irqrestore(&ahcd->lock, ahcd->flags); -} - -static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb) -{ - struct admhcd_td *tdn, *td; - - tdn = kzalloc(sizeof(*tdn)+ADMHCD_DESC_ALIGN, GFP_ATOMIC); - if (!tdn) - return NULL; - - tdn->real = tdn; - tdn = TD(KSEG1ADDR(tdn)); - if (ed->cur == NULL) { - ed->cur = tdn; - ed->head = tdn; - ed->tail = tdn; - td = tdn; - } else { - /* Supply back the old tail and link in new td as tail */ - td = TD(ed->tail); - TD(ed->tail)->next = tdn; - ed->tail = tdn; - } - td->urb = urb; - - return td; -} - -static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb) -{ - struct admhcd_td *td, **tdp; - - if (urb == NULL) - ed->control |= ADMHCD_ED_SKIP; - tdp = &ed->cur; - td = ed->cur; - do { - if (td->urb == urb) - break; - tdp = &td->next; - td = TD(td->next); - } while (td); - while (td && td->urb == urb) { - *tdp = TD(td->next); - kfree(td->real); - td = *tdp; - } -} - -/* Find an endpoint's descriptor, if needed allocate a new one and link it - in the DMA chain - */ -static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd, - struct usb_host_endpoint *ep, struct urb *urb) -{ - struct admhcd_ed *hosthead; - struct admhcd_ed *found = NULL, *ed = NULL; - unsigned int pipe = urb->pipe; - - admhcd_lock(ahcd); - hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD); - if (hosthead) { - for (ed = hosthead;; ed = ED(ed->next)) { - if (ed->ep == ep) { - found = ed; - break; - } - if (ED(ed->next) == hosthead) - break; - } - } - if (!found) { - found = kzalloc(sizeof(*found)+ADMHCD_DESC_ALIGN, GFP_ATOMIC); - if (!found) - goto out; - found->real = found; - found->ep = ep; - found = ED(KSEG1ADDR(found)); - found->control = usb_pipedevice(pipe) | - (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) | - (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) | - (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) | - (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) | - (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT); - /* Alloc first dummy td */ - admhcd_td_alloc(found, NULL); - if (hosthead) { - found->next = hosthead; - ed->next = found; - } else { - found->next = found; - admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found); - } - } -out: - admhcd_unlock(ahcd); - return found; -} - -static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td, - dma_addr_t data, int len) -{ - td->buffer = data; - td->buflen = len; - td->control = control; - return TD(td->next); -} - -static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed) -{ - struct admhcd_td *td = ed->cur; - - if (ed->urb) - return; - if (td->urb) { - ed->urb = td->urb; - while (1) { - td->control |= ADMHCD_TD_OWN; - if (TD(td->next)->urb != td->urb) { - td->buflen |= ADMHCD_TD_INTEN; - break; - } - td = TD(td->next); - } - } - ed->head = TD(ed->head); - ahcd->dma_en |= ADMHCD_DMA_EN; -} - -static irqreturn_t admhcd_irq(struct usb_hcd *hcd) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - u32 intstatus; - - intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS); - if (intstatus & ADMHCD_INT_FATAL) { - admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL); - /* FIXME: handle fatal interrupts */ - } - - if (intstatus & ADMHCD_INT_SW) { - admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW); - /* FIXME: handle software interrupts */ - } - - if (intstatus & ADMHCD_INT_TD) { - struct admhcd_ed *ed, *head; - - admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD); - - head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD); - ed = head; - if (ed) do { - /* Is it a finished TD? */ - if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) { - struct admhcd_td *td; - int error; - - td = ed->cur; - error = (td->control & ADMHCD_TD_ERRMASK) >> - ADMHCD_TD_ERRSHIFT; - ed->urb->status = admhcd_td_err[error]; - admhcd_td_free(ed, ed->urb); - // Calculate real length!!! - ed->urb->actual_length = ed->urb->transfer_buffer_length; - ed->urb->hcpriv = NULL; - usb_hcd_giveback_urb(hcd, ed->urb); - ed->urb = NULL; - } - admhcd_ed_start(ahcd, ed); - ed = ED(ed->next); - } while (ed != head); - } - - return IRQ_HANDLED; -} - -static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep, - struct urb *urb, gfp_t mem_flags) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - struct admhcd_ed *ed; - struct admhcd_td *td; - int size = 0, i, zero = 0, ret = 0; - unsigned int pipe = urb->pipe, toggle = 0; - dma_addr_t data = (dma_addr_t)urb->transfer_buffer; - int data_len = urb->transfer_buffer_length; - - ed = admhcd_get_ed(ahcd, ep, urb); - if (!ed) - return -ENOMEM; - - switch(usb_pipetype(pipe)) { - case PIPE_CONTROL: - size = 2; - case PIPE_INTERRUPT: - case PIPE_BULK: - default: - size += urb->transfer_buffer_length / 4096; - if (urb->transfer_buffer_length % 4096) - size++; - if (size == 0) - size++; - else if (urb->transfer_flags & URB_ZERO_PACKET && - !(urb->transfer_buffer_length % - usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) { - size++; - zero = 1; - } - break; - case PIPE_ISOCHRONOUS: - size = urb->number_of_packets; - break; - } - - admhcd_lock(ahcd); - /* Remember the first td */ - td = admhcd_td_alloc(ed, urb); - if (!td) { - ret = -ENOMEM; - goto out; - } - /* Allocate additionall tds first */ - for (i = 1; i < size; i++) { - if (admhcd_td_alloc(ed, urb) == NULL) { - admhcd_td_free(ed, urb); - ret = -ENOMEM; - goto out; - } - } - - if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) - toggle = ADMHCD_TD_TOGGLE; - else { - toggle = ADMHCD_TD_DATA0; - usb_settoggle(urb->dev, usb_pipeendpoint(pipe), - usb_pipeout(pipe), 1); - } - - switch(usb_pipetype(pipe)) { - case PIPE_CONTROL: - td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0, - td, (dma_addr_t)urb->setup_packet, 8); - while (data_len > 0) { - td = admhcd_td_fill(ADMHCD_TD_DATA1 - | ADMHCD_TD_R | - (usb_pipeout(pipe) ? - ADMHCD_TD_OUT : ADMHCD_TD_IN), td, - data, data_len % 4097); - data_len -= 4096; - } - admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ? - ADMHCD_TD_IN : ADMHCD_TD_OUT), td, - data, 0); - break; - case PIPE_INTERRUPT: - case PIPE_BULK: - //info ok for interrupt? - i = 0; - while(data_len > 4096) { - td = admhcd_td_fill((usb_pipeout(pipe) ? - ADMHCD_TD_OUT : - ADMHCD_TD_IN | ADMHCD_TD_R) | - (i ? ADMHCD_TD_TOGGLE : toggle), td, - data, 4096); - data += 4096; - data_len -= 4096; - i++; - } - td = admhcd_td_fill((usb_pipeout(pipe) ? - ADMHCD_TD_OUT : ADMHCD_TD_IN) | - (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len); - i++; - if (zero) - admhcd_td_fill((usb_pipeout(pipe) ? - ADMHCD_TD_OUT : ADMHCD_TD_IN) | - (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0); - break; - case PIPE_ISOCHRONOUS: - for (i = 0; i < urb->number_of_packets; i++) { - td = admhcd_td_fill(ADMHCD_TD_ISO | - ((urb->start_frame + i) & 0xffff), td, - data + urb->iso_frame_desc[i].offset, - urb->iso_frame_desc[i].length); - } - break; - } - urb->hcpriv = ed; - admhcd_ed_start(ahcd, ed); -out: - admhcd_unlock(ahcd); - return ret; -} - -static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - struct admhcd_ed *ed; - - admhcd_lock(ahcd); - - ed = urb->hcpriv; - if (ed && ed->urb != urb) - admhcd_td_free(ed, urb); - - admhcd_unlock(ahcd); - return 0; -} - -static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - struct admhcd_ed *ed, *edt, *head; - - admhcd_lock(ahcd); - - head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD); - if (!head) - goto out; - for (ed = head; ED(ed->next) != head; ed = ED(ed->next)) - if (ed->ep == ep) - break; - if (ed->ep != ep) - goto out; - while (ed->cur) - admhcd_td_free(ed, ed->cur->urb); - if (head == ed) { - if (ED(ed->next) == ed) { - admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0); - ahcd->dma_en = 0; - goto out_free; - } - head = ED(ed->next); - for (edt = head; ED(edt->next) != head; edt = ED(edt->next)); - edt->next = ED(ed->next); - admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next); - goto out_free; - } - for (edt = head; edt->next != ed; edt = edt->next); - edt->next = ed->next; - -out_free: - kfree(ed->real); -out: - admhcd_unlock(ahcd); -} - -static int admhcd_get_frame_number(struct usb_hcd *hcd) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - - return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff; -} - -static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - int port; - - *buf = 0; - for (port = 0; port < ADMHCD_NUMPORTS; port++) { - if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) & - (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC | - ADMHCD_PRSC)) - *buf |= (1 << (port + 1)); - } - return !!*buf; -} - -static __u8 root_hub_hub_des[] = { - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x02, /* __u8 bNbrPorts; */ - 0x0a, 0x00, /* __u16 wHubCharacteristics; */ - 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0mA */ - 0x00, /* __u8 DeviceRemovable; */ - 0xff, /* __u8 PortPwrCtrlMask; */ -}; - -static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, - u16 wIndex, char *buf, u16 wLength) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - int retval = 0, len; - unsigned int port = wIndex -1; - - switch (typeReq) { - - case GetHubStatus: - *(__le32 *)buf = cpu_to_le32(0); - break; - case GetPortStatus: - if (port >= ADMHCD_NUMPORTS) - goto err; - *(__le32 *)buf = cpu_to_le32( - admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)); - break; - case SetHubFeature: /* We don't implement these */ - case ClearHubFeature: - switch (wValue) { - case C_HUB_OVER_CURRENT: - case C_HUB_LOCAL_POWER: - break; - default: - goto err; - } - case SetPortFeature: - if (port >= ADMHCD_NUMPORTS) - goto err; - - switch (wValue) { - case USB_PORT_FEAT_SUSPEND: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_PSS); - break; - case USB_PORT_FEAT_RESET: - if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) - & ADMHCD_CCS) { - admhcd_reg_set(ahcd, - ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_PRS | ADMHCD_CSC); - mdelay(50); - admhcd_reg_set(ahcd, - ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_PES | ADMHCD_CSC); - } - break; - case USB_PORT_FEAT_POWER: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_PPS); - break; - default: - goto err; - } - break; - case ClearPortFeature: - if (port >= ADMHCD_NUMPORTS) - goto err; - - switch (wValue) { - case USB_PORT_FEAT_ENABLE: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_CCS); - break; - case USB_PORT_FEAT_C_ENABLE: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_PESC); - break; - case USB_PORT_FEAT_SUSPEND: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_POCI); - break; - case USB_PORT_FEAT_C_SUSPEND: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_PSSC); - case USB_PORT_FEAT_POWER: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_LSDA); - break; - case USB_PORT_FEAT_C_CONNECTION: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_CSC); - break; - case USB_PORT_FEAT_C_OVER_CURRENT: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_OCIC); - break; - case USB_PORT_FEAT_C_RESET: - admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, - ADMHCD_PRSC); - break; - default: - goto err; - } - break; - case GetHubDescriptor: - len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength); - memcpy(buf, root_hub_hub_des, len); - break; - default: -err: - retval = -EPIPE; - } - - return retval; -} - -static int admhcd_start(struct usb_hcd *hcd) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - unsigned long flags; - - spin_lock_irqsave(&ahcd->lock, flags); - - /* Initialise the HCD registers */ - admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0); - mdelay(10); - - admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET); - - while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET) { - printk(KERN_WARNING PFX "waiting for reset to complete\n"); - mdelay(1); - } - - //hcd->uses_new_polling = 1; - - /* Enable USB host mode */ - admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN); - - /* Set host specific settings */ - admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000); - admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf); - admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628); - - /* Set interrupts */ - admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, ADMHCD_INT_ACT | - ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD); - admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_ACT | - ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD); - - /* Power on all ports */ - admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC); - - /* HCD is now operationnal */ - admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP); - - hcd->state = HC_STATE_RUNNING; - - spin_unlock_irqrestore(&ahcd->lock, flags); - - return 0; -} - -static int admhcd_sw_reset(struct admhcd *ahcd) -{ - int retries = 15; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&ahcd->lock, flags); - - admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0); - mdelay(10); - - admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET); - - while (--retries) { - mdelay(1); - if (!(admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET)) - break; - } - if (!retries) { - printk(KERN_WARNING "%s: software reset timeout\n", hcd_name); - ret = -ETIME; - } - spin_unlock_irqrestore(&ahcd->lock, flags); - return ret; -} - -static int admhcd_reset(struct usb_hcd *hcd) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - u32 state = 0; - int ret, timeout = 15; /* ms */ - unsigned long t; - - ret = admhcd_sw_reset(ahcd); - if (ret) - return ret; - - t = jiffies + msecs_to_jiffies(timeout); - do { - spin_lock_irq(&ahcd->lock); - state = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL); - spin_unlock_irq(&ahcd->lock); - state &= ADMHCD_STATE_MASK; - if (state == ADMHCD_STATE_RST) - break; - msleep(4); - } while (time_before_eq(jiffies, t)); - - if (state != ADMHCD_STATE_RST) { - printk(KERN_WARNING "%s: device not ready after %dms\n", - hcd_name, timeout); - ret = -ENODEV; - } - - return ret; -} - -static void admhcd_stop(struct usb_hcd *hcd) -{ - struct admhcd *ahcd = hcd_to_admhcd(hcd); - unsigned long flags; - u32 val; - - spin_lock_irqsave(&ahcd->lock, flags); - admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0); - - /* Set global control of power for ports */ - val = admhcd_reg_get(ahcd, ADMHCD_REG_RHDESCR); - val &= (~ADMHCD_PSM | ADMHCD_LPS); - admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, val); - - spin_unlock_irqrestore(&ahcd->lock, flags); - - /* Ask for software reset */ - admhcd_sw_reset(ahcd); -} - - -static struct hc_driver adm5120_hc_driver = { - .description = hcd_name, - .product_desc = "ADM5120 HCD", - .hcd_priv_size = sizeof(struct admhcd), - .irq = admhcd_irq, - .flags = HCD_USB11, - .urb_enqueue = admhcd_urb_enqueue, - .urb_dequeue = admhcd_urb_dequeue, - .endpoint_disable = admhcd_endpoint_disable, - .get_frame_number = admhcd_get_frame_number, - .hub_status_data = admhcd_hub_status_data, - .hub_control = admhcd_hub_control, - .start = admhcd_start, - .stop = admhcd_stop, - .reset = admhcd_reset, -}; - -#define resource_len(r) (((r)->end - (r)->start) + 1) - -static int __init adm5120hcd_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct admhcd *ahcd; - struct resource *data; - void __iomem *data_reg; - - int err = 0, irq; - - if (pdev->num_resources < 2) { - printk(KERN_WARNING PFX "not enough resources\n"); - err = -ENODEV; - goto out; - } - - irq = platform_get_irq(pdev, 0); - data = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (pdev->dev.dma_mask) { - printk(KERN_DEBUG PFX "no we won't dma\n"); - return -EINVAL; - } - - if (!data || irq < 0) { - printk(KERN_DEBUG PFX "either IRQ or data resource is invalid\n"); - err = -ENODEV; - goto out; - } - - if (!request_mem_region(data->start, resource_len(data), hcd_name)) { - printk(KERN_DEBUG PFX "cannot request memory regions for the data resource\n"); - err = -EBUSY; - goto out; - } - - data_reg = ioremap(data->start, resource_len(data)); - if (data_reg == NULL) { - printk(KERN_DEBUG PFX "unable to ioremap\n"); - err = -ENOMEM; - goto out_mem; - } - - hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id); - if (!hcd) { - printk(KERN_DEBUG PFX "unable to create the hcd\n"); - err = -ENOMEM; - goto out_unmap; - } - - hcd->rsrc_start = data->start; - hcd->rsrc_len = resource_len(data); - hcd->regs = data_reg; - - ahcd = hcd_to_admhcd(hcd); - ahcd->base = (u32)data_reg; - - spin_lock_init(&ahcd->lock); - INIT_LIST_HEAD(&ahcd->async); - - hcd->product_desc = "ADM5120 HCD"; - - err = usb_add_hcd(hcd, irq, IRQF_DISABLED); - if (err) { - printk(KERN_DEBUG PFX "unable to add hcd\n"); - goto out_dev; - } - - return 0; - -out_dev: - usb_put_hcd(hcd); -out_unmap: - iounmap(data_reg); -out_mem: - release_mem_region(data->start, resource_len(data)); -out: - return err; -} - -#ifdef CONFIG_PM -static int adm5120hcd_suspend(struct platform_device *pdev, pm_message_t state) -{ - pdev->dev.power.power_state = state; - mdelay(1); - return 0; -} - -static int adm5120hcd_resume(struct platform_device *pdev, pm_message_t state) -{ - pdev->dev.power.power_state = PMSG_ON; - mdelay(1); - return 0; -} -#else -#define adm5120hcd_suspend NULL -#define adm5120hcd_resume NULL -#endif - -static int __init_or_module adm5120hcd_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - struct admhcd *ahcd; - - if (!hcd) - return 0; - ahcd = hcd_to_admhcd(hcd); - usb_remove_hcd(hcd); - - usb_put_hcd(hcd); - return 0; -} - -static struct platform_driver adm5120hcd_driver = { - .probe = adm5120hcd_probe, - .remove = adm5120hcd_remove, - .suspend = adm5120hcd_suspend, - .remove = adm5120hcd_resume, - .driver = { - .name = (char *)hcd_name, - .owner = THIS_MODULE, - }, -}; - -static int __init adm5120hcd_init(void) -{ - int ret; - - if (usb_disabled()) { - printk(KERN_DEBUG PFX "USB support is disabled\n"); - return -ENODEV; - } - - if (mips_machgroup != MACH_GROUP_ADM5120) { - printk(KERN_DEBUG PFX "unsupported machine group\n"); - return -ENODEV; - } - - ret = platform_driver_register(&adm5120hcd_driver); - if (ret == 0) - printk(KERN_INFO PFX "registered\n"); - - return ret; -} - -static void __exit adm5120hcd_exit(void) -{ - platform_driver_unregister(&adm5120hcd_driver); - printk(KERN_INFO PFX "driver unregistered\n"); -} - -module_init(adm5120hcd_init); -module_exit(adm5120hcd_exit); diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_board.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_board.h deleted file mode 100644 index 23f62a2932..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_board.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * $Id$ - * - * ADM5120 board definitions - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_BOARD_H_ -#define _ADM5120_BOARD_H_ - -#include -#include - -#define ADM5120_BOARD_NAMELEN 64 - -struct adm5120_board { - unsigned long mach_type; - char name[ADM5120_BOARD_NAMELEN]; - - void (*board_setup)(void); - void (*board_reset)(void); - - unsigned int eth_num_ports; - unsigned char *eth_vlans; - unsigned int num_devices; - struct platform_device **devices; - - struct list_head list; -}; - -extern void adm5120_board_register(struct adm5120_board *) __init; - -#endif /* _ADM5120_BOARD_H_ */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h deleted file mode 100644 index f5ab1b3f1c..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_defs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * $Id$ - * - * ADM5120 SoC definitions - * - * This file defines some constants specific to the ADM5120 SoC - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ -#ifndef _ADM5120_DEFS_H -#define _ADM5120_DEFS_H - -#define ADM5120_SDRAM0_BASE 0x00000000 -#define ADM5120_SDRAM1_BASE 0x01000000 -#define ADM5120_SRAM1_BASE 0x10000000 -#define ADM5120_MPMC_BASE 0x11000000 -#define ADM5120_USBC_BASE 0x11200000 -#define ADM5120_PCIMEM_BASE 0x11400000 -#define ADM5120_PCIIO_BASE 0x11500000 -#define ADM5120_PCICFG_ADDR 0x115FFFF0 -#define ADM5120_PCICFG_DATA 0x115FFFF8 -#define ADM5120_SWITCH_BASE 0x12000000 -#define ADM5120_INTC_BASE 0x12200000 -#define ADM5120_UART0_BASE 0x12600000 -#define ADM5120_UART1_BASE 0x12800000 -#define ADM5120_SRAM0_BASE 0x1FC00000 - -#define ADM5120_MPMC_SIZE 0x1000 -#define ADM5120_USBC_SIZE 0x84 -#define ADM5120_PCIMEM_SIZE (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE) -#define ADM5120_PCIIO_SIZE (ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE) -#define ADM5120_PCICFG_SIZE 0x10 -#define ADM5120_SWITCH_SIZE 0x114 -#define ADM5120_INTC_SIZE 0x28 -#define ADM5120_UART_SIZE 0x20 - -#define ADM5120_CLK_175 175000000 -#define ADM5120_CLK_200 200000000 -#define ADM5120_CLK_225 225000000 -#define ADM5120_CLK_250 250000000 - -#define ADM5120_UART_CLOCK 62500000 - -#endif /* _ADM5120_DEFS_H */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h deleted file mode 100644 index b8b9c5d475..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_info.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_INFO_H -#define _ADM5120_INFO_H - -#include - -extern unsigned int adm5120_prom_type; -#define ADM5120_PROM_GENERIC 0 -#define ADM5120_PROM_CFE 1 -#define ADM5120_PROM_MYLOADER 2 -#define ADM5120_PROM_ROUTERBOOT 3 -#define ADM5120_PROM_BOOTBASE 4 -#define ADM5120_PROM_UBOOT 5 -#define ADM5120_PROM_LAST 5 - -extern unsigned int adm5120_product_code; -extern unsigned int adm5120_revision; -extern unsigned int adm5120_nand_boot; - -extern unsigned long adm5120_speed; -#define ADM5120_SPEED_175 175000000 -#define ADM5120_SPEED_200 200000000 -#define ADM5120_SPEED_225 225000000 -#define ADM5120_SPEED_250 250000000 - -extern unsigned int adm5120_package; -#define ADM5120_PACKAGE_PQFP 0 -#define ADM5120_PACKAGE_BGA 1 - -extern unsigned long adm5120_memsize; - -/* - * TODO:remove adm5120_eth* variables when the switch driver will be - * converted into a real platform driver - */ -extern unsigned int adm5120_eth_num_ports; -extern unsigned char adm5120_eth_macs[6][6]; -extern unsigned char adm5120_eth_vlans[6]; - -extern void adm5120_soc_init(void) __init; -extern void adm5120_mem_init(void) __init; -extern void adm5120_time_init(void) __init; -extern void adm5120_ndelay(u32 ns); - -extern void adm5120_restart(char *command); -extern void adm5120_halt(void); -extern void adm5120_power_off(void); - -extern void (*adm5120_board_reset)(void); - -static inline int adm5120_package_pqfp(void) -{ - return (adm5120_package == ADM5120_PACKAGE_PQFP); -} - -static inline int adm5120_package_bga(void) -{ - return (adm5120_package == ADM5120_PACKAGE_BGA); -} - -static inline int adm5120_has_pci(void) -{ - return (adm5120_package == ADM5120_PACKAGE_BGA); -} - -static inline int adm5120_has_gmii(void) -{ - return (adm5120_package == ADM5120_PACKAGE_BGA); -} - -#endif /* _ADM5120_INFO_H */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h deleted file mode 100644 index 4d75259514..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_intc.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * $Id$ - * - * ADM5120 interrupt controller definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in interrupt controller. - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_INTC_H_ -#define _ADM5120_INTC_H_ - -/* - * INTC register offsets - */ -#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ -#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ -#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ -#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ -#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR -#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ -#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ -#define INTC_REG_IRQ_TEST_SOURCE 0x1C -#define INTC_REG_IRQ_SOURCE_SELECT 0x20 -#define INTC_REG_INT_LEVEL 0x24 - -/* - * INTC IRQ numbers - */ -#define INTC_IRQ_TIMER 0 /* built in timer */ -#define INTC_IRQ_UART0 1 /* built-in UART0 */ -#define INTC_IRQ_UART1 2 /* built-in UART1 */ -#define INTC_IRQ_USBC 3 /* USB Host Controller */ -#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ -#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ -#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ -#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ -#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ -#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ -#define INTC_IRQ_LAST INTC_IRQ_SWITCH -#define INTC_IRQ_COUNT 10 - -/* - * INTC register bits - */ -#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER ) -#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 ) -#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 ) -#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC ) -#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 ) -#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 ) -#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 ) -#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 ) -#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 ) -#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH ) -#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1) - -#endif /* _ADM5120_INTC_H_ */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_irq.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_irq.h deleted file mode 100644 index 1b9e219891..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_irq.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific IRQ numbers - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ -#ifndef _ADM5120_IRQ_H_ -#define _ADM5120_IRQ_H_ - -#include - -#define MIPS_IRQ_HW0 2 -#define MIPS_IRQ_COUNTER 7 -#define MIPS_IRQ_COUNT 8 - -#define ADM5120_CPU_IRQ_BASE 0 -#define ADM5120_INTC_IRQ_BASE (ADM5120_CPU_IRQ_BASE+MIPS_IRQ_COUNT) -#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE+INTC_IRQ_COUNT) - -#define ADM5120_CPU_IRQ(x) (ADM5120_CPU_IRQ_BASE + (x)) -#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x)) - -#define ADM5120_IRQ_INTC ADM5120_CPU_IRQ(MIPS_IRQ_HW0) -#define ADM5120_IRQ_COUNTER ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER) - -#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER) -#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0) -#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1) -#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC) -#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2) -#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4) -#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0) -#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1) -#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2) -#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH) - -#endif diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h deleted file mode 100644 index c821150c69..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * $Id$ - * - * ADM5120 MPMC (Multiport Memory Controller) register definitions - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#ifndef _ADM5120_MPMC_H_ -#define _ADM5120_MPMC_H_ - -#define MPMC_REG_CTRL 0x0000 -#define MPMC_REG_STATUS 0x0004 -#define MPMC_REG_CONF 0x0008 -#define MPMC_REG_DC 0x0020 -#define MPMC_REG_DR 0x0024 -#define MPMC_REG_DRP 0x0030 - -#define MPMC_REG_DC0 0x0100 -#define MPMC_REG_DRC0 0x0104 -#define MPMC_REG_DC1 0x0120 -#define MPMC_REG_DRC1 0x0124 -#define MPMC_REG_DC2 0x0140 -#define MPMC_REG_DRC2 0x0144 -#define MPMC_REG_DC3 0x0160 -#define MPMC_REG_DRC3 0x0164 -#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */ -#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */ -#define MPMC_REG_SC2 0x0240 -#define MPMC_REG_SC3 0x0260 - -#define MPMC_CTRL_AM ( 1 << 1 ) - -/* Dynamic Control register bits */ -#define MPMC_DC_CE ( 1 << 0 ) -#define MPMC_DC_DMC ( 1 << 1 ) -#define MPMC_DC_SRR ( 1 << 2 ) -#define MPMC_DC_SI_SHIFT 7 -#define MPMC_DC_SI_MASK ( 3 << 7 ) -#define MPMC_DC_SI_NORMAL ( 0 << 7 ) -#define MPMC_DC_SI_MODE ( 1 << 7 ) -#define MPMC_DC_SI_PALL ( 2 << 7 ) -#define MPMC_DC_SI_NOP ( 3 << 7 ) - -#define SRAM_REG_CONF 0x00 -#define SRAM_REG_WWE 0x04 -#define SRAM_REG_WOE 0x08 -#define SRAM_REG_WRD 0x0C -#define SRAM_REG_WPG 0x10 -#define SRAM_REG_WWR 0x14 -#define SRAM_REG_WTR 0x18 - -/* Dynamic Configuration register bits */ -#define DC_BE (1 << 19) /* buffer enable */ -#define DC_RW_SHIFT 28 /* shift for number of rows */ -#define DC_RW_MASK 0x03 -#define DC_NB_SHIFT 26 /* shift for number of banks */ -#define DC_NB_MASK 0x01 -#define DC_CW_SHIFT 22 /* shift for number of columns */ -#define DC_CW_MASK 0x07 -#define DC_DW_SHIFT 7 /* shift for device width */ -#define DC_DW_MASK 0x03 - -/* Static Configuration register bits */ -#define SC_MW_MASK 0x03 /* memory width mask */ -#define SC_MW_8 0x00 /* 8 bit memory width */ -#define SC_MW_16 0x01 /* 16 bit memory width */ -#define SC_MW_32 0x02 /* 32 bit memory width */ - -#endif /* _ADM5120_MPMC_H_ */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_platform.h deleted file mode 100644 index 81c76170f6..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_platform.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific platform definitions - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_PLATFORM_H_ -#define _ADM5120_PLATFORM_H_ - -#include -#include - -#include -#include -#include - -#include -#include - -struct adm5120_flash_platform_data { - void (*set_vpp)(struct map_info *, int); - void (*switch_bank)(unsigned); -#ifdef CONFIG_MTD_PARTITIONS - unsigned int nr_parts; - struct mtd_partition *parts; -#endif -}; - -struct adm5120_nand_platform_data { - /* TODO : not yet implemented */ -}; - -struct adm5120_switch_platform_data { - /* TODO: not yet implemented */ -}; - -struct adm5120_pci_irq { - u8 slot; - u8 func; - u8 pin; - unsigned irq; -}; - -struct adm5120_pci_platform_data { - unsigned int nr_irqs; - struct adm5120_pci_irq *irqs; -}; - -extern struct adm5120_flash_platform_data adm5120_flash0_data; -extern struct adm5120_flash_platform_data adm5120_flash1_data; -extern struct adm5120_nand_platform_data adm5120_nand_data; -extern struct adm5120_pci_platform_data adm5120_pci_data; -extern struct adm5120_switch_platform_data adm5120_switch_data; -extern struct amba_pl010_data adm5120_uart0_data; -extern struct amba_pl010_data adm5120_uart1_data; - -extern struct platform_device adm5120_flash0_device; -extern struct platform_device adm5120_flash1_device; -extern struct platform_device adm5120_nand_device; -extern struct platform_device adm5120_usbc_device; -extern struct platform_device adm5120_pci_device; -extern struct platform_device adm5120_switch_device; -extern struct amba_device adm5120_uart0_device; -extern struct amba_device adm5120_uart1_device; - - -#endif /* _ADM5120_PLATFORM_H_ */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h deleted file mode 100644 index eb06bfa602..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_switch.h +++ /dev/null @@ -1,148 +0,0 @@ -/* - * ADM5120 ethernet switch definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in Ethernet switch. - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_SWITCH_H -#define _ADM5120_SWITCH_H - -#define BITMASK(len) ((1 << (len))-1) -#define ONEBIT(at) (1 << (at)) - -/* Switch register offsets */ -#define SWITCH_REG_CODE 0x0000 -#define SWITCH_REG_SOFT_RESET 0x0004 -#define SWITCH_REG_MEMCTRL 0x001C -#define SWITCH_REG_CPUP_CONF 0x0024 -#define SWITCH_REG_PORT_CONF0 0x0028 -#define SWITCH_REG_PORT_CONF1 0x002C -#define SWITCH_REG_PORT_CONF2 0x0030 -#define SWITCH_REG_VLAN_G1 0x0040 -#define SWITCH_REG_VLAN_G2 0x0044 -#define SWITCH_REG_SEND_TRIG 0x0048 -#define SWITCH_REG_MAC_WT0 0x0058 -#define SWITCH_REG_MAC_WT1 0x005C -#define SWITCH_REG_PHY_CNTL0 0x0068 -#define SWITCH_REG_PHY_CNTL1 0x006C -#define SWITCH_REG_PHY_CNTL2 0x007C -#define SWITCH_REG_PHY_CNTL3 0x0080 -#define SWITCH_REG_PRI_CNTL 0x0084 -#define SWITCH_REG_INT_STATUS 0x00B0 -#define SWITCH_REG_INT_MASK 0x00B4 -#define SWITCH_REG_GPIO_CONF0 0x00B8 -#define SWITCH_REG_GPIO_CONF2 0x00BC -#define SWITCH_REG_WDOG0 0x00C0 -#define SWITCH_REG_WDOG1 0x00C4 -#define SWITCH_REG_PHY_CNTL4 0x00A0 - -#define SWITCH_REG_SEND_HBADDR 0x00D0 -#define SWITCH_REG_SEND_LBADDR 0x00D4 -#define SWITCH_REG_RECV_HBADDR 0x00D8 -#define SWITCH_REG_RECV_LBADDR 0x00DC - -#define SWITCH_REG_TIMER_INT 0x00F0 -#define SWITCH_REG_TIMER 0x00F4 - -#define SWITCH_REG_PORT0_LED 0x0100 -#define SWITCH_REG_PORT1_LED 0x0104 -#define SWITCH_REG_PORT2_LED 0x0108 -#define SWITCH_REG_PORT3_LED 0x010C -#define SWITCH_REG_PORT4_LED 0x0110 - -/* CODE register bits */ -#define CODE_PC_MASK BITMASK(16) /* Product Code */ -#define CODE_REV_SHIFT 16 -#define CODE_REV_MASK BITMASK(4) /* Product Revision */ -#define CODE_CLKS_SHIFT 20 -#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ -#define CODE_CLKS_175 0 /* 175 MHz */ -#define CODE_CLKS_200 1 /* 200 MHz */ -#define CODE_CLKS_225 2 /* 225 MHz */ -#define CODE_CLKS_250 3 /* 250 MHz */ -#define CODE_NAB ONEBIT(24) /* NAND boot */ -#define CODE_PK_MASK BITMASK(1) /* Package type */ -#define CODE_PK_SHIFT 29 -#define CODE_PK_BGA 0 /* BGA package */ -#define CODE_PK_PQFP 1 /* PQFP package */ - -/* MEMCTRL register bits */ -#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */ -#define MEMCTRL_SDRS_4M 0x01 -#define MEMCTRL_SDRS_8M 0x02 -#define MEMCTRL_SDRS_16M 0x03 -#define MEMCTRL_SDRS_64M 0x04 -#define MEMCTRL_SDRS_128M 0x05 -#define MEMCTRL_SDR1_ENABLE ONEBIT(5) /* enable SDRAM bank 1 */ - -#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */ -#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */ -#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */ -#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */ -#define MEMCTRL_SRS_512K 0x01 /* 512KB*/ -#define MEMCTRL_SRS_1M 0x02 /* 1MB */ -#define MEMCTRL_SRS_2M 0x03 /* 2MB */ -#define MEMCTRL_SRS_4M 0x04 /* 4MB */ - -/* GPIO_CONF0 register bits */ -#define GPIO_CONF0_MASK BITMASK(8) -#define GPIO_CONF0_IM_SHIFT 0 -#define GPIO_CONF0_IV_SHIFT 8 -#define GPIO_CONF0_OE_SHIFT 16 -#define GPIO_CONF0_OV_SHIFT 24 -#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT) -#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT) -#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) -#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) - -/* TIMER_INT register bits */ -#define TIMER_INT_TOS ONEBIT(1) /* time-out status */ -#define TIMER_INT_TOM ONEBIT(16) /* mask time-out interrupt */ - -/* TIMER register bits */ -#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */ -#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */ -#define TIMER_TE ONEBIT(16) /* timer enable bit */ - -/* PORTx_LED register bits */ -#define LED_MODE_MASK BITMASK(4) -#define LED_MODE_INPUT 0 -#define LED_MODE_FLASH 1 -#define LED_MODE_OUT_HIGH 2 -#define LED_MODE_OUT_LOW 3 -#define LED_MODE_LINK 4 -#define LED_MODE_SPEED 5 -#define LED_MODE_DUPLEX 6 -#define LED_MODE_ACT 7 -#define LED_MODE_COLL 8 -#define LED_MODE_LINK_ACT 9 -#define LED_MODE_DUPLEX_COLL 10 -#define LED_MODE_10M_ACT 11 -#define LED_MODE_100M_ACT 12 -#define LED0_MODE_SHIFT 0 /* LED0 mode shift */ -#define LED1_MODE_SHIFT 4 /* LED1 mode shift */ -#define LED2_MODE_SHIFT 8 /* LED2 mode shift */ -#define LED0_IV_SHIFT 12 /* LED0 input value shift */ -#define LED1_IV_SHIFT 13 /* LED1 input value shift */ -#define LED2_IV_SHIFT 14 /* LED2 input value shift */ - -#endif /* _ADM5120_SWITCH_H */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h deleted file mode 100755 index 89c48dee5a..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/adm5120_uart.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * ADM5120 UART definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in UARTs. - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ADM5120_UART_H_ -#define _ADM5120_UART_H_ - -#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1) - -#define UART_REG_DATA 0x00 -#define UART_REG_RSR 0x04 -#define UART_REG_ECR UART_REG_RSR -#define UART_REG_LCRH 0x08 -#define UART_REG_LCRM 0x0C -#define UART_REG_LCRL 0x10 -#define UART_REG_CTRL 0x14 -#define UART_REG_FLAG 0x18 - -/* Receive Status Register bits */ -#define UART_RSR_FE ( 1 << 0 ) -#define UART_RSR_PE ( 1 << 1 ) -#define UART_RSR_BE ( 1 << 2 ) -#define UART_RSR_OE ( 1 << 3 ) -#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE ) - -#define UART_ECR_ALL 0xFF - -/* Line Control High register bits */ -#define UART_LCRH_BRK ( 1 << 0 ) /* send break */ -#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */ -#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */ -#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */ -#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */ -#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ - -#define UART_LCRH_WLEN5 ( 0 << 5 ) -#define UART_LCRH_WLEN6 ( 1 << 5 ) -#define UART_LCRH_WLEN7 ( 2 << 5 ) -#define UART_LCRH_WLEN8 ( 3 << 5 ) - -/* Control register bits */ -#define UART_CTRL_EN ( 1 << 0 ) - -/* Flag register bits */ -#define UART_FLAG_CTS ( 1 << 0 ) -#define UART_FLAG_DSR ( 1 << 1 ) -#define UART_FLAG_DCD ( 1 << 2 ) -#define UART_FLAG_BUSY ( 1 << 3 ) -#define UART_FLAG_RXFE ( 1 << 4 ) -#define UART_FLAG_TXFF ( 1 << 5 ) -#define UART_FLAG_RXFF ( 1 << 6 ) -#define UART_FLAG_TXFE ( 1 << 7 ) - -#endif /* _ADM5120_UART_H_ */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/asm/sizes.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/asm/sizes.h deleted file mode 100644 index 503843db15..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/asm/sizes.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_16 0x00000010 -#define SZ_256 0x00000100 -#define SZ_512 0x00000200 - -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif - -/* END */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h deleted file mode 100644 index 6216b864f5..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * $Id$ - * - * ADM5120 specific CPU feature overrides - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ -#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H - -#ifdef CONFIG_ADM5120_CPU_OVERRIDES - -/* - * The ADM5120 SOC has a built-in MIPS 4Kc core. - */ -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 -/* #define cpu_has_vce ? */ -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -#define cpu_has_prefetch 1 -/* #define cpu_has_mcheck ? */ -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 - -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -/* #define cpu_has_pindexed_dcache ? */ - -/* #define cpu_icache_snoops_remote_store ? */ - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 - -/* #define cpu_has_nofpuex ? */ -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -/* #define cpu_has_inclusive_pcaches ? */ - -#define cpu_dcache_line_size() 16 -#define cpu_icache_line_size() 16 - -#endif /* CONFIG_ADM5120_CPU_OVERRIDES */ - - -#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/gpio.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/gpio.h deleted file mode 100644 index 684d86cd41..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/gpio.h +++ /dev/null @@ -1,126 +0,0 @@ -/* - * $Id$ - * - * ADM5120 GPIO wrappers for arch-neutral GPIO calls - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#ifndef _ADM5120_GPIO_H_ -#define _ADM5120_GPIO_H_ - -#include - -#define ADM5120_GPIO_PIN0 0 -#define ADM5120_GPIO_PIN1 1 -#define ADM5120_GPIO_PIN2 2 -#define ADM5120_GPIO_PIN3 3 -#define ADM5120_GPIO_PIN4 4 -#define ADM5120_GPIO_PIN5 5 -#define ADM5120_GPIO_PIN6 6 -#define ADM5120_GPIO_PIN7 7 -#define ADM5120_GPIO_P0L0 8 -#define ADM5120_GPIO_P0L1 9 -#define ADM5120_GPIO_P0L2 10 -#define ADM5120_GPIO_P1L0 11 -#define ADM5120_GPIO_P1L1 12 -#define ADM5120_GPIO_P1L2 13 -#define ADM5120_GPIO_P2L0 14 -#define ADM5120_GPIO_P2L1 15 -#define ADM5120_GPIO_P2L2 16 -#define ADM5120_GPIO_P3L0 17 -#define ADM5120_GPIO_P3L1 18 -#define ADM5120_GPIO_P3L2 19 -#define ADM5120_GPIO_P4L0 20 -#define ADM5120_GPIO_P4L1 21 -#define ADM5120_GPIO_P4L2 22 -#define ADM5120_GPIO_MAX 22 -#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1 - -#define ADM5120_GPIO_LOW 0 -#define ADM5120_GPIO_HIGH 1 - -#define ADM5120_GPIO_SWITCH 0x10 -#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH) -#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK) -#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED) -#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX) -#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT) -#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL) -#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT) -#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL) -#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT) -#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT) - -extern int adm5120_gpio_direction_input(unsigned gpio); -extern int adm5120_gpio_direction_output(unsigned gpio, int value); -extern int adm5120_gpio_get_value(unsigned gpio); -extern void adm5120_gpio_set_value(unsigned gpio, int value); -extern int adm5120_gpio_request(unsigned gpio, const char *label); -extern void adm5120_gpio_free(unsigned gpio); -extern int adm5120_gpio_to_irq(unsigned gpio); -extern int adm5120_irq_to_gpio(unsigned irq); - -/* - * Wrappers for the generic GPIO layer - */ -static inline int gpio_direction_input(unsigned gpio) -{ - return adm5120_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return adm5120_gpio_direction_output(gpio,value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return adm5120_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - adm5120_gpio_set_value(gpio, value); -} - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return adm5120_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - adm5120_gpio_free(gpio); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return adm5120_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return adm5120_irq_to_gpio(irq); -} - -#include /* cansleep wrappers */ - -#endif diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/cfe.h deleted file mode 100644 index 7d202361ac..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/cfe.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * $Id$ - * - * Broadcom's CFE definitions - * - * Copyright (C) 2006,2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _PROM_CFE_H_ -#define _PROM_CFE_H_ - -extern int cfe_present(void) __init; -extern char *cfe_getenv(char *); - -#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/generic.h deleted file mode 100644 index 2cfa103672..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/generic.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * $Id$ - * - * Generic prom definitions - * - * Copyright (C) 2006,2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _PROM_GENERIC_H_ -#define _PROM_GENERIC_H_ - -extern int generic_prom_present(void) __init; -extern char *generic_prom_getenv(char *); - -#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/myloader.h deleted file mode 100644 index 526de865c9..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/myloader.h +++ /dev/null @@ -1,191 +0,0 @@ -/* - * $Id$ - * - * Compex's MyLoader specific definitions - * - * Copyright (C) 2006,2007 Gabor Juhos - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _MYLOADER_H_ -#define _MYLOADER_H_ - -/* - * Firmware file format: - * - *
- * [] - * ... - * [] - * - * [] - * ... - * [] - * - * - */ - -/* Myloader specific magic numbers */ -#define MYLO_MAGIC_FIRMWARE 0x4C594D00 -#define MYLO_MAGIC_20021103 0x20021103 -#define MYLO_MAGIC_20021107 0x20021107 - -#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 -#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 -#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 - -/* - * Addresses of the data structures provided by MyLoader - */ -#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ -#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ -#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ -#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ - -/* Vendor ID's (seems to be same as the PCI vendor ID's) */ -#define VENID_COMPEX 0x11F6 - -/* Devices based on the ADM5120 */ -#define DEVID_COMPEX_NP27G 0x0078 -#define DEVID_COMPEX_NP28G 0x044C -#define DEVID_COMPEX_NP28GHS 0x044E -#define DEVID_COMPEX_WP54Gv1C 0x0514 -#define DEVID_COMPEX_WP54G 0x0515 -#define DEVID_COMPEX_WP54AG 0x0546 -#define DEVID_COMPEX_WPP54AG 0x0550 -#define DEVID_COMPEX_WPP54G 0x0555 - -/* Devices based on the IXP422 */ -#define DEVID_COMPEX_WP18 0x047E -#define DEVID_COMPEX_NP18A 0x0489 - -/* Other devices */ -#define DEVID_COMPEX_NP26G8M 0x03E8 -#define DEVID_COMPEX_NP26G16M 0x03E9 - -struct mylo_fw_header { - uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ - uint32_t crc; /* CRC of the whole firmware */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint16_t vid; /* vendor ID */ - uint16_t did; /* device ID */ - uint16_t svid; /* sub vendor ID */ - uint16_t sdid; /* sub device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; /* FIXME: firmware version high? */ - uint32_t fwlo; /* FIXME: firmware version low? */ - uint32_t flags; /* firmware flags */ -}; - -#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ -#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ - -struct mylo_fw_blockdesc { - uint32_t type; /* block type */ - uint32_t addr; /* relative address to flash start */ - uint32_t dlen; /* size of block data in bytes */ - uint32_t blen; /* total size of block in bytes */ -}; - -#define FW_DESC_TYPE_UNUSED 0 -#define FW_DESC_TYPE_USED 1 - -struct mylo_partition { - uint16_t flags; /* partition flags */ - uint16_t type; /* type of the partition */ - uint32_t addr; /* relative address of the partition from the - flash start */ - uint32_t size; /* size of the partition in bytes */ - uint32_t param; /* if this is the active partition, the - MyLoader load code to this address */ -}; - -#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, - * MyLoader loads firmware from here */ -#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ -#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ -#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM - * before decompression */ -#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ - -#define PARTITION_TYPE_FREE 0 -#define PARTITION_TYPE_USED 1 - -#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the - partition table */ - -struct mylo_partition_table { - uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint32_t res2; /* unknown/unused */ - struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; -}; - -struct mylo_partition_header { - uint32_t len; /* length of the partition data */ - uint32_t crc; /* CRC value of the partition data */ -}; - -struct mylo_system_params { - uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t mylo_ver; - uint16_t vid; /* Vendor ID */ - uint16_t did; /* Device ID */ - uint16_t svid; /* Sub Vendor ID */ - uint16_t sdid; /* Sub Device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; - uint32_t fwlo; - uint32_t tftp_addr; - uint32_t prog_start; - uint32_t flash_size; /* Size of boot FLASH in bytes */ - uint32_t dram_size; /* Size of onboard RAM in bytes */ -}; - - -struct mylo_eth_addr { - uint8_t mac[6]; - uint8_t csum[2]; -}; - -#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address - in the board parameters */ - -struct mylo_board_params { - uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t res2; - struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; -}; - -struct myloader_info { - u32 vid; - u32 did; - u32 svid; - u32 sdid; -}; - -extern struct myloader_info myloader_info; -extern int myloader_present(void) __init; - -#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h deleted file mode 100644 index 3c0898b3de..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/routerboot.h +++ /dev/null @@ -1,137 +0,0 @@ -/* - * $Id$ - * - * Mikrotik's RouterBOOT definitions - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ROUTERBOOT_H -#define _ROUTERBOOT_H - -#define RB_MAC_SIZE 6 -#define RB_MAX_MAC_COUNT 6 - -struct rb_bios_settings { - u32 hs_offs; /* hard settings offset */ - u32 hs_size; /* hard settings size */ - u32 fw_offs; /* firmware offset */ - u32 ss_offs; /* soft settings offset */ - u32 ss_size; /* soft settings size */ -}; - -struct rb_hard_settings { - char *name; /* board name */ - char *bios_ver; /* BIOS version */ - u32 mem_size; /* memory size in bytes */ - u32 mac_count; /* number of mac addresses */ - u8 macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */ -}; - -/* - * Magic numbers - */ -#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ -#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ -#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ - -#define RB_ID_TERMINATOR 0 - -/* - * ID values for Hardware settings - */ -#define RB_ID_HARD_01 1 -#define RB_ID_HARD_02 2 -#define RB_ID_FLASH_INFO 3 -#define RB_ID_MAC_ADDRESS_PACK 4 -#define RB_ID_BOARD_NAME 5 -#define RB_ID_BIOS_VERSION 6 -#define RB_ID_HARD_07 7 -#define RB_ID_SDRAM_TIMINGS 8 -#define RB_ID_DEVICE_TIMINGS 9 -#define RB_ID_SOFTWARE_ID 10 -#define RB_ID_SERIAL_NUMBER 11 -#define RB_ID_HARD_12 12 -#define RB_ID_MEMORY_SIZE 13 -#define RB_ID_MAC_ADDRESS_COUNT 14 - -/* - * ID values for Software settings - */ -#define RB_ID_UART_SPEED 1 -#define RB_ID_BOOT_DELAY 2 -#define RB_ID_BOOT_DEVICE 3 -#define RB_ID_BOOT_KEY 4 -#define RB_ID_CPU_MODE 5 -#define RB_ID_FW_VERSION 6 -#define RB_ID_SOFT_07 7 -#define RB_ID_SOFT_08 8 -#define RB_ID_BOOT_PROTOCOL 9 -#define RB_ID_SOFT_10 10 -#define RB_ID_SOFT_11 11 - -/* - * UART_SPEED values - */ -#define RB_UART_SPEED_115200 0 -#define RB_UART_SPEED_57600 1 -#define RB_UART_SPEED_38400 2 -#define RB_UART_SPEED_19200 3 -#define RB_UART_SPEED_9600 4 -#define RB_UART_SPEED_4800 5 -#define RB_UART_SPEED_2400 6 -#define RB_UART_SPEED_1200 7 - -/* - * BOOT_DELAY values - */ -#define RB_BOOT_DELAY_0SEC 0 -#define RB_BOOT_DELAY_1SEC 1 -#define RB_BOOT_DELAY_2SEC 2 - -/* - * BOOT_DEVICE values - */ -#define RB_BOOT_DEVICE_ETHER 0 -#define RB_BOOT_DEVICE_NANDETH 1 -#define RB_BOOT_DEVICE_ETHONCE 2 -#define RB_BOOT_DEVICE_NANDONLY 3 - -/* - * BOOT_KEY values - */ -#define RB_BOOT_KEY_ANY 0 -#define RB_BOOT_KEY_DEL 1 - -/* - * CPU_MODE values - */ -#define RB_CPU_MODE_POWERSAVE 0 -#define RB_CPU_MODE_REGULAR 1 - -/* - * BOOT_PROTOCOL values - */ -#define RB_BOOT_PROTOCOL_BOOTP 0 -#define RB_BOOT_PROTOCOL_DHCP 1 - -extern int routerboot_present(void) __init; -extern char *routerboot_get_boardname(void); - -#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/zynos.h deleted file mode 100644 index e9471b5ad4..0000000000 --- a/target/linux/adm5120-2.6/files/include/asm-mips/mach-adm5120/prom/zynos.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * $Id$ - * - * ZyNOS (ZyXEL's Networking OS) definitions - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#ifndef _ZYNOS_H -#define _ZYNOS_H - -#define ZYNOS_NAME_LEN 32 -#define ZYNOS_FEAT_BYTES 22 -#define ZYNOS_MAC_LEN 6 - -struct zynos_board_info { - unsigned char vendor[ZYNOS_NAME_LEN]; - unsigned char product[ZYNOS_NAME_LEN]; - u32 bootext_addr; - u32 res0; - u16 board_id; - u8 res1[6]; - u8 feat_other[ZYNOS_FEAT_BYTES]; - u8 feat_main; - u8 res2; - u8 mac[ZYNOS_MAC_LEN]; - u8 country; - u8 dbgflag; -} __attribute__ ((packed)); - -/* - * Vendor IDs - */ -#define ZYNOS_VENDOR_ID_ZYXEL 0 -#define ZYNOS_VENDOR_ID_NETGEAR 1 -#define ZYNOS_VENDOR_ID_DLINK 2 -#define ZYNOS_VENDOR_ID_OTHER 3 -#define ZYNOS_VENDOR_ID_LUCENT 4 - -/* - * Vendor names - */ -#define ZYNOS_VENDOR_DLINK "D-Link" -#define ZYNOS_VENDOR_LUCENT "LUCENT" -#define ZYNOS_VENDOR_NETGEAR "NetGear" -#define ZYNOS_VENDOR_ZYXEL "ZyXEL" - -/* - * Board IDs (big-endian) - */ -#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ -#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ -#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ -#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ -#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ -#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ -#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ -#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ -#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ -#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ -#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ -#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ -#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ -#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ -#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ - -/* - * Some magic numbers (big-endian) - */ -#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ -#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ - -struct bootbase_info { - u16 vendor_id; - u16 board_id; - u8 mac[6]; -}; - -extern struct bootbase_info bootbase_info; -extern int bootbase_present(void) __init; - -#endif /* _ZYNOS_H */ diff --git a/target/linux/adm5120-2.6/files/include/linux/gpio_leds.h b/target/linux/adm5120-2.6/files/include/linux/gpio_leds.h deleted file mode 100644 index 5e78217b5f..0000000000 --- a/target/linux/adm5120-2.6/files/include/linux/gpio_leds.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * $Id$ - * - * GPIO LEDs platform data structure - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#ifndef _GPIO_LEDS_H_ -#define _GPIO_LEDS_H_ - -struct gpio_led_platform_data { - char *name; - char *trigger; - unsigned gpio; /* GPIO line number */ - int value_off; /* value to turn LED OFF */ - int value_on; /* value to turn LED ON */ -}; - -#endif /* _GPIO_LEDS_H__ */ diff --git a/target/linux/adm5120-2.6/image/Makefile b/target/linux/adm5120-2.6/image/Makefile deleted file mode 100644 index 77b1c89754..0000000000 --- a/target/linux/adm5120-2.6/image/Makefile +++ /dev/null @@ -1,177 +0,0 @@ -# -# Copyright (C) 2006,2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -IMGNAME = $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL) -LOADER_MAKE = $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) - -define Image/Build/Loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) LOADER_DATA="" \ - LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ - CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ - compile loader.$(2) -endef - -define Build/Clean - $(LOADER_MAKE) clean -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma -endef - -define trxalign/jffs2-128k --a 0x20000 -endef -define trxalign/jffs2-64k --a 0x10000 -endef -define trxalign/squashfs --a 1024 -endef - -define Image/Build/TRX - $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(3) -f $(KDIR)/vmlinux.lzma \ - $(call trxalign/$(2)) -f $(KDIR)/root.$(2) -endef - -define Image/Build/TRXNoloader - $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(KDIR)/vmlinux.lzma \ - $(call trxalign/$(2)) -f $(KDIR)/root.$(2) -endef - -define Image/Build/Compex - $(call Image/Build/Loader,$(2),gz,0x80500000,0,y,$(2)) - $(call Image/Build/TRX,$(IMGNAME)-$(3)-$(2).trx,$(1),$(KDIR)/loader-$(2).gz) -endef - -define Image/Build/Edimax - $(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2)) - $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) - $(STAGING_DIR_HOST)/bin/mkcsysimg -B $(2) -d -w \ - -r $(KDIR)/loader-$(2).gz \ - -x $(IMGNAME)-$(3)-$(2).trx \ - $(IMGNAME)-$(3)-$(2).bin -endef - -define Image/Build/Infineon - $(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2)) - $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) - dd if=$(KDIR)/loader-$(2).gz of=$(IMGNAME)-$(3)-$(2).img bs=64k conv=sync - cat $(IMGNAME)-$(3)-$(2).trx >>$(IMGNAME)-$(3)-$(2).img -endef - -define Image/Build/MyLoader - $(call Image/Build/Loader,$(2),gz,0x80500000,0) - $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) - $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) \ - -p0x20000:0x10000:ahp:0x80001000 \ - -p0x30000:0 \ - -b0x20000:0x10000:h:$(KDIR)/loader-$(2).gz \ - -b0x30000:0::$(IMGNAME)-$(3)-$(2).trx \ - $(IMGNAME)-$(3)-$(2).bin -endef - -define Image/cmdline/yaffs2 -root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit -endef - -define Image/Build/RouterBoard - $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) ' -endef - -define Image/Build/jffs2-64k - $(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1))) -ifeq ($(CONFIG_DEVEL),y) - $(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524k,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524kp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6541k,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6541kp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ew-7207apg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ps-1205uwg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ps-3205u,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),ps-3205uwg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524wg,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Edimax,$(1),br-6524wp,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-5120p-ata,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-5120-wvoip,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/Infineon,$(1),easy-83000,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),np27g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),np28g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),np28ghs,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wp54g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wp54ag,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wpp54g,$(patsubst jffs2-%,jffs2,$(1))) - $(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1))) -endif -endef - -define Image/Build/squashfs -$(call Image/Build/jffs2-64k,$(1)) -endef - -define Image/Build -$(call Image/Build/$(1),$(1)) -endef - -ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) - define Image/BuildKernel - $(call Image/Build/RouterBoard) - endef -endif - -define Image/Build/LZMAKernel - $(LOADER_MAKE) TARGET_DIR=$(BIN_DIR) \ - LOADER=openwrt-$(BOARD)-$(KERNEL)-ramfs-lzma-$(1).$(2) \ - LOADER_DATA=$(KDIR)/vmlinux.lzma \ - LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ - CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ - compile loader.$(2) -endef - -define Image/Build/LZMAKernel/Compex - $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0,y,$(1)) -endef - -define Image/Build/LZMAKernel/Generic - $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0) -endef - -define Image/Build/LZMAKernel/Admboot - $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1)) -endef - -define Image/Build/Initramfs/RouterBoard - $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf -endef - -define Image/Build/Initramfs - $(call Image/Build/Initramfs/RouterBoard) - $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin) -ifeq ($(CONFIG_DEVEL),y) - $(call Image/Build/LZMAKernel/Generic,generic,bin) - $(call Image/Build/LZMAKernel/Generic,np27g,bin) - $(call Image/Build/LZMAKernel/Generic,wp54g,bin) - $(call Image/Build/LZMAKernel/Admboot,br-6104k,gz) - $(call Image/Build/LZMAKernel/Admboot,easy-5120,gz) - $(call Image/Build/LZMAKernel/Admboot,easy-83000,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-630,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-670,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-700,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-771,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-790,gz) - $(call Image/Build/LZMAKernel/Admboot,cas-861,gz) -endif -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/adm5120-2.6/image/lzma-loader/Makefile b/target/linux/adm5120-2.6/image/lzma-loader/Makefile deleted file mode 100644 index 74866e765e..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/Makefile +++ /dev/null @@ -1,63 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id$ - -include $(TOPDIR)/rules.mk - -LOADER := loader.bin -LOADER_NAME := $(basename $(notdir $(LOADER))) -LOADER_DATA := -TARGET_DIR := - -ifeq ($(TARGET_DIR),) -TARGET_DIR := $(KDIR) -endif - -LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin -LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz -LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf - -LZMA_STARTUP_ORG:= 0 -LZMA_TEXT_START := 0x80300000 - -PKG_NAME := lzma-loader -PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) - -.PHONY : loader-compile loader.bin loader.elf loader.gz - -$(PKG_BUILD_DIR)/.prepared: - mkdir $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ - touch $@ - -loader-compile: $(PKG_BUILD_DIR)/.prepared - $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ - LZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) \ - LZMA_TEXT_START=$(LZMA_TEXT_START) \ - LOADER_DATA=$(LOADER_DATA) \ - CONFIG_BOARD=$(CONFIG_BOARD) \ - CONFIG_PASS_KARGS=$(CONFIG_PASS_KARGS) \ - clean all - -loader.gz: $(PKG_BUILD_DIR)/loader.bin - gzip -nc9 $< > $(LOADER_GZ) - -loader.elf: $(PKG_BUILD_DIR)/loader.elf - $(CP) $< $(LOADER_ELF) - -loader.bin: $(PKG_BUILD_DIR)/loader.bin - $(CP) $< $(LOADER_BIN) - -download: -prepare: $(PKG_BUILD_DIR)/.prepared -compile: loader-compile - -install: - -clean: - rm -rf $(PKG_BUILD_DIR) - diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.c deleted file mode 100644 index 75a358a9ee..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.c +++ /dev/null @@ -1,589 +0,0 @@ -/* - LzmaDecode.c - LZMA Decoder (optimized for Speed version) - - LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this Code, expressly permits you to - statically or dynamically link your Code (or bind by name) to the - interfaces of this file without subjecting your linked Code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#include "LzmaDecode.h" - -#ifndef Byte -#define Byte unsigned char -#endif - -#define kNumTopBits 24 -#define kTopValue ((UInt32)1 << kNumTopBits) - -#define kNumBitModelTotalBits 11 -#define kBitModelTotal (1 << kNumBitModelTotalBits) -#define kNumMoveBits 5 - -#define RC_READ_BYTE (*Buffer++) - -#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ - { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} - -#ifdef _LZMA_IN_CB - -#define RC_TEST { if (Buffer == BufferLim) \ - { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ - BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} - -#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 - -#else - -#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } - -#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 - -#endif - -#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } - -#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) -#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; -#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; - -#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ - { UpdateBit0(p); mi <<= 1; A0; } else \ - { UpdateBit1(p); mi = (mi + mi) + 1; A1; } - -#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) - -#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ - { int i = numLevels; res = 1; \ - do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ - res -= (1 << numLevels); } - - -#define kNumPosBitsMax 4 -#define kNumPosStatesMax (1 << kNumPosBitsMax) - -#define kLenNumLowBits 3 -#define kLenNumLowSymbols (1 << kLenNumLowBits) -#define kLenNumMidBits 3 -#define kLenNumMidSymbols (1 << kLenNumMidBits) -#define kLenNumHighBits 8 -#define kLenNumHighSymbols (1 << kLenNumHighBits) - -#define LenChoice 0 -#define LenChoice2 (LenChoice + 1) -#define LenLow (LenChoice2 + 1) -#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) -#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) -#define kNumLenProbs (LenHigh + kLenNumHighSymbols) - - -#define kNumStates 12 -#define kNumLitStates 7 - -#define kStartPosModelIndex 4 -#define kEndPosModelIndex 14 -#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) - -#define kNumPosSlotBits 6 -#define kNumLenToPosStates 4 - -#define kNumAlignBits 4 -#define kAlignTableSize (1 << kNumAlignBits) - -#define kMatchMinLen 2 - -#define IsMatch 0 -#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) -#define IsRepG0 (IsRep + kNumStates) -#define IsRepG1 (IsRepG0 + kNumStates) -#define IsRepG2 (IsRepG1 + kNumStates) -#define IsRep0Long (IsRepG2 + kNumStates) -#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) -#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) -#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) -#define LenCoder (Align + kAlignTableSize) -#define RepLenCoder (LenCoder + kNumLenProbs) -#define Literal (RepLenCoder + kNumLenProbs) - -#if Literal != LZMA_BASE_SIZE -StopCompilingDueBUG -#endif - -#ifdef _LZMA_OUT_READ - -typedef struct _LzmaVarState -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback; - #endif - Byte *Dictionary; - UInt32 DictionarySize; - UInt32 DictionaryPos; - UInt32 GlobalPos; - UInt32 Reps[4]; - int lc; - int lp; - int pb; - int State; - int RemainLen; - Byte TempDictionary[4]; -} LzmaVarState; - -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback - #else - unsigned char *inStream, UInt32 inSize - #endif - ) -{ - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - LzmaVarState *vs = (LzmaVarState *)buffer; - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - UInt32 i; - if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - vs->Dictionary = dictionary; - vs->DictionarySize = dictionarySize; - vs->DictionaryPos = 0; - vs->GlobalPos = 0; - vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; - vs->lc = lc; - vs->lp = lp; - vs->pb = pb; - vs->State = 0; - vs->RemainLen = 0; - dictionary[dictionarySize - 1] = 0; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - vs->Range = Range; - vs->Code = Code; - #ifdef _LZMA_IN_CB - vs->InCallback = InCallback; - #endif - - return LZMA_RESULT_OK; -} - -int LzmaDecode(unsigned char *buffer, - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - LzmaVarState *vs = (LzmaVarState *)buffer; - Byte *Buffer = vs->Buffer; - Byte *BufferLim = vs->BufferLim; - UInt32 Range = vs->Range; - UInt32 Code = vs->Code; - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback = vs->InCallback; - #endif - CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); - int state = vs->State; - Byte previousByte; - UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << (vs->pb)) - 1; - UInt32 literalPosMask = (1 << (vs->lp)) - 1; - int lc = vs->lc; - int len = vs->RemainLen; - UInt32 globalPos = vs->GlobalPos; - - Byte *dictionary = vs->Dictionary; - UInt32 dictionarySize = vs->DictionarySize; - UInt32 dictionaryPos = vs->DictionaryPos; - - Byte tempDictionary[4]; - if (dictionarySize == 0) - { - dictionary = tempDictionary; - dictionarySize = 1; - tempDictionary[0] = vs->TempDictionary[0]; - } - - if (len == -1) - { - *outSizeProcessed = 0; - return LZMA_RESULT_OK; - } - - while(len != 0 && nowPos < outSize) - { - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - len--; - } - if (dictionaryPos == 0) - previousByte = dictionary[dictionarySize - 1]; - else - previousByte = dictionary[dictionaryPos - 1]; -#else - -int LzmaDecode( - Byte *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *InCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); - CProb *p = (CProb *)buffer; - - UInt32 i; - int state = 0; - Byte previousByte = 0; - UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; - UInt32 nowPos = 0; - UInt32 posStateMask = (1 << pb) - 1; - UInt32 literalPosMask = (1 << lp) - 1; - int len = 0; - - Byte *Buffer; - Byte *BufferLim; - UInt32 Range; - UInt32 Code; - - if (bufferSize < numProbs * sizeof(CProb)) - return LZMA_RESULT_NOT_ENOUGH_MEM; - for (i = 0; i < numProbs; i++) - p[i] = kBitModelTotal >> 1; - - - #ifdef _LZMA_IN_CB - RC_INIT; - #else - RC_INIT(inStream, inSize); - #endif -#endif - - *outSizeProcessed = 0; - while(nowPos < outSize) - { - CProb *prob; - UInt32 bound; - int posState = (int)( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & posStateMask); - - prob = p + IsMatch + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - int symbol = 1; - UpdateBit0(prob) - prob = p + Literal + (LZMA_LIT_SIZE * - ((( - (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - ) - & literalPosMask) << lc) + (previousByte >> (8 - lc)))); - - if (state >= kNumLitStates) - { - int matchByte; - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - matchByte = dictionary[pos]; - #else - matchByte = outStream[nowPos - rep0]; - #endif - // prob += 0x100; - do - { - int bit; - CProb *probLit; - matchByte <<= 1; - bit = (matchByte & 0x100); - probLit = prob + 0x100 + bit + symbol; - RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) - } - while (symbol < 0x100); - // prob -= 0x100; - } - while (symbol < 0x100) - { - CProb *probLit = prob + symbol; - RC_GET_BIT(probLit, symbol) - } - previousByte = (Byte)symbol; - - outStream[nowPos++] = previousByte; - #ifdef _LZMA_OUT_READ - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #endif - if (state < 4) state = 0; - else if (state < 10) state -= 3; - else state -= 6; - } - else - { - // int isItRep; - UpdateBit1(prob); - prob = p + IsRep + state; - IfBit0(prob) - { - UpdateBit0(prob); - rep3 = rep2; - rep2 = rep1; - rep1 = rep0; - state = state < kNumLitStates ? 0 : 3; - prob = p + LenCoder; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG0 + state; - IfBit0(prob) - { - UpdateBit0(prob); - prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; - IfBit0(prob) - { - #ifdef _LZMA_OUT_READ - UInt32 pos; - #endif - UpdateBit0(prob); - if (nowPos - #ifdef _LZMA_OUT_READ - + globalPos - #endif - == 0) - return LZMA_RESULT_DATA_ERROR; - state = state < kNumLitStates ? 9 : 11; - #ifdef _LZMA_OUT_READ - pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - outStream[nowPos++] = previousByte; - continue; - } - else - { - UpdateBit1(prob); - } - } - else - { - UInt32 distance; - UpdateBit1(prob); - prob = p + IsRepG1 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep1; - } - else - { - UpdateBit1(prob); - prob = p + IsRepG2 + state; - IfBit0(prob) - { - UpdateBit0(prob); - distance = rep2; - } - else - { - UpdateBit1(prob); - distance = rep3; - rep3 = rep2; - } - rep2 = rep1; - } - rep1 = rep0; - rep0 = distance; - } - state = state < kNumLitStates ? 8 : 11; - prob = p + RepLenCoder; - } - { - int numBits, offset; - CProb *probLen = prob + LenChoice; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenLow + (posState << kLenNumLowBits); - offset = 0; - numBits = kLenNumLowBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenChoice2; - IfBit0(probLen) - { - UpdateBit0(probLen); - probLen = prob + LenMid + (posState << kLenNumMidBits); - offset = kLenNumLowSymbols; - numBits = kLenNumMidBits; - } - else - { - UpdateBit1(probLen); - probLen = prob + LenHigh; - offset = kLenNumLowSymbols + kLenNumMidSymbols; - numBits = kLenNumHighBits; - } - } - RangeDecoderBitTreeDecode(probLen, numBits, len); - len += offset; - } - - if (state < 4) - { - int posSlot; - state += kNumLitStates; - prob = p + PosSlot + - ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << - kNumPosSlotBits); - RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); - if (posSlot >= kStartPosModelIndex) - { - int numDirectBits = ((posSlot >> 1) - 1); - rep0 = (2 | ((UInt32)posSlot & 1)); - if (posSlot < kEndPosModelIndex) - { - rep0 <<= numDirectBits; - prob = p + SpecPos + rep0 - posSlot - 1; - } - else - { - numDirectBits -= kNumAlignBits; - do - { - RC_NORMALIZE - Range >>= 1; - rep0 <<= 1; - if (Code >= Range) - { - Code -= Range; - rep0 |= 1; - } - } - while (--numDirectBits != 0); - prob = p + Align; - rep0 <<= kNumAlignBits; - numDirectBits = kNumAlignBits; - } - { - int i = 1; - int mi = 1; - do - { - CProb *prob3 = prob + mi; - RC_GET_BIT2(prob3, mi, ; , rep0 |= i); - i <<= 1; - } - while(--numDirectBits != 0); - } - } - else - rep0 = posSlot; - if (++rep0 == (UInt32)(0)) - { - /* it's for stream version */ - len = -1; - break; - } - } - - len += kMatchMinLen; - if (rep0 > nowPos - #ifdef _LZMA_OUT_READ - + globalPos || rep0 > dictionarySize - #endif - ) - return LZMA_RESULT_DATA_ERROR; - do - { - #ifdef _LZMA_OUT_READ - UInt32 pos = dictionaryPos - rep0; - if (pos >= dictionarySize) - pos += dictionarySize; - previousByte = dictionary[pos]; - dictionary[dictionaryPos] = previousByte; - if (++dictionaryPos == dictionarySize) - dictionaryPos = 0; - #else - previousByte = outStream[nowPos - rep0]; - #endif - len--; - outStream[nowPos++] = previousByte; - } - while(len != 0 && nowPos < outSize); - } - } - RC_NORMALIZE; - - #ifdef _LZMA_OUT_READ - vs->Buffer = Buffer; - vs->BufferLim = BufferLim; - vs->Range = Range; - vs->Code = Code; - vs->DictionaryPos = dictionaryPos; - vs->GlobalPos = globalPos + nowPos; - vs->Reps[0] = rep0; - vs->Reps[1] = rep1; - vs->Reps[2] = rep2; - vs->Reps[3] = rep3; - vs->State = state; - vs->RemainLen = len; - vs->TempDictionary[0] = tempDictionary[0]; - #endif - - *outSizeProcessed = nowPos; - return LZMA_RESULT_OK; -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.h deleted file mode 100644 index 53677350ae..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/LzmaDecode.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - LzmaDecode.h - LZMA Decoder interface - - LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18) - http://www.7-zip.org/ - - LZMA SDK is licensed under two licenses: - 1) GNU Lesser General Public License (GNU LGPL) - 2) Common Public License (CPL) - It means that you can select one of these two licenses and - follow rules of that license. - - SPECIAL EXCEPTION: - Igor Pavlov, as the author of this code, expressly permits you to - statically or dynamically link your code (or bind by name) to the - interfaces of this file without subjecting your linked code to the - terms of the CPL or GNU LGPL. Any modifications or additions - to this file, however, are subject to the LGPL or CPL terms. -*/ - -#ifndef __LZMADECODE_H -#define __LZMADECODE_H - -/* #define _LZMA_IN_CB */ -/* Use callback for input data */ - -/* #define _LZMA_OUT_READ */ -/* Use read function for output data */ - -/* #define _LZMA_PROB32 */ -/* It can increase speed on some 32-bit CPUs, - but memory usage will be doubled in that case */ - -/* #define _LZMA_LOC_OPT */ -/* Enable local speed optimizations inside code */ - -#ifndef UInt32 -#ifdef _LZMA_UINT32_IS_ULONG -#define UInt32 unsigned long -#else -#define UInt32 unsigned int -#endif -#endif - -#ifdef _LZMA_PROB32 -#define CProb UInt32 -#else -#define CProb unsigned short -#endif - -#define LZMA_RESULT_OK 0 -#define LZMA_RESULT_DATA_ERROR 1 -#define LZMA_RESULT_NOT_ENOUGH_MEM 2 - -#ifdef _LZMA_IN_CB -typedef struct _ILzmaInCallback -{ - int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); -} ILzmaInCallback; -#endif - -#define LZMA_BASE_SIZE 1846 -#define LZMA_LIT_SIZE 768 - -/* -bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) -bufferSize += 100 in case of _LZMA_OUT_READ -by default CProb is unsigned short, -but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) -*/ - -#ifdef _LZMA_OUT_READ -int LzmaDecoderInit( - unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, - unsigned char *dictionary, UInt32 dictionarySize, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback - #else - unsigned char *inStream, UInt32 inSize - #endif -); -#endif - -int LzmaDecode( - unsigned char *buffer, - #ifndef _LZMA_OUT_READ - UInt32 bufferSize, - int lc, int lp, int pb, - #ifdef _LZMA_IN_CB - ILzmaInCallback *inCallback, - #else - unsigned char *inStream, UInt32 inSize, - #endif - #endif - unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#endif diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile b/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile deleted file mode 100644 index a553b7fdef..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/Makefile +++ /dev/null @@ -1,99 +0,0 @@ -# -# Makefile for Broadcom BCM947XX boards -# -# Copyright 2001-2003, Broadcom Corporation -# All Rights Reserved. -# -# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY -# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM -# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS -# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. -# -# Copyright 2004 Manuel Novoa III -# Modified to support bzip'd kernels. -# Of course, it would be better to integrate bunzip capability into CFE. -# -# Copyright 2005 Oleg I. Vdovikin -# Cleaned up, modified for lzma support, removed from kernel -# -# Copyright 2007 Gabor Juhos -# Modified to support user defined entry point address. -# Added support for make targets with different names -# - -LOADADDR := 0x80001000 -LZMA_TEXT_START := 0x80500000 -LZMA_STARTUP_ORG:= 0 -LOADER_DATA := -CONFIG_PASS_KARGS := -CONFIG_BOARD := - -CC := $(CROSS_COMPILE)gcc -LD := $(CROSS_COMPILE)ld -OBJCOPY := $(CROSS_COMPILE)objcopy -OBJDUMP := $(CROSS_COMPILE)objdump - -BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug -S - -CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -ffunction-sections -pipe -mlong-calls -fno-common \ - -ffreestanding \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap -CFLAGS += -DLOADADDR=$(LOADADDR) - -ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DLZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) - -LDFLAGS = -static --gc-sections -no-warn-mismatch -LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START) - -O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) - -OBJECTS := head.o decompress.o board.o printf.o LzmaDecode.o - -ifneq ($(strip $(LOADER_DATA)),) -OBJECTS += data.o -CFLAGS += -DLZMA_WRAPPER=1 -else -CFLAGS += -D_LZMA_IN_CB -endif - -ifneq ($(strip $(CONFIG_PASS_KARGS)),) -CFLAGS += -DCONFIG_PASS_KARGS -endif - -BOARD_DEF := $(strip $(CONFIG_BOARD)) -BOARD_DEF := $(shell echo $(BOARD_DEF) | tr a-z A-Z | tr -d -) -ifneq ($(BOARD_DEF),) -CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF) -endif - -all: loader.bin - -# Don't build dependencies, this may die if $(CC) isn't gcc -dep: - -install: - -%.o : %.c - $(CC) $(CFLAGS) -c -o $@ $< - -%.o : %.S - $(CC) $(ASFLAGS) -c -o $@ $< - -data.o: $(LOADER_DATA) - $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< - -loader.bin: loader.elf - $(OBJCOPY) $(BIN_FLAGS) $< $@ - -loader.elf: $(OBJECTS) - $(LD) $(LDFLAGS) -o $@ $(OBJECTS) - -mrproper: clean - -clean: - rm -f *.elf *.bin *.o - - - diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/README b/target/linux/adm5120-2.6/image/lzma-loader/src/README deleted file mode 100644 index 16649e9500..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/README +++ /dev/null @@ -1,55 +0,0 @@ -/* - * LZMA compressed kernel decompressor for bcm947xx boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -The code is intended to decompress kernel, being compressed using lzma utility -build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory - -decompressor code expects that your .trx file consist of three partitions: - -1) decompressor itself (this is gziped code which pmon/cfe will extract and run -on boot-up instead of real kernel) -2) LZMA compressed kernel (both streamed and regular modes are supported now) -3) Root filesystem - -Please be sure to apply the following patch for use this new trx layout (it will -allow using both new and old trx files for root filesystem lookup code) - ---- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 -+++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 -@@ -221,7 +221,9 @@ - /* Try looking at TRX header for rootfs offset */ - if (le32_to_cpu(trx->magic) == TRX_MAGIC) { - bcm947xx_parts[1].offset = off; -- if (le32_to_cpu(trx->offsets[1]) > off) -+ if (le32_to_cpu(trx->offsets[2]) > off) -+ off = le32_to_cpu(trx->offsets[2]); -+ else if (le32_to_cpu(trx->offsets[1]) > off) - off = le32_to_cpu(trx->offsets[1]); - continue; - } - - -Revision history: - 0.02 Initial release - 0.03 Added Mineharu Takahara patch to pass actual - output size to decoder (stream mode compressed input is not - a requirement anymore) - 0.04 Reordered functions using lds script diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c b/target/linux/adm5120-2.6/image/lzma-loader/src/board.c deleted file mode 100644 index 22317f9683..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/board.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * ADM5120 specific board support for LZMA decompressor - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include - -#define READREG(r) *(volatile unsigned int *)(r) -#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v - -/* - * INTC definitions - */ -#define INTC_BASE 0xB2200000 - -/* INTC registers */ -#define INTC_REG_IRQ_DISABLE 0x0C - -/* - * UART definitions - */ -#define UART_BASE 0xB2600000 -/* UART registers */ -#define UART_REG_DATA 0x00 /* Data register */ -#define UART_REG_ECR 0x04 /* Error Clear register */ -#define UART_REG_LCRH 0x08 /* Line Control High register */ -#define UART_REG_LCRM 0x0C /* Line Control Middle register */ -#define UART_REG_LCRL 0x10 /* Line Control Low register */ -#define UART_REG_CTRL 0x14 /* Control register */ -#define UART_REG_FLAG 0x18 /* Flag register */ - -/* Control register bits */ -#define UART_CTRL_EN ( 1 << 0 ) /* UART enable */ - -/* Line Control High register bits */ -#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ - -/* Flag register bits */ -#define UART_FLAG_CTS ( 1 << 0 ) -#define UART_FLAG_DSR ( 1 << 1 ) -#define UART_FLAG_DCD ( 1 << 2 ) -#define UART_FLAG_BUSY ( 1 << 3 ) -#define UART_FLAG_RXFE ( 1 << 4 ) /* RX FIFO empty */ -#define UART_FLAG_TXFF ( 1 << 5 ) /* TX FIFO full */ -#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */ -#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */ - -/* - * SWITCH definitions - */ -#define SWITCH_BASE 0xB2000000 - -#define SWITCH_REG_CPUP_CONF 0x0024 -#define SWITCH_REG_PORT_CONF0 0x0028 - -#define SWITCH_REG_GPIO_CONF0 0x00B8 -#define SWITCH_REG_GPIO_CONF2 0x00BC - -#define SWITCH_REG_PORT0_LED 0x0100 -#define SWITCH_REG_PORT1_LED 0x0104 -#define SWITCH_REG_PORT2_LED 0x0108 -#define SWITCH_REG_PORT3_LED 0x010C -#define SWITCH_REG_PORT4_LED 0x0110 - -#define SWITCH_PORTS_HW 0x3F /* Hardware Ports */ - -/* CPUP_CONF register bits */ -#define CPUP_CONF_DCPUP ( 1 << 0 ) /* Disable CPU port */ - -/* PORT_CONF0 register bits */ -#define PORT_CONF0_DP_SHIFT 0 /* disable port shift*/ - - -/* - * UART routines - */ - -#define UART_READ(r) READREG(UART_BASE+(r)) -#define UART_WRITE(r,v) WRITEREG(UART_BASE+(r),(v)) - -static void uart_init(void) -{ -#if 0 - unsigned int t; - - /* disable uart */ - UART_WRITE(UART_REG_CTRL, 0); - - /* keep current baud rate */ - t = UART_READ(UART_REG_LCRM); - UART_WRITE(UART_REG_LCRM, t); - t = UART_READ(UART_REG_LCRL); - UART_WRITE(UART_REG_LCRL, t); - - /* keep data, stop, and parity bits, but disable FIFO */ - t = UART_READ(UART_REG_LCRH); - t &= ~(UART_LCRH_FEN); - UART_WRITE(UART_REG_LCRH, t ); - - /* clear error bits */ - UART_WRITE(UART_REG_ECR, 0xFF); - - /* enable uart, and disable interrupts */ - UART_WRITE(UART_REG_CTRL, UART_CTRL_EN); -#endif -} - -/* - * INTC routines - */ - -#define INTC_READ(r) READREG(INTC_BASE+(r)) -#define INTC_WRITE(r,v) WRITEREG(INTC_BASE+(r),v) - -static void intc_init(void) -{ - INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF); -} - -/* - * SWITCH routines - */ - -#define SWITCH_READ(r) READREG(SWITCH_BASE+(r)) -#define SWITCH_WRITE(r,v) WRITEREG(SWITCH_BASE+(r),v) - -static void switch_init(void) -{ - /* disable PHYS ports */ - SWITCH_WRITE(SWITCH_REG_PORT_CONF0, - (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT)); - - /* disable CPU port */ - SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP); - - /* disable GPIO lines */ - SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0); - SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0); - - /* disable LED lines */ - SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0); - SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0); -} - -void board_putc(int ch) -{ - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); - - UART_WRITE(UART_REG_DATA, ch); - - while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); -} - -void board_init(void) -{ - intc_init(); - switch_init(); - uart_init(); -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h b/target/linux/adm5120-2.6/image/lzma-loader/src/config.h deleted file mode 100644 index 310189c6d6..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/config.h +++ /dev/null @@ -1,119 +0,0 @@ -#ifndef _CONFIG_H_ -#define _CONFIG_H_ - -#define FLASH_2M (2<<20) -#define FLASH_4M (4<<20) - -/* - * Cellvision/SparkLAN boards - */ - -#if defined(CONFIG_BOARD_CAS630) -# define CONFIG_BOARD_NAME "CAS-630" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS670) -# define CONFIG_BOARD_NAME "CAS-670" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS700) -# define CONFIG_BOARD_NAME "CAS-700" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS790) -# define CONFIG_BOARD_NAME "CAS-790" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS771) -# define CONFIG_BOARD_NAME "CAS-771" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_CAS861) -# define CONFIG_BOARD_NAME "CAS-861" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_NFS101U) -# define CONFIG_BOARD_NAME "NFS-101U" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_NFS202U) -# define CONFIG_BOARD_NAME "NFS-202U" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * Compex boards - */ -#if defined(CONFIG_BOARD_WP54GWRT) -# define CONFIG_BOARD_NAME "WP54G-WRT" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * Edimax boards - */ -#if defined(CONFIG_BOARD_BR6104K) -# define CONFIG_BOARD_NAME "BR-6104K" -# define CONFIG_FLASH_SIZE FLASH_2M -#endif - -#if defined(CONFIG_BOARD_BR6104KP) -# define CONFIG_BOARD_NAME "BR-6104KP" -# define CONFIG_FLASH_SIZE FLASH_2M -#endif - -/* - * Infineon boards - */ -#if defined(CONFIG_BOARD_EASY5120PATA) -# define CONFIG_BOARD_NAME "EASY 5120P-ATA" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_EASY5120RT) -# define CONFIG_BOARD_NAME "EASY 5120-RT" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_EASY5120WVOIP) -# define CONFIG_BOARD_NAME "EASY 5120-WVOIP" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_EASY83000) -# define CONFIG_BOARD_NAME "EASY 83000" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * ZyXEL boards - */ -#if defined(CONFIG_BOARD_P334WT) -# define CONFIG_BOARD_NAME "P-334WT" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -#if defined(CONFIG_BOARD_P335) -# define CONFIG_BOARD_NAME "P-335" -# define CONFIG_FLASH_SIZE FLASH_4M -#endif - -/* - * Default values - */ -#ifndef CONFIG_BOARD_NAME -# define CONFIG_BOARD_NAME "ADM5120" -#endif - -#ifndef CONFIG_FLASH_SIZE -# define CONFIG_FLASH_SIZE FLASH_2M -#endif - -#endif /* _CONFIG_H_ */ diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c b/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c deleted file mode 100644 index 9e2a04c994..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/decompress.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * $Id$ - * - * LZMA compressed kernel decompressor for ADM5120 boards - * - * Copyright (C) 2005 by Oleg I. Vdovikin - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * Please note, this was code based on the bunzip2 decompressor code - * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left - * is an idea and part of original vendor code - * - * - * 12-Mar-2005 Mineharu Takahara - * pass actual output size to decoder (stream mode - * compressed input is not a requirement anymore) - * - * 24-Apr-2005 Oleg I. Vdovikin - * reordered functions using lds script, removed forward decl - * - * 24-Mar-2007 Gabor Juhos - * pass original values of the a0,a1,a2,a3 registers to the kernel - * - * 19-May-2007 Gabor Juhos - * endiannes related cleanups - * add support for decompressing an embedded kernel - * - */ - -#include - -#include "config.h" -#include "printf.h" -#include "LzmaDecode.h" - -#define ADM5120_FLASH_START 0x1fc00000 /* Flash start */ -#define ADM5120_FLASH_END 0x1fe00000 /* Flash end */ - -#define KSEG0 0x80000000 -#define KSEG1 0xa0000000 - -#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - -#define cache_unroll(base,op) \ - __asm__ __volatile__( \ - ".set noreorder;\n" \ - ".set mips3;\n" \ - "cache %1, (%0);\n" \ - ".set mips0;\n" \ - ".set reorder\n" \ - : \ - : "r" (base), \ - "i" (op)); - -#ifdef LZMA_DEBUG -# define DBG(f, a...) printf(f, ## a) -#else -# define DBG(f, a...) do {} while (0) -#endif - -static __inline__ void blast_icache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Invalidate_I); - start += lsize; - } -} - -static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) -{ - unsigned long start = KSEG0; - unsigned long end = (start + size); - - while(start < end) { - cache_unroll(start,Index_Writeback_Inv_D); - start += lsize; - } -} - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_ALIGN 0x1000 - -struct trx_header { - unsigned int magic; /* "HDR0" */ - unsigned int len; /* Length of file including header */ - unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ - unsigned int flag_version; /* 0:15 flags, 16:31 version */ - unsigned int offsets[3]; /* Offsets of partitions from start of header */ -}; - -struct env_var { - char *name; - char *value; -}; - -/* beyound the image end, size not known in advance */ -extern unsigned char workspace[]; -extern void board_init(void); - -typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1, - unsigned long reg_a2, unsigned long reg_a3); - -static int decompress_data(unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed); - -#ifdef CONFIG_PASS_KARGS -#define ENVV(n,v) {.name = (n), .value = (v)} -struct env_var env_vars[] = { - ENVV("board_name", CONFIG_BOARD_NAME), - ENVV(NULL, NULL) -}; -#endif - -static void halt(void) -{ - printf("\nSystem halted!\n"); - for(;;); -} - -#if LZMA_WRAPPER -extern unsigned char _lzma_data_start[]; -extern unsigned char _lzma_data_end[]; - -unsigned char *data; -unsigned long datalen; - -static __inline__ unsigned char get_byte(void) -{ - datalen--; - return *data++; -} - -static void decompress_init(void) -{ - data = _lzma_data_start; - datalen = _lzma_data_end - _lzma_data_start; -} - -static int decompress_data(unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - return LzmaDecode(buffer, bufferSize, lc, lp, pb, data, datalen, - outStream, outSize, outSizeProcessed); -} -#endif /* LZMA_WRAPPER */ - -#if !(LZMA_WRAPPER) - -#define FLASH_BANK_SIZE (2<<20) - -static unsigned char *flash_base = (unsigned char *) KSEG1ADDR(ADM5120_FLASH_START); -static unsigned long flash_ofs = 0; -static unsigned long flash_max = 0; -static unsigned long flash_ofs_mask = (FLASH_BANK_SIZE-1); - -static __inline__ unsigned char get_byte(void) -{ - return *(flash_base+flash_ofs++); -} - -static int lzma_read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) -{ - unsigned long len; - - if (flash_ofs >= flash_max) - return LZMA_RESULT_DATA_ERROR; - - len = flash_max-flash_ofs; - -#if (CONFIG_FLASH_SIZE > FLASH_BANK_SIZE) - if (flash_ofs < FLASH_BANK_SIZE) { - /* switch to bank 0 */ - DBG("lzma_read_byte: switch to bank 0\n"); - - if (len > FLASH_BANK_SIZE-flash_ofs) - len = FLASH_BANK_SIZE-flash_ofs; - } else { - /* switch to bank 1 */ - DBG("lzma_read_byte: switch to bank 1\n"); - } -#endif - DBG("lzma_read_byte: ofs=%08X, len=%08X\n", flash_ofs, len); - - *buffer = flash_base+(flash_ofs & flash_ofs_mask); - *bufferSize = len; - flash_ofs += len; - - return LZMA_RESULT_OK; -} - -static ILzmaInCallback lzma_callback = { - .Read = lzma_read_byte, -}; - -static __inline__ unsigned int read_le32(void *buf) -{ - unsigned char *p = buf; - - return ((unsigned int)p[0] + ((unsigned int)p[1] << 8) + - ((unsigned int)p[2] << 16) +((unsigned int)p[3] << 24)); -} - -static void decompress_init(void) -{ - struct trx_header *hdr = NULL; - unsigned long kofs,klen; - - printf("Looking for TRX header... "); - /* look for trx header, 32-bit data access */ - for (flash_ofs = 0; flash_ofs < FLASH_BANK_SIZE; flash_ofs += TRX_ALIGN) { - if (read_le32(&flash_base[flash_ofs]) == TRX_MAGIC) { - hdr = (struct trx_header *)&flash_base[flash_ofs]; - break; - } - } - - if (hdr == NULL) { - printf("not found!\n"); - /* no compressed kernel found, halting */ - halt(); - } - - /* compressed kernel is in the partition 0 or 1 */ - kofs = read_le32(&hdr->offsets[1]); - if (kofs == 0 || kofs > 65536) { - klen = kofs-read_le32(&hdr->offsets[0]); - kofs = read_le32(&hdr->offsets[0]); - } else { - klen = read_le32(&hdr->offsets[2]); - if (klen > kofs) - klen -= kofs; - else - klen = read_le32(&hdr->len)-kofs; - } - - printf("found at %08X, kernel:%08X len:%08X\n", flash_ofs, - kofs, klen); - - flash_ofs += kofs; - flash_max = flash_ofs+klen; -} - -static int decompress_data(unsigned char *buffer, UInt32 bufferSize, - int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, - UInt32 *outSizeProcessed) -{ - return LzmaDecode(buffer, bufferSize, lc, lp, pb, &lzma_callback, - outStream, outSize, outSizeProcessed); -} -#endif /* !(LZMA_WRAPPER) */ - -/* should be the first function */ -void decompress_entry(unsigned long reg_a0, unsigned long reg_a1, - unsigned long reg_a2, unsigned long reg_a3, - unsigned long icache_size, unsigned long icache_lsize, - unsigned long dcache_size, unsigned long dcache_lsize) -{ - unsigned int i; /* temp value */ - unsigned int lc; /* literal context bits */ - unsigned int lp; /* literal pos state bits */ - unsigned int pb; /* pos state bits */ - unsigned int osize; /* uncompressed size */ - int res; - - board_init(); - - printf("\n\nLZMA loader for " CONFIG_BOARD_NAME - ", Copyright (C) 2007 OpenWrt.org\n\n"); - - decompress_init(); - - /* lzma args */ - i = get_byte(); - lc = i % 9, i = i / 9; - lp = i % 5, pb = i / 5; - - /* skip rest of the LZMA coder property */ - for (i = 0; i < 4; i++) - get_byte(); - - /* read the lower half of uncompressed size in the header */ - osize = ((unsigned int)get_byte()) + - ((unsigned int)get_byte() << 8) + - ((unsigned int)get_byte() << 16) + - ((unsigned int)get_byte() << 24); - - /* skip rest of the header (upper half of uncompressed size) */ - for (i = 0; i < 4; i++) - get_byte(); - - printf("decompressing kernel... "); - - /* decompress kernel */ - res = decompress_data(workspace, ~0, lc, lp, pb, - (unsigned char *)LOADADDR, osize, &i); - - if (res != LZMA_RESULT_OK) { - printf("failed, "); - switch (res) { - case LZMA_RESULT_DATA_ERROR: - printf("data error!\n"); - break; - case LZMA_RESULT_NOT_ENOUGH_MEM: - printf("not enough memory!\n"); - break; - default: - printf("unknown error %d!\n", res); - } - halt(); - } else - printf("done!\n"); - - blast_dcache(dcache_size, dcache_lsize); - blast_icache(icache_size, icache_lsize); - - printf("launching kernel...\n\n"); - -#ifdef CONFIG_PASS_KARGS - reg_a0 = 0; - reg_a1 = 0; - reg_a2 = (unsigned long)env_vars; - reg_a3 = 0; -#endif - /* Jump to load address */ - ((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3); -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/head.S b/target/linux/adm5120-2.6/image/lzma-loader/src/head.S deleted file mode 100644 index ee8b3200cf..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/head.S +++ /dev/null @@ -1,209 +0,0 @@ -/* Copyright 2007 Gabor Juhos */ -/* keep original values of the a0,a1,a2,a3 registers */ -/* modifed to support user defined entry point address */ -/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ -/* cache manipulation adapted from Broadcom code */ -/* idea taken from original bunzip2 decompressor code */ -/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ -/* Licensed under the linux kernel's version of the GPL.*/ - -#include -#include - -#define KSEG0 0x80000000 - -#define C0_STATUS $12 -#define C0_CAUSE $13 -#define C0_CONFIG $16 -#define C0_WATCHLO $18 -#define C0_WATCHHI $19 -#define C0_TAGLO $28 -#define C0_TAGHI $29 - -#define CONF1_DA_SHIFT 7 /* D$ associativity */ -#define CONF1_DA_MASK 0x00000380 -#define CONF1_DA_BASE 1 -#define CONF1_DL_SHIFT 10 /* D$ line size */ -#define CONF1_DL_MASK 0x00001c00 -#define CONF1_DL_BASE 2 -#define CONF1_DS_SHIFT 13 /* D$ sets/way */ -#define CONF1_DS_MASK 0x0000e000 -#define CONF1_DS_BASE 64 -#define CONF1_IA_SHIFT 16 /* I$ associativity */ -#define CONF1_IA_MASK 0x00070000 -#define CONF1_IA_BASE 1 -#define CONF1_IL_SHIFT 19 /* I$ line size */ -#define CONF1_IL_MASK 0x00380000 -#define CONF1_IL_BASE 2 -#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ -#define CONF1_IS_MASK 0x01c00000 -#define CONF1_IS_BASE 64 - -#define Index_Invalidate_I 0x00 -#define Index_Writeback_Inv_D 0x01 - - .text - -#if (LZMA_STARTUP_ORG) - .set noreorder - - b startup - nop - - .org LZMA_STARTUP_ORG -#endif - -LEAF(startup) - .set noreorder - .set mips32 - - mtc0 zero, C0_WATCHLO # clear watch registers - mtc0 zero, C0_WATCHHI - - mtc0 zero, C0_CAUSE # clear before writing status register - - mfc0 t0, C0_STATUS # get status register - li t1, ~(0xFF01) - and t0, t1 # mask interrupts - mtc0 t0, C0_STATUS # set up status register - - move t1, ra # save return address - la t0, __reloc_label # get linked address of label - bal __reloc_label # branch and link to label to - nop # get actual address -__reloc_label: - subu t0, ra, t0 # get reloc_delta - move ra, t1 # restore return address - - beqz t0, __reloc_end # if delta is 0 we are in the right place - nop - - /* Copy our code to the right place */ - la t1, _code_start # get linked address of _code_start - la t2, _code_end # get linked address of _code_end - addu t0, t0, t1 # calculate actual address of _code_start - -__reloc_copy: - lw t3, 0(t0) - sw t3, 0(t1) - add t1, 4 - blt t1, t2, __reloc_copy - add t0, 4 - -__reloc_end: - - /* At this point we need to invalidate dcache and */ - /* icache before jumping to new code */ - -1: /* Get cache sizes */ - .set mips32 - mfc0 s0,C0_CONFIG,1 - .set mips0 - - li s1,CONF1_DL_MASK - and s1,s0 - beq s1,zero,nodc - nop - - srl s1,CONF1_DL_SHIFT - li t0,CONF1_DL_BASE - sll s1,t0,s1 /* s1 has D$ cache line size */ - - li s2,CONF1_DA_MASK - and s2,s0 - srl s2,CONF1_DA_SHIFT - addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ - - li t0,CONF1_DS_MASK - and t0,s0 - srl t0,CONF1_DS_SHIFT - li s3,CONF1_DS_BASE - sll s3,s3,t0 /* s3 has D$ sets per way */ - - multu s2,s3 /* sets/way * associativity */ - mflo t0 /* total cache lines */ - - multu s1,t0 /* D$ linesize * lines */ - mflo s2 /* s2 is now D$ size in bytes */ - - /* Initilize the D$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s2 /* + size of cache == end */ - - .set mips3 -1: cache Index_Writeback_Inv_D,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s1 - -nodc: - /* Now we get to do it all again for the I$ */ - - move s3,zero /* just in case there is no icache */ - move s4,zero - - li t0,CONF1_IL_MASK - and t0,s0 - beq t0,zero,noic - nop - - srl t0,CONF1_IL_SHIFT - li s3,CONF1_IL_BASE - sll s3,t0 /* s3 has I$ cache line size */ - - li t0,CONF1_IA_MASK - and t0,s0 - srl t0,CONF1_IA_SHIFT - addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ - - li t0,CONF1_IS_MASK - and t0,s0 - srl t0,CONF1_IS_SHIFT - li s5,CONF1_IS_BASE - sll s5,t0 /* s5 has I$ sets per way */ - - multu s4,s5 /* sets/way * associativity */ - mflo t0 /* s4 is now total cache lines */ - - multu s3,t0 /* I$ linesize * lines */ - mflo s4 /* s4 is cache size in bytes */ - - /* Initilize the I$: */ - mtc0 zero,C0_TAGLO - mtc0 zero,C0_TAGHI - - li t0,KSEG0 /* Just an address for the first $ line */ - addu t1,t0,s4 /* + size of cache == end */ - - .set mips3 -1: cache Index_Invalidate_I,0(t0) - .set mips0 - bne t0,t1,1b - addu t0,s3 - -noic: - /* Setup new "C" stack */ - la sp, _stack - - addiu sp, -32 /* reserve stack for parameters */ -#if 0 - sw a0, 0(sp) - sw a1, 4(sp) - sw a2, 8(sp) - sw a3, 12(sp) -#endif - sw s3, 16(sp) /* icache line size */ - sw s4, 20(sp) /* icache size */ - sw s1, 24(sp) /* dcache line size */ - sw s2, 28(sp) /* dcache size */ - - /* jump to the decompressor routine */ - la t0, decompress_entry - jr t0 - nop - - .set reorder -END(startup) diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds b/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds deleted file mode 100644 index bae70fb6ea..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/loader.lds +++ /dev/null @@ -1,29 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .text : { - _code_start = .; - *(.text) - *(.text.*) - *(.rodata) - *(.rodata.*) - . = ALIGN(16); - *(.data.lzma) - } - - .data : { - *(.data) - *(.data.*) - } - _code_end = .; - - .bss : { - *(.bss) - *(.bss.*) - } - - . = ALIGN(16); - . = . + 8192; - _stack = .; - - workspace = .; -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds deleted file mode 100644 index abf756ba13..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/lzma-data.lds +++ /dev/null @@ -1,8 +0,0 @@ -OUTPUT_ARCH(mips) -SECTIONS { - .data.lzma : { - _lzma_data_start = .; - *(.data) - _lzma_data_end = .; - } -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.c b/target/linux/adm5120-2.6/image/lzma-loader/src/printf.c deleted file mode 100644 index 7bb5a86e18..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.c +++ /dev/null @@ -1,350 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include "printf.h" - -extern void board_putc(int ch); - -/* this is the maximum width for a variable */ -#define LP_MAX_BUF 256 - -/* macros */ -#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) -#define Ctod(x) ( (x) - '0') - -/* forward declaration */ -static int PrintChar(char *, char, int, int); -static int PrintString(char *, char *, int, int); -static int PrintNum(char *, unsigned long, int, int, int, int, char, int); - -/* private variable */ -static const char theFatalMsg[] = "fatal error in lp_Print!"; - -/* -*- - * A low level printf() function. - */ -static void -lp_Print(void (*output)(void *, char *, int), - void * arg, - char *fmt, - va_list ap) -{ - -#define OUTPUT(arg, s, l) \ - { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ - (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ - } else { \ - (*output)(arg, s, l); \ - } \ - } - - char buf[LP_MAX_BUF]; - - char c; - char *s; - long int num; - - int longFlag; - int negFlag; - int width; - int prec; - int ladjust; - char padc; - - int length; - - for(;;) { - { - /* scan for the next '%' */ - char *fmtStart = fmt; - while ( (*fmt != '\0') && (*fmt != '%')) { - fmt ++; - } - - /* flush the string found so far */ - OUTPUT(arg, fmtStart, fmt-fmtStart); - - /* are we hitting the end? */ - if (*fmt == '\0') break; - } - - /* we found a '%' */ - fmt ++; - - /* check for long */ - if (*fmt == 'l') { - longFlag = 1; - fmt ++; - } else { - longFlag = 0; - } - - /* check for other prefixes */ - width = 0; - prec = -1; - ladjust = 0; - padc = ' '; - - if (*fmt == '-') { - ladjust = 1; - fmt ++; - } - - if (*fmt == '0') { - padc = '0'; - fmt++; - } - - if (IsDigit(*fmt)) { - while (IsDigit(*fmt)) { - width = 10 * width + Ctod(*fmt++); - } - } - - if (*fmt == '.') { - fmt ++; - if (IsDigit(*fmt)) { - prec = 0; - while (IsDigit(*fmt)) { - prec = prec*10 + Ctod(*fmt++); - } - } - } - - - /* check format flag */ - negFlag = 0; - switch (*fmt) { - case 'b': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'd': - case 'D': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - if (num < 0) { - num = - num; - negFlag = 1; - } - length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'o': - case 'O': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'u': - case 'U': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'x': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); - OUTPUT(arg, buf, length); - break; - - case 'X': - if (longFlag) { - num = va_arg(ap, long int); - } else { - num = va_arg(ap, int); - } - length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); - OUTPUT(arg, buf, length); - break; - - case 'c': - c = (char)va_arg(ap, int); - length = PrintChar(buf, c, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case 's': - s = (char*)va_arg(ap, char *); - length = PrintString(buf, s, width, ladjust); - OUTPUT(arg, buf, length); - break; - - case '\0': - fmt --; - break; - - default: - /* output this char as it is */ - OUTPUT(arg, fmt, 1); - } /* switch (*fmt) */ - - fmt ++; - } /* for(;;) */ - - /* special termination call */ - OUTPUT(arg, "\0", 1); -} - - -/* --------------- local help functions --------------------- */ -static int -PrintChar(char * buf, char c, int length, int ladjust) -{ - int i; - - if (length < 1) length = 1; - if (ladjust) { - *buf = c; - for (i=1; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-1; i++) buf[i] = ' '; - buf[length - 1] = c; - } - return length; -} - -static int -PrintString(char * buf, char* s, int length, int ladjust) -{ - int i; - int len=0; - char* s1 = s; - while (*s1++) len++; - if (length < len) length = len; - - if (ladjust) { - for (i=0; i< len; i++) buf[i] = s[i]; - for (i=len; i< length; i++) buf[i] = ' '; - } else { - for (i=0; i< length-len; i++) buf[i] = ' '; - for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; - } - return length; -} - -static int -PrintNum(char * buf, unsigned long u, int base, int negFlag, - int length, int ladjust, char padc, int upcase) -{ - /* algorithm : - * 1. prints the number from left to right in reverse form. - * 2. fill the remaining spaces with padc if length is longer than - * the actual length - * TRICKY : if left adjusted, no "0" padding. - * if negtive, insert "0" padding between "0" and number. - * 3. if (!ladjust) we reverse the whole string including paddings - * 4. otherwise we only reverse the actual string representing the num. - */ - - int actualLength =0; - char *p = buf; - int i; - - do { - int tmp = u %base; - if (tmp <= 9) { - *p++ = '0' + tmp; - } else if (upcase) { - *p++ = 'A' + tmp - 10; - } else { - *p++ = 'a' + tmp - 10; - } - u /= base; - } while (u != 0); - - if (negFlag) { - *p++ = '-'; - } - - /* figure out actual length and adjust the maximum length */ - actualLength = p - buf; - if (length < actualLength) length = actualLength; - - /* add padding */ - if (ladjust) { - padc = ' '; - } - if (negFlag && !ladjust && (padc == '0')) { - for (i = actualLength-1; i< length-1; i++) buf[i] = padc; - buf[length -1] = '-'; - } else { - for (i = actualLength; i< length; i++) buf[i] = padc; - } - - - /* prepare to reverse the string */ - { - int begin = 0; - int end; - if (ladjust) { - end = actualLength - 1; - } else { - end = length -1; - } - - while (end > begin) { - char tmp = buf[begin]; - buf[begin] = buf[end]; - buf[end] = tmp; - begin ++; - end --; - } - } - - /* adjust the string pointer */ - return length; -} - -static void printf_output(void *arg, char *s, int l) -{ - int i; - - // special termination call - if ((l==1) && (s[0] == '\0')) return; - - for (i=0; i< l; i++) { - board_putc(s[i]); - if (s[i] == '\n') board_putc('\r'); - } -} - -void printf(char *fmt, ...) -{ - va_list ap; - va_start(ap, fmt); - lp_Print(printf_output, 0, fmt, ap); - va_end(ap); -} diff --git a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.h b/target/linux/adm5120-2.6/image/lzma-loader/src/printf.h deleted file mode 100644 index 9b1c1df232..0000000000 --- a/target/linux/adm5120-2.6/image/lzma-loader/src/printf.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Copyright (C) 2001 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef _printf_h_ -#define _printf_h_ - -#include -void printf(char *fmt, ...); - -#endif /* _printf_h_ */ diff --git a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch deleted file mode 100644 index 14cb612b08..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/001-adm5120.patch +++ /dev/null @@ -1,114 +0,0 @@ -Index: linux-2.6.22.1/arch/mips/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/arch/mips/Kconfig -+++ linux-2.6.22.1/arch/mips/Kconfig -@@ -15,6 +15,18 @@ choice - prompt "System type" - default SGI_IP22 - -+config MIPS_ADM5120 -+ bool "Support for ADM5120 SoC" -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select GENERIC_GPIO -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -@@ -658,6 +670,7 @@ config TOSHIBA_RBTX4938 - - endchoice - -+source "arch/mips/adm5120/Kconfig" - source "arch/mips/au1000/Kconfig" - source "arch/mips/ddb5xxx/Kconfig" - source "arch/mips/gt64120/ev64120/Kconfig" -Index: linux-2.6.22.1/arch/mips/Makefile -=================================================================== ---- linux-2.6.22.1.orig/arch/mips/Makefile -+++ linux-2.6.22.1/arch/mips/Makefile -@@ -165,6 +165,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ - load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 - - # -+# ADMtek 5120 -+# -+ -+libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/ -+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/ -+core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/ -+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120 -+load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000 -+ -+# - # Common Alchemy Au1x00 stuff - # - core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ -Index: linux-2.6.22.1/include/asm-mips/bootinfo.h -=================================================================== ---- linux-2.6.22.1.orig/include/asm-mips/bootinfo.h -+++ linux-2.6.22.1/include/asm-mips/bootinfo.h -@@ -213,6 +213,57 @@ - #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ - #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - -+/* -+ * Valid machtype for group ADMtek ADM5120 -+ */ -+#define MACH_GROUP_ADM5120 26 -+#define MACH_ADM5120_GENERIC 0 /* Generic board */ -+#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ -+#define MACH_ADM5120_WP54G 2 /* Compex WP54G */ -+#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */ -+#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */ -+#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */ -+#define MACH_ADM5120_NP28G 6 /* Compex NP28G */ -+#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */ -+#define MACH_ADM5120_NP27G 8 /* Compex NP27G */ -+#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */ -+#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */ -+#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */ -+#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */ -+#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */ -+#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */ -+#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */ -+#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */ -+#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */ -+#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */ -+#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */ -+#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */ -+#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */ -+#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */ -+#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */ -+#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */ -+#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */ -+#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */ -+#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */ -+#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */ -+#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */ -+#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */ -+#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */ -+#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */ -+#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */ -+#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */ -+#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */ -+#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */ -+#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */ -+#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */ -+#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */ -+#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */ -+#define MACH_ADM5120_EASY5120PATA 42 /* Infineon EASY 5120P-ATA */ -+#define MACH_ADM5120_EASY5120RT 43 /* Infineon EASY 5120-RT */ -+#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */ -+#define MACH_ADM5120_EASY83000 45 /* Infineon EASY-83000 */ -+#define MACH_ADM5120_BR6104K 46 /* Edimax BR-6104K */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); diff --git a/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch b/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch deleted file mode 100644 index e2f21bfc4c..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/002-adm5120_flash.patch +++ /dev/null @@ -1,26 +0,0 @@ -Index: linux-2.6.22.1/drivers/mtd/maps/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/maps/Kconfig -+++ linux-2.6.22.1/drivers/mtd/maps/Kconfig -@@ -620,5 +620,9 @@ config MTD_PLATRAM - - This selection automatically selects the map_ram driver. - -+config MTD_ADM5120 -+ tristate "Map driver for ADM5120 based boards" -+ depends on MIPS_ADM5120 -+ - endmenu - -Index: linux-2.6.22.1/drivers/mtd/maps/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/maps/Makefile -+++ linux-2.6.22.1/drivers/mtd/maps/Makefile -@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o - obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o - obj-$(CONFIG_MTD_PCI) += pci.o - obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o -+obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o - obj-$(CONFIG_MTD_LASAT) += lasat.o - obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o - obj-$(CONFIG_MTD_EDB7312) += edb7312.o diff --git a/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch b/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch deleted file mode 100644 index ff8a9bbc29..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/003-adm5120_switch.patch +++ /dev/null @@ -1,27 +0,0 @@ -Index: linux-2.6.22.1/drivers/net/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/net/Kconfig -+++ linux-2.6.22.1/drivers/net/Kconfig -@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET - If you have an Alchemy Semi AU1X00 based system - say Y. Otherwise, say N. - -+config MIPS_ADM5120_ENET -+ tristate "MIPS ADM5120 Ethernet switch support" -+ depends on NET_ETHERNET && MIPS_ADM5120 -+ - config NET_SB1250_MAC - tristate "SB1250 Ethernet support" - depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC -Index: linux-2.6.22.1/drivers/net/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/net/Makefile -+++ linux-2.6.22.1/drivers/net/Makefile -@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o - # This is also a 82596 and should probably be merged - obj-$(CONFIG_LP486E) += lp486e.o - -+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o - obj-$(CONFIG_ETH16I) += eth16i.o - obj-$(CONFIG_ZORRO8390) += zorro8390.o - obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_nand.patch b/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_nand.patch deleted file mode 100644 index 79915e0281..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/004-adm5120_nand.patch +++ /dev/null @@ -1,29 +0,0 @@ -Index: linux-2.6.22.1/drivers/mtd/nand/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/nand/Kconfig -+++ linux-2.6.22.1/drivers/mtd/nand/Kconfig -@@ -81,6 +81,12 @@ config MTD_NAND_TS7250 - help - Support for NAND flash on Technologic Systems TS-7250 platform. - -+config MTD_NAND_RB100 -+ tristate "NAND Flash device on RB100 board" -+ depends on MTD_NAND -+ help -+ Support for NAND flash on RB100 platform. -+ - config MTD_NAND_IDS - tristate - -Index: linux-2.6.22.1/drivers/mtd/nand/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/nand/Makefile -+++ linux-2.6.22.1/drivers/mtd/nand/Makefile -@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan - obj-$(CONFIG_MTD_NAND_SPIA) += spia.o - obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o - obj-$(CONFIG_MTD_NAND_TOTO) += toto.o -+obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o - obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o - obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o - obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o diff --git a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch deleted file mode 100644 index 9b2272ae0d..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch +++ /dev/null @@ -1,66 +0,0 @@ -Index: linux-2.6.22.1/drivers/usb/core/hub.c -=================================================================== ---- linux-2.6.22.1.orig/drivers/usb/core/hub.c -+++ linux-2.6.22.1/drivers/usb/core/hub.c -@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub - "%s failed (err = %d)\n", __FUNCTION__, ret); - else { - *status = le16_to_cpu(hub->status->hub.wHubStatus); -- *change = le16_to_cpu(hub->status->hub.wHubChange); -+ *change = le16_to_cpu(hub->status->hub.wHubChange); - ret = 0; - } - mutex_unlock(&hub->status_mutex); -@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu - ret = -EIO; - } else { - *status = le16_to_cpu(hub->status->port.wPortStatus); -- *change = le16_to_cpu(hub->status->port.wPortChange); -+ *change = le16_to_cpu(hub->status->port.wPortChange); - ret = 0; - } - mutex_unlock(&hub->status_mutex); -@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru - USB_DT_DEVICE << 8, 0, - buf, GET_DESCRIPTOR_BUFSIZE, - USB_CTRL_GET_TIMEOUT); -+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0, -+buf->bDescriptorType, USB_DT_DEVICE); - switch (buf->bMaxPacketSize0) { - case 8: case 16: case 32: case 64: case 255: - if (buf->bDescriptorType == -Index: linux-2.6.22.1/drivers/usb/host/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/usb/host/Kconfig -+++ linux-2.6.22.1/drivers/usb/host/Kconfig -@@ -237,3 +237,6 @@ config USB_SL811_CS - To compile this driver as a module, choose M here: the - module will be called "sl811_cs". - -+config USB_ADM5120_HCD -+ tristate "ADM5120 HCD support" -+ depends on USB && MIPS_ADM5120 -Index: linux-2.6.22.1/drivers/usb/host/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/usb/host/Makefile -+++ linux-2.6.22.1/drivers/usb/host/Makefile -@@ -8,6 +8,7 @@ endif - - obj-$(CONFIG_PCI) += pci-quirks.o - -+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o - obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o - obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o - obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o -Index: linux-2.6.22.1/drivers/usb/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/usb/Makefile -+++ linux-2.6.22.1/drivers/usb/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ - obj-$(CONFIG_USB_SL811_HCD) += host/ - obj-$(CONFIG_USB_U132_HCD) += host/ - obj-$(CONFIG_USB_OHCI_AT91) += host/ -+obj-$(CONFIG_USB_ADM5120_HCD) += host/ - - obj-$(CONFIG_USB_ACM) += class/ - obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch b/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch deleted file mode 100644 index bf173bd92c..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/006-adm5120_leds.patch +++ /dev/null @@ -1,45 +0,0 @@ -Index: linux-2.6.22.1/drivers/leds/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/leds/Kconfig -+++ linux-2.6.22.1/drivers/leds/Kconfig -@@ -20,6 +20,27 @@ config LEDS_CLASS - - comment "LED drivers" - -+config LEDS_GPIO -+ tristate "LED support for LEDS on GPIO lines" -+ depends on LEDS_CLASS && GENERIC_GPIO -+ help -+ This option enables support for LEDs connected to GPIO lines -+ -+config LEDS_ADM5120 -+ tristate "LED Support for ADM5120 GPIO LEDs" -+ depends on LEDS_GPIO && MIPS_ADM5120 -+ help -+ This option enables support for LEDs connected to GPIO lines -+ on ADM5120 SoC based platforms. -+ -+config LEDS_ADM5120_EXPERIMENTAL -+ bool "Enable ADM5120 LEDs experimental code" -+ depends on LEDS_ADM5120 -+ -+config LEDS_ADM5120_DIAG -+ bool "Enable ADM5120 LEDs diagnostic mode" -+ depends on LEDS_ADM5120 -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends on LEDS_CLASS && PXA_SHARP_C7xx -Index: linux-2.6.22.1/drivers/leds/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/leds/Makefile -+++ linux-2.6.22.1/drivers/leds/Makefile -@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o -+obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch b/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch deleted file mode 100644 index 71b97ed126..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/007-adm5120_pci.patch +++ /dev/null @@ -1,23 +0,0 @@ -Index: linux-2.6.22.1/arch/mips/pci/Makefile -=================================================================== ---- linux-2.6.22.1.orig/arch/mips/pci/Makefile -+++ linux-2.6.22.1/arch/mips/pci/Makefile -@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- - obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o - obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o - obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o -+obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o -Index: linux-2.6.22.1/include/linux/pci_ids.h -=================================================================== ---- linux-2.6.22.1.orig/include/linux/pci_ids.h -+++ linux-2.6.22.1/include/linux/pci_ids.h -@@ -1713,6 +1713,9 @@ - #define PCI_VENDOR_ID_ESDGMBH 0x12fe - #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 - -+#define PCI_VENDOR_ID_ADMTEK 0x1317 -+#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 -+ - #define PCI_VENDOR_ID_SIIG 0x131f - #define PCI_SUBVENDOR_ID_SIIG 0x131f - #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_uart.patch b/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_uart.patch deleted file mode 100644 index 7f8451324d..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/008-adm5120_uart.patch +++ /dev/null @@ -1,53 +0,0 @@ -Index: linux-2.6.22.1/drivers/serial/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/serial/Makefile -+++ linux-2.6.22.1/drivers/serial/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) - obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o - obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o - obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o -+obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o - obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o - obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o - obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -Index: linux-2.6.22.1/include/linux/serial_core.h -=================================================================== ---- linux-2.6.22.1.orig/include/linux/serial_core.h -+++ linux-2.6.22.1/include/linux/serial_core.h -@@ -143,6 +143,9 @@ - #define PORT_KS8695 76 - - -+/* ADMtek ADM5120 SoC */ -+#define PORT_ADM5120 77 -+ - #ifdef __KERNEL__ - - #include -Index: linux-2.6.22.1/drivers/serial/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/serial/Kconfig -+++ linux-2.6.22.1/drivers/serial/Kconfig -@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K - - comment "Non-8250 serial port support" - -+config SERIAL_ADM5120 -+ bool "ADM5120 serial port support" -+ depends on MIPS_ADM5120 -+ select SERIAL_CORE -+ select SERIAL_CORE_CONSOLE -+ help -+ Driver for the on chip UARTs on the ADM5120 SoC -+ -+config ADM5120_NR_UARTS -+ int "Maximum number of ADM5120 serial ports" -+ depends on SERIAL_ADM5120 -+ default "2" -+ ---help--- -+ Set this to the number of serial ports you want the driver to -+ support. -+ - config SERIAL_AMBA_PL010 - tristate "ARM AMBA PL010 serial port support" - depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) diff --git a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120-2.6/patches-2.6.22/100-mtd_myloder_partition_parser.patch deleted file mode 100644 index 574b2d2158..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/100-mtd_myloder_partition_parser.patch +++ /dev/null @@ -1,39 +0,0 @@ -Index: linux-2.6.22.1/drivers/mtd/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/Kconfig -+++ linux-2.6.22.1/drivers/mtd/Kconfig -@@ -160,6 +160,22 @@ config MTD_AFS_PARTS - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_MYLOADER_PARTS -+ tristate "MyLoader partition parsing" -+ depends on MIPS_ADM5120 && MTD_PARTITIONS -+ ---help--- -+ MyLoader is a bootloader which allows the user to define partitions -+ in flash devices, by putting a table in the second erase block -+ on the device, similar to a partition table. This table gives the -+ offsets and lengths of the user defined partitions. -+ -+ If you need code which can detect and parse these tables, and -+ register MTD 'partitions' corresponding to each image detected, -+ enable this option. -+ -+ You will still need the parsing functions to be called by the driver -+ for your particular device. It won't happen automatically. -+ - comment "User Modules And Translation Layers" - - config MTD_CHAR -Index: linux-2.6.22.1/drivers/mtd/Makefile -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/Makefile -+++ linux-2.6.22.1/drivers/mtd/Makefile -@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/adm5120-2.6/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120-2.6/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch deleted file mode 100644 index 84c45d2014..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch +++ /dev/null @@ -1,95 +0,0 @@ -Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c -+++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -47,12 +47,19 @@ - #define MANUFACTURER_AMD 0x0001 - #define MANUFACTURER_ATMEL 0x001F - #define MANUFACTURER_SST 0x00BF -+#define MANUFACTURER_MACRONIX 0x00C2 - #define SST49LF004B 0x0060 - #define SST49LF040B 0x0050 - #define SST49LF008A 0x005a - #define AT49BV6416 0x00d6 - #define MANUFACTURER_SAMSUNG 0x00ec - -+/* Macronix */ -+#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ -+#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ -+#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ -+#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ -+ - static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); - static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); - static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); -@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct - mtd->flags |= MTD_STUPID_LOCK; - } - -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+/* -+ * Some Macronix chips has no/bad bootblock information in the CFI table -+ */ -+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param) -+{ -+ struct map_info *map = mtd->priv; -+ struct cfi_private *cfi = map->fldrv_priv; -+ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; -+ __u8 t; -+ -+ switch (cfi->id) { -+ /* TODO: put affected chip ids here */ -+ case MX29LV160B: -+ case MX29LV320B: -+ t = 2; /* Bottom boot */ -+ break; -+ case MX29LV160T: -+ case MX29LV320T: -+ t = 3; /* Top boot */ -+ break; -+ default: -+ return; -+ } -+ -+ if (extp->TopBottom == t) -+ /* boot location detected by the CFI layer is correct */ -+ return; -+ -+ extp->TopBottom = t; -+ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " -+ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); -+} -+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ -+ - static struct cfi_fixup cfi_fixup_table[] = { - #ifdef AMD_BOOTLOC_BUG - { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, -@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[ - { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, - #endif - { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, -+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, -+#endif - { 0, 0, NULL, NULL } - }; - static struct cfi_fixup jedec_fixup_table[] = { -Index: linux-2.6.22.1/drivers/mtd/chips/Kconfig -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/chips/Kconfig -+++ linux-2.6.22.1/drivers/mtd/chips/Kconfig -@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD - provides support for one of those command sets, used on chips - including the AMD Am29LV320. - -+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC -+ bool "Force bottom boot for Macronix flash chips" -+ depends on MTD_CFI_AMDSTD -+ help -+ Some Macronix flash chips have no/wrong boot-block location in the -+ CFI table, and the driver may detect the type incorrectly. Select -+ this if your board has such chip. -+ - config MTD_CFI_STAA - tristate "Support for ST (Advanced Architecture) flash chips" - depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120-2.6/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120-2.6/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch deleted file mode 100644 index abed363edb..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch +++ /dev/null @@ -1,74 +0,0 @@ -Index: linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c -=================================================================== ---- linux-2.6.22.1.orig/drivers/mtd/chips/jedec_probe.c -+++ linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c -@@ -121,6 +121,10 @@ - #define UPD29F064115 0x221C - - /* PMC */ -+#define PM39LV512 0x001B -+#define PM39LV010 0x001C -+#define PM39LV020 0x003D -+#define PM39LV040 0x003E - #define PM49FL002 0x006D - #define PM49FL004 0x006E - #define PM49FL008 0x006A -@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec - ERASEINFO(0x02000,2), - ERASEINFO(0x04000,1), - } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV512, -+ .name = "PMC Pm39LV512", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_64KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, -+ .regions = { -+ ERASEINFO(0x01000,16), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV010, -+ .name = "PMC Pm39LV010", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_128KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, -+ .regions = { -+ ERASEINFO(0x01000,32), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV020, -+ .name = "PMC Pm39LV020", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_256KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, -+ .regions = { -+ ERASEINFO(0x01000,64), -+ } -+ }, { -+ .mfr_id = MANUFACTURER_PMC, -+ .dev_id = PM39LV040, -+ .name = "PMC Pm39LV040", -+ .uaddr = { -+ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ -+ }, -+ .DevSize = SIZE_512KiB, -+ .CmdSet = P_ID_AMD_STD, -+ .NumEraseRegions= 1, -+ .regions = { -+ ERASEINFO(0x01000,128), -+ } - }, { - .mfr_id = MANUFACTURER_PMC, - .dev_id = PM49FL002, diff --git a/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch b/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch deleted file mode 100644 index 093dfc6b4f..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/140-cmdline_hack.patch +++ /dev/null @@ -1,26 +0,0 @@ -Index: linux-2.6.22.1/arch/mips/kernel/head.S -=================================================================== ---- linux-2.6.22.1.orig/arch/mips/kernel/head.S -+++ linux-2.6.22.1/arch/mips/kernel/head.S -@@ -129,14 +129,19 @@ - #endif - .endm - -- - j kernel_entry - nop -- -+ nop -+ - /* - * Reserved space for exception handlers. - * Necessary for machines which link their kernels at KSEG0. -+ * Use as temporary storage for the kernel command line, so that it -+ * can be updated easily without having to relink the kernel. - */ -+ -+EXPORT(_image_cmdline) -+ .ascii "CMDLINE:" - .align 10 - - EXPORT(stext) # used for profiling diff --git a/target/linux/adm5120-2.6/patches-2.6.22/200-amba_pl010_hacks.patch b/target/linux/adm5120-2.6/patches-2.6.22/200-amba_pl010_hacks.patch deleted file mode 100644 index 840d5a4cf5..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/200-amba_pl010_hacks.patch +++ /dev/null @@ -1,297 +0,0 @@ -Index: linux/drivers/serial/amba-pl010.c -=================================================================== ---- linux.orig/drivers/serial/amba-pl010.c -+++ linux/drivers/serial/amba-pl010.c -@@ -52,11 +52,10 @@ - - #include - --#define UART_NR 8 -- - #define SERIAL_AMBA_MAJOR 204 - #define SERIAL_AMBA_MINOR 16 --#define SERIAL_AMBA_NR UART_NR -+#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS -+#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME - - #define AMBA_ISR_PASS_LIMIT 256 - -@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr &= ~UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); - } -@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr |= UART010_CR_TIE; - writel(cr, uap->port.membase + UART010_CR); - } -@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); - writel(cr, uap->port.membase + UART010_CR); - } -@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_ - struct uart_amba_port *uap = (struct uart_amba_port *)port; - unsigned int cr; - -- cr = readb(uap->port.membase + UART010_CR); -+ cr = readl(uap->port.membase + UART010_CR); - cr |= UART010_CR_MSIE; - writel(cr, uap->port.membase + UART010_CR); - } -@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a - struct tty_struct *tty = uap->port.info->tty; - unsigned int status, ch, flag, rsr, max_count = 256; - -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - while (UART_RX_DATA(status) && max_count--) { -- ch = readb(uap->port.membase + UART01x_DR); -+ ch = readl(uap->port.membase + UART01x_DR); - flag = TTY_NORMAL; - - uap->port.icount.rx++; -@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a - * Note that the error handling code is - * out of the main execution path - */ -- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; -+ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; - if (unlikely(rsr & UART01x_RSR_ANY)) { - writel(0, uap->port.membase + UART01x_ECR); - -@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a - uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); - - ignore_char: -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - } - spin_unlock(&uap->port.lock); - tty_flip_buffer_push(tty); -@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua - - writel(0, uap->port.membase + UART010_ICR); - -- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - delta = status ^ uap->old_status; - uap->old_status = status; -@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo - - spin_lock(&uap->port.lock); - -- status = readb(uap->port.membase + UART010_IIR); -+ status = readl(uap->port.membase + UART010_IIR); - if (status) { - do { - if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) -@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo - if (pass_counter-- == 0) - break; - -- status = readb(uap->port.membase + UART010_IIR); -+ status = readl(uap->port.membase + UART010_IIR); - } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | - UART010_IIR_TIS)); - handled = 1; -@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo - static unsigned int pl010_tx_empty(struct uart_port *port) - { - struct uart_amba_port *uap = (struct uart_amba_port *)port; -- unsigned int status = readb(uap->port.membase + UART01x_FR); -+ unsigned int status = readl(uap->port.membase + UART01x_FR); - return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; - } - -@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru - unsigned int result = 0; - unsigned int status; - -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - if (status & UART01x_FR_DCD) - result |= TIOCM_CAR; - if (status & UART01x_FR_DSR) -@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_ - unsigned int lcr_h; - - spin_lock_irqsave(&uap->port.lock, flags); -- lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = readl(uap->port.membase + UART010_LCRH); - if (break_state == -1) - lcr_h |= UART01x_LCRH_BRK; - else -@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por - /* - * initialise the old status of the modem signals - */ -- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; -+ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; - - /* - * Finally, enable interrupts -@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p - writel(0, uap->port.membase + UART010_CR); - - /* disable break condition and fifos */ -- writel(readb(uap->port.membase + UART010_LCRH) & -+ writel(readl(uap->port.membase + UART010_LCRH) & - ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), - uap->port.membase + UART010_LCRH); - -@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port - /* - * Ask the core to calculate the divisor for us. - */ -- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); -+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); - quot = uart_get_divisor(port, baud); - - switch (termios->c_cflag & CSIZE) { -@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port - uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; - - /* first, disable everything */ -- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; -+ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; - - if (UART_ENABLE_MS(port, termios->c_cflag)) - old_cr |= UART010_CR_MSIE; -@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops = - .verify_port = pl010_verify_port, - }; - --static struct uart_amba_port *amba_ports[UART_NR]; -+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR]; - - #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE - -@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct - unsigned int status; - - do { -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - barrier(); - } while (!UART_TX_READY(status)); - writel(ch, uap->port.membase + UART01x_DR); -@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, - /* - * First save the CR then disable the interrupts - */ -- old_cr = readb(uap->port.membase + UART010_CR); -+ old_cr = readl(uap->port.membase + UART010_CR); - writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); - - uart_console_write(&uap->port, s, count, pl010_console_putchar); -@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, - * and restore the TCR - */ - do { -- status = readb(uap->port.membase + UART01x_FR); -+ status = readl(uap->port.membase + UART01x_FR); - barrier(); - } while (status & UART01x_FR_BUSY); - writel(old_cr, uap->port.membase + UART010_CR); -@@ -589,9 +588,9 @@ static void __init - pl010_console_get_options(struct uart_amba_port *uap, int *baud, - int *parity, int *bits) - { -- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { -+ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { - unsigned int lcr_h, quot; -- lcr_h = readb(uap->port.membase + UART010_LCRH); -+ lcr_h = readl(uap->port.membase + UART010_LCRH); - - *parity = 'n'; - if (lcr_h & UART01x_LCRH_PEN) { -@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am - else - *bits = 8; - -- quot = readb(uap->port.membase + UART010_LCRL) | -- readb(uap->port.membase + UART010_LCRM) << 8; -+ quot = readl(uap->port.membase + UART010_LCRL) | -+ readl(uap->port.membase + UART010_LCRM) << 8; - *baud = uap->port.uartclk / (16 * (quot + 1)); - } - } -@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st - * if so, search for the first available port that does have - * console support. - */ -- if (co->index >= UART_NR) -+ if (co->index >= SERIAL_AMBA_NR) - co->index = 0; - uap = amba_ports[co->index]; - if (!uap) -@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st - - static struct uart_driver amba_reg; - static struct console amba_console = { -- .name = "ttyAM", -+ .name = SERIAL_AMBA_NAME, - .write = pl010_console_write, - .device = uart_console_device, - .setup = pl010_console_setup, -@@ -659,11 +658,11 @@ static struct console amba_console = { - - static struct uart_driver amba_reg = { - .owner = THIS_MODULE, -- .driver_name = "ttyAM", -- .dev_name = "ttyAM", -+ .driver_name = SERIAL_AMBA_NAME, -+ .dev_name = SERIAL_AMBA_NAME, - .major = SERIAL_AMBA_MAJOR, - .minor = SERIAL_AMBA_MINOR, -- .nr = UART_NR, -+ .nr = SERIAL_AMBA_NR, - .cons = AMBA_CONSOLE, - }; - -Index: linux/drivers/serial/Kconfig -=================================================================== ---- linux.orig/drivers/serial/Kconfig -+++ linux/drivers/serial/Kconfig -@@ -293,10 +293,25 @@ config SERIAL_AMBA_PL010 - help - This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have - an Integrator/AP or Integrator/PP2 platform, or if you have a -- Cirrus Logic EP93xx CPU, say Y or M here. -+ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here. - - If unsure, say N. - -+config SERIAL_AMBA_PL010_NUMPORTS -+ int "Maximum number of AMBA PL010 serial ports" -+ depends on SERIAL_AMBA_PL010 -+ default "8" -+ ---help--- -+ Set this to the number of serial ports you want the AMBA PL010 driver -+ to support. -+ -+config SERIAL_AMBA_PL010_PORTNAME -+ string "Name of the AMBA PL010 serial ports" -+ depends on SERIAL_AMBA_PL010 -+ default "ttyAM" -+ ---help--- -+ ::: To be written ::: -+ - config SERIAL_AMBA_PL010_CONSOLE - bool "Support for console on AMBA serial port" - depends on SERIAL_AMBA_PL010=y diff --git a/target/linux/adm5120-2.6/patches-2.6.22/201-amba_bus_hacks.patch b/target/linux/adm5120-2.6/patches-2.6.22/201-amba_bus_hacks.patch deleted file mode 100644 index 3b92f25611..0000000000 --- a/target/linux/adm5120-2.6/patches-2.6.22/201-amba_bus_hacks.patch +++ /dev/null @@ -1,15 +0,0 @@ -Index: linux/drivers/amba/bus.c -=================================================================== ---- linux.orig/drivers/amba/bus.c -+++ linux/drivers/amba/bus.c -@@ -17,6 +17,10 @@ - #include - #include - -+#ifndef NO_IRQ -+#define NO_IRQ (-1) -+#endif -+ - #define to_amba_device(d) container_of(d, struct amba_device, dev) - #define to_amba_driver(d) container_of(d, struct amba_driver, drv) - diff --git a/target/linux/adm5120-2.6/profiles/100-Atheros.mk b/target/linux/adm5120-2.6/profiles/100-Atheros.mk deleted file mode 100644 index 029586848f..0000000000 --- a/target/linux/adm5120-2.6/profiles/100-Atheros.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Atheros - NAME:=Atheros WiFi (default) - PACKAGES:=kmod-madwifi -endef - -define Profile/Atheros/Description - Package set compatible with hardware using Atheros WiFi cards -endef -$(eval $(call Profile,Atheros)) - diff --git a/target/linux/adm5120-2.6/profiles/105-Texas.mk b/target/linux/adm5120-2.6/profiles/105-Texas.mk deleted file mode 100644 index 727a0c0648..0000000000 --- a/target/linux/adm5120-2.6/profiles/105-Texas.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Texas - NAME:=Texas Instruments WiFi - PACKAGES:=kmod-acx -endef - -define Profile/Texas/Description - Package set compatible with hardware using Texas Instruments WiFi cards -endef -$(eval $(call Profile,Texas)) - diff --git a/target/linux/adm5120-2.6/profiles/110-Ralink.mk b/target/linux/adm5120-2.6/profiles/110-Ralink.mk deleted file mode 100644 index d30ee73944..0000000000 --- a/target/linux/adm5120-2.6/profiles/110-Ralink.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# Copyright (C) 2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Ralink - NAME:=Ralink WiFi - PACKAGES:=kmod-rt2500 -endef - -define Profile/Ralink/Description - Package set compatible with hardware using Ralink WiFi cards -endef -$(eval $(call Profile,Ralink)) diff --git a/target/linux/adm5120-2.6/profiles/200-None.mk b/target/linux/adm5120-2.6/profiles/200-None.mk deleted file mode 100644 index 2fcfacde9f..0000000000 --- a/target/linux/adm5120-2.6/profiles/200-None.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/None - NAME:=No WiFi - PACKAGES:= -endef - -define Profile/None/Description - Package set without WiFi support -endef -$(eval $(call Profile,None)) - diff --git a/target/linux/adm5120-2.6/profiles/Cellvision.mk b/target/linux/adm5120-2.6/profiles/Cellvision.mk deleted file mode 100644 index 6912f13e3e..0000000000 --- a/target/linux/adm5120-2.6/profiles/Cellvision.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# Copyright (C) 2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Cellvision - NAME:=Cellvision CAS-63x/77x cameras - PACKAGES:=kmod-rt2500 kmod-cpia2 kmod-usb-ohci kmod-usb2 kmod-usb-audio -endef - -define Profile/Cellvision/Description - Package set compatible with the Cellvision CAS devices, including Wireless variants. -endef -$(eval $(call Profile,Cellvision)) diff --git a/target/linux/adm5120-2.6/profiles/RB1xx.mk b/target/linux/adm5120-2.6/profiles/RB1xx.mk deleted file mode 100644 index 9dd3de0973..0000000000 --- a/target/linux/adm5120-2.6/profiles/RB1xx.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/RouterBoard - NAME:=RouterBoard RB1xx - PACKAGES:=kmod-madwifi -endef - -define Profile/RouterBoard/Description - Package set compatible with the RouterBoard RB1xx devices. Contains RouterOS to OpenWrt\\\ - installation scripts. -endef -$(eval $(call Profile,RouterBoard)) diff --git a/target/linux/adm5120/Makefile b/target/linux/adm5120/Makefile new file mode 100644 index 0000000000..f8436c04ed --- /dev/null +++ b/target/linux/adm5120/Makefile @@ -0,0 +1,27 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=mipsel +BOARD:=adm5120 +BOARDNAME:=ADM5120 (Little Endian) +FEATURES:=squashfs jffs2 tgz broken + +LINUX_VERSION:=2.6.22.4 + +define Target/Description + Build firmware images for Infineon/ADMtek ADM5120 based boards + (e.g : RouterBoard RB1xx, Compex WP54G-WRT ...) +endef + +include $(INCLUDE_DIR)/kernel-build.mk +DEFAULT_PACKAGES += admswconfig + +# include the profiles +-include profiles/*.mk + +$(eval $(call BuildKernel)) diff --git a/target/linux/adm5120/base-files/default/sbin/wget2nand b/target/linux/adm5120/base-files/default/sbin/wget2nand new file mode 100755 index 0000000000..adb56b946f --- /dev/null +++ b/target/linux/adm5120/base-files/default/sbin/wget2nand @@ -0,0 +1,64 @@ +#!/bin/sh +# wget2nand +# This script can be used to download a TGZ file from your build system which +# contains the files to be installed on the NAND flash on your RB1xx card. +# The one parameter is the URL of the TGZ file to be downloaded. +# Licence GPL V2 +# Author david.goodenough@linkchoose.co.uk +# Based on cf2nand from RB532 support +. /etc/functions.sh + +[ -d /tmp/wget2nand ] && { + echo "/tmp/wget2nand already exists" + exit 1 +} + +# first get an address for br-lan using udhcpc +killall udhcpc +/sbin/udhcpc -i br-lan + +# need to find the wget server from the command line +url=$1 +[ -z "$url" ] && { + echo "No URL specified for image TGZ" + echo "Usage : $0 URL" + exit 1 +} + +boot="$(find_mtd_part 'RouterBoard NAND Boot')" +main="$(find_mtd_part 'rootfs')" +[ -z "$boot" -o -z "$main" ] && { + echo "Cannot find NAND Flash partitions" + exit 1 +} + +echo "Erasing filesystem." +mtd erase Boot 2>/dev/null >/dev/null +mtd erase Main 2>/dev/null >/dev/null + +echo "Mounting $main as new root and $boot as boot partition" + +mkdir /tmp/wget2nand/ +mkdir /tmp/wget2nand-boot +mount -t yaffs2 "$main" /tmp/wget2nand/ +mount -t yaffs2 "$boot" /tmp/wget2nand-boot + +echo "Copying filesystem..." +( wget -O - $url/openwrt-adm5120-2.6-rootfs.tgz) | ( cd /tmp/wget2nand/; tar xvz ) +wget -O /tmp/wget2nand-boot/kernel $url/openwrt-adm5120-2.6-rb1xx-vmlinux + +chmod +x /tmp/wget2nand-boot/kernel + +# make sure everything is written before we unmount the partitions +echo "chmod ugo+x /" > /tmp/wget2nand/etc/uci-defaults/set_root_permission +sync +ls /tmp/wget2nand-boot/ +ls /tmp/wget2nand/ +# unmount the partitions and remove the directories into which they were mounted +umount /tmp/wget2nand-boot +umount /tmp/wget2nand +rmdir /tmp/wget2nand-boot +rmdir /tmp/wget2nand + +# all done +echo "Image written, you can now reboot. Remember to change the boot source to Boot from Nand" diff --git a/target/linux/adm5120/config/default b/target/linux/adm5120/config/default new file mode 100644 index 0000000000..593d98ce4f --- /dev/null +++ b/target/linux/adm5120/config/default @@ -0,0 +1,289 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_ADM5120_CPU_OVERRIDES=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARM_AMBA=y +# CONFIG_ATM_DRIVERS is not set +CONFIG_BASE_SMALL=0 +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_BINFMT_MISC=m +CONFIG_BITREVERSE=y +CONFIG_CIFS_DEBUG2=y +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,yaffs2,jffs2 init=/etc/preinit" +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_DDB5477 is not set +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_ELF_CORE=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_FS_MBCACHE=m +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_ACL=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +# CONFIG_GEN_RTC is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HID=m +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_I2C is not set +# CONFIG_IDE is not set +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_INPUT=y +# CONFIG_INPUT_EVDEV is not set +CONFIG_IPV6_MIP6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IRQ_CPU=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JOLIET is not set +CONFIG_LEDS_ADM5120=y +CONFIG_LEDS_ADM5120_DIAG=y +# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_VR41XX is not set +CONFIG_MII=m +# CONFIG_MINIX_FS is not set +CONFIG_MIPS=y +CONFIG_MIPS_ADM5120=y +CONFIG_MIPS_ADM5120_ENET=y +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_EV64120 is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MIPS_VPE_LOADER is not set +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_ADM5120=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_BLOCK2MTD=y +CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_MYLOADER_PARTS=y +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_RB100=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_NETDEV_1000 is not set +CONFIG_NET_KEY=y +# CONFIG_NET_PCI is not set +# CONFIG_NET_PKTGEN is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PARTITION_ADVANCED is not set +# CONFIG_PCIPCWATCHDOG is not set +CONFIG_PCI_ADM5120=y +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNPACPI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_RTC is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250 is not set +# CONFIG_SERIAL_ADM5120 is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 +CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIO=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +CONFIG_SOFT_WATCHDOG=m +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_TRAD_SIGNALS=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_USB=y +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_USB_ACM is not set +CONFIG_USB_ADM5120_HCD=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_GL620A is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_SERIAL is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_V4L1=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_YAFFS_9BYTE_TAGS=y +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_AUTO_YAFFS2=y +CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0 +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +CONFIG_YAFFS_FS=y +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_YAFFS_YAFFS1=y +CONFIG_YAFFS_YAFFS2=y +# CONFIG_ZD1211RW is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files/arch/mips/adm5120/Kconfig new file mode 100644 index 0000000000..7738d8175b --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/Kconfig @@ -0,0 +1,20 @@ +if MIPS_ADM5120 + +menu "ADM5120 Implementation Options" + +config ADM5120_CPU_OVERRIDES + bool "Enable CPU feature overrides" + default y + +config PCI_ADM5120 + bool "Enable PCI support" + select PCI + default y + +endmenu + +config ARM_AMBA + bool + default y + +endif diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/Makefile new file mode 100644 index 0000000000..bb0a7c8b06 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel +# + +obj-y := setup.o prom.o irq.o memory.o adm5120_info.o +obj-y += board.o +obj-y += clock.o +obj-y += gpio.o +obj-y += platform.o +obj-y += reset.o +obj-y += time.o + +obj-y += trxsplit.o + +EXTRA_AFLAGS := $(CFLAGS) diff --git a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c new file mode 100644 index 0000000000..e2ee5ca565 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c @@ -0,0 +1,93 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include + +unsigned int adm5120_product_code; +unsigned int adm5120_revision; +unsigned int adm5120_package; +unsigned int adm5120_nand_boot; +unsigned long adm5120_speed; + +#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) +#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) + +/* + * CPU settings detection + */ +#define CODE_GET_PC(c) ((c) & CODE_PC_MASK) +#define CODE_GET_REV(c) (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK) +#define CODE_GET_PK(c) (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK) +#define CODE_GET_CLKS(c) (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK) +#define CODE_GET_NAB(c) (((c) & CODE_NAB) != 0) + +void adm5120_ndelay(u32 ns) +{ + u32 t; + + SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); + SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); + + t = (ns+640) / 640; + t &= TIMER_PERIOD_MASK; + SWITCH_WRITE(SWITCH_REG_TIMER, t | TIMER_TE); + + /* wait until the timer expires */ + do { + t = SWITCH_READ(SWITCH_REG_TIMER_INT); + } while ((t & TIMER_INT_TOS) == 0); + + /* leave the timer disabled */ + SWITCH_WRITE(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT); + SWITCH_WRITE(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM)); +} + +void __init adm5120_soc_init(void) +{ + u32 code; + u32 clks; + + code = SWITCH_READ(SWITCH_REG_CODE); + + adm5120_product_code = CODE_GET_PC(code); + adm5120_revision = CODE_GET_REV(code); + adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ? + ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP; + adm5120_nand_boot = CODE_GET_NAB(code); + + clks = CODE_GET_CLKS(code); + adm5120_speed = ADM5120_SPEED_175; + if (clks & 1) + adm5120_speed += 25000000; + if (clks & 2) + adm5120_speed += 50000000; +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/board.c b/target/linux/adm5120/files/arch/mips/adm5120/board.c new file mode 100644 index 0000000000..74bacaa2e8 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/board.c @@ -0,0 +1,129 @@ +/* + * $Id$ + * + * ADM5120 generic board code + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +static LIST_HEAD(adm5120_boards); +static char adm5120_board_name[ADM5120_BOARD_NAMELEN]; + +const char *get_system_type(void) +{ + return adm5120_board_name; +} + +static struct adm5120_board * __init adm5120_board_find(unsigned long machtype) +{ + struct list_head *this; + struct adm5120_board *board; + void *ret; + + ret = NULL; + list_for_each(this, &adm5120_boards) { + board = list_entry(this, struct adm5120_board, list); + if (board->mach_type == machtype) { + ret = board; + break; + } + } + + return ret; +} + +static int __init adm5120_board_setup(void) +{ + struct adm5120_board *board; + int err; + + board = adm5120_board_find(mips_machtype); + if (board == NULL) { + printk(KERN_ALERT "adm5120: no board registered for machtype %lu" + ", trying generic\n", mips_machtype); + board = adm5120_board_find(MACH_ADM5120_GENERIC); + if (board == NULL) + panic("adm5120: unsupported board\n"); + } + + printk(KERN_INFO "adm5120: setting up board '%s'\n", board->name); + + memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN); + + adm5120_board_reset = board->board_reset; + if (board->eth_num_ports > 0) + adm5120_eth_num_ports = board->eth_num_ports; + + if (board->eth_vlans) + memcpy(adm5120_eth_vlans, board->eth_vlans, + sizeof(adm5120_eth_vlans)); + + + if (board->board_setup) + board->board_setup(); + + /* register UARTs */ + amba_device_register(&adm5120_uart0_device, &iomem_resource); + amba_device_register(&adm5120_uart1_device, &iomem_resource); + + /* register PCI controller */ + if (adm5120_package_bga()) + platform_device_register(&adm5120_pci_device); + + /* register board devices */ + if (board->num_devices > 0 && board->devices != NULL ) { + err = platform_add_devices(board->devices, board->num_devices); + if (err) + printk(KERN_ALERT "adm5120: adding board devices failed\n"); + } + + return 0; +} + +void __init adm5120_board_register(struct adm5120_board *board) +{ + list_add(&board->list, &adm5120_boards); + printk(KERN_INFO "adm5120: registered board '%s'\n", board->name); +} + +void __init adm5120_register_boards(struct adm5120_board **boards, + int num) +{ + int i; + + for (i=0; i + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include + +#include +#include + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN5, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN5, 1); + break; + } +} + +static struct mtd_partition cas6xx_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 32*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "nvfs1", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "nvfs2", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct mtd_partition cas7xx_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 32*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "nvfs", + .offset = MTDPART_OFS_APPEND, + .size = 128*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_device *cas6xx_devices[] __initdata = { + &adm5120_flash0_device, +}; + +static struct platform_device *cas7xx_devices[] __initdata = { + &adm5120_flash0_device, +}; + +static void __init cas6xx_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions); + adm5120_flash0_data.parts = cas6xx_partitions; + + /* TODO: setup mac address */ +} + +static void __init cas7xx_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions); + adm5120_flash0_data.parts = cas7xx_partitions; + + /* TODO: setup mac address */ +} + +static struct adm5120_board cas630_board __initdata = { + .mach_type = MACH_ADM5120_CAS630, + .name = "Cellvision CAS-630/630W", + .board_setup = cas6xx_setup, + .eth_num_ports = 1, + .num_devices = ARRAY_SIZE(cas6xx_devices), + .devices = cas6xx_devices, +}; + +static struct adm5120_board cas670_board __initdata = { + .mach_type = MACH_ADM5120_CAS670, + .name = "Cellvision CAS-670/670W", + .board_setup = cas6xx_setup, + .eth_num_ports = 1, + .num_devices = ARRAY_SIZE(cas6xx_devices), + .devices = cas6xx_devices, +}; + +static struct adm5120_board cas700_board __initdata = { + .mach_type = MACH_ADM5120_CAS700, + .name = "Cellvision CAS-700/700W", + .board_setup = cas7xx_setup, + .eth_num_ports = 1, + .num_devices = ARRAY_SIZE(cas7xx_devices), + .devices = cas7xx_devices, +}; + +static struct adm5120_board cas771_board __initdata = { + .mach_type = MACH_ADM5120_CAS771, + .name = "Cellvision CAS-771/771W", + .board_setup = cas7xx_setup, + .eth_num_ports = 1, + .num_devices = ARRAY_SIZE(cas7xx_devices), + .devices = cas7xx_devices, +}; + +static struct adm5120_board cas790_board __initdata = { + .mach_type = MACH_ADM5120_CAS790, + .name = "Cellvision CAS-790", + .board_setup = cas7xx_setup, + .eth_num_ports = 1, + .num_devices = ARRAY_SIZE(cas7xx_devices), + .devices = cas7xx_devices, +}; + +static struct adm5120_board cas861_board __initdata = { + .mach_type = MACH_ADM5120_CAS861, + .name = "Cellvision CAS-861/861W", + .board_setup = cas7xx_setup, + .eth_num_ports = 1, + .num_devices = ARRAY_SIZE(cas7xx_devices), + .devices = cas7xx_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&cas630_board); + adm5120_board_register(&cas670_board); + adm5120_board_register(&cas700_board); + adm5120_board_register(&cas771_board); + adm5120_board_register(&cas790_board); + adm5120_board_register(&cas861_board); + return 0; +} + +pure_initcall(register_boards); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c new file mode 100644 index 0000000000..620179744e --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c @@ -0,0 +1,222 @@ +/* + * $Id$ + * + * Compex boards + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include + +#include +#include + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN5, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN5, 1); + break; + } +} + +static void wp54_reset(void) +{ + gpio_set_value(ADM5120_GPIO_PIN3, 0); +} + +static struct mtd_partition wp54g_wrt_partitions[] = { + { + .name = "cfe", + .offset = 0, + .size = 0x050000, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "trx", + .offset = MTDPART_OFS_APPEND, + .size = 0x3A0000, + } , { + .name = "nvram", + .offset = MTDPART_OFS_APPEND, + .size = 0x010000, + } +}; + +static struct platform_device *np2xg_devices[] __initdata = { + &adm5120_flash0_device, + &adm5120_usbc_device, +}; + +static struct platform_device *wp54_devices[] __initdata = { + &adm5120_flash0_device, +}; + +static void __init np2xg_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + + /* TODO: setup mac address */ +} + +static void __init wp54_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ + gpio_direction_output(ADM5120_GPIO_PIN3, 1); + + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + + /* TODO: setup mac address */ +} + +static void __init wp54_wrt_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */ + gpio_direction_output(ADM5120_GPIO_PIN3, 1); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions); + adm5120_flash0_data.parts = wp54g_wrt_partitions; + + /* TODO: setup mac address */ +} + +unsigned char np27g_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +unsigned char np28g_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x42, 0x44, 0x48, 0x00, 0x00 +}; + +unsigned char wp54_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x42, 0x00, 0x00, 0x00, 0x00 +}; + +static struct adm5120_board np27g_board __initdata = { + .mach_type = MACH_ADM5120_NP27G, + .name = "Compex NetPassage 27G", + .board_setup = np2xg_setup, + .eth_num_ports = 5, + .eth_vlans = np27g_vlans, + .num_devices = ARRAY_SIZE(np2xg_devices), + .devices = np2xg_devices, +}; + +static struct adm5120_board np28g_board __initdata = { + .mach_type = MACH_ADM5120_NP28G, + .name = "Compex NetPassage 28G", + .board_setup = np2xg_setup, + .eth_num_ports = 4, + .eth_vlans = np28g_vlans, + .num_devices = ARRAY_SIZE(np2xg_devices), + .devices = np2xg_devices, +}; + +static struct adm5120_board wp54ag_board __initdata = { + .mach_type = MACH_ADM5120_WP54AG, + .name = "Compex WP54AG", + .board_setup = wp54_setup, + .board_reset = wp54_reset, + .eth_num_ports = 2, + .eth_vlans = wp54_vlans, + .num_devices = ARRAY_SIZE(wp54_devices), + .devices = wp54_devices, +}; + +static struct adm5120_board wp54g_board __initdata = { + .mach_type = MACH_ADM5120_WP54G, + .name = "Compex WP54G", + .board_setup = wp54_setup, + .board_reset = wp54_reset, + .eth_num_ports = 2, + .eth_vlans = wp54_vlans, + .num_devices = ARRAY_SIZE(wp54_devices), + .devices = wp54_devices, +}; + +static struct adm5120_board wp54g_wrt_board __initdata = { + .mach_type = MACH_ADM5120_WP54G, + .name = "Compex WP54G-WRT", + .board_setup = wp54_wrt_setup, + .board_reset = wp54_reset, + .eth_num_ports = 2, + .eth_vlans = wp54_vlans, + .num_devices = ARRAY_SIZE(wp54_devices), + .devices = wp54_devices, +}; + +static struct adm5120_board wpp54ag_board __initdata = { + .mach_type = MACH_ADM5120_WPP54AG, + .name = "Compex WPP54AG", + .board_setup = wp54_setup, + .board_reset = wp54_reset, + .eth_num_ports = 2, + .eth_vlans = wp54_vlans, + .num_devices = ARRAY_SIZE(wp54_devices), + .devices = wp54_devices, +}; + +static struct adm5120_board wpp54g_board __initdata = { + .mach_type = MACH_ADM5120_WPP54G, + .name = "Compex WPP54G", + .board_setup = wp54_setup, + .board_reset = wp54_reset, + .eth_num_ports = 2, + .eth_vlans = wp54_vlans, + .num_devices = ARRAY_SIZE(wp54_devices), + .devices = wp54_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&np27g_board); + adm5120_board_register(&np28g_board); + adm5120_board_register(&wp54ag_board); + adm5120_board_register(&wp54g_board); + adm5120_board_register(&wp54g_wrt_board); + adm5120_board_register(&wpp54ag_board); + adm5120_board_register(&wpp54g_board); + return 0; +} + +pure_initcall(register_boards); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c new file mode 100644 index 0000000000..a184cbce44 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c @@ -0,0 +1,84 @@ +/* + * $Id$ + * + * Edimax boards + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include + +#include +#include + +static struct mtd_partition br6104k_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 32*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "config", + .offset = MTDPART_OFS_APPEND, + .size = 32*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_device *br6104k_devices[] __initdata = { + &adm5120_flash0_device, +}; + +static void __init br6104k_setup(void) { + /* setup data for flash0 device */ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(br6104k_partitions); + adm5120_flash0_data.parts = br6104k_partitions; + + /* TODO: setup mac addresses, if possible */ +} + +unsigned char br6104k_vlans[6] = { + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; + +static struct adm5120_board br6104k_board __initdata = { + .mach_type = MACH_ADM5120_BR6104K, + .name = "Edimax BR-6104K", + .board_setup = br6104k_setup, + .eth_num_ports = 5, + .eth_vlans = br6104k_vlans, + .num_devices = ARRAY_SIZE(br6104k_devices), + .devices = br6104k_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&br6104k_board); + return 0; +} + +pure_initcall(register_boards); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c new file mode 100644 index 0000000000..de78ca40ea --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c @@ -0,0 +1,53 @@ +/* + * $Id$ + * + * Generic ADM5120 based board + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include + +#include +#include + +static struct platform_device *generic_devices[] __initdata = { + &adm5120_flash0_device, +}; + +static struct adm5120_board generic_board __initdata = { + .mach_type = MACH_ADM5120_GENERIC, + .name = "Generic ADM5120 board", + .eth_num_ports = 6, + .num_devices = ARRAY_SIZE(generic_devices), + .devices = generic_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&generic_board); + return 0; +} + +pure_initcall(register_boards); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c new file mode 100644 index 0000000000..ebeb5aa87b --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c @@ -0,0 +1,167 @@ +/* + * $Id$ + * + * Infineon boards + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include + +#include +#include + +static void switch_bank_gpio3(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN3, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN3, 1); + break; + } +} + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN5, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN5, 1); + break; + } +} + +static struct mtd_partition easy_partitions[] = { + { + .name = "admboot", + .offset = 0, + .size = 64*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "boardcfg", + .offset = MTDPART_OFS_APPEND, + .size = 64*1024, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_device *easy5120pata_devices[] __initdata = { + &adm5120_flash0_device, + /* TODO: add VINETIC2 device? */ +}; + +static struct platform_device *easy5120rt_devices[] __initdata = { + &adm5120_flash0_device, + &adm5120_usbc_device +}; + +static struct platform_device *easy5120wvoip_devices[] __initdata = { + &adm5120_flash0_device, + /* TODO: add VINETIC2 device? */ +}; + +static struct platform_device *easy83000_devices[] __initdata = { + &adm5120_flash0_device, + /* TODO: add VINAX device? */ +}; + +static void __init easy_setup_pqfp(void) +{ + gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN3, 0); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio3; + adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); + adm5120_flash0_data.parts = easy_partitions; + + /* TODO: setup mac addresses */ +} + +static void __init easy_setup_bga(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions); + adm5120_flash0_data.parts = easy_partitions; + + /* TODO: setup mac addresses */ +} + +static struct adm5120_board easy5120pata_board __initdata = { + .mach_type = MACH_ADM5120_EASY5120PATA, + .name = "Infineon EASY 5120P-ATA Reference Board", + .board_setup = easy_setup_pqfp, + .eth_num_ports = 6, + .num_devices = ARRAY_SIZE(easy5120pata_devices), + .devices = easy5120pata_devices, +}; + +static struct adm5120_board easy5120rt_board __initdata = { + .mach_type = MACH_ADM5120_EASY5120RT, + .name = "Infineon EASY 5120-RT Reference Board", + .board_setup = easy_setup_bga, + .eth_num_ports = 5, + .num_devices = ARRAY_SIZE(easy5120rt_devices), + .devices = easy5120rt_devices, +}; + +static struct adm5120_board easy5120wvoip_board __initdata = { + .mach_type = MACH_ADM5120_EASY5120WVOIP, + .name = "Infineon EASY 5120-WVoIP Reference Board", + .board_setup = easy_setup_bga, + .eth_num_ports = 6, + .num_devices = ARRAY_SIZE(easy5120wvoip_devices), + .devices = easy5120wvoip_devices, +}; + +static struct adm5120_board easy83000_board __initdata = { + .mach_type = MACH_ADM5120_EASY83000, + .name = "Infineon EASY 83000 Reference Board", + .board_setup = easy_setup_pqfp, + .eth_num_ports = 6, + .num_devices = ARRAY_SIZE(easy83000_devices), + .devices = easy83000_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&easy5120pata_board); + adm5120_board_register(&easy5120rt_board); + adm5120_board_register(&easy5120wvoip_board); + adm5120_board_register(&easy83000_board); + return 0; +} + +pure_initcall(register_boards); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c new file mode 100644 index 0000000000..f233772d0d --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c @@ -0,0 +1,172 @@ +/* + * $Id$ + * + * Mikrotik RouterBOARDs 111/112/133/133C/150/153 + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include + +#include +#include + +static struct mtd_partition rb1xx_partitions[] = { + { + .name = "booter", + .offset = 0, + .size = 64*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "firmware", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_device *rb1xx_devices[] __initdata = { + &adm5120_flash0_device, + &adm5120_nand_device, +}; + +static struct platform_device *rb150_devices[] __initdata = { + &adm5120_flash0_device, + /* TODO: nand device is not yet supported */ +}; + +static void __init rb1xx_setup(void) +{ + /* setup data for flash0 device */ + adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions); + adm5120_flash0_data.parts = rb1xx_partitions; + + /* TODO: setup mac address */ +} + +#if 0 +/* + * RB1xx boards have bad network performance with the default VLAN matrixes. + * Disable it while the ethernet driver gets fixed. + */ +static unsigned char rb11x_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static unsigned char rb133_vlans[6] __initdata = { + /* FIXME: untested */ + 0x44, 0x42, 0x41, 0x00, 0x00, 0x00 +}; + +static unsigned char rb133c_vlans[6] __initdata = { + /* FIXME: untested */ + 0x44, 0x00, 0x00, 0x00, 0x00, 0x00 +}; + +static unsigned char rb15x_vlans[6] __initdata = { + /* FIXME: untested */ + 0x41, 0x42, 0x44, 0x48, 0x50, 0x00 +}; +#else +static unsigned char rb_vlans[6] __initdata = { + 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00 +}; +#define rb11x_vlans rb_vlans +#define rb133_vlans rb_vlans +#define rb133c_vlans rb_vlans +#define rb15x_vlans rb_vlans +#endif + +static struct adm5120_board rb111_board __initdata = { + .mach_type = MACH_ADM5120_RB_111, + .name = "Mikrotik RouterBOARD 111", + .board_setup = rb1xx_setup, + .eth_num_ports = 1, + .eth_vlans = rb11x_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb112_board __initdata = { + .mach_type = MACH_ADM5120_RB_112, + .name = "Mikrotik RouterBOARD 112", + .board_setup = rb1xx_setup, + .eth_num_ports = 1, + .eth_vlans = rb11x_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb133_board __initdata = { + .mach_type = MACH_ADM5120_RB_133, + .name = "Mikrotik RouterBOARD 133", + .board_setup = rb1xx_setup, + .eth_num_ports = 3, + .eth_vlans = rb133_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb133c_board __initdata = { + .mach_type = MACH_ADM5120_RB_133C, + .name = "Mikrotik RouterBOARD 133C", + .board_setup = rb1xx_setup, + .eth_num_ports = 1, + .eth_vlans = rb133c_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static struct adm5120_board rb150_board __initdata = { + .mach_type = MACH_ADM5120_RB_150, + .name = "Mikrotik RouterBOARD 150", + .board_setup = rb1xx_setup, + .eth_num_ports = 5, + .eth_vlans = rb15x_vlans, + .num_devices = ARRAY_SIZE(rb150_devices), + .devices = rb150_devices, +}; + +static struct adm5120_board rb153_board __initdata = { + .mach_type = MACH_ADM5120_RB_153, + .name = "Mikrotik RouterBOARD 153", + .board_setup = rb1xx_setup, + .eth_num_ports = 5, + .eth_vlans = rb15x_vlans, + .num_devices = ARRAY_SIZE(rb1xx_devices), + .devices = rb1xx_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&rb111_board); + adm5120_board_register(&rb112_board); + adm5120_board_register(&rb133_board); + adm5120_board_register(&rb133c_board); + adm5120_board_register(&rb150_board); + adm5120_board_register(&rb153_board); + return 0; +} + +pure_initcall(register_boards); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c new file mode 100644 index 0000000000..0a60205ebf --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c @@ -0,0 +1,127 @@ +/* + * $Id$ + * + * ZyXEL Prestige P-334/P-335 boards + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include + +#include +#include + +static void switch_bank_gpio5(unsigned bank) +{ + switch (bank) { + case 0: + gpio_set_value(ADM5120_GPIO_PIN5, 0); + break; + case 1: + gpio_set_value(ADM5120_GPIO_PIN5, 1); + break; + } +} + +static struct mtd_partition p33x_partitions[] = { + { + .name = "bootbase", + .offset = 0, + .size = 16*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "rom", + .offset = MTDPART_OFS_APPEND, + .size = 16*1024, + } , { + .name = "bootext", + .offset = MTDPART_OFS_APPEND, + .size = 96*1024, + .mask_flags = MTD_WRITEABLE, + } , { + .name = "trx", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + } , { + .name = "firmware", + .offset = 32*1024, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct platform_device *p334_devices[] __initdata = { + &adm5120_flash0_device, +}; + +static struct platform_device *p335_devices[] __initdata = { + &adm5120_flash0_device, + &adm5120_usbc_device, +}; + +static void __init p33x_setup(void) +{ + gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */ + gpio_direction_output(ADM5120_GPIO_PIN5, 0); + + /* setup data for flash0 device */ + adm5120_flash0_data.switch_bank = switch_bank_gpio5; + adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions); + adm5120_flash0_data.parts = p33x_partitions; + + /* TODO: setup mac address */ +} + +unsigned char p33x_vlans[6] __initdata = { + /* FIXME: untested */ + 0x50, 0x48, 0x44, 0x42, 0x41, 0x00 +}; + +static struct adm5120_board p334wt_board __initdata = { + .mach_type = MACH_ADM5120_P334WT, + .name = "ZyXEL Prestige 334WT", + .board_setup = p33x_setup, + .eth_num_ports = 5, + .eth_vlans = p33x_vlans, + .num_devices = ARRAY_SIZE(p334_devices), + .devices = p334_devices, +}; + +static struct adm5120_board p335_board __initdata = { + .mach_type = MACH_ADM5120_P335, + .name = "ZyXEL Prestige 335/335WT", + .board_setup = p33x_setup, + .eth_num_ports = 5, + .eth_vlans = p33x_vlans, + .num_devices = ARRAY_SIZE(p335_devices), + .devices = p335_devices, +}; + +static int __init register_boards(void) +{ + adm5120_board_register(&p334wt_board); + adm5120_board_register(&p335_board); + return 0; +} + +pure_initcall(register_boards); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/clock.c b/target/linux/adm5120/files/arch/mips/adm5120/clock.c new file mode 100644 index 0000000000..4a8b69b4cb --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/clock.c @@ -0,0 +1,76 @@ +/* + * $Id$ + * + * ADM5120 minimal CLK API implementation + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This file was based on the CLK API implementation in: + * arch/mips/tx4938/toshiba_rbtx4938/setup.c + * Copyright (C) 2000-2001 Toshiba Corporation + * 2003-2005 (c) MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include + +#include + +struct clk { + unsigned long rate; +}; + +static struct clk uart_clk = { + .rate = ADM5120_UART_CLOCK +}; + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "UARTCLK")) + return &uart_clk; + + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c new file mode 100644 index 0000000000..d073b659ad --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c @@ -0,0 +1,356 @@ +/* + * $Id$ + * + * ADM5120 GPIO support + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include + +typedef void __iomem * gpio_reg_t; +#define GPIO_READ(r) readl((r)) +#define GPIO_WRITE(v,r) writel((v),(r)) +#define GPIO_REG(r) (gpio_reg_t)(KSEG1ADDR(ADM5120_SWITCH_BASE)+r) + +struct adm5120_gpio_line { + u32 flags; + const char *label; +}; + +#define GPIO_FLAG_VALID 0x01 +#define GPIO_FLAG_USED 0x02 + +struct led_desc { + gpio_reg_t reg; /* LED register address */ + u8 iv_shift; /* shift amount for input bit */ + u8 mode_shift; /* shift amount for mode bits */ +}; + +#define LED_DESC(_port,_led) { \ + .reg = GPIO_REG(SWITCH_REG_PORT0_LED+_port*4), \ + .iv_shift = LED0_IV_SHIFT+_led, \ + .mode_shift = _led*4 \ + } + +static struct led_desc led_table[15] = { + LED_DESC(0, 0), LED_DESC(0, 1), LED_DESC(0, 2), + LED_DESC(1, 0), LED_DESC(1, 1), LED_DESC(1, 2), + LED_DESC(2, 0), LED_DESC(2, 1), LED_DESC(2, 2), + LED_DESC(3, 0), LED_DESC(3, 1), LED_DESC(3, 2), + LED_DESC(4, 0), LED_DESC(4, 1), LED_DESC(4, 2) +}; + +static struct adm5120_gpio_line adm5120_gpio_map[ADM5120_GPIO_COUNT] = { + [ADM5120_GPIO_PIN0] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_PIN1] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_PIN2] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_PIN3] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_PIN4] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_PIN5] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_PIN6] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_PIN7] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P0L0] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P0L1] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P0L2] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P1L0] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P1L1] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P1L2] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P2L0] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P2L1] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P2L2] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P3L0] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P3L1] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P3L2] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P4L0] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P4L1] = {.flags = GPIO_FLAG_VALID}, + [ADM5120_GPIO_P4L2] = {.flags = GPIO_FLAG_VALID} +}; + +#define gpio_is_invalid(g) ( \ + (g) > ADM5120_GPIO_MAX || \ + ((adm5120_gpio_map[(g)].flags & GPIO_FLAG_VALID) == 0) \ + ) + +#define gpio_is_used(g) ((adm5120_gpio_map[(g)].flags & GPIO_FLAG_USED) != 0) + +/* + * Helpers for GPIO lines in GPIO_CONF0 register + */ +#define PIN_IM(p) ((1 << GPIO_CONF0_IM_SHIFT) << p) +#define PIN_IV(p) ((1 << GPIO_CONF0_IV_SHIFT) << p) +#define PIN_OE(p) ((1 << GPIO_CONF0_OE_SHIFT) << p) +#define PIN_OV(p) ((1 << GPIO_CONF0_OV_SHIFT) << p) + +static inline int pins_direction_input(unsigned pin) +{ + gpio_reg_t *reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = GPIO_READ(reg); + t &= ~(PIN_OE(pin)); + t |= PIN_IM(pin); + GPIO_WRITE(t,reg); + + return 0; +} + +static inline int pins_direction_output(unsigned pin, int value) +{ + gpio_reg_t *reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = GPIO_READ(reg); + t &= ~(PIN_IM(pin) | PIN_OV(pin)); + t |= PIN_OE(pin); + + if (value) + t |= PIN_OV(pin); + + GPIO_WRITE(t,reg); + + return 0; +} + +static inline int pins_get_value(unsigned pin) +{ + gpio_reg_t *reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = GPIO_READ(reg); + if ((t & PIN_IM(pin)) != 0) + t &= PIN_IV(pin); + else + t &= PIN_OV(pin); + + return (t) ? 1 : 0; +} + +static inline void pins_set_value(unsigned pin, int value) +{ + gpio_reg_t *reg; + u32 t; + + reg = GPIO_REG(SWITCH_REG_GPIO_CONF0); + + t = GPIO_READ(reg); + if (value == 0) + t &= ~(PIN_OV(pin)); + else + t |= PIN_OV(pin); + + GPIO_WRITE(t,reg); +} + +/* + * Helpers for GPIO lines in PORTx_LED registers + */ +static inline int leds_direction_input(unsigned led) +{ + gpio_reg_t *reg; + u32 t; + + reg = led_table[led].reg; + t = GPIO_READ(reg); + t &= ~(LED_MODE_MASK << led_table[led].mode_shift); + GPIO_WRITE(t,reg); + + return 0; +} + +static inline int leds_direction_output(unsigned led, int value) +{ + gpio_reg_t *reg; + u32 t, s; + + reg = led_table[led].reg; + s = led_table[led].mode_shift; + + t = GPIO_READ(reg); + t &= ~(LED_MODE_MASK << s); + + switch (value) { + case ADM5120_GPIO_LOW: + t |= (LED_MODE_OUT_LOW << s); + break; + case ADM5120_GPIO_FLASH: + case ADM5120_GPIO_LINK: + case ADM5120_GPIO_SPEED: + case ADM5120_GPIO_DUPLEX: + case ADM5120_GPIO_ACT: + case ADM5120_GPIO_COLL: + case ADM5120_GPIO_LINK_ACT: + case ADM5120_GPIO_DUPLEX_COLL: + case ADM5120_GPIO_10M_ACT: + case ADM5120_GPIO_100M_ACT: + t |= ((value & LED_MODE_MASK) << s); + break; + default: + t |= (LED_MODE_OUT_HIGH << s); + break; + } + + GPIO_WRITE(t,reg); + + return 0; +} + +static inline int leds_get_value(unsigned led) +{ + gpio_reg_t *reg; + u32 t, m; + + reg = led_table[led].reg; + + t = GPIO_READ(reg); + m = (t >> led_table[led].mode_shift) & LED_MODE_MASK; + if (m == LED_MODE_INPUT) + return (t >> led_table[led].iv_shift) & 1; + + if (m == LED_MODE_OUT_LOW) + return 0; + + return 1; +} + +/* + * Main GPIO support routines + */ +int adm5120_gpio_direction_input(unsigned gpio) +{ + if (gpio_is_invalid(gpio)) + return -EINVAL; + + if (gpio < ADM5120_GPIO_P0L0) + return pins_direction_input(gpio); + + gpio -= ADM5120_GPIO_P0L0; + return leds_direction_input(gpio); +} + +int adm5120_gpio_direction_output(unsigned gpio, int value) +{ + if (gpio_is_invalid(gpio)) + return -EINVAL; + + if (gpio < ADM5120_GPIO_P0L0) + return pins_direction_output(gpio, value); + + gpio -= ADM5120_GPIO_P0L0; + return leds_direction_output(gpio, value); +} + +int adm5120_gpio_get_value(unsigned gpio) +{ + if (gpio < ADM5120_GPIO_P0L0) + return pins_get_value(gpio); + + gpio -= ADM5120_GPIO_P0L0; + return leds_get_value(gpio); +} + +void adm5120_gpio_set_value(unsigned gpio, int value) +{ + if (gpio < ADM5120_GPIO_P0L0) { + pins_set_value(gpio, value); + return; + } + + gpio -= ADM5120_GPIO_P0L0; + leds_direction_output(gpio, value); +} + +int adm5120_gpio_request(unsigned gpio, const char *label) +{ + if (gpio_is_invalid(gpio)) + return -EINVAL; + + if (gpio_is_used(gpio)) + return -EBUSY; + + adm5120_gpio_map[gpio].flags |= GPIO_FLAG_USED; + adm5120_gpio_map[gpio].label = label; + + return 0; +} + +void adm5120_gpio_free(unsigned gpio) +{ + if (gpio_is_invalid(gpio)) + return; + + adm5120_gpio_map[gpio].flags &= ~GPIO_FLAG_USED; + adm5120_gpio_map[gpio].label = NULL; +} + +int adm5120_gpio_to_irq(unsigned gpio) +{ + /* FIXME: not yet implemented */ + return -EINVAL; +} + +int adm5120_irq_to_gpio(unsigned irq) +{ + /* FIXME: not yet implemented */ + return -EINVAL; +} + +static int __init adm5120_gpio_init(void) +{ + int i; + + if (adm5120_package_pqfp()) { + /* GPIO pins 4-7 are unavailable in ADM5120P */ + for (i=ADM5120_GPIO_PIN4; i<=ADM5120_GPIO_PIN7; i++) + adm5120_gpio_map[i].flags &= ~GPIO_FLAG_VALID; + } + + return 0; +} + +pure_initcall(adm5120_gpio_init); + +EXPORT_SYMBOL(adm5120_gpio_direction_output); +EXPORT_SYMBOL(adm5120_gpio_direction_input); +EXPORT_SYMBOL(adm5120_gpio_get_value); +EXPORT_SYMBOL(adm5120_gpio_set_value); +EXPORT_SYMBOL(adm5120_gpio_request); +EXPORT_SYMBOL(adm5120_gpio_free); +EXPORT_SYMBOL(adm5120_gpio_to_irq); +EXPORT_SYMBOL(adm5120_irq_to_gpio); diff --git a/target/linux/adm5120/files/arch/mips/adm5120/irq.c b/target/linux/adm5120/files/arch/mips/adm5120/irq.c new file mode 100644 index 0000000000..8d6fbe6a3c --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/irq.c @@ -0,0 +1,203 @@ +/* + * $Id$ + * + * ADM5120 specific interrupt handlers + * + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include + +#define INTC_REG(r) (*(volatile u32 *)(KSEG1ADDR(ADM5120_INTC_BASE) + r)) + +static void adm5120_intc_irq_unmask(unsigned int irq); +static void adm5120_intc_irq_mask(unsigned int irq); +static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type); + +static struct irq_chip adm5120_intc_irq_chip = { +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) + .name = "INTC", +#else + .typename = "INTC", +#endif + .unmask = adm5120_intc_irq_unmask, + .mask = adm5120_intc_irq_mask, + .mask_ack = adm5120_intc_irq_mask, + .set_type = adm5120_intc_irq_set_type +}; + +static struct irqaction adm5120_intc_irq_action = { + .handler = no_action, + .name = "cascade [INTC]" +}; + +static void adm5120_intc_irq_unmask(unsigned int irq) +{ + unsigned long flags; + + irq -= ADM5120_INTC_IRQ_BASE; + local_irq_save(flags); + INTC_REG(INTC_REG_IRQ_ENABLE) = (1 << irq); + local_irq_restore(flags); +} + +static void adm5120_intc_irq_mask(unsigned int irq) +{ + unsigned long flags; + + irq -= ADM5120_INTC_IRQ_BASE; + local_irq_save(flags); + INTC_REG(INTC_REG_IRQ_DISABLE) = (1 << irq); + local_irq_restore(flags); +} + +static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type) +{ + /* TODO: not yet tested */ +#if 1 + unsigned int sense; + unsigned long mode; + int err; + + err = 0; + sense = flow_type & (IRQ_TYPE_SENSE_MASK); + switch (sense) { + case IRQ_TYPE_NONE: + case IRQ_TYPE_LEVEL_HIGH: + break; + case IRQ_TYPE_LEVEL_LOW: + switch (irq) { + case ADM5120_IRQ_GPIO2: + case ADM5120_IRQ_GPIO4: + break; + default: + err = -EINVAL; + break; + } + break; + default: + err = -EINVAL; + break; + } + + if (err) + return err; + + switch (irq) { + case ADM5120_IRQ_GPIO2: + case ADM5120_IRQ_GPIO4: + mode = INTC_REG(INTC_REG_INT_MODE); + if (sense == IRQ_TYPE_LEVEL_LOW) + mode |= (1 << (irq-ADM5120_INTC_IRQ_BASE)); + else + mode &= (1 << (irq-ADM5120_INTC_IRQ_BASE)); + + INTC_REG(INTC_REG_INT_MODE) = mode; + /* fallthrogh */ + default: + irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK; + irq_desc[irq].status |= sense; + break; + } +#endif + return 0; +} + +static void adm5120_intc_irq_dispatch(void) +{ + unsigned long status; + int irq; + +#if 1 + /* dispatch only one IRQ at a time */ + status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL; + + if (status) { + irq = ADM5120_INTC_IRQ_BASE+fls(status)-1; + do_IRQ(irq); + } else + spurious_interrupt(); +#else + status = INTC_REG(INTC_REG_IRQ_STATUS) & INTC_INT_ALL; + if (status) { + for (irq=ADM5120_INTC_IRQ_BASE; irq <= ADM5120_INTC_IRQ_BASE + + INTC_IRQ_LAST; irq++, status >>=1) { + if ((status & 1) == 1) + do_IRQ(irq); + } + } else + spurious_interrupt(); +#endif +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned long pending; + + pending = read_c0_status() & read_c0_cause(); + + if (pending & STATUSF_IP7) + do_IRQ(ADM5120_IRQ_COUNTER); + else if (pending & STATUSF_IP2) + adm5120_intc_irq_dispatch(); + else + spurious_interrupt(); +} + +#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED) +static void __init adm5120_intc_irq_init(int base) +{ + int i; + + /* disable all interrupts */ + INTC_REG(INTC_REG_IRQ_DISABLE) = INTC_INT_ALL; + /* setup all interrupts to generate IRQ instead of FIQ */ + INTC_REG(INTC_REG_INT_MODE) = 0; + /* set active level for all external interrupts to HIGH */ + INTC_REG(INTC_REG_INT_LEVEL) = 0; + /* disable usage of the TEST_SOURCE register */ + INTC_REG(INTC_REG_IRQ_SOURCE_SELECT) = 0; + + for(i=ADM5120_INTC_IRQ_BASE; i <= ADM5120_INTC_IRQ_BASE+INTC_IRQ_LAST; + i++) { + irq_desc[i].status = INTC_IRQ_STATUS; + set_irq_chip_and_handler(i, &adm5120_intc_irq_chip, + handle_level_irq); + } + + setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action); +} + +void __init arch_init_irq(void) { + mips_cpu_irq_init(); + adm5120_intc_irq_init(ADM5120_INTC_IRQ_BASE); +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/memory.c b/target/linux/adm5120/files/arch/mips/adm5120/memory.c new file mode 100644 index 0000000000..1bde6b02d5 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/memory.c @@ -0,0 +1,179 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) +#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) + +#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) +#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) + +#if 1 +# define mem_dbg(f, a...) printk("mem_detect: " f, ## a) +#else +# define mem_dbg(f, a...) +#endif + +#define MEM_WR_DELAY 10000 /* 0.01 usec */ + +unsigned long adm5120_memsize; + +static int __init mem_check_pattern(u8 *addr, unsigned long offs) +{ + volatile u32 *p1 = (volatile u32 *)addr; + volatile u32 *p2 = (volatile u32 *)(addr+offs); + u32 t,u,v; + + /* save original value */ + t = *p1; + u = *p2; + + if (t != u) + return 0; + + v = 0x55555555; + if (u == v) + v = 0xAAAAAAAA; + + mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1); + + *p1 = v; + mem_dbg("delay %d ns\n", MEM_WR_DELAY); + adm5120_ndelay(MEM_WR_DELAY); + u = *p2; + + mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u); + + /* restore original value */ + *p1 = t; + + return (v == u); +} + +static void __init adm5120_detect_memsize(void) +{ + u32 memctrl; + u32 size, maxsize; + u8 *p; + + memctrl = SWITCH_READ(SWITCH_REG_MEMCTRL); + switch (memctrl & MEMCTRL_SDRS_MASK) { + case MEMCTRL_SDRS_4M: + maxsize = 4 << 20; + break; + case MEMCTRL_SDRS_8M: + maxsize = 8 << 20; + break; + case MEMCTRL_SDRS_16M: + maxsize = 16 << 20; + break; + default: + maxsize = 64 << 20; + break; + } + + /* disable buffers for both SDRAM banks */ + mem_dbg("disable buffers for both banks\n"); + MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) & ~DC_BE); + MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) & ~DC_BE); + + mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20); + + /* detect size of the 1st SDRAM bank */ + p = (u8 *)KSEG1ADDR(0); + for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) { + if (mem_check_pattern(p, size)) { + /* mirrored address */ + mem_dbg("mirrored data found at offset 0x%08X\n", size); + break; + } + } + + mem_dbg("chip size in 1st bank is %uMB\n", size >> 20); + adm5120_memsize = size; + + if (size != maxsize) + /* 2nd bank is not supported */ + goto out; + + if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0) + /* 2nd bank is disabled */ + goto out; + + /* + * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip + * are missing. + */ + mem_dbg("check presence of 2nd bank\n"); + + p = (u8 *)KSEG1ADDR(maxsize+size-4); + if (mem_check_pattern(p, 0)) { + adm5120_memsize += size; + } + + if (maxsize != size) { + /* adjusting MECTRL register */ + memctrl &= ~(MEMCTRL_SDRS_MASK); + switch (size>>20) { + case 4: + memctrl |= MEMCTRL_SDRS_4M; + break; + case 8: + memctrl |= MEMCTRL_SDRS_8M; + break; + case 16: + memctrl |= MEMCTRL_SDRS_16M; + break; + default: + memctrl |= MEMCTRL_SDRS_64M; + break; + } + SWITCH_WRITE(SWITCH_REG_MEMCTRL, memctrl); + } + +out: + /* reenable buffer for both SDRAM banks */ + mem_dbg("enable buffers for both banks\n"); + MPMC_WRITE(MPMC_REG_DC0, MPMC_READ(MPMC_REG_DC0) | DC_BE); + MPMC_WRITE(MPMC_REG_DC1, MPMC_READ(MPMC_REG_DC1) | DC_BE); + + mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 , + size >>20); +} + +void __init adm5120_mem_init(void) +{ + adm5120_detect_memsize(); + add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM); +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/platform.c b/target/linux/adm5120/files/arch/mips/adm5120/platform.c new file mode 100644 index 0000000000..a79893d540 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/platform.c @@ -0,0 +1,181 @@ +/* + * $Id$ + * + * Generic ADM5120 platform devices + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include + +static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, + unsigned int mctrl); + +#if 1 +/* + * TODO:remove global adm5120_eth* variables when the switch driver will be + * converted into a real platform driver + */ +unsigned int adm5120_eth_num_ports = 6; +EXPORT_SYMBOL_GPL(adm5120_eth_num_ports); + +unsigned char adm5120_eth_macs[6][6] = { + {'\00', 'A', 'D', 'M', '\x51', '\x20' }, + {'\00', 'A', 'D', 'M', '\x51', '\x21' }, + {'\00', 'A', 'D', 'M', '\x51', '\x22' }, + {'\00', 'A', 'D', 'M', '\x51', '\x23' }, + {'\00', 'A', 'D', 'M', '\x51', '\x24' }, + {'\00', 'A', 'D', 'M', '\x51', '\x25' } +}; +EXPORT_SYMBOL_GPL(adm5120_eth_macs); + +unsigned char adm5120_eth_vlans[6] = { + 0x41, 0x42, 0x44, 0x48, 0x50, 0x60 +}; +EXPORT_SYMBOL_GPL(adm5120_eth_vlans); + +#else +/* Built-in ethernet switch */ +struct adm5120_switch_platform_data adm5120_switch_data; +struct platform_device adm5120_switch_device = { + .name = "adm5120-switch", + .id = -1, + .dev.platform_data = &adm5120_switch_data, +}; +#endif + +/* PCI Host Controller */ +struct adm5120_pci_platform_data adm5120_pci_data; +struct platform_device adm5120_pci_device = { + .name = "adm5120-pci", + .id = -1, + .dev.platform_data = &adm5120_pci_data, +}; + +/* USB Host Controller */ +struct resource adm5120_usbc_resources[] = { + [0] = { + .start = ADM5120_USBC_BASE, + .end = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ADM5120_IRQ_USBC, + .end = ADM5120_IRQ_USBC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device adm5120_usbc_device = { + .name = "adm5120-hcd", + .id = -1, + .num_resources = ARRAY_SIZE(adm5120_usbc_resources), + .resource = adm5120_usbc_resources, +}; + +/* NOR flash 0 */ +struct adm5120_flash_platform_data adm5120_flash0_data; +struct platform_device adm5120_flash0_device = { + .name = "adm5120-flash", + .id = 0, + .dev.platform_data = &adm5120_flash0_data, +}; + +/* NOR flash 1 */ +struct adm5120_flash_platform_data adm5120_flash1_data; +struct platform_device adm5120_flash1_device = { + .name = "adm5120-flash", + .id = 1, + .dev.platform_data = &adm5120_flash1_data, +}; + +/* NAND flash */ +struct resource adm5120_nand_resource[] = { + [0] = { + .start = ADM5120_SRAM1_BASE, + .end = ADM5120_SRAM1_BASE+ADM5120_MPMC_SIZE-1, + .flags = IORESOURCE_MEM, + }, +}; + +struct adm5120_nand_platform_data adm5120_nand_data; + +struct platform_device adm5120_nand_device = { + .name = "adm5120-nand", + .id = -1, + .dev.platform_data = &adm5120_nand_data, + .num_resources = ARRAY_SIZE(adm5120_nand_resource), + .resource = adm5120_nand_resource, +}; + +/* built-in UARTs */ +struct amba_pl010_data adm5120_uart0_data = { + .set_mctrl = adm5120_uart_set_mctrl +}; + +struct amba_device adm5120_uart0_device = { + .dev = { + .bus_id = "APB:UART0", + .platform_data = &adm5120_uart0_data, + }, + .res = { + .start = ADM5120_UART0_BASE, + .end = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { ADM5120_IRQ_UART0, -1 }, + .periphid = 0x0041010, +}; + +struct amba_pl010_data adm5120_uart1_data = { + .set_mctrl = adm5120_uart_set_mctrl +}; + +struct amba_device adm5120_uart1_device = { + .dev = { + .bus_id = "APB:UART1", + .platform_data = &adm5120_uart1_data, + }, + .res = { + .start = ADM5120_UART1_BASE, + .end = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + .irq = { ADM5120_IRQ_UART1, -1 }, + .periphid = 0x0041010, +}; + +static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base, + unsigned int mctrl) +{ +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom.c b/target/linux/adm5120/files/arch/mips/adm5120/prom.c new file mode 100644 index 0000000000..2187477d02 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom.c @@ -0,0 +1,276 @@ +/* + * $Id$ + * + * ADM5120 specific prom routines + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include +#include + +unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC; + +struct board_desc { + unsigned long mach_type; + char *name; +}; + +#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)} +static struct board_desc common_boards[] __initdata = { + /* Cellvision/SparkLAN boards */ + DEFBOARD("CAS-630", MACH_ADM5120_CAS630), + DEFBOARD("CAS-670", MACH_ADM5120_CAS670), + DEFBOARD("CAS-771", MACH_ADM5120_CAS771), + DEFBOARD("CAS-790", MACH_ADM5120_CAS790), + DEFBOARD("CAS-861", MACH_ADM5120_CAS861), + /* Compex boards */ + DEFBOARD("WP54G-WRT", MACH_ADM5120_WP54G_WRT), + /* Edimax boards */ + DEFBOARD("BR-6104K", MACH_ADM5120_BR6104K), + DEFBOARD("BR-6104KP", MACH_ADM5120_BR6104K), + /* Infineon boards */ + DEFBOARD("EASY 5120P-ATA", MACH_ADM5120_EASY5120PATA), + DEFBOARD("EASY 5120-RT", MACH_ADM5120_EASY5120RT), + DEFBOARD("EASY 5120-WVoIP", MACH_ADM5120_EASY5120WVOIP), + DEFBOARD("EASY 83000", MACH_ADM5120_EASY83000), + /* Mikrotik RouterBOARDs */ + DEFBOARD("111", MACH_ADM5120_RB_111), + DEFBOARD("112", MACH_ADM5120_RB_112), + DEFBOARD("133", MACH_ADM5120_RB_133), + DEFBOARD("133C", MACH_ADM5120_RB_133C), + DEFBOARD("133C3", MACH_ADM5120_RB_133C), + DEFBOARD("150", MACH_ADM5120_RB_153), /* it's intentional */ + DEFBOARD("153", MACH_ADM5120_RB_153), + DEFBOARD("miniROUTER", MACH_ADM5120_RB_150), +}; + +static unsigned long __init find_machtype_byname(char *name) +{ + unsigned long ret; + int i; + + ret = MACH_ADM5120_GENERIC; + if (name == NULL) + goto out; + + if (*name == '\0') + goto out; + + for (i=0; i 0) strcpy( &(arcs_cmdline[0]), cmd); + else strcpy(&(arcs_cmdline[0]), CONFIG_CMDLINE); + +} + +#define UART_READ(r) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)) +#define UART_WRITE(r,v) *(volatile u32 *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r))=(v) + +void __init prom_putchar(char ch) +{ + while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); + UART_WRITE(UART_REG_DATA, ch); + while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); +} + +void __init prom_init(void) +{ + mips_machgroup = MACH_GROUP_ADM5120; + prom_detect_machtype(); + + prom_init_cmdline(); +} + +void __init prom_free_prom_memory(void) +{ + /* We do not have to prom memory to free */ +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile new file mode 100644 index 0000000000..d844b600f3 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel +# + +lib-y += bootbase.o +lib-y += cfe.o +lib-y += generic.o +lib-y += myloader.o +lib-y += routerboot.o diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c new file mode 100644 index 0000000000..7ab9d46bd6 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c @@ -0,0 +1,124 @@ +/* + * $Id$ + * + * ZyXEL's Bootbase specific prom routines + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include "prom_read.h" + +#define ZYNOS_INFO_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90) +#define ZYNOS_HDBG_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000) +#define BOOTEXT_ADDR_MIN KSEG1ADDR(ADM5120_SRAM0_BASE) +#define BOOTEXT_ADDR_MAX (BOOTEXT_ADDR_MIN + (2*1024*1024)) + +static int bootbase_found = 0; +static struct zynos_board_info *board_info; + +struct bootbase_info bootbase_info; + +static inline int bootbase_dbgarea_present(u8 *data) +{ + u32 t; + + t = prom_read_be32(data+5); + if (t != ZYNOS_MAGIC_DBGAREA1) + return 0; + + t = prom_read_be32(data+9); + if (t != ZYNOS_MAGIC_DBGAREA2) + return 0; + + return 1; +} + +static inline u32 bootbase_get_bootext_addr(void) +{ + return prom_read_be32(&board_info->bootext_addr); +} + +static inline u16 bootbase_get_vendor_id(void) +{ +#define CHECK_VENDOR(n) (strnicmp(board_info->vendor,(n),strlen(n)) == 0) + unsigned char vendor[ZYNOS_NAME_LEN]; + int i; + + for (i=0; ivendor[i]; + + if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL) + return ZYNOS_VENDOR_ID_ZYXEL; + + if CHECK_VENDOR(ZYNOS_VENDOR_DLINK) + return ZYNOS_VENDOR_ID_DLINK; + + if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT) + return ZYNOS_VENDOR_ID_LUCENT; + + if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR) + return ZYNOS_VENDOR_ID_NETGEAR; + + return ZYNOS_VENDOR_ID_OTHER; +} + +static inline u16 bootbase_get_board_id(void) +{ + return prom_read_be16(&board_info->board_id); +} + +int __init bootbase_present(void) +{ + u32 t; + + if (bootbase_found) + goto out; + + /* check presence of the dbgarea */ + if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0) + goto out; + + board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR); + + /* check for a valid BootExt address */ + t = bootbase_get_bootext_addr(); + if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX)) + goto out; + + bootbase_info.vendor_id = bootbase_get_vendor_id(); + bootbase_info.board_id = bootbase_get_board_id(); + + bootbase_found = 1; + +out: + return bootbase_found; +} + diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c new file mode 100644 index 0000000000..6c03a4e859 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c @@ -0,0 +1,86 @@ +/* + * $Id$ + * + * Broadcom's CFE specific prom routines + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include + +#include +#include + +#include +#include "prom_read.h" + +/* + * CFE based boards + */ +#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE +from other bootloaders */ + +static int cfe_found = 0; + +static u32 cfe_handle; +static u32 cfe_entry; +static u32 cfe_seal; + +int __init cfe_present(void) +{ + /* + * This method only works, when we are booted directly from the CFE. + */ + u32 a1 = (u32) fw_arg1; + + if (cfe_found) + return 1; + + cfe_handle = (u32) fw_arg0; + cfe_entry = (u32) fw_arg2; + cfe_seal = (u32) fw_arg3; + + /* Check for CFE by finding the CFE magic number */ + if (cfe_seal != CFE_EPTSEAL) { + /* We are not booted from CFE */ + return 0; + } + + /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */ + if (a1 != 0) { + return 0; + } + + /* The cfe_handle, and the cfe_entry must be kernel mode addresses */ + if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) { + return 0; + } + + cfe_found = 1; + return 1; +} + +char *cfe_getenv(char *envname) +{ + if (cfe_found == 0) + return NULL; + + return NULL; +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c new file mode 100644 index 0000000000..3b5c3bdc09 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c @@ -0,0 +1,60 @@ +/* + * $Id$ + * + * Generic PROM routines + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include + +#include + +#include + +static int *_prom_argc; +static char **_prom_argv; +static char **_prom_envp; + +char *generic_prom_getenv(char *envname) +{ + char **env; + char *ret; + + ret = NULL; + for (env = _prom_envp; *env != NULL; env++) { + if (strcmp(envname, *env++) == 0) { + ret = *env; + break; + } + } + + return ret; +} + +int generic_prom_present(void) +{ + _prom_argc = (int *)fw_arg0; + _prom_argv = (char **)fw_arg1; + _prom_envp = (char **)fw_arg2; + + return 1; +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c new file mode 100644 index 0000000000..8a44509a08 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c @@ -0,0 +1,75 @@ +/* + * $Id$ + * + * Compex's MyLoader specific prom routines + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include "prom_read.h" + +#define SYS_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000) +#define BOARD_PARAMS_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800) +#define PART_TABLE_ADDR KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000) + +static int myloader_found = 0; + +struct myloader_info myloader_info; + +int __init myloader_present(void) +{ + struct mylo_system_params *sysp; + struct mylo_board_params *boardp; + struct mylo_partition_table *parts; + + if (myloader_found) + goto out; + + sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR); + boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR); + parts = (struct mylo_partition_table *)(PART_TABLE_ADDR); + + /* Check for some magic numbers */ + if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) || + (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) || + (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS)) + goto out; + + myloader_info.vid = le32_to_cpu(sysp->vid); + myloader_info.did = le32_to_cpu(sysp->did); + myloader_info.svid = le32_to_cpu(sysp->svid); + myloader_info.sdid = le32_to_cpu(sysp->sdid); + + myloader_found = 1; + +out: + return myloader_found; +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h new file mode 100644 index 0000000000..06e6863fea --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h @@ -0,0 +1,63 @@ +/* + * $Id$ + * + * Generic prom definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_PROM_H_ +#define _ADM5120_PROM_H_ + +/* + * Helper routines + */ +static inline u16 prom_read_le16(void *buf) +{ + u8 *p = buf; + + return ((u16)p[0] + ((u16)p[1] << 8)); +} + +static inline u32 prom_read_le32(void *buf) +{ + u8 *p = buf; + + return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) + + ((u32)p[3] << 24)); +} + +static inline u16 prom_read_be16(void *buf) +{ + u8 *p = buf; + + return (((u16)p[0] << 8) + (u16)p[1]); +} + +static inline u32 prom_read_be32(void *buf) +{ + u8 *p = buf; + + return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) + + ((u32)p[3])); +} + +#endif /* _ADM5120_PROM_H_ */ + + diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c new file mode 100644 index 0000000000..7116f412f5 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c @@ -0,0 +1,142 @@ +/* + * $Id$ + * + * Mikrotik's RouterBOOT specific prom routines + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include "prom_read.h" + +static struct rb_hard_settings rb_hs; +static int rb_found = 0; + +static int __init routerboot_load_hs(u8 *buf, u16 buflen) +{ + u16 id,len; + u8 *mac; + int i,j; + + memset(&rb_hs, 0, sizeof(rb_hs)); + + if (buflen < 4) + return -1; + + if (prom_read_le32(buf) != RB_MAGIC_HARD) + return -1; + + /* skip magic value */ + buf += 4; + buflen -= 4; + + while (buflen > 2) { + id = prom_read_le16(buf); + buf += 2; + buflen -= 2; + if (id == RB_ID_TERMINATOR || buflen < 2) + break; + + len = prom_read_le16(buf); + buf += 2; + buflen -= 2; + + if (buflen < len) + break; + + switch (id) { + case RB_ID_BIOS_VERSION: + rb_hs.bios_ver = (char *)buf; + break; + case RB_ID_BOARD_NAME: + rb_hs.name = (char *)buf; + break; + case RB_ID_MEMORY_SIZE: + rb_hs.mem_size = prom_read_le32(buf); + break; + case RB_ID_MAC_ADDRESS_COUNT: + rb_hs.mac_count = prom_read_le32(buf); + break; + case RB_ID_MAC_ADDRESS_PACK: + rb_hs.mac_count = len/RB_MAC_SIZE; + if (rb_hs.mac_count > RB_MAX_MAC_COUNT) + rb_hs.mac_count = RB_MAX_MAC_COUNT; + mac = buf; + for (i=0; i < rb_hs.mac_count; i++) { + for (j=0; j < RB_MAC_SIZE; j++) + rb_hs.macs[i][j] = mac[j]; + mac += RB_MAC_SIZE; + } + break; + } + + buf += len; + buflen -= len; + + } + + return 0; +} + +#define RB_BS_OFFS 0x14 +#define RB_OFFS_MAX (128*1024) + +int __init routerboot_present(void) +{ + struct rb_bios_settings *bs; + u8 *base; + u32 off,len; + + if (rb_found) + goto out; + + base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE); + bs = (struct rb_bios_settings *)(base + RB_BS_OFFS); + + off = prom_read_le32(&bs->hs_offs); + len = prom_read_le32(&bs->hs_size); + if (off > RB_OFFS_MAX) + goto out; + + if (routerboot_load_hs(base+off, len) != 0) + goto out; + + rb_found = 1; + +out: + return rb_found; +} + +char *routerboot_get_boardname(void) +{ + if (rb_found == 0) + return NULL; + + return rb_hs.name; +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/reset.c b/target/linux/adm5120/files/arch/mips/adm5120/reset.c new file mode 100644 index 0000000000..abcbb1c8b9 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/reset.c @@ -0,0 +1,62 @@ +/* + * $Id$ + * + * ADM5120 specific reset routines + * + * Copyright (C) ADMtek Incorporated. + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include + +#include +#include + +#include +#include +#include + +#define ADM5120_SOFTRESET 0x12000004 + +void (*adm5120_board_reset)(void); + +void adm5120_restart(char *command) +{ + /* TODO: stop switch before reset */ + + if (adm5120_board_reset) + adm5120_board_reset(); + + *(u32*)KSEG1ADDR(ADM5120_SOFTRESET)=1; +} + +void adm5120_halt(void) +{ + printk(KERN_NOTICE "\n** You can safely turn off the power\n"); + while (1); +} + +void adm5120_power_off(void) +{ + adm5120_halt(); +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/setup.c b/target/linux/adm5120/files/arch/mips/adm5120/setup.c new file mode 100644 index 0000000000..ed7966b41a --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/setup.c @@ -0,0 +1,73 @@ +/* + * $Id$ + * + * ADM5120 specific setup + * + * Copyright (C) ADMtek Incorporated. + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +static char *prom_names[ADM5120_PROM_LAST+1] __initdata = { + [ADM5120_PROM_GENERIC] = "Generic", + [ADM5120_PROM_CFE] = "CFE", + [ADM5120_PROM_UBOOT] = "U-Boot", + [ADM5120_PROM_MYLOADER] = "MyLoader", + [ADM5120_PROM_ROUTERBOOT] = "RouterBOOT", + [ADM5120_PROM_BOOTBASE] = "Bootbase" +}; + +static void __init adm5120_report(void) +{ + printk(KERN_INFO "SoC : ADM%04X%s revision %d, running at %ldMHz\n", + adm5120_product_code, + (adm5120_package == ADM5120_PACKAGE_BGA) ? "" : "P", + adm5120_revision, (adm5120_speed / 1000000) + ); + printk(KERN_INFO "Bootdev : %s flash\n", adm5120_nand_boot ? "NAND":"NOR"); + printk(KERN_INFO "Prom : %s\n", prom_names[adm5120_prom_type]); +} + +void __init plat_mem_setup(void) +{ + adm5120_soc_init(); + adm5120_mem_init(); + adm5120_report(); + + board_time_init = adm5120_time_init; + + _machine_restart = adm5120_restart; + _machine_halt = adm5120_halt; + pm_power_off = adm5120_power_off; + + set_io_port_base(KSEG1); +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/time.c b/target/linux/adm5120/files/arch/mips/adm5120/time.c new file mode 100644 index 0000000000..27393d4fe2 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/time.c @@ -0,0 +1,54 @@ +/* + * $Id$ + * + * ADM5120 specific hooks for MIPS CPU Counter/Compare timer + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This file was based on: arch/mips/gt64120/wrppmc/time.c + * Original author: Mark.Zhan + * Copyright (C) 1996, 1997, 2004 by Ralf Baechle + * Copyright (C) 2006, Wind River System Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +void __init adm5120_time_init(void) +{ + mips_hpt_frequency = adm5120_speed / 2; +} + +void __init plat_timer_setup(struct irqaction *irq) +{ + clear_c0_status(ST0_BEV); + + /* Install ISR for CPU Counter interrupt */ + setup_irq(ADM5120_IRQ_COUNTER, irq); +} diff --git a/target/linux/adm5120/files/arch/mips/adm5120/trxsplit.c b/target/linux/adm5120/files/arch/mips/adm5120/trxsplit.c new file mode 100644 index 0000000000..941f306950 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/adm5120/trxsplit.c @@ -0,0 +1,208 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#define PFX "trxsplit: " + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_VERSION 1 +#define TRX_MAX_LEN 0x3A0000 +#define TRX_NO_HEADER 1 /* Do not write TRX header */ +#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ +#define TRX_MAX_OFFSET 3 +#define TRX_MIN_KERNEL_SIZE 256*1024 + +struct trx_header { + u32 magic; /* "HDR0" */ + u32 len; /* Length of file including header */ + u32 crc32; /* 32-bit CRC from flag_version to end of file */ + u32 flag_version; /* 0:15 flags, 16:31 version */ + u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ +}; + +#define BLOCK_LEN_MIN 0x10000 + +static struct mtd_info *trx_mtd = NULL; +static unsigned long trx_offset = 0; +static int trx_nr_parts = 0; +static struct mtd_partition trx_parts[TRX_MAX_OFFSET]; +static struct trx_header trx_hdr; + +static int __init trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset) +{ + size_t retlen; + int err; + + err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen, (void *)&trx_hdr); + if (err) { + printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name); + goto err_out; + } + + if (retlen != sizeof(trx_hdr)) { + printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name); + goto err_out; + } + + trx_hdr.magic = le32_to_cpu(trx_hdr.magic); + trx_hdr.len = le32_to_cpu(trx_hdr.len); + trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32); + trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version); + trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]); + trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]); + trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]); + + /* sanity checks */ + if (trx_hdr.magic != TRX_MAGIC) + goto err_out; + + if (trx_hdr.len > mtd->size - offset) + goto err_out; + + /* TODO: add crc32 checking too? */ + + return 0; + +err_out: + return -1; +} + +static int __init trxsplit_create_partitions(void) +{ + struct mtd_partition *part = trx_parts; + int ret = 0; + int i; + + if (trx_mtd == NULL) + goto out; + + printk(KERN_INFO PFX "creating TRX partitions in '%s' (%d,%d)\n", + trx_mtd->name, MTD_BLOCK_MAJOR, trx_mtd->index); + + for (i=0; ioffset = trx_offset + trx_hdr.offsets[i]; + trx_nr_parts++; + } + + for (i=0; isize - trx_parts[i].offset; + + i=0; + part = &trx_parts[i]; + if (part->size < TRX_MIN_KERNEL_SIZE) { + part->name = "loader"; + i++; + } + + part = &trx_parts[i]; + part->name = "kernel"; + i++; + + part = &trx_parts[i]; + part->name = "rootfs"; + + ret = add_mtd_partitions(trx_mtd, trx_parts, trx_nr_parts); + if (ret) { + printk(KERN_ALERT PFX "creating TRX partitions failed\n"); + } + +out: + return ret; +} + +static void __init trxsplit_add_mtd(struct mtd_info *mtd) +{ + unsigned long offset; + unsigned long blocklen; + int err; + + if (trx_mtd) + return; + + blocklen = mtd->erasesize; + if (blocklen < BLOCK_LEN_MIN) + blocklen = BLOCK_LEN_MIN; + + printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name); + + err = 0; + for (offset=0; offset < mtd->size; offset+=blocklen) { + err = trxsplit_checktrx(mtd, offset); + if (err == 0) + break; + } + + if (err) { + printk(KERN_ALERT PFX "no TRX header found\n"); + return; + } + + printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset); + + trx_mtd = mtd; + trx_offset = offset; +} + +static void __init trxsplit_remove_mtd(struct mtd_info *mtd) +{ + /* nothing to do */ +} + +static struct mtd_notifier trxsplit_notifier __initdata = { + .add = trxsplit_add_mtd, + .remove = trxsplit_remove_mtd, +}; + +static void __init trxsplit_find_trx(void) +{ + register_mtd_user(&trxsplit_notifier); + unregister_mtd_user(&trxsplit_notifier); +} + +static int __init trxsplit_init(void) +{ + int ret; + + trxsplit_find_trx(); + + ret = trxsplit_create_partitions(); + return ret; +} + +late_initcall(trxsplit_init); diff --git a/target/linux/adm5120/files/arch/mips/pci/fixup-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/fixup-adm5120.c new file mode 100644 index 0000000000..59acf75c18 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/pci/fixup-adm5120.c @@ -0,0 +1,175 @@ +/* + * $Id$ + * + * ADM5120 specific PCI fixups + * + * Copyright (C) ADMtek Incorporated. + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include + +struct adm5120_pci_irq { + u8 slot; + u8 func; + u8 pin; + unsigned irq; +}; + +#define PCIIRQ(s,f,p,i) { \ + .slot = (s), \ + .func = (f), \ + .pin = (p), \ + .irq = (i) \ + } + +static struct adm5120_pci_irq default_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), +}; + +static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = { + PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1), + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2) +}; + +static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1), + PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) +}; + +static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = { + PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0), + PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1), + PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2) +}; + +#define GETMAP(n) do { \ + nr_irqs = ARRAY_SIZE(n ## _pci_irqs); \ + p = n ## _pci_irqs; \ + } while (0) + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + struct adm5120_pci_irq *p; + int nr_irqs; + int i; + int irq; + + irq = -1; + if (slot < 1 || slot > 3) { + printk(KERN_ALERT "PCI: slot number %u is not supported\n", + slot); + goto out; + } + + GETMAP(default); + + switch (mips_machtype) { + case MACH_ADM5120_RB_111: + case MACH_ADM5120_RB_112: + case MACH_ADM5120_RB_133: + case MACH_ADM5120_RB_133C: + case MACH_ADM5120_RB_153: + GETMAP(rb1xx); + break; + case MACH_ADM5120_NP28G: + GETMAP(np28g); + break; + case MACH_ADM5120_P335: + case MACH_ADM5120_P334WT: + /* using default mapping */ + break; + case MACH_ADM5120_CAS771: + GETMAP(cas771); + break; + + case MACH_ADM5120_NP27G: + case MACH_ADM5120_NP28GHS: + case MACH_ADM5120_WP54AG: + case MACH_ADM5120_WP54G: + case MACH_ADM5120_WP54G_WRT: + case MACH_ADM5120_WPP54AG: + case MACH_ADM5120_WPP54G: + default: + printk(KERN_ALERT "PCI: irq map is unknown, using defaults.\n"); + break; + } + + for (i=0; islot == slot) && (PCI_FUNC(dev->devfn) == p->func) && + (p->pin == pin)) { + irq = p->irq; + break; + } + } + + if (irq < 0) { + printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n", + pci_name(dev), pin); + } else { + printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n", + pci_name(dev), pin, irq); + } + +out: + return irq; +} + +static void adm5120_pci_fixup(struct pci_dev *dev) +{ + if (dev->devfn != 0) + return; + + /* setup COMMAND register */ + pci_write_config_word(dev, PCI_COMMAND, + (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER)); + + /* setup CACHE_LINE_SIZE register */ + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); + + /* setting up BARS */ + pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0); + pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120, + adm5120_pci_fixup); + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + diff --git a/target/linux/adm5120/files/arch/mips/pci/ops-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/ops-adm5120.c new file mode 100644 index 0000000000..4a9bc999c9 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/pci/ops-adm5120.c @@ -0,0 +1,143 @@ +/* + * $Id$ + * + * ADM5120 specific PCI operations + * + * Copyright (C) ADMtek Incorporated. + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include + +#include + +#define DEBUG 0 +#if DEBUG +#define DBG(f, ...) printk(f, ## __VA_ARGS__ ) +#else +#define DBG(f, ...) +#endif + +#define PCI_ENABLE 0x80000000 + +static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED; + +static inline void write_cfgaddr(u32 addr) +{ + *(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_ADDR) = (addr | PCI_ENABLE); +} + +static inline void write_cfgdata(u32 data) +{ + *(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA) = data; + +} + +static inline u32 read_cfgdata(void) +{ + return (*(volatile u32*)KSEG1ADDR(ADM5120_PCICFG_DATA)); +} + +static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where) +{ + return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \ + (where & 0xFC)); +} + +static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + unsigned long flags; + u32 data; + + spin_lock_irqsave(&pci_lock, flags); + write_cfgaddr(mkaddr(bus,devfn,where)); + data = read_cfgdata(); + + DBG("PCI: cfg_read %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data); + + switch (size) { + case 1: + if (where & 1) + data >>= 8; + if (where & 2) + data >>= 16; + data &= 0xFF; + break; + case 2: + if (where & 2) + data >>= 16; + data &= 0xFFFF; + break; + } + + *val = data; + DBG(", 0x%08X returned\n", data); + spin_unlock_irqrestore(&pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + unsigned long flags; + u32 data; + int s; + + spin_lock_irqsave(&pci_lock, flags); + write_cfgaddr(mkaddr(bus,devfn,where)); + data = read_cfgdata(); + + DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X", + bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, data); + + switch (size) { + case 1: + s = ((where & 3) << 3); + data &= ~(0xFF << s); + data |= ((val & 0xFF) << s); + break; + case 2: + s = ((where & 2) << 4); + data &= ~(0xFFFF << s); + data |= ((val & 0xFFFF) << s); + break; + case 4: + data = val; + break; + } + + write_cfgdata(data); + DBG(", 0x%08X written\n", data); + spin_unlock_irqrestore(&pci_lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops adm5120_pci_ops = { + .read = pci_config_read, + .write = pci_config_write, +}; diff --git a/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c new file mode 100644 index 0000000000..2a64770234 --- /dev/null +++ b/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c @@ -0,0 +1,80 @@ +/* + * $Id$ + * + * ADM5120 PCI Host Controller driver + * + * Copyright (C) ADMtek Incorporated. + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ +#include +#include +#include +#include + +#include +#include +#include + +extern struct pci_ops adm5120_pci_ops; + +static struct resource pci_io_resource = { + .name = "ADM5120 PCI I/O", + .start = ADM5120_PCIIO_BASE, + .end = ADM5120_PCICFG_ADDR-1, + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .name = "ADM5120 PCI MEM", + .start = ADM5120_PCIMEM_BASE, + .end = ADM5120_PCIIO_BASE-1, + .flags = IORESOURCE_MEM +}; + +static struct pci_controller adm5120_controller = { + .pci_ops = &adm5120_pci_ops, + .io_resource = &pci_io_resource, + .mem_resource = &pci_mem_resource, +}; + +static int __init adm5120_pci_setup(void) +{ + int pci_bios; + + pci_bios = adm5120_has_pci(); + + printk("adm5120: system has %sPCI BIOS\n", pci_bios ? "" : "no "); + if (pci_bios == 0) + return -1; + + /* Avoid ISA compat ranges. */ + PCIBIOS_MIN_IO = 0x00000000; + PCIBIOS_MIN_MEM = 0x00000000; + + /* Set I/O resource limits. */ + ioport_resource.end = 0x1fffffff; + iomem_resource.end = 0xffffffff; + + register_pci_controller(&adm5120_controller); + return 0; +} + +arch_initcall(adm5120_pci_setup); diff --git a/target/linux/adm5120/files/drivers/leds/leds-adm5120.c b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c new file mode 100644 index 0000000000..06189371d7 --- /dev/null +++ b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c @@ -0,0 +1,361 @@ +/* + * $Id$ + * + * ADM5120 GPIO LED devices + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + +#include + +#define NUM_LEDS_MAX 23 + +#define ADM5120_GPIO_xxxx 0x100 /* an unknown pin */ + +struct mach_data { + unsigned long machtype; + unsigned count; + struct gpio_led_platform_data *data; +}; + +struct adm5120_leddev { + struct platform_device pdev; + struct gpio_led_platform_data pdata; +}; + +static int led_count = 0; +static struct adm5120_leddev *led_devs[NUM_LEDS_MAX]; + +#define LED_ARRAY(n) \ +static struct gpio_led_platform_data \ +n ## _leds [] __initdata = + +#define LED_DATA(n,t,g,off,on) { \ + .name = (n), \ + .trigger = (t), \ + .gpio = (g), \ + .value_off = (off), \ + .value_on = (on) \ + } + +#define LED_STD(g,n,t) LED_DATA((n),(t),(g), 0, 1) +#define LED_INV(g,n,t) LED_DATA((n),(t),(g), 1, 0) + +/* + * Compex boards + */ +#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) +LED_ARRAY(np27g) { /* FIXME: untested */ + LED_STD(ADM5120_GPIO_xxxx, "lan1", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "lan2", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "lan3", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "lan4", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "wan_cond", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "wlan", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "wan_act", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "usb1", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "usb2", NULL ), + LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "diag", NULL ), +}; +#endif + +#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) +LED_ARRAY(np28g) { /* FIXME: untested */ + LED_STD(ADM5120_GPIO_xxxx, "lan1", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "lan2", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "lan3", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "wan", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "wlan", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "usb1", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "usb2", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "usb3", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "usb4", NULL ), + LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), + LED_STD(ADM5120_GPIO_xxxx, "diag", NULL ), +}; +#endif + +LED_ARRAY(wp54g) { + LED_INV(ADM5120_GPIO_PIN2, "diag", NULL ), + LED_INV(ADM5120_GPIO_PIN6, "wlan", NULL ), + LED_INV(ADM5120_GPIO_PIN7, "wan", NULL ), + LED_INV(ADM5120_GPIO_P0L0, "lan1", NULL ), + LED_INV(ADM5120_GPIO_P1L0, "lan2", NULL ), +}; + +/* + * Edimax boards + */ +LED_ARRAY(br6104k) { + LED_STD(ADM5120_GPIO_PIN0, "power", NULL ), + LED_INV(ADM5120_GPIO_P0L1, "wan_speed", NULL ), + LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact", NULL ), + LED_INV(ADM5120_GPIO_P1L1, "lan1_speed", NULL ), + LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact", NULL ), + LED_INV(ADM5120_GPIO_P2L1, "lan2_speed", NULL ), + LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact", NULL ), + LED_INV(ADM5120_GPIO_P3L1, "lan3_speed", NULL ), + LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact", NULL ), + LED_INV(ADM5120_GPIO_P4L1, "lan4_speed", NULL ), + LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact", NULL ), +}; + +/* + * Mikrotik boards + */ +#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) +LED_ARRAY(rb100) { /* FIXME: untested */ + LED_STD(ADM5120_GPIO_PIN6, "power", NULL ), + LED_STD(ADM5120_GPIO_PIN3, "user", NULL ), +}; +#endif + +LED_ARRAY(rb133) { + LED_STD(ADM5120_GPIO_PIN6, "power", NULL ), + LED_STD(ADM5120_GPIO_PIN5, "user", NULL ), +}; + +/* + * ZyXEL boards + */ +#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) +LED_ARRAY(p334) { /* FIXME: untested */ + LED_INV(ADM5120_GPIO_xxxx, "power", NULL ), + LED_INV(ADM5120_GPIO_xxxx, "lan1", NULL ), + LED_INV(ADM5120_GPIO_xxxx, "lan2", NULL ), + LED_INV(ADM5120_GPIO_xxxx, "lan3", NULL ), + LED_INV(ADM5120_GPIO_xxxx, "lan4", NULL ), + LED_INV(ADM5120_GPIO_xxxx, "wan", NULL ), +}; +#endif + +LED_ARRAY(p334wt) { + LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), + LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL ), + LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL ), + LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL ), + LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL ), + LED_INV(ADM5120_GPIO_P4L0, "wan", NULL ), + LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL ), + LED_INV(ADM5120_GPIO_P2L2, "otist", NULL ), + LED_INV(ADM5120_GPIO_P1L2, "hidden", NULL ), +}; + +#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) +LED_ARRAY(p335) { /* FIXME: untested */ + LED_INV(ADM5120_GPIO_PIN2, "power", NULL ), + LED_INV(ADM5120_GPIO_P3L0, "lan1", NULL ), + LED_INV(ADM5120_GPIO_P2L0, "lan2", NULL ), + LED_INV(ADM5120_GPIO_P1L0, "lan3", NULL ), + LED_INV(ADM5120_GPIO_P0L0, "lan4", NULL ), + LED_INV(ADM5120_GPIO_P4L0, "wan", NULL ), + LED_INV(ADM5120_GPIO_P4L2, "wlan", NULL ), + LED_INV(ADM5120_GPIO_P2L2, "otist", NULL ), + LED_INV(ADM5120_GPIO_xxxx, "usb", NULL ), +}; +#endif + +/* + * Generic board + */ +LED_ARRAY(generic) { +#if defined(CONFIG_LEDS_ADM5120_DIAG) + LED_STD(ADM5120_GPIO_PIN0, "gpio0", NULL ), + LED_STD(ADM5120_GPIO_PIN1, "gpio1", NULL ), + LED_STD(ADM5120_GPIO_PIN2, "gpio2", NULL ), + LED_STD(ADM5120_GPIO_PIN3, "gpio3", NULL ), + LED_STD(ADM5120_GPIO_PIN4, "gpio4", NULL ), + LED_STD(ADM5120_GPIO_PIN5, "gpio5", NULL ), + LED_STD(ADM5120_GPIO_PIN6, "gpio6", NULL ), + LED_STD(ADM5120_GPIO_PIN7, "gpio7", NULL ), + LED_STD(ADM5120_GPIO_P0L0, "port0led0", NULL ), + LED_STD(ADM5120_GPIO_P0L1, "port0led1", NULL ), + LED_STD(ADM5120_GPIO_P0L2, "port0led2", NULL ), + LED_STD(ADM5120_GPIO_P1L0, "port1led0", NULL ), + LED_STD(ADM5120_GPIO_P1L1, "port1led1", NULL ), + LED_STD(ADM5120_GPIO_P1L2, "port1led2", NULL ), + LED_STD(ADM5120_GPIO_P2L0, "port2led0", NULL ), + LED_STD(ADM5120_GPIO_P2L1, "port2led1", NULL ), + LED_STD(ADM5120_GPIO_P2L2, "port2led2", NULL ), + LED_STD(ADM5120_GPIO_P3L0, "port3led0", NULL ), + LED_STD(ADM5120_GPIO_P3L1, "port3led1", NULL ), + LED_STD(ADM5120_GPIO_P3L2, "port3led2", NULL ), + LED_STD(ADM5120_GPIO_P4L0, "port4led0", NULL ), + LED_STD(ADM5120_GPIO_P4L1, "port4led1", NULL ), + LED_STD(ADM5120_GPIO_P4L2, "port4led2", NULL ), +#endif +}; + +#define MACH_DATA(m, n) { \ + .machtype = (m), \ + .count = ARRAY_SIZE(n ## _leds), \ + .data = n ## _leds \ +} + +static struct mach_data machines[] __initdata = { + MACH_DATA(MACH_ADM5120_GENERIC, generic), + /* Compex */ + MACH_DATA(MACH_ADM5120_WP54AG, wp54g), + MACH_DATA(MACH_ADM5120_WP54G, wp54g), + MACH_DATA(MACH_ADM5120_WP54G_WRT, wp54g), + MACH_DATA(MACH_ADM5120_WPP54AG, wp54g), + MACH_DATA(MACH_ADM5120_WPP54G, wp54g), + /* Edimax */ + MACH_DATA(MACH_ADM5120_BR6104K, br6104k), + /* Mikrotik */ + MACH_DATA(MACH_ADM5120_RB_133, rb133), + MACH_DATA(MACH_ADM5120_RB_133C, rb133), + /* ZyXEL */ + MACH_DATA(MACH_ADM5120_P334WT, p334wt), +#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL) + /* untested */ + MACH_DATA(MACH_ADM5120_P334, p334), + MACH_DATA(MACH_ADM5120_P335, p335), + MACH_DATA(MACH_ADM5120_RB_111, rb100), + MACH_DATA(MACH_ADM5120_RB_112, rb100), + MACH_DATA(MACH_ADM5120_NP27G, np27g), + MACH_DATA(MACH_ADM5120_NP28G, np28g), + MACH_DATA(MACH_ADM5120_NP28GHS, np28g), +#endif +}; + +static struct adm5120_leddev * __init +create_leddev(struct gpio_led_platform_data *data) +{ + struct adm5120_leddev *p; + + p = kzalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) + return NULL; + + memcpy(&p->pdata, data, sizeof(p->pdata)); + p->pdev.dev.platform_data = &p->pdata; + + return p; +} + +static void +destroy_leddev(struct adm5120_leddev *led) +{ + if (led) + kfree(led); +} + +static struct mach_data * __init +adm5120_leds_findmach(unsigned long machtype) +{ + struct mach_data *mach; + int i; + + mach = NULL; + for (i=0; icount; i++) { + led_devs[i] = create_leddev(&mach->data[i]); + if (led_devs[i] == NULL) { + ret = -ENOMEM; + goto err_destroy; + } + led_devs[i]->pdev.name = "gpio-led"; + led_devs[i]->pdev.id = i; + } + + for (i=0; i < mach->count; i++) { + ret = platform_device_register(&led_devs[i]->pdev); + if (ret) + goto err_unregister; + } + + led_count = mach->count; + return 0; + +err_unregister: + for (i--; i>=0; i--) + platform_device_unregister(&led_devs[i]->pdev); + +err_destroy: + for (i=0; ipdev); + destroy_leddev(led_devs[i]); + } +} + +module_init(adm5120_leds_init); +module_exit(adm5120_leds_exit); + +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); + diff --git a/target/linux/adm5120/files/drivers/leds/leds-gpio.c b/target/linux/adm5120/files/drivers/leds/leds-gpio.c new file mode 100755 index 0000000000..b1a1f1ce9a --- /dev/null +++ b/target/linux/adm5120/files/drivers/leds/leds-gpio.c @@ -0,0 +1,212 @@ +/* + * $Id$ + * + * Driver for LEDs connected to GPIO lines + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This file was derived from: + * /drivers/led/leds-s3c24xx.c + * (c) 2006 Simtec Electronics, Ben Dooks + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include + +#include + +#include +#include + +#define DRV_NAME "gpio-led" +#define DRV_DESC "GPIO LEDs driver" + +struct gpio_led_device { + struct led_classdev cdev; + struct gpio_led_platform_data *pdata; +}; + +static inline struct gpio_led_device *pdev_to_led(struct platform_device *dev) +{ + return platform_get_drvdata(dev); +} + +static inline struct gpio_led_device *class_to_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct gpio_led_device, cdev); +} + +static void gpio_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct gpio_led_device *led; + struct gpio_led_platform_data *pdata; + + led = class_to_led(led_cdev); + pdata = led->pdata; + + switch (brightness) { + case LED_FULL: + gpio_direction_output(pdata->gpio, pdata->value_on); + break; + case LED_OFF: + gpio_direction_output(pdata->gpio, pdata->value_off); + break; + default: + gpio_direction_output(pdata->gpio, brightness); + break; + } +} + +static int __devinit gpio_led_probe(struct platform_device *dev) +{ + struct gpio_led_platform_data *pdata; + struct gpio_led_device *led; + int ret; + + pdata = dev->dev.platform_data; + if (pdata == NULL) { + dev_err(&dev->dev, "no platform data, id=%d\n", dev->id); + ret = -EINVAL; + goto err; + } + + if (pdata->name == NULL) { + dev_err(&dev->dev, "no led name specified\n"); + ret = -EINVAL; + goto err; + } + + ret = gpio_request(pdata->gpio, pdata->name); + if (ret) { + dev_err(&dev->dev, "gpio_request failed\n"); + goto err; + } + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (led == NULL) { + dev_err(&dev->dev, "no memory for device"); + ret = -ENOMEM; + goto err_free_gpio; + } + + platform_set_drvdata(dev, led); + led->pdata = pdata; + led->cdev.name = pdata->name; + led->cdev.brightness_set = gpio_led_set; +#ifdef CONFIG_LEDS_TRIGGERS + led->cdev.default_trigger = pdata->trigger; +#endif + + ret = led_classdev_register(&dev->dev, &led->cdev); + if (ret < 0) { + dev_err(&dev->dev, "led_classdev_register failed"); + goto err_free_led; + } + + return 0; + +err_free_led: + kfree(led); +err_free_gpio: + gpio_free(pdata->gpio); +err: + return ret; +} + +static int __devexit gpio_led_remove(struct platform_device *dev) +{ + struct gpio_led_device *led; + struct gpio_led_platform_data *pdata; + + pdata = dev->dev.platform_data; + + led = pdev_to_led(dev); + led_classdev_unregister(&led->cdev); + kfree(led); + + gpio_free(pdata->gpio); + + return 0; +} + +#ifdef CONFIG_PM +static int gpio_led_suspend(struct platform_device *dev, + pm_message_t state) +{ + struct gpio_led_device *led; + + led = pdev_to_led(dev); + led_classdev_suspend(&led->cdev); + + return 0; +} + +static int gpio_led_resume(struct platform_device *dev) +{ + struct gpio_led_device *led; + + led = pdev_to_led(dev); + led_classdev_resume(&led->cdev); + + return 0; +} +#endif /* CONFIG_PM */ + +static struct platform_driver gpio_led_driver = { + .probe = gpio_led_probe, + .remove = __devexit_p(gpio_led_remove), +#ifdef CONFIG_PM + .suspend = gpio_led_suspend, + .resume = gpio_led_resume, +#endif + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init gpio_led_init(void) +{ + int ret; + + ret = platform_driver_register(&gpio_led_driver); + if (ret) + printk(KERN_ALERT DRV_DESC " register failed\n"); + else + printk(KERN_INFO DRV_DESC " registered\n"); + + return ret; +} + +static void __exit gpio_led_exit(void) +{ + platform_driver_unregister(&gpio_led_driver); +} + +module_init(gpio_led_init); +module_exit(gpio_led_exit); + +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_LICENSE("GPL"); diff --git a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c new file mode 100644 index 0000000000..0a2590e609 --- /dev/null +++ b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c @@ -0,0 +1,574 @@ +/* + * $Id$ + * + * Platform driver for NOR flash devices on ADM5120 based boards + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This file was derived from: drivers/mtd/map/physmap.c + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#define DRV_NAME "adm5120-flash" +#define DRV_DESC "ADM5120 flash MAP driver" +#define MAX_PARSED_PARTS 8 + +#ifdef ADM5120_FLASH_DEBUG +#define MAP_DBG(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a) +#else +#define MAP_DBG(m, f, a...) do {} while (0) +#endif +#define MAP_ERR(m, f, a...) printk(KERN_ERR "%s: " f, (m->name) , ## a) +#define MAP_INFO(m, f, a...) printk(KERN_INFO "%s: " f, (m->name) , ## a) + +struct adm5120_map_info { + struct map_info map; + void (*switch_bank)(unsigned); + unsigned long window_size; +}; + +struct adm5120_flash_info { + struct mtd_info *mtd; + struct resource *res; + struct platform_device *dev; + struct adm5120_map_info amap; +#ifdef CONFIG_MTD_PARTITIONS + int nr_parts; + struct mtd_partition *parts[MAX_PARSED_PARTS]; +#endif +}; + +struct flash_desc { + u32 phys; + u32 srs_shift; + u32 mpmc_reg; +}; + +/* + * Globals + */ +static DEFINE_SPINLOCK(adm5120_flash_spin); +#define FLASH_LOCK() spin_lock(&adm5120_flash_spin) +#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin) + +static u32 flash_bankwidths[4] = { 1, 2, 4, 0 }; + +static u32 flash_sizes[8] = { + 0, 512*1024, 1024*1024, 2*1024*1024, + 4*1024*1024, 0, 0, 0 +}; + +static struct flash_desc flash_descs[2] = { + { + .phys = ADM5120_SRAM0_BASE, + .mpmc_reg = MPMC_REG_SC1, + .srs_shift = MEMCTRL_SRS0_SHIFT, + }, { + .phys = ADM5120_SRAM1_BASE, + .mpmc_reg = MPMC_REG_SC0, + .srs_shift = MEMCTRL_SRS1_SHIFT, + } +}; + +static const char *probe_types[] = { + "cfi_probe", + "jedec_probe", + "map_rom", + NULL +}; + +#ifdef CONFIG_MTD_PARTITIONS +static const char *parse_types[] = { + "cmdlinepart", +#ifdef CONFIG_MTD_REDBOOT_PARTS + "RedBoot", +#endif +#ifdef CONFIG_MTD_MYLOADER_PARTS + "MyLoader", +#endif +}; +#endif + +#define BANK_SIZE (2<<20) +#define BANK_SIZE_MAX (4<<20) +#define BANK_OFFS_MASK (BANK_SIZE-1) +#define BANK_START_MASK (~BANK_OFFS_MASK) + +static inline struct adm5120_map_info *map_to_amap(struct map_info *map) +{ + return (struct adm5120_map_info *)map; +} + +static void adm5120_flash_switchbank(struct map_info *map, + unsigned long ofs) +{ + struct adm5120_map_info *amap = map_to_amap(map); + unsigned bank; + + if (amap->switch_bank == NULL) + return; + + bank = (ofs & BANK_START_MASK) >> 21; + if (bank > 1) + BUG(); + + MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs); + amap->switch_bank(bank); +} + +static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs) +{ + struct adm5120_map_info *amap = map_to_amap(map); + map_word ret; + + MAP_DBG(map, "reading from ofs %lX\n", ofs); + + if (ofs >= amap->window_size) + return map_word_ff(map); + + FLASH_LOCK(); + adm5120_flash_switchbank(map, ofs); + ret = inline_map_read(map, (ofs & (amap->window_size-1))); + FLASH_UNLOCK(); + + return ret; +} + +static void adm5120_flash_write(struct map_info *map, const map_word datum, + unsigned long ofs) +{ + struct adm5120_map_info *amap = map_to_amap(map); + + MAP_DBG(map,"writing to ofs %lX\n", ofs); + + if (ofs > amap->window_size) + return; + + FLASH_LOCK(); + adm5120_flash_switchbank(map, ofs); + inline_map_write(map, datum, (ofs & (amap->window_size-1))); + FLASH_UNLOCK(); +} + +static void adm5120_flash_copy_from(struct map_info *map, void *to, + unsigned long from, ssize_t len) +{ + struct adm5120_map_info *amap = map_to_amap(map); + char *p; + ssize_t t; + + MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n", + (unsigned long)to, from, (unsigned long)len); + + if (from > amap->window_size) + return; + + p = (char *)to; + while (len > 0) { + t = len; + if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE)) + t = BANK_SIZE-from; + + FLASH_LOCK(); + MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n", + (unsigned long)t, (from & (amap->window_size-1)), + (unsigned long)p); + adm5120_flash_switchbank(map, from); + inline_map_copy_from(map, p, (from & (amap->window_size-1)), t); + FLASH_UNLOCK(); + p += t; + from += t; + len -= t; + } +} + +static int adm5120_flash_initres(struct adm5120_flash_info *info) +{ + struct map_info *map = &info->amap.map; + int err = 0; + + info->res = request_mem_region(map->phys, map->size, map->name); + if (info->res == NULL) { + MAP_ERR(map, "could not reserve memory region\n"); + err = -ENOMEM; + goto out; + } + + map->virt = ioremap_nocache(map->phys, map->size); + if (map->virt == NULL) { + MAP_ERR(map, "failed to ioremap flash region\n"); + err = -ENOMEM; + goto out; + } + +out: + return err; +} + +#define SWITCH_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r)) +#define SWITCH_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+(r))=(v) +#define MPMC_READ(r) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r)) +#define MPMC_WRITE(r,v) *(u32 *)(KSEG1ADDR(ADM5120_MPMC_BASE)+(r))=(v) + +static int adm5120_flash_initinfo(struct adm5120_flash_info *info, + struct platform_device *dev) +{ + struct map_info *map = &info->amap.map; + struct adm5120_flash_platform_data *pdata = dev->dev.platform_data; + struct flash_desc *fdesc; + u32 t; + + map->name = dev->dev.bus_id; + + if (dev->id > 1) { + MAP_ERR(map, "invalid flash id\n"); + goto err_out; + } + + fdesc = &flash_descs[dev->id]; + + /* get memory window size */ + t = SWITCH_READ(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift; + t &= MEMCTRL_SRS_MASK; + info->amap.window_size = flash_sizes[t]; + if (info->amap.window_size == 0) { + MAP_ERR(map, "invalid flash size detected\n"); + goto err_out; + } + + /* get flash bus width */ + t = MPMC_READ(fdesc->mpmc_reg) & SC_MW_MASK; + map->bankwidth = flash_bankwidths[t]; + if (map->bankwidth == 0) { + MAP_ERR(map, "invalid bus width detected\n"); + goto err_out; + } + + map->phys = fdesc->phys; + map->size = BANK_SIZE_MAX; + + simple_map_init(map); + map->read = adm5120_flash_read; + map->write = adm5120_flash_write; + map->copy_from = adm5120_flash_copy_from; + + if (pdata) { + map->set_vpp = pdata->set_vpp; + info->amap.switch_bank = pdata->switch_bank; + } + + info->dev = dev; + + MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n", + (unsigned long)map->phys, + (unsigned long)info->amap.window_size >> 10, + map->bankwidth*8); + + return 0; + +err_out: + return -ENODEV; +} + +static void adm5120_flash_initbanks(struct adm5120_flash_info *info) +{ + struct map_info *map = &info->amap.map; + + if (info->mtd->size <= BANK_SIZE) + /* no bank switching needed */ + return; + + if (info->amap.switch_bank) { + info->amap.window_size = info->mtd->size; + return; + } + + MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n", + (unsigned long)map->size >> 10, + (unsigned long)info->mtd->size >> 10); + + info->mtd->size = info->amap.window_size; +} + +#ifdef CONFIG_MTD_PARTITIONS +static int adm5120_flash_initparts(struct adm5120_flash_info *info) +{ + struct adm5120_flash_platform_data *pdata = info->dev->dev.platform_data; + struct map_info *map = &info->amap.map; + int num_parsers; + const char *parser[2]; + int err = 0; + int nr_parts; + int i; + + info->nr_parts = 0; + + if (pdata == NULL) + goto out; + + if (pdata->nr_parts) { + MAP_INFO(map, "adding static partitions\n"); + err = add_mtd_partitions(info->mtd, pdata->parts, + pdata->nr_parts); + if (err == 0) { + info->nr_parts += pdata->nr_parts; + goto out; + } + } + + num_parsers = ARRAY_SIZE(parse_types); + if (num_parsers > MAX_PARSED_PARTS) + num_parsers = MAX_PARSED_PARTS; + + parser[1] = NULL; + for (i=0; imtd, parser, + &info->parts[i], 0); + + if (nr_parts <= 0) + continue; + + MAP_INFO(map, "adding \"%s\" partitions\n", + parser[0]); + + err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts); + if (err) + break; + + info->nr_parts += nr_parts; + } +out: + return err; +} +#else +static int adm5120_flash_initparts(struct adm5120_flash_info *info) +{ + return 0; +} +#endif /* CONFIG_MTD_PARTITIONS */ + +#ifdef CONFIG_MTD_PARTITIONS +static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info) +{ + int i; + + if (info->nr_parts) { + del_mtd_partitions(info->mtd); + for (i=0; iparts[i] != NULL) + kfree(info->parts[i]); + } else { + del_mtd_device(info->mtd); + } +} +#else +static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info) +{ + del_mtd_device(info->mtd); +} +#endif + +static int adm5120_flash_remove(struct platform_device *dev) +{ + struct adm5120_flash_info *info; + + info = platform_get_drvdata(dev); + if (info == NULL) + return 0; + + platform_set_drvdata(dev, NULL); + + if (info->mtd != NULL) { + adm5120_flash_remove_mtd(info); + map_destroy(info->mtd); + } + + if (info->amap.map.virt != NULL) + iounmap(info->amap.map.virt); + + if (info->res != NULL) { + release_resource(info->res); + kfree(info->res); + } + + return 0; +} + +static int adm5120_flash_probe(struct platform_device *dev) +{ + struct adm5120_flash_info *info; + struct map_info *map; + const char **probe_type; + int err; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (info == NULL) { + err = -ENOMEM; + goto err_out; + } + + platform_set_drvdata(dev, info); + + err = adm5120_flash_initinfo(info, dev); + if (err) + goto err_out; + + err = adm5120_flash_initres(info); + if (err) + goto err_out; + + map = &info->amap.map; + for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL; + probe_type++) + info->mtd = do_map_probe(*probe_type, map); + + if (info->mtd == NULL) { + MAP_ERR(map, "map_probe failed\n"); + err = -ENXIO; + goto err_out; + } + + adm5120_flash_initbanks(info); + + if (info->mtd->size < info->amap.window_size) { + /* readjust resources */ + iounmap(map->virt); + release_resource(info->res); + kfree(info->res); + + info->amap.window_size = info->mtd->size; + map->size = info->mtd->size; + MAP_INFO(map, "reducing map size to %ldKiB\n", + (unsigned long)map->size >> 10); + err = adm5120_flash_initres(info); + if (err) + goto err_out; + } + + MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n", + (unsigned long)map->phys, (unsigned long)info->mtd->size >> 10, + map->bankwidth*8); + + info->mtd->owner = THIS_MODULE; + + err = adm5120_flash_initparts(info); + if (err) + goto err_out; + + if (info->nr_parts == 0) { + MAP_INFO(map, "no partitions available, registering whole flash\n"); + add_mtd_device(info->mtd); + } + + return 0; + +err_out: + adm5120_flash_remove(dev); + return err; +} + +#ifdef CONFIG_PM +static int adm5120_flash_suspend(struct platform_device *dev, pm_message_t state) +{ + struct adm5120_flash_info *info = platform_get_drvdata(dev); + int ret = 0; + + if (info) + ret = info->mtd->suspend(info->mtd); + + return ret; +} + +static int adm5120_flash_resume(struct platform_device *dev) +{ + struct adm5120_flash_info *info = platform_get_drvdata(dev); + + if (info) + info->mtd->resume(info->mtd); + + return 0; +} + +static void adm5120_flash_shutdown(struct platform_device *dev) +{ + struct adm5120_flash_info *info = platform_get_drvdata(dev); + + if (info && info->mtd->suspend(info->mtd) == 0) + info->mtd->resume(info->mtd); +} +#endif + +static struct platform_driver adm5120_flash_driver = { + .probe = adm5120_flash_probe, + .remove = adm5120_flash_remove, +#ifdef CONFIG_PM + .suspend = adm5120_flash_suspend, + .resume = adm5120_flash_resume, + .shutdown = adm5120_flash_shutdown, +#endif + .driver = { + .name = DRV_NAME, + }, +}; + +static int __init adm5120_flash_init(void) +{ + int err; + + err = platform_driver_register(&adm5120_flash_driver); + + return err; +} + +static void __exit adm5120_flash_exit(void) +{ + platform_driver_unregister(&adm5120_flash_driver); +} + +module_init(adm5120_flash_init); +module_exit(adm5120_flash_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION(DRV_DESC); diff --git a/target/linux/adm5120/files/drivers/mtd/myloader.c b/target/linux/adm5120/files/drivers/mtd/myloader.c new file mode 100644 index 0000000000..ad207e5559 --- /dev/null +++ b/target/linux/adm5120/files/drivers/mtd/myloader.c @@ -0,0 +1,178 @@ +/* + * $Id$ + * + * Parse MyLoader-style flash partition tables and produce a Linux partition + * array to match. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This file was based on drivers/mtd/redboot.c + * Author: Red Hat, Inc. - David Woodhouse + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#include +#include +#include +#include + +#include +#include + +#include + +#include + +#define NAME_LEN_MAX 20 +#define NAME_MYLOADER "MyLoader" +#define NAME_PARTITION_TABLE "Partition Table" +#define BLOCK_LEN_MIN 0x10000 + +int parse_myloader_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + unsigned long origin) +{ + struct mylo_partition_table *tab; + struct mylo_partition *part; + struct mtd_partition *mtd_parts; + struct mtd_partition *mtd_part; + int num_parts; + int ret, i; + size_t retlen; + size_t parts_len; + char *names; + unsigned long offset; + unsigned long blocklen; + + tab = vmalloc(sizeof(*tab)); + if (!tab) { + return -ENOMEM; + goto out; + } + + blocklen = master->erasesize; + if (blocklen < BLOCK_LEN_MIN) + blocklen = BLOCK_LEN_MIN; + + /* Partition Table is always located on the second erase block */ + offset = blocklen; + printk(KERN_NOTICE "%s: searching for MyLoader partition table at " + "offset 0x%lx\n", master->name, offset); + + ret = master->read(master, offset, sizeof(*tab), &retlen, (void *)tab); + if (ret) + goto out; + + if (retlen != sizeof(*tab)) { + ret = -EIO; + goto out_free_buf; + } + + /* Check for Partition Table magic number */ + if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) { + printk(KERN_NOTICE "%s: no MyLoader partition table found\n", + master->name); + ret = 0; + goto out_free_buf; + } + + /* The MyLoader and the Partition Table is always present */ + num_parts = 2; + + /* Detect number of used partitions */ + for (i = 0; i < MYLO_MAX_PARTITIONS; i++) { + part = &tab->partitions[i]; + + if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE) + continue; + + num_parts++; + } + + mtd_parts = kzalloc((num_parts*sizeof(*mtd_part) + num_parts*NAME_LEN_MAX), + GFP_KERNEL); + + if (!mtd_parts) { + ret = -ENOMEM; + goto out_free_buf; + } + + mtd_part = mtd_parts; + names = (char *)&mtd_parts[num_parts]; + + strncpy(names, NAME_MYLOADER, NAME_LEN_MAX-1); + mtd_part->name = names; + mtd_part->offset = 0; + mtd_part->size = blocklen; + mtd_part->mask_flags = MTD_WRITEABLE; + mtd_part++; + names += NAME_LEN_MAX; + + strncpy(names, NAME_PARTITION_TABLE, NAME_LEN_MAX-1); + mtd_part->name = names; + mtd_part->offset = blocklen; + mtd_part->size = blocklen; + mtd_part->mask_flags = MTD_WRITEABLE; + mtd_part++; + names += NAME_LEN_MAX; + + for (i = 0; i < MYLO_MAX_PARTITIONS; i++) { + part = &tab->partitions[i]; + + if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE) + continue; + + sprintf(names, "partition%d", i); + mtd_part->offset = le32_to_cpu(part->addr); + mtd_part->size = le32_to_cpu(part->size); + mtd_part->name = names; + mtd_part++; + names += NAME_LEN_MAX; + } + + *pparts = mtd_parts; + ret = num_parts; + +out_free_buf: + vfree(tab); +out: + return ret; +} + +static struct mtd_part_parser mylo_mtd_parser = { + .owner = THIS_MODULE, + .parse_fn = parse_myloader_partitions, + .name = NAME_MYLOADER, +}; + +static int __init mylo_mtd_parser_init(void) +{ + return register_mtd_parser(&mylo_mtd_parser); +} + +static void __exit mylo_mtd_parser_exit(void) +{ + deregister_mtd_parser(&mylo_mtd_parser); +} + +module_init(mylo_mtd_parser_init); +module_exit(mylo_mtd_parser_exit); + +MODULE_AUTHOR("Gabor Juhos "); +MODULE_DESCRIPTION("Parsing code for MyLoader partition tables"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/adm5120/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/adm5120/files/drivers/mtd/nand/rbmipsnand.c new file mode 100644 index 0000000000..2e7059d186 --- /dev/null +++ b/target/linux/adm5120/files/drivers/mtd/nand/rbmipsnand.c @@ -0,0 +1,207 @@ +/*==============================================================================*/ +/* rbmipsnand.c */ +/* This module is derived from the 2.4 driver shipped by Microtik for their */ +/* Routerboard 1xx and 5xx series boards. It provides support for the built in */ +/* NAND flash on the Routerboard 1xx series boards for Linux 2.6.19+. */ +/* Licence: Original Microtik code seems not to have a licence. */ +/* Rewritten code all GPL V2. */ +/* Copyright(C) 2007 david.goodenough@linkchoose.co.uk (for rewriten code) */ +/*==============================================================================*/ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define SMEM1(x) (*((volatile unsigned char *) (KSEG1ADDR(ADM5120_SRAM1_BASE) + x))) + +#define NAND_RW_REG 0x0 //data register +#define NAND_SET_CEn 0x1 //CE# low +#define NAND_CLR_CEn 0x2 //CE# high +#define NAND_CLR_CLE 0x3 //CLE low +#define NAND_SET_CLE 0x4 //CLE high +#define NAND_CLR_ALE 0x5 //ALE low +#define NAND_SET_ALE 0x6 //ALE high +#define NAND_SET_SPn 0x7 //SP# low (use spare area) +#define NAND_CLR_SPn 0x8 //SP# high (do not use spare area) +#define NAND_SET_WPn 0x9 //WP# low +#define NAND_CLR_WPn 0xA //WP# high +#define NAND_STS_REG 0xB //Status register + +#define MEM32(x) *((volatile unsigned *) (x)) + +static struct mtd_partition partition_info[] = { + { + name: "RouterBoard NAND Boot", + offset: 0, + size: 4 * 1024 * 1024 + }, + { + name: "rootfs", + offset: MTDPART_OFS_NXTBLK, + size: MTDPART_SIZ_FULL + } +}; + +static struct nand_ecclayout rb_ecclayout = { + .eccbytes = 6, + .eccpos = { 8, 9, 10, 13, 14, 15 }, + .oobavail = 9, + .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1} } +}; + +struct adm5120_nand_info { + struct nand_chip chip; + struct mtd_info mtd; + void __iomem *io_base; +#ifdef CONFIG_MTD_PARTITIONS + int nr_parts; + struct mtd_partition *parts; +#endif + unsigned int init_ok; +}; + +static int rb100_dev_ready(struct mtd_info *mtd) +{ + return SMEM1(NAND_STS_REG) & 0x80; +} + +static void rbmips_hwcontrol100(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + if (ctrl & NAND_CTRL_CHANGE) + { + SMEM1((( ctrl & NAND_CLE) ? NAND_SET_CLE : NAND_CLR_CLE)) = 0x01; + SMEM1((( ctrl & NAND_ALE) ? NAND_SET_ALE : NAND_CLR_ALE)) = 0x01; + SMEM1((( ctrl & NAND_NCE) ? NAND_SET_CEn : NAND_CLR_CEn)) = 0x01; + } + if (cmd != NAND_CMD_NONE) + writeb( cmd, chip->IO_ADDR_W); +} + +/*========================================================================*/ +/* We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader */ +/* will not be able to find the kernel that we load. So set the oobinfo */ +/* when creating the partitions. */ +/*========================================================================*/ + + +unsigned get_rbnand_block_size(struct adm5120_nand_info *data) +{ + return data->init_ok ? data->mtd.writesize : 0; +} + +EXPORT_SYMBOL(get_rbnand_block_size); + +static int rbmips_probe(struct platform_device *pdev) +{ + struct adm5120_nand_info *data; + int res = 0; + + /* Allocate memory for the nand_chip structure */ + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "Failed to allocate device structure\n"); + return -ENOMEM; + + } + + data->io_base = ioremap(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); + + if (data->io_base == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + kfree(data); + return -EIO; + } + + MEM32(0xB2000064) = 0x100; + MEM32(0xB2000008) = 0x1; + SMEM1(NAND_SET_SPn) = 0x01; + SMEM1(NAND_CLR_WPn) = 0x01; + + data->chip.priv = &data; + data->mtd.priv = &data->chip; + data->mtd.owner = THIS_MODULE; + + data->init_ok = 0; + data->chip.IO_ADDR_R = (unsigned char *)KSEG1ADDR(ADM5120_SRAM1_BASE); + data->chip.IO_ADDR_W = data->chip.IO_ADDR_R; + data->chip.cmd_ctrl = rbmips_hwcontrol100; + data->chip.dev_ready = rb100_dev_ready; + data->chip.ecc.mode = NAND_ECC_SOFT; + data->chip.ecc.layout = &rb_ecclayout; + data->chip.chip_delay = 25; + data->chip.options |= NAND_NO_AUTOINCR; + + platform_set_drvdata(pdev, data); + + /* Why do we need to scan 4 times ? */ + if (nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1)) { + printk(KERN_INFO "RB1xxx nand device not found\n"); + res = -ENXIO; + goto out; + } + + add_mtd_partitions(&data->mtd, partition_info, 2); + data->init_ok = 1; + + res = add_mtd_device(&data->mtd); + if (!res) + return res; + + nand_release(&data->mtd); +out: + platform_set_drvdata(pdev, NULL); + iounmap(data->io_base); + kfree(data); + return res; +} + +static int __devexit rbmips_remove(struct platform_device *pdev) +{ + struct adm5120_nand_info *data = platform_get_drvdata(pdev); + + nand_release(&data->mtd); + iounmap(data->io_base); + kfree(data); + + return 0; +} + +static struct platform_driver adm5120_nand_driver = { + .probe = rbmips_probe, + .remove = rbmips_remove, + .driver = { + .name = "adm5120-nand", + .owner = THIS_MODULE, + }, +}; + +static int __init adm5120_nand_init(void) +{ + int err; + err = platform_driver_register(&adm5120_nand_driver); + return err; +} + +static void __exit adm5120_nand_exit(void) +{ + platform_driver_unregister(&adm5120_nand_driver); +} + +module_init(adm5120_nand_init); +module_exit(adm5120_nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Goodenough, Florian Fainelli"); +MODULE_DESCRIPTION("RouterBOARD 100 NAND driver"); + diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c new file mode 100644 index 0000000000..80c81abf74 --- /dev/null +++ b/target/linux/adm5120/files/drivers/net/adm5120sw.c @@ -0,0 +1,625 @@ +/* + * ADM5120 built in ethernet switch driver + * + * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 + * + * Inspiration for this driver came from the original ADMtek 2.4 + * driver, Copyright ADMtek Inc. + * + * NAPI extensions by Thomas Langer (Thomas.Langer@infineon.com) + * and Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007 + * + * TODO: Add support of high prio queues (currently disabled) + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "adm5120sw.h" + +#include +#include + +MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)"); +MODULE_DESCRIPTION("ADM5120 ethernet switch driver"); +MODULE_LICENSE("GPL"); + +/* default settings - unlimited TX and RX on all ports, default shaper mode */ +static unsigned char bw_matrix[SW_DEVS] = { + 0, 0, 0, 0, 0, 0 +}; + +static int adm5120_nrdevs; + +static struct net_device *adm5120_devs[SW_DEVS]; +/* Lookup table port -> device */ +static struct net_device *adm5120_port[SW_DEVS]; + +static struct adm5120_dma + adm5120_dma_txh_v[ADM5120_DMA_TXH] __attribute__((aligned(16))), + adm5120_dma_txl_v[ADM5120_DMA_TXL] __attribute__((aligned(16))), + adm5120_dma_rxh_v[ADM5120_DMA_RXH] __attribute__((aligned(16))), + adm5120_dma_rxl_v[ADM5120_DMA_RXL] __attribute__((aligned(16))), + *adm5120_dma_txh, + *adm5120_dma_txl, + *adm5120_dma_rxh, + *adm5120_dma_rxl; +static struct sk_buff + *adm5120_skb_rxh[ADM5120_DMA_RXH], + *adm5120_skb_rxl[ADM5120_DMA_RXL], + *adm5120_skb_txh[ADM5120_DMA_TXH], + *adm5120_skb_txl[ADM5120_DMA_TXL]; +static int adm5120_rxli = 0; +static int adm5120_txli = 0; +/*static int adm5120_txhi = 0;*/ +static int adm5120_if_open = 0; + +static inline void adm5120_set_reg(unsigned int reg, unsigned long val) +{ + *(volatile unsigned long*)(SW_BASE+reg) = val; +} + +static inline unsigned long adm5120_get_reg(unsigned int reg) +{ + return *(volatile unsigned long*)(SW_BASE+reg); +} + +static inline void adm5120_rx_dma_update(struct adm5120_dma *dma, + struct sk_buff *skb, int end) +{ + dma->status = 0; + dma->cntl = 0; + dma->len = ADM5120_DMA_RXSIZE; + dma->data = ADM5120_DMA_ADDR(skb->data) | + ADM5120_DMA_OWN | (end ? ADM5120_DMA_RINGEND : 0); +} + +static int adm5120_rx(struct net_device *dev,int *budget) +{ + struct sk_buff *skb, *skbn; + struct adm5120_sw *priv; + struct net_device *cdev; + struct adm5120_dma *dma; + int port, len, quota; + + quota = min(dev->quota, *budget); + dma = &adm5120_dma_rxl[adm5120_rxli]; + while (!(dma->data & ADM5120_DMA_OWN) && quota) { + port = (dma->status & ADM5120_DMA_PORTID); + port >>= ADM5120_DMA_PORTSHIFT; + cdev = adm5120_port[port]; + if (cdev != dev) { /* The current packet belongs to a different device */ + if ((cdev==NULL) || !netif_running(cdev)) { + /* discard (update with old skb) */ + skb = skbn = NULL; + goto rx_skip; + } + else { + netif_rx_schedule(cdev);/* Start polling next device */ + return 1; /* return 1 -> More packets to process */ + } + + } + skb = adm5120_skb_rxl[adm5120_rxli]; + len = (dma->status & ADM5120_DMA_LEN); + len >>= ADM5120_DMA_LENSHIFT; + len -= ETH_FCS; + + priv = netdev_priv(dev); + if (len <= 0 || len > ADM5120_DMA_RXSIZE || + dma->status & ADM5120_DMA_FCSERR) { + priv->stats.rx_errors++; + skbn = NULL; + } else { + skbn = dev_alloc_skb(ADM5120_DMA_RXSIZE+16); + if (skbn) { + skb_put(skb, len); + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + dev->last_rx = jiffies; + priv->stats.rx_packets++; + priv->stats.rx_bytes += len; + skb_reserve(skbn, NET_IP_ALIGN); + adm5120_skb_rxl[adm5120_rxli] = skbn; + } else { + printk(KERN_INFO "%s recycling!\n", dev->name); + } + } +rx_skip: + adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli], + adm5120_skb_rxl[adm5120_rxli], + (ADM5120_DMA_RXL-1==adm5120_rxli)); + if (ADM5120_DMA_RXL == ++adm5120_rxli) + adm5120_rxli = 0; + dma = &adm5120_dma_rxl[adm5120_rxli]; + if (skbn){ + netif_receive_skb(skb); + dev->quota--; + (*budget)--; + quota--; + } + } /* while */ + /* If there are still packets to process, return 1 */ + if (quota){ + /* No more packets to process, so disable the polling and reenable the interrupts */ + netif_rx_complete(dev); + adm5120_set_reg(ADM5120_INT_MASK, + adm5120_get_reg(ADM5120_INT_MASK) & + ~(ADM5120_INT_RXL|ADM5120_INT_LFULL)); + return 0; + + + } + return 1; +} + +static irqreturn_t adm5120_sw_irq(int irq, void *dev_id) +{ + unsigned long intreg, intmask; + int port; + struct net_device *dev; + + intmask = adm5120_get_reg(ADM5120_INT_MASK); /* Remember interrupt mask */ + adm5120_set_reg(ADM5120_INT_MASK, ADM5120_INTMASKALL); /* Disable interrupts */ + + intreg = adm5120_get_reg(ADM5120_INT_ST); /* Read interrupt status */ + adm5120_set_reg(ADM5120_INT_ST, intreg); /* Clear interrupt status */ + + /* In NAPI operation the interrupts are disabled and the polling mechanism + * is activated. The interrupts are finally enabled again in the polling routine. + */ + if (intreg & (ADM5120_INT_RXL|ADM5120_INT_LFULL)) { + /* check rx buffer for port number */ + port = adm5120_dma_rxl[adm5120_rxli].status & ADM5120_DMA_PORTID; + port >>= ADM5120_DMA_PORTSHIFT; + dev = adm5120_port[port]; + if ((dev==NULL) || !netif_running(dev)) { + /* discard (update with old skb) */ + adm5120_rx_dma_update(&adm5120_dma_rxl[adm5120_rxli], + adm5120_skb_rxl[adm5120_rxli], + (ADM5120_DMA_RXL-1==adm5120_rxli)); + if (ADM5120_DMA_RXL == ++adm5120_rxli) + adm5120_rxli = 0; + } + else { + netif_rx_schedule(dev); + intmask |= (ADM5120_INT_RXL|ADM5120_INT_LFULL); /* Disable RX interrupts */ + } + } +#ifdef CONFIG_DEBUG + if (intreg & ~(intmask)) + printk(KERN_INFO "adm5120sw: IRQ 0x%08X unexpected!\n", (unsigned int)(intreg & ~(intmask))); +#endif + + adm5120_set_reg(ADM5120_INT_MASK, intmask); + + return IRQ_HANDLED; +} + +static void adm5120_set_vlan(char *matrix) +{ + unsigned long val; + int vlan_port, port; + + val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24); + adm5120_set_reg(ADM5120_VLAN_GI, val); + val = matrix[4] + (matrix[5]<<8); + adm5120_set_reg(ADM5120_VLAN_GII, val); + /* Now set/update the port vs. device lookup table */ + for (port=0; porttrans_start = jiffies; + dma = &adm5120_dma_txl[adm5120_txli]; + if (dma->data & ADM5120_DMA_OWN) { + /* We want to write a packet but the TX queue is still + * occupied by the DMA. We are faster than the DMA... */ + dev_kfree_skb(skb); + priv->stats.tx_dropped++; + return 0; + } + data = ADM5120_DMA_ADDR(skb->data) | ADM5120_DMA_OWN; + if (adm5120_txli == ADM5120_DMA_TXL-1) + data |= ADM5120_DMA_RINGEND; + dma->status = + ((skb->lenlen) << ADM5120_DMA_LENSHIFT) | + (0x1 << priv->port); + + dma->len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + priv->stats.tx_packets++; + priv->stats.tx_bytes += skb->len; + + /* free old skbs here instead of tx completion interrupt: + * will hold some more memory allocated but reduces interrupts */ + if (skbl[adm5120_txli]){ + dev_kfree_skb(skbl[adm5120_txli]); + } + skbl[adm5120_txli] = skb; + + dma->data = data; /* Here we enable the buffer for the TX DMA machine */ + adm5120_set_reg(ADM5120_SEND_TRIG, ADM5120_SEND_TRIG_L); + if (++adm5120_txli == ADM5120_DMA_TXL) + adm5120_txli = 0; + return 0; +} + +static void adm5120_tx_timeout(struct net_device *dev) +{ + printk(KERN_INFO "%s: TX timeout\n",dev->name); +} + +static struct net_device_stats *adm5120_sw_stats(struct net_device *dev) +{ + struct adm5120_sw *priv = netdev_priv(dev); + int portmask; + unsigned long adm5120_cpup_conf_reg; + + portmask = adm5120_eth_vlans[priv->port] & 0x3f; + + adm5120_cpup_conf_reg = adm5120_get_reg(ADM5120_CPUP_CONF); + + if (dev->flags & IFF_PROMISC) + adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL); + else + adm5120_cpup_conf_reg |= (portmask << ADM5120_DISUNSHIFT); + + if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || dev->mc_count) + adm5120_cpup_conf_reg &= ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL); + else + adm5120_cpup_conf_reg |= (portmask << ADM5120_DISMCSHIFT); + + /* If there is any port configured to be in promiscuous mode, then the */ + /* Bridge Test Mode has to be activated. This will result in */ + /* transporting also packets learned in another VLAN to be forwarded */ + /* to the CPU. */ + /* The difficult scenario is when we want to build a bridge on the CPU.*/ + /* Assume we have port0 and the CPU port in VLAN0 and port1 and the */ + /* CPU port in VLAN1. Now we build a bridge on the CPU between */ + /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode. */ + /* Now assume a packet with ethernet source address 99 enters port 0 */ + /* It will be forwarded to the CPU because it is unknown. Then the */ + /* bridge in the CPU will send it to VLAN1 and it goes out at port 1. */ + /* When now a packet with ethernet destination address 99 comes in at */ + /* port 1 in VLAN1, then the switch has learned that this address is */ + /* located at port 0 in VLAN0. Therefore the switch will drop */ + /* this packet. In order to avoid this and to send the packet still */ + /* to the CPU, the Bridge Test Mode has to be activated. */ + + /* Check if there is any vlan in promisc mode. */ + if (~adm5120_cpup_conf_reg & ADM5120_DISUNALL) + adm5120_cpup_conf_reg |= ADM5120_BTM; /* Set the BTM */ + else + adm5120_cpup_conf_reg &= ~ADM5120_BTM; /* Disable the BTM */ + + adm5120_set_reg(ADM5120_CPUP_CONF,adm5120_cpup_conf_reg); + + return &((struct adm5120_sw *)netdev_priv(dev))->stats; +} + +static void adm5120_set_multicast_list(struct net_device *dev) +{ + struct adm5120_sw *priv = netdev_priv(dev); + int portmask; + + portmask = adm5120_eth_vlans[priv->port] & 0x3f; + + if (dev->flags & IFF_PROMISC) + adm5120_set_reg(ADM5120_CPUP_CONF, + adm5120_get_reg(ADM5120_CPUP_CONF) & + ~((portmask << ADM5120_DISUNSHIFT) & ADM5120_DISUNALL)); + else + adm5120_set_reg(ADM5120_CPUP_CONF, + adm5120_get_reg(ADM5120_CPUP_CONF) | + (portmask << ADM5120_DISUNSHIFT)); + + if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI || + dev->mc_count) + adm5120_set_reg(ADM5120_CPUP_CONF, + adm5120_get_reg(ADM5120_CPUP_CONF) & + ~((portmask << ADM5120_DISMCSHIFT) & ADM5120_DISMCALL)); + else + adm5120_set_reg(ADM5120_CPUP_CONF, + adm5120_get_reg(ADM5120_CPUP_CONF) | + (portmask << ADM5120_DISMCSHIFT)); +} + +static void adm5120_write_mac(struct net_device *dev) +{ + struct adm5120_sw *priv = netdev_priv(dev); + unsigned char *mac = dev->dev_addr; + + adm5120_set_reg(ADM5120_MAC_WT1, + mac[2] | (mac[3]<<8) | (mac[4]<<16) | (mac[5]<<24)); + adm5120_set_reg(ADM5120_MAC_WT0, (priv->port<<3) | + (mac[0]<<16) | (mac[1]<<24) | ADM5120_MAC_WRITE | ADM5120_VLAN_EN); + + while (!(adm5120_get_reg(ADM5120_MAC_WT0) & ADM5120_MAC_WRITE_DONE)); +} + +static int adm5120_sw_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + adm5120_write_mac(dev); + return 0; +} + +static int adm5120_do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + int err; + struct adm5120_sw_info info; + struct adm5120_sw *priv = netdev_priv(dev); + + switch(cmd) { + case SIOCGADMINFO: + info.magic = 0x5120; + info.ports = adm5120_nrdevs; + info.vlan = priv->port; + err = copy_to_user(rq->ifr_data, &info, sizeof(info)); + if (err) + return -EFAULT; + break; + case SIOCSMATRIX: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + err = copy_from_user(adm5120_eth_vlans, rq->ifr_data, + sizeof(adm5120_eth_vlans)); + if (err) + return -EFAULT; + adm5120_set_vlan(adm5120_eth_vlans); + break; + case SIOCGMATRIX: + err = copy_to_user(rq->ifr_data, adm5120_eth_vlans, + sizeof(adm5120_eth_vlans)); + if (err) + return -EFAULT; + break; + case SIOCGETBW: + err = copy_to_user(rq->ifr_data, bw_matrix, sizeof(bw_matrix)); + if (err) + return -EFAULT; + break; + case SIOCSETBW: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + err = copy_from_user(bw_matrix, rq->ifr_data, sizeof(bw_matrix)); + if (err) + return -EFAULT; + adm5120_set_bw(bw_matrix); + break; + default: + return -EOPNOTSUPP; + } + return 0; +} + +static void adm5120_dma_tx_init(struct adm5120_dma *dma, struct sk_buff **skbl, + int num) +{ + memset(dma, 0, sizeof(struct adm5120_dma)*num); + dma[num-1].data |= ADM5120_DMA_RINGEND; + memset(skbl, 0, sizeof(struct skb*)*num); +} + +static void adm5120_dma_rx_init(struct adm5120_dma *dma, struct sk_buff **skbl, + int num) +{ + int i; + + memset(dma, 0, sizeof(struct adm5120_dma)*num); + for (i=0; iport = i; + dev->base_addr = SW_BASE; + dev->irq = ADM5120_IRQ_SWITCH; + dev->open = adm5120_sw_open; + dev->hard_start_xmit = adm5120_sw_tx; + dev->stop = adm5120_sw_stop; + dev->get_stats = adm5120_sw_stats; + dev->set_multicast_list = adm5120_set_multicast_list; + dev->do_ioctl = adm5120_do_ioctl; + dev->tx_timeout = adm5120_tx_timeout; + dev->watchdog_timeo = ETH_TX_TIMEOUT; + dev->set_mac_address = adm5120_sw_set_mac_address; + dev->poll = adm5120_rx; + dev->weight = 64; + + memcpy(dev->dev_addr, adm5120_eth_macs[i], 6); + adm5120_write_mac(dev); + + if ((err = register_netdev(dev))) { + free_netdev(dev); + goto out_int; + } + printk(KERN_INFO "%s: ADM5120 switch port%d\n", dev->name, i); + } + /* setup vlan/port mapping after devs are filled up */ + adm5120_set_vlan(adm5120_eth_vlans); + + adm5120_set_reg(ADM5120_CPUP_CONF, + ADM5120_CRC_PADDING | ADM5120_DISUNALL | ADM5120_DISMCALL); + + return 0; + +out_int: + /* Undo everything that did succeed */ + for (; i; i--) { + unregister_netdev(adm5120_devs[i-1]); + free_netdev(adm5120_devs[i-1]); + } + free_irq(ADM5120_IRQ_SWITCH, NULL); +out: + printk(KERN_ERR "ADM5120 Ethernet switch init failed\n"); + return err; +} + +static void __exit adm5120_sw_exit(void) +{ + int i; + + for (i = 0; i < SW_DEVS; i++) { + unregister_netdev(adm5120_devs[i]); + free_netdev(adm5120_devs[i]); + } + + free_irq(ADM5120_IRQ_SWITCH, NULL); + + for (i = 0; i < ADM5120_DMA_RXH; i++) { + if (!adm5120_skb_rxh[i]) + break; + kfree_skb(adm5120_skb_rxh[i]); + } + for (i = 0; i < ADM5120_DMA_RXL; i++) { + if (!adm5120_skb_rxl[i]) + break; + kfree_skb(adm5120_skb_rxl[i]); + } +} + +module_init(adm5120_sw_init); +module_exit(adm5120_sw_exit); diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.h b/target/linux/adm5120/files/drivers/net/adm5120sw.h new file mode 100644 index 0000000000..a3b4ec0179 --- /dev/null +++ b/target/linux/adm5120/files/drivers/net/adm5120sw.h @@ -0,0 +1,114 @@ +/* + * Defines for ADM5120 built in ethernet switch driver + * + * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 + * + * Values come from ADM5120 datasheet and original ADMtek 2.4 driver, + * Copyright ADMtek Inc. + */ + +#ifndef _INCLUDE_ADM5120SW_H_ +#define _INCLUDE_ADM5120SW_H_ + +#define SW_BASE KSEG1ADDR(0x12000000) +#define SW_DEVS 6 + +#define ETH_TX_TIMEOUT HZ*400 +#define ETH_FCS 4; + +#define ADM5120_CODE 0x00 /* CPU description */ +#define ADM5120_CODE_PQFP 0x20000000 /* package type */ +#define ADM5120_SW_CONF 0x20 /* Switch configuration register */ +#define ADM5120_SW_CONF_BPM 0x00300000 /* Mask for backpressure mode */ +#define ADM5120_CPUP_CONF 0x24 /* CPU port config */ +#define ADM5120_DISCCPUPORT 0x00000001 /* disable cpu port */ +#define ADM5120_CRC_PADDING 0x00000002 /* software crc */ +#define ADM5120_BTM 0x00000004 /* bridge test mode */ +#define ADM5120_DISUNSHIFT 9 +#define ADM5120_DISUNALL 0x00007e00 /* disable unknown from all */ +#define ADM5120_DISMCSHIFT 16 +#define ADM5120_DISMCALL 0x003f0000 /* disable multicast from all */ +#define ADM5120_PORT_CONF0 0x28 +#define ADM5120_ENMC 0x00003f00 /* Enable MC routing (ex cpu) */ +#define ADM5120_ENBP 0x003f0000 /* Enable Back Pressure */ +#define ADM5120_PORTDISALL 0x0000003F +#define ADM5120_VLAN_GI 0x40 /* VLAN settings */ +#define ADM5120_VLAN_GII 0x44 +#define ADM5120_SEND_TRIG 0x48 +#define ADM5120_SEND_TRIG_L 0x00000001 +#define ADM5120_SEND_TRIG_H 0x00000002 +#define ADM5120_MAC_WT0 0x58 +#define ADM5120_MAC_WRITE 0x00000001 +#define ADM5120_MAC_WRITE_DONE 0x00000002 +#define ADM5120_VLAN_EN 0x00000040 +#define ADM5120_MAC_WT1 0x5c +#define ADM5120_BW_CTL0 0x60 /* Bandwidth control 0 */ +#define ADM5120_BW_CTL1 0x64 /* Bandwidth control 1 */ +#define ADM5120_PHY_CNTL2 0x7c +#define ADM5120_AUTONEG 0x0000001f /* Auto negotiate */ +#define ADM5120_NORMAL 0x01f00000 /* PHY normal mode */ +#define ADM5120_AUTOMDIX 0x3e000000 /* Auto MDIX */ +#define ADM5120_PHY_CNTL3 0x80 +#define ADM5120_PHY_NTH 0x00000400 +#define ADM5120_PRI_CNTL 0x84 +#define ADM5120_INT_ST 0xb0 +#define ADM5120_INT_RXH 0x0000004 +#define ADM5120_INT_RXL 0x0000008 +#define ADM5120_INT_HFULL 0x0000010 +#define ADM5120_INT_LFULL 0x0000020 +#define ADM5120_INT_TXH 0x0000001 +#define ADM5120_INT_TXL 0x0000002 +#define ADM5120_INT_MASK 0xb4 +#define ADM5120_INTMASKALL 0x1FDEFFF /* All interrupts */ +#define ADM5120_INTHANDLE (ADM5120_INT_RXH | ADM5120_INT_RXL | \ + ADM5120_INT_HFULL | ADM5120_INT_LFULL | \ + ADM5120_INT_TXH | ADM5120_INT_TXL) +#define ADM5120_SEND_HBADDR 0xd0 +#define ADM5120_SEND_LBADDR 0xd4 +#define ADM5120_RECEIVE_HBADDR 0xd8 +#define ADM5120_RECEIVE_LBADDR 0xdc + +struct adm5120_dma { + u32 data; + u32 cntl; + u32 len; + u32 status; +} __attribute__ ((packed)); + +#define ADM5120_DMA_MASK 0x01ffffff +#define ADM5120_DMA_OWN 0x80000000 /* buffer owner */ +#define ADM5120_DMA_RINGEND 0x10000000 /* Last in DMA ring */ + +#define ADM5120_DMA_ADDR(ptr) ((u32)(ptr) & ADM5120_DMA_MASK) +#define ADM5120_DMA_PORTID 0x00007000 +#define ADM5120_DMA_PORTSHIFT 12 +#define ADM5120_DMA_LEN 0x07ff0000 +#define ADM5120_DMA_LENSHIFT 16 +#define ADM5120_DMA_FCSERR 0x00000008 + +#define ADM5120_DMA_TXH 2 +#define ADM5120_DMA_TXL 64 +#define ADM5120_DMA_RXH 2 +#define ADM5120_DMA_RXL 64 + +#define ADM5120_DMA_RXSIZE 1550 +#define ADM5120_DMA_EXTRA 20 + +struct adm5120_sw { + int port; + struct net_device_stats stats; +}; + +#define SIOCSMATRIX SIOCDEVPRIVATE +#define SIOCGMATRIX SIOCDEVPRIVATE+1 +#define SIOCGADMINFO SIOCDEVPRIVATE+2 +#define SIOCGETBW SIOCDEVPRIVATE+3 +#define SIOCSETBW SIOCDEVPRIVATE+4 + +struct adm5120_sw_info { + u16 magic; + u16 ports; + u16 vlan; +}; + +#endif /* _INCLUDE_ADM5120SW_H_ */ diff --git a/target/linux/adm5120/files/drivers/serial/adm5120_uart.c b/target/linux/adm5120/files/drivers/serial/adm5120_uart.c new file mode 100644 index 0000000000..83c5f72012 --- /dev/null +++ b/target/linux/adm5120/files/drivers/serial/adm5120_uart.c @@ -0,0 +1,520 @@ +/* + * Serial driver for ADM5120 SoC + * + * Derived from drivers/serial/uart00.c + * Copyright 2001 Altera Corporation + * + * Some pieces are derived from the ADMtek 2.4 serial driver. + * Copyright (C) ADMtek Incorporated, 2003 + * daniell@admtek.com.tw + * Which again was derived from drivers/char/serial.c + * Copyright (C) Linus Torvalds et al. + * + * Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005 + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define ADM5120_UART_REG(base, reg) \ + (*(volatile u32 *)KSEG1ADDR((base)+(reg))) + +#define ADM5120_UARTCLK_FREQ 62500000 +#define ADM5120_UART_BAUDDIV(rate) ((unsigned long)(ADM5120_UARTCLK_FREQ/(16*(rate)) - 1)) + +#define ADM5120_UART_BAUD115200 ADM5120_UART_BAUDDIV(115200) + +#define ADM5120_UART_DATA 0x00 +#define ADM5120_UART_RS 0x04 +#define ADM5120_UART_LCR_H 0x08 +#define ADM5120_UART_LCR_M 0x0c +#define ADM5120_UART_LCR_L 0x10 +#define ADM5120_UART_CR 0x14 +#define ADM5120_UART_FR 0x18 +#define ADM5120_UART_IR 0x1c + +#define ADM5120_UART_FE 0x01 +#define ADM5120_UART_PE 0x02 +#define ADM5120_UART_BE 0x04 +#define ADM5120_UART_OE 0x08 +#define ADM5120_UART_ERR 0x0f +#define ADM5120_UART_FIFO_EN 0x10 +#define ADM5120_UART_EN 0x01 +#define ADM5120_UART_TIE 0x20 +#define ADM5120_UART_RIE 0x50 +#define ADM5120_UART_IE 0x78 +#define ADM5120_UART_CTS 0x01 +#define ADM5120_UART_DSR 0x02 +#define ADM5120_UART_DCD 0x04 +#define ADM5120_UART_TXFF 0x20 +#define ADM5120_UART_TXFE 0x80 +#define ADM5120_UART_RXFE 0x10 +#define ADM5120_UART_BRK 0x01 +#define ADM5120_UART_PEN 0x02 +#define ADM5120_UART_EPS 0x04 +#define ADM5120_UART_STP2 0x08 +#define ADM5120_UART_W5 0x00 +#define ADM5120_UART_W6 0x20 +#define ADM5120_UART_W7 0x40 +#define ADM5120_UART_W8 0x60 +#define ADM5120_UART_MIS 0x01 +#define ADM5120_UART_RIS 0x02 +#define ADM5120_UART_TIS 0x04 +#define ADM5120_UART_RTIS 0x08 + +static void adm5120ser_stop_tx(struct uart_port *port) +{ + ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_TIE; +} + +static void adm5120ser_irq_rx(struct uart_port *port) +{ + struct tty_struct *tty = port->info->tty; + unsigned int status, ch, rds, flg, ignored = 0; + + status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); + while (!(status & ADM5120_UART_RXFE)) { + /* + * We need to read rds before reading the + * character from the fifo + */ + rds = ADM5120_UART_REG(port->iobase, ADM5120_UART_RS); + ch = ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA); + port->icount.rx++; + + if (tty->low_latency) + tty_flip_buffer_push(tty); + + flg = TTY_NORMAL; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (rds & ADM5120_UART_ERR) + goto handle_error; + if (uart_handle_sysrq_char(port, ch)) + goto ignore_char; + + error_return: + tty_insert_flip_char(tty, ch, flg); + + ignore_char: + status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); + } + out: + tty_flip_buffer_push(tty); + return; + + handle_error: + ADM5120_UART_REG(port->iobase, ADM5120_UART_RS) = 0xff; + if (rds & ADM5120_UART_BE) { + port->icount.brk++; + if (uart_handle_break(port)) + goto ignore_char; + } else if (rds & ADM5120_UART_PE) + port->icount.parity++; + else if (rds & ADM5120_UART_FE) + port->icount.frame++; + if (rds & ADM5120_UART_OE) + port->icount.overrun++; + + if (rds & port->ignore_status_mask) { + if (++ignored > 100) + goto out; + goto ignore_char; + } + rds &= port->read_status_mask; + + if (rds & ADM5120_UART_BE) + flg = TTY_BREAK; + else if (rds & ADM5120_UART_PE) + flg = TTY_PARITY; + else if (rds & ADM5120_UART_FE) + flg = TTY_FRAME; + + if (rds & ADM5120_UART_OE) { + /* + * CHECK: does overrun affect the current character? + * ASSUMPTION: it does not. + */ + tty_insert_flip_char(tty, ch, flg); + ch = 0; + flg = TTY_OVERRUN; + } +#ifdef CONFIG_MAGIC_SYSRQ + port->sysrq = 0; +#endif + goto error_return; +} + +static void adm5120ser_irq_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + int count; + + if (port->x_char) { + ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) = + port->x_char; + port->icount.tx++; + port->x_char = 0; + return; + } + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + adm5120ser_stop_tx(port); + return; + } + + count = port->fifosize >> 1; + do { + ADM5120_UART_REG(port->iobase, ADM5120_UART_DATA) = + xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + if (uart_circ_empty(xmit)) + break; + } while (--count > 0); + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + adm5120ser_stop_tx(port); +} + +static void adm5120ser_irq_modem(struct uart_port *port) +{ + unsigned int status; + + status = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); + + if (status & ADM5120_UART_DCD) + uart_handle_dcd_change(port, status & ADM5120_UART_DCD); + + if (status & ADM5120_UART_DSR) + port->icount.dsr++; + + if (status & ADM5120_UART_CTS) + uart_handle_cts_change(port, status & ADM5120_UART_CTS); + + wake_up_interruptible(&port->info->delta_msr_wait); +} + +static irqreturn_t adm5120ser_irq(int irq, void *dev_id) +{ + struct uart_port *port = dev_id; + unsigned long ir = ADM5120_UART_REG(port->iobase, ADM5120_UART_IR); + + if (ir & (ADM5120_UART_RIS | ADM5120_UART_RTIS)) + adm5120ser_irq_rx(port); + if (ir & ADM5120_UART_TIS) + adm5120ser_irq_tx(port); + if (ir & ADM5120_UART_MIS) { + adm5120ser_irq_modem(port); + ADM5120_UART_REG(port->iobase, ADM5120_UART_IR) = 0xff; + } + + return IRQ_HANDLED; +} + +static unsigned int adm5120ser_tx_empty(struct uart_port *port) +{ + unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); + return (fr & ADM5120_UART_TXFE) ? TIOCSER_TEMT : 0; +} + +static void adm5120ser_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int adm5120ser_get_mctrl(struct uart_port *port) +{ + unsigned int result = 0; + unsigned int fr = ADM5120_UART_REG(port->iobase, ADM5120_UART_FR); + + if (fr & ADM5120_UART_CTS) + result |= TIOCM_CTS; + if (fr & ADM5120_UART_DSR) + result |= TIOCM_DSR; + if (fr & ADM5120_UART_DCD) + result |= TIOCM_CAR; + return result; +} + +static void adm5120ser_start_tx(struct uart_port *port) +{ + ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= ADM5120_UART_TIE; +} + +static void adm5120ser_stop_rx(struct uart_port *port) +{ + ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_RIE; +} + +static void adm5120ser_enable_ms(struct uart_port *port) +{ +} + +static void adm5120ser_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + unsigned long lcrh; + + spin_lock_irqsave(&port->lock, flags); + lcrh = ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H); + if (break_state == -1) + lcrh |= ADM5120_UART_BRK; + else + lcrh &= ~ADM5120_UART_BRK; + ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh; + spin_unlock_irqrestore(&port->lock, flags); +} + +static int adm5120ser_startup(struct uart_port *port) +{ + int ret; + + ret = request_irq(port->irq, adm5120ser_irq, 0, "ADM5120 UART", port); + if (ret) { + printk(KERN_ERR "Couldn't get irq %d\n", port->irq); + return ret; + } + ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) |= + ADM5120_UART_FIFO_EN; + ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) |= + ADM5120_UART_EN | ADM5120_UART_IE; + return 0; +} + +static void adm5120ser_shutdown(struct uart_port *port) +{ + ADM5120_UART_REG(port->iobase, ADM5120_UART_CR) &= ~ADM5120_UART_IE; + free_irq(port->irq, port); +} + +static void adm5120ser_set_termios(struct uart_port *port, + struct ktermios *termios, struct ktermios *old) +{ + unsigned int baud, quot, lcrh; + unsigned long flags; + + termios->c_cflag |= CREAD; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + lcrh = ADM5120_UART_FIFO_EN; + switch (termios->c_cflag & CSIZE) { + case CS5: + lcrh |= ADM5120_UART_W5; + break; + case CS6: + lcrh |= ADM5120_UART_W6; + break; + case CS7: + lcrh |= ADM5120_UART_W7; + break; + default: + lcrh |= ADM5120_UART_W8; + break; + } + if (termios->c_cflag & CSTOPB) + lcrh |= ADM5120_UART_STP2; + if (termios->c_cflag & PARENB) { + lcrh |= ADM5120_UART_PEN; + if (!(termios->c_cflag & PARODD)) + lcrh |= ADM5120_UART_EPS; + } + + spin_lock_irqsave(port->lock, flags); + + ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_H) = lcrh; + + /* + * Update the per-port timeout. + */ + uart_update_timeout(port, termios->c_cflag, baud); + + port->read_status_mask = ADM5120_UART_OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= ADM5120_UART_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ADM5120_UART_FE | ADM5120_UART_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= ADM5120_UART_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns to (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= ADM5120_UART_OE; + } + + quot = ADM5120_UART_BAUD115200; + ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_L) = quot & 0xff; + ADM5120_UART_REG(port->iobase, ADM5120_UART_LCR_M) = quot >> 8; + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *adm5120ser_type(struct uart_port *port) +{ + return port->type == PORT_ADM5120 ? "ADM5120" : NULL; +} + +static void adm5120ser_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_ADM5120; +} + +static void adm5120ser_release_port(struct uart_port *port) +{ + release_mem_region(port->iobase, ADM5120_UART_SIZE); +} + +static int adm5120ser_request_port(struct uart_port *port) +{ + return request_mem_region(port->iobase, ADM5120_UART_SIZE, + "adm5120-uart") != NULL ? 0 : -EBUSY; +} + +static struct uart_ops adm5120ser_ops = { + .tx_empty = adm5120ser_tx_empty, + .set_mctrl = adm5120ser_set_mctrl, + .get_mctrl = adm5120ser_get_mctrl, + .stop_tx = adm5120ser_stop_tx, + .start_tx = adm5120ser_start_tx, + .stop_rx = adm5120ser_stop_rx, + .enable_ms = adm5120ser_enable_ms, + .break_ctl = adm5120ser_break_ctl, + .startup = adm5120ser_startup, + .shutdown = adm5120ser_shutdown, + .set_termios = adm5120ser_set_termios, + .type = adm5120ser_type, + .config_port = adm5120ser_config_port, + .release_port = adm5120ser_release_port, + .request_port = adm5120ser_request_port, +}; + +static void adm5120console_put(const char c) +{ + while ((ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_FR) & + ADM5120_UART_TXFF) != 0); + ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_DATA) = c; +} + +static void adm5120console_write(struct console *con, const char *s, + unsigned int count) +{ + while (count--) { + if (*s == '\n') + adm5120console_put('\r'); + adm5120console_put(*s); + s++; + } +} + +static int adm5120console_setup(struct console *con, char *options) +{ + /* Set to 115200 baud, 8N1 and enable FIFO */ + ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_L) = + ADM5120_UART_BAUD115200 & 0xff; + ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_M) = + ADM5120_UART_BAUD115200 >> 8; + ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_LCR_H) = + ADM5120_UART_W8 | ADM5120_UART_FIFO_EN; + /* Enable port */ + ADM5120_UART_REG(ADM5120_UART0_BASE, ADM5120_UART_CR) = + ADM5120_UART_EN; + + return 0; +} + +static struct uart_driver adm5120ser_reg; + +static struct console adm5120_serconsole = { + .name = "ttyS", + .write = adm5120console_write, + .device = uart_console_device, + .setup = adm5120console_setup, + .flags = CON_PRINTBUFFER, + .cflag = B115200 | CS8 | CREAD, + .index = 0, + .data = &adm5120ser_reg, +}; + +static int __init adm5120console_init(void) +{ + register_console(&adm5120_serconsole); + return 0; +} + +console_initcall(adm5120console_init); + + +static struct uart_port adm5120ser_ports[] = { + { + .iobase = ADM5120_UART0_BASE, + .irq = ADM5120_IRQ_UART0, + .uartclk = ADM5120_UARTCLK_FREQ, + .fifosize = 16, + .ops = &adm5120ser_ops, + .line = 0, + .flags = ASYNC_BOOT_AUTOCONF, + }, +#if (CONFIG_ADM5120_NR_UARTS > 1) + { + .iobase = ADM5120_UART1_BASE, + .irq = ADM5120_IRQ_UART1, + .uartclk = ADM5120_UARTCLK_FREQ, + .fifosize = 16, + .ops = &adm5120ser_ops, + .line = 1, + .flags = ASYNC_BOOT_AUTOCONF, + }, +#endif +}; + +static struct uart_driver adm5120ser_reg = { + .owner = THIS_MODULE, + .driver_name = "ttyS", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = CONFIG_ADM5120_NR_UARTS, + .cons = &adm5120_serconsole, +}; + +static int __init adm5120ser_init(void) +{ + int ret, i; + + ret = uart_register_driver(&adm5120ser_reg); + if (!ret) { + for (i = 0; i < CONFIG_ADM5120_NR_UARTS; i++) + uart_add_one_port(&adm5120ser_reg, &adm5120ser_ports[i]); + } + + return ret; +} + +__initcall(adm5120ser_init); diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c new file mode 100644 index 0000000000..4e88777287 --- /dev/null +++ b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c @@ -0,0 +1,996 @@ +/* + * HCD driver for ADM5120 SoC + * + * Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org) + * + * Based on the ADMtek 2.4 driver + * (C) Copyright 2003 Junius Chen + * Which again was based on the ohci and uhci drivers. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "../core/hcd.h" + +MODULE_DESCRIPTION("ADM5120 USB Host Controller Driver"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)"); + +#define PFX "adm5120-hcd: " + +#define ADMHCD_REG_CONTROL 0x00 +#define ADMHCD_SW_RESET 0x00000008 /* Reset */ +#define ADMHCD_DMAA 0x00000004 /* DMA arbitration control */ +#define ADMHCD_SW_INTREQ 0x00000002 /* request software int */ +#define ADMHCD_HOST_EN 0x00000001 /* Host enable */ +#define ADMHCD_REG_INTSTATUS 0x04 +#define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */ +#define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */ +#define ADMHCD_INT_SW 0x20000000 /* software interrupt */ +#define ADMHCD_INT_TD 0x00100000 /* TD completed */ +#define ADMHCD_FNO 0x00000800 /* Frame number overaflow */ +#define ADMHCD_SO 0x00000400 /* Scheduling overrun */ +#define ADMHCD_INSMI 0x00000200 /* Root hub status change */ +#define ADMHCD_BABI 0x00000100 /* Babble detected, host mode */ +#define ADMHCD_RESI 0x00000020 /* Resume detected */ +#define ADMHCD_SOFI 0x00000010 /* SOF transmitted/received, host mode */ +#define ADMHCD_REG_INTENABLE 0x08 +#define ADMHCD_INT_EN 0x80000000 /* Interrupt enable */ +#define ADMHCD_INTMASK 0x00000001 /* Interrupt mask */ +#define ADMHCD_REG_HOSTCONTROL 0x10 +#define ADMHCD_DMA_EN 0x00000004 /* USB host DMA enable */ +#define ADMHCD_STATE_MASK 0x00000003 +#define ADMHCD_STATE_RST 0x00000000 /* bus state reset */ +#define ADMHCD_STATE_RES 0x00000001 /* bus state resume */ +#define ADMHCD_STATE_OP 0x00000002 /* bus state operational */ +#define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */ +#define ADMHCD_REG_FMINTERVAL 0x18 +#define ADMHCD_REG_FMNUMBER 0x1c +#define ADMHCD_REG_LSTHRESH 0x70 +#define ADMHCD_REG_RHDESCR 0x74 +#define ADMHCD_CRWE 0x20000000 /* Clear wakeup enable */ +#define ADMHCD_DRWE 0x10000000 /* Device remote wakeup enable */ +#define ADMHCD_HW_OCIC 0x08000000 /* Over current indication change */ +#define ADMHCD_LPSC 0x04000000 /* Local power switch change */ +#define ADMHCD_OCI 0x02000000 /* Over current indication */ +#define ADMHCD_LPS 0x01000000 /* Local power switch/global power switch */ +#define ADMHCD_NOCP 0x00000800 /* No over current protect mode */ +#define ADMHCD_OPCM 0x00000400 /* Over current protect mode */ +#define ADMHCD_NPS 0x00000200 /* No Power Switch */ +#define ADMHCD_PSM 0x00000100 /* Power switch mode */ +#define ADMHCD_REG_PORTSTATUS0 0x78 +#define ADMHCD_CCS 0x00000001 /* current connect status */ +#define ADMHCD_PES 0x00000002 /* port enable status */ +#define ADMHCD_PSS 0x00000004 /* port suspend status */ +#define ADMHCD_POCI 0x00000008 /* port overcurrent indicator */ +#define ADMHCD_PRS 0x00000010 /* port reset status */ +#define ADMHCD_PPS 0x00000100 /* port power status */ +#define ADMHCD_LSDA 0x00000200 /* low speed device attached */ +#define ADMHCD_CSC 0x00010000 /* connect status change */ +#define ADMHCD_PESC 0x00020000 /* enable status change */ +#define ADMHCD_PSSC 0x00040000 /* suspend status change */ +#define ADMHCD_OCIC 0x00080000 /* overcurrent change*/ +#define ADMHCD_PRSC 0x00100000 /* reset status change */ +#define ADMHCD_REG_PORTSTATUS1 0x7c +#define ADMHCD_REG_HOSTHEAD 0x80 + +#define ADMHCD_NUMPORTS 1 +#define ADMHCD_DESC_ALIGN 16 + +struct admhcd_ed { + /* Don't change first four, they used for DMA */ + u32 control; + struct admhcd_td *tail; + struct admhcd_td *head; + struct admhcd_ed *next; + /* the rest is for the driver only: */ + struct admhcd_td *cur; + struct usb_host_endpoint *ep; + struct urb *urb; + struct admhcd_ed *real; +} __attribute__ ((packed)); + +#define ADMHCD_ED_EPSHIFT 7 /* Shift for endpoint number */ +#define ADMHCD_ED_INT 0x00000800 /* Is this an int endpoint */ +#define ADMHCD_ED_SPEED 0x00002000 /* Is it a high speed dev? */ +#define ADMHCD_ED_SKIP 0x00004000 /* Skip this ED */ +#define ADMHCD_ED_FORMAT 0x00008000 /* Is this an isoc endpoint */ +#define ADMHCD_ED_MAXSHIFT 16 /* Shift for max packet size */ + +struct admhcd_td { + /* Don't change first four, they are used for DMA */ + u32 control; + u32 buffer; + u32 buflen; + struct admhcd_td *next; + /* the rest is for the driver only: */ + struct urb *urb; + struct admhcd_td *real; +} __attribute__ ((packed)); + +#define ADMHCD_TD_OWN 0x80000000 +#define ADMHCD_TD_TOGGLE 0x00000000 +#define ADMHCD_TD_DATA0 0x01000000 +#define ADMHCD_TD_DATA1 0x01800000 +#define ADMHCD_TD_OUT 0x00200000 +#define ADMHCD_TD_IN 0x00400000 +#define ADMHCD_TD_SETUP 0x00000000 +#define ADMHCD_TD_ISO 0x00010000 +#define ADMHCD_TD_R 0x00040000 +#define ADMHCD_TD_INTEN 0x00010000 + +static int admhcd_td_err[16] = { + 0, /* No */ + -EREMOTEIO, /* CRC */ + -EREMOTEIO, /* bit stuff */ + -EREMOTEIO, /* data toggle */ + -EPIPE, /* stall */ + -ETIMEDOUT, /* timeout */ + -EPROTO, /* pid err */ + -EPROTO, /* unexpected pid */ + -EREMOTEIO, /* data overrun */ + -EREMOTEIO, /* data underrun */ + -ETIMEDOUT, /* 1010 */ + -ETIMEDOUT, /* 1011 */ + -EREMOTEIO, /* buffer overrun */ + -EREMOTEIO, /* buffer underrun */ + -ETIMEDOUT, /* 1110 */ + -ETIMEDOUT, /* 1111 */ +}; + +#define ADMHCD_TD_ERRMASK 0x38000000 +#define ADMHCD_TD_ERRSHIFT 27 + +#define TD(td) ((struct admhcd_td *)(((u32)(td)) & ~(ADMHCD_DESC_ALIGN-1))) +#define ED(ed) ((struct admhcd_ed *)(((u32)(ed)) & ~(ADMHCD_DESC_ALIGN-1))) + +struct admhcd { + spinlock_t lock; + + /* Root hub registers */ + u32 rhdesca; + u32 rhdescb; + u32 rhstatus; + u32 rhport[2]; + + /* async schedule: control, bulk */ + struct list_head async; + u32 base; + u32 dma_en; + unsigned long flags; +}; + +static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd) +{ + return (struct admhcd *)(hcd->hcd_priv); +} + +static inline struct usb_hcd *admhcd_to_hcd(struct admhcd *admhcd) +{ + return container_of((void *)admhcd, struct usb_hcd, hcd_priv); +} + +static char hcd_name[] = "adm5120-hcd"; + +static u32 admhcd_reg_get(struct admhcd *ahcd, int reg) +{ + return *(volatile u32 *)KSEG1ADDR(ahcd->base+reg); +} + +static void admhcd_reg_set(struct admhcd *ahcd, int reg, u32 val) +{ + *(volatile u32 *)KSEG1ADDR(ahcd->base+reg) = val; +} + +static void admhcd_lock(struct admhcd *ahcd) +{ + spin_lock_irqsave(&ahcd->lock, ahcd->flags); + ahcd->dma_en = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) & + ADMHCD_DMA_EN; + admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP); +} + +static void admhcd_unlock(struct admhcd *ahcd) +{ + admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, + ADMHCD_STATE_OP | ahcd->dma_en); + spin_unlock_irqrestore(&ahcd->lock, ahcd->flags); +} + +static struct admhcd_td *admhcd_td_alloc(struct admhcd_ed *ed, struct urb *urb) +{ + struct admhcd_td *tdn, *td; + + tdn = kzalloc(sizeof(*tdn)+ADMHCD_DESC_ALIGN, GFP_ATOMIC); + if (!tdn) + return NULL; + + tdn->real = tdn; + tdn = TD(KSEG1ADDR(tdn)); + if (ed->cur == NULL) { + ed->cur = tdn; + ed->head = tdn; + ed->tail = tdn; + td = tdn; + } else { + /* Supply back the old tail and link in new td as tail */ + td = TD(ed->tail); + TD(ed->tail)->next = tdn; + ed->tail = tdn; + } + td->urb = urb; + + return td; +} + +static void admhcd_td_free(struct admhcd_ed *ed, struct urb *urb) +{ + struct admhcd_td *td, **tdp; + + if (urb == NULL) + ed->control |= ADMHCD_ED_SKIP; + tdp = &ed->cur; + td = ed->cur; + do { + if (td->urb == urb) + break; + tdp = &td->next; + td = TD(td->next); + } while (td); + while (td && td->urb == urb) { + *tdp = TD(td->next); + kfree(td->real); + td = *tdp; + } +} + +/* Find an endpoint's descriptor, if needed allocate a new one and link it + in the DMA chain + */ +static struct admhcd_ed *admhcd_get_ed(struct admhcd *ahcd, + struct usb_host_endpoint *ep, struct urb *urb) +{ + struct admhcd_ed *hosthead; + struct admhcd_ed *found = NULL, *ed = NULL; + unsigned int pipe = urb->pipe; + + admhcd_lock(ahcd); + hosthead = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD); + if (hosthead) { + for (ed = hosthead;; ed = ED(ed->next)) { + if (ed->ep == ep) { + found = ed; + break; + } + if (ED(ed->next) == hosthead) + break; + } + } + if (!found) { + found = kzalloc(sizeof(*found)+ADMHCD_DESC_ALIGN, GFP_ATOMIC); + if (!found) + goto out; + found->real = found; + found->ep = ep; + found = ED(KSEG1ADDR(found)); + found->control = usb_pipedevice(pipe) | + (usb_pipeendpoint(pipe) << ADMHCD_ED_EPSHIFT) | + (usb_pipeint(pipe) ? ADMHCD_ED_INT : 0) | + (urb->dev->speed == USB_SPEED_FULL ? ADMHCD_ED_SPEED : 0) | + (usb_pipeisoc(pipe) ? ADMHCD_ED_FORMAT : 0) | + (usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)) << ADMHCD_ED_MAXSHIFT); + /* Alloc first dummy td */ + admhcd_td_alloc(found, NULL); + if (hosthead) { + found->next = hosthead; + ed->next = found; + } else { + found->next = found; + admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)found); + } + } +out: + admhcd_unlock(ahcd); + return found; +} + +static struct admhcd_td *admhcd_td_fill(u32 control, struct admhcd_td *td, + dma_addr_t data, int len) +{ + td->buffer = data; + td->buflen = len; + td->control = control; + return TD(td->next); +} + +static void admhcd_ed_start(struct admhcd *ahcd, struct admhcd_ed *ed) +{ + struct admhcd_td *td = ed->cur; + + if (ed->urb) + return; + if (td->urb) { + ed->urb = td->urb; + while (1) { + td->control |= ADMHCD_TD_OWN; + if (TD(td->next)->urb != td->urb) { + td->buflen |= ADMHCD_TD_INTEN; + break; + } + td = TD(td->next); + } + } + ed->head = TD(ed->head); + ahcd->dma_en |= ADMHCD_DMA_EN; +} + +static irqreturn_t admhcd_irq(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + u32 intstatus; + + intstatus = admhcd_reg_get(ahcd, ADMHCD_REG_INTSTATUS); + if (intstatus & ADMHCD_INT_FATAL) { + admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_FATAL); + /* FIXME: handle fatal interrupts */ + } + + if (intstatus & ADMHCD_INT_SW) { + admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_SW); + /* FIXME: handle software interrupts */ + } + + if (intstatus & ADMHCD_INT_TD) { + struct admhcd_ed *ed, *head; + + admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_TD); + + head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD); + ed = head; + if (ed) do { + /* Is it a finished TD? */ + if (ed->urb && !(ed->cur->control & ADMHCD_TD_OWN)) { + struct admhcd_td *td; + int error; + + td = ed->cur; + error = (td->control & ADMHCD_TD_ERRMASK) >> + ADMHCD_TD_ERRSHIFT; + ed->urb->status = admhcd_td_err[error]; + admhcd_td_free(ed, ed->urb); + // Calculate real length!!! + ed->urb->actual_length = ed->urb->transfer_buffer_length; + ed->urb->hcpriv = NULL; + usb_hcd_giveback_urb(hcd, ed->urb); + ed->urb = NULL; + } + admhcd_ed_start(ahcd, ed); + ed = ED(ed->next); + } while (ed != head); + } + + return IRQ_HANDLED; +} + +static int admhcd_urb_enqueue(struct usb_hcd *hcd, struct usb_host_endpoint *ep, + struct urb *urb, gfp_t mem_flags) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + struct admhcd_ed *ed; + struct admhcd_td *td; + int size = 0, i, zero = 0, ret = 0; + unsigned int pipe = urb->pipe, toggle = 0; + dma_addr_t data = (dma_addr_t)urb->transfer_buffer; + int data_len = urb->transfer_buffer_length; + + ed = admhcd_get_ed(ahcd, ep, urb); + if (!ed) + return -ENOMEM; + + switch(usb_pipetype(pipe)) { + case PIPE_CONTROL: + size = 2; + case PIPE_INTERRUPT: + case PIPE_BULK: + default: + size += urb->transfer_buffer_length / 4096; + if (urb->transfer_buffer_length % 4096) + size++; + if (size == 0) + size++; + else if (urb->transfer_flags & URB_ZERO_PACKET && + !(urb->transfer_buffer_length % + usb_maxpacket(urb->dev, pipe, usb_pipeout(pipe)))) { + size++; + zero = 1; + } + break; + case PIPE_ISOCHRONOUS: + size = urb->number_of_packets; + break; + } + + admhcd_lock(ahcd); + /* Remember the first td */ + td = admhcd_td_alloc(ed, urb); + if (!td) { + ret = -ENOMEM; + goto out; + } + /* Allocate additionall tds first */ + for (i = 1; i < size; i++) { + if (admhcd_td_alloc(ed, urb) == NULL) { + admhcd_td_free(ed, urb); + ret = -ENOMEM; + goto out; + } + } + + if (usb_gettoggle(urb->dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) + toggle = ADMHCD_TD_TOGGLE; + else { + toggle = ADMHCD_TD_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint(pipe), + usb_pipeout(pipe), 1); + } + + switch(usb_pipetype(pipe)) { + case PIPE_CONTROL: + td = admhcd_td_fill(ADMHCD_TD_SETUP | ADMHCD_TD_DATA0, + td, (dma_addr_t)urb->setup_packet, 8); + while (data_len > 0) { + td = admhcd_td_fill(ADMHCD_TD_DATA1 + | ADMHCD_TD_R | + (usb_pipeout(pipe) ? + ADMHCD_TD_OUT : ADMHCD_TD_IN), td, + data, data_len % 4097); + data_len -= 4096; + } + admhcd_td_fill(ADMHCD_TD_DATA1 | (usb_pipeout(pipe) ? + ADMHCD_TD_IN : ADMHCD_TD_OUT), td, + data, 0); + break; + case PIPE_INTERRUPT: + case PIPE_BULK: + //info ok for interrupt? + i = 0; + while(data_len > 4096) { + td = admhcd_td_fill((usb_pipeout(pipe) ? + ADMHCD_TD_OUT : + ADMHCD_TD_IN | ADMHCD_TD_R) | + (i ? ADMHCD_TD_TOGGLE : toggle), td, + data, 4096); + data += 4096; + data_len -= 4096; + i++; + } + td = admhcd_td_fill((usb_pipeout(pipe) ? + ADMHCD_TD_OUT : ADMHCD_TD_IN) | + (i ? ADMHCD_TD_TOGGLE : toggle), td, data, data_len); + i++; + if (zero) + admhcd_td_fill((usb_pipeout(pipe) ? + ADMHCD_TD_OUT : ADMHCD_TD_IN) | + (i ? ADMHCD_TD_TOGGLE : toggle), td, 0, 0); + break; + case PIPE_ISOCHRONOUS: + for (i = 0; i < urb->number_of_packets; i++) { + td = admhcd_td_fill(ADMHCD_TD_ISO | + ((urb->start_frame + i) & 0xffff), td, + data + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length); + } + break; + } + urb->hcpriv = ed; + admhcd_ed_start(ahcd, ed); +out: + admhcd_unlock(ahcd); + return ret; +} + +static int admhcd_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + struct admhcd_ed *ed; + + admhcd_lock(ahcd); + + ed = urb->hcpriv; + if (ed && ed->urb != urb) + admhcd_td_free(ed, urb); + + admhcd_unlock(ahcd); + return 0; +} + +static void admhcd_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + struct admhcd_ed *ed, *edt, *head; + + admhcd_lock(ahcd); + + head = (struct admhcd_ed *)admhcd_reg_get(ahcd, ADMHCD_REG_HOSTHEAD); + if (!head) + goto out; + for (ed = head; ED(ed->next) != head; ed = ED(ed->next)) + if (ed->ep == ep) + break; + if (ed->ep != ep) + goto out; + while (ed->cur) + admhcd_td_free(ed, ed->cur->urb); + if (head == ed) { + if (ED(ed->next) == ed) { + admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0); + ahcd->dma_en = 0; + goto out_free; + } + head = ED(ed->next); + for (edt = head; ED(edt->next) != head; edt = ED(edt->next)); + edt->next = ED(ed->next); + admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, (u32)ed->next); + goto out_free; + } + for (edt = head; edt->next != ed; edt = edt->next); + edt->next = ed->next; + +out_free: + kfree(ed->real); +out: + admhcd_unlock(ahcd); +} + +static int admhcd_get_frame_number(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + + return admhcd_reg_get(ahcd, ADMHCD_REG_FMNUMBER) & 0x0000ffff; +} + +static int admhcd_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + int port; + + *buf = 0; + for (port = 0; port < ADMHCD_NUMPORTS; port++) { + if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) & + (ADMHCD_CSC | ADMHCD_PESC | ADMHCD_PSSC | ADMHCD_OCIC | + ADMHCD_PRSC)) + *buf |= (1 << (port + 1)); + } + return !!*buf; +} + +static __u8 root_hub_hub_des[] = { + 0x09, /* __u8 bLength; */ + 0x29, /* __u8 bDescriptorType; Hub-descriptor */ + 0x02, /* __u8 bNbrPorts; */ + 0x0a, 0x00, /* __u16 wHubCharacteristics; */ + 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ + 0x00, /* __u8 bHubContrCurrent; 0mA */ + 0x00, /* __u8 DeviceRemovable; */ + 0xff, /* __u8 PortPwrCtrlMask; */ +}; + +static int admhcd_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + int retval = 0, len; + unsigned int port = wIndex -1; + + switch (typeReq) { + + case GetHubStatus: + *(__le32 *)buf = cpu_to_le32(0); + break; + case GetPortStatus: + if (port >= ADMHCD_NUMPORTS) + goto err; + *(__le32 *)buf = cpu_to_le32( + admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4)); + break; + case SetHubFeature: /* We don't implement these */ + case ClearHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto err; + } + case SetPortFeature: + if (port >= ADMHCD_NUMPORTS) + goto err; + + switch (wValue) { + case USB_PORT_FEAT_SUSPEND: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_PSS); + break; + case USB_PORT_FEAT_RESET: + if (admhcd_reg_get(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4) + & ADMHCD_CCS) { + admhcd_reg_set(ahcd, + ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_PRS | ADMHCD_CSC); + mdelay(50); + admhcd_reg_set(ahcd, + ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_PES | ADMHCD_CSC); + } + break; + case USB_PORT_FEAT_POWER: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_PPS); + break; + default: + goto err; + } + break; + case ClearPortFeature: + if (port >= ADMHCD_NUMPORTS) + goto err; + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_CCS); + break; + case USB_PORT_FEAT_C_ENABLE: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_PESC); + break; + case USB_PORT_FEAT_SUSPEND: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_POCI); + break; + case USB_PORT_FEAT_C_SUSPEND: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_PSSC); + case USB_PORT_FEAT_POWER: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_LSDA); + break; + case USB_PORT_FEAT_C_CONNECTION: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_CSC); + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_OCIC); + break; + case USB_PORT_FEAT_C_RESET: + admhcd_reg_set(ahcd, ADMHCD_REG_PORTSTATUS0 + port*4, + ADMHCD_PRSC); + break; + default: + goto err; + } + break; + case GetHubDescriptor: + len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength); + memcpy(buf, root_hub_hub_des, len); + break; + default: +err: + retval = -EPIPE; + } + + return retval; +} + +static int admhcd_start(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + unsigned long flags; + + spin_lock_irqsave(&ahcd->lock, flags); + + /* Initialise the HCD registers */ + admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0); + mdelay(10); + + admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET); + + while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET) { + printk(KERN_WARNING PFX "waiting for reset to complete\n"); + mdelay(1); + } + + //hcd->uses_new_polling = 1; + + /* Enable USB host mode */ + admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN); + + /* Set host specific settings */ + admhcd_reg_set(ahcd, ADMHCD_REG_HOSTHEAD, 0x00000000); + admhcd_reg_set(ahcd, ADMHCD_REG_FMINTERVAL, 0x20002edf); + admhcd_reg_set(ahcd, ADMHCD_REG_LSTHRESH, 0x628); + + /* Set interrupts */ + admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, ADMHCD_INT_ACT | + ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD); + admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS, ADMHCD_INT_ACT | + ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD); + + /* Power on all ports */ + admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC); + + /* HCD is now operationnal */ + admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP); + + hcd->state = HC_STATE_RUNNING; + + spin_unlock_irqrestore(&ahcd->lock, flags); + + return 0; +} + +static int admhcd_sw_reset(struct admhcd *ahcd) +{ + int retries = 15; + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ahcd->lock, flags); + + admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0); + mdelay(10); + + admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET); + + while (--retries) { + mdelay(1); + if (!(admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET)) + break; + } + if (!retries) { + printk(KERN_WARNING "%s: software reset timeout\n", hcd_name); + ret = -ETIME; + } + spin_unlock_irqrestore(&ahcd->lock, flags); + return ret; +} + +static int admhcd_reset(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + u32 state = 0; + int ret, timeout = 15; /* ms */ + unsigned long t; + + ret = admhcd_sw_reset(ahcd); + if (ret) + return ret; + + t = jiffies + msecs_to_jiffies(timeout); + do { + spin_lock_irq(&ahcd->lock); + state = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL); + spin_unlock_irq(&ahcd->lock); + state &= ADMHCD_STATE_MASK; + if (state == ADMHCD_STATE_RST) + break; + msleep(4); + } while (time_before_eq(jiffies, t)); + + if (state != ADMHCD_STATE_RST) { + printk(KERN_WARNING "%s: device not ready after %dms\n", + hcd_name, timeout); + ret = -ENODEV; + } + + return ret; +} + +static void admhcd_stop(struct usb_hcd *hcd) +{ + struct admhcd *ahcd = hcd_to_admhcd(hcd); + unsigned long flags; + u32 val; + + spin_lock_irqsave(&ahcd->lock, flags); + admhcd_reg_set(ahcd, ADMHCD_REG_INTENABLE, 0); + + /* Set global control of power for ports */ + val = admhcd_reg_get(ahcd, ADMHCD_REG_RHDESCR); + val &= (~ADMHCD_PSM | ADMHCD_LPS); + admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, val); + + spin_unlock_irqrestore(&ahcd->lock, flags); + + /* Ask for software reset */ + admhcd_sw_reset(ahcd); +} + + +static struct hc_driver adm5120_hc_driver = { + .description = hcd_name, + .product_desc = "ADM5120 HCD", + .hcd_priv_size = sizeof(struct admhcd), + .irq = admhcd_irq, + .flags = HCD_USB11, + .urb_enqueue = admhcd_urb_enqueue, + .urb_dequeue = admhcd_urb_dequeue, + .endpoint_disable = admhcd_endpoint_disable, + .get_frame_number = admhcd_get_frame_number, + .hub_status_data = admhcd_hub_status_data, + .hub_control = admhcd_hub_control, + .start = admhcd_start, + .stop = admhcd_stop, + .reset = admhcd_reset, +}; + +#define resource_len(r) (((r)->end - (r)->start) + 1) + +static int __init adm5120hcd_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct admhcd *ahcd; + struct resource *data; + void __iomem *data_reg; + + int err = 0, irq; + + if (pdev->num_resources < 2) { + printk(KERN_WARNING PFX "not enough resources\n"); + err = -ENODEV; + goto out; + } + + irq = platform_get_irq(pdev, 0); + data = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (pdev->dev.dma_mask) { + printk(KERN_DEBUG PFX "no we won't dma\n"); + return -EINVAL; + } + + if (!data || irq < 0) { + printk(KERN_DEBUG PFX "either IRQ or data resource is invalid\n"); + err = -ENODEV; + goto out; + } + + if (!request_mem_region(data->start, resource_len(data), hcd_name)) { + printk(KERN_DEBUG PFX "cannot request memory regions for the data resource\n"); + err = -EBUSY; + goto out; + } + + data_reg = ioremap(data->start, resource_len(data)); + if (data_reg == NULL) { + printk(KERN_DEBUG PFX "unable to ioremap\n"); + err = -ENOMEM; + goto out_mem; + } + + hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id); + if (!hcd) { + printk(KERN_DEBUG PFX "unable to create the hcd\n"); + err = -ENOMEM; + goto out_unmap; + } + + hcd->rsrc_start = data->start; + hcd->rsrc_len = resource_len(data); + hcd->regs = data_reg; + + ahcd = hcd_to_admhcd(hcd); + ahcd->base = (u32)data_reg; + + spin_lock_init(&ahcd->lock); + INIT_LIST_HEAD(&ahcd->async); + + hcd->product_desc = "ADM5120 HCD"; + + err = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (err) { + printk(KERN_DEBUG PFX "unable to add hcd\n"); + goto out_dev; + } + + return 0; + +out_dev: + usb_put_hcd(hcd); +out_unmap: + iounmap(data_reg); +out_mem: + release_mem_region(data->start, resource_len(data)); +out: + return err; +} + +#ifdef CONFIG_PM +static int adm5120hcd_suspend(struct platform_device *pdev, pm_message_t state) +{ + pdev->dev.power.power_state = state; + mdelay(1); + return 0; +} + +static int adm5120hcd_resume(struct platform_device *pdev, pm_message_t state) +{ + pdev->dev.power.power_state = PMSG_ON; + mdelay(1); + return 0; +} +#else +#define adm5120hcd_suspend NULL +#define adm5120hcd_resume NULL +#endif + +static int __init_or_module adm5120hcd_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct admhcd *ahcd; + + if (!hcd) + return 0; + ahcd = hcd_to_admhcd(hcd); + usb_remove_hcd(hcd); + + usb_put_hcd(hcd); + return 0; +} + +static struct platform_driver adm5120hcd_driver = { + .probe = adm5120hcd_probe, + .remove = adm5120hcd_remove, + .suspend = adm5120hcd_suspend, + .remove = adm5120hcd_resume, + .driver = { + .name = (char *)hcd_name, + .owner = THIS_MODULE, + }, +}; + +static int __init adm5120hcd_init(void) +{ + int ret; + + if (usb_disabled()) { + printk(KERN_DEBUG PFX "USB support is disabled\n"); + return -ENODEV; + } + + if (mips_machgroup != MACH_GROUP_ADM5120) { + printk(KERN_DEBUG PFX "unsupported machine group\n"); + return -ENODEV; + } + + ret = platform_driver_register(&adm5120hcd_driver); + if (ret == 0) + printk(KERN_INFO PFX "registered\n"); + + return ret; +} + +static void __exit adm5120hcd_exit(void) +{ + platform_driver_unregister(&adm5120hcd_driver); + printk(KERN_INFO PFX "driver unregistered\n"); +} + +module_init(adm5120hcd_init); +module_exit(adm5120hcd_exit); diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h new file mode 100644 index 0000000000..23f62a2932 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h @@ -0,0 +1,50 @@ +/* + * $Id$ + * + * ADM5120 board definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_BOARD_H_ +#define _ADM5120_BOARD_H_ + +#include +#include + +#define ADM5120_BOARD_NAMELEN 64 + +struct adm5120_board { + unsigned long mach_type; + char name[ADM5120_BOARD_NAMELEN]; + + void (*board_setup)(void); + void (*board_reset)(void); + + unsigned int eth_num_ports; + unsigned char *eth_vlans; + unsigned int num_devices; + struct platform_device **devices; + + struct list_head list; +}; + +extern void adm5120_board_register(struct adm5120_board *) __init; + +#endif /* _ADM5120_BOARD_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h new file mode 100644 index 0000000000..f5ab1b3f1c --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h @@ -0,0 +1,60 @@ +/* + * $Id$ + * + * ADM5120 SoC definitions + * + * This file defines some constants specific to the ADM5120 SoC + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#ifndef _ADM5120_DEFS_H +#define _ADM5120_DEFS_H + +#define ADM5120_SDRAM0_BASE 0x00000000 +#define ADM5120_SDRAM1_BASE 0x01000000 +#define ADM5120_SRAM1_BASE 0x10000000 +#define ADM5120_MPMC_BASE 0x11000000 +#define ADM5120_USBC_BASE 0x11200000 +#define ADM5120_PCIMEM_BASE 0x11400000 +#define ADM5120_PCIIO_BASE 0x11500000 +#define ADM5120_PCICFG_ADDR 0x115FFFF0 +#define ADM5120_PCICFG_DATA 0x115FFFF8 +#define ADM5120_SWITCH_BASE 0x12000000 +#define ADM5120_INTC_BASE 0x12200000 +#define ADM5120_UART0_BASE 0x12600000 +#define ADM5120_UART1_BASE 0x12800000 +#define ADM5120_SRAM0_BASE 0x1FC00000 + +#define ADM5120_MPMC_SIZE 0x1000 +#define ADM5120_USBC_SIZE 0x84 +#define ADM5120_PCIMEM_SIZE (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE) +#define ADM5120_PCIIO_SIZE (ADM5120_PCICFG_ADDR - ADM5120_PCIIO_BASE) +#define ADM5120_PCICFG_SIZE 0x10 +#define ADM5120_SWITCH_SIZE 0x114 +#define ADM5120_INTC_SIZE 0x28 +#define ADM5120_UART_SIZE 0x20 + +#define ADM5120_CLK_175 175000000 +#define ADM5120_CLK_200 200000000 +#define ADM5120_CLK_225 225000000 +#define ADM5120_CLK_250 250000000 + +#define ADM5120_UART_CLOCK 62500000 + +#endif /* _ADM5120_DEFS_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h new file mode 100644 index 0000000000..b8b9c5d475 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h @@ -0,0 +1,92 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_INFO_H +#define _ADM5120_INFO_H + +#include + +extern unsigned int adm5120_prom_type; +#define ADM5120_PROM_GENERIC 0 +#define ADM5120_PROM_CFE 1 +#define ADM5120_PROM_MYLOADER 2 +#define ADM5120_PROM_ROUTERBOOT 3 +#define ADM5120_PROM_BOOTBASE 4 +#define ADM5120_PROM_UBOOT 5 +#define ADM5120_PROM_LAST 5 + +extern unsigned int adm5120_product_code; +extern unsigned int adm5120_revision; +extern unsigned int adm5120_nand_boot; + +extern unsigned long adm5120_speed; +#define ADM5120_SPEED_175 175000000 +#define ADM5120_SPEED_200 200000000 +#define ADM5120_SPEED_225 225000000 +#define ADM5120_SPEED_250 250000000 + +extern unsigned int adm5120_package; +#define ADM5120_PACKAGE_PQFP 0 +#define ADM5120_PACKAGE_BGA 1 + +extern unsigned long adm5120_memsize; + +/* + * TODO:remove adm5120_eth* variables when the switch driver will be + * converted into a real platform driver + */ +extern unsigned int adm5120_eth_num_ports; +extern unsigned char adm5120_eth_macs[6][6]; +extern unsigned char adm5120_eth_vlans[6]; + +extern void adm5120_soc_init(void) __init; +extern void adm5120_mem_init(void) __init; +extern void adm5120_time_init(void) __init; +extern void adm5120_ndelay(u32 ns); + +extern void adm5120_restart(char *command); +extern void adm5120_halt(void); +extern void adm5120_power_off(void); + +extern void (*adm5120_board_reset)(void); + +static inline int adm5120_package_pqfp(void) +{ + return (adm5120_package == ADM5120_PACKAGE_PQFP); +} + +static inline int adm5120_package_bga(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_pci(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +static inline int adm5120_has_gmii(void) +{ + return (adm5120_package == ADM5120_PACKAGE_BGA); +} + +#endif /* _ADM5120_INFO_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h new file mode 100644 index 0000000000..4d75259514 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h @@ -0,0 +1,76 @@ +/* + * $Id$ + * + * ADM5120 interrupt controller definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in interrupt controller. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_INTC_H_ +#define _ADM5120_INTC_H_ + +/* + * INTC register offsets + */ +#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ +#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ +#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ +#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ +#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR +#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ +#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ +#define INTC_REG_IRQ_TEST_SOURCE 0x1C +#define INTC_REG_IRQ_SOURCE_SELECT 0x20 +#define INTC_REG_INT_LEVEL 0x24 + +/* + * INTC IRQ numbers + */ +#define INTC_IRQ_TIMER 0 /* built in timer */ +#define INTC_IRQ_UART0 1 /* built-in UART0 */ +#define INTC_IRQ_UART1 2 /* built-in UART1 */ +#define INTC_IRQ_USBC 3 /* USB Host Controller */ +#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ +#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ +#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ +#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ +#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ +#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ +#define INTC_IRQ_LAST INTC_IRQ_SWITCH +#define INTC_IRQ_COUNT 10 + +/* + * INTC register bits + */ +#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER ) +#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 ) +#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 ) +#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC ) +#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 ) +#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 ) +#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 ) +#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 ) +#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 ) +#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH ) +#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1) + +#endif /* _ADM5120_INTC_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h new file mode 100644 index 0000000000..1b9e219891 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h @@ -0,0 +1,55 @@ +/* + * $Id$ + * + * ADM5120 specific IRQ numbers + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ +#ifndef _ADM5120_IRQ_H_ +#define _ADM5120_IRQ_H_ + +#include + +#define MIPS_IRQ_HW0 2 +#define MIPS_IRQ_COUNTER 7 +#define MIPS_IRQ_COUNT 8 + +#define ADM5120_CPU_IRQ_BASE 0 +#define ADM5120_INTC_IRQ_BASE (ADM5120_CPU_IRQ_BASE+MIPS_IRQ_COUNT) +#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE+INTC_IRQ_COUNT) + +#define ADM5120_CPU_IRQ(x) (ADM5120_CPU_IRQ_BASE + (x)) +#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x)) + +#define ADM5120_IRQ_INTC ADM5120_CPU_IRQ(MIPS_IRQ_HW0) +#define ADM5120_IRQ_COUNTER ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER) + +#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER) +#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0) +#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1) +#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC) +#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2) +#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4) +#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0) +#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1) +#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2) +#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH) + +#endif diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h new file mode 100644 index 0000000000..c821150c69 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h @@ -0,0 +1,87 @@ +/* + * $Id$ + * + * ADM5120 MPMC (Multiport Memory Controller) register definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#ifndef _ADM5120_MPMC_H_ +#define _ADM5120_MPMC_H_ + +#define MPMC_REG_CTRL 0x0000 +#define MPMC_REG_STATUS 0x0004 +#define MPMC_REG_CONF 0x0008 +#define MPMC_REG_DC 0x0020 +#define MPMC_REG_DR 0x0024 +#define MPMC_REG_DRP 0x0030 + +#define MPMC_REG_DC0 0x0100 +#define MPMC_REG_DRC0 0x0104 +#define MPMC_REG_DC1 0x0120 +#define MPMC_REG_DRC1 0x0124 +#define MPMC_REG_DC2 0x0140 +#define MPMC_REG_DRC2 0x0144 +#define MPMC_REG_DC3 0x0160 +#define MPMC_REG_DRC3 0x0164 +#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */ +#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */ +#define MPMC_REG_SC2 0x0240 +#define MPMC_REG_SC3 0x0260 + +#define MPMC_CTRL_AM ( 1 << 1 ) + +/* Dynamic Control register bits */ +#define MPMC_DC_CE ( 1 << 0 ) +#define MPMC_DC_DMC ( 1 << 1 ) +#define MPMC_DC_SRR ( 1 << 2 ) +#define MPMC_DC_SI_SHIFT 7 +#define MPMC_DC_SI_MASK ( 3 << 7 ) +#define MPMC_DC_SI_NORMAL ( 0 << 7 ) +#define MPMC_DC_SI_MODE ( 1 << 7 ) +#define MPMC_DC_SI_PALL ( 2 << 7 ) +#define MPMC_DC_SI_NOP ( 3 << 7 ) + +#define SRAM_REG_CONF 0x00 +#define SRAM_REG_WWE 0x04 +#define SRAM_REG_WOE 0x08 +#define SRAM_REG_WRD 0x0C +#define SRAM_REG_WPG 0x10 +#define SRAM_REG_WWR 0x14 +#define SRAM_REG_WTR 0x18 + +/* Dynamic Configuration register bits */ +#define DC_BE (1 << 19) /* buffer enable */ +#define DC_RW_SHIFT 28 /* shift for number of rows */ +#define DC_RW_MASK 0x03 +#define DC_NB_SHIFT 26 /* shift for number of banks */ +#define DC_NB_MASK 0x01 +#define DC_CW_SHIFT 22 /* shift for number of columns */ +#define DC_CW_MASK 0x07 +#define DC_DW_SHIFT 7 /* shift for device width */ +#define DC_DW_MASK 0x03 + +/* Static Configuration register bits */ +#define SC_MW_MASK 0x03 /* memory width mask */ +#define SC_MW_8 0x00 /* 8 bit memory width */ +#define SC_MW_16 0x01 /* 16 bit memory width */ +#define SC_MW_32 0x02 /* 32 bit memory width */ + +#endif /* _ADM5120_MPMC_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h new file mode 100644 index 0000000000..81c76170f6 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h @@ -0,0 +1,85 @@ +/* + * $Id$ + * + * ADM5120 specific platform definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_PLATFORM_H_ +#define _ADM5120_PLATFORM_H_ + +#include +#include + +#include +#include +#include + +#include +#include + +struct adm5120_flash_platform_data { + void (*set_vpp)(struct map_info *, int); + void (*switch_bank)(unsigned); +#ifdef CONFIG_MTD_PARTITIONS + unsigned int nr_parts; + struct mtd_partition *parts; +#endif +}; + +struct adm5120_nand_platform_data { + /* TODO : not yet implemented */ +}; + +struct adm5120_switch_platform_data { + /* TODO: not yet implemented */ +}; + +struct adm5120_pci_irq { + u8 slot; + u8 func; + u8 pin; + unsigned irq; +}; + +struct adm5120_pci_platform_data { + unsigned int nr_irqs; + struct adm5120_pci_irq *irqs; +}; + +extern struct adm5120_flash_platform_data adm5120_flash0_data; +extern struct adm5120_flash_platform_data adm5120_flash1_data; +extern struct adm5120_nand_platform_data adm5120_nand_data; +extern struct adm5120_pci_platform_data adm5120_pci_data; +extern struct adm5120_switch_platform_data adm5120_switch_data; +extern struct amba_pl010_data adm5120_uart0_data; +extern struct amba_pl010_data adm5120_uart1_data; + +extern struct platform_device adm5120_flash0_device; +extern struct platform_device adm5120_flash1_device; +extern struct platform_device adm5120_nand_device; +extern struct platform_device adm5120_usbc_device; +extern struct platform_device adm5120_pci_device; +extern struct platform_device adm5120_switch_device; +extern struct amba_device adm5120_uart0_device; +extern struct amba_device adm5120_uart1_device; + + +#endif /* _ADM5120_PLATFORM_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h new file mode 100644 index 0000000000..eb06bfa602 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h @@ -0,0 +1,148 @@ +/* + * ADM5120 ethernet switch definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in Ethernet switch. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_SWITCH_H +#define _ADM5120_SWITCH_H + +#define BITMASK(len) ((1 << (len))-1) +#define ONEBIT(at) (1 << (at)) + +/* Switch register offsets */ +#define SWITCH_REG_CODE 0x0000 +#define SWITCH_REG_SOFT_RESET 0x0004 +#define SWITCH_REG_MEMCTRL 0x001C +#define SWITCH_REG_CPUP_CONF 0x0024 +#define SWITCH_REG_PORT_CONF0 0x0028 +#define SWITCH_REG_PORT_CONF1 0x002C +#define SWITCH_REG_PORT_CONF2 0x0030 +#define SWITCH_REG_VLAN_G1 0x0040 +#define SWITCH_REG_VLAN_G2 0x0044 +#define SWITCH_REG_SEND_TRIG 0x0048 +#define SWITCH_REG_MAC_WT0 0x0058 +#define SWITCH_REG_MAC_WT1 0x005C +#define SWITCH_REG_PHY_CNTL0 0x0068 +#define SWITCH_REG_PHY_CNTL1 0x006C +#define SWITCH_REG_PHY_CNTL2 0x007C +#define SWITCH_REG_PHY_CNTL3 0x0080 +#define SWITCH_REG_PRI_CNTL 0x0084 +#define SWITCH_REG_INT_STATUS 0x00B0 +#define SWITCH_REG_INT_MASK 0x00B4 +#define SWITCH_REG_GPIO_CONF0 0x00B8 +#define SWITCH_REG_GPIO_CONF2 0x00BC +#define SWITCH_REG_WDOG0 0x00C0 +#define SWITCH_REG_WDOG1 0x00C4 +#define SWITCH_REG_PHY_CNTL4 0x00A0 + +#define SWITCH_REG_SEND_HBADDR 0x00D0 +#define SWITCH_REG_SEND_LBADDR 0x00D4 +#define SWITCH_REG_RECV_HBADDR 0x00D8 +#define SWITCH_REG_RECV_LBADDR 0x00DC + +#define SWITCH_REG_TIMER_INT 0x00F0 +#define SWITCH_REG_TIMER 0x00F4 + +#define SWITCH_REG_PORT0_LED 0x0100 +#define SWITCH_REG_PORT1_LED 0x0104 +#define SWITCH_REG_PORT2_LED 0x0108 +#define SWITCH_REG_PORT3_LED 0x010C +#define SWITCH_REG_PORT4_LED 0x0110 + +/* CODE register bits */ +#define CODE_PC_MASK BITMASK(16) /* Product Code */ +#define CODE_REV_SHIFT 16 +#define CODE_REV_MASK BITMASK(4) /* Product Revision */ +#define CODE_CLKS_SHIFT 20 +#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ +#define CODE_CLKS_175 0 /* 175 MHz */ +#define CODE_CLKS_200 1 /* 200 MHz */ +#define CODE_CLKS_225 2 /* 225 MHz */ +#define CODE_CLKS_250 3 /* 250 MHz */ +#define CODE_NAB ONEBIT(24) /* NAND boot */ +#define CODE_PK_MASK BITMASK(1) /* Package type */ +#define CODE_PK_SHIFT 29 +#define CODE_PK_BGA 0 /* BGA package */ +#define CODE_PK_PQFP 1 /* PQFP package */ + +/* MEMCTRL register bits */ +#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */ +#define MEMCTRL_SDRS_4M 0x01 +#define MEMCTRL_SDRS_8M 0x02 +#define MEMCTRL_SDRS_16M 0x03 +#define MEMCTRL_SDRS_64M 0x04 +#define MEMCTRL_SDRS_128M 0x05 +#define MEMCTRL_SDR1_ENABLE ONEBIT(5) /* enable SDRAM bank 1 */ + +#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */ +#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */ +#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */ +#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */ +#define MEMCTRL_SRS_512K 0x01 /* 512KB*/ +#define MEMCTRL_SRS_1M 0x02 /* 1MB */ +#define MEMCTRL_SRS_2M 0x03 /* 2MB */ +#define MEMCTRL_SRS_4M 0x04 /* 4MB */ + +/* GPIO_CONF0 register bits */ +#define GPIO_CONF0_MASK BITMASK(8) +#define GPIO_CONF0_IM_SHIFT 0 +#define GPIO_CONF0_IV_SHIFT 8 +#define GPIO_CONF0_OE_SHIFT 16 +#define GPIO_CONF0_OV_SHIFT 24 +#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT) +#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT) +#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) +#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) + +/* TIMER_INT register bits */ +#define TIMER_INT_TOS ONEBIT(1) /* time-out status */ +#define TIMER_INT_TOM ONEBIT(16) /* mask time-out interrupt */ + +/* TIMER register bits */ +#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */ +#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */ +#define TIMER_TE ONEBIT(16) /* timer enable bit */ + +/* PORTx_LED register bits */ +#define LED_MODE_MASK BITMASK(4) +#define LED_MODE_INPUT 0 +#define LED_MODE_FLASH 1 +#define LED_MODE_OUT_HIGH 2 +#define LED_MODE_OUT_LOW 3 +#define LED_MODE_LINK 4 +#define LED_MODE_SPEED 5 +#define LED_MODE_DUPLEX 6 +#define LED_MODE_ACT 7 +#define LED_MODE_COLL 8 +#define LED_MODE_LINK_ACT 9 +#define LED_MODE_DUPLEX_COLL 10 +#define LED_MODE_10M_ACT 11 +#define LED_MODE_100M_ACT 12 +#define LED0_MODE_SHIFT 0 /* LED0 mode shift */ +#define LED1_MODE_SHIFT 4 /* LED1 mode shift */ +#define LED2_MODE_SHIFT 8 /* LED2 mode shift */ +#define LED0_IV_SHIFT 12 /* LED0 input value shift */ +#define LED1_IV_SHIFT 13 /* LED1 input value shift */ +#define LED2_IV_SHIFT 14 /* LED2 input value shift */ + +#endif /* _ADM5120_SWITCH_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h new file mode 100755 index 0000000000..89c48dee5a --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h @@ -0,0 +1,75 @@ +/* + * ADM5120 UART definitions + * + * This header file defines the hardware registers of the ADM5120 SoC + * built-in UARTs. + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ADM5120_UART_H_ +#define _ADM5120_UART_H_ + +#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1) + +#define UART_REG_DATA 0x00 +#define UART_REG_RSR 0x04 +#define UART_REG_ECR UART_REG_RSR +#define UART_REG_LCRH 0x08 +#define UART_REG_LCRM 0x0C +#define UART_REG_LCRL 0x10 +#define UART_REG_CTRL 0x14 +#define UART_REG_FLAG 0x18 + +/* Receive Status Register bits */ +#define UART_RSR_FE ( 1 << 0 ) +#define UART_RSR_PE ( 1 << 1 ) +#define UART_RSR_BE ( 1 << 2 ) +#define UART_RSR_OE ( 1 << 3 ) +#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE ) + +#define UART_ECR_ALL 0xFF + +/* Line Control High register bits */ +#define UART_LCRH_BRK ( 1 << 0 ) /* send break */ +#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */ +#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */ +#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */ +#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */ +#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ + +#define UART_LCRH_WLEN5 ( 0 << 5 ) +#define UART_LCRH_WLEN6 ( 1 << 5 ) +#define UART_LCRH_WLEN7 ( 2 << 5 ) +#define UART_LCRH_WLEN8 ( 3 << 5 ) + +/* Control register bits */ +#define UART_CTRL_EN ( 1 << 0 ) + +/* Flag register bits */ +#define UART_FLAG_CTS ( 1 << 0 ) +#define UART_FLAG_DSR ( 1 << 1 ) +#define UART_FLAG_DCD ( 1 << 2 ) +#define UART_FLAG_BUSY ( 1 << 3 ) +#define UART_FLAG_RXFE ( 1 << 4 ) +#define UART_FLAG_TXFF ( 1 << 5 ) +#define UART_FLAG_RXFF ( 1 << 6 ) +#define UART_FLAG_TXFE ( 1 << 7 ) + +#endif /* _ADM5120_UART_H_ */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h new file mode 100644 index 0000000000..503843db15 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h @@ -0,0 +1,56 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size definitions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_16 0x00000010 +#define SZ_256 0x00000100 +#define SZ_512 0x00000200 + +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h new file mode 100644 index 0000000000..6216b864f5 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h @@ -0,0 +1,89 @@ +/* + * $Id$ + * + * ADM5120 specific CPU feature overrides + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This file was derived from: include/asm-mips/cpu-features.h + * Copyright (C) 2003, 2004 Ralf Baechle + * Copyright (C) 2004 Maciej W. Rozycki + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ +#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H + +#ifdef CONFIG_ADM5120_CPU_OVERRIDES + +/* + * The ADM5120 SOC has a built-in MIPS 4Kc core. + */ +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_3k_cache 0 +#define cpu_has_4k_cache 1 +#define cpu_has_tx39_cache 0 +#define cpu_has_sb1_cache 0 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 1 +#define cpu_has_divec 1 +/* #define cpu_has_vce ? */ +/* #define cpu_has_cache_cdex_p ? */ +/* #define cpu_has_cache_cdex_s ? */ +#define cpu_has_prefetch 1 +/* #define cpu_has_mcheck ? */ +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 + +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 + +/* #define cpu_has_vtag_icache ? */ +/* #define cpu_has_dc_aliases ? */ +/* #define cpu_has_ic_fills_f_dc ? */ +/* #define cpu_has_pindexed_dcache ? */ + +/* #define cpu_icache_snoops_remote_store ? */ + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 + +/* #define cpu_has_nofpuex ? */ +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +/* #define cpu_has_inclusive_pcaches ? */ + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 + +#endif /* CONFIG_ADM5120_CPU_OVERRIDES */ + + +#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h new file mode 100644 index 0000000000..684d86cd41 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h @@ -0,0 +1,126 @@ +/* + * $Id$ + * + * ADM5120 GPIO wrappers for arch-neutral GPIO calls + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#ifndef _ADM5120_GPIO_H_ +#define _ADM5120_GPIO_H_ + +#include + +#define ADM5120_GPIO_PIN0 0 +#define ADM5120_GPIO_PIN1 1 +#define ADM5120_GPIO_PIN2 2 +#define ADM5120_GPIO_PIN3 3 +#define ADM5120_GPIO_PIN4 4 +#define ADM5120_GPIO_PIN5 5 +#define ADM5120_GPIO_PIN6 6 +#define ADM5120_GPIO_PIN7 7 +#define ADM5120_GPIO_P0L0 8 +#define ADM5120_GPIO_P0L1 9 +#define ADM5120_GPIO_P0L2 10 +#define ADM5120_GPIO_P1L0 11 +#define ADM5120_GPIO_P1L1 12 +#define ADM5120_GPIO_P1L2 13 +#define ADM5120_GPIO_P2L0 14 +#define ADM5120_GPIO_P2L1 15 +#define ADM5120_GPIO_P2L2 16 +#define ADM5120_GPIO_P3L0 17 +#define ADM5120_GPIO_P3L1 18 +#define ADM5120_GPIO_P3L2 19 +#define ADM5120_GPIO_P4L0 20 +#define ADM5120_GPIO_P4L1 21 +#define ADM5120_GPIO_P4L2 22 +#define ADM5120_GPIO_MAX 22 +#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1 + +#define ADM5120_GPIO_LOW 0 +#define ADM5120_GPIO_HIGH 1 + +#define ADM5120_GPIO_SWITCH 0x10 +#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH) +#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK) +#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED) +#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX) +#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT) +#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL) +#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT) +#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL) +#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT) +#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT) + +extern int adm5120_gpio_direction_input(unsigned gpio); +extern int adm5120_gpio_direction_output(unsigned gpio, int value); +extern int adm5120_gpio_get_value(unsigned gpio); +extern void adm5120_gpio_set_value(unsigned gpio, int value); +extern int adm5120_gpio_request(unsigned gpio, const char *label); +extern void adm5120_gpio_free(unsigned gpio); +extern int adm5120_gpio_to_irq(unsigned gpio); +extern int adm5120_irq_to_gpio(unsigned irq); + +/* + * Wrappers for the generic GPIO layer + */ +static inline int gpio_direction_input(unsigned gpio) +{ + return adm5120_gpio_direction_input(gpio); +} + +static inline int gpio_direction_output(unsigned gpio, int value) +{ + return adm5120_gpio_direction_output(gpio,value); +} + +static inline int gpio_get_value(unsigned gpio) +{ + return adm5120_gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + adm5120_gpio_set_value(gpio, value); +} + +static inline int gpio_request(unsigned gpio, const char *label) +{ + return adm5120_gpio_request(gpio, label); +} + +static inline void gpio_free(unsigned gpio) +{ + adm5120_gpio_free(gpio); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return adm5120_gpio_to_irq(gpio); +} + +static inline int irq_to_gpio(unsigned irq) +{ + return adm5120_irq_to_gpio(irq); +} + +#include /* cansleep wrappers */ + +#endif diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h new file mode 100644 index 0000000000..7d202361ac --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h @@ -0,0 +1,31 @@ +/* + * $Id$ + * + * Broadcom's CFE definitions + * + * Copyright (C) 2006,2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _PROM_CFE_H_ +#define _PROM_CFE_H_ + +extern int cfe_present(void) __init; +extern char *cfe_getenv(char *); + +#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h new file mode 100644 index 0000000000..2cfa103672 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h @@ -0,0 +1,31 @@ +/* + * $Id$ + * + * Generic prom definitions + * + * Copyright (C) 2006,2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _PROM_GENERIC_H_ +#define _PROM_GENERIC_H_ + +extern int generic_prom_present(void) __init; +extern char *generic_prom_getenv(char *); + +#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h new file mode 100644 index 0000000000..526de865c9 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h @@ -0,0 +1,191 @@ +/* + * $Id$ + * + * Compex's MyLoader specific definitions + * + * Copyright (C) 2006,2007 Gabor Juhos + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _MYLOADER_H_ +#define _MYLOADER_H_ + +/* + * Firmware file format: + * + *
+ * [] + * ... + * [] + * + * [] + * ... + * [] + * + * + */ + +/* Myloader specific magic numbers */ +#define MYLO_MAGIC_FIRMWARE 0x4C594D00 +#define MYLO_MAGIC_20021103 0x20021103 +#define MYLO_MAGIC_20021107 0x20021107 + +#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 +#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 +#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 + +/* + * Addresses of the data structures provided by MyLoader + */ +#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ +#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ +#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ +#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ + +/* Vendor ID's (seems to be same as the PCI vendor ID's) */ +#define VENID_COMPEX 0x11F6 + +/* Devices based on the ADM5120 */ +#define DEVID_COMPEX_NP27G 0x0078 +#define DEVID_COMPEX_NP28G 0x044C +#define DEVID_COMPEX_NP28GHS 0x044E +#define DEVID_COMPEX_WP54Gv1C 0x0514 +#define DEVID_COMPEX_WP54G 0x0515 +#define DEVID_COMPEX_WP54AG 0x0546 +#define DEVID_COMPEX_WPP54AG 0x0550 +#define DEVID_COMPEX_WPP54G 0x0555 + +/* Devices based on the IXP422 */ +#define DEVID_COMPEX_WP18 0x047E +#define DEVID_COMPEX_NP18A 0x0489 + +/* Other devices */ +#define DEVID_COMPEX_NP26G8M 0x03E8 +#define DEVID_COMPEX_NP26G16M 0x03E9 + +struct mylo_fw_header { + uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ + uint32_t crc; /* CRC of the whole firmware */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint16_t vid; /* vendor ID */ + uint16_t did; /* device ID */ + uint16_t svid; /* sub vendor ID */ + uint16_t sdid; /* sub device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; /* FIXME: firmware version high? */ + uint32_t fwlo; /* FIXME: firmware version low? */ + uint32_t flags; /* firmware flags */ +}; + +#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ +#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ + +struct mylo_fw_blockdesc { + uint32_t type; /* block type */ + uint32_t addr; /* relative address to flash start */ + uint32_t dlen; /* size of block data in bytes */ + uint32_t blen; /* total size of block in bytes */ +}; + +#define FW_DESC_TYPE_UNUSED 0 +#define FW_DESC_TYPE_USED 1 + +struct mylo_partition { + uint16_t flags; /* partition flags */ + uint16_t type; /* type of the partition */ + uint32_t addr; /* relative address of the partition from the + flash start */ + uint32_t size; /* size of the partition in bytes */ + uint32_t param; /* if this is the active partition, the + MyLoader load code to this address */ +}; + +#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, + * MyLoader loads firmware from here */ +#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ +#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ +#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM + * before decompression */ +#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ + +#define PARTITION_TYPE_FREE 0 +#define PARTITION_TYPE_USED 1 + +#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the + partition table */ + +struct mylo_partition_table { + uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ + uint32_t res0; /* unknown/unused */ + uint32_t res1; /* unknown/unused */ + uint32_t res2; /* unknown/unused */ + struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; +}; + +struct mylo_partition_header { + uint32_t len; /* length of the partition data */ + uint32_t crc; /* CRC value of the partition data */ +}; + +struct mylo_system_params { + uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t mylo_ver; + uint16_t vid; /* Vendor ID */ + uint16_t did; /* Device ID */ + uint16_t svid; /* Sub Vendor ID */ + uint16_t sdid; /* Sub Device ID */ + uint32_t rev; /* device revision */ + uint32_t fwhi; + uint32_t fwlo; + uint32_t tftp_addr; + uint32_t prog_start; + uint32_t flash_size; /* Size of boot FLASH in bytes */ + uint32_t dram_size; /* Size of onboard RAM in bytes */ +}; + + +struct mylo_eth_addr { + uint8_t mac[6]; + uint8_t csum[2]; +}; + +#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address + in the board parameters */ + +struct mylo_board_params { + uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ + uint32_t res0; + uint32_t res1; + uint32_t res2; + struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; +}; + +struct myloader_info { + u32 vid; + u32 did; + u32 svid; + u32 sdid; +}; + +extern struct myloader_info myloader_info; +extern int myloader_present(void) __init; + +#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h new file mode 100644 index 0000000000..3c0898b3de --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h @@ -0,0 +1,137 @@ +/* + * $Id$ + * + * Mikrotik's RouterBOOT definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ROUTERBOOT_H +#define _ROUTERBOOT_H + +#define RB_MAC_SIZE 6 +#define RB_MAX_MAC_COUNT 6 + +struct rb_bios_settings { + u32 hs_offs; /* hard settings offset */ + u32 hs_size; /* hard settings size */ + u32 fw_offs; /* firmware offset */ + u32 ss_offs; /* soft settings offset */ + u32 ss_size; /* soft settings size */ +}; + +struct rb_hard_settings { + char *name; /* board name */ + char *bios_ver; /* BIOS version */ + u32 mem_size; /* memory size in bytes */ + u32 mac_count; /* number of mac addresses */ + u8 macs[RB_MAC_SIZE][RB_MAX_MAC_COUNT]; /* mac addresses */ +}; + +/* + * Magic numbers + */ +#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ +#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ +#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ + +#define RB_ID_TERMINATOR 0 + +/* + * ID values for Hardware settings + */ +#define RB_ID_HARD_01 1 +#define RB_ID_HARD_02 2 +#define RB_ID_FLASH_INFO 3 +#define RB_ID_MAC_ADDRESS_PACK 4 +#define RB_ID_BOARD_NAME 5 +#define RB_ID_BIOS_VERSION 6 +#define RB_ID_HARD_07 7 +#define RB_ID_SDRAM_TIMINGS 8 +#define RB_ID_DEVICE_TIMINGS 9 +#define RB_ID_SOFTWARE_ID 10 +#define RB_ID_SERIAL_NUMBER 11 +#define RB_ID_HARD_12 12 +#define RB_ID_MEMORY_SIZE 13 +#define RB_ID_MAC_ADDRESS_COUNT 14 + +/* + * ID values for Software settings + */ +#define RB_ID_UART_SPEED 1 +#define RB_ID_BOOT_DELAY 2 +#define RB_ID_BOOT_DEVICE 3 +#define RB_ID_BOOT_KEY 4 +#define RB_ID_CPU_MODE 5 +#define RB_ID_FW_VERSION 6 +#define RB_ID_SOFT_07 7 +#define RB_ID_SOFT_08 8 +#define RB_ID_BOOT_PROTOCOL 9 +#define RB_ID_SOFT_10 10 +#define RB_ID_SOFT_11 11 + +/* + * UART_SPEED values + */ +#define RB_UART_SPEED_115200 0 +#define RB_UART_SPEED_57600 1 +#define RB_UART_SPEED_38400 2 +#define RB_UART_SPEED_19200 3 +#define RB_UART_SPEED_9600 4 +#define RB_UART_SPEED_4800 5 +#define RB_UART_SPEED_2400 6 +#define RB_UART_SPEED_1200 7 + +/* + * BOOT_DELAY values + */ +#define RB_BOOT_DELAY_0SEC 0 +#define RB_BOOT_DELAY_1SEC 1 +#define RB_BOOT_DELAY_2SEC 2 + +/* + * BOOT_DEVICE values + */ +#define RB_BOOT_DEVICE_ETHER 0 +#define RB_BOOT_DEVICE_NANDETH 1 +#define RB_BOOT_DEVICE_ETHONCE 2 +#define RB_BOOT_DEVICE_NANDONLY 3 + +/* + * BOOT_KEY values + */ +#define RB_BOOT_KEY_ANY 0 +#define RB_BOOT_KEY_DEL 1 + +/* + * CPU_MODE values + */ +#define RB_CPU_MODE_POWERSAVE 0 +#define RB_CPU_MODE_REGULAR 1 + +/* + * BOOT_PROTOCOL values + */ +#define RB_BOOT_PROTOCOL_BOOTP 0 +#define RB_BOOT_PROTOCOL_DHCP 1 + +extern int routerboot_present(void) __init; +extern char *routerboot_get_boardname(void); + +#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h new file mode 100644 index 0000000000..e9471b5ad4 --- /dev/null +++ b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h @@ -0,0 +1,98 @@ +/* + * $Id$ + * + * ZyNOS (ZyXEL's Networking OS) definitions + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + */ + +#ifndef _ZYNOS_H +#define _ZYNOS_H + +#define ZYNOS_NAME_LEN 32 +#define ZYNOS_FEAT_BYTES 22 +#define ZYNOS_MAC_LEN 6 + +struct zynos_board_info { + unsigned char vendor[ZYNOS_NAME_LEN]; + unsigned char product[ZYNOS_NAME_LEN]; + u32 bootext_addr; + u32 res0; + u16 board_id; + u8 res1[6]; + u8 feat_other[ZYNOS_FEAT_BYTES]; + u8 feat_main; + u8 res2; + u8 mac[ZYNOS_MAC_LEN]; + u8 country; + u8 dbgflag; +} __attribute__ ((packed)); + +/* + * Vendor IDs + */ +#define ZYNOS_VENDOR_ID_ZYXEL 0 +#define ZYNOS_VENDOR_ID_NETGEAR 1 +#define ZYNOS_VENDOR_ID_DLINK 2 +#define ZYNOS_VENDOR_ID_OTHER 3 +#define ZYNOS_VENDOR_ID_LUCENT 4 + +/* + * Vendor names + */ +#define ZYNOS_VENDOR_DLINK "D-Link" +#define ZYNOS_VENDOR_LUCENT "LUCENT" +#define ZYNOS_VENDOR_NETGEAR "NetGear" +#define ZYNOS_VENDOR_ZYXEL "ZyXEL" + +/* + * Board IDs (big-endian) + */ +#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ +#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ +#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ +#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ +#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ +#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ +#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ +#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ +#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ +#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ +#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ +#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ +#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ +#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ +#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ + +/* + * Some magic numbers (big-endian) + */ +#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ +#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ + +struct bootbase_info { + u16 vendor_id; + u16 board_id; + u8 mac[6]; +}; + +extern struct bootbase_info bootbase_info; +extern int bootbase_present(void) __init; + +#endif /* _ZYNOS_H */ diff --git a/target/linux/adm5120/files/include/linux/gpio_leds.h b/target/linux/adm5120/files/include/linux/gpio_leds.h new file mode 100644 index 0000000000..5e78217b5f --- /dev/null +++ b/target/linux/adm5120/files/include/linux/gpio_leds.h @@ -0,0 +1,37 @@ +/* + * $Id$ + * + * GPIO LEDs platform data structure + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the + * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + */ + +#ifndef _GPIO_LEDS_H_ +#define _GPIO_LEDS_H_ + +struct gpio_led_platform_data { + char *name; + char *trigger; + unsigned gpio; /* GPIO line number */ + int value_off; /* value to turn LED OFF */ + int value_on; /* value to turn LED ON */ +}; + +#endif /* _GPIO_LEDS_H__ */ diff --git a/target/linux/adm5120/image/Makefile b/target/linux/adm5120/image/Makefile new file mode 100644 index 0000000000..77b1c89754 --- /dev/null +++ b/target/linux/adm5120/image/Makefile @@ -0,0 +1,177 @@ +# +# Copyright (C) 2006,2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +IMGNAME = $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL) +LOADER_MAKE = $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) + +define Image/Build/Loader + $(LOADER_MAKE) LOADER=loader-$(1).$(2) LOADER_DATA="" \ + LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ + CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ + compile loader.$(2) +endef + +define Build/Clean + $(LOADER_MAKE) clean +endef + +define Image/Prepare + cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma +endef + +define trxalign/jffs2-128k +-a 0x20000 +endef +define trxalign/jffs2-64k +-a 0x10000 +endef +define trxalign/squashfs +-a 1024 +endef + +define Image/Build/TRX + $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(3) -f $(KDIR)/vmlinux.lzma \ + $(call trxalign/$(2)) -f $(KDIR)/root.$(2) +endef + +define Image/Build/TRXNoloader + $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(KDIR)/vmlinux.lzma \ + $(call trxalign/$(2)) -f $(KDIR)/root.$(2) +endef + +define Image/Build/Compex + $(call Image/Build/Loader,$(2),gz,0x80500000,0,y,$(2)) + $(call Image/Build/TRX,$(IMGNAME)-$(3)-$(2).trx,$(1),$(KDIR)/loader-$(2).gz) +endef + +define Image/Build/Edimax + $(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2)) + $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) + $(STAGING_DIR_HOST)/bin/mkcsysimg -B $(2) -d -w \ + -r $(KDIR)/loader-$(2).gz \ + -x $(IMGNAME)-$(3)-$(2).trx \ + $(IMGNAME)-$(3)-$(2).bin +endef + +define Image/Build/Infineon + $(call Image/Build/Loader,$(2),gz,0x80500000,0x6D8,y,$(2)) + $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) + dd if=$(KDIR)/loader-$(2).gz of=$(IMGNAME)-$(3)-$(2).img bs=64k conv=sync + cat $(IMGNAME)-$(3)-$(2).trx >>$(IMGNAME)-$(3)-$(2).img +endef + +define Image/Build/MyLoader + $(call Image/Build/Loader,$(2),gz,0x80500000,0) + $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) + $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) \ + -p0x20000:0x10000:ahp:0x80001000 \ + -p0x30000:0 \ + -b0x20000:0x10000:h:$(KDIR)/loader-$(2).gz \ + -b0x30000:0::$(IMGNAME)-$(3)-$(2).trx \ + $(IMGNAME)-$(3)-$(2).bin +endef + +define Image/cmdline/yaffs2 +root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit +endef + +define Image/Build/RouterBoard + $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux + $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) ' +endef + +define Image/Build/jffs2-64k + $(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1))) +ifeq ($(CONFIG_DEVEL),y) + $(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6524k,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6524kp,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6541k,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6541kp,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),ew-7207apg,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),ps-1205uwg,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),ps-3205u,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),ps-3205uwg,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6524wg,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Edimax,$(1),br-6524wp,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Infineon,$(1),easy-5120p-ata,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Infineon,$(1),easy-5120-rt,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Infineon,$(1),easy-5120-wvoip,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/Infineon,$(1),easy-83000,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/MyLoader,$(1),np27g,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/MyLoader,$(1),np28g,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/MyLoader,$(1),np28ghs,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/MyLoader,$(1),wp54g,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/MyLoader,$(1),wp54ag,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/MyLoader,$(1),wpp54g,$(patsubst jffs2-%,jffs2,$(1))) + $(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1))) +endif +endef + +define Image/Build/squashfs +$(call Image/Build/jffs2-64k,$(1)) +endef + +define Image/Build +$(call Image/Build/$(1),$(1)) +endef + +ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) + define Image/BuildKernel + $(call Image/Build/RouterBoard) + endef +endif + +define Image/Build/LZMAKernel + $(LOADER_MAKE) TARGET_DIR=$(BIN_DIR) \ + LOADER=openwrt-$(BOARD)-$(KERNEL)-ramfs-lzma-$(1).$(2) \ + LOADER_DATA=$(KDIR)/vmlinux.lzma \ + LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ + CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ + compile loader.$(2) +endef + +define Image/Build/LZMAKernel/Compex + $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0,y,$(1)) +endef + +define Image/Build/LZMAKernel/Generic + $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0) +endef + +define Image/Build/LZMAKernel/Admboot + $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1)) +endef + +define Image/Build/Initramfs/RouterBoard + $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf +endef + +define Image/Build/Initramfs + $(call Image/Build/Initramfs/RouterBoard) + $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin) +ifeq ($(CONFIG_DEVEL),y) + $(call Image/Build/LZMAKernel/Generic,generic,bin) + $(call Image/Build/LZMAKernel/Generic,np27g,bin) + $(call Image/Build/LZMAKernel/Generic,wp54g,bin) + $(call Image/Build/LZMAKernel/Admboot,br-6104k,gz) + $(call Image/Build/LZMAKernel/Admboot,easy-5120,gz) + $(call Image/Build/LZMAKernel/Admboot,easy-83000,gz) + $(call Image/Build/LZMAKernel/Admboot,cas-630,gz) + $(call Image/Build/LZMAKernel/Admboot,cas-670,gz) + $(call Image/Build/LZMAKernel/Admboot,cas-700,gz) + $(call Image/Build/LZMAKernel/Admboot,cas-771,gz) + $(call Image/Build/LZMAKernel/Admboot,cas-790,gz) + $(call Image/Build/LZMAKernel/Admboot,cas-861,gz) +endif +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/adm5120/image/lzma-loader/Makefile b/target/linux/adm5120/image/lzma-loader/Makefile new file mode 100644 index 0000000000..74866e765e --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/Makefile @@ -0,0 +1,63 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id$ + +include $(TOPDIR)/rules.mk + +LOADER := loader.bin +LOADER_NAME := $(basename $(notdir $(LOADER))) +LOADER_DATA := +TARGET_DIR := + +ifeq ($(TARGET_DIR),) +TARGET_DIR := $(KDIR) +endif + +LOADER_BIN := $(TARGET_DIR)/$(LOADER_NAME).bin +LOADER_GZ := $(TARGET_DIR)/$(LOADER_NAME).gz +LOADER_ELF := $(TARGET_DIR)/$(LOADER_NAME).elf + +LZMA_STARTUP_ORG:= 0 +LZMA_TEXT_START := 0x80300000 + +PKG_NAME := lzma-loader +PKG_BUILD_DIR := $(KDIR)/$(PKG_NAME) + +.PHONY : loader-compile loader.bin loader.elf loader.gz + +$(PKG_BUILD_DIR)/.prepared: + mkdir $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ + touch $@ + +loader-compile: $(PKG_BUILD_DIR)/.prepared + $(MAKE) -C $(PKG_BUILD_DIR) CROSS_COMPILE="$(TARGET_CROSS)" \ + LZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) \ + LZMA_TEXT_START=$(LZMA_TEXT_START) \ + LOADER_DATA=$(LOADER_DATA) \ + CONFIG_BOARD=$(CONFIG_BOARD) \ + CONFIG_PASS_KARGS=$(CONFIG_PASS_KARGS) \ + clean all + +loader.gz: $(PKG_BUILD_DIR)/loader.bin + gzip -nc9 $< > $(LOADER_GZ) + +loader.elf: $(PKG_BUILD_DIR)/loader.elf + $(CP) $< $(LOADER_ELF) + +loader.bin: $(PKG_BUILD_DIR)/loader.bin + $(CP) $< $(LOADER_BIN) + +download: +prepare: $(PKG_BUILD_DIR)/.prepared +compile: loader-compile + +install: + +clean: + rm -rf $(PKG_BUILD_DIR) + diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c new file mode 100644 index 0000000000..75a358a9ee --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.c @@ -0,0 +1,589 @@ +/* + LzmaDecode.c + LZMA Decoder (optimized for Speed version) + + LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this Code, expressly permits you to + statically or dynamically link your Code (or bind by name) to the + interfaces of this file without subjecting your linked Code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#include "LzmaDecode.h" + +#ifndef Byte +#define Byte unsigned char +#endif + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +#define RC_READ_BYTE (*Buffer++) + +#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \ + { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }} + +#ifdef _LZMA_IN_CB + +#define RC_TEST { if (Buffer == BufferLim) \ + { UInt32 size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) return result; \ + BufferLim = Buffer + size; if (size == 0) return LZMA_RESULT_DATA_ERROR; }} + +#define RC_INIT Buffer = BufferLim = 0; RC_INIT2 + +#else + +#define RC_TEST { if (Buffer == BufferLim) return LZMA_RESULT_DATA_ERROR; } + +#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2 + +#endif + +#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; } + +#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound) +#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits; +#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits; + +#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \ + { UpdateBit0(p); mi <<= 1; A0; } else \ + { UpdateBit1(p); mi = (mi + mi) + 1; A1; } + +#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;) + +#define RangeDecoderBitTreeDecode(probs, numLevels, res) \ + { int i = numLevels; res = 1; \ + do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \ + res -= (1 << numLevels); } + + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + + +#define kNumStates 12 +#define kNumLitStates 7 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +#ifdef _LZMA_OUT_READ + +typedef struct _LzmaVarState +{ + Byte *Buffer; + Byte *BufferLim; + UInt32 Range; + UInt32 Code; + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback; + #endif + Byte *Dictionary; + UInt32 DictionarySize; + UInt32 DictionaryPos; + UInt32 GlobalPos; + UInt32 Reps[4]; + int lc; + int lp; + int pb; + int State; + int RemainLen; + Byte TempDictionary[4]; +} LzmaVarState; + +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback + #else + unsigned char *inStream, UInt32 inSize + #endif + ) +{ + Byte *Buffer; + Byte *BufferLim; + UInt32 Range; + UInt32 Code; + LzmaVarState *vs = (LzmaVarState *)buffer; + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + UInt32 i; + if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + vs->Dictionary = dictionary; + vs->DictionarySize = dictionarySize; + vs->DictionaryPos = 0; + vs->GlobalPos = 0; + vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; + vs->lc = lc; + vs->lp = lp; + vs->pb = pb; + vs->State = 0; + vs->RemainLen = 0; + dictionary[dictionarySize - 1] = 0; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + + #ifdef _LZMA_IN_CB + RC_INIT; + #else + RC_INIT(inStream, inSize); + #endif + vs->Buffer = Buffer; + vs->BufferLim = BufferLim; + vs->Range = Range; + vs->Code = Code; + #ifdef _LZMA_IN_CB + vs->InCallback = InCallback; + #endif + + return LZMA_RESULT_OK; +} + +int LzmaDecode(unsigned char *buffer, + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + LzmaVarState *vs = (LzmaVarState *)buffer; + Byte *Buffer = vs->Buffer; + Byte *BufferLim = vs->BufferLim; + UInt32 Range = vs->Range; + UInt32 Code = vs->Code; + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback = vs->InCallback; + #endif + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + int state = vs->State; + Byte previousByte; + UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << (vs->pb)) - 1; + UInt32 literalPosMask = (1 << (vs->lp)) - 1; + int lc = vs->lc; + int len = vs->RemainLen; + UInt32 globalPos = vs->GlobalPos; + + Byte *dictionary = vs->Dictionary; + UInt32 dictionarySize = vs->DictionarySize; + UInt32 dictionaryPos = vs->DictionaryPos; + + Byte tempDictionary[4]; + if (dictionarySize == 0) + { + dictionary = tempDictionary; + dictionarySize = 1; + tempDictionary[0] = vs->TempDictionary[0]; + } + + if (len == -1) + { + *outSizeProcessed = 0; + return LZMA_RESULT_OK; + } + + while(len != 0 && nowPos < outSize) + { + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + len--; + } + if (dictionaryPos == 0) + previousByte = dictionary[dictionarySize - 1]; + else + previousByte = dictionary[dictionaryPos - 1]; +#else + +int LzmaDecode( + Byte *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + CProb *p = (CProb *)buffer; + + UInt32 i; + int state = 0; + Byte previousByte = 0; + UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << pb) - 1; + UInt32 literalPosMask = (1 << lp) - 1; + int len = 0; + + Byte *Buffer; + Byte *BufferLim; + UInt32 Range; + UInt32 Code; + + if (bufferSize < numProbs * sizeof(CProb)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + + + #ifdef _LZMA_IN_CB + RC_INIT; + #else + RC_INIT(inStream, inSize); + #endif +#endif + + *outSizeProcessed = 0; + while(nowPos < outSize) + { + CProb *prob; + UInt32 bound; + int posState = (int)( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & posStateMask); + + prob = p + IsMatch + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + int symbol = 1; + UpdateBit0(prob) + prob = p + Literal + (LZMA_LIT_SIZE * + ((( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & literalPosMask) << lc) + (previousByte >> (8 - lc)))); + + if (state >= kNumLitStates) + { + int matchByte; + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + matchByte = dictionary[pos]; + #else + matchByte = outStream[nowPos - rep0]; + #endif + // prob += 0x100; + do + { + int bit; + CProb *probLit; + matchByte <<= 1; + bit = (matchByte & 0x100); + probLit = prob + 0x100 + bit + symbol; + RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break) + } + while (symbol < 0x100); + // prob -= 0x100; + } + while (symbol < 0x100) + { + CProb *probLit = prob + symbol; + RC_GET_BIT(probLit, symbol) + } + previousByte = (Byte)symbol; + + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #endif + if (state < 4) state = 0; + else if (state < 10) state -= 3; + else state -= 6; + } + else + { + // int isItRep; + UpdateBit1(prob); + prob = p + IsRep + state; + IfBit0(prob) + { + UpdateBit0(prob); + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + state = state < kNumLitStates ? 0 : 3; + prob = p + LenCoder; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG0 + state; + IfBit0(prob) + { + UpdateBit0(prob); + prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState; + IfBit0(prob) + { + #ifdef _LZMA_OUT_READ + UInt32 pos; + #endif + UpdateBit0(prob); + if (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + == 0) + return LZMA_RESULT_DATA_ERROR; + state = state < kNumLitStates ? 9 : 11; + #ifdef _LZMA_OUT_READ + pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + continue; + } + else + { + UpdateBit1(prob); + } + } + else + { + UInt32 distance; + UpdateBit1(prob); + prob = p + IsRepG1 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep1; + } + else + { + UpdateBit1(prob); + prob = p + IsRepG2 + state; + IfBit0(prob) + { + UpdateBit0(prob); + distance = rep2; + } + else + { + UpdateBit1(prob); + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + state = state < kNumLitStates ? 8 : 11; + prob = p + RepLenCoder; + } + { + int numBits, offset; + CProb *probLen = prob + LenChoice; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenLow + (posState << kLenNumLowBits); + offset = 0; + numBits = kLenNumLowBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenChoice2; + IfBit0(probLen) + { + UpdateBit0(probLen); + probLen = prob + LenMid + (posState << kLenNumMidBits); + offset = kLenNumLowSymbols; + numBits = kLenNumMidBits; + } + else + { + UpdateBit1(probLen); + probLen = prob + LenHigh; + offset = kLenNumLowSymbols + kLenNumMidSymbols; + numBits = kLenNumHighBits; + } + } + RangeDecoderBitTreeDecode(probLen, numBits, len); + len += offset; + } + + if (state < 4) + { + int posSlot; + state += kNumLitStates; + prob = p + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits); + RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + rep0 = (2 | ((UInt32)posSlot & 1)); + if (posSlot < kEndPosModelIndex) + { + rep0 <<= numDirectBits; + prob = p + SpecPos + rep0 - posSlot - 1; + } + else + { + numDirectBits -= kNumAlignBits; + do + { + RC_NORMALIZE + Range >>= 1; + rep0 <<= 1; + if (Code >= Range) + { + Code -= Range; + rep0 |= 1; + } + } + while (--numDirectBits != 0); + prob = p + Align; + rep0 <<= kNumAlignBits; + numDirectBits = kNumAlignBits; + } + { + int i = 1; + int mi = 1; + do + { + CProb *prob3 = prob + mi; + RC_GET_BIT2(prob3, mi, ; , rep0 |= i); + i <<= 1; + } + while(--numDirectBits != 0); + } + } + else + rep0 = posSlot; + if (++rep0 == (UInt32)(0)) + { + /* it's for stream version */ + len = -1; + break; + } + } + + len += kMatchMinLen; + if (rep0 > nowPos + #ifdef _LZMA_OUT_READ + + globalPos || rep0 > dictionarySize + #endif + ) + return LZMA_RESULT_DATA_ERROR; + do + { + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + len--; + outStream[nowPos++] = previousByte; + } + while(len != 0 && nowPos < outSize); + } + } + RC_NORMALIZE; + + #ifdef _LZMA_OUT_READ + vs->Buffer = Buffer; + vs->BufferLim = BufferLim; + vs->Range = Range; + vs->Code = Code; + vs->DictionaryPos = dictionaryPos; + vs->GlobalPos = globalPos + nowPos; + vs->Reps[0] = rep0; + vs->Reps[1] = rep1; + vs->Reps[2] = rep2; + vs->Reps[3] = rep3; + vs->State = state; + vs->RemainLen = len; + vs->TempDictionary[0] = tempDictionary[0]; + #endif + + *outSizeProcessed = nowPos; + return LZMA_RESULT_OK; +} diff --git a/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h new file mode 100644 index 0000000000..53677350ae --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/LzmaDecode.h @@ -0,0 +1,100 @@ +/* + LzmaDecode.h + LZMA Decoder interface + + LZMA SDK 4.16 Copyright (c) 1999-2005 Igor Pavlov (2005-03-18) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#ifndef __LZMADECODE_H +#define __LZMADECODE_H + +/* #define _LZMA_IN_CB */ +/* Use callback for input data */ + +/* #define _LZMA_OUT_READ */ +/* Use read function for output data */ + +/* #define _LZMA_PROB32 */ +/* It can increase speed on some 32-bit CPUs, + but memory usage will be doubled in that case */ + +/* #define _LZMA_LOC_OPT */ +/* Enable local speed optimizations inside code */ + +#ifndef UInt32 +#ifdef _LZMA_UINT32_IS_ULONG +#define UInt32 unsigned long +#else +#define UInt32 unsigned int +#endif +#endif + +#ifdef _LZMA_PROB32 +#define CProb UInt32 +#else +#define CProb unsigned short +#endif + +#define LZMA_RESULT_OK 0 +#define LZMA_RESULT_DATA_ERROR 1 +#define LZMA_RESULT_NOT_ENOUGH_MEM 2 + +#ifdef _LZMA_IN_CB +typedef struct _ILzmaInCallback +{ + int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); +} ILzmaInCallback; +#endif + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +/* +bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) +bufferSize += 100 in case of _LZMA_OUT_READ +by default CProb is unsigned short, +but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) +*/ + +#ifdef _LZMA_OUT_READ +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + unsigned char *inStream, UInt32 inSize + #endif +); +#endif + +int LzmaDecode( + unsigned char *buffer, + #ifndef _LZMA_OUT_READ + UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed); + +#endif diff --git a/target/linux/adm5120/image/lzma-loader/src/Makefile b/target/linux/adm5120/image/lzma-loader/src/Makefile new file mode 100644 index 0000000000..a553b7fdef --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/Makefile @@ -0,0 +1,99 @@ +# +# Makefile for Broadcom BCM947XX boards +# +# Copyright 2001-2003, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# Copyright 2004 Manuel Novoa III +# Modified to support bzip'd kernels. +# Of course, it would be better to integrate bunzip capability into CFE. +# +# Copyright 2005 Oleg I. Vdovikin +# Cleaned up, modified for lzma support, removed from kernel +# +# Copyright 2007 Gabor Juhos +# Modified to support user defined entry point address. +# Added support for make targets with different names +# + +LOADADDR := 0x80001000 +LZMA_TEXT_START := 0x80500000 +LZMA_STARTUP_ORG:= 0 +LOADER_DATA := +CONFIG_PASS_KARGS := +CONFIG_BOARD := + +CC := $(CROSS_COMPILE)gcc +LD := $(CROSS_COMPILE)ld +OBJCOPY := $(CROSS_COMPILE)objcopy +OBJDUMP := $(CROSS_COMPILE)objdump + +BIN_FLAGS := -O binary -R .reginfo -R .note -R .comment -R .mdebug -S + +CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ + -ffunction-sections -pipe -mlong-calls -fno-common \ + -ffreestanding \ + -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap +CFLAGS += -DLOADADDR=$(LOADADDR) + +ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DLZMA_STARTUP_ORG=$(LZMA_STARTUP_ORG) + +LDFLAGS = -static --gc-sections -no-warn-mismatch +LDFLAGS += -e startup -T loader.lds -Ttext $(LZMA_TEXT_START) + +O_FORMAT = $(shell $(OBJDUMP) -i | head -2 | grep elf32) + +OBJECTS := head.o decompress.o board.o printf.o LzmaDecode.o + +ifneq ($(strip $(LOADER_DATA)),) +OBJECTS += data.o +CFLAGS += -DLZMA_WRAPPER=1 +else +CFLAGS += -D_LZMA_IN_CB +endif + +ifneq ($(strip $(CONFIG_PASS_KARGS)),) +CFLAGS += -DCONFIG_PASS_KARGS +endif + +BOARD_DEF := $(strip $(CONFIG_BOARD)) +BOARD_DEF := $(shell echo $(BOARD_DEF) | tr a-z A-Z | tr -d -) +ifneq ($(BOARD_DEF),) +CFLAGS += -DCONFIG_BOARD_$(BOARD_DEF) +endif + +all: loader.bin + +# Don't build dependencies, this may die if $(CC) isn't gcc +dep: + +install: + +%.o : %.c + $(CC) $(CFLAGS) -c -o $@ $< + +%.o : %.S + $(CC) $(ASFLAGS) -c -o $@ $< + +data.o: $(LOADER_DATA) + $(LD) -r -b binary --oformat $(O_FORMAT) -T lzma-data.lds -o $@ $< + +loader.bin: loader.elf + $(OBJCOPY) $(BIN_FLAGS) $< $@ + +loader.elf: $(OBJECTS) + $(LD) $(LDFLAGS) -o $@ $(OBJECTS) + +mrproper: clean + +clean: + rm -f *.elf *.bin *.o + + + diff --git a/target/linux/adm5120/image/lzma-loader/src/README b/target/linux/adm5120/image/lzma-loader/src/README new file mode 100644 index 0000000000..16649e9500 --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/README @@ -0,0 +1,55 @@ +/* + * LZMA compressed kernel decompressor for bcm947xx boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +The code is intended to decompress kernel, being compressed using lzma utility +build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory + +decompressor code expects that your .trx file consist of three partitions: + +1) decompressor itself (this is gziped code which pmon/cfe will extract and run +on boot-up instead of real kernel) +2) LZMA compressed kernel (both streamed and regular modes are supported now) +3) Root filesystem + +Please be sure to apply the following patch for use this new trx layout (it will +allow using both new and old trx files for root filesystem lookup code) + +--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 ++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 +@@ -221,7 +221,9 @@ + /* Try looking at TRX header for rootfs offset */ + if (le32_to_cpu(trx->magic) == TRX_MAGIC) { + bcm947xx_parts[1].offset = off; +- if (le32_to_cpu(trx->offsets[1]) > off) ++ if (le32_to_cpu(trx->offsets[2]) > off) ++ off = le32_to_cpu(trx->offsets[2]); ++ else if (le32_to_cpu(trx->offsets[1]) > off) + off = le32_to_cpu(trx->offsets[1]); + continue; + } + + +Revision history: + 0.02 Initial release + 0.03 Added Mineharu Takahara patch to pass actual + output size to decoder (stream mode compressed input is not + a requirement anymore) + 0.04 Reordered functions using lds script diff --git a/target/linux/adm5120/image/lzma-loader/src/board.c b/target/linux/adm5120/image/lzma-loader/src/board.c new file mode 100644 index 0000000000..22317f9683 --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/board.c @@ -0,0 +1,178 @@ +/* + * ADM5120 specific board support for LZMA decompressor + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include + +#define READREG(r) *(volatile unsigned int *)(r) +#define WRITEREG(r,v) *(volatile unsigned int *)(r) = v + +/* + * INTC definitions + */ +#define INTC_BASE 0xB2200000 + +/* INTC registers */ +#define INTC_REG_IRQ_DISABLE 0x0C + +/* + * UART definitions + */ +#define UART_BASE 0xB2600000 +/* UART registers */ +#define UART_REG_DATA 0x00 /* Data register */ +#define UART_REG_ECR 0x04 /* Error Clear register */ +#define UART_REG_LCRH 0x08 /* Line Control High register */ +#define UART_REG_LCRM 0x0C /* Line Control Middle register */ +#define UART_REG_LCRL 0x10 /* Line Control Low register */ +#define UART_REG_CTRL 0x14 /* Control register */ +#define UART_REG_FLAG 0x18 /* Flag register */ + +/* Control register bits */ +#define UART_CTRL_EN ( 1 << 0 ) /* UART enable */ + +/* Line Control High register bits */ +#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ + +/* Flag register bits */ +#define UART_FLAG_CTS ( 1 << 0 ) +#define UART_FLAG_DSR ( 1 << 1 ) +#define UART_FLAG_DCD ( 1 << 2 ) +#define UART_FLAG_BUSY ( 1 << 3 ) +#define UART_FLAG_RXFE ( 1 << 4 ) /* RX FIFO empty */ +#define UART_FLAG_TXFF ( 1 << 5 ) /* TX FIFO full */ +#define UART_FLAG_RXFF ( 1 << 6 ) /* RX FIFO full */ +#define UART_FLAG_TXFE ( 1 << 7 ) /* TX FIFO empty */ + +/* + * SWITCH definitions + */ +#define SWITCH_BASE 0xB2000000 + +#define SWITCH_REG_CPUP_CONF 0x0024 +#define SWITCH_REG_PORT_CONF0 0x0028 + +#define SWITCH_REG_GPIO_CONF0 0x00B8 +#define SWITCH_REG_GPIO_CONF2 0x00BC + +#define SWITCH_REG_PORT0_LED 0x0100 +#define SWITCH_REG_PORT1_LED 0x0104 +#define SWITCH_REG_PORT2_LED 0x0108 +#define SWITCH_REG_PORT3_LED 0x010C +#define SWITCH_REG_PORT4_LED 0x0110 + +#define SWITCH_PORTS_HW 0x3F /* Hardware Ports */ + +/* CPUP_CONF register bits */ +#define CPUP_CONF_DCPUP ( 1 << 0 ) /* Disable CPU port */ + +/* PORT_CONF0 register bits */ +#define PORT_CONF0_DP_SHIFT 0 /* disable port shift*/ + + +/* + * UART routines + */ + +#define UART_READ(r) READREG(UART_BASE+(r)) +#define UART_WRITE(r,v) WRITEREG(UART_BASE+(r),(v)) + +static void uart_init(void) +{ +#if 0 + unsigned int t; + + /* disable uart */ + UART_WRITE(UART_REG_CTRL, 0); + + /* keep current baud rate */ + t = UART_READ(UART_REG_LCRM); + UART_WRITE(UART_REG_LCRM, t); + t = UART_READ(UART_REG_LCRL); + UART_WRITE(UART_REG_LCRL, t); + + /* keep data, stop, and parity bits, but disable FIFO */ + t = UART_READ(UART_REG_LCRH); + t &= ~(UART_LCRH_FEN); + UART_WRITE(UART_REG_LCRH, t ); + + /* clear error bits */ + UART_WRITE(UART_REG_ECR, 0xFF); + + /* enable uart, and disable interrupts */ + UART_WRITE(UART_REG_CTRL, UART_CTRL_EN); +#endif +} + +/* + * INTC routines + */ + +#define INTC_READ(r) READREG(INTC_BASE+(r)) +#define INTC_WRITE(r,v) WRITEREG(INTC_BASE+(r),v) + +static void intc_init(void) +{ + INTC_WRITE(INTC_REG_IRQ_DISABLE, 0xFFFFFFFF); +} + +/* + * SWITCH routines + */ + +#define SWITCH_READ(r) READREG(SWITCH_BASE+(r)) +#define SWITCH_WRITE(r,v) WRITEREG(SWITCH_BASE+(r),v) + +static void switch_init(void) +{ + /* disable PHYS ports */ + SWITCH_WRITE(SWITCH_REG_PORT_CONF0, + (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT)); + + /* disable CPU port */ + SWITCH_WRITE(SWITCH_REG_CPUP_CONF, CPUP_CONF_DCPUP); + + /* disable GPIO lines */ + SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0); + SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0); + + /* disable LED lines */ + SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0); + SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0); + SWITCH_WRITE(SWITCH_REG_PORT2_LED, 0); + SWITCH_WRITE(SWITCH_REG_PORT3_LED, 0); + SWITCH_WRITE(SWITCH_REG_PORT4_LED, 0); +} + +void board_putc(int ch) +{ + while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); + + UART_WRITE(UART_REG_DATA, ch); + + while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0); +} + +void board_init(void) +{ + intc_init(); + switch_init(); + uart_init(); +} diff --git a/target/linux/adm5120/image/lzma-loader/src/config.h b/target/linux/adm5120/image/lzma-loader/src/config.h new file mode 100644 index 0000000000..310189c6d6 --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/config.h @@ -0,0 +1,119 @@ +#ifndef _CONFIG_H_ +#define _CONFIG_H_ + +#define FLASH_2M (2<<20) +#define FLASH_4M (4<<20) + +/* + * Cellvision/SparkLAN boards + */ + +#if defined(CONFIG_BOARD_CAS630) +# define CONFIG_BOARD_NAME "CAS-630" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_CAS670) +# define CONFIG_BOARD_NAME "CAS-670" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_CAS700) +# define CONFIG_BOARD_NAME "CAS-700" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_CAS790) +# define CONFIG_BOARD_NAME "CAS-790" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_CAS771) +# define CONFIG_BOARD_NAME "CAS-771" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_CAS861) +# define CONFIG_BOARD_NAME "CAS-861" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_NFS101U) +# define CONFIG_BOARD_NAME "NFS-101U" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_NFS202U) +# define CONFIG_BOARD_NAME "NFS-202U" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +/* + * Compex boards + */ +#if defined(CONFIG_BOARD_WP54GWRT) +# define CONFIG_BOARD_NAME "WP54G-WRT" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +/* + * Edimax boards + */ +#if defined(CONFIG_BOARD_BR6104K) +# define CONFIG_BOARD_NAME "BR-6104K" +# define CONFIG_FLASH_SIZE FLASH_2M +#endif + +#if defined(CONFIG_BOARD_BR6104KP) +# define CONFIG_BOARD_NAME "BR-6104KP" +# define CONFIG_FLASH_SIZE FLASH_2M +#endif + +/* + * Infineon boards + */ +#if defined(CONFIG_BOARD_EASY5120PATA) +# define CONFIG_BOARD_NAME "EASY 5120P-ATA" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_EASY5120RT) +# define CONFIG_BOARD_NAME "EASY 5120-RT" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_EASY5120WVOIP) +# define CONFIG_BOARD_NAME "EASY 5120-WVOIP" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_EASY83000) +# define CONFIG_BOARD_NAME "EASY 83000" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +/* + * ZyXEL boards + */ +#if defined(CONFIG_BOARD_P334WT) +# define CONFIG_BOARD_NAME "P-334WT" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +#if defined(CONFIG_BOARD_P335) +# define CONFIG_BOARD_NAME "P-335" +# define CONFIG_FLASH_SIZE FLASH_4M +#endif + +/* + * Default values + */ +#ifndef CONFIG_BOARD_NAME +# define CONFIG_BOARD_NAME "ADM5120" +#endif + +#ifndef CONFIG_FLASH_SIZE +# define CONFIG_FLASH_SIZE FLASH_2M +#endif + +#endif /* _CONFIG_H_ */ diff --git a/target/linux/adm5120/image/lzma-loader/src/decompress.c b/target/linux/adm5120/image/lzma-loader/src/decompress.c new file mode 100644 index 0000000000..9e2a04c994 --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/decompress.c @@ -0,0 +1,349 @@ +/* + * $Id$ + * + * LZMA compressed kernel decompressor for ADM5120 boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Please note, this was code based on the bunzip2 decompressor code + * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left + * is an idea and part of original vendor code + * + * + * 12-Mar-2005 Mineharu Takahara + * pass actual output size to decoder (stream mode + * compressed input is not a requirement anymore) + * + * 24-Apr-2005 Oleg I. Vdovikin + * reordered functions using lds script, removed forward decl + * + * 24-Mar-2007 Gabor Juhos + * pass original values of the a0,a1,a2,a3 registers to the kernel + * + * 19-May-2007 Gabor Juhos + * endiannes related cleanups + * add support for decompressing an embedded kernel + * + */ + +#include + +#include "config.h" +#include "printf.h" +#include "LzmaDecode.h" + +#define ADM5120_FLASH_START 0x1fc00000 /* Flash start */ +#define ADM5120_FLASH_END 0x1fe00000 /* Flash end */ + +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 + +#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + +#define cache_unroll(base,op) \ + __asm__ __volatile__( \ + ".set noreorder;\n" \ + ".set mips3;\n" \ + "cache %1, (%0);\n" \ + ".set mips0;\n" \ + ".set reorder\n" \ + : \ + : "r" (base), \ + "i" (op)); + +#ifdef LZMA_DEBUG +# define DBG(f, a...) printf(f, ## a) +#else +# define DBG(f, a...) do {} while (0) +#endif + +static __inline__ void blast_icache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Invalidate_I); + start += lsize; + } +} + +static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Writeback_Inv_D); + start += lsize; + } +} + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_ALIGN 0x1000 + +struct trx_header { + unsigned int magic; /* "HDR0" */ + unsigned int len; /* Length of file including header */ + unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ + unsigned int flag_version; /* 0:15 flags, 16:31 version */ + unsigned int offsets[3]; /* Offsets of partitions from start of header */ +}; + +struct env_var { + char *name; + char *value; +}; + +/* beyound the image end, size not known in advance */ +extern unsigned char workspace[]; +extern void board_init(void); + +typedef void (*kernel_entry)(unsigned long reg_a0, unsigned long reg_a1, + unsigned long reg_a2, unsigned long reg_a3); + +static int decompress_data(unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed); + +#ifdef CONFIG_PASS_KARGS +#define ENVV(n,v) {.name = (n), .value = (v)} +struct env_var env_vars[] = { + ENVV("board_name", CONFIG_BOARD_NAME), + ENVV(NULL, NULL) +}; +#endif + +static void halt(void) +{ + printf("\nSystem halted!\n"); + for(;;); +} + +#if LZMA_WRAPPER +extern unsigned char _lzma_data_start[]; +extern unsigned char _lzma_data_end[]; + +unsigned char *data; +unsigned long datalen; + +static __inline__ unsigned char get_byte(void) +{ + datalen--; + return *data++; +} + +static void decompress_init(void) +{ + data = _lzma_data_start; + datalen = _lzma_data_end - _lzma_data_start; +} + +static int decompress_data(unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + return LzmaDecode(buffer, bufferSize, lc, lp, pb, data, datalen, + outStream, outSize, outSizeProcessed); +} +#endif /* LZMA_WRAPPER */ + +#if !(LZMA_WRAPPER) + +#define FLASH_BANK_SIZE (2<<20) + +static unsigned char *flash_base = (unsigned char *) KSEG1ADDR(ADM5120_FLASH_START); +static unsigned long flash_ofs = 0; +static unsigned long flash_max = 0; +static unsigned long flash_ofs_mask = (FLASH_BANK_SIZE-1); + +static __inline__ unsigned char get_byte(void) +{ + return *(flash_base+flash_ofs++); +} + +static int lzma_read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) +{ + unsigned long len; + + if (flash_ofs >= flash_max) + return LZMA_RESULT_DATA_ERROR; + + len = flash_max-flash_ofs; + +#if (CONFIG_FLASH_SIZE > FLASH_BANK_SIZE) + if (flash_ofs < FLASH_BANK_SIZE) { + /* switch to bank 0 */ + DBG("lzma_read_byte: switch to bank 0\n"); + + if (len > FLASH_BANK_SIZE-flash_ofs) + len = FLASH_BANK_SIZE-flash_ofs; + } else { + /* switch to bank 1 */ + DBG("lzma_read_byte: switch to bank 1\n"); + } +#endif + DBG("lzma_read_byte: ofs=%08X, len=%08X\n", flash_ofs, len); + + *buffer = flash_base+(flash_ofs & flash_ofs_mask); + *bufferSize = len; + flash_ofs += len; + + return LZMA_RESULT_OK; +} + +static ILzmaInCallback lzma_callback = { + .Read = lzma_read_byte, +}; + +static __inline__ unsigned int read_le32(void *buf) +{ + unsigned char *p = buf; + + return ((unsigned int)p[0] + ((unsigned int)p[1] << 8) + + ((unsigned int)p[2] << 16) +((unsigned int)p[3] << 24)); +} + +static void decompress_init(void) +{ + struct trx_header *hdr = NULL; + unsigned long kofs,klen; + + printf("Looking for TRX header... "); + /* look for trx header, 32-bit data access */ + for (flash_ofs = 0; flash_ofs < FLASH_BANK_SIZE; flash_ofs += TRX_ALIGN) { + if (read_le32(&flash_base[flash_ofs]) == TRX_MAGIC) { + hdr = (struct trx_header *)&flash_base[flash_ofs]; + break; + } + } + + if (hdr == NULL) { + printf("not found!\n"); + /* no compressed kernel found, halting */ + halt(); + } + + /* compressed kernel is in the partition 0 or 1 */ + kofs = read_le32(&hdr->offsets[1]); + if (kofs == 0 || kofs > 65536) { + klen = kofs-read_le32(&hdr->offsets[0]); + kofs = read_le32(&hdr->offsets[0]); + } else { + klen = read_le32(&hdr->offsets[2]); + if (klen > kofs) + klen -= kofs; + else + klen = read_le32(&hdr->len)-kofs; + } + + printf("found at %08X, kernel:%08X len:%08X\n", flash_ofs, + kofs, klen); + + flash_ofs += kofs; + flash_max = flash_ofs+klen; +} + +static int decompress_data(unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + return LzmaDecode(buffer, bufferSize, lc, lp, pb, &lzma_callback, + outStream, outSize, outSizeProcessed); +} +#endif /* !(LZMA_WRAPPER) */ + +/* should be the first function */ +void decompress_entry(unsigned long reg_a0, unsigned long reg_a1, + unsigned long reg_a2, unsigned long reg_a3, + unsigned long icache_size, unsigned long icache_lsize, + unsigned long dcache_size, unsigned long dcache_lsize) +{ + unsigned int i; /* temp value */ + unsigned int lc; /* literal context bits */ + unsigned int lp; /* literal pos state bits */ + unsigned int pb; /* pos state bits */ + unsigned int osize; /* uncompressed size */ + int res; + + board_init(); + + printf("\n\nLZMA loader for " CONFIG_BOARD_NAME + ", Copyright (C) 2007 OpenWrt.org\n\n"); + + decompress_init(); + + /* lzma args */ + i = get_byte(); + lc = i % 9, i = i / 9; + lp = i % 5, pb = i / 5; + + /* skip rest of the LZMA coder property */ + for (i = 0; i < 4; i++) + get_byte(); + + /* read the lower half of uncompressed size in the header */ + osize = ((unsigned int)get_byte()) + + ((unsigned int)get_byte() << 8) + + ((unsigned int)get_byte() << 16) + + ((unsigned int)get_byte() << 24); + + /* skip rest of the header (upper half of uncompressed size) */ + for (i = 0; i < 4; i++) + get_byte(); + + printf("decompressing kernel... "); + + /* decompress kernel */ + res = decompress_data(workspace, ~0, lc, lp, pb, + (unsigned char *)LOADADDR, osize, &i); + + if (res != LZMA_RESULT_OK) { + printf("failed, "); + switch (res) { + case LZMA_RESULT_DATA_ERROR: + printf("data error!\n"); + break; + case LZMA_RESULT_NOT_ENOUGH_MEM: + printf("not enough memory!\n"); + break; + default: + printf("unknown error %d!\n", res); + } + halt(); + } else + printf("done!\n"); + + blast_dcache(dcache_size, dcache_lsize); + blast_icache(icache_size, icache_lsize); + + printf("launching kernel...\n\n"); + +#ifdef CONFIG_PASS_KARGS + reg_a0 = 0; + reg_a1 = 0; + reg_a2 = (unsigned long)env_vars; + reg_a3 = 0; +#endif + /* Jump to load address */ + ((kernel_entry) LOADADDR)(reg_a0, reg_a1, reg_a2, reg_a3); +} diff --git a/target/linux/adm5120/image/lzma-loader/src/head.S b/target/linux/adm5120/image/lzma-loader/src/head.S new file mode 100644 index 0000000000..ee8b3200cf --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/head.S @@ -0,0 +1,209 @@ +/* Copyright 2007 Gabor Juhos */ +/* keep original values of the a0,a1,a2,a3 registers */ +/* modifed to support user defined entry point address */ +/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ +/* cache manipulation adapted from Broadcom code */ +/* idea taken from original bunzip2 decompressor code */ +/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ +/* Licensed under the linux kernel's version of the GPL.*/ + +#include +#include + +#define KSEG0 0x80000000 + +#define C0_STATUS $12 +#define C0_CAUSE $13 +#define C0_CONFIG $16 +#define C0_WATCHLO $18 +#define C0_WATCHHI $19 +#define C0_TAGLO $28 +#define C0_TAGHI $29 + +#define CONF1_DA_SHIFT 7 /* D$ associativity */ +#define CONF1_DA_MASK 0x00000380 +#define CONF1_DA_BASE 1 +#define CONF1_DL_SHIFT 10 /* D$ line size */ +#define CONF1_DL_MASK 0x00001c00 +#define CONF1_DL_BASE 2 +#define CONF1_DS_SHIFT 13 /* D$ sets/way */ +#define CONF1_DS_MASK 0x0000e000 +#define CONF1_DS_BASE 64 +#define CONF1_IA_SHIFT 16 /* I$ associativity */ +#define CONF1_IA_MASK 0x00070000 +#define CONF1_IA_BASE 1 +#define CONF1_IL_SHIFT 19 /* I$ line size */ +#define CONF1_IL_MASK 0x00380000 +#define CONF1_IL_BASE 2 +#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ +#define CONF1_IS_MASK 0x01c00000 +#define CONF1_IS_BASE 64 + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + + .text + +#if (LZMA_STARTUP_ORG) + .set noreorder + + b startup + nop + + .org LZMA_STARTUP_ORG +#endif + +LEAF(startup) + .set noreorder + .set mips32 + + mtc0 zero, C0_WATCHLO # clear watch registers + mtc0 zero, C0_WATCHHI + + mtc0 zero, C0_CAUSE # clear before writing status register + + mfc0 t0, C0_STATUS # get status register + li t1, ~(0xFF01) + and t0, t1 # mask interrupts + mtc0 t0, C0_STATUS # set up status register + + move t1, ra # save return address + la t0, __reloc_label # get linked address of label + bal __reloc_label # branch and link to label to + nop # get actual address +__reloc_label: + subu t0, ra, t0 # get reloc_delta + move ra, t1 # restore return address + + beqz t0, __reloc_end # if delta is 0 we are in the right place + nop + + /* Copy our code to the right place */ + la t1, _code_start # get linked address of _code_start + la t2, _code_end # get linked address of _code_end + addu t0, t0, t1 # calculate actual address of _code_start + +__reloc_copy: + lw t3, 0(t0) + sw t3, 0(t1) + add t1, 4 + blt t1, t2, __reloc_copy + add t0, 4 + +__reloc_end: + + /* At this point we need to invalidate dcache and */ + /* icache before jumping to new code */ + +1: /* Get cache sizes */ + .set mips32 + mfc0 s0,C0_CONFIG,1 + .set mips0 + + li s1,CONF1_DL_MASK + and s1,s0 + beq s1,zero,nodc + nop + + srl s1,CONF1_DL_SHIFT + li t0,CONF1_DL_BASE + sll s1,t0,s1 /* s1 has D$ cache line size */ + + li s2,CONF1_DA_MASK + and s2,s0 + srl s2,CONF1_DA_SHIFT + addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ + + li t0,CONF1_DS_MASK + and t0,s0 + srl t0,CONF1_DS_SHIFT + li s3,CONF1_DS_BASE + sll s3,s3,t0 /* s3 has D$ sets per way */ + + multu s2,s3 /* sets/way * associativity */ + mflo t0 /* total cache lines */ + + multu s1,t0 /* D$ linesize * lines */ + mflo s2 /* s2 is now D$ size in bytes */ + + /* Initilize the D$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s2 /* + size of cache == end */ + + .set mips3 +1: cache Index_Writeback_Inv_D,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s1 + +nodc: + /* Now we get to do it all again for the I$ */ + + move s3,zero /* just in case there is no icache */ + move s4,zero + + li t0,CONF1_IL_MASK + and t0,s0 + beq t0,zero,noic + nop + + srl t0,CONF1_IL_SHIFT + li s3,CONF1_IL_BASE + sll s3,t0 /* s3 has I$ cache line size */ + + li t0,CONF1_IA_MASK + and t0,s0 + srl t0,CONF1_IA_SHIFT + addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ + + li t0,CONF1_IS_MASK + and t0,s0 + srl t0,CONF1_IS_SHIFT + li s5,CONF1_IS_BASE + sll s5,t0 /* s5 has I$ sets per way */ + + multu s4,s5 /* sets/way * associativity */ + mflo t0 /* s4 is now total cache lines */ + + multu s3,t0 /* I$ linesize * lines */ + mflo s4 /* s4 is cache size in bytes */ + + /* Initilize the I$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s4 /* + size of cache == end */ + + .set mips3 +1: cache Index_Invalidate_I,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s3 + +noic: + /* Setup new "C" stack */ + la sp, _stack + + addiu sp, -32 /* reserve stack for parameters */ +#if 0 + sw a0, 0(sp) + sw a1, 4(sp) + sw a2, 8(sp) + sw a3, 12(sp) +#endif + sw s3, 16(sp) /* icache line size */ + sw s4, 20(sp) /* icache size */ + sw s1, 24(sp) /* dcache line size */ + sw s2, 28(sp) /* dcache size */ + + /* jump to the decompressor routine */ + la t0, decompress_entry + jr t0 + nop + + .set reorder +END(startup) diff --git a/target/linux/adm5120/image/lzma-loader/src/loader.lds b/target/linux/adm5120/image/lzma-loader/src/loader.lds new file mode 100644 index 0000000000..bae70fb6ea --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/loader.lds @@ -0,0 +1,29 @@ +OUTPUT_ARCH(mips) +SECTIONS { + .text : { + _code_start = .; + *(.text) + *(.text.*) + *(.rodata) + *(.rodata.*) + . = ALIGN(16); + *(.data.lzma) + } + + .data : { + *(.data) + *(.data.*) + } + _code_end = .; + + .bss : { + *(.bss) + *(.bss.*) + } + + . = ALIGN(16); + . = . + 8192; + _stack = .; + + workspace = .; +} diff --git a/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds new file mode 100644 index 0000000000..abf756ba13 --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/lzma-data.lds @@ -0,0 +1,8 @@ +OUTPUT_ARCH(mips) +SECTIONS { + .data.lzma : { + _lzma_data_start = .; + *(.data) + _lzma_data_end = .; + } +} diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.c b/target/linux/adm5120/image/lzma-loader/src/printf.c new file mode 100644 index 0000000000..7bb5a86e18 --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/printf.c @@ -0,0 +1,350 @@ +/* + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include "printf.h" + +extern void board_putc(int ch); + +/* this is the maximum width for a variable */ +#define LP_MAX_BUF 256 + +/* macros */ +#define IsDigit(x) ( ((x) >= '0') && ((x) <= '9') ) +#define Ctod(x) ( (x) - '0') + +/* forward declaration */ +static int PrintChar(char *, char, int, int); +static int PrintString(char *, char *, int, int); +static int PrintNum(char *, unsigned long, int, int, int, int, char, int); + +/* private variable */ +static const char theFatalMsg[] = "fatal error in lp_Print!"; + +/* -*- + * A low level printf() function. + */ +static void +lp_Print(void (*output)(void *, char *, int), + void * arg, + char *fmt, + va_list ap) +{ + +#define OUTPUT(arg, s, l) \ + { if (((l) < 0) || ((l) > LP_MAX_BUF)) { \ + (*output)(arg, (char*)theFatalMsg, sizeof(theFatalMsg)-1); for(;;); \ + } else { \ + (*output)(arg, s, l); \ + } \ + } + + char buf[LP_MAX_BUF]; + + char c; + char *s; + long int num; + + int longFlag; + int negFlag; + int width; + int prec; + int ladjust; + char padc; + + int length; + + for(;;) { + { + /* scan for the next '%' */ + char *fmtStart = fmt; + while ( (*fmt != '\0') && (*fmt != '%')) { + fmt ++; + } + + /* flush the string found so far */ + OUTPUT(arg, fmtStart, fmt-fmtStart); + + /* are we hitting the end? */ + if (*fmt == '\0') break; + } + + /* we found a '%' */ + fmt ++; + + /* check for long */ + if (*fmt == 'l') { + longFlag = 1; + fmt ++; + } else { + longFlag = 0; + } + + /* check for other prefixes */ + width = 0; + prec = -1; + ladjust = 0; + padc = ' '; + + if (*fmt == '-') { + ladjust = 1; + fmt ++; + } + + if (*fmt == '0') { + padc = '0'; + fmt++; + } + + if (IsDigit(*fmt)) { + while (IsDigit(*fmt)) { + width = 10 * width + Ctod(*fmt++); + } + } + + if (*fmt == '.') { + fmt ++; + if (IsDigit(*fmt)) { + prec = 0; + while (IsDigit(*fmt)) { + prec = prec*10 + Ctod(*fmt++); + } + } + } + + + /* check format flag */ + negFlag = 0; + switch (*fmt) { + case 'b': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 2, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'd': + case 'D': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + if (num < 0) { + num = - num; + negFlag = 1; + } + length = PrintNum(buf, num, 10, negFlag, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'o': + case 'O': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 8, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'u': + case 'U': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 10, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'x': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 0); + OUTPUT(arg, buf, length); + break; + + case 'X': + if (longFlag) { + num = va_arg(ap, long int); + } else { + num = va_arg(ap, int); + } + length = PrintNum(buf, num, 16, 0, width, ladjust, padc, 1); + OUTPUT(arg, buf, length); + break; + + case 'c': + c = (char)va_arg(ap, int); + length = PrintChar(buf, c, width, ladjust); + OUTPUT(arg, buf, length); + break; + + case 's': + s = (char*)va_arg(ap, char *); + length = PrintString(buf, s, width, ladjust); + OUTPUT(arg, buf, length); + break; + + case '\0': + fmt --; + break; + + default: + /* output this char as it is */ + OUTPUT(arg, fmt, 1); + } /* switch (*fmt) */ + + fmt ++; + } /* for(;;) */ + + /* special termination call */ + OUTPUT(arg, "\0", 1); +} + + +/* --------------- local help functions --------------------- */ +static int +PrintChar(char * buf, char c, int length, int ladjust) +{ + int i; + + if (length < 1) length = 1; + if (ladjust) { + *buf = c; + for (i=1; i< length; i++) buf[i] = ' '; + } else { + for (i=0; i< length-1; i++) buf[i] = ' '; + buf[length - 1] = c; + } + return length; +} + +static int +PrintString(char * buf, char* s, int length, int ladjust) +{ + int i; + int len=0; + char* s1 = s; + while (*s1++) len++; + if (length < len) length = len; + + if (ladjust) { + for (i=0; i< len; i++) buf[i] = s[i]; + for (i=len; i< length; i++) buf[i] = ' '; + } else { + for (i=0; i< length-len; i++) buf[i] = ' '; + for (i=length-len; i < length; i++) buf[i] = s[i-length+len]; + } + return length; +} + +static int +PrintNum(char * buf, unsigned long u, int base, int negFlag, + int length, int ladjust, char padc, int upcase) +{ + /* algorithm : + * 1. prints the number from left to right in reverse form. + * 2. fill the remaining spaces with padc if length is longer than + * the actual length + * TRICKY : if left adjusted, no "0" padding. + * if negtive, insert "0" padding between "0" and number. + * 3. if (!ladjust) we reverse the whole string including paddings + * 4. otherwise we only reverse the actual string representing the num. + */ + + int actualLength =0; + char *p = buf; + int i; + + do { + int tmp = u %base; + if (tmp <= 9) { + *p++ = '0' + tmp; + } else if (upcase) { + *p++ = 'A' + tmp - 10; + } else { + *p++ = 'a' + tmp - 10; + } + u /= base; + } while (u != 0); + + if (negFlag) { + *p++ = '-'; + } + + /* figure out actual length and adjust the maximum length */ + actualLength = p - buf; + if (length < actualLength) length = actualLength; + + /* add padding */ + if (ladjust) { + padc = ' '; + } + if (negFlag && !ladjust && (padc == '0')) { + for (i = actualLength-1; i< length-1; i++) buf[i] = padc; + buf[length -1] = '-'; + } else { + for (i = actualLength; i< length; i++) buf[i] = padc; + } + + + /* prepare to reverse the string */ + { + int begin = 0; + int end; + if (ladjust) { + end = actualLength - 1; + } else { + end = length -1; + } + + while (end > begin) { + char tmp = buf[begin]; + buf[begin] = buf[end]; + buf[end] = tmp; + begin ++; + end --; + } + } + + /* adjust the string pointer */ + return length; +} + +static void printf_output(void *arg, char *s, int l) +{ + int i; + + // special termination call + if ((l==1) && (s[0] == '\0')) return; + + for (i=0; i< l; i++) { + board_putc(s[i]); + if (s[i] == '\n') board_putc('\r'); + } +} + +void printf(char *fmt, ...) +{ + va_list ap; + va_start(ap, fmt); + lp_Print(printf_output, 0, fmt, ap); + va_end(ap); +} diff --git a/target/linux/adm5120/image/lzma-loader/src/printf.h b/target/linux/adm5120/image/lzma-loader/src/printf.h new file mode 100644 index 0000000000..9b1c1df232 --- /dev/null +++ b/target/linux/adm5120/image/lzma-loader/src/printf.h @@ -0,0 +1,18 @@ +/* + * Copyright (C) 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef _printf_h_ +#define _printf_h_ + +#include +void printf(char *fmt, ...); + +#endif /* _printf_h_ */ diff --git a/target/linux/adm5120/patches-2.6.22/001-adm5120.patch b/target/linux/adm5120/patches-2.6.22/001-adm5120.patch new file mode 100644 index 0000000000..14cb612b08 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/001-adm5120.patch @@ -0,0 +1,114 @@ +Index: linux-2.6.22.1/arch/mips/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/arch/mips/Kconfig ++++ linux-2.6.22.1/arch/mips/Kconfig +@@ -15,6 +15,18 @@ choice + prompt "System type" + default SGI_IP22 + ++config MIPS_ADM5120 ++ bool "Support for ADM5120 SoC" ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select GENERIC_GPIO ++ + config MACH_ALCHEMY + bool "Alchemy processor based machines" + +@@ -658,6 +670,7 @@ config TOSHIBA_RBTX4938 + + endchoice + ++source "arch/mips/adm5120/Kconfig" + source "arch/mips/au1000/Kconfig" + source "arch/mips/ddb5xxx/Kconfig" + source "arch/mips/gt64120/ev64120/Kconfig" +Index: linux-2.6.22.1/arch/mips/Makefile +=================================================================== +--- linux-2.6.22.1.orig/arch/mips/Makefile ++++ linux-2.6.22.1/arch/mips/Makefile +@@ -165,6 +165,16 @@ cflags-$(CONFIG_MACH_JAZZ) += -Iinclude/ + load-$(CONFIG_MACH_JAZZ) += 0xffffffff80080000 + + # ++# ADMtek 5120 ++# ++ ++libs-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/prom/ ++core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/ ++core-$(CONFIG_MIPS_ADM5120) += arch/mips/adm5120/boards/ ++cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120 ++load-$(CONFIG_MIPS_ADM5120) += 0xffffffff80001000 ++ ++# + # Common Alchemy Au1x00 stuff + # + core-$(CONFIG_SOC_AU1X00) += arch/mips/au1000/common/ +Index: linux-2.6.22.1/include/asm-mips/bootinfo.h +=================================================================== +--- linux-2.6.22.1.orig/include/asm-mips/bootinfo.h ++++ linux-2.6.22.1/include/asm-mips/bootinfo.h +@@ -213,6 +213,57 @@ + #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ + #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ + ++/* ++ * Valid machtype for group ADMtek ADM5120 ++ */ ++#define MACH_GROUP_ADM5120 26 ++#define MACH_ADM5120_GENERIC 0 /* Generic board */ ++#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ ++#define MACH_ADM5120_WP54G 2 /* Compex WP54G */ ++#define MACH_ADM5120_WP54AG 3 /* Compex WP54AG */ ++#define MACH_ADM5120_WPP54G 4 /* Compex WPP54G */ ++#define MACH_ADM5120_WPP54AG 5 /* Compex WPP54AG */ ++#define MACH_ADM5120_NP28G 6 /* Compex NP28G */ ++#define MACH_ADM5120_NP28GHS 7 /* Compex NP28G HotSpot */ ++#define MACH_ADM5120_NP27G 8 /* Compex NP27G */ ++#define MACH_ADM5120_WP54Gv1C 9 /* Compex WP54G version 1C */ ++#define MACH_ADM5120_RB_111 10 /* Mikrotik RouterBOARD 111 */ ++#define MACH_ADM5120_RB_112 11 /* Mikrotik RouterBOARD 112 */ ++#define MACH_ADM5120_RB_133 12 /* Mikrotik RouterBOARD 133 */ ++#define MACH_ADM5120_RB_133C 13 /* Mikrotik RouterBOARD 133c */ ++#define MACH_ADM5120_RB_150 14 /* Mikrotik RouterBOARD 150 */ ++#define MACH_ADM5120_RB_153 15 /* Mikrotik RouterBOARD 153 */ ++#define MACH_ADM5120_HS100 16 /* ZyXEL HomeSafe 100/100W */ ++#define MACH_ADM5120_P334 17 /* ZyXEL Prestige 334 */ ++#define MACH_ADM5120_P334U 18 /* ZyXEL Prestige 334U */ ++#define MACH_ADM5120_P334W 19 /* ZyXEL Prestige 334W */ ++#define MACH_ADM5120_P334WH 20 /* ZyXEL Prestige 334WH */ ++#define MACH_ADM5120_P334WHD 21 /* ZyXEL Prestige 334WHD */ ++#define MACH_ADM5120_P334WT 22 /* ZyXEL Prestige 334WT */ ++#define MACH_ADM5120_P335 23 /* ZyXEL Prestige 335/335WT */ ++#define MACH_ADM5120_P335PLUS 24 /* ZyXEL Prestige 335Plus */ ++#define MACH_ADM5120_P335U 25 /* ZyXEL Prestige 335U */ ++#define MACH_ADM5120_ES2108 26 /* ZyXEL Ethernet Switch 2108 */ ++#define MACH_ADM5120_ES2108F 27 /* ZyXEL Ethernet Switch 2108-F */ ++#define MACH_ADM5120_ES2108G 28 /* ZyXEL Ethernet Switch 2108-G */ ++#define MACH_ADM5120_ES2108LC 29 /* ZyXEL Ethernet Switch 2108-LC */ ++#define MACH_ADM5120_ES2108PWR 30 /* ZyXEL Ethernet Switch 2108-PWR */ ++#define MACH_ADM5120_ES2024A 31 /* ZyXEL Ethernet Switch 2024A */ ++#define MACH_ADM5120_ES2024PWR 32 /* ZyXEL Ethernet Switch 2024PWR */ ++#define MACH_ADM5120_CAS630 33 /* Cellvision CAS-630/630W */ ++#define MACH_ADM5120_CAS670 34 /* Cellvision CAS-670/670W */ ++#define MACH_ADM5120_CAS700 36 /* Cellvision CAS-700/700W */ ++#define MACH_ADM5120_CAS771 37 /* Cellvision CAS-771/771W */ ++#define MACH_ADM5120_CAS790 38 /* Cellvision CAS-790 */ ++#define MACH_ADM5120_CAS861 39 /* Cellvision CAS-861/861W */ ++#define MACH_ADM5120_NFS101U 40 /* Cellvision NFS-101U/101WU */ ++#define MACH_ADM5120_NFS202U 41 /* Cellvision NFS-202U/202WU */ ++#define MACH_ADM5120_EASY5120PATA 42 /* Infineon EASY 5120P-ATA */ ++#define MACH_ADM5120_EASY5120RT 43 /* Infineon EASY 5120-RT */ ++#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */ ++#define MACH_ADM5120_EASY83000 45 /* Infineon EASY-83000 */ ++#define MACH_ADM5120_BR6104K 46 /* Edimax BR-6104K */ ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); diff --git a/target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch b/target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch new file mode 100644 index 0000000000..e2f21bfc4c --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/002-adm5120_flash.patch @@ -0,0 +1,26 @@ +Index: linux-2.6.22.1/drivers/mtd/maps/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/maps/Kconfig ++++ linux-2.6.22.1/drivers/mtd/maps/Kconfig +@@ -620,5 +620,9 @@ config MTD_PLATRAM + + This selection automatically selects the map_ram driver. + ++config MTD_ADM5120 ++ tristate "Map driver for ADM5120 based boards" ++ depends on MIPS_ADM5120 ++ + endmenu + +Index: linux-2.6.22.1/drivers/mtd/maps/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/maps/Makefile ++++ linux-2.6.22.1/drivers/mtd/maps/Makefile +@@ -47,6 +47,7 @@ obj-$(CONFIG_MTD_OCELOT) += ocelot.o + obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o + obj-$(CONFIG_MTD_PCI) += pci.o + obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o ++obj-$(CONFIG_MTD_ADM5120) += adm5120-flash.o + obj-$(CONFIG_MTD_LASAT) += lasat.o + obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o + obj-$(CONFIG_MTD_EDB7312) += edb7312.o diff --git a/target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch b/target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch new file mode 100644 index 0000000000..ff8a9bbc29 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/003-adm5120_switch.patch @@ -0,0 +1,27 @@ +Index: linux-2.6.22.1/drivers/net/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/net/Kconfig ++++ linux-2.6.22.1/drivers/net/Kconfig +@@ -574,6 +574,10 @@ config MIPS_AU1X00_ENET + If you have an Alchemy Semi AU1X00 based system + say Y. Otherwise, say N. + ++config MIPS_ADM5120_ENET ++ tristate "MIPS ADM5120 Ethernet switch support" ++ depends on NET_ETHERNET && MIPS_ADM5120 ++ + config NET_SB1250_MAC + tristate "SB1250 Ethernet support" + depends on NET_ETHERNET && SIBYTE_SB1xxx_SOC +Index: linux-2.6.22.1/drivers/net/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/net/Makefile ++++ linux-2.6.22.1/drivers/net/Makefile +@@ -165,6 +165,7 @@ obj-$(CONFIG_SC92031) += sc92031.o + # This is also a 82596 and should probably be merged + obj-$(CONFIG_LP486E) += lp486e.o + ++obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o + obj-$(CONFIG_ETH16I) += eth16i.o + obj-$(CONFIG_ZORRO8390) += zorro8390.o + obj-$(CONFIG_HPLANCE) += hplance.o 7990.o diff --git a/target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch b/target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch new file mode 100644 index 0000000000..79915e0281 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/004-adm5120_nand.patch @@ -0,0 +1,29 @@ +Index: linux-2.6.22.1/drivers/mtd/nand/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/nand/Kconfig ++++ linux-2.6.22.1/drivers/mtd/nand/Kconfig +@@ -81,6 +81,12 @@ config MTD_NAND_TS7250 + help + Support for NAND flash on Technologic Systems TS-7250 platform. + ++config MTD_NAND_RB100 ++ tristate "NAND Flash device on RB100 board" ++ depends on MTD_NAND ++ help ++ Support for NAND flash on RB100 platform. ++ + config MTD_NAND_IDS + tristate + +Index: linux-2.6.22.1/drivers/mtd/nand/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/nand/Makefile ++++ linux-2.6.22.1/drivers/mtd/nand/Makefile +@@ -10,6 +10,7 @@ obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nan + obj-$(CONFIG_MTD_NAND_SPIA) += spia.o + obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o + obj-$(CONFIG_MTD_NAND_TOTO) += toto.o ++obj-$(CONFIG_MTD_NAND_RB100) += rbmipsnand.o + obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o + obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o + obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o diff --git a/target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch b/target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch new file mode 100644 index 0000000000..9b2272ae0d --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/005-adm5120_usb.patch @@ -0,0 +1,66 @@ +Index: linux-2.6.22.1/drivers/usb/core/hub.c +=================================================================== +--- linux-2.6.22.1.orig/drivers/usb/core/hub.c ++++ linux-2.6.22.1/drivers/usb/core/hub.c +@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub + "%s failed (err = %d)\n", __FUNCTION__, ret); + else { + *status = le16_to_cpu(hub->status->hub.wHubStatus); +- *change = le16_to_cpu(hub->status->hub.wHubChange); ++ *change = le16_to_cpu(hub->status->hub.wHubChange); + ret = 0; + } + mutex_unlock(&hub->status_mutex); +@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu + ret = -EIO; + } else { + *status = le16_to_cpu(hub->status->port.wPortStatus); +- *change = le16_to_cpu(hub->status->port.wPortChange); ++ *change = le16_to_cpu(hub->status->port.wPortChange); + ret = 0; + } + mutex_unlock(&hub->status_mutex); +@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru + USB_DT_DEVICE << 8, 0, + buf, GET_DESCRIPTOR_BUFSIZE, + USB_CTRL_GET_TIMEOUT); ++printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0, ++buf->bDescriptorType, USB_DT_DEVICE); + switch (buf->bMaxPacketSize0) { + case 8: case 16: case 32: case 64: case 255: + if (buf->bDescriptorType == +Index: linux-2.6.22.1/drivers/usb/host/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/usb/host/Kconfig ++++ linux-2.6.22.1/drivers/usb/host/Kconfig +@@ -237,3 +237,6 @@ config USB_SL811_CS + To compile this driver as a module, choose M here: the + module will be called "sl811_cs". + ++config USB_ADM5120_HCD ++ tristate "ADM5120 HCD support" ++ depends on USB && MIPS_ADM5120 +Index: linux-2.6.22.1/drivers/usb/host/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/usb/host/Makefile ++++ linux-2.6.22.1/drivers/usb/host/Makefile +@@ -8,6 +8,7 @@ endif + + obj-$(CONFIG_PCI) += pci-quirks.o + ++obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o + obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o +Index: linux-2.6.22.1/drivers/usb/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/usb/Makefile ++++ linux-2.6.22.1/drivers/usb/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ + obj-$(CONFIG_USB_SL811_HCD) += host/ + obj-$(CONFIG_USB_U132_HCD) += host/ + obj-$(CONFIG_USB_OHCI_AT91) += host/ ++obj-$(CONFIG_USB_ADM5120_HCD) += host/ + + obj-$(CONFIG_USB_ACM) += class/ + obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch b/target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch new file mode 100644 index 0000000000..bf173bd92c --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/006-adm5120_leds.patch @@ -0,0 +1,45 @@ +Index: linux-2.6.22.1/drivers/leds/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/leds/Kconfig ++++ linux-2.6.22.1/drivers/leds/Kconfig +@@ -20,6 +20,27 @@ config LEDS_CLASS + + comment "LED drivers" + ++config LEDS_GPIO ++ tristate "LED support for LEDS on GPIO lines" ++ depends on LEDS_CLASS && GENERIC_GPIO ++ help ++ This option enables support for LEDs connected to GPIO lines ++ ++config LEDS_ADM5120 ++ tristate "LED Support for ADM5120 GPIO LEDs" ++ depends on LEDS_GPIO && MIPS_ADM5120 ++ help ++ This option enables support for LEDs connected to GPIO lines ++ on ADM5120 SoC based platforms. ++ ++config LEDS_ADM5120_EXPERIMENTAL ++ bool "Enable ADM5120 LEDs experimental code" ++ depends on LEDS_ADM5120 ++ ++config LEDS_ADM5120_DIAG ++ bool "Enable ADM5120 LEDs diagnostic mode" ++ depends on LEDS_ADM5120 ++ + config LEDS_CORGI + tristate "LED Support for the Sharp SL-C7x0 series" + depends on LEDS_CLASS && PXA_SHARP_C7xx +Index: linux-2.6.22.1/drivers/leds/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/leds/Makefile ++++ linux-2.6.22.1/drivers/leds/Makefile +@@ -5,6 +5,8 @@ obj-$(CONFIG_LEDS_CLASS) += led-class.o + obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o + + # LED Platform Drivers ++obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o ++obj-$(CONFIG_LEDS_ADM5120) += leds-adm5120.o + obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o + obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o + obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch b/target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch new file mode 100644 index 0000000000..71b97ed126 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/007-adm5120_pci.patch @@ -0,0 +1,23 @@ +Index: linux-2.6.22.1/arch/mips/pci/Makefile +=================================================================== +--- linux-2.6.22.1.orig/arch/mips/pci/Makefile ++++ linux-2.6.22.1/arch/mips/pci/Makefile +@@ -50,3 +50,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup- + obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o + obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o + obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o ++obj-$(CONFIG_PCI_ADM5120) += fixup-adm5120.o ops-adm5120.o pci-adm5120.o +Index: linux-2.6.22.1/include/linux/pci_ids.h +=================================================================== +--- linux-2.6.22.1.orig/include/linux/pci_ids.h ++++ linux-2.6.22.1/include/linux/pci_ids.h +@@ -1713,6 +1713,9 @@ + #define PCI_VENDOR_ID_ESDGMBH 0x12fe + #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111 + ++#define PCI_VENDOR_ID_ADMTEK 0x1317 ++#define PCI_DEVICE_ID_ADMTEK_ADM5120 0x5120 ++ + #define PCI_VENDOR_ID_SIIG 0x131f + #define PCI_SUBVENDOR_ID_SIIG 0x131f + #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000 diff --git a/target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch b/target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch new file mode 100644 index 0000000000..7f8451324d --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/008-adm5120_uart.patch @@ -0,0 +1,53 @@ +Index: linux-2.6.22.1/drivers/serial/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/serial/Makefile ++++ linux-2.6.22.1/drivers/serial/Makefile +@@ -21,6 +21,7 @@ obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) + obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o + obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o + obj-$(CONFIG_SERIAL_8250_AU1X00) += 8250_au1x00.o ++obj-$(CONFIG_SERIAL_ADM5120) += adm5120_uart.o + obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o + obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o + obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o +Index: linux-2.6.22.1/include/linux/serial_core.h +=================================================================== +--- linux-2.6.22.1.orig/include/linux/serial_core.h ++++ linux-2.6.22.1/include/linux/serial_core.h +@@ -143,6 +143,9 @@ + #define PORT_KS8695 76 + + ++/* ADMtek ADM5120 SoC */ ++#define PORT_ADM5120 77 ++ + #ifdef __KERNEL__ + + #include +Index: linux-2.6.22.1/drivers/serial/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/serial/Kconfig ++++ linux-2.6.22.1/drivers/serial/Kconfig +@@ -270,6 +270,22 @@ config SERIAL_8250_RM9K + + comment "Non-8250 serial port support" + ++config SERIAL_ADM5120 ++ bool "ADM5120 serial port support" ++ depends on MIPS_ADM5120 ++ select SERIAL_CORE ++ select SERIAL_CORE_CONSOLE ++ help ++ Driver for the on chip UARTs on the ADM5120 SoC ++ ++config ADM5120_NR_UARTS ++ int "Maximum number of ADM5120 serial ports" ++ depends on SERIAL_ADM5120 ++ default "2" ++ ---help--- ++ Set this to the number of serial ports you want the driver to ++ support. ++ + config SERIAL_AMBA_PL010 + tristate "ARM AMBA PL010 serial port support" + depends on ARM_AMBA && (BROKEN || !ARCH_VERSATILE) diff --git a/target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch new file mode 100644 index 0000000000..574b2d2158 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/100-mtd_myloder_partition_parser.patch @@ -0,0 +1,39 @@ +Index: linux-2.6.22.1/drivers/mtd/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/Kconfig ++++ linux-2.6.22.1/drivers/mtd/Kconfig +@@ -160,6 +160,22 @@ config MTD_AFS_PARTS + for your particular device. It won't happen automatically. The + 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. + ++config MTD_MYLOADER_PARTS ++ tristate "MyLoader partition parsing" ++ depends on MIPS_ADM5120 && MTD_PARTITIONS ++ ---help--- ++ MyLoader is a bootloader which allows the user to define partitions ++ in flash devices, by putting a table in the second erase block ++ on the device, similar to a partition table. This table gives the ++ offsets and lengths of the user defined partitions. ++ ++ If you need code which can detect and parse these tables, and ++ register MTD 'partitions' corresponding to each image detected, ++ enable this option. ++ ++ You will still need the parsing functions to be called by the driver ++ for your particular device. It won't happen automatically. ++ + comment "User Modules And Translation Layers" + + config MTD_CHAR +Index: linux-2.6.22.1/drivers/mtd/Makefile +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/Makefile ++++ linux-2.6.22.1/drivers/mtd/Makefile +@@ -11,6 +11,7 @@ obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o ++obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch new file mode 100644 index 0000000000..84c45d2014 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/101-cfi_fixup_macronix_bootloc.patch @@ -0,0 +1,95 @@ +Index: linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/chips/cfi_cmdset_0002.c ++++ linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -47,12 +47,19 @@ + #define MANUFACTURER_AMD 0x0001 + #define MANUFACTURER_ATMEL 0x001F + #define MANUFACTURER_SST 0x00BF ++#define MANUFACTURER_MACRONIX 0x00C2 + #define SST49LF004B 0x0060 + #define SST49LF040B 0x0050 + #define SST49LF008A 0x005a + #define AT49BV6416 0x00d6 + #define MANUFACTURER_SAMSUNG 0x00ec + ++/* Macronix */ ++#define MX29LV160B 0x2249 /* MX29LV160 Bottom-boot chip */ ++#define MX29LV160T 0x22C4 /* MX29LV160 Top-boot chip */ ++#define MX29LV320B 0x22A8 /* MX29LV320 Bottom-boot chip */ ++#define MX29LV320T 0x22A7 /* MX29LV320 Top-boot chip */ ++ + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); +@@ -217,6 +224,41 @@ static void fixup_use_atmel_lock(struct + mtd->flags |= MTD_STUPID_LOCK; + } + ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++/* ++ * Some Macronix chips has no/bad bootblock information in the CFI table ++ */ ++static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param) ++{ ++ struct map_info *map = mtd->priv; ++ struct cfi_private *cfi = map->fldrv_priv; ++ struct cfi_pri_amdstd *extp = cfi->cmdset_priv; ++ __u8 t; ++ ++ switch (cfi->id) { ++ /* TODO: put affected chip ids here */ ++ case MX29LV160B: ++ case MX29LV320B: ++ t = 2; /* Bottom boot */ ++ break; ++ case MX29LV160T: ++ case MX29LV320T: ++ t = 3; /* Top boot */ ++ break; ++ default: ++ return; ++ } ++ ++ if (extp->TopBottom == t) ++ /* boot location detected by the CFI layer is correct */ ++ return; ++ ++ extp->TopBottom = t; ++ printk("%s: Macronix chip detected, id:0x%04X, boot location forced " ++ "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top"); ++} ++#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */ ++ + static struct cfi_fixup cfi_fixup_table[] = { + #ifdef AMD_BOOTLOC_BUG + { CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL }, +@@ -231,6 +273,9 @@ static struct cfi_fixup cfi_fixup_table[ + { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, }, + #endif + { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL }, ++#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, }, ++#endif + { 0, 0, NULL, NULL } + }; + static struct cfi_fixup jedec_fixup_table[] = { +Index: linux-2.6.22.1/drivers/mtd/chips/Kconfig +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/chips/Kconfig ++++ linux-2.6.22.1/drivers/mtd/chips/Kconfig +@@ -196,6 +196,14 @@ config MTD_CFI_AMDSTD + provides support for one of those command sets, used on chips + including the AMD Am29LV320. + ++config MTD_CFI_FIXUP_MACRONIX_BOOTLOC ++ bool "Force bottom boot for Macronix flash chips" ++ depends on MTD_CFI_AMDSTD ++ help ++ Some Macronix flash chips have no/wrong boot-block location in the ++ CFI table, and the driver may detect the type incorrectly. Select ++ this if your board has such chip. ++ + config MTD_CFI_STAA + tristate "Support for ST (Advanced Architecture) flash chips" + depends on MTD_GEN_PROBE diff --git a/target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch new file mode 100644 index 0000000000..abed363edb --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/102-jedec_pmc_39lvxxx_chips.patch @@ -0,0 +1,74 @@ +Index: linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c +=================================================================== +--- linux-2.6.22.1.orig/drivers/mtd/chips/jedec_probe.c ++++ linux-2.6.22.1/drivers/mtd/chips/jedec_probe.c +@@ -121,6 +121,10 @@ + #define UPD29F064115 0x221C + + /* PMC */ ++#define PM39LV512 0x001B ++#define PM39LV010 0x001C ++#define PM39LV020 0x003D ++#define PM39LV040 0x003E + #define PM49FL002 0x006D + #define PM49FL004 0x006E + #define PM49FL008 0x006A +@@ -1246,6 +1250,58 @@ static const struct amd_flash_info jedec + ERASEINFO(0x02000,2), + ERASEINFO(0x04000,1), + } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV512, ++ .name = "PMC Pm39LV512", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ ++ }, ++ .DevSize = SIZE_64KiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 1, ++ .regions = { ++ ERASEINFO(0x01000,16), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV010, ++ .name = "PMC Pm39LV010", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ ++ }, ++ .DevSize = SIZE_128KiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 1, ++ .regions = { ++ ERASEINFO(0x01000,32), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV020, ++ .name = "PMC Pm39LV020", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ ++ }, ++ .DevSize = SIZE_256KiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 1, ++ .regions = { ++ ERASEINFO(0x01000,64), ++ } ++ }, { ++ .mfr_id = MANUFACTURER_PMC, ++ .dev_id = PM39LV040, ++ .name = "PMC Pm39LV040", ++ .uaddr = { ++ [0] = MTD_UADDR_0x0555_0x02AA /* x8 */ ++ }, ++ .DevSize = SIZE_512KiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 1, ++ .regions = { ++ ERASEINFO(0x01000,128), ++ } + }, { + .mfr_id = MANUFACTURER_PMC, + .dev_id = PM49FL002, diff --git a/target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch b/target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch new file mode 100644 index 0000000000..093dfc6b4f --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/140-cmdline_hack.patch @@ -0,0 +1,26 @@ +Index: linux-2.6.22.1/arch/mips/kernel/head.S +=================================================================== +--- linux-2.6.22.1.orig/arch/mips/kernel/head.S ++++ linux-2.6.22.1/arch/mips/kernel/head.S +@@ -129,14 +129,19 @@ + #endif + .endm + +- + j kernel_entry + nop +- ++ nop ++ + /* + * Reserved space for exception handlers. + * Necessary for machines which link their kernels at KSEG0. ++ * Use as temporary storage for the kernel command line, so that it ++ * can be updated easily without having to relink the kernel. + */ ++ ++EXPORT(_image_cmdline) ++ .ascii "CMDLINE:" + .align 10 + + EXPORT(stext) # used for profiling diff --git a/target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch new file mode 100644 index 0000000000..840d5a4cf5 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/200-amba_pl010_hacks.patch @@ -0,0 +1,297 @@ +Index: linux/drivers/serial/amba-pl010.c +=================================================================== +--- linux.orig/drivers/serial/amba-pl010.c ++++ linux/drivers/serial/amba-pl010.c +@@ -52,11 +52,10 @@ + + #include + +-#define UART_NR 8 +- + #define SERIAL_AMBA_MAJOR 204 + #define SERIAL_AMBA_MINOR 16 +-#define SERIAL_AMBA_NR UART_NR ++#define SERIAL_AMBA_NR CONFIG_SERIAL_AMBA_PL010_NUMPORTS ++#define SERIAL_AMBA_NAME CONFIG_SERIAL_AMBA_PL010_PORTNAME + + #define AMBA_ISR_PASS_LIMIT 256 + +@@ -82,7 +81,7 @@ static void pl010_stop_tx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = readl(uap->port.membase + UART010_CR); + cr &= ~UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); + } +@@ -92,7 +91,7 @@ static void pl010_start_tx(struct uart_p + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_TIE; + writel(cr, uap->port.membase + UART010_CR); + } +@@ -102,7 +101,7 @@ static void pl010_stop_rx(struct uart_po + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = readl(uap->port.membase + UART010_CR); + cr &= ~(UART010_CR_RIE | UART010_CR_RTIE); + writel(cr, uap->port.membase + UART010_CR); + } +@@ -112,7 +111,7 @@ static void pl010_enable_ms(struct uart_ + struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; + +- cr = readb(uap->port.membase + UART010_CR); ++ cr = readl(uap->port.membase + UART010_CR); + cr |= UART010_CR_MSIE; + writel(cr, uap->port.membase + UART010_CR); + } +@@ -122,9 +121,9 @@ static void pl010_rx_chars(struct uart_a + struct tty_struct *tty = uap->port.info->tty; + unsigned int status, ch, flag, rsr, max_count = 256; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = readl(uap->port.membase + UART01x_FR); + while (UART_RX_DATA(status) && max_count--) { +- ch = readb(uap->port.membase + UART01x_DR); ++ ch = readl(uap->port.membase + UART01x_DR); + flag = TTY_NORMAL; + + uap->port.icount.rx++; +@@ -133,7 +132,7 @@ static void pl010_rx_chars(struct uart_a + * Note that the error handling code is + * out of the main execution path + */ +- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; ++ rsr = readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX; + if (unlikely(rsr & UART01x_RSR_ANY)) { + writel(0, uap->port.membase + UART01x_ECR); + +@@ -165,7 +164,7 @@ static void pl010_rx_chars(struct uart_a + uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag); + + ignore_char: +- status = readb(uap->port.membase + UART01x_FR); ++ status = readl(uap->port.membase + UART01x_FR); + } + spin_unlock(&uap->port.lock); + tty_flip_buffer_push(tty); +@@ -210,7 +209,7 @@ static void pl010_modem_status(struct ua + + writel(0, uap->port.membase + UART010_ICR); + +- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + delta = status ^ uap->old_status; + uap->old_status = status; +@@ -238,7 +237,7 @@ static irqreturn_t pl010_int(int irq, vo + + spin_lock(&uap->port.lock); + +- status = readb(uap->port.membase + UART010_IIR); ++ status = readl(uap->port.membase + UART010_IIR); + if (status) { + do { + if (status & (UART010_IIR_RTIS | UART010_IIR_RIS)) +@@ -251,7 +250,7 @@ static irqreturn_t pl010_int(int irq, vo + if (pass_counter-- == 0) + break; + +- status = readb(uap->port.membase + UART010_IIR); ++ status = readl(uap->port.membase + UART010_IIR); + } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS | + UART010_IIR_TIS)); + handled = 1; +@@ -265,7 +264,7 @@ static irqreturn_t pl010_int(int irq, vo + static unsigned int pl010_tx_empty(struct uart_port *port) + { + struct uart_amba_port *uap = (struct uart_amba_port *)port; +- unsigned int status = readb(uap->port.membase + UART01x_FR); ++ unsigned int status = readl(uap->port.membase + UART01x_FR); + return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT; + } + +@@ -275,7 +274,7 @@ static unsigned int pl010_get_mctrl(stru + unsigned int result = 0; + unsigned int status; + +- status = readb(uap->port.membase + UART01x_FR); ++ status = readl(uap->port.membase + UART01x_FR); + if (status & UART01x_FR_DCD) + result |= TIOCM_CAR; + if (status & UART01x_FR_DSR) +@@ -301,7 +300,7 @@ static void pl010_break_ctl(struct uart_ + unsigned int lcr_h; + + spin_lock_irqsave(&uap->port.lock, flags); +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = readl(uap->port.membase + UART010_LCRH); + if (break_state == -1) + lcr_h |= UART01x_LCRH_BRK; + else +@@ -334,7 +333,7 @@ static int pl010_startup(struct uart_por + /* + * initialise the old status of the modem signals + */ +- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; ++ uap->old_status = readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + + /* + * Finally, enable interrupts +@@ -365,7 +364,7 @@ static void pl010_shutdown(struct uart_p + writel(0, uap->port.membase + UART010_CR); + + /* disable break condition and fifos */ +- writel(readb(uap->port.membase + UART010_LCRH) & ++ writel(readl(uap->port.membase + UART010_LCRH) & + ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN), + uap->port.membase + UART010_LCRH); + +@@ -387,7 +386,7 @@ pl010_set_termios(struct uart_port *port + /* + * Ask the core to calculate the divisor for us. + */ +- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); ++ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); + quot = uart_get_divisor(port, baud); + + switch (termios->c_cflag & CSIZE) { +@@ -450,7 +449,7 @@ pl010_set_termios(struct uart_port *port + uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX; + + /* first, disable everything */ +- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; ++ old_cr = readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE; + + if (UART_ENABLE_MS(port, termios->c_cflag)) + old_cr |= UART010_CR_MSIE; +@@ -540,7 +539,7 @@ static struct uart_ops amba_pl010_pops = + .verify_port = pl010_verify_port, + }; + +-static struct uart_amba_port *amba_ports[UART_NR]; ++static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR]; + + #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE + +@@ -550,7 +549,7 @@ static void pl010_console_putchar(struct + unsigned int status; + + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = readl(uap->port.membase + UART01x_FR); + barrier(); + } while (!UART_TX_READY(status)); + writel(ch, uap->port.membase + UART01x_DR); +@@ -567,7 +566,7 @@ pl010_console_write(struct console *co, + /* + * First save the CR then disable the interrupts + */ +- old_cr = readb(uap->port.membase + UART010_CR); ++ old_cr = readl(uap->port.membase + UART010_CR); + writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR); + + uart_console_write(&uap->port, s, count, pl010_console_putchar); +@@ -577,7 +576,7 @@ pl010_console_write(struct console *co, + * and restore the TCR + */ + do { +- status = readb(uap->port.membase + UART01x_FR); ++ status = readl(uap->port.membase + UART01x_FR); + barrier(); + } while (status & UART01x_FR_BUSY); + writel(old_cr, uap->port.membase + UART010_CR); +@@ -589,9 +588,9 @@ static void __init + pl010_console_get_options(struct uart_amba_port *uap, int *baud, + int *parity, int *bits) + { +- if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { ++ if (readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) { + unsigned int lcr_h, quot; +- lcr_h = readb(uap->port.membase + UART010_LCRH); ++ lcr_h = readl(uap->port.membase + UART010_LCRH); + + *parity = 'n'; + if (lcr_h & UART01x_LCRH_PEN) { +@@ -606,8 +605,8 @@ pl010_console_get_options(struct uart_am + else + *bits = 8; + +- quot = readb(uap->port.membase + UART010_LCRL) | +- readb(uap->port.membase + UART010_LCRM) << 8; ++ quot = readl(uap->port.membase + UART010_LCRL) | ++ readl(uap->port.membase + UART010_LCRM) << 8; + *baud = uap->port.uartclk / (16 * (quot + 1)); + } + } +@@ -625,7 +624,7 @@ static int __init pl010_console_setup(st + * if so, search for the first available port that does have + * console support. + */ +- if (co->index >= UART_NR) ++ if (co->index >= SERIAL_AMBA_NR) + co->index = 0; + uap = amba_ports[co->index]; + if (!uap) +@@ -643,7 +642,7 @@ static int __init pl010_console_setup(st + + static struct uart_driver amba_reg; + static struct console amba_console = { +- .name = "ttyAM", ++ .name = SERIAL_AMBA_NAME, + .write = pl010_console_write, + .device = uart_console_device, + .setup = pl010_console_setup, +@@ -659,11 +658,11 @@ static struct console amba_console = { + + static struct uart_driver amba_reg = { + .owner = THIS_MODULE, +- .driver_name = "ttyAM", +- .dev_name = "ttyAM", ++ .driver_name = SERIAL_AMBA_NAME, ++ .dev_name = SERIAL_AMBA_NAME, + .major = SERIAL_AMBA_MAJOR, + .minor = SERIAL_AMBA_MINOR, +- .nr = UART_NR, ++ .nr = SERIAL_AMBA_NR, + .cons = AMBA_CONSOLE, + }; + +Index: linux/drivers/serial/Kconfig +=================================================================== +--- linux.orig/drivers/serial/Kconfig ++++ linux/drivers/serial/Kconfig +@@ -293,10 +293,25 @@ config SERIAL_AMBA_PL010 + help + This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have + an Integrator/AP or Integrator/PP2 platform, or if you have a +- Cirrus Logic EP93xx CPU, say Y or M here. ++ Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here. + + If unsure, say N. + ++config SERIAL_AMBA_PL010_NUMPORTS ++ int "Maximum number of AMBA PL010 serial ports" ++ depends on SERIAL_AMBA_PL010 ++ default "8" ++ ---help--- ++ Set this to the number of serial ports you want the AMBA PL010 driver ++ to support. ++ ++config SERIAL_AMBA_PL010_PORTNAME ++ string "Name of the AMBA PL010 serial ports" ++ depends on SERIAL_AMBA_PL010 ++ default "ttyAM" ++ ---help--- ++ ::: To be written ::: ++ + config SERIAL_AMBA_PL010_CONSOLE + bool "Support for console on AMBA serial port" + depends on SERIAL_AMBA_PL010=y diff --git a/target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch b/target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch new file mode 100644 index 0000000000..3b92f25611 --- /dev/null +++ b/target/linux/adm5120/patches-2.6.22/201-amba_bus_hacks.patch @@ -0,0 +1,15 @@ +Index: linux/drivers/amba/bus.c +=================================================================== +--- linux.orig/drivers/amba/bus.c ++++ linux/drivers/amba/bus.c +@@ -17,6 +17,10 @@ + #include + #include + ++#ifndef NO_IRQ ++#define NO_IRQ (-1) ++#endif ++ + #define to_amba_device(d) container_of(d, struct amba_device, dev) + #define to_amba_driver(d) container_of(d, struct amba_driver, drv) + diff --git a/target/linux/adm5120/profiles/100-Atheros.mk b/target/linux/adm5120/profiles/100-Atheros.mk new file mode 100644 index 0000000000..029586848f --- /dev/null +++ b/target/linux/adm5120/profiles/100-Atheros.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Atheros + NAME:=Atheros WiFi (default) + PACKAGES:=kmod-madwifi +endef + +define Profile/Atheros/Description + Package set compatible with hardware using Atheros WiFi cards +endef +$(eval $(call Profile,Atheros)) + diff --git a/target/linux/adm5120/profiles/105-Texas.mk b/target/linux/adm5120/profiles/105-Texas.mk new file mode 100644 index 0000000000..727a0c0648 --- /dev/null +++ b/target/linux/adm5120/profiles/105-Texas.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Texas + NAME:=Texas Instruments WiFi + PACKAGES:=kmod-acx +endef + +define Profile/Texas/Description + Package set compatible with hardware using Texas Instruments WiFi cards +endef +$(eval $(call Profile,Texas)) + diff --git a/target/linux/adm5120/profiles/110-Ralink.mk b/target/linux/adm5120/profiles/110-Ralink.mk new file mode 100644 index 0000000000..d30ee73944 --- /dev/null +++ b/target/linux/adm5120/profiles/110-Ralink.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Ralink + NAME:=Ralink WiFi + PACKAGES:=kmod-rt2500 +endef + +define Profile/Ralink/Description + Package set compatible with hardware using Ralink WiFi cards +endef +$(eval $(call Profile,Ralink)) diff --git a/target/linux/adm5120/profiles/200-None.mk b/target/linux/adm5120/profiles/200-None.mk new file mode 100644 index 0000000000..2fcfacde9f --- /dev/null +++ b/target/linux/adm5120/profiles/200-None.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/None + NAME:=No WiFi + PACKAGES:= +endef + +define Profile/None/Description + Package set without WiFi support +endef +$(eval $(call Profile,None)) + diff --git a/target/linux/adm5120/profiles/Cellvision.mk b/target/linux/adm5120/profiles/Cellvision.mk new file mode 100644 index 0000000000..6912f13e3e --- /dev/null +++ b/target/linux/adm5120/profiles/Cellvision.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Cellvision + NAME:=Cellvision CAS-63x/77x cameras + PACKAGES:=kmod-rt2500 kmod-cpia2 kmod-usb-ohci kmod-usb2 kmod-usb-audio +endef + +define Profile/Cellvision/Description + Package set compatible with the Cellvision CAS devices, including Wireless variants. +endef +$(eval $(call Profile,Cellvision)) diff --git a/target/linux/adm5120/profiles/RB1xx.mk b/target/linux/adm5120/profiles/RB1xx.mk new file mode 100644 index 0000000000..9dd3de0973 --- /dev/null +++ b/target/linux/adm5120/profiles/RB1xx.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/RouterBoard + NAME:=RouterBoard RB1xx + PACKAGES:=kmod-madwifi +endef + +define Profile/RouterBoard/Description + Package set compatible with the RouterBoard RB1xx devices. Contains RouterOS to OpenWrt\\\ + installation scripts. +endef +$(eval $(call Profile,RouterBoard)) diff --git a/target/linux/adm5120eb-2.6/Makefile b/target/linux/adm5120eb-2.6/Makefile deleted file mode 100644 index 9205c8bf96..0000000000 --- a/target/linux/adm5120eb-2.6/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mips -BOARD:=adm5120eb -BOARDNAME:=ADM5120 (Big Endian) -FEATURES:=squashfs pci usb broken - -LINUX_VERSION:=2.6.22.4 - -define Target/Description - Build firmware images for Infineon/ADMTek ADM5120 based boards running in big-endian mode - (e.g : ZyXEL Prestige 335WT ...) -endef - -include $(INCLUDE_DIR)/kernel-build.mk -DEFAULT_PACKAGES += admswconfig - -# include the profiles --include profiles/*.mk - -$(eval $(call BuildKernel)) diff --git a/target/linux/adm5120eb-2.6/config/default b/target/linux/adm5120eb-2.6/config/default deleted file mode 100644 index 96c2974e0b..0000000000 --- a/target/linux/adm5120eb-2.6/config/default +++ /dev/null @@ -1,261 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_ADM5120_CPU_OVERRIDES=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_ARM_AMBA=y -# CONFIG_ATM_DRIVERS is not set -CONFIG_BASE_SMALL=0 -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BINFMT_MISC=m -CONFIG_BITREVERSE=y -CONFIG_CIFS_DEBUG2=y -CONFIG_CIFS_EXPERIMENTAL=y -CONFIG_CIFS_STATS2=y -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_CIFS_XATTR=y -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_CRYPTO_SHA1=y -# CONFIG_DDB5477 is not set -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_ELF_CORE=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_EXT3_FS_XATTR=y -CONFIG_FS_MBCACHE=m -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -# CONFIG_GEN_RTC is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HID=m -CONFIG_HWMON=y -# CONFIG_HWMON_DEBUG_CHIP is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_INPUT=y -# CONFIG_INPUT_EVDEV is not set -CONFIG_IPV6_MIP6=y -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IRQ_CPU=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_POSIX_ACL=y -CONFIG_JFFS2_FS_SECURITY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_SUMMARY=y -# CONFIG_JOLIET is not set -CONFIG_LEDS_ADM5120=y -CONFIG_LEDS_ADM5120_DIAG=y -# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set -CONFIG_LEDS_GPIO=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MII=m -# CONFIG_MINIX_FS is not set -CONFIG_MIPS=y -CONFIG_MIPS_ADM5120=y -CONFIG_MIPS_ADM5120_ENET=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_ADM5120=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_MYLOADER_PARTS is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_NETDEV_1000=y -CONFIG_NET_KEY=y -# CONFIG_NET_PCI is not set -# CONFIG_NET_PKTGEN is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PARTITION_ADVANCED is not set -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_ADM5120=y -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNPACPI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250 is not set -# CONFIG_SERIAL_ADM5120 is not set -CONFIG_SERIAL_AMBA_PL010=y -CONFIG_SERIAL_AMBA_PL010_CONSOLE=y -CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 -CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" -# CONFIG_SERIAL_AMBA_PL011 is not set -CONFIG_SERIO=y -# CONFIG_SERIO_AMBAKMI is not set -# CONFIG_SERIO_I8042 is not set -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_RAW is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SND_USB_AUDIO is not set -CONFIG_SOFT_WATCHDOG=m -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_TMPFS_POSIX_ACL=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_USB=y -# CONFIG_USBPCWATCHDOG is not set -# CONFIG_USB_ACM is not set -CONFIG_USB_ADM5120_HCD=m -# CONFIG_USB_ATM is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_SERIAL is not set -# CONFIG_USB_STORAGE is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_VGASTATE is not set -CONFIG_VM_EVENT_COUNTERS=y -# CONFIG_ZD1211RW is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120eb-2.6/files b/target/linux/adm5120eb-2.6/files deleted file mode 120000 index 300f20ce64..0000000000 --- a/target/linux/adm5120eb-2.6/files +++ /dev/null @@ -1 +0,0 @@ -../adm5120-2.6/files \ No newline at end of file diff --git a/target/linux/adm5120eb-2.6/image/Makefile b/target/linux/adm5120eb-2.6/image/Makefile deleted file mode 100644 index f47b3ab0b8..0000000000 --- a/target/linux/adm5120eb-2.6/image/Makefile +++ /dev/null @@ -1,80 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -IMGNAME = $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL) -LOADER_MAKE = $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) - -define Image/Build/Loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) LOADER_DATA="" \ - LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ - CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ - compile loader.$(2) -endef - -define Build/Clean - $(LOADER_MAKE) clean -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma -endef - -define trxalign/jffs2-128k --a 0x20000 -endef -define trxalign/jffs2-64k --a 0x10000 -endef -define trxalign/squashfs --a 1024 -endef - -define Image/Build/TRX - $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(3) -f $(KDIR)/vmlinux.lzma \ - $(call trxalign/$(2)) -f $(KDIR)/root.$(2) -endef - -define Image/Build/TRXNoloader - $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(KDIR)/vmlinux.lzma \ - $(call trxalign/$(2)) -f $(KDIR)/root.$(2) -endef - -define Image/Build/ZyXEL - $(call Image/Build/Loader,loader-$(2),gz,0x80500000,0) - $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) - #TODO: firmware generation tool needed -endef - -define Image/Build - #FIXME: No firmware images yet -endef - -define Image/Build/LZMAKernel - $(LOADER_MAKE) TARGET_DIR=$(BIN_DIR) \ - LOADER=openwrt-$(BOARD)-$(KERNEL)-ramfs-lzma-$(1).$(2) \ - LOADER_DATA=$(KDIR)/vmlinux.lzma \ - LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ - CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ - compile loader.$(2) -endef - -define Image/Build/LZMAKernel/ZyXEL - $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0,y,$(1)) -endef - -define Image/Build/Initramfs -# this line is here intentionally -ifeq ($(CONFIG_DEVEL),y) - $(call Image/Build/LZMAKernel/ZyXEL,p-334wt,bin) - $(call Image/Build/LZMAKernel/ZyXEL,p-335,bin) -endif -endef - -$(eval $(call BuildImage)) - diff --git a/target/linux/adm5120eb-2.6/image/lzma-loader b/target/linux/adm5120eb-2.6/image/lzma-loader deleted file mode 120000 index d4f96d2d7c..0000000000 --- a/target/linux/adm5120eb-2.6/image/lzma-loader +++ /dev/null @@ -1 +0,0 @@ -../../adm5120-2.6/image/lzma-loader \ No newline at end of file diff --git a/target/linux/adm5120eb-2.6/patches-2.6.22 b/target/linux/adm5120eb-2.6/patches-2.6.22 deleted file mode 120000 index 377f3ad9d8..0000000000 --- a/target/linux/adm5120eb-2.6/patches-2.6.22 +++ /dev/null @@ -1 +0,0 @@ -../adm5120-2.6/patches-2.6.22 \ No newline at end of file diff --git a/target/linux/adm5120eb-2.6/profiles/090-Zyxel.mk b/target/linux/adm5120eb-2.6/profiles/090-Zyxel.mk deleted file mode 100644 index b0741e84be..0000000000 --- a/target/linux/adm5120eb-2.6/profiles/090-Zyxel.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Zyxel - NAME:=Zyxel Prestige P-334/335/335-WT (default) - PACKAGES:=kmod-acx kmod-usb-core kmod-usb-adm5120 -endef - -define Profile/Zyxel/Description - Package set compatible with the Zyxel prestige P-334/335/335-WT boards -endef -$(eval $(call Profile,Zyxel)) - diff --git a/target/linux/adm5120eb-2.6/profiles/100-Texas.mk b/target/linux/adm5120eb-2.6/profiles/100-Texas.mk deleted file mode 100644 index 727a0c0648..0000000000 --- a/target/linux/adm5120eb-2.6/profiles/100-Texas.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Texas - NAME:=Texas Instruments WiFi - PACKAGES:=kmod-acx -endef - -define Profile/Texas/Description - Package set compatible with hardware using Texas Instruments WiFi cards -endef -$(eval $(call Profile,Texas)) - diff --git a/target/linux/adm5120eb-2.6/profiles/110-Atheros.mk b/target/linux/adm5120eb-2.6/profiles/110-Atheros.mk deleted file mode 100644 index cc4a704495..0000000000 --- a/target/linux/adm5120eb-2.6/profiles/110-Atheros.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Atheros - NAME:=Atheros WiFi - PACKAGES:=kmod-madwifi -endef - -define Profile/Atheros/Description - Package set compatible with hardware using Atheros WiFi cards -endef -$(eval $(call Profile,Atheros)) - diff --git a/target/linux/adm5120eb-2.6/profiles/110-None.mk b/target/linux/adm5120eb-2.6/profiles/110-None.mk deleted file mode 100644 index 2fcfacde9f..0000000000 --- a/target/linux/adm5120eb-2.6/profiles/110-None.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/None - NAME:=No WiFi - PACKAGES:= -endef - -define Profile/None/Description - Package set without WiFi support -endef -$(eval $(call Profile,None)) - diff --git a/target/linux/adm5120eb/Makefile b/target/linux/adm5120eb/Makefile new file mode 100644 index 0000000000..9205c8bf96 --- /dev/null +++ b/target/linux/adm5120eb/Makefile @@ -0,0 +1,27 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=mips +BOARD:=adm5120eb +BOARDNAME:=ADM5120 (Big Endian) +FEATURES:=squashfs pci usb broken + +LINUX_VERSION:=2.6.22.4 + +define Target/Description + Build firmware images for Infineon/ADMTek ADM5120 based boards running in big-endian mode + (e.g : ZyXEL Prestige 335WT ...) +endef + +include $(INCLUDE_DIR)/kernel-build.mk +DEFAULT_PACKAGES += admswconfig + +# include the profiles +-include profiles/*.mk + +$(eval $(call BuildKernel)) diff --git a/target/linux/adm5120eb/config/default b/target/linux/adm5120eb/config/default new file mode 100644 index 0000000000..96c2974e0b --- /dev/null +++ b/target/linux/adm5120eb/config/default @@ -0,0 +1,261 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_ADM5120_CPU_OVERRIDES=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARM_AMBA=y +# CONFIG_ATM_DRIVERS is not set +CONFIG_BASE_SMALL=0 +CONFIG_BAYCOM_SER_FDX=m +CONFIG_BAYCOM_SER_HDX=m +CONFIG_BINFMT_MISC=m +CONFIG_BITREVERSE=y +CONFIG_CIFS_DEBUG2=y +CONFIG_CIFS_EXPERIMENTAL=y +CONFIG_CIFS_STATS2=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_XATTR=y +CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit" +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_DDB5477 is not set +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_ELF_CORE=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT3_FS_XATTR=y +CONFIG_FS_MBCACHE=m +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_ACL=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +# CONFIG_GEN_RTC is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HID=m +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_I2C is not set +# CONFIG_IDE is not set +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INITRAMFS_SOURCE="" +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_INPUT=y +# CONFIG_INPUT_EVDEV is not set +CONFIG_IPV6_MIP6=y +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IRQ_CPU=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JOLIET is not set +CONFIG_LEDS_ADM5120=y +CONFIG_LEDS_ADM5120_DIAG=y +# CONFIG_LEDS_ADM5120_EXPERIMENTAL is not set +CONFIG_LEDS_GPIO=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_VR41XX is not set +CONFIG_MII=m +# CONFIG_MINIX_FS is not set +CONFIG_MIPS=y +CONFIG_MIPS_ADM5120=y +CONFIG_MIPS_ADM5120_ENET=y +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_EV64120 is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MIPS_VPE_LOADER is not set +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_ADM5120=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_BLOCK2MTD=y +CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_MYLOADER_PARTS is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +CONFIG_NETDEV_1000=y +CONFIG_NET_KEY=y +# CONFIG_NET_PCI is not set +# CONFIG_NET_PKTGEN is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PARTITION_ADVANCED is not set +# CONFIG_PCIPCWATCHDOG is not set +CONFIG_PCI_ADM5120=y +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNPACPI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_RTC is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250 is not set +# CONFIG_SERIAL_ADM5120 is not set +CONFIG_SERIAL_AMBA_PL010=y +CONFIG_SERIAL_AMBA_PL010_CONSOLE=y +CONFIG_SERIAL_AMBA_PL010_NUMPORTS=2 +CONFIG_SERIAL_AMBA_PL010_PORTNAME="ttyS" +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SERIO=y +# CONFIG_SERIO_AMBAKMI is not set +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SND_USB_AUDIO is not set +CONFIG_SOFT_WATCHDOG=m +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_TRAD_SIGNALS=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_USB=y +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_USB_ACM is not set +CONFIG_USB_ADM5120_HCD=m +# CONFIG_USB_ATM is not set +# CONFIG_USB_CATC is not set +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_SERIAL is not set +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_VGASTATE is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_ZD1211RW is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/adm5120eb/files b/target/linux/adm5120eb/files new file mode 120000 index 0000000000..aadc1cd380 --- /dev/null +++ b/target/linux/adm5120eb/files @@ -0,0 +1 @@ +../adm5120/files \ No newline at end of file diff --git a/target/linux/adm5120eb/image/Makefile b/target/linux/adm5120eb/image/Makefile new file mode 100644 index 0000000000..f47b3ab0b8 --- /dev/null +++ b/target/linux/adm5120eb/image/Makefile @@ -0,0 +1,80 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +IMGNAME = $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL) +LOADER_MAKE = $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) + +define Image/Build/Loader + $(LOADER_MAKE) LOADER=loader-$(1).$(2) LOADER_DATA="" \ + LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ + CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ + compile loader.$(2) +endef + +define Build/Clean + $(LOADER_MAKE) clean +endef + +define Image/Prepare + cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma +endef + +define trxalign/jffs2-128k +-a 0x20000 +endef +define trxalign/jffs2-64k +-a 0x10000 +endef +define trxalign/squashfs +-a 1024 +endef + +define Image/Build/TRX + $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(3) -f $(KDIR)/vmlinux.lzma \ + $(call trxalign/$(2)) -f $(KDIR)/root.$(2) +endef + +define Image/Build/TRXNoloader + $(STAGING_DIR_HOST)/bin/trx -o $(1) -f $(KDIR)/vmlinux.lzma \ + $(call trxalign/$(2)) -f $(KDIR)/root.$(2) +endef + +define Image/Build/ZyXEL + $(call Image/Build/Loader,loader-$(2),gz,0x80500000,0) + $(call Image/Build/TRXNoloader,$(IMGNAME)-$(3)-$(2).trx,$(1)) + #TODO: firmware generation tool needed +endef + +define Image/Build + #FIXME: No firmware images yet +endef + +define Image/Build/LZMAKernel + $(LOADER_MAKE) TARGET_DIR=$(BIN_DIR) \ + LOADER=openwrt-$(BOARD)-$(KERNEL)-ramfs-lzma-$(1).$(2) \ + LOADER_DATA=$(KDIR)/vmlinux.lzma \ + LZMA_TEXT_START=$(3) LZMA_STARTUP_ORG=$(4) \ + CONFIG_PASS_KARGS=$(5) CONFIG_BOARD=$(6) \ + compile loader.$(2) +endef + +define Image/Build/LZMAKernel/ZyXEL + $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0,y,$(1)) +endef + +define Image/Build/Initramfs +# this line is here intentionally +ifeq ($(CONFIG_DEVEL),y) + $(call Image/Build/LZMAKernel/ZyXEL,p-334wt,bin) + $(call Image/Build/LZMAKernel/ZyXEL,p-335,bin) +endif +endef + +$(eval $(call BuildImage)) + diff --git a/target/linux/adm5120eb/image/lzma-loader b/target/linux/adm5120eb/image/lzma-loader new file mode 120000 index 0000000000..d4f96d2d7c --- /dev/null +++ b/target/linux/adm5120eb/image/lzma-loader @@ -0,0 +1 @@ +../../adm5120-2.6/image/lzma-loader \ No newline at end of file diff --git a/target/linux/adm5120eb/patches-2.6.22 b/target/linux/adm5120eb/patches-2.6.22 new file mode 120000 index 0000000000..09e734222b --- /dev/null +++ b/target/linux/adm5120eb/patches-2.6.22 @@ -0,0 +1 @@ +../adm5120/patches-2.6.22 \ No newline at end of file diff --git a/target/linux/adm5120eb/profiles/090-Zyxel.mk b/target/linux/adm5120eb/profiles/090-Zyxel.mk new file mode 100644 index 0000000000..b0741e84be --- /dev/null +++ b/target/linux/adm5120eb/profiles/090-Zyxel.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Zyxel + NAME:=Zyxel Prestige P-334/335/335-WT (default) + PACKAGES:=kmod-acx kmod-usb-core kmod-usb-adm5120 +endef + +define Profile/Zyxel/Description + Package set compatible with the Zyxel prestige P-334/335/335-WT boards +endef +$(eval $(call Profile,Zyxel)) + diff --git a/target/linux/adm5120eb/profiles/100-Texas.mk b/target/linux/adm5120eb/profiles/100-Texas.mk new file mode 100644 index 0000000000..727a0c0648 --- /dev/null +++ b/target/linux/adm5120eb/profiles/100-Texas.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Texas + NAME:=Texas Instruments WiFi + PACKAGES:=kmod-acx +endef + +define Profile/Texas/Description + Package set compatible with hardware using Texas Instruments WiFi cards +endef +$(eval $(call Profile,Texas)) + diff --git a/target/linux/adm5120eb/profiles/110-Atheros.mk b/target/linux/adm5120eb/profiles/110-Atheros.mk new file mode 100644 index 0000000000..cc4a704495 --- /dev/null +++ b/target/linux/adm5120eb/profiles/110-Atheros.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Atheros + NAME:=Atheros WiFi + PACKAGES:=kmod-madwifi +endef + +define Profile/Atheros/Description + Package set compatible with hardware using Atheros WiFi cards +endef +$(eval $(call Profile,Atheros)) + diff --git a/target/linux/adm5120eb/profiles/110-None.mk b/target/linux/adm5120eb/profiles/110-None.mk new file mode 100644 index 0000000000..2fcfacde9f --- /dev/null +++ b/target/linux/adm5120eb/profiles/110-None.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/None + NAME:=No WiFi + PACKAGES:= +endef + +define Profile/None/Description + Package set without WiFi support +endef +$(eval $(call Profile,None)) + diff --git a/target/linux/amazon-2.6/Makefile b/target/linux/amazon-2.6/Makefile deleted file mode 100644 index 1967d52f42..0000000000 --- a/target/linux/amazon-2.6/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mips -BOARD:=amazon -BOARDNAME:=Infineon Amazon -FEATURES:=squashfs jffs2 broken - -define Target/Description - Build firmware images for Infineon Amazon boards -endef - -KERNELNAME:="uImage" - -include $(INCLUDE_DIR)/kernel-build.mk - -# include the profiles --include profiles/*.mk - -$(eval $(call BuildKernel)) diff --git a/target/linux/amazon-2.6/base-files/default/etc/config/network b/target/linux/amazon-2.6/base-files/default/etc/config/network deleted file mode 100644 index 72e39f88a4..0000000000 --- a/target/linux/amazon-2.6/base-files/default/etc/config/network +++ /dev/null @@ -1,14 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth1 - option type bridge - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 diff --git a/target/linux/amazon-2.6/config/default b/target/linux/amazon-2.6/config/default deleted file mode 100644 index 2229e6317b..0000000000 --- a/target/linux/amazon-2.6/config/default +++ /dev/null @@ -1,211 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_AMAZON=y -CONFIG_AMAZON_ASC_UART=y -CONFIG_AMAZON_MTD=y -CONFIG_AMAZON_NET_SW=y -CONFIG_AMAZON_PCI=y -CONFIG_AMAZON_WDT=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ATM is not set -# CONFIG_ATMEL is not set -CONFIG_BASE_SMALL=0 -# CONFIG_BCM43XX is not set -CONFIG_BITREVERSE=y -# CONFIG_BT is not set -CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh" -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_DDB5477 is not set -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -# CONFIG_GENERIC_GPIO is not set -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -# CONFIG_GEN_RTC is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAVE_STD_PC_SERIAL_PORT=y -# CONFIG_HERMES is not set -# CONFIG_HOSTAP is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_IRQ_CPU=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_MIPS_MTX1 is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_AMAZON_BUS_WIDTH_16=y -# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set -# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set -# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set -# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set -CONFIG_MTD_AMAZON_FLASH_SIZE_4=y -# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_GEOMETRY is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_ONENAND is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_START=0x0 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3 -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NET_PCI is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PCIPCWATCHDOG is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNPACPI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PRISM54 is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SERIAL_8250 is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB is not set diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/Kconfig b/target/linux/amazon-2.6/files/arch/mips/amazon/Kconfig deleted file mode 100644 index 179e35efd2..0000000000 --- a/target/linux/amazon-2.6/files/arch/mips/amazon/Kconfig +++ /dev/null @@ -1,63 +0,0 @@ -# copyright 2007 john crispin - -menu "Amazon built-in" - -config AMAZON_ASC_UART - bool "Amazon asc uart" - select SERIAL_CORE - select SERIAL_CORE_CONSOLE - default y - -config AMAZON_PCI - bool "Amazon PCI support" - default y - select HW_HAS_PCI - select PCI - -config AMAZON_NET_SW - bool "Amazon network" - default y - -config AMAZON_WDT - bool "Amazon watchdog timer" - default y - -config AMAZON_MTD - bool "Amazon MTD map" - default y - -choice - prompt "Flash Size" - depends on AMAZON_MTD - -config MTD_AMAZON_FLASH_SIZE_2 - bool "2MB" - -config MTD_AMAZON_FLASH_SIZE_4 - bool "4MB" - -config MTD_AMAZON_FLASH_SIZE_8 - bool "8MB" - -config MTD_AMAZON_FLASH_SIZE_16 - bool "16MB" - -endchoice - -choice - prompt "Bus Width" - depends on AMAZON_MTD - -config MTD_AMAZON_BUS_WIDTH_8 - bool "8-bit" - -config MTD_AMAZON_BUS_WIDTH_16 - bool "16-bit" - -config MTD_AMAZON_BUS_WIDTH_32 - bool "32-bit" - -endchoice - - -endmenu diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/Makefile b/target/linux/amazon-2.6/files/arch/mips/amazon/Makefile deleted file mode 100644 index 9cdc100b8c..0000000000 --- a/target/linux/amazon-2.6/files/arch/mips/amazon/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Copyright 2007 openwrt.org -# John Crispin -# -# Makefile for Infineon Amazon -# -obj-y := dma-core.o interrupt.o prom.o setup.o -obj-$(CONFIG_PCI) += pci.o - diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.c b/target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.c deleted file mode 100644 index 242bc77af2..0000000000 --- a/target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.c +++ /dev/null @@ -1,1455 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -//----------------------------------------------------------------------- -/* - * Description: - * Driver for Infineon Amazon DMA - */ -//----------------------------------------------------------------------- -/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] - * Created: 7-April-2004 - */ -//----------------------------------------------------------------------- -/* History - * Last changed on: 4-May-2004 - * Last changed by: - * Reason: debug - */ -//----------------------------------------------------------------------- -/* Last changed on: 03-Dec-2004 - * Last changed by: peng.liu@infineon.com - * Reason: recover from TPE bug - */ - -//000004:fchang 2005/6/2 Modified by Linpeng as described below -//----------------------------------------------------------------------- -/* Last changed on: 28-Jan-2004 - * Last changed by: peng.liu@infineon.com - * Reason: - * - handle "out of memory" bug - */ -//000003:tc.chen 2005/06/16 fix memory leak when Tx buffer full (heaving traffic). -//507261:tc.chen 2005/07/26 re-organize code address map to improve performance. - -#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS) -#define MODVERSIONS -#endif - -#if defined(MODVERSIONS) && !defined(__GENKSYMS__) -#include -#endif - -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB /* need this one 'cause we export symbols */ -#endif - -#undef DMA_NO_POLLING - -/* no TX interrupt handling */ -#define NO_TX_INT -/* need for DMA workaround */ -#undef AMAZON_DMA_TPE_AAL5_RECOVERY - -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY -#define MAX_SYNC_FAILS 1000000 // 000004:fchang -unsigned int dma_sync_fails = 0; -unsigned int total_dma_tpe_reset = 0; -int (*tpe_reset) (void); -int (*tpe_start) (void); -int (*tpe_inject) (void); -#endif // AMAZON_DMA_TPE_AAL5_RECOVERY - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include "dma-core.h" - -#define AMAZON_DMA_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args) - -static irqreturn_t dma_interrupt(int irq, void *dev_id); -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); - -/***************************************** global data *******************************************/ -u64 *g_desc_list; -dev_list *g_current_dev = NULL; -dev_list *g_head_dev = NULL; -dev_list *g_tail_dev = NULL; -channel_info g_log_chan[CHAN_TOTAL_NUM + 1]; -struct proc_dir_entry *g_amazon_dma_dir; -static u8 rx_chan_list_len = 0; -static u8 tx_chan_list_len = 0; -static int rx_chan_list[RX_CHAN_NUM + 1]; -static int tx_chan_list[TX_CHAN_NUM + 1]; -static u32 comb_isr_mask[CHAN_TOTAL_NUM]; - -static inline int is_rx_chan(int chan_no) -/*judge if this is an rx channel*/ -{ - int result = 0; - if (chan_no < RX_CHAN_NUM) - result = 1; - return result; -} - -/* Ugly, Channel ON register is badly mapped to channel no. */ -static u8 ch_on_mapping[CHAN_TOTAL_NUM] = - { 0, 1, 2, 3, 6, 7, 10, 4, 5, 8, 9, 11 }; - -/* Brief: check wether the chan_no is legal - * Parameter: chan_no: logical channel number - * Return: 0 if is not valid - * 1 if is valid - */ -static inline int is_valid_dma_ch(int chan_no) -{ - return ((chan_no >= 0) && (chan_no < CHAN_TOTAL_NUM)); -} - -/* Brief: check whether a channel is open through Channel ON register - * Parameter: chan_no: logical channel number - * Return: 1 channel is open - * 0 not yet - * EINVAL: invalid parameter - */ -static inline int is_channel_open(int chan_no) -{ - return (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) & - (1 << ch_on_mapping[chan_no])); -} - -/* Brief: add a list entry - * Description: - * always add to the tail and no redundancy allowed. (i.e. entries are unique) - * 0 : entry deleted - * <0 : not deleted (due to not unique) - */ -static inline int _add_list_entry(int *list, int size_of_list, int entry) -{ - int i; - for (i = 0; i < size_of_list; i++) { - if (list[i] == entry) - break; - if (list[i] < 0) { - list[i] = entry; - return 0; - } - } - return -1; -} - -/* Brief: delete a list entry - * Description: - * find the entry and remove it. shift all entries behind it one step forward if necessary\ - * Return: - * 0 : entry deleted - * <0 : not deleted (due to not found?) - */ -static inline int _delete_list_entry(int *list, int size_of_list, - int entry) -{ - int i, j; - for (i = 0; i < size_of_list; i++) { - if (list[i] == entry) { - for (j = i; j < size_of_list; j++) { - list[j] = list[j + 1]; - if (list[j + 1] < 0) { - break; - } - } - return 0; - } - } - return -1; -} - -/* Brief: enable a channel through Channel ON register - * Parameter: chan_no: logical channel number - * Description: - * Please don't open a channel without a valid descriptor (hardware pitfall) - */ -static inline void open_channel(int chan_no) -{ - AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]); - if (is_rx_chan(chan_no)) { - if (_add_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) { - rx_chan_list_len++; - } else { - AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no); - } - } else { - if (_add_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) { - tx_chan_list_len++; - } else { - AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no); - } - } -} - -/* Brief: disable a channel through Channel ON register - * Parameter: chan_no: logical channel number - */ - -static inline void close_channel(int chan_no) -{ - AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]); - if (is_rx_chan(chan_no)) { - if (_delete_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) { - rx_chan_list_len--; - } else { - AMAZON_DMA_DMSG("cannot remove chan %d from open list \n", - chan_no); - } - } else { - if (_delete_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) { - tx_chan_list_len--; - } else { - AMAZON_DMA_DMSG("cannot remove chan %d from open list \n", - chan_no); - } - } -} - -/* Brief: clear RX interrupt - */ -inline void rx_chan_clear_isr(int chan_no) -{ -#ifdef DMA_NO_POLLING - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = - (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | DMA_ISR_CMDCPT - | DMA_ISR_DURR)); -#else - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = - (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | - DMA_ISR_CMDCPT)); -#endif -} - - -/* Brief: hacking function, this will reset all descriptors back to DMA - */ -static void dma_reset_all_descriptors(int chan_no) -{ - volatile struct rx_desc *rx_desc_p = NULL; - int i; - rx_desc_p = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base; - for (i = 0; i < g_log_chan[chan_no].desc_len; i++) { - rx_desc_p->status.word &= - (~(DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | DMA_DESC_CPT_SET)); - rx_desc_p->status.word |= - (DMA_DESC_OWN_DMA | g_log_chan[chan_no].packet_size); - rx_desc_p++; - } -} - -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY -/* Brief: Reset DMA descriptors - */ -static void amazon_dma_reset_tpe_rx(int chan_no) -{ - struct tx_desc *tx_desc_p = NULL; - int j, i = 0; - - // wait until all TX channels stop transmitting - for (j = 9; j <= 10; j++) { - tx_desc_p = - (struct tx_desc *) g_desc_list + - g_log_chan[j].offset_from_base; - for (i = 0; i < g_log_chan[j].desc_len; i++) { - while ((tx_desc_p->status.field.OWN != CPU_OWN)) { - AMAZON_DMA_DMSG("DMA TX in progress\n"); // 000004:fchang - udelay(100); - } - tx_desc_p++; - } - } - - if (tpe_reset) { - total_dma_tpe_reset++; - AMAZON_DMA_DMSG - ("\n===============resetting TPE========================== \n"); - if ((*tpe_reset) ()) { - panic("cannot reset TPE engien\n"); // 000004:fchang - } - } else { - panic("no tpe_reset function\n"); // 000004:fchang - return; - } - dma_reset_all_descriptors(chan_no); - rx_chan_clear_isr(chan_no); - mb(); - - // send EoP - if (tpe_inject) { - if ((*tpe_inject) ()) { - panic("cannot inject a cell\n"); // 000004:fchang - } - } else { - AMAZON_DMA_EMSG("no tpe_inject function\n"); - return; - } - mb(); - while (1) { - if (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT)) { - rx_chan_clear_isr(chan_no); - mb(); - dma_reset_all_descriptors(chan_no); - if (g_log_chan[chan_no].current_desc == - (g_log_chan[chan_no].desc_len - 1)) { - g_log_chan[chan_no].current_desc = 0; - } else { - g_log_chan[chan_no].current_desc++; - } - break; - } - mdelay(1); - } - mb(); -#if 0 - AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]); - while (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) & - (1 << ch_on_mapping[chan_no])) { - printk("TPE channel still on\n"); - mdelay(1); - } - - // AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = (1<current_rx_chan = - chan_no - g_log_chan[chan_no].dma_dev->logic_rx_chan_base; - - // workaround for DMA pitfall: complete bit set happends before the - // other two bits (own,eop) are ready - if ((rx_desc_p->status.field.EoP != 1) - || (rx_desc_p->status.field.OWN != CPU_OWN) - || (rx_desc_p->status.field.data_length == - g_log_chan[chan_no].packet_size)) { -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY - if (chan_no == 4 || chan_no == 5) { - dma_sync_fails++; - if (dma_sync_fails > MAX_SYNC_FAILS) { - // detect bug - rx_desc_p0 = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base; - rx_desc_p1 = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base + 1; - if ((rx_desc_p0->status.field.OWN == CPU_OWN - && rx_desc_p0->status.field.EoP != 1) - && (rx_desc_p1->status.field.OWN == CPU_OWN - && rx_desc_p1->status.field.EoP != 1)) { - amazon_dma_reset_tpe_rx(chan_no); - dma_sync_fails = 0; - return; - } - dma_sync_fails = 0; - AMAZON_DMA_DMSG("too many times ch:%d\n", chan_no); // 000004:fchang - return; - } - udelay(10); // 000004:fchang - } -#endif // //AMAZON_DMA_TPE_AAL5_RECOVERY - return; - } - - /* inform the upper layer to receive the packet */ - g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, RCV_INT); - /* check the next descriptor, if still contains the incoming packet, - then do not clear the interrupt status */ - rx_desc_p = - (struct rx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base + - g_log_chan[chan_no].current_desc; - if (! - ((rx_desc_p->status.field.OWN == CPU_OWN) - && (rx_desc_p->status.field.C == 1))) { - rx_chan_clear_isr(chan_no); - } -} - - -/* Brief: TX channel interrupt handler - * Parameter: TX channel no - * Description: the interrupt handler for each TX channel - * 1. check all the descripters,if any of them had transmitted a packet, then free buffer - * because we cannot garantee the which one has already transmitted out, we have to go through all the descriptors here - * 2. clear the interrupt status bit - */ -inline void tx_chan_intr_handler(int chan_no) -{ - struct tx_desc *tx_desc_p = NULL; - int i = 0; - - tx_desc_p = - (struct tx_desc *) g_desc_list + - g_log_chan[chan_no].offset_from_base; - - for (i = 0; i < g_log_chan[chan_no].desc_len; i++) { - if ((tx_desc_p->status.field.OWN == CPU_OWN) - && (tx_desc_p->status.field.C == 1)) { - /* if already transmitted, then free the buffer */ - g_log_chan[chan_no]. - buffer_free((u8 *) __va(tx_desc_p->Data_Pointer), - g_log_chan[chan_no].opt[i]); - tx_desc_p->status.field.C = 0; - /* inform the upper layer about the completion of the - transmitted packet, the upper layer may want to free the - packet */ - g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, - TRANSMIT_CPT_INT); - } - tx_desc_p++; - } - - /* after all these operations, clear the interrupt status bit */ - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = - (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | - DMA_ISR_CMDCPT)); -} - -/* Brief: DMA interrupt handler - */ -static irqreturn_t dma_interrupt(int irq, void *dev_id) -{ - int i = 0; - int chan_no; - u32 isr = 0; -#ifdef NO_TX_INT // 000004:fchang - static int cnt = 0; // 000004:fchang -#endif // 000004:fchang - while ((isr = - AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)) & (COMB_ISR_RX_MASK | - COMB_ISR_TX_MASK)) { - if (isr & COMB_ISR_RX_MASK) { - // RX Channels: start WFQ algorithm - chan_no = CHAN_TOTAL_NUM; - for (i = 0; i < RX_CHAN_NUM; i++) { - if ((isr & (comb_isr_mask[i])) - && (g_log_chan[i].weight > 0)) { - if (g_log_chan[chan_no].weight < g_log_chan[i].weight) { - chan_no = i; - } - } - } - if (chan_no < CHAN_TOTAL_NUM) { - rx_chan_intr_handler(chan_no); - } else { - for (i = 0; i < RX_CHAN_NUM; i++) { - g_log_chan[i].weight = g_log_chan[i].default_weight; - } - } - } -#ifdef NO_TX_INT - cnt++; - if (cnt == 10) { - cnt = 0; - for (i = 0; i < tx_chan_list_len; i++) { - if (AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - tx_chan_list[i] * - AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP)) { - tx_chan_intr_handler(tx_chan_list[i]); - } - } - } -#else - if (isr & COMB_ISR_TX_MASK) { - // TX channels: RR - for (i = 0; i < tx_chan_list_len; i++) { - if (isr & (comb_isr_mask[tx_chan_list[i]])) { - tx_chan_intr_handler(tx_chan_list[i]); - } - } - } -#endif - } // while - return IRQ_HANDLED; -} - - -/* Brief: read a packet from DMA RX channel - * Parameter: - * Return: packet length - * Description: - * This is called back in a context of DMA interrupt - * 1. prepare new descriptor - * 2. read data - * 3. update WFQ weight - */ -//507261:tc.chen int dma_device_read(struct dma_device_info* dma_dev, u8** dataptr, void** opt) -int asmlinkage dma_device_read(struct dma_device_info *dma_dev, - u8 ** dataptr, void **opt) -{ - u8 *buf; - int len; - int chan_no = 0; - int byte_offset = 0; - - struct rx_desc *rx_desc_p; - void *p = NULL; - int current_desc; - - chan_no = dma_dev->logic_rx_chan_base + dma_dev->current_rx_chan; - current_desc = g_log_chan[chan_no].current_desc; - rx_desc_p = - (struct rx_desc *) (g_desc_list + - g_log_chan[chan_no].offset_from_base + - current_desc); - buf = (u8 *) __va(rx_desc_p->Data_Pointer); /* extract the virtual - address of the data - pointer */ - len = rx_desc_p->status.field.data_length; /* extract the data length */ -#ifndef CONFIG_MIPS_UNCACHED - dma_cache_inv((unsigned long) buf, len); -#endif // CONFIG_MIPS_UNCACHED - *(u32 *) dataptr = (u32) buf; - if (opt) { - *(int *) opt = (int) g_log_chan[chan_no].opt[current_desc]; /* read - out - the - opt - information */ - } - - buf = - (u8 *) g_log_chan[chan_no].buffer_alloc(g_log_chan[chan_no]. - packet_size, &byte_offset, - &p); - // should check null!!!! - if (buf == NULL || p == NULL) { - *(u32 *) dataptr = 0; - *(int *) opt = 0; - len = 0; - } else { - g_log_chan[chan_no].opt[current_desc] = p; - /* reduce the weight for WFQ algorithm */ - g_log_chan[chan_no].weight -= len; - rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf); - } - if (current_desc == g_log_chan[chan_no].desc_len - 1) { - current_desc = 0; - } else { - current_desc++; - } - g_log_chan[chan_no].current_desc = current_desc; - - rx_desc_p->status.word = DMA_DESC_OWN_DMA - | (byte_offset << DMA_DESC_BYTEOFF_SHIFT) - | g_log_chan[chan_no].packet_size; - return len; -} - -/* Brief: write a packet through DMA RX channel to peripheral - * Parameter: - * Return: packet length - * Description: - * - */ -u64 dma_tx_drop = 0; -//507261:tc.chen int dma_device_write(struct dma_device_info* dma_dev, u8* dataptr, int len,void* opt) -int asmlinkage dma_device_write(struct dma_device_info *dma_dev, - u8 * dataptr, int len, void *opt) -{ - int chan_no = 0; - struct tx_desc *tx_desc_p; - - int byte_offset = 0; - int current_desc; - static int cnt = 0; // 000004:fchang - - unsigned long flag; - local_irq_save(flag); - - chan_no = dma_dev->logic_tx_chan_base + dma_dev->current_tx_chan; - current_desc = g_log_chan[chan_no].current_desc; - tx_desc_p = - (struct tx_desc *) (g_desc_list + - g_log_chan[chan_no].offset_from_base + - current_desc); - // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){ - if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen - AMAZON_DMA_DMSG("no TX desc for CPU, drop packet\n"); - dma_tx_drop++; - g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT); - local_irq_restore(flag); - return 0; - } - g_log_chan[chan_no].opt[current_desc] = opt; - - /* byte offset----to adjust the starting address of the data buffer, - should be multiple of the burst length. */ - byte_offset = - ((u32) CPHYSADDR((u32) dataptr)) % (g_log_chan[chan_no].burst_len * - 4); -#ifndef CONFIG_MIPS_UNCACHED - dma_cache_wback((unsigned long) dataptr, len); - wmb(); -#endif // CONFIG_MIPS_UNCACHED - - tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset; - wmb(); - tx_desc_p->status.word = DMA_DESC_OWN_DMA - | DMA_DESC_SOP_SET - | DMA_DESC_EOP_SET | (byte_offset << DMA_DESC_BYTEOFF_SHIFT) - | len; - wmb(); - if (is_channel_open(chan_no) == 0) { - // turn on if necessary - open_channel(chan_no); - } -#ifdef DMA_NO_POLLING - if ((AMAZON_DMA_REG32 - (AMAZON_DMA_CH0_ISR + - chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_DURR | DMA_ISR_CPT)) == - (DMA_ISR_DURR)) { - // clear DURR if (CPT is AND set and DURR is set) - AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + - chan_no * AMAZON_DMA_CH_STEP) = DMA_ISR_DURR; - } -#endif - - if (current_desc == (g_log_chan[chan_no].desc_len - 1)) { - current_desc = 0; - } else { - current_desc++; - } - - - g_log_chan[chan_no].current_desc = current_desc; - tx_desc_p = - (struct tx_desc *) (g_desc_list + - g_log_chan[chan_no].offset_from_base + - current_desc); - // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){ - if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen - g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT); - } -#ifdef NO_TX_INT -//000004:fchang Start - cnt++; - if (cnt == 5) { - cnt = 0; - tx_chan_intr_handler(chan_no); - } -//000004:fchang End -#endif - local_irq_restore(flag); // 000004:fchang - return len; -} - - - -int desc_list_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int i; - u32 *p = (u32 *) g_desc_list; - int len = 0; - len += sprintf(buf + len, "descriptor list:\n"); - for (i = 0; i < 120; i++) { - len += sprintf(buf + len, "%d\n", i); - len += sprintf(buf + len, "%08x\n", *(p + i * 2 + 1)); - len += sprintf(buf + len, "%08x\n", *(p + i * 2)); - - } - - return len; - -} - -int channel_weight_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - - // int i=0; - int len = 0; - len += sprintf(buf + len, "Qos dma channel weight list\n"); - len += - sprintf(buf + len, - "channel_num default_weight current_weight device Tx/Rx\n"); - len += - sprintf(buf + len, - " 0 %08x %08x Switch Rx0\n", - g_log_chan[0].default_weight, g_log_chan[0].weight); - len += - sprintf(buf + len, - " 1 %08x %08x Switch Rx1\n", - g_log_chan[1].default_weight, g_log_chan[1].weight); - len += - sprintf(buf + len, - " 2 %08x %08x Switch Rx2\n", - g_log_chan[2].default_weight, g_log_chan[2].weight); - len += - sprintf(buf + len, - " 3 %08x %08x Switch Rx3\n", - g_log_chan[3].default_weight, g_log_chan[3].weight); - len += - sprintf(buf + len, - " 4 %08x %08x Switch Tx0\n", - g_log_chan[4].default_weight, g_log_chan[4].weight); - len += - sprintf(buf + len, - " 5 %08x %08x Switch Tx1\n", - g_log_chan[5].default_weight, g_log_chan[5].weight); - /* - len+=sprintf(buf+len," 6 %08x %08x TPE - Rx0\n",g_log_chan[6].default_weight, g_log_chan[6].weight); - len+=sprintf(buf+len," 7 %08x %08x TPE - Rx0\n",g_log_chan[7].default_weight, g_log_chan[7].weight); - len+=sprintf(buf+len," 8 %08x %08x TPE - Tx0\n",g_log_chan[8].default_weight, g_log_chan[8].weight); - len+=sprintf(buf+len," 9 %08x %08x TPE - Rx0\n",g_log_chan[9].default_weight, g_log_chan[9].weight); - len+=sprintf(buf+len," 10 %08x %08x DPLUS - Rx0\n",g_log_chan[10].default_weight, g_log_chan[10].weight); - len+=sprintf(buf+len," 11 %08x %08x DPLUS - Rx0\n",g_log_chan[11].default_weight, g_log_chan[11].weight); */ - return len; -} - -int dma_register_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - dev_list *temp_dev; - int len = 0;; - - len += sprintf(buf + len, "amazon dma driver\n"); - len += sprintf(buf + len, "version 1.0\n"); - len += sprintf(buf + len, "devices registered:\n"); - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - len += sprintf(buf + len, "%s ", temp_dev->dev->device_name); - } - len += sprintf(buf + len, "\n"); - len += sprintf(buf + len, "CH_ON=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_ON)); - len += sprintf(buf + len, "CH_RST=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_RST)); - len += sprintf(buf + len, "CH0_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR)); - len += sprintf(buf + len, "CH1_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH1_ISR)); - len += sprintf(buf + len, "CH2_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH2_ISR)); - len += sprintf(buf + len, "CH3_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH3_ISR)); - len += sprintf(buf + len, "CH4_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH4_ISR)); - len += sprintf(buf + len, "CH5_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH5_ISR)); - len += sprintf(buf + len, "CH6_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH6_ISR)); - len += sprintf(buf + len, "CH7_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH7_ISR)); - len += sprintf(buf + len, "CH8_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_ISR)); - len += - sprintf(buf + len, "CH9_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_ISR)); - len += - sprintf(buf + len, "CH10_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_ISR)); - len += - sprintf(buf + len, "CH11_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_ISR)); - len += - sprintf(buf + len, "LCH0_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK)); - len += - sprintf(buf + len, "LCH1_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH1_MSK)); - len += - sprintf(buf + len, "LCH2_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH2_MSK)); - len += - sprintf(buf + len, "LCH3_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH3_MSK)); - len += - sprintf(buf + len, "LCH4_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH4_MSK)); - len += - sprintf(buf + len, "LCH5_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH5_MSK)); - len += - sprintf(buf + len, "LCH6_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH6_MSK)); - len += - sprintf(buf + len, "LCH7_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH7_MSK)); - len += - sprintf(buf + len, "LCH8_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_MSK)); - len += - sprintf(buf + len, "LCH9_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_MSK)); - len += - sprintf(buf + len, "LCH10_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_MSK)); - len += - sprintf(buf + len, "LCH11_MSK=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_MSK)); - len += - sprintf(buf + len, "Desc_BA=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA)); - len += - sprintf(buf + len, "LCH0_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN)); - len += - sprintf(buf + len, "LCH1_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_LEN)); - len += - sprintf(buf + len, "LCH2_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_LEN)); - len += - sprintf(buf + len, "LCH3_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_LEN)); - len += - sprintf(buf + len, "LCH4_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_LEN)); - len += - sprintf(buf + len, "LCH5_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_LEN)); - len += - sprintf(buf + len, "LCH6_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_LEN)); - len += - sprintf(buf + len, "LCH7_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_LEN)); - len += - sprintf(buf + len, "LCH8_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_LEN)); - len += - sprintf(buf + len, "LCH9_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_LEN)); - len += - sprintf(buf + len, "LCH10_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_LEN)); - len += - sprintf(buf + len, "LCH11_DES_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_LEN)); - len += - sprintf(buf + len, "LCH1_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST)); - len += - sprintf(buf + len, "LCH2_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_OFST)); - len += - sprintf(buf + len, "LCH3_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_OFST)); - len += - sprintf(buf + len, "LCH4_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_OFST)); - len += - sprintf(buf + len, "LCH5_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_OFST)); - len += - sprintf(buf + len, "LCH6_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_OFST)); - len += - sprintf(buf + len, "LCH7_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_OFST)); - len += - sprintf(buf + len, "LCH8_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_OFST)); - len += - sprintf(buf + len, "LCH9_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_OFST)); - len += - sprintf(buf + len, "LCH10_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_OFST)); - len += - sprintf(buf + len, "LCH11_DES_OFST=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_OFST)); - len += - sprintf(buf + len, "AMAZON_DMA_SW_BL=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_SW_BL)); - len += - sprintf(buf + len, "AMAZON_DMA_TPE_BL=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_TPE_BL)); - len += - sprintf(buf + len, "DPlus2FPI_BL=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_DPlus2FPI_BL)); - len += - sprintf(buf + len, "GRX_BUF_LEN=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN)); - len += - sprintf(buf + len, "DMA_ECON_REG=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG)); - len += - sprintf(buf + len, "POLLING_REG=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG)); - len += - sprintf(buf + len, "CH_WGT=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_CH_WGT)); - len += - sprintf(buf + len, "TX_WGT=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_TX_WGT)); - len += - sprintf(buf + len, "DPlus2FPI_CLASS=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_DPLus2FPI_CLASS)); - len += - sprintf(buf + len, "COMB_ISR=%08x\n", - AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)); -#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY - len += sprintf(buf + len, "TPE fails:%u\n", total_dma_tpe_reset); // 000004:fchang -#endif - return len; -} - -/* Brief: initialize DMA registers - * Description: - */ -static void dma_chip_init(void) -{ - int i; - for (i = 0; i < CHAN_TOTAL_NUM; i++) { - AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST + - i * AMAZON_DMA_CH_STEP) = DEFAULT_OFFSET; - } -#ifdef DMA_NO_POLLING - AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = 0; -#else - // enable poll mode and set polling counter - AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = DMA_POLLING_CNT | DMA_POLLING_ENABLE; -#endif - // to enable DMA drop - AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN) = 0x10000; -} - -int insert_dev_list(dev_list * dev) -{ - dev_list *temp_dev; - if (g_head_dev == NULL) { - g_head_dev = dev; - g_tail_dev = dev; - dev->prev = NULL; - dev->next = NULL; - } else { - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - if (temp_dev->weight < dev->weight) { - if (temp_dev->prev) - temp_dev->prev->next = dev; - - dev->prev = temp_dev->prev; - dev->next = temp_dev; - temp_dev->prev = dev; - if (temp_dev == g_head_dev) - g_head_dev = dev; - break; - } - } - - if (!temp_dev) { - g_tail_dev->next = dev; - dev->prev = g_tail_dev; - dev->next = NULL; - g_tail_dev = dev; - } - - } - - return 1; -} - -u8 *common_buffer_alloc(int len, int *byte_offset, void **opt) -{ - u8 *buffer = (u8 *) kmalloc(len * sizeof(u8), GFP_KERNEL); - *byte_offset = 0; - return buffer; - -} - -int common_buffer_free(u8 * dataptr, void *opt) -{ - if (dataptr) - kfree(dataptr); - return 0; -} - - -int register_dev(struct dma_device_info *dma_dev) -{ - int i, j, temp; - int burst_reg = 0; - u8 *buffer; - void *p = NULL; - int byte_offset = 0; - - struct rx_desc *rx_desc_p; - struct tx_desc *tx_desc_p; - if (strcmp(dma_dev->device_name, "switch1") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH1_RST_MASK; // resest - // channel - // 1st - AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian - // conversion - // for Switch - burst_reg = AMAZON_DMA_SW_BL; - dma_dev->logic_rx_chan_base = switch_rx_chan_base; - dma_dev->logic_tx_chan_base = switch_tx_chan_base; - } - - else if (strcmp(dma_dev->device_name, "switch2") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH2_RST_MASK; // resest - // channel - // 1st - AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian - // conversion - // for Switch - burst_reg = AMAZON_DMA_SW_BL; - dma_dev->logic_rx_chan_base = switch2_rx_chan_base; - dma_dev->logic_tx_chan_base = switch2_tx_chan_base; - - } else if (strcmp(dma_dev->device_name, "TPE") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = TPE_RST_MASK; // resest - // channel 1st - // - burst_reg = AMAZON_DMA_TPE_BL; - dma_dev->logic_rx_chan_base = TPE_rx_chan_base; - dma_dev->logic_tx_chan_base = TPE_tx_chan_base; - } - - else if (strcmp(dma_dev->device_name, "DPlus") == 0) { - AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = DPlus2FPI_RST_MASK; // resest - // channel - // 1st - dma_dev->logic_rx_chan_base = DPLus2FPI_rx_chan_base; - dma_dev->logic_tx_chan_base = DPLus2FPI_tx_chan_base; - - } - - i = 0; - for (temp = dma_dev->tx_burst_len; temp > 2; temp /= 2) { - i += 1; - } - - - AMAZON_DMA_REG32(burst_reg) = i << 1; - i = 0; - for (temp = dma_dev->rx_burst_len; temp > 2; temp /= 2) { - i += 1; - } - AMAZON_DMA_REG32(burst_reg) += i; - - for (i = 0; i < dma_dev->num_rx_chan; i++) { - - temp = dma_dev->logic_rx_chan_base + i; - g_log_chan[temp].dma_dev = dma_dev; - g_log_chan[temp].weight = dma_dev->rx_chan[i].weight; - g_log_chan[temp].default_weight = dma_dev->rx_chan[i].weight; - g_log_chan[temp].current_desc = 0; - g_log_chan[temp].desc_ofst = DEFAULT_OFFSET; - g_log_chan[temp].desc_len = dma_dev->rx_chan[i].desc_num; - g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET; - g_log_chan[temp].packet_size = dma_dev->rx_chan[i].packet_size; - - AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->rx_chan[i].desc_num; - // enable interrupt mask - if (temp == 4 || temp == 5) { - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x32; - } else { - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36; - } - strcpy(g_log_chan[temp].device_name, dma_dev->device_name); - g_log_chan[temp].burst_len = dma_dev->rx_burst_len; - g_log_chan[temp].control = dma_dev->rx_chan[i].control; - - - /* specify the buffer allocation and free method */ - if (dma_dev->buffer_alloc) - g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc; - else - g_log_chan[temp].buffer_alloc = common_buffer_alloc; - - if (dma_dev->buffer_free) - g_log_chan[temp].buffer_free = dma_dev->buffer_free; - else - g_log_chan[temp].buffer_free = common_buffer_free; - - if (dma_dev->intr_handler) - g_log_chan[temp].intr_handler = dma_dev->intr_handler; - else - g_log_chan[temp].intr_handler = NULL; - - for (j = 0; j < g_log_chan[temp].desc_len; j++) { - rx_desc_p = (struct rx_desc *) (g_desc_list + g_log_chan[temp].offset_from_base + j); - rx_desc_p->status.word = 0; - rx_desc_p->status.field.data_length = g_log_chan[temp].packet_size; - buffer = (u8 *) g_log_chan[temp].buffer_alloc(g_log_chan[temp].packet_size, &byte_offset, &p); - rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buffer); - rx_desc_p->status.field.byte_offset = byte_offset; - /* fix me, should check if the addresss comply with the burst - lenght requirment */ - g_log_chan[temp].opt[j] = p; - rx_desc_p->status.field.OWN = DMA_OWN; - - } - /* open or close the channel */ - if (g_log_chan[temp].control) - open_channel(temp); - else - close_channel(temp); - } - - for (i = 0; i < dma_dev->num_tx_chan; i++) { - temp = dma_dev->logic_tx_chan_base + i; - g_log_chan[temp].dma_dev = dma_dev; - g_log_chan[temp].weight = dma_dev->tx_chan[i].weight; - g_log_chan[temp].default_weight = dma_dev->tx_chan[i].weight; - g_log_chan[temp].current_desc = 0; - g_log_chan[temp].desc_ofst = DEFAULT_OFFSET; - g_log_chan[temp].desc_len = dma_dev->tx_chan[i].desc_num; - g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET; - g_log_chan[temp].packet_size = dma_dev->tx_chan[i].packet_size; - - AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->tx_chan[i].desc_num; - // enable interrupt mask -#ifdef NO_TX_INT - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x3e; -#else - AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36; -#endif - - strcpy(g_log_chan[temp].device_name, dma_dev->device_name); - g_log_chan[temp].burst_len = dma_dev->tx_burst_len; - g_log_chan[temp].control = dma_dev->tx_chan[i].control; - - if (dma_dev->buffer_alloc) - g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc; - else - g_log_chan[temp].buffer_alloc = common_buffer_alloc; - - if (dma_dev->buffer_free) - g_log_chan[temp].buffer_free = dma_dev->buffer_free; - else - g_log_chan[temp].buffer_free = common_buffer_free; - - if (dma_dev->intr_handler) - g_log_chan[temp].intr_handler = dma_dev->intr_handler; - else - g_log_chan[temp].intr_handler = NULL; - - for (j = 0; j < g_log_chan[temp].desc_len; j++) { - - tx_desc_p = - (struct tx_desc *) (g_desc_list + - g_log_chan[temp].offset_from_base + j); - tx_desc_p->status.word = 0; - tx_desc_p->status.field.data_length = - g_log_chan[temp].packet_size; - tx_desc_p->status.field.OWN = CPU_OWN; - - } - /* workaround DMA pitfall, we never turn on channel if we don't - have proper descriptors */ - if (!g_log_chan[temp].control) { - close_channel(temp); - } - - } - - return 0; -} - -int dma_device_register(struct dma_device_info *dma_dev) -{ - dev_list *temp_dev; - temp_dev = (dev_list *) kmalloc(sizeof(dev_list), GFP_KERNEL); - temp_dev->dev = dma_dev; - temp_dev->weight = dma_dev->weight; - insert_dev_list(temp_dev); - /* check whether this is a known device */ - if ((strcmp(dma_dev->device_name, "switch1") == 0) - || (strcmp(dma_dev->device_name, "TPE") == 0) - || (strcmp(dma_dev->device_name, "switch2") == 0) - || (strcmp(dma_dev->device_name, "DPlus") == 0)) { - register_dev(dma_dev); - } - - return 0; -} - - -int unregister_dev(struct dma_device_info *dma_dev) -{ - int i, j, temp; - u8 *buffer; - struct rx_desc *rx_desc_p; - - for (i = 0; i < dma_dev->num_rx_chan; i++) { - temp = dma_dev->logic_rx_chan_base + i; - close_channel(temp); - for (j = 0; j < g_log_chan[temp].desc_len; j++) { - rx_desc_p = - (struct rx_desc *) (g_desc_list + - g_log_chan[temp].offset_from_base + j); - buffer = (u8 *) __va(rx_desc_p->Data_Pointer); - g_log_chan[temp].buffer_free(buffer, g_log_chan[temp].opt[j]); - } - } - for (i = 0; i < dma_dev->num_tx_chan; i++) { - temp = dma_dev->logic_tx_chan_base + i; - close_channel(temp); - } - return 0; -} - -int dma_device_unregister(struct dma_device_info *dev) -{ - dev_list *temp_dev; - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - if (strcmp(dev->device_name, temp_dev->dev->device_name) == 0) { - if ((strcmp(dev->device_name, "switch1") == 0) - || (strcmp(dev->device_name, "TPE") == 0) - || (strcmp(dev->device_name, "switch2") == 0) - || (strcmp(dev->device_name, "DPlus") == 0)) - unregister_dev(dev); - if (temp_dev == g_head_dev) { - g_head_dev = temp_dev->next; - kfree(temp_dev); - } else { - if (temp_dev == g_tail_dev) - g_tail_dev = temp_dev->prev; - if (temp_dev->prev) - temp_dev->prev->next = temp_dev->next; - if (temp_dev->next) - temp_dev->next->prev = temp_dev->prev; - kfree(temp_dev); - } - break; - } - - } - return 0; -} - -void dma_device_update_rx(struct dma_device_info *dma_dev) -{ - int i, temp; - for (i = 0; i < dma_dev->num_rx_chan; i++) { - temp = dma_dev->logic_rx_chan_base + i; - g_log_chan[temp].control = dma_dev->rx_chan[i].control; - - if (g_log_chan[temp].control) - open_channel(temp); - else - close_channel(temp); - } - -} - -void dma_device_update_tx(struct dma_device_info *dma_dev) -{ - int i, temp; - for (i = 0; i < dma_dev->num_tx_chan; i++) { - temp = dma_dev->logic_tx_chan_base + i; - g_log_chan[temp].control = dma_dev->tx_chan[i].control; - if (g_log_chan[temp].control) { - /* we turn on channel when send out the very first packet */ - // open_channel(temp); - } else - close_channel(temp); - } -} - -int dma_device_update(struct dma_device_info *dma_dev) -{ - dma_device_update_rx(dma_dev); - dma_device_update_tx(dma_dev); - return 0; -} - -static int dma_open(struct inode *inode, struct file *file) -{ - return 0; -} - -static int dma_release(struct inode *inode, struct file *file) -{ - /* release the resources */ - return 0; -} - -static int dma_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -{ - int value = 0; - int result = 0; - int chan_no = 0; - - switch (cmd) { - case 0: /* get register value */ - break; - case 1: /* return channel weight */ - chan_no = *((int *) arg); - *((int *) arg + 1) = g_log_chan[chan_no].default_weight; - break; - case 2: /* set channel weight */ - chan_no = *((int *) arg); - value = *((int *) arg + 1); - printk("new weight=%08x\n", value); - g_log_chan[chan_no].default_weight = value; - break; - default: - break; - } - return result; -} - - -static struct file_operations dma_fops = { - owner:THIS_MODULE, - open:dma_open, - release:dma_release, - ioctl:dma_ioctl, -}; - -static int dma_init(void) -{ - int result = 0; - int i; - printk("initialising dma core\n"); - result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops); - if (result) { - AMAZON_DMA_EMSG("cannot register device dma-core!\n"); - return result; - } - result = request_irq(AMAZON_DMA_INT, dma_interrupt, SA_INTERRUPT, "dma-core", (void *) &dma_interrupt); - if (result) { - AMAZON_DMA_EMSG("error, cannot get dma_irq!\n"); - free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt); - return -EFAULT; - } - - g_desc_list = (u64 *) KSEG1ADDR(__get_free_page(GFP_DMA)); - - if (g_desc_list == NULL) { - AMAZON_DMA_EMSG("no memory for desriptor\n"); - return -ENOMEM; - } - memset(g_desc_list, 0, PAGE_SIZE); - AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA) = (u32) CPHYSADDR((u32) g_desc_list); - g_amazon_dma_dir = proc_mkdir("amazon_dma", NULL); - create_proc_read_entry("dma_register", 0, g_amazon_dma_dir, dma_register_proc_read, NULL); - create_proc_read_entry("g_desc_list", 0, g_amazon_dma_dir, desc_list_proc_read, NULL); - create_proc_read_entry("channel_weight", 0, g_amazon_dma_dir, channel_weight_proc_read, NULL); - - dma_chip_init(); - for (i = 0; i < (RX_CHAN_NUM + 1); i++) { - rx_chan_list[i] = -1; - } - for (i = 0; i < (TX_CHAN_NUM + 1); i++) { - tx_chan_list[i] = -1; - } - - for (i = 0; i < CHAN_TOTAL_NUM; i++) { - comb_isr_mask[i] = 0x80000000 >> (i); - } - - g_log_chan[CHAN_TOTAL_NUM].weight = 0; - printk("initialising dma core ... done\n"); - - return 0; -} - -arch_initcall(dma_init); - - -void dma_cleanup(void) -{ - dev_list *temp_dev; - - unregister_chrdev(DMA_MAJOR, "dma-core"); - for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { - kfree(temp_dev); - } - free_page(KSEG0ADDR((unsigned long) g_desc_list)); - remove_proc_entry("channel_weight", g_amazon_dma_dir); - remove_proc_entry("dma_list", g_amazon_dma_dir); - remove_proc_entry("dma_register", g_amazon_dma_dir); - remove_proc_entry("amazon_dma", NULL); - /* release the resources */ - free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt); -} - -EXPORT_SYMBOL(dma_device_register); -EXPORT_SYMBOL(dma_device_unregister); -EXPORT_SYMBOL(dma_device_read); -EXPORT_SYMBOL(dma_device_write); -EXPORT_SYMBOL(dma_device_update); -EXPORT_SYMBOL(dma_device_update_rx); - -MODULE_LICENSE("GPL"); diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.h b/target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.h deleted file mode 100644 index cb3d456c95..0000000000 --- a/target/linux/amazon-2.6/files/arch/mips/amazon/dma-core.h +++ /dev/null @@ -1,69 +0,0 @@ -#ifndef DMA_CORE_H -#define DMA_CORE_H - -#define AMAZON_DMA_REG32(reg_num) *((volatile u32*)(reg_num)) -#define AMAZON_DMA_CH_STEP 4 - -#define COMB_ISR_RX_MASK 0xfe000000 -#define COMB_ISR_TX_MASK 0x01f00000 - - -#define DMA_OWN 1 -#define CPU_OWN 0 -#define DMA_MAJOR 250 - -//Descriptors -#define DMA_DESC_OWN_CPU 0x0 -#define DMA_DESC_OWN_DMA 0x80000000 -#define DMA_DESC_CPT_SET 0x40000000 -#define DMA_DESC_SOP_SET 0x20000000 -#define DMA_DESC_EOP_SET 0x10000000 - -#define switch_rx_chan_base 0 -#define switch_tx_chan_base 7 -#define switch2_rx_chan_base 2 -#define switch2_tx_chan_base 8 -#define TPE_rx_chan_base 4 -#define TPE_tx_chan_base 9 -#define DPLus2FPI_rx_chan_base 6 -#define DPLus2FPI_tx_chan_base 11 - -#define RX_CHAN_NUM 7 -#define TX_CHAN_NUM 5 -#define CHAN_TOTAL_NUM (RX_CHAN_NUM+TX_CHAN_NUM) -#define DEFAULT_OFFSET 20 -#define DESCRIPTOR_SIZE 8 - -typedef struct dev_list{ - struct dma_device_info* dev; - int weight; - struct dev_list* prev; - struct dev_list* next; -}dev_list; - -typedef struct channel_info{ - char device_name[16]; - int occupied; - enum attr_t attr; - int current_desc; - int weight; - int default_weight; - int desc_num; - int burst_len; - int desc_len; - int desc_ofst; - int packet_size; - int offset_from_base; - int control; - void* opt[DEFAULT_OFFSET]; - u8* (*buffer_alloc)(int len,int* offset, void** opt); - int (*buffer_free)(u8* dataptr,void* opt); - int (*intr_handler)(struct dma_device_info* info,int status); - - struct dma_device_info* dma_dev; -}channel_info; - - - -#endif - diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/interrupt.c b/target/linux/amazon-2.6/files/arch/mips/amazon/interrupt.c deleted file mode 100644 index 5e34e0577b..0000000000 --- a/target/linux/amazon-2.6/files/arch/mips/amazon/interrupt.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Gary Jennejohn (C) 2003 - * Copyright (C) 2007 Felix Fietkau - * Copyright (C) 2007 John Crispin - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Routines for generic manipulation of the interrupts found on the - * AMAZON boards. - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -static void amazon_disable_irq(unsigned int irq_nr) -{ - int i; - u32 amazon_ier = AMAZON_ICU_IM0_IER; - - if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0) - amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier); - else { - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr <= 31) - amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier); - amazon_ier += 0x10; - irq_nr -= 32; - } - } -} - -static void amazon_mask_and_ack_irq(unsigned int irq_nr) -{ - int i; - u32 amazon_ier = AMAZON_ICU_IM0_IER; - u32 amazon_isr = AMAZON_ICU_IM0_ISR; - - if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0){ - amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier); - amazon_writel(AMAZON_DMA_H_MASK, amazon_isr); - } else { - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr <= 31){ - amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier); - amazon_writel((1 << irq_nr ), amazon_isr); - } - amazon_ier += 0x10; - amazon_isr += 0x10; - irq_nr -= 32; - } - } -} - -static void amazon_enable_irq(unsigned int irq_nr) -{ - int i; - u32 amazon_ier = AMAZON_ICU_IM0_IER; - - if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0) - amazon_writel(amazon_readl(amazon_ier) | AMAZON_DMA_H_MASK, amazon_ier); - else { - irq_nr -= INT_NUM_IRQ0; - for (i = 0; i <= 4; i++) - { - if (irq_nr <= 31) - amazon_writel(amazon_readl(amazon_ier) | (1 << irq_nr ), amazon_ier); - amazon_ier += 0x10; - irq_nr -= 32; - } - } -} - -static unsigned int amazon_startup_irq(unsigned int irq) -{ - amazon_enable_irq(irq); - return 0; -} - -static void amazon_end_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { - amazon_enable_irq(irq); - } -} - -static struct hw_interrupt_type amazon_irq_type = { - "AMAZON", - .startup = amazon_startup_irq, - .enable = amazon_enable_irq, - .disable = amazon_disable_irq, - .unmask = amazon_enable_irq, - .ack = amazon_mask_and_ack_irq, - .mask = amazon_disable_irq, - .mask_ack = amazon_mask_and_ack_irq, - .end = amazon_end_irq -}; - -/* Cascaded interrupts from IM0-4 */ -static inline void amazon_hw_irqdispatch(u8 line) -{ - u32 irq; - - irq = (amazon_readl(AMAZON_ICU_IM_VEC) >> (line * 5)) & AMAZON_ICU_IM0_VEC_MASK; - if (line == 0 && irq <= 11 && irq >= 0) { - //DMA fixed to IM0_IRL0 - irq = 0; - } - do_IRQ(irq + INT_NUM_IRQ0 + (line * 32)); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - if (pending & CAUSEF_IP7){ - do_IRQ(MIPS_CPU_TIMER_IRQ); - goto out; - } else { - unsigned int i; - for (i = 0; i <= 4; i++) - { - if(pending & (CAUSEF_IP2 << i)){ - amazon_hw_irqdispatch(i); - goto out; - } - } - } - printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); -out: - return; -} - -static struct irqaction cascade = { - .handler = no_action, - .flags = SA_INTERRUPT, - .name = "cascade", -}; - -void __init arch_init_irq(void) -{ - int i; - - /* mask all interrupt sources */ - for(i = 0; i <= 4; i++){ - amazon_writel(0, AMAZON_ICU_IM0_IER + (i * 0x10)); - } - - mips_cpu_irq_init(); - - /* set up irq cascade */ - for (i = 2; i <= 6; i++) { - setup_irq(i, &cascade); - } - - for (i = INT_NUM_IRQ0; i <= INT_NUM_IM4_IRL31; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = 0; - irq_desc[i].depth = 1; - set_irq_chip(i, &amazon_irq_type); - } -} diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/pci.c b/target/linux/amazon-2.6/files/arch/mips/amazon/pci.c deleted file mode 100644 index ab305a983c..0000000000 --- a/target/linux/amazon-2.6/files/arch/mips/amazon/pci.c +++ /dev/null @@ -1,293 +0,0 @@ -/* - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. - * Copyright (C) 2007 Felix Fietkau - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ - -/* FIXME: convert nasty volatile register derefs to readl/writel calls */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define AMAZON_PCI_REG32( addr ) (*(volatile u32 *)(addr)) -#ifndef AMAZON_PCI_MEM_BASE -#define AMAZON_PCI_MEM_BASE 0xb2000000 -#endif -#define AMAZON_PCI_MEM_SIZE 0x00400000 -#define AMAZON_PCI_IO_BASE 0xb2400000 -#define AMAZON_PCI_IO_SIZE 0x00002000 - -#define AMAZON_PCI_CFG_BUSNUM_SHF 16 -#define AMAZON_PCI_CFG_DEVNUM_SHF 11 -#define AMAZON_PCI_CFG_FUNNUM_SHF 8 - -#define PCI_ACCESS_READ 0 -#define PCI_ACCESS_WRITE 1 - -static inline u32 amazon_r32(u32 addr) -{ - u32 *ptr = (u32 *) addr; - return __raw_readl(ptr); -} - -static inline void amazon_w32(u32 addr, u32 val) -{ - u32 *ptr = (u32 *) addr; - __raw_writel(val, ptr); -} - - -static struct resource pci_io_resource = { - .name = "io pci IO space", -#if 0 - .start = AMAZON_PCI_IO_BASE, - .end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1, -#endif - .start = 0, - .end = AMAZON_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource pci_mem_resource = { - .name = "ext pci memory space", - .start = AMAZON_PCI_MEM_BASE, - .end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -static inline u32 amazon_pci_swap(u32 val) -{ -#ifdef CONFIG_AMAZON_PCI_HW_SWAP - return swab32(val); -#else - return val; -#endif -} - -static int amazon_pci_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data) -{ - unsigned long flags; - u32 pci_addr; - u32 val; - int ret; - - /* Amazon support slot from 0 to 15 */ - /* devfn 0 & 0x20 is itself */ - if ((bus != 0) || (devfn == 0) || (devfn == 0x20)) - return 1; - - pci_addr=AMAZON_PCI_CFG_BASE | - bus->number << AMAZON_PCI_CFG_BUSNUM_SHF | - devfn << AMAZON_PCI_CFG_FUNNUM_SHF | - (where & ~0x3); - - local_irq_save(flags); - if (access_type == PCI_ACCESS_WRITE) { - val = amazon_pci_swap(*data); - ret = put_dbe(val, (u32 *)pci_addr); - } else { - ret = get_dbe(val, (u32 *)pci_addr); - *data = amazon_pci_swap(val); - } - - amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) & (~(1<> ((where & 3) << 3)) & 0xff; - break; - case 2: - *((u16 *) val) = (data >> ((where & 3) << 3)) & 0xffff; - break; - case 4: - *val = data; - break; - default: - return -1; - } - - return ret; -} - - -static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) -{ - if (size != 4) { - u32 data; - - if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) - return -1; - - if (size == 1) - val = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); - else if (size == 2) - val = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); - else - return -1; - } - - if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) - return -1; - - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops amazon_pci_ops = { - amazon_pci_read, - amazon_pci_write -}; - -static struct pci_controller amazon_pci_controller = { - .pci_ops = &amazon_pci_ops, - .mem_resource = &pci_mem_resource, - .io_resource = &pci_io_resource -}; - -int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -{ - switch (slot) { - case 13: - /* IDSEL = AD29 --> USB Host Controller */ - return INT_NUM_IM2_IRL15; - case 14: - /* IDSEL = AD30 --> mini PCI connector */ - return INT_NUM_IM2_IRL14; - default: - printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin); - return 0; - } -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - switch(dev->irq) { - case INT_NUM_IM2_IRL15: - /* - * IDSEL = AD29 --> USB Host Controller - * PCI_INTA/B/C--GPIO Port0.2--EXIN3 - * IN/ALT0:1 ALT1:0 - * PULL UP - */ - (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb; - (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4; - (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb; - (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 4; - (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4; - //External Interrupt Node - (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */ - (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - break; - case INT_NUM_IM2_IRL14: - /* - * IDSEL = AD30 --> mini PCI connector - * PCI_INTA--GPIO Port0.1--EXIN2 - * IN/ALT0:1 ALT1:0 - * PULL UP - */ - (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd; - (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2; - (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd; - (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 2; - (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2; - //External Interrupt Node - (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600; - (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - break; - default: - return 1; - } - return 0; -} - -int amazon_pci_init(void) -{ - u32 temp_buffer; - -#ifdef CONFIG_AMAZON_PCI_HW_SWAP - AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28); - wmb(); -#endif - - AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1< - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void prom_putchar(char c) -{ - /* Wait for FIFO to empty */ - while ((amazon_readl(AMAZON_ASC_FSTAT) >> 8) != 0x00) ; - /* Crude cr/nl handling is better than none */ - if(c == '\n') - amazon_writel('\r', AMAZON_ASC_TBUF); - amazon_writel(c, AMAZON_ASC_TBUF); -} - -void prom_printf(const char * fmt, ...) -{ - va_list args; - int l; - char *p, *buf_end; - char buf[1024]; - - va_start(args, fmt); - /* FIXME - hopefully i < sizeof(buf) */ - l = vsprintf(buf, fmt, args); - va_end(args); - buf_end = buf + l; - - for (p = buf; p < buf_end; p++) - prom_putchar(*p); -} - - -void __init prom_init(void) -{ - mips_machgroup = MACH_GROUP_INFINEON; - mips_machtype = MACH_INFINEON_AMAZON; - - strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit"); - - add_memory_region(0x00000000, 0x1000000, BOOT_MEM_RAM); -} - -void prom_free_prom_memory(void) -{ -} - -const char *get_system_type(void) -{ - return BOARD_SYSTEM_TYPE; -} diff --git a/target/linux/amazon-2.6/files/arch/mips/amazon/setup.c b/target/linux/amazon-2.6/files/arch/mips/amazon/setup.c deleted file mode 100644 index a96b565c69..0000000000 --- a/target/linux/amazon-2.6/files/arch/mips/amazon/setup.c +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Copyright (C) 2004 Peng Liu - * Copyright (C) 2007 John Crispin - * Copyright (C) 2007 Felix Fietkau - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - * - */ - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern void prom_printf(const char * fmt, ...); -static void amazon_reboot_setup(void); - -/* the CPU clock rate - lifted from u-boot */ -unsigned int amazon_get_cpu_hz(void) -{ - /*-----------------------------------*/ - /**CGU CPU Clock Reduction Register***/ - /*-----------------------------------*/ - switch(amazon_readl(AMAZON_CGU_CPUCRD) & 0x3){ - case 0: - /*divider ration 1/1, 235 MHz clock */ - return 235000000; - case 1: - /*divider ration 2/3, 235 MHz clock, clock not accurate, here */ - return 150000000; - case 2: - /*divider ration 1/2, 235 MHz clock */ - return 117500000; - default: - /*divider ration 1/4, 235 MHz clock */ - return 58750000; - } -} - -/* the FPI clock rate - lifted from u-boot */ -unsigned int amazon_get_fpi_hz(void) -{ - unsigned int clkCPU; - clkCPU = amazon_get_cpu_hz(); - - /*-------------------------------------*/ - /***CGU Clock Divider Select Register***/ - /*-------------------------------------*/ - switch (amazon_readl(AMAZON_CGU_DIV) & 0x3) - { - case 1: - return clkCPU >> 1; - case 2: - return clkCPU >> 2; - default: - return clkCPU; - /* '11' is reserved */ - } -} - -/* this doesn't really belong here, but it's a convenient location */ -unsigned int amazon_get_cpu_ver(void) -{ - static unsigned int cpu_ver = 0; - if (cpu_ver == 0) - cpu_ver = amazon_readl(AMAZON_MCD_CHIPID) & 0xFFFFF000; - return cpu_ver; -} - -void amazon_time_init(void) -{ - mips_hpt_frequency = amazon_get_cpu_hz()/2; - printk("mips_hpt_frequency:%d\n", mips_hpt_frequency); -} - -extern int hr_time_resolution; - -/* ISR GPTU Timer 6 for high resolution timer */ -static void amazon_timer6_interrupt(int irq, void *dev_id) -{ - timer_interrupt(AMAZON_TIMER6_INT, NULL); -} - -static struct irqaction hrt_irqaction = { - .handler = amazon_timer6_interrupt, - .flags = SA_INTERRUPT, - .name = "hrt", -}; - -/* - * THe CPU counter for System timer, set to HZ - * GPTU Timer 6 for high resolution timer, set to hr_time_resolution - * Also misuse this routine to print out the CPU type and clock. - */ -void __init plat_timer_setup(struct irqaction *irq) -{ - /* cpu counter for timer interrupts */ - setup_irq(MIPS_CPU_TIMER_IRQ, irq); - - /* enable the timer in the PMU */ - amazon_writel(amazon_readl(AMAZON_PMU_PWDCR)| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI, AMAZON_PMU_PWDCR); - - /* setup the GPTU for timer tick f_fpi == f_gptu*/ - amazon_writel(0x0100, AMAZON_GPTU_CLC); - amazon_writel(0xffff, AMAZON_GPTU_CAPREL); - amazon_writel(0x80C0, AMAZON_GPTU_T6CON); -} - -void __init plat_mem_setup(void) -{ - u32 chipid = 0; - u32 part_no = 0; - - chipid = amazon_readl(AMAZON_MCD_CHIPID); - part_no = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid); - - if(part_no == AMAZON_CHIPID_YANGTSE){ - prom_printf("Yangtse Version\n"); - } else if (part_no == AMAZON_CHIPID_STANDARD) { - prom_printf(SYSTEM_MODEL_NAME "\n"); - } else { - prom_printf("unknown version %8x\n",part_no); - } - - amazon_reboot_setup(); - board_time_init = amazon_time_init; - - //stop reset TPE and DFE - amazon_writel(0, AMAZON_RST_REQ); - //clock - amazon_writel(0x3fff, AMAZON_PMU_PWDCR); - //reenable trace capability - part_no = readl(AMAZON_BCU_ECON); -} - -static void amazon_machine_restart(char *command) -{ - local_irq_disable(); - amazon_writel(AMAZON_RST_ALL, AMAZON_RST_REQ); - for (;;) ; -} - -static void amazon_machine_halt(void) -{ - printk(KERN_NOTICE "System halted.\n"); - local_irq_disable(); - for (;;) ; -} - -static void amazon_machine_power_off(void) -{ - printk(KERN_NOTICE "Please turn off the power now.\n"); - local_irq_disable(); - for (;;) ; -} - -static void amazon_reboot_setup(void) -{ - _machine_restart = amazon_machine_restart; - _machine_halt = amazon_machine_halt; - pm_power_off = amazon_machine_power_off; -} diff --git a/target/linux/amazon-2.6/files/drivers/atm/amazon_tpe.c b/target/linux/amazon-2.6/files/drivers/atm/amazon_tpe.c deleted file mode 100644 index cf3e407329..0000000000 --- a/target/linux/amazon-2.6/files/drivers/atm/amazon_tpe.c +++ /dev/null @@ -1,3074 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -//----------------------------------------------------------------------- -/* - * Description: - * Driver for Infineon Amazon TPE - */ -//----------------------------------------------------------------------- -/* Author: peng.liu@infineon.com - * Created: 12-April-2004 - */ -//----------------------------------------------------------------------- -/* History - * Last changed on: 13 Oct. 2004 - * Last changed by: peng.liu@infineon.com - * Last changed on: 28 Jan. 2004 - * Last changed by: peng.liu@infineon.com - * Last changed Reason: - * - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes) - */ -// 507261:tc.chen 2005/07/26 re-organize code address map to improve performance. -// 507281:tc.chen 2005/07/28 fix f4 segment isssue -/* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */ - -#ifndef __KERNEL__ -#define __KERNEL__ -#endif -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB -#endif - -/*TPE level loopback, bypass AWARE DFE */ -#undef TPE_LOOPBACK - -/* enable debug options */ -#undef AMAZON_ATM_DEBUG - -/* enable rx error packet analysis */ -#undef AMAZON_ATM_DEBUG_RX - -/* test AAL5 Interrupt */ -#undef AMAZON_TPE_TEST_AAL5_INT - -/* dump packet */ -#undef AMAZON_TPE_DUMP - -/* read ARC register*/ -/* this register is located in side DFE module*/ -#undef AMAZON_TPE_READ_ARC - -/* software controlled reassembly */ -#undef AMAZON_TPE_SCR - -/* recovery from AAL5 bug */ -#undef AMAZON_TPE_AAL5_RECOVERY - -#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) -#define ALPHAEUS_BASE_ADDR 0x31c00 -#define A_CFG_ADDR (ALPHAEUS_BASE_ADDR+0x04) -#define AR_CB0_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x2c) -#define AR_CB1_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x30) -#define AT_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x90) -#define AR_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x1a0) -#define AR_CD_CNT0_ADDR (ALPHAEUS_BASE_ADDR+0x1c8) -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) -#include -#include -#endif - -#define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args) - -/***************************************** External Functions *******************************************/ -extern unsigned int amazon_get_fpi_hz(void); -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); -extern void amz_push_oam(unsigned char *); - -//amazon_mei.c -#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) -extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize); -extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize); -#endif - -/***************************************** Internal Functions *******************************************/ -int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data); -/***************************************** Global Data *******************************************/ -amazon_atm_dev_t g_atm_dev; //device data -static struct tq_struct swex_start_task; //BH task -static struct tq_struct swex_complete_task; //BH task -#ifdef AMAZON_TPE_SCR -static struct tq_struct a5r_task; //BH task -#endif -static struct dma_device_info g_dma_dev; //for DMA -static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM]; -static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM]; -static u8 g_oam_cell[AMAZON_AAL0_SDU+4]; //for OAM cells -#ifdef AMAZON_CHECK_LINK -static int adsl_link_status; //ADSL link status, 0:down, 1:up -#endif //AMAZON_CHECK_LINK -/***************************************** Module Parameters *************************************/ -// Parameter Definition for module -static int port_enable0 = 1; // Variable for parameter port_enable0 -static int port_enable1 = 0; // Variable for parameter port_enable1 -static int port_max_conn0 = 15; // Variable for parameter port_max_conn0 -static int port_max_conn1 = 0; // Variable for parameter port_max_conn1 -static int port_cell_rate_up0 = 7500; // Variable for parameter port_cell_rate_up0 -static int port_cell_rate_up1 = 7500; // Variable for parameter port_cell_rate_up1 - - -static int qsb_tau = 1; // Variable for parameter qsb_tau -static int qsb_srvm = 0xf; // Variable for parameter qsb_srvm -static int qsb_tstep = 4 ; // Variable for parameter qsb_tstep - -static int cbm_nrt = 3900; // Variable for parameter cbm_nrt -static int cbm_clp0 =3500; // Variable for parameter cbm_clp0 -static int cbm_clp1 =3200; // Variable for parameter cbm_clp1 -static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS; // Variable for parameter cbm_free_cell_no - -static int a5_fill_pattern = 0x7e; // Variable for parameter a5_fill_pattern '~' -static int a5s_mtu = 0x700; // mtu for tx -static int a5r_mtu = 0x700; // mtu for rx - -static int oam_q_threshold = 64; // oam queue threshold, minium value 64 -static int rx_q_threshold = 1000; // rx queue threshold, minium value 64 -static int tx_q_threshold = 800; // tx queue threshold, minium value 64 - -MODULE_PARM(port_max_conn0, "i"); -MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0"); -MODULE_PARM(port_max_conn1, "i"); -MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1"); -MODULE_PARM(port_enable0, "i"); -MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled"); -MODULE_PARM(port_enable1, "i"); -MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled"); -MODULE_PARM(port_cell_rate_up0, "i"); -MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s"); -MODULE_PARM(port_cell_rate_up1, "i"); -MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s"); - -MODULE_PARM(qsb_tau,"i"); -MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0"); -MODULE_PARM(qsb_srvm, "i"); -MODULE_PARM_DESC(qsb_srvm, "Maximum burst size"); -MODULE_PARM(qsb_tstep, "i"); -MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4"); - -MODULE_PARM(cbm_nrt, "i"); -MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer"); -MODULE_PARM(cbm_clp0, "i"); -MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0"); -MODULE_PARM(cbm_clp1, "i"); -MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1"); -MODULE_PARM(cbm_free_cell_no, "i"); -MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager"); - -MODULE_PARM(a5_fill_pattern, "i"); -MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames"); -MODULE_PARM(a5s_mtu, "i"); -MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream"); -MODULE_PARM(a5r_mtu, "i"); -MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream"); - -MODULE_PARM(oam_q_threshold, "i"); -MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold"); - -MODULE_PARM(rx_q_threshold, "i"); -MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold"); - -MODULE_PARM(tx_q_threshold, "i"); -MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold"); - -/***************************************** local functions *************************************/ -/* Brief: valid QID - * Return: 1 if valid - * 0 if not - */ -static inline int valid_qid(int qid) -{ - return ( (qid>0) && (qiddata)) & 15) != 0){ - AMAZON_TPE_DMSG("need to adjust the alignment manually\n"); - skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) ); - } - -} - -/* - * Brief: initialize the device according to the module paramters - * Return: not NULL - ok - * NULL - fails - * Description: arrange load parameters and call the hardware initialization routines - */ -static void atm_init_parameters(amazon_atm_dev_t *dev) -{ - //port setting - dev->ports[0].enable = port_enable0; - dev->ports[0].max_conn = port_max_conn0; - dev->ports[0].tx_max_cr = port_cell_rate_up0; - if (port_enable1){ - dev->ports[1].enable = port_enable1; - dev->ports[1].max_conn = port_max_conn1; - dev->ports[1].tx_max_cr = port_cell_rate_up1; - } - - //aal5 - dev->aal5.padding_byte = a5_fill_pattern; - dev->aal5.tx_max_sdu = a5s_mtu; - dev->aal5.rx_max_sdu = a5r_mtu; - - //cbm - dev->cbm.nrt_thr = cbm_nrt; - dev->cbm.clp0_thr = cbm_clp0; - dev->cbm.clp1_thr = cbm_clp1; - dev->cbm.free_cell_cnt = cbm_free_cell_no; - - //qsb - dev->qsb.tau = qsb_tau; - dev->qsb.tstepc =qsb_tstep; - dev->qsb.sbl = qsb_srvm; - - //allocate on the fly - dev->cbm.mem_addr = NULL; - dev->cbm.qd_addr = NULL; -} - - -/* Brief: Find QID for VCC - * Parameters: vcc - VCC data structure - * Return Value: -EINVAL - VCC not found - * qid - QID for this VCC - * Description: - * This function returns the QID of a given VCC - */ -static int amazon_atm_get_queue(struct atm_vcc* vcc) -{ - int i; - for (i=0;ivpi == vpi) && (vcc->vci == vci)) return i; - } - } - return -EINVAL; -} - -/* Brief: Find QID for VPI - * Parameters: vpi - VPI to found - * Return Value: -EINVAL - VPI not found - * qid - QID for this VPI - * - * Description: - * This function returns the QID for a given VPI. itf and VCI don't matter - */ -static int amazon_atm_find_vpi(u8 vpi) -{ - int i; - for (i=0;ivpi == vpi) return i; - } - } - return -EINVAL; -} - -/* - * Brief: Clears QID entries for VCC - * - * Parameters: vcc - VCC to found - * - * Description: - * This function searches for the given VCC and sets it to NULL if found. - */ -static inline void amazon_atm_clear_vcc(int i) -{ - g_atm_dev.queues[i].vcc = NULL; - g_atm_dev.queues[i].free = 1; -} - - -/* - * Brief: dump skb data - */ -static inline void dump_skb(u32 len, char * data) -{ -#ifdef AMAZON_TPE_DUMP - int i; - for(i=0;ipop != NULL) { - vcc->pop(vcc, skb); - } else { - dev_kfree_skb_any(skb); - } -} -/* - * Brief: release TX skbuff - */ -static inline void amazon_atm_free_tx_skb(struct sk_buff *skb) -{ - struct atm_vcc* vcc = ATM_SKB(skb)->vcc; - if (vcc!=NULL){ - amazon_atm_free_tx_skb_vcc(vcc,skb); - } else { - dev_kfree_skb_any(skb);//fchang:Added - } -} - -/* Brief: divide by 64 and round up - */ -static inline u32 divide_by_64_round_up(int input) -{ - u32 tmp1; - tmp1 = (u32) input; - tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64); - if (tmp1 == 0) tmp1 = 1; - return tmp1; -} - -/* - * Brief: statistics - */ -#ifdef AMAZON_ATM_DEBUG -static inline void queue_statics(int qid, qs_t idx) -{ - if (valid_qid(qid)){ - g_atm_dev.queues[qid].qs[idx]++; - } -} -#else //not AMAZON_ATM_DEBUG -static inline void queue_statics(int qid, qs_t idx){} -#endif //AMAZON_ATM_DEBUG - - -/* Brief: set dma tx full, i.e. there is no available descriptors - */ -static void inline atm_dma_full(void) -{ - AMAZON_TPE_DMSG("ch0 is full\n"); - atomic_set(&g_atm_dev.dma_tx_free_0,0); -} - -/* - * Brief set dma tx free (at least one descript is available) - */ -inline static void atm_dma_free(void) -{ - AMAZON_TPE_DMSG("ch0 is free\n"); - atomic_set(&g_atm_dev.dma_tx_free_0,1); -} - - -/* Brief: return the status of DMA TX descriptors - * Parameters: TX channel (DMA_TX_CH0, TX_CH1) - * Return: - * 1: there are availabel TX descriptors - * 0: no available - * Description: - * - */ -inline int dma_may_send(int ch) -{ - if (atomic_read(&g_atm_dev.dma_tx_free_0)){ - return 1; - } - return 0; -} - -/******************************* global functions *********************************/ -/* - * Brief: SWIE Cell Extraction Start Routine - * and task routine for swex_complete_task - * Parameters: irq_stat - interrupt status - * - * Description: - * This is the routine for extracting cell. It will schedule itself if the hardware is busy. - * This routine runs in interrupt context - */ -void amazon_atm_swex(void * irq_stat) -{ - u32 ex_stat=0; - u32 addr; - // Read extraction status register - ex_stat = readl(CBM_HWEXSTAT0_ADDR); - - // Check if extraction/insertion is in progress - if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) { - AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); - swex_start_task.data = irq_stat; - queue_task(&swex_start_task, &tq_immediate); - mark_bh(IMMEDIATE_BH); - }else { - // Extract QID - g_atm_dev.swie.qid = (((u32)irq_stat) >> 24); - AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid); - //read status word - addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); - addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0); - addr = KSEG1ADDR(addr); - g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK; - AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw); - - // Start extraction - AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR); - AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR); - } -} -#ifdef AMAZON_TPE_SCR -u32 g_a5r_wait=0; -/* - * Brief: AAL5 Packet Extraction Routine and task routine for a5r_task - * Parameters: irq_stat - interrupt status - * - * Description: - * This is the routine for extracting frame. It will schedule itself if the hardware is busy. - * This routine runs in interrupt context - */ -void amazon_atm_a5r(void* qid) -{ - volatile u32 ex_stat=0; - u32 addr; - u32 a5r_wait=0; - - ex_stat = readl(CBM_HWEXSTAT0_ADDR); -#if 0 - // Check if extraction/insertion is in progress - if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { - AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); - a5r_task.data = qid; - queue_task(&a5r_task, &tq_immediate); - mark_bh(IMMEDIATE_BH); - }else { - AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid); - // Start extraction - AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); - AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); - } -#else - //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { - while ( ex_stat != 0x80){ - a5r_wait++; - ex_stat = readl(CBM_HWEXSTAT0_ADDR); -#if 0 - if (a5r_wait >= 0xffffff){ - a5r_wait=0; - printk("."); - } -#endif - } - if (a5r_wait > g_a5r_wait){ - g_a5r_wait = a5r_wait; - } - AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); - AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); -#endif -} - -#endif //AMAZON_TPE_SCR - -/* Brief: Handle F4/F5 OAM cell - * Return: - * 0 ok - * <0 fails - */ -static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status) -{ - struct atm_vcc* vcc=NULL; - int qid; - if (!status&SWIE_EOAM_MASK){ - AMAZON_TPE_EMSG("unknown cell received, discarded\n"); - goto amazon_handle_oam_cell_err_exit; - }else if (status&SWIE_ECRC10ERROR_MASK){ - AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status); - goto amazon_handle_oam_cell_err_exit; - }else{ - if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){ - //F4 level (VPI) OAM, Assume duplex - qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET; - }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){ - //F5 level (VCI) OAM, Assume duplex - qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET; - }else{ - qid = -1; - AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n"); - goto amazon_handle_oam_cell_err_exit; - } - } - if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){ - //TODO, should we do this for ALL OAM types? (Actually only User and CC) - g_atm_dev.queues[qid].access_time=xtime; - if (vcc->push_oam){ - (*vcc->push_oam)(vcc,data); - }else{ - amz_push_oam(data); - } - }else{ - AMAZON_TPE_EMSG("no VCC yet\n"); - goto amazon_handle_oam_cell_err_exit; - } - return 0; -amazon_handle_oam_cell_err_exit: - dump_skb(AMAZON_AAL0_SDU,(char *)data); - return -1; -} - -/* Brief: SWIE Cell Extraction Finish Routine - * and task routine for swex_complete_task - * Description: - * 1.Allocate a buffer of type struct sk_buff - * 2.Copy the data from the temporary memory to this buffer - * 3.Push the data to upper layer - * 4.Update the statistical data if necessary - * 5.Release the temporary data - - */ -void amazon_atm_swex_push(void * data) -{ - struct atm_vcc* vcc=NULL; - struct sk_buff* skb=NULL; - struct amazon_atm_cell_header * cell_header; - u32 status; - int qid; - if (!data){ - AMAZON_TPE_EMSG("data is NULL\n"); - return; - } - qid = ((u8*)data)[AMAZON_AAL0_SDU]; - status = ((u32*)data)[ATM_AAL0_SDU/4]; - cell_header = (struct amazon_atm_cell_header *) data; - if (valid_qid(qid) != 1){ - AMAZON_TPE_EMSG("error qid: %u\n",qid); - AMAZON_TPE_EMSG("unknown cells recieved\n"); - }else if (qid == AMAZON_ATM_OAM_Q_ID){ - //OAM or RM or OTHER cell - //Find real connection - -#ifdef IKOS_MINI_BOOT - //for OAM loop back test - dump_skb(56,(char *)data); - //kfree(data); using g_oam_cell - return; -#endif //IKOS_MINI_BOOT -#ifdef TPE_LOOPBACK - amz_push_oam(data); - return; -#endif//TPE_LOOPBACK - int ret = 0; - ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status); - if (ret == 0) - return; - }else{ - //should be normal AAL0 cells - // Get VCC - vcc = g_atm_dev.queues[qid].vcc; - if (vcc != NULL) { - AMAZON_TPE_DMSG("push to upper layer\n"); - skb = dev_alloc_skb(AMAZON_AAL0_SDU); - if (skb != NULL) { - //skb->dev=vcc->dev; - memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU); - skb->stamp = xtime; - ATM_SKB(skb)->vcc = vcc; - (*g_atm_dev.queues[qid].push)(vcc,skb,0); - }else{ - AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n"); - //inform the upper layer - (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM); - atomic_inc(&vcc->stats->rx_drop); - } - }else{ - AMAZON_TPE_EMSG("invalid qid %u\n",qid); - } - } - //kfree(data); using g_oam_cell -} - -/* - * Brief: Interrupt handler for software cell extraction (done) - * Parameters: irq - CPPN for this interrupt - * data - Device ID for this interrupt - * regs - Register file - * - * Description: - * When a software extraction is finished this interrupt is issued. - * It reads the cell data and sends it to the ATM stack. - */ -void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs) -{ - u32 * cell = NULL; - int i; - //ATM_AAL0 SDU + QID - AMAZON_TPE_DMSG("SWIE extraction done\n"); - cell = (u32 *) g_oam_cell; - if (cell != NULL){ - //convert to host byte order from big endian - for(i=0;i>CBM_INTINF0_QID_SHIFT); -#ifdef AMAZON_TPE_SCR - if (irq_stat & CBM_INTINF0_EF){ - amazon_atm_a5r((void*)qid); - } -#endif - // Check if Any Cell Arrived - if (irq_stat & CBM_INTINF0_ACA) { - amazon_atm_swex((void *)irq_stat); - } - //TX AAL5 PDU discard - if (irq_stat & CBM_INTINF0_OPF){ - if ( (qid) < CBM_RX_OFFSET ){ - g_atm_dev.mib_counter.tx_drop++; - } - queue_statics(qid, QS_HW_DROP); - } - if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){ - AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat); - if (irq_stat & CBM_INTINF0_ERR){ - AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n"); - } - if (irq_stat & CBM_INTINF0_Q0E){ - AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); - } - if (irq_stat & CBM_INTINF0_Q0I){ - AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); - } - if (irq_stat & CBM_INTINF0_RDE){ - AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid); - dump_qd(qid); - } - } - } - mask_and_ack_amazon_irq(AMAZON_CBM_INT); -} - -/* Brief: check the status word after AAL SDU after reassembly - */ -static inline void check_aal5_error(u8 stw0, u8 stw1, int qid) -{ - if (stw0 & AAL5_STW0_MFL){ - AMAZON_TPE_DMSG("Maximum Frame Length\n"); - g_atm_dev.queues[qid].aal5VccOverSizedSDUs++; - } - if (stw0 & AAL5_STW0_CRC){ - AMAZON_TPE_DMSG("CRC\n"); - g_atm_dev.queues[qid].aal5VccCrcErrors++; - } -#ifdef AMAZON_ATM_DEBUG_RX - AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1); -#endif -} - -/* Brief: Process DMA rx data - * Parameters: - dma_dev: pointer to the dma_device_info, provided by us when register the dma device - * Return: no - * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction. - * - */ -//507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev) -void __system atm_process_dma_rx(struct dma_device_info* dma_dev) -{ - u8 * head=NULL; - u32 length=0; - u8 stw0=0; - u8 stw1=0; - - struct sk_buff * skb=NULL; - struct atm_vcc * vcc=NULL; - int qid=0; -#ifdef AMAZON_ATM_DEBUG_RX - static int dma_rx_dump=0; - static u32 seq=0; - - seq++; - if (dma_rx_dump>0){ - printk("\n=========================[%u]=========================\n",seq); - } -#endif - length=dma_device_read(dma_dev,&head,(void**)&skb); - AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length); - if (head == NULL||length<=0) { - AMAZON_TPE_DMSG("dma_read null \n"); - goto error_exit; - } - - if (length > (g_atm_dev.aal5.rx_max_sdu+64)){ - AMAZON_TPE_EMSG("received packet too large (%u)\n",length); - goto error_exit; - } - //check AAL5R trail for error and qid - //last byte is qid - length--; - qid = (int) head[length]; - AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid); - //STW0 is always 4 bytes before qid - length -= 4; - stw0 = head[length]&0xff; - AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0); - //position of STW1 depends on the BE bits - length = length-4 + (stw0&AAL5_STW0_BE); - stw1 = head[length]&0xff; - AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1); - if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){ - //AAL5 Error - check_aal5_error(stw0, stw1,qid); - goto error_exit; - } - //make data pointers consistent - //UU + CPI - length -= 2; - AMAZON_TPE_DMSG("packet length %u\n", length); - - //error: cannot restore the qid - if (valid_qid(qid) != 1){ - AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid); - goto error_exit; - } - vcc = g_atm_dev.queues[qid].vcc; - if (vcc == NULL){ - AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid); - goto error_exit; - } - if (skb == NULL){ - AMAZON_TPE_EMSG("cannot restore skb pointer!\n"); - goto error_exit; - } - skb_put(skb,length); - skb->stamp = xtime; - g_atm_dev.queues[qid].access_time=xtime; - if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){ - g_atm_dev.mib_counter.rx_drop++; - queue_statics(qid, QS_SW_DROP); - }else{ - g_atm_dev.mib_counter.rx++; - adsl_led_flash();//joelin adsl led - queue_statics(qid, QS_PKT); - AMAZON_TPE_DMSG("push successful!\n"); - } -#ifdef AMAZON_ATM_DEBUG_RX - if (dma_rx_dump>0){ - printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length); - dump_skb(length+7, head); - } - if (dma_rx_dump >0) dma_rx_dump--; -#endif - return ; -error_exit: -#ifdef AMAZON_ATM_DEBUG_RX - if ( (head!=NULL) && (length >0)){ - AMAZON_TPE_EMSG("length=%u\n",length); - dump_skb(length+5, head); - } - dma_rx_dump++; -#endif - g_atm_dev.mib_counter.rx_err++; - queue_statics(qid, QS_ERR); - /* - if (vcc){ - (*g_atm_dev.queues[qid].push)(vcc,skb,1); - } - */ - if (skb != NULL) { - dev_kfree_skb_any(skb); - } - return; -} - -/*Brief: ISR for DMA pseudo interrupt - *Parameter: - dma_dev: pointer to the dma_device_info, provided by us when register the dma device - intr_status: - RCV_INT: rx data available - TX_BUF_FULL_INT: tx descriptor run out of - TRANSMIT_CPT_INT: tx descriptor available again - *Return: - 0 for success??? - */ -//507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) -int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) -{ - AMAZON_TPE_DMSG("status:%u\n",intr_status); - switch (intr_status) { - case RCV_INT: - atm_process_dma_rx(dma_dev); - break; - case TX_BUF_FULL_INT: - //TX full: no descriptors - atm_dma_full(); - break; - case TRANSMIT_CPT_INT: - //TX free: at least one descriptor - atm_dma_free(); - break; - default: - AMAZON_TPE_EMSG("unknown status!\n"); - } - return 0; -} - -/*Brief: free buffer for DMA tx - *Parameter: - dataptr: pointers to data buffer - opt: optional parameter, used to convey struct skb pointer, passwd in dma_device_write - *Return: - 0 for success??? - *Description: - called by DMA module to release data buffer after DMA tx transaction - *Error: - cannot restore skb pointer - */ -int amazon_atm_free_tx(u8*dataptr, void* opt) -{ - struct sk_buff *skb; - if (opt){ - AMAZON_TPE_DMSG("free skb%8p\n",opt); - skb = (struct sk_buff *)opt; - amazon_atm_free_tx_skb(skb); - }else{ - AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n"); - } - return 0; -} - -/*Brief: allocate buffer & do alignment - */ -inline struct sk_buff * amazon_atm_alloc_buffer(int len) -{ - struct sk_buff *skb; - skb = dev_alloc_skb(len+16); - if (skb){ - //alignment requriements (4x32 bits (16 bytes) boundary) - alloc_align_16(skb); - } - return skb; -} - -/*Brief: allocate buffer for DMA rx - *Parameter: - len: length - opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler, - *Return: - pointer to buffer, NULL means error? - *Description: - must make sure byte alignment - */ - -u8* amazon_atm_alloc_rx(int len, int* offset, void **opt) -{ - struct sk_buff *skb; - *offset = 0; - skb = amazon_atm_alloc_buffer(len); - if (skb){ - AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len); - *(struct sk_buff**)opt = skb; - }else{ - AMAZON_TPE_DMSG("no memory for receiving atm frame!\n"); - return NULL; - } - return skb->data; -} - - - - -/* Brief: Allocate kernel memory for sending a datagram. - * Parameters - * vcc virtual connection - * size data buffer size - * Return: - * NULL fail - * sk_buff a pointer to a sk_buff - * Description: - * This function can allocate our own additional memory for AAL5S inbound - * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c) - * when we open the device. - * byte alignment is done is DMA driver. - */ -struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size) -{ - struct sk_buff *skb; - - if (!dma_may_send(DMA_TX_CH0)){ - AMAZON_TPE_EMSG("no DMA descriptor available!\n"); - return NULL; - } - //AAL5 inbound header space + alignment extra buffer - size+=8+AAL5S_INBOUND_HEADER; - - if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) { - AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n", - atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf); - return NULL; - } - - skb = amazon_atm_alloc_buffer(size); - if (skb == NULL){ - AMAZON_TPE_EMSG("no memory\n"); - return NULL; - } - AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb); - AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize); - atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse); - - //reserve for AAL5 inbound header - skb_reserve(skb,AAL5S_INBOUND_HEADER); - return skb; -} - - -/* Brief: change per queue QSB setting according to vcc qos parameters - * Paramters: - * vcc: atm_vcc pointer - * qid: CBM queue id (1~15) - * Return: - */ -static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid) -{ - qsb_qptl_t qptl; - qsb_qvpt_t qvpt; - u32 tmp=0; - unsigned int qsb_clk; - - qsb_clk = amazon_get_fpi_hz()>>1; - - AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n" - ,qos->txtp.traffic_class - ,qos->txtp.max_pcr - ,qos->txtp.pcr - ,qos->txtp.min_pcr - ,qos->txtp.scr - ,qos->txtp.mbs - ,qos->txtp.cdv - ); - - // PCR limiter - if (qos->txtp.max_pcr == 0){ - qptl.bit.tprs = 0; /* 0 disables the PCR limiter */ - }else { - // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr - tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1; - // check if an overfow occured - if (tmp > QSB_TP_TS_MAX) { - AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp); - qptl.bit.tprs = QSB_TP_TS_MAX; - }else{ - qptl.bit.tprs = tmp; - } - } - //WFQ - if (qos->txtp.traffic_class == ATM_CBR || qos->txtp.traffic_class ==ATM_VBR_RT){ - // real time queue gets weighted fair queueing bypass - qptl.bit.twfq = 0; - }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){ - // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates - // wfq factor is maximum cell rate / garenteed cell rate. - //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; - if (qos->txtp.min_pcr == 0) { - AMAZON_TPE_EMSG(" MIN_PCR should not be zero\n"); - qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; - }else{ - tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; - if (tmp == 0 ){ - qptl.bit.twfq = 1; - }else if (tmp > QSB_WFQ_NONUBR_MAX){ - AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp); - qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; - }else{ - qptl.bit.twfq = tmp; - } - } - }else if (qos->txtp.traffic_class == ATM_UBR){ - // ubr bypass, twfq set to maximum value - qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; - }else{ - //tx is diabled, treated as UBR - AMAZON_TPE_EMSG(" unsupported traffic class %u \n", qos->txtp.traffic_class); - qos->txtp.traffic_class = ATM_UBR; - qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; - } - - //SCR Leaky Bucket Shaper VBR.0/VBR.1 - if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){ - if (qos->txtp.scr == 0){ - //SCR == 0 disable the shaper - qvpt.bit.ts = 0; - qvpt.bit.taus = 0; - }else{ - //CLP - if (vcc->atm_options&ATM_ATMOPT_CLP){ - //CLP1 - qptl.bit.vbr = 1; - }else{ - //CLP0 - qptl.bit.vbr = 0; - } - //TS and TauS - tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1; - if (tmp > QSB_TP_TS_MAX) { - AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp); - qvpt.bit.ts = QSB_TP_TS_MAX; - }else{ - qvpt.bit.ts = tmp; - } - tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64; - if (tmp > QSB_TAUS_MAX){ - AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp); - qvpt.bit.taus = QSB_TAUS_MAX; - }else if (tmp == 0){ - qvpt.bit.taus = 1; - }else{ - qvpt.bit.taus = tmp; - } - } - }else{ - qvpt.w0 = 0; - } - //write the QSB Queue Parameter Table (QPT) - AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<itf; - u32 dma_qos=0; - u8 * qd_addr=NULL; - - tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt; - //RT: check if the connection is a real time connection - if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){ - tx_config|= CBM_QD_W3_RT; - }else{ - tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service - } - rx_config = tx_config; - - if(vcc->qos.aal == ATM_AAL5){ - //QoS: DMA QoS according to the traffic class - switch (vcc->qos.txtp.traffic_class){ - case ATM_CBR: dma_qos = CBR_DMA_QOS;break; - case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break; - case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break; - case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break; - case ATM_UBR: dma_qos = UBR_DMA_QOS;break; - } - - //TX: upstream, AAL5(EPD or PPD), NOINT, SBid - tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); - //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR -#ifdef AMAZON_TPE_SCR - rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF; -#else - rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR; -#endif - }else { - //should be AAL0 - //upstream, NOINT, SBid - tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); - //RX: downstream, ACA interrupt, - rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA; - } - - //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells - tx_config |= ( (divide_by_64_round_up(tx_q_threshold)&0xffff)< 1024) - { - AMAZON_TPE_EMSG("timeout\n"); - return -EIO; - } - // write address register, - AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR); - // configure transmit queue - tmp1 = vpi<<24|vci<<8; - tmp1|= HTU_RAMDAT1_VCON // valid connection the entry is not validated here !!!!!!!!!!!!!!!! - |HTU_RAMDAT1_VCI3 // vci3 -> oam queue - |HTU_RAMDAT1_VCI4 // vci4 -> oam queue - |HTU_RAMDAT1_VCI6 // vci6 -> rm queue - |HTU_RAMDAT1_PTI4 // pti4 -> oam queue - |HTU_RAMDAT1_PTI5; // pti5 -> oam queue - - // ramdat 1 (in params & oam handling) - AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR); - // ramdat 2 (out params & oam handling) - tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK) - |HTU_RAMDAT2_PTI6 - |HTU_RAMDAT2_PTI7 - |HTU_RAMDAT2_F4U - |HTU_RAMDAT2_F5U - ; - AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR); - wmb(); - // write HTU entry - AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR); - return 0; -} -/* - * Brief: add HTU table entry - * Parameter: - * vcc: atm_vcc pointer - * qid: CBM queue id - * Return: - * 0: sucessful - * EIO: HTU table entry cannot be written - */ -inline static int set_htu(struct atm_vcc *vcc, u32 qid) -{ - return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET)); -} - -/* - * Brief: allocate a queue - * Return: - * <=0 no available queues - * >0 qid - */ -static int atm_allocate_q(short itf) -{ - int i; - u32 tmp1=0; - int qid=0; - amazon_atm_port_t * dev; - dev = &g_atm_dev.ports[itf]; - //find start queue id for this interface - for (i=0; i< itf; i++) - { - qid+= g_atm_dev.ports[i].max_conn; - } - // apply default queue offset ( oam, free cell queue, others, rm ) - qid += CBM_DEFAULT_Q_OFFSET; - tmp1 = qid; - // search for a free queue - while ( (qidmax_conn) - && ( g_atm_dev.queues[qid].free != 1)) { - qid++;; - } - // if none was found, send failure message and return - if ( tmp1+dev->max_conn == qid) - { - return -EFAULT; - } - return qid; - -} -/* Brief: open a aal5 or aal0 connection - */ -static int atm_open(struct atm_vcc *vcc, push_back_t push) -{ - int err=0; - int qid=0; - amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf]; - unsigned long flags; - /***************** check bandwidth ******************/ - /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */ - if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) - ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) - ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr) - ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr) - ) { - AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr); - return -EINVAL; - } - if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){ - AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid); - return -EADDRINUSE; - } - - /***************** allocate entry queueID for this port *****************/ - if ( (qid=atm_allocate_q(vcc->itf)) <= 0){ - AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid); - AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf); - return -EINVAL; - } - /**************QSB parameters and CBM descriptors*************/ - set_qsb(vcc, &vcc->qos, qid); - set_qd(vcc, qid); - mb(); - err=set_htu(vcc,qid); - if (err){ - AMAZON_TPE_EMSG("set htu entry fails %u\n",err); - return err; - } - /************set internal mapping*************/ - local_irq_save(flags); - g_atm_dev.queues[qid].free = 0; - g_atm_dev.queues[qid].vcc = vcc; - g_atm_dev.queues[qid].push = push; - g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0; - g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc; - g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push; - /******************reserve bandwidth**********************/ - if (vcc->qos.txtp.traffic_class == ATM_CBR){ - //CBR, real time connection, reserve PCR - port->tx_cur_cr += vcc->qos.txtp.max_pcr; - port->tx_rem_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ - //VBR_RT, real time connection, reserve PCR - port->tx_cur_cr += vcc->qos.txtp.max_pcr; - port->tx_rem_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ - //VBR_NRT, reserve SCR - port->tx_cur_cr += vcc->qos.txtp.pcr; - port->tx_rem_cr -= vcc->qos.txtp.pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ - //UBR_PLUS, reserve MCR - port->tx_cur_cr += vcc->qos.txtp.min_pcr; - port->tx_rem_cr -= vcc->qos.txtp.min_pcr; - } - local_irq_restore(flags); - return err; -} -/* Brief: Open ATM connection - * Parameters: atm_vcc - Pointer to VCC data structure - * vpi - VPI value for new connection - * vci - VCI value for new connection - * - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - No bandwidth/queue/ or unsupported AAL type - * Description: - * This function opens an ATM connection on a specific device/interface - * - */ -int amazon_atm_open(struct atm_vcc *vcc,push_back_t push) -{ - int err=0; - - AMAZON_TPE_DMSG("vpi %u vci %u itf %u aal %u\n" - ,vcc->vpi - ,vcc->vci - ,vcc->itf - ,vcc->qos.aal - ); - - AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n" - ,vcc->qos.txtp.traffic_class - ,vcc->qos.txtp.max_pcr - ,vcc->qos.txtp.max_sdu - ); - AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n" - ,vcc->qos.rxtp.traffic_class - ,vcc->qos.rxtp.max_pcr - ,vcc->qos.rxtp.max_sdu - ); - if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){ - err = atm_open(vcc,push); - }else{ - AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal); - err = -EPROTONOSUPPORT; - }; - if (err == 0 ){ - //replace the default memory allocation function with our own - vcc->alloc_tx = amazon_atm_alloc_tx; - set_bit(ATM_VF_READY,&vcc->flags); - } - return err; -} - -/* Brief: Send ATM OAM cell - * Parameters: atm_vcc - Pointer to VCC data structure - * skb - Pointer to sk_buff structure, that contains the data - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - Not supported - * Description: - * This function sends a cell over and ATM connection - * We always release the skb - * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE) - */ -int amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags) -{ - int err=0; - int qid=0; - struct amazon_atm_cell_header * cell_header; - // Get cell header - cell_header = (struct amazon_atm_cell_header*) cell; - if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) { - qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci); - }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) { - //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi); - // 507281:tc.chen start - u8 f4_vpi; - f4_vpi = cell_header->bit.vpi; - qid = amazon_atm_find_vpi(f4_vpi ); - // 507281:tc.chen end - }else{ - //non-OAM cells, always invalid - qid = -EINVAL; - } - if (qid == -EINVAL) { - err = -EINVAL; - AMAZON_TPE_EMSG("not valid AAL0 packet\n"); - }else{ - //send the cell using swie -#ifdef TPE_LOOPBACK - err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell); -#else - err = amazon_atm_swin(qid, cell); -#endif - } - //kfree(cell); - return err; -} - -/* Brief: Send AAL5 frame through DMA - * Parameters: vpi - virtual path id - * vci - virtual circuit id - * clp - cell loss priority - * qid - CBM queue to be sent to - * skb - packet to be sent - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - Not supported - * Description: - * This function sends a AAL5 frame over and ATM connection - * 1. make sure that the data is aligned to 4x32-bit boundary - * 2. provide the inbound data (CPCS-UU and CPI, not used here) - * 3. set CLPn - * 4. send the frame by DMA - * 5. release the buffer ??? - ** use our own allocation alloc_tx - ** we make sure the alignment and additional memory - *** we always release the skb - - */ -int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb) -{ - int err=0,need_pop=1; - u32 * data=NULL; - int nwrite=0; - struct sk_buff *skb_tmp; - u32 len=skb->len; - - //AAL5S inbound header 8 bytes - if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) { - AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu); - AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len); - err = -EMSGSIZE; - goto atm_dma_tx_error_exit; - } - - //Check the byte alignment requirement and header space - if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)len+16); - if (skb_tmp==NULL){ - err = - ENOMEM; - goto atm_dma_tx_error_exit; - } - alloc_align_16(skb_tmp); - g_atm_dev.aal5.cnt_cpy++; - skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER); - memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len); - amazon_atm_free_tx_skb(skb); - need_pop=0; - skb = skb_tmp; - } - //Provide AAL5S inbound header - data = (u32 *)skb_push(skb,8); - data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp); - data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid); - - len = skb->len; - - //send through DMA - AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]); - AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]); - AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len); - nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb); - if (nwrite != len) { - //DMA descriptors full -// AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); - AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); - err = -EAGAIN; - goto atm_dma_tx_drop_exit; - } - AMAZON_TPE_DMSG("just finish call dma_write\n"); - //release in the "dma done" call-back - return 0; -atm_dma_tx_error_exit: - g_atm_dev.mib_counter.tx_err++; - queue_statics(qid, QS_ERR); - goto atm_dma_tx_exit; - -atm_dma_tx_drop_exit: - g_atm_dev.mib_counter.tx_drop++; - queue_statics(qid, QS_SW_DROP); -atm_dma_tx_exit: - if (need_pop){ - amazon_atm_free_tx_skb(skb); - }else{ - dev_kfree_skb_any(skb); - } - return err; -} - -/* Brief: Send AAL0/AAL5 packet - * Parameters: atm_vcc - Pointer to VCC data structure - * skb - Pointer to sk_buff structure, that contains the data - * Return: 0 - sucessful - * -ENOMEM - No memory available - * -EINVAL - Not supported - * Description: - * See amazon_atm_dma_tx - */ -int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb) -{ - int qid=0; - u8 clp=0; - int err=0; - u32 wm=0; - - if (vcc == NULL || skb == NULL){ - AMAZON_TPE_EMSG("invalid parameter\n"); - return -EINVAL; - } - ATM_SKB(skb)->vcc = vcc; - qid = amazon_atm_get_queue(vcc); - if (valid_qid(qid) != 1) { - AMAZON_TPE_EMSG("invalid vcc!\n"); - err = -EINVAL; - goto atm_send_err_exit; - } - - //Send AAL0 using SWIN - if (vcc->qos.aal == ATM_AAL0){ -#ifdef TPE_LOOPBACK - err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data); -#else - err=amazon_atm_swin(qid, skb->data); -#endif - if (err){ - goto atm_send_err_exit; - } - goto atm_send_exit; - } - - //Should be AAl5 - //MIB counter - g_atm_dev.mib_counter.tx++; - adsl_led_flash();//joelin adsl led - queue_statics(qid, QS_PKT); - -#ifdef AMAZON_CHECK_LINK - //check adsl link - if (adsl_link_status == 0){ - //link down - AMAZON_TPE_DMSG("ADSL link down, discarded!\n"); - err=-EFAULT; - goto atm_send_drop_exit; - } -#endif - clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0; - //check watermark first - wm = readl(CBM_WMSTAT0_ADDR); - if ( (wm & (1<qos.txtp.traffic_class != ATM_CBR - &&vcc->qos.txtp.traffic_class != ATM_VBR_RT) - &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){ - //wm hit: discard - AMAZON_TPE_DMSG("watermark hit, discarded!\n"); - err=-EFAULT; - goto atm_send_drop_exit; - } -#ifdef TPE_LOOPBACK - return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb); -#else - return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb); -#endif - -atm_send_exit: - amazon_atm_free_tx_skb_vcc(vcc,skb); - return 0; - -atm_send_drop_exit: - g_atm_dev.mib_counter.tx_drop++; - queue_statics(qid,QS_SW_DROP); -atm_send_err_exit: - amazon_atm_free_tx_skb_vcc(vcc,skb); - return err; -} - -/* Brief: Return ATM port related MIB - * Parameter: interface number - atm_cell_ifEntry_t - */ -int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf) -{ - g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP); - to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp; -#ifdef AMAZON_TPE_READ_ARC - u32 reg_val=0; - meiDebugRead((AR_CELL0_ADDR+itf*4),®_val,1); - g_atm_dev.mib_counter.rx_cells += reg_val; - reg_val=0; - meiDebugWrite((AR_CELL0_ADDR+itf*4),®_val,1); - to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32; - to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; - - meiDebugRead((AT_CELL0_ADDR+itf*4),®_val,1); - g_atm_dev.mib_counter.tx_cells += reg_val; - reg_val=0; - meiDebugWrite((AT_CELL0_ADDR+itf*4),®_val,1); - to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32; - to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; - - meiDebugRead((AR_CD_CNT0_ADDR+itf*4),®_val,1); - g_atm_dev.mib_counter.rx_err_cells += reg_val; - reg_val=0; - meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),®_val,1); - to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells; - - to->ifOutErrors = 0; -#else - to->ifHCInOctets_h = 0; - to->ifHCInOctets_l = 0; - to->ifHCOutOctets_h = 0; - to->ifHCOutOctets_l = 0; - to->ifInErrors = 0; - to->ifOutErrors = 0; -#endif - return 0; -} - -/* Brief: Return ATM AAL5 related MIB - * Parameter: - atm_aal5_ifEntry_t - */ -int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to) -{ - u32 reg_l,reg_h; - //AAL5R received Octets from ATM - reg_l = readl(AAL5_RIOL_ADDR); - reg_h = readl(AAL5_RIOM_ADDR); - g_atm_dev.mib_counter.rx_cnt_h +=reg_h; - if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){ - g_atm_dev.mib_counter.rx_cnt_h++; - } - - g_atm_dev.mib_counter.rx_cnt_l+= reg_l; - //AAL5S sent Octets to ATM - reg_l = readl(AAL5_SOOL_ADDR); - reg_h = readl(AAL5_SOOM_ADDR); - g_atm_dev.mib_counter.tx_cnt_h +=reg_h; - if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){ - g_atm_dev.mib_counter.tx_cnt_h++; - } - g_atm_dev.mib_counter.tx_cnt_l+= reg_l; - - - g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR); - g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR); - - //store - to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h; - to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l; - to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h; - to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l; - to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop; - to->ifInDiscards = g_atm_dev.mib_counter.rx_drop; - - //Software provided counters - //packets passed to higher layer - to->ifInUcastPkts = g_atm_dev.mib_counter.rx; - //packets passed from higher layer - to->ifOutUcastPkts = g_atm_dev.mib_counter.tx; - //number of wrong downstream packets - to->ifInErrors = g_atm_dev.mib_counter.rx_err; - //number of wrong upstream packets - to->ifOutErros = g_atm_dev.mib_counter.tx_err; - - return 0; -} -/* Brief: Return ATM AAL5 VCC related MIB from internale use - * Parameter: - * qid - * atm_aal5_vcc_t - */ -static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to) -{ - //aal5VccCrcErrors - to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors; - to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs; - to->aal5VccSarTimeOuts = 0; //not supported yet - return 0; -} -/* Brief: Return ATM AAL5 VCC related MIB from vpi/vci - * Parameter: atm_vcc - * atm_aal5_vcc_t - */ -int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to) -{ - int qid=0; - int err=0; - qid = amazon_atm_find_vpivci(vpi, vci); - if (qid >0 ){ - err = __amazon_atm_vcc_mib(qid,to); - }else{ - return -EINVAL; - } - return err; -} - - -/* Brief: Return ATM AAL5 VCC related MIB - * Parameter: atm_vcc - * atm_aal5_vcc_t - */ -int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to) -{ - int qid=0; - int err=0; - qid = amazon_atm_get_queue(vcc); - if (qid >0 ){ - err = __amazon_atm_vcc_mib(qid,to); - }else{ - return -EINVAL; - } - return err; -} - -/* Brief: Close ATM connection - * Parameters: atm_vcc - Pointer to VCC data structure - * Return: no - * Description: - * This function closes the given ATM connection - */ -void amazon_atm_close(struct atm_vcc *vcc){ - int i; - int qid=0; - u32 tmp1; - u8 * qd_addr; - unsigned long flags; - if (vcc == NULL){ - AMAZON_TPE_EMSG("invalid parameter. vcc is null\n"); - return; - } - u32 itf = (u32) vcc->itf; - //release bandwidth - if (vcc->qos.txtp.traffic_class == ATM_CBR){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr; - }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ - g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr; - g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr; - } - - qid = amazon_atm_get_queue(vcc); - if (qid == -EINVAL){ - AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci); - return; - } - local_irq_save(flags); - //Disable HTU entry - i=0; - while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++; - if (i == HTU_RAM_ACCESS_MAX){ - AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n"); - } - - // write address register - AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR); - // invalidate the connection - AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR); - // write command - AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR); - - qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); -#ifdef AMAZON_ATM_DEBUG - tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff; - AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1); - tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff; - AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1); -#endif - // set threshold of txqueue to 0 - tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c); - tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); - AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c)); - // set threshold of rxqueue to 0 - tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c); - tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); - AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c)); - - //clear internal mapping - amazon_atm_clear_vcc(qid); - amazon_atm_clear_vcc(qid+CBM_RX_OFFSET); - - local_irq_restore(flags); -} - - -/* Brief: initialize internal data structure - */ -static void atm_constructor(amazon_atm_dev_t * dev) -{ - int i; - memset(dev,0,sizeof(amazon_atm_dev_t)); - atm_init_parameters(dev); - //internal: queue "free" flag - for(i=1;iqueues[i].vcc=NULL; - dev->queues[i].free = 1; - } - for(i=0;iports[i].tx_rem_cr = dev->ports[i].tx_max_cr; - } - //MIB - atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors -} - -/* Brief: return round up base-2 logarithm - */ -static inline int get_log_2(u32 value) -{ - int i=0,j=1; - while (i<11){ - if (j>=value) break; - j=j<<1; - i++; - } - AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i); - return i; -} - -/* Brief: TPE hardware initialization - * Parameter: specifiy the configurations of the hardware - */ -static inline int atm_init_hard(amazon_atm_dev_t * dev) -{ - int i; - u32 tmp1, tmp2, tmp3; - u8 * mem_addr=NULL; - u8 * qd_addr=NULL; - //PMU power on the module 1st - *(AMAZON_PMU_PWDCR) = (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE); - //Reset the module - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE); - mb(); - mdelay(100); - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE)); - mb(); - - unsigned long qsb_clk = amazon_get_fpi_hz()>>1; - /*********allocate & arrange memory for CBM *********/ - if (dev->cbm.mem_addr == NULL){ - dev->cbm.allocated = 1; - mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); - if (mem_addr != NULL){ - dev->cbm.mem_addr = mem_addr; - } else { - goto init_no_mem; - } - } - if (dev->cbm.qd_addr == NULL){ -#ifdef CONFIG_USE_VENUS - //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004 - //thus, we allocate 64k memory - qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4); - if (qd_addr != NULL) { - dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr)); - dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000); - }else{ - goto init_no_mem; - } -#else //CONFIG_USE_VENUS - qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL); - if (qd_addr != NULL) { - dev->cbm.qd_addr = qd_addr; - }else { - goto init_no_mem; - } -#endif //CONFIG_USE_VENUS - } -//#ifndef CONFIG_MIPS_UNCACHED - mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr); - qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr); -//#endif - //CBM reset cell queue memory, 64 bytes / cell - memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt); - //make a link list, last 4 bytes is pointer - for(i=1;icbm.free_cell_cnt;i++){ - AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c)); - } - //reset queue descriptor - memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM); - //init word 0-2 of q0 (free cell list) - //address of last cell - AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr); - //address of first cell - AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4)); - //no. of free cells - AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8)); - //init q descriptor for OAM receiving - AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); -// AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); - //config CBM - //set offset address and threshold - AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR); - AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR); - AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR); - AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR); - //config interrupts - AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR -#ifdef AMAZON_ATM_DEBUG - |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR -#endif -#ifdef AMAZON_TPE_SCR - |CBM_IMR_EF -#endif - )), CBM_IMR0_ADDR); - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR); - - //HTU - //RAM entry for number of possible connections per interface - tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0; - AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR); - for(i=1;iports[i].max_conn; - AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i); - } - dev->cbm.max_q_off = tmp1+1; - //Queue ID for OAM/RM/Other cells - AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR); - AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR); - AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR); - //Timeout - AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR); -#ifdef AMAZON_ATM_DEBUG - AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK - &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR); - AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR); -#endif - //QSB - //global setting, TstepC, SBL, Tau - //Tau - AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR); - //SBL - AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR); - //tstep - AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR); - - //port settting - for(i=0;iports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){ - tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr; - tmp2 = tmp1 / 64; //integer value of Tsb - tmp3 = tmp1%64 + 1; //fractional part of Tsb - //carry over to integer part (?) - if (tmp3 == 64) { - tmp3 = 0; - tmp2++; - } - if (tmp2 == 0){ - tmp2 = 1; - tmp3 = 1; - } - //1. set mask 2. write value to data transfer register 3. start the transfer - //SCT(FracRate) - AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<aal5.tx_max_sdu,AAL5_SMFL_ADDR); - AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR); - AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode - |AAL5_SCMD_SS - |AAL5_SCMD_AR - ,AAL5_SCMD_ADDR); - //start CBM - AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); - wmb(); - return 0; -init_no_mem: - if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); - -#ifdef CONFIG_USE_VENUS - //to work around a bug, bit15 of QDOFF address should be 1 - if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4); -#else //CONFIG_USE_VENUS - if (qd_addr != NULL) kfree(qd_addr); -#endif //CONFIG_USE_VENUS - return -ENOMEM; -} - -/* - * Brief: Create entry in /proc for status information - */ -void atm_create_proc(void) -{ - create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM); - create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB); - create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC); -#if 0 - create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5); - create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM); - create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU); - create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB); - create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE); -#endif -} - -/* - * Brief: Delete entry in /proc for status information - */ -void atm_delete_proc(void) -{ - remove_proc_entry("amazon_atm", NULL); - remove_proc_entry("amazon_atm_mib", NULL); - remove_proc_entry("amazon_atm_vcc", NULL); -#if 0 - remove_proc_entry("amazon_atm_aal5", NULL); - remove_proc_entry("amazon_atm_cbm", NULL); - remove_proc_entry("amazon_atm_htu", NULL); - remove_proc_entry("amazon_atm_qsb", NULL); - remove_proc_entry("amazon_atm_swie", NULL); -#endif -} -/* Brief: Initialize ATM module - * Parameters: no - * Return: &g_atm_dev - sucessful - * NULL - fails: - * 1. invalid parameter - * 2. No memory available - * Description: - * This function configure the TPE components according to the input info, - * -CBM - * -HTU - * -QSB - * -AAL5 - * - */ -amazon_atm_dev_t * amazon_atm_create(void) -{ - int i; - AMAZON_TPE_DMSG("atm_init\n"); - /************initialize global data structure****************/ - atm_constructor(&g_atm_dev); - /***********allocate kernel resources****************/ - //bottom halfs for SWEX - swex_start_task.routine = amazon_atm_swex; - swex_start_task.data = NULL; - swex_complete_task.routine = amazon_atm_swex_push; - swex_complete_task.data = NULL; -#ifdef AMAZON_TPE_SCR - a5r_task.routine = amazon_atm_a5r; - a5r_task.data = NULL; -#endif //AMAZON_TPE_SCR - //SWIN semaphore - sema_init(&(g_atm_dev.swie.in_sem), 1); - //SWIE lock - clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); - //SWIE wait queue - init_waitqueue_head(&(g_atm_dev.swie.sleep)); - atm_create_proc(); - - //register DMA - memset(&g_dma_dev,0,sizeof(struct dma_device_info)); - strcpy(g_dma_dev.device_name,"TPE"); - g_dma_dev.weight=1; - g_dma_dev.num_tx_chan=2; - g_dma_dev.num_rx_chan=2; - g_dma_dev.ack=1; - g_dma_dev.tx_burst_len=4; - g_dma_dev.rx_burst_len=4; - //DMA TX - - for(i=0;i<1;i++){ - g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT; - g_dma_dev.tx_chan[i].desc_num=10; - g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER; - g_dma_dev.tx_chan[i].control=1; - } - //DMA RX - for(i=0;i<2;i++){ - g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT; - /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */ - g_dma_dev.rx_chan[i].desc_num=10; - g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf); - g_dma_dev.rx_chan[i].control=1; - } - g_dma_dev.intr_handler=amazon_atm_dma_handler; - g_dma_dev.buffer_alloc=amazon_atm_alloc_rx; - g_dma_dev.buffer_free=amazon_atm_free_tx; - dma_device_register(&g_dma_dev); -/***********intialize the atm hardware ****************/ - if ( atm_init_hard(&g_atm_dev) != 0){ - return NULL; - } - //start CBM - AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); - wmb(); - - //Start HTU - AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); - wmb(); - - - // Register interrupts for insertion and extraction - request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, SA_INTERRUPT, "tpe_swie", NULL); - request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, SA_INTERRUPT, "tpe_cbm", NULL); -#ifdef AMAZON_ATM_DEBUG - request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, SA_INTERRUPT, "tpe_htu", NULL); -#endif -#ifdef AMAZON_TPE_TEST_AAL5_INT - request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, SA_INTERRUPT, "tpe_aal5", NULL); -#endif - return &g_atm_dev; -} - -/* Brief: clean up atm - * Parameters: no - * Return: no - * Description: - * Disable the device. - */ -void amazon_atm_cleanup(void){ - int i; - clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); - wake_up(&g_atm_dev.swie.sleep); - up(&g_atm_dev.swie.in_sem); - // diable SWIE interrupts - AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR); - AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR); - wmb(); - - // Disable schedulers ( including interrupts )----------------------- - for (i = 0; i < AMAZON_ATM_PORT_NUM; i++); - { - AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR); - AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR); - AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<>PAGE_SHIFT)+1)); -#ifdef CONFIG_USE_VENUS - //to work around a bug, bit15 of QDOFF address should be 1 - free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4); -#else //CONFIG_USE_VENUS - kfree(g_atm_dev.cbm.qd_addr); -#endif //CONFIG_USE_VENUS - } - atm_delete_proc(); - // free interrupts for insertion and extraction - dma_device_unregister(&g_dma_dev); - free_irq(AMAZON_SWIE_INT, NULL); - free_irq(AMAZON_CBM_INT, NULL); -#ifdef AMAZON_ATM_DEBUG - free_irq(AMAZON_HTU_INT, NULL); -#endif -#ifdef AMAZON_TPE_TEST_AAL5_INT - free_irq(AMAZON_AAL5_INT, NULL); -#endif - -} - -/************************ ATM network interface ***********************************************/ -/* Brief: getsockopt - */ -int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen) -{ - int err=0; - atm_aal5_vcc_t mib_vcc; - AMAZON_TPE_DMSG("1\n"); - switch (optname){ - case SO_AMAZON_ATM_MIB_VCC: - AMAZON_TPE_DMSG("2\n"); - err = amazon_atm_vcc_mib(vcc, &mib_vcc); - AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors); - err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc)); - AMAZON_TPE_DMSG("err %u\n",err); - break; - default: - return -EFAULT; - } - return err; -} - -/* Brief: IOCTL - */ - -int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg) -{ - int err=0; - //MIB - atm_cell_ifEntry_t mib_cell; - atm_aal5_ifEntry_t mib_aal5; - atm_aal5_vcc_x_t mib_vcc; - if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY; - if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY; - - if (_IOC_DIR(cmd) & _IOC_READ) - err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd)); - else if (_IOC_DIR(cmd) & _IOC_WRITE) - err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd)); - if (err) { - AMAZON_TPE_EMSG("acess verification fails \n"); - return -EFAULT; - } - switch(cmd) { - case AMAZON_ATM_MIB_CELL: - err = amazon_atm_cell_mib(&mib_cell,(u32)arg); - if (err==0){ - err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell)); - }else{ - AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n"); - } - break; - case AMAZON_ATM_MIB_AAL5: - err = amazon_atm_aal5_mib(&mib_aal5); - if (err==0){ - err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5)); - }else{ - AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n"); - } - break; - case AMAZON_ATM_MIB_VCC: - err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc)); - AMAZON_TPE_DMSG("return of copy_from_user %x\n",err); - err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc)); - if (err==0){ - err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc)); - }else{ - AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n"); - } - - default: - return -ENOTTY; - } - return err; -} -/* Brief: return a link list of OAM related time stamp info - * Parameter: none - * Return: - a link list of "struct oam_last_activity" data - * Description: - Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated. - Through this call, u get a list of this time stamp for all active connection. - Please note that u have read-only access. - */ -const struct oam_last_activity* get_oam_time_stamp() -{ - int i,j; - for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;ivpi; - g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci; - g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time; - g_oam_time_stamp[j].next = NULL; - j++; - } - } - if (j==0) { - return NULL; - }else{ - return g_oam_time_stamp; - } -} - - -/* Brief: call back routine for rx - * Parameter: - * vcc atm_vcc pointer - * skb data if no error - err error flag, 0: no error, 1:error - * Return: - * 0 - * <>0 cannot push up - * Description: - * release the packet if cannot push up - */ -static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err) -{ - if (err){ - if (vcc && vcc->stats) { - atomic_inc(&vcc->stats->rx_err); - } - }else{ - ATM_SKB(skb)->vcc = vcc; - - if (!atm_charge(vcc, skb->truesize)){ - //no space this vcc - AMAZON_TPE_EMSG("no space for this vcc\n"); - dev_kfree_skb_any(skb); - return -ENOMEM; - } - atomic_inc(&vcc->stats->rx); - AMAZON_TPE_DMSG("push to vcc\n"); - vcc->push(vcc,skb); - } - return 0; -} -int amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags) -{ - return amazon_atm_send_oam(vcc,cell,flags); -} - -int amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb) -{ - int err=0; - if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) { - err=amazon_atm_send(vcc,skb); - }else{ - //not supported - err = -EPROTONOSUPPORT; - } - if (err){ - atomic_inc(&vcc->stats->tx_err); - }else{ - atomic_inc(&vcc->stats->tx); - } - AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse)); - return err; -} - -int amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci) -{ - vcc->itf = (int) vcc->dev->dev_data; - vcc->vpi = vpi; - vcc->vci = vci; - return(amazon_atm_open(vcc,amazon_atm_net_push)); -} - -static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs) -{ - int qid; - - if (vcc == NULL || qos == NULL){ - AMAZON_TPE_EMSG("invalid parameters\n"); - return -EINVAL; - } - qid = amazon_atm_get_queue(vcc); - if (valid_qid(qid) != 1) { - AMAZON_TPE_EMSG("no vcc connection opened\n"); - return -EINVAL; - } - set_qsb(vcc,qos,qid); - return 0; -} - -static struct atmdev_ops amazon_atm_ops = { - open: amazon_atm_net_open, - close: amazon_atm_close, - ioctl: amazon_atm_ioctl, - send: amazon_atm_net_send, - send_oam: amazon_atm_net_send_oam, -// getsockopt: amazon_atm_getsockopt, - change_qos: amazon_atm_change_qos, -// proc_read: amazon_atm_proc_read, - owner: THIS_MODULE, -}; // ATM device callback functions - -/* - * brief "/proc" function - */ -int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data) -{ - int buf_off=0; /* for buf */ - int i=0,j=0; - int type= (u32)data;//which module - atm_aal5_ifEntry_t mib_aal5; - atm_cell_ifEntry_t mib_cell; - atm_aal5_vcc_t mib_vcc; - switch(type){ - case PROC_MIB: - //MIB counter - amazon_atm_aal5_mib(&mib_aal5); - //TX: - buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n"); - buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts); - buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros); - buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards); - buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n", - mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l); - //RX: - buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n"); - buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n", - mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l); - buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards); - buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors); - buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts); - - //Cell level - buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n"); - amazon_atm_cell_mib(&mib_cell,0); -#ifdef AMAZON_TPE_READ_ARC - buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors); - amazon_atm_cell_mib(&mib_cell,1); - buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); - buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors); -#endif - buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos); - - buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n"); - buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd); -#ifdef AMAZON_TPE_SCR - buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait); -#endif - break; - case PROC_ATM: - //Interface (Port) - buf_off+=sprintf(buf+buf_off,"[Interfaces]\n"); - for(i=0;ivpi - ,g_atm_dev.queues[i].vcc->vci - ,g_atm_dev.queues[i].vcc->itf - ,i - ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec - ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec - ); - buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" - ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class - ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr - ,g_atm_dev.queues[i].vcc->qos.txtp.pcr - ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr - ,g_atm_dev.queues[i].vcc->qos.txtp.scr - ,g_atm_dev.queues[i].vcc->qos.txtp.mbs - ,g_atm_dev.queues[i].vcc->qos.txtp.cdv - ); - buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" - ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class - ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr - ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr - ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr - ,g_atm_dev.queues[i].vcc->qos.rxtp.scr - ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs - ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv - ); - __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc); - buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors); - buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs); -#ifdef AMAZON_ATM_DEBUG - if ( valid_qid(i+CBM_RX_OFFSET)){ - buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" ); - buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]); - buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] ); - buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] ); - } - - buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" ); - buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]); - buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] ); - buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] ); - buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] ); - -#endif - - } - - } - break; - default: - break; - } - if(buf_off>0) *eof = 1; - return buf_off; -} - -#ifdef AMAZON_TPE_AAL5_RECOVERY -extern int (*tpe_reset)(void); -extern int (*tpe_start)(void); -extern int (*tpe_inject)(void); -/* Brief: Reset TPE hardware - * Description - * This is a wordaround for AAL5 bug. It tries to reset TPE. - * take care of software - * setup all previous connection - */ -int amazon_tpe_reset(void) -{ - struct atm_vcc * vcc; - int err=0; - int i; - u8 * qd_addr; - u32 reg_l, reg_h; - unsigned int a_cfg_value=0; - unsigned int a_cfg_old_value=0; - atm_aal5_ifEntry_t mib_aal5; - atm_cell_ifEntry_t mib_cell; - - //make sure all cells transmitting out first - //Segmentation done - amazon_atm_aal5_mib(&mib_aal5); - reg_l = g_atm_dev.mib_counter.tx_cnt_l; - reg_h = g_atm_dev.mib_counter.tx_cnt_h; - while(1){ - mdelay(10); - amazon_atm_aal5_mib(&mib_aal5); - if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){ - break; - } - AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n"); - reg_l = g_atm_dev.mib_counter.tx_cnt_l; - reg_h = g_atm_dev.mib_counter.tx_cnt_h; - } - //QSB done - qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); - for (i=1;i<15;i++){ - while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0 ){ - mdelay(20); - AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err); - } - } - //insurance for interfaces between Aware and CARB - mdelay(100); - amazon_atm_cell_mib(&mib_cell,0); - amazon_atm_cell_mib(&mib_cell,1); - amazon_atm_aal5_mib(&mib_aal5); - - mb(); - while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) ){ - AMAZON_TPE_EMSG("\nwaiting for AWARE"); - AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0)); - AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1)); - AMAZON_TPE_EMSG("\n"); - mdelay(1); - } - // disable AAI module - meiDebugRead(A_CFG_ADDR,&a_cfg_value,1); - a_cfg_old_value=a_cfg_value; - a_cfg_value &= (~(0x2800)); - meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1); - //clear buffer - a_cfg_value = 0x1; - meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1); - meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1); - - if ( atm_init_hard(&g_atm_dev) != 0){ - return -EIO; - } - sema_init(&(g_atm_dev.swie.in_sem), 1); - //SWIE lock - clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); - //SWIE wait queue - init_waitqueue_head(&(g_atm_dev.swie.sleep)); - - for (i=CBM_DEFAULT_Q_OFFSET;iqos, i); - set_qd(vcc, i); - mb(); - err=set_htu(vcc,i); - if (err){ - AMAZON_TPE_EMSG("set htu entry fails %u\n",err); - } - } - } - meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1); -#if 0 - //reset DFE - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE); - mb(); - *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~AMAZON_RST_REQ_DFE); - mb(); -#endif - - return 0; -} - -/* Brief: Send a ATM EoP packet to save DMA channel - */ -int amazon_tpe_inject_debug_cell(void) -{ - //Send a ATM cell to save DMA channel - u8 qid; - unsigned char atm_cell[48]; - qid = 0x11; - AMAZON_TPE_DMSG("qid = %d\n",qid); - memset(atm_cell,0,48); - atm_cell[3] = 0x2; - if ( amazon_atm_swin(qid,atm_cell)) { - AMAZON_TPE_EMSG("cannot insert EoP cell\n"); - return -1; - } - return 0; -} - -/* Brief: start HTU (TPE) - */ - -int amazon_tpe_start(void) -{ - AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); - wmb(); - return 0; -} -#endif //AMAZON_TPE_AAL5_RECOVERY - -#ifdef AMAZON_CHECK_LINK -extern int (*adsl_link_notify)(int); -/* Brief: notify link status of ADSL link - * Parameters: 0 link down - * 1 link up - * Returns: 0 OK - * Details: called by MEI driver - * should update status and inform upper layer - */ -int amazon_tpe_link_notify(int status) -{ - adsl_link_status = status; - AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down"); - if (status == 0){ - //wait until no cells in upstream queues - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(2*HZ); - } - return 0; -} -#endif //ifdef AMAZON_CHECK_LINK - -/* - * Brief: Initialize ATM module - * - * Return Value: ENOMEM - No memory available - * EBUSY - Cannot register atm device - * ERESTARTSYS - Process interrupted by other signal - * 0 - OK, module initialized - * - * Description: - * This function registers an atm device for all UTOPIA devices. - * It also allocates memory for the private device data structures - */ -int __init amazon_atm_net_init(void) -{ - int i; - int err=0; - amazon_atm_dev_t *dev = NULL; - - if ((dev=amazon_atm_create()) != NULL){ - for(i=0;iports[i].enable){ - amazon_atm_devs[i] = NULL; - continue; - } - amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL); - if (amazon_atm_devs[i] == NULL){ - AMAZON_TPE_EMSG("atm_dev_register fails\n"); - err = -EIO; - goto amazon_atm_net_init_exit; - }else{ - AMAZON_TPE_DMSG("registering device %u\n",i); - amazon_atm_devs[i]->ci_range.vpi_bits = 8; - amazon_atm_devs[i]->ci_range.vci_bits = 16; - amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr; - amazon_atm_devs[i]->dev_data = (void *) i; - } - } - - }else{ - err = -ENOMEM; - AMAZON_TPE_EMSG("cannot init atm device\n"); - goto amazon_atm_net_init_exit; - } -#ifdef AMAZON_TPE_AAL5_RECOVERY - tpe_reset = & amazon_tpe_reset; - tpe_start = & amazon_tpe_start; - tpe_inject = & amazon_tpe_inject_debug_cell; -#endif //AMAZON_TPE_AAL5_RECOVERY -#ifdef AMAZON_CHECK_LINK - adsl_link_notify=amazon_tpe_link_notify; -#endif //AMAZON_CHECK_LINK -amazon_atm_net_init_exit: - return err; -} - -void __exit amazon_atm_net_cleanup(void) -{ - int i; - amazon_atm_cleanup(); - for(i=0;i ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode, -// amazon should contrl ADM6996 by MDC/MDIO pin -// if undef ADM6996_MDC_MDIO_MODE==> ADM6996 will be in EEProm(32 bit) mode, -// amazon should contrl ADM6996 by GPIO15,16,17,18 pin -/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */ -/* 509201:linmars remove driver testing codes */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -//#include - - -unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \ - {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \ - ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF}; -unsigned int ifx_sw_bits[8] = \ - {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff}; -unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8}; -//050613:fchang -/* 507281:linmars start */ -#ifdef CONFIG_SWITCH_ADM6996_MDIO -#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin -#else -#undef ADM6996_MDC_MDIO_MODE -#endif -/* 507281:linmars end */ -#define adm6996i 0 -#define adm6996lc 1 -#define adm6996l 2 -unsigned int adm6996_mode=adm6996i; -/* - initialize GPIO pins. - output mode, low -*/ -void ifx_gpio_init(void) -{ - //GPIO16,17,18 direction:output - //GPIO16,17,18 output 0 - - AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - -} - -/* read one bit from mdio port */ -int ifx_sw_mdio_readbit(void) -{ - //int val; - - //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8; - //return val; - //GPIO16 - return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1; -} - -/* - MDIO mode selection - 1 -> output - 0 -> input - - switch input/output mode of GPIO 0 -*/ -void ifx_mdio_mode(int mode) -{ -// AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS : -// ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN); - mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO): - (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO); - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR); - mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO); - AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/ -} - -void ifx_mdc_hi(void) -{ - //GPIO_SET_HI(GPIO_MDC); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r|=GPIO_MDC; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC; -} - -void ifx_mdio_hi(void) -{ - //GPIO_SET_HI(GPIO_MDIO); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r|=GPIO_MDIO; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO; -} - -void ifx_mdcs_hi(void) -{ - //GPIO_SET_HI(GPIO_MDCS); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r|=GPIO_MDCS; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS; -} - -void ifx_mdc_lo(void) -{ - //GPIO_SET_LOW(GPIO_MDC); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r&=~GPIO_MDC; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC); -} - -void ifx_mdio_lo(void) -{ - //GPIO_SET_LOW(GPIO_MDIO); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r&=~GPIO_MDIO; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO); -} - -void ifx_mdcs_lo(void) -{ - //GPIO_SET_LOW(GPIO_MDCS); - //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS; - /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); - r&=~GPIO_MDCS; - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ - - AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS); -} - -/* - mdc pulse - 0 -> 1 -> 0 -*/ -static void ifx_sw_mdc_pulse(void) -{ - ifx_mdc_lo(); - udelay(ADM_SW_MDC_DOWN_DELAY); - ifx_mdc_hi(); - udelay(ADM_SW_MDC_UP_DELAY); - ifx_mdc_lo(); -} - -/* - mdc toggle - 1 -> 0 -*/ -static void ifx_sw_mdc_toggle(void) -{ - ifx_mdc_hi(); - udelay(ADM_SW_MDC_UP_DELAY); - ifx_mdc_lo(); - udelay(ADM_SW_MDC_DOWN_DELAY); -} - -/* - enable eeprom write - For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers -*/ -static void ifx_sw_eeprom_write_enable(void) -{ - unsigned int op; - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_hi(); - udelay(ADM_SW_CS_DELAY); - /* enable chip select */ - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - /* start bit */ - ifx_mdio_hi(); - ifx_sw_mdc_pulse(); - - /* eeprom write enable */ - op = ADM_SW_BIT_MASK_4; - while (op) - { - if (op & ADM_SW_EEPROM_WRITE_ENABLE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3); - while (op) - { - ifx_mdio_lo(); - ifx_sw_mdc_pulse(); - op >>= 1; - } - /* disable chip select */ - ifx_mdcs_lo(); - udelay(ADM_SW_CS_DELAY); - ifx_sw_mdc_pulse(); -} - -/* - disable eeprom write -*/ -static void ifx_sw_eeprom_write_disable(void) -{ - unsigned int op; - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_hi(); - udelay(ADM_SW_CS_DELAY); - /* enable chip select */ - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - /* start bit */ - ifx_mdio_hi(); - ifx_sw_mdc_pulse(); - /* eeprom write disable */ - op = ADM_SW_BIT_MASK_4; - while (op) - { - if (op & ADM_SW_EEPROM_WRITE_DISABLE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3); - while (op) - { - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - /* disable chip select */ - ifx_mdcs_lo(); - udelay(ADM_SW_CS_DELAY); - ifx_sw_mdc_pulse(); -} - -/* - read registers from ADM6996 - serial registers start at 0x200 (addr bit 9 = 1b) - EEPROM registers -> 16bits; Serial registers -> 32bits -*/ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin -static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat) -{ - addr=(addr<<16)&0x3ff0000; - AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr); - while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){}; - *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF); - return 0; -} -#endif - -static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat) -{ - unsigned int op; - - ifx_gpio_init(); - - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_lo(); - - udelay(ADM_SW_CS_DELAY); - - /* preamble, 32 bit 1 */ - ifx_mdio_hi(); - op = ADM_SW_BIT_MASK_32; - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* command start (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_START) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* read command (10b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_READ) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A9 ~ A0 */ - op = ADM_SW_BIT_MASK_10; - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* turnaround bits */ - op = ADM_SW_BIT_MASK_2; - ifx_mdio_hi(); - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - udelay(ADM_SW_MDC_DOWN_DELAY); - - /* set MDIO pin to input mode */ - ifx_mdio_mode(ADM_SW_MDIO_INPUT); - - /* start read data */ - *dat = 0; -//adm6996i op = ADM_SW_BIT_MASK_32; - op = ADM_SW_BIT_MASK_16;//adm6996i - while (op) - { - *dat <<= 1; - if (ifx_sw_mdio_readbit()) *dat |= 1; - ifx_sw_mdc_toggle(); - - op >>= 1; - } - - /* set MDIO to output mode */ - ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - /* dummy clock */ - op = ADM_SW_BIT_MASK_4; - ifx_mdio_lo(); - while(op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - ifx_mdc_lo(); - ifx_mdio_lo(); - ifx_mdcs_hi(); - - /* EEPROM registers */ -//adm6996i if (!(addr & 0x200)) -//adm6996i { -//adm6996i if (addr % 2) -//adm6996i *dat >>= 16; -//adm6996i else -//adm6996i *dat &= 0xffff; -//adm6996i } - - return 0; -} -//adm6996 -static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat) -{ - unsigned int op; - - ifx_gpio_init(); - - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_lo(); - - udelay(ADM_SW_CS_DELAY); - - /* preamble, 32 bit 1 */ - ifx_mdio_hi(); - op = ADM_SW_BIT_MASK_32; - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* command start (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_START) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* read command (10b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_READ) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A9 ~ A0 */ - op = ADM_SW_BIT_MASK_10; - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* turnaround bits */ - op = ADM_SW_BIT_MASK_2; - ifx_mdio_hi(); - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - udelay(ADM_SW_MDC_DOWN_DELAY); - - /* set MDIO pin to input mode */ - ifx_mdio_mode(ADM_SW_MDIO_INPUT); - - /* start read data */ - *dat = 0; - op = ADM_SW_BIT_MASK_32; - while (op) - { - *dat <<= 1; - if (ifx_sw_mdio_readbit()) *dat |= 1; - ifx_sw_mdc_toggle(); - - op >>= 1; - } - - /* set MDIO to output mode */ - ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - /* dummy clock */ - op = ADM_SW_BIT_MASK_4; - ifx_mdio_lo(); - while(op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - ifx_mdc_lo(); - ifx_mdio_lo(); - ifx_mdcs_hi(); - - /* EEPROM registers */ - if (!(addr & 0x200)) - { - if (addr % 2) - *dat >>= 16; - else - *dat &= 0xffff; - } - - return 0; -} - -static int ifx_sw_read(unsigned int addr, unsigned int *dat) -{ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin - ifx_sw_read_adm6996i_smi(addr,dat); -#else - if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat); - else ifx_sw_read_adm6996l(addr,dat); -#endif - return 0; - -} - -/* - write register to ADM6996 eeprom registers -*/ -//for adm6996i -start -#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin -static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat) -{ - - AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000; - while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){}; - - return 0; - -} -#endif //ADM6996_MDC_MDIO_MODE //000001.joelin - -static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat) -{ - unsigned int op; - - ifx_gpio_init(); - - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - ifx_mdcs_lo(); - ifx_mdc_lo(); - ifx_mdio_lo(); - - udelay(ADM_SW_CS_DELAY); - - /* preamble, 32 bit 1 */ - ifx_mdio_hi(); - op = ADM_SW_BIT_MASK_32; - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* command start (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_START) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* write command (01b) */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_SMI_WRITE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A9 ~ A0 */ - op = ADM_SW_BIT_MASK_10; - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* turnaround bits */ - op = ADM_SW_BIT_MASK_2; - ifx_mdio_hi(); - while (op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - udelay(ADM_SW_MDC_DOWN_DELAY); - - /* set MDIO pin to output mode */ - ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - - /* start write data */ - op = ADM_SW_BIT_MASK_16; - while (op) - { - if (op & dat) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_toggle(); - op >>= 1; - } - - // /* set MDIO to output mode */ - // ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); - - /* dummy clock */ - op = ADM_SW_BIT_MASK_4; - ifx_mdio_lo(); - while(op) - { - ifx_sw_mdc_pulse(); - op >>= 1; - } - - ifx_mdc_lo(); - ifx_mdio_lo(); - ifx_mdcs_hi(); - - /* EEPROM registers */ -//adm6996i if (!(addr & 0x200)) -//adm6996i { -//adm6996i if (addr % 2) -//adm6996i *dat >>= 16; -//adm6996i else -//adm6996i *dat &= 0xffff; -//adm6996i } - - return 0; -} -//for adm6996i-end -static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat) -{ - unsigned int op; - - ifx_gpio_init(); - - /* enable write */ - ifx_sw_eeprom_write_enable(); - - /* chip select */ - ifx_mdcs_hi(); - udelay(ADM_SW_CS_DELAY); - - /* issue write command */ - /* start bit */ - ifx_mdio_hi(); - ifx_sw_mdc_pulse(); - - /* EEPROM write command */ - op = ADM_SW_BIT_MASK_2; - while (op) - { - if (op & ADM_SW_EEPROM_WRITE) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_pulse(); - op >>= 1; - } - - /* send address A7 ~ A0 */ - op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1); - - while (op) - { - if (op & addr) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_toggle(); - op >>= 1; - } - - /* start write data */ - op = ADM_SW_BIT_MASK_16; - while (op) - { - if (op & dat) - ifx_mdio_hi(); - else - ifx_mdio_lo(); - - ifx_sw_mdc_toggle(); - op >>= 1; - } - - /* disable cs & wait 1 clock */ - ifx_mdcs_lo(); - udelay(ADM_SW_CS_DELAY); - ifx_sw_mdc_toggle(); - - ifx_sw_eeprom_write_disable(); - - return 0; -} - -static int ifx_sw_write(unsigned int addr, unsigned int dat) -{ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin - ifx_sw_write_adm6996i_smi(addr,dat); -#else //000001.joelin - if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat); - else ifx_sw_write_adm6996l(addr,dat); -#endif //000001.joelin - return 0; -} - -/* - do switch PHY reset -*/ -int ifx_sw_reset(void) -{ - /* reset PHY */ - ifx_sw_write(ADM_SW_PHY_RESET, 0); - - return 0; -} - -/* 509201:linmars start */ -#if 0 -/* - check port status -*/ -int ifx_check_port_status(int port) -{ - unsigned int val; - - if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM)) - { - ifx_printf(("error on port number (%d)!!\n", port)); - return -1; - } - - ifx_sw_read(ifx_sw_conf[port], &val); - if (ifx_sw_conf[port]%2) val >>= 16; - /* only 16bits are effective */ - val &= 0xFFFF; - - ifx_printf(("Port %d status (%.8x): \n", port, val)); - - if (val & ADM_SW_PORT_FLOWCTL) - ifx_printf(("\t802.3x flow control supported!\n")); - else - ifx_printf(("\t802.3x flow control not supported!\n")); - - if (val & ADM_SW_PORT_AN) - ifx_printf(("\tAuto negotiation ON!\n")); - else - ifx_printf(("\tAuto negotiation OFF!\n")); - - if (val & ADM_SW_PORT_100M) - ifx_printf(("\tLink at 100M!\n")); - else - ifx_printf(("\tLink at 10M!\n")); - - if (val & ADM_SW_PORT_FULL) - ifx_printf(("\tFull duplex!\n")); - else - ifx_printf(("\tHalf duplex!\n")); - - if (val & ADM_SW_PORT_DISABLE) - ifx_printf(("\tPort disabled!\n")); - else - ifx_printf(("\tPort enabled!\n")); - - if (val & ADM_SW_PORT_TOS) - ifx_printf(("\tTOS enabled!\n")); - else - ifx_printf(("\tTOS disabled!\n")); - - if (val & ADM_SW_PORT_PPRI) - ifx_printf(("\tPort priority first!\n")); - else - ifx_printf(("\tVLAN or TOS priority first!\n")); - - if (val & ADM_SW_PORT_MDIX) - ifx_printf(("\tAuto MDIX!\n")); - else - ifx_printf(("\tNo auto MDIX\n")); - - ifx_printf(("\tPVID: %d\n", \ - ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS]))); - - return 0; -} -/* - initialize a VLAN - clear all VLAN bits -*/ -int ifx_sw_vlan_init(int vlanid) -{ - ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0); - - return 0; -} - -/* - add a port to certain vlan -*/ -int ifx_sw_vlan_add(int port, int vlanid) -{ - int reg = 0; - - if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || - (vlanid > ADM_SW_MAX_VLAN_NUM)) - { - ifx_printf(("Port number or VLAN number ERROR!!\n")); - return -1; - } - ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®); - reg |= (1 << ifx_sw_vlan_port[port]); - ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg); - - return 0; -} - -/* - delete a given port from certain vlan -*/ -int ifx_sw_vlan_del(int port, int vlanid) -{ - unsigned int reg = 0; - - if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM)) - { - ifx_printf(("Port number or VLAN number ERROR!!\n")); - return -1; - } - ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®); - reg &= ~(1 << ifx_sw_vlan_port[port]); - ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg); - - return 0; -} - -/* - default VLAN setting - - port 0~3 as untag port and PVID = 1 - VLAN1: port 0~3 and port 5 (MII) -*/ -static int ifx_sw_init(void) -{ - ifx_printf(("Setting default ADM6996 registers... \n")); - - /* MAC clone, 802.1q based VLAN */ - ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30); - /* auto MDIX, PVID=1, untag */ - ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f); - ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f); - ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f); - ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f); - /* auto MDIX, PVID=2, untag */ - ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f); - /* port 0~3 & 5 as VLAN1 */ - ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155); - - return 0; -} -#endif -/* 509201:linmars end */ - -int adm_open(struct inode *node, struct file *filp) -{ - MOD_INC_USE_COUNT; - return 0; -} - -ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos) -{ - return count; -} - -ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos) -{ - return count; -} - -/* close */ -int adm_release(struct inode *inode, struct file *filp) -{ - MOD_DEC_USE_COUNT; - return 0; -} - -/* IOCTL function */ -int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args) -{ - PREGRW uREGRW; - unsigned int rtval; - unsigned int val; //6996i - unsigned int control[6] ; //6996i - unsigned int status[6] ; //6996i - - PMACENTRY mMACENTRY;//adm6996i - PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i - - if (_IOC_TYPE(cmd) != ADM_MAGIC) - { - printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC); - return (-EINVAL); - } - - if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY) - { - printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd)); - return (-EINVAL); - } - - switch (cmd) - { - case ADM_IOCTL_REGRW: - { - uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL); - rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW)); - if (rtval != 0) - { - printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n"); - return (-EFAULT); - } - - switch(uREGRW->mode) - { - case REG_READ: - uREGRW->value = 0x12345678;//inl(uREGRW->addr); - copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW)); - break; - case REG_WRITE: - //outl(uREGRW->value, uREGRW->addr); - break; - - default: - printk("No such Register Read/Write function!! \n"); - return (-EFAULT); - } - kfree(uREGRW); - break; - } - - case ADM_SW_IOCTL_REGRW: - { - unsigned int val = 0xff; - - uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL); - rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW)); - if (rtval != 0) - { - printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n"); - return (-EFAULT); - } - - switch(uREGRW->mode) - { - case REG_READ: - ifx_sw_read(uREGRW->addr, &val); - uREGRW->value = val; - copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW)); - break; - - case REG_WRITE: - ifx_sw_write(uREGRW->addr, uREGRW->value); - break; - default: - printk("No such Register Read/Write function!! \n"); - return (-EFAULT); - } - kfree(uREGRW); - break; - } -/* 509201:linmars start */ -#if 0 - case ADM_SW_IOCTL_PORTSTS: - for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++) - ifx_check_port_status(rtval); - break; - case ADM_SW_IOCTL_INIT: - ifx_sw_init(); - break; -#endif -/* 509201:linmars end */ -//adm6996i - case ADM_SW_IOCTL_MACENTRY_ADD: - case ADM_SW_IOCTL_MACENTRY_DEL: - case ADM_SW_IOCTL_MACENTRY_GET_INIT: - case ADM_SW_IOCTL_MACENTRY_GET_MORE: - - - mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL); - rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY)); - if (rtval != 0) - { - printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n"); - return (-EFAULT); - } - control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ; - control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ; - control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ; - control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4); - if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control - else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer - if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) { - //initial the pointer to the first address - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - control[5]=0x030;//initial the first address - ifx_sw_write(0x11f,control[5]); - - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - - } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) - if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address - else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address - else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - control[5]=0x02c;//search by the mac address field - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - ifx_sw_write(0x11a,control[0]); - ifx_sw_write(0x11b,control[1]); - ifx_sw_write(0x11c,control[2]); - ifx_sw_write(0x11d,control[3]); - ifx_sw_write(0x11e,control[4]); - ifx_sw_write(0x11f,control[5]); - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - val=((val&0x7000)>>12);//result ,status5[14:12] - mMACENTRY->result=val; - - if (!val) { - printk(" Command OK!! \n"); - if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) { - ifx_sw_read(0x120,&(status[0])); - ifx_sw_read(0x121,&(status[1])); - ifx_sw_read(0x122,&(status[2])); - ifx_sw_read(0x123,&(status[3])); - ifx_sw_read(0x124,&(status[4])); - ifx_sw_read(0x125,&(status[5])); - - - mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ; - mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ; - mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ; - mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ; - mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ; - mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ; - mMACENTRY->fid=(status[3]&0xf); - mMACENTRY->portmap=((status[3]>>4)&0x3f); - if (status[5]&0x2) {//static info_ctrl //status5[1]???? - mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff); - mMACENTRY->info_type=1; - } - else {//not static age_timer - mMACENTRY->ctrl.age_timer=(status[4]&0x00ff); - mMACENTRY->info_type=0; - } -//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1] - mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ??? - mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2] - }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - - } - else if (val==0x001) - printk(" All Entry Used!! \n"); - else if (val==0x002) - printk(" Entry Not Found!! \n"); - else if (val==0x003) - printk(" Try Next Entry!! \n"); - else if (val==0x005) - printk(" Command Error!! \n"); - else - printk(" UnKnown Error!! \n"); - - copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY)); - - break; - - case ADM_SW_IOCTL_FILTER_ADD: - case ADM_SW_IOCTL_FILTER_DEL: - case ADM_SW_IOCTL_FILTER_GET: - - uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL); - rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER)); - if (rtval != 0) - { - printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n"); - return (-EFAULT); - } - - if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter - uPROTOCOLFILTER->ip_p=00; //delet filter - uPROTOCOLFILTER->action=00; //delete filter - } //delete filter - - ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7 - - if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){ - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p - else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p - } - else { - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p - else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p - } - if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7 - - ifx_sw_read(0x95, &val); //protocol filter action - if(cmd==ADM_SW_IOCTL_FILTER_GET) { - uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action - copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER)); - - } - else { - val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2)); - // printk("%d----\n",val); - ifx_sw_write(0x95, val); //write protocol filter action - } - - break; -//adm6996i - - /* others */ - default: - return -EFAULT; - } - /* end of switch */ - return 0; -} - -/* Santosh: handle IGMP protocol filter ADD/DEL/GET */ -int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER) -{ - unsigned int val; //6996i - - if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter - uPROTOCOLFILTER->ip_p=00; //delet filter - uPROTOCOLFILTER->action=00; //delete filter - } //delete filter - - ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7 - - if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){ - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p - else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p - } - else { - if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p - else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p - } - if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7 - - ifx_sw_read(0x95, &val); //protocol filter action - if(cmd==ADM_SW_IOCTL_FILTER_GET) { - uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action - } - else { - val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2)); - ifx_sw_write(0x95, val); //write protocol filter action - } - - return 0; -} - - -/* Santosh: function for MAC ENTRY ADD/DEL/GET */ - -int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY) -{ - unsigned int rtval; - unsigned int val; //6996i - unsigned int control[6] ; //6996i - unsigned int status[6] ; //6996i - - // printk ("adm_process_mac_table_request: enter\n"); - - control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ; - control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ; - control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ; - control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4); - - if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control - else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer - if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) { - //initial the pointer to the first address - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - control[5]=0x030;//initial the first address - ifx_sw_write(0x11f,control[5]); - - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - - } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) - if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address - else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address - else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - control[5]=0x02c;//search by the mac address field - - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - ifx_sw_write(0x11a,control[0]); - ifx_sw_write(0x11b,control[1]); - ifx_sw_write(0x11c,control[2]); - ifx_sw_write(0x11d,control[3]); - ifx_sw_write(0x11e,control[4]); - ifx_sw_write(0x11f,control[5]); - val=0x8000;//busy ,status5[15] - while(val&0x8000){ //check busy ? - ifx_sw_read(0x125, &val); - } - val=((val&0x7000)>>12);//result ,status5[14:12] - mMACENTRY->result=val; - - if (!val) { - printk(" Command OK!! \n"); - if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) { - ifx_sw_read(0x120,&(status[0])); - ifx_sw_read(0x121,&(status[1])); - ifx_sw_read(0x122,&(status[2])); - ifx_sw_read(0x123,&(status[3])); - ifx_sw_read(0x124,&(status[4])); - ifx_sw_read(0x125,&(status[5])); - - - mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ; - mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ; - mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ; - mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ; - mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ; - mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ; - mMACENTRY->fid=(status[3]&0xf); - mMACENTRY->portmap=((status[3]>>4)&0x3f); - if (status[5]&0x2) {//static info_ctrl //status5[1]???? - mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff); - mMACENTRY->info_type=1; - } - else {//not static age_timer - mMACENTRY->ctrl.age_timer=(status[4]&0x00ff); - mMACENTRY->info_type=0; - } -//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1] - mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ??? - mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2] - }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) - - } - else if (val==0x001) - printk(" All Entry Used!! \n"); - else if (val==0x002) - printk(" Entry Not Found!! \n"); - else if (val==0x003) - printk(" Try Next Entry!! \n"); - else if (val==0x005) - printk(" Command Error!! \n"); - else - printk(" UnKnown Error!! \n"); - - // printk ("adm_process_mac_table_request: Exit\n"); - return 0; -} - -/* Santosh: End of function for MAC ENTRY ADD/DEL*/ -struct file_operations adm_ops = -{ - read: adm_read, - write: adm_write, - open: adm_open, - release: adm_release, - ioctl: adm_ioctl -}; - -int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data) -{ - int len = 0; - - len += sprintf(buf+len, " ************ Registers ************ \n"); - *eof = 1; - return len; -} - -int __init init_adm6996_module(void) -{ - unsigned int val = 000; - unsigned int val1 = 000; - - printk("Loading ADM6996 driver... \n"); - - /* if running on adm5120 */ - /* set GPIO 0~2 as adm6996 control pins */ - //outl(0x003f3f00, 0x12000028); - /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */ - //outl(0x18a, 0x12000030); - /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */ - //outl(0x417e, 0x12000040); - /* end adm5120 fixup */ -#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin - register_chrdev(69, "adm6996", &adm_ops); - AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be; - AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc; - adm6996_mode=adm6996i; - ifx_sw_read(0xa0, &val); - ifx_sw_read(0xa1, &val1); - val=((val1&0x0f)<<16)|val; - printk ("\nADM6996 SMI Mode-"); - printk ("Chip ID:%5x \n ", val); -#else //000001.joelin - - AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50; - AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff; - - AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC); - - ifx_gpio_init(); - register_chrdev(69, "adm6996", &adm_ops); - mdelay(100); - - /* create proc entries */ - // create_proc_read_entry("admide", 0, NULL, admide_proc, NULL); - -//joelin adm6996i support start - adm6996_mode=adm6996i; - ifx_sw_read(0xa0, &val); - adm6996_mode=adm6996l; - ifx_sw_read(0x200, &val1); -// printk ("\n %0x \n",val1); - if ((val&0xfff0)==0x1020) { - printk ("\n ADM6996I .. \n"); - adm6996_mode=adm6996i; - } - else if ((val1&0xffffff00)==0x71000) {//71010 or 71020 - printk ("\n ADM6996LC .. \n"); - adm6996_mode=adm6996lc; - } - else { - printk ("\n ADM6996L .. \n"); - adm6996_mode=adm6996l; - } -#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin - - if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){ -#if 0 /* removed by MarsLin */ - ifx_sw_write(0x29,0xc000); - ifx_sw_write(0x30,0x0985); -#else - ifx_sw_read(0xa0, &val); - if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch - ifx_sw_write(0x29, 0x9000); - ifx_sw_write(0x30,0x0985); -#endif - } -//joelin adm6996i support end - return 0; -} - -void __exit cleanup_adm6996_module(void) -{ - printk("Free ADM device driver... \n"); - - unregister_chrdev(69, "adm6996"); - - /* remove proc entries */ - // remove_proc_entry("admide", NULL); -} - -/* MarsLin, add start */ -#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE) - #define SET_BIT(reg, mask) reg |= (mask) - #define CLEAR_BIT(reg, mask) reg &= (~mask) - static int ifx_hw_reset(void) - { - CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000); - CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000); - SET_BIT((*AMAZON_GPIO_P0_OD),0x2000); - SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000); - CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000); - mdelay(500); - SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000); - cleanup_adm6996_module(); - return init_adm6996_module(); - } - int (*adm6996_hw_reset)(void) = ifx_hw_reset; - EXPORT_SYMBOL(adm6996_hw_reset); - EXPORT_SYMBOL(adm6996_mode); - int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read; - EXPORT_SYMBOL(adm6996_sw_read); - int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write; - EXPORT_SYMBOL(adm6996_sw_write); -#endif -/* MarsLin, add end */ - -/* Santosh: for IGMP proxy/snooping, Begin */ -EXPORT_SYMBOL (adm_process_mac_table_request); -EXPORT_SYMBOL (adm_process_protocol_filter_request); -/* Santosh: for IGMP proxy/snooping, End */ - -MODULE_DESCRIPTION("ADMtek 6996 Driver"); -MODULE_AUTHOR("Joe Lin "); -MODULE_LICENSE("GPL"); - -module_init(init_adm6996_module); -module_exit(cleanup_adm6996_module); - diff --git a/target/linux/amazon-2.6/files/drivers/char/amazon_mei.c b/target/linux/amazon-2.6/files/drivers/char/amazon_mei.c deleted file mode 100644 index 7efe52ed60..0000000000 --- a/target/linux/amazon-2.6/files/drivers/char/amazon_mei.c +++ /dev/null @@ -1,7918 +0,0 @@ -/* ============================================================================ - * Copyright (C) 2004 -Infineon Technologies AG. - * - * All rights reserved. - * ============================================================================ - * - *============================================================================ - * Licensed under GNU GPL v2 - * ============================================================================ - */ - - -/* =========================================================================== - * - * File Name: amazon_mei.c - * Author : Ou Ke - * - * =========================================================================== - * - * Project: Amazon - * - * =========================================================================== - * Contents:This file implements the MEI driver for Amazon ADSL/ADSL2+ - * controller. - * - * =========================================================================== - * References: - * - */ - - -/* =========================================================================== - * Revision History: - * 12/1/2005 : Ritesh Banerjee - * - Create a kernel thread kmibpoll to poll for periodic RFC 2662 - * and RFC 3440 counters. Removes the need for user space - * adsl_mibpoll_daemon and saves atleast 30KB of RAM. - * - * $Log$ - * =========================================================================== - */ - -/* - * =========================================================================== - * INCLUDE FILES - * =========================================================================== - */ -//000002:fchang 2005/6/2 joelin 04/27/2005 for pcm clock -//000003:fchang 2005/6/2 Henry added for Amazon-E support -//165001:henryhsu 2005/9/6 Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash. -// 509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC -// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics - -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB -#endif -#define AMAZON_MEI_MIB_RFC3440 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#define SET_BIT(reg, mask) reg |= (mask) -#define CLEAR_BIT(reg, mask) reg &= (~mask) -#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) -#define SET_BITS(reg, mask) SET_BIT(reg, mask) -#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} - -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); - -#ifdef AMAZON_CHECK_LINK -//amazon_tpe.c -extern int (*adsl_link_notify)(int); -#endif //AMAZON_CHECK_LINK - -// for ARC memory access -#define WHILE_DELAY 20000 -#define AMAZON_DMA_DEBUG_MUTEX - - -//TODO -#undef DFE_LOOPBACK -#define ARC_READY_ACK - -static amazon_mei_mib * current_intvl; -static struct list_head interval_list; -static amazon_mei_mib * mei_mib; - -static int reboot_firsttime=1;//000002:fchang - - //PCM -#define PCM_CHANNEL_NUM 2 //1 rx, 1 tx -static pcm_data_struct pcm_data[PCM_CHANNEL_NUM]__attribute__ ((aligned(4))); //0=tx0, 1=rx0, 2=tx1, 3=rx1 -static u32 pcm_start_addr; -//#define PCM_HRT_TIME_HZ 4000 //?us -#define PCM_ACCESS_DEBUG -static int irqtimes=0; -#undef DATA_LED_ON_MODE -#define ADSL_LED_SUPPORT //joelin for adsl led -#ifdef ADSL_LED_SUPPORT -static int firmware_support_led=0; //joelin version check for adsl led -static int stop_led_module=0; //wakeup and clean led module -static int led_support_check=0; //1.1.2.7.1.1 -#endif //ADSL_LED_SUPPORT -#define IFX_DYING_GASP -#ifdef IFX_DYING_GASP -static wait_queue_head_t wait_queue_dying_gasp; //dying gasp -//struct tq_struct dying_gasp_task; //dying gasp -static wait_queue_head_t wait_queue_uas_poll; //joelin 04/16/2005 -static u16 unavailable_seconds=0; //joelin 04/16/2005 -static meidebug lop_debugwr; //dying gasp -#endif //IFX_DYING_GASP -static int dbg_int=0; -//#define DEBUG_ACCESS_DELAY for(dbg_int=0;dbg_int<100;dbg_int++){;} -#define DEBUG_ACCESS_DELAY -static u8 sampledata[512]; -static int firsttime[PCM_CHANNEL_NUM]={0,1}; -static int num_cmp[PCM_CHANNEL_NUM]={0,0}; -static int pcm_start_loc[PCM_CHANNEL_NUM]={0,0}; - - // for clearEoC -//#define MEI_CLREOC_BUFF_SIZE 512 //double the receive fifo size, bytes -//static u8 clreoc[MEI_CLREOC_BUFF_SIZE]__attribute__ ((aligned(4))); //buffer to hold clearEoC data in bytes -#undef AMAZON_CLEAR_EOC -#ifdef AMAZON_CLEAR_EOC -extern void ifx_push_eoc(struct sk_buff * pkt); -#endif -static int meiResetArc(void); -#define IFX_POP_EOC_DONE 0 -#define IFX_POP_EOC_FAIL -1 -static struct list_head clreoc_list; -static amazon_clreoc_pkt * clreoc_pkt; -#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered -//static int clreoc_wr=0; -//static int clreoc_rd=0; //used to control clreoc circular buffer -static wait_queue_head_t wait_queue_clreoc; -#ifdef ADSL_LED_SUPPORT -static wait_queue_head_t wait_queue_led; //adsl led -static wait_queue_head_t wait_queue_led_polling;// adsl led -struct tq_struct led_task; // adsl led -static DECLARE_TASK_QUEUE(tq_ifx_led); // task -int adsl_led_flash_task(void *ptr); // adsl led -#endif //ADSL_LED_SUPPORT -static void * clreoc_command_pkt=NULL; -static int clreoc_max_tx_len=0; - -// 603221:tc.chen start -#define ME_HDLC_IDLE 0 -#define ME_HDLC_INVALID_MSG 1 -#define ME_HDLC_MSG_QUEUED 2 -#define ME_HDLC_MSG_SENT 3 -#define ME_HDLC_RESP_RCVD 4 -#define ME_HDLC_RESP_TIMEOUT 5 -#define ME_HDLC_RX_BUF_OVERFLOW 6 -#define ME_HDLC_UNRESOLVED 1 -#define ME_HDLC_RESOLVED 2 -// 603221:tc.chen end - -#ifdef LOCK_RETRY -static int reboot_lock=0; -#endif - -static mib_previous_read mib_pread={0,0,0,0,0,0,0,0,0,0,0,0}; -static mib_flags_pretime mib_pflagtime;// initialized when module loaded - - static u32 ATUC_PERF_LOFS=0; - static u32 ATUC_PERF_LOSS=0; - static u32 ATUC_PERF_ESS=0; - static u32 ATUC_PERF_INITS=0; - static u32 ATUR_PERF_LOFS=0; - static u32 ATUR_PERF_LOSS=0; - static u32 ATUR_PERF_LPR=0; - static u32 ATUR_PERF_ESS=0; - static u32 ATUR_CHAN_RECV_BLK=0; - static u32 ATUR_CHAN_TX_BLK=0; - static u32 ATUR_CHAN_CORR_BLK=0; - static u32 ATUR_CHAN_UNCORR_BLK=0; - //RFC-3440 - static u32 ATUC_PERF_STAT_FASTR=0; - static u32 ATUC_PERF_STAT_FAILED_FASTR=0; - static u32 ATUC_PERF_STAT_SESL=0; - static u32 ATUC_PERF_STAT_UASL=0; - static u32 ATUR_PERF_STAT_SESL=0; - static u32 ATUR_PERF_STAT_UASL=0; - - static adslChanPrevTxRate PrevTxRate={0,0}; - static adslPhysCurrStatus CurrStatus={0,0}; - static ChanType chantype={0,0}; - static adslLineAlarmConfProfileEntry AlarmConfProfile={"No Name\0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1}; -// 603221:tc.chen start - static adslFarEndPerfStats FarendStatsData; - struct timeval FarendData_acquire_time={0}; - static u32 adsl_mode,adsl_mode_extend; // adsl mode : adsl/ 2/ 2+ - static adslInitStats AdslInitStatsData; -//603221:tc.chen end -static u32 loop_diagnostics_mode=0; -static wait_queue_head_t wait_queue_loop_diagnostic; -#ifdef AMAZON_MEI_MIB_RFC3440 - static adslLineAlarmConfProfileExtEntry AlarmConfProfileExt={"No Name\0",0,0,0,0,0,0}; -#endif - -static int showtime=0; -static int loop_diagnostics_completed=0; -////////////////////////////////////////////////////////////////////////////////// -static int phy_mei_net_init(struct net_device * dev); -static int interleave_mei_net_init(struct net_device * dev); -static int fast_mei_net_init(struct net_device * dev); -static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev); -static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev); -static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev); - -typedef struct mei_priv{ - struct net_device_stats stats; -}mei_priv; - -static struct net_device phy_mei_net = { init: phy_mei_net_init, name: "MEI_PHY"}; -static struct net_device interleave_mei_net = { init: interleave_mei_net_init, name: "MEI_INTL"}; -static struct net_device fast_mei_net = { init: fast_mei_net_init, name: "MEI_FAST"}; -/////////////////////////////////////////////////////////////////////////////////// - -static int major=AMAZON_MEI_MAJOR; - -static struct semaphore mei_sema; - -// Mei to ARC CMV count, reply count, ARC Indicator count -static int indicator_count=0; -static int cmv_count=0; -static int reply_count=0; -static u16 Recent_indicator[MSG_LENGTH]; - -// Used in interrupt handler as flags -static int arcmsgav=0; -static int cmv_reply=0; -static int cmv_waiting=0; - -#define PROC_ITEMS 8 - -long mei_debug_mode = 0; //509221:tc.chen for adsl firmware debug - -// to wait for arc cmv reply, sleep on wait_queue_arcmsgav; -static wait_queue_head_t wait_queue_arcmsgav; -static wait_queue_head_t wait_queue_codeswap; -static wait_queue_head_t wait_queue_mibdaemon; -static wait_queue_head_t wait_queue_reboot; -static u32 * image_buffer=NULL; // holding adsl firmware image -static u16 RxMessage[MSG_LENGTH]__attribute__ ((aligned(4))); -static u16 TxMessage[MSG_LENGTH]__attribute__ ((aligned(4))); -static u32 * mei_arc_swap_buff=NULL; // holding swap pages -static ARC_IMG_HDR * img_hdr; -static int reboot_flag; - -#ifdef DFE_LOOPBACK -#include "arc_pm.h" -#endif - - -///////////////// net device /////////////////////////////////////////////////// -static int phy_mei_net_init(struct net_device * dev) -{ - //ether_setup(dev); - dev->get_stats = phy_mei_net_get_stats; - dev->ip_ptr = NULL; - dev->type = 94; - -// dev->mtu=12345; - dev->flags=IFF_UP; - - dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); - if(dev->priv == NULL) - return -ENOMEM; - memset(dev->priv, 0, sizeof(struct mei_priv)); - return 0; -} - -static int interleave_mei_net_init(struct net_device * dev) -{ - //ether_setup(dev); - dev->get_stats = interleave_mei_net_get_stats; - dev->ip_ptr = NULL; - dev->type = 124; - dev->flags=IFF_UP; - dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); - if(dev->priv == NULL) - return -ENOMEM; - memset(dev->priv, 0, sizeof(struct mei_priv)); - return 0; -} - -static int fast_mei_net_init(struct net_device * dev) -{ - //ether_setup(dev); - dev->get_stats = fast_mei_net_get_stats; - dev->ip_ptr = NULL; - dev->type = 125; - dev->flags=IFF_UP; - dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); - if(dev->priv == NULL) - return -ENOMEM; - memset(dev->priv, 0, sizeof(struct mei_priv)); - return 0; -} - -static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev) -{ - struct mei_priv * priv; - priv = (struct mei_priv *)dev->priv; - // update statistics - (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; - (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; - (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; - (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; - - return &(priv->stats); -} - -static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev) -{ - struct mei_priv * priv; - priv = (struct mei_priv *)dev->priv; - // update statistics - (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; - (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; - (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; - (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; - - return &(priv->stats); -} - -static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev) -{ - struct mei_priv * priv; - priv = (struct mei_priv *)dev->priv; - // update statistics - (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; - (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; - (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; - (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; - - return &(priv->stats); -} -///////////////// mei access Rd/Wr methods /////////////////////////////////////////////////// -void meiLongwordWrite(u32 ul_address, u32 ul_data) -{ - *((volatile u32 *)ul_address) = ul_data; - asm("SYNC"); - return; -} // end of "meiLongwordWrite(..." - -void meiLongwordRead(u32 ul_address, u32 *pul_data) -{ - *pul_data = *((volatile u32 *)ul_address); - asm("SYNC"); - return; -} // end of "meiLongwordRead(..." - -MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( destaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the write transfer address - meiLongwordWrite(MEI_XFR_ADDR, destaddr); - - // Write the data pushed across DMA - while (databuffsize--) - { - temp = *p; - if(databuff==(u32 *)TxMessage) // swap half word - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); - meiLongwordWrite(MEI_DATA_XFR, temp); - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMAWrite(..." - -MEI_ERROR meiDMAWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( destaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the write transfer address - meiLongwordWrite(MEI_XFR_ADDR, destaddr); - - // Write the data pushed across DMA - while (databuffsize--) - { - temp = *p; - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word - meiLongwordWrite(MEI_DATA_XFR, temp); - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMAWrite_16(..." - -MEI_ERROR meiDMAWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( destaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the write transfer address - meiLongwordWrite(MEI_XFR_ADDR, destaddr); - - // Write the data pushed across DMA - while (databuffsize--) - { - temp = *p; - temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte - meiLongwordWrite(MEI_DATA_XFR, temp); - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMAWrite_8(..." - -MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( srcaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the read transfer address - meiLongwordWrite(MEI_XFR_ADDR, srcaddr); - - // Read the data popped across DMA - while (databuffsize--) - { - meiLongwordRead(MEI_DATA_XFR, &temp); - if(databuff==(u32 *)RxMessage) // swap half word - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); - *p=temp; - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMARead(..." - -MEI_ERROR meiDMARead_16(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( srcaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the read transfer address - meiLongwordWrite(MEI_XFR_ADDR, srcaddr); - - // Read the data popped across DMA - while (databuffsize--) - { - meiLongwordRead(MEI_DATA_XFR, &temp); - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); - *p=temp; - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMARead_16(..." - -MEI_ERROR meiDMARead_8(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 *p = databuff; - u32 temp; - u32 flags; - - if( srcaddr & 3) - return MEI_FAILURE; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Set the read transfer address - meiLongwordWrite(MEI_XFR_ADDR, srcaddr); - - // Read the data popped across DMA - while (databuffsize--) - { - meiLongwordRead(MEI_DATA_XFR, &temp); - temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte - *p=temp; - p++; - } // end of "while(..." - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - return MEI_SUCCESS; - -} // end of "meiDMARead_8(..." - -void meiPollForDbgDone(void) -{ - u32 query = 0; - int i=0; - while (i>8)+ ((temp & 0xff000000)>>24);//swap byte - meiLongwordWrite(MEI_DEBUG_DATA, temp); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugWrite_8(..." - -MEI_ERROR meiDebugRead_8(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and read the data - address = srcaddr; - buffer = databuff; - for (i=0; i>8)+ ((temp & 0xff000000)>>24);//swap byte - *buffer=temp; - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugRead_8(..." - -MEI_ERROR meiDebugWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and write the data - address = destaddr; - buffer = databuff; - for (i=0; i < databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_WAD, address); - DEBUG_ACCESS_DELAY; - temp=*buffer; - temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word - meiLongwordWrite(MEI_DEBUG_DATA, temp); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugWrite_16(..." - -MEI_ERROR meiDebugRead_16(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and read the data - address = srcaddr; - buffer = databuff; - for (i=0; i>16);//swap half word - *buffer=temp; - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugRead_16(..." - -MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and write the data - address = destaddr; - buffer = databuff; - for (i=0; i < databuffsize; i++) - { - meiLongwordWrite(MEI_DEBUG_WAD, address); - DEBUG_ACCESS_DELAY; - temp=*buffer; - meiLongwordWrite(MEI_DEBUG_DATA, temp); - DEBUG_ACCESS_DELAY; - meiPollForDbgDone(); - address += 4; - buffer++; - } // end of "for(..." - - // Close the debug port after DMP memory write - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - restore_flags(flags); -#endif - - // Return - return MEI_SUCCESS; - -} // end of "meiDebugWrite(..." - -MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize) -{ - u32 i; - u32 temp = 0x0; - u32 address = 0x0; - u32 *buffer = 0x0; - u32 flags; - -#ifdef AMAZON_DMA_DEBUG_MUTEX - save_flags(flags); - cli(); -#endif - - - // Open the debug port before DMP memory read - meiLongwordRead(MEI_CONTROL, &temp); - DEBUG_ACCESS_DELAY; - temp |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, temp); - DEBUG_ACCESS_DELAY; - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); - DEBUG_ACCESS_DELAY; - - // For the requested length, write the address and read the data - address = srcaddr; - buffer = databuff; - for (i=0; icount; boot_loop++) - { - if( img_hdr->page[boot_loop].p_size & BOOT_FLAG) - { - page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0) - { - meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size); - } - } - if( img_hdr->page[boot_loop].d_size & BOOT_FLAG) - { - page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0) - { - meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size); - } - } - } -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n pages downloaded"); -#endif - return MEI_SUCCESS; - -} // end of "meiDownloadBootCode(..." - -MEI_ERROR meiRunArc(void) -{ - u32 arc_control_mode = 0x0; - u32 arc_debug_addr = 0x0; - u32 arc_debug_data = 0x0; - - // Switch arc control from JTAG mode to MEI mode- write '1' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode |= (HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - // Write arc aux reg access mask (0x0) into debug addr decode reg - meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK); - - // Write arc status aux reg addr (0x0) into debug read addr reg - meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr); - meiPollForDbgDone(); - - // Read debug data reg and save content - meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data); - - // Write arc status aux reg addr (0x0) into debug write addr reg - meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr); - - // Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared) - arc_debug_data &= ~(BIT25); - meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data); - meiPollForDbgDone(); - - // Switch arc control from MEI mode to JTAG mode- write '0' to bit0 - meiLongwordRead(MEI_CONTROL, &arc_control_mode); - arc_control_mode &= ~(HOST_MSTR); - meiLongwordWrite(MEI_CONTROL, arc_control_mode); - - // Enable mask for arc codeswap interrupts - meiMailboxInterruptsEnable(); - - // Return - return MEI_SUCCESS; - -} // end of "meiActivate(..." - -int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest) -{ - u32 size; - u32 i; - u32 *p; - - if( Page > img_hdr->count) - return -2; - - /* - ** Get program or data size, depending on "data" flag - */ - size = (data == GET_DATA) ? img_hdr->page[ Page].d_size : img_hdr->page[ Page].p_size; - - size &= BOOT_FLAG_MASK; // Clear boot bit! - if( size > MaxSize) - return -1; - - if( size == 0) - return 0; - /* - ** Get program or data offset, depending on "data" flag - */ - i = data ? img_hdr->page[ Page].d_offset : img_hdr->page[ Page].p_offset; - - /* - ** Copy data/program to buffer - */ - - i /= 4; // Adjust offset for byte-to-UINT for array operation - - p = (u32 *)img_hdr + i; - for(i = 0; i < size; i++) - Buffer[i] = *p++; - /* - ** Pass back data/program destination address - */ - *Dest = data ? img_hdr->page[Page].d_dest : img_hdr->page[Page].p_dest; - - return size; -} - -MEI_ERROR meiCMV(u16 * request, int reply) // write cmv to arc, if reply needed, wait for reply -{ - MEI_ERROR meierror; - wait_queue_t wait; - - cmv_reply=reply; - - meierror = meiMailboxWrite(request, MSG_LENGTH); - - if(meierror != MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n MailboxWrite Fail."); -#endif - return meierror; - } - else{ - cmv_count++; - } - - if(cmv_reply == NO_REPLY) - return MEI_SUCCESS; - - init_waitqueue_entry(&wait, current); - add_wait_queue(&wait_queue_arcmsgav, &wait); - set_current_state(TASK_INTERRUPTIBLE); -// cmv_waiting=1; - - if(arcmsgav==1){ - set_current_state(TASK_RUNNING); - remove_wait_queue(&wait_queue_arcmsgav, &wait); - } - else{ - schedule_timeout(CMV_TIMEOUT); - remove_wait_queue(&wait_queue_arcmsgav, &wait); - } - if(arcmsgav==0){//CMV_timeout - cmv_waiting=0; - arcmsgav=0; -#ifdef AMAZON_MEI_DEBUG_ON - printk("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n"); -#endif - return MEI_MAILBOX_TIMEOUT; - } - else{ - arcmsgav=0; - reply_count++; - return MEI_SUCCESS; - } -} - -//TODO, for loopback test -#ifdef DFE_LOOPBACK -#define mte_reg_base (0x4800*4+0x20000) - -/* Iridia Registers Address Constants */ -#define MTE_Reg(r) (int)(mte_reg_base + (r*4)) - -#define IT_AMODE MTE_Reg(0x0004) - - -#define OMBOX_BASE 0x15F80 -#define IMBOX_BASE 0x15FC0 - -#define TIMER_DELAY (1024) -#define BC0_BYTES (32) -#define BC1_BYTES (30) -#define NUM_MB (12) -#define TIMEOUT_VALUE 2000 - -void BFMWait (u32 cycle) { - u32 i; - for (i = 0 ; i< cycle ; i++); -} - -void WriteRegLong(u32 addr, u32 data){ - //printk("[%8x] <= %8x \n\n", addr, data); - *((volatile u32 *)(addr)) = data; -} - -u32 ReadRegLong (u32 addr) { - u32 rd_val; - - rd_val = *((volatile u32 *)(addr)); - //printk("[%8x] => %8x \n\n", addr, rd_val); - return rd_val; - -} - -/* This routine writes the mailbox with the data in an input array */ -void WriteMbox(u32 *mboxarray,u32 size) { - u32 i; - - WriteRegLong(MEI_XFR_ADDR,IMBOX_BASE); - for (i=0;if_dentry->d_inode)->i_ino; - char outputbuf[64]; - int count=0; - int i; - u32 version=0; - reg_entry_t* current_reg=NULL; - - for (i=0;iflag == (int *) 8){ - ///proc/mei/version - //format: - //Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl - //Firmware Date Time Code: date/month min:hour - if (*ppos>0) /* Assume reading completed in previous read*/ - return 0; // indicates end of file - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - //if (indicator_count != 1){ - if (indicator_count < 1){ - up(&mei_sema); - return -EAGAIN; - } - //major:bits 0-7 - //minor:bits 8-15 - makeCMV(H2D_CMV_READ, INFO, 54, 0, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EIO; - } - version = RxMessage[4]; - count = sprintf(outputbuf, "%d.%d.",(version)&0xff,(version>>8)&0xff); - - //sub_version:bits 4-7 - //int_version:bits 0-3 - //spl_appl:bits 8-13 - //rel_state:bits 14-15 - makeCMV(H2D_CMV_READ, INFO, 54, 1, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EFAULT; - } - version =RxMessage[4]; - count += sprintf(outputbuf+count, "%d.%d.%d.%d", - (version>>4)&0xf, - version&0xf, - (version>>14)&0x3, - (version>>8)&0x3f); -#ifdef ADSL_LED_SUPPORT -// version check -start for adsl led - if ((((version>>4)&0xf)==2)&&((version&0xf)>=3)&&((version&0xf)<7)) firmware_support_led=1; - else if ((((version>>4)&0xf)==2)&&((version&0xf)>=7)) firmware_support_led=2; - else if (((version>>4)&0xf)>2) firmware_support_led=2; - -//165001:henryhsu:20050906:Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash. - //else firmware_support_led=0; - else firmware_support_led=2; -//165001 - - -// version check -end -#endif - //Date:bits 0-7 - //Month:bits 8-15 - makeCMV(H2D_CMV_READ, INFO, 55, 0, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EIO; - } - version = RxMessage[4]; - - //Hour:bits 0-7 - //Minute:bits 8-15 - makeCMV(H2D_CMV_READ, INFO, 55, 1, 1, NULL); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#if 0 -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n WINHOST CMV fail"); -#endif -#endif - up(&mei_sema); - return -EFAULT; - } - version += (RxMessage[4]<<16); - count += sprintf(outputbuf+count, " %d/%d %d:%d\n" - ,version&0xff - ,(version>>8)&0xff - ,(version>>25)&0xff - ,(version>>16)&0xff); - - up(&mei_sema); - - *ppos+=count; - }else if(current_reg->flag != (int *)Recent_indicator){ - if (*ppos>0) /* Assume reading completed in previous read*/ - return 0; // indicates end of file - count = sprintf(outputbuf, "0x%08X\n\n", *(current_reg->flag)); - *ppos+=count; - if (count>nbytes) /* Assume output can be read at one time */ - return -EINVAL; - }else{ - if((int)(*ppos)/((int)7)==16) - return 0; // indicate end of the message - count = sprintf(outputbuf, "0x%04X\n\n", *(((u16 *)(current_reg->flag))+ (int)(*ppos)/((int)7))); - *ppos+=count; - } - if (copy_to_user(buf, outputbuf, count)) - return -EFAULT; - return count; -} - -static ssize_t proc_write(struct file * file, const char * buffer, size_t count, loff_t *ppos) -{ - int i_ino = (file->f_dentry->d_inode)->i_ino; - reg_entry_t* current_reg=NULL; - int i; - unsigned long newRegValue; - char *endp; - - for (i=0;iflag == (int *)Recent_indicator)) - return -EINVAL; - - newRegValue = simple_strtoul(buffer,&endp,0); - *(current_reg->flag)=(int)newRegValue; - return (count+endp-buffer); -} -////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]/////////////////////////// -void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data) -{ - memset(TxMessage, 0, MSG_LENGTH*2); - TxMessage[0]= (opcode<<4) + (size&0xf); - TxMessage[1]= (((index==0)?0:1)<<7) + (group&0x7f); - TxMessage[2]= address; - TxMessage[3]= index; - if(opcode == H2D_CMV_WRITE) - memcpy(TxMessage+4, data, size*2); - return; -} - -////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]/////////////////////////// -void makeCMV_local(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,u16 *CMVMSG) -{ - memset(CMVMSG, 0, MSG_LENGTH*2); - CMVMSG[0]= (opcode<<4) + (size&0xf); - CMVMSG[1]= (((index==0)?0:1)<<7) + (group&0x7f); - CMVMSG[2]= address; - CMVMSG[3]= index; - if(opcode == H2D_CMV_WRITE) - memcpy(CMVMSG+4, data, size*2); - return; -} - -//////////////// Driver Structure ///////////////////////////////////////////////////////////////////////////// -static ssize_t mei_write(struct file *, const char *, size_t, loff_t *); -static int mei_ioctl(struct inode *, struct file *, unsigned int, unsigned long); - -static struct file_operations mei_operations = { - write: mei_write, - ioctl: mei_ioctl, -}; - - -static ssize_t mei_write(struct file * filp, const char * buf, size_t size, loff_t * loff) -{ -// printk("\n\n mei_write entered"); -// image_buffer = (u32 *)kmalloc(size, GFP_KERNEL); - image_buffer = (u32 *)vmalloc(size); -// printk("\n\n image_buffer kmalloc done"); - if(image_buffer == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n kmalloc for firmware image fail"); - printk("\n\n vmalloc for firmware image fail"); -#endif - return -1; - } - copy_from_user((char *)image_buffer, buf, size); -// printk("\n\n copy_from_user done"); - return size; -} - - ////////// ISR GPTU Timer 6 for high resolution timer ///////////// -void amazon_timer6_interrupt_MEI(int irq, void *dev_id, struct pt_regs *regs) -{ - int i,j; - u32 temp; - u16 temp16; - u16 rdindex, wrindex; - u16 num_rd=0; //num of byte can be read - u16 bytes_to_wr=0; - -// printk("\n\nenter timer\n\n"); - irqtimes++; -// printk("\n%d\n",irqtimes); - - -/* -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_8(0x30f20, &temp, 1); -#else - meiDMARead_8(0x30f20, &temp, 1); -#endif - if((temp&0x4000)!=0){ - printk("\nER_ERR"); -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_8(0x30f20, &temp, 1); -#else - meiDMAWrite_8(0x30f20, &temp, 1); -#endif -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_8(0x30f20, &temp, 1); -#else - meiDMARead_8(0x30f20, &temp, 1); -#endif - if((temp&0x4000)!=0) - printk("\nER_ERR not cleared"); - } -*/ - - for(i=PCM_CHANNEL_NUM-1;i>=0;i--){// start from last channel, which is rx -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); -#endif - wrindex = (u16)((temp & 0xffff0000)>>16); -// printk(" %d",wrindex); -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1); -#endif - rdindex = (u16)(temp & 0xffff); -// printk(" %d",rdindex); - if(rdindex<=wrindex) - num_rd=((wrindex-rdindex)/4)*4; //read multiply of 4 bytes - else - num_rd=((pcm_data[i].len-(rdindex-wrindex))/4)*4; //read multiply of 4 bytes - - if(i%2!=0){//rx channel - pcm_data[i].point=0; - for(j=0;j=pcm_data[i].len) - temp16=(rdindex+j*4) - pcm_data[i].len; - else - temp16=rdindex+j*4; -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1); -#else - meiDMARead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1); -#endif - // printk(" %8x", *((u32*)(pcm_data[i].buff+pcm_data[i].point))); - /* if(pcm_data[i].point==0){ - if(pcm_data[i].buff[0]==0xA5){// start of loopback data - pcm_data[i].point+=4; - printk("\nstart receive data"); - } - } - else*/ - pcm_data[i].point+=4; - /* if(pcm_data[i].point==PCM_BUFF_SIZE){ //finish rx - pcm_data[i].finish=1; - printk("\nchannel[%d] finished", i); - } */ - } - } - if(firsttime[i]==1){ - for(j=0;j=256) - pcm_start_loc[i]=pcm_start_loc[i]-256; - } - } - - rdindex +=num_rd; - if(rdindex>=pcm_data[i].len) - rdindex=rdindex-pcm_data[i].len; -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1); -#endif - temp= (temp & 0xffff0000) + rdindex; -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex -#else - meiDMAWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex -#endif - - bytes_to_wr = num_rd; - - // if(bytes_to_wr>0){ - // printk(" %d", num_rd); - // printk(" %d", rdindex); -// printk("\n\nrdindex = %d", rdindex); - //} - } - else{ //tx channel - // if((bytes_to_wr + num_rd) < pcm_data[i].len){ - for(j=0;j=pcm_data[i].len) - temp16=(wrindex+j*4) - pcm_data[i].len; - else - temp16=wrindex + j*4; -/* -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1); -#else - meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1); -#endif*/ - -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1); - // meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff), 1); -#else - meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1); -#endif - pcm_data[i].point+=4; - if(pcm_data[i].point==PCM_BUFF_SIZE){ - // pcm_data[i].finish=1; - // printk("\nchannel[%d] finished", i); - pcm_data[i].point=0; - } - } - } - wrindex+=bytes_to_wr; - if(wrindex>=pcm_data[i].len) - wrindex=wrindex-pcm_data[i].len; -#ifdef PCM_ACCESS_DEBUG - meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); -#else - meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); -#endif - temp=(temp&0xffff) + (wrindex<<16); -#ifdef PCM_ACCESS_DEBUG - meiDebugWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex -#else - meiDMAWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex -#endif - - //if(bytes_to_wr>0){ - // printk(" %d", bytes_to_wr); - // printk(" %d", wrindex); -// printk("\n\nwrindex = %d", wrindex); - //} - // } - } - } - return; -} -//000002:fchang Start -static int meiResetArc(void) -{ - u32 auxreg0; - u32 auxreg5; - int flshcnt=0; - int flshcnt1=0; - int flshcnt2=0; - - meiLongwordWrite(MEI_CONTROL, 1); - meiLongwordWrite(MEI_DEBUG_DEC, 3); - meiLongwordWrite(MEI_DEBUG_WAD, 0x3c); - meiLongwordWrite(MEI_DEBUG_DATA, 0x10); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_WAD, 0x2); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x3); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_RAD, 0x0); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); - auxreg0 = auxreg0 & 0x03ffffff; - meiLongwordWrite(MEI_DEBUG_WAD, 0x0); - meiLongwordWrite(MEI_DEBUG_DATA, auxreg0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x10a); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_DEC, 0x2); - meiLongwordWrite(MEI_DEBUG_WAD, 0xfffc); - meiLongwordWrite(MEI_DEBUG_DATA, 0x1fffffff); - meiPollForDbgDone(); - while(flshcnt<3){ - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_RAD, 0x0); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); - auxreg0 = auxreg0 & 0xff000000; - auxreg0 = auxreg0 | 0x3fff; - meiLongwordWrite(MEI_DEBUG_WAD, 0x0); - meiLongwordWrite(MEI_DEBUG_DATA, auxreg0); - meiPollForDbgDone(); - - meiLongwordWrite(MEI_DEBUG_DEC, 0x0); - meiLongwordWrite(MEI_DEBUG_RAD, 0x5); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg5); - auxreg5 = auxreg5 | 0x801; - meiLongwordWrite(MEI_DEBUG_WAD, 0x5); - meiLongwordWrite(MEI_DEBUG_DATA, auxreg5); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_RAD, 0x0); - meiPollForDbgDone(); - meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); - auxreg0 = auxreg0 & 0x00ffffff; - if(auxreg0 == 0x4000) - flshcnt = flshcnt+1; - else{ - if(flshcnt == 0) - flshcnt1 = flshcnt1 +1; - else - flshcnt2 = flshcnt2 +1; - } - } - - return 1; -} - -static int meiResetCore(void) -{ - meiLongwordWrite(MEI_CONTROL, 0x1); - meiLongwordWrite(MEI_DEBUG_DEC, 0x2); - meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10); - meiLongwordWrite(MEI_DEBUG_DATA, 0xf); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10); - meiLongwordWrite(MEI_DEBUG_DATA, 0x0); - meiPollForDbgDone(); - meiLongwordWrite(MEI_DEBUG_WAD, 0x31f00); - meiLongwordWrite(MEI_DEBUG_DATA, 0x55); - meiPollForDbgDone(); - return 1; -} - -static int meiEnalbeMailboxInt(void) -{ - u32 arc2meiintmsk; - meiLongwordRead(ARC_TO_MEI_INT_MASK, &arc2meiintmsk); - arc2meiintmsk = arc2meiintmsk | 0x1; - meiLongwordWrite(ARC_TO_MEI_INT_MASK, arc2meiintmsk); - meiLongwordWrite(MEI_CONTROL, 0x0); - return 1; -} - - - -//000002:fchang End - -static int mei_ioctl(struct inode * ino, struct file * fil, unsigned int command, unsigned long lon) -{ - int i,k; - u32 boot_loop; - u32 page_size; - u32 dest_addr; - u32 j; - u32 temp; - u32 temp2; - u16 trapsflag=0; - amazon_clreoc_pkt * current_clreoc; - struct timeval time_now; - struct timeval time_fini; - struct list_head * ptr; - amazon_mei_mib * mib_ptr; -// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4))); - structpts pts; - int meierr=MEI_SUCCESS; - u16 data[12]; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read. - meireg regrdwr; - meidebug debugrdwr; - amazon_mei_mib * temp_intvl; - struct sk_buff * eoc_skb; -// 603221:tc.chen start - u16 hdlc_cmd[2]; - u16 hdlc_rx_buffer[32]; - int hdlc_rx_len=0; -// 603221:tc.chen end - - int from_kernel = 0;//joelin - if (ino == (struct inode *)0) from_kernel = 1;//joelin - -// printk("\n switch.command = %i\n", command); - switch(command){ - case GET_ADSL_LINE_CODE: - pts.adslLineTableEntry_pt = (adslLineTableEntry *)kmalloc(sizeof(adslLineTableEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineTableEntry_pt, (char *)lon, sizeof(adslLineTableEntry)); - if(IS_FLAG_SET((&(pts.adslLineTableEntry_pt->flags)), LINE_CODE_FLAG)){ - pts.adslLineTableEntry_pt->adslLineCode = 2; - } - copy_to_user((char *)lon, (char *)pts.adslLineTableEntry_pt, sizeof(adslLineTableEntry)); - kfree(pts.adslLineTableEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUC_LINE_EXT: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry)); - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG)){ - ATUC_LINE_TRANS_CAP_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 67 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucCap)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){ - ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 67 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG)){ - ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 2 Address 1 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucActual)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG)){ // not supported currently -/* - LINE_GLITE_POWER_STATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 2 Address 0 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); - } - else{ - memcpy((&(pts.adslLineExtTableEntry_pt->adslLineGlitePowerState)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } -*/ - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); - } - copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry)); - kfree(pts.adslLineTableEntry_pt); - up(&mei_sema); - break; -#endif - -#ifdef AMAZON_MEI_MIB_RFC3440 - case SET_ADSL_ATUC_LINE_EXT: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry)); - - //only adslLineTransAtucConfig can be set. - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG); - if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){ - memcpy(data,(&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), 2); - ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 67 Index 0"); -#endif - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG); - } - } - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG); - CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); - - copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry)); - kfree(pts.adslLineTableEntry_pt); - up(&mei_sema); - break; -#endif - - case GET_ADSL_ATUC_PHY: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAtucPhysEntry_pt = (adslAtucPhysEntry *)kmalloc(sizeof(adslAtucPhysEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucPhysEntry_pt, (char *)lon, sizeof(adslAtucPhysEntry)); - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG)){ - ATUC_PHY_SER_NUM_FLAG_MAKECMV1; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 57 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG); - } - else{ - memcpy(pts.adslAtucPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - ATUC_PHY_SER_NUM_FLAG_MAKECMV2; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 57 Index 12"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG); - } - else{ - memcpy((pts.adslAtucPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG)){ - ATUC_PHY_VENDOR_ID_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 64 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG); - } - else{ - memcpy(pts.adslAtucPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG)){ - ATUC_PHY_VER_NUM_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 58 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG); - } - else{ - memcpy(pts.adslAtucPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_STAT_FLAG)){ - pts.adslAtucPhysEntry_pt->status = CurrStatus.adslAtucCurrStatus; - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG)){ - ATUC_CURR_OUT_PWR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 5"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG); - } - else{ - memcpy((&(pts.adslAtucPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG)){ - ATUC_CURR_ATTR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 69 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG); - } - else{ - memcpy((&(pts.adslAtucPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - copy_to_user((char *)lon, (char *)pts.adslAtucPhysEntry_pt, sizeof(adslAtucPhysEntry)); - kfree(pts.adslAtucPhysEntry_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUR_PHY: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAturPhysEntry_pt = (adslAturPhysEntry *)kmalloc(sizeof(adslAturPhysEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslAturPhysEntry_pt, (char *)lon, sizeof(adslAturPhysEntry)); - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG)){ - ATUR_PHY_SER_NUM_FLAG_MAKECMV1; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 62 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG); - } - else{ - memcpy(pts.adslAturPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - ATUR_PHY_SER_NUM_FLAG_MAKECMV2; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 62 Index 12"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG); - } - else{ - memcpy((pts.adslAturPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG)){ - ATUR_PHY_VENDOR_ID_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 65 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG); - } - else{ - memcpy(pts.adslAturPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG)){ - ATUR_PHY_VER_NUM_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 61 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG); - } - else{ - memcpy(pts.adslAturPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG)){ - ATUR_SNRMGN_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 4"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->SnrMgn)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG)){ - ATUR_ATTN_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 2"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->Attn)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_STAT_FLAG)){ - pts.adslAturPhysEntry_pt->status = CurrStatus.adslAturCurrStatus; - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG)){ - ATUR_CURR_OUT_PWR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 69 Index 5"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG)){ - ATUR_CURR_ATTR_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 68 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG); - } - else{ - memcpy((&(pts.adslAturPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - copy_to_user((char *)lon, (char *)pts.adslAturPhysEntry_pt, sizeof(adslAturPhysEntry)); - kfree(pts.adslAturPhysEntry_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUC_CHAN_INFO: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAtucChanInfo_pt = (adslAtucChanInfo *)kmalloc(sizeof(adslAtucChanInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucChanInfo_pt, (char *)lon, sizeof(adslAtucChanInfo)); - if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG)){ - if((chantype.interleave!=1) || (chantype.fast==1)){ - CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG); - } - else{ - ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 3 Index 1"); -#endif - CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG); - } - else{ - memcpy((&(pts.adslAtucChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - } - if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG)){ - ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 1 Index 0"); -#endif - CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG); - } - else{ - pts.adslAtucChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_PREV_TX_RATE_FLAG)){ - pts.adslAtucChanInfo_pt->prevTxRate = PrevTxRate.adslAtucChanPrevTxRate; - } - copy_to_user((char *)lon, (char *)pts.adslAtucChanInfo_pt, sizeof(adslAtucChanInfo)); - kfree(pts.adslAtucChanInfo_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUR_CHAN_INFO: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslAturChanInfo_pt = (adslAturChanInfo *)kmalloc(sizeof(adslAturChanInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturChanInfo_pt, (char *)lon, sizeof(adslAturChanInfo)); - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG)){ - if((chantype.interleave!=1) || (chantype.fast==1)){ - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG); - } - else{ - ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 2 Index 1"); -#endif - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG); - } - else{ - memcpy((&(pts.adslAturChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2)); - } - } - } - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG)){ - ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 0 Index 0"); -#endif - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG); - } - else{ - pts.adslAturChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_PREV_TX_RATE_FLAG)){ - pts.adslAturChanInfo_pt->prevTxRate = PrevTxRate.adslAturChanPrevTxRate; - } - if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG)){ - // ? no CMV to update this - CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG); - } - copy_to_user((char *)lon, (char *)pts.adslAturChanInfo_pt, sizeof(adslAturChanInfo)); - kfree(pts.adslAturChanInfo_pt); - - up(&mei_sema); - break; - case GET_ADSL_ATUC_PERF_DATA: - pts.atucPerfDataEntry_pt = (atucPerfDataEntry *)kmalloc(sizeof(atucPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.atucPerfDataEntry_pt, (char *)lon, sizeof(atucPerfDataEntry)); - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOFS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfLofs=ATUC_PERF_LOFS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOSS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfLoss=ATUC_PERF_LOSS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_ESS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfESs=ATUC_PERF_ESS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INITS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfInits=ATUC_PERF_INITS; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_VALID_INTVLS_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==96) - break; - } - pts.atucPerfDataEntry_pt->adslAtucPerfValidIntervals=i; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INVALID_INTVLS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfInvalidIntervals=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ - do_gettimeofday(&time_now); - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOFS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLofs=current_intvl->AtucPerfLof; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOSS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLoss=current_intvl->AtucPerfLos; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_ESS_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinESs=current_intvl->AtucPerfEs; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_INIT_FLAG)){ - pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinInits=current_intvl->AtucPerfInit; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i+=900; - } - do_gettimeofday(&time_now); - i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; - if(i>=86400) - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i-86400; - else - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLof; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfLof; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLofs=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLos; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfLos; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLoss=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfEs; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfEs; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayESs=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_INIT_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfInit; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfInit; - pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayInits=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_MON_SEC_FLAG)){ - i=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - i++; - } - if(i>=96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=86400; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLof; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfLos; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfEs; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_INITS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfInit; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=j; - else - pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=0; - } - - copy_to_user((char *)lon, (char *)pts.atucPerfDataEntry_pt, sizeof(atucPerfDataEntry)); - kfree(pts.atucPerfDataEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUC_PERF_DATA_EXT: //??? CMV mapping not available - pts.atucPerfDataExtEntry_pt = (atucPerfDataExtEntry *)kmalloc(sizeof(atucPerfDataExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.atucPerfDataExtEntry_pt, (char *)lon, sizeof(atucPerfDataExtEntry)); - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFastR=ATUC_PERF_STAT_FASTR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FAILED_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFailedFastR=ATUC_PERF_STAT_FAILED_FASTR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_SESL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatSesL=ATUC_PERF_STAT_SESL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_UASL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfStatUasL=ATUC_PERF_STAT_UASL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFastR=current_intvl->AtucPerfStatFastR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFailedFastR=current_intvl->AtucPerfStatFailedFastR; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_SESL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinSesL=current_intvl->AtucPerfStatSesL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_UASL_FLAG)){ - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinUasL=current_intvl->AtucPerfStatUasL; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFastR; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatFastR; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFastR=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFailedFastR; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatFailedFastR; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFailedFastR=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatSesL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatSesL; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DaySesL=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatUasL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AtucPerfStatUasL; - pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayUasL=j; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFastR; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatFailedFastR; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatSesL; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=0; - } - if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AtucPerfStatUasL; - i++; - if(i==96) - break; - } - if(i==96) - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=j; - else - pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=0; - } - copy_to_user((char *)lon, (char *)pts.atucPerfDataExtEntry_pt, sizeof(atucPerfDataExtEntry)); - kfree(pts.atucPerfDataExtEntry_pt); - break; -#endif - case GET_ADSL_ATUR_PERF_DATA: - pts.aturPerfDataEntry_pt = (aturPerfDataEntry *)kmalloc(sizeof(aturPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.aturPerfDataEntry_pt, (char *)lon, sizeof(aturPerfDataEntry)); - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOFS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfLofs=ATUR_PERF_LOFS; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOSS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfLoss=ATUR_PERF_LOSS; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LPR_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfLprs=ATUR_PERF_LPR; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_ESS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfESs=ATUR_PERF_ESS; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_VALID_INTVLS_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==96) - break; - } - pts.aturPerfDataEntry_pt->adslAturPerfValidIntervals=i; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_INVALID_INTVLS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfInvalidIntervals=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ - do_gettimeofday(&time_now); - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOFS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLofs=current_intvl->AturPerfLof; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOSS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLoss=current_intvl->AturPerfLos; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LPR_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLprs=current_intvl->AturPerfLpr; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_ESS_FLAG)){ - pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinESs=current_intvl->AturPerfEs; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i+=900; - } - do_gettimeofday(&time_now); - i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; - if(i>=86400) - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i-86400; - else - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLof; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfLof; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLofs=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLos; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfLos; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLoss=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LPR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLpr; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfLpr; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLprs=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfEs; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfEs; - pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayESs=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_MON_SEC_FLAG)){ - i=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - i++; - } - if(i>=96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=86400; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOFS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLof; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOSS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLos; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LPR_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfLpr; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_ESS_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfEs; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=j; - else - pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=0; - } - - copy_to_user((char *)lon, (char *)pts.aturPerfDataEntry_pt, sizeof(aturPerfDataEntry)); - kfree(pts.aturPerfDataEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUR_PERF_DATA_EXT: - pts.aturPerfDataExtEntry_pt = (aturPerfDataExtEntry *)kmalloc(sizeof(aturPerfDataExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.aturPerfDataExtEntry_pt, (char *)lon, sizeof(aturPerfDataExtEntry)); - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_SESL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfStatSesL=ATUR_PERF_STAT_SESL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_UASL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfStatUasL=ATUR_PERF_STAT_UASL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_SESL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinSesL=current_intvl->AturPerfStatSesL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_UASL_FLAG)){ - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinUasL=current_intvl->AturPerfStatUasL; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatSesL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfStatSesL; - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DaySesL=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatUasL; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturPerfStatUasL; - pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DayUasL=j; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_SESL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatSesL; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=j; - else - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=0; - } - if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_UASL_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturPerfStatUasL; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=j; - else - pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=0; - } - copy_to_user((char *)lon, (char *)pts.aturPerfDataExtEntry_pt, sizeof(aturPerfDataExtEntry)); - kfree(pts.aturPerfDataExtEntry_pt); - break; -#endif - case GET_ADSL_ATUC_INTVL_INFO: - pts.adslAtucIntvlInfo_pt = (adslAtucIntvlInfo *)kmalloc(sizeof(adslAtucIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucIntvlInfo_pt, (char *)lon, sizeof(adslAtucIntvlInfo)); - - if(pts.adslAtucIntvlInfo_pt->IntervalNumber <1){ - pts.adslAtucIntvlInfo_pt->intervalLOF = ATUC_PERF_LOFS; - pts.adslAtucIntvlInfo_pt->intervalLOS = ATUC_PERF_LOSS; - pts.adslAtucIntvlInfo_pt->intervalES = ATUC_PERF_ESS; - pts.adslAtucIntvlInfo_pt->intervalInits = ATUC_PERF_INITS; - pts.adslAtucIntvlInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAtucIntvlInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAtucIntvlInfo_pt->intervalLOF = temp_intvl->AtucPerfLof; - pts.adslAtucIntvlInfo_pt->intervalLOS = temp_intvl->AtucPerfLos; - pts.adslAtucIntvlInfo_pt->intervalES = temp_intvl->AtucPerfEs; - pts.adslAtucIntvlInfo_pt->intervalInits = temp_intvl->AtucPerfInit; - pts.adslAtucIntvlInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ - pts.adslAtucIntvlInfo_pt->intervalValidData = 0; - pts.adslAtucIntvlInfo_pt->flags = 0; - pts.adslAtucIntvlInfo_pt->intervalLOF = 0; - pts.adslAtucIntvlInfo_pt->intervalLOS = 0; - pts.adslAtucIntvlInfo_pt->intervalES = 0; - pts.adslAtucIntvlInfo_pt->intervalInits = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAtucIntvlInfo_pt, sizeof(adslAtucIntvlInfo)); - kfree(pts.adslAtucIntvlInfo_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUC_INTVL_EXT_INFO: - pts.adslAtucInvtlExtInfo_pt = (adslAtucInvtlExtInfo *)kmalloc(sizeof(adslAtucInvtlExtInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucInvtlExtInfo_pt, (char *)lon, sizeof(adslAtucInvtlExtInfo)); - if(pts.adslAtucInvtlExtInfo_pt->IntervalNumber <1){ - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = ATUC_PERF_STAT_FASTR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = ATUC_PERF_STAT_FAILED_FASTR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = ATUC_PERF_STAT_SESL; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = ATUC_PERF_STAT_UASL; -// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAtucInvtlExtInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = temp_intvl->AtucPerfStatFastR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = temp_intvl->AtucPerfStatFailedFastR; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = temp_intvl->AtucPerfStatSesL; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = temp_intvl->AtucPerfStatUasL; -// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ -// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 0; - pts.adslAtucInvtlExtInfo_pt->flags = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = 0; - pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = 0; - } - } - copy_to_user((char *)lon, (char *)pts.adslAtucInvtlExtInfo_pt, sizeof(adslAtucInvtlExtInfo)); - kfree(pts.adslAtucInvtlExtInfo_pt); - break; -#endif - case GET_ADSL_ATUR_INTVL_INFO: - pts.adslAturIntvlInfo_pt = (adslAturIntvlInfo *)kmalloc(sizeof(adslAturIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturIntvlInfo_pt, (char *)lon, sizeof(adslAturIntvlInfo)); - - if(pts.adslAturIntvlInfo_pt->IntervalNumber <1){ - pts.adslAturIntvlInfo_pt->intervalLOF = ATUR_PERF_LOFS; - pts.adslAturIntvlInfo_pt->intervalLOS = ATUR_PERF_LOSS; - pts.adslAturIntvlInfo_pt->intervalES = ATUR_PERF_ESS; - pts.adslAturIntvlInfo_pt->intervalLPR = ATUR_PERF_LPR; - pts.adslAturIntvlInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAturIntvlInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAturIntvlInfo_pt->intervalLOF = temp_intvl->AturPerfLof; - pts.adslAturIntvlInfo_pt->intervalLOS = temp_intvl->AturPerfLos; - pts.adslAturIntvlInfo_pt->intervalES = temp_intvl->AturPerfEs; - pts.adslAturIntvlInfo_pt->intervalLPR = temp_intvl->AturPerfLpr; - pts.adslAturIntvlInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ - pts.adslAturIntvlInfo_pt->intervalValidData = 0; - pts.adslAturIntvlInfo_pt->flags = 0; - pts.adslAturIntvlInfo_pt->intervalLOF = 0; - pts.adslAturIntvlInfo_pt->intervalLOS = 0; - pts.adslAturIntvlInfo_pt->intervalES = 0; - pts.adslAturIntvlInfo_pt->intervalLPR = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAturIntvlInfo_pt, sizeof(adslAturIntvlInfo)); - kfree(pts.adslAturIntvlInfo_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ATUR_INTVL_EXT_INFO: - pts.adslAturInvtlExtInfo_pt = (adslAturInvtlExtInfo *)kmalloc(sizeof(adslAturInvtlExtInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturInvtlExtInfo_pt, (char *)lon, sizeof(adslAturInvtlExtInfo)); - - if(pts.adslAturInvtlExtInfo_pt->IntervalNumber <1){ - pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = ATUR_PERF_STAT_SESL; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = ATUR_PERF_STAT_UASL; -// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAturInvtlExtInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = temp_intvl->AturPerfStatSesL; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = temp_intvl->AturPerfStatUasL; -// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ -// pts.adslAturInvtlExtInfo_pt->intervalValidData = 0; - pts.adslAturInvtlExtInfo_pt->flags = 0; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = 0; - pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAturInvtlExtInfo_pt, sizeof(adslAturInvtlExtInfo)); - kfree(pts.adslAturInvtlExtInfo_pt); - break; -#endif - case GET_ADSL_ATUC_CHAN_PERF_DATA: - pts.atucChannelPerfDataEntry_pt = (atucChannelPerfDataEntry *)kmalloc(sizeof(atucChannelPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.atucChannelPerfDataEntry_pt, (char *)lon, sizeof(atucChannelPerfDataEntry)); - - pts.atucChannelPerfDataEntry_pt->flags = 0; - - copy_to_user((char *)lon, (char *)pts.atucChannelPerfDataEntry_pt, sizeof(atucChannelPerfDataEntry)); - kfree(pts.atucChannelPerfDataEntry_pt); - break; - case GET_ADSL_ATUR_CHAN_PERF_DATA: - pts.aturChannelPerfDataEntry_pt = (aturChannelPerfDataEntry *)kmalloc(sizeof(aturChannelPerfDataEntry), GFP_KERNEL); - copy_from_user((char *)pts.aturChannelPerfDataEntry_pt, (char *)lon, sizeof(aturChannelPerfDataEntry)); - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_RECV_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanReceivedBlks=ATUR_CHAN_RECV_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_TX_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanTransmittedBlks=ATUR_CHAN_TX_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_CORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanCorrectedBlks=ATUR_CHAN_CORR_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_UNCORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanUncorrectBlks=ATUR_CHAN_UNCORR_BLK; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_VALID_INTVL_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==96) - break; - } - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfValidIntervals=i; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_INVALID_INTVL_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfInvalidIntervals=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ - do_gettimeofday(&time_now); - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinReceivedBlks=current_intvl->AturChanPerfRxBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTransmittedBlks=current_intvl->AturChanPerfTxBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinCorrectedBlks=current_intvl->AturChanPerfCorrBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG)){ - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinUncorrectBlks=current_intvl->AturChanPerfUncorrBlk; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i+=900; - } - do_gettimeofday(&time_now); - i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; - if(i>=86400) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i-86400; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfRxBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfRxBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayReceivedBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfTxBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfTxBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTransmittedBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfCorrBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfCorrBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayCorrectedBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfUncorrBlk; - i++; - if(i==96) - j=0; - } - j+=current_intvl->AturChanPerfUncorrBlk; - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayUncorrectBlks=j; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG)){ - i=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - i++; - } - if(i>=96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=86400; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfRxBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfTxBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfCorrBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=0; - } - if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG)){ - i=0; - j=0; - for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ - mib_ptr = list_entry(ptr, amazon_mei_mib, list); - j+=mib_ptr->AturChanPerfUncorrBlk; - i++; - if(i==96) - break; - } - if(i==96) - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=j; - else - pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=0; - } - - copy_to_user((char *)lon, (char *)pts.aturChannelPerfDataEntry_pt, sizeof(aturChannelPerfDataEntry)); - kfree(pts.aturChannelPerfDataEntry_pt); - break; - case GET_ADSL_ATUC_CHAN_INTVL_INFO: - pts.adslAtucChanIntvlInfo_pt = (adslAtucChanIntvlInfo *)kmalloc(sizeof(adslAtucChanIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAtucChanIntvlInfo_pt, (char *)lon, sizeof(adslAtucChanIntvlInfo)); - - pts.adslAtucChanIntvlInfo_pt->flags = 0; - - copy_to_user((char *)lon, (char *)pts.adslAtucChanIntvlInfo_pt, sizeof(adslAtucChanIntvlInfo)); - kfree(pts.adslAtucChanIntvlInfo_pt); - break; - case GET_ADSL_ATUR_CHAN_INTVL_INFO: - pts.adslAturChanIntvlInfo_pt = (adslAturChanIntvlInfo *)kmalloc(sizeof(adslAturChanIntvlInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslAturChanIntvlInfo_pt, (char *)lon, sizeof(adslAturChanIntvlInfo)); - - if(pts.adslAturChanIntvlInfo_pt->IntervalNumber <1){ - pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = ATUR_CHAN_RECV_BLK; - pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = ATUR_CHAN_TX_BLK; - pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = ATUR_CHAN_CORR_BLK; - pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = ATUR_CHAN_UNCORR_BLK; - pts.adslAturChanIntvlInfo_pt->intervalValidData = 1; - } - else{ - i=0; - for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ - i++; - if(i==pts.adslAturChanIntvlInfo_pt->IntervalNumber){ - temp_intvl = list_entry(ptr, amazon_mei_mib, list); - pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = temp_intvl->AturChanPerfRxBlk; - pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = temp_intvl->AturChanPerfTxBlk; - pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = temp_intvl->AturChanPerfCorrBlk; - pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = temp_intvl->AturChanPerfUncorrBlk; - pts.adslAturChanIntvlInfo_pt->intervalValidData = 1; - break; - } - } - if(ptr==&interval_list){ - pts.adslAturChanIntvlInfo_pt->intervalValidData = 0; - pts.adslAturChanIntvlInfo_pt->flags = 0; - } - } - - copy_to_user((char *)lon, (char *)pts.adslAturChanIntvlInfo_pt, sizeof(adslAturChanIntvlInfo)); - kfree(pts.adslAturChanIntvlInfo_pt); - break; - case GET_ADSL_ALRM_CONF_PROF: - pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry)); - - strncpy(pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, AlarmConfProfile.adslLineAlarmConfProfileName, 32); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs=AlarmConfProfile.adslAtucThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss=AlarmConfProfile.adslAtucThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs=AlarmConfProfile.adslAtucThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp=AlarmConfProfile.adslAtucThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp=AlarmConfProfile.adslAtucThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown=AlarmConfProfile.adslAtucThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown=AlarmConfProfile.adslAtucThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable=AlarmConfProfile.adslAtucInitFailureTrapEnable; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs=AlarmConfProfile.adslAturThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss=AlarmConfProfile.adslAturThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs=AlarmConfProfile.adslAturThresh15MinLprs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs=AlarmConfProfile.adslAturThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp=AlarmConfProfile.adslAturThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp=AlarmConfProfile.adslAturThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown=AlarmConfProfile.adslAturThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown=AlarmConfProfile.adslAturThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){ - pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus=AlarmConfProfile.adslLineAlarmConfProfileRowStatus; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry)); - kfree(pts.adslLineAlarmConfProfileEntry_pt); - break; -#ifdef AMAZON_MEI_MIB_RFC3440 - case GET_ADSL_ALRM_CONF_PROF_EXT: - pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry)); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL=AlarmConfProfileExt.adslAtucThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL=AlarmConfProfileExt.adslAtucThreshold15MinUasL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL=AlarmConfProfileExt.adslAturThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){ - pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL=AlarmConfProfileExt.adslAturThreshold15MinUasL; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry)); - kfree(pts.adslLineAlarmConfProfileExtEntry_pt); - break; -#endif - case SET_ADSL_ALRM_CONF_PROF: - pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry)); - - strncpy(AlarmConfProfile.adslLineAlarmConfProfileName, pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, 32); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){ - AlarmConfProfile.adslAtucThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){ - AlarmConfProfile.adslAtucThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){ - AlarmConfProfile.adslAtucThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){ - AlarmConfProfile.adslAtucThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){ - AlarmConfProfile.adslAtucThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAtucThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAtucThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){ - AlarmConfProfile.adslAtucInitFailureTrapEnable=pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinLprs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){ - AlarmConfProfile.adslAturThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){ - AlarmConfProfile.adslAturThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){ - AlarmConfProfile.adslAturThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAturThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ - AlarmConfProfile.adslAturThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){ - AlarmConfProfile.adslLineAlarmConfProfileRowStatus=pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry)); - kfree(pts.adslLineAlarmConfProfileEntry_pt); - break; - -#ifdef AMAZON_MEI_MIB_RFC3440 - case SET_ADSL_ALRM_CONF_PROF_EXT: - pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL); - copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry)); - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){ - AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){ - AlarmConfProfileExt.adslAtucThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){ - AlarmConfProfileExt.adslAtucThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){ - AlarmConfProfileExt.adslAturThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL; - } - if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){ - AlarmConfProfileExt.adslAturThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL; - } - copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry)); - kfree(pts.adslLineAlarmConfProfileExtEntry_pt); - break; -#endif - - case ADSL_ATUR_TRAPS: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - trapsflag=0; - if(AlarmConfProfile.adslAtucThresh15MinLofs!=0 && current_intvl->AtucPerfLof>=AlarmConfProfile.adslAtucThresh15MinLofs) - trapsflag|=ATUC_PERF_LOFS_THRESH_FLAG; - if(AlarmConfProfile.adslAtucThresh15MinLoss!=0 && current_intvl->AtucPerfLos>=AlarmConfProfile.adslAtucThresh15MinLoss) - trapsflag|=ATUC_PERF_LOSS_THRESH_FLAG; - if(AlarmConfProfile.adslAtucThresh15MinESs!=0 && current_intvl->AtucPerfEs>=AlarmConfProfile.adslAtucThresh15MinESs) - trapsflag|=ATUC_PERF_ESS_THRESH_FLAG; - if(chantype.fast==1){ - if(AlarmConfProfile.adslAtucThreshFastRateUp!=0 || AlarmConfProfile.adslAtucThreshFastRateDown!=0){ - ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 1 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAtucThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshFastRateUp)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAtucThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshFastRateDown)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - } - } - } - if(chantype.interleave==1){ - if(AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0){ - ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 1 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshInterleaveRateUp)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshInterleaveRateDown)){ - trapsflag|=ATUC_RATE_CHANGE_FLAG; - PrevTxRate.adslAtucChanPrevTxRate = temp; - } - } - } - } - if(AlarmConfProfile.adslAturThresh15MinLofs!=0 && current_intvl->AturPerfLof>=AlarmConfProfile.adslAturThresh15MinLofs) - trapsflag|=ATUR_PERF_LOFS_THRESH_FLAG; - if(AlarmConfProfile.adslAturThresh15MinLoss!=0 && current_intvl->AturPerfLos>=AlarmConfProfile.adslAturThresh15MinLoss) - trapsflag|=ATUR_PERF_LOSS_THRESH_FLAG; - if(AlarmConfProfile.adslAturThresh15MinLprs!=0 && current_intvl->AturPerfLpr>=AlarmConfProfile.adslAturThresh15MinLprs) - trapsflag|=ATUR_PERF_LPRS_THRESH_FLAG; - if(AlarmConfProfile.adslAturThresh15MinESs!=0 && current_intvl->AturPerfEs>=AlarmConfProfile.adslAturThresh15MinESs) - trapsflag|=ATUR_PERF_ESS_THRESH_FLAG; - if(chantype.fast==1){ - if(AlarmConfProfile.adslAturThreshFastRateUp!=0 || AlarmConfProfile.adslAturThreshFastRateDown!=0){ - ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 0 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAturThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshFastRateUp)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAturThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshFastRateDown)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - } - } - } - if(chantype.interleave==1){ - if(AlarmConfProfile.adslAturThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAturThreshInterleaveRateDown!=0){ - ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 6 Address 0 Index 0"); -#endif - } - else{ - temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - if((AlarmConfProfile.adslAturThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshInterleaveRateUp)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - if((AlarmConfProfile.adslAturThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshInterleaveRateDown)){ - trapsflag|=ATUR_RATE_CHANGE_FLAG; - PrevTxRate.adslAturChanPrevTxRate = temp; - } - } - } - } - copy_to_user((char *)lon, (char *)(&trapsflag), 2); - - up(&mei_sema); - break; - -#ifdef AMAZON_MEI_MIB_RFC3440 - case ADSL_ATUR_EXT_TRAPS: - trapsflag=0; - if(AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR!=0 && current_intvl->AtucPerfStatFailedFastR>=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR) - trapsflag|=ATUC_15MIN_FAILED_FASTR_TRAP_FLAG; - if(AlarmConfProfileExt.adslAtucThreshold15MinSesL!=0 && current_intvl->AtucPerfStatSesL>=AlarmConfProfileExt.adslAtucThreshold15MinSesL) - trapsflag|=ATUC_15MIN_SESL_TRAP_FLAG; - if(AlarmConfProfileExt.adslAtucThreshold15MinUasL!=0 && current_intvl->AtucPerfStatUasL>=AlarmConfProfileExt.adslAtucThreshold15MinUasL) - trapsflag|=ATUC_15MIN_UASL_TRAP_FLAG; - if(AlarmConfProfileExt.adslAturThreshold15MinSesL!=0 && current_intvl->AturPerfStatSesL>=AlarmConfProfileExt.adslAturThreshold15MinSesL) - trapsflag|=ATUR_15MIN_SESL_TRAP_FLAG; - if(AlarmConfProfileExt.adslAturThreshold15MinUasL!=0 && current_intvl->AturPerfStatUasL>=AlarmConfProfileExt.adslAturThreshold15MinUasL) - trapsflag|=ATUR_15MIN_UASL_TRAP_FLAG; - copy_to_user((char *)lon, (char *)(&trapsflag), 2); - break; -#endif - -// 603221:tc.chen start - case GET_ADSL_LINE_STATUS: - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslLineStatusInfo_pt = (adslLineStatusInfo *)kmalloc(sizeof(adslLineStatusInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslLineStatusInfo_pt, (char *)lon, sizeof(adslLineStatusInfo)); - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODEM_STATUS_FLAG)){ - LINE_STAT_MODEM_STATUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 0 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslModemStatus = 0; - } - else{ - pts.adslLineStatusInfo_pt->adslModemStatus = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODE_SEL_FLAG)){ - LINE_STAT_MODE_SEL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslModeSelected = 0; - } - else{ - pts.adslLineStatusInfo_pt->adslModeSelected = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_TRELLCOD_ENABLE_FLAG)){ - LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group OPTN Address 2 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = 0; - } - else{ - - pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = (RxMessage[4]>>13)&0x1==0x1?0:1; - } - } - - if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_LATENCY_FLAG)){ - LINE_STAT_LATENCY_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 12 Index 0"); -#endif - pts.adslLineStatusInfo_pt->adslLatency = 0; - } - else{ - pts.adslLineStatusInfo_pt->adslLatency = RxMessage[4]; - } - } - - copy_to_user((char *)lon, (char *)pts.adslLineStatusInfo_pt, sizeof(adslLineStatusInfo)); - kfree(pts.adslLineStatusInfo_pt); - - up(&mei_sema); - break; - - - case GET_ADSL_LINE_RATE: - if (showtime!=1) - return -ERESTARTSYS; - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslLineRateInfo_pt = (adslLineRateInfo *)kmalloc(sizeof(adslLineRateInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslLineRateInfo_pt, (char *)lon, sizeof(adslLineRateInfo)); - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEDS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - if (chantype.interleave) - LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV; - else - LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group RATE Address 1 Index 0"); -#endif - pts.adslLineRateInfo_pt->adslDataRateds = 0; - } - else{ - pts.adslLineRateInfo_pt->adslDataRateds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - }else // adsl 2/2+ - { - unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain; - Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0; - //// up stream data rate - - if (chantype.interleave) - { - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 25 Index 0"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 23 Index 0"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 24 Index 0"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 26 Index 0"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 28 Index 0"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - }else - { - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 25 Index 1"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 23 Index 1"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 24 Index 1"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 26 Index 1"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 28 Index 2"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - } - DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp)); - //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp)); - //pts.adslLineRateInfo_pt->adslDataRateds = DataRate * 1000 + DataRate_remain; - pts.adslLineRateInfo_pt->adslDataRateds = DataRate; - } - } - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - if (chantype.interleave) - LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV; - else - LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - #ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group RATE Address 0 Index 0"); - #endif - pts.adslLineRateInfo_pt->adslDataRateus = 0; - } - else{ - pts.adslLineRateInfo_pt->adslDataRateus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - }else // adsl 2/2+ - { - unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain; - Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0; - //// down stream data rate - - if (chantype.interleave) - { - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 14 Index 0"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 12 Index 0"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 13 Index 0"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 15 Index 0"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 17 Index 0"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - }else - { - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 14 Index 1"); -#endif - Lp = 0; - }else - Lp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 12 Index 1"); -#endif - Rp = 0; - }else - Rp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 13 Index 1"); -#endif - Mp = 0; - }else - Mp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 15 Index 1"); -#endif - Tp = 0; - }else - Tp=RxMessage[4]; - - LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 17 Index 2"); -#endif - Kp = 0; - }else - { - Kp=RxMessage[4]+ RxMessage[5]+1; - Bpn=RxMessage[4]+ RxMessage[5]; - } - } - DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp)); - //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp)); - //pts.adslLineRateInfo_pt->adslDataRateus = DataRate * 1000 + DataRate_remain; - pts.adslLineRateInfo_pt->adslDataRateus = DataRate; - } - } - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRDS_FLAG)){ - LINE_RATE_ATTNDRDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 4"); -#endif - pts.adslLineRateInfo_pt->adslATTNDRds = 0; - } - else{ - pts.adslLineRateInfo_pt->adslATTNDRds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_RATE_ATTNDRUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - #ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 4"); - #endif - pts.adslLineRateInfo_pt->adslATTNDRus = 0; - } - else{ - pts.adslLineRateInfo_pt->adslATTNDRus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x24; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_RATE_END; - } - pts.adslLineRateInfo_pt->adslATTNDRus = (u32)le16_to_cpu(hdlc_rx_buffer[1])<<16 | (u32)le16_to_cpu(hdlc_rx_buffer[2]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_RATE_END; - } - } - } - copy_to_user((char *)lon, (char *)pts.adslLineRateInfo_pt, sizeof(adslLineRateInfo)); - up(&mei_sema); - -GET_ADSL_LINE_RATE_END: - kfree(pts.adslLineRateInfo_pt); - break; - - case GET_ADSL_LINE_INFO: - if (showtime!=1) - return -ERESTARTSYS; - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslLineInfo_pt = (adslLineInfo *)kmalloc(sizeof(adslLineInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslLineInfo_pt, (char *)lon, sizeof(adslLineInfo)); - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHDS_FLAG)){ - if (chantype.interleave) - LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV; - else - LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 27 Index 0"); -#endif - pts.adslLineInfo_pt->adslInterleaveDepthds = 0; - } - else{ - pts.adslLineInfo_pt->adslInterleaveDepthds = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHUS_FLAG)){ - if (chantype.interleave) - LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV; - else - LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group CNFG Address 16 Index 0"); -#endif - pts.adslLineInfo_pt->adslInterleaveDepthus = 0; - } - else{ - pts.adslLineInfo_pt->adslInterleaveDepthus = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNDS_FLAG)){ - LINE_INFO_LATNDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 1"); -#endif - pts.adslLineInfo_pt->adslLATNds = 0; - } - else{ - pts.adslLineInfo_pt->adslLATNds = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_INFO_LATNUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 1"); -#endif - pts.adslLineInfo_pt->adslLATNus = 0; - } - else{ - pts.adslLineInfo_pt->adslLATNus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x21; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslLATNus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNDS_FLAG)){ - LINE_INFO_SATNDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 2"); -#endif - pts.adslLineInfo_pt->adslSATNds = 0; - } - else{ - pts.adslLineInfo_pt->adslSATNds = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_INFO_SATNUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 2"); -#endif - pts.adslLineInfo_pt->adslSATNus = 0; - } - else{ - pts.adslLineInfo_pt->adslSATNus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x22; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslSATNus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNDS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode - { - LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV; - } - else if ((adsl_mode == 0x4000) || (adsl_mode == 0x8000) || adsl_mode_extend > 0) - { - LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV; - } - else - { - LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 3"); -#endif - pts.adslLineInfo_pt->adslSNRMds = 0; - } - else{ - if (adsl_mode>8 || adsl_mode_extend>0) - { - int SNRMds,SNRMds_remain; - SNRMds=RxMessage[4]; - SNRMds_remain=((SNRMds&0xff)*1000)/256; - SNRMds=(SNRMds>>8)&0xff; - if ((SNRMds_remain%100)>=50) SNRMds_remain=(SNRMds_remain/100)+1; - else SNRMds_remain=(SNRMds_remain/100); - pts.adslLineInfo_pt->adslSNRMds = SNRMds*10 + SNRMds_remain; - }else - { - pts.adslLineInfo_pt->adslSNRMds = RxMessage[4]; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend == 0) - { - LINE_INFO_SNRMNUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 3"); -#endif - pts.adslLineInfo_pt->adslSNRMus = 0; - } - else{ - pts.adslLineInfo_pt->adslSNRMus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x23; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslSNRMus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPDS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend == 0) - { - LINE_INFO_ACATPDS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - #ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 68 Index 6"); - #endif - pts.adslLineInfo_pt->adslACATPds = 0; - } - else{ - pts.adslLineInfo_pt->adslACATPds = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x25; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslACATPds = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPUS_FLAG)){ - if (adsl_mode <=8 && adsl_mode_extend == 0) - { - LINE_INFO_ACATPUS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 69 Index 6"); -#endif - pts.adslLineInfo_pt->adslACATPus = 0; - } - else{ - pts.adslLineInfo_pt->adslACATPus = RxMessage[4]; - } - }else - { - hdlc_cmd[0]=0x0181; - hdlc_cmd[1]=0x26; - up(&mei_sema); - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - pts.adslLineInfo_pt->adslACATPus = le16_to_cpu(hdlc_rx_buffer[1]); - } - if(down_interruptible(&mei_sema)) - { - meierr = -ERESTARTSYS; - goto GET_ADSL_LINE_INFO_END; - } - } - } - - copy_to_user((char *)lon, (char *)pts.adslLineInfo_pt, sizeof(adslLineInfo)); - up(&mei_sema); - -GET_ADSL_LINE_INFO_END: - kfree(pts.adslLineInfo_pt); - break; - - case GET_ADSL_NEAREND_STATS: - if (showtime!=1) - return -ERESTARTSYS; - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslNearEndPerfStats_pt = (adslNearEndPerfStats *)kmalloc(sizeof(adslNearEndPerfStats), GFP_KERNEL); - copy_from_user((char *)pts.adslNearEndPerfStats_pt, (char *)lon, sizeof(adslNearEndPerfStats)); - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SUPERFRAME_FLAG)){ - NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 20 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslSuperFrames = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslSuperFrames = (u32)(RxMessage[4]); - } - NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 21 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslSuperFrames = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslSuperFrames += (((u32)(RxMessage[4]))<<16); - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG) || - IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG) ){ - NEAREND_PERF_LOS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 0 Index 0"); -#endif - RxMessage[4] = 0; - } - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG)){ - if( (RxMessage[4]&0x1) == 0x1) - pts.adslNearEndPerfStats_pt->adslneLOS = 1; - else - pts.adslNearEndPerfStats_pt->adslneLOS = 0; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG)){ - if( (RxMessage[4]&0x2) == 0x2) - pts.adslNearEndPerfStats_pt->adslneLOF = 1; - else - pts.adslNearEndPerfStats_pt->adslneLOF = 0; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG)){ - if( (RxMessage[4]&0x4) == 0x4) - pts.adslNearEndPerfStats_pt->adslneLPR = 1; - else - pts.adslNearEndPerfStats_pt->adslneLPR = 0; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG)){ - pts.adslNearEndPerfStats_pt->adslneNCD = (RxMessage[4]>>4)&0x3; - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG)){ - pts.adslNearEndPerfStats_pt->adslneLCD = (RxMessage[4]>>6)&0x3; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_CRC_FLAG)){ - if (chantype.interleave) - NEAREND_PERF_CRC_FLAG_LP0_MAKECMV; - else - NEAREND_PERF_CRC_FLAG_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 2 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneCRC = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneCRC = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_RSCORR_FLAG)){ - if (chantype.interleave) - NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV; - else - NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV; - - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 3 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneRSCorr = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneRSCorr = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_FECS_FLAG)){ - NEAREND_PERF_FECS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 6 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneFECS = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneFECS = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_ES_FLAG)){ - NEAREND_PERF_ES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 7 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneES = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneES = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SES_FLAG)){ - NEAREND_PERF_SES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 8 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneSES = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneSES = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOSS_FLAG)){ - NEAREND_PERF_LOSS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 9 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneLOSS = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneLOSS = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_UAS_FLAG)){ - NEAREND_PERF_UAS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 10 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneUAS = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneUAS = RxMessage[4]; - } - } - - if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_HECERR_FLAG)){ - if (chantype.bearchannel0) - { - NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV; - }else if (chantype.bearchannel1) - { - NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 11 Index 0"); -#endif - pts.adslNearEndPerfStats_pt->adslneHECErrors = 0; - } - else{ - pts.adslNearEndPerfStats_pt->adslneHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - copy_to_user((char *)lon, (char *)pts.adslNearEndPerfStats_pt, sizeof(adslNearEndPerfStats)); - kfree(pts.adslNearEndPerfStats_pt); - - up(&mei_sema); - break; - - case GET_ADSL_FAREND_STATS: - - if (showtime!=1) - return -ERESTARTSYS; - - if (adsl_mode>8 || adsl_mode_extend > 0) - { - do_gettimeofday(&time_now); - if( FarendData_acquire_time.tv_sec==0 || time_now.tv_sec - FarendData_acquire_time.tv_sec>=1) - { - hdlc_cmd[0]=0x105; - - if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],2)!= -EBUSY) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1); - hdlc_rx_len=0; - hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); - if (hdlc_rx_len <=0) - { - return -ERESTARTSYS; - } - FarendStatsData.adslfeRSCorr = ((u32)le16_to_cpu(hdlc_rx_buffer[1]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[2]); - FarendStatsData.adslfeCRC = ((u32)le16_to_cpu(hdlc_rx_buffer[3]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[4]); - FarendStatsData.adslfeFECS = ((u32)le16_to_cpu(hdlc_rx_buffer[5]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[6]); - FarendStatsData.adslfeES = ((u32)le16_to_cpu(hdlc_rx_buffer[7]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[8]); - FarendStatsData.adslfeSES = ((u32)le16_to_cpu(hdlc_rx_buffer[9]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[10]); - FarendStatsData.adslfeLOSS = ((u32)le16_to_cpu(hdlc_rx_buffer[11]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[12]); - FarendStatsData.adslfeUAS = ((u32)le16_to_cpu(hdlc_rx_buffer[13]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[14]); - do_gettimeofday(&FarendData_acquire_time); - } - - } - } - - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - pts.adslFarEndPerfStats_pt = (adslFarEndPerfStats *)kmalloc(sizeof(adslFarEndPerfStats), GFP_KERNEL); - copy_from_user((char *)pts.adslFarEndPerfStats_pt, (char *)lon, sizeof(adslFarEndPerfStats)); - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG) || - IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG) ){ - FAREND_PERF_LOS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 1 Index 0"); -#endif - RxMessage[4] = 0; - } - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG)){ - if((RxMessage[4]&0x1) == 0x1) - pts.adslFarEndPerfStats_pt->adslfeLOS = 1; - else - pts.adslFarEndPerfStats_pt->adslfeLOS = 0; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG)){ - if((RxMessage[4]&0x2) == 0x2) - pts.adslFarEndPerfStats_pt->adslfeLOF = 1; - else - pts.adslFarEndPerfStats_pt->adslfeLOF = 0; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG)){ - if((RxMessage[4]&0x4) == 0x4) - pts.adslFarEndPerfStats_pt->adslfeLPR = 1; - else - pts.adslFarEndPerfStats_pt->adslfeLPR = 0; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG)){ - pts.adslFarEndPerfStats_pt->adslfeNCD = (RxMessage[4]>>4)&0x3; - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG)){ - pts.adslFarEndPerfStats_pt->adslfeLCD = (RxMessage[4]>>6)&0x3; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_CRC_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - if (chantype.interleave) - { - FAREND_PERF_CRC_FLAG_LP0_MAKECMV; - } - else - { - FAREND_PERF_CRC_FLAG_LP1_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 24 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeCRC = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeCRC = RxMessage[4]; - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeCRC = FarendStatsData.adslfeCRC; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_RSCORR_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - if (chantype.interleave) - FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV; - else - FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 28 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeRSCorr = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeRSCorr = RxMessage[4]; - - } - } - else - { - pts.adslFarEndPerfStats_pt->adslfeRSCorr = FarendStatsData.adslfeRSCorr; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_FECS_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_FECS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 32 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeFECS = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeFECS = RxMessage[4]; - } - }else { - pts.adslFarEndPerfStats_pt->adslfeFECS = FarendStatsData.adslfeFECS; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_ES_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_ES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 33 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeES = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeES = RxMessage[4]; - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeES = FarendStatsData.adslfeES; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_SES_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_SES_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 34 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeSES = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeSES = RxMessage[4]; - - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeSES = FarendStatsData.adslfeSES; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOSS_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_LOSS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeLOSS = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeLOSS = RxMessage[4]; - - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeLOSS = FarendStatsData.adslfeLOSS; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_UAS_FLAG)){ - if (adsl_mode<=8 && adsl_mode_extend == 0) - { - FAREND_PERF_UAS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 36 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeUAS = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeUAS = RxMessage[4]; - - } - }else - { - pts.adslFarEndPerfStats_pt->adslfeUAS = FarendStatsData.adslfeUAS; - } - } - - if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_HECERR_FLAG)){ - if (chantype.bearchannel0) - { - FAREND_PERF_HECERR_FLAG_BC0_MAKECMV; - }else if (chantype.bearchannel1) - { - FAREND_PERF_HECERR_FLAG_BC1_MAKECMV; - } - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 37 Index 0"); -#endif - pts.adslFarEndPerfStats_pt->adslfeHECErrors = 0; - } - else{ - pts.adslFarEndPerfStats_pt->adslfeHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); - } - } - - copy_to_user((char *)lon, (char *)pts.adslFarEndPerfStats_pt, sizeof(adslFarEndPerfStats)); - kfree(pts.adslFarEndPerfStats_pt); - - up(&mei_sema); - - break; -// 603221:tc.chen end - case GET_ADSL_LOOP_DIAGNOSTICS_MODE: - //lon = loop_diagnostics_mode; - copy_to_user((char *)lon, (char *)&loop_diagnostics_mode, sizeof(int)); - break; -//>> SHC - case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE: - copy_to_user((char *)lon, (char *)&loop_diagnostics_completed, sizeof(int)); - break; - -//<< end SHC - case LOOP_DIAGNOSTIC_MODE_COMPLETE: - loop_diagnostics_completed = 1; - // read adsl mode - makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - } - adsl_mode = RxMessage[4]; - - makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group STAT Address 1 Index 0"); -#endif - } - adsl_mode_extend = RxMessage[4]; - wake_up_interruptible(&wait_queue_loop_diagnostic); - break; - case SET_ADSL_LOOP_DIAGNOSTICS_MODE: - if (lon != loop_diagnostics_mode) - { - loop_diagnostics_completed = 0; - loop_diagnostics_mode = lon; - - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_REBOOT, NULL); - - } - break; - case GET_ADSL_ATUR_SUBCARRIER_STATS: - if (loop_diagnostics_completed == 0) - { - interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ); - if (loop_diagnostics_completed==0) - { - return -ERESTARTSYS; - } - } - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - pts.adslATURSubcarrierInfo_pt = (adslATURSubcarrierInfo *)kmalloc(sizeof(adslATURSubcarrierInfo), GFP_KERNEL); - copy_from_user((char *)pts.adslATURSubcarrierInfo_pt, (char *)lon, sizeof(adslATURSubcarrierInfo)); - - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINSC)){ - FAREND_HLINSC_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->HLINSCds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->HLINSCds = RxMessage[4]; - - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINPS)){ - int index=0,size=12; - //printk("FAREND_HLINPS\n"); - for (index=0;index<1024;index+=size) - { - if (index+size>=1024) - size = 1024-index; - FAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - memcpy(&pts.adslATURSubcarrierInfo_pt->HLINpsds[index],&RxMessage[4],size*2); -#if 0 - int msg_idx; - for(msg_idx=0;msg_idxflags)), FAREND_HLOGMT)){ - FAREND_HLOGMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->HLOGMTds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->HLOGMTds = RxMessage[4]; - - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGPS)){ - //printk("FAREND_HLOGPS\n"); - int index=0,size=12; - for (index=0;index<256;index+=size) - { - if (index+size>=256) - size = 256-index; - - FAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode - { - memcpy(&pts.adslATURSubcarrierInfo_pt->HLOGpsds[index],&RxMessage[4],size*2); - }else - { - int msg_idx=0; - for (msg_idx=0;msg_idxHLOGpsds[(index+msg_idx)*2+1] = RxMessage[4+msg_idx]; - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - } - } - } - if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode - { - pts.adslATURSubcarrierInfo_pt->HLOGpsds[0] = pts.adslATURSubcarrierInfo_pt->HLOGpsds[1]; - for (index=1;index<256;index++) - { - pts.adslATURSubcarrierInfo_pt->HLOGpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2+1] +1) >>1; - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNMT)){ - FAREND_QLNMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->QLNMTds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->QLNMTds = RxMessage[4]; - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNPS)){ - int index=0,size=12; - //printk("FAREND_QLNPS\n"); - for (index=0;index<128;index+=size) - { - if (index+size>=128) - size = 128-index; - FAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idxQLNpsds[index],&RxMessage[4],size*2); - if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - }else - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - } - - - } - } - if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[0] = pts.adslATURSubcarrierInfo_pt->QLNpsds[1]; - for (index=1;index<256;index++) - { - pts.adslATURSubcarrierInfo_pt->QLNpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2+1]) >>1; - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRMT)){ - FAREND_SNRMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - pts.adslATURSubcarrierInfo_pt->SNRMTds = 0; - } - else{ - pts.adslATURSubcarrierInfo_pt->SNRMTds = RxMessage[4]; - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRPS)){ - int index=0,size=12; - //printk("FAREND_SNRPS\n"); - for (index=0;index<512;index+=size) - { - if (index+size>=512) - size = 512-index; - FAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - //memcpy(&pts.adslATURSubcarrierInfo_pt->SNRpsds[index],&RxMessage[4],size*2); - int msg_idx=0; - for (msg_idx=0;msg_idxSNRpsds[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_BITPS)){ - int index=0,size=12; - //printk("FAREND_BITPS\n"); - for (index=0;index<256;index+=size) - { - if (index+size>=256) - size = 256-index; - FAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idxBITpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X, %d\n",index+msg_idx,RxMessage[4+msg_idx],RxMessage[4+msg_idx]); - - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_GAINPS)){ - int index=0,size=12; - //printk("FAREND_GAINPS\n"); - for (index=0;index<512;index+=size) - { - FAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - } - else{ - /* - int msg_idx=0; - for (msg_idx=0;msg_idxGAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF; - pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF; - - } - */ - memcpy(&pts.adslATURSubcarrierInfo_pt->GAINpsds[index],&RxMessage[4],size*2); -#if 0 - int msg_idx=0; - for (msg_idx=0;msg_idxflags)), NEAREND_HLINSC)){ - NEAREND_HLINSC_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 71 Index 2"); -#endif - pts.adslATUCSubcarrierInfo_pt->HLINSCus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->HLINSCus = RxMessage[4]; - - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINPS)){ - int index=0,size=12; - //printk("NEAREND_HLINPS\n"); - for (index=0;index<128;index+=size) - { - if (index+size>=128) - size = 128-index; - NEAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 73 Index 0"); -#endif - } - else{ - memcpy(&pts.adslATUCSubcarrierInfo_pt->HLINpsus[index],&RxMessage[4],size*2); -#if 0 - int msg_idx; - for (msg_idx=0;msg_idxflags)), NEAREND_HLOGMT)){ - NEAREND_HLOGMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 80 Index 0"); -#endif - pts.adslATUCSubcarrierInfo_pt->HLOGMTus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->HLOGMTus = RxMessage[4]; - - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGPS)){ - int index=0,size=12; - //printk("NEAREND_HLOGPS\n"); - for (index=0;index<64;index+=size) - { - if (index+size>=64) - size = 64-index; - NEAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 75 Index 0"); -#endif - } - else{ -#if 0 - if (adsl_mode <0x4000)//adsl /adsl2 mode - { -#endif - memcpy(&pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index],&RxMessage[4],size*2); -#if 0 - }else - { - int msg_idx=0; - for (msg_idx=0;msg_idxHLOGpsus[(index+msg_idx)*2+1] = RxMessage[4+msg_idx]; - pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)] = RxMessage[4+msg_idx]; - } - } -#endif - } - } -#if 0 - if (adsl_mode >= 0x4000)//adsl2 mode - { - pts.adslATUCSubcarrierInfo_pt->HLOGpsus[0] = pts.adslATUCSubcarrierInfo_pt->HLOGpsus[1]; - for (index=1;index<64;index++) - { - pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2+1]) >>1; - } - } -#endif - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNMT)){ - NEAREND_QLNMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 80 Index 1"); -#endif - pts.adslATUCSubcarrierInfo_pt->QLNMTus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->QLNMTus = RxMessage[4]; - } - } - - ///////////////////////////////////////////////////////////////////////// - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNPS)){ - int index=0,size=12; - //printk("NEAREND_QLNPS\n"); - for (index=0;index<32;index+=size) - { - if (index+size>=32) - size = 32-index; - NEAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 77 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idxQLNpsds[index],&RxMessage[4],size*2); - if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M - if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - }else -#endif - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - } - - - } - } -#if 0 - //if (adsl_mode <0x4000)//Annex I/J/L/M - if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[0] = pts.adslATUCSubcarrierInfo_pt->QLNpsus[1]; - for (index=1;index<64;index++) - { - pts.adslATUCSubcarrierInfo_pt->QLNpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2+1]) >>1; - } - } -#endif - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRMT)){ - NEAREND_SNRMT_MAKECMV(H2D_CMV_READ); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 80 Index 2"); -#endif - pts.adslATUCSubcarrierInfo_pt->SNRMTus = 0; - } - else{ - pts.adslATUCSubcarrierInfo_pt->SNRMTus = RxMessage[4]; - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRPS)){ - int index=0,size=12; - //printk("NEAREND_SNRPS\n"); - for (index=0;index<64;index+=size) - { - if (index+size>=64) - size = 64-index; - NEAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 78 Index 0"); -#endif - } - else{ - //memcpy(&pts.adslATUCSubcarrierInfo_pt->SNRpsus[index],&RxMessage[4],size*2); - int msg_idx=0; - for (msg_idx=0;msg_idxSNRpsus[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_BITPS)){ - int index=0,size=12; - //printk("NEAREND_BITPS\n"); - for (index=0;index<32;index+=size) - { - if (index+size>=32) - size = 32-index; - NEAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 22 Index 0"); -#endif - } - else{ - int msg_idx=0; - for (msg_idx=0;msg_idxBITpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); - pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); - //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); - } - - } - } - } - if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_GAINPS)){ - int index=0,size=12; - //printk("NEAREND_GAINPS\n"); - for (index=0;index<64;index+=size) - { - if (index+size>=64) - size = 64-index; - NEAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size); - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group INFO Address 24 Index 0"); -#endif - } - else{ - /* - int msg_idx=0; - for (msg_idx=0;msg_idxGAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF; - pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF; - - } - */ - memcpy(&pts.adslATUCSubcarrierInfo_pt->GAINpsus[index],&RxMessage[4],size*2); -#if 0 - int msg_idx; - for (msg_idx=0;msg_idxACTPSDus = ((int )(j*256 - temp*10*256 + k*10)) /256; - } - // DS - i=0; - j=temp=temp2=0; - NOMPSD_DS_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - j=RxMessage[4]; - } - PCB_DS_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - temp=RxMessage[4]; - } - RMSGI_DS_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); -#endif - i=-1; - } - else{ - //temp2=RxMessage[4]; - k=(int16_t)RxMessage[4]; - } - if (i==0) - { - pts.adslPowerSpectralDensity_pt->ACTPSDds = ((int )(j*256 - temp*10*256 + k*10)) /256; - } - copy_to_user((char *)lon, (char *)pts.adslPowerSpectralDensity_pt, sizeof(adslPowerSpectralDensity)); - kfree(pts.adslPowerSpectralDensity_pt); - up(&mei_sema); - break; - case AMAZON_MEI_START: - showtime=0; - loop_diagnostics_completed = 0; -#ifdef ARC_READY_ACK -#ifdef LOCK_RETRY - i=0; -lock_retry: - if(down_trylock(&mei_sema)!=0) - { - reboot_lock = 1; - printk("lock fail\n"); - i++; - if (i <=5) - { - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); - goto lock_retry; - }else - { - printk("Force to Reboot ADSL!\n"); - up(&mei_sema); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(1000); - sema_init(&mei_sema, 1); // semaphore initialization, mutex - } - }else - { - reboot_lock = 1; - } -#else - if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready - { - return -ERESTARTSYS; - } -#endif -#endif - //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON - if(chantype.interleave==1){ - kfree(interleave_mei_net.priv); - unregister_netdev(&interleave_mei_net); - } - else if(chantype.fast==1){ - kfree(fast_mei_net.priv); - unregister_netdev(&fast_mei_net); - } - chantype.interleave=0; - chantype.fast=0; - meiMailboxInterruptsDisable(); //disable all MEI interrupts - if(mei_arc_swap_buff == NULL){ - mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL); - if(mei_arc_swap_buff==NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n malloc fail for codeswap buff"); -#endif - meierr=MEI_FAILURE; - } - } - if(meiForceRebootAdslModem() != MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n meiForceRebootAdslModem() error..."); -#endif - meierr=MEI_FAILURE; - } - interruptible_sleep_on(&wait_queue_codeswap); - // reset is called - break; - case AMAZON_MEI_MIB_DAEMON: -#ifdef IFX_SMALL_FOOTPRINT /* [ */ - return -1; -#else /* ][ !IFX_SMALL_FOOTPRINT */ - i=0; - while(1){ - if(istart_time.tv_sec>=900){ - if(current_intvl->list.next!=&interval_list){ - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - else{ - mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list); - list_del(interval_list.next); - memset(mib_ptr, 0, sizeof(amazon_mei_mib)); - list_add_tail(&(mib_ptr->list), &interval_list); - if(current_intvl->list.next==&interval_list) -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nlink list error"); -#endif - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - } - - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; -/* - ATUC_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 0 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AtucPerfLos++; - ATUC_PERF_LOSS++; - CurrStatus.adslAtucCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AtucPerfLof++; - ATUC_PERF_LOFS++; - CurrStatus.adslAtucCurrStatus = 1; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit))) - CurrStatus.adslAtucCurrStatus = 0; - } -*/ - ATUC_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 7 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS; - if(temp>=0){ - current_intvl->AtucPerfEs+=temp; - ATUC_PERF_ESS+=temp; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - } -/* - ATUR_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 1 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AturPerfLos++; - ATUR_PERF_LOSS++; - CurrStatus.adslAturCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AturPerfLof++; - ATUR_PERF_LOFS++; - CurrStatus.adslAturCurrStatus = 1; - } - if(RxMessage[4]&PLAM_LPR_FailureBit){ - current_intvl->AturPerfLpr++; - ATUR_PERF_LPR++; - CurrStatus.adslAturCurrStatus = 3; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit))) - CurrStatus.adslAturCurrStatus = 0; - } -*/ - ATUR_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 33 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS; - if(temp>=0){ - current_intvl->AturPerfEs+=temp; - ATUR_PERF_ESS+=temp; - mib_pread.ATUR_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - mib_pread.ATUR_PERF_ESS=RxMessage[4]; - } - } - // to update rx/tx blocks - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); -#endif - } - else{ - temp = RxMessage[4]; - } - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); -#endif - } - else{ - temp2 = RxMessage[4]; - } - if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){ - current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - else{ - current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk; - ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK; -/* - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=RxMessage[4]; - ATUR_CHAN_TX_BLK+=RxMessage[4]; - } - } - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16); - ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16); - } - } -*/ - if(chantype.interleave == 1){ - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - } - } - - if(chantype.interleave == 1){ - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - } - } - - //RFC-3440 - -#ifdef AMAZON_MEI_MIB_RFC3440 - ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFastR+=temp; - ATUC_PERF_STAT_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - } - ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFailedFastR+=temp; - ATUC_PERF_STAT_FAILED_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - } - ATUC_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 8 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatSesL+=temp; - ATUC_PERF_STAT_SESL+=temp; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - } - ATUC_PERF_STAT_UASL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 10 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - } - ATUR_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 34 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - } - -#endif - up(&mei_sema); - - do_gettimeofday(&time_fini); - i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec - }//showtime==1 - } - break; -#endif /* ] !IFX_SMALL_FOOTPRINT */ - case AMAZON_MEI_RESET: - case AMAZON_MEI_REBOOT: - case AMAZON_MEI_SHOWTIME: -/* if(mei_arc_swap_buff !=NULL){ - kfree(mei_arc_swap_buff); - mei_arc_swap_buff=NULL; - } - if(image_buffer !=NULL){ -// kfree(image_buffer); - vfree(image_buffer); - image_buffer =NULL; - } -*/ - if(clreoc_command_pkt !=NULL){ - kfree(clreoc_command_pkt); - clreoc_command_pkt =NULL; - } - for(i=0;istart_time)); - ATUC_PERF_LOFS=0; - ATUC_PERF_LOSS=0; - ATUC_PERF_ESS=0; - ATUC_PERF_INITS=0; - ATUR_PERF_LOFS=0; - ATUR_PERF_LOSS=0; - ATUR_PERF_LPR=0; - ATUR_PERF_ESS=0; - ATUR_CHAN_RECV_BLK=0; - ATUR_CHAN_TX_BLK=0; - ATUR_CHAN_CORR_BLK=0; - ATUR_CHAN_UNCORR_BLK=0; - memset((((u8 *)&AlarmConfProfile)+32), 0, 16*4); - AlarmConfProfile.adslLineAlarmConfProfileRowStatus=1; -*/ - PrevTxRate.adslAtucChanPrevTxRate=0; - PrevTxRate.adslAturChanPrevTxRate=0; - CurrStatus.adslAtucCurrStatus=0; - CurrStatus.adslAturCurrStatus=0; - - if((command==AMAZON_MEI_RESET) || (command==AMAZON_MEI_REBOOT)){ -#ifdef AMAZON_CHECK_LINK - if (adsl_link_notify){ - (*adsl_link_notify)(0); - } -#endif - showtime=0; - //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON - // disconnect net_dev - if(chantype.interleave==1){ - kfree(interleave_mei_net.priv); - unregister_netdev(&interleave_mei_net); -// if(unregister_netdev(&interleave_mei_net)!=0) -// printk("\n unregister interleave fail"); - } - else if(chantype.fast==1){ - kfree(fast_mei_net.priv); - unregister_netdev(&fast_mei_net); -// if(unregister_netdev(&fast_mei_net)!=0) -// printk("\n unregister fast fail"); - } - chantype.interleave=0; - chantype.fast=0; -// 603221:tc.chen start - chantype.bearchannel0 = 0; - chantype.bearchannel1 = 0; - adsl_mode = 0; -// 603221:tc.chen end - - while(1){ - - makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, NULL); //maximum allowed tx message length, in bytes - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ - //printk("AdslInitStatsData.FullInitializationCount++\n"); - AdslInitStatsData.FullInitializationCount++; - //printk("AdslInitStatsData.FailedFullInitializationCount++\n"); - AdslInitStatsData.FailedFullInitializationCount++; - //printk("AdslInitStatsData.LINIT_Errors++\n"); - AdslInitStatsData.LINIT_Errors++; - }else - { - //printk("RxMessage=%X\n",RxMessage[4]); - if ( RxMessage[4]!=0x1) - { - //printk("AdslInitStatsData.FullInitializationCount++\n"); - AdslInitStatsData.FullInitializationCount++; - if ( RxMessage[4] != 0x7) - { - //printk("AdslInitStatsData.LINIT_Errors++\n"); - AdslInitStatsData.LINIT_Errors++; - //printk("AdslInitStatsData.FailedFullInitializationCount++\n"); - AdslInitStatsData.FailedFullInitializationCount++; - - } - } - } - - reboot_flag=0; - wake_up_interruptible(&wait_queue_codeswap); //wake up codeswap daemon - - interruptible_sleep_on_timeout(&wait_queue_reboot, 1*HZ); // sleep until arc ready -#ifdef ARC_READY_ACK - if(reboot_flag!=0) - break; - else - { - up(&mei_sema); - printk("\n reboot retry"); - } -#else - break; -#endif - } - } - else{ //AMAZON_MEI_SHOWTIME - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; - - // clreoc stuff - makeCMV(H2D_CMV_READ, INFO, 83, 0, 1, data); //maximum allowed tx message length, in bytes - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 3 Address 83 Index 0"); -#endif - } - else{ - clreoc_max_tx_len = (int)RxMessage[4]; - clreoc_command_pkt = kmalloc((clreoc_max_tx_len*CLREOC_BUFF_SIZE), GFP_KERNEL); - if(clreoc_command_pkt == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("kmalloc error for clreoc_command_pkt\n\n"); -#endif - up(&mei_sema); - return -1; - } - for(i=0;ilen)>0){ - copy_to_user((char *)lon, (char*)(&(current_clreoc->len)), 4); - break; - } - else//wait for eoc data from higher layer - interruptible_sleep_on(&wait_queue_clreoc); - } - break; - case AMAZON_MEI_GET_EOC_DATA: - current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list); - if((current_clreoc->len)>0){ - copy_to_user((char*)lon, (char*)(current_clreoc->command), current_clreoc->len); - meierr=1; - list_del(clreoc_list.next); //remove and add to end of list - current_clreoc->len = 0; - list_add_tail(&(current_clreoc->list), &clreoc_list); - } - else - meierr=-1; - break; - case AMAZON_MEI_EOC_SEND: - copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr)); - eoc_skb = dev_alloc_skb(debugrdwr.iCount*4); - if(eoc_skb==NULL){ - printk("\n\nskb alloc fail"); - break; - } - - eoc_skb->len=debugrdwr.iCount*4; - memcpy(skb_put(eoc_skb, debugrdwr.iCount*4), (char *)debugrdwr.buffer, debugrdwr.iCount*4); - - ifx_push_eoc(eoc_skb); //pass data to higher layer - break; -#endif //#ifdef AMAZON_CLEAR_EOC - case AMAZON_MIB_LO_ATUC: - do_gettimeofday(&time_now); - if(lon&0x1){ - if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec)>2){ - current_intvl->AtucPerfLos++; - ATUC_PERF_LOSS++; - CurrStatus.adslAtucCurrStatus = 2; - } - (mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec; - } - if(lon&0x2){ - if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec)>2){ - current_intvl->AtucPerfLof++; - ATUC_PERF_LOFS++; - CurrStatus.adslAtucCurrStatus = 1; - } - (mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec; - } - if(!(lon&0x3)) - CurrStatus.adslAtucCurrStatus = 0; - break; - case AMAZON_MIB_LO_ATUR: - do_gettimeofday(&time_now); - if(lon&0x1){ - if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec)>2){ - current_intvl->AturPerfLos++; - ATUR_PERF_LOSS++; - CurrStatus.adslAturCurrStatus = 2; - } - (mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec; - } - if(lon&0x2){ - if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec)>2){ - current_intvl->AturPerfLof++; - ATUR_PERF_LOFS++; - CurrStatus.adslAturCurrStatus = 1; - } - (mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec; - } - if(lon&0x4){ - if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec)>2){ - current_intvl->AturPerfLpr++; - ATUR_PERF_LPR++; - CurrStatus.adslAturCurrStatus = 3; - } - (mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec = time_now.tv_sec; - } - if(!(lon&0x7)) - CurrStatus.adslAturCurrStatus = 0; - break; - case AMAZON_MEI_DOWNLOAD: - // DMA the boot code page(s) -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n start download pages"); -#endif - for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++){ - if( img_hdr->page[boot_loop].p_size & BOOT_FLAG){ - page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0){ - meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size); - } - } - if( img_hdr->page[boot_loop].d_size & BOOT_FLAG){ - page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( page_size > 0){ - meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size); - } - } - } -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n pages downloaded"); -#endif - break; - //509221:tc.chen start - case AMAZON_MEI_DEBUG_MODE: - mei_debug_mode = lon; - break; - //509221:tc.chen end - } - return meierr; -} - - -////////////////////// Interrupt handler ///////////////////////////////////////////////////// -static void mei_interrupt_arcmsgav(int,void *,struct pt_regs *); -static void mei_interrupt_arcmsgav(int int1, void * void0, struct pt_regs * regs) -{ - u32 scratch; - u32 fetchpage; - u32 size; - u32 dest_addr; - u32 temp; - int i; - - meiDebugRead(ARC_MEI_MAILBOXR, &scratch, 1); - if(scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK) - { - if(showtime==1){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n Code Swap Request After ShowTime !!!"); -#endif - } - else{ -#ifdef AMAZON_MEI_DEBUG_ON -// printk("\n\n Code Swap Request"); -#endif - fetchpage = scratch & ~OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK; - size = meiGetPage( fetchpage, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( size > 0) - { -#ifdef AMAZON_MEI_DEBUG_ON -// printk(" : prom page num %d",fetchpage); -#endif - meiDMAWrite( dest_addr, mei_arc_swap_buff, size); - } - - size = meiGetPage( fetchpage, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); - if( size > 0) - { -#ifdef AMAZON_MEI_DEBUG_ON -// printk(" : data page num %d",fetchpage); -#endif - meiDMAWrite( dest_addr, mei_arc_swap_buff, size); - } - } - // Notify arc that mailbox read complete - meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); - - // Tell ARC Codeswap is done - meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_CS_DONE); - asm("SYNC"); - i=0; - while(i>4)==D2H_AUTONOMOUS_MODEM_READY_MSG){ //check ARC ready message - -#ifdef LOCK_RETRY - if (reboot_lock) - { - reboot_lock = 0; - up(&mei_sema); // allow cmv access - } -#else - up(&mei_sema); // allow cmv access -#endif - reboot_flag=1; -//#ifdef ADSL_LED_SUPPORT -#if 0 - led_support_check=1;//adsl led for 1.1.2.7.1.1 - adsl_led_flash();//adsl led for 1.1.2.7.1.1 -#endif - wake_up_interruptible(&wait_queue_reboot); // wait up ioctl reboot - } -#endif - } - } -// meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); - mask_and_ack_amazon_irq(AMAZON_MEI_INT); - return; -} - -// 603221:tc.chen start -////////////////////////hdlc //////////////// - -// get hdlc status -static unsigned int ifx_me_hdlc_status(void) -{ - u16 CMVMSG[MSG_LENGTH]; - int ret; - - if (showtime!=1) - return -ENETRESET; - - makeCMV_local(H2D_CMV_READ, STAT, 14, 0, 1, NULL,CMVMSG); //Get HDLC status - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - return CMVMSG[4]&0x0F; -} - -int ifx_me_is_resloved(int status) -{ - u16 CMVMSG[MSG_LENGTH]; - int ret; - - if (status == ME_HDLC_MSG_QUEUED || status == ME_HDLC_MSG_SENT) - return ME_HDLC_UNRESOLVED; - if (status == ME_HDLC_IDLE) - { - makeCMV_local(H2D_CMV_READ, CNTL, 2, 0, 1, NULL,CMVMSG); //Get ME-HDLC Control - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return IFX_POP_EOC_FAIL; - } - if (CMVMSG[4]&(1<<0)) - { - return ME_HDLC_UNRESOLVED; - } - - } - return ME_HDLC_RESOLVED; -} - -int _ifx_me_hdlc_send(unsigned char *hdlc_pkt,int len,int max_length) -{ - int ret; - u16 CMVMSG[MSG_LENGTH]; - u16 data=0; - u16 pkt_len=len; - if (pkt_len > max_length) - { - printk("Exceed maximum eoc message length\n"); - return -ENOBUFS; - } - //while(pkt_len > 0) - { - makeCMV_local(H2D_CMV_WRITE, INFO, 81, 0, (pkt_len+1)/2,(u16 *)hdlc_pkt,CMVMSG); //Write clear eoc message to ARC - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - - makeCMV_local(H2D_CMV_WRITE, INFO, 83, 2, 1,&pkt_len,CMVMSG); //Update tx message length - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - - data = (1<<0); - makeCMV_local(H2D_CMV_WRITE, CNTL, 2, 0, 1,&data,CMVMSG); //Start to send - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - return 0; - } -} - -static int ifx_me_hdlc_send(unsigned char *hdlc_pkt,int hdlc_pkt_len) -{ - int hdlc_status=0; - u16 CMVMSG[MSG_LENGTH]; - int max_hdlc_tx_length=0,ret=0,retry=0; - - while(retry<10) - { - hdlc_status = ifx_me_hdlc_status(); - if (ifx_me_is_resloved(hdlc_status)==ME_HDLC_RESOLVED) // arc ready to send HDLC message - { - makeCMV_local(H2D_CMV_READ, INFO, 83, 0, 1, NULL,CMVMSG); //Get Maximum Allowed HDLC Tx Message Length - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - max_hdlc_tx_length = CMVMSG[4]; - ret = _ifx_me_hdlc_send(hdlc_pkt,hdlc_pkt_len,max_hdlc_tx_length); - return ret; - } - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); - } - return -EBUSY; -} - -int ifx_mei_hdlc_read(char *hdlc_pkt,int max_hdlc_pkt_len) -{ - u16 CMVMSG[MSG_LENGTH]; - int msg_read_len,ret=0,pkt_len=0,retry = 0; - - while(retry<10) - { - ret = ifx_me_hdlc_status(); - if (ret == ME_HDLC_RESP_RCVD) - { - int current_size=0; - makeCMV_local(H2D_CMV_READ, INFO, 83, 3, 1, NULL,CMVMSG); //Get EoC packet length - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - return -EIO; - } - - pkt_len = CMVMSG[4]; - if (pkt_len > max_hdlc_pkt_len) - { - ret = -ENOMEM; - goto error; - } - while( current_size < pkt_len) - { - if (pkt_len - current_size >(MSG_LENGTH*2-8)) - msg_read_len = (MSG_LENGTH*2-8); - else - msg_read_len = pkt_len - (current_size); - makeCMV_local(H2D_CMV_READ, INFO, 82, 0 + (current_size/2), (msg_read_len+1)/2, NULL,CMVMSG); //Get hdlc packet - ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - if (ret != 0) - { - goto error; - } - memcpy(hdlc_pkt+current_size,&CMVMSG[4],msg_read_len); - current_size +=msg_read_len; - } - ret = current_size; - break; - }else - { - ret = -ENODATA; - } - - retry++; - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(10); - - } - return ret; -error: - - return ret; -} - -////////////////////////hdlc //////////////// -// 603221:tc.chen end - -/////////////////////// clearEoC, int ifx_pop_eoc(sk_buff * pkt) ////////// -int ifx_pop_eoc(struct sk_buff * pkt); -int ifx_pop_eoc(struct sk_buff * pkt) -{ - amazon_clreoc_pkt * current; - if(showtime!=1){ - dev_kfree_skb(pkt); - return IFX_POP_EOC_FAIL; - } - if((pkt->len)>clreoc_max_tx_len){ - dev_kfree_skb(pkt); - return IFX_POP_EOC_FAIL; - } - current = list_entry(clreoc_list.next, amazon_clreoc_pkt, list); - while(1){ - if(current->len==0){ - memcpy(current->command, pkt->data, pkt->len); - current->len=pkt->len; - break; - } - else{ - if((current->list).next==&clreoc_list){ - dev_kfree_skb(pkt); - return IFX_POP_EOC_FAIL; //buffer full - } - current = list_entry((current->list).next,amazon_clreoc_pkt, list); - } - } - wake_up_interruptible(&wait_queue_clreoc); - - dev_kfree_skb(pkt); - return IFX_POP_EOC_DONE; -} -/* this is used in circular fifo mode */ -/* -int ifx_pop_eoc(sk_buff * pkt); -int ifx_pop_eoc(sk_buff * pkt) -{ - int buff_space,i; - if(showtime!=1) - return IFX_POP_EOC_FAIL; - - if(clreoc_wr>=clreoc_rd) - buff_space = (MEI_CLREOC_BUFF_SIZE-1)-(clreoc_wr - clreoc_rd); - else - buff_space = clreoc_rd - clreoc_wr - 1; - if((pkt->len)>buff_space) - return IFX_POP_EOC_FAIL; - - if((clreoc_wr+pkt->len)>MEI_CLREOC_BUFF_SIZE){ - memcpy((clreoc+clreoc_wr), pkt->data, ((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1)); - memcpy(clreoc, (pkt->data)+((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1), (pkt->len)-((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1)); - clreoc_wr=(clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE; - } - else{ - memcpy((clreoc+clreoc_wr), pkt->data, pkt->len); - if((clreoc_wr+pkt->len)=MEI_CLREOC_BUFF_SIZE) - clreoc_wr=0; - else - clreoc_wr+=pkt->len; - } - wake_up_interruptible(&wait_queue_clreoc); - return IFX_POP_EOC_DONE; -} -*/ - - -//////////////////////////////////////////////////////////////////////////// -//int amazon_mei_init_module (void); -//void amazon_mei_cleanup_module (void); -//int __init init_module (void); -//void __exit cleanup_module (void); - -int __init amazon_mei_init_module(void) -//int __init init_module(void) -{ - struct proc_dir_entry *entry; - int i; - -//dying gasp-start -#ifdef IFX_DYING_GASP - -//000003:fchang Start -#ifdef CONFIG_CPU_AMAZON_E - //GPIO31 :dying gasp event indication - // (1) logic high: dying gasp event is false (default) - // (2) logic low: dying gasp event is true - CLEAR_BIT((*((volatile u32 *)0xB0100B18)), 0x4); - CLEAR_BIT((*((volatile u32 *)0xB0100B1c)), 0x4); - CLEAR_BIT((*((volatile u32 *)0xB0100B20)), 0x4); - SET_BIT((*((volatile u32 *)0xB0100B24)), 0x4); - asm("SYNC"); -#else //000003:fchang End - - //GPIO31 :dying gasp event indication - // (1) logic high: dying gasp event is false (default) - // (2) logic low: dying gasp event is true - CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000); - CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000); - CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000); - SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000); -#if 0 -//warning-led-start -//GPIO 22 - SET_BIT ((*((volatile u32 *)0xB0100B48)), 0x40); - CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x40); - CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x40); - SET_BIT((*((volatile u32 *)0xB0100B54)), 0x40); - CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //GPIO ON - printk("LED ON ON ON ON ON ON....."); -//warning-led-end -#endif - asm("SYNC"); -#endif //000003:fchang - -#endif //IFX_DYING_GASP -//dying gasp -end - - - reg_entry_t regs_temp[PROC_ITEMS] = // Items being debugged - { - /* { flag, name, description } */ - { &arcmsgav, "arcmsgav", "arc to mei message ", 0 }, - { &cmv_reply, "cmv_reply", "cmv needs reply", 0}, - { &cmv_waiting, "cmv_waiting", "waiting for cmv reply from arc", 0}, - { &indicator_count, "indicator_count", "ARC to MEI indicator count", 0}, - { &cmv_count, "cmv_count", "MEI to ARC CMVs", 0}, - { &reply_count, "reply_count", "ARC to MEI Reply", 0}, - { (int *)Recent_indicator, "Recent_indicator", "most recent indicator", 0}, - { (int *)8, "version", "version of firmware", 0}, - }; - memcpy((char *)regs, (char *)regs_temp, sizeof(regs_temp)); - - - //sema_init(&mei_sema, 0); // semaphore initialization, mutex - sema_init(&mei_sema, 1); // semaphore initialization, mutex - - init_waitqueue_head(&wait_queue_arcmsgav); // for ARCMSGAV - init_waitqueue_head(&wait_queue_codeswap); // for codeswap daemon - init_waitqueue_head(&wait_queue_mibdaemon); // for mib daemon - init_waitqueue_head(&wait_queue_reboot); // for ioctl reboot - init_waitqueue_head(&wait_queue_clreoc); // for clreoc_wr function - init_waitqueue_head(&wait_queue_loop_diagnostic); // for loop diagnostic function -#ifdef ADSL_LED_SUPPORT - init_waitqueue_head(&wait_queue_led); // adsl led for led function - init_waitqueue_head(&wait_queue_led_polling); // adsl led for led function - led_task.routine = adsl_led_flash_task; // adsl led for led function - led_poll_init(); // adsl led for led function -#endif //ADSL_LED_SUPPORT -#ifdef IFX_DYING_GASP - init_waitqueue_head(&wait_queue_dying_gasp); // IFX_DYING_GASP - lop_poll_init(); // IFX_DYING_GASP -#endif //IFX_DYING_GASP - - init_waitqueue_head(&wait_queue_uas_poll);//joelin 04/16/2005 - unavailable_seconds_poll_init();//joelin 04/16/2005 - memset(&mib_pflagtime, 0, (sizeof(mib_flags_pretime))); - - // initialize link list for intervals - mei_mib = (amazon_mei_mib *)kmalloc((sizeof(amazon_mei_mib)*INTERVAL_NUM), GFP_KERNEL); - if(mei_mib == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("kmalloc error for amazon_mei_mib\n\n"); -#endif - return -1; - } - memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM)); - INIT_LIST_HEAD(&interval_list); - for(i=0;istart_time)); - // initialize clreoc list - clreoc_pkt = (amazon_clreoc_pkt *)kmalloc((sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE), GFP_KERNEL); - if(clreoc_pkt == NULL){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("kmalloc error for clreoc_pkt\n\n"); -#endif - return -1; - } - memset(clreoc_pkt, 0, (sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE)); - INIT_LIST_HEAD(&clreoc_list); - for(i=0;ilow_ino; - entry->proc_fops = &proc_operations; - } else { -#ifdef AMAZON_MEI_DEBUG_ON - printk( KERN_ERR - ": can't create /proc/" MEI_DIRNAME - "/%s\n\n", regs[i].name); -#endif - return(-ENOMEM); - } - } - ///////////////////////////////// register net device //////////////////////////// - if(register_netdev(&phy_mei_net)!=0){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\n Register phy Device Failed."); -#endif - return -1; - } -/* - if(register_netdev(&interleave_mei_net)!=0){ - printk("\n\n Register interleave Device Failed."); - return -1; - } - if(register_netdev(&fast_mei_net)!=0){ - printk("\n\n Register fast Device Failed."); - return -1; - } -*/ -#ifdef DFE_LOOPBACK - mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL); - if (mei_arc_swap_buff){ -#ifdef ARC_READY_ACK - if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready - { - return -ERESTARTSYS; - } -#ifdef LOCK_RETRY - reboot_lock = 1; -#endif -#endif - meiForceRebootAdslModem(); - kfree(mei_arc_swap_buff); - }else{ -#ifdef AMAZON_MEI_DEBUG_ON - printk("cannot load image: no memory\n\n"); -#endif - } -#endif -#ifdef IFX_SMALL_FOOTPRINT - mib_poll_init(); -#endif - return 0; -} - -void __exit amazon_mei_cleanup_module(void) -//void __exit cleanup_module(void) -{ - int i; -#ifdef ADSL_LED_SUPPORT - stop_led_module=1; //wake up and clean led module - led_support_check=0;//joelin , clear task - showtime=0;//joelin,clear task - //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON - firmware_support_led=0;//joelin ,clear task - wake_up_interruptible(&wait_queue_led); //wake up and clean led module - wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module -#endif - for(i=0;icomm, "kmibpoll"); - sigfillset(&tsk->blocked); - - printk("Inside mib poll loop ...\n"); - i=0; - while(1){ - if(istart_time.tv_sec>=900){ - if(current_intvl->list.next!=&interval_list){ - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - else{ - mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list); - list_del(interval_list.next); - memset(mib_ptr, 0, sizeof(amazon_mei_mib)); - list_add_tail(&(mib_ptr->list), &interval_list); - if(current_intvl->list.next==&interval_list) -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nlink list error"); -#endif - current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); - do_gettimeofday(&(current_intvl->start_time)); - } - } - - if(down_interruptible(&mei_sema)) - return -ERESTARTSYS; -/* - ATUC_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 0 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AtucPerfLos++; - ATUC_PERF_LOSS++; - CurrStatus.adslAtucCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AtucPerfLof++; - ATUC_PERF_LOFS++; - CurrStatus.adslAtucCurrStatus = 1; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit))) - CurrStatus.adslAtucCurrStatus = 0; - } -*/ - - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 7 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS; - if(temp>=0){ - current_intvl->AtucPerfEs+=temp; - ATUC_PERF_ESS+=temp; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; - mib_pread.ATUC_PERF_ESS = RxMessage[4]; - } - } -/* - ATUR_PERF_LO_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 1 Index 0"); -#endif - } - else{ - if(RxMessage[4]&PLAM_LOS_FailureBit){ - current_intvl->AturPerfLos++; - ATUR_PERF_LOSS++; - CurrStatus.adslAturCurrStatus = 2; - } - if(RxMessage[4]&PLAM_LOF_FailureBit){ - current_intvl->AturPerfLof++; - ATUR_PERF_LOFS++; - CurrStatus.adslAturCurrStatus = 1; - } - if(RxMessage[4]&PLAM_LPR_FailureBit){ - current_intvl->AturPerfLpr++; - ATUR_PERF_LPR++; - CurrStatus.adslAturCurrStatus = 3; - } - if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit))) - CurrStatus.adslAturCurrStatus = 0; - } -*/ - if(showtime!=1) - goto mib_poll_end; - ATUR_PERF_ESS_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 33 Index 0"); -#endif - } - else{ - temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS; - if(temp>=0){ - current_intvl->AturPerfEs+=temp; - ATUR_PERF_ESS+=temp; - mib_pread.ATUR_PERF_ESS = RxMessage[4]; - } - else{ - current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; - mib_pread.ATUR_PERF_ESS=RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - // to update rx/tx blocks - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); -#endif - } - else{ - temp = RxMessage[4]; - } - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); -#endif - } - else{ - temp2 = RxMessage[4]; - } - if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){ - current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - else{ - current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); - mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); - } - current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk; - ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK; -/* - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 20 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=RxMessage[4]; - ATUR_CHAN_TX_BLK+=RxMessage[4]; - } - } - ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) - printk("\n\nCMV fail, Group 7 Address 21 Index 0"); - else{ - if(RxMessage[4]){ - current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16); - ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16); - } - } -*/ - if(chantype.interleave == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 3 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfCorrBlk+=temp; - ATUR_CHAN_CORR_BLK+=temp; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; - } - } - } - - if(chantype.interleave == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; - } - } - } - else if(chantype.fast == 1){ - if(showtime!=1) - goto mib_poll_end; - ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 2 Index 1"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST; - if(temp>=0){ - current_intvl->AturChanPerfUncorrBlk+=temp; - ATUR_CHAN_UNCORR_BLK+=temp; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - else{ - current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; - } - } - } - - //RFC-3440 - -#ifdef AMAZON_MEI_MIB_RFC3440 - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFastR+=temp; - ATUC_PERF_STAT_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //??? - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 0 Address 0 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR; - if(temp>=0){ - current_intvl->AtucPerfStatFailedFastR+=temp; - ATUC_PERF_STAT_FAILED_FASTR+=temp; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 8 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatSesL+=temp; - ATUC_PERF_STAT_SESL+=temp; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUC_PERF_STAT_UASL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 10 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; - mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; - } - } - if(showtime!=1) - goto mib_poll_end; - ATUR_PERF_STAT_SESL_FLAG_MAKECMV; - if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ -#ifdef AMAZON_MEI_DEBUG_ON - printk("\n\nCMV fail, Group 7 Address 34 Index 0"); -#endif - } - else{ - temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL; - if(temp>=0){ - current_intvl->AtucPerfStatUasL+=temp; - ATUC_PERF_STAT_UASL+=temp; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - else{ - current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; - mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; - } - } - -#endif -mib_poll_end: - up(&mei_sema); - - do_gettimeofday(&time_fini); - i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec - }//showtime==1 - } - -} -int mib_poll_init(void) -{ - printk("Starting mib_poll...\n"); - - kernel_thread(adsl_mib_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} -#endif //IFX_SMALL_FOOTPRINT -//EXPORT_NO_SYMBOLS; - -#ifdef ADSL_LED_SUPPORT -// adsl led -start -int led_status_on=0,led_need_to_flash=0; -int led_current_flashing=0; -unsigned long led_delay=0; -static int led_poll(void *unused) -{ - stop_led_module=0; //begin polling ... - while(!stop_led_module){ - if ((!led_status_on)&&(!led_need_to_flash)) interruptible_sleep_on_timeout (&wait_queue_led_polling,1000); //10 seconds timeout for waiting wakeup -// else printk("direct running task, no waiting"); - run_task_queue(&tq_ifx_led);//joelin task -// printk("led and LOP polling...\n"); - } - return 0; -} -static int led_poll_init(void) -{ -// printk("Starting adsl led polling...\n"); - -//warning-led-start -// CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON -//warning-led-end - - kernel_thread(led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} - -int adsl_led_flash(void) -{ - int i; - if (!firmware_support_led) return 0; //joelin version check - - if (led_status_on == 0 && led_need_to_flash == 0) - { - queue_task(&led_task, &tq_ifx_led);//joelin task - wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module -// printk("queue Task 1...\n"); //joelin test - } - led_need_to_flash=1;//asking to flash led - - return 0; -} - -int adsl_led_flash_task(void *ptr) -{ - - u16 one=1; - u16 zero=0; - u16 data=0x0600; - int kernel_use=1; - u16 CMVMSG[MSG_LENGTH]; -//adsl-led-start for >v1.1.2.7.1.1 -// printk("Task Running...\n"); //joelin test - if ((firmware_support_led==2)&&(led_support_check)) - { - led_support_check=0; - data=0x0600; - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &data,CMVMSG); //configure GPIO9 GPIO10 as outputs - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 2, 1, &data,CMVMSG); //enable writing to bit 9 and bit10 - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - - data=0x0a01; - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 4, 1, &data,CMVMSG); //use GPIO10 for TR68 .Enable and don't invert. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - -#ifdef DATA_LED_ON_MODE - data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on. -#else - data=0x0900; -#endif - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .turn off. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); - - } - if (!showtime) {led_need_to_flash=0; return 0;} -//adsl-led-end for >v1.1.2.7.1.1 - - if (led_status_on == 0 || led_need_to_flash == 1) - { - - if (led_current_flashing==0) - { - if (firmware_support_led==1){//>1.1.2.3.1.1 - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &one,CMVMSG); //flash - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - } - else if (firmware_support_led==2){//>1.1.2.7.1.1 - data=0x0901;//flash - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .flash. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - - }//(firmware_support_led==2) - led_current_flashing = 1;//turn on led - } - led_status_on=1; - - do{//do nothing , waiting untill no data traffic - led_need_to_flash=0; - interruptible_sleep_on_timeout(&wait_queue_led, 25); //the time for LED Off , if no data traffic - }while(led_need_to_flash==1); - - }else if (led_status_on == 1 && led_need_to_flash==0) - { - if (led_current_flashing==1) - {//turn off led - if (firmware_support_led==1){//>1.1.2.3.1.1 - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &zero,CMVMSG);//off - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - } //>1.1.2.3.1.1 - else if (firmware_support_led==2){//>1.1.2.7.1.1 -#ifdef DATA_LED_ON_MODE - data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on. -#else - data=0x0900;//off -#endif - makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .off. - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); - - }//(firmware_support_led==2) - led_status_on=0; - led_current_flashing = 0; - } - } - - if (led_status_on == 1 || led_need_to_flash) - {//led flash job on going or led need to flash - queue_task(&led_task, &tq_ifx_led); //joelin task -// printk("queue Task 2...\n"); //joelin test - } - return 0; -} -//joelin adsl led-end -#else -int adsl_led_flash(void) -{ - return 0; -} -#endif //ADSL_LED_SUPPORT -#ifdef IFX_DYING_GASP -static int lop_poll(void *unused) -{ - - while(1) - { - interruptible_sleep_on_timeout(&wait_queue_dying_gasp, 1); -#ifdef CONFIG_CPU_AMAZON_E //000003:fchang - if(showtime&&((*((volatile u32 *)0xB0100B14))&0x4)==0x0) {//000003:fchang -#else //000003:fchang - if(showtime&&((*((volatile u32 *)0xB0100B44))&0x8000)==0x0) { -#endif //CONFIG_CPU_AMAZON_E - mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_WRITEDEBUG, &lop_debugwr); - printk("send dying gasp..\n");} - - } - return 0; - } -static int lop_poll_init(void) -{ -// printk("Starting LOP polling...\n"); - kernel_thread(lop_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} - -#endif //IFX_DYING_GASP - -//joelin 04/16/2005-satrt -static int unavailable_seconds_poll(void *unused) -{ - while(1){ - interruptible_sleep_on_timeout (&wait_queue_uas_poll,100); //1 second timeout for waiting wakeup - if (!showtime) unavailable_seconds++; - } - return 0; -} -static int unavailable_seconds_poll_init(void) -{ - - kernel_thread(unavailable_seconds_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); - return 0; -} - - -//joelin 04/16/2005-end -EXPORT_SYMBOL(meiDebugWrite); -EXPORT_SYMBOL(ifx_pop_eoc); - -MODULE_LICENSE("GPL"); - -module_init(amazon_mei_init_module); -module_exit(amazon_mei_cleanup_module); - diff --git a/target/linux/amazon-2.6/files/drivers/char/ifx_ssc.c b/target/linux/amazon-2.6/files/drivers/char/ifx_ssc.c deleted file mode 100644 index ea01659a94..0000000000 --- a/target/linux/amazon-2.6/files/drivers/char/ifx_ssc.c +++ /dev/null @@ -1,2121 +0,0 @@ -/************************************************** - * - * drivers/ifx/serial/ifx_ssc.c - * - * Driver for IFX_SSC serial ports - * - * Copyright (C) 2004 Infineon Technologies AG - * Author Michael Schoenenborn (IFX COM TI BT) - * - */ -#define IFX_SSC_DRV_VERSION "0.2.1" -/* - ************************************************** - * - * This driver was originally based on the INCA-IP driver, but due to - * fundamental conceptual drawbacks there has been changed a lot. - * - * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn - * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -// ### TO DO: general issues: -// - power management -// - interrupt handling (direct/indirect) -// - pin/mux-handling (just overall concept due to project dependency) -// - multiple instances capability -// - slave functionality - -/* - * Include section - */ -#ifndef EXPORT_SYMTAB -#define EXPORT_SYMTAB -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -//#include - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#ifdef SSC_FRAME_INT_ENABLE -#undef SSC_FRAME_INT_ENABLE -#endif - -#define not_yet - -#define SPI_VINETIC - -/* - * Deal with CONFIG_MODVERSIONS - */ -#if CONFIG_MODVERSIONS==1 -# include -#endif - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Schoenenborn"); -MODULE_DESCRIPTION("IFX SSC driver"); -MODULE_SUPPORTED_DEVICE("ifx_ssc"); -MODULE_PARM(maj, "i"); -MODULE_PARM_DESC(maj, "Major device number"); - -/* allow the user to set the major device number */ -static int maj = 0; - - -/* - * This is the per-channel data structure containing pointers, flags - * and variables for the port. This driver supports a maximum of PORT_CNT. - * isp is allocated in ifx_ssc_init() based on the chip version. - */ -static struct ifx_ssc_port *isp; - -/* prototypes for fops */ -static ssize_t ifx_ssc_read(struct file *, char *, size_t, loff_t *); -static ssize_t ifx_ssc_write(struct file *, const char *, size_t, loff_t *); -//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *); -int ifx_ssc_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -int ifx_ssc_open(struct inode *, struct file *); -int ifx_ssc_close(struct inode *, struct file *); - -/* other forward declarations */ -static unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info); -static void ifx_ssc_rx_int(int, void *, struct pt_regs *); -static void ifx_ssc_tx_int(int, void *, struct pt_regs *); -static void ifx_ssc_err_int(int, void *, struct pt_regs *); -#ifdef SSC_FRAME_INT_ENABLE -static void ifx_ssc_frm_int(int, void *, struct pt_regs *); -#endif -static void tx_int(struct ifx_ssc_port *); -static int ifx_ssc1_read_proc(char *, char **, off_t, int, int *, void *); -static void ifx_gpio_init(void); -/************************************************************************ - * Function declaration - ************************************************************************/ -//interrupt.c -extern unsigned int amazon_get_fpi_hz(void); -extern void disable_amazon_irq(unsigned int irq_nr); -extern void enable_amazon_irq(unsigned int irq_nr); -extern void mask_and_ack_amazon_irq(unsigned int irq_nr); - - -/*****************************************************************/ -typedef struct { - int (*request)(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long irqflags, - const char * devname, - void *dev_id); - void (*free)(unsigned int irq, void *dev_id); - void (*enable)(unsigned int irq); - void (*disable)(unsigned int irq); - void (*clear)(unsigned int irq); -} ifx_int_wrapper_t; - -static ifx_int_wrapper_t ifx_int_wrapper = { - request: request_irq, // IM action: enable int - free: free_irq, // IM action: disable int - enable: enable_amazon_irq, - disable: disable_amazon_irq, - clear: mask_and_ack_amazon_irq, - //end: -}; - -/* Fops-struct */ -static struct file_operations ifx_ssc_fops = { - owner: THIS_MODULE, - read: ifx_ssc_read, /* read */ - write: ifx_ssc_write, /* write */ -// poll: ifx_ssc_poll, /* poll */ - ioctl: ifx_ssc_ioctl, /* ioctl */ - open: ifx_ssc_open, /* open */ - release: ifx_ssc_close, /* release */ -}; - - -static inline unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info) -{ // ATTENTION: This function assumes that the CLC register is set with the - // appropriate value for RMC. - unsigned int rmc; - - rmc = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CLC) & - IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET; - if (rmc == 0){ - printk("ifx_ssc_get_kernel_clk rmc==0 \n"); - return (0); - } - return (amazon_get_fpi_hz() / rmc); -} - -#ifndef not_yet -#ifdef IFX_SSC_INT_USE_BH -/* - * This routine is used by the interrupt handler to schedule - * processing in the software interrupt portion of the driver - * (also known as the "bottom half"). This can be called any - * number of times for any channel without harm. - */ -static inline void -ifx_ssc_sched_event(struct ifx_ssc_port *info, int event) -{ - info->event |= 1 << event; /* remember what kind of event and who */ - queue_task(&info->tqueue, &tq_cyclades); /* it belongs to */ - mark_bh(CYCLADES_BH); /* then trigger event */ -} /* ifx_ssc_sched_event */ - - -/* - * This routine is used to handle the "bottom half" processing for the - * serial driver, known also the "software interrupt" processing. - * This processing is done at the kernel interrupt level, after the - * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This - * is where time-consuming activities which can not be done in the - * interrupt driver proper are done; the interrupt driver schedules - * them using ifx_ssc_sched_event(), and they get done here. - * - * This is done through one level of indirection--the task queue. - * When a hardware interrupt service routine wants service by the - * driver's bottom half, it enqueues the appropriate tq_struct (one - * per port) to the tq_cyclades work queue and sets a request flag - * via mark_bh for processing that queue. When the time is right, - * do_ifx_ssc_bh is called (because of the mark_bh) and it requests - * that the work queue be processed. - * - * Although this may seem unwieldy, it gives the system a way to - * pass an argument (in this case the pointer to the ifx_ssc_port - * structure) to the bottom half of the driver. Previous kernels - * had to poll every port to see if that port needed servicing. - */ -static void -do_ifx_ssc_bh(void) -{ - run_task_queue(&tq_cyclades); -} /* do_ifx_ssc_bh */ - -static void -do_softint(void *private_) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_; - - if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - info->flags &= ~(ASYNC_NORMAL_ACTIVE| - ASYNC_CALLOUT_ACTIVE); - } - if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->open_wait); - } - if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) { - wake_up_interruptible(&info->delta_msr_wait); - } - if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { - wake_up_interruptible(&tty->write_wait); - } -#ifdef Z_WAKE - if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) { - wake_up_interruptible(&info->shutdown_wait); - } -#endif -} /* do_softint */ -#endif /* IFX_SSC_INT_USE_BH */ -#endif // not_yet - -inline static void -rx_int(struct ifx_ssc_port *info) -{ - int fifo_fill_lev, bytes_in_buf, i; - unsigned long tmp_val; - unsigned long *tmp_ptr; - unsigned int rx_valid_cnt; - /* number of words waiting in the RX FIFO */ - fifo_fill_lev = (READ_PERIPHERAL_REGISTER(info->mapbase + - IFX_SSC_FSTAT) & - IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >> - IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET; - // Note: There are always 32 bits in a fifo-entry except for the last - // word of a contigous transfer block and except for not in rx-only - // mode and CON.ENBV set. But for this case it should be a convention - // in software which helps: - // In tx or rx/tx mode all transfers from the buffer to the FIFO are - // 32-bit wide, except for the last three bytes, which could be a - // combination of 16- and 8-bit access. - // => The whole block is received as 32-bit words as a contigous stream, - // even if there was a gap in tx which has the fifo run out of data! - // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)! - - /* free space in the RX buffer */ - bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr; - // transfer with 32 bits per entry - while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) { - tmp_ptr = (unsigned long *)info->rxbuf_ptr; - *tmp_ptr = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB); - info->rxbuf_ptr += 4; - info->stats.rxBytes += 4; - fifo_fill_lev --; - bytes_in_buf -= 4; - } // while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) - // now do the rest as mentioned in STATE.RXBV - while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) { - rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & - IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> - IFX_SSC_STATE_RX_BYTE_VALID_OFFSET; - if (rx_valid_cnt == 0) break; - if (rx_valid_cnt > bytes_in_buf) { - // ### TO DO: warning message: not block aligned data, other data - // in this entry will be lost - rx_valid_cnt = bytes_in_buf; - } - tmp_val = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB); - - for (i=0; irxbuf_ptr = (tmp_val >> ( 8 * (rx_valid_cnt - i-1))) & 0xff; -/* - *info->rxbuf_ptr = tmp_val & 0xff; - tmp_val >>= 8; -*/ - bytes_in_buf--; - - - info->rxbuf_ptr++; - } - info->stats.rxBytes += rx_valid_cnt; - } // while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) - - // check if transfer is complete - if (info->rxbuf_ptr >= info->rxbuf_end) { - ifx_int_wrapper.disable(info->rxirq); - /* wakeup any processes waiting in read() */ - wake_up_interruptible(&info->rwait); - /* and in poll() */ - //wake_up_interruptible(&info->pwait); - } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) && - (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) == 0)) { - // if buffer not filled completely and rx request done initiate new transfer -/* - if (info->rxbuf_end - info->rxbuf_ptr < 65536) -*/ - if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER((info->rxbuf_end - info->rxbuf_ptr) << - IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - } -} // rx_int - -inline static void -tx_int(struct ifx_ssc_port *info) -{ - - int fifo_space, fill, i; - fifo_space = ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_ID) & - IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - - ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_FSTAT) & - IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >> - IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET); - - if (fifo_space == 0) - return; - - fill = info->txbuf_end - info->txbuf_ptr; - - if (fill > fifo_space * 4) - fill = fifo_space * 4; - - for (i = 0; i < fill / 4; i++) { - // at first 32 bit access - WRITE_PERIPHERAL_REGISTER(*(UINT32 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr += 4; - } - - fifo_space -= fill / 4; - info->stats.txBytes += fill & ~0x3; - fill &= 0x3; - if ((fifo_space > 0) & (fill > 1)) { - // trailing 16 bit access - WRITE_PERIPHERAL_REGISTER_16(*(UINT16 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr += 2; - info->stats.txBytes += 2; - fifo_space --; -/* added by bingtao */ - fill -=2; - } - if ((fifo_space > 0) & (fill > 0)) { - // trailing 8 bit access - WRITE_PERIPHERAL_REGISTER_8(*(UINT8 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); - info->txbuf_ptr ++; - info->stats.txBytes ++; -/* - fifo_space --; -*/ - } - - // check if transmission complete - if (info->txbuf_ptr >= info->txbuf_end) { - ifx_int_wrapper.disable(info->txirq); - kfree(info->txbuf); - info->txbuf = NULL; - /* wake up any process waiting in poll() */ - //wake_up_interruptible(&info->pwait); - } - -} // tx_int - -static void -ifx_ssc_rx_int(int irq, void *dev_id, struct pt_regs *regs) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; - //WRITE_PERIPHERAL_REGISTER(IFX_SSC_R_BIT, info->mapbase + IFX_SSC_IRN_CR); - rx_int(info); -} - -static void -ifx_ssc_tx_int(int irq, void *dev_id, struct pt_regs *regs) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; - //WRITE_PERIPHERAL_REGISTER(IFX_SSC_T_BIT, info->mapbase + IFX_SSC_IRN_CR); - tx_int(info); -} - -static void -ifx_ssc_err_int(int irq, void *dev_id, struct pt_regs *regs) -{ - struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; - unsigned int state; - unsigned int write_back = 0; - unsigned long flags; - - - local_irq_save(flags); - state = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE); - - if ((state & IFX_SSC_STATE_RX_UFL) != 0) { - info->stats.rxUnErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR; - } - if ((state & IFX_SSC_STATE_RX_OFL) != 0) { - info->stats.rxOvErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR; - } - if ((state & IFX_SSC_STATE_TX_OFL) != 0) { - info->stats.txOvErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR; - } - if ((state & IFX_SSC_STATE_TX_UFL) != 0) { - info->stats.txUnErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR; - } -// if ((state & IFX_SSC_STATE_ABORT_ERR) != 0) { -// info->stats.abortErr++; -// write_back |= IFX_SSC_WHBSTATE_CLR_ABORT_ERROR; -// } - if ((state & IFX_SSC_STATE_MODE_ERR) != 0) { - info->stats.modeErr++; - write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR; - } - - if (write_back) - WRITE_PERIPHERAL_REGISTER(write_back, - info->mapbase + IFX_SSC_WHBSTATE); - - local_irq_restore(flags); -} - -#ifdef SSC_FRAME_INT_ENABLE -static void -ifx_ssc_frm_int(int irq, void *dev_id, struct pt_regs *regs) -{ - // ### TO DO: wake up framing wait-queue in conjunction with batch execution -} -#endif - -static void -ifx_ssc_abort(struct ifx_ssc_port *info) -{ - unsigned long flags; - bool enabled; - - local_irq_save(flags); - - // disable all int's - ifx_int_wrapper.disable(info->rxirq); - ifx_int_wrapper.disable(info->txirq); - ifx_int_wrapper.disable(info->errirq); -/* - ifx_int_wrapper.disable(info->frmirq); -*/ - local_irq_restore(flags); - - // disable SSC (also aborts a receive request!) - // ### TO DO: Perhaps it's better to abort after the receiption of a - // complete word. The disable cuts the transmission immediatly and - // releases the chip selects. This could result in unpredictable - // behavior of connected external devices! - enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_IS_ENABLED) != 0; - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - - // flush fifos - WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, - info->mapbase + IFX_SSC_TXFCON); - WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, - info->mapbase + IFX_SSC_RXFCON); - - // free txbuf - if (info->txbuf != NULL) { - kfree(info->txbuf); - info->txbuf = NULL; - } - - // wakeup read process - if (info->rxbuf != NULL) - wake_up_interruptible(&info->rwait); - - // clear pending int's - ifx_int_wrapper.clear(info->rxirq); - ifx_int_wrapper.clear(info->txirq); - ifx_int_wrapper.clear(info->errirq); -/* - ifx_int_wrapper.clear(info->frmirq); -*/ - - // clear error flags - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR, - info->mapbase + IFX_SSC_WHBSTATE); - - //printk("IFX SSC%d: Transmission aborted\n", info->port_nr); - // enable SSC - if (enabled) - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - -} // ifx_ssc_abort - - -/* - * This routine is called whenever a port is opened. It enforces - * exclusive opening of a port and enables interrupts, etc. - */ -int -ifx_ssc_open(struct inode *inode, struct file * filp) -{ - struct ifx_ssc_port *info; - int line; - int from_kernel = 0; - - if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) { - from_kernel = 1; - line = (int)inode; - } - else { - line = MINOR(filp->f_dentry->d_inode->i_rdev); - filp->f_op = &ifx_ssc_fops; - } - - /* don't open more minor devices than we can support */ - if (line < 0 || line >= PORT_CNT) - return -ENXIO; - - info = &isp[line]; - - /* exclusive open */ - if (info->port_is_open != 0) - return -EBUSY; - info->port_is_open++; - - ifx_int_wrapper.disable(info->rxirq); - ifx_int_wrapper.disable(info->txirq); - ifx_int_wrapper.disable(info->errirq); -/* - ifx_int_wrapper.disable(info->frmirq); -*/ - - /* Flush and enable TX/RX FIFO */ - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_FLUSH | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_TXFCON); - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_FLUSH | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_RXFCON); - - - /* logically flush the software FIFOs */ - info->rxbuf_ptr = 0; - info->txbuf_ptr = 0; - - /* clear all error bits */ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR, - info->mapbase + IFX_SSC_WHBSTATE); - - // clear pending interrupts - ifx_int_wrapper.clear(info->rxirq); - ifx_int_wrapper.clear(info->txirq); - ifx_int_wrapper.clear(info->errirq); -/* - ifx_int_wrapper.clear(info->frmirq); -*/ - - // enable SSC - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - MOD_INC_USE_COUNT; - - return 0; -} /* ifx_ssc_open */ -EXPORT_SYMBOL(ifx_ssc_open); - -/* - * This routine is called when a particular device is closed. - */ -int -ifx_ssc_close(struct inode *inode, struct file *filp) -{ - struct ifx_ssc_port *info; - int idx; - - if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) - idx = (int)inode; - else - idx = MINOR(filp->f_dentry->d_inode->i_rdev); - - if (idx < 0 || idx >= PORT_CNT) - return -ENXIO; - - info = &isp[idx]; - if (!info) - return -ENXIO; - - // disable SSC - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - // call abort function to disable int's, flush fifos... - ifx_ssc_abort(info); - - info->port_is_open --; - MOD_DEC_USE_COUNT; - - return 0; -} /* ifx_ssc_close */ -EXPORT_SYMBOL(ifx_ssc_close); - -/* added by bingtao */ -/* helper routine to handle reads from the kernel or user-space */ -/* info->rxbuf : never kfree and contains valid data */ -/* should be points to NULL after copying data !!! */ -static ssize_t -ifx_ssc_read_helper_poll(struct ifx_ssc_port *info, char *buf, size_t len, - int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - local_irq_save(flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - local_irq_restore(flags); -/* Vinetic driver always works in IFX_SSC_MODE_RXTX */ -/* TXRX in poll mode */ - while (info->rxbuf_ptr < info->rxbuf_end){ -/* This is the key point, if you don't check this condition - kfree (NULL) will happen - because tx only need write into FIFO, it's much fast than rx - So when rx still waiting , tx already finish and release buf -*/ - if (info->txbuf_ptr < info->txbuf_end) { - tx_int(info); - } - - rx_int(info); - }; - - ret_val = info->rxbuf_ptr - info->rxbuf; - return (ret_val); -} // ifx_ssc_read_helper_poll - -/* helper routine to handle reads from the kernel or user-space */ -/* info->rx_buf : never kfree and contains valid data */ -/* should be points to NULL after copying data !!! */ -static ssize_t -ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len, - int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - DECLARE_WAITQUEUE(wait, current); - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - local_irq_save(flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { - if ((info->txbuf == NULL) || - (info->txbuf != info->txbuf_ptr) || - (info->txbuf_end != len + info->txbuf)) { - local_irq_restore(flags); - printk("IFX SSC - %s: write must be called before calling " - "read in combined RX/TX!\n", __FUNCTION__); - return -EFAULT; - } - local_irq_restore(flags); - /* should enable tx, right?*/ - tx_int(info); - if (info->txbuf_ptr < info->txbuf_end){ - ifx_int_wrapper.enable(info->txirq); - } - - ifx_int_wrapper.enable(info->rxirq); - } else { // rx mode - local_irq_restore(flags); - if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & - IFX_SSC_RXCNT_TODO_MASK) - return -EBUSY; - ifx_int_wrapper.enable(info->rxirq); - // rx request limited to ' bytes -/* - if (len < 65536) -*/ - if (len < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - } - - __add_wait_queue(&info->rwait, &wait); - set_current_state(TASK_INTERRUPTIBLE); - // wakeup done in rx_int - - do { - local_irq_save(flags); - if (info->rxbuf_ptr >= info->rxbuf_end) - break; - local_irq_restore(flags); - -// if (filp->f_flags & O_NONBLOCK) -// { -// N = -EAGAIN; -// goto out; -// } - if (signal_pending(current)) { - ret_val = -ERESTARTSYS; - goto out; - } - schedule(); - } while (1); - - ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len - local_irq_restore(flags); - - out: - current->state = TASK_RUNNING; - __remove_wait_queue(&info->rwait, &wait); - return (ret_val); -} // ifx_ssc_read_helper - - -#if 0 -/* helper routine to handle reads from the kernel or user-space */ -/* appropriate in interrupt context */ -static ssize_t -ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len, - int from_kernel) -{ - ssize_t ret_val; - unsigned long flags; - DECLARE_WAITQUEUE(wait, current); - - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) - return -EFAULT; - local_irq_save(flags); - info->rxbuf_ptr = info->rxbuf; - info->rxbuf_end = info->rxbuf + len; - if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { - if ((info->txbuf == NULL) || - (info->txbuf != info->txbuf_ptr) || - (info->txbuf_end != len + info->txbuf)) { - local_irq_restore(flags); - printk("IFX SSC - %s: write must be called before calling " - "read in combined RX/TX!\n", __FUNCTION__); - return -EFAULT; - } - local_irq_restore(flags); - /* should enable tx, right?*/ - tx_int(info); - if (!in_irq()){ - if (info->txbuf_ptr < info->txbuf_end){ - ifx_int_wrapper.enable(info->txirq); - } - ifx_int_wrapper.enable(info->rxirq); - } - } else { // rx mode - local_irq_restore(flags); - if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & - IFX_SSC_RXCNT_TODO_MASK) - return -EBUSY; - if (!in_irq()){ - ifx_int_wrapper.enable(info->rxirq); - } - - if (len < IFX_SSC_RXREQ_BLOCK_SIZE) - WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - else - WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, - info->mapbase + IFX_SSC_RXREQ); - } - if (in_irq()){ - do { - rx_int(info); - if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { - tx_int(info); - } - - if (info->rxbuf_ptr >= info->rxbuf_end) - break; - } while (1); - ret_val = info->rxbuf_ptr - info->rxbuf; - }else{ - __add_wait_queue(&info->rwait, &wait); - set_current_state(TASK_INTERRUPTIBLE); - // wakeup done in rx_int - - do { - local_irq_save(flags); - if (info->rxbuf_ptr >= info->rxbuf_end) - break; - local_irq_restore(flags); - - if (signal_pending(current)) { - ret_val = -ERESTARTSYS; - goto out; - } - schedule(); - } while (1); - - ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len - local_irq_restore(flags); - - out: - current->state = TASK_RUNNING; - __remove_wait_queue(&info->rwait, &wait); - } - return (ret_val); -} // ifx_ssc_read_helper -#endif - -/* helper routine to handle writes to the kernel or user-space */ -/* info->txbuf has two cases: - * 1) return value < 0 (-EFAULT), not touched at all - * 2) kfree and points to NULL in interrupt routine (but maybe later ) - */ -static ssize_t -ifx_ssc_write_helper(struct ifx_ssc_port *info, const char *buf, - size_t len, int from_kernel) -{ - // check if in tx or tx/rx mode - if (info->opts.modeRxTx == IFX_SSC_MODE_RX) - return -EFAULT; - - info->txbuf_ptr = info->txbuf; - info->txbuf_end = len + info->txbuf; - /* start the transmission (not in rx/tx, see read helper) */ - if (info->opts.modeRxTx == IFX_SSC_MODE_TX) { - tx_int(info); - if (info->txbuf_ptr < info->txbuf_end){ - ifx_int_wrapper.enable(info->txirq); - } - } - //local_irq_restore(flags); - return len; -} - -/* - * kernel interfaces for read and write. - * The caller must set port to: n for SSC with n=m-1 (e.g. n=0 for SSC1) - */ -ssize_t -ifx_ssc_kread(int port, char *kbuf, size_t len) -{ - struct ifx_ssc_port *info; - ssize_t ret_val; - - if (port < 0 || port >= PORT_CNT) - return -ENXIO; - - if (len == 0) - return 0; - - info = &isp[port]; - - // check if reception in progress - if (info->rxbuf != NULL){ - printk("SSC device busy\n"); - return -EBUSY; - } - - info->rxbuf = kbuf; - if (info->rxbuf == NULL){ - printk("SSC device error\n"); - return -EINVAL; - } - -/* changed by bingtao */ - /* change by TaiCheng */ - //if (!in_irq()){ - if (0){ - ret_val = ifx_ssc_read_helper(info, kbuf, len, 1); - }else{ - ret_val = ifx_ssc_read_helper_poll(info, kbuf, len, 1); - }; - info->rxbuf = NULL; - - // ### TO DO: perhaps warn if ret_val != len - ifx_int_wrapper.disable(info->rxirq); - - return (ret_val); -} // ifx_ssc_kread -EXPORT_SYMBOL(ifx_ssc_kread); - -ssize_t -ifx_ssc_kwrite(int port, const char *kbuf, size_t len) -{ - struct ifx_ssc_port *info; - ssize_t ret_val; - - if (port < 0 || port >= PORT_CNT) - return -ENXIO; - - if (len == 0) - return 0; - - info = &isp[port]; - - // check if transmission in progress - if (info->txbuf != NULL) - return -EBUSY; - info->txbuf = (char *)kbuf; - - ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 1); - if (ret_val < 0){ - info->txbuf = NULL; - } - return ret_val; -} -EXPORT_SYMBOL(ifx_ssc_kwrite); - - -/* - * user interfaces to read and write - */ -static ssize_t -ifx_ssc_read(struct file *filp, char *ubuf, size_t len, loff_t *off) -{ - ssize_t ret_val; - int idx; - struct ifx_ssc_port *info; - -/* - if (len == 0) - return (0); -*/ - idx = MINOR(filp->f_dentry->d_inode->i_rdev); - info = &isp[idx]; - - // check if reception in progress - if (info->rxbuf != NULL) - return -EBUSY; - - info->rxbuf = kmalloc(len+ 3, GFP_KERNEL); - if (info->rxbuf == NULL) - return -ENOMEM; - - ret_val = ifx_ssc_read_helper(info, info->rxbuf, len, 0); - // ### TO DO: perhaps warn if ret_val != len - if (copy_to_user((void*)ubuf, info->rxbuf, ret_val) != 0) - ret_val = -EFAULT; - - ifx_int_wrapper.disable(info->rxirq); - - kfree(info->rxbuf); - info->rxbuf = NULL; - return (ret_val); -} // ifx_ssc_read - -/* - * As many bytes as we have free space for are copied from the user - * into txbuf and the actual byte count is returned. The transmission is - * always kicked off by calling the appropriate TX routine. - */ -static ssize_t -ifx_ssc_write(struct file *filp, const char *ubuf, size_t len, loff_t *off) -{ - int idx; - struct ifx_ssc_port *info; - int ret_val; - - if (len == 0) - return (0); - - idx = MINOR(filp->f_dentry->d_inode->i_rdev); - info = &isp[idx]; - - // check if transmission in progress - if (info->txbuf != NULL) - return -EBUSY; - - info->txbuf = kmalloc(len+ 3, GFP_KERNEL); - if (info->txbuf == NULL) - return -ENOMEM; - - ret_val = copy_from_user(info->txbuf, ubuf, len); - if (ret_val == 0) - ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 0); - else - ret_val = -EFAULT; - if (ret_val < 0) { - kfree(info->txbuf); // otherwise will be done in ISR - info->txbuf = NULL; - } - return (ret_val); -} /* ifx_ssc_write */ - - -/* - * ------------------------------------------------------------ - * ifx_ssc_ioctl() and friends - * ------------------------------------------------------------ - */ - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_frm_status_get - LONG-NAME : framing status get - PURPOSE : Get the actual status of the framing. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : pointer to a structure ifx_ssc_frm_status which holds busy and - count values. - - REMARKS : Returns a register value independent of framing is enabled or - not! Changes structure inside of info, so the return value isn't - needed at all, but could be used for simple access. ------------------------------------------------------------------------------*/ -static struct ifx_ssc_frm_status * -ifx_ssc_frm_status_get(struct ifx_ssc_port *info) -{ - unsigned long tmp; - - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFSTAT); - info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0; - info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0; - info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK) - >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET; - info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) - >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET; - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON); - info->frm_status.EnIntAfterData = - (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0; - info->frm_status.EnIntAfterPause = - (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0; - return (&info->frm_status); -} // ifx_ssc_frm_status_get - - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_frm_control_get - LONG-NAME : framing control get - PURPOSE : Get the actual control values of the framing. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits - and count reload values. - - REMARKS : Changes structure inside of info, so the return value isn't - needed at all, but could be used for simple access. ------------------------------------------------------------------------------*/ -static struct ifx_ssc_frm_opts * -ifx_ssc_frm_control_get(struct ifx_ssc_port *info) -{ - unsigned long tmp; - - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON); - info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0; - info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK) - >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET; - info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) - >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; - info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK) - >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET; - info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK) - >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; - info->frm_opts.StopAfterPause = - (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0; - return (&info->frm_opts); -} // ifx_ssc_frm_control_get - - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_frm_control_set - LONG-NAME : framing control set - PURPOSE : Set the actual control values of the framing. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits - and count reload values. - - REMARKS : ------------------------------------------------------------------------------*/ -static int -ifx_ssc_frm_control_set(struct ifx_ssc_port *info) -{ - unsigned long tmp; - - // check parameters - if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) || - (info->frm_opts.DataLength < 1) || - (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) || - (info->frm_opts.PauseLength < 1) || - ((info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> - IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) != 0 ) || - ((info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> - IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)) != 0 )) - return -EINVAL; - - // read interrupt bits (they're not changed here) - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON) & - (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | - IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE); - - // set all values with respect to it's bit position (for data and pause - // length set N-1) - tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET; - tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; - tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET; - tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; - tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE; - tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE; - - WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON); - - return 0; -} // ifx_ssc_frm_control_set - - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_rxtx_mode_set - LONG-NAME : rxtx mode set - PURPOSE : Set the transmission mode. - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : Returns error code - - REMARKS : Assumes that SSC not used (SSC disabled, device not opened yet - or just closed) ------------------------------------------------------------------------------*/ -static int -ifx_ssc_rxtx_mode_set(struct ifx_ssc_port *info, unsigned int val) -{ - unsigned long tmp; - - // check parameters - if (!(info) || (val & ~(IFX_SSC_MODE_MASK))) - return -EINVAL; - /*check BUSY and RXCNT*/ - if ( READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY - ||READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK) - return -EBUSY; - // modify - tmp = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) & - ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val); - WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_CON); - info->opts.modeRxTx = val; -/* - printk(KERN_DEBUG "IFX SSC%d: Setting mode to %s%s\n", - info->port_nr, - ((val & IFX_SSC_CON_RX_OFF) == 0) ? "rx ":"", - ((val & IFX_SSC_CON_TX_OFF) == 0) ? "tx":""); -*/ - return 0; -} // ifx_ssc_rxtx_mode_set - -void ifx_gpio_init(void) -{ - u32 temp; -/* set gpio pin p0.10(SPI_DIN) p0.11(SPI_DOUT) p0.12(SPI_CLK) p0.13(SPI_CS2) direction */ - temp = *(AMAZON_GPIO_P0_DIR) ; - temp &= 0xFFFFFBFF; - temp |= 0x3800; - *(AMAZON_GPIO_P0_DIR) = temp; -/* set port 0 alternate select register 0 */ - temp = *(AMAZON_GPIO_P0_ALTSEL0) ; - temp &= 0xFFFFC3FF; - temp |= 0x00001c00; - *(AMAZON_GPIO_P0_ALTSEL0) = temp; - -/* set port 0 alternate select register 1 */ - temp = *(AMAZON_GPIO_P0_ALTSEL1) ; - temp &= 0xFFFFC3FF; - temp |= 0x00002000; - *(AMAZON_GPIO_P0_ALTSEL1) = temp; - -/* set port 0 open drain mode register */ - temp = *(AMAZON_GPIO_P0_OD); - temp |= 0x00003800; /* set output pin normal mode */ - *(AMAZON_GPIO_P0_OD)= temp; -} - -/* - * This routine intializes the SSC appropriately depending - * on slave/master and full-/half-duplex mode. - * It assumes that the SSC is disabled and the fifo's and buffers - * are flushes later on. - */ -static int -ifx_ssc_sethwopts(struct ifx_ssc_port *info) -{ - unsigned long flags, bits; - struct ifx_ssc_hwopts *opts = &info->opts; - - /* sanity checks */ - if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) || - (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) { - printk("%s: sanity check failed\n", __FUNCTION__); - return -EINVAL; - } - bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET; - bits |= IFX_SSC_CON_ENABLE_BYTE_VALID; -// if (opts->abortErrDetect) -// bits |= IFX_SSC_CON_ABORT_ERR_CHECK; - if (opts->rxOvErrDetect) - bits |= IFX_SSC_CON_RX_OFL_CHECK; - if (opts->rxUndErrDetect) - bits |= IFX_SSC_CON_RX_UFL_CHECK; - if (opts->txOvErrDetect) - bits |= IFX_SSC_CON_TX_OFL_CHECK; - if (opts->txUndErrDetect) - bits |= IFX_SSC_CON_TX_UFL_CHECK; - if (opts->loopBack) - bits |= IFX_SSC_CON_LOOPBACK_MODE; - if (opts->echoMode) - bits |= IFX_SSC_CON_ECHO_MODE_ON; - if (opts->headingControl) - bits |= IFX_SSC_CON_MSB_FIRST; - if (opts->clockPhase) - bits |= IFX_SSC_CON_LATCH_THEN_SHIFT; - if (opts->clockPolarity) - bits |= IFX_SSC_CON_CLOCK_FALL; - switch (opts->modeRxTx) { - case IFX_SSC_MODE_TX: - bits |= IFX_SSC_CON_RX_OFF; - break; - case IFX_SSC_MODE_RX: - bits |= IFX_SSC_CON_TX_OFF; - break; - } // switch (opts->modeRxT) - local_irq_save(flags); - WRITE_PERIPHERAL_REGISTER(bits, info->mapbase + IFX_SSC_CON); - WRITE_PERIPHERAL_REGISTER((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) | - (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), - info->mapbase + IFX_SSC_GPOCON); - //master mode - if (opts->masterSelect){ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE); - }else{ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE); - } - // init serial framing - WRITE_PERIPHERAL_REGISTER(0, info->mapbase + IFX_SSC_SFCON); - /* set up the port pins */ - //check for general requirements to switch (external) pad/pin characteristics - ifx_gpio_init(); - local_irq_restore(flags); - - return 0; -} // ifx_ssc_sethwopts - -static int -ifx_ssc_set_baud(struct ifx_ssc_port *info, unsigned int baud) -{ - unsigned int ifx_ssc_clock; - unsigned int br; - unsigned long flags; - bool enabled; - - ifx_ssc_clock = ifx_ssc_get_kernel_clk(info); - if (ifx_ssc_clock ==0) - return -EINVAL; - - local_irq_save(flags); - /* have to disable the SSC to set the baudrate */ - enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_IS_ENABLED) != 0; - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - // compute divider - br = ((ifx_ssc_clock >> 1)/baud) - 1; - asm("SYNC"); - if (br > 0xffff || - ((br == 0) && - ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & - IFX_SSC_STATE_IS_MASTER) == 0))){ - local_irq_restore(flags); - printk("%s: illegal baudrate %u\n", __FUNCTION__, baud); - return -EINVAL; - } - WRITE_PERIPHERAL_REGISTER(br, info->mapbase + IFX_SSC_BR); - if (enabled) - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - local_irq_restore(flags); - return 0; -} // ifx_ssc_set_baud - -static int -ifx_ssc_hwinit(struct ifx_ssc_port *info) -{ - unsigned long flags; - bool enabled; - - /* have to disable the SSC */ - enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_IS_ENABLED) != 0; - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - - if (ifx_ssc_sethwopts(info) < 0) - { - printk("%s: setting the hardware options failed\n", - __FUNCTION__); - return -EINVAL; - } - - if (ifx_ssc_set_baud(info, info->baud) < 0) { - printk("%s: setting the baud rate failed\n", __FUNCTION__); - return -EINVAL; - } - local_irq_save(flags); - /* TX FIFO */ - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_TXFCON); - /* RX FIFO */ - WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << - IFX_SSC_XFCON_ITL_OFFSET) | - IFX_SSC_XFCON_FIFO_ENABLE, - info->mapbase + IFX_SSC_RXFCON); - local_irq_restore(flags); - if (enabled) - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, - info->mapbase + IFX_SSC_WHBSTATE); - return 0; -} // ifx_ssc_hwinit - -/*----------------------------------------------------------------------------- - FUNC-NAME : ifx_ssc_batch_exec - LONG-NAME : - PURPOSE : - - PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. - - RESULT : Returns error code - - REMARKS : ------------------------------------------------------------------------------*/ -static int -ifx_ssc_batch_exec(struct ifx_ssc_port *info, struct ifx_ssc_batch_list *batch_anchor) -{ - // ### TO DO: implement user space batch execution - // first, copy the whole linked list from user to kernel space - // save some hardware options - // execute list - // restore hardware options if selected - return -EFAULT; -} // ifx_ssc_batch_exec - - -/* - * This routine allows the driver to implement device- - * specific ioctl's. If the ioctl number passed in cmd is - * not recognized by the driver, it should return ENOIOCTLCMD. - */ -int -ifx_ssc_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long data) -{ - struct ifx_ssc_port *info; - int line, ret_val = 0; - unsigned long flags; - unsigned long tmp; - int from_kernel = 0; - - if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) - { - from_kernel = 1; - line = (int)inode; - } - else - line = MINOR(filp->f_dentry->d_inode->i_rdev); - - /* don't use more minor devices than we can support */ - if (line < 0 || line >= PORT_CNT) - return -ENXIO; - - info = &isp[line]; - - switch (cmd) { - case IFX_SSC_STATS_READ: - /* data must be a pointer to a struct ifx_ssc_statistics */ - if (from_kernel) - memcpy((void *)data, (void *)&info->stats, - sizeof(struct ifx_ssc_statistics)); - else - if (copy_to_user((void *)data, - (void *)&info->stats, - sizeof(struct ifx_ssc_statistics))) - ret_val = -EFAULT; - break; - case IFX_SSC_STATS_RESET: - /* just resets the statistics counters */ - memset((void *)&info->stats, 0, sizeof(struct ifx_ssc_statistics)); - break; - case IFX_SSC_BAUD_SET: - /* if the buffers are not empty then the port is */ - /* busy and we shouldn't change things on-the-fly! */ - if (!info->txbuf || !info->rxbuf || - (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_BUSY)) { - ret_val = -EBUSY; - break; - } - /* misuse flags */ - if (from_kernel) - flags = *((unsigned long *)data); - else - if (copy_from_user((void *)&flags, - (void *)data, sizeof(flags))) - { - ret_val = -EFAULT; - break; - } - if (flags == 0) - { - ret_val = -EINVAL; - break; - } - if (ifx_ssc_set_baud(info, flags) < 0) - { - ret_val = -EINVAL; - break; - } - info->baud = flags; - break; - case IFX_SSC_BAUD_GET: - if (from_kernel) - *((unsigned int *)data) = info->baud; - else - if (copy_to_user((void *)data, - (void *)&info->baud, - sizeof(unsigned long))) - ret_val = -EFAULT; - break; - case IFX_SSC_RXTX_MODE_SET: - if (from_kernel) - tmp = *((unsigned long *)data); - else - if (copy_from_user((void *)&tmp, - (void *)data, sizeof(tmp))) { - ret_val = -EFAULT; - break; - } - ret_val = ifx_ssc_rxtx_mode_set(info, tmp); - break; - case IFX_SSC_RXTX_MODE_GET: - tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) & - (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)); - if (from_kernel) - *((unsigned int *)data) = tmp; - else - if (copy_to_user((void *)data, - (void *)&tmp, - sizeof(tmp))) - ret_val = -EFAULT; - break; - - case IFX_SSC_ABORT: - ifx_ssc_abort(info); - break; - - case IFX_SSC_GPO_OUT_SET: - if (from_kernel) - tmp = *((unsigned long *)data); - else - if (copy_from_user((void *)&tmp, - (void *)data, sizeof(tmp))) { - ret_val = -EFAULT; - break; - } - if (tmp > IFX_SSC_MAX_GPO_OUT) - ret_val = -EINVAL; - else - WRITE_PERIPHERAL_REGISTER - (1<<(tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS), - info->mapbase + IFX_SSC_WHBGPOSTAT); - break; - case IFX_SSC_GPO_OUT_CLR: - if (from_kernel) - tmp = *((unsigned long *)data); - else - if (copy_from_user((void *)&tmp, - (void *)data, sizeof(tmp))) { - ret_val = -EFAULT; - break; - } - if (tmp > IFX_SSC_MAX_GPO_OUT) - ret_val = -EINVAL; - else { - WRITE_PERIPHERAL_REGISTER - (1<<(tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS), - info->mapbase + IFX_SSC_WHBGPOSTAT); - } - break; - case IFX_SSC_GPO_OUT_GET: - tmp = READ_PERIPHERAL_REGISTER - (info->mapbase + IFX_SSC_GPOSTAT); - if (from_kernel) - *((unsigned int *)data) = tmp; - else - if (copy_to_user((void *)data, - (void *)&tmp, - sizeof(tmp))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_STATUS_GET: - ifx_ssc_frm_status_get(info); - if (from_kernel) - memcpy((void *)data, (void *)&info->frm_status, - sizeof(struct ifx_ssc_frm_status)); - else - if (copy_to_user((void *)data, - (void *)&info->frm_status, - sizeof(struct ifx_ssc_frm_status))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_CONTROL_GET: - ifx_ssc_frm_control_get(info); - if (from_kernel) - memcpy((void *)data, (void *)&info->frm_opts, - sizeof(struct ifx_ssc_frm_opts)); - else - if (copy_to_user((void *)data, - (void *)&info->frm_opts, - sizeof(struct ifx_ssc_frm_opts))) - ret_val = -EFAULT; - break; - case IFX_SSC_FRM_CONTROL_SET: - if (from_kernel) - memcpy((void *)&info->frm_opts, (void *)data, - sizeof(struct ifx_ssc_frm_opts)); - else - if (copy_to_user((void *)&info->frm_opts, - (void *)data, - sizeof(struct ifx_ssc_frm_opts))){ - ret_val = -EFAULT; - break; - } - ret_val = ifx_ssc_frm_control_set(info); - break; - case IFX_SSC_HWOPTS_SET: - /* data must be a pointer to a struct ifx_ssc_hwopts */ - /* if the buffers are not empty then the port is */ - /* busy and we shouldn't change things on-the-fly! */ - if (!info->txbuf || !info->rxbuf || - (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) - & IFX_SSC_STATE_BUSY)) { - ret_val = -EBUSY; - break; - } - if (from_kernel) - memcpy((void *)&info->opts, (void *)data, - sizeof(struct ifx_ssc_hwopts)); - else - if (copy_from_user((void *)&info->opts, - (void *)data, - sizeof(struct ifx_ssc_hwopts))) - { - ret_val = -EFAULT; - break; - } - if (ifx_ssc_hwinit(info) < 0) - { - ret_val = -EIO; - } - break; - case IFX_SSC_HWOPTS_GET: - /* data must be a pointer to a struct ifx_ssc_hwopts */ - if (from_kernel) - memcpy((void *)data, (void *)&info->opts, - sizeof(struct ifx_ssc_hwopts)); - else - if (copy_to_user((void *)data, - (void *)&info->opts, - sizeof(struct ifx_ssc_hwopts))) - ret_val = -EFAULT; - break; - default: - ret_val = -ENOIOCTLCMD; - } - - return ret_val; -} /* ifx_ssc_ioctl */ -EXPORT_SYMBOL(ifx_ssc_ioctl); - -///* the poll routine */ -//static unsigned int -//ifx_ssc_poll(struct file *filp, struct poll_table_struct *pts) -//{ -// int unit = MINOR(filp->f_dentry->d_inode->i_rdev); -// struct ifx_ssc_port *info; -// unsigned int mask = 0; -// int spc; -// -// info = &isp[unit]; -// -// /* add event to the wait queues */ -// /* DO NOT FORGET TO DO A WAKEUP ON THESE !!!! */ -// poll_wait(filp, &info->pwait, pts); -// -// /* are there bytes in the RX SW-FIFO? */ -// if (info->rxrp != info->rxwp) -// mask |= POLLIN | POLLRDNORM; -// -// /* free space in the TX SW-FIFO */ -// spc = info->txrp - info->txwp - 1; -// if (spc < 0) -// spc += TX_BUFSIZE; -//#ifdef IFX_SSC_USEDMA -// /* writing always works, except in the DMA case when all descriptors */ -// /* are used up */ -// if (unit == 1 && info->dma_freecnt == 0) -// spc = 0; -//#endif -// if (spc > 0) -// mask |= POLLOUT | POLLWRNORM; -// -// return (mask); -//} - -static int -ifx_ssc1_read_proc(char *page, char **start, off_t offset, int count, int *eof, void *data) -{ - int off = 0; - unsigned long flags; - - /* don't want any interrupts here */ - save_flags(flags); - cli(); - - - /* print statistics */ - off += sprintf(page+off, "Statistics for Infineon Synchronous Serial Controller SSC1\n"); - off += sprintf(page+off, "RX overflow errors %d\n", isp[0].stats.rxOvErr); - off += sprintf(page+off, "RX underflow errors %d\n", isp[0].stats.rxUnErr); - off += sprintf(page+off, "TX overflow errors %d\n", isp[0].stats.txOvErr); - off += sprintf(page+off, "TX underflow errors %d\n", isp[0].stats.txUnErr); - off += sprintf(page+off, "Abort errors %d\n", isp[0].stats.abortErr); - off += sprintf(page+off, "Mode errors %d\n", isp[0].stats.modeErr); - off += sprintf(page+off, "RX Bytes %d\n", isp[0].stats.rxBytes); - off += sprintf(page+off, "TX Bytes %d\n", isp[0].stats.txBytes); - - restore_flags (flags); /* XXXXX */ - *eof = 1; - return (off); -} - - -/* - * This routine prints out the appropriate serial driver version number - */ -static inline void -show_version(void) -{ -#if 0 - printk("Infineon Technologies Synchronous Serial Controller (SSC) driver\n" - " version %s - built %s %s\n", IFX_SSC_DRV_VERSION, __DATE__, __TIME__); -#endif -} /* show_version */ - - -/* - * Due to the fact that a port can be dynamically switched between slave - * and master mode using an IOCTL the hardware is not initialized here, - * but in ifx_ssc_hwinit() as a result of an IOCTL. - */ -int __init -ifx_ssc_init(void) -{ - struct ifx_ssc_port *info; - int i, nbytes; - unsigned long flags; - int ret_val; - - // ### TO DO: dynamic port count evaluation due to pin multiplexing - - ret_val = -ENOMEM; - nbytes = PORT_CNT * sizeof(struct ifx_ssc_port); - isp = (struct ifx_ssc_port *)kmalloc(nbytes, GFP_KERNEL); - if (isp == NULL) - { - printk("%s: no memory for isp\n", __FUNCTION__); - return (ret_val); - } - memset(isp, 0, nbytes); - - show_version(); - - /* register the device */ - ret_val = -ENXIO; -/* - i = maj; -*/ - if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0) - { - printk("Unable to register major %d for the Infineon SSC\n", maj); - if (maj == 0){ - goto errout; - } - else{ - maj = 0; - if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0) - { - printk("Unable to register major %d for the Infineon SSC\n", maj); - goto errout; - } - } - } - if (maj == 0) maj = i; - //printk("registered major %d for Infineon SSC\n", maj); - - /* set default values in ifx_ssc_port */ - for (i = 0; i < PORT_CNT; i++) { - info = &isp[i]; - info->port_nr = i; - /* default values for the HwOpts */ - info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT; - info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT; - info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT; - info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT; - info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT; - info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK; - info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE; - info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA; - info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY; - info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE; - info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL; - info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH; - info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX; - info->opts.gpoCs = IFX_SSC_DEF_GPO_CS; - info->opts.gpoInv = IFX_SSC_DEF_GPO_INV; - info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE; - info->baud = IFX_SSC_DEF_BAUDRATE; - info->rxbuf = NULL; - info->txbuf = NULL; - /* values specific to SSC1 */ - if (i == 0) { - info->mapbase = AMAZON_SSC_BASE_ADD_0; - // ### TO DO: power management - - // setting interrupt vectors - info->txirq = IFX_SSC_TIR; - info->rxirq = IFX_SSC_RIR; - info->errirq = IFX_SSC_EIR; -/* - info->frmirq = IFX_SSC_FIR; -*/ - } - /* activate SSC */ - /* CLC.DISS = 0 */ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC); - -// ### TO DO: multiple instances - - init_waitqueue_head(&info->rwait); - //init_waitqueue_head(&info->pwait); - - local_irq_save(flags); - - // init serial framing register - WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON); - - /* try to get the interrupts */ - // ### TO DO: interrupt handling with multiple instances - ret_val = ifx_int_wrapper.request(info->txirq, ifx_ssc_tx_int, - 0, "ifx_ssc_tx", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->txirq); - local_irq_restore(flags); - goto errout; - } - ret_val = ifx_int_wrapper.request(info->rxirq, ifx_ssc_rx_int, - 0, "ifx_ssc_rx", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->rxirq); - local_irq_restore(flags); - goto irqerr; - } - ret_val = ifx_int_wrapper.request(info->errirq, ifx_ssc_err_int, - 0, "ifx_ssc_err", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->errirq); - local_irq_restore(flags); - goto irqerr; - } -/* - ret_val = ifx_int_wrapper.request(info->frmirq, ifx_ssc_frm_int, - 0, "ifx_ssc_frm", info); - if (ret_val){ - printk("%s: unable to get irq %d\n", __FUNCTION__, - info->frmirq); - local_irq_restore(flags); - goto irqerr; - } - -*/ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN); - - local_irq_restore(flags); - } // for (i = 0; i < PORT_CNT; i++) - - /* init the SSCs with default values */ - for (i = 0; i < PORT_CNT; i++) - { - info = &isp[i]; - if (ifx_ssc_hwinit(info) < 0) - { - printk("%s: hardware init failed for port %d\n", - __FUNCTION__, i); - goto irqerr; - } - } - - /* register /proc read handler */ - // ### TO DO: multiple instances - /* for SSC1, which is always present */ - create_proc_read_entry("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL); - return 0; - -irqerr: - // ### TO DO: multiple instances - ifx_int_wrapper.free(isp[0].txirq,&isp[0]); - ifx_int_wrapper.free(isp[0].rxirq,&isp[0]); - ifx_int_wrapper.free(isp[0].errirq,&isp[0]); -/* - ifx_int_wrapper.free(isp[0].frmirq, &isp[0]); -*/ -errout: - /* free up any allocated memory in the error case */ - kfree(isp); - return (ret_val); -} /* ifx_ssc_init */ - - -void -ifx_ssc_cleanup_module(void) -{ - int i; - - /* free up any allocated memory */ - for (i = 0; i < PORT_CNT; i++) - { - /* disable the SSC */ - WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,isp[i].mapbase + IFX_SSC_WHBSTATE); - /* free the interrupts */ - ifx_int_wrapper.free(isp[i].txirq, &isp[i]); - ifx_int_wrapper.free(isp[i].rxirq, &isp[i]); - ifx_int_wrapper.free(isp[i].errirq, &isp[i]); -/* - ifx_int_wrapper.free(isp[i].frmirq, &isp[i]); - - if (isp[i].rxbuf != NULL) - kfree(isp[i].rxbuf); - if (isp[i].txbuf != NULL) - kfree(isp[i].txbuf); -*/ - } - kfree(isp); - /* unregister the device */ - if (unregister_chrdev(maj, "ssc")) - { - printk("Unable to unregister major %d for the SSC\n", maj); - } - /* delete /proc read handler */ - remove_proc_entry("driver/ssc1", NULL); - remove_proc_entry("driver/ssc2", NULL); -} /* ifx_ssc_cleanup_module */ - -module_exit(ifx_ssc_cleanup_module); - -/* Module entry-points */ -module_init(ifx_ssc_init); - -#ifndef MODULE -static int __init -ifx_ssc_set_maj(char *str) -{ - maj = simple_strtol(str, NULL, 0); - return 1; -} -__setup("ssc_maj=", ifx_ssc_set_maj); -#endif /* !MODULE */ - -#define AMAZON_SSC_EMSG(fmt,arg...) printk("%s: "fmt,__FUNCTION__, ##arg) -/* Brief: chip select enable - */ -inline int amazon_ssc_cs_low(u32 pin) -{ - int ret=0; - if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_CLR, (unsigned long)&pin))){ - AMAZON_SSC_EMSG("clear CS %d fails\n",pin); - } - wmb(); - return ret; -} -EXPORT_SYMBOL(amazon_ssc_cs_low); -/* Brief: chip select disable - */ -inline int amazon_ssc_cs_high(u32 pin) -{ - int ret=0; - if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_SET, (unsigned long)&pin))){ - AMAZON_SSC_EMSG("set CS %d fails\n", pin); - } - wmb(); - return ret; -} -EXPORT_SYMBOL(amazon_ssc_cs_high); -/* Brief: one SSC session - * Parameter: - * tx_buf - * tx_len - * rx_buf - * rx_len - * session_mode: IFX_SSC_MODE_RXTX or IFX_SSC_MODE_TX - * Return: >=0 number of bytes received (if rx_buf != 0) or transmitted - * <0 error code - * Description: - * 0. copy data to internal buffer - * 1. Write command - * 2a. If SSC_SESSION_MODE_TXONLY, read tx_len data - * 2b. If not Read back (tx_len + rx_len) data - * 3. copy internal buffer to rx buf if necessary - */ -static int ssc_session(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len) -{ - int ret=0; - - char * ssc_tx_buf=NULL; - char * ssc_rx_buf=NULL; - -// volatile char ssc_tx_buf[128]={0}; -// volatile char ssc_rx_buf[128]={0}; - - int eff_size=0; - u8 mode=0; - - if (tx_buf == NULL && tx_len ==0 && rx_buf == NULL && rx_len == 0){ - AMAZON_SSC_EMSG("invalid parameters\n"); - ret=-EINVAL; - goto ssc_session_exit; - }else if (tx_buf == NULL || tx_len == 0){ - if (rx_buf != NULL && rx_len != 0){ - mode = IFX_SSC_MODE_RX; - }else{ - AMAZON_SSC_EMSG("invalid parameters\n"); - ret=-EINVAL; - goto ssc_session_exit; - } - }else if (rx_buf == NULL || rx_len ==0){ - if (tx_buf != NULL && tx_len != 0){ - mode = IFX_SSC_MODE_TX; - }else{ - AMAZON_SSC_EMSG("invalid parameters\n"); - ret=-EINVAL; - goto ssc_session_exit; - } - }else{ - mode = IFX_SSC_MODE_RXTX; - } - - if (mode == IFX_SSC_MODE_RXTX){ - eff_size = tx_len + rx_len; - }else if (mode == IFX_SSC_MODE_RX){ - eff_size = rx_len; - }else{ - eff_size = tx_len; - } - - //4 bytes alignment, required by driver - /* change by TaiCheng */ - //if (in_irq()){ - if (1){ - ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC); - ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC); - }else{ - ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL); - ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL); - } - if (ssc_tx_buf == NULL || ssc_rx_buf == NULL){ - AMAZON_SSC_EMSG("no memory for size of %d\n", eff_size); - ret = -ENOMEM; - goto ssc_session_exit; - } - memset((void*)ssc_tx_buf, 0, eff_size); - memset((void*)ssc_rx_buf, 0, eff_size); - - if (tx_len>0){ - memcpy(ssc_tx_buf, tx_buf, tx_len); - } - - ret=ifx_ssc_kwrite(0, ssc_tx_buf, eff_size); - - if (ret > 0) { - ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite - } - - if ( ret != eff_size ){ - AMAZON_SSC_EMSG("ifx_ssc_write return %d\n",ret); - goto ssc_session_exit; - } - ret=ifx_ssc_kread(0, ssc_rx_buf,eff_size); - if ( ret != eff_size ){ - AMAZON_SSC_EMSG("ifx_ssc_read return %d\n",ret); - goto ssc_session_exit; - } - - memcpy(rx_buf, ssc_rx_buf+tx_len, rx_len); - - if (mode == IFX_SSC_MODE_TX) { - ret = tx_len; - }else{ - ret = rx_len; - } -ssc_session_exit: - - if (ssc_tx_buf != NULL) kfree(ssc_tx_buf); - if (ssc_rx_buf != NULL) kfree(ssc_rx_buf); - - if (ret<0) { - printk("ssc session fails\n"); - } - return ret; -} -/* Brief: TX-RX session - * Parameter: - * tx_buf - * tx_len - * rx_buf - * rx_len - * Return: >=0 number of bytes received - * <0 error code - * Description: - * 1. TX session - * 2. RX session - */ -int amazon_ssc_txrx(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len) -{ - return ssc_session(tx_buf,tx_len,rx_buf,rx_len); -} -EXPORT_SYMBOL(amazon_ssc_txrx); -/* Brief: TX only session - * Parameter: - * tx_buf - * tx_len - * Return: >=0 number of bytes transmitted - * <0 error code - */ -int amazon_ssc_tx(char * tx_buf, u32 tx_len) -{ - return ssc_session(tx_buf,tx_len,NULL,0); -} -EXPORT_SYMBOL(amazon_ssc_tx); -/* Brief: RX only session - * Parameter: - * rx_buf - * rx_len - * Return: >=0 number of bytes received - * <0 error code - */ -int amazon_ssc_rx(char * rx_buf, u32 rx_len) -{ - return ssc_session(NULL,0,rx_buf,rx_len); -} -EXPORT_SYMBOL(amazon_ssc_rx); - diff --git a/target/linux/amazon-2.6/files/drivers/char/watchdog/amazon_wdt.c b/target/linux/amazon-2.6/files/drivers/char/watchdog/amazon_wdt.c deleted file mode 100644 index 3c58d2fea8..0000000000 --- a/target/linux/amazon-2.6/files/drivers/char/watchdog/amazon_wdt.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright 2004 Wu Qi Ming - * Copyright (C) 2007 John Crispin - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRV_NAME "AMAZON WDT:" - -#undef AMAZON_WDT_DEBUG - -extern unsigned int amazon_get_fpi_hz(void); -static int amazon_wdt_isopen = 0; - -#ifdef AMAZON_WDT_DEBUG -static struct proc_dir_entry* amazon_wdt_dir; -#endif - -int wdt_enable(int timeout) -{ - u32 hard_psw, ffpi; - int reload_value, divider = 1; - - ffpi = amazon_get_fpi_hz(); - - reload_value = 65536 - timeout * ffpi / 256; - - if (reload_value < 0) { - divider = 0; - reload_value = 65536 - timeout * ffpi / 16384; - } - - if (reload_value < 0){ - printk(KERN_INFO DRV_NAME "timeout too large %d\n", timeout); - return -EINVAL; - } - - printk(KERN_INFO DRV_NAME "timeout:%d reload_value: %8x\n", timeout, reload_value); - - hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel((hard_psw & 0xff00) + (reload_value << 16) + 0xf2, AMAZON_WDT_CON0); - wmb(); - - amazon_writel(divider << 2, AMAZON_WDT_CON1); - wmb(); - - hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3); - wmb(); - return 0; -} - -void wdt_disable(void) -{ - u32 hard_psw = 0; - - hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf2); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON1, 0x8, 0x8); - wmb(); - - hard_psw=(amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + - (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; - amazon_writel(hard_psw, AMAZON_WDT_CON0); - wmb(); - - amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3); - wmb(); - - return; -} - -static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -{ - int result=0; - static int timeout=-1; - - switch(cmd){ - case AMAZON_WDT_IOC_START: - printk(KERN_INFO DRV_NAME "enable watch dog timer!\n"); - if (copy_from_user((void*)&timeout, (void*)arg, sizeof (int))) { - printk(KERN_INFO DRV_NAME "invalid argument\n"); - result=-EINVAL; - } else if ((result = wdt_enable(timeout)) < 0) { - timeout = -1; - } - break; - - case AMAZON_WDT_IOC_STOP: - printk(KERN_INFO DRV_NAME "disable watch dog timer\n"); - timeout = -1; - wdt_disable(); - break; - - case AMAZON_WDT_IOC_PING: - if (timeout < 0) { - result = -EIO; - } else { - result = wdt_enable(timeout); - } - break; - - default: - result=-EINVAL; - break; - } - return result; -} - -static ssize_t wdt_read(struct file *file, char *buf, size_t count, loff_t *offset) -{ - return 0; -} - -static ssize_t wdt_write(struct file *file, const char *buf, size_t count, loff_t *offset) -{ - return count; -} - -static int wdt_open(struct inode *inode, struct file *file) -{ - if (amazon_wdt_isopen == 1) - return -EBUSY; - - amazon_wdt_isopen = 1; - printk(KERN_INFO DRV_NAME "opened\n"); - return 0; -} - -static int wdt_release(struct inode *inode, struct file *file) -{ - amazon_wdt_isopen = 0; - printk(KERN_INFO DRV_NAME "closed\n"); - return 0; -} - -#ifdef AMAZON_WDT_DEBUG -int wdt_register_proc_read(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int len=0; - len+=sprintf(buf+len,"NMISR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_NMISR)); - len+=sprintf(buf+len,"RST_REQ: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_REQ)); - len+=sprintf(buf+len,"RST_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_SR)); - len+=sprintf(buf+len,"WDT_CON0: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON0)); - len+=sprintf(buf+len,"WDT_CON1: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON1)); - len+=sprintf(buf+len,"WDT_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_SR)); - *eof = 1; - return len; -} -#endif - -static struct file_operations wdt_fops = { - read: wdt_read, - write: wdt_write, - ioctl: wdt_ioctl, - open: wdt_open, - release: wdt_release, -}; - -int __init amazon_wdt_init_module(void) -{ - int result = result = register_chrdev(0, "watchdog", &wdt_fops); - - if (result < 0) { - printk(KERN_INFO DRV_NAME "cannot register device\n"); - return result; - } - -#ifdef AMAZON_WDT_DEBUG - amazon_wdt_dir=proc_mkdir("amazon_wdt",NULL); - create_proc_read_entry("wdt_register", 0, amazon_wdt_dir, - wdt_register_proc_read, NULL); -#endif - - amazon_wdt_isopen=0; - printk(KERN_INFO DRV_NAME "driver loaded but inactive"); - return 0; -} - -void amazon_wdt_cleanup_module(void) -{ - unregister_chrdev(0, "watchdog"); -#ifdef AMAZON_WDT_DEBUG - remove_proc_entry("wdt_register", amazon_wdt_dir); - remove_proc_entry("amazon_wdt", NULL); -#endif - printk(KERN_INFO DRV_NAME "unregistered"); - return; -} - -MODULE_LICENSE ("GPL"); -MODULE_AUTHOR("Infineon / John Crispin "); -MODULE_DESCRIPTION("AMAZON WDT driver"); - -module_init(amazon_wdt_init_module); -module_exit(amazon_wdt_cleanup_module); - diff --git a/target/linux/amazon-2.6/files/drivers/mtd/maps/amazon.c b/target/linux/amazon-2.6/files/drivers/mtd/maps/amazon.c deleted file mode 100644 index 3e7dc4f583..0000000000 --- a/target/linux/amazon-2.6/files/drivers/mtd/maps/amazon.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Handle mapping of the flash memory access routines - * on Amazon based devices. - * - * Copyright(C) 2004 peng.liu@infineon.com - * - * This code is GPLed - * - */ -// 000005:fchang 2005/6/2 Modified by Bingtao to double check if the EBU is enabled/disabled -// 506231:tc.chen 2005/06/23 increase firmware partition size form 192KB to 256KB -// 050701:linmars 2005/07/01 fix flash size wrong alignment after increase firmware partition -// 165001:henryhsu 2005/8/18 Remove the support for Intel flash because of 2.1 not enough rootfs partition size -// 165001:henryhsu 2005/9/7 Rolback to support INtel flash -// 509071:tc.chen 2005/09/07 Reduced flash writing time -// 511046:linmars 2005/11/04 change bootloader size from 128 into 64 -// 511241:linmars 2005/11/24 merge TaiChen's IRM patch - -// copyright 2005 infineon - -// copyright 2007 john crispin -// copyright 2007 felix fietkau - -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#define AMAZON_PCI_ARB_CTL_ALT 0xb100205c -#define AMAZON_MTD_REG32( addr ) (*(volatile u32 *)(addr)) - - -static struct map_info amazon_map = { - .name = "AMAZON_FLASH", - .bankwidth = 2, - .size = 0x400000, -}; - -static map_word amazon_read16(struct map_info * map, unsigned long ofs) -{ - map_word temp; - ofs ^= 2; - temp.x[0] = *((__u16 *) (map->virt + ofs)); - return temp; -} - -static void amazon_write16(struct map_info *map, map_word d, unsigned long adr) -{ - adr ^= 2; - *((__u16 *) (map->virt + adr)) = d.x[0]; -} - -void amazon_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - u8 *p; - u8 *to_8; - ssize_t l = len; - from = (unsigned long) (from + map->virt); - p = (u8 *) from; - to_8 = (u8 *) to; - while(len--){ - *to_8++ = *p++; - } -} - -void amazon_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) -{ - u8 *p = (u8*) from; - u8 *to_8; - to += (unsigned long) map->virt; - to_8 = (u8*)to; - while(len--){ - *p++ = *to_8++; - } -} - -#define UBOOT_SIZE 0x40000 - -static struct mtd_partition amazon_partitions[3] = { - { - name:"U-Boot", /* U-Boot firmware */ - offset:0x00000000, - size:UBOOT_SIZE , /* 128k */ - }, - { - name:"kernel", /* firmware */ - offset:UBOOT_SIZE, - size:0x00100000, /* 192K */ - }, - { - name:"rootfs", /* default partition */ - offset:0x00200000, - size:0x00200000, - }, -}; - - -unsigned long flash_start = 0x13000000; -unsigned long flash_size = 0x800000; -unsigned long uImage_size = 0x10000d; - -int find_uImage_size(unsigned long start_offset){ - unsigned long temp; - - printk("trying to find uImage and its size\n"); - amazon_copy_from(&amazon_map, &temp, start_offset + 12, 4); - printk("kernel size is %d \n", temp + 0x40); - return temp + 0x40; -} - -int __init init_amazon_mtd(void) -{ - int ret = 0; - struct mtd_info *mymtd = NULL; - struct mtd_partition *parts = NULL; - - *AMAZON_EBU_BUSCON0 = 0x1d7ff; - - amazon_map.read = amazon_read16; - amazon_map.write = amazon_write16; - amazon_map.copy_from = amazon_copy_from; - amazon_map.copy_to = amazon_copy_to; - - amazon_map.phys = flash_start; - amazon_map.virt = ioremap_nocache(flash_start, flash_size); - - if (!amazon_map.virt) { - printk(KERN_WARNING "Failed to ioremap!\n"); - return -EIO; - } - - mymtd = (struct mtd_info *) do_map_probe("cfi_probe", &amazon_map); - if (!mymtd) { - iounmap(amazon_map.virt); - printk("probing failed\n"); - return -ENXIO; - } - - mymtd->owner = THIS_MODULE; - parts = &amazon_partitions[0]; - amazon_partitions[2].offset = UBOOT_SIZE + find_uImage_size(amazon_partitions[1].offset); - amazon_partitions[1].size = mymtd->size - amazon_partitions[1].offset - (2 * mymtd->erasesize); - amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - (2 * mymtd->erasesize); - add_mtd_partitions(mymtd, parts, 3); - return 0; -} - -static void __exit cleanup_amazon_mtd(void) -{ - /* FIXME! */ -} - -module_init(init_amazon_mtd); -module_exit(cleanup_amazon_mtd); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("john crispin blogic@openwrt.org"); -MODULE_DESCRIPTION("MTD map driver for AMAZON boards"); diff --git a/target/linux/amazon-2.6/files/drivers/net/amazon_sw.c b/target/linux/amazon-2.6/files/drivers/net/amazon_sw.c deleted file mode 100644 index d19db6e36d..0000000000 --- a/target/linux/amazon-2.6/files/drivers/net/amazon_sw.c +++ /dev/null @@ -1,876 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. - */ -//----------------------------------------------------------------------- -/* - * Description: - * Driver for Infineon Amazon 3 port switch - */ -//----------------------------------------------------------------------- -/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] - * Created: 7-April-2004 - */ -//----------------------------------------------------------------------- -/* History - * Changed on: Jun 28, 2004 - * Changed by: peng.liu@infineon.com - * Reason: add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL) - * - * Changed on: Apr 6, 2005 - * Changed by: mars.lin@infineon.com - * Reason : supoort port identification - */ - - -// copyright 2004-2005 infineon.com - -// copyright 2007 john crispin -// copyright 2007 felix fietkau - - -// TODO -// port vlan code from bcrm target... the tawainese code was scrapped due to crappyness -// check all the mmi reg settings and possibly document them better -// verify the ethtool code -// remove the while(1) stuff -// further clean up and rework ... but it works for now -// check the mode[]=bridge stuff -// verify that the ethaddr can be set from u-boot - - -#ifndef __KERNEL__ -#define __KERNEL__ -#endif - - -#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS) -#define MODVERSIONS -#endif - -#if defined(MODVERSIONS) && !defined(__GENKSYMS__) -#include -#endif - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -// how many mii ports are there ? -#define AMAZON_SW_INT_NO 2 - -#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536 - -/***************************************** Module Parameters *************************************/ -char mode[] = "bridge"; -module_param_array(mode, charp, NULL, 0); - -static int timeout = 1 * HZ; -module_param(timeout, int, 0); - -int switch_init(struct net_device *dev); -void switch_tx_timeout(struct net_device *dev); - -struct net_device switch_devs[2] = { - {init:switch_init,}, - {init:switch_init,} -}; - -int add_mac_table_entry(u64 entry_value) -{ - int i; - u32 data1, data2; - - AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7; - - for (i = 0; i < 32; i++) { - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1); - data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2); - if ((data1 & (0x00700000)) != 0x00700000) - continue; - AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32); - AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff; - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - break; - } - AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7; - if (i >= 32) - return -1; - return OK; -} - -u64 read_mac_table_entry(int index) -{ - u32 data1, data2; - u64 value; - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff; - data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2); - value = (u64) data1 << 32 | (u64) data2; - return value; -} - -int write_mac_table_entry(int index, u64 value) -{ - u32 data1, data2; - data1 = (u32) (value >> 32); - data2 = (u32) value & 0xffffffff; - AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1; - AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2; - AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index; - while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; - return OK; -} - -u32 get_mdio_reg(int phy_addr, int reg_num) -{ - u32 value; - AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16); - while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {}; - value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff; - return value; -} - -int set_mdio_reg(int phy_addr, int reg_num, u32 value) -{ - AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff); - while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {}; - return OK; -} - -int auto_negotiate(int phy_addr) -{ - u32 value = 0; - value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG); - set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET)); - return OK; -} - -/* - In this version of switch driver, we split the dma channels for the switch. - 2 for port0 and 2 for port1. So that we can do internal bridging if necessary. - In switch mode, packets coming in from port0 or port1 is able to do Destination - address lookup. Packets coming from port0 with destination address of port1 should - not go to pmac again. The switch hardware should be able to do the switch in the hard - ware level. Packets coming from the pmac should not do the DA look up in that the - desination is already known for the kernel. It only needs to go to the correct NIC to - find its way out. - */ -int amazon_sw_chip_init(void) -{ - u32 tmp1; - int i = 0; - - /* Aging tick select: 5mins */ - tmp1 = 0xa0; - if (strcmp(mode, "bridge") == 0) { - // bridge mode, set militarised mode to 1, no learning! - tmp1 |= 0xC00; - } else { - // enable learning for P0 and P1, - tmp1 |= 3; - } - - /* unknown broadcast/multicast/unicast to all ports */ - AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff; - - AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1; - - /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */ -#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE) - AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700; -#else - AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401; -#endif - - /* EPC: 1 split the two NIC in tx direction CRC is generated */ - AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6; - - // for bi-directional - AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412; - AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412; - AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826; - AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0; - - AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000; - // clock for PHY - AMAZON_SW_REG32(AMAZON_CGU_IFCCR) = (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004; - // enable power for PHY - AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY; - // set reverse MII, enable MDIO statemachine - AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf; - while (1) - if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0) - break; - AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff; - - // auto negotiation - AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000; - auto_negotiate(0x1f); - - /* enable all ports */ - AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7; - for (i = 0; i < 32; i++) - write_mac_table_entry(i, 1 << 50); - return 0; -} - -static unsigned char my_ethaddr[MAX_ADDR_LEN]; -/* need to get the ether addr from u-boot */ -static int __init ethaddr_setup(char *line) -{ - char *ep; - int i; - - memset(my_ethaddr, 0, MAX_ADDR_LEN); - for (i = 0; i < 6; i++) { - my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0; - if (line) - line = (*ep) ? ep + 1 : ep; - } - printk("mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]); - return 0; -} - -__setup("ethaddr=", ethaddr_setup); - -static void open_rx_dma(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - struct dma_device_info *dma_dev = priv->dma_device; - int i; - - for (i = 0; i < dma_dev->num_rx_chan; i++) - dma_dev->rx_chan[i].control = 1; - dma_device_update_rx(dma_dev); -} - -#ifdef CONFIG_NET_HW_FLOWCONTROL -static void close_rx_dma(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - struct dma_device_info *dma_dev = priv->dma_device; - int i; - - for (i = 0; i < dma_dev->num_rx_chan; i++) - dma_dev->rx_chan[i].control = 0; - dma_device_update_rx(dma_dev); -} - -void amazon_xon(struct net_device *dev) -{ - unsigned long flag; - local_irq_save(flag); - open_rx_dma(dev); - local_irq_restore(flag); -} -#endif - -int switch_open(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - if (!strcmp(dev->name, "eth1")) { - priv->mdio_phy_addr = PHY0_ADDR; - } - open_rx_dma(dev); - -#ifdef CONFIG_NET_HW_FLOWCONTROL - if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) { - printk("Hardware Flow Control register fails\n"); - } -#endif - - netif_start_queue(dev); - return OK; -} - -int switch_release(struct net_device *dev) -{ - int i; - struct switch_priv *priv = (struct switch_priv *) dev->priv; - struct dma_device_info *dma_dev = priv->dma_device; - - for (i = 0; i < dma_dev->num_tx_chan; i++) - dma_dev->tx_chan[i].control = 0; - for (i = 0; i < dma_dev->num_rx_chan; i++) - dma_dev->rx_chan[i].control = 0; - - dma_device_update(dma_dev); - -#ifdef CONFIG_NET_HW_FLOWCONTROL - if (priv->fc_bit) { - netdev_unregister_fc(priv->fc_bit); - } -#endif - netif_stop_queue(dev); - - return OK; -} - - -void switch_rx(struct net_device *dev, int len, struct sk_buff *skb) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; -#ifdef CONFIG_NET_HW_FLOWCONTROL - int mit_sel = 0; -#endif - skb->dev = dev; - skb->protocol = eth_type_trans(skb, dev); - -#ifdef CONFIG_NET_HW_FLOWCONTROL - mit_sel = netif_rx(skb); - switch (mit_sel) { - case NET_RX_SUCCESS: - case NET_RX_CN_LOW: - case NET_RX_CN_MOD: - break; - case NET_RX_CN_HIGH: - break; - case NET_RX_DROP: - if ((priv->fc_bit) - && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) { - close_rx_dma(dev); - } - break; - } -#else - netif_rx(skb); -#endif - priv->stats.rx_packets++; - priv->stats.rx_bytes += len; - return; -} - -int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev) -{ - struct switch_priv *priv = dev->priv; - struct dma_device_info *dma_dev = priv->dma_device; - - dma_dev->current_tx_chan = 0; - return dma_device_write(dma_dev, buf, len, priv->skb); -} - -int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev) -{ - int len; - char *data; - struct switch_priv *priv = (struct switch_priv *) dev->priv; - - len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; - data = skb->data; - priv->skb = skb; - dev->trans_start = jiffies; - - if (switch_hw_tx(data, len, dev) != len) { - dev_kfree_skb_any(skb); - return OK; - } - - priv->stats.tx_packets++; - priv->stats.tx_bytes += len; - return OK; -} - -void switch_tx_timeout(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - priv->stats.tx_errors++; - netif_wake_queue(dev); - return; -} - -void negotiate(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG); - - data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD); - - switch (priv->current_speed_selection) { - case 10: - if (priv->current_duplex == full) - data |= MDIO_ADVERT_10_FD; - else if (priv->current_duplex == half) - data |= MDIO_ADVERT_10_HD; - else - data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD; - break; - - case 100: - if (priv->current_duplex == full) - data |= MDIO_ADVERT_100_FD; - else if (priv->current_duplex == half) - data |= MDIO_ADVERT_100_HD; - else - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD; - break; - - case 0: /* Auto */ - if (priv->current_duplex == full) - data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD; - else if (priv->current_duplex == half) - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD; - else - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD; - break; - - default: /* assume autoneg speed and duplex */ - data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD; - } - - set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data); - - /* Renegotiate with link partner */ - - data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG); - data |= MDIO_BC_NEGOTIATE; - - set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data); - -} - - -void set_duplex(struct net_device *dev, enum duplex new_duplex) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - if (new_duplex != priv->current_duplex) { - priv->current_duplex = new_duplex; - negotiate(dev); - } -} - -void set_speed(struct net_device *dev, unsigned long speed) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - priv->current_speed_selection = speed; - negotiate(dev); -} - -static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - struct ethtool_cmd ecmd; - - if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd))) - return -EFAULT; - - switch (ecmd.cmd) { - case ETHTOOL_GSET: - memset((void *) &ecmd, 0, sizeof(ecmd)); - ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; - ecmd.port = PORT_TP; - ecmd.transceiver = XCVR_EXTERNAL; - ecmd.phy_address = priv->mdio_phy_addr; - - ecmd.speed = priv->current_speed; - - ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; - - ecmd.advertising = ADVERTISED_TP; - if (priv->current_duplex == autoneg && priv->current_speed_selection == 0) - ecmd.advertising |= ADVERTISED_Autoneg; - else { - ecmd.advertising |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; - if (priv->current_speed_selection == 10) - ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full); - else if (priv->current_speed_selection == 100) - ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full); - if (priv->current_duplex == half) - ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full); - else if (priv->current_duplex == full) - ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half); - } - ecmd.autoneg = AUTONEG_ENABLE; - if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd))) - return -EFAULT; - break; - - case ETHTOOL_SSET: - if (!capable(CAP_NET_ADMIN)) { - return -EPERM; - } - if (ecmd.autoneg == AUTONEG_ENABLE) { - set_duplex(dev, autoneg); - set_speed(dev, 0); - } else { - set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full); - set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100); - } - break; - - case ETHTOOL_GDRVINFO: - { - struct ethtool_drvinfo info; - memset((void *) &info, 0, sizeof(info)); - strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1); - strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1); - strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1); - info.regdump_len = 0; - info.eedump_len = 0; - info.testinfo_len = 0; - if (copy_to_user(ifr->ifr_data, &info, sizeof(info))) - return -EFAULT; - } - break; - case ETHTOOL_NWAY_RST: - if (priv->current_duplex == autoneg && priv->current_speed_selection == 0) - negotiate(dev); - break; - default: - return -EOPNOTSUPP; - break; - } - return 0; -} - - - -int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req) -{ - int cmd; - int i; - cmd = req->cmd; - switch (cmd) { - case RESET_MAC_TABLE: - for (i = 0; i < 32; i++) { - write_mac_table_entry(i, 0); - } - break; - case READ_MAC_ENTRY: - req->entry_value = read_mac_table_entry(req->index); - break; - case WRITE_MAC_ENTRY: - write_mac_table_entry(req->index, req->entry_value); - break; - case ADD_MAC_ENTRY: - add_mac_table_entry(req->entry_value); - break; - default: - return -EINVAL; - } - - return 0; -} - - -/* - the ioctl for the switch driver is developed in the conventional way - the control type falls into some basic categories, among them, the - SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and - MAC_TABLE_TOOLS are designed specifically for amazon chip. User - should be aware of the data structures used in these interfaces. -*/ -int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data; - struct mac_table_req *switch_mac_table_req; - switch (cmd) { - case SIOCETHTOOL: - switch_ethtool_ioctl(dev, ifr); - break; - case SIOCGMIIPHY: /* Get PHY address */ - break; - case SIOCGMIIREG: /* Read MII register */ - break; - case SIOCSMIIREG: /* Write MII register */ - break; - case SET_ETH_SPEED_10: /* 10 Mbps */ - break; - case SET_ETH_SPEED_100: /* 100 Mbps */ - break; - case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */ - break; - case SET_ETH_DUPLEX_HALF: /* Half duplex. */ - break; - case SET_ETH_DUPLEX_FULL: /* Full duplex. */ - break; - case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex */ - break; - case SET_ETH_REG: - AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value; - break; - case MAC_TABLE_TOOLS: - switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data; - mac_table_tools_ioctl(dev, switch_mac_table_req); - break; - default: - return -EINVAL; - } - - return 0; -} - -struct net_device_stats *switch_stats(struct net_device *dev) -{ - struct switch_priv *priv = (struct switch_priv *) dev->priv; - return &priv->stats; -} - -int switch_change_mtu(struct net_device *dev, int new_mtu) -{ - if (new_mtu >= 1516) - new_mtu = 1516; - dev->mtu = new_mtu; - return 0; -} - -int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev) -{ - u8 *buf = NULL; - int len = 0; - struct sk_buff *skb = NULL; - - len = dma_device_read(dma_dev, &buf, (void **) &skb); - - if (len >= 0x600) { - printk("packet too large %d\n", len); - goto switch_hw_receive_err_exit; - } - - /* remove CRC */ - len -= 4; - if (skb == NULL) { - printk("cannot restore pointer\n"); - goto switch_hw_receive_err_exit; - } - if (len > (skb->end - skb->tail)) { - printk("BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail); - goto switch_hw_receive_err_exit; - } - skb_put(skb, len); - skb->dev = dev; - switch_rx(dev, len, skb); - return OK; - - switch_hw_receive_err_exit: - if (skb) - dev_kfree_skb_any(skb); - return -EIO; -} - -int dma_intr_handler(struct dma_device_info *dma_dev, int status) -{ - struct net_device *dev; - - dev = switch_devs + (u32) dma_dev->priv; - switch (status) { - case RCV_INT: - switch_hw_receive(dev, dma_dev); - break; - case TX_BUF_FULL_INT: - netif_stop_queue(dev); - break; - case TRANSMIT_CPT_INT: - netif_wake_queue(dev); - break; - } - return OK; -} - -/* reserve 2 bytes in front of data pointer*/ -u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt) -{ - u8 *buffer = NULL; - struct sk_buff *skb = NULL; - skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE); - if (skb == NULL) { - return NULL; - } - buffer = (u8 *) (skb->data); - skb_reserve(skb, 2); - *(int *) opt = (int) skb; - *byte_offset = 2; - return buffer; -} - -int dma_buffer_free(u8 * dataptr, void *opt) -{ - struct sk_buff *skb = NULL; - if (opt == NULL) { - kfree(dataptr); - } else { - skb = (struct sk_buff *) opt; - dev_kfree_skb_any(skb); - } - return OK; -} - -int init_dma_device(_dma_device_info * dma_dev) -{ - int i; - int num_tx_chan, num_rx_chan; - if (strcmp(dma_dev->device_name, "switch1") == 0) { - num_tx_chan = 1; - num_rx_chan = 2; - dma_dev->priv = (void *) 0; - } else { - num_tx_chan = 1; - num_rx_chan = 2; - dma_dev->priv = (void *) 1; - } - - dma_dev->weight = 1; - dma_dev->num_tx_chan = num_tx_chan; - dma_dev->num_rx_chan = num_rx_chan; - dma_dev->ack = 1; - dma_dev->tx_burst_len = 4; - dma_dev->rx_burst_len = 4; - for (i = 0; i < dma_dev->num_tx_chan; i++) { - dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT; - dma_dev->tx_chan[i].desc_num = 10; - dma_dev->tx_chan[i].packet_size = 0; - dma_dev->tx_chan[i].control = 0; - } - for (i = 0; i < num_rx_chan; i++) { - dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT; - dma_dev->rx_chan[i].desc_num = 10; - dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE; - dma_dev->rx_chan[i].control = 0; - } - dma_dev->intr_handler = dma_intr_handler; - dma_dev->buffer_alloc = dma_buffer_alloc; - dma_dev->buffer_free = dma_buffer_free; - return 0; -} - -int switch_set_mac_address(struct net_device *dev, void *p) -{ - struct sockaddr *addr = p; - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - return OK; -} - - -int switch_init(struct net_device *dev) -{ - u64 retval = 0; - int i; - int result; - struct switch_priv *priv; - ether_setup(dev); /* assign some of the fields */ - printk("%s up using ", dev->name); - dev->open = switch_open; - dev->stop = switch_release; - dev->hard_start_xmit = switch_tx; - dev->do_ioctl = switch_ioctl; - dev->get_stats = switch_stats; - dev->change_mtu = switch_change_mtu; - dev->set_mac_address = switch_set_mac_address; - dev->tx_timeout = switch_tx_timeout; - dev->watchdog_timeo = timeout; - - SET_MODULE_OWNER(dev); - - dev->priv = kmalloc(sizeof(struct switch_priv), GFP_KERNEL); - if (dev->priv == NULL) - return -ENOMEM; - memset(dev->priv, 0, sizeof(struct switch_priv)); - priv = dev->priv; - priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL); - if ((dev - switch_devs) == 0) { - sprintf(priv->dma_device->device_name, "switch1"); - } else if ((dev - switch_devs) == 1) { - sprintf(priv->dma_device->device_name, "switch2"); - } - printk("\"%s\"\n", priv->dma_device->device_name); - init_dma_device(priv->dma_device); - result = dma_device_register(priv->dma_device); - - /* read the mac address from the mac table and put them into the mac table. */ - for (i = 0; i < 6; i++) { - retval += my_ethaddr[i]; - } - /* ethaddr not set in u-boot ? */ - if (retval == 0) { - dev->dev_addr[0] = 0x00; - dev->dev_addr[1] = 0x20; - dev->dev_addr[2] = 0xda; - dev->dev_addr[3] = 0x86; - dev->dev_addr[4] = 0x23; - dev->dev_addr[5] = 0x74 + (unsigned char) (dev - switch_devs); - } else { - for (i = 0; i < 6; i++) { - dev->dev_addr[i] = my_ethaddr[i]; - } - dev->dev_addr[5] += +(unsigned char) (dev - switch_devs); - } - return OK; -} - -int switch_init_module(void) -{ - int i = 0, result, device_present = 0; - - for (i = 0; i < AMAZON_SW_INT_NO; i++) { - sprintf(switch_devs[i].name, "eth%d", i); - - if ((result = register_netdev(switch_devs + i))) - printk("error %i registering device \"%s\"\n", result, switch_devs[i].name); - else - device_present++; - } - amazon_sw_chip_init(); - return device_present ? 0 : -ENODEV; -} - -void switch_cleanup(void) -{ - int i; - struct switch_priv *priv; - for (i = 0; i < AMAZON_SW_INT_NO; i++) { - priv = switch_devs[i].priv; - if (priv->dma_device) { - dma_device_unregister(priv->dma_device); - kfree(priv->dma_device); - } - kfree(switch_devs[i].priv); - unregister_netdev(switch_devs + i); - } - return; -} - -module_init(switch_init_module); -module_exit(switch_cleanup); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Wu Qi Ming"); diff --git a/target/linux/amazon-2.6/files/drivers/serial/amazon_asc.c b/target/linux/amazon-2.6/files/drivers/serial/amazon_asc.c deleted file mode 100644 index 7c17cb0f4a..0000000000 --- a/target/linux/amazon-2.6/files/drivers/serial/amazon_asc.c +++ /dev/null @@ -1,685 +0,0 @@ -/* - * Driver for AMAZONASC serial ports - * - * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. - * Based on drivers/serial/serial_s3c2400.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2004 Infineon IFAP DC COM CPE - * Copyright (C) 2007 Felix Fietkau - * Copyright (C) 2007 John Crispin - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#define PORT_AMAZONASC 111 - -#include - -#define UART_NR 1 - -#define UART_DUMMY_UER_RX 1 - -#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR -#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR -#define SERIAL_AMAZONASC_MINOR 64 -#define SERIAL_AMAZONASC_NR UART_NR - -static void amazonasc_tx_chars(struct uart_port *port); -extern void prom_printf(const char * fmt, ...); -static struct uart_port amazonasc_ports[UART_NR]; -static struct uart_driver amazonasc_reg; -static unsigned int uartclk = 0; -extern unsigned int amazon_get_fpi_hz(void); - -static void amazonasc_stop_tx(struct uart_port *port) -{ - /* fifo underrun shuts up after firing once */ - return; -} - -static void amazonasc_start_tx(struct uart_port *port) -{ - unsigned long flags; - - local_irq_save(flags); - amazonasc_tx_chars(port); - local_irq_restore(flags); - - return; -} - -static void amazonasc_stop_rx(struct uart_port *port) -{ - /* clear the RX enable bit */ - amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON); -} - -static void amazonasc_enable_ms(struct uart_port *port) -{ - /* no modem signals */ - return; -} - -static void -amazonasc_rx_chars(struct uart_port *port) -{ - struct tty_struct *tty = port->info->tty; - unsigned int ch = 0, rsr = 0, fifocnt; - - fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK; - while (fifocnt--) - { - u8 flag = TTY_NORMAL; - ch = amazon_readl(AMAZON_ASC_RBUF); - rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX; - tty_flip_buffer_push(tty); - port->icount.rx++; - - /* - * Note that the error handling code is - * out of the main execution path - */ - if (rsr & ASCCON_ANY) { - if (rsr & ASCCON_PE) { - port->icount.parity++; - amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE); - } else if (rsr & ASCCON_FE) { - port->icount.frame++; - amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE); - } - if (rsr & ASCCON_OE) { - port->icount.overrun++; - amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE); - } - - rsr &= port->read_status_mask; - - if (rsr & ASCCON_PE) - flag = TTY_PARITY; - else if (rsr & ASCCON_FE) - flag = TTY_FRAME; - } - - if ((rsr & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, ch, flag); - - if (rsr & ASCCON_OE) - /* - * Overrun is special, since it's reported - * immediately, and doesn't affect the current - * character - */ - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - if (ch != 0) - tty_flip_buffer_push(tty); - - return; -} - - -static void amazonasc_tx_chars(struct uart_port *port) -{ - struct circ_buf *xmit = &port->info->xmit; - - if (uart_tx_stopped(port)) { - amazonasc_stop_tx(port); - return; - } - - while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL) - { - if (port->x_char) { - amazon_writel(port->x_char, AMAZON_ASC_TBUF); - port->icount.tx++; - port->x_char = 0; - continue; - } - - if (uart_circ_empty(xmit)) - break; - - amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); -} - -static irqreturn_t amazonasc_tx_int(int irq, void *port) -{ - amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1); - amazonasc_start_tx(port); - - /* clear any pending interrupts */ - amazon_writel_masked(AMAZON_ASC_WHBCON, - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE)); - - return IRQ_HANDLED; -} - -static irqreturn_t amazonasc_er_int(int irq, void *port) -{ - /* clear any pending interrupts */ - amazon_writel_masked(AMAZON_ASC_WHBCON, - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), - (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE)); - - return IRQ_HANDLED; -} - -static irqreturn_t amazonasc_rx_int(int irq, void *port) -{ - amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1); - amazonasc_rx_chars((struct uart_port *) port); - return IRQ_HANDLED; -} - -static u_int amazonasc_tx_empty(struct uart_port *port) -{ - int status; - - /* - * FSTAT tells exactly how many bytes are in the FIFO. - * The question is whether we really need to wait for all - * 16 bytes to be transmitted before reporting that the - * transmitter is empty. - */ - status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK; - return status ? 0 : TIOCSER_TEMT; -} - -static u_int amazonasc_get_mctrl(struct uart_port *port) -{ - /* no modem control signals - the readme says to pretend all are set */ - return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR; -} - -static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl) -{ - /* no modem control - just return */ - return; -} - -static void amazonasc_break_ctl(struct uart_port *port, int break_state) -{ - /* no way to send a break */ - return; -} - -static int amazonasc_startup(struct uart_port *port) -{ - unsigned int con = 0; - unsigned long flags; - int retval; - - /* this assumes: CON.BRS = CON.FDE = 0 */ - if (uartclk == 0) - uartclk = amazon_get_fpi_hz(); - - amazonasc_ports[0].uartclk = uartclk; - - local_irq_save(flags); - - /* this setup was probably already done in u-boot */ - /* ASC and GPIO Port 1 bits 3 and 4 share the same pins - * P1.3 (RX) in, Alternate 10 - * P1.4 (TX) in, Alternate 10 - */ - amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input - amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11 - amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00 - amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10); - - /* set up the CLC */ - amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0); - amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET); - - /* asynchronous mode */ - con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN; - - /* choose the line - there's only one */ - amazon_writel(0, AMAZON_ASC_PISEL); - amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, - AMAZON_ASC_TXFCON); - amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, - AMAZON_ASC_RXFCON); - wmb(); - - amazon_writel_masked(AMAZON_ASC_CON, con, con); - - retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port); - if (retval){ - printk("failed to request amazonasc_rx_int\n"); - return retval; - } - retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port); - if (retval){ - printk("failed to request amazonasc_tx_int\n"); - goto err1; - } - - retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port); - if (retval){ - printk("failed to request amazonasc_er_int\n"); - goto err2; - } - - local_irq_restore(flags); - return 0; - -err2: - free_irq(AMAZONASC_TIR, port); - -err1: - free_irq(AMAZONASC_RIR, port); - local_irq_restore(flags); - return retval; -} - -static void amazonasc_shutdown(struct uart_port *port) -{ - free_irq(AMAZONASC_RIR, port); - free_irq(AMAZONASC_TIR, port); - free_irq(AMAZONASC_EIR, port); - /* - * disable the baudrate generator to disable the ASC - */ - amazon_writel(0, AMAZON_ASC_CON); - - /* flush and then disable the fifos */ - amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU); - amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0); - amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU); - amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0); -} - -static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old) -{ - unsigned int cflag; - unsigned int iflag; - unsigned int baud, quot; - unsigned int con = 0; - unsigned long flags; - - cflag = new->c_cflag; - iflag = new->c_iflag; - - /* byte size and parity */ - switch (cflag & CSIZE) { - /* 7 bits are always with parity */ - case CS7: con = ASCCON_M_7ASYNCPAR; break; - /* the ASC only suports 7 and 8 bits */ - case CS5: - case CS6: - default: - if (cflag & PARENB) - con = ASCCON_M_8ASYNCPAR; - else - con = ASCCON_M_8ASYNC; - break; - } - if (cflag & CSTOPB) - con |= ASCCON_STP; - if (cflag & PARENB) { - if (!(cflag & PARODD)) - con &= ~ASCCON_ODD; - else - con |= ASCCON_ODD; - } - - port->read_status_mask = ASCCON_OE; - if (iflag & INPCK) - port->read_status_mask |= ASCCON_FE | ASCCON_PE; - - port->ignore_status_mask = 0; - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCCON_FE | ASCCON_PE; - - if (iflag & IGNBRK) { - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (iflag & IGNPAR) - port->ignore_status_mask |= ASCCON_OE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_UER_RX; - - /* set error signals - framing, parity and overrun */ - con |= ASCCON_FEN; - con |= ASCCON_OEN; - con |= ASCCON_PEN; - /* enable the receiver */ - con |= ASCCON_REN; - - /* block the IRQs */ - local_irq_save(flags); - - /* set up CON */ - amazon_writel(con, AMAZON_ASC_CON); - - /* Set baud rate - take a divider of 2 into account */ - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - quot = quot/2 - 1; - - /* the next 3 probably already happened when we set CON above */ - /* disable the baudrate generator */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0); - /* make sure the fractional divider is off */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0); - /* set up to use divisor of 2 */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0); - /* now we can write the new baudrate into the register */ - amazon_writel(quot, AMAZON_ASC_BTR); - /* turn the baudrate generator back on */ - amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R); - - local_irq_restore(flags); -} - -static const char *amazonasc_type(struct uart_port *port) -{ - return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL; -} - -/* - * Release the memory region(s) being used by 'port' - */ -static void amazonasc_release_port(struct uart_port *port) -{ - return; -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int amazonasc_request_port(struct uart_port *port) -{ - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void amazonasc_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - port->type = PORT_AMAZONASC; - amazonasc_request_port(port); - } -} - -/* - * verify the new serial_struct (for TIOCSSERIAL). - */ -static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - int ret = 0; - if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC) - ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= NR_IRQS) - ret = -EINVAL; - if (ser->baud_base < 9600) - ret = -EINVAL; - return ret; -} - -static struct uart_ops amazonasc_pops = { - .tx_empty = amazonasc_tx_empty, - .set_mctrl = amazonasc_set_mctrl, - .get_mctrl = amazonasc_get_mctrl, - .stop_tx = amazonasc_stop_tx, - .start_tx = amazonasc_start_tx, - .stop_rx = amazonasc_stop_rx, - .enable_ms = amazonasc_enable_ms, - .break_ctl = amazonasc_break_ctl, - .startup = amazonasc_startup, - .shutdown = amazonasc_shutdown, - .set_termios = amazonasc_set_termios, - .type = amazonasc_type, - .release_port = amazonasc_release_port, - .request_port = amazonasc_request_port, - .config_port = amazonasc_config_port, - .verify_port = amazonasc_verify_port, -}; - -static struct uart_port amazonasc_ports[UART_NR] = { - { - membase: (void *)AMAZON_ASC, - mapbase: AMAZON_ASC, - iotype: SERIAL_IO_MEM, - irq: AMAZONASC_RIR, /* RIR */ - uartclk: 0, /* filled in dynamically */ - fifosize: 16, - unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */ - type: PORT_AMAZONASC, - ops: &amazonasc_pops, - flags: ASYNC_BOOT_AUTOCONF, - }, -}; - -static void amazonasc_console_write(struct console *co, const char *s, u_int count) -{ - int i, fifocnt; - unsigned long flags; - local_irq_save(flags); - for (i = 0; i < count;) - { - /* wait until the FIFO is not full */ - do - { - fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK) - >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == AMAZONASC_TXFIFO_FULL); - if (s[i] == '\0') - { - break; - } - if (s[i] == '\n') - { - amazon_writel('\r', AMAZON_ASC_TBUF); - do - { - fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & - ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF; - } while (fifocnt == AMAZONASC_TXFIFO_FULL); - } - amazon_writel(s[i], AMAZON_ASC_TBUF); - i++; - } - - local_irq_restore(flags); -} - -static void __init -amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) -{ - u_int lcr_h; - - lcr_h = amazon_readl(AMAZON_ASC_CON); - /* do this only if the ASC is turned on */ - if (lcr_h & ASCCON_R) { - u_int quot, div, fdiv, frac; - - *parity = 'n'; - if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR || - (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) { - if (lcr_h & ASCCON_ODD) - *parity = 'o'; - else - *parity = 'e'; - } - - if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR) - *bits = 7; - else - *bits = 8; - - quot = amazon_readl(AMAZON_ASC_BTR) + 1; - - /* this gets hairy if the fractional divider is used */ - if (lcr_h & ASCCON_FDE) - { - div = 1; - fdiv = amazon_readl(AMAZON_ASC_FDV); - if (fdiv == 0) - fdiv = 512; - frac = 512; - } - else - { - div = lcr_h & ASCCON_BRS ? 3 : 2; - fdiv = frac = 1; - } - /* - * This doesn't work exactly because we use integer - * math to calculate baud which results in rounding - * errors when we try to go from quot -> baud !! - * Try to make this work for both the fractional divider - * and the simple divider. Also try to avoid rounding - * errors using integer math. - */ - - *baud = frac * (port->uartclk / (div * 512 * 16 * quot)); - if (*baud > 1100 && *baud < 2400) - *baud = 1200; - if (*baud > 2300 && *baud < 4800) - *baud = 2400; - if (*baud > 4700 && *baud < 9600) - *baud = 4800; - if (*baud > 9500 && *baud < 19200) - *baud = 9600; - if (*baud > 19000 && *baud < 38400) - *baud = 19200; - if (*baud > 38400 && *baud < 57600) - *baud = 38400; - if (*baud > 57600 && *baud < 115200) - *baud = 57600; - if (*baud > 115200 && *baud < 230400) - *baud = 115200; - } -} - -static int __init amazonasc_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 115200; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - /* this assumes: CON.BRS = CON.FDE = 0 */ - if (uartclk == 0) - uartclk = amazon_get_fpi_hz(); - co->index = 0; - port = &amazonasc_ports[0]; - amazonasc_ports[0].uartclk = uartclk; - amazonasc_ports[0].type = PORT_AMAZONASC; - - if (options){ - uart_parse_options(options, &baud, &parity, &bits, &flow); - } - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver amazonasc_reg; -static struct console amazonasc_console = { - name: "ttyS", - write: amazonasc_console_write, - device: uart_console_device, - setup: amazonasc_console_setup, - flags: CON_PRINTBUFFER, - index: -1, - data: &amazonasc_reg, -}; - -static int __init amazonasc_console_init(void) -{ - register_console(&amazonasc_console); - return 0; -} -console_initcall(amazonasc_console_init); - -static struct uart_driver amazonasc_reg = { - .owner = THIS_MODULE, - .driver_name = "serial", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = UART_NR, - .cons = &amazonasc_console, -}; - -static int __init amazonasc_init(void) -{ - unsigned char res; - uart_register_driver(&amazonasc_reg); - res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]); - return res; -} - -static void __exit amazonasc_exit(void) -{ - uart_unregister_driver(&amazonasc_reg); -} - -module_init(amazonasc_init); -module_exit(amazonasc_exit); - -MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin"); -MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/adm6996.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/adm6996.h deleted file mode 100644 index 77cf4b131d..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/adm6996.h +++ /dev/null @@ -1,232 +0,0 @@ -/****************************************************************************** - Copyright (c) 2004, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. - ****************************************************************************** - Module : ifx_swdrv.h - Date : 2004-09-01 - Description : JoeLin - Remarks: - - *****************************************************************************/ - -#ifndef _ADM_6996_MODULE_H_ -#define _ADM_6996_MODULE_H_ - -#include - -#define ifx_printf(x) printk x - -/* command codes */ -#define ADM_SW_SMI_READ 0x02 -#define ADM_SW_SMI_WRITE 0x01 -#define ADM_SW_SMI_START 0x01 - -#define ADM_SW_EEPROM_WRITE 0x01 -#define ADM_SW_EEPROM_WRITE_ENABLE 0x03 -#define ADM_SW_EEPROM_WRITE_DISABLE 0x00 -#define EEPROM_TYPE 8 /* for 93C66 */ - -/* bit masks */ -#define ADM_SW_BIT_MASK_1 0x00000001 -#define ADM_SW_BIT_MASK_2 0x00000002 -#define ADM_SW_BIT_MASK_4 0x00000008 -#define ADM_SW_BIT_MASK_10 0x00000200 -#define ADM_SW_BIT_MASK_16 0x00008000 -#define ADM_SW_BIT_MASK_32 0x80000000 - -/* delay timers */ -#define ADM_SW_MDC_DOWN_DELAY 5 -#define ADM_SW_MDC_UP_DELAY 5 -#define ADM_SW_CS_DELAY 5 - -/* MDIO modes */ -#define ADM_SW_MDIO_OUTPUT 1 -#define ADM_SW_MDIO_INPUT 0 - -#define ADM_SW_MAX_PORT_NUM 5 -#define ADM_SW_MAX_VLAN_NUM 15 - -/* registers */ -#define ADM_SW_PORT0_CONF 0x1 -#define ADM_SW_PORT1_CONF 0x3 -#define ADM_SW_PORT2_CONF 0x5 -#define ADM_SW_PORT3_CONF 0x7 -#define ADM_SW_PORT4_CONF 0x8 -#define ADM_SW_PORT5_CONF 0x9 -#define ADM_SW_VLAN_MODE 0x11 -#define ADM_SW_MAC_LOCK 0x12 -#define ADM_SW_VLAN0_CONF 0x13 -#define ADM_SW_PORT0_PVID 0x28 -#define ADM_SW_PORT1_PVID 0x29 -#define ADM_SW_PORT2_PVID 0x2a -#define ADM_SW_PORT34_PVID 0x2b -#define ADM_SW_PORT5_PVID 0x2c -#define ADM_SW_PHY_RESET 0x2f -#define ADM_SW_MISC_CONF 0x30 -#define ADM_SW_BNDWDH_CTL0 0x31 -#define ADM_SW_BNDWDH_CTL1 0x32 -#define ADM_SW_BNDWDH_CTL_ENA 0x33 - -/* port modes */ -#define ADM_SW_PORT_FLOWCTL 0x1 /* 802.3x flow control */ -#define ADM_SW_PORT_AN 0x2 /* auto negotiation */ -#define ADM_SW_PORT_100M 0x4 /* 100M */ -#define ADM_SW_PORT_FULL 0x8 /* full duplex */ -#define ADM_SW_PORT_TAG 0x10 /* output tag on */ -#define ADM_SW_PORT_DISABLE 0x20 /* disable port */ -#define ADM_SW_PORT_TOS 0x40 /* TOS first */ -#define ADM_SW_PORT_PPRI 0x80 /* port based priority first */ -#define ADM_SW_PORT_MDIX 0x8000 /* auto MDIX on */ -#define ADM_SW_PORT_PVID_SHIFT 10 -#define ADM_SW_PORT_PVID_BITS 4 - -/* VLAN */ -#define ADM_SW_VLAN_PORT0 0x1 -#define ADM_SW_VLAN_PORT1 0x2 -#define ADM_SW_VLAN_PORT2 0x10 -#define ADM_SW_VLAN_PORT3 0x40 -#define ADM_SW_VLAN_PORT4 0x80 -#define ADM_SW_VLAN_PORT5 0x100 - - -/* GPIO 012 enabled, output mode */ -#define GPIO_ENABLEBITS 0x000700f8 - -/* - define AMAZON GPIO port to ADM6996 EEPROM interface - MDIO -> EEDI GPIO 16, AMAZON GPIO P1.0, bi-direction - MDC -> EESK GPIO 17, AMAZON GPIO P1.1, output only - MDCS -> EECS GPIO 18, AMAZON GPIO P1.2, output only - EEDO GPIO 15, AMAZON GPIO P0.15, do not need this one! */ - -#define GPIO_MDIO 1 //P1.0 -#define GPIO_MDC 2 //P1.1 -#define GPIO_MDCS 4 //P1.2 - -//joelin #define GPIO_MDIO 0 -//joelin #define GPIO_MDC 5 /* PORT 0 GPIO5 */ -//joelin #define GPIO_MDCS 6 /* PORT 0 GPIO6 */ - - -#define MDIO_INPUT 0x00000001 -#define MDIO_OUTPUT_EN 0x00010000 - - -/* type definitions */ -typedef unsigned char U8; -typedef unsigned short U16; -typedef unsigned int U32; - -typedef struct _REGRW_ -{ - unsigned int addr; - unsigned int value; - unsigned int mode; -}REGRW, *PREGRW; - -//joelin adm6996i -typedef struct _MACENTRY_ -{ - unsigned char mac_addr[6]; - unsigned long fid:4; - unsigned long portmap:6; - union { - unsigned long age_timer:9; - unsigned long info_ctrl:9; - } ctrl; - unsigned long occupy:1; - unsigned long info_type:1; - unsigned long bad:1; - unsigned long result:3;//000:command ok ,001:all entry used,010:Entry Not found ,011:try next entry ,101:command error - - }MACENTRY, *PMACENTRY; -typedef struct _PROTOCOLFILTER_ -{ - int protocol_filter_num;//[0~7] - int ip_p; //Value Compared with Protocol in IP Heade[7:0] - char action:2;//Action for protocol Filter . -//00 = Protocol Portmap is Default Output Ports. -//01 = Protocol Portmap is 6'b0. -//10 = Protocol Portmap is the CPU port if the incoming port -//is not the CPU port. But if the incoming port is the CPU port, then Type Portmap contains Default Output Ports, excluding the CPU port. - }PROTOCOLFILTER, *PPROTOCOLFILTER; - -//joelin adm6996i - -/* Santosh: for IGMP proxy/snooping */ - -//050614:fchang int adm_process_mac_table_request (unsigned int cmd, struct _MACENTRY_ *mac); -//050614:fchang int adm_process_protocol_filter_request (unsigned int cmd, struct _PROTOCOLFILTER_ *filter); - - -/* IOCTL keys */ -#define KEY_IOCTL_ADM_REGRW 0x01 -#define KEY_IOCTL_ADM_SW_REGRW 0x02 -#define KEY_IOCTL_ADM_SW_PORTSTS 0x03 -#define KEY_IOCTL_ADM_SW_INIT 0x04 -//for adm6996i-start -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD 0x05 -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL 0x06 -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT 0x07 -#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE 0x08 -#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD 0x09 -#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL 0x0a -#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET 0x0b - -//adm6996i #define KEY_IOCTL_MAX_KEY 0x05 -#define KEY_IOCTL_MAX_KEY 0x0c -//for adm6996i-end -/* IOCTL MAGIC */ -#define ADM_MAGIC ('a'|'d'|'m'|'t'|'e'|'k') - -/* IOCTL parameters */ -#define ADM_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_REGRW, REGRW) -#define ADM_SW_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_REGRW, REGRW) -#define ADM_SW_IOCTL_PORTSTS _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_PORTSTS, NULL) -#define ADM_SW_IOCTL_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_INIT, NULL) - - -//6996i-stat -#define ADM_SW_IOCTL_MACENTRY_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD,MACENTRY) -#define ADM_SW_IOCTL_MACENTRY_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL,MACENTRY) -#define ADM_SW_IOCTL_MACENTRY_GET_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT,MACENTRY) -#define ADM_SW_IOCTL_MACENTRY_GET_MORE _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE,MACENTRY) -#define ADM_SW_IOCTL_FILTER_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD,PROTOCOLFILTER) -#define ADM_SW_IOCTL_FILTER_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL,PROTOCOLFILTER) -#define ADM_SW_IOCTL_FILTER_GET _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET,PROTOCOLFILTER) - -//6996i-end - - -#define REG_READ 0x0 -#define REG_WRITE 0x1 - -/* undefine symbol */ -#define AMAZON_SW_REG(reg) *((volatile U32*)(reg)) -//#define GPIO0_INPUT_MASK 0 -//#define GPIO_conf0_REG 0x12345678 -//#define GPIO_SET_HI -//#define GPIO_SET_LOW - -#endif -/* _ADM_6996_MODULE_H_ */ diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon.h deleted file mode 100644 index d28bb418f1..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon.h +++ /dev/null @@ -1,1440 +0,0 @@ -#ifndef AMAZON_H -#define AMAZON_H -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ - -#define amazon_readl(a) readl(((u32*)(a))) -#define amazon_writel(a,b) writel(a, ((u32*)(b))) -#define amazon_writel_masked(a,b,c) writel((readl(((u32*)(a))) & ~b) | (c & b), ((u32*)(a))) - -/* check ADSL link status */ -#define AMAZON_CHECK_LINK - -/***********************************************************************/ -/* Module : WDT register address and bits */ -/***********************************************************************/ - -#define AMAZON_WDT (KSEG1+0x10100900) -/***********************************************************************/ - -/***Reset Request Register***/ -#define AMAZON_RST_REQ ((volatile u32*)(AMAZON_WDT+ 0x0010)) -#define AMAZON_RST_REQ_PLL (1 << 31) -#define AMAZON_RST_REQ_PCI_CORE (1 << 13) -#define AMAZON_RST_REQ_TPE (1 << 12) -#define AMAZON_RST_REQ_AFE (1 << 11) -#define AMAZON_RST_REQ_DMA (1 << 9) -#define AMAZON_RST_REQ_SWITCH (1 << 8) -#define AMAZON_RST_REQ_DFE (1 << 7) -#define AMAZON_RST_REQ_PHY (1 << 5) -#define AMAZON_RST_REQ_PCI (1 << 4) -#define AMAZON_RST_REQ_FPI (1 << 2) -#define AMAZON_RST_REQ_CPU (1 << 1) -#define AMAZON_RST_REQ_HRST (1 << 0) -#define AMAZON_RST_ALL (AMAZON_RST_REQ_PLL \ - |AMAZON_RST_REQ_PCI_CORE \ - |AMAZON_RST_REQ_TPE \ - |AMAZON_RST_REQ_AFE \ - |AMAZON_RST_REQ_DMA \ - |AMAZON_RST_REQ_SWITCH \ - |AMAZON_RST_REQ_DFE \ - |AMAZON_RST_REQ_PHY \ - |AMAZON_RST_REQ_PCI \ - |AMAZON_RST_REQ_FPI \ - |AMAZON_RST_REQ_CPU \ - |AMAZON_RST_REQ_HRST) - -/***Reset Status Register Power On***/ -#define AMAZON_RST_SR ((volatile u32*)(AMAZON_WDT+ 0x0014)) - -/***Watchdog Timer Control Register 0***/ -#define AMAZON_WDT_CON0 ((volatile u32*)(AMAZON_WDT+ 0x0020)) - -/***Watchdog Timer Control Register 1***/ -#define AMAZON_WDT_CON1 ((volatile u32*)(AMAZON_WDT+ 0x0024)) -#define AMAZON_WDT_CON1_WDTDR (1 << 3) -#define AMAZON_WDT_CON1_WDTIR (1 << 2) - -/***Watchdog Timer Status Register***/ -#define AMAZON_WDT_SR ((volatile u32*)(AMAZON_WDT+ 0x0028)) -#define AMAZON_WDT_SR_WDTTIM(value) (((( 1 << 16) - 1) & (value)) << 16) -#define AMAZON_WDT_SR_WDTPR (1 << 5) -#define AMAZON_WDT_SR_WDTTO (1 << 4) -#define AMAZON_WDT_SR_WDTDS (1 << 3) -#define AMAZON_WDT_SR_WDTIS (1 << 2) -#define AMAZON_WDT_SR_WDTOE (1 << 1) -#define AMAZON_WDT_SR_WDTAE (1 << 0) - -/***NMI Status Register***/ -#define AMAZON_WDT_NMISR ((volatile u32*)(AMAZON_WDT+ 0x002C)) -#define AMAZON_WDT_NMISR_NMIWDT (1 << 2) -#define AMAZON_WDT_NMISR_NMIPLL (1 << 1) -#define AMAZON_WDT_NMISR_NMIEXT (1 << 0) - -#define AMAZON_WDT_RST_MON ((volatile u32*)(AMAZON_WDT+ 0x0030)) - -/***********************************************************************/ -/* Module : MCD register address and bits */ -/***********************************************************************/ -#define AMAZON_MCD (KSEG1+0x1F106000) - -/***Manufacturer Identification Register***/ -#define AMAZON_MCD_MANID ((volatile u32*)(AMAZON_MCD+ 0x0024)) -#define AMAZON_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5) - -/***Chip Identification Register***/ -#define AMAZON_MCD_CHIPID ((volatile u32*)(AMAZON_MCD+ 0x0028)) -#define AMAZON_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) -#define AMAZON_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28) -#define AMAZON_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1)) -#define AMAZON_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12) -#define AMAZON_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1)) -#define AMAZON_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1) - -#define AMAZON_CHIPID_STANDARD 0x00EB -#define AMAZON_CHIPID_YANGTSE 0x00ED - -/***Redesign Tracing Identification Register***/ -#define AMAZON_MCD_RTID ((volatile u32*)(AMAZON_MCD+ 0x002C)) -#define AMAZON_MCD_RTID_LC (1 << 15) -#define AMAZON_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0) - - -/***********************************************************************/ -/* Module : CGU register address and bits */ -/***********************************************************************/ - -#define AMAZON_CGU (KSEG1+0x1F103000) -/***********************************************************************/ - -/***CGU Clock Divider Select Register***/ -#define AMAZON_CGU_DIV (AMAZON_CGU + 0x0000) -/***CGU PLL0 Status Register***/ -#define AMAZON_CGU_PLL0SR (AMAZON_CGU + 0x0004) -/***CGU PLL1 Status Register***/ -#define AMAZON_CGU_PLL1SR (AMAZON_CGU + 0x0008) -/***CGU Interface Clock Control Register***/ -#define AMAZON_CGU_IFCCR (AMAZON_CGU + 0x000c) -/***CGU Oscillator Control Register***/ -#define AMAZON_CGU_OSCCR (AMAZON_CGU + 0x0010) -/***CGU Memory Clock Delay Register***/ -#define AMAZON_CGU_MCDEL (AMAZON_CGU + 0x0014) -/***CGU CPU Clock Reduction Register***/ -#define AMAZON_CGU_CPUCRD (AMAZON_CGU + 0x0018) -/***CGU Test Register**/ -#define AMAZON_CGU_TST (AMAZON_CGU + 0x003c) - -/***********************************************************************/ -/* Module : PMU register address and bits */ -/***********************************************************************/ - -#define AMAZON_PMU AMAZON_CGU -/***********************************************************************/ - - -/***PMU Power Down Control Register***/ -#define AMAZON_PMU_PWDCR ((volatile u32*)(AMAZON_PMU+ 0x001c)) -#define AMAZON_PMU_PWDCR_TPE (1 << 13) -#define AMAZON_PMU_PWDCR_PLL (1 << 12) -#define AMAZON_PMU_PWDCR_XTAL (1 << 11) -#define AMAZON_PMU_PWDCR_EBU (1 << 10) -#define AMAZON_PMU_PWDCR_DFE (1 << 9) -#define AMAZON_PMU_PWDCR_SPI (1 << 8) -#define AMAZON_PMU_PWDCR_UART (1 << 7) -#define AMAZON_PMU_PWDCR_GPT (1 << 6) -#define AMAZON_PMU_PWDCR_DMA (1 << 5) -#define AMAZON_PMU_PWDCR_PCI (1 << 4) -#define AMAZON_PMU_PWDCR_SW (1 << 3) -#define AMAZON_PMU_PWDCR_IOR (1 << 2) -#define AMAZON_PMU_PWDCR_FPI (1 << 1) -#define AMAZON_PMU_PWDCR_EPHY (1 << 0) - -/***PMU Status Register***/ -#define AMAZON_PMU_SR ((volatile u32*)(AMAZON_PMU+ 0x0020)) -#define AMAZON_PMU_SR_TPE (1 << 13) -#define AMAZON_PMU_SR_PLL (1 << 12) -#define AMAZON_PMU_SR_XTAL (1 << 11) -#define AMAZON_PMU_SR_EBU (1 << 10) -#define AMAZON_PMU_SR_DFE (1 << 9) -#define AMAZON_PMU_SR_SPI (1 << 8) -#define AMAZON_PMU_SR_UART (1 << 7) -#define AMAZON_PMU_SR_GPT (1 << 6) -#define AMAZON_PMU_SR_DMA (1 << 5) -#define AMAZON_PMU_SR_PCI (1 << 4) -#define AMAZON_PMU_SR_SW (1 << 3) -#define AMAZON_PMU_SR_IOR (1 << 2) -#define AMAZON_PMU_SR_FPI (1 << 1) -#define AMAZON_PMU_SR_EPHY (1 << 0) - -/***********************************************************************/ -/* Module : BCU register address and bits */ -/***********************************************************************/ - -#define AMAZON_BCU (KSEG1+0x10100000) -/***********************************************************************/ - - -/***BCU Control Register (0010H)***/ -#define AMAZON_BCU_CON ((volatile u32*)(AMAZON_BCU+ 0x0010)) -#define AMAZON_BCU_CON_SPC(value) (((( 1 << 8) - 1) & (value)) << 24) -#define AMAZON_BCU_CON_SPE (1 << 19) -#define AMAZON_BCU_CON_PSE (1 << 18) -#define AMAZON_BCU_CON_DBG (1 << 16) -#define AMAZON_BCU_CON_TOUT(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***BCU Error Control Capture Register (0020H)***/ -#define AMAZON_BCU_ECON ((volatile u32*)(AMAZON_BCU+ 0x0020)) -#define AMAZON_BCU_ECON_TAG(value) (((( 1 << 4) - 1) & (value)) << 24) -#define AMAZON_BCU_ECON_RDN (1 << 23) -#define AMAZON_BCU_ECON_WRN (1 << 22) -#define AMAZON_BCU_ECON_SVM (1 << 21) -#define AMAZON_BCU_ECON_ACK(value) (((( 1 << 2) - 1) & (value)) << 19) -#define AMAZON_BCU_ECON_ABT (1 << 18) -#define AMAZON_BCU_ECON_RDY (1 << 17) -#define AMAZON_BCU_ECON_TOUT (1 << 16) -#define AMAZON_BCU_ECON_ERRCNT(value) (((( 1 << 16) - 1) & (value)) << 0) -#define AMAZON_BCU_ECON_OPC(value) (((( 1 << 4) - 1) & (value)) << 28) - -/***BCU Error Address Capture Register (0024 H)***/ -#define AMAZON_BCU_EADD ((volatile u32*)(AMAZON_BCU+ 0x0024)) -#define AMAZON_BCU_EADD_FPIADR - -/***BCU Error Data Capture Register (0028H)***/ -#define AMAZON_BCU_EDAT ((volatile u32*)(AMAZON_BCU+ 0x0028)) -#define AMAZON_BCU_EDAT_FPIDAT - -/***********************************************************************/ -/* Module : Switch register address and bits */ -/***********************************************************************/ - -#define AMAZON_SWITCH (KSEG1+0x10106000) -/***********************************************************************/ -#define AMAZON_SW_UN_DEST AMAZON_SWITCH+0x00 /*Unknown destination register*/ -#define AMAZON_SW_VLAN_CTRL AMAZON_SWITCH+0x04 /*VLAN control register*/ -#define AMAZON_SW_PS_CTL AMAZON_SWITCH+0x08 /*port status control register*/ -#define AMAZON_SW_COS_CTL AMAZON_SWITCH+0x0c /*Cos control register*/ -#define AMAZON_SW_VLAN_COS AMAZON_SWITCH+0x10 /*VLAN priority cos mapping register*/ -#define AMAZON_SW_DSCP_COS3 AMAZON_SWITCH+0x14 /*DSCP cos mapping register3*/ -#define AMAZON_SW_DSCP_COS2 AMAZON_SWITCH+0x18 /*DSCP cos mapping register2*/ -#define AMAZON_SW_DSCP_COS1 AMAZON_SWITCH+0x1c /*DSCP cos mapping register1*/ -#define AMAZON_SW_DSCP_COS0 AMAZON_SWITCH+0x20 /*DSCP cos mapping register*/ -#define AMAZON_SW_ARL_CTL AMAZON_SWITCH+0x24 /*ARL control register*/ -#define AMAZON_SW_PKT_LEN AMAZON_SWITCH+0x28 /*packet length register*/ -#define AMAZON_SW_CPU_ACTL AMAZON_SWITCH+0x2c /*CPU control register1*/ -#define AMAZON_SW_DATA1 AMAZON_SWITCH+0x30 /*CPU access control register1*/ -#define AMAZON_SW_DATA2 AMAZON_SWITCH+0x34 /*CPU access control register2*/ -#define AMAZON_SW_P2_PCTL AMAZON_SWITCH+0x38 /*Port2 control register*/ -#define AMAZON_SW_P0_TX_CTL AMAZON_SWITCH+0x3c /*port0 TX control register*/ -#define AMAZON_SW_P1_TX_CTL AMAZON_SWITCH+0x40 /*port 1 TX control register*/ -#define AMAZON_SW_P0_WM AMAZON_SWITCH+0x44 /*port 0 watermark control register*/ -#define AMAZON_SW_P1_WM AMAZON_SWITCH+0x48 /*port 1 watermark control register*/ -#define AMAZON_SW_P2_WM AMAZON_SWITCH+0x4c /*port 2 watermark control register*/ -#define AMAZON_SW_GBL_WM AMAZON_SWITCH+0x50 /*Global watermark register*/ -#define AMAZON_SW_PM_CTL AMAZON_SWITCH+0x54 /*PM control register*/ -#define AMAZON_SW_P2_CTL AMAZON_SWITCH+0x58 /*PMAC control register*/ -#define AMAZON_SW_P2_TX_IPG AMAZON_SWITCH+0x5c /*port2 TX IPG control register*/ -#define AMAZON_SW_P2_RX_IPG AMAZON_SWITCH+0x60 /*prot2 RX IPG control register*/ -#define AMAZON_SW_MDIO_ACC AMAZON_SWITCH+0x64 /*MDIO access register*/ -#define AMAZON_SW_EPHY AMAZON_SWITCH+0x68 /*Ethernet PHY register*/ -#define AMAZON_SW_MDIO_CFG AMAZON_SWITCH+0x6c /*MDIO configuration register*/ -#define AMAZON_SW_P0_RCV_DROP_CNT AMAZON_SWITCH+0x70 /*port0 receive drop counter */ -#define AMAZON_SW_P0_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x74 /*port0 receive frame error conter*/ -#define AMAZON_SW_P0_TX_COLL_CNT AMAZON_SWITCH+0x78 /*port0 transmit collision counter*/ -#define AMAZON_SW_P0_TX_DROP_CNT AMAZON_SWITCH+0x7c /*port1 transmit drop counter*/ -#define AMAZON_SW_P1_RCV_DROP_CNT AMAZON_SWITCH+0x80 /*port1 receive drop counter*/ -#define AMAZON_SW_P1_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x84 /*port1 receive error counter*/ -#define AMAZON_SW_P1_TX_COLL_CNT AMAZON_SWITCH+0x88 /*port1 transmit collision counter*/ -#define AMAZON_SW_P1_TX_DROP_CNT AMAZON_SWITCH+0x8c /*port1 transmit drop counter*/ - - - -/***********************************************************************/ -/* Module : SSC register address and bits */ -/***********************************************************************/ -#define AMAZON_SSC_BASE_ADD_0 (KSEG1+0x10100800) - -/*165001:henryhsu:20050603:Source add by Bing Tao*/ - -/*configuration/Status Registers in Bus Clock Domain*/ -#define AMAZON_SSC_CLC ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0000)) -#define AMAZON_SSC_ID ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0008)) -#define AMAZON_SSC_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0010)) -#define AMAZON_SSC_STATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0014)) -#define AMAZON_SSC_WHBSTATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0018)) -#define AMAZON_SSC_TB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0020)) -#define AMAZON_SSC_RB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0024)) -#define AMAZON_SSC_FSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0038)) - -/*Configuration/Status Registers in Kernel Clock Domain*/ -#define AMAZON_SSC_PISEL ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0004)) -#define AMAZON_SSC_RXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0030)) -#define AMAZON_SSC_TXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0034)) -#define AMAZON_SSC_BR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0040)) -#define AMAZON_SSC_BRSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0044)) -#define AMAZON_SSC_SFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0060)) -#define AMAZON_SSC_SFSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0064)) -#define AMAZON_SSC_GPOCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0070)) -#define AMAZON_SSC_GPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0074)) -#define AMAZON_SSC_WHBGPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0078)) -#define AMAZON_SSC_RXREQ ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0080)) -#define AMAZON_SSC_RXCNT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0084)) - -/*DMA Registers in Bus Clock Domain*/ -#define AMAZON_SSC_DMA_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00ec)) - -/*interrupt Node Registers in Bus Clock Domain*/ -#define AMAZON_SSC_IRNEN ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F4)) -#define AMAZON_SSC_IRNICR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00FC)) -#define AMAZON_SSC_IRNCR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F8)) - -/*165001*/ - -/***********************************************************************/ - - - -/***********************************************************************/ -/* Module : EBU register address and bits */ -/***********************************************************************/ - -#define AMAZON_EBU (KSEG1+0x10105300) -/***********************************************************************/ - - -/***EBU Clock Control Register***/ -#define AMAZON_EBU_CLC ((volatile u32*)(AMAZON_EBU+ 0x0000)) -#define AMAZON_EBU_CLC_DISS (1 << 1) -#define AMAZON_EBU_CLC_DISR (1 << 0) - -/***EBU Global Control Register***/ -#define AMAZON_EBU_CON ((volatile u32*)(AMAZON_EBU+ 0x0010)) -#define AMAZON_EBU_CON_DTACS(value) (((( 1 << 3) - 1) & (value)) << 20) -#define AMAZON_EBU_CON_DTARW(value) (((( 1 << 3) - 1) & (value)) << 16) -#define AMAZON_EBU_CON_TOUTC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_EBU_CON_ARBMODE(value) (((( 1 << 2) - 1) & (value)) << 6) -#define AMAZON_EBU_CON_ARBSYNC (1 << 5) -#define AMAZON_EBU_CON_1 (1 << 3) - -/***EBU Address Select Register 0***/ -#define AMAZON_EBU_ADDSEL0 ((volatile u32*)(AMAZON_EBU+ 0x0020)) -#define AMAZON_EBU_ADDSEL0_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) -#define AMAZON_EBU_ADDSEL0_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_EBU_ADDSEL0_MIRRORE (1 << 1) -#define AMAZON_EBU_ADDSEL0_REGEN (1 << 0) - -/***EBU Address Select Register 1***/ -#define AMAZON_EBU_ADDSEL1 ((volatile u32*)(AMAZON_EBU+ 0x0024)) -#define AMAZON_EBU_ADDSEL1_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) -#define AMAZON_EBU_ADDSEL1_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_EBU_ADDSEL1_MIRRORE (1 << 1) -#define AMAZON_EBU_ADDSEL1_REGEN (1 << 0) - -/***EBU Address Select Register 2***/ -#define AMAZON_EBU_ADDSEL2 ((volatile u32*)(AMAZON_EBU+ 0x0028)) -#define AMAZON_EBU_ADDSEL2_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) -#define AMAZON_EBU_ADDSEL2_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_EBU_ADDSEL2_MIRRORE (1 << 1) -#define AMAZON_EBU_ADDSEL2_REGEN (1 << 0) - -/***EBU Bus Configuration Register 0***/ -#define AMAZON_EBU_BUSCON0 ((volatile u32*)(AMAZON_EBU+ 0x0060)) -#define AMAZON_EBU_BUSCON0_WRDIS (1 << 31) -#define AMAZON_EBU_BUSCON0_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) -#define AMAZON_EBU_BUSCON0_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) -#define AMAZON_EBU_BUSCON0_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) -#define AMAZON_EBU_BUSCON0_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) -#define AMAZON_EBU_BUSCON0_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) -#define AMAZON_EBU_BUSCON0_WAITINV (1 << 19) -#define AMAZON_EBU_BUSCON0_SETUP (1 << 18) -#define AMAZON_EBU_BUSCON0_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) -#define AMAZON_EBU_BUSCON0_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) -#define AMAZON_EBU_BUSCON0_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) -#define AMAZON_EBU_BUSCON0_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) -#define AMAZON_EBU_BUSCON0_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) -#define AMAZON_EBU_BUSCON0_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 1***/ -#define AMAZON_EBU_BUSCON1 ((volatile u32*)(AMAZON_EBU+ 0x0064)) -#define AMAZON_EBU_BUSCON1_WRDIS (1 << 31) -#define AMAZON_EBU_BUSCON1_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) -#define AMAZON_EBU_BUSCON1_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) -#define AMAZON_EBU_BUSCON1_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) -#define AMAZON_EBU_BUSCON1_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) -#define AMAZON_EBU_BUSCON1_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) -#define AMAZON_EBU_BUSCON1_WAITINV (1 << 19) -#define AMAZON_EBU_BUSCON1_SETUP (1 << 18) -#define AMAZON_EBU_BUSCON1_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) -#define AMAZON_EBU_BUSCON1_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) -#define AMAZON_EBU_BUSCON1_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) -#define AMAZON_EBU_BUSCON1_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) -#define AMAZON_EBU_BUSCON1_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) -#define AMAZON_EBU_BUSCON1_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***EBU Bus Configuration Register 2***/ -#define AMAZON_EBU_BUSCON2 ((volatile u32*)(AMAZON_EBU+ 0x0068)) -#define AMAZON_EBU_BUSCON2_WRDIS (1 << 31) -#define AMAZON_EBU_BUSCON2_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) -#define AMAZON_EBU_BUSCON2_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) -#define AMAZON_EBU_BUSCON2_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) -#define AMAZON_EBU_BUSCON2_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) -#define AMAZON_EBU_BUSCON2_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) -#define AMAZON_EBU_BUSCON2_WAITINV (1 << 19) -#define AMAZON_EBU_BUSCON2_SETUP (1 << 18) -#define AMAZON_EBU_BUSCON2_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) -#define AMAZON_EBU_BUSCON2_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) -#define AMAZON_EBU_BUSCON2_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) -#define AMAZON_EBU_BUSCON2_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) -#define AMAZON_EBU_BUSCON2_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) -#define AMAZON_EBU_BUSCON2_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***********************************************************************/ -/* Module : SDRAM register address and bits */ -/***********************************************************************/ - -#define AMAZON_SDRAM (KSEG1+0x1F800000) -/***********************************************************************/ - - -/***MC Access Error Cause Register***/ -#define AMAZON_SDRAM_MC_ERRCAUSE ((volatile u32*)(AMAZON_SDRAM+ 0x0010)) -#define AMAZON_SDRAM_MC_ERRCAUSE_ERR (1 << 31) -#define AMAZON_SDRAM_MC_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_SDRAM_MC_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_ERRCAUSE_Res(value) (((( 1 << NaN) - 1) & (value)) << NaN) - -/***MC Access Error Address Register***/ -#define AMAZON_SDRAM_MC_ERRADDR ((volatile u32*)(AMAZON_SDRAM+ 0x0020)) -#define AMAZON_SDRAM_MC_ERRADDR_ADDR - -/***MC I/O General Purpose Register***/ -#define AMAZON_SDRAM_MC_IOGP ((volatile u32*)(AMAZON_SDRAM+ 0x0100)) -#define AMAZON_SDRAM_MC_IOGP_GPR6(value) (((( 1 << 4) - 1) & (value)) << 28) -#define AMAZON_SDRAM_MC_IOGP_GPR5(value) (((( 1 << 4) - 1) & (value)) << 24) -#define AMAZON_SDRAM_MC_IOGP_GPR4(value) (((( 1 << 4) - 1) & (value)) << 20) -#define AMAZON_SDRAM_MC_IOGP_GPR3(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_SDRAM_MC_IOGP_GPR2(value) (((( 1 << 4) - 1) & (value)) << 12) -#define AMAZON_SDRAM_MC_IOGP_CPS (1 << 11) -#define AMAZON_SDRAM_MC_IOGP_CLKDELAY(value) (((( 1 << 3) - 1) & (value)) << 8) -#define AMAZON_SDRAM_MC_IOGP_CLKRAT(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_IOGP_RDDEL(value) (((( 1 << 4) - 1) & (value)) << 0) - -/***MC Self Refresh Register***/ -#define AMAZON_SDRAM_MC_SELFRFSH ((volatile u32*)(AMAZON_SDRAM+ 0x01A0)) -#define AMAZON_SDRAM_MC_SELFRFSH_PWDS (1 << 1) -#define AMAZON_SDRAM_MC_SELFRFSH_PWD (1 << 0) -#define AMAZON_SDRAM_MC_SELFRFSH_Res(value) (((( 1 << 30) - 1) & (value)) << 2) - -/***MC Enable Register***/ -#define AMAZON_SDRAM_MC_CTRLENA ((volatile u32*)(AMAZON_SDRAM+ 0x0110)) -#define AMAZON_SDRAM_MC_CTRLENA_ENA (1 << 0) -#define AMAZON_SDRAM_MC_CTRLENA_Res(value) (((( 1 << 31) - 1) & (value)) << 1) - -/***MC Mode Register Setup Code***/ -#define AMAZON_SDRAM_MC_MRSCODE ((volatile u32*)(AMAZON_SDRAM+ 0x0120)) -#define AMAZON_SDRAM_MC_MRSCODE_UMC(value) (((( 1 << 5) - 1) & (value)) << 7) -#define AMAZON_SDRAM_MC_MRSCODE_CL(value) (((( 1 << 3) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_MRSCODE_WT (1 << 3) -#define AMAZON_SDRAM_MC_MRSCODE_BL(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***MC Configuration Data-word Width Register***/ -#define AMAZON_SDRAM_MC_CFGDW ((volatile u32*)(AMAZON_SDRAM+ 0x0130)) -#define AMAZON_SDRAM_MC_CFGDW_DW(value) (((( 1 << 4) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_CFGDW_Res(value) (((( 1 << 28) - 1) & (value)) << 4) - -/***MC Configuration Physical Bank 0 Register***/ -#define AMAZON_SDRAM_MC_CFGPB0 ((volatile u32*)(AMAZON_SDRAM+ 0x140)) -#define AMAZON_SDRAM_MC_CFGPB0_MCSEN0(value) (((( 1 << 4) - 1) & (value)) << 12) -#define AMAZON_SDRAM_MC_CFGPB0_BANKN0(value) (((( 1 << 4) - 1) & (value)) << 8) -#define AMAZON_SDRAM_MC_CFGPB0_ROWW0(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_CFGPB0_COLW0(value) (((( 1 << 4) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_CFGPB0_Res(value) (((( 1 << 16) - 1) & (value)) << 16) - -/***MC Latency Register***/ -#define AMAZON_SDRAM_MC_LATENCY ((volatile u32*)(AMAZON_SDRAM+ 0x0180)) -#define AMAZON_SDRAM_MC_LATENCY_TRP(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_SDRAM_MC_LATENCY_TRAS(value) (((( 1 << 4) - 1) & (value)) << 12) -#define AMAZON_SDRAM_MC_LATENCY_TRCD(value) (((( 1 << 4) - 1) & (value)) << 8) -#define AMAZON_SDRAM_MC_LATENCY_TDPL(value) (((( 1 << 4) - 1) & (value)) << 4) -#define AMAZON_SDRAM_MC_LATENCY_TDAL(value) (((( 1 << 4) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_LATENCY_Res(value) (((( 1 << 12) - 1) & (value)) << 20) - -/***MC Refresh Cycle Time Register***/ -#define AMAZON_SDRAM_MC_TREFRESH ((volatile u32*)(AMAZON_SDRAM+ 0x0190)) -#define AMAZON_SDRAM_MC_TREFRESH_TREF(value) (((( 1 << 13) - 1) & (value)) << 0) -#define AMAZON_SDRAM_MC_TREFRESH_Res(value) (((( 1 << 19) - 1) & (value)) << 13) - -/***********************************************************************/ -/* Module : GPTU register address and bits */ -/***********************************************************************/ - -#define AMAZON_GPTU (KSEG1+0x10100A00) -/***********************************************************************/ - - -/***GPT Clock Control Register***/ -#define AMAZON_GPTU_CLC ((volatile u32*)(AMAZON_GPTU+ 0x0000)) -#define AMAZON_GPTU_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_GPTU_CLC_DISS (1 << 1) -#define AMAZON_GPTU_CLC_DISR (1 << 0) - -/***GPT Timer 3 Control Register***/ -#define AMAZON_GPTU_T3CON ((volatile u32*)(AMAZON_GPTU+ 0x0014)) -#define AMAZON_GPTU_T3CON_T3RDIR (1 << 15) -#define AMAZON_GPTU_T3CON_T3CHDIR (1 << 14) -#define AMAZON_GPTU_T3CON_T3EDGE (1 << 13) -#define AMAZON_GPTU_T3CON_BPS1(value) (((( 1 << 2) - 1) & (value)) << 11) -#define AMAZON_GPTU_T3CON_T3OTL (1 << 10) -#define AMAZON_GPTU_T3CON_T3UD (1 << 7) -#define AMAZON_GPTU_T3CON_T3R (1 << 6) -#define AMAZON_GPTU_T3CON_T3M(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T3CON_T3I(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write Hardware Modified Timer 3 Control Register -If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT3CON ((volatile u32*)(AMAZON_GPTU+ 0x004C)) -#define AMAZON_GPTU_WHBT3CON_SETT3CHDIR (1 << 15) -#define AMAZON_GPTU_WHBT3CON_CLRT3CHDIR (1 << 14) -#define AMAZON_GPTU_WHBT3CON_SETT3EDGE (1 << 13) -#define AMAZON_GPTU_WHBT3CON_CLRT3EDGE (1 << 12) -#define AMAZON_GPTU_WHBT3CON_SETT3OTL (1 << 11) -#define AMAZON_GPTU_WHBT3CON_CLRT3OTL (1 << 10) - -/***GPT Timer 2 Control Register***/ -#define AMAZON_GPTU_T2CON ((volatile u32*)(AMAZON_GPTU+ 0x0010)) -#define AMAZON_GPTU_T2CON_TxRDIR (1 << 15) -#define AMAZON_GPTU_T2CON_TxCHDIR (1 << 14) -#define AMAZON_GPTU_T2CON_TxEDGE (1 << 13) -#define AMAZON_GPTU_T2CON_TxIRDIS (1 << 12) -#define AMAZON_GPTU_T2CON_TxRC (1 << 9) -#define AMAZON_GPTU_T2CON_TxUD (1 << 7) -#define AMAZON_GPTU_T2CON_TxR (1 << 6) -#define AMAZON_GPTU_T2CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T2CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Timer 4 Control Register***/ -#define AMAZON_GPTU_T4CON ((volatile u32*)(AMAZON_GPTU+ 0x0018)) -#define AMAZON_GPTU_T4CON_TxRDIR (1 << 15) -#define AMAZON_GPTU_T4CON_TxCHDIR (1 << 14) -#define AMAZON_GPTU_T4CON_TxEDGE (1 << 13) -#define AMAZON_GPTU_T4CON_TxIRDIS (1 << 12) -#define AMAZON_GPTU_T4CON_TxRC (1 << 9) -#define AMAZON_GPTU_T4CON_TxUD (1 << 7) -#define AMAZON_GPTU_T4CON_TxR (1 << 6) -#define AMAZON_GPTU_T4CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T4CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 2 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT2CON ((volatile u32*)(AMAZON_GPTU+ 0x0048)) -#define AMAZON_GPTU_WHBT2CON_SETTxCHDIR (1 << 15) -#define AMAZON_GPTU_WHBT2CON_CLRTxCHDIR (1 << 14) -#define AMAZON_GPTU_WHBT2CON_SETTxEDGE (1 << 13) -#define AMAZON_GPTU_WHBT2CON_CLRTxEDGE (1 << 12) - -/***GPT Write HW Modified Timer 4 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT4CON ((volatile u32*)(AMAZON_GPTU+ 0x0050)) -#define AMAZON_GPTU_WHBT4CON_SETTxCHDIR (1 << 15) -#define AMAZON_GPTU_WHBT4CON_CLRTxCHDIR (1 << 14) -#define AMAZON_GPTU_WHBT4CON_SETTxEDGE (1 << 13) -#define AMAZON_GPTU_WHBT4CON_CLRTxEDGE (1 << 12) - -/***GPT Capture Reload Register***/ -#define AMAZON_GPTU_CAPREL ((volatile u32*)(AMAZON_GPTU+ 0x0030)) -#define AMAZON_GPTU_CAPREL_CAPREL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 2 Register***/ -#define AMAZON_GPTU_T2 ((volatile u32*)(AMAZON_GPTU+ 0x0034)) -#define AMAZON_GPTU_T2_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 3 Register***/ -#define AMAZON_GPTU_T3 ((volatile u32*)(AMAZON_GPTU+ 0x0038)) -#define AMAZON_GPTU_T3_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 4 Register***/ -#define AMAZON_GPTU_T4 ((volatile u32*)(AMAZON_GPTU+ 0x003C)) -#define AMAZON_GPTU_T4_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 5 Register***/ -#define AMAZON_GPTU_T5 ((volatile u32*)(AMAZON_GPTU+ 0x0040)) -#define AMAZON_GPTU_T5_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Register***/ -#define AMAZON_GPTU_T6 ((volatile u32*)(AMAZON_GPTU+ 0x0044)) -#define AMAZON_GPTU_T6_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) - -/***GPT Timer 6 Control Register***/ -#define AMAZON_GPTU_T6CON ((volatile u32*)(AMAZON_GPTU+ 0x0020)) -#define AMAZON_GPTU_T6CON_T6SR (1 << 15) -#define AMAZON_GPTU_T6CON_T6CLR (1 << 14) -#define AMAZON_GPTU_T6CON_BPS2(value) (((( 1 << 2) - 1) & (value)) << 11) -#define AMAZON_GPTU_T6CON_T6OTL (1 << 10) -#define AMAZON_GPTU_T6CON_T6UD (1 << 7) -#define AMAZON_GPTU_T6CON_T6R (1 << 6) -#define AMAZON_GPTU_T6CON_T6M(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T6CON_T6I(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***GPT Write HW Modified Timer 6 Control Register If set - and clear bit are written concurrently with 1, the associated bit is not changed.***/ -#define AMAZON_GPTU_WHBT6CON ((volatile u32*)(AMAZON_GPTU+ 0x0054)) -#define AMAZON_GPTU_WHBT6CON_SETT6OTL (1 << 11) -#define AMAZON_GPTU_WHBT6CON_CLRT6OTL (1 << 10) - -/***GPT Timer 5 Control Register***/ -#define AMAZON_GPTU_T5CON ((volatile u32*)(AMAZON_GPTU+ 0x001C)) -#define AMAZON_GPTU_T5CON_T5SC (1 << 15) -#define AMAZON_GPTU_T5CON_T5CLR (1 << 14) -#define AMAZON_GPTU_T5CON_CI(value) (((( 1 << 2) - 1) & (value)) << 12) -#define AMAZON_GPTU_T5CON_T5CC (1 << 11) -#define AMAZON_GPTU_T5CON_CT3 (1 << 10) -#define AMAZON_GPTU_T5CON_T5RC (1 << 9) -#define AMAZON_GPTU_T5CON_T5UDE (1 << 8) -#define AMAZON_GPTU_T5CON_T5UD (1 << 7) -#define AMAZON_GPTU_T5CON_T5R (1 << 6) -#define AMAZON_GPTU_T5CON_T5M(value) (((( 1 << 3) - 1) & (value)) << 3) -#define AMAZON_GPTU_T5CON_T5I(value) (((( 1 << 3) - 1) & (value)) << 0) - - -/***********************************************************************/ -/* Module : ASC register address and bits */ -/***********************************************************************/ - -#define AMAZON_ASC (KSEG1+0x10100400) -/***********************************************************************/ - - -/***ASC Port Input Select Register***/ -#define AMAZON_ASC_PISEL (AMAZON_ASC+ 0x0004) -#define AMAZON_ASC_PISEL_RIS (1 << 0) - -/***ASC Control Register***/ -#define AMAZON_ASC_CON (AMAZON_ASC+ 0x0010) -#define AMAZON_ASC_CON_R (1 << 15) -#define AMAZON_ASC_CON_LB (1 << 14) -#define AMAZON_ASC_CON_BRS (1 << 13) -#define AMAZON_ASC_CON_ODD (1 << 12) -#define AMAZON_ASC_CON_FDE (1 << 11) -#define AMAZON_ASC_CON_OE (1 << 10) -#define AMAZON_ASC_CON_FE (1 << 9) -#define AMAZON_ASC_CON_PE (1 << 8) -#define AMAZON_ASC_CON_OEN (1 << 7) -#define AMAZON_ASC_CON_FEN (1 << 6) -#define AMAZON_ASC_CON_PENRXDI (1 << 5) -#define AMAZON_ASC_CON_REN (1 << 4) -#define AMAZON_ASC_CON_STP (1 << 3) -#define AMAZON_ASC_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0) - -/***ASC Write Hardware Modified Control Register***/ -#define AMAZON_ASC_WHBCON (AMAZON_ASC+ 0x0050) -#define AMAZON_ASC_WHBCON_SETOE (1 << 13) -#define AMAZON_ASC_WHBCON_SETFE (1 << 12) -#define AMAZON_ASC_WHBCON_SETPE (1 << 11) -#define AMAZON_ASC_WHBCON_CLROE (1 << 10) -#define AMAZON_ASC_WHBCON_CLRFE (1 << 9) -#define AMAZON_ASC_WHBCON_CLRPE (1 << 8) -#define AMAZON_ASC_WHBCON_SETREN (1 << 5) -#define AMAZON_ASC_WHBCON_CLRREN (1 << 4) - -/***ASC Baudrate Timer/Reload Register***/ -#define AMAZON_ASC_BTR (AMAZON_ASC+ 0x0014) -#define AMAZON_ASC_BTR_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0) - -/***ASC Fractional Divider Register***/ -#define AMAZON_ASC_FDV (AMAZON_ASC+ 0x0018) -#define AMAZON_ASC_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC IrDA Pulse Mode/Width Register***/ -#define AMAZON_ASC_PMW (AMAZON_ASC+ 0x001C) -#define AMAZON_ASC_PMW_IRPW (1 << 8) -#define AMAZON_ASC_PMW_PW_VALUE(value) (((( 1 << 8) - 1) & (value)) << 0) - -/***ASC Transmit Buffer Register***/ -#define AMAZON_ASC_TBUF (AMAZON_ASC+ 0x0020) -#define AMAZON_ASC_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Receive Buffer Register***/ -#define AMAZON_ASC_RBUF (AMAZON_ASC+ 0x0024) -#define AMAZON_ASC_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) - -/***ASC Autobaud Control Register***/ -#define AMAZON_ASC_ABCON (AMAZON_ASC+ 0x0030) -#define AMAZON_ASC_ABCON_RXINV (1 << 11) -#define AMAZON_ASC_ABCON_TXINV (1 << 10) -#define AMAZON_ASC_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8) -#define AMAZON_ASC_ABCON_FCDETEN (1 << 4) -#define AMAZON_ASC_ABCON_ABDETEN (1 << 3) -#define AMAZON_ASC_ABCON_ABSTEN (1 << 2) -#define AMAZON_ASC_ABCON_AUREN (1 << 1) -#define AMAZON_ASC_ABCON_ABEN (1 << 0) - -/***Receive FIFO Control Register***/ -#define AMAZON_ASC_RXFCON (AMAZON_ASC+ 0x0040) -#define AMAZON_ASC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define AMAZON_ASC_RXFCON_RXTMEN (1 << 2) -#define AMAZON_ASC_RXFCON_RXFFLU (1 << 1) -#define AMAZON_ASC_RXFCON_RXFEN (1 << 0) - -/***Transmit FIFO Control Register***/ -#define AMAZON_ASC_TXFCON (AMAZON_ASC+ 0x0044) -#define AMAZON_ASC_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define AMAZON_ASC_TXFCON_TXTMEN (1 << 2) -#define AMAZON_ASC_TXFCON_TXFFLU (1 << 1) -#define AMAZON_ASC_TXFCON_TXFEN (1 << 0) - -/***FIFO Status Register***/ -#define AMAZON_ASC_FSTAT (AMAZON_ASC+ 0x0048) -#define AMAZON_ASC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8) -#define AMAZON_ASC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0) - -/***ASC Write HW Modified Autobaud Control Register***/ -#define AMAZON_ASC_WHBABCON (AMAZON_ASC+ 0x0054) -#define AMAZON_ASC_WHBABCON_SETABEN (1 << 1) -#define AMAZON_ASC_WHBABCON_CLRABEN (1 << 0) - -/***ASC Autobaud Status Register***/ -#define AMAZON_ASC_ABSTAT (AMAZON_ASC+ 0x0034) -#define AMAZON_ASC_ABSTAT_DETWAIT (1 << 4) -#define AMAZON_ASC_ABSTAT_SCCDET (1 << 3) -#define AMAZON_ASC_ABSTAT_SCSDET (1 << 2) -#define AMAZON_ASC_ABSTAT_FCCDET (1 << 1) -#define AMAZON_ASC_ABSTAT_FCSDET (1 << 0) - -/***ASC Write HW Modified Autobaud Status Register***/ -#define AMAZON_ASC_WHBABSTAT (AMAZON_ASC+ 0x0058) -#define AMAZON_ASC_WHBABSTAT_SETDETWAIT (1 << 9) -#define AMAZON_ASC_WHBABSTAT_CLRDETWAIT (1 << 8) -#define AMAZON_ASC_WHBABSTAT_SETSCCDET (1 << 7) -#define AMAZON_ASC_WHBABSTAT_CLRSCCDET (1 << 6) -#define AMAZON_ASC_WHBABSTAT_SETSCSDET (1 << 5) -#define AMAZON_ASC_WHBABSTAT_CLRSCSDET (1 << 4) -#define AMAZON_ASC_WHBABSTAT_SETFCCDET (1 << 3) -#define AMAZON_ASC_WHBABSTAT_CLRFCCDET (1 << 2) -#define AMAZON_ASC_WHBABSTAT_SETFCSDET (1 << 1) -#define AMAZON_ASC_WHBABSTAT_CLRFCSDET (1 << 0) - -/***ASC Clock Control Register***/ -#define AMAZON_ASC_CLC (AMAZON_ASC+ 0x0000) -#define AMAZON_ASC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_ASC_CLC_DISS (1 << 1) -#define AMAZON_ASC_CLC_DISR (1 << 0) - -/***ASC IRNCR0 **/ -#define AMAZON_ASC_IRNCR0 (AMAZON_ASC+ 0x00FC) -/***ASC IRNCR1 **/ -#define AMAZON_ASC_IRNCR1 (AMAZON_ASC+ 0x00F8) -#define ASC_IRNCR_TIR 0x1 -#define ASC_IRNCR_RIR 0x2 -#define ASC_IRNCR_EIR 0x4 -/***********************************************************************/ -/* Module : DMA register address and bits */ -/***********************************************************************/ - -#define AMAZON_DMA (KSEG1+0x10103000) -/***********************************************************************/ -#define AMAZON_DMA_CH_ON AMAZON_DMA+0x28 -#define AMAZON_DMA_CH_RST AMAZON_DMA+0x2c -#define AMAZON_DMA_CH0_ISR AMAZON_DMA+0x30 -#define AMAZON_DMA_CH1_ISR AMAZON_DMA+0x34 -#define AMAZON_DMA_CH2_ISR AMAZON_DMA+0x38 -#define AMAZON_DMA_CH3_ISR AMAZON_DMA+0x3c -#define AMAZON_DMA_CH4_ISR AMAZON_DMA+0x40 -#define AMAZON_DMA_CH5_ISR AMAZON_DMA+0x44 -#define AMAZON_DMA_CH6_ISR AMAZON_DMA+0x48 -#define AMAZON_DMA_CH7_ISR AMAZON_DMA+0x4c -#define AMAZON_DMA_CH8_ISR AMAZON_DMA+0x50 -#define AMAZON_DMA_CH9_ISR AMAZON_DMA+0x54 -#define AMAZON_DMA_CH10_ISR AMAZON_DMA+0x58 -#define AMAZON_DMA_CH11_ISR AMAZON_DMA+0x5c -#define AMAZON_DMA_CH0_MSK AMAZON_DMA+0x60 -#define AMAZON_DMA_CH1_MSK AMAZON_DMA+0x64 -#define AMAZON_DMA_CH2_MSK AMAZON_DMA+0x68 -#define AMAZON_DMA_CH3_MSK AMAZON_DMA+0x6c -#define AMAZON_DMA_CH4_MSK AMAZON_DMA+0x70 -#define AMAZON_DMA_CH5_MSK AMAZON_DMA+0x74 -#define AMAZON_DMA_CH6_MSK AMAZON_DMA+0x78 -#define AMAZON_DMA_CH7_MSK AMAZON_DMA+0x7c -#define AMAZON_DMA_CH8_MSK AMAZON_DMA+0x80 -#define AMAZON_DMA_CH9_MSK AMAZON_DMA+0x84 -#define AMAZON_DMA_CH10_MSK AMAZON_DMA+0x88 -#define AMAZON_DMA_CH11_MSK AMAZON_DMA+0x8c -#define AMAZON_DMA_Desc_BA AMAZON_DMA+0x90 -#define AMAZON_DMA_CH0_DES_LEN AMAZON_DMA+0x94 -#define AMAZON_DMA_CH1_DES_LEN AMAZON_DMA+0x98 -#define AMAZON_DMA_CH2_DES_LEN AMAZON_DMA+0x9c -#define AMAZON_DMA_CH3_DES_LEN AMAZON_DMA+0xa0 -#define AMAZON_DMA_CH4_DES_LEN AMAZON_DMA+0xa4 -#define AMAZON_DMA_CH5_DES_LEN AMAZON_DMA+0xa8 -#define AMAZON_DMA_CH6_DES_LEN AMAZON_DMA+0xac -#define AMAZON_DMA_CH7_DES_LEN AMAZON_DMA+0xb0 -#define AMAZON_DMA_CH8_DES_LEN AMAZON_DMA+0xb4 -#define AMAZON_DMA_CH9_DES_LEN AMAZON_DMA+0xb8 -#define AMAZON_DMA_CH10_DES_LEN AMAZON_DMA+0xbc -#define AMAZON_DMA_CH11_DES_LEN AMAZON_DMA+0xc0 -#define AMAZON_DMA_CH1_DES_OFST AMAZON_DMA+0xc4 -#define AMAZON_DMA_CH2_DES_OFST AMAZON_DMA+0xc8 -#define AMAZON_DMA_CH3_DES_OFST AMAZON_DMA+0xcc -#define AMAZON_DMA_CH4_DES_OFST AMAZON_DMA+0xd0 -#define AMAZON_DMA_CH5_DES_OFST AMAZON_DMA+0xd4 -#define AMAZON_DMA_CH6_DES_OFST AMAZON_DMA+0xd8 -#define AMAZON_DMA_CH7_DES_OFST AMAZON_DMA+0xdc -#define AMAZON_DMA_CH8_DES_OFST AMAZON_DMA+0xe0 -#define AMAZON_DMA_CH9_DES_OFST AMAZON_DMA+0xe4 -#define AMAZON_DMA_CH10_DES_OFST AMAZON_DMA+0xe8 -#define AMAZON_DMA_CH11_DES_OFST AMAZON_DMA+0xec -#define AMAZON_DMA_SW_BL AMAZON_DMA+0xf0 -#define AMAZON_DMA_TPE_BL AMAZON_DMA+0xf4 -#define AMAZON_DMA_DPlus2FPI_BL AMAZON_DMA+0xf8 -#define AMAZON_DMA_GRX_BUF_LEN AMAZON_DMA+0xfc -#define AMAZON_DMA_DMA_ECON_REG AMAZON_DMA+0x100 -#define AMAZON_DMA_POLLING_REG AMAZON_DMA+0x104 -#define AMAZON_DMA_CH_WGT AMAZON_DMA+0x108 -#define AMAZON_DMA_TX_WGT AMAZON_DMA+0x10c -#define AMAZON_DMA_DPLus2FPI_CLASS AMAZON_DMA+0x110 -#define AMAZON_DMA_COMB_ISR AMAZON_DMA+0x114 - -//channel reset -#define SWITCH1_RST_MASK 0x83 /* Switch1 channel mask */ -#define SWITCH2_RST_MASK 0x10C /* Switch1 channel mask */ -#define TPE_RST_MASK 0x630 /* TPE channel mask */ -#define DPlus2FPI_RST_MASK 0x840 /* DPlusFPI channel mask */ - -//ISR -#define DMA_ISR_RDERR 0x20 -#define DMA_ISR_CMDCPT 0x10 -#define DMA_ISR_CPT 0x8 -#define DMA_ISR_DURR 0x4 -#define DMA_ISR_EOP 0x2 -#define DMA_DESC_BYTEOFF_SHIFT 23 - -#define DMA_POLLING_ENABLE 0x80000000 -#define DMA_POLLING_CNT 0x50 /*minimum 0x10, max 0xfff0*/ - -/***********************************************************************/ -/* Module : Debug register address and bits */ -/***********************************************************************/ - -#define AMAZON_DEBUG (KSEG1+0x1F106000) -/***********************************************************************/ - - -/***MCD Break System Control Register***/ -#define AMAZON_DEBUG_MCD_BSCR ((volatile u32*)(AMAZON_DEBUG+ 0x0000)) - -/***PMC Performance Counter Control Register0***/ -#define AMAZON_DEBUG_PMC_PCCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0010)) - -/***PMC Performance Counter Control Register1***/ -#define AMAZON_DEBUG_PMC_PCCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0014)) - -/***PMC Performance Counter Register0***/ -#define AMAZON_DEBUG_PMC_PCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0018)) - -/*165001:henryhsu:20050603:Source modified by Bing Tao*/ - -/***PMC Performance Counter Register1***/ -//#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0020)) -#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x001c)) - -/*165001*/ - - - -/***MCD Suspend Mode Control Register***/ -#define AMAZON_DEBUG_MCD_SMCR ((volatile u32*)(AMAZON_DEBUG+ 0x0024)) - -/***********************************************************************/ -/* Module : GPIO register address and bits */ -/***********************************************************************/ - -#define AMAZON_GPIO (KSEG1+0x10100B00) -/***********************************************************************/ - - -/***Port 0 Data Output Register (0010H)***/ -#define AMAZON_GPIO_P0_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0010)) - -/***Port 1 Data Output Register (0040H)***/ -#define AMAZON_GPIO_P1_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0040)) - -/***Port 0 Data Input Register (0014H)***/ -#define AMAZON_GPIO_P0_IN ((volatile u32*)(AMAZON_GPIO+ 0x0014)) - -/***Port 1 Data Input Register (0044H)***/ -#define AMAZON_GPIO_P1_IN ((volatile u32*)(AMAZON_GPIO+ 0x0044)) - -/***Port 0 Direction Register (0018H)***/ -#define AMAZON_GPIO_P0_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0018)) - -/***Port 1 Direction Register (0048H)***/ -#define AMAZON_GPIO_P1_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0048)) - -/***Port 0 Alternate Function Select Register 0 (001C H) ***/ -#define AMAZON_GPIO_P0_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x001C)) - -/***Port 1 Alternate Function Select Register 0 (004C H) ***/ -#define AMAZON_GPIO_P1_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x004C)) - -/***Port 0 Alternate Function Select Register 1 (0020 H) ***/ -#define AMAZON_GPIO_P0_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0020)) - -/***Port 1 Alternate Function Select Register 0 (0050 H) ***/ -#define AMAZON_GPIO_P1_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0050)) - -/***Port 0 Open Drain Control Register (0024H)***/ -#define AMAZON_GPIO_P0_OD ((volatile u32*)(AMAZON_GPIO+ 0x0024)) - -/***Port 1 Open Drain Control Register (0054H)***/ -#define AMAZON_GPIO_P1_OD ((volatile u32*)(AMAZON_GPIO+ 0x0054)) - -/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/ -#define AMAZON_GPIO_P0_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0028)) - -/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/ -#define AMAZON_GPIO_P1_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0058)) - -/***Port 0 Pull Up/Pull Down Select Register (002C H)***/ -#define AMAZON_GPIO_P0_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x002C)) - -/***Port 1 Pull Up/Pull Down Select Register (005C H)***/ -#define AMAZON_GPIO_P1_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x005C)) - -/***Port 0 Pull Up Device Enable Register (0030 H)***/ -#define AMAZON_GPIO_P0_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0030)) - -/***Port 1 Pull Up Device Enable Register (0060 H)***/ -#define AMAZON_GPIO_P1_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0060)) - -/***********************************************************************/ -/* Module : BIU register address and bits */ -/***********************************************************************/ - -#define AMAZON_BIU (KSEG1+0x1FA80000) -/***********************************************************************/ - - -/***BIU Identification Register***/ -#define AMAZON_BIU_ID ((volatile u32*)(AMAZON_BIU+ 0x0000)) -#define AMAZON_BIU_ID_ARCH (1 << 16) -#define AMAZON_BIU_ID_ID(value) (((( 1 << 8) - 1) & (value)) << 8) -#define AMAZON_BIU_ID_REV(value) (((( 1 << 8) - 1) & (value)) << 0) - -/***BIU Access Error Cause Register***/ -#define AMAZON_BIU_ERRCAUSE ((volatile u32*)(AMAZON_BIU+ 0x0100)) -#define AMAZON_BIU_ERRCAUSE_ERR (1 << 31) -#define AMAZON_BIU_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16) -#define AMAZON_BIU_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0) - -/***BIU Access Error Address Register***/ -#define AMAZON_BIU_ERRADDR ((volatile u32*)(AMAZON_BIU+ 0x0108)) -#define AMAZON_BIU_ERRADDR_ADDR - -/***********************************************************************/ -/* Module : ICU register address and bits */ -/***********************************************************************/ - -#define AMAZON_ICU (KSEG1+0x1F101000) -/***********************************************************************/ - -/***IM0 Interrupt Status Register***/ -#define AMAZON_ICU_IM0_ISR (AMAZON_ICU + 0x0010) -#define AMAZON_ICU_IM1_ISR (AMAZON_ICU + 0x0020) -#define AMAZON_ICU_IM2_ISR (AMAZON_ICU + 0x0030) -#define AMAZON_ICU_IM3_ISR (AMAZON_ICU + 0x0040) -#define AMAZON_ICU_IM4_ISR (AMAZON_ICU + 0x0050) - -/***IM0 Interrupt Enable Register***/ -#define AMAZON_ICU_IM0_IER (AMAZON_ICU + 0x0014) -#define AMAZON_ICU_IM1_IER (AMAZON_ICU + 0x0024) -#define AMAZON_ICU_IM2_IER (AMAZON_ICU + 0x0034) -#define AMAZON_ICU_IM3_IER (AMAZON_ICU + 0x0044) -#define AMAZON_ICU_IM4_IER (AMAZON_ICU + 0x0054) - -/***IM0 Interrupt Output Status Register***/ -#define AMAZON_ICU_IM0_IOSR (AMAZON_ICU + 0x0018) -#define AMAZON_ICU_IM1_IOSR (AMAZON_ICU + 0x0028) -#define AMAZON_ICU_IM2_IOSR (AMAZON_ICU + 0x0038) -#define AMAZON_ICU_IM3_IOSR (AMAZON_ICU + 0x0048) -#define AMAZON_ICU_IM4_IOSR (AMAZON_ICU + 0x0058) - -/***IM0 Interrupt Request Set Register***/ -#define AMAZON_ICU_IM0_IRSR (AMAZON_ICU + 0x001c) -#define AMAZON_ICU_IM1_IRSR (AMAZON_ICU + 0x002c) -#define AMAZON_ICU_IM2_IRSR (AMAZON_ICU + 0x003c) -#define AMAZON_ICU_IM3_IRSR (AMAZON_ICU + 0x004c) -#define AMAZON_ICU_IM4_IRSR (AMAZON_ICU + 0x005c) - -/***Interrupt Vector Value Register***/ -#define AMAZON_ICU_IM_VEC (AMAZON_ICU + 0x0060) - -/***Interrupt Vector Value Mask***/ -#define AMAZON_ICU_IM0_VEC_MASK 0x0000001f -#define AMAZON_ICU_IM1_VEC_MASK 0x000003e0 -#define AMAZON_ICU_IM2_VEC_MASK 0x00007c00 -#define AMAZON_ICU_IM3_VEC_MASK 0x000f8000 -#define AMAZON_ICU_IM4_VEC_MASK 0x01f00000 - -/***DMA Interrupt Mask Value***/ -#define AMAZON_DMA_H_MASK 0x00000fff - -/***External Interrupt Control Register***/ -#define AMAZON_ICU_EXTINTCR (AMAZON_ICU + 0x0000) -#define AMAZON_ICU_IRNICR (AMAZON_ICU + 0x0004) -#define AMAZON_ICU_IRNCR (AMAZON_ICU + 0x0008) -#define AMAZON_ICU_IRNEN (AMAZON_ICU + 0x000c) - -/***********************************************************************/ -/* Module : PCI/Card-BUS/PC-Card register address and bits */ -/***********************************************************************/ - -#define AMAZON_PCI (KSEG1+0x10105400) -#define AMAZON_PCI_CFG_BASE (KSEG1+0x11000000) -#define AMAZON_PCI_MEM_BASE (KSEG1+0x12000000) - -#define CLOCK_CONTROL AMAZON_PCI + 0x00000000 -#define ARB_CTRL_bit 1 -#define IDENTIFICATION AMAZON_PCI + 0x00000004 -#define SOFTRESET AMAZON_PCI + 0x00000010 -#define PCI_FPI_ERROR_ADDRESS AMAZON_PCI + 0x00000014 -#define FPI_PCI_ERROR_ADDRESS AMAZON_PCI + 0x00000018 -#define FPI_ERROR_TAG AMAZON_PCI + 0x0000001c -#define IRR AMAZON_PCI + 0x00000020 -#define IRA_IR AMAZON_PCI + 0x00000024 -#define IRM AMAZON_PCI + 0x00000028 -#define DMA_COMPLETE_BIT 0 -#define PCI_POWER_CHANGE_BIT 16 -#define PCI_MASTER0_BROKEN_INT_BIT 24 -#define PCI_MASTER1_BROKEN_INT_BIT 25 -#define PCI_MASTER2_BROKEN_INT_BIT 26 -#define EOI AMAZON_PCI + 0x0000002c -#define PCI_MODE AMAZON_PCI + 0x00000030 -#define PCI_MODE_cfgok_bit 24 -#define DEVICE_VENDOR_ID AMAZON_PCI + 0x00000034 -#define SUBSYSTEM_VENDOR_ID AMAZON_PCI + 0x00000038 -#define POWER_MANAGEMENT AMAZON_PCI + 0x0000003c -#define CLASS_CODE1 AMAZON_PCI + 0x00000040 -#define BAR11_MASK AMAZON_PCI + 0x00000044 -#define BAR12_MASK AMAZON_PCI + 0x00000048 -#define BAR13_MASK AMAZON_PCI + 0x0000004c -#define BAR14_MASK AMAZON_PCI + 0x00000050 -#define BAR15_MASK AMAZON_PCI + 0x00000054 -#define BAR16_MASK AMAZON_PCI + 0x00000058 -#define CARDBUS_CIS_POINTER1 AMAZON_PCI + 0x0000005c -#define SUBSYSTEM_ID1 AMAZON_PCI + 0x00000060 -#define PCI_ADDRESS_MAP_11 AMAZON_PCI + 0x00000064 -#define PCI_ADDRESS_MAP_12 AMAZON_PCI + 0x00000068 -#define PCI_ADDRESS_MAP_13 AMAZON_PCI + 0x0000006c -#define PCI_ADDRESS_MAP_14 AMAZON_PCI + 0x00000070 -#define PCI_ADDRESS_MAP_15 AMAZON_PCI + 0x00000074 -#define PCI_ADDRESS_MAP_16 AMAZON_PCI + 0x00000078 -#define FPI_SEGMENT_ENABLE AMAZON_PCI + 0x0000007c -#define CLASS_CODE2 AMAZON_PCI + 0x00000080 -#define BAR21_MASK AMAZON_PCI + 0x00000084 -#define BAR22_MASK AMAZON_PCI + 0x00000088 -#define BAR23_MASK AMAZON_PCI + 0x0000008c -#define BAR24_MASK AMAZON_PCI + 0x00000090 -#define BAR25_MASK AMAZON_PCI + 0x00000094 -#define BAR26_MASK AMAZON_PCI + 0x00000098 -#define CARDBUS_CIS_POINTER2 AMAZON_PCI + 0x0000009c -#define SUBSYSTEM_ID2 AMAZON_PCI + 0x000000a0 -#define PCI_ADDRESS_MAP_21 AMAZON_PCI + 0x000000a4 -#define PCI_ADDRESS_MAP_22 AMAZON_PCI + 0x000000a8 -#define PCI_ADDRESS_MAP_23 AMAZON_PCI + 0x000000ac -#define PCI_ADDRESS_MAP_24 AMAZON_PCI + 0x000000b0 -#define PCI_ADDRESS_MAP_25 AMAZON_PCI + 0x000000b4 -#define PCI_ADDRESS_MAP_26 AMAZON_PCI + 0x000000b8 -#define FPI_ADDRESS_MASK11LOW AMAZON_PCI + 0x000000bc -#define FPI_ADDRESS_MAP_0 AMAZON_PCI + 0x000000c0 -#define FPI_ADDRESS_MAP_1 AMAZON_PCI + 0x000000c4 -#define FPI_ADDRESS_MAP_2 AMAZON_PCI + 0x000000c8 -#define FPI_ADDRESS_MAP_3 AMAZON_PCI + 0x000000cc -#define FPI_ADDRESS_MAP_4 AMAZON_PCI + 0x000000d0 -#define FPI_ADDRESS_MAP_5 AMAZON_PCI + 0x000000d4 -#define FPI_ADDRESS_MAP_6 AMAZON_PCI + 0x000000d8 -#define FPI_ADDRESS_MAP_7 AMAZON_PCI + 0x000000dc -#define FPI_ADDRESS_MAP_11LOW AMAZON_PCI + 0x000000e0 -#define FPI_ADDRESS_MAP_11HIGH AMAZON_PCI + 0x000000e4 -#define FPI_BURST_LENGTH AMAZON_PCI + 0x000000e8 -#define SET_PCI_SERR AMAZON_PCI + 0x000000ec -#define DMA_FPI_START_ADDR AMAZON_PCI + 0x000000f0 -#define DMA_PCI_START_ADDR AMAZON_PCI + 0x000000f4 -#define DMA_TRANSFER_COUNT AMAZON_PCI + 0x000000f8 -#define DMA_CONTROL_STATUS AMAZON_PCI + 0x000000fc - -#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x0800 -#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1000 -#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1800 -#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2000 -#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2800 -#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3000 -#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3800 -#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4000 -#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4800 -#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5000 -#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5800 -#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6000 -#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6800 -#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7000 -#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7800 -#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0XF000 -#define EXT_PCI_BAR1_ADDR 0x10 -#define EXT_PCI_BAR2_ADDR 0x14 -#define EXT_PCI_BAR3_ADDR 0x18 -#define EXT_PCI_BAR4_ADDR 0x1C -#define EXT_PCI_BAR5_ADDR 0x20 -#define EXT_PCI_BAR6_ADDR 0x24 - -#define DEVICE_ID_VECDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x0 -#define STATUS_COMMAND_ADDR AMAZON_PCI_CFG_BASE + 0x4 -#define BUS_MASTER_ENABLE_BIT 2 -#define MEM_SPACE_ENABLE_BIT 1 -#define CLASS_CODE_REVISION_ADDR AMAZON_PCI_CFG_BASE + 0x8 -#define BIST_HEADER_TYPE_LATENCY_CAHCE_ADDR AMAZON_PCI_CFG_BASE + 0xC -#define BAR1_ADDR AMAZON_PCI_CFG_BASE + 0x10 -#define BAR2_ADDR AMAZON_PCI_CFG_BASE + 0x14 -#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18 -#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C -#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18 -#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C -#define BAR5_ADDR AMAZON_PCI_CFG_BASE + 0x20 -#define BAR6_ADDR AMAZON_PCI_CFG_BASE + 0x24 -#define CARDBUS_CIS_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x28 -#define SUBSYSTEM_ID_VENDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x2C -#define EXPANSION_ROM_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x30 -#define CAPABILITIES_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x34 -#define RESERVED_0x38 AMAZON_PCI_CFG_BASE + 0x38 -#define MAX_LAT_MIN_GNT_INT_PIN_LINE_ADDR AMAZON_PCI_CFG_BASE + 0x3C -#define POWER_MNGT_NEXT_POINTER_CAP_ID_ADDR AMAZON_PCI_CFG_BASE + 0x40 -#define POWER_MANAGEMENT_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x44 -#define RESERVED_0x48 AMAZON_PCI_CFG_BASE + 0x48 -#define RESERVED_0x4C AMAZON_PCI_CFG_BASE + 0x4C -#define ERROR_ADDR_PCI_FPI_ADDR AMAZON_PCI_CFG_BASE + 0x50 -#define ERROR_ADdR_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x54 -#define ERROR_TAG_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x58 -#define PCI_ARB_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x5C -#define INTERNAL_ARB_ENABLE_BIT 0 -#define ARB_SCHEME_BIT 1 -#define PCI_MASTER0_PRIOR_2BITS 2 -#define PCI_MASTER1_PRIOR_2BITS 4 -#define PCI_MASTER2_PRIOR_2BITS 6 -#define PCI_MASTER0_REQ_MASK_2BITS 8 -#define PCI_MASTER1_REQ_MASK_2BITS 10 -#define PCI_MASTER2_REQ_MASK_2BITS 12 -#define PCI_MASTER0_GNT_MASK_2BITS 14 -#define PCI_MASTER1_GNT_MASK_2BITS 16 -#define PCI_MASTER2_GNT_MASK_2BITS 18 -#define FPI_PCI_INT_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x60 -#define FPI_PCI_INT_ACK_ADDR AMAZON_PCI_CFG_BASE + 0x64 -#define FPI_PCI_INT_MASK_ADDR AMAZON_PCI_CFG_BASE + 0x68 -#define CARDBUS_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x6C -#define CARDBUS_CFRAME_ENABLE 0 - -#define CLOCK_CONTROL_default 0x00000000 -#define CLOCK_CONTROL_mask 0x00000003 - -#define IDENTIFICATION_default 0x0011C002 -#define IDENTIFICATION_mask 0x00000000 - -#define SOFTRESET_default 0x00000000 -// SOFTRESET bit 0 is writable but will be reset to 0 after software reset is over -#define SOFTRESET_mask 0x00000000 - -#define PCI_FPI_ERROR_ADDRESS_default 0xFFFFFFFF -#define PCI_FPI_ERROR_ADDRESS_mask 0x00000000 - -#define FPI_PCI_ERROR_ADDRESS_default 0xFFFFFFFF -#define FPI_PCI_ERROR_ADDRESS_mask 0x00000000 - -#define FPI_ERROR_TAG_default 0x0000000F -#define FPI_ERROR_TAG_mask 0x00000000 - -#define IRR_default 0x00000000 -#define IRR_mask 0x07013b2F - -#define IRA_IR_default 0x00000000 -#define IRA_IR_mask 0x07013b2F - -#define IRM_default 0x00000000 -#define IRM_mask 0xFFFFFFFF - -#define EOI_default 0x00000000 -#define EOI_mask 0x00000000 - -#define PCI_MODE_default 0x01000103 -#define PCI_MODE_mask 0x1107070F - -#define DEVICE_VENDOR_ID_default 0x000C15D1 -#define DEVICE_VENDOR_ID_mask 0xFFFFFFFF - -#define SUBSYSTEM_VENDOR_ID_default 0x000015D1 -#define SUBSYSTEM_VENDOR_ID_mask 0x0000FFFF - -#define POWER_MANAGEMENT_default 0x0000001B -#define POWER_MANAGEMENT_mask 0x0000001F - -#define CLASS_CODE1_default 0x00028000 -#define CLASS_CODE1_mask 0x00FFFFFF - -#define BAR11_MASK_default 0x0FF00008 -#define BAR11_MASK_mask 0x8FF00008 - -#define BAR12_MASK_default 0x80001800 -#define BAR12_MASK_mask 0x80001F08 - -#define BAR13_MASK_default 0x8FF00008 -#define BAR13_MASK_mask 0x8FF00008 - -#define BAR14_MASK_default 0x8F000000 -#define BAR14_MASK_mask 0x8FFFFF08 - -#define BAR15_MASK_default 0x80000000 -#define BAR15_MASK_mask 0x8FFFFF08 - -#define BAR16_MASK_default 0x80000001 -// bit 0 and bit 3 is mutually exclusive -#define BAR16_MASK_mask 0x8FFFFFF9 - -#define CARDBUS_CIS_POINTER1_default 0x00000000 -#define CARDBUS_CIS_POINTER1_mask 0x03FFFFFF - -#define SUBSYSTEM_ID1_default 0x0000000C -#define SUBSYSTEM_ID1_mask 0x0000FFFF - -#define PCI_ADDRESS_MAP_11_default 0x18000000 -#define PCI_ADDRESS_MAP_11_mask 0x7FFFFFF1 - -#define PCI_ADDRESS_MAP_12_default 0x18100000 -#define PCI_ADDRESS_MAP_12_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_13_default 0x18200000 -#define PCI_ADDRESS_MAP_13_mask 0x7FF00001 - -#define PCI_ADDRESS_MAP_14_default 0x70000000 -#define PCI_ADDRESS_MAP_14_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_15_default 0x00000001 -#define PCI_ADDRESS_MAP_15_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_16_default 0x60000000 -#define PCI_ADDRESS_MAP_16_mask 0x7FF00001 - -#define FPI_SEGMENT_ENABLE_default 0x000003FF -#define FPI_SEGMENT_ENABLE_mask 0x000003FF - -#define CLASS_CODE2_default 0x00FF0000 -#define CLASS_CODE2_mask 0x00FFFFFF - -#define BAR21_MASK_default 0x80000008 -#define BAR21_MASK_mask 0x8FFFFFF8 - -#define BAR22_MASK_default 0x80000008 -#define BAR22_MASK_mask 0x80001F08 - -#define BAR23_MASK_default 0x80000008 -#define BAR23_MASK_mask 0x8FF00008 - -#define BAR24_MASK_default 0x8FE00000 -#define BAR24_MASK_mask 0x8FFFFF08 - -#define BAR25_MASK_default 0x8FFFF000 -#define BAR25_MASK_mask 0x8FFFFF08 - -#define BAR26_MASK_default 0x8FFFFFE1 -#define BAR26_MASK_mask 0x8FFFFFF1 - -#define CARDBUS_CIS_POINTER2_default 0x00000000 -#define CARDBUS_CIS_POINTER2_mask 0x03FFFFFF - -#define SUBSYSTEM_ID2_default 0x0000000C -#define SUBSYSTEM_ID2_mask 0x0000FFFF - -#define PCI_ADDRESS_MAP_21_default 0x3FE00000 -#define PCI_ADDRESS_MAP_21_mask 0x7FFFFFF1 - -#define PCI_ADDRESS_MAP_22_default 0x68000000 -#define PCI_ADDRESS_MAP_22_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_23_default 0x20000000 -#define PCI_ADDRESS_MAP_23_mask 0x7FF00001 - -#define PCI_ADDRESS_MAP_24_default 0x70000001 -#define PCI_ADDRESS_MAP_24_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_25_default 0x78000001 -#define PCI_ADDRESS_MAP_25_mask 0x7FFFFF01 - -#define PCI_ADDRESS_MAP_26_default 0x20000000 -#define PCI_ADDRESS_MAP_26_mask 0x7FF00001 - -#define FPI_ADDRESS_MASK11LOW_default 0x00000000 -#define FPI_ADDRESS_MASK11LOW_mask 0x00070000 - -#define FPI_ADDRESS_MAP_0_default 0x00000000 -#define FPI_ADDRESS_MAP_0_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_1_default 0x10000000 -#define FPI_ADDRESS_MAP_1_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_2_default 0x20000000 -#define FPI_ADDRESS_MAP_2_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_3_default 0x30000000 -#define FPI_ADDRESS_MAP_3_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_4_default 0x40000000 -#define FPI_ADDRESS_MAP_4_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_5_default 0x50000000 -#define FPI_ADDRESS_MAP_5_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_6_default 0x60000000 -#define FPI_ADDRESS_MAP_6_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_7_default 0x70000000 -#define FPI_ADDRESS_MAP_7_mask 0xFFF00000 - -#define FPI_ADDRESS_MAP_11LOW_default 0xB0000000 -#define FPI_ADDRESS_MAP_11LOW_mask 0xFFFF0000 - -#define FPI_ADDRESS_MAP_11HIGH_default 0xB8000000 -#define FPI_ADDRESS_MAP_11HIGH_mask 0xFFF80000 - -#define FPI_BURST_LENGTH_default 0x00000000 -#define FPI_BURST_LENGTH_mask 0x00000303 - -#define SET_PCI_SERR_default 0x00000000 -#define SET_PCI_SERR_mask 0x00000000 - -#define DMA_FPI_START_ADDRESS_default 0x00000000 -#define DMA_FPI_START_ADDRESS_mask 0xFFFFFFFF - -#define DMA_PCI_START_ADDRESS_default 0x00000000 -#define DMA_PCI_START_ADDRESS_mask 0xFFFFFFFF - -#define DMA_TRANSFER_COUNT_default 0x00000000 -#define DMA_TRANSFER_COUNT_mask 0x0000FFFF - -#define DMA_CONTROL_STATUS_default 0x00000000 -#define DMA_CONTROL_STATUS_mask 0x00000000 // bit 0,1 is writable - -/***********************************************************************/ -#undef IKOS_MINI_BOOT //don't run a full booting -#ifdef CONFIG_USE_IKOS -#define CONFIG_USE_VENUS //Faster, 10M CPU and 192k baudrate -#ifdef CONFIG_USE_VENUS -#define IKOS_CPU_SPEED 10000000 -#else -#define IKOS_CPU_SPEED 180000 //IKOS is slow -#endif -#endif //CONFIG_USE_IKOS - -/* 165001:henryhsu:20050603:Source Modify form Bing Tao */ - -#if defined(CONFIG_NET_WIRELESS_SPURS) || defined(CONFIG_NET_WIRELESS_SPURS_MODULE) -#define EBU_PCI_SOFTWARE_ARBITOR -#endif - -#define AMAZON_B11 -#ifdef AMAZON_B11 -#define SWITCH_BUF_FPI_ADDR (0x10110000) -#define SWITCH_BUF_ADDR (KSEG1+SWITCH_BUF_FPI_ADDR) -#define SWITCH_BUF_SIZE (0x2800) -#define AMAZON_B11_CBM_QD_ADDR (SWITCH_BUF_ADDR+0x0) -#define AMAZON_B11_BOND_CELL_ADDR (SWITCH_BUF_ADDR+0x000) -#endif -#define AMAZON_REFERENCE_BOARD -//for AMAZON ATM bonding application -#ifdef AMAZON_REFERENCE_BOARD -#define GPIO_DETECT_LOW -#else -#undef GPIO_DETECT_LOW -#endif - -/* 165001 */ - -#undef AMAZON_IKOS_DEBUG_MSG -#undef AMAZON_INT_DEBUG_MSG -#undef AMAZON_ATM_DEBUG_MSG -#undef AMAZON_DMA_DEBUG_MSG -#undef AMAZON_SW_DEBUG_MSG -#undef AMAZON_WDT_DEBUG_MSG -#undef AMAZON_MTD_DEBUG_MSG -#undef AMAZON_SSC_DEBUG_MSG -#undef AMAZON_MEI_DEBUG_MSG - -#ifdef AMAZON_IKOS_DEBUG_MSG -#define AMAZON_IKOS_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args) -#else -#define AMAZON_IKOS_DMSG(fmt,args...) -#endif - -#ifdef AMAZON_WDT_DEBUG_MSG -#define AMAZON_WDT_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_WDT_DMSG(fm,args...) -#endif - -#ifdef AMAZON_SSC_DEBUG_MSG -#define AMAZON_SSC_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_SSC_DMSG(fm,args...) -#endif - -#ifdef AMAZON_DMA_DEBUG_MSG -#define AMAZON_DMA_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_DMA_DMSG(fm,args...) -#endif - -#ifdef AMAZON_ATM_DEBUG_MSG -#define AMAZON_TPE_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) -#else //not AMAZON_ATM_DEBUG -#define AMAZON_TPE_DMSG(fmt, args...) -#endif //AMAZON_ATM_DEBUG - -#ifdef AMAZON_SW_DEBUG_MSG -#define AMAZON_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_SW_DMSG(fmt,args...) -#endif - -#ifdef AMAZON_MTD_DEBUG_MSG -#define AMAZON_MTD_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) -#else -#define AMAZON_MTD_DMSG(fmt,args...) -#endif - -#ifdef AMAZON_INT_DEBUG_MSG -#define AMAZON_INT_DMSG(x...) printk(x) -#else -#define AMAZON_INT_DMSG(x...) -#endif - -#ifdef AMAZON_MEI_DEBUG_MSG -#define AMAZON_MEI_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args) -#else -#define AMAZON_MEI_DMSG(fmt,args...) -#endif - -#endif //AMAZON_H diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_dma.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_dma.h deleted file mode 100644 index 63ab5924e5..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_dma.h +++ /dev/null @@ -1,148 +0,0 @@ -#ifndef AMAZON_DMA_H -#define AMAZON_DMA_H - -#define RCV_INT 1 -#define TX_BUF_FULL_INT 2 -#define TRANSMIT_CPT_INT 4 - -#define QOS_DEFAULT_WGT 0x7fffffffUL; - - -enum attr_t{ - TX=0, - RX=1, - RESERVED=2, - DEFAULT=3, - -}; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -typedef struct rx_desc{ - u32 data_length:16; - volatile u32 reserved:7; - volatile u32 byte_offset:2; - volatile u32 Burst_length_offset:3; - volatile u32 EoP:1; - volatile u32 Res:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer; - /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/ -}_rx_desc; - - -typedef struct tx_desc{ - volatile u32 data_length:16; - volatile u32 reserved1:7; - volatile u32 byte_offset:5; - volatile u32 EoP:1; - volatile u32 SoP:1; - volatile u32 C:1; - volatile u32 OWN:1; - volatile u32 Data_Pointer;//fix me:should be 28 bits here -}_tx_desc; -#else //BIG -typedef struct rx_desc{ - union - { - struct - { - volatile u32 OWN :1; - volatile u32 C :1; - volatile u32 SoP :1; - volatile u32 EoP :1; - volatile u32 Burst_length_offset :3; - volatile u32 byte_offset :2; - volatile u32 reserve :7; - volatile u32 data_length :16; - }field; - - volatile u32 word; - }status; - - volatile u32 Data_Pointer; -}_rx_desc; - - -typedef struct tx_desc{ - union - { - struct - { - volatile u32 OWN :1; - volatile u32 C :1; - volatile u32 SoP :1; - volatile u32 EoP :1; - volatile u32 byte_offset :5; - volatile u32 reserved :7; - volatile u32 data_length :16; - }field; - - volatile u32 word; - }status; - - volatile u32 Data_Pointer; -}_tx_desc; - -#endif //ENDIAN - -struct dma_channel_info{ - /*filled by driver, optional*/ - enum attr_t attr;/*TX or RX*/ - int weight; - int desc_num; - int packet_size; - int control;/*on or off*/ - - int desc_base; - int status; -}; - -typedef struct dma_channel_info _dma_channel_info; - -struct dma_device_info{ - /*variables*/ - /*filled by driver, compulsary*/ - char device_name[15]; - enum attr_t attr;/*default or else*/ - int tx_burst_len; - int rx_burst_len; - - int logic_rx_chan_base; - int logic_tx_chan_base; - u8 on_ch_bit; - /*filled by driver, optional*/ - int weight; - int current_tx_chan; - int current_rx_chan; - int num_tx_chan; - int num_rx_chan; - struct dma_channel_info tx_chan[2]; - struct dma_channel_info rx_chan[4]; - - /*functions, optional*/ - u8* (*buffer_alloc)(int len,int* offset, void** opt); - int (*buffer_free)(u8* dataptr, void* opt); - int (*intr_handler)(struct dma_device_info* info, int status); - /*set by device, clear by dma*/ - int ack; - void * priv; /* used by peripheral driver only */ -}; -typedef struct dma_device_info _dma_device_info; - -int dma_device_register(struct dma_device_info* info); - -int dma_device_unregister(struct dma_device_info* info); - -int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt); - -int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt); - -int dma_device_update(struct dma_device_info* info); - -void dma_device_update_rx(struct dma_device_info* dma_dev); - -void dma_device_update_tx(struct dma_device_info* dma_dev); - -void register_handler_sim(int (*handler)(int)); -#endif /* AMAZON_DMA_H */ diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei.h deleted file mode 100644 index 6ac8ab310b..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei.h +++ /dev/null @@ -1,220 +0,0 @@ -#ifndef _AMAZON_MEI_H -#define _AMAZON_MEI_H -///////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#include "amazon_mei_app.h" - -#define AMAZON_MEI_DEBUG_ON -#define AMAZON_MEI_CMV_EXTRA - -#define AMAZON_MEI_MAJOR 106 - -/* -** Define where in ME Processor's memory map the Stratify chip lives -*/ -#define MEI_SPACE_ACCESS 0xB0100C00 - -#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) -//#define AMAZON_ADSL_IMAGESIZE 16*1024 // 16k * (32bits) - - -// Mailboxes -#define MSG_LENGTH 16 // x16 bits -#define YES_REPLY 1 -#define NO_REPLY 0 - -#define CMV_TIMEOUT 100 //jiffies -#define MIB_INTERVAL 10000 //msec - -/*** Bit definitions ***/ - -#define FALSE 0 -#define TRUE 1 -#define BIT0 1<<0 -#define BIT1 1<<1 -#define BIT2 1<<2 -#define BIT3 1<<3 -#define BIT4 1<<4 -#define BIT5 1<<5 -#define BIT6 1<<6 -#define BIT7 1<<7 -#define BIT8 1<<8 -#define BIT9 1<<9 -#define BIT10 1<<10 -#define BIT11 1<<11 -#define BIT12 1<<12 -#define BIT13 1<<13 -#define BIT14 1<<14 -#define BIT15 1<<15 -#define BIT16 1<<16 -#define BIT17 1<<17 -#define BIT18 1<<18 -#define BIT19 1<<19 -#define BIT20 1<<20 -#define BIT21 1<<21 -#define BIT22 1<<22 -#define BIT23 1<<23 -#define BIT24 1<<24 -#define BIT25 1<<25 -#define BIT26 1<<26 -#define BIT27 1<<27 -#define BIT28 1<<28 -#define BIT29 1<<29 -#define BIT30 1<<30 -#define BIT31 1<<31 - - -/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ -#define MEI_DATA_XFR (0x0000 + MEI_SPACE_ACCESS) -#define MEI_VERSION (0x0200 + MEI_SPACE_ACCESS) -#define ARC_GP_STAT (0x0204 + MEI_SPACE_ACCESS) -#define MEI_XFR_ADDR (0x020C + MEI_SPACE_ACCESS) -#define MEI_TO_ARC_INT (0x021C + MEI_SPACE_ACCESS) -#define ARC_TO_MEI_INT (0x0220 + MEI_SPACE_ACCESS) -#define ARC_TO_MEI_INT_MASK (0x0224 + MEI_SPACE_ACCESS) -#define MEI_DEBUG_WAD (0x0228 + MEI_SPACE_ACCESS) -#define MEI_DEBUG_RAD (0x022C + MEI_SPACE_ACCESS) -#define MEI_DEBUG_DATA (0x0230 + MEI_SPACE_ACCESS) -#define MEI_DEBUG_DEC (0x0234 + MEI_SPACE_ACCESS) -#define MEI_CONTROL (0x0238 + MEI_SPACE_ACCESS) -#define AT_CELLRDY_BC0 (0x023C + MEI_SPACE_ACCESS) -#define AT_CELLRDY_BC1 (0x0240 + MEI_SPACE_ACCESS) -#define AR_CELLRDY_BC0 (0x0244 + MEI_SPACE_ACCESS) -#define AR_CELLRDY_BC1 (0x0248 + MEI_SPACE_ACCESS) -#define AAI_ACCESS (0x024C + MEI_SPACE_ACCESS) -#define AAITXCB0 (0x0300 + MEI_SPACE_ACCESS) -#define AAITXCB1 (0x0304 + MEI_SPACE_ACCESS) -#define AAIRXCB0 (0x0308 + MEI_SPACE_ACCESS) -#define AAIRXCB1 (0x030C + MEI_SPACE_ACCESS) - - -// MEI_TO_ARC_INTERRUPT Register definitions -#define MEI_TO_ARC_INT1 BIT3 -#define MEI_TO_ARC_INT0 BIT2 -#define MEI_TO_ARC_CS_DONE BIT1 -#define MEI_TO_ARC_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT Register definitions -#define ARC_TO_MEI_INT1 BIT8 -#define ARC_TO_MEI_INT0 BIT7 -#define ARC_TO_MEI_CS_REQ BIT6 -#define ARC_TO_MEI_DBG_DONE BIT5 -#define ARC_TO_MEI_MSGACK BIT4 -#define ARC_TO_MEI_NO_ACCESS BIT3 -#define ARC_TO_MEI_CHECK_AAITX BIT2 -#define ARC_TO_MEI_CHECK_AAIRX BIT1 -#define ARC_TO_MEI_MSGAV BIT0 - -// ARC_TO_MEI_INTERRUPT_MASK Register definitions -#define GP_INT1_EN BIT8 -#define GP_INT0_EN BIT7 -#define CS_REQ_EN BIT6 -#define DBG_DONE_EN BIT5 -#define MSGACK_EN BIT4 -#define NO_ACC_EN BIT3 -#define AAITX_EN BIT2 -#define AAIRX_EN BIT1 -#define MSGAV_EN BIT0 - -// MEI_CONTROL Register definitions -#define INT_LEVEL BIT2 -#define SOFT_RESET BIT1 -#define HOST_MSTR BIT0 - -// MEI_DEBUG_DECODE Register definitions -#define MEI_DEBUG_DEC_MASK (0x3) -#define MEI_DEBUG_DEC_AUX_MASK (0x0) -#define MEI_DEBUG_DEC_DMP1_MASK (0x1) -#define MEI_DEBUG_DEC_DMP2_MASK (0x2) -#define MEI_DEBUG_DEC_CORE_MASK (0x3) - - -// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate -// page swap requests. -#define MEI_TO_ARC_MAILBOX (0x15FC0) -#define MEI_TO_ARC_MAILBOXR (0x15FEC) -#define ARC_TO_MEI_MAILBOX (0x15F90) -#define ARC_MEI_MAILBOXR (0x15FBC) - -// Codeswap request messages are indicated by setting BIT31 -#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) - -/* -** Swap page header -*/ -// Page must be loaded at boot time if size field has BIT31 set -#define BOOT_FLAG (BIT31) -#define BOOT_FLAG_MASK ~BOOT_FLAG - -// Swap page header describes size in 32-bit words, load location, and image offset -// for program and/or data segments -typedef struct _arc_swp_page_hdr -{ - u32 p_offset; // Offset bytes of progseg from beginning of image - u32 p_dest; // Destination addr of progseg on processor - u32 p_size; // Size in 32-bitwords of program segment - u32 d_offset; // Offset bytes of dataseg from beginning of image - u32 d_dest; // Destination addr of dataseg on processor - u32 d_size; // Size in 32-bitwords of data segment -}ARC_SWP_PAGE_HDR; - - -/* -** Swap image header -*/ -#define GET_PROG 0 // Flag used for program mem segment -#define GET_DATA 1 // Flag used for data mem segment - -// Image header contains size of image, checksum for image, and count of -// page headers. Following that are 'count' page headers followed by -// the code and/or data segments to be loaded -typedef struct _arc_img_hdr -{ - u32 size; // Size of binary image in bytes - u32 checksum; // Checksum for image - u32 count; // Count of swp pages in image - ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy -}ARC_IMG_HDR; - - - -/* -** Native size for the Stratiphy interface is 32-bits. All reads and writes -** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or -** byte data. Read routines are provided. Write routines are probably a bad idea, as the -** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle -** could very well have unintended results. -*/ -MEI_ERROR meiCMV(u16 *, int); // first arg is CMV to ARC, second to indicate whether need reply - -void meiLongwordWrite(u32 ul_address, u32 ul_data); -void meiLongwordRead(u32 ul_address, u32 *pul_data); - - -MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize); -MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize); - -MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize); -MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize); - -void meiPollForDbgDone(void); - -void meiMailboxInterruptsDisable(void); -void meiMailboxInterruptsEnable(void); - -MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize); -MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize); - -int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest); - -MEI_ERROR meiHaltArc(void); -MEI_ERROR meiRunArc(void); - -MEI_ERROR meiDownloadBootCode(void); - -MEI_ERROR meiForceRebootAdslModem(void); - -void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data); - -#endif - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app.h deleted file mode 100644 index 89700d9d76..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app.h +++ /dev/null @@ -1,54 +0,0 @@ -//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl - -#ifndef _AMAZON_MEI_APP_H -#define _AMAZON_MEI_APP_H - -///////////////////////////////////////////////////////////////////////////////////////////////////// - - // ioctl control -#define AMAZON_MEI_START 300 -#define AMAZON_MEI_REPLY 301 -#define AMAZON_MEI_NOREPLY 302 - -#define AMAZON_MEI_RESET 303 -#define AMAZON_MEI_REBOOT 304 -#define AMAZON_MEI_HALT 305 -#define AMAZON_MEI_CMV_WINHOST 306 -#define AMAZON_MEI_CMV_READ 307 -#define AMAZON_MEI_CMV_WRITE 308 -#define AMAZON_MEI_MIB_DAEMON 309 -#define AMAZON_MEI_SHOWTIME 310 -#define AMAZON_MEI_REMOTE 311 -#define AMAZON_MEI_READDEBUG 312 -#define AMAZON_MEI_WRITEDEBUG 313 -#define AMAZON_MEI_LOP 314 - -#define AMAZON_MEI_PCM_SETUP 315 -#define AMAZON_MEI_PCM_START_TIMER 316 -#define AMAZON_MEI_PCM_STOP_TIMER 317 -#define AMAZON_MEI_PCM_CHECK 318 -#define AMAZON_MEI_GET_EOC_LEN 319 -#define AMAZON_MEI_GET_EOC_DATA 320 -#define AMAZON_MEI_PCM_GETDATA 321 -#define AMAZON_MEI_PCM_GPIO 322 -#define AMAZON_MEI_EOC_SEND 323 -//MIB -#define AMAZON_MIB_LO_ATUC 324 -#define AMAZON_MIB_LO_ATUR 325 -#define AMAZON_MEI_DOWNLOAD 326 - -#define AMAZON_MEI_DEBUG_MODE 327 //509221:tc.chen -#define LOOP_DIAGNOSTIC_MODE_COMPLETE 328 - - -/*** Enums ***/ -typedef enum mei_error -{ - MEI_SUCCESS = 0, - MEI_FAILURE = -1, - MEI_MAILBOX_FULL = -2, - MEI_MAILBOX_EMPTY = -3, - MEI_MAILBOX_TIMEOUT = -4, -}MEI_ERROR; - -#endif diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h deleted file mode 100644 index d98f60b171..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h +++ /dev/null @@ -1,1169 +0,0 @@ -// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics - -#ifndef __AMAZON_MEI_APP_IOCTL_H -#define __AMAZON_MEI_APP_IOCTL_H - -#ifdef __KERNEL__ -#include "amazon_mei_ioctl.h" -#endif - -/* Interface Name */ -//#define INTERFACE_NAME - -/* adslLineTable constants */ -#define GET_ADSL_LINE_CODE 1 - -/* adslAtucPhysTable constants */ -#define GET_ADSL_ATUC_PHY 4 - -/* adslAturPhysTable constants */ -#define GET_ADSL_ATUR_PHY 10 - -/* adslAtucChanTable constants */ -#define GET_ADSL_ATUC_CHAN_INFO 15 - -/* adslAturChanTable constants */ -#define GET_ADSL_ATUR_CHAN_INFO 18 - -/* adslAtucPerfDataTable constants */ -#define GET_ADSL_ATUC_PERF_DATA 21 - -/* adslAturPerfDataTable constants */ -#define GET_ADSL_ATUR_PERF_DATA 40 - -/* adslAtucIntervalTable constants */ -#define GET_ADSL_ATUC_INTVL_INFO 60 - -/* adslAturIntervalTable constants */ -#define GET_ADSL_ATUR_INTVL_INFO 65 - -/* adslAtucChanPerfDataTable constants */ -#define GET_ADSL_ATUC_CHAN_PERF_DATA 70 - -/* adslAturChanPerfDataTable constants */ -#define GET_ADSL_ATUR_CHAN_PERF_DATA 90 - -/* adslAtucChanIntervalTable constants */ -#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110 - -/* adslAturChanIntervalTable constants */ -#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115 - -/* adslLineAlarmConfProfileTable constants */ -#define GET_ADSL_ALRM_CONF_PROF 120 -#define SET_ADSL_ALRM_CONF_PROF 121 - -/* adslAturTrap constants */ -#define ADSL_ATUR_TRAPS 135 - -////////////////// RFC-3440 ////////////// - -#ifdef AMAZON_MEI_MIB_RFC3440 -/* adslLineExtTable */ -#define GET_ADSL_ATUC_LINE_EXT 201 -#define SET_ADSL_ATUC_LINE_EXT 203 - -/* adslAtucPerfDateExtTable */ -#define GET_ADSL_ATUC_PERF_DATA_EXT 205 - -/* adslAtucIntervalExtTable */ -#define GET_ADSL_ATUC_INTVL_EXT_INFO 221 - -/* adslAturPerfDataExtTable */ -#define GET_ADSL_ATUR_PERF_DATA_EXT 225 - -/* adslAturIntervalExtTable */ -#define GET_ADSL_ATUR_INTVL_EXT_INFO 233 - -/* adslAlarmConfProfileExtTable */ -#define GET_ADSL_ALRM_CONF_PROF_EXT 235 -#define SET_ADSL_ALRM_CONF_PROF_EXT 236 - -/* adslAturExtTrap */ -#define ADSL_ATUR_EXT_TRAPS 240 - -#endif - -// 603221:tc.chen start -/* The following constants are added to support the WEB related ADSL Statistics */ - -/* adslLineStatus constants */ -#define GET_ADSL_LINE_STATUS 245 - -/* adslLineRate constants */ -#define GET_ADSL_LINE_RATE 250 - -/* adslLineInformation constants */ -#define GET_ADSL_LINE_INFO 255 - -/* adslNearEndPerformanceStats constants */ -#define GET_ADSL_NEAREND_STATS 270 - -/* adslFarEndPerformanceStats constants */ -#define GET_ADSL_FAREND_STATS 290 - -// 603221:tc.chen end - -/* Loop diagnostics mode of the ADSL line related constants */ -#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 295 -#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 296 -#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 299 - -/* Sub-carrier related parameters */ -#define GET_ADSL_ATUC_SUBCARRIER_STATS 297 -#define GET_ADSL_ATUR_SUBCARRIER_STATS 298 -#define GET_ADSL_LINE_INIT_STATS 150 -#define GET_ADSL_POWER_SPECTRAL_DENSITY 151 - - -/////////////////////////////////////////////////////////// -// makeCMV(Opcode, Group, Address, Index, Size, Data) - -/* adslLineCode Flags */ -#define LINE_CODE_FLAG 0x1 /* BIT 0th position */ - -/* adslAtucPhysTable Flags */ -#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data) -#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data) - -#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ -#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data) - -#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ -#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data) - -#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */ - -#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */ -#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data) - -#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */ -#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data) - - -/* adslAturPhysTable Flags */ -#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data) -#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data) - -#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ -#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data) - -#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ -#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data) - -#define ATUR_SNRMGN_FLAG 0x8 -#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data) - -#define ATUR_ATTN_FLAG 0x10 -#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data) - -#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */ - -#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */ -#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data) - -#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */ -#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data) - -/* adslAtucChanTable Flags */ -#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ -#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data) - -#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ -#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data) - -#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ - -/* adslAturChanTable Flags */ -#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ -#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data) - -#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ -#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data) - -#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ - -#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */ - -/* adslAtucPerfDataTable Flags */ -#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data) -#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */ -#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data) -#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */ -#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ -#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ -#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ -#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ -#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */ -#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */ -#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ -#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ -#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */ -#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */ -#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ -#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ -#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */ -#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */ - -/* adslAturPerfDataTable Flags */ -#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ -#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */ -#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */ -#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data) -#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */ -#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data) -#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ -#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ -#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ -#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ -#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */ -#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */ -#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ -#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ -#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */ -#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */ -#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ -#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ -#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */ -#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */ - -/* adslAtucIntervalTable Flags */ -#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ -#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */ -#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */ -#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */ -#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ - -/* adslAturIntervalTable Flags */ -#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ -#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */ -#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */ -#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */ -#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ - -/* adslAtucChanPerfDataTable Flags */ -#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ -#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ -#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ -#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ -#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ -#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ -#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ -#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ -#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ -#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ -#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/ -#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ -#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ -#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ -#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ -#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ -#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */ -#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ -#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ - - -/* adslAturChanPerfDataTable Flags */ -#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ -#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) -#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) -#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ -#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) -#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) -#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ -#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data) -#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data) -#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ -#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data) -#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data) -#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ -#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ -#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ -#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ -#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ -#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ -#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ -#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ -#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ -#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ -#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ -#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ -#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ -#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ -#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */ -#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ -#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ - -/* adslAtucChanIntervalTable Flags */ -#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */ -#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ -#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ -#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ -#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ -#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ - -/* adslAturChanIntervalTable Flags */ -#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */ -#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ -#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ -#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ -#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ -#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ - -/* adslLineAlarmConfProfileTable Flags */ -#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */ -#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */ -#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */ -#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */ -#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */ -#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */ -#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */ -#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */ -#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */ -#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */ -#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */ -#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */ -#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */ -#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */ -#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */ -#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */ -#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */ - - -/* adslAturTraps Flags */ -#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */ -#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */ -#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */ -#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */ -#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */ -#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */ -#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */ - -//RFC- 3440 FLAG DEFINITIONS - -#ifdef AMAZON_MEI_MIB_RFC3440 -/* adslLineExtTable flags */ -#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */ -#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data) -#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */ -#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data) -#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data) -#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */ -#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data) -#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */ -#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data) - -/* adslAtucPerfDataExtTable flags */ -#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */ -#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) -#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */ -#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) -#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */ -#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data) -#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */ -#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data) -#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */ -#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */ -#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */ -#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */ -#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */ -#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */ -#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */ -#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */ -#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */ -#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */ -#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */ -#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */ - -/* adslAturPerfDataExtTable */ -#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */ -#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data) -#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */ -#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data) -#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */ -#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */ -#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */ -#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */ -#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */ -#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */ - -/* adslAutcIntervalExtTable flags */ -#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */ -#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */ -#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */ -#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */ - -/* adslAturIntervalExtTable */ -#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */ -#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */ - -/* adslAlarmConfProfileExtTable */ -#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */ -#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */ -#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */ -#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */ -#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */ - -/* adslAturExtTraps */ -#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */ -#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */ -#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */ -#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */ -#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */ - -// 603221:tc.chen start -/* adslLineStatus Flags */ -#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */ -#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) -#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */ -#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data) -#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */ -#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data) -#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */ -#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data) - -/* adslLineRate Flags */ -#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */ -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data) - - -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data) - -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data) -#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data) - -#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */ -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data) - - -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data) - -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data) -#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data) - -#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */ -#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data) - -#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */ -#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data) - -/* adslLineInformation Flags */ -#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */ -#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data) -#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data) -#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */ -#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data) -#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data) -#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */ -#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data) -#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */ -#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data) -#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */ -#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data) -#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */ -#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data) -#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */ -#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data) -#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data) -#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data) -#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */ -#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data) -#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */ -#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data) -#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */ -#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data) - -/* adslNearEndPerformanceStats Flags */ -#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) -#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) -#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */ -#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data) -#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */ -#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */ -#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */ -#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */ -#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */ -#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */ -#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data) -#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data) -#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data) -#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data) -#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */ -#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data) -#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */ -#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data) -#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */ -#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data) -#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */ -#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data) -#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */ -#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data) -#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */ -#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data) -#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data) -#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */ - -/* adslFarEndPerformanceStats Flags */ -#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data) -#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */ -#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */ -#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */ -#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */ -#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */ -#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data) -#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data) -#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */ -#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data) -#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data) -#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */ -#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data) -#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */ -#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data) -#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */ -#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data) -#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */ -#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data) -#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */ -#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data) -#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */ -#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data) -#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data) -#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */ -// 603221:tc.chen end -/* TR-69 related additional parameters - defines */ -/* Defines for struct adslATURSubcarrierInfo */ -#define NEAREND_HLINSC 0x1 -#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data) -#define NEAREND_HLINPS 0x2 -#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data) -#define NEAREND_HLOGMT 0x4 -#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data) -#define NEAREND_HLOGPS 0x8 -#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data) -#define NEAREND_QLNMT 0x10 -#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data) -#define NEAREND_QLNPS 0x20 -#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data) -#define NEAREND_SNRMT 0x40 -#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data) -#define NEAREND_SNRPS 0x80 -#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data) -#define NEAREND_BITPS 0x100 -#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data) -#define NEAREND_GAINPS 0x200 -#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data) - -/* Defines for struct adslATUCSubcarrierInfo */ -#define FAREND_HLINSC 0x1 -#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 0, 1, data) -#define FAREND_HLINPS 0x2 -#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data) -#define FAREND_HLOGMT 0x4 -#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data) -#define FAREND_HLOGPS 0x8 -#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data) -#define FAREND_QLNMT 0x10 -#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data) -#define FAREND_QLNPS 0x20 -#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data) -#define FAREND_SNRMT 0x40 -#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data) -#define FAREND_SNRPS 0x80 -#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data) -#define FAREND_BITPS 0x100 -#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data) -#define FAREND_GAINPS 0x200 -#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data) - - -// GET_ADSL_POWER_SPECTRAL_DENSITY -#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data) -#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data) -#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data) -#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data) -#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data) -#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data) - - -#endif -/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing - -#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val)) -// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer - -#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0) -// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer - - -#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit)) -// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer - - -////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION - -//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type. - // -#define u32 unsigned int -#define u16 unsigned short -#define s16 short -#define u8 unsigned char - - -typedef u32 AdslPerfTimeElapsed; -typedef u32 AdslPerfPrevDayCount; -typedef u32 PerfCurrentCount; -typedef u32 PerfIntervalCount; -typedef u32 AdslPerfCurrDayCount; - - -//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry) - -typedef struct adslLineTableEntry { - int ifIndex; - int adslLineCode; - u8 flags; -} adslLineTableEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslLineExtTableEntry { - int ifIndex; - u16 adslLineTransAtucCap; - u16 adslLineTransAtucConfig; - u16 adslLineTransAtucActual; - int adslLineGlitePowerState; - u32 flags; -}adslLineExtTableEntry; -#endif -//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry) - -typedef struct adslVendorId { - u16 country_code; - u_char provider_id[4]; /* Ascii characters */ - u_char revision_info[2]; -}adslVendorId; - - -typedef struct adslAtucPhysEntry { - int ifIndex; - char serial_no[32]; - union { - char vendor_id[16]; - adslVendorId vendor_info; - } vendor_id; - - char version_no[16]; - u32 status; - int outputPwr; - u32 attainableRate; - u8 flags; -} adslAtucPhysEntry; - - -//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry) - -typedef struct adslAturPhysEntry { - int ifIndex; - char serial_no[32]; - union { - char vendor_id[16]; - adslVendorId vendor_info; - } vendor_id; - char version_no[16]; - int SnrMgn; - u32 Attn; - u32 status; - int outputPwr; - u32 attainableRate; - u8 flags; -} adslAturPhysEntry; - - -//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo) - -typedef struct adslAtucChanInfo { - int ifIndex; - u32 interleaveDelay; - u32 currTxRate; - u32 prevTxRate; - u8 flags; -} adslAtucChanInfo; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo) - -typedef struct adslAturChanInfo { - int ifIndex; - u32 interleaveDelay; - u32 currTxRate; - u32 prevTxRate; - u32 crcBlkLen; - u8 flags; -} adslAturChanInfo; - - -//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry) - -typedef struct atucPerfDataEntry -{ - int ifIndex; - u32 adslAtucPerfLofs; - u32 adslAtucPerfLoss; - u32 adslAtucPerfESs; - u32 adslAtucPerfInits; - int adslAtucPerfValidIntervals; - int adslAtucPerfInvalidIntervals; - AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAtucPerfCurr15MinLofs; - PerfCurrentCount adslAtucPerfCurr15MinLoss; - PerfCurrentCount adslAtucPerfCurr15MinESs; - PerfCurrentCount adslAtucPerfCurr15MinInits; - AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs; - AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss; - AdslPerfCurrDayCount adslAtucPerfCurr1DayESs; - AdslPerfCurrDayCount adslAtucPerfCurr1DayInits; - int adslAtucPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss; - AdslPerfPrevDayCount adslAtucPerfPrev1DayESs; - AdslPerfPrevDayCount adslAtucPerfPrev1DayInits; - u32 flags; -} atucPerfDataEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct atucPerfDataExtEntry - { - int ifIndex; - u32 adslAtucPerfStatFastR; - u32 adslAtucPerfStatFailedFastR; - u32 adslAtucPerfStatSesL; - u32 adslAtucPerfStatUasL; - u32 adslAtucPerfCurr15MinFastR; - u32 adslAtucPerfCurr15MinFailedFastR; - u32 adslAtucPerfCurr15MinSesL; - u32 adslAtucPerfCurr15MinUasL; - u32 adslAtucPerfCurr1DayFastR; - u32 adslAtucPerfCurr1DayFailedFastR; - u32 adslAtucPerfCurr1DaySesL; - u32 adslAtucPerfCurr1DayUasL; - u32 adslAtucPerfPrev1DayFastR; - u32 adslAtucPerfPrev1DayFailedFastR; - u32 adslAtucPerfPrev1DaySesL; - u32 adslAtucPerfPrev1DayUasL; - u32 flags; -} atucPerfDataExtEntry; - -#endif -//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry) - -typedef struct aturPerfDataEntry -{ - int ifIndex; - u32 adslAturPerfLofs; - u32 adslAturPerfLoss; - u32 adslAturPerfLprs; - u32 adslAturPerfESs; - int adslAturPerfValidIntervals; - int adslAturPerfInvalidIntervals; - AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAturPerfCurr15MinLofs; - PerfCurrentCount adslAturPerfCurr15MinLoss; - PerfCurrentCount adslAturPerfCurr15MinLprs; - PerfCurrentCount adslAturPerfCurr15MinESs; - AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAturPerfCurr1DayLofs; - AdslPerfCurrDayCount adslAturPerfCurr1DayLoss; - AdslPerfCurrDayCount adslAturPerfCurr1DayLprs; - AdslPerfCurrDayCount adslAturPerfCurr1DayESs; - int adslAturPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAturPerfPrev1DayLofs; - AdslPerfPrevDayCount adslAturPerfPrev1DayLoss; - AdslPerfPrevDayCount adslAturPerfPrev1DayLprs; - AdslPerfPrevDayCount adslAturPerfPrev1DayESs; - u32 flags; -} aturPerfDataEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct aturPerfDataExtEntry - { - int ifIndex; - u32 adslAturPerfStatSesL; - u32 adslAturPerfStatUasL; - u32 adslAturPerfCurr15MinSesL; - u32 adslAturPerfCurr15MinUasL; - u32 adslAturPerfCurr1DaySesL; - u32 adslAturPerfCurr1DayUasL; - u32 adslAturPerfPrev1DaySesL; - u32 adslAturPerfPrev1DayUasL; - u32 flags; -} aturPerfDataExtEntry; -#endif -//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo) - -typedef struct adslAtucIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount intervalLOF; - PerfIntervalCount intervalLOS; - PerfIntervalCount intervalES; - PerfIntervalCount intervalInits; - int intervalValidData; - u8 flags; -} adslAtucIntvlInfo; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslAtucInvtlExtInfo - { - int ifIndex; - int IntervalNumber; - u32 adslAtucIntervalFastR; - u32 adslAtucIntervalFailedFastR; - u32 adslAtucIntervalSesL; - u32 adslAtucIntervalUasL; - u32 flags; -} adslAtucInvtlExtInfo; -#endif -//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo) - -typedef struct adslAturIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount intervalLOF; - PerfIntervalCount intervalLOS; - PerfIntervalCount intervalLPR; - PerfIntervalCount intervalES; - int intervalValidData; - u8 flags; -} adslAturIntvlInfo; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslAturInvtlExtInfo - { - int ifIndex; - int IntervalNumber; - u32 adslAturIntervalSesL; - u32 adslAturIntervalUasL; - u32 flags; -} adslAturInvtlExtInfo; -#endif -//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry) - -typedef struct atucChannelPerfDataEntry -{ - int ifIndex; - u32 adslAtucChanReceivedBlks; - u32 adslAtucChanTransmittedBlks; - u32 adslAtucChanCorrectedBlks; - u32 adslAtucChanUncorrectBlks; - int adslAtucChanPerfValidIntervals; - int adslAtucChanPerfInvalidIntervals; - AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks; - PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks; - AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks; - AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks; - int adslAtucChanPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks; - AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks; - u32 flags; -}atucChannelPerfDataEntry; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry) - -typedef struct aturChannelPerfDataEntry -{ - int ifIndex; - u32 adslAturChanReceivedBlks; - u32 adslAturChanTransmittedBlks; - u32 adslAturChanCorrectedBlks; - u32 adslAturChanUncorrectBlks; - int adslAturChanPerfValidIntervals; - int adslAturChanPerfInvalidIntervals; - AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed; - PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks; - PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks; - AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks; - AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks; - int adslAturChanPerfPrev1DayMoniSecs; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks; - AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks; - u32 flags; -} aturChannelPerfDataEntry; - - -//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo) - -typedef struct adslAtucChanIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount chanIntervalRecvdBlks; - PerfIntervalCount chanIntervalXmitBlks; - PerfIntervalCount chanIntervalCorrectedBlks; - PerfIntervalCount chanIntervalUncorrectBlks; - int intervalValidData; - u8 flags; -} adslAtucChanIntvlInfo; - - -//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo) - -typedef struct adslAturChanIntvlInfo { - int ifIndex; - int IntervalNumber; - PerfIntervalCount chanIntervalRecvdBlks; - PerfIntervalCount chanIntervalXmitBlks; - PerfIntervalCount chanIntervalCorrectedBlks; - PerfIntervalCount chanIntervalUncorrectBlks; - int intervalValidData; - u8 flags; -} adslAturChanIntvlInfo; - - -//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) -//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) - -typedef struct adslLineAlarmConfProfileEntry - { - unsigned char adslLineAlarmConfProfileName[32]; - int adslAtucThresh15MinLofs; - int adslAtucThresh15MinLoss; - int adslAtucThresh15MinESs; - u32 adslAtucThreshFastRateUp; - u32 adslAtucThreshInterleaveRateUp; - u32 adslAtucThreshFastRateDown; - u32 adslAtucThreshInterleaveRateDown; - int adslAtucInitFailureTrapEnable; - int adslAturThresh15MinLofs; - int adslAturThresh15MinLoss; - int adslAturThresh15MinLprs; - int adslAturThresh15MinESs; - u32 adslAturThreshFastRateUp; - u32 adslAturThreshInterleaveRateUp; - u32 adslAturThreshFastRateDown; - u32 adslAturThreshInterleaveRateDown; - int adslLineAlarmConfProfileRowStatus; - u32 flags; -} adslLineAlarmConfProfileEntry; - -#ifdef AMAZON_MEI_MIB_RFC3440 -typedef struct adslLineAlarmConfProfileExtEntry - { - u8 adslLineAlarmConfProfileExtName[32]; - u32 adslAtucThreshold15MinFailedFastR; - u32 adslAtucThreshold15MinSesL; - u32 adslAtucThreshold15MinUasL; - u32 adslAturThreshold15MinSesL; - u32 adslAturThreshold15MinUasL; - u32 flags; -} adslLineAlarmConfProfileExtEntry; -#endif -//TRAPS - -// 603221:tc.chen start -/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */ -typedef struct adslLineStatus - { - int adslModemStatus; - u32 adslModeSelected; - int adslAtucThresh15MinESs; - int adslTrellisCodeEnable; - int adslLatency; - u8 flags; - } adslLineStatusInfo; - -typedef struct adslLineRate - { - u32 adslDataRateds; - u32 adslDataRateus; - u32 adslATTNDRds; - u32 adslATTNDRus; - u8 flags; - } adslLineRateInfo; - -typedef struct adslLineInfo - { - u32 adslInterleaveDepthds; - u32 adslInterleaveDepthus; - u32 adslLATNds; - u32 adslLATNus; - u32 adslSATNds; - u32 adslSATNus; - int adslSNRMds; - int adslSNRMus; - int adslACATPds; - int adslACATPus; - u32 flags; - } adslLineInfo; - -typedef struct adslNearEndPerfStats - { - u32 adslSuperFrames; - u32 adslneLOS; - u32 adslneLOF; - u32 adslneLPR; - u32 adslneNCD; - u32 adslneLCD; - u32 adslneCRC; - u32 adslneRSCorr; - u32 adslneFECS; - u32 adslneES; - u32 adslneSES; - u32 adslneLOSS; - u32 adslneUAS; - u32 adslneHECErrors; - u32 flags; - } adslNearEndPerfStats; - -typedef struct adslFarEndPerfStats - { - u32 adslfeLOS; - u32 adslfeLOF; - u32 adslfeLPR; - u32 adslfeNCD; - u32 adslfeLCD; - u32 adslfeCRC; - u32 adslfeRSCorr; - u32 adslfeFECS; - u32 adslfeES; - u32 adslfeSES; - u32 adslfeLOSS; - u32 adslfeUAS; - u32 adslfeHECErrors; - u32 flags; - } adslFarEndPerfStats; -// 603221:tc.chen end - -/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */ -typedef struct adslATURSubcarrierInfo { - int ifindex; - u16 HLINSCds; - u16 HLINpsds[1024];/* Even index = real part; Odd Index - = imaginary part for each tone */ - u16 HLOGMTds; - u16 HLOGpsds[512]; - u16 QLNMTds; - u16 QLNpsds[512]; - u16 SNRMTds; - u16 SNRpsds[512]; - u16 BITpsds[512]; - u16 GAINpsds[512]; - u16 flags; -}adslATURSubcarrierInfo; - -typedef struct adslATUCSubcarrierInfo { - int ifindex; - u16 HLINSCus; - u16 HLINpsus[128];/* Even index = real part; Odd Index - = imaginary part for each tone */ - u16 HLOGMTus; - u16 HLOGpsus[64]; - u16 QLNMTus; - u16 QLNpsus[64]; - u16 SNRMTus; - u16 SNRpsus[64]; - u16 BITpsus[64]; - u16 GAINpsus[64]; - u16 flags; -}adslATUCSubcarrierInfo; - -#ifndef u_int16 -#define u_int16 u16 -#endif - -typedef struct adslInitStats { - u_int16 FullInitializationCount; - u_int16 FailedFullInitializationCount; - u_int16 LINIT_Errors; - u_int16 Init_Timeouts; -}adslInitStats; - -typedef struct adslPowerSpectralDensity { - int ACTPSDds; - int ACTPSDus; -}adslPowerSpectralDensity; - - -//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags) -typedef union structpts { - adslLineTableEntry * adslLineTableEntry_pt; - adslAtucPhysEntry * adslAtucPhysEntry_pt; - adslAturPhysEntry * adslAturPhysEntry_pt; - adslAtucChanInfo * adslAtucChanInfo_pt; - adslAturChanInfo * adslAturChanInfo_pt; - atucPerfDataEntry * atucPerfDataEntry_pt; - aturPerfDataEntry * aturPerfDataEntry_pt; - adslAtucIntvlInfo * adslAtucIntvlInfo_pt; - adslAturIntvlInfo * adslAturIntvlInfo_pt; - atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt; - aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt; - adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt; - adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt; - adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt; - // RFC 3440 - - #ifdef AMAZON_MEI_MIB_RFC3440 - adslLineExtTableEntry * adslLineExtTableEntry_pt; - atucPerfDataExtEntry * atucPerfDataExtEntry_pt; - adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt; - aturPerfDataExtEntry * aturPerfDataExtEntry_pt; - adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt; - adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt; - #endif -// 603221:tc.chen start - adslLineStatusInfo * adslLineStatusInfo_pt; - adslLineRateInfo * adslLineRateInfo_pt; - adslLineInfo * adslLineInfo_pt; - adslNearEndPerfStats * adslNearEndPerfStats_pt; - adslFarEndPerfStats * adslFarEndPerfStats_pt; -// 603221:tc.chen end - adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt; - adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt; - adslPowerSpectralDensity * adslPowerSpectralDensity_pt; -}structpts; - -#endif /* ] __AMAZON_MEI_APP_IOCTL_H */ diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h deleted file mode 100644 index 02a150eac4..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_mei_ioctl.h +++ /dev/null @@ -1,757 +0,0 @@ -//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl -#ifndef _AMAZON_MEI_IOCTL_H -#define _AMAZON_MEI_IOCTL_H - -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define PCM_BUFF_SIZE 1024 //bytes -// interrupt numbers - -#ifndef _AMAZON_ADSL_APP - -typedef struct pcm_data_struct{ - u16 S; - u16 temp; - u16 LSW; - u16 MSW; - u16 len; - u16 rdindex; - u16 wrindex; - u16 flow; - - int finish; - u8 buff[PCM_BUFF_SIZE]; - int point; -}pcm_data_struct; - -typedef struct amazon_clreoc_pkt{ - struct list_head list; - u8 * command; //point to clreoc command data - int len; //command length -}amazon_clreoc_pkt; - -// Number of intervals -#define INTERVAL_NUM 192 //two days -typedef struct amazon_mei_mib{ - struct list_head list; - struct timeval start_time; //start of current interval - - int AtucPerfLof; - int AtucPerfLos; - int AtucPerfEs; - int AtucPerfInit; - - int AturPerfLof; - int AturPerfLos; - int AturPerfLpr; - int AturPerfEs; - - int AturChanPerfRxBlk; - int AturChanPerfTxBlk; - int AturChanPerfCorrBlk; - int AturChanPerfUncorrBlk; - - //RFC-3440 - int AtucPerfStatFastR; - int AtucPerfStatFailedFastR; - int AtucPerfStatSesL; - int AtucPerfStatUasL; - int AturPerfStatSesL; - int AturPerfStatUasL; -}amazon_mei_mib; - -typedef struct adslChanPrevTxRate{ - u32 adslAtucChanPrevTxRate; - u32 adslAturChanPrevTxRate; -}adslChanPrevTxRate; - -typedef struct adslPhysCurrStatus{ - u32 adslAtucCurrStatus; - u32 adslAturCurrStatus; -}adslPhysCurrStatus; - -typedef struct ChanType{ - int interleave; - int fast; -// 603221:tc.chen start - int bearchannel0; - int bearchannel1; -// 603221:tc.chen end -}ChanType; - -typedef struct mib_previous_read{ - u16 ATUC_PERF_ESS; - u16 ATUR_PERF_ESS; - u32 ATUR_CHAN_RECV_BLK; - u16 ATUR_CHAN_CORR_BLK_INTL; - u16 ATUR_CHAN_CORR_BLK_FAST; - u16 ATUR_CHAN_UNCORR_BLK_INTL; - u16 ATUR_CHAN_UNCORR_BLK_FAST; - u16 ATUC_PERF_STAT_FASTR; - u16 ATUC_PERF_STAT_FAILED_FASTR; - u16 ATUC_PERF_STAT_SESL; - u16 ATUC_PERF_STAT_UASL; - u16 ATUR_PERF_STAT_SESL; -}mib_previous_read; - -typedef struct mib_flags_pretime{ - struct timeval ATUC_PERF_LOSS_PTIME; - struct timeval ATUC_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LOSS_PTIME; - struct timeval ATUR_PERF_LOFS_PTIME; - struct timeval ATUR_PERF_LPR_PTIME; -}mib_flags_pretime; - - // cmv message structures -#define MP_PAYLOAD_SIZE 12 -typedef struct mpmessage{ - u16 iFunction; - u16 iGroup; - u16 iAddress; - u16 iIndex; - u16 iPayload[MP_PAYLOAD_SIZE]; -}MPMessage; -#endif - - -typedef struct meireg{ - u32 iAddress; - u32 iData; -}meireg; - -#define MEIDEBUG_BUFFER_SIZES 50 -typedef struct meidebug{ - u32 iAddress; - u32 iCount; - u32 buffer[MEIDEBUG_BUFFER_SIZES]; -}meidebug; - -//============================================================================== -// Group definitions -//============================================================================== -#define OPTN 5 -#define CNFG 8 -#define CNTL 1 -#define STAT 2 -#define RATE 6 -#define PLAM 7 -#define INFO 3 -#define TEST 4 -//============================================================================== -// Opcode definitions -//============================================================================== -#define H2D_CMV_READ 0x00 -#define H2D_CMV_WRITE 0x04 -#define H2D_CMV_INDICATE_REPLY 0x10 -#define H2D_ERROR_OPCODE_UNKNOWN 0x20 -#define H2D_ERROR_CMV_UNKNOWN 0x30 - -#define D2H_CMV_READ_REPLY 0x01 -#define D2H_CMV_WRITE_REPLY 0x05 -#define D2H_CMV_INDICATE 0x11 -#define D2H_ERROR_OPCODE_UNKNOWN 0x21 -#define D2H_ERROR_CMV_UNKNOWN 0x31 -#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41 -#define D2H_ERROR_CMV_WRITE_ONLY 0x51 -#define D2H_ERROR_CMV_READ_ONLY 0x61 - -#define H2D_DEBUG_READ_DM 0x02 -#define H2D_DEBUG_READ_PM 0x06 -#define H2D_DEBUG_WRITE_DM 0x0a -#define H2D_DEBUG_WRITE_PM 0x0e - -#define D2H_DEBUG_READ_DM_REPLY 0x03 -#define D2H_DEBUG_READ_FM_REPLY 0x07 -#define D2H_DEBUG_WRITE_DM_REPLY 0x0b -#define D2H_DEBUG_WRITE_FM_REPLY 0x0f -#define D2H_ERROR_ADDR_UNKNOWN 0x33 - -#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1 -//============================================================================== -// INFO register address field definitions -//============================================================================== - -#define INFO_TxState 0 -#define INFO_RxState 1 -#define INFO_TxNextState 2 -#define INFO_RxNextState 3 -#define INFO_TxStateJumpFrom 4 -#define INFO_RxStateJumpFrom 5 - -#define INFO_ReverbSnrBuf 8 -#define INFO_ReverbEchoSnrBuf 9 -#define INFO_MedleySnrBuf 10 -#define INFO_RxShowtimeSnrBuf 11 -#define INFO_DECdelay 12 -#define INFO_DECExponent 13 -#define INFO_DECTaps 14 -#define INFO_AECdelay 15 -#define INFO_AECExponent 16 -#define INFO_AECTaps 17 -#define INFO_TDQExponent 18 -#define INFO_TDQTaps 19 -#define INFO_FDQExponent 20 -#define INFO_FDQTaps 21 -#define INFO_USBat 22 -#define INFO_DSBat 23 -#define INFO_USFineGains 24 -#define INFO_DSFineGains 25 -#define INFO_BitloadFirstChannel 26 -#define INFO_BitloadLastChannel 27 -#define INFO_PollEOCData 28 // CO specific -#define INFO_CSNRMargin 29 // CO specific -#define INFO_RCMsgs1 30 -#define INFO_RMsgs1 31 -#define INFO_RMsgRA 32 -#define INFO_RCMsgRA 33 -#define INFO_RMsg2 34 -#define INFO_RCMsg2 35 -#define INFO_BitLoadOK 36 -#define INFO_RCRates1 37 -#define INFO_RRates1Tab 38 -#define INFO_RMsgs1Tab 39 -#define INFO_RMsgRATab 40 -#define INFO_RRatesRA 41 -#define INFO_RCRatesRA 42 -#define INFO_RRates2 43 -#define INFO_RCRates2 44 -#define INFO_PackedRMsg2 45 -#define INFO_RxBitSwapFlag 46 -#define INFO_TxBitSwapFlag 47 -#define INFO_ShowtimeSNRUpdateCount 48 -#define INFO_ShowtimeFDQUpdateCount 49 -#define INFO_ShowtimeDECUpdateCount 50 -#define INFO_CopyRxBuffer 51 -#define INFO_RxToneBuf 52 -#define INFO_TxToneBuf 53 -#define INFO_Version 54 -#define INFO_TimeStamp 55 -#define INFO_feVendorID 56 -#define INFO_feSerialNum 57 -#define INFO_feVersionNum 58 -#define INFO_BulkMemory 59 //Points to start of bulk memory -#define INFO_neVendorID 60 -#define INFO_neVersionNum 61 -#define INFO_neSerialNum 62 - -//============================================================================== -// RATE register address field definitions -//============================================================================== - - -#define RATE_UsRate 0 -#define RATE_DsRate 1 - - -//============================================================================== -// PLAM (Physical Layer Management) register address field definitions -// (See G997.1 for reference) -//============================================================================== - - - // /// - // Failure Flags /// - // /// - -#define PLAM_NearEndFailureFlags 0 -#define PLAM_FarEndFailureFlags 1 - - // /// - // Near End Failure Flags Bit Definitions /// - // /// - -// ADSL Failures /// -#define PLAM_LOS_FailureBit 0x0001 -#define PLAM_LOF_FailureBit 0x0002 -#define PLAM_LPR_FailureBit 0x0004 -#define PLAM_RFI_FailureBit 0x0008 - -// ATM Failures /// -#define PLAM_NCD_LP0_FailureBit 0x0010 -#define PLAM_NCD_LP1_FailureBit 0x0020 -#define PLAM_LCD_LP0_FailureBit 0x0040 -#define PLAM_LCD_LP1_FailureBit 0x0080 - -#define PLAM_NCD_BC0_FailureBit 0x0100 -#define PLAM_NCD_BC1_FailureBit 0x0200 -#define PLAM_LCD_BC0_FailureBit 0x0400 -#define PLAM_LCD_BC1_FailureBit 0x0800 - // /// - // Performance Counts /// - // /// - -#define PLAM_NearEndCrcCnt 2 -#define PLAM_CorrectedRSErrors 3 - -#define PLAM_NearEndECSCnt 6 -#define PLAM_NearEndESCnt 7 -#define PLAM_NearEndSESCnt 8 -#define PLAM_NearEndLOSSCnt 9 -#define PLAM_NearEndUASLCnt 10 - -#define PLAM_NearEndHECErrCnt 11 - -#define PLAM_NearEndHECTotCnt 16 -#define PLAM_NearEndCellTotCnt 18 -#define PLAM_NearEndSfCntLSW 20 -#define PLAM_NearEndSfCntMSW 21 - -#define PLAM_FarEndFebeCnt 24 - -#define PLAM_FarEndFecCnt 28 - -#define PLAM_FarEndFECSCnt 32 -#define PLAM_FarEndESCnt 33 -#define PLAM_FarEndSESCnt 34 -#define PLAM_FarEndLOSSCnt 35 -#define PLAM_FarEndUASLCnt 36 - -#define PLAM_FarEndHECErrCnt 37 - -#define PLAM_FarEndHECTotCnt 41 - -#define PLAM_FarEndCellTotCnt 43 - -#define PLAM_LineAttn 45 -#define PLAM_SNRMargin 46 - - -//============================================================================== -// CNTL register address and bit field definitions -//============================================================================== - - -#define CNTL_ModemControl 0 - -#define CNTL_ModemReset 0x0 -#define CNTL_ModemStart 0x2 - - -//============================================================================== -// STAT register address and bit field definitions -//============================================================================== - -#define STAT_MacroState 0 -#define STAT_Mode 1 -#define STAT_DMTFramingMode 2 -#define STAT_SleepState 3 -#define STAT_Misc 4 -#define STAT_FailureState 5 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - //16-bit STAT_OLRStatus_DS - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits). - // [11]: 1=Receive Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRStatus_DS 6 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_OLRStatus provides status of OLR - // 16-bit STAT_OLRStatus_US CMV - // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted - // [3:2]: Reserved - // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) - // [7:6]: Reserved - // [8]: 1=Request Received. 0=not. - // [10:9]: Reserved - // [11]: 1=Response Sent, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -/// -#define STAT_OLRStatus_US 7 - -//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // STAT_PMStatus provides status of PM - // 16-bit STAT_PMStatus CMV - // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted - // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM - // [3]: Reserved - // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim) - // [7:6]: Reserved - // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits). - // [11]: 1=Response, 0=not - // [15:12]: Reserved - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_PMStatus 8 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError - // [3:0]: OLR/PM response reason code - // [7:4]: OLR/PM Internal error code - // [15:8]: OLR/PM Reserved for future - ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - /// -#define STAT_OLRError_DS 9 -#define STAT_OLRError_US 10 -#define STAT_PMError 11 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_MacroState -// MacroState reflects the high level state of the modem - -#define STAT_InitState 0x0000 -#define STAT_ReadyState 0x0001 -#define STAT_FailState 0x0002 -#define STAT_IdleState 0x0003 -#define STAT_QuietState 0x0004 -#define STAT_GhsState 0x0005 -#define STAT_FullInitState 0x0006 -#define STAT_ShowTimeState 0x0007 -#define STAT_FastRetrainState 0x0008 -#define STAT_LoopDiagMode 0x0009 -#define STAT_ShortInit 0x000A // Bis short initialization /// - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Mode -// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use -// G.Hs or some other mechanism to negotiate the specific mode of operation. -// The OPTN_modeControl CMV is used to select a set of desired modes. -// The STAT_Mode CMV indicates which mode was actually selected. - -#define STAT_ConfigMode_T1413 0x0001 -#define STAT_ConfigMode_G992_2_AB 0x0002 -#define STAT_ConfigMode_G992_1_A 0x0004 -#define STAT_ConfigMode_G992_1_B 0x0008 -#define STAT_ConfigMode_G992_1_C 0x0010 -#define STAT_ConfigMode_G992_2_C 0x0020 - -#define STAT_ConfigMode_G992_3_A 0x0100 -#define STAT_ConfigMode_G992_3_B 0x0200 -#define STAT_ConfigMode_G992_3_I 0x0400 -#define STAT_ConfigMode_G992_3_J 0x0800 -#define STAT_ConfigMode_G992_3_L 0x1000 - -#define STAT_ConfigMode_G992_4_A 0x2000 -#define STAT_ConfigMode_G992_4_I 0x4000 - -#define STAT_ConfigMode_G992_5 0x8000 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_DMTFramingMode -// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode -// status is not applicable in BIS mode and its value is undefined -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_FramingModeMask 0x0003 - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_Misc -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OverlappedSpectrum 0x0008 -#define STAT_TCM 0x0010 -#define STAT_TDQ_at_1104 0x0020 -#define STAT_T1413_Signal_Detected 0x0040 -#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1 -#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// STAT_FailureState -// when the MacroSTate indicates the fail state, FailureState provides a failure code -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - - -#define E_CODE_NO_ERROR 0 -#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */ -#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */ -#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */ -#define E_CODE_TX_AOC_FIFO_OVERFLOW 4 -#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/ -#define E_CODE_BITLOAD 6 // bit loading fails */ -#define E_CODE_ST_ERROR 7 // showtime CRC error */ -#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */ -#define E_CODE_C_TONES 9 // detected C_TONES */ -#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */ -#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */ -#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */ -#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */ -#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */ -#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */ -#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */ -#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */ -#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */ -#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */ -#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */ -#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */ -#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */ -#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */ -#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */ -#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */ -#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */ -#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */ -#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */ -#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */ -#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */ -#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */ -#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */ -#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */ -#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */ -#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */ -#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */ -#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */ -#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */ -#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */ -#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */ -#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */ -#define E_CODE_BAD_MEM_ACCESS 46 -#define E_CODE_BAD_INSTRUCTION_ACCESS 47 -#define E_CODE_TX_EOC_FIFO_OVERFLOW 48 -#define E_CODE_RX_EOC_FIFO_OVERFLOW 49 -#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */ - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//STAT_OLRStatus: -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define STAT_OLRPM_IDLE 0x0000 -#define STAT_OLRPM_IN_PROGRESS 0x0001 -#define STAT_OLRPM_COMPLETE 0x0002 -#define STAT_OLRPM_ABORTED 0x0003 -#define STAT_OLRPM_RESPONSE 0x0800 - -#define STAT_OLR_BITSWAP 0x0010 -#define STAT_OLR_DRR 0x0020 -#define STAT_OLR_SRA 0x0030 - -//STAT_PMStatus_US: -#define STAT_PM_CO_REQ 0x0004 -#define STAT_PM_SIMPLE_REQ 0x0010 -#define STAT_PM_L2_REQ 0x0020 -#define STAT_PM_L2_TRIM_REQ 0x0030 - -// STAT_OLRError_DS, STAT_OLRError_US -//4 bit response reason code: -#define RESP_BUSY 0x01 -#define RESP_INVALID_PARAMETERS 0x02 -#define RESP_NOT_ENABLED 0x03 -#define RESP_NOT_SUPPORTED 0x04 - -//4 bit internal error code (common for OLR and PM) -#define REQ_INVALID_BiGi 0x10 -#define REQ_INVALID_Lp 0x20 -#define REQ_INVALID_Bpn 0x30 -#define REQ_INVALID_FRAMING_CONSTRAINT 0x40 -#define REQ_NOT_IN_L0_STATE 0x50 -#define REQ_NOT_IN_L2_STATE 0x60 -#define REQ_INVALID_PCB 0x70 -#define REQ_VIOLATES_MARGIN 0x80 - -//STAT_PMError -//4 bit response reason code: -#define RESP_STATE_NOT_DESIRED 0x03 -#define RESP_INFEASIBLE_PARAMETERS 0x04 - - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN register address and bit field definitions -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_ModeControl 0 -#define OPTN_DMTLnkCtl 1 -// Reserved 2 -#define OPTN_GhsControl 3 -// Reserved 4 -#define OPTN_PwrManControl 5 -#define OPTN_AnnexControl 6 -#define OPTN_ModeControl1 7 -// Reserved 8 -#define OPTN_StateMachineCtrl 9 -// Reserved 10 -// Reserved 11 -#define OPTN_BisLinkControl 12 -#define OPTN_ATMAddrConfig 13 -#define OPTN_ATMNumCellConfig 14 - -// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may /// -// use G.Hs or some other mechanism to negotiate the specific mode of operation. /// -// The OPTN_ModeControl CMV is used to select a set of desired modes /// -// The STAT_ModeControl CMV indicates which mode was actually selected /// - -// OPTN_ModeControl -#define OPTN_ConfigMode_T1413 0x0001 -#define OPTN_ConfigMode_G992_2_AB 0x0002 -#define OPTN_ConfigMode_G992_1_A 0x0004 -#define OPTN_ConfigMode_G992_1_B 0x0008 -#define OPTN_ConfigMode_G992_1_C 0x0010 -#define OPTN_ConfigMode_G992_2_C 0x0020 - -#define OPTN_ConfigMode_G992_3_A 0x0100 -#define OPTN_ConfigMode_G992_3_B 0x0200 -#define OPTN_ConfigMode_G992_3_I 0x0400 -#define OPTN_ConfigMode_G992_3_J 0x0800 -#define OPTN_ConfigMode_G992_3_L 0x1000 - -#define OPTN_ConfigMode_G992_4_A 0x2000 -#define OPTN_ConfigMode_G992_4_I 0x4000 - -#define OPTN_ConfigMode_G992_5 0x8000 - -// OPTN_PwrManControl -#define OPTN_PwrManWakeUpGhs 0x1 -#define OPTN_PwrManWakeUpFR 0x2 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_DMT Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_DMT_DualLatency_Dis 0x200 -#define OPTN_DMT_S_Dis 0x100 -#define OPTN_DMT_FRAMINGMODE 0x1 -#define OPTN_DMT_FRAMINGMODE_MASK 0x7 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_BIS Link Control -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -#define OPTN_BisLinkContrl_LineProbeDis 0x1 -#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2 -#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_GhsControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// -// for OPTN_GhsControl, we will assign 16bit word as follows -// bit 0~3: set the control over which start(initial) message CPE will send: -// -// BIT: 2 1 0 -// 0 0 1 CLR -// 0 1 0 MR -// 0 1 1 MS -// 1 0 0 MP -// -// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange -// BIT: 5 4 -// 0 1 MS -// 1 0 MR -// 1 1 MP -// -// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default. -// BIT: 15 -// 1 means session one -// -/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_GHS_ST_GHS 0x8000 -#define OPTN_GHS_INIT_MASK 0x000F -#define OPTN_GHS_RESP_MASK 0x00F0 - -#define OPTN_RTInitTxMsg_CLR 0x0001 -#define OPTN_RTInitTxMsg_MR 0x0002 -#define OPTN_RTInitTxMsg_MS 0x0003 -#define OPTN_RTInitTxMsg_MP 0x0004 - -#define OPTN_RTRespTxMsg_MS 0x0010 -#define OPTN_RTRespTxMsg_MR 0x0020 -#define OPTN_RTRespTxMsg_MP 0x0030 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// OPTN_AnnexControl -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - - -// G.992.3 Annex A/L1/L2 US PSD Mask preferred - -#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000 -#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask /// -#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask /// - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMAddrConfig -// Bits 4:0 are Utopia address for BC1 -// Bits 9:5 are Utopia address for BC0 -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_UTPADDR_BC1 0x001F -#define OPTN_UTPADDR_BC0 0x03E0 - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -//OPTN_ATMNumCellConfig -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 /// -#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 /// - - -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// -// CNFG register address field /// -////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// - -/////////////////////////////////////////// -// these cmvs are used by bis handshake /// -/////////////////////////////////////////// - -// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t) -#define CNFG_TPS_TC_DS0 0 -#define CNFG_TPS_TC_DS1 1 -#define CNFG_TPS_TC_US0 2 -#define CNFG_TPS_TC_US1 3 - -#define CNFG_HDLC_Overhead_Requirements 4 - -// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t) -#define CNFG_PMS_TC_DS0 5 -#define CNFG_PMS_TC_DS1 6 -#define CNFG_PMS_TC_US0 7 -#define CNFG_PMS_TC_US1 8 - -// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t) -#define CNFG_PMD_PARAMETERS 9 - -//////////////////////////////////////////////////////////// -// these cmvs are used by bis training and showtime code /// -//////////////////////////////////////////////////////////// - -//////////////// -// Tx Config /// -//////////////// -#define CNFG_tx_Cnfg_Nbc 10 -#define CNFG_tx_Cnfg_Nlp 11 -#define CNFG_tx_Cnfg_Rp 12 -#define CNFG_tx_Cnfg_Mp 13 -#define CNFG_tx_Cnfg_Lp 14 -#define CNFG_tx_Cnfg_Tp 15 -#define CNFG_tx_Cnfg_Dp 16 -#define CNFG_tx_Cnfg_Bpn 17 -#define CNFG_tx_Cnfg_FramingMode 18 -#define CNFG_tx_Cnfg_MSGLp 19 -#define CNFG_tx_Cnfg_MSGc 20 - - -//////////////// -// Rx Config /// -//////////////// -#define CNFG_rx_Cnfg_Nbc 21 -#define CNFG_rx_Cnfg_Nlp 22 -#define CNFG_rx_Cnfg_Rp 23 -#define CNFG_rx_Cnfg_Mp 24 -#define CNFG_rx_Cnfg_Lp 25 -#define CNFG_rx_Cnfg_Tp 26 -#define CNFG_rx_Cnfg_Dp 27 -#define CNFG_rx_Cnfg_Bpn 28 -#define CNFG_rx_Cnfg_FramingMode 29 -#define CNFG_rx_Cnfg_MSGLp 30 -#define CNFG_rx_Cnfg_MSGc 31 - -#define CNFG_tx_Cnfg_BCnToLPp 32 -#define CNFG_rx_Cnfg_BCnToLPp 33 - - - -#endif - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_sw.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_sw.h deleted file mode 100644 index 3b73b53892..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_sw.h +++ /dev/null @@ -1,176 +0,0 @@ -#ifndef AMAZON_SW_H -#define AMAZON_SW_H -#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE -#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1 -#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2 -#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 -#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 -#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 -#define SET_ETH_REG SIOCDEVPRIVATE+6 -#define VLAN_TOOLS SIOCDEVPRIVATE+7 -#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8 - - -/*===mac table commands==*/ -#define RESET_MAC_TABLE 0 -#define READ_MAC_ENTRY 1 -#define WRITE_MAC_ENTRY 2 -#define ADD_MAC_ENTRY 3 - -/*====vlan commands===*/ - -#define CHANGE_VLAN_CTRL 0 -#define READ_VLAN_ENTRY 1 -#define UPDATE_VLAN_ENTRY 2 -#define CLEAR_VLAN_ENTRY 3 -#define RESET_VLAN_TABLE 4 -#define ADD_VLAN_ENTRY 5 - -/* -** MDIO constants. -*/ - -#define MDIO_BASE_STATUS_REG 0x1 -#define MDIO_BASE_CONTROL_REG 0x0 -#define MDIO_PHY_ID_HIGH_REG 0x2 -#define MDIO_PHY_ID_LOW_REG 0x3 -#define MDIO_BC_NEGOTIATE 0x0200 -#define MDIO_BC_FULL_DUPLEX_MASK 0x0100 -#define MDIO_BC_AUTO_NEG_MASK 0x1000 -#define MDIO_BC_SPEED_SELECT_MASK 0x2000 -#define MDIO_STATUS_100_FD 0x4000 -#define MDIO_STATUS_100_HD 0x2000 -#define MDIO_STATUS_10_FD 0x1000 -#define MDIO_STATUS_10_HD 0x0800 -#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800 -#define MDIO_ADVERTISMENT_REG 0x4 -#define MDIO_ADVERT_100_FD 0x100 -#define MDIO_ADVERT_100_HD 0x080 -#define MDIO_ADVERT_10_FD 0x040 -#define MDIO_ADVERT_10_HD 0x020 -#define MDIO_LINK_UP_MASK 0x4 -#define MDIO_START 0x1 -#define MDIO_READ 0x2 -#define MDIO_WRITE 0x1 -#define MDIO_PREAMBLE 0xfffffffful - -#define PHY_RESET 0x8000 -#define AUTO_NEGOTIATION_ENABLE 0X1000 -#define AUTO_NEGOTIATION_COMPLETE 0x20 -#define RESTART_AUTO_NEGOTIATION 0X200 - - -#define PHY0_ADDR 0 -#define PHY1_ADDR 1 -#define P1M 0 - -#define AMAZON_SW_REG32(reg_num) *((volatile u32*)(reg_num)) - -#define OK 0; - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -typedef struct mac_table_entry{ - u64 mac_address:48; - u64 p0:1; - u64 p1:1; - u64 p2:1; - u64 cr:1; - u64 ma_st:3; - u64 res:9; -}_mac_table_entry; - -typedef struct IFX_Switch_VLanTableEntry{ - u32 vlan_id:12; - u32 mp0:1; - u32 mp1:1; - u32 mp2:1; - u32 v:1; - u32 res:16; -}_IFX_Switch_VLanTableEntry; - -typedef struct mac_table_req{ - int cmd; - int index; - u32 data; - u64 entry_value; -}_mac_table_req; - -#else //not CONFIG_CPU_LITTLE_ENDIAN -typedef struct mac_table_entry{ - u64 mac_address:48; - u64 p0:1; - u64 p1:1; - u64 p2:1; - u64 cr:1; - u64 ma_st:3; - u64 res:9; -}_mac_table_entry; - -typedef struct IFX_Switch_VLanTableEntry{ - u32 vlan_id:12; - u32 mp0:1; - u32 mp1:1; - u32 mp2:1; - u32 v:1; - u32 res:16; -}_IFX_Switch_VLanTableEntry; - - -typedef struct mac_table_req{ - int cmd; - int index; - u32 data; - u64 entry_value; -}_mac_table_req; - -#endif //CONFIG_CPU_LITTLE_ENDIAN - - - -typedef struct vlan_req{ - int cmd; - int index; - u32 data; - u32 entry_value; -}_vlan_req; - -typedef struct data_req{ - int index; - u32 value; -}_data_req; - -enum duplex -{ - half, - full, - autoneg -}; - -struct switch_priv { - struct net_device_stats stats; - int rx_packetlen; - u8 *rx_packetdata; - int rx_status; - int tx_packetlen; -#ifdef CONFIG_NET_HW_FLOWCONTROL - int fc_bit; -#endif //CONFIG_NET_HW_FLOWCONTROL - u8 *tx_packetdata; - int tx_status; - struct dma_device_info *dma_device; - struct sk_buff *skb; - spinlock_t lock; - int mdio_phy_addr; - int current_speed; - int current_speed_selection; - int rx_queue_len; - int full_duplex; - enum duplex current_duplex; -}; - -#endif //AMAZON_SW_H - - - - - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_tpe.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_tpe.h deleted file mode 100644 index a64e6f9f80..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_tpe.h +++ /dev/null @@ -1,258 +0,0 @@ -#ifndef AMAZON_TPE_H -#define AMAZON_TPE_H -#include -#include -#include -#include - -#ifdef CONFIG_IFX_ATM_MIB -/* For ATM-MIB lists */ -#include -#endif -#include - -/* CBM Queue arranagement - * Q0: free cells pool - * Q1~ Q15: upstream queues - * Q16: QAM downstream - * Q17~Q31: downstream queues - */ -#define AMAZON_ATM_MAX_QUEUE_NUM 32 -#define AMAZON_ATM_PORT_NUM 2 -#define AMAZON_ATM_FREE_CELLS 4000 -#define AMAZON_ATM_MAX_VCC_NUM (AMAZON_ATM_MAX_QUEUE_NUM/2 - 1) -#define AMAZON_AAL0_SDU (ATM_AAL0_SDU+4) //one more word for status -#define CBM_RX_OFFSET 16 //offset from the same q for tx -#define AMAZON_ATM_OAM_Q_ID 16 -#define AMAZON_ATM_RM_Q_ID 16 -#define AMAZON_ATM_OTHER_Q_ID 16 -#define CBM_DEFAULT_Q_OFFSET 1 -#define HTUTIMEOUT 0xffff//timeoutofhtutocbm -#define QSB_WFQ_NONUBR_MAX 0x3f00 -#define QSB_WFQ_UBR_BYPASS 0x3fff -#define QSB_TP_TS_MAX 65472 -#define QSB_TAUS_MAX 64512 -#define QSB_GCR_MIN 18 -#define HTU_RAM_ACCESS_MAX 1024//maxium time for HTU RAM access - -#define SWIE_LOCK 1 -#define PROC_ATM 1 -#define PROC_MIB 2 -#define PROC_VCC 3 -#define PROC_AAL5 4 -#define PROC_CBM 5 -#define PROC_HTU 6 -#define PROC_QSB 7 -#define PROC_SWIE 8 - -/***************** internal data structure ********************/ -typedef int (*push_back_t)(struct atm_vcc *vcc,struct sk_buff *skb,int err) ; -/* Device private data */ -typedef struct{ - u8 padding_byte; - u32 tx_max_sdu; - u32 rx_max_sdu; - u32 cnt_cpy; //no. of packets that need a copy due to alignment -}amazon_aal5_dev_t; - -typedef struct{ - u32 max_q_off; //maxium queues used in real scenario - u32 nrt_thr; - u32 clp0_thr; - u32 clp1_thr; - u32 free_cell_cnt; -#ifdef CONFIG_USE_VENUS - u8 * qd_addr_free; //to work around a bug, bit15 of QDOFF address should be 1 -#endif - u8 * qd_addr; - u8 * mem_addr; - u8 allocated; -}amazon_cbm_dev_t; - -typedef struct{ - -}amazon_htu_dev_t; - -typedef struct{ - u32 tau; //cell delay variation due to concurrency(?) - u32 tstepc; //time step, all legal values are 1,2,4 - u32 sbl; //scheduler burse length (for PHY) -}amazon_qsb_dev_t; - -typedef struct{ - u32 qid; //QID of the current extraction queue - struct semaphore in_sem; // Software-Insertion semaphore - volatile long lock; //lock that avoids race contions between SWIN and SWEX - wait_queue_head_t sleep; //wait queue for SWIE and SWEX - u32 sw; //status word -}amazon_swie_dev_t; - -//AAL5 MIB Counter -typedef struct{ - u32 tx,rx; //number AAL5 CPCS PDU from/to higher-layer - u32 tx_err,rx_err; //ifInErrors and ifOutErros - u32 tx_drop,rx_drop; //discarded received packets due to mm shortage - u32 htu_unp; //number of unknown received cells - u32 rx_cnt_h; //number of octets received, high 32 bits - u32 rx_cnt_l; //number of octets received, low 32 bits - u32 tx_cnt_h; //number of octets transmitted, high 32 bits - u32 tx_cnt_l; //number of octets transmitted, low 32 bits - u32 tx_ppd; //number of cells for AAL5 upstream PPD discards - u64 rx_cells; //number of cells for downstream - u64 tx_cells; //number of cells for upstream - u32 rx_err_cells; //number of cells dropped due to uncorrectable HEC errors -}amazon_mib_counter_t; - - - -typedef enum {QS_PKT,QS_LEN,QS_ERR,QS_HW_DROP,QS_SW_DROP,QS_MAX} qs_t; -//queue statics no. of packet received / sent -//queue statics no. of bytes received / sent -//queue statics no. of packets with error -//queue statics no. of packets dropped by hw -//queue statics no. of packets dropped by sw - -typedef struct{ - push_back_t push; //call back function - struct atm_vcc * vcc; //opened vcc - struct timeval access_time; //time when last F4/F5 user cells arrive - int free; //whether this queue is occupied, 0: occupied, 1: free - u32 aal5VccCrcErrors; //MIB counter - u32 aal5VccOverSizedSDUs; //MIB counter - -#if defined(AMAZON_ATM_DEBUG) || defined (CONFIG_IFX_ATM_MIB) - u32 qs[QS_MAX]; -#endif -}amazon_atm_queue_t; - - -typedef struct{ - int enable; //enable / disable - u32 max_conn; //maximum number of connections per port - u32 tx_max_cr; //Remaining cellrate for this device for tx direction - u32 tx_rem_cr; //Remaining cellrate for this device for tx direction - u32 tx_cur_cr; //Current cellrate for this device for tx direction -}amazon_atm_port_t; - -typedef struct{ - amazon_aal5_dev_t aal5; - amazon_cbm_dev_t cbm; - amazon_htu_dev_t htu; - amazon_qsb_dev_t qsb; - amazon_swie_dev_t swie; - amazon_mib_counter_t mib_counter; - amazon_atm_queue_t queues[AMAZON_ATM_MAX_QUEUE_NUM]; - amazon_atm_port_t ports[AMAZON_ATM_PORT_NUM]; - atomic_t dma_tx_free_0;//TX_CH0 has availabe descriptors -} amazon_atm_dev_t; - -struct oam_last_activity{ - u8 vpi; //vpi for this connection - u16 vci; //vci for t his connection - struct timeval stamp; //time when last F4/F5 user cells arrive - struct oam_last_activity * next;//for link list purpose -}; - -typedef union{ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - struct{ - u32 tprs :16; - u32 twfq :14; - u32 vbr :1; - u32 reserved :1; - }bit; - u32 w0; -#else - struct{ - u32 reserved :1; - u32 vbr :1; - u32 twfq :14; - u32 tprs :16; - }bit; - u32 w0; -#endif - -}qsb_qptl_t; - -typedef union{ -#ifdef CONFIG_CPU_LITTLE_ENDIAN - struct{ - u32 ts :16; - u32 taus :16; - }bit; - u32 w0; -#else - struct{ - u32 taus :16; - u32 ts :16; - }bit; - u32 w0; -#endif -}qsb_qvpt_t; - - - -struct amazon_atm_cell_header { -#ifdef CONFIG_CPU_LITTLE_ENDIAN - struct{ - u32 clp :1; // Cell Loss Priority - u32 pti :3; // Payload Type Identifier - u32 vci :16; // Virtual Channel Identifier - u32 vpi :8; // Vitual Path Identifier - u32 gfc :4; // Generic Flow Control - }bit; -#else - struct{ - u32 gfc :4; // Generic Flow Control - u32 vpi :8; // Vitual Path Identifier - u32 vci :16; // Virtual Channel Identifier - u32 pti :3; // Payload Type Identifier - u32 clp :1; // Cell Loss Priority - }bit; -#endif -}; - - -/************************ Function Declarations **************************/ -amazon_atm_dev_t * amazon_atm_create(void); -int amazon_atm_open(struct atm_vcc *vcc,push_back_t); -int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb); -int amazon_atm_send_oam(struct atm_vcc *vcc,void *cell, int flags); -void amazon_atm_close(struct atm_vcc *vcc); -void amazon_atm_cleanup(void); -const struct oam_last_activity* get_oam_time_stamp(void); - -//mib-related -int amazon_atm_cell_mib(atm_cell_ifEntry_t * to,u32 itf); -int amazon_atm_aal5_mib(atm_aal5_ifEntry_t * to); -int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t * to); -int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to); - -#define AMAZON_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data); wmb();} while (0) -#define AMAZON_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) -/******************************* ioctl stuff****************************************/ -#define NUM(dev) (MINOR(dev) & 0xf) -/* - * Ioctl definitions - */ -/* Use 'o' as magic number */ -#define AMAZON_ATM_IOC_MAGIC 'o' -/* MIB_CELL: get atm cell level mib counter - * MIB_AAL5: get aal5 mib counter - * MIB_VCC: get vcc mib counter - */ -typedef struct{ - int vpi; - int vci; - atm_aal5_vcc_t mib_vcc; -}atm_aal5_vcc_x_t; -#define AMAZON_ATM_MIB_CELL _IOWR(AMAZON_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t) -#define AMAZON_ATM_MIB_AAL5 _IOWR(AMAZON_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t) -#define AMAZON_ATM_MIB_VCC _IOWR(AMAZON_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t) -#define AMAZON_ATM_IOC_MAXNR 3 - -//sockopt -#define SO_AMAZON_ATM_MIB_VCC __SO_ENCODE(SOL_ATM,5,atm_aal5_vcc_t) - -#endif // AMAZON_TPE_H - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_wdt.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_wdt.h deleted file mode 100644 index 775dabccfb..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/amazon_wdt.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef AMAZON_WDT_H -#define AMAZON_WDT_H -#ifdef __KERNEL__ -typedef struct wdt_dev{ - char name[16]; - int major; - int minor; - - int full; - char buff[10]; -}wdt_dev; -#define AMAZON_WDT_REG32(addr) (*((volatile u32*)(addr))) -#endif //__KERNEL__ - -//AMAZON_WDT_IOC_START: start the WDT timer (must provide a initial timeout value) -//AMAZON_WDT_IOC_STOP: stop the WDT -//AMAZON_WDT_IOC_PING: reload the timer to initial value (must happend after a AMAZON_WDT_IOC_START) -#define AMAZON_WDT_IOC_MAGIC 0xc0 -#define AMAZON_WDT_IOC_START _IOW( AMAZON_WDT_IOC_MAGIC,0, int) -#define AMAZON_WDT_IOC_STOP _IO( AMAZON_WDT_IOC_MAGIC,1) -#define AMAZON_WDT_IOC_PING _IO( AMAZON_WDT_IOC_MAGIC,2) - -#endif //AMAZON_WDT_H diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_defines.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_defines.h deleted file mode 100644 index 8adda20051..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_defines.h +++ /dev/null @@ -1,540 +0,0 @@ -#ifndef ATM_DEFINES_H -#define ATM_DEFINES_H - -//Registers Base Address -#define IO_BASE_ADDR 0xA0000000 -#define AAL5_BASE_ADDRESS 0x10104400+IO_BASE_ADDR -#define CBM_BASE_ADDRESS 0x10104000+IO_BASE_ADDR -#define HTU_BASE_ADDRESS 0x10105100+IO_BASE_ADDR -#define QSB_BASE_ADDRESS 0x10105000+IO_BASE_ADDR -#define SWIE_BASE_ADDRESS 0x10105200+IO_BASE_ADDR - -//AAL5 Registers -#define AAL5_SISR0_ADDR AAL5_BASE_ADDRESS+0x20 -#define AAL5_SIMR0_ADDR AAL5_BASE_ADDRESS+0x24 -#define AAL5_SISR1_ADDR AAL5_BASE_ADDRESS+0x28 -#define AAL5_SIMR1_ADDR AAL5_BASE_ADDRESS+0x2C -#define AAL5_SMFL_ADDR AAL5_BASE_ADDRESS+0x30 -#define AAL5_SATMHD_ADDR AAL5_BASE_ADDRESS+0x34 -#define AAL5_SCON_ADDR AAL5_BASE_ADDRESS+0x38 -#define AAL5_SCMD_ADDR AAL5_BASE_ADDRESS+0x3C -#define AAL5_RISR0_ADDR AAL5_BASE_ADDRESS+0x40 -#define AAL5_RIMR0_ADDR AAL5_BASE_ADDRESS+0x44 -#define AAL5_RISR1_ADDR AAL5_BASE_ADDRESS+0x48 -#define AAL5_RIMR1_ADDR AAL5_BASE_ADDRESS+0x4C -#define AAL5_RMFL_ADDR AAL5_BASE_ADDRESS+0x50 -#define AAL5_RINTINF0_ADDR AAL5_BASE_ADDRESS+0x54 -#define AAL5_RINTINF1_ADDR AAL5_BASE_ADDRESS+0x58 -#define AAL5_RES5C_ADDR AAL5_BASE_ADDRESS+0x5C -#define AAL5_RIOL_ADDR AAL5_BASE_ADDRESS+0x60 -#define AAL5_RIOM_ADDR AAL5_BASE_ADDRESS+0x64 -#define AAL5_SOOL_ADDR AAL5_BASE_ADDRESS+0x68 -#define AAL5_SOOM_ADDR AAL5_BASE_ADDRESS+0x6C -#define AAL5_RES70_ADDR AAL5_BASE_ADDRESS+0x70 -#define AAL5_RES74_ADDR AAL5_BASE_ADDRESS+0x74 -#define AAL5_RES78_ADDR AAL5_BASE_ADDRESS+0x78 -#define AAL5_RES7C_ADDR AAL5_BASE_ADDRESS+0x7C -#define AAL5_RES80_ADDR AAL5_BASE_ADDRESS+0x80 -#define AAL5_RES84_ADDR AAL5_BASE_ADDRESS+0x84 -#define AAL5_RES88_ADDR AAL5_BASE_ADDRESS+0x88 -#define AAL5_RES8C_ADDR AAL5_BASE_ADDRESS+0x8C -#define AAL5_RES90_ADDR AAL5_BASE_ADDRESS+0x90 -#define AAL5_RES94_ADDR AAL5_BASE_ADDRESS+0x94 -#define AAL5_RES98_ADDR AAL5_BASE_ADDRESS+0x98 -#define AAL5_RES9C_ADDR AAL5_BASE_ADDRESS+0x9C -#define AAL5_RESA0_ADDR AAL5_BASE_ADDRESS+0xA0 -#define AAL5_RESA4_ADDR AAL5_BASE_ADDRESS+0xA4 -#define AAL5_RESA8_ADDR AAL5_BASE_ADDRESS+0xA8 -#define AAL5_RESAC_ADDR AAL5_BASE_ADDRESS+0xAC -#define AAL5_RESB0_ADDR AAL5_BASE_ADDRESS+0xB0 -#define AAL5_RESB4_ADDR AAL5_BASE_ADDRESS+0xB4 -#define AAL5_RESB8_ADDR AAL5_BASE_ADDRESS+0xB8 -#define AAL5_RESBC_ADDR AAL5_BASE_ADDRESS+0xBC -#define AAL5_RESC0_ADDR AAL5_BASE_ADDRESS+0xC0 -#define AAL5_RESC4_ADDR AAL5_BASE_ADDRESS+0xC4 -#define AAL5_RESC8_ADDR AAL5_BASE_ADDRESS+0xC8 -#define AAL5_RESCC_ADDR AAL5_BASE_ADDRESS+0xCC -#define AAL5_RESD0_ADDR AAL5_BASE_ADDRESS+0xD0 -#define AAL5_RESD4_ADDR AAL5_BASE_ADDRESS+0xD4 -#define AAL5_RESD8_ADDR AAL5_BASE_ADDRESS+0xD8 -#define AAL5_RESDC_ADDR AAL5_BASE_ADDRESS+0xDC -#define AAL5_RESE0_ADDR AAL5_BASE_ADDRESS+0xE0 -#define AAL5_RESE4_ADDR AAL5_BASE_ADDRESS+0xE4 -#define AAL5_RESE8_ADDR AAL5_BASE_ADDRESS+0xE8 -#define AAL5_RESEC_ADDR AAL5_BASE_ADDRESS+0xEC -#define AAL5_SSRC0_ADDR AAL5_BASE_ADDRESS+0xF0 -#define AAL5_SSRC1_ADDR AAL5_BASE_ADDRESS+0xF4 -#define AAL5_RSRC0_ADDR AAL5_BASE_ADDRESS+0xF8 -#define AAL5_RSRC1_ADDR AAL5_BASE_ADDRESS+0xFC - -#define AAL5S_ISR_QID_MASK 0xFF000000 -#define AAL5S_ISR_SAB 0x00000100 -#define AAL5S_ISR_SE 0x00000080 -#define AAL5S_ISR_MFLE 0x00000040 -#define AAL5S_ISR_SBE0 0x00000020 -#define AAL5S_ISR_SEG0 0x00000010 -#define AAL5S_ISR_TAB 0x00000004 - -#define AAL5_SIMR_MASK 0x000001c7 -#define AAL5_SIMR_SAB 0x00000100 -#define AAL5_SIMR_SE 0x00000080 -#define AAL5_SIMR_MFLE 0x00000040 -#define AAL5_SIMR_TAB 0x00000004 -#define AAL5_SIMR_SBE0 0x00000002 -#define AAL5_SIMR_SEG0 0x00000001 - -#define AAL5_SCMD_SEQCOUNT_MASK 0x0000ff00 -#define AAL5_SCMD_MODE_POLL 0x00000008 -#define AAL5_SCMD_MODE_COUNT 0x00000000 -#define AAL5_SCMD_AS 0x00000004 -#define AAL5_SCMD_SS 0x00000002 -#define AAL5_SCMD_AR 0x00000001 - -#define AAL5R_ISR_CID_MASK 0xFF000000//ConnectionID -#define AAL5R_ISR_DBC_MASK 0x00FF0000//DiscardedByteCounter -#define AAL5R_ISR_END 0x00002000//End -#define AAL5R_ISR_ICID 0x00001000//InvalidConnectionID -#define AAL5R_ISR_CLP 0x00000800//CellLossPriority -#define AAL5R_ISR_CGST 0x00000400//Congestion -#define AAL5R_ISR_UUE 0x00000200//CPCSUUError -#define AAL5R_ISR_CPIE 0x00000100//CPIError -#define AAL5R_ISR_FE 0x00000080//FrameEnd -#define AAL5R_ISR_MFLE 0x00000040//MaximumFrameLengthExceeded -#define AAL5R_ISR_DBCE 0x00000020//DiscardedByteCounterExceeded -#define AAL5R_ISR_CRC 0x00000010//CRCError -#define AAL5R_ISR_ILEN 0x00000008//InvalidLength -#define AAL5R_ISR_RAB 0x00000004//ReceiveAbort - -#define AAL5_RIMR1_MASK 0x00003ffc -#define AAL5_RIMR1_END 0x00002000//End -#define AAL5_RIMR1_ICID 0x00001000//InvalidConnectionID -#define AAL5_RIMR1_CLP 0x00000800//CellLossPriority -#define AAL5_RIMR1_CGST 0x00000400//Congestion -#define AAL5_RIMR1_UUE 0x00000200//CPCSUUError -#define AAL5_RIMR1_CPIE 0x00000100//CPIError -#define AAL5_RIMR1_FE 0x00000080//FrameEnd -#define AAL5_RIMR1_MFLE 0x00000040//MaximumFrameLengthExceeded -#define AAL5_RIMR1_DBCE 0x00000020//DiscardedByteCounterExceeded -#define AAL5_RIMR1_CRC 0x00000010//CRCError -#define AAL5_RIMR1_ILEN 0x00000008//InvalidLength -#define AAL5_RIMR1_RAB 0x00000004//ReceiveAbort - -//AAL5 Reassambly Errors -#define AAL5_STW1_MASK 0x33//Error mask -#define AAL5_STW0_MASK 0x5c//Error mask -#define AAL5_STW0_BE 0x3//padding bytes mask -#define AAL5_STW1_CBM 0x20//Transfer from CBM to A5R abnormally ended -#define AAL5_STW1_CH 0x10//Invalid Channel number error -#define AAL5_STW1_CLP 0x8//CLP value of cells in packet is 1 -#define AAL5_STW1_CG 0x4//Cell in packet expired congestion -#define AAL5_STW1_UU 0x2//CPCS-UU value error -#define AAL5_STW1_CPI 0x1//CPI value error -#define AAL5_STW0_FE 0x80//Frame end -#define AAL5_STW0_MFL 0x40//Maximum frame length error -#define AAL5_STW0_CRC 0x10//CRC error -#define AAL5_STW0_IL 0x8//Invalid length -#define AAL5_STW0_RA 0x4//Received abort - - - -//CBM Registers -#define CBM_NRTTHR_ADDR CBM_BASE_ADDRESS+0x10//NonRealTimeThreshold -#define CBM_CLP0THR_ADDR CBM_BASE_ADDRESS+0x14//CLP0Threshold -#define CBM_CLP1THR_ADDR CBM_BASE_ADDRESS+0x18//CLP1Threshold -#define CBM_QDOFF_ADDR CBM_BASE_ADDRESS+0x1C//QueueDescriptorOffset -#define CBM_CFG_ADDR CBM_BASE_ADDRESS+0x20//Configuration -#define CBM_HWEXPAR0_ADDR CBM_BASE_ADDRESS+0x24//HWExtractParameter0 -#define CBM_RES28_ADDR CBM_BASE_ADDRESS+0x28 -#define CBM_WMSTAT0_ADDR CBM_BASE_ADDRESS+0x2C -#define CBM_HWEXCMD_ADDR CBM_BASE_ADDRESS+0x30//HWExtractCommand0 -#define CBM_RES34_ADDR CBM_BASE_ADDRESS+0x34 -#define CBM_HWEXSTAT0_ADDR CBM_BASE_ADDRESS+0x38//HWExtractStatus0 -#define CBM_RES3C_ADDR CBM_BASE_ADDRESS+0x3C -#define CBM_RES40_ADDR CBM_BASE_ADDRESS+0x40 -#define CBM_CNT_ADDR CBM_BASE_ADDRESS+0x44//CellCount -#define CBM_RES48_ADDR CBM_BASE_ADDRESS+0x48 -#define CBM_LFR_ADDR CBM_BASE_ADDRESS+0x4C//PointertolastCellinfreeCellQueue -#define CBM_FFR_ADDR CBM_BASE_ADDRESS+0x50//PointertofirstCellinfreeCellQueue -#define CBM_RES54_ADDR CBM_BASE_ADDRESS+0x54 -#define CBM_RES58_ADDR CBM_BASE_ADDRESS+0x58 -#define CBM_RES5C_ADDR CBM_BASE_ADDRESS+0x5C -#define CBM_RES60_ADDR CBM_BASE_ADDRESS+0x60 -#define CBM_RES64_ADDR CBM_BASE_ADDRESS+0x64 -#define CBM_RES68_ADDR CBM_BASE_ADDRESS+0x68 -#define CBM_RES6C_ADDR CBM_BASE_ADDRESS+0x6C -#define CBM_RES70_ADDR CBM_BASE_ADDRESS+0x70 -#define CBM_RES74_ADDR CBM_BASE_ADDRESS+0x74 -#define CBM_RES78_ADDR CBM_BASE_ADDRESS+0x78 -#define CBM_RES7C_ADDR CBM_BASE_ADDRESS+0x7C -#define CBM_RES80_ADDR CBM_BASE_ADDRESS+0x80 -#define CBM_RES84_ADDR CBM_BASE_ADDRESS+0x84 -#define CBM_RES88_ADDR CBM_BASE_ADDRESS+0x88 -#define CBM_RES8C_ADDR CBM_BASE_ADDRESS+0x8C -#define CBM_RES90_ADDR CBM_BASE_ADDRESS+0x90 -#define CBM_RES94_ADDR CBM_BASE_ADDRESS+0x94 -#define CBM_RES98_ADDR CBM_BASE_ADDRESS+0x98 -#define CBM_RES9C_ADDR CBM_BASE_ADDRESS+0x9C -#define CBM_RESA0_ADDR CBM_BASE_ADDRESS+0xA0 -#define CBM_RESA4_ADDR CBM_BASE_ADDRESS+0xA4 -#define CBM_RESA8_ADDR CBM_BASE_ADDRESS+0xA8 -#define CBM_RESAC_ADDR CBM_BASE_ADDRESS+0xAC -#define CBM_RESB0_ADDR CBM_BASE_ADDRESS+0xB0 -#define CBM_RESB4_ADDR CBM_BASE_ADDRESS+0xB4 -#define CBM_RESB8_ADDR CBM_BASE_ADDRESS+0xB8 -#define CBM_RESBC_ADDR CBM_BASE_ADDRESS+0xBC -#define CBM_INTINF0_ADDR CBM_BASE_ADDRESS+0xC0//InterruptInfo0 -#define CBM_INTCMD_ADDR CBM_BASE_ADDRESS+0xC4//InterruptCommand0 -#define CBM_IMR0_ADDR CBM_BASE_ADDRESS+0xC8//InterruptMask -#define CBM_SRC0_ADDR CBM_BASE_ADDRESS+0xCC//ServiceRequestControl -#define CBM_RESD0_ADDR CBM_BASE_ADDRESS+0xD0 -#define CBM_RESD4_ADDR CBM_BASE_ADDRESS+0xD4 -#define CBM_RESD8_ADDR CBM_BASE_ADDRESS+0xD8 -#define CBM_RESDC_ADDR CBM_BASE_ADDRESS+0xDC -#define CBM_RESE0_ADDR CBM_BASE_ADDRESS+0xE0 -#define CBM_AAL5IDIS_ADDR CBM_BASE_ADDRESS+0xE4//MIB-No.EPDdiscardedpacketsupstream -#define CBM_AAL5ODIS_ADDR CBM_BASE_ADDRESS+0xE8//MIB-No.PPDdiscardedpacketsupstream -#define CBM_RESEC_ADDR CBM_BASE_ADDRESS+0xEC -#define CBM_RESF0_ADDR CBM_BASE_ADDRESS+0xF0 -#define CBM_RESF4_ADDR CBM_BASE_ADDRESS+0xF4 -#define CBM_RESF8_ADDR CBM_BASE_ADDRESS+0xF8 -#define CBM_RESFC_ADDR CBM_BASE_ADDRESS+0xFC - -//CBMCFG -#define CBM_CFG_INTLCK0EN 0x00000008 -#define CBM_CFG_INT0HLT 0x00000004 -#define CBM_CFG_START 0x00000001 - -#define CBM_HWEXPAR_PN_A5 0x00002000 -#define CBM_HWEXPAR_PN_CM 0x00000000 -#define CBM_HWEXPAR_SUBADD_PORTMASK 0x00000070 -#define CBM_HWEXPAR_SUBADD_ADU 0x00000000 -#define CBM_HWEXPAR_SUBADD_AAL2 0x00000080 -#define CBM_HWEXPAR_SUBADD_SWIE 0x00000100 - -#define CBM_HWEXCMD_SFE2 0x00000100 -#define CBM_HWEXCMD_FE2 0x00000080 -#define CBM_HWEXCMD_SCE2 0x00000040 -#define CBM_HWEXCMD_SFE1 0x00000020 -#define CBM_HWEXCMD_FE1 0x00000010 -#define CBM_HWEXCMD_SCE1 0x00000008 -#define CBM_HWEXCMD_SFE0 0x00000004 -#define CBM_HWEXCMD_FE0 0x00000002 -#define CBM_HWEXCMD_SCE0 0x00000001 - -#define CBM_INTINF0_QID_MASK 0xFF000000 -#define CBM_INTINF0_ORIGIN_MASK 0x00F00000 -#define CBM_INTINF0_EF 0x00004000 -#define CBM_INTINF0_ACA 0x00002000 -#define CBM_INTINF0_ERR 0x00001000 -#define CBM_INTINF0_DISC 0x00000800 -#define CBM_INTINF0_QSBV 0x00000400 -#define CBM_INTINF0_Q0E 0x00000200 -#define CBM_INTINF0_Q0I 0x00000100 -#define CBM_INTINF0_RDE 0x00000080 -#define CBM_INTINF0_OPF 0x00000040 -#define CBM_INTINF0_NFCA 0x00000020 -#define CBM_INTINF0_CLP1TR 0x00000010 -#define CBM_INTINF0_CLP0TR 0x00000008 -#define CBM_INTINF0_NRTTR 0x00000004 -#define CBM_INTINF0_QFD 0x00000002 -#define CBM_INTINF0_QTR 0x00000001 -#define CBM_INTINF0_QID_SHIFT 24 -//CBM QD Word 3 -#define CBM_QD_W3_QOS_0 0x00000000 -#define CBM_QD_W3_QOS_1 0x40000000 -#define CBM_QD_W3_QOS_2 0x80000000 -#define CBM_QD_W3_QOS_3 0xc0000000 - -#define CBM_QD_W3_DIR_UP 0x20000000 -#define CBM_QD_W3_DIR_DOWN 0x00000000 - -#define CBM_QD_W3_CLPt 0x10000000 -#define CBM_QD_W3_RT 0x08000000 -#define CBM_QD_W3_AAL5 0x04000000 - -#define CBM_QD_W3_INT_NOINT 0x00000000 -#define CBM_QD_W3_INT_ACA 0x01000000 -#define CBM_QD_W3_INT_EOF 0x02000000 -#define CBM_QD_W3_INT_BOTH 0x03000000 - -#define CBM_QD_W3_THRESHOLD_MASK 0x00ff0000 -#define CBM_QD_W3_WM_EN 0x00000010 -#define CBM_QD_W3_HCR 0x00000008 -#define CBM_QD_W3_SBID_MASK 0x00000001 - -#define CBM_QD_W3_THRESHOLD_SHIFT 16 - -//WATER MARK STATUS -#define CBM_WM_NRT_MASK 0x00040000 -#define CBM_WM_CLP0_MASK 0x00020000 -#define CBM_WM_CLP1_MASK 0x00010000 - -//CBMNRTTHR, CBMCLP0THR, CBMCLP0THR -#define CBM_NRT_WM_NONE 0x00000000//no water mark -#define CBM_WM_3_1 0x00010000//3/4 to set, 1/4 to release -#define CBM_WM_3_2 0x00020000//3/4 to set, 2/4 to release -#define CBM_WM_2_1 0x00030000//2/4 to set, 1/4 to release -#define CBM_THR_MASK 0x0000FFFF - -#define CBM_IMR_MASK 0x0000fbff -#define CBM_IMR_reserved 0xFFFF0400 -#define CBM_IMR_RFULL 0x00008000//EndofFrame -#define CBM_IMR_EF 0x00004000//EndofFrame -#define CBM_IMR_ACA 0x00002000//AnyCellArrived -#define CBM_IMR_ERR 0x00001000//FPI Error -#define CBM_IMR_DISC 0x00000800//Discard -#define CBM_IMR_reserved1 0x00000400//reserved -#define CBM_IMR_Q0E 0x00000200//Queue0Extract -#define CBM_IMR_Q0I 0x00000100//Queue0Insert -#define CBM_IMR_RDE 0x00000080//ReadEmptyQueue -#define CBM_IMR_OPF 0x00000040//OncePerFrame -#define CBM_IMR_NFCA 0x00000020//NoFreeCellAvailable -#define CBM_IMR_CLP1TR 0x00000010//CLP1ThresholdReached -#define CBM_IMR_CLP0TR 0x00000008//CLP0ThresholdReached -#define CBM_IMR_NRTTR 0x00000004//NonRealTimeThresholdReached -#define CBM_IMR_QFD 0x00000002//QueueFrameDiscard -#define CBM_IMR_QTR 0x00000001//QueueThresholdReached - -#define CBM_EXSTAT_FB 0x00000010 -#define CBM_EXSTAT_SCB 0x00000008 -#define CBM_EXSTAT_Q0 0x00000004 -#define CBM_EXSTAT_RDE 0x00000002 -#define CBM_EXSTAT_QV 0x00000001 - -//HTU Registers -#define HTU_RX0_ADDR HTU_BASE_ADDRESS+0x10 -#define HTU_RX1_ADDR HTU_BASE_ADDRESS+0x14 -#define HTU_RES18_ADDR HTU_BASE_ADDRESS+0x18 -#define HTU_RES1C_ADDR HTU_BASE_ADDRESS+0x1C -#define HTU_RES20_ADDR HTU_BASE_ADDRESS+0x20 -#define HTU_RES24_ADDR HTU_BASE_ADDRESS+0x24 -#define HTU_RES28_ADDR HTU_BASE_ADDRESS+0x28 -#define HTU_RES2C_ADDR HTU_BASE_ADDRESS+0x2C -#define HTU_PCF0PAT_ADDR HTU_BASE_ADDRESS+0x30 -#define HTU_PCF1PAT_ADDR HTU_BASE_ADDRESS+0x34 -#define HTU_RES38_ADDR HTU_BASE_ADDRESS+0x38 -#define HTU_RES3C_ADDR HTU_BASE_ADDRESS+0x3C -#define HTU_RES40_ADDR HTU_BASE_ADDRESS+0x40 -#define HTU_RES44_ADDR HTU_BASE_ADDRESS+0x44 -#define HTU_RES48_ADDR HTU_BASE_ADDRESS+0x48 -#define HTU_RES4C_ADDR HTU_BASE_ADDRESS+0x4C -#define HTU_PCF0MASK_ADDR HTU_BASE_ADDRESS+0x50 -#define HTU_PCF1MASK_ADDR HTU_BASE_ADDRESS+0x54 -#define HTU_RES58_ADDR HTU_BASE_ADDRESS+0x58 -#define HTU_RES5C_ADDR HTU_BASE_ADDRESS+0x5C -#define HTU_RES60_ADDR HTU_BASE_ADDRESS+0x60 -#define HTU_RES64_ADDR HTU_BASE_ADDRESS+0x64 -#define HTU_RES68_ADDR HTU_BASE_ADDRESS+0x68 -#define HTU_RES6C_ADDR HTU_BASE_ADDRESS+0x6C -#define HTU_TIMEOUT_ADDR HTU_BASE_ADDRESS+0x70 -#define HTU_DESTOAM_ADDR HTU_BASE_ADDRESS+0x74 -#define HTU_DESTRM_ADDR HTU_BASE_ADDRESS+0x78 -#define HTU_DESTOTHER_ADDR HTU_BASE_ADDRESS+0x7C -#define HTU_CFG_ADDR HTU_BASE_ADDRESS+0x80 -#define HTU_RES84_ADDR HTU_BASE_ADDRESS+0x84 -#define HTU_RES88_ADDR HTU_BASE_ADDRESS+0x88 -#define HTU_RES8C_ADDR HTU_BASE_ADDRESS+0x8C -#define HTU_INFNOENTRY_ADDR HTU_BASE_ADDRESS+0x90 -#define HTU_INFTIMEOUT_ADDR HTU_BASE_ADDRESS+0x94 -#define HTU_RES98_STAT HTU_BASE_ADDRESS+0x98 -#define HTU_RES9C_ADDR HTU_BASE_ADDRESS+0x9C -#define HTU_MIBCIUP HTU_BASE_ADDRESS+0xA0//MIB Counter In Unknown Protoc Register -#define HTU_CNTTIMEOUT_ADDR HTU_BASE_ADDRESS+0xA4 -#define HTU_RESA8_ADDR HTU_BASE_ADDRESS+0xA8 -#define HTU_RESAC_ADDR HTU_BASE_ADDRESS+0xAC -#define HTU_RAMADDR_ADDR HTU_BASE_ADDRESS+0xB0 -#define HTU_RAMCMD_ADDR HTU_BASE_ADDRESS+0xB4 -#define HTU_RAMSTAT_ADDR HTU_BASE_ADDRESS+0xB8 -#define HTU_RESBC_ADDR HTU_BASE_ADDRESS+0xBC -#define HTU_RAMDAT1_ADDR HTU_BASE_ADDRESS+0xC0 -#define HTU_RAMDAT2_ADDR HTU_BASE_ADDRESS+0xC4 -#define HTU_RESCC_ADDR HTU_BASE_ADDRESS+0xCC -#define HTU_RESD0_ADDR HTU_BASE_ADDRESS+0xD0 -#define HTU_RESD4_ADDR HTU_BASE_ADDRESS+0xD4 -#define HTU_RESD8_ADDR HTU_BASE_ADDRESS+0xD8 -#define HTU_RESDC_ADDR HTU_BASE_ADDRESS+0xDC -#define HTU_RESE0_ADDR HTU_BASE_ADDRESS+0xE0 -#define HTU_RESE4_ADDR HTU_BASE_ADDRESS+0xE4 -#define HTU_IMR0_ADDR HTU_BASE_ADDRESS+0xE8 -#define HTU_RESEC_ADDR HTU_BASE_ADDRESS+0xEC -#define HTU_ISR0_ADDR HTU_BASE_ADDRESS+0xF0 -#define HTU_RESF4_ADDR HTU_BASE_ADDRESS+0xF4 -#define HTU_SRC0_ADDR HTU_BASE_ADDRESS+0xF8 -#define HTU_RESFC_ADDR HTU_BASE_ADDRESS+0xFC - -//HTU_CFG -#define HTU_CFG_START 0x00000001 - -#define HTU_RAMCMD_RMW 0x00000004 -#define HTU_RAMCMD_RD 0x00000002 -#define HTU_RAMCMD_WR 0x00000001 - -#define HTU_RAMDAT1_VCON 0x00000080//validconnection -#define HTU_RAMDAT1_VCT 0x00000040//vcivalueistransparent -#define HTU_RAMDAT1_QIDS 0x00000020//qid selects a cell in cbm -#define HTU_RAMDAT1_VCI3 0x00000010//vci3->oamqueue -#define HTU_RAMDAT1_VCI4 0x00000008//vci4->oamqueue -#define HTU_RAMDAT1_VCI6 0x00000004//vci6->rmqueue -#define HTU_RAMDAT1_PTI4 0x00000002//pti4->oamqueue -#define HTU_RAMDAT1_PTI5 0x00000001//pti5->oamqueue - -#define HTU_RAMDAT2_PTI6 0x00000800 -#define HTU_RAMDAT2_PTI7 0x00000400 -#define HTU_RAMDAT2_F4U 0x00000200 -#define HTU_RAMDAT2_F5U 0x00000100 -#define HTU_RAMDAT2_QID_MASK 0x000000ff - -#define HTU_ISR_NE 0x00000001 -#define HTU_ISR_TORD 0x00000002 -#define HTU_ISR_IT 0x00000008 -#define HTU_ISR_OTOC 0x00000010 -#define HTU_ISR_ONEC 0x00000020 -#define HTU_ISR_PNE 0x00000040 -#define HTU_ISR_PT 0x00000080 -#define HTU_ISR_MASK 0x000000ff - - -//QSB Registers -#define QSB_BIP0_ADDR QSB_BASE_ADDRESS+0x00 -#define QSB_BIP1_ADDR QSB_BASE_ADDRESS+0x04 -#define QSB_BIP2_ADDR QSB_BASE_ADDRESS+0x08 -#define QSB_BIP3_ADDR QSB_BASE_ADDRESS+0x0C -#define QSB_RSVP_ADDR QSB_BASE_ADDRESS+0x10 -#define QSB_TNOW_ADDR QSB_BASE_ADDRESS+0x14 -#define QSB_TNOWCYC_ADDR QSB_BASE_ADDRESS+0x18 -#define QSB_TAU_ADDR QSB_BASE_ADDRESS+0x1C -#define QSB_L1BRS_ADDR QSB_BASE_ADDRESS+0x20 -#define QSB_SBL_ADDR QSB_BASE_ADDRESS+0x24 -#define QSB_CONFIG_ADDR QSB_BASE_ADDRESS+0x28 -#define QSB_RTM_ADDR QSB_BASE_ADDRESS+0x2C -#define QSB_RTD_ADDR QSB_BASE_ADDRESS+0x30 -#define QSB_RAMAC_ADDR QSB_BASE_ADDRESS+0x34 -#define QSB_ISR_ADDR QSB_BASE_ADDRESS+0x38 -#define QSB_IMR_ADDR QSB_BASE_ADDRESS+0x3C -#define QSB_SRC_ADDR QSB_BASE_ADDRESS+0x40 - -#define QSB_TABLESEL_QVPT 8 -#define QSB_TABLESEL_QPT 1 -#define QSB_TABLESEL_SCT 2 -#define QSB_TABLESEL_SPT 3 -#define QSB_TABLESEL_CALENDARWFQ 4/*notusedbyFW*/ -#define QSB_TABLESEL_L2WFQ 5/*notusedbyFW*/ -#define QSB_TABLESEL_CALENDARRS 6/*notusedbyFW*/ -#define QSB_TABLESEL_L2BITMAPRS 7/*notusedbyFW*/ -#define QSB_TABLESEL_SHIFT 24 -#define QSB_TWFQ_MASK 0x3FFF0000 -#define QSB_TPRS_MASK 0x0000FFFF -#define QSB_SBID_MASK 0xF -#define QSB_TWFQ_SHIFT 16 -#define QSB_SCDRATE_MASK 0x00007FFF -#define QSB_SBVALID_MASK 0x80000000 - -#define QSB_ISR_WFQLE 0x00000001 -#define QSB_ISR_WFQBE 0x00000002 -#define QSB_ISR_RSLE 0x00000004 -#define QSB_ISR_RSBE 0x00000008 -#define QSB_ISR_MUXOV 0x00000010 -#define QSB_ISR_CDVOV 0x00000020 -#define QSB_ISR_PARAMI 0x00000040 -#define QSB_ISR_SLOSS 0x00000080 -#define QSB_ISR_IIPS 0x00000100 - -#define QSB_IMR_WFQLE 0x00000001 -#define QSB_IMR_WFQBE 0x00000002 -#define QSB_IMR_RSLE 0x00000004 -#define QSB_IMR_RSBE 0x00000008 -#define QSB_IMR_MUXOV 0x00000010 -#define QSB_IMR_CDVOV 0x00000020 -#define QSB_IMR_PARAMI 0x00000040 -#define QSB_IMR_SLOSS 0x00000080 -#define QSB_IMR_IIPS 0x00000100 - -#define QSB_READ 0x0 -#define QSB_WRITE 0x80000000 -#define QSB_READ_ALL 0xFFFFFFFF - -#if 1 //some bug with QSB access mask -#define QSB_QPT_SET_MASK 0x0 -#define QSB_QVPT_SET_MASK 0x0 -#define QSB_SET_SCT_MASK 0x0 -#define QSB_SET_SPT_MASK 0x0 -#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF -#else //some bug with QSB access mask -#define QSB_QPT_SET_MASK 0x80000000 -#define QSB_QVPT_SET_MASK 0x0 -#define QSB_SET_SCT_MASK 0xFFFFFFE0 -#define QSB_SET_SPT_MASK 0x7FF8C000 -#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF -#endif //some bug with QSB access mask - -#define QSB_SPT_SBVALID 0x80000000 - -#define QSB_RAMAC_REG_LOW 0x0 -#define QSB_RAMAC_REG_HIGH 0x00010000 - -#define SRC_SRE_ENABLE 0x1000 -#define SRC_CLRR 0x4000 //request clear bit - - - -//SWIE Registers -#define SWIE_IQID_ADDR SWIE_BASE_ADDRESS+0x0c//SWIEInsertQueueDescriptor -#define SWIE_ICMD_ADDR SWIE_BASE_ADDRESS+0x10//SWIEInsertCommand -#define SWIE_ISTAT_ADDR SWIE_BASE_ADDRESS+0x14//SWIEInsertStatus -#define SWIE_ESTAT_ADDR SWIE_BASE_ADDRESS+0x18//SWIEExtractStatus -#define SWIE_ISRC_ADDR SWIE_BASE_ADDRESS+0x74//SWIEInsertServiceRequestControl -#define SWIE_ESRC_ADDR SWIE_BASE_ADDRESS+0x78//SWIEExtractServiceRequestControl -#define SWIE_ICELL_ADDR SWIE_BASE_ADDRESS+0x80//SWIEInsertCell(0x80-0xb4) -#define SWIE_ECELL_ADDR SWIE_BASE_ADDRESS+0xc0//SWIEExtractCell(0xc0-0xf4) - -#define SWIE_ISTAT_DONE 0x1 -#define SWIE_ESTAT_DONE 0x1 -#define SWIE_ICMD_START 0x00000001//Startcommandforinsertion -#define SWIE_CBM_SCE0 CBM_HWEXCMD_SCE0//CBMcommandforSingle-Cell-Extract -#define SWIE_CBM_PID_SUBADDR 0x00001000//CBMPortIDandSubAddressforUTOPIA - -//Extracted cell format -//52bytes AAL0 PDU + "Input cell additional data"(14bits) -#define SWIE_ADDITION_DATA_MASK 0x7fff -#define SWIE_EPORT_MASK 0x7000//Source ID (000 AUB0, 001 AUB1) -#define SWIE_EF4USER_MASK 0x800 -#define SWIE_EF5USER_MASK 0x400 -#define SWIE_EOAM_MASK 0x200 -#define SWIE_EAUU_MASK 0x100 -#define SWIE_EVCI3_MASK 0x80 -#define SWIE_EVCI4_MASK 0x40 -#define SWIE_EVCI6_MASK 0x20 -#define SWIE_EPTI4_MASK 0x10 -#define SWIE_EPTI5_MASK 0x8 -#define SWIE_EPTI6_MASK 0x4 -#define SWIE_EPTI7_MASK 0x2 -#define SWIE_ECRC10ERROR_MASK 0x1 - -#define CBM_CELL_SIZE 0x40 -#define CBM_QD_SIZE 0x10 -#define AAL5R_TRAILER_LEN 12 -#define AAL5S_INBOUND_HEADER 8 - -//constants -//TODO: to be finalized by system guys -//DMA QOS defined by ATM QoS Service type -#define DMA_RX_CH0 0 -#define DMA_RX_CH1 1 -#define DMA_TX_CH0 0 -#define DMA_TX_CH1 1 -#define CBR_DMA_QOS CBM_QD_W3_QOS_0 -#define VBR_RT_DMA_QOS CBM_QD_W3_QOS_0 -#define VBR_NRT_DMA_QOS CBM_QD_W3_QOS_0 -#define UBR_PLUS_DMA_QOS CBM_QD_W3_QOS_0 -#define UBR_DMA_QOS CBM_QD_W3_QOS_0 - -#define SRC_TOS_MIPS 0 -#define AAL5R_SRPN 0x00000006//a5rneedshigherprioritythanDR -#define AAL5S_SRPN 0x00000005 -#define CBM_MIPS_SRPN 0x00000004 -#define QSB_SRPN 0x00000023 -#define HTU_SRPN1 0x00000022 -#define HTU_SRPN0 0x00000021 - -#endif //ATM_DEFINES_H - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_mib.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_mib.h deleted file mode 100644 index f863342580..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/atm_mib.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef AMAZON_ATM_MIB_H -#define AMAZON_ATM_MIB_H - -#ifdef CONFIG_IFX_ATM_MIB -#include -#ifdef __KERNEL__ -#include -#endif -#endif /* CONFIG_IFX_ATM_MIB */ - -#ifndef __KERNEL__ -#include -typedef unsigned int __u32; -#endif - -typedef struct{ - __u32 ifHCInOctets_h; - __u32 ifHCInOctets_l; - __u32 ifHCOutOctets_h; - __u32 ifHCOutOctets_l; - __u32 ifInErrors; - __u32 ifInUnknownProtos; - __u32 ifOutErrors; -}atm_cell_ifEntry_t; - -typedef struct{ - __u32 ifHCInOctets_h; - __u32 ifHCInOctets_l; - __u32 ifHCOutOctets_h; - __u32 ifHCOutOctets_l; - __u32 ifInUcastPkts; - __u32 ifOutUcastPkts; - __u32 ifInErrors; - __u32 ifInDiscards; - __u32 ifOutErros; - __u32 ifOutDiscards; -}atm_aal5_ifEntry_t; - -typedef struct{ - __u32 aal5VccCrcErrors; - __u32 aal5VccSarTimeOuts;//no timer support yet - __u32 aal5VccOverSizedSDUs; -}atm_aal5_vcc_t; - -#if defined(CONFIG_IFX_ATM_MIB) || defined(IFX_CONFIG_SNMP_ATM_MIB) -/* ATM-MIB data structures */ -typedef struct atmIfConfEntry { - int ifIndex; - int atmInterfaceMaxVpcs; - int atmInterfaceMaxVccs; - int atmInterfaceConfVpcs; - int atmInterfaceConfVccs; - int atmInterfaceMaxActiveVpiBits; - int atmInterfaceMaxActiveVciBits; - int atmInterfaceIlmiVpi; - int atmInterfaceIlmiVci; - int atmInterfaceAddressType; - char atmInterfaceAdminAddress[40]; - unsigned long atmInterfaceMyNeighborIpAddress; - char atmInterfaceMyNeighborIfName[20]; - int atmInterfaceCurrentMaxVpiBits; - int atmInterfaceCurrentMaxVciBits; - char atmInterfaceSubscrAddress[40]; - int flags; -}atmIfConfEntry; - -typedef struct atmTrafficDescParamEntry { - /* Following three parameters are used to update VCC QoS values */ - int ifIndex; - short atmVclvpi; - int atmVclvci; - - unsigned int atmTrafficParamIndex; - unsigned char traffic_class; - int max_pcr; - /* Subramani: Added min_pcr */ - int min_pcr; - int cdv; - int scr; - int mbs; - int atmTrafficRowStatus; - int atmTrafficFrameDiscard; - struct list_head vpivci_head; - struct list_head list; -}atmTrafficDescParamEntry; - - -typedef struct atmVclEntry { - int ifIndex; - short atmVclvpi; - int atmVclvci; - char vpivci[20]; - int atmVclAdminStatus; - int atmVclOperStatus; - unsigned long atmVclLastChange; - struct atmTrafficDescParamEntry *atmVclRxTrafficPtr; - struct atmTrafficDescParamEntry *atmVclTxTrafficPtr; - unsigned char atmVccAalType; - unsigned int atmVccAal5TxSduSize; - unsigned int atmVccAal5RxSduSize; - int atmVccAal5Encap; - int atmVclRowStatus; - int atmVclCastType; - int atmVclConnKind; - struct list_head list; - int flags; -}atmVclEntry; - - -typedef union union_atmptrs { - struct atmIfConfEntry *atmIfConfEntry_ptr; - struct atmTrafficDescParamEntry *atmTrafficDescParamEntry_ptr; - struct atmVclEntry *atmVclEntry_ptr; -}union_atmptrs; - -/* ATM Character device major number */ -#define ATM_MEI_MAJOR 107 - -/* Protocol Constants */ -#define IFX_PROTO_RAW 0 -#define IFX_PROTO_BR2684 1 -#define IFX_PROTO_PPPOATM 2 -#define IFX_PROTO_CLIP 3 - -/* IOCTL Command Set for ATM-MIB */ -#define GET_ATM_IF_CONF_DATA 0x0AB0 -#define SET_ATM_IF_CONF_DATA 0x0AB1 - -#define SET_ATM_QOS_DATA 0x0BC0 - -#define GET_ATM_VCL_DATA 0x0CD0 -#define SET_ATM_VCL_DATA 0x0CD1 - -#define FIND_VCC_IN_KERNEL 0x0DE0 - -/* User defined flags for VCL Table */ -#define ATMVCCAAL5CPCSTRANSMITSDUSIZE 9 -#define ATMVCCAAL5CPCSRECEIVESDUSIZE 10 - -#endif /* CONFIG_IFX_ATM_MIB || IFX_CONFIG_SNMP_ATM_MIB */ - -#endif //AMAZON_ATM_MIB_H diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_peripheral_definitions.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_peripheral_definitions.h deleted file mode 100644 index 65f14e405f..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_peripheral_definitions.h +++ /dev/null @@ -1,96 +0,0 @@ -//************************************************************************* -//* Summary of definitions which are used in each peripheral * -//************************************************************************* - -#ifndef peripheral_definitions_h -#define peripheral_definitions_h - -typedef unsigned char UINT8; -typedef signed char INT8; -typedef unsigned short UINT16; -typedef signed short INT16; -typedef unsigned int UINT32; -typedef signed int INT32; -typedef unsigned long long UINT64; -typedef signed long long INT64; - -#define REG8( addr ) (*(volatile UINT8 *) (addr)) -#define REG16( addr ) (*(volatile UINT16 *)(addr)) -#define REG32( addr ) (*(volatile UINT32 *)(addr)) -#define REG64( addr ) (*(volatile UINT64 *)(addr)) - -/* define routine to set FPI access in Supervisor Mode */ -#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00 -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG) -/* Supervisor mode ends, following functions will be done in User mode */ -#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm -/* enable all Interrupts in IIU */ -//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask -///* get all high priority interrupt bits in IIU */ -//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED) -///* signal ends of interrupt to IIU */ -//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit -///* force IIU interrupt register */ -//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data -///* get all bits of interrupt register */ -//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR) -/* insert a NOP instruction */ -#define NOP _nop() -/* CPU goes to power down mode until interrupt occurs */ -#define IFX_CPU_SLEEP _sleep() -/* enable all interrupts to CPU */ -#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int() -/* get all low priority interrupt bits in peripheral */ -#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg) -/* clear low priority interrupt bit in peripheral */ -#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit -/* write FPI bus */ -#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data -#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data -#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data -/* read FPI bus */ -#define READ_FPI_BYTE(addr) REG8(addr) -#define READ_FPI_16BIT(addr) REG16(addr) -#define READ_FPI_32BIT(addr) REG32(addr) -/* write peripheral register */ -#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data -#else //not CONFIG_CPU_LITTLE_ENDIAN -#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data -#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data -#endif //CONFIG_CPU_LITTLE_ENDIAN - -/* read peripheral register */ -#define READ_PERIPHERAL_REGISTER(addr) REG32(addr) - -/* read/modify(or)/write peripheral register */ -#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data -/* read/modify(and)/write peripheral register */ -#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data - -/* CPU-independent mnemonic constants */ -/* CLC register bits */ -#define IFX_CLC_ENABLE 0x00000000 -#define IFX_CLC_DISABLE 0x00000001 -#define IFX_CLC_DISABLE_STATUS 0x00000002 -#define IFX_CLC_SUSPEND_ENABLE 0x00000004 -#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008 -#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010 -#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020 -#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00 -#define IFX_CLC_RUN_DIVIDER_OFFSET 8 -#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16 -#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000 -#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24 - -/* number of cycles to wait for interrupt service routine to be called */ -#define WAIT_CYCLES 50 - -#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */ diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc.h deleted file mode 100644 index e5d73ad4ec..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc.h +++ /dev/null @@ -1,263 +0,0 @@ -/* - * ifx_ssc.h defines some data sructures used in ifx_ssc.c - * - * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT) - * - * - */ - -#ifndef __IFX_SSC_H -#define __IFX_SSC_H -#ifdef __KERNEL__ -#include -#endif //__KERNEL__ - -#define PORT_CNT 1 // assume default value - -/* symbolic constants to be used in SSC routines */ - -// ### TO DO: bad performance -#define IFX_SSC_TXFIFO_ITL 1 -#define IFX_SSC_RXFIFO_ITL 1 - - - -struct ifx_ssc_statistics{ - unsigned int abortErr; /* abort error */ - unsigned int modeErr; /* master/slave mode error */ - unsigned int txOvErr; /* TX Overflow error */ - unsigned int txUnErr; /* TX Underrun error */ - unsigned int rxOvErr; /* RX Overflow error */ - unsigned int rxUnErr; /* RX Underrun error */ - unsigned int rxBytes; - unsigned int txBytes; -}; - - -struct ifx_ssc_hwopts { - unsigned int AbortErrDetect :1; /* Abort Error detection (in slave mode) */ - unsigned int rxOvErrDetect :1; /* Receive Overflow Error detection */ - unsigned int rxUndErrDetect :1; /* Receive Underflow Error detection */ - unsigned int txOvErrDetect :1; /* Transmit Overflow Error detection */ - unsigned int txUndErrDetect :1; /* Transmit Underflow Error detection */ - unsigned int echoMode :1; /* Echo mode */ - unsigned int loopBack :1; /* Loopback mode */ - unsigned int idleValue :1; /* Idle value */ - unsigned int clockPolarity :1; /* Idle clock is high or low */ - unsigned int clockPhase :1; /* Tx on trailing or leading edge*/ - unsigned int headingControl :1; /* LSB first or MSB first */ - unsigned int dataWidth :6; /* from 2 up to 32 bits */ - unsigned int masterSelect :1; /* Master or Slave mode */ - unsigned int modeRxTx :2; /* rx/tx mode */ - unsigned int gpoCs :8; /* choose outputs to use for chip select */ - unsigned int gpoInv :8; /* invert GPO outputs */ -}; - - -struct ifx_ssc_frm_opts { - bool FrameEnable; // SFCON.SFEN - unsigned int DataLength; // SFCON.DLEN - unsigned int PauseLength; // SFCON.PLEN - unsigned int IdleData; // SFCON.IDAT - unsigned int IdleClock; // SFCON.ICLK - bool StopAfterPause; // SFCON.STOP -}; - -struct ifx_ssc_frm_status { - bool DataBusy; // SFSTAT.DBSY - bool PauseBusy; // SFSTAT.PBSY - unsigned int DataCount; // SFSTAT.DCNT - unsigned int PauseCount; // SFSTAT.PCNT - bool EnIntAfterData; // SFCON.IBEN - bool EnIntAfterPause;// SFCON.IAEN -}; - -typedef struct { - char *buf; - size_t len; -} ifx_ssc_buf_item_t; - - -// data structures for batch execution -typedef union { - struct { - bool save_options; - } init; - ifx_ssc_buf_item_t read; - ifx_ssc_buf_item_t write; - ifx_ssc_buf_item_t rd_wr; - unsigned int set_baudrate; - struct ifx_ssc_frm_opts set_frm; - unsigned int set_gpo; - struct ifx_ssc_hwopts set_hwopts; -}ifx_ssc_batch_cmd_param; - -struct ifx_ssc_batch_list { - unsigned int cmd; - ifx_ssc_batch_cmd_param cmd_param; - struct ifx_ssc_batch_list *next; -}; - -#ifdef __KERNEL__ -#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE) - - -struct ifx_ssc_port{ - unsigned long mapbase; - struct ifx_ssc_hwopts opts; - struct ifx_ssc_statistics stats; - struct ifx_ssc_frm_status frm_status; - struct ifx_ssc_frm_opts frm_opts; - /* wait queue for ifx_ssc_read() */ - wait_queue_head_t rwait, pwait; - int port_nr; - char port_is_open; /* exclusive open - boolean */ -// int no_of_bits; /* number of _valid_ bits */ -// int elem_size; /* shift for element (no of bytes)*/ - /* buffer and pointers to the read/write position */ - char *rxbuf; /* buffer for RX */ - char *rxbuf_end; /* buffer end pointer for RX */ - volatile char *rxbuf_ptr; /* buffer write pointer for RX */ - char *txbuf; /* buffer for TX */ - char *txbuf_end; /* buffer end pointer for TX */ - volatile char *txbuf_ptr; /* buffer read pointer for TX */ - unsigned int baud; - /* each channel has its own interrupts */ - /* (transmit/receive/error/frame) */ - unsigned int txirq, rxirq, errirq, frmirq; -}; -/* default values for SSC configuration */ -// values of CON -#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */ -#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */ -#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */ -#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */ -#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */ -#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */ -#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */ -#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */ -#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */ -#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST -#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX -// other values -#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */ -#define IFX_SSC_DEF_BAUDRATE 1000000 -#define IFX_SSC_DEF_RMC 0x10 - -#define IFX_SSC_DEF_TXFIFO_FL 8 -#define IFX_SSC_DEF_RXFIFO_FL 1 - -#if 1 //TODO -#define IFX_SSC_DEF_GPO_CS 2 /* no chip select */ -#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */ -#else -#error "what is ur Chip Select???" -#endif -#define IFX_SSC_DEF_SFCON 0 /* no serial framing */ -#if 0 -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT -#endif -#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ - IFX_SSC_R_BIT | IFX_SSC_E_BIT -#endif /* __KERNEL__ */ - -// batch execution commands -#define IFX_SSC_BATCH_CMD_INIT 1 -#define IFX_SSC_BATCH_CMD_READ 2 -#define IFX_SSC_BATCH_CMD_WRITE 3 -#define IFX_SSC_BATCH_CMD_RD_WR 4 -#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5 -#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6 -#define IFX_SSC_BATCH_CMD_SET_FRM 7 -#define IFX_SSC_BATCH_CMD_SET_GPO 8 -#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9 -//#define IFX_SSC_BATCH_CMD_ -//#define IFX_SSC_BATCH_CMD_ -#define IFX_SSC_BATCH_CMD_END_EXEC 0 - -/* Macros to configure SSC hardware */ -/* headingControl: */ -#define IFX_SSC_LSB_FIRST 0 -#define IFX_SSC_MSB_FIRST 1 -/* dataWidth: */ -#define IFX_SSC_MIN_DATA_WIDTH 2 -#define IFX_SSC_MAX_DATA_WIDTH 32 -/* master/slave mode select */ -#define IFX_SSC_MASTER_MODE 1 -#define IFX_SSC_SLAVE_MODE 0 -/* rx/tx mode */ -// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h -#define IFX_SSC_MODE_RXTX 0 -#define IFX_SSC_MODE_RX 1 -#define IFX_SSC_MODE_TX 2 -#define IFX_SSC_MODE_OFF 3 -#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX - -/* GPO values */ -#define IFX_SSC_MAX_GPO_OUT 7 - -#define IFX_SSC_RXREQ_BLOCK_SIZE 32768 - -/***********************/ -/* defines for ioctl's */ -/***********************/ -#define IFX_SSC_IOCTL_MAGIC 'S' -/* read out the statistics */ -#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics) -/* clear the statistics */ -#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2) -/* set the baudrate */ -#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int) -/* get the current baudrate */ -#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int) -/* set hardware options */ -#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts) -/* get the current hardware options */ -#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts) -/* set transmission mode */ -#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int) -/* get the current transmission mode */ -#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int) -/* abort transmission */ -#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9) -#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9) - -/* set general purpose outputs */ -#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int) -/* clear general purpose outputs */ -#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int) -/* get general purpose outputs */ -#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int) - -/*** serial framing ***/ -/* get status of serial framing */ -#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status) -/* get counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts) -/* set counter reload values and control bits */ -#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts) - - -/*** batch execution ***/ -/* do batch execution */ -#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list) - - -#ifdef __KERNEL__ -// routines from ifx_ssc.c -// ### TO DO -/* kernel interface for read and write */ -ssize_t ifx_ssc_kread(int, char *, size_t); -ssize_t ifx_ssc_kwrite(int, const char *, size_t); - -#ifdef CONFIG_IFX_VP_KERNEL_TEST -void ifx_ssc_tc(void); -#endif // CONFIG_IFX_VP_KERNEL_TEST - -#endif //__KERNEL__ -#endif // __IFX_SSC_H - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc_defines.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc_defines.h deleted file mode 100644 index 46157dcbd6..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/ifx_ssc_defines.h +++ /dev/null @@ -1,552 +0,0 @@ -#ifndef IFX_SSC_DEFINES_H -#define IFX_SSC_DEFINES_H - -#include "ifx_peripheral_definitions.h" - -/* maximum SSC FIFO size */ -#define IFX_SSC_MAX_FIFO_SIZE 32 - -/* register map of SSC */ - -/* address of the Clock Control Register of the SSC */ -#define IFX_SSC_CLC 0x00000000 -/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0 - bit 1 is hardware modified*/ -#define IFX_SSC_CLC_readmask 0x00FFFFEF -#define IFX_SSC_CLC_writemask 0x00FFFF3D -#define IFX_SSC_CLC_hwmask 0x00000002 -#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask) - -/* address of Port Input Select Register of the SSC */ -#define IFX_SSC_PISEL 0x00000004 -/* IFX_SSC_PISEL register is significant in lowest three bits only */ -#define IFX_SSC_PISEL_readmask 0x00000007 -#define IFX_SSC_PISEL_writemask 0x00000007 -#define IFX_SSC_PISEL_hwmask 0x00000000 -#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask) - -/* address of Identification Register of the SSC */ -#define IFX_SSC_ID 0x00000008 -/* IFX_SSC_ID register is significant in no bit */ -#define IFX_SSC_ID_readmask 0x0000FF3F -#define IFX_SSC_ID_writemask 0x00000000 -#define IFX_SSC_ID_hwmask 0x00000000 -#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask) - -/* address of the Control Register of the SSC */ -#define IFX_SSC_CON 0x00000010 -/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */ -#define IFX_SSC_CON_readmask 0x01DF1FFF -#define IFX_SSC_CON_writemask 0x01DF1FFF -#define IFX_SSC_CON_hwmask 0x00000000 -#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask) - - -/* address of the Status Register of the SSC */ -#define IFX_SSC_STATE 0x00000014 -/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0 - all bits except 1:0 are hardware modified */ -#define IFX_SSC_STATE_readmask 0x771F3F87 -#define IFX_SSC_STATE_writemask 0x00000000 -#define IFX_SSC_STATE_hwmask 0x771F3F84 -#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask) - -/* address of the Write Hardware Modified Control Register Bits of the SSC */ -#define IFX_SSC_WHBSTATE 0x00000018 -/* IFX_SSC_WHBSTATE register is write only */ -#define IFX_SSC_WHBSTATE_readmask 0x00000000 -#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF -#define IFX_SSC_WHBSTATE_hwmask 0x00000000 -#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask) - -/* address of the Baudrate Timer Reload Register of the SSC */ -#define IFX_SSC_BR 0x00000040 -/* IFX_SSC_BR register is significant in bit 15 downto 0*/ -#define IFX_SSC_BR_readmask 0x0000FFFF -#define IFX_SSC_BR_writemask 0x0000FFFF -#define IFX_SSC_BR_hwmask 0x00000000 -#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask) - -/* address of the Baudrate Timer Status Register of the SSC */ -#define IFX_SSC_BRSTAT 0x00000044 -/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/ -#define IFX_SSC_BRSTAT_readmask 0x0000FFFF -#define IFX_SSC_BRSTAT_writemask 0x00000000 -#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF -#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask) - -/* address of the Transmitter Buffer Register of the SSC */ -#define IFX_SSC_TB 0x00000020 -/* IFX_SSC_TB register is significant in bit 31 downto 0*/ -#define IFX_SSC_TB_readmask 0xFFFFFFFF -#define IFX_SSC_TB_writemask 0xFFFFFFFF -#define IFX_SSC_TB_hwmask 0x00000000 -#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask) - -/* address of the Reciver Buffer Register of the SSC */ -#define IFX_SSC_RB 0x00000024 -/* IFX_SSC_RB register is significant in no bits*/ -#define IFX_SSC_RB_readmask 0xFFFFFFFF -#define IFX_SSC_RB_writemask 0x00000000 -#define IFX_SSC_RB_hwmask 0xFFFFFFFF -#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask) - -/* address of the Receive FIFO Control Register of the SSC */ -#define IFX_SSC_RXFCON 0x00000030 -/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_RXFCON_readmask 0x00003F03 -#define IFX_SSC_RXFCON_writemask 0x00003F03 -#define IFX_SSC_RXFCON_hwmask 0x00000000 -#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask) - -/* address of the Transmit FIFO Control Register of the SSC */ -#define IFX_SSC_TXFCON 0x00000034 -/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ -#define IFX_SSC_TXFCON_readmask 0x00003F03 -#define IFX_SSC_TXFCON_writemask 0x00003F03 -#define IFX_SSC_TXFCON_hwmask 0x00000000 -#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask) - -/* address of the FIFO Status Register of the SSC */ -#define IFX_SSC_FSTAT 0x00000038 -/* IFX_SSC_FSTAT register is significant in no bit*/ -#define IFX_SSC_FSTAT_readmask 0x00003F3F -#define IFX_SSC_FSTAT_writemask 0x00000000 -#define IFX_SSC_FSTAT_hwmask 0x00003F3F -#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask) - -/* address of the Data Frame Control register of the SSC */ -#define IFX_SSC_SFCON 0x00000060 -#define IFX_SSC_SFCON_readmask 0xFFDFFFFD -#define IFX_SSC_SFCON_writemask 0xFFDFFFFD -#define IFX_SSC_SFCON_hwmask 0x00000000 -#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask) - -/* address of the Data Frame Status register of the SSC */ -#define IFX_SSC_SFSTAT 0x00000064 -#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_writemask 0x00000000 -#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3 -#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask) - -/* address of the General Purpose Output Control register of the SSC */ -#define IFX_SSC_GPOCON 0x00000070 -#define IFX_SSC_GPOCON_readmask 0x0000FFFF -#define IFX_SSC_GPOCON_writemask 0x0000FFFF -#define IFX_SSC_GPOCON_hwmask 0x00000000 -#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask) - -/* address of the General Purpose Output Status register of the SSC */ -#define IFX_SSC_GPOSTAT 0x00000074 -#define IFX_SSC_GPOSTAT_readmask 0x000000FF -#define IFX_SSC_GPOSTAT_writemask 0x00000000 -#define IFX_SSC_GPOSTAT_hwmask 0x00000000 -#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask) - -/* address of the Force GPO Status register of the SSC */ -#define IFX_SSC_WHBGPOSTAT 0x00000078 -#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF -#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000 -#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask) - -/* address of the Receive Request Register of the SSC */ -#define IFX_SSC_RXREQ 0x00000080 -#define IFX_SSC_RXREQ_readmask 0x0000FFFF -#define IFX_SSC_RXREQ_writemask 0x0000FFFF -#define IFX_SSC_RXREQ_hwmask 0x00000000 -#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask) - -/* address of the Receive Count Register of the SSC */ -#define IFX_SSC_RXCNT 0x00000084 -#define IFX_SSC_RXCNT_readmask 0x0000FFFF -#define IFX_SSC_RXCNT_writemask 0x00000000 -#define IFX_SSC_RXCNT_hwmask 0x0000FFFF -#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask) - -/* address of the DMA Configuration Register of the SSC */ -#define IFX_SSC_DMACON 0x000000EC -#define IFX_SSC_DMACON_readmask 0x0000FFFF -#define IFX_SSC_DMACON_writemask 0x00000000 -#define IFX_SSC_DMACON_hwmask 0x0000FFFF -#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask) - -//------------------------------------------------------ -// interrupt register for enabling interrupts, mask register of irq_reg -#define IFX_SSC_IRN_EN 0xF4 -// read/write -#define IFX_SSC_IRN_EN_readmask 0x0000000F -#define IFX_SSC_IRN_EN_writemask 0x0000000F -#define IFX_SSC_IRN_EN_hwmask 0x00000000 -#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask) - -// interrupt register for accessing interrupts -#define IFX_SSC_IRN_CR 0xF8 -// read/write -#define IFX_SSC_IRN_CR_readmask 0x0000000F -#define IFX_SSC_IRN_CR_writemask 0x0000000F -#define IFX_SSC_IRN_CR_hwmask 0x0000000F -#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask) - -// interrupt register for stimulating interrupts -#define IFX_SSC_IRN_ICR 0xFC -// read/write -#define IFX_SSC_IRN_ICR_readmask 0x0000000F -#define IFX_SSC_IRN_ICR_writemask 0x0000000F -#define IFX_SSC_IRN_ICR_hwmask 0x00000000 -#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask) - -//--------------------------------------------------------------------- -// Number of IRQs and bitposition of IRQ -#define IFX_SSC_NUM_IRQ 4 -#define IFX_SSC_T_BIT 0x00000001 -#define IFX_SSC_R_BIT 0x00000002 -#define IFX_SSC_E_BIT 0x00000004 -#define IFX_SSC_F_BIT 0x00000008 - -/* bit masks for SSC registers */ - -/* ID register */ -#define IFX_SSC_PERID_REV_MASK 0x0000001F -#define IFX_SSC_PERID_CFG_MASK 0x00000020 -#define IFX_SSC_PERID_ID_MASK 0x0000FF00 -#define IFX_SSC_PERID_REV_OFFSET 0 -#define IFX_SSC_PERID_CFG_OFFSET 5 -#define IFX_SSC_PERID_ID_OFFSET 8 -#define IFX_SSC_PERID_ID 0x45 -#define IFX_SSC_PERID_DMA_ON 0x00000020 -#define IFX_SSC_PERID_RXFS_MASK 0x003F0000 -#define IFX_SSC_PERID_RXFS_OFFSET 16 -#define IFX_SSC_PERID_TXFS_MASK 0x3F000000 -#define IFX_SSC_PERID_TXFS_OFFSET 24 - -/* PISEL register */ -#define IFX_SSC_PISEL_MASTER_IN_A 0x0000 -#define IFX_SSC_PISEL_MASTER_IN_B 0x0001 -#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000 -#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002 -#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000 -#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004 - - -/* IFX_SSC_CON register */ -#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000 -#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000 -#define IFX_SSC_CON_IDLE_HIGH 0x00800000 -#define IFX_SSC_CON_IDLE_LOW 0x00000000 -#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000 -#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000 -#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16 -#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000 -#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK) - -#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000 -#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000 - -#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000 -#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800 -#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400 -#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000 -#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200 -#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100 -#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000 -#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00 -#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000 - -#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080 -#define IFX_SSC_CON_NO_LOOPBACK 0x00000000 -#define IFX_SSC_CON_HALF_DUPLEX 0x00000080 -#define IFX_SSC_CON_FULL_DUPLEX 0x00000000 -#define IFX_SSC_CON_CLOCK_FALL 0x00000040 -#define IFX_SSC_CON_CLOCK_RISE 0x00000000 -#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000 -#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020 -#define IFX_SSC_CON_MSB_FIRST 0x00000010 -#define IFX_SSC_CON_LSB_FIRST 0x00000000 -#define IFX_SSC_CON_ENABLE_CSB 0x00000008 -#define IFX_SSC_CON_DISABLE_CSB 0x00000000 -#define IFX_SSC_CON_INVERT_CSB 0x00000004 -#define IFX_SSC_CON_TRUE_CSB 0x00000000 -#define IFX_SSC_CON_RX_OFF 0x00000002 -#define IFX_SSC_CON_RX_ON 0x00000000 -#define IFX_SSC_CON_TX_OFF 0x00000001 -#define IFX_SSC_CON_TX_ON 0x00000000 - - -/* IFX_SSC_STATE register */ -#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28 -#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000 -#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24 -#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000 -#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET) -#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16 -#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000 -#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1) -#define IFX_SSC_STATE_BUSY 0x00002000 -#define IFX_SSC_STATE_RX_UFL 0x00001000 -#define IFX_SSC_STATE_TX_UFL 0x00000800 -#define IFX_SSC_STATE_ABORT_ERR 0x00000400 -#define IFX_SSC_STATE_RX_OFL 0x00000200 -#define IFX_SSC_STATE_TX_OFL 0x00000100 -#define IFX_SSC_STATE_MODE_ERR 0x00000080 -#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004 -#define IFX_SSC_STATE_IS_MASTER 0x00000002 -#define IFX_SSC_STATE_IS_ENABLED 0x00000001 - -/* WHBSTATE register */ -#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001 -#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001 -#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001 - -#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002 -#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002 -#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002 - -#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004 -#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004 - -#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008 -#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008 - -#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010 -#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020 - -#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040 -#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080 - -#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100 -#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200 -#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400 -#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800 -#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000 -#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000 -#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000 -#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000 -#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50 -#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0 - -/* BR register */ -#define IFX_SSC_BR_BAUDRATE_OFFSET 0 -#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF - -/* BR_STAT register */ -#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0 -#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF - -/* TB register */ -#define IFX_SSC_TB_DATA_OFFSET 0 -#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF - -/* RB register */ -#define IFX_SSC_RB_DATA_OFFSET 0 -#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF - - -/* RXFCON and TXFCON registers */ -#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000 -#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001 -#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002 -#define IFX_SSC_XFCON_ITL_MASK 0x00003F00 -#define IFX_SSC_XFCON_ITL_OFFSET 8 - -/* FSTAT register */ -#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0 -#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8 -#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00 - -/* GPOCON register */ -#define IFX_SSC_GPOCON_INVOUT0_POS 0 -#define IFX_SSC_GPOCON_INV_OUT0 0x00000001 -#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000 -#define IFX_SSC_GPOCON_INVOUT1_POS 1 -#define IFX_SSC_GPOCON_INV_OUT1 0x00000002 -#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000 -#define IFX_SSC_GPOCON_INVOUT2_POS 2 -#define IFX_SSC_GPOCON_INV_OUT2 0x00000003 -#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000 -#define IFX_SSC_GPOCON_INVOUT3_POS 3 -#define IFX_SSC_GPOCON_INV_OUT3 0x00000008 -#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000 -#define IFX_SSC_GPOCON_INVOUT4_POS 4 -#define IFX_SSC_GPOCON_INV_OUT4 0x00000010 -#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000 -#define IFX_SSC_GPOCON_INVOUT5_POS 5 -#define IFX_SSC_GPOCON_INV_OUT5 0x00000020 -#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000 -#define IFX_SSC_GPOCON_INVOUT6_POS 6 -#define IFX_SSC_GPOCON_INV_OUT6 0x00000040 -#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000 -#define IFX_SSC_GPOCON_INVOUT7_POS 7 -#define IFX_SSC_GPOCON_INV_OUT7 0x00000080 -#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000 -#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF -#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000 - -#define IFX_SSC_GPOCON_ISCSB0_POS 8 -#define IFX_SSC_GPOCON_IS_CSB0 0x00000100 -#define IFX_SSC_GPOCON_IS_GPO0 0x00000000 -#define IFX_SSC_GPOCON_ISCSB1_POS 9 -#define IFX_SSC_GPOCON_IS_CSB1 0x00000200 -#define IFX_SSC_GPOCON_IS_GPO1 0x00000000 -#define IFX_SSC_GPOCON_ISCSB2_POS 10 -#define IFX_SSC_GPOCON_IS_CSB2 0x00000400 -#define IFX_SSC_GPOCON_IS_GPO2 0x00000000 -#define IFX_SSC_GPOCON_ISCSB3_POS 11 -#define IFX_SSC_GPOCON_IS_CSB3 0x00000800 -#define IFX_SSC_GPOCON_IS_GPO3 0x00000000 -#define IFX_SSC_GPOCON_ISCSB4_POS 12 -#define IFX_SSC_GPOCON_IS_CSB4 0x00001000 -#define IFX_SSC_GPOCON_IS_GPO4 0x00000000 -#define IFX_SSC_GPOCON_ISCSB5_POS 13 -#define IFX_SSC_GPOCON_IS_CSB5 0x00002000 -#define IFX_SSC_GPOCON_IS_GPO5 0x00000000 -#define IFX_SSC_GPOCON_ISCSB6_POS 14 -#define IFX_SSC_GPOCON_IS_CSB6 0x00004000 -#define IFX_SSC_GPOCON_IS_GPO6 0x00000000 -#define IFX_SSC_GPOCON_ISCSB7_POS 15 -#define IFX_SSC_GPOCON_IS_CSB7 0x00008000 -#define IFX_SSC_GPOCON_IS_GPO7 0x00000000 -#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00 -#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000 - -/* GPOSTAT register */ -#define IFX_SSC_GPOSTAT_OUT0 0x00000001 -#define IFX_SSC_GPOSTAT_OUT1 0x00000002 -#define IFX_SSC_GPOSTAT_OUT2 0x00000004 -#define IFX_SSC_GPOSTAT_OUT3 0x00000008 -#define IFX_SSC_GPOSTAT_OUT4 0x00000010 -#define IFX_SSC_GPOSTAT_OUT5 0x00000020 -#define IFX_SSC_GPOSTAT_OUT6 0x00000040 -#define IFX_SSC_GPOSTAT_OUT7 0x00000080 -#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF - -/* WHBGPOSTAT register */ -#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001 -#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002 -#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004 -#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008 -#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010 -#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020 -#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040 -#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080 -#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF - -#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0 -#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1 -#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2 -#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3 -#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4 -#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5 -#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6 -#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7 - - -#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8 -#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100 -#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9 -#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200 -#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10 -#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400 -#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11 -#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800 -#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12 -#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000 -#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13 -#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000 -#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14 -#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000 -#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15 -#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000 -#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00 - -/* SFCON register */ -#define IFX_SSC_SFCON_SF_ENABLE 0x00000001 -#define IFX_SSC_SFCON_SF_DISABLE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004 -#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000 -#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008 -#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0 -#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4 -#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000 -#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16 -#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000 -#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18 -#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000 -#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000 -#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000 -#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000 -#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22 -#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096 -#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024 - -#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET) -#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) -#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK) -#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) - -/* SFSTAT register */ -#define IFX_SSC_SFSTAT_IN_DATA 0x00000001 -#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002 -#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0 -#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000 -#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20 - -#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET) -#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET) - -/* RXREQ register */ -#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF -#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0 - -/* RXCNT register */ -#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF -#define IFX_SSC_RXCNT_TODO_OFFSET 0 - -/* DMACON register */ -#define IFX_SSC_DMACON_RXON 0x00000001 -#define IFX_SSC_DMACON_RXOFF 0x00000000 -#define IFX_SSC_DMACON_TXON 0x00000002 -#define IFX_SSC_DMACON_TXOFF 0x00000000 -#define IFX_SSC_DMACON_DMAON 0x00000003 -#define IFX_SSC_DMACON_DMAOFF 0x00000000 -#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C -#define IFX_SSC_DMACON_CLASS_OFFSET 2 - -/* register access macros */ -#define ifx_ssc_fstat_received_words(status) (status & 0x003F) -#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8) - -#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE)) -#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON)) -#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE)) -#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB)) -#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB)) -#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT)) -#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR)) - -#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET) -#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - -#endif diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/irq.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/irq.h deleted file mode 100644 index c575dd64b2..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/irq.h +++ /dev/null @@ -1,200 +0,0 @@ -/* irq.h - AMAZON interrupts */ - -#ifndef __AMAZON_IRQ -#define __AMAZON_IRQ - -/************************************************************************ - * Interrupt information -*************************************************************************/ - -/* these vectors are to handle the interrupts from the internal AMAZON - interrupt controller. THe INT_NUM values are really just indices into - an array and are set up so that we can use the INT_NUM as a shift - to calculate a mask value. */ -#define INT_NUM_IRQ0 8 -#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) -#define INT_NUM_IM0_IRL1 (INT_NUM_IRQ0 + 1) -#define INT_NUM_IM0_IRL2 (INT_NUM_IRQ0 + 2) -#define INT_NUM_IM0_IRL3 (INT_NUM_IRQ0 + 3) -#define INT_NUM_IM0_IRL4 (INT_NUM_IRQ0 + 4) -#define INT_NUM_IM0_IRL5 (INT_NUM_IRQ0 + 5) -#define INT_NUM_IM0_IRL6 (INT_NUM_IRQ0 + 6) -#define INT_NUM_IM0_IRL7 (INT_NUM_IRQ0 + 7) -#define INT_NUM_IM0_IRL8 (INT_NUM_IRQ0 + 8) -#define INT_NUM_IM0_IRL9 (INT_NUM_IRQ0 + 9) -#define INT_NUM_IM0_IRL10 (INT_NUM_IRQ0 + 10) -#define INT_NUM_IM0_IRL11 (INT_NUM_IRQ0 + 11) -#define INT_NUM_IM0_IRL12 (INT_NUM_IRQ0 + 12) -#define INT_NUM_IM0_IRL13 (INT_NUM_IRQ0 + 13) -#define INT_NUM_IM0_IRL14 (INT_NUM_IRQ0 + 14) -#define INT_NUM_IM0_IRL15 (INT_NUM_IRQ0 + 15) -#define INT_NUM_IM0_IRL16 (INT_NUM_IRQ0 + 16) -#define INT_NUM_IM0_IRL17 (INT_NUM_IRQ0 + 17) -#define INT_NUM_IM0_IRL18 (INT_NUM_IRQ0 + 18) -#define INT_NUM_IM0_IRL19 (INT_NUM_IRQ0 + 19) -#define INT_NUM_IM0_IRL20 (INT_NUM_IRQ0 + 20) -#define INT_NUM_IM0_IRL21 (INT_NUM_IRQ0 + 21) -#define INT_NUM_IM0_IRL22 (INT_NUM_IRQ0 + 22) -#define INT_NUM_IM0_IRL23 (INT_NUM_IRQ0 + 23) -#define INT_NUM_IM0_IRL24 (INT_NUM_IRQ0 + 24) -#define INT_NUM_IM0_IRL25 (INT_NUM_IRQ0 + 25) -#define INT_NUM_IM0_IRL26 (INT_NUM_IRQ0 + 26) -#define INT_NUM_IM0_IRL27 (INT_NUM_IRQ0 + 27) -#define INT_NUM_IM0_IRL28 (INT_NUM_IRQ0 + 28) -#define INT_NUM_IM0_IRL29 (INT_NUM_IRQ0 + 29) -#define INT_NUM_IM0_IRL30 (INT_NUM_IRQ0 + 30) -#define INT_NUM_IM0_IRL31 (INT_NUM_IRQ0 + 31) - -#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) -#define INT_NUM_IM1_IRL1 (INT_NUM_IM1_IRL0 + 1) -#define INT_NUM_IM1_IRL2 (INT_NUM_IM1_IRL0 + 2) -#define INT_NUM_IM1_IRL3 (INT_NUM_IM1_IRL0 + 3) -#define INT_NUM_IM1_IRL4 (INT_NUM_IM1_IRL0 + 4) -#define INT_NUM_IM1_IRL5 (INT_NUM_IM1_IRL0 + 5) -#define INT_NUM_IM1_IRL6 (INT_NUM_IM1_IRL0 + 6) -#define INT_NUM_IM1_IRL7 (INT_NUM_IM1_IRL0 + 7) -#define INT_NUM_IM1_IRL8 (INT_NUM_IM1_IRL0 + 8) -#define INT_NUM_IM1_IRL9 (INT_NUM_IM1_IRL0 + 9) -#define INT_NUM_IM1_IRL10 (INT_NUM_IM1_IRL0 + 10) -#define INT_NUM_IM1_IRL11 (INT_NUM_IM1_IRL0 + 11) -#define INT_NUM_IM1_IRL12 (INT_NUM_IM1_IRL0 + 12) -#define INT_NUM_IM1_IRL13 (INT_NUM_IM1_IRL0 + 13) -#define INT_NUM_IM1_IRL14 (INT_NUM_IM1_IRL0 + 14) -#define INT_NUM_IM1_IRL15 (INT_NUM_IM1_IRL0 + 15) -#define INT_NUM_IM1_IRL16 (INT_NUM_IM1_IRL0 + 16) -#define INT_NUM_IM1_IRL17 (INT_NUM_IM1_IRL0 + 17) -#define INT_NUM_IM1_IRL18 (INT_NUM_IM1_IRL0 + 18) -#define INT_NUM_IM1_IRL19 (INT_NUM_IM1_IRL0 + 19) -#define INT_NUM_IM1_IRL20 (INT_NUM_IM1_IRL0 + 20) -#define INT_NUM_IM1_IRL21 (INT_NUM_IM1_IRL0 + 21) -#define INT_NUM_IM1_IRL22 (INT_NUM_IM1_IRL0 + 22) -#define INT_NUM_IM1_IRL23 (INT_NUM_IM1_IRL0 + 23) -#define INT_NUM_IM1_IRL24 (INT_NUM_IM1_IRL0 + 24) -#define INT_NUM_IM1_IRL25 (INT_NUM_IM1_IRL0 + 25) -#define INT_NUM_IM1_IRL26 (INT_NUM_IM1_IRL0 + 26) -#define INT_NUM_IM1_IRL27 (INT_NUM_IM1_IRL0 + 27) -#define INT_NUM_IM1_IRL28 (INT_NUM_IM1_IRL0 + 28) -#define INT_NUM_IM1_IRL29 (INT_NUM_IM1_IRL0 + 29) -#define INT_NUM_IM1_IRL30 (INT_NUM_IM1_IRL0 + 30) -#define INT_NUM_IM1_IRL31 (INT_NUM_IM1_IRL0 + 31) - -#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) -#define INT_NUM_IM2_IRL1 (INT_NUM_IM2_IRL0 + 1) -#define INT_NUM_IM2_IRL2 (INT_NUM_IM2_IRL0 + 2) -#define INT_NUM_IM2_IRL3 (INT_NUM_IM2_IRL0 + 3) -#define INT_NUM_IM2_IRL4 (INT_NUM_IM2_IRL0 + 4) -#define INT_NUM_IM2_IRL5 (INT_NUM_IM2_IRL0 + 5) -#define INT_NUM_IM2_IRL6 (INT_NUM_IM2_IRL0 + 6) -#define INT_NUM_IM2_IRL7 (INT_NUM_IM2_IRL0 + 7) -#define INT_NUM_IM2_IRL8 (INT_NUM_IM2_IRL0 + 8) -#define INT_NUM_IM2_IRL9 (INT_NUM_IM2_IRL0 + 9) -#define INT_NUM_IM2_IRL10 (INT_NUM_IM2_IRL0 + 10) -#define INT_NUM_IM2_IRL11 (INT_NUM_IM2_IRL0 + 11) -#define INT_NUM_IM2_IRL12 (INT_NUM_IM2_IRL0 + 12) -#define INT_NUM_IM2_IRL13 (INT_NUM_IM2_IRL0 + 13) -#define INT_NUM_IM2_IRL14 (INT_NUM_IM2_IRL0 + 14) -#define INT_NUM_IM2_IRL15 (INT_NUM_IM2_IRL0 + 15) -#define INT_NUM_IM2_IRL16 (INT_NUM_IM2_IRL0 + 16) -#define INT_NUM_IM2_IRL17 (INT_NUM_IM2_IRL0 + 17) -#define INT_NUM_IM2_IRL18 (INT_NUM_IM2_IRL0 + 18) -#define INT_NUM_IM2_IRL19 (INT_NUM_IM2_IRL0 + 19) -#define INT_NUM_IM2_IRL20 (INT_NUM_IM2_IRL0 + 20) -#define INT_NUM_IM2_IRL21 (INT_NUM_IM2_IRL0 + 21) -#define INT_NUM_IM2_IRL22 (INT_NUM_IM2_IRL0 + 22) -#define INT_NUM_IM2_IRL23 (INT_NUM_IM2_IRL0 + 23) -#define INT_NUM_IM2_IRL24 (INT_NUM_IM2_IRL0 + 24) -#define INT_NUM_IM2_IRL25 (INT_NUM_IM2_IRL0 + 25) -#define INT_NUM_IM2_IRL26 (INT_NUM_IM2_IRL0 + 26) -#define INT_NUM_IM2_IRL27 (INT_NUM_IM2_IRL0 + 27) -#define INT_NUM_IM2_IRL28 (INT_NUM_IM2_IRL0 + 28) -#define INT_NUM_IM2_IRL29 (INT_NUM_IM2_IRL0 + 29) -#define INT_NUM_IM2_IRL30 (INT_NUM_IM2_IRL0 + 30) -#define INT_NUM_IM2_IRL31 (INT_NUM_IM2_IRL0 + 31) - -#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) -#define INT_NUM_IM3_IRL1 (INT_NUM_IM3_IRL0 + 1) -#define INT_NUM_IM3_IRL2 (INT_NUM_IM3_IRL0 + 2) -#define INT_NUM_IM3_IRL3 (INT_NUM_IM3_IRL0 + 3) -#define INT_NUM_IM3_IRL4 (INT_NUM_IM3_IRL0 + 4) -#define INT_NUM_IM3_IRL5 (INT_NUM_IM3_IRL0 + 5) -#define INT_NUM_IM3_IRL6 (INT_NUM_IM3_IRL0 + 6) -#define INT_NUM_IM3_IRL7 (INT_NUM_IM3_IRL0 + 7) -#define INT_NUM_IM3_IRL8 (INT_NUM_IM3_IRL0 + 8) -#define INT_NUM_IM3_IRL9 (INT_NUM_IM3_IRL0 + 9) -#define INT_NUM_IM3_IRL10 (INT_NUM_IM3_IRL0 + 10) -#define INT_NUM_IM3_IRL11 (INT_NUM_IM3_IRL0 + 11) -#define INT_NUM_IM3_IRL12 (INT_NUM_IM3_IRL0 + 12) -#define INT_NUM_IM3_IRL13 (INT_NUM_IM3_IRL0 + 13) -#define INT_NUM_IM3_IRL14 (INT_NUM_IM3_IRL0 + 14) -#define INT_NUM_IM3_IRL15 (INT_NUM_IM3_IRL0 + 15) -#define INT_NUM_IM3_IRL16 (INT_NUM_IM3_IRL0 + 16) -#define INT_NUM_IM3_IRL17 (INT_NUM_IM3_IRL0 + 17) -#define INT_NUM_IM3_IRL18 (INT_NUM_IM3_IRL0 + 18) -#define INT_NUM_IM3_IRL19 (INT_NUM_IM3_IRL0 + 19) -#define INT_NUM_IM3_IRL20 (INT_NUM_IM3_IRL0 + 20) -#define INT_NUM_IM3_IRL21 (INT_NUM_IM3_IRL0 + 21) -#define INT_NUM_IM3_IRL22 (INT_NUM_IM3_IRL0 + 22) -#define INT_NUM_IM3_IRL23 (INT_NUM_IM3_IRL0 + 23) -#define INT_NUM_IM3_IRL24 (INT_NUM_IM3_IRL0 + 24) -#define INT_NUM_IM3_IRL25 (INT_NUM_IM3_IRL0 + 25) -#define INT_NUM_IM3_IRL26 (INT_NUM_IM3_IRL0 + 26) -#define INT_NUM_IM3_IRL27 (INT_NUM_IM3_IRL0 + 27) -#define INT_NUM_IM3_IRL28 (INT_NUM_IM3_IRL0 + 28) -#define INT_NUM_IM3_IRL29 (INT_NUM_IM3_IRL0 + 29) -#define INT_NUM_IM3_IRL30 (INT_NUM_IM3_IRL0 + 30) -#define INT_NUM_IM3_IRL31 (INT_NUM_IM3_IRL0 + 31) - -#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) -#define INT_NUM_IM4_IRL1 (INT_NUM_IM4_IRL0 + 1) -#define INT_NUM_IM4_IRL2 (INT_NUM_IM4_IRL0 + 2) -#define INT_NUM_IM4_IRL3 (INT_NUM_IM4_IRL0 + 3) -#define INT_NUM_IM4_IRL4 (INT_NUM_IM4_IRL0 + 4) -#define INT_NUM_IM4_IRL5 (INT_NUM_IM4_IRL0 + 5) -#define INT_NUM_IM4_IRL6 (INT_NUM_IM4_IRL0 + 6) -#define INT_NUM_IM4_IRL7 (INT_NUM_IM4_IRL0 + 7) -#define INT_NUM_IM4_IRL8 (INT_NUM_IM4_IRL0 + 8) -#define INT_NUM_IM4_IRL9 (INT_NUM_IM4_IRL0 + 9) -#define INT_NUM_IM4_IRL10 (INT_NUM_IM4_IRL0 + 10) -#define INT_NUM_IM4_IRL11 (INT_NUM_IM4_IRL0 + 11) -#define INT_NUM_IM4_IRL12 (INT_NUM_IM4_IRL0 + 12) -#define INT_NUM_IM4_IRL13 (INT_NUM_IM4_IRL0 + 13) -#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14) -#define INT_NUM_IM4_IRL15 (INT_NUM_IM4_IRL0 + 15) -#define INT_NUM_IM4_IRL16 (INT_NUM_IM4_IRL0 + 16) -#define INT_NUM_IM4_IRL17 (INT_NUM_IM4_IRL0 + 17) -#define INT_NUM_IM4_IRL18 (INT_NUM_IM4_IRL0 + 18) -#define INT_NUM_IM4_IRL19 (INT_NUM_IM4_IRL0 + 19) -#define INT_NUM_IM4_IRL20 (INT_NUM_IM4_IRL0 + 20) -#define INT_NUM_IM4_IRL21 (INT_NUM_IM4_IRL0 + 21) -#define INT_NUM_IM4_IRL22 (INT_NUM_IM4_IRL0 + 22) -#define INT_NUM_IM4_IRL23 (INT_NUM_IM4_IRL0 + 23) -#define INT_NUM_IM4_IRL24 (INT_NUM_IM4_IRL0 + 24) -#define INT_NUM_IM4_IRL25 (INT_NUM_IM4_IRL0 + 25) -#define INT_NUM_IM4_IRL26 (INT_NUM_IM4_IRL0 + 26) -#define INT_NUM_IM4_IRL27 (INT_NUM_IM4_IRL0 + 27) -#define INT_NUM_IM4_IRL28 (INT_NUM_IM4_IRL0 + 28) -#define INT_NUM_IM4_IRL29 (INT_NUM_IM4_IRL0 + 29) -#define INT_NUM_IM4_IRL30 (INT_NUM_IM4_IRL0 + 30) -#define INT_NUM_IM4_IRL31 (INT_NUM_IM4_IRL0 + 31) - -/****** Interrupt Assigments ***********/ -#define AMAZON_DMA_INT INT_NUM_IM0_IRL0 -#define IFX_SSC_TIR INT_NUM_IM0_IRL29 -#define IFX_SSC_RIR INT_NUM_IM0_IRL30 -#define IFX_SSC_EIR INT_NUM_IM0_IRL31 - -#define AMAZON_MEI_INT INT_NUM_IM2_IRL8 - -#define AMAZONASC_TIR INT_NUM_IM4_IRL15/* TX interrupt */ -#define AMAZONASC_RIR INT_NUM_IM4_IRL16/* RX interrupt */ -#define AMAZONASC_EIR INT_NUM_IM4_IRL17/* ERROR interrupt */ - -#define AMAZON_TIMER6_INT INT_NUM_IM1_IRL23 - -#define AMAZON_SWIE_INT INT_NUM_IM3_IRL8 -#define AMAZON_CBM_INT INT_NUM_IM3_IRL9 -#define AMAZON_AAL5_INT INT_NUM_IM3_IRL10 -#define AMAZON_HTU_INT INT_NUM_IM3_IRL11 -#define AMAZON_QSB_INT INT_NUM_IM3_IRL12 -#define MIPS_CPU_TIMER_IRQ 7 -#endif /* __AMAZON_IRQ */ diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/model.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/model.h deleted file mode 100644 index 4e43ab5f19..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/model.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef AMAZON_MODEL_H -#define AMAZON_MODEL_H -/****************************************************************************** - Copyright (c) 2002, Infineon Technologies. All rights reserved. - - No Warranty - Because the program is licensed free of charge, there is no warranty for - the program, to the extent permitted by applicable law. Except when - otherwise stated in writing the copyright holders and/or other parties - provide the program "as is" without warranty of any kind, either - expressed or implied, including, but not limited to, the implied - warranties of merchantability and fitness for a particular purpose. The - entire risk as to the quality and performance of the program is with - you. should the program prove defective, you assume the cost of all - necessary servicing, repair or correction. - - In no event unless required by applicable law or agreed to in writing - will any copyright holder, or any other party who may modify and/or - redistribute the program as permitted above, be liable to you for - damages, including any general, special, incidental or consequential - damages arising out of the use or inability to use the program - (including but not limited to loss of data or data being rendered - inaccurate or losses sustained by you or third parties or a failure of - the program to operate with any other programs), even if such holder or - other party has been advised of the possibility of such damages. -******************************************************************************/ -#define BOARD_SYSTEM_TYPE "AMAZON" -#define SYSTEM_MODEL_NAME "Amazon Gateway Package 3.2 Version" -#endif diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/port.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/port.h deleted file mode 100644 index 21825794c5..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/port.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * port.h - * - * Global Amazon port driver header file - * - */ - -/* Modification history */ -/* 21Jun2004 btxu Generate from Inca_IP project */ - - -#ifndef PORT_H -#define PORT_H - -struct amazon_port_ioctl_parm { - int port; - int pin; - int value; -}; -#define AMAZON_PORT_IOC_MAGIC 0xbf -#define AMAZON_PORT_IOCOD _IOW( AMAZON_PORT_IOC_MAGIC,0,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCPUDSEL _IOW( AMAZON_PORT_IOC_MAGIC,1,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCPUDEN _IOW( AMAZON_PORT_IOC_MAGIC,2,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCSTOFF _IOW( AMAZON_PORT_IOC_MAGIC,3,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCDIR _IOW( AMAZON_PORT_IOC_MAGIC,4,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCOUTPUT _IOW( AMAZON_PORT_IOC_MAGIC,5,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCINPUT _IOWR(AMAZON_PORT_IOC_MAGIC,6,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCALTSEL0 _IOW( AMAZON_PORT_IOC_MAGIC,7,struct amazon_port_ioctl_parm) -#define AMAZON_PORT_IOCALTSEL1 _IOW( AMAZON_PORT_IOC_MAGIC,8,struct amazon_port_ioctl_parm) - -int amazon_port_reserve_pin(int port, int pin, int module_id); -int amazon_port_free_pin(int port, int pin, int module_id); -int amazon_port_set_open_drain(int port, int pin, int module_id); -int amazon_port_clear_open_drain(int port, int pin, int module_id); -int amazon_port_set_pudsel(int port, int pin, int module_id); -int amazon_port_clear_pudsel(int port, int pin, int module_id); -int amazon_port_set_puden(int port, int pin, int module_id); -int amazon_port_clear_puden(int port, int pin, int module_id); -int amazon_port_set_stoff(int port, int pin, int module_id); -int amazon_port_clear_stoff(int port, int pin, int module_id); -int amazon_port_set_dir_out(int port, int pin, int module_id); -int amazon_port_set_dir_in(int port, int pin, int module_id); -int amazon_port_set_output(int port, int pin, int module_id); -int amazon_port_clear_output(int port, int pin, int module_id); -int amazon_port_get_input(int port, int pin, int module_id); - -int amazon_port_set_altsel0(int port, int pin, int module_id); -int amazon_port_clear_altsel0(int port, int pin, int module_id); -int amazon_port_set_altsel1(int port, int pin, int module_id); -int amazon_port_clear_altsel1(int port, int pin, int module_id); - - -#endif /* PORT_H */ - - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/amazon/serial.h b/target/linux/amazon-2.6/files/include/asm-mips/amazon/serial.h deleted file mode 100644 index 3ff3efc28d..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/amazon/serial.h +++ /dev/null @@ -1,146 +0,0 @@ -/* incaAscSio.h - (AMAZON) ASC UART tty driver header */ - -#ifndef __AMAZON_ASC_H -#define __AMAZON_ASC_H - -/* channel operating modes */ -#define ASCOPT_CSIZE 0x00000003 -#define ASCOPT_CS7 0x00000001 -#define ASCOPT_CS8 0x00000002 -#define ASCOPT_PARENB 0x00000004 -#define ASCOPT_STOPB 0x00000008 -#define ASCOPT_PARODD 0x00000010 -#define ASCOPT_CREAD 0x00000020 - -#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8) - -/* ASC input select (0 or 1) */ -#define CONSOLE_TTY 0 - -/* use fractional divider for baudrate settings */ -#define AMAZONASC_USE_FDV - -#ifdef AMAZONASC_USE_FDV - #define AMAZONASC_FDV_LOW_BAUDRATE 71 -#ifdef CONFIG_USE_IKOS - #define AMAZONASC_FDV_HIGH_BAUDRATE 443 -#else - #define AMAZONASC_FDV_HIGH_BAUDRATE 498 -#endif //CONFIG_USE_IKOS -#endif /*AMAZONASC_USE_FDV*/ - - -#define AMAZONASC_TXFIFO_FL 1 -#define AMAZONASC_RXFIFO_FL 1 -#define AMAZONASC_TXFIFO_FULL 16 - -/* interrupt lines masks for the ASC device interrupts*/ -/* change these macroses if it's necessary */ -#define AMAZONASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */ - -#define AMAZONASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */ -#define AMAZONASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */ -#define AMAZONASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */ -#define AMAZONASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/ - -/* CLC register's bits and bitfields */ -#define ASCCLC_DISR 0x00000001 -#define ASCCLC_DISS 0x00000002 -#define ASCCLC_RMCMASK 0x0000FF00 -#define ASCCLC_RMCOFFSET 8 - -/* CON register's bits and bitfields */ -#define ASCCON_MODEMASK 0x0007 - #define ASCCON_M_8SYNC 0x0 - #define ASCCON_M_8ASYNC 0x1 - #define ASCCON_M_8IRDAASYNC 0x2 - #define ASCCON_M_7ASYNCPAR 0x3 - #define ASCCON_M_9ASYNC 0x4 - #define ASCCON_M_8WAKEUPASYNC 0x5 - #define ASCCON_M_8ASYNCPAR 0x7 -#define ASCCON_STP 0x0008 -#define ASCCON_REN 0x0010 -#define ASCCON_PEN 0x0020 -#define ASCCON_FEN 0x0040 -#define ASCCON_OEN 0x0080 -#define ASCCON_PE 0x0100 -#define ASCCON_FE 0x0200 -#define ASCCON_OE 0x0400 -#define ASCCON_FDE 0x0800 -#define ASCCON_ODD 0x1000 -#define ASCCON_BRS 0x2000 -#define ASCCON_LB 0x4000 -#define ASCCON_R 0x8000 -#define ASCCON_ANY (ASCCON_PE|ASCCON_FE|ASCCON_OE) - -/* WHBCON register's bits and bitfields */ -#define ASCWHBCON_CLRREN 0x0010 -#define ASCWHBCON_SETREN 0x0020 -#define ASCWHBCON_CLRPE 0x0100 -#define ASCWHBCON_CLRFE 0x0200 -#define ASCWHBCON_CLROE 0x0400 -#define ASCWHBCON_SETPE 0x0800 -#define ASCWHBCON_SETFE 0x1000 -#define ASCWHBCON_SETOE 0x2000 - -/* ABCON register's bits and bitfields */ -#define ASCABCON_ABEN 0x0001 -#define ASCABCON_AUREN 0x0002 -#define ASCABCON_ABSTEN 0x0004 -#define ASCABCON_ABDETEN 0x0008 -#define ASCABCON_FCDETEN 0x0010 -#define ASCABCON_EMMASK 0x0300 - #define ASCABCON_EMOFF 8 - #define ASCABCON_EM_DISAB 0x0 - #define ASCABCON_EM_DURAB 0x1 - #define ASCABCON_EM_ALWAYS 0x2 -#define ASCABCON_TXINV 0x0400 -#define ASCABCON_RXINV 0x0800 - -/* FDV register mask, offset and bitfields*/ -#define ASCFDV_VALUE_MASK 0x000001FF - -/* WHBABCON register's bits and bitfields */ -#define ASCWHBABCON_SETABEN 0x0001 -#define ASCWHBABCON_CLRABEN 0x0002 - -/* ABSTAT register's bits and bitfields */ -#define ASCABSTAT_FCSDET 0x0001 -#define ASCABSTAT_FCCDET 0x0002 -#define ASCABSTAT_SCSDET 0x0004 -#define ASCABSTAT_SCCDET 0x0008 -#define ASCABSTAT_DETWAIT 0x0010 - -/* WHBABSTAT register's bits and bitfields */ -#define ASCWHBABSTAT_CLRFCSDET 0x0001 -#define ASCWHBABSTAT_SETFCSDET 0x0002 -#define ASCWHBABSTAT_CLRFCCDET 0x0004 -#define ASCWHBABSTAT_SETFCCDET 0x0008 -#define ASCWHBABSTAT_CLRSCSDET 0x0010 -#define ASCWHBABSTAT_SETSCSDET 0x0020 -#define ASCWHBABSTAT_SETSCCDET 0x0040 -#define ASCWHBABSTAT_CLRSCCDET 0x0080 -#define ASCWHBABSTAT_CLRDETWAIT 0x0100 -#define ASCWHBABSTAT_SETDETWAIT 0x0200 - -/* TXFCON register's bits and bitfields */ -#define ASCTXFCON_TXFEN 0x0001 -#define ASCTXFCON_TXFFLU 0x0002 -#define ASCTXFCON_TXTMEN 0x0004 -#define ASCTXFCON_TXFITLMASK 0x3F00 -#define ASCTXFCON_TXFITLOFF 8 - -/* RXFCON register's bits and bitfields */ -#define ASCRXFCON_RXFEN 0x0001 -#define ASCRXFCON_RXFFLU 0x0002 -#define ASCRXFCON_RXTMEN 0x0004 -#define ASCRXFCON_RXFITLMASK 0x3F00 -#define ASCRXFCON_RXFITLOFF 8 - -/* FSTAT register's bits and bitfields */ -#define ASCFSTAT_RXFFLMASK 0x003F -#define ASCFSTAT_TXFFLMASK 0x3F00 -#define ASCFSTAT_TXFFLOFF 8 - -#endif /* __AMAZON_ASC_H */ - diff --git a/target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/irq.h b/target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/irq.h deleted file mode 100644 index e72b7d5c11..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/irq.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __AMAZON_IRQ_H -#define __AMAZON_IRQ_H - -#define NR_IRQS 256 -#include_next - -#endif diff --git a/target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/mangle-port.h b/target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/mangle-port.h deleted file mode 100644 index 9aefebbe63..0000000000 --- a/target/linux/amazon-2.6/files/include/asm-mips/mach-amazon/mangle-port.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003, 2004 Ralf Baechle - */ -#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H -#define __ASM_MACH_GENERIC_MANGLE_PORT_H - -#define __swizzle_addr_b(port) (port) -#define __swizzle_addr_w(port) ((port) ^ 2) -#define __swizzle_addr_l(port) (port) -#define __swizzle_addr_q(port) (port) - -/* - * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; - * less sane hardware forces software to fiddle with this... - * - * Regardless, if the host bus endianness mismatches that of PCI/ISA, then - * you can't have the numerical value of data and byte addresses within - * multibyte quantities both preserved at the same time. Hence two - * variations of functions: non-prefixed ones that preserve the value - * and prefixed ones that preserve byte addresses. The latters are - * typically used for moving raw data between a peripheral and memory (cf. - * string I/O functions), hence the "__mem_" prefix. - */ -#if defined(CONFIG_SWAP_IO_SPACE) - -# define ioswabb(a,x) (x) -# define __mem_ioswabb(a,x) (x) -# define ioswabw(a,x) le16_to_cpu(x) -# define __mem_ioswabw(a,x) (x) -# define ioswabl(a,x) le32_to_cpu(x) -# define __mem_ioswabl(a,x) (x) -# define ioswabq(a,x) le64_to_cpu(x) -# define __mem_ioswabq(a,x) (x) - -#else - -# define ioswabb(a,x) (x) -# define __mem_ioswabb(a,x) (x) -# define ioswabw(a,x) (x) -# define __mem_ioswabw(a,x) cpu_to_le16(x) -# define ioswabl(a,x) (x) -# define __mem_ioswabl(a,x) cpu_to_le32(x) -# define ioswabq(a,x) (x) -# define __mem_ioswabq(a,x) cpu_to_le32(x) - -#endif - -#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */ diff --git a/target/linux/amazon-2.6/image/Makefile b/target/linux/amazon-2.6/image/Makefile deleted file mode 100644 index 29935f9241..0000000000 --- a/target/linux/amazon-2.6/image/Makefile +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Image/BuildKernel - $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma - mkimage -A mips -O linux -T kernel -C lzma -a 0x80002000 -e \ - 0x80002000 \ - -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ - -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage - - cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage -endef - -define Image/Build/squashfs - $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image) -endef - -define Image/Build - cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image - $(call Image/Build/$(1),$(1)) -endef - - -$(eval $(call BuildImage)) diff --git a/target/linux/amazon-2.6/patches/017-wdt-driver.patch b/target/linux/amazon-2.6/patches/017-wdt-driver.patch deleted file mode 100644 index b915ebe515..0000000000 --- a/target/linux/amazon-2.6/patches/017-wdt-driver.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- linux-2.6.21.5/drivers/char/watchdog/Makefile.orig 2007-08-05 11:13:29.177013987 +0200 -+++ linux-2.6.21.5/drivers/char/watchdog/Makefile 2007-08-05 11:13:52.190325445 +0200 -@@ -74,6 +74,7 @@ - # MIPS Architecture - obj-$(CONFIG_INDYDOG) += indydog.o - obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o -+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o - - # S390 Architecture - diff --git a/target/linux/amazon-2.6/patches/100-board.patch b/target/linux/amazon-2.6/patches/100-board.patch deleted file mode 100644 index 9b29141239..0000000000 --- a/target/linux/amazon-2.6/patches/100-board.patch +++ /dev/null @@ -1,63 +0,0 @@ -diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig ---- linux.old/arch/mips/Kconfig 2007-02-02 23:55:52.912446784 +0100 -+++ linux.dev/arch/mips/Kconfig 2007-02-03 21:50:25.262027104 +0100 -@@ -145,6 +145,17 @@ - note that a kernel built with this option selected will not be - able to run on normal units. - -+config AMAZON -+ bool "Amazon support (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select DMA_NONCOHERENT -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select HAVE_STD_PC_SERIAL_PORT -+ select SYS_SUPPORTS_BIG_ENDIAN -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_HAS_EARLY_PRINTK -+ - config MIPS_COBALT - bool "Cobalt Server" - select DMA_NONCOHERENT -@@ -766,6 +776,7 @@ - - endchoice - -+source "arch/mips/amazon/Kconfig" - source "arch/mips/ddb5xxx/Kconfig" - source "arch/mips/gt64120/ev64120/Kconfig" - source "arch/mips/jazz/Kconfig" -diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile ---- linux.old/arch/mips/Makefile 2007-02-02 23:55:52.913446632 +0100 -+++ linux.dev/arch/mips/Makefile 2007-02-03 17:40:29.193776000 +0100 -@@ -267,6 +267,13 @@ - load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 - - # -+# Infineon AMAZON -+# -+core-$(CONFIG_AMAZON) += arch/mips/amazon/ -+cflags-$(CONFIG_AMAZON) += -Iinclude/asm-mips/mach-amazon -+load-$(CONFIG_AMAZON) += 0xffffffff80002000 -+ -+# - # Cobalt Server - # - core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ -diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h ---- linux.old/include/asm-mips/bootinfo.h 2007-02-02 23:55:52.913446632 +0100 -+++ linux.dev/include/asm-mips/bootinfo.h 2007-02-03 17:51:02.531494032 +0100 -@@ -212,6 +212,12 @@ - #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ - #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ - -+/* -+ * Valid machtype for group ATHEROS -+ */ -+#define MACH_GROUP_INFINEON 27 -+#define MACH_INFINEON_AMAZON 0 -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); - diff --git a/target/linux/amazon-2.6/patches/110-char_drivers.patch b/target/linux/amazon-2.6/patches/110-char_drivers.patch deleted file mode 100644 index 73949646ff..0000000000 --- a/target/linux/amazon-2.6/patches/110-char_drivers.patch +++ /dev/null @@ -1,12 +0,0 @@ -Index: linux-2.6.21.5/drivers/char/Makefile -=================================================================== ---- linux-2.6.21.5.orig/drivers/char/Makefile 2007-06-24 07:44:10.606341712 +0200 -+++ linux-2.6.21.5/drivers/char/Makefile 2007-06-24 07:44:46.633864696 +0200 -@@ -103,6 +103,7 @@ - - obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o - obj-$(CONFIG_TCG_TPM) += tpm/ -+obj-$(CONFIG_AMAZONE_WDT) += amazone_wdt.o - - # Files generated that shall be removed upon make clean - clean-files := consolemap_deftbl.c defkeymap.c diff --git a/target/linux/amazon-2.6/patches/130-mtd_drivers.patch b/target/linux/amazon-2.6/patches/130-mtd_drivers.patch deleted file mode 100644 index 31f81640d9..0000000000 --- a/target/linux/amazon-2.6/patches/130-mtd_drivers.patch +++ /dev/null @@ -1,9 +0,0 @@ -Index: linux-2.6.21.5/drivers/mtd/maps/Makefile -=================================================================== ---- linux-2.6.21.5.orig/drivers/mtd/maps/Makefile 2007-06-24 07:55:22.138253344 +0200 -+++ linux-2.6.21.5/drivers/mtd/maps/Makefile 2007-06-24 07:56:58.207648576 +0200 -@@ -72,3 +72,4 @@ - obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o - obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o - obj-$(CONFIG_MTD_TQM834x) += tqm834x.o -+obj-$(CONFIG_AMAZON_MTD) += amazon.o diff --git a/target/linux/amazon-2.6/patches/140-net_drivers.patch b/target/linux/amazon-2.6/patches/140-net_drivers.patch deleted file mode 100644 index 65a0e446ed..0000000000 --- a/target/linux/amazon-2.6/patches/140-net_drivers.patch +++ /dev/null @@ -1,10 +0,0 @@ -Index: linux-2.6.21.5/drivers/net/Makefile -=================================================================== ---- linux-2.6.21.5.orig/drivers/net/Makefile 2007-06-24 09:03:20.308277264 +0200 -+++ linux-2.6.21.5/drivers/net/Makefile 2007-06-24 09:05:13.560060376 +0200 -@@ -219,3 +219,5 @@ - obj-$(CONFIG_FS_ENET) += fs_enet/ - - obj-$(CONFIG_NETXEN_NIC) += netxen/ -+ -+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o diff --git a/target/linux/amazon-2.6/patches/150-serial_driver.patch b/target/linux/amazon-2.6/patches/150-serial_driver.patch deleted file mode 100644 index 802c5c2a53..0000000000 --- a/target/linux/amazon-2.6/patches/150-serial_driver.patch +++ /dev/null @@ -1,12 +0,0 @@ -Index: linux-2.6.21.5/drivers/serial/Makefile -=================================================================== ---- linux-2.6.21.5.orig/drivers/serial/Makefile 2007-06-24 10:51:45.005412992 +0200 -+++ linux-2.6.21.5/drivers/serial/Makefile 2007-06-24 10:51:54.885910928 +0200 -@@ -5,6 +5,7 @@ - # - - obj-$(CONFIG_SERIAL_CORE) += serial_core.o -+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o - obj-$(CONFIG_SERIAL_21285) += 21285.o - obj-$(CONFIG_SERIAL_8250) += 8250.o - obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o diff --git a/target/linux/amazon-2.6/patches/160-cfi-swap.patch b/target/linux/amazon-2.6/patches/160-cfi-swap.patch deleted file mode 100644 index 9e20f0560c..0000000000 --- a/target/linux/amazon-2.6/patches/160-cfi-swap.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- linux-2.6.21.5/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-23 23:15:50.403369508 +0200 -+++ linux-2.6.21.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-23 23:26:43.028560499 +0200 -@@ -1007,7 +1007,9 @@ - int ret = 0; - map_word oldd; - int retry_cnt = 0; -- -+#ifdef CONFIG_AMAZON -+ adr ^= 2; -+#endif - adr += chip->start; - - spin_lock(chip->mutex); - diff --git a/target/linux/amazon/Makefile b/target/linux/amazon/Makefile new file mode 100644 index 0000000000..1967d52f42 --- /dev/null +++ b/target/linux/amazon/Makefile @@ -0,0 +1,25 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=mips +BOARD:=amazon +BOARDNAME:=Infineon Amazon +FEATURES:=squashfs jffs2 broken + +define Target/Description + Build firmware images for Infineon Amazon boards +endef + +KERNELNAME:="uImage" + +include $(INCLUDE_DIR)/kernel-build.mk + +# include the profiles +-include profiles/*.mk + +$(eval $(call BuildKernel)) diff --git a/target/linux/amazon/base-files/default/etc/config/network b/target/linux/amazon/base-files/default/etc/config/network new file mode 100644 index 0000000000..72e39f88a4 --- /dev/null +++ b/target/linux/amazon/base-files/default/etc/config/network @@ -0,0 +1,14 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth1 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 diff --git a/target/linux/amazon/config/default b/target/linux/amazon/config/default new file mode 100644 index 0000000000..2229e6317b --- /dev/null +++ b/target/linux/amazon/config/default @@ -0,0 +1,211 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_AMAZON=y +CONFIG_AMAZON_ASC_UART=y +CONFIG_AMAZON_MTD=y +CONFIG_AMAZON_NET_SW=y +CONFIG_AMAZON_PCI=y +CONFIG_AMAZON_WDT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +# CONFIG_ATM is not set +# CONFIG_ATMEL is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BCM43XX is not set +CONFIG_BITREVERSE=y +# CONFIG_BT is not set +CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh" +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_DDB5477 is not set +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_GENERIC_GPIO is not set +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +# CONFIG_GEN_RTC is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_STD_PC_SERIAL_PORT=y +# CONFIG_HERMES is not set +# CONFIG_HOSTAP is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +# CONFIG_I2C is not set +# CONFIG_IDE is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +CONFIG_IRQ_CPU=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_VR41XX is not set +CONFIG_MIPS=y +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_EV64120 is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_MTX1 is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_AMAZON_BUS_WIDTH_16=y +# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set +# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set +# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set +# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set +CONFIG_MTD_AMAZON_FLASH_SIZE_4=y +# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_START=0x0 +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_NET_PCI is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNPACPI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PRISM54 is not set +# CONFIG_RTC is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_SERIAL_8250 is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_TRAD_SIGNALS=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_USB is not set diff --git a/target/linux/amazon/files/arch/mips/amazon/Kconfig b/target/linux/amazon/files/arch/mips/amazon/Kconfig new file mode 100644 index 0000000000..179e35efd2 --- /dev/null +++ b/target/linux/amazon/files/arch/mips/amazon/Kconfig @@ -0,0 +1,63 @@ +# copyright 2007 john crispin + +menu "Amazon built-in" + +config AMAZON_ASC_UART + bool "Amazon asc uart" + select SERIAL_CORE + select SERIAL_CORE_CONSOLE + default y + +config AMAZON_PCI + bool "Amazon PCI support" + default y + select HW_HAS_PCI + select PCI + +config AMAZON_NET_SW + bool "Amazon network" + default y + +config AMAZON_WDT + bool "Amazon watchdog timer" + default y + +config AMAZON_MTD + bool "Amazon MTD map" + default y + +choice + prompt "Flash Size" + depends on AMAZON_MTD + +config MTD_AMAZON_FLASH_SIZE_2 + bool "2MB" + +config MTD_AMAZON_FLASH_SIZE_4 + bool "4MB" + +config MTD_AMAZON_FLASH_SIZE_8 + bool "8MB" + +config MTD_AMAZON_FLASH_SIZE_16 + bool "16MB" + +endchoice + +choice + prompt "Bus Width" + depends on AMAZON_MTD + +config MTD_AMAZON_BUS_WIDTH_8 + bool "8-bit" + +config MTD_AMAZON_BUS_WIDTH_16 + bool "16-bit" + +config MTD_AMAZON_BUS_WIDTH_32 + bool "32-bit" + +endchoice + + +endmenu diff --git a/target/linux/amazon/files/arch/mips/amazon/Makefile b/target/linux/amazon/files/arch/mips/amazon/Makefile new file mode 100644 index 0000000000..9cdc100b8c --- /dev/null +++ b/target/linux/amazon/files/arch/mips/amazon/Makefile @@ -0,0 +1,9 @@ +# +# Copyright 2007 openwrt.org +# John Crispin +# +# Makefile for Infineon Amazon +# +obj-y := dma-core.o interrupt.o prom.o setup.o +obj-$(CONFIG_PCI) += pci.o + diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.c b/target/linux/amazon/files/arch/mips/amazon/dma-core.c new file mode 100644 index 0000000000..242bc77af2 --- /dev/null +++ b/target/linux/amazon/files/arch/mips/amazon/dma-core.c @@ -0,0 +1,1455 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +//----------------------------------------------------------------------- +/* + * Description: + * Driver for Infineon Amazon DMA + */ +//----------------------------------------------------------------------- +/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] + * Created: 7-April-2004 + */ +//----------------------------------------------------------------------- +/* History + * Last changed on: 4-May-2004 + * Last changed by: + * Reason: debug + */ +//----------------------------------------------------------------------- +/* Last changed on: 03-Dec-2004 + * Last changed by: peng.liu@infineon.com + * Reason: recover from TPE bug + */ + +//000004:fchang 2005/6/2 Modified by Linpeng as described below +//----------------------------------------------------------------------- +/* Last changed on: 28-Jan-2004 + * Last changed by: peng.liu@infineon.com + * Reason: + * - handle "out of memory" bug + */ +//000003:tc.chen 2005/06/16 fix memory leak when Tx buffer full (heaving traffic). +//507261:tc.chen 2005/07/26 re-organize code address map to improve performance. + +#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS) +#define MODVERSIONS +#endif + +#if defined(MODVERSIONS) && !defined(__GENKSYMS__) +#include +#endif + +#ifndef EXPORT_SYMTAB +#define EXPORT_SYMTAB /* need this one 'cause we export symbols */ +#endif + +#undef DMA_NO_POLLING + +/* no TX interrupt handling */ +#define NO_TX_INT +/* need for DMA workaround */ +#undef AMAZON_DMA_TPE_AAL5_RECOVERY + +#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY +#define MAX_SYNC_FAILS 1000000 // 000004:fchang +unsigned int dma_sync_fails = 0; +unsigned int total_dma_tpe_reset = 0; +int (*tpe_reset) (void); +int (*tpe_start) (void); +int (*tpe_inject) (void); +#endif // AMAZON_DMA_TPE_AAL5_RECOVERY + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include "dma-core.h" + +#define AMAZON_DMA_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args) + +static irqreturn_t dma_interrupt(int irq, void *dev_id); +extern void mask_and_ack_amazon_irq(unsigned int irq_nr); + +/***************************************** global data *******************************************/ +u64 *g_desc_list; +dev_list *g_current_dev = NULL; +dev_list *g_head_dev = NULL; +dev_list *g_tail_dev = NULL; +channel_info g_log_chan[CHAN_TOTAL_NUM + 1]; +struct proc_dir_entry *g_amazon_dma_dir; +static u8 rx_chan_list_len = 0; +static u8 tx_chan_list_len = 0; +static int rx_chan_list[RX_CHAN_NUM + 1]; +static int tx_chan_list[TX_CHAN_NUM + 1]; +static u32 comb_isr_mask[CHAN_TOTAL_NUM]; + +static inline int is_rx_chan(int chan_no) +/*judge if this is an rx channel*/ +{ + int result = 0; + if (chan_no < RX_CHAN_NUM) + result = 1; + return result; +} + +/* Ugly, Channel ON register is badly mapped to channel no. */ +static u8 ch_on_mapping[CHAN_TOTAL_NUM] = + { 0, 1, 2, 3, 6, 7, 10, 4, 5, 8, 9, 11 }; + +/* Brief: check wether the chan_no is legal + * Parameter: chan_no: logical channel number + * Return: 0 if is not valid + * 1 if is valid + */ +static inline int is_valid_dma_ch(int chan_no) +{ + return ((chan_no >= 0) && (chan_no < CHAN_TOTAL_NUM)); +} + +/* Brief: check whether a channel is open through Channel ON register + * Parameter: chan_no: logical channel number + * Return: 1 channel is open + * 0 not yet + * EINVAL: invalid parameter + */ +static inline int is_channel_open(int chan_no) +{ + return (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) & + (1 << ch_on_mapping[chan_no])); +} + +/* Brief: add a list entry + * Description: + * always add to the tail and no redundancy allowed. (i.e. entries are unique) + * 0 : entry deleted + * <0 : not deleted (due to not unique) + */ +static inline int _add_list_entry(int *list, int size_of_list, int entry) +{ + int i; + for (i = 0; i < size_of_list; i++) { + if (list[i] == entry) + break; + if (list[i] < 0) { + list[i] = entry; + return 0; + } + } + return -1; +} + +/* Brief: delete a list entry + * Description: + * find the entry and remove it. shift all entries behind it one step forward if necessary\ + * Return: + * 0 : entry deleted + * <0 : not deleted (due to not found?) + */ +static inline int _delete_list_entry(int *list, int size_of_list, + int entry) +{ + int i, j; + for (i = 0; i < size_of_list; i++) { + if (list[i] == entry) { + for (j = i; j < size_of_list; j++) { + list[j] = list[j + 1]; + if (list[j + 1] < 0) { + break; + } + } + return 0; + } + } + return -1; +} + +/* Brief: enable a channel through Channel ON register + * Parameter: chan_no: logical channel number + * Description: + * Please don't open a channel without a valid descriptor (hardware pitfall) + */ +static inline void open_channel(int chan_no) +{ + AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) |= (1 << ch_on_mapping[chan_no]); + if (is_rx_chan(chan_no)) { + if (_add_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) { + rx_chan_list_len++; + } else { + AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no); + } + } else { + if (_add_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) { + tx_chan_list_len++; + } else { + AMAZON_DMA_DMSG("cannot add chan %d to open list\n", chan_no); + } + } +} + +/* Brief: disable a channel through Channel ON register + * Parameter: chan_no: logical channel number + */ + +static inline void close_channel(int chan_no) +{ + AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]); + if (is_rx_chan(chan_no)) { + if (_delete_list_entry(rx_chan_list, RX_CHAN_NUM, chan_no) == 0) { + rx_chan_list_len--; + } else { + AMAZON_DMA_DMSG("cannot remove chan %d from open list \n", + chan_no); + } + } else { + if (_delete_list_entry(tx_chan_list, TX_CHAN_NUM, chan_no) == 0) { + tx_chan_list_len--; + } else { + AMAZON_DMA_DMSG("cannot remove chan %d from open list \n", + chan_no); + } + } +} + +/* Brief: clear RX interrupt + */ +inline void rx_chan_clear_isr(int chan_no) +{ +#ifdef DMA_NO_POLLING + AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = + (AMAZON_DMA_REG32 + (AMAZON_DMA_CH0_ISR + + chan_no * + AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | DMA_ISR_CMDCPT + | DMA_ISR_DURR)); +#else + AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = + (AMAZON_DMA_REG32 + (AMAZON_DMA_CH0_ISR + + chan_no * + AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | + DMA_ISR_CMDCPT)); +#endif +} + + +/* Brief: hacking function, this will reset all descriptors back to DMA + */ +static void dma_reset_all_descriptors(int chan_no) +{ + volatile struct rx_desc *rx_desc_p = NULL; + int i; + rx_desc_p = + (struct rx_desc *) g_desc_list + + g_log_chan[chan_no].offset_from_base; + for (i = 0; i < g_log_chan[chan_no].desc_len; i++) { + rx_desc_p->status.word &= + (~(DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | DMA_DESC_CPT_SET)); + rx_desc_p->status.word |= + (DMA_DESC_OWN_DMA | g_log_chan[chan_no].packet_size); + rx_desc_p++; + } +} + +#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY +/* Brief: Reset DMA descriptors + */ +static void amazon_dma_reset_tpe_rx(int chan_no) +{ + struct tx_desc *tx_desc_p = NULL; + int j, i = 0; + + // wait until all TX channels stop transmitting + for (j = 9; j <= 10; j++) { + tx_desc_p = + (struct tx_desc *) g_desc_list + + g_log_chan[j].offset_from_base; + for (i = 0; i < g_log_chan[j].desc_len; i++) { + while ((tx_desc_p->status.field.OWN != CPU_OWN)) { + AMAZON_DMA_DMSG("DMA TX in progress\n"); // 000004:fchang + udelay(100); + } + tx_desc_p++; + } + } + + if (tpe_reset) { + total_dma_tpe_reset++; + AMAZON_DMA_DMSG + ("\n===============resetting TPE========================== \n"); + if ((*tpe_reset) ()) { + panic("cannot reset TPE engien\n"); // 000004:fchang + } + } else { + panic("no tpe_reset function\n"); // 000004:fchang + return; + } + dma_reset_all_descriptors(chan_no); + rx_chan_clear_isr(chan_no); + mb(); + + // send EoP + if (tpe_inject) { + if ((*tpe_inject) ()) { + panic("cannot inject a cell\n"); // 000004:fchang + } + } else { + AMAZON_DMA_EMSG("no tpe_inject function\n"); + return; + } + mb(); + while (1) { + if (AMAZON_DMA_REG32 + (AMAZON_DMA_CH0_ISR + + chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT)) { + rx_chan_clear_isr(chan_no); + mb(); + dma_reset_all_descriptors(chan_no); + if (g_log_chan[chan_no].current_desc == + (g_log_chan[chan_no].desc_len - 1)) { + g_log_chan[chan_no].current_desc = 0; + } else { + g_log_chan[chan_no].current_desc++; + } + break; + } + mdelay(1); + } + mb(); +#if 0 + AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) &= ~(1 << ch_on_mapping[chan_no]); + while (AMAZON_DMA_REG32(AMAZON_DMA_CH_ON) & + (1 << ch_on_mapping[chan_no])) { + printk("TPE channel still on\n"); + mdelay(1); + } + + // AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = (1<current_rx_chan = + chan_no - g_log_chan[chan_no].dma_dev->logic_rx_chan_base; + + // workaround for DMA pitfall: complete bit set happends before the + // other two bits (own,eop) are ready + if ((rx_desc_p->status.field.EoP != 1) + || (rx_desc_p->status.field.OWN != CPU_OWN) + || (rx_desc_p->status.field.data_length == + g_log_chan[chan_no].packet_size)) { +#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY + if (chan_no == 4 || chan_no == 5) { + dma_sync_fails++; + if (dma_sync_fails > MAX_SYNC_FAILS) { + // detect bug + rx_desc_p0 = + (struct rx_desc *) g_desc_list + + g_log_chan[chan_no].offset_from_base; + rx_desc_p1 = + (struct rx_desc *) g_desc_list + + g_log_chan[chan_no].offset_from_base + 1; + if ((rx_desc_p0->status.field.OWN == CPU_OWN + && rx_desc_p0->status.field.EoP != 1) + && (rx_desc_p1->status.field.OWN == CPU_OWN + && rx_desc_p1->status.field.EoP != 1)) { + amazon_dma_reset_tpe_rx(chan_no); + dma_sync_fails = 0; + return; + } + dma_sync_fails = 0; + AMAZON_DMA_DMSG("too many times ch:%d\n", chan_no); // 000004:fchang + return; + } + udelay(10); // 000004:fchang + } +#endif // //AMAZON_DMA_TPE_AAL5_RECOVERY + return; + } + + /* inform the upper layer to receive the packet */ + g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, RCV_INT); + /* check the next descriptor, if still contains the incoming packet, + then do not clear the interrupt status */ + rx_desc_p = + (struct rx_desc *) g_desc_list + + g_log_chan[chan_no].offset_from_base + + g_log_chan[chan_no].current_desc; + if (! + ((rx_desc_p->status.field.OWN == CPU_OWN) + && (rx_desc_p->status.field.C == 1))) { + rx_chan_clear_isr(chan_no); + } +} + + +/* Brief: TX channel interrupt handler + * Parameter: TX channel no + * Description: the interrupt handler for each TX channel + * 1. check all the descripters,if any of them had transmitted a packet, then free buffer + * because we cannot garantee the which one has already transmitted out, we have to go through all the descriptors here + * 2. clear the interrupt status bit + */ +inline void tx_chan_intr_handler(int chan_no) +{ + struct tx_desc *tx_desc_p = NULL; + int i = 0; + + tx_desc_p = + (struct tx_desc *) g_desc_list + + g_log_chan[chan_no].offset_from_base; + + for (i = 0; i < g_log_chan[chan_no].desc_len; i++) { + if ((tx_desc_p->status.field.OWN == CPU_OWN) + && (tx_desc_p->status.field.C == 1)) { + /* if already transmitted, then free the buffer */ + g_log_chan[chan_no]. + buffer_free((u8 *) __va(tx_desc_p->Data_Pointer), + g_log_chan[chan_no].opt[i]); + tx_desc_p->status.field.C = 0; + /* inform the upper layer about the completion of the + transmitted packet, the upper layer may want to free the + packet */ + g_log_chan[chan_no].intr_handler(g_log_chan[chan_no].dma_dev, + TRANSMIT_CPT_INT); + } + tx_desc_p++; + } + + /* after all these operations, clear the interrupt status bit */ + AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + chan_no * AMAZON_DMA_CH_STEP) = + (AMAZON_DMA_REG32 + (AMAZON_DMA_CH0_ISR + + chan_no * + AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP | + DMA_ISR_CMDCPT)); +} + +/* Brief: DMA interrupt handler + */ +static irqreturn_t dma_interrupt(int irq, void *dev_id) +{ + int i = 0; + int chan_no; + u32 isr = 0; +#ifdef NO_TX_INT // 000004:fchang + static int cnt = 0; // 000004:fchang +#endif // 000004:fchang + while ((isr = + AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)) & (COMB_ISR_RX_MASK | + COMB_ISR_TX_MASK)) { + if (isr & COMB_ISR_RX_MASK) { + // RX Channels: start WFQ algorithm + chan_no = CHAN_TOTAL_NUM; + for (i = 0; i < RX_CHAN_NUM; i++) { + if ((isr & (comb_isr_mask[i])) + && (g_log_chan[i].weight > 0)) { + if (g_log_chan[chan_no].weight < g_log_chan[i].weight) { + chan_no = i; + } + } + } + if (chan_no < CHAN_TOTAL_NUM) { + rx_chan_intr_handler(chan_no); + } else { + for (i = 0; i < RX_CHAN_NUM; i++) { + g_log_chan[i].weight = g_log_chan[i].default_weight; + } + } + } +#ifdef NO_TX_INT + cnt++; + if (cnt == 10) { + cnt = 0; + for (i = 0; i < tx_chan_list_len; i++) { + if (AMAZON_DMA_REG32 + (AMAZON_DMA_CH0_ISR + + tx_chan_list[i] * + AMAZON_DMA_CH_STEP) & (DMA_ISR_CPT | DMA_ISR_EOP)) { + tx_chan_intr_handler(tx_chan_list[i]); + } + } + } +#else + if (isr & COMB_ISR_TX_MASK) { + // TX channels: RR + for (i = 0; i < tx_chan_list_len; i++) { + if (isr & (comb_isr_mask[tx_chan_list[i]])) { + tx_chan_intr_handler(tx_chan_list[i]); + } + } + } +#endif + } // while + return IRQ_HANDLED; +} + + +/* Brief: read a packet from DMA RX channel + * Parameter: + * Return: packet length + * Description: + * This is called back in a context of DMA interrupt + * 1. prepare new descriptor + * 2. read data + * 3. update WFQ weight + */ +//507261:tc.chen int dma_device_read(struct dma_device_info* dma_dev, u8** dataptr, void** opt) +int asmlinkage dma_device_read(struct dma_device_info *dma_dev, + u8 ** dataptr, void **opt) +{ + u8 *buf; + int len; + int chan_no = 0; + int byte_offset = 0; + + struct rx_desc *rx_desc_p; + void *p = NULL; + int current_desc; + + chan_no = dma_dev->logic_rx_chan_base + dma_dev->current_rx_chan; + current_desc = g_log_chan[chan_no].current_desc; + rx_desc_p = + (struct rx_desc *) (g_desc_list + + g_log_chan[chan_no].offset_from_base + + current_desc); + buf = (u8 *) __va(rx_desc_p->Data_Pointer); /* extract the virtual + address of the data + pointer */ + len = rx_desc_p->status.field.data_length; /* extract the data length */ +#ifndef CONFIG_MIPS_UNCACHED + dma_cache_inv((unsigned long) buf, len); +#endif // CONFIG_MIPS_UNCACHED + *(u32 *) dataptr = (u32) buf; + if (opt) { + *(int *) opt = (int) g_log_chan[chan_no].opt[current_desc]; /* read + out + the + opt + information */ + } + + buf = + (u8 *) g_log_chan[chan_no].buffer_alloc(g_log_chan[chan_no]. + packet_size, &byte_offset, + &p); + // should check null!!!! + if (buf == NULL || p == NULL) { + *(u32 *) dataptr = 0; + *(int *) opt = 0; + len = 0; + } else { + g_log_chan[chan_no].opt[current_desc] = p; + /* reduce the weight for WFQ algorithm */ + g_log_chan[chan_no].weight -= len; + rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buf); + } + if (current_desc == g_log_chan[chan_no].desc_len - 1) { + current_desc = 0; + } else { + current_desc++; + } + g_log_chan[chan_no].current_desc = current_desc; + + rx_desc_p->status.word = DMA_DESC_OWN_DMA + | (byte_offset << DMA_DESC_BYTEOFF_SHIFT) + | g_log_chan[chan_no].packet_size; + return len; +} + +/* Brief: write a packet through DMA RX channel to peripheral + * Parameter: + * Return: packet length + * Description: + * + */ +u64 dma_tx_drop = 0; +//507261:tc.chen int dma_device_write(struct dma_device_info* dma_dev, u8* dataptr, int len,void* opt) +int asmlinkage dma_device_write(struct dma_device_info *dma_dev, + u8 * dataptr, int len, void *opt) +{ + int chan_no = 0; + struct tx_desc *tx_desc_p; + + int byte_offset = 0; + int current_desc; + static int cnt = 0; // 000004:fchang + + unsigned long flag; + local_irq_save(flag); + + chan_no = dma_dev->logic_tx_chan_base + dma_dev->current_tx_chan; + current_desc = g_log_chan[chan_no].current_desc; + tx_desc_p = + (struct tx_desc *) (g_desc_list + + g_log_chan[chan_no].offset_from_base + + current_desc); + // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){ + if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen + AMAZON_DMA_DMSG("no TX desc for CPU, drop packet\n"); + dma_tx_drop++; + g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT); + local_irq_restore(flag); + return 0; + } + g_log_chan[chan_no].opt[current_desc] = opt; + + /* byte offset----to adjust the starting address of the data buffer, + should be multiple of the burst length. */ + byte_offset = + ((u32) CPHYSADDR((u32) dataptr)) % (g_log_chan[chan_no].burst_len * + 4); +#ifndef CONFIG_MIPS_UNCACHED + dma_cache_wback((unsigned long) dataptr, len); + wmb(); +#endif // CONFIG_MIPS_UNCACHED + + tx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) dataptr) - byte_offset; + wmb(); + tx_desc_p->status.word = DMA_DESC_OWN_DMA + | DMA_DESC_SOP_SET + | DMA_DESC_EOP_SET | (byte_offset << DMA_DESC_BYTEOFF_SHIFT) + | len; + wmb(); + if (is_channel_open(chan_no) == 0) { + // turn on if necessary + open_channel(chan_no); + } +#ifdef DMA_NO_POLLING + if ((AMAZON_DMA_REG32 + (AMAZON_DMA_CH0_ISR + + chan_no * AMAZON_DMA_CH_STEP) & (DMA_ISR_DURR | DMA_ISR_CPT)) == + (DMA_ISR_DURR)) { + // clear DURR if (CPT is AND set and DURR is set) + AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR + + chan_no * AMAZON_DMA_CH_STEP) = DMA_ISR_DURR; + } +#endif + + if (current_desc == (g_log_chan[chan_no].desc_len - 1)) { + current_desc = 0; + } else { + current_desc++; + } + + + g_log_chan[chan_no].current_desc = current_desc; + tx_desc_p = + (struct tx_desc *) (g_desc_list + + g_log_chan[chan_no].offset_from_base + + current_desc); + // 000003:tc.chen if(tx_desc_p->status.field.OWN==DMA_OWN){ + if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C == 1) { // 000003:tc.chen + g_log_chan[chan_no].intr_handler(dma_dev, TX_BUF_FULL_INT); + } +#ifdef NO_TX_INT +//000004:fchang Start + cnt++; + if (cnt == 5) { + cnt = 0; + tx_chan_intr_handler(chan_no); + } +//000004:fchang End +#endif + local_irq_restore(flag); // 000004:fchang + return len; +} + + + +int desc_list_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int i; + u32 *p = (u32 *) g_desc_list; + int len = 0; + len += sprintf(buf + len, "descriptor list:\n"); + for (i = 0; i < 120; i++) { + len += sprintf(buf + len, "%d\n", i); + len += sprintf(buf + len, "%08x\n", *(p + i * 2 + 1)); + len += sprintf(buf + len, "%08x\n", *(p + i * 2)); + + } + + return len; + +} + +int channel_weight_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + + // int i=0; + int len = 0; + len += sprintf(buf + len, "Qos dma channel weight list\n"); + len += + sprintf(buf + len, + "channel_num default_weight current_weight device Tx/Rx\n"); + len += + sprintf(buf + len, + " 0 %08x %08x Switch Rx0\n", + g_log_chan[0].default_weight, g_log_chan[0].weight); + len += + sprintf(buf + len, + " 1 %08x %08x Switch Rx1\n", + g_log_chan[1].default_weight, g_log_chan[1].weight); + len += + sprintf(buf + len, + " 2 %08x %08x Switch Rx2\n", + g_log_chan[2].default_weight, g_log_chan[2].weight); + len += + sprintf(buf + len, + " 3 %08x %08x Switch Rx3\n", + g_log_chan[3].default_weight, g_log_chan[3].weight); + len += + sprintf(buf + len, + " 4 %08x %08x Switch Tx0\n", + g_log_chan[4].default_weight, g_log_chan[4].weight); + len += + sprintf(buf + len, + " 5 %08x %08x Switch Tx1\n", + g_log_chan[5].default_weight, g_log_chan[5].weight); + /* + len+=sprintf(buf+len," 6 %08x %08x TPE + Rx0\n",g_log_chan[6].default_weight, g_log_chan[6].weight); + len+=sprintf(buf+len," 7 %08x %08x TPE + Rx0\n",g_log_chan[7].default_weight, g_log_chan[7].weight); + len+=sprintf(buf+len," 8 %08x %08x TPE + Tx0\n",g_log_chan[8].default_weight, g_log_chan[8].weight); + len+=sprintf(buf+len," 9 %08x %08x TPE + Rx0\n",g_log_chan[9].default_weight, g_log_chan[9].weight); + len+=sprintf(buf+len," 10 %08x %08x DPLUS + Rx0\n",g_log_chan[10].default_weight, g_log_chan[10].weight); + len+=sprintf(buf+len," 11 %08x %08x DPLUS + Rx0\n",g_log_chan[11].default_weight, g_log_chan[11].weight); */ + return len; +} + +int dma_register_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + dev_list *temp_dev; + int len = 0;; + + len += sprintf(buf + len, "amazon dma driver\n"); + len += sprintf(buf + len, "version 1.0\n"); + len += sprintf(buf + len, "devices registered:\n"); + for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { + len += sprintf(buf + len, "%s ", temp_dev->dev->device_name); + } + len += sprintf(buf + len, "\n"); + len += sprintf(buf + len, "CH_ON=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_ON)); + len += sprintf(buf + len, "CH_RST=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH_RST)); + len += sprintf(buf + len, "CH0_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH0_ISR)); + len += sprintf(buf + len, "CH1_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH1_ISR)); + len += sprintf(buf + len, "CH2_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH2_ISR)); + len += sprintf(buf + len, "CH3_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH3_ISR)); + len += sprintf(buf + len, "CH4_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH4_ISR)); + len += sprintf(buf + len, "CH5_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH5_ISR)); + len += sprintf(buf + len, "CH6_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH6_ISR)); + len += sprintf(buf + len, "CH7_ISR=%08x\n", AMAZON_DMA_REG32(AMAZON_DMA_CH7_ISR)); + len += sprintf(buf + len, "CH8_ISR=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH8_ISR)); + len += + sprintf(buf + len, "CH9_ISR=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH9_ISR)); + len += + sprintf(buf + len, "CH10_ISR=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH10_ISR)); + len += + sprintf(buf + len, "CH11_ISR=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH11_ISR)); + len += + sprintf(buf + len, "LCH0_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK)); + len += + sprintf(buf + len, "LCH1_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH1_MSK)); + len += + sprintf(buf + len, "LCH2_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH2_MSK)); + len += + sprintf(buf + len, "LCH3_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH3_MSK)); + len += + sprintf(buf + len, "LCH4_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH4_MSK)); + len += + sprintf(buf + len, "LCH5_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH5_MSK)); + len += + sprintf(buf + len, "LCH6_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH6_MSK)); + len += + sprintf(buf + len, "LCH7_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH7_MSK)); + len += + sprintf(buf + len, "LCH8_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH8_MSK)); + len += + sprintf(buf + len, "LCH9_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH9_MSK)); + len += + sprintf(buf + len, "LCH10_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH10_MSK)); + len += + sprintf(buf + len, "LCH11_MSK=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH11_MSK)); + len += + sprintf(buf + len, "Desc_BA=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA)); + len += + sprintf(buf + len, "LCH0_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN)); + len += + sprintf(buf + len, "LCH1_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_LEN)); + len += + sprintf(buf + len, "LCH2_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_LEN)); + len += + sprintf(buf + len, "LCH3_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_LEN)); + len += + sprintf(buf + len, "LCH4_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_LEN)); + len += + sprintf(buf + len, "LCH5_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_LEN)); + len += + sprintf(buf + len, "LCH6_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_LEN)); + len += + sprintf(buf + len, "LCH7_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_LEN)); + len += + sprintf(buf + len, "LCH8_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_LEN)); + len += + sprintf(buf + len, "LCH9_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_LEN)); + len += + sprintf(buf + len, "LCH10_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_LEN)); + len += + sprintf(buf + len, "LCH11_DES_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_LEN)); + len += + sprintf(buf + len, "LCH1_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST)); + len += + sprintf(buf + len, "LCH2_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH2_DES_OFST)); + len += + sprintf(buf + len, "LCH3_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH3_DES_OFST)); + len += + sprintf(buf + len, "LCH4_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH4_DES_OFST)); + len += + sprintf(buf + len, "LCH5_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH5_DES_OFST)); + len += + sprintf(buf + len, "LCH6_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH6_DES_OFST)); + len += + sprintf(buf + len, "LCH7_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH7_DES_OFST)); + len += + sprintf(buf + len, "LCH8_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH8_DES_OFST)); + len += + sprintf(buf + len, "LCH9_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH9_DES_OFST)); + len += + sprintf(buf + len, "LCH10_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH10_DES_OFST)); + len += + sprintf(buf + len, "LCH11_DES_OFST=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH11_DES_OFST)); + len += + sprintf(buf + len, "AMAZON_DMA_SW_BL=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_SW_BL)); + len += + sprintf(buf + len, "AMAZON_DMA_TPE_BL=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_TPE_BL)); + len += + sprintf(buf + len, "DPlus2FPI_BL=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_DPlus2FPI_BL)); + len += + sprintf(buf + len, "GRX_BUF_LEN=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN)); + len += + sprintf(buf + len, "DMA_ECON_REG=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG)); + len += + sprintf(buf + len, "POLLING_REG=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG)); + len += + sprintf(buf + len, "CH_WGT=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_CH_WGT)); + len += + sprintf(buf + len, "TX_WGT=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_TX_WGT)); + len += + sprintf(buf + len, "DPlus2FPI_CLASS=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_DPLus2FPI_CLASS)); + len += + sprintf(buf + len, "COMB_ISR=%08x\n", + AMAZON_DMA_REG32(AMAZON_DMA_COMB_ISR)); +#ifdef AMAZON_DMA_TPE_AAL5_RECOVERY + len += sprintf(buf + len, "TPE fails:%u\n", total_dma_tpe_reset); // 000004:fchang +#endif + return len; +} + +/* Brief: initialize DMA registers + * Description: + */ +static void dma_chip_init(void) +{ + int i; + for (i = 0; i < CHAN_TOTAL_NUM; i++) { + AMAZON_DMA_REG32(AMAZON_DMA_CH1_DES_OFST + + i * AMAZON_DMA_CH_STEP) = DEFAULT_OFFSET; + } +#ifdef DMA_NO_POLLING + AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = 0; +#else + // enable poll mode and set polling counter + AMAZON_DMA_REG32(AMAZON_DMA_POLLING_REG) = DMA_POLLING_CNT | DMA_POLLING_ENABLE; +#endif + // to enable DMA drop + AMAZON_DMA_REG32(AMAZON_DMA_GRX_BUF_LEN) = 0x10000; +} + +int insert_dev_list(dev_list * dev) +{ + dev_list *temp_dev; + if (g_head_dev == NULL) { + g_head_dev = dev; + g_tail_dev = dev; + dev->prev = NULL; + dev->next = NULL; + } else { + for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { + if (temp_dev->weight < dev->weight) { + if (temp_dev->prev) + temp_dev->prev->next = dev; + + dev->prev = temp_dev->prev; + dev->next = temp_dev; + temp_dev->prev = dev; + if (temp_dev == g_head_dev) + g_head_dev = dev; + break; + } + } + + if (!temp_dev) { + g_tail_dev->next = dev; + dev->prev = g_tail_dev; + dev->next = NULL; + g_tail_dev = dev; + } + + } + + return 1; +} + +u8 *common_buffer_alloc(int len, int *byte_offset, void **opt) +{ + u8 *buffer = (u8 *) kmalloc(len * sizeof(u8), GFP_KERNEL); + *byte_offset = 0; + return buffer; + +} + +int common_buffer_free(u8 * dataptr, void *opt) +{ + if (dataptr) + kfree(dataptr); + return 0; +} + + +int register_dev(struct dma_device_info *dma_dev) +{ + int i, j, temp; + int burst_reg = 0; + u8 *buffer; + void *p = NULL; + int byte_offset = 0; + + struct rx_desc *rx_desc_p; + struct tx_desc *tx_desc_p; + if (strcmp(dma_dev->device_name, "switch1") == 0) { + AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH1_RST_MASK; // resest + // channel + // 1st + AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian + // conversion + // for Switch + burst_reg = AMAZON_DMA_SW_BL; + dma_dev->logic_rx_chan_base = switch_rx_chan_base; + dma_dev->logic_tx_chan_base = switch_tx_chan_base; + } + + else if (strcmp(dma_dev->device_name, "switch2") == 0) { + AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = SWITCH2_RST_MASK; // resest + // channel + // 1st + AMAZON_DMA_REG32(AMAZON_DMA_DMA_ECON_REG) |= 0x3; // endian + // conversion + // for Switch + burst_reg = AMAZON_DMA_SW_BL; + dma_dev->logic_rx_chan_base = switch2_rx_chan_base; + dma_dev->logic_tx_chan_base = switch2_tx_chan_base; + + } else if (strcmp(dma_dev->device_name, "TPE") == 0) { + AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = TPE_RST_MASK; // resest + // channel 1st + // + burst_reg = AMAZON_DMA_TPE_BL; + dma_dev->logic_rx_chan_base = TPE_rx_chan_base; + dma_dev->logic_tx_chan_base = TPE_tx_chan_base; + } + + else if (strcmp(dma_dev->device_name, "DPlus") == 0) { + AMAZON_DMA_REG32(AMAZON_DMA_CH_RST) = DPlus2FPI_RST_MASK; // resest + // channel + // 1st + dma_dev->logic_rx_chan_base = DPLus2FPI_rx_chan_base; + dma_dev->logic_tx_chan_base = DPLus2FPI_tx_chan_base; + + } + + i = 0; + for (temp = dma_dev->tx_burst_len; temp > 2; temp /= 2) { + i += 1; + } + + + AMAZON_DMA_REG32(burst_reg) = i << 1; + i = 0; + for (temp = dma_dev->rx_burst_len; temp > 2; temp /= 2) { + i += 1; + } + AMAZON_DMA_REG32(burst_reg) += i; + + for (i = 0; i < dma_dev->num_rx_chan; i++) { + + temp = dma_dev->logic_rx_chan_base + i; + g_log_chan[temp].dma_dev = dma_dev; + g_log_chan[temp].weight = dma_dev->rx_chan[i].weight; + g_log_chan[temp].default_weight = dma_dev->rx_chan[i].weight; + g_log_chan[temp].current_desc = 0; + g_log_chan[temp].desc_ofst = DEFAULT_OFFSET; + g_log_chan[temp].desc_len = dma_dev->rx_chan[i].desc_num; + g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET; + g_log_chan[temp].packet_size = dma_dev->rx_chan[i].packet_size; + + AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->rx_chan[i].desc_num; + // enable interrupt mask + if (temp == 4 || temp == 5) { + AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x32; + } else { + AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36; + } + strcpy(g_log_chan[temp].device_name, dma_dev->device_name); + g_log_chan[temp].burst_len = dma_dev->rx_burst_len; + g_log_chan[temp].control = dma_dev->rx_chan[i].control; + + + /* specify the buffer allocation and free method */ + if (dma_dev->buffer_alloc) + g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc; + else + g_log_chan[temp].buffer_alloc = common_buffer_alloc; + + if (dma_dev->buffer_free) + g_log_chan[temp].buffer_free = dma_dev->buffer_free; + else + g_log_chan[temp].buffer_free = common_buffer_free; + + if (dma_dev->intr_handler) + g_log_chan[temp].intr_handler = dma_dev->intr_handler; + else + g_log_chan[temp].intr_handler = NULL; + + for (j = 0; j < g_log_chan[temp].desc_len; j++) { + rx_desc_p = (struct rx_desc *) (g_desc_list + g_log_chan[temp].offset_from_base + j); + rx_desc_p->status.word = 0; + rx_desc_p->status.field.data_length = g_log_chan[temp].packet_size; + buffer = (u8 *) g_log_chan[temp].buffer_alloc(g_log_chan[temp].packet_size, &byte_offset, &p); + rx_desc_p->Data_Pointer = (u32) CPHYSADDR((u32) buffer); + rx_desc_p->status.field.byte_offset = byte_offset; + /* fix me, should check if the addresss comply with the burst + lenght requirment */ + g_log_chan[temp].opt[j] = p; + rx_desc_p->status.field.OWN = DMA_OWN; + + } + /* open or close the channel */ + if (g_log_chan[temp].control) + open_channel(temp); + else + close_channel(temp); + } + + for (i = 0; i < dma_dev->num_tx_chan; i++) { + temp = dma_dev->logic_tx_chan_base + i; + g_log_chan[temp].dma_dev = dma_dev; + g_log_chan[temp].weight = dma_dev->tx_chan[i].weight; + g_log_chan[temp].default_weight = dma_dev->tx_chan[i].weight; + g_log_chan[temp].current_desc = 0; + g_log_chan[temp].desc_ofst = DEFAULT_OFFSET; + g_log_chan[temp].desc_len = dma_dev->tx_chan[i].desc_num; + g_log_chan[temp].offset_from_base = temp * DEFAULT_OFFSET; + g_log_chan[temp].packet_size = dma_dev->tx_chan[i].packet_size; + + AMAZON_DMA_REG32(AMAZON_DMA_CH0_DES_LEN + temp * AMAZON_DMA_CH_STEP) = dma_dev->tx_chan[i].desc_num; + // enable interrupt mask +#ifdef NO_TX_INT + AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x3e; +#else + AMAZON_DMA_REG32(AMAZON_DMA_CH0_MSK + temp * AMAZON_DMA_CH_STEP) = 0x36; +#endif + + strcpy(g_log_chan[temp].device_name, dma_dev->device_name); + g_log_chan[temp].burst_len = dma_dev->tx_burst_len; + g_log_chan[temp].control = dma_dev->tx_chan[i].control; + + if (dma_dev->buffer_alloc) + g_log_chan[temp].buffer_alloc = dma_dev->buffer_alloc; + else + g_log_chan[temp].buffer_alloc = common_buffer_alloc; + + if (dma_dev->buffer_free) + g_log_chan[temp].buffer_free = dma_dev->buffer_free; + else + g_log_chan[temp].buffer_free = common_buffer_free; + + if (dma_dev->intr_handler) + g_log_chan[temp].intr_handler = dma_dev->intr_handler; + else + g_log_chan[temp].intr_handler = NULL; + + for (j = 0; j < g_log_chan[temp].desc_len; j++) { + + tx_desc_p = + (struct tx_desc *) (g_desc_list + + g_log_chan[temp].offset_from_base + j); + tx_desc_p->status.word = 0; + tx_desc_p->status.field.data_length = + g_log_chan[temp].packet_size; + tx_desc_p->status.field.OWN = CPU_OWN; + + } + /* workaround DMA pitfall, we never turn on channel if we don't + have proper descriptors */ + if (!g_log_chan[temp].control) { + close_channel(temp); + } + + } + + return 0; +} + +int dma_device_register(struct dma_device_info *dma_dev) +{ + dev_list *temp_dev; + temp_dev = (dev_list *) kmalloc(sizeof(dev_list), GFP_KERNEL); + temp_dev->dev = dma_dev; + temp_dev->weight = dma_dev->weight; + insert_dev_list(temp_dev); + /* check whether this is a known device */ + if ((strcmp(dma_dev->device_name, "switch1") == 0) + || (strcmp(dma_dev->device_name, "TPE") == 0) + || (strcmp(dma_dev->device_name, "switch2") == 0) + || (strcmp(dma_dev->device_name, "DPlus") == 0)) { + register_dev(dma_dev); + } + + return 0; +} + + +int unregister_dev(struct dma_device_info *dma_dev) +{ + int i, j, temp; + u8 *buffer; + struct rx_desc *rx_desc_p; + + for (i = 0; i < dma_dev->num_rx_chan; i++) { + temp = dma_dev->logic_rx_chan_base + i; + close_channel(temp); + for (j = 0; j < g_log_chan[temp].desc_len; j++) { + rx_desc_p = + (struct rx_desc *) (g_desc_list + + g_log_chan[temp].offset_from_base + j); + buffer = (u8 *) __va(rx_desc_p->Data_Pointer); + g_log_chan[temp].buffer_free(buffer, g_log_chan[temp].opt[j]); + } + } + for (i = 0; i < dma_dev->num_tx_chan; i++) { + temp = dma_dev->logic_tx_chan_base + i; + close_channel(temp); + } + return 0; +} + +int dma_device_unregister(struct dma_device_info *dev) +{ + dev_list *temp_dev; + for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { + if (strcmp(dev->device_name, temp_dev->dev->device_name) == 0) { + if ((strcmp(dev->device_name, "switch1") == 0) + || (strcmp(dev->device_name, "TPE") == 0) + || (strcmp(dev->device_name, "switch2") == 0) + || (strcmp(dev->device_name, "DPlus") == 0)) + unregister_dev(dev); + if (temp_dev == g_head_dev) { + g_head_dev = temp_dev->next; + kfree(temp_dev); + } else { + if (temp_dev == g_tail_dev) + g_tail_dev = temp_dev->prev; + if (temp_dev->prev) + temp_dev->prev->next = temp_dev->next; + if (temp_dev->next) + temp_dev->next->prev = temp_dev->prev; + kfree(temp_dev); + } + break; + } + + } + return 0; +} + +void dma_device_update_rx(struct dma_device_info *dma_dev) +{ + int i, temp; + for (i = 0; i < dma_dev->num_rx_chan; i++) { + temp = dma_dev->logic_rx_chan_base + i; + g_log_chan[temp].control = dma_dev->rx_chan[i].control; + + if (g_log_chan[temp].control) + open_channel(temp); + else + close_channel(temp); + } + +} + +void dma_device_update_tx(struct dma_device_info *dma_dev) +{ + int i, temp; + for (i = 0; i < dma_dev->num_tx_chan; i++) { + temp = dma_dev->logic_tx_chan_base + i; + g_log_chan[temp].control = dma_dev->tx_chan[i].control; + if (g_log_chan[temp].control) { + /* we turn on channel when send out the very first packet */ + // open_channel(temp); + } else + close_channel(temp); + } +} + +int dma_device_update(struct dma_device_info *dma_dev) +{ + dma_device_update_rx(dma_dev); + dma_device_update_tx(dma_dev); + return 0; +} + +static int dma_open(struct inode *inode, struct file *file) +{ + return 0; +} + +static int dma_release(struct inode *inode, struct file *file) +{ + /* release the resources */ + return 0; +} + +static int dma_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + int value = 0; + int result = 0; + int chan_no = 0; + + switch (cmd) { + case 0: /* get register value */ + break; + case 1: /* return channel weight */ + chan_no = *((int *) arg); + *((int *) arg + 1) = g_log_chan[chan_no].default_weight; + break; + case 2: /* set channel weight */ + chan_no = *((int *) arg); + value = *((int *) arg + 1); + printk("new weight=%08x\n", value); + g_log_chan[chan_no].default_weight = value; + break; + default: + break; + } + return result; +} + + +static struct file_operations dma_fops = { + owner:THIS_MODULE, + open:dma_open, + release:dma_release, + ioctl:dma_ioctl, +}; + +static int dma_init(void) +{ + int result = 0; + int i; + printk("initialising dma core\n"); + result = register_chrdev(DMA_MAJOR, "dma-core", &dma_fops); + if (result) { + AMAZON_DMA_EMSG("cannot register device dma-core!\n"); + return result; + } + result = request_irq(AMAZON_DMA_INT, dma_interrupt, SA_INTERRUPT, "dma-core", (void *) &dma_interrupt); + if (result) { + AMAZON_DMA_EMSG("error, cannot get dma_irq!\n"); + free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt); + return -EFAULT; + } + + g_desc_list = (u64 *) KSEG1ADDR(__get_free_page(GFP_DMA)); + + if (g_desc_list == NULL) { + AMAZON_DMA_EMSG("no memory for desriptor\n"); + return -ENOMEM; + } + memset(g_desc_list, 0, PAGE_SIZE); + AMAZON_DMA_REG32(AMAZON_DMA_Desc_BA) = (u32) CPHYSADDR((u32) g_desc_list); + g_amazon_dma_dir = proc_mkdir("amazon_dma", NULL); + create_proc_read_entry("dma_register", 0, g_amazon_dma_dir, dma_register_proc_read, NULL); + create_proc_read_entry("g_desc_list", 0, g_amazon_dma_dir, desc_list_proc_read, NULL); + create_proc_read_entry("channel_weight", 0, g_amazon_dma_dir, channel_weight_proc_read, NULL); + + dma_chip_init(); + for (i = 0; i < (RX_CHAN_NUM + 1); i++) { + rx_chan_list[i] = -1; + } + for (i = 0; i < (TX_CHAN_NUM + 1); i++) { + tx_chan_list[i] = -1; + } + + for (i = 0; i < CHAN_TOTAL_NUM; i++) { + comb_isr_mask[i] = 0x80000000 >> (i); + } + + g_log_chan[CHAN_TOTAL_NUM].weight = 0; + printk("initialising dma core ... done\n"); + + return 0; +} + +arch_initcall(dma_init); + + +void dma_cleanup(void) +{ + dev_list *temp_dev; + + unregister_chrdev(DMA_MAJOR, "dma-core"); + for (temp_dev = g_head_dev; temp_dev; temp_dev = temp_dev->next) { + kfree(temp_dev); + } + free_page(KSEG0ADDR((unsigned long) g_desc_list)); + remove_proc_entry("channel_weight", g_amazon_dma_dir); + remove_proc_entry("dma_list", g_amazon_dma_dir); + remove_proc_entry("dma_register", g_amazon_dma_dir); + remove_proc_entry("amazon_dma", NULL); + /* release the resources */ + free_irq(AMAZON_DMA_INT, (void *) &dma_interrupt); +} + +EXPORT_SYMBOL(dma_device_register); +EXPORT_SYMBOL(dma_device_unregister); +EXPORT_SYMBOL(dma_device_read); +EXPORT_SYMBOL(dma_device_write); +EXPORT_SYMBOL(dma_device_update); +EXPORT_SYMBOL(dma_device_update_rx); + +MODULE_LICENSE("GPL"); diff --git a/target/linux/amazon/files/arch/mips/amazon/dma-core.h b/target/linux/amazon/files/arch/mips/amazon/dma-core.h new file mode 100644 index 0000000000..cb3d456c95 --- /dev/null +++ b/target/linux/amazon/files/arch/mips/amazon/dma-core.h @@ -0,0 +1,69 @@ +#ifndef DMA_CORE_H +#define DMA_CORE_H + +#define AMAZON_DMA_REG32(reg_num) *((volatile u32*)(reg_num)) +#define AMAZON_DMA_CH_STEP 4 + +#define COMB_ISR_RX_MASK 0xfe000000 +#define COMB_ISR_TX_MASK 0x01f00000 + + +#define DMA_OWN 1 +#define CPU_OWN 0 +#define DMA_MAJOR 250 + +//Descriptors +#define DMA_DESC_OWN_CPU 0x0 +#define DMA_DESC_OWN_DMA 0x80000000 +#define DMA_DESC_CPT_SET 0x40000000 +#define DMA_DESC_SOP_SET 0x20000000 +#define DMA_DESC_EOP_SET 0x10000000 + +#define switch_rx_chan_base 0 +#define switch_tx_chan_base 7 +#define switch2_rx_chan_base 2 +#define switch2_tx_chan_base 8 +#define TPE_rx_chan_base 4 +#define TPE_tx_chan_base 9 +#define DPLus2FPI_rx_chan_base 6 +#define DPLus2FPI_tx_chan_base 11 + +#define RX_CHAN_NUM 7 +#define TX_CHAN_NUM 5 +#define CHAN_TOTAL_NUM (RX_CHAN_NUM+TX_CHAN_NUM) +#define DEFAULT_OFFSET 20 +#define DESCRIPTOR_SIZE 8 + +typedef struct dev_list{ + struct dma_device_info* dev; + int weight; + struct dev_list* prev; + struct dev_list* next; +}dev_list; + +typedef struct channel_info{ + char device_name[16]; + int occupied; + enum attr_t attr; + int current_desc; + int weight; + int default_weight; + int desc_num; + int burst_len; + int desc_len; + int desc_ofst; + int packet_size; + int offset_from_base; + int control; + void* opt[DEFAULT_OFFSET]; + u8* (*buffer_alloc)(int len,int* offset, void** opt); + int (*buffer_free)(u8* dataptr,void* opt); + int (*intr_handler)(struct dma_device_info* info,int status); + + struct dma_device_info* dma_dev; +}channel_info; + + + +#endif + diff --git a/target/linux/amazon/files/arch/mips/amazon/interrupt.c b/target/linux/amazon/files/arch/mips/amazon/interrupt.c new file mode 100644 index 0000000000..5e34e0577b --- /dev/null +++ b/target/linux/amazon/files/arch/mips/amazon/interrupt.c @@ -0,0 +1,186 @@ +/* + * Gary Jennejohn (C) 2003 + * Copyright (C) 2007 Felix Fietkau + * Copyright (C) 2007 John Crispin + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Routines for generic manipulation of the interrupts found on the + * AMAZON boards. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +static void amazon_disable_irq(unsigned int irq_nr) +{ + int i; + u32 amazon_ier = AMAZON_ICU_IM0_IER; + + if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0) + amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier); + else { + irq_nr -= INT_NUM_IRQ0; + for (i = 0; i <= 4; i++) + { + if (irq_nr <= 31) + amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier); + amazon_ier += 0x10; + irq_nr -= 32; + } + } +} + +static void amazon_mask_and_ack_irq(unsigned int irq_nr) +{ + int i; + u32 amazon_ier = AMAZON_ICU_IM0_IER; + u32 amazon_isr = AMAZON_ICU_IM0_ISR; + + if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0){ + amazon_writel(amazon_readl(amazon_ier) & (~(AMAZON_DMA_H_MASK)), amazon_ier); + amazon_writel(AMAZON_DMA_H_MASK, amazon_isr); + } else { + irq_nr -= INT_NUM_IRQ0; + for (i = 0; i <= 4; i++) + { + if (irq_nr <= 31){ + amazon_writel(amazon_readl(amazon_ier) & ~(1 << irq_nr ), amazon_ier); + amazon_writel((1 << irq_nr ), amazon_isr); + } + amazon_ier += 0x10; + amazon_isr += 0x10; + irq_nr -= 32; + } + } +} + +static void amazon_enable_irq(unsigned int irq_nr) +{ + int i; + u32 amazon_ier = AMAZON_ICU_IM0_IER; + + if (irq_nr <= INT_NUM_IM0_IRL11 && irq_nr >= INT_NUM_IM0_IRL0) + amazon_writel(amazon_readl(amazon_ier) | AMAZON_DMA_H_MASK, amazon_ier); + else { + irq_nr -= INT_NUM_IRQ0; + for (i = 0; i <= 4; i++) + { + if (irq_nr <= 31) + amazon_writel(amazon_readl(amazon_ier) | (1 << irq_nr ), amazon_ier); + amazon_ier += 0x10; + irq_nr -= 32; + } + } +} + +static unsigned int amazon_startup_irq(unsigned int irq) +{ + amazon_enable_irq(irq); + return 0; +} + +static void amazon_end_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) { + amazon_enable_irq(irq); + } +} + +static struct hw_interrupt_type amazon_irq_type = { + "AMAZON", + .startup = amazon_startup_irq, + .enable = amazon_enable_irq, + .disable = amazon_disable_irq, + .unmask = amazon_enable_irq, + .ack = amazon_mask_and_ack_irq, + .mask = amazon_disable_irq, + .mask_ack = amazon_mask_and_ack_irq, + .end = amazon_end_irq +}; + +/* Cascaded interrupts from IM0-4 */ +static inline void amazon_hw_irqdispatch(u8 line) +{ + u32 irq; + + irq = (amazon_readl(AMAZON_ICU_IM_VEC) >> (line * 5)) & AMAZON_ICU_IM0_VEC_MASK; + if (line == 0 && irq <= 11 && irq >= 0) { + //DMA fixed to IM0_IRL0 + irq = 0; + } + do_IRQ(irq + INT_NUM_IRQ0 + (line * 32)); +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + if (pending & CAUSEF_IP7){ + do_IRQ(MIPS_CPU_TIMER_IRQ); + goto out; + } else { + unsigned int i; + for (i = 0; i <= 4; i++) + { + if(pending & (CAUSEF_IP2 << i)){ + amazon_hw_irqdispatch(i); + goto out; + } + } + } + printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); +out: + return; +} + +static struct irqaction cascade = { + .handler = no_action, + .flags = SA_INTERRUPT, + .name = "cascade", +}; + +void __init arch_init_irq(void) +{ + int i; + + /* mask all interrupt sources */ + for(i = 0; i <= 4; i++){ + amazon_writel(0, AMAZON_ICU_IM0_IER + (i * 0x10)); + } + + mips_cpu_irq_init(); + + /* set up irq cascade */ + for (i = 2; i <= 6; i++) { + setup_irq(i, &cascade); + } + + for (i = INT_NUM_IRQ0; i <= INT_NUM_IM4_IRL31; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = 0; + irq_desc[i].depth = 1; + set_irq_chip(i, &amazon_irq_type); + } +} diff --git a/target/linux/amazon/files/arch/mips/amazon/pci.c b/target/linux/amazon/files/arch/mips/amazon/pci.c new file mode 100644 index 0000000000..ab305a983c --- /dev/null +++ b/target/linux/amazon/files/arch/mips/amazon/pci.c @@ -0,0 +1,293 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved. + * Copyright (C) 2007 Felix Fietkau + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ + +/* FIXME: convert nasty volatile register derefs to readl/writel calls */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AMAZON_PCI_REG32( addr ) (*(volatile u32 *)(addr)) +#ifndef AMAZON_PCI_MEM_BASE +#define AMAZON_PCI_MEM_BASE 0xb2000000 +#endif +#define AMAZON_PCI_MEM_SIZE 0x00400000 +#define AMAZON_PCI_IO_BASE 0xb2400000 +#define AMAZON_PCI_IO_SIZE 0x00002000 + +#define AMAZON_PCI_CFG_BUSNUM_SHF 16 +#define AMAZON_PCI_CFG_DEVNUM_SHF 11 +#define AMAZON_PCI_CFG_FUNNUM_SHF 8 + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +static inline u32 amazon_r32(u32 addr) +{ + u32 *ptr = (u32 *) addr; + return __raw_readl(ptr); +} + +static inline void amazon_w32(u32 addr, u32 val) +{ + u32 *ptr = (u32 *) addr; + __raw_writel(val, ptr); +} + + +static struct resource pci_io_resource = { + .name = "io pci IO space", +#if 0 + .start = AMAZON_PCI_IO_BASE, + .end = AMAZON_PCI_IO_BASE + AMAZON_PCI_IO_SIZE - 1, +#endif + .start = 0, + .end = AMAZON_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource pci_mem_resource = { + .name = "ext pci memory space", + .start = AMAZON_PCI_MEM_BASE, + .end = AMAZON_PCI_MEM_BASE + AMAZON_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +static inline u32 amazon_pci_swap(u32 val) +{ +#ifdef CONFIG_AMAZON_PCI_HW_SWAP + return swab32(val); +#else + return val; +#endif +} + +static int amazon_pci_config_access(unsigned char access_type, + struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data) +{ + unsigned long flags; + u32 pci_addr; + u32 val; + int ret; + + /* Amazon support slot from 0 to 15 */ + /* devfn 0 & 0x20 is itself */ + if ((bus != 0) || (devfn == 0) || (devfn == 0x20)) + return 1; + + pci_addr=AMAZON_PCI_CFG_BASE | + bus->number << AMAZON_PCI_CFG_BUSNUM_SHF | + devfn << AMAZON_PCI_CFG_FUNNUM_SHF | + (where & ~0x3); + + local_irq_save(flags); + if (access_type == PCI_ACCESS_WRITE) { + val = amazon_pci_swap(*data); + ret = put_dbe(val, (u32 *)pci_addr); + } else { + ret = get_dbe(val, (u32 *)pci_addr); + *data = amazon_pci_swap(val); + } + + amazon_w32(PCI_MODE, amazon_r32(PCI_MODE) & (~(1<> ((where & 3) << 3)) & 0xff; + break; + case 2: + *((u16 *) val) = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + *val = data; + break; + default: + return -1; + } + + return ret; +} + + +static int amazon_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) +{ + if (size != 4) { + u32 data; + + if (amazon_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return -1; + + if (size == 1) + val = (data & ~(0xff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); + else if (size == 2) + val = (data & ~(0xffff << ((where & 3) << 3))) | (val << ((where & 3) << 3)); + else + return -1; + } + + if (amazon_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops amazon_pci_ops = { + amazon_pci_read, + amazon_pci_write +}; + +static struct pci_controller amazon_pci_controller = { + .pci_ops = &amazon_pci_ops, + .mem_resource = &pci_mem_resource, + .io_resource = &pci_io_resource +}; + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + switch (slot) { + case 13: + /* IDSEL = AD29 --> USB Host Controller */ + return INT_NUM_IM2_IRL15; + case 14: + /* IDSEL = AD30 --> mini PCI connector */ + return INT_NUM_IM2_IRL14; + default: + printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin); + return 0; + } +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + switch(dev->irq) { + case INT_NUM_IM2_IRL15: + /* + * IDSEL = AD29 --> USB Host Controller + * PCI_INTA/B/C--GPIO Port0.2--EXIN3 + * IN/ALT0:1 ALT1:0 + * PULL UP + */ + (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffb; + (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 4; + (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffb; + (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 4; + (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 4; + //External Interrupt Node + (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x6000; /* Low Level triggered */ + (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x8; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + break; + case INT_NUM_IM2_IRL14: + /* + * IDSEL = AD30 --> mini PCI connector + * PCI_INTA--GPIO Port0.1--EXIN2 + * IN/ALT0:1 ALT1:0 + * PULL UP + */ + (*AMAZON_GPIO_P0_DIR) = (*AMAZON_GPIO_P0_DIR) & 0xfffffffd; + (*AMAZON_GPIO_P0_ALTSEL0) = (*AMAZON_GPIO_P0_ALTSEL0)| 2; + (*AMAZON_GPIO_P0_ALTSEL1) = (*AMAZON_GPIO_P0_ALTSEL1)& 0xfffffffd; + (*AMAZON_GPIO_P0_PUDSEL) = (*AMAZON_GPIO_P0_PUDSEL) | 2; + (*AMAZON_GPIO_P0_PUDEN) = (*AMAZON_GPIO_P0_PUDEN) | 2; + //External Interrupt Node + (*AMAZON_ICU_EXTINTCR) = (*AMAZON_ICU_EXTINTCR)|0x600; + (*AMAZON_ICU_IRNEN) = (*AMAZON_ICU_IRNEN)|0x4; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + break; + default: + return 1; + } + return 0; +} + +int amazon_pci_init(void) +{ + u32 temp_buffer; + +#ifdef CONFIG_AMAZON_PCI_HW_SWAP + AMAZON_PCI_REG32(IRM) = AMAZON_PCI_REG32(IRM) | (1<<27) | (1<<28); + wmb(); +#endif + + AMAZON_PCI_REG32(CLOCK_CONTROL) = AMAZON_PCI_REG32(CLOCK_CONTROL) | (1< + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +void prom_putchar(char c) +{ + /* Wait for FIFO to empty */ + while ((amazon_readl(AMAZON_ASC_FSTAT) >> 8) != 0x00) ; + /* Crude cr/nl handling is better than none */ + if(c == '\n') + amazon_writel('\r', AMAZON_ASC_TBUF); + amazon_writel(c, AMAZON_ASC_TBUF); +} + +void prom_printf(const char * fmt, ...) +{ + va_list args; + int l; + char *p, *buf_end; + char buf[1024]; + + va_start(args, fmt); + /* FIXME - hopefully i < sizeof(buf) */ + l = vsprintf(buf, fmt, args); + va_end(args); + buf_end = buf + l; + + for (p = buf; p < buf_end; p++) + prom_putchar(*p); +} + + +void __init prom_init(void) +{ + mips_machgroup = MACH_GROUP_INFINEON; + mips_machtype = MACH_INFINEON_AMAZON; + + strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit"); + + add_memory_region(0x00000000, 0x1000000, BOOT_MEM_RAM); +} + +void prom_free_prom_memory(void) +{ +} + +const char *get_system_type(void) +{ + return BOARD_SYSTEM_TYPE; +} diff --git a/target/linux/amazon/files/arch/mips/amazon/setup.c b/target/linux/amazon/files/arch/mips/amazon/setup.c new file mode 100644 index 0000000000..a96b565c69 --- /dev/null +++ b/target/linux/amazon/files/arch/mips/amazon/setup.c @@ -0,0 +1,186 @@ +/* + * Copyright (C) 2004 Peng Liu + * Copyright (C) 2007 John Crispin + * Copyright (C) 2007 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void prom_printf(const char * fmt, ...); +static void amazon_reboot_setup(void); + +/* the CPU clock rate - lifted from u-boot */ +unsigned int amazon_get_cpu_hz(void) +{ + /*-----------------------------------*/ + /**CGU CPU Clock Reduction Register***/ + /*-----------------------------------*/ + switch(amazon_readl(AMAZON_CGU_CPUCRD) & 0x3){ + case 0: + /*divider ration 1/1, 235 MHz clock */ + return 235000000; + case 1: + /*divider ration 2/3, 235 MHz clock, clock not accurate, here */ + return 150000000; + case 2: + /*divider ration 1/2, 235 MHz clock */ + return 117500000; + default: + /*divider ration 1/4, 235 MHz clock */ + return 58750000; + } +} + +/* the FPI clock rate - lifted from u-boot */ +unsigned int amazon_get_fpi_hz(void) +{ + unsigned int clkCPU; + clkCPU = amazon_get_cpu_hz(); + + /*-------------------------------------*/ + /***CGU Clock Divider Select Register***/ + /*-------------------------------------*/ + switch (amazon_readl(AMAZON_CGU_DIV) & 0x3) + { + case 1: + return clkCPU >> 1; + case 2: + return clkCPU >> 2; + default: + return clkCPU; + /* '11' is reserved */ + } +} + +/* this doesn't really belong here, but it's a convenient location */ +unsigned int amazon_get_cpu_ver(void) +{ + static unsigned int cpu_ver = 0; + if (cpu_ver == 0) + cpu_ver = amazon_readl(AMAZON_MCD_CHIPID) & 0xFFFFF000; + return cpu_ver; +} + +void amazon_time_init(void) +{ + mips_hpt_frequency = amazon_get_cpu_hz()/2; + printk("mips_hpt_frequency:%d\n", mips_hpt_frequency); +} + +extern int hr_time_resolution; + +/* ISR GPTU Timer 6 for high resolution timer */ +static void amazon_timer6_interrupt(int irq, void *dev_id) +{ + timer_interrupt(AMAZON_TIMER6_INT, NULL); +} + +static struct irqaction hrt_irqaction = { + .handler = amazon_timer6_interrupt, + .flags = SA_INTERRUPT, + .name = "hrt", +}; + +/* + * THe CPU counter for System timer, set to HZ + * GPTU Timer 6 for high resolution timer, set to hr_time_resolution + * Also misuse this routine to print out the CPU type and clock. + */ +void __init plat_timer_setup(struct irqaction *irq) +{ + /* cpu counter for timer interrupts */ + setup_irq(MIPS_CPU_TIMER_IRQ, irq); + + /* enable the timer in the PMU */ + amazon_writel(amazon_readl(AMAZON_PMU_PWDCR)| AMAZON_PMU_PWDCR_GPT|AMAZON_PMU_PWDCR_FPI, AMAZON_PMU_PWDCR); + + /* setup the GPTU for timer tick f_fpi == f_gptu*/ + amazon_writel(0x0100, AMAZON_GPTU_CLC); + amazon_writel(0xffff, AMAZON_GPTU_CAPREL); + amazon_writel(0x80C0, AMAZON_GPTU_T6CON); +} + +void __init plat_mem_setup(void) +{ + u32 chipid = 0; + u32 part_no = 0; + + chipid = amazon_readl(AMAZON_MCD_CHIPID); + part_no = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid); + + if(part_no == AMAZON_CHIPID_YANGTSE){ + prom_printf("Yangtse Version\n"); + } else if (part_no == AMAZON_CHIPID_STANDARD) { + prom_printf(SYSTEM_MODEL_NAME "\n"); + } else { + prom_printf("unknown version %8x\n",part_no); + } + + amazon_reboot_setup(); + board_time_init = amazon_time_init; + + //stop reset TPE and DFE + amazon_writel(0, AMAZON_RST_REQ); + //clock + amazon_writel(0x3fff, AMAZON_PMU_PWDCR); + //reenable trace capability + part_no = readl(AMAZON_BCU_ECON); +} + +static void amazon_machine_restart(char *command) +{ + local_irq_disable(); + amazon_writel(AMAZON_RST_ALL, AMAZON_RST_REQ); + for (;;) ; +} + +static void amazon_machine_halt(void) +{ + printk(KERN_NOTICE "System halted.\n"); + local_irq_disable(); + for (;;) ; +} + +static void amazon_machine_power_off(void) +{ + printk(KERN_NOTICE "Please turn off the power now.\n"); + local_irq_disable(); + for (;;) ; +} + +static void amazon_reboot_setup(void) +{ + _machine_restart = amazon_machine_restart; + _machine_halt = amazon_machine_halt; + pm_power_off = amazon_machine_power_off; +} diff --git a/target/linux/amazon/files/drivers/atm/amazon_tpe.c b/target/linux/amazon/files/drivers/atm/amazon_tpe.c new file mode 100644 index 0000000000..cf3e407329 --- /dev/null +++ b/target/linux/amazon/files/drivers/atm/amazon_tpe.c @@ -0,0 +1,3074 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +//----------------------------------------------------------------------- +/* + * Description: + * Driver for Infineon Amazon TPE + */ +//----------------------------------------------------------------------- +/* Author: peng.liu@infineon.com + * Created: 12-April-2004 + */ +//----------------------------------------------------------------------- +/* History + * Last changed on: 13 Oct. 2004 + * Last changed by: peng.liu@infineon.com + * Last changed on: 28 Jan. 2004 + * Last changed by: peng.liu@infineon.com + * Last changed Reason: + * - AAL5R may send more bytes than expected in MFL (so far, confirmed as 64 bytes) + */ +// 507261:tc.chen 2005/07/26 re-organize code address map to improve performance. +// 507281:tc.chen 2005/07/28 fix f4 segment isssue +/* 511045:linmars 2005/11/04 from Liu.Peng: change NRT_VBR bandwidth calculation based on scr instead of pcr */ + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif +#ifndef EXPORT_SYMTAB +#define EXPORT_SYMTAB +#endif + +/*TPE level loopback, bypass AWARE DFE */ +#undef TPE_LOOPBACK + +/* enable debug options */ +#undef AMAZON_ATM_DEBUG + +/* enable rx error packet analysis */ +#undef AMAZON_ATM_DEBUG_RX + +/* test AAL5 Interrupt */ +#undef AMAZON_TPE_TEST_AAL5_INT + +/* dump packet */ +#undef AMAZON_TPE_DUMP + +/* read ARC register*/ +/* this register is located in side DFE module*/ +#undef AMAZON_TPE_READ_ARC + +/* software controlled reassembly */ +#undef AMAZON_TPE_SCR + +/* recovery from AAL5 bug */ +#undef AMAZON_TPE_AAL5_RECOVERY + +#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) +#define ALPHAEUS_BASE_ADDR 0x31c00 +#define A_CFG_ADDR (ALPHAEUS_BASE_ADDR+0x04) +#define AR_CB0_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x2c) +#define AR_CB1_STATUS_ADDR (ALPHAEUS_BASE_ADDR+0x30) +#define AT_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x90) +#define AR_CELL0_ADDR (ALPHAEUS_BASE_ADDR+0x1a0) +#define AR_CD_CNT0_ADDR (ALPHAEUS_BASE_ADDR+0x1c8) +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) +#include +#include +#endif + +#define AMAZON_TPE_EMSG(fmt, args...) printk( KERN_ERR "%s: " fmt,__FUNCTION__, ## args) + +/***************************************** External Functions *******************************************/ +extern unsigned int amazon_get_fpi_hz(void); +extern void mask_and_ack_amazon_irq(unsigned int irq_nr); +extern void amz_push_oam(unsigned char *); + +//amazon_mei.c +#if defined(AMAZON_TPE_READ_ARC) || defined(AMAZON_TPE_AAL5_RECOVERY) +extern MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize); +extern MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize); +#endif + +/***************************************** Internal Functions *******************************************/ +int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data); +/***************************************** Global Data *******************************************/ +amazon_atm_dev_t g_atm_dev; //device data +static struct tq_struct swex_start_task; //BH task +static struct tq_struct swex_complete_task; //BH task +#ifdef AMAZON_TPE_SCR +static struct tq_struct a5r_task; //BH task +#endif +static struct dma_device_info g_dma_dev; //for DMA +static struct atm_dev * amazon_atm_devs[AMAZON_ATM_PORT_NUM]; +static struct oam_last_activity g_oam_time_stamp[AMAZON_ATM_MAX_VCC_NUM]; +static u8 g_oam_cell[AMAZON_AAL0_SDU+4]; //for OAM cells +#ifdef AMAZON_CHECK_LINK +static int adsl_link_status; //ADSL link status, 0:down, 1:up +#endif //AMAZON_CHECK_LINK +/***************************************** Module Parameters *************************************/ +// Parameter Definition for module +static int port_enable0 = 1; // Variable for parameter port_enable0 +static int port_enable1 = 0; // Variable for parameter port_enable1 +static int port_max_conn0 = 15; // Variable for parameter port_max_conn0 +static int port_max_conn1 = 0; // Variable for parameter port_max_conn1 +static int port_cell_rate_up0 = 7500; // Variable for parameter port_cell_rate_up0 +static int port_cell_rate_up1 = 7500; // Variable for parameter port_cell_rate_up1 + + +static int qsb_tau = 1; // Variable for parameter qsb_tau +static int qsb_srvm = 0xf; // Variable for parameter qsb_srvm +static int qsb_tstep = 4 ; // Variable for parameter qsb_tstep + +static int cbm_nrt = 3900; // Variable for parameter cbm_nrt +static int cbm_clp0 =3500; // Variable for parameter cbm_clp0 +static int cbm_clp1 =3200; // Variable for parameter cbm_clp1 +static int cbm_free_cell_no = AMAZON_ATM_FREE_CELLS; // Variable for parameter cbm_free_cell_no + +static int a5_fill_pattern = 0x7e; // Variable for parameter a5_fill_pattern '~' +static int a5s_mtu = 0x700; // mtu for tx +static int a5r_mtu = 0x700; // mtu for rx + +static int oam_q_threshold = 64; // oam queue threshold, minium value 64 +static int rx_q_threshold = 1000; // rx queue threshold, minium value 64 +static int tx_q_threshold = 800; // tx queue threshold, minium value 64 + +MODULE_PARM(port_max_conn0, "i"); +MODULE_PARM_DESC(port_max_conn0, "Maximum atm connection for port #0"); +MODULE_PARM(port_max_conn1, "i"); +MODULE_PARM_DESC(port_max_conn1, "Maximum atm connection for port #1"); +MODULE_PARM(port_enable0, "i"); +MODULE_PARM_DESC(port_enable0, "0 -> port disabled, 1->port enabled"); +MODULE_PARM(port_enable1, "i"); +MODULE_PARM_DESC(port_enable1, "0 -> port disabled, 1->port enabled"); +MODULE_PARM(port_cell_rate_up0, "i"); +MODULE_PARM_DESC(port_cell_rate_up0, "ATM port upstream rate in cells/s"); +MODULE_PARM(port_cell_rate_up1, "i"); +MODULE_PARM_DESC(port_cell_rate_up1, "ATM port upstream rate in cells/s"); + +MODULE_PARM(qsb_tau,"i"); +MODULE_PARM_DESC(qsb_tau, "Cell delay variation. value must be > 0"); +MODULE_PARM(qsb_srvm, "i"); +MODULE_PARM_DESC(qsb_srvm, "Maximum burst size"); +MODULE_PARM(qsb_tstep, "i"); +MODULE_PARM_DESC(qsb_tstep, "n*32 cycles per sbs cycles n=1,2,4"); + +MODULE_PARM(cbm_nrt, "i"); +MODULE_PARM_DESC(cbm_nrt, "Non real time threshold for cell buffer"); +MODULE_PARM(cbm_clp0, "i"); +MODULE_PARM_DESC(cbm_clp0, "Threshold for cells with cell loss priority 0"); +MODULE_PARM(cbm_clp1, "i"); +MODULE_PARM_DESC(cbm_clp1, "Threshold for cells with cell loss priority 1"); +MODULE_PARM(cbm_free_cell_no, "i"); +MODULE_PARM_DESC(cbm_free_cell_no, "Number of cells in the cell buffer manager"); + +MODULE_PARM(a5_fill_pattern, "i"); +MODULE_PARM_DESC(a5_fill_pattern, "filling pattern (PAD) for aal5 frames"); +MODULE_PARM(a5s_mtu, "i"); +MODULE_PARM_DESC(a5s_mtu, "max. SDU for upstream"); +MODULE_PARM(a5r_mtu, "i"); +MODULE_PARM_DESC(a5r_mtu, "max. SDU for downstream"); + +MODULE_PARM(oam_q_threshold, "i"); +MODULE_PARM_DESC(oam_q_threshold, "oam queue threshold"); + +MODULE_PARM(rx_q_threshold, "i"); +MODULE_PARM_DESC(rx_q_threshold, "downstream/rx queue threshold"); + +MODULE_PARM(tx_q_threshold, "i"); +MODULE_PARM_DESC(tx_q_threshold, "upstream/tx queue threshold"); + +/***************************************** local functions *************************************/ +/* Brief: valid QID + * Return: 1 if valid + * 0 if not + */ +static inline int valid_qid(int qid) +{ + return ( (qid>0) && (qiddata)) & 15) != 0){ + AMAZON_TPE_DMSG("need to adjust the alignment manually\n"); + skb_reserve(skb, 16 - (((u32) (skb->data)) & 15) ); + } + +} + +/* + * Brief: initialize the device according to the module paramters + * Return: not NULL - ok + * NULL - fails + * Description: arrange load parameters and call the hardware initialization routines + */ +static void atm_init_parameters(amazon_atm_dev_t *dev) +{ + //port setting + dev->ports[0].enable = port_enable0; + dev->ports[0].max_conn = port_max_conn0; + dev->ports[0].tx_max_cr = port_cell_rate_up0; + if (port_enable1){ + dev->ports[1].enable = port_enable1; + dev->ports[1].max_conn = port_max_conn1; + dev->ports[1].tx_max_cr = port_cell_rate_up1; + } + + //aal5 + dev->aal5.padding_byte = a5_fill_pattern; + dev->aal5.tx_max_sdu = a5s_mtu; + dev->aal5.rx_max_sdu = a5r_mtu; + + //cbm + dev->cbm.nrt_thr = cbm_nrt; + dev->cbm.clp0_thr = cbm_clp0; + dev->cbm.clp1_thr = cbm_clp1; + dev->cbm.free_cell_cnt = cbm_free_cell_no; + + //qsb + dev->qsb.tau = qsb_tau; + dev->qsb.tstepc =qsb_tstep; + dev->qsb.sbl = qsb_srvm; + + //allocate on the fly + dev->cbm.mem_addr = NULL; + dev->cbm.qd_addr = NULL; +} + + +/* Brief: Find QID for VCC + * Parameters: vcc - VCC data structure + * Return Value: -EINVAL - VCC not found + * qid - QID for this VCC + * Description: + * This function returns the QID of a given VCC + */ +static int amazon_atm_get_queue(struct atm_vcc* vcc) +{ + int i; + for (i=0;ivpi == vpi) && (vcc->vci == vci)) return i; + } + } + return -EINVAL; +} + +/* Brief: Find QID for VPI + * Parameters: vpi - VPI to found + * Return Value: -EINVAL - VPI not found + * qid - QID for this VPI + * + * Description: + * This function returns the QID for a given VPI. itf and VCI don't matter + */ +static int amazon_atm_find_vpi(u8 vpi) +{ + int i; + for (i=0;ivpi == vpi) return i; + } + } + return -EINVAL; +} + +/* + * Brief: Clears QID entries for VCC + * + * Parameters: vcc - VCC to found + * + * Description: + * This function searches for the given VCC and sets it to NULL if found. + */ +static inline void amazon_atm_clear_vcc(int i) +{ + g_atm_dev.queues[i].vcc = NULL; + g_atm_dev.queues[i].free = 1; +} + + +/* + * Brief: dump skb data + */ +static inline void dump_skb(u32 len, char * data) +{ +#ifdef AMAZON_TPE_DUMP + int i; + for(i=0;ipop != NULL) { + vcc->pop(vcc, skb); + } else { + dev_kfree_skb_any(skb); + } +} +/* + * Brief: release TX skbuff + */ +static inline void amazon_atm_free_tx_skb(struct sk_buff *skb) +{ + struct atm_vcc* vcc = ATM_SKB(skb)->vcc; + if (vcc!=NULL){ + amazon_atm_free_tx_skb_vcc(vcc,skb); + } else { + dev_kfree_skb_any(skb);//fchang:Added + } +} + +/* Brief: divide by 64 and round up + */ +static inline u32 divide_by_64_round_up(int input) +{ + u32 tmp1; + tmp1 = (u32) input; + tmp1 = (tmp1%64)?(tmp1/64 + 1): (tmp1/64); + if (tmp1 == 0) tmp1 = 1; + return tmp1; +} + +/* + * Brief: statistics + */ +#ifdef AMAZON_ATM_DEBUG +static inline void queue_statics(int qid, qs_t idx) +{ + if (valid_qid(qid)){ + g_atm_dev.queues[qid].qs[idx]++; + } +} +#else //not AMAZON_ATM_DEBUG +static inline void queue_statics(int qid, qs_t idx){} +#endif //AMAZON_ATM_DEBUG + + +/* Brief: set dma tx full, i.e. there is no available descriptors + */ +static void inline atm_dma_full(void) +{ + AMAZON_TPE_DMSG("ch0 is full\n"); + atomic_set(&g_atm_dev.dma_tx_free_0,0); +} + +/* + * Brief set dma tx free (at least one descript is available) + */ +inline static void atm_dma_free(void) +{ + AMAZON_TPE_DMSG("ch0 is free\n"); + atomic_set(&g_atm_dev.dma_tx_free_0,1); +} + + +/* Brief: return the status of DMA TX descriptors + * Parameters: TX channel (DMA_TX_CH0, TX_CH1) + * Return: + * 1: there are availabel TX descriptors + * 0: no available + * Description: + * + */ +inline int dma_may_send(int ch) +{ + if (atomic_read(&g_atm_dev.dma_tx_free_0)){ + return 1; + } + return 0; +} + +/******************************* global functions *********************************/ +/* + * Brief: SWIE Cell Extraction Start Routine + * and task routine for swex_complete_task + * Parameters: irq_stat - interrupt status + * + * Description: + * This is the routine for extracting cell. It will schedule itself if the hardware is busy. + * This routine runs in interrupt context + */ +void amazon_atm_swex(void * irq_stat) +{ + u32 ex_stat=0; + u32 addr; + // Read extraction status register + ex_stat = readl(CBM_HWEXSTAT0_ADDR); + + // Check if extraction/insertion is in progress + if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) || (test_and_set_bit(SWIE_LOCK, &(g_atm_dev.swie.lock))!=0)) { + AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); + swex_start_task.data = irq_stat; + queue_task(&swex_start_task, &tq_immediate); + mark_bh(IMMEDIATE_BH); + }else { + // Extract QID + g_atm_dev.swie.qid = (((u32)irq_stat) >> 24); + AMAZON_TPE_DMSG("extracting from qid=%u\n",g_atm_dev.swie.qid); + //read status word + addr = KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); + addr = readl((addr + g_atm_dev.swie.qid * 0x10 + 4) & 0xFFFFFFC0); + addr = KSEG1ADDR(addr); + g_atm_dev.swie.sw = readl(addr+52)&SWIE_ADDITION_DATA_MASK; + AMAZON_TPE_DMSG("cell addition word: %8x \n", g_atm_dev.swie.sw); + + // Start extraction + AMAZON_WRITE_REGISTER_L(g_atm_dev.swie.qid | SWIE_CBM_PID_SUBADDR, CBM_HWEXPAR0_ADDR); + AMAZON_WRITE_REGISTER_L(SWIE_CBM_SCE0, CBM_HWEXCMD_ADDR); + } +} +#ifdef AMAZON_TPE_SCR +u32 g_a5r_wait=0; +/* + * Brief: AAL5 Packet Extraction Routine and task routine for a5r_task + * Parameters: irq_stat - interrupt status + * + * Description: + * This is the routine for extracting frame. It will schedule itself if the hardware is busy. + * This routine runs in interrupt context + */ +void amazon_atm_a5r(void* qid) +{ + volatile u32 ex_stat=0; + u32 addr; + u32 a5r_wait=0; + + ex_stat = readl(CBM_HWEXSTAT0_ADDR); +#if 0 + // Check if extraction/insertion is in progress + if ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { + AMAZON_TPE_DMSG(" extraction in progress. Will wait\n"); + a5r_task.data = qid; + queue_task(&a5r_task, &tq_immediate); + mark_bh(IMMEDIATE_BH); + }else { + AMAZON_TPE_DMSG("extracting from qid=%u\n",(u8)qid); + // Start extraction + AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); + AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); + } +#else + //while ( (ex_stat & CBM_EXSTAT_SCB) || (ex_stat & CBM_EXSTAT_FB) ) { + while ( ex_stat != 0x80){ + a5r_wait++; + ex_stat = readl(CBM_HWEXSTAT0_ADDR); +#if 0 + if (a5r_wait >= 0xffffff){ + a5r_wait=0; + printk("."); + } +#endif + } + if (a5r_wait > g_a5r_wait){ + g_a5r_wait = a5r_wait; + } + AMAZON_WRITE_REGISTER_L(((u8)qid) | CBM_HWEXPAR_PN_A5, CBM_HWEXPAR0_ADDR); + AMAZON_WRITE_REGISTER_L(CBM_HWEXCMD_FE0, CBM_HWEXCMD_ADDR); +#endif +} + +#endif //AMAZON_TPE_SCR + +/* Brief: Handle F4/F5 OAM cell + * Return: + * 0 ok + * <0 fails + */ +static int inline amazon_handle_oam_cell(void *data, u8 vpi, u16 vci,u32 status) +{ + struct atm_vcc* vcc=NULL; + int qid; + if (!status&SWIE_EOAM_MASK){ + AMAZON_TPE_EMSG("unknown cell received, discarded\n"); + goto amazon_handle_oam_cell_err_exit; + }else if (status&SWIE_ECRC10ERROR_MASK){ + AMAZON_TPE_EMSG("CRC-10 Error Status:%8x, discarded\n", status); + goto amazon_handle_oam_cell_err_exit; + }else{ + if(status & (SWIE_EVCI3_MASK |SWIE_EVCI4_MASK)){ + //F4 level (VPI) OAM, Assume duplex + qid = amazon_atm_find_vpi(vpi)+CBM_RX_OFFSET; + }else if (status & (SWIE_EPTI4_MASK|SWIE_EPTI5_MASK)){ + //F5 level (VCI) OAM, Assume duplex + qid = amazon_atm_find_vpivci(vpi,vci)+CBM_RX_OFFSET; + }else{ + qid = -1; + AMAZON_TPE_EMSG("non-F4/F5 OAM cells?, discarded\n"); + goto amazon_handle_oam_cell_err_exit; + } + } + if (valid_qid(qid) && ((vcc = g_atm_dev.queues[qid].vcc)!=NULL)){ + //TODO, should we do this for ALL OAM types? (Actually only User and CC) + g_atm_dev.queues[qid].access_time=xtime; + if (vcc->push_oam){ + (*vcc->push_oam)(vcc,data); + }else{ + amz_push_oam(data); + } + }else{ + AMAZON_TPE_EMSG("no VCC yet\n"); + goto amazon_handle_oam_cell_err_exit; + } + return 0; +amazon_handle_oam_cell_err_exit: + dump_skb(AMAZON_AAL0_SDU,(char *)data); + return -1; +} + +/* Brief: SWIE Cell Extraction Finish Routine + * and task routine for swex_complete_task + * Description: + * 1.Allocate a buffer of type struct sk_buff + * 2.Copy the data from the temporary memory to this buffer + * 3.Push the data to upper layer + * 4.Update the statistical data if necessary + * 5.Release the temporary data + + */ +void amazon_atm_swex_push(void * data) +{ + struct atm_vcc* vcc=NULL; + struct sk_buff* skb=NULL; + struct amazon_atm_cell_header * cell_header; + u32 status; + int qid; + if (!data){ + AMAZON_TPE_EMSG("data is NULL\n"); + return; + } + qid = ((u8*)data)[AMAZON_AAL0_SDU]; + status = ((u32*)data)[ATM_AAL0_SDU/4]; + cell_header = (struct amazon_atm_cell_header *) data; + if (valid_qid(qid) != 1){ + AMAZON_TPE_EMSG("error qid: %u\n",qid); + AMAZON_TPE_EMSG("unknown cells recieved\n"); + }else if (qid == AMAZON_ATM_OAM_Q_ID){ + //OAM or RM or OTHER cell + //Find real connection + +#ifdef IKOS_MINI_BOOT + //for OAM loop back test + dump_skb(56,(char *)data); + //kfree(data); using g_oam_cell + return; +#endif //IKOS_MINI_BOOT +#ifdef TPE_LOOPBACK + amz_push_oam(data); + return; +#endif//TPE_LOOPBACK + int ret = 0; + ret = amazon_handle_oam_cell(data,cell_header->bit.vpi,cell_header->bit.vci,status); + if (ret == 0) + return; + }else{ + //should be normal AAL0 cells + // Get VCC + vcc = g_atm_dev.queues[qid].vcc; + if (vcc != NULL) { + AMAZON_TPE_DMSG("push to upper layer\n"); + skb = dev_alloc_skb(AMAZON_AAL0_SDU); + if (skb != NULL) { + //skb->dev=vcc->dev; + memcpy(skb_put(skb, AMAZON_AAL0_SDU), data, AMAZON_AAL0_SDU); + skb->stamp = xtime; + ATM_SKB(skb)->vcc = vcc; + (*g_atm_dev.queues[qid].push)(vcc,skb,0); + }else{ + AMAZON_TPE_EMSG(" No memory left for incoming AAL0 cell! Cell discarded!\n"); + //inform the upper layer + (*g_atm_dev.queues[qid].push)(vcc,skb,-ENOMEM); + atomic_inc(&vcc->stats->rx_drop); + } + }else{ + AMAZON_TPE_EMSG("invalid qid %u\n",qid); + } + } + //kfree(data); using g_oam_cell +} + +/* + * Brief: Interrupt handler for software cell extraction (done) + * Parameters: irq - CPPN for this interrupt + * data - Device ID for this interrupt + * regs - Register file + * + * Description: + * When a software extraction is finished this interrupt is issued. + * It reads the cell data and sends it to the ATM stack. + */ +void amazon_atm_swex_isr(int irq, void *data, struct pt_regs *regs) +{ + u32 * cell = NULL; + int i; + //ATM_AAL0 SDU + QID + AMAZON_TPE_DMSG("SWIE extraction done\n"); + cell = (u32 *) g_oam_cell; + if (cell != NULL){ + //convert to host byte order from big endian + for(i=0;i>CBM_INTINF0_QID_SHIFT); +#ifdef AMAZON_TPE_SCR + if (irq_stat & CBM_INTINF0_EF){ + amazon_atm_a5r((void*)qid); + } +#endif + // Check if Any Cell Arrived + if (irq_stat & CBM_INTINF0_ACA) { + amazon_atm_swex((void *)irq_stat); + } + //TX AAL5 PDU discard + if (irq_stat & CBM_INTINF0_OPF){ + if ( (qid) < CBM_RX_OFFSET ){ + g_atm_dev.mib_counter.tx_drop++; + } + queue_statics(qid, QS_HW_DROP); + } + if (irq_stat & (CBM_INTINF0_ERR|CBM_INTINF0_Q0E|CBM_INTINF0_Q0I|CBM_INTINF0_RDE)){ + AMAZON_TPE_EMSG("CBM INT status: %8x\n",irq_stat); + if (irq_stat & CBM_INTINF0_ERR){ + AMAZON_TPE_EMSG("CBM Error: FPI Bus Error\n"); + } + if (irq_stat & CBM_INTINF0_Q0E){ + AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); + } + if (irq_stat & CBM_INTINF0_Q0I){ + AMAZON_TPE_EMSG("CBM Error: Queue 0 Extract\n"); + } + if (irq_stat & CBM_INTINF0_RDE){ + AMAZON_TPE_EMSG("CBM Error: Read Empty Queue %u\n",qid); + dump_qd(qid); + } + } + } + mask_and_ack_amazon_irq(AMAZON_CBM_INT); +} + +/* Brief: check the status word after AAL SDU after reassembly + */ +static inline void check_aal5_error(u8 stw0, u8 stw1, int qid) +{ + if (stw0 & AAL5_STW0_MFL){ + AMAZON_TPE_DMSG("Maximum Frame Length\n"); + g_atm_dev.queues[qid].aal5VccOverSizedSDUs++; + } + if (stw0 & AAL5_STW0_CRC){ + AMAZON_TPE_DMSG("CRC\n"); + g_atm_dev.queues[qid].aal5VccCrcErrors++; + } +#ifdef AMAZON_ATM_DEBUG_RX + AMAZON_TPE_EMSG("qid:%u stw0:%8x stw1:%8x\n",qid,stw0,stw1); +#endif +} + +/* Brief: Process DMA rx data + * Parameters: + dma_dev: pointer to the dma_device_info, provided by us when register the dma device + * Return: no + * Description: DMA interrupt handerl with OoS support. It is called when there is some data in rx direction. + * + */ +//507261:tc.chen void atm_process_dma_rx(struct dma_device_info* dma_dev) +void __system atm_process_dma_rx(struct dma_device_info* dma_dev) +{ + u8 * head=NULL; + u32 length=0; + u8 stw0=0; + u8 stw1=0; + + struct sk_buff * skb=NULL; + struct atm_vcc * vcc=NULL; + int qid=0; +#ifdef AMAZON_ATM_DEBUG_RX + static int dma_rx_dump=0; + static u32 seq=0; + + seq++; + if (dma_rx_dump>0){ + printk("\n=========================[%u]=========================\n",seq); + } +#endif + length=dma_device_read(dma_dev,&head,(void**)&skb); + AMAZON_TPE_DMSG("receive %8p[%u] from DMA\n", head,length); + if (head == NULL||length<=0) { + AMAZON_TPE_DMSG("dma_read null \n"); + goto error_exit; + } + + if (length > (g_atm_dev.aal5.rx_max_sdu+64)){ + AMAZON_TPE_EMSG("received packet too large (%u)\n",length); + goto error_exit; + } + //check AAL5R trail for error and qid + //last byte is qid + length--; + qid = (int) head[length]; + AMAZON_TPE_DMSG("head[%u] qid %u\n",length, qid); + //STW0 is always 4 bytes before qid + length -= 4; + stw0 = head[length]&0xff; + AMAZON_TPE_DMSG("head[%u] stw0 %8x\n",length, stw0); + //position of STW1 depends on the BE bits + length = length-4 + (stw0&AAL5_STW0_BE); + stw1 = head[length]&0xff; + AMAZON_TPE_DMSG("head[%u] stw1 %8x\n",length, stw1); + if ( (stw0 & AAL5_STW0_MASK) || (stw1 & AAL5_STW1_MASK) ){ + //AAL5 Error + check_aal5_error(stw0, stw1,qid); + goto error_exit; + } + //make data pointers consistent + //UU + CPI + length -= 2; + AMAZON_TPE_DMSG("packet length %u\n", length); + + //error: cannot restore the qid + if (valid_qid(qid) != 1){ + AMAZON_TPE_EMSG("received frame in invalid qid %u!\n", qid); + goto error_exit; + } + vcc = g_atm_dev.queues[qid].vcc; + if (vcc == NULL){ + AMAZON_TPE_EMSG("received frame in invalid vcc, qid=%u!\n",qid); + goto error_exit; + } + if (skb == NULL){ + AMAZON_TPE_EMSG("cannot restore skb pointer!\n"); + goto error_exit; + } + skb_put(skb,length); + skb->stamp = xtime; + g_atm_dev.queues[qid].access_time=xtime; + if ((*g_atm_dev.queues[qid].push)(vcc,skb,0)){ + g_atm_dev.mib_counter.rx_drop++; + queue_statics(qid, QS_SW_DROP); + }else{ + g_atm_dev.mib_counter.rx++; + adsl_led_flash();//joelin adsl led + queue_statics(qid, QS_PKT); + AMAZON_TPE_DMSG("push successful!\n"); + } +#ifdef AMAZON_ATM_DEBUG_RX + if (dma_rx_dump>0){ + printk("\nOK packet [dump=%u] length=%u\n",dma_rx_dump,length); + dump_skb(length+7, head); + } + if (dma_rx_dump >0) dma_rx_dump--; +#endif + return ; +error_exit: +#ifdef AMAZON_ATM_DEBUG_RX + if ( (head!=NULL) && (length >0)){ + AMAZON_TPE_EMSG("length=%u\n",length); + dump_skb(length+5, head); + } + dma_rx_dump++; +#endif + g_atm_dev.mib_counter.rx_err++; + queue_statics(qid, QS_ERR); + /* + if (vcc){ + (*g_atm_dev.queues[qid].push)(vcc,skb,1); + } + */ + if (skb != NULL) { + dev_kfree_skb_any(skb); + } + return; +} + +/*Brief: ISR for DMA pseudo interrupt + *Parameter: + dma_dev: pointer to the dma_device_info, provided by us when register the dma device + intr_status: + RCV_INT: rx data available + TX_BUF_FULL_INT: tx descriptor run out of + TRANSMIT_CPT_INT: tx descriptor available again + *Return: + 0 for success??? + */ +//507261:tc.chen int amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) +int __system amazon_atm_dma_handler(struct dma_device_info* dma_dev, int intr_status) +{ + AMAZON_TPE_DMSG("status:%u\n",intr_status); + switch (intr_status) { + case RCV_INT: + atm_process_dma_rx(dma_dev); + break; + case TX_BUF_FULL_INT: + //TX full: no descriptors + atm_dma_full(); + break; + case TRANSMIT_CPT_INT: + //TX free: at least one descriptor + atm_dma_free(); + break; + default: + AMAZON_TPE_EMSG("unknown status!\n"); + } + return 0; +} + +/*Brief: free buffer for DMA tx + *Parameter: + dataptr: pointers to data buffer + opt: optional parameter, used to convey struct skb pointer, passwd in dma_device_write + *Return: + 0 for success??? + *Description: + called by DMA module to release data buffer after DMA tx transaction + *Error: + cannot restore skb pointer + */ +int amazon_atm_free_tx(u8*dataptr, void* opt) +{ + struct sk_buff *skb; + if (opt){ + AMAZON_TPE_DMSG("free skb%8p\n",opt); + skb = (struct sk_buff *)opt; + amazon_atm_free_tx_skb(skb); + }else{ + AMAZON_TPE_EMSG("BUG: cannot restore skb pointer!\n"); + } + return 0; +} + +/*Brief: allocate buffer & do alignment + */ +inline struct sk_buff * amazon_atm_alloc_buffer(int len) +{ + struct sk_buff *skb; + skb = dev_alloc_skb(len+16); + if (skb){ + //alignment requriements (4x32 bits (16 bytes) boundary) + alloc_align_16(skb); + } + return skb; +} + +/*Brief: allocate buffer for DMA rx + *Parameter: + len: length + opt: optional data to convey the skb pointer, which will be returned to me in interrupt handler, + *Return: + pointer to buffer, NULL means error? + *Description: + must make sure byte alignment + */ + +u8* amazon_atm_alloc_rx(int len, int* offset, void **opt) +{ + struct sk_buff *skb; + *offset = 0; + skb = amazon_atm_alloc_buffer(len); + if (skb){ + AMAZON_TPE_DMSG("alloc skb->data:%8p len:%u\n",skb->data,len); + *(struct sk_buff**)opt = skb; + }else{ + AMAZON_TPE_DMSG("no memory for receiving atm frame!\n"); + return NULL; + } + return skb->data; +} + + + + +/* Brief: Allocate kernel memory for sending a datagram. + * Parameters + * vcc virtual connection + * size data buffer size + * Return: + * NULL fail + * sk_buff a pointer to a sk_buff + * Description: + * This function can allocate our own additional memory for AAL5S inbound + * header (8bytes). We have to replace the protocol default one (alloc_tx in /net/atm/common.c) + * when we open the device. + * byte alignment is done is DMA driver. + */ +struct sk_buff *amazon_atm_alloc_tx(struct atm_vcc *vcc,unsigned int size) +{ + struct sk_buff *skb; + + if (!dma_may_send(DMA_TX_CH0)){ + AMAZON_TPE_EMSG("no DMA descriptor available!\n"); + return NULL; + } + //AAL5 inbound header space + alignment extra buffer + size+=8+AAL5S_INBOUND_HEADER; + + if (atomic_read(&vcc->tx_inuse) && !atm_may_send(vcc,size)) { + AMAZON_TPE_EMSG("Sorry tx_inuse = %u, size = %u, sndbuf = %u\n", + atomic_read(&vcc->tx_inuse),size,vcc->sk->sndbuf); + return NULL; + } + + skb = amazon_atm_alloc_buffer(size); + if (skb == NULL){ + AMAZON_TPE_EMSG("no memory\n"); + return NULL; + } + AMAZON_TPE_DMSG("dev_alloc_skb(%u) = %x\n", skb->len, (u32)skb); + AMAZON_TPE_DMSG("tx_inuse %u += %u\n",atomic_read(&vcc->tx_inuse),skb->truesize); + atomic_add(skb->truesize+ATM_PDU_OVHD,&vcc->tx_inuse); + + //reserve for AAL5 inbound header + skb_reserve(skb,AAL5S_INBOUND_HEADER); + return skb; +} + + +/* Brief: change per queue QSB setting according to vcc qos parameters + * Paramters: + * vcc: atm_vcc pointer + * qid: CBM queue id (1~15) + * Return: + */ +static inline void set_qsb(struct atm_vcc *vcc, struct atm_qos *qos, int qid) +{ + qsb_qptl_t qptl; + qsb_qvpt_t qvpt; + u32 tmp=0; + unsigned int qsb_clk; + + qsb_clk = amazon_get_fpi_hz()>>1; + + AMAZON_TPE_EMSG("Class=%u MAX_PCR=%u PCR=%u MIN_PCR=%u SCR=%u MBS=%u CDV=%u\n" + ,qos->txtp.traffic_class + ,qos->txtp.max_pcr + ,qos->txtp.pcr + ,qos->txtp.min_pcr + ,qos->txtp.scr + ,qos->txtp.mbs + ,qos->txtp.cdv + ); + + // PCR limiter + if (qos->txtp.max_pcr == 0){ + qptl.bit.tprs = 0; /* 0 disables the PCR limiter */ + }else { + // peak cell rate will be slightly lower than requested (maximum rate / pcr)= (qsbclock/2^3 * timestep/4)/pcr + tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.max_pcr ) + 1; + // check if an overfow occured + if (tmp > QSB_TP_TS_MAX) { + AMAZON_TPE_EMSG("max_pcr is too small, max_pcr:%u tprs:%u\n",qos->txtp.max_pcr, tmp); + qptl.bit.tprs = QSB_TP_TS_MAX; + }else{ + qptl.bit.tprs = tmp; + } + } + //WFQ + if (qos->txtp.traffic_class == ATM_CBR || qos->txtp.traffic_class ==ATM_VBR_RT){ + // real time queue gets weighted fair queueing bypass + qptl.bit.twfq = 0; + }else if (qos->txtp.traffic_class ==ATM_VBR_NRT ||qos->txtp.traffic_class ==ATM_UBR_PLUS ){ + // wfq calculation here are based on virtual cell rates, to reduce granularity for large rates + // wfq factor is maximum cell rate / garenteed cell rate. + //qptl.bit.twfq = g_atm_dev.qsb.min_cr * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; + if (qos->txtp.min_pcr == 0) { + AMAZON_TPE_EMSG(" MIN_PCR should not be zero\n"); + qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; + }else{ + tmp = QSB_GCR_MIN * QSB_WFQ_NONUBR_MAX / qos->txtp.min_pcr; + if (tmp == 0 ){ + qptl.bit.twfq = 1; + }else if (tmp > QSB_WFQ_NONUBR_MAX){ + AMAZON_TPE_EMSG("min_pcr is too small, min_pcr:%u twfq:%u\n",qos->txtp.min_pcr, tmp); + qptl.bit.twfq = QSB_WFQ_NONUBR_MAX; + }else{ + qptl.bit.twfq = tmp; + } + } + }else if (qos->txtp.traffic_class == ATM_UBR){ + // ubr bypass, twfq set to maximum value + qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; + }else{ + //tx is diabled, treated as UBR + AMAZON_TPE_EMSG(" unsupported traffic class %u \n", qos->txtp.traffic_class); + qos->txtp.traffic_class = ATM_UBR; + qptl.bit.twfq = QSB_WFQ_UBR_BYPASS; + } + + //SCR Leaky Bucket Shaper VBR.0/VBR.1 + if (qos->txtp.traffic_class ==ATM_VBR_RT || qos->txtp.traffic_class ==ATM_VBR_NRT){ + if (qos->txtp.scr == 0){ + //SCR == 0 disable the shaper + qvpt.bit.ts = 0; + qvpt.bit.taus = 0; + }else{ + //CLP + if (vcc->atm_options&ATM_ATMOPT_CLP){ + //CLP1 + qptl.bit.vbr = 1; + }else{ + //CLP0 + qptl.bit.vbr = 0; + } + //TS and TauS + tmp = (( (qsb_clk * g_atm_dev.qsb.tstepc)>>5)/ qos->txtp.scr ) + 1; + if (tmp > QSB_TP_TS_MAX) { + AMAZON_TPE_EMSG("scr is too small, scr:%u ts:%u\n",qos->txtp.scr, tmp); + qvpt.bit.ts = QSB_TP_TS_MAX; + }else{ + qvpt.bit.ts = tmp; + } + tmp = (qos->txtp.mbs - 1)*(qvpt.bit.ts - qptl.bit.tprs)/64; + if (tmp > QSB_TAUS_MAX){ + AMAZON_TPE_EMSG("mbs is too large, mbr:%u taus:%u\n",qos->txtp.mbs, tmp); + qvpt.bit.taus = QSB_TAUS_MAX; + }else if (tmp == 0){ + qvpt.bit.taus = 1; + }else{ + qvpt.bit.taus = tmp; + } + } + }else{ + qvpt.w0 = 0; + } + //write the QSB Queue Parameter Table (QPT) + AMAZON_WRITE_REGISTER_L(QSB_QPT_SET_MASK,QSB_RTM_ADDR); + AMAZON_WRITE_REGISTER_L(qptl.w0, QSB_RTD_ADDR); + AMAZON_WRITE_REGISTER_L((QSB_TABLESEL_QPT<itf; + u32 dma_qos=0; + u8 * qd_addr=NULL; + + tx_config|=CBM_QD_W3_WM_EN|CBM_QD_W3_CLPt; + //RT: check if the connection is a real time connection + if (vcc->qos.txtp.traffic_class == ATM_CBR || vcc->qos.txtp.traffic_class == ATM_VBR_RT){ + tx_config|= CBM_QD_W3_RT; + }else{ + tx_config|= CBM_QD_W3_AAL5; //don't set the AAL5 flag if it is a RT service + } + rx_config = tx_config; + + if(vcc->qos.aal == ATM_AAL5){ + //QoS: DMA QoS according to the traffic class + switch (vcc->qos.txtp.traffic_class){ + case ATM_CBR: dma_qos = CBR_DMA_QOS;break; + case ATM_VBR_RT: dma_qos = VBR_RT_DMA_QOS;break; + case ATM_VBR_NRT: dma_qos = VBR_NRT_DMA_QOS;break; + case ATM_UBR_PLUS: dma_qos = UBR_PLUS_DMA_QOS;break; + case ATM_UBR: dma_qos = UBR_DMA_QOS;break; + } + + //TX: upstream, AAL5(EPD or PPD), NOINT, SBid + tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); + //RX: DMA QoS, downstream, no interrupt, AAL5(EPD, PPD), NO INT, HCR +#ifdef AMAZON_TPE_SCR + rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_EOF; +#else + rx_config |= dma_qos|CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_NOINT|CBM_QD_W3_HCR; +#endif + }else { + //should be AAL0 + //upstream, NOINT, SBid + tx_config |= CBM_QD_W3_DIR_UP|CBM_QD_W3_INT_NOINT|(itf&CBM_QD_W3_SBID_MASK); + //RX: downstream, ACA interrupt, + rx_config |= CBM_QD_W3_DIR_DOWN|CBM_QD_W3_INT_ACA; + } + + //Threshold: maximum threshold for tx/rx queue, which is adjustable in steps of 64 cells + tx_config |= ( (divide_by_64_round_up(tx_q_threshold)&0xffff)< 1024) + { + AMAZON_TPE_EMSG("timeout\n"); + return -EIO; + } + // write address register, + AMAZON_WRITE_REGISTER_L(idx, HTU_RAMADDR_ADDR); + // configure transmit queue + tmp1 = vpi<<24|vci<<8; + tmp1|= HTU_RAMDAT1_VCON // valid connection the entry is not validated here !!!!!!!!!!!!!!!! + |HTU_RAMDAT1_VCI3 // vci3 -> oam queue + |HTU_RAMDAT1_VCI4 // vci4 -> oam queue + |HTU_RAMDAT1_VCI6 // vci6 -> rm queue + |HTU_RAMDAT1_PTI4 // pti4 -> oam queue + |HTU_RAMDAT1_PTI5; // pti5 -> oam queue + + // ramdat 1 (in params & oam handling) + AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT1_ADDR); + // ramdat 2 (out params & oam handling) + tmp1 = ((qid+CBM_RX_OFFSET)&HTU_RAMDAT2_QID_MASK) + |HTU_RAMDAT2_PTI6 + |HTU_RAMDAT2_PTI7 + |HTU_RAMDAT2_F4U + |HTU_RAMDAT2_F5U + ; + AMAZON_WRITE_REGISTER_L( tmp1, HTU_RAMDAT2_ADDR); + wmb(); + // write HTU entry + AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR, HTU_RAMCMD_ADDR); + return 0; +} +/* + * Brief: add HTU table entry + * Parameter: + * vcc: atm_vcc pointer + * qid: CBM queue id + * Return: + * 0: sucessful + * EIO: HTU table entry cannot be written + */ +inline static int set_htu(struct atm_vcc *vcc, u32 qid) +{ + return set_htu_entry(vcc->vpi, vcc->vci, qid, (qid - CBM_DEFAULT_Q_OFFSET)); +} + +/* + * Brief: allocate a queue + * Return: + * <=0 no available queues + * >0 qid + */ +static int atm_allocate_q(short itf) +{ + int i; + u32 tmp1=0; + int qid=0; + amazon_atm_port_t * dev; + dev = &g_atm_dev.ports[itf]; + //find start queue id for this interface + for (i=0; i< itf; i++) + { + qid+= g_atm_dev.ports[i].max_conn; + } + // apply default queue offset ( oam, free cell queue, others, rm ) + qid += CBM_DEFAULT_Q_OFFSET; + tmp1 = qid; + // search for a free queue + while ( (qidmax_conn) + && ( g_atm_dev.queues[qid].free != 1)) { + qid++;; + } + // if none was found, send failure message and return + if ( tmp1+dev->max_conn == qid) + { + return -EFAULT; + } + return qid; + +} +/* Brief: open a aal5 or aal0 connection + */ +static int atm_open(struct atm_vcc *vcc, push_back_t push) +{ + int err=0; + int qid=0; + amazon_atm_port_t * port = & g_atm_dev.ports[vcc->itf]; + unsigned long flags; + /***************** check bandwidth ******************/ + /* 511045:linmars change ATM_VBR_NRT to use scr instead of pcr */ + if ((vcc->qos.txtp.traffic_class==ATM_CBR&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) + ||(vcc->qos.txtp.traffic_class==ATM_VBR_RT&&vcc->qos.txtp.max_pcr>port->tx_rem_cr) + ||(vcc->qos.txtp.traffic_class==ATM_VBR_NRT&&vcc->qos.txtp.scr>port->tx_rem_cr) + ||(vcc->qos.txtp.traffic_class==ATM_UBR_PLUS&&vcc->qos.txtp.min_pcr>port->tx_rem_cr) + ) { + AMAZON_TPE_EMSG("not enough bandwidth left (%u) cells per seconds \n",port->tx_rem_cr); + return -EINVAL; + } + if ( (qid = amazon_atm_find_vpivci(vcc->vpi, vcc->vci)) >0 ){ + AMAZON_TPE_EMSG("vpi:%u vci:%u is alreay open on queue:%u\n", vcc->vpi, vcc->vci, qid); + return -EADDRINUSE; + } + + /***************** allocate entry queueID for this port *****************/ + if ( (qid=atm_allocate_q(vcc->itf)) <= 0){ + AMAZON_TPE_EMSG("port: %u max:%u qid: %u\n", vcc->itf, port->max_conn, qid); + AMAZON_TPE_EMSG("no availabel connections for this port:%u\n",vcc->itf); + return -EINVAL; + } + /**************QSB parameters and CBM descriptors*************/ + set_qsb(vcc, &vcc->qos, qid); + set_qd(vcc, qid); + mb(); + err=set_htu(vcc,qid); + if (err){ + AMAZON_TPE_EMSG("set htu entry fails %u\n",err); + return err; + } + /************set internal mapping*************/ + local_irq_save(flags); + g_atm_dev.queues[qid].free = 0; + g_atm_dev.queues[qid].vcc = vcc; + g_atm_dev.queues[qid].push = push; + g_atm_dev.queues[qid+CBM_RX_OFFSET].free = 0; + g_atm_dev.queues[qid+CBM_RX_OFFSET].vcc = vcc; + g_atm_dev.queues[qid+CBM_RX_OFFSET].push = push; + /******************reserve bandwidth**********************/ + if (vcc->qos.txtp.traffic_class == ATM_CBR){ + //CBR, real time connection, reserve PCR + port->tx_cur_cr += vcc->qos.txtp.max_pcr; + port->tx_rem_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ + //VBR_RT, real time connection, reserve PCR + port->tx_cur_cr += vcc->qos.txtp.max_pcr; + port->tx_rem_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ + //VBR_NRT, reserve SCR + port->tx_cur_cr += vcc->qos.txtp.pcr; + port->tx_rem_cr -= vcc->qos.txtp.pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ + //UBR_PLUS, reserve MCR + port->tx_cur_cr += vcc->qos.txtp.min_pcr; + port->tx_rem_cr -= vcc->qos.txtp.min_pcr; + } + local_irq_restore(flags); + return err; +} +/* Brief: Open ATM connection + * Parameters: atm_vcc - Pointer to VCC data structure + * vpi - VPI value for new connection + * vci - VCI value for new connection + * + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - No bandwidth/queue/ or unsupported AAL type + * Description: + * This function opens an ATM connection on a specific device/interface + * + */ +int amazon_atm_open(struct atm_vcc *vcc,push_back_t push) +{ + int err=0; + + AMAZON_TPE_DMSG("vpi %u vci %u itf %u aal %u\n" + ,vcc->vpi + ,vcc->vci + ,vcc->itf + ,vcc->qos.aal + ); + + AMAZON_TPE_DMSG("tx cl %u bw %u mtu %u\n" + ,vcc->qos.txtp.traffic_class + ,vcc->qos.txtp.max_pcr + ,vcc->qos.txtp.max_sdu + ); + AMAZON_TPE_DMSG("rx cl %u bw %u mtu %u\n" + ,vcc->qos.rxtp.traffic_class + ,vcc->qos.rxtp.max_pcr + ,vcc->qos.rxtp.max_sdu + ); + if (vcc->qos.aal == ATM_AAL5 || vcc->qos.aal == ATM_AAL0){ + err = atm_open(vcc,push); + }else{ + AMAZON_TPE_EMSG("unsupported aal type %u\n", vcc->qos.aal); + err = -EPROTONOSUPPORT; + }; + if (err == 0 ){ + //replace the default memory allocation function with our own + vcc->alloc_tx = amazon_atm_alloc_tx; + set_bit(ATM_VF_READY,&vcc->flags); + } + return err; +} + +/* Brief: Send ATM OAM cell + * Parameters: atm_vcc - Pointer to VCC data structure + * skb - Pointer to sk_buff structure, that contains the data + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - Not supported + * Description: + * This function sends a cell over and ATM connection + * We always release the skb + * TODO: flags handling (ATM_OF_IMMED, ATM_OF_INRATE) + */ +int amazon_atm_send_oam(struct atm_vcc *vcc, void * cell, int flags) +{ + int err=0; + int qid=0; + struct amazon_atm_cell_header * cell_header; + // Get cell header + cell_header = (struct amazon_atm_cell_header*) cell; + if ((cell_header->bit.pti == ATM_PTI_SEGF5) || (cell_header->bit.pti == ATM_PTI_E2EF5)) { + qid = amazon_atm_find_vpivci( cell_header->bit.vpi, cell_header->bit.vci); + }else if (cell_header->bit.vci == 0x3 || cell_header->bit.vci == 0x4) { + //507281:tc.chen qid = amazon_atm_find_vpi((int) cell_header->bit.vpi); + // 507281:tc.chen start + u8 f4_vpi; + f4_vpi = cell_header->bit.vpi; + qid = amazon_atm_find_vpi(f4_vpi ); + // 507281:tc.chen end + }else{ + //non-OAM cells, always invalid + qid = -EINVAL; + } + if (qid == -EINVAL) { + err = -EINVAL; + AMAZON_TPE_EMSG("not valid AAL0 packet\n"); + }else{ + //send the cell using swie +#ifdef TPE_LOOPBACK + err = amazon_atm_swin(AMAZON_ATM_OAM_Q_ID, cell); +#else + err = amazon_atm_swin(qid, cell); +#endif + } + //kfree(cell); + return err; +} + +/* Brief: Send AAL5 frame through DMA + * Parameters: vpi - virtual path id + * vci - virtual circuit id + * clp - cell loss priority + * qid - CBM queue to be sent to + * skb - packet to be sent + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - Not supported + * Description: + * This function sends a AAL5 frame over and ATM connection + * 1. make sure that the data is aligned to 4x32-bit boundary + * 2. provide the inbound data (CPCS-UU and CPI, not used here) + * 3. set CLPn + * 4. send the frame by DMA + * 5. release the buffer ??? + ** use our own allocation alloc_tx + ** we make sure the alignment and additional memory + *** we always release the skb + + */ +int amazon_atm_dma_tx(u8 vpi, u16 vci, u8 clp, u8 qid, struct sk_buff *skb) +{ + int err=0,need_pop=1; + u32 * data=NULL; + int nwrite=0; + struct sk_buff *skb_tmp; + u32 len=skb->len; + + //AAL5S inbound header 8 bytes + if (skb->len > g_atm_dev.aal5.tx_max_sdu - AAL5S_INBOUND_HEADER) { + AMAZON_TPE_DMSG("tx_max_sdu:%u\n",g_atm_dev.aal5.tx_max_sdu); + AMAZON_TPE_DMSG("skb too large [%u]!\n",skb->len); + err = -EMSGSIZE; + goto atm_dma_tx_error_exit; + } + + //Check the byte alignment requirement and header space + if ( ( ((u32)(skb->data)%16) !=AAL5S_INBOUND_HEADER)|| (skb_headroom(skb)len+16); + if (skb_tmp==NULL){ + err = - ENOMEM; + goto atm_dma_tx_error_exit; + } + alloc_align_16(skb_tmp); + g_atm_dev.aal5.cnt_cpy++; + skb_reserve(skb_tmp,AAL5S_INBOUND_HEADER); + memcpy(skb_put(skb_tmp,skb->len), skb->data, skb->len); + amazon_atm_free_tx_skb(skb); + need_pop=0; + skb = skb_tmp; + } + //Provide AAL5S inbound header + data = (u32 *)skb_push(skb,8); + data[0] = __be32_to_cpu(vpi<<20|vci<<4|clp); + data[1] = __be32_to_cpu(g_atm_dev.aal5.padding_byte<<8|qid); + + len = skb->len; + + //send through DMA + AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[0]); + AMAZON_TPE_DMSG("AAL5S header 0 %8x\n", data[1]); + AMAZON_TPE_DMSG("about to call dma_write len: %u\n", len); + nwrite=dma_device_write( &g_dma_dev,skb->data,len,skb); + if (nwrite != len) { + //DMA descriptors full +// AMAZON_TPE_EMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); + AMAZON_TPE_DMSG("AAL5 packet drop due to DMA nwrite:%u skb->len:%u\n", nwrite,len); + err = -EAGAIN; + goto atm_dma_tx_drop_exit; + } + AMAZON_TPE_DMSG("just finish call dma_write\n"); + //release in the "dma done" call-back + return 0; +atm_dma_tx_error_exit: + g_atm_dev.mib_counter.tx_err++; + queue_statics(qid, QS_ERR); + goto atm_dma_tx_exit; + +atm_dma_tx_drop_exit: + g_atm_dev.mib_counter.tx_drop++; + queue_statics(qid, QS_SW_DROP); +atm_dma_tx_exit: + if (need_pop){ + amazon_atm_free_tx_skb(skb); + }else{ + dev_kfree_skb_any(skb); + } + return err; +} + +/* Brief: Send AAL0/AAL5 packet + * Parameters: atm_vcc - Pointer to VCC data structure + * skb - Pointer to sk_buff structure, that contains the data + * Return: 0 - sucessful + * -ENOMEM - No memory available + * -EINVAL - Not supported + * Description: + * See amazon_atm_dma_tx + */ +int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb) +{ + int qid=0; + u8 clp=0; + int err=0; + u32 wm=0; + + if (vcc == NULL || skb == NULL){ + AMAZON_TPE_EMSG("invalid parameter\n"); + return -EINVAL; + } + ATM_SKB(skb)->vcc = vcc; + qid = amazon_atm_get_queue(vcc); + if (valid_qid(qid) != 1) { + AMAZON_TPE_EMSG("invalid vcc!\n"); + err = -EINVAL; + goto atm_send_err_exit; + } + + //Send AAL0 using SWIN + if (vcc->qos.aal == ATM_AAL0){ +#ifdef TPE_LOOPBACK + err=amazon_atm_swin((qid+CBM_RX_OFFSET), skb->data); +#else + err=amazon_atm_swin(qid, skb->data); +#endif + if (err){ + goto atm_send_err_exit; + } + goto atm_send_exit; + } + + //Should be AAl5 + //MIB counter + g_atm_dev.mib_counter.tx++; + adsl_led_flash();//joelin adsl led + queue_statics(qid, QS_PKT); + +#ifdef AMAZON_CHECK_LINK + //check adsl link + if (adsl_link_status == 0){ + //link down + AMAZON_TPE_DMSG("ADSL link down, discarded!\n"); + err=-EFAULT; + goto atm_send_drop_exit; + } +#endif + clp = (vcc->atm_options&ATM_ATMOPT_CLP)?1:0; + //check watermark first + wm = readl(CBM_WMSTAT0_ADDR); + if ( (wm & (1<qos.txtp.traffic_class != ATM_CBR + &&vcc->qos.txtp.traffic_class != ATM_VBR_RT) + &(wm & (CBM_WM_NRT_MASK | (clp&CBM_WM_CLP1_MASK)) ))){ + //wm hit: discard + AMAZON_TPE_DMSG("watermark hit, discarded!\n"); + err=-EFAULT; + goto atm_send_drop_exit; + } +#ifdef TPE_LOOPBACK + return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, (qid+CBM_RX_OFFSET),skb); +#else + return amazon_atm_dma_tx(vcc->vpi, vcc->vci,clp, qid,skb); +#endif + +atm_send_exit: + amazon_atm_free_tx_skb_vcc(vcc,skb); + return 0; + +atm_send_drop_exit: + g_atm_dev.mib_counter.tx_drop++; + queue_statics(qid,QS_SW_DROP); +atm_send_err_exit: + amazon_atm_free_tx_skb_vcc(vcc,skb); + return err; +} + +/* Brief: Return ATM port related MIB + * Parameter: interface number + atm_cell_ifEntry_t + */ +int amazon_atm_cell_mib(atm_cell_ifEntry_t* to,u32 itf) +{ + g_atm_dev.mib_counter.htu_unp += readl(HTU_MIBCIUP); + to->ifInUnknownProtos = g_atm_dev.mib_counter.htu_unp; +#ifdef AMAZON_TPE_READ_ARC + u32 reg_val=0; + meiDebugRead((AR_CELL0_ADDR+itf*4),®_val,1); + g_atm_dev.mib_counter.rx_cells += reg_val; + reg_val=0; + meiDebugWrite((AR_CELL0_ADDR+itf*4),®_val,1); + to->ifHCInOctets_h = (g_atm_dev.mib_counter.rx_cells * 53)>>32; + to->ifHCInOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; + + meiDebugRead((AT_CELL0_ADDR+itf*4),®_val,1); + g_atm_dev.mib_counter.tx_cells += reg_val; + reg_val=0; + meiDebugWrite((AT_CELL0_ADDR+itf*4),®_val,1); + to->ifHCOutOctets_h = (g_atm_dev.mib_counter.tx_cells * 53)>>32; + to->ifHCOutOctets_l = (g_atm_dev.mib_counter.rx_cells * 53) & 0xffff; + + meiDebugRead((AR_CD_CNT0_ADDR+itf*4),®_val,1); + g_atm_dev.mib_counter.rx_err_cells += reg_val; + reg_val=0; + meiDebugWrite((AR_CD_CNT0_ADDR+itf*4),®_val,1); + to->ifInErrors = g_atm_dev.mib_counter.rx_err_cells; + + to->ifOutErrors = 0; +#else + to->ifHCInOctets_h = 0; + to->ifHCInOctets_l = 0; + to->ifHCOutOctets_h = 0; + to->ifHCOutOctets_l = 0; + to->ifInErrors = 0; + to->ifOutErrors = 0; +#endif + return 0; +} + +/* Brief: Return ATM AAL5 related MIB + * Parameter: + atm_aal5_ifEntry_t + */ +int amazon_atm_aal5_mib(atm_aal5_ifEntry_t* to) +{ + u32 reg_l,reg_h; + //AAL5R received Octets from ATM + reg_l = readl(AAL5_RIOL_ADDR); + reg_h = readl(AAL5_RIOM_ADDR); + g_atm_dev.mib_counter.rx_cnt_h +=reg_h; + if (reg_l + g_atm_dev.mib_counter.rx_cnt_l < reg_l){ + g_atm_dev.mib_counter.rx_cnt_h++; + } + + g_atm_dev.mib_counter.rx_cnt_l+= reg_l; + //AAL5S sent Octets to ATM + reg_l = readl(AAL5_SOOL_ADDR); + reg_h = readl(AAL5_SOOM_ADDR); + g_atm_dev.mib_counter.tx_cnt_h +=reg_h; + if (reg_l + g_atm_dev.mib_counter.tx_cnt_l < reg_l){ + g_atm_dev.mib_counter.tx_cnt_h++; + } + g_atm_dev.mib_counter.tx_cnt_l+= reg_l; + + + g_atm_dev.mib_counter.tx_ppd += readl(CBM_AAL5ODIS_ADDR); + g_atm_dev.mib_counter.rx_drop += readl(CBM_AAL5IDIS_ADDR); + + //store + to->ifHCInOctets_h = g_atm_dev.mib_counter.rx_cnt_h; + to->ifHCInOctets_l = g_atm_dev.mib_counter.rx_cnt_l; + to->ifHCOutOctets_h = g_atm_dev.mib_counter.tx_cnt_h; + to->ifHCOutOctets_l = g_atm_dev.mib_counter.tx_cnt_l; + to->ifOutDiscards = g_atm_dev.mib_counter.tx_drop; + to->ifInDiscards = g_atm_dev.mib_counter.rx_drop; + + //Software provided counters + //packets passed to higher layer + to->ifInUcastPkts = g_atm_dev.mib_counter.rx; + //packets passed from higher layer + to->ifOutUcastPkts = g_atm_dev.mib_counter.tx; + //number of wrong downstream packets + to->ifInErrors = g_atm_dev.mib_counter.rx_err; + //number of wrong upstream packets + to->ifOutErros = g_atm_dev.mib_counter.tx_err; + + return 0; +} +/* Brief: Return ATM AAL5 VCC related MIB from internale use + * Parameter: + * qid + * atm_aal5_vcc_t + */ +static int __amazon_atm_vcc_mib(int qid, atm_aal5_vcc_t* to) +{ + //aal5VccCrcErrors + to->aal5VccCrcErrors = g_atm_dev.queues[qid].aal5VccCrcErrors; + to->aal5VccOverSizedSDUs =g_atm_dev.queues[qid].aal5VccOverSizedSDUs; + to->aal5VccSarTimeOuts = 0; //not supported yet + return 0; +} +/* Brief: Return ATM AAL5 VCC related MIB from vpi/vci + * Parameter: atm_vcc + * atm_aal5_vcc_t + */ +int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to) +{ + int qid=0; + int err=0; + qid = amazon_atm_find_vpivci(vpi, vci); + if (qid >0 ){ + err = __amazon_atm_vcc_mib(qid,to); + }else{ + return -EINVAL; + } + return err; +} + + +/* Brief: Return ATM AAL5 VCC related MIB + * Parameter: atm_vcc + * atm_aal5_vcc_t + */ +int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t* to) +{ + int qid=0; + int err=0; + qid = amazon_atm_get_queue(vcc); + if (qid >0 ){ + err = __amazon_atm_vcc_mib(qid,to); + }else{ + return -EINVAL; + } + return err; +} + +/* Brief: Close ATM connection + * Parameters: atm_vcc - Pointer to VCC data structure + * Return: no + * Description: + * This function closes the given ATM connection + */ +void amazon_atm_close(struct atm_vcc *vcc){ + int i; + int qid=0; + u32 tmp1; + u8 * qd_addr; + unsigned long flags; + if (vcc == NULL){ + AMAZON_TPE_EMSG("invalid parameter. vcc is null\n"); + return; + } + u32 itf = (u32) vcc->itf; + //release bandwidth + if (vcc->qos.txtp.traffic_class == ATM_CBR){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_RT){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.max_pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.max_pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_VBR_NRT){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.pcr; + }else if (vcc->qos.txtp.traffic_class == ATM_UBR_PLUS){ + g_atm_dev.ports[itf].tx_rem_cr += vcc->qos.txtp.min_pcr; + g_atm_dev.ports[itf].tx_cur_cr -= vcc->qos.txtp.min_pcr; + } + + qid = amazon_atm_get_queue(vcc); + if (qid == -EINVAL){ + AMAZON_TPE_EMSG("unknown vcc %u.%u.%u\n", vcc->itf, vcc->vpi, vcc->vci); + return; + } + local_irq_save(flags); + //Disable HTU entry + i=0; + while ((tmp1 = readl(HTU_RAMSTAT_ADDR))!=0 && i < HTU_RAM_ACCESS_MAX) i++; + if (i == HTU_RAM_ACCESS_MAX){ + AMAZON_TPE_EMSG("HTU RAM ACCESS out of time\n"); + } + + // write address register + AMAZON_WRITE_REGISTER_L(qid - CBM_DEFAULT_Q_OFFSET, HTU_RAMADDR_ADDR); + // invalidate the connection + AMAZON_WRITE_REGISTER_L(0, HTU_RAMDAT1_ADDR); + // write command + AMAZON_WRITE_REGISTER_L(HTU_RAMCMD_WR,HTU_RAMCMD_ADDR); + + qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); +#ifdef AMAZON_ATM_DEBUG + tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x8) & 0xffff; + AMAZON_TPE_DMSG("TX queue has %u cells \n", tmp1); + tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x08)&0xffff; + AMAZON_TPE_DMSG("RX queue has %u cells \n", tmp1); +#endif + // set threshold of txqueue to 0 + tmp1 = readl(qd_addr+qid*CBM_QD_SIZE+0x0c); + tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); + AMAZON_WRITE_REGISTER_L(tmp1, (qd_addr+qid*CBM_QD_SIZE+0x0c)); + // set threshold of rxqueue to 0 + tmp1 = readl( qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c); + tmp1&= (~ CBM_QD_W3_THRESHOLD_MASK); + AMAZON_WRITE_REGISTER_L(tmp1,(qd_addr+(qid+CBM_RX_OFFSET)*CBM_QD_SIZE+0x0c)); + + //clear internal mapping + amazon_atm_clear_vcc(qid); + amazon_atm_clear_vcc(qid+CBM_RX_OFFSET); + + local_irq_restore(flags); +} + + +/* Brief: initialize internal data structure + */ +static void atm_constructor(amazon_atm_dev_t * dev) +{ + int i; + memset(dev,0,sizeof(amazon_atm_dev_t)); + atm_init_parameters(dev); + //internal: queue "free" flag + for(i=1;iqueues[i].vcc=NULL; + dev->queues[i].free = 1; + } + for(i=0;iports[i].tx_rem_cr = dev->ports[i].tx_max_cr; + } + //MIB + atomic_set(&dev->dma_tx_free_0,1); //initially there should be free descriptors +} + +/* Brief: return round up base-2 logarithm + */ +static inline int get_log_2(u32 value) +{ + int i=0,j=1; + while (i<11){ + if (j>=value) break; + j=j<<1; + i++; + } + AMAZON_TPE_DMSG("round up base-2 logarithm of %u is %u\n", value, i); + return i; +} + +/* Brief: TPE hardware initialization + * Parameter: specifiy the configurations of the hardware + */ +static inline int atm_init_hard(amazon_atm_dev_t * dev) +{ + int i; + u32 tmp1, tmp2, tmp3; + u8 * mem_addr=NULL; + u8 * qd_addr=NULL; + //PMU power on the module 1st + *(AMAZON_PMU_PWDCR) = (*AMAZON_PMU_PWDCR) | (AMAZON_PMU_PWDCR_TPE); + //Reset the module + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_TPE); + mb(); + mdelay(100); + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~(AMAZON_RST_REQ_TPE)); + mb(); + + unsigned long qsb_clk = amazon_get_fpi_hz()>>1; + /*********allocate & arrange memory for CBM *********/ + if (dev->cbm.mem_addr == NULL){ + dev->cbm.allocated = 1; + mem_addr = (u8 *)__get_free_pages(GFP_KERNEL, get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); + if (mem_addr != NULL){ + dev->cbm.mem_addr = mem_addr; + } else { + goto init_no_mem; + } + } + if (dev->cbm.qd_addr == NULL){ +#ifdef CONFIG_USE_VENUS + //to work around a bug, bit15 of QDOFF address should be 1,Aug4, 2004 + //thus, we allocate 64k memory + qd_addr = (u8 *)__get_free_pages(GFP_KERNEL, 4); + if (qd_addr != NULL) { + dev->cbm.qd_addr_free = (u8*) (((unsigned long) qd_addr)); + dev->cbm.qd_addr = (u8*) (((unsigned long) qd_addr) | 0x8000); + }else{ + goto init_no_mem; + } +#else //CONFIG_USE_VENUS + qd_addr = (u8 *)kmalloc( CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM, GFP_KERNEL); + if (qd_addr != NULL) { + dev->cbm.qd_addr = qd_addr; + }else { + goto init_no_mem; + } +#endif //CONFIG_USE_VENUS + } +//#ifndef CONFIG_MIPS_UNCACHED + mem_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.mem_addr); + qd_addr = (u8 *)KSEG1ADDR((unsigned long)dev->cbm.qd_addr); +//#endif + //CBM reset cell queue memory, 64 bytes / cell + memset_io(mem_addr, 0, CBM_CELL_SIZE * dev->cbm.free_cell_cnt); + //make a link list, last 4 bytes is pointer + for(i=1;icbm.free_cell_cnt;i++){ + AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * i)),(mem_addr + CBM_CELL_SIZE * (i-1) + 0x3c)); + } + //reset queue descriptor + memset_io(qd_addr, 0, CBM_QD_SIZE * AMAZON_ATM_MAX_QUEUE_NUM); + //init word 0-2 of q0 (free cell list) + //address of last cell + AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr + CBM_CELL_SIZE * (dev->cbm.free_cell_cnt-1))), qd_addr); + //address of first cell + AMAZON_WRITE_REGISTER_L(CPHYSADDR((mem_addr)), (qd_addr + 4)); + //no. of free cells + AMAZON_WRITE_REGISTER_L(dev->cbm.free_cell_cnt,(qd_addr + 8)); + //init q descriptor for OAM receiving + AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (divide_by_64_round_up(oam_q_threshold)&0xff)<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); +// AMAZON_WRITE_REGISTER_L((CBM_QD_W3_INT_ACA | (u32)oam_q_threshold<< CBM_QD_W3_THRESHOLD_SHIFT), (qd_addr + AMAZON_ATM_OAM_Q_ID * CBM_QD_SIZE + 0x0c)); + //config CBM + //set offset address and threshold + AMAZON_WRITE_REGISTER_L(CPHYSADDR(qd_addr), CBM_QDOFF_ADDR); + AMAZON_WRITE_REGISTER_L(((dev->cbm.nrt_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_NRTTHR_ADDR); + AMAZON_WRITE_REGISTER_L(((dev->cbm.clp0_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP0THR_ADDR); + AMAZON_WRITE_REGISTER_L(((dev->cbm.clp1_thr&CBM_THR_MASK)|CBM_WM_3_1), CBM_CLP1THR_ADDR); + //config interrupts + AMAZON_WRITE_REGISTER_L( CBM_IMR_MASK & (~(CBM_IMR_ACA|CBM_IMR_Q0E|CBM_IMR_Q0I|CBM_IMR_RDE|CBM_IMR_OPF|CBM_IMR_ERR +#ifdef AMAZON_ATM_DEBUG + |CBM_IMR_DISC|CBM_IMR_QFD|CBM_IMR_NFCA|CBM_IMR_CLP1TR|CBM_IMR_CLP0TR|CBM_IMR_NRTTR|CBM_IMR_QTR +#endif +#ifdef AMAZON_TPE_SCR + |CBM_IMR_EF +#endif + )), CBM_IMR0_ADDR); + AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS | SRC_SRE_ENABLE | AMAZON_CBM_INT, CBM_SRC0_ADDR); + + //HTU + //RAM entry for number of possible connections per interface + tmp1 = dev->ports[0].max_conn?dev->ports[0].max_conn-1:0; + AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR); + for(i=1;iports[i].max_conn; + AMAZON_WRITE_REGISTER_L(tmp1, HTU_RX0_ADDR + 4 * i); + } + dev->cbm.max_q_off = tmp1+1; + //Queue ID for OAM/RM/Other cells + AMAZON_WRITE_REGISTER_L (AMAZON_ATM_OAM_Q_ID, HTU_DESTOAM_ADDR); + AMAZON_WRITE_REGISTER_L( AMAZON_ATM_RM_Q_ID, HTU_DESTRM_ADDR); + AMAZON_WRITE_REGISTER_L( AMAZON_ATM_OTHER_Q_ID, HTU_DESTOTHER_ADDR); + //Timeout + AMAZON_WRITE_REGISTER_L((u32) HTUTIMEOUT, HTU_TIMEOUT_ADDR); +#ifdef AMAZON_ATM_DEBUG + AMAZON_WRITE_REGISTER_L((u32) HTU_ISR_MASK + &(~(HTU_ISR_NE|HTU_ISR_TORD|HTU_ISR_OTOC|HTU_ISR_ONEC|HTU_ISR_PNE|HTU_ISR_PT)), HTU_IMR0_ADDR); + AMAZON_WRITE_REGISTER_L(SRC_CLRR|SRC_TOS_MIPS|SRC_SRE_ENABLE|AMAZON_HTU_INT,HTU_SRC0_ADDR); +#endif + //QSB + //global setting, TstepC, SBL, Tau + //Tau + AMAZON_WRITE_REGISTER_L(dev->qsb.tau, QSB_TAU_ADDR); + //SBL + AMAZON_WRITE_REGISTER_L(dev->qsb.sbl, QSB_SBL_ADDR); + //tstep + AMAZON_WRITE_REGISTER_L(dev->qsb.tstepc>>1, QSB_CONFIG_ADDR); + + //port settting + for(i=0;iports[i].enable) && (dev->ports[i].tx_max_cr!=0) ){ + tmp1 = ((qsb_clk * dev->qsb.tstepc) >>1) / dev->ports[i].tx_max_cr; + tmp2 = tmp1 / 64; //integer value of Tsb + tmp3 = tmp1%64 + 1; //fractional part of Tsb + //carry over to integer part (?) + if (tmp3 == 64) { + tmp3 = 0; + tmp2++; + } + if (tmp2 == 0){ + tmp2 = 1; + tmp3 = 1; + } + //1. set mask 2. write value to data transfer register 3. start the transfer + //SCT(FracRate) + AMAZON_WRITE_REGISTER_L(QSB_SET_SCT_MASK, QSB_RTM_ADDR); + AMAZON_WRITE_REGISTER_L(tmp3,QSB_RTD_ADDR); + AMAZON_WRITE_REGISTER_L(((QSB_TABLESEL_SCT<aal5.tx_max_sdu,AAL5_SMFL_ADDR); + AMAZON_WRITE_REGISTER_L(dev->aal5.rx_max_sdu,AAL5_RMFL_ADDR); + AMAZON_WRITE_REGISTER_L(AAL5_SCMD_MODE_POLL // enable polling mode + |AAL5_SCMD_SS + |AAL5_SCMD_AR + ,AAL5_SCMD_ADDR); + //start CBM + AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); + wmb(); + return 0; +init_no_mem: + if (mem_addr != NULL) free_pages((unsigned long)mem_addr,get_log_2(((CBM_CELL_SIZE * dev->cbm.free_cell_cnt) >>PAGE_SHIFT) + 1)); + +#ifdef CONFIG_USE_VENUS + //to work around a bug, bit15 of QDOFF address should be 1 + if (qd_addr != NULL) free_pages((unsigned long)qd_addr,4); +#else //CONFIG_USE_VENUS + if (qd_addr != NULL) kfree(qd_addr); +#endif //CONFIG_USE_VENUS + return -ENOMEM; +} + +/* + * Brief: Create entry in /proc for status information + */ +void atm_create_proc(void) +{ + create_proc_read_entry("amazon_atm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_ATM); + create_proc_read_entry("amazon_atm_mib", 0,NULL, amazon_atm_read_procmem,(void*)PROC_MIB); + create_proc_read_entry("amazon_atm_vcc", 0,NULL, amazon_atm_read_procmem,(void*)PROC_VCC); +#if 0 + create_proc_read_entry("amazon_atm_aal5", 0,NULL, amazon_atm_read_procmem,(void*)PROC_AAL5); + create_proc_read_entry("amazon_atm_cbm", 0,NULL, amazon_atm_read_procmem,(void*)PROC_CBM); + create_proc_read_entry("amazon_atm_htu", 0,NULL, amazon_atm_read_procmem,(void*)PROC_HTU); + create_proc_read_entry("amazon_atm_qsb", 0,NULL, amazon_atm_read_procmem,(void*)PROC_QSB); + create_proc_read_entry("amazon_atm_swie", 0,NULL, amazon_atm_read_procmem,(void*)PROC_SWIE); +#endif +} + +/* + * Brief: Delete entry in /proc for status information + */ +void atm_delete_proc(void) +{ + remove_proc_entry("amazon_atm", NULL); + remove_proc_entry("amazon_atm_mib", NULL); + remove_proc_entry("amazon_atm_vcc", NULL); +#if 0 + remove_proc_entry("amazon_atm_aal5", NULL); + remove_proc_entry("amazon_atm_cbm", NULL); + remove_proc_entry("amazon_atm_htu", NULL); + remove_proc_entry("amazon_atm_qsb", NULL); + remove_proc_entry("amazon_atm_swie", NULL); +#endif +} +/* Brief: Initialize ATM module + * Parameters: no + * Return: &g_atm_dev - sucessful + * NULL - fails: + * 1. invalid parameter + * 2. No memory available + * Description: + * This function configure the TPE components according to the input info, + * -CBM + * -HTU + * -QSB + * -AAL5 + * + */ +amazon_atm_dev_t * amazon_atm_create(void) +{ + int i; + AMAZON_TPE_DMSG("atm_init\n"); + /************initialize global data structure****************/ + atm_constructor(&g_atm_dev); + /***********allocate kernel resources****************/ + //bottom halfs for SWEX + swex_start_task.routine = amazon_atm_swex; + swex_start_task.data = NULL; + swex_complete_task.routine = amazon_atm_swex_push; + swex_complete_task.data = NULL; +#ifdef AMAZON_TPE_SCR + a5r_task.routine = amazon_atm_a5r; + a5r_task.data = NULL; +#endif //AMAZON_TPE_SCR + //SWIN semaphore + sema_init(&(g_atm_dev.swie.in_sem), 1); + //SWIE lock + clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); + //SWIE wait queue + init_waitqueue_head(&(g_atm_dev.swie.sleep)); + atm_create_proc(); + + //register DMA + memset(&g_dma_dev,0,sizeof(struct dma_device_info)); + strcpy(g_dma_dev.device_name,"TPE"); + g_dma_dev.weight=1; + g_dma_dev.num_tx_chan=2; + g_dma_dev.num_rx_chan=2; + g_dma_dev.ack=1; + g_dma_dev.tx_burst_len=4; + g_dma_dev.rx_burst_len=4; + //DMA TX + + for(i=0;i<1;i++){ + g_dma_dev.tx_chan[i].weight=QOS_DEFAULT_WGT; + g_dma_dev.tx_chan[i].desc_num=10; + g_dma_dev.tx_chan[i].packet_size=g_atm_dev.aal5.tx_max_sdu + AAL5S_INBOUND_HEADER; + g_dma_dev.tx_chan[i].control=1; + } + //DMA RX + for(i=0;i<2;i++){ + g_dma_dev.rx_chan[i].weight=QOS_DEFAULT_WGT; + /* BingTao's suggestion, change from 5->10 will prevent packet loss in NO_TX_INT mode */ + g_dma_dev.rx_chan[i].desc_num=10; + g_dma_dev.rx_chan[i].packet_size=(g_atm_dev.aal5.rx_max_sdu + AAL5R_TRAILER_LEN+0x10f)&(~0xf); + g_dma_dev.rx_chan[i].control=1; + } + g_dma_dev.intr_handler=amazon_atm_dma_handler; + g_dma_dev.buffer_alloc=amazon_atm_alloc_rx; + g_dma_dev.buffer_free=amazon_atm_free_tx; + dma_device_register(&g_dma_dev); +/***********intialize the atm hardware ****************/ + if ( atm_init_hard(&g_atm_dev) != 0){ + return NULL; + } + //start CBM + AMAZON_WRITE_REGISTER_L(CBM_CFG_START,CBM_CFG_ADDR); + wmb(); + + //Start HTU + AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); + wmb(); + + + // Register interrupts for insertion and extraction + request_irq(AMAZON_SWIE_INT, amazon_atm_swie_isr, SA_INTERRUPT, "tpe_swie", NULL); + request_irq(AMAZON_CBM_INT, amazon_atm_cbm_isr, SA_INTERRUPT, "tpe_cbm", NULL); +#ifdef AMAZON_ATM_DEBUG + request_irq(AMAZON_HTU_INT , amazon_atm_htu_isr, SA_INTERRUPT, "tpe_htu", NULL); +#endif +#ifdef AMAZON_TPE_TEST_AAL5_INT + request_irq(AMAZON_AAL5_INT, amazon_atm_aal5_isr, SA_INTERRUPT, "tpe_aal5", NULL); +#endif + return &g_atm_dev; +} + +/* Brief: clean up atm + * Parameters: no + * Return: no + * Description: + * Disable the device. + */ +void amazon_atm_cleanup(void){ + int i; + clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); + wake_up(&g_atm_dev.swie.sleep); + up(&g_atm_dev.swie.in_sem); + // diable SWIE interrupts + AMAZON_WRITE_REGISTER_L(0, SWIE_ISRC_ADDR); + AMAZON_WRITE_REGISTER_L(0, SWIE_ESRC_ADDR); + wmb(); + + // Disable schedulers ( including interrupts )----------------------- + for (i = 0; i < AMAZON_ATM_PORT_NUM; i++); + { + AMAZON_WRITE_REGISTER_L(QSB_SET_SPT_SBVALID_MASK, QSB_RTM_ADDR); + AMAZON_WRITE_REGISTER_L( 0 ,QSB_RTD_ADDR); + AMAZON_WRITE_REGISTER_L( (QSB_TABLESEL_SPT<>PAGE_SHIFT)+1)); +#ifdef CONFIG_USE_VENUS + //to work around a bug, bit15 of QDOFF address should be 1 + free_pages((unsigned long)g_atm_dev.cbm.qd_addr_free,4); +#else //CONFIG_USE_VENUS + kfree(g_atm_dev.cbm.qd_addr); +#endif //CONFIG_USE_VENUS + } + atm_delete_proc(); + // free interrupts for insertion and extraction + dma_device_unregister(&g_dma_dev); + free_irq(AMAZON_SWIE_INT, NULL); + free_irq(AMAZON_CBM_INT, NULL); +#ifdef AMAZON_ATM_DEBUG + free_irq(AMAZON_HTU_INT, NULL); +#endif +#ifdef AMAZON_TPE_TEST_AAL5_INT + free_irq(AMAZON_AAL5_INT, NULL); +#endif + +} + +/************************ ATM network interface ***********************************************/ +/* Brief: getsockopt + */ +int amazon_atm_getsockopt(struct atm_vcc *vcc, int level, int optname, char *optval, int optlen) +{ + int err=0; + atm_aal5_vcc_t mib_vcc; + AMAZON_TPE_DMSG("1\n"); + switch (optname){ + case SO_AMAZON_ATM_MIB_VCC: + AMAZON_TPE_DMSG("2\n"); + err = amazon_atm_vcc_mib(vcc, &mib_vcc); + AMAZON_TPE_DMSG("%u\n",mib_vcc.aal5VccCrcErrors); + err = copy_to_user((void *)optval,&mib_vcc, sizeof(mib_vcc)); + AMAZON_TPE_DMSG("err %u\n",err); + break; + default: + return -EFAULT; + } + return err; +} + +/* Brief: IOCTL + */ + +int amazon_atm_ioctl(struct atm_dev *dev,unsigned int cmd,void *arg) +{ + int err=0; + //MIB + atm_cell_ifEntry_t mib_cell; + atm_aal5_ifEntry_t mib_aal5; + atm_aal5_vcc_x_t mib_vcc; + if (_IOC_TYPE(cmd) != AMAZON_ATM_IOC_MAGIC) return -ENOTTY; + if (_IOC_NR(cmd) > AMAZON_ATM_IOC_MAXNR) return -ENOTTY; + + if (_IOC_DIR(cmd) & _IOC_READ) + err = !access_ok(VERIFY_WRITE, (void *)arg, _IOC_SIZE(cmd)); + else if (_IOC_DIR(cmd) & _IOC_WRITE) + err = !access_ok(VERIFY_READ, (void *)arg, _IOC_SIZE(cmd)); + if (err) { + AMAZON_TPE_EMSG("acess verification fails \n"); + return -EFAULT; + } + switch(cmd) { + case AMAZON_ATM_MIB_CELL: + err = amazon_atm_cell_mib(&mib_cell,(u32)arg); + if (err==0){ + err = __copy_to_user((void *)arg,&mib_cell,sizeof(mib_cell)); + }else{ + AMAZON_TPE_EMSG("cannot get MIB ATM_CELL\n"); + } + break; + case AMAZON_ATM_MIB_AAL5: + err = amazon_atm_aal5_mib(&mib_aal5); + if (err==0){ + err=__copy_to_user(arg, &mib_aal5, sizeof(mib_aal5)); + }else{ + AMAZON_TPE_EMSG("cannot get MIB ATM_AAL5\n"); + } + break; + case AMAZON_ATM_MIB_VCC: + err=__copy_from_user(&mib_vcc,arg, sizeof(mib_vcc)); + AMAZON_TPE_DMSG("return of copy_from_user %x\n",err); + err = amazon_atm_vcc_mib_x(mib_vcc.vpi, mib_vcc.vci, &(mib_vcc.mib_vcc)); + if (err==0){ + err=__copy_to_user(arg, &mib_vcc, sizeof(mib_vcc)); + }else{ + AMAZON_TPE_EMSG("cannot get MIB ATM_VCC\n"); + } + + default: + return -ENOTTY; + } + return err; +} +/* Brief: return a link list of OAM related time stamp info + * Parameter: none + * Return: + a link list of "struct oam_last_activity" data + * Description: + Each time, a F4/F5 cell or AAL5 packet is received, the time stamp is updated. + Through this call, u get a list of this time stamp for all active connection. + Please note that u have read-only access. + */ +const struct oam_last_activity* get_oam_time_stamp() +{ + int i,j; + for(i=CBM_DEFAULT_Q_OFFSET+CBM_RX_OFFSET,j=0;ivpi; + g_oam_time_stamp[j].vci = g_atm_dev.queues[i].vcc->vci; + g_oam_time_stamp[j].stamp = g_atm_dev.queues[i].access_time; + g_oam_time_stamp[j].next = NULL; + j++; + } + } + if (j==0) { + return NULL; + }else{ + return g_oam_time_stamp; + } +} + + +/* Brief: call back routine for rx + * Parameter: + * vcc atm_vcc pointer + * skb data if no error + err error flag, 0: no error, 1:error + * Return: + * 0 + * <>0 cannot push up + * Description: + * release the packet if cannot push up + */ +static int amazon_atm_net_push(struct atm_vcc *vcc,struct sk_buff *skb, int err) +{ + if (err){ + if (vcc && vcc->stats) { + atomic_inc(&vcc->stats->rx_err); + } + }else{ + ATM_SKB(skb)->vcc = vcc; + + if (!atm_charge(vcc, skb->truesize)){ + //no space this vcc + AMAZON_TPE_EMSG("no space for this vcc\n"); + dev_kfree_skb_any(skb); + return -ENOMEM; + } + atomic_inc(&vcc->stats->rx); + AMAZON_TPE_DMSG("push to vcc\n"); + vcc->push(vcc,skb); + } + return 0; +} +int amazon_atm_net_send_oam(struct atm_vcc*vcc, void *cell, int flags) +{ + return amazon_atm_send_oam(vcc,cell,flags); +} + +int amazon_atm_net_send(struct atm_vcc *vcc,struct sk_buff *skb) +{ + int err=0; + if (vcc->qos.aal == ATM_AAL0 || vcc->qos.aal == ATM_AAL5) { + err=amazon_atm_send(vcc,skb); + }else{ + //not supported + err = -EPROTONOSUPPORT; + } + if (err){ + atomic_inc(&vcc->stats->tx_err); + }else{ + atomic_inc(&vcc->stats->tx); + } + AMAZON_TPE_DMSG("sent, tx_inuse:%u\n", atomic_read(&vcc->tx_inuse)); + return err; +} + +int amazon_atm_net_open(struct atm_vcc *vcc,short vpi, int vci) +{ + vcc->itf = (int) vcc->dev->dev_data; + vcc->vpi = vpi; + vcc->vci = vci; + return(amazon_atm_open(vcc,amazon_atm_net_push)); +} + +static int amazon_atm_change_qos(struct atm_vcc *vcc, struct atm_qos *qos, int flgs) +{ + int qid; + + if (vcc == NULL || qos == NULL){ + AMAZON_TPE_EMSG("invalid parameters\n"); + return -EINVAL; + } + qid = amazon_atm_get_queue(vcc); + if (valid_qid(qid) != 1) { + AMAZON_TPE_EMSG("no vcc connection opened\n"); + return -EINVAL; + } + set_qsb(vcc,qos,qid); + return 0; +} + +static struct atmdev_ops amazon_atm_ops = { + open: amazon_atm_net_open, + close: amazon_atm_close, + ioctl: amazon_atm_ioctl, + send: amazon_atm_net_send, + send_oam: amazon_atm_net_send_oam, +// getsockopt: amazon_atm_getsockopt, + change_qos: amazon_atm_change_qos, +// proc_read: amazon_atm_proc_read, + owner: THIS_MODULE, +}; // ATM device callback functions + +/* + * brief "/proc" function + */ +int amazon_atm_read_procmem(char *buf, char **start, off_t offset,int count, int *eof, void *data) +{ + int buf_off=0; /* for buf */ + int i=0,j=0; + int type= (u32)data;//which module + atm_aal5_ifEntry_t mib_aal5; + atm_cell_ifEntry_t mib_cell; + atm_aal5_vcc_t mib_vcc; + switch(type){ + case PROC_MIB: + //MIB counter + amazon_atm_aal5_mib(&mib_aal5); + //TX: + buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Upstream =========\n"); + buf_off+=sprintf(buf+buf_off,"received %u (pkts) from upper layer\n", mib_aal5.ifOutUcastPkts); + buf_off+=sprintf(buf+buf_off,"errors: %u (pkts)\n",mib_aal5.ifOutErros); + buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n", mib_aal5.ifOutDiscards); + buf_off+=sprintf(buf+buf_off,"transmitted: %x-%x (bytes) \n", + mib_aal5.ifHCOutOctets_h, mib_aal5.ifHCOutOctets_l); + //RX: + buf_off+=sprintf(buf+buf_off,"\n============= AAL5 Downstream =========\n"); + buf_off+=sprintf(buf+buf_off,"received %x-%x (bytes)\n", + mib_aal5.ifHCInOctets_h,mib_aal5.ifHCInOctets_l); + buf_off+=sprintf(buf+buf_off,"discards: %u (ptks)\n",mib_aal5.ifInDiscards); + buf_off+=sprintf(buf+buf_off,"errors: %u (ptks)\n",mib_aal5.ifInErrors); + buf_off+=sprintf(buf+buf_off,"passed %u (ptks) to upper layer\n",mib_aal5.ifInUcastPkts); + + //Cell level + buf_off+=sprintf(buf+buf_off,"\n============= ATM Cell =========\n"); + amazon_atm_cell_mib(&mib_cell,0); +#ifdef AMAZON_TPE_READ_ARC + buf_off+=sprintf(buf+buf_off,"Port 0: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 0: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 0: downstream errors: %u (cells)\n",mib_cell.ifInErrors); + amazon_atm_cell_mib(&mib_cell,1); + buf_off+=sprintf(buf+buf_off,"Port 1: downstream received: %x-%x (bytes)\n",mib_cell.ifHCInOctets_h,mib_cell.ifHCInOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 1: upstream transmitted: %x-%x (bytes)\n",mib_cell.ifHCOutOctets_h,mib_cell.ifHCOutOctets_l); + buf_off+=sprintf(buf+buf_off,"Port 1: downstream errors: %u (cells)\n",mib_cell.ifInErrors); +#endif + buf_off+=sprintf(buf+buf_off,"HTU discards: %u (cells)\n",mib_cell.ifInUnknownProtos); + + buf_off+=sprintf(buf+buf_off,"\n====== Specials =====\n"); + buf_off+=sprintf(buf+buf_off,"AAL5S PPD: %u (cells)\n",g_atm_dev.mib_counter.tx_ppd); +#ifdef AMAZON_TPE_SCR + buf_off+=sprintf(buf+buf_off,"Reassembly wait: %u \n",g_a5r_wait); +#endif + break; + case PROC_ATM: + //Interface (Port) + buf_off+=sprintf(buf+buf_off,"[Interfaces]\n"); + for(i=0;ivpi + ,g_atm_dev.queues[i].vcc->vci + ,g_atm_dev.queues[i].vcc->itf + ,i + ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_sec + ,(u32)g_atm_dev.queues[i+CBM_RX_OFFSET].access_time.tv_usec + ); + buf_off+=sprintf(buf+buf_off,"\tqos_tx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" + ,g_atm_dev.queues[i].vcc->qos.txtp.traffic_class + ,g_atm_dev.queues[i].vcc->qos.txtp.max_pcr + ,g_atm_dev.queues[i].vcc->qos.txtp.pcr + ,g_atm_dev.queues[i].vcc->qos.txtp.min_pcr + ,g_atm_dev.queues[i].vcc->qos.txtp.scr + ,g_atm_dev.queues[i].vcc->qos.txtp.mbs + ,g_atm_dev.queues[i].vcc->qos.txtp.cdv + ); + buf_off+=sprintf(buf+buf_off,"\tqos_rx class=%u max_pcr=%u pcr=%u min_pcr=%u scr=%u mbs=%u cdv=%u\n" + ,g_atm_dev.queues[i].vcc->qos.rxtp.traffic_class + ,g_atm_dev.queues[i].vcc->qos.rxtp.max_pcr + ,g_atm_dev.queues[i].vcc->qos.rxtp.pcr + ,g_atm_dev.queues[i].vcc->qos.rxtp.min_pcr + ,g_atm_dev.queues[i].vcc->qos.rxtp.scr + ,g_atm_dev.queues[i].vcc->qos.rxtp.mbs + ,g_atm_dev.queues[i].vcc->qos.rxtp.cdv + ); + __amazon_atm_vcc_mib((i+CBM_RX_OFFSET),&mib_vcc); + buf_off+=sprintf(buf+buf_off,"\tCRC error=%u\n", mib_vcc.aal5VccCrcErrors); + buf_off+=sprintf(buf+buf_off,"\toversized packet=%u\n", mib_vcc.aal5VccOverSizedSDUs); +#ifdef AMAZON_ATM_DEBUG + if ( valid_qid(i+CBM_RX_OFFSET)){ + buf_off+=sprintf(buf+buf_off,"\tdownstream statics\n" ); + buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_PKT]); + buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_ERR] ); + buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i+CBM_RX_OFFSET].qs[QS_SW_DROP] ); + } + + buf_off+=sprintf(buf+buf_off,"\tupstream statics\n" ); + buf_off+=sprintf(buf+buf_off,"\t\tpackets=%u\n",g_atm_dev.queues[i].qs[QS_PKT]); + buf_off+=sprintf(buf+buf_off,"\t\terr_packets=%u\n",g_atm_dev.queues[i].qs[QS_ERR] ); + buf_off+=sprintf(buf+buf_off,"\t\thw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_HW_DROP] ); + buf_off+=sprintf(buf+buf_off,"\t\tsw_dropped=%u\n",g_atm_dev.queues[i].qs[QS_SW_DROP] ); + +#endif + + } + + } + break; + default: + break; + } + if(buf_off>0) *eof = 1; + return buf_off; +} + +#ifdef AMAZON_TPE_AAL5_RECOVERY +extern int (*tpe_reset)(void); +extern int (*tpe_start)(void); +extern int (*tpe_inject)(void); +/* Brief: Reset TPE hardware + * Description + * This is a wordaround for AAL5 bug. It tries to reset TPE. + * take care of software + * setup all previous connection + */ +int amazon_tpe_reset(void) +{ + struct atm_vcc * vcc; + int err=0; + int i; + u8 * qd_addr; + u32 reg_l, reg_h; + unsigned int a_cfg_value=0; + unsigned int a_cfg_old_value=0; + atm_aal5_ifEntry_t mib_aal5; + atm_cell_ifEntry_t mib_cell; + + //make sure all cells transmitting out first + //Segmentation done + amazon_atm_aal5_mib(&mib_aal5); + reg_l = g_atm_dev.mib_counter.tx_cnt_l; + reg_h = g_atm_dev.mib_counter.tx_cnt_h; + while(1){ + mdelay(10); + amazon_atm_aal5_mib(&mib_aal5); + if( (reg_l == g_atm_dev.mib_counter.tx_cnt_l) && (reg_h == g_atm_dev.mib_counter.tx_cnt_h) ){ + break; + } + AMAZON_TPE_DMSG("AAL5 Segmentation still in progress!\n"); + reg_l = g_atm_dev.mib_counter.tx_cnt_l; + reg_h = g_atm_dev.mib_counter.tx_cnt_h; + } + //QSB done + qd_addr = (u8 *) KSEG1ADDR((unsigned long)g_atm_dev.cbm.qd_addr); + for (i=1;i<15;i++){ + while ( (err=readl(qd_addr+i*CBM_QD_SIZE+0x8)&0xffff) !=0 ){ + mdelay(20); + AMAZON_TPE_DMSG("queue %u not empty (%u)\n",i,err); + } + } + //insurance for interfaces between Aware and CARB + mdelay(100); + amazon_atm_cell_mib(&mib_cell,0); + amazon_atm_cell_mib(&mib_cell,1); + amazon_atm_aal5_mib(&mib_aal5); + + mb(); + while ( (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) || (AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0) != 0 ) ){ + AMAZON_TPE_EMSG("\nwaiting for AWARE"); + AMAZON_TPE_EMSG(" BC0 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC0)); + AMAZON_TPE_EMSG(" BC1 %u ", AMAZON_READ_REGISTER_L(AR_CELLRDY_BC1)); + AMAZON_TPE_EMSG("\n"); + mdelay(1); + } + // disable AAI module + meiDebugRead(A_CFG_ADDR,&a_cfg_value,1); + a_cfg_old_value=a_cfg_value; + a_cfg_value &= (~(0x2800)); + meiDebugWrite(A_CFG_ADDR,&a_cfg_value,1); + //clear buffer + a_cfg_value = 0x1; + meiDebugWrite(AR_CB0_STATUS_ADDR,&a_cfg_value,1); + meiDebugWrite(AR_CB1_STATUS_ADDR,&a_cfg_value,1); + + if ( atm_init_hard(&g_atm_dev) != 0){ + return -EIO; + } + sema_init(&(g_atm_dev.swie.in_sem), 1); + //SWIE lock + clear_bit(SWIE_LOCK, &(g_atm_dev.swie.lock)); + //SWIE wait queue + init_waitqueue_head(&(g_atm_dev.swie.sleep)); + + for (i=CBM_DEFAULT_Q_OFFSET;iqos, i); + set_qd(vcc, i); + mb(); + err=set_htu(vcc,i); + if (err){ + AMAZON_TPE_EMSG("set htu entry fails %u\n",err); + } + } + } + meiDebugWrite(A_CFG_ADDR,&a_cfg_old_value,1); +#if 0 + //reset DFE + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) | (AMAZON_RST_REQ_DFE); + mb(); + *(AMAZON_RST_REQ) = (* AMAZON_RST_REQ) & (~AMAZON_RST_REQ_DFE); + mb(); +#endif + + return 0; +} + +/* Brief: Send a ATM EoP packet to save DMA channel + */ +int amazon_tpe_inject_debug_cell(void) +{ + //Send a ATM cell to save DMA channel + u8 qid; + unsigned char atm_cell[48]; + qid = 0x11; + AMAZON_TPE_DMSG("qid = %d\n",qid); + memset(atm_cell,0,48); + atm_cell[3] = 0x2; + if ( amazon_atm_swin(qid,atm_cell)) { + AMAZON_TPE_EMSG("cannot insert EoP cell\n"); + return -1; + } + return 0; +} + +/* Brief: start HTU (TPE) + */ + +int amazon_tpe_start(void) +{ + AMAZON_WRITE_REGISTER_L(HTU_CFG_START ,HTU_CFG_ADDR); + wmb(); + return 0; +} +#endif //AMAZON_TPE_AAL5_RECOVERY + +#ifdef AMAZON_CHECK_LINK +extern int (*adsl_link_notify)(int); +/* Brief: notify link status of ADSL link + * Parameters: 0 link down + * 1 link up + * Returns: 0 OK + * Details: called by MEI driver + * should update status and inform upper layer + */ +int amazon_tpe_link_notify(int status) +{ + adsl_link_status = status; + AMAZON_TPE_DMSG("link status %s\n",(status==1)?"Up":"Down"); + if (status == 0){ + //wait until no cells in upstream queues + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(2*HZ); + } + return 0; +} +#endif //ifdef AMAZON_CHECK_LINK + +/* + * Brief: Initialize ATM module + * + * Return Value: ENOMEM - No memory available + * EBUSY - Cannot register atm device + * ERESTARTSYS - Process interrupted by other signal + * 0 - OK, module initialized + * + * Description: + * This function registers an atm device for all UTOPIA devices. + * It also allocates memory for the private device data structures + */ +int __init amazon_atm_net_init(void) +{ + int i; + int err=0; + amazon_atm_dev_t *dev = NULL; + + if ((dev=amazon_atm_create()) != NULL){ + for(i=0;iports[i].enable){ + amazon_atm_devs[i] = NULL; + continue; + } + amazon_atm_devs[i] =atm_dev_register("amazon_atm",&amazon_atm_ops,-1,0UL); + if (amazon_atm_devs[i] == NULL){ + AMAZON_TPE_EMSG("atm_dev_register fails\n"); + err = -EIO; + goto amazon_atm_net_init_exit; + }else{ + AMAZON_TPE_DMSG("registering device %u\n",i); + amazon_atm_devs[i]->ci_range.vpi_bits = 8; + amazon_atm_devs[i]->ci_range.vci_bits = 16; + amazon_atm_devs[i]->link_rate = dev->ports[i].tx_max_cr; + amazon_atm_devs[i]->dev_data = (void *) i; + } + } + + }else{ + err = -ENOMEM; + AMAZON_TPE_EMSG("cannot init atm device\n"); + goto amazon_atm_net_init_exit; + } +#ifdef AMAZON_TPE_AAL5_RECOVERY + tpe_reset = & amazon_tpe_reset; + tpe_start = & amazon_tpe_start; + tpe_inject = & amazon_tpe_inject_debug_cell; +#endif //AMAZON_TPE_AAL5_RECOVERY +#ifdef AMAZON_CHECK_LINK + adsl_link_notify=amazon_tpe_link_notify; +#endif //AMAZON_CHECK_LINK +amazon_atm_net_init_exit: + return err; +} + +void __exit amazon_atm_net_cleanup(void) +{ + int i; + amazon_atm_cleanup(); + for(i=0;i ADM6996LC and ADM6996I will be in MDIO/MDC(SMI)(16 bit) mode, +// amazon should contrl ADM6996 by MDC/MDIO pin +// if undef ADM6996_MDC_MDIO_MODE==> ADM6996 will be in EEProm(32 bit) mode, +// amazon should contrl ADM6996 by GPIO15,16,17,18 pin +/* 507281:linmars 2005/07/28 support MDIO/EEPROM config mode */ +/* 509201:linmars remove driver testing codes */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +//#include + + +unsigned int ifx_sw_conf[ADM_SW_MAX_PORT_NUM+1] = \ + {ADM_SW_PORT0_CONF, ADM_SW_PORT1_CONF, ADM_SW_PORT2_CONF, \ + ADM_SW_PORT3_CONF, ADM_SW_PORT4_CONF, ADM_SW_PORT5_CONF}; +unsigned int ifx_sw_bits[8] = \ + {0x1, 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff}; +unsigned int ifx_sw_vlan_port[6] = {0, 2, 4, 6, 7, 8}; +//050613:fchang +/* 507281:linmars start */ +#ifdef CONFIG_SWITCH_ADM6996_MDIO +#define ADM6996_MDC_MDIO_MODE 1 //000001.joelin +#else +#undef ADM6996_MDC_MDIO_MODE +#endif +/* 507281:linmars end */ +#define adm6996i 0 +#define adm6996lc 1 +#define adm6996l 2 +unsigned int adm6996_mode=adm6996i; +/* + initialize GPIO pins. + output mode, low +*/ +void ifx_gpio_init(void) +{ + //GPIO16,17,18 direction:output + //GPIO16,17,18 output 0 + + AMAZON_SW_REG(AMAZON_GPIO_P1_DIR) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC); + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT) =AMAZON_SW_REG(AMAZON_GPIO_P1_IN)& ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); + +} + +/* read one bit from mdio port */ +int ifx_sw_mdio_readbit(void) +{ + //int val; + + //val = (AMAZON_SW_REG(GPIO_conf0_REG) & GPIO0_INPUT_MASK) >> 8; + //return val; + //GPIO16 + return AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&1; +} + +/* + MDIO mode selection + 1 -> output + 0 -> input + + switch input/output mode of GPIO 0 +*/ +void ifx_mdio_mode(int mode) +{ +// AMAZON_SW_REG(GPIO_conf0_REG) = mode ? GPIO_ENABLEBITS : +// ((GPIO_ENABLEBITS | MDIO_INPUT) & ~MDIO_OUTPUT_EN); + mode?(AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)|=GPIO_MDIO): + (AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)&=~GPIO_MDIO); + /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_DIR); + mode?(r|=GPIO_MDIO):(r&=~GPIO_MDIO); + AMAZON_SW_REG(AMAZON_GPIO_P1_DIR)=r;*/ +} + +void ifx_mdc_hi(void) +{ + //GPIO_SET_HI(GPIO_MDC); + //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDC; + /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); + r|=GPIO_MDC; + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ + + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDC; +} + +void ifx_mdio_hi(void) +{ + //GPIO_SET_HI(GPIO_MDIO); + //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDIO; + /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); + r|=GPIO_MDIO; + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ + + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDIO; +} + +void ifx_mdcs_hi(void) +{ + //GPIO_SET_HI(GPIO_MDCS); + //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)|=GPIO_MDCS; + /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); + r|=GPIO_MDCS; + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ + + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)|GPIO_MDCS; +} + +void ifx_mdc_lo(void) +{ + //GPIO_SET_LOW(GPIO_MDC); + //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDC; + /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); + r&=~GPIO_MDC; + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ + + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDC); +} + +void ifx_mdio_lo(void) +{ + //GPIO_SET_LOW(GPIO_MDIO); + //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDIO; + /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); + r&=~GPIO_MDIO; + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ + + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDIO); +} + +void ifx_mdcs_lo(void) +{ + //GPIO_SET_LOW(GPIO_MDCS); + //AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)&=~GPIO_MDCS; + /*int r=AMAZON_SW_REG(AMAZON_GPIO_P1_OUT); + r&=~GPIO_MDCS; + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=r;*/ + + AMAZON_SW_REG(AMAZON_GPIO_P1_OUT)=AMAZON_SW_REG(AMAZON_GPIO_P1_IN)&(~GPIO_MDCS); +} + +/* + mdc pulse + 0 -> 1 -> 0 +*/ +static void ifx_sw_mdc_pulse(void) +{ + ifx_mdc_lo(); + udelay(ADM_SW_MDC_DOWN_DELAY); + ifx_mdc_hi(); + udelay(ADM_SW_MDC_UP_DELAY); + ifx_mdc_lo(); +} + +/* + mdc toggle + 1 -> 0 +*/ +static void ifx_sw_mdc_toggle(void) +{ + ifx_mdc_hi(); + udelay(ADM_SW_MDC_UP_DELAY); + ifx_mdc_lo(); + udelay(ADM_SW_MDC_DOWN_DELAY); +} + +/* + enable eeprom write + For ATC 93C66 type EEPROM; accessing ADM6996 internal EEPROM type registers +*/ +static void ifx_sw_eeprom_write_enable(void) +{ + unsigned int op; + + ifx_mdcs_lo(); + ifx_mdc_lo(); + ifx_mdio_hi(); + udelay(ADM_SW_CS_DELAY); + /* enable chip select */ + ifx_mdcs_hi(); + udelay(ADM_SW_CS_DELAY); + /* start bit */ + ifx_mdio_hi(); + ifx_sw_mdc_pulse(); + + /* eeprom write enable */ + op = ADM_SW_BIT_MASK_4; + while (op) + { + if (op & ADM_SW_EEPROM_WRITE_ENABLE) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3); + while (op) + { + ifx_mdio_lo(); + ifx_sw_mdc_pulse(); + op >>= 1; + } + /* disable chip select */ + ifx_mdcs_lo(); + udelay(ADM_SW_CS_DELAY); + ifx_sw_mdc_pulse(); +} + +/* + disable eeprom write +*/ +static void ifx_sw_eeprom_write_disable(void) +{ + unsigned int op; + + ifx_mdcs_lo(); + ifx_mdc_lo(); + ifx_mdio_hi(); + udelay(ADM_SW_CS_DELAY); + /* enable chip select */ + ifx_mdcs_hi(); + udelay(ADM_SW_CS_DELAY); + + /* start bit */ + ifx_mdio_hi(); + ifx_sw_mdc_pulse(); + /* eeprom write disable */ + op = ADM_SW_BIT_MASK_4; + while (op) + { + if (op & ADM_SW_EEPROM_WRITE_DISABLE) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 3); + while (op) + { + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + /* disable chip select */ + ifx_mdcs_lo(); + udelay(ADM_SW_CS_DELAY); + ifx_sw_mdc_pulse(); +} + +/* + read registers from ADM6996 + serial registers start at 0x200 (addr bit 9 = 1b) + EEPROM registers -> 16bits; Serial registers -> 32bits +*/ +#ifdef ADM6996_MDC_MDIO_MODE //smi mode//000001.joelin +static int ifx_sw_read_adm6996i_smi(unsigned int addr, unsigned int *dat) +{ + addr=(addr<<16)&0x3ff0000; + AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) =(0xC0000000|addr); + while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){}; + *dat=((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x0FFFF); + return 0; +} +#endif + +static int ifx_sw_read_adm6996i(unsigned int addr, unsigned int *dat) +{ + unsigned int op; + + ifx_gpio_init(); + + ifx_mdcs_hi(); + udelay(ADM_SW_CS_DELAY); + + ifx_mdcs_lo(); + ifx_mdc_lo(); + ifx_mdio_lo(); + + udelay(ADM_SW_CS_DELAY); + + /* preamble, 32 bit 1 */ + ifx_mdio_hi(); + op = ADM_SW_BIT_MASK_32; + while (op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* command start (01b) */ + op = ADM_SW_BIT_MASK_2; + while (op) + { + if (op & ADM_SW_SMI_START) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* read command (10b) */ + op = ADM_SW_BIT_MASK_2; + while (op) + { + if (op & ADM_SW_SMI_READ) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* send address A9 ~ A0 */ + op = ADM_SW_BIT_MASK_10; + while (op) + { + if (op & addr) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* turnaround bits */ + op = ADM_SW_BIT_MASK_2; + ifx_mdio_hi(); + while (op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + udelay(ADM_SW_MDC_DOWN_DELAY); + + /* set MDIO pin to input mode */ + ifx_mdio_mode(ADM_SW_MDIO_INPUT); + + /* start read data */ + *dat = 0; +//adm6996i op = ADM_SW_BIT_MASK_32; + op = ADM_SW_BIT_MASK_16;//adm6996i + while (op) + { + *dat <<= 1; + if (ifx_sw_mdio_readbit()) *dat |= 1; + ifx_sw_mdc_toggle(); + + op >>= 1; + } + + /* set MDIO to output mode */ + ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); + + /* dummy clock */ + op = ADM_SW_BIT_MASK_4; + ifx_mdio_lo(); + while(op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + ifx_mdc_lo(); + ifx_mdio_lo(); + ifx_mdcs_hi(); + + /* EEPROM registers */ +//adm6996i if (!(addr & 0x200)) +//adm6996i { +//adm6996i if (addr % 2) +//adm6996i *dat >>= 16; +//adm6996i else +//adm6996i *dat &= 0xffff; +//adm6996i } + + return 0; +} +//adm6996 +static int ifx_sw_read_adm6996l(unsigned int addr, unsigned int *dat) +{ + unsigned int op; + + ifx_gpio_init(); + + ifx_mdcs_hi(); + udelay(ADM_SW_CS_DELAY); + + ifx_mdcs_lo(); + ifx_mdc_lo(); + ifx_mdio_lo(); + + udelay(ADM_SW_CS_DELAY); + + /* preamble, 32 bit 1 */ + ifx_mdio_hi(); + op = ADM_SW_BIT_MASK_32; + while (op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* command start (01b) */ + op = ADM_SW_BIT_MASK_2; + while (op) + { + if (op & ADM_SW_SMI_START) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* read command (10b) */ + op = ADM_SW_BIT_MASK_2; + while (op) + { + if (op & ADM_SW_SMI_READ) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* send address A9 ~ A0 */ + op = ADM_SW_BIT_MASK_10; + while (op) + { + if (op & addr) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* turnaround bits */ + op = ADM_SW_BIT_MASK_2; + ifx_mdio_hi(); + while (op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + udelay(ADM_SW_MDC_DOWN_DELAY); + + /* set MDIO pin to input mode */ + ifx_mdio_mode(ADM_SW_MDIO_INPUT); + + /* start read data */ + *dat = 0; + op = ADM_SW_BIT_MASK_32; + while (op) + { + *dat <<= 1; + if (ifx_sw_mdio_readbit()) *dat |= 1; + ifx_sw_mdc_toggle(); + + op >>= 1; + } + + /* set MDIO to output mode */ + ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); + + /* dummy clock */ + op = ADM_SW_BIT_MASK_4; + ifx_mdio_lo(); + while(op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + ifx_mdc_lo(); + ifx_mdio_lo(); + ifx_mdcs_hi(); + + /* EEPROM registers */ + if (!(addr & 0x200)) + { + if (addr % 2) + *dat >>= 16; + else + *dat &= 0xffff; + } + + return 0; +} + +static int ifx_sw_read(unsigned int addr, unsigned int *dat) +{ +#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin + ifx_sw_read_adm6996i_smi(addr,dat); +#else + if (adm6996_mode==adm6996i) ifx_sw_read_adm6996i(addr,dat); + else ifx_sw_read_adm6996l(addr,dat); +#endif + return 0; + +} + +/* + write register to ADM6996 eeprom registers +*/ +//for adm6996i -start +#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin +static int ifx_sw_write_adm6996i_smi(unsigned int addr, unsigned int dat) +{ + + AMAZON_SW_REG(AMAZON_SW_MDIO_ACC) = ((addr<<16)&0x3ff0000)|dat|0x80000000; + while ((AMAZON_SW_REG(AMAZON_SW_MDIO_ACC))&0x80000000){}; + + return 0; + +} +#endif //ADM6996_MDC_MDIO_MODE //000001.joelin + +static int ifx_sw_write_adm6996i(unsigned int addr, unsigned int dat) +{ + unsigned int op; + + ifx_gpio_init(); + + ifx_mdcs_hi(); + udelay(ADM_SW_CS_DELAY); + + ifx_mdcs_lo(); + ifx_mdc_lo(); + ifx_mdio_lo(); + + udelay(ADM_SW_CS_DELAY); + + /* preamble, 32 bit 1 */ + ifx_mdio_hi(); + op = ADM_SW_BIT_MASK_32; + while (op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* command start (01b) */ + op = ADM_SW_BIT_MASK_2; + while (op) + { + if (op & ADM_SW_SMI_START) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* write command (01b) */ + op = ADM_SW_BIT_MASK_2; + while (op) + { + if (op & ADM_SW_SMI_WRITE) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* send address A9 ~ A0 */ + op = ADM_SW_BIT_MASK_10; + while (op) + { + if (op & addr) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* turnaround bits */ + op = ADM_SW_BIT_MASK_2; + ifx_mdio_hi(); + while (op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + udelay(ADM_SW_MDC_DOWN_DELAY); + + /* set MDIO pin to output mode */ + ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); + + + /* start write data */ + op = ADM_SW_BIT_MASK_16; + while (op) + { + if (op & dat) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_toggle(); + op >>= 1; + } + + // /* set MDIO to output mode */ + // ifx_mdio_mode(ADM_SW_MDIO_OUTPUT); + + /* dummy clock */ + op = ADM_SW_BIT_MASK_4; + ifx_mdio_lo(); + while(op) + { + ifx_sw_mdc_pulse(); + op >>= 1; + } + + ifx_mdc_lo(); + ifx_mdio_lo(); + ifx_mdcs_hi(); + + /* EEPROM registers */ +//adm6996i if (!(addr & 0x200)) +//adm6996i { +//adm6996i if (addr % 2) +//adm6996i *dat >>= 16; +//adm6996i else +//adm6996i *dat &= 0xffff; +//adm6996i } + + return 0; +} +//for adm6996i-end +static int ifx_sw_write_adm6996l(unsigned int addr, unsigned int dat) +{ + unsigned int op; + + ifx_gpio_init(); + + /* enable write */ + ifx_sw_eeprom_write_enable(); + + /* chip select */ + ifx_mdcs_hi(); + udelay(ADM_SW_CS_DELAY); + + /* issue write command */ + /* start bit */ + ifx_mdio_hi(); + ifx_sw_mdc_pulse(); + + /* EEPROM write command */ + op = ADM_SW_BIT_MASK_2; + while (op) + { + if (op & ADM_SW_EEPROM_WRITE) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_pulse(); + op >>= 1; + } + + /* send address A7 ~ A0 */ + op = ADM_SW_BIT_MASK_1 << (EEPROM_TYPE - 1); + + while (op) + { + if (op & addr) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_toggle(); + op >>= 1; + } + + /* start write data */ + op = ADM_SW_BIT_MASK_16; + while (op) + { + if (op & dat) + ifx_mdio_hi(); + else + ifx_mdio_lo(); + + ifx_sw_mdc_toggle(); + op >>= 1; + } + + /* disable cs & wait 1 clock */ + ifx_mdcs_lo(); + udelay(ADM_SW_CS_DELAY); + ifx_sw_mdc_toggle(); + + ifx_sw_eeprom_write_disable(); + + return 0; +} + +static int ifx_sw_write(unsigned int addr, unsigned int dat) +{ +#ifdef ADM6996_MDC_MDIO_MODE //smi mode ////000001.joelin + ifx_sw_write_adm6996i_smi(addr,dat); +#else //000001.joelin + if (adm6996_mode==adm6996i) ifx_sw_write_adm6996i(addr,dat); + else ifx_sw_write_adm6996l(addr,dat); +#endif //000001.joelin + return 0; +} + +/* + do switch PHY reset +*/ +int ifx_sw_reset(void) +{ + /* reset PHY */ + ifx_sw_write(ADM_SW_PHY_RESET, 0); + + return 0; +} + +/* 509201:linmars start */ +#if 0 +/* + check port status +*/ +int ifx_check_port_status(int port) +{ + unsigned int val; + + if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM)) + { + ifx_printf(("error on port number (%d)!!\n", port)); + return -1; + } + + ifx_sw_read(ifx_sw_conf[port], &val); + if (ifx_sw_conf[port]%2) val >>= 16; + /* only 16bits are effective */ + val &= 0xFFFF; + + ifx_printf(("Port %d status (%.8x): \n", port, val)); + + if (val & ADM_SW_PORT_FLOWCTL) + ifx_printf(("\t802.3x flow control supported!\n")); + else + ifx_printf(("\t802.3x flow control not supported!\n")); + + if (val & ADM_SW_PORT_AN) + ifx_printf(("\tAuto negotiation ON!\n")); + else + ifx_printf(("\tAuto negotiation OFF!\n")); + + if (val & ADM_SW_PORT_100M) + ifx_printf(("\tLink at 100M!\n")); + else + ifx_printf(("\tLink at 10M!\n")); + + if (val & ADM_SW_PORT_FULL) + ifx_printf(("\tFull duplex!\n")); + else + ifx_printf(("\tHalf duplex!\n")); + + if (val & ADM_SW_PORT_DISABLE) + ifx_printf(("\tPort disabled!\n")); + else + ifx_printf(("\tPort enabled!\n")); + + if (val & ADM_SW_PORT_TOS) + ifx_printf(("\tTOS enabled!\n")); + else + ifx_printf(("\tTOS disabled!\n")); + + if (val & ADM_SW_PORT_PPRI) + ifx_printf(("\tPort priority first!\n")); + else + ifx_printf(("\tVLAN or TOS priority first!\n")); + + if (val & ADM_SW_PORT_MDIX) + ifx_printf(("\tAuto MDIX!\n")); + else + ifx_printf(("\tNo auto MDIX\n")); + + ifx_printf(("\tPVID: %d\n", \ + ((val >> ADM_SW_PORT_PVID_SHIFT)&ifx_sw_bits[ADM_SW_PORT_PVID_BITS]))); + + return 0; +} +/* + initialize a VLAN + clear all VLAN bits +*/ +int ifx_sw_vlan_init(int vlanid) +{ + ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, 0); + + return 0; +} + +/* + add a port to certain vlan +*/ +int ifx_sw_vlan_add(int port, int vlanid) +{ + int reg = 0; + + if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || + (vlanid > ADM_SW_MAX_VLAN_NUM)) + { + ifx_printf(("Port number or VLAN number ERROR!!\n")); + return -1; + } + ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®); + reg |= (1 << ifx_sw_vlan_port[port]); + ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg); + + return 0; +} + +/* + delete a given port from certain vlan +*/ +int ifx_sw_vlan_del(int port, int vlanid) +{ + unsigned int reg = 0; + + if ((port < 0) || (port > ADM_SW_MAX_PORT_NUM) || (vlanid < 0) || (vlanid > ADM_SW_MAX_VLAN_NUM)) + { + ifx_printf(("Port number or VLAN number ERROR!!\n")); + return -1; + } + ifx_sw_read(ADM_SW_VLAN0_CONF + vlanid, ®); + reg &= ~(1 << ifx_sw_vlan_port[port]); + ifx_sw_write(ADM_SW_VLAN0_CONF + vlanid, reg); + + return 0; +} + +/* + default VLAN setting + + port 0~3 as untag port and PVID = 1 + VLAN1: port 0~3 and port 5 (MII) +*/ +static int ifx_sw_init(void) +{ + ifx_printf(("Setting default ADM6996 registers... \n")); + + /* MAC clone, 802.1q based VLAN */ + ifx_sw_write(ADM_SW_VLAN_MODE, 0xff30); + /* auto MDIX, PVID=1, untag */ + ifx_sw_write(ADM_SW_PORT0_CONF, 0x840f); + ifx_sw_write(ADM_SW_PORT1_CONF, 0x840f); + ifx_sw_write(ADM_SW_PORT2_CONF, 0x840f); + ifx_sw_write(ADM_SW_PORT3_CONF, 0x840f); + /* auto MDIX, PVID=2, untag */ + ifx_sw_write(ADM_SW_PORT5_CONF, 0x880f); + /* port 0~3 & 5 as VLAN1 */ + ifx_sw_write(ADM_SW_VLAN0_CONF+1, 0x0155); + + return 0; +} +#endif +/* 509201:linmars end */ + +int adm_open(struct inode *node, struct file *filp) +{ + MOD_INC_USE_COUNT; + return 0; +} + +ssize_t adm_read(struct file *filep, char *buf, size_t count, loff_t *ppos) +{ + return count; +} + +ssize_t adm_write(struct file *filep, const char *buf, size_t count, loff_t *ppos) +{ + return count; +} + +/* close */ +int adm_release(struct inode *inode, struct file *filp) +{ + MOD_DEC_USE_COUNT; + return 0; +} + +/* IOCTL function */ +int adm_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned long args) +{ + PREGRW uREGRW; + unsigned int rtval; + unsigned int val; //6996i + unsigned int control[6] ; //6996i + unsigned int status[6] ; //6996i + + PMACENTRY mMACENTRY;//adm6996i + PPROTOCOLFILTER uPROTOCOLFILTER ;///adm6996i + + if (_IOC_TYPE(cmd) != ADM_MAGIC) + { + printk("adm_ioctl: IOC_TYPE(%x) != ADM_MAGIC(%x)! \n", _IOC_TYPE(cmd), ADM_MAGIC); + return (-EINVAL); + } + + if(_IOC_NR(cmd) >= KEY_IOCTL_MAX_KEY) + { + printk(KERN_WARNING "adm_ioctl: IOC_NR(%x) invalid! \n", _IOC_NR(cmd)); + return (-EINVAL); + } + + switch (cmd) + { + case ADM_IOCTL_REGRW: + { + uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL); + rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW)); + if (rtval != 0) + { + printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n"); + return (-EFAULT); + } + + switch(uREGRW->mode) + { + case REG_READ: + uREGRW->value = 0x12345678;//inl(uREGRW->addr); + copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW)); + break; + case REG_WRITE: + //outl(uREGRW->value, uREGRW->addr); + break; + + default: + printk("No such Register Read/Write function!! \n"); + return (-EFAULT); + } + kfree(uREGRW); + break; + } + + case ADM_SW_IOCTL_REGRW: + { + unsigned int val = 0xff; + + uREGRW = (PREGRW)kmalloc(sizeof(REGRW), GFP_KERNEL); + rtval = copy_from_user(uREGRW, (PREGRW)args, sizeof(REGRW)); + if (rtval != 0) + { + printk("ADM_IOCTL_REGRW: copy from user FAILED!! \n"); + return (-EFAULT); + } + + switch(uREGRW->mode) + { + case REG_READ: + ifx_sw_read(uREGRW->addr, &val); + uREGRW->value = val; + copy_to_user((PREGRW)args, uREGRW, sizeof(REGRW)); + break; + + case REG_WRITE: + ifx_sw_write(uREGRW->addr, uREGRW->value); + break; + default: + printk("No such Register Read/Write function!! \n"); + return (-EFAULT); + } + kfree(uREGRW); + break; + } +/* 509201:linmars start */ +#if 0 + case ADM_SW_IOCTL_PORTSTS: + for (rtval = 0; rtval < ADM_SW_MAX_PORT_NUM+1; rtval++) + ifx_check_port_status(rtval); + break; + case ADM_SW_IOCTL_INIT: + ifx_sw_init(); + break; +#endif +/* 509201:linmars end */ +//adm6996i + case ADM_SW_IOCTL_MACENTRY_ADD: + case ADM_SW_IOCTL_MACENTRY_DEL: + case ADM_SW_IOCTL_MACENTRY_GET_INIT: + case ADM_SW_IOCTL_MACENTRY_GET_MORE: + + + mMACENTRY = (PMACENTRY)kmalloc(sizeof(MACENTRY), GFP_KERNEL); + rtval = copy_from_user(mMACENTRY, (PMACENTRY)args, sizeof(MACENTRY)); + if (rtval != 0) + { + printk("ADM_SW_IOCTL_MACENTRY: copy from user FAILED!! \n"); + return (-EFAULT); + } + control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ; + control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ; + control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ; + control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4); + if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control + else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer + if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) { + //initial the pointer to the first address + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + control[5]=0x030;//initial the first address + ifx_sw_write(0x11f,control[5]); + + + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + + } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) + if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address + else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address + else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) + control[5]=0x02c;//search by the mac address field + + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + ifx_sw_write(0x11a,control[0]); + ifx_sw_write(0x11b,control[1]); + ifx_sw_write(0x11c,control[2]); + ifx_sw_write(0x11d,control[3]); + ifx_sw_write(0x11e,control[4]); + ifx_sw_write(0x11f,control[5]); + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + val=((val&0x7000)>>12);//result ,status5[14:12] + mMACENTRY->result=val; + + if (!val) { + printk(" Command OK!! \n"); + if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) { + ifx_sw_read(0x120,&(status[0])); + ifx_sw_read(0x121,&(status[1])); + ifx_sw_read(0x122,&(status[2])); + ifx_sw_read(0x123,&(status[3])); + ifx_sw_read(0x124,&(status[4])); + ifx_sw_read(0x125,&(status[5])); + + + mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ; + mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ; + mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ; + mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ; + mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ; + mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ; + mMACENTRY->fid=(status[3]&0xf); + mMACENTRY->portmap=((status[3]>>4)&0x3f); + if (status[5]&0x2) {//static info_ctrl //status5[1]???? + mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff); + mMACENTRY->info_type=1; + } + else {//not static age_timer + mMACENTRY->ctrl.age_timer=(status[4]&0x00ff); + mMACENTRY->info_type=0; + } +//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1] + mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ??? + mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2] + }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) + + } + else if (val==0x001) + printk(" All Entry Used!! \n"); + else if (val==0x002) + printk(" Entry Not Found!! \n"); + else if (val==0x003) + printk(" Try Next Entry!! \n"); + else if (val==0x005) + printk(" Command Error!! \n"); + else + printk(" UnKnown Error!! \n"); + + copy_to_user((PMACENTRY)args, mMACENTRY,sizeof(MACENTRY)); + + break; + + case ADM_SW_IOCTL_FILTER_ADD: + case ADM_SW_IOCTL_FILTER_DEL: + case ADM_SW_IOCTL_FILTER_GET: + + uPROTOCOLFILTER = (PPROTOCOLFILTER)kmalloc(sizeof(PROTOCOLFILTER), GFP_KERNEL); + rtval = copy_from_user(uPROTOCOLFILTER, (PPROTOCOLFILTER)args, sizeof(PROTOCOLFILTER)); + if (rtval != 0) + { + printk("ADM_SW_IOCTL_FILTER_ADD: copy from user FAILED!! \n"); + return (-EFAULT); + } + + if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter + uPROTOCOLFILTER->ip_p=00; //delet filter + uPROTOCOLFILTER->action=00; //delete filter + } //delete filter + + ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7 + + if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){ + if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p + else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p + } + else { + if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p + else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p + } + if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7 + + ifx_sw_read(0x95, &val); //protocol filter action + if(cmd==ADM_SW_IOCTL_FILTER_GET) { + uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action + copy_to_user((PPROTOCOLFILTER)args, uPROTOCOLFILTER, sizeof(PROTOCOLFILTER)); + + } + else { + val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2)); + // printk("%d----\n",val); + ifx_sw_write(0x95, val); //write protocol filter action + } + + break; +//adm6996i + + /* others */ + default: + return -EFAULT; + } + /* end of switch */ + return 0; +} + +/* Santosh: handle IGMP protocol filter ADD/DEL/GET */ +int adm_process_protocol_filter_request (unsigned int cmd, PPROTOCOLFILTER uPROTOCOLFILTER) +{ + unsigned int val; //6996i + + if(cmd==ADM_SW_IOCTL_FILTER_DEL) { //delete filter + uPROTOCOLFILTER->ip_p=00; //delet filter + uPROTOCOLFILTER->action=00; //delete filter + } //delete filter + + ifx_sw_read(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), &val);//rx68~rx6b,protocol filter0~7 + + if (((uPROTOCOLFILTER->protocol_filter_num)%2)==00){ + if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= val&0x00ff;//get filter ip_p + else val=(val&0xff00)|(uPROTOCOLFILTER->ip_p);//set filter ip_p + } + else { + if(cmd==ADM_SW_IOCTL_FILTER_GET) uPROTOCOLFILTER->ip_p= (val>>8);//get filter ip_p + else val=(val&0x00ff)|((uPROTOCOLFILTER->ip_p)<<8);//set filter ip_p + } + if(cmd!=ADM_SW_IOCTL_FILTER_GET) ifx_sw_write(((uPROTOCOLFILTER->protocol_filter_num/2)+0x68), val);//write rx68~rx6b,protocol filter0~7 + + ifx_sw_read(0x95, &val); //protocol filter action + if(cmd==ADM_SW_IOCTL_FILTER_GET) { + uPROTOCOLFILTER->action= ((val>>(uPROTOCOLFILTER->protocol_filter_num*2))&0x3);//get filter action + } + else { + val=(val&(~(0x03<<(uPROTOCOLFILTER->protocol_filter_num*2))))|(((uPROTOCOLFILTER->action)&0x03)<<(uPROTOCOLFILTER->protocol_filter_num*2)); + ifx_sw_write(0x95, val); //write protocol filter action + } + + return 0; +} + + +/* Santosh: function for MAC ENTRY ADD/DEL/GET */ + +int adm_process_mac_table_request (unsigned int cmd, PMACENTRY mMACENTRY) +{ + unsigned int rtval; + unsigned int val; //6996i + unsigned int control[6] ; //6996i + unsigned int status[6] ; //6996i + + // printk ("adm_process_mac_table_request: enter\n"); + + control[0]=(mMACENTRY->mac_addr[1]<<8)+mMACENTRY->mac_addr[0] ; + control[1]=(mMACENTRY->mac_addr[3]<<8)+mMACENTRY->mac_addr[2] ; + control[2]=(mMACENTRY->mac_addr[5]<<8)+mMACENTRY->mac_addr[4] ; + control[3]=(mMACENTRY->fid&0xf)+((mMACENTRY->portmap&0x3f)<<4); + + if (((mMACENTRY->info_type)&0x01)) control[4]=(mMACENTRY->ctrl.info_ctrl)+0x1000; //static ,info control + else control[4]=((mMACENTRY->ctrl.age_timer)&0xff);//not static ,agetimer + if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) { + //initial the pointer to the first address + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + control[5]=0x030;//initial the first address + ifx_sw_write(0x11f,control[5]); + + + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + + } //if (cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT) + if (cmd==ADM_SW_IOCTL_MACENTRY_ADD) control[5]=0x07;//create a new address + else if (cmd==ADM_SW_IOCTL_MACENTRY_DEL) control[5]=0x01f;//erased an existed address + else if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) + control[5]=0x02c;//search by the mac address field + + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + ifx_sw_write(0x11a,control[0]); + ifx_sw_write(0x11b,control[1]); + ifx_sw_write(0x11c,control[2]); + ifx_sw_write(0x11d,control[3]); + ifx_sw_write(0x11e,control[4]); + ifx_sw_write(0x11f,control[5]); + val=0x8000;//busy ,status5[15] + while(val&0x8000){ //check busy ? + ifx_sw_read(0x125, &val); + } + val=((val&0x7000)>>12);//result ,status5[14:12] + mMACENTRY->result=val; + + if (!val) { + printk(" Command OK!! \n"); + if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) { + ifx_sw_read(0x120,&(status[0])); + ifx_sw_read(0x121,&(status[1])); + ifx_sw_read(0x122,&(status[2])); + ifx_sw_read(0x123,&(status[3])); + ifx_sw_read(0x124,&(status[4])); + ifx_sw_read(0x125,&(status[5])); + + + mMACENTRY->mac_addr[0]=(status[0]&0x00ff) ; + mMACENTRY->mac_addr[1]=(status[0]&0xff00)>>8 ; + mMACENTRY->mac_addr[2]=(status[1]&0x00ff) ; + mMACENTRY->mac_addr[3]=(status[1]&0xff00)>>8 ; + mMACENTRY->mac_addr[4]=(status[2]&0x00ff) ; + mMACENTRY->mac_addr[5]=(status[2]&0xff00)>>8 ; + mMACENTRY->fid=(status[3]&0xf); + mMACENTRY->portmap=((status[3]>>4)&0x3f); + if (status[5]&0x2) {//static info_ctrl //status5[1]???? + mMACENTRY->ctrl.info_ctrl=(status[4]&0x00ff); + mMACENTRY->info_type=1; + } + else {//not static age_timer + mMACENTRY->ctrl.age_timer=(status[4]&0x00ff); + mMACENTRY->info_type=0; + } +//status5[13]???? mMACENTRY->occupy=(status[5]&0x02)>>1;//status5[1] + mMACENTRY->occupy=(status[5]&0x02000)>>13;//status5[13] ??? + mMACENTRY->bad=(status[5]&0x04)>>2;//status5[2] + }//if ((cmd==ADM_SW_IOCTL_MACENTRY_GET_INIT)||(cmd==ADM_SW_IOCTL_MACENTRY_GET_MORE)) + + } + else if (val==0x001) + printk(" All Entry Used!! \n"); + else if (val==0x002) + printk(" Entry Not Found!! \n"); + else if (val==0x003) + printk(" Try Next Entry!! \n"); + else if (val==0x005) + printk(" Command Error!! \n"); + else + printk(" UnKnown Error!! \n"); + + // printk ("adm_process_mac_table_request: Exit\n"); + return 0; +} + +/* Santosh: End of function for MAC ENTRY ADD/DEL*/ +struct file_operations adm_ops = +{ + read: adm_read, + write: adm_write, + open: adm_open, + release: adm_release, + ioctl: adm_ioctl +}; + +int adm_proc(char *buf, char **start, off_t offset, int count, int *eof, void *data) +{ + int len = 0; + + len += sprintf(buf+len, " ************ Registers ************ \n"); + *eof = 1; + return len; +} + +int __init init_adm6996_module(void) +{ + unsigned int val = 000; + unsigned int val1 = 000; + + printk("Loading ADM6996 driver... \n"); + + /* if running on adm5120 */ + /* set GPIO 0~2 as adm6996 control pins */ + //outl(0x003f3f00, 0x12000028); + /* enable switch port 5 (MII) as RMII mode (5120MAC <-> 6996MAC) */ + //outl(0x18a, 0x12000030); + /* group adm5120 port 1 ~ 5 as VLAN0, port 5 & 6(CPU) as VLAN1 */ + //outl(0x417e, 0x12000040); + /* end adm5120 fixup */ +#ifdef ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin + register_chrdev(69, "adm6996", &adm_ops); + AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x27be; + AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xfc; + adm6996_mode=adm6996i; + ifx_sw_read(0xa0, &val); + ifx_sw_read(0xa1, &val1); + val=((val1&0x0f)<<16)|val; + printk ("\nADM6996 SMI Mode-"); + printk ("Chip ID:%5x \n ", val); +#else //000001.joelin + + AMAZON_SW_REG(AMAZON_SW_MDIO_CFG) = 0x2c50; + AMAZON_SW_REG(AMAZON_SW_EPHY) = 0xff; + + AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL0) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); + AMAZON_SW_REG(AMAZON_GPIO_P1_ALTSEL1) &= ~(GPIO_MDIO|GPIO_MDCS|GPIO_MDC); + AMAZON_SW_REG(AMAZON_GPIO_P1_OD) |= (GPIO_MDIO|GPIO_MDCS|GPIO_MDC); + + ifx_gpio_init(); + register_chrdev(69, "adm6996", &adm_ops); + mdelay(100); + + /* create proc entries */ + // create_proc_read_entry("admide", 0, NULL, admide_proc, NULL); + +//joelin adm6996i support start + adm6996_mode=adm6996i; + ifx_sw_read(0xa0, &val); + adm6996_mode=adm6996l; + ifx_sw_read(0x200, &val1); +// printk ("\n %0x \n",val1); + if ((val&0xfff0)==0x1020) { + printk ("\n ADM6996I .. \n"); + adm6996_mode=adm6996i; + } + else if ((val1&0xffffff00)==0x71000) {//71010 or 71020 + printk ("\n ADM6996LC .. \n"); + adm6996_mode=adm6996lc; + } + else { + printk ("\n ADM6996L .. \n"); + adm6996_mode=adm6996l; + } +#endif //ADM6996_MDC_MDIO_MODE //smi mode //000001.joelin + + if ((adm6996_mode==adm6996lc)||(adm6996_mode==adm6996i)){ +#if 0 /* removed by MarsLin */ + ifx_sw_write(0x29,0xc000); + ifx_sw_write(0x30,0x0985); +#else + ifx_sw_read(0xa0, &val); + if (val == 0x1021) // for both 6996LC and 6996I, only AB version need the patch + ifx_sw_write(0x29, 0x9000); + ifx_sw_write(0x30,0x0985); +#endif + } +//joelin adm6996i support end + return 0; +} + +void __exit cleanup_adm6996_module(void) +{ + printk("Free ADM device driver... \n"); + + unregister_chrdev(69, "adm6996"); + + /* remove proc entries */ + // remove_proc_entry("admide", NULL); +} + +/* MarsLin, add start */ +#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE) + #define SET_BIT(reg, mask) reg |= (mask) + #define CLEAR_BIT(reg, mask) reg &= (~mask) + static int ifx_hw_reset(void) + { + CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL0),0x2000); + CLEAR_BIT((*AMAZON_GPIO_P0_ALTSEL1),0x2000); + SET_BIT((*AMAZON_GPIO_P0_OD),0x2000); + SET_BIT((*AMAZON_GPIO_P0_DIR), 0x2000); + CLEAR_BIT((*AMAZON_GPIO_P0_OUT), 0x2000); + mdelay(500); + SET_BIT((*AMAZON_GPIO_P0_OUT), 0x2000); + cleanup_adm6996_module(); + return init_adm6996_module(); + } + int (*adm6996_hw_reset)(void) = ifx_hw_reset; + EXPORT_SYMBOL(adm6996_hw_reset); + EXPORT_SYMBOL(adm6996_mode); + int (*adm6996_sw_read)(unsigned int addr, unsigned int *data) = ifx_sw_read; + EXPORT_SYMBOL(adm6996_sw_read); + int (*adm6996_sw_write)(unsigned int addr, unsigned int data) = ifx_sw_write; + EXPORT_SYMBOL(adm6996_sw_write); +#endif +/* MarsLin, add end */ + +/* Santosh: for IGMP proxy/snooping, Begin */ +EXPORT_SYMBOL (adm_process_mac_table_request); +EXPORT_SYMBOL (adm_process_protocol_filter_request); +/* Santosh: for IGMP proxy/snooping, End */ + +MODULE_DESCRIPTION("ADMtek 6996 Driver"); +MODULE_AUTHOR("Joe Lin "); +MODULE_LICENSE("GPL"); + +module_init(init_adm6996_module); +module_exit(cleanup_adm6996_module); + diff --git a/target/linux/amazon/files/drivers/char/amazon_mei.c b/target/linux/amazon/files/drivers/char/amazon_mei.c new file mode 100644 index 0000000000..7efe52ed60 --- /dev/null +++ b/target/linux/amazon/files/drivers/char/amazon_mei.c @@ -0,0 +1,7918 @@ +/* ============================================================================ + * Copyright (C) 2004 -Infineon Technologies AG. + * + * All rights reserved. + * ============================================================================ + * + *============================================================================ + * Licensed under GNU GPL v2 + * ============================================================================ + */ + + +/* =========================================================================== + * + * File Name: amazon_mei.c + * Author : Ou Ke + * + * =========================================================================== + * + * Project: Amazon + * + * =========================================================================== + * Contents:This file implements the MEI driver for Amazon ADSL/ADSL2+ + * controller. + * + * =========================================================================== + * References: + * + */ + + +/* =========================================================================== + * Revision History: + * 12/1/2005 : Ritesh Banerjee + * - Create a kernel thread kmibpoll to poll for periodic RFC 2662 + * and RFC 3440 counters. Removes the need for user space + * adsl_mibpoll_daemon and saves atleast 30KB of RAM. + * + * $Log$ + * =========================================================================== + */ + +/* + * =========================================================================== + * INCLUDE FILES + * =========================================================================== + */ +//000002:fchang 2005/6/2 joelin 04/27/2005 for pcm clock +//000003:fchang 2005/6/2 Henry added for Amazon-E support +//165001:henryhsu 2005/9/6 Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash. +// 509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC +// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics + +#ifndef EXPORT_SYMTAB +#define EXPORT_SYMTAB +#endif +#define AMAZON_MEI_MIB_RFC3440 + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define SET_BIT(reg, mask) reg |= (mask) +#define CLEAR_BIT(reg, mask) reg &= (~mask) +#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask) +#define SET_BITS(reg, mask) SET_BIT(reg, mask) +#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);} + +extern void mask_and_ack_amazon_irq(unsigned int irq_nr); + +#ifdef AMAZON_CHECK_LINK +//amazon_tpe.c +extern int (*adsl_link_notify)(int); +#endif //AMAZON_CHECK_LINK + +// for ARC memory access +#define WHILE_DELAY 20000 +#define AMAZON_DMA_DEBUG_MUTEX + + +//TODO +#undef DFE_LOOPBACK +#define ARC_READY_ACK + +static amazon_mei_mib * current_intvl; +static struct list_head interval_list; +static amazon_mei_mib * mei_mib; + +static int reboot_firsttime=1;//000002:fchang + + //PCM +#define PCM_CHANNEL_NUM 2 //1 rx, 1 tx +static pcm_data_struct pcm_data[PCM_CHANNEL_NUM]__attribute__ ((aligned(4))); //0=tx0, 1=rx0, 2=tx1, 3=rx1 +static u32 pcm_start_addr; +//#define PCM_HRT_TIME_HZ 4000 //?us +#define PCM_ACCESS_DEBUG +static int irqtimes=0; +#undef DATA_LED_ON_MODE +#define ADSL_LED_SUPPORT //joelin for adsl led +#ifdef ADSL_LED_SUPPORT +static int firmware_support_led=0; //joelin version check for adsl led +static int stop_led_module=0; //wakeup and clean led module +static int led_support_check=0; //1.1.2.7.1.1 +#endif //ADSL_LED_SUPPORT +#define IFX_DYING_GASP +#ifdef IFX_DYING_GASP +static wait_queue_head_t wait_queue_dying_gasp; //dying gasp +//struct tq_struct dying_gasp_task; //dying gasp +static wait_queue_head_t wait_queue_uas_poll; //joelin 04/16/2005 +static u16 unavailable_seconds=0; //joelin 04/16/2005 +static meidebug lop_debugwr; //dying gasp +#endif //IFX_DYING_GASP +static int dbg_int=0; +//#define DEBUG_ACCESS_DELAY for(dbg_int=0;dbg_int<100;dbg_int++){;} +#define DEBUG_ACCESS_DELAY +static u8 sampledata[512]; +static int firsttime[PCM_CHANNEL_NUM]={0,1}; +static int num_cmp[PCM_CHANNEL_NUM]={0,0}; +static int pcm_start_loc[PCM_CHANNEL_NUM]={0,0}; + + // for clearEoC +//#define MEI_CLREOC_BUFF_SIZE 512 //double the receive fifo size, bytes +//static u8 clreoc[MEI_CLREOC_BUFF_SIZE]__attribute__ ((aligned(4))); //buffer to hold clearEoC data in bytes +#undef AMAZON_CLEAR_EOC +#ifdef AMAZON_CLEAR_EOC +extern void ifx_push_eoc(struct sk_buff * pkt); +#endif +static int meiResetArc(void); +#define IFX_POP_EOC_DONE 0 +#define IFX_POP_EOC_FAIL -1 +static struct list_head clreoc_list; +static amazon_clreoc_pkt * clreoc_pkt; +#define CLREOC_BUFF_SIZE 12 //number of clreoc commands being buffered +//static int clreoc_wr=0; +//static int clreoc_rd=0; //used to control clreoc circular buffer +static wait_queue_head_t wait_queue_clreoc; +#ifdef ADSL_LED_SUPPORT +static wait_queue_head_t wait_queue_led; //adsl led +static wait_queue_head_t wait_queue_led_polling;// adsl led +struct tq_struct led_task; // adsl led +static DECLARE_TASK_QUEUE(tq_ifx_led); // task +int adsl_led_flash_task(void *ptr); // adsl led +#endif //ADSL_LED_SUPPORT +static void * clreoc_command_pkt=NULL; +static int clreoc_max_tx_len=0; + +// 603221:tc.chen start +#define ME_HDLC_IDLE 0 +#define ME_HDLC_INVALID_MSG 1 +#define ME_HDLC_MSG_QUEUED 2 +#define ME_HDLC_MSG_SENT 3 +#define ME_HDLC_RESP_RCVD 4 +#define ME_HDLC_RESP_TIMEOUT 5 +#define ME_HDLC_RX_BUF_OVERFLOW 6 +#define ME_HDLC_UNRESOLVED 1 +#define ME_HDLC_RESOLVED 2 +// 603221:tc.chen end + +#ifdef LOCK_RETRY +static int reboot_lock=0; +#endif + +static mib_previous_read mib_pread={0,0,0,0,0,0,0,0,0,0,0,0}; +static mib_flags_pretime mib_pflagtime;// initialized when module loaded + + static u32 ATUC_PERF_LOFS=0; + static u32 ATUC_PERF_LOSS=0; + static u32 ATUC_PERF_ESS=0; + static u32 ATUC_PERF_INITS=0; + static u32 ATUR_PERF_LOFS=0; + static u32 ATUR_PERF_LOSS=0; + static u32 ATUR_PERF_LPR=0; + static u32 ATUR_PERF_ESS=0; + static u32 ATUR_CHAN_RECV_BLK=0; + static u32 ATUR_CHAN_TX_BLK=0; + static u32 ATUR_CHAN_CORR_BLK=0; + static u32 ATUR_CHAN_UNCORR_BLK=0; + //RFC-3440 + static u32 ATUC_PERF_STAT_FASTR=0; + static u32 ATUC_PERF_STAT_FAILED_FASTR=0; + static u32 ATUC_PERF_STAT_SESL=0; + static u32 ATUC_PERF_STAT_UASL=0; + static u32 ATUR_PERF_STAT_SESL=0; + static u32 ATUR_PERF_STAT_UASL=0; + + static adslChanPrevTxRate PrevTxRate={0,0}; + static adslPhysCurrStatus CurrStatus={0,0}; + static ChanType chantype={0,0}; + static adslLineAlarmConfProfileEntry AlarmConfProfile={"No Name\0",0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1}; +// 603221:tc.chen start + static adslFarEndPerfStats FarendStatsData; + struct timeval FarendData_acquire_time={0}; + static u32 adsl_mode,adsl_mode_extend; // adsl mode : adsl/ 2/ 2+ + static adslInitStats AdslInitStatsData; +//603221:tc.chen end +static u32 loop_diagnostics_mode=0; +static wait_queue_head_t wait_queue_loop_diagnostic; +#ifdef AMAZON_MEI_MIB_RFC3440 + static adslLineAlarmConfProfileExtEntry AlarmConfProfileExt={"No Name\0",0,0,0,0,0,0}; +#endif + +static int showtime=0; +static int loop_diagnostics_completed=0; +////////////////////////////////////////////////////////////////////////////////// +static int phy_mei_net_init(struct net_device * dev); +static int interleave_mei_net_init(struct net_device * dev); +static int fast_mei_net_init(struct net_device * dev); +static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev); +static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev); +static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev); + +typedef struct mei_priv{ + struct net_device_stats stats; +}mei_priv; + +static struct net_device phy_mei_net = { init: phy_mei_net_init, name: "MEI_PHY"}; +static struct net_device interleave_mei_net = { init: interleave_mei_net_init, name: "MEI_INTL"}; +static struct net_device fast_mei_net = { init: fast_mei_net_init, name: "MEI_FAST"}; +/////////////////////////////////////////////////////////////////////////////////// + +static int major=AMAZON_MEI_MAJOR; + +static struct semaphore mei_sema; + +// Mei to ARC CMV count, reply count, ARC Indicator count +static int indicator_count=0; +static int cmv_count=0; +static int reply_count=0; +static u16 Recent_indicator[MSG_LENGTH]; + +// Used in interrupt handler as flags +static int arcmsgav=0; +static int cmv_reply=0; +static int cmv_waiting=0; + +#define PROC_ITEMS 8 + +long mei_debug_mode = 0; //509221:tc.chen for adsl firmware debug + +// to wait for arc cmv reply, sleep on wait_queue_arcmsgav; +static wait_queue_head_t wait_queue_arcmsgav; +static wait_queue_head_t wait_queue_codeswap; +static wait_queue_head_t wait_queue_mibdaemon; +static wait_queue_head_t wait_queue_reboot; +static u32 * image_buffer=NULL; // holding adsl firmware image +static u16 RxMessage[MSG_LENGTH]__attribute__ ((aligned(4))); +static u16 TxMessage[MSG_LENGTH]__attribute__ ((aligned(4))); +static u32 * mei_arc_swap_buff=NULL; // holding swap pages +static ARC_IMG_HDR * img_hdr; +static int reboot_flag; + +#ifdef DFE_LOOPBACK +#include "arc_pm.h" +#endif + + +///////////////// net device /////////////////////////////////////////////////// +static int phy_mei_net_init(struct net_device * dev) +{ + //ether_setup(dev); + dev->get_stats = phy_mei_net_get_stats; + dev->ip_ptr = NULL; + dev->type = 94; + +// dev->mtu=12345; + dev->flags=IFF_UP; + + dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); + if(dev->priv == NULL) + return -ENOMEM; + memset(dev->priv, 0, sizeof(struct mei_priv)); + return 0; +} + +static int interleave_mei_net_init(struct net_device * dev) +{ + //ether_setup(dev); + dev->get_stats = interleave_mei_net_get_stats; + dev->ip_ptr = NULL; + dev->type = 124; + dev->flags=IFF_UP; + dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); + if(dev->priv == NULL) + return -ENOMEM; + memset(dev->priv, 0, sizeof(struct mei_priv)); + return 0; +} + +static int fast_mei_net_init(struct net_device * dev) +{ + //ether_setup(dev); + dev->get_stats = fast_mei_net_get_stats; + dev->ip_ptr = NULL; + dev->type = 125; + dev->flags=IFF_UP; + dev->priv = kmalloc(sizeof(struct mei_priv), GFP_KERNEL); + if(dev->priv == NULL) + return -ENOMEM; + memset(dev->priv, 0, sizeof(struct mei_priv)); + return 0; +} + +static struct net_device_stats * phy_mei_net_get_stats(struct net_device * dev) +{ + struct mei_priv * priv; + priv = (struct mei_priv *)dev->priv; + // update statistics + (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; + (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; + (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; + (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; + + return &(priv->stats); +} + +static struct net_device_stats * interleave_mei_net_get_stats(struct net_device * dev) +{ + struct mei_priv * priv; + priv = (struct mei_priv *)dev->priv; + // update statistics + (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; + (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; + (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; + (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; + + return &(priv->stats); +} + +static struct net_device_stats * fast_mei_net_get_stats(struct net_device * dev) +{ + struct mei_priv * priv; + priv = (struct mei_priv *)dev->priv; + // update statistics + (priv->stats).rx_packets = ATUR_CHAN_RECV_BLK; + (priv->stats).tx_packets = ATUR_CHAN_TX_BLK; + (priv->stats).rx_errors = ATUR_CHAN_CORR_BLK + ATUR_CHAN_UNCORR_BLK; + (priv->stats).rx_dropped = ATUR_CHAN_UNCORR_BLK; + + return &(priv->stats); +} +///////////////// mei access Rd/Wr methods /////////////////////////////////////////////////// +void meiLongwordWrite(u32 ul_address, u32 ul_data) +{ + *((volatile u32 *)ul_address) = ul_data; + asm("SYNC"); + return; +} // end of "meiLongwordWrite(..." + +void meiLongwordRead(u32 ul_address, u32 *pul_data) +{ + *pul_data = *((volatile u32 *)ul_address); + asm("SYNC"); + return; +} // end of "meiLongwordRead(..." + +MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; + u32 flags; + + if( destaddr & 3) + return MEI_FAILURE; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Set the write transfer address + meiLongwordWrite(MEI_XFR_ADDR, destaddr); + + // Write the data pushed across DMA + while (databuffsize--) + { + temp = *p; + if(databuff==(u32 *)TxMessage) // swap half word + temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); + meiLongwordWrite(MEI_DATA_XFR, temp); + p++; + } // end of "while(..." + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMAWrite(..." + +MEI_ERROR meiDMAWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; + u32 flags; + + if( destaddr & 3) + return MEI_FAILURE; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Set the write transfer address + meiLongwordWrite(MEI_XFR_ADDR, destaddr); + + // Write the data pushed across DMA + while (databuffsize--) + { + temp = *p; + temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word + meiLongwordWrite(MEI_DATA_XFR, temp); + p++; + } // end of "while(..." + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMAWrite_16(..." + +MEI_ERROR meiDMAWrite_8(u32 destaddr, u32 *databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; + u32 flags; + + if( destaddr & 3) + return MEI_FAILURE; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Set the write transfer address + meiLongwordWrite(MEI_XFR_ADDR, destaddr); + + // Write the data pushed across DMA + while (databuffsize--) + { + temp = *p; + temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte + meiLongwordWrite(MEI_DATA_XFR, temp); + p++; + } // end of "while(..." + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMAWrite_8(..." + +MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; + u32 flags; + + if( srcaddr & 3) + return MEI_FAILURE; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Set the read transfer address + meiLongwordWrite(MEI_XFR_ADDR, srcaddr); + + // Read the data popped across DMA + while (databuffsize--) + { + meiLongwordRead(MEI_DATA_XFR, &temp); + if(databuff==(u32 *)RxMessage) // swap half word + temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); + *p=temp; + p++; + } // end of "while(..." + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMARead(..." + +MEI_ERROR meiDMARead_16(u32 srcaddr, u32 *databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; + u32 flags; + + if( srcaddr & 3) + return MEI_FAILURE; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Set the read transfer address + meiLongwordWrite(MEI_XFR_ADDR, srcaddr); + + // Read the data popped across DMA + while (databuffsize--) + { + meiLongwordRead(MEI_DATA_XFR, &temp); + temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16); + *p=temp; + p++; + } // end of "while(..." + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMARead_16(..." + +MEI_ERROR meiDMARead_8(u32 srcaddr, u32 *databuff, u32 databuffsize) +{ + u32 *p = databuff; + u32 temp; + u32 flags; + + if( srcaddr & 3) + return MEI_FAILURE; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Set the read transfer address + meiLongwordWrite(MEI_XFR_ADDR, srcaddr); + + // Read the data popped across DMA + while (databuffsize--) + { + meiLongwordRead(MEI_DATA_XFR, &temp); + temp = ((temp & 0xff)<<24) + ((temp & 0xff00)<<8)+ ((temp & 0xff0000)>>8)+ ((temp & 0xff000000)>>24);//swap byte + *p=temp; + p++; + } // end of "while(..." + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + return MEI_SUCCESS; + +} // end of "meiDMARead_8(..." + +void meiPollForDbgDone(void) +{ + u32 query = 0; + int i=0; + while (i>8)+ ((temp & 0xff000000)>>24);//swap byte + meiLongwordWrite(MEI_DEBUG_DATA, temp); + DEBUG_ACCESS_DELAY; + meiPollForDbgDone(); + address += 4; + buffer++; + } // end of "for(..." + + // Close the debug port after DMP memory write + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp &= ~(HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + // Return + return MEI_SUCCESS; + +} // end of "meiDebugWrite_8(..." + +MEI_ERROR meiDebugRead_8(u32 srcaddr, u32 *databuff, u32 databuffsize) +{ + u32 i; + u32 temp = 0x0; + u32 address = 0x0; + u32 *buffer = 0x0; + u32 flags; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Open the debug port before DMP memory read + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp |= (HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); + DEBUG_ACCESS_DELAY; + + // For the requested length, write the address and read the data + address = srcaddr; + buffer = databuff; + for (i=0; i>8)+ ((temp & 0xff000000)>>24);//swap byte + *buffer=temp; + address += 4; + buffer++; + } // end of "for(..." + + // Close the debug port after DMP memory read + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp &= ~(HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + // Return + return MEI_SUCCESS; + +} // end of "meiDebugRead_8(..." + +MEI_ERROR meiDebugWrite_16(u32 destaddr, u32 *databuff, u32 databuffsize) +{ + u32 i; + u32 temp = 0x0; + u32 address = 0x0; + u32 *buffer = 0x0; + u32 flags; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Open the debug port before DMP memory write + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp |= (HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); + DEBUG_ACCESS_DELAY; + + // For the requested length, write the address and write the data + address = destaddr; + buffer = databuff; + for (i=0; i < databuffsize; i++) + { + meiLongwordWrite(MEI_DEBUG_WAD, address); + DEBUG_ACCESS_DELAY; + temp=*buffer; + temp = ((temp & 0xffff)<<16) + ((temp & 0xffff0000)>>16);//swap half word + meiLongwordWrite(MEI_DEBUG_DATA, temp); + DEBUG_ACCESS_DELAY; + meiPollForDbgDone(); + address += 4; + buffer++; + } // end of "for(..." + + // Close the debug port after DMP memory write + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp &= ~(HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + // Return + return MEI_SUCCESS; + +} // end of "meiDebugWrite_16(..." + +MEI_ERROR meiDebugRead_16(u32 srcaddr, u32 *databuff, u32 databuffsize) +{ + u32 i; + u32 temp = 0x0; + u32 address = 0x0; + u32 *buffer = 0x0; + u32 flags; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Open the debug port before DMP memory read + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp |= (HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); + DEBUG_ACCESS_DELAY; + + // For the requested length, write the address and read the data + address = srcaddr; + buffer = databuff; + for (i=0; i>16);//swap half word + *buffer=temp; + address += 4; + buffer++; + } // end of "for(..." + + // Close the debug port after DMP memory read + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp &= ~(HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + // Return + return MEI_SUCCESS; + +} // end of "meiDebugRead_16(..." + +MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize) +{ + u32 i; + u32 temp = 0x0; + u32 address = 0x0; + u32 *buffer = 0x0; + u32 flags; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Open the debug port before DMP memory write + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp |= (HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK); + DEBUG_ACCESS_DELAY; + + // For the requested length, write the address and write the data + address = destaddr; + buffer = databuff; + for (i=0; i < databuffsize; i++) + { + meiLongwordWrite(MEI_DEBUG_WAD, address); + DEBUG_ACCESS_DELAY; + temp=*buffer; + meiLongwordWrite(MEI_DEBUG_DATA, temp); + DEBUG_ACCESS_DELAY; + meiPollForDbgDone(); + address += 4; + buffer++; + } // end of "for(..." + + // Close the debug port after DMP memory write + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp &= ~(HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + restore_flags(flags); +#endif + + // Return + return MEI_SUCCESS; + +} // end of "meiDebugWrite(..." + +MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize) +{ + u32 i; + u32 temp = 0x0; + u32 address = 0x0; + u32 *buffer = 0x0; + u32 flags; + +#ifdef AMAZON_DMA_DEBUG_MUTEX + save_flags(flags); + cli(); +#endif + + + // Open the debug port before DMP memory read + meiLongwordRead(MEI_CONTROL, &temp); + DEBUG_ACCESS_DELAY; + temp |= (HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, temp); + DEBUG_ACCESS_DELAY; + meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP2_MASK); + DEBUG_ACCESS_DELAY; + + // For the requested length, write the address and read the data + address = srcaddr; + buffer = databuff; + for (i=0; icount; boot_loop++) + { + if( img_hdr->page[boot_loop].p_size & BOOT_FLAG) + { + page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); + if( page_size > 0) + { + meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size); + } + } + if( img_hdr->page[boot_loop].d_size & BOOT_FLAG) + { + page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); + if( page_size > 0) + { + meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size); + } + } + } +#ifdef AMAZON_MEI_DEBUG_ON +// printk("\n\n pages downloaded"); +#endif + return MEI_SUCCESS; + +} // end of "meiDownloadBootCode(..." + +MEI_ERROR meiRunArc(void) +{ + u32 arc_control_mode = 0x0; + u32 arc_debug_addr = 0x0; + u32 arc_debug_data = 0x0; + + // Switch arc control from JTAG mode to MEI mode- write '1' to bit0 + meiLongwordRead(MEI_CONTROL, &arc_control_mode); + arc_control_mode |= (HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, arc_control_mode); + + // Write arc aux reg access mask (0x0) into debug addr decode reg + meiLongwordWrite(MEI_DEBUG_DEC, MEI_DEBUG_DEC_AUX_MASK); + + // Write arc status aux reg addr (0x0) into debug read addr reg + meiLongwordWrite(MEI_DEBUG_RAD, arc_debug_addr); + meiPollForDbgDone(); + + // Read debug data reg and save content + meiLongwordRead(MEI_DEBUG_DATA, &arc_debug_data); + + // Write arc status aux reg addr (0x0) into debug write addr reg + meiLongwordWrite(MEI_DEBUG_WAD, arc_debug_addr); + + // Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared) + arc_debug_data &= ~(BIT25); + meiLongwordWrite(MEI_DEBUG_DATA, arc_debug_data); + meiPollForDbgDone(); + + // Switch arc control from MEI mode to JTAG mode- write '0' to bit0 + meiLongwordRead(MEI_CONTROL, &arc_control_mode); + arc_control_mode &= ~(HOST_MSTR); + meiLongwordWrite(MEI_CONTROL, arc_control_mode); + + // Enable mask for arc codeswap interrupts + meiMailboxInterruptsEnable(); + + // Return + return MEI_SUCCESS; + +} // end of "meiActivate(..." + +int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest) +{ + u32 size; + u32 i; + u32 *p; + + if( Page > img_hdr->count) + return -2; + + /* + ** Get program or data size, depending on "data" flag + */ + size = (data == GET_DATA) ? img_hdr->page[ Page].d_size : img_hdr->page[ Page].p_size; + + size &= BOOT_FLAG_MASK; // Clear boot bit! + if( size > MaxSize) + return -1; + + if( size == 0) + return 0; + /* + ** Get program or data offset, depending on "data" flag + */ + i = data ? img_hdr->page[ Page].d_offset : img_hdr->page[ Page].p_offset; + + /* + ** Copy data/program to buffer + */ + + i /= 4; // Adjust offset for byte-to-UINT for array operation + + p = (u32 *)img_hdr + i; + for(i = 0; i < size; i++) + Buffer[i] = *p++; + /* + ** Pass back data/program destination address + */ + *Dest = data ? img_hdr->page[Page].d_dest : img_hdr->page[Page].p_dest; + + return size; +} + +MEI_ERROR meiCMV(u16 * request, int reply) // write cmv to arc, if reply needed, wait for reply +{ + MEI_ERROR meierror; + wait_queue_t wait; + + cmv_reply=reply; + + meierror = meiMailboxWrite(request, MSG_LENGTH); + + if(meierror != MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n MailboxWrite Fail."); +#endif + return meierror; + } + else{ + cmv_count++; + } + + if(cmv_reply == NO_REPLY) + return MEI_SUCCESS; + + init_waitqueue_entry(&wait, current); + add_wait_queue(&wait_queue_arcmsgav, &wait); + set_current_state(TASK_INTERRUPTIBLE); +// cmv_waiting=1; + + if(arcmsgav==1){ + set_current_state(TASK_RUNNING); + remove_wait_queue(&wait_queue_arcmsgav, &wait); + } + else{ + schedule_timeout(CMV_TIMEOUT); + remove_wait_queue(&wait_queue_arcmsgav, &wait); + } + if(arcmsgav==0){//CMV_timeout + cmv_waiting=0; + arcmsgav=0; +#ifdef AMAZON_MEI_DEBUG_ON + printk("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n"); +#endif + return MEI_MAILBOX_TIMEOUT; + } + else{ + arcmsgav=0; + reply_count++; + return MEI_SUCCESS; + } +} + +//TODO, for loopback test +#ifdef DFE_LOOPBACK +#define mte_reg_base (0x4800*4+0x20000) + +/* Iridia Registers Address Constants */ +#define MTE_Reg(r) (int)(mte_reg_base + (r*4)) + +#define IT_AMODE MTE_Reg(0x0004) + + +#define OMBOX_BASE 0x15F80 +#define IMBOX_BASE 0x15FC0 + +#define TIMER_DELAY (1024) +#define BC0_BYTES (32) +#define BC1_BYTES (30) +#define NUM_MB (12) +#define TIMEOUT_VALUE 2000 + +void BFMWait (u32 cycle) { + u32 i; + for (i = 0 ; i< cycle ; i++); +} + +void WriteRegLong(u32 addr, u32 data){ + //printk("[%8x] <= %8x \n\n", addr, data); + *((volatile u32 *)(addr)) = data; +} + +u32 ReadRegLong (u32 addr) { + u32 rd_val; + + rd_val = *((volatile u32 *)(addr)); + //printk("[%8x] => %8x \n\n", addr, rd_val); + return rd_val; + +} + +/* This routine writes the mailbox with the data in an input array */ +void WriteMbox(u32 *mboxarray,u32 size) { + u32 i; + + WriteRegLong(MEI_XFR_ADDR,IMBOX_BASE); + for (i=0;if_dentry->d_inode)->i_ino; + char outputbuf[64]; + int count=0; + int i; + u32 version=0; + reg_entry_t* current_reg=NULL; + + for (i=0;iflag == (int *) 8){ + ///proc/mei/version + //format: + //Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl + //Firmware Date Time Code: date/month min:hour + if (*ppos>0) /* Assume reading completed in previous read*/ + return 0; // indicates end of file + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + //if (indicator_count != 1){ + if (indicator_count < 1){ + up(&mei_sema); + return -EAGAIN; + } + //major:bits 0-7 + //minor:bits 8-15 + makeCMV(H2D_CMV_READ, INFO, 54, 0, 1, NULL); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#if 0 +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n WINHOST CMV fail"); +#endif +#endif + up(&mei_sema); + return -EIO; + } + version = RxMessage[4]; + count = sprintf(outputbuf, "%d.%d.",(version)&0xff,(version>>8)&0xff); + + //sub_version:bits 4-7 + //int_version:bits 0-3 + //spl_appl:bits 8-13 + //rel_state:bits 14-15 + makeCMV(H2D_CMV_READ, INFO, 54, 1, 1, NULL); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#if 0 +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n WINHOST CMV fail"); +#endif +#endif + up(&mei_sema); + return -EFAULT; + } + version =RxMessage[4]; + count += sprintf(outputbuf+count, "%d.%d.%d.%d", + (version>>4)&0xf, + version&0xf, + (version>>14)&0x3, + (version>>8)&0x3f); +#ifdef ADSL_LED_SUPPORT +// version check -start for adsl led + if ((((version>>4)&0xf)==2)&&((version&0xf)>=3)&&((version&0xf)<7)) firmware_support_led=1; + else if ((((version>>4)&0xf)==2)&&((version&0xf)>=7)) firmware_support_led=2; + else if (((version>>4)&0xf)>2) firmware_support_led=2; + +//165001:henryhsu:20050906:Modify for adsl firmware version 1.2.1.2.0.1 DATA_LED can't flash. + //else firmware_support_led=0; + else firmware_support_led=2; +//165001 + + +// version check -end +#endif + //Date:bits 0-7 + //Month:bits 8-15 + makeCMV(H2D_CMV_READ, INFO, 55, 0, 1, NULL); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#if 0 +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n WINHOST CMV fail"); +#endif +#endif + up(&mei_sema); + return -EIO; + } + version = RxMessage[4]; + + //Hour:bits 0-7 + //Minute:bits 8-15 + makeCMV(H2D_CMV_READ, INFO, 55, 1, 1, NULL); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#if 0 +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n WINHOST CMV fail"); +#endif +#endif + up(&mei_sema); + return -EFAULT; + } + version += (RxMessage[4]<<16); + count += sprintf(outputbuf+count, " %d/%d %d:%d\n" + ,version&0xff + ,(version>>8)&0xff + ,(version>>25)&0xff + ,(version>>16)&0xff); + + up(&mei_sema); + + *ppos+=count; + }else if(current_reg->flag != (int *)Recent_indicator){ + if (*ppos>0) /* Assume reading completed in previous read*/ + return 0; // indicates end of file + count = sprintf(outputbuf, "0x%08X\n\n", *(current_reg->flag)); + *ppos+=count; + if (count>nbytes) /* Assume output can be read at one time */ + return -EINVAL; + }else{ + if((int)(*ppos)/((int)7)==16) + return 0; // indicate end of the message + count = sprintf(outputbuf, "0x%04X\n\n", *(((u16 *)(current_reg->flag))+ (int)(*ppos)/((int)7))); + *ppos+=count; + } + if (copy_to_user(buf, outputbuf, count)) + return -EFAULT; + return count; +} + +static ssize_t proc_write(struct file * file, const char * buffer, size_t count, loff_t *ppos) +{ + int i_ino = (file->f_dentry->d_inode)->i_ino; + reg_entry_t* current_reg=NULL; + int i; + unsigned long newRegValue; + char *endp; + + for (i=0;iflag == (int *)Recent_indicator)) + return -EINVAL; + + newRegValue = simple_strtoul(buffer,&endp,0); + *(current_reg->flag)=(int)newRegValue; + return (count+endp-buffer); +} +////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]/////////////////////////// +void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data) +{ + memset(TxMessage, 0, MSG_LENGTH*2); + TxMessage[0]= (opcode<<4) + (size&0xf); + TxMessage[1]= (((index==0)?0:1)<<7) + (group&0x7f); + TxMessage[2]= address; + TxMessage[3]= index; + if(opcode == H2D_CMV_WRITE) + memcpy(TxMessage+4, data, size*2); + return; +} + +////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]/////////////////////////// +void makeCMV_local(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,u16 *CMVMSG) +{ + memset(CMVMSG, 0, MSG_LENGTH*2); + CMVMSG[0]= (opcode<<4) + (size&0xf); + CMVMSG[1]= (((index==0)?0:1)<<7) + (group&0x7f); + CMVMSG[2]= address; + CMVMSG[3]= index; + if(opcode == H2D_CMV_WRITE) + memcpy(CMVMSG+4, data, size*2); + return; +} + +//////////////// Driver Structure ///////////////////////////////////////////////////////////////////////////// +static ssize_t mei_write(struct file *, const char *, size_t, loff_t *); +static int mei_ioctl(struct inode *, struct file *, unsigned int, unsigned long); + +static struct file_operations mei_operations = { + write: mei_write, + ioctl: mei_ioctl, +}; + + +static ssize_t mei_write(struct file * filp, const char * buf, size_t size, loff_t * loff) +{ +// printk("\n\n mei_write entered"); +// image_buffer = (u32 *)kmalloc(size, GFP_KERNEL); + image_buffer = (u32 *)vmalloc(size); +// printk("\n\n image_buffer kmalloc done"); + if(image_buffer == NULL){ +#ifdef AMAZON_MEI_DEBUG_ON +// printk("\n\n kmalloc for firmware image fail"); + printk("\n\n vmalloc for firmware image fail"); +#endif + return -1; + } + copy_from_user((char *)image_buffer, buf, size); +// printk("\n\n copy_from_user done"); + return size; +} + + ////////// ISR GPTU Timer 6 for high resolution timer ///////////// +void amazon_timer6_interrupt_MEI(int irq, void *dev_id, struct pt_regs *regs) +{ + int i,j; + u32 temp; + u16 temp16; + u16 rdindex, wrindex; + u16 num_rd=0; //num of byte can be read + u16 bytes_to_wr=0; + +// printk("\n\nenter timer\n\n"); + irqtimes++; +// printk("\n%d\n",irqtimes); + + +/* +#ifdef PCM_ACCESS_DEBUG + meiDebugRead_8(0x30f20, &temp, 1); +#else + meiDMARead_8(0x30f20, &temp, 1); +#endif + if((temp&0x4000)!=0){ + printk("\nER_ERR"); +#ifdef PCM_ACCESS_DEBUG + meiDebugWrite_8(0x30f20, &temp, 1); +#else + meiDMAWrite_8(0x30f20, &temp, 1); +#endif +#ifdef PCM_ACCESS_DEBUG + meiDebugRead_8(0x30f20, &temp, 1); +#else + meiDMARead_8(0x30f20, &temp, 1); +#endif + if((temp&0x4000)!=0) + printk("\nER_ERR not cleared"); + } +*/ + + for(i=PCM_CHANNEL_NUM-1;i>=0;i--){// start from last channel, which is rx +#ifdef PCM_ACCESS_DEBUG + meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); +#else + meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); +#endif + wrindex = (u16)((temp & 0xffff0000)>>16); +// printk(" %d",wrindex); +#ifdef PCM_ACCESS_DEBUG + meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1); +#else + meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1); +#endif + rdindex = (u16)(temp & 0xffff); +// printk(" %d",rdindex); + if(rdindex<=wrindex) + num_rd=((wrindex-rdindex)/4)*4; //read multiply of 4 bytes + else + num_rd=((pcm_data[i].len-(rdindex-wrindex))/4)*4; //read multiply of 4 bytes + + if(i%2!=0){//rx channel + pcm_data[i].point=0; + for(j=0;j=pcm_data[i].len) + temp16=(rdindex+j*4) - pcm_data[i].len; + else + temp16=rdindex+j*4; +#ifdef PCM_ACCESS_DEBUG + meiDebugRead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1); +#else + meiDMARead_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16, (u32*)(pcm_data[i].buff+pcm_data[i].point), 1); +#endif + // printk(" %8x", *((u32*)(pcm_data[i].buff+pcm_data[i].point))); + /* if(pcm_data[i].point==0){ + if(pcm_data[i].buff[0]==0xA5){// start of loopback data + pcm_data[i].point+=4; + printk("\nstart receive data"); + } + } + else*/ + pcm_data[i].point+=4; + /* if(pcm_data[i].point==PCM_BUFF_SIZE){ //finish rx + pcm_data[i].finish=1; + printk("\nchannel[%d] finished", i); + } */ + } + } + if(firsttime[i]==1){ + for(j=0;j=256) + pcm_start_loc[i]=pcm_start_loc[i]-256; + } + } + + rdindex +=num_rd; + if(rdindex>=pcm_data[i].len) + rdindex=rdindex-pcm_data[i].len; +#ifdef PCM_ACCESS_DEBUG + meiDebugRead_16(pcm_start_addr+i*16+8, &temp, 1); +#else + meiDMARead_16(pcm_start_addr+i*16+8, &temp, 1); +#endif + temp= (temp & 0xffff0000) + rdindex; +#ifdef PCM_ACCESS_DEBUG + meiDebugWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex +#else + meiDMAWrite_16(pcm_start_addr+i*16+8, &temp, 1); // update rdindex +#endif + + bytes_to_wr = num_rd; + + // if(bytes_to_wr>0){ + // printk(" %d", num_rd); + // printk(" %d", rdindex); +// printk("\n\nrdindex = %d", rdindex); + //} + } + else{ //tx channel + // if((bytes_to_wr + num_rd) < pcm_data[i].len){ + for(j=0;j=pcm_data[i].len) + temp16=(wrindex+j*4) - pcm_data[i].len; + else + temp16=wrindex + j*4; +/* +#ifdef PCM_ACCESS_DEBUG + meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1); +#else + meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i+1].buff+j*4), 1); +#endif*/ + +#ifdef PCM_ACCESS_DEBUG + meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1); + // meiDebugWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff), 1); +#else + meiDMAWrite_8((((u32)(pcm_data[i].LSW))+(((u32)(pcm_data[i].MSW))<<16))+temp16,(u32*)(pcm_data[i].buff+pcm_data[i].point), 1); +#endif + pcm_data[i].point+=4; + if(pcm_data[i].point==PCM_BUFF_SIZE){ + // pcm_data[i].finish=1; + // printk("\nchannel[%d] finished", i); + pcm_data[i].point=0; + } + } + } + wrindex+=bytes_to_wr; + if(wrindex>=pcm_data[i].len) + wrindex=wrindex-pcm_data[i].len; +#ifdef PCM_ACCESS_DEBUG + meiDebugRead_16(pcm_start_addr+i*16+12, &temp, 1); +#else + meiDMARead_16(pcm_start_addr+i*16+12, &temp, 1); +#endif + temp=(temp&0xffff) + (wrindex<<16); +#ifdef PCM_ACCESS_DEBUG + meiDebugWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex +#else + meiDMAWrite_16(pcm_start_addr+i*16+12, &temp, 1); // update wrindex +#endif + + //if(bytes_to_wr>0){ + // printk(" %d", bytes_to_wr); + // printk(" %d", wrindex); +// printk("\n\nwrindex = %d", wrindex); + //} + // } + } + } + return; +} +//000002:fchang Start +static int meiResetArc(void) +{ + u32 auxreg0; + u32 auxreg5; + int flshcnt=0; + int flshcnt1=0; + int flshcnt2=0; + + meiLongwordWrite(MEI_CONTROL, 1); + meiLongwordWrite(MEI_DEBUG_DEC, 3); + meiLongwordWrite(MEI_DEBUG_WAD, 0x3c); + meiLongwordWrite(MEI_DEBUG_DATA, 0x10); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_DEC, 0x0); + meiLongwordWrite(MEI_DEBUG_WAD, 0x2); + meiLongwordWrite(MEI_DEBUG_DATA, 0x0); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_WAD, 0x3); + meiLongwordWrite(MEI_DEBUG_DATA, 0x0); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_DEC, 0x0); + meiLongwordWrite(MEI_DEBUG_RAD, 0x0); + meiPollForDbgDone(); + meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); + auxreg0 = auxreg0 & 0x03ffffff; + meiLongwordWrite(MEI_DEBUG_WAD, 0x0); + meiLongwordWrite(MEI_DEBUG_DATA, auxreg0); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_WAD, 0x10a); + meiLongwordWrite(MEI_DEBUG_DATA, 0x0); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_DEC, 0x2); + meiLongwordWrite(MEI_DEBUG_WAD, 0xfffc); + meiLongwordWrite(MEI_DEBUG_DATA, 0x1fffffff); + meiPollForDbgDone(); + while(flshcnt<3){ + meiLongwordWrite(MEI_DEBUG_DEC, 0x0); + meiLongwordWrite(MEI_DEBUG_RAD, 0x0); + meiPollForDbgDone(); + meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); + auxreg0 = auxreg0 & 0xff000000; + auxreg0 = auxreg0 | 0x3fff; + meiLongwordWrite(MEI_DEBUG_WAD, 0x0); + meiLongwordWrite(MEI_DEBUG_DATA, auxreg0); + meiPollForDbgDone(); + + meiLongwordWrite(MEI_DEBUG_DEC, 0x0); + meiLongwordWrite(MEI_DEBUG_RAD, 0x5); + meiPollForDbgDone(); + meiLongwordRead(MEI_DEBUG_DATA, &auxreg5); + auxreg5 = auxreg5 | 0x801; + meiLongwordWrite(MEI_DEBUG_WAD, 0x5); + meiLongwordWrite(MEI_DEBUG_DATA, auxreg5); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_RAD, 0x0); + meiPollForDbgDone(); + meiLongwordRead(MEI_DEBUG_DATA, &auxreg0); + auxreg0 = auxreg0 & 0x00ffffff; + if(auxreg0 == 0x4000) + flshcnt = flshcnt+1; + else{ + if(flshcnt == 0) + flshcnt1 = flshcnt1 +1; + else + flshcnt2 = flshcnt2 +1; + } + } + + return 1; +} + +static int meiResetCore(void) +{ + meiLongwordWrite(MEI_CONTROL, 0x1); + meiLongwordWrite(MEI_DEBUG_DEC, 0x2); + meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10); + meiLongwordWrite(MEI_DEBUG_DATA, 0xf); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_WAD, 0x31f10); + meiLongwordWrite(MEI_DEBUG_DATA, 0x0); + meiPollForDbgDone(); + meiLongwordWrite(MEI_DEBUG_WAD, 0x31f00); + meiLongwordWrite(MEI_DEBUG_DATA, 0x55); + meiPollForDbgDone(); + return 1; +} + +static int meiEnalbeMailboxInt(void) +{ + u32 arc2meiintmsk; + meiLongwordRead(ARC_TO_MEI_INT_MASK, &arc2meiintmsk); + arc2meiintmsk = arc2meiintmsk | 0x1; + meiLongwordWrite(ARC_TO_MEI_INT_MASK, arc2meiintmsk); + meiLongwordWrite(MEI_CONTROL, 0x0); + return 1; +} + + + +//000002:fchang End + +static int mei_ioctl(struct inode * ino, struct file * fil, unsigned int command, unsigned long lon) +{ + int i,k; + u32 boot_loop; + u32 page_size; + u32 dest_addr; + u32 j; + u32 temp; + u32 temp2; + u16 trapsflag=0; + amazon_clreoc_pkt * current_clreoc; + struct timeval time_now; + struct timeval time_fini; + struct list_head * ptr; + amazon_mei_mib * mib_ptr; +// u16 buff[MSG_LENGTH]__attribute__ ((aligned(4))); + structpts pts; + int meierr=MEI_SUCCESS; + u16 data[12]; //used in makeCMV, to pass in payload when CMV set, ignored when CMV read. + meireg regrdwr; + meidebug debugrdwr; + amazon_mei_mib * temp_intvl; + struct sk_buff * eoc_skb; +// 603221:tc.chen start + u16 hdlc_cmd[2]; + u16 hdlc_rx_buffer[32]; + int hdlc_rx_len=0; +// 603221:tc.chen end + + int from_kernel = 0;//joelin + if (ino == (struct inode *)0) from_kernel = 1;//joelin + +// printk("\n switch.command = %i\n", command); + switch(command){ + case GET_ADSL_LINE_CODE: + pts.adslLineTableEntry_pt = (adslLineTableEntry *)kmalloc(sizeof(adslLineTableEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslLineTableEntry_pt, (char *)lon, sizeof(adslLineTableEntry)); + if(IS_FLAG_SET((&(pts.adslLineTableEntry_pt->flags)), LINE_CODE_FLAG)){ + pts.adslLineTableEntry_pt->adslLineCode = 2; + } + copy_to_user((char *)lon, (char *)pts.adslLineTableEntry_pt, sizeof(adslLineTableEntry)); + kfree(pts.adslLineTableEntry_pt); + break; +#ifdef AMAZON_MEI_MIB_RFC3440 + case GET_ADSL_ATUC_LINE_EXT: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry)); + if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG)){ + ATUC_LINE_TRANS_CAP_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 67 Index 0"); +#endif + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG); + } + else{ + memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucCap)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){ + ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 67 Index 0"); +#endif + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG); + } + else{ + memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG)){ + ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 2 Address 1 Index 0"); +#endif + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG); + } + else{ + memcpy((&(pts.adslLineExtTableEntry_pt->adslLineTransAtucActual)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG)){ // not supported currently +/* + LINE_GLITE_POWER_STATE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 2 Address 0 Index 0"); +#endif + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); + } + else{ + memcpy((&(pts.adslLineExtTableEntry_pt->adslLineGlitePowerState)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } +*/ + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); + } + copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry)); + kfree(pts.adslLineTableEntry_pt); + up(&mei_sema); + break; +#endif + +#ifdef AMAZON_MEI_MIB_RFC3440 + case SET_ADSL_ATUC_LINE_EXT: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + pts.adslLineExtTableEntry_pt = (adslLineExtTableEntry *)kmalloc(sizeof(adslLineExtTableEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslLineExtTableEntry_pt, (char *)lon, sizeof(adslLineExtTableEntry)); + + //only adslLineTransAtucConfig can be set. + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CAP_FLAG); + if(IS_FLAG_SET((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG)){ + memcpy(data,(&(pts.adslLineExtTableEntry_pt->adslLineTransAtucConfig)), 2); + ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 67 Index 0"); +#endif + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_CONFIG_FLAG); + } + } + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), ATUC_LINE_TRANS_ACTUAL_FLAG); + CLR_FLAG((&(pts.adslLineExtTableEntry_pt->flags)), LINE_GLITE_POWER_STATE_FLAG); + + copy_to_user((char *)lon, (char *)pts.adslLineExtTableEntry_pt, sizeof(adslLineExtTableEntry)); + kfree(pts.adslLineTableEntry_pt); + up(&mei_sema); + break; +#endif + + case GET_ADSL_ATUC_PHY: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslAtucPhysEntry_pt = (adslAtucPhysEntry *)kmalloc(sizeof(adslAtucPhysEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslAtucPhysEntry_pt, (char *)lon, sizeof(adslAtucPhysEntry)); + if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG)){ + ATUC_PHY_SER_NUM_FLAG_MAKECMV1; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 57 Index 0"); +#endif + CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG); + } + else{ + memcpy(pts.adslAtucPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + ATUC_PHY_SER_NUM_FLAG_MAKECMV2; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 57 Index 12"); +#endif + CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_SER_NUM_FLAG); + } + else{ + memcpy((pts.adslAtucPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG)){ + ATUC_PHY_VENDOR_ID_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 64 Index 0"); +#endif + CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VENDOR_ID_FLAG); + } + else{ + memcpy(pts.adslAtucPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG)){ + ATUC_PHY_VER_NUM_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 58 Index 0"); +#endif + CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_PHY_VER_NUM_FLAG); + } + else{ + memcpy(pts.adslAtucPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_STAT_FLAG)){ + pts.adslAtucPhysEntry_pt->status = CurrStatus.adslAtucCurrStatus; + } + if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG)){ + ATUC_CURR_OUT_PWR_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 68 Index 5"); +#endif + CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_OUT_PWR_FLAG); + } + else{ + memcpy((&(pts.adslAtucPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG)){ + ATUC_CURR_ATTR_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 69 Index 0"); +#endif + CLR_FLAG((&(pts.adslAtucPhysEntry_pt->flags)), ATUC_CURR_ATTR_FLAG); + } + else{ + memcpy((&(pts.adslAtucPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + copy_to_user((char *)lon, (char *)pts.adslAtucPhysEntry_pt, sizeof(adslAtucPhysEntry)); + kfree(pts.adslAtucPhysEntry_pt); + + up(&mei_sema); + break; + case GET_ADSL_ATUR_PHY: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslAturPhysEntry_pt = (adslAturPhysEntry *)kmalloc(sizeof(adslAturPhysEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslAturPhysEntry_pt, (char *)lon, sizeof(adslAturPhysEntry)); + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG)){ + ATUR_PHY_SER_NUM_FLAG_MAKECMV1; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 62 Index 0"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG); + } + else{ + memcpy(pts.adslAturPhysEntry_pt->serial_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + ATUR_PHY_SER_NUM_FLAG_MAKECMV2; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 62 Index 12"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_SER_NUM_FLAG); + } + else{ + memcpy((pts.adslAturPhysEntry_pt->serial_no+24), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG)){ + ATUR_PHY_VENDOR_ID_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 65 Index 0"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VENDOR_ID_FLAG); + } + else{ + memcpy(pts.adslAturPhysEntry_pt->vendor_id.vendor_id, RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG)){ + ATUR_PHY_VER_NUM_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 61 Index 0"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_PHY_VER_NUM_FLAG); + } + else{ + memcpy(pts.adslAturPhysEntry_pt->version_no, RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG)){ + ATUR_SNRMGN_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 68 Index 4"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_SNRMGN_FLAG); + } + else{ + memcpy((&(pts.adslAturPhysEntry_pt->SnrMgn)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG)){ + ATUR_ATTN_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 68 Index 2"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_ATTN_FLAG); + } + else{ + memcpy((&(pts.adslAturPhysEntry_pt->Attn)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_STAT_FLAG)){ + pts.adslAturPhysEntry_pt->status = CurrStatus.adslAturCurrStatus; + } + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG)){ + ATUR_CURR_OUT_PWR_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 69 Index 5"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_OUT_PWR_FLAG); + } + else{ + memcpy((&(pts.adslAturPhysEntry_pt->outputPwr)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + if(IS_FLAG_SET((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG)){ + ATUR_CURR_ATTR_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 68 Index 0"); +#endif + CLR_FLAG((&(pts.adslAturPhysEntry_pt->flags)), ATUR_CURR_ATTR_FLAG); + } + else{ + memcpy((&(pts.adslAturPhysEntry_pt->attainableRate)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + copy_to_user((char *)lon, (char *)pts.adslAturPhysEntry_pt, sizeof(adslAturPhysEntry)); + kfree(pts.adslAturPhysEntry_pt); + + up(&mei_sema); + break; + case GET_ADSL_ATUC_CHAN_INFO: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslAtucChanInfo_pt = (adslAtucChanInfo *)kmalloc(sizeof(adslAtucChanInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAtucChanInfo_pt, (char *)lon, sizeof(adslAtucChanInfo)); + if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG)){ + if((chantype.interleave!=1) || (chantype.fast==1)){ + CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG); + } + else{ + ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 3 Index 1"); +#endif + CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_INTLV_DELAY_FLAG); + } + else{ + memcpy((&(pts.adslAtucChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + } + if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG)){ + ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 1 Index 0"); +#endif + CLR_FLAG((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_CURR_TX_RATE_FLAG); + } + else{ + pts.adslAtucChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + } + if(IS_FLAG_SET((&(pts.adslAtucChanInfo_pt->flags)), ATUC_CHAN_PREV_TX_RATE_FLAG)){ + pts.adslAtucChanInfo_pt->prevTxRate = PrevTxRate.adslAtucChanPrevTxRate; + } + copy_to_user((char *)lon, (char *)pts.adslAtucChanInfo_pt, sizeof(adslAtucChanInfo)); + kfree(pts.adslAtucChanInfo_pt); + + up(&mei_sema); + break; + case GET_ADSL_ATUR_CHAN_INFO: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslAturChanInfo_pt = (adslAturChanInfo *)kmalloc(sizeof(adslAturChanInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAturChanInfo_pt, (char *)lon, sizeof(adslAturChanInfo)); + if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG)){ + if((chantype.interleave!=1) || (chantype.fast==1)){ + CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG); + } + else{ + ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 2 Index 1"); +#endif + CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_INTLV_DELAY_FLAG); + } + else{ + memcpy((&(pts.adslAturChanInfo_pt->interleaveDelay)), RxMessage+4, ((RxMessage[0]&0xf)*2)); + } + } + } + if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG)){ + ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 0 Index 0"); +#endif + CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CURR_TX_RATE_FLAG); + } + else{ + pts.adslAturChanInfo_pt->currTxRate = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + } + if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_PREV_TX_RATE_FLAG)){ + pts.adslAturChanInfo_pt->prevTxRate = PrevTxRate.adslAturChanPrevTxRate; + } + if(IS_FLAG_SET((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG)){ + // ? no CMV to update this + CLR_FLAG((&(pts.adslAturChanInfo_pt->flags)), ATUR_CHAN_CRC_BLK_LEN_FLAG); + } + copy_to_user((char *)lon, (char *)pts.adslAturChanInfo_pt, sizeof(adslAturChanInfo)); + kfree(pts.adslAturChanInfo_pt); + + up(&mei_sema); + break; + case GET_ADSL_ATUC_PERF_DATA: + pts.atucPerfDataEntry_pt = (atucPerfDataEntry *)kmalloc(sizeof(atucPerfDataEntry), GFP_KERNEL); + copy_from_user((char *)pts.atucPerfDataEntry_pt, (char *)lon, sizeof(atucPerfDataEntry)); + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOFS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfLofs=ATUC_PERF_LOFS; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_LOSS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfLoss=ATUC_PERF_LOSS; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_ESS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfESs=ATUC_PERF_ESS; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INITS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfInits=ATUC_PERF_INITS; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_VALID_INTVLS_FLAG)){ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==96) + break; + } + pts.atucPerfDataEntry_pt->adslAtucPerfValidIntervals=i; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_INVALID_INTVLS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfInvalidIntervals=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ + do_gettimeofday(&time_now); + pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOFS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLofs=current_intvl->AtucPerfLof; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_LOSS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinLoss=current_intvl->AtucPerfLos; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_ESS_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinESs=current_intvl->AtucPerfEs; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_15MIN_INIT_FLAG)){ + pts.atucPerfDataEntry_pt->adslAtucPerfCurr15MinInits=current_intvl->AtucPerfInit; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i+=900; + } + do_gettimeofday(&time_now); + i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; + if(i>=86400) + pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i-86400; + else + pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayTimeElapsed=i; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOFS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfLof; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfLof; + pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLofs=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_LOSS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfLos; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfLos; + pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayLoss=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_ESS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfEs; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfEs; + pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayESs=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_CURR_1DAY_INIT_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfInit; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfInit; + pts.atucPerfDataEntry_pt->adslAtucPerfCurr1DayInits=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_MON_SEC_FLAG)){ + i=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + i++; + } + if(i>=96) + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=86400; + else + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayMoniSecs=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOFS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfLof; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=j; + else + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLofs=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_LOSS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfLos; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=j; + else + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayLoss=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_ESS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfEs; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=j; + else + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayESs=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataEntry_pt->flags)), ATUC_PERF_PREV_1DAY_INITS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfInit; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=j; + else + pts.atucPerfDataEntry_pt->adslAtucPerfPrev1DayInits=0; + } + + copy_to_user((char *)lon, (char *)pts.atucPerfDataEntry_pt, sizeof(atucPerfDataEntry)); + kfree(pts.atucPerfDataEntry_pt); + break; +#ifdef AMAZON_MEI_MIB_RFC3440 + case GET_ADSL_ATUC_PERF_DATA_EXT: //??? CMV mapping not available + pts.atucPerfDataExtEntry_pt = (atucPerfDataExtEntry *)kmalloc(sizeof(atucPerfDataExtEntry), GFP_KERNEL); + copy_from_user((char *)pts.atucPerfDataExtEntry_pt, (char *)lon, sizeof(atucPerfDataExtEntry)); + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FASTR_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFastR=ATUC_PERF_STAT_FASTR; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_FAILED_FASTR_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfStatFailedFastR=ATUC_PERF_STAT_FAILED_FASTR; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_SESL_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfStatSesL=ATUC_PERF_STAT_SESL; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_STAT_UASL_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfStatUasL=ATUC_PERF_STAT_UASL; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FASTR_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFastR=current_intvl->AtucPerfStatFastR; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinFailedFastR=current_intvl->AtucPerfStatFailedFastR; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_SESL_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinSesL=current_intvl->AtucPerfStatSesL; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_15MIN_UASL_FLAG)){ + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr15MinUasL=current_intvl->AtucPerfStatUasL; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FASTR_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatFastR; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfStatFastR; + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFastR=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatFailedFastR; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfStatFailedFastR; + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayFailedFastR=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_SESL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatSesL; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfStatSesL; + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DaySesL=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_CURR_1DAY_UASL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatUasL; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AtucPerfStatUasL; + pts.atucPerfDataExtEntry_pt->adslAtucPerfCurr1DayUasL=j; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FASTR_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatFastR; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=j; + else + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFastR=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatFailedFastR; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=j; + else + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayFailedFastR=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_SESL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatSesL; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=j; + else + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DaySesL=0; + } + if(IS_FLAG_SET((&(pts.atucPerfDataExtEntry_pt->flags)), ATUC_PERF_PREV_1DAY_UASL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AtucPerfStatUasL; + i++; + if(i==96) + break; + } + if(i==96) + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=j; + else + pts.atucPerfDataExtEntry_pt->adslAtucPerfPrev1DayUasL=0; + } + copy_to_user((char *)lon, (char *)pts.atucPerfDataExtEntry_pt, sizeof(atucPerfDataExtEntry)); + kfree(pts.atucPerfDataExtEntry_pt); + break; +#endif + case GET_ADSL_ATUR_PERF_DATA: + pts.aturPerfDataEntry_pt = (aturPerfDataEntry *)kmalloc(sizeof(aturPerfDataEntry), GFP_KERNEL); + copy_from_user((char *)pts.aturPerfDataEntry_pt, (char *)lon, sizeof(aturPerfDataEntry)); + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOFS_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfLofs=ATUR_PERF_LOFS; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LOSS_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfLoss=ATUR_PERF_LOSS; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_LPR_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfLprs=ATUR_PERF_LPR; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_ESS_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfESs=ATUR_PERF_ESS; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_VALID_INTVLS_FLAG)){ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==96) + break; + } + pts.aturPerfDataEntry_pt->adslAturPerfValidIntervals=i; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_INVALID_INTVLS_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfInvalidIntervals=0; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ + do_gettimeofday(&time_now); + pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOFS_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLofs=current_intvl->AturPerfLof; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LOSS_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLoss=current_intvl->AturPerfLos; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_LPR_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinLprs=current_intvl->AturPerfLpr; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_15MIN_ESS_FLAG)){ + pts.aturPerfDataEntry_pt->adslAturPerfCurr15MinESs=current_intvl->AturPerfEs; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i+=900; + } + do_gettimeofday(&time_now); + i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; + if(i>=86400) + pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i-86400; + else + pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayTimeElapsed=i; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOFS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfLof; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturPerfLof; + pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLofs=j; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LOSS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfLos; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturPerfLos; + pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLoss=j; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_LPR_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfLpr; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturPerfLpr; + pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayLprs=j; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_CURR_1DAY_ESS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfEs; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturPerfEs; + pts.aturPerfDataEntry_pt->adslAturPerfCurr1DayESs=j; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_MON_SEC_FLAG)){ + i=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + i++; + } + if(i>=96) + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=86400; + else + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayMoniSecs=0; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOFS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfLof; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=j; + else + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLofs=0; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LOSS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfLos; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=j; + else + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLoss=0; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_LPR_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfLpr; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=j; + else + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayLprs=0; + } + if(IS_FLAG_SET((&(pts.aturPerfDataEntry_pt->flags)), ATUR_PERF_PREV_1DAY_ESS_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfEs; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=j; + else + pts.aturPerfDataEntry_pt->adslAturPerfPrev1DayESs=0; + } + + copy_to_user((char *)lon, (char *)pts.aturPerfDataEntry_pt, sizeof(aturPerfDataEntry)); + kfree(pts.aturPerfDataEntry_pt); + break; +#ifdef AMAZON_MEI_MIB_RFC3440 + case GET_ADSL_ATUR_PERF_DATA_EXT: + pts.aturPerfDataExtEntry_pt = (aturPerfDataExtEntry *)kmalloc(sizeof(aturPerfDataExtEntry), GFP_KERNEL); + copy_from_user((char *)pts.aturPerfDataExtEntry_pt, (char *)lon, sizeof(aturPerfDataExtEntry)); + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_SESL_FLAG)){ + pts.aturPerfDataExtEntry_pt->adslAturPerfStatSesL=ATUR_PERF_STAT_SESL; + } + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_STAT_UASL_FLAG)){ + pts.aturPerfDataExtEntry_pt->adslAturPerfStatUasL=ATUR_PERF_STAT_UASL; + } + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_SESL_FLAG)){ + pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinSesL=current_intvl->AturPerfStatSesL; + } + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_15MIN_UASL_FLAG)){ + pts.aturPerfDataExtEntry_pt->adslAturPerfCurr15MinUasL=current_intvl->AturPerfStatUasL; + } + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_SESL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfStatSesL; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturPerfStatSesL; + pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DaySesL=j; + } + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_CURR_1DAY_UASL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfStatUasL; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturPerfStatUasL; + pts.aturPerfDataExtEntry_pt->adslAturPerfCurr1DayUasL=j; + } + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_SESL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfStatSesL; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=j; + else + pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DaySesL=0; + } + if(IS_FLAG_SET((&(pts.aturPerfDataExtEntry_pt->flags)), ATUR_PERF_PREV_1DAY_UASL_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturPerfStatUasL; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=j; + else + pts.aturPerfDataExtEntry_pt->adslAturPerfPrev1DayUasL=0; + } + copy_to_user((char *)lon, (char *)pts.aturPerfDataExtEntry_pt, sizeof(aturPerfDataExtEntry)); + kfree(pts.aturPerfDataExtEntry_pt); + break; +#endif + case GET_ADSL_ATUC_INTVL_INFO: + pts.adslAtucIntvlInfo_pt = (adslAtucIntvlInfo *)kmalloc(sizeof(adslAtucIntvlInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAtucIntvlInfo_pt, (char *)lon, sizeof(adslAtucIntvlInfo)); + + if(pts.adslAtucIntvlInfo_pt->IntervalNumber <1){ + pts.adslAtucIntvlInfo_pt->intervalLOF = ATUC_PERF_LOFS; + pts.adslAtucIntvlInfo_pt->intervalLOS = ATUC_PERF_LOSS; + pts.adslAtucIntvlInfo_pt->intervalES = ATUC_PERF_ESS; + pts.adslAtucIntvlInfo_pt->intervalInits = ATUC_PERF_INITS; + pts.adslAtucIntvlInfo_pt->intervalValidData = 1; + } + else{ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==pts.adslAtucIntvlInfo_pt->IntervalNumber){ + temp_intvl = list_entry(ptr, amazon_mei_mib, list); + pts.adslAtucIntvlInfo_pt->intervalLOF = temp_intvl->AtucPerfLof; + pts.adslAtucIntvlInfo_pt->intervalLOS = temp_intvl->AtucPerfLos; + pts.adslAtucIntvlInfo_pt->intervalES = temp_intvl->AtucPerfEs; + pts.adslAtucIntvlInfo_pt->intervalInits = temp_intvl->AtucPerfInit; + pts.adslAtucIntvlInfo_pt->intervalValidData = 1; + break; + } + } + if(ptr==&interval_list){ + pts.adslAtucIntvlInfo_pt->intervalValidData = 0; + pts.adslAtucIntvlInfo_pt->flags = 0; + pts.adslAtucIntvlInfo_pt->intervalLOF = 0; + pts.adslAtucIntvlInfo_pt->intervalLOS = 0; + pts.adslAtucIntvlInfo_pt->intervalES = 0; + pts.adslAtucIntvlInfo_pt->intervalInits = 0; + } + } + + copy_to_user((char *)lon, (char *)pts.adslAtucIntvlInfo_pt, sizeof(adslAtucIntvlInfo)); + kfree(pts.adslAtucIntvlInfo_pt); + break; +#ifdef AMAZON_MEI_MIB_RFC3440 + case GET_ADSL_ATUC_INTVL_EXT_INFO: + pts.adslAtucInvtlExtInfo_pt = (adslAtucInvtlExtInfo *)kmalloc(sizeof(adslAtucInvtlExtInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAtucInvtlExtInfo_pt, (char *)lon, sizeof(adslAtucInvtlExtInfo)); + if(pts.adslAtucInvtlExtInfo_pt->IntervalNumber <1){ + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = ATUC_PERF_STAT_FASTR; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = ATUC_PERF_STAT_FAILED_FASTR; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = ATUC_PERF_STAT_SESL; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = ATUC_PERF_STAT_UASL; +// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1; + } + else{ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==pts.adslAtucInvtlExtInfo_pt->IntervalNumber){ + temp_intvl = list_entry(ptr, amazon_mei_mib, list); + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = temp_intvl->AtucPerfStatFastR; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = temp_intvl->AtucPerfStatFailedFastR; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = temp_intvl->AtucPerfStatSesL; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = temp_intvl->AtucPerfStatUasL; +// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 1; + break; + } + } + if(ptr==&interval_list){ +// pts.adslAtucInvtlExtInfo_pt->intervalValidData = 0; + pts.adslAtucInvtlExtInfo_pt->flags = 0; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFastR = 0; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalFailedFastR = 0; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalSesL = 0; + pts.adslAtucInvtlExtInfo_pt->adslAtucIntervalUasL = 0; + } + } + copy_to_user((char *)lon, (char *)pts.adslAtucInvtlExtInfo_pt, sizeof(adslAtucInvtlExtInfo)); + kfree(pts.adslAtucInvtlExtInfo_pt); + break; +#endif + case GET_ADSL_ATUR_INTVL_INFO: + pts.adslAturIntvlInfo_pt = (adslAturIntvlInfo *)kmalloc(sizeof(adslAturIntvlInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAturIntvlInfo_pt, (char *)lon, sizeof(adslAturIntvlInfo)); + + if(pts.adslAturIntvlInfo_pt->IntervalNumber <1){ + pts.adslAturIntvlInfo_pt->intervalLOF = ATUR_PERF_LOFS; + pts.adslAturIntvlInfo_pt->intervalLOS = ATUR_PERF_LOSS; + pts.adslAturIntvlInfo_pt->intervalES = ATUR_PERF_ESS; + pts.adslAturIntvlInfo_pt->intervalLPR = ATUR_PERF_LPR; + pts.adslAturIntvlInfo_pt->intervalValidData = 1; + } + else{ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==pts.adslAturIntvlInfo_pt->IntervalNumber){ + temp_intvl = list_entry(ptr, amazon_mei_mib, list); + pts.adslAturIntvlInfo_pt->intervalLOF = temp_intvl->AturPerfLof; + pts.adslAturIntvlInfo_pt->intervalLOS = temp_intvl->AturPerfLos; + pts.adslAturIntvlInfo_pt->intervalES = temp_intvl->AturPerfEs; + pts.adslAturIntvlInfo_pt->intervalLPR = temp_intvl->AturPerfLpr; + pts.adslAturIntvlInfo_pt->intervalValidData = 1; + break; + } + } + if(ptr==&interval_list){ + pts.adslAturIntvlInfo_pt->intervalValidData = 0; + pts.adslAturIntvlInfo_pt->flags = 0; + pts.adslAturIntvlInfo_pt->intervalLOF = 0; + pts.adslAturIntvlInfo_pt->intervalLOS = 0; + pts.adslAturIntvlInfo_pt->intervalES = 0; + pts.adslAturIntvlInfo_pt->intervalLPR = 0; + } + } + + copy_to_user((char *)lon, (char *)pts.adslAturIntvlInfo_pt, sizeof(adslAturIntvlInfo)); + kfree(pts.adslAturIntvlInfo_pt); + break; +#ifdef AMAZON_MEI_MIB_RFC3440 + case GET_ADSL_ATUR_INTVL_EXT_INFO: + pts.adslAturInvtlExtInfo_pt = (adslAturInvtlExtInfo *)kmalloc(sizeof(adslAturInvtlExtInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAturInvtlExtInfo_pt, (char *)lon, sizeof(adslAturInvtlExtInfo)); + + if(pts.adslAturInvtlExtInfo_pt->IntervalNumber <1){ + pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = ATUR_PERF_STAT_SESL; + pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = ATUR_PERF_STAT_UASL; +// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1; + } + else{ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==pts.adslAturInvtlExtInfo_pt->IntervalNumber){ + temp_intvl = list_entry(ptr, amazon_mei_mib, list); + pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = temp_intvl->AturPerfStatSesL; + pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = temp_intvl->AturPerfStatUasL; +// pts.adslAturInvtlExtInfo_pt->intervalValidData = 1; + break; + } + } + if(ptr==&interval_list){ +// pts.adslAturInvtlExtInfo_pt->intervalValidData = 0; + pts.adslAturInvtlExtInfo_pt->flags = 0; + pts.adslAturInvtlExtInfo_pt->adslAturIntervalSesL = 0; + pts.adslAturInvtlExtInfo_pt->adslAturIntervalUasL = 0; + } + } + + copy_to_user((char *)lon, (char *)pts.adslAturInvtlExtInfo_pt, sizeof(adslAturInvtlExtInfo)); + kfree(pts.adslAturInvtlExtInfo_pt); + break; +#endif + case GET_ADSL_ATUC_CHAN_PERF_DATA: + pts.atucChannelPerfDataEntry_pt = (atucChannelPerfDataEntry *)kmalloc(sizeof(atucChannelPerfDataEntry), GFP_KERNEL); + copy_from_user((char *)pts.atucChannelPerfDataEntry_pt, (char *)lon, sizeof(atucChannelPerfDataEntry)); + + pts.atucChannelPerfDataEntry_pt->flags = 0; + + copy_to_user((char *)lon, (char *)pts.atucChannelPerfDataEntry_pt, sizeof(atucChannelPerfDataEntry)); + kfree(pts.atucChannelPerfDataEntry_pt); + break; + case GET_ADSL_ATUR_CHAN_PERF_DATA: + pts.aturChannelPerfDataEntry_pt = (aturChannelPerfDataEntry *)kmalloc(sizeof(aturChannelPerfDataEntry), GFP_KERNEL); + copy_from_user((char *)pts.aturChannelPerfDataEntry_pt, (char *)lon, sizeof(aturChannelPerfDataEntry)); + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_RECV_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanReceivedBlks=ATUR_CHAN_RECV_BLK; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_TX_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanTransmittedBlks=ATUR_CHAN_TX_BLK; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_CORR_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanCorrectedBlks=ATUR_CHAN_CORR_BLK; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_UNCORR_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanUncorrectBlks=ATUR_CHAN_UNCORR_BLK; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_VALID_INTVL_FLAG)){ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==96) + break; + } + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfValidIntervals=i; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_INVALID_INTVL_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfInvalidIntervals=0; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG)){ + do_gettimeofday(&time_now); + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTimeElapsed=time_now.tv_sec - (current_intvl->start_time).tv_sec; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinReceivedBlks=current_intvl->AturChanPerfRxBlk; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinTransmittedBlks=current_intvl->AturChanPerfTxBlk; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinCorrectedBlks=current_intvl->AturChanPerfCorrBlk; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG)){ + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr15MinUncorrectBlks=current_intvl->AturChanPerfUncorrBlk; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG)){ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i+=900; + } + do_gettimeofday(&time_now); + i+=time_now.tv_sec - (current_intvl->start_time).tv_sec; + if(i>=86400) + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i-86400; + else + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTimeElapsed=i; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfRxBlk; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturChanPerfRxBlk; + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayReceivedBlks=j; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfTxBlk; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturChanPerfTxBlk; + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayTransmittedBlks=j; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfCorrBlk; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturChanPerfCorrBlk; + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayCorrectedBlks=j; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfUncorrBlk; + i++; + if(i==96) + j=0; + } + j+=current_intvl->AturChanPerfUncorrBlk; + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfCurr1DayUncorrectBlks=j; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG)){ + i=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + i++; + } + if(i>=96) + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=86400; + else + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayMoniSecs=0; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfRxBlk; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=j; + else + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayReceivedBlks=0; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfTxBlk; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=j; + else + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayTransmittedBlks=0; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfCorrBlk; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=j; + else + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayCorrectedBlks=0; + } + if(IS_FLAG_SET((&(pts.aturChannelPerfDataEntry_pt->flags)), ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG)){ + i=0; + j=0; + for(ptr=interval_list.next; ptr!=&(current_intvl->list); ptr=ptr->next){ + mib_ptr = list_entry(ptr, amazon_mei_mib, list); + j+=mib_ptr->AturChanPerfUncorrBlk; + i++; + if(i==96) + break; + } + if(i==96) + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=j; + else + pts.aturChannelPerfDataEntry_pt->adslAturChanPerfPrev1DayUncorrectBlks=0; + } + + copy_to_user((char *)lon, (char *)pts.aturChannelPerfDataEntry_pt, sizeof(aturChannelPerfDataEntry)); + kfree(pts.aturChannelPerfDataEntry_pt); + break; + case GET_ADSL_ATUC_CHAN_INTVL_INFO: + pts.adslAtucChanIntvlInfo_pt = (adslAtucChanIntvlInfo *)kmalloc(sizeof(adslAtucChanIntvlInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAtucChanIntvlInfo_pt, (char *)lon, sizeof(adslAtucChanIntvlInfo)); + + pts.adslAtucChanIntvlInfo_pt->flags = 0; + + copy_to_user((char *)lon, (char *)pts.adslAtucChanIntvlInfo_pt, sizeof(adslAtucChanIntvlInfo)); + kfree(pts.adslAtucChanIntvlInfo_pt); + break; + case GET_ADSL_ATUR_CHAN_INTVL_INFO: + pts.adslAturChanIntvlInfo_pt = (adslAturChanIntvlInfo *)kmalloc(sizeof(adslAturChanIntvlInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslAturChanIntvlInfo_pt, (char *)lon, sizeof(adslAturChanIntvlInfo)); + + if(pts.adslAturChanIntvlInfo_pt->IntervalNumber <1){ + pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = ATUR_CHAN_RECV_BLK; + pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = ATUR_CHAN_TX_BLK; + pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = ATUR_CHAN_CORR_BLK; + pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = ATUR_CHAN_UNCORR_BLK; + pts.adslAturChanIntvlInfo_pt->intervalValidData = 1; + } + else{ + i=0; + for(ptr=(current_intvl->list).prev; ptr!=&interval_list; ptr=ptr->prev){ + i++; + if(i==pts.adslAturChanIntvlInfo_pt->IntervalNumber){ + temp_intvl = list_entry(ptr, amazon_mei_mib, list); + pts.adslAturChanIntvlInfo_pt->chanIntervalRecvdBlks = temp_intvl->AturChanPerfRxBlk; + pts.adslAturChanIntvlInfo_pt->chanIntervalXmitBlks = temp_intvl->AturChanPerfTxBlk; + pts.adslAturChanIntvlInfo_pt->chanIntervalCorrectedBlks = temp_intvl->AturChanPerfCorrBlk; + pts.adslAturChanIntvlInfo_pt->chanIntervalUncorrectBlks = temp_intvl->AturChanPerfUncorrBlk; + pts.adslAturChanIntvlInfo_pt->intervalValidData = 1; + break; + } + } + if(ptr==&interval_list){ + pts.adslAturChanIntvlInfo_pt->intervalValidData = 0; + pts.adslAturChanIntvlInfo_pt->flags = 0; + } + } + + copy_to_user((char *)lon, (char *)pts.adslAturChanIntvlInfo_pt, sizeof(adslAturChanIntvlInfo)); + kfree(pts.adslAturChanIntvlInfo_pt); + break; + case GET_ADSL_ALRM_CONF_PROF: + pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry)); + + strncpy(pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, AlarmConfProfile.adslLineAlarmConfProfileName, 32); + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs=AlarmConfProfile.adslAtucThresh15MinLofs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss=AlarmConfProfile.adslAtucThresh15MinLoss; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs=AlarmConfProfile.adslAtucThresh15MinESs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp=AlarmConfProfile.adslAtucThreshFastRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp=AlarmConfProfile.adslAtucThreshInterleaveRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown=AlarmConfProfile.adslAtucThreshFastRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown=AlarmConfProfile.adslAtucThreshInterleaveRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable=AlarmConfProfile.adslAtucInitFailureTrapEnable; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs=AlarmConfProfile.adslAturThresh15MinLofs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss=AlarmConfProfile.adslAturThresh15MinLoss; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs=AlarmConfProfile.adslAturThresh15MinLprs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs=AlarmConfProfile.adslAturThresh15MinESs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp=AlarmConfProfile.adslAturThreshFastRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp=AlarmConfProfile.adslAturThreshInterleaveRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown=AlarmConfProfile.adslAturThreshFastRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown=AlarmConfProfile.adslAturThreshInterleaveRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){ + pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus=AlarmConfProfile.adslLineAlarmConfProfileRowStatus; + } + copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry)); + kfree(pts.adslLineAlarmConfProfileEntry_pt); + break; +#ifdef AMAZON_MEI_MIB_RFC3440 + case GET_ADSL_ALRM_CONF_PROF_EXT: + pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry)); + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){ + pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){ + pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL=AlarmConfProfileExt.adslAtucThreshold15MinSesL; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){ + pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL=AlarmConfProfileExt.adslAtucThreshold15MinUasL; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){ + pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL=AlarmConfProfileExt.adslAturThreshold15MinSesL; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){ + pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL=AlarmConfProfileExt.adslAturThreshold15MinUasL; + } + copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry)); + kfree(pts.adslLineAlarmConfProfileExtEntry_pt); + break; +#endif + case SET_ADSL_ALRM_CONF_PROF: + pts.adslLineAlarmConfProfileEntry_pt = (adslLineAlarmConfProfileEntry *)kmalloc(sizeof(adslLineAlarmConfProfileEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslLineAlarmConfProfileEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileEntry)); + + strncpy(AlarmConfProfile.adslLineAlarmConfProfileName, pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileName, 32); + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOFS_FLAG)){ + AlarmConfProfile.adslAtucThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLofs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_LOSS_FLAG)){ + AlarmConfProfile.adslAtucThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinLoss; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_15MIN_ESS_FLAG)){ + AlarmConfProfile.adslAtucThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThresh15MinESs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEUP_FLAG)){ + AlarmConfProfile.adslAtucThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEUP_FLAG)){ + AlarmConfProfile.adslAtucThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_FAST_RATEDOWN_FLAG)){ + AlarmConfProfile.adslAtucThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshFastRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ + AlarmConfProfile.adslAtucThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAtucThreshInterleaveRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG)){ + AlarmConfProfile.adslAtucInitFailureTrapEnable=pts.adslLineAlarmConfProfileEntry_pt->adslAtucInitFailureTrapEnable; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOFS_FLAG)){ + AlarmConfProfile.adslAturThresh15MinLofs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLofs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LOSS_FLAG)){ + AlarmConfProfile.adslAturThresh15MinLoss=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLoss; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_LPRS_FLAG)){ + AlarmConfProfile.adslAturThresh15MinLprs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinLprs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_15MIN_ESS_FLAG)){ + AlarmConfProfile.adslAturThresh15MinESs=pts.adslLineAlarmConfProfileEntry_pt->adslAturThresh15MinESs; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEUP_FLAG)){ + AlarmConfProfile.adslAturThreshFastRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEUP_FLAG)){ + AlarmConfProfile.adslAturThreshInterleaveRateUp=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateUp; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_FAST_RATEDOWN_FLAG)){ + AlarmConfProfile.adslAturThreshFastRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshFastRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG)){ + AlarmConfProfile.adslAturThreshInterleaveRateDown=pts.adslLineAlarmConfProfileEntry_pt->adslAturThreshInterleaveRateDown; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileEntry_pt->flags)), LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG)){ + AlarmConfProfile.adslLineAlarmConfProfileRowStatus=pts.adslLineAlarmConfProfileEntry_pt->adslLineAlarmConfProfileRowStatus; + } + copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileEntry_pt, sizeof(adslLineAlarmConfProfileEntry)); + kfree(pts.adslLineAlarmConfProfileEntry_pt); + break; + +#ifdef AMAZON_MEI_MIB_RFC3440 + case SET_ADSL_ALRM_CONF_PROF_EXT: + pts.adslLineAlarmConfProfileExtEntry_pt = (adslLineAlarmConfProfileExtEntry *)kmalloc(sizeof(adslLineAlarmConfProfileExtEntry), GFP_KERNEL); + copy_from_user((char *)pts.adslLineAlarmConfProfileExtEntry_pt, (char *)lon, sizeof(adslLineAlarmConfProfileExtEntry)); + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_FAILED_FASTR_FLAG)){ + AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinFailedFastR; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_SESL_FLAG)){ + AlarmConfProfileExt.adslAtucThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinSesL; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUC_THRESH_15MIN_UASL_FLAG)){ + AlarmConfProfileExt.adslAtucThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAtucThreshold15MinUasL; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_SESL_FLAG)){ + AlarmConfProfileExt.adslAturThreshold15MinSesL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinSesL; + } + if(IS_FLAG_SET((&(pts.adslLineAlarmConfProfileExtEntry_pt->flags)), ATUR_THRESH_15MIN_UASL_FLAG)){ + AlarmConfProfileExt.adslAturThreshold15MinUasL=pts.adslLineAlarmConfProfileExtEntry_pt->adslAturThreshold15MinUasL; + } + copy_to_user((char *)lon, (char *)pts.adslLineAlarmConfProfileExtEntry_pt, sizeof(adslLineAlarmConfProfileExtEntry)); + kfree(pts.adslLineAlarmConfProfileExtEntry_pt); + break; +#endif + + case ADSL_ATUR_TRAPS: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + trapsflag=0; + if(AlarmConfProfile.adslAtucThresh15MinLofs!=0 && current_intvl->AtucPerfLof>=AlarmConfProfile.adslAtucThresh15MinLofs) + trapsflag|=ATUC_PERF_LOFS_THRESH_FLAG; + if(AlarmConfProfile.adslAtucThresh15MinLoss!=0 && current_intvl->AtucPerfLos>=AlarmConfProfile.adslAtucThresh15MinLoss) + trapsflag|=ATUC_PERF_LOSS_THRESH_FLAG; + if(AlarmConfProfile.adslAtucThresh15MinESs!=0 && current_intvl->AtucPerfEs>=AlarmConfProfile.adslAtucThresh15MinESs) + trapsflag|=ATUC_PERF_ESS_THRESH_FLAG; + if(chantype.fast==1){ + if(AlarmConfProfile.adslAtucThreshFastRateUp!=0 || AlarmConfProfile.adslAtucThreshFastRateDown!=0){ + ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 1 Index 0"); +#endif + } + else{ + temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + if((AlarmConfProfile.adslAtucThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshFastRateUp)){ + trapsflag|=ATUC_RATE_CHANGE_FLAG; + PrevTxRate.adslAtucChanPrevTxRate = temp; + } + if((AlarmConfProfile.adslAtucThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshFastRateDown)){ + trapsflag|=ATUC_RATE_CHANGE_FLAG; + PrevTxRate.adslAtucChanPrevTxRate = temp; + } + } + } + } + if(chantype.interleave==1){ + if(AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0){ + ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 1 Index 0"); +#endif + } + else{ + temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + if((AlarmConfProfile.adslAtucThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAtucChanPrevTxRate+AlarmConfProfile.adslAtucThreshInterleaveRateUp)){ + trapsflag|=ATUC_RATE_CHANGE_FLAG; + PrevTxRate.adslAtucChanPrevTxRate = temp; + } + if((AlarmConfProfile.adslAtucThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAtucChanPrevTxRate-AlarmConfProfile.adslAtucThreshInterleaveRateDown)){ + trapsflag|=ATUC_RATE_CHANGE_FLAG; + PrevTxRate.adslAtucChanPrevTxRate = temp; + } + } + } + } + if(AlarmConfProfile.adslAturThresh15MinLofs!=0 && current_intvl->AturPerfLof>=AlarmConfProfile.adslAturThresh15MinLofs) + trapsflag|=ATUR_PERF_LOFS_THRESH_FLAG; + if(AlarmConfProfile.adslAturThresh15MinLoss!=0 && current_intvl->AturPerfLos>=AlarmConfProfile.adslAturThresh15MinLoss) + trapsflag|=ATUR_PERF_LOSS_THRESH_FLAG; + if(AlarmConfProfile.adslAturThresh15MinLprs!=0 && current_intvl->AturPerfLpr>=AlarmConfProfile.adslAturThresh15MinLprs) + trapsflag|=ATUR_PERF_LPRS_THRESH_FLAG; + if(AlarmConfProfile.adslAturThresh15MinESs!=0 && current_intvl->AturPerfEs>=AlarmConfProfile.adslAturThresh15MinESs) + trapsflag|=ATUR_PERF_ESS_THRESH_FLAG; + if(chantype.fast==1){ + if(AlarmConfProfile.adslAturThreshFastRateUp!=0 || AlarmConfProfile.adslAturThreshFastRateDown!=0){ + ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 0 Index 0"); +#endif + } + else{ + temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + if((AlarmConfProfile.adslAturThreshFastRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshFastRateUp)){ + trapsflag|=ATUR_RATE_CHANGE_FLAG; + PrevTxRate.adslAturChanPrevTxRate = temp; + } + if((AlarmConfProfile.adslAturThreshFastRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshFastRateDown)){ + trapsflag|=ATUR_RATE_CHANGE_FLAG; + PrevTxRate.adslAturChanPrevTxRate = temp; + } + } + } + } + if(chantype.interleave==1){ + if(AlarmConfProfile.adslAturThreshInterleaveRateUp!=0 || AlarmConfProfile.adslAturThreshInterleaveRateDown!=0){ + ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 6 Address 0 Index 0"); +#endif + } + else{ + temp = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + if((AlarmConfProfile.adslAturThreshInterleaveRateUp!=0) && (temp>=PrevTxRate.adslAturChanPrevTxRate+AlarmConfProfile.adslAturThreshInterleaveRateUp)){ + trapsflag|=ATUR_RATE_CHANGE_FLAG; + PrevTxRate.adslAturChanPrevTxRate = temp; + } + if((AlarmConfProfile.adslAturThreshInterleaveRateDown!=0) && (temp<=PrevTxRate.adslAturChanPrevTxRate-AlarmConfProfile.adslAturThreshInterleaveRateDown)){ + trapsflag|=ATUR_RATE_CHANGE_FLAG; + PrevTxRate.adslAturChanPrevTxRate = temp; + } + } + } + } + copy_to_user((char *)lon, (char *)(&trapsflag), 2); + + up(&mei_sema); + break; + +#ifdef AMAZON_MEI_MIB_RFC3440 + case ADSL_ATUR_EXT_TRAPS: + trapsflag=0; + if(AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR!=0 && current_intvl->AtucPerfStatFailedFastR>=AlarmConfProfileExt.adslAtucThreshold15MinFailedFastR) + trapsflag|=ATUC_15MIN_FAILED_FASTR_TRAP_FLAG; + if(AlarmConfProfileExt.adslAtucThreshold15MinSesL!=0 && current_intvl->AtucPerfStatSesL>=AlarmConfProfileExt.adslAtucThreshold15MinSesL) + trapsflag|=ATUC_15MIN_SESL_TRAP_FLAG; + if(AlarmConfProfileExt.adslAtucThreshold15MinUasL!=0 && current_intvl->AtucPerfStatUasL>=AlarmConfProfileExt.adslAtucThreshold15MinUasL) + trapsflag|=ATUC_15MIN_UASL_TRAP_FLAG; + if(AlarmConfProfileExt.adslAturThreshold15MinSesL!=0 && current_intvl->AturPerfStatSesL>=AlarmConfProfileExt.adslAturThreshold15MinSesL) + trapsflag|=ATUR_15MIN_SESL_TRAP_FLAG; + if(AlarmConfProfileExt.adslAturThreshold15MinUasL!=0 && current_intvl->AturPerfStatUasL>=AlarmConfProfileExt.adslAturThreshold15MinUasL) + trapsflag|=ATUR_15MIN_UASL_TRAP_FLAG; + copy_to_user((char *)lon, (char *)(&trapsflag), 2); + break; +#endif + +// 603221:tc.chen start + case GET_ADSL_LINE_STATUS: + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslLineStatusInfo_pt = (adslLineStatusInfo *)kmalloc(sizeof(adslLineStatusInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslLineStatusInfo_pt, (char *)lon, sizeof(adslLineStatusInfo)); + + if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODEM_STATUS_FLAG)){ + LINE_STAT_MODEM_STATUS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group STAT Address 0 Index 0"); +#endif + pts.adslLineStatusInfo_pt->adslModemStatus = 0; + } + else{ + pts.adslLineStatusInfo_pt->adslModemStatus = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_MODE_SEL_FLAG)){ + LINE_STAT_MODE_SEL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group STAT Address 1 Index 0"); +#endif + pts.adslLineStatusInfo_pt->adslModeSelected = 0; + } + else{ + pts.adslLineStatusInfo_pt->adslModeSelected = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_TRELLCOD_ENABLE_FLAG)){ + LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group OPTN Address 2 Index 0"); +#endif + pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = 0; + } + else{ + + pts.adslLineStatusInfo_pt->adslTrellisCodeEnable = (RxMessage[4]>>13)&0x1==0x1?0:1; + } + } + + if(IS_FLAG_SET((&(pts.adslLineStatusInfo_pt->flags)), LINE_STAT_LATENCY_FLAG)){ + LINE_STAT_LATENCY_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group STAT Address 12 Index 0"); +#endif + pts.adslLineStatusInfo_pt->adslLatency = 0; + } + else{ + pts.adslLineStatusInfo_pt->adslLatency = RxMessage[4]; + } + } + + copy_to_user((char *)lon, (char *)pts.adslLineStatusInfo_pt, sizeof(adslLineStatusInfo)); + kfree(pts.adslLineStatusInfo_pt); + + up(&mei_sema); + break; + + + case GET_ADSL_LINE_RATE: + if (showtime!=1) + return -ERESTARTSYS; + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslLineRateInfo_pt = (adslLineRateInfo *)kmalloc(sizeof(adslLineRateInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslLineRateInfo_pt, (char *)lon, sizeof(adslLineRateInfo)); + + if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEDS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode + { + if (chantype.interleave) + LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV; + else + LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV; + + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group RATE Address 1 Index 0"); +#endif + pts.adslLineRateInfo_pt->adslDataRateds = 0; + } + else{ + pts.adslLineRateInfo_pt->adslDataRateds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + }else // adsl 2/2+ + { + unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain; + Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0; + //// up stream data rate + + if (chantype.interleave) + { + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 25 Index 0"); +#endif + Lp = 0; + }else + Lp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 23 Index 0"); +#endif + Rp = 0; + }else + Rp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 24 Index 0"); +#endif + Mp = 0; + }else + Mp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 26 Index 0"); +#endif + Tp = 0; + }else + Tp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 28 Index 0"); +#endif + Kp = 0; + }else + { + Kp=RxMessage[4]+ RxMessage[5]+1; + Bpn=RxMessage[4]+ RxMessage[5]; + } + }else + { + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 25 Index 1"); +#endif + Lp = 0; + }else + Lp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 23 Index 1"); +#endif + Rp = 0; + }else + Rp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 24 Index 1"); +#endif + Mp = 0; + }else + Mp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 26 Index 1"); +#endif + Tp = 0; + }else + Tp=RxMessage[4]; + + LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 28 Index 2"); +#endif + Kp = 0; + }else + { + Kp=RxMessage[4]+ RxMessage[5]+1; + Bpn=RxMessage[4]+ RxMessage[5]; + } + } + DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp)); + //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp)); + //pts.adslLineRateInfo_pt->adslDataRateds = DataRate * 1000 + DataRate_remain; + pts.adslLineRateInfo_pt->adslDataRateds = DataRate; + } + } + + if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_DATA_RATEUS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode + { + if (chantype.interleave) + LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV; + else + LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV; + + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ + #ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group RATE Address 0 Index 0"); + #endif + pts.adslLineRateInfo_pt->adslDataRateus = 0; + } + else{ + pts.adslLineRateInfo_pt->adslDataRateus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + }else // adsl 2/2+ + { + unsigned long Mp,Lp,Tp,Rp,Kp,Bpn,DataRate,DataRate_remain; + Mp=Lp=Tp=Rp=Kp=Bpn=DataRate=DataRate_remain=0; + //// down stream data rate + + if (chantype.interleave) + { + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 14 Index 0"); +#endif + Lp = 0; + }else + Lp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 12 Index 0"); +#endif + Rp = 0; + }else + Rp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 13 Index 0"); +#endif + Mp = 0; + }else + Mp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 15 Index 0"); +#endif + Tp = 0; + }else + Tp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 17 Index 0"); +#endif + Kp = 0; + }else + { + Kp=RxMessage[4]+ RxMessage[5]+1; + Bpn=RxMessage[4]+ RxMessage[5]; + } + }else + { + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 14 Index 1"); +#endif + Lp = 0; + }else + Lp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 12 Index 1"); +#endif + Rp = 0; + }else + Rp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 13 Index 1"); +#endif + Mp = 0; + }else + Mp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 15 Index 1"); +#endif + Tp = 0; + }else + Tp=RxMessage[4]; + + LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 17 Index 2"); +#endif + Kp = 0; + }else + { + Kp=RxMessage[4]+ RxMessage[5]+1; + Bpn=RxMessage[4]+ RxMessage[5]; + } + } + DataRate=((Tp*(Bpn+1)-1)*Mp*Lp*4)/(Tp*(Kp*Mp+Rp)); + //DataRate_remain=((((Tp*(Bpn+1)-1)*Mp*Lp*4)%(Tp*(Kp*Mp+Rp)))*1000)/(Tp*(Kp*Mp+Rp)); + //pts.adslLineRateInfo_pt->adslDataRateus = DataRate * 1000 + DataRate_remain; + pts.adslLineRateInfo_pt->adslDataRateus = DataRate; + } + } + + if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRDS_FLAG)){ + LINE_RATE_ATTNDRDS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 68 Index 4"); +#endif + pts.adslLineRateInfo_pt->adslATTNDRds = 0; + } + else{ + pts.adslLineRateInfo_pt->adslATTNDRds = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + } + + if(IS_FLAG_SET((&(pts.adslLineRateInfo_pt->flags)), LINE_RATE_ATTNDRUS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode + { + LINE_RATE_ATTNDRUS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ + #ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 69 Index 4"); + #endif + pts.adslLineRateInfo_pt->adslATTNDRus = 0; + } + else{ + pts.adslLineRateInfo_pt->adslATTNDRus = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + }else + { + hdlc_cmd[0]=0x0181; + hdlc_cmd[1]=0x24; + up(&mei_sema); + if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + hdlc_rx_len=0; + hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); + if (hdlc_rx_len <=0) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_RATE_END; + } + pts.adslLineRateInfo_pt->adslATTNDRus = (u32)le16_to_cpu(hdlc_rx_buffer[1])<<16 | (u32)le16_to_cpu(hdlc_rx_buffer[2]); + } + if(down_interruptible(&mei_sema)) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_RATE_END; + } + } + } + copy_to_user((char *)lon, (char *)pts.adslLineRateInfo_pt, sizeof(adslLineRateInfo)); + up(&mei_sema); + +GET_ADSL_LINE_RATE_END: + kfree(pts.adslLineRateInfo_pt); + break; + + case GET_ADSL_LINE_INFO: + if (showtime!=1) + return -ERESTARTSYS; + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslLineInfo_pt = (adslLineInfo *)kmalloc(sizeof(adslLineInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslLineInfo_pt, (char *)lon, sizeof(adslLineInfo)); + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHDS_FLAG)){ + if (chantype.interleave) + LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV; + else + LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV; + + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 27 Index 0"); +#endif + pts.adslLineInfo_pt->adslInterleaveDepthds = 0; + } + else{ + pts.adslLineInfo_pt->adslInterleaveDepthds = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_INTLV_DEPTHUS_FLAG)){ + if (chantype.interleave) + LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV; + else + LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV; + + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group CNFG Address 16 Index 0"); +#endif + pts.adslLineInfo_pt->adslInterleaveDepthus = 0; + } + else{ + pts.adslLineInfo_pt->adslInterleaveDepthus = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNDS_FLAG)){ + LINE_INFO_LATNDS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 68 Index 1"); +#endif + pts.adslLineInfo_pt->adslLATNds = 0; + } + else{ + pts.adslLineInfo_pt->adslLATNds = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_LATNUS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode + { + LINE_INFO_LATNUS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 69 Index 1"); +#endif + pts.adslLineInfo_pt->adslLATNus = 0; + } + else{ + pts.adslLineInfo_pt->adslLATNus = RxMessage[4]; + } + }else + { + hdlc_cmd[0]=0x0181; + hdlc_cmd[1]=0x21; + up(&mei_sema); + if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + hdlc_rx_len=0; + hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); + if (hdlc_rx_len <=0) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + pts.adslLineInfo_pt->adslLATNus = le16_to_cpu(hdlc_rx_buffer[1]); + } + if(down_interruptible(&mei_sema)) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNDS_FLAG)){ + LINE_INFO_SATNDS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 68 Index 2"); +#endif + pts.adslLineInfo_pt->adslSATNds = 0; + } + else{ + pts.adslLineInfo_pt->adslSATNds = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SATNUS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode + { + LINE_INFO_SATNUS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 69 Index 2"); +#endif + pts.adslLineInfo_pt->adslSATNus = 0; + } + else{ + pts.adslLineInfo_pt->adslSATNus = RxMessage[4]; + } + }else + { + hdlc_cmd[0]=0x0181; + hdlc_cmd[1]=0x22; + up(&mei_sema); + if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + hdlc_rx_len=0; + hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); + if (hdlc_rx_len <=0) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + pts.adslLineInfo_pt->adslSATNus = le16_to_cpu(hdlc_rx_buffer[1]); + } + if(down_interruptible(&mei_sema)) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNDS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend==0) // adsl mode + { + LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV; + } + else if ((adsl_mode == 0x4000) || (adsl_mode == 0x8000) || adsl_mode_extend > 0) + { + LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV; + } + else + { + LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV; + } + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 68 Index 3"); +#endif + pts.adslLineInfo_pt->adslSNRMds = 0; + } + else{ + if (adsl_mode>8 || adsl_mode_extend>0) + { + int SNRMds,SNRMds_remain; + SNRMds=RxMessage[4]; + SNRMds_remain=((SNRMds&0xff)*1000)/256; + SNRMds=(SNRMds>>8)&0xff; + if ((SNRMds_remain%100)>=50) SNRMds_remain=(SNRMds_remain/100)+1; + else SNRMds_remain=(SNRMds_remain/100); + pts.adslLineInfo_pt->adslSNRMds = SNRMds*10 + SNRMds_remain; + }else + { + pts.adslLineInfo_pt->adslSNRMds = RxMessage[4]; + } + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_SNRMNUS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend == 0) + { + LINE_INFO_SNRMNUS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 69 Index 3"); +#endif + pts.adslLineInfo_pt->adslSNRMus = 0; + } + else{ + pts.adslLineInfo_pt->adslSNRMus = RxMessage[4]; + } + }else + { + hdlc_cmd[0]=0x0181; + hdlc_cmd[1]=0x23; + up(&mei_sema); + if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + hdlc_rx_len=0; + hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); + if (hdlc_rx_len <=0) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + pts.adslLineInfo_pt->adslSNRMus = le16_to_cpu(hdlc_rx_buffer[1]); + } + if(down_interruptible(&mei_sema)) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPDS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend == 0) + { + LINE_INFO_ACATPDS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ + #ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 68 Index 6"); + #endif + pts.adslLineInfo_pt->adslACATPds = 0; + } + else{ + pts.adslLineInfo_pt->adslACATPds = RxMessage[4]; + } + }else + { + hdlc_cmd[0]=0x0181; + hdlc_cmd[1]=0x25; + up(&mei_sema); + if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + hdlc_rx_len=0; + hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); + if (hdlc_rx_len <=0) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + pts.adslLineInfo_pt->adslACATPds = le16_to_cpu(hdlc_rx_buffer[1]); + } + if(down_interruptible(&mei_sema)) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + } + } + + if(IS_FLAG_SET((&(pts.adslLineInfo_pt->flags)), LINE_INFO_ACATPUS_FLAG)){ + if (adsl_mode <=8 && adsl_mode_extend == 0) + { + LINE_INFO_ACATPUS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 69 Index 6"); +#endif + pts.adslLineInfo_pt->adslACATPus = 0; + } + else{ + pts.adslLineInfo_pt->adslACATPus = RxMessage[4]; + } + }else + { + hdlc_cmd[0]=0x0181; + hdlc_cmd[1]=0x26; + up(&mei_sema); + if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],4)!= -EBUSY) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + hdlc_rx_len=0; + hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); + if (hdlc_rx_len <=0) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + pts.adslLineInfo_pt->adslACATPus = le16_to_cpu(hdlc_rx_buffer[1]); + } + if(down_interruptible(&mei_sema)) + { + meierr = -ERESTARTSYS; + goto GET_ADSL_LINE_INFO_END; + } + } + } + + copy_to_user((char *)lon, (char *)pts.adslLineInfo_pt, sizeof(adslLineInfo)); + up(&mei_sema); + +GET_ADSL_LINE_INFO_END: + kfree(pts.adslLineInfo_pt); + break; + + case GET_ADSL_NEAREND_STATS: + if (showtime!=1) + return -ERESTARTSYS; + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslNearEndPerfStats_pt = (adslNearEndPerfStats *)kmalloc(sizeof(adslNearEndPerfStats), GFP_KERNEL); + copy_from_user((char *)pts.adslNearEndPerfStats_pt, (char *)lon, sizeof(adslNearEndPerfStats)); + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SUPERFRAME_FLAG)){ + NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 20 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslSuperFrames = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslSuperFrames = (u32)(RxMessage[4]); + } + NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 21 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslSuperFrames = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslSuperFrames += (((u32)(RxMessage[4]))<<16); + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG) || + IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG) || + IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG) || + IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG) || + IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG) ){ + NEAREND_PERF_LOS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 0 Index 0"); +#endif + RxMessage[4] = 0; + } + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOS_FLAG)){ + if( (RxMessage[4]&0x1) == 0x1) + pts.adslNearEndPerfStats_pt->adslneLOS = 1; + else + pts.adslNearEndPerfStats_pt->adslneLOS = 0; + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOF_FLAG)){ + if( (RxMessage[4]&0x2) == 0x2) + pts.adslNearEndPerfStats_pt->adslneLOF = 1; + else + pts.adslNearEndPerfStats_pt->adslneLOF = 0; + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LPR_FLAG)){ + if( (RxMessage[4]&0x4) == 0x4) + pts.adslNearEndPerfStats_pt->adslneLPR = 1; + else + pts.adslNearEndPerfStats_pt->adslneLPR = 0; + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_NCD_FLAG)){ + pts.adslNearEndPerfStats_pt->adslneNCD = (RxMessage[4]>>4)&0x3; + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LCD_FLAG)){ + pts.adslNearEndPerfStats_pt->adslneLCD = (RxMessage[4]>>6)&0x3; + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_CRC_FLAG)){ + if (chantype.interleave) + NEAREND_PERF_CRC_FLAG_LP0_MAKECMV; + else + NEAREND_PERF_CRC_FLAG_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 2 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneCRC = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneCRC = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_RSCORR_FLAG)){ + if (chantype.interleave) + NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV; + else + NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV; + + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 3 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneRSCorr = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneRSCorr = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_FECS_FLAG)){ + NEAREND_PERF_FECS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 6 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneFECS = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneFECS = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_ES_FLAG)){ + NEAREND_PERF_ES_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 7 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneES = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneES = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_SES_FLAG)){ + NEAREND_PERF_SES_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 8 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneSES = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneSES = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_LOSS_FLAG)){ + NEAREND_PERF_LOSS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 9 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneLOSS = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneLOSS = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_UAS_FLAG)){ + NEAREND_PERF_UAS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 10 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneUAS = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneUAS = RxMessage[4]; + } + } + + if(IS_FLAG_SET((&(pts.adslNearEndPerfStats_pt->flags)), NEAREND_PERF_HECERR_FLAG)){ + if (chantype.bearchannel0) + { + NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV; + }else if (chantype.bearchannel1) + { + NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV; + } + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 11 Index 0"); +#endif + pts.adslNearEndPerfStats_pt->adslneHECErrors = 0; + } + else{ + pts.adslNearEndPerfStats_pt->adslneHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + } + + copy_to_user((char *)lon, (char *)pts.adslNearEndPerfStats_pt, sizeof(adslNearEndPerfStats)); + kfree(pts.adslNearEndPerfStats_pt); + + up(&mei_sema); + break; + + case GET_ADSL_FAREND_STATS: + + if (showtime!=1) + return -ERESTARTSYS; + + if (adsl_mode>8 || adsl_mode_extend > 0) + { + do_gettimeofday(&time_now); + if( FarendData_acquire_time.tv_sec==0 || time_now.tv_sec - FarendData_acquire_time.tv_sec>=1) + { + hdlc_cmd[0]=0x105; + + if (ifx_me_hdlc_send((unsigned char *)&hdlc_cmd[0],2)!= -EBUSY) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1); + hdlc_rx_len=0; + hdlc_rx_len = ifx_mei_hdlc_read(&hdlc_rx_buffer,32*2); + if (hdlc_rx_len <=0) + { + return -ERESTARTSYS; + } + FarendStatsData.adslfeRSCorr = ((u32)le16_to_cpu(hdlc_rx_buffer[1]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[2]); + FarendStatsData.adslfeCRC = ((u32)le16_to_cpu(hdlc_rx_buffer[3]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[4]); + FarendStatsData.adslfeFECS = ((u32)le16_to_cpu(hdlc_rx_buffer[5]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[6]); + FarendStatsData.adslfeES = ((u32)le16_to_cpu(hdlc_rx_buffer[7]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[8]); + FarendStatsData.adslfeSES = ((u32)le16_to_cpu(hdlc_rx_buffer[9]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[10]); + FarendStatsData.adslfeLOSS = ((u32)le16_to_cpu(hdlc_rx_buffer[11]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[12]); + FarendStatsData.adslfeUAS = ((u32)le16_to_cpu(hdlc_rx_buffer[13]) << 16) + (u32)le16_to_cpu(hdlc_rx_buffer[14]); + do_gettimeofday(&FarendData_acquire_time); + } + + } + } + + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + pts.adslFarEndPerfStats_pt = (adslFarEndPerfStats *)kmalloc(sizeof(adslFarEndPerfStats), GFP_KERNEL); + copy_from_user((char *)pts.adslFarEndPerfStats_pt, (char *)lon, sizeof(adslFarEndPerfStats)); + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG) || + IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG) || + IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG) || + IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG) || + IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG) ){ + FAREND_PERF_LOS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 1 Index 0"); +#endif + RxMessage[4] = 0; + } + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOS_FLAG)){ + if((RxMessage[4]&0x1) == 0x1) + pts.adslFarEndPerfStats_pt->adslfeLOS = 1; + else + pts.adslFarEndPerfStats_pt->adslfeLOS = 0; + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOF_FLAG)){ + if((RxMessage[4]&0x2) == 0x2) + pts.adslFarEndPerfStats_pt->adslfeLOF = 1; + else + pts.adslFarEndPerfStats_pt->adslfeLOF = 0; + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LPR_FLAG)){ + if((RxMessage[4]&0x4) == 0x4) + pts.adslFarEndPerfStats_pt->adslfeLPR = 1; + else + pts.adslFarEndPerfStats_pt->adslfeLPR = 0; + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_NCD_FLAG)){ + pts.adslFarEndPerfStats_pt->adslfeNCD = (RxMessage[4]>>4)&0x3; + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LCD_FLAG)){ + pts.adslFarEndPerfStats_pt->adslfeLCD = (RxMessage[4]>>6)&0x3; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_CRC_FLAG)){ + if (adsl_mode<=8 && adsl_mode_extend == 0) + { + if (chantype.interleave) + { + FAREND_PERF_CRC_FLAG_LP0_MAKECMV; + } + else + { + FAREND_PERF_CRC_FLAG_LP1_MAKECMV; + } + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 24 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeCRC = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeCRC = RxMessage[4]; + } + }else + { + pts.adslFarEndPerfStats_pt->adslfeCRC = FarendStatsData.adslfeCRC; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_RSCORR_FLAG)){ + if (adsl_mode<=8 && adsl_mode_extend == 0) + { + if (chantype.interleave) + FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV; + else + FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 28 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeRSCorr = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeRSCorr = RxMessage[4]; + + } + } + else + { + pts.adslFarEndPerfStats_pt->adslfeRSCorr = FarendStatsData.adslfeRSCorr; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_FECS_FLAG)){ + if (adsl_mode<=8 && adsl_mode_extend == 0) + { + FAREND_PERF_FECS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 32 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeFECS = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeFECS = RxMessage[4]; + } + }else { + pts.adslFarEndPerfStats_pt->adslfeFECS = FarendStatsData.adslfeFECS; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_ES_FLAG)){ + if (adsl_mode<=8 && adsl_mode_extend == 0) + { + FAREND_PERF_ES_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 33 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeES = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeES = RxMessage[4]; + } + }else + { + pts.adslFarEndPerfStats_pt->adslfeES = FarendStatsData.adslfeES; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_SES_FLAG)){ + if (adsl_mode<=8 && adsl_mode_extend == 0) + { + FAREND_PERF_SES_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 34 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeSES = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeSES = RxMessage[4]; + + } + }else + { + pts.adslFarEndPerfStats_pt->adslfeSES = FarendStatsData.adslfeSES; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_LOSS_FLAG)){ + if (adsl_mode<=8 && adsl_mode_extend == 0) + { + FAREND_PERF_LOSS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeLOSS = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeLOSS = RxMessage[4]; + + } + }else + { + pts.adslFarEndPerfStats_pt->adslfeLOSS = FarendStatsData.adslfeLOSS; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_UAS_FLAG)){ + if (adsl_mode<=8 && adsl_mode_extend == 0) + { + FAREND_PERF_UAS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 36 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeUAS = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeUAS = RxMessage[4]; + + } + }else + { + pts.adslFarEndPerfStats_pt->adslfeUAS = FarendStatsData.adslfeUAS; + } + } + + if(IS_FLAG_SET((&(pts.adslFarEndPerfStats_pt->flags)), FAREND_PERF_HECERR_FLAG)){ + if (chantype.bearchannel0) + { + FAREND_PERF_HECERR_FLAG_BC0_MAKECMV; + }else if (chantype.bearchannel1) + { + FAREND_PERF_HECERR_FLAG_BC1_MAKECMV; + } + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 37 Index 0"); +#endif + pts.adslFarEndPerfStats_pt->adslfeHECErrors = 0; + } + else{ + pts.adslFarEndPerfStats_pt->adslfeHECErrors = (u32)(RxMessage[4]) + (((u32)(RxMessage[5]))<<16); + } + } + + copy_to_user((char *)lon, (char *)pts.adslFarEndPerfStats_pt, sizeof(adslFarEndPerfStats)); + kfree(pts.adslFarEndPerfStats_pt); + + up(&mei_sema); + + break; +// 603221:tc.chen end + case GET_ADSL_LOOP_DIAGNOSTICS_MODE: + //lon = loop_diagnostics_mode; + copy_to_user((char *)lon, (char *)&loop_diagnostics_mode, sizeof(int)); + break; +//>> SHC + case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE: + copy_to_user((char *)lon, (char *)&loop_diagnostics_completed, sizeof(int)); + break; + +//<< end SHC + case LOOP_DIAGNOSTIC_MODE_COMPLETE: + loop_diagnostics_completed = 1; + // read adsl mode + makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group STAT Address 1 Index 0"); +#endif + } + adsl_mode = RxMessage[4]; + + makeCMV(H2D_CMV_READ, STAT, 17, 0, 1, data); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group STAT Address 1 Index 0"); +#endif + } + adsl_mode_extend = RxMessage[4]; + wake_up_interruptible(&wait_queue_loop_diagnostic); + break; + case SET_ADSL_LOOP_DIAGNOSTICS_MODE: + if (lon != loop_diagnostics_mode) + { + loop_diagnostics_completed = 0; + loop_diagnostics_mode = lon; + + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_REBOOT, NULL); + + } + break; + case GET_ADSL_ATUR_SUBCARRIER_STATS: + if (loop_diagnostics_completed == 0) + { + interruptible_sleep_on_timeout(&wait_queue_loop_diagnostic,300*HZ); + if (loop_diagnostics_completed==0) + { + return -ERESTARTSYS; + } + } + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + pts.adslATURSubcarrierInfo_pt = (adslATURSubcarrierInfo *)kmalloc(sizeof(adslATURSubcarrierInfo), GFP_KERNEL); + copy_from_user((char *)pts.adslATURSubcarrierInfo_pt, (char *)lon, sizeof(adslATURSubcarrierInfo)); + + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINSC)){ + FAREND_HLINSC_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + pts.adslATURSubcarrierInfo_pt->HLINSCds = 0; + } + else{ + pts.adslATURSubcarrierInfo_pt->HLINSCds = RxMessage[4]; + + } + } + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLINPS)){ + int index=0,size=12; + //printk("FAREND_HLINPS\n"); + for (index=0;index<1024;index+=size) + { + if (index+size>=1024) + size = 1024-index; + FAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + } + else{ + memcpy(&pts.adslATURSubcarrierInfo_pt->HLINpsds[index],&RxMessage[4],size*2); +#if 0 + int msg_idx; + for(msg_idx=0;msg_idxflags)), FAREND_HLOGMT)){ + FAREND_HLOGMT_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + pts.adslATURSubcarrierInfo_pt->HLOGMTds = 0; + } + else{ + pts.adslATURSubcarrierInfo_pt->HLOGMTds = RxMessage[4]; + + } + } + + ///////////////////////////////////////////////////////////////////////// + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_HLOGPS)){ + //printk("FAREND_HLOGPS\n"); + int index=0,size=12; + for (index=0;index<256;index+=size) + { + if (index+size>=256) + size = 256-index; + + FAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + } + else{ + if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode + { + memcpy(&pts.adslATURSubcarrierInfo_pt->HLOGpsds[index],&RxMessage[4],size*2); + }else + { + int msg_idx=0; + for (msg_idx=0;msg_idxHLOGpsds[(index+msg_idx)*2+1] = RxMessage[4+msg_idx]; + //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); + } + } + } + } + if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode + { + pts.adslATURSubcarrierInfo_pt->HLOGpsds[0] = pts.adslATURSubcarrierInfo_pt->HLOGpsds[1]; + for (index=1;index<256;index++) + { + pts.adslATURSubcarrierInfo_pt->HLOGpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->HLOGpsds[(index)*2+1] +1) >>1; + } + } + } + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNMT)){ + FAREND_QLNMT_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + pts.adslATURSubcarrierInfo_pt->QLNMTds = 0; + } + else{ + pts.adslATURSubcarrierInfo_pt->QLNMTds = RxMessage[4]; + } + } + + ///////////////////////////////////////////////////////////////////////// + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_QLNPS)){ + int index=0,size=12; + //printk("FAREND_QLNPS\n"); + for (index=0;index<128;index+=size) + { + if (index+size>=128) + size = 128-index; + FAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + } + else{ + int msg_idx=0; + for (msg_idx=0;msg_idxQLNpsds[index],&RxMessage[4],size*2); + if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode + { + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); + }else + { + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF); + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); + //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); + } + } + + + } + } + if (adsl_mode >= 0x4000 || adsl_mode_extend >0)//adsl2+ mode + { + pts.adslATURSubcarrierInfo_pt->QLNpsds[0] = pts.adslATURSubcarrierInfo_pt->QLNpsds[1]; + for (index=1;index<256;index++) + { + pts.adslATURSubcarrierInfo_pt->QLNpsds[index*2] = (pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2-1] + pts.adslATURSubcarrierInfo_pt->QLNpsds[(index)*2+1]) >>1; + } + } + } + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRMT)){ + FAREND_SNRMT_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + pts.adslATURSubcarrierInfo_pt->SNRMTds = 0; + } + else{ + pts.adslATURSubcarrierInfo_pt->SNRMTds = RxMessage[4]; + } + } + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_SNRPS)){ + int index=0,size=12; + //printk("FAREND_SNRPS\n"); + for (index=0;index<512;index+=size) + { + if (index+size>=512) + size = 512-index; + FAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + } + else{ + //memcpy(&pts.adslATURSubcarrierInfo_pt->SNRpsds[index],&RxMessage[4],size*2); + int msg_idx=0; + for (msg_idx=0;msg_idxSNRpsds[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF); + //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); + } + + } + } + } + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_BITPS)){ + int index=0,size=12; + //printk("FAREND_BITPS\n"); + for (index=0;index<256;index+=size) + { + if (index+size>=256) + size = 256-index; + FAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + } + else{ + int msg_idx=0; + for (msg_idx=0;msg_idxBITpsds[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); + pts.adslATURSubcarrierInfo_pt->BITpsds[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); + //printk("index:%d ,cmv_result: %04X, %d\n",index+msg_idx,RxMessage[4+msg_idx],RxMessage[4+msg_idx]); + + } + + } + } + } + if(IS_FLAG_SET((&(pts.adslATURSubcarrierInfo_pt->flags)), FAREND_GAINPS)){ + int index=0,size=12; + //printk("FAREND_GAINPS\n"); + for (index=0;index<512;index+=size) + { + FAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + } + else{ + /* + int msg_idx=0; + for (msg_idx=0;msg_idxGAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF; + pts.adslATURSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF; + + } + */ + memcpy(&pts.adslATURSubcarrierInfo_pt->GAINpsds[index],&RxMessage[4],size*2); +#if 0 + int msg_idx=0; + for (msg_idx=0;msg_idxflags)), NEAREND_HLINSC)){ + NEAREND_HLINSC_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 71 Index 2"); +#endif + pts.adslATUCSubcarrierInfo_pt->HLINSCus = 0; + } + else{ + pts.adslATUCSubcarrierInfo_pt->HLINSCus = RxMessage[4]; + + } + } + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLINPS)){ + int index=0,size=12; + //printk("NEAREND_HLINPS\n"); + for (index=0;index<128;index+=size) + { + if (index+size>=128) + size = 128-index; + NEAREND_HLINPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 73 Index 0"); +#endif + } + else{ + memcpy(&pts.adslATUCSubcarrierInfo_pt->HLINpsus[index],&RxMessage[4],size*2); +#if 0 + int msg_idx; + for (msg_idx=0;msg_idxflags)), NEAREND_HLOGMT)){ + NEAREND_HLOGMT_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 80 Index 0"); +#endif + pts.adslATUCSubcarrierInfo_pt->HLOGMTus = 0; + } + else{ + pts.adslATUCSubcarrierInfo_pt->HLOGMTus = RxMessage[4]; + + } + } + + ///////////////////////////////////////////////////////////////////////// + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_HLOGPS)){ + int index=0,size=12; + //printk("NEAREND_HLOGPS\n"); + for (index=0;index<64;index+=size) + { + if (index+size>=64) + size = 64-index; + NEAREND_HLOGPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 75 Index 0"); +#endif + } + else{ +#if 0 + if (adsl_mode <0x4000)//adsl /adsl2 mode + { +#endif + memcpy(&pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index],&RxMessage[4],size*2); +#if 0 + }else + { + int msg_idx=0; + for (msg_idx=0;msg_idxHLOGpsus[(index+msg_idx)*2+1] = RxMessage[4+msg_idx]; + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index+msg_idx)] = RxMessage[4+msg_idx]; + } + } +#endif + } + } +#if 0 + if (adsl_mode >= 0x4000)//adsl2 mode + { + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[0] = pts.adslATUCSubcarrierInfo_pt->HLOGpsus[1]; + for (index=1;index<64;index++) + { + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->HLOGpsus[(index)*2+1]) >>1; + } + } +#endif + } + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNMT)){ + NEAREND_QLNMT_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 80 Index 1"); +#endif + pts.adslATUCSubcarrierInfo_pt->QLNMTus = 0; + } + else{ + pts.adslATUCSubcarrierInfo_pt->QLNMTus = RxMessage[4]; + } + } + + ///////////////////////////////////////////////////////////////////////// + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_QLNPS)){ + int index=0,size=12; + //printk("NEAREND_QLNPS\n"); + for (index=0;index<32;index+=size) + { + if (index+size>=32) + size = 32-index; + NEAREND_QLNPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 77 Index 0"); +#endif + } + else{ + int msg_idx=0; + for (msg_idx=0;msg_idxQLNpsds[index],&RxMessage[4],size*2); + if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M + if (adsl_mode < 0x4000 && adsl_mode_extend==0)//adsl2 mode + { + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+1] = (u16)(RxMessage[4+msg_idx]&0xFF); + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*4+3] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); + }else +#endif + { + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); + //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); + } + } + + + } + } +#if 0 + //if (adsl_mode <0x4000)//Annex I/J/L/M + if (adsl_mode == 0x200 || adsl_mode == 0x800 || adsl_mode ==0x2000 || adsl_mode ==0x4000 || (adsl_mode == 0 && (adsl_mode_extend == 0x4 || adsl_mode_extend == 0x2))//ADSL 2 Annex B(0x200)/J(0x800)/M(0x2000) //ADSL 2+ B,J,M + { + pts.adslATUCSubcarrierInfo_pt->QLNpsus[0] = pts.adslATUCSubcarrierInfo_pt->QLNpsus[1]; + for (index=1;index<64;index++) + { + pts.adslATUCSubcarrierInfo_pt->QLNpsus[index*2] = (pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2-1] + pts.adslATUCSubcarrierInfo_pt->QLNpsus[(index)*2+1]) >>1; + } + } +#endif + } + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRMT)){ + NEAREND_SNRMT_MAKECMV(H2D_CMV_READ); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 80 Index 2"); +#endif + pts.adslATUCSubcarrierInfo_pt->SNRMTus = 0; + } + else{ + pts.adslATUCSubcarrierInfo_pt->SNRMTus = RxMessage[4]; + } + } + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_SNRPS)){ + int index=0,size=12; + //printk("NEAREND_SNRPS\n"); + for (index=0;index<64;index+=size) + { + if (index+size>=64) + size = 64-index; + NEAREND_SNRPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 78 Index 0"); +#endif + } + else{ + //memcpy(&pts.adslATUCSubcarrierInfo_pt->SNRpsus[index],&RxMessage[4],size*2); + int msg_idx=0; + for (msg_idx=0;msg_idxSNRpsus[index+msg_idx] = (u16)(RxMessage[4+msg_idx]&0xFF); + //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); + } + + } + } + } + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_BITPS)){ + int index=0,size=12; + //printk("NEAREND_BITPS\n"); + for (index=0;index<32;index+=size) + { + if (index+size>=32) + size = 32-index; + NEAREND_BITPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 22 Index 0"); +#endif + } + else{ + int msg_idx=0; + for (msg_idx=0;msg_idxBITpsus[(index+msg_idx)*2] = (u16)(RxMessage[4+msg_idx]&0xFF); + pts.adslATUCSubcarrierInfo_pt->BITpsus[(index+msg_idx)*2+1] = (u16)((RxMessage[4+msg_idx]>>8)&0xFF); + //printk("index:%d ,cmv_result: %04X\n",index+msg_idx,RxMessage[4+msg_idx]); + } + + } + } + } + if(IS_FLAG_SET((&(pts.adslATUCSubcarrierInfo_pt->flags)), NEAREND_GAINPS)){ + int index=0,size=12; + //printk("NEAREND_GAINPS\n"); + for (index=0;index<64;index+=size) + { + if (index+size>=64) + size = 64-index; + NEAREND_GAINPS_MAKECMV(H2D_CMV_READ,index,size); + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group INFO Address 24 Index 0"); +#endif + } + else{ + /* + int msg_idx=0; + for (msg_idx=0;msg_idxGAINpsds[(index+msg_idx)*2] = RxMessage[4+msg_idx]&0xFF; + pts.adslATUCSubcarrierInfo_pt->GAINpsds[(index+msg_idx)*2+1] = (RxMessage[4+msg_idx]>>8)&0xFF; + + } + */ + memcpy(&pts.adslATUCSubcarrierInfo_pt->GAINpsus[index],&RxMessage[4],size*2); +#if 0 + int msg_idx; + for (msg_idx=0;msg_idxACTPSDus = ((int )(j*256 - temp*10*256 + k*10)) /256; + } + // DS + i=0; + j=temp=temp2=0; + NOMPSD_DS_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + i=-1; + } + else{ + j=RxMessage[4]; + } + PCB_DS_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + i=-1; + } + else{ + temp=RxMessage[4]; + } + RMSGI_DS_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group PLAM Address 35 Index 0"); +#endif + i=-1; + } + else{ + //temp2=RxMessage[4]; + k=(int16_t)RxMessage[4]; + } + if (i==0) + { + pts.adslPowerSpectralDensity_pt->ACTPSDds = ((int )(j*256 - temp*10*256 + k*10)) /256; + } + copy_to_user((char *)lon, (char *)pts.adslPowerSpectralDensity_pt, sizeof(adslPowerSpectralDensity)); + kfree(pts.adslPowerSpectralDensity_pt); + up(&mei_sema); + break; + case AMAZON_MEI_START: + showtime=0; + loop_diagnostics_completed = 0; +#ifdef ARC_READY_ACK +#ifdef LOCK_RETRY + i=0; +lock_retry: + if(down_trylock(&mei_sema)!=0) + { + reboot_lock = 1; + printk("lock fail\n"); + i++; + if (i <=5) + { + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(10); + goto lock_retry; + }else + { + printk("Force to Reboot ADSL!\n"); + up(&mei_sema); + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(1000); + sema_init(&mei_sema, 1); // semaphore initialization, mutex + } + }else + { + reboot_lock = 1; + } +#else + if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready + { + return -ERESTARTSYS; + } +#endif +#endif + //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON + if(chantype.interleave==1){ + kfree(interleave_mei_net.priv); + unregister_netdev(&interleave_mei_net); + } + else if(chantype.fast==1){ + kfree(fast_mei_net.priv); + unregister_netdev(&fast_mei_net); + } + chantype.interleave=0; + chantype.fast=0; + meiMailboxInterruptsDisable(); //disable all MEI interrupts + if(mei_arc_swap_buff == NULL){ + mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL); + if(mei_arc_swap_buff==NULL){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n malloc fail for codeswap buff"); +#endif + meierr=MEI_FAILURE; + } + } + if(meiForceRebootAdslModem() != MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n meiForceRebootAdslModem() error..."); +#endif + meierr=MEI_FAILURE; + } + interruptible_sleep_on(&wait_queue_codeswap); + // reset is called + break; + case AMAZON_MEI_MIB_DAEMON: +#ifdef IFX_SMALL_FOOTPRINT /* [ */ + return -1; +#else /* ][ !IFX_SMALL_FOOTPRINT */ + i=0; + while(1){ + if(istart_time.tv_sec>=900){ + if(current_intvl->list.next!=&interval_list){ + current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); + do_gettimeofday(&(current_intvl->start_time)); + } + else{ + mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list); + list_del(interval_list.next); + memset(mib_ptr, 0, sizeof(amazon_mei_mib)); + list_add_tail(&(mib_ptr->list), &interval_list); + if(current_intvl->list.next==&interval_list) +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nlink list error"); +#endif + current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); + do_gettimeofday(&(current_intvl->start_time)); + } + } + + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; +/* + ATUC_PERF_LO_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 0 Index 0"); +#endif + } + else{ + if(RxMessage[4]&PLAM_LOS_FailureBit){ + current_intvl->AtucPerfLos++; + ATUC_PERF_LOSS++; + CurrStatus.adslAtucCurrStatus = 2; + } + if(RxMessage[4]&PLAM_LOF_FailureBit){ + current_intvl->AtucPerfLof++; + ATUC_PERF_LOFS++; + CurrStatus.adslAtucCurrStatus = 1; + } + if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit))) + CurrStatus.adslAtucCurrStatus = 0; + } +*/ + ATUC_PERF_ESS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 7 Index 0"); +#endif + } + else{ + temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS; + if(temp>=0){ + current_intvl->AtucPerfEs+=temp; + ATUC_PERF_ESS+=temp; + mib_pread.ATUC_PERF_ESS = RxMessage[4]; + } + else{ + current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; + ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; + mib_pread.ATUC_PERF_ESS = RxMessage[4]; + } + } +/* + ATUR_PERF_LO_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 1 Index 0"); +#endif + } + else{ + if(RxMessage[4]&PLAM_LOS_FailureBit){ + current_intvl->AturPerfLos++; + ATUR_PERF_LOSS++; + CurrStatus.adslAturCurrStatus = 2; + } + if(RxMessage[4]&PLAM_LOF_FailureBit){ + current_intvl->AturPerfLof++; + ATUR_PERF_LOFS++; + CurrStatus.adslAturCurrStatus = 1; + } + if(RxMessage[4]&PLAM_LPR_FailureBit){ + current_intvl->AturPerfLpr++; + ATUR_PERF_LPR++; + CurrStatus.adslAturCurrStatus = 3; + } + if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit))) + CurrStatus.adslAturCurrStatus = 0; + } +*/ + ATUR_PERF_ESS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 33 Index 0"); +#endif + } + else{ + temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS; + if(temp>=0){ + current_intvl->AturPerfEs+=temp; + ATUR_PERF_ESS+=temp; + mib_pread.ATUR_PERF_ESS = RxMessage[4]; + } + else{ + current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; + ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; + mib_pread.ATUR_PERF_ESS=RxMessage[4]; + } + } + // to update rx/tx blocks + ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 20 Index 0"); +#endif + } + else{ + temp = RxMessage[4]; + } + ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 21 Index 0"); +#endif + } + else{ + temp2 = RxMessage[4]; + } + if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){ + current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; + ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; + mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); + } + else{ + current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); + ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); + mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); + } + current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk; + ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK; +/* + ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) + printk("\n\nCMV fail, Group 7 Address 20 Index 0"); + else{ + if(RxMessage[4]){ + current_intvl->AturChanPerfTxBlk+=RxMessage[4]; + ATUR_CHAN_TX_BLK+=RxMessage[4]; + } + } + ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) + printk("\n\nCMV fail, Group 7 Address 21 Index 0"); + else{ + if(RxMessage[4]){ + current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16); + ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16); + } + } +*/ + if(chantype.interleave == 1){ + ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 3 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL; + if(temp>=0){ + current_intvl->AturChanPerfCorrBlk+=temp; + ATUR_CHAN_CORR_BLK+=temp; + mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; + ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; + mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; + } + } + } + else if(chantype.fast == 1){ + ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 3 Index 1"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST; + if(temp>=0){ + current_intvl->AturChanPerfCorrBlk+=temp; + ATUR_CHAN_CORR_BLK+=temp; + mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; + ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; + mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; + } + } + } + + if(chantype.interleave == 1){ + ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 2 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL; + if(temp>=0){ + current_intvl->AturChanPerfUncorrBlk+=temp; + ATUR_CHAN_UNCORR_BLK+=temp; + mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; + ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; + mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; + } + } + } + else if(chantype.fast == 1){ + ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 2 Index 1"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST; + if(temp>=0){ + current_intvl->AturChanPerfUncorrBlk+=temp; + ATUR_CHAN_UNCORR_BLK+=temp; + mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; + ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; + mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; + } + } + } + + //RFC-3440 + +#ifdef AMAZON_MEI_MIB_RFC3440 + ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //??? + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 0 Address 0 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR; + if(temp>=0){ + current_intvl->AtucPerfStatFastR+=temp; + ATUC_PERF_STAT_FASTR+=temp; + mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; + ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; + } + } + ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //??? + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 0 Address 0 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR; + if(temp>=0){ + current_intvl->AtucPerfStatFailedFastR+=temp; + ATUC_PERF_STAT_FAILED_FASTR+=temp; + mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; + ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; + } + } + ATUC_PERF_STAT_SESL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 8 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL; + if(temp>=0){ + current_intvl->AtucPerfStatSesL+=temp; + ATUC_PERF_STAT_SESL+=temp; + mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; + ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; + } + } + ATUC_PERF_STAT_UASL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 10 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL; + if(temp>=0){ + current_intvl->AtucPerfStatUasL+=temp; + ATUC_PERF_STAT_UASL+=temp; + mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; + ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; + } + } + ATUR_PERF_STAT_SESL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 34 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL; + if(temp>=0){ + current_intvl->AtucPerfStatUasL+=temp; + ATUC_PERF_STAT_UASL+=temp; + mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; + ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; + mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; + } + } + +#endif + up(&mei_sema); + + do_gettimeofday(&time_fini); + i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec + }//showtime==1 + } + break; +#endif /* ] !IFX_SMALL_FOOTPRINT */ + case AMAZON_MEI_RESET: + case AMAZON_MEI_REBOOT: + case AMAZON_MEI_SHOWTIME: +/* if(mei_arc_swap_buff !=NULL){ + kfree(mei_arc_swap_buff); + mei_arc_swap_buff=NULL; + } + if(image_buffer !=NULL){ +// kfree(image_buffer); + vfree(image_buffer); + image_buffer =NULL; + } +*/ + if(clreoc_command_pkt !=NULL){ + kfree(clreoc_command_pkt); + clreoc_command_pkt =NULL; + } + for(i=0;istart_time)); + ATUC_PERF_LOFS=0; + ATUC_PERF_LOSS=0; + ATUC_PERF_ESS=0; + ATUC_PERF_INITS=0; + ATUR_PERF_LOFS=0; + ATUR_PERF_LOSS=0; + ATUR_PERF_LPR=0; + ATUR_PERF_ESS=0; + ATUR_CHAN_RECV_BLK=0; + ATUR_CHAN_TX_BLK=0; + ATUR_CHAN_CORR_BLK=0; + ATUR_CHAN_UNCORR_BLK=0; + memset((((u8 *)&AlarmConfProfile)+32), 0, 16*4); + AlarmConfProfile.adslLineAlarmConfProfileRowStatus=1; +*/ + PrevTxRate.adslAtucChanPrevTxRate=0; + PrevTxRate.adslAturChanPrevTxRate=0; + CurrStatus.adslAtucCurrStatus=0; + CurrStatus.adslAturCurrStatus=0; + + if((command==AMAZON_MEI_RESET) || (command==AMAZON_MEI_REBOOT)){ +#ifdef AMAZON_CHECK_LINK + if (adsl_link_notify){ + (*adsl_link_notify)(0); + } +#endif + showtime=0; + //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON + // disconnect net_dev + if(chantype.interleave==1){ + kfree(interleave_mei_net.priv); + unregister_netdev(&interleave_mei_net); +// if(unregister_netdev(&interleave_mei_net)!=0) +// printk("\n unregister interleave fail"); + } + else if(chantype.fast==1){ + kfree(fast_mei_net.priv); + unregister_netdev(&fast_mei_net); +// if(unregister_netdev(&fast_mei_net)!=0) +// printk("\n unregister fast fail"); + } + chantype.interleave=0; + chantype.fast=0; +// 603221:tc.chen start + chantype.bearchannel0 = 0; + chantype.bearchannel1 = 0; + adsl_mode = 0; +// 603221:tc.chen end + + while(1){ + + makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, NULL); //maximum allowed tx message length, in bytes + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ + //printk("AdslInitStatsData.FullInitializationCount++\n"); + AdslInitStatsData.FullInitializationCount++; + //printk("AdslInitStatsData.FailedFullInitializationCount++\n"); + AdslInitStatsData.FailedFullInitializationCount++; + //printk("AdslInitStatsData.LINIT_Errors++\n"); + AdslInitStatsData.LINIT_Errors++; + }else + { + //printk("RxMessage=%X\n",RxMessage[4]); + if ( RxMessage[4]!=0x1) + { + //printk("AdslInitStatsData.FullInitializationCount++\n"); + AdslInitStatsData.FullInitializationCount++; + if ( RxMessage[4] != 0x7) + { + //printk("AdslInitStatsData.LINIT_Errors++\n"); + AdslInitStatsData.LINIT_Errors++; + //printk("AdslInitStatsData.FailedFullInitializationCount++\n"); + AdslInitStatsData.FailedFullInitializationCount++; + + } + } + } + + reboot_flag=0; + wake_up_interruptible(&wait_queue_codeswap); //wake up codeswap daemon + + interruptible_sleep_on_timeout(&wait_queue_reboot, 1*HZ); // sleep until arc ready +#ifdef ARC_READY_ACK + if(reboot_flag!=0) + break; + else + { + up(&mei_sema); + printk("\n reboot retry"); + } +#else + break; +#endif + } + } + else{ //AMAZON_MEI_SHOWTIME + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; + + // clreoc stuff + makeCMV(H2D_CMV_READ, INFO, 83, 0, 1, data); //maximum allowed tx message length, in bytes + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 3 Address 83 Index 0"); +#endif + } + else{ + clreoc_max_tx_len = (int)RxMessage[4]; + clreoc_command_pkt = kmalloc((clreoc_max_tx_len*CLREOC_BUFF_SIZE), GFP_KERNEL); + if(clreoc_command_pkt == NULL){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("kmalloc error for clreoc_command_pkt\n\n"); +#endif + up(&mei_sema); + return -1; + } + for(i=0;ilen)>0){ + copy_to_user((char *)lon, (char*)(&(current_clreoc->len)), 4); + break; + } + else//wait for eoc data from higher layer + interruptible_sleep_on(&wait_queue_clreoc); + } + break; + case AMAZON_MEI_GET_EOC_DATA: + current_clreoc = list_entry(clreoc_list.next, amazon_clreoc_pkt, list); + if((current_clreoc->len)>0){ + copy_to_user((char*)lon, (char*)(current_clreoc->command), current_clreoc->len); + meierr=1; + list_del(clreoc_list.next); //remove and add to end of list + current_clreoc->len = 0; + list_add_tail(&(current_clreoc->list), &clreoc_list); + } + else + meierr=-1; + break; + case AMAZON_MEI_EOC_SEND: + copy_from_user((char *)(&debugrdwr), (char *)lon, sizeof(debugrdwr)); + eoc_skb = dev_alloc_skb(debugrdwr.iCount*4); + if(eoc_skb==NULL){ + printk("\n\nskb alloc fail"); + break; + } + + eoc_skb->len=debugrdwr.iCount*4; + memcpy(skb_put(eoc_skb, debugrdwr.iCount*4), (char *)debugrdwr.buffer, debugrdwr.iCount*4); + + ifx_push_eoc(eoc_skb); //pass data to higher layer + break; +#endif //#ifdef AMAZON_CLEAR_EOC + case AMAZON_MIB_LO_ATUC: + do_gettimeofday(&time_now); + if(lon&0x1){ + if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec)>2){ + current_intvl->AtucPerfLos++; + ATUC_PERF_LOSS++; + CurrStatus.adslAtucCurrStatus = 2; + } + (mib_pflagtime.ATUC_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec; + } + if(lon&0x2){ + if((time_now.tv_sec-(mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec)>2){ + current_intvl->AtucPerfLof++; + ATUC_PERF_LOFS++; + CurrStatus.adslAtucCurrStatus = 1; + } + (mib_pflagtime.ATUC_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec; + } + if(!(lon&0x3)) + CurrStatus.adslAtucCurrStatus = 0; + break; + case AMAZON_MIB_LO_ATUR: + do_gettimeofday(&time_now); + if(lon&0x1){ + if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec)>2){ + current_intvl->AturPerfLos++; + ATUR_PERF_LOSS++; + CurrStatus.adslAturCurrStatus = 2; + } + (mib_pflagtime.ATUR_PERF_LOSS_PTIME).tv_sec = time_now.tv_sec; + } + if(lon&0x2){ + if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec)>2){ + current_intvl->AturPerfLof++; + ATUR_PERF_LOFS++; + CurrStatus.adslAturCurrStatus = 1; + } + (mib_pflagtime.ATUR_PERF_LOFS_PTIME).tv_sec = time_now.tv_sec; + } + if(lon&0x4){ + if((time_now.tv_sec-(mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec)>2){ + current_intvl->AturPerfLpr++; + ATUR_PERF_LPR++; + CurrStatus.adslAturCurrStatus = 3; + } + (mib_pflagtime.ATUR_PERF_LPR_PTIME).tv_sec = time_now.tv_sec; + } + if(!(lon&0x7)) + CurrStatus.adslAturCurrStatus = 0; + break; + case AMAZON_MEI_DOWNLOAD: + // DMA the boot code page(s) +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n start download pages"); +#endif + for( boot_loop = 0; boot_loop < img_hdr->count; boot_loop++){ + if( img_hdr->page[boot_loop].p_size & BOOT_FLAG){ + page_size = meiGetPage( boot_loop, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); + if( page_size > 0){ + meiDMAWrite(dest_addr, mei_arc_swap_buff, page_size); + } + } + if( img_hdr->page[boot_loop].d_size & BOOT_FLAG){ + page_size = meiGetPage( boot_loop, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); + if( page_size > 0){ + meiDMAWrite( dest_addr, mei_arc_swap_buff, page_size); + } + } + } +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n pages downloaded"); +#endif + break; + //509221:tc.chen start + case AMAZON_MEI_DEBUG_MODE: + mei_debug_mode = lon; + break; + //509221:tc.chen end + } + return meierr; +} + + +////////////////////// Interrupt handler ///////////////////////////////////////////////////// +static void mei_interrupt_arcmsgav(int,void *,struct pt_regs *); +static void mei_interrupt_arcmsgav(int int1, void * void0, struct pt_regs * regs) +{ + u32 scratch; + u32 fetchpage; + u32 size; + u32 dest_addr; + u32 temp; + int i; + + meiDebugRead(ARC_MEI_MAILBOXR, &scratch, 1); + if(scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK) + { + if(showtime==1){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n Code Swap Request After ShowTime !!!"); +#endif + } + else{ +#ifdef AMAZON_MEI_DEBUG_ON +// printk("\n\n Code Swap Request"); +#endif + fetchpage = scratch & ~OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK; + size = meiGetPage( fetchpage, GET_PROG, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); + if( size > 0) + { +#ifdef AMAZON_MEI_DEBUG_ON +// printk(" : prom page num %d",fetchpage); +#endif + meiDMAWrite( dest_addr, mei_arc_swap_buff, size); + } + + size = meiGetPage( fetchpage, GET_DATA, MAXSWAPSIZE, mei_arc_swap_buff, &dest_addr); + if( size > 0) + { +#ifdef AMAZON_MEI_DEBUG_ON +// printk(" : data page num %d",fetchpage); +#endif + meiDMAWrite( dest_addr, mei_arc_swap_buff, size); + } + } + // Notify arc that mailbox read complete + meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); + + // Tell ARC Codeswap is done + meiLongwordWrite(MEI_TO_ARC_INT, MEI_TO_ARC_CS_DONE); + asm("SYNC"); + i=0; + while(i>4)==D2H_AUTONOMOUS_MODEM_READY_MSG){ //check ARC ready message + +#ifdef LOCK_RETRY + if (reboot_lock) + { + reboot_lock = 0; + up(&mei_sema); // allow cmv access + } +#else + up(&mei_sema); // allow cmv access +#endif + reboot_flag=1; +//#ifdef ADSL_LED_SUPPORT +#if 0 + led_support_check=1;//adsl led for 1.1.2.7.1.1 + adsl_led_flash();//adsl led for 1.1.2.7.1.1 +#endif + wake_up_interruptible(&wait_queue_reboot); // wait up ioctl reboot + } +#endif + } + } +// meiLongwordWrite(ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV); + mask_and_ack_amazon_irq(AMAZON_MEI_INT); + return; +} + +// 603221:tc.chen start +////////////////////////hdlc //////////////// + +// get hdlc status +static unsigned int ifx_me_hdlc_status(void) +{ + u16 CMVMSG[MSG_LENGTH]; + int ret; + + if (showtime!=1) + return -ENETRESET; + + makeCMV_local(H2D_CMV_READ, STAT, 14, 0, 1, NULL,CMVMSG); //Get HDLC status + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + return -EIO; + } + return CMVMSG[4]&0x0F; +} + +int ifx_me_is_resloved(int status) +{ + u16 CMVMSG[MSG_LENGTH]; + int ret; + + if (status == ME_HDLC_MSG_QUEUED || status == ME_HDLC_MSG_SENT) + return ME_HDLC_UNRESOLVED; + if (status == ME_HDLC_IDLE) + { + makeCMV_local(H2D_CMV_READ, CNTL, 2, 0, 1, NULL,CMVMSG); //Get ME-HDLC Control + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + return IFX_POP_EOC_FAIL; + } + if (CMVMSG[4]&(1<<0)) + { + return ME_HDLC_UNRESOLVED; + } + + } + return ME_HDLC_RESOLVED; +} + +int _ifx_me_hdlc_send(unsigned char *hdlc_pkt,int len,int max_length) +{ + int ret; + u16 CMVMSG[MSG_LENGTH]; + u16 data=0; + u16 pkt_len=len; + if (pkt_len > max_length) + { + printk("Exceed maximum eoc message length\n"); + return -ENOBUFS; + } + //while(pkt_len > 0) + { + makeCMV_local(H2D_CMV_WRITE, INFO, 81, 0, (pkt_len+1)/2,(u16 *)hdlc_pkt,CMVMSG); //Write clear eoc message to ARC + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + return -EIO; + } + + makeCMV_local(H2D_CMV_WRITE, INFO, 83, 2, 1,&pkt_len,CMVMSG); //Update tx message length + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + return -EIO; + } + + data = (1<<0); + makeCMV_local(H2D_CMV_WRITE, CNTL, 2, 0, 1,&data,CMVMSG); //Start to send + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + return -EIO; + } + return 0; + } +} + +static int ifx_me_hdlc_send(unsigned char *hdlc_pkt,int hdlc_pkt_len) +{ + int hdlc_status=0; + u16 CMVMSG[MSG_LENGTH]; + int max_hdlc_tx_length=0,ret=0,retry=0; + + while(retry<10) + { + hdlc_status = ifx_me_hdlc_status(); + if (ifx_me_is_resloved(hdlc_status)==ME_HDLC_RESOLVED) // arc ready to send HDLC message + { + makeCMV_local(H2D_CMV_READ, INFO, 83, 0, 1, NULL,CMVMSG); //Get Maximum Allowed HDLC Tx Message Length + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + return -EIO; + } + max_hdlc_tx_length = CMVMSG[4]; + ret = _ifx_me_hdlc_send(hdlc_pkt,hdlc_pkt_len,max_hdlc_tx_length); + return ret; + } + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(10); + } + return -EBUSY; +} + +int ifx_mei_hdlc_read(char *hdlc_pkt,int max_hdlc_pkt_len) +{ + u16 CMVMSG[MSG_LENGTH]; + int msg_read_len,ret=0,pkt_len=0,retry = 0; + + while(retry<10) + { + ret = ifx_me_hdlc_status(); + if (ret == ME_HDLC_RESP_RCVD) + { + int current_size=0; + makeCMV_local(H2D_CMV_READ, INFO, 83, 3, 1, NULL,CMVMSG); //Get EoC packet length + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + return -EIO; + } + + pkt_len = CMVMSG[4]; + if (pkt_len > max_hdlc_pkt_len) + { + ret = -ENOMEM; + goto error; + } + while( current_size < pkt_len) + { + if (pkt_len - current_size >(MSG_LENGTH*2-8)) + msg_read_len = (MSG_LENGTH*2-8); + else + msg_read_len = pkt_len - (current_size); + makeCMV_local(H2D_CMV_READ, INFO, 82, 0 + (current_size/2), (msg_read_len+1)/2, NULL,CMVMSG); //Get hdlc packet + ret = mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + if (ret != 0) + { + goto error; + } + memcpy(hdlc_pkt+current_size,&CMVMSG[4],msg_read_len); + current_size +=msg_read_len; + } + ret = current_size; + break; + }else + { + ret = -ENODATA; + } + + retry++; + set_current_state(TASK_INTERRUPTIBLE); + schedule_timeout(10); + + } + return ret; +error: + + return ret; +} + +////////////////////////hdlc //////////////// +// 603221:tc.chen end + +/////////////////////// clearEoC, int ifx_pop_eoc(sk_buff * pkt) ////////// +int ifx_pop_eoc(struct sk_buff * pkt); +int ifx_pop_eoc(struct sk_buff * pkt) +{ + amazon_clreoc_pkt * current; + if(showtime!=1){ + dev_kfree_skb(pkt); + return IFX_POP_EOC_FAIL; + } + if((pkt->len)>clreoc_max_tx_len){ + dev_kfree_skb(pkt); + return IFX_POP_EOC_FAIL; + } + current = list_entry(clreoc_list.next, amazon_clreoc_pkt, list); + while(1){ + if(current->len==0){ + memcpy(current->command, pkt->data, pkt->len); + current->len=pkt->len; + break; + } + else{ + if((current->list).next==&clreoc_list){ + dev_kfree_skb(pkt); + return IFX_POP_EOC_FAIL; //buffer full + } + current = list_entry((current->list).next,amazon_clreoc_pkt, list); + } + } + wake_up_interruptible(&wait_queue_clreoc); + + dev_kfree_skb(pkt); + return IFX_POP_EOC_DONE; +} +/* this is used in circular fifo mode */ +/* +int ifx_pop_eoc(sk_buff * pkt); +int ifx_pop_eoc(sk_buff * pkt) +{ + int buff_space,i; + if(showtime!=1) + return IFX_POP_EOC_FAIL; + + if(clreoc_wr>=clreoc_rd) + buff_space = (MEI_CLREOC_BUFF_SIZE-1)-(clreoc_wr - clreoc_rd); + else + buff_space = clreoc_rd - clreoc_wr - 1; + if((pkt->len)>buff_space) + return IFX_POP_EOC_FAIL; + + if((clreoc_wr+pkt->len)>MEI_CLREOC_BUFF_SIZE){ + memcpy((clreoc+clreoc_wr), pkt->data, ((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1)); + memcpy(clreoc, (pkt->data)+((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1), (pkt->len)-((clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE+1)); + clreoc_wr=(clreoc_wr+pkt->len)-MEI_CLREOC_BUFF_SIZE; + } + else{ + memcpy((clreoc+clreoc_wr), pkt->data, pkt->len); + if((clreoc_wr+pkt->len)=MEI_CLREOC_BUFF_SIZE) + clreoc_wr=0; + else + clreoc_wr+=pkt->len; + } + wake_up_interruptible(&wait_queue_clreoc); + return IFX_POP_EOC_DONE; +} +*/ + + +//////////////////////////////////////////////////////////////////////////// +//int amazon_mei_init_module (void); +//void amazon_mei_cleanup_module (void); +//int __init init_module (void); +//void __exit cleanup_module (void); + +int __init amazon_mei_init_module(void) +//int __init init_module(void) +{ + struct proc_dir_entry *entry; + int i; + +//dying gasp-start +#ifdef IFX_DYING_GASP + +//000003:fchang Start +#ifdef CONFIG_CPU_AMAZON_E + //GPIO31 :dying gasp event indication + // (1) logic high: dying gasp event is false (default) + // (2) logic low: dying gasp event is true + CLEAR_BIT((*((volatile u32 *)0xB0100B18)), 0x4); + CLEAR_BIT((*((volatile u32 *)0xB0100B1c)), 0x4); + CLEAR_BIT((*((volatile u32 *)0xB0100B20)), 0x4); + SET_BIT((*((volatile u32 *)0xB0100B24)), 0x4); + asm("SYNC"); +#else //000003:fchang End + + //GPIO31 :dying gasp event indication + // (1) logic high: dying gasp event is false (default) + // (2) logic low: dying gasp event is true + CLEAR_BIT((*((volatile u32 *)0xB0100B48)), 0x8000); + CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x8000); + CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x8000); + SET_BIT((*((volatile u32 *)0xB0100B54)), 0x8000); +#if 0 +//warning-led-start +//GPIO 22 + SET_BIT ((*((volatile u32 *)0xB0100B48)), 0x40); + CLEAR_BIT((*((volatile u32 *)0xB0100B4C)), 0x40); + CLEAR_BIT((*((volatile u32 *)0xB0100B50)), 0x40); + SET_BIT((*((volatile u32 *)0xB0100B54)), 0x40); + CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //GPIO ON + printk("LED ON ON ON ON ON ON....."); +//warning-led-end +#endif + asm("SYNC"); +#endif //000003:fchang + +#endif //IFX_DYING_GASP +//dying gasp -end + + + reg_entry_t regs_temp[PROC_ITEMS] = // Items being debugged + { + /* { flag, name, description } */ + { &arcmsgav, "arcmsgav", "arc to mei message ", 0 }, + { &cmv_reply, "cmv_reply", "cmv needs reply", 0}, + { &cmv_waiting, "cmv_waiting", "waiting for cmv reply from arc", 0}, + { &indicator_count, "indicator_count", "ARC to MEI indicator count", 0}, + { &cmv_count, "cmv_count", "MEI to ARC CMVs", 0}, + { &reply_count, "reply_count", "ARC to MEI Reply", 0}, + { (int *)Recent_indicator, "Recent_indicator", "most recent indicator", 0}, + { (int *)8, "version", "version of firmware", 0}, + }; + memcpy((char *)regs, (char *)regs_temp, sizeof(regs_temp)); + + + //sema_init(&mei_sema, 0); // semaphore initialization, mutex + sema_init(&mei_sema, 1); // semaphore initialization, mutex + + init_waitqueue_head(&wait_queue_arcmsgav); // for ARCMSGAV + init_waitqueue_head(&wait_queue_codeswap); // for codeswap daemon + init_waitqueue_head(&wait_queue_mibdaemon); // for mib daemon + init_waitqueue_head(&wait_queue_reboot); // for ioctl reboot + init_waitqueue_head(&wait_queue_clreoc); // for clreoc_wr function + init_waitqueue_head(&wait_queue_loop_diagnostic); // for loop diagnostic function +#ifdef ADSL_LED_SUPPORT + init_waitqueue_head(&wait_queue_led); // adsl led for led function + init_waitqueue_head(&wait_queue_led_polling); // adsl led for led function + led_task.routine = adsl_led_flash_task; // adsl led for led function + led_poll_init(); // adsl led for led function +#endif //ADSL_LED_SUPPORT +#ifdef IFX_DYING_GASP + init_waitqueue_head(&wait_queue_dying_gasp); // IFX_DYING_GASP + lop_poll_init(); // IFX_DYING_GASP +#endif //IFX_DYING_GASP + + init_waitqueue_head(&wait_queue_uas_poll);//joelin 04/16/2005 + unavailable_seconds_poll_init();//joelin 04/16/2005 + memset(&mib_pflagtime, 0, (sizeof(mib_flags_pretime))); + + // initialize link list for intervals + mei_mib = (amazon_mei_mib *)kmalloc((sizeof(amazon_mei_mib)*INTERVAL_NUM), GFP_KERNEL); + if(mei_mib == NULL){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("kmalloc error for amazon_mei_mib\n\n"); +#endif + return -1; + } + memset(mei_mib, 0, (sizeof(amazon_mei_mib)*INTERVAL_NUM)); + INIT_LIST_HEAD(&interval_list); + for(i=0;istart_time)); + // initialize clreoc list + clreoc_pkt = (amazon_clreoc_pkt *)kmalloc((sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE), GFP_KERNEL); + if(clreoc_pkt == NULL){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("kmalloc error for clreoc_pkt\n\n"); +#endif + return -1; + } + memset(clreoc_pkt, 0, (sizeof(amazon_clreoc_pkt)*CLREOC_BUFF_SIZE)); + INIT_LIST_HEAD(&clreoc_list); + for(i=0;ilow_ino; + entry->proc_fops = &proc_operations; + } else { +#ifdef AMAZON_MEI_DEBUG_ON + printk( KERN_ERR + ": can't create /proc/" MEI_DIRNAME + "/%s\n\n", regs[i].name); +#endif + return(-ENOMEM); + } + } + ///////////////////////////////// register net device //////////////////////////// + if(register_netdev(&phy_mei_net)!=0){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\n Register phy Device Failed."); +#endif + return -1; + } +/* + if(register_netdev(&interleave_mei_net)!=0){ + printk("\n\n Register interleave Device Failed."); + return -1; + } + if(register_netdev(&fast_mei_net)!=0){ + printk("\n\n Register fast Device Failed."); + return -1; + } +*/ +#ifdef DFE_LOOPBACK + mei_arc_swap_buff = (u32 *)kmalloc(MAXSWAPSIZE*4, GFP_KERNEL); + if (mei_arc_swap_buff){ +#ifdef ARC_READY_ACK + if(down_interruptible(&mei_sema)) //disable CMV access until ARC ready + { + return -ERESTARTSYS; + } +#ifdef LOCK_RETRY + reboot_lock = 1; +#endif +#endif + meiForceRebootAdslModem(); + kfree(mei_arc_swap_buff); + }else{ +#ifdef AMAZON_MEI_DEBUG_ON + printk("cannot load image: no memory\n\n"); +#endif + } +#endif +#ifdef IFX_SMALL_FOOTPRINT + mib_poll_init(); +#endif + return 0; +} + +void __exit amazon_mei_cleanup_module(void) +//void __exit cleanup_module(void) +{ + int i; +#ifdef ADSL_LED_SUPPORT + stop_led_module=1; //wake up and clean led module + led_support_check=0;//joelin , clear task + showtime=0;//joelin,clear task + //CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON + firmware_support_led=0;//joelin ,clear task + wake_up_interruptible(&wait_queue_led); //wake up and clean led module + wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module +#endif + for(i=0;icomm, "kmibpoll"); + sigfillset(&tsk->blocked); + + printk("Inside mib poll loop ...\n"); + i=0; + while(1){ + if(istart_time.tv_sec>=900){ + if(current_intvl->list.next!=&interval_list){ + current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); + do_gettimeofday(&(current_intvl->start_time)); + } + else{ + mib_ptr = list_entry(interval_list.next, amazon_mei_mib, list); + list_del(interval_list.next); + memset(mib_ptr, 0, sizeof(amazon_mei_mib)); + list_add_tail(&(mib_ptr->list), &interval_list); + if(current_intvl->list.next==&interval_list) +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nlink list error"); +#endif + current_intvl = list_entry(current_intvl->list.next, amazon_mei_mib, list); + do_gettimeofday(&(current_intvl->start_time)); + } + } + + if(down_interruptible(&mei_sema)) + return -ERESTARTSYS; +/* + ATUC_PERF_LO_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 0 Index 0"); +#endif + } + else{ + if(RxMessage[4]&PLAM_LOS_FailureBit){ + current_intvl->AtucPerfLos++; + ATUC_PERF_LOSS++; + CurrStatus.adslAtucCurrStatus = 2; + } + if(RxMessage[4]&PLAM_LOF_FailureBit){ + current_intvl->AtucPerfLof++; + ATUC_PERF_LOFS++; + CurrStatus.adslAtucCurrStatus = 1; + } + if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit))) + CurrStatus.adslAtucCurrStatus = 0; + } +*/ + + if(showtime!=1) + goto mib_poll_end; + ATUC_PERF_ESS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 7 Index 0"); +#endif + } + else{ + temp = RxMessage[4]-mib_pread.ATUC_PERF_ESS; + if(temp>=0){ + current_intvl->AtucPerfEs+=temp; + ATUC_PERF_ESS+=temp; + mib_pread.ATUC_PERF_ESS = RxMessage[4]; + } + else{ + current_intvl->AtucPerfEs+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; + ATUC_PERF_ESS+=0xffff-mib_pread.ATUC_PERF_ESS+RxMessage[4]; + mib_pread.ATUC_PERF_ESS = RxMessage[4]; + } + } +/* + ATUR_PERF_LO_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 1 Index 0"); +#endif + } + else{ + if(RxMessage[4]&PLAM_LOS_FailureBit){ + current_intvl->AturPerfLos++; + ATUR_PERF_LOSS++; + CurrStatus.adslAturCurrStatus = 2; + } + if(RxMessage[4]&PLAM_LOF_FailureBit){ + current_intvl->AturPerfLof++; + ATUR_PERF_LOFS++; + CurrStatus.adslAturCurrStatus = 1; + } + if(RxMessage[4]&PLAM_LPR_FailureBit){ + current_intvl->AturPerfLpr++; + ATUR_PERF_LPR++; + CurrStatus.adslAturCurrStatus = 3; + } + if(!(RxMessage[4]&(PLAM_LOS_FailureBit|PLAM_LOF_FailureBit|PLAM_LPR_FailureBit))) + CurrStatus.adslAturCurrStatus = 0; + } +*/ + if(showtime!=1) + goto mib_poll_end; + ATUR_PERF_ESS_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 33 Index 0"); +#endif + } + else{ + temp = RxMessage[4]-mib_pread.ATUR_PERF_ESS; + if(temp>=0){ + current_intvl->AturPerfEs+=temp; + ATUR_PERF_ESS+=temp; + mib_pread.ATUR_PERF_ESS = RxMessage[4]; + } + else{ + current_intvl->AturPerfEs+=0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; + ATUR_PERF_ESS+= 0xffff-mib_pread.ATUR_PERF_ESS+RxMessage[4]; + mib_pread.ATUR_PERF_ESS=RxMessage[4]; + } + } + if(showtime!=1) + goto mib_poll_end; + // to update rx/tx blocks + ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 20 Index 0"); +#endif + } + else{ + temp = RxMessage[4]; + } + if(showtime!=1) + goto mib_poll_end; + ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 21 Index 0"); +#endif + } + else{ + temp2 = RxMessage[4]; + } + if((temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK)>=0){ + current_intvl->AturChanPerfRxBlk+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; + ATUR_CHAN_RECV_BLK+=temp + (temp2<<16) - mib_pread.ATUR_CHAN_RECV_BLK; + mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); + } + else{ + current_intvl->AturChanPerfRxBlk+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); + ATUR_CHAN_RECV_BLK+=0xffffffff - mib_pread.ATUR_CHAN_RECV_BLK +(temp + (temp2<<16)); + mib_pread.ATUR_CHAN_RECV_BLK = temp + (temp2<<16); + } + current_intvl->AturChanPerfTxBlk = current_intvl->AturChanPerfRxBlk; + ATUR_CHAN_TX_BLK = ATUR_CHAN_RECV_BLK; +/* + ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) + printk("\n\nCMV fail, Group 7 Address 20 Index 0"); + else{ + if(RxMessage[4]){ + current_intvl->AturChanPerfTxBlk+=RxMessage[4]; + ATUR_CHAN_TX_BLK+=RxMessage[4]; + } + } + ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS) + printk("\n\nCMV fail, Group 7 Address 21 Index 0"); + else{ + if(RxMessage[4]){ + current_intvl->AturChanPerfTxBlk+=(int)((RxMessage[4])<<16); + ATUR_CHAN_TX_BLK+=(int)((RxMessage[4])<<16); + } + } +*/ + if(chantype.interleave == 1){ + if(showtime!=1) + goto mib_poll_end; + ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 3 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_INTL; + if(temp>=0){ + current_intvl->AturChanPerfCorrBlk+=temp; + ATUR_CHAN_CORR_BLK+=temp; + mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; + ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_INTL +RxMessage[4]; + mib_pread.ATUR_CHAN_CORR_BLK_INTL = RxMessage[4]; + } + } + } + else if(chantype.fast == 1){ + if(showtime!=1) + goto mib_poll_end; + ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 3 Index 1"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_CORR_BLK_FAST; + if(temp>=0){ + current_intvl->AturChanPerfCorrBlk+=temp; + ATUR_CHAN_CORR_BLK+=temp; + mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfCorrBlk+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; + ATUR_CHAN_CORR_BLK+=0xffff - mib_pread.ATUR_CHAN_CORR_BLK_FAST + RxMessage[4]; + mib_pread.ATUR_CHAN_CORR_BLK_FAST = RxMessage[4]; + } + } + } + + if(chantype.interleave == 1){ + if(showtime!=1) + goto mib_poll_end; + ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 2 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL; + if(temp>=0){ + current_intvl->AturChanPerfUncorrBlk+=temp; + ATUR_CHAN_UNCORR_BLK+=temp; + mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; + ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_INTL + RxMessage[4]; + mib_pread.ATUR_CHAN_UNCORR_BLK_INTL = RxMessage[4]; + } + } + } + else if(chantype.fast == 1){ + if(showtime!=1) + goto mib_poll_end; + ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 2 Index 1"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST; + if(temp>=0){ + current_intvl->AturChanPerfUncorrBlk+=temp; + ATUR_CHAN_UNCORR_BLK+=temp; + mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; + } + else{ + current_intvl->AturChanPerfUncorrBlk+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; + ATUR_CHAN_UNCORR_BLK+=0xffff - mib_pread.ATUR_CHAN_UNCORR_BLK_FAST + RxMessage[4]; + mib_pread.ATUR_CHAN_UNCORR_BLK_FAST = RxMessage[4]; + } + } + } + + //RFC-3440 + +#ifdef AMAZON_MEI_MIB_RFC3440 + if(showtime!=1) + goto mib_poll_end; + ATUC_PERF_STAT_FASTR_FLAG_MAKECMV; //??? + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 0 Address 0 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FASTR; + if(temp>=0){ + current_intvl->AtucPerfStatFastR+=temp; + ATUC_PERF_STAT_FASTR+=temp; + mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; + ATUC_PERF_STAT_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FASTR + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_FASTR = RxMessage[4]; + } + } + if(showtime!=1) + goto mib_poll_end; + ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV; //??? + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 0 Address 0 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_FAILED_FASTR; + if(temp>=0){ + current_intvl->AtucPerfStatFailedFastR+=temp; + ATUC_PERF_STAT_FAILED_FASTR+=temp; + mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatFailedFastR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; + ATUC_PERF_STAT_FAILED_FASTR+=0xffff - mib_pread.ATUC_PERF_STAT_FAILED_FASTR + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_FAILED_FASTR = RxMessage[4]; + } + } + if(showtime!=1) + goto mib_poll_end; + ATUC_PERF_STAT_SESL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 8 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_SESL; + if(temp>=0){ + current_intvl->AtucPerfStatSesL+=temp; + ATUC_PERF_STAT_SESL+=temp; + mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatSesL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; + ATUC_PERF_STAT_SESL+=0xffff - mib_pread.ATUC_PERF_STAT_SESL + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_SESL = RxMessage[4]; + } + } + if(showtime!=1) + goto mib_poll_end; + ATUC_PERF_STAT_UASL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 10 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUC_PERF_STAT_UASL; + if(temp>=0){ + current_intvl->AtucPerfStatUasL+=temp; + ATUC_PERF_STAT_UASL+=temp; + mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; + ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUC_PERF_STAT_UASL + RxMessage[4]; + mib_pread.ATUC_PERF_STAT_UASL = RxMessage[4]; + } + } + if(showtime!=1) + goto mib_poll_end; + ATUR_PERF_STAT_SESL_FLAG_MAKECMV; + if(meiCMV(TxMessage, YES_REPLY)!=MEI_SUCCESS){ +#ifdef AMAZON_MEI_DEBUG_ON + printk("\n\nCMV fail, Group 7 Address 34 Index 0"); +#endif + } + else{ + temp = RxMessage[4] - mib_pread.ATUR_PERF_STAT_SESL; + if(temp>=0){ + current_intvl->AtucPerfStatUasL+=temp; + ATUC_PERF_STAT_UASL+=temp; + mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; + } + else{ + current_intvl->AtucPerfStatUasL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; + ATUC_PERF_STAT_UASL+=0xffff - mib_pread.ATUR_PERF_STAT_SESL + RxMessage[4]; + mib_pread.ATUR_PERF_STAT_SESL = RxMessage[4]; + } + } + +#endif +mib_poll_end: + up(&mei_sema); + + do_gettimeofday(&time_fini); + i = ((int)((time_fini.tv_sec-time_now.tv_sec)*1000)) + ((int)((time_fini.tv_usec-time_now.tv_usec)/1000)) ; //msec + }//showtime==1 + } + +} +int mib_poll_init(void) +{ + printk("Starting mib_poll...\n"); + + kernel_thread(adsl_mib_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); + return 0; +} +#endif //IFX_SMALL_FOOTPRINT +//EXPORT_NO_SYMBOLS; + +#ifdef ADSL_LED_SUPPORT +// adsl led -start +int led_status_on=0,led_need_to_flash=0; +int led_current_flashing=0; +unsigned long led_delay=0; +static int led_poll(void *unused) +{ + stop_led_module=0; //begin polling ... + while(!stop_led_module){ + if ((!led_status_on)&&(!led_need_to_flash)) interruptible_sleep_on_timeout (&wait_queue_led_polling,1000); //10 seconds timeout for waiting wakeup +// else printk("direct running task, no waiting"); + run_task_queue(&tq_ifx_led);//joelin task +// printk("led and LOP polling...\n"); + } + return 0; +} +static int led_poll_init(void) +{ +// printk("Starting adsl led polling...\n"); + +//warning-led-start +// CLEAR_BIT((*((volatile u32 *)0xB0100B40)), 0x40); //Warning LED GPIO ON +//warning-led-end + + kernel_thread(led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); + return 0; +} + +int adsl_led_flash(void) +{ + int i; + if (!firmware_support_led) return 0; //joelin version check + + if (led_status_on == 0 && led_need_to_flash == 0) + { + queue_task(&led_task, &tq_ifx_led);//joelin task + wake_up_interruptible(&wait_queue_led_polling); //wake up and clean led module +// printk("queue Task 1...\n"); //joelin test + } + led_need_to_flash=1;//asking to flash led + + return 0; +} + +int adsl_led_flash_task(void *ptr) +{ + + u16 one=1; + u16 zero=0; + u16 data=0x0600; + int kernel_use=1; + u16 CMVMSG[MSG_LENGTH]; +//adsl-led-start for >v1.1.2.7.1.1 +// printk("Task Running...\n"); //joelin test + if ((firmware_support_led==2)&&(led_support_check)) + { + led_support_check=0; + data=0x0600; + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &data,CMVMSG); //configure GPIO9 GPIO10 as outputs + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 2, 1, &data,CMVMSG); //enable writing to bit 9 and bit10 + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + + data=0x0a01; + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 4, 1, &data,CMVMSG); //use GPIO10 for TR68 .Enable and don't invert. + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + +#ifdef DATA_LED_ON_MODE + data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on. +#else + data=0x0900; +#endif + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .turn off. + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, CMVMSG); + + } + if (!showtime) {led_need_to_flash=0; return 0;} +//adsl-led-end for >v1.1.2.7.1.1 + + if (led_status_on == 0 || led_need_to_flash == 1) + { + + if (led_current_flashing==0) + { + if (firmware_support_led==1){//>1.1.2.3.1.1 + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &one,CMVMSG); //flash + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); + } + else if (firmware_support_led==2){//>1.1.2.7.1.1 + data=0x0901;//flash + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .flash. + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); + + }//(firmware_support_led==2) + led_current_flashing = 1;//turn on led + } + led_status_on=1; + + do{//do nothing , waiting untill no data traffic + led_need_to_flash=0; + interruptible_sleep_on_timeout(&wait_queue_led, 25); //the time for LED Off , if no data traffic + }while(led_need_to_flash==1); + + }else if (led_status_on == 1 && led_need_to_flash==0) + { + if (led_current_flashing==1) + {//turn off led + if (firmware_support_led==1){//>1.1.2.3.1.1 + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 0, 1, &zero,CMVMSG);//off + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); + } //>1.1.2.3.1.1 + else if (firmware_support_led==2){//>1.1.2.7.1.1 +#ifdef DATA_LED_ON_MODE + data=0x0903;//tecom //use GPIO9 for TR68 data led .turn on. +#else + data=0x0900;//off +#endif + makeCMV_local(H2D_CMV_WRITE, INFO, 91, 5, 1, &data,CMVMSG); //use GPIO9 for TR68 data led .off. + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_CMV_WINHOST, &CMVMSG); + + }//(firmware_support_led==2) + led_status_on=0; + led_current_flashing = 0; + } + } + + if (led_status_on == 1 || led_need_to_flash) + {//led flash job on going or led need to flash + queue_task(&led_task, &tq_ifx_led); //joelin task +// printk("queue Task 2...\n"); //joelin test + } + return 0; +} +//joelin adsl led-end +#else +int adsl_led_flash(void) +{ + return 0; +} +#endif //ADSL_LED_SUPPORT +#ifdef IFX_DYING_GASP +static int lop_poll(void *unused) +{ + + while(1) + { + interruptible_sleep_on_timeout(&wait_queue_dying_gasp, 1); +#ifdef CONFIG_CPU_AMAZON_E //000003:fchang + if(showtime&&((*((volatile u32 *)0xB0100B14))&0x4)==0x0) {//000003:fchang +#else //000003:fchang + if(showtime&&((*((volatile u32 *)0xB0100B44))&0x8000)==0x0) { +#endif //CONFIG_CPU_AMAZON_E + mei_ioctl((struct inode *)0,NULL, AMAZON_MEI_WRITEDEBUG, &lop_debugwr); + printk("send dying gasp..\n");} + + } + return 0; + } +static int lop_poll_init(void) +{ +// printk("Starting LOP polling...\n"); + kernel_thread(lop_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); + return 0; +} + +#endif //IFX_DYING_GASP + +//joelin 04/16/2005-satrt +static int unavailable_seconds_poll(void *unused) +{ + while(1){ + interruptible_sleep_on_timeout (&wait_queue_uas_poll,100); //1 second timeout for waiting wakeup + if (!showtime) unavailable_seconds++; + } + return 0; +} +static int unavailable_seconds_poll_init(void) +{ + + kernel_thread(unavailable_seconds_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGNAL); + return 0; +} + + +//joelin 04/16/2005-end +EXPORT_SYMBOL(meiDebugWrite); +EXPORT_SYMBOL(ifx_pop_eoc); + +MODULE_LICENSE("GPL"); + +module_init(amazon_mei_init_module); +module_exit(amazon_mei_cleanup_module); + diff --git a/target/linux/amazon/files/drivers/char/ifx_ssc.c b/target/linux/amazon/files/drivers/char/ifx_ssc.c new file mode 100644 index 0000000000..ea01659a94 --- /dev/null +++ b/target/linux/amazon/files/drivers/char/ifx_ssc.c @@ -0,0 +1,2121 @@ +/************************************************** + * + * drivers/ifx/serial/ifx_ssc.c + * + * Driver for IFX_SSC serial ports + * + * Copyright (C) 2004 Infineon Technologies AG + * Author Michael Schoenenborn (IFX COM TI BT) + * + */ +#define IFX_SSC_DRV_VERSION "0.2.1" +/* + ************************************************** + * + * This driver was originally based on the INCA-IP driver, but due to + * fundamental conceptual drawbacks there has been changed a lot. + * + * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn + * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +// ### TO DO: general issues: +// - power management +// - interrupt handling (direct/indirect) +// - pin/mux-handling (just overall concept due to project dependency) +// - multiple instances capability +// - slave functionality + +/* + * Include section + */ +#ifndef EXPORT_SYMTAB +#define EXPORT_SYMTAB +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +//#include + +#include +#include +#include +#include +#include + +#include +#include +#include + +#include +#include +#include +#include + +#ifdef SSC_FRAME_INT_ENABLE +#undef SSC_FRAME_INT_ENABLE +#endif + +#define not_yet + +#define SPI_VINETIC + +/* + * Deal with CONFIG_MODVERSIONS + */ +#if CONFIG_MODVERSIONS==1 +# include +#endif + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Michael Schoenenborn"); +MODULE_DESCRIPTION("IFX SSC driver"); +MODULE_SUPPORTED_DEVICE("ifx_ssc"); +MODULE_PARM(maj, "i"); +MODULE_PARM_DESC(maj, "Major device number"); + +/* allow the user to set the major device number */ +static int maj = 0; + + +/* + * This is the per-channel data structure containing pointers, flags + * and variables for the port. This driver supports a maximum of PORT_CNT. + * isp is allocated in ifx_ssc_init() based on the chip version. + */ +static struct ifx_ssc_port *isp; + +/* prototypes for fops */ +static ssize_t ifx_ssc_read(struct file *, char *, size_t, loff_t *); +static ssize_t ifx_ssc_write(struct file *, const char *, size_t, loff_t *); +//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *); +int ifx_ssc_ioctl(struct inode *, struct file *, unsigned int, unsigned long); +int ifx_ssc_open(struct inode *, struct file *); +int ifx_ssc_close(struct inode *, struct file *); + +/* other forward declarations */ +static unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info); +static void ifx_ssc_rx_int(int, void *, struct pt_regs *); +static void ifx_ssc_tx_int(int, void *, struct pt_regs *); +static void ifx_ssc_err_int(int, void *, struct pt_regs *); +#ifdef SSC_FRAME_INT_ENABLE +static void ifx_ssc_frm_int(int, void *, struct pt_regs *); +#endif +static void tx_int(struct ifx_ssc_port *); +static int ifx_ssc1_read_proc(char *, char **, off_t, int, int *, void *); +static void ifx_gpio_init(void); +/************************************************************************ + * Function declaration + ************************************************************************/ +//interrupt.c +extern unsigned int amazon_get_fpi_hz(void); +extern void disable_amazon_irq(unsigned int irq_nr); +extern void enable_amazon_irq(unsigned int irq_nr); +extern void mask_and_ack_amazon_irq(unsigned int irq_nr); + + +/*****************************************************************/ +typedef struct { + int (*request)(unsigned int irq, + void (*handler)(int, void *, struct pt_regs *), + unsigned long irqflags, + const char * devname, + void *dev_id); + void (*free)(unsigned int irq, void *dev_id); + void (*enable)(unsigned int irq); + void (*disable)(unsigned int irq); + void (*clear)(unsigned int irq); +} ifx_int_wrapper_t; + +static ifx_int_wrapper_t ifx_int_wrapper = { + request: request_irq, // IM action: enable int + free: free_irq, // IM action: disable int + enable: enable_amazon_irq, + disable: disable_amazon_irq, + clear: mask_and_ack_amazon_irq, + //end: +}; + +/* Fops-struct */ +static struct file_operations ifx_ssc_fops = { + owner: THIS_MODULE, + read: ifx_ssc_read, /* read */ + write: ifx_ssc_write, /* write */ +// poll: ifx_ssc_poll, /* poll */ + ioctl: ifx_ssc_ioctl, /* ioctl */ + open: ifx_ssc_open, /* open */ + release: ifx_ssc_close, /* release */ +}; + + +static inline unsigned int ifx_ssc_get_kernel_clk(struct ifx_ssc_port *info) +{ // ATTENTION: This function assumes that the CLC register is set with the + // appropriate value for RMC. + unsigned int rmc; + + rmc = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CLC) & + IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET; + if (rmc == 0){ + printk("ifx_ssc_get_kernel_clk rmc==0 \n"); + return (0); + } + return (amazon_get_fpi_hz() / rmc); +} + +#ifndef not_yet +#ifdef IFX_SSC_INT_USE_BH +/* + * This routine is used by the interrupt handler to schedule + * processing in the software interrupt portion of the driver + * (also known as the "bottom half"). This can be called any + * number of times for any channel without harm. + */ +static inline void +ifx_ssc_sched_event(struct ifx_ssc_port *info, int event) +{ + info->event |= 1 << event; /* remember what kind of event and who */ + queue_task(&info->tqueue, &tq_cyclades); /* it belongs to */ + mark_bh(CYCLADES_BH); /* then trigger event */ +} /* ifx_ssc_sched_event */ + + +/* + * This routine is used to handle the "bottom half" processing for the + * serial driver, known also the "software interrupt" processing. + * This processing is done at the kernel interrupt level, after the + * cy#/_interrupt() has returned, BUT WITH INTERRUPTS TURNED ON. This + * is where time-consuming activities which can not be done in the + * interrupt driver proper are done; the interrupt driver schedules + * them using ifx_ssc_sched_event(), and they get done here. + * + * This is done through one level of indirection--the task queue. + * When a hardware interrupt service routine wants service by the + * driver's bottom half, it enqueues the appropriate tq_struct (one + * per port) to the tq_cyclades work queue and sets a request flag + * via mark_bh for processing that queue. When the time is right, + * do_ifx_ssc_bh is called (because of the mark_bh) and it requests + * that the work queue be processed. + * + * Although this may seem unwieldy, it gives the system a way to + * pass an argument (in this case the pointer to the ifx_ssc_port + * structure) to the bottom half of the driver. Previous kernels + * had to poll every port to see if that port needed servicing. + */ +static void +do_ifx_ssc_bh(void) +{ + run_task_queue(&tq_cyclades); +} /* do_ifx_ssc_bh */ + +static void +do_softint(void *private_) +{ + struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_; + + if (test_and_clear_bit(Cy_EVENT_HANGUP, &info->event)) { + wake_up_interruptible(&info->open_wait); + info->flags &= ~(ASYNC_NORMAL_ACTIVE| + ASYNC_CALLOUT_ACTIVE); + } + if (test_and_clear_bit(Cy_EVENT_OPEN_WAKEUP, &info->event)) { + wake_up_interruptible(&info->open_wait); + } + if (test_and_clear_bit(Cy_EVENT_DELTA_WAKEUP, &info->event)) { + wake_up_interruptible(&info->delta_msr_wait); + } + if (test_and_clear_bit(Cy_EVENT_WRITE_WAKEUP, &info->event)) { + wake_up_interruptible(&tty->write_wait); + } +#ifdef Z_WAKE + if (test_and_clear_bit(Cy_EVENT_SHUTDOWN_WAKEUP, &info->event)) { + wake_up_interruptible(&info->shutdown_wait); + } +#endif +} /* do_softint */ +#endif /* IFX_SSC_INT_USE_BH */ +#endif // not_yet + +inline static void +rx_int(struct ifx_ssc_port *info) +{ + int fifo_fill_lev, bytes_in_buf, i; + unsigned long tmp_val; + unsigned long *tmp_ptr; + unsigned int rx_valid_cnt; + /* number of words waiting in the RX FIFO */ + fifo_fill_lev = (READ_PERIPHERAL_REGISTER(info->mapbase + + IFX_SSC_FSTAT) & + IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >> + IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET; + // Note: There are always 32 bits in a fifo-entry except for the last + // word of a contigous transfer block and except for not in rx-only + // mode and CON.ENBV set. But for this case it should be a convention + // in software which helps: + // In tx or rx/tx mode all transfers from the buffer to the FIFO are + // 32-bit wide, except for the last three bytes, which could be a + // combination of 16- and 8-bit access. + // => The whole block is received as 32-bit words as a contigous stream, + // even if there was a gap in tx which has the fifo run out of data! + // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)! + + /* free space in the RX buffer */ + bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr; + // transfer with 32 bits per entry + while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) { + tmp_ptr = (unsigned long *)info->rxbuf_ptr; + *tmp_ptr = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB); + info->rxbuf_ptr += 4; + info->stats.rxBytes += 4; + fifo_fill_lev --; + bytes_in_buf -= 4; + } // while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) + // now do the rest as mentioned in STATE.RXBV + while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) { + rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & + IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> + IFX_SSC_STATE_RX_BYTE_VALID_OFFSET; + if (rx_valid_cnt == 0) break; + if (rx_valid_cnt > bytes_in_buf) { + // ### TO DO: warning message: not block aligned data, other data + // in this entry will be lost + rx_valid_cnt = bytes_in_buf; + } + tmp_val = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RB); + + for (i=0; irxbuf_ptr = (tmp_val >> ( 8 * (rx_valid_cnt - i-1))) & 0xff; +/* + *info->rxbuf_ptr = tmp_val & 0xff; + tmp_val >>= 8; +*/ + bytes_in_buf--; + + + info->rxbuf_ptr++; + } + info->stats.rxBytes += rx_valid_cnt; + } // while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) + + // check if transfer is complete + if (info->rxbuf_ptr >= info->rxbuf_end) { + ifx_int_wrapper.disable(info->rxirq); + /* wakeup any processes waiting in read() */ + wake_up_interruptible(&info->rwait); + /* and in poll() */ + //wake_up_interruptible(&info->pwait); + } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) && + (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) == 0)) { + // if buffer not filled completely and rx request done initiate new transfer +/* + if (info->rxbuf_end - info->rxbuf_ptr < 65536) +*/ + if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE) + WRITE_PERIPHERAL_REGISTER((info->rxbuf_end - info->rxbuf_ptr) << + IFX_SSC_RXREQ_RXCOUNT_OFFSET, + info->mapbase + IFX_SSC_RXREQ); + else + WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, + info->mapbase + IFX_SSC_RXREQ); + } +} // rx_int + +inline static void +tx_int(struct ifx_ssc_port *info) +{ + + int fifo_space, fill, i; + fifo_space = ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_ID) & + IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) - + ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_FSTAT) & + IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >> + IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET); + + if (fifo_space == 0) + return; + + fill = info->txbuf_end - info->txbuf_ptr; + + if (fill > fifo_space * 4) + fill = fifo_space * 4; + + for (i = 0; i < fill / 4; i++) { + // at first 32 bit access + WRITE_PERIPHERAL_REGISTER(*(UINT32 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); + info->txbuf_ptr += 4; + } + + fifo_space -= fill / 4; + info->stats.txBytes += fill & ~0x3; + fill &= 0x3; + if ((fifo_space > 0) & (fill > 1)) { + // trailing 16 bit access + WRITE_PERIPHERAL_REGISTER_16(*(UINT16 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); + info->txbuf_ptr += 2; + info->stats.txBytes += 2; + fifo_space --; +/* added by bingtao */ + fill -=2; + } + if ((fifo_space > 0) & (fill > 0)) { + // trailing 8 bit access + WRITE_PERIPHERAL_REGISTER_8(*(UINT8 *)info->txbuf_ptr, info->mapbase + IFX_SSC_TB); + info->txbuf_ptr ++; + info->stats.txBytes ++; +/* + fifo_space --; +*/ + } + + // check if transmission complete + if (info->txbuf_ptr >= info->txbuf_end) { + ifx_int_wrapper.disable(info->txirq); + kfree(info->txbuf); + info->txbuf = NULL; + /* wake up any process waiting in poll() */ + //wake_up_interruptible(&info->pwait); + } + +} // tx_int + +static void +ifx_ssc_rx_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; + //WRITE_PERIPHERAL_REGISTER(IFX_SSC_R_BIT, info->mapbase + IFX_SSC_IRN_CR); + rx_int(info); +} + +static void +ifx_ssc_tx_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; + //WRITE_PERIPHERAL_REGISTER(IFX_SSC_T_BIT, info->mapbase + IFX_SSC_IRN_CR); + tx_int(info); +} + +static void +ifx_ssc_err_int(int irq, void *dev_id, struct pt_regs *regs) +{ + struct ifx_ssc_port *info = (struct ifx_ssc_port *)dev_id; + unsigned int state; + unsigned int write_back = 0; + unsigned long flags; + + + local_irq_save(flags); + state = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE); + + if ((state & IFX_SSC_STATE_RX_UFL) != 0) { + info->stats.rxUnErr++; + write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR; + } + if ((state & IFX_SSC_STATE_RX_OFL) != 0) { + info->stats.rxOvErr++; + write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR; + } + if ((state & IFX_SSC_STATE_TX_OFL) != 0) { + info->stats.txOvErr++; + write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR; + } + if ((state & IFX_SSC_STATE_TX_UFL) != 0) { + info->stats.txUnErr++; + write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR; + } +// if ((state & IFX_SSC_STATE_ABORT_ERR) != 0) { +// info->stats.abortErr++; +// write_back |= IFX_SSC_WHBSTATE_CLR_ABORT_ERROR; +// } + if ((state & IFX_SSC_STATE_MODE_ERR) != 0) { + info->stats.modeErr++; + write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR; + } + + if (write_back) + WRITE_PERIPHERAL_REGISTER(write_back, + info->mapbase + IFX_SSC_WHBSTATE); + + local_irq_restore(flags); +} + +#ifdef SSC_FRAME_INT_ENABLE +static void +ifx_ssc_frm_int(int irq, void *dev_id, struct pt_regs *regs) +{ + // ### TO DO: wake up framing wait-queue in conjunction with batch execution +} +#endif + +static void +ifx_ssc_abort(struct ifx_ssc_port *info) +{ + unsigned long flags; + bool enabled; + + local_irq_save(flags); + + // disable all int's + ifx_int_wrapper.disable(info->rxirq); + ifx_int_wrapper.disable(info->txirq); + ifx_int_wrapper.disable(info->errirq); +/* + ifx_int_wrapper.disable(info->frmirq); +*/ + local_irq_restore(flags); + + // disable SSC (also aborts a receive request!) + // ### TO DO: Perhaps it's better to abort after the receiption of a + // complete word. The disable cuts the transmission immediatly and + // releases the chip selects. This could result in unpredictable + // behavior of connected external devices! + enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) + & IFX_SSC_STATE_IS_ENABLED) != 0; + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + + + // flush fifos + WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, + info->mapbase + IFX_SSC_TXFCON); + WRITE_PERIPHERAL_REGISTER(IFX_SSC_XFCON_FIFO_FLUSH, + info->mapbase + IFX_SSC_RXFCON); + + // free txbuf + if (info->txbuf != NULL) { + kfree(info->txbuf); + info->txbuf = NULL; + } + + // wakeup read process + if (info->rxbuf != NULL) + wake_up_interruptible(&info->rwait); + + // clear pending int's + ifx_int_wrapper.clear(info->rxirq); + ifx_int_wrapper.clear(info->txirq); + ifx_int_wrapper.clear(info->errirq); +/* + ifx_int_wrapper.clear(info->frmirq); +*/ + + // clear error flags + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR, + info->mapbase + IFX_SSC_WHBSTATE); + + //printk("IFX SSC%d: Transmission aborted\n", info->port_nr); + // enable SSC + if (enabled) + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + +} // ifx_ssc_abort + + +/* + * This routine is called whenever a port is opened. It enforces + * exclusive opening of a port and enables interrupts, etc. + */ +int +ifx_ssc_open(struct inode *inode, struct file * filp) +{ + struct ifx_ssc_port *info; + int line; + int from_kernel = 0; + + if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) { + from_kernel = 1; + line = (int)inode; + } + else { + line = MINOR(filp->f_dentry->d_inode->i_rdev); + filp->f_op = &ifx_ssc_fops; + } + + /* don't open more minor devices than we can support */ + if (line < 0 || line >= PORT_CNT) + return -ENXIO; + + info = &isp[line]; + + /* exclusive open */ + if (info->port_is_open != 0) + return -EBUSY; + info->port_is_open++; + + ifx_int_wrapper.disable(info->rxirq); + ifx_int_wrapper.disable(info->txirq); + ifx_int_wrapper.disable(info->errirq); +/* + ifx_int_wrapper.disable(info->frmirq); +*/ + + /* Flush and enable TX/RX FIFO */ + WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << + IFX_SSC_XFCON_ITL_OFFSET) | + IFX_SSC_XFCON_FIFO_FLUSH | + IFX_SSC_XFCON_FIFO_ENABLE, + info->mapbase + IFX_SSC_TXFCON); + WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << + IFX_SSC_XFCON_ITL_OFFSET) | + IFX_SSC_XFCON_FIFO_FLUSH | + IFX_SSC_XFCON_FIFO_ENABLE, + info->mapbase + IFX_SSC_RXFCON); + + + /* logically flush the software FIFOs */ + info->rxbuf_ptr = 0; + info->txbuf_ptr = 0; + + /* clear all error bits */ + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ALL_ERROR, + info->mapbase + IFX_SSC_WHBSTATE); + + // clear pending interrupts + ifx_int_wrapper.clear(info->rxirq); + ifx_int_wrapper.clear(info->txirq); + ifx_int_wrapper.clear(info->errirq); +/* + ifx_int_wrapper.clear(info->frmirq); +*/ + + // enable SSC + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + + MOD_INC_USE_COUNT; + + return 0; +} /* ifx_ssc_open */ +EXPORT_SYMBOL(ifx_ssc_open); + +/* + * This routine is called when a particular device is closed. + */ +int +ifx_ssc_close(struct inode *inode, struct file *filp) +{ + struct ifx_ssc_port *info; + int idx; + + if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) + idx = (int)inode; + else + idx = MINOR(filp->f_dentry->d_inode->i_rdev); + + if (idx < 0 || idx >= PORT_CNT) + return -ENXIO; + + info = &isp[idx]; + if (!info) + return -ENXIO; + + // disable SSC + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + + // call abort function to disable int's, flush fifos... + ifx_ssc_abort(info); + + info->port_is_open --; + MOD_DEC_USE_COUNT; + + return 0; +} /* ifx_ssc_close */ +EXPORT_SYMBOL(ifx_ssc_close); + +/* added by bingtao */ +/* helper routine to handle reads from the kernel or user-space */ +/* info->rxbuf : never kfree and contains valid data */ +/* should be points to NULL after copying data !!! */ +static ssize_t +ifx_ssc_read_helper_poll(struct ifx_ssc_port *info, char *buf, size_t len, + int from_kernel) +{ + ssize_t ret_val; + unsigned long flags; + + if (info->opts.modeRxTx == IFX_SSC_MODE_TX) + return -EFAULT; + local_irq_save(flags); + info->rxbuf_ptr = info->rxbuf; + info->rxbuf_end = info->rxbuf + len; + local_irq_restore(flags); +/* Vinetic driver always works in IFX_SSC_MODE_RXTX */ +/* TXRX in poll mode */ + while (info->rxbuf_ptr < info->rxbuf_end){ +/* This is the key point, if you don't check this condition + kfree (NULL) will happen + because tx only need write into FIFO, it's much fast than rx + So when rx still waiting , tx already finish and release buf +*/ + if (info->txbuf_ptr < info->txbuf_end) { + tx_int(info); + } + + rx_int(info); + }; + + ret_val = info->rxbuf_ptr - info->rxbuf; + return (ret_val); +} // ifx_ssc_read_helper_poll + +/* helper routine to handle reads from the kernel or user-space */ +/* info->rx_buf : never kfree and contains valid data */ +/* should be points to NULL after copying data !!! */ +static ssize_t +ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len, + int from_kernel) +{ + ssize_t ret_val; + unsigned long flags; + DECLARE_WAITQUEUE(wait, current); + + if (info->opts.modeRxTx == IFX_SSC_MODE_TX) + return -EFAULT; + local_irq_save(flags); + info->rxbuf_ptr = info->rxbuf; + info->rxbuf_end = info->rxbuf + len; + if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { + if ((info->txbuf == NULL) || + (info->txbuf != info->txbuf_ptr) || + (info->txbuf_end != len + info->txbuf)) { + local_irq_restore(flags); + printk("IFX SSC - %s: write must be called before calling " + "read in combined RX/TX!\n", __FUNCTION__); + return -EFAULT; + } + local_irq_restore(flags); + /* should enable tx, right?*/ + tx_int(info); + if (info->txbuf_ptr < info->txbuf_end){ + ifx_int_wrapper.enable(info->txirq); + } + + ifx_int_wrapper.enable(info->rxirq); + } else { // rx mode + local_irq_restore(flags); + if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & + IFX_SSC_RXCNT_TODO_MASK) + return -EBUSY; + ifx_int_wrapper.enable(info->rxirq); + // rx request limited to ' bytes +/* + if (len < 65536) +*/ + if (len < IFX_SSC_RXREQ_BLOCK_SIZE) + WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, + info->mapbase + IFX_SSC_RXREQ); + else + WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, + info->mapbase + IFX_SSC_RXREQ); + } + + __add_wait_queue(&info->rwait, &wait); + set_current_state(TASK_INTERRUPTIBLE); + // wakeup done in rx_int + + do { + local_irq_save(flags); + if (info->rxbuf_ptr >= info->rxbuf_end) + break; + local_irq_restore(flags); + +// if (filp->f_flags & O_NONBLOCK) +// { +// N = -EAGAIN; +// goto out; +// } + if (signal_pending(current)) { + ret_val = -ERESTARTSYS; + goto out; + } + schedule(); + } while (1); + + ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len + local_irq_restore(flags); + + out: + current->state = TASK_RUNNING; + __remove_wait_queue(&info->rwait, &wait); + return (ret_val); +} // ifx_ssc_read_helper + + +#if 0 +/* helper routine to handle reads from the kernel or user-space */ +/* appropriate in interrupt context */ +static ssize_t +ifx_ssc_read_helper(struct ifx_ssc_port *info, char *buf, size_t len, + int from_kernel) +{ + ssize_t ret_val; + unsigned long flags; + DECLARE_WAITQUEUE(wait, current); + + if (info->opts.modeRxTx == IFX_SSC_MODE_TX) + return -EFAULT; + local_irq_save(flags); + info->rxbuf_ptr = info->rxbuf; + info->rxbuf_end = info->rxbuf + len; + if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { + if ((info->txbuf == NULL) || + (info->txbuf != info->txbuf_ptr) || + (info->txbuf_end != len + info->txbuf)) { + local_irq_restore(flags); + printk("IFX SSC - %s: write must be called before calling " + "read in combined RX/TX!\n", __FUNCTION__); + return -EFAULT; + } + local_irq_restore(flags); + /* should enable tx, right?*/ + tx_int(info); + if (!in_irq()){ + if (info->txbuf_ptr < info->txbuf_end){ + ifx_int_wrapper.enable(info->txirq); + } + ifx_int_wrapper.enable(info->rxirq); + } + } else { // rx mode + local_irq_restore(flags); + if (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & + IFX_SSC_RXCNT_TODO_MASK) + return -EBUSY; + if (!in_irq()){ + ifx_int_wrapper.enable(info->rxirq); + } + + if (len < IFX_SSC_RXREQ_BLOCK_SIZE) + WRITE_PERIPHERAL_REGISTER(len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, + info->mapbase + IFX_SSC_RXREQ); + else + WRITE_PERIPHERAL_REGISTER(IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, + info->mapbase + IFX_SSC_RXREQ); + } + if (in_irq()){ + do { + rx_int(info); + if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX) { + tx_int(info); + } + + if (info->rxbuf_ptr >= info->rxbuf_end) + break; + } while (1); + ret_val = info->rxbuf_ptr - info->rxbuf; + }else{ + __add_wait_queue(&info->rwait, &wait); + set_current_state(TASK_INTERRUPTIBLE); + // wakeup done in rx_int + + do { + local_irq_save(flags); + if (info->rxbuf_ptr >= info->rxbuf_end) + break; + local_irq_restore(flags); + + if (signal_pending(current)) { + ret_val = -ERESTARTSYS; + goto out; + } + schedule(); + } while (1); + + ret_val = info->rxbuf_ptr - info->rxbuf; // should be equal to len + local_irq_restore(flags); + + out: + current->state = TASK_RUNNING; + __remove_wait_queue(&info->rwait, &wait); + } + return (ret_val); +} // ifx_ssc_read_helper +#endif + +/* helper routine to handle writes to the kernel or user-space */ +/* info->txbuf has two cases: + * 1) return value < 0 (-EFAULT), not touched at all + * 2) kfree and points to NULL in interrupt routine (but maybe later ) + */ +static ssize_t +ifx_ssc_write_helper(struct ifx_ssc_port *info, const char *buf, + size_t len, int from_kernel) +{ + // check if in tx or tx/rx mode + if (info->opts.modeRxTx == IFX_SSC_MODE_RX) + return -EFAULT; + + info->txbuf_ptr = info->txbuf; + info->txbuf_end = len + info->txbuf; + /* start the transmission (not in rx/tx, see read helper) */ + if (info->opts.modeRxTx == IFX_SSC_MODE_TX) { + tx_int(info); + if (info->txbuf_ptr < info->txbuf_end){ + ifx_int_wrapper.enable(info->txirq); + } + } + //local_irq_restore(flags); + return len; +} + +/* + * kernel interfaces for read and write. + * The caller must set port to: n for SSC with n=m-1 (e.g. n=0 for SSC1) + */ +ssize_t +ifx_ssc_kread(int port, char *kbuf, size_t len) +{ + struct ifx_ssc_port *info; + ssize_t ret_val; + + if (port < 0 || port >= PORT_CNT) + return -ENXIO; + + if (len == 0) + return 0; + + info = &isp[port]; + + // check if reception in progress + if (info->rxbuf != NULL){ + printk("SSC device busy\n"); + return -EBUSY; + } + + info->rxbuf = kbuf; + if (info->rxbuf == NULL){ + printk("SSC device error\n"); + return -EINVAL; + } + +/* changed by bingtao */ + /* change by TaiCheng */ + //if (!in_irq()){ + if (0){ + ret_val = ifx_ssc_read_helper(info, kbuf, len, 1); + }else{ + ret_val = ifx_ssc_read_helper_poll(info, kbuf, len, 1); + }; + info->rxbuf = NULL; + + // ### TO DO: perhaps warn if ret_val != len + ifx_int_wrapper.disable(info->rxirq); + + return (ret_val); +} // ifx_ssc_kread +EXPORT_SYMBOL(ifx_ssc_kread); + +ssize_t +ifx_ssc_kwrite(int port, const char *kbuf, size_t len) +{ + struct ifx_ssc_port *info; + ssize_t ret_val; + + if (port < 0 || port >= PORT_CNT) + return -ENXIO; + + if (len == 0) + return 0; + + info = &isp[port]; + + // check if transmission in progress + if (info->txbuf != NULL) + return -EBUSY; + info->txbuf = (char *)kbuf; + + ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 1); + if (ret_val < 0){ + info->txbuf = NULL; + } + return ret_val; +} +EXPORT_SYMBOL(ifx_ssc_kwrite); + + +/* + * user interfaces to read and write + */ +static ssize_t +ifx_ssc_read(struct file *filp, char *ubuf, size_t len, loff_t *off) +{ + ssize_t ret_val; + int idx; + struct ifx_ssc_port *info; + +/* + if (len == 0) + return (0); +*/ + idx = MINOR(filp->f_dentry->d_inode->i_rdev); + info = &isp[idx]; + + // check if reception in progress + if (info->rxbuf != NULL) + return -EBUSY; + + info->rxbuf = kmalloc(len+ 3, GFP_KERNEL); + if (info->rxbuf == NULL) + return -ENOMEM; + + ret_val = ifx_ssc_read_helper(info, info->rxbuf, len, 0); + // ### TO DO: perhaps warn if ret_val != len + if (copy_to_user((void*)ubuf, info->rxbuf, ret_val) != 0) + ret_val = -EFAULT; + + ifx_int_wrapper.disable(info->rxirq); + + kfree(info->rxbuf); + info->rxbuf = NULL; + return (ret_val); +} // ifx_ssc_read + +/* + * As many bytes as we have free space for are copied from the user + * into txbuf and the actual byte count is returned. The transmission is + * always kicked off by calling the appropriate TX routine. + */ +static ssize_t +ifx_ssc_write(struct file *filp, const char *ubuf, size_t len, loff_t *off) +{ + int idx; + struct ifx_ssc_port *info; + int ret_val; + + if (len == 0) + return (0); + + idx = MINOR(filp->f_dentry->d_inode->i_rdev); + info = &isp[idx]; + + // check if transmission in progress + if (info->txbuf != NULL) + return -EBUSY; + + info->txbuf = kmalloc(len+ 3, GFP_KERNEL); + if (info->txbuf == NULL) + return -ENOMEM; + + ret_val = copy_from_user(info->txbuf, ubuf, len); + if (ret_val == 0) + ret_val = ifx_ssc_write_helper(info, info->txbuf, len, 0); + else + ret_val = -EFAULT; + if (ret_val < 0) { + kfree(info->txbuf); // otherwise will be done in ISR + info->txbuf = NULL; + } + return (ret_val); +} /* ifx_ssc_write */ + + +/* + * ------------------------------------------------------------ + * ifx_ssc_ioctl() and friends + * ------------------------------------------------------------ + */ + +/*----------------------------------------------------------------------------- + FUNC-NAME : ifx_ssc_frm_status_get + LONG-NAME : framing status get + PURPOSE : Get the actual status of the framing. + + PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. + + RESULT : pointer to a structure ifx_ssc_frm_status which holds busy and + count values. + + REMARKS : Returns a register value independent of framing is enabled or + not! Changes structure inside of info, so the return value isn't + needed at all, but could be used for simple access. +-----------------------------------------------------------------------------*/ +static struct ifx_ssc_frm_status * +ifx_ssc_frm_status_get(struct ifx_ssc_port *info) +{ + unsigned long tmp; + + tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFSTAT); + info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0; + info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0; + info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK) + >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET; + info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) + >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET; + tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON); + info->frm_status.EnIntAfterData = + (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0; + info->frm_status.EnIntAfterPause = + (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0; + return (&info->frm_status); +} // ifx_ssc_frm_status_get + + +/*----------------------------------------------------------------------------- + FUNC-NAME : ifx_ssc_frm_control_get + LONG-NAME : framing control get + PURPOSE : Get the actual control values of the framing. + + PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. + + RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits + and count reload values. + + REMARKS : Changes structure inside of info, so the return value isn't + needed at all, but could be used for simple access. +-----------------------------------------------------------------------------*/ +static struct ifx_ssc_frm_opts * +ifx_ssc_frm_control_get(struct ifx_ssc_port *info) +{ + unsigned long tmp; + + tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON); + info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0; + info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK) + >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET; + info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) + >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; + info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK) + >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET; + info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK) + >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; + info->frm_opts.StopAfterPause = + (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0; + return (&info->frm_opts); +} // ifx_ssc_frm_control_get + + +/*----------------------------------------------------------------------------- + FUNC-NAME : ifx_ssc_frm_control_set + LONG-NAME : framing control set + PURPOSE : Set the actual control values of the framing. + + PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. + + RESULT : pointer to a structure ifx_ssc_frm_opts which holds control bits + and count reload values. + + REMARKS : +-----------------------------------------------------------------------------*/ +static int +ifx_ssc_frm_control_set(struct ifx_ssc_port *info) +{ + unsigned long tmp; + + // check parameters + if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX) || + (info->frm_opts.DataLength < 1) || + (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX) || + (info->frm_opts.PauseLength < 1) || + ((info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> + IFX_SSC_SFCON_PAUSE_DATA_OFFSET)) != 0 ) || + ((info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> + IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)) != 0 )) + return -EINVAL; + + // read interrupt bits (they're not changed here) + tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_SFCON) & + (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | + IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE); + + // set all values with respect to it's bit position (for data and pause + // length set N-1) + tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET; + tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET; + tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET; + tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET; + tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE; + tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE; + + WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON); + + return 0; +} // ifx_ssc_frm_control_set + + +/*----------------------------------------------------------------------------- + FUNC-NAME : ifx_ssc_rxtx_mode_set + LONG-NAME : rxtx mode set + PURPOSE : Set the transmission mode. + + PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. + + RESULT : Returns error code + + REMARKS : Assumes that SSC not used (SSC disabled, device not opened yet + or just closed) +-----------------------------------------------------------------------------*/ +static int +ifx_ssc_rxtx_mode_set(struct ifx_ssc_port *info, unsigned int val) +{ + unsigned long tmp; + + // check parameters + if (!(info) || (val & ~(IFX_SSC_MODE_MASK))) + return -EINVAL; + /*check BUSY and RXCNT*/ + if ( READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY + ||READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK) + return -EBUSY; + // modify + tmp = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) & + ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val); + WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_CON); + info->opts.modeRxTx = val; +/* + printk(KERN_DEBUG "IFX SSC%d: Setting mode to %s%s\n", + info->port_nr, + ((val & IFX_SSC_CON_RX_OFF) == 0) ? "rx ":"", + ((val & IFX_SSC_CON_TX_OFF) == 0) ? "tx":""); +*/ + return 0; +} // ifx_ssc_rxtx_mode_set + +void ifx_gpio_init(void) +{ + u32 temp; +/* set gpio pin p0.10(SPI_DIN) p0.11(SPI_DOUT) p0.12(SPI_CLK) p0.13(SPI_CS2) direction */ + temp = *(AMAZON_GPIO_P0_DIR) ; + temp &= 0xFFFFFBFF; + temp |= 0x3800; + *(AMAZON_GPIO_P0_DIR) = temp; +/* set port 0 alternate select register 0 */ + temp = *(AMAZON_GPIO_P0_ALTSEL0) ; + temp &= 0xFFFFC3FF; + temp |= 0x00001c00; + *(AMAZON_GPIO_P0_ALTSEL0) = temp; + +/* set port 0 alternate select register 1 */ + temp = *(AMAZON_GPIO_P0_ALTSEL1) ; + temp &= 0xFFFFC3FF; + temp |= 0x00002000; + *(AMAZON_GPIO_P0_ALTSEL1) = temp; + +/* set port 0 open drain mode register */ + temp = *(AMAZON_GPIO_P0_OD); + temp |= 0x00003800; /* set output pin normal mode */ + *(AMAZON_GPIO_P0_OD)= temp; +} + +/* + * This routine intializes the SSC appropriately depending + * on slave/master and full-/half-duplex mode. + * It assumes that the SSC is disabled and the fifo's and buffers + * are flushes later on. + */ +static int +ifx_ssc_sethwopts(struct ifx_ssc_port *info) +{ + unsigned long flags, bits; + struct ifx_ssc_hwopts *opts = &info->opts; + + /* sanity checks */ + if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH) || + (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH)) { + printk("%s: sanity check failed\n", __FUNCTION__); + return -EINVAL; + } + bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET; + bits |= IFX_SSC_CON_ENABLE_BYTE_VALID; +// if (opts->abortErrDetect) +// bits |= IFX_SSC_CON_ABORT_ERR_CHECK; + if (opts->rxOvErrDetect) + bits |= IFX_SSC_CON_RX_OFL_CHECK; + if (opts->rxUndErrDetect) + bits |= IFX_SSC_CON_RX_UFL_CHECK; + if (opts->txOvErrDetect) + bits |= IFX_SSC_CON_TX_OFL_CHECK; + if (opts->txUndErrDetect) + bits |= IFX_SSC_CON_TX_UFL_CHECK; + if (opts->loopBack) + bits |= IFX_SSC_CON_LOOPBACK_MODE; + if (opts->echoMode) + bits |= IFX_SSC_CON_ECHO_MODE_ON; + if (opts->headingControl) + bits |= IFX_SSC_CON_MSB_FIRST; + if (opts->clockPhase) + bits |= IFX_SSC_CON_LATCH_THEN_SHIFT; + if (opts->clockPolarity) + bits |= IFX_SSC_CON_CLOCK_FALL; + switch (opts->modeRxTx) { + case IFX_SSC_MODE_TX: + bits |= IFX_SSC_CON_RX_OFF; + break; + case IFX_SSC_MODE_RX: + bits |= IFX_SSC_CON_TX_OFF; + break; + } // switch (opts->modeRxT) + local_irq_save(flags); + WRITE_PERIPHERAL_REGISTER(bits, info->mapbase + IFX_SSC_CON); + WRITE_PERIPHERAL_REGISTER((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) | + (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), + info->mapbase + IFX_SSC_GPOCON); + //master mode + if (opts->masterSelect){ + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE); + }else{ + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_MASTER_SELECT,info->mapbase + IFX_SSC_WHBSTATE); + } + // init serial framing + WRITE_PERIPHERAL_REGISTER(0, info->mapbase + IFX_SSC_SFCON); + /* set up the port pins */ + //check for general requirements to switch (external) pad/pin characteristics + ifx_gpio_init(); + local_irq_restore(flags); + + return 0; +} // ifx_ssc_sethwopts + +static int +ifx_ssc_set_baud(struct ifx_ssc_port *info, unsigned int baud) +{ + unsigned int ifx_ssc_clock; + unsigned int br; + unsigned long flags; + bool enabled; + + ifx_ssc_clock = ifx_ssc_get_kernel_clk(info); + if (ifx_ssc_clock ==0) + return -EINVAL; + + local_irq_save(flags); + /* have to disable the SSC to set the baudrate */ + enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) + & IFX_SSC_STATE_IS_ENABLED) != 0; + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + + // compute divider + br = ((ifx_ssc_clock >> 1)/baud) - 1; + asm("SYNC"); + if (br > 0xffff || + ((br == 0) && + ((READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & + IFX_SSC_STATE_IS_MASTER) == 0))){ + local_irq_restore(flags); + printk("%s: illegal baudrate %u\n", __FUNCTION__, baud); + return -EINVAL; + } + WRITE_PERIPHERAL_REGISTER(br, info->mapbase + IFX_SSC_BR); + if (enabled) + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + + local_irq_restore(flags); + return 0; +} // ifx_ssc_set_baud + +static int +ifx_ssc_hwinit(struct ifx_ssc_port *info) +{ + unsigned long flags; + bool enabled; + + /* have to disable the SSC */ + enabled = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) + & IFX_SSC_STATE_IS_ENABLED) != 0; + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + + if (ifx_ssc_sethwopts(info) < 0) + { + printk("%s: setting the hardware options failed\n", + __FUNCTION__); + return -EINVAL; + } + + if (ifx_ssc_set_baud(info, info->baud) < 0) { + printk("%s: setting the baud rate failed\n", __FUNCTION__); + return -EINVAL; + } + local_irq_save(flags); + /* TX FIFO */ + WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_TXFIFO_FL << + IFX_SSC_XFCON_ITL_OFFSET) | + IFX_SSC_XFCON_FIFO_ENABLE, + info->mapbase + IFX_SSC_TXFCON); + /* RX FIFO */ + WRITE_PERIPHERAL_REGISTER((IFX_SSC_DEF_RXFIFO_FL << + IFX_SSC_XFCON_ITL_OFFSET) | + IFX_SSC_XFCON_FIFO_ENABLE, + info->mapbase + IFX_SSC_RXFCON); + local_irq_restore(flags); + if (enabled) + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_SET_ENABLE, + info->mapbase + IFX_SSC_WHBSTATE); + return 0; +} // ifx_ssc_hwinit + +/*----------------------------------------------------------------------------- + FUNC-NAME : ifx_ssc_batch_exec + LONG-NAME : + PURPOSE : + + PARAMETER : *info pointer to the port-specific structure ifx_ssc_port. + + RESULT : Returns error code + + REMARKS : +-----------------------------------------------------------------------------*/ +static int +ifx_ssc_batch_exec(struct ifx_ssc_port *info, struct ifx_ssc_batch_list *batch_anchor) +{ + // ### TO DO: implement user space batch execution + // first, copy the whole linked list from user to kernel space + // save some hardware options + // execute list + // restore hardware options if selected + return -EFAULT; +} // ifx_ssc_batch_exec + + +/* + * This routine allows the driver to implement device- + * specific ioctl's. If the ioctl number passed in cmd is + * not recognized by the driver, it should return ENOIOCTLCMD. + */ +int +ifx_ssc_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, + unsigned long data) +{ + struct ifx_ssc_port *info; + int line, ret_val = 0; + unsigned long flags; + unsigned long tmp; + int from_kernel = 0; + + if ((inode == (struct inode *)0) || (inode == (struct inode *)1)) + { + from_kernel = 1; + line = (int)inode; + } + else + line = MINOR(filp->f_dentry->d_inode->i_rdev); + + /* don't use more minor devices than we can support */ + if (line < 0 || line >= PORT_CNT) + return -ENXIO; + + info = &isp[line]; + + switch (cmd) { + case IFX_SSC_STATS_READ: + /* data must be a pointer to a struct ifx_ssc_statistics */ + if (from_kernel) + memcpy((void *)data, (void *)&info->stats, + sizeof(struct ifx_ssc_statistics)); + else + if (copy_to_user((void *)data, + (void *)&info->stats, + sizeof(struct ifx_ssc_statistics))) + ret_val = -EFAULT; + break; + case IFX_SSC_STATS_RESET: + /* just resets the statistics counters */ + memset((void *)&info->stats, 0, sizeof(struct ifx_ssc_statistics)); + break; + case IFX_SSC_BAUD_SET: + /* if the buffers are not empty then the port is */ + /* busy and we shouldn't change things on-the-fly! */ + if (!info->txbuf || !info->rxbuf || + (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) + & IFX_SSC_STATE_BUSY)) { + ret_val = -EBUSY; + break; + } + /* misuse flags */ + if (from_kernel) + flags = *((unsigned long *)data); + else + if (copy_from_user((void *)&flags, + (void *)data, sizeof(flags))) + { + ret_val = -EFAULT; + break; + } + if (flags == 0) + { + ret_val = -EINVAL; + break; + } + if (ifx_ssc_set_baud(info, flags) < 0) + { + ret_val = -EINVAL; + break; + } + info->baud = flags; + break; + case IFX_SSC_BAUD_GET: + if (from_kernel) + *((unsigned int *)data) = info->baud; + else + if (copy_to_user((void *)data, + (void *)&info->baud, + sizeof(unsigned long))) + ret_val = -EFAULT; + break; + case IFX_SSC_RXTX_MODE_SET: + if (from_kernel) + tmp = *((unsigned long *)data); + else + if (copy_from_user((void *)&tmp, + (void *)data, sizeof(tmp))) { + ret_val = -EFAULT; + break; + } + ret_val = ifx_ssc_rxtx_mode_set(info, tmp); + break; + case IFX_SSC_RXTX_MODE_GET: + tmp = READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_CON) & + (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)); + if (from_kernel) + *((unsigned int *)data) = tmp; + else + if (copy_to_user((void *)data, + (void *)&tmp, + sizeof(tmp))) + ret_val = -EFAULT; + break; + + case IFX_SSC_ABORT: + ifx_ssc_abort(info); + break; + + case IFX_SSC_GPO_OUT_SET: + if (from_kernel) + tmp = *((unsigned long *)data); + else + if (copy_from_user((void *)&tmp, + (void *)data, sizeof(tmp))) { + ret_val = -EFAULT; + break; + } + if (tmp > IFX_SSC_MAX_GPO_OUT) + ret_val = -EINVAL; + else + WRITE_PERIPHERAL_REGISTER + (1<<(tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS), + info->mapbase + IFX_SSC_WHBGPOSTAT); + break; + case IFX_SSC_GPO_OUT_CLR: + if (from_kernel) + tmp = *((unsigned long *)data); + else + if (copy_from_user((void *)&tmp, + (void *)data, sizeof(tmp))) { + ret_val = -EFAULT; + break; + } + if (tmp > IFX_SSC_MAX_GPO_OUT) + ret_val = -EINVAL; + else { + WRITE_PERIPHERAL_REGISTER + (1<<(tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS), + info->mapbase + IFX_SSC_WHBGPOSTAT); + } + break; + case IFX_SSC_GPO_OUT_GET: + tmp = READ_PERIPHERAL_REGISTER + (info->mapbase + IFX_SSC_GPOSTAT); + if (from_kernel) + *((unsigned int *)data) = tmp; + else + if (copy_to_user((void *)data, + (void *)&tmp, + sizeof(tmp))) + ret_val = -EFAULT; + break; + case IFX_SSC_FRM_STATUS_GET: + ifx_ssc_frm_status_get(info); + if (from_kernel) + memcpy((void *)data, (void *)&info->frm_status, + sizeof(struct ifx_ssc_frm_status)); + else + if (copy_to_user((void *)data, + (void *)&info->frm_status, + sizeof(struct ifx_ssc_frm_status))) + ret_val = -EFAULT; + break; + case IFX_SSC_FRM_CONTROL_GET: + ifx_ssc_frm_control_get(info); + if (from_kernel) + memcpy((void *)data, (void *)&info->frm_opts, + sizeof(struct ifx_ssc_frm_opts)); + else + if (copy_to_user((void *)data, + (void *)&info->frm_opts, + sizeof(struct ifx_ssc_frm_opts))) + ret_val = -EFAULT; + break; + case IFX_SSC_FRM_CONTROL_SET: + if (from_kernel) + memcpy((void *)&info->frm_opts, (void *)data, + sizeof(struct ifx_ssc_frm_opts)); + else + if (copy_to_user((void *)&info->frm_opts, + (void *)data, + sizeof(struct ifx_ssc_frm_opts))){ + ret_val = -EFAULT; + break; + } + ret_val = ifx_ssc_frm_control_set(info); + break; + case IFX_SSC_HWOPTS_SET: + /* data must be a pointer to a struct ifx_ssc_hwopts */ + /* if the buffers are not empty then the port is */ + /* busy and we shouldn't change things on-the-fly! */ + if (!info->txbuf || !info->rxbuf || + (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) + & IFX_SSC_STATE_BUSY)) { + ret_val = -EBUSY; + break; + } + if (from_kernel) + memcpy((void *)&info->opts, (void *)data, + sizeof(struct ifx_ssc_hwopts)); + else + if (copy_from_user((void *)&info->opts, + (void *)data, + sizeof(struct ifx_ssc_hwopts))) + { + ret_val = -EFAULT; + break; + } + if (ifx_ssc_hwinit(info) < 0) + { + ret_val = -EIO; + } + break; + case IFX_SSC_HWOPTS_GET: + /* data must be a pointer to a struct ifx_ssc_hwopts */ + if (from_kernel) + memcpy((void *)data, (void *)&info->opts, + sizeof(struct ifx_ssc_hwopts)); + else + if (copy_to_user((void *)data, + (void *)&info->opts, + sizeof(struct ifx_ssc_hwopts))) + ret_val = -EFAULT; + break; + default: + ret_val = -ENOIOCTLCMD; + } + + return ret_val; +} /* ifx_ssc_ioctl */ +EXPORT_SYMBOL(ifx_ssc_ioctl); + +///* the poll routine */ +//static unsigned int +//ifx_ssc_poll(struct file *filp, struct poll_table_struct *pts) +//{ +// int unit = MINOR(filp->f_dentry->d_inode->i_rdev); +// struct ifx_ssc_port *info; +// unsigned int mask = 0; +// int spc; +// +// info = &isp[unit]; +// +// /* add event to the wait queues */ +// /* DO NOT FORGET TO DO A WAKEUP ON THESE !!!! */ +// poll_wait(filp, &info->pwait, pts); +// +// /* are there bytes in the RX SW-FIFO? */ +// if (info->rxrp != info->rxwp) +// mask |= POLLIN | POLLRDNORM; +// +// /* free space in the TX SW-FIFO */ +// spc = info->txrp - info->txwp - 1; +// if (spc < 0) +// spc += TX_BUFSIZE; +//#ifdef IFX_SSC_USEDMA +// /* writing always works, except in the DMA case when all descriptors */ +// /* are used up */ +// if (unit == 1 && info->dma_freecnt == 0) +// spc = 0; +//#endif +// if (spc > 0) +// mask |= POLLOUT | POLLWRNORM; +// +// return (mask); +//} + +static int +ifx_ssc1_read_proc(char *page, char **start, off_t offset, int count, int *eof, void *data) +{ + int off = 0; + unsigned long flags; + + /* don't want any interrupts here */ + save_flags(flags); + cli(); + + + /* print statistics */ + off += sprintf(page+off, "Statistics for Infineon Synchronous Serial Controller SSC1\n"); + off += sprintf(page+off, "RX overflow errors %d\n", isp[0].stats.rxOvErr); + off += sprintf(page+off, "RX underflow errors %d\n", isp[0].stats.rxUnErr); + off += sprintf(page+off, "TX overflow errors %d\n", isp[0].stats.txOvErr); + off += sprintf(page+off, "TX underflow errors %d\n", isp[0].stats.txUnErr); + off += sprintf(page+off, "Abort errors %d\n", isp[0].stats.abortErr); + off += sprintf(page+off, "Mode errors %d\n", isp[0].stats.modeErr); + off += sprintf(page+off, "RX Bytes %d\n", isp[0].stats.rxBytes); + off += sprintf(page+off, "TX Bytes %d\n", isp[0].stats.txBytes); + + restore_flags (flags); /* XXXXX */ + *eof = 1; + return (off); +} + + +/* + * This routine prints out the appropriate serial driver version number + */ +static inline void +show_version(void) +{ +#if 0 + printk("Infineon Technologies Synchronous Serial Controller (SSC) driver\n" + " version %s - built %s %s\n", IFX_SSC_DRV_VERSION, __DATE__, __TIME__); +#endif +} /* show_version */ + + +/* + * Due to the fact that a port can be dynamically switched between slave + * and master mode using an IOCTL the hardware is not initialized here, + * but in ifx_ssc_hwinit() as a result of an IOCTL. + */ +int __init +ifx_ssc_init(void) +{ + struct ifx_ssc_port *info; + int i, nbytes; + unsigned long flags; + int ret_val; + + // ### TO DO: dynamic port count evaluation due to pin multiplexing + + ret_val = -ENOMEM; + nbytes = PORT_CNT * sizeof(struct ifx_ssc_port); + isp = (struct ifx_ssc_port *)kmalloc(nbytes, GFP_KERNEL); + if (isp == NULL) + { + printk("%s: no memory for isp\n", __FUNCTION__); + return (ret_val); + } + memset(isp, 0, nbytes); + + show_version(); + + /* register the device */ + ret_val = -ENXIO; +/* + i = maj; +*/ + if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0) + { + printk("Unable to register major %d for the Infineon SSC\n", maj); + if (maj == 0){ + goto errout; + } + else{ + maj = 0; + if ((i = register_chrdev(maj, "ssc", &ifx_ssc_fops)) < 0) + { + printk("Unable to register major %d for the Infineon SSC\n", maj); + goto errout; + } + } + } + if (maj == 0) maj = i; + //printk("registered major %d for Infineon SSC\n", maj); + + /* set default values in ifx_ssc_port */ + for (i = 0; i < PORT_CNT; i++) { + info = &isp[i]; + info->port_nr = i; + /* default values for the HwOpts */ + info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT; + info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT; + info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT; + info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT; + info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT; + info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK; + info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE; + info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA; + info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY; + info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE; + info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL; + info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH; + info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX; + info->opts.gpoCs = IFX_SSC_DEF_GPO_CS; + info->opts.gpoInv = IFX_SSC_DEF_GPO_INV; + info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE; + info->baud = IFX_SSC_DEF_BAUDRATE; + info->rxbuf = NULL; + info->txbuf = NULL; + /* values specific to SSC1 */ + if (i == 0) { + info->mapbase = AMAZON_SSC_BASE_ADD_0; + // ### TO DO: power management + + // setting interrupt vectors + info->txirq = IFX_SSC_TIR; + info->rxirq = IFX_SSC_RIR; + info->errirq = IFX_SSC_EIR; +/* + info->frmirq = IFX_SSC_FIR; +*/ + } + /* activate SSC */ + /* CLC.DISS = 0 */ + WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC); + +// ### TO DO: multiple instances + + init_waitqueue_head(&info->rwait); + //init_waitqueue_head(&info->pwait); + + local_irq_save(flags); + + // init serial framing register + WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON); + + /* try to get the interrupts */ + // ### TO DO: interrupt handling with multiple instances + ret_val = ifx_int_wrapper.request(info->txirq, ifx_ssc_tx_int, + 0, "ifx_ssc_tx", info); + if (ret_val){ + printk("%s: unable to get irq %d\n", __FUNCTION__, + info->txirq); + local_irq_restore(flags); + goto errout; + } + ret_val = ifx_int_wrapper.request(info->rxirq, ifx_ssc_rx_int, + 0, "ifx_ssc_rx", info); + if (ret_val){ + printk("%s: unable to get irq %d\n", __FUNCTION__, + info->rxirq); + local_irq_restore(flags); + goto irqerr; + } + ret_val = ifx_int_wrapper.request(info->errirq, ifx_ssc_err_int, + 0, "ifx_ssc_err", info); + if (ret_val){ + printk("%s: unable to get irq %d\n", __FUNCTION__, + info->errirq); + local_irq_restore(flags); + goto irqerr; + } +/* + ret_val = ifx_int_wrapper.request(info->frmirq, ifx_ssc_frm_int, + 0, "ifx_ssc_frm", info); + if (ret_val){ + printk("%s: unable to get irq %d\n", __FUNCTION__, + info->frmirq); + local_irq_restore(flags); + goto irqerr; + } + +*/ + WRITE_PERIPHERAL_REGISTER(IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN); + + local_irq_restore(flags); + } // for (i = 0; i < PORT_CNT; i++) + + /* init the SSCs with default values */ + for (i = 0; i < PORT_CNT; i++) + { + info = &isp[i]; + if (ifx_ssc_hwinit(info) < 0) + { + printk("%s: hardware init failed for port %d\n", + __FUNCTION__, i); + goto irqerr; + } + } + + /* register /proc read handler */ + // ### TO DO: multiple instances + /* for SSC1, which is always present */ + create_proc_read_entry("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL); + return 0; + +irqerr: + // ### TO DO: multiple instances + ifx_int_wrapper.free(isp[0].txirq,&isp[0]); + ifx_int_wrapper.free(isp[0].rxirq,&isp[0]); + ifx_int_wrapper.free(isp[0].errirq,&isp[0]); +/* + ifx_int_wrapper.free(isp[0].frmirq, &isp[0]); +*/ +errout: + /* free up any allocated memory in the error case */ + kfree(isp); + return (ret_val); +} /* ifx_ssc_init */ + + +void +ifx_ssc_cleanup_module(void) +{ + int i; + + /* free up any allocated memory */ + for (i = 0; i < PORT_CNT; i++) + { + /* disable the SSC */ + WRITE_PERIPHERAL_REGISTER(IFX_SSC_WHBSTATE_CLR_ENABLE,isp[i].mapbase + IFX_SSC_WHBSTATE); + /* free the interrupts */ + ifx_int_wrapper.free(isp[i].txirq, &isp[i]); + ifx_int_wrapper.free(isp[i].rxirq, &isp[i]); + ifx_int_wrapper.free(isp[i].errirq, &isp[i]); +/* + ifx_int_wrapper.free(isp[i].frmirq, &isp[i]); + + if (isp[i].rxbuf != NULL) + kfree(isp[i].rxbuf); + if (isp[i].txbuf != NULL) + kfree(isp[i].txbuf); +*/ + } + kfree(isp); + /* unregister the device */ + if (unregister_chrdev(maj, "ssc")) + { + printk("Unable to unregister major %d for the SSC\n", maj); + } + /* delete /proc read handler */ + remove_proc_entry("driver/ssc1", NULL); + remove_proc_entry("driver/ssc2", NULL); +} /* ifx_ssc_cleanup_module */ + +module_exit(ifx_ssc_cleanup_module); + +/* Module entry-points */ +module_init(ifx_ssc_init); + +#ifndef MODULE +static int __init +ifx_ssc_set_maj(char *str) +{ + maj = simple_strtol(str, NULL, 0); + return 1; +} +__setup("ssc_maj=", ifx_ssc_set_maj); +#endif /* !MODULE */ + +#define AMAZON_SSC_EMSG(fmt,arg...) printk("%s: "fmt,__FUNCTION__, ##arg) +/* Brief: chip select enable + */ +inline int amazon_ssc_cs_low(u32 pin) +{ + int ret=0; + if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_CLR, (unsigned long)&pin))){ + AMAZON_SSC_EMSG("clear CS %d fails\n",pin); + } + wmb(); + return ret; +} +EXPORT_SYMBOL(amazon_ssc_cs_low); +/* Brief: chip select disable + */ +inline int amazon_ssc_cs_high(u32 pin) +{ + int ret=0; + if ((ret=ifx_ssc_ioctl((struct inode *)0, NULL,IFX_SSC_GPO_OUT_SET, (unsigned long)&pin))){ + AMAZON_SSC_EMSG("set CS %d fails\n", pin); + } + wmb(); + return ret; +} +EXPORT_SYMBOL(amazon_ssc_cs_high); +/* Brief: one SSC session + * Parameter: + * tx_buf + * tx_len + * rx_buf + * rx_len + * session_mode: IFX_SSC_MODE_RXTX or IFX_SSC_MODE_TX + * Return: >=0 number of bytes received (if rx_buf != 0) or transmitted + * <0 error code + * Description: + * 0. copy data to internal buffer + * 1. Write command + * 2a. If SSC_SESSION_MODE_TXONLY, read tx_len data + * 2b. If not Read back (tx_len + rx_len) data + * 3. copy internal buffer to rx buf if necessary + */ +static int ssc_session(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len) +{ + int ret=0; + + char * ssc_tx_buf=NULL; + char * ssc_rx_buf=NULL; + +// volatile char ssc_tx_buf[128]={0}; +// volatile char ssc_rx_buf[128]={0}; + + int eff_size=0; + u8 mode=0; + + if (tx_buf == NULL && tx_len ==0 && rx_buf == NULL && rx_len == 0){ + AMAZON_SSC_EMSG("invalid parameters\n"); + ret=-EINVAL; + goto ssc_session_exit; + }else if (tx_buf == NULL || tx_len == 0){ + if (rx_buf != NULL && rx_len != 0){ + mode = IFX_SSC_MODE_RX; + }else{ + AMAZON_SSC_EMSG("invalid parameters\n"); + ret=-EINVAL; + goto ssc_session_exit; + } + }else if (rx_buf == NULL || rx_len ==0){ + if (tx_buf != NULL && tx_len != 0){ + mode = IFX_SSC_MODE_TX; + }else{ + AMAZON_SSC_EMSG("invalid parameters\n"); + ret=-EINVAL; + goto ssc_session_exit; + } + }else{ + mode = IFX_SSC_MODE_RXTX; + } + + if (mode == IFX_SSC_MODE_RXTX){ + eff_size = tx_len + rx_len; + }else if (mode == IFX_SSC_MODE_RX){ + eff_size = rx_len; + }else{ + eff_size = tx_len; + } + + //4 bytes alignment, required by driver + /* change by TaiCheng */ + //if (in_irq()){ + if (1){ + ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC); + ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_ATOMIC); + }else{ + ssc_tx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL); + ssc_rx_buf = (char*) kmalloc(sizeof(char) * ((eff_size + 3) & (~3)), GFP_KERNEL); + } + if (ssc_tx_buf == NULL || ssc_rx_buf == NULL){ + AMAZON_SSC_EMSG("no memory for size of %d\n", eff_size); + ret = -ENOMEM; + goto ssc_session_exit; + } + memset((void*)ssc_tx_buf, 0, eff_size); + memset((void*)ssc_rx_buf, 0, eff_size); + + if (tx_len>0){ + memcpy(ssc_tx_buf, tx_buf, tx_len); + } + + ret=ifx_ssc_kwrite(0, ssc_tx_buf, eff_size); + + if (ret > 0) { + ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite + } + + if ( ret != eff_size ){ + AMAZON_SSC_EMSG("ifx_ssc_write return %d\n",ret); + goto ssc_session_exit; + } + ret=ifx_ssc_kread(0, ssc_rx_buf,eff_size); + if ( ret != eff_size ){ + AMAZON_SSC_EMSG("ifx_ssc_read return %d\n",ret); + goto ssc_session_exit; + } + + memcpy(rx_buf, ssc_rx_buf+tx_len, rx_len); + + if (mode == IFX_SSC_MODE_TX) { + ret = tx_len; + }else{ + ret = rx_len; + } +ssc_session_exit: + + if (ssc_tx_buf != NULL) kfree(ssc_tx_buf); + if (ssc_rx_buf != NULL) kfree(ssc_rx_buf); + + if (ret<0) { + printk("ssc session fails\n"); + } + return ret; +} +/* Brief: TX-RX session + * Parameter: + * tx_buf + * tx_len + * rx_buf + * rx_len + * Return: >=0 number of bytes received + * <0 error code + * Description: + * 1. TX session + * 2. RX session + */ +int amazon_ssc_txrx(char * tx_buf, u32 tx_len, char * rx_buf, u32 rx_len) +{ + return ssc_session(tx_buf,tx_len,rx_buf,rx_len); +} +EXPORT_SYMBOL(amazon_ssc_txrx); +/* Brief: TX only session + * Parameter: + * tx_buf + * tx_len + * Return: >=0 number of bytes transmitted + * <0 error code + */ +int amazon_ssc_tx(char * tx_buf, u32 tx_len) +{ + return ssc_session(tx_buf,tx_len,NULL,0); +} +EXPORT_SYMBOL(amazon_ssc_tx); +/* Brief: RX only session + * Parameter: + * rx_buf + * rx_len + * Return: >=0 number of bytes received + * <0 error code + */ +int amazon_ssc_rx(char * rx_buf, u32 rx_len) +{ + return ssc_session(NULL,0,rx_buf,rx_len); +} +EXPORT_SYMBOL(amazon_ssc_rx); + diff --git a/target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c b/target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c new file mode 100644 index 0000000000..3c58d2fea8 --- /dev/null +++ b/target/linux/amazon/files/drivers/char/watchdog/amazon_wdt.c @@ -0,0 +1,246 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright 2004 Wu Qi Ming + * Copyright (C) 2007 John Crispin + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "AMAZON WDT:" + +#undef AMAZON_WDT_DEBUG + +extern unsigned int amazon_get_fpi_hz(void); +static int amazon_wdt_isopen = 0; + +#ifdef AMAZON_WDT_DEBUG +static struct proc_dir_entry* amazon_wdt_dir; +#endif + +int wdt_enable(int timeout) +{ + u32 hard_psw, ffpi; + int reload_value, divider = 1; + + ffpi = amazon_get_fpi_hz(); + + reload_value = 65536 - timeout * ffpi / 256; + + if (reload_value < 0) { + divider = 0; + reload_value = 65536 - timeout * ffpi / 16384; + } + + if (reload_value < 0){ + printk(KERN_INFO DRV_NAME "timeout too large %d\n", timeout); + return -EINVAL; + } + + printk(KERN_INFO DRV_NAME "timeout:%d reload_value: %8x\n", timeout, reload_value); + + hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + + (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; + amazon_writel(hard_psw, AMAZON_WDT_CON0); + wmb(); + + amazon_writel((hard_psw & 0xff00) + (reload_value << 16) + 0xf2, AMAZON_WDT_CON0); + wmb(); + + amazon_writel(divider << 2, AMAZON_WDT_CON1); + wmb(); + + hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + + (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; + amazon_writel(hard_psw, AMAZON_WDT_CON0); + wmb(); + + amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3); + wmb(); + return 0; +} + +void wdt_disable(void) +{ + u32 hard_psw = 0; + + hard_psw = (amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + + (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; + amazon_writel(hard_psw, AMAZON_WDT_CON0); + wmb(); + + amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf2); + wmb(); + + amazon_writel_masked(AMAZON_WDT_CON1, 0x8, 0x8); + wmb(); + + hard_psw=(amazon_readl(AMAZON_WDT_CON0) & 0xffffff01) + + (amazon_readl(AMAZON_WDT_CON1) & 0xc) + 0xf0; + amazon_writel(hard_psw, AMAZON_WDT_CON0); + wmb(); + + amazon_writel_masked(AMAZON_WDT_CON0, 0xff, 0xf3); + wmb(); + + return; +} + +static int wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) +{ + int result=0; + static int timeout=-1; + + switch(cmd){ + case AMAZON_WDT_IOC_START: + printk(KERN_INFO DRV_NAME "enable watch dog timer!\n"); + if (copy_from_user((void*)&timeout, (void*)arg, sizeof (int))) { + printk(KERN_INFO DRV_NAME "invalid argument\n"); + result=-EINVAL; + } else if ((result = wdt_enable(timeout)) < 0) { + timeout = -1; + } + break; + + case AMAZON_WDT_IOC_STOP: + printk(KERN_INFO DRV_NAME "disable watch dog timer\n"); + timeout = -1; + wdt_disable(); + break; + + case AMAZON_WDT_IOC_PING: + if (timeout < 0) { + result = -EIO; + } else { + result = wdt_enable(timeout); + } + break; + + default: + result=-EINVAL; + break; + } + return result; +} + +static ssize_t wdt_read(struct file *file, char *buf, size_t count, loff_t *offset) +{ + return 0; +} + +static ssize_t wdt_write(struct file *file, const char *buf, size_t count, loff_t *offset) +{ + return count; +} + +static int wdt_open(struct inode *inode, struct file *file) +{ + if (amazon_wdt_isopen == 1) + return -EBUSY; + + amazon_wdt_isopen = 1; + printk(KERN_INFO DRV_NAME "opened\n"); + return 0; +} + +static int wdt_release(struct inode *inode, struct file *file) +{ + amazon_wdt_isopen = 0; + printk(KERN_INFO DRV_NAME "closed\n"); + return 0; +} + +#ifdef AMAZON_WDT_DEBUG +int wdt_register_proc_read(char *buf, char **start, off_t offset, + int count, int *eof, void *data) +{ + int len=0; + len+=sprintf(buf+len,"NMISR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_NMISR)); + len+=sprintf(buf+len,"RST_REQ: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_REQ)); + len+=sprintf(buf+len,"RST_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_RST_SR)); + len+=sprintf(buf+len,"WDT_CON0: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON0)); + len+=sprintf(buf+len,"WDT_CON1: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_CON1)); + len+=sprintf(buf+len,"WDT_SR: 0x%08x\n",AMAZON_WDT_REG32(AMAZON_WDT_SR)); + *eof = 1; + return len; +} +#endif + +static struct file_operations wdt_fops = { + read: wdt_read, + write: wdt_write, + ioctl: wdt_ioctl, + open: wdt_open, + release: wdt_release, +}; + +int __init amazon_wdt_init_module(void) +{ + int result = result = register_chrdev(0, "watchdog", &wdt_fops); + + if (result < 0) { + printk(KERN_INFO DRV_NAME "cannot register device\n"); + return result; + } + +#ifdef AMAZON_WDT_DEBUG + amazon_wdt_dir=proc_mkdir("amazon_wdt",NULL); + create_proc_read_entry("wdt_register", 0, amazon_wdt_dir, + wdt_register_proc_read, NULL); +#endif + + amazon_wdt_isopen=0; + printk(KERN_INFO DRV_NAME "driver loaded but inactive"); + return 0; +} + +void amazon_wdt_cleanup_module(void) +{ + unregister_chrdev(0, "watchdog"); +#ifdef AMAZON_WDT_DEBUG + remove_proc_entry("wdt_register", amazon_wdt_dir); + remove_proc_entry("amazon_wdt", NULL); +#endif + printk(KERN_INFO DRV_NAME "unregistered"); + return; +} + +MODULE_LICENSE ("GPL"); +MODULE_AUTHOR("Infineon / John Crispin "); +MODULE_DESCRIPTION("AMAZON WDT driver"); + +module_init(amazon_wdt_init_module); +module_exit(amazon_wdt_cleanup_module); + diff --git a/target/linux/amazon/files/drivers/mtd/maps/amazon.c b/target/linux/amazon/files/drivers/mtd/maps/amazon.c new file mode 100644 index 0000000000..3e7dc4f583 --- /dev/null +++ b/target/linux/amazon/files/drivers/mtd/maps/amazon.c @@ -0,0 +1,166 @@ +/* + * Handle mapping of the flash memory access routines + * on Amazon based devices. + * + * Copyright(C) 2004 peng.liu@infineon.com + * + * This code is GPLed + * + */ +// 000005:fchang 2005/6/2 Modified by Bingtao to double check if the EBU is enabled/disabled +// 506231:tc.chen 2005/06/23 increase firmware partition size form 192KB to 256KB +// 050701:linmars 2005/07/01 fix flash size wrong alignment after increase firmware partition +// 165001:henryhsu 2005/8/18 Remove the support for Intel flash because of 2.1 not enough rootfs partition size +// 165001:henryhsu 2005/9/7 Rolback to support INtel flash +// 509071:tc.chen 2005/09/07 Reduced flash writing time +// 511046:linmars 2005/11/04 change bootloader size from 128 into 64 +// 511241:linmars 2005/11/24 merge TaiChen's IRM patch + +// copyright 2005 infineon + +// copyright 2007 john crispin +// copyright 2007 felix fietkau + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define AMAZON_PCI_ARB_CTL_ALT 0xb100205c +#define AMAZON_MTD_REG32( addr ) (*(volatile u32 *)(addr)) + + +static struct map_info amazon_map = { + .name = "AMAZON_FLASH", + .bankwidth = 2, + .size = 0x400000, +}; + +static map_word amazon_read16(struct map_info * map, unsigned long ofs) +{ + map_word temp; + ofs ^= 2; + temp.x[0] = *((__u16 *) (map->virt + ofs)); + return temp; +} + +static void amazon_write16(struct map_info *map, map_word d, unsigned long adr) +{ + adr ^= 2; + *((__u16 *) (map->virt + adr)) = d.x[0]; +} + +void amazon_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + u8 *p; + u8 *to_8; + ssize_t l = len; + from = (unsigned long) (from + map->virt); + p = (u8 *) from; + to_8 = (u8 *) to; + while(len--){ + *to_8++ = *p++; + } +} + +void amazon_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + u8 *p = (u8*) from; + u8 *to_8; + to += (unsigned long) map->virt; + to_8 = (u8*)to; + while(len--){ + *p++ = *to_8++; + } +} + +#define UBOOT_SIZE 0x40000 + +static struct mtd_partition amazon_partitions[3] = { + { + name:"U-Boot", /* U-Boot firmware */ + offset:0x00000000, + size:UBOOT_SIZE , /* 128k */ + }, + { + name:"kernel", /* firmware */ + offset:UBOOT_SIZE, + size:0x00100000, /* 192K */ + }, + { + name:"rootfs", /* default partition */ + offset:0x00200000, + size:0x00200000, + }, +}; + + +unsigned long flash_start = 0x13000000; +unsigned long flash_size = 0x800000; +unsigned long uImage_size = 0x10000d; + +int find_uImage_size(unsigned long start_offset){ + unsigned long temp; + + printk("trying to find uImage and its size\n"); + amazon_copy_from(&amazon_map, &temp, start_offset + 12, 4); + printk("kernel size is %d \n", temp + 0x40); + return temp + 0x40; +} + +int __init init_amazon_mtd(void) +{ + int ret = 0; + struct mtd_info *mymtd = NULL; + struct mtd_partition *parts = NULL; + + *AMAZON_EBU_BUSCON0 = 0x1d7ff; + + amazon_map.read = amazon_read16; + amazon_map.write = amazon_write16; + amazon_map.copy_from = amazon_copy_from; + amazon_map.copy_to = amazon_copy_to; + + amazon_map.phys = flash_start; + amazon_map.virt = ioremap_nocache(flash_start, flash_size); + + if (!amazon_map.virt) { + printk(KERN_WARNING "Failed to ioremap!\n"); + return -EIO; + } + + mymtd = (struct mtd_info *) do_map_probe("cfi_probe", &amazon_map); + if (!mymtd) { + iounmap(amazon_map.virt); + printk("probing failed\n"); + return -ENXIO; + } + + mymtd->owner = THIS_MODULE; + parts = &amazon_partitions[0]; + amazon_partitions[2].offset = UBOOT_SIZE + find_uImage_size(amazon_partitions[1].offset); + amazon_partitions[1].size = mymtd->size - amazon_partitions[1].offset - (2 * mymtd->erasesize); + amazon_partitions[2].size = mymtd->size - amazon_partitions[2].offset - (2 * mymtd->erasesize); + add_mtd_partitions(mymtd, parts, 3); + return 0; +} + +static void __exit cleanup_amazon_mtd(void) +{ + /* FIXME! */ +} + +module_init(init_amazon_mtd); +module_exit(cleanup_amazon_mtd); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("john crispin blogic@openwrt.org"); +MODULE_DESCRIPTION("MTD map driver for AMAZON boards"); diff --git a/target/linux/amazon/files/drivers/net/amazon_sw.c b/target/linux/amazon/files/drivers/net/amazon_sw.c new file mode 100644 index 0000000000..d19db6e36d --- /dev/null +++ b/target/linux/amazon/files/drivers/net/amazon_sw.c @@ -0,0 +1,876 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ +//----------------------------------------------------------------------- +/* + * Description: + * Driver for Infineon Amazon 3 port switch + */ +//----------------------------------------------------------------------- +/* Author: Wu Qi Ming[Qi-Ming.Wu@infineon.com] + * Created: 7-April-2004 + */ +//----------------------------------------------------------------------- +/* History + * Changed on: Jun 28, 2004 + * Changed by: peng.liu@infineon.com + * Reason: add hardware flow control (HFC) (CONFIG_NET_HW_FLOWCONTROL) + * + * Changed on: Apr 6, 2005 + * Changed by: mars.lin@infineon.com + * Reason : supoort port identification + */ + + +// copyright 2004-2005 infineon.com + +// copyright 2007 john crispin +// copyright 2007 felix fietkau + + +// TODO +// port vlan code from bcrm target... the tawainese code was scrapped due to crappyness +// check all the mmi reg settings and possibly document them better +// verify the ethtool code +// remove the while(1) stuff +// further clean up and rework ... but it works for now +// check the mode[]=bridge stuff +// verify that the ethaddr can be set from u-boot + + +#ifndef __KERNEL__ +#define __KERNEL__ +#endif + + +#if defined(CONFIG_MODVERSIONS) && !defined(MODVERSIONS) +#define MODVERSIONS +#endif + +#if defined(MODVERSIONS) && !defined(__GENKSYMS__) +#include +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +// how many mii ports are there ? +#define AMAZON_SW_INT_NO 2 + +#define ETHERNET_PACKET_DMA_BUFFER_SIZE 1536 + +/***************************************** Module Parameters *************************************/ +char mode[] = "bridge"; +module_param_array(mode, charp, NULL, 0); + +static int timeout = 1 * HZ; +module_param(timeout, int, 0); + +int switch_init(struct net_device *dev); +void switch_tx_timeout(struct net_device *dev); + +struct net_device switch_devs[2] = { + {init:switch_init,}, + {init:switch_init,} +}; + +int add_mac_table_entry(u64 entry_value) +{ + int i; + u32 data1, data2; + + AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = ~7; + + for (i = 0; i < 32; i++) { + AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | i; + while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; + data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1); + data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2); + if ((data1 & (0x00700000)) != 0x00700000) + continue; + AMAZON_SW_REG32(AMAZON_SW_DATA1) = (u32) (entry_value >> 32); + AMAZON_SW_REG32(AMAZON_SW_DATA2) = (u32) entry_value & 0xffffffff; + AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | i; + while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; + break; + } + AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) |= 7; + if (i >= 32) + return -1; + return OK; +} + +u64 read_mac_table_entry(int index) +{ + u32 data1, data2; + u64 value; + AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0x80000000 | 0x20 | index; + while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; + data1 = AMAZON_SW_REG32(AMAZON_SW_DATA1) & 0xffffff; + data2 = AMAZON_SW_REG32(AMAZON_SW_DATA2); + value = (u64) data1 << 32 | (u64) data2; + return value; +} + +int write_mac_table_entry(int index, u64 value) +{ + u32 data1, data2; + data1 = (u32) (value >> 32); + data2 = (u32) value & 0xffffffff; + AMAZON_SW_REG32(AMAZON_SW_DATA1) = data1; + AMAZON_SW_REG32(AMAZON_SW_DATA2) = data2; + AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) = 0xc0000020 | index; + while (AMAZON_SW_REG32(AMAZON_SW_CPU_ACTL) & (0x80000000)) {}; + return OK; +} + +u32 get_mdio_reg(int phy_addr, int reg_num) +{ + u32 value; + AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (3 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16); + while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {}; + value = AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & 0xffff; + return value; +} + +int set_mdio_reg(int phy_addr, int reg_num, u32 value) +{ + AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = (2 << 30) | ((phy_addr & 0x1f) << 21) | ((reg_num & 0x1f) << 16) | (value & 0xffff); + while (AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) & (1 << 31)) {}; + return OK; +} + +int auto_negotiate(int phy_addr) +{ + u32 value = 0; + value = get_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG); + set_mdio_reg(phy_addr, MDIO_BASE_CONTROL_REG, (value | RESTART_AUTO_NEGOTIATION | AUTO_NEGOTIATION_ENABLE | PHY_RESET)); + return OK; +} + +/* + In this version of switch driver, we split the dma channels for the switch. + 2 for port0 and 2 for port1. So that we can do internal bridging if necessary. + In switch mode, packets coming in from port0 or port1 is able to do Destination + address lookup. Packets coming from port0 with destination address of port1 should + not go to pmac again. The switch hardware should be able to do the switch in the hard + ware level. Packets coming from the pmac should not do the DA look up in that the + desination is already known for the kernel. It only needs to go to the correct NIC to + find its way out. + */ +int amazon_sw_chip_init(void) +{ + u32 tmp1; + int i = 0; + + /* Aging tick select: 5mins */ + tmp1 = 0xa0; + if (strcmp(mode, "bridge") == 0) { + // bridge mode, set militarised mode to 1, no learning! + tmp1 |= 0xC00; + } else { + // enable learning for P0 and P1, + tmp1 |= 3; + } + + /* unknown broadcast/multicast/unicast to all ports */ + AMAZON_SW_REG32(AMAZON_SW_UN_DEST) = 0x1ff; + + AMAZON_SW_REG32(AMAZON_SW_ARL_CTL) = tmp1; + + /* OCS:1 set OCS bit, split the two NIC in rx direction EDL:1 (enable DA lookup) */ +#if defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT) || defined(CONFIG_IFX_NFEXT_AMAZON_SWITCH_PHYPORT_MODULE) + AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x700; +#else + AMAZON_SW_REG32(AMAZON_SW_P2_PCTL) = 0x401; +#endif + + /* EPC: 1 split the two NIC in tx direction CRC is generated */ + AMAZON_SW_REG32(AMAZON_SW_P2_CTL) = 0x6; + + // for bi-directional + AMAZON_SW_REG32(AMAZON_SW_P0_WM) = 0x14141412; + AMAZON_SW_REG32(AMAZON_SW_P1_WM) = 0x14141412; + AMAZON_SW_REG32(AMAZON_SW_P2_WM) = 0x28282826; + AMAZON_SW_REG32(AMAZON_SW_GBL_WM) = 0x0; + + AMAZON_SW_REG32(AMAZON_CGU_PLL0SR) = (AMAZON_SW_REG32(AMAZON_CGU_PLL0SR)) | 0x58000000; + // clock for PHY + AMAZON_SW_REG32(AMAZON_CGU_IFCCR) = (AMAZON_SW_REG32(AMAZON_CGU_IFCCR)) | 0x80000004; + // enable power for PHY + AMAZON_SW_REG32(AMAZON_PMU_PWDCR) = (AMAZON_SW_REG32(AMAZON_PMU_PWDCR)) | AMAZON_PMU_PWDCR_EPHY; + // set reverse MII, enable MDIO statemachine + AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG) = 0x800027bf; + while (1) + if (((AMAZON_SW_REG32(AMAZON_SW_MDIO_CFG)) & 0x80000000) == 0) + break; + AMAZON_SW_REG32(AMAZON_SW_EPHY) = 0xff; + + // auto negotiation + AMAZON_SW_REG32(AMAZON_SW_MDIO_ACC) = 0x83e08000; + auto_negotiate(0x1f); + + /* enable all ports */ + AMAZON_SW_REG32(AMAZON_SW_PS_CTL) = 0x7; + for (i = 0; i < 32; i++) + write_mac_table_entry(i, 1 << 50); + return 0; +} + +static unsigned char my_ethaddr[MAX_ADDR_LEN]; +/* need to get the ether addr from u-boot */ +static int __init ethaddr_setup(char *line) +{ + char *ep; + int i; + + memset(my_ethaddr, 0, MAX_ADDR_LEN); + for (i = 0; i < 6; i++) { + my_ethaddr[i] = line ? simple_strtoul(line, &ep, 16) : 0; + if (line) + line = (*ep) ? ep + 1 : ep; + } + printk("mac address %2x-%2x-%2x-%2x-%2x-%2x \n", my_ethaddr[0], my_ethaddr[1], my_ethaddr[2], my_ethaddr[3], my_ethaddr[4], my_ethaddr[5]); + return 0; +} + +__setup("ethaddr=", ethaddr_setup); + +static void open_rx_dma(struct net_device *dev) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + struct dma_device_info *dma_dev = priv->dma_device; + int i; + + for (i = 0; i < dma_dev->num_rx_chan; i++) + dma_dev->rx_chan[i].control = 1; + dma_device_update_rx(dma_dev); +} + +#ifdef CONFIG_NET_HW_FLOWCONTROL +static void close_rx_dma(struct net_device *dev) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + struct dma_device_info *dma_dev = priv->dma_device; + int i; + + for (i = 0; i < dma_dev->num_rx_chan; i++) + dma_dev->rx_chan[i].control = 0; + dma_device_update_rx(dma_dev); +} + +void amazon_xon(struct net_device *dev) +{ + unsigned long flag; + local_irq_save(flag); + open_rx_dma(dev); + local_irq_restore(flag); +} +#endif + +int switch_open(struct net_device *dev) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + if (!strcmp(dev->name, "eth1")) { + priv->mdio_phy_addr = PHY0_ADDR; + } + open_rx_dma(dev); + +#ifdef CONFIG_NET_HW_FLOWCONTROL + if ((priv->fc_bit = netdev_register_fc(dev, amazon_xon)) == 0) { + printk("Hardware Flow Control register fails\n"); + } +#endif + + netif_start_queue(dev); + return OK; +} + +int switch_release(struct net_device *dev) +{ + int i; + struct switch_priv *priv = (struct switch_priv *) dev->priv; + struct dma_device_info *dma_dev = priv->dma_device; + + for (i = 0; i < dma_dev->num_tx_chan; i++) + dma_dev->tx_chan[i].control = 0; + for (i = 0; i < dma_dev->num_rx_chan; i++) + dma_dev->rx_chan[i].control = 0; + + dma_device_update(dma_dev); + +#ifdef CONFIG_NET_HW_FLOWCONTROL + if (priv->fc_bit) { + netdev_unregister_fc(priv->fc_bit); + } +#endif + netif_stop_queue(dev); + + return OK; +} + + +void switch_rx(struct net_device *dev, int len, struct sk_buff *skb) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; +#ifdef CONFIG_NET_HW_FLOWCONTROL + int mit_sel = 0; +#endif + skb->dev = dev; + skb->protocol = eth_type_trans(skb, dev); + +#ifdef CONFIG_NET_HW_FLOWCONTROL + mit_sel = netif_rx(skb); + switch (mit_sel) { + case NET_RX_SUCCESS: + case NET_RX_CN_LOW: + case NET_RX_CN_MOD: + break; + case NET_RX_CN_HIGH: + break; + case NET_RX_DROP: + if ((priv->fc_bit) + && (!test_and_set_bit(priv->fc_bit, &netdev_fc_xoff))) { + close_rx_dma(dev); + } + break; + } +#else + netif_rx(skb); +#endif + priv->stats.rx_packets++; + priv->stats.rx_bytes += len; + return; +} + +int asmlinkage switch_hw_tx(char *buf, int len, struct net_device *dev) +{ + struct switch_priv *priv = dev->priv; + struct dma_device_info *dma_dev = priv->dma_device; + + dma_dev->current_tx_chan = 0; + return dma_device_write(dma_dev, buf, len, priv->skb); +} + +int asmlinkage switch_tx(struct sk_buff *skb, struct net_device *dev) +{ + int len; + char *data; + struct switch_priv *priv = (struct switch_priv *) dev->priv; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + data = skb->data; + priv->skb = skb; + dev->trans_start = jiffies; + + if (switch_hw_tx(data, len, dev) != len) { + dev_kfree_skb_any(skb); + return OK; + } + + priv->stats.tx_packets++; + priv->stats.tx_bytes += len; + return OK; +} + +void switch_tx_timeout(struct net_device *dev) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + priv->stats.tx_errors++; + netif_wake_queue(dev); + return; +} + +void negotiate(struct net_device *dev) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + unsigned short data = get_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG); + + data &= ~(MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD); + + switch (priv->current_speed_selection) { + case 10: + if (priv->current_duplex == full) + data |= MDIO_ADVERT_10_FD; + else if (priv->current_duplex == half) + data |= MDIO_ADVERT_10_HD; + else + data |= MDIO_ADVERT_10_HD | MDIO_ADVERT_10_FD; + break; + + case 100: + if (priv->current_duplex == full) + data |= MDIO_ADVERT_100_FD; + else if (priv->current_duplex == half) + data |= MDIO_ADVERT_100_HD; + else + data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD; + break; + + case 0: /* Auto */ + if (priv->current_duplex == full) + data |= MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD; + else if (priv->current_duplex == half) + data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_10_HD; + else + data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD; + break; + + default: /* assume autoneg speed and duplex */ + data |= MDIO_ADVERT_100_HD | MDIO_ADVERT_100_FD | MDIO_ADVERT_10_FD | MDIO_ADVERT_10_HD; + } + + set_mdio_reg(priv->mdio_phy_addr, MDIO_ADVERTISMENT_REG, data); + + /* Renegotiate with link partner */ + + data = get_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG); + data |= MDIO_BC_NEGOTIATE; + + set_mdio_reg(priv->mdio_phy_addr, MDIO_BASE_CONTROL_REG, data); + +} + + +void set_duplex(struct net_device *dev, enum duplex new_duplex) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + if (new_duplex != priv->current_duplex) { + priv->current_duplex = new_duplex; + negotiate(dev); + } +} + +void set_speed(struct net_device *dev, unsigned long speed) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + priv->current_speed_selection = speed; + negotiate(dev); +} + +static int switch_ethtool_ioctl(struct net_device *dev, struct ifreq *ifr) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + struct ethtool_cmd ecmd; + + if (copy_from_user(&ecmd, ifr->ifr_data, sizeof(ecmd))) + return -EFAULT; + + switch (ecmd.cmd) { + case ETHTOOL_GSET: + memset((void *) &ecmd, 0, sizeof(ecmd)); + ecmd.supported = SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full; + ecmd.port = PORT_TP; + ecmd.transceiver = XCVR_EXTERNAL; + ecmd.phy_address = priv->mdio_phy_addr; + + ecmd.speed = priv->current_speed; + + ecmd.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF; + + ecmd.advertising = ADVERTISED_TP; + if (priv->current_duplex == autoneg && priv->current_speed_selection == 0) + ecmd.advertising |= ADVERTISED_Autoneg; + else { + ecmd.advertising |= ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full; + if (priv->current_speed_selection == 10) + ecmd.advertising &= ~(ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full); + else if (priv->current_speed_selection == 100) + ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full); + if (priv->current_duplex == half) + ecmd.advertising &= ~(ADVERTISED_10baseT_Full | ADVERTISED_100baseT_Full); + else if (priv->current_duplex == full) + ecmd.advertising &= ~(ADVERTISED_10baseT_Half | ADVERTISED_100baseT_Half); + } + ecmd.autoneg = AUTONEG_ENABLE; + if (copy_to_user(ifr->ifr_data, &ecmd, sizeof(ecmd))) + return -EFAULT; + break; + + case ETHTOOL_SSET: + if (!capable(CAP_NET_ADMIN)) { + return -EPERM; + } + if (ecmd.autoneg == AUTONEG_ENABLE) { + set_duplex(dev, autoneg); + set_speed(dev, 0); + } else { + set_duplex(dev, ecmd.duplex == DUPLEX_HALF ? half : full); + set_speed(dev, ecmd.speed == SPEED_10 ? 10 : 100); + } + break; + + case ETHTOOL_GDRVINFO: + { + struct ethtool_drvinfo info; + memset((void *) &info, 0, sizeof(info)); + strncpy(info.driver, "AMAZONE", sizeof(info.driver) - 1); + strncpy(info.fw_version, "N/A", sizeof(info.fw_version) - 1); + strncpy(info.bus_info, "N/A", sizeof(info.bus_info) - 1); + info.regdump_len = 0; + info.eedump_len = 0; + info.testinfo_len = 0; + if (copy_to_user(ifr->ifr_data, &info, sizeof(info))) + return -EFAULT; + } + break; + case ETHTOOL_NWAY_RST: + if (priv->current_duplex == autoneg && priv->current_speed_selection == 0) + negotiate(dev); + break; + default: + return -EOPNOTSUPP; + break; + } + return 0; +} + + + +int mac_table_tools_ioctl(struct net_device *dev, struct mac_table_req *req) +{ + int cmd; + int i; + cmd = req->cmd; + switch (cmd) { + case RESET_MAC_TABLE: + for (i = 0; i < 32; i++) { + write_mac_table_entry(i, 0); + } + break; + case READ_MAC_ENTRY: + req->entry_value = read_mac_table_entry(req->index); + break; + case WRITE_MAC_ENTRY: + write_mac_table_entry(req->index, req->entry_value); + break; + case ADD_MAC_ENTRY: + add_mac_table_entry(req->entry_value); + break; + default: + return -EINVAL; + } + + return 0; +} + + +/* + the ioctl for the switch driver is developed in the conventional way + the control type falls into some basic categories, among them, the + SIOCETHTOOL is the traditional eth interface. VLAN_TOOLS and + MAC_TABLE_TOOLS are designed specifically for amazon chip. User + should be aware of the data structures used in these interfaces. +*/ +int switch_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct data_req *switch_data_req = (struct data_req *) ifr->ifr_data; + struct mac_table_req *switch_mac_table_req; + switch (cmd) { + case SIOCETHTOOL: + switch_ethtool_ioctl(dev, ifr); + break; + case SIOCGMIIPHY: /* Get PHY address */ + break; + case SIOCGMIIREG: /* Read MII register */ + break; + case SIOCSMIIREG: /* Write MII register */ + break; + case SET_ETH_SPEED_10: /* 10 Mbps */ + break; + case SET_ETH_SPEED_100: /* 100 Mbps */ + break; + case SET_ETH_SPEED_AUTO: /* Auto negotiate speed */ + break; + case SET_ETH_DUPLEX_HALF: /* Half duplex. */ + break; + case SET_ETH_DUPLEX_FULL: /* Full duplex. */ + break; + case SET_ETH_DUPLEX_AUTO: /* Autonegotiate duplex */ + break; + case SET_ETH_REG: + AMAZON_SW_REG32(switch_data_req->index) = switch_data_req->value; + break; + case MAC_TABLE_TOOLS: + switch_mac_table_req = (struct mac_table_req *) ifr->ifr_data; + mac_table_tools_ioctl(dev, switch_mac_table_req); + break; + default: + return -EINVAL; + } + + return 0; +} + +struct net_device_stats *switch_stats(struct net_device *dev) +{ + struct switch_priv *priv = (struct switch_priv *) dev->priv; + return &priv->stats; +} + +int switch_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu >= 1516) + new_mtu = 1516; + dev->mtu = new_mtu; + return 0; +} + +int switch_hw_receive(struct net_device *dev, struct dma_device_info *dma_dev) +{ + u8 *buf = NULL; + int len = 0; + struct sk_buff *skb = NULL; + + len = dma_device_read(dma_dev, &buf, (void **) &skb); + + if (len >= 0x600) { + printk("packet too large %d\n", len); + goto switch_hw_receive_err_exit; + } + + /* remove CRC */ + len -= 4; + if (skb == NULL) { + printk("cannot restore pointer\n"); + goto switch_hw_receive_err_exit; + } + if (len > (skb->end - skb->tail)) { + printk("BUG, len:%d end:%p tail:%p\n", (len + 4), skb->end, skb->tail); + goto switch_hw_receive_err_exit; + } + skb_put(skb, len); + skb->dev = dev; + switch_rx(dev, len, skb); + return OK; + + switch_hw_receive_err_exit: + if (skb) + dev_kfree_skb_any(skb); + return -EIO; +} + +int dma_intr_handler(struct dma_device_info *dma_dev, int status) +{ + struct net_device *dev; + + dev = switch_devs + (u32) dma_dev->priv; + switch (status) { + case RCV_INT: + switch_hw_receive(dev, dma_dev); + break; + case TX_BUF_FULL_INT: + netif_stop_queue(dev); + break; + case TRANSMIT_CPT_INT: + netif_wake_queue(dev); + break; + } + return OK; +} + +/* reserve 2 bytes in front of data pointer*/ +u8 *dma_buffer_alloc(int len, int *byte_offset, void **opt) +{ + u8 *buffer = NULL; + struct sk_buff *skb = NULL; + skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE); + if (skb == NULL) { + return NULL; + } + buffer = (u8 *) (skb->data); + skb_reserve(skb, 2); + *(int *) opt = (int) skb; + *byte_offset = 2; + return buffer; +} + +int dma_buffer_free(u8 * dataptr, void *opt) +{ + struct sk_buff *skb = NULL; + if (opt == NULL) { + kfree(dataptr); + } else { + skb = (struct sk_buff *) opt; + dev_kfree_skb_any(skb); + } + return OK; +} + +int init_dma_device(_dma_device_info * dma_dev) +{ + int i; + int num_tx_chan, num_rx_chan; + if (strcmp(dma_dev->device_name, "switch1") == 0) { + num_tx_chan = 1; + num_rx_chan = 2; + dma_dev->priv = (void *) 0; + } else { + num_tx_chan = 1; + num_rx_chan = 2; + dma_dev->priv = (void *) 1; + } + + dma_dev->weight = 1; + dma_dev->num_tx_chan = num_tx_chan; + dma_dev->num_rx_chan = num_rx_chan; + dma_dev->ack = 1; + dma_dev->tx_burst_len = 4; + dma_dev->rx_burst_len = 4; + for (i = 0; i < dma_dev->num_tx_chan; i++) { + dma_dev->tx_chan[i].weight = QOS_DEFAULT_WGT; + dma_dev->tx_chan[i].desc_num = 10; + dma_dev->tx_chan[i].packet_size = 0; + dma_dev->tx_chan[i].control = 0; + } + for (i = 0; i < num_rx_chan; i++) { + dma_dev->rx_chan[i].weight = QOS_DEFAULT_WGT; + dma_dev->rx_chan[i].desc_num = 10; + dma_dev->rx_chan[i].packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE; + dma_dev->rx_chan[i].control = 0; + } + dma_dev->intr_handler = dma_intr_handler; + dma_dev->buffer_alloc = dma_buffer_alloc; + dma_dev->buffer_free = dma_buffer_free; + return 0; +} + +int switch_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + return OK; +} + + +int switch_init(struct net_device *dev) +{ + u64 retval = 0; + int i; + int result; + struct switch_priv *priv; + ether_setup(dev); /* assign some of the fields */ + printk("%s up using ", dev->name); + dev->open = switch_open; + dev->stop = switch_release; + dev->hard_start_xmit = switch_tx; + dev->do_ioctl = switch_ioctl; + dev->get_stats = switch_stats; + dev->change_mtu = switch_change_mtu; + dev->set_mac_address = switch_set_mac_address; + dev->tx_timeout = switch_tx_timeout; + dev->watchdog_timeo = timeout; + + SET_MODULE_OWNER(dev); + + dev->priv = kmalloc(sizeof(struct switch_priv), GFP_KERNEL); + if (dev->priv == NULL) + return -ENOMEM; + memset(dev->priv, 0, sizeof(struct switch_priv)); + priv = dev->priv; + priv->dma_device = (struct dma_device_info *) kmalloc(sizeof(struct dma_device_info), GFP_KERNEL); + if ((dev - switch_devs) == 0) { + sprintf(priv->dma_device->device_name, "switch1"); + } else if ((dev - switch_devs) == 1) { + sprintf(priv->dma_device->device_name, "switch2"); + } + printk("\"%s\"\n", priv->dma_device->device_name); + init_dma_device(priv->dma_device); + result = dma_device_register(priv->dma_device); + + /* read the mac address from the mac table and put them into the mac table. */ + for (i = 0; i < 6; i++) { + retval += my_ethaddr[i]; + } + /* ethaddr not set in u-boot ? */ + if (retval == 0) { + dev->dev_addr[0] = 0x00; + dev->dev_addr[1] = 0x20; + dev->dev_addr[2] = 0xda; + dev->dev_addr[3] = 0x86; + dev->dev_addr[4] = 0x23; + dev->dev_addr[5] = 0x74 + (unsigned char) (dev - switch_devs); + } else { + for (i = 0; i < 6; i++) { + dev->dev_addr[i] = my_ethaddr[i]; + } + dev->dev_addr[5] += +(unsigned char) (dev - switch_devs); + } + return OK; +} + +int switch_init_module(void) +{ + int i = 0, result, device_present = 0; + + for (i = 0; i < AMAZON_SW_INT_NO; i++) { + sprintf(switch_devs[i].name, "eth%d", i); + + if ((result = register_netdev(switch_devs + i))) + printk("error %i registering device \"%s\"\n", result, switch_devs[i].name); + else + device_present++; + } + amazon_sw_chip_init(); + return device_present ? 0 : -ENODEV; +} + +void switch_cleanup(void) +{ + int i; + struct switch_priv *priv; + for (i = 0; i < AMAZON_SW_INT_NO; i++) { + priv = switch_devs[i].priv; + if (priv->dma_device) { + dma_device_unregister(priv->dma_device); + kfree(priv->dma_device); + } + kfree(switch_devs[i].priv); + unregister_netdev(switch_devs + i); + } + return; +} + +module_init(switch_init_module); +module_exit(switch_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Wu Qi Ming"); diff --git a/target/linux/amazon/files/drivers/serial/amazon_asc.c b/target/linux/amazon/files/drivers/serial/amazon_asc.c new file mode 100644 index 0000000000..7c17cb0f4a --- /dev/null +++ b/target/linux/amazon/files/drivers/serial/amazon_asc.c @@ -0,0 +1,685 @@ +/* + * Driver for AMAZONASC serial ports + * + * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. + * Based on drivers/serial/serial_s3c2400.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Copyright (C) 2004 Infineon IFAP DC COM CPE + * Copyright (C) 2007 Felix Fietkau + * Copyright (C) 2007 John Crispin + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#define PORT_AMAZONASC 111 + +#include + +#define UART_NR 1 + +#define UART_DUMMY_UER_RX 1 + +#define SERIAL_AMAZONASC_MAJOR TTY_MAJOR +#define CALLOUT_AMAZONASC_MAJOR TTYAUX_MAJOR +#define SERIAL_AMAZONASC_MINOR 64 +#define SERIAL_AMAZONASC_NR UART_NR + +static void amazonasc_tx_chars(struct uart_port *port); +extern void prom_printf(const char * fmt, ...); +static struct uart_port amazonasc_ports[UART_NR]; +static struct uart_driver amazonasc_reg; +static unsigned int uartclk = 0; +extern unsigned int amazon_get_fpi_hz(void); + +static void amazonasc_stop_tx(struct uart_port *port) +{ + /* fifo underrun shuts up after firing once */ + return; +} + +static void amazonasc_start_tx(struct uart_port *port) +{ + unsigned long flags; + + local_irq_save(flags); + amazonasc_tx_chars(port); + local_irq_restore(flags); + + return; +} + +static void amazonasc_stop_rx(struct uart_port *port) +{ + /* clear the RX enable bit */ + amazon_writel(ASCWHBCON_CLRREN, AMAZON_ASC_WHBCON); +} + +static void amazonasc_enable_ms(struct uart_port *port) +{ + /* no modem signals */ + return; +} + +static void +amazonasc_rx_chars(struct uart_port *port) +{ + struct tty_struct *tty = port->info->tty; + unsigned int ch = 0, rsr = 0, fifocnt; + + fifocnt = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_RXFFLMASK; + while (fifocnt--) + { + u8 flag = TTY_NORMAL; + ch = amazon_readl(AMAZON_ASC_RBUF); + rsr = (amazon_readl(AMAZON_ASC_CON) & ASCCON_ANY) | UART_DUMMY_UER_RX; + tty_flip_buffer_push(tty); + port->icount.rx++; + + /* + * Note that the error handling code is + * out of the main execution path + */ + if (rsr & ASCCON_ANY) { + if (rsr & ASCCON_PE) { + port->icount.parity++; + amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRPE, ASCWHBCON_CLRPE); + } else if (rsr & ASCCON_FE) { + port->icount.frame++; + amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLRFE, ASCWHBCON_CLRFE); + } + if (rsr & ASCCON_OE) { + port->icount.overrun++; + amazon_writel_masked(AMAZON_ASC_WHBCON, ASCWHBCON_CLROE, ASCWHBCON_CLROE); + } + + rsr &= port->read_status_mask; + + if (rsr & ASCCON_PE) + flag = TTY_PARITY; + else if (rsr & ASCCON_FE) + flag = TTY_FRAME; + } + + if ((rsr & port->ignore_status_mask) == 0) + tty_insert_flip_char(tty, ch, flag); + + if (rsr & ASCCON_OE) + /* + * Overrun is special, since it's reported + * immediately, and doesn't affect the current + * character + */ + tty_insert_flip_char(tty, 0, TTY_OVERRUN); + } + if (ch != 0) + tty_flip_buffer_push(tty); + + return; +} + + +static void amazonasc_tx_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->info->xmit; + + if (uart_tx_stopped(port)) { + amazonasc_stop_tx(port); + return; + } + + while (((amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK) + >> ASCFSTAT_TXFFLOFF) != AMAZONASC_TXFIFO_FULL) + { + if (port->x_char) { + amazon_writel(port->x_char, AMAZON_ASC_TBUF); + port->icount.tx++; + port->x_char = 0; + continue; + } + + if (uart_circ_empty(xmit)) + break; + + amazon_writel(xmit->buf[xmit->tail], AMAZON_ASC_TBUF); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static irqreturn_t amazonasc_tx_int(int irq, void *port) +{ + amazon_writel(ASC_IRNCR_TIR, AMAZON_ASC_IRNCR1); + amazonasc_start_tx(port); + + /* clear any pending interrupts */ + amazon_writel_masked(AMAZON_ASC_WHBCON, + (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), + (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE)); + + return IRQ_HANDLED; +} + +static irqreturn_t amazonasc_er_int(int irq, void *port) +{ + /* clear any pending interrupts */ + amazon_writel_masked(AMAZON_ASC_WHBCON, + (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE), + (ASCWHBCON_CLRPE | ASCWHBCON_CLRFE | ASCWHBCON_CLROE)); + + return IRQ_HANDLED; +} + +static irqreturn_t amazonasc_rx_int(int irq, void *port) +{ + amazon_writel(ASC_IRNCR_RIR, AMAZON_ASC_IRNCR1); + amazonasc_rx_chars((struct uart_port *) port); + return IRQ_HANDLED; +} + +static u_int amazonasc_tx_empty(struct uart_port *port) +{ + int status; + + /* + * FSTAT tells exactly how many bytes are in the FIFO. + * The question is whether we really need to wait for all + * 16 bytes to be transmitted before reporting that the + * transmitter is empty. + */ + status = amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK; + return status ? 0 : TIOCSER_TEMT; +} + +static u_int amazonasc_get_mctrl(struct uart_port *port) +{ + /* no modem control signals - the readme says to pretend all are set */ + return TIOCM_CTS|TIOCM_CAR|TIOCM_DSR; +} + +static void amazonasc_set_mctrl(struct uart_port *port, u_int mctrl) +{ + /* no modem control - just return */ + return; +} + +static void amazonasc_break_ctl(struct uart_port *port, int break_state) +{ + /* no way to send a break */ + return; +} + +static int amazonasc_startup(struct uart_port *port) +{ + unsigned int con = 0; + unsigned long flags; + int retval; + + /* this assumes: CON.BRS = CON.FDE = 0 */ + if (uartclk == 0) + uartclk = amazon_get_fpi_hz(); + + amazonasc_ports[0].uartclk = uartclk; + + local_irq_save(flags); + + /* this setup was probably already done in u-boot */ + /* ASC and GPIO Port 1 bits 3 and 4 share the same pins + * P1.3 (RX) in, Alternate 10 + * P1.4 (TX) in, Alternate 10 + */ + amazon_writel_masked(AMAZON_GPIO_P1_DIR, 0x18, 0x10); //P1.4 output, P1.3 input + amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL0, 0x18, 0x18); //ALTSETL0 11 + amazon_writel_masked(AMAZON_GPIO_P1_ALTSEL1, 0x18, 0); //ALTSETL1 00 + amazon_writel_masked(AMAZON_GPIO_P1_OD, 0x18, 0x10); + + /* set up the CLC */ + amazon_writel_masked(AMAZON_ASC_CLC, AMAZON_ASC_CLC_DISS, 0); + amazon_writel_masked(AMAZON_ASC_CLC, ASCCLC_RMCMASK, 1 << ASCCLC_RMCOFFSET); + + /* asynchronous mode */ + con = ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_OEN | ASCCON_PEN; + + /* choose the line - there's only one */ + amazon_writel(0, AMAZON_ASC_PISEL); + amazon_writel(((AMAZONASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, + AMAZON_ASC_TXFCON); + amazon_writel(((AMAZONASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, + AMAZON_ASC_RXFCON); + wmb(); + + amazon_writel_masked(AMAZON_ASC_CON, con, con); + + retval = request_irq(AMAZONASC_RIR, amazonasc_rx_int, 0, "asc_rx", port); + if (retval){ + printk("failed to request amazonasc_rx_int\n"); + return retval; + } + retval = request_irq(AMAZONASC_TIR, amazonasc_tx_int, 0, "asc_tx", port); + if (retval){ + printk("failed to request amazonasc_tx_int\n"); + goto err1; + } + + retval = request_irq(AMAZONASC_EIR, amazonasc_er_int, 0, "asc_er", port); + if (retval){ + printk("failed to request amazonasc_er_int\n"); + goto err2; + } + + local_irq_restore(flags); + return 0; + +err2: + free_irq(AMAZONASC_TIR, port); + +err1: + free_irq(AMAZONASC_RIR, port); + local_irq_restore(flags); + return retval; +} + +static void amazonasc_shutdown(struct uart_port *port) +{ + free_irq(AMAZONASC_RIR, port); + free_irq(AMAZONASC_TIR, port); + free_irq(AMAZONASC_EIR, port); + /* + * disable the baudrate generator to disable the ASC + */ + amazon_writel(0, AMAZON_ASC_CON); + + /* flush and then disable the fifos */ + amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFFLU, ASCRXFCON_RXFFLU); + amazon_writel_masked(AMAZON_ASC_RXFCON, ASCRXFCON_RXFEN, 0); + amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFFLU, ASCTXFCON_TXFFLU); + amazon_writel_masked(AMAZON_ASC_TXFCON, ASCTXFCON_TXFEN, 0); +} + +static void amazonasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old) +{ + unsigned int cflag; + unsigned int iflag; + unsigned int baud, quot; + unsigned int con = 0; + unsigned long flags; + + cflag = new->c_cflag; + iflag = new->c_iflag; + + /* byte size and parity */ + switch (cflag & CSIZE) { + /* 7 bits are always with parity */ + case CS7: con = ASCCON_M_7ASYNCPAR; break; + /* the ASC only suports 7 and 8 bits */ + case CS5: + case CS6: + default: + if (cflag & PARENB) + con = ASCCON_M_8ASYNCPAR; + else + con = ASCCON_M_8ASYNC; + break; + } + if (cflag & CSTOPB) + con |= ASCCON_STP; + if (cflag & PARENB) { + if (!(cflag & PARODD)) + con &= ~ASCCON_ODD; + else + con |= ASCCON_ODD; + } + + port->read_status_mask = ASCCON_OE; + if (iflag & INPCK) + port->read_status_mask |= ASCCON_FE | ASCCON_PE; + + port->ignore_status_mask = 0; + if (iflag & IGNPAR) + port->ignore_status_mask |= ASCCON_FE | ASCCON_PE; + + if (iflag & IGNBRK) { + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (iflag & IGNPAR) + port->ignore_status_mask |= ASCCON_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_UER_RX; + + /* set error signals - framing, parity and overrun */ + con |= ASCCON_FEN; + con |= ASCCON_OEN; + con |= ASCCON_PEN; + /* enable the receiver */ + con |= ASCCON_REN; + + /* block the IRQs */ + local_irq_save(flags); + + /* set up CON */ + amazon_writel(con, AMAZON_ASC_CON); + + /* Set baud rate - take a divider of 2 into account */ + baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + quot = quot/2 - 1; + + /* the next 3 probably already happened when we set CON above */ + /* disable the baudrate generator */ + amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, 0); + /* make sure the fractional divider is off */ + amazon_writel_masked(AMAZON_ASC_CON, ASCCON_FDE, 0); + /* set up to use divisor of 2 */ + amazon_writel_masked(AMAZON_ASC_CON, ASCCON_BRS, 0); + /* now we can write the new baudrate into the register */ + amazon_writel(quot, AMAZON_ASC_BTR); + /* turn the baudrate generator back on */ + amazon_writel_masked(AMAZON_ASC_CON, ASCCON_R, ASCCON_R); + + local_irq_restore(flags); +} + +static const char *amazonasc_type(struct uart_port *port) +{ + return port->type == PORT_AMAZONASC ? "AMAZONASC" : NULL; +} + +/* + * Release the memory region(s) being used by 'port' + */ +static void amazonasc_release_port(struct uart_port *port) +{ + return; +} + +/* + * Request the memory region(s) being used by 'port' + */ +static int amazonasc_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void amazonasc_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_AMAZONASC; + amazonasc_request_port(port); + } +} + +/* + * verify the new serial_struct (for TIOCSSERIAL). + */ +static int amazonasc_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + int ret = 0; + if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMAZONASC) + ret = -EINVAL; + if (ser->irq < 0 || ser->irq >= NR_IRQS) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static struct uart_ops amazonasc_pops = { + .tx_empty = amazonasc_tx_empty, + .set_mctrl = amazonasc_set_mctrl, + .get_mctrl = amazonasc_get_mctrl, + .stop_tx = amazonasc_stop_tx, + .start_tx = amazonasc_start_tx, + .stop_rx = amazonasc_stop_rx, + .enable_ms = amazonasc_enable_ms, + .break_ctl = amazonasc_break_ctl, + .startup = amazonasc_startup, + .shutdown = amazonasc_shutdown, + .set_termios = amazonasc_set_termios, + .type = amazonasc_type, + .release_port = amazonasc_release_port, + .request_port = amazonasc_request_port, + .config_port = amazonasc_config_port, + .verify_port = amazonasc_verify_port, +}; + +static struct uart_port amazonasc_ports[UART_NR] = { + { + membase: (void *)AMAZON_ASC, + mapbase: AMAZON_ASC, + iotype: SERIAL_IO_MEM, + irq: AMAZONASC_RIR, /* RIR */ + uartclk: 0, /* filled in dynamically */ + fifosize: 16, + unused: { AMAZONASC_TIR, AMAZONASC_EIR}, /* xmit/error/xmit-buffer-empty IRQ */ + type: PORT_AMAZONASC, + ops: &amazonasc_pops, + flags: ASYNC_BOOT_AUTOCONF, + }, +}; + +static void amazonasc_console_write(struct console *co, const char *s, u_int count) +{ + int i, fifocnt; + unsigned long flags; + local_irq_save(flags); + for (i = 0; i < count;) + { + /* wait until the FIFO is not full */ + do + { + fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & ASCFSTAT_TXFFLMASK) + >> ASCFSTAT_TXFFLOFF; + } while (fifocnt == AMAZONASC_TXFIFO_FULL); + if (s[i] == '\0') + { + break; + } + if (s[i] == '\n') + { + amazon_writel('\r', AMAZON_ASC_TBUF); + do + { + fifocnt = (amazon_readl(AMAZON_ASC_FSTAT) & + ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF; + } while (fifocnt == AMAZONASC_TXFIFO_FULL); + } + amazon_writel(s[i], AMAZON_ASC_TBUF); + i++; + } + + local_irq_restore(flags); +} + +static void __init +amazonasc_console_get_options(struct uart_port *port, int *baud, int *parity, int *bits) +{ + u_int lcr_h; + + lcr_h = amazon_readl(AMAZON_ASC_CON); + /* do this only if the ASC is turned on */ + if (lcr_h & ASCCON_R) { + u_int quot, div, fdiv, frac; + + *parity = 'n'; + if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR || + (lcr_h & ASCCON_MODEMASK) == ASCCON_M_8ASYNCPAR) { + if (lcr_h & ASCCON_ODD) + *parity = 'o'; + else + *parity = 'e'; + } + + if ((lcr_h & ASCCON_MODEMASK) == ASCCON_M_7ASYNCPAR) + *bits = 7; + else + *bits = 8; + + quot = amazon_readl(AMAZON_ASC_BTR) + 1; + + /* this gets hairy if the fractional divider is used */ + if (lcr_h & ASCCON_FDE) + { + div = 1; + fdiv = amazon_readl(AMAZON_ASC_FDV); + if (fdiv == 0) + fdiv = 512; + frac = 512; + } + else + { + div = lcr_h & ASCCON_BRS ? 3 : 2; + fdiv = frac = 1; + } + /* + * This doesn't work exactly because we use integer + * math to calculate baud which results in rounding + * errors when we try to go from quot -> baud !! + * Try to make this work for both the fractional divider + * and the simple divider. Also try to avoid rounding + * errors using integer math. + */ + + *baud = frac * (port->uartclk / (div * 512 * 16 * quot)); + if (*baud > 1100 && *baud < 2400) + *baud = 1200; + if (*baud > 2300 && *baud < 4800) + *baud = 2400; + if (*baud > 4700 && *baud < 9600) + *baud = 4800; + if (*baud > 9500 && *baud < 19200) + *baud = 9600; + if (*baud > 19000 && *baud < 38400) + *baud = 19200; + if (*baud > 38400 && *baud < 57600) + *baud = 38400; + if (*baud > 57600 && *baud < 115200) + *baud = 57600; + if (*baud > 115200 && *baud < 230400) + *baud = 115200; + } +} + +static int __init amazonasc_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* this assumes: CON.BRS = CON.FDE = 0 */ + if (uartclk == 0) + uartclk = amazon_get_fpi_hz(); + co->index = 0; + port = &amazonasc_ports[0]; + amazonasc_ports[0].uartclk = uartclk; + amazonasc_ports[0].type = PORT_AMAZONASC; + + if (options){ + uart_parse_options(options, &baud, &parity, &bits, &flow); + } + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver amazonasc_reg; +static struct console amazonasc_console = { + name: "ttyS", + write: amazonasc_console_write, + device: uart_console_device, + setup: amazonasc_console_setup, + flags: CON_PRINTBUFFER, + index: -1, + data: &amazonasc_reg, +}; + +static int __init amazonasc_console_init(void) +{ + register_console(&amazonasc_console); + return 0; +} +console_initcall(amazonasc_console_init); + +static struct uart_driver amazonasc_reg = { + .owner = THIS_MODULE, + .driver_name = "serial", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = UART_NR, + .cons = &amazonasc_console, +}; + +static int __init amazonasc_init(void) +{ + unsigned char res; + uart_register_driver(&amazonasc_reg); + res = uart_add_one_port(&amazonasc_reg, &amazonasc_ports[0]); + return res; +} + +static void __exit amazonasc_exit(void) +{ + uart_unregister_driver(&amazonasc_reg); +} + +module_init(amazonasc_init); +module_exit(amazonasc_exit); + +MODULE_AUTHOR("Gary Jennejohn, Felix Fietkau, John Crispin"); +MODULE_DESCRIPTION("MIPS AMAZONASC serial port driver"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h b/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h new file mode 100644 index 0000000000..77cf4b131d --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/adm6996.h @@ -0,0 +1,232 @@ +/****************************************************************************** + Copyright (c) 2004, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. + ****************************************************************************** + Module : ifx_swdrv.h + Date : 2004-09-01 + Description : JoeLin + Remarks: + + *****************************************************************************/ + +#ifndef _ADM_6996_MODULE_H_ +#define _ADM_6996_MODULE_H_ + +#include + +#define ifx_printf(x) printk x + +/* command codes */ +#define ADM_SW_SMI_READ 0x02 +#define ADM_SW_SMI_WRITE 0x01 +#define ADM_SW_SMI_START 0x01 + +#define ADM_SW_EEPROM_WRITE 0x01 +#define ADM_SW_EEPROM_WRITE_ENABLE 0x03 +#define ADM_SW_EEPROM_WRITE_DISABLE 0x00 +#define EEPROM_TYPE 8 /* for 93C66 */ + +/* bit masks */ +#define ADM_SW_BIT_MASK_1 0x00000001 +#define ADM_SW_BIT_MASK_2 0x00000002 +#define ADM_SW_BIT_MASK_4 0x00000008 +#define ADM_SW_BIT_MASK_10 0x00000200 +#define ADM_SW_BIT_MASK_16 0x00008000 +#define ADM_SW_BIT_MASK_32 0x80000000 + +/* delay timers */ +#define ADM_SW_MDC_DOWN_DELAY 5 +#define ADM_SW_MDC_UP_DELAY 5 +#define ADM_SW_CS_DELAY 5 + +/* MDIO modes */ +#define ADM_SW_MDIO_OUTPUT 1 +#define ADM_SW_MDIO_INPUT 0 + +#define ADM_SW_MAX_PORT_NUM 5 +#define ADM_SW_MAX_VLAN_NUM 15 + +/* registers */ +#define ADM_SW_PORT0_CONF 0x1 +#define ADM_SW_PORT1_CONF 0x3 +#define ADM_SW_PORT2_CONF 0x5 +#define ADM_SW_PORT3_CONF 0x7 +#define ADM_SW_PORT4_CONF 0x8 +#define ADM_SW_PORT5_CONF 0x9 +#define ADM_SW_VLAN_MODE 0x11 +#define ADM_SW_MAC_LOCK 0x12 +#define ADM_SW_VLAN0_CONF 0x13 +#define ADM_SW_PORT0_PVID 0x28 +#define ADM_SW_PORT1_PVID 0x29 +#define ADM_SW_PORT2_PVID 0x2a +#define ADM_SW_PORT34_PVID 0x2b +#define ADM_SW_PORT5_PVID 0x2c +#define ADM_SW_PHY_RESET 0x2f +#define ADM_SW_MISC_CONF 0x30 +#define ADM_SW_BNDWDH_CTL0 0x31 +#define ADM_SW_BNDWDH_CTL1 0x32 +#define ADM_SW_BNDWDH_CTL_ENA 0x33 + +/* port modes */ +#define ADM_SW_PORT_FLOWCTL 0x1 /* 802.3x flow control */ +#define ADM_SW_PORT_AN 0x2 /* auto negotiation */ +#define ADM_SW_PORT_100M 0x4 /* 100M */ +#define ADM_SW_PORT_FULL 0x8 /* full duplex */ +#define ADM_SW_PORT_TAG 0x10 /* output tag on */ +#define ADM_SW_PORT_DISABLE 0x20 /* disable port */ +#define ADM_SW_PORT_TOS 0x40 /* TOS first */ +#define ADM_SW_PORT_PPRI 0x80 /* port based priority first */ +#define ADM_SW_PORT_MDIX 0x8000 /* auto MDIX on */ +#define ADM_SW_PORT_PVID_SHIFT 10 +#define ADM_SW_PORT_PVID_BITS 4 + +/* VLAN */ +#define ADM_SW_VLAN_PORT0 0x1 +#define ADM_SW_VLAN_PORT1 0x2 +#define ADM_SW_VLAN_PORT2 0x10 +#define ADM_SW_VLAN_PORT3 0x40 +#define ADM_SW_VLAN_PORT4 0x80 +#define ADM_SW_VLAN_PORT5 0x100 + + +/* GPIO 012 enabled, output mode */ +#define GPIO_ENABLEBITS 0x000700f8 + +/* + define AMAZON GPIO port to ADM6996 EEPROM interface + MDIO -> EEDI GPIO 16, AMAZON GPIO P1.0, bi-direction + MDC -> EESK GPIO 17, AMAZON GPIO P1.1, output only + MDCS -> EECS GPIO 18, AMAZON GPIO P1.2, output only + EEDO GPIO 15, AMAZON GPIO P0.15, do not need this one! */ + +#define GPIO_MDIO 1 //P1.0 +#define GPIO_MDC 2 //P1.1 +#define GPIO_MDCS 4 //P1.2 + +//joelin #define GPIO_MDIO 0 +//joelin #define GPIO_MDC 5 /* PORT 0 GPIO5 */ +//joelin #define GPIO_MDCS 6 /* PORT 0 GPIO6 */ + + +#define MDIO_INPUT 0x00000001 +#define MDIO_OUTPUT_EN 0x00010000 + + +/* type definitions */ +typedef unsigned char U8; +typedef unsigned short U16; +typedef unsigned int U32; + +typedef struct _REGRW_ +{ + unsigned int addr; + unsigned int value; + unsigned int mode; +}REGRW, *PREGRW; + +//joelin adm6996i +typedef struct _MACENTRY_ +{ + unsigned char mac_addr[6]; + unsigned long fid:4; + unsigned long portmap:6; + union { + unsigned long age_timer:9; + unsigned long info_ctrl:9; + } ctrl; + unsigned long occupy:1; + unsigned long info_type:1; + unsigned long bad:1; + unsigned long result:3;//000:command ok ,001:all entry used,010:Entry Not found ,011:try next entry ,101:command error + + }MACENTRY, *PMACENTRY; +typedef struct _PROTOCOLFILTER_ +{ + int protocol_filter_num;//[0~7] + int ip_p; //Value Compared with Protocol in IP Heade[7:0] + char action:2;//Action for protocol Filter . +//00 = Protocol Portmap is Default Output Ports. +//01 = Protocol Portmap is 6'b0. +//10 = Protocol Portmap is the CPU port if the incoming port +//is not the CPU port. But if the incoming port is the CPU port, then Type Portmap contains Default Output Ports, excluding the CPU port. + }PROTOCOLFILTER, *PPROTOCOLFILTER; + +//joelin adm6996i + +/* Santosh: for IGMP proxy/snooping */ + +//050614:fchang int adm_process_mac_table_request (unsigned int cmd, struct _MACENTRY_ *mac); +//050614:fchang int adm_process_protocol_filter_request (unsigned int cmd, struct _PROTOCOLFILTER_ *filter); + + +/* IOCTL keys */ +#define KEY_IOCTL_ADM_REGRW 0x01 +#define KEY_IOCTL_ADM_SW_REGRW 0x02 +#define KEY_IOCTL_ADM_SW_PORTSTS 0x03 +#define KEY_IOCTL_ADM_SW_INIT 0x04 +//for adm6996i-start +#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD 0x05 +#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL 0x06 +#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT 0x07 +#define KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE 0x08 +#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD 0x09 +#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL 0x0a +#define KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET 0x0b + +//adm6996i #define KEY_IOCTL_MAX_KEY 0x05 +#define KEY_IOCTL_MAX_KEY 0x0c +//for adm6996i-end +/* IOCTL MAGIC */ +#define ADM_MAGIC ('a'|'d'|'m'|'t'|'e'|'k') + +/* IOCTL parameters */ +#define ADM_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_REGRW, REGRW) +#define ADM_SW_IOCTL_REGRW _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_REGRW, REGRW) +#define ADM_SW_IOCTL_PORTSTS _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_PORTSTS, NULL) +#define ADM_SW_IOCTL_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_INIT, NULL) + + +//6996i-stat +#define ADM_SW_IOCTL_MACENTRY_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_ADD,MACENTRY) +#define ADM_SW_IOCTL_MACENTRY_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_DEL,MACENTRY) +#define ADM_SW_IOCTL_MACENTRY_GET_INIT _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_INIT,MACENTRY) +#define ADM_SW_IOCTL_MACENTRY_GET_MORE _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_MACENTRY_GET_MORE,MACENTRY) +#define ADM_SW_IOCTL_FILTER_ADD _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_ADD,PROTOCOLFILTER) +#define ADM_SW_IOCTL_FILTER_DEL _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_DEL,PROTOCOLFILTER) +#define ADM_SW_IOCTL_FILTER_GET _IOWR(ADM_MAGIC, KEY_IOCTL_ADM_SW_IOCTL_FILTER_GET,PROTOCOLFILTER) + +//6996i-end + + +#define REG_READ 0x0 +#define REG_WRITE 0x1 + +/* undefine symbol */ +#define AMAZON_SW_REG(reg) *((volatile U32*)(reg)) +//#define GPIO0_INPUT_MASK 0 +//#define GPIO_conf0_REG 0x12345678 +//#define GPIO_SET_HI +//#define GPIO_SET_LOW + +#endif +/* _ADM_6996_MODULE_H_ */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon.h new file mode 100644 index 0000000000..d28bb418f1 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon.h @@ -0,0 +1,1440 @@ +#ifndef AMAZON_H +#define AMAZON_H +/****************************************************************************** + Copyright (c) 2002, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. +******************************************************************************/ + +#define amazon_readl(a) readl(((u32*)(a))) +#define amazon_writel(a,b) writel(a, ((u32*)(b))) +#define amazon_writel_masked(a,b,c) writel((readl(((u32*)(a))) & ~b) | (c & b), ((u32*)(a))) + +/* check ADSL link status */ +#define AMAZON_CHECK_LINK + +/***********************************************************************/ +/* Module : WDT register address and bits */ +/***********************************************************************/ + +#define AMAZON_WDT (KSEG1+0x10100900) +/***********************************************************************/ + +/***Reset Request Register***/ +#define AMAZON_RST_REQ ((volatile u32*)(AMAZON_WDT+ 0x0010)) +#define AMAZON_RST_REQ_PLL (1 << 31) +#define AMAZON_RST_REQ_PCI_CORE (1 << 13) +#define AMAZON_RST_REQ_TPE (1 << 12) +#define AMAZON_RST_REQ_AFE (1 << 11) +#define AMAZON_RST_REQ_DMA (1 << 9) +#define AMAZON_RST_REQ_SWITCH (1 << 8) +#define AMAZON_RST_REQ_DFE (1 << 7) +#define AMAZON_RST_REQ_PHY (1 << 5) +#define AMAZON_RST_REQ_PCI (1 << 4) +#define AMAZON_RST_REQ_FPI (1 << 2) +#define AMAZON_RST_REQ_CPU (1 << 1) +#define AMAZON_RST_REQ_HRST (1 << 0) +#define AMAZON_RST_ALL (AMAZON_RST_REQ_PLL \ + |AMAZON_RST_REQ_PCI_CORE \ + |AMAZON_RST_REQ_TPE \ + |AMAZON_RST_REQ_AFE \ + |AMAZON_RST_REQ_DMA \ + |AMAZON_RST_REQ_SWITCH \ + |AMAZON_RST_REQ_DFE \ + |AMAZON_RST_REQ_PHY \ + |AMAZON_RST_REQ_PCI \ + |AMAZON_RST_REQ_FPI \ + |AMAZON_RST_REQ_CPU \ + |AMAZON_RST_REQ_HRST) + +/***Reset Status Register Power On***/ +#define AMAZON_RST_SR ((volatile u32*)(AMAZON_WDT+ 0x0014)) + +/***Watchdog Timer Control Register 0***/ +#define AMAZON_WDT_CON0 ((volatile u32*)(AMAZON_WDT+ 0x0020)) + +/***Watchdog Timer Control Register 1***/ +#define AMAZON_WDT_CON1 ((volatile u32*)(AMAZON_WDT+ 0x0024)) +#define AMAZON_WDT_CON1_WDTDR (1 << 3) +#define AMAZON_WDT_CON1_WDTIR (1 << 2) + +/***Watchdog Timer Status Register***/ +#define AMAZON_WDT_SR ((volatile u32*)(AMAZON_WDT+ 0x0028)) +#define AMAZON_WDT_SR_WDTTIM(value) (((( 1 << 16) - 1) & (value)) << 16) +#define AMAZON_WDT_SR_WDTPR (1 << 5) +#define AMAZON_WDT_SR_WDTTO (1 << 4) +#define AMAZON_WDT_SR_WDTDS (1 << 3) +#define AMAZON_WDT_SR_WDTIS (1 << 2) +#define AMAZON_WDT_SR_WDTOE (1 << 1) +#define AMAZON_WDT_SR_WDTAE (1 << 0) + +/***NMI Status Register***/ +#define AMAZON_WDT_NMISR ((volatile u32*)(AMAZON_WDT+ 0x002C)) +#define AMAZON_WDT_NMISR_NMIWDT (1 << 2) +#define AMAZON_WDT_NMISR_NMIPLL (1 << 1) +#define AMAZON_WDT_NMISR_NMIEXT (1 << 0) + +#define AMAZON_WDT_RST_MON ((volatile u32*)(AMAZON_WDT+ 0x0030)) + +/***********************************************************************/ +/* Module : MCD register address and bits */ +/***********************************************************************/ +#define AMAZON_MCD (KSEG1+0x1F106000) + +/***Manufacturer Identification Register***/ +#define AMAZON_MCD_MANID ((volatile u32*)(AMAZON_MCD+ 0x0024)) +#define AMAZON_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5) + +/***Chip Identification Register***/ +#define AMAZON_MCD_CHIPID ((volatile u32*)(AMAZON_MCD+ 0x0028)) +#define AMAZON_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1)) +#define AMAZON_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28) +#define AMAZON_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1)) +#define AMAZON_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12) +#define AMAZON_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1)) +#define AMAZON_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1) + +#define AMAZON_CHIPID_STANDARD 0x00EB +#define AMAZON_CHIPID_YANGTSE 0x00ED + +/***Redesign Tracing Identification Register***/ +#define AMAZON_MCD_RTID ((volatile u32*)(AMAZON_MCD+ 0x002C)) +#define AMAZON_MCD_RTID_LC (1 << 15) +#define AMAZON_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0) + + +/***********************************************************************/ +/* Module : CGU register address and bits */ +/***********************************************************************/ + +#define AMAZON_CGU (KSEG1+0x1F103000) +/***********************************************************************/ + +/***CGU Clock Divider Select Register***/ +#define AMAZON_CGU_DIV (AMAZON_CGU + 0x0000) +/***CGU PLL0 Status Register***/ +#define AMAZON_CGU_PLL0SR (AMAZON_CGU + 0x0004) +/***CGU PLL1 Status Register***/ +#define AMAZON_CGU_PLL1SR (AMAZON_CGU + 0x0008) +/***CGU Interface Clock Control Register***/ +#define AMAZON_CGU_IFCCR (AMAZON_CGU + 0x000c) +/***CGU Oscillator Control Register***/ +#define AMAZON_CGU_OSCCR (AMAZON_CGU + 0x0010) +/***CGU Memory Clock Delay Register***/ +#define AMAZON_CGU_MCDEL (AMAZON_CGU + 0x0014) +/***CGU CPU Clock Reduction Register***/ +#define AMAZON_CGU_CPUCRD (AMAZON_CGU + 0x0018) +/***CGU Test Register**/ +#define AMAZON_CGU_TST (AMAZON_CGU + 0x003c) + +/***********************************************************************/ +/* Module : PMU register address and bits */ +/***********************************************************************/ + +#define AMAZON_PMU AMAZON_CGU +/***********************************************************************/ + + +/***PMU Power Down Control Register***/ +#define AMAZON_PMU_PWDCR ((volatile u32*)(AMAZON_PMU+ 0x001c)) +#define AMAZON_PMU_PWDCR_TPE (1 << 13) +#define AMAZON_PMU_PWDCR_PLL (1 << 12) +#define AMAZON_PMU_PWDCR_XTAL (1 << 11) +#define AMAZON_PMU_PWDCR_EBU (1 << 10) +#define AMAZON_PMU_PWDCR_DFE (1 << 9) +#define AMAZON_PMU_PWDCR_SPI (1 << 8) +#define AMAZON_PMU_PWDCR_UART (1 << 7) +#define AMAZON_PMU_PWDCR_GPT (1 << 6) +#define AMAZON_PMU_PWDCR_DMA (1 << 5) +#define AMAZON_PMU_PWDCR_PCI (1 << 4) +#define AMAZON_PMU_PWDCR_SW (1 << 3) +#define AMAZON_PMU_PWDCR_IOR (1 << 2) +#define AMAZON_PMU_PWDCR_FPI (1 << 1) +#define AMAZON_PMU_PWDCR_EPHY (1 << 0) + +/***PMU Status Register***/ +#define AMAZON_PMU_SR ((volatile u32*)(AMAZON_PMU+ 0x0020)) +#define AMAZON_PMU_SR_TPE (1 << 13) +#define AMAZON_PMU_SR_PLL (1 << 12) +#define AMAZON_PMU_SR_XTAL (1 << 11) +#define AMAZON_PMU_SR_EBU (1 << 10) +#define AMAZON_PMU_SR_DFE (1 << 9) +#define AMAZON_PMU_SR_SPI (1 << 8) +#define AMAZON_PMU_SR_UART (1 << 7) +#define AMAZON_PMU_SR_GPT (1 << 6) +#define AMAZON_PMU_SR_DMA (1 << 5) +#define AMAZON_PMU_SR_PCI (1 << 4) +#define AMAZON_PMU_SR_SW (1 << 3) +#define AMAZON_PMU_SR_IOR (1 << 2) +#define AMAZON_PMU_SR_FPI (1 << 1) +#define AMAZON_PMU_SR_EPHY (1 << 0) + +/***********************************************************************/ +/* Module : BCU register address and bits */ +/***********************************************************************/ + +#define AMAZON_BCU (KSEG1+0x10100000) +/***********************************************************************/ + + +/***BCU Control Register (0010H)***/ +#define AMAZON_BCU_CON ((volatile u32*)(AMAZON_BCU+ 0x0010)) +#define AMAZON_BCU_CON_SPC(value) (((( 1 << 8) - 1) & (value)) << 24) +#define AMAZON_BCU_CON_SPE (1 << 19) +#define AMAZON_BCU_CON_PSE (1 << 18) +#define AMAZON_BCU_CON_DBG (1 << 16) +#define AMAZON_BCU_CON_TOUT(value) (((( 1 << 16) - 1) & (value)) << 0) + +/***BCU Error Control Capture Register (0020H)***/ +#define AMAZON_BCU_ECON ((volatile u32*)(AMAZON_BCU+ 0x0020)) +#define AMAZON_BCU_ECON_TAG(value) (((( 1 << 4) - 1) & (value)) << 24) +#define AMAZON_BCU_ECON_RDN (1 << 23) +#define AMAZON_BCU_ECON_WRN (1 << 22) +#define AMAZON_BCU_ECON_SVM (1 << 21) +#define AMAZON_BCU_ECON_ACK(value) (((( 1 << 2) - 1) & (value)) << 19) +#define AMAZON_BCU_ECON_ABT (1 << 18) +#define AMAZON_BCU_ECON_RDY (1 << 17) +#define AMAZON_BCU_ECON_TOUT (1 << 16) +#define AMAZON_BCU_ECON_ERRCNT(value) (((( 1 << 16) - 1) & (value)) << 0) +#define AMAZON_BCU_ECON_OPC(value) (((( 1 << 4) - 1) & (value)) << 28) + +/***BCU Error Address Capture Register (0024 H)***/ +#define AMAZON_BCU_EADD ((volatile u32*)(AMAZON_BCU+ 0x0024)) +#define AMAZON_BCU_EADD_FPIADR + +/***BCU Error Data Capture Register (0028H)***/ +#define AMAZON_BCU_EDAT ((volatile u32*)(AMAZON_BCU+ 0x0028)) +#define AMAZON_BCU_EDAT_FPIDAT + +/***********************************************************************/ +/* Module : Switch register address and bits */ +/***********************************************************************/ + +#define AMAZON_SWITCH (KSEG1+0x10106000) +/***********************************************************************/ +#define AMAZON_SW_UN_DEST AMAZON_SWITCH+0x00 /*Unknown destination register*/ +#define AMAZON_SW_VLAN_CTRL AMAZON_SWITCH+0x04 /*VLAN control register*/ +#define AMAZON_SW_PS_CTL AMAZON_SWITCH+0x08 /*port status control register*/ +#define AMAZON_SW_COS_CTL AMAZON_SWITCH+0x0c /*Cos control register*/ +#define AMAZON_SW_VLAN_COS AMAZON_SWITCH+0x10 /*VLAN priority cos mapping register*/ +#define AMAZON_SW_DSCP_COS3 AMAZON_SWITCH+0x14 /*DSCP cos mapping register3*/ +#define AMAZON_SW_DSCP_COS2 AMAZON_SWITCH+0x18 /*DSCP cos mapping register2*/ +#define AMAZON_SW_DSCP_COS1 AMAZON_SWITCH+0x1c /*DSCP cos mapping register1*/ +#define AMAZON_SW_DSCP_COS0 AMAZON_SWITCH+0x20 /*DSCP cos mapping register*/ +#define AMAZON_SW_ARL_CTL AMAZON_SWITCH+0x24 /*ARL control register*/ +#define AMAZON_SW_PKT_LEN AMAZON_SWITCH+0x28 /*packet length register*/ +#define AMAZON_SW_CPU_ACTL AMAZON_SWITCH+0x2c /*CPU control register1*/ +#define AMAZON_SW_DATA1 AMAZON_SWITCH+0x30 /*CPU access control register1*/ +#define AMAZON_SW_DATA2 AMAZON_SWITCH+0x34 /*CPU access control register2*/ +#define AMAZON_SW_P2_PCTL AMAZON_SWITCH+0x38 /*Port2 control register*/ +#define AMAZON_SW_P0_TX_CTL AMAZON_SWITCH+0x3c /*port0 TX control register*/ +#define AMAZON_SW_P1_TX_CTL AMAZON_SWITCH+0x40 /*port 1 TX control register*/ +#define AMAZON_SW_P0_WM AMAZON_SWITCH+0x44 /*port 0 watermark control register*/ +#define AMAZON_SW_P1_WM AMAZON_SWITCH+0x48 /*port 1 watermark control register*/ +#define AMAZON_SW_P2_WM AMAZON_SWITCH+0x4c /*port 2 watermark control register*/ +#define AMAZON_SW_GBL_WM AMAZON_SWITCH+0x50 /*Global watermark register*/ +#define AMAZON_SW_PM_CTL AMAZON_SWITCH+0x54 /*PM control register*/ +#define AMAZON_SW_P2_CTL AMAZON_SWITCH+0x58 /*PMAC control register*/ +#define AMAZON_SW_P2_TX_IPG AMAZON_SWITCH+0x5c /*port2 TX IPG control register*/ +#define AMAZON_SW_P2_RX_IPG AMAZON_SWITCH+0x60 /*prot2 RX IPG control register*/ +#define AMAZON_SW_MDIO_ACC AMAZON_SWITCH+0x64 /*MDIO access register*/ +#define AMAZON_SW_EPHY AMAZON_SWITCH+0x68 /*Ethernet PHY register*/ +#define AMAZON_SW_MDIO_CFG AMAZON_SWITCH+0x6c /*MDIO configuration register*/ +#define AMAZON_SW_P0_RCV_DROP_CNT AMAZON_SWITCH+0x70 /*port0 receive drop counter */ +#define AMAZON_SW_P0_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x74 /*port0 receive frame error conter*/ +#define AMAZON_SW_P0_TX_COLL_CNT AMAZON_SWITCH+0x78 /*port0 transmit collision counter*/ +#define AMAZON_SW_P0_TX_DROP_CNT AMAZON_SWITCH+0x7c /*port1 transmit drop counter*/ +#define AMAZON_SW_P1_RCV_DROP_CNT AMAZON_SWITCH+0x80 /*port1 receive drop counter*/ +#define AMAZON_SW_P1_RCV_FRAME_ERR_CNT AMAZON_SWITCH+0x84 /*port1 receive error counter*/ +#define AMAZON_SW_P1_TX_COLL_CNT AMAZON_SWITCH+0x88 /*port1 transmit collision counter*/ +#define AMAZON_SW_P1_TX_DROP_CNT AMAZON_SWITCH+0x8c /*port1 transmit drop counter*/ + + + +/***********************************************************************/ +/* Module : SSC register address and bits */ +/***********************************************************************/ +#define AMAZON_SSC_BASE_ADD_0 (KSEG1+0x10100800) + +/*165001:henryhsu:20050603:Source add by Bing Tao*/ + +/*configuration/Status Registers in Bus Clock Domain*/ +#define AMAZON_SSC_CLC ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0000)) +#define AMAZON_SSC_ID ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0008)) +#define AMAZON_SSC_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0010)) +#define AMAZON_SSC_STATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0014)) +#define AMAZON_SSC_WHBSTATE ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0018)) +#define AMAZON_SSC_TB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0020)) +#define AMAZON_SSC_RB ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0024)) +#define AMAZON_SSC_FSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0038)) + +/*Configuration/Status Registers in Kernel Clock Domain*/ +#define AMAZON_SSC_PISEL ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0004)) +#define AMAZON_SSC_RXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0030)) +#define AMAZON_SSC_TXFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0034)) +#define AMAZON_SSC_BR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0040)) +#define AMAZON_SSC_BRSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0044)) +#define AMAZON_SSC_SFCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0060)) +#define AMAZON_SSC_SFSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0064)) +#define AMAZON_SSC_GPOCON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0070)) +#define AMAZON_SSC_GPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0074)) +#define AMAZON_SSC_WHBGPOSTAT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0078)) +#define AMAZON_SSC_RXREQ ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0080)) +#define AMAZON_SSC_RXCNT ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x0084)) + +/*DMA Registers in Bus Clock Domain*/ +#define AMAZON_SSC_DMA_CON ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00ec)) + +/*interrupt Node Registers in Bus Clock Domain*/ +#define AMAZON_SSC_IRNEN ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F4)) +#define AMAZON_SSC_IRNICR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00FC)) +#define AMAZON_SSC_IRNCR ((volatile u32*)(AMAZON_SSC_BASE_ADD_0+0x00F8)) + +/*165001*/ + +/***********************************************************************/ + + + +/***********************************************************************/ +/* Module : EBU register address and bits */ +/***********************************************************************/ + +#define AMAZON_EBU (KSEG1+0x10105300) +/***********************************************************************/ + + +/***EBU Clock Control Register***/ +#define AMAZON_EBU_CLC ((volatile u32*)(AMAZON_EBU+ 0x0000)) +#define AMAZON_EBU_CLC_DISS (1 << 1) +#define AMAZON_EBU_CLC_DISR (1 << 0) + +/***EBU Global Control Register***/ +#define AMAZON_EBU_CON ((volatile u32*)(AMAZON_EBU+ 0x0010)) +#define AMAZON_EBU_CON_DTACS(value) (((( 1 << 3) - 1) & (value)) << 20) +#define AMAZON_EBU_CON_DTARW(value) (((( 1 << 3) - 1) & (value)) << 16) +#define AMAZON_EBU_CON_TOUTC(value) (((( 1 << 8) - 1) & (value)) << 8) +#define AMAZON_EBU_CON_ARBMODE(value) (((( 1 << 2) - 1) & (value)) << 6) +#define AMAZON_EBU_CON_ARBSYNC (1 << 5) +#define AMAZON_EBU_CON_1 (1 << 3) + +/***EBU Address Select Register 0***/ +#define AMAZON_EBU_ADDSEL0 ((volatile u32*)(AMAZON_EBU+ 0x0020)) +#define AMAZON_EBU_ADDSEL0_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) +#define AMAZON_EBU_ADDSEL0_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) +#define AMAZON_EBU_ADDSEL0_MIRRORE (1 << 1) +#define AMAZON_EBU_ADDSEL0_REGEN (1 << 0) + +/***EBU Address Select Register 1***/ +#define AMAZON_EBU_ADDSEL1 ((volatile u32*)(AMAZON_EBU+ 0x0024)) +#define AMAZON_EBU_ADDSEL1_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) +#define AMAZON_EBU_ADDSEL1_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) +#define AMAZON_EBU_ADDSEL1_MIRRORE (1 << 1) +#define AMAZON_EBU_ADDSEL1_REGEN (1 << 0) + +/***EBU Address Select Register 2***/ +#define AMAZON_EBU_ADDSEL2 ((volatile u32*)(AMAZON_EBU+ 0x0028)) +#define AMAZON_EBU_ADDSEL2_BASE(value) (((( 1 << 20) - 1) & (value)) << 12) +#define AMAZON_EBU_ADDSEL2_MASK(value) (((( 1 << 4) - 1) & (value)) << 4) +#define AMAZON_EBU_ADDSEL2_MIRRORE (1 << 1) +#define AMAZON_EBU_ADDSEL2_REGEN (1 << 0) + +/***EBU Bus Configuration Register 0***/ +#define AMAZON_EBU_BUSCON0 ((volatile u32*)(AMAZON_EBU+ 0x0060)) +#define AMAZON_EBU_BUSCON0_WRDIS (1 << 31) +#define AMAZON_EBU_BUSCON0_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) +#define AMAZON_EBU_BUSCON0_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) +#define AMAZON_EBU_BUSCON0_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) +#define AMAZON_EBU_BUSCON0_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) +#define AMAZON_EBU_BUSCON0_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) +#define AMAZON_EBU_BUSCON0_WAITINV (1 << 19) +#define AMAZON_EBU_BUSCON0_SETUP (1 << 18) +#define AMAZON_EBU_BUSCON0_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) +#define AMAZON_EBU_BUSCON0_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) +#define AMAZON_EBU_BUSCON0_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) +#define AMAZON_EBU_BUSCON0_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) +#define AMAZON_EBU_BUSCON0_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) +#define AMAZON_EBU_BUSCON0_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) + +/***EBU Bus Configuration Register 1***/ +#define AMAZON_EBU_BUSCON1 ((volatile u32*)(AMAZON_EBU+ 0x0064)) +#define AMAZON_EBU_BUSCON1_WRDIS (1 << 31) +#define AMAZON_EBU_BUSCON1_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) +#define AMAZON_EBU_BUSCON1_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) +#define AMAZON_EBU_BUSCON1_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) +#define AMAZON_EBU_BUSCON1_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) +#define AMAZON_EBU_BUSCON1_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) +#define AMAZON_EBU_BUSCON1_WAITINV (1 << 19) +#define AMAZON_EBU_BUSCON1_SETUP (1 << 18) +#define AMAZON_EBU_BUSCON1_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) +#define AMAZON_EBU_BUSCON1_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) +#define AMAZON_EBU_BUSCON1_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) +#define AMAZON_EBU_BUSCON1_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) +#define AMAZON_EBU_BUSCON1_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) +#define AMAZON_EBU_BUSCON1_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) + +/***EBU Bus Configuration Register 2***/ +#define AMAZON_EBU_BUSCON2 ((volatile u32*)(AMAZON_EBU+ 0x0068)) +#define AMAZON_EBU_BUSCON2_WRDIS (1 << 31) +#define AMAZON_EBU_BUSCON2_ALEC(value) (((( 1 << 2) - 1) & (value)) << 29) +#define AMAZON_EBU_BUSCON2_BCGEN(value) (((( 1 << 2) - 1) & (value)) << 27) +#define AMAZON_EBU_BUSCON2_AGEN(value) (((( 1 << 2) - 1) & (value)) << 24) +#define AMAZON_EBU_BUSCON2_CMULTR(value) (((( 1 << 2) - 1) & (value)) << 22) +#define AMAZON_EBU_BUSCON2_WAIT(value) (((( 1 << 2) - 1) & (value)) << 20) +#define AMAZON_EBU_BUSCON2_WAITINV (1 << 19) +#define AMAZON_EBU_BUSCON2_SETUP (1 << 18) +#define AMAZON_EBU_BUSCON2_PORTW(value) (((( 1 << 2) - 1) & (value)) << 16) +#define AMAZON_EBU_BUSCON2_WAITRDC(value) (((( 1 << 7) - 1) & (value)) << 9) +#define AMAZON_EBU_BUSCON2_WAITWRC(value) (((( 1 << 3) - 1) & (value)) << 6) +#define AMAZON_EBU_BUSCON2_HOLDC(value) (((( 1 << 2) - 1) & (value)) << 4) +#define AMAZON_EBU_BUSCON2_RECOVC(value) (((( 1 << 2) - 1) & (value)) << 2) +#define AMAZON_EBU_BUSCON2_CMULT(value) (((( 1 << 2) - 1) & (value)) << 0) + +/***********************************************************************/ +/* Module : SDRAM register address and bits */ +/***********************************************************************/ + +#define AMAZON_SDRAM (KSEG1+0x1F800000) +/***********************************************************************/ + + +/***MC Access Error Cause Register***/ +#define AMAZON_SDRAM_MC_ERRCAUSE ((volatile u32*)(AMAZON_SDRAM+ 0x0010)) +#define AMAZON_SDRAM_MC_ERRCAUSE_ERR (1 << 31) +#define AMAZON_SDRAM_MC_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16) +#define AMAZON_SDRAM_MC_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0) +#define AMAZON_SDRAM_MC_ERRCAUSE_Res(value) (((( 1 << NaN) - 1) & (value)) << NaN) + +/***MC Access Error Address Register***/ +#define AMAZON_SDRAM_MC_ERRADDR ((volatile u32*)(AMAZON_SDRAM+ 0x0020)) +#define AMAZON_SDRAM_MC_ERRADDR_ADDR + +/***MC I/O General Purpose Register***/ +#define AMAZON_SDRAM_MC_IOGP ((volatile u32*)(AMAZON_SDRAM+ 0x0100)) +#define AMAZON_SDRAM_MC_IOGP_GPR6(value) (((( 1 << 4) - 1) & (value)) << 28) +#define AMAZON_SDRAM_MC_IOGP_GPR5(value) (((( 1 << 4) - 1) & (value)) << 24) +#define AMAZON_SDRAM_MC_IOGP_GPR4(value) (((( 1 << 4) - 1) & (value)) << 20) +#define AMAZON_SDRAM_MC_IOGP_GPR3(value) (((( 1 << 4) - 1) & (value)) << 16) +#define AMAZON_SDRAM_MC_IOGP_GPR2(value) (((( 1 << 4) - 1) & (value)) << 12) +#define AMAZON_SDRAM_MC_IOGP_CPS (1 << 11) +#define AMAZON_SDRAM_MC_IOGP_CLKDELAY(value) (((( 1 << 3) - 1) & (value)) << 8) +#define AMAZON_SDRAM_MC_IOGP_CLKRAT(value) (((( 1 << 4) - 1) & (value)) << 4) +#define AMAZON_SDRAM_MC_IOGP_RDDEL(value) (((( 1 << 4) - 1) & (value)) << 0) + +/***MC Self Refresh Register***/ +#define AMAZON_SDRAM_MC_SELFRFSH ((volatile u32*)(AMAZON_SDRAM+ 0x01A0)) +#define AMAZON_SDRAM_MC_SELFRFSH_PWDS (1 << 1) +#define AMAZON_SDRAM_MC_SELFRFSH_PWD (1 << 0) +#define AMAZON_SDRAM_MC_SELFRFSH_Res(value) (((( 1 << 30) - 1) & (value)) << 2) + +/***MC Enable Register***/ +#define AMAZON_SDRAM_MC_CTRLENA ((volatile u32*)(AMAZON_SDRAM+ 0x0110)) +#define AMAZON_SDRAM_MC_CTRLENA_ENA (1 << 0) +#define AMAZON_SDRAM_MC_CTRLENA_Res(value) (((( 1 << 31) - 1) & (value)) << 1) + +/***MC Mode Register Setup Code***/ +#define AMAZON_SDRAM_MC_MRSCODE ((volatile u32*)(AMAZON_SDRAM+ 0x0120)) +#define AMAZON_SDRAM_MC_MRSCODE_UMC(value) (((( 1 << 5) - 1) & (value)) << 7) +#define AMAZON_SDRAM_MC_MRSCODE_CL(value) (((( 1 << 3) - 1) & (value)) << 4) +#define AMAZON_SDRAM_MC_MRSCODE_WT (1 << 3) +#define AMAZON_SDRAM_MC_MRSCODE_BL(value) (((( 1 << 3) - 1) & (value)) << 0) + +/***MC Configuration Data-word Width Register***/ +#define AMAZON_SDRAM_MC_CFGDW ((volatile u32*)(AMAZON_SDRAM+ 0x0130)) +#define AMAZON_SDRAM_MC_CFGDW_DW(value) (((( 1 << 4) - 1) & (value)) << 0) +#define AMAZON_SDRAM_MC_CFGDW_Res(value) (((( 1 << 28) - 1) & (value)) << 4) + +/***MC Configuration Physical Bank 0 Register***/ +#define AMAZON_SDRAM_MC_CFGPB0 ((volatile u32*)(AMAZON_SDRAM+ 0x140)) +#define AMAZON_SDRAM_MC_CFGPB0_MCSEN0(value) (((( 1 << 4) - 1) & (value)) << 12) +#define AMAZON_SDRAM_MC_CFGPB0_BANKN0(value) (((( 1 << 4) - 1) & (value)) << 8) +#define AMAZON_SDRAM_MC_CFGPB0_ROWW0(value) (((( 1 << 4) - 1) & (value)) << 4) +#define AMAZON_SDRAM_MC_CFGPB0_COLW0(value) (((( 1 << 4) - 1) & (value)) << 0) +#define AMAZON_SDRAM_MC_CFGPB0_Res(value) (((( 1 << 16) - 1) & (value)) << 16) + +/***MC Latency Register***/ +#define AMAZON_SDRAM_MC_LATENCY ((volatile u32*)(AMAZON_SDRAM+ 0x0180)) +#define AMAZON_SDRAM_MC_LATENCY_TRP(value) (((( 1 << 4) - 1) & (value)) << 16) +#define AMAZON_SDRAM_MC_LATENCY_TRAS(value) (((( 1 << 4) - 1) & (value)) << 12) +#define AMAZON_SDRAM_MC_LATENCY_TRCD(value) (((( 1 << 4) - 1) & (value)) << 8) +#define AMAZON_SDRAM_MC_LATENCY_TDPL(value) (((( 1 << 4) - 1) & (value)) << 4) +#define AMAZON_SDRAM_MC_LATENCY_TDAL(value) (((( 1 << 4) - 1) & (value)) << 0) +#define AMAZON_SDRAM_MC_LATENCY_Res(value) (((( 1 << 12) - 1) & (value)) << 20) + +/***MC Refresh Cycle Time Register***/ +#define AMAZON_SDRAM_MC_TREFRESH ((volatile u32*)(AMAZON_SDRAM+ 0x0190)) +#define AMAZON_SDRAM_MC_TREFRESH_TREF(value) (((( 1 << 13) - 1) & (value)) << 0) +#define AMAZON_SDRAM_MC_TREFRESH_Res(value) (((( 1 << 19) - 1) & (value)) << 13) + +/***********************************************************************/ +/* Module : GPTU register address and bits */ +/***********************************************************************/ + +#define AMAZON_GPTU (KSEG1+0x10100A00) +/***********************************************************************/ + + +/***GPT Clock Control Register***/ +#define AMAZON_GPTU_CLC ((volatile u32*)(AMAZON_GPTU+ 0x0000)) +#define AMAZON_GPTU_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) +#define AMAZON_GPTU_CLC_DISS (1 << 1) +#define AMAZON_GPTU_CLC_DISR (1 << 0) + +/***GPT Timer 3 Control Register***/ +#define AMAZON_GPTU_T3CON ((volatile u32*)(AMAZON_GPTU+ 0x0014)) +#define AMAZON_GPTU_T3CON_T3RDIR (1 << 15) +#define AMAZON_GPTU_T3CON_T3CHDIR (1 << 14) +#define AMAZON_GPTU_T3CON_T3EDGE (1 << 13) +#define AMAZON_GPTU_T3CON_BPS1(value) (((( 1 << 2) - 1) & (value)) << 11) +#define AMAZON_GPTU_T3CON_T3OTL (1 << 10) +#define AMAZON_GPTU_T3CON_T3UD (1 << 7) +#define AMAZON_GPTU_T3CON_T3R (1 << 6) +#define AMAZON_GPTU_T3CON_T3M(value) (((( 1 << 3) - 1) & (value)) << 3) +#define AMAZON_GPTU_T3CON_T3I(value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write Hardware Modified Timer 3 Control Register +If set and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define AMAZON_GPTU_WHBT3CON ((volatile u32*)(AMAZON_GPTU+ 0x004C)) +#define AMAZON_GPTU_WHBT3CON_SETT3CHDIR (1 << 15) +#define AMAZON_GPTU_WHBT3CON_CLRT3CHDIR (1 << 14) +#define AMAZON_GPTU_WHBT3CON_SETT3EDGE (1 << 13) +#define AMAZON_GPTU_WHBT3CON_CLRT3EDGE (1 << 12) +#define AMAZON_GPTU_WHBT3CON_SETT3OTL (1 << 11) +#define AMAZON_GPTU_WHBT3CON_CLRT3OTL (1 << 10) + +/***GPT Timer 2 Control Register***/ +#define AMAZON_GPTU_T2CON ((volatile u32*)(AMAZON_GPTU+ 0x0010)) +#define AMAZON_GPTU_T2CON_TxRDIR (1 << 15) +#define AMAZON_GPTU_T2CON_TxCHDIR (1 << 14) +#define AMAZON_GPTU_T2CON_TxEDGE (1 << 13) +#define AMAZON_GPTU_T2CON_TxIRDIS (1 << 12) +#define AMAZON_GPTU_T2CON_TxRC (1 << 9) +#define AMAZON_GPTU_T2CON_TxUD (1 << 7) +#define AMAZON_GPTU_T2CON_TxR (1 << 6) +#define AMAZON_GPTU_T2CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3) +#define AMAZON_GPTU_T2CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Timer 4 Control Register***/ +#define AMAZON_GPTU_T4CON ((volatile u32*)(AMAZON_GPTU+ 0x0018)) +#define AMAZON_GPTU_T4CON_TxRDIR (1 << 15) +#define AMAZON_GPTU_T4CON_TxCHDIR (1 << 14) +#define AMAZON_GPTU_T4CON_TxEDGE (1 << 13) +#define AMAZON_GPTU_T4CON_TxIRDIS (1 << 12) +#define AMAZON_GPTU_T4CON_TxRC (1 << 9) +#define AMAZON_GPTU_T4CON_TxUD (1 << 7) +#define AMAZON_GPTU_T4CON_TxR (1 << 6) +#define AMAZON_GPTU_T4CON_TxM(value) (((( 1 << 3) - 1) & (value)) << 3) +#define AMAZON_GPTU_T4CON_TxI(value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write HW Modified Timer 2 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define AMAZON_GPTU_WHBT2CON ((volatile u32*)(AMAZON_GPTU+ 0x0048)) +#define AMAZON_GPTU_WHBT2CON_SETTxCHDIR (1 << 15) +#define AMAZON_GPTU_WHBT2CON_CLRTxCHDIR (1 << 14) +#define AMAZON_GPTU_WHBT2CON_SETTxEDGE (1 << 13) +#define AMAZON_GPTU_WHBT2CON_CLRTxEDGE (1 << 12) + +/***GPT Write HW Modified Timer 4 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define AMAZON_GPTU_WHBT4CON ((volatile u32*)(AMAZON_GPTU+ 0x0050)) +#define AMAZON_GPTU_WHBT4CON_SETTxCHDIR (1 << 15) +#define AMAZON_GPTU_WHBT4CON_CLRTxCHDIR (1 << 14) +#define AMAZON_GPTU_WHBT4CON_SETTxEDGE (1 << 13) +#define AMAZON_GPTU_WHBT4CON_CLRTxEDGE (1 << 12) + +/***GPT Capture Reload Register***/ +#define AMAZON_GPTU_CAPREL ((volatile u32*)(AMAZON_GPTU+ 0x0030)) +#define AMAZON_GPTU_CAPREL_CAPREL(value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 2 Register***/ +#define AMAZON_GPTU_T2 ((volatile u32*)(AMAZON_GPTU+ 0x0034)) +#define AMAZON_GPTU_T2_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 3 Register***/ +#define AMAZON_GPTU_T3 ((volatile u32*)(AMAZON_GPTU+ 0x0038)) +#define AMAZON_GPTU_T3_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 4 Register***/ +#define AMAZON_GPTU_T4 ((volatile u32*)(AMAZON_GPTU+ 0x003C)) +#define AMAZON_GPTU_T4_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 5 Register***/ +#define AMAZON_GPTU_T5 ((volatile u32*)(AMAZON_GPTU+ 0x0040)) +#define AMAZON_GPTU_T5_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 6 Register***/ +#define AMAZON_GPTU_T6 ((volatile u32*)(AMAZON_GPTU+ 0x0044)) +#define AMAZON_GPTU_T6_TVAL(value) (((( 1 << 16) - 1) & (value)) << 0) + +/***GPT Timer 6 Control Register***/ +#define AMAZON_GPTU_T6CON ((volatile u32*)(AMAZON_GPTU+ 0x0020)) +#define AMAZON_GPTU_T6CON_T6SR (1 << 15) +#define AMAZON_GPTU_T6CON_T6CLR (1 << 14) +#define AMAZON_GPTU_T6CON_BPS2(value) (((( 1 << 2) - 1) & (value)) << 11) +#define AMAZON_GPTU_T6CON_T6OTL (1 << 10) +#define AMAZON_GPTU_T6CON_T6UD (1 << 7) +#define AMAZON_GPTU_T6CON_T6R (1 << 6) +#define AMAZON_GPTU_T6CON_T6M(value) (((( 1 << 3) - 1) & (value)) << 3) +#define AMAZON_GPTU_T6CON_T6I(value) (((( 1 << 3) - 1) & (value)) << 0) + +/***GPT Write HW Modified Timer 6 Control Register If set + and clear bit are written concurrently with 1, the associated bit is not changed.***/ +#define AMAZON_GPTU_WHBT6CON ((volatile u32*)(AMAZON_GPTU+ 0x0054)) +#define AMAZON_GPTU_WHBT6CON_SETT6OTL (1 << 11) +#define AMAZON_GPTU_WHBT6CON_CLRT6OTL (1 << 10) + +/***GPT Timer 5 Control Register***/ +#define AMAZON_GPTU_T5CON ((volatile u32*)(AMAZON_GPTU+ 0x001C)) +#define AMAZON_GPTU_T5CON_T5SC (1 << 15) +#define AMAZON_GPTU_T5CON_T5CLR (1 << 14) +#define AMAZON_GPTU_T5CON_CI(value) (((( 1 << 2) - 1) & (value)) << 12) +#define AMAZON_GPTU_T5CON_T5CC (1 << 11) +#define AMAZON_GPTU_T5CON_CT3 (1 << 10) +#define AMAZON_GPTU_T5CON_T5RC (1 << 9) +#define AMAZON_GPTU_T5CON_T5UDE (1 << 8) +#define AMAZON_GPTU_T5CON_T5UD (1 << 7) +#define AMAZON_GPTU_T5CON_T5R (1 << 6) +#define AMAZON_GPTU_T5CON_T5M(value) (((( 1 << 3) - 1) & (value)) << 3) +#define AMAZON_GPTU_T5CON_T5I(value) (((( 1 << 3) - 1) & (value)) << 0) + + +/***********************************************************************/ +/* Module : ASC register address and bits */ +/***********************************************************************/ + +#define AMAZON_ASC (KSEG1+0x10100400) +/***********************************************************************/ + + +/***ASC Port Input Select Register***/ +#define AMAZON_ASC_PISEL (AMAZON_ASC+ 0x0004) +#define AMAZON_ASC_PISEL_RIS (1 << 0) + +/***ASC Control Register***/ +#define AMAZON_ASC_CON (AMAZON_ASC+ 0x0010) +#define AMAZON_ASC_CON_R (1 << 15) +#define AMAZON_ASC_CON_LB (1 << 14) +#define AMAZON_ASC_CON_BRS (1 << 13) +#define AMAZON_ASC_CON_ODD (1 << 12) +#define AMAZON_ASC_CON_FDE (1 << 11) +#define AMAZON_ASC_CON_OE (1 << 10) +#define AMAZON_ASC_CON_FE (1 << 9) +#define AMAZON_ASC_CON_PE (1 << 8) +#define AMAZON_ASC_CON_OEN (1 << 7) +#define AMAZON_ASC_CON_FEN (1 << 6) +#define AMAZON_ASC_CON_PENRXDI (1 << 5) +#define AMAZON_ASC_CON_REN (1 << 4) +#define AMAZON_ASC_CON_STP (1 << 3) +#define AMAZON_ASC_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0) + +/***ASC Write Hardware Modified Control Register***/ +#define AMAZON_ASC_WHBCON (AMAZON_ASC+ 0x0050) +#define AMAZON_ASC_WHBCON_SETOE (1 << 13) +#define AMAZON_ASC_WHBCON_SETFE (1 << 12) +#define AMAZON_ASC_WHBCON_SETPE (1 << 11) +#define AMAZON_ASC_WHBCON_CLROE (1 << 10) +#define AMAZON_ASC_WHBCON_CLRFE (1 << 9) +#define AMAZON_ASC_WHBCON_CLRPE (1 << 8) +#define AMAZON_ASC_WHBCON_SETREN (1 << 5) +#define AMAZON_ASC_WHBCON_CLRREN (1 << 4) + +/***ASC Baudrate Timer/Reload Register***/ +#define AMAZON_ASC_BTR (AMAZON_ASC+ 0x0014) +#define AMAZON_ASC_BTR_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0) + +/***ASC Fractional Divider Register***/ +#define AMAZON_ASC_FDV (AMAZON_ASC+ 0x0018) +#define AMAZON_ASC_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) + +/***ASC IrDA Pulse Mode/Width Register***/ +#define AMAZON_ASC_PMW (AMAZON_ASC+ 0x001C) +#define AMAZON_ASC_PMW_IRPW (1 << 8) +#define AMAZON_ASC_PMW_PW_VALUE(value) (((( 1 << 8) - 1) & (value)) << 0) + +/***ASC Transmit Buffer Register***/ +#define AMAZON_ASC_TBUF (AMAZON_ASC+ 0x0020) +#define AMAZON_ASC_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) + +/***ASC Receive Buffer Register***/ +#define AMAZON_ASC_RBUF (AMAZON_ASC+ 0x0024) +#define AMAZON_ASC_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0) + +/***ASC Autobaud Control Register***/ +#define AMAZON_ASC_ABCON (AMAZON_ASC+ 0x0030) +#define AMAZON_ASC_ABCON_RXINV (1 << 11) +#define AMAZON_ASC_ABCON_TXINV (1 << 10) +#define AMAZON_ASC_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8) +#define AMAZON_ASC_ABCON_FCDETEN (1 << 4) +#define AMAZON_ASC_ABCON_ABDETEN (1 << 3) +#define AMAZON_ASC_ABCON_ABSTEN (1 << 2) +#define AMAZON_ASC_ABCON_AUREN (1 << 1) +#define AMAZON_ASC_ABCON_ABEN (1 << 0) + +/***Receive FIFO Control Register***/ +#define AMAZON_ASC_RXFCON (AMAZON_ASC+ 0x0040) +#define AMAZON_ASC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) +#define AMAZON_ASC_RXFCON_RXTMEN (1 << 2) +#define AMAZON_ASC_RXFCON_RXFFLU (1 << 1) +#define AMAZON_ASC_RXFCON_RXFEN (1 << 0) + +/***Transmit FIFO Control Register***/ +#define AMAZON_ASC_TXFCON (AMAZON_ASC+ 0x0044) +#define AMAZON_ASC_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8) +#define AMAZON_ASC_TXFCON_TXTMEN (1 << 2) +#define AMAZON_ASC_TXFCON_TXFFLU (1 << 1) +#define AMAZON_ASC_TXFCON_TXFEN (1 << 0) + +/***FIFO Status Register***/ +#define AMAZON_ASC_FSTAT (AMAZON_ASC+ 0x0048) +#define AMAZON_ASC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8) +#define AMAZON_ASC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0) + +/***ASC Write HW Modified Autobaud Control Register***/ +#define AMAZON_ASC_WHBABCON (AMAZON_ASC+ 0x0054) +#define AMAZON_ASC_WHBABCON_SETABEN (1 << 1) +#define AMAZON_ASC_WHBABCON_CLRABEN (1 << 0) + +/***ASC Autobaud Status Register***/ +#define AMAZON_ASC_ABSTAT (AMAZON_ASC+ 0x0034) +#define AMAZON_ASC_ABSTAT_DETWAIT (1 << 4) +#define AMAZON_ASC_ABSTAT_SCCDET (1 << 3) +#define AMAZON_ASC_ABSTAT_SCSDET (1 << 2) +#define AMAZON_ASC_ABSTAT_FCCDET (1 << 1) +#define AMAZON_ASC_ABSTAT_FCSDET (1 << 0) + +/***ASC Write HW Modified Autobaud Status Register***/ +#define AMAZON_ASC_WHBABSTAT (AMAZON_ASC+ 0x0058) +#define AMAZON_ASC_WHBABSTAT_SETDETWAIT (1 << 9) +#define AMAZON_ASC_WHBABSTAT_CLRDETWAIT (1 << 8) +#define AMAZON_ASC_WHBABSTAT_SETSCCDET (1 << 7) +#define AMAZON_ASC_WHBABSTAT_CLRSCCDET (1 << 6) +#define AMAZON_ASC_WHBABSTAT_SETSCSDET (1 << 5) +#define AMAZON_ASC_WHBABSTAT_CLRSCSDET (1 << 4) +#define AMAZON_ASC_WHBABSTAT_SETFCCDET (1 << 3) +#define AMAZON_ASC_WHBABSTAT_CLRFCCDET (1 << 2) +#define AMAZON_ASC_WHBABSTAT_SETFCSDET (1 << 1) +#define AMAZON_ASC_WHBABSTAT_CLRFCSDET (1 << 0) + +/***ASC Clock Control Register***/ +#define AMAZON_ASC_CLC (AMAZON_ASC+ 0x0000) +#define AMAZON_ASC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8) +#define AMAZON_ASC_CLC_DISS (1 << 1) +#define AMAZON_ASC_CLC_DISR (1 << 0) + +/***ASC IRNCR0 **/ +#define AMAZON_ASC_IRNCR0 (AMAZON_ASC+ 0x00FC) +/***ASC IRNCR1 **/ +#define AMAZON_ASC_IRNCR1 (AMAZON_ASC+ 0x00F8) +#define ASC_IRNCR_TIR 0x1 +#define ASC_IRNCR_RIR 0x2 +#define ASC_IRNCR_EIR 0x4 +/***********************************************************************/ +/* Module : DMA register address and bits */ +/***********************************************************************/ + +#define AMAZON_DMA (KSEG1+0x10103000) +/***********************************************************************/ +#define AMAZON_DMA_CH_ON AMAZON_DMA+0x28 +#define AMAZON_DMA_CH_RST AMAZON_DMA+0x2c +#define AMAZON_DMA_CH0_ISR AMAZON_DMA+0x30 +#define AMAZON_DMA_CH1_ISR AMAZON_DMA+0x34 +#define AMAZON_DMA_CH2_ISR AMAZON_DMA+0x38 +#define AMAZON_DMA_CH3_ISR AMAZON_DMA+0x3c +#define AMAZON_DMA_CH4_ISR AMAZON_DMA+0x40 +#define AMAZON_DMA_CH5_ISR AMAZON_DMA+0x44 +#define AMAZON_DMA_CH6_ISR AMAZON_DMA+0x48 +#define AMAZON_DMA_CH7_ISR AMAZON_DMA+0x4c +#define AMAZON_DMA_CH8_ISR AMAZON_DMA+0x50 +#define AMAZON_DMA_CH9_ISR AMAZON_DMA+0x54 +#define AMAZON_DMA_CH10_ISR AMAZON_DMA+0x58 +#define AMAZON_DMA_CH11_ISR AMAZON_DMA+0x5c +#define AMAZON_DMA_CH0_MSK AMAZON_DMA+0x60 +#define AMAZON_DMA_CH1_MSK AMAZON_DMA+0x64 +#define AMAZON_DMA_CH2_MSK AMAZON_DMA+0x68 +#define AMAZON_DMA_CH3_MSK AMAZON_DMA+0x6c +#define AMAZON_DMA_CH4_MSK AMAZON_DMA+0x70 +#define AMAZON_DMA_CH5_MSK AMAZON_DMA+0x74 +#define AMAZON_DMA_CH6_MSK AMAZON_DMA+0x78 +#define AMAZON_DMA_CH7_MSK AMAZON_DMA+0x7c +#define AMAZON_DMA_CH8_MSK AMAZON_DMA+0x80 +#define AMAZON_DMA_CH9_MSK AMAZON_DMA+0x84 +#define AMAZON_DMA_CH10_MSK AMAZON_DMA+0x88 +#define AMAZON_DMA_CH11_MSK AMAZON_DMA+0x8c +#define AMAZON_DMA_Desc_BA AMAZON_DMA+0x90 +#define AMAZON_DMA_CH0_DES_LEN AMAZON_DMA+0x94 +#define AMAZON_DMA_CH1_DES_LEN AMAZON_DMA+0x98 +#define AMAZON_DMA_CH2_DES_LEN AMAZON_DMA+0x9c +#define AMAZON_DMA_CH3_DES_LEN AMAZON_DMA+0xa0 +#define AMAZON_DMA_CH4_DES_LEN AMAZON_DMA+0xa4 +#define AMAZON_DMA_CH5_DES_LEN AMAZON_DMA+0xa8 +#define AMAZON_DMA_CH6_DES_LEN AMAZON_DMA+0xac +#define AMAZON_DMA_CH7_DES_LEN AMAZON_DMA+0xb0 +#define AMAZON_DMA_CH8_DES_LEN AMAZON_DMA+0xb4 +#define AMAZON_DMA_CH9_DES_LEN AMAZON_DMA+0xb8 +#define AMAZON_DMA_CH10_DES_LEN AMAZON_DMA+0xbc +#define AMAZON_DMA_CH11_DES_LEN AMAZON_DMA+0xc0 +#define AMAZON_DMA_CH1_DES_OFST AMAZON_DMA+0xc4 +#define AMAZON_DMA_CH2_DES_OFST AMAZON_DMA+0xc8 +#define AMAZON_DMA_CH3_DES_OFST AMAZON_DMA+0xcc +#define AMAZON_DMA_CH4_DES_OFST AMAZON_DMA+0xd0 +#define AMAZON_DMA_CH5_DES_OFST AMAZON_DMA+0xd4 +#define AMAZON_DMA_CH6_DES_OFST AMAZON_DMA+0xd8 +#define AMAZON_DMA_CH7_DES_OFST AMAZON_DMA+0xdc +#define AMAZON_DMA_CH8_DES_OFST AMAZON_DMA+0xe0 +#define AMAZON_DMA_CH9_DES_OFST AMAZON_DMA+0xe4 +#define AMAZON_DMA_CH10_DES_OFST AMAZON_DMA+0xe8 +#define AMAZON_DMA_CH11_DES_OFST AMAZON_DMA+0xec +#define AMAZON_DMA_SW_BL AMAZON_DMA+0xf0 +#define AMAZON_DMA_TPE_BL AMAZON_DMA+0xf4 +#define AMAZON_DMA_DPlus2FPI_BL AMAZON_DMA+0xf8 +#define AMAZON_DMA_GRX_BUF_LEN AMAZON_DMA+0xfc +#define AMAZON_DMA_DMA_ECON_REG AMAZON_DMA+0x100 +#define AMAZON_DMA_POLLING_REG AMAZON_DMA+0x104 +#define AMAZON_DMA_CH_WGT AMAZON_DMA+0x108 +#define AMAZON_DMA_TX_WGT AMAZON_DMA+0x10c +#define AMAZON_DMA_DPLus2FPI_CLASS AMAZON_DMA+0x110 +#define AMAZON_DMA_COMB_ISR AMAZON_DMA+0x114 + +//channel reset +#define SWITCH1_RST_MASK 0x83 /* Switch1 channel mask */ +#define SWITCH2_RST_MASK 0x10C /* Switch1 channel mask */ +#define TPE_RST_MASK 0x630 /* TPE channel mask */ +#define DPlus2FPI_RST_MASK 0x840 /* DPlusFPI channel mask */ + +//ISR +#define DMA_ISR_RDERR 0x20 +#define DMA_ISR_CMDCPT 0x10 +#define DMA_ISR_CPT 0x8 +#define DMA_ISR_DURR 0x4 +#define DMA_ISR_EOP 0x2 +#define DMA_DESC_BYTEOFF_SHIFT 23 + +#define DMA_POLLING_ENABLE 0x80000000 +#define DMA_POLLING_CNT 0x50 /*minimum 0x10, max 0xfff0*/ + +/***********************************************************************/ +/* Module : Debug register address and bits */ +/***********************************************************************/ + +#define AMAZON_DEBUG (KSEG1+0x1F106000) +/***********************************************************************/ + + +/***MCD Break System Control Register***/ +#define AMAZON_DEBUG_MCD_BSCR ((volatile u32*)(AMAZON_DEBUG+ 0x0000)) + +/***PMC Performance Counter Control Register0***/ +#define AMAZON_DEBUG_PMC_PCCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0010)) + +/***PMC Performance Counter Control Register1***/ +#define AMAZON_DEBUG_PMC_PCCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0014)) + +/***PMC Performance Counter Register0***/ +#define AMAZON_DEBUG_PMC_PCR0 ((volatile u32*)(AMAZON_DEBUG+ 0x0018)) + +/*165001:henryhsu:20050603:Source modified by Bing Tao*/ + +/***PMC Performance Counter Register1***/ +//#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x0020)) +#define AMAZON_DEBUG_PMC_PCR1 ((volatile u32*)(AMAZON_DEBUG+ 0x001c)) + +/*165001*/ + + + +/***MCD Suspend Mode Control Register***/ +#define AMAZON_DEBUG_MCD_SMCR ((volatile u32*)(AMAZON_DEBUG+ 0x0024)) + +/***********************************************************************/ +/* Module : GPIO register address and bits */ +/***********************************************************************/ + +#define AMAZON_GPIO (KSEG1+0x10100B00) +/***********************************************************************/ + + +/***Port 0 Data Output Register (0010H)***/ +#define AMAZON_GPIO_P0_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0010)) + +/***Port 1 Data Output Register (0040H)***/ +#define AMAZON_GPIO_P1_OUT ((volatile u32*)(AMAZON_GPIO+ 0x0040)) + +/***Port 0 Data Input Register (0014H)***/ +#define AMAZON_GPIO_P0_IN ((volatile u32*)(AMAZON_GPIO+ 0x0014)) + +/***Port 1 Data Input Register (0044H)***/ +#define AMAZON_GPIO_P1_IN ((volatile u32*)(AMAZON_GPIO+ 0x0044)) + +/***Port 0 Direction Register (0018H)***/ +#define AMAZON_GPIO_P0_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0018)) + +/***Port 1 Direction Register (0048H)***/ +#define AMAZON_GPIO_P1_DIR ((volatile u32*)(AMAZON_GPIO+ 0x0048)) + +/***Port 0 Alternate Function Select Register 0 (001C H) ***/ +#define AMAZON_GPIO_P0_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x001C)) + +/***Port 1 Alternate Function Select Register 0 (004C H) ***/ +#define AMAZON_GPIO_P1_ALTSEL0 ((volatile u32*)(AMAZON_GPIO+ 0x004C)) + +/***Port 0 Alternate Function Select Register 1 (0020 H) ***/ +#define AMAZON_GPIO_P0_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0020)) + +/***Port 1 Alternate Function Select Register 0 (0050 H) ***/ +#define AMAZON_GPIO_P1_ALTSEL1 ((volatile u32*)(AMAZON_GPIO+ 0x0050)) + +/***Port 0 Open Drain Control Register (0024H)***/ +#define AMAZON_GPIO_P0_OD ((volatile u32*)(AMAZON_GPIO+ 0x0024)) + +/***Port 1 Open Drain Control Register (0054H)***/ +#define AMAZON_GPIO_P1_OD ((volatile u32*)(AMAZON_GPIO+ 0x0054)) + +/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/ +#define AMAZON_GPIO_P0_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0028)) + +/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/ +#define AMAZON_GPIO_P1_STOFF ((volatile u32*)(AMAZON_GPIO+ 0x0058)) + +/***Port 0 Pull Up/Pull Down Select Register (002C H)***/ +#define AMAZON_GPIO_P0_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x002C)) + +/***Port 1 Pull Up/Pull Down Select Register (005C H)***/ +#define AMAZON_GPIO_P1_PUDSEL ((volatile u32*)(AMAZON_GPIO+ 0x005C)) + +/***Port 0 Pull Up Device Enable Register (0030 H)***/ +#define AMAZON_GPIO_P0_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0030)) + +/***Port 1 Pull Up Device Enable Register (0060 H)***/ +#define AMAZON_GPIO_P1_PUDEN ((volatile u32*)(AMAZON_GPIO+ 0x0060)) + +/***********************************************************************/ +/* Module : BIU register address and bits */ +/***********************************************************************/ + +#define AMAZON_BIU (KSEG1+0x1FA80000) +/***********************************************************************/ + + +/***BIU Identification Register***/ +#define AMAZON_BIU_ID ((volatile u32*)(AMAZON_BIU+ 0x0000)) +#define AMAZON_BIU_ID_ARCH (1 << 16) +#define AMAZON_BIU_ID_ID(value) (((( 1 << 8) - 1) & (value)) << 8) +#define AMAZON_BIU_ID_REV(value) (((( 1 << 8) - 1) & (value)) << 0) + +/***BIU Access Error Cause Register***/ +#define AMAZON_BIU_ERRCAUSE ((volatile u32*)(AMAZON_BIU+ 0x0100)) +#define AMAZON_BIU_ERRCAUSE_ERR (1 << 31) +#define AMAZON_BIU_ERRCAUSE_PORT(value) (((( 1 << 4) - 1) & (value)) << 16) +#define AMAZON_BIU_ERRCAUSE_CAUSE(value) (((( 1 << 2) - 1) & (value)) << 0) + +/***BIU Access Error Address Register***/ +#define AMAZON_BIU_ERRADDR ((volatile u32*)(AMAZON_BIU+ 0x0108)) +#define AMAZON_BIU_ERRADDR_ADDR + +/***********************************************************************/ +/* Module : ICU register address and bits */ +/***********************************************************************/ + +#define AMAZON_ICU (KSEG1+0x1F101000) +/***********************************************************************/ + +/***IM0 Interrupt Status Register***/ +#define AMAZON_ICU_IM0_ISR (AMAZON_ICU + 0x0010) +#define AMAZON_ICU_IM1_ISR (AMAZON_ICU + 0x0020) +#define AMAZON_ICU_IM2_ISR (AMAZON_ICU + 0x0030) +#define AMAZON_ICU_IM3_ISR (AMAZON_ICU + 0x0040) +#define AMAZON_ICU_IM4_ISR (AMAZON_ICU + 0x0050) + +/***IM0 Interrupt Enable Register***/ +#define AMAZON_ICU_IM0_IER (AMAZON_ICU + 0x0014) +#define AMAZON_ICU_IM1_IER (AMAZON_ICU + 0x0024) +#define AMAZON_ICU_IM2_IER (AMAZON_ICU + 0x0034) +#define AMAZON_ICU_IM3_IER (AMAZON_ICU + 0x0044) +#define AMAZON_ICU_IM4_IER (AMAZON_ICU + 0x0054) + +/***IM0 Interrupt Output Status Register***/ +#define AMAZON_ICU_IM0_IOSR (AMAZON_ICU + 0x0018) +#define AMAZON_ICU_IM1_IOSR (AMAZON_ICU + 0x0028) +#define AMAZON_ICU_IM2_IOSR (AMAZON_ICU + 0x0038) +#define AMAZON_ICU_IM3_IOSR (AMAZON_ICU + 0x0048) +#define AMAZON_ICU_IM4_IOSR (AMAZON_ICU + 0x0058) + +/***IM0 Interrupt Request Set Register***/ +#define AMAZON_ICU_IM0_IRSR (AMAZON_ICU + 0x001c) +#define AMAZON_ICU_IM1_IRSR (AMAZON_ICU + 0x002c) +#define AMAZON_ICU_IM2_IRSR (AMAZON_ICU + 0x003c) +#define AMAZON_ICU_IM3_IRSR (AMAZON_ICU + 0x004c) +#define AMAZON_ICU_IM4_IRSR (AMAZON_ICU + 0x005c) + +/***Interrupt Vector Value Register***/ +#define AMAZON_ICU_IM_VEC (AMAZON_ICU + 0x0060) + +/***Interrupt Vector Value Mask***/ +#define AMAZON_ICU_IM0_VEC_MASK 0x0000001f +#define AMAZON_ICU_IM1_VEC_MASK 0x000003e0 +#define AMAZON_ICU_IM2_VEC_MASK 0x00007c00 +#define AMAZON_ICU_IM3_VEC_MASK 0x000f8000 +#define AMAZON_ICU_IM4_VEC_MASK 0x01f00000 + +/***DMA Interrupt Mask Value***/ +#define AMAZON_DMA_H_MASK 0x00000fff + +/***External Interrupt Control Register***/ +#define AMAZON_ICU_EXTINTCR (AMAZON_ICU + 0x0000) +#define AMAZON_ICU_IRNICR (AMAZON_ICU + 0x0004) +#define AMAZON_ICU_IRNCR (AMAZON_ICU + 0x0008) +#define AMAZON_ICU_IRNEN (AMAZON_ICU + 0x000c) + +/***********************************************************************/ +/* Module : PCI/Card-BUS/PC-Card register address and bits */ +/***********************************************************************/ + +#define AMAZON_PCI (KSEG1+0x10105400) +#define AMAZON_PCI_CFG_BASE (KSEG1+0x11000000) +#define AMAZON_PCI_MEM_BASE (KSEG1+0x12000000) + +#define CLOCK_CONTROL AMAZON_PCI + 0x00000000 +#define ARB_CTRL_bit 1 +#define IDENTIFICATION AMAZON_PCI + 0x00000004 +#define SOFTRESET AMAZON_PCI + 0x00000010 +#define PCI_FPI_ERROR_ADDRESS AMAZON_PCI + 0x00000014 +#define FPI_PCI_ERROR_ADDRESS AMAZON_PCI + 0x00000018 +#define FPI_ERROR_TAG AMAZON_PCI + 0x0000001c +#define IRR AMAZON_PCI + 0x00000020 +#define IRA_IR AMAZON_PCI + 0x00000024 +#define IRM AMAZON_PCI + 0x00000028 +#define DMA_COMPLETE_BIT 0 +#define PCI_POWER_CHANGE_BIT 16 +#define PCI_MASTER0_BROKEN_INT_BIT 24 +#define PCI_MASTER1_BROKEN_INT_BIT 25 +#define PCI_MASTER2_BROKEN_INT_BIT 26 +#define EOI AMAZON_PCI + 0x0000002c +#define PCI_MODE AMAZON_PCI + 0x00000030 +#define PCI_MODE_cfgok_bit 24 +#define DEVICE_VENDOR_ID AMAZON_PCI + 0x00000034 +#define SUBSYSTEM_VENDOR_ID AMAZON_PCI + 0x00000038 +#define POWER_MANAGEMENT AMAZON_PCI + 0x0000003c +#define CLASS_CODE1 AMAZON_PCI + 0x00000040 +#define BAR11_MASK AMAZON_PCI + 0x00000044 +#define BAR12_MASK AMAZON_PCI + 0x00000048 +#define BAR13_MASK AMAZON_PCI + 0x0000004c +#define BAR14_MASK AMAZON_PCI + 0x00000050 +#define BAR15_MASK AMAZON_PCI + 0x00000054 +#define BAR16_MASK AMAZON_PCI + 0x00000058 +#define CARDBUS_CIS_POINTER1 AMAZON_PCI + 0x0000005c +#define SUBSYSTEM_ID1 AMAZON_PCI + 0x00000060 +#define PCI_ADDRESS_MAP_11 AMAZON_PCI + 0x00000064 +#define PCI_ADDRESS_MAP_12 AMAZON_PCI + 0x00000068 +#define PCI_ADDRESS_MAP_13 AMAZON_PCI + 0x0000006c +#define PCI_ADDRESS_MAP_14 AMAZON_PCI + 0x00000070 +#define PCI_ADDRESS_MAP_15 AMAZON_PCI + 0x00000074 +#define PCI_ADDRESS_MAP_16 AMAZON_PCI + 0x00000078 +#define FPI_SEGMENT_ENABLE AMAZON_PCI + 0x0000007c +#define CLASS_CODE2 AMAZON_PCI + 0x00000080 +#define BAR21_MASK AMAZON_PCI + 0x00000084 +#define BAR22_MASK AMAZON_PCI + 0x00000088 +#define BAR23_MASK AMAZON_PCI + 0x0000008c +#define BAR24_MASK AMAZON_PCI + 0x00000090 +#define BAR25_MASK AMAZON_PCI + 0x00000094 +#define BAR26_MASK AMAZON_PCI + 0x00000098 +#define CARDBUS_CIS_POINTER2 AMAZON_PCI + 0x0000009c +#define SUBSYSTEM_ID2 AMAZON_PCI + 0x000000a0 +#define PCI_ADDRESS_MAP_21 AMAZON_PCI + 0x000000a4 +#define PCI_ADDRESS_MAP_22 AMAZON_PCI + 0x000000a8 +#define PCI_ADDRESS_MAP_23 AMAZON_PCI + 0x000000ac +#define PCI_ADDRESS_MAP_24 AMAZON_PCI + 0x000000b0 +#define PCI_ADDRESS_MAP_25 AMAZON_PCI + 0x000000b4 +#define PCI_ADDRESS_MAP_26 AMAZON_PCI + 0x000000b8 +#define FPI_ADDRESS_MASK11LOW AMAZON_PCI + 0x000000bc +#define FPI_ADDRESS_MAP_0 AMAZON_PCI + 0x000000c0 +#define FPI_ADDRESS_MAP_1 AMAZON_PCI + 0x000000c4 +#define FPI_ADDRESS_MAP_2 AMAZON_PCI + 0x000000c8 +#define FPI_ADDRESS_MAP_3 AMAZON_PCI + 0x000000cc +#define FPI_ADDRESS_MAP_4 AMAZON_PCI + 0x000000d0 +#define FPI_ADDRESS_MAP_5 AMAZON_PCI + 0x000000d4 +#define FPI_ADDRESS_MAP_6 AMAZON_PCI + 0x000000d8 +#define FPI_ADDRESS_MAP_7 AMAZON_PCI + 0x000000dc +#define FPI_ADDRESS_MAP_11LOW AMAZON_PCI + 0x000000e0 +#define FPI_ADDRESS_MAP_11HIGH AMAZON_PCI + 0x000000e4 +#define FPI_BURST_LENGTH AMAZON_PCI + 0x000000e8 +#define SET_PCI_SERR AMAZON_PCI + 0x000000ec +#define DMA_FPI_START_ADDR AMAZON_PCI + 0x000000f0 +#define DMA_PCI_START_ADDR AMAZON_PCI + 0x000000f4 +#define DMA_TRANSFER_COUNT AMAZON_PCI + 0x000000f8 +#define DMA_CONTROL_STATUS AMAZON_PCI + 0x000000fc + +#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x0800 +#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1000 +#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x1800 +#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2000 +#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x2800 +#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3000 +#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x3800 +#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4000 +#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x4800 +#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5000 +#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x5800 +#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6000 +#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x6800 +#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7000 +#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x7800 +#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR AMAZON_PCI_CFG_BASE + 0XF000 +#define EXT_PCI_BAR1_ADDR 0x10 +#define EXT_PCI_BAR2_ADDR 0x14 +#define EXT_PCI_BAR3_ADDR 0x18 +#define EXT_PCI_BAR4_ADDR 0x1C +#define EXT_PCI_BAR5_ADDR 0x20 +#define EXT_PCI_BAR6_ADDR 0x24 + +#define DEVICE_ID_VECDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x0 +#define STATUS_COMMAND_ADDR AMAZON_PCI_CFG_BASE + 0x4 +#define BUS_MASTER_ENABLE_BIT 2 +#define MEM_SPACE_ENABLE_BIT 1 +#define CLASS_CODE_REVISION_ADDR AMAZON_PCI_CFG_BASE + 0x8 +#define BIST_HEADER_TYPE_LATENCY_CAHCE_ADDR AMAZON_PCI_CFG_BASE + 0xC +#define BAR1_ADDR AMAZON_PCI_CFG_BASE + 0x10 +#define BAR2_ADDR AMAZON_PCI_CFG_BASE + 0x14 +#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18 +#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C +#define BAR3_ADDR AMAZON_PCI_CFG_BASE + 0x18 +#define BAR4_ADDR AMAZON_PCI_CFG_BASE + 0x1C +#define BAR5_ADDR AMAZON_PCI_CFG_BASE + 0x20 +#define BAR6_ADDR AMAZON_PCI_CFG_BASE + 0x24 +#define CARDBUS_CIS_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x28 +#define SUBSYSTEM_ID_VENDOR_ID_ADDR AMAZON_PCI_CFG_BASE + 0x2C +#define EXPANSION_ROM_BASE_ADDR AMAZON_PCI_CFG_BASE + 0x30 +#define CAPABILITIES_POINTER_ADDR AMAZON_PCI_CFG_BASE + 0x34 +#define RESERVED_0x38 AMAZON_PCI_CFG_BASE + 0x38 +#define MAX_LAT_MIN_GNT_INT_PIN_LINE_ADDR AMAZON_PCI_CFG_BASE + 0x3C +#define POWER_MNGT_NEXT_POINTER_CAP_ID_ADDR AMAZON_PCI_CFG_BASE + 0x40 +#define POWER_MANAGEMENT_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x44 +#define RESERVED_0x48 AMAZON_PCI_CFG_BASE + 0x48 +#define RESERVED_0x4C AMAZON_PCI_CFG_BASE + 0x4C +#define ERROR_ADDR_PCI_FPI_ADDR AMAZON_PCI_CFG_BASE + 0x50 +#define ERROR_ADdR_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x54 +#define ERROR_TAG_FPI_PCI_ADDR AMAZON_PCI_CFG_BASE + 0x58 +#define PCI_ARB_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x5C +#define INTERNAL_ARB_ENABLE_BIT 0 +#define ARB_SCHEME_BIT 1 +#define PCI_MASTER0_PRIOR_2BITS 2 +#define PCI_MASTER1_PRIOR_2BITS 4 +#define PCI_MASTER2_PRIOR_2BITS 6 +#define PCI_MASTER0_REQ_MASK_2BITS 8 +#define PCI_MASTER1_REQ_MASK_2BITS 10 +#define PCI_MASTER2_REQ_MASK_2BITS 12 +#define PCI_MASTER0_GNT_MASK_2BITS 14 +#define PCI_MASTER1_GNT_MASK_2BITS 16 +#define PCI_MASTER2_GNT_MASK_2BITS 18 +#define FPI_PCI_INT_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x60 +#define FPI_PCI_INT_ACK_ADDR AMAZON_PCI_CFG_BASE + 0x64 +#define FPI_PCI_INT_MASK_ADDR AMAZON_PCI_CFG_BASE + 0x68 +#define CARDBUS_CTRL_STATUS_ADDR AMAZON_PCI_CFG_BASE + 0x6C +#define CARDBUS_CFRAME_ENABLE 0 + +#define CLOCK_CONTROL_default 0x00000000 +#define CLOCK_CONTROL_mask 0x00000003 + +#define IDENTIFICATION_default 0x0011C002 +#define IDENTIFICATION_mask 0x00000000 + +#define SOFTRESET_default 0x00000000 +// SOFTRESET bit 0 is writable but will be reset to 0 after software reset is over +#define SOFTRESET_mask 0x00000000 + +#define PCI_FPI_ERROR_ADDRESS_default 0xFFFFFFFF +#define PCI_FPI_ERROR_ADDRESS_mask 0x00000000 + +#define FPI_PCI_ERROR_ADDRESS_default 0xFFFFFFFF +#define FPI_PCI_ERROR_ADDRESS_mask 0x00000000 + +#define FPI_ERROR_TAG_default 0x0000000F +#define FPI_ERROR_TAG_mask 0x00000000 + +#define IRR_default 0x00000000 +#define IRR_mask 0x07013b2F + +#define IRA_IR_default 0x00000000 +#define IRA_IR_mask 0x07013b2F + +#define IRM_default 0x00000000 +#define IRM_mask 0xFFFFFFFF + +#define EOI_default 0x00000000 +#define EOI_mask 0x00000000 + +#define PCI_MODE_default 0x01000103 +#define PCI_MODE_mask 0x1107070F + +#define DEVICE_VENDOR_ID_default 0x000C15D1 +#define DEVICE_VENDOR_ID_mask 0xFFFFFFFF + +#define SUBSYSTEM_VENDOR_ID_default 0x000015D1 +#define SUBSYSTEM_VENDOR_ID_mask 0x0000FFFF + +#define POWER_MANAGEMENT_default 0x0000001B +#define POWER_MANAGEMENT_mask 0x0000001F + +#define CLASS_CODE1_default 0x00028000 +#define CLASS_CODE1_mask 0x00FFFFFF + +#define BAR11_MASK_default 0x0FF00008 +#define BAR11_MASK_mask 0x8FF00008 + +#define BAR12_MASK_default 0x80001800 +#define BAR12_MASK_mask 0x80001F08 + +#define BAR13_MASK_default 0x8FF00008 +#define BAR13_MASK_mask 0x8FF00008 + +#define BAR14_MASK_default 0x8F000000 +#define BAR14_MASK_mask 0x8FFFFF08 + +#define BAR15_MASK_default 0x80000000 +#define BAR15_MASK_mask 0x8FFFFF08 + +#define BAR16_MASK_default 0x80000001 +// bit 0 and bit 3 is mutually exclusive +#define BAR16_MASK_mask 0x8FFFFFF9 + +#define CARDBUS_CIS_POINTER1_default 0x00000000 +#define CARDBUS_CIS_POINTER1_mask 0x03FFFFFF + +#define SUBSYSTEM_ID1_default 0x0000000C +#define SUBSYSTEM_ID1_mask 0x0000FFFF + +#define PCI_ADDRESS_MAP_11_default 0x18000000 +#define PCI_ADDRESS_MAP_11_mask 0x7FFFFFF1 + +#define PCI_ADDRESS_MAP_12_default 0x18100000 +#define PCI_ADDRESS_MAP_12_mask 0x7FFFFF01 + +#define PCI_ADDRESS_MAP_13_default 0x18200000 +#define PCI_ADDRESS_MAP_13_mask 0x7FF00001 + +#define PCI_ADDRESS_MAP_14_default 0x70000000 +#define PCI_ADDRESS_MAP_14_mask 0x7FFFFF01 + +#define PCI_ADDRESS_MAP_15_default 0x00000001 +#define PCI_ADDRESS_MAP_15_mask 0x7FFFFF01 + +#define PCI_ADDRESS_MAP_16_default 0x60000000 +#define PCI_ADDRESS_MAP_16_mask 0x7FF00001 + +#define FPI_SEGMENT_ENABLE_default 0x000003FF +#define FPI_SEGMENT_ENABLE_mask 0x000003FF + +#define CLASS_CODE2_default 0x00FF0000 +#define CLASS_CODE2_mask 0x00FFFFFF + +#define BAR21_MASK_default 0x80000008 +#define BAR21_MASK_mask 0x8FFFFFF8 + +#define BAR22_MASK_default 0x80000008 +#define BAR22_MASK_mask 0x80001F08 + +#define BAR23_MASK_default 0x80000008 +#define BAR23_MASK_mask 0x8FF00008 + +#define BAR24_MASK_default 0x8FE00000 +#define BAR24_MASK_mask 0x8FFFFF08 + +#define BAR25_MASK_default 0x8FFFF000 +#define BAR25_MASK_mask 0x8FFFFF08 + +#define BAR26_MASK_default 0x8FFFFFE1 +#define BAR26_MASK_mask 0x8FFFFFF1 + +#define CARDBUS_CIS_POINTER2_default 0x00000000 +#define CARDBUS_CIS_POINTER2_mask 0x03FFFFFF + +#define SUBSYSTEM_ID2_default 0x0000000C +#define SUBSYSTEM_ID2_mask 0x0000FFFF + +#define PCI_ADDRESS_MAP_21_default 0x3FE00000 +#define PCI_ADDRESS_MAP_21_mask 0x7FFFFFF1 + +#define PCI_ADDRESS_MAP_22_default 0x68000000 +#define PCI_ADDRESS_MAP_22_mask 0x7FFFFF01 + +#define PCI_ADDRESS_MAP_23_default 0x20000000 +#define PCI_ADDRESS_MAP_23_mask 0x7FF00001 + +#define PCI_ADDRESS_MAP_24_default 0x70000001 +#define PCI_ADDRESS_MAP_24_mask 0x7FFFFF01 + +#define PCI_ADDRESS_MAP_25_default 0x78000001 +#define PCI_ADDRESS_MAP_25_mask 0x7FFFFF01 + +#define PCI_ADDRESS_MAP_26_default 0x20000000 +#define PCI_ADDRESS_MAP_26_mask 0x7FF00001 + +#define FPI_ADDRESS_MASK11LOW_default 0x00000000 +#define FPI_ADDRESS_MASK11LOW_mask 0x00070000 + +#define FPI_ADDRESS_MAP_0_default 0x00000000 +#define FPI_ADDRESS_MAP_0_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_1_default 0x10000000 +#define FPI_ADDRESS_MAP_1_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_2_default 0x20000000 +#define FPI_ADDRESS_MAP_2_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_3_default 0x30000000 +#define FPI_ADDRESS_MAP_3_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_4_default 0x40000000 +#define FPI_ADDRESS_MAP_4_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_5_default 0x50000000 +#define FPI_ADDRESS_MAP_5_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_6_default 0x60000000 +#define FPI_ADDRESS_MAP_6_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_7_default 0x70000000 +#define FPI_ADDRESS_MAP_7_mask 0xFFF00000 + +#define FPI_ADDRESS_MAP_11LOW_default 0xB0000000 +#define FPI_ADDRESS_MAP_11LOW_mask 0xFFFF0000 + +#define FPI_ADDRESS_MAP_11HIGH_default 0xB8000000 +#define FPI_ADDRESS_MAP_11HIGH_mask 0xFFF80000 + +#define FPI_BURST_LENGTH_default 0x00000000 +#define FPI_BURST_LENGTH_mask 0x00000303 + +#define SET_PCI_SERR_default 0x00000000 +#define SET_PCI_SERR_mask 0x00000000 + +#define DMA_FPI_START_ADDRESS_default 0x00000000 +#define DMA_FPI_START_ADDRESS_mask 0xFFFFFFFF + +#define DMA_PCI_START_ADDRESS_default 0x00000000 +#define DMA_PCI_START_ADDRESS_mask 0xFFFFFFFF + +#define DMA_TRANSFER_COUNT_default 0x00000000 +#define DMA_TRANSFER_COUNT_mask 0x0000FFFF + +#define DMA_CONTROL_STATUS_default 0x00000000 +#define DMA_CONTROL_STATUS_mask 0x00000000 // bit 0,1 is writable + +/***********************************************************************/ +#undef IKOS_MINI_BOOT //don't run a full booting +#ifdef CONFIG_USE_IKOS +#define CONFIG_USE_VENUS //Faster, 10M CPU and 192k baudrate +#ifdef CONFIG_USE_VENUS +#define IKOS_CPU_SPEED 10000000 +#else +#define IKOS_CPU_SPEED 180000 //IKOS is slow +#endif +#endif //CONFIG_USE_IKOS + +/* 165001:henryhsu:20050603:Source Modify form Bing Tao */ + +#if defined(CONFIG_NET_WIRELESS_SPURS) || defined(CONFIG_NET_WIRELESS_SPURS_MODULE) +#define EBU_PCI_SOFTWARE_ARBITOR +#endif + +#define AMAZON_B11 +#ifdef AMAZON_B11 +#define SWITCH_BUF_FPI_ADDR (0x10110000) +#define SWITCH_BUF_ADDR (KSEG1+SWITCH_BUF_FPI_ADDR) +#define SWITCH_BUF_SIZE (0x2800) +#define AMAZON_B11_CBM_QD_ADDR (SWITCH_BUF_ADDR+0x0) +#define AMAZON_B11_BOND_CELL_ADDR (SWITCH_BUF_ADDR+0x000) +#endif +#define AMAZON_REFERENCE_BOARD +//for AMAZON ATM bonding application +#ifdef AMAZON_REFERENCE_BOARD +#define GPIO_DETECT_LOW +#else +#undef GPIO_DETECT_LOW +#endif + +/* 165001 */ + +#undef AMAZON_IKOS_DEBUG_MSG +#undef AMAZON_INT_DEBUG_MSG +#undef AMAZON_ATM_DEBUG_MSG +#undef AMAZON_DMA_DEBUG_MSG +#undef AMAZON_SW_DEBUG_MSG +#undef AMAZON_WDT_DEBUG_MSG +#undef AMAZON_MTD_DEBUG_MSG +#undef AMAZON_SSC_DEBUG_MSG +#undef AMAZON_MEI_DEBUG_MSG + +#ifdef AMAZON_IKOS_DEBUG_MSG +#define AMAZON_IKOS_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args) +#else +#define AMAZON_IKOS_DMSG(fmt,args...) +#endif + +#ifdef AMAZON_WDT_DEBUG_MSG +#define AMAZON_WDT_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) +#else +#define AMAZON_WDT_DMSG(fm,args...) +#endif + +#ifdef AMAZON_SSC_DEBUG_MSG +#define AMAZON_SSC_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) +#else +#define AMAZON_SSC_DMSG(fm,args...) +#endif + +#ifdef AMAZON_DMA_DEBUG_MSG +#define AMAZON_DMA_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) +#else +#define AMAZON_DMA_DMSG(fm,args...) +#endif + +#ifdef AMAZON_ATM_DEBUG_MSG +#define AMAZON_TPE_DMSG(fmt, args...) printk( "%s: " fmt, __FUNCTION__ , ##args) +#else //not AMAZON_ATM_DEBUG +#define AMAZON_TPE_DMSG(fmt, args...) +#endif //AMAZON_ATM_DEBUG + +#ifdef AMAZON_SW_DEBUG_MSG +#define AMAZON_SW_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) +#else +#define AMAZON_SW_DMSG(fmt,args...) +#endif + +#ifdef AMAZON_MTD_DEBUG_MSG +#define AMAZON_MTD_DMSG(fmt,args...) printk("%s: " fmt, __FUNCTION__ , ##args) +#else +#define AMAZON_MTD_DMSG(fmt,args...) +#endif + +#ifdef AMAZON_INT_DEBUG_MSG +#define AMAZON_INT_DMSG(x...) printk(x) +#else +#define AMAZON_INT_DMSG(x...) +#endif + +#ifdef AMAZON_MEI_DEBUG_MSG +#define AMAZON_MEI_DMSG(fmt,args...) printk("%s:" fmt, __FUNCTION__, ##args) +#else +#define AMAZON_MEI_DMSG(fmt,args...) +#endif + +#endif //AMAZON_H diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h new file mode 100644 index 0000000000..63ab5924e5 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_dma.h @@ -0,0 +1,148 @@ +#ifndef AMAZON_DMA_H +#define AMAZON_DMA_H + +#define RCV_INT 1 +#define TX_BUF_FULL_INT 2 +#define TRANSMIT_CPT_INT 4 + +#define QOS_DEFAULT_WGT 0x7fffffffUL; + + +enum attr_t{ + TX=0, + RX=1, + RESERVED=2, + DEFAULT=3, + +}; + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +typedef struct rx_desc{ + u32 data_length:16; + volatile u32 reserved:7; + volatile u32 byte_offset:2; + volatile u32 Burst_length_offset:3; + volatile u32 EoP:1; + volatile u32 Res:1; + volatile u32 C:1; + volatile u32 OWN:1; + volatile u32 Data_Pointer; + /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/ +}_rx_desc; + + +typedef struct tx_desc{ + volatile u32 data_length:16; + volatile u32 reserved1:7; + volatile u32 byte_offset:5; + volatile u32 EoP:1; + volatile u32 SoP:1; + volatile u32 C:1; + volatile u32 OWN:1; + volatile u32 Data_Pointer;//fix me:should be 28 bits here +}_tx_desc; +#else //BIG +typedef struct rx_desc{ + union + { + struct + { + volatile u32 OWN :1; + volatile u32 C :1; + volatile u32 SoP :1; + volatile u32 EoP :1; + volatile u32 Burst_length_offset :3; + volatile u32 byte_offset :2; + volatile u32 reserve :7; + volatile u32 data_length :16; + }field; + + volatile u32 word; + }status; + + volatile u32 Data_Pointer; +}_rx_desc; + + +typedef struct tx_desc{ + union + { + struct + { + volatile u32 OWN :1; + volatile u32 C :1; + volatile u32 SoP :1; + volatile u32 EoP :1; + volatile u32 byte_offset :5; + volatile u32 reserved :7; + volatile u32 data_length :16; + }field; + + volatile u32 word; + }status; + + volatile u32 Data_Pointer; +}_tx_desc; + +#endif //ENDIAN + +struct dma_channel_info{ + /*filled by driver, optional*/ + enum attr_t attr;/*TX or RX*/ + int weight; + int desc_num; + int packet_size; + int control;/*on or off*/ + + int desc_base; + int status; +}; + +typedef struct dma_channel_info _dma_channel_info; + +struct dma_device_info{ + /*variables*/ + /*filled by driver, compulsary*/ + char device_name[15]; + enum attr_t attr;/*default or else*/ + int tx_burst_len; + int rx_burst_len; + + int logic_rx_chan_base; + int logic_tx_chan_base; + u8 on_ch_bit; + /*filled by driver, optional*/ + int weight; + int current_tx_chan; + int current_rx_chan; + int num_tx_chan; + int num_rx_chan; + struct dma_channel_info tx_chan[2]; + struct dma_channel_info rx_chan[4]; + + /*functions, optional*/ + u8* (*buffer_alloc)(int len,int* offset, void** opt); + int (*buffer_free)(u8* dataptr, void* opt); + int (*intr_handler)(struct dma_device_info* info, int status); + /*set by device, clear by dma*/ + int ack; + void * priv; /* used by peripheral driver only */ +}; +typedef struct dma_device_info _dma_device_info; + +int dma_device_register(struct dma_device_info* info); + +int dma_device_unregister(struct dma_device_info* info); + +int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt); + +int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt); + +int dma_device_update(struct dma_device_info* info); + +void dma_device_update_rx(struct dma_device_info* dma_dev); + +void dma_device_update_tx(struct dma_device_info* dma_dev); + +void register_handler_sim(int (*handler)(int)); +#endif /* AMAZON_DMA_H */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h new file mode 100644 index 0000000000..6ac8ab310b --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei.h @@ -0,0 +1,220 @@ +#ifndef _AMAZON_MEI_H +#define _AMAZON_MEI_H +///////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#include "amazon_mei_app.h" + +#define AMAZON_MEI_DEBUG_ON +#define AMAZON_MEI_CMV_EXTRA + +#define AMAZON_MEI_MAJOR 106 + +/* +** Define where in ME Processor's memory map the Stratify chip lives +*/ +#define MEI_SPACE_ACCESS 0xB0100C00 + +#define MAXSWAPSIZE 8 * 1024 //8k *(32bits) +//#define AMAZON_ADSL_IMAGESIZE 16*1024 // 16k * (32bits) + + +// Mailboxes +#define MSG_LENGTH 16 // x16 bits +#define YES_REPLY 1 +#define NO_REPLY 0 + +#define CMV_TIMEOUT 100 //jiffies +#define MIB_INTERVAL 10000 //msec + +/*** Bit definitions ***/ + +#define FALSE 0 +#define TRUE 1 +#define BIT0 1<<0 +#define BIT1 1<<1 +#define BIT2 1<<2 +#define BIT3 1<<3 +#define BIT4 1<<4 +#define BIT5 1<<5 +#define BIT6 1<<6 +#define BIT7 1<<7 +#define BIT8 1<<8 +#define BIT9 1<<9 +#define BIT10 1<<10 +#define BIT11 1<<11 +#define BIT12 1<<12 +#define BIT13 1<<13 +#define BIT14 1<<14 +#define BIT15 1<<15 +#define BIT16 1<<16 +#define BIT17 1<<17 +#define BIT18 1<<18 +#define BIT19 1<<19 +#define BIT20 1<<20 +#define BIT21 1<<21 +#define BIT22 1<<22 +#define BIT23 1<<23 +#define BIT24 1<<24 +#define BIT25 1<<25 +#define BIT26 1<<26 +#define BIT27 1<<27 +#define BIT28 1<<28 +#define BIT29 1<<29 +#define BIT30 1<<30 +#define BIT31 1<<31 + + +/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/ +#define MEI_DATA_XFR (0x0000 + MEI_SPACE_ACCESS) +#define MEI_VERSION (0x0200 + MEI_SPACE_ACCESS) +#define ARC_GP_STAT (0x0204 + MEI_SPACE_ACCESS) +#define MEI_XFR_ADDR (0x020C + MEI_SPACE_ACCESS) +#define MEI_TO_ARC_INT (0x021C + MEI_SPACE_ACCESS) +#define ARC_TO_MEI_INT (0x0220 + MEI_SPACE_ACCESS) +#define ARC_TO_MEI_INT_MASK (0x0224 + MEI_SPACE_ACCESS) +#define MEI_DEBUG_WAD (0x0228 + MEI_SPACE_ACCESS) +#define MEI_DEBUG_RAD (0x022C + MEI_SPACE_ACCESS) +#define MEI_DEBUG_DATA (0x0230 + MEI_SPACE_ACCESS) +#define MEI_DEBUG_DEC (0x0234 + MEI_SPACE_ACCESS) +#define MEI_CONTROL (0x0238 + MEI_SPACE_ACCESS) +#define AT_CELLRDY_BC0 (0x023C + MEI_SPACE_ACCESS) +#define AT_CELLRDY_BC1 (0x0240 + MEI_SPACE_ACCESS) +#define AR_CELLRDY_BC0 (0x0244 + MEI_SPACE_ACCESS) +#define AR_CELLRDY_BC1 (0x0248 + MEI_SPACE_ACCESS) +#define AAI_ACCESS (0x024C + MEI_SPACE_ACCESS) +#define AAITXCB0 (0x0300 + MEI_SPACE_ACCESS) +#define AAITXCB1 (0x0304 + MEI_SPACE_ACCESS) +#define AAIRXCB0 (0x0308 + MEI_SPACE_ACCESS) +#define AAIRXCB1 (0x030C + MEI_SPACE_ACCESS) + + +// MEI_TO_ARC_INTERRUPT Register definitions +#define MEI_TO_ARC_INT1 BIT3 +#define MEI_TO_ARC_INT0 BIT2 +#define MEI_TO_ARC_CS_DONE BIT1 +#define MEI_TO_ARC_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT Register definitions +#define ARC_TO_MEI_INT1 BIT8 +#define ARC_TO_MEI_INT0 BIT7 +#define ARC_TO_MEI_CS_REQ BIT6 +#define ARC_TO_MEI_DBG_DONE BIT5 +#define ARC_TO_MEI_MSGACK BIT4 +#define ARC_TO_MEI_NO_ACCESS BIT3 +#define ARC_TO_MEI_CHECK_AAITX BIT2 +#define ARC_TO_MEI_CHECK_AAIRX BIT1 +#define ARC_TO_MEI_MSGAV BIT0 + +// ARC_TO_MEI_INTERRUPT_MASK Register definitions +#define GP_INT1_EN BIT8 +#define GP_INT0_EN BIT7 +#define CS_REQ_EN BIT6 +#define DBG_DONE_EN BIT5 +#define MSGACK_EN BIT4 +#define NO_ACC_EN BIT3 +#define AAITX_EN BIT2 +#define AAIRX_EN BIT1 +#define MSGAV_EN BIT0 + +// MEI_CONTROL Register definitions +#define INT_LEVEL BIT2 +#define SOFT_RESET BIT1 +#define HOST_MSTR BIT0 + +// MEI_DEBUG_DECODE Register definitions +#define MEI_DEBUG_DEC_MASK (0x3) +#define MEI_DEBUG_DEC_AUX_MASK (0x0) +#define MEI_DEBUG_DEC_DMP1_MASK (0x1) +#define MEI_DEBUG_DEC_DMP2_MASK (0x2) +#define MEI_DEBUG_DEC_CORE_MASK (0x3) + + +// ARC_TO_MEI_MAILBOX[11] is a special location used to indicate +// page swap requests. +#define MEI_TO_ARC_MAILBOX (0x15FC0) +#define MEI_TO_ARC_MAILBOXR (0x15FEC) +#define ARC_TO_MEI_MAILBOX (0x15F90) +#define ARC_MEI_MAILBOXR (0x15FBC) + +// Codeswap request messages are indicated by setting BIT31 +#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK (0x80000000) + +/* +** Swap page header +*/ +// Page must be loaded at boot time if size field has BIT31 set +#define BOOT_FLAG (BIT31) +#define BOOT_FLAG_MASK ~BOOT_FLAG + +// Swap page header describes size in 32-bit words, load location, and image offset +// for program and/or data segments +typedef struct _arc_swp_page_hdr +{ + u32 p_offset; // Offset bytes of progseg from beginning of image + u32 p_dest; // Destination addr of progseg on processor + u32 p_size; // Size in 32-bitwords of program segment + u32 d_offset; // Offset bytes of dataseg from beginning of image + u32 d_dest; // Destination addr of dataseg on processor + u32 d_size; // Size in 32-bitwords of data segment +}ARC_SWP_PAGE_HDR; + + +/* +** Swap image header +*/ +#define GET_PROG 0 // Flag used for program mem segment +#define GET_DATA 1 // Flag used for data mem segment + +// Image header contains size of image, checksum for image, and count of +// page headers. Following that are 'count' page headers followed by +// the code and/or data segments to be loaded +typedef struct _arc_img_hdr +{ + u32 size; // Size of binary image in bytes + u32 checksum; // Checksum for image + u32 count; // Count of swp pages in image + ARC_SWP_PAGE_HDR page[1]; // Should be "count" pages - '1' to make compiler happy +}ARC_IMG_HDR; + + + +/* +** Native size for the Stratiphy interface is 32-bits. All reads and writes +** MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or +** byte data. Read routines are provided. Write routines are probably a bad idea, as the +** Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle +** could very well have unintended results. +*/ +MEI_ERROR meiCMV(u16 *, int); // first arg is CMV to ARC, second to indicate whether need reply + +void meiLongwordWrite(u32 ul_address, u32 ul_data); +void meiLongwordRead(u32 ul_address, u32 *pul_data); + + +MEI_ERROR meiDMAWrite(u32 destaddr, u32 *databuff, u32 databuffsize); +MEI_ERROR meiDebugWrite(u32 destaddr, u32 *databuff, u32 databuffsize); + +MEI_ERROR meiDMARead(u32 srcaddr, u32 *databuff, u32 databuffsize); +MEI_ERROR meiDebugRead(u32 srcaddr, u32 *databuff, u32 databuffsize); + +void meiPollForDbgDone(void); + +void meiMailboxInterruptsDisable(void); +void meiMailboxInterruptsEnable(void); + +MEI_ERROR meiMailboxWrite(u16 *msgsrcbuffer, u16 msgsize); +MEI_ERROR meiMailboxRead(u16 *msgdestbuffer, u16 msgsize); + +int meiGetPage( u32 Page, u32 data, u32 MaxSize, u32 *Buffer, u32 *Dest); + +MEI_ERROR meiHaltArc(void); +MEI_ERROR meiRunArc(void); + +MEI_ERROR meiDownloadBootCode(void); + +MEI_ERROR meiForceRebootAdslModem(void); + +void makeCMV(u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data); + +#endif + diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h new file mode 100644 index 0000000000..89700d9d76 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app.h @@ -0,0 +1,54 @@ +//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl + +#ifndef _AMAZON_MEI_APP_H +#define _AMAZON_MEI_APP_H + +///////////////////////////////////////////////////////////////////////////////////////////////////// + + // ioctl control +#define AMAZON_MEI_START 300 +#define AMAZON_MEI_REPLY 301 +#define AMAZON_MEI_NOREPLY 302 + +#define AMAZON_MEI_RESET 303 +#define AMAZON_MEI_REBOOT 304 +#define AMAZON_MEI_HALT 305 +#define AMAZON_MEI_CMV_WINHOST 306 +#define AMAZON_MEI_CMV_READ 307 +#define AMAZON_MEI_CMV_WRITE 308 +#define AMAZON_MEI_MIB_DAEMON 309 +#define AMAZON_MEI_SHOWTIME 310 +#define AMAZON_MEI_REMOTE 311 +#define AMAZON_MEI_READDEBUG 312 +#define AMAZON_MEI_WRITEDEBUG 313 +#define AMAZON_MEI_LOP 314 + +#define AMAZON_MEI_PCM_SETUP 315 +#define AMAZON_MEI_PCM_START_TIMER 316 +#define AMAZON_MEI_PCM_STOP_TIMER 317 +#define AMAZON_MEI_PCM_CHECK 318 +#define AMAZON_MEI_GET_EOC_LEN 319 +#define AMAZON_MEI_GET_EOC_DATA 320 +#define AMAZON_MEI_PCM_GETDATA 321 +#define AMAZON_MEI_PCM_GPIO 322 +#define AMAZON_MEI_EOC_SEND 323 +//MIB +#define AMAZON_MIB_LO_ATUC 324 +#define AMAZON_MIB_LO_ATUR 325 +#define AMAZON_MEI_DOWNLOAD 326 + +#define AMAZON_MEI_DEBUG_MODE 327 //509221:tc.chen +#define LOOP_DIAGNOSTIC_MODE_COMPLETE 328 + + +/*** Enums ***/ +typedef enum mei_error +{ + MEI_SUCCESS = 0, + MEI_FAILURE = -1, + MEI_MAILBOX_FULL = -2, + MEI_MAILBOX_EMPTY = -3, + MEI_MAILBOX_TIMEOUT = -4, +}MEI_ERROR; + +#endif diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h new file mode 100644 index 0000000000..d98f60b171 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_app_ioctl.h @@ -0,0 +1,1169 @@ +// 603221:tc.chen 2006/03/21 added APIs to support the WEB related parameters for ADSL Statistics + +#ifndef __AMAZON_MEI_APP_IOCTL_H +#define __AMAZON_MEI_APP_IOCTL_H + +#ifdef __KERNEL__ +#include "amazon_mei_ioctl.h" +#endif + +/* Interface Name */ +//#define INTERFACE_NAME + +/* adslLineTable constants */ +#define GET_ADSL_LINE_CODE 1 + +/* adslAtucPhysTable constants */ +#define GET_ADSL_ATUC_PHY 4 + +/* adslAturPhysTable constants */ +#define GET_ADSL_ATUR_PHY 10 + +/* adslAtucChanTable constants */ +#define GET_ADSL_ATUC_CHAN_INFO 15 + +/* adslAturChanTable constants */ +#define GET_ADSL_ATUR_CHAN_INFO 18 + +/* adslAtucPerfDataTable constants */ +#define GET_ADSL_ATUC_PERF_DATA 21 + +/* adslAturPerfDataTable constants */ +#define GET_ADSL_ATUR_PERF_DATA 40 + +/* adslAtucIntervalTable constants */ +#define GET_ADSL_ATUC_INTVL_INFO 60 + +/* adslAturIntervalTable constants */ +#define GET_ADSL_ATUR_INTVL_INFO 65 + +/* adslAtucChanPerfDataTable constants */ +#define GET_ADSL_ATUC_CHAN_PERF_DATA 70 + +/* adslAturChanPerfDataTable constants */ +#define GET_ADSL_ATUR_CHAN_PERF_DATA 90 + +/* adslAtucChanIntervalTable constants */ +#define GET_ADSL_ATUC_CHAN_INTVL_INFO 110 + +/* adslAturChanIntervalTable constants */ +#define GET_ADSL_ATUR_CHAN_INTVL_INFO 115 + +/* adslLineAlarmConfProfileTable constants */ +#define GET_ADSL_ALRM_CONF_PROF 120 +#define SET_ADSL_ALRM_CONF_PROF 121 + +/* adslAturTrap constants */ +#define ADSL_ATUR_TRAPS 135 + +////////////////// RFC-3440 ////////////// + +#ifdef AMAZON_MEI_MIB_RFC3440 +/* adslLineExtTable */ +#define GET_ADSL_ATUC_LINE_EXT 201 +#define SET_ADSL_ATUC_LINE_EXT 203 + +/* adslAtucPerfDateExtTable */ +#define GET_ADSL_ATUC_PERF_DATA_EXT 205 + +/* adslAtucIntervalExtTable */ +#define GET_ADSL_ATUC_INTVL_EXT_INFO 221 + +/* adslAturPerfDataExtTable */ +#define GET_ADSL_ATUR_PERF_DATA_EXT 225 + +/* adslAturIntervalExtTable */ +#define GET_ADSL_ATUR_INTVL_EXT_INFO 233 + +/* adslAlarmConfProfileExtTable */ +#define GET_ADSL_ALRM_CONF_PROF_EXT 235 +#define SET_ADSL_ALRM_CONF_PROF_EXT 236 + +/* adslAturExtTrap */ +#define ADSL_ATUR_EXT_TRAPS 240 + +#endif + +// 603221:tc.chen start +/* The following constants are added to support the WEB related ADSL Statistics */ + +/* adslLineStatus constants */ +#define GET_ADSL_LINE_STATUS 245 + +/* adslLineRate constants */ +#define GET_ADSL_LINE_RATE 250 + +/* adslLineInformation constants */ +#define GET_ADSL_LINE_INFO 255 + +/* adslNearEndPerformanceStats constants */ +#define GET_ADSL_NEAREND_STATS 270 + +/* adslFarEndPerformanceStats constants */ +#define GET_ADSL_FAREND_STATS 290 + +// 603221:tc.chen end + +/* Loop diagnostics mode of the ADSL line related constants */ +#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 295 +#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 296 +#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE 299 + +/* Sub-carrier related parameters */ +#define GET_ADSL_ATUC_SUBCARRIER_STATS 297 +#define GET_ADSL_ATUR_SUBCARRIER_STATS 298 +#define GET_ADSL_LINE_INIT_STATS 150 +#define GET_ADSL_POWER_SPECTRAL_DENSITY 151 + + +/////////////////////////////////////////////////////////// +// makeCMV(Opcode, Group, Address, Index, Size, Data) + +/* adslLineCode Flags */ +#define LINE_CODE_FLAG 0x1 /* BIT 0th position */ + +/* adslAtucPhysTable Flags */ +#define ATUC_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data) +#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data) + +#define ATUC_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ +#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data) + +#define ATUC_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ +#define ATUC_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data) + +#define ATUC_CURR_STAT_FLAG 0x8 /* BIT 3 */ + +#define ATUC_CURR_OUT_PWR_FLAG 0x10 /* BIT 4 */ +#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data) + +#define ATUC_CURR_ATTR_FLAG 0x20 /* BIT 5 */ +#define ATUC_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data) + + +/* adslAturPhysTable Flags */ +#define ATUR_PHY_SER_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1 makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data) +#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2 makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data) + +#define ATUR_PHY_VENDOR_ID_FLAG 0x2 /* BIT 1 */ +#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data) + +#define ATUR_PHY_VER_NUM_FLAG 0x4 /* BIT 2 */ +#define ATUR_PHY_VER_NUM_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data) + +#define ATUR_SNRMGN_FLAG 0x8 +#define ATUR_SNRMGN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data) + +#define ATUR_ATTN_FLAG 0x10 +#define ATUR_ATTN_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data) + +#define ATUR_CURR_STAT_FLAG 0x20 /* BIT 3 */ + +#define ATUR_CURR_OUT_PWR_FLAG 0x40 /* BIT 4 */ +#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data) + +#define ATUR_CURR_ATTR_FLAG 0x80 /* BIT 5 */ +#define ATUR_CURR_ATTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data) + +/* adslAtucChanTable Flags */ +#define ATUC_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ +#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data) + +#define ATUC_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ +#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data) + +#define ATUC_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ + +/* adslAturChanTable Flags */ +#define ATUR_CHAN_INTLV_DELAY_FLAG 0x1 /* BIT 0th position */ +#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data) + +#define ATUR_CHAN_CURR_TX_RATE_FLAG 0x2 /* BIT 1 */ +#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data) + +#define ATUR_CHAN_PREV_TX_RATE_FLAG 0x4 /* BIT 2 */ + +#define ATUR_CHAN_CRC_BLK_LEN_FLAG 0x8 /* BIT 3 */ + +/* adslAtucPerfDataTable Flags */ +#define ATUC_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_LOSS_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data) +#define ATUC_PERF_ESS_FLAG 0x4 /* BIT 2 */ +#define ATUC_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data) +#define ATUC_PERF_INITS_FLAG 0x8 /* BIT 3 */ +#define ATUC_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ +#define ATUC_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ +#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUC_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ +#define ATUC_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ +#define ATUC_PERF_CURR_15MIN_ESS_FLAG 0x200 /* BIT 9 */ +#define ATUC_PERF_CURR_15MIN_INIT_FLAG 0x400 /* BIT 10 */ +#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUC_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ +#define ATUC_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ +#define ATUC_PERF_CURR_1DAY_ESS_FLAG 0x4000 /* BIT 14 */ +#define ATUC_PERF_CURR_1DAY_INIT_FLAG 0x8000 /* BIT 15 */ +#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUC_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ +#define ATUC_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ +#define ATUC_PERF_PREV_1DAY_ESS_FLAG 0x80000 /* BIT 19 */ +#define ATUC_PERF_PREV_1DAY_INITS_FLAG 0x100000 /* BIT 20 */ + +/* adslAturPerfDataTable Flags */ +#define ATUR_PERF_LOFS_FLAG 0x1 /* BIT 0th position */ +#define ATUR_PERF_LOSS_FLAG 0x2 /* BIT 1 */ +#define ATUR_PERF_LPR_FLAG 0x4 /* BIT 2 */ +#define ATUR_PERF_LO_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data) +#define ATUR_PERF_ESS_FLAG 0x8 /* BIT 3 */ +#define ATUR_PERF_ESS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data) +#define ATUR_PERF_VALID_INTVLS_FLAG 0x10 /* BIT 4 */ +#define ATUR_PERF_INVALID_INTVLS_FLAG 0x20 /* BIT 5 */ +#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUR_PERF_CURR_15MIN_LOFS_FLAG 0x80 /* BIT 7 */ +#define ATUR_PERF_CURR_15MIN_LOSS_FLAG 0x100 /* BIT 8 */ +#define ATUR_PERF_CURR_15MIN_LPR_FLAG 0x200 /* BIT 9 */ +#define ATUR_PERF_CURR_15MIN_ESS_FLAG 0x400 /* BIT 10 */ +#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUR_PERF_CURR_1DAY_LOFS_FLAG 0x1000 /* BIT 12 */ +#define ATUR_PERF_CURR_1DAY_LOSS_FLAG 0x2000 /* BIT 13 */ +#define ATUR_PERF_CURR_1DAY_LPR_FLAG 0x4000 /* BIT 14 */ +#define ATUR_PERF_CURR_1DAY_ESS_FLAG 0x8000 /* BIT 15 */ +#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUR_PERF_PREV_1DAY_LOFS_FLAG 0x20000 /* BIT 17 */ +#define ATUR_PERF_PREV_1DAY_LOSS_FLAG 0x40000 /* BIT 18 */ +#define ATUR_PERF_PREV_1DAY_LPR_FLAG 0x80000 /* BIT 19 */ +#define ATUR_PERF_PREV_1DAY_ESS_FLAG 0x100000 /* BIT 20 */ + +/* adslAtucIntervalTable Flags */ +#define ATUC_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ +#define ATUC_INTVL_LOS_FLAG 0x2 /* BIT 1 */ +#define ATUC_INTVL_ESS_FLAG 0x4 /* BIT 2 */ +#define ATUC_INTVL_INIT_FLAG 0x8 /* BIT 3 */ +#define ATUC_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ + +/* adslAturIntervalTable Flags */ +#define ATUR_INTVL_LOF_FLAG 0x1 /* BIT 0th position */ +#define ATUR_INTVL_LOS_FLAG 0x2 /* BIT 1 */ +#define ATUR_INTVL_LPR_FLAG 0x4 /* BIT 2 */ +#define ATUR_INTVL_ESS_FLAG 0x8 /* BIT 3 */ +#define ATUR_INTVL_VALID_DATA_FLAG 0x10 /* BIT 4 */ + +/* adslAtucChanPerfDataTable Flags */ +#define ATUC_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ +#define ATUC_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ +#define ATUC_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ +#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ +#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ +#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ +#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ +#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ +#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ +#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ +#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/ +#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ +#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ +#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ +#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ +#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ +#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */ +#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ +#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ + + +/* adslAturChanPerfDataTable Flags */ +#define ATUR_CHAN_RECV_BLK_FLAG 0x01 /* BIT 0th position */ +#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) +#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) +#define ATUR_CHAN_TX_BLK_FLAG 0x02 /* BIT 1 */ +#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) +#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) +#define ATUR_CHAN_CORR_BLK_FLAG 0x04 /* BIT 2 */ +#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data) +#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data) +#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08 /* BIT 3 */ +#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data) +#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data) +#define ATUR_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */ +#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */ +#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */ +#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG 0x80 /* BIT 7 */ +#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */ +#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */ +#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */ +#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */ +#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */ +#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */ +#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */ +#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */ +#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */ +#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */ +#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG 0x40000 /* BIT 18 */ +#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */ +#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */ + +/* adslAtucChanIntervalTable Flags */ +#define ATUC_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th position */ +#define ATUC_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ +#define ATUC_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ +#define ATUC_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ +#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ +#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ + +/* adslAturChanIntervalTable Flags */ +#define ATUR_CHAN_INTVL_NUM_FLAG 0x1 /* BIT 0th Position */ +#define ATUR_CHAN_INTVL_RECV_BLK_FLAG 0x2 /* BIT 1 */ +#define ATUR_CHAN_INTVL_TX_BLK_FLAG 0x4 /* BIT 2 */ +#define ATUR_CHAN_INTVL_CORR_BLK_FLAG 0x8 /* BIT 3 */ +#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG 0x10 /* BIT 4 */ +#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 0x20 /* BIT 5 */ + +/* adslLineAlarmConfProfileTable Flags */ +#define ATUC_THRESH_15MIN_LOFS_FLAG 0x01 /* BIT 0th position */ +#define ATUC_THRESH_15MIN_LOSS_FLAG 0x02 /* BIT 1 */ +#define ATUC_THRESH_15MIN_ESS_FLAG 0x04 /* BIT 2 */ +#define ATUC_THRESH_FAST_RATEUP_FLAG 0x08 /* BIT 3 */ +#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG 0x10 /* BIT 4 */ +#define ATUC_THRESH_FAST_RATEDOWN_FLAG 0x20 /* BIT 5 */ +#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x40 /* BIT 6 */ +#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG 0x80 /* BIT 7 */ +#define ATUR_THRESH_15MIN_LOFS_FLAG 0x100 /* BIT 8 */ +#define ATUR_THRESH_15MIN_LOSS_FLAG 0x200 /* BIT 9 */ +#define ATUR_THRESH_15MIN_LPRS_FLAG 0x400 /* BIT 10 */ +#define ATUR_THRESH_15MIN_ESS_FLAG 0x800 /* BIT 11 */ +#define ATUR_THRESH_FAST_RATEUP_FLAG 0x1000 /* BIT 12 */ +#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG 0x2000 /* BIT 13 */ +#define ATUR_THRESH_FAST_RATEDOWN_FLAG 0x4000 /* BIT 14 */ +#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG 0x8000 /* BIT 15 */ +#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG 0x10000 /* BIT 16 */ + + +/* adslAturTraps Flags */ +#define ATUC_PERF_LOFS_THRESH_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_LOSS_THRESH_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_ESS_THRESH_FLAG 0x4 /* BIT 2 */ +#define ATUC_RATE_CHANGE_FLAG 0x8 /* BIT 3 */ +#define ATUR_PERF_LOFS_THRESH_FLAG 0x10 /* BIT 4 */ +#define ATUR_PERF_LOSS_THRESH_FLAG 0x20 /* BIT 5 */ +#define ATUR_PERF_LPRS_THRESH_FLAG 0x40 /* BIT 6 */ +#define ATUR_PERF_ESS_THRESH_FLAG 0x80 /* BIT 7 */ +#define ATUR_RATE_CHANGE_FLAG 0x100 /* BIT 8 */ + +//RFC- 3440 FLAG DEFINITIONS + +#ifdef AMAZON_MEI_MIB_RFC3440 +/* adslLineExtTable flags */ +#define ATUC_LINE_TRANS_CAP_FLAG 0x1 /* BIT 0th position */ +#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data) +#define ATUC_LINE_TRANS_CONFIG_FLAG 0x2 /* BIT 1 */ +#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data) +#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data) +#define ATUC_LINE_TRANS_ACTUAL_FLAG 0x4 /* BIT 2 */ +#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data) +#define LINE_GLITE_POWER_STATE_FLAG 0x8 /* BIT 3 */ +#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data) + +/* adslAtucPerfDataExtTable flags */ +#define ATUC_PERF_STAT_FASTR_FLAG 0x1 /* BIT 0th position */ +#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) +#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */ +#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) +#define ATUC_PERF_STAT_SESL_FLAG 0X4 /* BIT 2 */ +#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data) +#define ATUC_PERF_STAT_UASL_FLAG 0X8 /* BIT 3 */ +#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data) +#define ATUC_PERF_CURR_15MIN_FASTR_FLAG 0X10 /* BIT 4 */ +#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20 /* BIT 5 */ +#define ATUC_PERF_CURR_15MIN_SESL_FLAG 0X40 /* BIT 6 */ +#define ATUC_PERF_CURR_15MIN_UASL_FLAG 0X80 /* BIT 7 */ +#define ATUC_PERF_CURR_1DAY_FASTR_FLAG 0X100 /* BIT 8 */ +#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG 0X200 /* BIT 9 */ +#define ATUC_PERF_CURR_1DAY_SESL_FLAG 0X400 /* BIT 10 */ +#define ATUC_PERF_CURR_1DAY_UASL_FLAG 0X800 /* BIT 11 */ +#define ATUC_PERF_PREV_1DAY_FASTR_FLAG 0X1000 /* BIT 12 */ +#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG 0X2000 /* BIT 13 */ +#define ATUC_PERF_PREV_1DAY_SESL_FLAG 0X4000 /* BIT 14 */ +#define ATUC_PERF_PREV_1DAY_UASL_FLAG 0X8000 /* BIT 15 */ + +/* adslAturPerfDataExtTable */ +#define ATUR_PERF_STAT_SESL_FLAG 0X1 /* BIT 0th position */ +#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data) +#define ATUR_PERF_STAT_UASL_FLAG 0X2 /* BIT 1 */ +#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data) +#define ATUR_PERF_CURR_15MIN_SESL_FLAG 0X4 /* BIT 2 */ +#define ATUR_PERF_CURR_15MIN_UASL_FLAG 0X8 /* BIT 3 */ +#define ATUR_PERF_CURR_1DAY_SESL_FLAG 0X10 /* BIT 4 */ +#define ATUR_PERF_CURR_1DAY_UASL_FLAG 0X20 /* BIT 5 */ +#define ATUR_PERF_PREV_1DAY_SESL_FLAG 0X40 /* BIT 6 */ +#define ATUR_PERF_PREV_1DAY_UASL_FLAG 0X80 /* BIT 7 */ + +/* adslAutcIntervalExtTable flags */ +#define ATUC_INTERVAL_FASTR_FLAG 0x1 /* Bit 0 */ +#define ATUC_INTERVAL_FAILED_FASTR_FLAG 0x2 /* Bit 1 */ +#define ATUC_INTERVAL_SESL_FLAG 0x4 /* Bit 2 */ +#define ATUC_INTERVAL_UASL_FLAG 0x8 /* Bit 3 */ + +/* adslAturIntervalExtTable */ +#define ATUR_INTERVAL_SESL_FLAG 0X1 /* BIT 0th position */ +#define ATUR_INTERVAL_UASL_FLAG 0X2 /* BIT 1 */ + +/* adslAlarmConfProfileExtTable */ +#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */ +#define ATUC_THRESH_15MIN_SESL_FLAG 0X2 /* BIT 1 */ +#define ATUC_THRESH_15MIN_UASL_FLAG 0X4 /* BIT 2 */ +#define ATUR_THRESH_15MIN_SESL_FLAG 0X8 /* BIT 3 */ +#define ATUR_THRESH_15MIN_UASL_FLAG 0X10 /* BIT 4 */ + +/* adslAturExtTraps */ +#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 0X1 /* BIT 0th position */ +#define ATUC_15MIN_SESL_TRAP_FLAG 0X2 /* BIT 1 */ +#define ATUC_15MIN_UASL_TRAP_FLAG 0X4 /* BIT 2 */ +#define ATUR_15MIN_SESL_TRAP_FLAG 0X8 /* BIT 3 */ +#define ATUR_15MIN_UASL_TRAP_FLAG 0X10 /* BIT 4 */ + +// 603221:tc.chen start +/* adslLineStatus Flags */ +#define LINE_STAT_MODEM_STATUS_FLAG 0x1 /* BIT 0th position */ +#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data) +#define LINE_STAT_MODE_SEL_FLAG 0x2 /* BIT 1 */ +#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data) +#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */ +#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data) +#define LINE_STAT_LATENCY_FLAG 0x8 /* BIT 3 */ +#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data) + +/* adslLineRate Flags */ +#define LINE_RATE_DATA_RATEDS_FLAG 0x1 /* BIT 0th position */ +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data) + + +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data) + +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data) +#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data) + +#define LINE_RATE_DATA_RATEUS_FLAG 0x2 /* BIT 1 */ +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data) + + +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data) + +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data) +#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data) + +#define LINE_RATE_ATTNDRDS_FLAG 0x4 /* BIT 2 */ +#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data) + +#define LINE_RATE_ATTNDRUS_FLAG 0x8 /* BIT 3 */ +#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data) + +/* adslLineInformation Flags */ +#define LINE_INFO_INTLV_DEPTHDS_FLAG 0x1 /* BIT 0th position */ +#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data) +#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data) +#define LINE_INFO_INTLV_DEPTHUS_FLAG 0x2 /* BIT 1 */ +#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data) +#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data) +#define LINE_INFO_LATNDS_FLAG 0x4 /* BIT 2 */ +#define LINE_INFO_LATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data) +#define LINE_INFO_LATNUS_FLAG 0x8 /* BIT 3 */ +#define LINE_INFO_LATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data) +#define LINE_INFO_SATNDS_FLAG 0x10 /* BIT 4 */ +#define LINE_INFO_SATNDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data) +#define LINE_INFO_SATNUS_FLAG 0x20 /* BIT 5 */ +#define LINE_INFO_SATNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data) +#define LINE_INFO_SNRMNDS_FLAG 0x40 /* BIT 6 */ +#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data) +#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data) +#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data) +#define LINE_INFO_SNRMNUS_FLAG 0x80 /* BIT 7 */ +#define LINE_INFO_SNRMNUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data) +#define LINE_INFO_ACATPDS_FLAG 0x100 /* BIT 8 */ +#define LINE_INFO_ACATPDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data) +#define LINE_INFO_ACATPUS_FLAG 0x200 /* BIT 9 */ +#define LINE_INFO_ACATPUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data) + +/* adslNearEndPerformanceStats Flags */ +#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data) +#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data) +#define NEAREND_PERF_SUPERFRAME_FLAG 0x1 /* BIT 0th position */ +#define NEAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data) +#define NEAREND_PERF_LOS_FLAG 0x2 /* BIT 1 */ +#define NEAREND_PERF_LOF_FLAG 0x4 /* BIT 2 */ +#define NEAREND_PERF_LPR_FLAG 0x8 /* BIT 3 */ +#define NEAREND_PERF_NCD_FLAG 0x10 /* BIT 4 */ +#define NEAREND_PERF_LCD_FLAG 0x20 /* BIT 5 */ +#define NEAREND_PERF_CRC_FLAG 0x40 /* BIT 6 */ +#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data) +#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data) +#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data) +#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data) +#define NEAREND_PERF_RSCORR_FLAG 0x80 /* BIT 7 */ +#define NEAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data) +#define NEAREND_PERF_FECS_FLAG 0x100 /* BIT 8 */ +#define NEAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data) +#define NEAREND_PERF_ES_FLAG 0x200 /* BIT 9 */ +#define NEAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data) +#define NEAREND_PERF_SES_FLAG 0x400 /* BIT 10 */ +#define NEAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data) +#define NEAREND_PERF_LOSS_FLAG 0x800 /* BIT 11 */ +#define NEAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data) +#define NEAREND_PERF_UAS_FLAG 0x1000 /* BIT 12 */ +#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data) +#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data) +#define NEAREND_PERF_HECERR_FLAG 0x2000 /* BIT 13 */ + +/* adslFarEndPerformanceStats Flags */ +#define FAREND_PERF_LOS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data) +#define FAREND_PERF_LOS_FLAG 0x1 /* BIT 0th position */ +#define FAREND_PERF_LOF_FLAG 0x2 /* BIT 1 */ +#define FAREND_PERF_LPR_FLAG 0x4 /* BIT 2 */ +#define FAREND_PERF_NCD_FLAG 0x8 /* BIT 3 */ +#define FAREND_PERF_LCD_FLAG 0x10 /* BIT 4 */ +#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data) +#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data) +#define FAREND_PERF_CRC_FLAG 0x20 /* BIT 5 */ +#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data) +#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data) +#define FAREND_PERF_RSCORR_FLAG 0x40 /* BIT 6 */ +#define FAREND_PERF_FECS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data) +#define FAREND_PERF_FECS_FLAG 0x80 /* BIT 7 */ +#define FAREND_PERF_ES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data) +#define FAREND_PERF_ES_FLAG 0x100 /* BIT 8 */ +#define FAREND_PERF_SES_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data) +#define FAREND_PERF_SES_FLAG 0x200 /* BIT 9 */ +#define FAREND_PERF_LOSS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data) +#define FAREND_PERF_LOSS_FLAG 0x400 /* BIT 10 */ +#define FAREND_PERF_UAS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data) +#define FAREND_PERF_UAS_FLAG 0x800 /* BIT 11 */ +#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data) +#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data) +#define FAREND_PERF_HECERR_FLAG 0x1000 /* BIT 12 */ +// 603221:tc.chen end +/* TR-69 related additional parameters - defines */ +/* Defines for struct adslATURSubcarrierInfo */ +#define NEAREND_HLINSC 0x1 +#define NEAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 71, 2, 1, data) +#define NEAREND_HLINPS 0x2 +#define NEAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 73, idx, size, data) +#define NEAREND_HLOGMT 0x4 +#define NEAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 0, 1, data) +#define NEAREND_HLOGPS 0x8 +#define NEAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 75, idx, size, data) +#define NEAREND_QLNMT 0x10 +#define NEAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 1, 1, data) +#define NEAREND_QLNPS 0x20 +#define NEAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 77, idx, size, data) +#define NEAREND_SNRMT 0x40 +#define NEAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 80, 2, 1, data) +#define NEAREND_SNRPS 0x80 +#define NEAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 78, idx, size, data) +#define NEAREND_BITPS 0x100 +#define NEAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 22, idx, size, data) +#define NEAREND_GAINPS 0x200 +#define NEAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 24, idx, size, data) + +/* Defines for struct adslATUCSubcarrierInfo */ +#define FAREND_HLINSC 0x1 +#define FAREND_HLINSC_MAKECMV(mode) makeCMV(mode, INFO, 70, 0, 1, data) +#define FAREND_HLINPS 0x2 +#define FAREND_HLINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 72, idx, size, data) +#define FAREND_HLOGMT 0x4 +#define FAREND_HLOGMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 0, 1, data) +#define FAREND_HLOGPS 0x8 +#define FAREND_HLOGPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 74, idx, size, data) +#define FAREND_QLNMT 0x10 +#define FAREND_QLNMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 1, 1, data) +#define FAREND_QLNPS 0x20 +#define FAREND_QLNPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 76, idx, size, data) +#define FAREND_SNRMT 0x40 +#define FAREND_SNRMT_MAKECMV(mode) makeCMV(mode, INFO, 79, 2, 1, data) +#define FAREND_SNRPS 0x80 +#define FAREND_SNRPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 10, idx, size, data) +#define FAREND_BITPS 0x100 +#define FAREND_BITPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 23, idx, size, data) +#define FAREND_GAINPS 0x200 +#define FAREND_GAINPS_MAKECMV(mode,idx,size) makeCMV(mode, INFO, 25, idx, size, data) + + +// GET_ADSL_POWER_SPECTRAL_DENSITY +#define NOMPSD_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data) +#define NOMPSD_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data) +#define PCB_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data) +#define PCB_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data) +#define RMSGI_US_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data) +#define RMSGI_DS_MAKECMV makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data) + + +#endif +/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing + +#define SET_FLAG(flags, flag_val) ((*flags) = ((*flags) | flag_val)) +// -- This macro sets the flags with the flag_val. Here flags is passed as a pointer + +#define IS_FLAG_SET(flags, test_flag) (((*flags) & (test_flag)) == (test_flag)? test_flag:0) +// -- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer + + +#define CLR_FLAG(flags, flag_bit) ((*flags) = (*flags) & (~flag_bit)) +// -- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer + + +////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION + +//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type. + // +#define u32 unsigned int +#define u16 unsigned short +#define s16 short +#define u8 unsigned char + + +typedef u32 AdslPerfTimeElapsed; +typedef u32 AdslPerfPrevDayCount; +typedef u32 PerfCurrentCount; +typedef u32 PerfIntervalCount; +typedef u32 AdslPerfCurrDayCount; + + +//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry) + +typedef struct adslLineTableEntry { + int ifIndex; + int adslLineCode; + u8 flags; +} adslLineTableEntry; + +#ifdef AMAZON_MEI_MIB_RFC3440 +typedef struct adslLineExtTableEntry { + int ifIndex; + u16 adslLineTransAtucCap; + u16 adslLineTransAtucConfig; + u16 adslLineTransAtucActual; + int adslLineGlitePowerState; + u32 flags; +}adslLineExtTableEntry; +#endif +//ioctl(int fd, GET_ADSL_ATUC_PHY, void *struct_adslAtucPhysEntry) + +typedef struct adslVendorId { + u16 country_code; + u_char provider_id[4]; /* Ascii characters */ + u_char revision_info[2]; +}adslVendorId; + + +typedef struct adslAtucPhysEntry { + int ifIndex; + char serial_no[32]; + union { + char vendor_id[16]; + adslVendorId vendor_info; + } vendor_id; + + char version_no[16]; + u32 status; + int outputPwr; + u32 attainableRate; + u8 flags; +} adslAtucPhysEntry; + + +//ioctl(int fd, GET_ADSL_ATUR_PHY, void *struct_adslAturPhysEntry) + +typedef struct adslAturPhysEntry { + int ifIndex; + char serial_no[32]; + union { + char vendor_id[16]; + adslVendorId vendor_info; + } vendor_id; + char version_no[16]; + int SnrMgn; + u32 Attn; + u32 status; + int outputPwr; + u32 attainableRate; + u8 flags; +} adslAturPhysEntry; + + +//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo) + +typedef struct adslAtucChanInfo { + int ifIndex; + u32 interleaveDelay; + u32 currTxRate; + u32 prevTxRate; + u8 flags; +} adslAtucChanInfo; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo) + +typedef struct adslAturChanInfo { + int ifIndex; + u32 interleaveDelay; + u32 currTxRate; + u32 prevTxRate; + u32 crcBlkLen; + u8 flags; +} adslAturChanInfo; + + +//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA, void *struct_atucPerfDataEntry) + +typedef struct atucPerfDataEntry +{ + int ifIndex; + u32 adslAtucPerfLofs; + u32 adslAtucPerfLoss; + u32 adslAtucPerfESs; + u32 adslAtucPerfInits; + int adslAtucPerfValidIntervals; + int adslAtucPerfInvalidIntervals; + AdslPerfTimeElapsed adslAtucPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAtucPerfCurr15MinLofs; + PerfCurrentCount adslAtucPerfCurr15MinLoss; + PerfCurrentCount adslAtucPerfCurr15MinESs; + PerfCurrentCount adslAtucPerfCurr15MinInits; + AdslPerfTimeElapsed adslAtucPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs; + AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss; + AdslPerfCurrDayCount adslAtucPerfCurr1DayESs; + AdslPerfCurrDayCount adslAtucPerfCurr1DayInits; + int adslAtucPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss; + AdslPerfPrevDayCount adslAtucPerfPrev1DayESs; + AdslPerfPrevDayCount adslAtucPerfPrev1DayInits; + u32 flags; +} atucPerfDataEntry; + +#ifdef AMAZON_MEI_MIB_RFC3440 +typedef struct atucPerfDataExtEntry + { + int ifIndex; + u32 adslAtucPerfStatFastR; + u32 adslAtucPerfStatFailedFastR; + u32 adslAtucPerfStatSesL; + u32 adslAtucPerfStatUasL; + u32 adslAtucPerfCurr15MinFastR; + u32 adslAtucPerfCurr15MinFailedFastR; + u32 adslAtucPerfCurr15MinSesL; + u32 adslAtucPerfCurr15MinUasL; + u32 adslAtucPerfCurr1DayFastR; + u32 adslAtucPerfCurr1DayFailedFastR; + u32 adslAtucPerfCurr1DaySesL; + u32 adslAtucPerfCurr1DayUasL; + u32 adslAtucPerfPrev1DayFastR; + u32 adslAtucPerfPrev1DayFailedFastR; + u32 adslAtucPerfPrev1DaySesL; + u32 adslAtucPerfPrev1DayUasL; + u32 flags; +} atucPerfDataExtEntry; + +#endif +//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry) + +typedef struct aturPerfDataEntry +{ + int ifIndex; + u32 adslAturPerfLofs; + u32 adslAturPerfLoss; + u32 adslAturPerfLprs; + u32 adslAturPerfESs; + int adslAturPerfValidIntervals; + int adslAturPerfInvalidIntervals; + AdslPerfTimeElapsed adslAturPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAturPerfCurr15MinLofs; + PerfCurrentCount adslAturPerfCurr15MinLoss; + PerfCurrentCount adslAturPerfCurr15MinLprs; + PerfCurrentCount adslAturPerfCurr15MinESs; + AdslPerfTimeElapsed adslAturPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAturPerfCurr1DayLofs; + AdslPerfCurrDayCount adslAturPerfCurr1DayLoss; + AdslPerfCurrDayCount adslAturPerfCurr1DayLprs; + AdslPerfCurrDayCount adslAturPerfCurr1DayESs; + int adslAturPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAturPerfPrev1DayLofs; + AdslPerfPrevDayCount adslAturPerfPrev1DayLoss; + AdslPerfPrevDayCount adslAturPerfPrev1DayLprs; + AdslPerfPrevDayCount adslAturPerfPrev1DayESs; + u32 flags; +} aturPerfDataEntry; + +#ifdef AMAZON_MEI_MIB_RFC3440 +typedef struct aturPerfDataExtEntry + { + int ifIndex; + u32 adslAturPerfStatSesL; + u32 adslAturPerfStatUasL; + u32 adslAturPerfCurr15MinSesL; + u32 adslAturPerfCurr15MinUasL; + u32 adslAturPerfCurr1DaySesL; + u32 adslAturPerfCurr1DayUasL; + u32 adslAturPerfPrev1DaySesL; + u32 adslAturPerfPrev1DayUasL; + u32 flags; +} aturPerfDataExtEntry; +#endif +//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo) + +typedef struct adslAtucIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount intervalLOF; + PerfIntervalCount intervalLOS; + PerfIntervalCount intervalES; + PerfIntervalCount intervalInits; + int intervalValidData; + u8 flags; +} adslAtucIntvlInfo; + +#ifdef AMAZON_MEI_MIB_RFC3440 +typedef struct adslAtucInvtlExtInfo + { + int ifIndex; + int IntervalNumber; + u32 adslAtucIntervalFastR; + u32 adslAtucIntervalFailedFastR; + u32 adslAtucIntervalSesL; + u32 adslAtucIntervalUasL; + u32 flags; +} adslAtucInvtlExtInfo; +#endif +//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo) + +typedef struct adslAturIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount intervalLOF; + PerfIntervalCount intervalLOS; + PerfIntervalCount intervalLPR; + PerfIntervalCount intervalES; + int intervalValidData; + u8 flags; +} adslAturIntvlInfo; + +#ifdef AMAZON_MEI_MIB_RFC3440 +typedef struct adslAturInvtlExtInfo + { + int ifIndex; + int IntervalNumber; + u32 adslAturIntervalSesL; + u32 adslAturIntervalUasL; + u32 flags; +} adslAturInvtlExtInfo; +#endif +//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA, void *struct_atucChannelPerfDataEntry) + +typedef struct atucChannelPerfDataEntry +{ + int ifIndex; + u32 adslAtucChanReceivedBlks; + u32 adslAtucChanTransmittedBlks; + u32 adslAtucChanCorrectedBlks; + u32 adslAtucChanUncorrectBlks; + int adslAtucChanPerfValidIntervals; + int adslAtucChanPerfInvalidIntervals; + AdslPerfTimeElapsed adslAtucChanPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAtucChanPerfCurr15MinReceivedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinTransmittedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinCorrectedBlks; + PerfCurrentCount adslAtucChanPerfCurr15MinUncorrectBlks; + AdslPerfTimeElapsed adslAtucChanPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks; + AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks; + int adslAtucChanPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks; + AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks; + u32 flags; +}atucChannelPerfDataEntry; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA, void *struct_aturChannelPerfDataEntry) + +typedef struct aturChannelPerfDataEntry +{ + int ifIndex; + u32 adslAturChanReceivedBlks; + u32 adslAturChanTransmittedBlks; + u32 adslAturChanCorrectedBlks; + u32 adslAturChanUncorrectBlks; + int adslAturChanPerfValidIntervals; + int adslAturChanPerfInvalidIntervals; + AdslPerfTimeElapsed adslAturChanPerfCurr15MinTimeElapsed; + PerfCurrentCount adslAturChanPerfCurr15MinReceivedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinTransmittedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinCorrectedBlks; + PerfCurrentCount adslAturChanPerfCurr15MinUncorrectBlks; + AdslPerfTimeElapsed adslAturChanPerfCurr1DayTimeElapsed; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks; + AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks; + int adslAturChanPerfPrev1DayMoniSecs; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks; + AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks; + u32 flags; +} aturChannelPerfDataEntry; + + +//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo) + +typedef struct adslAtucChanIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount chanIntervalRecvdBlks; + PerfIntervalCount chanIntervalXmitBlks; + PerfIntervalCount chanIntervalCorrectedBlks; + PerfIntervalCount chanIntervalUncorrectBlks; + int intervalValidData; + u8 flags; +} adslAtucChanIntvlInfo; + + +//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo) + +typedef struct adslAturChanIntvlInfo { + int ifIndex; + int IntervalNumber; + PerfIntervalCount chanIntervalRecvdBlks; + PerfIntervalCount chanIntervalXmitBlks; + PerfIntervalCount chanIntervalCorrectedBlks; + PerfIntervalCount chanIntervalUncorrectBlks; + int intervalValidData; + u8 flags; +} adslAturChanIntvlInfo; + + +//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) +//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF, void *struct_adslLineAlarmConfProfileEntry) + +typedef struct adslLineAlarmConfProfileEntry + { + unsigned char adslLineAlarmConfProfileName[32]; + int adslAtucThresh15MinLofs; + int adslAtucThresh15MinLoss; + int adslAtucThresh15MinESs; + u32 adslAtucThreshFastRateUp; + u32 adslAtucThreshInterleaveRateUp; + u32 adslAtucThreshFastRateDown; + u32 adslAtucThreshInterleaveRateDown; + int adslAtucInitFailureTrapEnable; + int adslAturThresh15MinLofs; + int adslAturThresh15MinLoss; + int adslAturThresh15MinLprs; + int adslAturThresh15MinESs; + u32 adslAturThreshFastRateUp; + u32 adslAturThreshInterleaveRateUp; + u32 adslAturThreshFastRateDown; + u32 adslAturThreshInterleaveRateDown; + int adslLineAlarmConfProfileRowStatus; + u32 flags; +} adslLineAlarmConfProfileEntry; + +#ifdef AMAZON_MEI_MIB_RFC3440 +typedef struct adslLineAlarmConfProfileExtEntry + { + u8 adslLineAlarmConfProfileExtName[32]; + u32 adslAtucThreshold15MinFailedFastR; + u32 adslAtucThreshold15MinSesL; + u32 adslAtucThreshold15MinUasL; + u32 adslAturThreshold15MinSesL; + u32 adslAturThreshold15MinUasL; + u32 flags; +} adslLineAlarmConfProfileExtEntry; +#endif +//TRAPS + +// 603221:tc.chen start +/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */ +typedef struct adslLineStatus + { + int adslModemStatus; + u32 adslModeSelected; + int adslAtucThresh15MinESs; + int adslTrellisCodeEnable; + int adslLatency; + u8 flags; + } adslLineStatusInfo; + +typedef struct adslLineRate + { + u32 adslDataRateds; + u32 adslDataRateus; + u32 adslATTNDRds; + u32 adslATTNDRus; + u8 flags; + } adslLineRateInfo; + +typedef struct adslLineInfo + { + u32 adslInterleaveDepthds; + u32 adslInterleaveDepthus; + u32 adslLATNds; + u32 adslLATNus; + u32 adslSATNds; + u32 adslSATNus; + int adslSNRMds; + int adslSNRMus; + int adslACATPds; + int adslACATPus; + u32 flags; + } adslLineInfo; + +typedef struct adslNearEndPerfStats + { + u32 adslSuperFrames; + u32 adslneLOS; + u32 adslneLOF; + u32 adslneLPR; + u32 adslneNCD; + u32 adslneLCD; + u32 adslneCRC; + u32 adslneRSCorr; + u32 adslneFECS; + u32 adslneES; + u32 adslneSES; + u32 adslneLOSS; + u32 adslneUAS; + u32 adslneHECErrors; + u32 flags; + } adslNearEndPerfStats; + +typedef struct adslFarEndPerfStats + { + u32 adslfeLOS; + u32 adslfeLOF; + u32 adslfeLPR; + u32 adslfeNCD; + u32 adslfeLCD; + u32 adslfeCRC; + u32 adslfeRSCorr; + u32 adslfeFECS; + u32 adslfeES; + u32 adslfeSES; + u32 adslfeLOSS; + u32 adslfeUAS; + u32 adslfeHECErrors; + u32 flags; + } adslFarEndPerfStats; +// 603221:tc.chen end + +/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */ +typedef struct adslATURSubcarrierInfo { + int ifindex; + u16 HLINSCds; + u16 HLINpsds[1024];/* Even index = real part; Odd Index + = imaginary part for each tone */ + u16 HLOGMTds; + u16 HLOGpsds[512]; + u16 QLNMTds; + u16 QLNpsds[512]; + u16 SNRMTds; + u16 SNRpsds[512]; + u16 BITpsds[512]; + u16 GAINpsds[512]; + u16 flags; +}adslATURSubcarrierInfo; + +typedef struct adslATUCSubcarrierInfo { + int ifindex; + u16 HLINSCus; + u16 HLINpsus[128];/* Even index = real part; Odd Index + = imaginary part for each tone */ + u16 HLOGMTus; + u16 HLOGpsus[64]; + u16 QLNMTus; + u16 QLNpsus[64]; + u16 SNRMTus; + u16 SNRpsus[64]; + u16 BITpsus[64]; + u16 GAINpsus[64]; + u16 flags; +}adslATUCSubcarrierInfo; + +#ifndef u_int16 +#define u_int16 u16 +#endif + +typedef struct adslInitStats { + u_int16 FullInitializationCount; + u_int16 FailedFullInitializationCount; + u_int16 LINIT_Errors; + u_int16 Init_Timeouts; +}adslInitStats; + +typedef struct adslPowerSpectralDensity { + int ACTPSDds; + int ACTPSDus; +}adslPowerSpectralDensity; + + +//ioctl(int fd, ADSL_ATUR_TRAPS, void *uint16_flags) +typedef union structpts { + adslLineTableEntry * adslLineTableEntry_pt; + adslAtucPhysEntry * adslAtucPhysEntry_pt; + adslAturPhysEntry * adslAturPhysEntry_pt; + adslAtucChanInfo * adslAtucChanInfo_pt; + adslAturChanInfo * adslAturChanInfo_pt; + atucPerfDataEntry * atucPerfDataEntry_pt; + aturPerfDataEntry * aturPerfDataEntry_pt; + adslAtucIntvlInfo * adslAtucIntvlInfo_pt; + adslAturIntvlInfo * adslAturIntvlInfo_pt; + atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt; + aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt; + adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt; + adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt; + adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt; + // RFC 3440 + + #ifdef AMAZON_MEI_MIB_RFC3440 + adslLineExtTableEntry * adslLineExtTableEntry_pt; + atucPerfDataExtEntry * atucPerfDataExtEntry_pt; + adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt; + aturPerfDataExtEntry * aturPerfDataExtEntry_pt; + adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt; + adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt; + #endif +// 603221:tc.chen start + adslLineStatusInfo * adslLineStatusInfo_pt; + adslLineRateInfo * adslLineRateInfo_pt; + adslLineInfo * adslLineInfo_pt; + adslNearEndPerfStats * adslNearEndPerfStats_pt; + adslFarEndPerfStats * adslFarEndPerfStats_pt; +// 603221:tc.chen end + adslATUCSubcarrierInfo * adslATUCSubcarrierInfo_pt; + adslATURSubcarrierInfo * adslATURSubcarrierInfo_pt; + adslPowerSpectralDensity * adslPowerSpectralDensity_pt; +}structpts; + +#endif /* ] __AMAZON_MEI_APP_IOCTL_H */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h new file mode 100644 index 0000000000..02a150eac4 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_mei_ioctl.h @@ -0,0 +1,757 @@ +//509221:tc.chen 2005/09/22 Reset DFE added when MEI_TO_ARC_CS_DONE not cleared by ARC and Added AMAZON_MEI_DEBUG_MODE ioctl +#ifndef _AMAZON_MEI_IOCTL_H +#define _AMAZON_MEI_IOCTL_H + +///////////////////////////////////////////////////////////////////////////////////////////////////// +#define PCM_BUFF_SIZE 1024 //bytes +// interrupt numbers + +#ifndef _AMAZON_ADSL_APP + +typedef struct pcm_data_struct{ + u16 S; + u16 temp; + u16 LSW; + u16 MSW; + u16 len; + u16 rdindex; + u16 wrindex; + u16 flow; + + int finish; + u8 buff[PCM_BUFF_SIZE]; + int point; +}pcm_data_struct; + +typedef struct amazon_clreoc_pkt{ + struct list_head list; + u8 * command; //point to clreoc command data + int len; //command length +}amazon_clreoc_pkt; + +// Number of intervals +#define INTERVAL_NUM 192 //two days +typedef struct amazon_mei_mib{ + struct list_head list; + struct timeval start_time; //start of current interval + + int AtucPerfLof; + int AtucPerfLos; + int AtucPerfEs; + int AtucPerfInit; + + int AturPerfLof; + int AturPerfLos; + int AturPerfLpr; + int AturPerfEs; + + int AturChanPerfRxBlk; + int AturChanPerfTxBlk; + int AturChanPerfCorrBlk; + int AturChanPerfUncorrBlk; + + //RFC-3440 + int AtucPerfStatFastR; + int AtucPerfStatFailedFastR; + int AtucPerfStatSesL; + int AtucPerfStatUasL; + int AturPerfStatSesL; + int AturPerfStatUasL; +}amazon_mei_mib; + +typedef struct adslChanPrevTxRate{ + u32 adslAtucChanPrevTxRate; + u32 adslAturChanPrevTxRate; +}adslChanPrevTxRate; + +typedef struct adslPhysCurrStatus{ + u32 adslAtucCurrStatus; + u32 adslAturCurrStatus; +}adslPhysCurrStatus; + +typedef struct ChanType{ + int interleave; + int fast; +// 603221:tc.chen start + int bearchannel0; + int bearchannel1; +// 603221:tc.chen end +}ChanType; + +typedef struct mib_previous_read{ + u16 ATUC_PERF_ESS; + u16 ATUR_PERF_ESS; + u32 ATUR_CHAN_RECV_BLK; + u16 ATUR_CHAN_CORR_BLK_INTL; + u16 ATUR_CHAN_CORR_BLK_FAST; + u16 ATUR_CHAN_UNCORR_BLK_INTL; + u16 ATUR_CHAN_UNCORR_BLK_FAST; + u16 ATUC_PERF_STAT_FASTR; + u16 ATUC_PERF_STAT_FAILED_FASTR; + u16 ATUC_PERF_STAT_SESL; + u16 ATUC_PERF_STAT_UASL; + u16 ATUR_PERF_STAT_SESL; +}mib_previous_read; + +typedef struct mib_flags_pretime{ + struct timeval ATUC_PERF_LOSS_PTIME; + struct timeval ATUC_PERF_LOFS_PTIME; + struct timeval ATUR_PERF_LOSS_PTIME; + struct timeval ATUR_PERF_LOFS_PTIME; + struct timeval ATUR_PERF_LPR_PTIME; +}mib_flags_pretime; + + // cmv message structures +#define MP_PAYLOAD_SIZE 12 +typedef struct mpmessage{ + u16 iFunction; + u16 iGroup; + u16 iAddress; + u16 iIndex; + u16 iPayload[MP_PAYLOAD_SIZE]; +}MPMessage; +#endif + + +typedef struct meireg{ + u32 iAddress; + u32 iData; +}meireg; + +#define MEIDEBUG_BUFFER_SIZES 50 +typedef struct meidebug{ + u32 iAddress; + u32 iCount; + u32 buffer[MEIDEBUG_BUFFER_SIZES]; +}meidebug; + +//============================================================================== +// Group definitions +//============================================================================== +#define OPTN 5 +#define CNFG 8 +#define CNTL 1 +#define STAT 2 +#define RATE 6 +#define PLAM 7 +#define INFO 3 +#define TEST 4 +//============================================================================== +// Opcode definitions +//============================================================================== +#define H2D_CMV_READ 0x00 +#define H2D_CMV_WRITE 0x04 +#define H2D_CMV_INDICATE_REPLY 0x10 +#define H2D_ERROR_OPCODE_UNKNOWN 0x20 +#define H2D_ERROR_CMV_UNKNOWN 0x30 + +#define D2H_CMV_READ_REPLY 0x01 +#define D2H_CMV_WRITE_REPLY 0x05 +#define D2H_CMV_INDICATE 0x11 +#define D2H_ERROR_OPCODE_UNKNOWN 0x21 +#define D2H_ERROR_CMV_UNKNOWN 0x31 +#define D2H_ERROR_CMV_READ_NOT_AVAILABLE 0x41 +#define D2H_ERROR_CMV_WRITE_ONLY 0x51 +#define D2H_ERROR_CMV_READ_ONLY 0x61 + +#define H2D_DEBUG_READ_DM 0x02 +#define H2D_DEBUG_READ_PM 0x06 +#define H2D_DEBUG_WRITE_DM 0x0a +#define H2D_DEBUG_WRITE_PM 0x0e + +#define D2H_DEBUG_READ_DM_REPLY 0x03 +#define D2H_DEBUG_READ_FM_REPLY 0x07 +#define D2H_DEBUG_WRITE_DM_REPLY 0x0b +#define D2H_DEBUG_WRITE_FM_REPLY 0x0f +#define D2H_ERROR_ADDR_UNKNOWN 0x33 + +#define D2H_AUTONOMOUS_MODEM_READY_MSG 0xf1 +//============================================================================== +// INFO register address field definitions +//============================================================================== + +#define INFO_TxState 0 +#define INFO_RxState 1 +#define INFO_TxNextState 2 +#define INFO_RxNextState 3 +#define INFO_TxStateJumpFrom 4 +#define INFO_RxStateJumpFrom 5 + +#define INFO_ReverbSnrBuf 8 +#define INFO_ReverbEchoSnrBuf 9 +#define INFO_MedleySnrBuf 10 +#define INFO_RxShowtimeSnrBuf 11 +#define INFO_DECdelay 12 +#define INFO_DECExponent 13 +#define INFO_DECTaps 14 +#define INFO_AECdelay 15 +#define INFO_AECExponent 16 +#define INFO_AECTaps 17 +#define INFO_TDQExponent 18 +#define INFO_TDQTaps 19 +#define INFO_FDQExponent 20 +#define INFO_FDQTaps 21 +#define INFO_USBat 22 +#define INFO_DSBat 23 +#define INFO_USFineGains 24 +#define INFO_DSFineGains 25 +#define INFO_BitloadFirstChannel 26 +#define INFO_BitloadLastChannel 27 +#define INFO_PollEOCData 28 // CO specific +#define INFO_CSNRMargin 29 // CO specific +#define INFO_RCMsgs1 30 +#define INFO_RMsgs1 31 +#define INFO_RMsgRA 32 +#define INFO_RCMsgRA 33 +#define INFO_RMsg2 34 +#define INFO_RCMsg2 35 +#define INFO_BitLoadOK 36 +#define INFO_RCRates1 37 +#define INFO_RRates1Tab 38 +#define INFO_RMsgs1Tab 39 +#define INFO_RMsgRATab 40 +#define INFO_RRatesRA 41 +#define INFO_RCRatesRA 42 +#define INFO_RRates2 43 +#define INFO_RCRates2 44 +#define INFO_PackedRMsg2 45 +#define INFO_RxBitSwapFlag 46 +#define INFO_TxBitSwapFlag 47 +#define INFO_ShowtimeSNRUpdateCount 48 +#define INFO_ShowtimeFDQUpdateCount 49 +#define INFO_ShowtimeDECUpdateCount 50 +#define INFO_CopyRxBuffer 51 +#define INFO_RxToneBuf 52 +#define INFO_TxToneBuf 53 +#define INFO_Version 54 +#define INFO_TimeStamp 55 +#define INFO_feVendorID 56 +#define INFO_feSerialNum 57 +#define INFO_feVersionNum 58 +#define INFO_BulkMemory 59 //Points to start of bulk memory +#define INFO_neVendorID 60 +#define INFO_neVersionNum 61 +#define INFO_neSerialNum 62 + +//============================================================================== +// RATE register address field definitions +//============================================================================== + + +#define RATE_UsRate 0 +#define RATE_DsRate 1 + + +//============================================================================== +// PLAM (Physical Layer Management) register address field definitions +// (See G997.1 for reference) +//============================================================================== + + + // /// + // Failure Flags /// + // /// + +#define PLAM_NearEndFailureFlags 0 +#define PLAM_FarEndFailureFlags 1 + + // /// + // Near End Failure Flags Bit Definitions /// + // /// + +// ADSL Failures /// +#define PLAM_LOS_FailureBit 0x0001 +#define PLAM_LOF_FailureBit 0x0002 +#define PLAM_LPR_FailureBit 0x0004 +#define PLAM_RFI_FailureBit 0x0008 + +// ATM Failures /// +#define PLAM_NCD_LP0_FailureBit 0x0010 +#define PLAM_NCD_LP1_FailureBit 0x0020 +#define PLAM_LCD_LP0_FailureBit 0x0040 +#define PLAM_LCD_LP1_FailureBit 0x0080 + +#define PLAM_NCD_BC0_FailureBit 0x0100 +#define PLAM_NCD_BC1_FailureBit 0x0200 +#define PLAM_LCD_BC0_FailureBit 0x0400 +#define PLAM_LCD_BC1_FailureBit 0x0800 + // /// + // Performance Counts /// + // /// + +#define PLAM_NearEndCrcCnt 2 +#define PLAM_CorrectedRSErrors 3 + +#define PLAM_NearEndECSCnt 6 +#define PLAM_NearEndESCnt 7 +#define PLAM_NearEndSESCnt 8 +#define PLAM_NearEndLOSSCnt 9 +#define PLAM_NearEndUASLCnt 10 + +#define PLAM_NearEndHECErrCnt 11 + +#define PLAM_NearEndHECTotCnt 16 +#define PLAM_NearEndCellTotCnt 18 +#define PLAM_NearEndSfCntLSW 20 +#define PLAM_NearEndSfCntMSW 21 + +#define PLAM_FarEndFebeCnt 24 + +#define PLAM_FarEndFecCnt 28 + +#define PLAM_FarEndFECSCnt 32 +#define PLAM_FarEndESCnt 33 +#define PLAM_FarEndSESCnt 34 +#define PLAM_FarEndLOSSCnt 35 +#define PLAM_FarEndUASLCnt 36 + +#define PLAM_FarEndHECErrCnt 37 + +#define PLAM_FarEndHECTotCnt 41 + +#define PLAM_FarEndCellTotCnt 43 + +#define PLAM_LineAttn 45 +#define PLAM_SNRMargin 46 + + +//============================================================================== +// CNTL register address and bit field definitions +//============================================================================== + + +#define CNTL_ModemControl 0 + +#define CNTL_ModemReset 0x0 +#define CNTL_ModemStart 0x2 + + +//============================================================================== +// STAT register address and bit field definitions +//============================================================================== + +#define STAT_MacroState 0 +#define STAT_Mode 1 +#define STAT_DMTFramingMode 2 +#define STAT_SleepState 3 +#define STAT_Misc 4 +#define STAT_FailureState 5 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_OLRStatus provides status of OLR + //16-bit STAT_OLRStatus_DS + // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted + // [3:2]: Reserved + // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) + // [7:6]: Reserved + // [10:8]: >0=Request. 0=not. For DS, # of request transmissions/retransmissions (3 bits). + // [11]: 1=Receive Response, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_OLRStatus_DS 6 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_OLRStatus provides status of OLR + // 16-bit STAT_OLRStatus_US CMV + // [1:0] : OLR status 00=IDLE, 01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted + // [3:2]: Reserved + // [5:4]: OLR_Type (1:bitswap; 2: DRR; 3: SRA) + // [7:6]: Reserved + // [8]: 1=Request Received. 0=not. + // [10:9]: Reserved + // [11]: 1=Response Sent, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +/// +#define STAT_OLRStatus_US 7 + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // STAT_PMStatus provides status of PM + // 16-bit STAT_PMStatus CMV + // [1:0] : PM Status 00=IDLE, 01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted + // [2] : 0=ATU_R initiated PM; 1 = ATU_C initiated PM + // [3]: Reserved + // [5:4]: PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim) + // [7:6]: Reserved + // [10:8]: >0=Request. 0=not. # of request transmissions/retransmissions (3 bits). + // [11]: 1=Response, 0=not + // [15:12]: Reserved + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_PMStatus 8 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError + // [3:0]: OLR/PM response reason code + // [7:4]: OLR/PM Internal error code + // [15:8]: OLR/PM Reserved for future + ////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + /// +#define STAT_OLRError_DS 9 +#define STAT_OLRError_US 10 +#define STAT_PMError 11 + + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_MacroState +// MacroState reflects the high level state of the modem + +#define STAT_InitState 0x0000 +#define STAT_ReadyState 0x0001 +#define STAT_FailState 0x0002 +#define STAT_IdleState 0x0003 +#define STAT_QuietState 0x0004 +#define STAT_GhsState 0x0005 +#define STAT_FullInitState 0x0006 +#define STAT_ShowTimeState 0x0007 +#define STAT_FastRetrainState 0x0008 +#define STAT_LoopDiagMode 0x0009 +#define STAT_ShortInit 0x000A // Bis short initialization /// + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_Mode +// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use +// G.Hs or some other mechanism to negotiate the specific mode of operation. +// The OPTN_modeControl CMV is used to select a set of desired modes. +// The STAT_Mode CMV indicates which mode was actually selected. + +#define STAT_ConfigMode_T1413 0x0001 +#define STAT_ConfigMode_G992_2_AB 0x0002 +#define STAT_ConfigMode_G992_1_A 0x0004 +#define STAT_ConfigMode_G992_1_B 0x0008 +#define STAT_ConfigMode_G992_1_C 0x0010 +#define STAT_ConfigMode_G992_2_C 0x0020 + +#define STAT_ConfigMode_G992_3_A 0x0100 +#define STAT_ConfigMode_G992_3_B 0x0200 +#define STAT_ConfigMode_G992_3_I 0x0400 +#define STAT_ConfigMode_G992_3_J 0x0800 +#define STAT_ConfigMode_G992_3_L 0x1000 + +#define STAT_ConfigMode_G992_4_A 0x2000 +#define STAT_ConfigMode_G992_4_I 0x4000 + +#define STAT_ConfigMode_G992_5 0x8000 + + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_DMTFramingMode +// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode +// status is not applicable in BIS mode and its value is undefined +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_FramingModeMask 0x0003 + + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_Misc +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_OverlappedSpectrum 0x0008 +#define STAT_TCM 0x0010 +#define STAT_TDQ_at_1104 0x0020 +#define STAT_T1413_Signal_Detected 0x0040 +#define STAT_AnnexL_US_Mask1_PSD 0x1000 //indicate we actually selected G992.3 AnnexL US PSD mask1 +#define STAT_AnnexL_US_Mask2_PSD 0x2000 //indicate we actually selected G992.3 AnnexL US PSD mask2 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// STAT_FailureState +// when the MacroSTate indicates the fail state, FailureState provides a failure code +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + + +#define E_CODE_NO_ERROR 0 +#define E_CODE_BAT_TX 1 // TX BAT table is incorrect */ +#define E_CODE_BAT_RX 2 // RX BAT table is incorrect */ +#define E_CODE_PROFILE 3 // profile is not selected in fast retrain */ +#define E_CODE_TX_AOC_FIFO_OVERFLOW 4 +#define E_CODE_TRUNCATE_FR 5 //Fast Retrain truncated due to no stored profiles*/ +#define E_CODE_BITLOAD 6 // bit loading fails */ +#define E_CODE_ST_ERROR 7 // showtime CRC error */ +#define E_CODE_RESERVED 8 // using parameters reserved by the ITU-T */ +#define E_CODE_C_TONES 9 // detected C_TONES */ +#define E_CODE_CODESWAP_ERR 10 // codeswap not finished in time */ +#define E_CODE_FIFO_OVERFLOW 11 // we have run out of fifo space */ +#define E_CODE_C_BG_DECODE_ERR 12 // error in decoding C-BG message */ +#define E_CODE_C_RATES2_DECODE_ERR 13 // error in decoding C-MSGS2 and C-RATES2 */ +#define E_CODE_RCMedleyRx_C_SEGUE2_Failure 14 // Timeout after RCMedleyRx waiting for C_SEGUE2 */ +#define E_CODE_RReverbRATx_C_SEGUE2_Failure 15 // Timeout after RReverbRATx waiting for C_SEGUE2 */ +#define E_CODE_RReverb3Tx_C_SEGUE1_Failure 16 // Timeout after RReverb3Tx waiting for C_SEGUE1 */ +#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR 17 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR 18 // Received CRC not equal to computed CRC */ +#define E_CODE_RReverb5Tx_C_SEGUE2_Failure 19 // Timeout after RReverb5Tx waiting for C_SEGUE2 */ +#define E_CODE_RReverb6Tx_C_SEGUE3_Failure 20 // Timeout after RReverb6Tx waiting for C_SEGUE3 */ +#define E_CODE_RSegue5Tx_C_SEGUE3_Failure 21 // Timeout after RSegue5Tx waiting for C_SEGUE3 */ +#define E_CODE_RCReverb5Rx_C_SEGUE_Failure 22 // Timeout after RCReverb5Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbRARx_C_SEGUE2_Failure 23 // Timeout after RCReverbRARx waiting for C_SEGUE2 */ +#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR 24 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR 25 // Received CRC not equal to computed CRC */ +#define E_CODE_RCCRC3Rx_DECOD_ERR 26 // Received CRC not equal to computed CRC */ +#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT 27 // DEC Path Delay timeout */ +#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT 28 // DEC Training timeout */ +#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure 29 // Timeout after RCReverb3Rx waiting for C_SEGUE1 */ +#define E_CODE_RCReverb2Rx_SignalEnd_Failure 30 // Timeout waiting for the end of RCReverb2Rx signal */ +#define E_CODE_RQuiet2_SignalEnd_Failure 31 // Timeout waiting for the end of RQuiet2 signal */ +#define E_CODE_RCReverbFR1Rx_Failure 32 // Timeout waiting for the end of RCReverbFR1Rx signal */ +#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure 33 // Timeout waiting for the end of RCPilotFR1Rx signal */ +#define E_CODE_RCReverbFR2Rx_C_Segue_Failure 34 // Timeout after RCReverbFR2Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT 35 // Timeout waiting for the end of RCReverbFR5Rx signal */ +#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure 36 // Timeout after RCReverbFR6Rx waiting for C_SEGUE */ +#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure 37 // Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */ +#define E_CODE_RCReverbFR8Rx_No_PROFILE 38 // Timeout since no profile was selected */ +#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT 39 // Timeout waiting for the end of RCReverbFR8Rx signal */ +#define E_CODE_RCCRCFR1_DECOD_ERR 40 // Received CRC not equal to computed CRC */ +#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT 41 // Timeout waiting for the end of RCRecovRx signal */ +#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT 42 // Timeout after RSegueFR5Tx waiting for C_SEGUE2 */ +#define E_CODE_RRecovTx_SignalEnd_TIMEOUT 43 // Timeout waiting for the end of RRecovTx signal */ +#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure 44 // Timeout after RCMedleyFRRx waiting for C_SEGUE2 */ +#define E_CODE_CONFIGURATION_PARAMETERS_ERROR 45 // one of the configuration parameters do not meet the standard */ +#define E_CODE_BAD_MEM_ACCESS 46 +#define E_CODE_BAD_INSTRUCTION_ACCESS 47 +#define E_CODE_TX_EOC_FIFO_OVERFLOW 48 +#define E_CODE_RX_EOC_FIFO_OVERFLOW 49 +#define E_CODE_GHS_CD_FLAG_TIME_OUT 50 // Timeout when transmitting Flag in handshake cleardown */ + + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//STAT_OLRStatus: +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define STAT_OLRPM_IDLE 0x0000 +#define STAT_OLRPM_IN_PROGRESS 0x0001 +#define STAT_OLRPM_COMPLETE 0x0002 +#define STAT_OLRPM_ABORTED 0x0003 +#define STAT_OLRPM_RESPONSE 0x0800 + +#define STAT_OLR_BITSWAP 0x0010 +#define STAT_OLR_DRR 0x0020 +#define STAT_OLR_SRA 0x0030 + +//STAT_PMStatus_US: +#define STAT_PM_CO_REQ 0x0004 +#define STAT_PM_SIMPLE_REQ 0x0010 +#define STAT_PM_L2_REQ 0x0020 +#define STAT_PM_L2_TRIM_REQ 0x0030 + +// STAT_OLRError_DS, STAT_OLRError_US +//4 bit response reason code: +#define RESP_BUSY 0x01 +#define RESP_INVALID_PARAMETERS 0x02 +#define RESP_NOT_ENABLED 0x03 +#define RESP_NOT_SUPPORTED 0x04 + +//4 bit internal error code (common for OLR and PM) +#define REQ_INVALID_BiGi 0x10 +#define REQ_INVALID_Lp 0x20 +#define REQ_INVALID_Bpn 0x30 +#define REQ_INVALID_FRAMING_CONSTRAINT 0x40 +#define REQ_NOT_IN_L0_STATE 0x50 +#define REQ_NOT_IN_L2_STATE 0x60 +#define REQ_INVALID_PCB 0x70 +#define REQ_VIOLATES_MARGIN 0x80 + +//STAT_PMError +//4 bit response reason code: +#define RESP_STATE_NOT_DESIRED 0x03 +#define RESP_INFEASIBLE_PARAMETERS 0x04 + + + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN register address and bit field definitions +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_ModeControl 0 +#define OPTN_DMTLnkCtl 1 +// Reserved 2 +#define OPTN_GhsControl 3 +// Reserved 4 +#define OPTN_PwrManControl 5 +#define OPTN_AnnexControl 6 +#define OPTN_ModeControl1 7 +// Reserved 8 +#define OPTN_StateMachineCtrl 9 +// Reserved 10 +// Reserved 11 +#define OPTN_BisLinkControl 12 +#define OPTN_ATMAddrConfig 13 +#define OPTN_ATMNumCellConfig 14 + +// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may /// +// use G.Hs or some other mechanism to negotiate the specific mode of operation. /// +// The OPTN_ModeControl CMV is used to select a set of desired modes /// +// The STAT_ModeControl CMV indicates which mode was actually selected /// + +// OPTN_ModeControl +#define OPTN_ConfigMode_T1413 0x0001 +#define OPTN_ConfigMode_G992_2_AB 0x0002 +#define OPTN_ConfigMode_G992_1_A 0x0004 +#define OPTN_ConfigMode_G992_1_B 0x0008 +#define OPTN_ConfigMode_G992_1_C 0x0010 +#define OPTN_ConfigMode_G992_2_C 0x0020 + +#define OPTN_ConfigMode_G992_3_A 0x0100 +#define OPTN_ConfigMode_G992_3_B 0x0200 +#define OPTN_ConfigMode_G992_3_I 0x0400 +#define OPTN_ConfigMode_G992_3_J 0x0800 +#define OPTN_ConfigMode_G992_3_L 0x1000 + +#define OPTN_ConfigMode_G992_4_A 0x2000 +#define OPTN_ConfigMode_G992_4_I 0x4000 + +#define OPTN_ConfigMode_G992_5 0x8000 + +// OPTN_PwrManControl +#define OPTN_PwrManWakeUpGhs 0x1 +#define OPTN_PwrManWakeUpFR 0x2 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_DMT Link Control +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#define OPTN_DMT_DualLatency_Dis 0x200 +#define OPTN_DMT_S_Dis 0x100 +#define OPTN_DMT_FRAMINGMODE 0x1 +#define OPTN_DMT_FRAMINGMODE_MASK 0x7 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_BIS Link Control +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#define OPTN_BisLinkContrl_LineProbeDis 0x1 +#define OPTN_BisLinkContrl_DSBlackBitsEn 0x2 +#define OPTN_BisLinkContrl_DiagnosticModeEn 0x4 +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_GhsControl +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// +// for OPTN_GhsControl, we will assign 16bit word as follows +// bit 0~3: set the control over which start(initial) message CPE will send: +// +// BIT: 2 1 0 +// 0 0 1 CLR +// 0 1 0 MR +// 0 1 1 MS +// 1 0 0 MP +// +// // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange +// BIT: 5 4 +// 0 1 MS +// 1 0 MR +// 1 1 MP +// +// // bit 15: RT initiated G.hs sample sessions one through eight. Session one is default. +// BIT: 15 +// 1 means session one +// +/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_GHS_ST_GHS 0x8000 +#define OPTN_GHS_INIT_MASK 0x000F +#define OPTN_GHS_RESP_MASK 0x00F0 + +#define OPTN_RTInitTxMsg_CLR 0x0001 +#define OPTN_RTInitTxMsg_MR 0x0002 +#define OPTN_RTInitTxMsg_MS 0x0003 +#define OPTN_RTInitTxMsg_MP 0x0004 + +#define OPTN_RTRespTxMsg_MS 0x0010 +#define OPTN_RTRespTxMsg_MR 0x0020 +#define OPTN_RTRespTxMsg_MP 0x0030 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// OPTN_AnnexControl +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + + +// G.992.3 Annex A/L1/L2 US PSD Mask preferred + +#define OPTN_G992_3_AnnexA_PreferredModeMask 0x3000 +#define OPTN_G992_3_AnnexA_PreferredModeA 0x0000 // default AnnexA PSD mask /// +#define OPTN_G992_3_AnnexA_PreferredModeL1 0x1000 // AnnexL wide spectrum upstream PSD mask /// +#define OPTN_G992_3_AnnexA_PreferredModeL2 0x2000 // AnnexL narrow spectrum upstream PSD mask /// + + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//OPTN_ATMAddrConfig +// Bits 4:0 are Utopia address for BC1 +// Bits 9:5 are Utopia address for BC0 +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_UTPADDR_BC1 0x001F +#define OPTN_UTPADDR_BC0 0x03E0 + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//OPTN_ATMNumCellConfig +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +#define OPTN_BC1_NUM_CELL_PAGES 0x000F // Bits 0:3 /// +#define OPTN_BC0_NUM_CELL_PAGES 0x00F0 // Bits 4:7 /// + + +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// CNFG register address field /// +////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// + +/////////////////////////////////////////// +// these cmvs are used by bis handshake /// +/////////////////////////////////////////// + +// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t) +#define CNFG_TPS_TC_DS0 0 +#define CNFG_TPS_TC_DS1 1 +#define CNFG_TPS_TC_US0 2 +#define CNFG_TPS_TC_US1 3 + +#define CNFG_HDLC_Overhead_Requirements 4 + +// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t) +#define CNFG_PMS_TC_DS0 5 +#define CNFG_PMS_TC_DS1 6 +#define CNFG_PMS_TC_US0 7 +#define CNFG_PMS_TC_US1 8 + +// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t) +#define CNFG_PMD_PARAMETERS 9 + +//////////////////////////////////////////////////////////// +// these cmvs are used by bis training and showtime code /// +//////////////////////////////////////////////////////////// + +//////////////// +// Tx Config /// +//////////////// +#define CNFG_tx_Cnfg_Nbc 10 +#define CNFG_tx_Cnfg_Nlp 11 +#define CNFG_tx_Cnfg_Rp 12 +#define CNFG_tx_Cnfg_Mp 13 +#define CNFG_tx_Cnfg_Lp 14 +#define CNFG_tx_Cnfg_Tp 15 +#define CNFG_tx_Cnfg_Dp 16 +#define CNFG_tx_Cnfg_Bpn 17 +#define CNFG_tx_Cnfg_FramingMode 18 +#define CNFG_tx_Cnfg_MSGLp 19 +#define CNFG_tx_Cnfg_MSGc 20 + + +//////////////// +// Rx Config /// +//////////////// +#define CNFG_rx_Cnfg_Nbc 21 +#define CNFG_rx_Cnfg_Nlp 22 +#define CNFG_rx_Cnfg_Rp 23 +#define CNFG_rx_Cnfg_Mp 24 +#define CNFG_rx_Cnfg_Lp 25 +#define CNFG_rx_Cnfg_Tp 26 +#define CNFG_rx_Cnfg_Dp 27 +#define CNFG_rx_Cnfg_Bpn 28 +#define CNFG_rx_Cnfg_FramingMode 29 +#define CNFG_rx_Cnfg_MSGLp 30 +#define CNFG_rx_Cnfg_MSGc 31 + +#define CNFG_tx_Cnfg_BCnToLPp 32 +#define CNFG_rx_Cnfg_BCnToLPp 33 + + + +#endif + diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h new file mode 100644 index 0000000000..3b73b53892 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_sw.h @@ -0,0 +1,176 @@ +#ifndef AMAZON_SW_H +#define AMAZON_SW_H +#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE +#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1 +#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2 +#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3 +#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4 +#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5 +#define SET_ETH_REG SIOCDEVPRIVATE+6 +#define VLAN_TOOLS SIOCDEVPRIVATE+7 +#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8 + + +/*===mac table commands==*/ +#define RESET_MAC_TABLE 0 +#define READ_MAC_ENTRY 1 +#define WRITE_MAC_ENTRY 2 +#define ADD_MAC_ENTRY 3 + +/*====vlan commands===*/ + +#define CHANGE_VLAN_CTRL 0 +#define READ_VLAN_ENTRY 1 +#define UPDATE_VLAN_ENTRY 2 +#define CLEAR_VLAN_ENTRY 3 +#define RESET_VLAN_TABLE 4 +#define ADD_VLAN_ENTRY 5 + +/* +** MDIO constants. +*/ + +#define MDIO_BASE_STATUS_REG 0x1 +#define MDIO_BASE_CONTROL_REG 0x0 +#define MDIO_PHY_ID_HIGH_REG 0x2 +#define MDIO_PHY_ID_LOW_REG 0x3 +#define MDIO_BC_NEGOTIATE 0x0200 +#define MDIO_BC_FULL_DUPLEX_MASK 0x0100 +#define MDIO_BC_AUTO_NEG_MASK 0x1000 +#define MDIO_BC_SPEED_SELECT_MASK 0x2000 +#define MDIO_STATUS_100_FD 0x4000 +#define MDIO_STATUS_100_HD 0x2000 +#define MDIO_STATUS_10_FD 0x1000 +#define MDIO_STATUS_10_HD 0x0800 +#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800 +#define MDIO_ADVERTISMENT_REG 0x4 +#define MDIO_ADVERT_100_FD 0x100 +#define MDIO_ADVERT_100_HD 0x080 +#define MDIO_ADVERT_10_FD 0x040 +#define MDIO_ADVERT_10_HD 0x020 +#define MDIO_LINK_UP_MASK 0x4 +#define MDIO_START 0x1 +#define MDIO_READ 0x2 +#define MDIO_WRITE 0x1 +#define MDIO_PREAMBLE 0xfffffffful + +#define PHY_RESET 0x8000 +#define AUTO_NEGOTIATION_ENABLE 0X1000 +#define AUTO_NEGOTIATION_COMPLETE 0x20 +#define RESTART_AUTO_NEGOTIATION 0X200 + + +#define PHY0_ADDR 0 +#define PHY1_ADDR 1 +#define P1M 0 + +#define AMAZON_SW_REG32(reg_num) *((volatile u32*)(reg_num)) + +#define OK 0; + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +typedef struct mac_table_entry{ + u64 mac_address:48; + u64 p0:1; + u64 p1:1; + u64 p2:1; + u64 cr:1; + u64 ma_st:3; + u64 res:9; +}_mac_table_entry; + +typedef struct IFX_Switch_VLanTableEntry{ + u32 vlan_id:12; + u32 mp0:1; + u32 mp1:1; + u32 mp2:1; + u32 v:1; + u32 res:16; +}_IFX_Switch_VLanTableEntry; + +typedef struct mac_table_req{ + int cmd; + int index; + u32 data; + u64 entry_value; +}_mac_table_req; + +#else //not CONFIG_CPU_LITTLE_ENDIAN +typedef struct mac_table_entry{ + u64 mac_address:48; + u64 p0:1; + u64 p1:1; + u64 p2:1; + u64 cr:1; + u64 ma_st:3; + u64 res:9; +}_mac_table_entry; + +typedef struct IFX_Switch_VLanTableEntry{ + u32 vlan_id:12; + u32 mp0:1; + u32 mp1:1; + u32 mp2:1; + u32 v:1; + u32 res:16; +}_IFX_Switch_VLanTableEntry; + + +typedef struct mac_table_req{ + int cmd; + int index; + u32 data; + u64 entry_value; +}_mac_table_req; + +#endif //CONFIG_CPU_LITTLE_ENDIAN + + + +typedef struct vlan_req{ + int cmd; + int index; + u32 data; + u32 entry_value; +}_vlan_req; + +typedef struct data_req{ + int index; + u32 value; +}_data_req; + +enum duplex +{ + half, + full, + autoneg +}; + +struct switch_priv { + struct net_device_stats stats; + int rx_packetlen; + u8 *rx_packetdata; + int rx_status; + int tx_packetlen; +#ifdef CONFIG_NET_HW_FLOWCONTROL + int fc_bit; +#endif //CONFIG_NET_HW_FLOWCONTROL + u8 *tx_packetdata; + int tx_status; + struct dma_device_info *dma_device; + struct sk_buff *skb; + spinlock_t lock; + int mdio_phy_addr; + int current_speed; + int current_speed_selection; + int rx_queue_len; + int full_duplex; + enum duplex current_duplex; +}; + +#endif //AMAZON_SW_H + + + + + diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h new file mode 100644 index 0000000000..a64e6f9f80 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_tpe.h @@ -0,0 +1,258 @@ +#ifndef AMAZON_TPE_H +#define AMAZON_TPE_H +#include +#include +#include +#include + +#ifdef CONFIG_IFX_ATM_MIB +/* For ATM-MIB lists */ +#include +#endif +#include + +/* CBM Queue arranagement + * Q0: free cells pool + * Q1~ Q15: upstream queues + * Q16: QAM downstream + * Q17~Q31: downstream queues + */ +#define AMAZON_ATM_MAX_QUEUE_NUM 32 +#define AMAZON_ATM_PORT_NUM 2 +#define AMAZON_ATM_FREE_CELLS 4000 +#define AMAZON_ATM_MAX_VCC_NUM (AMAZON_ATM_MAX_QUEUE_NUM/2 - 1) +#define AMAZON_AAL0_SDU (ATM_AAL0_SDU+4) //one more word for status +#define CBM_RX_OFFSET 16 //offset from the same q for tx +#define AMAZON_ATM_OAM_Q_ID 16 +#define AMAZON_ATM_RM_Q_ID 16 +#define AMAZON_ATM_OTHER_Q_ID 16 +#define CBM_DEFAULT_Q_OFFSET 1 +#define HTUTIMEOUT 0xffff//timeoutofhtutocbm +#define QSB_WFQ_NONUBR_MAX 0x3f00 +#define QSB_WFQ_UBR_BYPASS 0x3fff +#define QSB_TP_TS_MAX 65472 +#define QSB_TAUS_MAX 64512 +#define QSB_GCR_MIN 18 +#define HTU_RAM_ACCESS_MAX 1024//maxium time for HTU RAM access + +#define SWIE_LOCK 1 +#define PROC_ATM 1 +#define PROC_MIB 2 +#define PROC_VCC 3 +#define PROC_AAL5 4 +#define PROC_CBM 5 +#define PROC_HTU 6 +#define PROC_QSB 7 +#define PROC_SWIE 8 + +/***************** internal data structure ********************/ +typedef int (*push_back_t)(struct atm_vcc *vcc,struct sk_buff *skb,int err) ; +/* Device private data */ +typedef struct{ + u8 padding_byte; + u32 tx_max_sdu; + u32 rx_max_sdu; + u32 cnt_cpy; //no. of packets that need a copy due to alignment +}amazon_aal5_dev_t; + +typedef struct{ + u32 max_q_off; //maxium queues used in real scenario + u32 nrt_thr; + u32 clp0_thr; + u32 clp1_thr; + u32 free_cell_cnt; +#ifdef CONFIG_USE_VENUS + u8 * qd_addr_free; //to work around a bug, bit15 of QDOFF address should be 1 +#endif + u8 * qd_addr; + u8 * mem_addr; + u8 allocated; +}amazon_cbm_dev_t; + +typedef struct{ + +}amazon_htu_dev_t; + +typedef struct{ + u32 tau; //cell delay variation due to concurrency(?) + u32 tstepc; //time step, all legal values are 1,2,4 + u32 sbl; //scheduler burse length (for PHY) +}amazon_qsb_dev_t; + +typedef struct{ + u32 qid; //QID of the current extraction queue + struct semaphore in_sem; // Software-Insertion semaphore + volatile long lock; //lock that avoids race contions between SWIN and SWEX + wait_queue_head_t sleep; //wait queue for SWIE and SWEX + u32 sw; //status word +}amazon_swie_dev_t; + +//AAL5 MIB Counter +typedef struct{ + u32 tx,rx; //number AAL5 CPCS PDU from/to higher-layer + u32 tx_err,rx_err; //ifInErrors and ifOutErros + u32 tx_drop,rx_drop; //discarded received packets due to mm shortage + u32 htu_unp; //number of unknown received cells + u32 rx_cnt_h; //number of octets received, high 32 bits + u32 rx_cnt_l; //number of octets received, low 32 bits + u32 tx_cnt_h; //number of octets transmitted, high 32 bits + u32 tx_cnt_l; //number of octets transmitted, low 32 bits + u32 tx_ppd; //number of cells for AAL5 upstream PPD discards + u64 rx_cells; //number of cells for downstream + u64 tx_cells; //number of cells for upstream + u32 rx_err_cells; //number of cells dropped due to uncorrectable HEC errors +}amazon_mib_counter_t; + + + +typedef enum {QS_PKT,QS_LEN,QS_ERR,QS_HW_DROP,QS_SW_DROP,QS_MAX} qs_t; +//queue statics no. of packet received / sent +//queue statics no. of bytes received / sent +//queue statics no. of packets with error +//queue statics no. of packets dropped by hw +//queue statics no. of packets dropped by sw + +typedef struct{ + push_back_t push; //call back function + struct atm_vcc * vcc; //opened vcc + struct timeval access_time; //time when last F4/F5 user cells arrive + int free; //whether this queue is occupied, 0: occupied, 1: free + u32 aal5VccCrcErrors; //MIB counter + u32 aal5VccOverSizedSDUs; //MIB counter + +#if defined(AMAZON_ATM_DEBUG) || defined (CONFIG_IFX_ATM_MIB) + u32 qs[QS_MAX]; +#endif +}amazon_atm_queue_t; + + +typedef struct{ + int enable; //enable / disable + u32 max_conn; //maximum number of connections per port + u32 tx_max_cr; //Remaining cellrate for this device for tx direction + u32 tx_rem_cr; //Remaining cellrate for this device for tx direction + u32 tx_cur_cr; //Current cellrate for this device for tx direction +}amazon_atm_port_t; + +typedef struct{ + amazon_aal5_dev_t aal5; + amazon_cbm_dev_t cbm; + amazon_htu_dev_t htu; + amazon_qsb_dev_t qsb; + amazon_swie_dev_t swie; + amazon_mib_counter_t mib_counter; + amazon_atm_queue_t queues[AMAZON_ATM_MAX_QUEUE_NUM]; + amazon_atm_port_t ports[AMAZON_ATM_PORT_NUM]; + atomic_t dma_tx_free_0;//TX_CH0 has availabe descriptors +} amazon_atm_dev_t; + +struct oam_last_activity{ + u8 vpi; //vpi for this connection + u16 vci; //vci for t his connection + struct timeval stamp; //time when last F4/F5 user cells arrive + struct oam_last_activity * next;//for link list purpose +}; + +typedef union{ +#ifdef CONFIG_CPU_LITTLE_ENDIAN + struct{ + u32 tprs :16; + u32 twfq :14; + u32 vbr :1; + u32 reserved :1; + }bit; + u32 w0; +#else + struct{ + u32 reserved :1; + u32 vbr :1; + u32 twfq :14; + u32 tprs :16; + }bit; + u32 w0; +#endif + +}qsb_qptl_t; + +typedef union{ +#ifdef CONFIG_CPU_LITTLE_ENDIAN + struct{ + u32 ts :16; + u32 taus :16; + }bit; + u32 w0; +#else + struct{ + u32 taus :16; + u32 ts :16; + }bit; + u32 w0; +#endif +}qsb_qvpt_t; + + + +struct amazon_atm_cell_header { +#ifdef CONFIG_CPU_LITTLE_ENDIAN + struct{ + u32 clp :1; // Cell Loss Priority + u32 pti :3; // Payload Type Identifier + u32 vci :16; // Virtual Channel Identifier + u32 vpi :8; // Vitual Path Identifier + u32 gfc :4; // Generic Flow Control + }bit; +#else + struct{ + u32 gfc :4; // Generic Flow Control + u32 vpi :8; // Vitual Path Identifier + u32 vci :16; // Virtual Channel Identifier + u32 pti :3; // Payload Type Identifier + u32 clp :1; // Cell Loss Priority + }bit; +#endif +}; + + +/************************ Function Declarations **************************/ +amazon_atm_dev_t * amazon_atm_create(void); +int amazon_atm_open(struct atm_vcc *vcc,push_back_t); +int amazon_atm_send(struct atm_vcc *vcc,struct sk_buff *skb); +int amazon_atm_send_oam(struct atm_vcc *vcc,void *cell, int flags); +void amazon_atm_close(struct atm_vcc *vcc); +void amazon_atm_cleanup(void); +const struct oam_last_activity* get_oam_time_stamp(void); + +//mib-related +int amazon_atm_cell_mib(atm_cell_ifEntry_t * to,u32 itf); +int amazon_atm_aal5_mib(atm_aal5_ifEntry_t * to); +int amazon_atm_vcc_mib(struct atm_vcc *vcc,atm_aal5_vcc_t * to); +int amazon_atm_vcc_mib_x(int vpi, int vci,atm_aal5_vcc_t* to); + +#define AMAZON_WRITE_REGISTER_L(data,addr) do{ *((volatile u32*)(addr)) = (u32)(data); wmb();} while (0) +#define AMAZON_READ_REGISTER_L(addr) (*((volatile u32*)(addr))) +/******************************* ioctl stuff****************************************/ +#define NUM(dev) (MINOR(dev) & 0xf) +/* + * Ioctl definitions + */ +/* Use 'o' as magic number */ +#define AMAZON_ATM_IOC_MAGIC 'o' +/* MIB_CELL: get atm cell level mib counter + * MIB_AAL5: get aal5 mib counter + * MIB_VCC: get vcc mib counter + */ +typedef struct{ + int vpi; + int vci; + atm_aal5_vcc_t mib_vcc; +}atm_aal5_vcc_x_t; +#define AMAZON_ATM_MIB_CELL _IOWR(AMAZON_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t) +#define AMAZON_ATM_MIB_AAL5 _IOWR(AMAZON_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t) +#define AMAZON_ATM_MIB_VCC _IOWR(AMAZON_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t) +#define AMAZON_ATM_IOC_MAXNR 3 + +//sockopt +#define SO_AMAZON_ATM_MIB_VCC __SO_ENCODE(SOL_ATM,5,atm_aal5_vcc_t) + +#endif // AMAZON_TPE_H + diff --git a/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h b/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h new file mode 100644 index 0000000000..775dabccfb --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/amazon_wdt.h @@ -0,0 +1,23 @@ +#ifndef AMAZON_WDT_H +#define AMAZON_WDT_H +#ifdef __KERNEL__ +typedef struct wdt_dev{ + char name[16]; + int major; + int minor; + + int full; + char buff[10]; +}wdt_dev; +#define AMAZON_WDT_REG32(addr) (*((volatile u32*)(addr))) +#endif //__KERNEL__ + +//AMAZON_WDT_IOC_START: start the WDT timer (must provide a initial timeout value) +//AMAZON_WDT_IOC_STOP: stop the WDT +//AMAZON_WDT_IOC_PING: reload the timer to initial value (must happend after a AMAZON_WDT_IOC_START) +#define AMAZON_WDT_IOC_MAGIC 0xc0 +#define AMAZON_WDT_IOC_START _IOW( AMAZON_WDT_IOC_MAGIC,0, int) +#define AMAZON_WDT_IOC_STOP _IO( AMAZON_WDT_IOC_MAGIC,1) +#define AMAZON_WDT_IOC_PING _IO( AMAZON_WDT_IOC_MAGIC,2) + +#endif //AMAZON_WDT_H diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h new file mode 100644 index 0000000000..8adda20051 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/atm_defines.h @@ -0,0 +1,540 @@ +#ifndef ATM_DEFINES_H +#define ATM_DEFINES_H + +//Registers Base Address +#define IO_BASE_ADDR 0xA0000000 +#define AAL5_BASE_ADDRESS 0x10104400+IO_BASE_ADDR +#define CBM_BASE_ADDRESS 0x10104000+IO_BASE_ADDR +#define HTU_BASE_ADDRESS 0x10105100+IO_BASE_ADDR +#define QSB_BASE_ADDRESS 0x10105000+IO_BASE_ADDR +#define SWIE_BASE_ADDRESS 0x10105200+IO_BASE_ADDR + +//AAL5 Registers +#define AAL5_SISR0_ADDR AAL5_BASE_ADDRESS+0x20 +#define AAL5_SIMR0_ADDR AAL5_BASE_ADDRESS+0x24 +#define AAL5_SISR1_ADDR AAL5_BASE_ADDRESS+0x28 +#define AAL5_SIMR1_ADDR AAL5_BASE_ADDRESS+0x2C +#define AAL5_SMFL_ADDR AAL5_BASE_ADDRESS+0x30 +#define AAL5_SATMHD_ADDR AAL5_BASE_ADDRESS+0x34 +#define AAL5_SCON_ADDR AAL5_BASE_ADDRESS+0x38 +#define AAL5_SCMD_ADDR AAL5_BASE_ADDRESS+0x3C +#define AAL5_RISR0_ADDR AAL5_BASE_ADDRESS+0x40 +#define AAL5_RIMR0_ADDR AAL5_BASE_ADDRESS+0x44 +#define AAL5_RISR1_ADDR AAL5_BASE_ADDRESS+0x48 +#define AAL5_RIMR1_ADDR AAL5_BASE_ADDRESS+0x4C +#define AAL5_RMFL_ADDR AAL5_BASE_ADDRESS+0x50 +#define AAL5_RINTINF0_ADDR AAL5_BASE_ADDRESS+0x54 +#define AAL5_RINTINF1_ADDR AAL5_BASE_ADDRESS+0x58 +#define AAL5_RES5C_ADDR AAL5_BASE_ADDRESS+0x5C +#define AAL5_RIOL_ADDR AAL5_BASE_ADDRESS+0x60 +#define AAL5_RIOM_ADDR AAL5_BASE_ADDRESS+0x64 +#define AAL5_SOOL_ADDR AAL5_BASE_ADDRESS+0x68 +#define AAL5_SOOM_ADDR AAL5_BASE_ADDRESS+0x6C +#define AAL5_RES70_ADDR AAL5_BASE_ADDRESS+0x70 +#define AAL5_RES74_ADDR AAL5_BASE_ADDRESS+0x74 +#define AAL5_RES78_ADDR AAL5_BASE_ADDRESS+0x78 +#define AAL5_RES7C_ADDR AAL5_BASE_ADDRESS+0x7C +#define AAL5_RES80_ADDR AAL5_BASE_ADDRESS+0x80 +#define AAL5_RES84_ADDR AAL5_BASE_ADDRESS+0x84 +#define AAL5_RES88_ADDR AAL5_BASE_ADDRESS+0x88 +#define AAL5_RES8C_ADDR AAL5_BASE_ADDRESS+0x8C +#define AAL5_RES90_ADDR AAL5_BASE_ADDRESS+0x90 +#define AAL5_RES94_ADDR AAL5_BASE_ADDRESS+0x94 +#define AAL5_RES98_ADDR AAL5_BASE_ADDRESS+0x98 +#define AAL5_RES9C_ADDR AAL5_BASE_ADDRESS+0x9C +#define AAL5_RESA0_ADDR AAL5_BASE_ADDRESS+0xA0 +#define AAL5_RESA4_ADDR AAL5_BASE_ADDRESS+0xA4 +#define AAL5_RESA8_ADDR AAL5_BASE_ADDRESS+0xA8 +#define AAL5_RESAC_ADDR AAL5_BASE_ADDRESS+0xAC +#define AAL5_RESB0_ADDR AAL5_BASE_ADDRESS+0xB0 +#define AAL5_RESB4_ADDR AAL5_BASE_ADDRESS+0xB4 +#define AAL5_RESB8_ADDR AAL5_BASE_ADDRESS+0xB8 +#define AAL5_RESBC_ADDR AAL5_BASE_ADDRESS+0xBC +#define AAL5_RESC0_ADDR AAL5_BASE_ADDRESS+0xC0 +#define AAL5_RESC4_ADDR AAL5_BASE_ADDRESS+0xC4 +#define AAL5_RESC8_ADDR AAL5_BASE_ADDRESS+0xC8 +#define AAL5_RESCC_ADDR AAL5_BASE_ADDRESS+0xCC +#define AAL5_RESD0_ADDR AAL5_BASE_ADDRESS+0xD0 +#define AAL5_RESD4_ADDR AAL5_BASE_ADDRESS+0xD4 +#define AAL5_RESD8_ADDR AAL5_BASE_ADDRESS+0xD8 +#define AAL5_RESDC_ADDR AAL5_BASE_ADDRESS+0xDC +#define AAL5_RESE0_ADDR AAL5_BASE_ADDRESS+0xE0 +#define AAL5_RESE4_ADDR AAL5_BASE_ADDRESS+0xE4 +#define AAL5_RESE8_ADDR AAL5_BASE_ADDRESS+0xE8 +#define AAL5_RESEC_ADDR AAL5_BASE_ADDRESS+0xEC +#define AAL5_SSRC0_ADDR AAL5_BASE_ADDRESS+0xF0 +#define AAL5_SSRC1_ADDR AAL5_BASE_ADDRESS+0xF4 +#define AAL5_RSRC0_ADDR AAL5_BASE_ADDRESS+0xF8 +#define AAL5_RSRC1_ADDR AAL5_BASE_ADDRESS+0xFC + +#define AAL5S_ISR_QID_MASK 0xFF000000 +#define AAL5S_ISR_SAB 0x00000100 +#define AAL5S_ISR_SE 0x00000080 +#define AAL5S_ISR_MFLE 0x00000040 +#define AAL5S_ISR_SBE0 0x00000020 +#define AAL5S_ISR_SEG0 0x00000010 +#define AAL5S_ISR_TAB 0x00000004 + +#define AAL5_SIMR_MASK 0x000001c7 +#define AAL5_SIMR_SAB 0x00000100 +#define AAL5_SIMR_SE 0x00000080 +#define AAL5_SIMR_MFLE 0x00000040 +#define AAL5_SIMR_TAB 0x00000004 +#define AAL5_SIMR_SBE0 0x00000002 +#define AAL5_SIMR_SEG0 0x00000001 + +#define AAL5_SCMD_SEQCOUNT_MASK 0x0000ff00 +#define AAL5_SCMD_MODE_POLL 0x00000008 +#define AAL5_SCMD_MODE_COUNT 0x00000000 +#define AAL5_SCMD_AS 0x00000004 +#define AAL5_SCMD_SS 0x00000002 +#define AAL5_SCMD_AR 0x00000001 + +#define AAL5R_ISR_CID_MASK 0xFF000000//ConnectionID +#define AAL5R_ISR_DBC_MASK 0x00FF0000//DiscardedByteCounter +#define AAL5R_ISR_END 0x00002000//End +#define AAL5R_ISR_ICID 0x00001000//InvalidConnectionID +#define AAL5R_ISR_CLP 0x00000800//CellLossPriority +#define AAL5R_ISR_CGST 0x00000400//Congestion +#define AAL5R_ISR_UUE 0x00000200//CPCSUUError +#define AAL5R_ISR_CPIE 0x00000100//CPIError +#define AAL5R_ISR_FE 0x00000080//FrameEnd +#define AAL5R_ISR_MFLE 0x00000040//MaximumFrameLengthExceeded +#define AAL5R_ISR_DBCE 0x00000020//DiscardedByteCounterExceeded +#define AAL5R_ISR_CRC 0x00000010//CRCError +#define AAL5R_ISR_ILEN 0x00000008//InvalidLength +#define AAL5R_ISR_RAB 0x00000004//ReceiveAbort + +#define AAL5_RIMR1_MASK 0x00003ffc +#define AAL5_RIMR1_END 0x00002000//End +#define AAL5_RIMR1_ICID 0x00001000//InvalidConnectionID +#define AAL5_RIMR1_CLP 0x00000800//CellLossPriority +#define AAL5_RIMR1_CGST 0x00000400//Congestion +#define AAL5_RIMR1_UUE 0x00000200//CPCSUUError +#define AAL5_RIMR1_CPIE 0x00000100//CPIError +#define AAL5_RIMR1_FE 0x00000080//FrameEnd +#define AAL5_RIMR1_MFLE 0x00000040//MaximumFrameLengthExceeded +#define AAL5_RIMR1_DBCE 0x00000020//DiscardedByteCounterExceeded +#define AAL5_RIMR1_CRC 0x00000010//CRCError +#define AAL5_RIMR1_ILEN 0x00000008//InvalidLength +#define AAL5_RIMR1_RAB 0x00000004//ReceiveAbort + +//AAL5 Reassambly Errors +#define AAL5_STW1_MASK 0x33//Error mask +#define AAL5_STW0_MASK 0x5c//Error mask +#define AAL5_STW0_BE 0x3//padding bytes mask +#define AAL5_STW1_CBM 0x20//Transfer from CBM to A5R abnormally ended +#define AAL5_STW1_CH 0x10//Invalid Channel number error +#define AAL5_STW1_CLP 0x8//CLP value of cells in packet is 1 +#define AAL5_STW1_CG 0x4//Cell in packet expired congestion +#define AAL5_STW1_UU 0x2//CPCS-UU value error +#define AAL5_STW1_CPI 0x1//CPI value error +#define AAL5_STW0_FE 0x80//Frame end +#define AAL5_STW0_MFL 0x40//Maximum frame length error +#define AAL5_STW0_CRC 0x10//CRC error +#define AAL5_STW0_IL 0x8//Invalid length +#define AAL5_STW0_RA 0x4//Received abort + + + +//CBM Registers +#define CBM_NRTTHR_ADDR CBM_BASE_ADDRESS+0x10//NonRealTimeThreshold +#define CBM_CLP0THR_ADDR CBM_BASE_ADDRESS+0x14//CLP0Threshold +#define CBM_CLP1THR_ADDR CBM_BASE_ADDRESS+0x18//CLP1Threshold +#define CBM_QDOFF_ADDR CBM_BASE_ADDRESS+0x1C//QueueDescriptorOffset +#define CBM_CFG_ADDR CBM_BASE_ADDRESS+0x20//Configuration +#define CBM_HWEXPAR0_ADDR CBM_BASE_ADDRESS+0x24//HWExtractParameter0 +#define CBM_RES28_ADDR CBM_BASE_ADDRESS+0x28 +#define CBM_WMSTAT0_ADDR CBM_BASE_ADDRESS+0x2C +#define CBM_HWEXCMD_ADDR CBM_BASE_ADDRESS+0x30//HWExtractCommand0 +#define CBM_RES34_ADDR CBM_BASE_ADDRESS+0x34 +#define CBM_HWEXSTAT0_ADDR CBM_BASE_ADDRESS+0x38//HWExtractStatus0 +#define CBM_RES3C_ADDR CBM_BASE_ADDRESS+0x3C +#define CBM_RES40_ADDR CBM_BASE_ADDRESS+0x40 +#define CBM_CNT_ADDR CBM_BASE_ADDRESS+0x44//CellCount +#define CBM_RES48_ADDR CBM_BASE_ADDRESS+0x48 +#define CBM_LFR_ADDR CBM_BASE_ADDRESS+0x4C//PointertolastCellinfreeCellQueue +#define CBM_FFR_ADDR CBM_BASE_ADDRESS+0x50//PointertofirstCellinfreeCellQueue +#define CBM_RES54_ADDR CBM_BASE_ADDRESS+0x54 +#define CBM_RES58_ADDR CBM_BASE_ADDRESS+0x58 +#define CBM_RES5C_ADDR CBM_BASE_ADDRESS+0x5C +#define CBM_RES60_ADDR CBM_BASE_ADDRESS+0x60 +#define CBM_RES64_ADDR CBM_BASE_ADDRESS+0x64 +#define CBM_RES68_ADDR CBM_BASE_ADDRESS+0x68 +#define CBM_RES6C_ADDR CBM_BASE_ADDRESS+0x6C +#define CBM_RES70_ADDR CBM_BASE_ADDRESS+0x70 +#define CBM_RES74_ADDR CBM_BASE_ADDRESS+0x74 +#define CBM_RES78_ADDR CBM_BASE_ADDRESS+0x78 +#define CBM_RES7C_ADDR CBM_BASE_ADDRESS+0x7C +#define CBM_RES80_ADDR CBM_BASE_ADDRESS+0x80 +#define CBM_RES84_ADDR CBM_BASE_ADDRESS+0x84 +#define CBM_RES88_ADDR CBM_BASE_ADDRESS+0x88 +#define CBM_RES8C_ADDR CBM_BASE_ADDRESS+0x8C +#define CBM_RES90_ADDR CBM_BASE_ADDRESS+0x90 +#define CBM_RES94_ADDR CBM_BASE_ADDRESS+0x94 +#define CBM_RES98_ADDR CBM_BASE_ADDRESS+0x98 +#define CBM_RES9C_ADDR CBM_BASE_ADDRESS+0x9C +#define CBM_RESA0_ADDR CBM_BASE_ADDRESS+0xA0 +#define CBM_RESA4_ADDR CBM_BASE_ADDRESS+0xA4 +#define CBM_RESA8_ADDR CBM_BASE_ADDRESS+0xA8 +#define CBM_RESAC_ADDR CBM_BASE_ADDRESS+0xAC +#define CBM_RESB0_ADDR CBM_BASE_ADDRESS+0xB0 +#define CBM_RESB4_ADDR CBM_BASE_ADDRESS+0xB4 +#define CBM_RESB8_ADDR CBM_BASE_ADDRESS+0xB8 +#define CBM_RESBC_ADDR CBM_BASE_ADDRESS+0xBC +#define CBM_INTINF0_ADDR CBM_BASE_ADDRESS+0xC0//InterruptInfo0 +#define CBM_INTCMD_ADDR CBM_BASE_ADDRESS+0xC4//InterruptCommand0 +#define CBM_IMR0_ADDR CBM_BASE_ADDRESS+0xC8//InterruptMask +#define CBM_SRC0_ADDR CBM_BASE_ADDRESS+0xCC//ServiceRequestControl +#define CBM_RESD0_ADDR CBM_BASE_ADDRESS+0xD0 +#define CBM_RESD4_ADDR CBM_BASE_ADDRESS+0xD4 +#define CBM_RESD8_ADDR CBM_BASE_ADDRESS+0xD8 +#define CBM_RESDC_ADDR CBM_BASE_ADDRESS+0xDC +#define CBM_RESE0_ADDR CBM_BASE_ADDRESS+0xE0 +#define CBM_AAL5IDIS_ADDR CBM_BASE_ADDRESS+0xE4//MIB-No.EPDdiscardedpacketsupstream +#define CBM_AAL5ODIS_ADDR CBM_BASE_ADDRESS+0xE8//MIB-No.PPDdiscardedpacketsupstream +#define CBM_RESEC_ADDR CBM_BASE_ADDRESS+0xEC +#define CBM_RESF0_ADDR CBM_BASE_ADDRESS+0xF0 +#define CBM_RESF4_ADDR CBM_BASE_ADDRESS+0xF4 +#define CBM_RESF8_ADDR CBM_BASE_ADDRESS+0xF8 +#define CBM_RESFC_ADDR CBM_BASE_ADDRESS+0xFC + +//CBMCFG +#define CBM_CFG_INTLCK0EN 0x00000008 +#define CBM_CFG_INT0HLT 0x00000004 +#define CBM_CFG_START 0x00000001 + +#define CBM_HWEXPAR_PN_A5 0x00002000 +#define CBM_HWEXPAR_PN_CM 0x00000000 +#define CBM_HWEXPAR_SUBADD_PORTMASK 0x00000070 +#define CBM_HWEXPAR_SUBADD_ADU 0x00000000 +#define CBM_HWEXPAR_SUBADD_AAL2 0x00000080 +#define CBM_HWEXPAR_SUBADD_SWIE 0x00000100 + +#define CBM_HWEXCMD_SFE2 0x00000100 +#define CBM_HWEXCMD_FE2 0x00000080 +#define CBM_HWEXCMD_SCE2 0x00000040 +#define CBM_HWEXCMD_SFE1 0x00000020 +#define CBM_HWEXCMD_FE1 0x00000010 +#define CBM_HWEXCMD_SCE1 0x00000008 +#define CBM_HWEXCMD_SFE0 0x00000004 +#define CBM_HWEXCMD_FE0 0x00000002 +#define CBM_HWEXCMD_SCE0 0x00000001 + +#define CBM_INTINF0_QID_MASK 0xFF000000 +#define CBM_INTINF0_ORIGIN_MASK 0x00F00000 +#define CBM_INTINF0_EF 0x00004000 +#define CBM_INTINF0_ACA 0x00002000 +#define CBM_INTINF0_ERR 0x00001000 +#define CBM_INTINF0_DISC 0x00000800 +#define CBM_INTINF0_QSBV 0x00000400 +#define CBM_INTINF0_Q0E 0x00000200 +#define CBM_INTINF0_Q0I 0x00000100 +#define CBM_INTINF0_RDE 0x00000080 +#define CBM_INTINF0_OPF 0x00000040 +#define CBM_INTINF0_NFCA 0x00000020 +#define CBM_INTINF0_CLP1TR 0x00000010 +#define CBM_INTINF0_CLP0TR 0x00000008 +#define CBM_INTINF0_NRTTR 0x00000004 +#define CBM_INTINF0_QFD 0x00000002 +#define CBM_INTINF0_QTR 0x00000001 +#define CBM_INTINF0_QID_SHIFT 24 +//CBM QD Word 3 +#define CBM_QD_W3_QOS_0 0x00000000 +#define CBM_QD_W3_QOS_1 0x40000000 +#define CBM_QD_W3_QOS_2 0x80000000 +#define CBM_QD_W3_QOS_3 0xc0000000 + +#define CBM_QD_W3_DIR_UP 0x20000000 +#define CBM_QD_W3_DIR_DOWN 0x00000000 + +#define CBM_QD_W3_CLPt 0x10000000 +#define CBM_QD_W3_RT 0x08000000 +#define CBM_QD_W3_AAL5 0x04000000 + +#define CBM_QD_W3_INT_NOINT 0x00000000 +#define CBM_QD_W3_INT_ACA 0x01000000 +#define CBM_QD_W3_INT_EOF 0x02000000 +#define CBM_QD_W3_INT_BOTH 0x03000000 + +#define CBM_QD_W3_THRESHOLD_MASK 0x00ff0000 +#define CBM_QD_W3_WM_EN 0x00000010 +#define CBM_QD_W3_HCR 0x00000008 +#define CBM_QD_W3_SBID_MASK 0x00000001 + +#define CBM_QD_W3_THRESHOLD_SHIFT 16 + +//WATER MARK STATUS +#define CBM_WM_NRT_MASK 0x00040000 +#define CBM_WM_CLP0_MASK 0x00020000 +#define CBM_WM_CLP1_MASK 0x00010000 + +//CBMNRTTHR, CBMCLP0THR, CBMCLP0THR +#define CBM_NRT_WM_NONE 0x00000000//no water mark +#define CBM_WM_3_1 0x00010000//3/4 to set, 1/4 to release +#define CBM_WM_3_2 0x00020000//3/4 to set, 2/4 to release +#define CBM_WM_2_1 0x00030000//2/4 to set, 1/4 to release +#define CBM_THR_MASK 0x0000FFFF + +#define CBM_IMR_MASK 0x0000fbff +#define CBM_IMR_reserved 0xFFFF0400 +#define CBM_IMR_RFULL 0x00008000//EndofFrame +#define CBM_IMR_EF 0x00004000//EndofFrame +#define CBM_IMR_ACA 0x00002000//AnyCellArrived +#define CBM_IMR_ERR 0x00001000//FPI Error +#define CBM_IMR_DISC 0x00000800//Discard +#define CBM_IMR_reserved1 0x00000400//reserved +#define CBM_IMR_Q0E 0x00000200//Queue0Extract +#define CBM_IMR_Q0I 0x00000100//Queue0Insert +#define CBM_IMR_RDE 0x00000080//ReadEmptyQueue +#define CBM_IMR_OPF 0x00000040//OncePerFrame +#define CBM_IMR_NFCA 0x00000020//NoFreeCellAvailable +#define CBM_IMR_CLP1TR 0x00000010//CLP1ThresholdReached +#define CBM_IMR_CLP0TR 0x00000008//CLP0ThresholdReached +#define CBM_IMR_NRTTR 0x00000004//NonRealTimeThresholdReached +#define CBM_IMR_QFD 0x00000002//QueueFrameDiscard +#define CBM_IMR_QTR 0x00000001//QueueThresholdReached + +#define CBM_EXSTAT_FB 0x00000010 +#define CBM_EXSTAT_SCB 0x00000008 +#define CBM_EXSTAT_Q0 0x00000004 +#define CBM_EXSTAT_RDE 0x00000002 +#define CBM_EXSTAT_QV 0x00000001 + +//HTU Registers +#define HTU_RX0_ADDR HTU_BASE_ADDRESS+0x10 +#define HTU_RX1_ADDR HTU_BASE_ADDRESS+0x14 +#define HTU_RES18_ADDR HTU_BASE_ADDRESS+0x18 +#define HTU_RES1C_ADDR HTU_BASE_ADDRESS+0x1C +#define HTU_RES20_ADDR HTU_BASE_ADDRESS+0x20 +#define HTU_RES24_ADDR HTU_BASE_ADDRESS+0x24 +#define HTU_RES28_ADDR HTU_BASE_ADDRESS+0x28 +#define HTU_RES2C_ADDR HTU_BASE_ADDRESS+0x2C +#define HTU_PCF0PAT_ADDR HTU_BASE_ADDRESS+0x30 +#define HTU_PCF1PAT_ADDR HTU_BASE_ADDRESS+0x34 +#define HTU_RES38_ADDR HTU_BASE_ADDRESS+0x38 +#define HTU_RES3C_ADDR HTU_BASE_ADDRESS+0x3C +#define HTU_RES40_ADDR HTU_BASE_ADDRESS+0x40 +#define HTU_RES44_ADDR HTU_BASE_ADDRESS+0x44 +#define HTU_RES48_ADDR HTU_BASE_ADDRESS+0x48 +#define HTU_RES4C_ADDR HTU_BASE_ADDRESS+0x4C +#define HTU_PCF0MASK_ADDR HTU_BASE_ADDRESS+0x50 +#define HTU_PCF1MASK_ADDR HTU_BASE_ADDRESS+0x54 +#define HTU_RES58_ADDR HTU_BASE_ADDRESS+0x58 +#define HTU_RES5C_ADDR HTU_BASE_ADDRESS+0x5C +#define HTU_RES60_ADDR HTU_BASE_ADDRESS+0x60 +#define HTU_RES64_ADDR HTU_BASE_ADDRESS+0x64 +#define HTU_RES68_ADDR HTU_BASE_ADDRESS+0x68 +#define HTU_RES6C_ADDR HTU_BASE_ADDRESS+0x6C +#define HTU_TIMEOUT_ADDR HTU_BASE_ADDRESS+0x70 +#define HTU_DESTOAM_ADDR HTU_BASE_ADDRESS+0x74 +#define HTU_DESTRM_ADDR HTU_BASE_ADDRESS+0x78 +#define HTU_DESTOTHER_ADDR HTU_BASE_ADDRESS+0x7C +#define HTU_CFG_ADDR HTU_BASE_ADDRESS+0x80 +#define HTU_RES84_ADDR HTU_BASE_ADDRESS+0x84 +#define HTU_RES88_ADDR HTU_BASE_ADDRESS+0x88 +#define HTU_RES8C_ADDR HTU_BASE_ADDRESS+0x8C +#define HTU_INFNOENTRY_ADDR HTU_BASE_ADDRESS+0x90 +#define HTU_INFTIMEOUT_ADDR HTU_BASE_ADDRESS+0x94 +#define HTU_RES98_STAT HTU_BASE_ADDRESS+0x98 +#define HTU_RES9C_ADDR HTU_BASE_ADDRESS+0x9C +#define HTU_MIBCIUP HTU_BASE_ADDRESS+0xA0//MIB Counter In Unknown Protoc Register +#define HTU_CNTTIMEOUT_ADDR HTU_BASE_ADDRESS+0xA4 +#define HTU_RESA8_ADDR HTU_BASE_ADDRESS+0xA8 +#define HTU_RESAC_ADDR HTU_BASE_ADDRESS+0xAC +#define HTU_RAMADDR_ADDR HTU_BASE_ADDRESS+0xB0 +#define HTU_RAMCMD_ADDR HTU_BASE_ADDRESS+0xB4 +#define HTU_RAMSTAT_ADDR HTU_BASE_ADDRESS+0xB8 +#define HTU_RESBC_ADDR HTU_BASE_ADDRESS+0xBC +#define HTU_RAMDAT1_ADDR HTU_BASE_ADDRESS+0xC0 +#define HTU_RAMDAT2_ADDR HTU_BASE_ADDRESS+0xC4 +#define HTU_RESCC_ADDR HTU_BASE_ADDRESS+0xCC +#define HTU_RESD0_ADDR HTU_BASE_ADDRESS+0xD0 +#define HTU_RESD4_ADDR HTU_BASE_ADDRESS+0xD4 +#define HTU_RESD8_ADDR HTU_BASE_ADDRESS+0xD8 +#define HTU_RESDC_ADDR HTU_BASE_ADDRESS+0xDC +#define HTU_RESE0_ADDR HTU_BASE_ADDRESS+0xE0 +#define HTU_RESE4_ADDR HTU_BASE_ADDRESS+0xE4 +#define HTU_IMR0_ADDR HTU_BASE_ADDRESS+0xE8 +#define HTU_RESEC_ADDR HTU_BASE_ADDRESS+0xEC +#define HTU_ISR0_ADDR HTU_BASE_ADDRESS+0xF0 +#define HTU_RESF4_ADDR HTU_BASE_ADDRESS+0xF4 +#define HTU_SRC0_ADDR HTU_BASE_ADDRESS+0xF8 +#define HTU_RESFC_ADDR HTU_BASE_ADDRESS+0xFC + +//HTU_CFG +#define HTU_CFG_START 0x00000001 + +#define HTU_RAMCMD_RMW 0x00000004 +#define HTU_RAMCMD_RD 0x00000002 +#define HTU_RAMCMD_WR 0x00000001 + +#define HTU_RAMDAT1_VCON 0x00000080//validconnection +#define HTU_RAMDAT1_VCT 0x00000040//vcivalueistransparent +#define HTU_RAMDAT1_QIDS 0x00000020//qid selects a cell in cbm +#define HTU_RAMDAT1_VCI3 0x00000010//vci3->oamqueue +#define HTU_RAMDAT1_VCI4 0x00000008//vci4->oamqueue +#define HTU_RAMDAT1_VCI6 0x00000004//vci6->rmqueue +#define HTU_RAMDAT1_PTI4 0x00000002//pti4->oamqueue +#define HTU_RAMDAT1_PTI5 0x00000001//pti5->oamqueue + +#define HTU_RAMDAT2_PTI6 0x00000800 +#define HTU_RAMDAT2_PTI7 0x00000400 +#define HTU_RAMDAT2_F4U 0x00000200 +#define HTU_RAMDAT2_F5U 0x00000100 +#define HTU_RAMDAT2_QID_MASK 0x000000ff + +#define HTU_ISR_NE 0x00000001 +#define HTU_ISR_TORD 0x00000002 +#define HTU_ISR_IT 0x00000008 +#define HTU_ISR_OTOC 0x00000010 +#define HTU_ISR_ONEC 0x00000020 +#define HTU_ISR_PNE 0x00000040 +#define HTU_ISR_PT 0x00000080 +#define HTU_ISR_MASK 0x000000ff + + +//QSB Registers +#define QSB_BIP0_ADDR QSB_BASE_ADDRESS+0x00 +#define QSB_BIP1_ADDR QSB_BASE_ADDRESS+0x04 +#define QSB_BIP2_ADDR QSB_BASE_ADDRESS+0x08 +#define QSB_BIP3_ADDR QSB_BASE_ADDRESS+0x0C +#define QSB_RSVP_ADDR QSB_BASE_ADDRESS+0x10 +#define QSB_TNOW_ADDR QSB_BASE_ADDRESS+0x14 +#define QSB_TNOWCYC_ADDR QSB_BASE_ADDRESS+0x18 +#define QSB_TAU_ADDR QSB_BASE_ADDRESS+0x1C +#define QSB_L1BRS_ADDR QSB_BASE_ADDRESS+0x20 +#define QSB_SBL_ADDR QSB_BASE_ADDRESS+0x24 +#define QSB_CONFIG_ADDR QSB_BASE_ADDRESS+0x28 +#define QSB_RTM_ADDR QSB_BASE_ADDRESS+0x2C +#define QSB_RTD_ADDR QSB_BASE_ADDRESS+0x30 +#define QSB_RAMAC_ADDR QSB_BASE_ADDRESS+0x34 +#define QSB_ISR_ADDR QSB_BASE_ADDRESS+0x38 +#define QSB_IMR_ADDR QSB_BASE_ADDRESS+0x3C +#define QSB_SRC_ADDR QSB_BASE_ADDRESS+0x40 + +#define QSB_TABLESEL_QVPT 8 +#define QSB_TABLESEL_QPT 1 +#define QSB_TABLESEL_SCT 2 +#define QSB_TABLESEL_SPT 3 +#define QSB_TABLESEL_CALENDARWFQ 4/*notusedbyFW*/ +#define QSB_TABLESEL_L2WFQ 5/*notusedbyFW*/ +#define QSB_TABLESEL_CALENDARRS 6/*notusedbyFW*/ +#define QSB_TABLESEL_L2BITMAPRS 7/*notusedbyFW*/ +#define QSB_TABLESEL_SHIFT 24 +#define QSB_TWFQ_MASK 0x3FFF0000 +#define QSB_TPRS_MASK 0x0000FFFF +#define QSB_SBID_MASK 0xF +#define QSB_TWFQ_SHIFT 16 +#define QSB_SCDRATE_MASK 0x00007FFF +#define QSB_SBVALID_MASK 0x80000000 + +#define QSB_ISR_WFQLE 0x00000001 +#define QSB_ISR_WFQBE 0x00000002 +#define QSB_ISR_RSLE 0x00000004 +#define QSB_ISR_RSBE 0x00000008 +#define QSB_ISR_MUXOV 0x00000010 +#define QSB_ISR_CDVOV 0x00000020 +#define QSB_ISR_PARAMI 0x00000040 +#define QSB_ISR_SLOSS 0x00000080 +#define QSB_ISR_IIPS 0x00000100 + +#define QSB_IMR_WFQLE 0x00000001 +#define QSB_IMR_WFQBE 0x00000002 +#define QSB_IMR_RSLE 0x00000004 +#define QSB_IMR_RSBE 0x00000008 +#define QSB_IMR_MUXOV 0x00000010 +#define QSB_IMR_CDVOV 0x00000020 +#define QSB_IMR_PARAMI 0x00000040 +#define QSB_IMR_SLOSS 0x00000080 +#define QSB_IMR_IIPS 0x00000100 + +#define QSB_READ 0x0 +#define QSB_WRITE 0x80000000 +#define QSB_READ_ALL 0xFFFFFFFF + +#if 1 //some bug with QSB access mask +#define QSB_QPT_SET_MASK 0x0 +#define QSB_QVPT_SET_MASK 0x0 +#define QSB_SET_SCT_MASK 0x0 +#define QSB_SET_SPT_MASK 0x0 +#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF +#else //some bug with QSB access mask +#define QSB_QPT_SET_MASK 0x80000000 +#define QSB_QVPT_SET_MASK 0x0 +#define QSB_SET_SCT_MASK 0xFFFFFFE0 +#define QSB_SET_SPT_MASK 0x7FF8C000 +#define QSB_SET_SPT_SBVALID_MASK 0x7FFFFFFF +#endif //some bug with QSB access mask + +#define QSB_SPT_SBVALID 0x80000000 + +#define QSB_RAMAC_REG_LOW 0x0 +#define QSB_RAMAC_REG_HIGH 0x00010000 + +#define SRC_SRE_ENABLE 0x1000 +#define SRC_CLRR 0x4000 //request clear bit + + + +//SWIE Registers +#define SWIE_IQID_ADDR SWIE_BASE_ADDRESS+0x0c//SWIEInsertQueueDescriptor +#define SWIE_ICMD_ADDR SWIE_BASE_ADDRESS+0x10//SWIEInsertCommand +#define SWIE_ISTAT_ADDR SWIE_BASE_ADDRESS+0x14//SWIEInsertStatus +#define SWIE_ESTAT_ADDR SWIE_BASE_ADDRESS+0x18//SWIEExtractStatus +#define SWIE_ISRC_ADDR SWIE_BASE_ADDRESS+0x74//SWIEInsertServiceRequestControl +#define SWIE_ESRC_ADDR SWIE_BASE_ADDRESS+0x78//SWIEExtractServiceRequestControl +#define SWIE_ICELL_ADDR SWIE_BASE_ADDRESS+0x80//SWIEInsertCell(0x80-0xb4) +#define SWIE_ECELL_ADDR SWIE_BASE_ADDRESS+0xc0//SWIEExtractCell(0xc0-0xf4) + +#define SWIE_ISTAT_DONE 0x1 +#define SWIE_ESTAT_DONE 0x1 +#define SWIE_ICMD_START 0x00000001//Startcommandforinsertion +#define SWIE_CBM_SCE0 CBM_HWEXCMD_SCE0//CBMcommandforSingle-Cell-Extract +#define SWIE_CBM_PID_SUBADDR 0x00001000//CBMPortIDandSubAddressforUTOPIA + +//Extracted cell format +//52bytes AAL0 PDU + "Input cell additional data"(14bits) +#define SWIE_ADDITION_DATA_MASK 0x7fff +#define SWIE_EPORT_MASK 0x7000//Source ID (000 AUB0, 001 AUB1) +#define SWIE_EF4USER_MASK 0x800 +#define SWIE_EF5USER_MASK 0x400 +#define SWIE_EOAM_MASK 0x200 +#define SWIE_EAUU_MASK 0x100 +#define SWIE_EVCI3_MASK 0x80 +#define SWIE_EVCI4_MASK 0x40 +#define SWIE_EVCI6_MASK 0x20 +#define SWIE_EPTI4_MASK 0x10 +#define SWIE_EPTI5_MASK 0x8 +#define SWIE_EPTI6_MASK 0x4 +#define SWIE_EPTI7_MASK 0x2 +#define SWIE_ECRC10ERROR_MASK 0x1 + +#define CBM_CELL_SIZE 0x40 +#define CBM_QD_SIZE 0x10 +#define AAL5R_TRAILER_LEN 12 +#define AAL5S_INBOUND_HEADER 8 + +//constants +//TODO: to be finalized by system guys +//DMA QOS defined by ATM QoS Service type +#define DMA_RX_CH0 0 +#define DMA_RX_CH1 1 +#define DMA_TX_CH0 0 +#define DMA_TX_CH1 1 +#define CBR_DMA_QOS CBM_QD_W3_QOS_0 +#define VBR_RT_DMA_QOS CBM_QD_W3_QOS_0 +#define VBR_NRT_DMA_QOS CBM_QD_W3_QOS_0 +#define UBR_PLUS_DMA_QOS CBM_QD_W3_QOS_0 +#define UBR_DMA_QOS CBM_QD_W3_QOS_0 + +#define SRC_TOS_MIPS 0 +#define AAL5R_SRPN 0x00000006//a5rneedshigherprioritythanDR +#define AAL5S_SRPN 0x00000005 +#define CBM_MIPS_SRPN 0x00000004 +#define QSB_SRPN 0x00000023 +#define HTU_SRPN1 0x00000022 +#define HTU_SRPN0 0x00000021 + +#endif //ATM_DEFINES_H + diff --git a/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h b/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h new file mode 100644 index 0000000000..f863342580 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/atm_mib.h @@ -0,0 +1,142 @@ +#ifndef AMAZON_ATM_MIB_H +#define AMAZON_ATM_MIB_H + +#ifdef CONFIG_IFX_ATM_MIB +#include +#ifdef __KERNEL__ +#include +#endif +#endif /* CONFIG_IFX_ATM_MIB */ + +#ifndef __KERNEL__ +#include +typedef unsigned int __u32; +#endif + +typedef struct{ + __u32 ifHCInOctets_h; + __u32 ifHCInOctets_l; + __u32 ifHCOutOctets_h; + __u32 ifHCOutOctets_l; + __u32 ifInErrors; + __u32 ifInUnknownProtos; + __u32 ifOutErrors; +}atm_cell_ifEntry_t; + +typedef struct{ + __u32 ifHCInOctets_h; + __u32 ifHCInOctets_l; + __u32 ifHCOutOctets_h; + __u32 ifHCOutOctets_l; + __u32 ifInUcastPkts; + __u32 ifOutUcastPkts; + __u32 ifInErrors; + __u32 ifInDiscards; + __u32 ifOutErros; + __u32 ifOutDiscards; +}atm_aal5_ifEntry_t; + +typedef struct{ + __u32 aal5VccCrcErrors; + __u32 aal5VccSarTimeOuts;//no timer support yet + __u32 aal5VccOverSizedSDUs; +}atm_aal5_vcc_t; + +#if defined(CONFIG_IFX_ATM_MIB) || defined(IFX_CONFIG_SNMP_ATM_MIB) +/* ATM-MIB data structures */ +typedef struct atmIfConfEntry { + int ifIndex; + int atmInterfaceMaxVpcs; + int atmInterfaceMaxVccs; + int atmInterfaceConfVpcs; + int atmInterfaceConfVccs; + int atmInterfaceMaxActiveVpiBits; + int atmInterfaceMaxActiveVciBits; + int atmInterfaceIlmiVpi; + int atmInterfaceIlmiVci; + int atmInterfaceAddressType; + char atmInterfaceAdminAddress[40]; + unsigned long atmInterfaceMyNeighborIpAddress; + char atmInterfaceMyNeighborIfName[20]; + int atmInterfaceCurrentMaxVpiBits; + int atmInterfaceCurrentMaxVciBits; + char atmInterfaceSubscrAddress[40]; + int flags; +}atmIfConfEntry; + +typedef struct atmTrafficDescParamEntry { + /* Following three parameters are used to update VCC QoS values */ + int ifIndex; + short atmVclvpi; + int atmVclvci; + + unsigned int atmTrafficParamIndex; + unsigned char traffic_class; + int max_pcr; + /* Subramani: Added min_pcr */ + int min_pcr; + int cdv; + int scr; + int mbs; + int atmTrafficRowStatus; + int atmTrafficFrameDiscard; + struct list_head vpivci_head; + struct list_head list; +}atmTrafficDescParamEntry; + + +typedef struct atmVclEntry { + int ifIndex; + short atmVclvpi; + int atmVclvci; + char vpivci[20]; + int atmVclAdminStatus; + int atmVclOperStatus; + unsigned long atmVclLastChange; + struct atmTrafficDescParamEntry *atmVclRxTrafficPtr; + struct atmTrafficDescParamEntry *atmVclTxTrafficPtr; + unsigned char atmVccAalType; + unsigned int atmVccAal5TxSduSize; + unsigned int atmVccAal5RxSduSize; + int atmVccAal5Encap; + int atmVclRowStatus; + int atmVclCastType; + int atmVclConnKind; + struct list_head list; + int flags; +}atmVclEntry; + + +typedef union union_atmptrs { + struct atmIfConfEntry *atmIfConfEntry_ptr; + struct atmTrafficDescParamEntry *atmTrafficDescParamEntry_ptr; + struct atmVclEntry *atmVclEntry_ptr; +}union_atmptrs; + +/* ATM Character device major number */ +#define ATM_MEI_MAJOR 107 + +/* Protocol Constants */ +#define IFX_PROTO_RAW 0 +#define IFX_PROTO_BR2684 1 +#define IFX_PROTO_PPPOATM 2 +#define IFX_PROTO_CLIP 3 + +/* IOCTL Command Set for ATM-MIB */ +#define GET_ATM_IF_CONF_DATA 0x0AB0 +#define SET_ATM_IF_CONF_DATA 0x0AB1 + +#define SET_ATM_QOS_DATA 0x0BC0 + +#define GET_ATM_VCL_DATA 0x0CD0 +#define SET_ATM_VCL_DATA 0x0CD1 + +#define FIND_VCC_IN_KERNEL 0x0DE0 + +/* User defined flags for VCL Table */ +#define ATMVCCAAL5CPCSTRANSMITSDUSIZE 9 +#define ATMVCCAAL5CPCSRECEIVESDUSIZE 10 + +#endif /* CONFIG_IFX_ATM_MIB || IFX_CONFIG_SNMP_ATM_MIB */ + +#endif //AMAZON_ATM_MIB_H diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h new file mode 100644 index 0000000000..65f14e405f --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/ifx_peripheral_definitions.h @@ -0,0 +1,96 @@ +//************************************************************************* +//* Summary of definitions which are used in each peripheral * +//************************************************************************* + +#ifndef peripheral_definitions_h +#define peripheral_definitions_h + +typedef unsigned char UINT8; +typedef signed char INT8; +typedef unsigned short UINT16; +typedef signed short INT16; +typedef unsigned int UINT32; +typedef signed int INT32; +typedef unsigned long long UINT64; +typedef signed long long INT64; + +#define REG8( addr ) (*(volatile UINT8 *) (addr)) +#define REG16( addr ) (*(volatile UINT16 *)(addr)) +#define REG32( addr ) (*(volatile UINT32 *)(addr)) +#define REG64( addr ) (*(volatile UINT64 *)(addr)) + +/* define routine to set FPI access in Supervisor Mode */ +#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01 +/* Supervisor mode ends, following functions will be done in User mode */ +#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00 +/* Supervisor mode ends, following functions will be done in User mode */ +#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG) +/* Supervisor mode ends, following functions will be done in User mode */ +#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm +/* enable all Interrupts in IIU */ +//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask +///* get all high priority interrupt bits in IIU */ +//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED) +///* signal ends of interrupt to IIU */ +//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit +///* force IIU interrupt register */ +//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data +///* get all bits of interrupt register */ +//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR) +/* insert a NOP instruction */ +#define NOP _nop() +/* CPU goes to power down mode until interrupt occurs */ +#define IFX_CPU_SLEEP _sleep() +/* enable all interrupts to CPU */ +#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int() +/* get all low priority interrupt bits in peripheral */ +#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg) +/* clear low priority interrupt bit in peripheral */ +#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit +/* write FPI bus */ +#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data +#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data +#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data +/* read FPI bus */ +#define READ_FPI_BYTE(addr) REG8(addr) +#define READ_FPI_16BIT(addr) REG16(addr) +#define READ_FPI_32BIT(addr) REG32(addr) +/* write peripheral register */ +#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data +#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data +#else //not CONFIG_CPU_LITTLE_ENDIAN +#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data +#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data +#endif //CONFIG_CPU_LITTLE_ENDIAN + +/* read peripheral register */ +#define READ_PERIPHERAL_REGISTER(addr) REG32(addr) + +/* read/modify(or)/write peripheral register */ +#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data +/* read/modify(and)/write peripheral register */ +#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data + +/* CPU-independent mnemonic constants */ +/* CLC register bits */ +#define IFX_CLC_ENABLE 0x00000000 +#define IFX_CLC_DISABLE 0x00000001 +#define IFX_CLC_DISABLE_STATUS 0x00000002 +#define IFX_CLC_SUSPEND_ENABLE 0x00000004 +#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008 +#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010 +#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020 +#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00 +#define IFX_CLC_RUN_DIVIDER_OFFSET 8 +#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000 +#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16 +#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000 +#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24 + +/* number of cycles to wait for interrupt service routine to be called */ +#define WAIT_CYCLES 50 + +#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h new file mode 100644 index 0000000000..e5d73ad4ec --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc.h @@ -0,0 +1,263 @@ +/* + * ifx_ssc.h defines some data sructures used in ifx_ssc.c + * + * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT) + * + * + */ + +#ifndef __IFX_SSC_H +#define __IFX_SSC_H +#ifdef __KERNEL__ +#include +#endif //__KERNEL__ + +#define PORT_CNT 1 // assume default value + +/* symbolic constants to be used in SSC routines */ + +// ### TO DO: bad performance +#define IFX_SSC_TXFIFO_ITL 1 +#define IFX_SSC_RXFIFO_ITL 1 + + + +struct ifx_ssc_statistics{ + unsigned int abortErr; /* abort error */ + unsigned int modeErr; /* master/slave mode error */ + unsigned int txOvErr; /* TX Overflow error */ + unsigned int txUnErr; /* TX Underrun error */ + unsigned int rxOvErr; /* RX Overflow error */ + unsigned int rxUnErr; /* RX Underrun error */ + unsigned int rxBytes; + unsigned int txBytes; +}; + + +struct ifx_ssc_hwopts { + unsigned int AbortErrDetect :1; /* Abort Error detection (in slave mode) */ + unsigned int rxOvErrDetect :1; /* Receive Overflow Error detection */ + unsigned int rxUndErrDetect :1; /* Receive Underflow Error detection */ + unsigned int txOvErrDetect :1; /* Transmit Overflow Error detection */ + unsigned int txUndErrDetect :1; /* Transmit Underflow Error detection */ + unsigned int echoMode :1; /* Echo mode */ + unsigned int loopBack :1; /* Loopback mode */ + unsigned int idleValue :1; /* Idle value */ + unsigned int clockPolarity :1; /* Idle clock is high or low */ + unsigned int clockPhase :1; /* Tx on trailing or leading edge*/ + unsigned int headingControl :1; /* LSB first or MSB first */ + unsigned int dataWidth :6; /* from 2 up to 32 bits */ + unsigned int masterSelect :1; /* Master or Slave mode */ + unsigned int modeRxTx :2; /* rx/tx mode */ + unsigned int gpoCs :8; /* choose outputs to use for chip select */ + unsigned int gpoInv :8; /* invert GPO outputs */ +}; + + +struct ifx_ssc_frm_opts { + bool FrameEnable; // SFCON.SFEN + unsigned int DataLength; // SFCON.DLEN + unsigned int PauseLength; // SFCON.PLEN + unsigned int IdleData; // SFCON.IDAT + unsigned int IdleClock; // SFCON.ICLK + bool StopAfterPause; // SFCON.STOP +}; + +struct ifx_ssc_frm_status { + bool DataBusy; // SFSTAT.DBSY + bool PauseBusy; // SFSTAT.PBSY + unsigned int DataCount; // SFSTAT.DCNT + unsigned int PauseCount; // SFSTAT.PCNT + bool EnIntAfterData; // SFCON.IBEN + bool EnIntAfterPause;// SFCON.IAEN +}; + +typedef struct { + char *buf; + size_t len; +} ifx_ssc_buf_item_t; + + +// data structures for batch execution +typedef union { + struct { + bool save_options; + } init; + ifx_ssc_buf_item_t read; + ifx_ssc_buf_item_t write; + ifx_ssc_buf_item_t rd_wr; + unsigned int set_baudrate; + struct ifx_ssc_frm_opts set_frm; + unsigned int set_gpo; + struct ifx_ssc_hwopts set_hwopts; +}ifx_ssc_batch_cmd_param; + +struct ifx_ssc_batch_list { + unsigned int cmd; + ifx_ssc_batch_cmd_param cmd_param; + struct ifx_ssc_batch_list *next; +}; + +#ifdef __KERNEL__ +#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE) + + +struct ifx_ssc_port{ + unsigned long mapbase; + struct ifx_ssc_hwopts opts; + struct ifx_ssc_statistics stats; + struct ifx_ssc_frm_status frm_status; + struct ifx_ssc_frm_opts frm_opts; + /* wait queue for ifx_ssc_read() */ + wait_queue_head_t rwait, pwait; + int port_nr; + char port_is_open; /* exclusive open - boolean */ +// int no_of_bits; /* number of _valid_ bits */ +// int elem_size; /* shift for element (no of bytes)*/ + /* buffer and pointers to the read/write position */ + char *rxbuf; /* buffer for RX */ + char *rxbuf_end; /* buffer end pointer for RX */ + volatile char *rxbuf_ptr; /* buffer write pointer for RX */ + char *txbuf; /* buffer for TX */ + char *txbuf_end; /* buffer end pointer for TX */ + volatile char *txbuf_ptr; /* buffer read pointer for TX */ + unsigned int baud; + /* each channel has its own interrupts */ + /* (transmit/receive/error/frame) */ + unsigned int txirq, rxirq, errirq, frmirq; +}; +/* default values for SSC configuration */ +// values of CON +#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */ +#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */ +#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */ +#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */ +#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */ +#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */ +#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */ +#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */ +#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */ +#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST +#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX +// other values +#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */ +#define IFX_SSC_DEF_BAUDRATE 1000000 +#define IFX_SSC_DEF_RMC 0x10 + +#define IFX_SSC_DEF_TXFIFO_FL 8 +#define IFX_SSC_DEF_RXFIFO_FL 1 + +#if 1 //TODO +#define IFX_SSC_DEF_GPO_CS 2 /* no chip select */ +#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */ +#else +#error "what is ur Chip Select???" +#endif +#define IFX_SSC_DEF_SFCON 0 /* no serial framing */ +#if 0 +#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ + IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT +#endif +#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\ + IFX_SSC_R_BIT | IFX_SSC_E_BIT +#endif /* __KERNEL__ */ + +// batch execution commands +#define IFX_SSC_BATCH_CMD_INIT 1 +#define IFX_SSC_BATCH_CMD_READ 2 +#define IFX_SSC_BATCH_CMD_WRITE 3 +#define IFX_SSC_BATCH_CMD_RD_WR 4 +#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5 +#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6 +#define IFX_SSC_BATCH_CMD_SET_FRM 7 +#define IFX_SSC_BATCH_CMD_SET_GPO 8 +#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9 +//#define IFX_SSC_BATCH_CMD_ +//#define IFX_SSC_BATCH_CMD_ +#define IFX_SSC_BATCH_CMD_END_EXEC 0 + +/* Macros to configure SSC hardware */ +/* headingControl: */ +#define IFX_SSC_LSB_FIRST 0 +#define IFX_SSC_MSB_FIRST 1 +/* dataWidth: */ +#define IFX_SSC_MIN_DATA_WIDTH 2 +#define IFX_SSC_MAX_DATA_WIDTH 32 +/* master/slave mode select */ +#define IFX_SSC_MASTER_MODE 1 +#define IFX_SSC_SLAVE_MODE 0 +/* rx/tx mode */ +// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h +#define IFX_SSC_MODE_RXTX 0 +#define IFX_SSC_MODE_RX 1 +#define IFX_SSC_MODE_TX 2 +#define IFX_SSC_MODE_OFF 3 +#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX + +/* GPO values */ +#define IFX_SSC_MAX_GPO_OUT 7 + +#define IFX_SSC_RXREQ_BLOCK_SIZE 32768 + +/***********************/ +/* defines for ioctl's */ +/***********************/ +#define IFX_SSC_IOCTL_MAGIC 'S' +/* read out the statistics */ +#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics) +/* clear the statistics */ +#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2) +/* set the baudrate */ +#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int) +/* get the current baudrate */ +#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int) +/* set hardware options */ +#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts) +/* get the current hardware options */ +#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts) +/* set transmission mode */ +#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int) +/* get the current transmission mode */ +#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int) +/* abort transmission */ +#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9) +#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9) + +/* set general purpose outputs */ +#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int) +/* clear general purpose outputs */ +#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int) +/* get general purpose outputs */ +#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int) + +/*** serial framing ***/ +/* get status of serial framing */ +#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status) +/* get counter reload values and control bits */ +#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts) +/* set counter reload values and control bits */ +#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts) + + +/*** batch execution ***/ +/* do batch execution */ +#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list) + + +#ifdef __KERNEL__ +// routines from ifx_ssc.c +// ### TO DO +/* kernel interface for read and write */ +ssize_t ifx_ssc_kread(int, char *, size_t); +ssize_t ifx_ssc_kwrite(int, const char *, size_t); + +#ifdef CONFIG_IFX_VP_KERNEL_TEST +void ifx_ssc_tc(void); +#endif // CONFIG_IFX_VP_KERNEL_TEST + +#endif //__KERNEL__ +#endif // __IFX_SSC_H + diff --git a/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h new file mode 100644 index 0000000000..46157dcbd6 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/ifx_ssc_defines.h @@ -0,0 +1,552 @@ +#ifndef IFX_SSC_DEFINES_H +#define IFX_SSC_DEFINES_H + +#include "ifx_peripheral_definitions.h" + +/* maximum SSC FIFO size */ +#define IFX_SSC_MAX_FIFO_SIZE 32 + +/* register map of SSC */ + +/* address of the Clock Control Register of the SSC */ +#define IFX_SSC_CLC 0x00000000 +/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0 + bit 1 is hardware modified*/ +#define IFX_SSC_CLC_readmask 0x00FFFFEF +#define IFX_SSC_CLC_writemask 0x00FFFF3D +#define IFX_SSC_CLC_hwmask 0x00000002 +#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask) + +/* address of Port Input Select Register of the SSC */ +#define IFX_SSC_PISEL 0x00000004 +/* IFX_SSC_PISEL register is significant in lowest three bits only */ +#define IFX_SSC_PISEL_readmask 0x00000007 +#define IFX_SSC_PISEL_writemask 0x00000007 +#define IFX_SSC_PISEL_hwmask 0x00000000 +#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask) + +/* address of Identification Register of the SSC */ +#define IFX_SSC_ID 0x00000008 +/* IFX_SSC_ID register is significant in no bit */ +#define IFX_SSC_ID_readmask 0x0000FF3F +#define IFX_SSC_ID_writemask 0x00000000 +#define IFX_SSC_ID_hwmask 0x00000000 +#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask) + +/* address of the Control Register of the SSC */ +#define IFX_SSC_CON 0x00000010 +/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */ +#define IFX_SSC_CON_readmask 0x01DF1FFF +#define IFX_SSC_CON_writemask 0x01DF1FFF +#define IFX_SSC_CON_hwmask 0x00000000 +#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask) + + +/* address of the Status Register of the SSC */ +#define IFX_SSC_STATE 0x00000014 +/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0 + all bits except 1:0 are hardware modified */ +#define IFX_SSC_STATE_readmask 0x771F3F87 +#define IFX_SSC_STATE_writemask 0x00000000 +#define IFX_SSC_STATE_hwmask 0x771F3F84 +#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask) + +/* address of the Write Hardware Modified Control Register Bits of the SSC */ +#define IFX_SSC_WHBSTATE 0x00000018 +/* IFX_SSC_WHBSTATE register is write only */ +#define IFX_SSC_WHBSTATE_readmask 0x00000000 +#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF +#define IFX_SSC_WHBSTATE_hwmask 0x00000000 +#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask) + +/* address of the Baudrate Timer Reload Register of the SSC */ +#define IFX_SSC_BR 0x00000040 +/* IFX_SSC_BR register is significant in bit 15 downto 0*/ +#define IFX_SSC_BR_readmask 0x0000FFFF +#define IFX_SSC_BR_writemask 0x0000FFFF +#define IFX_SSC_BR_hwmask 0x00000000 +#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask) + +/* address of the Baudrate Timer Status Register of the SSC */ +#define IFX_SSC_BRSTAT 0x00000044 +/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/ +#define IFX_SSC_BRSTAT_readmask 0x0000FFFF +#define IFX_SSC_BRSTAT_writemask 0x00000000 +#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF +#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask) + +/* address of the Transmitter Buffer Register of the SSC */ +#define IFX_SSC_TB 0x00000020 +/* IFX_SSC_TB register is significant in bit 31 downto 0*/ +#define IFX_SSC_TB_readmask 0xFFFFFFFF +#define IFX_SSC_TB_writemask 0xFFFFFFFF +#define IFX_SSC_TB_hwmask 0x00000000 +#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask) + +/* address of the Reciver Buffer Register of the SSC */ +#define IFX_SSC_RB 0x00000024 +/* IFX_SSC_RB register is significant in no bits*/ +#define IFX_SSC_RB_readmask 0xFFFFFFFF +#define IFX_SSC_RB_writemask 0x00000000 +#define IFX_SSC_RB_hwmask 0xFFFFFFFF +#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask) + +/* address of the Receive FIFO Control Register of the SSC */ +#define IFX_SSC_RXFCON 0x00000030 +/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ +#define IFX_SSC_RXFCON_readmask 0x00003F03 +#define IFX_SSC_RXFCON_writemask 0x00003F03 +#define IFX_SSC_RXFCON_hwmask 0x00000000 +#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask) + +/* address of the Transmit FIFO Control Register of the SSC */ +#define IFX_SSC_TXFCON 0x00000034 +/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */ +#define IFX_SSC_TXFCON_readmask 0x00003F03 +#define IFX_SSC_TXFCON_writemask 0x00003F03 +#define IFX_SSC_TXFCON_hwmask 0x00000000 +#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask) + +/* address of the FIFO Status Register of the SSC */ +#define IFX_SSC_FSTAT 0x00000038 +/* IFX_SSC_FSTAT register is significant in no bit*/ +#define IFX_SSC_FSTAT_readmask 0x00003F3F +#define IFX_SSC_FSTAT_writemask 0x00000000 +#define IFX_SSC_FSTAT_hwmask 0x00003F3F +#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask) + +/* address of the Data Frame Control register of the SSC */ +#define IFX_SSC_SFCON 0x00000060 +#define IFX_SSC_SFCON_readmask 0xFFDFFFFD +#define IFX_SSC_SFCON_writemask 0xFFDFFFFD +#define IFX_SSC_SFCON_hwmask 0x00000000 +#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask) + +/* address of the Data Frame Status register of the SSC */ +#define IFX_SSC_SFSTAT 0x00000064 +#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3 +#define IFX_SSC_SFSTAT_writemask 0x00000000 +#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3 +#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask) + +/* address of the General Purpose Output Control register of the SSC */ +#define IFX_SSC_GPOCON 0x00000070 +#define IFX_SSC_GPOCON_readmask 0x0000FFFF +#define IFX_SSC_GPOCON_writemask 0x0000FFFF +#define IFX_SSC_GPOCON_hwmask 0x00000000 +#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask) + +/* address of the General Purpose Output Status register of the SSC */ +#define IFX_SSC_GPOSTAT 0x00000074 +#define IFX_SSC_GPOSTAT_readmask 0x000000FF +#define IFX_SSC_GPOSTAT_writemask 0x00000000 +#define IFX_SSC_GPOSTAT_hwmask 0x00000000 +#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask) + +/* address of the Force GPO Status register of the SSC */ +#define IFX_SSC_WHBGPOSTAT 0x00000078 +#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000 +#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF +#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000 +#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask) + +/* address of the Receive Request Register of the SSC */ +#define IFX_SSC_RXREQ 0x00000080 +#define IFX_SSC_RXREQ_readmask 0x0000FFFF +#define IFX_SSC_RXREQ_writemask 0x0000FFFF +#define IFX_SSC_RXREQ_hwmask 0x00000000 +#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask) + +/* address of the Receive Count Register of the SSC */ +#define IFX_SSC_RXCNT 0x00000084 +#define IFX_SSC_RXCNT_readmask 0x0000FFFF +#define IFX_SSC_RXCNT_writemask 0x00000000 +#define IFX_SSC_RXCNT_hwmask 0x0000FFFF +#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask) + +/* address of the DMA Configuration Register of the SSC */ +#define IFX_SSC_DMACON 0x000000EC +#define IFX_SSC_DMACON_readmask 0x0000FFFF +#define IFX_SSC_DMACON_writemask 0x00000000 +#define IFX_SSC_DMACON_hwmask 0x0000FFFF +#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask) + +//------------------------------------------------------ +// interrupt register for enabling interrupts, mask register of irq_reg +#define IFX_SSC_IRN_EN 0xF4 +// read/write +#define IFX_SSC_IRN_EN_readmask 0x0000000F +#define IFX_SSC_IRN_EN_writemask 0x0000000F +#define IFX_SSC_IRN_EN_hwmask 0x00000000 +#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask) + +// interrupt register for accessing interrupts +#define IFX_SSC_IRN_CR 0xF8 +// read/write +#define IFX_SSC_IRN_CR_readmask 0x0000000F +#define IFX_SSC_IRN_CR_writemask 0x0000000F +#define IFX_SSC_IRN_CR_hwmask 0x0000000F +#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask) + +// interrupt register for stimulating interrupts +#define IFX_SSC_IRN_ICR 0xFC +// read/write +#define IFX_SSC_IRN_ICR_readmask 0x0000000F +#define IFX_SSC_IRN_ICR_writemask 0x0000000F +#define IFX_SSC_IRN_ICR_hwmask 0x00000000 +#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask) + +//--------------------------------------------------------------------- +// Number of IRQs and bitposition of IRQ +#define IFX_SSC_NUM_IRQ 4 +#define IFX_SSC_T_BIT 0x00000001 +#define IFX_SSC_R_BIT 0x00000002 +#define IFX_SSC_E_BIT 0x00000004 +#define IFX_SSC_F_BIT 0x00000008 + +/* bit masks for SSC registers */ + +/* ID register */ +#define IFX_SSC_PERID_REV_MASK 0x0000001F +#define IFX_SSC_PERID_CFG_MASK 0x00000020 +#define IFX_SSC_PERID_ID_MASK 0x0000FF00 +#define IFX_SSC_PERID_REV_OFFSET 0 +#define IFX_SSC_PERID_CFG_OFFSET 5 +#define IFX_SSC_PERID_ID_OFFSET 8 +#define IFX_SSC_PERID_ID 0x45 +#define IFX_SSC_PERID_DMA_ON 0x00000020 +#define IFX_SSC_PERID_RXFS_MASK 0x003F0000 +#define IFX_SSC_PERID_RXFS_OFFSET 16 +#define IFX_SSC_PERID_TXFS_MASK 0x3F000000 +#define IFX_SSC_PERID_TXFS_OFFSET 24 + +/* PISEL register */ +#define IFX_SSC_PISEL_MASTER_IN_A 0x0000 +#define IFX_SSC_PISEL_MASTER_IN_B 0x0001 +#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000 +#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002 +#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000 +#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004 + + +/* IFX_SSC_CON register */ +#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000 +#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000 +#define IFX_SSC_CON_IDLE_HIGH 0x00800000 +#define IFX_SSC_CON_IDLE_LOW 0x00000000 +#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000 +#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000 +#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16 +#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000 +#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK) + +#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000 +#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000 + +#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000 +#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000 +#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800 +#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000 +#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400 +#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000 +#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200 +#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000 +#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100 +#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000 +#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00 +#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000 + +#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080 +#define IFX_SSC_CON_NO_LOOPBACK 0x00000000 +#define IFX_SSC_CON_HALF_DUPLEX 0x00000080 +#define IFX_SSC_CON_FULL_DUPLEX 0x00000000 +#define IFX_SSC_CON_CLOCK_FALL 0x00000040 +#define IFX_SSC_CON_CLOCK_RISE 0x00000000 +#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000 +#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020 +#define IFX_SSC_CON_MSB_FIRST 0x00000010 +#define IFX_SSC_CON_LSB_FIRST 0x00000000 +#define IFX_SSC_CON_ENABLE_CSB 0x00000008 +#define IFX_SSC_CON_DISABLE_CSB 0x00000000 +#define IFX_SSC_CON_INVERT_CSB 0x00000004 +#define IFX_SSC_CON_TRUE_CSB 0x00000000 +#define IFX_SSC_CON_RX_OFF 0x00000002 +#define IFX_SSC_CON_RX_ON 0x00000000 +#define IFX_SSC_CON_TX_OFF 0x00000001 +#define IFX_SSC_CON_TX_ON 0x00000000 + + +/* IFX_SSC_STATE register */ +#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28 +#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000 +#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET) +#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24 +#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000 +#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET) +#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16 +#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000 +#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1) +#define IFX_SSC_STATE_BUSY 0x00002000 +#define IFX_SSC_STATE_RX_UFL 0x00001000 +#define IFX_SSC_STATE_TX_UFL 0x00000800 +#define IFX_SSC_STATE_ABORT_ERR 0x00000400 +#define IFX_SSC_STATE_RX_OFL 0x00000200 +#define IFX_SSC_STATE_TX_OFL 0x00000100 +#define IFX_SSC_STATE_MODE_ERR 0x00000080 +#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004 +#define IFX_SSC_STATE_IS_MASTER 0x00000002 +#define IFX_SSC_STATE_IS_ENABLED 0x00000001 + +/* WHBSTATE register */ +#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001 +#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001 +#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001 + +#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002 +#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002 +#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002 + +#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004 +#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004 + +#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008 +#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008 + +#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010 +#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020 + +#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040 +#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080 + +#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100 +#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200 +#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400 +#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800 +#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000 +#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000 +#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000 +#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000 +#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50 +#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0 + +/* BR register */ +#define IFX_SSC_BR_BAUDRATE_OFFSET 0 +#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF + +/* BR_STAT register */ +#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0 +#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF + +/* TB register */ +#define IFX_SSC_TB_DATA_OFFSET 0 +#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF + +/* RB register */ +#define IFX_SSC_RB_DATA_OFFSET 0 +#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF + + +/* RXFCON and TXFCON registers */ +#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000 +#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001 +#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002 +#define IFX_SSC_XFCON_ITL_MASK 0x00003F00 +#define IFX_SSC_XFCON_ITL_OFFSET 8 + +/* FSTAT register */ +#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0 +#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F +#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8 +#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00 + +/* GPOCON register */ +#define IFX_SSC_GPOCON_INVOUT0_POS 0 +#define IFX_SSC_GPOCON_INV_OUT0 0x00000001 +#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000 +#define IFX_SSC_GPOCON_INVOUT1_POS 1 +#define IFX_SSC_GPOCON_INV_OUT1 0x00000002 +#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000 +#define IFX_SSC_GPOCON_INVOUT2_POS 2 +#define IFX_SSC_GPOCON_INV_OUT2 0x00000003 +#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000 +#define IFX_SSC_GPOCON_INVOUT3_POS 3 +#define IFX_SSC_GPOCON_INV_OUT3 0x00000008 +#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000 +#define IFX_SSC_GPOCON_INVOUT4_POS 4 +#define IFX_SSC_GPOCON_INV_OUT4 0x00000010 +#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000 +#define IFX_SSC_GPOCON_INVOUT5_POS 5 +#define IFX_SSC_GPOCON_INV_OUT5 0x00000020 +#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000 +#define IFX_SSC_GPOCON_INVOUT6_POS 6 +#define IFX_SSC_GPOCON_INV_OUT6 0x00000040 +#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000 +#define IFX_SSC_GPOCON_INVOUT7_POS 7 +#define IFX_SSC_GPOCON_INV_OUT7 0x00000080 +#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000 +#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF +#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000 + +#define IFX_SSC_GPOCON_ISCSB0_POS 8 +#define IFX_SSC_GPOCON_IS_CSB0 0x00000100 +#define IFX_SSC_GPOCON_IS_GPO0 0x00000000 +#define IFX_SSC_GPOCON_ISCSB1_POS 9 +#define IFX_SSC_GPOCON_IS_CSB1 0x00000200 +#define IFX_SSC_GPOCON_IS_GPO1 0x00000000 +#define IFX_SSC_GPOCON_ISCSB2_POS 10 +#define IFX_SSC_GPOCON_IS_CSB2 0x00000400 +#define IFX_SSC_GPOCON_IS_GPO2 0x00000000 +#define IFX_SSC_GPOCON_ISCSB3_POS 11 +#define IFX_SSC_GPOCON_IS_CSB3 0x00000800 +#define IFX_SSC_GPOCON_IS_GPO3 0x00000000 +#define IFX_SSC_GPOCON_ISCSB4_POS 12 +#define IFX_SSC_GPOCON_IS_CSB4 0x00001000 +#define IFX_SSC_GPOCON_IS_GPO4 0x00000000 +#define IFX_SSC_GPOCON_ISCSB5_POS 13 +#define IFX_SSC_GPOCON_IS_CSB5 0x00002000 +#define IFX_SSC_GPOCON_IS_GPO5 0x00000000 +#define IFX_SSC_GPOCON_ISCSB6_POS 14 +#define IFX_SSC_GPOCON_IS_CSB6 0x00004000 +#define IFX_SSC_GPOCON_IS_GPO6 0x00000000 +#define IFX_SSC_GPOCON_ISCSB7_POS 15 +#define IFX_SSC_GPOCON_IS_CSB7 0x00008000 +#define IFX_SSC_GPOCON_IS_GPO7 0x00000000 +#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00 +#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000 + +/* GPOSTAT register */ +#define IFX_SSC_GPOSTAT_OUT0 0x00000001 +#define IFX_SSC_GPOSTAT_OUT1 0x00000002 +#define IFX_SSC_GPOSTAT_OUT2 0x00000004 +#define IFX_SSC_GPOSTAT_OUT3 0x00000008 +#define IFX_SSC_GPOSTAT_OUT4 0x00000010 +#define IFX_SSC_GPOSTAT_OUT5 0x00000020 +#define IFX_SSC_GPOSTAT_OUT6 0x00000040 +#define IFX_SSC_GPOSTAT_OUT7 0x00000080 +#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF + +/* WHBGPOSTAT register */ +#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001 +#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002 +#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004 +#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008 +#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010 +#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020 +#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040 +#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080 +#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF + +#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0 +#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1 +#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2 +#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3 +#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4 +#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5 +#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6 +#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7 + + +#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8 +#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100 +#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9 +#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200 +#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10 +#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400 +#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11 +#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800 +#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12 +#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000 +#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13 +#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000 +#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14 +#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000 +#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15 +#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000 +#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00 + +/* SFCON register */ +#define IFX_SSC_SFCON_SF_ENABLE 0x00000001 +#define IFX_SSC_SFCON_SF_DISABLE 0x00000000 +#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004 +#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000 +#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008 +#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000 +#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0 +#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4 +#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000 +#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16 +#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000 +#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000 +#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18 +#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000 +#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000 +#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000 +#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000 +#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000 +#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22 +#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096 +#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024 + +#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET) +#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) +#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK) +#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) + +/* SFSTAT register */ +#define IFX_SSC_SFSTAT_IN_DATA 0x00000001 +#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002 +#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0 +#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4 +#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000 +#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20 + +#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET) +#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET) + +/* RXREQ register */ +#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF +#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0 + +/* RXCNT register */ +#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF +#define IFX_SSC_RXCNT_TODO_OFFSET 0 + +/* DMACON register */ +#define IFX_SSC_DMACON_RXON 0x00000001 +#define IFX_SSC_DMACON_RXOFF 0x00000000 +#define IFX_SSC_DMACON_TXON 0x00000002 +#define IFX_SSC_DMACON_TXOFF 0x00000000 +#define IFX_SSC_DMACON_DMAON 0x00000003 +#define IFX_SSC_DMACON_DMAOFF 0x00000000 +#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C +#define IFX_SSC_DMACON_CLASS_OFFSET 2 + +/* register access macros */ +#define ifx_ssc_fstat_received_words(status) (status & 0x003F) +#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8) + +#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE)) +#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON)) +#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON)) +#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE)) +#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB)) +#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB)) +#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT)) +#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR)) + +#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET) +#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET) + +#endif diff --git a/target/linux/amazon/files/include/asm-mips/amazon/irq.h b/target/linux/amazon/files/include/asm-mips/amazon/irq.h new file mode 100644 index 0000000000..c575dd64b2 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/irq.h @@ -0,0 +1,200 @@ +/* irq.h - AMAZON interrupts */ + +#ifndef __AMAZON_IRQ +#define __AMAZON_IRQ + +/************************************************************************ + * Interrupt information +*************************************************************************/ + +/* these vectors are to handle the interrupts from the internal AMAZON + interrupt controller. THe INT_NUM values are really just indices into + an array and are set up so that we can use the INT_NUM as a shift + to calculate a mask value. */ +#define INT_NUM_IRQ0 8 +#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0) +#define INT_NUM_IM0_IRL1 (INT_NUM_IRQ0 + 1) +#define INT_NUM_IM0_IRL2 (INT_NUM_IRQ0 + 2) +#define INT_NUM_IM0_IRL3 (INT_NUM_IRQ0 + 3) +#define INT_NUM_IM0_IRL4 (INT_NUM_IRQ0 + 4) +#define INT_NUM_IM0_IRL5 (INT_NUM_IRQ0 + 5) +#define INT_NUM_IM0_IRL6 (INT_NUM_IRQ0 + 6) +#define INT_NUM_IM0_IRL7 (INT_NUM_IRQ0 + 7) +#define INT_NUM_IM0_IRL8 (INT_NUM_IRQ0 + 8) +#define INT_NUM_IM0_IRL9 (INT_NUM_IRQ0 + 9) +#define INT_NUM_IM0_IRL10 (INT_NUM_IRQ0 + 10) +#define INT_NUM_IM0_IRL11 (INT_NUM_IRQ0 + 11) +#define INT_NUM_IM0_IRL12 (INT_NUM_IRQ0 + 12) +#define INT_NUM_IM0_IRL13 (INT_NUM_IRQ0 + 13) +#define INT_NUM_IM0_IRL14 (INT_NUM_IRQ0 + 14) +#define INT_NUM_IM0_IRL15 (INT_NUM_IRQ0 + 15) +#define INT_NUM_IM0_IRL16 (INT_NUM_IRQ0 + 16) +#define INT_NUM_IM0_IRL17 (INT_NUM_IRQ0 + 17) +#define INT_NUM_IM0_IRL18 (INT_NUM_IRQ0 + 18) +#define INT_NUM_IM0_IRL19 (INT_NUM_IRQ0 + 19) +#define INT_NUM_IM0_IRL20 (INT_NUM_IRQ0 + 20) +#define INT_NUM_IM0_IRL21 (INT_NUM_IRQ0 + 21) +#define INT_NUM_IM0_IRL22 (INT_NUM_IRQ0 + 22) +#define INT_NUM_IM0_IRL23 (INT_NUM_IRQ0 + 23) +#define INT_NUM_IM0_IRL24 (INT_NUM_IRQ0 + 24) +#define INT_NUM_IM0_IRL25 (INT_NUM_IRQ0 + 25) +#define INT_NUM_IM0_IRL26 (INT_NUM_IRQ0 + 26) +#define INT_NUM_IM0_IRL27 (INT_NUM_IRQ0 + 27) +#define INT_NUM_IM0_IRL28 (INT_NUM_IRQ0 + 28) +#define INT_NUM_IM0_IRL29 (INT_NUM_IRQ0 + 29) +#define INT_NUM_IM0_IRL30 (INT_NUM_IRQ0 + 30) +#define INT_NUM_IM0_IRL31 (INT_NUM_IRQ0 + 31) + +#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32) +#define INT_NUM_IM1_IRL1 (INT_NUM_IM1_IRL0 + 1) +#define INT_NUM_IM1_IRL2 (INT_NUM_IM1_IRL0 + 2) +#define INT_NUM_IM1_IRL3 (INT_NUM_IM1_IRL0 + 3) +#define INT_NUM_IM1_IRL4 (INT_NUM_IM1_IRL0 + 4) +#define INT_NUM_IM1_IRL5 (INT_NUM_IM1_IRL0 + 5) +#define INT_NUM_IM1_IRL6 (INT_NUM_IM1_IRL0 + 6) +#define INT_NUM_IM1_IRL7 (INT_NUM_IM1_IRL0 + 7) +#define INT_NUM_IM1_IRL8 (INT_NUM_IM1_IRL0 + 8) +#define INT_NUM_IM1_IRL9 (INT_NUM_IM1_IRL0 + 9) +#define INT_NUM_IM1_IRL10 (INT_NUM_IM1_IRL0 + 10) +#define INT_NUM_IM1_IRL11 (INT_NUM_IM1_IRL0 + 11) +#define INT_NUM_IM1_IRL12 (INT_NUM_IM1_IRL0 + 12) +#define INT_NUM_IM1_IRL13 (INT_NUM_IM1_IRL0 + 13) +#define INT_NUM_IM1_IRL14 (INT_NUM_IM1_IRL0 + 14) +#define INT_NUM_IM1_IRL15 (INT_NUM_IM1_IRL0 + 15) +#define INT_NUM_IM1_IRL16 (INT_NUM_IM1_IRL0 + 16) +#define INT_NUM_IM1_IRL17 (INT_NUM_IM1_IRL0 + 17) +#define INT_NUM_IM1_IRL18 (INT_NUM_IM1_IRL0 + 18) +#define INT_NUM_IM1_IRL19 (INT_NUM_IM1_IRL0 + 19) +#define INT_NUM_IM1_IRL20 (INT_NUM_IM1_IRL0 + 20) +#define INT_NUM_IM1_IRL21 (INT_NUM_IM1_IRL0 + 21) +#define INT_NUM_IM1_IRL22 (INT_NUM_IM1_IRL0 + 22) +#define INT_NUM_IM1_IRL23 (INT_NUM_IM1_IRL0 + 23) +#define INT_NUM_IM1_IRL24 (INT_NUM_IM1_IRL0 + 24) +#define INT_NUM_IM1_IRL25 (INT_NUM_IM1_IRL0 + 25) +#define INT_NUM_IM1_IRL26 (INT_NUM_IM1_IRL0 + 26) +#define INT_NUM_IM1_IRL27 (INT_NUM_IM1_IRL0 + 27) +#define INT_NUM_IM1_IRL28 (INT_NUM_IM1_IRL0 + 28) +#define INT_NUM_IM1_IRL29 (INT_NUM_IM1_IRL0 + 29) +#define INT_NUM_IM1_IRL30 (INT_NUM_IM1_IRL0 + 30) +#define INT_NUM_IM1_IRL31 (INT_NUM_IM1_IRL0 + 31) + +#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64) +#define INT_NUM_IM2_IRL1 (INT_NUM_IM2_IRL0 + 1) +#define INT_NUM_IM2_IRL2 (INT_NUM_IM2_IRL0 + 2) +#define INT_NUM_IM2_IRL3 (INT_NUM_IM2_IRL0 + 3) +#define INT_NUM_IM2_IRL4 (INT_NUM_IM2_IRL0 + 4) +#define INT_NUM_IM2_IRL5 (INT_NUM_IM2_IRL0 + 5) +#define INT_NUM_IM2_IRL6 (INT_NUM_IM2_IRL0 + 6) +#define INT_NUM_IM2_IRL7 (INT_NUM_IM2_IRL0 + 7) +#define INT_NUM_IM2_IRL8 (INT_NUM_IM2_IRL0 + 8) +#define INT_NUM_IM2_IRL9 (INT_NUM_IM2_IRL0 + 9) +#define INT_NUM_IM2_IRL10 (INT_NUM_IM2_IRL0 + 10) +#define INT_NUM_IM2_IRL11 (INT_NUM_IM2_IRL0 + 11) +#define INT_NUM_IM2_IRL12 (INT_NUM_IM2_IRL0 + 12) +#define INT_NUM_IM2_IRL13 (INT_NUM_IM2_IRL0 + 13) +#define INT_NUM_IM2_IRL14 (INT_NUM_IM2_IRL0 + 14) +#define INT_NUM_IM2_IRL15 (INT_NUM_IM2_IRL0 + 15) +#define INT_NUM_IM2_IRL16 (INT_NUM_IM2_IRL0 + 16) +#define INT_NUM_IM2_IRL17 (INT_NUM_IM2_IRL0 + 17) +#define INT_NUM_IM2_IRL18 (INT_NUM_IM2_IRL0 + 18) +#define INT_NUM_IM2_IRL19 (INT_NUM_IM2_IRL0 + 19) +#define INT_NUM_IM2_IRL20 (INT_NUM_IM2_IRL0 + 20) +#define INT_NUM_IM2_IRL21 (INT_NUM_IM2_IRL0 + 21) +#define INT_NUM_IM2_IRL22 (INT_NUM_IM2_IRL0 + 22) +#define INT_NUM_IM2_IRL23 (INT_NUM_IM2_IRL0 + 23) +#define INT_NUM_IM2_IRL24 (INT_NUM_IM2_IRL0 + 24) +#define INT_NUM_IM2_IRL25 (INT_NUM_IM2_IRL0 + 25) +#define INT_NUM_IM2_IRL26 (INT_NUM_IM2_IRL0 + 26) +#define INT_NUM_IM2_IRL27 (INT_NUM_IM2_IRL0 + 27) +#define INT_NUM_IM2_IRL28 (INT_NUM_IM2_IRL0 + 28) +#define INT_NUM_IM2_IRL29 (INT_NUM_IM2_IRL0 + 29) +#define INT_NUM_IM2_IRL30 (INT_NUM_IM2_IRL0 + 30) +#define INT_NUM_IM2_IRL31 (INT_NUM_IM2_IRL0 + 31) + +#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96) +#define INT_NUM_IM3_IRL1 (INT_NUM_IM3_IRL0 + 1) +#define INT_NUM_IM3_IRL2 (INT_NUM_IM3_IRL0 + 2) +#define INT_NUM_IM3_IRL3 (INT_NUM_IM3_IRL0 + 3) +#define INT_NUM_IM3_IRL4 (INT_NUM_IM3_IRL0 + 4) +#define INT_NUM_IM3_IRL5 (INT_NUM_IM3_IRL0 + 5) +#define INT_NUM_IM3_IRL6 (INT_NUM_IM3_IRL0 + 6) +#define INT_NUM_IM3_IRL7 (INT_NUM_IM3_IRL0 + 7) +#define INT_NUM_IM3_IRL8 (INT_NUM_IM3_IRL0 + 8) +#define INT_NUM_IM3_IRL9 (INT_NUM_IM3_IRL0 + 9) +#define INT_NUM_IM3_IRL10 (INT_NUM_IM3_IRL0 + 10) +#define INT_NUM_IM3_IRL11 (INT_NUM_IM3_IRL0 + 11) +#define INT_NUM_IM3_IRL12 (INT_NUM_IM3_IRL0 + 12) +#define INT_NUM_IM3_IRL13 (INT_NUM_IM3_IRL0 + 13) +#define INT_NUM_IM3_IRL14 (INT_NUM_IM3_IRL0 + 14) +#define INT_NUM_IM3_IRL15 (INT_NUM_IM3_IRL0 + 15) +#define INT_NUM_IM3_IRL16 (INT_NUM_IM3_IRL0 + 16) +#define INT_NUM_IM3_IRL17 (INT_NUM_IM3_IRL0 + 17) +#define INT_NUM_IM3_IRL18 (INT_NUM_IM3_IRL0 + 18) +#define INT_NUM_IM3_IRL19 (INT_NUM_IM3_IRL0 + 19) +#define INT_NUM_IM3_IRL20 (INT_NUM_IM3_IRL0 + 20) +#define INT_NUM_IM3_IRL21 (INT_NUM_IM3_IRL0 + 21) +#define INT_NUM_IM3_IRL22 (INT_NUM_IM3_IRL0 + 22) +#define INT_NUM_IM3_IRL23 (INT_NUM_IM3_IRL0 + 23) +#define INT_NUM_IM3_IRL24 (INT_NUM_IM3_IRL0 + 24) +#define INT_NUM_IM3_IRL25 (INT_NUM_IM3_IRL0 + 25) +#define INT_NUM_IM3_IRL26 (INT_NUM_IM3_IRL0 + 26) +#define INT_NUM_IM3_IRL27 (INT_NUM_IM3_IRL0 + 27) +#define INT_NUM_IM3_IRL28 (INT_NUM_IM3_IRL0 + 28) +#define INT_NUM_IM3_IRL29 (INT_NUM_IM3_IRL0 + 29) +#define INT_NUM_IM3_IRL30 (INT_NUM_IM3_IRL0 + 30) +#define INT_NUM_IM3_IRL31 (INT_NUM_IM3_IRL0 + 31) + +#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128) +#define INT_NUM_IM4_IRL1 (INT_NUM_IM4_IRL0 + 1) +#define INT_NUM_IM4_IRL2 (INT_NUM_IM4_IRL0 + 2) +#define INT_NUM_IM4_IRL3 (INT_NUM_IM4_IRL0 + 3) +#define INT_NUM_IM4_IRL4 (INT_NUM_IM4_IRL0 + 4) +#define INT_NUM_IM4_IRL5 (INT_NUM_IM4_IRL0 + 5) +#define INT_NUM_IM4_IRL6 (INT_NUM_IM4_IRL0 + 6) +#define INT_NUM_IM4_IRL7 (INT_NUM_IM4_IRL0 + 7) +#define INT_NUM_IM4_IRL8 (INT_NUM_IM4_IRL0 + 8) +#define INT_NUM_IM4_IRL9 (INT_NUM_IM4_IRL0 + 9) +#define INT_NUM_IM4_IRL10 (INT_NUM_IM4_IRL0 + 10) +#define INT_NUM_IM4_IRL11 (INT_NUM_IM4_IRL0 + 11) +#define INT_NUM_IM4_IRL12 (INT_NUM_IM4_IRL0 + 12) +#define INT_NUM_IM4_IRL13 (INT_NUM_IM4_IRL0 + 13) +#define INT_NUM_IM4_IRL14 (INT_NUM_IM4_IRL0 + 14) +#define INT_NUM_IM4_IRL15 (INT_NUM_IM4_IRL0 + 15) +#define INT_NUM_IM4_IRL16 (INT_NUM_IM4_IRL0 + 16) +#define INT_NUM_IM4_IRL17 (INT_NUM_IM4_IRL0 + 17) +#define INT_NUM_IM4_IRL18 (INT_NUM_IM4_IRL0 + 18) +#define INT_NUM_IM4_IRL19 (INT_NUM_IM4_IRL0 + 19) +#define INT_NUM_IM4_IRL20 (INT_NUM_IM4_IRL0 + 20) +#define INT_NUM_IM4_IRL21 (INT_NUM_IM4_IRL0 + 21) +#define INT_NUM_IM4_IRL22 (INT_NUM_IM4_IRL0 + 22) +#define INT_NUM_IM4_IRL23 (INT_NUM_IM4_IRL0 + 23) +#define INT_NUM_IM4_IRL24 (INT_NUM_IM4_IRL0 + 24) +#define INT_NUM_IM4_IRL25 (INT_NUM_IM4_IRL0 + 25) +#define INT_NUM_IM4_IRL26 (INT_NUM_IM4_IRL0 + 26) +#define INT_NUM_IM4_IRL27 (INT_NUM_IM4_IRL0 + 27) +#define INT_NUM_IM4_IRL28 (INT_NUM_IM4_IRL0 + 28) +#define INT_NUM_IM4_IRL29 (INT_NUM_IM4_IRL0 + 29) +#define INT_NUM_IM4_IRL30 (INT_NUM_IM4_IRL0 + 30) +#define INT_NUM_IM4_IRL31 (INT_NUM_IM4_IRL0 + 31) + +/****** Interrupt Assigments ***********/ +#define AMAZON_DMA_INT INT_NUM_IM0_IRL0 +#define IFX_SSC_TIR INT_NUM_IM0_IRL29 +#define IFX_SSC_RIR INT_NUM_IM0_IRL30 +#define IFX_SSC_EIR INT_NUM_IM0_IRL31 + +#define AMAZON_MEI_INT INT_NUM_IM2_IRL8 + +#define AMAZONASC_TIR INT_NUM_IM4_IRL15/* TX interrupt */ +#define AMAZONASC_RIR INT_NUM_IM4_IRL16/* RX interrupt */ +#define AMAZONASC_EIR INT_NUM_IM4_IRL17/* ERROR interrupt */ + +#define AMAZON_TIMER6_INT INT_NUM_IM1_IRL23 + +#define AMAZON_SWIE_INT INT_NUM_IM3_IRL8 +#define AMAZON_CBM_INT INT_NUM_IM3_IRL9 +#define AMAZON_AAL5_INT INT_NUM_IM3_IRL10 +#define AMAZON_HTU_INT INT_NUM_IM3_IRL11 +#define AMAZON_QSB_INT INT_NUM_IM3_IRL12 +#define MIPS_CPU_TIMER_IRQ 7 +#endif /* __AMAZON_IRQ */ diff --git a/target/linux/amazon/files/include/asm-mips/amazon/model.h b/target/linux/amazon/files/include/asm-mips/amazon/model.h new file mode 100644 index 0000000000..4e43ab5f19 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/model.h @@ -0,0 +1,29 @@ +#ifndef AMAZON_MODEL_H +#define AMAZON_MODEL_H +/****************************************************************************** + Copyright (c) 2002, Infineon Technologies. All rights reserved. + + No Warranty + Because the program is licensed free of charge, there is no warranty for + the program, to the extent permitted by applicable law. Except when + otherwise stated in writing the copyright holders and/or other parties + provide the program "as is" without warranty of any kind, either + expressed or implied, including, but not limited to, the implied + warranties of merchantability and fitness for a particular purpose. The + entire risk as to the quality and performance of the program is with + you. should the program prove defective, you assume the cost of all + necessary servicing, repair or correction. + + In no event unless required by applicable law or agreed to in writing + will any copyright holder, or any other party who may modify and/or + redistribute the program as permitted above, be liable to you for + damages, including any general, special, incidental or consequential + damages arising out of the use or inability to use the program + (including but not limited to loss of data or data being rendered + inaccurate or losses sustained by you or third parties or a failure of + the program to operate with any other programs), even if such holder or + other party has been advised of the possibility of such damages. +******************************************************************************/ +#define BOARD_SYSTEM_TYPE "AMAZON" +#define SYSTEM_MODEL_NAME "Amazon Gateway Package 3.2 Version" +#endif diff --git a/target/linux/amazon/files/include/asm-mips/amazon/port.h b/target/linux/amazon/files/include/asm-mips/amazon/port.h new file mode 100644 index 0000000000..21825794c5 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/port.h @@ -0,0 +1,72 @@ +/* + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * port.h + * + * Global Amazon port driver header file + * + */ + +/* Modification history */ +/* 21Jun2004 btxu Generate from Inca_IP project */ + + +#ifndef PORT_H +#define PORT_H + +struct amazon_port_ioctl_parm { + int port; + int pin; + int value; +}; +#define AMAZON_PORT_IOC_MAGIC 0xbf +#define AMAZON_PORT_IOCOD _IOW( AMAZON_PORT_IOC_MAGIC,0,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCPUDSEL _IOW( AMAZON_PORT_IOC_MAGIC,1,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCPUDEN _IOW( AMAZON_PORT_IOC_MAGIC,2,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCSTOFF _IOW( AMAZON_PORT_IOC_MAGIC,3,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCDIR _IOW( AMAZON_PORT_IOC_MAGIC,4,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCOUTPUT _IOW( AMAZON_PORT_IOC_MAGIC,5,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCINPUT _IOWR(AMAZON_PORT_IOC_MAGIC,6,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCALTSEL0 _IOW( AMAZON_PORT_IOC_MAGIC,7,struct amazon_port_ioctl_parm) +#define AMAZON_PORT_IOCALTSEL1 _IOW( AMAZON_PORT_IOC_MAGIC,8,struct amazon_port_ioctl_parm) + +int amazon_port_reserve_pin(int port, int pin, int module_id); +int amazon_port_free_pin(int port, int pin, int module_id); +int amazon_port_set_open_drain(int port, int pin, int module_id); +int amazon_port_clear_open_drain(int port, int pin, int module_id); +int amazon_port_set_pudsel(int port, int pin, int module_id); +int amazon_port_clear_pudsel(int port, int pin, int module_id); +int amazon_port_set_puden(int port, int pin, int module_id); +int amazon_port_clear_puden(int port, int pin, int module_id); +int amazon_port_set_stoff(int port, int pin, int module_id); +int amazon_port_clear_stoff(int port, int pin, int module_id); +int amazon_port_set_dir_out(int port, int pin, int module_id); +int amazon_port_set_dir_in(int port, int pin, int module_id); +int amazon_port_set_output(int port, int pin, int module_id); +int amazon_port_clear_output(int port, int pin, int module_id); +int amazon_port_get_input(int port, int pin, int module_id); + +int amazon_port_set_altsel0(int port, int pin, int module_id); +int amazon_port_clear_altsel0(int port, int pin, int module_id); +int amazon_port_set_altsel1(int port, int pin, int module_id); +int amazon_port_clear_altsel1(int port, int pin, int module_id); + + +#endif /* PORT_H */ + + diff --git a/target/linux/amazon/files/include/asm-mips/amazon/serial.h b/target/linux/amazon/files/include/asm-mips/amazon/serial.h new file mode 100644 index 0000000000..3ff3efc28d --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/amazon/serial.h @@ -0,0 +1,146 @@ +/* incaAscSio.h - (AMAZON) ASC UART tty driver header */ + +#ifndef __AMAZON_ASC_H +#define __AMAZON_ASC_H + +/* channel operating modes */ +#define ASCOPT_CSIZE 0x00000003 +#define ASCOPT_CS7 0x00000001 +#define ASCOPT_CS8 0x00000002 +#define ASCOPT_PARENB 0x00000004 +#define ASCOPT_STOPB 0x00000008 +#define ASCOPT_PARODD 0x00000010 +#define ASCOPT_CREAD 0x00000020 + +#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8) + +/* ASC input select (0 or 1) */ +#define CONSOLE_TTY 0 + +/* use fractional divider for baudrate settings */ +#define AMAZONASC_USE_FDV + +#ifdef AMAZONASC_USE_FDV + #define AMAZONASC_FDV_LOW_BAUDRATE 71 +#ifdef CONFIG_USE_IKOS + #define AMAZONASC_FDV_HIGH_BAUDRATE 443 +#else + #define AMAZONASC_FDV_HIGH_BAUDRATE 498 +#endif //CONFIG_USE_IKOS +#endif /*AMAZONASC_USE_FDV*/ + + +#define AMAZONASC_TXFIFO_FL 1 +#define AMAZONASC_RXFIFO_FL 1 +#define AMAZONASC_TXFIFO_FULL 16 + +/* interrupt lines masks for the ASC device interrupts*/ +/* change these macroses if it's necessary */ +#define AMAZONASC_IRQ_LINE_ALL 0x000F0000 /* all IRQs */ + +#define AMAZONASC_IRQ_LINE_TIR 0x00010000 /* TIR - Tx */ +#define AMAZONASC_IRQ_LINE_RIR 0x00020000 /* RIR - Rx */ +#define AMAZONASC_IRQ_LINE_EIR 0x00040000 /* EIR - Err */ +#define AMAZONASC_IRQ_LINE_TBIR 0x00080000 /* TBIR - Tx Buf*/ + +/* CLC register's bits and bitfields */ +#define ASCCLC_DISR 0x00000001 +#define ASCCLC_DISS 0x00000002 +#define ASCCLC_RMCMASK 0x0000FF00 +#define ASCCLC_RMCOFFSET 8 + +/* CON register's bits and bitfields */ +#define ASCCON_MODEMASK 0x0007 + #define ASCCON_M_8SYNC 0x0 + #define ASCCON_M_8ASYNC 0x1 + #define ASCCON_M_8IRDAASYNC 0x2 + #define ASCCON_M_7ASYNCPAR 0x3 + #define ASCCON_M_9ASYNC 0x4 + #define ASCCON_M_8WAKEUPASYNC 0x5 + #define ASCCON_M_8ASYNCPAR 0x7 +#define ASCCON_STP 0x0008 +#define ASCCON_REN 0x0010 +#define ASCCON_PEN 0x0020 +#define ASCCON_FEN 0x0040 +#define ASCCON_OEN 0x0080 +#define ASCCON_PE 0x0100 +#define ASCCON_FE 0x0200 +#define ASCCON_OE 0x0400 +#define ASCCON_FDE 0x0800 +#define ASCCON_ODD 0x1000 +#define ASCCON_BRS 0x2000 +#define ASCCON_LB 0x4000 +#define ASCCON_R 0x8000 +#define ASCCON_ANY (ASCCON_PE|ASCCON_FE|ASCCON_OE) + +/* WHBCON register's bits and bitfields */ +#define ASCWHBCON_CLRREN 0x0010 +#define ASCWHBCON_SETREN 0x0020 +#define ASCWHBCON_CLRPE 0x0100 +#define ASCWHBCON_CLRFE 0x0200 +#define ASCWHBCON_CLROE 0x0400 +#define ASCWHBCON_SETPE 0x0800 +#define ASCWHBCON_SETFE 0x1000 +#define ASCWHBCON_SETOE 0x2000 + +/* ABCON register's bits and bitfields */ +#define ASCABCON_ABEN 0x0001 +#define ASCABCON_AUREN 0x0002 +#define ASCABCON_ABSTEN 0x0004 +#define ASCABCON_ABDETEN 0x0008 +#define ASCABCON_FCDETEN 0x0010 +#define ASCABCON_EMMASK 0x0300 + #define ASCABCON_EMOFF 8 + #define ASCABCON_EM_DISAB 0x0 + #define ASCABCON_EM_DURAB 0x1 + #define ASCABCON_EM_ALWAYS 0x2 +#define ASCABCON_TXINV 0x0400 +#define ASCABCON_RXINV 0x0800 + +/* FDV register mask, offset and bitfields*/ +#define ASCFDV_VALUE_MASK 0x000001FF + +/* WHBABCON register's bits and bitfields */ +#define ASCWHBABCON_SETABEN 0x0001 +#define ASCWHBABCON_CLRABEN 0x0002 + +/* ABSTAT register's bits and bitfields */ +#define ASCABSTAT_FCSDET 0x0001 +#define ASCABSTAT_FCCDET 0x0002 +#define ASCABSTAT_SCSDET 0x0004 +#define ASCABSTAT_SCCDET 0x0008 +#define ASCABSTAT_DETWAIT 0x0010 + +/* WHBABSTAT register's bits and bitfields */ +#define ASCWHBABSTAT_CLRFCSDET 0x0001 +#define ASCWHBABSTAT_SETFCSDET 0x0002 +#define ASCWHBABSTAT_CLRFCCDET 0x0004 +#define ASCWHBABSTAT_SETFCCDET 0x0008 +#define ASCWHBABSTAT_CLRSCSDET 0x0010 +#define ASCWHBABSTAT_SETSCSDET 0x0020 +#define ASCWHBABSTAT_SETSCCDET 0x0040 +#define ASCWHBABSTAT_CLRSCCDET 0x0080 +#define ASCWHBABSTAT_CLRDETWAIT 0x0100 +#define ASCWHBABSTAT_SETDETWAIT 0x0200 + +/* TXFCON register's bits and bitfields */ +#define ASCTXFCON_TXFEN 0x0001 +#define ASCTXFCON_TXFFLU 0x0002 +#define ASCTXFCON_TXTMEN 0x0004 +#define ASCTXFCON_TXFITLMASK 0x3F00 +#define ASCTXFCON_TXFITLOFF 8 + +/* RXFCON register's bits and bitfields */ +#define ASCRXFCON_RXFEN 0x0001 +#define ASCRXFCON_RXFFLU 0x0002 +#define ASCRXFCON_RXTMEN 0x0004 +#define ASCRXFCON_RXFITLMASK 0x3F00 +#define ASCRXFCON_RXFITLOFF 8 + +/* FSTAT register's bits and bitfields */ +#define ASCFSTAT_RXFFLMASK 0x003F +#define ASCFSTAT_TXFFLMASK 0x3F00 +#define ASCFSTAT_TXFFLOFF 8 + +#endif /* __AMAZON_ASC_H */ + diff --git a/target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h b/target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h new file mode 100644 index 0000000000..e72b7d5c11 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/mach-amazon/irq.h @@ -0,0 +1,7 @@ +#ifndef __AMAZON_IRQ_H +#define __AMAZON_IRQ_H + +#define NR_IRQS 256 +#include_next + +#endif diff --git a/target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h b/target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h new file mode 100644 index 0000000000..9aefebbe63 --- /dev/null +++ b/target/linux/amazon/files/include/asm-mips/mach-amazon/mangle-port.h @@ -0,0 +1,52 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003, 2004 Ralf Baechle + */ +#ifndef __ASM_MACH_GENERIC_MANGLE_PORT_H +#define __ASM_MACH_GENERIC_MANGLE_PORT_H + +#define __swizzle_addr_b(port) (port) +#define __swizzle_addr_w(port) ((port) ^ 2) +#define __swizzle_addr_l(port) (port) +#define __swizzle_addr_q(port) (port) + +/* + * Sane hardware offers swapping of PCI/ISA I/O space accesses in hardware; + * less sane hardware forces software to fiddle with this... + * + * Regardless, if the host bus endianness mismatches that of PCI/ISA, then + * you can't have the numerical value of data and byte addresses within + * multibyte quantities both preserved at the same time. Hence two + * variations of functions: non-prefixed ones that preserve the value + * and prefixed ones that preserve byte addresses. The latters are + * typically used for moving raw data between a peripheral and memory (cf. + * string I/O functions), hence the "__mem_" prefix. + */ +#if defined(CONFIG_SWAP_IO_SPACE) + +# define ioswabb(a,x) (x) +# define __mem_ioswabb(a,x) (x) +# define ioswabw(a,x) le16_to_cpu(x) +# define __mem_ioswabw(a,x) (x) +# define ioswabl(a,x) le32_to_cpu(x) +# define __mem_ioswabl(a,x) (x) +# define ioswabq(a,x) le64_to_cpu(x) +# define __mem_ioswabq(a,x) (x) + +#else + +# define ioswabb(a,x) (x) +# define __mem_ioswabb(a,x) (x) +# define ioswabw(a,x) (x) +# define __mem_ioswabw(a,x) cpu_to_le16(x) +# define ioswabl(a,x) (x) +# define __mem_ioswabl(a,x) cpu_to_le32(x) +# define ioswabq(a,x) (x) +# define __mem_ioswabq(a,x) cpu_to_le32(x) + +#endif + +#endif /* __ASM_MACH_GENERIC_MANGLE_PORT_H */ diff --git a/target/linux/amazon/image/Makefile b/target/linux/amazon/image/Makefile new file mode 100644 index 0000000000..29935f9241 --- /dev/null +++ b/target/linux/amazon/image/Makefile @@ -0,0 +1,30 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Image/BuildKernel + $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma + mkimage -A mips -O linux -T kernel -C lzma -a 0x80002000 -e \ + 0x80002000 \ + -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ + -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage + + cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage +endef + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image) +endef + +define Image/Build + cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image + $(call Image/Build/$(1),$(1)) +endef + + +$(eval $(call BuildImage)) diff --git a/target/linux/amazon/patches/017-wdt-driver.patch b/target/linux/amazon/patches/017-wdt-driver.patch new file mode 100644 index 0000000000..b915ebe515 --- /dev/null +++ b/target/linux/amazon/patches/017-wdt-driver.patch @@ -0,0 +1,10 @@ +--- linux-2.6.21.5/drivers/char/watchdog/Makefile.orig 2007-08-05 11:13:29.177013987 +0200 ++++ linux-2.6.21.5/drivers/char/watchdog/Makefile 2007-08-05 11:13:52.190325445 +0200 +@@ -74,6 +74,7 @@ + # MIPS Architecture + obj-$(CONFIG_INDYDOG) += indydog.o + obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o ++obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o + + # S390 Architecture + diff --git a/target/linux/amazon/patches/100-board.patch b/target/linux/amazon/patches/100-board.patch new file mode 100644 index 0000000000..9b29141239 --- /dev/null +++ b/target/linux/amazon/patches/100-board.patch @@ -0,0 +1,63 @@ +diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig +--- linux.old/arch/mips/Kconfig 2007-02-02 23:55:52.912446784 +0100 ++++ linux.dev/arch/mips/Kconfig 2007-02-03 21:50:25.262027104 +0100 +@@ -145,6 +145,17 @@ + note that a kernel built with this option selected will not be + able to run on normal units. + ++config AMAZON ++ bool "Amazon support (EXPERIMENTAL)" ++ depends on EXPERIMENTAL ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select HAVE_STD_PC_SERIAL_PORT ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_HAS_EARLY_PRINTK ++ + config MIPS_COBALT + bool "Cobalt Server" + select DMA_NONCOHERENT +@@ -766,6 +776,7 @@ + + endchoice + ++source "arch/mips/amazon/Kconfig" + source "arch/mips/ddb5xxx/Kconfig" + source "arch/mips/gt64120/ev64120/Kconfig" + source "arch/mips/jazz/Kconfig" +diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile +--- linux.old/arch/mips/Makefile 2007-02-02 23:55:52.913446632 +0100 ++++ linux.dev/arch/mips/Makefile 2007-02-03 17:40:29.193776000 +0100 +@@ -267,6 +267,13 @@ + load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000 + + # ++# Infineon AMAZON ++# ++core-$(CONFIG_AMAZON) += arch/mips/amazon/ ++cflags-$(CONFIG_AMAZON) += -Iinclude/asm-mips/mach-amazon ++load-$(CONFIG_AMAZON) += 0xffffffff80002000 ++ ++# + # Cobalt Server + # + core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ +diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h +--- linux.old/include/asm-mips/bootinfo.h 2007-02-02 23:55:52.913446632 +0100 ++++ linux.dev/include/asm-mips/bootinfo.h 2007-02-03 17:51:02.531494032 +0100 +@@ -212,6 +212,12 @@ + #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ + #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ + ++/* ++ * Valid machtype for group ATHEROS ++ */ ++#define MACH_GROUP_INFINEON 27 ++#define MACH_INFINEON_AMAZON 0 ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); + diff --git a/target/linux/amazon/patches/110-char_drivers.patch b/target/linux/amazon/patches/110-char_drivers.patch new file mode 100644 index 0000000000..73949646ff --- /dev/null +++ b/target/linux/amazon/patches/110-char_drivers.patch @@ -0,0 +1,12 @@ +Index: linux-2.6.21.5/drivers/char/Makefile +=================================================================== +--- linux-2.6.21.5.orig/drivers/char/Makefile 2007-06-24 07:44:10.606341712 +0200 ++++ linux-2.6.21.5/drivers/char/Makefile 2007-06-24 07:44:46.633864696 +0200 +@@ -103,6 +103,7 @@ + + obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o + obj-$(CONFIG_TCG_TPM) += tpm/ ++obj-$(CONFIG_AMAZONE_WDT) += amazone_wdt.o + + # Files generated that shall be removed upon make clean + clean-files := consolemap_deftbl.c defkeymap.c diff --git a/target/linux/amazon/patches/130-mtd_drivers.patch b/target/linux/amazon/patches/130-mtd_drivers.patch new file mode 100644 index 0000000000..31f81640d9 --- /dev/null +++ b/target/linux/amazon/patches/130-mtd_drivers.patch @@ -0,0 +1,9 @@ +Index: linux-2.6.21.5/drivers/mtd/maps/Makefile +=================================================================== +--- linux-2.6.21.5.orig/drivers/mtd/maps/Makefile 2007-06-24 07:55:22.138253344 +0200 ++++ linux-2.6.21.5/drivers/mtd/maps/Makefile 2007-06-24 07:56:58.207648576 +0200 +@@ -72,3 +72,4 @@ + obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o + obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o + obj-$(CONFIG_MTD_TQM834x) += tqm834x.o ++obj-$(CONFIG_AMAZON_MTD) += amazon.o diff --git a/target/linux/amazon/patches/140-net_drivers.patch b/target/linux/amazon/patches/140-net_drivers.patch new file mode 100644 index 0000000000..65a0e446ed --- /dev/null +++ b/target/linux/amazon/patches/140-net_drivers.patch @@ -0,0 +1,10 @@ +Index: linux-2.6.21.5/drivers/net/Makefile +=================================================================== +--- linux-2.6.21.5.orig/drivers/net/Makefile 2007-06-24 09:03:20.308277264 +0200 ++++ linux-2.6.21.5/drivers/net/Makefile 2007-06-24 09:05:13.560060376 +0200 +@@ -219,3 +219,5 @@ + obj-$(CONFIG_FS_ENET) += fs_enet/ + + obj-$(CONFIG_NETXEN_NIC) += netxen/ ++ ++obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o diff --git a/target/linux/amazon/patches/150-serial_driver.patch b/target/linux/amazon/patches/150-serial_driver.patch new file mode 100644 index 0000000000..802c5c2a53 --- /dev/null +++ b/target/linux/amazon/patches/150-serial_driver.patch @@ -0,0 +1,12 @@ +Index: linux-2.6.21.5/drivers/serial/Makefile +=================================================================== +--- linux-2.6.21.5.orig/drivers/serial/Makefile 2007-06-24 10:51:45.005412992 +0200 ++++ linux-2.6.21.5/drivers/serial/Makefile 2007-06-24 10:51:54.885910928 +0200 +@@ -5,6 +5,7 @@ + # + + obj-$(CONFIG_SERIAL_CORE) += serial_core.o ++obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o + obj-$(CONFIG_SERIAL_21285) += 21285.o + obj-$(CONFIG_SERIAL_8250) += 8250.o + obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o diff --git a/target/linux/amazon/patches/160-cfi-swap.patch b/target/linux/amazon/patches/160-cfi-swap.patch new file mode 100644 index 0000000000..9e20f0560c --- /dev/null +++ b/target/linux/amazon/patches/160-cfi-swap.patch @@ -0,0 +1,14 @@ +--- linux-2.6.21.5/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-23 23:15:50.403369508 +0200 ++++ linux-2.6.21.5.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-23 23:26:43.028560499 +0200 +@@ -1007,7 +1007,9 @@ + int ret = 0; + map_word oldd; + int retry_cnt = 0; +- ++#ifdef CONFIG_AMAZON ++ adr ^= 2; ++#endif + adr += chip->start; + + spin_lock(chip->mutex); + diff --git a/target/linux/amcc-2.6/Makefile b/target/linux/amcc-2.6/Makefile deleted file mode 100644 index 4dd366caa9..0000000000 --- a/target/linux/amcc-2.6/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# -# Copyright (C) 2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=powerpc -BOARD:=amcc -BOARDNAME:=AMCC Taishan -FEATURES:=jffs2 - -LINUX_VERSION:=2.6.21.5 - -define Target/Description - Build firmware images for the AMCC Taishan evaluation board -endef - -include $(INCLUDE_DIR)/kernel-build.mk - -# include the profiles --include profiles/*.mk - -$(eval $(call BuildKernel)) diff --git a/target/linux/amcc-2.6/base-files/default/etc/inittab b/target/linux/amcc-2.6/base-files/default/etc/inittab deleted file mode 100644 index 859dc530ce..0000000000 --- a/target/linux/amcc-2.6/base-files/default/etc/inittab +++ /dev/null @@ -1,5 +0,0 @@ -::sysinit:/etc/init.d/rcS S boot -::shutdown:/etc/init.d/rcS K stop -tts/0::askfirst:/bin/ash --login -ttyS1::askfirst:/bin/ash --login -tty1::askfirst:/bin/ash --login diff --git a/target/linux/amcc-2.6/config/default b/target/linux/amcc-2.6/config/default deleted file mode 100644 index d0fccac52d..0000000000 --- a/target/linux/amcc-2.6/config/default +++ /dev/null @@ -1,172 +0,0 @@ -# CONFIG_40x is not set -CONFIG_44x=y -CONFIG_4xx=y -# CONFIG_6xx is not set -# CONFIG_8139TOO is not set -# CONFIG_8xx is not set -# CONFIG_ATM_DRIVERS is not set -# CONFIG_BAMBOO is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -# CONFIG_EBONY is not set -# CONFIG_LUAN is not set -# CONFIG_YUCCA is not set -# CONFIG_OCOTEA is not set -CONFIG_TAISHAN=y -CONFIG_440GX=y -CONFIG_440A=y -CONFIG_PTE_64BIT=y -CONFIG_PHYS_64BIT=y -# CONFIG_ADVANCED_OPTIONS is not set -# CONFIG_AGP is not set -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -# CONFIG_B44 is not set -CONFIG_BASE_SMALL=0 -CONFIG_BIOS_FIXUP=y -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BOOKE_WDT is not set -CONFIG_BOOT_LOAD=0x01000000 -# CONFIG_BT is not set -# CONFIG_BUBINGA is not set -CONFIG_CMDLINE="console=ttyS1,115200 init=/etc/preinit" -CONFIG_CMDLINE_BOOL=y -CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_CONSISTENT_START=0xff100000 -# CONFIG_CPCI405 is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -# CONFIG_EP405 is not set -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_NVRAM=y -# CONFIG_GEN_RTC is not set -# CONFIG_HIGHMEM is not set -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -CONFIG_IBM_EMAC=y -# CONFIG_IBM_EMAC_DEBUG is not set -CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y -CONFIG_IBM_EMAC_POLL_WEIGHT=32 -CONFIG_IBM_EMAC_RXB=128 -CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 -CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 -CONFIG_IBM_EMAC_TXB=128 -CONFIG_IBM_OCP=y -# CONFIG_IDE is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_ISA_DMA_API=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_KERNEL_START=0xc0000000 -# CONFIG_KEXEC is not set -CONFIG_LOWMEM_SIZE=0x30000000 -# CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_MATH_EMULATION=y -CONFIG_MINI_FO=y -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_GEOMETRY is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_ONENAND is not set -# CONFIG_MTD_OTP is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_NET_VENDOR_3COM is not set -CONFIG_NETDEV_1000=y -CONFIG_NOT_COHERENT_CACHE=y -# CONFIG_NVRAM is not set -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PCI_DOMAINS=y -# CONFIG_PCMCIA_ATMEL is not set -# CONFIG_PC_KEYBOARD is not set -# CONFIG_PM is not set -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_PPC4xx_DMA=y -CONFIG_PPC4xx_EDMA=y -CONFIG_PPC_GEN550=y -# CONFIG_PPC_I8259 is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PPC_OCP=y -# CONFIG_REDWOOD_5 is not set -# CONFIG_REDWOOD_6 is not set -CONFIG_RESOURCES_64BIT=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SECCOMP is not set -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_RSA is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SOUND is not set -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SYCAMORE is not set -CONFIG_TASK_SIZE=0x80000000 -CONFIG_UART0_TTYS0=y -# CONFIG_UART0_TTYS1 is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB is not set -# CONFIG_VIA_RHINE is not set -CONFIG_WANT_EARLY_SERIAL=y -# CONFIG_WINDFARM is not set -# CONFIG_XILINX_ML300 is not set -# CONFIG_XILINX_ML403 is not set diff --git a/target/linux/amcc-2.6/image/Makefile b/target/linux/amcc-2.6/image/Makefile deleted file mode 100644 index 09ff061dba..0000000000 --- a/target/linux/amcc-2.6/image/Makefile +++ /dev/null @@ -1,39 +0,0 @@ -# -# Copyright (C) 2007 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -JFFS2_BLOCKSIZE=256k - -define Image/Prepare - cp $(LINUX_DIR)/arch/ppc/boot/images/uImage $(KDIR)/uImage -endef - -define Image/BuildKernel - cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage -endef - -define Image/Build - $(call Image/Build/$(1),$(1)) -endef - -define Image/Build/jffs2-256k - ( \ - dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=4096k conv=sync; \ - dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \ - ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-jffs2.img -endef - -define Image/Build/squashfs - $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) - ( \ - dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=4096k conv=sync; \ - dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \ - ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/amcc-2.6/patches/100-taishan_emac.patch b/target/linux/amcc-2.6/patches/100-taishan_emac.patch deleted file mode 100644 index fde73b77b6..0000000000 --- a/target/linux/amcc-2.6/patches/100-taishan_emac.patch +++ /dev/null @@ -1,71 +0,0 @@ -diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c ---- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c 2007-05-28 16:27:15.000000000 +0200 -@@ -299,11 +299,50 @@ - .ops = &cis8201_phy_ops - }; - -+#if defined(CONFIG_TAISHAN) -+static int et1011c_init(struct mii_phy *phy) -+{ -+ u16 reg_short; -+ -+ reg_short = (u16)(phy_read(phy,0x16)); -+ reg_short &= ~(0x7); -+ reg_short |= 0x6; /* RGMII Trace Delay*/ -+ phy_write(phy, 0x16, reg_short); -+ -+ reg_short = (u16)(phy_read(phy, 0x17)); -+ reg_short &= ~(0x40); -+ phy_write(phy, 0x17, reg_short); -+ -+ phy_write(phy,0x1c,0x74f0); -+ return 0; -+} -+ -+static struct mii_phy_ops et1011c_phy_ops = { -+ .init = et1011c_init, -+ .setup_aneg = genmii_setup_aneg, -+ .setup_forced = genmii_setup_forced, -+ .poll_link = genmii_poll_link, -+ .read_link = genmii_read_link -+}; -+ -+static struct mii_phy_def et1011c_phy_def = { -+ .phy_id = 0x0282f000, -+ .phy_id_mask = 0x0fffff00, -+ .name = "ET1011C Gigabit Ethernet", -+ .ops = &et1011c_phy_ops -+}; -+ -+static struct mii_phy_def *mii_phy_table[] = { -+ &et1011c_phy_def, -+ NULL -+}; -+#else - static struct mii_phy_def *mii_phy_table[] = { - &cis8201_phy_def, - &genmii_phy_def, - NULL - }; -+#endif - - int mii_phy_probe(struct mii_phy *phy, int address) - { -diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c ---- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-05-28 16:26:48.000000000 +0200 -@@ -170,6 +170,13 @@ - struct ocp_func_emac_data *emacdata = dev->def->additions; - - if (emacdata->zmii_idx >= 0) { -+#if defined(CONFIG_TAISHAN) -+ /* don't attach emac0 and emac1 */ -+ if( dev->def->index < 2 ) -+ { -+ return -ENODEV; -+ } -+#endif - dev->zmii_input = emacdata->zmii_mux; - dev->zmii_dev = - ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII, diff --git a/target/linux/amcc-2.6/patches/110-openwrt_mtd_mapping.patch b/target/linux/amcc-2.6/patches/110-openwrt_mtd_mapping.patch deleted file mode 100644 index 7d07fa9256..0000000000 --- a/target/linux/amcc-2.6/patches/110-openwrt_mtd_mapping.patch +++ /dev/null @@ -1,29 +0,0 @@ -diff -Nur linux-2.6.21/arch/ppc/platforms/4xx/taishan.c linux-2.6.21-owrt/arch/ppc/platforms/4xx/taishan.c ---- linux-2.6.21/arch/ppc/platforms/4xx/taishan.c 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21-owrt/arch/ppc/platforms/4xx/taishan.c 2007-05-28 17:21:46.000000000 +0200 -@@ -60,8 +60,8 @@ - }; - - #define RW_PART0_OF 0 --#define RW_PART0_SZ 0x180000 --#define RW_PART1_SZ 0x200000 -+#define RW_PART0_SZ 0x400000 -+#define RW_PART1_SZ 0x3a00000 - /* Partition 2 will be autosized dynamically... */ - #define RW_PART3_SZ 0x80000 - #define RW_PART4_SZ 0x40000 -@@ -73,12 +73,12 @@ - .size = RW_PART0_SZ - }, - { -- .name = "root", -+ .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = RW_PART1_SZ, - }, - { -- .name = "user", -+ .name = "diagnostics", - .offset = MTDPART_OFS_APPEND, - /* .size = RW_PART2_SZ */ /* will be adjusted dynamically */ - }, diff --git a/target/linux/amcc-2.6/patches/120-uncompressed_uImage.patch b/target/linux/amcc-2.6/patches/120-uncompressed_uImage.patch deleted file mode 100644 index b1f2707834..0000000000 --- a/target/linux/amcc-2.6/patches/120-uncompressed_uImage.patch +++ /dev/null @@ -1,17 +0,0 @@ -diff -Nur linux-2.6.21/arch/ppc/boot/images/Makefile linux-2.6.21-owrt/arch/ppc/boot/images/Makefile ---- linux-2.6.21/arch/ppc/boot/images/Makefile 2007-04-27 23:49:26.000000000 +0200 -+++ linux-2.6.21-owrt/arch/ppc/boot/images/Makefile 2007-05-28 17:44:11.000000000 +0200 -@@ -20,11 +20,11 @@ - - quiet_cmd_uimage = UIMAGE $@ - cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ -- -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ -+ -C none -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ - -d $< $@ - - targets += uImage --$(obj)/uImage: $(obj)/vmlinux.gz -+$(obj)/uImage: $(obj)/vmlinux.bin - $(Q)rm -f $@ - $(call cmd,uimage) - @echo -n ' Image: $@ ' diff --git a/target/linux/amcc/Makefile b/target/linux/amcc/Makefile new file mode 100644 index 0000000000..4dd366caa9 --- /dev/null +++ b/target/linux/amcc/Makefile @@ -0,0 +1,25 @@ +# +# Copyright (C) 2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=powerpc +BOARD:=amcc +BOARDNAME:=AMCC Taishan +FEATURES:=jffs2 + +LINUX_VERSION:=2.6.21.5 + +define Target/Description + Build firmware images for the AMCC Taishan evaluation board +endef + +include $(INCLUDE_DIR)/kernel-build.mk + +# include the profiles +-include profiles/*.mk + +$(eval $(call BuildKernel)) diff --git a/target/linux/amcc/base-files/default/etc/inittab b/target/linux/amcc/base-files/default/etc/inittab new file mode 100644 index 0000000000..859dc530ce --- /dev/null +++ b/target/linux/amcc/base-files/default/etc/inittab @@ -0,0 +1,5 @@ +::sysinit:/etc/init.d/rcS S boot +::shutdown:/etc/init.d/rcS K stop +tts/0::askfirst:/bin/ash --login +ttyS1::askfirst:/bin/ash --login +tty1::askfirst:/bin/ash --login diff --git a/target/linux/amcc/config/default b/target/linux/amcc/config/default new file mode 100644 index 0000000000..d0fccac52d --- /dev/null +++ b/target/linux/amcc/config/default @@ -0,0 +1,172 @@ +# CONFIG_40x is not set +CONFIG_44x=y +CONFIG_4xx=y +# CONFIG_6xx is not set +# CONFIG_8139TOO is not set +# CONFIG_8xx is not set +# CONFIG_ATM_DRIVERS is not set +# CONFIG_BAMBOO is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +# CONFIG_EBONY is not set +# CONFIG_LUAN is not set +# CONFIG_YUCCA is not set +# CONFIG_OCOTEA is not set +CONFIG_TAISHAN=y +CONFIG_440GX=y +CONFIG_440A=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_ADVANCED_OPTIONS is not set +# CONFIG_AGP is not set +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +# CONFIG_B44 is not set +CONFIG_BASE_SMALL=0 +CONFIG_BIOS_FIXUP=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BOOKE_WDT is not set +CONFIG_BOOT_LOAD=0x01000000 +# CONFIG_BT is not set +# CONFIG_BUBINGA is not set +CONFIG_CMDLINE="console=ttyS1,115200 init=/etc/preinit" +CONFIG_CMDLINE_BOOL=y +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_CONSISTENT_START=0xff100000 +# CONFIG_CPCI405 is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_E200 is not set +# CONFIG_E500 is not set +# CONFIG_EP405 is not set +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_NVRAM=y +# CONFIG_GEN_RTC is not set +# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_I2C is not set +CONFIG_IBM_EMAC=y +# CONFIG_IBM_EMAC_DEBUG is not set +CONFIG_IBM_EMAC_PHY_RX_CLK_FIX=y +CONFIG_IBM_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_EMAC_RXB=128 +CONFIG_IBM_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_EMAC_RX_SKB_HEADROOM=0 +CONFIG_IBM_EMAC_TXB=128 +CONFIG_IBM_OCP=y +# CONFIG_IDE is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_ISA_DMA_API=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_KERNEL_START=0xc0000000 +# CONFIG_KEXEC is not set +CONFIG_LOWMEM_SIZE=0x30000000 +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_MATH_EMULATION=y +CONFIG_MINI_FO=y +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_GEOMETRY is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_NETDEV_1000=y +CONFIG_NOT_COHERENT_CACHE=y +# CONFIG_NVRAM is not set +# CONFIG_PCIPCWATCHDOG is not set +CONFIG_PCI_DOMAINS=y +# CONFIG_PCMCIA_ATMEL is not set +# CONFIG_PC_KEYBOARD is not set +# CONFIG_PM is not set +CONFIG_PPC=y +CONFIG_PPC32=y +CONFIG_PPC4xx_DMA=y +CONFIG_PPC4xx_EDMA=y +CONFIG_PPC_GEN550=y +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PPC_OCP=y +# CONFIG_REDWOOD_5 is not set +# CONFIG_REDWOOD_6 is not set +CONFIG_RESOURCES_64BIT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SECCOMP is not set +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SOUND is not set +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SYCAMORE is not set +CONFIG_TASK_SIZE=0x80000000 +CONFIG_UART0_TTYS0=y +# CONFIG_UART0_TTYS1 is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_USB is not set +# CONFIG_VIA_RHINE is not set +CONFIG_WANT_EARLY_SERIAL=y +# CONFIG_WINDFARM is not set +# CONFIG_XILINX_ML300 is not set +# CONFIG_XILINX_ML403 is not set diff --git a/target/linux/amcc/image/Makefile b/target/linux/amcc/image/Makefile new file mode 100644 index 0000000000..09ff061dba --- /dev/null +++ b/target/linux/amcc/image/Makefile @@ -0,0 +1,39 @@ +# +# Copyright (C) 2007 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +JFFS2_BLOCKSIZE=256k + +define Image/Prepare + cp $(LINUX_DIR)/arch/ppc/boot/images/uImage $(KDIR)/uImage +endef + +define Image/BuildKernel + cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage +endef + +define Image/Build + $(call Image/Build/$(1),$(1)) +endef + +define Image/Build/jffs2-256k + ( \ + dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=4096k conv=sync; \ + dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \ + ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-jffs2.img +endef + +define Image/Build/squashfs + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) + ( \ + dd if=$(LINUX_DIR)/arch/ppc/boot/images/uImage bs=4096k conv=sync; \ + dd if=$(KDIR)/root.$(1) bs=256k conv=sync; \ + ) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/amcc/patches/100-taishan_emac.patch b/target/linux/amcc/patches/100-taishan_emac.patch new file mode 100644 index 0000000000..fde73b77b6 --- /dev/null +++ b/target/linux/amcc/patches/100-taishan_emac.patch @@ -0,0 +1,71 @@ +diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c +--- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_phy.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_phy.c 2007-05-28 16:27:15.000000000 +0200 +@@ -299,11 +299,50 @@ + .ops = &cis8201_phy_ops + }; + ++#if defined(CONFIG_TAISHAN) ++static int et1011c_init(struct mii_phy *phy) ++{ ++ u16 reg_short; ++ ++ reg_short = (u16)(phy_read(phy,0x16)); ++ reg_short &= ~(0x7); ++ reg_short |= 0x6; /* RGMII Trace Delay*/ ++ phy_write(phy, 0x16, reg_short); ++ ++ reg_short = (u16)(phy_read(phy, 0x17)); ++ reg_short &= ~(0x40); ++ phy_write(phy, 0x17, reg_short); ++ ++ phy_write(phy,0x1c,0x74f0); ++ return 0; ++} ++ ++static struct mii_phy_ops et1011c_phy_ops = { ++ .init = et1011c_init, ++ .setup_aneg = genmii_setup_aneg, ++ .setup_forced = genmii_setup_forced, ++ .poll_link = genmii_poll_link, ++ .read_link = genmii_read_link ++}; ++ ++static struct mii_phy_def et1011c_phy_def = { ++ .phy_id = 0x0282f000, ++ .phy_id_mask = 0x0fffff00, ++ .name = "ET1011C Gigabit Ethernet", ++ .ops = &et1011c_phy_ops ++}; ++ ++static struct mii_phy_def *mii_phy_table[] = { ++ &et1011c_phy_def, ++ NULL ++}; ++#else + static struct mii_phy_def *mii_phy_table[] = { + &cis8201_phy_def, + &genmii_phy_def, + NULL + }; ++#endif + + int mii_phy_probe(struct mii_phy *phy, int address) + { +diff -Nur linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c +--- linux-2.6.21/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21-owrt/drivers/net/ibm_emac/ibm_emac_zmii.c 2007-05-28 16:26:48.000000000 +0200 +@@ -170,6 +170,13 @@ + struct ocp_func_emac_data *emacdata = dev->def->additions; + + if (emacdata->zmii_idx >= 0) { ++#if defined(CONFIG_TAISHAN) ++ /* don't attach emac0 and emac1 */ ++ if( dev->def->index < 2 ) ++ { ++ return -ENODEV; ++ } ++#endif + dev->zmii_input = emacdata->zmii_mux; + dev->zmii_dev = + ocp_find_device(OCP_VENDOR_IBM, OCP_FUNC_ZMII, diff --git a/target/linux/amcc/patches/110-openwrt_mtd_mapping.patch b/target/linux/amcc/patches/110-openwrt_mtd_mapping.patch new file mode 100644 index 0000000000..7d07fa9256 --- /dev/null +++ b/target/linux/amcc/patches/110-openwrt_mtd_mapping.patch @@ -0,0 +1,29 @@ +diff -Nur linux-2.6.21/arch/ppc/platforms/4xx/taishan.c linux-2.6.21-owrt/arch/ppc/platforms/4xx/taishan.c +--- linux-2.6.21/arch/ppc/platforms/4xx/taishan.c 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21-owrt/arch/ppc/platforms/4xx/taishan.c 2007-05-28 17:21:46.000000000 +0200 +@@ -60,8 +60,8 @@ + }; + + #define RW_PART0_OF 0 +-#define RW_PART0_SZ 0x180000 +-#define RW_PART1_SZ 0x200000 ++#define RW_PART0_SZ 0x400000 ++#define RW_PART1_SZ 0x3a00000 + /* Partition 2 will be autosized dynamically... */ + #define RW_PART3_SZ 0x80000 + #define RW_PART4_SZ 0x40000 +@@ -73,12 +73,12 @@ + .size = RW_PART0_SZ + }, + { +- .name = "root", ++ .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = RW_PART1_SZ, + }, + { +- .name = "user", ++ .name = "diagnostics", + .offset = MTDPART_OFS_APPEND, + /* .size = RW_PART2_SZ */ /* will be adjusted dynamically */ + }, diff --git a/target/linux/amcc/patches/120-uncompressed_uImage.patch b/target/linux/amcc/patches/120-uncompressed_uImage.patch new file mode 100644 index 0000000000..b1f2707834 --- /dev/null +++ b/target/linux/amcc/patches/120-uncompressed_uImage.patch @@ -0,0 +1,17 @@ +diff -Nur linux-2.6.21/arch/ppc/boot/images/Makefile linux-2.6.21-owrt/arch/ppc/boot/images/Makefile +--- linux-2.6.21/arch/ppc/boot/images/Makefile 2007-04-27 23:49:26.000000000 +0200 ++++ linux-2.6.21-owrt/arch/ppc/boot/images/Makefile 2007-05-28 17:44:11.000000000 +0200 +@@ -20,11 +20,11 @@ + + quiet_cmd_uimage = UIMAGE $@ + cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A ppc -O linux -T kernel \ +- -C gzip -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ ++ -C none -a 00000000 -e 00000000 -n 'Linux-$(KERNELRELEASE)' \ + -d $< $@ + + targets += uImage +-$(obj)/uImage: $(obj)/vmlinux.gz ++$(obj)/uImage: $(obj)/vmlinux.bin + $(Q)rm -f $@ + $(call cmd,uimage) + @echo -n ' Image: $@ ' diff --git a/target/linux/ar7-2.6/Makefile b/target/linux/ar7-2.6/Makefile deleted file mode 100644 index 0beb8ae75d..0000000000 --- a/target/linux/ar7-2.6/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=mipsel -BOARD:=ar7 -BOARDNAME:=TI AR7 -FEATURES:=squashfs jffs2 atm - -LINUX_VERSION:=2.6.22.4 - -define Target/Description - Build firmware images for TI AR7 based routers -endef - -include $(INCLUDE_DIR)/kernel-build.mk - --include profiles/*.mk - -$(eval $(call BuildKernel)) diff --git a/target/linux/ar7-2.6/base-files.mk b/target/linux/ar7-2.6/base-files.mk deleted file mode 100644 index f21a604b83..0000000000 --- a/target/linux/ar7-2.6/base-files.mk +++ /dev/null @@ -1,11 +0,0 @@ -define Build/Compile - $(call Build/Compile/Default) - $(TARGET_CC) -o $(PKG_BUILD_DIR)/adam2patcher $(PLATFORM_DIR)/src/adam2patcher.c -endef - -define Package/base-files/install-target - mkdir -p $(1)/sbin - $(CP) $(PKG_BUILD_DIR)/adam2patcher $(1)/sbin -endef - - diff --git a/target/linux/ar7-2.6/base-files/default/etc/config/network b/target/linux/ar7-2.6/base-files/default/etc/config/network deleted file mode 100644 index 5fa112cc6e..0000000000 --- a/target/linux/ar7-2.6/base-files/default/etc/config/network +++ /dev/null @@ -1,41 +0,0 @@ -# Copyright (C) 2006 OpenWrt.org - -config interface loopback - option ifname lo - option proto static - option ipaddr 127.0.0.1 - option netmask 255.0.0.0 - -config interface lan - option ifname eth0 - option proto static - option ipaddr 192.168.1.1 - option netmask 255.255.255.0 - - - -## Example for ATM bridging. -## Useful for PPPoE or IP over ATM. Will create 'nas${unit}' -# -# config atm-bridge -# option unit 0 -# option encaps llc -# option vpi 8 -# option vci 35 - - -# config interface wan -## PPPoE: -# option ifname nas0 -# option proto pppoe - -## PPPoA: -# option ifname atm0 -# option proto pppoa -# option encaps llc -# option vpi 8 -# option vci 35 - -## Both: -# option username "my_username" -# option password "my_password" diff --git a/target/linux/ar7-2.6/base-files/default/etc/diag.sh b/target/linux/ar7-2.6/base-files/default/etc/diag.sh deleted file mode 100644 index 22acc71abf..0000000000 --- a/target/linux/ar7-2.6/base-files/default/etc/diag.sh +++ /dev/null @@ -1,19 +0,0 @@ -#!/bin/sh -# Copyright (C) 2007 OpenWrt.org - -set_led() { - local led="$1" - local state="$2" - [ -d "/sys/class/leds/ar7:$led" ] && echo "$state" > "/sys/class/leds/ar7:$led/brightness" -} - -set_state() { - case "$1" in - preinit) - set_led status 1 - ;; - done) - set_led status 0 - ;; - esac -} diff --git a/target/linux/ar7-2.6/base-files/default/etc/init.d/adam2 b/target/linux/ar7-2.6/base-files/default/etc/init.d/adam2 deleted file mode 100755 index 6b786270ea..0000000000 --- a/target/linux/ar7-2.6/base-files/default/etc/init.d/adam2 +++ /dev/null @@ -1,13 +0,0 @@ -#!/bin/sh /etc/rc.common -# ADAM2 patcher for Netgear DG834 and compatible -# Copyright (C) 2006 OpenWrt.org - -START=00 -start() { - MD5="$(md5sum /dev/mtdblock0 | awk '{print $1}')" - [ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && { - mtd unlock adam2 - /sbin/adam2patcher /dev/mtdblock0 - } - rm -f /etc/rc.d/S${START}adam2 /etc/init.d/adam2 /sbin/adam2patcher >&- 2>&- -} diff --git a/target/linux/ar7-2.6/config/default b/target/linux/ar7-2.6/config/default deleted file mode 100644 index 605140a99a..0000000000 --- a/target/linux/ar7-2.6/config/default +++ /dev/null @@ -1,199 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_AR7=y -CONFIG_AR7_GPIO=y -# CONFIG_AR7_WDT is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_ATMEL is not set -CONFIG_ATM_DRIVERS=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM43XX is not set -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_BOOT_ELF32=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BT is not set -CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2," -CONFIG_CPMAC=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_DDB5477 is not set -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_MII_100_FDX=y -# CONFIG_FIXED_MII_10_FDX is not set -CONFIG_FIXED_PHY=y -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -# CONFIG_GEN_RTC is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -# CONFIG_HERMES is not set -# CONFIG_HOSTAP_PCI is not set -# CONFIG_HOSTAP_PLX is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_IRQ_CPU=y -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_LEDS_AR7=y -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MIPS_EV64120 is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_AR7_PARTS=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_START=0x10000000 -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NET_PCI is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PCIPCWATCHDOG is not set -CONFIG_PHYLIB=y -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNPACPI is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PRISM54 is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250_EXTENDED is not set -CONFIG_SERIAL_8250_PCI=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SWAP_IO_SPACE=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_KGDB=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB is not set -# CONFIG_VGASTATE is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/Makefile b/target/linux/ar7-2.6/files/arch/mips/ar7/Makefile deleted file mode 100644 index 3ec49ee0d4..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/Makefile +++ /dev/null @@ -1,16 +0,0 @@ - -obj-y := \ - prom.o \ - setup.o \ - memory.o \ - irq.o \ - time.o \ - platform.o \ - gpio.o \ - clock.o \ - vlynq.o - -obj-$(CONFIG_PCI) += \ - vlynq-pci.o - -EXTRA_AFLAGS := $(CFLAGS) diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/clock.c b/target/linux/ar7-2.6/files/arch/mips/ar7/clock.c deleted file mode 100644 index 9bdc8f4076..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/clock.c +++ /dev/null @@ -1,470 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include - -#define BOOT_PLL_SOURCE_MASK 0x3 -#define CPU_PLL_SOURCE_SHIFT 16 -#define BUS_PLL_SOURCE_SHIFT 14 -#define USB_PLL_SOURCE_SHIFT 18 -#define DSP_PLL_SOURCE_SHIFT 22 -#define BOOT_PLL_SOURCE_AFE 0 -#define BOOT_PLL_SOURCE_BUS 0 -#define BOOT_PLL_SOURCE_REF 1 -#define BOOT_PLL_SOURCE_XTAL 2 -#define BOOT_PLL_SOURCE_CPU 3 -#define BOOT_PLL_BYPASS 0x00000020 -#define BOOT_PLL_ASYNC_MODE 0x02000000 -#define BOOT_PLL_2TO1_MODE 0x00008000 - -#define TNETD7200_CLOCK_ID_CPU 0 -#define TNETD7200_CLOCK_ID_DSP 1 -#define TNETD7200_CLOCK_ID_USB 2 - -#define TNETD7200_DEF_CPU_CLK 211000000 -#define TNETD7200_DEF_DSP_CLK 125000000 -#define TNETD7200_DEF_USB_CLK 48000000 - -struct tnetd7300_clock { - volatile u32 ctrl; -#define PREDIV_MASK 0x001f0000 -#define PREDIV_SHIFT 16 -#define POSTDIV_MASK 0x0000001f - u32 unused1[3]; - volatile u32 pll; -#define MUL_MASK 0x0000f000 -#define MUL_SHIFT 12 -#define PLL_MODE_MASK 0x00000001 -#define PLL_NDIV 0x00000800 -#define PLL_DIV 0x00000002 -#define PLL_STATUS 0x00000001 - u32 unused2[3]; -} __attribute__ ((packed)); - -struct tnetd7300_clocks { - struct tnetd7300_clock bus; - struct tnetd7300_clock cpu; - struct tnetd7300_clock usb; - struct tnetd7300_clock dsp; -} __attribute__ ((packed)); - -struct tnetd7200_clock { - volatile u32 ctrl; - u32 unused1[3]; -#define DIVISOR_ENABLE_MASK 0x00008000 - volatile u32 mul; - volatile u32 prediv; - volatile u32 postdiv; - volatile u32 postdiv2; - u32 unused2[6]; - volatile u32 cmd; - volatile u32 status; - volatile u32 cmden; - u32 padding[15]; -} __attribute__ ((packed)); - -struct tnetd7200_clocks { - struct tnetd7200_clock cpu; - struct tnetd7200_clock dsp; - struct tnetd7200_clock usb; -} __attribute__ ((packed)); - -int ar7_cpu_clock = 150000000; -EXPORT_SYMBOL(ar7_cpu_clock); -int ar7_bus_clock = 125000000; -EXPORT_SYMBOL(ar7_bus_clock); -int ar7_dsp_clock = 0; -EXPORT_SYMBOL(ar7_dsp_clock); - -static int gcd(int a, int b) -{ - int c; - - if (a < b) { - c = a; - a = b; - b = c; - } - while ((c = (a % b))) { - a = b; - b = c; - } - return b; -} - -static void approximate(int base, int target, int *prediv, - int *postdiv, int *mul) -{ - int i, j, k, freq, res = target; - for (i = 1; i <= 16; i++) { - for (j = 1; j <= 32; j++) { - for (k = 1; k <= 32; k++) { - freq = abs(base / j * i / k - target); - if (freq < res) { - res = freq; - *mul = i; - *prediv = j; - *postdiv = k; - } - } - } - } -} - -static void calculate(int base, int target, int *prediv, int *postdiv, - int *mul) -{ - int tmp_gcd, tmp_base, tmp_freq; - - for (*prediv = 1; *prediv <= 32; (*prediv)++) { - tmp_base = base / *prediv; - tmp_gcd = gcd(target, tmp_base); - *mul = target / tmp_gcd; - *postdiv = tmp_base / tmp_gcd; - if ((*mul < 1) || (*mul >= 16)) - continue; - if ((*postdiv > 0) & (*postdiv <= 32)) - break; - } - - if (base / (*prediv) * (*mul) / (*postdiv) != target) { - approximate(base, target, prediv, postdiv, mul); - tmp_freq = base / (*prediv) * (*mul) / (*postdiv); - printk(KERN_WARNING - "Adjusted requested frequency %d to %d\n", - target, tmp_freq); - } - - printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", - *prediv, *postdiv, *mul); -} - -static int tnetd7300_dsp_clock(void) -{ - u32 didr1, didr2; - u8 rev = ar7_chip_rev(); - didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18)); - didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c)); - if (didr2 & (1 << 23)) - return 0; - if ((rev >= 0x23) && (rev != 0x57)) - return 250000000; - if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22)) - > 4208000) - return 250000000; - return 0; -} - -static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, - u32 *bootcr, u32 bus_clock) -{ - int product; - int base_clock = AR7_REF_CLOCK; - u32 ctrl = clock->ctrl; - u32 pll = clock->pll; - int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1; - int postdiv = (ctrl & POSTDIV_MASK) + 1; - int divisor = prediv * postdiv; - int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1; - - switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { - case BOOT_PLL_SOURCE_BUS: - base_clock = bus_clock; - break; - case BOOT_PLL_SOURCE_REF: - base_clock = AR7_REF_CLOCK; - break; - case BOOT_PLL_SOURCE_XTAL: - base_clock = AR7_XTAL_CLOCK; - break; - case BOOT_PLL_SOURCE_CPU: - base_clock = ar7_cpu_clock; - break; - } - - if (*bootcr & BOOT_PLL_BYPASS) - return base_clock / divisor; - - if ((pll & PLL_MODE_MASK) == 0) - return (base_clock >> (mul / 16 + 1)) / divisor; - - if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) { - product = (mul & 1) ? - (base_clock * mul) >> 1 : - (base_clock * (mul - 1)) >> 2; - return product / divisor; - } - - if (mul == 16) - return base_clock / divisor; - - return base_clock * mul / divisor; -} - -static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, - u32 *bootcr, u32 frequency) -{ - u32 status; - int prediv, postdiv, mul; - int base_clock = ar7_bus_clock; - - switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { - case BOOT_PLL_SOURCE_BUS: - base_clock = ar7_bus_clock; - break; - case BOOT_PLL_SOURCE_REF: - base_clock = AR7_REF_CLOCK; - break; - case BOOT_PLL_SOURCE_XTAL: - base_clock = AR7_XTAL_CLOCK; - break; - case BOOT_PLL_SOURCE_CPU: - base_clock = ar7_cpu_clock; - break; - } - - calculate(base_clock, frequency, &prediv, &postdiv, &mul); - - clock->ctrl = ((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1); - mdelay(1); - clock->pll = 4; - do { - status = clock->pll; - } while (status & PLL_STATUS); - clock->pll = ((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e; - mdelay(75); -} - -static void __init tnetd7300_init_clocks(void) -{ - u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); - struct tnetd7300_clocks *clocks = (struct tnetd7300_clocks *)ioremap_nocache(AR7_REGS_POWER + 0x20, sizeof(struct tnetd7300_clocks)); - - ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, - &clocks->bus, bootcr, AR7_AFE_CLOCK); - - if (*bootcr & BOOT_PLL_ASYNC_MODE) { - ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, - &clocks->cpu, bootcr, AR7_AFE_CLOCK); - } else { - ar7_cpu_clock = ar7_bus_clock; - } -#if 0 - tnetd7300_set_clock(USB_PLL_SOURCE_SHIFT, &clocks->usb, - bootcr, 48000000); -#endif - if (ar7_dsp_clock == 250000000) - tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, - bootcr, ar7_dsp_clock); - - iounmap(clocks); - iounmap(bootcr); -} - -static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock, - u32 *bootcr, u32 bus_clock) -{ - int divisor = ((clock->prediv & 0x1f) + 1) * - ((clock->postdiv & 0x1f) + 1); - - if (*bootcr & BOOT_PLL_BYPASS) - return base / divisor; - - return base * ((clock->mul & 0xf) + 1) / divisor; -} - - -static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, - int prediv, int postdiv, int postdiv2, int mul, u32 frequency) -{ - printk("Clocks: base = %d, frequency = %u, prediv = %d, postdiv = %d, postdiv2 = %d, mul = %d\n", - base, frequency, prediv, postdiv, postdiv2, mul); - - clock->ctrl = 0; - clock->prediv = DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F); - clock->mul = ((mul - 1) & 0xF); - - for(mul = 0; mul < 2000; mul++) /* nop */; - - while(clock->status & 0x1) /* nop */; - - clock->postdiv = DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F); - - clock->cmden |= 1; - clock->cmd |= 1; - - while(clock->status & 0x1) /* nop */; - - clock->postdiv2 = DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F); - - clock->cmden |= 1; - clock->cmd |= 1; - - while(clock->status & 0x1) /* nop */; - - clock->ctrl |= 1; -} - -static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) -{ - if (*bootcr & BOOT_PLL_ASYNC_MODE) { - // Async - switch (clock_id) { - case TNETD7200_CLOCK_ID_DSP: - return AR7_REF_CLOCK; - default: - return AR7_AFE_CLOCK; - } - } else { - // Sync - if (*bootcr & BOOT_PLL_2TO1_MODE) { - // 2:1 - switch (clock_id) { - case TNETD7200_CLOCK_ID_DSP: - return AR7_REF_CLOCK; - default: - return AR7_AFE_CLOCK; - } - } else { - // 1:1 - return AR7_REF_CLOCK; - } - } -} - - -static void __init tnetd7200_init_clocks(void) -{ - u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); - struct tnetd7200_clocks *clocks = (struct tnetd7200_clocks *)ioremap_nocache(AR7_REGS_POWER + 0x80, sizeof(struct tnetd7200_clocks)); - int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv; - int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv; - int usb_base, usb_mul, usb_prediv, usb_postdiv; - -/* - Log from Fritz!Box 7170 Annex B: - - CPU revision is: 00018448 - Clocks: Async mode - Clocks: Setting DSP clock - Clocks: prediv: 1, postdiv: 1, mul: 5 - Clocks: base = 25000000, frequency = 125000000, prediv = 1, postdiv = 2, postdiv2 = 1, mul = 10 - Clocks: Setting CPU clock - Adjusted requested frequency 211000000 to 211968000 - Clocks: prediv: 1, postdiv: 1, mul: 6 - Clocks: base = 35328000, frequency = 211968000, prediv = 1, postdiv = 1, postdiv2 = -1, mul = 6 - Clocks: Setting USB clock - Adjusted requested frequency 48000000 to 48076920 - Clocks: prediv: 13, postdiv: 1, mul: 5 - Clocks: base = 125000000, frequency = 48000000, prediv = 13, postdiv = 1, postdiv2 = -1, mul = 5 - - DSL didn't work if you didn't set the postdiv 2:1 postdiv2 combination, driver hung on startup. - Haven't tested this on a synchronous board, neither do i know what to do with ar7_dsp_clock -*/ - - cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr); - dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr); - - if (*bootcr & BOOT_PLL_ASYNC_MODE) { - printk("Clocks: Async mode\n"); - - printk("Clocks: Setting DSP clock\n"); - calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); - ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; - tnetd7200_set_clock(dsp_base, &clocks->dsp, - dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, - ar7_bus_clock); - - printk("Clocks: Setting CPU clock\n"); - calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, &cpu_postdiv, &cpu_mul); - ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; - tnetd7200_set_clock(cpu_base, &clocks->cpu, - cpu_prediv, cpu_postdiv, -1, cpu_mul, - ar7_cpu_clock); - - } else { - if (*bootcr & BOOT_PLL_2TO1_MODE) { - printk("Clocks: Sync 2:1 mode\n"); - - printk("Clocks: Setting CPU clock\n"); - calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, &cpu_postdiv, &cpu_mul); - ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; - tnetd7200_set_clock(cpu_base, &clocks->cpu, - cpu_prediv, cpu_postdiv, -1, cpu_mul, - ar7_cpu_clock); - - printk("Clocks: Setting DSP clock\n"); - calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); - ar7_bus_clock = ar7_cpu_clock / 2; - tnetd7200_set_clock(dsp_base, &clocks->dsp, - dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, - ar7_bus_clock); - } else { - printk("Clocks: Sync 1:1 mode\n"); - - printk("Clocks: Setting DSP clock\n"); - calculate(dsp_base, TNETD7200_DEF_CPU_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); - ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; - tnetd7200_set_clock(dsp_base, &clocks->dsp, - dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, - ar7_bus_clock); - - ar7_cpu_clock = ar7_bus_clock; - } - } - - printk("Clocks: Setting USB clock\n"); - usb_base = ar7_bus_clock; - calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, &usb_postdiv, &usb_mul); - tnetd7200_set_clock(usb_base, &clocks->usb, - usb_prediv, usb_postdiv, -1, usb_mul, - TNETD7200_DEF_USB_CLK); - - #warning FIXME: ????! Hrmm - ar7_dsp_clock = ar7_cpu_clock; - - iounmap(clocks); - iounmap(bootcr); -} - -void __init ar7_init_clocks(void) -{ - switch (ar7_chip_id()) { - case AR7_CHIP_7100: -#warning FIXME: Check if the new 7200 clock init works for 7100 - tnetd7200_init_clocks(); - break; - case AR7_CHIP_7200: - tnetd7200_init_clocks(); - break; - case AR7_CHIP_7300: - ar7_dsp_clock = tnetd7300_dsp_clock(); - tnetd7300_init_clocks(); - break; - default: - break; - } -} diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/gpio.c b/target/linux/ar7-2.6/files/arch/mips/ar7/gpio.c deleted file mode 100644 index 8b3d3a958a..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/gpio.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static char *ar7_gpio_list[AR7_GPIO_MAX] = { 0, }; - -int gpio_request(unsigned gpio, char *label) -{ - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - if (ar7_gpio_list[gpio]) - return -EBUSY; - - if (label) { - ar7_gpio_list[gpio] = label; - } else { - ar7_gpio_list[gpio] = "busy"; - } - - return 0; -} -EXPORT_SYMBOL(gpio_request); - -void gpio_free(unsigned gpio) -{ - BUG_ON(!ar7_gpio_list[gpio]); - ar7_gpio_list[gpio] = NULL; -} -EXPORT_SYMBOL(gpio_free); diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/irq.c b/target/linux/ar7-2.6/files/arch/mips/ar7/irq.c deleted file mode 100644 index 1a09aedc1a..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/irq.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -#include -#include -#include -#include - -#define EXCEPT_OFFSET 0x80 -#define PACE_OFFSET 0xA0 -#define CHNLS_OFFSET 0x200 - -#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10) -#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8) -#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */ -#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */ -#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */ -#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */ -#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */ -#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */ -#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */ -#define PIR_OFFSET (0x40) -#define MSR_OFFSET (0x44) -#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */ -#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */ - -#define REG(addr) (*(volatile u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr)) - -#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4)) - -static void ar7_unmask_irq(unsigned int irq_nr); -static void ar7_mask_irq(unsigned int irq_nr); -static void ar7_unmask_secondary_irq(unsigned int irq_nr); -static void ar7_mask_secondary_irq(unsigned int irq_nr); -static irqreturn_t ar7_cascade(int interrupt, void *dev); -static irqreturn_t ar7_secondary_cascade(int interrupt, void *dev); -static void ar7_irq_init(int base); -static int ar7_irq_base; - -static struct irq_chip ar7_irq_type = { - .typename = "AR7", - .name = "AR7", - .unmask = ar7_unmask_irq, - .mask = ar7_mask_irq, -}; - -static struct irq_chip ar7_secondary_irq_type = { - .name = "AR7", - .unmask = ar7_unmask_secondary_irq, - .mask = ar7_mask_secondary_irq, -}; - -static struct irqaction ar7_cascade_action = { - .handler = ar7_cascade, - .name = "AR7 cascade interrupt" -}; - -static struct irqaction ar7_secondary_cascade_action = { - .handler = ar7_secondary_cascade, - .name = "AR7 secondary cascade interrupt" -}; - -static void ar7_unmask_irq(unsigned int irq) -{ - unsigned long flags; - local_irq_save(flags); - /* enable the interrupt channel bit */ - REG(ESR_OFFSET(irq)) = 1 << ((irq - ar7_irq_base) % 32); - local_irq_restore(flags); -} - -static void ar7_mask_irq(unsigned int irq) -{ - unsigned long flags; - local_irq_save(flags); - /* disable the interrupt channel bit */ - REG(ECR_OFFSET(irq)) = 1 << ((irq - ar7_irq_base) % 32); - local_irq_restore(flags); -} - -static void ar7_unmask_secondary_irq(unsigned int irq) -{ - unsigned long flags; - local_irq_save(flags); - /* enable the interrupt channel bit */ - REG(SEC_ESR_OFFSET) = 1 << (irq - ar7_irq_base - 40); - local_irq_restore(flags); -} - -static void ar7_mask_secondary_irq(unsigned int irq) -{ - unsigned long flags; - local_irq_save(flags); - /* disable the interrupt channel bit */ - REG(SEC_ECR_OFFSET) = 1 << (irq - ar7_irq_base - 40); - local_irq_restore(flags); -} - -void __init arch_init_irq(void) { - mips_cpu_irq_init(); - ar7_irq_init(8); -} - -static void __init ar7_irq_init(int base) -{ - int i; - /* - Disable interrupts and clear pending - */ - REG(ECR_OFFSET(0)) = 0xffffffff; - REG(ECR_OFFSET(32)) = 0xff; - REG(SEC_ECR_OFFSET) = 0xffffffff; - REG(CR_OFFSET(0)) = 0xffffffff; - REG(CR_OFFSET(32)) = 0xff; - REG(SEC_CR_OFFSET) = 0xffffffff; - - ar7_irq_base = base; - - for(i = 0; i < 40; i++) { - REG(CHNL_OFFSET(i)) = i; - /* Primary IRQ's */ - irq_desc[i + base].status = IRQ_DISABLED; - irq_desc[i + base].action = NULL; - irq_desc[i + base].depth = 1; - irq_desc[i + base].chip = &ar7_irq_type; - /* Secondary IRQ's */ - if (i < 32) { - irq_desc[i + base + 40].status = IRQ_DISABLED; - irq_desc[i + base + 40].action = NULL; - irq_desc[i + base + 40].depth = 1; - irq_desc[i + base + 40].chip = &ar7_secondary_irq_type; - } - } - - setup_irq(2, &ar7_cascade_action); - setup_irq(ar7_irq_base, &ar7_secondary_cascade_action); - set_c0_status(IE_IRQ0); -} - -static irqreturn_t ar7_cascade(int interrupt, void *dev) -{ - int irq; - - irq = (REG(PIR_OFFSET) & 0x3F); - REG(CR_OFFSET(irq)) = 1 << (irq % 32); - - do_IRQ(irq + ar7_irq_base); - - return IRQ_HANDLED; -} - -static irqreturn_t ar7_secondary_cascade(int interrupt, void *dev) -{ - int irq = 0, i; - unsigned long status; - - status = REG(SEC_SR_OFFSET); - if (unlikely(!status)) { - spurious_interrupt(); - return IRQ_NONE; - } - - for (i = 0; i < 32; i++) - if (status & (i << 1)) { - irq = i + 40; - REG(SEC_CR_OFFSET) = 1 << i; - break; - } - - do_IRQ(irq + ar7_irq_base); - - return IRQ_HANDLED; -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause(); - if (pending & STATUSF_IP7) /* cpu timer */ - do_IRQ(7); - else if (pending & STATUSF_IP2) /* int0 hardware line */ - do_IRQ(2); - else - spurious_interrupt(); -} diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/memory.c b/target/linux/ar7-2.6/files/arch/mips/ar7/memory.c deleted file mode 100644 index 99faf217b7..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/memory.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * - * Based on arch/mips/mm/init.c - * Copyright (C) 1994 - 2000 Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -static int __init memsize(void) -{ - u32 size = (64 << 20); - volatile u32 *addr = (u32 *)KSEG1ADDR(0x14000000 + size - 4); - u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); - - while (addr > kernel_end) { - *addr = (u32)addr; - size >>= 1; - addr -= size >> 2; - } - - do { - addr += size >> 2; - if (*addr != (u32)addr) - break; - size <<= 1; - } while (size < (64 << 20)); - - return size; -} - -void __init prom_meminit(void) -{ - unsigned long pages; - - pages = memsize() >> PAGE_SHIFT; - add_memory_region(ARCH_PFN_OFFSET << PAGE_SHIFT, pages << - PAGE_SHIFT, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ - return; -} diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c b/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c deleted file mode 100644 index cae35bc229..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/platform.c +++ /dev/null @@ -1,412 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct plat_vlynq_data { - struct plat_vlynq_ops ops; - int gpio_bit; - int reset_bit; -}; - - -static int vlynq_on(struct vlynq_device *dev) -{ - int result; - struct plat_vlynq_data *pdata = dev->dev.platform_data; - - if ((result = gpio_request(pdata->gpio_bit, "vlynq"))) - goto out; - - ar7_device_reset(pdata->reset_bit); - - if ((result = ar7_gpio_disable(pdata->gpio_bit))) - goto out_enabled; - - if ((result = ar7_gpio_enable(pdata->gpio_bit))) - goto out_enabled; - - if ((result = gpio_direction_output(pdata->gpio_bit))) - goto out_gpio_enabled; - - gpio_set_value(pdata->gpio_bit, 0); - mdelay(50); - - gpio_set_value(pdata->gpio_bit, 1); - mdelay(50); - - return 0; - -out_gpio_enabled: - ar7_gpio_disable(pdata->gpio_bit); -out_enabled: - ar7_device_disable(pdata->reset_bit); - gpio_free(pdata->gpio_bit); -out: - return result; -} - -static void vlynq_off(struct vlynq_device *dev) -{ - struct plat_vlynq_data *pdata = dev->dev.platform_data; - ar7_gpio_disable(pdata->gpio_bit); - gpio_free(pdata->gpio_bit); - ar7_device_disable(pdata->reset_bit); -} - -static struct resource physmap_flash_resource = { - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x10000000, - .end = 0x107fffff, -}; - -static struct resource cpmac_low_res[] = { - { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_MAC0, - .end = AR7_REGS_MAC0 + 0x7FF, - }, - { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 27, - .end = 27, - }, -}; - -static struct resource cpmac_high_res[] = { - { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_MAC1, - .end = AR7_REGS_MAC1 + 0x7FF, - }, - { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 41, - .end = 41, - }, -}; - -static struct resource vlynq_low_res[] = { - { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_VLYNQ0, - .end = AR7_REGS_VLYNQ0 + 0xff, - }, - { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 29, - .end = 29, - }, - { - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x04000000, - .end = 0x04ffffff, - }, - { - .name = "devirq", - .flags = IORESOURCE_IRQ, - .start = 80, - .end = 111, - }, -}; - -static struct resource vlynq_high_res[] = { - { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_VLYNQ1, - .end = AR7_REGS_VLYNQ1 + 0xFF, - }, - { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 33, - .end = 33, - }, - { - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x0c000000, - .end = 0x0cffffff, - }, - { - .name = "devirq", - .flags = IORESOURCE_IRQ, - .start = 112, - .end = 143, - }, -}; - -static struct physmap_flash_data physmap_flash_data = { - .width = 2, -}; - -static struct plat_cpmac_data cpmac_low_data = { - .reset_bit = 17, - .power_bit = 20, - .phy_mask = 0x80000000, -}; - -static struct plat_cpmac_data cpmac_high_data = { - .reset_bit = 21, - .power_bit = 22, - .phy_mask = 0x7fffffff, -}; - -static struct plat_vlynq_data vlynq_low_data = { - .ops.on = vlynq_on, - .ops.off = vlynq_off, - .reset_bit = 20, - .gpio_bit = 18, -}; - -static struct plat_vlynq_data vlynq_high_data = { - .ops.on = vlynq_on, - .ops.off = vlynq_off, - .reset_bit = 16, - .gpio_bit = 19, -}; - -static struct platform_device physmap_flash = { - .id = 0, - .name = "physmap-flash", - .dev.platform_data = &physmap_flash_data, - .resource = &physmap_flash_resource, - .num_resources = 1, -}; - -static struct platform_device cpmac_low = { - .id = 0, - .name = "cpmac", - .dev.platform_data = &cpmac_low_data, - .resource = cpmac_low_res, - .num_resources = ARRAY_SIZE(cpmac_low_res), -}; - -static struct platform_device cpmac_high = { - .id = 1, - .name = "cpmac", - .dev.platform_data = &cpmac_high_data, - .resource = cpmac_high_res, - .num_resources = ARRAY_SIZE(cpmac_high_res), -}; - -static struct platform_device vlynq_low = { - .id = 0, - .name = "vlynq", - .dev.platform_data = &vlynq_low_data, - .resource = vlynq_low_res, - .num_resources = ARRAY_SIZE(vlynq_low_res), -}; - -static struct platform_device vlynq_high = { - .id = 1, - .name = "vlynq", - .dev.platform_data = &vlynq_high_data, - .resource = vlynq_high_res, - .num_resources = ARRAY_SIZE(vlynq_high_res), -}; - - -/* This is proper way to define uart ports, but they are then detected - * as xscale and, obviously, don't work... - */ -#if !defined(CONFIG_SERIAL_8250) - -static struct plat_serial8250_port uart0_data = -{ - .mapbase = AR7_REGS_UART0, - .irq = AR7_IRQ_UART0, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, -}; - -static struct plat_serial8250_port uart1_data = -{ - .mapbase = UR8_REGS_UART1, - .irq = AR7_IRQ_UART1, - .regshift = 2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, -}; - -static struct plat_serial8250_port uart_data[] = { - uart0_data, - uart1_data, - { .flags = 0 } -}; - -static struct plat_serial8250_port uart_data_single[] = { - uart0_data, - { .flags = 0 } -}; - -static struct platform_device uart = { - .id = 0, - .name = "serial8250", - .dev.platform_data = uart_data_single -}; -#endif - -static inline unsigned char char2hex(char h) -{ - switch (h) { - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': - return h - '0'; - case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': - return h - 'A' + 10; - case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': - return h - 'a' + 10; - default: - return 0; - } -} - -static void cpmac_get_mac(int instance, unsigned char *dev_addr) -{ - int i; - char name[5], default_mac[] = "00:00:00:12:34:56", *mac; - - mac = NULL; - sprintf(name, "mac%c", 'a' + instance); - mac = prom_getenv(name); - if (!mac) { - sprintf(name, "mac%c", 'a'); - mac = prom_getenv(name); - } - if (!mac) - mac = default_mac; - for (i = 0; i < 6; i++) - dev_addr[i] = (char2hex(mac[i * 3]) << 4) + - char2hex(mac[i * 3 + 1]); -} - -static int __init ar7_register_devices(void) -{ - int res; - -#ifdef CONFIG_SERIAL_8250 - - static struct uart_port uart_port[2]; - - memset(uart_port, 0, sizeof(struct uart_port) * 2); - - uart_port[0].type = PORT_AR7; - uart_port[0].line = 0; - uart_port[0].irq = AR7_IRQ_UART0; - uart_port[0].uartclk = ar7_bus_freq() / 2; - uart_port[0].iotype = UPIO_MEM; - uart_port[0].mapbase = AR7_REGS_UART0; - uart_port[0].membase = ioremap(uart_port[0].mapbase, 256); - uart_port[0].regshift = 2; - res = early_serial_setup(&uart_port[0]); - if (res) - return res; - - - // Only TNETD73xx have a second serial port - if (ar7_has_second_uart()) { - uart_port[1].type = PORT_AR7; - uart_port[1].line = 1; - uart_port[1].irq = AR7_IRQ_UART1; - uart_port[1].uartclk = ar7_bus_freq() / 2; - uart_port[1].iotype = UPIO_MEM; - uart_port[1].mapbase = UR8_REGS_UART1; - uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); - uart_port[1].regshift = 2; - res = early_serial_setup(&uart_port[1]); - if (res) - return res; - } - -#else // !CONFIG_SERIAL_8250 - - uart_data[0].uartclk = ar7_bus_freq() / 2; - uart_data[1].uartclk = uart_data[0].uartclk; - - // Only TNETD73xx have a second serial port - if (ar7_has_second_uart()) { - uart.dev.platform_data = uart_data; - } - - res = platform_device_register(&uart); - if (res) - return res; - -#endif // CONFIG_SERIAL_8250 - - res = platform_device_register(&physmap_flash); - if (res) - return res; - - res = platform_device_register(&vlynq_low); - if (res) - return res; - - ar7_device_disable(vlynq_low_data.reset_bit); - if (ar7_has_high_vlynq()) { - ar7_device_disable(vlynq_high_data.reset_bit); - res = platform_device_register(&vlynq_high); - if (res) - return res; - } - - if (ar7_has_high_cpmac()) { - cpmac_get_mac(1, cpmac_high_data.dev_addr); - res = platform_device_register(&cpmac_high); - if (res) - return res; - } else { - cpmac_low_data.phy_mask = 0xffffffff; - } - - cpmac_get_mac(0, cpmac_low_data.dev_addr); - res = platform_device_register(&cpmac_low); - - return res; -} - - -arch_initcall(ar7_register_devices); diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/prom.c b/target/linux/ar7-2.6/files/arch/mips/ar7/prom.c deleted file mode 100644 index 28397427d0..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/prom.c +++ /dev/null @@ -1,327 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Putting things on the screen/serial line using YAMONs facilities. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define MAX_ENTRY 80 - -struct env_var { - char *name; - char *value; -}; - -static struct env_var adam2_env[MAX_ENTRY] = { { 0, }, }; - -char * prom_getenv(char *name) -{ - int i; - for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++) - if (!strcmp(name, adam2_env[i].name)) - return adam2_env[i].value; - - return NULL; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -static void __init ar7_init_cmdline(int argc, char *argv[]) -{ - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ - - cp = &(arcs_cmdline[0]); - while(actr < argc) { - strcpy(cp, argv[actr]); - cp += strlen(argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) { - /* get rid of trailing space */ - --cp; - *cp = '\0'; - } -} - -struct psbl_rec { - u32 psbl_size; - u32 env_base; - u32 env_size; - u32 ffs_base; - u32 ffs_size; -}; - -static __initdata char psp_env_version[] = "TIENV0.8"; - -struct psp_env_chunk { - u8 num; - u8 ctrl; - u16 csum; - u8 len; - char data[11]; -} __attribute__ ((packed)); - -struct psp_var_map_entry { - u8 num; - char *value; -}; - -static struct psp_var_map_entry psp_var_map[] = { - { 1, "cpufrequency" }, - { 2, "memsize" }, - { 3, "flashsize" }, - { 4, "modetty0" }, - { 5, "modetty1" }, - { 8, "maca" }, - { 9, "macb" }, - { 28, "sysfrequency" }, - { 38, "mipsfrequency" }, -}; - -/* - -Well-known variable (num is looked up in table above for matching variable name) -Example: cpufrequency=211968000 -+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ -| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF | -+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ - -Name=Value pair in a single chunk -Example: NAME=VALUE -+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ -| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 | -+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ - -Name=Value pair in 2 chunks (len is the number of chunks) -Example: bootloaderVersion=1.3.7.15 -+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ -| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V | -+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ -| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 | -+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ - -Data is padded with 0xFF - -*/ - -#define PSP_ENV_SIZE 4096 - -static char psp_env_data[PSP_ENV_SIZE] = { 0, }; - -static char * __init lookup_psp_var_map(u8 num) -{ - int i; - - for (i = 0; i < sizeof(psp_var_map); i++) - if (psp_var_map[i].num == num) - return psp_var_map[i].value; - - return NULL; -} - -static void __init add_adam2_var(char *name, char *value) -{ - int i; - for (i = 0; i < MAX_ENTRY; i++) { - if (!adam2_env[i].name) { - adam2_env[i].name = name; - adam2_env[i].value = value; - return; - } else if (!strcmp(adam2_env[i].name, name)) { - adam2_env[i].value = value; - return; - } - } -} - -static int __init parse_psp_env(void *psp_env_base) -{ - int i, n; - char *name, *value; - struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data; - - memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE); - - i = 1; - n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk); - while (i < n) { - if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n)) - break; - value = chunks[i].data; - if (chunks[i].num) { - name = lookup_psp_var_map(chunks[i].num); - } else { - name = value; - value += strlen(name) + 1; - } - if (name) - add_adam2_var(name, value); - i += chunks[i].len; - } - return 0; -} - -static void __init ar7_init_env(struct env_var *env) -{ - int i; - struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); - void *psp_env = (void *)KSEG1ADDR(psbl->env_base); - - if(strcmp(psp_env, psp_env_version) == 0) { - parse_psp_env(psp_env); - } else { - for (i = 0; i < MAX_ENTRY; i++, env++) - if (env->name) - add_adam2_var(env->name, env->value); - } -} - -static void __init console_config(void) -{ -#ifdef CONFIG_SERIAL_8250_CONSOLE - char console_string[40]; - int baud = 0; - char parity = '\0', bits = '\0', flow = '\0'; - char *s, *p; - - if (strstr(prom_getcmdline(), "console=")) - return; - -#ifdef CONFIG_KGDB - if (!strstr(prom_getcmdline(), "nokgdb")) - { - strcat(prom_getcmdline(), " console=kgdb"); - kgdb_enabled = 1; - return; - } -#endif - - if ((s = prom_getenv("modetty0"))) { - baud = simple_strtoul(s, &p, 10); - s = p; - if (*s == ',') s++; - if (*s) parity = *s++; - if (*s == ',') s++; - if (*s) bits = *s++; - if (*s == ',') s++; - if (*s == 'h') flow = 'r'; - } - - if (baud == 0) - baud = 38400; - if (parity != 'n' && parity != 'o' && parity != 'e') - parity = 'n'; - if (bits != '7' && bits != '8') - bits = '8'; - if (flow == '\0') - flow = 'r'; - - sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, - parity, bits, flow); - strcat(prom_getcmdline(), console_string); -#endif -} - -void __init prom_init(void) -{ - ar7_init_cmdline(fw_arg0, (char **)fw_arg1); - ar7_init_env((struct env_var *)fw_arg2); - console_config(); -} - -#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) -static inline unsigned int serial_in(int offset) -{ - return readb((void *)PORT(offset)); -} - -static inline void serial_out(int offset, int value) -{ - writeb(value, (void *)PORT(offset)); -} - -char prom_getchar(void) -{ - while (!(serial_in(UART_LSR) & UART_LSR_DR)); - return serial_in(UART_RX); -} - -int prom_putchar(char c) -{ - while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0); - serial_out(UART_TX, c); - return 1; -} - -// from adm5120/prom.c -void prom_printf(char *fmt, ...) -{ - va_list args; - int l; - char *p, *buf_end; - char buf[1024]; - - va_start(args, fmt); - l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */ - va_end(args); - - buf_end = buf + l; - - for (p = buf; p < buf_end; p++) { - /* Crude cr/nl handling is better than none */ - if (*p == '\n') - prom_putchar('\r'); - prom_putchar(*p); - } -} - -#ifdef CONFIG_KGDB -int putDebugChar(char c) -{ - return prom_putchar(c); -} - -char getDebugChar(void) -{ - return prom_getchar(); -} -#endif - -EXPORT_SYMBOL(prom_getenv); diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/setup.c b/target/linux/ar7-2.6/files/arch/mips/ar7/setup.c deleted file mode 100644 index 4abc39f1df..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/setup.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern void ar7_time_init(void); -static void ar7_machine_restart(char *command); -static void ar7_machine_halt(void); -static void ar7_machine_power_off(void); - -static void ar7_machine_restart(char *command) -{ - volatile u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET + - AR7_RESET_SOFTWARE, 1); - *softres_reg = 1; -} - -static void ar7_machine_halt(void) -{ - while (1); -} - -static void ar7_machine_power_off(void) -{ - volatile u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1); - u32 power_state = *power_reg | (3 << 30); - *power_reg = power_state; - ar7_machine_halt(); -} - -const char *get_system_type(void) -{ - u16 chip_id = ar7_chip_id(); - switch (chip_id) { - case AR7_CHIP_7300: - return "TI AR7 (TNETD7300)"; - case AR7_CHIP_7100: - return "TI AR7 (TNETD7100)"; - case AR7_CHIP_7200: - return "TI AR7 (TNETD7200)"; - default: - return "TI AR7 (Unknown)"; - } -} - -static int __init ar7_init_console(void) -{ - return 0; -} - -/* - * Initializes basic routines and structures pointers, memory size (as - * given by the bios and saves the command line. - */ - -extern void ar7_init_clocks(void); - -void __init plat_mem_setup(void) -{ - unsigned long io_base; - - _machine_restart = ar7_machine_restart; - _machine_halt = ar7_machine_halt; - pm_power_off = ar7_machine_power_off; - board_time_init = ar7_time_init; - panic_timeout = 3; - - io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000); - if (!io_base) panic("Can't remap IO base!\n"); - set_io_port_base(io_base); - - prom_meminit(); -#warning FIXME: clock initialisation - ar7_init_clocks(); - - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - printk("%s, ID: 0x%04x, Revision: 0x%02x\n", get_system_type(), - ar7_chip_id(), ar7_chip_rev()); -} - -console_initcall(ar7_init_console); diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/time.c b/target/linux/ar7-2.6/files/arch/mips/ar7/time.c deleted file mode 100644 index 6a1ee7a4df..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/time.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * Carsten Langgaard, carstenl@mips.com - * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * Setting up the clock on the MIPS boards. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -void __init ar7_time_init(void) -{ - mips_hpt_frequency = ar7_cpu_freq() / 2; -} - -void __init plat_timer_setup(struct irqaction *irq) -{ - setup_irq(7, irq); -} diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c b/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c deleted file mode 100644 index eb11a3b002..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq-pci.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include - -#define VLYNQ_PCI_SLOTS 2 - -struct vlynq_reg_config { - u32 offset; - u32 value; -}; - -struct vlynq_pci_config { - u32 chip_id; - char name[32]; - struct vlynq_mapping rx_mapping[4]; - int irq; - int irq_type; - u32 chip; - u32 class; - int num_regs; - struct vlynq_reg_config regs[10]; -}; - -struct vlynq_pci_private { - u32 latency; - u32 cache_line; - u32 command; - u32 sz_mask; - struct vlynq_pci_config *config; -}; - -static struct vlynq_pci_config known_devices[] = { - { - .chip_id = 0x00000009, .name = "TI ACX111", - .rx_mapping = { - { .size = 0x22000, .offset = 0xf0000000 }, - { .size = 0x40000, .offset = 0xc0000000 }, - { .size = 0x0, .offset = 0x0 }, - { .size = 0x0, .offset = 0x0 }, - }, - .irq = 0, .chip = 0x9066104c, - .irq_type = IRQ_TYPE_EDGE_RISING, - .class = PCI_CLASS_NETWORK_OTHER, - .num_regs = 5, - .regs = { - { .offset = 0x790, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) }, - { .offset = 0x794, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) }, - { .offset = 0x740, .value = 0 }, - { .offset = 0x744, .value = 0x00010000 }, - { .offset = 0x764, .value = 0x00010000 }, - }, - }, -}; - -static struct vlynq_device *slots[VLYNQ_PCI_SLOTS] = { NULL, }; - -static struct resource vlynq_io_resource = { - .start = 0x00000000, - .end = 0x00000000, - .name = "pci IO space", - .flags = IORESOURCE_IO -}; - -static struct resource vlynq_mem_resource = { - .start = 0x00000000, - .end = 0x00000000, - .name = "pci memory space", - .flags = IORESOURCE_MEM -}; - -static inline u32 vlynq_get_mapped(struct vlynq_device *dev, int res) -{ - int i; - struct vlynq_pci_private *priv = dev->priv; - u32 ret = dev->mem_start; - if (!priv->config->rx_mapping[res].size) return 0; - for (i = 0; i < res; i++) - ret += priv->config->rx_mapping[i].size; - - return ret; -} - -static inline u32 vlynq_read(u32 val, int size) { - switch (size) { - case 1: - return *(u8 *)&val; - case 2: - return *(u16 *)&val; - } - return val; -} - -static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) -{ - struct vlynq_device *dev; - struct vlynq_pci_private *priv; - int resno, slot = PCI_SLOT(devfn); - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - if (slot >= VLYNQ_PCI_SLOTS) - return PCIBIOS_DEVICE_NOT_FOUND; - - dev = slots[slot]; - - if (!dev || (PCI_FUNC(devfn) > 0)) - return PCIBIOS_DEVICE_NOT_FOUND; - - priv = dev->priv; - - switch (where) { - case PCI_VENDOR_ID: - *val = vlynq_read(priv->config->chip, size); - break; - case PCI_DEVICE_ID: - *val = priv->config->chip & 0xffff; - case PCI_COMMAND: - *val = priv->command; - case PCI_STATUS: -/* *val = PCI_STATUS_CAP_LIST;*/ - *val = 0; - break; - case PCI_CLASS_REVISION: - *val = priv->config->class; - break; - case PCI_LATENCY_TIMER: - *val = priv->latency; - break; - case PCI_HEADER_TYPE: - *val = PCI_HEADER_TYPE_NORMAL; - break; - case PCI_CACHE_LINE_SIZE: - *val = priv->cache_line; - break; - case PCI_BASE_ADDRESS_0: - case PCI_BASE_ADDRESS_1: - case PCI_BASE_ADDRESS_2: - case PCI_BASE_ADDRESS_3: - resno = (where - PCI_BASE_ADDRESS_0) >> 2; - if (priv->sz_mask & (1 << resno)) { - priv->sz_mask &= ~(1 << resno); - *val = priv->config->rx_mapping[resno].size; - } else { - *val = vlynq_get_mapped(dev, resno); - } - break; - case PCI_BASE_ADDRESS_4: - case PCI_BASE_ADDRESS_5: - case PCI_SUBSYSTEM_VENDOR_ID: - case PCI_SUBSYSTEM_ID: - case PCI_ROM_ADDRESS: - case PCI_INTERRUPT_LINE: - case PCI_CARDBUS_CIS: - case PCI_CAPABILITY_LIST: - *val = 0; - break; - case PCI_INTERRUPT_PIN: - *val = 1; - break; - default: - printk("%s: Read of unknown register 0x%x (size %d)\n", - dev->dev.bus_id, where, size); - return PCIBIOS_BAD_REGISTER_NUMBER; - } - return PCIBIOS_SUCCESSFUL; -} - -static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) -{ - struct vlynq_device *dev; - struct vlynq_pci_private *priv; - int resno, slot = PCI_SLOT(devfn); - - if ((size == 2) && (where & 1)) - return PCIBIOS_BAD_REGISTER_NUMBER; - else if ((size == 4) && (where & 3)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - if (slot >= VLYNQ_PCI_SLOTS) - return PCIBIOS_DEVICE_NOT_FOUND; - - dev = slots[slot]; - - if (!dev || (PCI_FUNC(devfn) > 0)) - return PCIBIOS_DEVICE_NOT_FOUND; - - priv = dev->priv; - - switch (where) { - case PCI_VENDOR_ID: - case PCI_DEVICE_ID: - case PCI_STATUS: - case PCI_CLASS_REVISION: - case PCI_HEADER_TYPE: - case PCI_CACHE_LINE_SIZE: - case PCI_SUBSYSTEM_VENDOR_ID: - case PCI_SUBSYSTEM_ID: - case PCI_INTERRUPT_LINE: - case PCI_INTERRUPT_PIN: - case PCI_CARDBUS_CIS: - case PCI_CAPABILITY_LIST: - return PCIBIOS_FUNC_NOT_SUPPORTED; - case PCI_COMMAND: - priv->command = val; - case PCI_LATENCY_TIMER: - priv->latency = val; - break; - case PCI_BASE_ADDRESS_0: - case PCI_BASE_ADDRESS_1: - case PCI_BASE_ADDRESS_2: - case PCI_BASE_ADDRESS_3: - if (val == 0xffffffff) { - resno = (where - PCI_BASE_ADDRESS_0) >> 2; - priv->sz_mask |= (1 << resno); - break; - } - case PCI_BASE_ADDRESS_4: - case PCI_BASE_ADDRESS_5: - case PCI_ROM_ADDRESS: - break; - default: - printk("%s: Write to unknown register 0x%x (size %d) value=0x%x\n", - dev->dev.bus_id, where, size, val); - return PCIBIOS_BAD_REGISTER_NUMBER; - } - return PCIBIOS_SUCCESSFUL; -} - -static struct pci_ops vlynq_pci_ops = { - vlynq_config_read, - vlynq_config_write -}; - -static struct pci_controller vlynq_controller = { - .pci_ops = &vlynq_pci_ops, - .io_resource = &vlynq_io_resource, - .mem_resource = &vlynq_mem_resource, -}; - -static int vlynq_pci_probe(struct vlynq_device *dev) -{ - int result, i; - u32 chip_id, addr; - struct vlynq_pci_private *priv; - struct vlynq_mapping mapping[4] = { { 0, }, }; - struct vlynq_pci_config *config = NULL; - - result = vlynq_set_local_irq(dev, 31); - if (result) - return result; - - result = vlynq_set_remote_irq(dev, 30); - if (result) - return result; - - result = vlynq_device_enable(dev); - if (result) - return result; - - chip_id = vlynq_remote_id(dev); - for (i = 0; i < ARRAY_SIZE(known_devices); i++) - if (chip_id == known_devices[i].chip_id) - config = &known_devices[i]; - - if (!config) { - printk("vlynq-pci: skipping unknown device " - "%04x:%04x at %s\n", chip_id >> 16, - chip_id & 0xffff, dev->dev.bus_id); - result = -ENODEV; - goto fail; - } - - printk("vlynq-pci: attaching device %s at %s\n", - config->name, dev->dev.bus_id); - - priv = kmalloc(sizeof(struct vlynq_pci_private), GFP_KERNEL); - if (!priv) { - printk(KERN_ERR "%s: failed to allocate private data\n", - dev->dev.bus_id); - result = -ENOMEM; - goto fail; - } - - memset(priv, 0, sizeof(struct vlynq_pci_private)); - priv->latency = 64; - priv->cache_line = 32; - priv->config = config; - - mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT; - mapping[0].size = 0x02000000; - vlynq_set_local_mapping(dev, dev->mem_start, mapping); - vlynq_set_remote_mapping(dev, 0, config->rx_mapping); - - set_irq_type(vlynq_virq_to_irq(dev, config->irq), config->irq_type); - - addr = (u32)ioremap_nocache(dev->mem_start, 0x10000); - if (!addr) { - printk(KERN_ERR "%s: failed to remap io memory\n", - dev->dev.bus_id); - result = -ENXIO; - goto fail; - } - - for (i = 0; i < config->num_regs; i++) - *(volatile u32 *)(addr + config->regs[i].offset) = - config->regs[i].value; - - dev->priv = priv; - for (i = 0; i < VLYNQ_PCI_SLOTS; i++) { - if (!slots[i]) { - slots[i] = dev; - break; - } - } - - return 0; - -fail: - vlynq_device_disable(dev); - - return result; -} - -static int vlynq_pci_remove(struct vlynq_device *dev) -{ - int i; - struct vlynq_pci_private *priv = dev->priv; - - for (i = 0; i < VLYNQ_PCI_SLOTS; i++) - if (slots[i] == dev) - slots[i] = NULL; - - vlynq_device_disable(dev); - kfree(priv); - - return 0; -} - -static struct vlynq_driver vlynq_pci = { - .name = "PCI over VLYNQ emulation", - .probe = vlynq_pci_probe, - .remove = vlynq_pci_remove, -}; - -int vlynq_pci_init(void) -{ - int res; - res = vlynq_register_driver(&vlynq_pci); - if (res) - return res; - - register_pci_controller(&vlynq_controller); - - return 0; -} - -int pcibios_map_irq(struct pci_dev *pdev, u8 slot, u8 pin) -{ - struct vlynq_device *dev; - struct vlynq_pci_private *priv; - - dev = slots[slot]; - - if (!dev) - return 0; - - priv = dev->priv; - - return vlynq_virq_to_irq(dev, priv->config->irq); -} - -/* Do platform specific device initialization at pci_enable_device() time */ -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c b/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c deleted file mode 100644 index c9be214721..0000000000 --- a/target/linux/ar7-2.6/files/arch/mips/ar7/vlynq.c +++ /dev/null @@ -1,553 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define PER_DEVICE_IRQS 32 - -#define VLYNQ_CTRL_PM_ENABLE 0x80000000 -#define VLYNQ_CTRL_CLOCK_INT 0x00008000 -#define VLYNQ_CTRL_CLOCK_DIV(x) ((x & 7) << 16) -#define VLYNQ_CTRL_INT_LOCAL 0x00004000 -#define VLYNQ_CTRL_INT_ENABLE 0x00002000 -#define VLYNQ_CTRL_INT_VECTOR(x) ((x & 0x1f) << 8) -#define VLYNQ_CTRL_INT2CFG 0x00000080 -#define VLYNQ_CTRL_RESET 0x00000001 - -#define VLYNQ_STATUS_RERROR 0x00000100 -#define VLYNQ_STATUS_LERROR 0x00000080 -#define VLYNQ_STATUS_LINK 0x00000001 - -#define VINT_ENABLE 0x00000100 -#define VINT_TYPE_EDGE 0x00000080 -#define VINT_LEVEL_LOW 0x00000040 -#define VINT_VECTOR(x) (x & 0x1f) -#define VINT_OFFSET(irq) (8 * ((irq) % 4)) - -#define VLYNQ_AUTONEGO_V2 0x00010000 - -struct vlynq_regs { - volatile u32 revision; - volatile u32 control; - volatile u32 status; - volatile u32 int_prio; - volatile u32 int_status; - volatile u32 int_pending; - volatile u32 int_ptr; - volatile u32 tx_offset; - volatile struct vlynq_mapping rx_mapping[4]; - volatile u32 chip; - volatile u32 autonego; - volatile u32 unused[6]; - volatile u32 int_device[8]; -} __attribute__ ((packed)); - -#ifdef VLYNQ_DEBUG -static void vlynq_dump_regs(struct vlynq_device *dev) -{ - int i; - printk("VLYNQ local=%p remote=%p\n", dev->local, dev->remote); - for (i = 0; i < 32; i++) { - printk("VLYNQ: local %d: %08x\n", i + 1, ((u32 *)dev->local)[i]); - printk("VLYNQ: remote %d: %08x\n", i + 1, ((u32 *)dev->remote)[i]); - } -} - -static void vlynq_dump_mem(u32 *base, int count) -{ - int i; - for (i = 0; i < (count + 3) / 4; i++) { - if (i % 4 == 0) printk("\nMEM[0x%04x]:", i * 4); - printk(" 0x%08x", *(base + i)); - } - printk("\n"); -} -#endif - -int vlynq_linked(struct vlynq_device *dev) -{ - int i; - for (i = 0; i < 10; i++) - if (dev->local->status & VLYNQ_STATUS_LINK) { - printk("%s: linked\n", dev->dev.bus_id); - return 1; - } else { - mdelay(1); - } - return 0; -} - -static void vlynq_irq_unmask(unsigned int irq) -{ - volatile u32 val; - struct vlynq_device *dev = irq_desc[irq].chip_data; - int virq; - - BUG_ON(!dev); - virq = irq - dev->irq_start; - val = dev->remote->int_device[virq >> 2]; - val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq); - dev->remote->int_device[virq >> 2] = val; -} - -static void vlynq_irq_mask(unsigned int irq) -{ - volatile u32 val; - struct vlynq_device *dev = irq_desc[irq].chip_data; - int virq; - - BUG_ON(!dev); - virq = irq - dev->irq_start; - val = dev->remote->int_device[virq >> 2]; - val &= ~(VINT_ENABLE << VINT_OFFSET(virq)); - dev->remote->int_device[virq >> 2] = val; -} - -static int vlynq_irq_type(unsigned int irq, unsigned int flow_type) -{ - volatile u32 val; - struct vlynq_device *dev = irq_desc[irq].chip_data; - int virq; - - BUG_ON(!dev); - virq = irq - dev->irq_start; - val = dev->remote->int_device[virq >> 2]; - switch (flow_type & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_RISING: - case IRQ_TYPE_EDGE_FALLING: - case IRQ_TYPE_EDGE_BOTH: - val |= VINT_TYPE_EDGE << VINT_OFFSET(virq); - val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); - break; - case IRQ_TYPE_LEVEL_HIGH: - val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); - val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); - break; - case IRQ_TYPE_LEVEL_LOW: - val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); - val |= VINT_LEVEL_LOW << VINT_OFFSET(virq); - break; - default: - return -EINVAL; - } - dev->remote->int_device[virq >> 2] = val; - return 0; -} - -static irqreturn_t vlynq_irq(int irq, void *dev_id) -{ - struct vlynq_device *dev = dev_id; - u32 status, ack; - int virq = 0; - - status = dev->local->int_status; - dev->local->int_status = status; - - if (status & (1 << dev->local_irq)) { /* Local vlynq IRQ. Ack */ - ack = dev->local->status; - dev->local->status = ack; - } - - if (status & (1 << dev->remote_irq)) { /* Remote vlynq IRQ. Ack */ - ack = dev->remote->status; - dev->remote->status = ack; - } - - status &= ~((1 << dev->local_irq) | (1 << dev->remote_irq)); - while (status) { - if (status & 1) /* Remote device IRQ. Pass. */ - do_IRQ(dev->irq_start + virq); - status >>= 1; - virq++; - } - - return IRQ_HANDLED; -} - -static struct irq_chip vlynq_irq_chip = { - .typename = "VLYNQ", - .name = "vlynq", - .unmask = vlynq_irq_unmask, - .mask = vlynq_irq_mask, - .set_type = vlynq_irq_type, -}; - -static int vlynq_setup_irq(struct vlynq_device *dev) -{ - u32 val; - int i; - - if (dev->local_irq == dev->remote_irq) { - printk("%s: local vlynq irq should be different from remote\n", - dev->dev.bus_id); - return -EINVAL; - } - - val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq); - val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL | - VLYNQ_CTRL_INT2CFG; - dev->local->int_ptr = 0x14; - dev->local->control |= val; - - val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq); - val |= VLYNQ_CTRL_INT_ENABLE; - dev->remote->int_ptr = 0x14; - dev->remote->control |= val; - - for (i = 0; i < PER_DEVICE_IRQS; i++) { - if ((i == dev->local_irq) || (i == dev->remote_irq)) - continue; - irq_desc[dev->irq_start + i].status = IRQ_DISABLED; - irq_desc[dev->irq_start + i].action = 0; - irq_desc[dev->irq_start + i].depth = 1; - irq_desc[dev->irq_start + i].chip = &vlynq_irq_chip; - irq_desc[dev->irq_start + i].chip_data = dev; - dev->remote->int_device[i >> 2] = 0; - } - - if (request_irq(dev->irq, vlynq_irq, SA_SHIRQ, "vlynq", dev)) { - printk("%s: request_irq failed\n", dev->dev.bus_id); - return -EAGAIN; - } - - return 0; -} - -static void vlynq_free_irq(struct vlynq_device *dev) -{ - free_irq(dev->irq, dev); -} - -static void vlynq_device_release(struct device *dev) -{ - struct vlynq_device *vdev = to_vlynq_device(dev); - kfree(vdev); -} - -static int vlynq_device_probe(struct device *dev) -{ - struct vlynq_driver *drv = to_vlynq_driver(dev->driver); - if (drv->probe) - return drv->probe(to_vlynq_device(dev)); - return 0; -} - -static int vlynq_device_remove(struct device *dev) -{ - struct vlynq_driver *drv = to_vlynq_driver(dev->driver); - if (drv->remove) - return drv->remove(to_vlynq_device(dev)); - return 0; -} - -int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner) -{ - driver->driver.name = driver->name; - driver->driver.bus = &vlynq_bus_type; -/* driver->driver.owner = owner;*/ - return driver_register(&driver->driver); -} -EXPORT_SYMBOL(__vlynq_register_driver); - -void vlynq_unregister_driver(struct vlynq_driver *driver) -{ - driver_unregister(&driver->driver); -} -EXPORT_SYMBOL(vlynq_unregister_driver); - -int vlynq_device_enable(struct vlynq_device *dev) -{ - u32 div; - int result; - struct plat_vlynq_ops *ops = dev->dev.platform_data; - - result = ops->on(dev); - if (result) - return result; - - dev->local->control = 0; - dev->remote->control = 0; - dev->local->control = VLYNQ_CTRL_CLOCK_INT; - - div = ar7_dsp_freq() / 62500000; - if (div != 0 ) { - if (ar7_dsp_freq() / div != 62500000) { - printk(KERN_WARNING - "VLYNQ: Adjusted requested frequency %d to %d\n", - 62500000, ar7_dsp_freq() / div); - } - - printk("VLYNQ: Setting clock to %d (clock divider %u)\n", - ar7_dsp_freq() / div, div); - dev->local->control |= VLYNQ_CTRL_CLOCK_DIV((div - 1)); - } - if (vlynq_linked(dev)) - return vlynq_setup_irq(dev); - - return -ENODEV; -} - -void vlynq_device_disable(struct vlynq_device *dev) -{ - struct plat_vlynq_ops *ops = dev->dev.platform_data; - - vlynq_free_irq(dev); - ops->off(dev); -} - -u32 vlynq_local_id(struct vlynq_device *dev) -{ - return dev->local->chip; -} - -u32 vlynq_remote_id(struct vlynq_device *dev) -{ - return dev->remote->chip; -} - -void vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset, - struct vlynq_mapping *mapping) -{ - int i; - - dev->local->tx_offset = tx_offset; - for (i = 0; i < 4; i++) { - dev->local->rx_mapping[i].offset = mapping[i].offset; - dev->local->rx_mapping[i].size = mapping[i].size; - } -} - -void vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset, - struct vlynq_mapping *mapping) -{ - int i; - - dev->remote->tx_offset = tx_offset; - for (i = 0; i < 4; i++) { - dev->remote->rx_mapping[i].offset = mapping[i].offset; - dev->remote->rx_mapping[i].size = mapping[i].size; - } -} - -int vlynq_virq_to_irq(struct vlynq_device *dev, int virq) -{ - if ((virq < 0) || (virq >= PER_DEVICE_IRQS)) - return -EINVAL; - - if ((virq == dev->local_irq) || (virq == dev->remote_irq)) - return -EINVAL; - - return dev->irq_start + virq; -} - -int vlynq_irq_to_virq(struct vlynq_device *dev, int irq) -{ - if ((irq < dev->irq_start) || (irq >= dev->irq_start + PER_DEVICE_IRQS)) - return -EINVAL; - - return irq - dev->irq_start; -} - -int vlynq_set_local_irq(struct vlynq_device *dev, int virq) -{ - if ((virq < 0) || (virq >= PER_DEVICE_IRQS)) - return -EINVAL; - - if (virq == dev->remote_irq) - return -EINVAL; - - dev->local_irq = virq; - - return 0; -} - -int vlynq_set_remote_irq(struct vlynq_device *dev, int virq) -{ - if ((virq < 0) || (virq >= PER_DEVICE_IRQS)) - return -EINVAL; - - if (virq == dev->local_irq) - return -EINVAL; - - dev->remote_irq = virq; - - return 0; -} - -static int vlynq_probe(struct platform_device *pdev) -{ - struct vlynq_device *dev; - struct resource *regs_res, *mem_res, *irq_res; - int len, result; - - if (strcmp(pdev->name, "vlynq")) - return -ENODEV; - - regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); - if (!regs_res) - return -ENODEV; - - mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem"); - if (!mem_res) - return -ENODEV; - - irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq"); - if (!irq_res) - return -ENODEV; - - dev = kmalloc(sizeof(struct vlynq_device), GFP_KERNEL); - if (!dev) { - printk(KERN_ERR "vlynq: failed to allocate device structure\n"); - return -ENOMEM; - } - - memset(dev, 0, sizeof(struct vlynq_device)); - - dev->id = pdev->id; - dev->dev.bus = &vlynq_bus_type; - dev->dev.parent = &pdev->dev; - snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id); - dev->dev.bus_id[BUS_ID_SIZE - 1] = 0; - dev->dev.platform_data = pdev->dev.platform_data; - dev->dev.release = vlynq_device_release; - - dev->regs_start = regs_res->start; - dev->regs_end = regs_res->end; - dev->mem_start = mem_res->start; - dev->mem_end = mem_res->end; - - len = regs_res->end - regs_res->start; - if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) { - printk("%s: Can't request vlynq registers\n", dev->dev.bus_id); - result = -ENXIO; - goto fail_request; - } - - dev->local = ioremap_nocache(regs_res->start, len); - if (!dev->local) { - printk("%s: Can't remap vlynq registers\n", dev->dev.bus_id); - result = -ENXIO; - goto fail_remap; - } - - dev->remote = (struct vlynq_regs *)((u32)dev->local + 128); - - dev->irq = platform_get_irq_byname(pdev, "irq"); - dev->irq_start = irq_res->start; - dev->irq_end = irq_res->end; - dev->local_irq = 31; - dev->remote_irq = 30; - - if (device_register(&dev->dev)) - goto fail_register; - platform_set_drvdata(pdev, dev); - - printk("%s: regs 0x%p, irq %d, mem 0x%p\n", - dev->dev.bus_id, (void *)dev->regs_start, dev->irq, - (void *)dev->mem_start); - - return 0; - -fail_register: -fail_remap: - iounmap(dev->local); -fail_request: - release_mem_region(regs_res->start, len); - kfree(dev); - return result; -} - -static int vlynq_remove(struct platform_device *pdev) -{ - struct vlynq_device *dev = platform_get_drvdata(pdev); - - device_unregister(&dev->dev); - release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start); - - kfree(dev); - - return 0; -} - -static struct platform_driver vlynq_driver = { - .driver.name = "vlynq", - .probe = vlynq_probe, - .remove = vlynq_remove, -}; - -struct bus_type vlynq_bus_type = { - .name = "vlynq", - .probe = vlynq_device_probe, - .remove = vlynq_device_remove, -}; -EXPORT_SYMBOL(vlynq_bus_type); - -#ifdef CONFIG_PCI -extern void vlynq_pci_init(void); -#endif -int __init vlynq_init(void) -{ - int res = 0; - - res = bus_register(&vlynq_bus_type); - if (res) - goto fail_bus; - - res = platform_driver_register(&vlynq_driver); - if (res) - goto fail_platform; - -#ifdef CONFIG_PCI - vlynq_pci_init(); -#endif - - return 0; - -fail_platform: - bus_unregister(&vlynq_bus_type); -fail_bus: - return res; -} - -/* -void __devexit vlynq_exit(void) -{ - platform_driver_unregister(&vlynq_driver); - bus_unregister(&vlynq_bus_type); -} -*/ - - -subsys_initcall(vlynq_init); diff --git a/target/linux/ar7-2.6/files/drivers/char/ar7_gpio.c b/target/linux/ar7-2.6/files/drivers/char/ar7_gpio.c deleted file mode 100644 index a5245da356..0000000000 --- a/target/linux/ar7-2.6/files/drivers/char/ar7_gpio.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * linux/drivers/char/ar7_gpio.c - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define DRVNAME "ar7_gpio" -#define LONGNAME "TI AR7 GPIOs Driver" - -MODULE_AUTHOR("Nicolas Thill "); -MODULE_DESCRIPTION(LONGNAME); -MODULE_LICENSE("GPL"); - -static int ar7_gpio_major = 0; - -static ssize_t ar7_gpio_write(struct file *file, const char __user *buf, - size_t len, loff_t *ppos) -{ - int pin = iminor(file->f_dentry->d_inode); - size_t i; - - for (i = 0; i < len; ++i) { - char c; - if (get_user(c, buf + i)) - return -EFAULT; - switch (c) { - case '0': - gpio_set_value(pin, 0); - break; - case '1': - gpio_set_value(pin, 1); - break; - case 'd': - case 'D': - ar7_gpio_disable(pin); - break; - case 'e': - case 'E': - ar7_gpio_enable(pin); - break; - case 'i': - case 'I': - case '<': - gpio_direction_input(pin); - break; - case 'o': - case 'O': - case '>': - gpio_direction_output(pin); - break; - default: - return -EINVAL; - } - } - - return len; -} - -static ssize_t ar7_gpio_read(struct file *file, char __user * buf, - size_t len, loff_t * ppos) -{ - int pin = iminor(file->f_dentry->d_inode); - int value; - - value = gpio_get_value(pin); - if (put_user(value ? '1' : '0', buf)) - return -EFAULT; - - return 1; -} - -static int ar7_gpio_open(struct inode *inode, struct file *file) -{ - int m = iminor(inode); - - if (m >= AR7_GPIO_MAX) - return -EINVAL; - - return nonseekable_open(inode, file); -} - -static int ar7_gpio_release(struct inode *inode, struct file *file) -{ - return 0; -} - -static const struct file_operations ar7_gpio_fops = { - .owner = THIS_MODULE, - .write = ar7_gpio_write, - .read = ar7_gpio_read, - .open = ar7_gpio_open, - .release = ar7_gpio_release, - .llseek = no_llseek, -}; - -static struct platform_device *ar7_gpio_device; - -static int __init ar7_gpio_init(void) -{ - int rc; - - ar7_gpio_device = platform_device_alloc(DRVNAME, -1); - if (!ar7_gpio_device) - return -ENOMEM; - - rc = platform_device_add(ar7_gpio_device); - if (rc < 0) - goto out_put; - - rc = register_chrdev(ar7_gpio_major, DRVNAME, &ar7_gpio_fops); - if (rc < 0) - goto out_put; - - ar7_gpio_major = rc; - - rc = 0; - - goto out; - -out_put: - platform_device_put(ar7_gpio_device); -out: - return rc; -} - -static void __exit ar7_gpio_exit(void) -{ - unregister_chrdev(ar7_gpio_major, DRVNAME); - platform_device_unregister(ar7_gpio_device); -} - -module_init(ar7_gpio_init); -module_exit(ar7_gpio_exit); diff --git a/target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c b/target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c deleted file mode 100644 index 50dfb5ef3c..0000000000 --- a/target/linux/ar7-2.6/files/drivers/char/watchdog/ar7_wdt.c +++ /dev/null @@ -1,345 +0,0 @@ -/* - * linux/drivers/char/ar7_wdt.c - * - * Copyright (C) 2007 OpenWrt.org - * Copyright (c) 2005 Enrik Berkhan - * - * Some code taken from: - * National Semiconductor SCx200 Watchdog support - * Copyright (c) 2001,2002 Christer Weinigel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#define DRVNAME "ar7_wdt" -#define LONGNAME "TI AR7 Watchdog Timer" - -MODULE_AUTHOR("Nicolas Thill "); -MODULE_DESCRIPTION(LONGNAME); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); - -static int margin = 60; -module_param(margin, int, 0); -MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); - -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); - -typedef struct { - u32 kick_lock; - u32 kick; - u32 change_lock; - u32 change ; - u32 disable_lock; - u32 disable; - u32 prescale_lock; - u32 prescale; -} ar7_wdt_t; - -static struct semaphore open_semaphore; -static unsigned expect_close; - -/* XXX currently fixed, allows max margin ~68.72 secs */ -#define prescale_value 0xFFFF - -// Offset of the WDT registers -static unsigned long ar7_regs_wdt; -// Pointer to the remapped WDT IO space -static ar7_wdt_t *ar7_wdt; -static void ar7_wdt_get_regs(void) -{ - u16 chip_id = ar7_chip_id(); - switch (chip_id) - { - case AR7_CHIP_7100: - case AR7_CHIP_7200: - ar7_regs_wdt = AR7_REGS_WDT; - break; - default: - ar7_regs_wdt = UR8_REGS_WDT; - break; - } -} - -static void ar7_wdt_kick(u32 value) -{ - ar7_wdt->kick_lock = 0x5555; - if ((ar7_wdt->kick_lock & 3) == 1) { - ar7_wdt->kick_lock = 0xAAAA; - if ((ar7_wdt->kick_lock & 3) == 3) { - ar7_wdt->kick = value; - return; - } - } - printk(KERN_ERR DRVNAME ": failed to unlock WDT kick reg\n"); -} - -static void ar7_wdt_prescale(u32 value) -{ - ar7_wdt->prescale_lock = 0x5A5A; - if ((ar7_wdt->prescale_lock & 3) == 1) { - ar7_wdt->prescale_lock = 0xA5A5; - if ((ar7_wdt->prescale_lock & 3) == 3) { - ar7_wdt->prescale = value; - return; - } - } - printk(KERN_ERR DRVNAME ": failed to unlock WDT prescale reg\n"); -} - -static void ar7_wdt_change(u32 value) -{ - ar7_wdt->change_lock = 0x6666; - if ((ar7_wdt->change_lock & 3) == 1) { - ar7_wdt->change_lock = 0xBBBB; - if ((ar7_wdt->change_lock & 3) == 3) { - ar7_wdt->change = value; - return; - } - } - printk(KERN_ERR DRVNAME ": failed to unlock WDT change reg\n"); -} - -static void ar7_wdt_disable(u32 value) -{ - ar7_wdt->disable_lock = 0x7777; - if ((ar7_wdt->disable_lock & 3) == 1) { - ar7_wdt->disable_lock = 0xCCCC; - if ((ar7_wdt->disable_lock & 3) == 2) { - ar7_wdt->disable_lock = 0xDDDD; - if ((ar7_wdt->disable_lock & 3) == 3) { - ar7_wdt->disable = value; - return; - } - } - } - printk(KERN_ERR DRVNAME ": failed to unlock WDT disable reg\n"); -} - -static void ar7_wdt_update_margin(int new_margin) -{ - u32 change; - - change = new_margin * (ar7_vbus_freq() / prescale_value); - if (change < 1) change = 1; - if (change > 0xFFFF) change = 0xFFFF; - ar7_wdt_change(change); - margin = change * prescale_value / ar7_vbus_freq(); - printk(KERN_INFO DRVNAME - ": timer margin %d seconds (prescale %d, change %d, freq %d)\n", - margin, prescale_value, change, ar7_vbus_freq()); -} - -static void ar7_wdt_enable_wdt(void) -{ - printk(KERN_DEBUG DRVNAME ": enabling watchdog timer\n"); - ar7_wdt_disable(1); - ar7_wdt_kick(1); -} - -static void ar7_wdt_disable_wdt(void) -{ - printk(KERN_DEBUG DRVNAME ": disabling watchdog timer\n"); - ar7_wdt_disable(0); -} - -static int ar7_wdt_open(struct inode *inode, struct file *file) -{ - /* only allow one at a time */ - if (down_trylock(&open_semaphore)) - return -EBUSY; - ar7_wdt_enable_wdt(); - expect_close = 0; - - return 0; -} - -static int ar7_wdt_release(struct inode *inode, struct file *file) -{ - if (!expect_close) { - printk(KERN_WARNING DRVNAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n"); - } else if (!nowayout) { - ar7_wdt_disable_wdt(); - } - up(&open_semaphore); - - return 0; -} - -static int ar7_wdt_notify_sys(struct notifier_block *this, - unsigned long code, void *unused) -{ - if (code == SYS_HALT || code == SYS_POWER_OFF) - if (!nowayout) - ar7_wdt_disable_wdt(); - - return NOTIFY_DONE; -} - -static struct notifier_block ar7_wdt_notifier = -{ - .notifier_call = ar7_wdt_notify_sys -}; - -static ssize_t ar7_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) -{ - if (ppos != &file->f_pos) - return -ESPIPE; - - /* check for a magic close character */ - if (len) { - size_t i; - - ar7_wdt_kick(1); - - expect_close = 0; - for (i = 0; i < len; ++i) { - char c; - if (get_user(c, data+i)) - return -EFAULT; - if (c == 'V') - expect_close = 1; - } - - } - return len; -} - -static int ar7_wdt_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) -{ - static struct watchdog_info ident = { - .identity = LONGNAME, - .firmware_version = 1, - .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING), - }; - int new_margin; - - switch (cmd) { - default: - return -ENOTTY; - case WDIOC_GETSUPPORT: - if(copy_to_user((struct watchdog_info *)arg, &ident, - sizeof(ident))) - return -EFAULT; - return 0; - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - if (put_user(0, (int *)arg)) - return -EFAULT; - return 0; - case WDIOC_KEEPALIVE: - ar7_wdt_kick(1); - return 0; - case WDIOC_SETTIMEOUT: - if (get_user(new_margin, (int *)arg)) - return -EFAULT; - if (new_margin < 1) - return -EINVAL; - - ar7_wdt_update_margin(new_margin); - ar7_wdt_kick(1); - - case WDIOC_GETTIMEOUT: - if (put_user(margin, (int *)arg)) - return -EFAULT; - return 0; - } -} - -static struct file_operations ar7_wdt_fops = { - .owner = THIS_MODULE, - .write = ar7_wdt_write, - .ioctl = ar7_wdt_ioctl, - .open = ar7_wdt_open, - .release = ar7_wdt_release, -}; - -static struct miscdevice ar7_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &ar7_wdt_fops, -}; - -static int __init ar7_wdt_init(void) -{ - int rc; - - ar7_wdt_get_regs(); - - if (!request_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t), LONGNAME)) { - printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n"); - return -EBUSY; - } - - ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t)); - - ar7_wdt_disable_wdt(); - ar7_wdt_prescale(prescale_value); - ar7_wdt_update_margin(margin); - - sema_init(&open_semaphore, 1); - - rc = misc_register(&ar7_wdt_miscdev); - if (rc) { - printk(KERN_ERR DRVNAME ": unable to register misc device\n"); - goto out_alloc; - } - - rc = register_reboot_notifier(&ar7_wdt_notifier); - if (rc) { - printk(KERN_ERR DRVNAME ": unable to register reboot notifier\n"); - goto out_register; - } - goto out; - -out_register: - misc_deregister(&ar7_wdt_miscdev); -out_alloc: - release_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t)); -out: - return rc; -} - -static void __exit ar7_wdt_cleanup(void) -{ - unregister_reboot_notifier(&ar7_wdt_notifier); - misc_deregister(&ar7_wdt_miscdev); - iounmap(ar7_wdt); - release_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t)); -} - -module_init(ar7_wdt_init); -module_exit(ar7_wdt_cleanup); diff --git a/target/linux/ar7-2.6/files/drivers/leds/leds-ar7.c b/target/linux/ar7-2.6/files/drivers/leds/leds-ar7.c deleted file mode 100644 index 85533dee12..0000000000 --- a/target/linux/ar7-2.6/files/drivers/leds/leds-ar7.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * linux/drivers/leds/leds-ar7.c - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#include -#include -#include -#include -#include -#include -#include - -#define DRVNAME "ar7-leds" -#define LONGNAME "TI AR7 LEDs driver" -#define AR7_GPIO_BIT_STATUS_LED 8 - -MODULE_AUTHOR("Nicolas Thill "); -MODULE_DESCRIPTION(LONGNAME); -MODULE_LICENSE("GPL"); - -static void ar7_status_led_set(struct led_classdev *pled, - enum led_brightness value) -{ - gpio_set_value(AR7_GPIO_BIT_STATUS_LED, value ? 0 : 1); -} - -static struct led_classdev ar7_status_led = { - .name = "ar7:status", - .brightness_set = ar7_status_led_set, -}; - -#ifdef CONFIG_PM -static int ar7_leds_suspend(struct platform_device *dev, - pm_message_t state) -{ - led_classdev_suspend(&ar7_status_led); - return 0; -} - -static int ar7_leds_resume(struct platform_device *dev) -{ - led_classdev_resume(&ar7_status_led); - return 0; -} -#else /* CONFIG_PM */ -#define ar7_leds_suspend NULL -#define ar7_leds_resume NULL -#endif /* CONFIG_PM */ - -static int ar7_leds_probe(struct platform_device *pdev) -{ - int rc; - - rc = led_classdev_register(&pdev->dev, &ar7_status_led); - if (rc < 0 ) - goto out; - - ar7_gpio_enable(AR7_GPIO_BIT_STATUS_LED); - gpio_direction_output(AR7_GPIO_BIT_STATUS_LED); - -out: - return rc; -} - -static int ar7_leds_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&ar7_status_led); - - return 0; -} - -static struct platform_device *ar7_leds_device; - -static struct platform_driver ar7_leds_driver = { - .probe = ar7_leds_probe, - .remove = ar7_leds_remove, - .suspend = ar7_leds_suspend, - .resume = ar7_leds_resume, - .driver = { - .name = DRVNAME, - }, -}; - -static int __init ar7_leds_init(void) -{ - int rc; - - ar7_leds_device = platform_device_alloc(DRVNAME, -1); - if (!ar7_leds_device) - return -ENOMEM; - - rc = platform_device_add(ar7_leds_device); - if (rc < 0) - goto out_put; - - rc = platform_driver_register(&ar7_leds_driver); - if (rc < 0) - goto out_put; - - goto out; - -out_put: - platform_device_put(ar7_leds_device); -out: - return rc; -} - -static void __exit ar7_leds_exit(void) -{ - platform_driver_unregister(&ar7_leds_driver); - platform_device_unregister(ar7_leds_device); -} - -module_init(ar7_leds_init); -module_exit(ar7_leds_exit); diff --git a/target/linux/ar7-2.6/files/drivers/mtd/ar7part.c b/target/linux/ar7-2.6/files/drivers/mtd/ar7part.c deleted file mode 100644 index 587bb31bb2..0000000000 --- a/target/linux/ar7-2.6/files/drivers/mtd/ar7part.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * TI AR7 flash partition table. - * Based on ar7 map by Felix Fietkau. - * - */ - -#include -#include - -#include -#include -#include -#include - -struct ar7_bin_rec { - unsigned int checksum; - unsigned int length; - unsigned int address; -}; - -static struct mtd_partition ar7_parts[5]; - -static int create_mtd_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long origin) -{ - struct ar7_bin_rec header; - unsigned int offset, len; - unsigned int pre_size = master->erasesize, post_size = 0, - root_offset = 0xe0000; - int retries = 10; - - printk("Parsing AR7 partition map...\n"); - - ar7_parts[0].name = "loader"; - ar7_parts[0].offset = 0; - ar7_parts[0].size = master->erasesize; - ar7_parts[0].mask_flags = MTD_WRITEABLE; - - ar7_parts[1].name = "config"; - ar7_parts[1].offset = 0; - ar7_parts[1].size = master->erasesize; - ar7_parts[1].mask_flags = 0; - - do { - offset = pre_size; - master->read(master, offset, sizeof(header), &len, (u_char *)&header); - if (!strncmp((char *)&header, "TIENV0.8", 8)) - ar7_parts[1].offset = pre_size; - if (header.checksum == 0xfeedfa42) - break; - if (header.checksum == 0xfeed1281) - break; - pre_size += master->erasesize; - } while (retries--); - - pre_size = offset; - - if (!ar7_parts[1].offset) { - ar7_parts[1].offset = master->size - master->erasesize; - post_size = master->erasesize; - } - - switch (header.checksum) { - case 0xfeedfa42: - while (header.length) { - offset += sizeof(header) + header.length; - master->read(master, offset, sizeof(header), - &len, (u_char *)&header); - } - root_offset = offset + sizeof(header) + 4; - break; - case 0xfeed1281: - while (header.length) { - offset += sizeof(header) + header.length; - master->read(master, offset, sizeof(header), - &len, (u_char *)&header); - } - root_offset = offset + sizeof(header) + 4 + 0xff; - root_offset &= ~(u32)0xff; - break; - default: - printk("Unknown magic: %08x\n", header.checksum); - break; - } - - master->read(master, root_offset, sizeof(header), &len, (u_char *)&header); - if (header.checksum != SQUASHFS_MAGIC) { - root_offset += master->erasesize - 1; - root_offset &= ~(master->erasesize - 1); - } - - ar7_parts[2].name = "linux"; - ar7_parts[2].offset = pre_size; - ar7_parts[2].size = master->size - pre_size - post_size; - ar7_parts[2].mask_flags = 0; - - ar7_parts[3].name = "rootfs"; - ar7_parts[3].offset = root_offset; - ar7_parts[3].size = master->size - root_offset - post_size; - ar7_parts[3].mask_flags = 0; - - *pparts = ar7_parts; - return 4; -} - -static struct mtd_part_parser ar7_parser = { - .owner = THIS_MODULE, - .parse_fn = create_mtd_partitions, - .name = "ar7part", -}; - -static int __init ar7_parser_init(void) -{ - return register_mtd_parser(&ar7_parser); -} - -module_init(ar7_parser_init); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Felix Fietkau, Eugene Konev"); -MODULE_DESCRIPTION("MTD partitioning for TI AR7"); diff --git a/target/linux/ar7-2.6/files/drivers/net/cpmac.c b/target/linux/ar7-2.6/files/drivers/net/cpmac.c deleted file mode 100644 index 7d46677080..0000000000 --- a/target/linux/ar7-2.6/files/drivers/net/cpmac.c +++ /dev/null @@ -1,1222 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include -#include -#include - -#include -#include /* printk() */ -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -MODULE_AUTHOR("Eugene Konev"); -MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)"); -MODULE_LICENSE("GPL"); - -static int rx_ring_size = 64; -static int disable_napi = 0; -module_param(rx_ring_size, int, 64); -module_param(disable_napi, int, 0); -MODULE_PARM_DESC(rx_ring_size, "Size of rx ring (in skbs)"); -MODULE_PARM_DESC(disable_napi, "Disable NAPI polling"); - -/* Register definitions */ -struct cpmac_control_regs { - volatile u32 revision; - volatile u32 control; - volatile u32 teardown; - volatile u32 unused; -} __attribute__ ((packed)); - -struct cpmac_int_regs { - volatile u32 stat_raw; - volatile u32 stat_masked; - volatile u32 enable; - volatile u32 clear; -} __attribute__ ((packed)); - -struct cpmac_stats { - volatile u32 good; - volatile u32 bcast; - volatile u32 mcast; - volatile u32 pause; - volatile u32 crc_error; - volatile u32 align_error; - volatile u32 oversized; - volatile u32 jabber; - volatile u32 undersized; - volatile u32 fragment; - volatile u32 filtered; - volatile u32 qos_filtered; - volatile u32 octets; -} __attribute__ ((packed)); - -struct cpmac_regs { - struct cpmac_control_regs tx_ctrl; - struct cpmac_control_regs rx_ctrl; - volatile u32 unused1[56]; - volatile u32 mbp; -/* MBP bits */ -#define MBP_RXPASSCRC 0x40000000 -#define MBP_RXQOS 0x20000000 -#define MBP_RXNOCHAIN 0x10000000 -#define MBP_RXCMF 0x01000000 -#define MBP_RXSHORT 0x00800000 -#define MBP_RXCEF 0x00400000 -#define MBP_RXPROMISC 0x00200000 -#define MBP_PROMISCCHAN(chan) (((chan) & 0x7) << 16) -#define MBP_RXBCAST 0x00002000 -#define MBP_BCASTCHAN(chan) (((chan) & 0x7) << 8) -#define MBP_RXMCAST 0x00000020 -#define MBP_MCASTCHAN(chan) ((chan) & 0x7) - volatile u32 unicast_enable; - volatile u32 unicast_clear; - volatile u32 max_len; - volatile u32 buffer_offset; - volatile u32 filter_flow_threshold; - volatile u32 unused2[2]; - volatile u32 flow_thre[8]; - volatile u32 free_buffer[8]; - volatile u32 mac_control; -#define MAC_TXPTYPE 0x00000200 -#define MAC_TXPACE 0x00000040 -#define MAC_MII 0x00000020 -#define MAC_TXFLOW 0x00000010 -#define MAC_RXFLOW 0x00000008 -#define MAC_MTEST 0x00000004 -#define MAC_LOOPBACK 0x00000002 -#define MAC_FDX 0x00000001 - volatile u32 mac_status; -#define MACST_QOS 0x4 -#define MACST_RXFLOW 0x2 -#define MACST_TXFLOW 0x1 - volatile u32 emc_control; - volatile u32 unused3; - struct cpmac_int_regs tx_int; - volatile u32 mac_int_vector; -/* Int Status bits */ -#define INTST_STATUS 0x80000 -#define INTST_HOST 0x40000 -#define INTST_RX 0x20000 -#define INTST_TX 0x10000 - volatile u32 mac_eoi_vector; - volatile u32 unused4[2]; - struct cpmac_int_regs rx_int; - volatile u32 mac_int_stat_raw; - volatile u32 mac_int_stat_masked; - volatile u32 mac_int_enable; - volatile u32 mac_int_clear; - volatile u32 mac_addr_low[8]; - volatile u32 mac_addr_mid; - volatile u32 mac_addr_high; - volatile u32 mac_hash_low; - volatile u32 mac_hash_high; - volatile u32 boff_test; - volatile u32 pac_test; - volatile u32 rx_pause; - volatile u32 tx_pause; - volatile u32 unused5[2]; - struct cpmac_stats rx_stats; - struct cpmac_stats tx_stats; - volatile u32 unused6[232]; - volatile u32 tx_ptr[8]; - volatile u32 rx_ptr[8]; - volatile u32 tx_ack[8]; - volatile u32 rx_ack[8]; - -} __attribute__ ((packed)); - -struct cpmac_mdio_regs { - volatile u32 version; - volatile u32 control; -#define MDIOC_IDLE 0x80000000 -#define MDIOC_ENABLE 0x40000000 -#define MDIOC_PREAMBLE 0x00100000 -#define MDIOC_FAULT 0x00080000 -#define MDIOC_FAULTDETECT 0x00040000 -#define MDIOC_INTTEST 0x00020000 -#define MDIOC_CLKDIV(div) ((div) & 0xff) - volatile u32 alive; - volatile u32 link; - struct cpmac_int_regs link_int; - struct cpmac_int_regs user_int; - u32 unused[20]; - volatile u32 access; -#define MDIO_BUSY 0x80000000 -#define MDIO_WRITE 0x40000000 -#define MDIO_REG(reg) (((reg) & 0x1f) << 21) -#define MDIO_PHY(phy) (((phy) & 0x1f) << 16) -#define MDIO_DATA(data) ((data) & 0xffff) - volatile u32 physel; -} __attribute__ ((packed)); - -/* Descriptor */ -struct cpmac_desc { - u32 hw_next; - u32 hw_data; - u16 buflen; - u16 bufflags; - u16 datalen; - u16 dataflags; -/* Flags bits */ -#define CPMAC_SOP 0x8000 -#define CPMAC_EOP 0x4000 -#define CPMAC_OWN 0x2000 -#define CPMAC_EOQ 0x1000 - struct sk_buff *skb; - struct cpmac_desc *next; -} __attribute__ ((packed)); - -struct cpmac_priv { - struct net_device_stats stats; - spinlock_t lock; - struct sk_buff *skb_pool; - int free_skbs; - struct cpmac_desc *rx_head; - int tx_head, tx_tail; - struct cpmac_desc *desc_ring; - struct cpmac_regs *regs; - struct mii_bus *mii_bus; - struct phy_device *phy; - char phy_name[BUS_ID_SIZE]; - struct plat_cpmac_data *config; - int oldlink, oldspeed, oldduplex; - u32 msg_enable; - struct net_device *dev; - struct work_struct alloc_work; -}; - -static irqreturn_t cpmac_irq(int, void *); -static void cpmac_reset(struct net_device *dev); -static void cpmac_hw_init(struct net_device *dev); -static int cpmac_stop(struct net_device *dev); -static int cpmac_open(struct net_device *dev); - -#undef CPMAC_DEBUG -#define CPMAC_LOW_THRESH 32 -#define CPMAC_ALLOC_SIZE 64 -#define CPMAC_SKB_SIZE 1518 -#define CPMAC_TX_RING_SIZE 8 - -#ifdef CPMAC_DEBUG -static void cpmac_dump_regs(u32 *base, int count) -{ - int i; - for (i = 0; i < (count + 3) / 4; i++) { - if (i % 4 == 0) printk("\nCPMAC[0x%04x]:", i * 4); - printk(" 0x%08x", *(base + i)); - } - printk("\n"); -} - -static const char *cpmac_dump_buf(const uint8_t * buf, unsigned size) -{ - static char buffer[3 * 25 + 1]; - char *p = &buffer[0]; - if (size > 20) - size = 20; - while (size-- > 0) { - p += sprintf(p, " %02x", *buf++); - } - return buffer; -} -#endif - -static int cpmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum) -{ - struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv; - volatile u32 val; - - while ((val = regs->access) & MDIO_BUSY); - regs->access = MDIO_BUSY | MDIO_REG(regnum & 0x1f) | - MDIO_PHY(phy_id & 0x1f); - while ((val = regs->access) & MDIO_BUSY); - - return val & 0xffff; -} - -static int cpmac_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 val) -{ - struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv; - volatile u32 tmp; - - while ((tmp = regs->access) & MDIO_BUSY); - regs->access = MDIO_BUSY | MDIO_WRITE | - MDIO_REG(regnum & 0x1f) | MDIO_PHY(phy_id & 0x1f) | - val; - - return 0; -} - -static int cpmac_mdio_reset(struct mii_bus *bus) -{ - struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv; - - ar7_device_reset(AR7_RESET_BIT_MDIO); - regs->control = MDIOC_ENABLE | - MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1); - - return 0; -} - -static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, }; - -static struct mii_bus cpmac_mii = { - .name = "cpmac-mii", - .read = cpmac_mdio_read, - .write = cpmac_mdio_write, - .reset = cpmac_mdio_reset, - .irq = mii_irqs, -}; - -static int cpmac_config(struct net_device *dev, struct ifmap *map) -{ - if (dev->flags & IFF_UP) - return -EBUSY; - - /* Don't allow changing the I/O address */ - if (map->base_addr != dev->base_addr) - return -EOPNOTSUPP; - - /* ignore other fields */ - return 0; -} - -static int cpmac_set_mac_address(struct net_device *dev, void *addr) -{ - struct sockaddr *sa = addr; - - if (dev->flags & IFF_UP) - return -EBUSY; - - memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); - - return 0; -} - -static void cpmac_set_multicast_list(struct net_device *dev) -{ - struct dev_mc_list *iter; - int i; - int hash, tmp; - int hashlo = 0, hashhi = 0; - struct cpmac_priv *priv = netdev_priv(dev); - - if(dev->flags & IFF_PROMISC) { - priv->regs->mbp &= ~MBP_PROMISCCHAN(0); /* promisc channel 0 */ - priv->regs->mbp |= MBP_RXPROMISC; - } else { - priv->regs->mbp &= ~MBP_RXPROMISC; - if(dev->flags & IFF_ALLMULTI) { - /* enable all multicast mode */ - priv->regs->mac_hash_low = 0xffffffff; - priv->regs->mac_hash_high = 0xffffffff; - } else { - for(i = 0, iter = dev->mc_list; i < dev->mc_count; - i++, iter = iter->next) { - hash = 0; - tmp = iter->dmi_addr[0]; - hash ^= (tmp >> 2) ^ (tmp << 4); - tmp = iter->dmi_addr[1]; - hash ^= (tmp >> 4) ^ (tmp << 2); - tmp = iter->dmi_addr[2]; - hash ^= (tmp >> 6) ^ tmp; - tmp = iter->dmi_addr[4]; - hash ^= (tmp >> 2) ^ (tmp << 4); - tmp = iter->dmi_addr[5]; - hash ^= (tmp >> 4) ^ (tmp << 2); - tmp = iter->dmi_addr[6]; - hash ^= (tmp >> 6) ^ tmp; - hash &= 0x3f; - if(hash < 32) { - hashlo |= 1<regs->mac_hash_low = hashlo; - priv->regs->mac_hash_high = hashhi; - } - } -} - -static struct sk_buff *cpmac_get_skb(struct net_device *dev) -{ - struct sk_buff *skb; - struct cpmac_priv *priv = netdev_priv(dev); - - skb = priv->skb_pool; - if (likely(skb)) { - priv->skb_pool = skb->next; - } else { - skb = dev_alloc_skb(CPMAC_SKB_SIZE + 2); - if (skb) { - skb->next = NULL; - skb_reserve(skb, 2); - skb->dev = priv->dev; - } - } - - if (likely(priv->free_skbs)) - priv->free_skbs--; - - if (priv->free_skbs < CPMAC_LOW_THRESH) - schedule_work(&priv->alloc_work); - - return skb; -} - -static inline struct sk_buff *cpmac_rx_one(struct net_device *dev, - struct cpmac_priv *priv, - struct cpmac_desc *desc) -{ - unsigned long flags; - char *data; - struct sk_buff *skb, *result = NULL; - - priv->regs->rx_ack[0] = virt_to_phys(desc); - if (unlikely(!desc->datalen)) { - if (printk_ratelimit()) - printk(KERN_WARNING "%s: rx: spurious interrupt\n", - dev->name); - priv->stats.rx_errors++; - return NULL; - } - - spin_lock_irqsave(&priv->lock, flags); - skb = cpmac_get_skb(dev); - if (likely(skb)) { - data = (char *)phys_to_virt(desc->hw_data); - dma_cache_inv((u32)data, desc->datalen); - skb_put(desc->skb, desc->datalen); - desc->skb->protocol = eth_type_trans(desc->skb, dev); - desc->skb->ip_summed = CHECKSUM_NONE; - priv->stats.rx_packets++; - priv->stats.rx_bytes += desc->datalen; - result = desc->skb; - desc->skb = skb; - } else { -#ifdef CPMAC_DEBUG - if (printk_ratelimit()) - printk("%s: low on skbs, dropping packet\n", - dev->name); -#endif - priv->stats.rx_dropped++; - } - spin_unlock_irqrestore(&priv->lock, flags); - - desc->hw_data = virt_to_phys(desc->skb->data); - desc->buflen = CPMAC_SKB_SIZE; - desc->dataflags = CPMAC_OWN; - dma_cache_wback((u32)desc, 16); - - return result; -} - -static void cpmac_rx(struct net_device *dev) -{ - struct sk_buff *skb; - struct cpmac_desc *desc; - struct cpmac_priv *priv = netdev_priv(dev); - - spin_lock(&priv->lock); - if (unlikely(!priv->rx_head)) { - spin_unlock(&priv->lock); - return; - } - - desc = priv->rx_head; - dma_cache_inv((u32)desc, 16); -#ifdef CPMAC_DEBUG - printk(KERN_DEBUG "%s: len=%d, %s\n", __func__, pkt->datalen, - cpmac_dump_buf(data, pkt->datalen)); -#endif - - while ((desc->dataflags & CPMAC_OWN) == 0) { - skb = cpmac_rx_one(dev, priv, desc); - if (likely(skb)) { - netif_rx(skb); - } - desc = desc->next; - dma_cache_inv((u32)desc, 16); - } - - priv->rx_head = desc; - priv->regs->rx_ptr[0] = virt_to_phys(desc); - spin_unlock(&priv->lock); -} - -static int cpmac_poll(struct net_device *dev, int *budget) -{ - struct sk_buff *skb; - struct cpmac_desc *desc; - int received = 0, quota = min(dev->quota, *budget); - struct cpmac_priv *priv = netdev_priv(dev); - - if (unlikely(!priv->rx_head)) { - if (printk_ratelimit()) - printk(KERN_WARNING "%s: rx: polling, but no queue\n", - dev->name); - netif_rx_complete(dev); - return 0; - } - - desc = priv->rx_head; - dma_cache_inv((u32)desc, 16); - - while ((received < quota) && ((desc->dataflags & CPMAC_OWN) == 0)) { - skb = cpmac_rx_one(dev, priv, desc); - if (likely(skb)) { - netif_receive_skb(skb); - received++; - } - desc = desc->next; - priv->rx_head = desc; - dma_cache_inv((u32)desc, 16); - } - - *budget -= received; - dev->quota -= received; -#ifdef CPMAC_DEBUG - printk("%s: processed %d packets\n", dev->name, received); -#endif - if (desc->dataflags & CPMAC_OWN) { - priv->regs->rx_ptr[0] = virt_to_phys(desc); - netif_rx_complete(dev); - priv->regs->rx_int.enable = 0x1; - priv->regs->rx_int.clear = 0xfe; - return 0; - } - - return 1; -} - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) -static void -cpmac_alloc_skbs(struct work_struct *work) -{ - struct cpmac_priv *priv = container_of(work, struct cpmac_priv, - alloc_work); -#else -static void -cpmac_alloc_skbs(void *data) -{ - struct net_device *dev = (struct net_device*)data; - struct cpmac_priv *priv = netdev_priv(dev); -#endif - unsigned long flags; - int i, num_skbs = 0; - struct sk_buff *skb, *skbs = NULL; - - for (i = 0; i < CPMAC_ALLOC_SIZE; i++) { - skb = alloc_skb(CPMAC_SKB_SIZE + 2, GFP_KERNEL); - if (!skb) - break; - skb->next = skbs; - skb_reserve(skb, 2); - skb->dev = priv->dev; - num_skbs++; - skbs = skb; - } - - if (skbs) { - spin_lock_irqsave(&priv->lock, flags); - for (skb = priv->skb_pool; skb && skb->next; skb = skb->next); - if (!skb) { - priv->skb_pool = skbs; - } else { - skb->next = skbs; - } - priv->free_skbs += num_skbs; - spin_unlock_irqrestore(&priv->lock, flags); -#ifdef CPMAC_DEBUG - printk("%s: allocated %d skbs\n", priv->dev->name, num_skbs); -#endif - } -} - -static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - unsigned long flags; - int len, chan; - struct cpmac_desc *desc; - struct cpmac_priv *priv = netdev_priv(dev); - - len = skb->len; -#ifdef CPMAC_DEBUG - printk(KERN_DEBUG "%s: len=%d\n", __func__, len); //cpmac_dump_buf(const uint8_t * buf, unsigned size) -#endif - if (unlikely(len < ETH_ZLEN)) { - if (unlikely(skb_padto(skb, ETH_ZLEN))) { - if (printk_ratelimit()) - printk(KERN_NOTICE "%s: padding failed, dropping\n", - dev->name); - spin_lock_irqsave(&priv->lock, flags); - priv->stats.tx_dropped++; - spin_unlock_irqrestore(&priv->lock, flags); - return -ENOMEM; - } - len = ETH_ZLEN; - } - spin_lock_irqsave(&priv->lock, flags); - chan = priv->tx_tail++; - priv->tx_tail %= 8; - if (priv->tx_tail == priv->tx_head) - netif_stop_queue(dev); - - desc = &priv->desc_ring[chan]; - dma_cache_inv((u32)desc, 16); - if (desc->dataflags & CPMAC_OWN) { - printk(KERN_NOTICE "%s: tx dma ring full, dropping\n", dev->name); - priv->stats.tx_dropped++; - spin_unlock_irqrestore(&priv->lock, flags); - return -ENOMEM; - } - - dev->trans_start = jiffies; - desc->dataflags = CPMAC_SOP | CPMAC_EOP | CPMAC_OWN; - desc->skb = skb; - desc->hw_data = virt_to_phys(skb->data); - dma_cache_wback((u32)skb->data, len); - desc->buflen = len; - desc->datalen = len; - desc->hw_next = 0; - dma_cache_wback((u32)desc, 16); - priv->regs->tx_ptr[chan] = virt_to_phys(desc); - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static void cpmac_end_xmit(struct net_device *dev, int channel) -{ - struct cpmac_desc *desc; - struct cpmac_priv *priv = netdev_priv(dev); - - spin_lock(&priv->lock); - desc = &priv->desc_ring[channel]; - priv->regs->tx_ack[channel] = virt_to_phys(desc); - if (likely(desc->skb)) { - priv->stats.tx_packets++; - priv->stats.tx_bytes += desc->skb->len; - dev_kfree_skb_irq(desc->skb); - if (netif_queue_stopped(dev)) - netif_wake_queue(dev); - } else { - if (printk_ratelimit()) - printk(KERN_NOTICE "%s: end_xmit: spurious interrupt\n", - dev->name); - } - spin_unlock(&priv->lock); -} - -static void cpmac_reset(struct net_device *dev) -{ - int i; - struct cpmac_priv *priv = netdev_priv(dev); - - ar7_device_reset(priv->config->reset_bit); - priv->regs->rx_ctrl.control &= ~1; - priv->regs->tx_ctrl.control &= ~1; - for (i = 0; i < 8; i++) { - priv->regs->tx_ptr[i] = 0; - priv->regs->rx_ptr[i] = 0; - } - priv->regs->mac_control &= ~MAC_MII; /* disable mii */ -} - -static inline void cpmac_free_rx_ring(struct net_device *dev) -{ - struct cpmac_desc *desc; - int i; - struct cpmac_priv *priv = netdev_priv(dev); - - if (unlikely(!priv->rx_head)) - return; - - desc = priv->rx_head; - dma_cache_inv((u32)desc, 16); - - for (i = 0; i < rx_ring_size; i++) { - desc->buflen = CPMAC_SKB_SIZE; - if ((desc->dataflags & CPMAC_OWN) == 0) { - desc->dataflags = CPMAC_OWN; - priv->stats.rx_dropped++; - } - dma_cache_wback((u32)desc, 16); - desc = desc->next; - dma_cache_inv((u32)desc, 16); - } -} - -static irqreturn_t cpmac_irq(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *)dev_id; - struct cpmac_priv *priv = netdev_priv(dev); - u32 status; - - if (!dev) - return IRQ_NONE; - - status = priv->regs->mac_int_vector; - - if (status & INTST_TX) { - cpmac_end_xmit(dev, (status & 7)); - } - - if (status & INTST_RX) { - if (disable_napi) { - cpmac_rx(dev); - } else { - priv->regs->rx_int.enable = 0; - priv->regs->rx_int.clear = 0xff; - netif_rx_schedule(dev); - } - } - - priv->regs->mac_eoi_vector = 0; - - if (unlikely(status & (INTST_HOST | INTST_STATUS))) { - if (printk_ratelimit()) { - printk(KERN_ERR "%s: hw error, resetting...\n", dev->name); - } - spin_lock(&priv->lock); - phy_stop(priv->phy); - cpmac_reset(dev); - cpmac_free_rx_ring(dev); - cpmac_hw_init(dev); - spin_unlock(&priv->lock); - } - - return IRQ_HANDLED; -} - -static void cpmac_tx_timeout(struct net_device *dev) -{ - struct cpmac_priv *priv = netdev_priv(dev); - struct cpmac_desc *desc; - - priv->stats.tx_errors++; - desc = &priv->desc_ring[priv->tx_head++]; - priv->tx_head %= 8; - printk("%s: transmit timeout\n", dev->name); - if (desc->skb) - dev_kfree_skb(desc->skb); - netif_wake_queue(dev); -} - -static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct cpmac_priv *priv = netdev_priv(dev); - if (!(netif_running(dev))) - return -EINVAL; - if (!priv->phy) - return -EINVAL; - if ((cmd == SIOCGMIIPHY) || (cmd == SIOCGMIIREG) || - (cmd == SIOCSMIIREG)) - return phy_mii_ioctl(priv->phy, if_mii(ifr), cmd); - - return -EINVAL; -} - -static int cpmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct cpmac_priv *priv = netdev_priv(dev); - - if (priv->phy) - return phy_ethtool_gset(priv->phy, cmd); - - return -EINVAL; -} - -static int cpmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) -{ - struct cpmac_priv *priv = netdev_priv(dev); - - if (!capable(CAP_NET_ADMIN)) - return -EPERM; - - if (priv->phy) - return phy_ethtool_sset(priv->phy, cmd); - - return -EINVAL; -} - -static void cpmac_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, "cpmac"); - strcpy(info->version, "0.0.3"); - info->fw_version[0] = '\0'; - sprintf(info->bus_info, "%s", "cpmac"); - info->regdump_len = 0; -} - -static const struct ethtool_ops cpmac_ethtool_ops = { - .get_settings = cpmac_get_settings, - .set_settings = cpmac_set_settings, - .get_drvinfo = cpmac_get_drvinfo, - .get_link = ethtool_op_get_link, -}; - -static struct net_device_stats *cpmac_stats(struct net_device *dev) -{ - struct cpmac_priv *priv = netdev_priv(dev); - - if (netif_device_present(dev)) - return &priv->stats; - - return NULL; -} - -static int cpmac_change_mtu(struct net_device *dev, int mtu) -{ - unsigned long flags; - struct cpmac_priv *priv = netdev_priv(dev); - spinlock_t *lock = &priv->lock; - - if ((mtu < 68) || (mtu > 1500)) - return -EINVAL; - - spin_lock_irqsave(lock, flags); - dev->mtu = mtu; - spin_unlock_irqrestore(lock, flags); - - return 0; -} - -static void cpmac_adjust_link(struct net_device *dev) -{ - struct cpmac_priv *priv = netdev_priv(dev); - unsigned long flags; - int new_state = 0; - - spin_lock_irqsave(&priv->lock, flags); - if (priv->phy->link) { - if (priv->phy->duplex != priv->oldduplex) { - new_state = 1; - priv->oldduplex = priv->phy->duplex; - } - - if (priv->phy->speed != priv->oldspeed) { - new_state = 1; - priv->oldspeed = priv->phy->speed; - } - - if (!priv->oldlink) { - new_state = 1; - priv->oldlink = 1; - netif_schedule(dev); - } - } else if (priv->oldlink) { - new_state = 1; - priv->oldlink = 0; - priv->oldspeed = 0; - priv->oldduplex = -1; - } - - if (new_state) - phy_print_status(priv->phy); - - spin_unlock_irqrestore(&priv->lock, flags); -} - -static void cpmac_hw_init(struct net_device *dev) -{ - int i; - struct cpmac_priv *priv = netdev_priv(dev); - - for (i = 0; i < 8; i++) - priv->regs->tx_ptr[i] = 0; - priv->regs->rx_ptr[0] = virt_to_phys(priv->rx_head); - - priv->regs->mbp = MBP_RXSHORT | MBP_RXBCAST | MBP_RXMCAST; - priv->regs->unicast_enable = 0x1; - priv->regs->unicast_clear = 0xfe; - priv->regs->buffer_offset = 0; - for (i = 0; i < 8; i++) - priv->regs->mac_addr_low[i] = dev->dev_addr[5]; - priv->regs->mac_addr_mid = dev->dev_addr[4]; - priv->regs->mac_addr_high = dev->dev_addr[0] | (dev->dev_addr[1] << 8) - | (dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24); - priv->regs->max_len = CPMAC_SKB_SIZE; - priv->regs->rx_int.enable = 0x1; - priv->regs->rx_int.clear = 0xfe; - priv->regs->tx_int.enable = 0xff; - priv->regs->tx_int.clear = 0; - priv->regs->mac_int_enable = 3; - priv->regs->mac_int_clear = 0xfc; - - priv->regs->rx_ctrl.control |= 1; - priv->regs->tx_ctrl.control |= 1; - priv->regs->mac_control |= MAC_MII | MAC_FDX; - - priv->phy->state = PHY_CHANGELINK; - phy_start(priv->phy); -} - -static int cpmac_open(struct net_device *dev) -{ - int i, size, res; - struct cpmac_priv *priv = netdev_priv(dev); - struct cpmac_desc *desc; - struct sk_buff *skb; - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) - priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, - 0, PHY_INTERFACE_MODE_MII); -#else - priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0); -#endif - if (IS_ERR(priv->phy)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(priv->phy); - } - - if (!request_mem_region(dev->mem_start, dev->mem_end - - dev->mem_start, dev->name)) { - printk("%s: failed to request registers\n", - dev->name); - res = -ENXIO; - goto fail_reserve; - } - - priv->regs = ioremap_nocache(dev->mem_start, dev->mem_end - - dev->mem_start); - if (!priv->regs) { - printk("%s: failed to remap registers\n", dev->name); - res = -ENXIO; - goto fail_remap; - } - - priv->rx_head = NULL; - size = sizeof(struct cpmac_desc) * (rx_ring_size + - CPMAC_TX_RING_SIZE); - priv->desc_ring = (struct cpmac_desc *)kmalloc(size, GFP_KERNEL); - if (!priv->desc_ring) { - res = -ENOMEM; - goto fail_alloc; - } - - memset((char *)priv->desc_ring, 0, size); - - priv->skb_pool = NULL; - priv->free_skbs = 0; - priv->rx_head = &priv->desc_ring[CPMAC_TX_RING_SIZE]; - -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) - INIT_WORK(&priv->alloc_work, cpmac_alloc_skbs); -#else - INIT_WORK(&priv->alloc_work, cpmac_alloc_skbs, dev); -#endif - schedule_work(&priv->alloc_work); - flush_scheduled_work(); - - for (i = 0; i < rx_ring_size; i++) { - desc = &priv->rx_head[i]; - skb = cpmac_get_skb(dev); - if (!skb) { - res = -ENOMEM; - goto fail_desc; - } - desc->skb = skb; - desc->hw_data = virt_to_phys(skb->data); - desc->buflen = CPMAC_SKB_SIZE; - desc->dataflags = CPMAC_OWN; - desc->next = &priv->rx_head[(i + 1) % rx_ring_size]; - desc->hw_next = virt_to_phys(desc->next); - dma_cache_wback((u32)desc, 16); - } - - if((res = request_irq(dev->irq, cpmac_irq, SA_INTERRUPT, - dev->name, dev))) { - printk("%s: failed to obtain irq\n", dev->name); - goto fail_irq; - } - - cpmac_reset(dev); - cpmac_hw_init(dev); - - netif_start_queue(dev); - return 0; - -fail_irq: -fail_desc: - for (i = 0; i < rx_ring_size; i++) - if (priv->rx_head[i].skb) - kfree_skb(priv->rx_head[i].skb); -fail_alloc: - kfree(priv->desc_ring); - - for (skb = priv->skb_pool; skb; skb = priv->skb_pool) { - priv->skb_pool = skb->next; - kfree_skb(skb); - } - - iounmap(priv->regs); - -fail_remap: - release_mem_region(dev->mem_start, dev->mem_end - - dev->mem_start); - -fail_reserve: - phy_disconnect(priv->phy); - - return res; -} - -static int cpmac_stop(struct net_device *dev) -{ - int i; - struct sk_buff *skb; - struct cpmac_priv *priv = netdev_priv(dev); - - netif_stop_queue(dev); - - phy_stop(priv->phy); - phy_disconnect(priv->phy); - priv->phy = NULL; - - cpmac_reset(dev); - - for (i = 0; i < 8; i++) { - priv->regs->rx_ptr[i] = 0; - priv->regs->tx_ptr[i] = 0; - priv->regs->mbp = 0; - } - - free_irq(dev->irq, dev); - release_mem_region(dev->mem_start, dev->mem_end - - dev->mem_start); - - cancel_delayed_work(&priv->alloc_work); - flush_scheduled_work(); - - priv->rx_head = &priv->desc_ring[CPMAC_TX_RING_SIZE]; - for (i = 0; i < rx_ring_size; i++) - if (priv->rx_head[i].skb) - kfree_skb(priv->rx_head[i].skb); - - kfree(priv->desc_ring); - - for (skb = priv->skb_pool; skb; skb = priv->skb_pool) { - priv->skb_pool = skb->next; - kfree_skb(skb); - } - - return 0; -} - -static int external_switch = 0; - -static int __devinit cpmac_probe(struct platform_device *pdev) -{ - int i, rc, phy_id; - struct resource *res; - struct cpmac_priv *priv; - struct net_device *dev; - struct plat_cpmac_data *pdata; - - if (strcmp(pdev->name, "cpmac") != 0) - return -ENODEV; - - pdata = pdev->dev.platform_data; - - for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { - if (!(pdata->phy_mask & (1 << phy_id))) - continue; - if (!cpmac_mii.phy_map[phy_id]) - continue; - break; - } - - if (phy_id == PHY_MAX_ADDR) { - if (external_switch) { - phy_id = 0; - } else { - printk("cpmac: no PHY present\n"); - return -ENODEV; - } - } - - dev = alloc_etherdev(sizeof(struct cpmac_priv)); - - if (!dev) { - printk(KERN_ERR "cpmac: Unable to allocate net_device structure!\n"); - return -ENOMEM; - } - - SET_MODULE_OWNER(dev); - platform_set_drvdata(pdev, dev); - priv = netdev_priv(dev); - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); - if (!res) { - rc = -ENODEV; - goto fail; - } - - dev->mem_start = res->start; - dev->mem_end = res->end; - dev->irq = platform_get_irq_byname(pdev, "irq"); - - dev->mtu = 1500; - dev->open = cpmac_open; - dev->stop = cpmac_stop; - dev->set_config = cpmac_config; - dev->hard_start_xmit = cpmac_start_xmit; - dev->do_ioctl = cpmac_ioctl; - dev->get_stats = cpmac_stats; - dev->change_mtu = cpmac_change_mtu; - dev->set_mac_address = cpmac_set_mac_address; - dev->set_multicast_list = cpmac_set_multicast_list; - dev->tx_timeout = cpmac_tx_timeout; - dev->ethtool_ops = &cpmac_ethtool_ops; - if (!disable_napi) { - dev->poll = cpmac_poll; - dev->weight = min(rx_ring_size, 64); - } - - memset(priv, 0, sizeof(struct cpmac_priv)); - spin_lock_init(&priv->lock); - priv->msg_enable = netif_msg_init(NETIF_MSG_WOL, 0x3fff); - priv->config = pdata; - priv->dev = dev; - memcpy(dev->dev_addr, priv->config->dev_addr, sizeof(dev->dev_addr)); - if (phy_id == 31) { - snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, - cpmac_mii.id, phy_id); - } else { - snprintf(priv->phy_name, BUS_ID_SIZE, "fixed@%d:%d", 100, 1); - } - - if ((rc = register_netdev(dev))) { - printk("cpmac: error %i registering device %s\n", - rc, dev->name); - goto fail; - } - - printk("cpmac: device %s (regs: %p, irq: %d, phy: %s, mac: ", - dev->name, (u32 *)dev->mem_start, dev->irq, - priv->phy_name); - for (i = 0; i < 6; i++) { - printk("%02x", dev->dev_addr[i]); - if (i < 5) printk(":"); - else printk(")\n"); - } - - return 0; - -fail: - free_netdev(dev); - return rc; -} - -static int __devexit cpmac_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - unregister_netdev(dev); - free_netdev(dev); - return 0; -} - -static struct platform_driver cpmac_driver = { - .driver.name = "cpmac", - .probe = cpmac_probe, - .remove = cpmac_remove, -}; - -int __devinit cpmac_init(void) -{ - volatile u32 mask; - int i, res; - cpmac_mii.priv = (struct cpmac_mdio_regs *) - ioremap_nocache(AR7_REGS_MDIO, sizeof(struct cpmac_mdio_regs)); - - if (!cpmac_mii.priv) { - printk("Can't ioremap mdio registers\n"); - return -ENXIO; - } - -#warning FIXME: unhardcode gpio&reset bits - ar7_gpio_disable(26); - ar7_gpio_disable(27); - ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); - ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); - ar7_device_reset(AR7_RESET_BIT_EPHY); - - cpmac_mii.reset(&cpmac_mii); - - for (i = 0; i < 300000; i++) { - mask = ((struct cpmac_mdio_regs *)cpmac_mii.priv)->alive; - if (mask) - break; - } - - mask &= 0x7fffffff; - if (mask & (mask - 1)) { - external_switch = 1; - mask = 0; - } - - cpmac_mii.phy_mask = ~(mask | 0x80000000); - - res = mdiobus_register(&cpmac_mii); - if (res) - goto fail_mii; - - res = platform_driver_register(&cpmac_driver); - if (res) - goto fail_cpmac; - - return 0; - -fail_cpmac: - mdiobus_unregister(&cpmac_mii); - -fail_mii: - iounmap(cpmac_mii.priv); - - return res; -} - -void __devexit cpmac_exit(void) -{ - platform_driver_unregister(&cpmac_driver); - mdiobus_unregister(&cpmac_mii); -} - -module_init(cpmac_init); -module_exit(cpmac_exit); diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h deleted file mode 100644 index ae1d4192bf..0000000000 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/ar7.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef __AR7_H__ -#define __AR7_H__ - -#include -#include -#include - -#define AR7_REGS_BASE 0x08610000 - -#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) -#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) -#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) // 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) -#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) -#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) -#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) -#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1A00) -#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1C00) -#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1E00) -#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) -#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) - -#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) -#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) -#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) - -#define AR7_RESET_PEREPHERIAL 0x0 -#define AR7_RESET_SOFTWARE 0x4 -#define AR7_RESET_STATUS 0x8 - -#define AR7_RESET_BIT_CPMAC_LO 17 -#define AR7_RESET_BIT_CPMAC_HI 21 -#define AR7_RESET_BIT_MDIO 22 -#define AR7_RESET_BIT_EPHY 26 - -/* GPIO control registers */ -#define AR7_GPIO_INPUT 0x0 -#define AR7_GPIO_OUTPUT 0x4 -#define AR7_GPIO_DIR 0x8 -#define AR7_GPIO_ENABLE 0xC - -#define AR7_CHIP_7100 0x18 -#define AR7_CHIP_7200 0x2b -#define AR7_CHIP_7300 0x05 - -/* Interrupts */ -#define AR7_IRQ_UART0 15 -#define AR7_IRQ_UART1 16 - -/* Clocks */ -#define AR7_AFE_CLOCK 35328000 -#define AR7_REF_CLOCK 25000000 -#define AR7_XTAL_CLOCK 24000000 - -struct plat_cpmac_data { - int reset_bit; - int power_bit; - u32 phy_mask; - char dev_addr[6]; -}; - -struct plat_dsl_data { - int reset_bit_dsl; - int reset_bit_sar; -}; - -extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; - -static inline u16 ar7_chip_id(void) -{ - return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; -} - -static inline u8 ar7_chip_rev(void) -{ - return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; -} - -static inline int ar7_cpu_freq(void) -{ - return ar7_cpu_clock; -} - -static inline int ar7_bus_freq(void) -{ - return ar7_bus_clock; -} - -static inline int ar7_vbus_freq(void) -{ - return ar7_bus_clock / 2; -} -#define ar7_cpmac_freq ar7_vbus_freq - -static inline int ar7_dsp_freq(void) -{ - return ar7_dsp_clock; -} - -static inline int ar7_has_high_cpmac(void) -{ - u16 chip_id = ar7_chip_id(); - switch (chip_id) { - case AR7_CHIP_7100: - case AR7_CHIP_7200: - return 0; - default: - return 1; - } -} -#define ar7_has_high_vlynq ar7_has_high_cpmac -#define ar7_has_second_uart ar7_has_high_cpmac - -static inline void ar7_device_enable(u32 bit) -{ - void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); - writel(readl(reset_reg) | (1 << bit), reset_reg); - mdelay(20); -} - -static inline void ar7_device_disable(u32 bit) -{ - void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); - writel(readl(reset_reg) & ~(1 << bit), reset_reg); - mdelay(20); -} - -static inline void ar7_device_reset(u32 bit) -{ - ar7_device_disable(bit); - ar7_device_enable(bit); -} - -static inline void ar7_device_on(u32 bit) -{ - void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); - writel(readl(power_reg) | (1 << bit), power_reg); - mdelay(20); -} - -static inline void ar7_device_off(u32 bit) -{ - void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); - writel(readl(power_reg) & ~(1 << bit), power_reg); - mdelay(20); -} - -#endif /* __AR7_H__ */ diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/gpio.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/gpio.h deleted file mode 100644 index 1cb11a377b..0000000000 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/gpio.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * $Id: gpio.h 6693 2007-03-25 05:42:16Z ejka $ - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef __AR7_GPIO_H__ -#define __AR7_GPIO_H__ -#include - -#define AR7_GPIO_MAX 32 - -extern int gpio_request(unsigned gpio, char *label); -extern void gpio_free(unsigned gpio); - -/* Common GPIO layer */ -static inline int gpio_direction_input(unsigned gpio) -{ - void __iomem *gpio_dir = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); - - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - writel(readl(gpio_dir) | (1 << gpio), gpio_dir); - - return 0; -} - -static inline int gpio_direction_output(unsigned gpio) -{ - void __iomem *gpio_dir = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); - - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); - - return 0; -} - -static inline int gpio_get_value(unsigned gpio) -{ - void __iomem *gpio_in = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); - - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - return ((readl(gpio_in) & (1 << gpio)) != 0); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - void __iomem *gpio_out = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); - volatile unsigned tmp; - - if (gpio >= AR7_GPIO_MAX) - return; - - tmp = readl(gpio_out) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; - writel(tmp, gpio_out); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -/* Board specific GPIO functions */ -static inline int ar7_gpio_enable(unsigned gpio) -{ - void __iomem *gpio_en = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); - - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - writel(readl(gpio_en) | (1 << gpio), gpio_en); - - return 0; -} - -static inline int ar7_gpio_disable(unsigned gpio) -{ - void __iomem *gpio_en = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); - - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - writel(readl(gpio_en) & ~(1 << gpio), gpio_en); - - return 0; -} - -#include - -#endif diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/mmzone.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/mmzone.h deleted file mode 100644 index 885fdb0cb0..0000000000 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/mmzone.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef _ASM_MACH_MMZONE_H -#define _ASM_MACH_MMZONE_H - -extern pg_data_t __node_data[]; -#define NODE_DATA(nid) (&__node_data[nid]) -#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) -#define pa_to_nid(addr) (((addr) >= ARCH_PFN_OFFSET << PAGE_SHIFT) ? 0 : -1) - -#endif /* _ASM_MACH_MMZONE_H */ diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h deleted file mode 100644 index 138941737b..0000000000 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/prom.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#ifndef __PROM_H__ -#define __PROM_H__ - -extern char *prom_getenv(char *name); -extern void prom_printf(char *fmt, ...); - -#endif /* __PROM_H__ */ diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/spaces.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/spaces.h deleted file mode 100644 index f4d1237925..0000000000 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/spaces.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle - * Copyright (C) 2000, 2002 Maciej W. Rozycki - * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_AR7_SPACES_H -#define _ASM_AR7_SPACES_H - -#define CAC_BASE 0x80000000 -#define IO_BASE 0xa0000000 -#define UNCAC_BASE 0xa0000000 -#define MAP_BASE 0xc0000000 - -/* - * This handles the memory map. - * We handle pages at KSEG0 for kernels with 32 bit address space. - */ -#define PAGE_OFFSET 0x94000000UL -#define PHYS_OFFSET 0x14000000UL - -/* - * Memory above this physical address will be considered highmem. - */ -#ifndef HIGHMEM_START -#define HIGHMEM_START 0x40000000UL -#endif - -#endif /* __ASM_AR7_SPACES_H */ diff --git a/target/linux/ar7-2.6/files/include/asm-mips/ar7/vlynq.h b/target/linux/ar7-2.6/files/include/asm-mips/ar7/vlynq.h deleted file mode 100644 index 9e35471a38..0000000000 --- a/target/linux/ar7-2.6/files/include/asm-mips/ar7/vlynq.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * $Id$ - * - * Copyright (C) 2006, 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - - -#ifndef __VLYNQ_H__ -#define __VLYNQ_H__ - -struct vlynq_mapping { - u32 size; - u32 offset; -} __attribute__ ((packed)); - -struct vlynq_device_id { - u32 id; -}; - -struct vlynq_regs; -struct vlynq_device { - u32 id; - int irq; - int local_irq; - int remote_irq; - int clock_div; - u32 regs_start, regs_end; - u32 mem_start, mem_end; - u32 irq_start, irq_end; - void *priv; - struct vlynq_regs *local; - struct vlynq_regs *remote; - struct device dev; -}; - -struct vlynq_driver { - char *name; - int (*probe)(struct vlynq_device *dev); - int (*remove)(struct vlynq_device *dev); - struct device_driver driver; -}; - -#define to_vlynq_driver(drv) container_of(drv, struct vlynq_driver, driver) - -struct plat_vlynq_ops { - int (*on)(struct vlynq_device *dev); - void (*off)(struct vlynq_device *dev); -}; - -#define to_vlynq_device(device) container_of(device, struct vlynq_device, dev) - -extern struct bus_type vlynq_bus_type; - -extern int __vlynq_register_driver(struct vlynq_driver *driver, - struct module *owner); - -static inline int vlynq_register_driver(struct vlynq_driver *driver) -{ - return __vlynq_register_driver(driver, THIS_MODULE); -} - -extern void vlynq_unregister_driver(struct vlynq_driver *driver); -extern int vlynq_device_enable(struct vlynq_device *dev); -extern void vlynq_device_disable(struct vlynq_device *dev); -extern u32 vlynq_local_id(struct vlynq_device *dev); -extern u32 vlynq_remote_id(struct vlynq_device *dev); -extern void vlynq_set_local_mapping(struct vlynq_device *dev, - u32 tx_offset, - struct vlynq_mapping *mapping); -extern void vlynq_set_remote_mapping(struct vlynq_device *dev, - u32 tx_offset, - struct vlynq_mapping *mapping); -extern int vlynq_virq_to_irq(struct vlynq_device *dev, int virq); -extern int vlynq_irq_to_virq(struct vlynq_device *dev, int irq); -extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq); -extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq); - -#endif /* __VLYNQ_H__ */ diff --git a/target/linux/ar7-2.6/files/include/asm-mips/gpio.h b/target/linux/ar7-2.6/files/include/asm-mips/gpio.h deleted file mode 100644 index e69de29bb2..0000000000 diff --git a/target/linux/ar7-2.6/image/Makefile b/target/linux/ar7-2.6/image/Makefile deleted file mode 100644 index 27af165533..0000000000 --- a/target/linux/ar7-2.6/image/Makefile +++ /dev/null @@ -1,81 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -DROP_SECTIONS := .reginfo .mdebug .comment .note .pdr .options .MIPS.options -OBJCOPY_SREC := $(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS)) - -LOADADDR := 0x94600000 -KERNEL_ENTRY := 0x94100000 -RAMSTART := 0x94000000 -RAMSIZE := 0x00100000 - -LOADER_MAKEOPTS= \ - KDIR=$(KDIR) \ - LOADADDR=$(LOADADDR) \ - KERNEL_ENTRY=$(KERNEL_ENTRY) \ - RAMSTART=$(RAMSTART) \ - RAMSIZE=$(RAMSIZE) - -CFLAGS := -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ - -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ - -pipe -mlong-calls -fno-common \ - -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap \ - -DLOADADDR=$(LOADADDR) - -define Build/Clean - $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean -endef - -define Image/Prepare - cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma - - $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader \ - $(LOADER_MAKEOPTS) \ - clean compile - $(OBJCOPY_SREC) $(KDIR)/loader.elf $(KDIR)/loader.srec - srec2bin $(KDIR)/loader.srec $(KDIR)/loader.bin -endef - -define align/jffs2-64k -bs=65536 conv=sync -endef - -define align/jffs2-128k -bs=131072 conv=sync -endef - -define Image/Build/CyberTAN - (dd if=/dev/zero bs=16 count=1; cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin) | \ - $(STAGING_DIR_HOST)/bin/addpattern -p $(3) -o $(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(4).bin -endef - -#define Image/Build/sErCoMm -# cat sercomm/adam2.bin "$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin" > "$(KDIR)/dgfw.tmp" -# dd if=sercomm/$(2) of="$(KDIR)/dgfw.tmp" bs=$$$$((0x3e0000 - 80)) seek=1 conv=notrunc -# $(STAGING_DIR_HOST)/bin/dgfirmware -f -w "$(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(3).img" "$(KDIR)/dgfw.tmp" -# rm -f "$(KDIR)/dgfw.tmp" -#endef - -define Image/Build - dd if=$(KDIR)/loader.bin $(call align/$(1)) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin - cat $(KDIR)/root.$(1) >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin - $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin) - $(call Image/Build/CyberTAN,$(1),AG1B,AG1B,$(1)) - $(call Image/Build/CyberTAN,$(1),WA21,WA21,$(1)) - $(call Image/Build/CyberTAN,$(1),WA22,WA22,$(1)) - $(call Image/Build/CyberTAN,$(1),WAG2,WAG2,$(1)) - $(call Image/Build/CyberTAN,$(1),WA31,WA31 -b,$(1)) - $(call Image/Build/CyberTAN,$(1),WA32,WA32 -b,$(1)) - $(call Image/Build/CyberTAN,$(1),WA7A,WA7A -b,$(1)) - $(call Image/Build/CyberTAN,$(1),WA7B,WA7B -b,$(1)) -# $(call Image/Build/sErCoMm,$(1),dg834,$(1)) -# $(call Image/Build/sErCoMm,$(1),jdr454wb,$(1)) -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch b/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch deleted file mode 100644 index 5989580ee8..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/100-board_support.patch +++ /dev/null @@ -1,75 +0,0 @@ -diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig ---- linux-2.6.22/arch/mips/Kconfig 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200 -@@ -15,6 +15,20 @@ - prompt "System type" - default SGI_IP22 - -+config AR7 -+ bool "Texas Instruments AR7" -+ select BOOT_ELF32 -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SWAP_IO_SPACE -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_HAS_EARLY_PRINTK -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_KGDB -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select GENERIC_GPIO -+ - config MACH_ALCHEMY - bool "Alchemy processor based machines" - -diff -urN linux-2.6.22/arch/mips/kernel/traps.c linux-2.6.22.new/arch/mips/kernel/traps.c ---- linux-2.6.22/arch/mips/kernel/traps.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/kernel/traps.c 2007-07-11 02:32:39.000000000 +0200 -@@ -1051,11 +1051,6 @@ - unsigned long exception_handlers[32]; - unsigned long vi_handlers[64]; - --/* -- * As a side effect of the way this is implemented we're limited -- * to interrupt handlers in the address range from -- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ... -- */ - void *set_except_vector(int n, void *addr) - { - unsigned long handler = (unsigned long) addr; -@@ -1063,9 +1058,15 @@ - - exception_handlers[n] = handler; - if (n == 0 && cpu_has_divec) { -- *(volatile u32 *)(ebase + 0x200) = 0x08000000 | -- (0x03ffffff & (handler >> 2)); -- flush_icache_range(ebase + 0x200, ebase + 0x204); -+ /* lui k0, 0x0000 */ -+ *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16); -+ /* ori k0, 0x0000 */ -+ *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff); -+ /* jr k0 */ -+ *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008; -+ /* nop */ -+ *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000; -+ flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210); - } - return (void *)old_handler; - } -diff -urN linux-2.6.22/arch/mips/Makefile linux-2.6.22.new/arch/mips/Makefile ---- linux-2.6.22/arch/mips/Makefile 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22.new/arch/mips/Makefile 2007-07-11 02:32:39.000000000 +0200 -@@ -158,6 +158,13 @@ - # - - # -+# Texas Instruments AR7 -+# -+core-$(CONFIG_AR7) += arch/mips/ar7/ -+cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 -+load-$(CONFIG_AR7) += 0xffffffff94100000 -+ -+# - # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. - # - core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ diff --git a/target/linux/ar7-2.6/patches-2.6.22/110-flash.patch b/target/linux/ar7-2.6/patches-2.6.22/110-flash.patch deleted file mode 100644 index b104067540..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/110-flash.patch +++ /dev/null @@ -1,39 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig ---- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700 -@@ -152,6 +152,12 @@ - for your particular device. It won't happen automatically. The - 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. - -+config MTD_AR7_PARTS -+ tristate "TI AR7 partitioning support" -+ depends on MTD_PARTITIONS -+ ---help--- -+ TI AR7 partitioning support -+ - comment "User Modules And Translation Layers" - depends on MTD - -diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile ---- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700 -@@ -12,6 +12,7 @@ - obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o - obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o - obj-$(CONFIG_MTD_AFS_PARTS) += afs.o -+obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o - - # 'Users' - code which presents functionality to userspace. - obj-$(CONFIG_MTD_CHAR) += mtdchar.o -diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c ---- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700 -@@ -74,7 +74,7 @@ - - static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; - #ifdef CONFIG_MTD_PARTITIONS --static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; -+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL }; - #endif - - static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch b/target/linux/ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch deleted file mode 100644 index 41a8b8e02f..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/120-gpio_chrdev.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig ---- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100 -@@ -920,6 +920,15 @@ - To compile this driver as a module, choose M here: the - module will be called mwave. - -+config AR7_GPIO -+ tristate "TI AR7 GPIO Support" -+ depends on AR7 -+ help -+ Give userspace access to the GPIO pins on the Texas Instruments AR7 -+ processors. -+ -+ If compiled as a module, it will be called ar7_gpio. -+ - config SCx200_GPIO - tristate "NatSemi SCx200 GPIO Support" - depends on SCx200 -diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile ---- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100 -@@ -83,6 +83,7 @@ - obj-$(CONFIG_PPDEV) += ppdev.o - obj-$(CONFIG_NWBUTTON) += nwbutton.o - obj-$(CONFIG_NWFLASH) += nwflash.o -+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o - obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o - obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o - obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7-2.6/patches-2.6.22/130-leds.patch b/target/linux/ar7-2.6/patches-2.6.22/130-leds.patch deleted file mode 100644 index 261b712196..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/130-leds.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig ---- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100 -@@ -19,6 +19,12 @@ - - comment "LED drivers" - -+config LEDS_AR7 -+ tristate "LED Support for the TI AR7" -+ depends LEDS_CLASS && AR7 -+ help -+ This option enables support for the LEDs on TI AR7. -+ - config LEDS_CORGI - tristate "LED Support for the Sharp SL-C7x0 series" - depends LEDS_CLASS && PXA_SHARP_C7xx -diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile ---- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100 -@@ -5,6 +5,7 @@ - obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o - - # LED Platform Drivers -+obj-$(CONFIG_LEDS_AR7) += leds-ar7.o - obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o - obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o - obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/ar7-2.6/patches-2.6.22/140-watchdog.patch b/target/linux/ar7-2.6/patches-2.6.22/140-watchdog.patch deleted file mode 100644 index 163df40ba6..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/140-watchdog.patch +++ /dev/null @@ -1,27 +0,0 @@ -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig ---- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100 -@@ -544,6 +544,12 @@ - - # MIPS Architecture - -+config AR7_WDT -+ tristate "TI AR7 Watchdog Timer" -+ depends on WATCHDOG && AR7 -+ help -+ Hardware driver for the TI AR7 Watchdog Timer. -+ - config INDYDOG - tristate "Indy/I2 Hardware Watchdog" - depends on WATCHDOG && SGI_IP22 -diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile ---- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100 -+++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100 -@@ -71,6 +71,7 @@ - obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o - - # MIPS Architecture -+obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_INDYDOG) += indydog.o - - # S390 Architecture diff --git a/target/linux/ar7-2.6/patches-2.6.22/200-ethernet_driver.patch b/target/linux/ar7-2.6/patches-2.6.22/200-ethernet_driver.patch deleted file mode 100644 index ca603ad610..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/200-ethernet_driver.patch +++ /dev/null @@ -1,30 +0,0 @@ -diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig ---- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700 -@@ -1777,6 +1777,15 @@ - workstations. - See . - -+config CPMAC -+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" -+ depends on NET_ETHERNET && EXPERIMENTAL && AR7 -+ select PHYLIB -+ select FIXED_PHY -+ select FIXED_MII_100_FDX -+ help -+ TI AR7 CPMAC Ethernet support -+ - config NET_POCKET - bool "Pocket and portable adapters" - depends on NET_ETHERNET && PARPORT -diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile ---- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700 -+++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700 -@@ -148,6 +148,7 @@ - obj-$(CONFIG_8139TOO) += 8139too.o - obj-$(CONFIG_ZNET) += znet.o - obj-$(CONFIG_LAN_SAA9730) += saa9730.o -+obj-$(CONFIG_CPMAC) += cpmac.o - obj-$(CONFIG_DEPCA) += depca.o - obj-$(CONFIG_EWRK3) += ewrk3.o - obj-$(CONFIG_ATP) += atp.o diff --git a/target/linux/ar7-2.6/patches-2.6.22/210-phy_fixed.patch b/target/linux/ar7-2.6/patches-2.6.22/210-phy_fixed.patch deleted file mode 100644 index c8eceebb50..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/210-phy_fixed.patch +++ /dev/null @@ -1,93 +0,0 @@ -Index: linux-2.6.21.4/drivers/net/phy/fixed.c -=================================================================== ---- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200 -+++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200 -@@ -187,6 +187,19 @@ - .driver = { .owner = THIS_MODULE,}, - }; - -+static void fixed_mdio_release (struct device * dev) -+{ -+ struct phy_device *phydev = container_of(dev, struct phy_device, dev); -+ struct mii_bus *bus = phydev->bus; -+ struct fixed_info *fixed = bus->priv; -+ -+ kfree(phydev); -+ kfree(bus->dev); -+ kfree(bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+} -+ - /*----------------------------------------------------------------------------- - * This func is used to create all the necessary stuff, bind - * the fixed phy driver and register all it on the mdio_bus_type. -@@ -221,6 +234,12 @@ - } - - fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); -+ if (NULL == fixed->regs) { -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed); -+ return -ENOMEM; -+ } - fixed->regs_num = MII_REGS_NUM; - fixed->phy_status.speed = speed; - fixed->phy_status.duplex = duplex; -@@ -249,8 +268,11 @@ - fixed->phydev = phydev; - - if(NULL == phydev) { -- err = -ENOMEM; -- goto device_create_fail; -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return -ENOMEM; - } - - phydev->irq = PHY_IGNORE_INTERRUPT; -@@ -262,8 +283,33 @@ - else - snprintf(phydev->dev.bus_id, BUS_ID_SIZE, - "fixed@%d:%d", speed, duplex); -+ - phydev->bus = new_bus; - -+#if 1 -+ phydev->dev.driver = &fixed_mdio_driver.driver; -+ phydev->dev.release = fixed_mdio_release; -+ -+ err = phydev->dev.driver->probe(&phydev->dev); -+ if(err < 0) { -+ printk(KERN_ERR "Phy %s: problems with fixed driver\n", -+ phydev->dev.bus_id); -+ kfree(phydev); -+ kfree(dev); -+ kfree(new_bus); -+ kfree(fixed->regs); -+ kfree(fixed); -+ return err; -+ } -+ -+ err = device_register(&phydev->dev); -+ if(err) { -+ printk(KERN_ERR "Phy %s failed to register\n", -+ phydev->dev.bus_id); -+ } -+ -+ return 0; -+#else - err = device_register(&phydev->dev); - if(err) { - printk(KERN_ERR "Phy %s failed to register\n", -@@ -306,6 +354,7 @@ - kfree(fixed); - - return err; -+#endif - } - - diff --git a/target/linux/ar7-2.6/patches-2.6.22/500-serial_kludge.patch b/target/linux/ar7-2.6/patches-2.6.22/500-serial_kludge.patch deleted file mode 100644 index da38903a32..0000000000 --- a/target/linux/ar7-2.6/patches-2.6.22/500-serial_kludge.patch +++ /dev/null @@ -1,62 +0,0 @@ -diff -urN linux-2.6.22.orig/drivers/serial/8250.c linux-2.6.22/drivers/serial/8250.c ---- linux-2.6.22.orig/drivers/serial/8250.c 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/drivers/serial/8250.c 2007-07-11 03:08:57.000000000 +0200 -@@ -258,6 +258,13 @@ - .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, - .flags = UART_CAP_FIFO, - }, -+ [PORT_AR7] = { -+ .name = "TI-AR7", -+ .fifo_size = 16, -+ .tx_loadsz = 16, -+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, -+ .flags = UART_CAP_FIFO | UART_CAP_AFE, -+ }, - }; - - #if defined (CONFIG_SERIAL_8250_AU1X00) -@@ -2436,7 +2443,7 @@ - { - struct uart_8250_port *up = (struct uart_8250_port *)port; - -- wait_for_xmitr(up, UART_LSR_THRE); -+ wait_for_xmitr(up, BOTH_EMPTY); - serial_out(up, UART_TX, ch); - } - -diff -urN linux-2.6.22.orig/include/linux/serial_core.h linux-2.6.22/include/linux/serial_core.h ---- linux-2.6.22.orig/include/linux/serial_core.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/linux/serial_core.h 2007-07-11 03:09:49.000000000 +0200 -@@ -40,6 +40,7 @@ - #define PORT_NS16550A 14 - #define PORT_XSCALE 15 - #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ -+#define PORT_AR7 16 - #define PORT_MAX_8250 16 /* max port ID */ - - /* -diff -urN linux-2.6.22.orig/include/linux/serialP.h linux-2.6.22/include/linux/serialP.h ---- linux-2.6.22.orig/include/linux/serialP.h 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/include/linux/serialP.h 2007-07-11 03:08:57.000000000 +0200 -@@ -135,6 +135,9 @@ - * the interrupt line _up_ instead of down, so if we register the IRQ - * while the UART is in that state, we die in an IRQ storm. */ - #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) -+#elif defined(CONFIG_AR7) -+/* This is how it is set up by bootloader... */ -+#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 | UART_MCR_RTS | UART_MCR_DTR) - #else - #define ALPHA_KLUDGE_MCR 0 - #endif -diff -urN linux-2.6.22.orig/scripts/setlocalversion linux-2.6.22/scripts/setlocalversion ---- linux-2.6.22.orig/scripts/setlocalversion 2007-07-09 01:32:17.000000000 +0200 -+++ linux-2.6.22/scripts/setlocalversion 2007-07-11 03:08:57.000000000 +0200 -@@ -1,6 +1,8 @@ - #!/bin/sh - # Print additional version information for non-release trees. - -+exit 0 -+ - usage() { - echo "Usage: $0 [srctree]" >&2 - exit 1 diff --git a/target/linux/ar7-2.6/profiles/100-Texas.mk b/target/linux/ar7-2.6/profiles/100-Texas.mk deleted file mode 100644 index a9306ca702..0000000000 --- a/target/linux/ar7-2.6/profiles/100-Texas.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/Texas - NAME:=Texas Instruments WiFi (default) - PACKAGES:=kmod-acx -endef - -define Profile/Texas/Description - Package set compatible with hardware using Texas Instruments WiFi cards -endef -$(eval $(call Profile,Texas)) - diff --git a/target/linux/ar7-2.6/profiles/110-None.mk b/target/linux/ar7-2.6/profiles/110-None.mk deleted file mode 100644 index 2fcfacde9f..0000000000 --- a/target/linux/ar7-2.6/profiles/110-None.mk +++ /dev/null @@ -1,17 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -define Profile/None - NAME:=No WiFi - PACKAGES:= -endef - -define Profile/None/Description - Package set without WiFi support -endef -$(eval $(call Profile,None)) - diff --git a/target/linux/ar7-2.6/src/adam2patcher.c b/target/linux/ar7-2.6/src/adam2patcher.c deleted file mode 100644 index 25a78074a6..0000000000 --- a/target/linux/ar7-2.6/src/adam2patcher.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * patcher.c - ADAM2 patcher for Netgear DG834 (and compatible) - * - * Copyright (C) 2006 Felix Fietkau - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -int main(int argc, char **argv) -{ - int fd; - char *ptr; - uint32_t *i; - - if (argc != 2) { - fprintf(stderr, "Usage: %s \n", argv[0]); - exit(1); - } - - if (((fd = open(argv[1], O_RDWR)) < 0) - || ((ptr = mmap(0, 128 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))) { - fprintf(stderr, "Can't open file\n"); - exit(1); - } - - i = (uint32_t *) &ptr[0x3944]; - if (*i == 0x0c000944) { - fprintf(stderr, "Unpatched ADAM2 detected. Patching... "); - *i = 0x00000000; - msync(i, sizeof(*i), MS_SYNC|MS_INVALIDATE); - fprintf(stderr, "done!\n"); - } else if (*i == 0x00000000) { - fprintf(stderr, "Patched ADAM2 detected.\n"); - } else { - fprintf(stderr, "Unknown ADAM2 detected. Can't patch!\n"); - } - - close(fd); -} diff --git a/target/linux/ar7/Makefile b/target/linux/ar7/Makefile new file mode 100644 index 0000000000..0beb8ae75d --- /dev/null +++ b/target/linux/ar7/Makefile @@ -0,0 +1,24 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=mipsel +BOARD:=ar7 +BOARDNAME:=TI AR7 +FEATURES:=squashfs jffs2 atm + +LINUX_VERSION:=2.6.22.4 + +define Target/Description + Build firmware images for TI AR7 based routers +endef + +include $(INCLUDE_DIR)/kernel-build.mk + +-include profiles/*.mk + +$(eval $(call BuildKernel)) diff --git a/target/linux/ar7/base-files.mk b/target/linux/ar7/base-files.mk new file mode 100644 index 0000000000..f21a604b83 --- /dev/null +++ b/target/linux/ar7/base-files.mk @@ -0,0 +1,11 @@ +define Build/Compile + $(call Build/Compile/Default) + $(TARGET_CC) -o $(PKG_BUILD_DIR)/adam2patcher $(PLATFORM_DIR)/src/adam2patcher.c +endef + +define Package/base-files/install-target + mkdir -p $(1)/sbin + $(CP) $(PKG_BUILD_DIR)/adam2patcher $(1)/sbin +endef + + diff --git a/target/linux/ar7/base-files/default/etc/config/network b/target/linux/ar7/base-files/default/etc/config/network new file mode 100644 index 0000000000..5fa112cc6e --- /dev/null +++ b/target/linux/ar7/base-files/default/etc/config/network @@ -0,0 +1,41 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0 + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + + + +## Example for ATM bridging. +## Useful for PPPoE or IP over ATM. Will create 'nas${unit}' +# +# config atm-bridge +# option unit 0 +# option encaps llc +# option vpi 8 +# option vci 35 + + +# config interface wan +## PPPoE: +# option ifname nas0 +# option proto pppoe + +## PPPoA: +# option ifname atm0 +# option proto pppoa +# option encaps llc +# option vpi 8 +# option vci 35 + +## Both: +# option username "my_username" +# option password "my_password" diff --git a/target/linux/ar7/base-files/default/etc/diag.sh b/target/linux/ar7/base-files/default/etc/diag.sh new file mode 100644 index 0000000000..22acc71abf --- /dev/null +++ b/target/linux/ar7/base-files/default/etc/diag.sh @@ -0,0 +1,19 @@ +#!/bin/sh +# Copyright (C) 2007 OpenWrt.org + +set_led() { + local led="$1" + local state="$2" + [ -d "/sys/class/leds/ar7:$led" ] && echo "$state" > "/sys/class/leds/ar7:$led/brightness" +} + +set_state() { + case "$1" in + preinit) + set_led status 1 + ;; + done) + set_led status 0 + ;; + esac +} diff --git a/target/linux/ar7/base-files/default/etc/init.d/adam2 b/target/linux/ar7/base-files/default/etc/init.d/adam2 new file mode 100755 index 0000000000..6b786270ea --- /dev/null +++ b/target/linux/ar7/base-files/default/etc/init.d/adam2 @@ -0,0 +1,13 @@ +#!/bin/sh /etc/rc.common +# ADAM2 patcher for Netgear DG834 and compatible +# Copyright (C) 2006 OpenWrt.org + +START=00 +start() { + MD5="$(md5sum /dev/mtdblock0 | awk '{print $1}')" + [ "$MD5" = "0530bfdf00ec155f4182afd70da028c1" ] && { + mtd unlock adam2 + /sbin/adam2patcher /dev/mtdblock0 + } + rm -f /etc/rc.d/S${START}adam2 /etc/init.d/adam2 /sbin/adam2patcher >&- 2>&- +} diff --git a/target/linux/ar7/config/default b/target/linux/ar7/config/default new file mode 100644 index 0000000000..605140a99a --- /dev/null +++ b/target/linux/ar7/config/default @@ -0,0 +1,199 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_64BIT_PHYS_ADDR is not set +CONFIG_AR7=y +CONFIG_AR7_GPIO=y +# CONFIG_AR7_WDT is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_ATMEL is not set +CONFIG_ATM_DRIVERS=y +CONFIG_BASE_SMALL=0 +# CONFIG_BCM43XX is not set +CONFIG_BITREVERSE=y +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BOOT_ELF32=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_BT is not set +CONFIG_CMDLINE="init=/etc/preinit rootfstype=squashfs,jffs2," +CONFIG_CPMAC=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_DDB5477 is not set +CONFIG_DEVPORT=y +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_FIXED_MII_100_FDX=y +# CONFIG_FIXED_MII_10_FDX is not set +CONFIG_FIXED_PHY=y +CONFIG_FS_POSIX_ACL=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +# CONFIG_GEN_RTC is not set +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HERMES is not set +# CONFIG_HOSTAP_PCI is not set +# CONFIG_HOSTAP_PLX is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +# CONFIG_I2C is not set +# CONFIG_IDE is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +CONFIG_IRQ_CPU=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_LEDS_AR7=y +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_VR41XX is not set +CONFIG_MIPS=y +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_EV64120 is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_AR7_PARTS=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +CONFIG_MTD_CFI=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PCI is not set +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_START=0x10000000 +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NET_PCI is not set +CONFIG_NET_SCH_FIFO=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PCIPCWATCHDOG is not set +CONFIG_PHYLIB=y +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNPACPI is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PRISM54 is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_RTC is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCSI_WAIT_SCAN=m +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_PCI=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SWAP_IO_SPACE=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_KGDB=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_TRAD_SIGNALS=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_USB is not set +# CONFIG_VGASTATE is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ar7/files/arch/mips/ar7/Makefile b/target/linux/ar7/files/arch/mips/ar7/Makefile new file mode 100644 index 0000000000..3ec49ee0d4 --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/Makefile @@ -0,0 +1,16 @@ + +obj-y := \ + prom.o \ + setup.o \ + memory.o \ + irq.o \ + time.o \ + platform.o \ + gpio.o \ + clock.o \ + vlynq.o + +obj-$(CONFIG_PCI) += \ + vlynq-pci.o + +EXTRA_AFLAGS := $(CFLAGS) diff --git a/target/linux/ar7/files/arch/mips/ar7/clock.c b/target/linux/ar7/files/arch/mips/ar7/clock.c new file mode 100644 index 0000000000..9bdc8f4076 --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/clock.c @@ -0,0 +1,470 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include + +#define BOOT_PLL_SOURCE_MASK 0x3 +#define CPU_PLL_SOURCE_SHIFT 16 +#define BUS_PLL_SOURCE_SHIFT 14 +#define USB_PLL_SOURCE_SHIFT 18 +#define DSP_PLL_SOURCE_SHIFT 22 +#define BOOT_PLL_SOURCE_AFE 0 +#define BOOT_PLL_SOURCE_BUS 0 +#define BOOT_PLL_SOURCE_REF 1 +#define BOOT_PLL_SOURCE_XTAL 2 +#define BOOT_PLL_SOURCE_CPU 3 +#define BOOT_PLL_BYPASS 0x00000020 +#define BOOT_PLL_ASYNC_MODE 0x02000000 +#define BOOT_PLL_2TO1_MODE 0x00008000 + +#define TNETD7200_CLOCK_ID_CPU 0 +#define TNETD7200_CLOCK_ID_DSP 1 +#define TNETD7200_CLOCK_ID_USB 2 + +#define TNETD7200_DEF_CPU_CLK 211000000 +#define TNETD7200_DEF_DSP_CLK 125000000 +#define TNETD7200_DEF_USB_CLK 48000000 + +struct tnetd7300_clock { + volatile u32 ctrl; +#define PREDIV_MASK 0x001f0000 +#define PREDIV_SHIFT 16 +#define POSTDIV_MASK 0x0000001f + u32 unused1[3]; + volatile u32 pll; +#define MUL_MASK 0x0000f000 +#define MUL_SHIFT 12 +#define PLL_MODE_MASK 0x00000001 +#define PLL_NDIV 0x00000800 +#define PLL_DIV 0x00000002 +#define PLL_STATUS 0x00000001 + u32 unused2[3]; +} __attribute__ ((packed)); + +struct tnetd7300_clocks { + struct tnetd7300_clock bus; + struct tnetd7300_clock cpu; + struct tnetd7300_clock usb; + struct tnetd7300_clock dsp; +} __attribute__ ((packed)); + +struct tnetd7200_clock { + volatile u32 ctrl; + u32 unused1[3]; +#define DIVISOR_ENABLE_MASK 0x00008000 + volatile u32 mul; + volatile u32 prediv; + volatile u32 postdiv; + volatile u32 postdiv2; + u32 unused2[6]; + volatile u32 cmd; + volatile u32 status; + volatile u32 cmden; + u32 padding[15]; +} __attribute__ ((packed)); + +struct tnetd7200_clocks { + struct tnetd7200_clock cpu; + struct tnetd7200_clock dsp; + struct tnetd7200_clock usb; +} __attribute__ ((packed)); + +int ar7_cpu_clock = 150000000; +EXPORT_SYMBOL(ar7_cpu_clock); +int ar7_bus_clock = 125000000; +EXPORT_SYMBOL(ar7_bus_clock); +int ar7_dsp_clock = 0; +EXPORT_SYMBOL(ar7_dsp_clock); + +static int gcd(int a, int b) +{ + int c; + + if (a < b) { + c = a; + a = b; + b = c; + } + while ((c = (a % b))) { + a = b; + b = c; + } + return b; +} + +static void approximate(int base, int target, int *prediv, + int *postdiv, int *mul) +{ + int i, j, k, freq, res = target; + for (i = 1; i <= 16; i++) { + for (j = 1; j <= 32; j++) { + for (k = 1; k <= 32; k++) { + freq = abs(base / j * i / k - target); + if (freq < res) { + res = freq; + *mul = i; + *prediv = j; + *postdiv = k; + } + } + } + } +} + +static void calculate(int base, int target, int *prediv, int *postdiv, + int *mul) +{ + int tmp_gcd, tmp_base, tmp_freq; + + for (*prediv = 1; *prediv <= 32; (*prediv)++) { + tmp_base = base / *prediv; + tmp_gcd = gcd(target, tmp_base); + *mul = target / tmp_gcd; + *postdiv = tmp_base / tmp_gcd; + if ((*mul < 1) || (*mul >= 16)) + continue; + if ((*postdiv > 0) & (*postdiv <= 32)) + break; + } + + if (base / (*prediv) * (*mul) / (*postdiv) != target) { + approximate(base, target, prediv, postdiv, mul); + tmp_freq = base / (*prediv) * (*mul) / (*postdiv); + printk(KERN_WARNING + "Adjusted requested frequency %d to %d\n", + target, tmp_freq); + } + + printk(KERN_DEBUG "Clocks: prediv: %d, postdiv: %d, mul: %d\n", + *prediv, *postdiv, *mul); +} + +static int tnetd7300_dsp_clock(void) +{ + u32 didr1, didr2; + u8 rev = ar7_chip_rev(); + didr1 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x18)); + didr2 = readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x1c)); + if (didr2 & (1 << 23)) + return 0; + if ((rev >= 0x23) && (rev != 0x57)) + return 250000000; + if ((((didr2 & 0x1fff) << 10) | ((didr1 & 0xffc00000) >> 22)) + > 4208000) + return 250000000; + return 0; +} + +static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int product; + int base_clock = AR7_REF_CLOCK; + u32 ctrl = clock->ctrl; + u32 pll = clock->pll; + int prediv = ((ctrl & PREDIV_MASK) >> PREDIV_SHIFT) + 1; + int postdiv = (ctrl & POSTDIV_MASK) + 1; + int divisor = prediv * postdiv; + int mul = ((pll & MUL_MASK) >> MUL_SHIFT) + 1; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + if (*bootcr & BOOT_PLL_BYPASS) + return base_clock / divisor; + + if ((pll & PLL_MODE_MASK) == 0) + return (base_clock >> (mul / 16 + 1)) / divisor; + + if ((pll & (PLL_NDIV | PLL_DIV)) == (PLL_NDIV | PLL_DIV)) { + product = (mul & 1) ? + (base_clock * mul) >> 1 : + (base_clock * (mul - 1)) >> 2; + return product / divisor; + } + + if (mul == 16) + return base_clock / divisor; + + return base_clock * mul / divisor; +} + +static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, + u32 *bootcr, u32 frequency) +{ + u32 status; + int prediv, postdiv, mul; + int base_clock = ar7_bus_clock; + + switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { + case BOOT_PLL_SOURCE_BUS: + base_clock = ar7_bus_clock; + break; + case BOOT_PLL_SOURCE_REF: + base_clock = AR7_REF_CLOCK; + break; + case BOOT_PLL_SOURCE_XTAL: + base_clock = AR7_XTAL_CLOCK; + break; + case BOOT_PLL_SOURCE_CPU: + base_clock = ar7_cpu_clock; + break; + } + + calculate(base_clock, frequency, &prediv, &postdiv, &mul); + + clock->ctrl = ((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1); + mdelay(1); + clock->pll = 4; + do { + status = clock->pll; + } while (status & PLL_STATUS); + clock->pll = ((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e; + mdelay(75); +} + +static void __init tnetd7300_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7300_clocks *clocks = (struct tnetd7300_clocks *)ioremap_nocache(AR7_REGS_POWER + 0x20, sizeof(struct tnetd7300_clocks)); + + ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, + &clocks->bus, bootcr, AR7_AFE_CLOCK); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) { + ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, + &clocks->cpu, bootcr, AR7_AFE_CLOCK); + } else { + ar7_cpu_clock = ar7_bus_clock; + } +#if 0 + tnetd7300_set_clock(USB_PLL_SOURCE_SHIFT, &clocks->usb, + bootcr, 48000000); +#endif + if (ar7_dsp_clock == 250000000) + tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, + bootcr, ar7_dsp_clock); + + iounmap(clocks); + iounmap(bootcr); +} + +static int tnetd7200_get_clock(int base, struct tnetd7200_clock *clock, + u32 *bootcr, u32 bus_clock) +{ + int divisor = ((clock->prediv & 0x1f) + 1) * + ((clock->postdiv & 0x1f) + 1); + + if (*bootcr & BOOT_PLL_BYPASS) + return base / divisor; + + return base * ((clock->mul & 0xf) + 1) / divisor; +} + + +static void tnetd7200_set_clock(int base, struct tnetd7200_clock *clock, + int prediv, int postdiv, int postdiv2, int mul, u32 frequency) +{ + printk("Clocks: base = %d, frequency = %u, prediv = %d, postdiv = %d, postdiv2 = %d, mul = %d\n", + base, frequency, prediv, postdiv, postdiv2, mul); + + clock->ctrl = 0; + clock->prediv = DIVISOR_ENABLE_MASK | ((prediv - 1) & 0x1F); + clock->mul = ((mul - 1) & 0xF); + + for(mul = 0; mul < 2000; mul++) /* nop */; + + while(clock->status & 0x1) /* nop */; + + clock->postdiv = DIVISOR_ENABLE_MASK | ((postdiv - 1) & 0x1F); + + clock->cmden |= 1; + clock->cmd |= 1; + + while(clock->status & 0x1) /* nop */; + + clock->postdiv2 = DIVISOR_ENABLE_MASK | ((postdiv2 - 1) & 0x1F); + + clock->cmden |= 1; + clock->cmd |= 1; + + while(clock->status & 0x1) /* nop */; + + clock->ctrl |= 1; +} + +static int tnetd7200_get_clock_base(int clock_id, u32 *bootcr) +{ + if (*bootcr & BOOT_PLL_ASYNC_MODE) { + // Async + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + } else { + // Sync + if (*bootcr & BOOT_PLL_2TO1_MODE) { + // 2:1 + switch (clock_id) { + case TNETD7200_CLOCK_ID_DSP: + return AR7_REF_CLOCK; + default: + return AR7_AFE_CLOCK; + } + } else { + // 1:1 + return AR7_REF_CLOCK; + } + } +} + + +static void __init tnetd7200_init_clocks(void) +{ + u32 *bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); + struct tnetd7200_clocks *clocks = (struct tnetd7200_clocks *)ioremap_nocache(AR7_REGS_POWER + 0x80, sizeof(struct tnetd7200_clocks)); + int cpu_base, cpu_mul, cpu_prediv, cpu_postdiv; + int dsp_base, dsp_mul, dsp_prediv, dsp_postdiv; + int usb_base, usb_mul, usb_prediv, usb_postdiv; + +/* + Log from Fritz!Box 7170 Annex B: + + CPU revision is: 00018448 + Clocks: Async mode + Clocks: Setting DSP clock + Clocks: prediv: 1, postdiv: 1, mul: 5 + Clocks: base = 25000000, frequency = 125000000, prediv = 1, postdiv = 2, postdiv2 = 1, mul = 10 + Clocks: Setting CPU clock + Adjusted requested frequency 211000000 to 211968000 + Clocks: prediv: 1, postdiv: 1, mul: 6 + Clocks: base = 35328000, frequency = 211968000, prediv = 1, postdiv = 1, postdiv2 = -1, mul = 6 + Clocks: Setting USB clock + Adjusted requested frequency 48000000 to 48076920 + Clocks: prediv: 13, postdiv: 1, mul: 5 + Clocks: base = 125000000, frequency = 48000000, prediv = 13, postdiv = 1, postdiv2 = -1, mul = 5 + + DSL didn't work if you didn't set the postdiv 2:1 postdiv2 combination, driver hung on startup. + Haven't tested this on a synchronous board, neither do i know what to do with ar7_dsp_clock +*/ + + cpu_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_CPU, bootcr); + dsp_base = tnetd7200_get_clock_base(TNETD7200_CLOCK_ID_DSP, bootcr); + + if (*bootcr & BOOT_PLL_ASYNC_MODE) { + printk("Clocks: Async mode\n"); + + printk("Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, + ar7_bus_clock); + + printk("Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + } else { + if (*bootcr & BOOT_PLL_2TO1_MODE) { + printk("Clocks: Sync 2:1 mode\n"); + + printk("Clocks: Setting CPU clock\n"); + calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, &cpu_postdiv, &cpu_mul); + ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; + tnetd7200_set_clock(cpu_base, &clocks->cpu, + cpu_prediv, cpu_postdiv, -1, cpu_mul, + ar7_cpu_clock); + + printk("Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ar7_cpu_clock / 2; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, + ar7_bus_clock); + } else { + printk("Clocks: Sync 1:1 mode\n"); + + printk("Clocks: Setting DSP clock\n"); + calculate(dsp_base, TNETD7200_DEF_CPU_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); + ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; + tnetd7200_set_clock(dsp_base, &clocks->dsp, + dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, + ar7_bus_clock); + + ar7_cpu_clock = ar7_bus_clock; + } + } + + printk("Clocks: Setting USB clock\n"); + usb_base = ar7_bus_clock; + calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, &usb_postdiv, &usb_mul); + tnetd7200_set_clock(usb_base, &clocks->usb, + usb_prediv, usb_postdiv, -1, usb_mul, + TNETD7200_DEF_USB_CLK); + + #warning FIXME: ????! Hrmm + ar7_dsp_clock = ar7_cpu_clock; + + iounmap(clocks); + iounmap(bootcr); +} + +void __init ar7_init_clocks(void) +{ + switch (ar7_chip_id()) { + case AR7_CHIP_7100: +#warning FIXME: Check if the new 7200 clock init works for 7100 + tnetd7200_init_clocks(); + break; + case AR7_CHIP_7200: + tnetd7200_init_clocks(); + break; + case AR7_CHIP_7300: + ar7_dsp_clock = tnetd7300_dsp_clock(); + tnetd7300_init_clocks(); + break; + default: + break; + } +} diff --git a/target/linux/ar7/files/arch/mips/ar7/gpio.c b/target/linux/ar7/files/arch/mips/ar7/gpio.c new file mode 100644 index 0000000000..8b3d3a958a --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/gpio.c @@ -0,0 +1,56 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static char *ar7_gpio_list[AR7_GPIO_MAX] = { 0, }; + +int gpio_request(unsigned gpio, char *label) +{ + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + if (ar7_gpio_list[gpio]) + return -EBUSY; + + if (label) { + ar7_gpio_list[gpio] = label; + } else { + ar7_gpio_list[gpio] = "busy"; + } + + return 0; +} +EXPORT_SYMBOL(gpio_request); + +void gpio_free(unsigned gpio) +{ + BUG_ON(!ar7_gpio_list[gpio]); + ar7_gpio_list[gpio] = NULL; +} +EXPORT_SYMBOL(gpio_free); diff --git a/target/linux/ar7/files/arch/mips/ar7/irq.c b/target/linux/ar7/files/arch/mips/ar7/irq.c new file mode 100644 index 0000000000..1a09aedc1a --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/irq.c @@ -0,0 +1,205 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#include +#include +#include +#include + +#define EXCEPT_OFFSET 0x80 +#define PACE_OFFSET 0xA0 +#define CHNLS_OFFSET 0x200 + +#define REG_OFFSET(irq, reg) ((irq) / 32 * 0x4 + reg * 0x10) +#define SEC_REG_OFFSET(reg) (EXCEPT_OFFSET + reg * 0x8) +#define SEC_SR_OFFSET (SEC_REG_OFFSET(0)) /* 0x80 */ +#define CR_OFFSET(irq) (REG_OFFSET(irq, 1)) /* 0x10 */ +#define SEC_CR_OFFSET (SEC_REG_OFFSET(1)) /* 0x88 */ +#define ESR_OFFSET(irq) (REG_OFFSET(irq, 2)) /* 0x20 */ +#define SEC_ESR_OFFSET (SEC_REG_OFFSET(2)) /* 0x90 */ +#define ECR_OFFSET(irq) (REG_OFFSET(irq, 3)) /* 0x30 */ +#define SEC_ECR_OFFSET (SEC_REG_OFFSET(3)) /* 0x98 */ +#define PIR_OFFSET (0x40) +#define MSR_OFFSET (0x44) +#define PM_OFFSET(irq) (REG_OFFSET(irq, 5)) /* 0x50 */ +#define TM_OFFSET(irq) (REG_OFFSET(irq, 6)) /* 0x60 */ + +#define REG(addr) (*(volatile u32 *)(KSEG1ADDR(AR7_REGS_IRQ) + addr)) + +#define CHNL_OFFSET(chnl) (CHNLS_OFFSET + (chnl * 4)) + +static void ar7_unmask_irq(unsigned int irq_nr); +static void ar7_mask_irq(unsigned int irq_nr); +static void ar7_unmask_secondary_irq(unsigned int irq_nr); +static void ar7_mask_secondary_irq(unsigned int irq_nr); +static irqreturn_t ar7_cascade(int interrupt, void *dev); +static irqreturn_t ar7_secondary_cascade(int interrupt, void *dev); +static void ar7_irq_init(int base); +static int ar7_irq_base; + +static struct irq_chip ar7_irq_type = { + .typename = "AR7", + .name = "AR7", + .unmask = ar7_unmask_irq, + .mask = ar7_mask_irq, +}; + +static struct irq_chip ar7_secondary_irq_type = { + .name = "AR7", + .unmask = ar7_unmask_secondary_irq, + .mask = ar7_mask_secondary_irq, +}; + +static struct irqaction ar7_cascade_action = { + .handler = ar7_cascade, + .name = "AR7 cascade interrupt" +}; + +static struct irqaction ar7_secondary_cascade_action = { + .handler = ar7_secondary_cascade, + .name = "AR7 secondary cascade interrupt" +}; + +static void ar7_unmask_irq(unsigned int irq) +{ + unsigned long flags; + local_irq_save(flags); + /* enable the interrupt channel bit */ + REG(ESR_OFFSET(irq)) = 1 << ((irq - ar7_irq_base) % 32); + local_irq_restore(flags); +} + +static void ar7_mask_irq(unsigned int irq) +{ + unsigned long flags; + local_irq_save(flags); + /* disable the interrupt channel bit */ + REG(ECR_OFFSET(irq)) = 1 << ((irq - ar7_irq_base) % 32); + local_irq_restore(flags); +} + +static void ar7_unmask_secondary_irq(unsigned int irq) +{ + unsigned long flags; + local_irq_save(flags); + /* enable the interrupt channel bit */ + REG(SEC_ESR_OFFSET) = 1 << (irq - ar7_irq_base - 40); + local_irq_restore(flags); +} + +static void ar7_mask_secondary_irq(unsigned int irq) +{ + unsigned long flags; + local_irq_save(flags); + /* disable the interrupt channel bit */ + REG(SEC_ECR_OFFSET) = 1 << (irq - ar7_irq_base - 40); + local_irq_restore(flags); +} + +void __init arch_init_irq(void) { + mips_cpu_irq_init(); + ar7_irq_init(8); +} + +static void __init ar7_irq_init(int base) +{ + int i; + /* + Disable interrupts and clear pending + */ + REG(ECR_OFFSET(0)) = 0xffffffff; + REG(ECR_OFFSET(32)) = 0xff; + REG(SEC_ECR_OFFSET) = 0xffffffff; + REG(CR_OFFSET(0)) = 0xffffffff; + REG(CR_OFFSET(32)) = 0xff; + REG(SEC_CR_OFFSET) = 0xffffffff; + + ar7_irq_base = base; + + for(i = 0; i < 40; i++) { + REG(CHNL_OFFSET(i)) = i; + /* Primary IRQ's */ + irq_desc[i + base].status = IRQ_DISABLED; + irq_desc[i + base].action = NULL; + irq_desc[i + base].depth = 1; + irq_desc[i + base].chip = &ar7_irq_type; + /* Secondary IRQ's */ + if (i < 32) { + irq_desc[i + base + 40].status = IRQ_DISABLED; + irq_desc[i + base + 40].action = NULL; + irq_desc[i + base + 40].depth = 1; + irq_desc[i + base + 40].chip = &ar7_secondary_irq_type; + } + } + + setup_irq(2, &ar7_cascade_action); + setup_irq(ar7_irq_base, &ar7_secondary_cascade_action); + set_c0_status(IE_IRQ0); +} + +static irqreturn_t ar7_cascade(int interrupt, void *dev) +{ + int irq; + + irq = (REG(PIR_OFFSET) & 0x3F); + REG(CR_OFFSET(irq)) = 1 << (irq % 32); + + do_IRQ(irq + ar7_irq_base); + + return IRQ_HANDLED; +} + +static irqreturn_t ar7_secondary_cascade(int interrupt, void *dev) +{ + int irq = 0, i; + unsigned long status; + + status = REG(SEC_SR_OFFSET); + if (unlikely(!status)) { + spurious_interrupt(); + return IRQ_NONE; + } + + for (i = 0; i < 32; i++) + if (status & (i << 1)) { + irq = i + 40; + REG(SEC_CR_OFFSET) = 1 << i; + break; + } + + do_IRQ(irq + ar7_irq_base); + + return IRQ_HANDLED; +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause(); + if (pending & STATUSF_IP7) /* cpu timer */ + do_IRQ(7); + else if (pending & STATUSF_IP2) /* int0 hardware line */ + do_IRQ(2); + else + spurious_interrupt(); +} diff --git a/target/linux/ar7/files/arch/mips/ar7/memory.c b/target/linux/ar7/files/arch/mips/ar7/memory.c new file mode 100644 index 0000000000..99faf217b7 --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/memory.c @@ -0,0 +1,75 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * + * Based on arch/mips/mm/init.c + * Copyright (C) 1994 - 2000 Ralf Baechle + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +static int __init memsize(void) +{ + u32 size = (64 << 20); + volatile u32 *addr = (u32 *)KSEG1ADDR(0x14000000 + size - 4); + u32 *kernel_end = (u32 *)KSEG1ADDR(CPHYSADDR((u32)&_end)); + + while (addr > kernel_end) { + *addr = (u32)addr; + size >>= 1; + addr -= size >> 2; + } + + do { + addr += size >> 2; + if (*addr != (u32)addr) + break; + size <<= 1; + } while (size < (64 << 20)); + + return size; +} + +void __init prom_meminit(void) +{ + unsigned long pages; + + pages = memsize() >> PAGE_SHIFT; + add_memory_region(ARCH_PFN_OFFSET << PAGE_SHIFT, pages << + PAGE_SHIFT, BOOT_MEM_RAM); +} + +void __init prom_free_prom_memory(void) +{ + return; +} diff --git a/target/linux/ar7/files/arch/mips/ar7/platform.c b/target/linux/ar7/files/arch/mips/ar7/platform.c new file mode 100644 index 0000000000..cae35bc229 --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/platform.c @@ -0,0 +1,412 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct plat_vlynq_data { + struct plat_vlynq_ops ops; + int gpio_bit; + int reset_bit; +}; + + +static int vlynq_on(struct vlynq_device *dev) +{ + int result; + struct plat_vlynq_data *pdata = dev->dev.platform_data; + + if ((result = gpio_request(pdata->gpio_bit, "vlynq"))) + goto out; + + ar7_device_reset(pdata->reset_bit); + + if ((result = ar7_gpio_disable(pdata->gpio_bit))) + goto out_enabled; + + if ((result = ar7_gpio_enable(pdata->gpio_bit))) + goto out_enabled; + + if ((result = gpio_direction_output(pdata->gpio_bit))) + goto out_gpio_enabled; + + gpio_set_value(pdata->gpio_bit, 0); + mdelay(50); + + gpio_set_value(pdata->gpio_bit, 1); + mdelay(50); + + return 0; + +out_gpio_enabled: + ar7_gpio_disable(pdata->gpio_bit); +out_enabled: + ar7_device_disable(pdata->reset_bit); + gpio_free(pdata->gpio_bit); +out: + return result; +} + +static void vlynq_off(struct vlynq_device *dev) +{ + struct plat_vlynq_data *pdata = dev->dev.platform_data; + ar7_gpio_disable(pdata->gpio_bit); + gpio_free(pdata->gpio_bit); + ar7_device_disable(pdata->reset_bit); +} + +static struct resource physmap_flash_resource = { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x10000000, + .end = 0x107fffff, +}; + +static struct resource cpmac_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC0, + .end = AR7_REGS_MAC0 + 0x7FF, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 27, + .end = 27, + }, +}; + +static struct resource cpmac_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC1, + .end = AR7_REGS_MAC1 + 0x7FF, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 41, + .end = 41, + }, +}; + +static struct resource vlynq_low_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ0, + .end = AR7_REGS_VLYNQ0 + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 29, + .end = 29, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x04000000, + .end = 0x04ffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 80, + .end = 111, + }, +}; + +static struct resource vlynq_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ1, + .end = AR7_REGS_VLYNQ1 + 0xFF, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 33, + .end = 33, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x0c000000, + .end = 0x0cffffff, + }, + { + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 112, + .end = 143, + }, +}; + +static struct physmap_flash_data physmap_flash_data = { + .width = 2, +}; + +static struct plat_cpmac_data cpmac_low_data = { + .reset_bit = 17, + .power_bit = 20, + .phy_mask = 0x80000000, +}; + +static struct plat_cpmac_data cpmac_high_data = { + .reset_bit = 21, + .power_bit = 22, + .phy_mask = 0x7fffffff, +}; + +static struct plat_vlynq_data vlynq_low_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 20, + .gpio_bit = 18, +}; + +static struct plat_vlynq_data vlynq_high_data = { + .ops.on = vlynq_on, + .ops.off = vlynq_off, + .reset_bit = 16, + .gpio_bit = 19, +}; + +static struct platform_device physmap_flash = { + .id = 0, + .name = "physmap-flash", + .dev.platform_data = &physmap_flash_data, + .resource = &physmap_flash_resource, + .num_resources = 1, +}; + +static struct platform_device cpmac_low = { + .id = 0, + .name = "cpmac", + .dev.platform_data = &cpmac_low_data, + .resource = cpmac_low_res, + .num_resources = ARRAY_SIZE(cpmac_low_res), +}; + +static struct platform_device cpmac_high = { + .id = 1, + .name = "cpmac", + .dev.platform_data = &cpmac_high_data, + .resource = cpmac_high_res, + .num_resources = ARRAY_SIZE(cpmac_high_res), +}; + +static struct platform_device vlynq_low = { + .id = 0, + .name = "vlynq", + .dev.platform_data = &vlynq_low_data, + .resource = vlynq_low_res, + .num_resources = ARRAY_SIZE(vlynq_low_res), +}; + +static struct platform_device vlynq_high = { + .id = 1, + .name = "vlynq", + .dev.platform_data = &vlynq_high_data, + .resource = vlynq_high_res, + .num_resources = ARRAY_SIZE(vlynq_high_res), +}; + + +/* This is proper way to define uart ports, but they are then detected + * as xscale and, obviously, don't work... + */ +#if !defined(CONFIG_SERIAL_8250) + +static struct plat_serial8250_port uart0_data = +{ + .mapbase = AR7_REGS_UART0, + .irq = AR7_IRQ_UART0, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, +}; + +static struct plat_serial8250_port uart1_data = +{ + .mapbase = UR8_REGS_UART1, + .irq = AR7_IRQ_UART1, + .regshift = 2, + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, +}; + +static struct plat_serial8250_port uart_data[] = { + uart0_data, + uart1_data, + { .flags = 0 } +}; + +static struct plat_serial8250_port uart_data_single[] = { + uart0_data, + { .flags = 0 } +}; + +static struct platform_device uart = { + .id = 0, + .name = "serial8250", + .dev.platform_data = uart_data_single +}; +#endif + +static inline unsigned char char2hex(char h) +{ + switch (h) { + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + return h - '0'; + case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': + return h - 'A' + 10; + case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': + return h - 'a' + 10; + default: + return 0; + } +} + +static void cpmac_get_mac(int instance, unsigned char *dev_addr) +{ + int i; + char name[5], default_mac[] = "00:00:00:12:34:56", *mac; + + mac = NULL; + sprintf(name, "mac%c", 'a' + instance); + mac = prom_getenv(name); + if (!mac) { + sprintf(name, "mac%c", 'a'); + mac = prom_getenv(name); + } + if (!mac) + mac = default_mac; + for (i = 0; i < 6; i++) + dev_addr[i] = (char2hex(mac[i * 3]) << 4) + + char2hex(mac[i * 3 + 1]); +} + +static int __init ar7_register_devices(void) +{ + int res; + +#ifdef CONFIG_SERIAL_8250 + + static struct uart_port uart_port[2]; + + memset(uart_port, 0, sizeof(struct uart_port) * 2); + + uart_port[0].type = PORT_AR7; + uart_port[0].line = 0; + uart_port[0].irq = AR7_IRQ_UART0; + uart_port[0].uartclk = ar7_bus_freq() / 2; + uart_port[0].iotype = UPIO_MEM; + uart_port[0].mapbase = AR7_REGS_UART0; + uart_port[0].membase = ioremap(uart_port[0].mapbase, 256); + uart_port[0].regshift = 2; + res = early_serial_setup(&uart_port[0]); + if (res) + return res; + + + // Only TNETD73xx have a second serial port + if (ar7_has_second_uart()) { + uart_port[1].type = PORT_AR7; + uart_port[1].line = 1; + uart_port[1].irq = AR7_IRQ_UART1; + uart_port[1].uartclk = ar7_bus_freq() / 2; + uart_port[1].iotype = UPIO_MEM; + uart_port[1].mapbase = UR8_REGS_UART1; + uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); + uart_port[1].regshift = 2; + res = early_serial_setup(&uart_port[1]); + if (res) + return res; + } + +#else // !CONFIG_SERIAL_8250 + + uart_data[0].uartclk = ar7_bus_freq() / 2; + uart_data[1].uartclk = uart_data[0].uartclk; + + // Only TNETD73xx have a second serial port + if (ar7_has_second_uart()) { + uart.dev.platform_data = uart_data; + } + + res = platform_device_register(&uart); + if (res) + return res; + +#endif // CONFIG_SERIAL_8250 + + res = platform_device_register(&physmap_flash); + if (res) + return res; + + res = platform_device_register(&vlynq_low); + if (res) + return res; + + ar7_device_disable(vlynq_low_data.reset_bit); + if (ar7_has_high_vlynq()) { + ar7_device_disable(vlynq_high_data.reset_bit); + res = platform_device_register(&vlynq_high); + if (res) + return res; + } + + if (ar7_has_high_cpmac()) { + cpmac_get_mac(1, cpmac_high_data.dev_addr); + res = platform_device_register(&cpmac_high); + if (res) + return res; + } else { + cpmac_low_data.phy_mask = 0xffffffff; + } + + cpmac_get_mac(0, cpmac_low_data.dev_addr); + res = platform_device_register(&cpmac_low); + + return res; +} + + +arch_initcall(ar7_register_devices); diff --git a/target/linux/ar7/files/arch/mips/ar7/prom.c b/target/linux/ar7/files/arch/mips/ar7/prom.c new file mode 100644 index 0000000000..28397427d0 --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/prom.c @@ -0,0 +1,327 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Putting things on the screen/serial line using YAMONs facilities. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define MAX_ENTRY 80 + +struct env_var { + char *name; + char *value; +}; + +static struct env_var adam2_env[MAX_ENTRY] = { { 0, }, }; + +char * prom_getenv(char *name) +{ + int i; + for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++) + if (!strcmp(name, adam2_env[i].name)) + return adam2_env[i].value; + + return NULL; +} + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +static void __init ar7_init_cmdline(int argc, char *argv[]) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while(actr < argc) { + strcpy(cp, argv[actr]); + cp += strlen(argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) { + /* get rid of trailing space */ + --cp; + *cp = '\0'; + } +} + +struct psbl_rec { + u32 psbl_size; + u32 env_base; + u32 env_size; + u32 ffs_base; + u32 ffs_size; +}; + +static __initdata char psp_env_version[] = "TIENV0.8"; + +struct psp_env_chunk { + u8 num; + u8 ctrl; + u16 csum; + u8 len; + char data[11]; +} __attribute__ ((packed)); + +struct psp_var_map_entry { + u8 num; + char *value; +}; + +static struct psp_var_map_entry psp_var_map[] = { + { 1, "cpufrequency" }, + { 2, "memsize" }, + { 3, "flashsize" }, + { 4, "modetty0" }, + { 5, "modetty1" }, + { 8, "maca" }, + { 9, "macb" }, + { 28, "sysfrequency" }, + { 38, "mipsfrequency" }, +}; + +/* + +Well-known variable (num is looked up in table above for matching variable name) +Example: cpufrequency=211968000 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| 01 |CTRL|CHECKSUM | 01 | _2 | _1 | _1 | _9 | _6 | _8 | _0 | _0 | _0 | \0 | FF | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ + +Name=Value pair in a single chunk +Example: NAME=VALUE ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| 00 |CTRL|CHECKSUM | 01 | _N | _A | _M | _E | _0 | _V | _A | _L | _U | _E | \0 | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ + +Name=Value pair in 2 chunks (len is the number of chunks) +Example: bootloaderVersion=1.3.7.15 ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| 00 |CTRL|CHECKSUM | 02 | _b | _o | _o | _t | _l | _o | _a | _d | _e | _r | _V | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ +| _e | _r | _s | _i | _o | _n | \0 | _1 | _. | _3 | _. | _7 | _. | _1 | _5 | \0 | ++----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+----+ + +Data is padded with 0xFF + +*/ + +#define PSP_ENV_SIZE 4096 + +static char psp_env_data[PSP_ENV_SIZE] = { 0, }; + +static char * __init lookup_psp_var_map(u8 num) +{ + int i; + + for (i = 0; i < sizeof(psp_var_map); i++) + if (psp_var_map[i].num == num) + return psp_var_map[i].value; + + return NULL; +} + +static void __init add_adam2_var(char *name, char *value) +{ + int i; + for (i = 0; i < MAX_ENTRY; i++) { + if (!adam2_env[i].name) { + adam2_env[i].name = name; + adam2_env[i].value = value; + return; + } else if (!strcmp(adam2_env[i].name, name)) { + adam2_env[i].value = value; + return; + } + } +} + +static int __init parse_psp_env(void *psp_env_base) +{ + int i, n; + char *name, *value; + struct psp_env_chunk *chunks = (struct psp_env_chunk *)psp_env_data; + + memcpy_fromio(chunks, psp_env_base, PSP_ENV_SIZE); + + i = 1; + n = PSP_ENV_SIZE / sizeof(struct psp_env_chunk); + while (i < n) { + if ((chunks[i].num == 0xff) || ((i + chunks[i].len) > n)) + break; + value = chunks[i].data; + if (chunks[i].num) { + name = lookup_psp_var_map(chunks[i].num); + } else { + name = value; + value += strlen(name) + 1; + } + if (name) + add_adam2_var(name, value); + i += chunks[i].len; + } + return 0; +} + +static void __init ar7_init_env(struct env_var *env) +{ + int i; + struct psbl_rec *psbl = (struct psbl_rec *)(KSEG1ADDR(0x14000300)); + void *psp_env = (void *)KSEG1ADDR(psbl->env_base); + + if(strcmp(psp_env, psp_env_version) == 0) { + parse_psp_env(psp_env); + } else { + for (i = 0; i < MAX_ENTRY; i++, env++) + if (env->name) + add_adam2_var(env->name, env->value); + } +} + +static void __init console_config(void) +{ +#ifdef CONFIG_SERIAL_8250_CONSOLE + char console_string[40]; + int baud = 0; + char parity = '\0', bits = '\0', flow = '\0'; + char *s, *p; + + if (strstr(prom_getcmdline(), "console=")) + return; + +#ifdef CONFIG_KGDB + if (!strstr(prom_getcmdline(), "nokgdb")) + { + strcat(prom_getcmdline(), " console=kgdb"); + kgdb_enabled = 1; + return; + } +#endif + + if ((s = prom_getenv("modetty0"))) { + baud = simple_strtoul(s, &p, 10); + s = p; + if (*s == ',') s++; + if (*s) parity = *s++; + if (*s == ',') s++; + if (*s) bits = *s++; + if (*s == ',') s++; + if (*s == 'h') flow = 'r'; + } + + if (baud == 0) + baud = 38400; + if (parity != 'n' && parity != 'o' && parity != 'e') + parity = 'n'; + if (bits != '7' && bits != '8') + bits = '8'; + if (flow == '\0') + flow = 'r'; + + sprintf(console_string, " console=ttyS0,%d%c%c%c", baud, + parity, bits, flow); + strcat(prom_getcmdline(), console_string); +#endif +} + +void __init prom_init(void) +{ + ar7_init_cmdline(fw_arg0, (char **)fw_arg1); + ar7_init_env((struct env_var *)fw_arg2); + console_config(); +} + +#define PORT(offset) (KSEG1ADDR(AR7_REGS_UART0 + (offset * 4))) +static inline unsigned int serial_in(int offset) +{ + return readb((void *)PORT(offset)); +} + +static inline void serial_out(int offset, int value) +{ + writeb(value, (void *)PORT(offset)); +} + +char prom_getchar(void) +{ + while (!(serial_in(UART_LSR) & UART_LSR_DR)); + return serial_in(UART_RX); +} + +int prom_putchar(char c) +{ + while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0); + serial_out(UART_TX, c); + return 1; +} + +// from adm5120/prom.c +void prom_printf(char *fmt, ...) +{ + va_list args; + int l; + char *p, *buf_end; + char buf[1024]; + + va_start(args, fmt); + l = vsprintf(buf, fmt, args); /* hopefully i < sizeof(buf) */ + va_end(args); + + buf_end = buf + l; + + for (p = buf; p < buf_end; p++) { + /* Crude cr/nl handling is better than none */ + if (*p == '\n') + prom_putchar('\r'); + prom_putchar(*p); + } +} + +#ifdef CONFIG_KGDB +int putDebugChar(char c) +{ + return prom_putchar(c); +} + +char getDebugChar(void) +{ + return prom_getchar(); +} +#endif + +EXPORT_SYMBOL(prom_getenv); diff --git a/target/linux/ar7/files/arch/mips/ar7/setup.c b/target/linux/ar7/files/arch/mips/ar7/setup.c new file mode 100644 index 0000000000..4abc39f1df --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/setup.c @@ -0,0 +1,124 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void ar7_time_init(void); +static void ar7_machine_restart(char *command); +static void ar7_machine_halt(void); +static void ar7_machine_power_off(void); + +static void ar7_machine_restart(char *command) +{ + volatile u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET + + AR7_RESET_SOFTWARE, 1); + *softres_reg = 1; +} + +static void ar7_machine_halt(void) +{ + while (1); +} + +static void ar7_machine_power_off(void) +{ + volatile u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1); + u32 power_state = *power_reg | (3 << 30); + *power_reg = power_state; + ar7_machine_halt(); +} + +const char *get_system_type(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7300: + return "TI AR7 (TNETD7300)"; + case AR7_CHIP_7100: + return "TI AR7 (TNETD7100)"; + case AR7_CHIP_7200: + return "TI AR7 (TNETD7200)"; + default: + return "TI AR7 (Unknown)"; + } +} + +static int __init ar7_init_console(void) +{ + return 0; +} + +/* + * Initializes basic routines and structures pointers, memory size (as + * given by the bios and saves the command line. + */ + +extern void ar7_init_clocks(void); + +void __init plat_mem_setup(void) +{ + unsigned long io_base; + + _machine_restart = ar7_machine_restart; + _machine_halt = ar7_machine_halt; + pm_power_off = ar7_machine_power_off; + board_time_init = ar7_time_init; + panic_timeout = 3; + + io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000); + if (!io_base) panic("Can't remap IO base!\n"); + set_io_port_base(io_base); + + prom_meminit(); +#warning FIXME: clock initialisation + ar7_init_clocks(); + + ioport_resource.start = 0; + ioport_resource.end = ~0; + iomem_resource.start = 0; + iomem_resource.end = ~0; + + printk("%s, ID: 0x%04x, Revision: 0x%02x\n", get_system_type(), + ar7_chip_id(), ar7_chip_rev()); +} + +console_initcall(ar7_init_console); diff --git a/target/linux/ar7/files/arch/mips/ar7/time.c b/target/linux/ar7/files/arch/mips/ar7/time.c new file mode 100644 index 0000000000..6a1ee7a4df --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/time.c @@ -0,0 +1,59 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * Setting up the clock on the MIPS boards. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +void __init ar7_time_init(void) +{ + mips_hpt_frequency = ar7_cpu_freq() / 2; +} + +void __init plat_timer_setup(struct irqaction *irq) +{ + setup_irq(7, irq); +} diff --git a/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c b/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c new file mode 100644 index 0000000000..eb11a3b002 --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/vlynq-pci.c @@ -0,0 +1,402 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include + +#define VLYNQ_PCI_SLOTS 2 + +struct vlynq_reg_config { + u32 offset; + u32 value; +}; + +struct vlynq_pci_config { + u32 chip_id; + char name[32]; + struct vlynq_mapping rx_mapping[4]; + int irq; + int irq_type; + u32 chip; + u32 class; + int num_regs; + struct vlynq_reg_config regs[10]; +}; + +struct vlynq_pci_private { + u32 latency; + u32 cache_line; + u32 command; + u32 sz_mask; + struct vlynq_pci_config *config; +}; + +static struct vlynq_pci_config known_devices[] = { + { + .chip_id = 0x00000009, .name = "TI ACX111", + .rx_mapping = { + { .size = 0x22000, .offset = 0xf0000000 }, + { .size = 0x40000, .offset = 0xc0000000 }, + { .size = 0x0, .offset = 0x0 }, + { .size = 0x0, .offset = 0x0 }, + }, + .irq = 0, .chip = 0x9066104c, + .irq_type = IRQ_TYPE_EDGE_RISING, + .class = PCI_CLASS_NETWORK_OTHER, + .num_regs = 5, + .regs = { + { .offset = 0x790, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) }, + { .offset = 0x794, .value = (0xd0000000 - (ARCH_PFN_OFFSET << PAGE_SHIFT)) }, + { .offset = 0x740, .value = 0 }, + { .offset = 0x744, .value = 0x00010000 }, + { .offset = 0x764, .value = 0x00010000 }, + }, + }, +}; + +static struct vlynq_device *slots[VLYNQ_PCI_SLOTS] = { NULL, }; + +static struct resource vlynq_io_resource = { + .start = 0x00000000, + .end = 0x00000000, + .name = "pci IO space", + .flags = IORESOURCE_IO +}; + +static struct resource vlynq_mem_resource = { + .start = 0x00000000, + .end = 0x00000000, + .name = "pci memory space", + .flags = IORESOURCE_MEM +}; + +static inline u32 vlynq_get_mapped(struct vlynq_device *dev, int res) +{ + int i; + struct vlynq_pci_private *priv = dev->priv; + u32 ret = dev->mem_start; + if (!priv->config->rx_mapping[res].size) return 0; + for (i = 0; i < res; i++) + ret += priv->config->rx_mapping[i].size; + + return ret; +} + +static inline u32 vlynq_read(u32 val, int size) { + switch (size) { + case 1: + return *(u8 *)&val; + case 2: + return *(u16 *)&val; + } + return val; +} + +static int vlynq_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) +{ + struct vlynq_device *dev; + struct vlynq_pci_private *priv; + int resno, slot = PCI_SLOT(devfn); + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (slot >= VLYNQ_PCI_SLOTS) + return PCIBIOS_DEVICE_NOT_FOUND; + + dev = slots[slot]; + + if (!dev || (PCI_FUNC(devfn) > 0)) + return PCIBIOS_DEVICE_NOT_FOUND; + + priv = dev->priv; + + switch (where) { + case PCI_VENDOR_ID: + *val = vlynq_read(priv->config->chip, size); + break; + case PCI_DEVICE_ID: + *val = priv->config->chip & 0xffff; + case PCI_COMMAND: + *val = priv->command; + case PCI_STATUS: +/* *val = PCI_STATUS_CAP_LIST;*/ + *val = 0; + break; + case PCI_CLASS_REVISION: + *val = priv->config->class; + break; + case PCI_LATENCY_TIMER: + *val = priv->latency; + break; + case PCI_HEADER_TYPE: + *val = PCI_HEADER_TYPE_NORMAL; + break; + case PCI_CACHE_LINE_SIZE: + *val = priv->cache_line; + break; + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + case PCI_BASE_ADDRESS_2: + case PCI_BASE_ADDRESS_3: + resno = (where - PCI_BASE_ADDRESS_0) >> 2; + if (priv->sz_mask & (1 << resno)) { + priv->sz_mask &= ~(1 << resno); + *val = priv->config->rx_mapping[resno].size; + } else { + *val = vlynq_get_mapped(dev, resno); + } + break; + case PCI_BASE_ADDRESS_4: + case PCI_BASE_ADDRESS_5: + case PCI_SUBSYSTEM_VENDOR_ID: + case PCI_SUBSYSTEM_ID: + case PCI_ROM_ADDRESS: + case PCI_INTERRUPT_LINE: + case PCI_CARDBUS_CIS: + case PCI_CAPABILITY_LIST: + *val = 0; + break; + case PCI_INTERRUPT_PIN: + *val = 1; + break; + default: + printk("%s: Read of unknown register 0x%x (size %d)\n", + dev->dev.bus_id, where, size); + return PCIBIOS_BAD_REGISTER_NUMBER; + } + return PCIBIOS_SUCCESSFUL; +} + +static int vlynq_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) +{ + struct vlynq_device *dev; + struct vlynq_pci_private *priv; + int resno, slot = PCI_SLOT(devfn); + + if ((size == 2) && (where & 1)) + return PCIBIOS_BAD_REGISTER_NUMBER; + else if ((size == 4) && (where & 3)) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (slot >= VLYNQ_PCI_SLOTS) + return PCIBIOS_DEVICE_NOT_FOUND; + + dev = slots[slot]; + + if (!dev || (PCI_FUNC(devfn) > 0)) + return PCIBIOS_DEVICE_NOT_FOUND; + + priv = dev->priv; + + switch (where) { + case PCI_VENDOR_ID: + case PCI_DEVICE_ID: + case PCI_STATUS: + case PCI_CLASS_REVISION: + case PCI_HEADER_TYPE: + case PCI_CACHE_LINE_SIZE: + case PCI_SUBSYSTEM_VENDOR_ID: + case PCI_SUBSYSTEM_ID: + case PCI_INTERRUPT_LINE: + case PCI_INTERRUPT_PIN: + case PCI_CARDBUS_CIS: + case PCI_CAPABILITY_LIST: + return PCIBIOS_FUNC_NOT_SUPPORTED; + case PCI_COMMAND: + priv->command = val; + case PCI_LATENCY_TIMER: + priv->latency = val; + break; + case PCI_BASE_ADDRESS_0: + case PCI_BASE_ADDRESS_1: + case PCI_BASE_ADDRESS_2: + case PCI_BASE_ADDRESS_3: + if (val == 0xffffffff) { + resno = (where - PCI_BASE_ADDRESS_0) >> 2; + priv->sz_mask |= (1 << resno); + break; + } + case PCI_BASE_ADDRESS_4: + case PCI_BASE_ADDRESS_5: + case PCI_ROM_ADDRESS: + break; + default: + printk("%s: Write to unknown register 0x%x (size %d) value=0x%x\n", + dev->dev.bus_id, where, size, val); + return PCIBIOS_BAD_REGISTER_NUMBER; + } + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops vlynq_pci_ops = { + vlynq_config_read, + vlynq_config_write +}; + +static struct pci_controller vlynq_controller = { + .pci_ops = &vlynq_pci_ops, + .io_resource = &vlynq_io_resource, + .mem_resource = &vlynq_mem_resource, +}; + +static int vlynq_pci_probe(struct vlynq_device *dev) +{ + int result, i; + u32 chip_id, addr; + struct vlynq_pci_private *priv; + struct vlynq_mapping mapping[4] = { { 0, }, }; + struct vlynq_pci_config *config = NULL; + + result = vlynq_set_local_irq(dev, 31); + if (result) + return result; + + result = vlynq_set_remote_irq(dev, 30); + if (result) + return result; + + result = vlynq_device_enable(dev); + if (result) + return result; + + chip_id = vlynq_remote_id(dev); + for (i = 0; i < ARRAY_SIZE(known_devices); i++) + if (chip_id == known_devices[i].chip_id) + config = &known_devices[i]; + + if (!config) { + printk("vlynq-pci: skipping unknown device " + "%04x:%04x at %s\n", chip_id >> 16, + chip_id & 0xffff, dev->dev.bus_id); + result = -ENODEV; + goto fail; + } + + printk("vlynq-pci: attaching device %s at %s\n", + config->name, dev->dev.bus_id); + + priv = kmalloc(sizeof(struct vlynq_pci_private), GFP_KERNEL); + if (!priv) { + printk(KERN_ERR "%s: failed to allocate private data\n", + dev->dev.bus_id); + result = -ENOMEM; + goto fail; + } + + memset(priv, 0, sizeof(struct vlynq_pci_private)); + priv->latency = 64; + priv->cache_line = 32; + priv->config = config; + + mapping[0].offset = ARCH_PFN_OFFSET << PAGE_SHIFT; + mapping[0].size = 0x02000000; + vlynq_set_local_mapping(dev, dev->mem_start, mapping); + vlynq_set_remote_mapping(dev, 0, config->rx_mapping); + + set_irq_type(vlynq_virq_to_irq(dev, config->irq), config->irq_type); + + addr = (u32)ioremap_nocache(dev->mem_start, 0x10000); + if (!addr) { + printk(KERN_ERR "%s: failed to remap io memory\n", + dev->dev.bus_id); + result = -ENXIO; + goto fail; + } + + for (i = 0; i < config->num_regs; i++) + *(volatile u32 *)(addr + config->regs[i].offset) = + config->regs[i].value; + + dev->priv = priv; + for (i = 0; i < VLYNQ_PCI_SLOTS; i++) { + if (!slots[i]) { + slots[i] = dev; + break; + } + } + + return 0; + +fail: + vlynq_device_disable(dev); + + return result; +} + +static int vlynq_pci_remove(struct vlynq_device *dev) +{ + int i; + struct vlynq_pci_private *priv = dev->priv; + + for (i = 0; i < VLYNQ_PCI_SLOTS; i++) + if (slots[i] == dev) + slots[i] = NULL; + + vlynq_device_disable(dev); + kfree(priv); + + return 0; +} + +static struct vlynq_driver vlynq_pci = { + .name = "PCI over VLYNQ emulation", + .probe = vlynq_pci_probe, + .remove = vlynq_pci_remove, +}; + +int vlynq_pci_init(void) +{ + int res; + res = vlynq_register_driver(&vlynq_pci); + if (res) + return res; + + register_pci_controller(&vlynq_controller); + + return 0; +} + +int pcibios_map_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + struct vlynq_device *dev; + struct vlynq_pci_private *priv; + + dev = slots[slot]; + + if (!dev) + return 0; + + priv = dev->priv; + + return vlynq_virq_to_irq(dev, priv->config->irq); +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/target/linux/ar7/files/arch/mips/ar7/vlynq.c b/target/linux/ar7/files/arch/mips/ar7/vlynq.c new file mode 100644 index 0000000000..c9be214721 --- /dev/null +++ b/target/linux/ar7/files/arch/mips/ar7/vlynq.c @@ -0,0 +1,553 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PER_DEVICE_IRQS 32 + +#define VLYNQ_CTRL_PM_ENABLE 0x80000000 +#define VLYNQ_CTRL_CLOCK_INT 0x00008000 +#define VLYNQ_CTRL_CLOCK_DIV(x) ((x & 7) << 16) +#define VLYNQ_CTRL_INT_LOCAL 0x00004000 +#define VLYNQ_CTRL_INT_ENABLE 0x00002000 +#define VLYNQ_CTRL_INT_VECTOR(x) ((x & 0x1f) << 8) +#define VLYNQ_CTRL_INT2CFG 0x00000080 +#define VLYNQ_CTRL_RESET 0x00000001 + +#define VLYNQ_STATUS_RERROR 0x00000100 +#define VLYNQ_STATUS_LERROR 0x00000080 +#define VLYNQ_STATUS_LINK 0x00000001 + +#define VINT_ENABLE 0x00000100 +#define VINT_TYPE_EDGE 0x00000080 +#define VINT_LEVEL_LOW 0x00000040 +#define VINT_VECTOR(x) (x & 0x1f) +#define VINT_OFFSET(irq) (8 * ((irq) % 4)) + +#define VLYNQ_AUTONEGO_V2 0x00010000 + +struct vlynq_regs { + volatile u32 revision; + volatile u32 control; + volatile u32 status; + volatile u32 int_prio; + volatile u32 int_status; + volatile u32 int_pending; + volatile u32 int_ptr; + volatile u32 tx_offset; + volatile struct vlynq_mapping rx_mapping[4]; + volatile u32 chip; + volatile u32 autonego; + volatile u32 unused[6]; + volatile u32 int_device[8]; +} __attribute__ ((packed)); + +#ifdef VLYNQ_DEBUG +static void vlynq_dump_regs(struct vlynq_device *dev) +{ + int i; + printk("VLYNQ local=%p remote=%p\n", dev->local, dev->remote); + for (i = 0; i < 32; i++) { + printk("VLYNQ: local %d: %08x\n", i + 1, ((u32 *)dev->local)[i]); + printk("VLYNQ: remote %d: %08x\n", i + 1, ((u32 *)dev->remote)[i]); + } +} + +static void vlynq_dump_mem(u32 *base, int count) +{ + int i; + for (i = 0; i < (count + 3) / 4; i++) { + if (i % 4 == 0) printk("\nMEM[0x%04x]:", i * 4); + printk(" 0x%08x", *(base + i)); + } + printk("\n"); +} +#endif + +int vlynq_linked(struct vlynq_device *dev) +{ + int i; + for (i = 0; i < 10; i++) + if (dev->local->status & VLYNQ_STATUS_LINK) { + printk("%s: linked\n", dev->dev.bus_id); + return 1; + } else { + mdelay(1); + } + return 0; +} + +static void vlynq_irq_unmask(unsigned int irq) +{ + volatile u32 val; + struct vlynq_device *dev = irq_desc[irq].chip_data; + int virq; + + BUG_ON(!dev); + virq = irq - dev->irq_start; + val = dev->remote->int_device[virq >> 2]; + val |= (VINT_ENABLE | virq) << VINT_OFFSET(virq); + dev->remote->int_device[virq >> 2] = val; +} + +static void vlynq_irq_mask(unsigned int irq) +{ + volatile u32 val; + struct vlynq_device *dev = irq_desc[irq].chip_data; + int virq; + + BUG_ON(!dev); + virq = irq - dev->irq_start; + val = dev->remote->int_device[virq >> 2]; + val &= ~(VINT_ENABLE << VINT_OFFSET(virq)); + dev->remote->int_device[virq >> 2] = val; +} + +static int vlynq_irq_type(unsigned int irq, unsigned int flow_type) +{ + volatile u32 val; + struct vlynq_device *dev = irq_desc[irq].chip_data; + int virq; + + BUG_ON(!dev); + virq = irq - dev->irq_start; + val = dev->remote->int_device[virq >> 2]; + switch (flow_type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_RISING: + case IRQ_TYPE_EDGE_FALLING: + case IRQ_TYPE_EDGE_BOTH: + val |= VINT_TYPE_EDGE << VINT_OFFSET(virq); + val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); + break; + case IRQ_TYPE_LEVEL_HIGH: + val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); + val &= ~(VINT_LEVEL_LOW << VINT_OFFSET(virq)); + break; + case IRQ_TYPE_LEVEL_LOW: + val &= ~(VINT_TYPE_EDGE << VINT_OFFSET(virq)); + val |= VINT_LEVEL_LOW << VINT_OFFSET(virq); + break; + default: + return -EINVAL; + } + dev->remote->int_device[virq >> 2] = val; + return 0; +} + +static irqreturn_t vlynq_irq(int irq, void *dev_id) +{ + struct vlynq_device *dev = dev_id; + u32 status, ack; + int virq = 0; + + status = dev->local->int_status; + dev->local->int_status = status; + + if (status & (1 << dev->local_irq)) { /* Local vlynq IRQ. Ack */ + ack = dev->local->status; + dev->local->status = ack; + } + + if (status & (1 << dev->remote_irq)) { /* Remote vlynq IRQ. Ack */ + ack = dev->remote->status; + dev->remote->status = ack; + } + + status &= ~((1 << dev->local_irq) | (1 << dev->remote_irq)); + while (status) { + if (status & 1) /* Remote device IRQ. Pass. */ + do_IRQ(dev->irq_start + virq); + status >>= 1; + virq++; + } + + return IRQ_HANDLED; +} + +static struct irq_chip vlynq_irq_chip = { + .typename = "VLYNQ", + .name = "vlynq", + .unmask = vlynq_irq_unmask, + .mask = vlynq_irq_mask, + .set_type = vlynq_irq_type, +}; + +static int vlynq_setup_irq(struct vlynq_device *dev) +{ + u32 val; + int i; + + if (dev->local_irq == dev->remote_irq) { + printk("%s: local vlynq irq should be different from remote\n", + dev->dev.bus_id); + return -EINVAL; + } + + val = VLYNQ_CTRL_INT_VECTOR(dev->local_irq); + val |= VLYNQ_CTRL_INT_ENABLE | VLYNQ_CTRL_INT_LOCAL | + VLYNQ_CTRL_INT2CFG; + dev->local->int_ptr = 0x14; + dev->local->control |= val; + + val = VLYNQ_CTRL_INT_VECTOR(dev->remote_irq); + val |= VLYNQ_CTRL_INT_ENABLE; + dev->remote->int_ptr = 0x14; + dev->remote->control |= val; + + for (i = 0; i < PER_DEVICE_IRQS; i++) { + if ((i == dev->local_irq) || (i == dev->remote_irq)) + continue; + irq_desc[dev->irq_start + i].status = IRQ_DISABLED; + irq_desc[dev->irq_start + i].action = 0; + irq_desc[dev->irq_start + i].depth = 1; + irq_desc[dev->irq_start + i].chip = &vlynq_irq_chip; + irq_desc[dev->irq_start + i].chip_data = dev; + dev->remote->int_device[i >> 2] = 0; + } + + if (request_irq(dev->irq, vlynq_irq, SA_SHIRQ, "vlynq", dev)) { + printk("%s: request_irq failed\n", dev->dev.bus_id); + return -EAGAIN; + } + + return 0; +} + +static void vlynq_free_irq(struct vlynq_device *dev) +{ + free_irq(dev->irq, dev); +} + +static void vlynq_device_release(struct device *dev) +{ + struct vlynq_device *vdev = to_vlynq_device(dev); + kfree(vdev); +} + +static int vlynq_device_probe(struct device *dev) +{ + struct vlynq_driver *drv = to_vlynq_driver(dev->driver); + if (drv->probe) + return drv->probe(to_vlynq_device(dev)); + return 0; +} + +static int vlynq_device_remove(struct device *dev) +{ + struct vlynq_driver *drv = to_vlynq_driver(dev->driver); + if (drv->remove) + return drv->remove(to_vlynq_device(dev)); + return 0; +} + +int __vlynq_register_driver(struct vlynq_driver *driver, struct module *owner) +{ + driver->driver.name = driver->name; + driver->driver.bus = &vlynq_bus_type; +/* driver->driver.owner = owner;*/ + return driver_register(&driver->driver); +} +EXPORT_SYMBOL(__vlynq_register_driver); + +void vlynq_unregister_driver(struct vlynq_driver *driver) +{ + driver_unregister(&driver->driver); +} +EXPORT_SYMBOL(vlynq_unregister_driver); + +int vlynq_device_enable(struct vlynq_device *dev) +{ + u32 div; + int result; + struct plat_vlynq_ops *ops = dev->dev.platform_data; + + result = ops->on(dev); + if (result) + return result; + + dev->local->control = 0; + dev->remote->control = 0; + dev->local->control = VLYNQ_CTRL_CLOCK_INT; + + div = ar7_dsp_freq() / 62500000; + if (div != 0 ) { + if (ar7_dsp_freq() / div != 62500000) { + printk(KERN_WARNING + "VLYNQ: Adjusted requested frequency %d to %d\n", + 62500000, ar7_dsp_freq() / div); + } + + printk("VLYNQ: Setting clock to %d (clock divider %u)\n", + ar7_dsp_freq() / div, div); + dev->local->control |= VLYNQ_CTRL_CLOCK_DIV((div - 1)); + } + if (vlynq_linked(dev)) + return vlynq_setup_irq(dev); + + return -ENODEV; +} + +void vlynq_device_disable(struct vlynq_device *dev) +{ + struct plat_vlynq_ops *ops = dev->dev.platform_data; + + vlynq_free_irq(dev); + ops->off(dev); +} + +u32 vlynq_local_id(struct vlynq_device *dev) +{ + return dev->local->chip; +} + +u32 vlynq_remote_id(struct vlynq_device *dev) +{ + return dev->remote->chip; +} + +void vlynq_set_local_mapping(struct vlynq_device *dev, u32 tx_offset, + struct vlynq_mapping *mapping) +{ + int i; + + dev->local->tx_offset = tx_offset; + for (i = 0; i < 4; i++) { + dev->local->rx_mapping[i].offset = mapping[i].offset; + dev->local->rx_mapping[i].size = mapping[i].size; + } +} + +void vlynq_set_remote_mapping(struct vlynq_device *dev, u32 tx_offset, + struct vlynq_mapping *mapping) +{ + int i; + + dev->remote->tx_offset = tx_offset; + for (i = 0; i < 4; i++) { + dev->remote->rx_mapping[i].offset = mapping[i].offset; + dev->remote->rx_mapping[i].size = mapping[i].size; + } +} + +int vlynq_virq_to_irq(struct vlynq_device *dev, int virq) +{ + if ((virq < 0) || (virq >= PER_DEVICE_IRQS)) + return -EINVAL; + + if ((virq == dev->local_irq) || (virq == dev->remote_irq)) + return -EINVAL; + + return dev->irq_start + virq; +} + +int vlynq_irq_to_virq(struct vlynq_device *dev, int irq) +{ + if ((irq < dev->irq_start) || (irq >= dev->irq_start + PER_DEVICE_IRQS)) + return -EINVAL; + + return irq - dev->irq_start; +} + +int vlynq_set_local_irq(struct vlynq_device *dev, int virq) +{ + if ((virq < 0) || (virq >= PER_DEVICE_IRQS)) + return -EINVAL; + + if (virq == dev->remote_irq) + return -EINVAL; + + dev->local_irq = virq; + + return 0; +} + +int vlynq_set_remote_irq(struct vlynq_device *dev, int virq) +{ + if ((virq < 0) || (virq >= PER_DEVICE_IRQS)) + return -EINVAL; + + if (virq == dev->local_irq) + return -EINVAL; + + dev->remote_irq = virq; + + return 0; +} + +static int vlynq_probe(struct platform_device *pdev) +{ + struct vlynq_device *dev; + struct resource *regs_res, *mem_res, *irq_res; + int len, result; + + if (strcmp(pdev->name, "vlynq")) + return -ENODEV; + + regs_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + if (!regs_res) + return -ENODEV; + + mem_res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mem"); + if (!mem_res) + return -ENODEV; + + irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "devirq"); + if (!irq_res) + return -ENODEV; + + dev = kmalloc(sizeof(struct vlynq_device), GFP_KERNEL); + if (!dev) { + printk(KERN_ERR "vlynq: failed to allocate device structure\n"); + return -ENOMEM; + } + + memset(dev, 0, sizeof(struct vlynq_device)); + + dev->id = pdev->id; + dev->dev.bus = &vlynq_bus_type; + dev->dev.parent = &pdev->dev; + snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id); + dev->dev.bus_id[BUS_ID_SIZE - 1] = 0; + dev->dev.platform_data = pdev->dev.platform_data; + dev->dev.release = vlynq_device_release; + + dev->regs_start = regs_res->start; + dev->regs_end = regs_res->end; + dev->mem_start = mem_res->start; + dev->mem_end = mem_res->end; + + len = regs_res->end - regs_res->start; + if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) { + printk("%s: Can't request vlynq registers\n", dev->dev.bus_id); + result = -ENXIO; + goto fail_request; + } + + dev->local = ioremap_nocache(regs_res->start, len); + if (!dev->local) { + printk("%s: Can't remap vlynq registers\n", dev->dev.bus_id); + result = -ENXIO; + goto fail_remap; + } + + dev->remote = (struct vlynq_regs *)((u32)dev->local + 128); + + dev->irq = platform_get_irq_byname(pdev, "irq"); + dev->irq_start = irq_res->start; + dev->irq_end = irq_res->end; + dev->local_irq = 31; + dev->remote_irq = 30; + + if (device_register(&dev->dev)) + goto fail_register; + platform_set_drvdata(pdev, dev); + + printk("%s: regs 0x%p, irq %d, mem 0x%p\n", + dev->dev.bus_id, (void *)dev->regs_start, dev->irq, + (void *)dev->mem_start); + + return 0; + +fail_register: +fail_remap: + iounmap(dev->local); +fail_request: + release_mem_region(regs_res->start, len); + kfree(dev); + return result; +} + +static int vlynq_remove(struct platform_device *pdev) +{ + struct vlynq_device *dev = platform_get_drvdata(pdev); + + device_unregister(&dev->dev); + release_mem_region(dev->regs_start, dev->regs_end - dev->regs_start); + + kfree(dev); + + return 0; +} + +static struct platform_driver vlynq_driver = { + .driver.name = "vlynq", + .probe = vlynq_probe, + .remove = vlynq_remove, +}; + +struct bus_type vlynq_bus_type = { + .name = "vlynq", + .probe = vlynq_device_probe, + .remove = vlynq_device_remove, +}; +EXPORT_SYMBOL(vlynq_bus_type); + +#ifdef CONFIG_PCI +extern void vlynq_pci_init(void); +#endif +int __init vlynq_init(void) +{ + int res = 0; + + res = bus_register(&vlynq_bus_type); + if (res) + goto fail_bus; + + res = platform_driver_register(&vlynq_driver); + if (res) + goto fail_platform; + +#ifdef CONFIG_PCI + vlynq_pci_init(); +#endif + + return 0; + +fail_platform: + bus_unregister(&vlynq_bus_type); +fail_bus: + return res; +} + +/* +void __devexit vlynq_exit(void) +{ + platform_driver_unregister(&vlynq_driver); + bus_unregister(&vlynq_bus_type); +} +*/ + + +subsys_initcall(vlynq_init); diff --git a/target/linux/ar7/files/drivers/char/ar7_gpio.c b/target/linux/ar7/files/drivers/char/ar7_gpio.c new file mode 100644 index 0000000000..a5245da356 --- /dev/null +++ b/target/linux/ar7/files/drivers/char/ar7_gpio.c @@ -0,0 +1,161 @@ +/* + * linux/drivers/char/ar7_gpio.c + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define DRVNAME "ar7_gpio" +#define LONGNAME "TI AR7 GPIOs Driver" + +MODULE_AUTHOR("Nicolas Thill "); +MODULE_DESCRIPTION(LONGNAME); +MODULE_LICENSE("GPL"); + +static int ar7_gpio_major = 0; + +static ssize_t ar7_gpio_write(struct file *file, const char __user *buf, + size_t len, loff_t *ppos) +{ + int pin = iminor(file->f_dentry->d_inode); + size_t i; + + for (i = 0; i < len; ++i) { + char c; + if (get_user(c, buf + i)) + return -EFAULT; + switch (c) { + case '0': + gpio_set_value(pin, 0); + break; + case '1': + gpio_set_value(pin, 1); + break; + case 'd': + case 'D': + ar7_gpio_disable(pin); + break; + case 'e': + case 'E': + ar7_gpio_enable(pin); + break; + case 'i': + case 'I': + case '<': + gpio_direction_input(pin); + break; + case 'o': + case 'O': + case '>': + gpio_direction_output(pin); + break; + default: + return -EINVAL; + } + } + + return len; +} + +static ssize_t ar7_gpio_read(struct file *file, char __user * buf, + size_t len, loff_t * ppos) +{ + int pin = iminor(file->f_dentry->d_inode); + int value; + + value = gpio_get_value(pin); + if (put_user(value ? '1' : '0', buf)) + return -EFAULT; + + return 1; +} + +static int ar7_gpio_open(struct inode *inode, struct file *file) +{ + int m = iminor(inode); + + if (m >= AR7_GPIO_MAX) + return -EINVAL; + + return nonseekable_open(inode, file); +} + +static int ar7_gpio_release(struct inode *inode, struct file *file) +{ + return 0; +} + +static const struct file_operations ar7_gpio_fops = { + .owner = THIS_MODULE, + .write = ar7_gpio_write, + .read = ar7_gpio_read, + .open = ar7_gpio_open, + .release = ar7_gpio_release, + .llseek = no_llseek, +}; + +static struct platform_device *ar7_gpio_device; + +static int __init ar7_gpio_init(void) +{ + int rc; + + ar7_gpio_device = platform_device_alloc(DRVNAME, -1); + if (!ar7_gpio_device) + return -ENOMEM; + + rc = platform_device_add(ar7_gpio_device); + if (rc < 0) + goto out_put; + + rc = register_chrdev(ar7_gpio_major, DRVNAME, &ar7_gpio_fops); + if (rc < 0) + goto out_put; + + ar7_gpio_major = rc; + + rc = 0; + + goto out; + +out_put: + platform_device_put(ar7_gpio_device); +out: + return rc; +} + +static void __exit ar7_gpio_exit(void) +{ + unregister_chrdev(ar7_gpio_major, DRVNAME); + platform_device_unregister(ar7_gpio_device); +} + +module_init(ar7_gpio_init); +module_exit(ar7_gpio_exit); diff --git a/target/linux/ar7/files/drivers/char/watchdog/ar7_wdt.c b/target/linux/ar7/files/drivers/char/watchdog/ar7_wdt.c new file mode 100644 index 0000000000..50dfb5ef3c --- /dev/null +++ b/target/linux/ar7/files/drivers/char/watchdog/ar7_wdt.c @@ -0,0 +1,345 @@ +/* + * linux/drivers/char/ar7_wdt.c + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (c) 2005 Enrik Berkhan + * + * Some code taken from: + * National Semiconductor SCx200 Watchdog support + * Copyright (c) 2001,2002 Christer Weinigel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include + +#define DRVNAME "ar7_wdt" +#define LONGNAME "TI AR7 Watchdog Timer" + +MODULE_AUTHOR("Nicolas Thill "); +MODULE_DESCRIPTION(LONGNAME); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +static int margin = 60; +module_param(margin, int, 0); +MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); + +typedef struct { + u32 kick_lock; + u32 kick; + u32 change_lock; + u32 change ; + u32 disable_lock; + u32 disable; + u32 prescale_lock; + u32 prescale; +} ar7_wdt_t; + +static struct semaphore open_semaphore; +static unsigned expect_close; + +/* XXX currently fixed, allows max margin ~68.72 secs */ +#define prescale_value 0xFFFF + +// Offset of the WDT registers +static unsigned long ar7_regs_wdt; +// Pointer to the remapped WDT IO space +static ar7_wdt_t *ar7_wdt; +static void ar7_wdt_get_regs(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) + { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + ar7_regs_wdt = AR7_REGS_WDT; + break; + default: + ar7_regs_wdt = UR8_REGS_WDT; + break; + } +} + +static void ar7_wdt_kick(u32 value) +{ + ar7_wdt->kick_lock = 0x5555; + if ((ar7_wdt->kick_lock & 3) == 1) { + ar7_wdt->kick_lock = 0xAAAA; + if ((ar7_wdt->kick_lock & 3) == 3) { + ar7_wdt->kick = value; + return; + } + } + printk(KERN_ERR DRVNAME ": failed to unlock WDT kick reg\n"); +} + +static void ar7_wdt_prescale(u32 value) +{ + ar7_wdt->prescale_lock = 0x5A5A; + if ((ar7_wdt->prescale_lock & 3) == 1) { + ar7_wdt->prescale_lock = 0xA5A5; + if ((ar7_wdt->prescale_lock & 3) == 3) { + ar7_wdt->prescale = value; + return; + } + } + printk(KERN_ERR DRVNAME ": failed to unlock WDT prescale reg\n"); +} + +static void ar7_wdt_change(u32 value) +{ + ar7_wdt->change_lock = 0x6666; + if ((ar7_wdt->change_lock & 3) == 1) { + ar7_wdt->change_lock = 0xBBBB; + if ((ar7_wdt->change_lock & 3) == 3) { + ar7_wdt->change = value; + return; + } + } + printk(KERN_ERR DRVNAME ": failed to unlock WDT change reg\n"); +} + +static void ar7_wdt_disable(u32 value) +{ + ar7_wdt->disable_lock = 0x7777; + if ((ar7_wdt->disable_lock & 3) == 1) { + ar7_wdt->disable_lock = 0xCCCC; + if ((ar7_wdt->disable_lock & 3) == 2) { + ar7_wdt->disable_lock = 0xDDDD; + if ((ar7_wdt->disable_lock & 3) == 3) { + ar7_wdt->disable = value; + return; + } + } + } + printk(KERN_ERR DRVNAME ": failed to unlock WDT disable reg\n"); +} + +static void ar7_wdt_update_margin(int new_margin) +{ + u32 change; + + change = new_margin * (ar7_vbus_freq() / prescale_value); + if (change < 1) change = 1; + if (change > 0xFFFF) change = 0xFFFF; + ar7_wdt_change(change); + margin = change * prescale_value / ar7_vbus_freq(); + printk(KERN_INFO DRVNAME + ": timer margin %d seconds (prescale %d, change %d, freq %d)\n", + margin, prescale_value, change, ar7_vbus_freq()); +} + +static void ar7_wdt_enable_wdt(void) +{ + printk(KERN_DEBUG DRVNAME ": enabling watchdog timer\n"); + ar7_wdt_disable(1); + ar7_wdt_kick(1); +} + +static void ar7_wdt_disable_wdt(void) +{ + printk(KERN_DEBUG DRVNAME ": disabling watchdog timer\n"); + ar7_wdt_disable(0); +} + +static int ar7_wdt_open(struct inode *inode, struct file *file) +{ + /* only allow one at a time */ + if (down_trylock(&open_semaphore)) + return -EBUSY; + ar7_wdt_enable_wdt(); + expect_close = 0; + + return 0; +} + +static int ar7_wdt_release(struct inode *inode, struct file *file) +{ + if (!expect_close) { + printk(KERN_WARNING DRVNAME ": watchdog device closed unexpectedly, will not disable the watchdog timer\n"); + } else if (!nowayout) { + ar7_wdt_disable_wdt(); + } + up(&open_semaphore); + + return 0; +} + +static int ar7_wdt_notify_sys(struct notifier_block *this, + unsigned long code, void *unused) +{ + if (code == SYS_HALT || code == SYS_POWER_OFF) + if (!nowayout) + ar7_wdt_disable_wdt(); + + return NOTIFY_DONE; +} + +static struct notifier_block ar7_wdt_notifier = +{ + .notifier_call = ar7_wdt_notify_sys +}; + +static ssize_t ar7_wdt_write(struct file *file, const char *data, + size_t len, loff_t *ppos) +{ + if (ppos != &file->f_pos) + return -ESPIPE; + + /* check for a magic close character */ + if (len) { + size_t i; + + ar7_wdt_kick(1); + + expect_close = 0; + for (i = 0; i < len; ++i) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 1; + } + + } + return len; +} + +static int ar7_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + static struct watchdog_info ident = { + .identity = LONGNAME, + .firmware_version = 1, + .options = (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING), + }; + int new_margin; + + switch (cmd) { + default: + return -ENOTTY; + case WDIOC_GETSUPPORT: + if(copy_to_user((struct watchdog_info *)arg, &ident, + sizeof(ident))) + return -EFAULT; + return 0; + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + if (put_user(0, (int *)arg)) + return -EFAULT; + return 0; + case WDIOC_KEEPALIVE: + ar7_wdt_kick(1); + return 0; + case WDIOC_SETTIMEOUT: + if (get_user(new_margin, (int *)arg)) + return -EFAULT; + if (new_margin < 1) + return -EINVAL; + + ar7_wdt_update_margin(new_margin); + ar7_wdt_kick(1); + + case WDIOC_GETTIMEOUT: + if (put_user(margin, (int *)arg)) + return -EFAULT; + return 0; + } +} + +static struct file_operations ar7_wdt_fops = { + .owner = THIS_MODULE, + .write = ar7_wdt_write, + .ioctl = ar7_wdt_ioctl, + .open = ar7_wdt_open, + .release = ar7_wdt_release, +}; + +static struct miscdevice ar7_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &ar7_wdt_fops, +}; + +static int __init ar7_wdt_init(void) +{ + int rc; + + ar7_wdt_get_regs(); + + if (!request_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t), LONGNAME)) { + printk(KERN_WARNING DRVNAME ": watchdog I/O region busy\n"); + return -EBUSY; + } + + ar7_wdt = (ar7_wdt_t *)ioremap(ar7_regs_wdt, sizeof(ar7_wdt_t)); + + ar7_wdt_disable_wdt(); + ar7_wdt_prescale(prescale_value); + ar7_wdt_update_margin(margin); + + sema_init(&open_semaphore, 1); + + rc = misc_register(&ar7_wdt_miscdev); + if (rc) { + printk(KERN_ERR DRVNAME ": unable to register misc device\n"); + goto out_alloc; + } + + rc = register_reboot_notifier(&ar7_wdt_notifier); + if (rc) { + printk(KERN_ERR DRVNAME ": unable to register reboot notifier\n"); + goto out_register; + } + goto out; + +out_register: + misc_deregister(&ar7_wdt_miscdev); +out_alloc: + release_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t)); +out: + return rc; +} + +static void __exit ar7_wdt_cleanup(void) +{ + unregister_reboot_notifier(&ar7_wdt_notifier); + misc_deregister(&ar7_wdt_miscdev); + iounmap(ar7_wdt); + release_mem_region(ar7_regs_wdt, sizeof(ar7_wdt_t)); +} + +module_init(ar7_wdt_init); +module_exit(ar7_wdt_cleanup); diff --git a/target/linux/ar7/files/drivers/leds/leds-ar7.c b/target/linux/ar7/files/drivers/leds/leds-ar7.c new file mode 100644 index 0000000000..85533dee12 --- /dev/null +++ b/target/linux/ar7/files/drivers/leds/leds-ar7.c @@ -0,0 +1,132 @@ +/* + * linux/drivers/leds/leds-ar7.c + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "ar7-leds" +#define LONGNAME "TI AR7 LEDs driver" +#define AR7_GPIO_BIT_STATUS_LED 8 + +MODULE_AUTHOR("Nicolas Thill "); +MODULE_DESCRIPTION(LONGNAME); +MODULE_LICENSE("GPL"); + +static void ar7_status_led_set(struct led_classdev *pled, + enum led_brightness value) +{ + gpio_set_value(AR7_GPIO_BIT_STATUS_LED, value ? 0 : 1); +} + +static struct led_classdev ar7_status_led = { + .name = "ar7:status", + .brightness_set = ar7_status_led_set, +}; + +#ifdef CONFIG_PM +static int ar7_leds_suspend(struct platform_device *dev, + pm_message_t state) +{ + led_classdev_suspend(&ar7_status_led); + return 0; +} + +static int ar7_leds_resume(struct platform_device *dev) +{ + led_classdev_resume(&ar7_status_led); + return 0; +} +#else /* CONFIG_PM */ +#define ar7_leds_suspend NULL +#define ar7_leds_resume NULL +#endif /* CONFIG_PM */ + +static int ar7_leds_probe(struct platform_device *pdev) +{ + int rc; + + rc = led_classdev_register(&pdev->dev, &ar7_status_led); + if (rc < 0 ) + goto out; + + ar7_gpio_enable(AR7_GPIO_BIT_STATUS_LED); + gpio_direction_output(AR7_GPIO_BIT_STATUS_LED); + +out: + return rc; +} + +static int ar7_leds_remove(struct platform_device *pdev) +{ + led_classdev_unregister(&ar7_status_led); + + return 0; +} + +static struct platform_device *ar7_leds_device; + +static struct platform_driver ar7_leds_driver = { + .probe = ar7_leds_probe, + .remove = ar7_leds_remove, + .suspend = ar7_leds_suspend, + .resume = ar7_leds_resume, + .driver = { + .name = DRVNAME, + }, +}; + +static int __init ar7_leds_init(void) +{ + int rc; + + ar7_leds_device = platform_device_alloc(DRVNAME, -1); + if (!ar7_leds_device) + return -ENOMEM; + + rc = platform_device_add(ar7_leds_device); + if (rc < 0) + goto out_put; + + rc = platform_driver_register(&ar7_leds_driver); + if (rc < 0) + goto out_put; + + goto out; + +out_put: + platform_device_put(ar7_leds_device); +out: + return rc; +} + +static void __exit ar7_leds_exit(void) +{ + platform_driver_unregister(&ar7_leds_driver); + platform_device_unregister(ar7_leds_device); +} + +module_init(ar7_leds_init); +module_exit(ar7_leds_exit); diff --git a/target/linux/ar7/files/drivers/mtd/ar7part.c b/target/linux/ar7/files/drivers/mtd/ar7part.c new file mode 100644 index 0000000000..587bb31bb2 --- /dev/null +++ b/target/linux/ar7/files/drivers/mtd/ar7part.c @@ -0,0 +1,140 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * TI AR7 flash partition table. + * Based on ar7 map by Felix Fietkau. + * + */ + +#include +#include + +#include +#include +#include +#include + +struct ar7_bin_rec { + unsigned int checksum; + unsigned int length; + unsigned int address; +}; + +static struct mtd_partition ar7_parts[5]; + +static int create_mtd_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + unsigned long origin) +{ + struct ar7_bin_rec header; + unsigned int offset, len; + unsigned int pre_size = master->erasesize, post_size = 0, + root_offset = 0xe0000; + int retries = 10; + + printk("Parsing AR7 partition map...\n"); + + ar7_parts[0].name = "loader"; + ar7_parts[0].offset = 0; + ar7_parts[0].size = master->erasesize; + ar7_parts[0].mask_flags = MTD_WRITEABLE; + + ar7_parts[1].name = "config"; + ar7_parts[1].offset = 0; + ar7_parts[1].size = master->erasesize; + ar7_parts[1].mask_flags = 0; + + do { + offset = pre_size; + master->read(master, offset, sizeof(header), &len, (u_char *)&header); + if (!strncmp((char *)&header, "TIENV0.8", 8)) + ar7_parts[1].offset = pre_size; + if (header.checksum == 0xfeedfa42) + break; + if (header.checksum == 0xfeed1281) + break; + pre_size += master->erasesize; + } while (retries--); + + pre_size = offset; + + if (!ar7_parts[1].offset) { + ar7_parts[1].offset = master->size - master->erasesize; + post_size = master->erasesize; + } + + switch (header.checksum) { + case 0xfeedfa42: + while (header.length) { + offset += sizeof(header) + header.length; + master->read(master, offset, sizeof(header), + &len, (u_char *)&header); + } + root_offset = offset + sizeof(header) + 4; + break; + case 0xfeed1281: + while (header.length) { + offset += sizeof(header) + header.length; + master->read(master, offset, sizeof(header), + &len, (u_char *)&header); + } + root_offset = offset + sizeof(header) + 4 + 0xff; + root_offset &= ~(u32)0xff; + break; + default: + printk("Unknown magic: %08x\n", header.checksum); + break; + } + + master->read(master, root_offset, sizeof(header), &len, (u_char *)&header); + if (header.checksum != SQUASHFS_MAGIC) { + root_offset += master->erasesize - 1; + root_offset &= ~(master->erasesize - 1); + } + + ar7_parts[2].name = "linux"; + ar7_parts[2].offset = pre_size; + ar7_parts[2].size = master->size - pre_size - post_size; + ar7_parts[2].mask_flags = 0; + + ar7_parts[3].name = "rootfs"; + ar7_parts[3].offset = root_offset; + ar7_parts[3].size = master->size - root_offset - post_size; + ar7_parts[3].mask_flags = 0; + + *pparts = ar7_parts; + return 4; +} + +static struct mtd_part_parser ar7_parser = { + .owner = THIS_MODULE, + .parse_fn = create_mtd_partitions, + .name = "ar7part", +}; + +static int __init ar7_parser_init(void) +{ + return register_mtd_parser(&ar7_parser); +} + +module_init(ar7_parser_init); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Felix Fietkau, Eugene Konev"); +MODULE_DESCRIPTION("MTD partitioning for TI AR7"); diff --git a/target/linux/ar7/files/drivers/net/cpmac.c b/target/linux/ar7/files/drivers/net/cpmac.c new file mode 100644 index 0000000000..7d46677080 --- /dev/null +++ b/target/linux/ar7/files/drivers/net/cpmac.c @@ -0,0 +1,1222 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include +#include + +#include +#include /* printk() */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +MODULE_AUTHOR("Eugene Konev"); +MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)"); +MODULE_LICENSE("GPL"); + +static int rx_ring_size = 64; +static int disable_napi = 0; +module_param(rx_ring_size, int, 64); +module_param(disable_napi, int, 0); +MODULE_PARM_DESC(rx_ring_size, "Size of rx ring (in skbs)"); +MODULE_PARM_DESC(disable_napi, "Disable NAPI polling"); + +/* Register definitions */ +struct cpmac_control_regs { + volatile u32 revision; + volatile u32 control; + volatile u32 teardown; + volatile u32 unused; +} __attribute__ ((packed)); + +struct cpmac_int_regs { + volatile u32 stat_raw; + volatile u32 stat_masked; + volatile u32 enable; + volatile u32 clear; +} __attribute__ ((packed)); + +struct cpmac_stats { + volatile u32 good; + volatile u32 bcast; + volatile u32 mcast; + volatile u32 pause; + volatile u32 crc_error; + volatile u32 align_error; + volatile u32 oversized; + volatile u32 jabber; + volatile u32 undersized; + volatile u32 fragment; + volatile u32 filtered; + volatile u32 qos_filtered; + volatile u32 octets; +} __attribute__ ((packed)); + +struct cpmac_regs { + struct cpmac_control_regs tx_ctrl; + struct cpmac_control_regs rx_ctrl; + volatile u32 unused1[56]; + volatile u32 mbp; +/* MBP bits */ +#define MBP_RXPASSCRC 0x40000000 +#define MBP_RXQOS 0x20000000 +#define MBP_RXNOCHAIN 0x10000000 +#define MBP_RXCMF 0x01000000 +#define MBP_RXSHORT 0x00800000 +#define MBP_RXCEF 0x00400000 +#define MBP_RXPROMISC 0x00200000 +#define MBP_PROMISCCHAN(chan) (((chan) & 0x7) << 16) +#define MBP_RXBCAST 0x00002000 +#define MBP_BCASTCHAN(chan) (((chan) & 0x7) << 8) +#define MBP_RXMCAST 0x00000020 +#define MBP_MCASTCHAN(chan) ((chan) & 0x7) + volatile u32 unicast_enable; + volatile u32 unicast_clear; + volatile u32 max_len; + volatile u32 buffer_offset; + volatile u32 filter_flow_threshold; + volatile u32 unused2[2]; + volatile u32 flow_thre[8]; + volatile u32 free_buffer[8]; + volatile u32 mac_control; +#define MAC_TXPTYPE 0x00000200 +#define MAC_TXPACE 0x00000040 +#define MAC_MII 0x00000020 +#define MAC_TXFLOW 0x00000010 +#define MAC_RXFLOW 0x00000008 +#define MAC_MTEST 0x00000004 +#define MAC_LOOPBACK 0x00000002 +#define MAC_FDX 0x00000001 + volatile u32 mac_status; +#define MACST_QOS 0x4 +#define MACST_RXFLOW 0x2 +#define MACST_TXFLOW 0x1 + volatile u32 emc_control; + volatile u32 unused3; + struct cpmac_int_regs tx_int; + volatile u32 mac_int_vector; +/* Int Status bits */ +#define INTST_STATUS 0x80000 +#define INTST_HOST 0x40000 +#define INTST_RX 0x20000 +#define INTST_TX 0x10000 + volatile u32 mac_eoi_vector; + volatile u32 unused4[2]; + struct cpmac_int_regs rx_int; + volatile u32 mac_int_stat_raw; + volatile u32 mac_int_stat_masked; + volatile u32 mac_int_enable; + volatile u32 mac_int_clear; + volatile u32 mac_addr_low[8]; + volatile u32 mac_addr_mid; + volatile u32 mac_addr_high; + volatile u32 mac_hash_low; + volatile u32 mac_hash_high; + volatile u32 boff_test; + volatile u32 pac_test; + volatile u32 rx_pause; + volatile u32 tx_pause; + volatile u32 unused5[2]; + struct cpmac_stats rx_stats; + struct cpmac_stats tx_stats; + volatile u32 unused6[232]; + volatile u32 tx_ptr[8]; + volatile u32 rx_ptr[8]; + volatile u32 tx_ack[8]; + volatile u32 rx_ack[8]; + +} __attribute__ ((packed)); + +struct cpmac_mdio_regs { + volatile u32 version; + volatile u32 control; +#define MDIOC_IDLE 0x80000000 +#define MDIOC_ENABLE 0x40000000 +#define MDIOC_PREAMBLE 0x00100000 +#define MDIOC_FAULT 0x00080000 +#define MDIOC_FAULTDETECT 0x00040000 +#define MDIOC_INTTEST 0x00020000 +#define MDIOC_CLKDIV(div) ((div) & 0xff) + volatile u32 alive; + volatile u32 link; + struct cpmac_int_regs link_int; + struct cpmac_int_regs user_int; + u32 unused[20]; + volatile u32 access; +#define MDIO_BUSY 0x80000000 +#define MDIO_WRITE 0x40000000 +#define MDIO_REG(reg) (((reg) & 0x1f) << 21) +#define MDIO_PHY(phy) (((phy) & 0x1f) << 16) +#define MDIO_DATA(data) ((data) & 0xffff) + volatile u32 physel; +} __attribute__ ((packed)); + +/* Descriptor */ +struct cpmac_desc { + u32 hw_next; + u32 hw_data; + u16 buflen; + u16 bufflags; + u16 datalen; + u16 dataflags; +/* Flags bits */ +#define CPMAC_SOP 0x8000 +#define CPMAC_EOP 0x4000 +#define CPMAC_OWN 0x2000 +#define CPMAC_EOQ 0x1000 + struct sk_buff *skb; + struct cpmac_desc *next; +} __attribute__ ((packed)); + +struct cpmac_priv { + struct net_device_stats stats; + spinlock_t lock; + struct sk_buff *skb_pool; + int free_skbs; + struct cpmac_desc *rx_head; + int tx_head, tx_tail; + struct cpmac_desc *desc_ring; + struct cpmac_regs *regs; + struct mii_bus *mii_bus; + struct phy_device *phy; + char phy_name[BUS_ID_SIZE]; + struct plat_cpmac_data *config; + int oldlink, oldspeed, oldduplex; + u32 msg_enable; + struct net_device *dev; + struct work_struct alloc_work; +}; + +static irqreturn_t cpmac_irq(int, void *); +static void cpmac_reset(struct net_device *dev); +static void cpmac_hw_init(struct net_device *dev); +static int cpmac_stop(struct net_device *dev); +static int cpmac_open(struct net_device *dev); + +#undef CPMAC_DEBUG +#define CPMAC_LOW_THRESH 32 +#define CPMAC_ALLOC_SIZE 64 +#define CPMAC_SKB_SIZE 1518 +#define CPMAC_TX_RING_SIZE 8 + +#ifdef CPMAC_DEBUG +static void cpmac_dump_regs(u32 *base, int count) +{ + int i; + for (i = 0; i < (count + 3) / 4; i++) { + if (i % 4 == 0) printk("\nCPMAC[0x%04x]:", i * 4); + printk(" 0x%08x", *(base + i)); + } + printk("\n"); +} + +static const char *cpmac_dump_buf(const uint8_t * buf, unsigned size) +{ + static char buffer[3 * 25 + 1]; + char *p = &buffer[0]; + if (size > 20) + size = 20; + while (size-- > 0) { + p += sprintf(p, " %02x", *buf++); + } + return buffer; +} +#endif + +static int cpmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum) +{ + struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv; + volatile u32 val; + + while ((val = regs->access) & MDIO_BUSY); + regs->access = MDIO_BUSY | MDIO_REG(regnum & 0x1f) | + MDIO_PHY(phy_id & 0x1f); + while ((val = regs->access) & MDIO_BUSY); + + return val & 0xffff; +} + +static int cpmac_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 val) +{ + struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv; + volatile u32 tmp; + + while ((tmp = regs->access) & MDIO_BUSY); + regs->access = MDIO_BUSY | MDIO_WRITE | + MDIO_REG(regnum & 0x1f) | MDIO_PHY(phy_id & 0x1f) | + val; + + return 0; +} + +static int cpmac_mdio_reset(struct mii_bus *bus) +{ + struct cpmac_mdio_regs *regs = (struct cpmac_mdio_regs *)bus->priv; + + ar7_device_reset(AR7_RESET_BIT_MDIO); + regs->control = MDIOC_ENABLE | + MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1); + + return 0; +} + +static int mii_irqs[PHY_MAX_ADDR] = { PHY_POLL, }; + +static struct mii_bus cpmac_mii = { + .name = "cpmac-mii", + .read = cpmac_mdio_read, + .write = cpmac_mdio_write, + .reset = cpmac_mdio_reset, + .irq = mii_irqs, +}; + +static int cpmac_config(struct net_device *dev, struct ifmap *map) +{ + if (dev->flags & IFF_UP) + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != dev->base_addr) + return -EOPNOTSUPP; + + /* ignore other fields */ + return 0; +} + +static int cpmac_set_mac_address(struct net_device *dev, void *addr) +{ + struct sockaddr *sa = addr; + + if (dev->flags & IFF_UP) + return -EBUSY; + + memcpy(dev->dev_addr, sa->sa_data, dev->addr_len); + + return 0; +} + +static void cpmac_set_multicast_list(struct net_device *dev) +{ + struct dev_mc_list *iter; + int i; + int hash, tmp; + int hashlo = 0, hashhi = 0; + struct cpmac_priv *priv = netdev_priv(dev); + + if(dev->flags & IFF_PROMISC) { + priv->regs->mbp &= ~MBP_PROMISCCHAN(0); /* promisc channel 0 */ + priv->regs->mbp |= MBP_RXPROMISC; + } else { + priv->regs->mbp &= ~MBP_RXPROMISC; + if(dev->flags & IFF_ALLMULTI) { + /* enable all multicast mode */ + priv->regs->mac_hash_low = 0xffffffff; + priv->regs->mac_hash_high = 0xffffffff; + } else { + for(i = 0, iter = dev->mc_list; i < dev->mc_count; + i++, iter = iter->next) { + hash = 0; + tmp = iter->dmi_addr[0]; + hash ^= (tmp >> 2) ^ (tmp << 4); + tmp = iter->dmi_addr[1]; + hash ^= (tmp >> 4) ^ (tmp << 2); + tmp = iter->dmi_addr[2]; + hash ^= (tmp >> 6) ^ tmp; + tmp = iter->dmi_addr[4]; + hash ^= (tmp >> 2) ^ (tmp << 4); + tmp = iter->dmi_addr[5]; + hash ^= (tmp >> 4) ^ (tmp << 2); + tmp = iter->dmi_addr[6]; + hash ^= (tmp >> 6) ^ tmp; + hash &= 0x3f; + if(hash < 32) { + hashlo |= 1<regs->mac_hash_low = hashlo; + priv->regs->mac_hash_high = hashhi; + } + } +} + +static struct sk_buff *cpmac_get_skb(struct net_device *dev) +{ + struct sk_buff *skb; + struct cpmac_priv *priv = netdev_priv(dev); + + skb = priv->skb_pool; + if (likely(skb)) { + priv->skb_pool = skb->next; + } else { + skb = dev_alloc_skb(CPMAC_SKB_SIZE + 2); + if (skb) { + skb->next = NULL; + skb_reserve(skb, 2); + skb->dev = priv->dev; + } + } + + if (likely(priv->free_skbs)) + priv->free_skbs--; + + if (priv->free_skbs < CPMAC_LOW_THRESH) + schedule_work(&priv->alloc_work); + + return skb; +} + +static inline struct sk_buff *cpmac_rx_one(struct net_device *dev, + struct cpmac_priv *priv, + struct cpmac_desc *desc) +{ + unsigned long flags; + char *data; + struct sk_buff *skb, *result = NULL; + + priv->regs->rx_ack[0] = virt_to_phys(desc); + if (unlikely(!desc->datalen)) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: rx: spurious interrupt\n", + dev->name); + priv->stats.rx_errors++; + return NULL; + } + + spin_lock_irqsave(&priv->lock, flags); + skb = cpmac_get_skb(dev); + if (likely(skb)) { + data = (char *)phys_to_virt(desc->hw_data); + dma_cache_inv((u32)data, desc->datalen); + skb_put(desc->skb, desc->datalen); + desc->skb->protocol = eth_type_trans(desc->skb, dev); + desc->skb->ip_summed = CHECKSUM_NONE; + priv->stats.rx_packets++; + priv->stats.rx_bytes += desc->datalen; + result = desc->skb; + desc->skb = skb; + } else { +#ifdef CPMAC_DEBUG + if (printk_ratelimit()) + printk("%s: low on skbs, dropping packet\n", + dev->name); +#endif + priv->stats.rx_dropped++; + } + spin_unlock_irqrestore(&priv->lock, flags); + + desc->hw_data = virt_to_phys(desc->skb->data); + desc->buflen = CPMAC_SKB_SIZE; + desc->dataflags = CPMAC_OWN; + dma_cache_wback((u32)desc, 16); + + return result; +} + +static void cpmac_rx(struct net_device *dev) +{ + struct sk_buff *skb; + struct cpmac_desc *desc; + struct cpmac_priv *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + if (unlikely(!priv->rx_head)) { + spin_unlock(&priv->lock); + return; + } + + desc = priv->rx_head; + dma_cache_inv((u32)desc, 16); +#ifdef CPMAC_DEBUG + printk(KERN_DEBUG "%s: len=%d, %s\n", __func__, pkt->datalen, + cpmac_dump_buf(data, pkt->datalen)); +#endif + + while ((desc->dataflags & CPMAC_OWN) == 0) { + skb = cpmac_rx_one(dev, priv, desc); + if (likely(skb)) { + netif_rx(skb); + } + desc = desc->next; + dma_cache_inv((u32)desc, 16); + } + + priv->rx_head = desc; + priv->regs->rx_ptr[0] = virt_to_phys(desc); + spin_unlock(&priv->lock); +} + +static int cpmac_poll(struct net_device *dev, int *budget) +{ + struct sk_buff *skb; + struct cpmac_desc *desc; + int received = 0, quota = min(dev->quota, *budget); + struct cpmac_priv *priv = netdev_priv(dev); + + if (unlikely(!priv->rx_head)) { + if (printk_ratelimit()) + printk(KERN_WARNING "%s: rx: polling, but no queue\n", + dev->name); + netif_rx_complete(dev); + return 0; + } + + desc = priv->rx_head; + dma_cache_inv((u32)desc, 16); + + while ((received < quota) && ((desc->dataflags & CPMAC_OWN) == 0)) { + skb = cpmac_rx_one(dev, priv, desc); + if (likely(skb)) { + netif_receive_skb(skb); + received++; + } + desc = desc->next; + priv->rx_head = desc; + dma_cache_inv((u32)desc, 16); + } + + *budget -= received; + dev->quota -= received; +#ifdef CPMAC_DEBUG + printk("%s: processed %d packets\n", dev->name, received); +#endif + if (desc->dataflags & CPMAC_OWN) { + priv->regs->rx_ptr[0] = virt_to_phys(desc); + netif_rx_complete(dev); + priv->regs->rx_int.enable = 0x1; + priv->regs->rx_int.clear = 0xfe; + return 0; + } + + return 1; +} + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) +static void +cpmac_alloc_skbs(struct work_struct *work) +{ + struct cpmac_priv *priv = container_of(work, struct cpmac_priv, + alloc_work); +#else +static void +cpmac_alloc_skbs(void *data) +{ + struct net_device *dev = (struct net_device*)data; + struct cpmac_priv *priv = netdev_priv(dev); +#endif + unsigned long flags; + int i, num_skbs = 0; + struct sk_buff *skb, *skbs = NULL; + + for (i = 0; i < CPMAC_ALLOC_SIZE; i++) { + skb = alloc_skb(CPMAC_SKB_SIZE + 2, GFP_KERNEL); + if (!skb) + break; + skb->next = skbs; + skb_reserve(skb, 2); + skb->dev = priv->dev; + num_skbs++; + skbs = skb; + } + + if (skbs) { + spin_lock_irqsave(&priv->lock, flags); + for (skb = priv->skb_pool; skb && skb->next; skb = skb->next); + if (!skb) { + priv->skb_pool = skbs; + } else { + skb->next = skbs; + } + priv->free_skbs += num_skbs; + spin_unlock_irqrestore(&priv->lock, flags); +#ifdef CPMAC_DEBUG + printk("%s: allocated %d skbs\n", priv->dev->name, num_skbs); +#endif + } +} + +static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned long flags; + int len, chan; + struct cpmac_desc *desc; + struct cpmac_priv *priv = netdev_priv(dev); + + len = skb->len; +#ifdef CPMAC_DEBUG + printk(KERN_DEBUG "%s: len=%d\n", __func__, len); //cpmac_dump_buf(const uint8_t * buf, unsigned size) +#endif + if (unlikely(len < ETH_ZLEN)) { + if (unlikely(skb_padto(skb, ETH_ZLEN))) { + if (printk_ratelimit()) + printk(KERN_NOTICE "%s: padding failed, dropping\n", + dev->name); + spin_lock_irqsave(&priv->lock, flags); + priv->stats.tx_dropped++; + spin_unlock_irqrestore(&priv->lock, flags); + return -ENOMEM; + } + len = ETH_ZLEN; + } + spin_lock_irqsave(&priv->lock, flags); + chan = priv->tx_tail++; + priv->tx_tail %= 8; + if (priv->tx_tail == priv->tx_head) + netif_stop_queue(dev); + + desc = &priv->desc_ring[chan]; + dma_cache_inv((u32)desc, 16); + if (desc->dataflags & CPMAC_OWN) { + printk(KERN_NOTICE "%s: tx dma ring full, dropping\n", dev->name); + priv->stats.tx_dropped++; + spin_unlock_irqrestore(&priv->lock, flags); + return -ENOMEM; + } + + dev->trans_start = jiffies; + desc->dataflags = CPMAC_SOP | CPMAC_EOP | CPMAC_OWN; + desc->skb = skb; + desc->hw_data = virt_to_phys(skb->data); + dma_cache_wback((u32)skb->data, len); + desc->buflen = len; + desc->datalen = len; + desc->hw_next = 0; + dma_cache_wback((u32)desc, 16); + priv->regs->tx_ptr[chan] = virt_to_phys(desc); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static void cpmac_end_xmit(struct net_device *dev, int channel) +{ + struct cpmac_desc *desc; + struct cpmac_priv *priv = netdev_priv(dev); + + spin_lock(&priv->lock); + desc = &priv->desc_ring[channel]; + priv->regs->tx_ack[channel] = virt_to_phys(desc); + if (likely(desc->skb)) { + priv->stats.tx_packets++; + priv->stats.tx_bytes += desc->skb->len; + dev_kfree_skb_irq(desc->skb); + if (netif_queue_stopped(dev)) + netif_wake_queue(dev); + } else { + if (printk_ratelimit()) + printk(KERN_NOTICE "%s: end_xmit: spurious interrupt\n", + dev->name); + } + spin_unlock(&priv->lock); +} + +static void cpmac_reset(struct net_device *dev) +{ + int i; + struct cpmac_priv *priv = netdev_priv(dev); + + ar7_device_reset(priv->config->reset_bit); + priv->regs->rx_ctrl.control &= ~1; + priv->regs->tx_ctrl.control &= ~1; + for (i = 0; i < 8; i++) { + priv->regs->tx_ptr[i] = 0; + priv->regs->rx_ptr[i] = 0; + } + priv->regs->mac_control &= ~MAC_MII; /* disable mii */ +} + +static inline void cpmac_free_rx_ring(struct net_device *dev) +{ + struct cpmac_desc *desc; + int i; + struct cpmac_priv *priv = netdev_priv(dev); + + if (unlikely(!priv->rx_head)) + return; + + desc = priv->rx_head; + dma_cache_inv((u32)desc, 16); + + for (i = 0; i < rx_ring_size; i++) { + desc->buflen = CPMAC_SKB_SIZE; + if ((desc->dataflags & CPMAC_OWN) == 0) { + desc->dataflags = CPMAC_OWN; + priv->stats.rx_dropped++; + } + dma_cache_wback((u32)desc, 16); + desc = desc->next; + dma_cache_inv((u32)desc, 16); + } +} + +static irqreturn_t cpmac_irq(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct cpmac_priv *priv = netdev_priv(dev); + u32 status; + + if (!dev) + return IRQ_NONE; + + status = priv->regs->mac_int_vector; + + if (status & INTST_TX) { + cpmac_end_xmit(dev, (status & 7)); + } + + if (status & INTST_RX) { + if (disable_napi) { + cpmac_rx(dev); + } else { + priv->regs->rx_int.enable = 0; + priv->regs->rx_int.clear = 0xff; + netif_rx_schedule(dev); + } + } + + priv->regs->mac_eoi_vector = 0; + + if (unlikely(status & (INTST_HOST | INTST_STATUS))) { + if (printk_ratelimit()) { + printk(KERN_ERR "%s: hw error, resetting...\n", dev->name); + } + spin_lock(&priv->lock); + phy_stop(priv->phy); + cpmac_reset(dev); + cpmac_free_rx_ring(dev); + cpmac_hw_init(dev); + spin_unlock(&priv->lock); + } + + return IRQ_HANDLED; +} + +static void cpmac_tx_timeout(struct net_device *dev) +{ + struct cpmac_priv *priv = netdev_priv(dev); + struct cpmac_desc *desc; + + priv->stats.tx_errors++; + desc = &priv->desc_ring[priv->tx_head++]; + priv->tx_head %= 8; + printk("%s: transmit timeout\n", dev->name); + if (desc->skb) + dev_kfree_skb(desc->skb); + netif_wake_queue(dev); +} + +static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct cpmac_priv *priv = netdev_priv(dev); + if (!(netif_running(dev))) + return -EINVAL; + if (!priv->phy) + return -EINVAL; + if ((cmd == SIOCGMIIPHY) || (cmd == SIOCGMIIREG) || + (cmd == SIOCSMIIREG)) + return phy_mii_ioctl(priv->phy, if_mii(ifr), cmd); + + return -EINVAL; +} + +static int cpmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct cpmac_priv *priv = netdev_priv(dev); + + if (priv->phy) + return phy_ethtool_gset(priv->phy, cmd); + + return -EINVAL; +} + +static int cpmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct cpmac_priv *priv = netdev_priv(dev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (priv->phy) + return phy_ethtool_sset(priv->phy, cmd); + + return -EINVAL; +} + +static void cpmac_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, "cpmac"); + strcpy(info->version, "0.0.3"); + info->fw_version[0] = '\0'; + sprintf(info->bus_info, "%s", "cpmac"); + info->regdump_len = 0; +} + +static const struct ethtool_ops cpmac_ethtool_ops = { + .get_settings = cpmac_get_settings, + .set_settings = cpmac_set_settings, + .get_drvinfo = cpmac_get_drvinfo, + .get_link = ethtool_op_get_link, +}; + +static struct net_device_stats *cpmac_stats(struct net_device *dev) +{ + struct cpmac_priv *priv = netdev_priv(dev); + + if (netif_device_present(dev)) + return &priv->stats; + + return NULL; +} + +static int cpmac_change_mtu(struct net_device *dev, int mtu) +{ + unsigned long flags; + struct cpmac_priv *priv = netdev_priv(dev); + spinlock_t *lock = &priv->lock; + + if ((mtu < 68) || (mtu > 1500)) + return -EINVAL; + + spin_lock_irqsave(lock, flags); + dev->mtu = mtu; + spin_unlock_irqrestore(lock, flags); + + return 0; +} + +static void cpmac_adjust_link(struct net_device *dev) +{ + struct cpmac_priv *priv = netdev_priv(dev); + unsigned long flags; + int new_state = 0; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->phy->link) { + if (priv->phy->duplex != priv->oldduplex) { + new_state = 1; + priv->oldduplex = priv->phy->duplex; + } + + if (priv->phy->speed != priv->oldspeed) { + new_state = 1; + priv->oldspeed = priv->phy->speed; + } + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + netif_schedule(dev); + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->oldspeed = 0; + priv->oldduplex = -1; + } + + if (new_state) + phy_print_status(priv->phy); + + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void cpmac_hw_init(struct net_device *dev) +{ + int i; + struct cpmac_priv *priv = netdev_priv(dev); + + for (i = 0; i < 8; i++) + priv->regs->tx_ptr[i] = 0; + priv->regs->rx_ptr[0] = virt_to_phys(priv->rx_head); + + priv->regs->mbp = MBP_RXSHORT | MBP_RXBCAST | MBP_RXMCAST; + priv->regs->unicast_enable = 0x1; + priv->regs->unicast_clear = 0xfe; + priv->regs->buffer_offset = 0; + for (i = 0; i < 8; i++) + priv->regs->mac_addr_low[i] = dev->dev_addr[5]; + priv->regs->mac_addr_mid = dev->dev_addr[4]; + priv->regs->mac_addr_high = dev->dev_addr[0] | (dev->dev_addr[1] << 8) + | (dev->dev_addr[2] << 16) | (dev->dev_addr[3] << 24); + priv->regs->max_len = CPMAC_SKB_SIZE; + priv->regs->rx_int.enable = 0x1; + priv->regs->rx_int.clear = 0xfe; + priv->regs->tx_int.enable = 0xff; + priv->regs->tx_int.clear = 0; + priv->regs->mac_int_enable = 3; + priv->regs->mac_int_clear = 0xfc; + + priv->regs->rx_ctrl.control |= 1; + priv->regs->tx_ctrl.control |= 1; + priv->regs->mac_control |= MAC_MII | MAC_FDX; + + priv->phy->state = PHY_CHANGELINK; + phy_start(priv->phy); +} + +static int cpmac_open(struct net_device *dev) +{ + int i, size, res; + struct cpmac_priv *priv = netdev_priv(dev); + struct cpmac_desc *desc; + struct sk_buff *skb; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) + priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, + 0, PHY_INTERFACE_MODE_MII); +#else + priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0); +#endif + if (IS_ERR(priv->phy)) { + printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); + return PTR_ERR(priv->phy); + } + + if (!request_mem_region(dev->mem_start, dev->mem_end - + dev->mem_start, dev->name)) { + printk("%s: failed to request registers\n", + dev->name); + res = -ENXIO; + goto fail_reserve; + } + + priv->regs = ioremap_nocache(dev->mem_start, dev->mem_end - + dev->mem_start); + if (!priv->regs) { + printk("%s: failed to remap registers\n", dev->name); + res = -ENXIO; + goto fail_remap; + } + + priv->rx_head = NULL; + size = sizeof(struct cpmac_desc) * (rx_ring_size + + CPMAC_TX_RING_SIZE); + priv->desc_ring = (struct cpmac_desc *)kmalloc(size, GFP_KERNEL); + if (!priv->desc_ring) { + res = -ENOMEM; + goto fail_alloc; + } + + memset((char *)priv->desc_ring, 0, size); + + priv->skb_pool = NULL; + priv->free_skbs = 0; + priv->rx_head = &priv->desc_ring[CPMAC_TX_RING_SIZE]; + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 20) + INIT_WORK(&priv->alloc_work, cpmac_alloc_skbs); +#else + INIT_WORK(&priv->alloc_work, cpmac_alloc_skbs, dev); +#endif + schedule_work(&priv->alloc_work); + flush_scheduled_work(); + + for (i = 0; i < rx_ring_size; i++) { + desc = &priv->rx_head[i]; + skb = cpmac_get_skb(dev); + if (!skb) { + res = -ENOMEM; + goto fail_desc; + } + desc->skb = skb; + desc->hw_data = virt_to_phys(skb->data); + desc->buflen = CPMAC_SKB_SIZE; + desc->dataflags = CPMAC_OWN; + desc->next = &priv->rx_head[(i + 1) % rx_ring_size]; + desc->hw_next = virt_to_phys(desc->next); + dma_cache_wback((u32)desc, 16); + } + + if((res = request_irq(dev->irq, cpmac_irq, SA_INTERRUPT, + dev->name, dev))) { + printk("%s: failed to obtain irq\n", dev->name); + goto fail_irq; + } + + cpmac_reset(dev); + cpmac_hw_init(dev); + + netif_start_queue(dev); + return 0; + +fail_irq: +fail_desc: + for (i = 0; i < rx_ring_size; i++) + if (priv->rx_head[i].skb) + kfree_skb(priv->rx_head[i].skb); +fail_alloc: + kfree(priv->desc_ring); + + for (skb = priv->skb_pool; skb; skb = priv->skb_pool) { + priv->skb_pool = skb->next; + kfree_skb(skb); + } + + iounmap(priv->regs); + +fail_remap: + release_mem_region(dev->mem_start, dev->mem_end - + dev->mem_start); + +fail_reserve: + phy_disconnect(priv->phy); + + return res; +} + +static int cpmac_stop(struct net_device *dev) +{ + int i; + struct sk_buff *skb; + struct cpmac_priv *priv = netdev_priv(dev); + + netif_stop_queue(dev); + + phy_stop(priv->phy); + phy_disconnect(priv->phy); + priv->phy = NULL; + + cpmac_reset(dev); + + for (i = 0; i < 8; i++) { + priv->regs->rx_ptr[i] = 0; + priv->regs->tx_ptr[i] = 0; + priv->regs->mbp = 0; + } + + free_irq(dev->irq, dev); + release_mem_region(dev->mem_start, dev->mem_end - + dev->mem_start); + + cancel_delayed_work(&priv->alloc_work); + flush_scheduled_work(); + + priv->rx_head = &priv->desc_ring[CPMAC_TX_RING_SIZE]; + for (i = 0; i < rx_ring_size; i++) + if (priv->rx_head[i].skb) + kfree_skb(priv->rx_head[i].skb); + + kfree(priv->desc_ring); + + for (skb = priv->skb_pool; skb; skb = priv->skb_pool) { + priv->skb_pool = skb->next; + kfree_skb(skb); + } + + return 0; +} + +static int external_switch = 0; + +static int __devinit cpmac_probe(struct platform_device *pdev) +{ + int i, rc, phy_id; + struct resource *res; + struct cpmac_priv *priv; + struct net_device *dev; + struct plat_cpmac_data *pdata; + + if (strcmp(pdev->name, "cpmac") != 0) + return -ENODEV; + + pdata = pdev->dev.platform_data; + + for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) { + if (!(pdata->phy_mask & (1 << phy_id))) + continue; + if (!cpmac_mii.phy_map[phy_id]) + continue; + break; + } + + if (phy_id == PHY_MAX_ADDR) { + if (external_switch) { + phy_id = 0; + } else { + printk("cpmac: no PHY present\n"); + return -ENODEV; + } + } + + dev = alloc_etherdev(sizeof(struct cpmac_priv)); + + if (!dev) { + printk(KERN_ERR "cpmac: Unable to allocate net_device structure!\n"); + return -ENOMEM; + } + + SET_MODULE_OWNER(dev); + platform_set_drvdata(pdev, dev); + priv = netdev_priv(dev); + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs"); + if (!res) { + rc = -ENODEV; + goto fail; + } + + dev->mem_start = res->start; + dev->mem_end = res->end; + dev->irq = platform_get_irq_byname(pdev, "irq"); + + dev->mtu = 1500; + dev->open = cpmac_open; + dev->stop = cpmac_stop; + dev->set_config = cpmac_config; + dev->hard_start_xmit = cpmac_start_xmit; + dev->do_ioctl = cpmac_ioctl; + dev->get_stats = cpmac_stats; + dev->change_mtu = cpmac_change_mtu; + dev->set_mac_address = cpmac_set_mac_address; + dev->set_multicast_list = cpmac_set_multicast_list; + dev->tx_timeout = cpmac_tx_timeout; + dev->ethtool_ops = &cpmac_ethtool_ops; + if (!disable_napi) { + dev->poll = cpmac_poll; + dev->weight = min(rx_ring_size, 64); + } + + memset(priv, 0, sizeof(struct cpmac_priv)); + spin_lock_init(&priv->lock); + priv->msg_enable = netif_msg_init(NETIF_MSG_WOL, 0x3fff); + priv->config = pdata; + priv->dev = dev; + memcpy(dev->dev_addr, priv->config->dev_addr, sizeof(dev->dev_addr)); + if (phy_id == 31) { + snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, + cpmac_mii.id, phy_id); + } else { + snprintf(priv->phy_name, BUS_ID_SIZE, "fixed@%d:%d", 100, 1); + } + + if ((rc = register_netdev(dev))) { + printk("cpmac: error %i registering device %s\n", + rc, dev->name); + goto fail; + } + + printk("cpmac: device %s (regs: %p, irq: %d, phy: %s, mac: ", + dev->name, (u32 *)dev->mem_start, dev->irq, + priv->phy_name); + for (i = 0; i < 6; i++) { + printk("%02x", dev->dev_addr[i]); + if (i < 5) printk(":"); + else printk(")\n"); + } + + return 0; + +fail: + free_netdev(dev); + return rc; +} + +static int __devexit cpmac_remove(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + unregister_netdev(dev); + free_netdev(dev); + return 0; +} + +static struct platform_driver cpmac_driver = { + .driver.name = "cpmac", + .probe = cpmac_probe, + .remove = cpmac_remove, +}; + +int __devinit cpmac_init(void) +{ + volatile u32 mask; + int i, res; + cpmac_mii.priv = (struct cpmac_mdio_regs *) + ioremap_nocache(AR7_REGS_MDIO, sizeof(struct cpmac_mdio_regs)); + + if (!cpmac_mii.priv) { + printk("Can't ioremap mdio registers\n"); + return -ENXIO; + } + +#warning FIXME: unhardcode gpio&reset bits + ar7_gpio_disable(26); + ar7_gpio_disable(27); + ar7_device_reset(AR7_RESET_BIT_CPMAC_LO); + ar7_device_reset(AR7_RESET_BIT_CPMAC_HI); + ar7_device_reset(AR7_RESET_BIT_EPHY); + + cpmac_mii.reset(&cpmac_mii); + + for (i = 0; i < 300000; i++) { + mask = ((struct cpmac_mdio_regs *)cpmac_mii.priv)->alive; + if (mask) + break; + } + + mask &= 0x7fffffff; + if (mask & (mask - 1)) { + external_switch = 1; + mask = 0; + } + + cpmac_mii.phy_mask = ~(mask | 0x80000000); + + res = mdiobus_register(&cpmac_mii); + if (res) + goto fail_mii; + + res = platform_driver_register(&cpmac_driver); + if (res) + goto fail_cpmac; + + return 0; + +fail_cpmac: + mdiobus_unregister(&cpmac_mii); + +fail_mii: + iounmap(cpmac_mii.priv); + + return res; +} + +void __devexit cpmac_exit(void) +{ + platform_driver_unregister(&cpmac_driver); + mdiobus_unregister(&cpmac_mii); +} + +module_init(cpmac_init); +module_exit(cpmac_exit); diff --git a/target/linux/ar7/files/include/asm-mips/ar7/ar7.h b/target/linux/ar7/files/include/asm-mips/ar7/ar7.h new file mode 100644 index 0000000000..ae1d4192bf --- /dev/null +++ b/target/linux/ar7/files/include/asm-mips/ar7/ar7.h @@ -0,0 +1,167 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_H__ +#define __AR7_H__ + +#include +#include +#include + +#define AR7_REGS_BASE 0x08610000 + +#define AR7_REGS_MAC0 (AR7_REGS_BASE + 0x0000) +#define AR7_REGS_GPIO (AR7_REGS_BASE + 0x0900) +#define AR7_REGS_POWER (AR7_REGS_BASE + 0x0a00) // 0x08610A00 - 0x08610BFF (512 bytes, 128 bytes / clock) +#define AR7_REGS_UART0 (AR7_REGS_BASE + 0x0e00) +#define AR7_REGS_RESET (AR7_REGS_BASE + 0x1600) +#define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800) +#define AR7_REGS_DCL (AR7_REGS_BASE + 0x1A00) +#define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1C00) +#define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1E00) +#define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400) +#define AR7_REGS_MAC1 (AR7_REGS_BASE + 0x2800) + +#define AR7_REGS_WDT (AR7_REGS_BASE + 0x1f00) +#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00) +#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00) + +#define AR7_RESET_PEREPHERIAL 0x0 +#define AR7_RESET_SOFTWARE 0x4 +#define AR7_RESET_STATUS 0x8 + +#define AR7_RESET_BIT_CPMAC_LO 17 +#define AR7_RESET_BIT_CPMAC_HI 21 +#define AR7_RESET_BIT_MDIO 22 +#define AR7_RESET_BIT_EPHY 26 + +/* GPIO control registers */ +#define AR7_GPIO_INPUT 0x0 +#define AR7_GPIO_OUTPUT 0x4 +#define AR7_GPIO_DIR 0x8 +#define AR7_GPIO_ENABLE 0xC + +#define AR7_CHIP_7100 0x18 +#define AR7_CHIP_7200 0x2b +#define AR7_CHIP_7300 0x05 + +/* Interrupts */ +#define AR7_IRQ_UART0 15 +#define AR7_IRQ_UART1 16 + +/* Clocks */ +#define AR7_AFE_CLOCK 35328000 +#define AR7_REF_CLOCK 25000000 +#define AR7_XTAL_CLOCK 24000000 + +struct plat_cpmac_data { + int reset_bit; + int power_bit; + u32 phy_mask; + char dev_addr[6]; +}; + +struct plat_dsl_data { + int reset_bit_dsl; + int reset_bit_sar; +}; + +extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock; + +static inline u16 ar7_chip_id(void) +{ + return readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) & 0xffff; +} + +static inline u8 ar7_chip_rev(void) +{ + return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; +} + +static inline int ar7_cpu_freq(void) +{ + return ar7_cpu_clock; +} + +static inline int ar7_bus_freq(void) +{ + return ar7_bus_clock; +} + +static inline int ar7_vbus_freq(void) +{ + return ar7_bus_clock / 2; +} +#define ar7_cpmac_freq ar7_vbus_freq + +static inline int ar7_dsp_freq(void) +{ + return ar7_dsp_clock; +} + +static inline int ar7_has_high_cpmac(void) +{ + u16 chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + return 0; + default: + return 1; + } +} +#define ar7_has_high_vlynq ar7_has_high_cpmac +#define ar7_has_second_uart ar7_has_high_cpmac + +static inline void ar7_device_enable(u32 bit) +{ + void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) | (1 << bit), reset_reg); + mdelay(20); +} + +static inline void ar7_device_disable(u32 bit) +{ + void *reset_reg = (void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL); + writel(readl(reset_reg) & ~(1 << bit), reset_reg); + mdelay(20); +} + +static inline void ar7_device_reset(u32 bit) +{ + ar7_device_disable(bit); + ar7_device_enable(bit); +} + +static inline void ar7_device_on(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) | (1 << bit), power_reg); + mdelay(20); +} + +static inline void ar7_device_off(u32 bit) +{ + void *power_reg = (void *)KSEG1ADDR(AR7_REGS_POWER); + writel(readl(power_reg) & ~(1 << bit), power_reg); + mdelay(20); +} + +#endif /* __AR7_H__ */ diff --git a/target/linux/ar7/files/include/asm-mips/ar7/gpio.h b/target/linux/ar7/files/include/asm-mips/ar7/gpio.h new file mode 100644 index 0000000000..1cb11a377b --- /dev/null +++ b/target/linux/ar7/files/include/asm-mips/ar7/gpio.h @@ -0,0 +1,116 @@ +/* + * $Id: gpio.h 6693 2007-03-25 05:42:16Z ejka $ + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __AR7_GPIO_H__ +#define __AR7_GPIO_H__ +#include + +#define AR7_GPIO_MAX 32 + +extern int gpio_request(unsigned gpio, char *label); +extern void gpio_free(unsigned gpio); + +/* Common GPIO layer */ +static inline int gpio_direction_input(unsigned gpio) +{ + void __iomem *gpio_dir = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + writel(readl(gpio_dir) | (1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_direction_output(unsigned gpio) +{ + void __iomem *gpio_dir = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); + + return 0; +} + +static inline int gpio_get_value(unsigned gpio) +{ + void __iomem *gpio_in = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + return ((readl(gpio_in) & (1 << gpio)) != 0); +} + +static inline void gpio_set_value(unsigned gpio, int value) +{ + void __iomem *gpio_out = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); + volatile unsigned tmp; + + if (gpio >= AR7_GPIO_MAX) + return; + + tmp = readl(gpio_out) & ~(1 << gpio); + if (value) + tmp |= 1 << gpio; + writel(tmp, gpio_out); +} + +static inline int gpio_to_irq(unsigned gpio) +{ + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) +{ + return -EINVAL; +} + +/* Board specific GPIO functions */ +static inline int ar7_gpio_enable(unsigned gpio) +{ + void __iomem *gpio_en = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + writel(readl(gpio_en) | (1 << gpio), gpio_en); + + return 0; +} + +static inline int ar7_gpio_disable(unsigned gpio) +{ + void __iomem *gpio_en = (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); + + if (gpio >= AR7_GPIO_MAX) + return -EINVAL; + + writel(readl(gpio_en) & ~(1 << gpio), gpio_en); + + return 0; +} + +#include + +#endif diff --git a/target/linux/ar7/files/include/asm-mips/ar7/mmzone.h b/target/linux/ar7/files/include/asm-mips/ar7/mmzone.h new file mode 100644 index 0000000000..885fdb0cb0 --- /dev/null +++ b/target/linux/ar7/files/include/asm-mips/ar7/mmzone.h @@ -0,0 +1,29 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _ASM_MACH_MMZONE_H +#define _ASM_MACH_MMZONE_H + +extern pg_data_t __node_data[]; +#define NODE_DATA(nid) (&__node_data[nid]) +#define NODE_MEM_MAP(nid) (NODE_DATA(nid)->node_mem_map) +#define pa_to_nid(addr) (((addr) >= ARCH_PFN_OFFSET << PAGE_SHIFT) ? 0 : -1) + +#endif /* _ASM_MACH_MMZONE_H */ diff --git a/target/linux/ar7/files/include/asm-mips/ar7/prom.h b/target/linux/ar7/files/include/asm-mips/ar7/prom.h new file mode 100644 index 0000000000..138941737b --- /dev/null +++ b/target/linux/ar7/files/include/asm-mips/ar7/prom.h @@ -0,0 +1,27 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef __PROM_H__ +#define __PROM_H__ + +extern char *prom_getenv(char *name); +extern void prom_printf(char *fmt, ...); + +#endif /* __PROM_H__ */ diff --git a/target/linux/ar7/files/include/asm-mips/ar7/spaces.h b/target/linux/ar7/files/include/asm-mips/ar7/spaces.h new file mode 100644 index 0000000000..f4d1237925 --- /dev/null +++ b/target/linux/ar7/files/include/asm-mips/ar7/spaces.h @@ -0,0 +1,32 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1994 - 1999, 2000, 03, 04 Ralf Baechle + * Copyright (C) 2000, 2002 Maciej W. Rozycki + * Copyright (C) 1990, 1999, 2000 Silicon Graphics, Inc. + */ +#ifndef _ASM_AR7_SPACES_H +#define _ASM_AR7_SPACES_H + +#define CAC_BASE 0x80000000 +#define IO_BASE 0xa0000000 +#define UNCAC_BASE 0xa0000000 +#define MAP_BASE 0xc0000000 + +/* + * This handles the memory map. + * We handle pages at KSEG0 for kernels with 32 bit address space. + */ +#define PAGE_OFFSET 0x94000000UL +#define PHYS_OFFSET 0x14000000UL + +/* + * Memory above this physical address will be considered highmem. + */ +#ifndef HIGHMEM_START +#define HIGHMEM_START 0x40000000UL +#endif + +#endif /* __ASM_AR7_SPACES_H */ diff --git a/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h b/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h new file mode 100644 index 0000000000..9e35471a38 --- /dev/null +++ b/target/linux/ar7/files/include/asm-mips/ar7/vlynq.h @@ -0,0 +1,92 @@ +/* + * $Id$ + * + * Copyright (C) 2006, 2007 OpenWrt.org + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + + +#ifndef __VLYNQ_H__ +#define __VLYNQ_H__ + +struct vlynq_mapping { + u32 size; + u32 offset; +} __attribute__ ((packed)); + +struct vlynq_device_id { + u32 id; +}; + +struct vlynq_regs; +struct vlynq_device { + u32 id; + int irq; + int local_irq; + int remote_irq; + int clock_div; + u32 regs_start, regs_end; + u32 mem_start, mem_end; + u32 irq_start, irq_end; + void *priv; + struct vlynq_regs *local; + struct vlynq_regs *remote; + struct device dev; +}; + +struct vlynq_driver { + char *name; + int (*probe)(struct vlynq_device *dev); + int (*remove)(struct vlynq_device *dev); + struct device_driver driver; +}; + +#define to_vlynq_driver(drv) container_of(drv, struct vlynq_driver, driver) + +struct plat_vlynq_ops { + int (*on)(struct vlynq_device *dev); + void (*off)(struct vlynq_device *dev); +}; + +#define to_vlynq_device(device) container_of(device, struct vlynq_device, dev) + +extern struct bus_type vlynq_bus_type; + +extern int __vlynq_register_driver(struct vlynq_driver *driver, + struct module *owner); + +static inline int vlynq_register_driver(struct vlynq_driver *driver) +{ + return __vlynq_register_driver(driver, THIS_MODULE); +} + +extern void vlynq_unregister_driver(struct vlynq_driver *driver); +extern int vlynq_device_enable(struct vlynq_device *dev); +extern void vlynq_device_disable(struct vlynq_device *dev); +extern u32 vlynq_local_id(struct vlynq_device *dev); +extern u32 vlynq_remote_id(struct vlynq_device *dev); +extern void vlynq_set_local_mapping(struct vlynq_device *dev, + u32 tx_offset, + struct vlynq_mapping *mapping); +extern void vlynq_set_remote_mapping(struct vlynq_device *dev, + u32 tx_offset, + struct vlynq_mapping *mapping); +extern int vlynq_virq_to_irq(struct vlynq_device *dev, int virq); +extern int vlynq_irq_to_virq(struct vlynq_device *dev, int irq); +extern int vlynq_set_local_irq(struct vlynq_device *dev, int virq); +extern int vlynq_set_remote_irq(struct vlynq_device *dev, int virq); + +#endif /* __VLYNQ_H__ */ diff --git a/target/linux/ar7/files/include/asm-mips/gpio.h b/target/linux/ar7/files/include/asm-mips/gpio.h new file mode 100644 index 0000000000..e69de29bb2 diff --git a/target/linux/ar7/image/Makefile b/target/linux/ar7/image/Makefile new file mode 100644 index 0000000000..27af165533 --- /dev/null +++ b/target/linux/ar7/image/Makefile @@ -0,0 +1,81 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +DROP_SECTIONS := .reginfo .mdebug .comment .note .pdr .options .MIPS.options +OBJCOPY_SREC := $(TARGET_CROSS)objcopy -S -O srec $(addprefix --remove-section=,$(DROP_SECTIONS)) + +LOADADDR := 0x94600000 +KERNEL_ENTRY := 0x94100000 +RAMSTART := 0x94000000 +RAMSIZE := 0x00100000 + +LOADER_MAKEOPTS= \ + KDIR=$(KDIR) \ + LOADADDR=$(LOADADDR) \ + KERNEL_ENTRY=$(KERNEL_ENTRY) \ + RAMSTART=$(RAMSTART) \ + RAMSIZE=$(RAMSIZE) + +CFLAGS := -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ + -pipe -mlong-calls -fno-common \ + -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap \ + -DLOADADDR=$(LOADADDR) + +define Build/Clean + $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader $(LOADER_MAKEOPTS) clean +endef + +define Image/Prepare + cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma + + $(MAKE) -C $(GENERIC_PLATFORM_DIR)/image/lzma-loader \ + $(LOADER_MAKEOPTS) \ + clean compile + $(OBJCOPY_SREC) $(KDIR)/loader.elf $(KDIR)/loader.srec + srec2bin $(KDIR)/loader.srec $(KDIR)/loader.bin +endef + +define align/jffs2-64k +bs=65536 conv=sync +endef + +define align/jffs2-128k +bs=131072 conv=sync +endef + +define Image/Build/CyberTAN + (dd if=/dev/zero bs=16 count=1; cat $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin) | \ + $(STAGING_DIR_HOST)/bin/addpattern -p $(3) -o $(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(4).bin +endef + +#define Image/Build/sErCoMm +# cat sercomm/adam2.bin "$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin" > "$(KDIR)/dgfw.tmp" +# dd if=sercomm/$(2) of="$(KDIR)/dgfw.tmp" bs=$$$$((0x3e0000 - 80)) seek=1 conv=notrunc +# $(STAGING_DIR_HOST)/bin/dgfirmware -f -w "$(BIN_DIR)/openwrt-$(2)-$(KERNEL)-$(3).img" "$(KDIR)/dgfw.tmp" +# rm -f "$(KDIR)/dgfw.tmp" +#endef + +define Image/Build + dd if=$(KDIR)/loader.bin $(call align/$(1)) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin + cat $(KDIR)/root.$(1) >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin + $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin) + $(call Image/Build/CyberTAN,$(1),AG1B,AG1B,$(1)) + $(call Image/Build/CyberTAN,$(1),WA21,WA21,$(1)) + $(call Image/Build/CyberTAN,$(1),WA22,WA22,$(1)) + $(call Image/Build/CyberTAN,$(1),WAG2,WAG2,$(1)) + $(call Image/Build/CyberTAN,$(1),WA31,WA31 -b,$(1)) + $(call Image/Build/CyberTAN,$(1),WA32,WA32 -b,$(1)) + $(call Image/Build/CyberTAN,$(1),WA7A,WA7A -b,$(1)) + $(call Image/Build/CyberTAN,$(1),WA7B,WA7B -b,$(1)) +# $(call Image/Build/sErCoMm,$(1),dg834,$(1)) +# $(call Image/Build/sErCoMm,$(1),jdr454wb,$(1)) +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/ar7/patches-2.6.22/100-board_support.patch b/target/linux/ar7/patches-2.6.22/100-board_support.patch new file mode 100644 index 0000000000..5989580ee8 --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/100-board_support.patch @@ -0,0 +1,75 @@ +diff -urN linux-2.6.22/arch/mips/Kconfig linux-2.6.22.new/arch/mips/Kconfig +--- linux-2.6.22/arch/mips/Kconfig 2007-07-09 01:32:17.000000000 +0200 ++++ linux-2.6.22.new/arch/mips/Kconfig 2007-07-11 02:34:51.000000000 +0200 +@@ -15,6 +15,20 @@ + prompt "System type" + default SGI_IP22 + ++config AR7 ++ bool "Texas Instruments AR7" ++ select BOOT_ELF32 ++ select DMA_NONCOHERENT ++ select HW_HAS_PCI ++ select IRQ_CPU ++ select SWAP_IO_SPACE ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_HAS_EARLY_PRINTK ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_KGDB ++ select SYS_SUPPORTS_LITTLE_ENDIAN ++ select GENERIC_GPIO ++ + config MACH_ALCHEMY + bool "Alchemy processor based machines" + +diff -urN linux-2.6.22/arch/mips/kernel/traps.c linux-2.6.22.new/arch/mips/kernel/traps.c +--- linux-2.6.22/arch/mips/kernel/traps.c 2007-07-09 01:32:17.000000000 +0200 ++++ linux-2.6.22.new/arch/mips/kernel/traps.c 2007-07-11 02:32:39.000000000 +0200 +@@ -1051,11 +1051,6 @@ + unsigned long exception_handlers[32]; + unsigned long vi_handlers[64]; + +-/* +- * As a side effect of the way this is implemented we're limited +- * to interrupt handlers in the address range from +- * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ... +- */ + void *set_except_vector(int n, void *addr) + { + unsigned long handler = (unsigned long) addr; +@@ -1063,9 +1058,15 @@ + + exception_handlers[n] = handler; + if (n == 0 && cpu_has_divec) { +- *(volatile u32 *)(ebase + 0x200) = 0x08000000 | +- (0x03ffffff & (handler >> 2)); +- flush_icache_range(ebase + 0x200, ebase + 0x204); ++ /* lui k0, 0x0000 */ ++ *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16); ++ /* ori k0, 0x0000 */ ++ *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff); ++ /* jr k0 */ ++ *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008; ++ /* nop */ ++ *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000; ++ flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210); + } + return (void *)old_handler; + } +diff -urN linux-2.6.22/arch/mips/Makefile linux-2.6.22.new/arch/mips/Makefile +--- linux-2.6.22/arch/mips/Makefile 2007-07-09 01:32:17.000000000 +0200 ++++ linux-2.6.22.new/arch/mips/Makefile 2007-07-11 02:32:39.000000000 +0200 +@@ -158,6 +158,13 @@ + # + + # ++# Texas Instruments AR7 ++# ++core-$(CONFIG_AR7) += arch/mips/ar7/ ++cflags-$(CONFIG_AR7) += -Iinclude/asm-mips/ar7 ++load-$(CONFIG_AR7) += 0xffffffff94100000 ++ ++# + # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. + # + core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ diff --git a/target/linux/ar7/patches-2.6.22/110-flash.patch b/target/linux/ar7/patches-2.6.22/110-flash.patch new file mode 100644 index 0000000000..b104067540 --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/110-flash.patch @@ -0,0 +1,39 @@ +diff -Nru linux-2.6.19.2/drivers/mtd/Kconfig linux-ar7/drivers/mtd/Kconfig +--- linux-2.6.19.2/drivers/mtd/Kconfig 2006-12-12 02:32:53.000000000 +0700 ++++ linux-ar7/drivers/mtd/Kconfig 2007-02-03 22:47:10.000000000 +0700 +@@ -152,6 +152,12 @@ + for your particular device. It won't happen automatically. The + 'armflash' map driver (CONFIG_MTD_ARMFLASH) does this, for example. + ++config MTD_AR7_PARTS ++ tristate "TI AR7 partitioning support" ++ depends on MTD_PARTITIONS ++ ---help--- ++ TI AR7 partitioning support ++ + comment "User Modules And Translation Layers" + depends on MTD + +diff -Nru linux-2.6.19.2/drivers/mtd/Makefile linux-ar7/drivers/mtd/Makefile +--- linux-2.6.19.2/drivers/mtd/Makefile 2006-12-12 02:32:53.000000000 +0700 ++++ linux-ar7/drivers/mtd/Makefile 2007-02-03 22:02:27.000000000 +0700 +@@ -12,6 +12,7 @@ + obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o + obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o + obj-$(CONFIG_MTD_AFS_PARTS) += afs.o ++obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o + + # 'Users' - code which presents functionality to userspace. + obj-$(CONFIG_MTD_CHAR) += mtdchar.o +diff -Nru linux-2.6.19.2/drivers/mtd/maps/physmap.c linux-ar7/drivers/mtd/maps/physmap.c +--- linux-2.6.19.2/drivers/mtd/maps/physmap.c 2006-12-12 02:32:53.000000000 +0700 ++++ linux-ar7/drivers/mtd/maps/physmap.c 2007-02-03 21:57:11.000000000 +0700 +@@ -74,7 +74,7 @@ + + static const char *rom_probe_types[] = { "cfi_probe", "jedec_probe", "map_rom", NULL }; + #ifdef CONFIG_MTD_PARTITIONS +-static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL }; ++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL }; + #endif + + static int physmap_flash_probe(struct platform_device *dev) diff --git a/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch b/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch new file mode 100644 index 0000000000..41a8b8e02f --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/120-gpio_chrdev.patch @@ -0,0 +1,30 @@ +diff -ruN linux-2.6.19.2-orig/drivers/char/Kconfig linux-2.6.19.2-ar7/drivers/char/Kconfig +--- linux-2.6.19.2-orig/drivers/char/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-ar7/drivers/char/Kconfig 2007-02-19 01:22:23.000000000 +0100 +@@ -920,6 +920,15 @@ + To compile this driver as a module, choose M here: the + module will be called mwave. + ++config AR7_GPIO ++ tristate "TI AR7 GPIO Support" ++ depends on AR7 ++ help ++ Give userspace access to the GPIO pins on the Texas Instruments AR7 ++ processors. ++ ++ If compiled as a module, it will be called ar7_gpio. ++ + config SCx200_GPIO + tristate "NatSemi SCx200 GPIO Support" + depends on SCx200 +diff -ruN linux-2.6.19.2-orig/drivers/char/Makefile linux-2.6.19.2-ar7/drivers/char/Makefile +--- linux-2.6.19.2-orig/drivers/char/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-ar7/drivers/char/Makefile 2007-02-19 01:22:23.000000000 +0100 +@@ -83,6 +83,7 @@ + obj-$(CONFIG_PPDEV) += ppdev.o + obj-$(CONFIG_NWBUTTON) += nwbutton.o + obj-$(CONFIG_NWFLASH) += nwflash.o ++obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o + obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o + obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o + obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o diff --git a/target/linux/ar7/patches-2.6.22/130-leds.patch b/target/linux/ar7/patches-2.6.22/130-leds.patch new file mode 100644 index 0000000000..261b712196 --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/130-leds.patch @@ -0,0 +1,27 @@ +diff -ruN linux-2.6.19.2-orig/drivers/leds/Kconfig linux-2.6.19.2-ar7/drivers/leds/Kconfig +--- linux-2.6.19.2-orig/drivers/leds/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-ar7/drivers/leds/Kconfig 2007-02-24 02:30:48.000000000 +0100 +@@ -19,6 +19,12 @@ + + comment "LED drivers" + ++config LEDS_AR7 ++ tristate "LED Support for the TI AR7" ++ depends LEDS_CLASS && AR7 ++ help ++ This option enables support for the LEDs on TI AR7. ++ + config LEDS_CORGI + tristate "LED Support for the Sharp SL-C7x0 series" + depends LEDS_CLASS && PXA_SHARP_C7xx +diff -ruN linux-2.6.19.2-orig/drivers/leds/Makefile linux-2.6.19.2-ar7/drivers/leds/Makefile +--- linux-2.6.19.2-orig/drivers/leds/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-ar7/drivers/leds/Makefile 2007-02-24 02:29:44.000000000 +0100 +@@ -5,6 +5,7 @@ + obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o + + # LED Platform Drivers ++obj-$(CONFIG_LEDS_AR7) += leds-ar7.o + obj-$(CONFIG_LEDS_CORGI) += leds-corgi.o + obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o + obj-$(CONFIG_LEDS_SPITZ) += leds-spitz.o diff --git a/target/linux/ar7/patches-2.6.22/140-watchdog.patch b/target/linux/ar7/patches-2.6.22/140-watchdog.patch new file mode 100644 index 0000000000..163df40ba6 --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/140-watchdog.patch @@ -0,0 +1,27 @@ +diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig +--- linux-2.6.19.2-orig/drivers/char/watchdog/Kconfig 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-ar7/drivers/char/watchdog/Kconfig 2007-02-26 12:49:29.000000000 +0100 +@@ -544,6 +544,12 @@ + + # MIPS Architecture + ++config AR7_WDT ++ tristate "TI AR7 Watchdog Timer" ++ depends on WATCHDOG && AR7 ++ help ++ Hardware driver for the TI AR7 Watchdog Timer. ++ + config INDYDOG + tristate "Indy/I2 Hardware Watchdog" + depends on WATCHDOG && SGI_IP22 +diff -ruN linux-2.6.19.2-orig/drivers/char/watchdog/Makefile linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile +--- linux-2.6.19.2-orig/drivers/char/watchdog/Makefile 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2-ar7/drivers/char/watchdog/Makefile 2007-02-26 12:46:36.000000000 +0100 +@@ -71,6 +71,7 @@ + obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o + + # MIPS Architecture ++obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_INDYDOG) += indydog.o + + # S390 Architecture diff --git a/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch b/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch new file mode 100644 index 0000000000..ca603ad610 --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/200-ethernet_driver.patch @@ -0,0 +1,30 @@ +diff -Nru linux-2.6.19.2/drivers/net/Kconfig linux-ar7/drivers/net/Kconfig +--- linux-2.6.19.2/drivers/net/Kconfig 2006-12-12 02:32:53.000000000 +0700 ++++ linux-ar7/drivers/net/Kconfig 2007-01-29 21:52:22.000000000 +0700 +@@ -1777,6 +1777,15 @@ + workstations. + See . + ++config CPMAC ++ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" ++ depends on NET_ETHERNET && EXPERIMENTAL && AR7 ++ select PHYLIB ++ select FIXED_PHY ++ select FIXED_MII_100_FDX ++ help ++ TI AR7 CPMAC Ethernet support ++ + config NET_POCKET + bool "Pocket and portable adapters" + depends on NET_ETHERNET && PARPORT +diff -Nru linux-2.6.19.2/drivers/net/Makefile linux-ar7/drivers/net/Makefile +--- linux-2.6.19.2/drivers/net/Makefile 2006-12-12 02:32:53.000000000 +0700 ++++ linux-ar7/drivers/net/Makefile 2007-01-29 21:52:22.000000000 +0700 +@@ -148,6 +148,7 @@ + obj-$(CONFIG_8139TOO) += 8139too.o + obj-$(CONFIG_ZNET) += znet.o + obj-$(CONFIG_LAN_SAA9730) += saa9730.o ++obj-$(CONFIG_CPMAC) += cpmac.o + obj-$(CONFIG_DEPCA) += depca.o + obj-$(CONFIG_EWRK3) += ewrk3.o + obj-$(CONFIG_ATP) += atp.o diff --git a/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch b/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch new file mode 100644 index 0000000000..c8eceebb50 --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/210-phy_fixed.patch @@ -0,0 +1,93 @@ +Index: linux-2.6.21.4/drivers/net/phy/fixed.c +=================================================================== +--- linux-2.6.21.4.orig/drivers/net/phy/fixed.c 2007-06-11 16:30:06.418483448 +0200 ++++ linux-2.6.21.4/drivers/net/phy/fixed.c 2007-06-11 16:30:11.156763120 +0200 +@@ -187,6 +187,19 @@ + .driver = { .owner = THIS_MODULE,}, + }; + ++static void fixed_mdio_release (struct device * dev) ++{ ++ struct phy_device *phydev = container_of(dev, struct phy_device, dev); ++ struct mii_bus *bus = phydev->bus; ++ struct fixed_info *fixed = bus->priv; ++ ++ kfree(phydev); ++ kfree(bus->dev); ++ kfree(bus); ++ kfree(fixed->regs); ++ kfree(fixed); ++} ++ + /*----------------------------------------------------------------------------- + * This func is used to create all the necessary stuff, bind + * the fixed phy driver and register all it on the mdio_bus_type. +@@ -221,6 +234,12 @@ + } + + fixed->regs = kzalloc(MII_REGS_NUM*sizeof(int), GFP_KERNEL); ++ if (NULL == fixed->regs) { ++ kfree(dev); ++ kfree(new_bus); ++ kfree(fixed); ++ return -ENOMEM; ++ } + fixed->regs_num = MII_REGS_NUM; + fixed->phy_status.speed = speed; + fixed->phy_status.duplex = duplex; +@@ -249,8 +268,11 @@ + fixed->phydev = phydev; + + if(NULL == phydev) { +- err = -ENOMEM; +- goto device_create_fail; ++ kfree(dev); ++ kfree(new_bus); ++ kfree(fixed->regs); ++ kfree(fixed); ++ return -ENOMEM; + } + + phydev->irq = PHY_IGNORE_INTERRUPT; +@@ -262,8 +283,33 @@ + else + snprintf(phydev->dev.bus_id, BUS_ID_SIZE, + "fixed@%d:%d", speed, duplex); ++ + phydev->bus = new_bus; + ++#if 1 ++ phydev->dev.driver = &fixed_mdio_driver.driver; ++ phydev->dev.release = fixed_mdio_release; ++ ++ err = phydev->dev.driver->probe(&phydev->dev); ++ if(err < 0) { ++ printk(KERN_ERR "Phy %s: problems with fixed driver\n", ++ phydev->dev.bus_id); ++ kfree(phydev); ++ kfree(dev); ++ kfree(new_bus); ++ kfree(fixed->regs); ++ kfree(fixed); ++ return err; ++ } ++ ++ err = device_register(&phydev->dev); ++ if(err) { ++ printk(KERN_ERR "Phy %s failed to register\n", ++ phydev->dev.bus_id); ++ } ++ ++ return 0; ++#else + err = device_register(&phydev->dev); + if(err) { + printk(KERN_ERR "Phy %s failed to register\n", +@@ -306,6 +354,7 @@ + kfree(fixed); + + return err; ++#endif + } + + diff --git a/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch b/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch new file mode 100644 index 0000000000..da38903a32 --- /dev/null +++ b/target/linux/ar7/patches-2.6.22/500-serial_kludge.patch @@ -0,0 +1,62 @@ +diff -urN linux-2.6.22.orig/drivers/serial/8250.c linux-2.6.22/drivers/serial/8250.c +--- linux-2.6.22.orig/drivers/serial/8250.c 2007-07-09 01:32:17.000000000 +0200 ++++ linux-2.6.22/drivers/serial/8250.c 2007-07-11 03:08:57.000000000 +0200 +@@ -258,6 +258,13 @@ + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10, + .flags = UART_CAP_FIFO, + }, ++ [PORT_AR7] = { ++ .name = "TI-AR7", ++ .fifo_size = 16, ++ .tx_loadsz = 16, ++ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00, ++ .flags = UART_CAP_FIFO | UART_CAP_AFE, ++ }, + }; + + #if defined (CONFIG_SERIAL_8250_AU1X00) +@@ -2436,7 +2443,7 @@ + { + struct uart_8250_port *up = (struct uart_8250_port *)port; + +- wait_for_xmitr(up, UART_LSR_THRE); ++ wait_for_xmitr(up, BOTH_EMPTY); + serial_out(up, UART_TX, ch); + } + +diff -urN linux-2.6.22.orig/include/linux/serial_core.h linux-2.6.22/include/linux/serial_core.h +--- linux-2.6.22.orig/include/linux/serial_core.h 2007-07-09 01:32:17.000000000 +0200 ++++ linux-2.6.22/include/linux/serial_core.h 2007-07-11 03:09:49.000000000 +0200 +@@ -40,6 +40,7 @@ + #define PORT_NS16550A 14 + #define PORT_XSCALE 15 + #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */ ++#define PORT_AR7 16 + #define PORT_MAX_8250 16 /* max port ID */ + + /* +diff -urN linux-2.6.22.orig/include/linux/serialP.h linux-2.6.22/include/linux/serialP.h +--- linux-2.6.22.orig/include/linux/serialP.h 2007-07-09 01:32:17.000000000 +0200 ++++ linux-2.6.22/include/linux/serialP.h 2007-07-11 03:08:57.000000000 +0200 +@@ -135,6 +135,9 @@ + * the interrupt line _up_ instead of down, so if we register the IRQ + * while the UART is in that state, we die in an IRQ storm. */ + #define ALPHA_KLUDGE_MCR (UART_MCR_OUT2) ++#elif defined(CONFIG_AR7) ++/* This is how it is set up by bootloader... */ ++#define ALPHA_KLUDGE_MCR (UART_MCR_OUT2 | UART_MCR_OUT1 | UART_MCR_RTS | UART_MCR_DTR) + #else + #define ALPHA_KLUDGE_MCR 0 + #endif +diff -urN linux-2.6.22.orig/scripts/setlocalversion linux-2.6.22/scripts/setlocalversion +--- linux-2.6.22.orig/scripts/setlocalversion 2007-07-09 01:32:17.000000000 +0200 ++++ linux-2.6.22/scripts/setlocalversion 2007-07-11 03:08:57.000000000 +0200 +@@ -1,6 +1,8 @@ + #!/bin/sh + # Print additional version information for non-release trees. + ++exit 0 ++ + usage() { + echo "Usage: $0 [srctree]" >&2 + exit 1 diff --git a/target/linux/ar7/profiles/100-Texas.mk b/target/linux/ar7/profiles/100-Texas.mk new file mode 100644 index 0000000000..a9306ca702 --- /dev/null +++ b/target/linux/ar7/profiles/100-Texas.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Texas + NAME:=Texas Instruments WiFi (default) + PACKAGES:=kmod-acx +endef + +define Profile/Texas/Description + Package set compatible with hardware using Texas Instruments WiFi cards +endef +$(eval $(call Profile,Texas)) + diff --git a/target/linux/ar7/profiles/110-None.mk b/target/linux/ar7/profiles/110-None.mk new file mode 100644 index 0000000000..2fcfacde9f --- /dev/null +++ b/target/linux/ar7/profiles/110-None.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/None + NAME:=No WiFi + PACKAGES:= +endef + +define Profile/None/Description + Package set without WiFi support +endef +$(eval $(call Profile,None)) + diff --git a/target/linux/ar7/src/adam2patcher.c b/target/linux/ar7/src/adam2patcher.c new file mode 100644 index 0000000000..25a78074a6 --- /dev/null +++ b/target/linux/ar7/src/adam2patcher.c @@ -0,0 +1,59 @@ +/* + * patcher.c - ADAM2 patcher for Netgear DG834 (and compatible) + * + * Copyright (C) 2006 Felix Fietkau + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +int main(int argc, char **argv) +{ + int fd; + char *ptr; + uint32_t *i; + + if (argc != 2) { + fprintf(stderr, "Usage: %s \n", argv[0]); + exit(1); + } + + if (((fd = open(argv[1], O_RDWR)) < 0) + || ((ptr = mmap(0, 128 * 1024, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)) == (void *) (-1))) { + fprintf(stderr, "Can't open file\n"); + exit(1); + } + + i = (uint32_t *) &ptr[0x3944]; + if (*i == 0x0c000944) { + fprintf(stderr, "Unpatched ADAM2 detected. Patching... "); + *i = 0x00000000; + msync(i, sizeof(*i), MS_SYNC|MS_INVALIDATE); + fprintf(stderr, "done!\n"); + } else if (*i == 0x00000000) { + fprintf(stderr, "Patched ADAM2 detected.\n"); + } else { + fprintf(stderr, "Unknown ADAM2 detected. Can't patch!\n"); + } + + close(fd); +} diff --git a/target/linux/at91-2.6/Makefile b/target/linux/at91-2.6/Makefile deleted file mode 100644 index f8ca6f6be3..0000000000 --- a/target/linux/at91-2.6/Makefile +++ /dev/null @@ -1,27 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -include $(TOPDIR)/rules.mk - -ARCH:=arm -BOARD:=at91 -BOARDNAME:=AT91 -FEATURES:=squashfs usb - -#LINUX_VERSION:=2.6.21.5 -LINUX_VERSION:=2.6.22.4 - -define Target/Description - Build fimware images for Figment Design Labs VersaLink board. -endef - -include $(INCLUDE_DIR)/kernel-build.mk - -#include the profiles --include profiles/*.mk - -KERNELNAME:="uImage" -$(eval $(call BuildKernel)) diff --git a/target/linux/at91-2.6/base-files/default/etc/inittab b/target/linux/at91-2.6/base-files/default/etc/inittab deleted file mode 100644 index a627ce5ffa..0000000000 --- a/target/linux/at91-2.6/base-files/default/etc/inittab +++ /dev/null @@ -1,6 +0,0 @@ -::sysinit:/etc/init.d/rcS S boot -::shutdown:/etc/init.d/rcS K stop -tts/0::askfirst:/bin/ash --login -ttyS0::askfirst:/bin/ash --login - -ttyS2::respawn:/sbin/getty -L ttyS2 115200 vt100 diff --git a/target/linux/at91-2.6/base-files/default/etc/ipkg.conf b/target/linux/at91-2.6/base-files/default/etc/ipkg.conf deleted file mode 100644 index 10c4f67c66..0000000000 --- a/target/linux/at91-2.6/base-files/default/etc/ipkg.conf +++ /dev/null @@ -1,3 +0,0 @@ -src snapshots http://vlink.guthrie.homedns.org/vlink3 -dest root / -dest ram /tmp diff --git a/target/linux/at91-2.6/config/default b/target/linux/at91-2.6/config/default deleted file mode 100644 index 5e74bd616e..0000000000 --- a/target/linux/at91-2.6/config/default +++ /dev/null @@ -1,305 +0,0 @@ -# CONFIG_AEABI is not set -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_ARCH_AAEC2000 is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200=y -# CONFIG_ARCH_AT91RM9200DK is not set -# CONFIG_ARCH_AT91SAM9260 is not set -# CONFIG_ARCH_AT91SAM9261 is not set -# CONFIG_ARCH_AT91SAM9263 is not set -# CONFIG_ARCH_AT91SAM9RL is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_ARCH_VERSATILE is not set -CONFIG_ARM=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_ARM_THUMB=y -# CONFIG_ARPD is not set -# CONFIG_ARTHUR is not set -# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set -CONFIG_AT91_SPI=y -# CONFIG_AT91_SPIDEV is not set -# CONFIG_ATMEL_TCLIB is not set -CONFIG_ATM_DRIVERS=y -# CONFIG_ATM_DUMMY is not set -# CONFIG_ATM_TCP is not set -CONFIG_BASE_SMALL=0 -# CONFIG_BINFMT_AOUT is not set -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BONDING is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_BT is not set -# CONFIG_CIFS_STATS is not set -# CONFIG_CLS_U32_MARK is not set -# CONFIG_CLS_U32_PERF is not set -# CONFIG_CONFIGFS_FS is not set -CONFIG_CPU_32=y -CONFIG_CPU_32v4T=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_ARM920T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_TLB_V4WBI=y -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_BLKCIPHER=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_CRC32C is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HMAC=y -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_WP512 is not set -CONFIG_DAVICOM_PHY=y -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_USER is not set -# CONFIG_DM9000 is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FIXED_PHY is not set -# CONFIG_FPE_FASTFPE is not set -CONFIG_FPE_NWFPE=y -# CONFIG_FPE_NWFPE_XP is not set -CONFIG_FRAME_POINTER=y -CONFIG_FS_POSIX_ACL=y -CONFIG_FW_LOADER=m -# CONFIG_GENERIC_CLOCKEVENTS is not set -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_TIME is not set -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HID=y -CONFIG_HW_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_I2C is not set -# CONFIG_IKCONFIG is not set -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=y -# CONFIG_INPUT_EVDEV is not set -CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_IP6_NF_MATCH_FRAG is not set -# CONFIG_IP6_NF_MATCH_HL is not set -# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -# CONFIG_IP6_NF_MATCH_OPTS is not set -# CONFIG_IP6_NF_MATCH_RT is not set -# CONFIG_IP6_NF_RAW is not set -# CONFIG_IP6_NF_TARGET_HL is not set -# CONFIG_IP6_NF_TARGET_LOG is not set -# CONFIG_IP_NF_ARPTABLES is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_TARGET_LOG is not set -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_LEDS_TIMER=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_LIBCRC32C is not set -# CONFIG_LLC2 is not set -# CONFIG_MACH_AT91RM9200EK is not set -# CONFIG_MACH_ATEB9200 is not set -# CONFIG_MACH_CARMEVA is not set -# CONFIG_MACH_CHUB is not set -# CONFIG_MACH_CSB337 is not set -# CONFIG_MACH_CSB637 is not set -# CONFIG_MACH_KAFA is not set -# CONFIG_MACH_KB9200 is not set -# CONFIG_MACH_ONEARM is not set -# CONFIG_MACH_PICOTUX2XX is not set -CONFIG_MMC=m -CONFIG_MMC_AT91=m -CONFIG_MMC_BLOCK=m -# CONFIG_MMC_DEBUG is not set -# CONFIG_MMC_UNSAFE_RESUME is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_AFS_PARTS is not set -CONFIG_MTD_AT91_DATAFLASH=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -# CONFIG_MTD_CFI is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CHAR=y -CONFIG_MTD_CMDLINE_PARTS=y -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DATAFLASH26 is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ROOTFS_ROOT_DEV is not set -# CONFIG_MTD_ROOTFS_SPLIT is not set -# CONFIG_MTD_SLRAM is not set -CONFIG_NETDEV_1000=y -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_IPGRE_BROADCAST is not set -# CONFIG_NET_PKTGEN is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_NET_SCH_NETEM is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_NO_IDLE_HZ is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_NVRAM is not set -# CONFIG_OUTER_CACHE is not set -CONFIG_PHYLIB=y -# CONFIG_PNPACPI is not set -# CONFIG_PPPOATM is not set -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_ROMFS_FS is not set -CONFIG_RTC_LIB=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250 is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_SERIAL_ATMEL_TTYAT is not set -CONFIG_SERIO=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SMC91X is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_SOUND is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4096 -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_TICK_ONESHOT is not set -CONFIG_UID16=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB_ATM is not set -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_MON=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_SERIAL_EDGEPORT is not set -# CONFIG_USB_SERIAL_EDGEPORT_TI is not set -# CONFIG_USB_SERIAL_FUNSOFT is not set -# CONFIG_USB_SERIAL_GARMIN is not set -# CONFIG_USB_SERIAL_IPAQ is not set -# CONFIG_USB_SERIAL_IPW is not set -# CONFIG_USB_SERIAL_IR is not set -# CONFIG_USB_SERIAL_KEYSPAN is not set -# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set -# CONFIG_USB_SERIAL_KLSI is not set -# CONFIG_USB_SERIAL_KOBIL_SCT is not set -# CONFIG_USB_SERIAL_MCT_U232 is not set -# CONFIG_USB_SERIAL_OMNINET is not set -# CONFIG_USB_SERIAL_OPTION is not set -# CONFIG_USB_SERIAL_SAFE is not set -# CONFIG_USB_SERIAL_VISOR is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_USBNET_MII is not set -CONFIG_VECTORS_BASE=0xffff0000 -# CONFIG_VGASTATE is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -# CONFIG_WATCHDOG is not set -# CONFIG_XIP_KERNEL is not set -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 diff --git a/target/linux/at91-2.6/files/drivers/mtd/at91part.c b/target/linux/at91-2.6/files/drivers/mtd/at91part.c deleted file mode 100644 index bfa9590492..0000000000 --- a/target/linux/at91-2.6/files/drivers/mtd/at91part.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * $Id: at91part.c 6948 2007-04-15 04:01:45Z hcg $ - * - * Copyright (C) 2007 OpenWrt.org - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * Atmel AT91 flash partition table. (Modified by Hamish Guthrie). - * Based on ar7 map by Felix Fietkau. - * - */ - -#include -#include - -#include -#include -#include -#include - -static struct mtd_partition at91_parts[6]; - -static int create_mtd_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - unsigned long origin) -{ - unsigned int offset, len; - unsigned int pre_size = 0x42000, root_max = 0x362400; - unsigned char buf[512]; - struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; - - printk("Parsing AT91 partition map...\n"); - - at91_parts[0].name = "loaders"; - at91_parts[0].offset = 0; - at91_parts[0].size = 0x21000; - at91_parts[0].mask_flags = MTD_WRITEABLE; - - at91_parts[1].name = "ubparams"; - at91_parts[1].offset = 0x21000; - at91_parts[1].size = 0x8400; - at91_parts[1].mask_flags = 0; - - at91_parts[2].name = "kernel"; - at91_parts[2].offset = pre_size; - at91_parts[2].size = 0; - at91_parts[2].mask_flags = 0; - - at91_parts[3].name = "rootfs"; - at91_parts[3].offset = 0; - at91_parts[3].size = 0; - at91_parts[3].mask_flags = 0; - - for(offset = pre_size; offset < root_max; offset += master->erasesize) { - - memset(&buf, 0xe5, sizeof(buf)); - - if (master->read(master, offset, sizeof(buf), &len, buf) || len != sizeof(buf)) - break; - - if (*((__u32 *) buf) == SQUASHFS_MAGIC) { - printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", - master->name, (u32) sb->bytes_used); - - at91_parts[3].size = sb->bytes_used; - at91_parts[3].offset = offset; - len = at91_parts[3].offset + at91_parts[3].size; - len = ((len / (master->erasesize * 8)) + 1) * master->erasesize * 8; - at91_parts[3].size = len - at91_parts[3].offset; - at91_parts[2].size = offset - at91_parts[2].offset; - break; - } - } - - if (at91_parts[3].size == 0) { - printk(KERN_NOTICE "%s: Couldn't find root filesystem\n", master->name); - return -1; - } - - at91_parts[4].name = "rootfs_data"; - at91_parts[4].offset = root_max; - at91_parts[4].size = master->size - root_max; - at91_parts[4].mask_flags = 0; - - at91_parts[5].name = "complete"; - at91_parts[5].offset = 0; - at91_parts[5].size = master->size; - at91_parts[5].mask_flags = 0; - - *pparts = at91_parts; - return 6; -} - -static struct mtd_part_parser at91_parser = { - .owner = THIS_MODULE, - .parse_fn = create_mtd_partitions, - .name = "at91part", -}; - -static int __init at91_parser_init(void) -{ - return register_mtd_parser(&at91_parser); -} - -module_init(at91_parser_init); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Felix Fietkau, Eugene Konev, Hamish Guthrie"); -MODULE_DESCRIPTION("MTD partitioning for Atmel at91"); diff --git a/target/linux/at91-2.6/image/Config.in b/target/linux/at91-2.6/image/Config.in deleted file mode 100644 index 6607f6c325..0000000000 --- a/target/linux/at91-2.6/image/Config.in +++ /dev/null @@ -1,35 +0,0 @@ -config AT91_DFBOOT - bool "Build dataflashboot loader" - depends LINUX_2_6_AT91 - default y - -config AT91_UBOOT - bool "Build u-boot loader" - depends LINUX_2_6_AT91 - default y - -config UBOOT_TARGET - string "U-Boot Board Configuration" - depends LINUX_2_6_AT91 - depends AT91_UBOOT - default "vlink" - help - For all supported boards there are ready-to-use default - configurations available; just type "". - -config UBOOT_IPADDR - string "IP Address for U-Boot" - depends LINUX_2_6_AT91 - depends AT91_UBOOT - default "192.168.0.178" - help - IP address of device to be used in U-Boot - -config UBOOT_SERVERIP - string "IP Address of TFTP server" - depends LINUX_2_6_AT91 - depends AT91_UBOOT - default "192.168.0.232" - help - IP address of TFTP server for U-Boot - diff --git a/target/linux/at91-2.6/image/Makefile b/target/linux/at91-2.6/image/Makefile deleted file mode 100644 index 7e855f06ef..0000000000 --- a/target/linux/at91-2.6/image/Makefile +++ /dev/null @@ -1,45 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/image.mk - -define Build/Clean - $(MAKE) -C dfboot clean - $(MAKE) -C u-boot clean -endef - -define Build/Compile - $(MAKE) -C dfboot compile - $(MAKE) -C u-boot compile - $(KDIR)/u-boot-1.1.4/tools/ubparams - cp params $(KDIR) -endef - -define Image/Prepare - cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage - cp $(KDIR)/dfboot/dfboot.bin $(KDIR)/dfboot.bin - cp $(KDIR)/dfboot/dfbptest.bin $(KDIR)/dfbptest.bin - cp $(KDIR)/u-boot-1.1.4/u-boot.bin $(KDIR)/u-boot.bin - dd if=$(KDIR)/u-boot.bin of=$(KDIR)/u-boot.block bs=100k count=1 conv=sync - cat $(KDIR)/u-boot.block $(KDIR)/params > $(KDIR)/u-boot.full -endef - -define Image/BuildKernel - cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage -endef - -define Image/Build - dd if=$(KDIR)/uImage of=$(KDIR)/uImage.block bs=8448 conv=sync - dd if=$(KDIR)/root.squashfs of=$(KDIR)/root.block bs=8448 conv=sync - cat $(KDIR)/uImage.block $(KDIR)/root.block > $(KDIR)/knlroot.bin - $(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).trx -f $(KDIR)/dfboot.bin -f$(KDIR)/u-boot.full -f$(KDIR)/knlroot.bin - cp $(KDIR)/dfbptest.bin $(BIN_DIR) - $(call Image/Build/$(1),$(1)) -endef - -$(eval $(call BuildImage)) diff --git a/target/linux/at91-2.6/image/dfboot/Makefile b/target/linux/at91-2.6/image/dfboot/Makefile deleted file mode 100644 index 355a4b540f..0000000000 --- a/target/linux/at91-2.6/image/dfboot/Makefile +++ /dev/null @@ -1,35 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id$ - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=dfboot -PKG_VERSION:=0.1 -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME) - -include $(INCLUDE_DIR)/package.mk - -define Build/Prepare - mkdir -p $(PKG_BUILD_DIR) - $(CP) ./src/* $(PKG_BUILD_DIR)/ -endef - -define Build/Compile - $(MAKE) -C $(PKG_BUILD_DIR) \ - $(TARGET_CONFIGURE_OPTS) \ - CFLAGS="$(TARGET_CFLAGS)" -endef - -define Build/InstallDev - dd if=$(PKG_BUILD_DIR)/binary/dfboot.bin of=$(PKG_BUILD_DIR)/binary/dfboot.block bs=32k count=1 conv=sync -endef - -$(eval $(call Build/DefaultTargets)) diff --git a/target/linux/at91-2.6/image/dfboot/src/Makefile b/target/linux/at91-2.6/image/dfboot/src/Makefile deleted file mode 100644 index ff92e0d499..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/Makefile +++ /dev/null @@ -1,94 +0,0 @@ -# Makefile for DataFlashBoot.bin -# Must use toolchain with H/W FLoating Point - -BASENAME=dfboot -BINNAME=$(BASENAME).bin -OUTNAME=$(BASENAME).out -LSSNAME=$(BASENAME).lss -MAPNAME=$(BASENAME).map - -BASENAME2=dfbptest -BINNAME2=$(BASENAME2).bin -OUTNAME2=$(BASENAME2).out -LSSNAME2=$(BASENAME2).lss -MAPNAME2=$(BASENAME2).map - -INCPATH=include - -CFLAGS_LOCAL=-Os -Wall -I$(INCPATH) -BUILD=$(CC) $(CFLAGS) $(CFLAGS_LOCAL) - -LDFLAGS+=-T elf32-littlearm.lds -Ttext 0 -LINK=$(LD) $(LDFLAGS) - -OBJS=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\ - objs/div0.o objs/init.o objs/main.o objs/asm_isr.o objs/asm_mci_isr.o\ - objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o - -OBJS2=objs/cstartup_ram.o objs/at45.o objs/com.o objs/dataflash.o\ - objs/div0.o objs/init.o objs/ptmain.o objs/asm_isr.o objs/asm_mci_isr.o\ - objs/mci_device.o objs/jump.o objs/_udivsi3.o objs/_umodsi3.o - -I=config.h com.h dataflash.h embedded_services.h main.h stdio.h include/AT91RM9200.h include/lib_AT91RM9200.h - -all:clean $(BASENAME) $(BASENAME2) - -$(BASENAME): $(OBJS) - $(LINK) -n -o $(OUTNAME) $(OBJS) - $(OBJCOPY) $(OUTNAME) -O binary $(BINNAME) - $(OBJDUMP) -h -s $(OUTNAME) > $(LSSNAME) - $(NM) -n $(OUTNAME) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME) - cp $(BINNAME) binary - -$(BASENAME2): $(OBJS2) - $(LINK) -n -o $(OUTNAME2) $(OBJS2) - $(OBJCOPY) $(OUTNAME2) -O binary $(BINNAME2) - $(OBJDUMP) -h -s $(OUTNAME2) > $(LSSNAME2) - $(NM) -n $(OUTNAME2) | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $(MAPNAME2) - cp $(BINNAME2) binary - -# C objects here -objs/at45.o: at45.c $(I) - $(BUILD) -c -o objs/at45.o at45.c -objs/com.o: com.c $(I) - $(BUILD) -c -o objs/com.o com.c -objs/dataflash.o: dataflash.c $(I) - $(BUILD) -c -o objs/dataflash.o dataflash.c -objs/mci_device.o: mci_device.c $(I) - $(BUILD) -c -o objs/mci_device.o mci_device.c -objs/div0.o: div0.c $(I) - $(BUILD) -c -o objs/div0.o div0.c -objs/init.o: init.c $(I) - $(BUILD) -c -o objs/init.o init.c -objs/main.o: main.c $(I) - $(BUILD) -c -o objs/main.o main.c -objs/ptmain.o: main.c $(I) - $(BUILD) -c -D PRODTEST -o objs/ptmain.o main.c - -# ASM objects here -objs/asm_isr.o: asm_isr.S - $(BUILD) -c -o objs/asm_isr.o asm_isr.S -objs/asm_mci_isr.o: asm_mci_isr.S - $(BUILD) -c -o objs/asm_mci_isr.o asm_mci_isr.S -objs/cstartup_ram.o: cstartup_ram.S - $(BUILD) -c -o objs/cstartup_ram.o cstartup_ram.S -objs/jump.o: jump.S - $(BUILD) -c -o objs/jump.o jump.S -objs/_udivsi3.o: _udivsi3.S - $(BUILD) -c -o objs/_udivsi3.o _udivsi3.S -objs/_umodsi3.o: _umodsi3.S - $(BUILD) -c -o objs/_umodsi3.o _umodsi3.S - -install: $(BINNAME) $(BINNAME2) - cp $(BINNAME) binary - cp $(BINNAME2) binary - -clean: - rm -f *~ - rm -f objs/* - rm -f *.out - rm -f *.bin - rm -f *.lss - rm -f *.map - rm -f .unpacked - mkdir -p objs diff --git a/target/linux/at91-2.6/image/dfboot/src/_udivsi3.S b/target/linux/at91-2.6/image/dfboot/src/_udivsi3.S deleted file mode 100644 index 2cdcd48b49..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/_udivsi3.S +++ /dev/null @@ -1,77 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -dividend .req r0 -divisor .req r1 -result .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __udivsi3 - .type __udivsi3 ,function - .align 0 - __udivsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - mov result, #0 - cmp dividend, divisor - bcc Lgot_result -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions, and note which bits - @ are done in the result. On the final pass, this may subtract - @ too much from the dividend, but the result will be ok, since the - @ "bit" will have been shifted out at the bottom. - cmp dividend, divisor - subcs dividend, dividend, divisor - orrcs result, result, curbit - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs result, result, curbit, lsr #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs result, result, curbit, lsr #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs result, result, curbit, lsr #3 - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 -Lgot_result: - mov r0, result - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __udivsi3 , . - __udivsi3 -/* # 235 "libgcc1.S" */ -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/target/linux/at91-2.6/image/dfboot/src/_umodsi3.S b/target/linux/at91-2.6/image/dfboot/src/_umodsi3.S deleted file mode 100644 index e4aebe84ca..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/_umodsi3.S +++ /dev/null @@ -1,88 +0,0 @@ -/* # 1 "libgcc1.S" */ -@ libgcc1 routines for ARM cpu. -@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk) -/* # 145 "libgcc1.S" */ -dividend .req r0 -divisor .req r1 -overdone .req r2 -curbit .req r3 -/* ip .req r12 */ -/* sp .req r13 */ -/* lr .req r14 */ -/* pc .req r15 */ - .text - .globl __umodsi3 - .type __umodsi3 ,function - .align 0 - __umodsi3 : - cmp divisor, #0 - beq Ldiv0 - mov curbit, #1 - cmp dividend, divisor - movcc pc, lr -Loop1: - @ Unless the divisor is very big, shift it up in multiples of - @ four bits, since this is the amount of unwinding in the main - @ division loop. Continue shifting until the divisor is - @ larger than the dividend. - cmp divisor, #0x10000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #4 - movcc curbit, curbit, lsl #4 - bcc Loop1 -Lbignum: - @ For very big divisors, we must shift it a bit at a time, or - @ we will be in danger of overflowing. - cmp divisor, #0x80000000 - cmpcc divisor, dividend - movcc divisor, divisor, lsl #1 - movcc curbit, curbit, lsl #1 - bcc Lbignum -Loop3: - @ Test for possible subtractions. On the final pass, this may - @ subtract too much from the dividend, so keep track of which - @ subtractions are done, we can fix them up afterwards... - mov overdone, #0 - cmp dividend, divisor - subcs dividend, dividend, divisor - cmp dividend, divisor, lsr #1 - subcs dividend, dividend, divisor, lsr #1 - orrcs overdone, overdone, curbit, ror #1 - cmp dividend, divisor, lsr #2 - subcs dividend, dividend, divisor, lsr #2 - orrcs overdone, overdone, curbit, ror #2 - cmp dividend, divisor, lsr #3 - subcs dividend, dividend, divisor, lsr #3 - orrcs overdone, overdone, curbit, ror #3 - mov ip, curbit - cmp dividend, #0 @ Early termination? - movnes curbit, curbit, lsr #4 @ No, any more bits to do? - movne divisor, divisor, lsr #4 - bne Loop3 - @ Any subtractions that we should not have done will be recorded in - @ the top three bits of "overdone". Exactly which were not needed - @ are governed by the position of the bit, stored in ip. - @ If we terminated early, because dividend became zero, - @ then none of the below will match, since the bit in ip will not be - @ in the bottom nibble. - ands overdone, overdone, #0xe0000000 - moveq pc, lr @ No fixups needed - tst overdone, ip, ror #3 - addne dividend, dividend, divisor, lsr #3 - tst overdone, ip, ror #2 - addne dividend, dividend, divisor, lsr #2 - tst overdone, ip, ror #1 - addne dividend, dividend, divisor, lsr #1 - mov pc, lr -Ldiv0: - str lr, [sp, #-4]! - bl __div0 (PLT) - mov r0, #0 @ about as wrong as it could be - ldmia sp!, {pc} - .size __umodsi3 , . - __umodsi3 -/* # 320 "libgcc1.S" */ -/* # 421 "libgcc1.S" */ -/* # 433 "libgcc1.S" */ -/* # 456 "libgcc1.S" */ -/* # 500 "libgcc1.S" */ -/* # 580 "libgcc1.S" */ diff --git a/target/linux/at91-2.6/image/dfboot/src/asm_isr.S b/target/linux/at91-2.6/image/dfboot/src/asm_isr.S deleted file mode 100644 index 8d1d52e191..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/asm_isr.S +++ /dev/null @@ -1,75 +0,0 @@ -#include "AT91RM9200_inc.h" - -#define ARM_MODE_USER 0x10 -#define ARM_MODE_FIQ 0x11 -#define ARM_MODE_IRQ 0x12 -#define ARM_MODE_SVC 0x13 -#define ARM_MODE_ABORT 0x17 -#define ARM_MODE_UNDEF 0x1B -#define ARM_MODE_SYS 0x1F - -#define I_BIT 0x80 -#define F_BIT 0x40 -#define T_BIT 0x20 - - -/* ----------------------------------------------------------------------------- - AT91F_ASM_SPI_Handler - --------------------- - Handler called by the AIC - - Save context - Call C handler - Restore context - ----------------------------------------------------------------------------- */ - -.global AT91F_ST_ASM_HANDLER - -AT91F_ST_ASM_HANDLER: -/* Adjust and save LR_irq in IRQ stack */ - sub r14, r14, #4 - stmfd sp!, {r14} - -/* Write in the IVR to support Protect Mode - No effect in Normal Mode - De-assert the NIRQ and clear the source in Protect Mode */ - ldr r14, =AT91C_BASE_AIC - str r14, [r14, #AIC_IVR] - -/* Save SPSR and r0 in IRQ stack */ - mrs r14, SPSR - stmfd sp!, {r0, r14} - -/* Enable Interrupt and Switch in SYS Mode */ - mrs r0, CPSR - bic r0, r0, #I_BIT - orr r0, r0, #ARM_MODE_SYS - msr CPSR_c, r0 - -/* Save scratch/used registers and LR in User Stack */ - stmfd sp!, { r1-r3, r12, r14} - - ldr r1, =AT91F_ST_HANDLER - mov r14, pc - bx r1 - -/* Restore scratch/used registers and LR from User Stack */ - ldmia sp!, { r1-r3, r12, r14} - -/* Disable Interrupt and switch back in IRQ mode */ - mrs r0, CPSR - bic r0, r0, #ARM_MODE_SYS - orr r0, r0, #I_BIT | ARM_MODE_IRQ - msr CPSR_c, r0 - -/* Mark the End of Interrupt on the AIC */ - ldr r0, =AT91C_BASE_AIC - str r0, [r0, #AIC_EOICR] - -/* Restore SPSR_irq and r0 from IRQ stack */ - ldmia sp!, {r0, r14} - msr SPSR_cxsf, r14 - -/* Restore adjusted LR_irq from IRQ stack directly in the PC */ - ldmia sp!, {pc}^ - diff --git a/target/linux/at91-2.6/image/dfboot/src/asm_mci_isr.S b/target/linux/at91-2.6/image/dfboot/src/asm_mci_isr.S deleted file mode 100644 index 0f66fc0d69..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/asm_mci_isr.S +++ /dev/null @@ -1,75 +0,0 @@ -#include - -#define ARM_MODE_USER 0x10 -#define ARM_MODE_FIQ 0x11 -#define ARM_MODE_IRQ 0x12 -#define ARM_MODE_SVC 0x13 -#define ARM_MODE_ABORT 0x17 -#define ARM_MODE_UNDEF 0x1B -#define ARM_MODE_SYS 0x1F - -#define I_BIT 0x80 -#define F_BIT 0x40 -#define T_BIT 0x20 - - -/* ----------------------------------------------------------------------------- - AT91F_ASM_MCI_Handler - --------------------- - Handler called by the AIC - - Save context - Call C handler - Restore context - ----------------------------------------------------------------------------- */ - -.global AT91F_ASM_MCI_Handler - -AT91F_ASM_MCI_Handler: -/* Adjust and save LR_irq in IRQ stack */ - sub r14, r14, #4 - stmfd sp!, {r14} - -/* Write in the IVR to support Protect Mode - No effect in Normal Mode - De-assert the NIRQ and clear the source in Protect Mode */ - ldr r14, =AT91C_BASE_AIC - str r14, [r14, #AIC_IVR] - -/* Save SPSR and r0 in IRQ stack */ - mrs r14, SPSR - stmfd sp!, {r0, r14} - -/* Enable Interrupt and Switch in SYS Mode */ - mrs r0, CPSR - bic r0, r0, #I_BIT - orr r0, r0, #ARM_MODE_SYS - msr CPSR_c, r0 - -/* Save scratch/used registers and LR in User Stack */ - stmfd sp!, { r1-r3, r12, r14} - - ldr r1, =AT91F_MCI_Handler - mov r14, pc - bx r1 - -/* Restore scratch/used registers and LR from User Stack */ - ldmia sp!, { r1-r3, r12, r14} - -/* Disable Interrupt and switch back in IRQ mode */ - mrs r0, CPSR - bic r0, r0, #ARM_MODE_SYS - orr r0, r0, #I_BIT | ARM_MODE_IRQ - msr CPSR_c, r0 - -/* Mark the End of Interrupt on the AIC */ - ldr r0, =AT91C_BASE_AIC - str r0, [r0, #AIC_EOICR] - -/* Restore SPSR_irq and r0 from IRQ stack */ - ldmia sp!, {r0, r14} - msr SPSR_cxsf, r14 - -/* Restore adjusted LR_irq from IRQ stack directly in the PC */ - ldmia sp!, {pc}^ - diff --git a/target/linux/at91-2.6/image/dfboot/src/at45.c b/target/linux/at91-2.6/image/dfboot/src/at45.c deleted file mode 100644 index 8830d7e9b8..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/at45.c +++ /dev/null @@ -1,595 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : at45c.h - * Object : - * - * 1.0 10/12/03 HIi : Creation. - * 1.01 03/05/04 HIi : Bug Fix in AT91F_DataFlashWaitReady() Function. - *---------------------------------------------------------------------------- - */ -#include "config.h" -#include "stdio.h" -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "dataflash.h" -#include "main.h" - - -/*----------------------------------------------------------------------------*/ -/* \fn AT91F_SpiInit */ -/* \brief SPI Low level Init */ -/*----------------------------------------------------------------------------*/ -void AT91F_SpiInit(void) { - /* Configure PIOs */ - AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | - AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | - AT91C_PA6_NPCS3 | AT91C_PA0_MISO | - AT91C_PA2_SPCK; - AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | - AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | - AT91C_PA6_NPCS3 | AT91C_PA0_MISO | - AT91C_PA2_SPCK; - /* Enable CLock */ - AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI; - - /* Reset the SPI */ - AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST; - - /* Configure SPI in Master Mode with No CS selected !!! */ - AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; - - /* Configure CS0 and CS3 */ - *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); - *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | - (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | - ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); -} - - -/*----------------------------------------------------------------------------*/ -/* \fn AT91F_SpiEnable */ -/* \brief Enable SPI chip select */ -/*----------------------------------------------------------------------------*/ -static void AT91F_SpiEnable(int cs) { - switch(cs) { - case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ - AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH << 16) & AT91C_SPI_PCS); - break; - case 3: /* Configure SPI CS3 for Serial DataFlash Card */ - /* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */ - AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7; /* Set in PIO mode */ - AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7; /* Configure in output */ - /* Clear Output */ - AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7; - /* Configure PCS */ - AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; - AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); - break; - } - - /* SPI_Enable */ - AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; -} - -/*----------------------------------------------------------------------------*/ -/* \fn AT91F_SpiWrite */ -/* \brief Set the PDC registers for a transfert */ -/*----------------------------------------------------------------------------*/ -static unsigned int AT91F_SpiWrite(AT91PS_DataflashDesc pDesc) -{ - unsigned int timeout; - - AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - - /* Initialize the Transmit and Receive Pointer */ - AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ; - AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ; - - /* Intialize the Transmit and Receive Counters */ - AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size; - AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size; - - if ( pDesc->tx_data_size != 0 ) { - /* Initialize the Next Transmit and Next Receive Pointer */ - AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ; - AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ; - - /* Intialize the Next Transmit and Next Receive Counters */ - AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ; - AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ; - } - - /* ARM simple, non interrupt dependent timer */ - timeout = 0; - - AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; - while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF)); - - AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; - - if (timeout >= AT91C_DATAFLASH_TIMEOUT){ - return AT91C_DATAFLASH_ERROR; - } - - return AT91C_DATAFLASH_OK; -} - - -/*----------------------------------------------------------------------*/ -/* \fn AT91F_DataFlashSendCommand */ -/* \brief Generic function to send a command to the dataflash */ -/*----------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashSendCommand( - AT91PS_DataFlash pDataFlash, - unsigned char OpCode, - unsigned int CmdSize, - unsigned int DataflashAddress) -{ - unsigned int adr; - - /* process the address to obtain page address and byte address */ - adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) - << pDataFlash->pDevice->page_offset) + - (DataflashAddress % (pDataFlash->pDevice->pages_size)); - - /* fill the command buffer */ - pDataFlash->pDataFlashDesc->command[0] = OpCode; - if (pDataFlash->pDevice->pages_number >= 16384) - { - pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24); - pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16); - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8); - pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF); - } - else - { - pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16); - pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8); - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ; - pDataFlash->pDataFlashDesc->command[4] = 0; - } - pDataFlash->pDataFlashDesc->command[5] = 0; - pDataFlash->pDataFlashDesc->command[6] = 0; - pDataFlash->pDataFlashDesc->command[7] = 0; - - /* Initialize the SpiData structure for the spi write fuction */ - pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize ; - pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize ; - - return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); -} - - -/*----------------------------------------------------------------------*/ -/* \fn AT91F_DataFlashGetStatus */ -/* \brief Read the status register of the dataflash */ -/*----------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) -{ - AT91S_DataFlashStatus status; - - /* first send the read status command (D7H) */ - pDesc->command[0] = DB_STATUS; - pDesc->command[1] = 0; - - pDesc->DataFlash_state = GET_STATUS; - pDesc->tx_data_size = 0 ; /* Transmit the command and receive response */ - pDesc->tx_cmd_pt = pDesc->command ; - pDesc->rx_cmd_pt = pDesc->command ; - pDesc->rx_cmd_size = 2 ; - pDesc->tx_cmd_size = 2 ; - status = AT91F_SpiWrite (pDesc); - - pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); - return status; -} - -/*----------------------------------------------------------------------------- - * Function Name : AT91F_DataFlashWaitReady - * Object : wait for dataflash ready (bit7 of the status register == 1) - * Input Parameters : DataFlash Service and timeout - * Return value : DataFlash status "ready or not" - *----------------------------------------------------------------------------- - */ -static AT91S_DataFlashStatus AT91F_DataFlashWaitReady( - AT91PS_DataflashDesc pDataFlashDesc, - unsigned int timeout) -{ - pDataFlashDesc->DataFlash_state = IDLE; - do { - AT91F_DataFlashGetStatus(pDataFlashDesc); - timeout--; - } - while(((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0)); - - if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) - return AT91C_DATAFLASH_ERROR; - - return AT91C_DATAFLASH_OK; -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashContinuousRead */ -/* Object : Continuous stream Read */ -/* Input Parameters : DataFlash Service */ -/* : = dataflash address */ -/* : <*dataBuffer> = data buffer pointer */ -/* : = data buffer size */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashContinuousRead( - AT91PS_DataFlash pDataFlash, - int src, - unsigned char *dataBuffer, - int sizeToRead ) -{ - AT91S_DataFlashStatus status; - /* Test the size to read in the device */ - if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) - return AT91C_DATAFLASH_MEMORY_OVERFLOW; - - pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead; - pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; - pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; - - status = AT91F_DataFlashSendCommand(pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); - /* Send the command to the dataflash */ - return(status); -} - - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_MainMemoryToBufferTransfer */ -/* Object : Read a page in the SRAM Buffer 1 or 2 */ -/* Input Parameters : DataFlash Service */ -/* : Page concerned */ -/* : */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfer( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int page) -{ - int cmdsize; - /* Test if the buffer command is legal */ - if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF)) - return AT91C_DATAFLASH_BAD_COMMAND; - - /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; - cmdsize = 4; - if (pDataFlash->pDevice->pages_number >= 16384) - cmdsize = 5; - return(AT91F_DataFlashSendCommand(pDataFlash, BufferCommand, cmdsize, - page*pDataFlash->pDevice->pages_size)); -} - - - -/*----------------------------------------------------------------------------- */ -/* Function Name : AT91F_DataFlashWriteBuffer */ -/* Object : Write data to the internal sram buffer 1 or 2 */ -/* Input Parameters : DataFlash Service */ -/* : = command to write buffer1 or buffer2 */ -/* : <*dataBuffer> = data buffer to write */ -/* : = address in the internal buffer */ -/* : = data buffer size */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned char *dataBuffer, - unsigned int bufferAddress, - int SizeToWrite ) -{ - int cmdsize; - /* Test if the buffer command is legal */ - if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE)) - return AT91C_DATAFLASH_BAD_COMMAND; - - /* buffer address must be lower than page size */ - if (bufferAddress > pDataFlash->pDevice->pages_size) - return AT91C_DATAFLASH_BAD_ADDRESS; - - /* Send first Write Command */ - pDataFlash->pDataFlashDesc->command[0] = BufferCommand; - pDataFlash->pDataFlashDesc->command[1] = 0; - if (pDataFlash->pDevice->pages_number >= 16384) - { - pDataFlash->pDataFlashDesc->command[2] = 0; - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; - pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; - cmdsize = 5; - } - else - { - pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; - pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; - pDataFlash->pDataFlashDesc->command[4] = 0; - cmdsize = 4; - } - - pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ; - pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; - pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ; - - pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer ; - pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer ; - pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ; - pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; - - return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_PageErase */ -/* Object : Read a page in the SRAM Buffer 1 or 2 */ -/* Input Parameters : DataFlash Service */ -/* : Page concerned */ -/* : */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_PageErase( - AT91PS_DataFlash pDataFlash, - unsigned int page) -{ - int cmdsize; - /* Test if the buffer command is legal */ - /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; - - cmdsize = 4; - if (pDataFlash->pDevice->pages_number >= 16384) - cmdsize = 5; - return(AT91F_DataFlashSendCommand(pDataFlash, DB_PAGE_ERASE, cmdsize, - page*pDataFlash->pDevice->pages_size)); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_WriteBufferToMain */ -/* Object : Write buffer to the main memory */ -/* Input Parameters : DataFlash Service */ -/* : = command to send to buf1 or buf2 */ -/* : = main memory address */ -/* Return value : State of the dataflash */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_WriteBufferToMain ( - AT91PS_DataFlash pDataFlash, - unsigned char BufferCommand, - unsigned int dest ) -{ - int cmdsize; - /* Test if the buffer command is correct */ - if ((BufferCommand != DB_BUF1_PAGE_PGM) && - (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && - (BufferCommand != DB_BUF2_PAGE_PGM) && - (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) - return AT91C_DATAFLASH_BAD_COMMAND; - - /* no data to transmit or receive */ - pDataFlash->pDataFlashDesc->tx_data_size = 0; - - cmdsize = 4; - if (pDataFlash->pDevice->pages_number >= 16384) - cmdsize = 5; - /* Send the command to the dataflash */ - return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest)); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_PartialPageWrite */ -/* Object : Erase partially a page */ -/* Input Parameters : = page number */ -/* : = adr to begin the fading */ -/* : = Number of bytes to erase */ -/*------------------------------------------------------------------------------*/ -static AT91S_DataFlashStatus AT91F_PartialPageWrite ( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - unsigned int dest, - unsigned int size) -{ - unsigned int page; - unsigned int AdrInPage; - - page = dest / (pDataFlash->pDevice->pages_size); - AdrInPage = dest % (pDataFlash->pDevice->pages_size); - - /* Read the contents of the page in the Sram Buffer */ - AT91F_MainMemoryToBufferTransfer(pDataFlash, DB_PAGE_2_BUF1_TRF, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /*Update the SRAM buffer */ - AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /* Erase page if a 128 Mbits device */ - if (pDataFlash->pDevice->pages_number >= 16384) - { - AT91F_PageErase(pDataFlash, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - } - - /* Rewrite the modified Sram Buffer in the main memory */ - return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, - (page*pDataFlash->pDevice->pages_size))); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashWrite */ -/* Object : */ -/* Input Parameters : <*src> = Source buffer */ -/* : = dataflash adress */ -/* : = data buffer size */ -/*------------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashWrite( - AT91PS_DataFlash pDataFlash, - unsigned char *src, - int dest, - int size ) -{ - unsigned int length; - unsigned int page; - unsigned int status; - - AT91F_SpiEnable(pDataFlash->pDevice->cs); - - if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) - return AT91C_DATAFLASH_MEMORY_OVERFLOW; - - /* If destination does not fit a page start address */ - if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) { - length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); - - if (size < length) - length = size; - - if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) - return AT91C_DATAFLASH_ERROR; - - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /* Update size, source and destination pointers */ - size -= length; - dest += length; - src += length; - } - - while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) - { - /* program dataflash page */ - page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); - - status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, - 0, pDataFlash->pDevice->pages_size); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - status = AT91F_PageErase(pDataFlash, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - if (!status) - return AT91C_DATAFLASH_ERROR; - - status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest); - if(!status) - return AT91C_DATAFLASH_ERROR; - - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - - /* Update size, source and destination pointers */ - size -= pDataFlash->pDevice->pages_size ; - dest += pDataFlash->pDevice->pages_size ; - src += pDataFlash->pDevice->pages_size ; - } - - /* If still some bytes to read */ - if ( size > 0 ) { - /* program dataflash page */ - if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) - return AT91C_DATAFLASH_ERROR; - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - } - return AT91C_DATAFLASH_OK; -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashRead */ -/* Object : Read a block in dataflash */ -/* Input Parameters : */ -/* Return value : */ -/*------------------------------------------------------------------------------*/ -int AT91F_DataFlashRead( - AT91PS_DataFlash pDataFlash, - unsigned long addr, - unsigned long size, - char *buffer) -{ - unsigned long SizeToRead; - - AT91F_SpiEnable(pDataFlash->pDevice->cs); - - if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT) != AT91C_DATAFLASH_OK) - return -1; - - while (size) - { - SizeToRead = (size < 0x8000)? size:0x8000; - - if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT) - != AT91C_DATAFLASH_OK) - return -1; - - if (AT91F_DataFlashContinuousRead (pDataFlash, addr, (unsigned char *)buffer, - SizeToRead) != AT91C_DATAFLASH_OK) - return -1; - - size -= SizeToRead; - addr += SizeToRead; - buffer += SizeToRead; - } - - return AT91C_DATAFLASH_OK; -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataflashProbe */ -/* Object : */ -/* Input Parameters : */ -/* Return value : Dataflash status register */ -/*------------------------------------------------------------------------------*/ -int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) -{ - AT91F_SpiEnable(cs); - AT91F_DataFlashGetStatus(pDesc); - return ((pDesc->command[1] == 0xFF)? 0: (pDesc->command[1] & 0x3C)); -} - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataFlashErase */ -/* Object : */ -/* Input Parameters : <*pDataFlash> = Device info */ -/*------------------------------------------------------------------------------*/ -AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash) -{ - unsigned int page; - unsigned int status; - - AT91F_SpiEnable(pDataFlash->pDevice->cs); - - for(page=0; page < pDataFlash->pDevice->pages_number; page++) - { - /* Erase dataflash page */ - if ((page & 0x00FF) == 0) - printf("\rERA %d/%d", page, pDataFlash->pDevice->pages_number); - status = AT91F_PageErase(pDataFlash, page); - AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_DATAFLASH_TIMEOUT); - if (!status) - return AT91C_DATAFLASH_ERROR; - } - - return AT91C_DATAFLASH_OK; -} - diff --git a/target/linux/at91-2.6/image/dfboot/src/com.c b/target/linux/at91-2.6/image/dfboot/src/com.c deleted file mode 100644 index aacfb55558..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/com.c +++ /dev/null @@ -1,368 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : com.c - * Object : - * Creation : HIi 03/27/2003 - * - *---------------------------------------------------------------------------- - */ -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "config.h" -#include "com.h" -#include "stdio.h" - -static char erase_seq[] = "\b \b"; /* erase sequence */ - -#define MAX_UARTS 1 - -//unsigned int usa[2] = {(unsigned int)AT91C_BASE_DBGU, (unsigned int)AT91C_ALTERNATE_USART}; -unsigned int usa[1] = {(unsigned int)AT91C_BASE_DBGU}; -unsigned int us; -int port_detected; - -void at91_init_uarts(void) -{ - int i; - - port_detected = 0; - AT91F_DBGU_CfgPIO(); - AT91F_US0_CfgPIO(); - AT91F_US0_CfgPMC(); - - for(i=0; i 16) - return 0; - c = (type & ZEROPAD) ? '0' : ' '; - sign = 0; - - if(type & SIGN && num < 0) - { - sign = '-'; - num = -num; - size--; - } - - i = 0; - if(num == 0) - tmp[i++] = digits[0]; - else while(num != 0) - tmp[i++] = digits[do_div(num, base)]; - - if(i > precision) - precision = i; - size -= precision; - - if(!(type&(ZEROPAD+LEFT))) - while(size-->0) - putc(' '); - - if(sign) - putc(sign); - - if (!(type & LEFT)) - while (size-- > 0) - putc(c); - - while (i < precision--) - putc('0'); - - while (i-- > 0) - putc(tmp[i]); - - while (size-- > 0) - putc(' ');; - - return 1; -} - -int hvfprintf(const char *fmt, va_list va) -{ - char *s; - - do { - if(*fmt == '%') { - bool done = false; - - int type = 0; - int precision = 0; - - do { - fmt++; - switch(*fmt) { - case '0' : - if(!precision) - type |= ZEROPAD; - case '1' : - case '2' : - case '3' : - case '4' : - case '5' : - case '6' : - case '7' : - case '8' : - case '9' : - precision = precision * 10 + (*fmt - '0'); - break; - case '.' : - break; - case 's' : - s = va_arg(va, char *); - if(!s) - puts(""); - else - puts(s); - done = true; - break; - case 'c' : - putc(va_arg(va, int)); - done = true; - break; - case 'd' : - number(va_arg(va, int), 10, 0, precision, type); - done = true; - break; - case 'x' : - case 'X' : - number(va_arg(va, int), 16, 0, precision, type); - done = true; - break; - case '%' : - putc(*fmt); - done = true; - default: - putc('%'); - putc(*fmt); - done = true; - break; - } - } while(!done); - } else if(*fmt == '\\') { - fmt++; - if(*fmt == 'r') { - putc('\r'); - } else if(*fmt == 'n') { - putc('\n'); - } - } else { - putc(*fmt); - } - fmt++; - } while(*fmt != 0); - - return 0; -} - -int printf(const char *fmt, ...) -{ - va_list ap; - int i; - - va_start(ap, fmt); - i = hvfprintf(fmt, ap); - va_end(ap); - - return i; -} diff --git a/target/linux/at91-2.6/image/dfboot/src/com.h b/target/linux/at91-2.6/image/dfboot/src/com.h deleted file mode 100644 index 7af09e4d6d..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/com.h +++ /dev/null @@ -1,28 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : com.h - * Object : - * - * 1.0 27/03/03 HIi : Creation - *---------------------------------------------------------------------------- - */ -#ifndef com_h -#define com_h - -#define AT91C_CB_SIZE 20 /* size of the console buffer */ - -/* Escape sequences */ -#define ESC \033 - -extern int AT91F_ReadLine (const char *const prompt, char *console_buffer); -extern void AT91F_WaitKeyPressed(void); - -#endif - diff --git a/target/linux/at91-2.6/image/dfboot/src/config.h b/target/linux/at91-2.6/image/dfboot/src/config.h deleted file mode 100644 index 3be8d499a0..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/config.h +++ /dev/null @@ -1,17 +0,0 @@ - -#ifndef _CONFIG_H -#define _CONFIG_H - -//#define PAGESZ_1056 1 -#undef PAGESZ_1056 -#define SPI_LOW_SPEED 1 -#define AT91C_DELAY_TO_BOOT 1500 - -#define CRC_RETRIES 0x100 - -#define AT91C_MASTER_CLOCK 59904000 -#define AT91C_BAUD_RATE 115200 - -#define AT91C_ALTERNATE_USART AT91C_BASE_US0 - -#endif diff --git a/target/linux/at91-2.6/image/dfboot/src/cstartup_ram.S b/target/linux/at91-2.6/image/dfboot/src/cstartup_ram.S deleted file mode 100644 index 223900098d..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/cstartup_ram.S +++ /dev/null @@ -1,144 +0,0 @@ -#include "AT91RM9200_inc.h" - -/*--------------------------- -ARM Core Mode and Status Bits ----------------------------*/ -.section start - .text - -#define ARM_MODE_USER 0x10 -#define ARM_MODE_FIQ 0x11 -#define ARM_MODE_IRQ 0x12 -#define ARM_MODE_SVC 0x13 -#define ARM_MODE_ABORT 0x17 -#define ARM_MODE_UNDEF 0x1B -#define ARM_MODE_SYS 0x1F - -#define I_BIT 0x80 -#define F_BIT 0x40 -#define T_BIT 0x20 - -/*---------------------------------------------------------------------------- - Area Definition ----------------- - Must be defined as function to put first in the code as it must be mapped - at offset 0 of the flash EBI_CSR0, ie. at address 0 before remap. -_---------------------------------------------------------------------------*/ - - .align 4 - .globl _start -_start: - -/*---------------------------------------------------------------------------- - Exception vectors ( before Remap ) ------------------------------------- - These vectors are read at address 0. - They absolutely requires to be in relative addresssing mode in order to - guarantee a valid jump. For the moment, all are just looping (what may be - dangerous in a final system). If an exception occurs before remap, this - would result in an infinite loop. -----------------------------------------------------------------------------*/ - b reset /* reset */ - b undefvec /* Undefined Instruction */ - b swivec /* Software Interrupt */ - b pabtvec /* Prefetch Abort */ - b dabtvec /* Data Abort */ - b rsvdvec /* reserved */ - b aicvec /* IRQ : read the AIC */ - b fiqvec /* FIQ */ - -undefvec: -swivec: -pabtvec: -dabtvec: -rsvdvec: -aicvec: -fiqvec: - b undefvec - -reset: - -#define MEMEND 0x00004000 - -/* ---------------------------- - Setup the stack for each mode ----------------------------- */ - -#define IRQ_STACK_SIZE 0x10 -#define FIQ_STACK_SIZE 0x04 -#define ABT_STACK_SIZE 0x04 -#define UND_STACK_SIZE 0x04 -#define SVC_STACK_SIZE 0x10 -#define USER_STACK_SIZE 0x400 - - ldr r0,= MEMEND - -/*- Set up Supervisor Mode and set Supervisor Mode Stack*/ - msr CPSR_c, #ARM_MODE_SVC | I_BIT | F_BIT - mov r13, r0 /* Init stack Undef*/ - sub r0, r0, #SVC_STACK_SIZE - -/*- Set up Interrupt Mode and set IRQ Mode Stack*/ - msr CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT - mov r13, r0 /* Init stack IRQ*/ - sub r0, r0, #IRQ_STACK_SIZE - -/*- Set up Fast Interrupt Mode and set FIQ Mode Stack*/ - msr CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT - mov r13, r0 /* Init stack FIQ*/ - sub r0, r0, #FIQ_STACK_SIZE - -/*- Set up Abort Mode and set Abort Mode Stack*/ - msr CPSR_c, #ARM_MODE_ABORT | I_BIT | F_BIT - mov r13, r0 /* Init stack Abort*/ - sub r0, r0, #ABT_STACK_SIZE - -/*- Set up Undefined Instruction Mode and set Undef Mode Stack*/ - msr CPSR_c, #ARM_MODE_UNDEF | I_BIT | F_BIT - mov r13, r0 /* Init stack Undef*/ - sub r0, r0, #UND_STACK_SIZE - -/*- Set up user Mode and set System Mode Stack*/ - msr CPSR_c, #ARM_MODE_SYS | I_BIT | F_BIT - bic r0, r0, #3 /* Insure word alignement */ - mov sp, r0 /* Init stack System */ - - - ldr r0, = AT91F_LowLevelInit - mov lr, pc - bx r0 - -/*---------------------------------------- - Read/modify/write CP15 control register -----------------------------------------*/ - mrc p15, 0, r0, c1, c0,0 /* read cp15 control registre (cp15 r1) in r0 */ - ldr r3,= 0xC0000080 /* Reset bit :Little Endian end fast bus mode */ - ldr r4,= 0xC0001000 /* Set bit :Asynchronous clock mode, Not Fast Bus, I-Cache enable */ - bic r0, r0, r3 - orr r0, r0, r4 - mcr p15, 0, r0, c1, c0,0 /* write r0 in cp15 control registre (cp15 r1) */ - -/* Enable interrupts */ - msr CPSR_c, #ARM_MODE_SYS | F_BIT - -/*------------------------------------------------------------------------------ -- Branch on C code Main function (with interworking) ----------------------------------------------------- -- Branch must be performed by an interworking call as either an ARM or Thumb -- _start function must be supported. This makes the code not position- -- independent. A Branch with link would generate errors -----------------------------------------------------------------------------*/ - -/*- Branch to _start by interworking*/ - ldr r4, = main - mov lr, pc - bx r4 - -/*----------------------------------------------------------------------------- -- Loop for ever ---------------- -- End of application. Normally, never occur. -- Could jump on Software Reset ( B 0x0 ). -------------------------------------------------------------------------------*/ -End: - b End diff --git a/target/linux/at91-2.6/image/dfboot/src/dataflash.c b/target/linux/at91-2.6/image/dfboot/src/dataflash.c deleted file mode 100644 index 5e54460b72..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/dataflash.c +++ /dev/null @@ -1,208 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : dataflash.c - * Object : High level functions for the dataflash - * Creation : HIi 10/10/2003 - *---------------------------------------------------------------------------- - */ -#include "config.h" -#include "stdio.h" -#include "dataflash.h" - - -AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; -static AT91S_DataFlash DataFlashInst; - -int cs[][CFG_MAX_DATAFLASH_BANKS] = { - {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ - {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3} -}; - -int AT91F_DataflashInit(void) -{ - int i; - int dfcode; - int Nb_device = 0; - - AT91F_SpiInit(); - - for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { - dataflash_info[i].id = 0; - dataflash_info[i].Device.pages_number = 0; - dfcode = AT91F_DataflashProbe (cs[i][1], &dataflash_info[i].Desc); - - switch (dfcode) { - case AT45DB161: - dataflash_info[i].Device.pages_number = 4096; - dataflash_info[i].Device.pages_size = 528; - dataflash_info[i].Device.page_offset = 10; - dataflash_info[i].Device.byte_mask = 0x300; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - - case AT45DB321: - dataflash_info[i].Device.pages_number = 8192; - dataflash_info[i].Device.pages_size = 528; - dataflash_info[i].Device.page_offset = 10; - dataflash_info[i].Device.byte_mask = 0x300; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - - case AT45DB642: - dataflash_info[i].Device.pages_number = 8192; - dataflash_info[i].Device.pages_size = 1056; - dataflash_info[i].Device.page_offset = 11; - dataflash_info[i].Device.byte_mask = 0x700; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - case AT45DB128: - dataflash_info[i].Device.pages_number = 16384; - dataflash_info[i].Device.pages_size = 1056; - dataflash_info[i].Device.page_offset = 11; - dataflash_info[i].Device.byte_mask = 0x700; - dataflash_info[i].Device.cs = cs[i][1]; - dataflash_info[i].Desc.DataFlash_state = IDLE; - dataflash_info[i].logical_address = cs[i][0]; - dataflash_info[i].id = dfcode; - Nb_device++; - break; - default: - break; - } - } - return (Nb_device); -} - - -void AT91F_DataflashPrintInfo(void) -{ - int i; - for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) { - if (dataflash_info[i].id != 0) { - printf ("DF:AT45DB"); - switch (dataflash_info[i].id) { - case AT45DB161: - printf ("161"); - break; - - case AT45DB321: - printf ("321"); - break; - - case AT45DB642: - printf ("642"); - break; - case AT45DB128: - printf ("128"); - break; - } - - printf ("\n# PG: %6d\n" - "PG SZ: %6d\n" - "SZ=%8d bytes\n" - "ADDR: %08X\n", - (unsigned int) dataflash_info[i].Device.pages_number, - (unsigned int) dataflash_info[i].Device.pages_size, - (unsigned int) dataflash_info[i].Device.pages_number * - dataflash_info[i].Device.pages_size, - (unsigned int) dataflash_info[i].logical_address); - } - } -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : AT91F_DataflashSelect */ -/* Object : Select the correct device */ -/*------------------------------------------------------------------------------*/ -static AT91PS_DataFlash AT91F_DataflashSelect(AT91PS_DataFlash pFlash, - unsigned int *addr) -{ - char addr_valid = 0; - int i; - - for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) - if ((*addr & 0xFF000000) == dataflash_info[i].logical_address) { - addr_valid = 1; - break; - } - if (!addr_valid) { - pFlash = (AT91PS_DataFlash) 0; - return pFlash; - } - pFlash->pDataFlashDesc = &(dataflash_info[i].Desc); - pFlash->pDevice = &(dataflash_info[i].Device); - *addr -= dataflash_info[i].logical_address; - return (pFlash); -} - - -/*------------------------------------------------------------------------------*/ -/* Function Name : read_dataflash */ -/* Object : dataflash memory read */ -/*------------------------------------------------------------------------------*/ -int read_dataflash(unsigned long addr, unsigned long size, char *result) -{ - unsigned int AddrToRead = addr; - AT91PS_DataFlash pFlash = &DataFlashInst; - - pFlash = AT91F_DataflashSelect (pFlash, &AddrToRead); - if (pFlash == 0) - return -1; - - return (AT91F_DataFlashRead(pFlash, AddrToRead, size, result)); -} - - -/*-----------------------------------------------------------------------------*/ -/* Function Name : write_dataflash */ -/* Object : write a block in dataflash */ -/*-----------------------------------------------------------------------------*/ -int write_dataflash(unsigned long addr_dest, unsigned int addr_src, - unsigned int size) -{ - unsigned int AddrToWrite = addr_dest; - AT91PS_DataFlash pFlash = &DataFlashInst; - - pFlash = AT91F_DataflashSelect(pFlash, &AddrToWrite); - if (AddrToWrite == -1) - return -1; - - return AT91F_DataFlashWrite(pFlash, (unsigned char *) addr_src, AddrToWrite, size); -} - -/*-----------------------------------------------------------------------------*/ -/* Function Name : erase_dataflash */ -/* Object : Erase entire dataflash */ -/*-----------------------------------------------------------------------------*/ -int erase_dataflash(unsigned long addr_dest) -{ - unsigned int AddrToWrite = addr_dest; - AT91PS_DataFlash pFlash = &DataFlashInst; - - pFlash = AT91F_DataflashSelect (pFlash, &AddrToWrite); - if (AddrToWrite == -1) - return -1; - - return AT91F_DataFlashErase(pFlash); -} - diff --git a/target/linux/at91-2.6/image/dfboot/src/dataflash.h b/target/linux/at91-2.6/image/dfboot/src/dataflash.h deleted file mode 100644 index 8fab63fa9e..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/dataflash.h +++ /dev/null @@ -1,181 +0,0 @@ -//*--------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*--------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*--------------------------------------------------------------------------- -//* File Name : AT91_SpiDataFlash.h -//* Object : Data Flash Atmel Description File -//* Translator : -//* -//* 1.0 03/04/01 HI : Creation -//* -//*--------------------------------------------------------------------------- - -#ifndef _DataFlash_h -#define _DataFlash_h - -/* Max value = 15Mhz to be compliant with the Continuous array read function */ -#ifdef SPI_LOW_SPEED -#define AT91C_SPI_CLK 14976000/4 -#else -#define AT91C_SPI_CLK 14976000 -#endif - -/* AC characteristics */ -/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */ - -#define DATAFLASH_TCSS (0xf << 16) /* 250ns 15/60000000 */ -#define DATAFLASH_TCHS (0x1 << 24) /* 250ns 32*1/60000000 */ - - -#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */ -#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */ - -#define CFG_MAX_DATAFLASH_BANKS 2 -#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 -#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 - -typedef struct { - unsigned long base; /* logical base address for a bank */ - unsigned long size; /* total bank size */ - unsigned long page_count; - unsigned long page_size; - unsigned long id; /* device id */ -} dataflash_info_t; - -typedef unsigned int AT91S_DataFlashStatus; - -/*----------------------------------------------------------------------*/ -/* DataFlash Structures */ -/*----------------------------------------------------------------------*/ - -/*---------------------------------------------*/ -/* DataFlash Descriptor Structure Definition */ -/*---------------------------------------------*/ -typedef struct _AT91S_DataflashDesc { - unsigned char *tx_cmd_pt; - unsigned int tx_cmd_size; - unsigned char *rx_cmd_pt; - unsigned int rx_cmd_size; - unsigned char *tx_data_pt; - unsigned int tx_data_size; - unsigned char *rx_data_pt; - unsigned int rx_data_size; - volatile unsigned char DataFlash_state; - unsigned char command[8]; -} AT91S_DataflashDesc, *AT91PS_DataflashDesc; - -/*---------------------------------------------*/ -/* DataFlash device definition structure */ -/*---------------------------------------------*/ -typedef struct _AT91S_Dataflash { - int pages_number; /* dataflash page number */ - int pages_size; /* dataflash page size */ - int page_offset; /* page offset in command */ - int byte_mask; /* byte mask in command */ - int cs; -} AT91S_DataflashFeatures, *AT91PS_DataflashFeatures; - - -/*---------------------------------------------*/ -/* DataFlash Structure Definition */ -/*---------------------------------------------*/ -typedef struct _AT91S_DataFlash { - AT91PS_DataflashDesc pDataFlashDesc; /* dataflash descriptor */ - AT91PS_DataflashFeatures pDevice; /* Pointer on a dataflash features array */ -} AT91S_DataFlash, *AT91PS_DataFlash; - - -typedef struct _AT91S_DATAFLASH_INFO { - - AT91S_DataflashDesc Desc; - AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */ - unsigned long logical_address; - unsigned int id; /* device id */ -} AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO; - - -/*-------------------------------------------------------------------------------------------------*/ - -#define AT45DB161 0x2c -#define AT45DB321 0x34 -#define AT45DB642 0x3c -#define AT45DB128 0x10 - -#define AT91C_DATAFLASH_TIMEOUT 20000 /* For AT91F_DataFlashWaitReady */ - -/* DataFlash return value */ -#define AT91C_DATAFLASH_BUSY 0x00 -#define AT91C_DATAFLASH_OK 0x01 -#define AT91C_DATAFLASH_ERROR 0x02 -#define AT91C_DATAFLASH_MEMORY_OVERFLOW 0x03 -#define AT91C_DATAFLASH_BAD_COMMAND 0x04 -#define AT91C_DATAFLASH_BAD_ADDRESS 0x05 - - -/* Driver State */ -#define IDLE 0x0 -#define BUSY 0x1 -#define ERROR 0x2 - -/* DataFlash Driver State */ -#define GET_STATUS 0x0F - -/*-------------------------------------------------------------------------------------------------*/ -/* Command Definition */ -/*-------------------------------------------------------------------------------------------------*/ - -/* READ COMMANDS */ -#define DB_CONTINUOUS_ARRAY_READ 0xE8 /* Continuous array read */ -#define DB_BURST_ARRAY_READ 0xE8 /* Burst array read */ -#define DB_PAGE_READ 0xD2 /* Main memory page read */ -#define DB_BUF1_READ 0xD4 /* Buffer 1 read */ -#define DB_BUF2_READ 0xD6 /* Buffer 2 read */ -#define DB_STATUS 0xD7 /* Status Register */ - -/* PROGRAM and ERASE COMMANDS */ -#define DB_BUF1_WRITE 0x84 /* Buffer 1 write */ -#define DB_BUF2_WRITE 0x87 /* Buffer 2 write */ -#define DB_BUF1_PAGE_ERASE_PGM 0x83 /* Buffer 1 to main memory page program with built-In erase */ -#define DB_BUF1_PAGE_ERASE_FASTPGM 0x93 /* Buffer 1 to main memory page program with built-In erase, Fast program */ -#define DB_BUF2_PAGE_ERASE_PGM 0x86 /* Buffer 2 to main memory page program with built-In erase */ -#define DB_BUF2_PAGE_ERASE_FASTPGM 0x96 /* Buffer 1 to main memory page program with built-In erase, Fast program */ -#define DB_BUF1_PAGE_PGM 0x88 /* Buffer 1 to main memory page program without built-In erase */ -#define DB_BUF1_PAGE_FASTPGM 0x98 /* Buffer 1 to main memory page program without built-In erase, Fast program */ -#define DB_BUF2_PAGE_PGM 0x89 /* Buffer 2 to main memory page program without built-In erase */ -#define DB_BUF2_PAGE_FASTPGM 0x99 /* Buffer 1 to main memory page program without built-In erase, Fast program */ -#define DB_PAGE_ERASE 0x81 /* Page Erase */ -#define DB_BLOCK_ERASE 0x50 /* Block Erase */ -#define DB_PAGE_PGM_BUF1 0x82 /* Main memory page through buffer 1 */ -#define DB_PAGE_FASTPGM_BUF1 0x92 /* Main memory page through buffer 1, Fast program */ -#define DB_PAGE_PGM_BUF2 0x85 /* Main memory page through buffer 2 */ -#define DB_PAGE_FastPGM_BUF2 0x95 /* Main memory page through buffer 2, Fast program */ - -/* ADDITIONAL COMMANDS */ -#define DB_PAGE_2_BUF1_TRF 0x53 /* Main memory page to buffer 1 transfert */ -#define DB_PAGE_2_BUF2_TRF 0x55 /* Main memory page to buffer 2 transfert */ -#define DB_PAGE_2_BUF1_CMP 0x60 /* Main memory page to buffer 1 compare */ -#define DB_PAGE_2_BUF2_CMP 0x61 /* Main memory page to buffer 2 compare */ -#define DB_AUTO_PAGE_PGM_BUF1 0x58 /* Auto page rewrite throught buffer 1 */ -#define DB_AUTO_PAGE_PGM_BUF2 0x59 /* Auto page rewrite throught buffer 2 */ - -/*-------------------------------------------------------------------------------------------------*/ - -extern AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; - -extern void AT91F_SpiInit(void); -extern int AT91F_DataflashProbe(int i, AT91PS_DataflashDesc pDesc); -extern int AT91F_DataFlashRead(AT91PS_DataFlash, unsigned long , unsigned long, char *); -extern AT91S_DataFlashStatus AT91F_DataFlashWrite(AT91PS_DataFlash ,unsigned char *, int, int); -extern AT91S_DataFlashStatus AT91F_DataFlashErase(AT91PS_DataFlash pDataFlash); -extern int AT91F_DataflashInit(void); -extern void AT91F_DataflashPrintInfo(void); -extern int read_dataflash(unsigned long addr, unsigned long size, char *result); -extern int write_dataflash(unsigned long addr_dest, unsigned int addr_src, unsigned int size); -extern int erase_dataflash(unsigned long addr_dest); - -#endif diff --git a/target/linux/at91-2.6/image/dfboot/src/div0.c b/target/linux/at91-2.6/image/dfboot/src/div0.c deleted file mode 100644 index d6fd90ec31..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/div0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* Replacement (=dummy) for GNU/Linux division-by zero handler */ -void __div0 (void) -{ - while(-1); -} diff --git a/target/linux/at91-2.6/image/dfboot/src/elf32-littlearm.lds b/target/linux/at91-2.6/image/dfboot/src/elf32-littlearm.lds deleted file mode 100644 index 4d4efb6ad8..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/elf32-littlearm.lds +++ /dev/null @@ -1,19 +0,0 @@ -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : { *(.text) } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .bss : { *(.bss) } -} \ No newline at end of file diff --git a/target/linux/at91-2.6/image/dfboot/src/embedded_services.h b/target/linux/at91-2.6/image/dfboot/src/embedded_services.h deleted file mode 100644 index 956b9edf06..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/embedded_services.h +++ /dev/null @@ -1,500 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : embedded_sevices.h -//* Object : Header File with all the embedded software services definitions -//* -//* 1.0 24 Jan 2003 FB : Creation -//*---------------------------------------------------------------------------- -#ifndef embedded_sevices_h -#define embedded_sevices_h - -#include "AT91RM9200.h" - -#define AT91C_BASE_ROM (char *)0x00100000 - -/* Return values */ -#define AT91C_BUFFER_SUCCESS 0 -#define AT91C_BUFFER_ERROR_SHIFT 16 -#define AT91C_BUFFER_ERROR (0x0F << AT91C_BUFFER_ERROR_SHIFT) - -#define AT91C_BUFFER_OVERFLOW (0x01 << AT91C_BUFFER_ERROR_SHIFT) -#define AT91C_BUFFER_UNDERRUN (0x02 << AT91C_BUFFER_ERROR_SHIFT) - -typedef unsigned int AT91S_BufferStatus; - -struct _AT91S_Pipe; - -// This structure is a virtual object of a buffer -typedef struct _AT91S_Buffer -{ - struct _AT91S_Pipe *pPipe; - void *pChild; - - // Functions invoked by the pipe - AT91S_BufferStatus (*SetRdBuffer) (struct _AT91S_Buffer *pSBuffer, char *pBuffer, unsigned int Size); - AT91S_BufferStatus (*SetWrBuffer) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer, unsigned int Size); - AT91S_BufferStatus (*RstRdBuffer) (struct _AT91S_Buffer *pSBuffer); - AT91S_BufferStatus (*RstWrBuffer) (struct _AT91S_Buffer *pSBuffer); - char (*MsgWritten) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer); - char (*MsgRead) (struct _AT91S_Buffer *pSBuffer, char const *pBuffer); - // Functions invoked by the peripheral - AT91S_BufferStatus (*GetWrBuffer) (struct _AT91S_Buffer *pSBuffer, char const **pData, unsigned int *pSize); - AT91S_BufferStatus (*GetRdBuffer) (struct _AT91S_Buffer *pSBuffer, char **pData, unsigned int *pSize); - AT91S_BufferStatus (*EmptyWrBuffer) (struct _AT91S_Buffer *pSBuffer, unsigned int size); - AT91S_BufferStatus (*FillRdBuffer) (struct _AT91S_Buffer *pSBuffer, unsigned int size); - char (*IsWrEmpty) (struct _AT91S_Buffer *pSBuffer); - char (*IsRdFull) (struct _AT91S_Buffer *pSBuffer); -} AT91S_Buffer, *AT91PS_Buffer; - -// =========================================================================================== -// SimpleBuffer definition -// -// This structure is pointed by pRealBuffer field in the SBuffer -// It contains usefull information for a real implementation of -// a SBuffer object. -// The application just create an instance of SSBUffer and SBuffer, -// call OpenSimpleBuffer, and continue using SBuffer instance - -typedef struct _AT91S_SBuffer -{ - AT91S_Buffer parent; - char *pRdBuffer; - char const *pWrBuffer; - unsigned int szRdBuffer; - unsigned int szWrBuffer; - unsigned int stRdBuffer; - unsigned int stWrBuffer; -} AT91S_SBuffer, *AT91PS_SBuffer; - -typedef AT91PS_Buffer (*AT91PF_OpenSBuffer) (AT91PS_SBuffer); - -// This function is called by the application -extern AT91PS_Buffer AT91F_OpenSBuffer(AT91PS_SBuffer pBuffer); - -// Functions invoked by the pipe -extern AT91S_BufferStatus AT91F_SbSetRdBuffer (AT91PS_Buffer pBuffer, char *pData, unsigned int Size); -extern AT91S_BufferStatus AT91F_SbSetWrBuffer (AT91PS_Buffer pBuffer, char const *pData, unsigned int Size); -extern AT91S_BufferStatus AT91F_SbRstRdBuffer (AT91PS_Buffer pBuffer); -extern AT91S_BufferStatus AT91F_SbRstWrBuffer (AT91PS_Buffer pBuffer); -extern char AT91F_SbMsgWritten (AT91PS_Buffer pBuffer, char const *pMsg); -extern char AT91F_SbMsgRead (AT91PS_Buffer pBuffer, char const *pMsg); -// Functions invoked by the peripheral -extern AT91S_BufferStatus AT91F_SbGetWrBuffer (AT91PS_Buffer pBuffer, char const **pData, unsigned int *pSize); -extern AT91S_BufferStatus AT91F_SbGetRdBuffer (AT91PS_Buffer pBuffer, char **pData, unsigned int *pSize); -extern AT91S_BufferStatus AT91F_SbEmptyWrBuffer(AT91PS_Buffer pBuffer, unsigned int size); -extern AT91S_BufferStatus AT91F_SbFillRdBuffer (AT91PS_Buffer pBuffer, unsigned int size); -extern char AT91F_SbIsWrEmpty (AT91PS_Buffer pBuffer); -extern char AT91F_SbIsRdFull (AT91PS_Buffer pBuffer); - -#ifdef DBG_DRV_BUFFER -extern char const *AT91F_SbGetError(AT91S_BufferStatus errorNumber); -#endif - - -#define AT91C_OPEN_CTRLTEMPO_SUCCESS 0 -#define AT91C_ERROR_OPEN_CTRLTEMPO 1 -#define AT91C_START_OK 2 -#define AT91C_STOP_OK 3 -#define AT91C_TIMEOUT_REACHED 4 - -typedef enum _AT91E_SvcTempo { - AT91E_SVCTEMPO_DIS, - AT91E_SVCTEMPO_EN -} AT91E_SvcTempo; - -typedef unsigned int AT91S_TempoStatus; - -// AT91S_SvcTempo -typedef struct _AT91S_SvcTempo -{ - - // Methods: - AT91S_TempoStatus (*Start) ( - struct _AT91S_SvcTempo *pSvc, - unsigned int timeout, - unsigned int reload, - void (*callback) (AT91S_TempoStatus, void *), - void *pData); - AT91S_TempoStatus (*Stop) (struct _AT91S_SvcTempo *pSvc); - - struct _AT91S_SvcTempo *pPreviousTempo; - struct _AT91S_SvcTempo *pNextTempo; - - // Data - unsigned int TickTempo; //* timeout value - unsigned int ReloadTempo;//* Reload value for periodic execution - void (*TempoCallback)(AT91S_TempoStatus, void *); - void *pPrivateData; - AT91E_SvcTempo flag; -} AT91S_SvcTempo, *AT91PS_SvcTempo; - - -// AT91S_CtrlTempo -typedef struct _AT91S_CtlTempo -{ - // Members: - - // Start and stop for Timer hardware - AT91S_TempoStatus (*CtlTempoStart) (void *pTimer); - AT91S_TempoStatus (*CtlTempoStop) (void *pTimer); - - // Start and stop for Tempo service - AT91S_TempoStatus (*SvcTempoStart) ( - struct _AT91S_SvcTempo *pSvc, - unsigned int timeout, - unsigned int reload, - void (*callback) (AT91S_TempoStatus, void *), - void *pData); - AT91S_TempoStatus (*SvcTempoStop) (struct _AT91S_SvcTempo *pSvc); - AT91S_TempoStatus (*CtlTempoSetTime)(struct _AT91S_CtlTempo *pCtrl, unsigned int NewTime); - AT91S_TempoStatus (*CtlTempoGetTime)(struct _AT91S_CtlTempo *pCtrl); - AT91S_TempoStatus (*CtlTempoIsStart)(struct _AT91S_CtlTempo *pCtrl); - AT91S_TempoStatus (*CtlTempoCreate) ( - struct _AT91S_CtlTempo *pCtrl, - struct _AT91S_SvcTempo *pTempo); - AT91S_TempoStatus (*CtlTempoRemove) ( - struct _AT91S_CtlTempo *pCtrl, - struct _AT91S_SvcTempo *pTempo); - AT91S_TempoStatus (*CtlTempoTick) (struct _AT91S_CtlTempo *pCtrl); - - // Data: - - void *pPrivateData; // Pointer to devived class - void const *pTimer; // hardware - AT91PS_SvcTempo pFirstTempo; - AT91PS_SvcTempo pNewTempo; -} AT91S_CtlTempo, *AT91PS_CtlTempo; -typedef AT91S_TempoStatus (*AT91PF_OpenCtlTempo) ( AT91PS_CtlTempo, void const *); - -// This function is called by the application. -extern AT91S_TempoStatus AT91F_OpenCtlTempo( AT91PS_CtlTempo pCtrlTempo, void const *pTempoTimer ); - -extern AT91S_TempoStatus AT91F_STStart (void *); -extern AT91S_TempoStatus AT91F_STStop (void *); -extern AT91S_TempoStatus AT91F_STSetTime (AT91PS_CtlTempo, unsigned int); -extern AT91S_TempoStatus AT91F_STGetTime (AT91PS_CtlTempo); -extern AT91S_TempoStatus AT91F_STIsStart (AT91PS_CtlTempo); -extern AT91S_TempoStatus AT91F_CtlTempoCreate (AT91PS_CtlTempo, AT91PS_SvcTempo); -extern AT91S_TempoStatus AT91F_CtlTempoRemove (AT91PS_CtlTempo, AT91PS_SvcTempo); -extern AT91S_TempoStatus AT91F_CtlTempoTick (AT91PS_CtlTempo); -extern AT91S_TempoStatus AT91F_SvcTempoStart ( - AT91PS_SvcTempo pSvc, - unsigned int timeout, - unsigned int reload, - void (*callback) (AT91S_TempoStatus, void *), - void *pData); -extern AT91S_TempoStatus AT91F_SvcTempoStop (AT91PS_SvcTempo); - - -// Following types are defined in another header files -struct _AT91S_Buffer; - -// Constants: -#define AT91C_COMMSVC_SUCCESS 0 -#define AT91C_COMMSVC_ERROR_SHIFT 8 -#define AT91C_COMMSVC_ERROR (0x0f << AT91C_COMMSVC_ERROR_SHIFT) - -typedef unsigned int AT91S_SvcCommStatus; - -// AT91S_Service definition -// This structure is an abstraction of a communication peripheral -typedef struct _AT91S_Service -{ - // Methods: - AT91S_SvcCommStatus (*Reset) (struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StartTx)(struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StartRx)(struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StopTx) (struct _AT91S_Service *pService); - AT91S_SvcCommStatus (*StopRx) (struct _AT91S_Service *pService); - char (*TxReady)(struct _AT91S_Service *pService); - char (*RxReady)(struct _AT91S_Service *pService); - // Data: - struct _AT91S_Buffer *pBuffer; // Link to a buffer object - void *pChild; -} AT91S_SvcComm, *AT91PS_SvcComm; - -// Constants: -#define AT91C_XMODEM_SOH 0x01 /* Start of Heading for 128 bytes */ -#define AT91C_XMODEM_STX 0x02 /* Start of heading for 1024 bytes */ -#define AT91C_XMODEM_EOT 0x04 /* End of transmission */ -#define AT91C_XMODEM_ACK 0x06 /* Acknowledge */ -#define AT91C_XMODEM_NAK 0x15 /* Negative Acknowledge */ -#define AT91C_XMODEM_CRCCHR 'C' - -#define AT91C_XMODEM_PACKET_SIZE 2 // packet + packetCRC -#define AT91C_XMODEM_CRC_SIZE 2 // crcLSB + crcMSB -#define AT91C_XMODEM_DATA_SIZE_SOH 128 // data 128 corresponding to SOH header -#define AT91C_XMODEM_DATA_SIZE_STX 1024 // data 1024 corresponding to STX header - -//* Following structure is used by SPipe to refer to the USB device peripheral endpoint -typedef struct _AT91PS_SvcXmodem { - - // Public Methods: - AT91S_SvcCommStatus (*Handler) (struct _AT91PS_SvcXmodem *, unsigned int); - AT91S_SvcCommStatus (*StartTx) (struct _AT91PS_SvcXmodem *, unsigned int); - AT91S_SvcCommStatus (*StopTx) (struct _AT91PS_SvcXmodem *, unsigned int); - - // Private Methods: - AT91S_SvcCommStatus (*ReadHandler) (struct _AT91PS_SvcXmodem *, unsigned int csr); - AT91S_SvcCommStatus (*WriteHandler) (struct _AT91PS_SvcXmodem *, unsigned int csr); - unsigned short (*GetCrc) (char *ptr, unsigned int count); - char (*CheckHeader) (unsigned char currentPacket, char *packet); - char (*CheckData) (struct _AT91PS_SvcXmodem *); - - AT91S_SvcComm parent; // Base class - AT91PS_USART pUsart; - - AT91S_SvcTempo tempo; // Link to a AT91S_Tempo object - - char *pData; - unsigned int dataSize; // = XMODEM_DATA_STX or XMODEM_DATA_SOH - char packetDesc[AT91C_XMODEM_PACKET_SIZE]; - unsigned char packetId; // Current packet - char packetStatus; - char isPacketDesc; - char eot; // end of transmition -} AT91S_SvcXmodem, *AT91PS_SvcXmodem; - -typedef AT91PS_SvcComm (*AT91PF_OpenSvcXmodem) ( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo); - -// This function is called by the application. -extern AT91PS_SvcComm AT91F_OpenSvcXmodem( AT91PS_SvcXmodem, AT91PS_USART, AT91PS_CtlTempo); - -extern unsigned short AT91F_SvcXmodemGetCrc (char *ptr, unsigned int count); -extern char AT91F_SvcXmodemCheckHeader(unsigned char currentPacket, char *packet); -extern char AT91F_SvcXmodemCheckData (AT91PS_SvcXmodem pSvcXmodem); -extern AT91S_SvcCommStatus AT91F_SvcXmodemReadHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr); -extern AT91S_SvcCommStatus AT91F_SvcXmodemWriteHandler(AT91PS_SvcXmodem pSvcXmodem, unsigned int csr); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStartTx(AT91PS_SvcComm pSvcComm); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStopTx(AT91PS_SvcComm pSvcComm); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStartRx(AT91PS_SvcComm pSvcComm); -extern AT91S_SvcCommStatus AT91F_SvcXmodemStopRx(AT91PS_SvcComm pSvcComm); -extern char AT91F_SvcXmodemTxReady(AT91PS_SvcComm pService); -extern char AT91F_SvcXmodemRxReady(AT91PS_SvcComm pSvcComm); - - -// Constants: -#define AT91C_PIPE_SUCCESS 0 -#define AT91C_PIPE_ERROR_SHIFT 8 -#define AT91C_PIPE_ERROR (0x0F << AT91C_PIPE_ERROR_SHIFT) - -#define AT91C_PIPE_OPEN_FAILED (1 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_WRITE_FAILED (2 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_WRITE_ABORTED (3 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_READ_FAILED (4 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_READ_ABORTED (5 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_ABORT_FAILED (6 << AT91C_PIPE_ERROR_SHIFT) -#define AT91C_PIPE_RESET_FAILED (7 << AT91C_PIPE_ERROR_SHIFT) - -/* _AT91S_Pipe stucture */ -typedef unsigned int AT91S_PipeStatus; - -typedef struct _AT91S_Pipe -{ - // A pipe is linked with a peripheral and a buffer - AT91PS_SvcComm pSvcComm; - AT91PS_Buffer pBuffer; - - // Callback functions with their arguments - void (*WriteCallback) (AT91S_PipeStatus, void *); - void (*ReadCallback) (AT91S_PipeStatus, void *); - void *pPrivateReadData; - void *pPrivateWriteData; - - // Pipe methods - AT91S_PipeStatus (*Write) ( - struct _AT91S_Pipe *pPipe, - char const * pData, - unsigned int size, - void (*callback) (AT91S_PipeStatus, void *), - void *privateData); - AT91S_PipeStatus (*Read) ( - struct _AT91S_Pipe *pPipe, - char *pData, - unsigned int size, - void (*callback) (AT91S_PipeStatus, void *), - void *privateData); - AT91S_PipeStatus (*AbortWrite) ( - struct _AT91S_Pipe *pPipe); - AT91S_PipeStatus (*AbortRead) ( - struct _AT91S_Pipe *pPipe); - AT91S_PipeStatus (*Reset) ( - struct _AT91S_Pipe *pPipe); - char (*IsWritten) ( - struct _AT91S_Pipe *pPipe, - char const *pVoid); - char (*IsReceived) ( - struct _AT91S_Pipe *pPipe, - char const *pVoid); -} AT91S_Pipe, *AT91PS_Pipe; - -// types used in AT91S_Pipe -typedef AT91PS_Pipe (*AT91PF_OpenPipe) (AT91PS_Pipe, AT91PS_SvcComm, AT91PS_Buffer); -typedef void (*AT91PF_PipeWriteCallBack) (AT91S_PipeStatus, void *); -typedef void (*AT91PF_PipeReadCallBack) (AT91S_PipeStatus, void *); -typedef AT91S_PipeStatus (*AT91PF_PipeWrite) (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *), void *); -typedef AT91S_PipeStatus (*AT91PF_PipeRead) (AT91PS_Pipe, char const *, unsigned int, void (*) (AT91S_PipeStatus, void *), void *); -typedef AT91S_PipeStatus (*AT91PF_PipeAbortWrite) (AT91PS_Pipe); -typedef AT91S_PipeStatus (*AT91PF_PipeAbortRead) (AT91PS_Pipe); -typedef AT91S_PipeStatus (*AT91PF_PipeReset) (AT91PS_Pipe); -typedef char (*AT91PF_PipeIsWritten) (AT91PS_Pipe, char const *); -typedef char (*AT91PF_PipeIsReceived) (AT91PS_Pipe, char const *); - -// This function is called by the application -extern AT91PS_Pipe AT91F_OpenPipe( - AT91PS_Pipe pPipe, - AT91PS_SvcComm pSvcComm, - AT91PS_Buffer pBuffer); - -// Following functions are called through AT91S_Pipe pointers - -extern AT91S_PipeStatus AT91F_PipeWrite( - AT91PS_Pipe pPipe, - char const *pVoid, - unsigned int size, - AT91PF_PipeWriteCallBack callback, - void *privateData); -extern AT91S_PipeStatus AT91F_PipeRead( - AT91PS_Pipe pPipe, - char *pVoid, - unsigned int Size, - AT91PF_PipeReadCallBack callback, - void *privateData); -extern AT91S_PipeStatus AT91F_PipeAbortWrite(AT91PS_Pipe pPipe); -extern AT91S_PipeStatus AT91F_PipeAbortRead(AT91PS_Pipe pPipe); -extern AT91S_PipeStatus AT91F_PipeReset(AT91PS_Pipe pPipe); -extern char AT91F_PipeMsgWritten(AT91PS_Pipe pPipe, char const *pVoid); -extern char AT91F_PipeMsgReceived(AT91PS_Pipe pPipe, char const *pVoid); - -#ifdef DBG_DRV_PIPE -// This function parse the error number and return a string -// describing the error message -extern char const *AT91F_PipeGetError(AT91S_PipeStatus msgId); -#endif - -extern const unsigned char bit_rev[256]; - -extern void CalculateCrc32(const unsigned char *,unsigned int, unsigned int *); -extern void CalculateCrc16(const unsigned char *, unsigned int , unsigned short *); -extern void CalculateCrcHdlc(const unsigned char *, unsigned int, unsigned short *); -extern void CalculateCrc16ccitt(const unsigned char *, unsigned int , unsigned short *); - -typedef const unsigned char* AT91PS_SVC_CRC_BIT_REV ; - -typedef void (*AT91PF_SVC_CRC32) (const unsigned char *, unsigned int, unsigned int *); -typedef void (*AT91PF_SVC_CRC16) (const unsigned char *, unsigned int, unsigned short *); -typedef void (*AT91PF_SVC_CRCHDLC) (const unsigned char *, unsigned int, unsigned short *); -typedef void (*AT91PF_SVC_CRCCCITT)(const unsigned char *, unsigned int , unsigned short *); - - -typedef short (*AT91PF_Sinus) (int angle); -typedef const short * AT91PS_SINE_TAB; - -extern short AT91F_Sinus(int angle); -extern const short AT91C_SINUS180_TAB[256]; - - -typedef void (TypeAICHandler) (void) ; - - -// ROM BOOT Structure Element Definition (liv v2) -typedef struct _AT91S_MEMCDesc -{ - AT91PS_MC memc_base ; /* Peripheral base */ - unsigned char periph_id ; /* MC Peripheral Identifier */ -} AT91S_MEMCDesc, *AT91PS_MEMCDesc ; - -typedef struct _AT91S_Pio2Desc -{ - AT91PS_PIO pio_base ; /* Base Address */ - unsigned char periph_id ; /* Peripheral Identifier */ - unsigned char pio_number ; /* Total Pin Number */ -} AT91S_Pio2Desc, *AT91PS_Pio2Desc ; - -typedef struct _AT91S_SPIDesc -{ - AT91PS_SPI spi_base ; - const AT91PS_PIO pio_base ; - unsigned char periph_id ; - unsigned char pin_spck ; - unsigned char pin_miso ; - unsigned char pin_mosi ; - unsigned char pin_npcs[4] ; -} AT91S_SPIDesc, *AT91PS_SPIDesc ; - -typedef struct _AT91S_USART2Desc -{ - AT91PS_USART usart_base ; /* Peripheral base */ - const AT91PS_PIO pio_base ; /* IO controller descriptor */ - unsigned int pin_rxd ; /* RXD pin number in the PIO */ - unsigned int pin_txd ; /* TXD pin number in the PIO */ - unsigned int pin_sck ; /* SCK pin number in the PIO */ - unsigned int pin_rts ; /* RTS pin number in the PIO */ - unsigned int pin_cts ; /* CTS pin number in the PIO */ - unsigned int pin_dtr ; /* DTR pin number in the PIO */ - unsigned int pin_ri ; /* RI pin number in the PIO */ - unsigned int pin_dsr ; /* DSR pin number in the PIO */ - unsigned int pin_dcd ; /* DCD pin number in the PIO */ - unsigned int periph_id ; /* USART Peripheral Identifier */ -} AT91S_USART2Desc, *AT91PS_USART2Desc ; - -typedef struct _AT91S_TWIDesc -{ - AT91PS_TWI TWI_base ; - const AT91PS_PIO pio_base ; - unsigned int pin_sck ; - unsigned int pin_sda ; - unsigned int periph_id; -}AT91S_TWIDesc, *AT91PS_TWIDesc; - -typedef struct _AT91S_STDesc -{ - AT91PS_ST st_base ; /* Peripheral base address */ - TypeAICHandler *AsmSTHandler ; /* Assembly interrupt handler */ - unsigned char PeriphId ; /* Peripheral Identifier */ -} AT91S_STDesc, *AT91PS_STDesc; - -typedef struct _AT91S_RomBoot { - const unsigned int version; - // Peripheral descriptors - const AT91S_MEMCDesc MEMC_DESC; - const AT91S_STDesc SYSTIMER_DESC; - const AT91S_Pio2Desc PIOA_DESC; - const AT91S_Pio2Desc PIOB_DESC; - const AT91S_USART2Desc DBGU_DESC; - const AT91S_USART2Desc USART0_DESC; - const AT91S_USART2Desc USART1_DESC; - const AT91S_USART2Desc USART2_DESC; - const AT91S_USART2Desc USART3_DESC; - const AT91S_TWIDesc TWI_DESC; - const AT91S_SPIDesc SPI_DESC; - - // Objects entry - const AT91PF_OpenPipe OpenPipe; - const AT91PF_OpenSBuffer OpenSBuffer; - const unsigned int reserved1; - const AT91PF_OpenSvcXmodem OpenSvcXmodem; - const AT91PF_OpenCtlTempo OpenCtlTempo; - const unsigned int reserved2; - const unsigned int reserved3; - const unsigned int reserved4; - const AT91PF_SVC_CRC16 CRC16; - const AT91PF_SVC_CRCCCITT CRCCCITT; - const AT91PF_SVC_CRCHDLC CRCHDLC; - const AT91PF_SVC_CRC32 CRC32; - const AT91PS_SVC_CRC_BIT_REV Bit_Reverse_Array; - const AT91PS_SINE_TAB SineTab; - const AT91PF_Sinus Sine; -} AT91S_RomBoot, *AT91PS_RomBoot; - -#define AT91C_ROM_BOOT_ADDRESS ((const AT91S_RomBoot *) ( *((unsigned int *) (AT91C_BASE_ROM + 0x20))) ) - -#endif - diff --git a/target/linux/at91-2.6/image/dfboot/src/include/AT91C_MCI_Device.h b/target/linux/at91-2.6/image/dfboot/src/include/AT91C_MCI_Device.h deleted file mode 100644 index 43d5835234..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/include/AT91C_MCI_Device.h +++ /dev/null @@ -1,379 +0,0 @@ -//*--------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*--------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*--------------------------------------------------------------------------- -//* File Name : AT91C_MCI_Device.h -//* Object : Data Flash Atmel Description File -//* Translator : -//* -//* 1.0 26/11/02 FB : Creation -//*--------------------------------------------------------------------------- - -#ifndef AT91C_MCI_Device_h -#define AT91C_MCI_Device_h - -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" - -typedef unsigned int AT91S_MCIDeviceStatus; - -///////////////////////////////////////////////////////////////////////////////////////////////////// - -#define AT91C_CARD_REMOVED 0 -#define AT91C_MMC_CARD_INSERTED 1 -#define AT91C_SD_CARD_INSERTED 2 - -#define AT91C_NO_ARGUMENT 0x0 - -#define AT91C_FIRST_RCA 0xCAFE -#define AT91C_MAX_MCI_CARDS 10 - -#define AT91C_BUS_WIDTH_1BIT 0x00 -#define AT91C_BUS_WIDTH_4BITS 0x02 - -/* Driver State */ -#define AT91C_MCI_IDLE 0x0 -#define AT91C_MCI_TIMEOUT_ERROR 0x1 -#define AT91C_MCI_RX_SINGLE_BLOCK 0x2 -#define AT91C_MCI_RX_MULTIPLE_BLOCK 0x3 -#define AT91C_MCI_RX_STREAM 0x4 -#define AT91C_MCI_TX_SINGLE_BLOCK 0x5 -#define AT91C_MCI_TX_MULTIPLE_BLOCK 0x6 -#define AT91C_MCI_TX_STREAM 0x7 - -/* TimeOut */ -#define AT91C_TIMEOUT_CMDRDY 30 - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MMC & SDCard Structures -///////////////////////////////////////////////////////////////////////////////////////////////////// - -/*-----------------------------------------------*/ -/* SDCard Device Descriptor Structure Definition */ -/*-----------------------------------------------*/ -typedef struct _AT91S_MciDeviceDesc -{ - volatile unsigned char state; - unsigned char SDCard_bus_width; - -} AT91S_MciDeviceDesc, *AT91PS_MciDeviceDesc; - -/*---------------------------------------------*/ -/* MMC & SDCard Structure Device Features */ -/*---------------------------------------------*/ -typedef struct _AT91S_MciDeviceFeatures -{ - unsigned char Card_Inserted; // (0=AT91C_CARD_REMOVED) (1=AT91C_MMC_CARD_INSERTED) (2=AT91C_SD_CARD_INSERTED) - unsigned int Relative_Card_Address; // RCA - unsigned int Max_Read_DataBlock_Length; // 2^(READ_BL_LEN) in CSD - unsigned int Max_Write_DataBlock_Length; // 2^(WRITE_BL_LEN) in CSD - unsigned char Read_Partial; // READ_BL_PARTIAL - unsigned char Write_Partial; // WRITE_BL_PARTIAL - unsigned char Erase_Block_Enable; // ERASE_BLK_EN - unsigned char Read_Block_Misalignment; // READ_BLK_MISALIGN - unsigned char Write_Block_Misalignment; // WRITE_BLK_MISALIGN - unsigned char Sector_Size; // SECTOR_SIZE - unsigned int Memory_Capacity; // Size in bits of the device - -} AT91S_MciDeviceFeatures, *AT91PS_MciDeviceFeatures ; - -/*---------------------------------------------*/ -/* MCI Device Structure Definition */ -/*---------------------------------------------*/ -typedef struct _AT91S_MciDevice -{ - AT91PS_MciDeviceDesc pMCI_DeviceDesc; // MCI device descriptor - AT91PS_MciDeviceFeatures pMCI_DeviceFeatures;// Pointer on a MCI device features array -}AT91S_MciDevice, *AT91PS_MciDevice; - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MCI_CMD Register Value -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_POWER_ON_INIT (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_INIT | AT91C_MCI_OPDCMD) - -///////////////////////////////////////////////////////////////// -// Class 0 & 1 commands: Basic commands and Read Stream commands -///////////////////////////////////////////////////////////////// - -#define AT91C_GO_IDLE_STATE_CMD (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE ) -#define AT91C_MMC_GO_IDLE_STATE_CMD (0 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_OPDCMD) -#define AT91C_MMC_SEND_OP_COND_CMD (1 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_OPDCMD) -#define AT91C_ALL_SEND_CID_CMD (2 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 ) -#define AT91C_MMC_ALL_SEND_CID_CMD (2 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_OPDCMD) -#define AT91C_SET_RELATIVE_ADDR_CMD (3 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_MMC_SET_RELATIVE_ADDR_CMD (3 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT | AT91C_MCI_OPDCMD) - -#define AT91C_SET_DSR_CMD (4 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_NO | AT91C_MCI_MAXLAT ) // no tested - -#define AT91C_SEL_DESEL_CARD_CMD (7 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_SEND_CSD_CMD (9 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_MAXLAT ) -#define AT91C_SEND_CID_CMD (10 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_136 | AT91C_MCI_MAXLAT ) -#define AT91C_MMC_READ_DAT_UNTIL_STOP_CMD (11 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRDIR | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT ) - -#define AT91C_STOP_TRANSMISSION_CMD (12 | AT91C_MCI_TRCMD_STOP | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_STOP_TRANSMISSION_SYNC_CMD (12 | AT91C_MCI_TRCMD_STOP | AT91C_MCI_SPCMD_SYNC | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_SEND_STATUS_CMD (13 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_GO_INACTIVE_STATE_CMD (15 | AT91C_MCI_RSPTYP_NO ) - -//*------------------------------------------------ -//* Class 2 commands: Block oriented Read commands -//*------------------------------------------------ - -#define AT91C_SET_BLOCKLEN_CMD (16 | AT91C_MCI_TRCMD_NO | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT ) -#define AT91C_READ_SINGLE_BLOCK_CMD (17 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | AT91C_MCI_TRTYP_BLOCK | AT91C_MCI_TRDIR | AT91C_MCI_MAXLAT) -#define AT91C_READ_MULTIPLE_BLOCK_CMD (18 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | AT91C_MCI_TRTYP_MULTIPLE | AT91C_MCI_TRDIR | AT91C_MCI_MAXLAT) - -//*-------------------------------------------- -//* Class 3 commands: Sequential write commands -//*-------------------------------------------- - -#define AT91C_MMC_WRITE_DAT_UNTIL_STOP_CMD (20 | AT91C_MCI_TRTYP_STREAM| AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 & ~(AT91C_MCI_TRDIR) | AT91C_MCI_TRCMD_START | AT91C_MCI_MAXLAT ) // MMC - -//*------------------------------------------------ -//* Class 4 commands: Block oriented write commands -//*------------------------------------------------ - -#define AT91C_WRITE_BLOCK_CMD (24 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | (AT91C_MCI_TRTYP_BLOCK & ~(AT91C_MCI_TRDIR)) | AT91C_MCI_MAXLAT) -#define AT91C_WRITE_MULTIPLE_BLOCK_CMD (25 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_START | (AT91C_MCI_TRTYP_MULTIPLE & ~(AT91C_MCI_TRDIR)) | AT91C_MCI_MAXLAT) -#define AT91C_PROGRAM_CSD_CMD (27 | AT91C_MCI_RSPTYP_48 ) - - -//*---------------------------------------- -//* Class 6 commands: Group Write protect -//*---------------------------------------- - -#define AT91C_SET_WRITE_PROT_CMD (28 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_CLR_WRITE_PROT_CMD (29 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_SEND_WRITE_PROT_CMD (30 | AT91C_MCI_RSPTYP_48 ) - - -//*---------------------------------------- -//* Class 5 commands: Erase commands -//*---------------------------------------- - -#define AT91C_TAG_SECTOR_START_CMD (32 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_TAG_SECTOR_END_CMD (33 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_MMC_UNTAG_SECTOR_CMD (34 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_MMC_TAG_ERASE_GROUP_START_CMD (35 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_MMC_TAG_ERASE_GROUP_END_CMD (36 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_MMC_UNTAG_ERASE_GROUP_CMD (37 | AT91C_MCI_RSPTYP_48 ) -#define AT91C_ERASE_CMD (38 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT ) - -//*---------------------------------------- -//* Class 7 commands: Lock commands -//*---------------------------------------- - -#define AT91C_LOCK_UNLOCK (42 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) // no tested - -//*----------------------------------------------- -// Class 8 commands: Application specific commands -//*----------------------------------------------- - -#define AT91C_APP_CMD (55 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_GEN_CMD (56 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) // no tested - -#define AT91C_SDCARD_SET_BUS_WIDTH_CMD (6 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_STATUS_CMD (13 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD (22 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD (23 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_APP_OP_COND_CMD (41 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO ) -#define AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD (42 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) -#define AT91C_SDCARD_SEND_SCR_CMD (51 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) - -#define AT91C_SDCARD_APP_ALL_CMD (AT91C_SDCARD_SET_BUS_WIDTH_CMD +\ - AT91C_SDCARD_STATUS_CMD +\ - AT91C_SDCARD_SEND_NUM_WR_BLOCKS_CMD +\ - AT91C_SDCARD_SET_WR_BLK_ERASE_COUNT_CMD +\ - AT91C_SDCARD_APP_OP_COND_CMD +\ - AT91C_SDCARD_SET_CLR_CARD_DETECT_CMD +\ - AT91C_SDCARD_SEND_SCR_CMD) - -//*---------------------------------------- -//* Class 9 commands: IO Mode commands -//*---------------------------------------- - -#define AT91C_MMC_FAST_IO_CMD (39 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_MAXLAT) -#define AT91C_MMC_GO_IRQ_STATE_CMD (40 | AT91C_MCI_SPCMD_NONE | AT91C_MCI_RSPTYP_48 | AT91C_MCI_TRCMD_NO | AT91C_MCI_MAXLAT) - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// Functions returnals -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_CMD_SEND_OK 0 // Command ok -#define AT91C_CMD_SEND_ERROR -1 // Command failed -#define AT91C_INIT_OK 2 // Init Successfull -#define AT91C_INIT_ERROR 3 // Init Failed -#define AT91C_READ_OK 4 // Read Successfull -#define AT91C_READ_ERROR 5 // Read Failed -#define AT91C_WRITE_OK 6 // Write Successfull -#define AT91C_WRITE_ERROR 7 // Write Failed -#define AT91C_ERASE_OK 8 // Erase Successfull -#define AT91C_ERASE_ERROR 9 // Erase Failed -#define AT91C_CARD_SELECTED_OK 10 // Card Selection Successfull -#define AT91C_CARD_SELECTED_ERROR 11 // Card Selection Failed - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MCI_SR Errors -///////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_MCI_SR_ERROR (AT91C_MCI_UNRE |\ - AT91C_MCI_OVRE |\ - AT91C_MCI_DTOE |\ - AT91C_MCI_DCRCE |\ - AT91C_MCI_RTOE |\ - AT91C_MCI_RENDE |\ - AT91C_MCI_RCRCE |\ - AT91C_MCI_RDIRE |\ - AT91C_MCI_RINDE) - -//////////////////////////////////////////////////////////////////////////////////////////////////// -// OCR Register -//////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_VDD_16_17 (1 << 4) -#define AT91C_VDD_17_18 (1 << 5) -#define AT91C_VDD_18_19 (1 << 6) -#define AT91C_VDD_19_20 (1 << 7) -#define AT91C_VDD_20_21 (1 << 8) -#define AT91C_VDD_21_22 (1 << 9) -#define AT91C_VDD_22_23 (1 << 10) -#define AT91C_VDD_23_24 (1 << 11) -#define AT91C_VDD_24_25 (1 << 12) -#define AT91C_VDD_25_26 (1 << 13) -#define AT91C_VDD_26_27 (1 << 14) -#define AT91C_VDD_27_28 (1 << 15) -#define AT91C_VDD_28_29 (1 << 16) -#define AT91C_VDD_29_30 (1 << 17) -#define AT91C_VDD_30_31 (1 << 18) -#define AT91C_VDD_31_32 (1 << 19) -#define AT91C_VDD_32_33 (1 << 20) -#define AT91C_VDD_33_34 (1 << 21) -#define AT91C_VDD_34_35 (1 << 22) -#define AT91C_VDD_35_36 (1 << 23) -#define AT91C_CARD_POWER_UP_BUSY (1 << 31) - -#define AT91C_MMC_HOST_VOLTAGE_RANGE (AT91C_VDD_27_28 +\ - AT91C_VDD_28_29 +\ - AT91C_VDD_29_30 +\ - AT91C_VDD_30_31 +\ - AT91C_VDD_31_32 +\ - AT91C_VDD_32_33) - -//////////////////////////////////////////////////////////////////////////////////////////////////// -// CURRENT_STATE & READY_FOR_DATA in SDCard Status Register definition (response type R1) -//////////////////////////////////////////////////////////////////////////////////////////////////// -#define AT91C_SR_READY_FOR_DATA (1 << 8) // corresponds to buffer empty signalling on the bus -#define AT91C_SR_IDLE (0 << 9) -#define AT91C_SR_READY (1 << 9) -#define AT91C_SR_IDENT (2 << 9) -#define AT91C_SR_STBY (3 << 9) -#define AT91C_SR_TRAN (4 << 9) -#define AT91C_SR_DATA (5 << 9) -#define AT91C_SR_RCV (6 << 9) -#define AT91C_SR_PRG (7 << 9) -#define AT91C_SR_DIS (8 << 9) - -#define AT91C_SR_CARD_SELECTED (AT91C_SR_READY_FOR_DATA + AT91C_SR_TRAN) - -///////////////////////////////////////////////////////////////////////////////////////////////////// -// MMC CSD register header File -// AT91C_CSD_xxx_S for shift value -// AT91C_CSD_xxx_M for mask value -///////////////////////////////////////////////////////////////////////////////////////////////////// - -// First Response INT <=> CSD[3] : bits 0 to 31 -#define AT91C_CSD_BIT0_S 0 // [0:0] -#define AT91C_CSD_BIT0_M 0x01 -#define AT91C_CSD_CRC_S 1 // [7:1] -#define AT91C_CSD_CRC_M 0x7F -#define AT91C_CSD_MMC_ECC_S 8 // [9:8] reserved for MMC compatibility -#define AT91C_CSD_MMC_ECC_M 0x03 -#define AT91C_CSD_FILE_FMT_S 10 // [11:10] -#define AT91C_CSD_FILE_FMT_M 0x03 -#define AT91C_CSD_TMP_WP_S 12 // [12:12] -#define AT91C_CSD_TMP_WP_M 0x01 -#define AT91C_CSD_PERM_WP_S 13 // [13:13] -#define AT91C_CSD_PERM_WP_M 0x01 -#define AT91C_CSD_COPY_S 14 // [14:14] -#define AT91C_CSD_COPY_M 0x01 -#define AT91C_CSD_FILE_FMT_GRP_S 15 // [15:15] -#define AT91C_CSD_FILE_FMT_GRP_M 0x01 -// reserved 16 // [20:16] -// reserved 0x1F -#define AT91C_CSD_WBLOCK_P_S 21 // [21:21] -#define AT91C_CSD_WBLOCK_P_M 0x01 -#define AT91C_CSD_WBLEN_S 22 // [25:22] -#define AT91C_CSD_WBLEN_M 0x0F -#define AT91C_CSD_R2W_F_S 26 // [28:26] -#define AT91C_CSD_R2W_F_M 0x07 -#define AT91C_CSD_MMC_DEF_ECC_S 29 // [30:29] reserved for MMC compatibility -#define AT91C_CSD_MMC_DEF_ECC_M 0x03 -#define AT91C_CSD_WP_GRP_EN_S 31 // [31:31] -#define AT91C_CSD_WP_GRP_EN_M 0x01 - -// Seconde Response INT <=> CSD[2] : bits 32 to 63 -#define AT91C_CSD_v21_WP_GRP_SIZE_S 0 // [38:32] -#define AT91C_CSD_v21_WP_GRP_SIZE_M 0x7F -#define AT91C_CSD_v21_SECT_SIZE_S 7 // [45:39] -#define AT91C_CSD_v21_SECT_SIZE_M 0x7F -#define AT91C_CSD_v21_ER_BLEN_EN_S 14 // [46:46] -#define AT91C_CSD_v21_ER_BLEN_EN_M 0x01 - -#define AT91C_CSD_v22_WP_GRP_SIZE_S 0 // [36:32] -#define AT91C_CSD_v22_WP_GRP_SIZE_M 0x1F -#define AT91C_CSD_v22_ER_GRP_SIZE_S 5 // [41:37] -#define AT91C_CSD_v22_ER_GRP_SIZE_M 0x1F -#define AT91C_CSD_v22_SECT_SIZE_S 10 // [46:42] -#define AT91C_CSD_v22_SECT_SIZE_M 0x1F - -#define AT91C_CSD_C_SIZE_M_S 15 // [49:47] -#define AT91C_CSD_C_SIZE_M_M 0x07 -#define AT91C_CSD_VDD_WMAX_S 18 // [52:50] -#define AT91C_CSD_VDD_WMAX_M 0x07 -#define AT91C_CSD_VDD_WMIN_S 21 // [55:53] -#define AT91C_CSD_VDD_WMIN_M 0x07 -#define AT91C_CSD_RCUR_MAX_S 24 // [58:56] -#define AT91C_CSD_RCUR_MAX_M 0x07 -#define AT91C_CSD_RCUR_MIN_S 27 // [61:59] -#define AT91C_CSD_RCUR_MIN_M 0x07 -#define AT91C_CSD_CSIZE_L_S 30 // [63:62] <=> 2 LSB of CSIZE -#define AT91C_CSD_CSIZE_L_M 0x03 - -// Third Response INT <=> CSD[1] : bits 64 to 95 -#define AT91C_CSD_CSIZE_H_S 0 // [73:64] <=> 10 MSB of CSIZE -#define AT91C_CSD_CSIZE_H_M 0x03FF -// reserved 10 // [75:74] -// reserved 0x03 -#define AT91C_CSD_DSR_I_S 12 // [76:76] -#define AT91C_CSD_DSR_I_M 0x01 -#define AT91C_CSD_RD_B_MIS_S 13 // [77:77] -#define AT91C_CSD_RD_B_MIS_M 0x01 -#define AT91C_CSD_WR_B_MIS_S 14 // [78:78] -#define AT91C_CSD_WR_B_MIS_M 0x01 -#define AT91C_CSD_RD_B_PAR_S 15 // [79:79] -#define AT91C_CSD_RD_B_PAR_M 0x01 -#define AT91C_CSD_RD_B_LEN_S 16 // [83:80] -#define AT91C_CSD_RD_B_LEN_M 0x0F -#define AT91C_CSD_CCC_S 20 // [95:84] -#define AT91C_CSD_CCC_M 0x0FFF - -// Fourth Response INT <=> CSD[0] : bits 96 to 127 -#define AT91C_CSD_TRANS_SPEED_S 0 // [103:96] -#define AT91C_CSD_TRANS_SPEED_M 0xFF -#define AT91C_CSD_NSAC_S 8 // [111:104] -#define AT91C_CSD_NSAC_M 0xFF -#define AT91C_CSD_TAAC_S 16 // [119:112] -#define AT91C_CSD_TAAC_M 0xFF -// reserved 24 // [121:120] -// reserved 0x03 -#define AT91C_CSD_MMC_SPEC_VERS_S 26 // [125:122] reserved for MMC compatibility -#define AT91C_CSD_MMC_SPEC_VERS_M 0x0F -#define AT91C_CSD_STRUCT_S 30 // [127:126] -#define AT91C_CSD_STRUCT_M 0x03 - -///////////////////////////////////////////////////////////////////////////////////////////////////// - -#endif - diff --git a/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.h b/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.h deleted file mode 100644 index 0cd153b421..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.h +++ /dev/null @@ -1,2745 +0,0 @@ -// ---------------------------------------------------------------------------- -// ATMEL Microcontroller Software Support - ROUSSET - -// ---------------------------------------------------------------------------- -// The software is delivered "AS IS" without warranty or condition of any -// kind, either express, implied or statutory. This includes without -// limitation any warranty or condition with respect to merchantability or -// fitness for any particular purpose, or against the infringements of -// intellectual property rights of others. -// ---------------------------------------------------------------------------- -// File Name : AT91RM9200.h -// Object : AT91RM9200 definitions -// Generated : AT91 SW Application Group 11/19/2003 (17:20:50) -// -// CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// -// CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// -// CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// -// CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// -// CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// -// CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// -// CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// -// CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// -// CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// -// CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// -// CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// -// CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// -// CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// -// CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// -// CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// -// CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// -// CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// -// CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// -// CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// -// CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// -// CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// -// ---------------------------------------------------------------------------- - -#ifndef AT91RM9200_H -#define AT91RM9200_H - -typedef volatile unsigned int AT91_REG;// Hardware register definition - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Peripherals -// ***************************************************************************** -typedef struct _AT91S_SYS { - AT91_REG AIC_SMR[32]; // Source Mode Register - AT91_REG AIC_SVR[32]; // Source Vector Register - AT91_REG AIC_IVR; // IRQ Vector Register - AT91_REG AIC_FVR; // FIQ Vector Register - AT91_REG AIC_ISR; // Interrupt Status Register - AT91_REG AIC_IPR; // Interrupt Pending Register - AT91_REG AIC_IMR; // Interrupt Mask Register - AT91_REG AIC_CISR; // Core Interrupt Status Register - AT91_REG Reserved0[2]; // - AT91_REG AIC_IECR; // Interrupt Enable Command Register - AT91_REG AIC_IDCR; // Interrupt Disable Command Register - AT91_REG AIC_ICCR; // Interrupt Clear Command Register - AT91_REG AIC_ISCR; // Interrupt Set Command Register - AT91_REG AIC_EOICR; // End of Interrupt Command Register - AT91_REG AIC_SPU; // Spurious Vector Register - AT91_REG AIC_DCR; // Debug Control Register (Protect) - AT91_REG Reserved1[1]; // - AT91_REG AIC_FFER; // Fast Forcing Enable Register - AT91_REG AIC_FFDR; // Fast Forcing Disable Register - AT91_REG AIC_FFSR; // Fast Forcing Status Register - AT91_REG Reserved2[45]; // - AT91_REG DBGU_CR; // Control Register - AT91_REG DBGU_MR; // Mode Register - AT91_REG DBGU_IER; // Interrupt Enable Register - AT91_REG DBGU_IDR; // Interrupt Disable Register - AT91_REG DBGU_IMR; // Interrupt Mask Register - AT91_REG DBGU_CSR; // Channel Status Register - AT91_REG DBGU_RHR; // Receiver Holding Register - AT91_REG DBGU_THR; // Transmitter Holding Register - AT91_REG DBGU_BRGR; // Baud Rate Generator Register - AT91_REG Reserved3[7]; // - AT91_REG DBGU_C1R; // Chip ID1 Register - AT91_REG DBGU_C2R; // Chip ID2 Register - AT91_REG DBGU_FNTR; // Force NTRST Register - AT91_REG Reserved4[45]; // - AT91_REG DBGU_RPR; // Receive Pointer Register - AT91_REG DBGU_RCR; // Receive Counter Register - AT91_REG DBGU_TPR; // Transmit Pointer Register - AT91_REG DBGU_TCR; // Transmit Counter Register - AT91_REG DBGU_RNPR; // Receive Next Pointer Register - AT91_REG DBGU_RNCR; // Receive Next Counter Register - AT91_REG DBGU_TNPR; // Transmit Next Pointer Register - AT91_REG DBGU_TNCR; // Transmit Next Counter Register - AT91_REG DBGU_PTCR; // PDC Transfer Control Register - AT91_REG DBGU_PTSR; // PDC Transfer Status Register - AT91_REG Reserved5[54]; // - AT91_REG PIOA_PER; // PIO Enable Register - AT91_REG PIOA_PDR; // PIO Disable Register - AT91_REG PIOA_PSR; // PIO Status Register - AT91_REG Reserved6[1]; // - AT91_REG PIOA_OER; // Output Enable Register - AT91_REG PIOA_ODR; // Output Disable Registerr - AT91_REG PIOA_OSR; // Output Status Register - AT91_REG Reserved7[1]; // - AT91_REG PIOA_IFER; // Input Filter Enable Register - AT91_REG PIOA_IFDR; // Input Filter Disable Register - AT91_REG PIOA_IFSR; // Input Filter Status Register - AT91_REG Reserved8[1]; // - AT91_REG PIOA_SODR; // Set Output Data Register - AT91_REG PIOA_CODR; // Clear Output Data Register - AT91_REG PIOA_ODSR; // Output Data Status Register - AT91_REG PIOA_PDSR; // Pin Data Status Register - AT91_REG PIOA_IER; // Interrupt Enable Register - AT91_REG PIOA_IDR; // Interrupt Disable Register - AT91_REG PIOA_IMR; // Interrupt Mask Register - AT91_REG PIOA_ISR; // Interrupt Status Register - AT91_REG PIOA_MDER; // Multi-driver Enable Register - AT91_REG PIOA_MDDR; // Multi-driver Disable Register - AT91_REG PIOA_MDSR; // Multi-driver Status Register - AT91_REG Reserved9[1]; // - AT91_REG PIOA_PPUDR; // Pull-up Disable Register - AT91_REG PIOA_PPUER; // Pull-up Enable Register - AT91_REG PIOA_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved10[1]; // - AT91_REG PIOA_ASR; // Select A Register - AT91_REG PIOA_BSR; // Select B Register - AT91_REG PIOA_ABSR; // AB Select Status Register - AT91_REG Reserved11[9]; // - AT91_REG PIOA_OWER; // Output Write Enable Register - AT91_REG PIOA_OWDR; // Output Write Disable Register - AT91_REG PIOA_OWSR; // Output Write Status Register - AT91_REG Reserved12[85]; // - AT91_REG PIOB_PER; // PIO Enable Register - AT91_REG PIOB_PDR; // PIO Disable Register - AT91_REG PIOB_PSR; // PIO Status Register - AT91_REG Reserved13[1]; // - AT91_REG PIOB_OER; // Output Enable Register - AT91_REG PIOB_ODR; // Output Disable Registerr - AT91_REG PIOB_OSR; // Output Status Register - AT91_REG Reserved14[1]; // - AT91_REG PIOB_IFER; // Input Filter Enable Register - AT91_REG PIOB_IFDR; // Input Filter Disable Register - AT91_REG PIOB_IFSR; // Input Filter Status Register - AT91_REG Reserved15[1]; // - AT91_REG PIOB_SODR; // Set Output Data Register - AT91_REG PIOB_CODR; // Clear Output Data Register - AT91_REG PIOB_ODSR; // Output Data Status Register - AT91_REG PIOB_PDSR; // Pin Data Status Register - AT91_REG PIOB_IER; // Interrupt Enable Register - AT91_REG PIOB_IDR; // Interrupt Disable Register - AT91_REG PIOB_IMR; // Interrupt Mask Register - AT91_REG PIOB_ISR; // Interrupt Status Register - AT91_REG PIOB_MDER; // Multi-driver Enable Register - AT91_REG PIOB_MDDR; // Multi-driver Disable Register - AT91_REG PIOB_MDSR; // Multi-driver Status Register - AT91_REG Reserved16[1]; // - AT91_REG PIOB_PPUDR; // Pull-up Disable Register - AT91_REG PIOB_PPUER; // Pull-up Enable Register - AT91_REG PIOB_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved17[1]; // - AT91_REG PIOB_ASR; // Select A Register - AT91_REG PIOB_BSR; // Select B Register - AT91_REG PIOB_ABSR; // AB Select Status Register - AT91_REG Reserved18[9]; // - AT91_REG PIOB_OWER; // Output Write Enable Register - AT91_REG PIOB_OWDR; // Output Write Disable Register - AT91_REG PIOB_OWSR; // Output Write Status Register - AT91_REG Reserved19[85]; // - AT91_REG PIOC_PER; // PIO Enable Register - AT91_REG PIOC_PDR; // PIO Disable Register - AT91_REG PIOC_PSR; // PIO Status Register - AT91_REG Reserved20[1]; // - AT91_REG PIOC_OER; // Output Enable Register - AT91_REG PIOC_ODR; // Output Disable Registerr - AT91_REG PIOC_OSR; // Output Status Register - AT91_REG Reserved21[1]; // - AT91_REG PIOC_IFER; // Input Filter Enable Register - AT91_REG PIOC_IFDR; // Input Filter Disable Register - AT91_REG PIOC_IFSR; // Input Filter Status Register - AT91_REG Reserved22[1]; // - AT91_REG PIOC_SODR; // Set Output Data Register - AT91_REG PIOC_CODR; // Clear Output Data Register - AT91_REG PIOC_ODSR; // Output Data Status Register - AT91_REG PIOC_PDSR; // Pin Data Status Register - AT91_REG PIOC_IER; // Interrupt Enable Register - AT91_REG PIOC_IDR; // Interrupt Disable Register - AT91_REG PIOC_IMR; // Interrupt Mask Register - AT91_REG PIOC_ISR; // Interrupt Status Register - AT91_REG PIOC_MDER; // Multi-driver Enable Register - AT91_REG PIOC_MDDR; // Multi-driver Disable Register - AT91_REG PIOC_MDSR; // Multi-driver Status Register - AT91_REG Reserved23[1]; // - AT91_REG PIOC_PPUDR; // Pull-up Disable Register - AT91_REG PIOC_PPUER; // Pull-up Enable Register - AT91_REG PIOC_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved24[1]; // - AT91_REG PIOC_ASR; // Select A Register - AT91_REG PIOC_BSR; // Select B Register - AT91_REG PIOC_ABSR; // AB Select Status Register - AT91_REG Reserved25[9]; // - AT91_REG PIOC_OWER; // Output Write Enable Register - AT91_REG PIOC_OWDR; // Output Write Disable Register - AT91_REG PIOC_OWSR; // Output Write Status Register - AT91_REG Reserved26[85]; // - AT91_REG PIOD_PER; // PIO Enable Register - AT91_REG PIOD_PDR; // PIO Disable Register - AT91_REG PIOD_PSR; // PIO Status Register - AT91_REG Reserved27[1]; // - AT91_REG PIOD_OER; // Output Enable Register - AT91_REG PIOD_ODR; // Output Disable Registerr - AT91_REG PIOD_OSR; // Output Status Register - AT91_REG Reserved28[1]; // - AT91_REG PIOD_IFER; // Input Filter Enable Register - AT91_REG PIOD_IFDR; // Input Filter Disable Register - AT91_REG PIOD_IFSR; // Input Filter Status Register - AT91_REG Reserved29[1]; // - AT91_REG PIOD_SODR; // Set Output Data Register - AT91_REG PIOD_CODR; // Clear Output Data Register - AT91_REG PIOD_ODSR; // Output Data Status Register - AT91_REG PIOD_PDSR; // Pin Data Status Register - AT91_REG PIOD_IER; // Interrupt Enable Register - AT91_REG PIOD_IDR; // Interrupt Disable Register - AT91_REG PIOD_IMR; // Interrupt Mask Register - AT91_REG PIOD_ISR; // Interrupt Status Register - AT91_REG PIOD_MDER; // Multi-driver Enable Register - AT91_REG PIOD_MDDR; // Multi-driver Disable Register - AT91_REG PIOD_MDSR; // Multi-driver Status Register - AT91_REG Reserved30[1]; // - AT91_REG PIOD_PPUDR; // Pull-up Disable Register - AT91_REG PIOD_PPUER; // Pull-up Enable Register - AT91_REG PIOD_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved31[1]; // - AT91_REG PIOD_ASR; // Select A Register - AT91_REG PIOD_BSR; // Select B Register - AT91_REG PIOD_ABSR; // AB Select Status Register - AT91_REG Reserved32[9]; // - AT91_REG PIOD_OWER; // Output Write Enable Register - AT91_REG PIOD_OWDR; // Output Write Disable Register - AT91_REG PIOD_OWSR; // Output Write Status Register - AT91_REG Reserved33[85]; // - AT91_REG PMC_SCER; // System Clock Enable Register - AT91_REG PMC_SCDR; // System Clock Disable Register - AT91_REG PMC_SCSR; // System Clock Status Register - AT91_REG Reserved34[1]; // - AT91_REG PMC_PCER; // Peripheral Clock Enable Register - AT91_REG PMC_PCDR; // Peripheral Clock Disable Register - AT91_REG PMC_PCSR; // Peripheral Clock Status Register - AT91_REG Reserved35[1]; // - AT91_REG CKGR_MOR; // Main Oscillator Register - AT91_REG CKGR_MCFR; // Main Clock Frequency Register - AT91_REG CKGR_PLLAR; // PLL A Register - AT91_REG CKGR_PLLBR; // PLL B Register - AT91_REG PMC_MCKR; // Master Clock Register - AT91_REG Reserved36[3]; // - AT91_REG PMC_PCKR[8]; // Programmable Clock Register - AT91_REG PMC_IER; // Interrupt Enable Register - AT91_REG PMC_IDR; // Interrupt Disable Register - AT91_REG PMC_SR; // Status Register - AT91_REG PMC_IMR; // Interrupt Mask Register - AT91_REG Reserved37[36]; // - AT91_REG ST_CR; // Control Register - AT91_REG ST_PIMR; // Period Interval Mode Register - AT91_REG ST_WDMR; // Watchdog Mode Register - AT91_REG ST_RTMR; // Real-time Mode Register - AT91_REG ST_SR; // Status Register - AT91_REG ST_IER; // Interrupt Enable Register - AT91_REG ST_IDR; // Interrupt Disable Register - AT91_REG ST_IMR; // Interrupt Mask Register - AT91_REG ST_RTAR; // Real-time Alarm Register - AT91_REG ST_CRTR; // Current Real-time Register - AT91_REG Reserved38[54]; // - AT91_REG RTC_CR; // Control Register - AT91_REG RTC_MR; // Mode Register - AT91_REG RTC_TIMR; // Time Register - AT91_REG RTC_CALR; // Calendar Register - AT91_REG RTC_TIMALR; // Time Alarm Register - AT91_REG RTC_CALALR; // Calendar Alarm Register - AT91_REG RTC_SR; // Status Register - AT91_REG RTC_SCCR; // Status Clear Command Register - AT91_REG RTC_IER; // Interrupt Enable Register - AT91_REG RTC_IDR; // Interrupt Disable Register - AT91_REG RTC_IMR; // Interrupt Mask Register - AT91_REG RTC_VER; // Valid Entry Register - AT91_REG Reserved39[52]; // - AT91_REG MC_RCR; // MC Remap Control Register - AT91_REG MC_ASR; // MC Abort Status Register - AT91_REG MC_AASR; // MC Abort Address Status Register - AT91_REG Reserved40[1]; // - AT91_REG MC_PUIA[16]; // MC Protection Unit Area - AT91_REG MC_PUP; // MC Protection Unit Peripherals - AT91_REG MC_PUER; // MC Protection Unit Enable Register - AT91_REG Reserved41[2]; // - AT91_REG EBI_CSA; // Chip Select Assignment Register - AT91_REG EBI_CFGR; // Configuration Register - AT91_REG Reserved42[2]; // - AT91_REG EBI_SMC2_CSR[8]; // SMC2 Chip Select Register - AT91_REG EBI_SDRC_MR; // SDRAM Controller Mode Register - AT91_REG EBI_SDRC_TR; // SDRAM Controller Refresh Timer Register - AT91_REG EBI_SDRC_CR; // SDRAM Controller Configuration Register - AT91_REG EBI_SDRC_SRR; // SDRAM Controller Self Refresh Register - AT91_REG EBI_SDRC_LPR; // SDRAM Controller Low Power Register - AT91_REG EBI_SDRC_IER; // SDRAM Controller Interrupt Enable Register - AT91_REG EBI_SDRC_IDR; // SDRAM Controller Interrupt Disable Register - AT91_REG EBI_SDRC_IMR; // SDRAM Controller Interrupt Mask Register - AT91_REG EBI_SDRC_ISR; // SDRAM Controller Interrupt Mask Register - AT91_REG Reserved43[3]; // - AT91_REG EBI_BFC_MR; // BFC Mode Register -} AT91S_SYS, *AT91PS_SYS; - - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Memory Controller Interface -// ***************************************************************************** -typedef struct _AT91S_MC { - AT91_REG MC_RCR; // MC Remap Control Register - AT91_REG MC_ASR; // MC Abort Status Register - AT91_REG MC_AASR; // MC Abort Address Status Register - AT91_REG Reserved0[1]; // - AT91_REG MC_PUIA[16]; // MC Protection Unit Area - AT91_REG MC_PUP; // MC Protection Unit Peripherals - AT91_REG MC_PUER; // MC Protection Unit Enable Register -} AT91S_MC, *AT91PS_MC; - -// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- -#define AT91C_MC_RCB ((unsigned int) 0x1 << 0) // (MC) Remap Command Bit -// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- -#define AT91C_MC_UNDADD ((unsigned int) 0x1 << 0) // (MC) Undefined Addess Abort Status -#define AT91C_MC_MISADD ((unsigned int) 0x1 << 1) // (MC) Misaligned Addess Abort Status -#define AT91C_MC_MPU ((unsigned int) 0x1 << 2) // (MC) Memory protection Unit Abort Status -#define AT91C_MC_ABTSZ ((unsigned int) 0x3 << 8) // (MC) Abort Size Status -#define AT91C_MC_ABTSZ_BYTE ((unsigned int) 0x0 << 8) // (MC) Byte -#define AT91C_MC_ABTSZ_HWORD ((unsigned int) 0x1 << 8) // (MC) Half-word -#define AT91C_MC_ABTSZ_WORD ((unsigned int) 0x2 << 8) // (MC) Word -#define AT91C_MC_ABTTYP ((unsigned int) 0x3 << 10) // (MC) Abort Type Status -#define AT91C_MC_ABTTYP_DATAR ((unsigned int) 0x0 << 10) // (MC) Data Read -#define AT91C_MC_ABTTYP_DATAW ((unsigned int) 0x1 << 10) // (MC) Data Write -#define AT91C_MC_ABTTYP_FETCH ((unsigned int) 0x2 << 10) // (MC) Code Fetch -#define AT91C_MC_MST0 ((unsigned int) 0x1 << 16) // (MC) Master 0 Abort Source -#define AT91C_MC_MST1 ((unsigned int) 0x1 << 17) // (MC) Master 1 Abort Source -#define AT91C_MC_SVMST0 ((unsigned int) 0x1 << 24) // (MC) Saved Master 0 Abort Source -#define AT91C_MC_SVMST1 ((unsigned int) 0x1 << 25) // (MC) Saved Master 1 Abort Source -// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- -#define AT91C_MC_PROT ((unsigned int) 0x3 << 0) // (MC) Protection -#define AT91C_MC_PROT_PNAUNA ((unsigned int) 0x0) // (MC) Privilege: No Access, User: No Access -#define AT91C_MC_PROT_PRWUNA ((unsigned int) 0x1) // (MC) Privilege: Read/Write, User: No Access -#define AT91C_MC_PROT_PRWURO ((unsigned int) 0x2) // (MC) Privilege: Read/Write, User: Read Only -#define AT91C_MC_PROT_PRWURW ((unsigned int) 0x3) // (MC) Privilege: Read/Write, User: Read/Write -#define AT91C_MC_SIZE ((unsigned int) 0xF << 4) // (MC) Internal Area Size -#define AT91C_MC_SIZE_1KB ((unsigned int) 0x0 << 4) // (MC) Area size 1KByte -#define AT91C_MC_SIZE_2KB ((unsigned int) 0x1 << 4) // (MC) Area size 2KByte -#define AT91C_MC_SIZE_4KB ((unsigned int) 0x2 << 4) // (MC) Area size 4KByte -#define AT91C_MC_SIZE_8KB ((unsigned int) 0x3 << 4) // (MC) Area size 8KByte -#define AT91C_MC_SIZE_16KB ((unsigned int) 0x4 << 4) // (MC) Area size 16KByte -#define AT91C_MC_SIZE_32KB ((unsigned int) 0x5 << 4) // (MC) Area size 32KByte -#define AT91C_MC_SIZE_64KB ((unsigned int) 0x6 << 4) // (MC) Area size 64KByte -#define AT91C_MC_SIZE_128KB ((unsigned int) 0x7 << 4) // (MC) Area size 128KByte -#define AT91C_MC_SIZE_256KB ((unsigned int) 0x8 << 4) // (MC) Area size 256KByte -#define AT91C_MC_SIZE_512KB ((unsigned int) 0x9 << 4) // (MC) Area size 512KByte -#define AT91C_MC_SIZE_1MB ((unsigned int) 0xA << 4) // (MC) Area size 1MByte -#define AT91C_MC_SIZE_2MB ((unsigned int) 0xB << 4) // (MC) Area size 2MByte -#define AT91C_MC_SIZE_4MB ((unsigned int) 0xC << 4) // (MC) Area size 4MByte -#define AT91C_MC_SIZE_8MB ((unsigned int) 0xD << 4) // (MC) Area size 8MByte -#define AT91C_MC_SIZE_16MB ((unsigned int) 0xE << 4) // (MC) Area size 16MByte -#define AT91C_MC_SIZE_64MB ((unsigned int) 0xF << 4) // (MC) Area size 64MByte -#define AT91C_MC_BA ((unsigned int) 0x3FFFF << 10) // (MC) Internal Area Base Address -// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- -// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- -#define AT91C_MC_PUEB ((unsigned int) 0x1 << 0) // (MC) Protection Unit enable Bit - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface -// ***************************************************************************** -typedef struct _AT91S_RTC { - AT91_REG RTC_CR; // Control Register - AT91_REG RTC_MR; // Mode Register - AT91_REG RTC_TIMR; // Time Register - AT91_REG RTC_CALR; // Calendar Register - AT91_REG RTC_TIMALR; // Time Alarm Register - AT91_REG RTC_CALALR; // Calendar Alarm Register - AT91_REG RTC_SR; // Status Register - AT91_REG RTC_SCCR; // Status Clear Command Register - AT91_REG RTC_IER; // Interrupt Enable Register - AT91_REG RTC_IDR; // Interrupt Disable Register - AT91_REG RTC_IMR; // Interrupt Mask Register - AT91_REG RTC_VER; // Valid Entry Register -} AT91S_RTC, *AT91PS_RTC; - -// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- -#define AT91C_RTC_UPDTIM ((unsigned int) 0x1 << 0) // (RTC) Update Request Time Register -#define AT91C_RTC_UPDCAL ((unsigned int) 0x1 << 1) // (RTC) Update Request Calendar Register -#define AT91C_RTC_TIMEVSEL ((unsigned int) 0x3 << 8) // (RTC) Time Event Selection -#define AT91C_RTC_TIMEVSEL_MINUTE ((unsigned int) 0x0 << 8) // (RTC) Minute change. -#define AT91C_RTC_TIMEVSEL_HOUR ((unsigned int) 0x1 << 8) // (RTC) Hour change. -#define AT91C_RTC_TIMEVSEL_DAY24 ((unsigned int) 0x2 << 8) // (RTC) Every day at midnight. -#define AT91C_RTC_TIMEVSEL_DAY12 ((unsigned int) 0x3 << 8) // (RTC) Every day at noon. -#define AT91C_RTC_CALEVSEL ((unsigned int) 0x3 << 16) // (RTC) Calendar Event Selection -#define AT91C_RTC_CALEVSEL_WEEK ((unsigned int) 0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00). -#define AT91C_RTC_CALEVSEL_MONTH ((unsigned int) 0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00). -#define AT91C_RTC_CALEVSEL_YEAR ((unsigned int) 0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00). -// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- -#define AT91C_RTC_HRMOD ((unsigned int) 0x1 << 0) // (RTC) 12-24 hour Mode -// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- -#define AT91C_RTC_SEC ((unsigned int) 0x7F << 0) // (RTC) Current Second -#define AT91C_RTC_MIN ((unsigned int) 0x7F << 8) // (RTC) Current Minute -#define AT91C_RTC_HOUR ((unsigned int) 0x1F << 16) // (RTC) Current Hour -#define AT91C_RTC_AMPM ((unsigned int) 0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator -// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- -#define AT91C_RTC_CENT ((unsigned int) 0x3F << 0) // (RTC) Current Century -#define AT91C_RTC_YEAR ((unsigned int) 0xFF << 8) // (RTC) Current Year -#define AT91C_RTC_MONTH ((unsigned int) 0x1F << 16) // (RTC) Current Month -#define AT91C_RTC_DAY ((unsigned int) 0x7 << 21) // (RTC) Current Day -#define AT91C_RTC_DATE ((unsigned int) 0x3F << 24) // (RTC) Current Date -// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- -#define AT91C_RTC_SECEN ((unsigned int) 0x1 << 7) // (RTC) Second Alarm Enable -#define AT91C_RTC_MINEN ((unsigned int) 0x1 << 15) // (RTC) Minute Alarm -#define AT91C_RTC_HOUREN ((unsigned int) 0x1 << 23) // (RTC) Current Hour -// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- -#define AT91C_RTC_MONTHEN ((unsigned int) 0x1 << 23) // (RTC) Month Alarm Enable -#define AT91C_RTC_DATEEN ((unsigned int) 0x1 << 31) // (RTC) Date Alarm Enable -// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- -#define AT91C_RTC_ACKUPD ((unsigned int) 0x1 << 0) // (RTC) Acknowledge for Update -#define AT91C_RTC_ALARM ((unsigned int) 0x1 << 1) // (RTC) Alarm Flag -#define AT91C_RTC_SECEV ((unsigned int) 0x1 << 2) // (RTC) Second Event -#define AT91C_RTC_TIMEV ((unsigned int) 0x1 << 3) // (RTC) Time Event -#define AT91C_RTC_CALEV ((unsigned int) 0x1 << 4) // (RTC) Calendar event -// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- -// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- -// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- -// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- -// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- -#define AT91C_RTC_NVTIM ((unsigned int) 0x1 << 0) // (RTC) Non valid Time -#define AT91C_RTC_NVCAL ((unsigned int) 0x1 << 1) // (RTC) Non valid Calendar -#define AT91C_RTC_NVTIMALR ((unsigned int) 0x1 << 2) // (RTC) Non valid time Alarm -#define AT91C_RTC_NVCALALR ((unsigned int) 0x1 << 3) // (RTC) Nonvalid Calendar Alarm - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Timer Interface -// ***************************************************************************** -typedef struct _AT91S_ST { - AT91_REG ST_CR; // Control Register - AT91_REG ST_PIMR; // Period Interval Mode Register - AT91_REG ST_WDMR; // Watchdog Mode Register - AT91_REG ST_RTMR; // Real-time Mode Register - AT91_REG ST_SR; // Status Register - AT91_REG ST_IER; // Interrupt Enable Register - AT91_REG ST_IDR; // Interrupt Disable Register - AT91_REG ST_IMR; // Interrupt Mask Register - AT91_REG ST_RTAR; // Real-time Alarm Register - AT91_REG ST_CRTR; // Current Real-time Register -} AT91S_ST, *AT91PS_ST; - -// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- -#define AT91C_ST_WDRST ((unsigned int) 0x1 << 0) // (ST) Watchdog Timer Restart -// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- -#define AT91C_ST_PIV ((unsigned int) 0xFFFF << 0) // (ST) Watchdog Timer Restart -// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- -#define AT91C_ST_WDV ((unsigned int) 0xFFFF << 0) // (ST) Watchdog Timer Restart -#define AT91C_ST_RSTEN ((unsigned int) 0x1 << 16) // (ST) Reset Enable -#define AT91C_ST_EXTEN ((unsigned int) 0x1 << 17) // (ST) External Signal Assertion Enable -// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- -#define AT91C_ST_RTPRES ((unsigned int) 0xFFFF << 0) // (ST) Real-time Timer Prescaler Value -// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- -#define AT91C_ST_PITS ((unsigned int) 0x1 << 0) // (ST) Period Interval Timer Interrupt -#define AT91C_ST_WDOVF ((unsigned int) 0x1 << 1) // (ST) Watchdog Overflow -#define AT91C_ST_RTTINC ((unsigned int) 0x1 << 2) // (ST) Real-time Timer Increment -#define AT91C_ST_ALMS ((unsigned int) 0x1 << 3) // (ST) Alarm Status -// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- -// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- -// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- -// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- -#define AT91C_ST_ALMV ((unsigned int) 0xFFFFF << 0) // (ST) Alarm Value Value -// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- -#define AT91C_ST_CRTV ((unsigned int) 0xFFFFF << 0) // (ST) Current Real-time Value - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Power Management Controler -// ***************************************************************************** -typedef struct _AT91S_PMC { - AT91_REG PMC_SCER; // System Clock Enable Register - AT91_REG PMC_SCDR; // System Clock Disable Register - AT91_REG PMC_SCSR; // System Clock Status Register - AT91_REG Reserved0[1]; // - AT91_REG PMC_PCER; // Peripheral Clock Enable Register - AT91_REG PMC_PCDR; // Peripheral Clock Disable Register - AT91_REG PMC_PCSR; // Peripheral Clock Status Register - AT91_REG Reserved1[5]; // - AT91_REG PMC_MCKR; // Master Clock Register - AT91_REG Reserved2[3]; // - AT91_REG PMC_PCKR[8]; // Programmable Clock Register - AT91_REG PMC_IER; // Interrupt Enable Register - AT91_REG PMC_IDR; // Interrupt Disable Register - AT91_REG PMC_SR; // Status Register - AT91_REG PMC_IMR; // Interrupt Mask Register -} AT91S_PMC, *AT91PS_PMC; - -// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- -#define AT91C_PMC_PCK ((unsigned int) 0x1 << 0) // (PMC) Processor Clock -#define AT91C_PMC_UDP ((unsigned int) 0x1 << 1) // (PMC) USB Device Port Clock -#define AT91C_PMC_MCKUDP ((unsigned int) 0x1 << 2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend -#define AT91C_PMC_UHP ((unsigned int) 0x1 << 4) // (PMC) USB Host Port Clock -#define AT91C_PMC_PCK0 ((unsigned int) 0x1 << 8) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK1 ((unsigned int) 0x1 << 9) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK2 ((unsigned int) 0x1 << 10) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK3 ((unsigned int) 0x1 << 11) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK4 ((unsigned int) 0x1 << 12) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK5 ((unsigned int) 0x1 << 13) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK6 ((unsigned int) 0x1 << 14) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK7 ((unsigned int) 0x1 << 15) // (PMC) Programmable Clock Output -// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- -// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- -// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- -#define AT91C_PMC_CSS ((unsigned int) 0x3 << 0) // (PMC) Programmable Clock Selection -#define AT91C_PMC_CSS_SLOW_CLK ((unsigned int) 0x0) // (PMC) Slow Clock is selected -#define AT91C_PMC_CSS_MAIN_CLK ((unsigned int) 0x1) // (PMC) Main Clock is selected -#define AT91C_PMC_CSS_PLLA_CLK ((unsigned int) 0x2) // (PMC) Clock from PLL A is selected -#define AT91C_PMC_CSS_PLLB_CLK ((unsigned int) 0x3) // (PMC) Clock from PLL B is selected -#define AT91C_PMC_PRES ((unsigned int) 0x7 << 2) // (PMC) Programmable Clock Prescaler -#define AT91C_PMC_PRES_CLK ((unsigned int) 0x0 << 2) // (PMC) Selected clock -#define AT91C_PMC_PRES_CLK_2 ((unsigned int) 0x1 << 2) // (PMC) Selected clock divided by 2 -#define AT91C_PMC_PRES_CLK_4 ((unsigned int) 0x2 << 2) // (PMC) Selected clock divided by 4 -#define AT91C_PMC_PRES_CLK_8 ((unsigned int) 0x3 << 2) // (PMC) Selected clock divided by 8 -#define AT91C_PMC_PRES_CLK_16 ((unsigned int) 0x4 << 2) // (PMC) Selected clock divided by 16 -#define AT91C_PMC_PRES_CLK_32 ((unsigned int) 0x5 << 2) // (PMC) Selected clock divided by 32 -#define AT91C_PMC_PRES_CLK_64 ((unsigned int) 0x6 << 2) // (PMC) Selected clock divided by 64 -#define AT91C_PMC_MDIV ((unsigned int) 0x3 << 8) // (PMC) Master Clock Division -#define AT91C_PMC_MDIV_1 ((unsigned int) 0x0 << 8) // (PMC) The master clock and the processor clock are the same -#define AT91C_PMC_MDIV_2 ((unsigned int) 0x1 << 8) // (PMC) The processor clock is twice as fast as the master clock -#define AT91C_PMC_MDIV_3 ((unsigned int) 0x2 << 8) // (PMC) The processor clock is three times faster than the master clock -#define AT91C_PMC_MDIV_4 ((unsigned int) 0x3 << 8) // (PMC) The processor clock is four times faster than the master clock -// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- -// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- -#define AT91C_PMC_MOSCS ((unsigned int) 0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKA ((unsigned int) 0x1 << 1) // (PMC) PLL A Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKB ((unsigned int) 0x1 << 2) // (PMC) PLL B Status/Enable/Disable/Mask -#define AT91C_PMC_MCKRDY ((unsigned int) 0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK0RDY ((unsigned int) 0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK1RDY ((unsigned int) 0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK2RDY ((unsigned int) 0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK3RDY ((unsigned int) 0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK4RDY ((unsigned int) 0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK5RDY ((unsigned int) 0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK6RDY ((unsigned int) 0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK7RDY ((unsigned int) 0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask -// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- -// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- -// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Clock Generator Controler -// ***************************************************************************** -typedef struct _AT91S_CKGR { - AT91_REG CKGR_MOR; // Main Oscillator Register - AT91_REG CKGR_MCFR; // Main Clock Frequency Register - AT91_REG CKGR_PLLAR; // PLL A Register - AT91_REG CKGR_PLLBR; // PLL B Register -} AT91S_CKGR, *AT91PS_CKGR; - -// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- -#define AT91C_CKGR_MOSCEN ((unsigned int) 0x1 << 0) // (CKGR) Main Oscillator Enable -#define AT91C_CKGR_OSCTEST ((unsigned int) 0x1 << 1) // (CKGR) Oscillator Test -#define AT91C_CKGR_OSCOUNT ((unsigned int) 0xFF << 8) // (CKGR) Main Oscillator Start-up Time -// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- -#define AT91C_CKGR_MAINF ((unsigned int) 0xFFFF << 0) // (CKGR) Main Clock Frequency -#define AT91C_CKGR_MAINRDY ((unsigned int) 0x1 << 16) // (CKGR) Main Clock Ready -// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- -#define AT91C_CKGR_DIVA ((unsigned int) 0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVA_0 ((unsigned int) 0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVA_BYPASS ((unsigned int) 0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLACOUNT ((unsigned int) 0x3F << 8) // (CKGR) PLL A Counter -#define AT91C_CKGR_OUTA ((unsigned int) 0x3 << 14) // (CKGR) PLL A Output Frequency Range -#define AT91C_CKGR_OUTA_0 ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_1 ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_2 ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_3 ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_MULA ((unsigned int) 0x7FF << 16) // (CKGR) PLL A Multiplier -#define AT91C_CKGR_SRCA ((unsigned int) 0x1 << 29) // (CKGR) PLL A Source -// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- -#define AT91C_CKGR_DIVB ((unsigned int) 0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVB_0 ((unsigned int) 0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVB_BYPASS ((unsigned int) 0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLBCOUNT ((unsigned int) 0x3F << 8) // (CKGR) PLL B Counter -#define AT91C_CKGR_OUTB ((unsigned int) 0x3 << 14) // (CKGR) PLL B Output Frequency Range -#define AT91C_CKGR_OUTB_0 ((unsigned int) 0x0 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_1 ((unsigned int) 0x1 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_2 ((unsigned int) 0x2 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_3 ((unsigned int) 0x3 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_MULB ((unsigned int) 0x7FF << 16) // (CKGR) PLL B Multiplier -#define AT91C_CKGR_USB_96M ((unsigned int) 0x1 << 28) // (CKGR) Divider for USB Ports -#define AT91C_CKGR_USB_PLL ((unsigned int) 0x1 << 29) // (CKGR) PLL Use - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Parallel Input Output Controler -// ***************************************************************************** -typedef struct _AT91S_PIO { - AT91_REG PIO_PER; // PIO Enable Register - AT91_REG PIO_PDR; // PIO Disable Register - AT91_REG PIO_PSR; // PIO Status Register - AT91_REG Reserved0[1]; // - AT91_REG PIO_OER; // Output Enable Register - AT91_REG PIO_ODR; // Output Disable Registerr - AT91_REG PIO_OSR; // Output Status Register - AT91_REG Reserved1[1]; // - AT91_REG PIO_IFER; // Input Filter Enable Register - AT91_REG PIO_IFDR; // Input Filter Disable Register - AT91_REG PIO_IFSR; // Input Filter Status Register - AT91_REG Reserved2[1]; // - AT91_REG PIO_SODR; // Set Output Data Register - AT91_REG PIO_CODR; // Clear Output Data Register - AT91_REG PIO_ODSR; // Output Data Status Register - AT91_REG PIO_PDSR; // Pin Data Status Register - AT91_REG PIO_IER; // Interrupt Enable Register - AT91_REG PIO_IDR; // Interrupt Disable Register - AT91_REG PIO_IMR; // Interrupt Mask Register - AT91_REG PIO_ISR; // Interrupt Status Register - AT91_REG PIO_MDER; // Multi-driver Enable Register - AT91_REG PIO_MDDR; // Multi-driver Disable Register - AT91_REG PIO_MDSR; // Multi-driver Status Register - AT91_REG Reserved3[1]; // - AT91_REG PIO_PPUDR; // Pull-up Disable Register - AT91_REG PIO_PPUER; // Pull-up Enable Register - AT91_REG PIO_PPUSR; // Pad Pull-up Status Register - AT91_REG Reserved4[1]; // - AT91_REG PIO_ASR; // Select A Register - AT91_REG PIO_BSR; // Select B Register - AT91_REG PIO_ABSR; // AB Select Status Register - AT91_REG Reserved5[9]; // - AT91_REG PIO_OWER; // Output Write Enable Register - AT91_REG PIO_OWDR; // Output Write Disable Register - AT91_REG PIO_OWSR; // Output Write Status Register -} AT91S_PIO, *AT91PS_PIO; - - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Debug Unit -// ***************************************************************************** -typedef struct _AT91S_DBGU { - AT91_REG DBGU_CR; // Control Register - AT91_REG DBGU_MR; // Mode Register - AT91_REG DBGU_IER; // Interrupt Enable Register - AT91_REG DBGU_IDR; // Interrupt Disable Register - AT91_REG DBGU_IMR; // Interrupt Mask Register - AT91_REG DBGU_CSR; // Channel Status Register - AT91_REG DBGU_RHR; // Receiver Holding Register - AT91_REG DBGU_THR; // Transmitter Holding Register - AT91_REG DBGU_BRGR; // Baud Rate Generator Register - AT91_REG Reserved0[7]; // - AT91_REG DBGU_C1R; // Chip ID1 Register - AT91_REG DBGU_C2R; // Chip ID2 Register - AT91_REG DBGU_FNTR; // Force NTRST Register - AT91_REG Reserved1[45]; // - AT91_REG DBGU_RPR; // Receive Pointer Register - AT91_REG DBGU_RCR; // Receive Counter Register - AT91_REG DBGU_TPR; // Transmit Pointer Register - AT91_REG DBGU_TCR; // Transmit Counter Register - AT91_REG DBGU_RNPR; // Receive Next Pointer Register - AT91_REG DBGU_RNCR; // Receive Next Counter Register - AT91_REG DBGU_TNPR; // Transmit Next Pointer Register - AT91_REG DBGU_TNCR; // Transmit Next Counter Register - AT91_REG DBGU_PTCR; // PDC Transfer Control Register - AT91_REG DBGU_PTSR; // PDC Transfer Status Register -} AT91S_DBGU, *AT91PS_DBGU; - -// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) // (DBGU) Reset Receiver -#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) // (DBGU) Reset Transmitter -#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) // (DBGU) Receiver Enable -#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) // (DBGU) Receiver Disable -#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) // (DBGU) Transmitter Enable -#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) // (DBGU) Transmitter Disable -// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_PAR ((unsigned int) 0x7 << 9) // (DBGU) Parity type -#define AT91C_US_PAR_EVEN ((unsigned int) 0x0 << 9) // (DBGU) Even Parity -#define AT91C_US_PAR_ODD ((unsigned int) 0x1 << 9) // (DBGU) Odd Parity -#define AT91C_US_PAR_SPACE ((unsigned int) 0x2 << 9) // (DBGU) Parity forced to 0 (Space) -#define AT91C_US_PAR_MARK ((unsigned int) 0x3 << 9) // (DBGU) Parity forced to 1 (Mark) -#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) // (DBGU) No Parity -#define AT91C_US_PAR_MULTI_DROP ((unsigned int) 0x6 << 9) // (DBGU) Multi-drop mode -#define AT91C_US_CHMODE ((unsigned int) 0x3 << 14) // (DBGU) Channel Mode -#define AT91C_US_CHMODE_NORMAL ((unsigned int) 0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. -#define AT91C_US_CHMODE_AUTO ((unsigned int) 0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. -#define AT91C_US_CHMODE_LOCAL ((unsigned int) 0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. -#define AT91C_US_CHMODE_REMOTE ((unsigned int) 0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. -// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) // (DBGU) RXRDY Interrupt -#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) // (DBGU) TXRDY Interrupt -#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) // (DBGU) End of Receive Transfer Interrupt -#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) // (DBGU) End of Transmit Interrupt -#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) // (DBGU) Overrun Interrupt -#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) // (DBGU) Framing Error Interrupt -#define AT91C_US_PARE ((unsigned int) 0x1 << 7) // (DBGU) Parity Error Interrupt -#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) // (DBGU) TXEMPTY Interrupt -#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) // (DBGU) TXBUFE Interrupt -#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) // (DBGU) RXBUFF Interrupt -#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) // (DBGU) COMM_TX Interrupt -#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) // (DBGU) COMM_RX Interrupt -// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- -// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- -#define AT91C_US_FORCE_NTRST ((unsigned int) 0x1 << 0) // (DBGU) Force NTRST in JTAG - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Peripheral Data Controller -// ***************************************************************************** -typedef struct _AT91S_PDC { - AT91_REG PDC_RPR; // Receive Pointer Register - AT91_REG PDC_RCR; // Receive Counter Register - AT91_REG PDC_TPR; // Transmit Pointer Register - AT91_REG PDC_TCR; // Transmit Counter Register - AT91_REG PDC_RNPR; // Receive Next Pointer Register - AT91_REG PDC_RNCR; // Receive Next Counter Register - AT91_REG PDC_TNPR; // Transmit Next Pointer Register - AT91_REG PDC_TNCR; // Transmit Next Counter Register - AT91_REG PDC_PTCR; // PDC Transfer Control Register - AT91_REG PDC_PTSR; // PDC Transfer Status Register -} AT91S_PDC, *AT91PS_PDC; - -// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- -#define AT91C_PDC_RXTEN ((unsigned int) 0x1 << 0) // (PDC) Receiver Transfer Enable -#define AT91C_PDC_RXTDIS ((unsigned int) 0x1 << 1) // (PDC) Receiver Transfer Disable -#define AT91C_PDC_TXTEN ((unsigned int) 0x1 << 8) // (PDC) Transmitter Transfer Enable -#define AT91C_PDC_TXTDIS ((unsigned int) 0x1 << 9) // (PDC) Transmitter Transfer Disable -// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller -// ***************************************************************************** -typedef struct _AT91S_AIC { - AT91_REG AIC_SMR[32]; // Source Mode Register - AT91_REG AIC_SVR[32]; // Source Vector Register - AT91_REG AIC_IVR; // IRQ Vector Register - AT91_REG AIC_FVR; // FIQ Vector Register - AT91_REG AIC_ISR; // Interrupt Status Register - AT91_REG AIC_IPR; // Interrupt Pending Register - AT91_REG AIC_IMR; // Interrupt Mask Register - AT91_REG AIC_CISR; // Core Interrupt Status Register - AT91_REG Reserved0[2]; // - AT91_REG AIC_IECR; // Interrupt Enable Command Register - AT91_REG AIC_IDCR; // Interrupt Disable Command Register - AT91_REG AIC_ICCR; // Interrupt Clear Command Register - AT91_REG AIC_ISCR; // Interrupt Set Command Register - AT91_REG AIC_EOICR; // End of Interrupt Command Register - AT91_REG AIC_SPU; // Spurious Vector Register - AT91_REG AIC_DCR; // Debug Control Register (Protect) - AT91_REG Reserved1[1]; // - AT91_REG AIC_FFER; // Fast Forcing Enable Register - AT91_REG AIC_FFDR; // Fast Forcing Disable Register - AT91_REG AIC_FFSR; // Fast Forcing Status Register -} AT91S_AIC, *AT91PS_AIC; - -// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- -#define AT91C_AIC_PRIOR ((unsigned int) 0x7 << 0) // (AIC) Priority Level -#define AT91C_AIC_PRIOR_LOWEST ((unsigned int) 0x0) // (AIC) Lowest priority level -#define AT91C_AIC_PRIOR_HIGHEST ((unsigned int) 0x7) // (AIC) Highest priority level -#define AT91C_AIC_SRCTYPE ((unsigned int) 0x3 << 5) // (AIC) Interrupt Source Type -#define AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE ((unsigned int) 0x0 << 5) // (AIC) Internal Sources Code Label Level Sensitive -#define AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED ((unsigned int) 0x1 << 5) // (AIC) Internal Sources Code Label Edge triggered -#define AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL ((unsigned int) 0x2 << 5) // (AIC) External Sources Code Label High-level Sensitive -#define AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE ((unsigned int) 0x3 << 5) // (AIC) External Sources Code Label Positive Edge triggered -// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- -#define AT91C_AIC_NFIQ ((unsigned int) 0x1 << 0) // (AIC) NFIQ Status -#define AT91C_AIC_NIRQ ((unsigned int) 0x1 << 1) // (AIC) NIRQ Status -// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- -#define AT91C_AIC_DCR_PROT ((unsigned int) 0x1 << 0) // (AIC) Protection Mode -#define AT91C_AIC_DCR_GMSK ((unsigned int) 0x1 << 1) // (AIC) General Mask - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Serial Parallel Interface -// ***************************************************************************** -typedef struct _AT91S_SPI { - AT91_REG SPI_CR; // Control Register - AT91_REG SPI_MR; // Mode Register - AT91_REG SPI_RDR; // Receive Data Register - AT91_REG SPI_TDR; // Transmit Data Register - AT91_REG SPI_SR; // Status Register - AT91_REG SPI_IER; // Interrupt Enable Register - AT91_REG SPI_IDR; // Interrupt Disable Register - AT91_REG SPI_IMR; // Interrupt Mask Register - AT91_REG Reserved0[4]; // - AT91_REG SPI_CSR[4]; // Chip Select Register - AT91_REG Reserved1[48]; // - AT91_REG SPI_RPR; // Receive Pointer Register - AT91_REG SPI_RCR; // Receive Counter Register - AT91_REG SPI_TPR; // Transmit Pointer Register - AT91_REG SPI_TCR; // Transmit Counter Register - AT91_REG SPI_RNPR; // Receive Next Pointer Register - AT91_REG SPI_RNCR; // Receive Next Counter Register - AT91_REG SPI_TNPR; // Transmit Next Pointer Register - AT91_REG SPI_TNCR; // Transmit Next Counter Register - AT91_REG SPI_PTCR; // PDC Transfer Control Register - AT91_REG SPI_PTSR; // PDC Transfer Status Register -} AT91S_SPI, *AT91PS_SPI; - -// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- -#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) // (SPI) SPI Enable -#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) // (SPI) SPI Disable -#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) // (SPI) SPI Software reset -// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- -#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) // (SPI) Master/Slave Mode -#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) // (SPI) Peripheral Select -#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) // (SPI) Fixed Peripheral Select -#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) // (SPI) Variable Peripheral Select -#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) // (SPI) Chip Select Decode -#define AT91C_SPI_DIV32 ((unsigned int) 0x1 << 3) // (SPI) Clock Selection -#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) // (SPI) Mode Fault Detection -#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) // (SPI) Clock Selection -#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select -#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) // (SPI) Delay Between Chip Selects -// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- -#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) // (SPI) Receive Data -#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- -#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) // (SPI) Transmit Data -#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- -#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) // (SPI) Receive Data Register Full -#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) // (SPI) Transmit Data Register Empty -#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) // (SPI) Mode Fault Error -#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) // (SPI) Overrun Error Status -#define AT91C_SPI_SPENDRX ((unsigned int) 0x1 << 4) // (SPI) End of Receiver Transfer -#define AT91C_SPI_SPENDTX ((unsigned int) 0x1 << 5) // (SPI) End of Receiver Transfer -#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) // (SPI) RXBUFF Interrupt -#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) // (SPI) TXBUFE Interrupt -#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) // (SPI) Enable Status -// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- -// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- -// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- -// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- -#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) // (SPI) Clock Polarity -#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) // (SPI) Clock Phase -#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) // (SPI) Bits Per Transfer -#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) // (SPI) 8 Bits Per transfer -#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) // (SPI) 9 Bits Per transfer -#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) // (SPI) 10 Bits Per transfer -#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) // (SPI) 11 Bits Per transfer -#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) // (SPI) 12 Bits Per transfer -#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) // (SPI) 13 Bits Per transfer -#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) // (SPI) 14 Bits Per transfer -#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) // (SPI) 15 Bits Per transfer -#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) // (SPI) 16 Bits Per transfer -#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) // (SPI) Delay Between Consecutive Transfers - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface -// ***************************************************************************** -typedef struct _AT91S_SSC { - AT91_REG SSC_CR; // Control Register - AT91_REG SSC_CMR; // Clock Mode Register - AT91_REG Reserved0[2]; // - AT91_REG SSC_RCMR; // Receive Clock ModeRegister - AT91_REG SSC_RFMR; // Receive Frame Mode Register - AT91_REG SSC_TCMR; // Transmit Clock Mode Register - AT91_REG SSC_TFMR; // Transmit Frame Mode Register - AT91_REG SSC_RHR; // Receive Holding Register - AT91_REG SSC_THR; // Transmit Holding Register - AT91_REG Reserved1[2]; // - AT91_REG SSC_RSHR; // Receive Sync Holding Register - AT91_REG SSC_TSHR; // Transmit Sync Holding Register - AT91_REG SSC_RC0R; // Receive Compare 0 Register - AT91_REG SSC_RC1R; // Receive Compare 1 Register - AT91_REG SSC_SR; // Status Register - AT91_REG SSC_IER; // Interrupt Enable Register - AT91_REG SSC_IDR; // Interrupt Disable Register - AT91_REG SSC_IMR; // Interrupt Mask Register - AT91_REG Reserved2[44]; // - AT91_REG SSC_RPR; // Receive Pointer Register - AT91_REG SSC_RCR; // Receive Counter Register - AT91_REG SSC_TPR; // Transmit Pointer Register - AT91_REG SSC_TCR; // Transmit Counter Register - AT91_REG SSC_RNPR; // Receive Next Pointer Register - AT91_REG SSC_RNCR; // Receive Next Counter Register - AT91_REG SSC_TNPR; // Transmit Next Pointer Register - AT91_REG SSC_TNCR; // Transmit Next Counter Register - AT91_REG SSC_PTCR; // PDC Transfer Control Register - AT91_REG SSC_PTSR; // PDC Transfer Status Register -} AT91S_SSC, *AT91PS_SSC; - -// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- -#define AT91C_SSC_RXEN ((unsigned int) 0x1 << 0) // (SSC) Receive Enable -#define AT91C_SSC_RXDIS ((unsigned int) 0x1 << 1) // (SSC) Receive Disable -#define AT91C_SSC_TXEN ((unsigned int) 0x1 << 8) // (SSC) Transmit Enable -#define AT91C_SSC_TXDIS ((unsigned int) 0x1 << 9) // (SSC) Transmit Disable -#define AT91C_SSC_SWRST ((unsigned int) 0x1 << 15) // (SSC) Software Reset -// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- -#define AT91C_SSC_CKS ((unsigned int) 0x3 << 0) // (SSC) Receive/Transmit Clock Selection -#define AT91C_SSC_CKS_DIV ((unsigned int) 0x0) // (SSC) Divided Clock -#define AT91C_SSC_CKS_TK ((unsigned int) 0x1) // (SSC) TK Clock signal -#define AT91C_SSC_CKS_RK ((unsigned int) 0x2) // (SSC) RK pin -#define AT91C_SSC_CKO ((unsigned int) 0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection -#define AT91C_SSC_CKO_NONE ((unsigned int) 0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only -#define AT91C_SSC_CKO_CONTINOUS ((unsigned int) 0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output -#define AT91C_SSC_CKO_DATA_TX ((unsigned int) 0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output -#define AT91C_SSC_CKI ((unsigned int) 0x1 << 5) // (SSC) Receive/Transmit Clock Inversion -#define AT91C_SSC_CKG ((unsigned int) 0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection -#define AT91C_SSC_CKG_NONE ((unsigned int) 0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock -#define AT91C_SSC_CKG_LOW ((unsigned int) 0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low -#define AT91C_SSC_CKG_HIGH ((unsigned int) 0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High -#define AT91C_SSC_START ((unsigned int) 0xF << 8) // (SSC) Receive/Transmit Start Selection -#define AT91C_SSC_START_CONTINOUS ((unsigned int) 0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. -#define AT91C_SSC_START_TX ((unsigned int) 0x1 << 8) // (SSC) Transmit/Receive start -#define AT91C_SSC_START_LOW_RF ((unsigned int) 0x2 << 8) // (SSC) Detection of a low level on RF input -#define AT91C_SSC_START_HIGH_RF ((unsigned int) 0x3 << 8) // (SSC) Detection of a high level on RF input -#define AT91C_SSC_START_FALL_RF ((unsigned int) 0x4 << 8) // (SSC) Detection of a falling edge on RF input -#define AT91C_SSC_START_RISE_RF ((unsigned int) 0x5 << 8) // (SSC) Detection of a rising edge on RF input -#define AT91C_SSC_START_LEVEL_RF ((unsigned int) 0x6 << 8) // (SSC) Detection of any level change on RF input -#define AT91C_SSC_START_EDGE_RF ((unsigned int) 0x7 << 8) // (SSC) Detection of any edge on RF input -#define AT91C_SSC_START_0 ((unsigned int) 0x8 << 8) // (SSC) Compare 0 -#define AT91C_SSC_STOP ((unsigned int) 0x1 << 12) // (SSC) Receive Stop Selection -#define AT91C_SSC_STTOUT ((unsigned int) 0x1 << 15) // (SSC) Receive/Transmit Start Output Selection -#define AT91C_SSC_STTDLY ((unsigned int) 0xFF << 16) // (SSC) Receive/Transmit Start Delay -#define AT91C_SSC_PERIOD ((unsigned int) 0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection -// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- -#define AT91C_SSC_DATLEN ((unsigned int) 0x1F << 0) // (SSC) Data Length -#define AT91C_SSC_LOOP ((unsigned int) 0x1 << 5) // (SSC) Loop Mode -#define AT91C_SSC_MSBF ((unsigned int) 0x1 << 7) // (SSC) Most Significant Bit First -#define AT91C_SSC_DATNB ((unsigned int) 0xF << 8) // (SSC) Data Number per Frame -#define AT91C_SSC_FSLEN ((unsigned int) 0xF << 16) // (SSC) Receive/Transmit Frame Sync length -#define AT91C_SSC_FSOS ((unsigned int) 0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection -#define AT91C_SSC_FSOS_NONE ((unsigned int) 0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only -#define AT91C_SSC_FSOS_NEGATIVE ((unsigned int) 0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse -#define AT91C_SSC_FSOS_POSITIVE ((unsigned int) 0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse -#define AT91C_SSC_FSOS_LOW ((unsigned int) 0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer -#define AT91C_SSC_FSOS_HIGH ((unsigned int) 0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer -#define AT91C_SSC_FSOS_TOGGLE ((unsigned int) 0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer -#define AT91C_SSC_FSEDGE ((unsigned int) 0x1 << 24) // (SSC) Frame Sync Edge Detection -// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- -// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- -#define AT91C_SSC_DATDEF ((unsigned int) 0x1 << 5) // (SSC) Data Default Value -#define AT91C_SSC_FSDEN ((unsigned int) 0x1 << 23) // (SSC) Frame Sync Data Enable -// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- -#define AT91C_SSC_TXRDY ((unsigned int) 0x1 << 0) // (SSC) Transmit Ready -#define AT91C_SSC_TXEMPTY ((unsigned int) 0x1 << 1) // (SSC) Transmit Empty -#define AT91C_SSC_ENDTX ((unsigned int) 0x1 << 2) // (SSC) End Of Transmission -#define AT91C_SSC_TXBUFE ((unsigned int) 0x1 << 3) // (SSC) Transmit Buffer Empty -#define AT91C_SSC_RXRDY ((unsigned int) 0x1 << 4) // (SSC) Receive Ready -#define AT91C_SSC_OVRUN ((unsigned int) 0x1 << 5) // (SSC) Receive Overrun -#define AT91C_SSC_ENDRX ((unsigned int) 0x1 << 6) // (SSC) End of Reception -#define AT91C_SSC_RXBUFF ((unsigned int) 0x1 << 7) // (SSC) Receive Buffer Full -#define AT91C_SSC_CP0 ((unsigned int) 0x1 << 8) // (SSC) Compare 0 -#define AT91C_SSC_CP1 ((unsigned int) 0x1 << 9) // (SSC) Compare 1 -#define AT91C_SSC_TXSYN ((unsigned int) 0x1 << 10) // (SSC) Transmit Sync -#define AT91C_SSC_RXSYN ((unsigned int) 0x1 << 11) // (SSC) Receive Sync -#define AT91C_SSC_TXENA ((unsigned int) 0x1 << 16) // (SSC) Transmit Enable -#define AT91C_SSC_RXENA ((unsigned int) 0x1 << 17) // (SSC) Receive Enable -// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- -// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- -// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Usart -// ***************************************************************************** -typedef struct _AT91S_USART { - AT91_REG US_CR; // Control Register - AT91_REG US_MR; // Mode Register - AT91_REG US_IER; // Interrupt Enable Register - AT91_REG US_IDR; // Interrupt Disable Register - AT91_REG US_IMR; // Interrupt Mask Register - AT91_REG US_CSR; // Channel Status Register - AT91_REG US_RHR; // Receiver Holding Register - AT91_REG US_THR; // Transmitter Holding Register - AT91_REG US_BRGR; // Baud Rate Generator Register - AT91_REG US_RTOR; // Receiver Time-out Register - AT91_REG US_TTGR; // Transmitter Time-guard Register - AT91_REG Reserved0[5]; // - AT91_REG US_FIDI; // FI_DI_Ratio Register - AT91_REG US_NER; // Nb Errors Register - AT91_REG US_XXR; // XON_XOFF Register - AT91_REG US_IF; // IRDA_FILTER Register - AT91_REG Reserved1[44]; // - AT91_REG US_RPR; // Receive Pointer Register - AT91_REG US_RCR; // Receive Counter Register - AT91_REG US_TPR; // Transmit Pointer Register - AT91_REG US_TCR; // Transmit Counter Register - AT91_REG US_RNPR; // Receive Next Pointer Register - AT91_REG US_RNCR; // Receive Next Counter Register - AT91_REG US_TNPR; // Transmit Next Pointer Register - AT91_REG US_TNCR; // Transmit Next Counter Register - AT91_REG US_PTCR; // PDC Transfer Control Register - AT91_REG US_PTSR; // PDC Transfer Status Register -} AT91S_USART, *AT91PS_USART; - -// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTSTA ((unsigned int) 0x1 << 8) // (USART) Reset Status Bits -#define AT91C_US_STTBRK ((unsigned int) 0x1 << 9) // (USART) Start Break -#define AT91C_US_STPBRK ((unsigned int) 0x1 << 10) // (USART) Stop Break -#define AT91C_US_STTTO ((unsigned int) 0x1 << 11) // (USART) Start Time-out -#define AT91C_US_SENDA ((unsigned int) 0x1 << 12) // (USART) Send Address -#define AT91C_US_RSTIT ((unsigned int) 0x1 << 13) // (USART) Reset Iterations -#define AT91C_US_RSTNACK ((unsigned int) 0x1 << 14) // (USART) Reset Non Acknowledge -#define AT91C_US_RETTO ((unsigned int) 0x1 << 15) // (USART) Rearm Time-out -#define AT91C_US_DTREN ((unsigned int) 0x1 << 16) // (USART) Data Terminal ready Enable -#define AT91C_US_DTRDIS ((unsigned int) 0x1 << 17) // (USART) Data Terminal ready Disable -#define AT91C_US_RTSEN ((unsigned int) 0x1 << 18) // (USART) Request to Send enable -#define AT91C_US_RTSDIS ((unsigned int) 0x1 << 19) // (USART) Request to Send Disable -// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_USMODE ((unsigned int) 0xF << 0) // (USART) Usart mode -#define AT91C_US_USMODE_NORMAL ((unsigned int) 0x0) // (USART) Normal -#define AT91C_US_USMODE_RS485 ((unsigned int) 0x1) // (USART) RS485 -#define AT91C_US_USMODE_HWHSH ((unsigned int) 0x2) // (USART) Hardware Handshaking -#define AT91C_US_USMODE_MODEM ((unsigned int) 0x3) // (USART) Modem -#define AT91C_US_USMODE_ISO7816_0 ((unsigned int) 0x4) // (USART) ISO7816 protocol: T = 0 -#define AT91C_US_USMODE_ISO7816_1 ((unsigned int) 0x6) // (USART) ISO7816 protocol: T = 1 -#define AT91C_US_USMODE_IRDA ((unsigned int) 0x8) // (USART) IrDA -#define AT91C_US_USMODE_SWHSH ((unsigned int) 0xC) // (USART) Software Handshaking -#define AT91C_US_CLKS ((unsigned int) 0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) // (USART) Clock -#define AT91C_US_CLKS_FDIV1 ((unsigned int) 0x1 << 4) // (USART) fdiv1 -#define AT91C_US_CLKS_SLOW ((unsigned int) 0x2 << 4) // (USART) slow_clock (ARM) -#define AT91C_US_CLKS_EXT ((unsigned int) 0x3 << 4) // (USART) External (SCK) -#define AT91C_US_CHRL ((unsigned int) 0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CHRL_5_BITS ((unsigned int) 0x0 << 6) // (USART) Character Length: 5 bits -#define AT91C_US_CHRL_6_BITS ((unsigned int) 0x1 << 6) // (USART) Character Length: 6 bits -#define AT91C_US_CHRL_7_BITS ((unsigned int) 0x2 << 6) // (USART) Character Length: 7 bits -#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) // (USART) Character Length: 8 bits -#define AT91C_US_SYNC ((unsigned int) 0x1 << 8) // (USART) Synchronous Mode Select -#define AT91C_US_NBSTOP ((unsigned int) 0x3 << 12) // (USART) Number of Stop bits -#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) // (USART) 1 stop bit -#define AT91C_US_NBSTOP_15_BIT ((unsigned int) 0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits -#define AT91C_US_NBSTOP_2_BIT ((unsigned int) 0x2 << 12) // (USART) 2 stop bits -#define AT91C_US_MSBF ((unsigned int) 0x1 << 16) // (USART) Bit Order -#define AT91C_US_MODE9 ((unsigned int) 0x1 << 17) // (USART) 9-bit Character length -#define AT91C_US_CKLO ((unsigned int) 0x1 << 18) // (USART) Clock Output Select -#define AT91C_US_OVER ((unsigned int) 0x1 << 19) // (USART) Over Sampling Mode -#define AT91C_US_INACK ((unsigned int) 0x1 << 20) // (USART) Inhibit Non Acknowledge -#define AT91C_US_DSNACK ((unsigned int) 0x1 << 21) // (USART) Disable Successive NACK -#define AT91C_US_MAX_ITER ((unsigned int) 0x1 << 24) // (USART) Number of Repetitions -#define AT91C_US_FILTER ((unsigned int) 0x1 << 28) // (USART) Receive Line Filter -// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXBRK ((unsigned int) 0x1 << 2) // (USART) Break Received/End of Break -#define AT91C_US_TIMEOUT ((unsigned int) 0x1 << 8) // (USART) Receiver Time-out -#define AT91C_US_ITERATION ((unsigned int) 0x1 << 10) // (USART) Max number of Repetitions Reached -#define AT91C_US_NACK ((unsigned int) 0x1 << 13) // (USART) Non Acknowledge -#define AT91C_US_RIIC ((unsigned int) 0x1 << 16) // (USART) Ring INdicator Input Change Flag -#define AT91C_US_DSRIC ((unsigned int) 0x1 << 17) // (USART) Data Set Ready Input Change Flag -#define AT91C_US_DCDIC ((unsigned int) 0x1 << 18) // (USART) Data Carrier Flag -#define AT91C_US_CTSIC ((unsigned int) 0x1 << 19) // (USART) Clear To Send Input Change Flag -// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- -#define AT91C_US_RI ((unsigned int) 0x1 << 20) // (USART) Image of RI Input -#define AT91C_US_DSR ((unsigned int) 0x1 << 21) // (USART) Image of DSR Input -#define AT91C_US_DCD ((unsigned int) 0x1 << 22) // (USART) Image of DCD Input -#define AT91C_US_CTS ((unsigned int) 0x1 << 23) // (USART) Image of CTS Input - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Two-wire Interface -// ***************************************************************************** -typedef struct _AT91S_TWI { - AT91_REG TWI_CR; // Control Register - AT91_REG TWI_MMR; // Master Mode Register - AT91_REG TWI_SMR; // Slave Mode Register - AT91_REG TWI_IADR; // Internal Address Register - AT91_REG TWI_CWGR; // Clock Waveform Generator Register - AT91_REG Reserved0[3]; // - AT91_REG TWI_SR; // Status Register - AT91_REG TWI_IER; // Interrupt Enable Register - AT91_REG TWI_IDR; // Interrupt Disable Register - AT91_REG TWI_IMR; // Interrupt Mask Register - AT91_REG TWI_RHR; // Receive Holding Register - AT91_REG TWI_THR; // Transmit Holding Register -} AT91S_TWI, *AT91PS_TWI; - -// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- -#define AT91C_TWI_START ((unsigned int) 0x1 << 0) // (TWI) Send a START Condition -#define AT91C_TWI_STOP ((unsigned int) 0x1 << 1) // (TWI) Send a STOP Condition -#define AT91C_TWI_MSEN ((unsigned int) 0x1 << 2) // (TWI) TWI Master Transfer Enabled -#define AT91C_TWI_MSDIS ((unsigned int) 0x1 << 3) // (TWI) TWI Master Transfer Disabled -#define AT91C_TWI_SVEN ((unsigned int) 0x1 << 4) // (TWI) TWI Slave Transfer Enabled -#define AT91C_TWI_SVDIS ((unsigned int) 0x1 << 5) // (TWI) TWI Slave Transfer Disabled -#define AT91C_TWI_SWRST ((unsigned int) 0x1 << 7) // (TWI) Software Reset -// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- -#define AT91C_TWI_IADRSZ ((unsigned int) 0x3 << 8) // (TWI) Internal Device Address Size -#define AT91C_TWI_IADRSZ_NO ((unsigned int) 0x0 << 8) // (TWI) No internal device address -#define AT91C_TWI_IADRSZ_1_BYTE ((unsigned int) 0x1 << 8) // (TWI) One-byte internal device address -#define AT91C_TWI_IADRSZ_2_BYTE ((unsigned int) 0x2 << 8) // (TWI) Two-byte internal device address -#define AT91C_TWI_IADRSZ_3_BYTE ((unsigned int) 0x3 << 8) // (TWI) Three-byte internal device address -#define AT91C_TWI_MREAD ((unsigned int) 0x1 << 12) // (TWI) Master Read Direction -#define AT91C_TWI_DADR ((unsigned int) 0x7F << 16) // (TWI) Device Address -// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- -#define AT91C_TWI_SADR ((unsigned int) 0x7F << 16) // (TWI) Slave Device Address -// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- -#define AT91C_TWI_CLDIV ((unsigned int) 0xFF << 0) // (TWI) Clock Low Divider -#define AT91C_TWI_CHDIV ((unsigned int) 0xFF << 8) // (TWI) Clock High Divider -#define AT91C_TWI_CKDIV ((unsigned int) 0x7 << 16) // (TWI) Clock Divider -// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- -#define AT91C_TWI_TXCOMP ((unsigned int) 0x1 << 0) // (TWI) Transmission Completed -#define AT91C_TWI_RXRDY ((unsigned int) 0x1 << 1) // (TWI) Receive holding register ReaDY -#define AT91C_TWI_TXRDY ((unsigned int) 0x1 << 2) // (TWI) Transmit holding register ReaDY -#define AT91C_TWI_SVREAD ((unsigned int) 0x1 << 3) // (TWI) Slave Read -#define AT91C_TWI_SVACC ((unsigned int) 0x1 << 4) // (TWI) Slave Access -#define AT91C_TWI_GCACC ((unsigned int) 0x1 << 5) // (TWI) General Call Access -#define AT91C_TWI_OVRE ((unsigned int) 0x1 << 6) // (TWI) Overrun Error -#define AT91C_TWI_UNRE ((unsigned int) 0x1 << 7) // (TWI) Underrun Error -#define AT91C_TWI_NACK ((unsigned int) 0x1 << 8) // (TWI) Not Acknowledged -#define AT91C_TWI_ARBLST ((unsigned int) 0x1 << 9) // (TWI) Arbitration Lost -// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- -// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- -// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Multimedia Card Interface -// ***************************************************************************** -typedef struct _AT91S_MCI { - AT91_REG MCI_CR; // MCI Control Register - AT91_REG MCI_MR; // MCI Mode Register - AT91_REG MCI_DTOR; // MCI Data Timeout Register - AT91_REG MCI_SDCR; // MCI SD Card Register - AT91_REG MCI_ARGR; // MCI Argument Register - AT91_REG MCI_CMDR; // MCI Command Register - AT91_REG Reserved0[2]; // - AT91_REG MCI_RSPR[4]; // MCI Response Register - AT91_REG MCI_RDR; // MCI Receive Data Register - AT91_REG MCI_TDR; // MCI Transmit Data Register - AT91_REG Reserved1[2]; // - AT91_REG MCI_SR; // MCI Status Register - AT91_REG MCI_IER; // MCI Interrupt Enable Register - AT91_REG MCI_IDR; // MCI Interrupt Disable Register - AT91_REG MCI_IMR; // MCI Interrupt Mask Register - AT91_REG Reserved2[44]; // - AT91_REG MCI_RPR; // Receive Pointer Register - AT91_REG MCI_RCR; // Receive Counter Register - AT91_REG MCI_TPR; // Transmit Pointer Register - AT91_REG MCI_TCR; // Transmit Counter Register - AT91_REG MCI_RNPR; // Receive Next Pointer Register - AT91_REG MCI_RNCR; // Receive Next Counter Register - AT91_REG MCI_TNPR; // Transmit Next Pointer Register - AT91_REG MCI_TNCR; // Transmit Next Counter Register - AT91_REG MCI_PTCR; // PDC Transfer Control Register - AT91_REG MCI_PTSR; // PDC Transfer Status Register -} AT91S_MCI, *AT91PS_MCI; - -// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- -#define AT91C_MCI_MCIEN ((unsigned int) 0x1 << 0) // (MCI) Multimedia Interface Enable -#define AT91C_MCI_MCIDIS ((unsigned int) 0x1 << 1) // (MCI) Multimedia Interface Disable -#define AT91C_MCI_PWSEN ((unsigned int) 0x1 << 2) // (MCI) Power Save Mode Enable -#define AT91C_MCI_PWSDIS ((unsigned int) 0x1 << 3) // (MCI) Power Save Mode Disable -// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- -#define AT91C_MCI_CLKDIV ((unsigned int) 0x1 << 0) // (MCI) Clock Divider -#define AT91C_MCI_PWSDIV ((unsigned int) 0x1 << 8) // (MCI) Power Saving Divider -#define AT91C_MCI_PDCPADV ((unsigned int) 0x1 << 14) // (MCI) PDC Padding Value -#define AT91C_MCI_PDCMODE ((unsigned int) 0x1 << 15) // (MCI) PDC Oriented Mode -#define AT91C_MCI_BLKLEN ((unsigned int) 0x1 << 18) // (MCI) Data Block Length -// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- -#define AT91C_MCI_DTOCYC ((unsigned int) 0x1 << 0) // (MCI) Data Timeout Cycle Number -#define AT91C_MCI_DTOMUL ((unsigned int) 0x7 << 4) // (MCI) Data Timeout Multiplier -#define AT91C_MCI_DTOMUL_1 ((unsigned int) 0x0 << 4) // (MCI) DTOCYC x 1 -#define AT91C_MCI_DTOMUL_16 ((unsigned int) 0x1 << 4) // (MCI) DTOCYC x 16 -#define AT91C_MCI_DTOMUL_128 ((unsigned int) 0x2 << 4) // (MCI) DTOCYC x 128 -#define AT91C_MCI_DTOMUL_256 ((unsigned int) 0x3 << 4) // (MCI) DTOCYC x 256 -#define AT91C_MCI_DTOMUL_1024 ((unsigned int) 0x4 << 4) // (MCI) DTOCYC x 1024 -#define AT91C_MCI_DTOMUL_4096 ((unsigned int) 0x5 << 4) // (MCI) DTOCYC x 4096 -#define AT91C_MCI_DTOMUL_65536 ((unsigned int) 0x6 << 4) // (MCI) DTOCYC x 65536 -#define AT91C_MCI_DTOMUL_1048576 ((unsigned int) 0x7 << 4) // (MCI) DTOCYC x 1048576 -// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- -#define AT91C_MCI_SCDSEL ((unsigned int) 0x1 << 0) // (MCI) SD Card Selector -#define AT91C_MCI_SCDBUS ((unsigned int) 0x1 << 7) // (MCI) SD Card Bus Width -// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- -#define AT91C_MCI_CMDNB ((unsigned int) 0x1F << 0) // (MCI) Command Number -#define AT91C_MCI_RSPTYP ((unsigned int) 0x3 << 6) // (MCI) Response Type -#define AT91C_MCI_RSPTYP_NO ((unsigned int) 0x0 << 6) // (MCI) No response -#define AT91C_MCI_RSPTYP_48 ((unsigned int) 0x1 << 6) // (MCI) 48-bit response -#define AT91C_MCI_RSPTYP_136 ((unsigned int) 0x2 << 6) // (MCI) 136-bit response -#define AT91C_MCI_SPCMD ((unsigned int) 0x7 << 8) // (MCI) Special CMD -#define AT91C_MCI_SPCMD_NONE ((unsigned int) 0x0 << 8) // (MCI) Not a special CMD -#define AT91C_MCI_SPCMD_INIT ((unsigned int) 0x1 << 8) // (MCI) Initialization CMD -#define AT91C_MCI_SPCMD_SYNC ((unsigned int) 0x2 << 8) // (MCI) Synchronized CMD -#define AT91C_MCI_SPCMD_IT_CMD ((unsigned int) 0x4 << 8) // (MCI) Interrupt command -#define AT91C_MCI_SPCMD_IT_REP ((unsigned int) 0x5 << 8) // (MCI) Interrupt response -#define AT91C_MCI_OPDCMD ((unsigned int) 0x1 << 11) // (MCI) Open Drain Command -#define AT91C_MCI_MAXLAT ((unsigned int) 0x1 << 12) // (MCI) Maximum Latency for Command to respond -#define AT91C_MCI_TRCMD ((unsigned int) 0x3 << 16) // (MCI) Transfer CMD -#define AT91C_MCI_TRCMD_NO ((unsigned int) 0x0 << 16) // (MCI) No transfer -#define AT91C_MCI_TRCMD_START ((unsigned int) 0x1 << 16) // (MCI) Start transfer -#define AT91C_MCI_TRCMD_STOP ((unsigned int) 0x2 << 16) // (MCI) Stop transfer -#define AT91C_MCI_TRDIR ((unsigned int) 0x1 << 18) // (MCI) Transfer Direction -#define AT91C_MCI_TRTYP ((unsigned int) 0x3 << 19) // (MCI) Transfer Type -#define AT91C_MCI_TRTYP_BLOCK ((unsigned int) 0x0 << 19) // (MCI) Block Transfer type -#define AT91C_MCI_TRTYP_MULTIPLE ((unsigned int) 0x1 << 19) // (MCI) Multiple Block transfer type -#define AT91C_MCI_TRTYP_STREAM ((unsigned int) 0x2 << 19) // (MCI) Stream transfer type -// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- -#define AT91C_MCI_CMDRDY ((unsigned int) 0x1 << 0) // (MCI) Command Ready flag -#define AT91C_MCI_RXRDY ((unsigned int) 0x1 << 1) // (MCI) RX Ready flag -#define AT91C_MCI_TXRDY ((unsigned int) 0x1 << 2) // (MCI) TX Ready flag -#define AT91C_MCI_BLKE ((unsigned int) 0x1 << 3) // (MCI) Data Block Transfer Ended flag -#define AT91C_MCI_DTIP ((unsigned int) 0x1 << 4) // (MCI) Data Transfer in Progress flag -#define AT91C_MCI_NOTBUSY ((unsigned int) 0x1 << 5) // (MCI) Data Line Not Busy flag -#define AT91C_MCI_ENDRX ((unsigned int) 0x1 << 6) // (MCI) End of RX Buffer flag -#define AT91C_MCI_ENDTX ((unsigned int) 0x1 << 7) // (MCI) End of TX Buffer flag -#define AT91C_MCI_RXBUFF ((unsigned int) 0x1 << 14) // (MCI) RX Buffer Full flag -#define AT91C_MCI_TXBUFE ((unsigned int) 0x1 << 15) // (MCI) TX Buffer Empty flag -#define AT91C_MCI_RINDE ((unsigned int) 0x1 << 16) // (MCI) Response Index Error flag -#define AT91C_MCI_RDIRE ((unsigned int) 0x1 << 17) // (MCI) Response Direction Error flag -#define AT91C_MCI_RCRCE ((unsigned int) 0x1 << 18) // (MCI) Response CRC Error flag -#define AT91C_MCI_RENDE ((unsigned int) 0x1 << 19) // (MCI) Response End Bit Error flag -#define AT91C_MCI_RTOE ((unsigned int) 0x1 << 20) // (MCI) Response Time-out Error flag -#define AT91C_MCI_DCRCE ((unsigned int) 0x1 << 21) // (MCI) data CRC Error flag -#define AT91C_MCI_DTOE ((unsigned int) 0x1 << 22) // (MCI) Data timeout Error flag -#define AT91C_MCI_OVRE ((unsigned int) 0x1 << 30) // (MCI) Overrun flag -#define AT91C_MCI_UNRE ((unsigned int) 0x1 << 31) // (MCI) Underrun flag -// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- -// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- -// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Device Interface -// ***************************************************************************** -typedef struct _AT91S_UDP { - AT91_REG UDP_NUM; // Frame Number Register - AT91_REG UDP_GLBSTATE; // Global State Register - AT91_REG UDP_FADDR; // Function Address Register - AT91_REG Reserved0[1]; // - AT91_REG UDP_IER; // Interrupt Enable Register - AT91_REG UDP_IDR; // Interrupt Disable Register - AT91_REG UDP_IMR; // Interrupt Mask Register - AT91_REG UDP_ISR; // Interrupt Status Register - AT91_REG UDP_ICR; // Interrupt Clear Register - AT91_REG Reserved1[1]; // - AT91_REG UDP_RSTEP; // Reset Endpoint Register - AT91_REG Reserved2[1]; // - AT91_REG UDP_CSR[8]; // Endpoint Control and Status Register - AT91_REG UDP_FDR[8]; // Endpoint FIFO Data Register -} AT91S_UDP, *AT91PS_UDP; - -// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- -#define AT91C_UDP_FRM_NUM ((unsigned int) 0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats -#define AT91C_UDP_FRM_ERR ((unsigned int) 0x1 << 16) // (UDP) Frame Error -#define AT91C_UDP_FRM_OK ((unsigned int) 0x1 << 17) // (UDP) Frame OK -// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- -#define AT91C_UDP_FADDEN ((unsigned int) 0x1 << 0) // (UDP) Function Address Enable -#define AT91C_UDP_CONFG ((unsigned int) 0x1 << 1) // (UDP) Configured -#define AT91C_UDP_RMWUPE ((unsigned int) 0x1 << 2) // (UDP) Remote Wake Up Enable -#define AT91C_UDP_RSMINPR ((unsigned int) 0x1 << 3) // (UDP) A Resume Has Been Sent to the Host -// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- -#define AT91C_UDP_FADD ((unsigned int) 0xFF << 0) // (UDP) Function Address Value -#define AT91C_UDP_FEN ((unsigned int) 0x1 << 8) // (UDP) Function Enable -// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- -#define AT91C_UDP_EPINT0 ((unsigned int) 0x1 << 0) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT1 ((unsigned int) 0x1 << 1) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT2 ((unsigned int) 0x1 << 2) // (UDP) Endpoint 2 Interrupt -#define AT91C_UDP_EPINT3 ((unsigned int) 0x1 << 3) // (UDP) Endpoint 3 Interrupt -#define AT91C_UDP_EPINT4 ((unsigned int) 0x1 << 4) // (UDP) Endpoint 4 Interrupt -#define AT91C_UDP_EPINT5 ((unsigned int) 0x1 << 5) // (UDP) Endpoint 5 Interrupt -#define AT91C_UDP_EPINT6 ((unsigned int) 0x1 << 6) // (UDP) Endpoint 6 Interrupt -#define AT91C_UDP_EPINT7 ((unsigned int) 0x1 << 7) // (UDP) Endpoint 7 Interrupt -#define AT91C_UDP_RXSUSP ((unsigned int) 0x1 << 8) // (UDP) USB Suspend Interrupt -#define AT91C_UDP_RXRSM ((unsigned int) 0x1 << 9) // (UDP) USB Resume Interrupt -#define AT91C_UDP_EXTRSM ((unsigned int) 0x1 << 10) // (UDP) USB External Resume Interrupt -#define AT91C_UDP_SOFINT ((unsigned int) 0x1 << 11) // (UDP) USB Start Of frame Interrupt -#define AT91C_UDP_WAKEUP ((unsigned int) 0x1 << 13) // (UDP) USB Resume Interrupt -// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- -// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- -// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- -#define AT91C_UDP_ENDBUSRES ((unsigned int) 0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt -// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- -// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- -#define AT91C_UDP_EP0 ((unsigned int) 0x1 << 0) // (UDP) Reset Endpoint 0 -#define AT91C_UDP_EP1 ((unsigned int) 0x1 << 1) // (UDP) Reset Endpoint 1 -#define AT91C_UDP_EP2 ((unsigned int) 0x1 << 2) // (UDP) Reset Endpoint 2 -#define AT91C_UDP_EP3 ((unsigned int) 0x1 << 3) // (UDP) Reset Endpoint 3 -#define AT91C_UDP_EP4 ((unsigned int) 0x1 << 4) // (UDP) Reset Endpoint 4 -#define AT91C_UDP_EP5 ((unsigned int) 0x1 << 5) // (UDP) Reset Endpoint 5 -#define AT91C_UDP_EP6 ((unsigned int) 0x1 << 6) // (UDP) Reset Endpoint 6 -#define AT91C_UDP_EP7 ((unsigned int) 0x1 << 7) // (UDP) Reset Endpoint 7 -// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- -#define AT91C_UDP_TXCOMP ((unsigned int) 0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR -#define AT91C_UDP_RX_DATA_BK0 ((unsigned int) 0x1 << 1) // (UDP) Receive Data Bank 0 -#define AT91C_UDP_RXSETUP ((unsigned int) 0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) -#define AT91C_UDP_ISOERROR ((unsigned int) 0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) -#define AT91C_UDP_TXPKTRDY ((unsigned int) 0x1 << 4) // (UDP) Transmit Packet Ready -#define AT91C_UDP_FORCESTALL ((unsigned int) 0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). -#define AT91C_UDP_RX_DATA_BK1 ((unsigned int) 0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). -#define AT91C_UDP_DIR ((unsigned int) 0x1 << 7) // (UDP) Transfer Direction -#define AT91C_UDP_EPTYPE ((unsigned int) 0x7 << 8) // (UDP) Endpoint type -#define AT91C_UDP_EPTYPE_CTRL ((unsigned int) 0x0 << 8) // (UDP) Control -#define AT91C_UDP_EPTYPE_ISO_OUT ((unsigned int) 0x1 << 8) // (UDP) Isochronous OUT -#define AT91C_UDP_EPTYPE_BULK_OUT ((unsigned int) 0x2 << 8) // (UDP) Bulk OUT -#define AT91C_UDP_EPTYPE_INT_OUT ((unsigned int) 0x3 << 8) // (UDP) Interrupt OUT -#define AT91C_UDP_EPTYPE_ISO_IN ((unsigned int) 0x5 << 8) // (UDP) Isochronous IN -#define AT91C_UDP_EPTYPE_BULK_IN ((unsigned int) 0x6 << 8) // (UDP) Bulk IN -#define AT91C_UDP_EPTYPE_INT_IN ((unsigned int) 0x7 << 8) // (UDP) Interrupt IN -#define AT91C_UDP_DTGLE ((unsigned int) 0x1 << 11) // (UDP) Data Toggle -#define AT91C_UDP_EPEDS ((unsigned int) 0x1 << 15) // (UDP) Endpoint Enable Disable -#define AT91C_UDP_RXBYTECNT ((unsigned int) 0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface -// ***************************************************************************** -typedef struct _AT91S_TC { - AT91_REG TC_CCR; // Channel Control Register - AT91_REG TC_CMR; // Channel Mode Register - AT91_REG Reserved0[2]; // - AT91_REG TC_CV; // Counter Value - AT91_REG TC_RA; // Register A - AT91_REG TC_RB; // Register B - AT91_REG TC_RC; // Register C - AT91_REG TC_SR; // Status Register - AT91_REG TC_IER; // Interrupt Enable Register - AT91_REG TC_IDR; // Interrupt Disable Register - AT91_REG TC_IMR; // Interrupt Mask Register -} AT91S_TC, *AT91PS_TC; - -// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- -#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) // (TC) Counter Clock Enable Command -#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) // (TC) Counter Clock Disable Command -#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) // (TC) Software Trigger Command -// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- -#define AT91C_TC_CPCSTOP ((unsigned int) 0x1 << 6) // (TC) Counter Clock Stopped with RC Compare -#define AT91C_TC_CPCDIS ((unsigned int) 0x1 << 7) // (TC) Counter Clock Disable with RC Compare -#define AT91C_TC_EEVTEDG ((unsigned int) 0x3 << 8) // (TC) External Event Edge Selection -#define AT91C_TC_EEVTEDG_NONE ((unsigned int) 0x0 << 8) // (TC) Edge: None -#define AT91C_TC_EEVTEDG_RISING ((unsigned int) 0x1 << 8) // (TC) Edge: rising edge -#define AT91C_TC_EEVTEDG_FALLING ((unsigned int) 0x2 << 8) // (TC) Edge: falling edge -#define AT91C_TC_EEVTEDG_BOTH ((unsigned int) 0x3 << 8) // (TC) Edge: each edge -#define AT91C_TC_EEVT ((unsigned int) 0x3 << 10) // (TC) External Event Selection -#define AT91C_TC_EEVT_NONE ((unsigned int) 0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input -#define AT91C_TC_EEVT_RISING ((unsigned int) 0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output -#define AT91C_TC_EEVT_FALLING ((unsigned int) 0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output -#define AT91C_TC_EEVT_BOTH ((unsigned int) 0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output -#define AT91C_TC_ENETRG ((unsigned int) 0x1 << 12) // (TC) External Event Trigger enable -#define AT91C_TC_WAVESEL ((unsigned int) 0x3 << 13) // (TC) Waveform Selection -#define AT91C_TC_WAVESEL_UP ((unsigned int) 0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN ((unsigned int) 0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UP_AUTO ((unsigned int) 0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN_AUTO ((unsigned int) 0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare -#define AT91C_TC_CPCTRG ((unsigned int) 0x1 << 14) // (TC) RC Compare Trigger Enable -#define AT91C_TC_WAVE ((unsigned int) 0x1 << 15) // (TC) -#define AT91C_TC_ACPA ((unsigned int) 0x3 << 16) // (TC) RA Compare Effect on TIOA -#define AT91C_TC_ACPA_NONE ((unsigned int) 0x0 << 16) // (TC) Effect: none -#define AT91C_TC_ACPA_SET ((unsigned int) 0x1 << 16) // (TC) Effect: set -#define AT91C_TC_ACPA_CLEAR ((unsigned int) 0x2 << 16) // (TC) Effect: clear -#define AT91C_TC_ACPA_TOGGLE ((unsigned int) 0x3 << 16) // (TC) Effect: toggle -#define AT91C_TC_ACPC ((unsigned int) 0x3 << 18) // (TC) RC Compare Effect on TIOA -#define AT91C_TC_ACPC_NONE ((unsigned int) 0x0 << 18) // (TC) Effect: none -#define AT91C_TC_ACPC_SET ((unsigned int) 0x1 << 18) // (TC) Effect: set -#define AT91C_TC_ACPC_CLEAR ((unsigned int) 0x2 << 18) // (TC) Effect: clear -#define AT91C_TC_ACPC_TOGGLE ((unsigned int) 0x3 << 18) // (TC) Effect: toggle -#define AT91C_TC_AEEVT ((unsigned int) 0x3 << 20) // (TC) External Event Effect on TIOA -#define AT91C_TC_AEEVT_NONE ((unsigned int) 0x0 << 20) // (TC) Effect: none -#define AT91C_TC_AEEVT_SET ((unsigned int) 0x1 << 20) // (TC) Effect: set -#define AT91C_TC_AEEVT_CLEAR ((unsigned int) 0x2 << 20) // (TC) Effect: clear -#define AT91C_TC_AEEVT_TOGGLE ((unsigned int) 0x3 << 20) // (TC) Effect: toggle -#define AT91C_TC_ASWTRG ((unsigned int) 0x3 << 22) // (TC) Software Trigger Effect on TIOA -#define AT91C_TC_ASWTRG_NONE ((unsigned int) 0x0 << 22) // (TC) Effect: none -#define AT91C_TC_ASWTRG_SET ((unsigned int) 0x1 << 22) // (TC) Effect: set -#define AT91C_TC_ASWTRG_CLEAR ((unsigned int) 0x2 << 22) // (TC) Effect: clear -#define AT91C_TC_ASWTRG_TOGGLE ((unsigned int) 0x3 << 22) // (TC) Effect: toggle -#define AT91C_TC_BCPB ((unsigned int) 0x3 << 24) // (TC) RB Compare Effect on TIOB -#define AT91C_TC_BCPB_NONE ((unsigned int) 0x0 << 24) // (TC) Effect: none -#define AT91C_TC_BCPB_SET ((unsigned int) 0x1 << 24) // (TC) Effect: set -#define AT91C_TC_BCPB_CLEAR ((unsigned int) 0x2 << 24) // (TC) Effect: clear -#define AT91C_TC_BCPB_TOGGLE ((unsigned int) 0x3 << 24) // (TC) Effect: toggle -#define AT91C_TC_BCPC ((unsigned int) 0x3 << 26) // (TC) RC Compare Effect on TIOB -#define AT91C_TC_BCPC_NONE ((unsigned int) 0x0 << 26) // (TC) Effect: none -#define AT91C_TC_BCPC_SET ((unsigned int) 0x1 << 26) // (TC) Effect: set -#define AT91C_TC_BCPC_CLEAR ((unsigned int) 0x2 << 26) // (TC) Effect: clear -#define AT91C_TC_BCPC_TOGGLE ((unsigned int) 0x3 << 26) // (TC) Effect: toggle -#define AT91C_TC_BEEVT ((unsigned int) 0x3 << 28) // (TC) External Event Effect on TIOB -#define AT91C_TC_BEEVT_NONE ((unsigned int) 0x0 << 28) // (TC) Effect: none -#define AT91C_TC_BEEVT_SET ((unsigned int) 0x1 << 28) // (TC) Effect: set -#define AT91C_TC_BEEVT_CLEAR ((unsigned int) 0x2 << 28) // (TC) Effect: clear -#define AT91C_TC_BEEVT_TOGGLE ((unsigned int) 0x3 << 28) // (TC) Effect: toggle -#define AT91C_TC_BSWTRG ((unsigned int) 0x3 << 30) // (TC) Software Trigger Effect on TIOB -#define AT91C_TC_BSWTRG_NONE ((unsigned int) 0x0 << 30) // (TC) Effect: none -#define AT91C_TC_BSWTRG_SET ((unsigned int) 0x1 << 30) // (TC) Effect: set -#define AT91C_TC_BSWTRG_CLEAR ((unsigned int) 0x2 << 30) // (TC) Effect: clear -#define AT91C_TC_BSWTRG_TOGGLE ((unsigned int) 0x3 << 30) // (TC) Effect: toggle -// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- -#define AT91C_TC_COVFS ((unsigned int) 0x1 << 0) // (TC) Counter Overflow -#define AT91C_TC_LOVRS ((unsigned int) 0x1 << 1) // (TC) Load Overrun -#define AT91C_TC_CPAS ((unsigned int) 0x1 << 2) // (TC) RA Compare -#define AT91C_TC_CPBS ((unsigned int) 0x1 << 3) // (TC) RB Compare -#define AT91C_TC_CPCS ((unsigned int) 0x1 << 4) // (TC) RC Compare -#define AT91C_TC_LDRAS ((unsigned int) 0x1 << 5) // (TC) RA Loading -#define AT91C_TC_LDRBS ((unsigned int) 0x1 << 6) // (TC) RB Loading -#define AT91C_TC_ETRCS ((unsigned int) 0x1 << 7) // (TC) External Trigger -#define AT91C_TC_ETRGS ((unsigned int) 0x1 << 16) // (TC) Clock Enabling -#define AT91C_TC_MTIOA ((unsigned int) 0x1 << 17) // (TC) TIOA Mirror -#define AT91C_TC_MTIOB ((unsigned int) 0x1 << 18) // (TC) TIOA Mirror -// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- -// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- -// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Interface -// ***************************************************************************** -typedef struct _AT91S_TCB { - AT91S_TC TCB_TC0; // TC Channel 0 - AT91_REG Reserved0[4]; // - AT91S_TC TCB_TC1; // TC Channel 1 - AT91_REG Reserved1[4]; // - AT91S_TC TCB_TC2; // TC Channel 2 - AT91_REG Reserved2[4]; // - AT91_REG TCB_BCR; // TC Block Control Register - AT91_REG TCB_BMR; // TC Block Mode Register -} AT91S_TCB, *AT91PS_TCB; - -// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- -#define AT91C_TCB_SYNC ((unsigned int) 0x1 << 0) // (TCB) Synchro Command -// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- -#define AT91C_TCB_TC0XC0S ((unsigned int) 0x1 << 0) // (TCB) External Clock Signal 0 Selection -#define AT91C_TCB_TC0XC0S_TCLK0 ((unsigned int) 0x0) // (TCB) TCLK0 connected to XC0 -#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) // (TCB) None signal connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA1 ((unsigned int) 0x2) // (TCB) TIOA1 connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA2 ((unsigned int) 0x3) // (TCB) TIOA2 connected to XC0 -#define AT91C_TCB_TC1XC1S ((unsigned int) 0x1 << 2) // (TCB) External Clock Signal 1 Selection -#define AT91C_TCB_TC1XC1S_TCLK1 ((unsigned int) 0x0 << 2) // (TCB) TCLK1 connected to XC1 -#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) // (TCB) None signal connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA0 ((unsigned int) 0x2 << 2) // (TCB) TIOA0 connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA2 ((unsigned int) 0x3 << 2) // (TCB) TIOA2 connected to XC1 -#define AT91C_TCB_TC2XC2S ((unsigned int) 0x1 << 4) // (TCB) External Clock Signal 2 Selection -#define AT91C_TCB_TC2XC2S_TCLK2 ((unsigned int) 0x0 << 4) // (TCB) TCLK2 connected to XC2 -#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) // (TCB) None signal connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA0 ((unsigned int) 0x2 << 4) // (TCB) TIOA0 connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA2 ((unsigned int) 0x3 << 4) // (TCB) TIOA2 connected to XC2 - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Host Interface -// ***************************************************************************** -typedef struct _AT91S_UHP { - AT91_REG UHP_HcRevision; // Revision - AT91_REG UHP_HcControl; // Operating modes for the Host Controller - AT91_REG UHP_HcCommandStatus; // Command & status Register - AT91_REG UHP_HcInterruptStatus; // Interrupt Status Register - AT91_REG UHP_HcInterruptEnable; // Interrupt Enable Register - AT91_REG UHP_HcInterruptDisable; // Interrupt Disable Register - AT91_REG UHP_HcHCCA; // Pointer to the Host Controller Communication Area - AT91_REG UHP_HcPeriodCurrentED; // Current Isochronous or Interrupt Endpoint Descriptor - AT91_REG UHP_HcControlHeadED; // First Endpoint Descriptor of the Control list - AT91_REG UHP_HcControlCurrentED; // Endpoint Control and Status Register - AT91_REG UHP_HcBulkHeadED; // First endpoint register of the Bulk list - AT91_REG UHP_HcBulkCurrentED; // Current endpoint of the Bulk list - AT91_REG UHP_HcBulkDoneHead; // Last completed transfer descriptor - AT91_REG UHP_HcFmInterval; // Bit time between 2 consecutive SOFs - AT91_REG UHP_HcFmRemaining; // Bit time remaining in the current Frame - AT91_REG UHP_HcFmNumber; // Frame number - AT91_REG UHP_HcPeriodicStart; // Periodic Start - AT91_REG UHP_HcLSThreshold; // LS Threshold - AT91_REG UHP_HcRhDescriptorA; // Root Hub characteristics A - AT91_REG UHP_HcRhDescriptorB; // Root Hub characteristics B - AT91_REG UHP_HcRhStatus; // Root Hub Status register - AT91_REG UHP_HcRhPortStatus[2]; // Root Hub Port Status Register -} AT91S_UHP, *AT91PS_UHP; - - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Ethernet MAC -// ***************************************************************************** -typedef struct _AT91S_EMAC { - AT91_REG EMAC_CTL; // Network Control Register - AT91_REG EMAC_CFG; // Network Configuration Register - AT91_REG EMAC_SR; // Network Status Register - AT91_REG EMAC_TAR; // Transmit Address Register - AT91_REG EMAC_TCR; // Transmit Control Register - AT91_REG EMAC_TSR; // Transmit Status Register - AT91_REG EMAC_RBQP; // Receive Buffer Queue Pointer - AT91_REG Reserved0[1]; // - AT91_REG EMAC_RSR; // Receive Status Register - AT91_REG EMAC_ISR; // Interrupt Status Register - AT91_REG EMAC_IER; // Interrupt Enable Register - AT91_REG EMAC_IDR; // Interrupt Disable Register - AT91_REG EMAC_IMR; // Interrupt Mask Register - AT91_REG EMAC_MAN; // PHY Maintenance Register - AT91_REG Reserved1[2]; // - AT91_REG EMAC_FRA; // Frames Transmitted OK Register - AT91_REG EMAC_SCOL; // Single Collision Frame Register - AT91_REG EMAC_MCOL; // Multiple Collision Frame Register - AT91_REG EMAC_OK; // Frames Received OK Register - AT91_REG EMAC_SEQE; // Frame Check Sequence Error Register - AT91_REG EMAC_ALE; // Alignment Error Register - AT91_REG EMAC_DTE; // Deferred Transmission Frame Register - AT91_REG EMAC_LCOL; // Late Collision Register - AT91_REG EMAC_ECOL; // Excessive Collision Register - AT91_REG EMAC_CSE; // Carrier Sense Error Register - AT91_REG EMAC_TUE; // Transmit Underrun Error Register - AT91_REG EMAC_CDE; // Code Error Register - AT91_REG EMAC_ELR; // Excessive Length Error Register - AT91_REG EMAC_RJB; // Receive Jabber Register - AT91_REG EMAC_USF; // Undersize Frame Register - AT91_REG EMAC_SQEE; // SQE Test Error Register - AT91_REG EMAC_DRFC; // Discarded RX Frame Register - AT91_REG Reserved2[3]; // - AT91_REG EMAC_HSH; // Hash Address High[63:32] - AT91_REG EMAC_HSL; // Hash Address Low[31:0] - AT91_REG EMAC_SA1L; // Specific Address 1 Low, First 4 bytes - AT91_REG EMAC_SA1H; // Specific Address 1 High, Last 2 bytes - AT91_REG EMAC_SA2L; // Specific Address 2 Low, First 4 bytes - AT91_REG EMAC_SA2H; // Specific Address 2 High, Last 2 bytes - AT91_REG EMAC_SA3L; // Specific Address 3 Low, First 4 bytes - AT91_REG EMAC_SA3H; // Specific Address 3 High, Last 2 bytes - AT91_REG EMAC_SA4L; // Specific Address 4 Low, First 4 bytes - AT91_REG EMAC_SA4H; // Specific Address 4 High, Last 2 bytesr -} AT91S_EMAC, *AT91PS_EMAC; - -// -------- EMAC_CTL : (EMAC Offset: 0x0) -------- -#define AT91C_EMAC_LB ((unsigned int) 0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. -#define AT91C_EMAC_LBL ((unsigned int) 0x1 << 1) // (EMAC) Loopback local. -#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) // (EMAC) Receive enable. -#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) // (EMAC) Transmit enable. -#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) // (EMAC) Management port enable. -#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) // (EMAC) Clear statistics registers. -#define AT91C_EMAC_ISR ((unsigned int) 0x1 << 6) // (EMAC) Increment statistics registers. -#define AT91C_EMAC_WES ((unsigned int) 0x1 << 7) // (EMAC) Write enable for statistics registers. -#define AT91C_EMAC_BP ((unsigned int) 0x1 << 8) // (EMAC) Back pressure. -// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- -#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) // (EMAC) Speed. -#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) // (EMAC) Full duplex. -#define AT91C_EMAC_BR ((unsigned int) 0x1 << 2) // (EMAC) Bit rate. -#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) // (EMAC) Copy all frames. -#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) // (EMAC) No broadcast. -#define AT91C_EMAC_MTI ((unsigned int) 0x1 << 6) // (EMAC) Multicast hash enable -#define AT91C_EMAC_UNI ((unsigned int) 0x1 << 7) // (EMAC) Unicast hash enable. -#define AT91C_EMAC_BIG ((unsigned int) 0x1 << 8) // (EMAC) Receive 1522 bytes. -#define AT91C_EMAC_EAE ((unsigned int) 0x1 << 9) // (EMAC) External address match enable. -#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) // (EMAC) -#define AT91C_EMAC_CLK_HCLK_8 ((unsigned int) 0x0 << 10) // (EMAC) HCLK divided by 8 -#define AT91C_EMAC_CLK_HCLK_16 ((unsigned int) 0x1 << 10) // (EMAC) HCLK divided by 16 -#define AT91C_EMAC_CLK_HCLK_32 ((unsigned int) 0x2 << 10) // (EMAC) HCLK divided by 32 -#define AT91C_EMAC_CLK_HCLK_64 ((unsigned int) 0x3 << 10) // (EMAC) HCLK divided by 64 -#define AT91C_EMAC_RTY ((unsigned int) 0x1 << 12) // (EMAC) -#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) // (EMAC) -// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- -#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) // (EMAC) -#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) // (EMAC) -// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- -#define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) // (EMAC) -#define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) // (EMAC) -// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- -#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) // (EMAC) -#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) // (EMAC) -#define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) // (EMAC) -#define AT91C_EMAC_TXIDLE ((unsigned int) 0x1 << 3) // (EMAC) -#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) // (EMAC) -#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) // (EMAC) -#define AT91C_EMAC_UND ((unsigned int) 0x1 << 6) // (EMAC) -// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- -#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) // (EMAC) -#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) // (EMAC) -// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- -#define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) // (EMAC) -#define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) // (EMAC) -#define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) // (EMAC) -#define AT91C_EMAC_TOVR ((unsigned int) 0x1 << 3) // (EMAC) -#define AT91C_EMAC_TUND ((unsigned int) 0x1 << 4) // (EMAC) -#define AT91C_EMAC_RTRY ((unsigned int) 0x1 << 5) // (EMAC) -#define AT91C_EMAC_TBRE ((unsigned int) 0x1 << 6) // (EMAC) -#define AT91C_EMAC_TCOM ((unsigned int) 0x1 << 7) // (EMAC) -#define AT91C_EMAC_TIDLE ((unsigned int) 0x1 << 8) // (EMAC) -#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 9) // (EMAC) -#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) // (EMAC) -#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) // (EMAC) -// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- -// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- -// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- -// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- -#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) // (EMAC) -#define AT91C_EMAC_CODE ((unsigned int) 0x3 << 16) // (EMAC) -#define AT91C_EMAC_REGA ((unsigned int) 0x1F << 18) // (EMAC) -#define AT91C_EMAC_PHYA ((unsigned int) 0x1F << 23) // (EMAC) -#define AT91C_EMAC_RW ((unsigned int) 0x3 << 28) // (EMAC) -#define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) // (EMAC) -#define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) // (EMAC) - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR External Bus Interface -// ***************************************************************************** -typedef struct _AT91S_EBI { - AT91_REG EBI_CSA; // Chip Select Assignment Register - AT91_REG EBI_CFGR; // Configuration Register -} AT91S_EBI, *AT91PS_EBI; - -// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- -#define AT91C_EBI_CS0A ((unsigned int) 0x1 << 0) // (EBI) Chip Select 0 Assignment -#define AT91C_EBI_CS0A_SMC ((unsigned int) 0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS0A_BFC ((unsigned int) 0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller. -#define AT91C_EBI_CS1A ((unsigned int) 0x1 << 1) // (EBI) Chip Select 1 Assignment -#define AT91C_EBI_CS1A_SMC ((unsigned int) 0x0 << 1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS1A_SDRAMC ((unsigned int) 0x1 << 1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller. -#define AT91C_EBI_CS3A ((unsigned int) 0x1 << 3) // (EBI) Chip Select 3 Assignment -#define AT91C_EBI_CS3A_SMC ((unsigned int) 0x0 << 3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. -#define AT91C_EBI_CS3A_SMC_SmartMedia ((unsigned int) 0x1 << 3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. -#define AT91C_EBI_CS4A ((unsigned int) 0x1 << 4) // (EBI) Chip Select 4 Assignment -#define AT91C_EBI_CS4A_SMC ((unsigned int) 0x0 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. -#define AT91C_EBI_CS4A_SMC_CompactFlash ((unsigned int) 0x1 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. -// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- -#define AT91C_EBI_DBPUC ((unsigned int) 0x1 << 0) // (EBI) Data Bus Pull-Up Configuration -#define AT91C_EBI_EBSEN ((unsigned int) 0x1 << 1) // (EBI) Bus Sharing Enable - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface -// ***************************************************************************** -typedef struct _AT91S_SMC2 { - AT91_REG SMC2_CSR[8]; // SMC2 Chip Select Register -} AT91S_SMC2, *AT91PS_SMC2; - -// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- -#define AT91C_SMC2_NWS ((unsigned int) 0x7F << 0) // (SMC2) Number of Wait States -#define AT91C_SMC2_WSEN ((unsigned int) 0x1 << 7) // (SMC2) Wait State Enable -#define AT91C_SMC2_TDF ((unsigned int) 0xF << 8) // (SMC2) Data Float Time -#define AT91C_SMC2_BAT ((unsigned int) 0x1 << 12) // (SMC2) Byte Access Type -#define AT91C_SMC2_DBW ((unsigned int) 0x1 << 13) // (SMC2) Data Bus Width -#define AT91C_SMC2_DBW_16 ((unsigned int) 0x1 << 13) // (SMC2) 16-bit. -#define AT91C_SMC2_DBW_8 ((unsigned int) 0x2 << 13) // (SMC2) 8-bit. -#define AT91C_SMC2_DRP ((unsigned int) 0x1 << 15) // (SMC2) Data Read Protocol -#define AT91C_SMC2_ACSS ((unsigned int) 0x3 << 16) // (SMC2) Address to Chip Select Setup -#define AT91C_SMC2_ACSS_STANDARD ((unsigned int) 0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. -#define AT91C_SMC2_ACSS_1_CYCLE ((unsigned int) 0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_2_CYCLES ((unsigned int) 0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_3_CYCLES ((unsigned int) 0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access. -#define AT91C_SMC2_RWSETUP ((unsigned int) 0x7 << 24) // (SMC2) Read and Write Signal Setup Time -#define AT91C_SMC2_RWHOLD ((unsigned int) 0x7 << 29) // (SMC2) Read and Write Signal Hold Time - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR SDRAM Controller Interface -// ***************************************************************************** -typedef struct _AT91S_SDRC { - AT91_REG SDRC_MR; // SDRAM Controller Mode Register - AT91_REG SDRC_TR; // SDRAM Controller Refresh Timer Register - AT91_REG SDRC_CR; // SDRAM Controller Configuration Register - AT91_REG SDRC_SRR; // SDRAM Controller Self Refresh Register - AT91_REG SDRC_LPR; // SDRAM Controller Low Power Register - AT91_REG SDRC_IER; // SDRAM Controller Interrupt Enable Register - AT91_REG SDRC_IDR; // SDRAM Controller Interrupt Disable Register - AT91_REG SDRC_IMR; // SDRAM Controller Interrupt Mask Register - AT91_REG SDRC_ISR; // SDRAM Controller Interrupt Mask Register -} AT91S_SDRC, *AT91PS_SDRC; - -// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- -#define AT91C_SDRC_MODE ((unsigned int) 0xF << 0) // (SDRC) Mode -#define AT91C_SDRC_MODE_NORMAL_CMD ((unsigned int) 0x0) // (SDRC) Normal Mode -#define AT91C_SDRC_MODE_NOP_CMD ((unsigned int) 0x1) // (SDRC) NOP Command -#define AT91C_SDRC_MODE_PRCGALL_CMD ((unsigned int) 0x2) // (SDRC) All Banks Precharge Command -#define AT91C_SDRC_MODE_LMR_CMD ((unsigned int) 0x3) // (SDRC) Load Mode Register Command -#define AT91C_SDRC_MODE_RFSH_CMD ((unsigned int) 0x4) // (SDRC) Refresh Command -#define AT91C_SDRC_DBW ((unsigned int) 0x1 << 4) // (SDRC) Data Bus Width -#define AT91C_SDRC_DBW_32_BITS ((unsigned int) 0x0 << 4) // (SDRC) 32 Bits datas bus -#define AT91C_SDRC_DBW_16_BITS ((unsigned int) 0x1 << 4) // (SDRC) 16 Bits datas bus -// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- -#define AT91C_SDRC_COUNT ((unsigned int) 0xFFF << 0) // (SDRC) Refresh Counter -// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- -#define AT91C_SDRC_NC ((unsigned int) 0x3 << 0) // (SDRC) Number of Column Bits -#define AT91C_SDRC_NC_8 ((unsigned int) 0x0) // (SDRC) 8 Bits -#define AT91C_SDRC_NC_9 ((unsigned int) 0x1) // (SDRC) 9 Bits -#define AT91C_SDRC_NC_10 ((unsigned int) 0x2) // (SDRC) 10 Bits -#define AT91C_SDRC_NC_11 ((unsigned int) 0x3) // (SDRC) 11 Bits -#define AT91C_SDRC_NR ((unsigned int) 0x3 << 2) // (SDRC) Number of Row Bits -#define AT91C_SDRC_NR_11 ((unsigned int) 0x0 << 2) // (SDRC) 11 Bits -#define AT91C_SDRC_NR_12 ((unsigned int) 0x1 << 2) // (SDRC) 12 Bits -#define AT91C_SDRC_NR_13 ((unsigned int) 0x2 << 2) // (SDRC) 13 Bits -#define AT91C_SDRC_NB ((unsigned int) 0x1 << 4) // (SDRC) Number of Banks -#define AT91C_SDRC_NB_2_BANKS ((unsigned int) 0x0 << 4) // (SDRC) 2 banks -#define AT91C_SDRC_NB_4_BANKS ((unsigned int) 0x1 << 4) // (SDRC) 4 banks -#define AT91C_SDRC_CAS ((unsigned int) 0x3 << 5) // (SDRC) CAS Latency -#define AT91C_SDRC_CAS_2 ((unsigned int) 0x2 << 5) // (SDRC) 2 cycles -#define AT91C_SDRC_TWR ((unsigned int) 0xF << 7) // (SDRC) Number of Write Recovery Time Cycles -#define AT91C_SDRC_TRC ((unsigned int) 0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles -#define AT91C_SDRC_TRP ((unsigned int) 0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles -#define AT91C_SDRC_TRCD ((unsigned int) 0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles -#define AT91C_SDRC_TRAS ((unsigned int) 0xF << 23) // (SDRC) Number of RAS Active Time Cycles -#define AT91C_SDRC_TXSR ((unsigned int) 0xF << 27) // (SDRC) Number of Command Recovery Time Cycles -// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- -#define AT91C_SDRC_SRCB ((unsigned int) 0x1 << 0) // (SDRC) Self-refresh Command Bit -// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- -#define AT91C_SDRC_LPCB ((unsigned int) 0x1 << 0) // (SDRC) Low-power Command Bit -// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- -#define AT91C_SDRC_RES ((unsigned int) 0x1 << 0) // (SDRC) Refresh Error Status -// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- -// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- -// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Burst Flash Controller Interface -// ***************************************************************************** -typedef struct _AT91S_BFC { - AT91_REG BFC_MR; // BFC Mode Register -} AT91S_BFC, *AT91PS_BFC; - -// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- -#define AT91C_BFC_BFCOM ((unsigned int) 0x3 << 0) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCOM_DISABLED ((unsigned int) 0x0) // (BFC) NPCS0 is driven by the SMC or remains high. -#define AT91C_BFC_BFCOM_ASYNC ((unsigned int) 0x1) // (BFC) Asynchronous -#define AT91C_BFC_BFCOM_BURST_READ ((unsigned int) 0x2) // (BFC) Burst Read -#define AT91C_BFC_BFCC ((unsigned int) 0x3 << 2) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCC_MCK ((unsigned int) 0x1 << 2) // (BFC) Master Clock. -#define AT91C_BFC_BFCC_MCK_DIV_2 ((unsigned int) 0x2 << 2) // (BFC) Master Clock divided by 2. -#define AT91C_BFC_BFCC_MCK_DIV_4 ((unsigned int) 0x3 << 2) // (BFC) Master Clock divided by 4. -#define AT91C_BFC_AVL ((unsigned int) 0xF << 4) // (BFC) Address Valid Latency -#define AT91C_BFC_PAGES ((unsigned int) 0x7 << 8) // (BFC) Page Size -#define AT91C_BFC_PAGES_NO_PAGE ((unsigned int) 0x0 << 8) // (BFC) No page handling. -#define AT91C_BFC_PAGES_16 ((unsigned int) 0x1 << 8) // (BFC) 16 bytes page size. -#define AT91C_BFC_PAGES_32 ((unsigned int) 0x2 << 8) // (BFC) 32 bytes page size. -#define AT91C_BFC_PAGES_64 ((unsigned int) 0x3 << 8) // (BFC) 64 bytes page size. -#define AT91C_BFC_PAGES_128 ((unsigned int) 0x4 << 8) // (BFC) 128 bytes page size. -#define AT91C_BFC_PAGES_256 ((unsigned int) 0x5 << 8) // (BFC) 256 bytes page size. -#define AT91C_BFC_PAGES_512 ((unsigned int) 0x6 << 8) // (BFC) 512 bytes page size. -#define AT91C_BFC_PAGES_1024 ((unsigned int) 0x7 << 8) // (BFC) 1024 bytes page size. -#define AT91C_BFC_OEL ((unsigned int) 0x3 << 12) // (BFC) Output Enable Latency -#define AT91C_BFC_BAAEN ((unsigned int) 0x1 << 16) // (BFC) Burst Address Advance Enable -#define AT91C_BFC_BFOEH ((unsigned int) 0x1 << 17) // (BFC) Burst Flash Output Enable Handling -#define AT91C_BFC_MUXEN ((unsigned int) 0x1 << 18) // (BFC) Multiplexed Bus Enable -#define AT91C_BFC_RDYEN ((unsigned int) 0x1 << 19) // (BFC) Ready Enable Mode - -// ***************************************************************************** -// REGISTER ADDRESS DEFINITION FOR AT91RM9200 -// ***************************************************************************** -// ========== Register definition for SYS peripheral ========== -// ========== Register definition for MC peripheral ========== -#define AT91C_MC_PUER ((AT91_REG *) 0xFFFFFF54) // (MC) MC Protection Unit Enable Register -#define AT91C_MC_ASR ((AT91_REG *) 0xFFFFFF04) // (MC) MC Abort Status Register -#define AT91C_MC_PUP ((AT91_REG *) 0xFFFFFF50) // (MC) MC Protection Unit Peripherals -#define AT91C_MC_PUIA ((AT91_REG *) 0xFFFFFF10) // (MC) MC Protection Unit Area -#define AT91C_MC_AASR ((AT91_REG *) 0xFFFFFF08) // (MC) MC Abort Address Status Register -#define AT91C_MC_RCR ((AT91_REG *) 0xFFFFFF00) // (MC) MC Remap Control Register -// ========== Register definition for RTC peripheral ========== -#define AT91C_RTC_IMR ((AT91_REG *) 0xFFFFFE28) // (RTC) Interrupt Mask Register -#define AT91C_RTC_IER ((AT91_REG *) 0xFFFFFE20) // (RTC) Interrupt Enable Register -#define AT91C_RTC_SR ((AT91_REG *) 0xFFFFFE18) // (RTC) Status Register -#define AT91C_RTC_TIMALR ((AT91_REG *) 0xFFFFFE10) // (RTC) Time Alarm Register -#define AT91C_RTC_TIMR ((AT91_REG *) 0xFFFFFE08) // (RTC) Time Register -#define AT91C_RTC_CR ((AT91_REG *) 0xFFFFFE00) // (RTC) Control Register -#define AT91C_RTC_VER ((AT91_REG *) 0xFFFFFE2C) // (RTC) Valid Entry Register -#define AT91C_RTC_IDR ((AT91_REG *) 0xFFFFFE24) // (RTC) Interrupt Disable Register -#define AT91C_RTC_SCCR ((AT91_REG *) 0xFFFFFE1C) // (RTC) Status Clear Command Register -#define AT91C_RTC_CALALR ((AT91_REG *) 0xFFFFFE14) // (RTC) Calendar Alarm Register -#define AT91C_RTC_CALR ((AT91_REG *) 0xFFFFFE0C) // (RTC) Calendar Register -#define AT91C_RTC_MR ((AT91_REG *) 0xFFFFFE04) // (RTC) Mode Register -// ========== Register definition for ST peripheral ========== -#define AT91C_ST_CRTR ((AT91_REG *) 0xFFFFFD24) // (ST) Current Real-time Register -#define AT91C_ST_IMR ((AT91_REG *) 0xFFFFFD1C) // (ST) Interrupt Mask Register -#define AT91C_ST_IER ((AT91_REG *) 0xFFFFFD14) // (ST) Interrupt Enable Register -#define AT91C_ST_RTMR ((AT91_REG *) 0xFFFFFD0C) // (ST) Real-time Mode Register -#define AT91C_ST_PIMR ((AT91_REG *) 0xFFFFFD04) // (ST) Period Interval Mode Register -#define AT91C_ST_RTAR ((AT91_REG *) 0xFFFFFD20) // (ST) Real-time Alarm Register -#define AT91C_ST_IDR ((AT91_REG *) 0xFFFFFD18) // (ST) Interrupt Disable Register -#define AT91C_ST_SR ((AT91_REG *) 0xFFFFFD10) // (ST) Status Register -#define AT91C_ST_WDMR ((AT91_REG *) 0xFFFFFD08) // (ST) Watchdog Mode Register -#define AT91C_ST_CR ((AT91_REG *) 0xFFFFFD00) // (ST) Control Register -// ========== Register definition for PMC peripheral ========== -#define AT91C_PMC_SCSR ((AT91_REG *) 0xFFFFFC08) // (PMC) System Clock Status Register -#define AT91C_PMC_SCER ((AT91_REG *) 0xFFFFFC00) // (PMC) System Clock Enable Register -#define AT91C_PMC_IMR ((AT91_REG *) 0xFFFFFC6C) // (PMC) Interrupt Mask Register -#define AT91C_PMC_IDR ((AT91_REG *) 0xFFFFFC64) // (PMC) Interrupt Disable Register -#define AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) // (PMC) Peripheral Clock Disable Register -#define AT91C_PMC_SCDR ((AT91_REG *) 0xFFFFFC04) // (PMC) System Clock Disable Register -#define AT91C_PMC_SR ((AT91_REG *) 0xFFFFFC68) // (PMC) Status Register -#define AT91C_PMC_IER ((AT91_REG *) 0xFFFFFC60) // (PMC) Interrupt Enable Register -#define AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register -#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) // (PMC) Peripheral Clock Enable Register -#define AT91C_PMC_PCSR ((AT91_REG *) 0xFFFFFC18) // (PMC) Peripheral Clock Status Register -#define AT91C_PMC_PCKR ((AT91_REG *) 0xFFFFFC40) // (PMC) Programmable Clock Register -// ========== Register definition for CKGR peripheral ========== -#define AT91C_CKGR_PLLBR ((AT91_REG *) 0xFFFFFC2C) // (CKGR) PLL B Register -#define AT91C_CKGR_MCFR ((AT91_REG *) 0xFFFFFC24) // (CKGR) Main Clock Frequency Register -#define AT91C_CKGR_PLLAR ((AT91_REG *) 0xFFFFFC28) // (CKGR) PLL A Register -#define AT91C_CKGR_MOR ((AT91_REG *) 0xFFFFFC20) // (CKGR) Main Oscillator Register -// ========== Register definition for PIOD peripheral ========== -#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) // (PIOD) Pin Data Status Register -#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) // (PIOD) Clear Output Data Register -#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) // (PIOD) Output Write Enable Register -#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) // (PIOD) Multi-driver Enable Register -#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) // (PIOD) Interrupt Mask Register -#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) // (PIOD) Interrupt Enable Register -#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) // (PIOD) Output Data Status Register -#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) // (PIOD) Set Output Data Register -#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) // (PIOD) PIO Enable Register -#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) // (PIOD) Output Write Disable Register -#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) // (PIOD) Pull-up Enable Register -#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) // (PIOD) Multi-driver Disable Register -#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) // (PIOD) Interrupt Status Register -#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) // (PIOD) Interrupt Disable Register -#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) // (PIOD) PIO Disable Register -#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) // (PIOD) Output Disable Registerr -#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) // (PIOD) Output Write Status Register -#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) // (PIOD) AB Select Status Register -#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) // (PIOD) Select A Register -#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) // (PIOD) Pad Pull-up Status Register -#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) // (PIOD) Pull-up Disable Register -#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) // (PIOD) Multi-driver Status Register -#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) // (PIOD) PIO Status Register -#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) // (PIOD) Output Enable Register -#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) // (PIOD) Output Status Register -#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) // (PIOD) Input Filter Enable Register -#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) // (PIOD) Select B Register -#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) // (PIOD) Input Filter Disable Register -#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) // (PIOD) Input Filter Status Register -// ========== Register definition for PIOC peripheral ========== -#define AT91C_PIOC_IFDR ((AT91_REG *) 0xFFFFF824) // (PIOC) Input Filter Disable Register -#define AT91C_PIOC_ODR ((AT91_REG *) 0xFFFFF814) // (PIOC) Output Disable Registerr -#define AT91C_PIOC_ABSR ((AT91_REG *) 0xFFFFF878) // (PIOC) AB Select Status Register -#define AT91C_PIOC_SODR ((AT91_REG *) 0xFFFFF830) // (PIOC) Set Output Data Register -#define AT91C_PIOC_IFSR ((AT91_REG *) 0xFFFFF828) // (PIOC) Input Filter Status Register -#define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) // (PIOC) Clear Output Data Register -#define AT91C_PIOC_ODSR ((AT91_REG *) 0xFFFFF838) // (PIOC) Output Data Status Register -#define AT91C_PIOC_IER ((AT91_REG *) 0xFFFFF840) // (PIOC) Interrupt Enable Register -#define AT91C_PIOC_IMR ((AT91_REG *) 0xFFFFF848) // (PIOC) Interrupt Mask Register -#define AT91C_PIOC_OWDR ((AT91_REG *) 0xFFFFF8A4) // (PIOC) Output Write Disable Register -#define AT91C_PIOC_MDDR ((AT91_REG *) 0xFFFFF854) // (PIOC) Multi-driver Disable Register -#define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) // (PIOC) Pin Data Status Register -#define AT91C_PIOC_IDR ((AT91_REG *) 0xFFFFF844) // (PIOC) Interrupt Disable Register -#define AT91C_PIOC_ISR ((AT91_REG *) 0xFFFFF84C) // (PIOC) Interrupt Status Register -#define AT91C_PIOC_PDR ((AT91_REG *) 0xFFFFF804) // (PIOC) PIO Disable Register -#define AT91C_PIOC_OWSR ((AT91_REG *) 0xFFFFF8A8) // (PIOC) Output Write Status Register -#define AT91C_PIOC_OWER ((AT91_REG *) 0xFFFFF8A0) // (PIOC) Output Write Enable Register -#define AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) // (PIOC) Select A Register -#define AT91C_PIOC_PPUSR ((AT91_REG *) 0xFFFFF868) // (PIOC) Pad Pull-up Status Register -#define AT91C_PIOC_PPUDR ((AT91_REG *) 0xFFFFF860) // (PIOC) Pull-up Disable Register -#define AT91C_PIOC_MDSR ((AT91_REG *) 0xFFFFF858) // (PIOC) Multi-driver Status Register -#define AT91C_PIOC_MDER ((AT91_REG *) 0xFFFFF850) // (PIOC) Multi-driver Enable Register -#define AT91C_PIOC_IFER ((AT91_REG *) 0xFFFFF820) // (PIOC) Input Filter Enable Register -#define AT91C_PIOC_OSR ((AT91_REG *) 0xFFFFF818) // (PIOC) Output Status Register -#define AT91C_PIOC_OER ((AT91_REG *) 0xFFFFF810) // (PIOC) Output Enable Register -#define AT91C_PIOC_PSR ((AT91_REG *) 0xFFFFF808) // (PIOC) PIO Status Register -#define AT91C_PIOC_PER ((AT91_REG *) 0xFFFFF800) // (PIOC) PIO Enable Register -#define AT91C_PIOC_BSR ((AT91_REG *) 0xFFFFF874) // (PIOC) Select B Register -#define AT91C_PIOC_PPUER ((AT91_REG *) 0xFFFFF864) // (PIOC) Pull-up Enable Register -// ========== Register definition for PIOB peripheral ========== -#define AT91C_PIOB_OWSR ((AT91_REG *) 0xFFFFF6A8) // (PIOB) Output Write Status Register -#define AT91C_PIOB_PPUSR ((AT91_REG *) 0xFFFFF668) // (PIOB) Pad Pull-up Status Register -#define AT91C_PIOB_PPUDR ((AT91_REG *) 0xFFFFF660) // (PIOB) Pull-up Disable Register -#define AT91C_PIOB_MDSR ((AT91_REG *) 0xFFFFF658) // (PIOB) Multi-driver Status Register -#define AT91C_PIOB_MDER ((AT91_REG *) 0xFFFFF650) // (PIOB) Multi-driver Enable Register -#define AT91C_PIOB_IMR ((AT91_REG *) 0xFFFFF648) // (PIOB) Interrupt Mask Register -#define AT91C_PIOB_OSR ((AT91_REG *) 0xFFFFF618) // (PIOB) Output Status Register -#define AT91C_PIOB_OER ((AT91_REG *) 0xFFFFF610) // (PIOB) Output Enable Register -#define AT91C_PIOB_PSR ((AT91_REG *) 0xFFFFF608) // (PIOB) PIO Status Register -#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) // (PIOB) PIO Enable Register -#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) // (PIOB) Select B Register -#define AT91C_PIOB_PPUER ((AT91_REG *) 0xFFFFF664) // (PIOB) Pull-up Enable Register -#define AT91C_PIOB_IFDR ((AT91_REG *) 0xFFFFF624) // (PIOB) Input Filter Disable Register -#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) // (PIOB) Output Disable Registerr -#define AT91C_PIOB_ABSR ((AT91_REG *) 0xFFFFF678) // (PIOB) AB Select Status Register -#define AT91C_PIOB_ASR ((AT91_REG *) 0xFFFFF670) // (PIOB) Select A Register -#define AT91C_PIOB_IFER ((AT91_REG *) 0xFFFFF620) // (PIOB) Input Filter Enable Register -#define AT91C_PIOB_IFSR ((AT91_REG *) 0xFFFFF628) // (PIOB) Input Filter Status Register -#define AT91C_PIOB_SODR ((AT91_REG *) 0xFFFFF630) // (PIOB) Set Output Data Register -#define AT91C_PIOB_ODSR ((AT91_REG *) 0xFFFFF638) // (PIOB) Output Data Status Register -#define AT91C_PIOB_CODR ((AT91_REG *) 0xFFFFF634) // (PIOB) Clear Output Data Register -#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) // (PIOB) Pin Data Status Register -#define AT91C_PIOB_OWER ((AT91_REG *) 0xFFFFF6A0) // (PIOB) Output Write Enable Register -#define AT91C_PIOB_IER ((AT91_REG *) 0xFFFFF640) // (PIOB) Interrupt Enable Register -#define AT91C_PIOB_OWDR ((AT91_REG *) 0xFFFFF6A4) // (PIOB) Output Write Disable Register -#define AT91C_PIOB_MDDR ((AT91_REG *) 0xFFFFF654) // (PIOB) Multi-driver Disable Register -#define AT91C_PIOB_ISR ((AT91_REG *) 0xFFFFF64C) // (PIOB) Interrupt Status Register -#define AT91C_PIOB_IDR ((AT91_REG *) 0xFFFFF644) // (PIOB) Interrupt Disable Register -#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) // (PIOB) PIO Disable Register -// ========== Register definition for PIOA peripheral ========== -#define AT91C_PIOA_IMR ((AT91_REG *) 0xFFFFF448) // (PIOA) Interrupt Mask Register -#define AT91C_PIOA_IER ((AT91_REG *) 0xFFFFF440) // (PIOA) Interrupt Enable Register -#define AT91C_PIOA_OWDR ((AT91_REG *) 0xFFFFF4A4) // (PIOA) Output Write Disable Register -#define AT91C_PIOA_ISR ((AT91_REG *) 0xFFFFF44C) // (PIOA) Interrupt Status Register -#define AT91C_PIOA_PPUDR ((AT91_REG *) 0xFFFFF460) // (PIOA) Pull-up Disable Register -#define AT91C_PIOA_MDSR ((AT91_REG *) 0xFFFFF458) // (PIOA) Multi-driver Status Register -#define AT91C_PIOA_MDER ((AT91_REG *) 0xFFFFF450) // (PIOA) Multi-driver Enable Register -#define AT91C_PIOA_PER ((AT91_REG *) 0xFFFFF400) // (PIOA) PIO Enable Register -#define AT91C_PIOA_PSR ((AT91_REG *) 0xFFFFF408) // (PIOA) PIO Status Register -#define AT91C_PIOA_OER ((AT91_REG *) 0xFFFFF410) // (PIOA) Output Enable Register -#define AT91C_PIOA_BSR ((AT91_REG *) 0xFFFFF474) // (PIOA) Select B Register -#define AT91C_PIOA_PPUER ((AT91_REG *) 0xFFFFF464) // (PIOA) Pull-up Enable Register -#define AT91C_PIOA_MDDR ((AT91_REG *) 0xFFFFF454) // (PIOA) Multi-driver Disable Register -#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) // (PIOA) PIO Disable Register -#define AT91C_PIOA_ODR ((AT91_REG *) 0xFFFFF414) // (PIOA) Output Disable Registerr -#define AT91C_PIOA_IFDR ((AT91_REG *) 0xFFFFF424) // (PIOA) Input Filter Disable Register -#define AT91C_PIOA_ABSR ((AT91_REG *) 0xFFFFF478) // (PIOA) AB Select Status Register -#define AT91C_PIOA_ASR ((AT91_REG *) 0xFFFFF470) // (PIOA) Select A Register -#define AT91C_PIOA_PPUSR ((AT91_REG *) 0xFFFFF468) // (PIOA) Pad Pull-up Status Register -#define AT91C_PIOA_ODSR ((AT91_REG *) 0xFFFFF438) // (PIOA) Output Data Status Register -#define AT91C_PIOA_SODR ((AT91_REG *) 0xFFFFF430) // (PIOA) Set Output Data Register -#define AT91C_PIOA_IFSR ((AT91_REG *) 0xFFFFF428) // (PIOA) Input Filter Status Register -#define AT91C_PIOA_IFER ((AT91_REG *) 0xFFFFF420) // (PIOA) Input Filter Enable Register -#define AT91C_PIOA_OSR ((AT91_REG *) 0xFFFFF418) // (PIOA) Output Status Register -#define AT91C_PIOA_IDR ((AT91_REG *) 0xFFFFF444) // (PIOA) Interrupt Disable Register -#define AT91C_PIOA_PDSR ((AT91_REG *) 0xFFFFF43C) // (PIOA) Pin Data Status Register -#define AT91C_PIOA_CODR ((AT91_REG *) 0xFFFFF434) // (PIOA) Clear Output Data Register -#define AT91C_PIOA_OWSR ((AT91_REG *) 0xFFFFF4A8) // (PIOA) Output Write Status Register -#define AT91C_PIOA_OWER ((AT91_REG *) 0xFFFFF4A0) // (PIOA) Output Write Enable Register -// ========== Register definition for DBGU peripheral ========== -#define AT91C_DBGU_C2R ((AT91_REG *) 0xFFFFF244) // (DBGU) Chip ID2 Register -#define AT91C_DBGU_THR ((AT91_REG *) 0xFFFFF21C) // (DBGU) Transmitter Holding Register -#define AT91C_DBGU_CSR ((AT91_REG *) 0xFFFFF214) // (DBGU) Channel Status Register -#define AT91C_DBGU_IDR ((AT91_REG *) 0xFFFFF20C) // (DBGU) Interrupt Disable Register -#define AT91C_DBGU_MR ((AT91_REG *) 0xFFFFF204) // (DBGU) Mode Register -#define AT91C_DBGU_FNTR ((AT91_REG *) 0xFFFFF248) // (DBGU) Force NTRST Register -#define AT91C_DBGU_C1R ((AT91_REG *) 0xFFFFF240) // (DBGU) Chip ID1 Register -#define AT91C_DBGU_BRGR ((AT91_REG *) 0xFFFFF220) // (DBGU) Baud Rate Generator Register -#define AT91C_DBGU_RHR ((AT91_REG *) 0xFFFFF218) // (DBGU) Receiver Holding Register -#define AT91C_DBGU_IMR ((AT91_REG *) 0xFFFFF210) // (DBGU) Interrupt Mask Register -#define AT91C_DBGU_IER ((AT91_REG *) 0xFFFFF208) // (DBGU) Interrupt Enable Register -#define AT91C_DBGU_CR ((AT91_REG *) 0xFFFFF200) // (DBGU) Control Register -// ========== Register definition for PDC_DBGU peripheral ========== -#define AT91C_DBGU_TNCR ((AT91_REG *) 0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register -#define AT91C_DBGU_RNCR ((AT91_REG *) 0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register -#define AT91C_DBGU_PTCR ((AT91_REG *) 0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register -#define AT91C_DBGU_PTSR ((AT91_REG *) 0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register -#define AT91C_DBGU_RCR ((AT91_REG *) 0xFFFFF304) // (PDC_DBGU) Receive Counter Register -#define AT91C_DBGU_TCR ((AT91_REG *) 0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register -#define AT91C_DBGU_RPR ((AT91_REG *) 0xFFFFF300) // (PDC_DBGU) Receive Pointer Register -#define AT91C_DBGU_TPR ((AT91_REG *) 0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register -#define AT91C_DBGU_RNPR ((AT91_REG *) 0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register -#define AT91C_DBGU_TNPR ((AT91_REG *) 0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register -// ========== Register definition for AIC peripheral ========== -#define AT91C_AIC_ICCR ((AT91_REG *) 0xFFFFF128) // (AIC) Interrupt Clear Command Register -#define AT91C_AIC_IECR ((AT91_REG *) 0xFFFFF120) // (AIC) Interrupt Enable Command Register -#define AT91C_AIC_SMR ((AT91_REG *) 0xFFFFF000) // (AIC) Source Mode Register -#define AT91C_AIC_ISCR ((AT91_REG *) 0xFFFFF12C) // (AIC) Interrupt Set Command Register -#define AT91C_AIC_EOICR ((AT91_REG *) 0xFFFFF130) // (AIC) End of Interrupt Command Register -#define AT91C_AIC_DCR ((AT91_REG *) 0xFFFFF138) // (AIC) Debug Control Register (Protect) -#define AT91C_AIC_FFER ((AT91_REG *) 0xFFFFF140) // (AIC) Fast Forcing Enable Register -#define AT91C_AIC_SVR ((AT91_REG *) 0xFFFFF080) // (AIC) Source Vector Register -#define AT91C_AIC_SPU ((AT91_REG *) 0xFFFFF134) // (AIC) Spurious Vector Register -#define AT91C_AIC_FFDR ((AT91_REG *) 0xFFFFF144) // (AIC) Fast Forcing Disable Register -#define AT91C_AIC_FVR ((AT91_REG *) 0xFFFFF104) // (AIC) FIQ Vector Register -#define AT91C_AIC_FFSR ((AT91_REG *) 0xFFFFF148) // (AIC) Fast Forcing Status Register -#define AT91C_AIC_IMR ((AT91_REG *) 0xFFFFF110) // (AIC) Interrupt Mask Register -#define AT91C_AIC_ISR ((AT91_REG *) 0xFFFFF108) // (AIC) Interrupt Status Register -#define AT91C_AIC_IVR ((AT91_REG *) 0xFFFFF100) // (AIC) IRQ Vector Register -#define AT91C_AIC_IDCR ((AT91_REG *) 0xFFFFF124) // (AIC) Interrupt Disable Command Register -#define AT91C_AIC_CISR ((AT91_REG *) 0xFFFFF114) // (AIC) Core Interrupt Status Register -#define AT91C_AIC_IPR ((AT91_REG *) 0xFFFFF10C) // (AIC) Interrupt Pending Register -// ========== Register definition for PDC_SPI peripheral ========== -#define AT91C_SPI_PTCR ((AT91_REG *) 0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register -#define AT91C_SPI_TNPR ((AT91_REG *) 0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register -#define AT91C_SPI_RNPR ((AT91_REG *) 0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register -#define AT91C_SPI_TPR ((AT91_REG *) 0xFFFE0108) // (PDC_SPI) Transmit Pointer Register -#define AT91C_SPI_RPR ((AT91_REG *) 0xFFFE0100) // (PDC_SPI) Receive Pointer Register -#define AT91C_SPI_PTSR ((AT91_REG *) 0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register -#define AT91C_SPI_TNCR ((AT91_REG *) 0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register -#define AT91C_SPI_RNCR ((AT91_REG *) 0xFFFE0114) // (PDC_SPI) Receive Next Counter Register -#define AT91C_SPI_TCR ((AT91_REG *) 0xFFFE010C) // (PDC_SPI) Transmit Counter Register -#define AT91C_SPI_RCR ((AT91_REG *) 0xFFFE0104) // (PDC_SPI) Receive Counter Register -// ========== Register definition for SPI peripheral ========== -#define AT91C_SPI_CSR ((AT91_REG *) 0xFFFE0030) // (SPI) Chip Select Register -#define AT91C_SPI_IDR ((AT91_REG *) 0xFFFE0018) // (SPI) Interrupt Disable Register -#define AT91C_SPI_SR ((AT91_REG *) 0xFFFE0010) // (SPI) Status Register -#define AT91C_SPI_RDR ((AT91_REG *) 0xFFFE0008) // (SPI) Receive Data Register -#define AT91C_SPI_CR ((AT91_REG *) 0xFFFE0000) // (SPI) Control Register -#define AT91C_SPI_IMR ((AT91_REG *) 0xFFFE001C) // (SPI) Interrupt Mask Register -#define AT91C_SPI_IER ((AT91_REG *) 0xFFFE0014) // (SPI) Interrupt Enable Register -#define AT91C_SPI_TDR ((AT91_REG *) 0xFFFE000C) // (SPI) Transmit Data Register -#define AT91C_SPI_MR ((AT91_REG *) 0xFFFE0004) // (SPI) Mode Register -// ========== Register definition for PDC_SSC2 peripheral ========== -#define AT91C_SSC2_PTCR ((AT91_REG *) 0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register -#define AT91C_SSC2_TNPR ((AT91_REG *) 0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register -#define AT91C_SSC2_RNPR ((AT91_REG *) 0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register -#define AT91C_SSC2_TPR ((AT91_REG *) 0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register -#define AT91C_SSC2_RPR ((AT91_REG *) 0xFFFD8100) // (PDC_SSC2) Receive Pointer Register -#define AT91C_SSC2_PTSR ((AT91_REG *) 0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register -#define AT91C_SSC2_TNCR ((AT91_REG *) 0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register -#define AT91C_SSC2_RNCR ((AT91_REG *) 0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register -#define AT91C_SSC2_TCR ((AT91_REG *) 0xFFFD810C) // (PDC_SSC2) Transmit Counter Register -#define AT91C_SSC2_RCR ((AT91_REG *) 0xFFFD8104) // (PDC_SSC2) Receive Counter Register -// ========== Register definition for SSC2 peripheral ========== -#define AT91C_SSC2_IMR ((AT91_REG *) 0xFFFD804C) // (SSC2) Interrupt Mask Register -#define AT91C_SSC2_IER ((AT91_REG *) 0xFFFD8044) // (SSC2) Interrupt Enable Register -#define AT91C_SSC2_RC1R ((AT91_REG *) 0xFFFD803C) // (SSC2) Receive Compare 1 Register -#define AT91C_SSC2_TSHR ((AT91_REG *) 0xFFFD8034) // (SSC2) Transmit Sync Holding Register -#define AT91C_SSC2_CMR ((AT91_REG *) 0xFFFD8004) // (SSC2) Clock Mode Register -#define AT91C_SSC2_IDR ((AT91_REG *) 0xFFFD8048) // (SSC2) Interrupt Disable Register -#define AT91C_SSC2_TCMR ((AT91_REG *) 0xFFFD8018) // (SSC2) Transmit Clock Mode Register -#define AT91C_SSC2_RCMR ((AT91_REG *) 0xFFFD8010) // (SSC2) Receive Clock ModeRegister -#define AT91C_SSC2_CR ((AT91_REG *) 0xFFFD8000) // (SSC2) Control Register -#define AT91C_SSC2_RFMR ((AT91_REG *) 0xFFFD8014) // (SSC2) Receive Frame Mode Register -#define AT91C_SSC2_TFMR ((AT91_REG *) 0xFFFD801C) // (SSC2) Transmit Frame Mode Register -#define AT91C_SSC2_THR ((AT91_REG *) 0xFFFD8024) // (SSC2) Transmit Holding Register -#define AT91C_SSC2_SR ((AT91_REG *) 0xFFFD8040) // (SSC2) Status Register -#define AT91C_SSC2_RC0R ((AT91_REG *) 0xFFFD8038) // (SSC2) Receive Compare 0 Register -#define AT91C_SSC2_RSHR ((AT91_REG *) 0xFFFD8030) // (SSC2) Receive Sync Holding Register -#define AT91C_SSC2_RHR ((AT91_REG *) 0xFFFD8020) // (SSC2) Receive Holding Register -// ========== Register definition for PDC_SSC1 peripheral ========== -#define AT91C_SSC1_PTCR ((AT91_REG *) 0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register -#define AT91C_SSC1_TNPR ((AT91_REG *) 0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register -#define AT91C_SSC1_RNPR ((AT91_REG *) 0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register -#define AT91C_SSC1_TPR ((AT91_REG *) 0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register -#define AT91C_SSC1_RPR ((AT91_REG *) 0xFFFD4100) // (PDC_SSC1) Receive Pointer Register -#define AT91C_SSC1_PTSR ((AT91_REG *) 0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register -#define AT91C_SSC1_TNCR ((AT91_REG *) 0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register -#define AT91C_SSC1_RNCR ((AT91_REG *) 0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register -#define AT91C_SSC1_TCR ((AT91_REG *) 0xFFFD410C) // (PDC_SSC1) Transmit Counter Register -#define AT91C_SSC1_RCR ((AT91_REG *) 0xFFFD4104) // (PDC_SSC1) Receive Counter Register -// ========== Register definition for SSC1 peripheral ========== -#define AT91C_SSC1_RFMR ((AT91_REG *) 0xFFFD4014) // (SSC1) Receive Frame Mode Register -#define AT91C_SSC1_CMR ((AT91_REG *) 0xFFFD4004) // (SSC1) Clock Mode Register -#define AT91C_SSC1_IDR ((AT91_REG *) 0xFFFD4048) // (SSC1) Interrupt Disable Register -#define AT91C_SSC1_SR ((AT91_REG *) 0xFFFD4040) // (SSC1) Status Register -#define AT91C_SSC1_RC0R ((AT91_REG *) 0xFFFD4038) // (SSC1) Receive Compare 0 Register -#define AT91C_SSC1_RSHR ((AT91_REG *) 0xFFFD4030) // (SSC1) Receive Sync Holding Register -#define AT91C_SSC1_RHR ((AT91_REG *) 0xFFFD4020) // (SSC1) Receive Holding Register -#define AT91C_SSC1_TCMR ((AT91_REG *) 0xFFFD4018) // (SSC1) Transmit Clock Mode Register -#define AT91C_SSC1_RCMR ((AT91_REG *) 0xFFFD4010) // (SSC1) Receive Clock ModeRegister -#define AT91C_SSC1_CR ((AT91_REG *) 0xFFFD4000) // (SSC1) Control Register -#define AT91C_SSC1_IMR ((AT91_REG *) 0xFFFD404C) // (SSC1) Interrupt Mask Register -#define AT91C_SSC1_IER ((AT91_REG *) 0xFFFD4044) // (SSC1) Interrupt Enable Register -#define AT91C_SSC1_RC1R ((AT91_REG *) 0xFFFD403C) // (SSC1) Receive Compare 1 Register -#define AT91C_SSC1_TSHR ((AT91_REG *) 0xFFFD4034) // (SSC1) Transmit Sync Holding Register -#define AT91C_SSC1_THR ((AT91_REG *) 0xFFFD4024) // (SSC1) Transmit Holding Register -#define AT91C_SSC1_TFMR ((AT91_REG *) 0xFFFD401C) // (SSC1) Transmit Frame Mode Register -// ========== Register definition for PDC_SSC0 peripheral ========== -#define AT91C_SSC0_PTCR ((AT91_REG *) 0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register -#define AT91C_SSC0_TNPR ((AT91_REG *) 0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register -#define AT91C_SSC0_RNPR ((AT91_REG *) 0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register -#define AT91C_SSC0_TPR ((AT91_REG *) 0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register -#define AT91C_SSC0_RPR ((AT91_REG *) 0xFFFD0100) // (PDC_SSC0) Receive Pointer Register -#define AT91C_SSC0_PTSR ((AT91_REG *) 0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register -#define AT91C_SSC0_TNCR ((AT91_REG *) 0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register -#define AT91C_SSC0_RNCR ((AT91_REG *) 0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register -#define AT91C_SSC0_TCR ((AT91_REG *) 0xFFFD010C) // (PDC_SSC0) Transmit Counter Register -#define AT91C_SSC0_RCR ((AT91_REG *) 0xFFFD0104) // (PDC_SSC0) Receive Counter Register -// ========== Register definition for SSC0 peripheral ========== -#define AT91C_SSC0_IMR ((AT91_REG *) 0xFFFD004C) // (SSC0) Interrupt Mask Register -#define AT91C_SSC0_IER ((AT91_REG *) 0xFFFD0044) // (SSC0) Interrupt Enable Register -#define AT91C_SSC0_RC1R ((AT91_REG *) 0xFFFD003C) // (SSC0) Receive Compare 1 Register -#define AT91C_SSC0_TSHR ((AT91_REG *) 0xFFFD0034) // (SSC0) Transmit Sync Holding Register -#define AT91C_SSC0_THR ((AT91_REG *) 0xFFFD0024) // (SSC0) Transmit Holding Register -#define AT91C_SSC0_TFMR ((AT91_REG *) 0xFFFD001C) // (SSC0) Transmit Frame Mode Register -#define AT91C_SSC0_RFMR ((AT91_REG *) 0xFFFD0014) // (SSC0) Receive Frame Mode Register -#define AT91C_SSC0_CMR ((AT91_REG *) 0xFFFD0004) // (SSC0) Clock Mode Register -#define AT91C_SSC0_IDR ((AT91_REG *) 0xFFFD0048) // (SSC0) Interrupt Disable Register -#define AT91C_SSC0_SR ((AT91_REG *) 0xFFFD0040) // (SSC0) Status Register -#define AT91C_SSC0_RC0R ((AT91_REG *) 0xFFFD0038) // (SSC0) Receive Compare 0 Register -#define AT91C_SSC0_RSHR ((AT91_REG *) 0xFFFD0030) // (SSC0) Receive Sync Holding Register -#define AT91C_SSC0_RHR ((AT91_REG *) 0xFFFD0020) // (SSC0) Receive Holding Register -#define AT91C_SSC0_TCMR ((AT91_REG *) 0xFFFD0018) // (SSC0) Transmit Clock Mode Register -#define AT91C_SSC0_RCMR ((AT91_REG *) 0xFFFD0010) // (SSC0) Receive Clock ModeRegister -#define AT91C_SSC0_CR ((AT91_REG *) 0xFFFD0000) // (SSC0) Control Register -// ========== Register definition for PDC_US3 peripheral ========== -#define AT91C_US3_PTSR ((AT91_REG *) 0xFFFCC124) // (PDC_US3) PDC Transfer Status Register -#define AT91C_US3_TNCR ((AT91_REG *) 0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register -#define AT91C_US3_RNCR ((AT91_REG *) 0xFFFCC114) // (PDC_US3) Receive Next Counter Register -#define AT91C_US3_TCR ((AT91_REG *) 0xFFFCC10C) // (PDC_US3) Transmit Counter Register -#define AT91C_US3_RCR ((AT91_REG *) 0xFFFCC104) // (PDC_US3) Receive Counter Register -#define AT91C_US3_PTCR ((AT91_REG *) 0xFFFCC120) // (PDC_US3) PDC Transfer Control Register -#define AT91C_US3_TNPR ((AT91_REG *) 0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register -#define AT91C_US3_RNPR ((AT91_REG *) 0xFFFCC110) // (PDC_US3) Receive Next Pointer Register -#define AT91C_US3_TPR ((AT91_REG *) 0xFFFCC108) // (PDC_US3) Transmit Pointer Register -#define AT91C_US3_RPR ((AT91_REG *) 0xFFFCC100) // (PDC_US3) Receive Pointer Register -// ========== Register definition for US3 peripheral ========== -#define AT91C_US3_IF ((AT91_REG *) 0xFFFCC04C) // (US3) IRDA_FILTER Register -#define AT91C_US3_NER ((AT91_REG *) 0xFFFCC044) // (US3) Nb Errors Register -#define AT91C_US3_RTOR ((AT91_REG *) 0xFFFCC024) // (US3) Receiver Time-out Register -#define AT91C_US3_THR ((AT91_REG *) 0xFFFCC01C) // (US3) Transmitter Holding Register -#define AT91C_US3_CSR ((AT91_REG *) 0xFFFCC014) // (US3) Channel Status Register -#define AT91C_US3_IDR ((AT91_REG *) 0xFFFCC00C) // (US3) Interrupt Disable Register -#define AT91C_US3_MR ((AT91_REG *) 0xFFFCC004) // (US3) Mode Register -#define AT91C_US3_XXR ((AT91_REG *) 0xFFFCC048) // (US3) XON_XOFF Register -#define AT91C_US3_FIDI ((AT91_REG *) 0xFFFCC040) // (US3) FI_DI_Ratio Register -#define AT91C_US3_TTGR ((AT91_REG *) 0xFFFCC028) // (US3) Transmitter Time-guard Register -#define AT91C_US3_BRGR ((AT91_REG *) 0xFFFCC020) // (US3) Baud Rate Generator Register -#define AT91C_US3_RHR ((AT91_REG *) 0xFFFCC018) // (US3) Receiver Holding Register -#define AT91C_US3_IMR ((AT91_REG *) 0xFFFCC010) // (US3) Interrupt Mask Register -#define AT91C_US3_IER ((AT91_REG *) 0xFFFCC008) // (US3) Interrupt Enable Register -#define AT91C_US3_CR ((AT91_REG *) 0xFFFCC000) // (US3) Control Register -// ========== Register definition for PDC_US2 peripheral ========== -#define AT91C_US2_PTSR ((AT91_REG *) 0xFFFC8124) // (PDC_US2) PDC Transfer Status Register -#define AT91C_US2_TNCR ((AT91_REG *) 0xFFFC811C) // (PDC_US2) Transmit Next Counter Register -#define AT91C_US2_RNCR ((AT91_REG *) 0xFFFC8114) // (PDC_US2) Receive Next Counter Register -#define AT91C_US2_TCR ((AT91_REG *) 0xFFFC810C) // (PDC_US2) Transmit Counter Register -#define AT91C_US2_PTCR ((AT91_REG *) 0xFFFC8120) // (PDC_US2) PDC Transfer Control Register -#define AT91C_US2_RCR ((AT91_REG *) 0xFFFC8104) // (PDC_US2) Receive Counter Register -#define AT91C_US2_TNPR ((AT91_REG *) 0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register -#define AT91C_US2_RPR ((AT91_REG *) 0xFFFC8100) // (PDC_US2) Receive Pointer Register -#define AT91C_US2_TPR ((AT91_REG *) 0xFFFC8108) // (PDC_US2) Transmit Pointer Register -#define AT91C_US2_RNPR ((AT91_REG *) 0xFFFC8110) // (PDC_US2) Receive Next Pointer Register -// ========== Register definition for US2 peripheral ========== -#define AT91C_US2_XXR ((AT91_REG *) 0xFFFC8048) // (US2) XON_XOFF Register -#define AT91C_US2_FIDI ((AT91_REG *) 0xFFFC8040) // (US2) FI_DI_Ratio Register -#define AT91C_US2_TTGR ((AT91_REG *) 0xFFFC8028) // (US2) Transmitter Time-guard Register -#define AT91C_US2_BRGR ((AT91_REG *) 0xFFFC8020) // (US2) Baud Rate Generator Register -#define AT91C_US2_RHR ((AT91_REG *) 0xFFFC8018) // (US2) Receiver Holding Register -#define AT91C_US2_IMR ((AT91_REG *) 0xFFFC8010) // (US2) Interrupt Mask Register -#define AT91C_US2_IER ((AT91_REG *) 0xFFFC8008) // (US2) Interrupt Enable Register -#define AT91C_US2_CR ((AT91_REG *) 0xFFFC8000) // (US2) Control Register -#define AT91C_US2_IF ((AT91_REG *) 0xFFFC804C) // (US2) IRDA_FILTER Register -#define AT91C_US2_NER ((AT91_REG *) 0xFFFC8044) // (US2) Nb Errors Register -#define AT91C_US2_RTOR ((AT91_REG *) 0xFFFC8024) // (US2) Receiver Time-out Register -#define AT91C_US2_THR ((AT91_REG *) 0xFFFC801C) // (US2) Transmitter Holding Register -#define AT91C_US2_CSR ((AT91_REG *) 0xFFFC8014) // (US2) Channel Status Register -#define AT91C_US2_IDR ((AT91_REG *) 0xFFFC800C) // (US2) Interrupt Disable Register -#define AT91C_US2_MR ((AT91_REG *) 0xFFFC8004) // (US2) Mode Register -// ========== Register definition for PDC_US1 peripheral ========== -#define AT91C_US1_PTSR ((AT91_REG *) 0xFFFC4124) // (PDC_US1) PDC Transfer Status Register -#define AT91C_US1_TNCR ((AT91_REG *) 0xFFFC411C) // (PDC_US1) Transmit Next Counter Register -#define AT91C_US1_RNCR ((AT91_REG *) 0xFFFC4114) // (PDC_US1) Receive Next Counter Register -#define AT91C_US1_TCR ((AT91_REG *) 0xFFFC410C) // (PDC_US1) Transmit Counter Register -#define AT91C_US1_RCR ((AT91_REG *) 0xFFFC4104) // (PDC_US1) Receive Counter Register -#define AT91C_US1_PTCR ((AT91_REG *) 0xFFFC4120) // (PDC_US1) PDC Transfer Control Register -#define AT91C_US1_TNPR ((AT91_REG *) 0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register -#define AT91C_US1_RNPR ((AT91_REG *) 0xFFFC4110) // (PDC_US1) Receive Next Pointer Register -#define AT91C_US1_TPR ((AT91_REG *) 0xFFFC4108) // (PDC_US1) Transmit Pointer Register -#define AT91C_US1_RPR ((AT91_REG *) 0xFFFC4100) // (PDC_US1) Receive Pointer Register -// ========== Register definition for US1 peripheral ========== -#define AT91C_US1_XXR ((AT91_REG *) 0xFFFC4048) // (US1) XON_XOFF Register -#define AT91C_US1_RHR ((AT91_REG *) 0xFFFC4018) // (US1) Receiver Holding Register -#define AT91C_US1_IMR ((AT91_REG *) 0xFFFC4010) // (US1) Interrupt Mask Register -#define AT91C_US1_IER ((AT91_REG *) 0xFFFC4008) // (US1) Interrupt Enable Register -#define AT91C_US1_CR ((AT91_REG *) 0xFFFC4000) // (US1) Control Register -#define AT91C_US1_RTOR ((AT91_REG *) 0xFFFC4024) // (US1) Receiver Time-out Register -#define AT91C_US1_THR ((AT91_REG *) 0xFFFC401C) // (US1) Transmitter Holding Register -#define AT91C_US1_CSR ((AT91_REG *) 0xFFFC4014) // (US1) Channel Status Register -#define AT91C_US1_IDR ((AT91_REG *) 0xFFFC400C) // (US1) Interrupt Disable Register -#define AT91C_US1_FIDI ((AT91_REG *) 0xFFFC4040) // (US1) FI_DI_Ratio Register -#define AT91C_US1_BRGR ((AT91_REG *) 0xFFFC4020) // (US1) Baud Rate Generator Register -#define AT91C_US1_TTGR ((AT91_REG *) 0xFFFC4028) // (US1) Transmitter Time-guard Register -#define AT91C_US1_IF ((AT91_REG *) 0xFFFC404C) // (US1) IRDA_FILTER Register -#define AT91C_US1_NER ((AT91_REG *) 0xFFFC4044) // (US1) Nb Errors Register -#define AT91C_US1_MR ((AT91_REG *) 0xFFFC4004) // (US1) Mode Register -// ========== Register definition for PDC_US0 peripheral ========== -#define AT91C_US0_PTCR ((AT91_REG *) 0xFFFC0120) // (PDC_US0) PDC Transfer Control Register -#define AT91C_US0_TNPR ((AT91_REG *) 0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register -#define AT91C_US0_RNPR ((AT91_REG *) 0xFFFC0110) // (PDC_US0) Receive Next Pointer Register -#define AT91C_US0_TPR ((AT91_REG *) 0xFFFC0108) // (PDC_US0) Transmit Pointer Register -#define AT91C_US0_RPR ((AT91_REG *) 0xFFFC0100) // (PDC_US0) Receive Pointer Register -#define AT91C_US0_PTSR ((AT91_REG *) 0xFFFC0124) // (PDC_US0) PDC Transfer Status Register -#define AT91C_US0_TNCR ((AT91_REG *) 0xFFFC011C) // (PDC_US0) Transmit Next Counter Register -#define AT91C_US0_RNCR ((AT91_REG *) 0xFFFC0114) // (PDC_US0) Receive Next Counter Register -#define AT91C_US0_TCR ((AT91_REG *) 0xFFFC010C) // (PDC_US0) Transmit Counter Register -#define AT91C_US0_RCR ((AT91_REG *) 0xFFFC0104) // (PDC_US0) Receive Counter Register -// ========== Register definition for US0 peripheral ========== -#define AT91C_US0_TTGR ((AT91_REG *) 0xFFFC0028) // (US0) Transmitter Time-guard Register -#define AT91C_US0_BRGR ((AT91_REG *) 0xFFFC0020) // (US0) Baud Rate Generator Register -#define AT91C_US0_RHR ((AT91_REG *) 0xFFFC0018) // (US0) Receiver Holding Register -#define AT91C_US0_IMR ((AT91_REG *) 0xFFFC0010) // (US0) Interrupt Mask Register -#define AT91C_US0_NER ((AT91_REG *) 0xFFFC0044) // (US0) Nb Errors Register -#define AT91C_US0_RTOR ((AT91_REG *) 0xFFFC0024) // (US0) Receiver Time-out Register -#define AT91C_US0_XXR ((AT91_REG *) 0xFFFC0048) // (US0) XON_XOFF Register -#define AT91C_US0_FIDI ((AT91_REG *) 0xFFFC0040) // (US0) FI_DI_Ratio Register -#define AT91C_US0_CR ((AT91_REG *) 0xFFFC0000) // (US0) Control Register -#define AT91C_US0_IER ((AT91_REG *) 0xFFFC0008) // (US0) Interrupt Enable Register -#define AT91C_US0_IF ((AT91_REG *) 0xFFFC004C) // (US0) IRDA_FILTER Register -#define AT91C_US0_MR ((AT91_REG *) 0xFFFC0004) // (US0) Mode Register -#define AT91C_US0_IDR ((AT91_REG *) 0xFFFC000C) // (US0) Interrupt Disable Register -#define AT91C_US0_CSR ((AT91_REG *) 0xFFFC0014) // (US0) Channel Status Register -#define AT91C_US0_THR ((AT91_REG *) 0xFFFC001C) // (US0) Transmitter Holding Register -// ========== Register definition for TWI peripheral ========== -#define AT91C_TWI_RHR ((AT91_REG *) 0xFFFB8030) // (TWI) Receive Holding Register -#define AT91C_TWI_IDR ((AT91_REG *) 0xFFFB8028) // (TWI) Interrupt Disable Register -#define AT91C_TWI_SR ((AT91_REG *) 0xFFFB8020) // (TWI) Status Register -#define AT91C_TWI_CWGR ((AT91_REG *) 0xFFFB8010) // (TWI) Clock Waveform Generator Register -#define AT91C_TWI_SMR ((AT91_REG *) 0xFFFB8008) // (TWI) Slave Mode Register -#define AT91C_TWI_CR ((AT91_REG *) 0xFFFB8000) // (TWI) Control Register -#define AT91C_TWI_THR ((AT91_REG *) 0xFFFB8034) // (TWI) Transmit Holding Register -#define AT91C_TWI_IMR ((AT91_REG *) 0xFFFB802C) // (TWI) Interrupt Mask Register -#define AT91C_TWI_IER ((AT91_REG *) 0xFFFB8024) // (TWI) Interrupt Enable Register -#define AT91C_TWI_IADR ((AT91_REG *) 0xFFFB800C) // (TWI) Internal Address Register -#define AT91C_TWI_MMR ((AT91_REG *) 0xFFFB8004) // (TWI) Master Mode Register -// ========== Register definition for PDC_MCI peripheral ========== -#define AT91C_MCI_PTCR ((AT91_REG *) 0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register -#define AT91C_MCI_TNPR ((AT91_REG *) 0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register -#define AT91C_MCI_RNPR ((AT91_REG *) 0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register -#define AT91C_MCI_TPR ((AT91_REG *) 0xFFFB4108) // (PDC_MCI) Transmit Pointer Register -#define AT91C_MCI_RPR ((AT91_REG *) 0xFFFB4100) // (PDC_MCI) Receive Pointer Register -#define AT91C_MCI_PTSR ((AT91_REG *) 0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register -#define AT91C_MCI_TNCR ((AT91_REG *) 0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register -#define AT91C_MCI_RNCR ((AT91_REG *) 0xFFFB4114) // (PDC_MCI) Receive Next Counter Register -#define AT91C_MCI_TCR ((AT91_REG *) 0xFFFB410C) // (PDC_MCI) Transmit Counter Register -#define AT91C_MCI_RCR ((AT91_REG *) 0xFFFB4104) // (PDC_MCI) Receive Counter Register -// ========== Register definition for MCI peripheral ========== -#define AT91C_MCI_IDR ((AT91_REG *) 0xFFFB4048) // (MCI) MCI Interrupt Disable Register -#define AT91C_MCI_SR ((AT91_REG *) 0xFFFB4040) // (MCI) MCI Status Register -#define AT91C_MCI_RDR ((AT91_REG *) 0xFFFB4030) // (MCI) MCI Receive Data Register -#define AT91C_MCI_RSPR ((AT91_REG *) 0xFFFB4020) // (MCI) MCI Response Register -#define AT91C_MCI_ARGR ((AT91_REG *) 0xFFFB4010) // (MCI) MCI Argument Register -#define AT91C_MCI_DTOR ((AT91_REG *) 0xFFFB4008) // (MCI) MCI Data Timeout Register -#define AT91C_MCI_CR ((AT91_REG *) 0xFFFB4000) // (MCI) MCI Control Register -#define AT91C_MCI_IMR ((AT91_REG *) 0xFFFB404C) // (MCI) MCI Interrupt Mask Register -#define AT91C_MCI_IER ((AT91_REG *) 0xFFFB4044) // (MCI) MCI Interrupt Enable Register -#define AT91C_MCI_TDR ((AT91_REG *) 0xFFFB4034) // (MCI) MCI Transmit Data Register -#define AT91C_MCI_CMDR ((AT91_REG *) 0xFFFB4014) // (MCI) MCI Command Register -#define AT91C_MCI_SDCR ((AT91_REG *) 0xFFFB400C) // (MCI) MCI SD Card Register -#define AT91C_MCI_MR ((AT91_REG *) 0xFFFB4004) // (MCI) MCI Mode Register -// ========== Register definition for UDP peripheral ========== -#define AT91C_UDP_ISR ((AT91_REG *) 0xFFFB001C) // (UDP) Interrupt Status Register -#define AT91C_UDP_IDR ((AT91_REG *) 0xFFFB0014) // (UDP) Interrupt Disable Register -#define AT91C_UDP_GLBSTATE ((AT91_REG *) 0xFFFB0004) // (UDP) Global State Register -#define AT91C_UDP_FDR ((AT91_REG *) 0xFFFB0050) // (UDP) Endpoint FIFO Data Register -#define AT91C_UDP_CSR ((AT91_REG *) 0xFFFB0030) // (UDP) Endpoint Control and Status Register -#define AT91C_UDP_RSTEP ((AT91_REG *) 0xFFFB0028) // (UDP) Reset Endpoint Register -#define AT91C_UDP_ICR ((AT91_REG *) 0xFFFB0020) // (UDP) Interrupt Clear Register -#define AT91C_UDP_IMR ((AT91_REG *) 0xFFFB0018) // (UDP) Interrupt Mask Register -#define AT91C_UDP_IER ((AT91_REG *) 0xFFFB0010) // (UDP) Interrupt Enable Register -#define AT91C_UDP_FADDR ((AT91_REG *) 0xFFFB0008) // (UDP) Function Address Register -#define AT91C_UDP_NUM ((AT91_REG *) 0xFFFB0000) // (UDP) Frame Number Register -// ========== Register definition for TC5 peripheral ========== -#define AT91C_TC5_CMR ((AT91_REG *) 0xFFFA4084) // (TC5) Channel Mode Register -#define AT91C_TC5_IDR ((AT91_REG *) 0xFFFA40A8) // (TC5) Interrupt Disable Register -#define AT91C_TC5_SR ((AT91_REG *) 0xFFFA40A0) // (TC5) Status Register -#define AT91C_TC5_RB ((AT91_REG *) 0xFFFA4098) // (TC5) Register B -#define AT91C_TC5_CV ((AT91_REG *) 0xFFFA4090) // (TC5) Counter Value -#define AT91C_TC5_CCR ((AT91_REG *) 0xFFFA4080) // (TC5) Channel Control Register -#define AT91C_TC5_IMR ((AT91_REG *) 0xFFFA40AC) // (TC5) Interrupt Mask Register -#define AT91C_TC5_IER ((AT91_REG *) 0xFFFA40A4) // (TC5) Interrupt Enable Register -#define AT91C_TC5_RC ((AT91_REG *) 0xFFFA409C) // (TC5) Register C -#define AT91C_TC5_RA ((AT91_REG *) 0xFFFA4094) // (TC5) Register A -// ========== Register definition for TC4 peripheral ========== -#define AT91C_TC4_IMR ((AT91_REG *) 0xFFFA406C) // (TC4) Interrupt Mask Register -#define AT91C_TC4_IER ((AT91_REG *) 0xFFFA4064) // (TC4) Interrupt Enable Register -#define AT91C_TC4_RC ((AT91_REG *) 0xFFFA405C) // (TC4) Register C -#define AT91C_TC4_RA ((AT91_REG *) 0xFFFA4054) // (TC4) Register A -#define AT91C_TC4_CMR ((AT91_REG *) 0xFFFA4044) // (TC4) Channel Mode Register -#define AT91C_TC4_IDR ((AT91_REG *) 0xFFFA4068) // (TC4) Interrupt Disable Register -#define AT91C_TC4_SR ((AT91_REG *) 0xFFFA4060) // (TC4) Status Register -#define AT91C_TC4_RB ((AT91_REG *) 0xFFFA4058) // (TC4) Register B -#define AT91C_TC4_CV ((AT91_REG *) 0xFFFA4050) // (TC4) Counter Value -#define AT91C_TC4_CCR ((AT91_REG *) 0xFFFA4040) // (TC4) Channel Control Register -// ========== Register definition for TC3 peripheral ========== -#define AT91C_TC3_IMR ((AT91_REG *) 0xFFFA402C) // (TC3) Interrupt Mask Register -#define AT91C_TC3_CV ((AT91_REG *) 0xFFFA4010) // (TC3) Counter Value -#define AT91C_TC3_CCR ((AT91_REG *) 0xFFFA4000) // (TC3) Channel Control Register -#define AT91C_TC3_IER ((AT91_REG *) 0xFFFA4024) // (TC3) Interrupt Enable Register -#define AT91C_TC3_CMR ((AT91_REG *) 0xFFFA4004) // (TC3) Channel Mode Register -#define AT91C_TC3_RA ((AT91_REG *) 0xFFFA4014) // (TC3) Register A -#define AT91C_TC3_RC ((AT91_REG *) 0xFFFA401C) // (TC3) Register C -#define AT91C_TC3_IDR ((AT91_REG *) 0xFFFA4028) // (TC3) Interrupt Disable Register -#define AT91C_TC3_RB ((AT91_REG *) 0xFFFA4018) // (TC3) Register B -#define AT91C_TC3_SR ((AT91_REG *) 0xFFFA4020) // (TC3) Status Register -// ========== Register definition for TCB1 peripheral ========== -#define AT91C_TCB1_BCR ((AT91_REG *) 0xFFFA4140) // (TCB1) TC Block Control Register -#define AT91C_TCB1_BMR ((AT91_REG *) 0xFFFA4144) // (TCB1) TC Block Mode Register -// ========== Register definition for TC2 peripheral ========== -#define AT91C_TC2_IMR ((AT91_REG *) 0xFFFA00AC) // (TC2) Interrupt Mask Register -#define AT91C_TC2_IER ((AT91_REG *) 0xFFFA00A4) // (TC2) Interrupt Enable Register -#define AT91C_TC2_RC ((AT91_REG *) 0xFFFA009C) // (TC2) Register C -#define AT91C_TC2_RA ((AT91_REG *) 0xFFFA0094) // (TC2) Register A -#define AT91C_TC2_CMR ((AT91_REG *) 0xFFFA0084) // (TC2) Channel Mode Register -#define AT91C_TC2_IDR ((AT91_REG *) 0xFFFA00A8) // (TC2) Interrupt Disable Register -#define AT91C_TC2_SR ((AT91_REG *) 0xFFFA00A0) // (TC2) Status Register -#define AT91C_TC2_RB ((AT91_REG *) 0xFFFA0098) // (TC2) Register B -#define AT91C_TC2_CV ((AT91_REG *) 0xFFFA0090) // (TC2) Counter Value -#define AT91C_TC2_CCR ((AT91_REG *) 0xFFFA0080) // (TC2) Channel Control Register -// ========== Register definition for TC1 peripheral ========== -#define AT91C_TC1_IMR ((AT91_REG *) 0xFFFA006C) // (TC1) Interrupt Mask Register -#define AT91C_TC1_IER ((AT91_REG *) 0xFFFA0064) // (TC1) Interrupt Enable Register -#define AT91C_TC1_RC ((AT91_REG *) 0xFFFA005C) // (TC1) Register C -#define AT91C_TC1_RA ((AT91_REG *) 0xFFFA0054) // (TC1) Register A -#define AT91C_TC1_CMR ((AT91_REG *) 0xFFFA0044) // (TC1) Channel Mode Register -#define AT91C_TC1_IDR ((AT91_REG *) 0xFFFA0068) // (TC1) Interrupt Disable Register -#define AT91C_TC1_SR ((AT91_REG *) 0xFFFA0060) // (TC1) Status Register -#define AT91C_TC1_RB ((AT91_REG *) 0xFFFA0058) // (TC1) Register B -#define AT91C_TC1_CV ((AT91_REG *) 0xFFFA0050) // (TC1) Counter Value -#define AT91C_TC1_CCR ((AT91_REG *) 0xFFFA0040) // (TC1) Channel Control Register -// ========== Register definition for TC0 peripheral ========== -#define AT91C_TC0_IMR ((AT91_REG *) 0xFFFA002C) // (TC0) Interrupt Mask Register -#define AT91C_TC0_IER ((AT91_REG *) 0xFFFA0024) // (TC0) Interrupt Enable Register -#define AT91C_TC0_RC ((AT91_REG *) 0xFFFA001C) // (TC0) Register C -#define AT91C_TC0_RA ((AT91_REG *) 0xFFFA0014) // (TC0) Register A -#define AT91C_TC0_CMR ((AT91_REG *) 0xFFFA0004) // (TC0) Channel Mode Register -#define AT91C_TC0_IDR ((AT91_REG *) 0xFFFA0028) // (TC0) Interrupt Disable Register -#define AT91C_TC0_SR ((AT91_REG *) 0xFFFA0020) // (TC0) Status Register -#define AT91C_TC0_RB ((AT91_REG *) 0xFFFA0018) // (TC0) Register B -#define AT91C_TC0_CV ((AT91_REG *) 0xFFFA0010) // (TC0) Counter Value -#define AT91C_TC0_CCR ((AT91_REG *) 0xFFFA0000) // (TC0) Channel Control Register -// ========== Register definition for TCB0 peripheral ========== -#define AT91C_TCB0_BMR ((AT91_REG *) 0xFFFA00C4) // (TCB0) TC Block Mode Register -#define AT91C_TCB0_BCR ((AT91_REG *) 0xFFFA00C0) // (TCB0) TC Block Control Register -// ========== Register definition for UHP peripheral ========== -#define AT91C_UHP_HcRhDescriptorA ((AT91_REG *) 0x00300048) // (UHP) Root Hub characteristics A -#define AT91C_UHP_HcRhPortStatus ((AT91_REG *) 0x00300054) // (UHP) Root Hub Port Status Register -#define AT91C_UHP_HcRhDescriptorB ((AT91_REG *) 0x0030004C) // (UHP) Root Hub characteristics B -#define AT91C_UHP_HcControl ((AT91_REG *) 0x00300004) // (UHP) Operating modes for the Host Controller -#define AT91C_UHP_HcInterruptStatus ((AT91_REG *) 0x0030000C) // (UHP) Interrupt Status Register -#define AT91C_UHP_HcRhStatus ((AT91_REG *) 0x00300050) // (UHP) Root Hub Status register -#define AT91C_UHP_HcRevision ((AT91_REG *) 0x00300000) // (UHP) Revision -#define AT91C_UHP_HcCommandStatus ((AT91_REG *) 0x00300008) // (UHP) Command & status Register -#define AT91C_UHP_HcInterruptEnable ((AT91_REG *) 0x00300010) // (UHP) Interrupt Enable Register -#define AT91C_UHP_HcHCCA ((AT91_REG *) 0x00300018) // (UHP) Pointer to the Host Controller Communication Area -#define AT91C_UHP_HcControlHeadED ((AT91_REG *) 0x00300020) // (UHP) First Endpoint Descriptor of the Control list -#define AT91C_UHP_HcInterruptDisable ((AT91_REG *) 0x00300014) // (UHP) Interrupt Disable Register -#define AT91C_UHP_HcPeriodCurrentED ((AT91_REG *) 0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor -#define AT91C_UHP_HcControlCurrentED ((AT91_REG *) 0x00300024) // (UHP) Endpoint Control and Status Register -#define AT91C_UHP_HcBulkCurrentED ((AT91_REG *) 0x0030002C) // (UHP) Current endpoint of the Bulk list -#define AT91C_UHP_HcFmInterval ((AT91_REG *) 0x00300034) // (UHP) Bit time between 2 consecutive SOFs -#define AT91C_UHP_HcBulkHeadED ((AT91_REG *) 0x00300028) // (UHP) First endpoint register of the Bulk list -#define AT91C_UHP_HcBulkDoneHead ((AT91_REG *) 0x00300030) // (UHP) Last completed transfer descriptor -#define AT91C_UHP_HcFmRemaining ((AT91_REG *) 0x00300038) // (UHP) Bit time remaining in the current Frame -#define AT91C_UHP_HcPeriodicStart ((AT91_REG *) 0x00300040) // (UHP) Periodic Start -#define AT91C_UHP_HcLSThreshold ((AT91_REG *) 0x00300044) // (UHP) LS Threshold -#define AT91C_UHP_HcFmNumber ((AT91_REG *) 0x0030003C) // (UHP) Frame number -// ========== Register definition for EMAC peripheral ========== -#define AT91C_EMAC_RSR ((AT91_REG *) 0xFFFBC020) // (EMAC) Receive Status Register -#define AT91C_EMAC_MAN ((AT91_REG *) 0xFFFBC034) // (EMAC) PHY Maintenance Register -#define AT91C_EMAC_HSH ((AT91_REG *) 0xFFFBC090) // (EMAC) Hash Address High[63:32] -#define AT91C_EMAC_MCOL ((AT91_REG *) 0xFFFBC048) // (EMAC) Multiple Collision Frame Register -#define AT91C_EMAC_IER ((AT91_REG *) 0xFFFBC028) // (EMAC) Interrupt Enable Register -#define AT91C_EMAC_SA2H ((AT91_REG *) 0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes -#define AT91C_EMAC_HSL ((AT91_REG *) 0xFFFBC094) // (EMAC) Hash Address Low[31:0] -#define AT91C_EMAC_LCOL ((AT91_REG *) 0xFFFBC05C) // (EMAC) Late Collision Register -#define AT91C_EMAC_OK ((AT91_REG *) 0xFFFBC04C) // (EMAC) Frames Received OK Register -#define AT91C_EMAC_CFG ((AT91_REG *) 0xFFFBC004) // (EMAC) Network Configuration Register -#define AT91C_EMAC_SA3L ((AT91_REG *) 0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes -#define AT91C_EMAC_SEQE ((AT91_REG *) 0xFFFBC050) // (EMAC) Frame Check Sequence Error Register -#define AT91C_EMAC_ECOL ((AT91_REG *) 0xFFFBC060) // (EMAC) Excessive Collision Register -#define AT91C_EMAC_ELR ((AT91_REG *) 0xFFFBC070) // (EMAC) Excessive Length Error Register -#define AT91C_EMAC_SR ((AT91_REG *) 0xFFFBC008) // (EMAC) Network Status Register -#define AT91C_EMAC_RBQP ((AT91_REG *) 0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer -#define AT91C_EMAC_CSE ((AT91_REG *) 0xFFFBC064) // (EMAC) Carrier Sense Error Register -#define AT91C_EMAC_RJB ((AT91_REG *) 0xFFFBC074) // (EMAC) Receive Jabber Register -#define AT91C_EMAC_USF ((AT91_REG *) 0xFFFBC078) // (EMAC) Undersize Frame Register -#define AT91C_EMAC_IDR ((AT91_REG *) 0xFFFBC02C) // (EMAC) Interrupt Disable Register -#define AT91C_EMAC_SA1L ((AT91_REG *) 0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes -#define AT91C_EMAC_IMR ((AT91_REG *) 0xFFFBC030) // (EMAC) Interrupt Mask Register -#define AT91C_EMAC_FRA ((AT91_REG *) 0xFFFBC040) // (EMAC) Frames Transmitted OK Register -#define AT91C_EMAC_SA3H ((AT91_REG *) 0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes -#define AT91C_EMAC_SA1H ((AT91_REG *) 0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes -#define AT91C_EMAC_SCOL ((AT91_REG *) 0xFFFBC044) // (EMAC) Single Collision Frame Register -#define AT91C_EMAC_ALE ((AT91_REG *) 0xFFFBC054) // (EMAC) Alignment Error Register -#define AT91C_EMAC_TAR ((AT91_REG *) 0xFFFBC00C) // (EMAC) Transmit Address Register -#define AT91C_EMAC_SA4L ((AT91_REG *) 0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes -#define AT91C_EMAC_SA2L ((AT91_REG *) 0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes -#define AT91C_EMAC_TUE ((AT91_REG *) 0xFFFBC068) // (EMAC) Transmit Underrun Error Register -#define AT91C_EMAC_DTE ((AT91_REG *) 0xFFFBC058) // (EMAC) Deferred Transmission Frame Register -#define AT91C_EMAC_TCR ((AT91_REG *) 0xFFFBC010) // (EMAC) Transmit Control Register -#define AT91C_EMAC_CTL ((AT91_REG *) 0xFFFBC000) // (EMAC) Network Control Register -#define AT91C_EMAC_SA4H ((AT91_REG *) 0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr -#define AT91C_EMAC_CDE ((AT91_REG *) 0xFFFBC06C) // (EMAC) Code Error Register -#define AT91C_EMAC_SQEE ((AT91_REG *) 0xFFFBC07C) // (EMAC) SQE Test Error Register -#define AT91C_EMAC_TSR ((AT91_REG *) 0xFFFBC014) // (EMAC) Transmit Status Register -#define AT91C_EMAC_DRFC ((AT91_REG *) 0xFFFBC080) // (EMAC) Discarded RX Frame Register -// ========== Register definition for EBI peripheral ========== -#define AT91C_EBI_CFGR ((AT91_REG *) 0xFFFFFF64) // (EBI) Configuration Register -#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) // (EBI) Chip Select Assignment Register -// ========== Register definition for SMC2 peripheral ========== -#define AT91C_SMC2_CSR ((AT91_REG *) 0xFFFFFF70) // (SMC2) SMC2 Chip Select Register -// ========== Register definition for SDRC peripheral ========== -#define AT91C_SDRC_IMR ((AT91_REG *) 0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IER ((AT91_REG *) 0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register -#define AT91C_SDRC_SRR ((AT91_REG *) 0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register -#define AT91C_SDRC_TR ((AT91_REG *) 0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register -#define AT91C_SDRC_ISR ((AT91_REG *) 0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IDR ((AT91_REG *) 0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register -#define AT91C_SDRC_LPR ((AT91_REG *) 0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register -#define AT91C_SDRC_CR ((AT91_REG *) 0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register -#define AT91C_SDRC_MR ((AT91_REG *) 0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register -// ========== Register definition for BFC peripheral ========== -#define AT91C_BFC_MR ((AT91_REG *) 0xFFFFFFC0) // (BFC) BFC Mode Register - -// ***************************************************************************** -// PIO DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_PIO_PA0 ((unsigned int) 1 << 0) // Pin Controlled by PA0 -#define AT91C_PA0_MISO ((unsigned int) AT91C_PIO_PA0) // SPI Master In Slave -#define AT91C_PA0_PCK3 ((unsigned int) AT91C_PIO_PA0) // PMC Programmable Clock Output 3 -#define AT91C_PIO_PA1 ((unsigned int) 1 << 1) // Pin Controlled by PA1 -#define AT91C_PA1_MOSI ((unsigned int) AT91C_PIO_PA1) // SPI Master Out Slave -#define AT91C_PA1_PCK0 ((unsigned int) AT91C_PIO_PA1) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PA10 ((unsigned int) 1 << 10) // Pin Controlled by PA10 -#define AT91C_PA10_ETX1 ((unsigned int) AT91C_PIO_PA10) // Ethernet MAC Transmit Data 1 -#define AT91C_PA10_MCDB1 ((unsigned int) AT91C_PIO_PA10) // Multimedia Card B Data 1 -#define AT91C_PIO_PA11 ((unsigned int) 1 << 11) // Pin Controlled by PA11 -#define AT91C_PA11_ECRS_ECRSDV ((unsigned int) AT91C_PIO_PA11) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid -#define AT91C_PA11_MCDB2 ((unsigned int) AT91C_PIO_PA11) // Multimedia Card B Data 2 -#define AT91C_PIO_PA12 ((unsigned int) 1 << 12) // Pin Controlled by PA12 -#define AT91C_PA12_ERX0 ((unsigned int) AT91C_PIO_PA12) // Ethernet MAC Receive Data 0 -#define AT91C_PA12_MCDB3 ((unsigned int) AT91C_PIO_PA12) // Multimedia Card B Data 3 -#define AT91C_PIO_PA13 ((unsigned int) 1 << 13) // Pin Controlled by PA13 -#define AT91C_PA13_ERX1 ((unsigned int) AT91C_PIO_PA13) // Ethernet MAC Receive Data 1 -#define AT91C_PA13_TCLK0 ((unsigned int) AT91C_PIO_PA13) // Timer Counter 0 external clock input -#define AT91C_PIO_PA14 ((unsigned int) 1 << 14) // Pin Controlled by PA14 -#define AT91C_PA14_ERXER ((unsigned int) AT91C_PIO_PA14) // Ethernet MAC Receive Error -#define AT91C_PA14_TCLK1 ((unsigned int) AT91C_PIO_PA14) // Timer Counter 1 external clock input -#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) // Pin Controlled by PA15 -#define AT91C_PA15_EMDC ((unsigned int) AT91C_PIO_PA15) // Ethernet MAC Management Data Clock -#define AT91C_PA15_TCLK2 ((unsigned int) AT91C_PIO_PA15) // Timer Counter 2 external clock input -#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) // Pin Controlled by PA16 -#define AT91C_PA16_EMDIO ((unsigned int) AT91C_PIO_PA16) // Ethernet MAC Management Data Input/Output -#define AT91C_PA16_IRQ6 ((unsigned int) AT91C_PIO_PA16) // AIC Interrupt input 6 -#define AT91C_PIO_PA17 ((unsigned int) 1 << 17) // Pin Controlled by PA17 -#define AT91C_PA17_TXD0 ((unsigned int) AT91C_PIO_PA17) // USART 0 Transmit Data -#define AT91C_PA17_TIOA0 ((unsigned int) AT91C_PIO_PA17) // Timer Counter 0 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA18 ((unsigned int) 1 << 18) // Pin Controlled by PA18 -#define AT91C_PA18_RXD0 ((unsigned int) AT91C_PIO_PA18) // USART 0 Receive Data -#define AT91C_PA18_TIOB0 ((unsigned int) AT91C_PIO_PA18) // Timer Counter 0 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) // Pin Controlled by PA19 -#define AT91C_PA19_SCK0 ((unsigned int) AT91C_PIO_PA19) // USART 0 Serial Clock -#define AT91C_PA19_TIOA1 ((unsigned int) AT91C_PIO_PA19) // Timer Counter 1 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA2 ((unsigned int) 1 << 2) // Pin Controlled by PA2 -#define AT91C_PA2_SPCK ((unsigned int) AT91C_PIO_PA2) // SPI Serial Clock -#define AT91C_PA2_IRQ4 ((unsigned int) AT91C_PIO_PA2) // AIC Interrupt Input 4 -#define AT91C_PIO_PA20 ((unsigned int) 1 << 20) // Pin Controlled by PA20 -#define AT91C_PA20_CTS0 ((unsigned int) AT91C_PIO_PA20) // USART 0 Clear To Send -#define AT91C_PA20_TIOB1 ((unsigned int) AT91C_PIO_PA20) // Timer Counter 1 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA21 ((unsigned int) 1 << 21) // Pin Controlled by PA21 -#define AT91C_PA21_RTS0 ((unsigned int) AT91C_PIO_PA21) // Usart 0 Ready To Send -#define AT91C_PA21_TIOA2 ((unsigned int) AT91C_PIO_PA21) // Timer Counter 2 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) // Pin Controlled by PA22 -#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) // USART 2 Receive Data -#define AT91C_PA22_TIOB2 ((unsigned int) AT91C_PIO_PA22) // Timer Counter 2 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA23 ((unsigned int) 1 << 23) // Pin Controlled by PA23 -#define AT91C_PA23_TXD2 ((unsigned int) AT91C_PIO_PA23) // USART 2 Transmit Data -#define AT91C_PA23_IRQ3 ((unsigned int) AT91C_PIO_PA23) // Interrupt input 3 -#define AT91C_PIO_PA24 ((unsigned int) 1 << 24) // Pin Controlled by PA24 -#define AT91C_PA24_SCK2 ((unsigned int) AT91C_PIO_PA24) // USART2 Serial Clock -#define AT91C_PA24_PCK1 ((unsigned int) AT91C_PIO_PA24) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA25 ((unsigned int) 1 << 25) // Pin Controlled by PA25 -#define AT91C_PA25_TWD ((unsigned int) AT91C_PIO_PA25) // TWI Two-wire Serial Data -#define AT91C_PA25_IRQ2 ((unsigned int) AT91C_PIO_PA25) // Interrupt input 2 -#define AT91C_PIO_PA26 ((unsigned int) 1 << 26) // Pin Controlled by PA26 -#define AT91C_PA26_TWCK ((unsigned int) AT91C_PIO_PA26) // TWI Two-wire Serial Clock -#define AT91C_PA26_IRQ1 ((unsigned int) AT91C_PIO_PA26) // Interrupt input 1 -#define AT91C_PIO_PA27 ((unsigned int) 1 << 27) // Pin Controlled by PA27 -#define AT91C_PA27_MCCK ((unsigned int) AT91C_PIO_PA27) // Multimedia Card Clock -#define AT91C_PA27_TCLK3 ((unsigned int) AT91C_PIO_PA27) // Timer Counter 3 External Clock Input -#define AT91C_PIO_PA28 ((unsigned int) 1 << 28) // Pin Controlled by PA28 -#define AT91C_PA28_MCCDA ((unsigned int) AT91C_PIO_PA28) // Multimedia Card A Command -#define AT91C_PA28_TCLK4 ((unsigned int) AT91C_PIO_PA28) // Timer Counter 4 external Clock Input -#define AT91C_PIO_PA29 ((unsigned int) 1 << 29) // Pin Controlled by PA29 -#define AT91C_PA29_MCDA0 ((unsigned int) AT91C_PIO_PA29) // Multimedia Card A Data 0 -#define AT91C_PA29_TCLK5 ((unsigned int) AT91C_PIO_PA29) // Timer Counter 5 external clock input -#define AT91C_PIO_PA3 ((unsigned int) 1 << 3) // Pin Controlled by PA3 -#define AT91C_PA3_NPCS0 ((unsigned int) AT91C_PIO_PA3) // SPI Peripheral Chip Select 0 -#define AT91C_PA3_IRQ5 ((unsigned int) AT91C_PIO_PA3) // AIC Interrupt Input 5 -#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) // Pin Controlled by PA30 -#define AT91C_PA30_DRXD ((unsigned int) AT91C_PIO_PA30) // DBGU Debug Receive Data -#define AT91C_PA30_CTS2 ((unsigned int) AT91C_PIO_PA30) // Usart 2 Clear To Send -#define AT91C_PIO_PA31 ((unsigned int) 1 << 31) // Pin Controlled by PA31 -#define AT91C_PA31_DTXD ((unsigned int) AT91C_PIO_PA31) // DBGU Debug Transmit Data -#define AT91C_PA31_RTS2 ((unsigned int) AT91C_PIO_PA31) // USART 2 Ready To Send -#define AT91C_PIO_PA4 ((unsigned int) 1 << 4) // Pin Controlled by PA4 -#define AT91C_PA4_NPCS1 ((unsigned int) AT91C_PIO_PA4) // SPI Peripheral Chip Select 1 -#define AT91C_PA4_PCK1 ((unsigned int) AT91C_PIO_PA4) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA5 ((unsigned int) 1 << 5) // Pin Controlled by PA5 -#define AT91C_PA5_NPCS2 ((unsigned int) AT91C_PIO_PA5) // SPI Peripheral Chip Select 2 -#define AT91C_PA5_TXD3 ((unsigned int) AT91C_PIO_PA5) // USART 3 Transmit Data -#define AT91C_PIO_PA6 ((unsigned int) 1 << 6) // Pin Controlled by PA6 -#define AT91C_PA6_NPCS3 ((unsigned int) AT91C_PIO_PA6) // SPI Peripheral Chip Select 3 -#define AT91C_PA6_RXD3 ((unsigned int) AT91C_PIO_PA6) // USART 3 Receive Data -#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) // Pin Controlled by PA7 -#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) // Ethernet MAC Transmit Clock/Reference Clock -#define AT91C_PA7_PCK2 ((unsigned int) AT91C_PIO_PA7) // PMC Programmable Clock 2 -#define AT91C_PIO_PA8 ((unsigned int) 1 << 8) // Pin Controlled by PA8 -#define AT91C_PA8_ETXEN ((unsigned int) AT91C_PIO_PA8) // Ethernet MAC Transmit Enable -#define AT91C_PA8_MCCDB ((unsigned int) AT91C_PIO_PA8) // Multimedia Card B Command -#define AT91C_PIO_PA9 ((unsigned int) 1 << 9) // Pin Controlled by PA9 -#define AT91C_PA9_ETX0 ((unsigned int) AT91C_PIO_PA9) // Ethernet MAC Transmit Data 0 -#define AT91C_PA9_MCDB0 ((unsigned int) AT91C_PIO_PA9) // Multimedia Card B Data 0 -#define AT91C_PIO_PB0 ((unsigned int) 1 << 0) // Pin Controlled by PB0 -#define AT91C_PB0_TF0 ((unsigned int) AT91C_PIO_PB0) // SSC Transmit Frame Sync 0 -#define AT91C_PB0_TIOB3 ((unsigned int) AT91C_PIO_PB0) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) // Pin Controlled by PB1 -#define AT91C_PB1_TK0 ((unsigned int) AT91C_PIO_PB1) // SSC Transmit Clock 0 -#define AT91C_PB1_CTS3 ((unsigned int) AT91C_PIO_PB1) // USART 3 Clear To Send -#define AT91C_PIO_PB10 ((unsigned int) 1 << 10) // Pin Controlled by PB10 -#define AT91C_PB10_RK1 ((unsigned int) AT91C_PIO_PB10) // SSC Receive Clock 1 -#define AT91C_PB10_TIOA5 ((unsigned int) AT91C_PIO_PB10) // Timer Counter 5 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB11 ((unsigned int) 1 << 11) // Pin Controlled by PB11 -#define AT91C_PB11_RF1 ((unsigned int) AT91C_PIO_PB11) // SSC Receive Frame Sync 1 -#define AT91C_PB11_TIOB5 ((unsigned int) AT91C_PIO_PB11) // Timer Counter 5 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB12 ((unsigned int) 1 << 12) // Pin Controlled by PB12 -#define AT91C_PB12_TF2 ((unsigned int) AT91C_PIO_PB12) // SSC Transmit Frame Sync 2 -#define AT91C_PB12_ETX2 ((unsigned int) AT91C_PIO_PB12) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PB13 ((unsigned int) 1 << 13) // Pin Controlled by PB13 -#define AT91C_PB13_TK2 ((unsigned int) AT91C_PIO_PB13) // SSC Transmit Clock 2 -#define AT91C_PB13_ETX3 ((unsigned int) AT91C_PIO_PB13) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PB14 ((unsigned int) 1 << 14) // Pin Controlled by PB14 -#define AT91C_PB14_TD2 ((unsigned int) AT91C_PIO_PB14) // SSC Transmit Data 2 -#define AT91C_PB14_ETXER ((unsigned int) AT91C_PIO_PB14) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PB15 ((unsigned int) 1 << 15) // Pin Controlled by PB15 -#define AT91C_PB15_RD2 ((unsigned int) AT91C_PIO_PB15) // SSC Receive Data 2 -#define AT91C_PB15_ERX2 ((unsigned int) AT91C_PIO_PB15) // Ethernet MAC Receive Data 2 -#define AT91C_PIO_PB16 ((unsigned int) 1 << 16) // Pin Controlled by PB16 -#define AT91C_PB16_RK2 ((unsigned int) AT91C_PIO_PB16) // SSC Receive Clock 2 -#define AT91C_PB16_ERX3 ((unsigned int) AT91C_PIO_PB16) // Ethernet MAC Receive Data 3 -#define AT91C_PIO_PB17 ((unsigned int) 1 << 17) // Pin Controlled by PB17 -#define AT91C_PB17_RF2 ((unsigned int) AT91C_PIO_PB17) // SSC Receive Frame Sync 2 -#define AT91C_PB17_ERXDV ((unsigned int) AT91C_PIO_PB17) // Ethernet MAC Receive Data Valid -#define AT91C_PIO_PB18 ((unsigned int) 1 << 18) // Pin Controlled by PB18 -#define AT91C_PB18_RI1 ((unsigned int) AT91C_PIO_PB18) // USART 1 Ring Indicator -#define AT91C_PB18_ECOL ((unsigned int) AT91C_PIO_PB18) // Ethernet MAC Collision Detected -#define AT91C_PIO_PB19 ((unsigned int) 1 << 19) // Pin Controlled by PB19 -#define AT91C_PB19_DTR1 ((unsigned int) AT91C_PIO_PB19) // USART 1 Data Terminal ready -#define AT91C_PB19_ERXCK ((unsigned int) AT91C_PIO_PB19) // Ethernet MAC Receive Clock -#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) // Pin Controlled by PB2 -#define AT91C_PB2_TD0 ((unsigned int) AT91C_PIO_PB2) // SSC Transmit data -#define AT91C_PB2_SCK3 ((unsigned int) AT91C_PIO_PB2) // USART 3 Serial Clock -#define AT91C_PIO_PB20 ((unsigned int) 1 << 20) // Pin Controlled by PB20 -#define AT91C_PB20_TXD1 ((unsigned int) AT91C_PIO_PB20) // USART 1 Transmit Data -#define AT91C_PIO_PB21 ((unsigned int) 1 << 21) // Pin Controlled by PB21 -#define AT91C_PB21_RXD1 ((unsigned int) AT91C_PIO_PB21) // USART 1 Receive Data -#define AT91C_PIO_PB22 ((unsigned int) 1 << 22) // Pin Controlled by PB22 -#define AT91C_PB22_SCK1 ((unsigned int) AT91C_PIO_PB22) // USART1 Serial Clock -#define AT91C_PIO_PB23 ((unsigned int) 1 << 23) // Pin Controlled by PB23 -#define AT91C_PB23_DCD1 ((unsigned int) AT91C_PIO_PB23) // USART 1 Data Carrier Detect -#define AT91C_PIO_PB24 ((unsigned int) 1 << 24) // Pin Controlled by PB24 -#define AT91C_PB24_CTS1 ((unsigned int) AT91C_PIO_PB24) // USART 1 Clear To Send -#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) // Pin Controlled by PB25 -#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) // USART 1 Data Set ready -#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) // Ethernet MAC Force 100 Mbits/sec -#define AT91C_PIO_PB26 ((unsigned int) 1 << 26) // Pin Controlled by PB26 -#define AT91C_PB26_RTS1 ((unsigned int) AT91C_PIO_PB26) // Usart 0 Ready To Send -#define AT91C_PIO_PB27 ((unsigned int) 1 << 27) // Pin Controlled by PB27 -#define AT91C_PB27_PCK0 ((unsigned int) AT91C_PIO_PB27) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PB28 ((unsigned int) 1 << 28) // Pin Controlled by PB28 -#define AT91C_PB28_FIQ ((unsigned int) AT91C_PIO_PB28) // AIC Fast Interrupt Input -#define AT91C_PIO_PB29 ((unsigned int) 1 << 29) // Pin Controlled by PB29 -#define AT91C_PB29_IRQ0 ((unsigned int) AT91C_PIO_PB29) // Interrupt input 0 -#define AT91C_PIO_PB3 ((unsigned int) 1 << 3) // Pin Controlled by PB3 -#define AT91C_PB3_RD0 ((unsigned int) AT91C_PIO_PB3) // SSC Receive Data -#define AT91C_PB3_MCDA1 ((unsigned int) AT91C_PIO_PB3) // Multimedia Card A Data 1 -#define AT91C_PIO_PB4 ((unsigned int) 1 << 4) // Pin Controlled by PB4 -#define AT91C_PB4_RK0 ((unsigned int) AT91C_PIO_PB4) // SSC Receive Clock -#define AT91C_PB4_MCDA2 ((unsigned int) AT91C_PIO_PB4) // Multimedia Card A Data 2 -#define AT91C_PIO_PB5 ((unsigned int) 1 << 5) // Pin Controlled by PB5 -#define AT91C_PB5_RF0 ((unsigned int) AT91C_PIO_PB5) // SSC Receive Frame Sync 0 -#define AT91C_PB5_MCDA3 ((unsigned int) AT91C_PIO_PB5) // Multimedia Card A Data 3 -#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) // Pin Controlled by PB6 -#define AT91C_PB6_TF1 ((unsigned int) AT91C_PIO_PB6) // SSC Transmit Frame Sync 1 -#define AT91C_PB6_TIOA3 ((unsigned int) AT91C_PIO_PB6) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) // Pin Controlled by PB7 -#define AT91C_PB7_TK1 ((unsigned int) AT91C_PIO_PB7) // SSC Transmit Clock 1 -#define AT91C_PB7_TIOB3 ((unsigned int) AT91C_PIO_PB7) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB8 ((unsigned int) 1 << 8) // Pin Controlled by PB8 -#define AT91C_PB8_TD1 ((unsigned int) AT91C_PIO_PB8) // SSC Transmit Data 1 -#define AT91C_PB8_TIOA4 ((unsigned int) AT91C_PIO_PB8) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB9 ((unsigned int) 1 << 9) // Pin Controlled by PB9 -#define AT91C_PB9_RD1 ((unsigned int) AT91C_PIO_PB9) // SSC Receive Data 1 -#define AT91C_PB9_TIOB4 ((unsigned int) AT91C_PIO_PB9) // Timer Counter 4 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PC0 ((unsigned int) 1 << 0) // Pin Controlled by PC0 -#define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) // Burst Flash Clock -#define AT91C_PIO_PC1 ((unsigned int) 1 << 1) // Pin Controlled by PC1 -#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) // Burst Flash Ready -#define AT91C_PIO_PC10 ((unsigned int) 1 << 10) // Pin Controlled by PC10 -#define AT91C_PC10_NCS4_CFCS ((unsigned int) AT91C_PIO_PC10) // Compact Flash Chip Select -#define AT91C_PIO_PC11 ((unsigned int) 1 << 11) // Pin Controlled by PC11 -#define AT91C_PC11_NCS5_CFCE1 ((unsigned int) AT91C_PIO_PC11) // Chip Select 5 / Compact Flash Chip Enable 1 -#define AT91C_PIO_PC12 ((unsigned int) 1 << 12) // Pin Controlled by PC12 -#define AT91C_PC12_NCS6_CFCE2 ((unsigned int) AT91C_PIO_PC12) // Chip Select 6 / Compact Flash Chip Enable 2 -#define AT91C_PIO_PC13 ((unsigned int) 1 << 13) // Pin Controlled by PC13 -#define AT91C_PC13_NCS7 ((unsigned int) AT91C_PIO_PC13) // Chip Select 7 -#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) // Pin Controlled by PC14 -#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) // Pin Controlled by PC15 -#define AT91C_PIO_PC16 ((unsigned int) 1 << 16) // Pin Controlled by PC16 -#define AT91C_PC16_D16 ((unsigned int) AT91C_PIO_PC16) // Data Bus [16] -#define AT91C_PIO_PC17 ((unsigned int) 1 << 17) // Pin Controlled by PC17 -#define AT91C_PC17_D17 ((unsigned int) AT91C_PIO_PC17) // Data Bus [17] -#define AT91C_PIO_PC18 ((unsigned int) 1 << 18) // Pin Controlled by PC18 -#define AT91C_PC18_D18 ((unsigned int) AT91C_PIO_PC18) // Data Bus [18] -#define AT91C_PIO_PC19 ((unsigned int) 1 << 19) // Pin Controlled by PC19 -#define AT91C_PC19_D19 ((unsigned int) AT91C_PIO_PC19) // Data Bus [19] -#define AT91C_PIO_PC2 ((unsigned int) 1 << 2) // Pin Controlled by PC2 -#define AT91C_PC2_BFAVD ((unsigned int) AT91C_PIO_PC2) // Burst Flash Address Valid -#define AT91C_PIO_PC20 ((unsigned int) 1 << 20) // Pin Controlled by PC20 -#define AT91C_PC20_D20 ((unsigned int) AT91C_PIO_PC20) // Data Bus [20] -#define AT91C_PIO_PC21 ((unsigned int) 1 << 21) // Pin Controlled by PC21 -#define AT91C_PC21_D21 ((unsigned int) AT91C_PIO_PC21) // Data Bus [21] -#define AT91C_PIO_PC22 ((unsigned int) 1 << 22) // Pin Controlled by PC22 -#define AT91C_PC22_D22 ((unsigned int) AT91C_PIO_PC22) // Data Bus [22] -#define AT91C_PIO_PC23 ((unsigned int) 1 << 23) // Pin Controlled by PC23 -#define AT91C_PC23_D23 ((unsigned int) AT91C_PIO_PC23) // Data Bus [23] -#define AT91C_PIO_PC24 ((unsigned int) 1 << 24) // Pin Controlled by PC24 -#define AT91C_PC24_D24 ((unsigned int) AT91C_PIO_PC24) // Data Bus [24] -#define AT91C_PIO_PC25 ((unsigned int) 1 << 25) // Pin Controlled by PC25 -#define AT91C_PC25_D25 ((unsigned int) AT91C_PIO_PC25) // Data Bus [25] -#define AT91C_PIO_PC26 ((unsigned int) 1 << 26) // Pin Controlled by PC26 -#define AT91C_PC26_D26 ((unsigned int) AT91C_PIO_PC26) // Data Bus [26] -#define AT91C_PIO_PC27 ((unsigned int) 1 << 27) // Pin Controlled by PC27 -#define AT91C_PC27_D27 ((unsigned int) AT91C_PIO_PC27) // Data Bus [27] -#define AT91C_PIO_PC28 ((unsigned int) 1 << 28) // Pin Controlled by PC28 -#define AT91C_PC28_D28 ((unsigned int) AT91C_PIO_PC28) // Data Bus [28] -#define AT91C_PIO_PC29 ((unsigned int) 1 << 29) // Pin Controlled by PC29 -#define AT91C_PC29_D29 ((unsigned int) AT91C_PIO_PC29) // Data Bus [29] -#define AT91C_PIO_PC3 ((unsigned int) 1 << 3) // Pin Controlled by PC3 -#define AT91C_PC3_BFBAA_SMWE ((unsigned int) AT91C_PIO_PC3) // Burst Flash Address Advance / SmartMedia Write Enable -#define AT91C_PIO_PC30 ((unsigned int) 1 << 30) // Pin Controlled by PC30 -#define AT91C_PC30_D30 ((unsigned int) AT91C_PIO_PC30) // Data Bus [30] -#define AT91C_PIO_PC31 ((unsigned int) 1 << 31) // Pin Controlled by PC31 -#define AT91C_PC31_D31 ((unsigned int) AT91C_PIO_PC31) // Data Bus [31] -#define AT91C_PIO_PC4 ((unsigned int) 1 << 4) // Pin Controlled by PC4 -#define AT91C_PC4_BFOE ((unsigned int) AT91C_PIO_PC4) // Burst Flash Output Enable -#define AT91C_PIO_PC5 ((unsigned int) 1 << 5) // Pin Controlled by PC5 -#define AT91C_PC5_BFWE ((unsigned int) AT91C_PIO_PC5) // Burst Flash Write Enable -#define AT91C_PIO_PC6 ((unsigned int) 1 << 6) // Pin Controlled by PC6 -#define AT91C_PC6_NWAIT ((unsigned int) AT91C_PIO_PC6) // NWAIT -#define AT91C_PIO_PC7 ((unsigned int) 1 << 7) // Pin Controlled by PC7 -#define AT91C_PC7_A23 ((unsigned int) AT91C_PIO_PC7) // Address Bus[23] -#define AT91C_PIO_PC8 ((unsigned int) 1 << 8) // Pin Controlled by PC8 -#define AT91C_PC8_A24 ((unsigned int) AT91C_PIO_PC8) // Address Bus[24] -#define AT91C_PIO_PC9 ((unsigned int) 1 << 9) // Pin Controlled by PC9 -#define AT91C_PC9_A25_CFRNW ((unsigned int) AT91C_PIO_PC9) // Address Bus[25] / Compact Flash Read Not Write -#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) // Pin Controlled by PD0 -#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) // Ethernet MAC Transmit Data 0 -#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) // Pin Controlled by PD1 -#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) // Ethernet MAC Transmit Data 1 -#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) // Pin Controlled by PD10 -#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) // PMC Programmable Clock Output 3 -#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) // ETM ARM9 pipeline status 1 -#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) // Pin Controlled by PD11 -#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) // -#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) // ETM ARM9 pipeline status 2 -#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) // Pin Controlled by PD12 -#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) // -#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) // ETM Trace Packet 0 -#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) // Pin Controlled by PD13 -#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) // -#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) // ETM Trace Packet 1 -#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) // Pin Controlled by PD14 -#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) // -#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) // ETM Trace Packet 2 -#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) // Pin Controlled by PD15 -#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) // SSC Transmit data -#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) // ETM Trace Packet 3 -#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) // Pin Controlled by PD16 -#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) // SSC Transmit Data 1 -#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) // ETM Trace Packet 4 -#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) // Pin Controlled by PD17 -#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) // SSC Transmit Data 2 -#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) // ETM Trace Packet 5 -#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) // Pin Controlled by PD18 -#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) // SPI Peripheral Chip Select 1 -#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) // ETM Trace Packet 6 -#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) // Pin Controlled by PD19 -#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) // SPI Peripheral Chip Select 2 -#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) // ETM Trace Packet 7 -#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) // Pin Controlled by PD2 -#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) // Pin Controlled by PD20 -#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) // SPI Peripheral Chip Select 3 -#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) // ETM Trace Packet 8 -#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) // Pin Controlled by PD21 -#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) // Usart 0 Ready To Send -#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) // ETM Trace Packet 9 -#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) // Pin Controlled by PD22 -#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) // Usart 0 Ready To Send -#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) // ETM Trace Packet 10 -#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) // Pin Controlled by PD23 -#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) // USART 2 Ready To Send -#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) // ETM Trace Packet 11 -#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) // Pin Controlled by PD24 -#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) // USART 3 Ready To Send -#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) // ETM Trace Packet 12 -#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) // Pin Controlled by PD25 -#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) // USART 1 Data Terminal ready -#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) // ETM Trace Packet 13 -#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) // Pin Controlled by PD26 -#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) // ETM Trace Packet 14 -#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) // Pin Controlled by PD27 -#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) // ETM Trace Packet 15 -#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) // Pin Controlled by PD3 -#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) // Pin Controlled by PD4 -#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) // Ethernet MAC Transmit Enable -#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) // Pin Controlled by PD5 -#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) // Pin Controlled by PD6 -#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) // DBGU Debug Transmit Data -#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) // Pin Controlled by PD7 -#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) // PMC Programmable Clock Output 0 -#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) // ETM Synchronization signal -#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) // Pin Controlled by PD8 -#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) // PMC Programmable Clock Output 1 -#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) // ETM Trace Clock signal -#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) // Pin Controlled by PD9 -#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) // PMC Programmable Clock 2 -#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) // ETM ARM9 pipeline status 0 - -// ***************************************************************************** -// PERIPHERAL ID DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ID_FIQ ((unsigned int) 0) // Advanced Interrupt Controller (FIQ) -#define AT91C_ID_SYS ((unsigned int) 1) // System Peripheral -#define AT91C_ID_PIOA ((unsigned int) 2) // Parallel IO Controller A -#define AT91C_ID_PIOB ((unsigned int) 3) // Parallel IO Controller B -#define AT91C_ID_PIOC ((unsigned int) 4) // Parallel IO Controller C -#define AT91C_ID_PIOD ((unsigned int) 5) // Parallel IO Controller D -#define AT91C_ID_US0 ((unsigned int) 6) // USART 0 -#define AT91C_ID_US1 ((unsigned int) 7) // USART 1 -#define AT91C_ID_US2 ((unsigned int) 8) // USART 2 -#define AT91C_ID_US3 ((unsigned int) 9) // USART 3 -#define AT91C_ID_MCI ((unsigned int) 10) // Multimedia Card Interface -#define AT91C_ID_UDP ((unsigned int) 11) // USB Device Port -#define AT91C_ID_TWI ((unsigned int) 12) // Two-Wire Interface -#define AT91C_ID_SPI ((unsigned int) 13) // Serial Peripheral Interface -#define AT91C_ID_SSC0 ((unsigned int) 14) // Serial Synchronous Controller 0 -#define AT91C_ID_SSC1 ((unsigned int) 15) // Serial Synchronous Controller 1 -#define AT91C_ID_SSC2 ((unsigned int) 16) // Serial Synchronous Controller 2 -#define AT91C_ID_TC0 ((unsigned int) 17) // Timer Counter 0 -#define AT91C_ID_TC1 ((unsigned int) 18) // Timer Counter 1 -#define AT91C_ID_TC2 ((unsigned int) 19) // Timer Counter 2 -#define AT91C_ID_TC3 ((unsigned int) 20) // Timer Counter 3 -#define AT91C_ID_TC4 ((unsigned int) 21) // Timer Counter 4 -#define AT91C_ID_TC5 ((unsigned int) 22) // Timer Counter 5 -#define AT91C_ID_UHP ((unsigned int) 23) // USB Host port -#define AT91C_ID_EMAC ((unsigned int) 24) // Ethernet MAC -#define AT91C_ID_IRQ0 ((unsigned int) 25) // Advanced Interrupt Controller (IRQ0) -#define AT91C_ID_IRQ1 ((unsigned int) 26) // Advanced Interrupt Controller (IRQ1) -#define AT91C_ID_IRQ2 ((unsigned int) 27) // Advanced Interrupt Controller (IRQ2) -#define AT91C_ID_IRQ3 ((unsigned int) 28) // Advanced Interrupt Controller (IRQ3) -#define AT91C_ID_IRQ4 ((unsigned int) 29) // Advanced Interrupt Controller (IRQ4) -#define AT91C_ID_IRQ5 ((unsigned int) 30) // Advanced Interrupt Controller (IRQ5) -#define AT91C_ID_IRQ6 ((unsigned int) 31) // Advanced Interrupt Controller (IRQ6) - -// ***************************************************************************** -// BASE ADDRESS DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_BASE_SYS ((AT91PS_SYS) 0xFFFFF000) // (SYS) Base Address -#define AT91C_BASE_MC ((AT91PS_MC) 0xFFFFFF00) // (MC) Base Address -#define AT91C_BASE_RTC ((AT91PS_RTC) 0xFFFFFE00) // (RTC) Base Address -#define AT91C_BASE_ST ((AT91PS_ST) 0xFFFFFD00) // (ST) Base Address -#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) // (PMC) Base Address -#define AT91C_BASE_CKGR ((AT91PS_CKGR) 0xFFFFFC20) // (CKGR) Base Address -#define AT91C_BASE_PIOD ((AT91PS_PIO) 0xFFFFFA00) // (PIOD) Base Address -#define AT91C_BASE_PIOC ((AT91PS_PIO) 0xFFFFF800) // (PIOC) Base Address -#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) // (PIOB) Base Address -#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) // (PIOA) Base Address -#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) // (DBGU) Base Address -#define AT91C_BASE_PDC_DBGU ((AT91PS_PDC) 0xFFFFF300) // (PDC_DBGU) Base Address -#define AT91C_BASE_AIC ((AT91PS_AIC) 0xFFFFF000) // (AIC) Base Address -#define AT91C_BASE_PDC_SPI ((AT91PS_PDC) 0xFFFE0100) // (PDC_SPI) Base Address -#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) // (SPI) Base Address -#define AT91C_BASE_PDC_SSC2 ((AT91PS_PDC) 0xFFFD8100) // (PDC_SSC2) Base Address -#define AT91C_BASE_SSC2 ((AT91PS_SSC) 0xFFFD8000) // (SSC2) Base Address -#define AT91C_BASE_PDC_SSC1 ((AT91PS_PDC) 0xFFFD4100) // (PDC_SSC1) Base Address -#define AT91C_BASE_SSC1 ((AT91PS_SSC) 0xFFFD4000) // (SSC1) Base Address -#define AT91C_BASE_PDC_SSC0 ((AT91PS_PDC) 0xFFFD0100) // (PDC_SSC0) Base Address -#define AT91C_BASE_SSC0 ((AT91PS_SSC) 0xFFFD0000) // (SSC0) Base Address -#define AT91C_BASE_PDC_US3 ((AT91PS_PDC) 0xFFFCC100) // (PDC_US3) Base Address -#define AT91C_BASE_US3 ((AT91PS_USART) 0xFFFCC000) // (US3) Base Address -#define AT91C_BASE_PDC_US2 ((AT91PS_PDC) 0xFFFC8100) // (PDC_US2) Base Address -#define AT91C_BASE_US2 ((AT91PS_USART) 0xFFFC8000) // (US2) Base Address -#define AT91C_BASE_PDC_US1 ((AT91PS_PDC) 0xFFFC4100) // (PDC_US1) Base Address -#define AT91C_BASE_US1 ((AT91PS_USART) 0xFFFC4000) // (US1) Base Address -#define AT91C_BASE_PDC_US0 ((AT91PS_PDC) 0xFFFC0100) // (PDC_US0) Base Address -#define AT91C_BASE_US0 ((AT91PS_USART) 0xFFFC0000) // (US0) Base Address -#define AT91C_BASE_TWI ((AT91PS_TWI) 0xFFFB8000) // (TWI) Base Address -#define AT91C_BASE_PDC_MCI ((AT91PS_PDC) 0xFFFB4100) // (PDC_MCI) Base Address -#define AT91C_BASE_MCI ((AT91PS_MCI) 0xFFFB4000) // (MCI) Base Address -#define AT91C_BASE_UDP ((AT91PS_UDP) 0xFFFB0000) // (UDP) Base Address -#define AT91C_BASE_TC5 ((AT91PS_TC) 0xFFFA4080) // (TC5) Base Address -#define AT91C_BASE_TC4 ((AT91PS_TC) 0xFFFA4040) // (TC4) Base Address -#define AT91C_BASE_TC3 ((AT91PS_TC) 0xFFFA4000) // (TC3) Base Address -#define AT91C_BASE_TCB1 ((AT91PS_TCB) 0xFFFA4080) // (TCB1) Base Address -#define AT91C_BASE_TC2 ((AT91PS_TC) 0xFFFA0080) // (TC2) Base Address -#define AT91C_BASE_TC1 ((AT91PS_TC) 0xFFFA0040) // (TC1) Base Address -#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) // (TC0) Base Address -#define AT91C_BASE_TCB0 ((AT91PS_TCB) 0xFFFA0000) // (TCB0) Base Address -#define AT91C_BASE_UHP ((AT91PS_UHP) 0x00300000) // (UHP) Base Address -#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) // (EMAC) Base Address -#define AT91C_BASE_EBI ((AT91PS_EBI) 0xFFFFFF60) // (EBI) Base Address -#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) // (SMC2) Base Address -#define AT91C_BASE_SDRC ((AT91PS_SDRC) 0xFFFFFF90) // (SDRC) Base Address -#define AT91C_BASE_BFC ((AT91PS_BFC) 0xFFFFFFC0) // (BFC) Base Address - -// ***************************************************************************** -// MEMORY MAPPING DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ISRAM ((char *) 0x00200000) // Internal SRAM base address -#define AT91C_ISRAM_SIZE ((unsigned int) 0x00004000) // Internal SRAM size in byte (16 Kbyte) -#define AT91C_IROM ((char *) 0x00100000) // Internal ROM base address -#define AT91C_IROM_SIZE ((unsigned int) 0x00020000) // Internal ROM size in byte (128 Kbyte) - -#endif diff --git a/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.inc b/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.inc deleted file mode 100644 index 670e023fb5..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200.inc +++ /dev/null @@ -1,2437 +0,0 @@ -;- ---------------------------------------------------------------------------- -;- ATMEL Microcontroller Software Support - ROUSSET - -;- ---------------------------------------------------------------------------- -;- The software is delivered "AS IS" without warranty or condition of any -;- kind, either express, implied or statutory. This includes without -;- limitation any warranty or condition with respect to merchantability or -;- fitness for any particular purpose, or against the infringements of -;- intellectual property rights of others. -;- ---------------------------------------------------------------------------- -;- File Name : AT91RM9200.h -;- Object : AT91RM9200 definitions -;- Generated : AT91 SW Application Group 11/19/2003 (17:20:51) -;- -;- CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// -;- CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// -;- CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// -;- CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -;- CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// -;- CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// -;- CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// -;- CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -;- CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// -;- CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// -;- CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// -;- CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// -;- CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// -;- CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// -;- CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// -;- CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// -;- CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// -;- CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// -;- CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// -;- CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// -;- CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// -;- CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// -;- CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// -;- ---------------------------------------------------------------------------- - -;- Hardware register definition - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR System Peripherals -;- ***************************************************************************** - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Memory Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_MC -MC_RCR # 4 ;- MC Remap Control Register -MC_ASR # 4 ;- MC Abort Status Register -MC_AASR # 4 ;- MC Abort Address Status Register - # 4 ;- Reserved -MC_PUIA # 64 ;- MC Protection Unit Area -MC_PUP # 4 ;- MC Protection Unit Peripherals -MC_PUER # 4 ;- MC Protection Unit Enable Register -;- -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- -AT91C_MC_RCB EQU (0x1:SHL:0) ;- (MC) Remap Command Bit -;- -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- -AT91C_MC_UNDADD EQU (0x1:SHL:0) ;- (MC) Undefined Addess Abort Status -AT91C_MC_MISADD EQU (0x1:SHL:1) ;- (MC) Misaligned Addess Abort Status -AT91C_MC_MPU EQU (0x1:SHL:2) ;- (MC) Memory protection Unit Abort Status -AT91C_MC_ABTSZ EQU (0x3:SHL:8) ;- (MC) Abort Size Status -AT91C_MC_ABTSZ_BYTE EQU (0x0:SHL:8) ;- (MC) Byte -AT91C_MC_ABTSZ_HWORD EQU (0x1:SHL:8) ;- (MC) Half-word -AT91C_MC_ABTSZ_WORD EQU (0x2:SHL:8) ;- (MC) Word -AT91C_MC_ABTTYP EQU (0x3:SHL:10) ;- (MC) Abort Type Status -AT91C_MC_ABTTYP_DATAR EQU (0x0:SHL:10) ;- (MC) Data Read -AT91C_MC_ABTTYP_DATAW EQU (0x1:SHL:10) ;- (MC) Data Write -AT91C_MC_ABTTYP_FETCH EQU (0x2:SHL:10) ;- (MC) Code Fetch -AT91C_MC_MST0 EQU (0x1:SHL:16) ;- (MC) Master 0 Abort Source -AT91C_MC_MST1 EQU (0x1:SHL:17) ;- (MC) Master 1 Abort Source -AT91C_MC_SVMST0 EQU (0x1:SHL:24) ;- (MC) Saved Master 0 Abort Source -AT91C_MC_SVMST1 EQU (0x1:SHL:25) ;- (MC) Saved Master 1 Abort Source -;- -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- -AT91C_MC_PROT EQU (0x3:SHL:0) ;- (MC) Protection -AT91C_MC_PROT_PNAUNA EQU (0x0) ;- (MC) Privilege: No Access, User: No Access -AT91C_MC_PROT_PRWUNA EQU (0x1) ;- (MC) Privilege: Read/Write, User: No Access -AT91C_MC_PROT_PRWURO EQU (0x2) ;- (MC) Privilege: Read/Write, User: Read Only -AT91C_MC_PROT_PRWURW EQU (0x3) ;- (MC) Privilege: Read/Write, User: Read/Write -AT91C_MC_SIZE EQU (0xF:SHL:4) ;- (MC) Internal Area Size -AT91C_MC_SIZE_1KB EQU (0x0:SHL:4) ;- (MC) Area size 1KByte -AT91C_MC_SIZE_2KB EQU (0x1:SHL:4) ;- (MC) Area size 2KByte -AT91C_MC_SIZE_4KB EQU (0x2:SHL:4) ;- (MC) Area size 4KByte -AT91C_MC_SIZE_8KB EQU (0x3:SHL:4) ;- (MC) Area size 8KByte -AT91C_MC_SIZE_16KB EQU (0x4:SHL:4) ;- (MC) Area size 16KByte -AT91C_MC_SIZE_32KB EQU (0x5:SHL:4) ;- (MC) Area size 32KByte -AT91C_MC_SIZE_64KB EQU (0x6:SHL:4) ;- (MC) Area size 64KByte -AT91C_MC_SIZE_128KB EQU (0x7:SHL:4) ;- (MC) Area size 128KByte -AT91C_MC_SIZE_256KB EQU (0x8:SHL:4) ;- (MC) Area size 256KByte -AT91C_MC_SIZE_512KB EQU (0x9:SHL:4) ;- (MC) Area size 512KByte -AT91C_MC_SIZE_1MB EQU (0xA:SHL:4) ;- (MC) Area size 1MByte -AT91C_MC_SIZE_2MB EQU (0xB:SHL:4) ;- (MC) Area size 2MByte -AT91C_MC_SIZE_4MB EQU (0xC:SHL:4) ;- (MC) Area size 4MByte -AT91C_MC_SIZE_8MB EQU (0xD:SHL:4) ;- (MC) Area size 8MByte -AT91C_MC_SIZE_16MB EQU (0xE:SHL:4) ;- (MC) Area size 16MByte -AT91C_MC_SIZE_64MB EQU (0xF:SHL:4) ;- (MC) Area size 64MByte -AT91C_MC_BA EQU (0x3FFFF:SHL:10) ;- (MC) Internal Area Base Address -;- -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- -;- -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- -AT91C_MC_PUEB EQU (0x1:SHL:0) ;- (MC) Protection Unit enable Bit - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_RTC -RTC_CR # 4 ;- Control Register -RTC_MR # 4 ;- Mode Register -RTC_TIMR # 4 ;- Time Register -RTC_CALR # 4 ;- Calendar Register -RTC_TIMALR # 4 ;- Time Alarm Register -RTC_CALALR # 4 ;- Calendar Alarm Register -RTC_SR # 4 ;- Status Register -RTC_SCCR # 4 ;- Status Clear Command Register -RTC_IER # 4 ;- Interrupt Enable Register -RTC_IDR # 4 ;- Interrupt Disable Register -RTC_IMR # 4 ;- Interrupt Mask Register -RTC_VER # 4 ;- Valid Entry Register -;- -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- -AT91C_RTC_UPDTIM EQU (0x1:SHL:0) ;- (RTC) Update Request Time Register -AT91C_RTC_UPDCAL EQU (0x1:SHL:1) ;- (RTC) Update Request Calendar Register -AT91C_RTC_TIMEVSEL EQU (0x3:SHL:8) ;- (RTC) Time Event Selection -AT91C_RTC_TIMEVSEL_MINUTE EQU (0x0:SHL:8) ;- (RTC) Minute change. -AT91C_RTC_TIMEVSEL_HOUR EQU (0x1:SHL:8) ;- (RTC) Hour change. -AT91C_RTC_TIMEVSEL_DAY24 EQU (0x2:SHL:8) ;- (RTC) Every day at midnight. -AT91C_RTC_TIMEVSEL_DAY12 EQU (0x3:SHL:8) ;- (RTC) Every day at noon. -AT91C_RTC_CALEVSEL EQU (0x3:SHL:16) ;- (RTC) Calendar Event Selection -AT91C_RTC_CALEVSEL_WEEK EQU (0x0:SHL:16) ;- (RTC) Week change (every Monday at time 00:00:00). -AT91C_RTC_CALEVSEL_MONTH EQU (0x1:SHL:16) ;- (RTC) Month change (every 01 of each month at time 00:00:00). -AT91C_RTC_CALEVSEL_YEAR EQU (0x2:SHL:16) ;- (RTC) Year change (every January 1 at time 00:00:00). -;- -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- -AT91C_RTC_HRMOD EQU (0x1:SHL:0) ;- (RTC) 12-24 hour Mode -;- -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- -AT91C_RTC_SEC EQU (0x7F:SHL:0) ;- (RTC) Current Second -AT91C_RTC_MIN EQU (0x7F:SHL:8) ;- (RTC) Current Minute -AT91C_RTC_HOUR EQU (0x1F:SHL:16) ;- (RTC) Current Hour -AT91C_RTC_AMPM EQU (0x1:SHL:22) ;- (RTC) Ante Meridiem, Post Meridiem Indicator -;- -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- -AT91C_RTC_CENT EQU (0x3F:SHL:0) ;- (RTC) Current Century -AT91C_RTC_YEAR EQU (0xFF:SHL:8) ;- (RTC) Current Year -AT91C_RTC_MONTH EQU (0x1F:SHL:16) ;- (RTC) Current Month -AT91C_RTC_DAY EQU (0x7:SHL:21) ;- (RTC) Current Day -AT91C_RTC_DATE EQU (0x3F:SHL:24) ;- (RTC) Current Date -;- -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- -AT91C_RTC_SECEN EQU (0x1:SHL:7) ;- (RTC) Second Alarm Enable -AT91C_RTC_MINEN EQU (0x1:SHL:15) ;- (RTC) Minute Alarm -AT91C_RTC_HOUREN EQU (0x1:SHL:23) ;- (RTC) Current Hour -;- -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- -AT91C_RTC_MONTHEN EQU (0x1:SHL:23) ;- (RTC) Month Alarm Enable -AT91C_RTC_DATEEN EQU (0x1:SHL:31) ;- (RTC) Date Alarm Enable -;- -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- -AT91C_RTC_ACKUPD EQU (0x1:SHL:0) ;- (RTC) Acknowledge for Update -AT91C_RTC_ALARM EQU (0x1:SHL:1) ;- (RTC) Alarm Flag -AT91C_RTC_SECEV EQU (0x1:SHL:2) ;- (RTC) Second Event -AT91C_RTC_TIMEV EQU (0x1:SHL:3) ;- (RTC) Time Event -AT91C_RTC_CALEV EQU (0x1:SHL:4) ;- (RTC) Calendar event -;- -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- -;- -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- -;- -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- -;- -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- -;- -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- -AT91C_RTC_NVTIM EQU (0x1:SHL:0) ;- (RTC) Non valid Time -AT91C_RTC_NVCAL EQU (0x1:SHL:1) ;- (RTC) Non valid Calendar -AT91C_RTC_NVTIMALR EQU (0x1:SHL:2) ;- (RTC) Non valid time Alarm -AT91C_RTC_NVCALALR EQU (0x1:SHL:3) ;- (RTC) Nonvalid Calendar Alarm - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR System Timer Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_ST -ST_CR # 4 ;- Control Register -ST_PIMR # 4 ;- Period Interval Mode Register -ST_WDMR # 4 ;- Watchdog Mode Register -ST_RTMR # 4 ;- Real-time Mode Register -ST_SR # 4 ;- Status Register -ST_IER # 4 ;- Interrupt Enable Register -ST_IDR # 4 ;- Interrupt Disable Register -ST_IMR # 4 ;- Interrupt Mask Register -ST_RTAR # 4 ;- Real-time Alarm Register -ST_CRTR # 4 ;- Current Real-time Register -;- -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- -AT91C_ST_WDRST EQU (0x1:SHL:0) ;- (ST) Watchdog Timer Restart -;- -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- -AT91C_ST_PIV EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart -;- -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- -AT91C_ST_WDV EQU (0xFFFF:SHL:0) ;- (ST) Watchdog Timer Restart -AT91C_ST_RSTEN EQU (0x1:SHL:16) ;- (ST) Reset Enable -AT91C_ST_EXTEN EQU (0x1:SHL:17) ;- (ST) External Signal Assertion Enable -;- -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- -AT91C_ST_RTPRES EQU (0xFFFF:SHL:0) ;- (ST) Real-time Timer Prescaler Value -;- -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- -AT91C_ST_PITS EQU (0x1:SHL:0) ;- (ST) Period Interval Timer Interrupt -AT91C_ST_WDOVF EQU (0x1:SHL:1) ;- (ST) Watchdog Overflow -AT91C_ST_RTTINC EQU (0x1:SHL:2) ;- (ST) Real-time Timer Increment -AT91C_ST_ALMS EQU (0x1:SHL:3) ;- (ST) Alarm Status -;- -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- -;- -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- -;- -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- -;- -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- -AT91C_ST_ALMV EQU (0xFFFFF:SHL:0) ;- (ST) Alarm Value Value -;- -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- -AT91C_ST_CRTV EQU (0xFFFFF:SHL:0) ;- (ST) Current Real-time Value - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Power Management Controler -;- ***************************************************************************** - ^ 0 ;- AT91S_PMC -PMC_SCER # 4 ;- System Clock Enable Register -PMC_SCDR # 4 ;- System Clock Disable Register -PMC_SCSR # 4 ;- System Clock Status Register - # 4 ;- Reserved -PMC_PCER # 4 ;- Peripheral Clock Enable Register -PMC_PCDR # 4 ;- Peripheral Clock Disable Register -PMC_PCSR # 4 ;- Peripheral Clock Status Register - # 20 ;- Reserved -PMC_MCKR # 4 ;- Master Clock Register - # 12 ;- Reserved -PMC_PCKR # 32 ;- Programmable Clock Register -PMC_IER # 4 ;- Interrupt Enable Register -PMC_IDR # 4 ;- Interrupt Disable Register -PMC_SR # 4 ;- Status Register -PMC_IMR # 4 ;- Interrupt Mask Register -;- -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- -AT91C_PMC_PCK EQU (0x1:SHL:0) ;- (PMC) Processor Clock -AT91C_PMC_UDP EQU (0x1:SHL:1) ;- (PMC) USB Device Port Clock -AT91C_PMC_MCKUDP EQU (0x1:SHL:2) ;- (PMC) USB Device Port Master Clock Automatic Disable on Suspend -AT91C_PMC_UHP EQU (0x1:SHL:4) ;- (PMC) USB Host Port Clock -AT91C_PMC_PCK0 EQU (0x1:SHL:8) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK1 EQU (0x1:SHL:9) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK2 EQU (0x1:SHL:10) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK3 EQU (0x1:SHL:11) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK4 EQU (0x1:SHL:12) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK5 EQU (0x1:SHL:13) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK6 EQU (0x1:SHL:14) ;- (PMC) Programmable Clock Output -AT91C_PMC_PCK7 EQU (0x1:SHL:15) ;- (PMC) Programmable Clock Output -;- -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- -;- -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- -;- -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- -AT91C_PMC_CSS EQU (0x3:SHL:0) ;- (PMC) Programmable Clock Selection -AT91C_PMC_CSS_SLOW_CLK EQU (0x0) ;- (PMC) Slow Clock is selected -AT91C_PMC_CSS_MAIN_CLK EQU (0x1) ;- (PMC) Main Clock is selected -AT91C_PMC_CSS_PLLA_CLK EQU (0x2) ;- (PMC) Clock from PLL A is selected -AT91C_PMC_CSS_PLLB_CLK EQU (0x3) ;- (PMC) Clock from PLL B is selected -AT91C_PMC_PRES EQU (0x7:SHL:2) ;- (PMC) Programmable Clock Prescaler -AT91C_PMC_PRES_CLK EQU (0x0:SHL:2) ;- (PMC) Selected clock -AT91C_PMC_PRES_CLK_2 EQU (0x1:SHL:2) ;- (PMC) Selected clock divided by 2 -AT91C_PMC_PRES_CLK_4 EQU (0x2:SHL:2) ;- (PMC) Selected clock divided by 4 -AT91C_PMC_PRES_CLK_8 EQU (0x3:SHL:2) ;- (PMC) Selected clock divided by 8 -AT91C_PMC_PRES_CLK_16 EQU (0x4:SHL:2) ;- (PMC) Selected clock divided by 16 -AT91C_PMC_PRES_CLK_32 EQU (0x5:SHL:2) ;- (PMC) Selected clock divided by 32 -AT91C_PMC_PRES_CLK_64 EQU (0x6:SHL:2) ;- (PMC) Selected clock divided by 64 -AT91C_PMC_MDIV EQU (0x3:SHL:8) ;- (PMC) Master Clock Division -AT91C_PMC_MDIV_1 EQU (0x0:SHL:8) ;- (PMC) The master clock and the processor clock are the same -AT91C_PMC_MDIV_2 EQU (0x1:SHL:8) ;- (PMC) The processor clock is twice as fast as the master clock -AT91C_PMC_MDIV_3 EQU (0x2:SHL:8) ;- (PMC) The processor clock is three times faster than the master clock -AT91C_PMC_MDIV_4 EQU (0x3:SHL:8) ;- (PMC) The processor clock is four times faster than the master clock -;- -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- -;- -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- -AT91C_PMC_MOSCS EQU (0x1:SHL:0) ;- (PMC) MOSC Status/Enable/Disable/Mask -AT91C_PMC_LOCKA EQU (0x1:SHL:1) ;- (PMC) PLL A Status/Enable/Disable/Mask -AT91C_PMC_LOCKB EQU (0x1:SHL:2) ;- (PMC) PLL B Status/Enable/Disable/Mask -AT91C_PMC_MCKRDY EQU (0x1:SHL:3) ;- (PMC) MCK_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK0RDY EQU (0x1:SHL:8) ;- (PMC) PCK0_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK1RDY EQU (0x1:SHL:9) ;- (PMC) PCK1_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK2RDY EQU (0x1:SHL:10) ;- (PMC) PCK2_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK3RDY EQU (0x1:SHL:11) ;- (PMC) PCK3_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK4RDY EQU (0x1:SHL:12) ;- (PMC) PCK4_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK5RDY EQU (0x1:SHL:13) ;- (PMC) PCK5_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK6RDY EQU (0x1:SHL:14) ;- (PMC) PCK6_RDY Status/Enable/Disable/Mask -AT91C_PMC_PCK7RDY EQU (0x1:SHL:15) ;- (PMC) PCK7_RDY Status/Enable/Disable/Mask -;- -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- -;- -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- -;- -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Clock Generator Controler -;- ***************************************************************************** - ^ 0 ;- AT91S_CKGR -CKGR_MOR # 4 ;- Main Oscillator Register -CKGR_MCFR # 4 ;- Main Clock Frequency Register -CKGR_PLLAR # 4 ;- PLL A Register -CKGR_PLLBR # 4 ;- PLL B Register -;- -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- -AT91C_CKGR_MOSCEN EQU (0x1:SHL:0) ;- (CKGR) Main Oscillator Enable -AT91C_CKGR_OSCTEST EQU (0x1:SHL:1) ;- (CKGR) Oscillator Test -AT91C_CKGR_OSCOUNT EQU (0xFF:SHL:8) ;- (CKGR) Main Oscillator Start-up Time -;- -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- -AT91C_CKGR_MAINF EQU (0xFFFF:SHL:0) ;- (CKGR) Main Clock Frequency -AT91C_CKGR_MAINRDY EQU (0x1:SHL:16) ;- (CKGR) Main Clock Ready -;- -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- -AT91C_CKGR_DIVA EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected -AT91C_CKGR_DIVA_0 EQU (0x0) ;- (CKGR) Divider output is 0 -AT91C_CKGR_DIVA_BYPASS EQU (0x1) ;- (CKGR) Divider is bypassed -AT91C_CKGR_PLLACOUNT EQU (0x3F:SHL:8) ;- (CKGR) PLL A Counter -AT91C_CKGR_OUTA EQU (0x3:SHL:14) ;- (CKGR) PLL A Output Frequency Range -AT91C_CKGR_OUTA_0 EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_OUTA_1 EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_OUTA_2 EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_OUTA_3 EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLA datasheet -AT91C_CKGR_MULA EQU (0x7FF:SHL:16) ;- (CKGR) PLL A Multiplier -AT91C_CKGR_SRCA EQU (0x1:SHL:29) ;- (CKGR) PLL A Source -;- -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- -AT91C_CKGR_DIVB EQU (0xFF:SHL:0) ;- (CKGR) Divider Selected -AT91C_CKGR_DIVB_0 EQU (0x0) ;- (CKGR) Divider output is 0 -AT91C_CKGR_DIVB_BYPASS EQU (0x1) ;- (CKGR) Divider is bypassed -AT91C_CKGR_PLLBCOUNT EQU (0x3F:SHL:8) ;- (CKGR) PLL B Counter -AT91C_CKGR_OUTB EQU (0x3:SHL:14) ;- (CKGR) PLL B Output Frequency Range -AT91C_CKGR_OUTB_0 EQU (0x0:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_OUTB_1 EQU (0x1:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_OUTB_2 EQU (0x2:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_OUTB_3 EQU (0x3:SHL:14) ;- (CKGR) Please refer to the PLLB datasheet -AT91C_CKGR_MULB EQU (0x7FF:SHL:16) ;- (CKGR) PLL B Multiplier -AT91C_CKGR_USB_96M EQU (0x1:SHL:28) ;- (CKGR) Divider for USB Ports -AT91C_CKGR_USB_PLL EQU (0x1:SHL:29) ;- (CKGR) PLL Use - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Parallel Input Output Controler -;- ***************************************************************************** - ^ 0 ;- AT91S_PIO -PIO_PER # 4 ;- PIO Enable Register -PIO_PDR # 4 ;- PIO Disable Register -PIO_PSR # 4 ;- PIO Status Register - # 4 ;- Reserved -PIO_OER # 4 ;- Output Enable Register -PIO_ODR # 4 ;- Output Disable Registerr -PIO_OSR # 4 ;- Output Status Register - # 4 ;- Reserved -PIO_IFER # 4 ;- Input Filter Enable Register -PIO_IFDR # 4 ;- Input Filter Disable Register -PIO_IFSR # 4 ;- Input Filter Status Register - # 4 ;- Reserved -PIO_SODR # 4 ;- Set Output Data Register -PIO_CODR # 4 ;- Clear Output Data Register -PIO_ODSR # 4 ;- Output Data Status Register -PIO_PDSR # 4 ;- Pin Data Status Register -PIO_IER # 4 ;- Interrupt Enable Register -PIO_IDR # 4 ;- Interrupt Disable Register -PIO_IMR # 4 ;- Interrupt Mask Register -PIO_ISR # 4 ;- Interrupt Status Register -PIO_MDER # 4 ;- Multi-driver Enable Register -PIO_MDDR # 4 ;- Multi-driver Disable Register -PIO_MDSR # 4 ;- Multi-driver Status Register - # 4 ;- Reserved -PIO_PPUDR # 4 ;- Pull-up Disable Register -PIO_PPUER # 4 ;- Pull-up Enable Register -PIO_PPUSR # 4 ;- Pad Pull-up Status Register - # 4 ;- Reserved -PIO_ASR # 4 ;- Select A Register -PIO_BSR # 4 ;- Select B Register -PIO_ABSR # 4 ;- AB Select Status Register - # 36 ;- Reserved -PIO_OWER # 4 ;- Output Write Enable Register -PIO_OWDR # 4 ;- Output Write Disable Register -PIO_OWSR # 4 ;- Output Write Status Register - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Debug Unit -;- ***************************************************************************** - ^ 0 ;- AT91S_DBGU -DBGU_CR # 4 ;- Control Register -DBGU_MR # 4 ;- Mode Register -DBGU_IER # 4 ;- Interrupt Enable Register -DBGU_IDR # 4 ;- Interrupt Disable Register -DBGU_IMR # 4 ;- Interrupt Mask Register -DBGU_CSR # 4 ;- Channel Status Register -DBGU_RHR # 4 ;- Receiver Holding Register -DBGU_THR # 4 ;- Transmitter Holding Register -DBGU_BRGR # 4 ;- Baud Rate Generator Register - # 28 ;- Reserved -DBGU_C1R # 4 ;- Chip ID1 Register -DBGU_C2R # 4 ;- Chip ID2 Register -DBGU_FNTR # 4 ;- Force NTRST Register - # 180 ;- Reserved -DBGU_RPR # 4 ;- Receive Pointer Register -DBGU_RCR # 4 ;- Receive Counter Register -DBGU_TPR # 4 ;- Transmit Pointer Register -DBGU_TCR # 4 ;- Transmit Counter Register -DBGU_RNPR # 4 ;- Receive Next Pointer Register -DBGU_RNCR # 4 ;- Receive Next Counter Register -DBGU_TNPR # 4 ;- Transmit Next Pointer Register -DBGU_TNCR # 4 ;- Transmit Next Counter Register -DBGU_PTCR # 4 ;- PDC Transfer Control Register -DBGU_PTSR # 4 ;- PDC Transfer Status Register -;- -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- -AT91C_US_RSTRX EQU (0x1:SHL:2) ;- (DBGU) Reset Receiver -AT91C_US_RSTTX EQU (0x1:SHL:3) ;- (DBGU) Reset Transmitter -AT91C_US_RXEN EQU (0x1:SHL:4) ;- (DBGU) Receiver Enable -AT91C_US_RXDIS EQU (0x1:SHL:5) ;- (DBGU) Receiver Disable -AT91C_US_TXEN EQU (0x1:SHL:6) ;- (DBGU) Transmitter Enable -AT91C_US_TXDIS EQU (0x1:SHL:7) ;- (DBGU) Transmitter Disable -;- -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- -AT91C_US_PAR EQU (0x7:SHL:9) ;- (DBGU) Parity type -AT91C_US_PAR_EVEN EQU (0x0:SHL:9) ;- (DBGU) Even Parity -AT91C_US_PAR_ODD EQU (0x1:SHL:9) ;- (DBGU) Odd Parity -AT91C_US_PAR_SPACE EQU (0x2:SHL:9) ;- (DBGU) Parity forced to 0 (Space) -AT91C_US_PAR_MARK EQU (0x3:SHL:9) ;- (DBGU) Parity forced to 1 (Mark) -AT91C_US_PAR_NONE EQU (0x4:SHL:9) ;- (DBGU) No Parity -AT91C_US_PAR_MULTI_DROP EQU (0x6:SHL:9) ;- (DBGU) Multi-drop mode -AT91C_US_CHMODE EQU (0x3:SHL:14) ;- (DBGU) Channel Mode -AT91C_US_CHMODE_NORMAL EQU (0x0:SHL:14) ;- (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. -AT91C_US_CHMODE_AUTO EQU (0x1:SHL:14) ;- (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. -AT91C_US_CHMODE_LOCAL EQU (0x2:SHL:14) ;- (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. -AT91C_US_CHMODE_REMOTE EQU (0x3:SHL:14) ;- (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. -;- -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- -AT91C_US_RXRDY EQU (0x1:SHL:0) ;- (DBGU) RXRDY Interrupt -AT91C_US_TXRDY EQU (0x1:SHL:1) ;- (DBGU) TXRDY Interrupt -AT91C_US_ENDRX EQU (0x1:SHL:3) ;- (DBGU) End of Receive Transfer Interrupt -AT91C_US_ENDTX EQU (0x1:SHL:4) ;- (DBGU) End of Transmit Interrupt -AT91C_US_OVRE EQU (0x1:SHL:5) ;- (DBGU) Overrun Interrupt -AT91C_US_FRAME EQU (0x1:SHL:6) ;- (DBGU) Framing Error Interrupt -AT91C_US_PARE EQU (0x1:SHL:7) ;- (DBGU) Parity Error Interrupt -AT91C_US_TXEMPTY EQU (0x1:SHL:9) ;- (DBGU) TXEMPTY Interrupt -AT91C_US_TXBUFE EQU (0x1:SHL:11) ;- (DBGU) TXBUFE Interrupt -AT91C_US_RXBUFF EQU (0x1:SHL:12) ;- (DBGU) RXBUFF Interrupt -AT91C_US_COMM_TX EQU (0x1:SHL:30) ;- (DBGU) COMM_TX Interrupt -AT91C_US_COMM_RX EQU (0x1:SHL:31) ;- (DBGU) COMM_RX Interrupt -;- -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- -;- -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- -;- -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- -;- -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- -AT91C_US_FORCE_NTRST EQU (0x1:SHL:0) ;- (DBGU) Force NTRST in JTAG - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Peripheral Data Controller -;- ***************************************************************************** - ^ 0 ;- AT91S_PDC -PDC_RPR # 4 ;- Receive Pointer Register -PDC_RCR # 4 ;- Receive Counter Register -PDC_TPR # 4 ;- Transmit Pointer Register -PDC_TCR # 4 ;- Transmit Counter Register -PDC_RNPR # 4 ;- Receive Next Pointer Register -PDC_RNCR # 4 ;- Receive Next Counter Register -PDC_TNPR # 4 ;- Transmit Next Pointer Register -PDC_TNCR # 4 ;- Transmit Next Counter Register -PDC_PTCR # 4 ;- PDC Transfer Control Register -PDC_PTSR # 4 ;- PDC Transfer Status Register -;- -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- -AT91C_PDC_RXTEN EQU (0x1:SHL:0) ;- (PDC) Receiver Transfer Enable -AT91C_PDC_RXTDIS EQU (0x1:SHL:1) ;- (PDC) Receiver Transfer Disable -AT91C_PDC_TXTEN EQU (0x1:SHL:8) ;- (PDC) Transmitter Transfer Enable -AT91C_PDC_TXTDIS EQU (0x1:SHL:9) ;- (PDC) Transmitter Transfer Disable -;- -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Advanced Interrupt Controller -;- ***************************************************************************** - ^ 0 ;- AT91S_AIC -AIC_SMR # 128 ;- Source Mode Register -AIC_SVR # 128 ;- Source Vector Register -AIC_IVR # 4 ;- IRQ Vector Register -AIC_FVR # 4 ;- FIQ Vector Register -AIC_ISR # 4 ;- Interrupt Status Register -AIC_IPR # 4 ;- Interrupt Pending Register -AIC_IMR # 4 ;- Interrupt Mask Register -AIC_CISR # 4 ;- Core Interrupt Status Register - # 8 ;- Reserved -AIC_IECR # 4 ;- Interrupt Enable Command Register -AIC_IDCR # 4 ;- Interrupt Disable Command Register -AIC_ICCR # 4 ;- Interrupt Clear Command Register -AIC_ISCR # 4 ;- Interrupt Set Command Register -AIC_EOICR # 4 ;- End of Interrupt Command Register -AIC_SPU # 4 ;- Spurious Vector Register -AIC_DCR # 4 ;- Debug Control Register (Protect) - # 4 ;- Reserved -AIC_FFER # 4 ;- Fast Forcing Enable Register -AIC_FFDR # 4 ;- Fast Forcing Disable Register -AIC_FFSR # 4 ;- Fast Forcing Status Register -;- -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- -AT91C_AIC_PRIOR EQU (0x7:SHL:0) ;- (AIC) Priority Level -AT91C_AIC_PRIOR_LOWEST EQU (0x0) ;- (AIC) Lowest priority level -AT91C_AIC_PRIOR_HIGHEST EQU (0x7) ;- (AIC) Highest priority level -AT91C_AIC_SRCTYPE EQU (0x3:SHL:5) ;- (AIC) Interrupt Source Type -AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE EQU (0x0:SHL:5) ;- (AIC) Internal Sources Code Label Level Sensitive -AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED EQU (0x1:SHL:5) ;- (AIC) Internal Sources Code Label Edge triggered -AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL EQU (0x2:SHL:5) ;- (AIC) External Sources Code Label High-level Sensitive -AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE EQU (0x3:SHL:5) ;- (AIC) External Sources Code Label Positive Edge triggered -;- -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- -AT91C_AIC_NFIQ EQU (0x1:SHL:0) ;- (AIC) NFIQ Status -AT91C_AIC_NIRQ EQU (0x1:SHL:1) ;- (AIC) NIRQ Status -;- -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- -AT91C_AIC_DCR_PROT EQU (0x1:SHL:0) ;- (AIC) Protection Mode -AT91C_AIC_DCR_GMSK EQU (0x1:SHL:1) ;- (AIC) General Mask - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Serial Parallel Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SPI -SPI_CR # 4 ;- Control Register -SPI_MR # 4 ;- Mode Register -SPI_RDR # 4 ;- Receive Data Register -SPI_TDR # 4 ;- Transmit Data Register -SPI_SR # 4 ;- Status Register -SPI_IER # 4 ;- Interrupt Enable Register -SPI_IDR # 4 ;- Interrupt Disable Register -SPI_IMR # 4 ;- Interrupt Mask Register - # 16 ;- Reserved -SPI_CSR # 16 ;- Chip Select Register - # 192 ;- Reserved -SPI_RPR # 4 ;- Receive Pointer Register -SPI_RCR # 4 ;- Receive Counter Register -SPI_TPR # 4 ;- Transmit Pointer Register -SPI_TCR # 4 ;- Transmit Counter Register -SPI_RNPR # 4 ;- Receive Next Pointer Register -SPI_RNCR # 4 ;- Receive Next Counter Register -SPI_TNPR # 4 ;- Transmit Next Pointer Register -SPI_TNCR # 4 ;- Transmit Next Counter Register -SPI_PTCR # 4 ;- PDC Transfer Control Register -SPI_PTSR # 4 ;- PDC Transfer Status Register -;- -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- -AT91C_SPI_SPIEN EQU (0x1:SHL:0) ;- (SPI) SPI Enable -AT91C_SPI_SPIDIS EQU (0x1:SHL:1) ;- (SPI) SPI Disable -AT91C_SPI_SWRST EQU (0x1:SHL:7) ;- (SPI) SPI Software reset -;- -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- -AT91C_SPI_MSTR EQU (0x1:SHL:0) ;- (SPI) Master/Slave Mode -AT91C_SPI_PS EQU (0x1:SHL:1) ;- (SPI) Peripheral Select -AT91C_SPI_PS_FIXED EQU (0x0:SHL:1) ;- (SPI) Fixed Peripheral Select -AT91C_SPI_PS_VARIABLE EQU (0x1:SHL:1) ;- (SPI) Variable Peripheral Select -AT91C_SPI_PCSDEC EQU (0x1:SHL:2) ;- (SPI) Chip Select Decode -AT91C_SPI_DIV32 EQU (0x1:SHL:3) ;- (SPI) Clock Selection -AT91C_SPI_MODFDIS EQU (0x1:SHL:4) ;- (SPI) Mode Fault Detection -AT91C_SPI_LLB EQU (0x1:SHL:7) ;- (SPI) Clock Selection -AT91C_SPI_PCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select -AT91C_SPI_DLYBCS EQU (0xFF:SHL:24) ;- (SPI) Delay Between Chip Selects -;- -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- -AT91C_SPI_RD EQU (0xFFFF:SHL:0) ;- (SPI) Receive Data -AT91C_SPI_RPCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status -;- -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- -AT91C_SPI_TD EQU (0xFFFF:SHL:0) ;- (SPI) Transmit Data -AT91C_SPI_TPCS EQU (0xF:SHL:16) ;- (SPI) Peripheral Chip Select Status -;- -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- -AT91C_SPI_RDRF EQU (0x1:SHL:0) ;- (SPI) Receive Data Register Full -AT91C_SPI_TDRE EQU (0x1:SHL:1) ;- (SPI) Transmit Data Register Empty -AT91C_SPI_MODF EQU (0x1:SHL:2) ;- (SPI) Mode Fault Error -AT91C_SPI_OVRES EQU (0x1:SHL:3) ;- (SPI) Overrun Error Status -AT91C_SPI_SPENDRX EQU (0x1:SHL:4) ;- (SPI) End of Receiver Transfer -AT91C_SPI_SPENDTX EQU (0x1:SHL:5) ;- (SPI) End of Receiver Transfer -AT91C_SPI_RXBUFF EQU (0x1:SHL:6) ;- (SPI) RXBUFF Interrupt -AT91C_SPI_TXBUFE EQU (0x1:SHL:7) ;- (SPI) TXBUFE Interrupt -AT91C_SPI_SPIENS EQU (0x1:SHL:16) ;- (SPI) Enable Status -;- -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- -;- -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- -;- -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- -;- -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- -AT91C_SPI_CPOL EQU (0x1:SHL:0) ;- (SPI) Clock Polarity -AT91C_SPI_NCPHA EQU (0x1:SHL:1) ;- (SPI) Clock Phase -AT91C_SPI_BITS EQU (0xF:SHL:4) ;- (SPI) Bits Per Transfer -AT91C_SPI_BITS_8 EQU (0x0:SHL:4) ;- (SPI) 8 Bits Per transfer -AT91C_SPI_BITS_9 EQU (0x1:SHL:4) ;- (SPI) 9 Bits Per transfer -AT91C_SPI_BITS_10 EQU (0x2:SHL:4) ;- (SPI) 10 Bits Per transfer -AT91C_SPI_BITS_11 EQU (0x3:SHL:4) ;- (SPI) 11 Bits Per transfer -AT91C_SPI_BITS_12 EQU (0x4:SHL:4) ;- (SPI) 12 Bits Per transfer -AT91C_SPI_BITS_13 EQU (0x5:SHL:4) ;- (SPI) 13 Bits Per transfer -AT91C_SPI_BITS_14 EQU (0x6:SHL:4) ;- (SPI) 14 Bits Per transfer -AT91C_SPI_BITS_15 EQU (0x7:SHL:4) ;- (SPI) 15 Bits Per transfer -AT91C_SPI_BITS_16 EQU (0x8:SHL:4) ;- (SPI) 16 Bits Per transfer -AT91C_SPI_SCBR EQU (0xFF:SHL:8) ;- (SPI) Serial Clock Baud Rate -AT91C_SPI_DLYBS EQU (0xFF:SHL:16) ;- (SPI) Serial Clock Baud Rate -AT91C_SPI_DLYBCT EQU (0xFF:SHL:24) ;- (SPI) Delay Between Consecutive Transfers - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SSC -SSC_CR # 4 ;- Control Register -SSC_CMR # 4 ;- Clock Mode Register - # 8 ;- Reserved -SSC_RCMR # 4 ;- Receive Clock ModeRegister -SSC_RFMR # 4 ;- Receive Frame Mode Register -SSC_TCMR # 4 ;- Transmit Clock Mode Register -SSC_TFMR # 4 ;- Transmit Frame Mode Register -SSC_RHR # 4 ;- Receive Holding Register -SSC_THR # 4 ;- Transmit Holding Register - # 8 ;- Reserved -SSC_RSHR # 4 ;- Receive Sync Holding Register -SSC_TSHR # 4 ;- Transmit Sync Holding Register -SSC_RC0R # 4 ;- Receive Compare 0 Register -SSC_RC1R # 4 ;- Receive Compare 1 Register -SSC_SR # 4 ;- Status Register -SSC_IER # 4 ;- Interrupt Enable Register -SSC_IDR # 4 ;- Interrupt Disable Register -SSC_IMR # 4 ;- Interrupt Mask Register - # 176 ;- Reserved -SSC_RPR # 4 ;- Receive Pointer Register -SSC_RCR # 4 ;- Receive Counter Register -SSC_TPR # 4 ;- Transmit Pointer Register -SSC_TCR # 4 ;- Transmit Counter Register -SSC_RNPR # 4 ;- Receive Next Pointer Register -SSC_RNCR # 4 ;- Receive Next Counter Register -SSC_TNPR # 4 ;- Transmit Next Pointer Register -SSC_TNCR # 4 ;- Transmit Next Counter Register -SSC_PTCR # 4 ;- PDC Transfer Control Register -SSC_PTSR # 4 ;- PDC Transfer Status Register -;- -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- -AT91C_SSC_RXEN EQU (0x1:SHL:0) ;- (SSC) Receive Enable -AT91C_SSC_RXDIS EQU (0x1:SHL:1) ;- (SSC) Receive Disable -AT91C_SSC_TXEN EQU (0x1:SHL:8) ;- (SSC) Transmit Enable -AT91C_SSC_TXDIS EQU (0x1:SHL:9) ;- (SSC) Transmit Disable -AT91C_SSC_SWRST EQU (0x1:SHL:15) ;- (SSC) Software Reset -;- -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- -AT91C_SSC_CKS EQU (0x3:SHL:0) ;- (SSC) Receive/Transmit Clock Selection -AT91C_SSC_CKS_DIV EQU (0x0) ;- (SSC) Divided Clock -AT91C_SSC_CKS_TK EQU (0x1) ;- (SSC) TK Clock signal -AT91C_SSC_CKS_RK EQU (0x2) ;- (SSC) RK pin -AT91C_SSC_CKO EQU (0x7:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode Selection -AT91C_SSC_CKO_NONE EQU (0x0:SHL:2) ;- (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only -AT91C_SSC_CKO_CONTINOUS EQU (0x1:SHL:2) ;- (SSC) Continuous Receive/Transmit Clock RK pin: Output -AT91C_SSC_CKO_DATA_TX EQU (0x2:SHL:2) ;- (SSC) Receive/Transmit Clock only during data transfers RK pin: Output -AT91C_SSC_CKI EQU (0x1:SHL:5) ;- (SSC) Receive/Transmit Clock Inversion -AT91C_SSC_CKG EQU (0x3:SHL:6) ;- (SSC) Receive/Transmit Clock Gating Selection -AT91C_SSC_CKG_NONE EQU (0x0:SHL:6) ;- (SSC) Receive/Transmit Clock Gating: None, continuous clock -AT91C_SSC_CKG_LOW EQU (0x1:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF Low -AT91C_SSC_CKG_HIGH EQU (0x2:SHL:6) ;- (SSC) Receive/Transmit Clock enabled only if RF High -AT91C_SSC_START EQU (0xF:SHL:8) ;- (SSC) Receive/Transmit Start Selection -AT91C_SSC_START_CONTINOUS EQU (0x0:SHL:8) ;- (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. -AT91C_SSC_START_TX EQU (0x1:SHL:8) ;- (SSC) Transmit/Receive start -AT91C_SSC_START_LOW_RF EQU (0x2:SHL:8) ;- (SSC) Detection of a low level on RF input -AT91C_SSC_START_HIGH_RF EQU (0x3:SHL:8) ;- (SSC) Detection of a high level on RF input -AT91C_SSC_START_FALL_RF EQU (0x4:SHL:8) ;- (SSC) Detection of a falling edge on RF input -AT91C_SSC_START_RISE_RF EQU (0x5:SHL:8) ;- (SSC) Detection of a rising edge on RF input -AT91C_SSC_START_LEVEL_RF EQU (0x6:SHL:8) ;- (SSC) Detection of any level change on RF input -AT91C_SSC_START_EDGE_RF EQU (0x7:SHL:8) ;- (SSC) Detection of any edge on RF input -AT91C_SSC_START_0 EQU (0x8:SHL:8) ;- (SSC) Compare 0 -AT91C_SSC_STOP EQU (0x1:SHL:12) ;- (SSC) Receive Stop Selection -AT91C_SSC_STTOUT EQU (0x1:SHL:15) ;- (SSC) Receive/Transmit Start Output Selection -AT91C_SSC_STTDLY EQU (0xFF:SHL:16) ;- (SSC) Receive/Transmit Start Delay -AT91C_SSC_PERIOD EQU (0xFF:SHL:24) ;- (SSC) Receive/Transmit Period Divider Selection -;- -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- -AT91C_SSC_DATLEN EQU (0x1F:SHL:0) ;- (SSC) Data Length -AT91C_SSC_LOOP EQU (0x1:SHL:5) ;- (SSC) Loop Mode -AT91C_SSC_MSBF EQU (0x1:SHL:7) ;- (SSC) Most Significant Bit First -AT91C_SSC_DATNB EQU (0xF:SHL:8) ;- (SSC) Data Number per Frame -AT91C_SSC_FSLEN EQU (0xF:SHL:16) ;- (SSC) Receive/Transmit Frame Sync length -AT91C_SSC_FSOS EQU (0x7:SHL:20) ;- (SSC) Receive/Transmit Frame Sync Output Selection -AT91C_SSC_FSOS_NONE EQU (0x0:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only -AT91C_SSC_FSOS_NEGATIVE EQU (0x1:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse -AT91C_SSC_FSOS_POSITIVE EQU (0x2:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse -AT91C_SSC_FSOS_LOW EQU (0x3:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer -AT91C_SSC_FSOS_HIGH EQU (0x4:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer -AT91C_SSC_FSOS_TOGGLE EQU (0x5:SHL:20) ;- (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer -AT91C_SSC_FSEDGE EQU (0x1:SHL:24) ;- (SSC) Frame Sync Edge Detection -;- -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- -;- -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- -AT91C_SSC_DATDEF EQU (0x1:SHL:5) ;- (SSC) Data Default Value -AT91C_SSC_FSDEN EQU (0x1:SHL:23) ;- (SSC) Frame Sync Data Enable -;- -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- -AT91C_SSC_TXRDY EQU (0x1:SHL:0) ;- (SSC) Transmit Ready -AT91C_SSC_TXEMPTY EQU (0x1:SHL:1) ;- (SSC) Transmit Empty -AT91C_SSC_ENDTX EQU (0x1:SHL:2) ;- (SSC) End Of Transmission -AT91C_SSC_TXBUFE EQU (0x1:SHL:3) ;- (SSC) Transmit Buffer Empty -AT91C_SSC_RXRDY EQU (0x1:SHL:4) ;- (SSC) Receive Ready -AT91C_SSC_OVRUN EQU (0x1:SHL:5) ;- (SSC) Receive Overrun -AT91C_SSC_ENDRX EQU (0x1:SHL:6) ;- (SSC) End of Reception -AT91C_SSC_RXBUFF EQU (0x1:SHL:7) ;- (SSC) Receive Buffer Full -AT91C_SSC_CP0 EQU (0x1:SHL:8) ;- (SSC) Compare 0 -AT91C_SSC_CP1 EQU (0x1:SHL:9) ;- (SSC) Compare 1 -AT91C_SSC_TXSYN EQU (0x1:SHL:10) ;- (SSC) Transmit Sync -AT91C_SSC_RXSYN EQU (0x1:SHL:11) ;- (SSC) Receive Sync -AT91C_SSC_TXENA EQU (0x1:SHL:16) ;- (SSC) Transmit Enable -AT91C_SSC_RXENA EQU (0x1:SHL:17) ;- (SSC) Receive Enable -;- -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- -;- -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- -;- -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Usart -;- ***************************************************************************** - ^ 0 ;- AT91S_USART -US_CR # 4 ;- Control Register -US_MR # 4 ;- Mode Register -US_IER # 4 ;- Interrupt Enable Register -US_IDR # 4 ;- Interrupt Disable Register -US_IMR # 4 ;- Interrupt Mask Register -US_CSR # 4 ;- Channel Status Register -US_RHR # 4 ;- Receiver Holding Register -US_THR # 4 ;- Transmitter Holding Register -US_BRGR # 4 ;- Baud Rate Generator Register -US_RTOR # 4 ;- Receiver Time-out Register -US_TTGR # 4 ;- Transmitter Time-guard Register - # 20 ;- Reserved -US_FIDI # 4 ;- FI_DI_Ratio Register -US_NER # 4 ;- Nb Errors Register -US_XXR # 4 ;- XON_XOFF Register -US_IF # 4 ;- IRDA_FILTER Register - # 176 ;- Reserved -US_RPR # 4 ;- Receive Pointer Register -US_RCR # 4 ;- Receive Counter Register -US_TPR # 4 ;- Transmit Pointer Register -US_TCR # 4 ;- Transmit Counter Register -US_RNPR # 4 ;- Receive Next Pointer Register -US_RNCR # 4 ;- Receive Next Counter Register -US_TNPR # 4 ;- Transmit Next Pointer Register -US_TNCR # 4 ;- Transmit Next Counter Register -US_PTCR # 4 ;- PDC Transfer Control Register -US_PTSR # 4 ;- PDC Transfer Status Register -;- -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- -AT91C_US_RSTSTA EQU (0x1:SHL:8) ;- (USART) Reset Status Bits -AT91C_US_STTBRK EQU (0x1:SHL:9) ;- (USART) Start Break -AT91C_US_STPBRK EQU (0x1:SHL:10) ;- (USART) Stop Break -AT91C_US_STTTO EQU (0x1:SHL:11) ;- (USART) Start Time-out -AT91C_US_SENDA EQU (0x1:SHL:12) ;- (USART) Send Address -AT91C_US_RSTIT EQU (0x1:SHL:13) ;- (USART) Reset Iterations -AT91C_US_RSTNACK EQU (0x1:SHL:14) ;- (USART) Reset Non Acknowledge -AT91C_US_RETTO EQU (0x1:SHL:15) ;- (USART) Rearm Time-out -AT91C_US_DTREN EQU (0x1:SHL:16) ;- (USART) Data Terminal ready Enable -AT91C_US_DTRDIS EQU (0x1:SHL:17) ;- (USART) Data Terminal ready Disable -AT91C_US_RTSEN EQU (0x1:SHL:18) ;- (USART) Request to Send enable -AT91C_US_RTSDIS EQU (0x1:SHL:19) ;- (USART) Request to Send Disable -;- -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- -AT91C_US_USMODE EQU (0xF:SHL:0) ;- (USART) Usart mode -AT91C_US_USMODE_NORMAL EQU (0x0) ;- (USART) Normal -AT91C_US_USMODE_RS485 EQU (0x1) ;- (USART) RS485 -AT91C_US_USMODE_HWHSH EQU (0x2) ;- (USART) Hardware Handshaking -AT91C_US_USMODE_MODEM EQU (0x3) ;- (USART) Modem -AT91C_US_USMODE_ISO7816_0 EQU (0x4) ;- (USART) ISO7816 protocol: T = 0 -AT91C_US_USMODE_ISO7816_1 EQU (0x6) ;- (USART) ISO7816 protocol: T = 1 -AT91C_US_USMODE_IRDA EQU (0x8) ;- (USART) IrDA -AT91C_US_USMODE_SWHSH EQU (0xC) ;- (USART) Software Handshaking -AT91C_US_CLKS EQU (0x3:SHL:4) ;- (USART) Clock Selection (Baud Rate generator Input Clock -AT91C_US_CLKS_CLOCK EQU (0x0:SHL:4) ;- (USART) Clock -AT91C_US_CLKS_FDIV1 EQU (0x1:SHL:4) ;- (USART) fdiv1 -AT91C_US_CLKS_SLOW EQU (0x2:SHL:4) ;- (USART) slow_clock (ARM) -AT91C_US_CLKS_EXT EQU (0x3:SHL:4) ;- (USART) External (SCK) -AT91C_US_CHRL EQU (0x3:SHL:6) ;- (USART) Clock Selection (Baud Rate generator Input Clock -AT91C_US_CHRL_5_BITS EQU (0x0:SHL:6) ;- (USART) Character Length: 5 bits -AT91C_US_CHRL_6_BITS EQU (0x1:SHL:6) ;- (USART) Character Length: 6 bits -AT91C_US_CHRL_7_BITS EQU (0x2:SHL:6) ;- (USART) Character Length: 7 bits -AT91C_US_CHRL_8_BITS EQU (0x3:SHL:6) ;- (USART) Character Length: 8 bits -AT91C_US_SYNC EQU (0x1:SHL:8) ;- (USART) Synchronous Mode Select -AT91C_US_NBSTOP EQU (0x3:SHL:12) ;- (USART) Number of Stop bits -AT91C_US_NBSTOP_1_BIT EQU (0x0:SHL:12) ;- (USART) 1 stop bit -AT91C_US_NBSTOP_15_BIT EQU (0x1:SHL:12) ;- (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits -AT91C_US_NBSTOP_2_BIT EQU (0x2:SHL:12) ;- (USART) 2 stop bits -AT91C_US_MSBF EQU (0x1:SHL:16) ;- (USART) Bit Order -AT91C_US_MODE9 EQU (0x1:SHL:17) ;- (USART) 9-bit Character length -AT91C_US_CKLO EQU (0x1:SHL:18) ;- (USART) Clock Output Select -AT91C_US_OVER EQU (0x1:SHL:19) ;- (USART) Over Sampling Mode -AT91C_US_INACK EQU (0x1:SHL:20) ;- (USART) Inhibit Non Acknowledge -AT91C_US_DSNACK EQU (0x1:SHL:21) ;- (USART) Disable Successive NACK -AT91C_US_MAX_ITER EQU (0x1:SHL:24) ;- (USART) Number of Repetitions -AT91C_US_FILTER EQU (0x1:SHL:28) ;- (USART) Receive Line Filter -;- -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- -AT91C_US_RXBRK EQU (0x1:SHL:2) ;- (USART) Break Received/End of Break -AT91C_US_TIMEOUT EQU (0x1:SHL:8) ;- (USART) Receiver Time-out -AT91C_US_ITERATION EQU (0x1:SHL:10) ;- (USART) Max number of Repetitions Reached -AT91C_US_NACK EQU (0x1:SHL:13) ;- (USART) Non Acknowledge -AT91C_US_RIIC EQU (0x1:SHL:16) ;- (USART) Ring INdicator Input Change Flag -AT91C_US_DSRIC EQU (0x1:SHL:17) ;- (USART) Data Set Ready Input Change Flag -AT91C_US_DCDIC EQU (0x1:SHL:18) ;- (USART) Data Carrier Flag -AT91C_US_CTSIC EQU (0x1:SHL:19) ;- (USART) Clear To Send Input Change Flag -;- -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- -;- -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- -;- -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- -AT91C_US_RI EQU (0x1:SHL:20) ;- (USART) Image of RI Input -AT91C_US_DSR EQU (0x1:SHL:21) ;- (USART) Image of DSR Input -AT91C_US_DCD EQU (0x1:SHL:22) ;- (USART) Image of DCD Input -AT91C_US_CTS EQU (0x1:SHL:23) ;- (USART) Image of CTS Input - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Two-wire Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_TWI -TWI_CR # 4 ;- Control Register -TWI_MMR # 4 ;- Master Mode Register -TWI_SMR # 4 ;- Slave Mode Register -TWI_IADR # 4 ;- Internal Address Register -TWI_CWGR # 4 ;- Clock Waveform Generator Register - # 12 ;- Reserved -TWI_SR # 4 ;- Status Register -TWI_IER # 4 ;- Interrupt Enable Register -TWI_IDR # 4 ;- Interrupt Disable Register -TWI_IMR # 4 ;- Interrupt Mask Register -TWI_RHR # 4 ;- Receive Holding Register -TWI_THR # 4 ;- Transmit Holding Register -;- -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- -AT91C_TWI_START EQU (0x1:SHL:0) ;- (TWI) Send a START Condition -AT91C_TWI_STOP EQU (0x1:SHL:1) ;- (TWI) Send a STOP Condition -AT91C_TWI_MSEN EQU (0x1:SHL:2) ;- (TWI) TWI Master Transfer Enabled -AT91C_TWI_MSDIS EQU (0x1:SHL:3) ;- (TWI) TWI Master Transfer Disabled -AT91C_TWI_SVEN EQU (0x1:SHL:4) ;- (TWI) TWI Slave Transfer Enabled -AT91C_TWI_SVDIS EQU (0x1:SHL:5) ;- (TWI) TWI Slave Transfer Disabled -AT91C_TWI_SWRST EQU (0x1:SHL:7) ;- (TWI) Software Reset -;- -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- -AT91C_TWI_IADRSZ EQU (0x3:SHL:8) ;- (TWI) Internal Device Address Size -AT91C_TWI_IADRSZ_NO EQU (0x0:SHL:8) ;- (TWI) No internal device address -AT91C_TWI_IADRSZ_1_BYTE EQU (0x1:SHL:8) ;- (TWI) One-byte internal device address -AT91C_TWI_IADRSZ_2_BYTE EQU (0x2:SHL:8) ;- (TWI) Two-byte internal device address -AT91C_TWI_IADRSZ_3_BYTE EQU (0x3:SHL:8) ;- (TWI) Three-byte internal device address -AT91C_TWI_MREAD EQU (0x1:SHL:12) ;- (TWI) Master Read Direction -AT91C_TWI_DADR EQU (0x7F:SHL:16) ;- (TWI) Device Address -;- -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- -AT91C_TWI_SADR EQU (0x7F:SHL:16) ;- (TWI) Slave Device Address -;- -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- -AT91C_TWI_CLDIV EQU (0xFF:SHL:0) ;- (TWI) Clock Low Divider -AT91C_TWI_CHDIV EQU (0xFF:SHL:8) ;- (TWI) Clock High Divider -AT91C_TWI_CKDIV EQU (0x7:SHL:16) ;- (TWI) Clock Divider -;- -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- -AT91C_TWI_TXCOMP EQU (0x1:SHL:0) ;- (TWI) Transmission Completed -AT91C_TWI_RXRDY EQU (0x1:SHL:1) ;- (TWI) Receive holding register ReaDY -AT91C_TWI_TXRDY EQU (0x1:SHL:2) ;- (TWI) Transmit holding register ReaDY -AT91C_TWI_SVREAD EQU (0x1:SHL:3) ;- (TWI) Slave Read -AT91C_TWI_SVACC EQU (0x1:SHL:4) ;- (TWI) Slave Access -AT91C_TWI_GCACC EQU (0x1:SHL:5) ;- (TWI) General Call Access -AT91C_TWI_OVRE EQU (0x1:SHL:6) ;- (TWI) Overrun Error -AT91C_TWI_UNRE EQU (0x1:SHL:7) ;- (TWI) Underrun Error -AT91C_TWI_NACK EQU (0x1:SHL:8) ;- (TWI) Not Acknowledged -AT91C_TWI_ARBLST EQU (0x1:SHL:9) ;- (TWI) Arbitration Lost -;- -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- -;- -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- -;- -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Multimedia Card Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_MCI -MCI_CR # 4 ;- MCI Control Register -MCI_MR # 4 ;- MCI Mode Register -MCI_DTOR # 4 ;- MCI Data Timeout Register -MCI_SDCR # 4 ;- MCI SD Card Register -MCI_ARGR # 4 ;- MCI Argument Register -MCI_CMDR # 4 ;- MCI Command Register - # 8 ;- Reserved -MCI_RSPR # 16 ;- MCI Response Register -MCI_RDR # 4 ;- MCI Receive Data Register -MCI_TDR # 4 ;- MCI Transmit Data Register - # 8 ;- Reserved -MCI_SR # 4 ;- MCI Status Register -MCI_IER # 4 ;- MCI Interrupt Enable Register -MCI_IDR # 4 ;- MCI Interrupt Disable Register -MCI_IMR # 4 ;- MCI Interrupt Mask Register - # 176 ;- Reserved -MCI_RPR # 4 ;- Receive Pointer Register -MCI_RCR # 4 ;- Receive Counter Register -MCI_TPR # 4 ;- Transmit Pointer Register -MCI_TCR # 4 ;- Transmit Counter Register -MCI_RNPR # 4 ;- Receive Next Pointer Register -MCI_RNCR # 4 ;- Receive Next Counter Register -MCI_TNPR # 4 ;- Transmit Next Pointer Register -MCI_TNCR # 4 ;- Transmit Next Counter Register -MCI_PTCR # 4 ;- PDC Transfer Control Register -MCI_PTSR # 4 ;- PDC Transfer Status Register -;- -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- -AT91C_MCI_MCIEN EQU (0x1:SHL:0) ;- (MCI) Multimedia Interface Enable -AT91C_MCI_MCIDIS EQU (0x1:SHL:1) ;- (MCI) Multimedia Interface Disable -AT91C_MCI_PWSEN EQU (0x1:SHL:2) ;- (MCI) Power Save Mode Enable -AT91C_MCI_PWSDIS EQU (0x1:SHL:3) ;- (MCI) Power Save Mode Disable -;- -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- -AT91C_MCI_CLKDIV EQU (0x1:SHL:0) ;- (MCI) Clock Divider -AT91C_MCI_PWSDIV EQU (0x1:SHL:8) ;- (MCI) Power Saving Divider -AT91C_MCI_PDCPADV EQU (0x1:SHL:14) ;- (MCI) PDC Padding Value -AT91C_MCI_PDCMODE EQU (0x1:SHL:15) ;- (MCI) PDC Oriented Mode -AT91C_MCI_BLKLEN EQU (0x1:SHL:18) ;- (MCI) Data Block Length -;- -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- -AT91C_MCI_DTOCYC EQU (0x1:SHL:0) ;- (MCI) Data Timeout Cycle Number -AT91C_MCI_DTOMUL EQU (0x7:SHL:4) ;- (MCI) Data Timeout Multiplier -AT91C_MCI_DTOMUL_1 EQU (0x0:SHL:4) ;- (MCI) DTOCYC x 1 -AT91C_MCI_DTOMUL_16 EQU (0x1:SHL:4) ;- (MCI) DTOCYC x 16 -AT91C_MCI_DTOMUL_128 EQU (0x2:SHL:4) ;- (MCI) DTOCYC x 128 -AT91C_MCI_DTOMUL_256 EQU (0x3:SHL:4) ;- (MCI) DTOCYC x 256 -AT91C_MCI_DTOMUL_1024 EQU (0x4:SHL:4) ;- (MCI) DTOCYC x 1024 -AT91C_MCI_DTOMUL_4096 EQU (0x5:SHL:4) ;- (MCI) DTOCYC x 4096 -AT91C_MCI_DTOMUL_65536 EQU (0x6:SHL:4) ;- (MCI) DTOCYC x 65536 -AT91C_MCI_DTOMUL_1048576 EQU (0x7:SHL:4) ;- (MCI) DTOCYC x 1048576 -;- -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- -AT91C_MCI_SCDSEL EQU (0x1:SHL:0) ;- (MCI) SD Card Selector -AT91C_MCI_SCDBUS EQU (0x1:SHL:7) ;- (MCI) SD Card Bus Width -;- -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- -AT91C_MCI_CMDNB EQU (0x1F:SHL:0) ;- (MCI) Command Number -AT91C_MCI_RSPTYP EQU (0x3:SHL:6) ;- (MCI) Response Type -AT91C_MCI_RSPTYP_NO EQU (0x0:SHL:6) ;- (MCI) No response -AT91C_MCI_RSPTYP_48 EQU (0x1:SHL:6) ;- (MCI) 48-bit response -AT91C_MCI_RSPTYP_136 EQU (0x2:SHL:6) ;- (MCI) 136-bit response -AT91C_MCI_SPCMD EQU (0x7:SHL:8) ;- (MCI) Special CMD -AT91C_MCI_SPCMD_NONE EQU (0x0:SHL:8) ;- (MCI) Not a special CMD -AT91C_MCI_SPCMD_INIT EQU (0x1:SHL:8) ;- (MCI) Initialization CMD -AT91C_MCI_SPCMD_SYNC EQU (0x2:SHL:8) ;- (MCI) Synchronized CMD -AT91C_MCI_SPCMD_IT_CMD EQU (0x4:SHL:8) ;- (MCI) Interrupt command -AT91C_MCI_SPCMD_IT_REP EQU (0x5:SHL:8) ;- (MCI) Interrupt response -AT91C_MCI_OPDCMD EQU (0x1:SHL:11) ;- (MCI) Open Drain Command -AT91C_MCI_MAXLAT EQU (0x1:SHL:12) ;- (MCI) Maximum Latency for Command to respond -AT91C_MCI_TRCMD EQU (0x3:SHL:16) ;- (MCI) Transfer CMD -AT91C_MCI_TRCMD_NO EQU (0x0:SHL:16) ;- (MCI) No transfer -AT91C_MCI_TRCMD_START EQU (0x1:SHL:16) ;- (MCI) Start transfer -AT91C_MCI_TRCMD_STOP EQU (0x2:SHL:16) ;- (MCI) Stop transfer -AT91C_MCI_TRDIR EQU (0x1:SHL:18) ;- (MCI) Transfer Direction -AT91C_MCI_TRTYP EQU (0x3:SHL:19) ;- (MCI) Transfer Type -AT91C_MCI_TRTYP_BLOCK EQU (0x0:SHL:19) ;- (MCI) Block Transfer type -AT91C_MCI_TRTYP_MULTIPLE EQU (0x1:SHL:19) ;- (MCI) Multiple Block transfer type -AT91C_MCI_TRTYP_STREAM EQU (0x2:SHL:19) ;- (MCI) Stream transfer type -;- -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- -AT91C_MCI_CMDRDY EQU (0x1:SHL:0) ;- (MCI) Command Ready flag -AT91C_MCI_RXRDY EQU (0x1:SHL:1) ;- (MCI) RX Ready flag -AT91C_MCI_TXRDY EQU (0x1:SHL:2) ;- (MCI) TX Ready flag -AT91C_MCI_BLKE EQU (0x1:SHL:3) ;- (MCI) Data Block Transfer Ended flag -AT91C_MCI_DTIP EQU (0x1:SHL:4) ;- (MCI) Data Transfer in Progress flag -AT91C_MCI_NOTBUSY EQU (0x1:SHL:5) ;- (MCI) Data Line Not Busy flag -AT91C_MCI_ENDRX EQU (0x1:SHL:6) ;- (MCI) End of RX Buffer flag -AT91C_MCI_ENDTX EQU (0x1:SHL:7) ;- (MCI) End of TX Buffer flag -AT91C_MCI_RXBUFF EQU (0x1:SHL:14) ;- (MCI) RX Buffer Full flag -AT91C_MCI_TXBUFE EQU (0x1:SHL:15) ;- (MCI) TX Buffer Empty flag -AT91C_MCI_RINDE EQU (0x1:SHL:16) ;- (MCI) Response Index Error flag -AT91C_MCI_RDIRE EQU (0x1:SHL:17) ;- (MCI) Response Direction Error flag -AT91C_MCI_RCRCE EQU (0x1:SHL:18) ;- (MCI) Response CRC Error flag -AT91C_MCI_RENDE EQU (0x1:SHL:19) ;- (MCI) Response End Bit Error flag -AT91C_MCI_RTOE EQU (0x1:SHL:20) ;- (MCI) Response Time-out Error flag -AT91C_MCI_DCRCE EQU (0x1:SHL:21) ;- (MCI) data CRC Error flag -AT91C_MCI_DTOE EQU (0x1:SHL:22) ;- (MCI) Data timeout Error flag -AT91C_MCI_OVRE EQU (0x1:SHL:30) ;- (MCI) Overrun flag -AT91C_MCI_UNRE EQU (0x1:SHL:31) ;- (MCI) Underrun flag -;- -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- -;- -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- -;- -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR USB Device Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_UDP -UDP_NUM # 4 ;- Frame Number Register -UDP_GLBSTATE # 4 ;- Global State Register -UDP_FADDR # 4 ;- Function Address Register - # 4 ;- Reserved -UDP_IER # 4 ;- Interrupt Enable Register -UDP_IDR # 4 ;- Interrupt Disable Register -UDP_IMR # 4 ;- Interrupt Mask Register -UDP_ISR # 4 ;- Interrupt Status Register -UDP_ICR # 4 ;- Interrupt Clear Register - # 4 ;- Reserved -UDP_RSTEP # 4 ;- Reset Endpoint Register - # 4 ;- Reserved -UDP_CSR # 32 ;- Endpoint Control and Status Register -UDP_FDR # 32 ;- Endpoint FIFO Data Register -;- -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- -AT91C_UDP_FRM_NUM EQU (0x7FF:SHL:0) ;- (UDP) Frame Number as Defined in the Packet Field Formats -AT91C_UDP_FRM_ERR EQU (0x1:SHL:16) ;- (UDP) Frame Error -AT91C_UDP_FRM_OK EQU (0x1:SHL:17) ;- (UDP) Frame OK -;- -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- -AT91C_UDP_FADDEN EQU (0x1:SHL:0) ;- (UDP) Function Address Enable -AT91C_UDP_CONFG EQU (0x1:SHL:1) ;- (UDP) Configured -AT91C_UDP_RMWUPE EQU (0x1:SHL:2) ;- (UDP) Remote Wake Up Enable -AT91C_UDP_RSMINPR EQU (0x1:SHL:3) ;- (UDP) A Resume Has Been Sent to the Host -;- -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- -AT91C_UDP_FADD EQU (0xFF:SHL:0) ;- (UDP) Function Address Value -AT91C_UDP_FEN EQU (0x1:SHL:8) ;- (UDP) Function Enable -;- -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- -AT91C_UDP_EPINT0 EQU (0x1:SHL:0) ;- (UDP) Endpoint 0 Interrupt -AT91C_UDP_EPINT1 EQU (0x1:SHL:1) ;- (UDP) Endpoint 0 Interrupt -AT91C_UDP_EPINT2 EQU (0x1:SHL:2) ;- (UDP) Endpoint 2 Interrupt -AT91C_UDP_EPINT3 EQU (0x1:SHL:3) ;- (UDP) Endpoint 3 Interrupt -AT91C_UDP_EPINT4 EQU (0x1:SHL:4) ;- (UDP) Endpoint 4 Interrupt -AT91C_UDP_EPINT5 EQU (0x1:SHL:5) ;- (UDP) Endpoint 5 Interrupt -AT91C_UDP_EPINT6 EQU (0x1:SHL:6) ;- (UDP) Endpoint 6 Interrupt -AT91C_UDP_EPINT7 EQU (0x1:SHL:7) ;- (UDP) Endpoint 7 Interrupt -AT91C_UDP_RXSUSP EQU (0x1:SHL:8) ;- (UDP) USB Suspend Interrupt -AT91C_UDP_RXRSM EQU (0x1:SHL:9) ;- (UDP) USB Resume Interrupt -AT91C_UDP_EXTRSM EQU (0x1:SHL:10) ;- (UDP) USB External Resume Interrupt -AT91C_UDP_SOFINT EQU (0x1:SHL:11) ;- (UDP) USB Start Of frame Interrupt -AT91C_UDP_WAKEUP EQU (0x1:SHL:13) ;- (UDP) USB Resume Interrupt -;- -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- -;- -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- -;- -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- -AT91C_UDP_ENDBUSRES EQU (0x1:SHL:12) ;- (UDP) USB End Of Bus Reset Interrupt -;- -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- -;- -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- -AT91C_UDP_EP0 EQU (0x1:SHL:0) ;- (UDP) Reset Endpoint 0 -AT91C_UDP_EP1 EQU (0x1:SHL:1) ;- (UDP) Reset Endpoint 1 -AT91C_UDP_EP2 EQU (0x1:SHL:2) ;- (UDP) Reset Endpoint 2 -AT91C_UDP_EP3 EQU (0x1:SHL:3) ;- (UDP) Reset Endpoint 3 -AT91C_UDP_EP4 EQU (0x1:SHL:4) ;- (UDP) Reset Endpoint 4 -AT91C_UDP_EP5 EQU (0x1:SHL:5) ;- (UDP) Reset Endpoint 5 -AT91C_UDP_EP6 EQU (0x1:SHL:6) ;- (UDP) Reset Endpoint 6 -AT91C_UDP_EP7 EQU (0x1:SHL:7) ;- (UDP) Reset Endpoint 7 -;- -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- -AT91C_UDP_TXCOMP EQU (0x1:SHL:0) ;- (UDP) Generates an IN packet with data previously written in the DPR -AT91C_UDP_RX_DATA_BK0 EQU (0x1:SHL:1) ;- (UDP) Receive Data Bank 0 -AT91C_UDP_RXSETUP EQU (0x1:SHL:2) ;- (UDP) Sends STALL to the Host (Control endpoints) -AT91C_UDP_ISOERROR EQU (0x1:SHL:3) ;- (UDP) Isochronous error (Isochronous endpoints) -AT91C_UDP_TXPKTRDY EQU (0x1:SHL:4) ;- (UDP) Transmit Packet Ready -AT91C_UDP_FORCESTALL EQU (0x1:SHL:5) ;- (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). -AT91C_UDP_RX_DATA_BK1 EQU (0x1:SHL:6) ;- (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). -AT91C_UDP_DIR EQU (0x1:SHL:7) ;- (UDP) Transfer Direction -AT91C_UDP_EPTYPE EQU (0x7:SHL:8) ;- (UDP) Endpoint type -AT91C_UDP_EPTYPE_CTRL EQU (0x0:SHL:8) ;- (UDP) Control -AT91C_UDP_EPTYPE_ISO_OUT EQU (0x1:SHL:8) ;- (UDP) Isochronous OUT -AT91C_UDP_EPTYPE_BULK_OUT EQU (0x2:SHL:8) ;- (UDP) Bulk OUT -AT91C_UDP_EPTYPE_INT_OUT EQU (0x3:SHL:8) ;- (UDP) Interrupt OUT -AT91C_UDP_EPTYPE_ISO_IN EQU (0x5:SHL:8) ;- (UDP) Isochronous IN -AT91C_UDP_EPTYPE_BULK_IN EQU (0x6:SHL:8) ;- (UDP) Bulk IN -AT91C_UDP_EPTYPE_INT_IN EQU (0x7:SHL:8) ;- (UDP) Interrupt IN -AT91C_UDP_DTGLE EQU (0x1:SHL:11) ;- (UDP) Data Toggle -AT91C_UDP_EPEDS EQU (0x1:SHL:15) ;- (UDP) Endpoint Enable Disable -AT91C_UDP_RXBYTECNT EQU (0x7FF:SHL:16) ;- (UDP) Number Of Bytes Available in the FIFO - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Timer Counter Channel Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_TC -TC_CCR # 4 ;- Channel Control Register -TC_CMR # 4 ;- Channel Mode Register - # 8 ;- Reserved -TC_CV # 4 ;- Counter Value -TC_RA # 4 ;- Register A -TC_RB # 4 ;- Register B -TC_RC # 4 ;- Register C -TC_SR # 4 ;- Status Register -TC_IER # 4 ;- Interrupt Enable Register -TC_IDR # 4 ;- Interrupt Disable Register -TC_IMR # 4 ;- Interrupt Mask Register -;- -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- -AT91C_TC_CLKEN EQU (0x1:SHL:0) ;- (TC) Counter Clock Enable Command -AT91C_TC_CLKDIS EQU (0x1:SHL:1) ;- (TC) Counter Clock Disable Command -AT91C_TC_SWTRG EQU (0x1:SHL:2) ;- (TC) Software Trigger Command -;- -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- -AT91C_TC_CPCSTOP EQU (0x1:SHL:6) ;- (TC) Counter Clock Stopped with RC Compare -AT91C_TC_CPCDIS EQU (0x1:SHL:7) ;- (TC) Counter Clock Disable with RC Compare -AT91C_TC_EEVTEDG EQU (0x3:SHL:8) ;- (TC) External Event Edge Selection -AT91C_TC_EEVTEDG_NONE EQU (0x0:SHL:8) ;- (TC) Edge: None -AT91C_TC_EEVTEDG_RISING EQU (0x1:SHL:8) ;- (TC) Edge: rising edge -AT91C_TC_EEVTEDG_FALLING EQU (0x2:SHL:8) ;- (TC) Edge: falling edge -AT91C_TC_EEVTEDG_BOTH EQU (0x3:SHL:8) ;- (TC) Edge: each edge -AT91C_TC_EEVT EQU (0x3:SHL:10) ;- (TC) External Event Selection -AT91C_TC_EEVT_NONE EQU (0x0:SHL:10) ;- (TC) Signal selected as external event: TIOB TIOB direction: input -AT91C_TC_EEVT_RISING EQU (0x1:SHL:10) ;- (TC) Signal selected as external event: XC0 TIOB direction: output -AT91C_TC_EEVT_FALLING EQU (0x2:SHL:10) ;- (TC) Signal selected as external event: XC1 TIOB direction: output -AT91C_TC_EEVT_BOTH EQU (0x3:SHL:10) ;- (TC) Signal selected as external event: XC2 TIOB direction: output -AT91C_TC_ENETRG EQU (0x1:SHL:12) ;- (TC) External Event Trigger enable -AT91C_TC_WAVESEL EQU (0x3:SHL:13) ;- (TC) Waveform Selection -AT91C_TC_WAVESEL_UP EQU (0x0:SHL:13) ;- (TC) UP mode without atomatic trigger on RC Compare -AT91C_TC_WAVESEL_UPDOWN EQU (0x1:SHL:13) ;- (TC) UPDOWN mode without automatic trigger on RC Compare -AT91C_TC_WAVESEL_UP_AUTO EQU (0x2:SHL:13) ;- (TC) UP mode with automatic trigger on RC Compare -AT91C_TC_WAVESEL_UPDOWN_AUTO EQU (0x3:SHL:13) ;- (TC) UPDOWN mode with automatic trigger on RC Compare -AT91C_TC_CPCTRG EQU (0x1:SHL:14) ;- (TC) RC Compare Trigger Enable -AT91C_TC_WAVE EQU (0x1:SHL:15) ;- (TC) -AT91C_TC_ACPA EQU (0x3:SHL:16) ;- (TC) RA Compare Effect on TIOA -AT91C_TC_ACPA_NONE EQU (0x0:SHL:16) ;- (TC) Effect: none -AT91C_TC_ACPA_SET EQU (0x1:SHL:16) ;- (TC) Effect: set -AT91C_TC_ACPA_CLEAR EQU (0x2:SHL:16) ;- (TC) Effect: clear -AT91C_TC_ACPA_TOGGLE EQU (0x3:SHL:16) ;- (TC) Effect: toggle -AT91C_TC_ACPC EQU (0x3:SHL:18) ;- (TC) RC Compare Effect on TIOA -AT91C_TC_ACPC_NONE EQU (0x0:SHL:18) ;- (TC) Effect: none -AT91C_TC_ACPC_SET EQU (0x1:SHL:18) ;- (TC) Effect: set -AT91C_TC_ACPC_CLEAR EQU (0x2:SHL:18) ;- (TC) Effect: clear -AT91C_TC_ACPC_TOGGLE EQU (0x3:SHL:18) ;- (TC) Effect: toggle -AT91C_TC_AEEVT EQU (0x3:SHL:20) ;- (TC) External Event Effect on TIOA -AT91C_TC_AEEVT_NONE EQU (0x0:SHL:20) ;- (TC) Effect: none -AT91C_TC_AEEVT_SET EQU (0x1:SHL:20) ;- (TC) Effect: set -AT91C_TC_AEEVT_CLEAR EQU (0x2:SHL:20) ;- (TC) Effect: clear -AT91C_TC_AEEVT_TOGGLE EQU (0x3:SHL:20) ;- (TC) Effect: toggle -AT91C_TC_ASWTRG EQU (0x3:SHL:22) ;- (TC) Software Trigger Effect on TIOA -AT91C_TC_ASWTRG_NONE EQU (0x0:SHL:22) ;- (TC) Effect: none -AT91C_TC_ASWTRG_SET EQU (0x1:SHL:22) ;- (TC) Effect: set -AT91C_TC_ASWTRG_CLEAR EQU (0x2:SHL:22) ;- (TC) Effect: clear -AT91C_TC_ASWTRG_TOGGLE EQU (0x3:SHL:22) ;- (TC) Effect: toggle -AT91C_TC_BCPB EQU (0x3:SHL:24) ;- (TC) RB Compare Effect on TIOB -AT91C_TC_BCPB_NONE EQU (0x0:SHL:24) ;- (TC) Effect: none -AT91C_TC_BCPB_SET EQU (0x1:SHL:24) ;- (TC) Effect: set -AT91C_TC_BCPB_CLEAR EQU (0x2:SHL:24) ;- (TC) Effect: clear -AT91C_TC_BCPB_TOGGLE EQU (0x3:SHL:24) ;- (TC) Effect: toggle -AT91C_TC_BCPC EQU (0x3:SHL:26) ;- (TC) RC Compare Effect on TIOB -AT91C_TC_BCPC_NONE EQU (0x0:SHL:26) ;- (TC) Effect: none -AT91C_TC_BCPC_SET EQU (0x1:SHL:26) ;- (TC) Effect: set -AT91C_TC_BCPC_CLEAR EQU (0x2:SHL:26) ;- (TC) Effect: clear -AT91C_TC_BCPC_TOGGLE EQU (0x3:SHL:26) ;- (TC) Effect: toggle -AT91C_TC_BEEVT EQU (0x3:SHL:28) ;- (TC) External Event Effect on TIOB -AT91C_TC_BEEVT_NONE EQU (0x0:SHL:28) ;- (TC) Effect: none -AT91C_TC_BEEVT_SET EQU (0x1:SHL:28) ;- (TC) Effect: set -AT91C_TC_BEEVT_CLEAR EQU (0x2:SHL:28) ;- (TC) Effect: clear -AT91C_TC_BEEVT_TOGGLE EQU (0x3:SHL:28) ;- (TC) Effect: toggle -AT91C_TC_BSWTRG EQU (0x3:SHL:30) ;- (TC) Software Trigger Effect on TIOB -AT91C_TC_BSWTRG_NONE EQU (0x0:SHL:30) ;- (TC) Effect: none -AT91C_TC_BSWTRG_SET EQU (0x1:SHL:30) ;- (TC) Effect: set -AT91C_TC_BSWTRG_CLEAR EQU (0x2:SHL:30) ;- (TC) Effect: clear -AT91C_TC_BSWTRG_TOGGLE EQU (0x3:SHL:30) ;- (TC) Effect: toggle -;- -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- -AT91C_TC_COVFS EQU (0x1:SHL:0) ;- (TC) Counter Overflow -AT91C_TC_LOVRS EQU (0x1:SHL:1) ;- (TC) Load Overrun -AT91C_TC_CPAS EQU (0x1:SHL:2) ;- (TC) RA Compare -AT91C_TC_CPBS EQU (0x1:SHL:3) ;- (TC) RB Compare -AT91C_TC_CPCS EQU (0x1:SHL:4) ;- (TC) RC Compare -AT91C_TC_LDRAS EQU (0x1:SHL:5) ;- (TC) RA Loading -AT91C_TC_LDRBS EQU (0x1:SHL:6) ;- (TC) RB Loading -AT91C_TC_ETRCS EQU (0x1:SHL:7) ;- (TC) External Trigger -AT91C_TC_ETRGS EQU (0x1:SHL:16) ;- (TC) Clock Enabling -AT91C_TC_MTIOA EQU (0x1:SHL:17) ;- (TC) TIOA Mirror -AT91C_TC_MTIOB EQU (0x1:SHL:18) ;- (TC) TIOA Mirror -;- -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- -;- -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- -;- -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Timer Counter Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_TCB -TCB_TC0 # 48 ;- TC Channel 0 - # 16 ;- Reserved -TCB_TC1 # 48 ;- TC Channel 1 - # 16 ;- Reserved -TCB_TC2 # 48 ;- TC Channel 2 - # 16 ;- Reserved -TCB_BCR # 4 ;- TC Block Control Register -TCB_BMR # 4 ;- TC Block Mode Register -;- -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- -AT91C_TCB_SYNC EQU (0x1:SHL:0) ;- (TCB) Synchro Command -;- -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- -AT91C_TCB_TC0XC0S EQU (0x1:SHL:0) ;- (TCB) External Clock Signal 0 Selection -AT91C_TCB_TC0XC0S_TCLK0 EQU (0x0) ;- (TCB) TCLK0 connected to XC0 -AT91C_TCB_TC0XC0S_NONE EQU (0x1) ;- (TCB) None signal connected to XC0 -AT91C_TCB_TC0XC0S_TIOA1 EQU (0x2) ;- (TCB) TIOA1 connected to XC0 -AT91C_TCB_TC0XC0S_TIOA2 EQU (0x3) ;- (TCB) TIOA2 connected to XC0 -AT91C_TCB_TC1XC1S EQU (0x1:SHL:2) ;- (TCB) External Clock Signal 1 Selection -AT91C_TCB_TC1XC1S_TCLK1 EQU (0x0:SHL:2) ;- (TCB) TCLK1 connected to XC1 -AT91C_TCB_TC1XC1S_NONE EQU (0x1:SHL:2) ;- (TCB) None signal connected to XC1 -AT91C_TCB_TC1XC1S_TIOA0 EQU (0x2:SHL:2) ;- (TCB) TIOA0 connected to XC1 -AT91C_TCB_TC1XC1S_TIOA2 EQU (0x3:SHL:2) ;- (TCB) TIOA2 connected to XC1 -AT91C_TCB_TC2XC2S EQU (0x1:SHL:4) ;- (TCB) External Clock Signal 2 Selection -AT91C_TCB_TC2XC2S_TCLK2 EQU (0x0:SHL:4) ;- (TCB) TCLK2 connected to XC2 -AT91C_TCB_TC2XC2S_NONE EQU (0x1:SHL:4) ;- (TCB) None signal connected to XC2 -AT91C_TCB_TC2XC2S_TIOA0 EQU (0x2:SHL:4) ;- (TCB) TIOA0 connected to XC2 -AT91C_TCB_TC2XC2S_TIOA2 EQU (0x3:SHL:4) ;- (TCB) TIOA2 connected to XC2 - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR USB Host Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_UHP -UHP_HcRevision # 4 ;- Revision -UHP_HcControl # 4 ;- Operating modes for the Host Controller -UHP_HcCommandStatus # 4 ;- Command & status Register -UHP_HcInterruptStatus # 4 ;- Interrupt Status Register -UHP_HcInterruptEnable # 4 ;- Interrupt Enable Register -UHP_HcInterruptDisable # 4 ;- Interrupt Disable Register -UHP_HcHCCA # 4 ;- Pointer to the Host Controller Communication Area -UHP_HcPeriodCurrentED # 4 ;- Current Isochronous or Interrupt Endpoint Descriptor -UHP_HcControlHeadED # 4 ;- First Endpoint Descriptor of the Control list -UHP_HcControlCurrentED # 4 ;- Endpoint Control and Status Register -UHP_HcBulkHeadED # 4 ;- First endpoint register of the Bulk list -UHP_HcBulkCurrentED # 4 ;- Current endpoint of the Bulk list -UHP_HcBulkDoneHead # 4 ;- Last completed transfer descriptor -UHP_HcFmInterval # 4 ;- Bit time between 2 consecutive SOFs -UHP_HcFmRemaining # 4 ;- Bit time remaining in the current Frame -UHP_HcFmNumber # 4 ;- Frame number -UHP_HcPeriodicStart # 4 ;- Periodic Start -UHP_HcLSThreshold # 4 ;- LS Threshold -UHP_HcRhDescriptorA # 4 ;- Root Hub characteristics A -UHP_HcRhDescriptorB # 4 ;- Root Hub characteristics B -UHP_HcRhStatus # 4 ;- Root Hub Status register -UHP_HcRhPortStatus # 8 ;- Root Hub Port Status Register - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Ethernet MAC -;- ***************************************************************************** - ^ 0 ;- AT91S_EMAC -EMAC_CTL # 4 ;- Network Control Register -EMAC_CFG # 4 ;- Network Configuration Register -EMAC_SR # 4 ;- Network Status Register -EMAC_TAR # 4 ;- Transmit Address Register -EMAC_TCR # 4 ;- Transmit Control Register -EMAC_TSR # 4 ;- Transmit Status Register -EMAC_RBQP # 4 ;- Receive Buffer Queue Pointer - # 4 ;- Reserved -EMAC_RSR # 4 ;- Receive Status Register -EMAC_ISR # 4 ;- Interrupt Status Register -EMAC_IER # 4 ;- Interrupt Enable Register -EMAC_IDR # 4 ;- Interrupt Disable Register -EMAC_IMR # 4 ;- Interrupt Mask Register -EMAC_MAN # 4 ;- PHY Maintenance Register - # 8 ;- Reserved -EMAC_FRA # 4 ;- Frames Transmitted OK Register -EMAC_SCOL # 4 ;- Single Collision Frame Register -EMAC_MCOL # 4 ;- Multiple Collision Frame Register -EMAC_OK # 4 ;- Frames Received OK Register -EMAC_SEQE # 4 ;- Frame Check Sequence Error Register -EMAC_ALE # 4 ;- Alignment Error Register -EMAC_DTE # 4 ;- Deferred Transmission Frame Register -EMAC_LCOL # 4 ;- Late Collision Register -EMAC_ECOL # 4 ;- Excessive Collision Register -EMAC_CSE # 4 ;- Carrier Sense Error Register -EMAC_TUE # 4 ;- Transmit Underrun Error Register -EMAC_CDE # 4 ;- Code Error Register -EMAC_ELR # 4 ;- Excessive Length Error Register -EMAC_RJB # 4 ;- Receive Jabber Register -EMAC_USF # 4 ;- Undersize Frame Register -EMAC_SQEE # 4 ;- SQE Test Error Register -EMAC_DRFC # 4 ;- Discarded RX Frame Register - # 12 ;- Reserved -EMAC_HSH # 4 ;- Hash Address High[63:32] -EMAC_HSL # 4 ;- Hash Address Low[31:0] -EMAC_SA1L # 4 ;- Specific Address 1 Low, First 4 bytes -EMAC_SA1H # 4 ;- Specific Address 1 High, Last 2 bytes -EMAC_SA2L # 4 ;- Specific Address 2 Low, First 4 bytes -EMAC_SA2H # 4 ;- Specific Address 2 High, Last 2 bytes -EMAC_SA3L # 4 ;- Specific Address 3 Low, First 4 bytes -EMAC_SA3H # 4 ;- Specific Address 3 High, Last 2 bytes -EMAC_SA4L # 4 ;- Specific Address 4 Low, First 4 bytes -EMAC_SA4H # 4 ;- Specific Address 4 High, Last 2 bytesr -;- -------- EMAC_CTL : (EMAC Offset: 0x0) -------- -AT91C_EMAC_LB EQU (0x1:SHL:0) ;- (EMAC) Loopback. Optional. When set, loopback signal is at high level. -AT91C_EMAC_LBL EQU (0x1:SHL:1) ;- (EMAC) Loopback local. -AT91C_EMAC_RE EQU (0x1:SHL:2) ;- (EMAC) Receive enable. -AT91C_EMAC_TE EQU (0x1:SHL:3) ;- (EMAC) Transmit enable. -AT91C_EMAC_MPE EQU (0x1:SHL:4) ;- (EMAC) Management port enable. -AT91C_EMAC_CSR EQU (0x1:SHL:5) ;- (EMAC) Clear statistics registers. -AT91C_EMAC_ISR EQU (0x1:SHL:6) ;- (EMAC) Increment statistics registers. -AT91C_EMAC_WES EQU (0x1:SHL:7) ;- (EMAC) Write enable for statistics registers. -AT91C_EMAC_BP EQU (0x1:SHL:8) ;- (EMAC) Back pressure. -;- -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- -AT91C_EMAC_SPD EQU (0x1:SHL:0) ;- (EMAC) Speed. -AT91C_EMAC_FD EQU (0x1:SHL:1) ;- (EMAC) Full duplex. -AT91C_EMAC_BR EQU (0x1:SHL:2) ;- (EMAC) Bit rate. -AT91C_EMAC_CAF EQU (0x1:SHL:4) ;- (EMAC) Copy all frames. -AT91C_EMAC_NBC EQU (0x1:SHL:5) ;- (EMAC) No broadcast. -AT91C_EMAC_MTI EQU (0x1:SHL:6) ;- (EMAC) Multicast hash enable -AT91C_EMAC_UNI EQU (0x1:SHL:7) ;- (EMAC) Unicast hash enable. -AT91C_EMAC_BIG EQU (0x1:SHL:8) ;- (EMAC) Receive 1522 bytes. -AT91C_EMAC_EAE EQU (0x1:SHL:9) ;- (EMAC) External address match enable. -AT91C_EMAC_CLK EQU (0x3:SHL:10) ;- (EMAC) -AT91C_EMAC_CLK_HCLK_8 EQU (0x0:SHL:10) ;- (EMAC) HCLK divided by 8 -AT91C_EMAC_CLK_HCLK_16 EQU (0x1:SHL:10) ;- (EMAC) HCLK divided by 16 -AT91C_EMAC_CLK_HCLK_32 EQU (0x2:SHL:10) ;- (EMAC) HCLK divided by 32 -AT91C_EMAC_CLK_HCLK_64 EQU (0x3:SHL:10) ;- (EMAC) HCLK divided by 64 -AT91C_EMAC_RTY EQU (0x1:SHL:12) ;- (EMAC) -AT91C_EMAC_RMII EQU (0x1:SHL:13) ;- (EMAC) -;- -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- -AT91C_EMAC_MDIO EQU (0x1:SHL:1) ;- (EMAC) -AT91C_EMAC_IDLE EQU (0x1:SHL:2) ;- (EMAC) -;- -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- -AT91C_EMAC_LEN EQU (0x7FF:SHL:0) ;- (EMAC) -AT91C_EMAC_NCRC EQU (0x1:SHL:15) ;- (EMAC) -;- -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- -AT91C_EMAC_OVR EQU (0x1:SHL:0) ;- (EMAC) -AT91C_EMAC_COL EQU (0x1:SHL:1) ;- (EMAC) -AT91C_EMAC_RLE EQU (0x1:SHL:2) ;- (EMAC) -AT91C_EMAC_TXIDLE EQU (0x1:SHL:3) ;- (EMAC) -AT91C_EMAC_BNQ EQU (0x1:SHL:4) ;- (EMAC) -AT91C_EMAC_COMP EQU (0x1:SHL:5) ;- (EMAC) -AT91C_EMAC_UND EQU (0x1:SHL:6) ;- (EMAC) -;- -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- -AT91C_EMAC_BNA EQU (0x1:SHL:0) ;- (EMAC) -AT91C_EMAC_REC EQU (0x1:SHL:1) ;- (EMAC) -;- -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- -AT91C_EMAC_DONE EQU (0x1:SHL:0) ;- (EMAC) -AT91C_EMAC_RCOM EQU (0x1:SHL:1) ;- (EMAC) -AT91C_EMAC_RBNA EQU (0x1:SHL:2) ;- (EMAC) -AT91C_EMAC_TOVR EQU (0x1:SHL:3) ;- (EMAC) -AT91C_EMAC_TUND EQU (0x1:SHL:4) ;- (EMAC) -AT91C_EMAC_RTRY EQU (0x1:SHL:5) ;- (EMAC) -AT91C_EMAC_TBRE EQU (0x1:SHL:6) ;- (EMAC) -AT91C_EMAC_TCOM EQU (0x1:SHL:7) ;- (EMAC) -AT91C_EMAC_TIDLE EQU (0x1:SHL:8) ;- (EMAC) -AT91C_EMAC_LINK EQU (0x1:SHL:9) ;- (EMAC) -AT91C_EMAC_ROVR EQU (0x1:SHL:10) ;- (EMAC) -AT91C_EMAC_HRESP EQU (0x1:SHL:11) ;- (EMAC) -;- -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- -;- -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- -;- -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- -;- -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- -AT91C_EMAC_DATA EQU (0xFFFF:SHL:0) ;- (EMAC) -AT91C_EMAC_CODE EQU (0x3:SHL:16) ;- (EMAC) -AT91C_EMAC_REGA EQU (0x1F:SHL:18) ;- (EMAC) -AT91C_EMAC_PHYA EQU (0x1F:SHL:23) ;- (EMAC) -AT91C_EMAC_RW EQU (0x3:SHL:28) ;- (EMAC) -AT91C_EMAC_HIGH EQU (0x1:SHL:30) ;- (EMAC) -AT91C_EMAC_LOW EQU (0x1:SHL:31) ;- (EMAC) - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR External Bus Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_EBI -EBI_CSA # 4 ;- Chip Select Assignment Register -EBI_CFGR # 4 ;- Configuration Register -;- -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- -AT91C_EBI_CS0A EQU (0x1:SHL:0) ;- (EBI) Chip Select 0 Assignment -AT91C_EBI_CS0A_SMC EQU (0x0) ;- (EBI) Chip Select 0 is assigned to the Static Memory Controller. -AT91C_EBI_CS0A_BFC EQU (0x1) ;- (EBI) Chip Select 0 is assigned to the Burst Flash Controller. -AT91C_EBI_CS1A EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 Assignment -AT91C_EBI_CS1A_SMC EQU (0x0:SHL:1) ;- (EBI) Chip Select 1 is assigned to the Static Memory Controller. -AT91C_EBI_CS1A_SDRAMC EQU (0x1:SHL:1) ;- (EBI) Chip Select 1 is assigned to the SDRAM Controller. -AT91C_EBI_CS3A EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 Assignment -AT91C_EBI_CS3A_SMC EQU (0x0:SHL:3) ;- (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. -AT91C_EBI_CS3A_SMC_SmartMedia EQU (0x1:SHL:3) ;- (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. -AT91C_EBI_CS4A EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 Assignment -AT91C_EBI_CS4A_SMC EQU (0x0:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. -AT91C_EBI_CS4A_SMC_CompactFlash EQU (0x1:SHL:4) ;- (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. -;- -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- -AT91C_EBI_DBPUC EQU (0x1:SHL:0) ;- (EBI) Data Bus Pull-Up Configuration -AT91C_EBI_EBSEN EQU (0x1:SHL:1) ;- (EBI) Bus Sharing Enable - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SMC2 -SMC2_CSR # 32 ;- SMC2 Chip Select Register -;- -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- -AT91C_SMC2_NWS EQU (0x7F:SHL:0) ;- (SMC2) Number of Wait States -AT91C_SMC2_WSEN EQU (0x1:SHL:7) ;- (SMC2) Wait State Enable -AT91C_SMC2_TDF EQU (0xF:SHL:8) ;- (SMC2) Data Float Time -AT91C_SMC2_BAT EQU (0x1:SHL:12) ;- (SMC2) Byte Access Type -AT91C_SMC2_DBW EQU (0x1:SHL:13) ;- (SMC2) Data Bus Width -AT91C_SMC2_DBW_16 EQU (0x1:SHL:13) ;- (SMC2) 16-bit. -AT91C_SMC2_DBW_8 EQU (0x2:SHL:13) ;- (SMC2) 8-bit. -AT91C_SMC2_DRP EQU (0x1:SHL:15) ;- (SMC2) Data Read Protocol -AT91C_SMC2_ACSS EQU (0x3:SHL:16) ;- (SMC2) Address to Chip Select Setup -AT91C_SMC2_ACSS_STANDARD EQU (0x0:SHL:16) ;- (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. -AT91C_SMC2_ACSS_1_CYCLE EQU (0x1:SHL:16) ;- (SMC2) One cycle less at the beginning and the end of the access. -AT91C_SMC2_ACSS_2_CYCLES EQU (0x2:SHL:16) ;- (SMC2) Two cycles less at the beginning and the end of the access. -AT91C_SMC2_ACSS_3_CYCLES EQU (0x3:SHL:16) ;- (SMC2) Three cycles less at the beginning and the end of the access. -AT91C_SMC2_RWSETUP EQU (0x7:SHL:24) ;- (SMC2) Read and Write Signal Setup Time -AT91C_SMC2_RWHOLD EQU (0x7:SHL:29) ;- (SMC2) Read and Write Signal Hold Time - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR SDRAM Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_SDRC -SDRC_MR # 4 ;- SDRAM Controller Mode Register -SDRC_TR # 4 ;- SDRAM Controller Refresh Timer Register -SDRC_CR # 4 ;- SDRAM Controller Configuration Register -SDRC_SRR # 4 ;- SDRAM Controller Self Refresh Register -SDRC_LPR # 4 ;- SDRAM Controller Low Power Register -SDRC_IER # 4 ;- SDRAM Controller Interrupt Enable Register -SDRC_IDR # 4 ;- SDRAM Controller Interrupt Disable Register -SDRC_IMR # 4 ;- SDRAM Controller Interrupt Mask Register -SDRC_ISR # 4 ;- SDRAM Controller Interrupt Mask Register -;- -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- -AT91C_SDRC_MODE EQU (0xF:SHL:0) ;- (SDRC) Mode -AT91C_SDRC_MODE_NORMAL_CMD EQU (0x0) ;- (SDRC) Normal Mode -AT91C_SDRC_MODE_NOP_CMD EQU (0x1) ;- (SDRC) NOP Command -AT91C_SDRC_MODE_PRCGALL_CMD EQU (0x2) ;- (SDRC) All Banks Precharge Command -AT91C_SDRC_MODE_LMR_CMD EQU (0x3) ;- (SDRC) Load Mode Register Command -AT91C_SDRC_MODE_RFSH_CMD EQU (0x4) ;- (SDRC) Refresh Command -AT91C_SDRC_DBW EQU (0x1:SHL:4) ;- (SDRC) Data Bus Width -AT91C_SDRC_DBW_32_BITS EQU (0x0:SHL:4) ;- (SDRC) 32 Bits datas bus -AT91C_SDRC_DBW_16_BITS EQU (0x1:SHL:4) ;- (SDRC) 16 Bits datas bus -;- -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- -AT91C_SDRC_COUNT EQU (0xFFF:SHL:0) ;- (SDRC) Refresh Counter -;- -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- -AT91C_SDRC_NC EQU (0x3:SHL:0) ;- (SDRC) Number of Column Bits -AT91C_SDRC_NC_8 EQU (0x0) ;- (SDRC) 8 Bits -AT91C_SDRC_NC_9 EQU (0x1) ;- (SDRC) 9 Bits -AT91C_SDRC_NC_10 EQU (0x2) ;- (SDRC) 10 Bits -AT91C_SDRC_NC_11 EQU (0x3) ;- (SDRC) 11 Bits -AT91C_SDRC_NR EQU (0x3:SHL:2) ;- (SDRC) Number of Row Bits -AT91C_SDRC_NR_11 EQU (0x0:SHL:2) ;- (SDRC) 11 Bits -AT91C_SDRC_NR_12 EQU (0x1:SHL:2) ;- (SDRC) 12 Bits -AT91C_SDRC_NR_13 EQU (0x2:SHL:2) ;- (SDRC) 13 Bits -AT91C_SDRC_NB EQU (0x1:SHL:4) ;- (SDRC) Number of Banks -AT91C_SDRC_NB_2_BANKS EQU (0x0:SHL:4) ;- (SDRC) 2 banks -AT91C_SDRC_NB_4_BANKS EQU (0x1:SHL:4) ;- (SDRC) 4 banks -AT91C_SDRC_CAS EQU (0x3:SHL:5) ;- (SDRC) CAS Latency -AT91C_SDRC_CAS_2 EQU (0x2:SHL:5) ;- (SDRC) 2 cycles -AT91C_SDRC_TWR EQU (0xF:SHL:7) ;- (SDRC) Number of Write Recovery Time Cycles -AT91C_SDRC_TRC EQU (0xF:SHL:11) ;- (SDRC) Number of RAS Cycle Time Cycles -AT91C_SDRC_TRP EQU (0xF:SHL:15) ;- (SDRC) Number of RAS Precharge Time Cycles -AT91C_SDRC_TRCD EQU (0xF:SHL:19) ;- (SDRC) Number of RAS to CAS Delay Cycles -AT91C_SDRC_TRAS EQU (0xF:SHL:23) ;- (SDRC) Number of RAS Active Time Cycles -AT91C_SDRC_TXSR EQU (0xF:SHL:27) ;- (SDRC) Number of Command Recovery Time Cycles -;- -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- -AT91C_SDRC_SRCB EQU (0x1:SHL:0) ;- (SDRC) Self-refresh Command Bit -;- -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- -AT91C_SDRC_LPCB EQU (0x1:SHL:0) ;- (SDRC) Low-power Command Bit -;- -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- -AT91C_SDRC_RES EQU (0x1:SHL:0) ;- (SDRC) Refresh Error Status -;- -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- -;- -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- -;- -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- - -;- ***************************************************************************** -;- SOFTWARE API DEFINITION FOR Burst Flash Controller Interface -;- ***************************************************************************** - ^ 0 ;- AT91S_BFC -BFC_MR # 4 ;- BFC Mode Register -;- -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- -AT91C_BFC_BFCOM EQU (0x3:SHL:0) ;- (BFC) Burst Flash Controller Operating Mode -AT91C_BFC_BFCOM_DISABLED EQU (0x0) ;- (BFC) NPCS0 is driven by the SMC or remains high. -AT91C_BFC_BFCOM_ASYNC EQU (0x1) ;- (BFC) Asynchronous -AT91C_BFC_BFCOM_BURST_READ EQU (0x2) ;- (BFC) Burst Read -AT91C_BFC_BFCC EQU (0x3:SHL:2) ;- (BFC) Burst Flash Controller Operating Mode -AT91C_BFC_BFCC_MCK EQU (0x1:SHL:2) ;- (BFC) Master Clock. -AT91C_BFC_BFCC_MCK_DIV_2 EQU (0x2:SHL:2) ;- (BFC) Master Clock divided by 2. -AT91C_BFC_BFCC_MCK_DIV_4 EQU (0x3:SHL:2) ;- (BFC) Master Clock divided by 4. -AT91C_BFC_AVL EQU (0xF:SHL:4) ;- (BFC) Address Valid Latency -AT91C_BFC_PAGES EQU (0x7:SHL:8) ;- (BFC) Page Size -AT91C_BFC_PAGES_NO_PAGE EQU (0x0:SHL:8) ;- (BFC) No page handling. -AT91C_BFC_PAGES_16 EQU (0x1:SHL:8) ;- (BFC) 16 bytes page size. -AT91C_BFC_PAGES_32 EQU (0x2:SHL:8) ;- (BFC) 32 bytes page size. -AT91C_BFC_PAGES_64 EQU (0x3:SHL:8) ;- (BFC) 64 bytes page size. -AT91C_BFC_PAGES_128 EQU (0x4:SHL:8) ;- (BFC) 128 bytes page size. -AT91C_BFC_PAGES_256 EQU (0x5:SHL:8) ;- (BFC) 256 bytes page size. -AT91C_BFC_PAGES_512 EQU (0x6:SHL:8) ;- (BFC) 512 bytes page size. -AT91C_BFC_PAGES_1024 EQU (0x7:SHL:8) ;- (BFC) 1024 bytes page size. -AT91C_BFC_OEL EQU (0x3:SHL:12) ;- (BFC) Output Enable Latency -AT91C_BFC_BAAEN EQU (0x1:SHL:16) ;- (BFC) Burst Address Advance Enable -AT91C_BFC_BFOEH EQU (0x1:SHL:17) ;- (BFC) Burst Flash Output Enable Handling -AT91C_BFC_MUXEN EQU (0x1:SHL:18) ;- (BFC) Multiplexed Bus Enable -AT91C_BFC_RDYEN EQU (0x1:SHL:19) ;- (BFC) Ready Enable Mode - -;- ***************************************************************************** -;- REGISTER ADDRESS DEFINITION FOR AT91RM9200 -;- ***************************************************************************** -;- ========== Register definition for SYS peripheral ========== -;- ========== Register definition for MC peripheral ========== -AT91C_MC_PUER EQU (0xFFFFFF54) ;- (MC) MC Protection Unit Enable Register -AT91C_MC_ASR EQU (0xFFFFFF04) ;- (MC) MC Abort Status Register -AT91C_MC_PUP EQU (0xFFFFFF50) ;- (MC) MC Protection Unit Peripherals -AT91C_MC_PUIA EQU (0xFFFFFF10) ;- (MC) MC Protection Unit Area -AT91C_MC_AASR EQU (0xFFFFFF08) ;- (MC) MC Abort Address Status Register -AT91C_MC_RCR EQU (0xFFFFFF00) ;- (MC) MC Remap Control Register -;- ========== Register definition for RTC peripheral ========== -AT91C_RTC_IMR EQU (0xFFFFFE28) ;- (RTC) Interrupt Mask Register -AT91C_RTC_IER EQU (0xFFFFFE20) ;- (RTC) Interrupt Enable Register -AT91C_RTC_SR EQU (0xFFFFFE18) ;- (RTC) Status Register -AT91C_RTC_TIMALR EQU (0xFFFFFE10) ;- (RTC) Time Alarm Register -AT91C_RTC_TIMR EQU (0xFFFFFE08) ;- (RTC) Time Register -AT91C_RTC_CR EQU (0xFFFFFE00) ;- (RTC) Control Register -AT91C_RTC_VER EQU (0xFFFFFE2C) ;- (RTC) Valid Entry Register -AT91C_RTC_IDR EQU (0xFFFFFE24) ;- (RTC) Interrupt Disable Register -AT91C_RTC_SCCR EQU (0xFFFFFE1C) ;- (RTC) Status Clear Command Register -AT91C_RTC_CALALR EQU (0xFFFFFE14) ;- (RTC) Calendar Alarm Register -AT91C_RTC_CALR EQU (0xFFFFFE0C) ;- (RTC) Calendar Register -AT91C_RTC_MR EQU (0xFFFFFE04) ;- (RTC) Mode Register -;- ========== Register definition for ST peripheral ========== -AT91C_ST_CRTR EQU (0xFFFFFD24) ;- (ST) Current Real-time Register -AT91C_ST_IMR EQU (0xFFFFFD1C) ;- (ST) Interrupt Mask Register -AT91C_ST_IER EQU (0xFFFFFD14) ;- (ST) Interrupt Enable Register -AT91C_ST_RTMR EQU (0xFFFFFD0C) ;- (ST) Real-time Mode Register -AT91C_ST_PIMR EQU (0xFFFFFD04) ;- (ST) Period Interval Mode Register -AT91C_ST_RTAR EQU (0xFFFFFD20) ;- (ST) Real-time Alarm Register -AT91C_ST_IDR EQU (0xFFFFFD18) ;- (ST) Interrupt Disable Register -AT91C_ST_SR EQU (0xFFFFFD10) ;- (ST) Status Register -AT91C_ST_WDMR EQU (0xFFFFFD08) ;- (ST) Watchdog Mode Register -AT91C_ST_CR EQU (0xFFFFFD00) ;- (ST) Control Register -;- ========== Register definition for PMC peripheral ========== -AT91C_PMC_SCSR EQU (0xFFFFFC08) ;- (PMC) System Clock Status Register -AT91C_PMC_SCER EQU (0xFFFFFC00) ;- (PMC) System Clock Enable Register -AT91C_PMC_IMR EQU (0xFFFFFC6C) ;- (PMC) Interrupt Mask Register -AT91C_PMC_IDR EQU (0xFFFFFC64) ;- (PMC) Interrupt Disable Register -AT91C_PMC_PCDR EQU (0xFFFFFC14) ;- (PMC) Peripheral Clock Disable Register -AT91C_PMC_SCDR EQU (0xFFFFFC04) ;- (PMC) System Clock Disable Register -AT91C_PMC_SR EQU (0xFFFFFC68) ;- (PMC) Status Register -AT91C_PMC_IER EQU (0xFFFFFC60) ;- (PMC) Interrupt Enable Register -AT91C_PMC_MCKR EQU (0xFFFFFC30) ;- (PMC) Master Clock Register -AT91C_PMC_PCER EQU (0xFFFFFC10) ;- (PMC) Peripheral Clock Enable Register -AT91C_PMC_PCSR EQU (0xFFFFFC18) ;- (PMC) Peripheral Clock Status Register -AT91C_PMC_PCKR EQU (0xFFFFFC40) ;- (PMC) Programmable Clock Register -;- ========== Register definition for CKGR peripheral ========== -AT91C_CKGR_PLLBR EQU (0xFFFFFC2C) ;- (CKGR) PLL B Register -AT91C_CKGR_MCFR EQU (0xFFFFFC24) ;- (CKGR) Main Clock Frequency Register -AT91C_CKGR_PLLAR EQU (0xFFFFFC28) ;- (CKGR) PLL A Register -AT91C_CKGR_MOR EQU (0xFFFFFC20) ;- (CKGR) Main Oscillator Register -;- ========== Register definition for PIOD peripheral ========== -AT91C_PIOD_PDSR EQU (0xFFFFFA3C) ;- (PIOD) Pin Data Status Register -AT91C_PIOD_CODR EQU (0xFFFFFA34) ;- (PIOD) Clear Output Data Register -AT91C_PIOD_OWER EQU (0xFFFFFAA0) ;- (PIOD) Output Write Enable Register -AT91C_PIOD_MDER EQU (0xFFFFFA50) ;- (PIOD) Multi-driver Enable Register -AT91C_PIOD_IMR EQU (0xFFFFFA48) ;- (PIOD) Interrupt Mask Register -AT91C_PIOD_IER EQU (0xFFFFFA40) ;- (PIOD) Interrupt Enable Register -AT91C_PIOD_ODSR EQU (0xFFFFFA38) ;- (PIOD) Output Data Status Register -AT91C_PIOD_SODR EQU (0xFFFFFA30) ;- (PIOD) Set Output Data Register -AT91C_PIOD_PER EQU (0xFFFFFA00) ;- (PIOD) PIO Enable Register -AT91C_PIOD_OWDR EQU (0xFFFFFAA4) ;- (PIOD) Output Write Disable Register -AT91C_PIOD_PPUER EQU (0xFFFFFA64) ;- (PIOD) Pull-up Enable Register -AT91C_PIOD_MDDR EQU (0xFFFFFA54) ;- (PIOD) Multi-driver Disable Register -AT91C_PIOD_ISR EQU (0xFFFFFA4C) ;- (PIOD) Interrupt Status Register -AT91C_PIOD_IDR EQU (0xFFFFFA44) ;- (PIOD) Interrupt Disable Register -AT91C_PIOD_PDR EQU (0xFFFFFA04) ;- (PIOD) PIO Disable Register -AT91C_PIOD_ODR EQU (0xFFFFFA14) ;- (PIOD) Output Disable Registerr -AT91C_PIOD_OWSR EQU (0xFFFFFAA8) ;- (PIOD) Output Write Status Register -AT91C_PIOD_ABSR EQU (0xFFFFFA78) ;- (PIOD) AB Select Status Register -AT91C_PIOD_ASR EQU (0xFFFFFA70) ;- (PIOD) Select A Register -AT91C_PIOD_PPUSR EQU (0xFFFFFA68) ;- (PIOD) Pad Pull-up Status Register -AT91C_PIOD_PPUDR EQU (0xFFFFFA60) ;- (PIOD) Pull-up Disable Register -AT91C_PIOD_MDSR EQU (0xFFFFFA58) ;- (PIOD) Multi-driver Status Register -AT91C_PIOD_PSR EQU (0xFFFFFA08) ;- (PIOD) PIO Status Register -AT91C_PIOD_OER EQU (0xFFFFFA10) ;- (PIOD) Output Enable Register -AT91C_PIOD_OSR EQU (0xFFFFFA18) ;- (PIOD) Output Status Register -AT91C_PIOD_IFER EQU (0xFFFFFA20) ;- (PIOD) Input Filter Enable Register -AT91C_PIOD_BSR EQU (0xFFFFFA74) ;- (PIOD) Select B Register -AT91C_PIOD_IFDR EQU (0xFFFFFA24) ;- (PIOD) Input Filter Disable Register -AT91C_PIOD_IFSR EQU (0xFFFFFA28) ;- (PIOD) Input Filter Status Register -;- ========== Register definition for PIOC peripheral ========== -AT91C_PIOC_IFDR EQU (0xFFFFF824) ;- (PIOC) Input Filter Disable Register -AT91C_PIOC_ODR EQU (0xFFFFF814) ;- (PIOC) Output Disable Registerr -AT91C_PIOC_ABSR EQU (0xFFFFF878) ;- (PIOC) AB Select Status Register -AT91C_PIOC_SODR EQU (0xFFFFF830) ;- (PIOC) Set Output Data Register -AT91C_PIOC_IFSR EQU (0xFFFFF828) ;- (PIOC) Input Filter Status Register -AT91C_PIOC_CODR EQU (0xFFFFF834) ;- (PIOC) Clear Output Data Register -AT91C_PIOC_ODSR EQU (0xFFFFF838) ;- (PIOC) Output Data Status Register -AT91C_PIOC_IER EQU (0xFFFFF840) ;- (PIOC) Interrupt Enable Register -AT91C_PIOC_IMR EQU (0xFFFFF848) ;- (PIOC) Interrupt Mask Register -AT91C_PIOC_OWDR EQU (0xFFFFF8A4) ;- (PIOC) Output Write Disable Register -AT91C_PIOC_MDDR EQU (0xFFFFF854) ;- (PIOC) Multi-driver Disable Register -AT91C_PIOC_PDSR EQU (0xFFFFF83C) ;- (PIOC) Pin Data Status Register -AT91C_PIOC_IDR EQU (0xFFFFF844) ;- (PIOC) Interrupt Disable Register -AT91C_PIOC_ISR EQU (0xFFFFF84C) ;- (PIOC) Interrupt Status Register -AT91C_PIOC_PDR EQU (0xFFFFF804) ;- (PIOC) PIO Disable Register -AT91C_PIOC_OWSR EQU (0xFFFFF8A8) ;- (PIOC) Output Write Status Register -AT91C_PIOC_OWER EQU (0xFFFFF8A0) ;- (PIOC) Output Write Enable Register -AT91C_PIOC_ASR EQU (0xFFFFF870) ;- (PIOC) Select A Register -AT91C_PIOC_PPUSR EQU (0xFFFFF868) ;- (PIOC) Pad Pull-up Status Register -AT91C_PIOC_PPUDR EQU (0xFFFFF860) ;- (PIOC) Pull-up Disable Register -AT91C_PIOC_MDSR EQU (0xFFFFF858) ;- (PIOC) Multi-driver Status Register -AT91C_PIOC_MDER EQU (0xFFFFF850) ;- (PIOC) Multi-driver Enable Register -AT91C_PIOC_IFER EQU (0xFFFFF820) ;- (PIOC) Input Filter Enable Register -AT91C_PIOC_OSR EQU (0xFFFFF818) ;- (PIOC) Output Status Register -AT91C_PIOC_OER EQU (0xFFFFF810) ;- (PIOC) Output Enable Register -AT91C_PIOC_PSR EQU (0xFFFFF808) ;- (PIOC) PIO Status Register -AT91C_PIOC_PER EQU (0xFFFFF800) ;- (PIOC) PIO Enable Register -AT91C_PIOC_BSR EQU (0xFFFFF874) ;- (PIOC) Select B Register -AT91C_PIOC_PPUER EQU (0xFFFFF864) ;- (PIOC) Pull-up Enable Register -;- ========== Register definition for PIOB peripheral ========== -AT91C_PIOB_OWSR EQU (0xFFFFF6A8) ;- (PIOB) Output Write Status Register -AT91C_PIOB_PPUSR EQU (0xFFFFF668) ;- (PIOB) Pad Pull-up Status Register -AT91C_PIOB_PPUDR EQU (0xFFFFF660) ;- (PIOB) Pull-up Disable Register -AT91C_PIOB_MDSR EQU (0xFFFFF658) ;- (PIOB) Multi-driver Status Register -AT91C_PIOB_MDER EQU (0xFFFFF650) ;- (PIOB) Multi-driver Enable Register -AT91C_PIOB_IMR EQU (0xFFFFF648) ;- (PIOB) Interrupt Mask Register -AT91C_PIOB_OSR EQU (0xFFFFF618) ;- (PIOB) Output Status Register -AT91C_PIOB_OER EQU (0xFFFFF610) ;- (PIOB) Output Enable Register -AT91C_PIOB_PSR EQU (0xFFFFF608) ;- (PIOB) PIO Status Register -AT91C_PIOB_PER EQU (0xFFFFF600) ;- (PIOB) PIO Enable Register -AT91C_PIOB_BSR EQU (0xFFFFF674) ;- (PIOB) Select B Register -AT91C_PIOB_PPUER EQU (0xFFFFF664) ;- (PIOB) Pull-up Enable Register -AT91C_PIOB_IFDR EQU (0xFFFFF624) ;- (PIOB) Input Filter Disable Register -AT91C_PIOB_ODR EQU (0xFFFFF614) ;- (PIOB) Output Disable Registerr -AT91C_PIOB_ABSR EQU (0xFFFFF678) ;- (PIOB) AB Select Status Register -AT91C_PIOB_ASR EQU (0xFFFFF670) ;- (PIOB) Select A Register -AT91C_PIOB_IFER EQU (0xFFFFF620) ;- (PIOB) Input Filter Enable Register -AT91C_PIOB_IFSR EQU (0xFFFFF628) ;- (PIOB) Input Filter Status Register -AT91C_PIOB_SODR EQU (0xFFFFF630) ;- (PIOB) Set Output Data Register -AT91C_PIOB_ODSR EQU (0xFFFFF638) ;- (PIOB) Output Data Status Register -AT91C_PIOB_CODR EQU (0xFFFFF634) ;- (PIOB) Clear Output Data Register -AT91C_PIOB_PDSR EQU (0xFFFFF63C) ;- (PIOB) Pin Data Status Register -AT91C_PIOB_OWER EQU (0xFFFFF6A0) ;- (PIOB) Output Write Enable Register -AT91C_PIOB_IER EQU (0xFFFFF640) ;- (PIOB) Interrupt Enable Register -AT91C_PIOB_OWDR EQU (0xFFFFF6A4) ;- (PIOB) Output Write Disable Register -AT91C_PIOB_MDDR EQU (0xFFFFF654) ;- (PIOB) Multi-driver Disable Register -AT91C_PIOB_ISR EQU (0xFFFFF64C) ;- (PIOB) Interrupt Status Register -AT91C_PIOB_IDR EQU (0xFFFFF644) ;- (PIOB) Interrupt Disable Register -AT91C_PIOB_PDR EQU (0xFFFFF604) ;- (PIOB) PIO Disable Register -;- ========== Register definition for PIOA peripheral ========== -AT91C_PIOA_IMR EQU (0xFFFFF448) ;- (PIOA) Interrupt Mask Register -AT91C_PIOA_IER EQU (0xFFFFF440) ;- (PIOA) Interrupt Enable Register -AT91C_PIOA_OWDR EQU (0xFFFFF4A4) ;- (PIOA) Output Write Disable Register -AT91C_PIOA_ISR EQU (0xFFFFF44C) ;- (PIOA) Interrupt Status Register -AT91C_PIOA_PPUDR EQU (0xFFFFF460) ;- (PIOA) Pull-up Disable Register -AT91C_PIOA_MDSR EQU (0xFFFFF458) ;- (PIOA) Multi-driver Status Register -AT91C_PIOA_MDER EQU (0xFFFFF450) ;- (PIOA) Multi-driver Enable Register -AT91C_PIOA_PER EQU (0xFFFFF400) ;- (PIOA) PIO Enable Register -AT91C_PIOA_PSR EQU (0xFFFFF408) ;- (PIOA) PIO Status Register -AT91C_PIOA_OER EQU (0xFFFFF410) ;- (PIOA) Output Enable Register -AT91C_PIOA_BSR EQU (0xFFFFF474) ;- (PIOA) Select B Register -AT91C_PIOA_PPUER EQU (0xFFFFF464) ;- (PIOA) Pull-up Enable Register -AT91C_PIOA_MDDR EQU (0xFFFFF454) ;- (PIOA) Multi-driver Disable Register -AT91C_PIOA_PDR EQU (0xFFFFF404) ;- (PIOA) PIO Disable Register -AT91C_PIOA_ODR EQU (0xFFFFF414) ;- (PIOA) Output Disable Registerr -AT91C_PIOA_IFDR EQU (0xFFFFF424) ;- (PIOA) Input Filter Disable Register -AT91C_PIOA_ABSR EQU (0xFFFFF478) ;- (PIOA) AB Select Status Register -AT91C_PIOA_ASR EQU (0xFFFFF470) ;- (PIOA) Select A Register -AT91C_PIOA_PPUSR EQU (0xFFFFF468) ;- (PIOA) Pad Pull-up Status Register -AT91C_PIOA_ODSR EQU (0xFFFFF438) ;- (PIOA) Output Data Status Register -AT91C_PIOA_SODR EQU (0xFFFFF430) ;- (PIOA) Set Output Data Register -AT91C_PIOA_IFSR EQU (0xFFFFF428) ;- (PIOA) Input Filter Status Register -AT91C_PIOA_IFER EQU (0xFFFFF420) ;- (PIOA) Input Filter Enable Register -AT91C_PIOA_OSR EQU (0xFFFFF418) ;- (PIOA) Output Status Register -AT91C_PIOA_IDR EQU (0xFFFFF444) ;- (PIOA) Interrupt Disable Register -AT91C_PIOA_PDSR EQU (0xFFFFF43C) ;- (PIOA) Pin Data Status Register -AT91C_PIOA_CODR EQU (0xFFFFF434) ;- (PIOA) Clear Output Data Register -AT91C_PIOA_OWSR EQU (0xFFFFF4A8) ;- (PIOA) Output Write Status Register -AT91C_PIOA_OWER EQU (0xFFFFF4A0) ;- (PIOA) Output Write Enable Register -;- ========== Register definition for DBGU peripheral ========== -AT91C_DBGU_C2R EQU (0xFFFFF244) ;- (DBGU) Chip ID2 Register -AT91C_DBGU_THR EQU (0xFFFFF21C) ;- (DBGU) Transmitter Holding Register -AT91C_DBGU_CSR EQU (0xFFFFF214) ;- (DBGU) Channel Status Register -AT91C_DBGU_IDR EQU (0xFFFFF20C) ;- (DBGU) Interrupt Disable Register -AT91C_DBGU_MR EQU (0xFFFFF204) ;- (DBGU) Mode Register -AT91C_DBGU_FNTR EQU (0xFFFFF248) ;- (DBGU) Force NTRST Register -AT91C_DBGU_C1R EQU (0xFFFFF240) ;- (DBGU) Chip ID1 Register -AT91C_DBGU_BRGR EQU (0xFFFFF220) ;- (DBGU) Baud Rate Generator Register -AT91C_DBGU_RHR EQU (0xFFFFF218) ;- (DBGU) Receiver Holding Register -AT91C_DBGU_IMR EQU (0xFFFFF210) ;- (DBGU) Interrupt Mask Register -AT91C_DBGU_IER EQU (0xFFFFF208) ;- (DBGU) Interrupt Enable Register -AT91C_DBGU_CR EQU (0xFFFFF200) ;- (DBGU) Control Register -;- ========== Register definition for PDC_DBGU peripheral ========== -AT91C_DBGU_TNCR EQU (0xFFFFF31C) ;- (PDC_DBGU) Transmit Next Counter Register -AT91C_DBGU_RNCR EQU (0xFFFFF314) ;- (PDC_DBGU) Receive Next Counter Register -AT91C_DBGU_PTCR EQU (0xFFFFF320) ;- (PDC_DBGU) PDC Transfer Control Register -AT91C_DBGU_PTSR EQU (0xFFFFF324) ;- (PDC_DBGU) PDC Transfer Status Register -AT91C_DBGU_RCR EQU (0xFFFFF304) ;- (PDC_DBGU) Receive Counter Register -AT91C_DBGU_TCR EQU (0xFFFFF30C) ;- (PDC_DBGU) Transmit Counter Register -AT91C_DBGU_RPR EQU (0xFFFFF300) ;- (PDC_DBGU) Receive Pointer Register -AT91C_DBGU_TPR EQU (0xFFFFF308) ;- (PDC_DBGU) Transmit Pointer Register -AT91C_DBGU_RNPR EQU (0xFFFFF310) ;- (PDC_DBGU) Receive Next Pointer Register -AT91C_DBGU_TNPR EQU (0xFFFFF318) ;- (PDC_DBGU) Transmit Next Pointer Register -;- ========== Register definition for AIC peripheral ========== -AT91C_AIC_ICCR EQU (0xFFFFF128) ;- (AIC) Interrupt Clear Command Register -AT91C_AIC_IECR EQU (0xFFFFF120) ;- (AIC) Interrupt Enable Command Register -AT91C_AIC_SMR EQU (0xFFFFF000) ;- (AIC) Source Mode Register -AT91C_AIC_ISCR EQU (0xFFFFF12C) ;- (AIC) Interrupt Set Command Register -AT91C_AIC_EOICR EQU (0xFFFFF130) ;- (AIC) End of Interrupt Command Register -AT91C_AIC_DCR EQU (0xFFFFF138) ;- (AIC) Debug Control Register (Protect) -AT91C_AIC_FFER EQU (0xFFFFF140) ;- (AIC) Fast Forcing Enable Register -AT91C_AIC_SVR EQU (0xFFFFF080) ;- (AIC) Source Vector Register -AT91C_AIC_SPU EQU (0xFFFFF134) ;- (AIC) Spurious Vector Register -AT91C_AIC_FFDR EQU (0xFFFFF144) ;- (AIC) Fast Forcing Disable Register -AT91C_AIC_FVR EQU (0xFFFFF104) ;- (AIC) FIQ Vector Register -AT91C_AIC_FFSR EQU (0xFFFFF148) ;- (AIC) Fast Forcing Status Register -AT91C_AIC_IMR EQU (0xFFFFF110) ;- (AIC) Interrupt Mask Register -AT91C_AIC_ISR EQU (0xFFFFF108) ;- (AIC) Interrupt Status Register -AT91C_AIC_IVR EQU (0xFFFFF100) ;- (AIC) IRQ Vector Register -AT91C_AIC_IDCR EQU (0xFFFFF124) ;- (AIC) Interrupt Disable Command Register -AT91C_AIC_CISR EQU (0xFFFFF114) ;- (AIC) Core Interrupt Status Register -AT91C_AIC_IPR EQU (0xFFFFF10C) ;- (AIC) Interrupt Pending Register -;- ========== Register definition for PDC_SPI peripheral ========== -AT91C_SPI_PTCR EQU (0xFFFE0120) ;- (PDC_SPI) PDC Transfer Control Register -AT91C_SPI_TNPR EQU (0xFFFE0118) ;- (PDC_SPI) Transmit Next Pointer Register -AT91C_SPI_RNPR EQU (0xFFFE0110) ;- (PDC_SPI) Receive Next Pointer Register -AT91C_SPI_TPR EQU (0xFFFE0108) ;- (PDC_SPI) Transmit Pointer Register -AT91C_SPI_RPR EQU (0xFFFE0100) ;- (PDC_SPI) Receive Pointer Register -AT91C_SPI_PTSR EQU (0xFFFE0124) ;- (PDC_SPI) PDC Transfer Status Register -AT91C_SPI_TNCR EQU (0xFFFE011C) ;- (PDC_SPI) Transmit Next Counter Register -AT91C_SPI_RNCR EQU (0xFFFE0114) ;- (PDC_SPI) Receive Next Counter Register -AT91C_SPI_TCR EQU (0xFFFE010C) ;- (PDC_SPI) Transmit Counter Register -AT91C_SPI_RCR EQU (0xFFFE0104) ;- (PDC_SPI) Receive Counter Register -;- ========== Register definition for SPI peripheral ========== -AT91C_SPI_CSR EQU (0xFFFE0030) ;- (SPI) Chip Select Register -AT91C_SPI_IDR EQU (0xFFFE0018) ;- (SPI) Interrupt Disable Register -AT91C_SPI_SR EQU (0xFFFE0010) ;- (SPI) Status Register -AT91C_SPI_RDR EQU (0xFFFE0008) ;- (SPI) Receive Data Register -AT91C_SPI_CR EQU (0xFFFE0000) ;- (SPI) Control Register -AT91C_SPI_IMR EQU (0xFFFE001C) ;- (SPI) Interrupt Mask Register -AT91C_SPI_IER EQU (0xFFFE0014) ;- (SPI) Interrupt Enable Register -AT91C_SPI_TDR EQU (0xFFFE000C) ;- (SPI) Transmit Data Register -AT91C_SPI_MR EQU (0xFFFE0004) ;- (SPI) Mode Register -;- ========== Register definition for PDC_SSC2 peripheral ========== -AT91C_SSC2_PTCR EQU (0xFFFD8120) ;- (PDC_SSC2) PDC Transfer Control Register -AT91C_SSC2_TNPR EQU (0xFFFD8118) ;- (PDC_SSC2) Transmit Next Pointer Register -AT91C_SSC2_RNPR EQU (0xFFFD8110) ;- (PDC_SSC2) Receive Next Pointer Register -AT91C_SSC2_TPR EQU (0xFFFD8108) ;- (PDC_SSC2) Transmit Pointer Register -AT91C_SSC2_RPR EQU (0xFFFD8100) ;- (PDC_SSC2) Receive Pointer Register -AT91C_SSC2_PTSR EQU (0xFFFD8124) ;- (PDC_SSC2) PDC Transfer Status Register -AT91C_SSC2_TNCR EQU (0xFFFD811C) ;- (PDC_SSC2) Transmit Next Counter Register -AT91C_SSC2_RNCR EQU (0xFFFD8114) ;- (PDC_SSC2) Receive Next Counter Register -AT91C_SSC2_TCR EQU (0xFFFD810C) ;- (PDC_SSC2) Transmit Counter Register -AT91C_SSC2_RCR EQU (0xFFFD8104) ;- (PDC_SSC2) Receive Counter Register -;- ========== Register definition for SSC2 peripheral ========== -AT91C_SSC2_IMR EQU (0xFFFD804C) ;- (SSC2) Interrupt Mask Register -AT91C_SSC2_IER EQU (0xFFFD8044) ;- (SSC2) Interrupt Enable Register -AT91C_SSC2_RC1R EQU (0xFFFD803C) ;- (SSC2) Receive Compare 1 Register -AT91C_SSC2_TSHR EQU (0xFFFD8034) ;- (SSC2) Transmit Sync Holding Register -AT91C_SSC2_CMR EQU (0xFFFD8004) ;- (SSC2) Clock Mode Register -AT91C_SSC2_IDR EQU (0xFFFD8048) ;- (SSC2) Interrupt Disable Register -AT91C_SSC2_TCMR EQU (0xFFFD8018) ;- (SSC2) Transmit Clock Mode Register -AT91C_SSC2_RCMR EQU (0xFFFD8010) ;- (SSC2) Receive Clock ModeRegister -AT91C_SSC2_CR EQU (0xFFFD8000) ;- (SSC2) Control Register -AT91C_SSC2_RFMR EQU (0xFFFD8014) ;- (SSC2) Receive Frame Mode Register -AT91C_SSC2_TFMR EQU (0xFFFD801C) ;- (SSC2) Transmit Frame Mode Register -AT91C_SSC2_THR EQU (0xFFFD8024) ;- (SSC2) Transmit Holding Register -AT91C_SSC2_SR EQU (0xFFFD8040) ;- (SSC2) Status Register -AT91C_SSC2_RC0R EQU (0xFFFD8038) ;- (SSC2) Receive Compare 0 Register -AT91C_SSC2_RSHR EQU (0xFFFD8030) ;- (SSC2) Receive Sync Holding Register -AT91C_SSC2_RHR EQU (0xFFFD8020) ;- (SSC2) Receive Holding Register -;- ========== Register definition for PDC_SSC1 peripheral ========== -AT91C_SSC1_PTCR EQU (0xFFFD4120) ;- (PDC_SSC1) PDC Transfer Control Register -AT91C_SSC1_TNPR EQU (0xFFFD4118) ;- (PDC_SSC1) Transmit Next Pointer Register -AT91C_SSC1_RNPR EQU (0xFFFD4110) ;- (PDC_SSC1) Receive Next Pointer Register -AT91C_SSC1_TPR EQU (0xFFFD4108) ;- (PDC_SSC1) Transmit Pointer Register -AT91C_SSC1_RPR EQU (0xFFFD4100) ;- (PDC_SSC1) Receive Pointer Register -AT91C_SSC1_PTSR EQU (0xFFFD4124) ;- (PDC_SSC1) PDC Transfer Status Register -AT91C_SSC1_TNCR EQU (0xFFFD411C) ;- (PDC_SSC1) Transmit Next Counter Register -AT91C_SSC1_RNCR EQU (0xFFFD4114) ;- (PDC_SSC1) Receive Next Counter Register -AT91C_SSC1_TCR EQU (0xFFFD410C) ;- (PDC_SSC1) Transmit Counter Register -AT91C_SSC1_RCR EQU (0xFFFD4104) ;- (PDC_SSC1) Receive Counter Register -;- ========== Register definition for SSC1 peripheral ========== -AT91C_SSC1_RFMR EQU (0xFFFD4014) ;- (SSC1) Receive Frame Mode Register -AT91C_SSC1_CMR EQU (0xFFFD4004) ;- (SSC1) Clock Mode Register -AT91C_SSC1_IDR EQU (0xFFFD4048) ;- (SSC1) Interrupt Disable Register -AT91C_SSC1_SR EQU (0xFFFD4040) ;- (SSC1) Status Register -AT91C_SSC1_RC0R EQU (0xFFFD4038) ;- (SSC1) Receive Compare 0 Register -AT91C_SSC1_RSHR EQU (0xFFFD4030) ;- (SSC1) Receive Sync Holding Register -AT91C_SSC1_RHR EQU (0xFFFD4020) ;- (SSC1) Receive Holding Register -AT91C_SSC1_TCMR EQU (0xFFFD4018) ;- (SSC1) Transmit Clock Mode Register -AT91C_SSC1_RCMR EQU (0xFFFD4010) ;- (SSC1) Receive Clock ModeRegister -AT91C_SSC1_CR EQU (0xFFFD4000) ;- (SSC1) Control Register -AT91C_SSC1_IMR EQU (0xFFFD404C) ;- (SSC1) Interrupt Mask Register -AT91C_SSC1_IER EQU (0xFFFD4044) ;- (SSC1) Interrupt Enable Register -AT91C_SSC1_RC1R EQU (0xFFFD403C) ;- (SSC1) Receive Compare 1 Register -AT91C_SSC1_TSHR EQU (0xFFFD4034) ;- (SSC1) Transmit Sync Holding Register -AT91C_SSC1_THR EQU (0xFFFD4024) ;- (SSC1) Transmit Holding Register -AT91C_SSC1_TFMR EQU (0xFFFD401C) ;- (SSC1) Transmit Frame Mode Register -;- ========== Register definition for PDC_SSC0 peripheral ========== -AT91C_SSC0_PTCR EQU (0xFFFD0120) ;- (PDC_SSC0) PDC Transfer Control Register -AT91C_SSC0_TNPR EQU (0xFFFD0118) ;- (PDC_SSC0) Transmit Next Pointer Register -AT91C_SSC0_RNPR EQU (0xFFFD0110) ;- (PDC_SSC0) Receive Next Pointer Register -AT91C_SSC0_TPR EQU (0xFFFD0108) ;- (PDC_SSC0) Transmit Pointer Register -AT91C_SSC0_RPR EQU (0xFFFD0100) ;- (PDC_SSC0) Receive Pointer Register -AT91C_SSC0_PTSR EQU (0xFFFD0124) ;- (PDC_SSC0) PDC Transfer Status Register -AT91C_SSC0_TNCR EQU (0xFFFD011C) ;- (PDC_SSC0) Transmit Next Counter Register -AT91C_SSC0_RNCR EQU (0xFFFD0114) ;- (PDC_SSC0) Receive Next Counter Register -AT91C_SSC0_TCR EQU (0xFFFD010C) ;- (PDC_SSC0) Transmit Counter Register -AT91C_SSC0_RCR EQU (0xFFFD0104) ;- (PDC_SSC0) Receive Counter Register -;- ========== Register definition for SSC0 peripheral ========== -AT91C_SSC0_IMR EQU (0xFFFD004C) ;- (SSC0) Interrupt Mask Register -AT91C_SSC0_IER EQU (0xFFFD0044) ;- (SSC0) Interrupt Enable Register -AT91C_SSC0_RC1R EQU (0xFFFD003C) ;- (SSC0) Receive Compare 1 Register -AT91C_SSC0_TSHR EQU (0xFFFD0034) ;- (SSC0) Transmit Sync Holding Register -AT91C_SSC0_THR EQU (0xFFFD0024) ;- (SSC0) Transmit Holding Register -AT91C_SSC0_TFMR EQU (0xFFFD001C) ;- (SSC0) Transmit Frame Mode Register -AT91C_SSC0_RFMR EQU (0xFFFD0014) ;- (SSC0) Receive Frame Mode Register -AT91C_SSC0_CMR EQU (0xFFFD0004) ;- (SSC0) Clock Mode Register -AT91C_SSC0_IDR EQU (0xFFFD0048) ;- (SSC0) Interrupt Disable Register -AT91C_SSC0_SR EQU (0xFFFD0040) ;- (SSC0) Status Register -AT91C_SSC0_RC0R EQU (0xFFFD0038) ;- (SSC0) Receive Compare 0 Register -AT91C_SSC0_RSHR EQU (0xFFFD0030) ;- (SSC0) Receive Sync Holding Register -AT91C_SSC0_RHR EQU (0xFFFD0020) ;- (SSC0) Receive Holding Register -AT91C_SSC0_TCMR EQU (0xFFFD0018) ;- (SSC0) Transmit Clock Mode Register -AT91C_SSC0_RCMR EQU (0xFFFD0010) ;- (SSC0) Receive Clock ModeRegister -AT91C_SSC0_CR EQU (0xFFFD0000) ;- (SSC0) Control Register -;- ========== Register definition for PDC_US3 peripheral ========== -AT91C_US3_PTSR EQU (0xFFFCC124) ;- (PDC_US3) PDC Transfer Status Register -AT91C_US3_TNCR EQU (0xFFFCC11C) ;- (PDC_US3) Transmit Next Counter Register -AT91C_US3_RNCR EQU (0xFFFCC114) ;- (PDC_US3) Receive Next Counter Register -AT91C_US3_TCR EQU (0xFFFCC10C) ;- (PDC_US3) Transmit Counter Register -AT91C_US3_RCR EQU (0xFFFCC104) ;- (PDC_US3) Receive Counter Register -AT91C_US3_PTCR EQU (0xFFFCC120) ;- (PDC_US3) PDC Transfer Control Register -AT91C_US3_TNPR EQU (0xFFFCC118) ;- (PDC_US3) Transmit Next Pointer Register -AT91C_US3_RNPR EQU (0xFFFCC110) ;- (PDC_US3) Receive Next Pointer Register -AT91C_US3_TPR EQU (0xFFFCC108) ;- (PDC_US3) Transmit Pointer Register -AT91C_US3_RPR EQU (0xFFFCC100) ;- (PDC_US3) Receive Pointer Register -;- ========== Register definition for US3 peripheral ========== -AT91C_US3_IF EQU (0xFFFCC04C) ;- (US3) IRDA_FILTER Register -AT91C_US3_NER EQU (0xFFFCC044) ;- (US3) Nb Errors Register -AT91C_US3_RTOR EQU (0xFFFCC024) ;- (US3) Receiver Time-out Register -AT91C_US3_THR EQU (0xFFFCC01C) ;- (US3) Transmitter Holding Register -AT91C_US3_CSR EQU (0xFFFCC014) ;- (US3) Channel Status Register -AT91C_US3_IDR EQU (0xFFFCC00C) ;- (US3) Interrupt Disable Register -AT91C_US3_MR EQU (0xFFFCC004) ;- (US3) Mode Register -AT91C_US3_XXR EQU (0xFFFCC048) ;- (US3) XON_XOFF Register -AT91C_US3_FIDI EQU (0xFFFCC040) ;- (US3) FI_DI_Ratio Register -AT91C_US3_TTGR EQU (0xFFFCC028) ;- (US3) Transmitter Time-guard Register -AT91C_US3_BRGR EQU (0xFFFCC020) ;- (US3) Baud Rate Generator Register -AT91C_US3_RHR EQU (0xFFFCC018) ;- (US3) Receiver Holding Register -AT91C_US3_IMR EQU (0xFFFCC010) ;- (US3) Interrupt Mask Register -AT91C_US3_IER EQU (0xFFFCC008) ;- (US3) Interrupt Enable Register -AT91C_US3_CR EQU (0xFFFCC000) ;- (US3) Control Register -;- ========== Register definition for PDC_US2 peripheral ========== -AT91C_US2_PTSR EQU (0xFFFC8124) ;- (PDC_US2) PDC Transfer Status Register -AT91C_US2_TNCR EQU (0xFFFC811C) ;- (PDC_US2) Transmit Next Counter Register -AT91C_US2_RNCR EQU (0xFFFC8114) ;- (PDC_US2) Receive Next Counter Register -AT91C_US2_TCR EQU (0xFFFC810C) ;- (PDC_US2) Transmit Counter Register -AT91C_US2_PTCR EQU (0xFFFC8120) ;- (PDC_US2) PDC Transfer Control Register -AT91C_US2_RCR EQU (0xFFFC8104) ;- (PDC_US2) Receive Counter Register -AT91C_US2_TNPR EQU (0xFFFC8118) ;- (PDC_US2) Transmit Next Pointer Register -AT91C_US2_RPR EQU (0xFFFC8100) ;- (PDC_US2) Receive Pointer Register -AT91C_US2_TPR EQU (0xFFFC8108) ;- (PDC_US2) Transmit Pointer Register -AT91C_US2_RNPR EQU (0xFFFC8110) ;- (PDC_US2) Receive Next Pointer Register -;- ========== Register definition for US2 peripheral ========== -AT91C_US2_XXR EQU (0xFFFC8048) ;- (US2) XON_XOFF Register -AT91C_US2_FIDI EQU (0xFFFC8040) ;- (US2) FI_DI_Ratio Register -AT91C_US2_TTGR EQU (0xFFFC8028) ;- (US2) Transmitter Time-guard Register -AT91C_US2_BRGR EQU (0xFFFC8020) ;- (US2) Baud Rate Generator Register -AT91C_US2_RHR EQU (0xFFFC8018) ;- (US2) Receiver Holding Register -AT91C_US2_IMR EQU (0xFFFC8010) ;- (US2) Interrupt Mask Register -AT91C_US2_IER EQU (0xFFFC8008) ;- (US2) Interrupt Enable Register -AT91C_US2_CR EQU (0xFFFC8000) ;- (US2) Control Register -AT91C_US2_IF EQU (0xFFFC804C) ;- (US2) IRDA_FILTER Register -AT91C_US2_NER EQU (0xFFFC8044) ;- (US2) Nb Errors Register -AT91C_US2_RTOR EQU (0xFFFC8024) ;- (US2) Receiver Time-out Register -AT91C_US2_THR EQU (0xFFFC801C) ;- (US2) Transmitter Holding Register -AT91C_US2_CSR EQU (0xFFFC8014) ;- (US2) Channel Status Register -AT91C_US2_IDR EQU (0xFFFC800C) ;- (US2) Interrupt Disable Register -AT91C_US2_MR EQU (0xFFFC8004) ;- (US2) Mode Register -;- ========== Register definition for PDC_US1 peripheral ========== -AT91C_US1_PTSR EQU (0xFFFC4124) ;- (PDC_US1) PDC Transfer Status Register -AT91C_US1_TNCR EQU (0xFFFC411C) ;- (PDC_US1) Transmit Next Counter Register -AT91C_US1_RNCR EQU (0xFFFC4114) ;- (PDC_US1) Receive Next Counter Register -AT91C_US1_TCR EQU (0xFFFC410C) ;- (PDC_US1) Transmit Counter Register -AT91C_US1_RCR EQU (0xFFFC4104) ;- (PDC_US1) Receive Counter Register -AT91C_US1_PTCR EQU (0xFFFC4120) ;- (PDC_US1) PDC Transfer Control Register -AT91C_US1_TNPR EQU (0xFFFC4118) ;- (PDC_US1) Transmit Next Pointer Register -AT91C_US1_RNPR EQU (0xFFFC4110) ;- (PDC_US1) Receive Next Pointer Register -AT91C_US1_TPR EQU (0xFFFC4108) ;- (PDC_US1) Transmit Pointer Register -AT91C_US1_RPR EQU (0xFFFC4100) ;- (PDC_US1) Receive Pointer Register -;- ========== Register definition for US1 peripheral ========== -AT91C_US1_XXR EQU (0xFFFC4048) ;- (US1) XON_XOFF Register -AT91C_US1_RHR EQU (0xFFFC4018) ;- (US1) Receiver Holding Register -AT91C_US1_IMR EQU (0xFFFC4010) ;- (US1) Interrupt Mask Register -AT91C_US1_IER EQU (0xFFFC4008) ;- (US1) Interrupt Enable Register -AT91C_US1_CR EQU (0xFFFC4000) ;- (US1) Control Register -AT91C_US1_RTOR EQU (0xFFFC4024) ;- (US1) Receiver Time-out Register -AT91C_US1_THR EQU (0xFFFC401C) ;- (US1) Transmitter Holding Register -AT91C_US1_CSR EQU (0xFFFC4014) ;- (US1) Channel Status Register -AT91C_US1_IDR EQU (0xFFFC400C) ;- (US1) Interrupt Disable Register -AT91C_US1_FIDI EQU (0xFFFC4040) ;- (US1) FI_DI_Ratio Register -AT91C_US1_BRGR EQU (0xFFFC4020) ;- (US1) Baud Rate Generator Register -AT91C_US1_TTGR EQU (0xFFFC4028) ;- (US1) Transmitter Time-guard Register -AT91C_US1_IF EQU (0xFFFC404C) ;- (US1) IRDA_FILTER Register -AT91C_US1_NER EQU (0xFFFC4044) ;- (US1) Nb Errors Register -AT91C_US1_MR EQU (0xFFFC4004) ;- (US1) Mode Register -;- ========== Register definition for PDC_US0 peripheral ========== -AT91C_US0_PTCR EQU (0xFFFC0120) ;- (PDC_US0) PDC Transfer Control Register -AT91C_US0_TNPR EQU (0xFFFC0118) ;- (PDC_US0) Transmit Next Pointer Register -AT91C_US0_RNPR EQU (0xFFFC0110) ;- (PDC_US0) Receive Next Pointer Register -AT91C_US0_TPR EQU (0xFFFC0108) ;- (PDC_US0) Transmit Pointer Register -AT91C_US0_RPR EQU (0xFFFC0100) ;- (PDC_US0) Receive Pointer Register -AT91C_US0_PTSR EQU (0xFFFC0124) ;- (PDC_US0) PDC Transfer Status Register -AT91C_US0_TNCR EQU (0xFFFC011C) ;- (PDC_US0) Transmit Next Counter Register -AT91C_US0_RNCR EQU (0xFFFC0114) ;- (PDC_US0) Receive Next Counter Register -AT91C_US0_TCR EQU (0xFFFC010C) ;- (PDC_US0) Transmit Counter Register -AT91C_US0_RCR EQU (0xFFFC0104) ;- (PDC_US0) Receive Counter Register -;- ========== Register definition for US0 peripheral ========== -AT91C_US0_TTGR EQU (0xFFFC0028) ;- (US0) Transmitter Time-guard Register -AT91C_US0_BRGR EQU (0xFFFC0020) ;- (US0) Baud Rate Generator Register -AT91C_US0_RHR EQU (0xFFFC0018) ;- (US0) Receiver Holding Register -AT91C_US0_IMR EQU (0xFFFC0010) ;- (US0) Interrupt Mask Register -AT91C_US0_NER EQU (0xFFFC0044) ;- (US0) Nb Errors Register -AT91C_US0_RTOR EQU (0xFFFC0024) ;- (US0) Receiver Time-out Register -AT91C_US0_XXR EQU (0xFFFC0048) ;- (US0) XON_XOFF Register -AT91C_US0_FIDI EQU (0xFFFC0040) ;- (US0) FI_DI_Ratio Register -AT91C_US0_CR EQU (0xFFFC0000) ;- (US0) Control Register -AT91C_US0_IER EQU (0xFFFC0008) ;- (US0) Interrupt Enable Register -AT91C_US0_IF EQU (0xFFFC004C) ;- (US0) IRDA_FILTER Register -AT91C_US0_MR EQU (0xFFFC0004) ;- (US0) Mode Register -AT91C_US0_IDR EQU (0xFFFC000C) ;- (US0) Interrupt Disable Register -AT91C_US0_CSR EQU (0xFFFC0014) ;- (US0) Channel Status Register -AT91C_US0_THR EQU (0xFFFC001C) ;- (US0) Transmitter Holding Register -;- ========== Register definition for TWI peripheral ========== -AT91C_TWI_RHR EQU (0xFFFB8030) ;- (TWI) Receive Holding Register -AT91C_TWI_IDR EQU (0xFFFB8028) ;- (TWI) Interrupt Disable Register -AT91C_TWI_SR EQU (0xFFFB8020) ;- (TWI) Status Register -AT91C_TWI_CWGR EQU (0xFFFB8010) ;- (TWI) Clock Waveform Generator Register -AT91C_TWI_SMR EQU (0xFFFB8008) ;- (TWI) Slave Mode Register -AT91C_TWI_CR EQU (0xFFFB8000) ;- (TWI) Control Register -AT91C_TWI_THR EQU (0xFFFB8034) ;- (TWI) Transmit Holding Register -AT91C_TWI_IMR EQU (0xFFFB802C) ;- (TWI) Interrupt Mask Register -AT91C_TWI_IER EQU (0xFFFB8024) ;- (TWI) Interrupt Enable Register -AT91C_TWI_IADR EQU (0xFFFB800C) ;- (TWI) Internal Address Register -AT91C_TWI_MMR EQU (0xFFFB8004) ;- (TWI) Master Mode Register -;- ========== Register definition for PDC_MCI peripheral ========== -AT91C_MCI_PTCR EQU (0xFFFB4120) ;- (PDC_MCI) PDC Transfer Control Register -AT91C_MCI_TNPR EQU (0xFFFB4118) ;- (PDC_MCI) Transmit Next Pointer Register -AT91C_MCI_RNPR EQU (0xFFFB4110) ;- (PDC_MCI) Receive Next Pointer Register -AT91C_MCI_TPR EQU (0xFFFB4108) ;- (PDC_MCI) Transmit Pointer Register -AT91C_MCI_RPR EQU (0xFFFB4100) ;- (PDC_MCI) Receive Pointer Register -AT91C_MCI_PTSR EQU (0xFFFB4124) ;- (PDC_MCI) PDC Transfer Status Register -AT91C_MCI_TNCR EQU (0xFFFB411C) ;- (PDC_MCI) Transmit Next Counter Register -AT91C_MCI_RNCR EQU (0xFFFB4114) ;- (PDC_MCI) Receive Next Counter Register -AT91C_MCI_TCR EQU (0xFFFB410C) ;- (PDC_MCI) Transmit Counter Register -AT91C_MCI_RCR EQU (0xFFFB4104) ;- (PDC_MCI) Receive Counter Register -;- ========== Register definition for MCI peripheral ========== -AT91C_MCI_IDR EQU (0xFFFB4048) ;- (MCI) MCI Interrupt Disable Register -AT91C_MCI_SR EQU (0xFFFB4040) ;- (MCI) MCI Status Register -AT91C_MCI_RDR EQU (0xFFFB4030) ;- (MCI) MCI Receive Data Register -AT91C_MCI_RSPR EQU (0xFFFB4020) ;- (MCI) MCI Response Register -AT91C_MCI_ARGR EQU (0xFFFB4010) ;- (MCI) MCI Argument Register -AT91C_MCI_DTOR EQU (0xFFFB4008) ;- (MCI) MCI Data Timeout Register -AT91C_MCI_CR EQU (0xFFFB4000) ;- (MCI) MCI Control Register -AT91C_MCI_IMR EQU (0xFFFB404C) ;- (MCI) MCI Interrupt Mask Register -AT91C_MCI_IER EQU (0xFFFB4044) ;- (MCI) MCI Interrupt Enable Register -AT91C_MCI_TDR EQU (0xFFFB4034) ;- (MCI) MCI Transmit Data Register -AT91C_MCI_CMDR EQU (0xFFFB4014) ;- (MCI) MCI Command Register -AT91C_MCI_SDCR EQU (0xFFFB400C) ;- (MCI) MCI SD Card Register -AT91C_MCI_MR EQU (0xFFFB4004) ;- (MCI) MCI Mode Register -;- ========== Register definition for UDP peripheral ========== -AT91C_UDP_ISR EQU (0xFFFB001C) ;- (UDP) Interrupt Status Register -AT91C_UDP_IDR EQU (0xFFFB0014) ;- (UDP) Interrupt Disable Register -AT91C_UDP_GLBSTATE EQU (0xFFFB0004) ;- (UDP) Global State Register -AT91C_UDP_FDR EQU (0xFFFB0050) ;- (UDP) Endpoint FIFO Data Register -AT91C_UDP_CSR EQU (0xFFFB0030) ;- (UDP) Endpoint Control and Status Register -AT91C_UDP_RSTEP EQU (0xFFFB0028) ;- (UDP) Reset Endpoint Register -AT91C_UDP_ICR EQU (0xFFFB0020) ;- (UDP) Interrupt Clear Register -AT91C_UDP_IMR EQU (0xFFFB0018) ;- (UDP) Interrupt Mask Register -AT91C_UDP_IER EQU (0xFFFB0010) ;- (UDP) Interrupt Enable Register -AT91C_UDP_FADDR EQU (0xFFFB0008) ;- (UDP) Function Address Register -AT91C_UDP_NUM EQU (0xFFFB0000) ;- (UDP) Frame Number Register -;- ========== Register definition for TC5 peripheral ========== -AT91C_TC5_CMR EQU (0xFFFA4084) ;- (TC5) Channel Mode Register -AT91C_TC5_IDR EQU (0xFFFA40A8) ;- (TC5) Interrupt Disable Register -AT91C_TC5_SR EQU (0xFFFA40A0) ;- (TC5) Status Register -AT91C_TC5_RB EQU (0xFFFA4098) ;- (TC5) Register B -AT91C_TC5_CV EQU (0xFFFA4090) ;- (TC5) Counter Value -AT91C_TC5_CCR EQU (0xFFFA4080) ;- (TC5) Channel Control Register -AT91C_TC5_IMR EQU (0xFFFA40AC) ;- (TC5) Interrupt Mask Register -AT91C_TC5_IER EQU (0xFFFA40A4) ;- (TC5) Interrupt Enable Register -AT91C_TC5_RC EQU (0xFFFA409C) ;- (TC5) Register C -AT91C_TC5_RA EQU (0xFFFA4094) ;- (TC5) Register A -;- ========== Register definition for TC4 peripheral ========== -AT91C_TC4_IMR EQU (0xFFFA406C) ;- (TC4) Interrupt Mask Register -AT91C_TC4_IER EQU (0xFFFA4064) ;- (TC4) Interrupt Enable Register -AT91C_TC4_RC EQU (0xFFFA405C) ;- (TC4) Register C -AT91C_TC4_RA EQU (0xFFFA4054) ;- (TC4) Register A -AT91C_TC4_CMR EQU (0xFFFA4044) ;- (TC4) Channel Mode Register -AT91C_TC4_IDR EQU (0xFFFA4068) ;- (TC4) Interrupt Disable Register -AT91C_TC4_SR EQU (0xFFFA4060) ;- (TC4) Status Register -AT91C_TC4_RB EQU (0xFFFA4058) ;- (TC4) Register B -AT91C_TC4_CV EQU (0xFFFA4050) ;- (TC4) Counter Value -AT91C_TC4_CCR EQU (0xFFFA4040) ;- (TC4) Channel Control Register -;- ========== Register definition for TC3 peripheral ========== -AT91C_TC3_IMR EQU (0xFFFA402C) ;- (TC3) Interrupt Mask Register -AT91C_TC3_CV EQU (0xFFFA4010) ;- (TC3) Counter Value -AT91C_TC3_CCR EQU (0xFFFA4000) ;- (TC3) Channel Control Register -AT91C_TC3_IER EQU (0xFFFA4024) ;- (TC3) Interrupt Enable Register -AT91C_TC3_CMR EQU (0xFFFA4004) ;- (TC3) Channel Mode Register -AT91C_TC3_RA EQU (0xFFFA4014) ;- (TC3) Register A -AT91C_TC3_RC EQU (0xFFFA401C) ;- (TC3) Register C -AT91C_TC3_IDR EQU (0xFFFA4028) ;- (TC3) Interrupt Disable Register -AT91C_TC3_RB EQU (0xFFFA4018) ;- (TC3) Register B -AT91C_TC3_SR EQU (0xFFFA4020) ;- (TC3) Status Register -;- ========== Register definition for TCB1 peripheral ========== -AT91C_TCB1_BCR EQU (0xFFFA4140) ;- (TCB1) TC Block Control Register -AT91C_TCB1_BMR EQU (0xFFFA4144) ;- (TCB1) TC Block Mode Register -;- ========== Register definition for TC2 peripheral ========== -AT91C_TC2_IMR EQU (0xFFFA00AC) ;- (TC2) Interrupt Mask Register -AT91C_TC2_IER EQU (0xFFFA00A4) ;- (TC2) Interrupt Enable Register -AT91C_TC2_RC EQU (0xFFFA009C) ;- (TC2) Register C -AT91C_TC2_RA EQU (0xFFFA0094) ;- (TC2) Register A -AT91C_TC2_CMR EQU (0xFFFA0084) ;- (TC2) Channel Mode Register -AT91C_TC2_IDR EQU (0xFFFA00A8) ;- (TC2) Interrupt Disable Register -AT91C_TC2_SR EQU (0xFFFA00A0) ;- (TC2) Status Register -AT91C_TC2_RB EQU (0xFFFA0098) ;- (TC2) Register B -AT91C_TC2_CV EQU (0xFFFA0090) ;- (TC2) Counter Value -AT91C_TC2_CCR EQU (0xFFFA0080) ;- (TC2) Channel Control Register -;- ========== Register definition for TC1 peripheral ========== -AT91C_TC1_IMR EQU (0xFFFA006C) ;- (TC1) Interrupt Mask Register -AT91C_TC1_IER EQU (0xFFFA0064) ;- (TC1) Interrupt Enable Register -AT91C_TC1_RC EQU (0xFFFA005C) ;- (TC1) Register C -AT91C_TC1_RA EQU (0xFFFA0054) ;- (TC1) Register A -AT91C_TC1_CMR EQU (0xFFFA0044) ;- (TC1) Channel Mode Register -AT91C_TC1_IDR EQU (0xFFFA0068) ;- (TC1) Interrupt Disable Register -AT91C_TC1_SR EQU (0xFFFA0060) ;- (TC1) Status Register -AT91C_TC1_RB EQU (0xFFFA0058) ;- (TC1) Register B -AT91C_TC1_CV EQU (0xFFFA0050) ;- (TC1) Counter Value -AT91C_TC1_CCR EQU (0xFFFA0040) ;- (TC1) Channel Control Register -;- ========== Register definition for TC0 peripheral ========== -AT91C_TC0_IMR EQU (0xFFFA002C) ;- (TC0) Interrupt Mask Register -AT91C_TC0_IER EQU (0xFFFA0024) ;- (TC0) Interrupt Enable Register -AT91C_TC0_RC EQU (0xFFFA001C) ;- (TC0) Register C -AT91C_TC0_RA EQU (0xFFFA0014) ;- (TC0) Register A -AT91C_TC0_CMR EQU (0xFFFA0004) ;- (TC0) Channel Mode Register -AT91C_TC0_IDR EQU (0xFFFA0028) ;- (TC0) Interrupt Disable Register -AT91C_TC0_SR EQU (0xFFFA0020) ;- (TC0) Status Register -AT91C_TC0_RB EQU (0xFFFA0018) ;- (TC0) Register B -AT91C_TC0_CV EQU (0xFFFA0010) ;- (TC0) Counter Value -AT91C_TC0_CCR EQU (0xFFFA0000) ;- (TC0) Channel Control Register -;- ========== Register definition for TCB0 peripheral ========== -AT91C_TCB0_BMR EQU (0xFFFA00C4) ;- (TCB0) TC Block Mode Register -AT91C_TCB0_BCR EQU (0xFFFA00C0) ;- (TCB0) TC Block Control Register -;- ========== Register definition for UHP peripheral ========== -AT91C_UHP_HcRhDescriptorA EQU (0x00300048) ;- (UHP) Root Hub characteristics A -AT91C_UHP_HcRhPortStatus EQU (0x00300054) ;- (UHP) Root Hub Port Status Register -AT91C_UHP_HcRhDescriptorB EQU (0x0030004C) ;- (UHP) Root Hub characteristics B -AT91C_UHP_HcControl EQU (0x00300004) ;- (UHP) Operating modes for the Host Controller -AT91C_UHP_HcInterruptStatus EQU (0x0030000C) ;- (UHP) Interrupt Status Register -AT91C_UHP_HcRhStatus EQU (0x00300050) ;- (UHP) Root Hub Status register -AT91C_UHP_HcRevision EQU (0x00300000) ;- (UHP) Revision -AT91C_UHP_HcCommandStatus EQU (0x00300008) ;- (UHP) Command & status Register -AT91C_UHP_HcInterruptEnable EQU (0x00300010) ;- (UHP) Interrupt Enable Register -AT91C_UHP_HcHCCA EQU (0x00300018) ;- (UHP) Pointer to the Host Controller Communication Area -AT91C_UHP_HcControlHeadED EQU (0x00300020) ;- (UHP) First Endpoint Descriptor of the Control list -AT91C_UHP_HcInterruptDisable EQU (0x00300014) ;- (UHP) Interrupt Disable Register -AT91C_UHP_HcPeriodCurrentED EQU (0x0030001C) ;- (UHP) Current Isochronous or Interrupt Endpoint Descriptor -AT91C_UHP_HcControlCurrentED EQU (0x00300024) ;- (UHP) Endpoint Control and Status Register -AT91C_UHP_HcBulkCurrentED EQU (0x0030002C) ;- (UHP) Current endpoint of the Bulk list -AT91C_UHP_HcFmInterval EQU (0x00300034) ;- (UHP) Bit time between 2 consecutive SOFs -AT91C_UHP_HcBulkHeadED EQU (0x00300028) ;- (UHP) First endpoint register of the Bulk list -AT91C_UHP_HcBulkDoneHead EQU (0x00300030) ;- (UHP) Last completed transfer descriptor -AT91C_UHP_HcFmRemaining EQU (0x00300038) ;- (UHP) Bit time remaining in the current Frame -AT91C_UHP_HcPeriodicStart EQU (0x00300040) ;- (UHP) Periodic Start -AT91C_UHP_HcLSThreshold EQU (0x00300044) ;- (UHP) LS Threshold -AT91C_UHP_HcFmNumber EQU (0x0030003C) ;- (UHP) Frame number -;- ========== Register definition for EMAC peripheral ========== -AT91C_EMAC_RSR EQU (0xFFFBC020) ;- (EMAC) Receive Status Register -AT91C_EMAC_MAN EQU (0xFFFBC034) ;- (EMAC) PHY Maintenance Register -AT91C_EMAC_HSH EQU (0xFFFBC090) ;- (EMAC) Hash Address High[63:32] -AT91C_EMAC_MCOL EQU (0xFFFBC048) ;- (EMAC) Multiple Collision Frame Register -AT91C_EMAC_IER EQU (0xFFFBC028) ;- (EMAC) Interrupt Enable Register -AT91C_EMAC_SA2H EQU (0xFFFBC0A4) ;- (EMAC) Specific Address 2 High, Last 2 bytes -AT91C_EMAC_HSL EQU (0xFFFBC094) ;- (EMAC) Hash Address Low[31:0] -AT91C_EMAC_LCOL EQU (0xFFFBC05C) ;- (EMAC) Late Collision Register -AT91C_EMAC_OK EQU (0xFFFBC04C) ;- (EMAC) Frames Received OK Register -AT91C_EMAC_CFG EQU (0xFFFBC004) ;- (EMAC) Network Configuration Register -AT91C_EMAC_SA3L EQU (0xFFFBC0A8) ;- (EMAC) Specific Address 3 Low, First 4 bytes -AT91C_EMAC_SEQE EQU (0xFFFBC050) ;- (EMAC) Frame Check Sequence Error Register -AT91C_EMAC_ECOL EQU (0xFFFBC060) ;- (EMAC) Excessive Collision Register -AT91C_EMAC_ELR EQU (0xFFFBC070) ;- (EMAC) Excessive Length Error Register -AT91C_EMAC_SR EQU (0xFFFBC008) ;- (EMAC) Network Status Register -AT91C_EMAC_RBQP EQU (0xFFFBC018) ;- (EMAC) Receive Buffer Queue Pointer -AT91C_EMAC_CSE EQU (0xFFFBC064) ;- (EMAC) Carrier Sense Error Register -AT91C_EMAC_RJB EQU (0xFFFBC074) ;- (EMAC) Receive Jabber Register -AT91C_EMAC_USF EQU (0xFFFBC078) ;- (EMAC) Undersize Frame Register -AT91C_EMAC_IDR EQU (0xFFFBC02C) ;- (EMAC) Interrupt Disable Register -AT91C_EMAC_SA1L EQU (0xFFFBC098) ;- (EMAC) Specific Address 1 Low, First 4 bytes -AT91C_EMAC_IMR EQU (0xFFFBC030) ;- (EMAC) Interrupt Mask Register -AT91C_EMAC_FRA EQU (0xFFFBC040) ;- (EMAC) Frames Transmitted OK Register -AT91C_EMAC_SA3H EQU (0xFFFBC0AC) ;- (EMAC) Specific Address 3 High, Last 2 bytes -AT91C_EMAC_SA1H EQU (0xFFFBC09C) ;- (EMAC) Specific Address 1 High, Last 2 bytes -AT91C_EMAC_SCOL EQU (0xFFFBC044) ;- (EMAC) Single Collision Frame Register -AT91C_EMAC_ALE EQU (0xFFFBC054) ;- (EMAC) Alignment Error Register -AT91C_EMAC_TAR EQU (0xFFFBC00C) ;- (EMAC) Transmit Address Register -AT91C_EMAC_SA4L EQU (0xFFFBC0B0) ;- (EMAC) Specific Address 4 Low, First 4 bytes -AT91C_EMAC_SA2L EQU (0xFFFBC0A0) ;- (EMAC) Specific Address 2 Low, First 4 bytes -AT91C_EMAC_TUE EQU (0xFFFBC068) ;- (EMAC) Transmit Underrun Error Register -AT91C_EMAC_DTE EQU (0xFFFBC058) ;- (EMAC) Deferred Transmission Frame Register -AT91C_EMAC_TCR EQU (0xFFFBC010) ;- (EMAC) Transmit Control Register -AT91C_EMAC_CTL EQU (0xFFFBC000) ;- (EMAC) Network Control Register -AT91C_EMAC_SA4H EQU (0xFFFBC0B4) ;- (EMAC) Specific Address 4 High, Last 2 bytesr -AT91C_EMAC_CDE EQU (0xFFFBC06C) ;- (EMAC) Code Error Register -AT91C_EMAC_SQEE EQU (0xFFFBC07C) ;- (EMAC) SQE Test Error Register -AT91C_EMAC_TSR EQU (0xFFFBC014) ;- (EMAC) Transmit Status Register -AT91C_EMAC_DRFC EQU (0xFFFBC080) ;- (EMAC) Discarded RX Frame Register -;- ========== Register definition for EBI peripheral ========== -AT91C_EBI_CFGR EQU (0xFFFFFF64) ;- (EBI) Configuration Register -AT91C_EBI_CSA EQU (0xFFFFFF60) ;- (EBI) Chip Select Assignment Register -;- ========== Register definition for SMC2 peripheral ========== -AT91C_SMC2_CSR EQU (0xFFFFFF70) ;- (SMC2) SMC2 Chip Select Register -;- ========== Register definition for SDRC peripheral ========== -AT91C_SDRC_IMR EQU (0xFFFFFFAC) ;- (SDRC) SDRAM Controller Interrupt Mask Register -AT91C_SDRC_IER EQU (0xFFFFFFA4) ;- (SDRC) SDRAM Controller Interrupt Enable Register -AT91C_SDRC_SRR EQU (0xFFFFFF9C) ;- (SDRC) SDRAM Controller Self Refresh Register -AT91C_SDRC_TR EQU (0xFFFFFF94) ;- (SDRC) SDRAM Controller Refresh Timer Register -AT91C_SDRC_ISR EQU (0xFFFFFFB0) ;- (SDRC) SDRAM Controller Interrupt Mask Register -AT91C_SDRC_IDR EQU (0xFFFFFFA8) ;- (SDRC) SDRAM Controller Interrupt Disable Register -AT91C_SDRC_LPR EQU (0xFFFFFFA0) ;- (SDRC) SDRAM Controller Low Power Register -AT91C_SDRC_CR EQU (0xFFFFFF98) ;- (SDRC) SDRAM Controller Configuration Register -AT91C_SDRC_MR EQU (0xFFFFFF90) ;- (SDRC) SDRAM Controller Mode Register -;- ========== Register definition for BFC peripheral ========== -AT91C_BFC_MR EQU (0xFFFFFFC0) ;- (BFC) BFC Mode Register - -;- ***************************************************************************** -;- PIO DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_PIO_PA0 EQU (1:SHL:0) ;- Pin Controlled by PA0 -AT91C_PA0_MISO EQU (AT91C_PIO_PA0) ;- SPI Master In Slave -AT91C_PA0_PCK3 EQU (AT91C_PIO_PA0) ;- PMC Programmable Clock Output 3 -AT91C_PIO_PA1 EQU (1:SHL:1) ;- Pin Controlled by PA1 -AT91C_PA1_MOSI EQU (AT91C_PIO_PA1) ;- SPI Master Out Slave -AT91C_PA1_PCK0 EQU (AT91C_PIO_PA1) ;- PMC Programmable Clock Output 0 -AT91C_PIO_PA10 EQU (1:SHL:10) ;- Pin Controlled by PA10 -AT91C_PA10_ETX1 EQU (AT91C_PIO_PA10) ;- Ethernet MAC Transmit Data 1 -AT91C_PA10_MCDB1 EQU (AT91C_PIO_PA10) ;- Multimedia Card B Data 1 -AT91C_PIO_PA11 EQU (1:SHL:11) ;- Pin Controlled by PA11 -AT91C_PA11_ECRS_ECRSDV EQU (AT91C_PIO_PA11) ;- Ethernet MAC Carrier Sense/Carrier Sense and Data Valid -AT91C_PA11_MCDB2 EQU (AT91C_PIO_PA11) ;- Multimedia Card B Data 2 -AT91C_PIO_PA12 EQU (1:SHL:12) ;- Pin Controlled by PA12 -AT91C_PA12_ERX0 EQU (AT91C_PIO_PA12) ;- Ethernet MAC Receive Data 0 -AT91C_PA12_MCDB3 EQU (AT91C_PIO_PA12) ;- Multimedia Card B Data 3 -AT91C_PIO_PA13 EQU (1:SHL:13) ;- Pin Controlled by PA13 -AT91C_PA13_ERX1 EQU (AT91C_PIO_PA13) ;- Ethernet MAC Receive Data 1 -AT91C_PA13_TCLK0 EQU (AT91C_PIO_PA13) ;- Timer Counter 0 external clock input -AT91C_PIO_PA14 EQU (1:SHL:14) ;- Pin Controlled by PA14 -AT91C_PA14_ERXER EQU (AT91C_PIO_PA14) ;- Ethernet MAC Receive Error -AT91C_PA14_TCLK1 EQU (AT91C_PIO_PA14) ;- Timer Counter 1 external clock input -AT91C_PIO_PA15 EQU (1:SHL:15) ;- Pin Controlled by PA15 -AT91C_PA15_EMDC EQU (AT91C_PIO_PA15) ;- Ethernet MAC Management Data Clock -AT91C_PA15_TCLK2 EQU (AT91C_PIO_PA15) ;- Timer Counter 2 external clock input -AT91C_PIO_PA16 EQU (1:SHL:16) ;- Pin Controlled by PA16 -AT91C_PA16_EMDIO EQU (AT91C_PIO_PA16) ;- Ethernet MAC Management Data Input/Output -AT91C_PA16_IRQ6 EQU (AT91C_PIO_PA16) ;- AIC Interrupt input 6 -AT91C_PIO_PA17 EQU (1:SHL:17) ;- Pin Controlled by PA17 -AT91C_PA17_TXD0 EQU (AT91C_PIO_PA17) ;- USART 0 Transmit Data -AT91C_PA17_TIOA0 EQU (AT91C_PIO_PA17) ;- Timer Counter 0 Multipurpose Timer I/O Pin A -AT91C_PIO_PA18 EQU (1:SHL:18) ;- Pin Controlled by PA18 -AT91C_PA18_RXD0 EQU (AT91C_PIO_PA18) ;- USART 0 Receive Data -AT91C_PA18_TIOB0 EQU (AT91C_PIO_PA18) ;- Timer Counter 0 Multipurpose Timer I/O Pin B -AT91C_PIO_PA19 EQU (1:SHL:19) ;- Pin Controlled by PA19 -AT91C_PA19_SCK0 EQU (AT91C_PIO_PA19) ;- USART 0 Serial Clock -AT91C_PA19_TIOA1 EQU (AT91C_PIO_PA19) ;- Timer Counter 1 Multipurpose Timer I/O Pin A -AT91C_PIO_PA2 EQU (1:SHL:2) ;- Pin Controlled by PA2 -AT91C_PA2_SPCK EQU (AT91C_PIO_PA2) ;- SPI Serial Clock -AT91C_PA2_IRQ4 EQU (AT91C_PIO_PA2) ;- AIC Interrupt Input 4 -AT91C_PIO_PA20 EQU (1:SHL:20) ;- Pin Controlled by PA20 -AT91C_PA20_CTS0 EQU (AT91C_PIO_PA20) ;- USART 0 Clear To Send -AT91C_PA20_TIOB1 EQU (AT91C_PIO_PA20) ;- Timer Counter 1 Multipurpose Timer I/O Pin B -AT91C_PIO_PA21 EQU (1:SHL:21) ;- Pin Controlled by PA21 -AT91C_PA21_RTS0 EQU (AT91C_PIO_PA21) ;- Usart 0 Ready To Send -AT91C_PA21_TIOA2 EQU (AT91C_PIO_PA21) ;- Timer Counter 2 Multipurpose Timer I/O Pin A -AT91C_PIO_PA22 EQU (1:SHL:22) ;- Pin Controlled by PA22 -AT91C_PA22_RXD2 EQU (AT91C_PIO_PA22) ;- USART 2 Receive Data -AT91C_PA22_TIOB2 EQU (AT91C_PIO_PA22) ;- Timer Counter 2 Multipurpose Timer I/O Pin B -AT91C_PIO_PA23 EQU (1:SHL:23) ;- Pin Controlled by PA23 -AT91C_PA23_TXD2 EQU (AT91C_PIO_PA23) ;- USART 2 Transmit Data -AT91C_PA23_IRQ3 EQU (AT91C_PIO_PA23) ;- Interrupt input 3 -AT91C_PIO_PA24 EQU (1:SHL:24) ;- Pin Controlled by PA24 -AT91C_PA24_SCK2 EQU (AT91C_PIO_PA24) ;- USART2 Serial Clock -AT91C_PA24_PCK1 EQU (AT91C_PIO_PA24) ;- PMC Programmable Clock Output 1 -AT91C_PIO_PA25 EQU (1:SHL:25) ;- Pin Controlled by PA25 -AT91C_PA25_TWD EQU (AT91C_PIO_PA25) ;- TWI Two-wire Serial Data -AT91C_PA25_IRQ2 EQU (AT91C_PIO_PA25) ;- Interrupt input 2 -AT91C_PIO_PA26 EQU (1:SHL:26) ;- Pin Controlled by PA26 -AT91C_PA26_TWCK EQU (AT91C_PIO_PA26) ;- TWI Two-wire Serial Clock -AT91C_PA26_IRQ1 EQU (AT91C_PIO_PA26) ;- Interrupt input 1 -AT91C_PIO_PA27 EQU (1:SHL:27) ;- Pin Controlled by PA27 -AT91C_PA27_MCCK EQU (AT91C_PIO_PA27) ;- Multimedia Card Clock -AT91C_PA27_TCLK3 EQU (AT91C_PIO_PA27) ;- Timer Counter 3 External Clock Input -AT91C_PIO_PA28 EQU (1:SHL:28) ;- Pin Controlled by PA28 -AT91C_PA28_MCCDA EQU (AT91C_PIO_PA28) ;- Multimedia Card A Command -AT91C_PA28_TCLK4 EQU (AT91C_PIO_PA28) ;- Timer Counter 4 external Clock Input -AT91C_PIO_PA29 EQU (1:SHL:29) ;- Pin Controlled by PA29 -AT91C_PA29_MCDA0 EQU (AT91C_PIO_PA29) ;- Multimedia Card A Data 0 -AT91C_PA29_TCLK5 EQU (AT91C_PIO_PA29) ;- Timer Counter 5 external clock input -AT91C_PIO_PA3 EQU (1:SHL:3) ;- Pin Controlled by PA3 -AT91C_PA3_NPCS0 EQU (AT91C_PIO_PA3) ;- SPI Peripheral Chip Select 0 -AT91C_PA3_IRQ5 EQU (AT91C_PIO_PA3) ;- AIC Interrupt Input 5 -AT91C_PIO_PA30 EQU (1:SHL:30) ;- Pin Controlled by PA30 -AT91C_PA30_DRXD EQU (AT91C_PIO_PA30) ;- DBGU Debug Receive Data -AT91C_PA30_CTS2 EQU (AT91C_PIO_PA30) ;- Usart 2 Clear To Send -AT91C_PIO_PA31 EQU (1:SHL:31) ;- Pin Controlled by PA31 -AT91C_PA31_DTXD EQU (AT91C_PIO_PA31) ;- DBGU Debug Transmit Data -AT91C_PA31_RTS2 EQU (AT91C_PIO_PA31) ;- USART 2 Ready To Send -AT91C_PIO_PA4 EQU (1:SHL:4) ;- Pin Controlled by PA4 -AT91C_PA4_NPCS1 EQU (AT91C_PIO_PA4) ;- SPI Peripheral Chip Select 1 -AT91C_PA4_PCK1 EQU (AT91C_PIO_PA4) ;- PMC Programmable Clock Output 1 -AT91C_PIO_PA5 EQU (1:SHL:5) ;- Pin Controlled by PA5 -AT91C_PA5_NPCS2 EQU (AT91C_PIO_PA5) ;- SPI Peripheral Chip Select 2 -AT91C_PA5_TXD3 EQU (AT91C_PIO_PA5) ;- USART 3 Transmit Data -AT91C_PIO_PA6 EQU (1:SHL:6) ;- Pin Controlled by PA6 -AT91C_PA6_NPCS3 EQU (AT91C_PIO_PA6) ;- SPI Peripheral Chip Select 3 -AT91C_PA6_RXD3 EQU (AT91C_PIO_PA6) ;- USART 3 Receive Data -AT91C_PIO_PA7 EQU (1:SHL:7) ;- Pin Controlled by PA7 -AT91C_PA7_ETXCK_EREFCK EQU (AT91C_PIO_PA7) ;- Ethernet MAC Transmit Clock/Reference Clock -AT91C_PA7_PCK2 EQU (AT91C_PIO_PA7) ;- PMC Programmable Clock 2 -AT91C_PIO_PA8 EQU (1:SHL:8) ;- Pin Controlled by PA8 -AT91C_PA8_ETXEN EQU (AT91C_PIO_PA8) ;- Ethernet MAC Transmit Enable -AT91C_PA8_MCCDB EQU (AT91C_PIO_PA8) ;- Multimedia Card B Command -AT91C_PIO_PA9 EQU (1:SHL:9) ;- Pin Controlled by PA9 -AT91C_PA9_ETX0 EQU (AT91C_PIO_PA9) ;- Ethernet MAC Transmit Data 0 -AT91C_PA9_MCDB0 EQU (AT91C_PIO_PA9) ;- Multimedia Card B Data 0 -AT91C_PIO_PB0 EQU (1:SHL:0) ;- Pin Controlled by PB0 -AT91C_PB0_TF0 EQU (AT91C_PIO_PB0) ;- SSC Transmit Frame Sync 0 -AT91C_PB0_TIOB3 EQU (AT91C_PIO_PB0) ;- Timer Counter 3 Multipurpose Timer I/O Pin B -AT91C_PIO_PB1 EQU (1:SHL:1) ;- Pin Controlled by PB1 -AT91C_PB1_TK0 EQU (AT91C_PIO_PB1) ;- SSC Transmit Clock 0 -AT91C_PB1_CTS3 EQU (AT91C_PIO_PB1) ;- USART 3 Clear To Send -AT91C_PIO_PB10 EQU (1:SHL:10) ;- Pin Controlled by PB10 -AT91C_PB10_RK1 EQU (AT91C_PIO_PB10) ;- SSC Receive Clock 1 -AT91C_PB10_TIOA5 EQU (AT91C_PIO_PB10) ;- Timer Counter 5 Multipurpose Timer I/O Pin A -AT91C_PIO_PB11 EQU (1:SHL:11) ;- Pin Controlled by PB11 -AT91C_PB11_RF1 EQU (AT91C_PIO_PB11) ;- SSC Receive Frame Sync 1 -AT91C_PB11_TIOB5 EQU (AT91C_PIO_PB11) ;- Timer Counter 5 Multipurpose Timer I/O Pin B -AT91C_PIO_PB12 EQU (1:SHL:12) ;- Pin Controlled by PB12 -AT91C_PB12_TF2 EQU (AT91C_PIO_PB12) ;- SSC Transmit Frame Sync 2 -AT91C_PB12_ETX2 EQU (AT91C_PIO_PB12) ;- Ethernet MAC Transmit Data 2 -AT91C_PIO_PB13 EQU (1:SHL:13) ;- Pin Controlled by PB13 -AT91C_PB13_TK2 EQU (AT91C_PIO_PB13) ;- SSC Transmit Clock 2 -AT91C_PB13_ETX3 EQU (AT91C_PIO_PB13) ;- Ethernet MAC Transmit Data 3 -AT91C_PIO_PB14 EQU (1:SHL:14) ;- Pin Controlled by PB14 -AT91C_PB14_TD2 EQU (AT91C_PIO_PB14) ;- SSC Transmit Data 2 -AT91C_PB14_ETXER EQU (AT91C_PIO_PB14) ;- Ethernet MAC Transmikt Coding Error -AT91C_PIO_PB15 EQU (1:SHL:15) ;- Pin Controlled by PB15 -AT91C_PB15_RD2 EQU (AT91C_PIO_PB15) ;- SSC Receive Data 2 -AT91C_PB15_ERX2 EQU (AT91C_PIO_PB15) ;- Ethernet MAC Receive Data 2 -AT91C_PIO_PB16 EQU (1:SHL:16) ;- Pin Controlled by PB16 -AT91C_PB16_RK2 EQU (AT91C_PIO_PB16) ;- SSC Receive Clock 2 -AT91C_PB16_ERX3 EQU (AT91C_PIO_PB16) ;- Ethernet MAC Receive Data 3 -AT91C_PIO_PB17 EQU (1:SHL:17) ;- Pin Controlled by PB17 -AT91C_PB17_RF2 EQU (AT91C_PIO_PB17) ;- SSC Receive Frame Sync 2 -AT91C_PB17_ERXDV EQU (AT91C_PIO_PB17) ;- Ethernet MAC Receive Data Valid -AT91C_PIO_PB18 EQU (1:SHL:18) ;- Pin Controlled by PB18 -AT91C_PB18_RI1 EQU (AT91C_PIO_PB18) ;- USART 1 Ring Indicator -AT91C_PB18_ECOL EQU (AT91C_PIO_PB18) ;- Ethernet MAC Collision Detected -AT91C_PIO_PB19 EQU (1:SHL:19) ;- Pin Controlled by PB19 -AT91C_PB19_DTR1 EQU (AT91C_PIO_PB19) ;- USART 1 Data Terminal ready -AT91C_PB19_ERXCK EQU (AT91C_PIO_PB19) ;- Ethernet MAC Receive Clock -AT91C_PIO_PB2 EQU (1:SHL:2) ;- Pin Controlled by PB2 -AT91C_PB2_TD0 EQU (AT91C_PIO_PB2) ;- SSC Transmit data -AT91C_PB2_SCK3 EQU (AT91C_PIO_PB2) ;- USART 3 Serial Clock -AT91C_PIO_PB20 EQU (1:SHL:20) ;- Pin Controlled by PB20 -AT91C_PB20_TXD1 EQU (AT91C_PIO_PB20) ;- USART 1 Transmit Data -AT91C_PIO_PB21 EQU (1:SHL:21) ;- Pin Controlled by PB21 -AT91C_PB21_RXD1 EQU (AT91C_PIO_PB21) ;- USART 1 Receive Data -AT91C_PIO_PB22 EQU (1:SHL:22) ;- Pin Controlled by PB22 -AT91C_PB22_SCK1 EQU (AT91C_PIO_PB22) ;- USART1 Serial Clock -AT91C_PIO_PB23 EQU (1:SHL:23) ;- Pin Controlled by PB23 -AT91C_PB23_DCD1 EQU (AT91C_PIO_PB23) ;- USART 1 Data Carrier Detect -AT91C_PIO_PB24 EQU (1:SHL:24) ;- Pin Controlled by PB24 -AT91C_PB24_CTS1 EQU (AT91C_PIO_PB24) ;- USART 1 Clear To Send -AT91C_PIO_PB25 EQU (1:SHL:25) ;- Pin Controlled by PB25 -AT91C_PB25_DSR1 EQU (AT91C_PIO_PB25) ;- USART 1 Data Set ready -AT91C_PB25_EF100 EQU (AT91C_PIO_PB25) ;- Ethernet MAC Force 100 Mbits/sec -AT91C_PIO_PB26 EQU (1:SHL:26) ;- Pin Controlled by PB26 -AT91C_PB26_RTS1 EQU (AT91C_PIO_PB26) ;- Usart 0 Ready To Send -AT91C_PIO_PB27 EQU (1:SHL:27) ;- Pin Controlled by PB27 -AT91C_PB27_PCK0 EQU (AT91C_PIO_PB27) ;- PMC Programmable Clock Output 0 -AT91C_PIO_PB28 EQU (1:SHL:28) ;- Pin Controlled by PB28 -AT91C_PB28_FIQ EQU (AT91C_PIO_PB28) ;- AIC Fast Interrupt Input -AT91C_PIO_PB29 EQU (1:SHL:29) ;- Pin Controlled by PB29 -AT91C_PB29_IRQ0 EQU (AT91C_PIO_PB29) ;- Interrupt input 0 -AT91C_PIO_PB3 EQU (1:SHL:3) ;- Pin Controlled by PB3 -AT91C_PB3_RD0 EQU (AT91C_PIO_PB3) ;- SSC Receive Data -AT91C_PB3_MCDA1 EQU (AT91C_PIO_PB3) ;- Multimedia Card A Data 1 -AT91C_PIO_PB4 EQU (1:SHL:4) ;- Pin Controlled by PB4 -AT91C_PB4_RK0 EQU (AT91C_PIO_PB4) ;- SSC Receive Clock -AT91C_PB4_MCDA2 EQU (AT91C_PIO_PB4) ;- Multimedia Card A Data 2 -AT91C_PIO_PB5 EQU (1:SHL:5) ;- Pin Controlled by PB5 -AT91C_PB5_RF0 EQU (AT91C_PIO_PB5) ;- SSC Receive Frame Sync 0 -AT91C_PB5_MCDA3 EQU (AT91C_PIO_PB5) ;- Multimedia Card A Data 3 -AT91C_PIO_PB6 EQU (1:SHL:6) ;- Pin Controlled by PB6 -AT91C_PB6_TF1 EQU (AT91C_PIO_PB6) ;- SSC Transmit Frame Sync 1 -AT91C_PB6_TIOA3 EQU (AT91C_PIO_PB6) ;- Timer Counter 4 Multipurpose Timer I/O Pin A -AT91C_PIO_PB7 EQU (1:SHL:7) ;- Pin Controlled by PB7 -AT91C_PB7_TK1 EQU (AT91C_PIO_PB7) ;- SSC Transmit Clock 1 -AT91C_PB7_TIOB3 EQU (AT91C_PIO_PB7) ;- Timer Counter 3 Multipurpose Timer I/O Pin B -AT91C_PIO_PB8 EQU (1:SHL:8) ;- Pin Controlled by PB8 -AT91C_PB8_TD1 EQU (AT91C_PIO_PB8) ;- SSC Transmit Data 1 -AT91C_PB8_TIOA4 EQU (AT91C_PIO_PB8) ;- Timer Counter 4 Multipurpose Timer I/O Pin A -AT91C_PIO_PB9 EQU (1:SHL:9) ;- Pin Controlled by PB9 -AT91C_PB9_RD1 EQU (AT91C_PIO_PB9) ;- SSC Receive Data 1 -AT91C_PB9_TIOB4 EQU (AT91C_PIO_PB9) ;- Timer Counter 4 Multipurpose Timer I/O Pin B -AT91C_PIO_PC0 EQU (1:SHL:0) ;- Pin Controlled by PC0 -AT91C_PC0_BFCK EQU (AT91C_PIO_PC0) ;- Burst Flash Clock -AT91C_PIO_PC1 EQU (1:SHL:1) ;- Pin Controlled by PC1 -AT91C_PC1_BFRDY_SMOE EQU (AT91C_PIO_PC1) ;- Burst Flash Ready -AT91C_PIO_PC10 EQU (1:SHL:10) ;- Pin Controlled by PC10 -AT91C_PC10_NCS4_CFCS EQU (AT91C_PIO_PC10) ;- Compact Flash Chip Select -AT91C_PIO_PC11 EQU (1:SHL:11) ;- Pin Controlled by PC11 -AT91C_PC11_NCS5_CFCE1 EQU (AT91C_PIO_PC11) ;- Chip Select 5 / Compact Flash Chip Enable 1 -AT91C_PIO_PC12 EQU (1:SHL:12) ;- Pin Controlled by PC12 -AT91C_PC12_NCS6_CFCE2 EQU (AT91C_PIO_PC12) ;- Chip Select 6 / Compact Flash Chip Enable 2 -AT91C_PIO_PC13 EQU (1:SHL:13) ;- Pin Controlled by PC13 -AT91C_PC13_NCS7 EQU (AT91C_PIO_PC13) ;- Chip Select 7 -AT91C_PIO_PC14 EQU (1:SHL:14) ;- Pin Controlled by PC14 -AT91C_PIO_PC15 EQU (1:SHL:15) ;- Pin Controlled by PC15 -AT91C_PIO_PC16 EQU (1:SHL:16) ;- Pin Controlled by PC16 -AT91C_PC16_D16 EQU (AT91C_PIO_PC16) ;- Data Bus [16] -AT91C_PIO_PC17 EQU (1:SHL:17) ;- Pin Controlled by PC17 -AT91C_PC17_D17 EQU (AT91C_PIO_PC17) ;- Data Bus [17] -AT91C_PIO_PC18 EQU (1:SHL:18) ;- Pin Controlled by PC18 -AT91C_PC18_D18 EQU (AT91C_PIO_PC18) ;- Data Bus [18] -AT91C_PIO_PC19 EQU (1:SHL:19) ;- Pin Controlled by PC19 -AT91C_PC19_D19 EQU (AT91C_PIO_PC19) ;- Data Bus [19] -AT91C_PIO_PC2 EQU (1:SHL:2) ;- Pin Controlled by PC2 -AT91C_PC2_BFAVD EQU (AT91C_PIO_PC2) ;- Burst Flash Address Valid -AT91C_PIO_PC20 EQU (1:SHL:20) ;- Pin Controlled by PC20 -AT91C_PC20_D20 EQU (AT91C_PIO_PC20) ;- Data Bus [20] -AT91C_PIO_PC21 EQU (1:SHL:21) ;- Pin Controlled by PC21 -AT91C_PC21_D21 EQU (AT91C_PIO_PC21) ;- Data Bus [21] -AT91C_PIO_PC22 EQU (1:SHL:22) ;- Pin Controlled by PC22 -AT91C_PC22_D22 EQU (AT91C_PIO_PC22) ;- Data Bus [22] -AT91C_PIO_PC23 EQU (1:SHL:23) ;- Pin Controlled by PC23 -AT91C_PC23_D23 EQU (AT91C_PIO_PC23) ;- Data Bus [23] -AT91C_PIO_PC24 EQU (1:SHL:24) ;- Pin Controlled by PC24 -AT91C_PC24_D24 EQU (AT91C_PIO_PC24) ;- Data Bus [24] -AT91C_PIO_PC25 EQU (1:SHL:25) ;- Pin Controlled by PC25 -AT91C_PC25_D25 EQU (AT91C_PIO_PC25) ;- Data Bus [25] -AT91C_PIO_PC26 EQU (1:SHL:26) ;- Pin Controlled by PC26 -AT91C_PC26_D26 EQU (AT91C_PIO_PC26) ;- Data Bus [26] -AT91C_PIO_PC27 EQU (1:SHL:27) ;- Pin Controlled by PC27 -AT91C_PC27_D27 EQU (AT91C_PIO_PC27) ;- Data Bus [27] -AT91C_PIO_PC28 EQU (1:SHL:28) ;- Pin Controlled by PC28 -AT91C_PC28_D28 EQU (AT91C_PIO_PC28) ;- Data Bus [28] -AT91C_PIO_PC29 EQU (1:SHL:29) ;- Pin Controlled by PC29 -AT91C_PC29_D29 EQU (AT91C_PIO_PC29) ;- Data Bus [29] -AT91C_PIO_PC3 EQU (1:SHL:3) ;- Pin Controlled by PC3 -AT91C_PC3_BFBAA_SMWE EQU (AT91C_PIO_PC3) ;- Burst Flash Address Advance / SmartMedia Write Enable -AT91C_PIO_PC30 EQU (1:SHL:30) ;- Pin Controlled by PC30 -AT91C_PC30_D30 EQU (AT91C_PIO_PC30) ;- Data Bus [30] -AT91C_PIO_PC31 EQU (1:SHL:31) ;- Pin Controlled by PC31 -AT91C_PC31_D31 EQU (AT91C_PIO_PC31) ;- Data Bus [31] -AT91C_PIO_PC4 EQU (1:SHL:4) ;- Pin Controlled by PC4 -AT91C_PC4_BFOE EQU (AT91C_PIO_PC4) ;- Burst Flash Output Enable -AT91C_PIO_PC5 EQU (1:SHL:5) ;- Pin Controlled by PC5 -AT91C_PC5_BFWE EQU (AT91C_PIO_PC5) ;- Burst Flash Write Enable -AT91C_PIO_PC6 EQU (1:SHL:6) ;- Pin Controlled by PC6 -AT91C_PC6_NWAIT EQU (AT91C_PIO_PC6) ;- NWAIT -AT91C_PIO_PC7 EQU (1:SHL:7) ;- Pin Controlled by PC7 -AT91C_PC7_A23 EQU (AT91C_PIO_PC7) ;- Address Bus[23] -AT91C_PIO_PC8 EQU (1:SHL:8) ;- Pin Controlled by PC8 -AT91C_PC8_A24 EQU (AT91C_PIO_PC8) ;- Address Bus[24] -AT91C_PIO_PC9 EQU (1:SHL:9) ;- Pin Controlled by PC9 -AT91C_PC9_A25_CFRNW EQU (AT91C_PIO_PC9) ;- Address Bus[25] / Compact Flash Read Not Write -AT91C_PIO_PD0 EQU (1:SHL:0) ;- Pin Controlled by PD0 -AT91C_PD0_ETX0 EQU (AT91C_PIO_PD0) ;- Ethernet MAC Transmit Data 0 -AT91C_PIO_PD1 EQU (1:SHL:1) ;- Pin Controlled by PD1 -AT91C_PD1_ETX1 EQU (AT91C_PIO_PD1) ;- Ethernet MAC Transmit Data 1 -AT91C_PIO_PD10 EQU (1:SHL:10) ;- Pin Controlled by PD10 -AT91C_PD10_PCK3 EQU (AT91C_PIO_PD10) ;- PMC Programmable Clock Output 3 -AT91C_PD10_TPS1 EQU (AT91C_PIO_PD10) ;- ETM ARM9 pipeline status 1 -AT91C_PIO_PD11 EQU (1:SHL:11) ;- Pin Controlled by PD11 -AT91C_PD11_ EQU (AT91C_PIO_PD11) ;- -AT91C_PD11_TPS2 EQU (AT91C_PIO_PD11) ;- ETM ARM9 pipeline status 2 -AT91C_PIO_PD12 EQU (1:SHL:12) ;- Pin Controlled by PD12 -AT91C_PD12_ EQU (AT91C_PIO_PD12) ;- -AT91C_PD12_TPK0 EQU (AT91C_PIO_PD12) ;- ETM Trace Packet 0 -AT91C_PIO_PD13 EQU (1:SHL:13) ;- Pin Controlled by PD13 -AT91C_PD13_ EQU (AT91C_PIO_PD13) ;- -AT91C_PD13_TPK1 EQU (AT91C_PIO_PD13) ;- ETM Trace Packet 1 -AT91C_PIO_PD14 EQU (1:SHL:14) ;- Pin Controlled by PD14 -AT91C_PD14_ EQU (AT91C_PIO_PD14) ;- -AT91C_PD14_TPK2 EQU (AT91C_PIO_PD14) ;- ETM Trace Packet 2 -AT91C_PIO_PD15 EQU (1:SHL:15) ;- Pin Controlled by PD15 -AT91C_PD15_TD0 EQU (AT91C_PIO_PD15) ;- SSC Transmit data -AT91C_PD15_TPK3 EQU (AT91C_PIO_PD15) ;- ETM Trace Packet 3 -AT91C_PIO_PD16 EQU (1:SHL:16) ;- Pin Controlled by PD16 -AT91C_PD16_TD1 EQU (AT91C_PIO_PD16) ;- SSC Transmit Data 1 -AT91C_PD16_TPK4 EQU (AT91C_PIO_PD16) ;- ETM Trace Packet 4 -AT91C_PIO_PD17 EQU (1:SHL:17) ;- Pin Controlled by PD17 -AT91C_PD17_TD2 EQU (AT91C_PIO_PD17) ;- SSC Transmit Data 2 -AT91C_PD17_TPK5 EQU (AT91C_PIO_PD17) ;- ETM Trace Packet 5 -AT91C_PIO_PD18 EQU (1:SHL:18) ;- Pin Controlled by PD18 -AT91C_PD18_NPCS1 EQU (AT91C_PIO_PD18) ;- SPI Peripheral Chip Select 1 -AT91C_PD18_TPK6 EQU (AT91C_PIO_PD18) ;- ETM Trace Packet 6 -AT91C_PIO_PD19 EQU (1:SHL:19) ;- Pin Controlled by PD19 -AT91C_PD19_NPCS2 EQU (AT91C_PIO_PD19) ;- SPI Peripheral Chip Select 2 -AT91C_PD19_TPK7 EQU (AT91C_PIO_PD19) ;- ETM Trace Packet 7 -AT91C_PIO_PD2 EQU (1:SHL:2) ;- Pin Controlled by PD2 -AT91C_PD2_ETX2 EQU (AT91C_PIO_PD2) ;- Ethernet MAC Transmit Data 2 -AT91C_PIO_PD20 EQU (1:SHL:20) ;- Pin Controlled by PD20 -AT91C_PD20_NPCS3 EQU (AT91C_PIO_PD20) ;- SPI Peripheral Chip Select 3 -AT91C_PD20_TPK8 EQU (AT91C_PIO_PD20) ;- ETM Trace Packet 8 -AT91C_PIO_PD21 EQU (1:SHL:21) ;- Pin Controlled by PD21 -AT91C_PD21_RTS0 EQU (AT91C_PIO_PD21) ;- Usart 0 Ready To Send -AT91C_PD21_TPK9 EQU (AT91C_PIO_PD21) ;- ETM Trace Packet 9 -AT91C_PIO_PD22 EQU (1:SHL:22) ;- Pin Controlled by PD22 -AT91C_PD22_RTS1 EQU (AT91C_PIO_PD22) ;- Usart 0 Ready To Send -AT91C_PD22_TPK10 EQU (AT91C_PIO_PD22) ;- ETM Trace Packet 10 -AT91C_PIO_PD23 EQU (1:SHL:23) ;- Pin Controlled by PD23 -AT91C_PD23_RTS2 EQU (AT91C_PIO_PD23) ;- USART 2 Ready To Send -AT91C_PD23_TPK11 EQU (AT91C_PIO_PD23) ;- ETM Trace Packet 11 -AT91C_PIO_PD24 EQU (1:SHL:24) ;- Pin Controlled by PD24 -AT91C_PD24_RTS3 EQU (AT91C_PIO_PD24) ;- USART 3 Ready To Send -AT91C_PD24_TPK12 EQU (AT91C_PIO_PD24) ;- ETM Trace Packet 12 -AT91C_PIO_PD25 EQU (1:SHL:25) ;- Pin Controlled by PD25 -AT91C_PD25_DTR1 EQU (AT91C_PIO_PD25) ;- USART 1 Data Terminal ready -AT91C_PD25_TPK13 EQU (AT91C_PIO_PD25) ;- ETM Trace Packet 13 -AT91C_PIO_PD26 EQU (1:SHL:26) ;- Pin Controlled by PD26 -AT91C_PD26_TPK14 EQU (AT91C_PIO_PD26) ;- ETM Trace Packet 14 -AT91C_PIO_PD27 EQU (1:SHL:27) ;- Pin Controlled by PD27 -AT91C_PD27_TPK15 EQU (AT91C_PIO_PD27) ;- ETM Trace Packet 15 -AT91C_PIO_PD3 EQU (1:SHL:3) ;- Pin Controlled by PD3 -AT91C_PD3_ETX3 EQU (AT91C_PIO_PD3) ;- Ethernet MAC Transmit Data 3 -AT91C_PIO_PD4 EQU (1:SHL:4) ;- Pin Controlled by PD4 -AT91C_PD4_ETXEN EQU (AT91C_PIO_PD4) ;- Ethernet MAC Transmit Enable -AT91C_PIO_PD5 EQU (1:SHL:5) ;- Pin Controlled by PD5 -AT91C_PD5_ETXER EQU (AT91C_PIO_PD5) ;- Ethernet MAC Transmikt Coding Error -AT91C_PIO_PD6 EQU (1:SHL:6) ;- Pin Controlled by PD6 -AT91C_PD6_DTXD EQU (AT91C_PIO_PD6) ;- DBGU Debug Transmit Data -AT91C_PIO_PD7 EQU (1:SHL:7) ;- Pin Controlled by PD7 -AT91C_PD7_PCK0 EQU (AT91C_PIO_PD7) ;- PMC Programmable Clock Output 0 -AT91C_PD7_TSYNC EQU (AT91C_PIO_PD7) ;- ETM Synchronization signal -AT91C_PIO_PD8 EQU (1:SHL:8) ;- Pin Controlled by PD8 -AT91C_PD8_PCK1 EQU (AT91C_PIO_PD8) ;- PMC Programmable Clock Output 1 -AT91C_PD8_TCLK EQU (AT91C_PIO_PD8) ;- ETM Trace Clock signal -AT91C_PIO_PD9 EQU (1:SHL:9) ;- Pin Controlled by PD9 -AT91C_PD9_PCK2 EQU (AT91C_PIO_PD9) ;- PMC Programmable Clock 2 -AT91C_PD9_TPS0 EQU (AT91C_PIO_PD9) ;- ETM ARM9 pipeline status 0 - -;- ***************************************************************************** -;- PERIPHERAL ID DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_ID_FIQ EQU ( 0) ;- Advanced Interrupt Controller (FIQ) -AT91C_ID_SYS EQU ( 1) ;- System Peripheral -AT91C_ID_PIOA EQU ( 2) ;- Parallel IO Controller A -AT91C_ID_PIOB EQU ( 3) ;- Parallel IO Controller B -AT91C_ID_PIOC EQU ( 4) ;- Parallel IO Controller C -AT91C_ID_PIOD EQU ( 5) ;- Parallel IO Controller D -AT91C_ID_US0 EQU ( 6) ;- USART 0 -AT91C_ID_US1 EQU ( 7) ;- USART 1 -AT91C_ID_US2 EQU ( 8) ;- USART 2 -AT91C_ID_US3 EQU ( 9) ;- USART 3 -AT91C_ID_MCI EQU (10) ;- Multimedia Card Interface -AT91C_ID_UDP EQU (11) ;- USB Device Port -AT91C_ID_TWI EQU (12) ;- Two-Wire Interface -AT91C_ID_SPI EQU (13) ;- Serial Peripheral Interface -AT91C_ID_SSC0 EQU (14) ;- Serial Synchronous Controller 0 -AT91C_ID_SSC1 EQU (15) ;- Serial Synchronous Controller 1 -AT91C_ID_SSC2 EQU (16) ;- Serial Synchronous Controller 2 -AT91C_ID_TC0 EQU (17) ;- Timer Counter 0 -AT91C_ID_TC1 EQU (18) ;- Timer Counter 1 -AT91C_ID_TC2 EQU (19) ;- Timer Counter 2 -AT91C_ID_TC3 EQU (20) ;- Timer Counter 3 -AT91C_ID_TC4 EQU (21) ;- Timer Counter 4 -AT91C_ID_TC5 EQU (22) ;- Timer Counter 5 -AT91C_ID_UHP EQU (23) ;- USB Host port -AT91C_ID_EMAC EQU (24) ;- Ethernet MAC -AT91C_ID_IRQ0 EQU (25) ;- Advanced Interrupt Controller (IRQ0) -AT91C_ID_IRQ1 EQU (26) ;- Advanced Interrupt Controller (IRQ1) -AT91C_ID_IRQ2 EQU (27) ;- Advanced Interrupt Controller (IRQ2) -AT91C_ID_IRQ3 EQU (28) ;- Advanced Interrupt Controller (IRQ3) -AT91C_ID_IRQ4 EQU (29) ;- Advanced Interrupt Controller (IRQ4) -AT91C_ID_IRQ5 EQU (30) ;- Advanced Interrupt Controller (IRQ5) -AT91C_ID_IRQ6 EQU (31) ;- Advanced Interrupt Controller (IRQ6) - -;- ***************************************************************************** -;- BASE ADDRESS DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_BASE_SYS EQU (0xFFFFF000) ;- (SYS) Base Address -AT91C_BASE_MC EQU (0xFFFFFF00) ;- (MC) Base Address -AT91C_BASE_RTC EQU (0xFFFFFE00) ;- (RTC) Base Address -AT91C_BASE_ST EQU (0xFFFFFD00) ;- (ST) Base Address -AT91C_BASE_PMC EQU (0xFFFFFC00) ;- (PMC) Base Address -AT91C_BASE_CKGR EQU (0xFFFFFC20) ;- (CKGR) Base Address -AT91C_BASE_PIOD EQU (0xFFFFFA00) ;- (PIOD) Base Address -AT91C_BASE_PIOC EQU (0xFFFFF800) ;- (PIOC) Base Address -AT91C_BASE_PIOB EQU (0xFFFFF600) ;- (PIOB) Base Address -AT91C_BASE_PIOA EQU (0xFFFFF400) ;- (PIOA) Base Address -AT91C_BASE_DBGU EQU (0xFFFFF200) ;- (DBGU) Base Address -AT91C_BASE_PDC_DBGU EQU (0xFFFFF300) ;- (PDC_DBGU) Base Address -AT91C_BASE_AIC EQU (0xFFFFF000) ;- (AIC) Base Address -AT91C_BASE_PDC_SPI EQU (0xFFFE0100) ;- (PDC_SPI) Base Address -AT91C_BASE_SPI EQU (0xFFFE0000) ;- (SPI) Base Address -AT91C_BASE_PDC_SSC2 EQU (0xFFFD8100) ;- (PDC_SSC2) Base Address -AT91C_BASE_SSC2 EQU (0xFFFD8000) ;- (SSC2) Base Address -AT91C_BASE_PDC_SSC1 EQU (0xFFFD4100) ;- (PDC_SSC1) Base Address -AT91C_BASE_SSC1 EQU (0xFFFD4000) ;- (SSC1) Base Address -AT91C_BASE_PDC_SSC0 EQU (0xFFFD0100) ;- (PDC_SSC0) Base Address -AT91C_BASE_SSC0 EQU (0xFFFD0000) ;- (SSC0) Base Address -AT91C_BASE_PDC_US3 EQU (0xFFFCC100) ;- (PDC_US3) Base Address -AT91C_BASE_US3 EQU (0xFFFCC000) ;- (US3) Base Address -AT91C_BASE_PDC_US2 EQU (0xFFFC8100) ;- (PDC_US2) Base Address -AT91C_BASE_US2 EQU (0xFFFC8000) ;- (US2) Base Address -AT91C_BASE_PDC_US1 EQU (0xFFFC4100) ;- (PDC_US1) Base Address -AT91C_BASE_US1 EQU (0xFFFC4000) ;- (US1) Base Address -AT91C_BASE_PDC_US0 EQU (0xFFFC0100) ;- (PDC_US0) Base Address -AT91C_BASE_US0 EQU (0xFFFC0000) ;- (US0) Base Address -AT91C_BASE_TWI EQU (0xFFFB8000) ;- (TWI) Base Address -AT91C_BASE_PDC_MCI EQU (0xFFFB4100) ;- (PDC_MCI) Base Address -AT91C_BASE_MCI EQU (0xFFFB4000) ;- (MCI) Base Address -AT91C_BASE_UDP EQU (0xFFFB0000) ;- (UDP) Base Address -AT91C_BASE_TC5 EQU (0xFFFA4080) ;- (TC5) Base Address -AT91C_BASE_TC4 EQU (0xFFFA4040) ;- (TC4) Base Address -AT91C_BASE_TC3 EQU (0xFFFA4000) ;- (TC3) Base Address -AT91C_BASE_TCB1 EQU (0xFFFA4080) ;- (TCB1) Base Address -AT91C_BASE_TC2 EQU (0xFFFA0080) ;- (TC2) Base Address -AT91C_BASE_TC1 EQU (0xFFFA0040) ;- (TC1) Base Address -AT91C_BASE_TC0 EQU (0xFFFA0000) ;- (TC0) Base Address -AT91C_BASE_TCB0 EQU (0xFFFA0000) ;- (TCB0) Base Address -AT91C_BASE_UHP EQU (0x00300000) ;- (UHP) Base Address -AT91C_BASE_EMAC EQU (0xFFFBC000) ;- (EMAC) Base Address -AT91C_BASE_EBI EQU (0xFFFFFF60) ;- (EBI) Base Address -AT91C_BASE_SMC2 EQU (0xFFFFFF70) ;- (SMC2) Base Address -AT91C_BASE_SDRC EQU (0xFFFFFF90) ;- (SDRC) Base Address -AT91C_BASE_BFC EQU (0xFFFFFFC0) ;- (BFC) Base Address - -;- ***************************************************************************** -;- MEMORY MAPPING DEFINITIONS FOR AT91RM9200 -;- ***************************************************************************** -AT91C_ISRAM EQU (0x00200000) ;- Internal SRAM base address -AT91C_ISRAM_SIZE EQU (0x00004000) ;- Internal SRAM size in byte (16 Kbyte) -AT91C_IROM EQU (0x00100000) ;- Internal ROM base address -AT91C_IROM_SIZE EQU (0x00020000) ;- Internal ROM size in byte (128 Kbyte) - - - END diff --git a/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200_inc.h b/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200_inc.h deleted file mode 100644 index dabab01c77..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/include/AT91RM9200_inc.h +++ /dev/null @@ -1,2401 +0,0 @@ -// ---------------------------------------------------------------------------- -// ATMEL Microcontroller Software Support - ROUSSET - -// ---------------------------------------------------------------------------- -// The software is delivered "AS IS" without warranty or condition of any -// kind, either express, implied or statutory. This includes without -// limitation any warranty or condition with respect to merchantability or -// fitness for any particular purpose, or against the infringements of -// intellectual property rights of others. -// ---------------------------------------------------------------------------- -// File Name : AT91RM9200.h -// Object : AT91RM9200 definitions -// Generated : AT91 SW Application Group 11/19/2003 (17:20:51) -// -// CVS Reference : /AT91RM9200.pl/1.16/Fri Feb 07 10:29:51 2003// -// CVS Reference : /SYS_AT91RM9200.pl/1.2/Fri Jan 17 12:44:37 2003// -// CVS Reference : /MC_1760A.pl/1.1/Fri Aug 23 14:38:22 2002// -// CVS Reference : /AIC_1796B.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /PMC_2636A.pl/1.1.1.1/Fri Jun 28 09:36:48 2002// -// CVS Reference : /ST_1763B.pl/1.1/Fri Aug 23 14:41:42 2002// -// CVS Reference : /RTC_1245D.pl/1.2/Fri Jan 31 12:19:06 2003// -// CVS Reference : /PIO_1725D.pl/1.1.1.1/Fri Jun 28 09:36:47 2002// -// CVS Reference : /DBGU_1754A.pl/1.4/Fri Jan 31 12:18:24 2003// -// CVS Reference : /UDP_1765B.pl/1.3/Fri Aug 02 14:45:38 2002// -// CVS Reference : /MCI_1764A.pl/1.2/Thu Nov 14 17:48:24 2002// -// CVS Reference : /US_1739C.pl/1.2/Fri Jul 12 07:49:25 2002// -// CVS Reference : /SPI_AT91RMxxxx.pl/1.3/Tue Nov 26 10:20:29 2002// -// CVS Reference : /SSC_1762A.pl/1.2/Fri Nov 08 13:26:39 2002// -// CVS Reference : /TC_1753B.pl/1.2/Fri Jan 31 12:19:55 2003// -// CVS Reference : /TWI_1761B.pl/1.4/Fri Feb 07 10:30:07 2003// -// CVS Reference : /PDC_1734B.pl/1.2/Thu Nov 21 16:38:23 2002// -// CVS Reference : /UHP_xxxxA.pl/1.1/Mon Jul 22 12:21:58 2002// -// CVS Reference : /EMAC_1794A.pl/1.4/Fri Jan 17 12:11:54 2003// -// CVS Reference : /EBI_1759B.pl/1.10/Fri Jan 17 12:44:29 2003// -// CVS Reference : /SMC_1783A.pl/1.3/Thu Oct 31 14:38:17 2002// -// CVS Reference : /SDRC_1758B.pl/1.2/Thu Oct 03 13:04:41 2002// -// CVS Reference : /BFC_1757B.pl/1.3/Thu Oct 31 14:38:00 2002// -// ---------------------------------------------------------------------------- - -// Hardware register definition - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Peripherals -// ***************************************************************************** - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Memory Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_MC structure *** -#define MC_RCR ( 0) // MC Remap Control Register -#define MC_ASR ( 4) // MC Abort Status Register -#define MC_AASR ( 8) // MC Abort Address Status Register -#define MC_PUIA (16) // MC Protection Unit Area -#define MC_PUP (80) // MC Protection Unit Peripherals -#define MC_PUER (84) // MC Protection Unit Enable Register -// -------- MC_RCR : (MC Offset: 0x0) MC Remap Control Register -------- -#define AT91C_MC_RCB (0x1 << 0) // (MC) Remap Command Bit -// -------- MC_ASR : (MC Offset: 0x4) MC Abort Status Register -------- -#define AT91C_MC_UNDADD (0x1 << 0) // (MC) Undefined Addess Abort Status -#define AT91C_MC_MISADD (0x1 << 1) // (MC) Misaligned Addess Abort Status -#define AT91C_MC_MPU (0x1 << 2) // (MC) Memory protection Unit Abort Status -#define AT91C_MC_ABTSZ (0x3 << 8) // (MC) Abort Size Status -#define AT91C_MC_ABTSZ_BYTE (0x0 << 8) // (MC) Byte -#define AT91C_MC_ABTSZ_HWORD (0x1 << 8) // (MC) Half-word -#define AT91C_MC_ABTSZ_WORD (0x2 << 8) // (MC) Word -#define AT91C_MC_ABTTYP (0x3 << 10) // (MC) Abort Type Status -#define AT91C_MC_ABTTYP_DATAR (0x0 << 10) // (MC) Data Read -#define AT91C_MC_ABTTYP_DATAW (0x1 << 10) // (MC) Data Write -#define AT91C_MC_ABTTYP_FETCH (0x2 << 10) // (MC) Code Fetch -#define AT91C_MC_MST0 (0x1 << 16) // (MC) Master 0 Abort Source -#define AT91C_MC_MST1 (0x1 << 17) // (MC) Master 1 Abort Source -#define AT91C_MC_SVMST0 (0x1 << 24) // (MC) Saved Master 0 Abort Source -#define AT91C_MC_SVMST1 (0x1 << 25) // (MC) Saved Master 1 Abort Source -// -------- MC_PUIA : (MC Offset: 0x10) MC Protection Unit Area -------- -#define AT91C_MC_PROT (0x3 << 0) // (MC) Protection -#define AT91C_MC_PROT_PNAUNA (0x0) // (MC) Privilege: No Access, User: No Access -#define AT91C_MC_PROT_PRWUNA (0x1) // (MC) Privilege: Read/Write, User: No Access -#define AT91C_MC_PROT_PRWURO (0x2) // (MC) Privilege: Read/Write, User: Read Only -#define AT91C_MC_PROT_PRWURW (0x3) // (MC) Privilege: Read/Write, User: Read/Write -#define AT91C_MC_SIZE (0xF << 4) // (MC) Internal Area Size -#define AT91C_MC_SIZE_1KB (0x0 << 4) // (MC) Area size 1KByte -#define AT91C_MC_SIZE_2KB (0x1 << 4) // (MC) Area size 2KByte -#define AT91C_MC_SIZE_4KB (0x2 << 4) // (MC) Area size 4KByte -#define AT91C_MC_SIZE_8KB (0x3 << 4) // (MC) Area size 8KByte -#define AT91C_MC_SIZE_16KB (0x4 << 4) // (MC) Area size 16KByte -#define AT91C_MC_SIZE_32KB (0x5 << 4) // (MC) Area size 32KByte -#define AT91C_MC_SIZE_64KB (0x6 << 4) // (MC) Area size 64KByte -#define AT91C_MC_SIZE_128KB (0x7 << 4) // (MC) Area size 128KByte -#define AT91C_MC_SIZE_256KB (0x8 << 4) // (MC) Area size 256KByte -#define AT91C_MC_SIZE_512KB (0x9 << 4) // (MC) Area size 512KByte -#define AT91C_MC_SIZE_1MB (0xA << 4) // (MC) Area size 1MByte -#define AT91C_MC_SIZE_2MB (0xB << 4) // (MC) Area size 2MByte -#define AT91C_MC_SIZE_4MB (0xC << 4) // (MC) Area size 4MByte -#define AT91C_MC_SIZE_8MB (0xD << 4) // (MC) Area size 8MByte -#define AT91C_MC_SIZE_16MB (0xE << 4) // (MC) Area size 16MByte -#define AT91C_MC_SIZE_64MB (0xF << 4) // (MC) Area size 64MByte -#define AT91C_MC_BA (0x3FFFF << 10) // (MC) Internal Area Base Address -// -------- MC_PUP : (MC Offset: 0x50) MC Protection Unit Peripheral -------- -// -------- MC_PUER : (MC Offset: 0x54) MC Protection Unit Area -------- -#define AT91C_MC_PUEB (0x1 << 0) // (MC) Protection Unit enable Bit - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Real-time Clock Alarm and Parallel Load Interface -// ***************************************************************************** -// *** Register offset in AT91S_RTC structure *** -#define RTC_CR ( 0) // Control Register -#define RTC_MR ( 4) // Mode Register -#define RTC_TIMR ( 8) // Time Register -#define RTC_CALR (12) // Calendar Register -#define RTC_TIMALR (16) // Time Alarm Register -#define RTC_CALALR (20) // Calendar Alarm Register -#define RTC_SR (24) // Status Register -#define RTC_SCCR (28) // Status Clear Command Register -#define RTC_IER (32) // Interrupt Enable Register -#define RTC_IDR (36) // Interrupt Disable Register -#define RTC_IMR (40) // Interrupt Mask Register -#define RTC_VER (44) // Valid Entry Register -// -------- RTC_CR : (RTC Offset: 0x0) RTC Control Register -------- -#define AT91C_RTC_UPDTIM (0x1 << 0) // (RTC) Update Request Time Register -#define AT91C_RTC_UPDCAL (0x1 << 1) // (RTC) Update Request Calendar Register -#define AT91C_RTC_TIMEVSEL (0x3 << 8) // (RTC) Time Event Selection -#define AT91C_RTC_TIMEVSEL_MINUTE (0x0 << 8) // (RTC) Minute change. -#define AT91C_RTC_TIMEVSEL_HOUR (0x1 << 8) // (RTC) Hour change. -#define AT91C_RTC_TIMEVSEL_DAY24 (0x2 << 8) // (RTC) Every day at midnight. -#define AT91C_RTC_TIMEVSEL_DAY12 (0x3 << 8) // (RTC) Every day at noon. -#define AT91C_RTC_CALEVSEL (0x3 << 16) // (RTC) Calendar Event Selection -#define AT91C_RTC_CALEVSEL_WEEK (0x0 << 16) // (RTC) Week change (every Monday at time 00:00:00). -#define AT91C_RTC_CALEVSEL_MONTH (0x1 << 16) // (RTC) Month change (every 01 of each month at time 00:00:00). -#define AT91C_RTC_CALEVSEL_YEAR (0x2 << 16) // (RTC) Year change (every January 1 at time 00:00:00). -// -------- RTC_MR : (RTC Offset: 0x4) RTC Mode Register -------- -#define AT91C_RTC_HRMOD (0x1 << 0) // (RTC) 12-24 hour Mode -// -------- RTC_TIMR : (RTC Offset: 0x8) RTC Time Register -------- -#define AT91C_RTC_SEC (0x7F << 0) // (RTC) Current Second -#define AT91C_RTC_MIN (0x7F << 8) // (RTC) Current Minute -#define AT91C_RTC_HOUR (0x1F << 16) // (RTC) Current Hour -#define AT91C_RTC_AMPM (0x1 << 22) // (RTC) Ante Meridiem, Post Meridiem Indicator -// -------- RTC_CALR : (RTC Offset: 0xc) RTC Calendar Register -------- -#define AT91C_RTC_CENT (0x3F << 0) // (RTC) Current Century -#define AT91C_RTC_YEAR (0xFF << 8) // (RTC) Current Year -#define AT91C_RTC_MONTH (0x1F << 16) // (RTC) Current Month -#define AT91C_RTC_DAY (0x7 << 21) // (RTC) Current Day -#define AT91C_RTC_DATE (0x3F << 24) // (RTC) Current Date -// -------- RTC_TIMALR : (RTC Offset: 0x10) RTC Time Alarm Register -------- -#define AT91C_RTC_SECEN (0x1 << 7) // (RTC) Second Alarm Enable -#define AT91C_RTC_MINEN (0x1 << 15) // (RTC) Minute Alarm -#define AT91C_RTC_HOUREN (0x1 << 23) // (RTC) Current Hour -// -------- RTC_CALALR : (RTC Offset: 0x14) RTC Calendar Alarm Register -------- -#define AT91C_RTC_MONTHEN (0x1 << 23) // (RTC) Month Alarm Enable -#define AT91C_RTC_DATEEN (0x1 << 31) // (RTC) Date Alarm Enable -// -------- RTC_SR : (RTC Offset: 0x18) RTC Status Register -------- -#define AT91C_RTC_ACKUPD (0x1 << 0) // (RTC) Acknowledge for Update -#define AT91C_RTC_ALARM (0x1 << 1) // (RTC) Alarm Flag -#define AT91C_RTC_SECEV (0x1 << 2) // (RTC) Second Event -#define AT91C_RTC_TIMEV (0x1 << 3) // (RTC) Time Event -#define AT91C_RTC_CALEV (0x1 << 4) // (RTC) Calendar event -// -------- RTC_SCCR : (RTC Offset: 0x1c) RTC Status Clear Command Register -------- -// -------- RTC_IER : (RTC Offset: 0x20) RTC Interrupt Enable Register -------- -// -------- RTC_IDR : (RTC Offset: 0x24) RTC Interrupt Disable Register -------- -// -------- RTC_IMR : (RTC Offset: 0x28) RTC Interrupt Mask Register -------- -// -------- RTC_VER : (RTC Offset: 0x2c) RTC Valid Entry Register -------- -#define AT91C_RTC_NVTIM (0x1 << 0) // (RTC) Non valid Time -#define AT91C_RTC_NVCAL (0x1 << 1) // (RTC) Non valid Calendar -#define AT91C_RTC_NVTIMALR (0x1 << 2) // (RTC) Non valid time Alarm -#define AT91C_RTC_NVCALALR (0x1 << 3) // (RTC) Nonvalid Calendar Alarm - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR System Timer Interface -// ***************************************************************************** -// *** Register offset in AT91S_ST structure *** -#define ST_CR ( 0) // Control Register -#define ST_PIMR ( 4) // Period Interval Mode Register -#define ST_WDMR ( 8) // Watchdog Mode Register -#define ST_RTMR (12) // Real-time Mode Register -#define ST_SR (16) // Status Register -#define ST_IER (20) // Interrupt Enable Register -#define ST_IDR (24) // Interrupt Disable Register -#define ST_IMR (28) // Interrupt Mask Register -#define ST_RTAR (32) // Real-time Alarm Register -#define ST_CRTR (36) // Current Real-time Register -// -------- ST_CR : (ST Offset: 0x0) System Timer Control Register -------- -#define AT91C_ST_WDRST (0x1 << 0) // (ST) Watchdog Timer Restart -// -------- ST_PIMR : (ST Offset: 0x4) System Timer Period Interval Mode Register -------- -#define AT91C_ST_PIV (0xFFFF << 0) // (ST) Watchdog Timer Restart -// -------- ST_WDMR : (ST Offset: 0x8) System Timer Watchdog Mode Register -------- -#define AT91C_ST_WDV (0xFFFF << 0) // (ST) Watchdog Timer Restart -#define AT91C_ST_RSTEN (0x1 << 16) // (ST) Reset Enable -#define AT91C_ST_EXTEN (0x1 << 17) // (ST) External Signal Assertion Enable -// -------- ST_RTMR : (ST Offset: 0xc) System Timer Real-time Mode Register -------- -#define AT91C_ST_RTPRES (0xFFFF << 0) // (ST) Real-time Timer Prescaler Value -// -------- ST_SR : (ST Offset: 0x10) System Timer Status Register -------- -#define AT91C_ST_PITS (0x1 << 0) // (ST) Period Interval Timer Interrupt -#define AT91C_ST_WDOVF (0x1 << 1) // (ST) Watchdog Overflow -#define AT91C_ST_RTTINC (0x1 << 2) // (ST) Real-time Timer Increment -#define AT91C_ST_ALMS (0x1 << 3) // (ST) Alarm Status -// -------- ST_IER : (ST Offset: 0x14) System Timer Interrupt Enable Register -------- -// -------- ST_IDR : (ST Offset: 0x18) System Timer Interrupt Disable Register -------- -// -------- ST_IMR : (ST Offset: 0x1c) System Timer Interrupt Mask Register -------- -// -------- ST_RTAR : (ST Offset: 0x20) System Timer Real-time Alarm Register -------- -#define AT91C_ST_ALMV (0xFFFFF << 0) // (ST) Alarm Value Value -// -------- ST_CRTR : (ST Offset: 0x24) System Timer Current Real-time Register -------- -#define AT91C_ST_CRTV (0xFFFFF << 0) // (ST) Current Real-time Value - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Power Management Controler -// ***************************************************************************** -// *** Register offset in AT91S_PMC structure *** -#define PMC_SCER ( 0) // System Clock Enable Register -#define PMC_SCDR ( 4) // System Clock Disable Register -#define PMC_SCSR ( 8) // System Clock Status Register -#define PMC_PCER (16) // Peripheral Clock Enable Register -#define PMC_PCDR (20) // Peripheral Clock Disable Register -#define PMC_PCSR (24) // Peripheral Clock Status Register -#define PMC_MCKR (48) // Master Clock Register -#define PMC_PCKR (64) // Programmable Clock Register -#define PMC_IER (96) // Interrupt Enable Register -#define PMC_IDR (100) // Interrupt Disable Register -#define PMC_SR (104) // Status Register -#define PMC_IMR (108) // Interrupt Mask Register -// -------- PMC_SCER : (PMC Offset: 0x0) System Clock Enable Register -------- -#define AT91C_PMC_PCK (0x1 << 0) // (PMC) Processor Clock -#define AT91C_PMC_UDP (0x1 << 1) // (PMC) USB Device Port Clock -#define AT91C_PMC_MCKUDP (0x1 << 2) // (PMC) USB Device Port Master Clock Automatic Disable on Suspend -#define AT91C_PMC_UHP (0x1 << 4) // (PMC) USB Host Port Clock -#define AT91C_PMC_PCK0 (0x1 << 8) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK1 (0x1 << 9) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK2 (0x1 << 10) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK3 (0x1 << 11) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK4 (0x1 << 12) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK5 (0x1 << 13) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK6 (0x1 << 14) // (PMC) Programmable Clock Output -#define AT91C_PMC_PCK7 (0x1 << 15) // (PMC) Programmable Clock Output -// -------- PMC_SCDR : (PMC Offset: 0x4) System Clock Disable Register -------- -// -------- PMC_SCSR : (PMC Offset: 0x8) System Clock Status Register -------- -// -------- PMC_MCKR : (PMC Offset: 0x30) Master Clock Register -------- -#define AT91C_PMC_CSS (0x3 << 0) // (PMC) Programmable Clock Selection -#define AT91C_PMC_CSS_SLOW_CLK (0x0) // (PMC) Slow Clock is selected -#define AT91C_PMC_CSS_MAIN_CLK (0x1) // (PMC) Main Clock is selected -#define AT91C_PMC_CSS_PLLA_CLK (0x2) // (PMC) Clock from PLL A is selected -#define AT91C_PMC_CSS_PLLB_CLK (0x3) // (PMC) Clock from PLL B is selected -#define AT91C_PMC_PRES (0x7 << 2) // (PMC) Programmable Clock Prescaler -#define AT91C_PMC_PRES_CLK (0x0 << 2) // (PMC) Selected clock -#define AT91C_PMC_PRES_CLK_2 (0x1 << 2) // (PMC) Selected clock divided by 2 -#define AT91C_PMC_PRES_CLK_4 (0x2 << 2) // (PMC) Selected clock divided by 4 -#define AT91C_PMC_PRES_CLK_8 (0x3 << 2) // (PMC) Selected clock divided by 8 -#define AT91C_PMC_PRES_CLK_16 (0x4 << 2) // (PMC) Selected clock divided by 16 -#define AT91C_PMC_PRES_CLK_32 (0x5 << 2) // (PMC) Selected clock divided by 32 -#define AT91C_PMC_PRES_CLK_64 (0x6 << 2) // (PMC) Selected clock divided by 64 -#define AT91C_PMC_MDIV (0x3 << 8) // (PMC) Master Clock Division -#define AT91C_PMC_MDIV_1 (0x0 << 8) // (PMC) The master clock and the processor clock are the same -#define AT91C_PMC_MDIV_2 (0x1 << 8) // (PMC) The processor clock is twice as fast as the master clock -#define AT91C_PMC_MDIV_3 (0x2 << 8) // (PMC) The processor clock is three times faster than the master clock -#define AT91C_PMC_MDIV_4 (0x3 << 8) // (PMC) The processor clock is four times faster than the master clock -// -------- PMC_PCKR : (PMC Offset: 0x40) Programmable Clock Register -------- -// -------- PMC_IER : (PMC Offset: 0x60) PMC Interrupt Enable Register -------- -#define AT91C_PMC_MOSCS (0x1 << 0) // (PMC) MOSC Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKA (0x1 << 1) // (PMC) PLL A Status/Enable/Disable/Mask -#define AT91C_PMC_LOCKB (0x1 << 2) // (PMC) PLL B Status/Enable/Disable/Mask -#define AT91C_PMC_MCKRDY (0x1 << 3) // (PMC) MCK_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK0RDY (0x1 << 8) // (PMC) PCK0_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK1RDY (0x1 << 9) // (PMC) PCK1_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK2RDY (0x1 << 10) // (PMC) PCK2_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK3RDY (0x1 << 11) // (PMC) PCK3_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK4RDY (0x1 << 12) // (PMC) PCK4_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK5RDY (0x1 << 13) // (PMC) PCK5_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK6RDY (0x1 << 14) // (PMC) PCK6_RDY Status/Enable/Disable/Mask -#define AT91C_PMC_PCK7RDY (0x1 << 15) // (PMC) PCK7_RDY Status/Enable/Disable/Mask -// -------- PMC_IDR : (PMC Offset: 0x64) PMC Interrupt Disable Register -------- -// -------- PMC_SR : (PMC Offset: 0x68) PMC Status Register -------- -// -------- PMC_IMR : (PMC Offset: 0x6c) PMC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Clock Generator Controler -// ***************************************************************************** -// *** Register offset in AT91S_CKGR structure *** -#define CKGR_MOR ( 0) // Main Oscillator Register -#define CKGR_MCFR ( 4) // Main Clock Frequency Register -#define CKGR_PLLAR ( 8) // PLL A Register -#define CKGR_PLLBR (12) // PLL B Register -// -------- CKGR_MOR : (CKGR Offset: 0x0) Main Oscillator Register -------- -#define AT91C_CKGR_MOSCEN (0x1 << 0) // (CKGR) Main Oscillator Enable -#define AT91C_CKGR_OSCTEST (0x1 << 1) // (CKGR) Oscillator Test -#define AT91C_CKGR_OSCOUNT (0xFF << 8) // (CKGR) Main Oscillator Start-up Time -// -------- CKGR_MCFR : (CKGR Offset: 0x4) Main Clock Frequency Register -------- -#define AT91C_CKGR_MAINF (0xFFFF << 0) // (CKGR) Main Clock Frequency -#define AT91C_CKGR_MAINRDY (0x1 << 16) // (CKGR) Main Clock Ready -// -------- CKGR_PLLAR : (CKGR Offset: 0x8) PLL A Register -------- -#define AT91C_CKGR_DIVA (0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVA_0 (0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVA_BYPASS (0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLACOUNT (0x3F << 8) // (CKGR) PLL A Counter -#define AT91C_CKGR_OUTA (0x3 << 14) // (CKGR) PLL A Output Frequency Range -#define AT91C_CKGR_OUTA_0 (0x0 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_1 (0x1 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_2 (0x2 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_OUTA_3 (0x3 << 14) // (CKGR) Please refer to the PLLA datasheet -#define AT91C_CKGR_MULA (0x7FF << 16) // (CKGR) PLL A Multiplier -#define AT91C_CKGR_SRCA (0x1 << 29) // (CKGR) PLL A Source -// -------- CKGR_PLLBR : (CKGR Offset: 0xc) PLL B Register -------- -#define AT91C_CKGR_DIVB (0xFF << 0) // (CKGR) Divider Selected -#define AT91C_CKGR_DIVB_0 (0x0) // (CKGR) Divider output is 0 -#define AT91C_CKGR_DIVB_BYPASS (0x1) // (CKGR) Divider is bypassed -#define AT91C_CKGR_PLLBCOUNT (0x3F << 8) // (CKGR) PLL B Counter -#define AT91C_CKGR_OUTB (0x3 << 14) // (CKGR) PLL B Output Frequency Range -#define AT91C_CKGR_OUTB_0 (0x0 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_1 (0x1 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_2 (0x2 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_OUTB_3 (0x3 << 14) // (CKGR) Please refer to the PLLB datasheet -#define AT91C_CKGR_MULB (0x7FF << 16) // (CKGR) PLL B Multiplier -#define AT91C_CKGR_USB_96M (0x1 << 28) // (CKGR) Divider for USB Ports -#define AT91C_CKGR_USB_PLL (0x1 << 29) // (CKGR) PLL Use - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Parallel Input Output Controler -// ***************************************************************************** -// *** Register offset in AT91S_PIO structure *** -#define PIO_PER ( 0) // PIO Enable Register -#define PIO_PDR ( 4) // PIO Disable Register -#define PIO_PSR ( 8) // PIO Status Register -#define PIO_OER (16) // Output Enable Register -#define PIO_ODR (20) // Output Disable Registerr -#define PIO_OSR (24) // Output Status Register -#define PIO_IFER (32) // Input Filter Enable Register -#define PIO_IFDR (36) // Input Filter Disable Register -#define PIO_IFSR (40) // Input Filter Status Register -#define PIO_SODR (48) // Set Output Data Register -#define PIO_CODR (52) // Clear Output Data Register -#define PIO_ODSR (56) // Output Data Status Register -#define PIO_PDSR (60) // Pin Data Status Register -#define PIO_IER (64) // Interrupt Enable Register -#define PIO_IDR (68) // Interrupt Disable Register -#define PIO_IMR (72) // Interrupt Mask Register -#define PIO_ISR (76) // Interrupt Status Register -#define PIO_MDER (80) // Multi-driver Enable Register -#define PIO_MDDR (84) // Multi-driver Disable Register -#define PIO_MDSR (88) // Multi-driver Status Register -#define PIO_PPUDR (96) // Pull-up Disable Register -#define PIO_PPUER (100) // Pull-up Enable Register -#define PIO_PPUSR (104) // Pad Pull-up Status Register -#define PIO_ASR (112) // Select A Register -#define PIO_BSR (116) // Select B Register -#define PIO_ABSR (120) // AB Select Status Register -#define PIO_OWER (160) // Output Write Enable Register -#define PIO_OWDR (164) // Output Write Disable Register -#define PIO_OWSR (168) // Output Write Status Register - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Debug Unit -// ***************************************************************************** -// *** Register offset in AT91S_DBGU structure *** -#define DBGU_CR ( 0) // Control Register -#define DBGU_MR ( 4) // Mode Register -#define DBGU_IER ( 8) // Interrupt Enable Register -#define DBGU_IDR (12) // Interrupt Disable Register -#define DBGU_IMR (16) // Interrupt Mask Register -#define DBGU_CSR (20) // Channel Status Register -#define DBGU_RHR (24) // Receiver Holding Register -#define DBGU_THR (28) // Transmitter Holding Register -#define DBGU_BRGR (32) // Baud Rate Generator Register -#define DBGU_C1R (64) // Chip ID1 Register -#define DBGU_C2R (68) // Chip ID2 Register -#define DBGU_FNTR (72) // Force NTRST Register -#define DBGU_RPR (256) // Receive Pointer Register -#define DBGU_RCR (260) // Receive Counter Register -#define DBGU_TPR (264) // Transmit Pointer Register -#define DBGU_TCR (268) // Transmit Counter Register -#define DBGU_RNPR (272) // Receive Next Pointer Register -#define DBGU_RNCR (276) // Receive Next Counter Register -#define DBGU_TNPR (280) // Transmit Next Pointer Register -#define DBGU_TNCR (284) // Transmit Next Counter Register -#define DBGU_PTCR (288) // PDC Transfer Control Register -#define DBGU_PTSR (292) // PDC Transfer Status Register -// -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTRX (0x1 << 2) // (DBGU) Reset Receiver -#define AT91C_US_RSTTX (0x1 << 3) // (DBGU) Reset Transmitter -#define AT91C_US_RXEN (0x1 << 4) // (DBGU) Receiver Enable -#define AT91C_US_RXDIS (0x1 << 5) // (DBGU) Receiver Disable -#define AT91C_US_TXEN (0x1 << 6) // (DBGU) Transmitter Enable -#define AT91C_US_TXDIS (0x1 << 7) // (DBGU) Transmitter Disable -// -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_PAR (0x7 << 9) // (DBGU) Parity type -#define AT91C_US_PAR_EVEN (0x0 << 9) // (DBGU) Even Parity -#define AT91C_US_PAR_ODD (0x1 << 9) // (DBGU) Odd Parity -#define AT91C_US_PAR_SPACE (0x2 << 9) // (DBGU) Parity forced to 0 (Space) -#define AT91C_US_PAR_MARK (0x3 << 9) // (DBGU) Parity forced to 1 (Mark) -#define AT91C_US_PAR_NONE (0x4 << 9) // (DBGU) No Parity -#define AT91C_US_PAR_MULTI_DROP (0x6 << 9) // (DBGU) Multi-drop mode -#define AT91C_US_CHMODE (0x3 << 14) // (DBGU) Channel Mode -#define AT91C_US_CHMODE_NORMAL (0x0 << 14) // (DBGU) Normal Mode: The USART channel operates as an RX/TX USART. -#define AT91C_US_CHMODE_AUTO (0x1 << 14) // (DBGU) Automatic Echo: Receiver Data Input is connected to the TXD pin. -#define AT91C_US_CHMODE_LOCAL (0x2 << 14) // (DBGU) Local Loopback: Transmitter Output Signal is connected to Receiver Input Signal. -#define AT91C_US_CHMODE_REMOTE (0x3 << 14) // (DBGU) Remote Loopback: RXD pin is internally connected to TXD pin. -// -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXRDY (0x1 << 0) // (DBGU) RXRDY Interrupt -#define AT91C_US_TXRDY (0x1 << 1) // (DBGU) TXRDY Interrupt -#define AT91C_US_ENDRX (0x1 << 3) // (DBGU) End of Receive Transfer Interrupt -#define AT91C_US_ENDTX (0x1 << 4) // (DBGU) End of Transmit Interrupt -#define AT91C_US_OVRE (0x1 << 5) // (DBGU) Overrun Interrupt -#define AT91C_US_FRAME (0x1 << 6) // (DBGU) Framing Error Interrupt -#define AT91C_US_PARE (0x1 << 7) // (DBGU) Parity Error Interrupt -#define AT91C_US_TXEMPTY (0x1 << 9) // (DBGU) TXEMPTY Interrupt -#define AT91C_US_TXBUFE (0x1 << 11) // (DBGU) TXBUFE Interrupt -#define AT91C_US_RXBUFF (0x1 << 12) // (DBGU) RXBUFF Interrupt -#define AT91C_US_COMM_TX (0x1 << 30) // (DBGU) COMM_TX Interrupt -#define AT91C_US_COMM_RX (0x1 << 31) // (DBGU) COMM_RX Interrupt -// -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- DBGU_CSR : (DBGU Offset: 0x14) Debug Unit Channel Status Register -------- -// -------- DBGU_FNTR : (DBGU Offset: 0x48) Debug Unit FORCE_NTRST Register -------- -#define AT91C_US_FORCE_NTRST (0x1 << 0) // (DBGU) Force NTRST in JTAG - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Peripheral Data Controller -// ***************************************************************************** -// *** Register offset in AT91S_PDC structure *** -#define PDC_RPR ( 0) // Receive Pointer Register -#define PDC_RCR ( 4) // Receive Counter Register -#define PDC_TPR ( 8) // Transmit Pointer Register -#define PDC_TCR (12) // Transmit Counter Register -#define PDC_RNPR (16) // Receive Next Pointer Register -#define PDC_RNCR (20) // Receive Next Counter Register -#define PDC_TNPR (24) // Transmit Next Pointer Register -#define PDC_TNCR (28) // Transmit Next Counter Register -#define PDC_PTCR (32) // PDC Transfer Control Register -#define PDC_PTSR (36) // PDC Transfer Status Register -// -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- -#define AT91C_PDC_RXTEN (0x1 << 0) // (PDC) Receiver Transfer Enable -#define AT91C_PDC_RXTDIS (0x1 << 1) // (PDC) Receiver Transfer Disable -#define AT91C_PDC_TXTEN (0x1 << 8) // (PDC) Transmitter Transfer Enable -#define AT91C_PDC_TXTDIS (0x1 << 9) // (PDC) Transmitter Transfer Disable -// -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Advanced Interrupt Controller -// ***************************************************************************** -// *** Register offset in AT91S_AIC structure *** -#define AIC_SMR ( 0) // Source Mode Register -#define AIC_SVR (128) // Source Vector Register -#define AIC_IVR (256) // IRQ Vector Register -#define AIC_FVR (260) // FIQ Vector Register -#define AIC_ISR (264) // Interrupt Status Register -#define AIC_IPR (268) // Interrupt Pending Register -#define AIC_IMR (272) // Interrupt Mask Register -#define AIC_CISR (276) // Core Interrupt Status Register -#define AIC_IECR (288) // Interrupt Enable Command Register -#define AIC_IDCR (292) // Interrupt Disable Command Register -#define AIC_ICCR (296) // Interrupt Clear Command Register -#define AIC_ISCR (300) // Interrupt Set Command Register -#define AIC_EOICR (304) // End of Interrupt Command Register -#define AIC_SPU (308) // Spurious Vector Register -#define AIC_DCR (312) // Debug Control Register (Protect) -#define AIC_FFER (320) // Fast Forcing Enable Register -#define AIC_FFDR (324) // Fast Forcing Disable Register -#define AIC_FFSR (328) // Fast Forcing Status Register -// -------- AIC_SMR : (AIC Offset: 0x0) Control Register -------- -#define AT91C_AIC_PRIOR (0x7 << 0) // (AIC) Priority Level -#define AT91C_AIC_PRIOR_LOWEST (0x0) // (AIC) Lowest priority level -#define AT91C_AIC_PRIOR_HIGHEST (0x7) // (AIC) Highest priority level -#define AT91C_AIC_SRCTYPE (0x3 << 5) // (AIC) Interrupt Source Type -#define AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE (0x0 << 5) // (AIC) Internal Sources Code Label Level Sensitive -#define AT91C_AIC_SRCTYPE_INT_EDGE_TRIGGERED (0x1 << 5) // (AIC) Internal Sources Code Label Edge triggered -#define AT91C_AIC_SRCTYPE_EXT_HIGH_LEVEL (0x2 << 5) // (AIC) External Sources Code Label High-level Sensitive -#define AT91C_AIC_SRCTYPE_EXT_POSITIVE_EDGE (0x3 << 5) // (AIC) External Sources Code Label Positive Edge triggered -// -------- AIC_CISR : (AIC Offset: 0x114) AIC Core Interrupt Status Register -------- -#define AT91C_AIC_NFIQ (0x1 << 0) // (AIC) NFIQ Status -#define AT91C_AIC_NIRQ (0x1 << 1) // (AIC) NIRQ Status -// -------- AIC_DCR : (AIC Offset: 0x138) AIC Debug Control Register (Protect) -------- -#define AT91C_AIC_DCR_PROT (0x1 << 0) // (AIC) Protection Mode -#define AT91C_AIC_DCR_GMSK (0x1 << 1) // (AIC) General Mask - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Serial Parallel Interface -// ***************************************************************************** -// *** Register offset in AT91S_SPI structure *** -#define SPI_CR ( 0) // Control Register -#define SPI_MR ( 4) // Mode Register -#define SPI_RDR ( 8) // Receive Data Register -#define SPI_TDR (12) // Transmit Data Register -#define SPI_SR (16) // Status Register -#define SPI_IER (20) // Interrupt Enable Register -#define SPI_IDR (24) // Interrupt Disable Register -#define SPI_IMR (28) // Interrupt Mask Register -#define SPI_CSR (48) // Chip Select Register -#define SPI_RPR (256) // Receive Pointer Register -#define SPI_RCR (260) // Receive Counter Register -#define SPI_TPR (264) // Transmit Pointer Register -#define SPI_TCR (268) // Transmit Counter Register -#define SPI_RNPR (272) // Receive Next Pointer Register -#define SPI_RNCR (276) // Receive Next Counter Register -#define SPI_TNPR (280) // Transmit Next Pointer Register -#define SPI_TNCR (284) // Transmit Next Counter Register -#define SPI_PTCR (288) // PDC Transfer Control Register -#define SPI_PTSR (292) // PDC Transfer Status Register -// -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- -#define AT91C_SPI_SPIEN (0x1 << 0) // (SPI) SPI Enable -#define AT91C_SPI_SPIDIS (0x1 << 1) // (SPI) SPI Disable -#define AT91C_SPI_SWRST (0x1 << 7) // (SPI) SPI Software reset -// -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- -#define AT91C_SPI_MSTR (0x1 << 0) // (SPI) Master/Slave Mode -#define AT91C_SPI_PS (0x1 << 1) // (SPI) Peripheral Select -#define AT91C_SPI_PS_FIXED (0x0 << 1) // (SPI) Fixed Peripheral Select -#define AT91C_SPI_PS_VARIABLE (0x1 << 1) // (SPI) Variable Peripheral Select -#define AT91C_SPI_PCSDEC (0x1 << 2) // (SPI) Chip Select Decode -#define AT91C_SPI_DIV32 (0x1 << 3) // (SPI) Clock Selection -#define AT91C_SPI_MODFDIS (0x1 << 4) // (SPI) Mode Fault Detection -#define AT91C_SPI_LLB (0x1 << 7) // (SPI) Clock Selection -#define AT91C_SPI_PCS (0xF << 16) // (SPI) Peripheral Chip Select -#define AT91C_SPI_DLYBCS (0xFF << 24) // (SPI) Delay Between Chip Selects -// -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- -#define AT91C_SPI_RD (0xFFFF << 0) // (SPI) Receive Data -#define AT91C_SPI_RPCS (0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- -#define AT91C_SPI_TD (0xFFFF << 0) // (SPI) Transmit Data -#define AT91C_SPI_TPCS (0xF << 16) // (SPI) Peripheral Chip Select Status -// -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- -#define AT91C_SPI_RDRF (0x1 << 0) // (SPI) Receive Data Register Full -#define AT91C_SPI_TDRE (0x1 << 1) // (SPI) Transmit Data Register Empty -#define AT91C_SPI_MODF (0x1 << 2) // (SPI) Mode Fault Error -#define AT91C_SPI_OVRES (0x1 << 3) // (SPI) Overrun Error Status -#define AT91C_SPI_SPENDRX (0x1 << 4) // (SPI) End of Receiver Transfer -#define AT91C_SPI_SPENDTX (0x1 << 5) // (SPI) End of Receiver Transfer -#define AT91C_SPI_RXBUFF (0x1 << 6) // (SPI) RXBUFF Interrupt -#define AT91C_SPI_TXBUFE (0x1 << 7) // (SPI) TXBUFE Interrupt -#define AT91C_SPI_SPIENS (0x1 << 16) // (SPI) Enable Status -// -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- -// -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- -// -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- -// -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- -#define AT91C_SPI_CPOL (0x1 << 0) // (SPI) Clock Polarity -#define AT91C_SPI_NCPHA (0x1 << 1) // (SPI) Clock Phase -#define AT91C_SPI_BITS (0xF << 4) // (SPI) Bits Per Transfer -#define AT91C_SPI_BITS_8 (0x0 << 4) // (SPI) 8 Bits Per transfer -#define AT91C_SPI_BITS_9 (0x1 << 4) // (SPI) 9 Bits Per transfer -#define AT91C_SPI_BITS_10 (0x2 << 4) // (SPI) 10 Bits Per transfer -#define AT91C_SPI_BITS_11 (0x3 << 4) // (SPI) 11 Bits Per transfer -#define AT91C_SPI_BITS_12 (0x4 << 4) // (SPI) 12 Bits Per transfer -#define AT91C_SPI_BITS_13 (0x5 << 4) // (SPI) 13 Bits Per transfer -#define AT91C_SPI_BITS_14 (0x6 << 4) // (SPI) 14 Bits Per transfer -#define AT91C_SPI_BITS_15 (0x7 << 4) // (SPI) 15 Bits Per transfer -#define AT91C_SPI_BITS_16 (0x8 << 4) // (SPI) 16 Bits Per transfer -#define AT91C_SPI_SCBR (0xFF << 8) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBS (0xFF << 16) // (SPI) Serial Clock Baud Rate -#define AT91C_SPI_DLYBCT (0xFF << 24) // (SPI) Delay Between Consecutive Transfers - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Synchronous Serial Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_SSC structure *** -#define SSC_CR ( 0) // Control Register -#define SSC_CMR ( 4) // Clock Mode Register -#define SSC_RCMR (16) // Receive Clock ModeRegister -#define SSC_RFMR (20) // Receive Frame Mode Register -#define SSC_TCMR (24) // Transmit Clock Mode Register -#define SSC_TFMR (28) // Transmit Frame Mode Register -#define SSC_RHR (32) // Receive Holding Register -#define SSC_THR (36) // Transmit Holding Register -#define SSC_RSHR (48) // Receive Sync Holding Register -#define SSC_TSHR (52) // Transmit Sync Holding Register -#define SSC_RC0R (56) // Receive Compare 0 Register -#define SSC_RC1R (60) // Receive Compare 1 Register -#define SSC_SR (64) // Status Register -#define SSC_IER (68) // Interrupt Enable Register -#define SSC_IDR (72) // Interrupt Disable Register -#define SSC_IMR (76) // Interrupt Mask Register -#define SSC_RPR (256) // Receive Pointer Register -#define SSC_RCR (260) // Receive Counter Register -#define SSC_TPR (264) // Transmit Pointer Register -#define SSC_TCR (268) // Transmit Counter Register -#define SSC_RNPR (272) // Receive Next Pointer Register -#define SSC_RNCR (276) // Receive Next Counter Register -#define SSC_TNPR (280) // Transmit Next Pointer Register -#define SSC_TNCR (284) // Transmit Next Counter Register -#define SSC_PTCR (288) // PDC Transfer Control Register -#define SSC_PTSR (292) // PDC Transfer Status Register -// -------- SSC_CR : (SSC Offset: 0x0) SSC Control Register -------- -#define AT91C_SSC_RXEN (0x1 << 0) // (SSC) Receive Enable -#define AT91C_SSC_RXDIS (0x1 << 1) // (SSC) Receive Disable -#define AT91C_SSC_TXEN (0x1 << 8) // (SSC) Transmit Enable -#define AT91C_SSC_TXDIS (0x1 << 9) // (SSC) Transmit Disable -#define AT91C_SSC_SWRST (0x1 << 15) // (SSC) Software Reset -// -------- SSC_RCMR : (SSC Offset: 0x10) SSC Receive Clock Mode Register -------- -#define AT91C_SSC_CKS (0x3 << 0) // (SSC) Receive/Transmit Clock Selection -#define AT91C_SSC_CKS_DIV (0x0) // (SSC) Divided Clock -#define AT91C_SSC_CKS_TK (0x1) // (SSC) TK Clock signal -#define AT91C_SSC_CKS_RK (0x2) // (SSC) RK pin -#define AT91C_SSC_CKO (0x7 << 2) // (SSC) Receive/Transmit Clock Output Mode Selection -#define AT91C_SSC_CKO_NONE (0x0 << 2) // (SSC) Receive/Transmit Clock Output Mode: None RK pin: Input-only -#define AT91C_SSC_CKO_CONTINOUS (0x1 << 2) // (SSC) Continuous Receive/Transmit Clock RK pin: Output -#define AT91C_SSC_CKO_DATA_TX (0x2 << 2) // (SSC) Receive/Transmit Clock only during data transfers RK pin: Output -#define AT91C_SSC_CKI (0x1 << 5) // (SSC) Receive/Transmit Clock Inversion -#define AT91C_SSC_CKG (0x3 << 6) // (SSC) Receive/Transmit Clock Gating Selection -#define AT91C_SSC_CKG_NONE (0x0 << 6) // (SSC) Receive/Transmit Clock Gating: None, continuous clock -#define AT91C_SSC_CKG_LOW (0x1 << 6) // (SSC) Receive/Transmit Clock enabled only if RF Low -#define AT91C_SSC_CKG_HIGH (0x2 << 6) // (SSC) Receive/Transmit Clock enabled only if RF High -#define AT91C_SSC_START (0xF << 8) // (SSC) Receive/Transmit Start Selection -#define AT91C_SSC_START_CONTINOUS (0x0 << 8) // (SSC) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. -#define AT91C_SSC_START_TX (0x1 << 8) // (SSC) Transmit/Receive start -#define AT91C_SSC_START_LOW_RF (0x2 << 8) // (SSC) Detection of a low level on RF input -#define AT91C_SSC_START_HIGH_RF (0x3 << 8) // (SSC) Detection of a high level on RF input -#define AT91C_SSC_START_FALL_RF (0x4 << 8) // (SSC) Detection of a falling edge on RF input -#define AT91C_SSC_START_RISE_RF (0x5 << 8) // (SSC) Detection of a rising edge on RF input -#define AT91C_SSC_START_LEVEL_RF (0x6 << 8) // (SSC) Detection of any level change on RF input -#define AT91C_SSC_START_EDGE_RF (0x7 << 8) // (SSC) Detection of any edge on RF input -#define AT91C_SSC_START_0 (0x8 << 8) // (SSC) Compare 0 -#define AT91C_SSC_STOP (0x1 << 12) // (SSC) Receive Stop Selection -#define AT91C_SSC_STTOUT (0x1 << 15) // (SSC) Receive/Transmit Start Output Selection -#define AT91C_SSC_STTDLY (0xFF << 16) // (SSC) Receive/Transmit Start Delay -#define AT91C_SSC_PERIOD (0xFF << 24) // (SSC) Receive/Transmit Period Divider Selection -// -------- SSC_RFMR : (SSC Offset: 0x14) SSC Receive Frame Mode Register -------- -#define AT91C_SSC_DATLEN (0x1F << 0) // (SSC) Data Length -#define AT91C_SSC_LOOP (0x1 << 5) // (SSC) Loop Mode -#define AT91C_SSC_MSBF (0x1 << 7) // (SSC) Most Significant Bit First -#define AT91C_SSC_DATNB (0xF << 8) // (SSC) Data Number per Frame -#define AT91C_SSC_FSLEN (0xF << 16) // (SSC) Receive/Transmit Frame Sync length -#define AT91C_SSC_FSOS (0x7 << 20) // (SSC) Receive/Transmit Frame Sync Output Selection -#define AT91C_SSC_FSOS_NONE (0x0 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: None RK pin Input-only -#define AT91C_SSC_FSOS_NEGATIVE (0x1 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Negative Pulse -#define AT91C_SSC_FSOS_POSITIVE (0x2 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Positive Pulse -#define AT91C_SSC_FSOS_LOW (0x3 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver Low during data transfer -#define AT91C_SSC_FSOS_HIGH (0x4 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Driver High during data transfer -#define AT91C_SSC_FSOS_TOGGLE (0x5 << 20) // (SSC) Selected Receive/Transmit Frame Sync Signal: Toggling at each start of data transfer -#define AT91C_SSC_FSEDGE (0x1 << 24) // (SSC) Frame Sync Edge Detection -// -------- SSC_TCMR : (SSC Offset: 0x18) SSC Transmit Clock Mode Register -------- -// -------- SSC_TFMR : (SSC Offset: 0x1c) SSC Transmit Frame Mode Register -------- -#define AT91C_SSC_DATDEF (0x1 << 5) // (SSC) Data Default Value -#define AT91C_SSC_FSDEN (0x1 << 23) // (SSC) Frame Sync Data Enable -// -------- SSC_SR : (SSC Offset: 0x40) SSC Status Register -------- -#define AT91C_SSC_TXRDY (0x1 << 0) // (SSC) Transmit Ready -#define AT91C_SSC_TXEMPTY (0x1 << 1) // (SSC) Transmit Empty -#define AT91C_SSC_ENDTX (0x1 << 2) // (SSC) End Of Transmission -#define AT91C_SSC_TXBUFE (0x1 << 3) // (SSC) Transmit Buffer Empty -#define AT91C_SSC_RXRDY (0x1 << 4) // (SSC) Receive Ready -#define AT91C_SSC_OVRUN (0x1 << 5) // (SSC) Receive Overrun -#define AT91C_SSC_ENDRX (0x1 << 6) // (SSC) End of Reception -#define AT91C_SSC_RXBUFF (0x1 << 7) // (SSC) Receive Buffer Full -#define AT91C_SSC_CP0 (0x1 << 8) // (SSC) Compare 0 -#define AT91C_SSC_CP1 (0x1 << 9) // (SSC) Compare 1 -#define AT91C_SSC_TXSYN (0x1 << 10) // (SSC) Transmit Sync -#define AT91C_SSC_RXSYN (0x1 << 11) // (SSC) Receive Sync -#define AT91C_SSC_TXENA (0x1 << 16) // (SSC) Transmit Enable -#define AT91C_SSC_RXENA (0x1 << 17) // (SSC) Receive Enable -// -------- SSC_IER : (SSC Offset: 0x44) SSC Interrupt Enable Register -------- -// -------- SSC_IDR : (SSC Offset: 0x48) SSC Interrupt Disable Register -------- -// -------- SSC_IMR : (SSC Offset: 0x4c) SSC Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Usart -// ***************************************************************************** -// *** Register offset in AT91S_USART structure *** -#define US_CR ( 0) // Control Register -#define US_MR ( 4) // Mode Register -#define US_IER ( 8) // Interrupt Enable Register -#define US_IDR (12) // Interrupt Disable Register -#define US_IMR (16) // Interrupt Mask Register -#define US_CSR (20) // Channel Status Register -#define US_RHR (24) // Receiver Holding Register -#define US_THR (28) // Transmitter Holding Register -#define US_BRGR (32) // Baud Rate Generator Register -#define US_RTOR (36) // Receiver Time-out Register -#define US_TTGR (40) // Transmitter Time-guard Register -#define US_FIDI (64) // FI_DI_Ratio Register -#define US_NER (68) // Nb Errors Register -#define US_XXR (72) // XON_XOFF Register -#define US_IF (76) // IRDA_FILTER Register -#define US_RPR (256) // Receive Pointer Register -#define US_RCR (260) // Receive Counter Register -#define US_TPR (264) // Transmit Pointer Register -#define US_TCR (268) // Transmit Counter Register -#define US_RNPR (272) // Receive Next Pointer Register -#define US_RNCR (276) // Receive Next Counter Register -#define US_TNPR (280) // Transmit Next Pointer Register -#define US_TNCR (284) // Transmit Next Counter Register -#define US_PTCR (288) // PDC Transfer Control Register -#define US_PTSR (292) // PDC Transfer Status Register -// -------- US_CR : (USART Offset: 0x0) Debug Unit Control Register -------- -#define AT91C_US_RSTSTA (0x1 << 8) // (USART) Reset Status Bits -#define AT91C_US_STTBRK (0x1 << 9) // (USART) Start Break -#define AT91C_US_STPBRK (0x1 << 10) // (USART) Stop Break -#define AT91C_US_STTTO (0x1 << 11) // (USART) Start Time-out -#define AT91C_US_SENDA (0x1 << 12) // (USART) Send Address -#define AT91C_US_RSTIT (0x1 << 13) // (USART) Reset Iterations -#define AT91C_US_RSTNACK (0x1 << 14) // (USART) Reset Non Acknowledge -#define AT91C_US_RETTO (0x1 << 15) // (USART) Rearm Time-out -#define AT91C_US_DTREN (0x1 << 16) // (USART) Data Terminal ready Enable -#define AT91C_US_DTRDIS (0x1 << 17) // (USART) Data Terminal ready Disable -#define AT91C_US_RTSEN (0x1 << 18) // (USART) Request to Send enable -#define AT91C_US_RTSDIS (0x1 << 19) // (USART) Request to Send Disable -// -------- US_MR : (USART Offset: 0x4) Debug Unit Mode Register -------- -#define AT91C_US_USMODE (0xF << 0) // (USART) Usart mode -#define AT91C_US_USMODE_NORMAL (0x0) // (USART) Normal -#define AT91C_US_USMODE_RS485 (0x1) // (USART) RS485 -#define AT91C_US_USMODE_HWHSH (0x2) // (USART) Hardware Handshaking -#define AT91C_US_USMODE_MODEM (0x3) // (USART) Modem -#define AT91C_US_USMODE_ISO7816_0 (0x4) // (USART) ISO7816 protocol: T = 0 -#define AT91C_US_USMODE_ISO7816_1 (0x6) // (USART) ISO7816 protocol: T = 1 -#define AT91C_US_USMODE_IRDA (0x8) // (USART) IrDA -#define AT91C_US_USMODE_SWHSH (0xC) // (USART) Software Handshaking -#define AT91C_US_CLKS (0x3 << 4) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CLKS_CLOCK (0x0 << 4) // (USART) Clock -#define AT91C_US_CLKS_FDIV1 (0x1 << 4) // (USART) fdiv1 -#define AT91C_US_CLKS_SLOW (0x2 << 4) // (USART) slow_clock (ARM) -#define AT91C_US_CLKS_EXT (0x3 << 4) // (USART) External (SCK) -#define AT91C_US_CHRL (0x3 << 6) // (USART) Clock Selection (Baud Rate generator Input Clock -#define AT91C_US_CHRL_5_BITS (0x0 << 6) // (USART) Character Length: 5 bits -#define AT91C_US_CHRL_6_BITS (0x1 << 6) // (USART) Character Length: 6 bits -#define AT91C_US_CHRL_7_BITS (0x2 << 6) // (USART) Character Length: 7 bits -#define AT91C_US_CHRL_8_BITS (0x3 << 6) // (USART) Character Length: 8 bits -#define AT91C_US_SYNC (0x1 << 8) // (USART) Synchronous Mode Select -#define AT91C_US_NBSTOP (0x3 << 12) // (USART) Number of Stop bits -#define AT91C_US_NBSTOP_1_BIT (0x0 << 12) // (USART) 1 stop bit -#define AT91C_US_NBSTOP_15_BIT (0x1 << 12) // (USART) Asynchronous (SYNC=0) 2 stop bits Synchronous (SYNC=1) 2 stop bits -#define AT91C_US_NBSTOP_2_BIT (0x2 << 12) // (USART) 2 stop bits -#define AT91C_US_MSBF (0x1 << 16) // (USART) Bit Order -#define AT91C_US_MODE9 (0x1 << 17) // (USART) 9-bit Character length -#define AT91C_US_CKLO (0x1 << 18) // (USART) Clock Output Select -#define AT91C_US_OVER (0x1 << 19) // (USART) Over Sampling Mode -#define AT91C_US_INACK (0x1 << 20) // (USART) Inhibit Non Acknowledge -#define AT91C_US_DSNACK (0x1 << 21) // (USART) Disable Successive NACK -#define AT91C_US_MAX_ITER (0x1 << 24) // (USART) Number of Repetitions -#define AT91C_US_FILTER (0x1 << 28) // (USART) Receive Line Filter -// -------- US_IER : (USART Offset: 0x8) Debug Unit Interrupt Enable Register -------- -#define AT91C_US_RXBRK (0x1 << 2) // (USART) Break Received/End of Break -#define AT91C_US_TIMEOUT (0x1 << 8) // (USART) Receiver Time-out -#define AT91C_US_ITERATION (0x1 << 10) // (USART) Max number of Repetitions Reached -#define AT91C_US_NACK (0x1 << 13) // (USART) Non Acknowledge -#define AT91C_US_RIIC (0x1 << 16) // (USART) Ring INdicator Input Change Flag -#define AT91C_US_DSRIC (0x1 << 17) // (USART) Data Set Ready Input Change Flag -#define AT91C_US_DCDIC (0x1 << 18) // (USART) Data Carrier Flag -#define AT91C_US_CTSIC (0x1 << 19) // (USART) Clear To Send Input Change Flag -// -------- US_IDR : (USART Offset: 0xc) Debug Unit Interrupt Disable Register -------- -// -------- US_IMR : (USART Offset: 0x10) Debug Unit Interrupt Mask Register -------- -// -------- US_CSR : (USART Offset: 0x14) Debug Unit Channel Status Register -------- -#define AT91C_US_RI (0x1 << 20) // (USART) Image of RI Input -#define AT91C_US_DSR (0x1 << 21) // (USART) Image of DSR Input -#define AT91C_US_DCD (0x1 << 22) // (USART) Image of DCD Input -#define AT91C_US_CTS (0x1 << 23) // (USART) Image of CTS Input - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Two-wire Interface -// ***************************************************************************** -// *** Register offset in AT91S_TWI structure *** -#define TWI_CR ( 0) // Control Register -#define TWI_MMR ( 4) // Master Mode Register -#define TWI_SMR ( 8) // Slave Mode Register -#define TWI_IADR (12) // Internal Address Register -#define TWI_CWGR (16) // Clock Waveform Generator Register -#define TWI_SR (32) // Status Register -#define TWI_IER (36) // Interrupt Enable Register -#define TWI_IDR (40) // Interrupt Disable Register -#define TWI_IMR (44) // Interrupt Mask Register -#define TWI_RHR (48) // Receive Holding Register -#define TWI_THR (52) // Transmit Holding Register -// -------- TWI_CR : (TWI Offset: 0x0) TWI Control Register -------- -#define AT91C_TWI_START (0x1 << 0) // (TWI) Send a START Condition -#define AT91C_TWI_STOP (0x1 << 1) // (TWI) Send a STOP Condition -#define AT91C_TWI_MSEN (0x1 << 2) // (TWI) TWI Master Transfer Enabled -#define AT91C_TWI_MSDIS (0x1 << 3) // (TWI) TWI Master Transfer Disabled -#define AT91C_TWI_SVEN (0x1 << 4) // (TWI) TWI Slave Transfer Enabled -#define AT91C_TWI_SVDIS (0x1 << 5) // (TWI) TWI Slave Transfer Disabled -#define AT91C_TWI_SWRST (0x1 << 7) // (TWI) Software Reset -// -------- TWI_MMR : (TWI Offset: 0x4) TWI Master Mode Register -------- -#define AT91C_TWI_IADRSZ (0x3 << 8) // (TWI) Internal Device Address Size -#define AT91C_TWI_IADRSZ_NO (0x0 << 8) // (TWI) No internal device address -#define AT91C_TWI_IADRSZ_1_BYTE (0x1 << 8) // (TWI) One-byte internal device address -#define AT91C_TWI_IADRSZ_2_BYTE (0x2 << 8) // (TWI) Two-byte internal device address -#define AT91C_TWI_IADRSZ_3_BYTE (0x3 << 8) // (TWI) Three-byte internal device address -#define AT91C_TWI_MREAD (0x1 << 12) // (TWI) Master Read Direction -#define AT91C_TWI_DADR (0x7F << 16) // (TWI) Device Address -// -------- TWI_SMR : (TWI Offset: 0x8) TWI Slave Mode Register -------- -#define AT91C_TWI_SADR (0x7F << 16) // (TWI) Slave Device Address -// -------- TWI_CWGR : (TWI Offset: 0x10) TWI Clock Waveform Generator Register -------- -#define AT91C_TWI_CLDIV (0xFF << 0) // (TWI) Clock Low Divider -#define AT91C_TWI_CHDIV (0xFF << 8) // (TWI) Clock High Divider -#define AT91C_TWI_CKDIV (0x7 << 16) // (TWI) Clock Divider -// -------- TWI_SR : (TWI Offset: 0x20) TWI Status Register -------- -#define AT91C_TWI_TXCOMP (0x1 << 0) // (TWI) Transmission Completed -#define AT91C_TWI_RXRDY (0x1 << 1) // (TWI) Receive holding register ReaDY -#define AT91C_TWI_TXRDY (0x1 << 2) // (TWI) Transmit holding register ReaDY -#define AT91C_TWI_SVREAD (0x1 << 3) // (TWI) Slave Read -#define AT91C_TWI_SVACC (0x1 << 4) // (TWI) Slave Access -#define AT91C_TWI_GCACC (0x1 << 5) // (TWI) General Call Access -#define AT91C_TWI_OVRE (0x1 << 6) // (TWI) Overrun Error -#define AT91C_TWI_UNRE (0x1 << 7) // (TWI) Underrun Error -#define AT91C_TWI_NACK (0x1 << 8) // (TWI) Not Acknowledged -#define AT91C_TWI_ARBLST (0x1 << 9) // (TWI) Arbitration Lost -// -------- TWI_IER : (TWI Offset: 0x24) TWI Interrupt Enable Register -------- -// -------- TWI_IDR : (TWI Offset: 0x28) TWI Interrupt Disable Register -------- -// -------- TWI_IMR : (TWI Offset: 0x2c) TWI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Multimedia Card Interface -// ***************************************************************************** -// *** Register offset in AT91S_MCI structure *** -#define MCI_CR ( 0) // MCI Control Register -#define MCI_MR ( 4) // MCI Mode Register -#define MCI_DTOR ( 8) // MCI Data Timeout Register -#define MCI_SDCR (12) // MCI SD Card Register -#define MCI_ARGR (16) // MCI Argument Register -#define MCI_CMDR (20) // MCI Command Register -#define MCI_RSPR (32) // MCI Response Register -#define MCI_RDR (48) // MCI Receive Data Register -#define MCI_TDR (52) // MCI Transmit Data Register -#define MCI_SR (64) // MCI Status Register -#define MCI_IER (68) // MCI Interrupt Enable Register -#define MCI_IDR (72) // MCI Interrupt Disable Register -#define MCI_IMR (76) // MCI Interrupt Mask Register -#define MCI_RPR (256) // Receive Pointer Register -#define MCI_RCR (260) // Receive Counter Register -#define MCI_TPR (264) // Transmit Pointer Register -#define MCI_TCR (268) // Transmit Counter Register -#define MCI_RNPR (272) // Receive Next Pointer Register -#define MCI_RNCR (276) // Receive Next Counter Register -#define MCI_TNPR (280) // Transmit Next Pointer Register -#define MCI_TNCR (284) // Transmit Next Counter Register -#define MCI_PTCR (288) // PDC Transfer Control Register -#define MCI_PTSR (292) // PDC Transfer Status Register -// -------- MCI_CR : (MCI Offset: 0x0) MCI Control Register -------- -#define AT91C_MCI_MCIEN (0x1 << 0) // (MCI) Multimedia Interface Enable -#define AT91C_MCI_MCIDIS (0x1 << 1) // (MCI) Multimedia Interface Disable -#define AT91C_MCI_PWSEN (0x1 << 2) // (MCI) Power Save Mode Enable -#define AT91C_MCI_PWSDIS (0x1 << 3) // (MCI) Power Save Mode Disable -// -------- MCI_MR : (MCI Offset: 0x4) MCI Mode Register -------- -#define AT91C_MCI_CLKDIV (0x1 << 0) // (MCI) Clock Divider -#define AT91C_MCI_PWSDIV (0x1 << 8) // (MCI) Power Saving Divider -#define AT91C_MCI_PDCPADV (0x1 << 14) // (MCI) PDC Padding Value -#define AT91C_MCI_PDCMODE (0x1 << 15) // (MCI) PDC Oriented Mode -#define AT91C_MCI_BLKLEN (0x1 << 18) // (MCI) Data Block Length -// -------- MCI_DTOR : (MCI Offset: 0x8) MCI Data Timeout Register -------- -#define AT91C_MCI_DTOCYC (0x1 << 0) // (MCI) Data Timeout Cycle Number -#define AT91C_MCI_DTOMUL (0x7 << 4) // (MCI) Data Timeout Multiplier -#define AT91C_MCI_DTOMUL_1 (0x0 << 4) // (MCI) DTOCYC x 1 -#define AT91C_MCI_DTOMUL_16 (0x1 << 4) // (MCI) DTOCYC x 16 -#define AT91C_MCI_DTOMUL_128 (0x2 << 4) // (MCI) DTOCYC x 128 -#define AT91C_MCI_DTOMUL_256 (0x3 << 4) // (MCI) DTOCYC x 256 -#define AT91C_MCI_DTOMUL_1024 (0x4 << 4) // (MCI) DTOCYC x 1024 -#define AT91C_MCI_DTOMUL_4096 (0x5 << 4) // (MCI) DTOCYC x 4096 -#define AT91C_MCI_DTOMUL_65536 (0x6 << 4) // (MCI) DTOCYC x 65536 -#define AT91C_MCI_DTOMUL_1048576 (0x7 << 4) // (MCI) DTOCYC x 1048576 -// -------- MCI_SDCR : (MCI Offset: 0xc) MCI SD Card Register -------- -#define AT91C_MCI_SCDSEL (0x1 << 0) // (MCI) SD Card Selector -#define AT91C_MCI_SCDBUS (0x1 << 7) // (MCI) SD Card Bus Width -// -------- MCI_CMDR : (MCI Offset: 0x14) MCI Command Register -------- -#define AT91C_MCI_CMDNB (0x1F << 0) // (MCI) Command Number -#define AT91C_MCI_RSPTYP (0x3 << 6) // (MCI) Response Type -#define AT91C_MCI_RSPTYP_NO (0x0 << 6) // (MCI) No response -#define AT91C_MCI_RSPTYP_48 (0x1 << 6) // (MCI) 48-bit response -#define AT91C_MCI_RSPTYP_136 (0x2 << 6) // (MCI) 136-bit response -#define AT91C_MCI_SPCMD (0x7 << 8) // (MCI) Special CMD -#define AT91C_MCI_SPCMD_NONE (0x0 << 8) // (MCI) Not a special CMD -#define AT91C_MCI_SPCMD_INIT (0x1 << 8) // (MCI) Initialization CMD -#define AT91C_MCI_SPCMD_SYNC (0x2 << 8) // (MCI) Synchronized CMD -#define AT91C_MCI_SPCMD_IT_CMD (0x4 << 8) // (MCI) Interrupt command -#define AT91C_MCI_SPCMD_IT_REP (0x5 << 8) // (MCI) Interrupt response -#define AT91C_MCI_OPDCMD (0x1 << 11) // (MCI) Open Drain Command -#define AT91C_MCI_MAXLAT (0x1 << 12) // (MCI) Maximum Latency for Command to respond -#define AT91C_MCI_TRCMD (0x3 << 16) // (MCI) Transfer CMD -#define AT91C_MCI_TRCMD_NO (0x0 << 16) // (MCI) No transfer -#define AT91C_MCI_TRCMD_START (0x1 << 16) // (MCI) Start transfer -#define AT91C_MCI_TRCMD_STOP (0x2 << 16) // (MCI) Stop transfer -#define AT91C_MCI_TRDIR (0x1 << 18) // (MCI) Transfer Direction -#define AT91C_MCI_TRTYP (0x3 << 19) // (MCI) Transfer Type -#define AT91C_MCI_TRTYP_BLOCK (0x0 << 19) // (MCI) Block Transfer type -#define AT91C_MCI_TRTYP_MULTIPLE (0x1 << 19) // (MCI) Multiple Block transfer type -#define AT91C_MCI_TRTYP_STREAM (0x2 << 19) // (MCI) Stream transfer type -// -------- MCI_SR : (MCI Offset: 0x40) MCI Status Register -------- -#define AT91C_MCI_CMDRDY (0x1 << 0) // (MCI) Command Ready flag -#define AT91C_MCI_RXRDY (0x1 << 1) // (MCI) RX Ready flag -#define AT91C_MCI_TXRDY (0x1 << 2) // (MCI) TX Ready flag -#define AT91C_MCI_BLKE (0x1 << 3) // (MCI) Data Block Transfer Ended flag -#define AT91C_MCI_DTIP (0x1 << 4) // (MCI) Data Transfer in Progress flag -#define AT91C_MCI_NOTBUSY (0x1 << 5) // (MCI) Data Line Not Busy flag -#define AT91C_MCI_ENDRX (0x1 << 6) // (MCI) End of RX Buffer flag -#define AT91C_MCI_ENDTX (0x1 << 7) // (MCI) End of TX Buffer flag -#define AT91C_MCI_RXBUFF (0x1 << 14) // (MCI) RX Buffer Full flag -#define AT91C_MCI_TXBUFE (0x1 << 15) // (MCI) TX Buffer Empty flag -#define AT91C_MCI_RINDE (0x1 << 16) // (MCI) Response Index Error flag -#define AT91C_MCI_RDIRE (0x1 << 17) // (MCI) Response Direction Error flag -#define AT91C_MCI_RCRCE (0x1 << 18) // (MCI) Response CRC Error flag -#define AT91C_MCI_RENDE (0x1 << 19) // (MCI) Response End Bit Error flag -#define AT91C_MCI_RTOE (0x1 << 20) // (MCI) Response Time-out Error flag -#define AT91C_MCI_DCRCE (0x1 << 21) // (MCI) data CRC Error flag -#define AT91C_MCI_DTOE (0x1 << 22) // (MCI) Data timeout Error flag -#define AT91C_MCI_OVRE (0x1 << 30) // (MCI) Overrun flag -#define AT91C_MCI_UNRE (0x1 << 31) // (MCI) Underrun flag -// -------- MCI_IER : (MCI Offset: 0x44) MCI Interrupt Enable Register -------- -// -------- MCI_IDR : (MCI Offset: 0x48) MCI Interrupt Disable Register -------- -// -------- MCI_IMR : (MCI Offset: 0x4c) MCI Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Device Interface -// ***************************************************************************** -// *** Register offset in AT91S_UDP structure *** -#define UDP_NUM ( 0) // Frame Number Register -#define UDP_GLBSTATE ( 4) // Global State Register -#define UDP_FADDR ( 8) // Function Address Register -#define UDP_IER (16) // Interrupt Enable Register -#define UDP_IDR (20) // Interrupt Disable Register -#define UDP_IMR (24) // Interrupt Mask Register -#define UDP_ISR (28) // Interrupt Status Register -#define UDP_ICR (32) // Interrupt Clear Register -#define UDP_RSTEP (40) // Reset Endpoint Register -#define UDP_CSR (48) // Endpoint Control and Status Register -#define UDP_FDR (80) // Endpoint FIFO Data Register -// -------- UDP_FRM_NUM : (UDP Offset: 0x0) USB Frame Number Register -------- -#define AT91C_UDP_FRM_NUM (0x7FF << 0) // (UDP) Frame Number as Defined in the Packet Field Formats -#define AT91C_UDP_FRM_ERR (0x1 << 16) // (UDP) Frame Error -#define AT91C_UDP_FRM_OK (0x1 << 17) // (UDP) Frame OK -// -------- UDP_GLB_STATE : (UDP Offset: 0x4) USB Global State Register -------- -#define AT91C_UDP_FADDEN (0x1 << 0) // (UDP) Function Address Enable -#define AT91C_UDP_CONFG (0x1 << 1) // (UDP) Configured -#define AT91C_UDP_RMWUPE (0x1 << 2) // (UDP) Remote Wake Up Enable -#define AT91C_UDP_RSMINPR (0x1 << 3) // (UDP) A Resume Has Been Sent to the Host -// -------- UDP_FADDR : (UDP Offset: 0x8) USB Function Address Register -------- -#define AT91C_UDP_FADD (0xFF << 0) // (UDP) Function Address Value -#define AT91C_UDP_FEN (0x1 << 8) // (UDP) Function Enable -// -------- UDP_IER : (UDP Offset: 0x10) USB Interrupt Enable Register -------- -#define AT91C_UDP_EPINT0 (0x1 << 0) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT1 (0x1 << 1) // (UDP) Endpoint 0 Interrupt -#define AT91C_UDP_EPINT2 (0x1 << 2) // (UDP) Endpoint 2 Interrupt -#define AT91C_UDP_EPINT3 (0x1 << 3) // (UDP) Endpoint 3 Interrupt -#define AT91C_UDP_EPINT4 (0x1 << 4) // (UDP) Endpoint 4 Interrupt -#define AT91C_UDP_EPINT5 (0x1 << 5) // (UDP) Endpoint 5 Interrupt -#define AT91C_UDP_EPINT6 (0x1 << 6) // (UDP) Endpoint 6 Interrupt -#define AT91C_UDP_EPINT7 (0x1 << 7) // (UDP) Endpoint 7 Interrupt -#define AT91C_UDP_RXSUSP (0x1 << 8) // (UDP) USB Suspend Interrupt -#define AT91C_UDP_RXRSM (0x1 << 9) // (UDP) USB Resume Interrupt -#define AT91C_UDP_EXTRSM (0x1 << 10) // (UDP) USB External Resume Interrupt -#define AT91C_UDP_SOFINT (0x1 << 11) // (UDP) USB Start Of frame Interrupt -#define AT91C_UDP_WAKEUP (0x1 << 13) // (UDP) USB Resume Interrupt -// -------- UDP_IDR : (UDP Offset: 0x14) USB Interrupt Disable Register -------- -// -------- UDP_IMR : (UDP Offset: 0x18) USB Interrupt Mask Register -------- -// -------- UDP_ISR : (UDP Offset: 0x1c) USB Interrupt Status Register -------- -#define AT91C_UDP_ENDBUSRES (0x1 << 12) // (UDP) USB End Of Bus Reset Interrupt -// -------- UDP_ICR : (UDP Offset: 0x20) USB Interrupt Clear Register -------- -// -------- UDP_RST_EP : (UDP Offset: 0x28) USB Reset Endpoint Register -------- -#define AT91C_UDP_EP0 (0x1 << 0) // (UDP) Reset Endpoint 0 -#define AT91C_UDP_EP1 (0x1 << 1) // (UDP) Reset Endpoint 1 -#define AT91C_UDP_EP2 (0x1 << 2) // (UDP) Reset Endpoint 2 -#define AT91C_UDP_EP3 (0x1 << 3) // (UDP) Reset Endpoint 3 -#define AT91C_UDP_EP4 (0x1 << 4) // (UDP) Reset Endpoint 4 -#define AT91C_UDP_EP5 (0x1 << 5) // (UDP) Reset Endpoint 5 -#define AT91C_UDP_EP6 (0x1 << 6) // (UDP) Reset Endpoint 6 -#define AT91C_UDP_EP7 (0x1 << 7) // (UDP) Reset Endpoint 7 -// -------- UDP_CSR : (UDP Offset: 0x30) USB Endpoint Control and Status Register -------- -#define AT91C_UDP_TXCOMP (0x1 << 0) // (UDP) Generates an IN packet with data previously written in the DPR -#define AT91C_UDP_RX_DATA_BK0 (0x1 << 1) // (UDP) Receive Data Bank 0 -#define AT91C_UDP_RXSETUP (0x1 << 2) // (UDP) Sends STALL to the Host (Control endpoints) -#define AT91C_UDP_ISOERROR (0x1 << 3) // (UDP) Isochronous error (Isochronous endpoints) -#define AT91C_UDP_TXPKTRDY (0x1 << 4) // (UDP) Transmit Packet Ready -#define AT91C_UDP_FORCESTALL (0x1 << 5) // (UDP) Force Stall (used by Control, Bulk and Isochronous endpoints). -#define AT91C_UDP_RX_DATA_BK1 (0x1 << 6) // (UDP) Receive Data Bank 1 (only used by endpoints with ping-pong attributes). -#define AT91C_UDP_DIR (0x1 << 7) // (UDP) Transfer Direction -#define AT91C_UDP_EPTYPE (0x7 << 8) // (UDP) Endpoint type -#define AT91C_UDP_EPTYPE_CTRL (0x0 << 8) // (UDP) Control -#define AT91C_UDP_EPTYPE_ISO_OUT (0x1 << 8) // (UDP) Isochronous OUT -#define AT91C_UDP_EPTYPE_BULK_OUT (0x2 << 8) // (UDP) Bulk OUT -#define AT91C_UDP_EPTYPE_INT_OUT (0x3 << 8) // (UDP) Interrupt OUT -#define AT91C_UDP_EPTYPE_ISO_IN (0x5 << 8) // (UDP) Isochronous IN -#define AT91C_UDP_EPTYPE_BULK_IN (0x6 << 8) // (UDP) Bulk IN -#define AT91C_UDP_EPTYPE_INT_IN (0x7 << 8) // (UDP) Interrupt IN -#define AT91C_UDP_DTGLE (0x1 << 11) // (UDP) Data Toggle -#define AT91C_UDP_EPEDS (0x1 << 15) // (UDP) Endpoint Enable Disable -#define AT91C_UDP_RXBYTECNT (0x7FF << 16) // (UDP) Number Of Bytes Available in the FIFO - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Channel Interface -// ***************************************************************************** -// *** Register offset in AT91S_TC structure *** -#define TC_CCR ( 0) // Channel Control Register -#define TC_CMR ( 4) // Channel Mode Register -#define TC_CV (16) // Counter Value -#define TC_RA (20) // Register A -#define TC_RB (24) // Register B -#define TC_RC (28) // Register C -#define TC_SR (32) // Status Register -#define TC_IER (36) // Interrupt Enable Register -#define TC_IDR (40) // Interrupt Disable Register -#define TC_IMR (44) // Interrupt Mask Register -// -------- TC_CCR : (TC Offset: 0x0) TC Channel Control Register -------- -#define AT91C_TC_CLKEN (0x1 << 0) // (TC) Counter Clock Enable Command -#define AT91C_TC_CLKDIS (0x1 << 1) // (TC) Counter Clock Disable Command -#define AT91C_TC_SWTRG (0x1 << 2) // (TC) Software Trigger Command -// -------- TC_CMR : (TC Offset: 0x4) TC Channel Mode Register: Capture Mode / Waveform Mode -------- -#define AT91C_TC_CPCSTOP (0x1 << 6) // (TC) Counter Clock Stopped with RC Compare -#define AT91C_TC_CPCDIS (0x1 << 7) // (TC) Counter Clock Disable with RC Compare -#define AT91C_TC_EEVTEDG (0x3 << 8) // (TC) External Event Edge Selection -#define AT91C_TC_EEVTEDG_NONE (0x0 << 8) // (TC) Edge: None -#define AT91C_TC_EEVTEDG_RISING (0x1 << 8) // (TC) Edge: rising edge -#define AT91C_TC_EEVTEDG_FALLING (0x2 << 8) // (TC) Edge: falling edge -#define AT91C_TC_EEVTEDG_BOTH (0x3 << 8) // (TC) Edge: each edge -#define AT91C_TC_EEVT (0x3 << 10) // (TC) External Event Selection -#define AT91C_TC_EEVT_NONE (0x0 << 10) // (TC) Signal selected as external event: TIOB TIOB direction: input -#define AT91C_TC_EEVT_RISING (0x1 << 10) // (TC) Signal selected as external event: XC0 TIOB direction: output -#define AT91C_TC_EEVT_FALLING (0x2 << 10) // (TC) Signal selected as external event: XC1 TIOB direction: output -#define AT91C_TC_EEVT_BOTH (0x3 << 10) // (TC) Signal selected as external event: XC2 TIOB direction: output -#define AT91C_TC_ENETRG (0x1 << 12) // (TC) External Event Trigger enable -#define AT91C_TC_WAVESEL (0x3 << 13) // (TC) Waveform Selection -#define AT91C_TC_WAVESEL_UP (0x0 << 13) // (TC) UP mode without atomatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN (0x1 << 13) // (TC) UPDOWN mode without automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UP_AUTO (0x2 << 13) // (TC) UP mode with automatic trigger on RC Compare -#define AT91C_TC_WAVESEL_UPDOWN_AUTO (0x3 << 13) // (TC) UPDOWN mode with automatic trigger on RC Compare -#define AT91C_TC_CPCTRG (0x1 << 14) // (TC) RC Compare Trigger Enable -#define AT91C_TC_WAVE (0x1 << 15) // (TC) -#define AT91C_TC_ACPA (0x3 << 16) // (TC) RA Compare Effect on TIOA -#define AT91C_TC_ACPA_NONE (0x0 << 16) // (TC) Effect: none -#define AT91C_TC_ACPA_SET (0x1 << 16) // (TC) Effect: set -#define AT91C_TC_ACPA_CLEAR (0x2 << 16) // (TC) Effect: clear -#define AT91C_TC_ACPA_TOGGLE (0x3 << 16) // (TC) Effect: toggle -#define AT91C_TC_ACPC (0x3 << 18) // (TC) RC Compare Effect on TIOA -#define AT91C_TC_ACPC_NONE (0x0 << 18) // (TC) Effect: none -#define AT91C_TC_ACPC_SET (0x1 << 18) // (TC) Effect: set -#define AT91C_TC_ACPC_CLEAR (0x2 << 18) // (TC) Effect: clear -#define AT91C_TC_ACPC_TOGGLE (0x3 << 18) // (TC) Effect: toggle -#define AT91C_TC_AEEVT (0x3 << 20) // (TC) External Event Effect on TIOA -#define AT91C_TC_AEEVT_NONE (0x0 << 20) // (TC) Effect: none -#define AT91C_TC_AEEVT_SET (0x1 << 20) // (TC) Effect: set -#define AT91C_TC_AEEVT_CLEAR (0x2 << 20) // (TC) Effect: clear -#define AT91C_TC_AEEVT_TOGGLE (0x3 << 20) // (TC) Effect: toggle -#define AT91C_TC_ASWTRG (0x3 << 22) // (TC) Software Trigger Effect on TIOA -#define AT91C_TC_ASWTRG_NONE (0x0 << 22) // (TC) Effect: none -#define AT91C_TC_ASWTRG_SET (0x1 << 22) // (TC) Effect: set -#define AT91C_TC_ASWTRG_CLEAR (0x2 << 22) // (TC) Effect: clear -#define AT91C_TC_ASWTRG_TOGGLE (0x3 << 22) // (TC) Effect: toggle -#define AT91C_TC_BCPB (0x3 << 24) // (TC) RB Compare Effect on TIOB -#define AT91C_TC_BCPB_NONE (0x0 << 24) // (TC) Effect: none -#define AT91C_TC_BCPB_SET (0x1 << 24) // (TC) Effect: set -#define AT91C_TC_BCPB_CLEAR (0x2 << 24) // (TC) Effect: clear -#define AT91C_TC_BCPB_TOGGLE (0x3 << 24) // (TC) Effect: toggle -#define AT91C_TC_BCPC (0x3 << 26) // (TC) RC Compare Effect on TIOB -#define AT91C_TC_BCPC_NONE (0x0 << 26) // (TC) Effect: none -#define AT91C_TC_BCPC_SET (0x1 << 26) // (TC) Effect: set -#define AT91C_TC_BCPC_CLEAR (0x2 << 26) // (TC) Effect: clear -#define AT91C_TC_BCPC_TOGGLE (0x3 << 26) // (TC) Effect: toggle -#define AT91C_TC_BEEVT (0x3 << 28) // (TC) External Event Effect on TIOB -#define AT91C_TC_BEEVT_NONE (0x0 << 28) // (TC) Effect: none -#define AT91C_TC_BEEVT_SET (0x1 << 28) // (TC) Effect: set -#define AT91C_TC_BEEVT_CLEAR (0x2 << 28) // (TC) Effect: clear -#define AT91C_TC_BEEVT_TOGGLE (0x3 << 28) // (TC) Effect: toggle -#define AT91C_TC_BSWTRG (0x3 << 30) // (TC) Software Trigger Effect on TIOB -#define AT91C_TC_BSWTRG_NONE (0x0 << 30) // (TC) Effect: none -#define AT91C_TC_BSWTRG_SET (0x1 << 30) // (TC) Effect: set -#define AT91C_TC_BSWTRG_CLEAR (0x2 << 30) // (TC) Effect: clear -#define AT91C_TC_BSWTRG_TOGGLE (0x3 << 30) // (TC) Effect: toggle -// -------- TC_SR : (TC Offset: 0x20) TC Channel Status Register -------- -#define AT91C_TC_COVFS (0x1 << 0) // (TC) Counter Overflow -#define AT91C_TC_LOVRS (0x1 << 1) // (TC) Load Overrun -#define AT91C_TC_CPAS (0x1 << 2) // (TC) RA Compare -#define AT91C_TC_CPBS (0x1 << 3) // (TC) RB Compare -#define AT91C_TC_CPCS (0x1 << 4) // (TC) RC Compare -#define AT91C_TC_LDRAS (0x1 << 5) // (TC) RA Loading -#define AT91C_TC_LDRBS (0x1 << 6) // (TC) RB Loading -#define AT91C_TC_ETRCS (0x1 << 7) // (TC) External Trigger -#define AT91C_TC_ETRGS (0x1 << 16) // (TC) Clock Enabling -#define AT91C_TC_MTIOA (0x1 << 17) // (TC) TIOA Mirror -#define AT91C_TC_MTIOB (0x1 << 18) // (TC) TIOA Mirror -// -------- TC_IER : (TC Offset: 0x24) TC Channel Interrupt Enable Register -------- -// -------- TC_IDR : (TC Offset: 0x28) TC Channel Interrupt Disable Register -------- -// -------- TC_IMR : (TC Offset: 0x2c) TC Channel Interrupt Mask Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Timer Counter Interface -// ***************************************************************************** -// *** Register offset in AT91S_TCB structure *** -#define TCB_TC0 ( 0) // TC Channel 0 -#define TCB_TC1 (64) // TC Channel 1 -#define TCB_TC2 (128) // TC Channel 2 -#define TCB_BCR (192) // TC Block Control Register -#define TCB_BMR (196) // TC Block Mode Register -// -------- TCB_BCR : (TCB Offset: 0xc0) TC Block Control Register -------- -#define AT91C_TCB_SYNC (0x1 << 0) // (TCB) Synchro Command -// -------- TCB_BMR : (TCB Offset: 0xc4) TC Block Mode Register -------- -#define AT91C_TCB_TC0XC0S (0x1 << 0) // (TCB) External Clock Signal 0 Selection -#define AT91C_TCB_TC0XC0S_TCLK0 (0x0) // (TCB) TCLK0 connected to XC0 -#define AT91C_TCB_TC0XC0S_NONE (0x1) // (TCB) None signal connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA1 (0x2) // (TCB) TIOA1 connected to XC0 -#define AT91C_TCB_TC0XC0S_TIOA2 (0x3) // (TCB) TIOA2 connected to XC0 -#define AT91C_TCB_TC1XC1S (0x1 << 2) // (TCB) External Clock Signal 1 Selection -#define AT91C_TCB_TC1XC1S_TCLK1 (0x0 << 2) // (TCB) TCLK1 connected to XC1 -#define AT91C_TCB_TC1XC1S_NONE (0x1 << 2) // (TCB) None signal connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA0 (0x2 << 2) // (TCB) TIOA0 connected to XC1 -#define AT91C_TCB_TC1XC1S_TIOA2 (0x3 << 2) // (TCB) TIOA2 connected to XC1 -#define AT91C_TCB_TC2XC2S (0x1 << 4) // (TCB) External Clock Signal 2 Selection -#define AT91C_TCB_TC2XC2S_TCLK2 (0x0 << 4) // (TCB) TCLK2 connected to XC2 -#define AT91C_TCB_TC2XC2S_NONE (0x1 << 4) // (TCB) None signal connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA0 (0x2 << 4) // (TCB) TIOA0 connected to XC2 -#define AT91C_TCB_TC2XC2S_TIOA2 (0x3 << 4) // (TCB) TIOA2 connected to XC2 - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR USB Host Interface -// ***************************************************************************** -// *** Register offset in AT91S_UHP structure *** -#define UHP_HcRevision ( 0) // Revision -#define UHP_HcControl ( 4) // Operating modes for the Host Controller -#define UHP_HcCommandStatus ( 8) // Command & status Register -#define UHP_HcInterruptStatus (12) // Interrupt Status Register -#define UHP_HcInterruptEnable (16) // Interrupt Enable Register -#define UHP_HcInterruptDisable (20) // Interrupt Disable Register -#define UHP_HcHCCA (24) // Pointer to the Host Controller Communication Area -#define UHP_HcPeriodCurrentED (28) // Current Isochronous or Interrupt Endpoint Descriptor -#define UHP_HcControlHeadED (32) // First Endpoint Descriptor of the Control list -#define UHP_HcControlCurrentED (36) // Endpoint Control and Status Register -#define UHP_HcBulkHeadED (40) // First endpoint register of the Bulk list -#define UHP_HcBulkCurrentED (44) // Current endpoint of the Bulk list -#define UHP_HcBulkDoneHead (48) // Last completed transfer descriptor -#define UHP_HcFmInterval (52) // Bit time between 2 consecutive SOFs -#define UHP_HcFmRemaining (56) // Bit time remaining in the current Frame -#define UHP_HcFmNumber (60) // Frame number -#define UHP_HcPeriodicStart (64) // Periodic Start -#define UHP_HcLSThreshold (68) // LS Threshold -#define UHP_HcRhDescriptorA (72) // Root Hub characteristics A -#define UHP_HcRhDescriptorB (76) // Root Hub characteristics B -#define UHP_HcRhStatus (80) // Root Hub Status register -#define UHP_HcRhPortStatus (84) // Root Hub Port Status Register - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Ethernet MAC -// ***************************************************************************** -// *** Register offset in AT91S_EMAC structure *** -#define EMAC_CTL ( 0) // Network Control Register -#define EMAC_CFG ( 4) // Network Configuration Register -#define EMAC_SR ( 8) // Network Status Register -#define EMAC_TAR (12) // Transmit Address Register -#define EMAC_TCR (16) // Transmit Control Register -#define EMAC_TSR (20) // Transmit Status Register -#define EMAC_RBQP (24) // Receive Buffer Queue Pointer -#define EMAC_RSR (32) // Receive Status Register -#define EMAC_ISR (36) // Interrupt Status Register -#define EMAC_IER (40) // Interrupt Enable Register -#define EMAC_IDR (44) // Interrupt Disable Register -#define EMAC_IMR (48) // Interrupt Mask Register -#define EMAC_MAN (52) // PHY Maintenance Register -#define EMAC_FRA (64) // Frames Transmitted OK Register -#define EMAC_SCOL (68) // Single Collision Frame Register -#define EMAC_MCOL (72) // Multiple Collision Frame Register -#define EMAC_OK (76) // Frames Received OK Register -#define EMAC_SEQE (80) // Frame Check Sequence Error Register -#define EMAC_ALE (84) // Alignment Error Register -#define EMAC_DTE (88) // Deferred Transmission Frame Register -#define EMAC_LCOL (92) // Late Collision Register -#define EMAC_ECOL (96) // Excessive Collision Register -#define EMAC_CSE (100) // Carrier Sense Error Register -#define EMAC_TUE (104) // Transmit Underrun Error Register -#define EMAC_CDE (108) // Code Error Register -#define EMAC_ELR (112) // Excessive Length Error Register -#define EMAC_RJB (116) // Receive Jabber Register -#define EMAC_USF (120) // Undersize Frame Register -#define EMAC_SQEE (124) // SQE Test Error Register -#define EMAC_DRFC (128) // Discarded RX Frame Register -#define EMAC_HSH (144) // Hash Address High[63:32] -#define EMAC_HSL (148) // Hash Address Low[31:0] -#define EMAC_SA1L (152) // Specific Address 1 Low, First 4 bytes -#define EMAC_SA1H (156) // Specific Address 1 High, Last 2 bytes -#define EMAC_SA2L (160) // Specific Address 2 Low, First 4 bytes -#define EMAC_SA2H (164) // Specific Address 2 High, Last 2 bytes -#define EMAC_SA3L (168) // Specific Address 3 Low, First 4 bytes -#define EMAC_SA3H (172) // Specific Address 3 High, Last 2 bytes -#define EMAC_SA4L (176) // Specific Address 4 Low, First 4 bytes -#define EMAC_SA4H (180) // Specific Address 4 High, Last 2 bytesr -// -------- EMAC_CTL : (EMAC Offset: 0x0) -------- -#define AT91C_EMAC_LB (0x1 << 0) // (EMAC) Loopback. Optional. When set, loopback signal is at high level. -#define AT91C_EMAC_LBL (0x1 << 1) // (EMAC) Loopback local. -#define AT91C_EMAC_RE (0x1 << 2) // (EMAC) Receive enable. -#define AT91C_EMAC_TE (0x1 << 3) // (EMAC) Transmit enable. -#define AT91C_EMAC_MPE (0x1 << 4) // (EMAC) Management port enable. -#define AT91C_EMAC_CSR (0x1 << 5) // (EMAC) Clear statistics registers. -#define AT91C_EMAC_ISR (0x1 << 6) // (EMAC) Increment statistics registers. -#define AT91C_EMAC_WES (0x1 << 7) // (EMAC) Write enable for statistics registers. -#define AT91C_EMAC_BP (0x1 << 8) // (EMAC) Back pressure. -// -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- -#define AT91C_EMAC_SPD (0x1 << 0) // (EMAC) Speed. -#define AT91C_EMAC_FD (0x1 << 1) // (EMAC) Full duplex. -#define AT91C_EMAC_BR (0x1 << 2) // (EMAC) Bit rate. -#define AT91C_EMAC_CAF (0x1 << 4) // (EMAC) Copy all frames. -#define AT91C_EMAC_NBC (0x1 << 5) // (EMAC) No broadcast. -#define AT91C_EMAC_MTI (0x1 << 6) // (EMAC) Multicast hash enable -#define AT91C_EMAC_UNI (0x1 << 7) // (EMAC) Unicast hash enable. -#define AT91C_EMAC_BIG (0x1 << 8) // (EMAC) Receive 1522 bytes. -#define AT91C_EMAC_EAE (0x1 << 9) // (EMAC) External address match enable. -#define AT91C_EMAC_CLK (0x3 << 10) // (EMAC) -#define AT91C_EMAC_CLK_HCLK_8 (0x0 << 10) // (EMAC) HCLK divided by 8 -#define AT91C_EMAC_CLK_HCLK_16 (0x1 << 10) // (EMAC) HCLK divided by 16 -#define AT91C_EMAC_CLK_HCLK_32 (0x2 << 10) // (EMAC) HCLK divided by 32 -#define AT91C_EMAC_CLK_HCLK_64 (0x3 << 10) // (EMAC) HCLK divided by 64 -#define AT91C_EMAC_RTY (0x1 << 12) // (EMAC) -#define AT91C_EMAC_RMII (0x1 << 13) // (EMAC) -// -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- -#define AT91C_EMAC_MDIO (0x1 << 1) // (EMAC) -#define AT91C_EMAC_IDLE (0x1 << 2) // (EMAC) -// -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- -#define AT91C_EMAC_LEN (0x7FF << 0) // (EMAC) -#define AT91C_EMAC_NCRC (0x1 << 15) // (EMAC) -// -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- -#define AT91C_EMAC_OVR (0x1 << 0) // (EMAC) -#define AT91C_EMAC_COL (0x1 << 1) // (EMAC) -#define AT91C_EMAC_RLE (0x1 << 2) // (EMAC) -#define AT91C_EMAC_TXIDLE (0x1 << 3) // (EMAC) -#define AT91C_EMAC_BNQ (0x1 << 4) // (EMAC) -#define AT91C_EMAC_COMP (0x1 << 5) // (EMAC) -#define AT91C_EMAC_UND (0x1 << 6) // (EMAC) -// -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- -#define AT91C_EMAC_BNA (0x1 << 0) // (EMAC) -#define AT91C_EMAC_REC (0x1 << 1) // (EMAC) -// -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- -#define AT91C_EMAC_DONE (0x1 << 0) // (EMAC) -#define AT91C_EMAC_RCOM (0x1 << 1) // (EMAC) -#define AT91C_EMAC_RBNA (0x1 << 2) // (EMAC) -#define AT91C_EMAC_TOVR (0x1 << 3) // (EMAC) -#define AT91C_EMAC_TUND (0x1 << 4) // (EMAC) -#define AT91C_EMAC_RTRY (0x1 << 5) // (EMAC) -#define AT91C_EMAC_TBRE (0x1 << 6) // (EMAC) -#define AT91C_EMAC_TCOM (0x1 << 7) // (EMAC) -#define AT91C_EMAC_TIDLE (0x1 << 8) // (EMAC) -#define AT91C_EMAC_LINK (0x1 << 9) // (EMAC) -#define AT91C_EMAC_ROVR (0x1 << 10) // (EMAC) -#define AT91C_EMAC_HRESP (0x1 << 11) // (EMAC) -// -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- -// -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- -// -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- -// -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- -#define AT91C_EMAC_DATA (0xFFFF << 0) // (EMAC) -#define AT91C_EMAC_CODE (0x3 << 16) // (EMAC) -#define AT91C_EMAC_REGA (0x1F << 18) // (EMAC) -#define AT91C_EMAC_PHYA (0x1F << 23) // (EMAC) -#define AT91C_EMAC_RW (0x3 << 28) // (EMAC) -#define AT91C_EMAC_HIGH (0x1 << 30) // (EMAC) -#define AT91C_EMAC_LOW (0x1 << 31) // (EMAC) - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR External Bus Interface -// ***************************************************************************** -// *** Register offset in AT91S_EBI structure *** -#define EBI_CSA ( 0) // Chip Select Assignment Register -#define EBI_CFGR ( 4) // Configuration Register -// -------- EBI_CSA : (EBI Offset: 0x0) Chip Select Assignment Register -------- -#define AT91C_EBI_CS0A (0x1 << 0) // (EBI) Chip Select 0 Assignment -#define AT91C_EBI_CS0A_SMC (0x0) // (EBI) Chip Select 0 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS0A_BFC (0x1) // (EBI) Chip Select 0 is assigned to the Burst Flash Controller. -#define AT91C_EBI_CS1A (0x1 << 1) // (EBI) Chip Select 1 Assignment -#define AT91C_EBI_CS1A_SMC (0x0 << 1) // (EBI) Chip Select 1 is assigned to the Static Memory Controller. -#define AT91C_EBI_CS1A_SDRAMC (0x1 << 1) // (EBI) Chip Select 1 is assigned to the SDRAM Controller. -#define AT91C_EBI_CS3A (0x1 << 3) // (EBI) Chip Select 3 Assignment -#define AT91C_EBI_CS3A_SMC (0x0 << 3) // (EBI) Chip Select 3 is only assigned to the Static Memory Controller and NCS3 behaves as defined by the SMC2. -#define AT91C_EBI_CS3A_SMC_SmartMedia (0x1 << 3) // (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. -#define AT91C_EBI_CS4A (0x1 << 4) // (EBI) Chip Select 4 Assignment -#define AT91C_EBI_CS4A_SMC (0x0 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and NCS4,NCS5 and NCS6 behave as defined by the SMC2. -#define AT91C_EBI_CS4A_SMC_CompactFlash (0x1 << 4) // (EBI) Chip Select 4 is assigned to the Static Memory Controller and the CompactFlash Logic is activated. -// -------- EBI_CFGR : (EBI Offset: 0x4) Configuration Register -------- -#define AT91C_EBI_DBPUC (0x1 << 0) // (EBI) Data Bus Pull-Up Configuration -#define AT91C_EBI_EBSEN (0x1 << 1) // (EBI) Bus Sharing Enable - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface -// ***************************************************************************** -// *** Register offset in AT91S_SMC2 structure *** -#define SMC2_CSR ( 0) // SMC2 Chip Select Register -// -------- SMC2_CSR : (SMC2 Offset: 0x0) SMC2 Chip Select Register -------- -#define AT91C_SMC2_NWS (0x7F << 0) // (SMC2) Number of Wait States -#define AT91C_SMC2_WSEN (0x1 << 7) // (SMC2) Wait State Enable -#define AT91C_SMC2_TDF (0xF << 8) // (SMC2) Data Float Time -#define AT91C_SMC2_BAT (0x1 << 12) // (SMC2) Byte Access Type -#define AT91C_SMC2_DBW (0x1 << 13) // (SMC2) Data Bus Width -#define AT91C_SMC2_DBW_16 (0x1 << 13) // (SMC2) 16-bit. -#define AT91C_SMC2_DBW_8 (0x2 << 13) // (SMC2) 8-bit. -#define AT91C_SMC2_DRP (0x1 << 15) // (SMC2) Data Read Protocol -#define AT91C_SMC2_ACSS (0x3 << 16) // (SMC2) Address to Chip Select Setup -#define AT91C_SMC2_ACSS_STANDARD (0x0 << 16) // (SMC2) Standard, asserted at the beginning of the access and deasserted at the end. -#define AT91C_SMC2_ACSS_1_CYCLE (0x1 << 16) // (SMC2) One cycle less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_2_CYCLES (0x2 << 16) // (SMC2) Two cycles less at the beginning and the end of the access. -#define AT91C_SMC2_ACSS_3_CYCLES (0x3 << 16) // (SMC2) Three cycles less at the beginning and the end of the access. -#define AT91C_SMC2_RWSETUP (0x7 << 24) // (SMC2) Read and Write Signal Setup Time -#define AT91C_SMC2_RWHOLD (0x7 << 29) // (SMC2) Read and Write Signal Hold Time - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR SDRAM Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_SDRC structure *** -#define SDRC_MR ( 0) // SDRAM Controller Mode Register -#define SDRC_TR ( 4) // SDRAM Controller Refresh Timer Register -#define SDRC_CR ( 8) // SDRAM Controller Configuration Register -#define SDRC_SRR (12) // SDRAM Controller Self Refresh Register -#define SDRC_LPR (16) // SDRAM Controller Low Power Register -#define SDRC_IER (20) // SDRAM Controller Interrupt Enable Register -#define SDRC_IDR (24) // SDRAM Controller Interrupt Disable Register -#define SDRC_IMR (28) // SDRAM Controller Interrupt Mask Register -#define SDRC_ISR (32) // SDRAM Controller Interrupt Mask Register -// -------- SDRC_MR : (SDRC Offset: 0x0) SDRAM Controller Mode Register -------- -#define AT91C_SDRC_MODE (0xF << 0) // (SDRC) Mode -#define AT91C_SDRC_MODE_NORMAL_CMD (0x0) // (SDRC) Normal Mode -#define AT91C_SDRC_MODE_NOP_CMD (0x1) // (SDRC) NOP Command -#define AT91C_SDRC_MODE_PRCGALL_CMD (0x2) // (SDRC) All Banks Precharge Command -#define AT91C_SDRC_MODE_LMR_CMD (0x3) // (SDRC) Load Mode Register Command -#define AT91C_SDRC_MODE_RFSH_CMD (0x4) // (SDRC) Refresh Command -#define AT91C_SDRC_DBW (0x1 << 4) // (SDRC) Data Bus Width -#define AT91C_SDRC_DBW_32_BITS (0x0 << 4) // (SDRC) 32 Bits datas bus -#define AT91C_SDRC_DBW_16_BITS (0x1 << 4) // (SDRC) 16 Bits datas bus -// -------- SDRC_TR : (SDRC Offset: 0x4) SDRC Refresh Timer Register -------- -#define AT91C_SDRC_COUNT (0xFFF << 0) // (SDRC) Refresh Counter -// -------- SDRC_CR : (SDRC Offset: 0x8) SDRAM Configuration Register -------- -#define AT91C_SDRC_NC (0x3 << 0) // (SDRC) Number of Column Bits -#define AT91C_SDRC_NC_8 (0x0) // (SDRC) 8 Bits -#define AT91C_SDRC_NC_9 (0x1) // (SDRC) 9 Bits -#define AT91C_SDRC_NC_10 (0x2) // (SDRC) 10 Bits -#define AT91C_SDRC_NC_11 (0x3) // (SDRC) 11 Bits -#define AT91C_SDRC_NR (0x3 << 2) // (SDRC) Number of Row Bits -#define AT91C_SDRC_NR_11 (0x0 << 2) // (SDRC) 11 Bits -#define AT91C_SDRC_NR_12 (0x1 << 2) // (SDRC) 12 Bits -#define AT91C_SDRC_NR_13 (0x2 << 2) // (SDRC) 13 Bits -#define AT91C_SDRC_NB (0x1 << 4) // (SDRC) Number of Banks -#define AT91C_SDRC_NB_2_BANKS (0x0 << 4) // (SDRC) 2 banks -#define AT91C_SDRC_NB_4_BANKS (0x1 << 4) // (SDRC) 4 banks -#define AT91C_SDRC_CAS (0x3 << 5) // (SDRC) CAS Latency -#define AT91C_SDRC_CAS_2 (0x2 << 5) // (SDRC) 2 cycles -#define AT91C_SDRC_TWR (0xF << 7) // (SDRC) Number of Write Recovery Time Cycles -#define AT91C_SDRC_TRC (0xF << 11) // (SDRC) Number of RAS Cycle Time Cycles -#define AT91C_SDRC_TRP (0xF << 15) // (SDRC) Number of RAS Precharge Time Cycles -#define AT91C_SDRC_TRCD (0xF << 19) // (SDRC) Number of RAS to CAS Delay Cycles -#define AT91C_SDRC_TRAS (0xF << 23) // (SDRC) Number of RAS Active Time Cycles -#define AT91C_SDRC_TXSR (0xF << 27) // (SDRC) Number of Command Recovery Time Cycles -// -------- SDRC_SRR : (SDRC Offset: 0xc) SDRAM Controller Self-refresh Register -------- -#define AT91C_SDRC_SRCB (0x1 << 0) // (SDRC) Self-refresh Command Bit -// -------- SDRC_LPR : (SDRC Offset: 0x10) SDRAM Controller Low-power Register -------- -#define AT91C_SDRC_LPCB (0x1 << 0) // (SDRC) Low-power Command Bit -// -------- SDRC_IER : (SDRC Offset: 0x14) SDRAM Controller Interrupt Enable Register -------- -#define AT91C_SDRC_RES (0x1 << 0) // (SDRC) Refresh Error Status -// -------- SDRC_IDR : (SDRC Offset: 0x18) SDRAM Controller Interrupt Disable Register -------- -// -------- SDRC_IMR : (SDRC Offset: 0x1c) SDRAM Controller Interrupt Mask Register -------- -// -------- SDRC_ISR : (SDRC Offset: 0x20) SDRAM Controller Interrupt Status Register -------- - -// ***************************************************************************** -// SOFTWARE API DEFINITION FOR Burst Flash Controller Interface -// ***************************************************************************** -// *** Register offset in AT91S_BFC structure *** -#define BFC_MR ( 0) // BFC Mode Register -// -------- BFC_MR : (BFC Offset: 0x0) BFC Mode Register -------- -#define AT91C_BFC_BFCOM (0x3 << 0) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCOM_DISABLED (0x0) // (BFC) NPCS0 is driven by the SMC or remains high. -#define AT91C_BFC_BFCOM_ASYNC (0x1) // (BFC) Asynchronous -#define AT91C_BFC_BFCOM_BURST_READ (0x2) // (BFC) Burst Read -#define AT91C_BFC_BFCC (0x3 << 2) // (BFC) Burst Flash Controller Operating Mode -#define AT91C_BFC_BFCC_MCK (0x1 << 2) // (BFC) Master Clock. -#define AT91C_BFC_BFCC_MCK_DIV_2 (0x2 << 2) // (BFC) Master Clock divided by 2. -#define AT91C_BFC_BFCC_MCK_DIV_4 (0x3 << 2) // (BFC) Master Clock divided by 4. -#define AT91C_BFC_AVL (0xF << 4) // (BFC) Address Valid Latency -#define AT91C_BFC_PAGES (0x7 << 8) // (BFC) Page Size -#define AT91C_BFC_PAGES_NO_PAGE (0x0 << 8) // (BFC) No page handling. -#define AT91C_BFC_PAGES_16 (0x1 << 8) // (BFC) 16 bytes page size. -#define AT91C_BFC_PAGES_32 (0x2 << 8) // (BFC) 32 bytes page size. -#define AT91C_BFC_PAGES_64 (0x3 << 8) // (BFC) 64 bytes page size. -#define AT91C_BFC_PAGES_128 (0x4 << 8) // (BFC) 128 bytes page size. -#define AT91C_BFC_PAGES_256 (0x5 << 8) // (BFC) 256 bytes page size. -#define AT91C_BFC_PAGES_512 (0x6 << 8) // (BFC) 512 bytes page size. -#define AT91C_BFC_PAGES_1024 (0x7 << 8) // (BFC) 1024 bytes page size. -#define AT91C_BFC_OEL (0x3 << 12) // (BFC) Output Enable Latency -#define AT91C_BFC_BAAEN (0x1 << 16) // (BFC) Burst Address Advance Enable -#define AT91C_BFC_BFOEH (0x1 << 17) // (BFC) Burst Flash Output Enable Handling -#define AT91C_BFC_MUXEN (0x1 << 18) // (BFC) Multiplexed Bus Enable -#define AT91C_BFC_RDYEN (0x1 << 19) // (BFC) Ready Enable Mode - -// ***************************************************************************** -// REGISTER ADDRESS DEFINITION FOR AT91RM9200 -// ***************************************************************************** -// ========== Register definition for SYS peripheral ========== -// ========== Register definition for MC peripheral ========== -#define AT91C_MC_PUER (0xFFFFFF54) // (MC) MC Protection Unit Enable Register -#define AT91C_MC_ASR (0xFFFFFF04) // (MC) MC Abort Status Register -#define AT91C_MC_PUP (0xFFFFFF50) // (MC) MC Protection Unit Peripherals -#define AT91C_MC_PUIA (0xFFFFFF10) // (MC) MC Protection Unit Area -#define AT91C_MC_AASR (0xFFFFFF08) // (MC) MC Abort Address Status Register -#define AT91C_MC_RCR (0xFFFFFF00) // (MC) MC Remap Control Register -// ========== Register definition for RTC peripheral ========== -#define AT91C_RTC_IMR (0xFFFFFE28) // (RTC) Interrupt Mask Register -#define AT91C_RTC_IER (0xFFFFFE20) // (RTC) Interrupt Enable Register -#define AT91C_RTC_SR (0xFFFFFE18) // (RTC) Status Register -#define AT91C_RTC_TIMALR (0xFFFFFE10) // (RTC) Time Alarm Register -#define AT91C_RTC_TIMR (0xFFFFFE08) // (RTC) Time Register -#define AT91C_RTC_CR (0xFFFFFE00) // (RTC) Control Register -#define AT91C_RTC_VER (0xFFFFFE2C) // (RTC) Valid Entry Register -#define AT91C_RTC_IDR (0xFFFFFE24) // (RTC) Interrupt Disable Register -#define AT91C_RTC_SCCR (0xFFFFFE1C) // (RTC) Status Clear Command Register -#define AT91C_RTC_CALALR (0xFFFFFE14) // (RTC) Calendar Alarm Register -#define AT91C_RTC_CALR (0xFFFFFE0C) // (RTC) Calendar Register -#define AT91C_RTC_MR (0xFFFFFE04) // (RTC) Mode Register -// ========== Register definition for ST peripheral ========== -#define AT91C_ST_CRTR (0xFFFFFD24) // (ST) Current Real-time Register -#define AT91C_ST_IMR (0xFFFFFD1C) // (ST) Interrupt Mask Register -#define AT91C_ST_IER (0xFFFFFD14) // (ST) Interrupt Enable Register -#define AT91C_ST_RTMR (0xFFFFFD0C) // (ST) Real-time Mode Register -#define AT91C_ST_PIMR (0xFFFFFD04) // (ST) Period Interval Mode Register -#define AT91C_ST_RTAR (0xFFFFFD20) // (ST) Real-time Alarm Register -#define AT91C_ST_IDR (0xFFFFFD18) // (ST) Interrupt Disable Register -#define AT91C_ST_SR (0xFFFFFD10) // (ST) Status Register -#define AT91C_ST_WDMR (0xFFFFFD08) // (ST) Watchdog Mode Register -#define AT91C_ST_CR (0xFFFFFD00) // (ST) Control Register -// ========== Register definition for PMC peripheral ========== -#define AT91C_PMC_SCSR (0xFFFFFC08) // (PMC) System Clock Status Register -#define AT91C_PMC_SCER (0xFFFFFC00) // (PMC) System Clock Enable Register -#define AT91C_PMC_IMR (0xFFFFFC6C) // (PMC) Interrupt Mask Register -#define AT91C_PMC_IDR (0xFFFFFC64) // (PMC) Interrupt Disable Register -#define AT91C_PMC_PCDR (0xFFFFFC14) // (PMC) Peripheral Clock Disable Register -#define AT91C_PMC_SCDR (0xFFFFFC04) // (PMC) System Clock Disable Register -#define AT91C_PMC_SR (0xFFFFFC68) // (PMC) Status Register -#define AT91C_PMC_IER (0xFFFFFC60) // (PMC) Interrupt Enable Register -#define AT91C_PMC_MCKR (0xFFFFFC30) // (PMC) Master Clock Register -#define AT91C_PMC_PCER (0xFFFFFC10) // (PMC) Peripheral Clock Enable Register -#define AT91C_PMC_PCSR (0xFFFFFC18) // (PMC) Peripheral Clock Status Register -#define AT91C_PMC_PCKR (0xFFFFFC40) // (PMC) Programmable Clock Register -// ========== Register definition for CKGR peripheral ========== -#define AT91C_CKGR_PLLBR (0xFFFFFC2C) // (CKGR) PLL B Register -#define AT91C_CKGR_MCFR (0xFFFFFC24) // (CKGR) Main Clock Frequency Register -#define AT91C_CKGR_PLLAR (0xFFFFFC28) // (CKGR) PLL A Register -#define AT91C_CKGR_MOR (0xFFFFFC20) // (CKGR) Main Oscillator Register -// ========== Register definition for PIOD peripheral ========== -#define AT91C_PIOD_PDSR (0xFFFFFA3C) // (PIOD) Pin Data Status Register -#define AT91C_PIOD_CODR (0xFFFFFA34) // (PIOD) Clear Output Data Register -#define AT91C_PIOD_OWER (0xFFFFFAA0) // (PIOD) Output Write Enable Register -#define AT91C_PIOD_MDER (0xFFFFFA50) // (PIOD) Multi-driver Enable Register -#define AT91C_PIOD_IMR (0xFFFFFA48) // (PIOD) Interrupt Mask Register -#define AT91C_PIOD_IER (0xFFFFFA40) // (PIOD) Interrupt Enable Register -#define AT91C_PIOD_ODSR (0xFFFFFA38) // (PIOD) Output Data Status Register -#define AT91C_PIOD_SODR (0xFFFFFA30) // (PIOD) Set Output Data Register -#define AT91C_PIOD_PER (0xFFFFFA00) // (PIOD) PIO Enable Register -#define AT91C_PIOD_OWDR (0xFFFFFAA4) // (PIOD) Output Write Disable Register -#define AT91C_PIOD_PPUER (0xFFFFFA64) // (PIOD) Pull-up Enable Register -#define AT91C_PIOD_MDDR (0xFFFFFA54) // (PIOD) Multi-driver Disable Register -#define AT91C_PIOD_ISR (0xFFFFFA4C) // (PIOD) Interrupt Status Register -#define AT91C_PIOD_IDR (0xFFFFFA44) // (PIOD) Interrupt Disable Register -#define AT91C_PIOD_PDR (0xFFFFFA04) // (PIOD) PIO Disable Register -#define AT91C_PIOD_ODR (0xFFFFFA14) // (PIOD) Output Disable Registerr -#define AT91C_PIOD_OWSR (0xFFFFFAA8) // (PIOD) Output Write Status Register -#define AT91C_PIOD_ABSR (0xFFFFFA78) // (PIOD) AB Select Status Register -#define AT91C_PIOD_ASR (0xFFFFFA70) // (PIOD) Select A Register -#define AT91C_PIOD_PPUSR (0xFFFFFA68) // (PIOD) Pad Pull-up Status Register -#define AT91C_PIOD_PPUDR (0xFFFFFA60) // (PIOD) Pull-up Disable Register -#define AT91C_PIOD_MDSR (0xFFFFFA58) // (PIOD) Multi-driver Status Register -#define AT91C_PIOD_PSR (0xFFFFFA08) // (PIOD) PIO Status Register -#define AT91C_PIOD_OER (0xFFFFFA10) // (PIOD) Output Enable Register -#define AT91C_PIOD_OSR (0xFFFFFA18) // (PIOD) Output Status Register -#define AT91C_PIOD_IFER (0xFFFFFA20) // (PIOD) Input Filter Enable Register -#define AT91C_PIOD_BSR (0xFFFFFA74) // (PIOD) Select B Register -#define AT91C_PIOD_IFDR (0xFFFFFA24) // (PIOD) Input Filter Disable Register -#define AT91C_PIOD_IFSR (0xFFFFFA28) // (PIOD) Input Filter Status Register -// ========== Register definition for PIOC peripheral ========== -#define AT91C_PIOC_IFDR (0xFFFFF824) // (PIOC) Input Filter Disable Register -#define AT91C_PIOC_ODR (0xFFFFF814) // (PIOC) Output Disable Registerr -#define AT91C_PIOC_ABSR (0xFFFFF878) // (PIOC) AB Select Status Register -#define AT91C_PIOC_SODR (0xFFFFF830) // (PIOC) Set Output Data Register -#define AT91C_PIOC_IFSR (0xFFFFF828) // (PIOC) Input Filter Status Register -#define AT91C_PIOC_CODR (0xFFFFF834) // (PIOC) Clear Output Data Register -#define AT91C_PIOC_ODSR (0xFFFFF838) // (PIOC) Output Data Status Register -#define AT91C_PIOC_IER (0xFFFFF840) // (PIOC) Interrupt Enable Register -#define AT91C_PIOC_IMR (0xFFFFF848) // (PIOC) Interrupt Mask Register -#define AT91C_PIOC_OWDR (0xFFFFF8A4) // (PIOC) Output Write Disable Register -#define AT91C_PIOC_MDDR (0xFFFFF854) // (PIOC) Multi-driver Disable Register -#define AT91C_PIOC_PDSR (0xFFFFF83C) // (PIOC) Pin Data Status Register -#define AT91C_PIOC_IDR (0xFFFFF844) // (PIOC) Interrupt Disable Register -#define AT91C_PIOC_ISR (0xFFFFF84C) // (PIOC) Interrupt Status Register -#define AT91C_PIOC_PDR (0xFFFFF804) // (PIOC) PIO Disable Register -#define AT91C_PIOC_OWSR (0xFFFFF8A8) // (PIOC) Output Write Status Register -#define AT91C_PIOC_OWER (0xFFFFF8A0) // (PIOC) Output Write Enable Register -#define AT91C_PIOC_ASR (0xFFFFF870) // (PIOC) Select A Register -#define AT91C_PIOC_PPUSR (0xFFFFF868) // (PIOC) Pad Pull-up Status Register -#define AT91C_PIOC_PPUDR (0xFFFFF860) // (PIOC) Pull-up Disable Register -#define AT91C_PIOC_MDSR (0xFFFFF858) // (PIOC) Multi-driver Status Register -#define AT91C_PIOC_MDER (0xFFFFF850) // (PIOC) Multi-driver Enable Register -#define AT91C_PIOC_IFER (0xFFFFF820) // (PIOC) Input Filter Enable Register -#define AT91C_PIOC_OSR (0xFFFFF818) // (PIOC) Output Status Register -#define AT91C_PIOC_OER (0xFFFFF810) // (PIOC) Output Enable Register -#define AT91C_PIOC_PSR (0xFFFFF808) // (PIOC) PIO Status Register -#define AT91C_PIOC_PER (0xFFFFF800) // (PIOC) PIO Enable Register -#define AT91C_PIOC_BSR (0xFFFFF874) // (PIOC) Select B Register -#define AT91C_PIOC_PPUER (0xFFFFF864) // (PIOC) Pull-up Enable Register -// ========== Register definition for PIOB peripheral ========== -#define AT91C_PIOB_OWSR (0xFFFFF6A8) // (PIOB) Output Write Status Register -#define AT91C_PIOB_PPUSR (0xFFFFF668) // (PIOB) Pad Pull-up Status Register -#define AT91C_PIOB_PPUDR (0xFFFFF660) // (PIOB) Pull-up Disable Register -#define AT91C_PIOB_MDSR (0xFFFFF658) // (PIOB) Multi-driver Status Register -#define AT91C_PIOB_MDER (0xFFFFF650) // (PIOB) Multi-driver Enable Register -#define AT91C_PIOB_IMR (0xFFFFF648) // (PIOB) Interrupt Mask Register -#define AT91C_PIOB_OSR (0xFFFFF618) // (PIOB) Output Status Register -#define AT91C_PIOB_OER (0xFFFFF610) // (PIOB) Output Enable Register -#define AT91C_PIOB_PSR (0xFFFFF608) // (PIOB) PIO Status Register -#define AT91C_PIOB_PER (0xFFFFF600) // (PIOB) PIO Enable Register -#define AT91C_PIOB_BSR (0xFFFFF674) // (PIOB) Select B Register -#define AT91C_PIOB_PPUER (0xFFFFF664) // (PIOB) Pull-up Enable Register -#define AT91C_PIOB_IFDR (0xFFFFF624) // (PIOB) Input Filter Disable Register -#define AT91C_PIOB_ODR (0xFFFFF614) // (PIOB) Output Disable Registerr -#define AT91C_PIOB_ABSR (0xFFFFF678) // (PIOB) AB Select Status Register -#define AT91C_PIOB_ASR (0xFFFFF670) // (PIOB) Select A Register -#define AT91C_PIOB_IFER (0xFFFFF620) // (PIOB) Input Filter Enable Register -#define AT91C_PIOB_IFSR (0xFFFFF628) // (PIOB) Input Filter Status Register -#define AT91C_PIOB_SODR (0xFFFFF630) // (PIOB) Set Output Data Register -#define AT91C_PIOB_ODSR (0xFFFFF638) // (PIOB) Output Data Status Register -#define AT91C_PIOB_CODR (0xFFFFF634) // (PIOB) Clear Output Data Register -#define AT91C_PIOB_PDSR (0xFFFFF63C) // (PIOB) Pin Data Status Register -#define AT91C_PIOB_OWER (0xFFFFF6A0) // (PIOB) Output Write Enable Register -#define AT91C_PIOB_IER (0xFFFFF640) // (PIOB) Interrupt Enable Register -#define AT91C_PIOB_OWDR (0xFFFFF6A4) // (PIOB) Output Write Disable Register -#define AT91C_PIOB_MDDR (0xFFFFF654) // (PIOB) Multi-driver Disable Register -#define AT91C_PIOB_ISR (0xFFFFF64C) // (PIOB) Interrupt Status Register -#define AT91C_PIOB_IDR (0xFFFFF644) // (PIOB) Interrupt Disable Register -#define AT91C_PIOB_PDR (0xFFFFF604) // (PIOB) PIO Disable Register -// ========== Register definition for PIOA peripheral ========== -#define AT91C_PIOA_IMR (0xFFFFF448) // (PIOA) Interrupt Mask Register -#define AT91C_PIOA_IER (0xFFFFF440) // (PIOA) Interrupt Enable Register -#define AT91C_PIOA_OWDR (0xFFFFF4A4) // (PIOA) Output Write Disable Register -#define AT91C_PIOA_ISR (0xFFFFF44C) // (PIOA) Interrupt Status Register -#define AT91C_PIOA_PPUDR (0xFFFFF460) // (PIOA) Pull-up Disable Register -#define AT91C_PIOA_MDSR (0xFFFFF458) // (PIOA) Multi-driver Status Register -#define AT91C_PIOA_MDER (0xFFFFF450) // (PIOA) Multi-driver Enable Register -#define AT91C_PIOA_PER (0xFFFFF400) // (PIOA) PIO Enable Register -#define AT91C_PIOA_PSR (0xFFFFF408) // (PIOA) PIO Status Register -#define AT91C_PIOA_OER (0xFFFFF410) // (PIOA) Output Enable Register -#define AT91C_PIOA_BSR (0xFFFFF474) // (PIOA) Select B Register -#define AT91C_PIOA_PPUER (0xFFFFF464) // (PIOA) Pull-up Enable Register -#define AT91C_PIOA_MDDR (0xFFFFF454) // (PIOA) Multi-driver Disable Register -#define AT91C_PIOA_PDR (0xFFFFF404) // (PIOA) PIO Disable Register -#define AT91C_PIOA_ODR (0xFFFFF414) // (PIOA) Output Disable Registerr -#define AT91C_PIOA_IFDR (0xFFFFF424) // (PIOA) Input Filter Disable Register -#define AT91C_PIOA_ABSR (0xFFFFF478) // (PIOA) AB Select Status Register -#define AT91C_PIOA_ASR (0xFFFFF470) // (PIOA) Select A Register -#define AT91C_PIOA_PPUSR (0xFFFFF468) // (PIOA) Pad Pull-up Status Register -#define AT91C_PIOA_ODSR (0xFFFFF438) // (PIOA) Output Data Status Register -#define AT91C_PIOA_SODR (0xFFFFF430) // (PIOA) Set Output Data Register -#define AT91C_PIOA_IFSR (0xFFFFF428) // (PIOA) Input Filter Status Register -#define AT91C_PIOA_IFER (0xFFFFF420) // (PIOA) Input Filter Enable Register -#define AT91C_PIOA_OSR (0xFFFFF418) // (PIOA) Output Status Register -#define AT91C_PIOA_IDR (0xFFFFF444) // (PIOA) Interrupt Disable Register -#define AT91C_PIOA_PDSR (0xFFFFF43C) // (PIOA) Pin Data Status Register -#define AT91C_PIOA_CODR (0xFFFFF434) // (PIOA) Clear Output Data Register -#define AT91C_PIOA_OWSR (0xFFFFF4A8) // (PIOA) Output Write Status Register -#define AT91C_PIOA_OWER (0xFFFFF4A0) // (PIOA) Output Write Enable Register -// ========== Register definition for DBGU peripheral ========== -#define AT91C_DBGU_C2R (0xFFFFF244) // (DBGU) Chip ID2 Register -#define AT91C_DBGU_THR (0xFFFFF21C) // (DBGU) Transmitter Holding Register -#define AT91C_DBGU_CSR (0xFFFFF214) // (DBGU) Channel Status Register -#define AT91C_DBGU_IDR (0xFFFFF20C) // (DBGU) Interrupt Disable Register -#define AT91C_DBGU_MR (0xFFFFF204) // (DBGU) Mode Register -#define AT91C_DBGU_FNTR (0xFFFFF248) // (DBGU) Force NTRST Register -#define AT91C_DBGU_C1R (0xFFFFF240) // (DBGU) Chip ID1 Register -#define AT91C_DBGU_BRGR (0xFFFFF220) // (DBGU) Baud Rate Generator Register -#define AT91C_DBGU_RHR (0xFFFFF218) // (DBGU) Receiver Holding Register -#define AT91C_DBGU_IMR (0xFFFFF210) // (DBGU) Interrupt Mask Register -#define AT91C_DBGU_IER (0xFFFFF208) // (DBGU) Interrupt Enable Register -#define AT91C_DBGU_CR (0xFFFFF200) // (DBGU) Control Register -// ========== Register definition for PDC_DBGU peripheral ========== -#define AT91C_DBGU_TNCR (0xFFFFF31C) // (PDC_DBGU) Transmit Next Counter Register -#define AT91C_DBGU_RNCR (0xFFFFF314) // (PDC_DBGU) Receive Next Counter Register -#define AT91C_DBGU_PTCR (0xFFFFF320) // (PDC_DBGU) PDC Transfer Control Register -#define AT91C_DBGU_PTSR (0xFFFFF324) // (PDC_DBGU) PDC Transfer Status Register -#define AT91C_DBGU_RCR (0xFFFFF304) // (PDC_DBGU) Receive Counter Register -#define AT91C_DBGU_TCR (0xFFFFF30C) // (PDC_DBGU) Transmit Counter Register -#define AT91C_DBGU_RPR (0xFFFFF300) // (PDC_DBGU) Receive Pointer Register -#define AT91C_DBGU_TPR (0xFFFFF308) // (PDC_DBGU) Transmit Pointer Register -#define AT91C_DBGU_RNPR (0xFFFFF310) // (PDC_DBGU) Receive Next Pointer Register -#define AT91C_DBGU_TNPR (0xFFFFF318) // (PDC_DBGU) Transmit Next Pointer Register -// ========== Register definition for AIC peripheral ========== -#define AT91C_AIC_ICCR (0xFFFFF128) // (AIC) Interrupt Clear Command Register -#define AT91C_AIC_IECR (0xFFFFF120) // (AIC) Interrupt Enable Command Register -#define AT91C_AIC_SMR (0xFFFFF000) // (AIC) Source Mode Register -#define AT91C_AIC_ISCR (0xFFFFF12C) // (AIC) Interrupt Set Command Register -#define AT91C_AIC_EOICR (0xFFFFF130) // (AIC) End of Interrupt Command Register -#define AT91C_AIC_DCR (0xFFFFF138) // (AIC) Debug Control Register (Protect) -#define AT91C_AIC_FFER (0xFFFFF140) // (AIC) Fast Forcing Enable Register -#define AT91C_AIC_SVR (0xFFFFF080) // (AIC) Source Vector Register -#define AT91C_AIC_SPU (0xFFFFF134) // (AIC) Spurious Vector Register -#define AT91C_AIC_FFDR (0xFFFFF144) // (AIC) Fast Forcing Disable Register -#define AT91C_AIC_FVR (0xFFFFF104) // (AIC) FIQ Vector Register -#define AT91C_AIC_FFSR (0xFFFFF148) // (AIC) Fast Forcing Status Register -#define AT91C_AIC_IMR (0xFFFFF110) // (AIC) Interrupt Mask Register -#define AT91C_AIC_ISR (0xFFFFF108) // (AIC) Interrupt Status Register -#define AT91C_AIC_IVR (0xFFFFF100) // (AIC) IRQ Vector Register -#define AT91C_AIC_IDCR (0xFFFFF124) // (AIC) Interrupt Disable Command Register -#define AT91C_AIC_CISR (0xFFFFF114) // (AIC) Core Interrupt Status Register -#define AT91C_AIC_IPR (0xFFFFF10C) // (AIC) Interrupt Pending Register -// ========== Register definition for PDC_SPI peripheral ========== -#define AT91C_SPI_PTCR (0xFFFE0120) // (PDC_SPI) PDC Transfer Control Register -#define AT91C_SPI_TNPR (0xFFFE0118) // (PDC_SPI) Transmit Next Pointer Register -#define AT91C_SPI_RNPR (0xFFFE0110) // (PDC_SPI) Receive Next Pointer Register -#define AT91C_SPI_TPR (0xFFFE0108) // (PDC_SPI) Transmit Pointer Register -#define AT91C_SPI_RPR (0xFFFE0100) // (PDC_SPI) Receive Pointer Register -#define AT91C_SPI_PTSR (0xFFFE0124) // (PDC_SPI) PDC Transfer Status Register -#define AT91C_SPI_TNCR (0xFFFE011C) // (PDC_SPI) Transmit Next Counter Register -#define AT91C_SPI_RNCR (0xFFFE0114) // (PDC_SPI) Receive Next Counter Register -#define AT91C_SPI_TCR (0xFFFE010C) // (PDC_SPI) Transmit Counter Register -#define AT91C_SPI_RCR (0xFFFE0104) // (PDC_SPI) Receive Counter Register -// ========== Register definition for SPI peripheral ========== -#define AT91C_SPI_CSR (0xFFFE0030) // (SPI) Chip Select Register -#define AT91C_SPI_IDR (0xFFFE0018) // (SPI) Interrupt Disable Register -#define AT91C_SPI_SR (0xFFFE0010) // (SPI) Status Register -#define AT91C_SPI_RDR (0xFFFE0008) // (SPI) Receive Data Register -#define AT91C_SPI_CR (0xFFFE0000) // (SPI) Control Register -#define AT91C_SPI_IMR (0xFFFE001C) // (SPI) Interrupt Mask Register -#define AT91C_SPI_IER (0xFFFE0014) // (SPI) Interrupt Enable Register -#define AT91C_SPI_TDR (0xFFFE000C) // (SPI) Transmit Data Register -#define AT91C_SPI_MR (0xFFFE0004) // (SPI) Mode Register -// ========== Register definition for PDC_SSC2 peripheral ========== -#define AT91C_SSC2_PTCR (0xFFFD8120) // (PDC_SSC2) PDC Transfer Control Register -#define AT91C_SSC2_TNPR (0xFFFD8118) // (PDC_SSC2) Transmit Next Pointer Register -#define AT91C_SSC2_RNPR (0xFFFD8110) // (PDC_SSC2) Receive Next Pointer Register -#define AT91C_SSC2_TPR (0xFFFD8108) // (PDC_SSC2) Transmit Pointer Register -#define AT91C_SSC2_RPR (0xFFFD8100) // (PDC_SSC2) Receive Pointer Register -#define AT91C_SSC2_PTSR (0xFFFD8124) // (PDC_SSC2) PDC Transfer Status Register -#define AT91C_SSC2_TNCR (0xFFFD811C) // (PDC_SSC2) Transmit Next Counter Register -#define AT91C_SSC2_RNCR (0xFFFD8114) // (PDC_SSC2) Receive Next Counter Register -#define AT91C_SSC2_TCR (0xFFFD810C) // (PDC_SSC2) Transmit Counter Register -#define AT91C_SSC2_RCR (0xFFFD8104) // (PDC_SSC2) Receive Counter Register -// ========== Register definition for SSC2 peripheral ========== -#define AT91C_SSC2_IMR (0xFFFD804C) // (SSC2) Interrupt Mask Register -#define AT91C_SSC2_IER (0xFFFD8044) // (SSC2) Interrupt Enable Register -#define AT91C_SSC2_RC1R (0xFFFD803C) // (SSC2) Receive Compare 1 Register -#define AT91C_SSC2_TSHR (0xFFFD8034) // (SSC2) Transmit Sync Holding Register -#define AT91C_SSC2_CMR (0xFFFD8004) // (SSC2) Clock Mode Register -#define AT91C_SSC2_IDR (0xFFFD8048) // (SSC2) Interrupt Disable Register -#define AT91C_SSC2_TCMR (0xFFFD8018) // (SSC2) Transmit Clock Mode Register -#define AT91C_SSC2_RCMR (0xFFFD8010) // (SSC2) Receive Clock ModeRegister -#define AT91C_SSC2_CR (0xFFFD8000) // (SSC2) Control Register -#define AT91C_SSC2_RFMR (0xFFFD8014) // (SSC2) Receive Frame Mode Register -#define AT91C_SSC2_TFMR (0xFFFD801C) // (SSC2) Transmit Frame Mode Register -#define AT91C_SSC2_THR (0xFFFD8024) // (SSC2) Transmit Holding Register -#define AT91C_SSC2_SR (0xFFFD8040) // (SSC2) Status Register -#define AT91C_SSC2_RC0R (0xFFFD8038) // (SSC2) Receive Compare 0 Register -#define AT91C_SSC2_RSHR (0xFFFD8030) // (SSC2) Receive Sync Holding Register -#define AT91C_SSC2_RHR (0xFFFD8020) // (SSC2) Receive Holding Register -// ========== Register definition for PDC_SSC1 peripheral ========== -#define AT91C_SSC1_PTCR (0xFFFD4120) // (PDC_SSC1) PDC Transfer Control Register -#define AT91C_SSC1_TNPR (0xFFFD4118) // (PDC_SSC1) Transmit Next Pointer Register -#define AT91C_SSC1_RNPR (0xFFFD4110) // (PDC_SSC1) Receive Next Pointer Register -#define AT91C_SSC1_TPR (0xFFFD4108) // (PDC_SSC1) Transmit Pointer Register -#define AT91C_SSC1_RPR (0xFFFD4100) // (PDC_SSC1) Receive Pointer Register -#define AT91C_SSC1_PTSR (0xFFFD4124) // (PDC_SSC1) PDC Transfer Status Register -#define AT91C_SSC1_TNCR (0xFFFD411C) // (PDC_SSC1) Transmit Next Counter Register -#define AT91C_SSC1_RNCR (0xFFFD4114) // (PDC_SSC1) Receive Next Counter Register -#define AT91C_SSC1_TCR (0xFFFD410C) // (PDC_SSC1) Transmit Counter Register -#define AT91C_SSC1_RCR (0xFFFD4104) // (PDC_SSC1) Receive Counter Register -// ========== Register definition for SSC1 peripheral ========== -#define AT91C_SSC1_RFMR (0xFFFD4014) // (SSC1) Receive Frame Mode Register -#define AT91C_SSC1_CMR (0xFFFD4004) // (SSC1) Clock Mode Register -#define AT91C_SSC1_IDR (0xFFFD4048) // (SSC1) Interrupt Disable Register -#define AT91C_SSC1_SR (0xFFFD4040) // (SSC1) Status Register -#define AT91C_SSC1_RC0R (0xFFFD4038) // (SSC1) Receive Compare 0 Register -#define AT91C_SSC1_RSHR (0xFFFD4030) // (SSC1) Receive Sync Holding Register -#define AT91C_SSC1_RHR (0xFFFD4020) // (SSC1) Receive Holding Register -#define AT91C_SSC1_TCMR (0xFFFD4018) // (SSC1) Transmit Clock Mode Register -#define AT91C_SSC1_RCMR (0xFFFD4010) // (SSC1) Receive Clock ModeRegister -#define AT91C_SSC1_CR (0xFFFD4000) // (SSC1) Control Register -#define AT91C_SSC1_IMR (0xFFFD404C) // (SSC1) Interrupt Mask Register -#define AT91C_SSC1_IER (0xFFFD4044) // (SSC1) Interrupt Enable Register -#define AT91C_SSC1_RC1R (0xFFFD403C) // (SSC1) Receive Compare 1 Register -#define AT91C_SSC1_TSHR (0xFFFD4034) // (SSC1) Transmit Sync Holding Register -#define AT91C_SSC1_THR (0xFFFD4024) // (SSC1) Transmit Holding Register -#define AT91C_SSC1_TFMR (0xFFFD401C) // (SSC1) Transmit Frame Mode Register -// ========== Register definition for PDC_SSC0 peripheral ========== -#define AT91C_SSC0_PTCR (0xFFFD0120) // (PDC_SSC0) PDC Transfer Control Register -#define AT91C_SSC0_TNPR (0xFFFD0118) // (PDC_SSC0) Transmit Next Pointer Register -#define AT91C_SSC0_RNPR (0xFFFD0110) // (PDC_SSC0) Receive Next Pointer Register -#define AT91C_SSC0_TPR (0xFFFD0108) // (PDC_SSC0) Transmit Pointer Register -#define AT91C_SSC0_RPR (0xFFFD0100) // (PDC_SSC0) Receive Pointer Register -#define AT91C_SSC0_PTSR (0xFFFD0124) // (PDC_SSC0) PDC Transfer Status Register -#define AT91C_SSC0_TNCR (0xFFFD011C) // (PDC_SSC0) Transmit Next Counter Register -#define AT91C_SSC0_RNCR (0xFFFD0114) // (PDC_SSC0) Receive Next Counter Register -#define AT91C_SSC0_TCR (0xFFFD010C) // (PDC_SSC0) Transmit Counter Register -#define AT91C_SSC0_RCR (0xFFFD0104) // (PDC_SSC0) Receive Counter Register -// ========== Register definition for SSC0 peripheral ========== -#define AT91C_SSC0_IMR (0xFFFD004C) // (SSC0) Interrupt Mask Register -#define AT91C_SSC0_IER (0xFFFD0044) // (SSC0) Interrupt Enable Register -#define AT91C_SSC0_RC1R (0xFFFD003C) // (SSC0) Receive Compare 1 Register -#define AT91C_SSC0_TSHR (0xFFFD0034) // (SSC0) Transmit Sync Holding Register -#define AT91C_SSC0_THR (0xFFFD0024) // (SSC0) Transmit Holding Register -#define AT91C_SSC0_TFMR (0xFFFD001C) // (SSC0) Transmit Frame Mode Register -#define AT91C_SSC0_RFMR (0xFFFD0014) // (SSC0) Receive Frame Mode Register -#define AT91C_SSC0_CMR (0xFFFD0004) // (SSC0) Clock Mode Register -#define AT91C_SSC0_IDR (0xFFFD0048) // (SSC0) Interrupt Disable Register -#define AT91C_SSC0_SR (0xFFFD0040) // (SSC0) Status Register -#define AT91C_SSC0_RC0R (0xFFFD0038) // (SSC0) Receive Compare 0 Register -#define AT91C_SSC0_RSHR (0xFFFD0030) // (SSC0) Receive Sync Holding Register -#define AT91C_SSC0_RHR (0xFFFD0020) // (SSC0) Receive Holding Register -#define AT91C_SSC0_TCMR (0xFFFD0018) // (SSC0) Transmit Clock Mode Register -#define AT91C_SSC0_RCMR (0xFFFD0010) // (SSC0) Receive Clock ModeRegister -#define AT91C_SSC0_CR (0xFFFD0000) // (SSC0) Control Register -// ========== Register definition for PDC_US3 peripheral ========== -#define AT91C_US3_PTSR (0xFFFCC124) // (PDC_US3) PDC Transfer Status Register -#define AT91C_US3_TNCR (0xFFFCC11C) // (PDC_US3) Transmit Next Counter Register -#define AT91C_US3_RNCR (0xFFFCC114) // (PDC_US3) Receive Next Counter Register -#define AT91C_US3_TCR (0xFFFCC10C) // (PDC_US3) Transmit Counter Register -#define AT91C_US3_RCR (0xFFFCC104) // (PDC_US3) Receive Counter Register -#define AT91C_US3_PTCR (0xFFFCC120) // (PDC_US3) PDC Transfer Control Register -#define AT91C_US3_TNPR (0xFFFCC118) // (PDC_US3) Transmit Next Pointer Register -#define AT91C_US3_RNPR (0xFFFCC110) // (PDC_US3) Receive Next Pointer Register -#define AT91C_US3_TPR (0xFFFCC108) // (PDC_US3) Transmit Pointer Register -#define AT91C_US3_RPR (0xFFFCC100) // (PDC_US3) Receive Pointer Register -// ========== Register definition for US3 peripheral ========== -#define AT91C_US3_IF (0xFFFCC04C) // (US3) IRDA_FILTER Register -#define AT91C_US3_NER (0xFFFCC044) // (US3) Nb Errors Register -#define AT91C_US3_RTOR (0xFFFCC024) // (US3) Receiver Time-out Register -#define AT91C_US3_THR (0xFFFCC01C) // (US3) Transmitter Holding Register -#define AT91C_US3_CSR (0xFFFCC014) // (US3) Channel Status Register -#define AT91C_US3_IDR (0xFFFCC00C) // (US3) Interrupt Disable Register -#define AT91C_US3_MR (0xFFFCC004) // (US3) Mode Register -#define AT91C_US3_XXR (0xFFFCC048) // (US3) XON_XOFF Register -#define AT91C_US3_FIDI (0xFFFCC040) // (US3) FI_DI_Ratio Register -#define AT91C_US3_TTGR (0xFFFCC028) // (US3) Transmitter Time-guard Register -#define AT91C_US3_BRGR (0xFFFCC020) // (US3) Baud Rate Generator Register -#define AT91C_US3_RHR (0xFFFCC018) // (US3) Receiver Holding Register -#define AT91C_US3_IMR (0xFFFCC010) // (US3) Interrupt Mask Register -#define AT91C_US3_IER (0xFFFCC008) // (US3) Interrupt Enable Register -#define AT91C_US3_CR (0xFFFCC000) // (US3) Control Register -// ========== Register definition for PDC_US2 peripheral ========== -#define AT91C_US2_PTSR (0xFFFC8124) // (PDC_US2) PDC Transfer Status Register -#define AT91C_US2_TNCR (0xFFFC811C) // (PDC_US2) Transmit Next Counter Register -#define AT91C_US2_RNCR (0xFFFC8114) // (PDC_US2) Receive Next Counter Register -#define AT91C_US2_TCR (0xFFFC810C) // (PDC_US2) Transmit Counter Register -#define AT91C_US2_PTCR (0xFFFC8120) // (PDC_US2) PDC Transfer Control Register -#define AT91C_US2_RCR (0xFFFC8104) // (PDC_US2) Receive Counter Register -#define AT91C_US2_TNPR (0xFFFC8118) // (PDC_US2) Transmit Next Pointer Register -#define AT91C_US2_RPR (0xFFFC8100) // (PDC_US2) Receive Pointer Register -#define AT91C_US2_TPR (0xFFFC8108) // (PDC_US2) Transmit Pointer Register -#define AT91C_US2_RNPR (0xFFFC8110) // (PDC_US2) Receive Next Pointer Register -// ========== Register definition for US2 peripheral ========== -#define AT91C_US2_XXR (0xFFFC8048) // (US2) XON_XOFF Register -#define AT91C_US2_FIDI (0xFFFC8040) // (US2) FI_DI_Ratio Register -#define AT91C_US2_TTGR (0xFFFC8028) // (US2) Transmitter Time-guard Register -#define AT91C_US2_BRGR (0xFFFC8020) // (US2) Baud Rate Generator Register -#define AT91C_US2_RHR (0xFFFC8018) // (US2) Receiver Holding Register -#define AT91C_US2_IMR (0xFFFC8010) // (US2) Interrupt Mask Register -#define AT91C_US2_IER (0xFFFC8008) // (US2) Interrupt Enable Register -#define AT91C_US2_CR (0xFFFC8000) // (US2) Control Register -#define AT91C_US2_IF (0xFFFC804C) // (US2) IRDA_FILTER Register -#define AT91C_US2_NER (0xFFFC8044) // (US2) Nb Errors Register -#define AT91C_US2_RTOR (0xFFFC8024) // (US2) Receiver Time-out Register -#define AT91C_US2_THR (0xFFFC801C) // (US2) Transmitter Holding Register -#define AT91C_US2_CSR (0xFFFC8014) // (US2) Channel Status Register -#define AT91C_US2_IDR (0xFFFC800C) // (US2) Interrupt Disable Register -#define AT91C_US2_MR (0xFFFC8004) // (US2) Mode Register -// ========== Register definition for PDC_US1 peripheral ========== -#define AT91C_US1_PTSR (0xFFFC4124) // (PDC_US1) PDC Transfer Status Register -#define AT91C_US1_TNCR (0xFFFC411C) // (PDC_US1) Transmit Next Counter Register -#define AT91C_US1_RNCR (0xFFFC4114) // (PDC_US1) Receive Next Counter Register -#define AT91C_US1_TCR (0xFFFC410C) // (PDC_US1) Transmit Counter Register -#define AT91C_US1_RCR (0xFFFC4104) // (PDC_US1) Receive Counter Register -#define AT91C_US1_PTCR (0xFFFC4120) // (PDC_US1) PDC Transfer Control Register -#define AT91C_US1_TNPR (0xFFFC4118) // (PDC_US1) Transmit Next Pointer Register -#define AT91C_US1_RNPR (0xFFFC4110) // (PDC_US1) Receive Next Pointer Register -#define AT91C_US1_TPR (0xFFFC4108) // (PDC_US1) Transmit Pointer Register -#define AT91C_US1_RPR (0xFFFC4100) // (PDC_US1) Receive Pointer Register -// ========== Register definition for US1 peripheral ========== -#define AT91C_US1_XXR (0xFFFC4048) // (US1) XON_XOFF Register -#define AT91C_US1_RHR (0xFFFC4018) // (US1) Receiver Holding Register -#define AT91C_US1_IMR (0xFFFC4010) // (US1) Interrupt Mask Register -#define AT91C_US1_IER (0xFFFC4008) // (US1) Interrupt Enable Register -#define AT91C_US1_CR (0xFFFC4000) // (US1) Control Register -#define AT91C_US1_RTOR (0xFFFC4024) // (US1) Receiver Time-out Register -#define AT91C_US1_THR (0xFFFC401C) // (US1) Transmitter Holding Register -#define AT91C_US1_CSR (0xFFFC4014) // (US1) Channel Status Register -#define AT91C_US1_IDR (0xFFFC400C) // (US1) Interrupt Disable Register -#define AT91C_US1_FIDI (0xFFFC4040) // (US1) FI_DI_Ratio Register -#define AT91C_US1_BRGR (0xFFFC4020) // (US1) Baud Rate Generator Register -#define AT91C_US1_TTGR (0xFFFC4028) // (US1) Transmitter Time-guard Register -#define AT91C_US1_IF (0xFFFC404C) // (US1) IRDA_FILTER Register -#define AT91C_US1_NER (0xFFFC4044) // (US1) Nb Errors Register -#define AT91C_US1_MR (0xFFFC4004) // (US1) Mode Register -// ========== Register definition for PDC_US0 peripheral ========== -#define AT91C_US0_PTCR (0xFFFC0120) // (PDC_US0) PDC Transfer Control Register -#define AT91C_US0_TNPR (0xFFFC0118) // (PDC_US0) Transmit Next Pointer Register -#define AT91C_US0_RNPR (0xFFFC0110) // (PDC_US0) Receive Next Pointer Register -#define AT91C_US0_TPR (0xFFFC0108) // (PDC_US0) Transmit Pointer Register -#define AT91C_US0_RPR (0xFFFC0100) // (PDC_US0) Receive Pointer Register -#define AT91C_US0_PTSR (0xFFFC0124) // (PDC_US0) PDC Transfer Status Register -#define AT91C_US0_TNCR (0xFFFC011C) // (PDC_US0) Transmit Next Counter Register -#define AT91C_US0_RNCR (0xFFFC0114) // (PDC_US0) Receive Next Counter Register -#define AT91C_US0_TCR (0xFFFC010C) // (PDC_US0) Transmit Counter Register -#define AT91C_US0_RCR (0xFFFC0104) // (PDC_US0) Receive Counter Register -// ========== Register definition for US0 peripheral ========== -#define AT91C_US0_TTGR (0xFFFC0028) // (US0) Transmitter Time-guard Register -#define AT91C_US0_BRGR (0xFFFC0020) // (US0) Baud Rate Generator Register -#define AT91C_US0_RHR (0xFFFC0018) // (US0) Receiver Holding Register -#define AT91C_US0_IMR (0xFFFC0010) // (US0) Interrupt Mask Register -#define AT91C_US0_NER (0xFFFC0044) // (US0) Nb Errors Register -#define AT91C_US0_RTOR (0xFFFC0024) // (US0) Receiver Time-out Register -#define AT91C_US0_XXR (0xFFFC0048) // (US0) XON_XOFF Register -#define AT91C_US0_FIDI (0xFFFC0040) // (US0) FI_DI_Ratio Register -#define AT91C_US0_CR (0xFFFC0000) // (US0) Control Register -#define AT91C_US0_IER (0xFFFC0008) // (US0) Interrupt Enable Register -#define AT91C_US0_IF (0xFFFC004C) // (US0) IRDA_FILTER Register -#define AT91C_US0_MR (0xFFFC0004) // (US0) Mode Register -#define AT91C_US0_IDR (0xFFFC000C) // (US0) Interrupt Disable Register -#define AT91C_US0_CSR (0xFFFC0014) // (US0) Channel Status Register -#define AT91C_US0_THR (0xFFFC001C) // (US0) Transmitter Holding Register -// ========== Register definition for TWI peripheral ========== -#define AT91C_TWI_RHR (0xFFFB8030) // (TWI) Receive Holding Register -#define AT91C_TWI_IDR (0xFFFB8028) // (TWI) Interrupt Disable Register -#define AT91C_TWI_SR (0xFFFB8020) // (TWI) Status Register -#define AT91C_TWI_CWGR (0xFFFB8010) // (TWI) Clock Waveform Generator Register -#define AT91C_TWI_SMR (0xFFFB8008) // (TWI) Slave Mode Register -#define AT91C_TWI_CR (0xFFFB8000) // (TWI) Control Register -#define AT91C_TWI_THR (0xFFFB8034) // (TWI) Transmit Holding Register -#define AT91C_TWI_IMR (0xFFFB802C) // (TWI) Interrupt Mask Register -#define AT91C_TWI_IER (0xFFFB8024) // (TWI) Interrupt Enable Register -#define AT91C_TWI_IADR (0xFFFB800C) // (TWI) Internal Address Register -#define AT91C_TWI_MMR (0xFFFB8004) // (TWI) Master Mode Register -// ========== Register definition for PDC_MCI peripheral ========== -#define AT91C_MCI_PTCR (0xFFFB4120) // (PDC_MCI) PDC Transfer Control Register -#define AT91C_MCI_TNPR (0xFFFB4118) // (PDC_MCI) Transmit Next Pointer Register -#define AT91C_MCI_RNPR (0xFFFB4110) // (PDC_MCI) Receive Next Pointer Register -#define AT91C_MCI_TPR (0xFFFB4108) // (PDC_MCI) Transmit Pointer Register -#define AT91C_MCI_RPR (0xFFFB4100) // (PDC_MCI) Receive Pointer Register -#define AT91C_MCI_PTSR (0xFFFB4124) // (PDC_MCI) PDC Transfer Status Register -#define AT91C_MCI_TNCR (0xFFFB411C) // (PDC_MCI) Transmit Next Counter Register -#define AT91C_MCI_RNCR (0xFFFB4114) // (PDC_MCI) Receive Next Counter Register -#define AT91C_MCI_TCR (0xFFFB410C) // (PDC_MCI) Transmit Counter Register -#define AT91C_MCI_RCR (0xFFFB4104) // (PDC_MCI) Receive Counter Register -// ========== Register definition for MCI peripheral ========== -#define AT91C_MCI_IDR (0xFFFB4048) // (MCI) MCI Interrupt Disable Register -#define AT91C_MCI_SR (0xFFFB4040) // (MCI) MCI Status Register -#define AT91C_MCI_RDR (0xFFFB4030) // (MCI) MCI Receive Data Register -#define AT91C_MCI_RSPR (0xFFFB4020) // (MCI) MCI Response Register -#define AT91C_MCI_ARGR (0xFFFB4010) // (MCI) MCI Argument Register -#define AT91C_MCI_DTOR (0xFFFB4008) // (MCI) MCI Data Timeout Register -#define AT91C_MCI_CR (0xFFFB4000) // (MCI) MCI Control Register -#define AT91C_MCI_IMR (0xFFFB404C) // (MCI) MCI Interrupt Mask Register -#define AT91C_MCI_IER (0xFFFB4044) // (MCI) MCI Interrupt Enable Register -#define AT91C_MCI_TDR (0xFFFB4034) // (MCI) MCI Transmit Data Register -#define AT91C_MCI_CMDR (0xFFFB4014) // (MCI) MCI Command Register -#define AT91C_MCI_SDCR (0xFFFB400C) // (MCI) MCI SD Card Register -#define AT91C_MCI_MR (0xFFFB4004) // (MCI) MCI Mode Register -// ========== Register definition for UDP peripheral ========== -#define AT91C_UDP_ISR (0xFFFB001C) // (UDP) Interrupt Status Register -#define AT91C_UDP_IDR (0xFFFB0014) // (UDP) Interrupt Disable Register -#define AT91C_UDP_GLBSTATE (0xFFFB0004) // (UDP) Global State Register -#define AT91C_UDP_FDR (0xFFFB0050) // (UDP) Endpoint FIFO Data Register -#define AT91C_UDP_CSR (0xFFFB0030) // (UDP) Endpoint Control and Status Register -#define AT91C_UDP_RSTEP (0xFFFB0028) // (UDP) Reset Endpoint Register -#define AT91C_UDP_ICR (0xFFFB0020) // (UDP) Interrupt Clear Register -#define AT91C_UDP_IMR (0xFFFB0018) // (UDP) Interrupt Mask Register -#define AT91C_UDP_IER (0xFFFB0010) // (UDP) Interrupt Enable Register -#define AT91C_UDP_FADDR (0xFFFB0008) // (UDP) Function Address Register -#define AT91C_UDP_NUM (0xFFFB0000) // (UDP) Frame Number Register -// ========== Register definition for TC5 peripheral ========== -#define AT91C_TC5_CMR (0xFFFA4084) // (TC5) Channel Mode Register -#define AT91C_TC5_IDR (0xFFFA40A8) // (TC5) Interrupt Disable Register -#define AT91C_TC5_SR (0xFFFA40A0) // (TC5) Status Register -#define AT91C_TC5_RB (0xFFFA4098) // (TC5) Register B -#define AT91C_TC5_CV (0xFFFA4090) // (TC5) Counter Value -#define AT91C_TC5_CCR (0xFFFA4080) // (TC5) Channel Control Register -#define AT91C_TC5_IMR (0xFFFA40AC) // (TC5) Interrupt Mask Register -#define AT91C_TC5_IER (0xFFFA40A4) // (TC5) Interrupt Enable Register -#define AT91C_TC5_RC (0xFFFA409C) // (TC5) Register C -#define AT91C_TC5_RA (0xFFFA4094) // (TC5) Register A -// ========== Register definition for TC4 peripheral ========== -#define AT91C_TC4_IMR (0xFFFA406C) // (TC4) Interrupt Mask Register -#define AT91C_TC4_IER (0xFFFA4064) // (TC4) Interrupt Enable Register -#define AT91C_TC4_RC (0xFFFA405C) // (TC4) Register C -#define AT91C_TC4_RA (0xFFFA4054) // (TC4) Register A -#define AT91C_TC4_CMR (0xFFFA4044) // (TC4) Channel Mode Register -#define AT91C_TC4_IDR (0xFFFA4068) // (TC4) Interrupt Disable Register -#define AT91C_TC4_SR (0xFFFA4060) // (TC4) Status Register -#define AT91C_TC4_RB (0xFFFA4058) // (TC4) Register B -#define AT91C_TC4_CV (0xFFFA4050) // (TC4) Counter Value -#define AT91C_TC4_CCR (0xFFFA4040) // (TC4) Channel Control Register -// ========== Register definition for TC3 peripheral ========== -#define AT91C_TC3_IMR (0xFFFA402C) // (TC3) Interrupt Mask Register -#define AT91C_TC3_CV (0xFFFA4010) // (TC3) Counter Value -#define AT91C_TC3_CCR (0xFFFA4000) // (TC3) Channel Control Register -#define AT91C_TC3_IER (0xFFFA4024) // (TC3) Interrupt Enable Register -#define AT91C_TC3_CMR (0xFFFA4004) // (TC3) Channel Mode Register -#define AT91C_TC3_RA (0xFFFA4014) // (TC3) Register A -#define AT91C_TC3_RC (0xFFFA401C) // (TC3) Register C -#define AT91C_TC3_IDR (0xFFFA4028) // (TC3) Interrupt Disable Register -#define AT91C_TC3_RB (0xFFFA4018) // (TC3) Register B -#define AT91C_TC3_SR (0xFFFA4020) // (TC3) Status Register -// ========== Register definition for TCB1 peripheral ========== -#define AT91C_TCB1_BCR (0xFFFA4140) // (TCB1) TC Block Control Register -#define AT91C_TCB1_BMR (0xFFFA4144) // (TCB1) TC Block Mode Register -// ========== Register definition for TC2 peripheral ========== -#define AT91C_TC2_IMR (0xFFFA00AC) // (TC2) Interrupt Mask Register -#define AT91C_TC2_IER (0xFFFA00A4) // (TC2) Interrupt Enable Register -#define AT91C_TC2_RC (0xFFFA009C) // (TC2) Register C -#define AT91C_TC2_RA (0xFFFA0094) // (TC2) Register A -#define AT91C_TC2_CMR (0xFFFA0084) // (TC2) Channel Mode Register -#define AT91C_TC2_IDR (0xFFFA00A8) // (TC2) Interrupt Disable Register -#define AT91C_TC2_SR (0xFFFA00A0) // (TC2) Status Register -#define AT91C_TC2_RB (0xFFFA0098) // (TC2) Register B -#define AT91C_TC2_CV (0xFFFA0090) // (TC2) Counter Value -#define AT91C_TC2_CCR (0xFFFA0080) // (TC2) Channel Control Register -// ========== Register definition for TC1 peripheral ========== -#define AT91C_TC1_IMR (0xFFFA006C) // (TC1) Interrupt Mask Register -#define AT91C_TC1_IER (0xFFFA0064) // (TC1) Interrupt Enable Register -#define AT91C_TC1_RC (0xFFFA005C) // (TC1) Register C -#define AT91C_TC1_RA (0xFFFA0054) // (TC1) Register A -#define AT91C_TC1_CMR (0xFFFA0044) // (TC1) Channel Mode Register -#define AT91C_TC1_IDR (0xFFFA0068) // (TC1) Interrupt Disable Register -#define AT91C_TC1_SR (0xFFFA0060) // (TC1) Status Register -#define AT91C_TC1_RB (0xFFFA0058) // (TC1) Register B -#define AT91C_TC1_CV (0xFFFA0050) // (TC1) Counter Value -#define AT91C_TC1_CCR (0xFFFA0040) // (TC1) Channel Control Register -// ========== Register definition for TC0 peripheral ========== -#define AT91C_TC0_IMR (0xFFFA002C) // (TC0) Interrupt Mask Register -#define AT91C_TC0_IER (0xFFFA0024) // (TC0) Interrupt Enable Register -#define AT91C_TC0_RC (0xFFFA001C) // (TC0) Register C -#define AT91C_TC0_RA (0xFFFA0014) // (TC0) Register A -#define AT91C_TC0_CMR (0xFFFA0004) // (TC0) Channel Mode Register -#define AT91C_TC0_IDR (0xFFFA0028) // (TC0) Interrupt Disable Register -#define AT91C_TC0_SR (0xFFFA0020) // (TC0) Status Register -#define AT91C_TC0_RB (0xFFFA0018) // (TC0) Register B -#define AT91C_TC0_CV (0xFFFA0010) // (TC0) Counter Value -#define AT91C_TC0_CCR (0xFFFA0000) // (TC0) Channel Control Register -// ========== Register definition for TCB0 peripheral ========== -#define AT91C_TCB0_BMR (0xFFFA00C4) // (TCB0) TC Block Mode Register -#define AT91C_TCB0_BCR (0xFFFA00C0) // (TCB0) TC Block Control Register -// ========== Register definition for UHP peripheral ========== -#define AT91C_UHP_HcRhDescriptorA (0x00300048) // (UHP) Root Hub characteristics A -#define AT91C_UHP_HcRhPortStatus (0x00300054) // (UHP) Root Hub Port Status Register -#define AT91C_UHP_HcRhDescriptorB (0x0030004C) // (UHP) Root Hub characteristics B -#define AT91C_UHP_HcControl (0x00300004) // (UHP) Operating modes for the Host Controller -#define AT91C_UHP_HcInterruptStatus (0x0030000C) // (UHP) Interrupt Status Register -#define AT91C_UHP_HcRhStatus (0x00300050) // (UHP) Root Hub Status register -#define AT91C_UHP_HcRevision (0x00300000) // (UHP) Revision -#define AT91C_UHP_HcCommandStatus (0x00300008) // (UHP) Command & status Register -#define AT91C_UHP_HcInterruptEnable (0x00300010) // (UHP) Interrupt Enable Register -#define AT91C_UHP_HcHCCA (0x00300018) // (UHP) Pointer to the Host Controller Communication Area -#define AT91C_UHP_HcControlHeadED (0x00300020) // (UHP) First Endpoint Descriptor of the Control list -#define AT91C_UHP_HcInterruptDisable (0x00300014) // (UHP) Interrupt Disable Register -#define AT91C_UHP_HcPeriodCurrentED (0x0030001C) // (UHP) Current Isochronous or Interrupt Endpoint Descriptor -#define AT91C_UHP_HcControlCurrentED (0x00300024) // (UHP) Endpoint Control and Status Register -#define AT91C_UHP_HcBulkCurrentED (0x0030002C) // (UHP) Current endpoint of the Bulk list -#define AT91C_UHP_HcFmInterval (0x00300034) // (UHP) Bit time between 2 consecutive SOFs -#define AT91C_UHP_HcBulkHeadED (0x00300028) // (UHP) First endpoint register of the Bulk list -#define AT91C_UHP_HcBulkDoneHead (0x00300030) // (UHP) Last completed transfer descriptor -#define AT91C_UHP_HcFmRemaining (0x00300038) // (UHP) Bit time remaining in the current Frame -#define AT91C_UHP_HcPeriodicStart (0x00300040) // (UHP) Periodic Start -#define AT91C_UHP_HcLSThreshold (0x00300044) // (UHP) LS Threshold -#define AT91C_UHP_HcFmNumber (0x0030003C) // (UHP) Frame number -// ========== Register definition for EMAC peripheral ========== -#define AT91C_EMAC_RSR (0xFFFBC020) // (EMAC) Receive Status Register -#define AT91C_EMAC_MAN (0xFFFBC034) // (EMAC) PHY Maintenance Register -#define AT91C_EMAC_HSH (0xFFFBC090) // (EMAC) Hash Address High[63:32] -#define AT91C_EMAC_MCOL (0xFFFBC048) // (EMAC) Multiple Collision Frame Register -#define AT91C_EMAC_IER (0xFFFBC028) // (EMAC) Interrupt Enable Register -#define AT91C_EMAC_SA2H (0xFFFBC0A4) // (EMAC) Specific Address 2 High, Last 2 bytes -#define AT91C_EMAC_HSL (0xFFFBC094) // (EMAC) Hash Address Low[31:0] -#define AT91C_EMAC_LCOL (0xFFFBC05C) // (EMAC) Late Collision Register -#define AT91C_EMAC_OK (0xFFFBC04C) // (EMAC) Frames Received OK Register -#define AT91C_EMAC_CFG (0xFFFBC004) // (EMAC) Network Configuration Register -#define AT91C_EMAC_SA3L (0xFFFBC0A8) // (EMAC) Specific Address 3 Low, First 4 bytes -#define AT91C_EMAC_SEQE (0xFFFBC050) // (EMAC) Frame Check Sequence Error Register -#define AT91C_EMAC_ECOL (0xFFFBC060) // (EMAC) Excessive Collision Register -#define AT91C_EMAC_ELR (0xFFFBC070) // (EMAC) Excessive Length Error Register -#define AT91C_EMAC_SR (0xFFFBC008) // (EMAC) Network Status Register -#define AT91C_EMAC_RBQP (0xFFFBC018) // (EMAC) Receive Buffer Queue Pointer -#define AT91C_EMAC_CSE (0xFFFBC064) // (EMAC) Carrier Sense Error Register -#define AT91C_EMAC_RJB (0xFFFBC074) // (EMAC) Receive Jabber Register -#define AT91C_EMAC_USF (0xFFFBC078) // (EMAC) Undersize Frame Register -#define AT91C_EMAC_IDR (0xFFFBC02C) // (EMAC) Interrupt Disable Register -#define AT91C_EMAC_SA1L (0xFFFBC098) // (EMAC) Specific Address 1 Low, First 4 bytes -#define AT91C_EMAC_IMR (0xFFFBC030) // (EMAC) Interrupt Mask Register -#define AT91C_EMAC_FRA (0xFFFBC040) // (EMAC) Frames Transmitted OK Register -#define AT91C_EMAC_SA3H (0xFFFBC0AC) // (EMAC) Specific Address 3 High, Last 2 bytes -#define AT91C_EMAC_SA1H (0xFFFBC09C) // (EMAC) Specific Address 1 High, Last 2 bytes -#define AT91C_EMAC_SCOL (0xFFFBC044) // (EMAC) Single Collision Frame Register -#define AT91C_EMAC_ALE (0xFFFBC054) // (EMAC) Alignment Error Register -#define AT91C_EMAC_TAR (0xFFFBC00C) // (EMAC) Transmit Address Register -#define AT91C_EMAC_SA4L (0xFFFBC0B0) // (EMAC) Specific Address 4 Low, First 4 bytes -#define AT91C_EMAC_SA2L (0xFFFBC0A0) // (EMAC) Specific Address 2 Low, First 4 bytes -#define AT91C_EMAC_TUE (0xFFFBC068) // (EMAC) Transmit Underrun Error Register -#define AT91C_EMAC_DTE (0xFFFBC058) // (EMAC) Deferred Transmission Frame Register -#define AT91C_EMAC_TCR (0xFFFBC010) // (EMAC) Transmit Control Register -#define AT91C_EMAC_CTL (0xFFFBC000) // (EMAC) Network Control Register -#define AT91C_EMAC_SA4H (0xFFFBC0B4) // (EMAC) Specific Address 4 High, Last 2 bytesr -#define AT91C_EMAC_CDE (0xFFFBC06C) // (EMAC) Code Error Register -#define AT91C_EMAC_SQEE (0xFFFBC07C) // (EMAC) SQE Test Error Register -#define AT91C_EMAC_TSR (0xFFFBC014) // (EMAC) Transmit Status Register -#define AT91C_EMAC_DRFC (0xFFFBC080) // (EMAC) Discarded RX Frame Register -// ========== Register definition for EBI peripheral ========== -#define AT91C_EBI_CFGR (0xFFFFFF64) // (EBI) Configuration Register -#define AT91C_EBI_CSA (0xFFFFFF60) // (EBI) Chip Select Assignment Register -// ========== Register definition for SMC2 peripheral ========== -#define AT91C_SMC2_CSR (0xFFFFFF70) // (SMC2) SMC2 Chip Select Register -// ========== Register definition for SDRC peripheral ========== -#define AT91C_SDRC_IMR (0xFFFFFFAC) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IER (0xFFFFFFA4) // (SDRC) SDRAM Controller Interrupt Enable Register -#define AT91C_SDRC_SRR (0xFFFFFF9C) // (SDRC) SDRAM Controller Self Refresh Register -#define AT91C_SDRC_TR (0xFFFFFF94) // (SDRC) SDRAM Controller Refresh Timer Register -#define AT91C_SDRC_ISR (0xFFFFFFB0) // (SDRC) SDRAM Controller Interrupt Mask Register -#define AT91C_SDRC_IDR (0xFFFFFFA8) // (SDRC) SDRAM Controller Interrupt Disable Register -#define AT91C_SDRC_LPR (0xFFFFFFA0) // (SDRC) SDRAM Controller Low Power Register -#define AT91C_SDRC_CR (0xFFFFFF98) // (SDRC) SDRAM Controller Configuration Register -#define AT91C_SDRC_MR (0xFFFFFF90) // (SDRC) SDRAM Controller Mode Register -// ========== Register definition for BFC peripheral ========== -#define AT91C_BFC_MR (0xFFFFFFC0) // (BFC) BFC Mode Register - -// ***************************************************************************** -// PIO DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_PIO_PA0 (1 << 0) // Pin Controlled by PA0 -#define AT91C_PA0_MISO (AT91C_PIO_PA0) // SPI Master In Slave -#define AT91C_PA0_PCK3 (AT91C_PIO_PA0) // PMC Programmable Clock Output 3 -#define AT91C_PIO_PA1 (1 << 1) // Pin Controlled by PA1 -#define AT91C_PA1_MOSI (AT91C_PIO_PA1) // SPI Master Out Slave -#define AT91C_PA1_PCK0 (AT91C_PIO_PA1) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PA10 (1 << 10) // Pin Controlled by PA10 -#define AT91C_PA10_ETX1 (AT91C_PIO_PA10) // Ethernet MAC Transmit Data 1 -#define AT91C_PA10_MCDB1 (AT91C_PIO_PA10) // Multimedia Card B Data 1 -#define AT91C_PIO_PA11 (1 << 11) // Pin Controlled by PA11 -#define AT91C_PA11_ECRS_ECRSDV (AT91C_PIO_PA11) // Ethernet MAC Carrier Sense/Carrier Sense and Data Valid -#define AT91C_PA11_MCDB2 (AT91C_PIO_PA11) // Multimedia Card B Data 2 -#define AT91C_PIO_PA12 (1 << 12) // Pin Controlled by PA12 -#define AT91C_PA12_ERX0 (AT91C_PIO_PA12) // Ethernet MAC Receive Data 0 -#define AT91C_PA12_MCDB3 (AT91C_PIO_PA12) // Multimedia Card B Data 3 -#define AT91C_PIO_PA13 (1 << 13) // Pin Controlled by PA13 -#define AT91C_PA13_ERX1 (AT91C_PIO_PA13) // Ethernet MAC Receive Data 1 -#define AT91C_PA13_TCLK0 (AT91C_PIO_PA13) // Timer Counter 0 external clock input -#define AT91C_PIO_PA14 (1 << 14) // Pin Controlled by PA14 -#define AT91C_PA14_ERXER (AT91C_PIO_PA14) // Ethernet MAC Receive Error -#define AT91C_PA14_TCLK1 (AT91C_PIO_PA14) // Timer Counter 1 external clock input -#define AT91C_PIO_PA15 (1 << 15) // Pin Controlled by PA15 -#define AT91C_PA15_EMDC (AT91C_PIO_PA15) // Ethernet MAC Management Data Clock -#define AT91C_PA15_TCLK2 (AT91C_PIO_PA15) // Timer Counter 2 external clock input -#define AT91C_PIO_PA16 (1 << 16) // Pin Controlled by PA16 -#define AT91C_PA16_EMDIO (AT91C_PIO_PA16) // Ethernet MAC Management Data Input/Output -#define AT91C_PA16_IRQ6 (AT91C_PIO_PA16) // AIC Interrupt input 6 -#define AT91C_PIO_PA17 (1 << 17) // Pin Controlled by PA17 -#define AT91C_PA17_TXD0 (AT91C_PIO_PA17) // USART 0 Transmit Data -#define AT91C_PA17_TIOA0 (AT91C_PIO_PA17) // Timer Counter 0 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA18 (1 << 18) // Pin Controlled by PA18 -#define AT91C_PA18_RXD0 (AT91C_PIO_PA18) // USART 0 Receive Data -#define AT91C_PA18_TIOB0 (AT91C_PIO_PA18) // Timer Counter 0 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA19 (1 << 19) // Pin Controlled by PA19 -#define AT91C_PA19_SCK0 (AT91C_PIO_PA19) // USART 0 Serial Clock -#define AT91C_PA19_TIOA1 (AT91C_PIO_PA19) // Timer Counter 1 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA2 (1 << 2) // Pin Controlled by PA2 -#define AT91C_PA2_SPCK (AT91C_PIO_PA2) // SPI Serial Clock -#define AT91C_PA2_IRQ4 (AT91C_PIO_PA2) // AIC Interrupt Input 4 -#define AT91C_PIO_PA20 (1 << 20) // Pin Controlled by PA20 -#define AT91C_PA20_CTS0 (AT91C_PIO_PA20) // USART 0 Clear To Send -#define AT91C_PA20_TIOB1 (AT91C_PIO_PA20) // Timer Counter 1 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA21 (1 << 21) // Pin Controlled by PA21 -#define AT91C_PA21_RTS0 (AT91C_PIO_PA21) // Usart 0 Ready To Send -#define AT91C_PA21_TIOA2 (AT91C_PIO_PA21) // Timer Counter 2 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PA22 (1 << 22) // Pin Controlled by PA22 -#define AT91C_PA22_RXD2 (AT91C_PIO_PA22) // USART 2 Receive Data -#define AT91C_PA22_TIOB2 (AT91C_PIO_PA22) // Timer Counter 2 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PA23 (1 << 23) // Pin Controlled by PA23 -#define AT91C_PA23_TXD2 (AT91C_PIO_PA23) // USART 2 Transmit Data -#define AT91C_PA23_IRQ3 (AT91C_PIO_PA23) // Interrupt input 3 -#define AT91C_PIO_PA24 (1 << 24) // Pin Controlled by PA24 -#define AT91C_PA24_SCK2 (AT91C_PIO_PA24) // USART2 Serial Clock -#define AT91C_PA24_PCK1 (AT91C_PIO_PA24) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA25 (1 << 25) // Pin Controlled by PA25 -#define AT91C_PA25_TWD (AT91C_PIO_PA25) // TWI Two-wire Serial Data -#define AT91C_PA25_IRQ2 (AT91C_PIO_PA25) // Interrupt input 2 -#define AT91C_PIO_PA26 (1 << 26) // Pin Controlled by PA26 -#define AT91C_PA26_TWCK (AT91C_PIO_PA26) // TWI Two-wire Serial Clock -#define AT91C_PA26_IRQ1 (AT91C_PIO_PA26) // Interrupt input 1 -#define AT91C_PIO_PA27 (1 << 27) // Pin Controlled by PA27 -#define AT91C_PA27_MCCK (AT91C_PIO_PA27) // Multimedia Card Clock -#define AT91C_PA27_TCLK3 (AT91C_PIO_PA27) // Timer Counter 3 External Clock Input -#define AT91C_PIO_PA28 (1 << 28) // Pin Controlled by PA28 -#define AT91C_PA28_MCCDA (AT91C_PIO_PA28) // Multimedia Card A Command -#define AT91C_PA28_TCLK4 (AT91C_PIO_PA28) // Timer Counter 4 external Clock Input -#define AT91C_PIO_PA29 (1 << 29) // Pin Controlled by PA29 -#define AT91C_PA29_MCDA0 (AT91C_PIO_PA29) // Multimedia Card A Data 0 -#define AT91C_PA29_TCLK5 (AT91C_PIO_PA29) // Timer Counter 5 external clock input -#define AT91C_PIO_PA3 (1 << 3) // Pin Controlled by PA3 -#define AT91C_PA3_NPCS0 (AT91C_PIO_PA3) // SPI Peripheral Chip Select 0 -#define AT91C_PA3_IRQ5 (AT91C_PIO_PA3) // AIC Interrupt Input 5 -#define AT91C_PIO_PA30 (1 << 30) // Pin Controlled by PA30 -#define AT91C_PA30_DRXD (AT91C_PIO_PA30) // DBGU Debug Receive Data -#define AT91C_PA30_CTS2 (AT91C_PIO_PA30) // Usart 2 Clear To Send -#define AT91C_PIO_PA31 (1 << 31) // Pin Controlled by PA31 -#define AT91C_PA31_DTXD (AT91C_PIO_PA31) // DBGU Debug Transmit Data -#define AT91C_PA31_RTS2 (AT91C_PIO_PA31) // USART 2 Ready To Send -#define AT91C_PIO_PA4 (1 << 4) // Pin Controlled by PA4 -#define AT91C_PA4_NPCS1 (AT91C_PIO_PA4) // SPI Peripheral Chip Select 1 -#define AT91C_PA4_PCK1 (AT91C_PIO_PA4) // PMC Programmable Clock Output 1 -#define AT91C_PIO_PA5 (1 << 5) // Pin Controlled by PA5 -#define AT91C_PA5_NPCS2 (AT91C_PIO_PA5) // SPI Peripheral Chip Select 2 -#define AT91C_PA5_TXD3 (AT91C_PIO_PA5) // USART 3 Transmit Data -#define AT91C_PIO_PA6 (1 << 6) // Pin Controlled by PA6 -#define AT91C_PA6_NPCS3 (AT91C_PIO_PA6) // SPI Peripheral Chip Select 3 -#define AT91C_PA6_RXD3 (AT91C_PIO_PA6) // USART 3 Receive Data -#define AT91C_PIO_PA7 (1 << 7) // Pin Controlled by PA7 -#define AT91C_PA7_ETXCK_EREFCK (AT91C_PIO_PA7) // Ethernet MAC Transmit Clock/Reference Clock -#define AT91C_PA7_PCK2 (AT91C_PIO_PA7) // PMC Programmable Clock 2 -#define AT91C_PIO_PA8 (1 << 8) // Pin Controlled by PA8 -#define AT91C_PA8_ETXEN (AT91C_PIO_PA8) // Ethernet MAC Transmit Enable -#define AT91C_PA8_MCCDB (AT91C_PIO_PA8) // Multimedia Card B Command -#define AT91C_PIO_PA9 (1 << 9) // Pin Controlled by PA9 -#define AT91C_PA9_ETX0 (AT91C_PIO_PA9) // Ethernet MAC Transmit Data 0 -#define AT91C_PA9_MCDB0 (AT91C_PIO_PA9) // Multimedia Card B Data 0 -#define AT91C_PIO_PB0 (1 << 0) // Pin Controlled by PB0 -#define AT91C_PB0_TF0 (AT91C_PIO_PB0) // SSC Transmit Frame Sync 0 -#define AT91C_PB0_TIOB3 (AT91C_PIO_PB0) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB1 (1 << 1) // Pin Controlled by PB1 -#define AT91C_PB1_TK0 (AT91C_PIO_PB1) // SSC Transmit Clock 0 -#define AT91C_PB1_CTS3 (AT91C_PIO_PB1) // USART 3 Clear To Send -#define AT91C_PIO_PB10 (1 << 10) // Pin Controlled by PB10 -#define AT91C_PB10_RK1 (AT91C_PIO_PB10) // SSC Receive Clock 1 -#define AT91C_PB10_TIOA5 (AT91C_PIO_PB10) // Timer Counter 5 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB11 (1 << 11) // Pin Controlled by PB11 -#define AT91C_PB11_RF1 (AT91C_PIO_PB11) // SSC Receive Frame Sync 1 -#define AT91C_PB11_TIOB5 (AT91C_PIO_PB11) // Timer Counter 5 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB12 (1 << 12) // Pin Controlled by PB12 -#define AT91C_PB12_TF2 (AT91C_PIO_PB12) // SSC Transmit Frame Sync 2 -#define AT91C_PB12_ETX2 (AT91C_PIO_PB12) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PB13 (1 << 13) // Pin Controlled by PB13 -#define AT91C_PB13_TK2 (AT91C_PIO_PB13) // SSC Transmit Clock 2 -#define AT91C_PB13_ETX3 (AT91C_PIO_PB13) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PB14 (1 << 14) // Pin Controlled by PB14 -#define AT91C_PB14_TD2 (AT91C_PIO_PB14) // SSC Transmit Data 2 -#define AT91C_PB14_ETXER (AT91C_PIO_PB14) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PB15 (1 << 15) // Pin Controlled by PB15 -#define AT91C_PB15_RD2 (AT91C_PIO_PB15) // SSC Receive Data 2 -#define AT91C_PB15_ERX2 (AT91C_PIO_PB15) // Ethernet MAC Receive Data 2 -#define AT91C_PIO_PB16 (1 << 16) // Pin Controlled by PB16 -#define AT91C_PB16_RK2 (AT91C_PIO_PB16) // SSC Receive Clock 2 -#define AT91C_PB16_ERX3 (AT91C_PIO_PB16) // Ethernet MAC Receive Data 3 -#define AT91C_PIO_PB17 (1 << 17) // Pin Controlled by PB17 -#define AT91C_PB17_RF2 (AT91C_PIO_PB17) // SSC Receive Frame Sync 2 -#define AT91C_PB17_ERXDV (AT91C_PIO_PB17) // Ethernet MAC Receive Data Valid -#define AT91C_PIO_PB18 (1 << 18) // Pin Controlled by PB18 -#define AT91C_PB18_RI1 (AT91C_PIO_PB18) // USART 1 Ring Indicator -#define AT91C_PB18_ECOL (AT91C_PIO_PB18) // Ethernet MAC Collision Detected -#define AT91C_PIO_PB19 (1 << 19) // Pin Controlled by PB19 -#define AT91C_PB19_DTR1 (AT91C_PIO_PB19) // USART 1 Data Terminal ready -#define AT91C_PB19_ERXCK (AT91C_PIO_PB19) // Ethernet MAC Receive Clock -#define AT91C_PIO_PB2 (1 << 2) // Pin Controlled by PB2 -#define AT91C_PB2_TD0 (AT91C_PIO_PB2) // SSC Transmit data -#define AT91C_PB2_SCK3 (AT91C_PIO_PB2) // USART 3 Serial Clock -#define AT91C_PIO_PB20 (1 << 20) // Pin Controlled by PB20 -#define AT91C_PB20_TXD1 (AT91C_PIO_PB20) // USART 1 Transmit Data -#define AT91C_PIO_PB21 (1 << 21) // Pin Controlled by PB21 -#define AT91C_PB21_RXD1 (AT91C_PIO_PB21) // USART 1 Receive Data -#define AT91C_PIO_PB22 (1 << 22) // Pin Controlled by PB22 -#define AT91C_PB22_SCK1 (AT91C_PIO_PB22) // USART1 Serial Clock -#define AT91C_PIO_PB23 (1 << 23) // Pin Controlled by PB23 -#define AT91C_PB23_DCD1 (AT91C_PIO_PB23) // USART 1 Data Carrier Detect -#define AT91C_PIO_PB24 (1 << 24) // Pin Controlled by PB24 -#define AT91C_PB24_CTS1 (AT91C_PIO_PB24) // USART 1 Clear To Send -#define AT91C_PIO_PB25 (1 << 25) // Pin Controlled by PB25 -#define AT91C_PB25_DSR1 (AT91C_PIO_PB25) // USART 1 Data Set ready -#define AT91C_PB25_EF100 (AT91C_PIO_PB25) // Ethernet MAC Force 100 Mbits/sec -#define AT91C_PIO_PB26 (1 << 26) // Pin Controlled by PB26 -#define AT91C_PB26_RTS1 (AT91C_PIO_PB26) // Usart 0 Ready To Send -#define AT91C_PIO_PB27 (1 << 27) // Pin Controlled by PB27 -#define AT91C_PB27_PCK0 (AT91C_PIO_PB27) // PMC Programmable Clock Output 0 -#define AT91C_PIO_PB28 (1 << 28) // Pin Controlled by PB28 -#define AT91C_PB28_FIQ (AT91C_PIO_PB28) // AIC Fast Interrupt Input -#define AT91C_PIO_PB29 (1 << 29) // Pin Controlled by PB29 -#define AT91C_PB29_IRQ0 (AT91C_PIO_PB29) // Interrupt input 0 -#define AT91C_PIO_PB3 (1 << 3) // Pin Controlled by PB3 -#define AT91C_PB3_RD0 (AT91C_PIO_PB3) // SSC Receive Data -#define AT91C_PB3_MCDA1 (AT91C_PIO_PB3) // Multimedia Card A Data 1 -#define AT91C_PIO_PB4 (1 << 4) // Pin Controlled by PB4 -#define AT91C_PB4_RK0 (AT91C_PIO_PB4) // SSC Receive Clock -#define AT91C_PB4_MCDA2 (AT91C_PIO_PB4) // Multimedia Card A Data 2 -#define AT91C_PIO_PB5 (1 << 5) // Pin Controlled by PB5 -#define AT91C_PB5_RF0 (AT91C_PIO_PB5) // SSC Receive Frame Sync 0 -#define AT91C_PB5_MCDA3 (AT91C_PIO_PB5) // Multimedia Card A Data 3 -#define AT91C_PIO_PB6 (1 << 6) // Pin Controlled by PB6 -#define AT91C_PB6_TF1 (AT91C_PIO_PB6) // SSC Transmit Frame Sync 1 -#define AT91C_PB6_TIOA3 (AT91C_PIO_PB6) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB7 (1 << 7) // Pin Controlled by PB7 -#define AT91C_PB7_TK1 (AT91C_PIO_PB7) // SSC Transmit Clock 1 -#define AT91C_PB7_TIOB3 (AT91C_PIO_PB7) // Timer Counter 3 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PB8 (1 << 8) // Pin Controlled by PB8 -#define AT91C_PB8_TD1 (AT91C_PIO_PB8) // SSC Transmit Data 1 -#define AT91C_PB8_TIOA4 (AT91C_PIO_PB8) // Timer Counter 4 Multipurpose Timer I/O Pin A -#define AT91C_PIO_PB9 (1 << 9) // Pin Controlled by PB9 -#define AT91C_PB9_RD1 (AT91C_PIO_PB9) // SSC Receive Data 1 -#define AT91C_PB9_TIOB4 (AT91C_PIO_PB9) // Timer Counter 4 Multipurpose Timer I/O Pin B -#define AT91C_PIO_PC0 (1 << 0) // Pin Controlled by PC0 -#define AT91C_PC0_BFCK (AT91C_PIO_PC0) // Burst Flash Clock -#define AT91C_PIO_PC1 (1 << 1) // Pin Controlled by PC1 -#define AT91C_PC1_BFRDY_SMOE (AT91C_PIO_PC1) // Burst Flash Ready -#define AT91C_PIO_PC10 (1 << 10) // Pin Controlled by PC10 -#define AT91C_PC10_NCS4_CFCS (AT91C_PIO_PC10) // Compact Flash Chip Select -#define AT91C_PIO_PC11 (1 << 11) // Pin Controlled by PC11 -#define AT91C_PC11_NCS5_CFCE1 (AT91C_PIO_PC11) // Chip Select 5 / Compact Flash Chip Enable 1 -#define AT91C_PIO_PC12 (1 << 12) // Pin Controlled by PC12 -#define AT91C_PC12_NCS6_CFCE2 (AT91C_PIO_PC12) // Chip Select 6 / Compact Flash Chip Enable 2 -#define AT91C_PIO_PC13 (1 << 13) // Pin Controlled by PC13 -#define AT91C_PC13_NCS7 (AT91C_PIO_PC13) // Chip Select 7 -#define AT91C_PIO_PC14 (1 << 14) // Pin Controlled by PC14 -#define AT91C_PIO_PC15 (1 << 15) // Pin Controlled by PC15 -#define AT91C_PIO_PC16 (1 << 16) // Pin Controlled by PC16 -#define AT91C_PC16_D16 (AT91C_PIO_PC16) // Data Bus [16] -#define AT91C_PIO_PC17 (1 << 17) // Pin Controlled by PC17 -#define AT91C_PC17_D17 (AT91C_PIO_PC17) // Data Bus [17] -#define AT91C_PIO_PC18 (1 << 18) // Pin Controlled by PC18 -#define AT91C_PC18_D18 (AT91C_PIO_PC18) // Data Bus [18] -#define AT91C_PIO_PC19 (1 << 19) // Pin Controlled by PC19 -#define AT91C_PC19_D19 (AT91C_PIO_PC19) // Data Bus [19] -#define AT91C_PIO_PC2 (1 << 2) // Pin Controlled by PC2 -#define AT91C_PC2_BFAVD (AT91C_PIO_PC2) // Burst Flash Address Valid -#define AT91C_PIO_PC20 (1 << 20) // Pin Controlled by PC20 -#define AT91C_PC20_D20 (AT91C_PIO_PC20) // Data Bus [20] -#define AT91C_PIO_PC21 (1 << 21) // Pin Controlled by PC21 -#define AT91C_PC21_D21 (AT91C_PIO_PC21) // Data Bus [21] -#define AT91C_PIO_PC22 (1 << 22) // Pin Controlled by PC22 -#define AT91C_PC22_D22 (AT91C_PIO_PC22) // Data Bus [22] -#define AT91C_PIO_PC23 (1 << 23) // Pin Controlled by PC23 -#define AT91C_PC23_D23 (AT91C_PIO_PC23) // Data Bus [23] -#define AT91C_PIO_PC24 (1 << 24) // Pin Controlled by PC24 -#define AT91C_PC24_D24 (AT91C_PIO_PC24) // Data Bus [24] -#define AT91C_PIO_PC25 (1 << 25) // Pin Controlled by PC25 -#define AT91C_PC25_D25 (AT91C_PIO_PC25) // Data Bus [25] -#define AT91C_PIO_PC26 (1 << 26) // Pin Controlled by PC26 -#define AT91C_PC26_D26 (AT91C_PIO_PC26) // Data Bus [26] -#define AT91C_PIO_PC27 (1 << 27) // Pin Controlled by PC27 -#define AT91C_PC27_D27 (AT91C_PIO_PC27) // Data Bus [27] -#define AT91C_PIO_PC28 (1 << 28) // Pin Controlled by PC28 -#define AT91C_PC28_D28 (AT91C_PIO_PC28) // Data Bus [28] -#define AT91C_PIO_PC29 (1 << 29) // Pin Controlled by PC29 -#define AT91C_PC29_D29 (AT91C_PIO_PC29) // Data Bus [29] -#define AT91C_PIO_PC3 (1 << 3) // Pin Controlled by PC3 -#define AT91C_PC3_BFBAA_SMWE (AT91C_PIO_PC3) // Burst Flash Address Advance / SmartMedia Write Enable -#define AT91C_PIO_PC30 (1 << 30) // Pin Controlled by PC30 -#define AT91C_PC30_D30 (AT91C_PIO_PC30) // Data Bus [30] -#define AT91C_PIO_PC31 (1 << 31) // Pin Controlled by PC31 -#define AT91C_PC31_D31 (AT91C_PIO_PC31) // Data Bus [31] -#define AT91C_PIO_PC4 (1 << 4) // Pin Controlled by PC4 -#define AT91C_PC4_BFOE (AT91C_PIO_PC4) // Burst Flash Output Enable -#define AT91C_PIO_PC5 (1 << 5) // Pin Controlled by PC5 -#define AT91C_PC5_BFWE (AT91C_PIO_PC5) // Burst Flash Write Enable -#define AT91C_PIO_PC6 (1 << 6) // Pin Controlled by PC6 -#define AT91C_PC6_NWAIT (AT91C_PIO_PC6) // NWAIT -#define AT91C_PIO_PC7 (1 << 7) // Pin Controlled by PC7 -#define AT91C_PC7_A23 (AT91C_PIO_PC7) // Address Bus[23] -#define AT91C_PIO_PC8 (1 << 8) // Pin Controlled by PC8 -#define AT91C_PC8_A24 (AT91C_PIO_PC8) // Address Bus[24] -#define AT91C_PIO_PC9 (1 << 9) // Pin Controlled by PC9 -#define AT91C_PC9_A25_CFRNW (AT91C_PIO_PC9) // Address Bus[25] / Compact Flash Read Not Write -#define AT91C_PIO_PD0 (1 << 0) // Pin Controlled by PD0 -#define AT91C_PD0_ETX0 (AT91C_PIO_PD0) // Ethernet MAC Transmit Data 0 -#define AT91C_PIO_PD1 (1 << 1) // Pin Controlled by PD1 -#define AT91C_PD1_ETX1 (AT91C_PIO_PD1) // Ethernet MAC Transmit Data 1 -#define AT91C_PIO_PD10 (1 << 10) // Pin Controlled by PD10 -#define AT91C_PD10_PCK3 (AT91C_PIO_PD10) // PMC Programmable Clock Output 3 -#define AT91C_PD10_TPS1 (AT91C_PIO_PD10) // ETM ARM9 pipeline status 1 -#define AT91C_PIO_PD11 (1 << 11) // Pin Controlled by PD11 -#define AT91C_PD11_ (AT91C_PIO_PD11) // -#define AT91C_PD11_TPS2 (AT91C_PIO_PD11) // ETM ARM9 pipeline status 2 -#define AT91C_PIO_PD12 (1 << 12) // Pin Controlled by PD12 -#define AT91C_PD12_ (AT91C_PIO_PD12) // -#define AT91C_PD12_TPK0 (AT91C_PIO_PD12) // ETM Trace Packet 0 -#define AT91C_PIO_PD13 (1 << 13) // Pin Controlled by PD13 -#define AT91C_PD13_ (AT91C_PIO_PD13) // -#define AT91C_PD13_TPK1 (AT91C_PIO_PD13) // ETM Trace Packet 1 -#define AT91C_PIO_PD14 (1 << 14) // Pin Controlled by PD14 -#define AT91C_PD14_ (AT91C_PIO_PD14) // -#define AT91C_PD14_TPK2 (AT91C_PIO_PD14) // ETM Trace Packet 2 -#define AT91C_PIO_PD15 (1 << 15) // Pin Controlled by PD15 -#define AT91C_PD15_TD0 (AT91C_PIO_PD15) // SSC Transmit data -#define AT91C_PD15_TPK3 (AT91C_PIO_PD15) // ETM Trace Packet 3 -#define AT91C_PIO_PD16 (1 << 16) // Pin Controlled by PD16 -#define AT91C_PD16_TD1 (AT91C_PIO_PD16) // SSC Transmit Data 1 -#define AT91C_PD16_TPK4 (AT91C_PIO_PD16) // ETM Trace Packet 4 -#define AT91C_PIO_PD17 (1 << 17) // Pin Controlled by PD17 -#define AT91C_PD17_TD2 (AT91C_PIO_PD17) // SSC Transmit Data 2 -#define AT91C_PD17_TPK5 (AT91C_PIO_PD17) // ETM Trace Packet 5 -#define AT91C_PIO_PD18 (1 << 18) // Pin Controlled by PD18 -#define AT91C_PD18_NPCS1 (AT91C_PIO_PD18) // SPI Peripheral Chip Select 1 -#define AT91C_PD18_TPK6 (AT91C_PIO_PD18) // ETM Trace Packet 6 -#define AT91C_PIO_PD19 (1 << 19) // Pin Controlled by PD19 -#define AT91C_PD19_NPCS2 (AT91C_PIO_PD19) // SPI Peripheral Chip Select 2 -#define AT91C_PD19_TPK7 (AT91C_PIO_PD19) // ETM Trace Packet 7 -#define AT91C_PIO_PD2 (1 << 2) // Pin Controlled by PD2 -#define AT91C_PD2_ETX2 (AT91C_PIO_PD2) // Ethernet MAC Transmit Data 2 -#define AT91C_PIO_PD20 (1 << 20) // Pin Controlled by PD20 -#define AT91C_PD20_NPCS3 (AT91C_PIO_PD20) // SPI Peripheral Chip Select 3 -#define AT91C_PD20_TPK8 (AT91C_PIO_PD20) // ETM Trace Packet 8 -#define AT91C_PIO_PD21 (1 << 21) // Pin Controlled by PD21 -#define AT91C_PD21_RTS0 (AT91C_PIO_PD21) // Usart 0 Ready To Send -#define AT91C_PD21_TPK9 (AT91C_PIO_PD21) // ETM Trace Packet 9 -#define AT91C_PIO_PD22 (1 << 22) // Pin Controlled by PD22 -#define AT91C_PD22_RTS1 (AT91C_PIO_PD22) // Usart 0 Ready To Send -#define AT91C_PD22_TPK10 (AT91C_PIO_PD22) // ETM Trace Packet 10 -#define AT91C_PIO_PD23 (1 << 23) // Pin Controlled by PD23 -#define AT91C_PD23_RTS2 (AT91C_PIO_PD23) // USART 2 Ready To Send -#define AT91C_PD23_TPK11 (AT91C_PIO_PD23) // ETM Trace Packet 11 -#define AT91C_PIO_PD24 (1 << 24) // Pin Controlled by PD24 -#define AT91C_PD24_RTS3 (AT91C_PIO_PD24) // USART 3 Ready To Send -#define AT91C_PD24_TPK12 (AT91C_PIO_PD24) // ETM Trace Packet 12 -#define AT91C_PIO_PD25 (1 << 25) // Pin Controlled by PD25 -#define AT91C_PD25_DTR1 (AT91C_PIO_PD25) // USART 1 Data Terminal ready -#define AT91C_PD25_TPK13 (AT91C_PIO_PD25) // ETM Trace Packet 13 -#define AT91C_PIO_PD26 (1 << 26) // Pin Controlled by PD26 -#define AT91C_PD26_TPK14 (AT91C_PIO_PD26) // ETM Trace Packet 14 -#define AT91C_PIO_PD27 (1 << 27) // Pin Controlled by PD27 -#define AT91C_PD27_TPK15 (AT91C_PIO_PD27) // ETM Trace Packet 15 -#define AT91C_PIO_PD3 (1 << 3) // Pin Controlled by PD3 -#define AT91C_PD3_ETX3 (AT91C_PIO_PD3) // Ethernet MAC Transmit Data 3 -#define AT91C_PIO_PD4 (1 << 4) // Pin Controlled by PD4 -#define AT91C_PD4_ETXEN (AT91C_PIO_PD4) // Ethernet MAC Transmit Enable -#define AT91C_PIO_PD5 (1 << 5) // Pin Controlled by PD5 -#define AT91C_PD5_ETXER (AT91C_PIO_PD5) // Ethernet MAC Transmikt Coding Error -#define AT91C_PIO_PD6 (1 << 6) // Pin Controlled by PD6 -#define AT91C_PD6_DTXD (AT91C_PIO_PD6) // DBGU Debug Transmit Data -#define AT91C_PIO_PD7 (1 << 7) // Pin Controlled by PD7 -#define AT91C_PD7_PCK0 (AT91C_PIO_PD7) // PMC Programmable Clock Output 0 -#define AT91C_PD7_TSYNC (AT91C_PIO_PD7) // ETM Synchronization signal -#define AT91C_PIO_PD8 (1 << 8) // Pin Controlled by PD8 -#define AT91C_PD8_PCK1 (AT91C_PIO_PD8) // PMC Programmable Clock Output 1 -#define AT91C_PD8_TCLK (AT91C_PIO_PD8) // ETM Trace Clock signal -#define AT91C_PIO_PD9 (1 << 9) // Pin Controlled by PD9 -#define AT91C_PD9_PCK2 (AT91C_PIO_PD9) // PMC Programmable Clock 2 -#define AT91C_PD9_TPS0 (AT91C_PIO_PD9) // ETM ARM9 pipeline status 0 - -// ***************************************************************************** -// PERIPHERAL ID DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ID_FIQ ( 0) // Advanced Interrupt Controller (FIQ) -#define AT91C_ID_SYS ( 1) // System Peripheral -#define AT91C_ID_PIOA ( 2) // Parallel IO Controller A -#define AT91C_ID_PIOB ( 3) // Parallel IO Controller B -#define AT91C_ID_PIOC ( 4) // Parallel IO Controller C -#define AT91C_ID_PIOD ( 5) // Parallel IO Controller D -#define AT91C_ID_US0 ( 6) // USART 0 -#define AT91C_ID_US1 ( 7) // USART 1 -#define AT91C_ID_US2 ( 8) // USART 2 -#define AT91C_ID_US3 ( 9) // USART 3 -#define AT91C_ID_MCI (10) // Multimedia Card Interface -#define AT91C_ID_UDP (11) // USB Device Port -#define AT91C_ID_TWI (12) // Two-Wire Interface -#define AT91C_ID_SPI (13) // Serial Peripheral Interface -#define AT91C_ID_SSC0 (14) // Serial Synchronous Controller 0 -#define AT91C_ID_SSC1 (15) // Serial Synchronous Controller 1 -#define AT91C_ID_SSC2 (16) // Serial Synchronous Controller 2 -#define AT91C_ID_TC0 (17) // Timer Counter 0 -#define AT91C_ID_TC1 (18) // Timer Counter 1 -#define AT91C_ID_TC2 (19) // Timer Counter 2 -#define AT91C_ID_TC3 (20) // Timer Counter 3 -#define AT91C_ID_TC4 (21) // Timer Counter 4 -#define AT91C_ID_TC5 (22) // Timer Counter 5 -#define AT91C_ID_UHP (23) // USB Host port -#define AT91C_ID_EMAC (24) // Ethernet MAC -#define AT91C_ID_IRQ0 (25) // Advanced Interrupt Controller (IRQ0) -#define AT91C_ID_IRQ1 (26) // Advanced Interrupt Controller (IRQ1) -#define AT91C_ID_IRQ2 (27) // Advanced Interrupt Controller (IRQ2) -#define AT91C_ID_IRQ3 (28) // Advanced Interrupt Controller (IRQ3) -#define AT91C_ID_IRQ4 (29) // Advanced Interrupt Controller (IRQ4) -#define AT91C_ID_IRQ5 (30) // Advanced Interrupt Controller (IRQ5) -#define AT91C_ID_IRQ6 (31) // Advanced Interrupt Controller (IRQ6) - -// ***************************************************************************** -// BASE ADDRESS DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_BASE_SYS (0xFFFFF000) // (SYS) Base Address -#define AT91C_BASE_MC (0xFFFFFF00) // (MC) Base Address -#define AT91C_BASE_RTC (0xFFFFFE00) // (RTC) Base Address -#define AT91C_BASE_ST (0xFFFFFD00) // (ST) Base Address -#define AT91C_BASE_PMC (0xFFFFFC00) // (PMC) Base Address -#define AT91C_BASE_CKGR (0xFFFFFC20) // (CKGR) Base Address -#define AT91C_BASE_PIOD (0xFFFFFA00) // (PIOD) Base Address -#define AT91C_BASE_PIOC (0xFFFFF800) // (PIOC) Base Address -#define AT91C_BASE_PIOB (0xFFFFF600) // (PIOB) Base Address -#define AT91C_BASE_PIOA (0xFFFFF400) // (PIOA) Base Address -#define AT91C_BASE_DBGU (0xFFFFF200) // (DBGU) Base Address -#define AT91C_BASE_PDC_DBGU (0xFFFFF300) // (PDC_DBGU) Base Address -#define AT91C_BASE_AIC (0xFFFFF000) // (AIC) Base Address -#define AT91C_BASE_PDC_SPI (0xFFFE0100) // (PDC_SPI) Base Address -#define AT91C_BASE_SPI (0xFFFE0000) // (SPI) Base Address -#define AT91C_BASE_PDC_SSC2 (0xFFFD8100) // (PDC_SSC2) Base Address -#define AT91C_BASE_SSC2 (0xFFFD8000) // (SSC2) Base Address -#define AT91C_BASE_PDC_SSC1 (0xFFFD4100) // (PDC_SSC1) Base Address -#define AT91C_BASE_SSC1 (0xFFFD4000) // (SSC1) Base Address -#define AT91C_BASE_PDC_SSC0 (0xFFFD0100) // (PDC_SSC0) Base Address -#define AT91C_BASE_SSC0 (0xFFFD0000) // (SSC0) Base Address -#define AT91C_BASE_PDC_US3 (0xFFFCC100) // (PDC_US3) Base Address -#define AT91C_BASE_US3 (0xFFFCC000) // (US3) Base Address -#define AT91C_BASE_PDC_US2 (0xFFFC8100) // (PDC_US2) Base Address -#define AT91C_BASE_US2 (0xFFFC8000) // (US2) Base Address -#define AT91C_BASE_PDC_US1 (0xFFFC4100) // (PDC_US1) Base Address -#define AT91C_BASE_US1 (0xFFFC4000) // (US1) Base Address -#define AT91C_BASE_PDC_US0 (0xFFFC0100) // (PDC_US0) Base Address -#define AT91C_BASE_US0 (0xFFFC0000) // (US0) Base Address -#define AT91C_BASE_TWI (0xFFFB8000) // (TWI) Base Address -#define AT91C_BASE_PDC_MCI (0xFFFB4100) // (PDC_MCI) Base Address -#define AT91C_BASE_MCI (0xFFFB4000) // (MCI) Base Address -#define AT91C_BASE_UDP (0xFFFB0000) // (UDP) Base Address -#define AT91C_BASE_TC5 (0xFFFA4080) // (TC5) Base Address -#define AT91C_BASE_TC4 (0xFFFA4040) // (TC4) Base Address -#define AT91C_BASE_TC3 (0xFFFA4000) // (TC3) Base Address -#define AT91C_BASE_TCB1 (0xFFFA4080) // (TCB1) Base Address -#define AT91C_BASE_TC2 (0xFFFA0080) // (TC2) Base Address -#define AT91C_BASE_TC1 (0xFFFA0040) // (TC1) Base Address -#define AT91C_BASE_TC0 (0xFFFA0000) // (TC0) Base Address -#define AT91C_BASE_TCB0 (0xFFFA0000) // (TCB0) Base Address -#define AT91C_BASE_UHP (0x00300000) // (UHP) Base Address -#define AT91C_BASE_EMAC (0xFFFBC000) // (EMAC) Base Address -#define AT91C_BASE_EBI (0xFFFFFF60) // (EBI) Base Address -#define AT91C_BASE_SMC2 (0xFFFFFF70) // (SMC2) Base Address -#define AT91C_BASE_SDRC (0xFFFFFF90) // (SDRC) Base Address -#define AT91C_BASE_BFC (0xFFFFFFC0) // (BFC) Base Address - -// ***************************************************************************** -// MEMORY MAPPING DEFINITIONS FOR AT91RM9200 -// ***************************************************************************** -#define AT91C_ISRAM (0x00200000) // Internal SRAM base address -#define AT91C_ISRAM_SIZE (0x00004000) // Internal SRAM size in byte (16 Kbyte) -#define AT91C_IROM (0x00100000) // Internal ROM base address -#define AT91C_IROM_SIZE (0x00020000) // Internal ROM size in byte (128 Kbyte) - - diff --git a/target/linux/at91-2.6/image/dfboot/src/include/led.h b/target/linux/at91-2.6/image/dfboot/src/include/led.h deleted file mode 100644 index 9bebd9c3cb..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/include/led.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB - * Ulf Samuelsson - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - - #ifndef __LED_H -#define __LED_H - -#ifndef __ASSEMBLY__ -extern void LED_init (void); -extern void LED_set(unsigned int led); -extern void red_LED_on(void); -extern void red_LED_off(void); -extern void green_LED_on(void); -extern void green_LED_off(void); -extern void yellow_LED_on(void); -extern void yellow_LED_off(void); -extern void LED_blink(unsigned int led); -#else - .extern LED_init - .extern LED_set - .extern LED_blink - .extern red_LED_on - .extern red_LED_off - .extern yellow_LED_on - .extern yellow_LED_off - .extern green_LED_on - .extern green_LED_off -#endif -#endif diff --git a/target/linux/at91-2.6/image/dfboot/src/include/lib_AT91RM9200.h b/target/linux/at91-2.6/image/dfboot/src/include/lib_AT91RM9200.h deleted file mode 100644 index c322b32a49..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/include/lib_AT91RM9200.h +++ /dev/null @@ -1,2978 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : lib_AT91RM9200.h -//* Object : AT91RM9200 inlined functions -//* Generated : AT91 SW Application Group 11/19/2003 (17:20:51) -//* -//* CVS Reference : /lib_pdc.h/1.2/Tue Jul 02 12:29:40 2002// -//* CVS Reference : /lib_dbgu.h/1.1/Fri Jan 31 12:18:40 2003// -//* CVS Reference : /lib_rtc_1245d.h/1.1/Fri Jan 31 12:19:12 2003// -//* CVS Reference : /lib_ssc.h/1.4/Fri Jan 31 12:19:20 2003// -//* CVS Reference : /lib_spi_AT91RMxxxx.h/1.2/Fri Jan 31 12:19:31 2003// -//* CVS Reference : /lib_tc_1753b.h/1.1/Fri Jan 31 12:20:02 2003// -//* CVS Reference : /lib_pmc.h/1.3/Thu Nov 14 07:40:45 2002// -//* CVS Reference : /lib_pio.h/1.3/Fri Jan 31 12:18:56 2003// -//* CVS Reference : /lib_twi.h/1.2/Fri Jan 31 12:19:38 2003// -//* CVS Reference : /lib_usart.h/1.5/Thu Nov 21 16:01:53 2002// -//* CVS Reference : /lib_mci.h/1.2/Wed Nov 20 14:18:55 2002// -//* CVS Reference : /lib_aic.h/1.3/Fri Jul 12 07:46:11 2002// -//* CVS Reference : /lib_udp.h/1.3/Fri Jan 31 12:19:48 2003// -//* CVS Reference : /lib_st.h/1.4/Fri Jan 31 12:20:13 2003// -//*---------------------------------------------------------------------------- - -#ifndef lib_AT91RM9200_H -#define lib_AT91RM9200_H - -/* ***************************************************************************** - SOFTWARE API FOR PDC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetNextRx -//* \brief Set the next receive transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetNextRx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be received - unsigned int bytes) // \arg number of bytes to be received -{ - pPDC->PDC_RNPR = (unsigned int) address; - pPDC->PDC_RNCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetNextTx -//* \brief Set the next transmit transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetNextTx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be transmitted - unsigned int bytes) // \arg number of bytes to be transmitted -{ - pPDC->PDC_TNPR = (unsigned int) address; - pPDC->PDC_TNCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetRx -//* \brief Set the receive transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetRx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be received - unsigned int bytes) // \arg number of bytes to be received -{ - pPDC->PDC_RPR = (unsigned int) address; - pPDC->PDC_RCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SetTx -//* \brief Set the transmit transfer descriptor -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_SetTx ( - AT91PS_PDC pPDC, // \arg pointer to a PDC controller - char *address, // \arg address to the next bloc to be transmitted - unsigned int bytes) // \arg number of bytes to be transmitted -{ - pPDC->PDC_TPR = (unsigned int) address; - pPDC->PDC_TCR = bytes; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_EnableTx -//* \brief Enable transmit -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_EnableTx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_TXTEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_EnableRx -//* \brief Enable receive -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_EnableRx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_RXTEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_DisableTx -//* \brief Disable transmit -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_DisableTx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_TXTDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_DisableRx -//* \brief Disable receive -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_DisableRx ( - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - pPDC->PDC_PTCR = AT91C_PDC_RXTDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsTxEmpty -//* \brief Test if the current transfer descriptor has been sent -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsTxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_TCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsNextTxEmpty -//* \brief Test if the next transfer descriptor has been moved to the current td -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsNextTxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_TNCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsRxEmpty -//* \brief Test if the current transfer descriptor has been filled -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsRxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_RCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_IsNextRxEmpty -//* \brief Test if the next transfer descriptor has been moved to the current td -//*---------------------------------------------------------------------------- -static inline int AT91F_PDC_IsNextRxEmpty ( // \return return 1 if transfer is complete - AT91PS_PDC pPDC ) // \arg pointer to a PDC controller -{ - return !(pPDC->PDC_RNCR); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_Open -//* \brief Open PDC: disable TX and RX reset transfer descriptors, re-enable RX and TX -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_Open ( - AT91PS_PDC pPDC) // \arg pointer to a PDC controller -{ - //* Disable the RX and TX PDC transfer requests - AT91F_PDC_DisableRx(pPDC); - AT91F_PDC_DisableTx(pPDC); - - //* Reset all Counter register Next buffer first - AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0); - AT91F_PDC_SetTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetRx(pPDC, (char *) 0, 0); - - //* Enable the RX and TX PDC transfer requests - AT91F_PDC_EnableRx(pPDC); - AT91F_PDC_EnableTx(pPDC); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_Close -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -static inline void AT91F_PDC_Close ( - AT91PS_PDC pPDC) // \arg pointer to a PDC controller -{ - //* Disable the RX and TX PDC transfer requests - AT91F_PDC_DisableRx(pPDC); - AT91F_PDC_DisableTx(pPDC); - - //* Reset all Counter register Next buffer first - AT91F_PDC_SetNextTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetNextRx(pPDC, (char *) 0, 0); - AT91F_PDC_SetTx(pPDC, (char *) 0, 0); - AT91F_PDC_SetRx(pPDC, (char *) 0, 0); - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_SendFrame -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PDC_SendFrame( - AT91PS_PDC pPDC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - if (AT91F_PDC_IsTxEmpty(pPDC)) { - //* Buffer and next buffer can be initialized - AT91F_PDC_SetTx(pPDC, pBuffer, szBuffer); - AT91F_PDC_SetNextTx(pPDC, pNextBuffer, szNextBuffer); - return 2; - } - else if (AT91F_PDC_IsNextTxEmpty(pPDC)) { - //* Only one buffer can be initialized - AT91F_PDC_SetNextTx(pPDC, pBuffer, szBuffer); - return 1; - } - else { - //* All buffer are in use... - return 0; - } -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PDC_ReceiveFrame -//* \brief Close PDC: disable TX and RX reset transfer descriptors -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PDC_ReceiveFrame ( - AT91PS_PDC pPDC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - if (AT91F_PDC_IsRxEmpty(pPDC)) { - //* Buffer and next buffer can be initialized - AT91F_PDC_SetRx(pPDC, pBuffer, szBuffer); - AT91F_PDC_SetNextRx(pPDC, pNextBuffer, szNextBuffer); - return 2; - } - else if (AT91F_PDC_IsNextRxEmpty(pPDC)) { - //* Only one buffer can be initialized - AT91F_PDC_SetNextRx(pPDC, pBuffer, szBuffer); - return 1; - } - else { - //* All buffer are in use... - return 0; - } -} -/* ***************************************************************************** - SOFTWARE API FOR DBGU - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_InterruptEnable -//* \brief Enable DBGU Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_InterruptEnable( - AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller - unsigned int flag) // \arg dbgu interrupt to be enabled -{ - pDbgu->DBGU_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_InterruptDisable -//* \brief Disable DBGU Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_InterruptDisable( - AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller - unsigned int flag) // \arg dbgu interrupt to be disabled -{ - pDbgu->DBGU_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_GetInterruptMaskStatus -//* \brief Return DBGU Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_DBGU_GetInterruptMaskStatus( // \return DBGU Interrupt Mask Status - AT91PS_DBGU pDbgu) // \arg pointer to a DBGU controller -{ - return pDbgu->DBGU_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_IsInterruptMasked -//* \brief Test if DBGU Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_DBGU_IsInterruptMasked( - AT91PS_DBGU pDbgu, // \arg pointer to a DBGU controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_DBGU_GetInterruptMaskStatus(pDbgu) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR RTC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_InterruptEnable -//* \brief Enable RTC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_RTC_InterruptEnable( - AT91PS_RTC pRtc, // \arg pointer to a RTC controller - unsigned int flag) // \arg RTC interrupt to be enabled -{ - pRtc->RTC_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_InterruptDisable -//* \brief Disable RTC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_RTC_InterruptDisable( - AT91PS_RTC pRtc, // \arg pointer to a RTC controller - unsigned int flag) // \arg RTC interrupt to be disabled -{ - pRtc->RTC_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_GetInterruptMaskStatus -//* \brief Return RTC Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_RTC_GetInterruptMaskStatus( // \return RTC Interrupt Mask Status - AT91PS_RTC pRtc) // \arg pointer to a RTC controller -{ - return pRtc->RTC_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_IsInterruptMasked -//* \brief Test if RTC Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_RTC_IsInterruptMasked( - AT91PS_RTC pRtc, // \arg pointer to a RTC controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_RTC_GetInterruptMaskStatus(pRtc) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR SSC - ***************************************************************************** */ -//* Define the standard I2S mode configuration - -//* Configuration to set in the SSC Transmit Clock Mode Register -//* Parameters : nb_bit_by_slot : 8, 16 or 32 bits -//* nb_slot_by_frame : number of channels -#define AT91C_I2S_ASY_MASTER_TX_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ - AT91C_SSC_CKS_DIV +\ - AT91C_SSC_CKO_CONTINOUS +\ - AT91C_SSC_CKG_NONE +\ - AT91C_SSC_START_FALL_RF +\ - AT91C_SSC_STTOUT +\ - ((1<<16) & AT91C_SSC_STTDLY) +\ - ((((nb_bit_by_slot*nb_slot_by_frame)/2)-1) <<24)) - - -//* Configuration to set in the SSC Transmit Frame Mode Register -//* Parameters : nb_bit_by_slot : 8, 16 or 32 bits -//* nb_slot_by_frame : number of channels -#define AT91C_I2S_ASY_TX_FRAME_SETTING(nb_bit_by_slot, nb_slot_by_frame)( +\ - (nb_bit_by_slot-1) +\ - AT91C_SSC_MSBF +\ - (((nb_slot_by_frame-1)<<8) & AT91C_SSC_DATNB) +\ - (((nb_bit_by_slot-1)<<16) & AT91C_SSC_FSLEN) +\ - AT91C_SSC_FSOS_NEGATIVE) - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_SetBaudrate -//* \brief Set the baudrate according to the CPU clock -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_SetBaudrate ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int mainClock, // \arg peripheral clock - unsigned int speed) // \arg SSC baudrate -{ - unsigned int baud_value; - //* Define the baud rate divisor register - if (speed == 0) - baud_value = 0; - else - { - baud_value = (unsigned int) (mainClock * 10)/(2*speed); - if ((baud_value % 10) >= 5) - baud_value = (baud_value / 10) + 1; - else - baud_value /= 10; - } - - pSSC->SSC_CMR = baud_value; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_Configure -//* \brief Configure SSC -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_Configure ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int syst_clock, // \arg System Clock Frequency - unsigned int baud_rate, // \arg Expected Baud Rate Frequency - unsigned int clock_rx, // \arg Receiver Clock Parameters - unsigned int mode_rx, // \arg mode Register to be programmed - unsigned int clock_tx, // \arg Transmitter Clock Parameters - unsigned int mode_tx) // \arg mode Register to be programmed -{ - //* Disable interrupts - pSSC->SSC_IDR = (unsigned int) -1; - - //* Reset receiver and transmitter - pSSC->SSC_CR = AT91C_SSC_SWRST | AT91C_SSC_RXDIS | AT91C_SSC_TXDIS ; - - //* Define the Clock Mode Register - AT91F_SSC_SetBaudrate(pSSC, syst_clock, baud_rate); - - //* Write the Receive Clock Mode Register - pSSC->SSC_RCMR = clock_rx; - - //* Write the Transmit Clock Mode Register - pSSC->SSC_TCMR = clock_tx; - - //* Write the Receive Frame Mode Register - pSSC->SSC_RFMR = mode_rx; - - //* Write the Transmit Frame Mode Register - pSSC->SSC_TFMR = mode_tx; - - //* Clear Transmit and Receive Counters - AT91F_PDC_Open((AT91PS_PDC) &(pSSC->SSC_RPR)); - - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_EnableRx -//* \brief Enable receiving datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_EnableRx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Enable receiver - pSSC->SSC_CR = AT91C_SSC_RXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_DisableRx -//* \brief Disable receiving datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_DisableRx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Disable receiver - pSSC->SSC_CR = AT91C_SSC_RXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_EnableTx -//* \brief Enable sending datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_EnableTx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Enable transmitter - pSSC->SSC_CR = AT91C_SSC_TXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_DisableTx -//* \brief Disable sending datas -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_DisableTx ( - AT91PS_SSC pSSC) // \arg pointer to a SSC controller -{ - //* Disable transmitter - pSSC->SSC_CR = AT91C_SSC_TXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_EnableIt -//* \brief Enable SSC IT -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_EnableIt ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pSSC->SSC_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_DisableIt -//* \brief Disable SSC IT -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC_DisableIt ( - AT91PS_SSC pSSC, // \arg pointer to a SSC controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pSSC->SSC_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_ReceiveFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SSC_ReceiveFrame ( - AT91PS_SSC pSSC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_ReceiveFrame( - (AT91PS_PDC) &(pSSC->SSC_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_SendFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initialized with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SSC_SendFrame( - AT91PS_SSC pSSC, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_SendFrame( - (AT91PS_PDC) &(pSSC->SSC_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_GetInterruptMaskStatus -//* \brief Return SSC Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SSC_GetInterruptMaskStatus( // \return SSC Interrupt Mask Status - AT91PS_SSC pSsc) // \arg pointer to a SSC controller -{ - return pSsc->SSC_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC_IsInterruptMasked -//* \brief Test if SSC Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_SSC_IsInterruptMasked( - AT91PS_SSC pSsc, // \arg pointer to a SSC controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_SSC_GetInterruptMaskStatus(pSsc) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR SPI - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Open -//* \brief Open a SPI Port -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_Open ( - const unsigned int null) // \arg -{ - /* NOT DEFINED AT THIS MOMENT */ - return ( 0 ); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgCs -//* \brief Configure SPI chip select register -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgCs ( - int cs, // SPI cs number (0 to 3) - int val) // chip select register -{ - //* Write to the CSR register - *(AT91C_SPI_CSR + cs) = val; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_EnableIt -//* \brief Enable SPI interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_EnableIt ( - AT91PS_SPI pSPI, // pointer to a SPI controller - unsigned int flag) // IT to be enabled -{ - //* Write to the IER register - pSPI->SPI_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_DisableIt -//* \brief Disable SPI interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_DisableIt ( - AT91PS_SPI pSPI, // pointer to a SPI controller - unsigned int flag) // IT to be disabled -{ - //* Write to the IDR register - pSPI->SPI_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Reset -//* \brief Reset the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Reset ( - AT91PS_SPI pSPI // pointer to a SPI controller - ) -{ - //* Write to the CR register - pSPI->SPI_CR = AT91C_SPI_SWRST; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Enable -//* \brief Enable the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Enable ( - AT91PS_SPI pSPI // pointer to a SPI controller - ) -{ - //* Write to the CR register - pSPI->SPI_CR = AT91C_SPI_SPIEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Disable -//* \brief Disable the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Disable ( - AT91PS_SPI pSPI // pointer to a SPI controller - ) -{ - //* Write to the CR register - pSPI->SPI_CR = AT91C_SPI_SPIDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgMode -//* \brief Enable the SPI controller -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgMode ( - AT91PS_SPI pSPI, // pointer to a SPI controller - int mode) // mode register -{ - //* Write to the MR register - pSPI->SPI_MR = mode; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgPCS -//* \brief Switch to the correct PCS of SPI Mode Register : Fixed Peripheral Selected -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgPCS ( - AT91PS_SPI pSPI, // pointer to a SPI controller - char PCS_Device) // PCS of the Device -{ - //* Write to the MR register - pSPI->SPI_MR &= 0xFFF0FFFF; - pSPI->SPI_MR |= ( (PCS_Device<<16) & AT91C_SPI_PCS ); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_ReceiveFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_ReceiveFrame ( - AT91PS_SPI pSPI, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_ReceiveFrame( - (AT91PS_PDC) &(pSPI->SPI_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_SendFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is bSPIy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_SendFrame( - AT91PS_SPI pSPI, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_SendFrame( - (AT91PS_PDC) &(pSPI->SPI_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_Close -//* \brief Close SPI: disable IT disable transfert, close PDC -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_Close ( - AT91PS_SPI pSPI) // \arg pointer to a SPI controller -{ - //* Reset all the Chip Select register - pSPI->SPI_CSR[0] = 0 ; - pSPI->SPI_CSR[1] = 0 ; - pSPI->SPI_CSR[2] = 0 ; - pSPI->SPI_CSR[3] = 0 ; - - //* Reset the SPI mode - pSPI->SPI_MR = 0 ; - - //* Disable all interrupts - pSPI->SPI_IDR = 0xFFFFFFFF ; - - //* Abort the Peripheral Data Transfers - AT91F_PDC_Close((AT91PS_PDC) &(pSPI->SPI_RPR)); - - //* Disable receiver and transmitter and stop any activity immediately - pSPI->SPI_CR = AT91C_SPI_SPIDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_PutChar -//* \brief Send a character,does not check if ready to send -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_PutChar ( - AT91PS_SPI pSPI, - unsigned int character, - unsigned int cs_number ) -{ - unsigned int value_for_cs; - value_for_cs = (~(1 << cs_number)) & 0xF; //Place a zero among a 4 ONEs number - pSPI->SPI_TDR = (character & 0xFFFF) | (value_for_cs << 16); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_GetChar -//* \brief Receive a character,does not check if a character is available -//*---------------------------------------------------------------------------- -static inline int AT91F_SPI_GetChar ( - const AT91PS_SPI pSPI) -{ - return((pSPI->SPI_RDR) & 0xFFFF); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_GetInterruptMaskStatus -//* \brief Return SPI Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_SPI_GetInterruptMaskStatus( // \return SPI Interrupt Mask Status - AT91PS_SPI pSpi) // \arg pointer to a SPI controller -{ - return pSpi->SPI_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_IsInterruptMasked -//* \brief Test if SPI Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_SPI_IsInterruptMasked( - AT91PS_SPI pSpi, // \arg pointer to a SPI controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_SPI_GetInterruptMaskStatus(pSpi) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR TC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_InterruptEnable -//* \brief Enable TC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_TC_InterruptEnable( - AT91PS_TC pTc, // \arg pointer to a TC controller - unsigned int flag) // \arg TC interrupt to be enabled -{ - pTc->TC_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_InterruptDisable -//* \brief Disable TC Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_TC_InterruptDisable( - AT91PS_TC pTc, // \arg pointer to a TC controller - unsigned int flag) // \arg TC interrupt to be disabled -{ - pTc->TC_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_GetInterruptMaskStatus -//* \brief Return TC Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_TC_GetInterruptMaskStatus( // \return TC Interrupt Mask Status - AT91PS_TC pTc) // \arg pointer to a TC controller -{ - return pTc->TC_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC_IsInterruptMasked -//* \brief Test if TC Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_TC_IsInterruptMasked( - AT91PS_TC pTc, // \arg pointer to a TC controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_TC_GetInterruptMaskStatus(pTc) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR PMC - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_CKGR_GetMainClock -//* \brief Return Main clock in Hz -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_CKGR_GetMainClock ( - AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller - unsigned int slowClock) // \arg slowClock in Hz -{ - return ((pCKGR->CKGR_MCFR & AT91C_CKGR_MAINF) * slowClock) >> 4; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_GetProcessorClock -//* \brief Return processor clock in Hz (for AT91RM3400 and AT91RM9200) -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PMC_GetProcessorClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller - unsigned int slowClock) // \arg slowClock in Hz -{ - unsigned int reg = pPMC->PMC_MCKR; - unsigned int prescaler = (1 << ((reg & AT91C_PMC_PRES) >> 2)); - unsigned int pllDivider, pllMultiplier; - - switch (reg & AT91C_PMC_CSS) { - case AT91C_PMC_CSS_SLOW_CLK: // Slow clock selected - return slowClock / prescaler; - case AT91C_PMC_CSS_MAIN_CLK: // Main clock is selected - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / prescaler; - case AT91C_PMC_CSS_PLLA_CLK: // PLLA clock is selected - reg = pCKGR->CKGR_PLLAR; - pllDivider = (reg & AT91C_CKGR_DIVA); - pllMultiplier = ((reg & AT91C_CKGR_MULA) >> 16) + 1; - if (reg & AT91C_CKGR_SRCA) // Source is Main clock - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler; - else // Source is Slow clock - return slowClock / pllDivider * pllMultiplier / prescaler; - case AT91C_PMC_CSS_PLLB_CLK: // PLLB clock is selected - reg = pCKGR->CKGR_PLLBR; - pllDivider = (reg & AT91C_CKGR_DIVB); - pllMultiplier = ((reg & AT91C_CKGR_MULB) >> 16) + 1; - return AT91F_CKGR_GetMainClock(pCKGR, slowClock) / pllDivider * pllMultiplier / prescaler; - } - return 0; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_GetMasterClock -//* \brief Return master clock in Hz (just for AT91RM9200) -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PMC_GetMasterClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - AT91PS_CKGR pCKGR, // \arg pointer to CKGR controller - unsigned int slowClock) // \arg slowClock in Hz -{ - return AT91F_PMC_GetProcessorClock(pPMC, pCKGR, slowClock) / - (((pPMC->PMC_MCKR & AT91C_PMC_MDIV) >> 8)+1); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_EnablePeriphClock -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_EnablePeriphClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int periphIds) // \arg IDs of peripherals to enable -{ - pPMC->PMC_PCER = periphIds; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_DisablePeriphClock -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_DisablePeriphClock ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int periphIds) // \arg IDs of peripherals to enable -{ - pPMC->PMC_PCDR = periphIds; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_EnablePCK -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_EnablePCK ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int pck, // \arg Peripheral clock identifier 0 .. 7 - unsigned int ccs, // \arg clock selection: AT91C_PMC_CSS_SLOW_CLK, AT91C_PMC_CSS_MAIN_CLK, AT91C_PMC_CSS_PLLA_CLK, AT91C_PMC_CSS_PLLB_CLK - unsigned int pres) // \arg Programmable clock prescalar AT91C_PMC_PRES_CLK, AT91C_PMC_PRES_CLK_2, ..., AT91C_PMC_PRES_CLK_64 -{ - pPMC->PMC_PCKR[pck] = ccs | pres; - pPMC->PMC_SCER = (1 << pck) << 8; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_DisablePCK -//* \brief Enable peripheral clock -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_DisablePCK ( - AT91PS_PMC pPMC, // \arg pointer to PMC controller - unsigned int pck) // \arg Peripheral clock identifier 0 .. 7 -{ - pPMC->PMC_SCDR = (1 << pck) << 8; -} - -/* ***************************************************************************** - SOFTWARE API FOR PIO - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgPeriph -//* \brief Enable pins to be drived by peripheral -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgPeriph( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int periphAEnable, // \arg PERIPH A to enable - unsigned int periphBEnable) // \arg PERIPH B to enable - -{ - pPio->PIO_ASR = periphAEnable; - pPio->PIO_BSR = periphBEnable; - pPio->PIO_PDR = (periphAEnable | periphBEnable); // Set in Periph mode -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgOutput -//* \brief Enable PIO in output mode -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int pioEnable) // \arg PIO to be enabled -{ - pPio->PIO_PER = pioEnable; // Set in PIO mode - pPio->PIO_OER = pioEnable; // Configure in Output -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgInput -//* \brief Enable PIO in input mode -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgInput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int inputEnable) // \arg PIO to be enabled -{ - // Disable output - pPio->PIO_ODR = inputEnable; - pPio->PIO_PER = inputEnable; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgOpendrain -//* \brief Configure PIO in open drain -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgOpendrain( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int multiDrvEnable) // \arg pio to be configured in open drain -{ - // Configure the multi-drive option - pPio->PIO_MDDR = ~multiDrvEnable; - pPio->PIO_MDER = multiDrvEnable; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgPullup -//* \brief Enable pullup on PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgPullup( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int pullupEnable) // \arg enable pullup on PIO -{ - // Connect or not Pullup - pPio->PIO_PPUDR = ~pullupEnable; - pPio->PIO_PPUER = pullupEnable; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgDirectDrive -//* \brief Enable direct drive on PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgDirectDrive( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int directDrive) // \arg PIO to be configured with direct drive - -{ - // Configure the Direct Drive - pPio->PIO_OWDR = ~directDrive; - pPio->PIO_OWER = directDrive; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_CfgInputFilter -//* \brief Enable input filter on input PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_CfgInputFilter( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int inputFilter) // \arg PIO to be configured with input filter - -{ - // Configure the Direct Drive - pPio->PIO_IFDR = ~inputFilter; - pPio->PIO_IFER = inputFilter; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInput -//* \brief Return PIO input value -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInput( // \return PIO input - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_PDSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInputSet -//* \brief Test if PIO is input flag is active -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInputSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInput(pPio) & flag); -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_SetOutput -//* \brief Set to 1 output PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_SetOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg output to be set -{ - pPio->PIO_SODR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_ClearOutput -//* \brief Set to 0 output PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_ClearOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg output to be cleared -{ - pPio->PIO_CODR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_ForceOutput -//* \brief Force output when Direct drive option is enabled -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_ForceOutput( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg output to be forced -{ - pPio->PIO_ODSR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_Enable -//* \brief Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_Enable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be enabled -{ - pPio->PIO_PER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_Disable -//* \brief Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_Disable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be disabled -{ - pPio->PIO_PDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetStatus -//* \brief Return PIO Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetStatus( // \return PIO Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_PSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsSet -//* \brief Test if PIO is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputEnable -//* \brief Output Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output to be enabled -{ - pPio->PIO_OER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputDisable -//* \brief Output Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output to be disabled -{ - pPio->PIO_ODR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetOutputStatus -//* \brief Return PIO Output Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetOutputStatus( // \return PIO Output Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_OSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsOuputSet -//* \brief Test if PIO Output is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsOutputSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetOutputStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InputFilterEnable -//* \brief Input Filter Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InputFilterEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio input filter to be enabled -{ - pPio->PIO_IFER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InputFilterDisable -//* \brief Input Filter Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InputFilterDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio input filter to be disabled -{ - pPio->PIO_IFDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInputFilterStatus -//* \brief Return PIO Input Filter Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInputFilterStatus( // \return PIO Input Filter Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_IFSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInputFilterSet -//* \brief Test if PIO Input filter is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInputFilterSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInputFilterStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetOutputDataStatus -//* \brief Return PIO Output Data Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetOutputDataStatus( // \return PIO Output Data Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_ODSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InterruptEnable -//* \brief Enable PIO Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InterruptEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio interrupt to be enabled -{ - pPio->PIO_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_InterruptDisable -//* \brief Disable PIO Interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_InterruptDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio interrupt to be disabled -{ - pPio->PIO_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInterruptMaskStatus -//* \brief Return PIO Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInterruptMaskStatus( // \return PIO Interrupt Mask Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetInterruptStatus -//* \brief Return PIO Interrupt Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetInterruptStatus( // \return PIO Interrupt Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_ISR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInterruptMasked -//* \brief Test if PIO Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInterruptMasked( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInterruptMaskStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsInterruptSet -//* \brief Test if PIO Interrupt is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsInterruptSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetInterruptStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_MultiDriverEnable -//* \brief Multi Driver Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_MultiDriverEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be enabled -{ - pPio->PIO_MDER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_MultiDriverDisable -//* \brief Multi Driver Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_MultiDriverDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio to be disabled -{ - pPio->PIO_MDDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetMultiDriverStatus -//* \brief Return PIO Multi Driver Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetMultiDriverStatus( // \return PIO Multi Driver Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_MDSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsMultiDriverSet -//* \brief Test if PIO MultiDriver is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsMultiDriverSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetMultiDriverStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_A_RegisterSelection -//* \brief PIO A Register Selection -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_A_RegisterSelection( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio A register selection -{ - pPio->PIO_ASR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_B_RegisterSelection -//* \brief PIO B Register Selection -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_B_RegisterSelection( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio B register selection -{ - pPio->PIO_BSR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_Get_AB_RegisterStatus -//* \brief Return PIO Interrupt Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_Get_AB_RegisterStatus( // \return PIO AB Register Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_ABSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsAB_RegisterSet -//* \brief Test if PIO AB Register is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsAB_RegisterSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_Get_AB_RegisterStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputWriteEnable -//* \brief Output Write Enable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputWriteEnable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output write to be enabled -{ - pPio->PIO_OWER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_OutputWriteDisable -//* \brief Output Write Disable PIO -//*---------------------------------------------------------------------------- -static inline void AT91F_PIO_OutputWriteDisable( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg pio output write to be disabled -{ - pPio->PIO_OWDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetOutputWriteStatus -//* \brief Return PIO Output Write Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetOutputWriteStatus( // \return PIO Output Write Status - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_OWSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsOutputWriteSet -//* \brief Test if PIO OutputWrite is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsOutputWriteSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetOutputWriteStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_GetCfgPullup -//* \brief Return PIO Configuration Pullup -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_PIO_GetCfgPullup( // \return PIO Configuration Pullup - AT91PS_PIO pPio) // \arg pointer to a PIO controller -{ - return pPio->PIO_PPUSR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsOutputDataStatusSet -//* \brief Test if PIO Output Data Status is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsOutputDataStatusSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_PIO_GetOutputDataStatus(pPio) & flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIO_IsCfgPullupStatusSet -//* \brief Test if PIO Configuration Pullup Status is Set -//*---------------------------------------------------------------------------- -static inline int AT91F_PIO_IsCfgPullupStatusSet( - AT91PS_PIO pPio, // \arg pointer to a PIO controller - unsigned int flag) // \arg flag to be tested -{ - return (~AT91F_PIO_GetCfgPullup(pPio) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR TWI - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_EnableIt -//* \brief Enable TWI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_EnableIt ( - AT91PS_TWI pTWI, // \arg pointer to a TWI controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pTWI->TWI_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_DisableIt -//* \brief Disable TWI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_DisableIt ( - AT91PS_TWI pTWI, // \arg pointer to a TWI controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pTWI->TWI_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_Configure -//* \brief Configure TWI in master mode -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_Configure ( AT91PS_TWI pTWI ) // \arg pointer to a TWI controller -{ - //* Disable interrupts - pTWI->TWI_IDR = (unsigned int) -1; - - //* Reset peripheral - pTWI->TWI_CR = AT91C_TWI_SWRST; - - //* Set Master mode - pTWI->TWI_CR = AT91C_TWI_MSEN | AT91C_TWI_SVDIS; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_GetInterruptMaskStatus -//* \brief Return TWI Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_TWI_GetInterruptMaskStatus( // \return TWI Interrupt Mask Status - AT91PS_TWI pTwi) // \arg pointer to a TWI controller -{ - return pTwi->TWI_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_IsInterruptMasked -//* \brief Test if TWI Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_TWI_IsInterruptMasked( - AT91PS_TWI pTwi, // \arg pointer to a TWI controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_TWI_GetInterruptMaskStatus(pTwi) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR USART - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Baudrate -//* \brief Calculate the baudrate -//* Standard Asynchronous Mode : 8 bits , 1 stop , no parity -#define AT91C_US_ASYNC_MODE ( AT91C_US_USMODE_NORMAL + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_CLOCK ) - -//* Standard External Asynchronous Mode : 8 bits , 1 stop , no parity -#define AT91C_US_ASYNC_SCK_MODE ( AT91C_US_USMODE_NORMAL + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_EXT ) - -//* Standard Synchronous Mode : 8 bits , 1 stop , no parity -#define AT91C_US_SYNC_MODE ( AT91C_US_SYNC + \ - AT91C_US_USMODE_NORMAL + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_CLOCK ) - -//* SCK used Label -#define AT91C_US_SCK_USED (AT91C_US_CKLO | AT91C_US_CLKS_EXT) - -//* Standard ISO T=0 Mode : 8 bits , 1 stop , parity -#define AT91C_US_ISO_READER_MODE ( AT91C_US_USMODE_ISO7816_0 + \ - AT91C_US_CLKS_CLOCK +\ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_EVEN + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CKLO +\ - AT91C_US_OVER) - -//* Standard IRDA mode -#define AT91C_US_ASYNC_IRDA_MODE ( AT91C_US_USMODE_IRDA + \ - AT91C_US_NBSTOP_1_BIT + \ - AT91C_US_PAR_NONE + \ - AT91C_US_CHRL_8_BITS + \ - AT91C_US_CLKS_CLOCK ) - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Baudrate -//* \brief Caluculate baud_value according to the main clock and the baud rate -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_Baudrate ( - const unsigned int main_clock, // \arg peripheral clock - const unsigned int baud_rate) // \arg UART baudrate -{ - unsigned int baud_value = ((main_clock*10)/(baud_rate * 16)); - if ((baud_value % 10) >= 5) - baud_value = (baud_value / 10) + 1; - else - baud_value /= 10; - return baud_value; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SetBaudrate -//* \brief Set the baudrate according to the CPU clock -//*---------------------------------------------------------------------------- -static inline void AT91F_US_SetBaudrate ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int mainClock, // \arg peripheral clock - unsigned int speed) // \arg UART baudrate -{ - //* Define the baud rate divisor register - pUSART->US_BRGR = AT91F_US_Baudrate(mainClock, speed); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SetTimeguard -//* \brief Set USART timeguard -//*---------------------------------------------------------------------------- -static inline void AT91F_US_SetTimeguard ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int timeguard) // \arg timeguard value -{ - //* Write the Timeguard Register - pUSART->US_TTGR = timeguard ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_EnableIt -//* \brief Enable USART IT -//*---------------------------------------------------------------------------- -static inline void AT91F_US_EnableIt ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pUSART->US_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_DisableIt -//* \brief Disable USART IT -//*---------------------------------------------------------------------------- -static inline void AT91F_US_DisableIt ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IER register - pUSART->US_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Configure -//* \brief Configure USART -//*---------------------------------------------------------------------------- -static inline void AT91F_US_Configure ( - AT91PS_USART pUSART, // \arg pointer to a USART controller - unsigned int mainClock, // \arg peripheral clock - unsigned int mode , // \arg mode Register to be programmed - unsigned int baudRate , // \arg baudrate to be programmed - unsigned int timeguard ) // \arg timeguard to be programmed -{ - //* Disable interrupts - pUSART->US_IDR = (unsigned int) -1; - - //* Reset receiver and transmitter - pUSART->US_CR = AT91C_US_RSTRX | AT91C_US_RSTTX | AT91C_US_RXDIS | AT91C_US_TXDIS ; - - //* Define the baud rate divisor register - AT91F_US_SetBaudrate(pUSART, mainClock, baudRate); - - //* Write the Timeguard Register - AT91F_US_SetTimeguard(pUSART, timeguard); - - //* Clear Transmit and Receive Counters - AT91F_PDC_Open((AT91PS_PDC) &(pUSART->US_RPR)); - - //* Define the USART mode - pUSART->US_MR = mode ; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_EnableRx -//* \brief Enable receiving characters -//*---------------------------------------------------------------------------- -static inline void AT91F_US_EnableRx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Enable receiver - pUSART->US_CR = AT91C_US_RXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_EnableTx -//* \brief Enable sending characters -//*---------------------------------------------------------------------------- -static inline void AT91F_US_EnableTx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Enable transmitter - pUSART->US_CR = AT91C_US_TXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_ResetRx -//* \brief Reset Receiver and re-enable it -//*---------------------------------------------------------------------------- -static inline void AT91F_US_ResetRx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Reset receiver - pUSART->US_CR = AT91C_US_RSTRX; - //* Re-Enable receiver - pUSART->US_CR = AT91C_US_RXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_ResetTx -//* \brief Reset Transmitter and re-enable it -//*---------------------------------------------------------------------------- -static inline void AT91F_US_ResetTx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Reset transmitter - pUSART->US_CR = AT91C_US_RSTTX; - //* Enable transmitter - pUSART->US_CR = AT91C_US_TXEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_DisableRx -//* \brief Disable Receiver -//*---------------------------------------------------------------------------- -static inline void AT91F_US_DisableRx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Disable receiver - pUSART->US_CR = AT91C_US_RXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_DisableTx -//* \brief Disable Transmitter -//*---------------------------------------------------------------------------- -static inline void AT91F_US_DisableTx ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Disable transmitter - pUSART->US_CR = AT91C_US_TXDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Close -//* \brief Close USART: disable IT disable receiver and transmitter, close PDC -//*---------------------------------------------------------------------------- -static inline void AT91F_US_Close ( - AT91PS_USART pUSART) // \arg pointer to a USART controller -{ - //* Reset the baud rate divisor register - pUSART->US_BRGR = 0 ; - - //* Reset the USART mode - pUSART->US_MR = 0 ; - - //* Reset the Timeguard Register - pUSART->US_TTGR = 0; - - //* Disable all interrupts - pUSART->US_IDR = 0xFFFFFFFF ; - - //* Abort the Peripheral Data Transfers - AT91F_PDC_Close((AT91PS_PDC) &(pUSART->US_RPR)); - - //* Disable receiver and transmitter and stop any activity immediately - pUSART->US_CR = AT91C_US_TXDIS | AT91C_US_RXDIS | AT91C_US_RSTTX | AT91C_US_RSTRX ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_TxReady -//* \brief Return 1 if a character can be written in US_THR -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_TxReady ( - AT91PS_USART pUSART ) // \arg pointer to a USART controller -{ - return (pUSART->US_CSR & AT91C_US_TXRDY); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_RxReady -//* \brief Return 1 if a character can be read in US_RHR -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_RxReady ( - AT91PS_USART pUSART ) // \arg pointer to a USART controller -{ - return (pUSART->US_CSR & AT91C_US_RXRDY); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_Error -//* \brief Return the error flag -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_Error ( - AT91PS_USART pUSART ) // \arg pointer to a USART controller -{ - return (pUSART->US_CSR & - (AT91C_US_OVRE | // Overrun error - AT91C_US_FRAME | // Framing error - AT91C_US_PARE)); // Parity error -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_PutChar -//* \brief Send a character,does not check if ready to send -//*---------------------------------------------------------------------------- -static inline void AT91F_US_PutChar ( - AT91PS_USART pUSART, - int character ) -{ - pUSART->US_THR = (character & 0x1FF); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_GetChar -//* \brief Receive a character,does not check if a character is available -//*---------------------------------------------------------------------------- -static inline int AT91F_US_GetChar ( - const AT91PS_USART pUSART) -{ - return((pUSART->US_RHR) & 0x1FF); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SendFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_SendFrame( - AT91PS_USART pUSART, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_SendFrame( - (AT91PS_PDC) &(pUSART->US_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_ReceiveFrame -//* \brief Return 2 if PDC has been initialized with Buffer and Next Buffer, 1 if PDC has been initializaed with Next Buffer, 0 if PDC is busy -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_US_ReceiveFrame ( - AT91PS_USART pUSART, - char *pBuffer, - unsigned int szBuffer, - char *pNextBuffer, - unsigned int szNextBuffer ) -{ - return AT91F_PDC_ReceiveFrame( - (AT91PS_PDC) &(pUSART->US_RPR), - pBuffer, - szBuffer, - pNextBuffer, - szNextBuffer); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US_SetIrdaFilter -//* \brief Set the value of IrDa filter tregister -//*---------------------------------------------------------------------------- -static inline void AT91F_US_SetIrdaFilter ( - AT91PS_USART pUSART, - unsigned char value -) -{ - pUSART->US_IF = value; -} - -/* ***************************************************************************** - SOFTWARE API FOR MCI - ***************************************************************************** */ -//* Classic MCI Mode Register Configuration with PDC mode enabled and MCK = MCI Clock -#define AT91C_MCI_MR_PDCMODE (AT91C_MCI_CLKDIV |\ - AT91C_MCI_PWSDIV |\ - (AT91C_MCI_PWSDIV<<1) |\ - AT91C_MCI_PDCMODE) - -//* Classic MCI Data Timeout Register Configuration with 1048576 MCK cycles between 2 data transfer -#define AT91C_MCI_DTOR_1MEGA_CYCLES (AT91C_MCI_DTOCYC | AT91C_MCI_DTOMUL) - -//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot A -#define AT91C_MCI_MMC_SLOTA (AT91C_MCI_SCDSEL & 0x0) - -//* Classic MCI SDCard Register Configuration with 1-bit data bus on slot B -#define AT91C_MCI_MMC_SLOTB (AT91C_MCI_SCDSEL) - -//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot A -#define AT91C_MCI_SDCARD_4BITS_SLOTA ( (AT91C_MCI_SCDSEL & 0x0) | AT91C_MCI_SCDBUS ) - -//* Classic MCI SDCard Register Configuration with 4-bit data bus on slot B -#define AT91C_MCI_SDCARD_4BITS_SLOTB (AT91C_MCI_SCDSEL | AT91C_MCI_SCDBUS) - - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Configure -//* \brief Configure the MCI -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Configure ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int DTOR_register, // \arg Data Timeout Register to be programmed - unsigned int MR_register, // \arg Mode Register to be programmed - unsigned int SDCR_register) // \arg SDCard Register to be programmed -{ - //* Reset the MCI - pMCI->MCI_CR = AT91C_MCI_MCIEN | AT91C_MCI_PWSEN; - - //* Disable all the interrupts - pMCI->MCI_IDR = 0xFFFFFFFF; - - //* Set the Data Timeout Register - pMCI->MCI_DTOR = DTOR_register; - - //* Set the Mode Register - pMCI->MCI_MR = MR_register; - - //* Set the SDCard Register - pMCI->MCI_SDCR = SDCR_register; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_EnableIt -//* \brief Enable MCI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_EnableIt ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pMCI->MCI_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_DisableIt -//* \brief Disable MCI IT -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_DisableIt ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pMCI->MCI_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Enable_Interface -//* \brief Enable the MCI Interface -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Enable_Interface ( - AT91PS_MCI pMCI) // \arg pointer to a MCI controller -{ - //* Enable the MCI - pMCI->MCI_CR = AT91C_MCI_MCIEN; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Disable_Interface -//* \brief Disable the MCI Interface -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Disable_Interface ( - AT91PS_MCI pMCI) // \arg pointer to a MCI controller -{ - //* Disable the MCI - pMCI->MCI_CR = AT91C_MCI_MCIDIS; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Cfg_ModeRegister -//* \brief Configure the MCI Mode Register -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_Cfg_ModeRegister ( - AT91PS_MCI pMCI, // \arg pointer to a MCI controller - unsigned int mode_register) // \arg value to set in the mode register -{ - //* Configure the MCI MR - pMCI->MCI_MR = mode_register; -} -/* ***************************************************************************** - SOFTWARE API FOR AIC - ***************************************************************************** */ -#define AT91C_AIC_BRANCH_OPCODE ((void (*) ()) 0xE51FFF20) // ldr, pc, [pc, #-&F20] - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_ConfigureIt -//* \brief Interrupt Handler Initialization -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_ConfigureIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id, // \arg interrupt number to initialize - unsigned int priority, // \arg priority to give to the interrupt - unsigned int src_type, // \arg activation and sense of activation - void (*newHandler) (void) ) // \arg address of the interrupt handler -{ - unsigned int oldHandler; - unsigned int mask ; - - oldHandler = pAic->AIC_SVR[irq_id]; - - mask = 0x1 << irq_id ; - //* Disable the interrupt on the interrupt controller - pAic->AIC_IDCR = mask ; - //* Save the interrupt handler routine pointer and the interrupt priority - pAic->AIC_SVR[irq_id] = (unsigned int) newHandler ; - //* Store the Source Mode Register - pAic->AIC_SMR[irq_id] = src_type | priority ; - //* Clear the interrupt on the interrupt controller - pAic->AIC_ICCR = mask ; - - return oldHandler; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_EnableIt -//* \brief Enable corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_EnableIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id ) // \arg interrupt number to initialize -{ - //* Enable the interrupt on the interrupt controller - pAic->AIC_IECR = 0x1 << irq_id ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_DisableIt -//* \brief Disable corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_DisableIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id ) // \arg interrupt number to initialize -{ - unsigned int mask = 0x1 << irq_id; - //* Disable the interrupt on the interrupt controller - pAic->AIC_IDCR = mask ; - //* Clear the interrupt on the Interrupt Controller ( if one is pending ) - pAic->AIC_ICCR = mask ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_ClearIt -//* \brief Clear corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_ClearIt ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg interrupt number to initialize -{ - //* Clear the interrupt on the Interrupt Controller ( if one is pending ) - pAic->AIC_ICCR = (0x1 << irq_id); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_AcknowledgeIt -//* \brief Acknowledge corresponding IT number -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_AcknowledgeIt ( - AT91PS_AIC pAic) // \arg pointer to the AIC registers -{ - pAic->AIC_EOICR = pAic->AIC_EOICR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_SetExceptionVector -//* \brief Configure vector handler -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_SetExceptionVector ( - unsigned int *pVector, // \arg pointer to the AIC registers - void (*Handler) () ) // \arg Interrupt Handler -{ - unsigned int oldVector = *pVector; - - if ((unsigned int) Handler == (unsigned int) AT91C_AIC_BRANCH_OPCODE) - *pVector = (unsigned int) AT91C_AIC_BRANCH_OPCODE; - else - *pVector = (((((unsigned int) Handler) - ((unsigned int) pVector) - 0x8) >> 2) & 0x00FFFFFF) | 0xEA000000; - - return oldVector; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_Trig -//* \brief Trig an IT -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_Trig ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg interrupt number -{ - pAic->AIC_ISCR = (0x1 << irq_id) ; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_IsActive -//* \brief Test if an IT is active -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_IsActive ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg Interrupt Number -{ - return (pAic->AIC_ISR & (0x1 << irq_id)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_IsPending -//* \brief Test if an IT is pending -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_AIC_IsPending ( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - unsigned int irq_id) // \arg Interrupt Number -{ - return (pAic->AIC_IPR & (0x1 << irq_id)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_Open -//* \brief Set exception vectors and AIC registers to default values -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_Open( - AT91PS_AIC pAic, // \arg pointer to the AIC registers - void (*IrqHandler) (), // \arg Default IRQ vector exception - void (*FiqHandler) (), // \arg Default FIQ vector exception - void (*DefaultHandler) (), // \arg Default Handler set in ISR - void (*SpuriousHandler) (), // \arg Default Spurious Handler - unsigned int protectMode) // \arg Debug Control Register -{ - int i; - - // Disable all interrupts and set IVR to the default handler - for (i = 0; i < 32; ++i) { - AT91F_AIC_DisableIt(pAic, i); - AT91F_AIC_ConfigureIt(pAic, i, AT91C_AIC_PRIOR_LOWEST, AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, DefaultHandler); - } - - // Set the IRQ exception vector - AT91F_AIC_SetExceptionVector((unsigned int *) 0x18, IrqHandler); - // Set the Fast Interrupt exception vector - AT91F_AIC_SetExceptionVector((unsigned int *) 0x1C, FiqHandler); - - pAic->AIC_SPU = (unsigned int) SpuriousHandler; - pAic->AIC_DCR = protectMode; -} -/* ***************************************************************************** - SOFTWARE API FOR UDP - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EnableIt -//* \brief Enable UDP IT -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EnableIt ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg IT to be enabled -{ - //* Write to the IER register - pUDP->UDP_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_DisableIt -//* \brief Disable UDP IT -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_DisableIt ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg IT to be disabled -{ - //* Write to the IDR register - pUDP->UDP_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_SetAddress -//* \brief Set UDP functional address -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_SetAddress ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char address) // \arg new UDP address -{ - pUDP->UDP_FADDR = (AT91C_UDP_FEN | address); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EnableEp -//* \brief Enable Endpoint -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EnableEp ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg endpoints to be enabled -{ - pUDP->UDP_GLBSTATE |= flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_DisableEp -//* \brief Enable Endpoint -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_DisableEp ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg endpoints to be enabled -{ - pUDP->UDP_GLBSTATE &= ~(flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_SetState -//* \brief Set UDP Device state -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_SetState ( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg new UDP address -{ - pUDP->UDP_GLBSTATE &= ~(AT91C_UDP_FADDEN | AT91C_UDP_CONFG); - pUDP->UDP_GLBSTATE |= flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_GetState -//* \brief return UDP Device state -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_GetState ( // \return the UDP device state - AT91PS_UDP pUDP) // \arg pointer to a UDP controller -{ - return (pUDP->UDP_GLBSTATE & (AT91C_UDP_FADDEN | AT91C_UDP_CONFG)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_ResetEp -//* \brief Reset UDP endpoint -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_ResetEp ( // \return the UDP device state - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned int flag) // \arg Endpoints to be reset -{ - pUDP->UDP_RSTEP = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpStall -//* \brief Endpoint will STALL requests -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpStall( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - pUDP->UDP_CSR[endpoint] |= AT91C_UDP_FORCESTALL; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpWrite -//* \brief Write value in the DPR -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpWrite( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint, // \arg endpoint number - unsigned char value) // \arg value to be written in the DPR -{ - pUDP->UDP_FDR[endpoint] = value; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpRead -//* \brief Return value from the DPR -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_EpRead( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - return pUDP->UDP_FDR[endpoint]; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpEndOfWr -//* \brief Notify the UDP that values in DPR are ready to be sent -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpEndOfWr( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - pUDP->UDP_CSR[endpoint] |= AT91C_UDP_TXPKTRDY; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpClear -//* \brief Clear flag in the endpoint CSR register -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpClear( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint, // \arg endpoint number - unsigned int flag) // \arg flag to be cleared -{ - pUDP->UDP_CSR[endpoint] &= ~(flag); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpSet -//* \brief Set flag in the endpoint CSR register -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_EpSet( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint, // \arg endpoint number - unsigned int flag) // \arg flag to be cleared -{ - pUDP->UDP_CSR[endpoint] |= flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_EpStatus -//* \brief Return the endpoint CSR register -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_EpStatus( - AT91PS_UDP pUDP, // \arg pointer to a UDP controller - unsigned char endpoint) // \arg endpoint number -{ - return pUDP->UDP_CSR[endpoint]; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_GetInterruptMaskStatus -//* \brief Return UDP Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_UDP_GetInterruptMaskStatus( // \return UDP Interrupt Mask Status - AT91PS_UDP pUdp) // \arg pointer to a UDP controller -{ - return pUdp->UDP_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_IsInterruptMasked -//* \brief Test if UDP Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_UDP_IsInterruptMasked( - AT91PS_UDP pUdp, // \arg pointer to a UDP controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_UDP_GetInterruptMaskStatus(pUdp) & flag); -} - -/* ***************************************************************************** - SOFTWARE API FOR ST - ***************************************************************************** */ -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_SetPeriodInterval -//* \brief Set Periodic Interval Interrupt (period in ms) -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_SetPeriodInterval( - AT91PS_ST pSt, - unsigned int period) -{ - volatile int status; - pSt->ST_IDR = AT91C_ST_PITS; /* Interrupt disable Register */ - - status = pSt->ST_SR; - pSt->ST_PIMR = period << 5; /* Period Interval Mode Register == timer interval = 1ms*/ -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_EnableIt -//* \brief Enable system timer interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_EnableIt( - AT91PS_ST pSt, - unsigned int flag) -{ - pSt->ST_IER = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_DisableIt -//* \brief Disable system timer interrupt -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_DisableIt( - AT91PS_ST pSt, - unsigned int flag) -{ - pSt->ST_IDR = flag; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_GetInterruptMaskStatus -//* \brief Return ST Interrupt Mask Status -//*---------------------------------------------------------------------------- -static inline unsigned int AT91F_ST_GetInterruptMaskStatus( // \return ST Interrupt Mask Status - AT91PS_ST pSt) // \arg pointer to a ST controller -{ - return pSt->ST_IMR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_IsInterruptMasked -//* \brief Test if ST Interrupt is Masked -//*---------------------------------------------------------------------------- -static inline int AT91F_ST_IsInterruptMasked( - AT91PS_ST pSt, // \arg pointer to a ST controller - unsigned int flag) // \arg flag to be tested -{ - return (AT91F_ST_GetInterruptMaskStatus(pSt) & flag); -} -//*---------------------------------------------------------------------------- -//* \fn AT91F_EBI_CfgPIO -//* \brief Configure PIO controllers to drive EBI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_EBI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - ((unsigned int) AT91C_PC8_A24 ) | - ((unsigned int) AT91C_PC7_A23 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_CfgPMC -//* \brief Enable Peripheral clock in PMC for DBGU -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DBGU_CfgPIO -//* \brief Configure PIO controllers to drive DBGU signals -//*---------------------------------------------------------------------------- -static inline void AT91F_DBGU_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA31_DTXD ) | - ((unsigned int) AT91C_PA30_DRXD ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SYS_CfgPMC -//* \brief Enable Peripheral clock in PMC for SYS -//*---------------------------------------------------------------------------- -static inline void AT91F_SYS_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UHP_CfgPMC -//* \brief Enable Peripheral clock in PMC for UHP -//*---------------------------------------------------------------------------- -static inline void AT91F_UHP_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_UHP)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SDRC_CfgPIO -//* \brief Configure PIO controllers to drive SDRC signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SDRC_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - ((unsigned int) AT91C_PC20_D20 ) | - ((unsigned int) AT91C_PC21_D21 ) | - ((unsigned int) AT91C_PC30_D30 ) | - ((unsigned int) AT91C_PC22_D22 ) | - ((unsigned int) AT91C_PC31_D31 ) | - ((unsigned int) AT91C_PC23_D23 ) | - ((unsigned int) AT91C_PC16_D16 ) | - ((unsigned int) AT91C_PC24_D24 ) | - ((unsigned int) AT91C_PC17_D17 ) | - ((unsigned int) AT91C_PC25_D25 ) | - ((unsigned int) AT91C_PC18_D18 ) | - ((unsigned int) AT91C_PC26_D26 ) | - ((unsigned int) AT91C_PC19_D19 ) | - ((unsigned int) AT91C_PC27_D27 ) | - ((unsigned int) AT91C_PC28_D28 ) | - ((unsigned int) AT91C_PC29_D29 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_EMAC_CfgPMC -//* \brief Enable Peripheral clock in PMC for EMAC -//*---------------------------------------------------------------------------- -static inline void AT91F_EMAC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_EMAC)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_EMAC_CfgPIO -//* \brief Configure PIO controllers to drive EMAC signals -//*---------------------------------------------------------------------------- -static inline void AT91F_EMAC_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA14_ERXER ) | - ((unsigned int) AT91C_PA12_ERX0 ) | - ((unsigned int) AT91C_PA13_ERX1 ) | - ((unsigned int) AT91C_PA8_ETXEN ) | - ((unsigned int) AT91C_PA16_EMDIO ) | - ((unsigned int) AT91C_PA9_ETX0 ) | - ((unsigned int) AT91C_PA10_ETX1 ) | - ((unsigned int) AT91C_PA11_ECRS_ECRSDV) | - ((unsigned int) AT91C_PA15_EMDC ) | - ((unsigned int) AT91C_PA7_ETXCK_EREFCK), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_RTC_CfgPMC -//* \brief Enable Peripheral clock in PMC for RTC -//*---------------------------------------------------------------------------- -static inline void AT91F_RTC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC2_CfgPMC -//* \brief Enable Peripheral clock in PMC for SSC2 -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC2_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SSC2)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC2_CfgPIO -//* \brief Configure PIO controllers to drive SSC2 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC2_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB12_TF2 ) | - ((unsigned int) AT91C_PB17_RF2 ) | - ((unsigned int) AT91C_PB13_TK2 ) | - ((unsigned int) AT91C_PB16_RK2 ) | - ((unsigned int) AT91C_PB14_TD2 ) | - ((unsigned int) AT91C_PB15_RD2 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC1_CfgPMC -//* \brief Enable Peripheral clock in PMC for SSC1 -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC1_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SSC1)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC1_CfgPIO -//* \brief Configure PIO controllers to drive SSC1 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC1_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB11_RF1 ) | - ((unsigned int) AT91C_PB10_RK1 ) | - ((unsigned int) AT91C_PB8_TD1 ) | - ((unsigned int) AT91C_PB9_RD1 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SSC0_CfgPMC -//* \brief Enable Peripheral clock in PMC for SSC0 -//*---------------------------------------------------------------------------- -static inline void AT91F_SSC0_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SSC0)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgPMC -//* \brief Enable Peripheral clock in PMC for SPI -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SPI)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SPI_CfgPIO -//* \brief Configure PIO controllers to drive SPI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SPI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA3_NPCS0 ) | - ((unsigned int) AT91C_PA4_NPCS1 ) | - ((unsigned int) AT91C_PA1_MOSI ) | - ((unsigned int) AT91C_PA5_NPCS2 ) | - ((unsigned int) AT91C_PA6_NPCS3 ) | - ((unsigned int) AT91C_PA0_MISO ) | - ((unsigned int) AT91C_PA2_SPCK ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC5_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC5 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC5_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC5)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC4_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC4 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC4_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC4)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC3_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC3 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC3_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC3)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC2_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC2 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC2_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC2)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC1_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC1 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC1_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC1)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TC0_CfgPMC -//* \brief Enable Peripheral clock in PMC for TC0 -//*---------------------------------------------------------------------------- -static inline void AT91F_TC0_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TC0)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_SMC2_CfgPIO -//* \brief Configure PIO controllers to drive SMC2 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_SMC2_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - ((unsigned int) AT91C_PC10_NCS4_CFCS) | - ((unsigned int) AT91C_PC9_A25_CFRNW) | - ((unsigned int) AT91C_PC12_NCS6_CFCE2) | - ((unsigned int) AT91C_PC11_NCS5_CFCE1), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_CfgPMC -//* \brief Enable Peripheral clock in PMC for PMC -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PMC_CfgPIO -//* \brief Configure PIO controllers to drive PMC signals -//*---------------------------------------------------------------------------- -static inline void AT91F_PMC_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - 0, // Peripheral A - ((unsigned int) AT91C_PA24_PCK1 )); // Peripheral B - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB27_PCK0 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOD_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOD -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOD_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOD)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOC_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOC -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOC)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOB_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOB -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOB_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOB)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_PIOA_CfgPMC -//* \brief Enable Peripheral clock in PMC for PIOA -//*---------------------------------------------------------------------------- -static inline void AT91F_PIOA_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_PIOA)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_CfgPMC -//* \brief Enable Peripheral clock in PMC for TWI -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_TWI)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_TWI_CfgPIO -//* \brief Configure PIO controllers to drive TWI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_TWI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA25_TWD ) | - ((unsigned int) AT91C_PA26_TWCK ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US3_CfgPMC -//* \brief Enable Peripheral clock in PMC for US3 -//*---------------------------------------------------------------------------- -static inline void AT91F_US3_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US3)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US2_CfgPMC -//* \brief Enable Peripheral clock in PMC for US2 -//*---------------------------------------------------------------------------- -static inline void AT91F_US2_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US2)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US2_CfgPIO -//* \brief Configure PIO controllers to drive US2 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_US2_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA23_TXD2 ) | - ((unsigned int) AT91C_PA22_RXD2 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US1_CfgPMC -//* \brief Enable Peripheral clock in PMC for US1 -//*---------------------------------------------------------------------------- -static inline void AT91F_US1_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US1)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US1_CfgPIO -//* \brief Configure PIO controllers to drive US1 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_US1_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - ((unsigned int) AT91C_PB21_RXD1 ) | - ((unsigned int) AT91C_PB26_RTS1 ) | - ((unsigned int) AT91C_PB25_DSR1 ) | - ((unsigned int) AT91C_PB24_CTS1 ) | - ((unsigned int) AT91C_PB19_DTR1 ) | - ((unsigned int) AT91C_PB23_DCD1 ) | - ((unsigned int) AT91C_PB20_TXD1 ) | - ((unsigned int) AT91C_PB18_RI1 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US0_CfgPMC -//* \brief Enable Peripheral clock in PMC for US0 -//*---------------------------------------------------------------------------- -static inline void AT91F_US0_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_US0)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_US0_CfgPIO -//* \brief Configure PIO controllers to drive US0 signals -//*---------------------------------------------------------------------------- -static inline void AT91F_US0_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA17_TXD0 ) | - ((unsigned int) AT91C_PA21_RTS0 ) | - ((unsigned int) AT91C_PA19_SCK0 ) | - ((unsigned int) AT91C_PA20_CTS0 ), // Peripheral A - 0); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_CfgPMC -//* \brief Enable Peripheral clock in PMC for MCI -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_MCI)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_CfgPIO -//* \brief Configure PIO controllers to drive MCI signals -//*---------------------------------------------------------------------------- -static inline void AT91F_MCI_CfgPIO (void) -{ - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOA, // PIO controller base address - ((unsigned int) AT91C_PA28_MCCDA ) | - ((unsigned int) AT91C_PA29_MCDA0 ) | - ((unsigned int) AT91C_PA27_MCCK ), // Peripheral A - 0); // Peripheral B - // Configure PIO controllers to periph mode - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOB, // PIO controller base address - 0, // Peripheral A - ((unsigned int) AT91C_PB5_MCDA3 ) | - ((unsigned int) AT91C_PB3_MCDA1 ) | - ((unsigned int) AT91C_PB4_MCDA2 )); // Peripheral B -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_AIC_CfgPMC -//* \brief Enable Peripheral clock in PMC for AIC -//*---------------------------------------------------------------------------- -static inline void AT91F_AIC_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_IRQ4) | - ((unsigned int) 1 << AT91C_ID_FIQ) | - ((unsigned int) 1 << AT91C_ID_IRQ5) | - ((unsigned int) 1 << AT91C_ID_IRQ6) | - ((unsigned int) 1 << AT91C_ID_IRQ0) | - ((unsigned int) 1 << AT91C_ID_IRQ1) | - ((unsigned int) 1 << AT91C_ID_IRQ2) | - ((unsigned int) 1 << AT91C_ID_IRQ3)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UDP_CfgPMC -//* \brief Enable Peripheral clock in PMC for UDP -//*---------------------------------------------------------------------------- -static inline void AT91F_UDP_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_UDP)); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_ST_CfgPMC -//* \brief Enable Peripheral clock in PMC for ST -//*---------------------------------------------------------------------------- -static inline void AT91F_ST_CfgPMC (void) -{ - AT91F_PMC_EnablePeriphClock( - AT91C_BASE_PMC, // PIO controller base address - ((unsigned int) 1 << AT91C_ID_SYS)); -} - -#endif // lib_AT91RM9200_H diff --git a/target/linux/at91-2.6/image/dfboot/src/init.c b/target/linux/at91-2.6/image/dfboot/src/init.c deleted file mode 100644 index 4088973f7d..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/init.c +++ /dev/null @@ -1,165 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : init.c -//* Object : Low level initialisations written in C -//* Creation : HIi 10/10/2003 -//* -//*---------------------------------------------------------------------------- -#include "config.h" -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "stdio.h" - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DataAbort -//* \brief This function reports an Abort -//*---------------------------------------------------------------------------- -static void AT91F_SpuriousHandler() -{ - puts("ISI"); - while (1); -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_DataAbort -//* \brief This function reports an Abort -//*---------------------------------------------------------------------------- -static void AT91F_DataAbort() -{ - puts("IDA"); - while (1); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_FetchAbort -//* \brief This function reports an Abort -//*---------------------------------------------------------------------------- -static void AT91F_FetchAbort() -{ - puts("IFA"); - while (1); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_UndefHandler -//* \brief This function reports that no handler have been set for current IT -//*---------------------------------------------------------------------------- -static void AT91F_UndefHandler() -{ - puts("IUD"); - while (1); -} - - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_InitSdram -//* Object : Initialize the SDRAM -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static void AT91F_InitSdram() -{ - int *pRegister; - - //* Configure PIOC as peripheral (D16/D31) - - AT91F_PIO_CfgPeriph( - AT91C_BASE_PIOC, // PIO controller base address - 0xFFFF0030, - 0 - ); - - //*Init SDRAM - pRegister = (int *)0xFFFFFF98; - *pRegister = 0x2188c155; - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x2; - pRegister = (int *)0x20000000; - *pRegister = 0; - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x4; - pRegister = (int *)0x20000000; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - *pRegister = 0; - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x3; - pRegister = (int *)0x20000080; - *pRegister = 0; - - pRegister = (int *)0xFFFFFF94; - *pRegister = 0x2e0; - pRegister = (int *)0x20000000; - *pRegister = 0; - - pRegister = (int *)0xFFFFFF90; - *pRegister = 0x00; - pRegister = (int *)0x20000000; - *pRegister = 0; -} - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_InitFlash -//* \brief This function performs low level HW initialization -//*---------------------------------------------------------------------------- -static void AT91F_InitMemories() -{ - int *pEbi = (int *)0xFFFFFF60; - - //* Setup MEMC to support all connected memories (CS0 = FLASH; CS1=SDRAM) - pEbi = (int *)0xFFFFFF60; - *pEbi = 0x00000002; - - //* CS0 cs for flash - pEbi = (int *)0xFFFFFF70; - *pEbi = 0x00003284; - - AT91F_InitSdram(); -} - - - -//*---------------------------------------------------------------------------- -//* \fn AT91F_LowLevelInit -//* \brief This function performs very low level HW initialization -//*---------------------------------------------------------------------------- -void AT91F_LowLevelInit(void) -{ - int i; - - // Init Interrupt Controller - AT91F_AIC_Open( - AT91C_BASE_AIC, // pointer to the AIC registers - AT91C_AIC_BRANCH_OPCODE, // IRQ exception vector - AT91F_UndefHandler, // FIQ exception vector - AT91F_UndefHandler, // AIC default handler - AT91F_SpuriousHandler, // AIC spurious handler - 0); // Protect mode - - // Perform 8 End Of Interrupt Command to make sýre AIC will not Lock out nIRQ - for(i=0; i<8; i++) - AT91F_AIC_AcknowledgeIt(AT91C_BASE_AIC); - - AT91F_AIC_SetExceptionVector((unsigned int *)0x0C, AT91F_FetchAbort); - AT91F_AIC_SetExceptionVector((unsigned int *)0x10, AT91F_DataAbort); - AT91F_AIC_SetExceptionVector((unsigned int *)0x4, AT91F_UndefHandler); - - //Initialize SDRAM and Flash - AT91F_InitMemories(); - -} - diff --git a/target/linux/at91-2.6/image/dfboot/src/jump.S b/target/linux/at91-2.6/image/dfboot/src/jump.S deleted file mode 100644 index cc69311569..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/jump.S +++ /dev/null @@ -1,4 +0,0 @@ -.global Jump - -Jump: mov pc, r0 - diff --git a/target/linux/at91-2.6/image/dfboot/src/led.c b/target/linux/at91-2.6/image/dfboot/src/led.c deleted file mode 100644 index 40d49113c7..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/led.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - * (C) Copyright 2006 - * Atmel Nordic AB - * Ulf Samuelsson - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -#define GREEN_LED AT91C_PIO_PB0 -#define YELLOW_LED AT91C_PIO_PB1 -#define RED_LED AT91C_PIO_PB2 - -void LED_set(unsigned int led) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - PIOB->PIO_SODR = (led ^ 0x7) & 0x7; // All 0's => Set PIO high => OFF - PIOB->PIO_CODR = led & 0x7; // All 1's => Set PIO low => ON -} - -void green_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_CODR = GREEN_LED; - PIOB->PIO_CODR = (1 << 0); -} - -void yellow_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_CODR = YELLOW_LED; - PIOB->PIO_CODR = (1 << 1); -} - -void red_LED_on(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_CODR = RED_LED; - PIOB->PIO_CODR = (1 << 2); -} - -void green_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_SODR = GREEN_LED; - PIOB->PIO_SODR = (1 << 0); -} - -void yellow_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_SODR = YELLOW_LED; - PIOB->PIO_SODR = (1 << 1); -} - -void red_LED_off(void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; -// PIOB->PIO_SODR = RED_LED; - PIOB->PIO_SODR = (1 << 2); -} - -void LED_blink(unsigned int led) -{ - volatile int i,j; - for(i = 0; i < 5; i++) { - LED_set((1 << led)&0x7); - for(j= 0; j < 200000; j++); - LED_set(0); - for(j= 0; j < 200000; j++); - } -} - - -void LED_init (void) -{ - AT91PS_PIO PIOB = AT91C_BASE_PIOB; - AT91PS_PMC PMC = AT91C_BASE_PMC; - PMC->PMC_PCER = (1 << AT91C_ID_PIOB); // Enable PIOB clock - // Disable peripherals on LEDs - PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - // Enable pins as outputs - PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; - // Turn all LEDs OFF - PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0; -} diff --git a/target/linux/at91-2.6/image/dfboot/src/main.c b/target/linux/at91-2.6/image/dfboot/src/main.c deleted file mode 100644 index c0705dec60..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/main.c +++ /dev/null @@ -1,811 +0,0 @@ -/*---------------------------------------------------------------------------- - * ATMEL Microcontroller Software Support - ROUSSET - - *---------------------------------------------------------------------------- - * The software is delivered "AS IS" without warranty or condition of any - * kind, either express, implied or statutory. This includes without - * limitation any warranty or condition with respect to merchantability or - * fitness for any particular purpose, or against the infringements of - * intellectual property rights of others. - *---------------------------------------------------------------------------- - * File Name : main.c - * Object : - * Creation : HIi 10/10/2003 - * Modif : HIi 15/06/2004 : add crc32 to verify the download - * from dataflash - * : HIi 21/09/2004 : Set first PLLA to 180Mhz and MCK to - * 60Mhz to speed up dataflash boot (15Mhz) - * : MLC 12/04/2005 : Modify SetPLL() to avoid errata - * : USA 30/12/2005 : Change to page Size 1056 - * Change startaddress to C0008400 - * Change SPI Speed to ~4 Mhz - * Add retry on CRC Error - *---------------------------------------------------------------------------- - */ -#include "config.h" -#include "stdio.h" -#include "AT91RM9200.h" -#include "lib_AT91RM9200.h" -#include "com.h" -#include "main.h" -#include "dataflash.h" -#include "AT91C_MCI_Device.h" - -#define DEBUGOUT -#define XMODEM -#define MEMDISP - -#ifdef PAGESZ_1056 -#define PAGESIZE 1056 -#else -#define PAGESIZE 1024 -#endif - -#define AT91C_SDRAM_START 0x20000000 -#define AT91C_BOOT_ADDR 0x21F00000 -#define AT91C_BOOT_SIZE 128*PAGESIZE -#ifdef PAGESZ_1056 -#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008400 -#else -#define AT91C_BOOT_DATAFLASH_ADDR 0xC0008000 -#endif -#define AT91C_PLLA_VALUE 0x237A3E5A // crystal= 18.432MHz - fixes BRG error at 115kbps -//#define AT91C_PLLA_VALUE 0x2026BE04 // crystal= 18.432MHz -//#define AT91C_PLLA_VALUE 0x202CBE01 // crystal= 4MHz - - - -#define DISP_LINE_LEN 16 - -// Reason for boot failure -#define IMAGE_BAD_SIZE 0 -#define IMAGE_READ_FAILURE 1 -#define IMAGE_CRC_ERROR 2 -#define IMAGE_ERROR 3 -#define SUCCESS -1 - -/* prototypes*/ -extern void AT91F_ST_ASM_HANDLER(void); -extern void Jump(unsigned int addr); - -const char *menu_dataflash[] = { -#ifdef XMODEM - "1: P DFboot\n", - "2: P U-Boot\n", -#endif - "3: P SDCard\n", -#ifdef PAGESZ_1056 - "4: R UBOOT\n", -#else - "4: R UBOOT\n", -#endif -#ifdef XMODEM - "5: P DF [addr]\n", -#endif - "6: RD DF [addr]\n", - "7: E DF\n" -}; -#ifdef XMODEM -#define MAXMENU 7 -#else -#define MAXMENU 4 -#endif - -char message[20]; -#ifdef XMODEM -volatile char XmodemComplete = 0; -#endif -unsigned int StTick = 0; - -AT91S_RomBoot const *pAT91; -#ifdef XMODEM -AT91S_SBuffer sXmBuffer; -AT91S_SvcXmodem svcXmodem; -AT91S_Pipe xmodemPipe; -#endif -AT91S_CtlTempo ctlTempo; - - -//*-------------------------------------------------------------------------------------- -//* Function Name : GetTickCount() -//* Object : Return the number of systimer tick -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -unsigned int GetTickCount(void) -{ - return StTick; -} - -#ifdef XMODEM -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91_XmodemComplete() -//* Object : Perform the remap and jump to appli in RAM -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static void AT91_XmodemComplete(AT91S_PipeStatus status, void *pVoid) -{ - /* stop the Xmodem tempo */ - svcXmodem.tempo.Stop(&(svcXmodem.tempo)); - XmodemComplete = 1; -} - - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_XmodemProtocol(AT91S_PipeStatus status, void *pVoid) -//* Object : Xmodem dispatcher -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static void XmodemProtocol(AT91S_PipeStatus status, void *pVoid) -{ - AT91PS_SBuffer pSBuffer = (AT91PS_SBuffer) xmodemPipe.pBuffer->pChild; - AT91PS_USART pUsart = svcXmodem.pUsart; - - if (pSBuffer->szRdBuffer == 0) { - /* Start a tempo to wait the Xmodem protocol complete */ - svcXmodem.tempo.Start(&(svcXmodem.tempo), 10, 0, AT91_XmodemComplete, pUsart); - } -} -#endif - -//*-------------------------------------------------------------------------------------- -//* Function Name : irq1_c_handler() -//* Object : C Interrupt handler for Interrutp source 1 -//* Input Parameters : none -//* Output Parameters : none -//*-------------------------------------------------------------------------------------- -void AT91F_ST_HANDLER(void) -{ - volatile unsigned int csr = *AT91C_DBGU_CSR; -#ifdef XMODEM - unsigned int error; -#endif - - if (AT91C_BASE_ST->ST_SR & 0x01) { - StTick++; - ctlTempo.CtlTempoTick(&ctlTempo); - return; - } - -#ifdef XMODEM - error = AT91F_US_Error((AT91PS_USART)AT91C_BASE_DBGU); - if (csr & error) { - /* Stop previous Xmodem transmition*/ - *(AT91C_DBGU_CR) = AT91C_US_RSTSTA; - AT91F_US_DisableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_ENDRX); - AT91F_US_EnableIt((AT91PS_USART)AT91C_BASE_DBGU, AT91C_US_RXRDY); - - } - - else if (csr & (AT91C_US_TXRDY | AT91C_US_ENDTX | AT91C_US_TXEMPTY | - AT91C_US_RXRDY | AT91C_US_ENDRX | AT91C_US_TIMEOUT | - AT91C_US_RXBUFF)) { - if ( !(svcXmodem.eot) ) - svcXmodem.Handler(&svcXmodem, csr); - } -#endif -} - - -//*----------------------------------------------------------------------------- -//* Function Name : AT91F_DisplayMenu() -//* Object : -//* Input Parameters : -//* Return value : -//*----------------------------------------------------------------------------- -static int AT91F_DisplayMenu(void) -{ - int i, mci_present = 0; - printf("\nDF LOADER %s %s %s\n",AT91C_VERSION,__DATE__,__TIME__); - AT91F_DataflashPrintInfo(); - mci_present = AT91F_MCI_Init(); - for(i = 0; i < MAXMENU; i++) { - puts(menu_dataflash[i]); - } - return mci_present; -} - - -//*----------------------------------------------------------------------------- -//* Function Name : AsciiToHex() -//* Object : ascii to hexa conversion -//* Input Parameters : -//* Return value : -//*----------------------------------------------------------------------------- -static unsigned int AsciiToHex(char *s, unsigned int *val) -{ - int n; - - *val=0; - - if(s[0] == '0' && ((s[1] == 'x') || (s[1] == 'X'))) - s+=2; - n = 0; - while((n < 8) && (s[n] !=0)) - { - *val <<= 4; - if ( (s[n] >= '0') && (s[n] <='9')) - *val += (s[n] - '0'); - else - if ((s[n] >= 'a') && (s[n] <='f')) - *val += (s[n] - 0x57); - else - if ((s[n] >= 'A') && (s[n] <='F')) - *val += (s[n] - 0x37); - else - return 0; - n++; - } - - return 1; -} - - -#ifdef MEMDISP -//*----------------------------------------------------------------------------- -//* Function Name : AT91F_MemoryDisplay() -//* Object : Display the content of the dataflash -//* Input Parameters : -//* Return value : -//*----------------------------------------------------------------------------- -static int AT91F_MemoryDisplay(unsigned int addr, unsigned int length) -{ - unsigned long i, nbytes, linebytes; - char *cp; -// unsigned int *uip; -// unsigned short *usp; - unsigned char *ucp; - char linebuf[DISP_LINE_LEN]; - -// nbytes = length * size; - nbytes = length; - do - { -// uip = (unsigned int *)linebuf; -// usp = (unsigned short *)linebuf; - ucp = (unsigned char *)linebuf; - - printf("%08x:", addr); - linebytes = (nbytes > DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; - if((addr & 0xF0000000) == 0x20000000) { - for(i = 0; i < linebytes; i ++) { - linebuf[i] = *(char *)(addr+i); - } - } else { - read_dataflash(addr, linebytes, linebuf); - } - for (i=0; i 0x7e)) - printf("."); - else - printf("%c", *cp); - cp++; - } - printf("\n"); - nbytes -= linebytes; - } while (nbytes > 0); - return 0; -} -#endif - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_SetPLL -//* Object : Set the PLLA to 180Mhz and Master clock to 60 Mhz -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static unsigned int AT91F_SetPLL(void) -{ - AT91_REG tmp; - AT91PS_PMC pPmc = AT91C_BASE_PMC; - AT91PS_CKGR pCkgr = AT91C_BASE_CKGR; - - pPmc->PMC_IDR = 0xFFFFFFFF; - - /* -Setup the PLL A */ - pCkgr->CKGR_PLLAR = AT91C_PLLA_VALUE; - - while (!(*AT91C_PMC_SR & AT91C_PMC_LOCKA)); - - /* - Switch Master Clock from PLLB to PLLA/3 */ - tmp = pPmc->PMC_MCKR; - /* See Atmel Errata #27 and #28 */ - if (tmp & 0x0000001C) { - tmp = (tmp & ~0x0000001C); - pPmc->PMC_MCKR = tmp; - while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY)); - } - if (tmp != 0x00000202) { - pPmc->PMC_MCKR = 0x00000202; - if ((tmp & 0x00000003) != 0x00000002) - while (!(*AT91C_PMC_SR & AT91C_PMC_MCKRDY)); - } - - return 1; -} - - -//*-------------------------------------------------------------------------------------- -//* Function Name : AT91F_ResetRegisters -//* Object : Restore the initial state to registers -//* Input Parameters : -//* Output Parameters : -//*-------------------------------------------------------------------------------------- -static unsigned int AT91F_ResetRegisters(void) -{ - volatile int i = 0; - - /* set the PIOs in input*/ - /* This disables the UART output, so dont execute for now*/ - -#ifndef DEBUGOUT - *AT91C_PIOA_ODR = 0xFFFFFFFF; /* Disables all the output pins */ - *AT91C_PIOA_PER = 0xFFFFFFFF; /* Enables the PIO to control all the pins */ -#endif - - AT91F_AIC_DisableIt (AT91C_BASE_AIC, AT91C_ID_SYS); - /* close all peripheral clocks */ - -#ifndef DEBUGOUT - AT91C_BASE_PMC->PMC_PCDR = 0xFFFFFFFC; -#endif - /* Disable core interrupts and set supervisor mode */ - __asm__ ("msr CPSR_c, #0xDF"); //* ARM_MODE_SYS(0x1F) | I_BIT(0x80) | F_BIT(0x40) - /* Clear all the interrupts */ - *AT91C_AIC_ICCR = 0xffffffff; - - /* read the AIC_IVR and AIC_FVR */ - i = *AT91C_AIC_IVR; - i = *AT91C_AIC_FVR; - - /* write the end of interrupt control register */ - *AT91C_AIC_EOICR = 0; - - return 1; -} - - -static int AT91F_LoadBoot(void) -{ -// volatile unsigned int crc1 = 0, crc2 = 0; - volatile unsigned int SizeToDownload = 0x21400; - volatile unsigned int AddressToDownload = AT91C_BOOT_ADDR; - -#if 0 - /* Read vector 6 to extract size to load */ - if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, 32, - (char *)AddressToDownload) != AT91C_DATAFLASH_OK) - { - printf("Bad Code Size\n"); - return IMAGE_BAD_SIZE; - } - /* calculate the size to download */ - SizeToDownload = *(int *)(AddressToDownload + AT91C_OFFSET_VECT6); -#endif - -// printf("\nLoad UBOOT from dataflash[%x] to SDRAM[%x]\n", -// AT91C_BOOT_DATAFLASH_ADDR, AT91C_BOOT_ADDR); - if (read_dataflash(AT91C_BOOT_DATAFLASH_ADDR, SizeToDownload + 8, - (char *)AddressToDownload) != AT91C_DATAFLASH_OK) - { - printf("F DF RD\n"); - return IMAGE_READ_FAILURE; - } -#if 0 - pAT91->CRC32((const unsigned char *)AT91C_BOOT_ADDR, - (unsigned int)SizeToDownload , (unsigned int *)&crc2); - crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload)) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24); - - /* Restore the value of Vector 6 */ - *(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = - *(int *)(AddressToDownload + SizeToDownload + 4); - - if (crc1 != crc2) { - printf("DF CRC bad %x != %x\n",crc1,crc2); - return IMAGE_CRC_ERROR; - } -#endif - return SUCCESS; -} - -static int AT91F_StartBoot(void) -{ - int sts; - if((sts = AT91F_LoadBoot()) != SUCCESS) return sts; -// printf("\n"); -// printf("PLLA[180MHz], MCK[60Mhz] ==> Start UBOOT\n"); - if (AT91F_ResetRegisters()) - { - printf("Jump"); - Jump(AT91C_BOOT_ADDR); -// LED_blink(0); - } - return IMAGE_ERROR; -} - -#if 0 -static void AT91F_RepeatedStartBoot(void) -{ - int i; - for(i = 0; i < CRC_RETRIES; i++) { - if(AT91F_StartBoot() != IMAGE_CRC_ERROR){ -// LED_blink(1); - return; - } - } - return; -} -#endif - -#define TRUE 1 -#define FALSE 0 -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_VERSION 1 - -struct trx_header { - unsigned int magic; - unsigned int len; - unsigned int crc32; - unsigned int flag_version; - unsigned int offsets[3]; -}; - -#define AT91C_MCI_TIMEOUT 1000000 - -extern AT91S_MciDevice MCI_Device; -extern void AT91F_MCIDeviceWaitReady(unsigned int); -extern int AT91F_MCI_ReadBlockSwab(AT91PS_MciDevice, int, unsigned int *, int); - -int Program_From_MCI(void) -{ - int i; - unsigned int Max_Read_DataBlock_Length; - int block = 0; - int buffer = AT91C_DOWNLOAD_BASE_ADDRESS; - int bufpos = AT91C_DOWNLOAD_BASE_ADDRESS; - int NbPage = 0; - struct trx_header *p; - - p = (struct trx_header *)bufpos; - - Max_Read_DataBlock_Length = MCI_Device.pMCI_DeviceFeatures->Max_Read_DataBlock_Length; - - AT91F_MCIDeviceWaitReady(AT91C_MCI_TIMEOUT); - - AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length); - - if (p->magic != TRX_MAGIC) { - printf("Inv IMG 0x%08x\n", p->magic); - return FALSE; - } - - printf("RDSD"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC8 | AT91C_PIO_PC14; - for (i=0; i<(p->len/512); i++) { - AT91F_MCI_ReadBlockSwab(&MCI_Device, block*Max_Read_DataBlock_Length, (unsigned int *)bufpos, Max_Read_DataBlock_Length); - block++; - bufpos += Max_Read_DataBlock_Length; - } - - NbPage = 0; - i = dataflash_info[0].Device.pages_number; - while(i >>= 1) - NbPage++; - i = ((p->offsets[1] - p->offsets[0])/ 512) + 1 + (NbPage << 13) + (dataflash_info[0].Device.pages_size << 17); - *(int *)(buffer + p->offsets[0] + AT91C_OFFSET_VECT6) = i; - - printf(" WDFB"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15 | AT91C_PIO_PC14; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8; - write_dataflash(0xc0000000, buffer + p->offsets[0], p->offsets[1] - p->offsets[0]); - printf(" WUB"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC7 | AT91C_PIO_PC15; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC8 | AT91C_PIO_PC14; - write_dataflash(0xc0008000, buffer + p->offsets[1], p->offsets[2] - p->offsets[1]); - printf(" WKRFS"); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC15; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC14; - write_dataflash(0xc0042000, buffer + p->offsets[2], p->len - p->offsets[2]); - AT91C_BASE_PIOC->PIO_CODR = AT91C_PIO_PC8 | AT91C_PIO_PC14; - AT91C_BASE_PIOC->PIO_SODR = AT91C_PIO_PC7 | AT91C_PIO_PC15; - return TRUE; -} - -//*---------------------------------------------------------------------------- -//* Function Name : main -//* Object : Main function -//* Input Parameters : none -//* Output Parameters : True -//*---------------------------------------------------------------------------- -int main(void) -{ -#ifdef XMODEM - AT91PS_Buffer pXmBuffer; - AT91PS_SvcComm pSvcXmodem; -#endif - AT91S_SvcTempo svcBootTempo; // Link to a AT91S_Tempo object - unsigned int ix; - volatile unsigned int AddressToDownload, SizeToDownload; - unsigned int DeviceAddress = 0; - char command = 0; -#ifdef XMODEM - volatile int i = 0; - unsigned int crc1 = 0, crc2 = 0; - volatile int device; - int NbPage; -#endif - volatile int Nb_Device = 0; - int mci_present = 0; - - pAT91 = AT91C_ROM_BOOT_ADDRESS; - - if (!AT91F_SetPLL()) - { - printf("F SetPLL"); - while(1); - } - - at91_init_uarts(); - - /* Tempo Initialisation */ - pAT91->OpenCtlTempo(&ctlTempo, (void *) &(pAT91->SYSTIMER_DESC)); - ctlTempo.CtlTempoStart((void *) &(pAT91->SYSTIMER_DESC)); - - // Attach the tempo to a tempo controler - ctlTempo.CtlTempoCreate(&ctlTempo, &svcBootTempo); -// LED_init(); -// LED_blink(2); - -#ifdef XMODEM - /* Xmodem Initialisation */ - pXmBuffer = pAT91->OpenSBuffer(&sXmBuffer); - pSvcXmodem = pAT91->OpenSvcXmodem(&svcXmodem, - (AT91PS_USART)AT91C_BASE_DBGU, &ctlTempo); - pAT91->OpenPipe(&xmodemPipe, pSvcXmodem, pXmBuffer); -#endif - - /* System Timer initialization */ - AT91F_AIC_ConfigureIt( - AT91C_BASE_AIC, // AIC base address - AT91C_ID_SYS, // System peripheral ID - AT91C_AIC_PRIOR_HIGHEST, // Max priority - AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, // Level sensitive - AT91F_ST_ASM_HANDLER - ); - /* Enable ST interrupt */ - AT91F_AIC_EnableIt(AT91C_BASE_AIC, AT91C_ID_SYS); - -#ifndef PRODTEST - /* Start tempo to start Boot in a delay of - * AT91C_DELAY_TO_BOOT sec if no key pressed */ - svcBootTempo.Start(&svcBootTempo, AT91C_DELAY_TO_BOOT, - 0, AT91F_StartBoot, NULL); -#endif - - while(1) - { - while(command == 0) - { - AddressToDownload = AT91C_DOWNLOAD_BASE_ADDRESS; - SizeToDownload = AT91C_DOWNLOAD_MAX_SIZE; - DeviceAddress = 0; - - /* try to detect Dataflash */ - if (!Nb_Device) - Nb_Device = AT91F_DataflashInit(); - - mci_present = AT91F_DisplayMenu(); - -#ifdef PRODTEST - if (mci_present) { - if (Program_From_MCI()) - AT91F_StartBoot(); - } -#endif - - message[0] = 0; - AT91F_ReadLine ("Enter: ", message); - -#ifndef PRODTEST - /* stop tempo ==> stop autoboot */ - svcBootTempo.Stop(&svcBootTempo); -#endif - - command = message[0]; - for(ix = 1; (message[ix] == ' ') && (ix < 12); ix++); // Skip some whitespace - - if(!AsciiToHex(&message[ix], &DeviceAddress) ) - DeviceAddress = 0; // Illegal DeviceAddress - - switch(command) - { -#ifdef XMODEM - case '1': - case '2': - case '5': - if(command == '1') { - DeviceAddress = 0xC0000000; -// printf("Download DataflashBoot.bin to [0x%x]\n", DeviceAddress); - } else if(command == '2') { - DeviceAddress = AT91C_BOOT_DATAFLASH_ADDR; -// printf("Download u-boot.bin to [0x%x]\n", DeviceAddress); - } else { -// printf("Download Dataflash to [0x%x]\n", DeviceAddress); - } - switch(DeviceAddress & 0xFF000000) - { - case CFG_DATAFLASH_LOGIC_ADDR_CS0: - if (dataflash_info[0].id == 0){ - printf("No DF"); - AT91F_WaitKeyPressed(); - command = 0; - } - - device = 0; - break; - - case CFG_DATAFLASH_LOGIC_ADDR_CS3: - if (dataflash_info[1].id == 0){ - printf("No DF"); - AT91F_WaitKeyPressed(); - command = 0; - } - device = 1; - break; - - default: - command = 0; - break; - } - break; -#endif - - case '3': - if (mci_present) - Program_From_MCI(); - command = 0; - break; - - case '4': - AT91F_StartBoot(); - command = 0; - break; - -#ifdef MEMDISP - case '6': - do - { - AT91F_MemoryDisplay(DeviceAddress, 256); - AT91F_ReadLine (NULL, message); - DeviceAddress += 0x100; - } - while(message[0] == '\0'); - command = 0; - break; -#endif - - case '7': - switch(DeviceAddress & 0xFF000000) - { - case CFG_DATAFLASH_LOGIC_ADDR_CS0: - break; - case CFG_DATAFLASH_LOGIC_ADDR_CS3: - break; - default: - command = 0; - break; - } - - if (command != 0) { - AT91F_ReadLine ("RDY ERA\nSure?", - message); - if(message[0] == 'Y' || message[0] == 'y') { - erase_dataflash(DeviceAddress & 0xFF000000); -// printf("Erase complete\n\n"); - } -// else -// printf("Erase aborted\n"); - } - command = 0; - - break; - - default: - command = 0; - break; - } - } -#ifdef XMODEM - for(i = 0; i <= AT91C_DOWNLOAD_MAX_SIZE; i++) - *(unsigned char *)(AddressToDownload + i) = 0; - - xmodemPipe.Read(&xmodemPipe, (char *)AddressToDownload, - SizeToDownload, XmodemProtocol, 0); - while(XmodemComplete !=1); - SizeToDownload = (unsigned int)((svcXmodem.pData) - - (unsigned int)AddressToDownload); - - /* Modification of vector 6 */ - if ((DeviceAddress == CFG_DATAFLASH_LOGIC_ADDR_CS0)) { - // Vector 6 must be compliant to the BootRom description (ref Datasheet) - NbPage = 0; - i = dataflash_info[device].Device.pages_number; - while(i >>= 1) - NbPage++; - i = (SizeToDownload / 512)+1 + (NbPage << 13) + - (dataflash_info[device].Device.pages_size << 17); //+4 to add crc32 - SizeToDownload = 512 * (i &0xFF); - } - else - { - /* Save the contents of vector 6 ==> will be restored - * at boot time (AT91F_StartBoot) */ - *(int *)(AddressToDownload + SizeToDownload + 4) = - *(int *)(AddressToDownload + AT91C_OFFSET_VECT6); - /* Modify Vector 6 to contain the size of the - * file to copy (Dataflash -> SDRAM)*/ - i = SizeToDownload; - } - - *(int *)(AddressToDownload + AT91C_OFFSET_VECT6) = i; -// printf("\nModification of Arm Vector 6 :%x\n", i); - -// printf("\nWrite %d bytes in DataFlash [0x%x]\n",SizeToDownload, DeviceAddress); - crc1 = 0; - pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc1); - - /* Add the crc32 at the end of the code */ - *(char *)(AddressToDownload + SizeToDownload) = (char)(crc1 & 0x000000FF); - *(char *)(AddressToDownload + SizeToDownload + 1) = (char)((crc1 & 0x0000FF00) >> 8); - *(char *)(AddressToDownload + SizeToDownload + 2) = (char)((crc1 & 0x00FF0000) >> 16); - *(char *)(AddressToDownload + SizeToDownload + 3) = (char)((crc1 & 0xFF000000) >> 24); - - /* write dataflash */ - write_dataflash (DeviceAddress, AddressToDownload, (SizeToDownload + 8)); - - /* clear the buffer before read */ - for(i=0; i <= SizeToDownload; i++) - *(unsigned char *)(AddressToDownload + i) = 0; - - /* Read dataflash to check the validity of the data */ - read_dataflash (DeviceAddress, (SizeToDownload + 4), (char *)(AddressToDownload)); - - printf("VFY: "); - crc2 = 0; - - pAT91->CRC32((const unsigned char *)AddressToDownload, SizeToDownload , &crc2); - crc1 = (int)(*(char *)(AddressToDownload + SizeToDownload)) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 1) << 8) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 2) << 16) + - (int)(*(char *)(AddressToDownload + SizeToDownload + 3) << 24); - - if (crc1 != crc2) - printf("ERR"); - else - printf("OK"); - - command = 0; - XmodemComplete = 0; - AT91F_WaitKeyPressed(); -#endif - } -} - diff --git a/target/linux/at91-2.6/image/dfboot/src/main.h b/target/linux/at91-2.6/image/dfboot/src/main.h deleted file mode 100644 index a8cd325ca9..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/main.h +++ /dev/null @@ -1,43 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : main.h -//* Object : -//* -//* 1.0 27/03/03 HIi : Creation -//* 1.01 03/05/04 HIi : AT9C_VERSION incremented to 1.01 -//* 1.02 15/06/04 HIi : AT9C_VERSION incremented to 1.02 ==> -//* Add crc32 to verify dataflash download -//* 1.03 18/04/05 MLC : AT91C_VERSION incremented to 1.03g -//* Repeat boot on CRC Failure -//* Change Page Size to 1056 -//* Reduce SPI speed to 4 Mbit -//* Change U-Boot boot address to a 1056 byte page boundary -//* 1.04 30/04/05 USA : AT91C_VERSION incremented to 1.04 -//* 1.05 07/08/06 USA : AT91C_VERSION incremented to 1.05 -//* Will only support loading Dataflashboot.bin and U-Boot -//*---------------------------------------------------------------------------- - -#ifndef main_h -#define main_h - -#include "embedded_services.h" - -#define AT91C_DOWNLOAD_BASE_ADDRESS 0x20000000 -#define AT91C_DOWNLOAD_MAX_SIZE 0x00040000 - -#define AT91C_OFFSET_VECT6 0x14 //* Offset for ARM vector 6 - -#define AT91C_VERSION "VER 1.05" - - -// Global variables and functions definition -extern unsigned int GetTickCount(void); -#endif - diff --git a/target/linux/at91-2.6/image/dfboot/src/mci_device.c b/target/linux/at91-2.6/image/dfboot/src/mci_device.c deleted file mode 100644 index cce74a3ae8..0000000000 --- a/target/linux/at91-2.6/image/dfboot/src/mci_device.c +++ /dev/null @@ -1,743 +0,0 @@ -//*---------------------------------------------------------------------------- -//* ATMEL Microcontroller Software Support - ROUSSET - -//*---------------------------------------------------------------------------- -//* The software is delivered "AS IS" without warranty or condition of any -//* kind, either express, implied or statutory. This includes without -//* limitation any warranty or condition with respect to merchantability or -//* fitness for any particular purpose, or against the infringements of -//* intellectual property rights of others. -//*---------------------------------------------------------------------------- -//* File Name : mci_device.c -//* Object : TEST DataFlash Functions -//* Creation : FB 26/11/2002 -//* -//*---------------------------------------------------------------------------- - -#include -#include "stdio.h" - -#define AT91C_MCI_TIMEOUT 1000000 /* For AT91F_MCIDeviceWaitReady */ -#define BUFFER_SIZE_MCI_DEVICE 512 -#define MASTER_CLOCK 60000000 -#define FALSE 0 -#define TRUE 1 - -//* External Functions -extern void AT91F_ASM_MCI_Handler(void); -//* Global Variables -AT91S_MciDeviceFeatures MCI_Device_Features; -AT91S_MciDeviceDesc MCI_Device_Desc; -AT91S_MciDevice MCI_Device; - -#undef ENABLE_WRITE -#undef MMC - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SendCommand -//* \brief Generic function to send a command to the MMC or SDCard -//*---------------------------------------------------------------------------- -int AT91F_MCI_SendCommand ( - AT91PS_MciDevice pMCI_Device, - unsigned int Cmd, - unsigned int Arg) -{ - unsigned int error,status; - //unsigned int tick=0; - - // Send the command - AT91C_BASE_MCI->MCI_ARGR = Arg; - AT91C_BASE_MCI->MCI_CMDR = Cmd; - - // wait for CMDRDY Status flag to read the response - do - { - status = AT91C_BASE_MCI->MCI_SR; - //tick++; - } - while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) ); - - // Test error ==> if crc error and response R3 ==> don't check error - error = (AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR; - if(error != 0 ) - { - // if the command is SEND_OP_COND the CRC error flag is always present (cf : R3 response) - if ( (Cmd != AT91C_SDCARD_APP_OP_COND_CMD) && (Cmd != AT91C_MMC_SEND_OP_COND_CMD) ) - return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); - else - { - if (error != AT91C_MCI_RCRCE) - return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); - } - } - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_SendAppCommand -//* \brief Specific function to send a specific command to the SDCard -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_SendAppCommand ( - AT91PS_MciDevice pMCI_Device, - unsigned int Cmd_App, - unsigned int Arg ) -{ - unsigned int status; - //unsigned int tick=0; - - // Send the CMD55 for application specific command - AT91C_BASE_MCI->MCI_ARGR = (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address << 16 ); - AT91C_BASE_MCI->MCI_CMDR = AT91C_APP_CMD; - - // wait for CMDRDY Status flag to read the response - do - { - status = AT91C_BASE_MCI->MCI_SR; - //tick++; - } - while( !(status & AT91C_MCI_CMDRDY) );//&& (tick<100) ); - - // if an error occurs - if (((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR) != 0 ) - return ((AT91C_BASE_MCI->MCI_SR) & AT91C_MCI_SR_ERROR); - - // check if it is a specific command and then send the command - if ( (Cmd_App && AT91C_SDCARD_APP_ALL_CMD) == 0) - return AT91C_CMD_SEND_ERROR; - - return( AT91F_MCI_SendCommand(pMCI_Device,Cmd_App,Arg) ); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_GetStatus -//* \brief Addressed card sends its status register -//*---------------------------------------------------------------------------- -int AT91F_MCI_GetStatus(AT91PS_MciDevice pMCI_Device,unsigned int relative_card_address) -{ - if (AT91F_MCI_SendCommand(pMCI_Device, - AT91C_SEND_STATUS_CMD, - relative_card_address <<16) == AT91C_CMD_SEND_OK) - return (AT91C_BASE_MCI->MCI_RSPR[0]); - - return AT91C_CMD_SEND_ERROR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Device_Handler -//* \brief MCI C interrupt handler -//*---------------------------------------------------------------------------- -void AT91F_MCI_Device_Handler( - AT91PS_MciDevice pMCI_Device, - unsigned int status) -{ - // If End of Tx Buffer Empty interrupt occurred - if ( status & AT91C_MCI_TXBUFE ) - { - AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_TXBUFE; - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTDIS; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE; - } // End of if AT91C_MCI_TXBUFF - - // If End of Rx Buffer Full interrupt occurred - if ( status & AT91C_MCI_RXBUFF ) - { - AT91C_BASE_MCI->MCI_IDR = AT91C_MCI_RXBUFF; - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTDIS; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_IDLE; - } // End of if AT91C_MCI_RXBUFF - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Handler -//* \brief MCI Handler -//*---------------------------------------------------------------------------- -void AT91F_MCI_Handler(void) -{ - int status; - - status = ( AT91C_BASE_MCI->MCI_SR & AT91C_BASE_MCI->MCI_IMR ); - - AT91F_MCI_Device_Handler(&MCI_Device,status); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_ReadBlock -//* \brief Read an ENTIRE block or PARTIAL block -//*---------------------------------------------------------------------------- -int AT91F_MCI_ReadBlock( - AT91PS_MciDevice pMCI_Device, - int src, - unsigned int *dataBuffer, - int sizeToRead ) -{ - //////////////////////////////////////////////////////////////////////////////////////////// - if(pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE) - return AT91C_READ_ERROR; - - if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA) - return AT91C_READ_ERROR; - - if ( (src + sizeToRead) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity ) - return AT91C_READ_ERROR; - - // If source does not fit a begin of a block - if ( (src % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 ) - return AT91C_READ_ERROR; - - // Test if the MMC supports Partial Read Block - // ALWAYS SUPPORTED IN SD Memory Card - if( (sizeToRead < pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) - && (pMCI_Device->pMCI_DeviceFeatures->Read_Partial == 0x00) ) - return AT91C_READ_ERROR; - - if( sizeToRead > pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) - return AT91C_READ_ERROR; - //////////////////////////////////////////////////////////////////////////////////////////// - - // Init Mode Register - AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length << 16) | AT91C_MCI_PDCMODE); - - if (sizeToRead %4) - sizeToRead = (sizeToRead /4)+1; - else - sizeToRead = sizeToRead/4; - - AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS); - AT91C_BASE_PDC_MCI->PDC_RPR = (unsigned int)dataBuffer; - AT91C_BASE_PDC_MCI->PDC_RCR = sizeToRead; - - // Send the Read single block command - if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_READ_SINGLE_BLOCK_CMD, src) != AT91C_CMD_SEND_OK ) - return AT91C_READ_ERROR; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_RX_SINGLE_BLOCK; - - // Enable AT91C_MCI_RXBUFF Interrupt - AT91C_BASE_MCI->MCI_IER = AT91C_MCI_RXBUFF; - - // (PDC) Receiver Transfer Enable - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_RXTEN; - - return AT91C_READ_OK; -} - - -#ifdef ENABLE_WRITE -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_WriteBlock -//* \brief Write an ENTIRE block but not always PARTIAL block !!! -//*---------------------------------------------------------------------------- -int AT91F_MCI_WriteBlock( - AT91PS_MciDevice pMCI_Device, - int dest, - unsigned int *dataBuffer, - int sizeToWrite ) -{ - //////////////////////////////////////////////////////////////////////////////////////////// - if( pMCI_Device->pMCI_DeviceDesc->state != AT91C_MCI_IDLE) - return AT91C_WRITE_ERROR; - - if( (AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address) & AT91C_SR_READY_FOR_DATA) != AT91C_SR_READY_FOR_DATA) - return AT91C_WRITE_ERROR; - - if ( (dest + sizeToWrite) > pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity ) - return AT91C_WRITE_ERROR; - - // If source does not fit a begin of a block - if ( (dest % pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) != 0 ) - return AT91C_WRITE_ERROR; - - // Test if the MMC supports Partial Write Block - if( (sizeToWrite < pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length) - && (pMCI_Device->pMCI_DeviceFeatures->Write_Partial == 0x00) ) - return AT91C_WRITE_ERROR; - - if( sizeToWrite > pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length ) - return AT91C_WRITE_ERROR; - //////////////////////////////////////////////////////////////////////////////////////////// - - // Init Mode Register - AT91C_BASE_MCI->MCI_MR |= ((pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length << 16) | AT91C_MCI_PDCMODE); - - if (sizeToWrite %4) - sizeToWrite = (sizeToWrite /4)+1; - else - sizeToWrite = sizeToWrite/4; - - // Init PDC for write sequence - AT91C_BASE_PDC_MCI->PDC_PTCR = (AT91C_PDC_TXTDIS | AT91C_PDC_RXTDIS); - AT91C_BASE_PDC_MCI->PDC_TPR = (unsigned int) dataBuffer; - AT91C_BASE_PDC_MCI->PDC_TCR = sizeToWrite; - - // Send the write single block command - if ( AT91F_MCI_SendCommand(pMCI_Device, AT91C_WRITE_BLOCK_CMD, dest) != AT91C_CMD_SEND_OK) - return AT91C_WRITE_ERROR; - - pMCI_Device->pMCI_DeviceDesc->state = AT91C_MCI_TX_SINGLE_BLOCK; - - // Enable AT91C_MCI_TXBUFE Interrupt - AT91C_BASE_MCI->MCI_IER = AT91C_MCI_TXBUFE; - - // Enables TX for PDC transfert requests - AT91C_BASE_PDC_MCI->PDC_PTCR = AT91C_PDC_TXTEN; - - return AT91C_WRITE_OK; -} -#endif - -#ifdef MMC -//*------------------------------------------------------------------------------------------------------------ -//* \fn AT91F_MCI_MMC_SelectCard -//* \brief Toggles a card between the Stand_by and Transfer states or between Programming and Disconnect states -//*------------------------------------------------------------------------------------------------------------ -int AT91F_MCI_MMC_SelectCard(AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address) -{ - int status; - - //* Check if the MMC card chosen is already the selected one - status = AT91F_MCI_GetStatus(pMCI_Device,relative_card_address); - - if (status < 0) - return AT91C_CARD_SELECTED_ERROR; - - if ((status & AT91C_SR_CARD_SELECTED) == AT91C_SR_CARD_SELECTED) - return AT91C_CARD_SELECTED_OK; - - //* Search for the MMC Card to be selected, status = the Corresponding Device Number - status = 0; - while( (pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address != relative_card_address) - && (status < AT91C_MAX_MCI_CARDS) ) - status++; - - if (status > AT91C_MAX_MCI_CARDS) - return AT91C_CARD_SELECTED_ERROR; - - if (AT91F_MCI_SendCommand( pMCI_Device, - AT91C_SEL_DESEL_CARD_CMD, - pMCI_Device->pMCI_DeviceFeatures[status].Relative_Card_Address << 16) == AT91C_CMD_SEND_OK) - return AT91C_CARD_SELECTED_OK; - return AT91C_CARD_SELECTED_ERROR; -} -#endif - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_GetCSD -//* \brief Asks to the specified card to send its CSD -//*---------------------------------------------------------------------------- -int AT91F_MCI_GetCSD (AT91PS_MciDevice pMCI_Device, unsigned int relative_card_address , unsigned int * response) -{ - - if(AT91F_MCI_SendCommand(pMCI_Device, - AT91C_SEND_CSD_CMD, - (relative_card_address << 16)) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - response[0] = AT91C_BASE_MCI->MCI_RSPR[0]; - response[1] = AT91C_BASE_MCI->MCI_RSPR[1]; - response[2] = AT91C_BASE_MCI->MCI_RSPR[2]; - response[3] = AT91C_BASE_MCI->MCI_RSPR[3]; - - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SetBlocklength -//* \brief Select a block length for all following block commands (R/W) -//*---------------------------------------------------------------------------- -int AT91F_MCI_SetBlocklength(AT91PS_MciDevice pMCI_Device,unsigned int length) -{ - return( AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_BLOCKLEN_CMD, length) ); -} - -#ifdef MMC -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_MMC_GetAllOCR -//* \brief Asks to all cards to send their operations conditions -//*---------------------------------------------------------------------------- -int AT91F_MCI_MMC_GetAllOCR (AT91PS_MciDevice pMCI_Device) -{ - unsigned int response =0x0; - - while(1) - { - response = AT91F_MCI_SendCommand(pMCI_Device, - AT91C_MMC_SEND_OP_COND_CMD, - AT91C_MMC_HOST_VOLTAGE_RANGE); - if (response != AT91C_CMD_SEND_OK) - return AT91C_INIT_ERROR; - - response = AT91C_BASE_MCI->MCI_RSPR[0]; - - if ( (response & AT91C_CARD_POWER_UP_BUSY) == AT91C_CARD_POWER_UP_BUSY) - return(response); - } -} -#endif - -#ifdef MMC -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_MMC_GetAllCID -//* \brief Asks to the MMC on the chosen slot to send its CID -//*---------------------------------------------------------------------------- -int AT91F_MCI_MMC_GetAllCID (AT91PS_MciDevice pMCI_Device, unsigned int *response) -{ - int Nb_Cards_Found=-1; - - while(1) - { - if(AT91F_MCI_SendCommand(pMCI_Device, - AT91C_MMC_ALL_SEND_CID_CMD, - AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK) - return Nb_Cards_Found; - else - { - Nb_Cards_Found = 0; - //* Assignation of the relative address to the MMC CARD - pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Relative_Card_Address = Nb_Cards_Found + AT91C_FIRST_RCA; - //* Set the insert flag - pMCI_Device->pMCI_DeviceFeatures[Nb_Cards_Found].Card_Inserted = AT91C_MMC_CARD_INSERTED; - - if (AT91F_MCI_SendCommand(pMCI_Device, - AT91C_MMC_SET_RELATIVE_ADDR_CMD, - (Nb_Cards_Found + AT91C_FIRST_RCA) << 16) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - //* If no error during assignation address ==> Increment Nb_cards_Found - Nb_Cards_Found++ ; - } - } -} -#endif -#ifdef MMC -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_MMC_Init -//* \brief Return the MMC initialisation status -//*---------------------------------------------------------------------------- -int AT91F_MCI_MMC_Init (AT91PS_MciDevice pMCI_Device) -{ - unsigned int tab_response[4]; - unsigned int mult,blocknr; - unsigned int i,Nb_Cards_Found=0; - - //* Resets all MMC Cards in Idle state - AT91F_MCI_SendCommand(pMCI_Device, AT91C_MMC_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT); - - if(AT91F_MCI_MMC_GetAllOCR(pMCI_Device) == AT91C_INIT_ERROR) - return AT91C_INIT_ERROR; - - Nb_Cards_Found = AT91F_MCI_MMC_GetAllCID(pMCI_Device,tab_response); - if (Nb_Cards_Found != AT91C_CMD_SEND_ERROR) - { - //* Set the Mode Register - AT91C_BASE_MCI->MCI_MR = AT91C_MCI_MR_PDCMODE; - - for(i = 0; i < Nb_Cards_Found; i++) - { - if (AT91F_MCI_GetCSD(pMCI_Device, - pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address, - tab_response) != AT91C_CMD_SEND_OK) - pMCI_Device->pMCI_DeviceFeatures[i].Relative_Card_Address = 0; - else - { - pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M ); - pMCI_Device->pMCI_DeviceFeatures[i].Max_Write_DataBlock_Length = 1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M ); - pMCI_Device->pMCI_DeviceFeatures[i].Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v22_SECT_SIZE_S) & AT91C_CSD_v22_SECT_SIZE_M ); - pMCI_Device->pMCI_DeviceFeatures[i].Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M; - pMCI_Device->pMCI_DeviceFeatures[i].Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M; - - // None in MMC specification version 2.2 - pMCI_Device->pMCI_DeviceFeatures[i].Erase_Block_Enable = 0; - - pMCI_Device->pMCI_DeviceFeatures[i].Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M; - pMCI_Device->pMCI_DeviceFeatures[i].Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M; - - //// Compute Memory Capacity - // compute MULT - mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 ); - // compute MSB of C_SIZE - blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2; - // compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR - blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 ); - - pMCI_Device->pMCI_DeviceFeatures[i].Memory_Capacity = pMCI_Device->pMCI_DeviceFeatures[i].Max_Read_DataBlock_Length * blocknr; - //// End of Compute Memory Capacity - - } // end of else - } // end of for - - return AT91C_INIT_OK; - } // end of if - - return AT91C_INIT_ERROR; -} -#endif - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_GetOCR -//* \brief Asks to all cards to send their operations conditions -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_GetOCR (AT91PS_MciDevice pMCI_Device) -{ - unsigned int response =0x0; - - // The RCA to be used for CMD55 in Idle state shall be the card's default RCA=0x0000. - pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = 0x0; - - while( (response & AT91C_CARD_POWER_UP_BUSY) != AT91C_CARD_POWER_UP_BUSY ) - { - response = AT91F_MCI_SDCard_SendAppCommand(pMCI_Device, - AT91C_SDCARD_APP_OP_COND_CMD, - AT91C_MMC_HOST_VOLTAGE_RANGE); - if (response != AT91C_CMD_SEND_OK) - return AT91C_INIT_ERROR; - - response = AT91C_BASE_MCI->MCI_RSPR[0]; - } - - return(AT91C_BASE_MCI->MCI_RSPR[0]); -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_GetCID -//* \brief Asks to the SDCard on the chosen slot to send its CID -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_GetCID (AT91PS_MciDevice pMCI_Device, unsigned int *response) -{ - if(AT91F_MCI_SendCommand(pMCI_Device, - AT91C_ALL_SEND_CID_CMD, - AT91C_NO_ARGUMENT) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - response[0] = AT91C_BASE_MCI->MCI_RSPR[0]; - response[1] = AT91C_BASE_MCI->MCI_RSPR[1]; - response[2] = AT91C_BASE_MCI->MCI_RSPR[2]; - response[3] = AT91C_BASE_MCI->MCI_RSPR[3]; - - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_SetBusWidth -//* \brief Set bus width for SDCard -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_SetBusWidth(AT91PS_MciDevice pMCI_Device) -{ - volatile int ret_value; - char bus_width; - - do - { - ret_value =AT91F_MCI_GetStatus(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address); - } - while((ret_value > 0) && ((ret_value & AT91C_SR_READY_FOR_DATA) == 0)); - - // Select Card - AT91F_MCI_SendCommand(pMCI_Device, - AT91C_SEL_DESEL_CARD_CMD, - (pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address)<<16); - - // Set bus width for Sdcard - if(pMCI_Device->pMCI_DeviceDesc->SDCard_bus_width == AT91C_MCI_SCDBUS) - bus_width = AT91C_BUS_WIDTH_4BITS; - else bus_width = AT91C_BUS_WIDTH_1BIT; - - if (AT91F_MCI_SDCard_SendAppCommand(pMCI_Device,AT91C_SDCARD_SET_BUS_WIDTH_CMD,bus_width) != AT91C_CMD_SEND_OK) - return AT91C_CMD_SEND_ERROR; - - return AT91C_CMD_SEND_OK; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_SDCard_Init -//* \brief Return the SDCard initialisation status -//*---------------------------------------------------------------------------- -int AT91F_MCI_SDCard_Init (AT91PS_MciDevice pMCI_Device) -{ - unsigned int tab_response[4]; - unsigned int mult,blocknr; - - AT91F_MCI_SendCommand(pMCI_Device, AT91C_GO_IDLE_STATE_CMD, AT91C_NO_ARGUMENT); - - if(AT91F_MCI_SDCard_GetOCR(pMCI_Device) == AT91C_INIT_ERROR) - return AT91C_INIT_ERROR; - - if (AT91F_MCI_SDCard_GetCID(pMCI_Device,tab_response) == AT91C_CMD_SEND_OK) - { - pMCI_Device->pMCI_DeviceFeatures->Card_Inserted = AT91C_SD_CARD_INSERTED; - - if (AT91F_MCI_SendCommand(pMCI_Device, AT91C_SET_RELATIVE_ADDR_CMD, 0) == AT91C_CMD_SEND_OK) - { - pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address = (AT91C_BASE_MCI->MCI_RSPR[0] >> 16); - if (AT91F_MCI_GetCSD(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Relative_Card_Address,tab_response) == AT91C_CMD_SEND_OK) - { - pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length = 1 << ((tab_response[1] >> AT91C_CSD_RD_B_LEN_S) & AT91C_CSD_RD_B_LEN_M ); - pMCI_Device->pMCI_DeviceFeatures->Max_Write_DataBlock_Length = 1 << ((tab_response[3] >> AT91C_CSD_WBLEN_S) & AT91C_CSD_WBLEN_M ); - pMCI_Device->pMCI_DeviceFeatures->Sector_Size = 1 + ((tab_response[2] >> AT91C_CSD_v21_SECT_SIZE_S) & AT91C_CSD_v21_SECT_SIZE_M ); - pMCI_Device->pMCI_DeviceFeatures->Read_Partial = (tab_response[1] >> AT91C_CSD_RD_B_PAR_S) & AT91C_CSD_RD_B_PAR_M; - pMCI_Device->pMCI_DeviceFeatures->Write_Partial = (tab_response[3] >> AT91C_CSD_WBLOCK_P_S) & AT91C_CSD_WBLOCK_P_M; - pMCI_Device->pMCI_DeviceFeatures->Erase_Block_Enable = (tab_response[3] >> AT91C_CSD_v21_ER_BLEN_EN_S) & AT91C_CSD_v21_ER_BLEN_EN_M; - pMCI_Device->pMCI_DeviceFeatures->Read_Block_Misalignment = (tab_response[1] >> AT91C_CSD_RD_B_MIS_S) & AT91C_CSD_RD_B_MIS_M; - pMCI_Device->pMCI_DeviceFeatures->Write_Block_Misalignment = (tab_response[1] >> AT91C_CSD_WR_B_MIS_S) & AT91C_CSD_WR_B_MIS_M; - - //// Compute Memory Capacity - // compute MULT - mult = 1 << ( ((tab_response[2] >> AT91C_CSD_C_SIZE_M_S) & AT91C_CSD_C_SIZE_M_M) + 2 ); - // compute MSB of C_SIZE - blocknr = ((tab_response[1] >> AT91C_CSD_CSIZE_H_S) & AT91C_CSD_CSIZE_H_M) << 2; - // compute MULT * (LSB of C-SIZE + MSB already computed + 1) = BLOCKNR - blocknr = mult * ( ( blocknr + ( (tab_response[2] >> AT91C_CSD_CSIZE_L_S) & AT91C_CSD_CSIZE_L_M) ) + 1 ); - - pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity = pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length * blocknr; - //// End of Compute Memory Capacity - printf("SD-Card: %d Bytes\n\r", pMCI_Device->pMCI_DeviceFeatures->Memory_Capacity); - - if( AT91F_MCI_SDCard_SetBusWidth(pMCI_Device) == AT91C_CMD_SEND_OK ) - { - if (AT91F_MCI_SetBlocklength(pMCI_Device,pMCI_Device->pMCI_DeviceFeatures->Max_Read_DataBlock_Length) == AT91C_CMD_SEND_OK) - return AT91C_INIT_OK; - } - } - } - } - return AT91C_INIT_ERROR; -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_CfgDevice -//* \brief This function is used to initialise MMC or SDCard Features -//*---------------------------------------------------------------------------- -void AT91F_CfgDevice(void) -{ - // Init Device Structure - - MCI_Device_Features.Relative_Card_Address = 0; - MCI_Device_Features.Card_Inserted = AT91C_CARD_REMOVED; - MCI_Device_Features.Max_Read_DataBlock_Length = 0; - MCI_Device_Features.Max_Write_DataBlock_Length = 0; - MCI_Device_Features.Read_Partial = 0; - MCI_Device_Features.Write_Partial = 0; - MCI_Device_Features.Erase_Block_Enable = 0; - MCI_Device_Features.Sector_Size = 0; - MCI_Device_Features.Memory_Capacity = 0; - - MCI_Device_Desc.state = AT91C_MCI_IDLE; - MCI_Device_Desc.SDCard_bus_width = AT91C_MCI_SCDBUS; - - // Init AT91S_DataFlash Global Structure, by default AT45DB choosen !!! - MCI_Device.pMCI_DeviceDesc = &MCI_Device_Desc; - MCI_Device.pMCI_DeviceFeatures = &MCI_Device_Features; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCI_Init -//* \brief Initialsise Card -//*---------------------------------------------------------------------------- -int AT91F_MCI_Init(void) -{ - -/////////////////////////////////////////////////////////////////////////////////////////// -// MCI Init : common to MMC and SDCard -/////////////////////////////////////////////////////////////////////////////////////////// - - // Set up PIO SDC_TYPE to switch on MMC/SDCard and not DataFlash Card - AT91F_PIO_CfgOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7); - AT91F_PIO_SetOutput(AT91C_BASE_PIOB,AT91C_PIO_PB7); - - // Init MCI for MMC and SDCard interface - AT91F_MCI_CfgPIO(); - AT91F_MCI_CfgPMC(); - AT91F_PDC_Open(AT91C_BASE_PDC_MCI); - - // Disable all the interrupts - AT91C_BASE_MCI->MCI_IDR = 0xFFFFFFFF; - - // Init MCI Device Structures - AT91F_CfgDevice(); - - // Configure MCI interrupt - AT91F_AIC_ConfigureIt(AT91C_BASE_AIC, - AT91C_ID_MCI, - AT91C_AIC_PRIOR_HIGHEST, - AT91C_AIC_SRCTYPE_INT_LEVEL_SENSITIVE, - AT91F_ASM_MCI_Handler); - - // Enable MCI interrupt - AT91F_AIC_EnableIt(AT91C_BASE_AIC,AT91C_ID_MCI); - - // Enable Receiver - AT91F_US_EnableRx((AT91PS_USART) AT91C_BASE_DBGU); - - AT91F_MCI_Configure(AT91C_BASE_MCI, - AT91C_MCI_DTOR_1MEGA_CYCLES, - AT91C_MCI_MR_PDCMODE, // 15MHz for MCK = 60MHz (CLKDIV = 1) - AT91C_MCI_SDCARD_4BITS_SLOTA); - - if(AT91F_MCI_SDCard_Init(&MCI_Device) != AT91C_INIT_OK) - return FALSE; - else - return TRUE; - -} - -//*---------------------------------------------------------------------------- -//* \fn AT91F_MCIDeviceWaitReady -//* \brief Wait for MCI Device ready -//*---------------------------------------------------------------------------- -void AT91F_MCIDeviceWaitReady(unsigned int timeout) -{ - volatile int status; - - do - { - status = AT91C_BASE_MCI->MCI_SR; - timeout--; - } - while( !(status & AT91C_MCI_NOTBUSY) && (timeout>0) ); -} - -unsigned int swab32(unsigned int data) -{ - unsigned int res = 0; - - res = (data & 0x000000ff) << 24 | - (data & 0x0000ff00) << 8 | - (data & 0x00ff0000) >> 8 | - (data & 0xff000000) >> 24; - - return res; -} - -//*-------------------------------------------------------------------- -//* \fn AT91F_MCI_ReadBlockSwab -//* \brief Read Block and swap byte order -//*-------------------------------------------------------------------- -int AT91F_MCI_ReadBlockSwab( - AT91PS_MciDevice pMCI_Device, - int src, - unsigned int *databuffer, - int sizeToRead) -{ - int i; - unsigned char *buf = (unsigned char *)databuffer; - - //* Read Block 1 - for(i=0;i -#include - -#ifndef NULL -#define NULL ((void *)0) -#endif - -void at91_init_uarts(void); -int puts(const char *str); -int putc(int c); -int putchar(int c); -int getc(); - -int strlen(const char *str); - -int hvfprintf(const char *fmt, va_list ap); - -int printf(const char *fmt, ...); diff --git a/target/linux/at91-2.6/image/u-boot/Makefile b/target/linux/at91-2.6/image/u-boot/Makefile deleted file mode 100644 index 6fd667de12..0000000000 --- a/target/linux/at91-2.6/image/u-boot/Makefile +++ /dev/null @@ -1,50 +0,0 @@ -# -# Copyright (C) 2006 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# -# $Id$ - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=u-boot -PKG_VERSION:=1.1.4 -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 -PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot -PKG_MD5SUM:= -PKG_CAT:=bzcat - -include $(INCLUDE_DIR)/package.mk - -UBOOT_CONFIG=$(strip $(subst ",, $(CONFIG_UBOOT_TARGET))) -LAN_IP=$(strip $(CONFIG_UBOOT_IPADDR)) -LAN_SERVERIP=$(strip $(subst ",, $(CONFIG_UBOOT_SERVERIP))) - -define Build/Compile - $(MAKE) -C $(PKG_BUILD_DIR) $(UBOOT_CONFIG)_config - export CROSS_COMPILE=$(TARGET_CROSS); \ - export LAN_IP=$(LAN_IP); \ - export LAN_SERVERIP=$(LAN_SERVERIP); \ - $(MAKE) -C $(PKG_BUILD_DIR) - mkdir -p $(PKG_BUILD_DIR)/ubclient - $(CP) ./ubclient/* $(PKG_BUILD_DIR)/ubclient - export LAN_IP=$(LAN_IP); \ - export LAN_SERVERIP=$(LAN_SERVERIP); \ - $(MAKE) -C $(PKG_BUILD_DIR)/ubclient \ - $(TARGET_CONFIGURE_OPTS) \ - CFLAGS="$(TARGET_CFLAGS) -Dtarget_$(BOARD)=1" -endef - -define Build/InstallDev - dd if=$(PKG_BUILD_DIR)/u-boot.bin of=$(PKG_BUILD_DIR)/u-boot.block bs=232k count=1 conv=sync -# $(INSTALL_DIR) $(STAGING_DIR)/ubclient/sbin -# $(INSTALL_BIN) $(PKG_BUILD_DIR)/ubclient/ubpar $(STAGING_DIR)/ubclient/sbin/ - $(CP) $(PKG_BUILD_DIR)/ubclient/ubpar ../../base-files/default/sbin -endef - -$(eval $(call Build/DefaultTargets)) diff --git a/target/linux/at91-2.6/image/u-boot/patches/001-lowlevel-config.patch b/target/linux/at91-2.6/image/u-boot/patches/001-lowlevel-config.patch deleted file mode 100644 index 25f92e4963..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/001-lowlevel-config.patch +++ /dev/null @@ -1,91 +0,0 @@ ---- u-boot-1.1.4/cpu/arm920t/config.mk 2005-12-16 17:39:27.000000000 +0100 -+++ u-boot-1.1.4.klaus/cpu/arm920t/config.mk 2006-02-27 19:07:41.000000000 +0100 -@@ -30,5 +30,5 @@ - # Supply options according to compiler version - # - # ========================================================================= --PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) -+PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32) - PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) ---- u-boot-1.1.4/cpu/arm920t/start.S 2005-12-16 17:39:27.000000000 +0100 -+++ u-boot-1.1.4.klaus/cpu/arm920t/start.S 2006-02-22 16:45:24.000000000 +0100 -@@ -237,6 +237,7 @@ - */ - - -+#ifndef CONFIG_SKIP_LOWLEVEL_INIT - cpu_init_crit: - /* - * flush v4 I/D caches -@@ -265,6 +266,7 @@ - mov lr, ip - mov pc, lr - -+#endif - - /* - ************************************************************************* ---- u-boot-1.1.4/examples/Makefile 2005-12-16 17:39:27.000000000 +0100 -+++ u-boot-1.1.4.klaus/examples/Makefile 2006-03-02 02:37:14.000000000 +0100 -@@ -30,7 +30,7 @@ - endif - - ifeq ($(ARCH),arm) --LOAD_ADDR = 0xc100000 -+LOAD_ADDR = 0x21000000 - endif - - ifeq ($(ARCH),mips) ---- u-boot-1.1.4/include/config.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.klaus/include/config.h 2006-02-27 19:04:46.000000000 +0100 -@@ -0,0 +1,2 @@ -+/* Automatically generated - do not edit */ -+#include ---- u-boot-1.1.4/include/config.mk 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.klaus/include/config.mk 2006-02-27 19:04:46.000000000 +0100 -@@ -0,0 +1,4 @@ -+ARCH = arm -+CPU = arm920t -+BOARD = at91rm9200dk -+SOC = at91rm9200 ---- u-boot-1.1.4/include/configs/at91rm9200dk.h 2005-12-16 17:39:27.000000000 +0100 -+++ u-boot-1.1.4.klaus/include/configs/at91rm9200dk.h 2006-02-26 22:44:17.000000000 +0100 -@@ -25,6 +25,11 @@ - #ifndef __CONFIG_H - #define __CONFIG_H - -+// Added 2 defines to skip re-init lowlevel and relocate HCG HLH -+// -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#define CONFIG_SKIP_RELOCATE_UBOOT -+ - /* ARM asynchronous clock */ - #define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ - #define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ -@@ -165,12 +170,12 @@ - #define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ - #define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ - --#undef CFG_ENV_IS_IN_DATAFLASH -+#define CFG_ENV_IS_IN_DATAFLASH - - #ifdef CFG_ENV_IS_IN_DATAFLASH --#define CFG_ENV_OFFSET 0x20000 -+#define CFG_ENV_OFFSET 0x21000 - #define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) --#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ -+#define CFG_ENV_SIZE 0x8400 /* 0x8000 */ - #else - #define CFG_ENV_IS_IN_FLASH 1 - #ifdef CONFIG_SKIP_LOWLEVEL_INIT ---- u-boot-1.1.4/Makefile 2005-12-16 17:39:27.000000000 +0100 -+++ u-boot-1.1.4.klaus/Makefile 2006-03-02 02:49:23.000000000 +0100 -@@ -57,7 +57,7 @@ - CROSS_COMPILE = powerpc-linux- - endif - ifeq ($(ARCH),arm) --CROSS_COMPILE = arm-linux- -+CROSS_COMPILE = ../staging_dir/bin/arm-linux- - endif - ifeq ($(ARCH),i386) - ifeq ($(HOSTARCH),i387) diff --git a/target/linux/at91-2.6/image/u-boot/patches/002-dataflash_machine.patch b/target/linux/at91-2.6/image/u-boot/patches/002-dataflash_machine.patch deleted file mode 100644 index cf7648c522..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/002-dataflash_machine.patch +++ /dev/null @@ -1,6065 +0,0 @@ -diff -Naur u-boot-1.1.4.org/board/vlink/at45.c u-boot-1.1.4.tmp/board/vlink/at45.c ---- u-boot-1.1.4.org/board/vlink/at45.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.tmp/board/vlink/at45.c 2005-12-16 17:39:27.000000000 +0100 -@@ -0,0 +1,621 @@ -+/* Driver for ATMEL DataFlash support -+ * Author : Hamid Ikdoumi (Atmel) -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ * -+ */ -+ -+#include -+#include -+#include -+ -+#ifdef CONFIG_HAS_DATAFLASH -+#include -+ -+#define AT91C_SPI_CLK 10000000 /* Max Value = 10MHz to be compliant to -+the Continuous Array Read function */ -+ -+/* AC Characteristics */ -+/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */ -+#define DATAFLASH_TCSS (0xC << 16) -+#define DATAFLASH_TCHS (0x1 << 24) -+ -+#define AT91C_TIMEOUT_WRDY 200000 -+#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */ -+#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */ -+ -+void AT91F_SpiInit(void) { -+ -+/*-------------------------------------------------------------------*/ -+/* SPI DataFlash Init */ -+/*-------------------------------------------------------------------*/ -+ /* Configure PIOs */ -+ AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | -+ AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK; -+ AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 | -+ AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK; -+ /* Enable CLock */ -+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI; -+ -+ /* Reset the SPI */ -+ AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST; -+ -+ /* Configure SPI in Master Mode with No CS selected !!! */ -+ AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS; -+ -+ /* Configure CS0 and CS3 */ -+ *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & -+ DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); -+ -+ *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & -+ DATAFLASH_TCHS) | ((AT91C_MASTER_CLOCK / (2*AT91C_SPI_CLK)) << 8); -+ -+} -+ -+void AT91F_SpiEnable(int cs) { -+ switch(cs) { -+ case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */ -+ AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; -+ AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS); -+ break; -+ case 3: /* Configure SPI CS3 for Serial DataFlash Card */ -+ /* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */ -+ AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7; /* Set in PIO mode */ -+ AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7; /* Configure in output */ -+ /* Clear Output */ -+ AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7; -+ /* Configure PCS */ -+ AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF; -+ AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS); -+ break; -+ } -+ -+ /* SPI_Enable */ -+ AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN; -+} -+ -+/*----------------------------------------------------------------------------*/ -+/* \fn AT91F_SpiWrite */ -+/* \brief Set the PDC registers for a transfert */ -+/*----------------------------------------------------------------------------*/ -+unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc ) -+{ -+ unsigned int timeout; -+ -+ pDesc->state = BUSY; -+ -+ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; -+ -+ /* Initialize the Transmit and Receive Pointer */ -+ AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ; -+ AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ; -+ -+ /* Intialize the Transmit and Receive Counters */ -+ AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size; -+ AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size; -+ -+ if ( pDesc->tx_data_size != 0 ) { -+ /* Initialize the Next Transmit and Next Receive Pointer */ -+ AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ; -+ AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ; -+ -+ /* Intialize the Next Transmit and Next Receive Counters */ -+ AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ; -+ AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ; -+ } -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked(); -+ timeout = 0; -+ -+ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN; -+ while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT)); -+ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS; -+ pDesc->state = IDLE; -+ -+ if (timeout >= CFG_SPI_WRITE_TOUT){ -+ printf("Error Timeout\n\r"); -+ return DATAFLASH_ERROR; -+ } -+ -+ return DATAFLASH_OK; -+} -+ -+ -+/*----------------------------------------------------------------------*/ -+/* \fn AT91F_DataFlashSendCommand */ -+/* \brief Generic function to send a command to the dataflash */ -+/*----------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_DataFlashSendCommand( -+ AT91PS_DataFlash pDataFlash, -+ unsigned char OpCode, -+ unsigned int CmdSize, -+ unsigned int DataflashAddress) -+{ -+ unsigned int adr; -+ -+ if ( (pDataFlash->pDataFlashDesc->state) != IDLE) -+ return DATAFLASH_BUSY; -+ -+ /* process the address to obtain page address and byte address */ -+ adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size)); -+ -+ /* fill the command buffer */ -+ pDataFlash->pDataFlashDesc->command[0] = OpCode; -+ if (pDataFlash->pDevice->pages_number >= 16384) { -+ pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x0F000000) >> 24); -+ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x00FF0000) >> 16); -+ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((adr & 0x0000FF00) >> 8); -+ pDataFlash->pDataFlashDesc->command[4] = (unsigned char)(adr & 0x000000FF); -+ } else { -+ pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16); -+ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8); -+ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ; -+ pDataFlash->pDataFlashDesc->command[4] = 0; -+ } -+ pDataFlash->pDataFlashDesc->command[5] = 0; -+ pDataFlash->pDataFlashDesc->command[6] = 0; -+ pDataFlash->pDataFlashDesc->command[7] = 0; -+ -+ /* Initialize the SpiData structure for the spi write fuction */ -+ pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; -+ pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize ; -+ pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; -+ pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize ; -+ -+ /* send the command and read the data */ -+ return AT91F_SpiWrite (pDataFlash->pDataFlashDesc); -+} -+ -+ -+/*----------------------------------------------------------------------*/ -+/* \fn AT91F_DataFlashGetStatus */ -+/* \brief Read the status register of the dataflash */ -+/*----------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc) -+{ -+ AT91S_DataFlashStatus status; -+ -+ /* if a transfert is in progress ==> return 0 */ -+ if( (pDesc->state) != IDLE) -+ return DATAFLASH_BUSY; -+ -+ /* first send the read status command (D7H) */ -+ pDesc->command[0] = DB_STATUS; -+ pDesc->command[1] = 0; -+ -+ pDesc->DataFlash_state = GET_STATUS; -+ pDesc->tx_data_size = 0 ; /* Transmit the command and receive response */ -+ pDesc->tx_cmd_pt = pDesc->command ; -+ pDesc->rx_cmd_pt = pDesc->command ; -+ pDesc->rx_cmd_size = 2 ; -+ pDesc->tx_cmd_size = 2 ; -+ status = AT91F_SpiWrite (pDesc); -+ -+ pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1); -+ -+ return status; -+} -+ -+ -+/*----------------------------------------------------------------------*/ -+/* \fn AT91F_DataFlashWaitReady */ -+/* \brief wait for dataflash ready (bit7 of the status register == 1) */ -+/*----------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout) -+{ -+ pDataFlashDesc->DataFlash_state = IDLE; -+ -+ do { -+ AT91F_DataFlashGetStatus(pDataFlashDesc); -+ timeout--; -+ } while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) ); -+ -+ if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) -+ return DATAFLASH_ERROR; -+ -+ return DATAFLASH_OK; -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_DataFlashContinuousRead */ -+/* Object : Continuous stream Read */ -+/* Input Parameters : DataFlash Service */ -+/* : = dataflash address */ -+/* : <*dataBuffer> = data buffer pointer */ -+/* : = data buffer size */ -+/* Return value : State of the dataflash */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_DataFlashContinuousRead ( -+ AT91PS_DataFlash pDataFlash, -+ int src, -+ unsigned char *dataBuffer, -+ int sizeToRead ) -+{ -+ AT91S_DataFlashStatus status; -+ /* Test the size to read in the device */ -+ if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) -+ return DATAFLASH_MEMORY_OVERFLOW; -+ -+ pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer; -+ pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead; -+ pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer; -+ pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead; -+ -+ status = AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src); -+ /* Send the command to the dataflash */ -+ return(status); -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_DataFlashPagePgmBuf */ -+/* Object : Main memory page program through buffer 1 or buffer 2 */ -+/* Input Parameters : DataFlash Service */ -+/* : <*src> = Source buffer */ -+/* : = dataflash destination address */ -+/* : = data buffer size */ -+/* Return value : State of the dataflash */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf( -+ AT91PS_DataFlash pDataFlash, -+ unsigned char *src, -+ unsigned int dest, -+ unsigned int SizeToWrite) -+{ -+ int cmdsize; -+ pDataFlash->pDataFlashDesc->tx_data_pt = src ; -+ pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; -+ pDataFlash->pDataFlashDesc->rx_data_pt = src; -+ pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite; -+ -+ cmdsize = 4; -+ /* Send the command to the dataflash */ -+ if (pDataFlash->pDevice->pages_number >= 16384) -+ cmdsize = 5; -+ return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, cmdsize, dest)); -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_MainMemoryToBufferTransfert */ -+/* Object : Read a page in the SRAM Buffer 1 or 2 */ -+/* Input Parameters : DataFlash Service */ -+/* : Page concerned */ -+/* : */ -+/* Return value : State of the dataflash */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert( -+ AT91PS_DataFlash pDataFlash, -+ unsigned char BufferCommand, -+ unsigned int page) -+{ -+ int cmdsize; -+ /* Test if the buffer command is legal */ -+ if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF)) -+ return DATAFLASH_BAD_COMMAND; -+ -+ /* no data to transmit or receive */ -+ pDataFlash->pDataFlashDesc->tx_data_size = 0; -+ cmdsize = 4; -+ if (pDataFlash->pDevice->pages_number >= 16384) -+ cmdsize = 5; -+ return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, page*pDataFlash->pDevice->pages_size)); -+} -+ -+ -+/*----------------------------------------------------------------------------- */ -+/* Function Name : AT91F_DataFlashWriteBuffer */ -+/* Object : Write data to the internal sram buffer 1 or 2 */ -+/* Input Parameters : DataFlash Service */ -+/* : = command to write buffer1 or buffer2 */ -+/* : <*dataBuffer> = data buffer to write */ -+/* : = address in the internal buffer */ -+/* : = data buffer size */ -+/* Return value : State of the dataflash */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer ( -+ AT91PS_DataFlash pDataFlash, -+ unsigned char BufferCommand, -+ unsigned char *dataBuffer, -+ unsigned int bufferAddress, -+ int SizeToWrite ) -+{ -+ int cmdsize; -+ /* Test if the buffer command is legal */ -+ if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE)) -+ return DATAFLASH_BAD_COMMAND; -+ -+ /* buffer address must be lower than page size */ -+ if (bufferAddress > pDataFlash->pDevice->pages_size) -+ return DATAFLASH_BAD_ADDRESS; -+ -+ if ( (pDataFlash->pDataFlashDesc->state) != IDLE) -+ return DATAFLASH_BUSY; -+ -+ /* Send first Write Command */ -+ pDataFlash->pDataFlashDesc->command[0] = BufferCommand; -+ pDataFlash->pDataFlashDesc->command[1] = 0; -+ if (pDataFlash->pDevice->pages_number >= 16384) { -+ pDataFlash->pDataFlashDesc->command[2] = 0; -+ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; -+ pDataFlash->pDataFlashDesc->command[4] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; -+ cmdsize = 5; -+ } else { -+ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ; -+ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ; -+ pDataFlash->pDataFlashDesc->command[4] = 0; -+ cmdsize = 4; -+ } -+ -+ pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ; -+ pDataFlash->pDataFlashDesc->tx_cmd_size = cmdsize ; -+ pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ; -+ pDataFlash->pDataFlashDesc->rx_cmd_size = cmdsize ; -+ -+ pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer ; -+ pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer ; -+ pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ; -+ pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ; -+ -+ return AT91F_SpiWrite(pDataFlash->pDataFlashDesc); -+} -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_PageErase */ -+/* Object : Erase a page */ -+/* Input Parameters : DataFlash Service */ -+/* : Page concerned */ -+/* : */ -+/* Return value : State of the dataflash */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_PageErase( -+ AT91PS_DataFlash pDataFlash, -+ unsigned int page) -+{ -+ int cmdsize; -+ /* Test if the buffer command is legal */ -+ /* no data to transmit or receive */ -+ pDataFlash->pDataFlashDesc->tx_data_size = 0; -+ -+ cmdsize = 4; -+ if (pDataFlash->pDevice->pages_number >= 16384) -+ cmdsize = 5; -+ return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_ERASE, cmdsize, page*pDataFlash->pDevice->pages_size)); -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_BlockErase */ -+/* Object : Erase a Block */ -+/* Input Parameters : DataFlash Service */ -+/* : Page concerned */ -+/* : */ -+/* Return value : State of the dataflash */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_BlockErase( -+ AT91PS_DataFlash pDataFlash, -+ unsigned int block) -+{ -+ int cmdsize; -+ /* Test if the buffer command is legal */ -+ /* no data to transmit or receive */ -+ pDataFlash->pDataFlashDesc->tx_data_size = 0; -+ cmdsize = 4; -+ if (pDataFlash->pDevice->pages_number >= 16384) -+ cmdsize = 5; -+ return(AT91F_DataFlashSendCommand (pDataFlash, DB_BLOCK_ERASE,cmdsize, block*8*pDataFlash->pDevice->pages_size)); -+} -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_WriteBufferToMain */ -+/* Object : Write buffer to the main memory */ -+/* Input Parameters : DataFlash Service */ -+/* : = command to send to buffer1 or buffer2 */ -+/* : = main memory address */ -+/* Return value : State of the dataflash */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_WriteBufferToMain ( -+ AT91PS_DataFlash pDataFlash, -+ unsigned char BufferCommand, -+ unsigned int dest ) -+{ -+ int cmdsize; -+ /* Test if the buffer command is correct */ -+ if ((BufferCommand != DB_BUF1_PAGE_PGM) && -+ (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) && -+ (BufferCommand != DB_BUF2_PAGE_PGM) && -+ (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) ) -+ return DATAFLASH_BAD_COMMAND; -+ -+ /* no data to transmit or receive */ -+ pDataFlash->pDataFlashDesc->tx_data_size = 0; -+ -+ cmdsize = 4; -+ if (pDataFlash->pDevice->pages_number >= 16384) -+ cmdsize = 5; -+ /* Send the command to the dataflash */ -+ return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, cmdsize, dest)); -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_PartialPageWrite */ -+/* Object : Erase partielly a page */ -+/* Input Parameters : = page number */ -+/* : = adr to begin the fading */ -+/* : = Number of bytes to erase */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_PartialPageWrite ( -+ AT91PS_DataFlash pDataFlash, -+ unsigned char *src, -+ unsigned int dest, -+ unsigned int size) -+{ -+ unsigned int page; -+ unsigned int AdrInPage; -+ -+ page = dest / (pDataFlash->pDevice->pages_size); -+ AdrInPage = dest % (pDataFlash->pDevice->pages_size); -+ -+ /* Read the contents of the page in the Sram Buffer */ -+ AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page); -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ /*Update the SRAM buffer */ -+ AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size); -+ -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ -+ /* Erase page if a 128 Mbits device */ -+ if (pDataFlash->pDevice->pages_number >= 16384) { -+ AT91F_PageErase(pDataFlash, page); -+ /* Rewrite the modified Sram Buffer in the main memory */ -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ } -+ -+ /* Rewrite the modified Sram Buffer in the main memory */ -+ return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size))); -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_DataFlashWrite */ -+/* Object : */ -+/* Input Parameters : <*src> = Source buffer */ -+/* : = dataflash adress */ -+/* : = data buffer size */ -+/*------------------------------------------------------------------------------*/ -+AT91S_DataFlashStatus AT91F_DataFlashWrite( -+ AT91PS_DataFlash pDataFlash, -+ unsigned char *src, -+ int dest, -+ int size ) -+{ -+ unsigned int length; -+ unsigned int page; -+ unsigned int status; -+ -+ AT91F_SpiEnable(pDataFlash->pDevice->cs); -+ -+ if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number))) -+ return DATAFLASH_MEMORY_OVERFLOW; -+ -+ /* If destination does not fit a page start address */ -+ if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) { -+ length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size))); -+ -+ if (size < length) -+ length = size; -+ -+ if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length)) -+ return DATAFLASH_ERROR; -+ -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ -+ /* Update size, source and destination pointers */ -+ size -= length; -+ dest += length; -+ src += length; -+ } -+ -+ while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) { -+ /* program dataflash page */ -+ page = (unsigned int)dest / (pDataFlash->pDevice->pages_size); -+ -+ status = AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, 0, pDataFlash->pDevice->pages_size); -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ -+ status = AT91F_PageErase(pDataFlash, page); -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ if (!status) -+ return DATAFLASH_ERROR; -+ -+ status = AT91F_WriteBufferToMain (pDataFlash, DB_BUF1_PAGE_PGM, dest); -+ if(!status) -+ return DATAFLASH_ERROR; -+ -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ -+ /* Update size, source and destination pointers */ -+ size -= pDataFlash->pDevice->pages_size ; -+ dest += pDataFlash->pDevice->pages_size ; -+ src += pDataFlash->pDevice->pages_size ; -+ } -+ -+ /* If still some bytes to read */ -+ if ( size > 0 ) { -+ /* program dataflash page */ -+ if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) ) -+ return DATAFLASH_ERROR; -+ -+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY); -+ } -+ return DATAFLASH_OK; -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_DataFlashRead */ -+/* Object : Read a block in dataflash */ -+/* Input Parameters : */ -+/* Return value : */ -+/*------------------------------------------------------------------------------*/ -+int AT91F_DataFlashRead( -+ AT91PS_DataFlash pDataFlash, -+ unsigned long addr, -+ unsigned long size, -+ char *buffer) -+{ -+ unsigned long SizeToRead; -+ -+ AT91F_SpiEnable(pDataFlash->pDevice->cs); -+ -+ if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) -+ return -1; -+ -+ while (size) { -+ SizeToRead = (size < 0x8000)? size:0x8000; -+ -+ if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, AT91C_TIMEOUT_WRDY) != DATAFLASH_OK) -+ return -1; -+ -+ if (AT91F_DataFlashContinuousRead (pDataFlash, addr, buffer, SizeToRead) != DATAFLASH_OK) -+ return -1; -+ -+ size -= SizeToRead; -+ addr += SizeToRead; -+ buffer += SizeToRead; -+ } -+ -+ return DATAFLASH_OK; -+} -+ -+ -+/*------------------------------------------------------------------------------*/ -+/* Function Name : AT91F_DataflashProbe */ -+/* Object : */ -+/* Input Parameters : */ -+/* Return value : Dataflash status register */ -+/*------------------------------------------------------------------------------*/ -+int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc) -+{ -+ AT91F_SpiEnable(cs); -+ AT91F_DataFlashGetStatus(pDesc); -+ return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C); -+} -+ -+#endif -diff -Naur u-boot-1.1.4.org/board/vlink/config.mk u-boot-1.1.4.tmp/board/vlink/config.mk ---- u-boot-1.1.4.org/board/vlink/config.mk 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.tmp/board/vlink/config.mk 2005-12-16 17:39:27.000000000 +0100 -@@ -0,0 +1 @@ -+TEXT_BASE = 0x21f00000 -diff -Naur u-boot-1.1.4.org/board/vlink/flash.c u-boot-1.1.4.tmp/board/vlink/flash.c ---- u-boot-1.1.4.org/board/vlink/flash.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.tmp/board/vlink/flash.c 2006-06-05 02:44:43.000000000 +0200 -@@ -0,0 +1,504 @@ -+/* -+ * (C) Copyright 2002 -+ * Lineo, Inc. -+ * Bernhard Kuhn -+ * -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH -+ * Alex Zuepke -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+ -+ulong myflush(void); -+ -+ -+/* Flash Organization Structure */ -+typedef struct OrgDef -+{ -+ unsigned int sector_number; -+ unsigned int sector_size; -+} OrgDef; -+ -+ -+/* Flash Organizations */ -+OrgDef OrgAT49BV16x4[] = -+{ -+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ -+ { 2, 32*1024 }, /* 2 * 32 kBytes sectors */ -+ { 30, 64*1024 }, /* 30 * 64 kBytes sectors */ -+}; -+ -+OrgDef OrgAT49BV16x4A[] = -+{ -+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ -+ { 31, 64*1024 }, /* 31 * 64 kBytes sectors */ -+}; -+ -+OrgDef OrgAT49BV6416[] = -+{ -+ { 8, 8*1024 }, /* 8 * 8 kBytes sectors */ -+ { 127, 64*1024 }, /* 127 * 64 kBytes sectors */ -+}; -+ -+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; -+ -+/* AT49BV1614A Codes */ -+#define FLASH_CODE1 0xAA -+#define FLASH_CODE2 0x55 -+#define ID_IN_CODE 0x90 -+#define ID_OUT_CODE 0xF0 -+ -+ -+#define CMD_READ_ARRAY 0x00F0 -+#define CMD_UNLOCK1 0x00AA -+#define CMD_UNLOCK2 0x0055 -+#define CMD_ERASE_SETUP 0x0080 -+#define CMD_ERASE_CONFIRM 0x0030 -+#define CMD_PROGRAM 0x00A0 -+#define CMD_UNLOCK_BYPASS 0x0020 -+#define CMD_SECTOR_UNLOCK 0x0070 -+ -+#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1))) -+#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1))) -+ -+#define BIT_ERASE_DONE 0x0080 -+#define BIT_RDY_MASK 0x0080 -+#define BIT_PROGRAM_ERROR 0x0020 -+#define BIT_TIMEOUT 0x80000000 /* our flag */ -+ -+#define READY 1 -+#define ERR 2 -+#define TMO 4 -+ -+/*----------------------------------------------------------------------- -+ */ -+void flash_identification (flash_info_t * info) -+{ -+ volatile u16 manuf_code, device_code, add_device_code; -+ -+ MEM_FLASH_ADDR1 = FLASH_CODE1; -+ MEM_FLASH_ADDR2 = FLASH_CODE2; -+ MEM_FLASH_ADDR1 = ID_IN_CODE; -+ -+ manuf_code = *(volatile u16 *) CFG_FLASH_BASE; -+ device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2); -+ add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1)); -+ -+ MEM_FLASH_ADDR1 = FLASH_CODE1; -+ MEM_FLASH_ADDR2 = FLASH_CODE2; -+ MEM_FLASH_ADDR1 = ID_OUT_CODE; -+ -+ /* Vendor type */ -+ info->flash_id = ATM_MANUFACT & FLASH_VENDMASK; -+ printf ("Atmel: "); -+ -+ if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) { -+ -+ if ((add_device_code & FLASH_TYPEMASK) == -+ (ATM_ID_BV1614A & FLASH_TYPEMASK)) { -+ info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK; -+ printf ("AT49BV1614A (16Mbit)\n"); -+ } else { /* AT49BV1614 Flash */ -+ info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK; -+ printf ("AT49BV1614 (16Mbit)\n"); -+ } -+ -+ } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) { -+ info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK; -+ printf ("AT49BV6416 (64Mbit)\n"); -+ } -+} -+ -+ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks) -+{ -+ int i, nb_sectors = 0; -+ -+ for (i=0; istart[sector]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ *addr = CMD_SECTOR_UNLOCK; -+} -+ -+ -+ulong flash_init (void) -+{ -+ int i, j, k; -+ unsigned int flash_nb_blocks, sector; -+ unsigned int start_address; -+ OrgDef *pOrgDef; -+ -+ ulong size = 0; -+ -+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { -+ ulong flashbase = 0; -+ -+ flash_identification (&flash_info[i]); -+ -+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV1614 & FLASH_TYPEMASK)) { -+ -+ pOrgDef = OrgAT49BV16x4; -+ flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef); -+ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */ -+ -+ pOrgDef = OrgAT49BV16x4A; -+ flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef); -+ } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ -+ -+ pOrgDef = OrgAT49BV6416; -+ flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef); -+ } else { -+ flash_nb_blocks = 0; -+ pOrgDef = OrgAT49BV16x4; -+ } -+ -+ flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks); -+ memset (flash_info[i].protect, 0, flash_info[i].sector_count); -+ -+ if (i == 0) -+ flashbase = PHYS_FLASH_1; -+ else -+ panic ("configured too many flash banks!\n"); -+ -+ sector = 0; -+ start_address = flashbase; -+ flash_info[i].size = 0; -+ -+ for (j = 0; j < flash_nb_blocks; j++) { -+ for (k = 0; k < pOrgDef[j].sector_number; k++) { -+ flash_info[i].start[sector++] = start_address; -+ start_address += pOrgDef[j].sector_size; -+ flash_info[i].size += pOrgDef[j].sector_size; -+ } -+ } -+ -+ size += flash_info[i].size; -+ -+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) == -+ (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */ -+ -+ /* Unlock all sectors at reset */ -+ for (j=0; jflash_id & FLASH_VENDMASK) { -+ case (ATM_MANUFACT & FLASH_VENDMASK): -+ printf ("Atmel: "); -+ break; -+ default: -+ printf ("Unknown Vendor "); -+ break; -+ } -+ -+ switch (info->flash_id & FLASH_TYPEMASK) { -+ case (ATM_ID_BV1614 & FLASH_TYPEMASK): -+ printf ("AT49BV1614 (16Mbit)\n"); -+ break; -+ case (ATM_ID_BV1614A & FLASH_TYPEMASK): -+ printf ("AT49BV1614A (16Mbit)\n"); -+ break; -+ case (ATM_ID_BV6416 & FLASH_TYPEMASK): -+ printf ("AT49BV6416 (64Mbit)\n"); -+ break; -+ default: -+ printf ("Unknown Chip Type\n"); -+ return; -+ } -+ -+ printf (" Size: %ld MB in %d Sectors\n", -+ info->size >> 20, info->sector_count); -+ -+ printf (" Sector Start Addresses:"); -+ for (i = 0; i < info->sector_count; i++) { -+ if ((i % 5) == 0) { -+ printf ("\n "); -+ } -+ printf (" %08lX%s", info->start[i], -+ info->protect[i] ? " (RO)" : " "); -+ } -+ printf ("\n"); -+} -+ -+/*----------------------------------------------------------------------- -+ */ -+ -+int flash_erase (flash_info_t * info, int s_first, int s_last) -+{ -+ ulong result; -+ int iflag, cflag, prot, sect; -+ int rc = ERR_OK; -+ int chip1; -+ -+ /* first look for protection bits */ -+ -+ if (info->flash_id == FLASH_UNKNOWN) -+ return ERR_UNKNOWN_FLASH_TYPE; -+ -+ if ((s_first < 0) || (s_first > s_last)) { -+ return ERR_INVAL; -+ } -+ -+ if ((info->flash_id & FLASH_VENDMASK) != -+ (ATM_MANUFACT & FLASH_VENDMASK)) { -+ return ERR_UNKNOWN_FLASH_VENDOR; -+ } -+ -+ prot = 0; -+ for (sect = s_first; sect <= s_last; ++sect) { -+ if (info->protect[sect]) { -+ prot++; -+ } -+ } -+ if (prot) -+ return ERR_PROTECTED; -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ /* Start erase on unprotected sectors */ -+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) { -+ printf ("Erasing sector %2d ... ", sect); -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ if (info->protect[sect] == 0) { /* not protected */ -+ volatile u16 *addr = (volatile u16 *) (info->start[sect]); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP; -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ *addr = CMD_ERASE_CONFIRM; -+ -+ /* wait until flash is ready */ -+ chip1 = 0; -+ -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ chip1 = TMO; -+ break; -+ } -+ -+ if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE) -+ chip1 = READY; -+ -+ } while (!chip1); -+ -+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY; -+ -+ if (chip1 == ERR) { -+ rc = ERR_PROG_ERROR; -+ goto outahere; -+ } -+ if (chip1 == TMO) { -+ rc = ERR_TIMOUT; -+ goto outahere; -+ } -+ -+ printf ("ok.\n"); -+ } else { /* it was protected */ -+ printf ("protected!\n"); -+ } -+ } -+ -+ if (ctrlc ()) -+ printf ("User Interrupt!\n"); -+ -+outahere: -+ /* allow flash to settle - wait 10 ms */ -+ udelay_masked (10000); -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash -+ */ -+ -+volatile static int write_word (flash_info_t * info, ulong dest, -+ ulong data) -+{ -+ volatile u16 *addr = (volatile u16 *) dest; -+ ulong result; -+ int rc = ERR_OK; -+ int cflag, iflag; -+ int chip1; -+ -+ /* -+ * Check if Flash is (sufficiently) erased -+ */ -+ result = *addr; -+ if ((result & data) != data) -+ return ERR_NOT_ERASED; -+ -+ -+ /* -+ * Disable interrupts which might cause a timeout -+ * here. Remember that our exception vectors are -+ * at address 0 in the flash, and we don't want a -+ * (ticker) exception to happen while the flash -+ * chip is in programming mode. -+ */ -+ cflag = icache_status (); -+ icache_disable (); -+ iflag = disable_interrupts (); -+ -+ MEM_FLASH_ADDR1 = CMD_UNLOCK1; -+ MEM_FLASH_ADDR2 = CMD_UNLOCK2; -+ MEM_FLASH_ADDR1 = CMD_PROGRAM; -+ *addr = data; -+ -+ /* arm simple, non interrupt dependent timer */ -+ reset_timer_masked (); -+ -+ /* wait until flash is ready */ -+ chip1 = 0; -+ do { -+ result = *addr; -+ -+ /* check timeout */ -+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { -+ chip1 = ERR | TMO; -+ break; -+ } -+ if (!chip1 && ((result & 0x80) == (data & 0x80))) -+ chip1 = READY; -+ -+ } while (!chip1); -+ -+ *addr = CMD_READ_ARRAY; -+ -+ if (chip1 == ERR || *addr != data) -+ rc = ERR_PROG_ERROR; -+ -+ if (iflag) -+ enable_interrupts (); -+ -+ if (cflag) -+ icache_enable (); -+ -+ return rc; -+} -+ -+/*----------------------------------------------------------------------- -+ * Copy memory to flash. -+ */ -+ -+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt) -+{ -+ ulong wp, data; -+ int rc; -+ -+ if (addr & 1) { -+ printf ("unaligned destination not supported\n"); -+ return ERR_ALIGN; -+ }; -+ -+ if ((int) src & 1) { -+ printf ("unaligned source not supported\n"); -+ return ERR_ALIGN; -+ }; -+ -+ wp = addr; -+ -+ while (cnt >= 2) { -+ data = *((volatile u16 *) src); -+ if ((rc = write_word (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 2; -+ wp += 2; -+ cnt -= 2; -+ } -+ -+ if (cnt == 1) { -+ data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << -+ 8); -+ if ((rc = write_word (info, wp, data)) != 0) { -+ return (rc); -+ } -+ src += 1; -+ wp += 1; -+ cnt -= 1; -+ }; -+ -+ return ERR_OK; -+} -diff -Naur u-boot-1.1.4.org/board/vlink/Makefile u-boot-1.1.4.tmp/board/vlink/Makefile ---- u-boot-1.1.4.org/board/vlink/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.tmp/board/vlink/Makefile 2006-06-05 02:48:33.000000000 +0200 -@@ -0,0 +1,46 @@ -+# -+# (C) Copyright 2003 -+# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -+# -+# See file CREDITS for list of people who contributed to this -+# project. -+# -+# This program is free software; you can redistribute it and/or -+# modify it under the terms of the GNU General Public License as -+# published by the Free Software Foundation; either version 2 of -+# the License, or (at your option) any later version. -+# -+# This program is distributed in the hope that it will be useful, -+# but WITHOUT ANY WARRANTY; without even the implied warranty of -+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+# GNU General Public License for more details. -+# -+# You should have received a copy of the GNU General Public License -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+# MA 02111-1307 USA -+# -+ -+include $(TOPDIR)/config.mk -+ -+LIB = lib$(BOARD).a -+ -+OBJS := vlink.o at45.o flash.o -+ -+$(LIB): $(OBJS) $(SOBJS) -+ $(AR) crv $@ $(OBJS) $(SOBJS) -+ -+clean: -+ rm -f $(SOBJS) $(OBJS) -+ -+distclean: clean -+ rm -f $(LIB) core *.bak .depend -+ -+######################################################################### -+ -+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) -+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ -+ -+-include .depend -+ -+######################################################################### -diff -Naur u-boot-1.1.4.org/board/vlink/u-boot.lds u-boot-1.1.4.tmp/board/vlink/u-boot.lds ---- u-boot-1.1.4.org/board/vlink/u-boot.lds 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.tmp/board/vlink/u-boot.lds 2005-12-16 17:39:27.000000000 +0100 -@@ -0,0 +1,57 @@ -+/* -+ * (C) Copyright 2002 -+ * Gary Jennejohn, DENX Software Engineering, -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -+/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -+OUTPUT_ARCH(arm) -+ENTRY(_start) -+SECTIONS -+{ -+ . = 0x00000000; -+ -+ . = ALIGN(4); -+ .text : -+ { -+ cpu/arm920t/start.o (.text) -+ *(.text) -+ } -+ -+ . = ALIGN(4); -+ .rodata : { *(.rodata) } -+ -+ . = ALIGN(4); -+ .data : { *(.data) } -+ -+ . = ALIGN(4); -+ .got : { *(.got) } -+ -+ . = .; -+ __u_boot_cmd_start = .; -+ .u_boot_cmd : { *(.u_boot_cmd) } -+ __u_boot_cmd_end = .; -+ -+ . = ALIGN(4); -+ __bss_start = .; -+ .bss : { *(.bss) } -+ _end = .; -+} -diff -Naur u-boot-1.1.4.org/board/vlink/vlink.c u-boot-1.1.4.tmp/board/vlink/vlink.c ---- u-boot-1.1.4.org/board/vlink/vlink.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.tmp/board/vlink/vlink.c 2006-06-05 03:10:22.000000000 +0200 -@@ -0,0 +1,89 @@ -+/* -+ * (C) Copyright 2002 -+ * Sysgo Real-Time Solutions, GmbH -+ * Marius Groeger -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+/* ------------------------------------------------------------------------- */ -+/* -+ * Miscelaneous platform dependent initialisations -+ */ -+ -+int board_init (void) -+{ -+ DECLARE_GLOBAL_DATA_PTR; -+ -+ /* Enable Ctrlc */ -+ console_init_f (); -+ -+ /* Correct IRDA resistor problem */ -+ /* Set PA23_TXD in Output */ -+ (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; -+ -+ /* memory and cpu-speed are setup before relocation */ -+ /* so we do _nothing_ here */ -+ -+ /* arch number of Versalink-Board */ -+ gd->bd->bi_arch_number = MACH_TYPE_VLINK; -+ /* adress of boot parameters */ -+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -+ -+ return 0; -+} -+ -+int dram_init (void) -+{ -+ DECLARE_GLOBAL_DATA_PTR; -+ -+ gd->bd->bi_dram[0].start = PHYS_SDRAM; -+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; -+ return 0; -+} -+ -+#ifdef CONFIG_DRIVER_ETHER -+#if (CONFIG_COMMANDS & CFG_CMD_NET) -+ -+/* -+ * Name: -+ * at91rm9200_GetPhyInterface -+ * Description: -+ * Initialise the interface functions to the PHY -+ * Arguments: -+ * None -+ * Return value: -+ * None -+ */ -+void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops) -+{ -+ p_phyops->Init = dm9161_InitPhy; -+ p_phyops->IsPhyConnected = dm9161_IsPhyConnected; -+ p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed; -+ p_phyops->AutoNegotiate = dm9161_AutoNegotiate; -+} -+ -+#endif /* CONFIG_COMMANDS & CFG_CMD_NET */ -+#endif /* CONFIG_DRIVER_ETHER */ -diff -Naur u-boot-1.1.4.org/include/asm-arm/mach-types.h u-boot-1.1.4.tmp/include/asm-arm/mach-types.h ---- u-boot-1.1.4.org/include/asm-arm/mach-types.h 2005-12-16 17:39:27.000000000 +0100 -+++ u-boot-1.1.4.tmp/include/asm-arm/mach-types.h 2006-06-05 01:29:25.000000000 +0200 -@@ -424,7 +424,7 @@ - #define MACH_TYPE_MPORT3S 411 - #define MACH_TYPE_RA_ALPHA 412 - #define MACH_TYPE_XCEP 413 --#define MACH_TYPE_ARCOM_MERCURY 414 -+#define MACH_TYPE_ARCOM_VULCAN 414 - #define MACH_TYPE_STARGATE 415 - #define MACH_TYPE_ARMADILLOJ 416 - #define MACH_TYPE_ELROY_JACK 417 -@@ -457,7 +457,7 @@ - #define MACH_TYPE_XM250 444 - #define MACH_TYPE_T6TC1XB 445 - #define MACH_TYPE_ESS710 446 --#define MACH_TYPE_MX3ADS 447 -+#define MACH_TYPE_MX31ADS 447 - #define MACH_TYPE_HIMALAYA 448 - #define MACH_TYPE_BOLFENK 449 - #define MACH_TYPE_AT91RM9200KR 450 -@@ -563,8 +563,8 @@ - #define MACH_TYPE_ENS_CMU 550 - #define MACH_TYPE_MM6_SDB 551 - #define MACH_TYPE_SATURN 552 --#define MACH_TYPE_ARGONPLUSEVB 553 --#define MACH_TYPE_SCMA11EVB 554 -+#define MACH_TYPE_I30030EVB 553 -+#define MACH_TYPE_MXC27530EVB 554 - #define MACH_TYPE_SMDK2800 555 - #define MACH_TYPE_MTWILSON 556 - #define MACH_TYPE_ZITI 557 -@@ -644,7 +644,7 @@ - #define MACH_TYPE_MX2JAZZ 631 - #define MACH_TYPE_MULTIIO 632 - #define MACH_TYPE_HRDISPLAY 633 --#define MACH_TYPE_SCMA11BB 634 -+#define MACH_TYPE_MXC27530ADS 634 - #define MACH_TYPE_TRIZEPS3 635 - #define MACH_TYPE_ZEFEERDZA 636 - #define MACH_TYPE_ZEFEERDZB 637 -@@ -718,7 +718,7 @@ - #define MACH_TYPE_GEM 707 - #define MACH_TYPE_I858 708 - #define MACH_TYPE_HX2750 709 --#define MACH_TYPE_ZEUSEVB 710 -+#define MACH_TYPE_MXC91131EVB 710 - #define MACH_TYPE_P700 711 - #define MACH_TYPE_CPE 712 - #define MACH_TYPE_SPITZ 713 -@@ -736,6 +736,331 @@ - #define MACH_TYPE_LN2410SBC 725 - #define MACH_TYPE_CB3RUFC 726 - #define MACH_TYPE_MP2USB 727 -+#define MACH_TYPE_NTNP425C 728 -+#define MACH_TYPE_COLIBRI 729 -+#define MACH_TYPE_PCM7220 730 -+#define MACH_TYPE_GATEWAY7001 731 -+#define MACH_TYPE_PCM027 732 -+#define MACH_TYPE_CMPXA 733 -+#define MACH_TYPE_ANUBIS 734 -+#define MACH_TYPE_ITE8152 735 -+#define MACH_TYPE_LPC3XXX 736 -+#define MACH_TYPE_PUPPETEER 737 -+#define MACH_TYPE_MACH_VADATECH 738 -+#define MACH_TYPE_E570 739 -+#define MACH_TYPE_X50 740 -+#define MACH_TYPE_RECON 741 -+#define MACH_TYPE_XBOARDGP8 742 -+#define MACH_TYPE_FPIC2 743 -+#define MACH_TYPE_AKITA 744 -+#define MACH_TYPE_A81 745 -+#define MACH_TYPE_SVM_SC25X 746 -+#define MACH_TYPE_VADATECH020 747 -+#define MACH_TYPE_TLI 748 -+#define MACH_TYPE_EDB9315LC 749 -+#define MACH_TYPE_PASSEC 750 -+#define MACH_TYPE_DS_TIGER 751 -+#define MACH_TYPE_E310 752 -+#define MACH_TYPE_E330 753 -+#define MACH_TYPE_RT3000 754 -+#define MACH_TYPE_NOKIA770 755 -+#define MACH_TYPE_PNX0106 756 -+#define MACH_TYPE_HX21XX 757 -+#define MACH_TYPE_FARADAY 758 -+#define MACH_TYPE_SBC9312 759 -+#define MACH_TYPE_BATMAN 760 -+#define MACH_TYPE_JPD201 761 -+#define MACH_TYPE_MIPSA 762 -+#define MACH_TYPE_KACOM 763 -+#define MACH_TYPE_SWARCOCPU 764 -+#define MACH_TYPE_SWARCODSL 765 -+#define MACH_TYPE_BLUEANGEL 766 -+#define MACH_TYPE_HAIRYGRAMA 767 -+#define MACH_TYPE_BANFF 768 -+#define MACH_TYPE_CARMEVA 769 -+#define MACH_TYPE_SAM255 770 -+#define MACH_TYPE_PPM10 771 -+#define MACH_TYPE_EDB9315A 772 -+#define MACH_TYPE_SUNSET 773 -+#define MACH_TYPE_STARGATE2 774 -+#define MACH_TYPE_INTELMOTE2 775 -+#define MACH_TYPE_TRIZEPS4 776 -+#define MACH_TYPE_MAINSTONE2 777 -+#define MACH_TYPE_EZ_IXP42X 778 -+#define MACH_TYPE_TAPWAVE_ZODIAC 779 -+#define MACH_TYPE_UNIVERSALMETER 780 -+#define MACH_TYPE_HICOARM9 781 -+#define MACH_TYPE_PNX4008 782 -+#define MACH_TYPE_KWS6000 783 -+#define MACH_TYPE_PORTUX920T 784 -+#define MACH_TYPE_EZ_X5 785 -+#define MACH_TYPE_OMAP_RUDOLPH 786 -+#define MACH_TYPE_CPUAT91 787 -+#define MACH_TYPE_REA9200 788 -+#define MACH_TYPE_ACTS_PUNE_SA1110 789 -+#define MACH_TYPE_IXP425 790 -+#define MACH_TYPE_I30030ADS 791 -+#define MACH_TYPE_PERCH 792 -+#define MACH_TYPE_EIS05R1 793 -+#define MACH_TYPE_PEPPERPAD 794 -+#define MACH_TYPE_SB3010 795 -+#define MACH_TYPE_RM9200 796 -+#define MACH_TYPE_DMA03 797 -+#define MACH_TYPE_ROAD_S101 798 -+#define MACH_TYPE_IQ_NEXTGEN_A 799 -+#define MACH_TYPE_IQ_NEXTGEN_B 800 -+#define MACH_TYPE_IQ_NEXTGEN_C 801 -+#define MACH_TYPE_IQ_NEXTGEN_D 802 -+#define MACH_TYPE_IQ_NEXTGEN_E 803 -+#define MACH_TYPE_MALLOW_AT91 804 -+#define MACH_TYPE_CYBERTRACKER_I 805 -+#define MACH_TYPE_GESBC931X 806 -+#define MACH_TYPE_CENTIPAD 807 -+#define MACH_TYPE_ARMSOC 808 -+#define MACH_TYPE_SE4200 809 -+#define MACH_TYPE_EMS197A 810 -+#define MACH_TYPE_MICRO9 811 -+#define MACH_TYPE_MICRO9L 812 -+#define MACH_TYPE_UC5471DSP 813 -+#define MACH_TYPE_SJ5471ENG 814 -+#define MACH_TYPE_CMPXA26X 815 -+#define MACH_TYPE_NC 816 -+#define MACH_TYPE_OMAP_PALMTE 817 -+#define MACH_TYPE_AJAX52X 818 -+#define MACH_TYPE_SIRIUSTAR 819 -+#define MACH_TYPE_IODATA_HDLG 820 -+#define MACH_TYPE_AT91RM9200UTL 821 -+#define MACH_TYPE_BIOSAFE 822 -+#define MACH_TYPE_MP1000 823 -+#define MACH_TYPE_PARSY 824 -+#define MACH_TYPE_CCXP 825 -+#define MACH_TYPE_OMAP_GSAMPLE 826 -+#define MACH_TYPE_REALVIEW_EB 827 -+#define MACH_TYPE_SAMOA 828 -+#define MACH_TYPE_T3XSCALE 829 -+#define MACH_TYPE_I878 830 -+#define MACH_TYPE_BORZOI 831 -+#define MACH_TYPE_GECKO 832 -+#define MACH_TYPE_DS101 833 -+#define MACH_TYPE_OMAP_PALMTT2 834 -+#define MACH_TYPE_XSCALE_PALMLD 835 -+#define MACH_TYPE_CC9C 836 -+#define MACH_TYPE_SBC1670 837 -+#define MACH_TYPE_IXDP28X5 838 -+#define MACH_TYPE_OMAP_PALMTT 839 -+#define MACH_TYPE_ML696K 840 -+#define MACH_TYPE_ARCOM_ZEUS 841 -+#define MACH_TYPE_OSIRIS 842 -+#define MACH_TYPE_MAESTRO 843 -+#define MACH_TYPE_TUNGE2 844 -+#define MACH_TYPE_IXBBM 845 -+#define MACH_TYPE_MX27 846 -+#define MACH_TYPE_AX8004 847 -+#define MACH_TYPE_AT91SAM9261EK 848 -+#define MACH_TYPE_LOFT 849 -+#define MACH_TYPE_MAGPIE 850 -+#define MACH_TYPE_MX21 851 -+#define MACH_TYPE_MB87M3400 852 -+#define MACH_TYPE_MGUARD_DELTA 853 -+#define MACH_TYPE_DAVINCI_DVDP 854 -+#define MACH_TYPE_HTCUNIVERSAL 855 -+#define MACH_TYPE_TPAD 856 -+#define MACH_TYPE_ROVERP3 857 -+#define MACH_TYPE_JORNADA928 858 -+#define MACH_TYPE_MV88FXX81 859 -+#define MACH_TYPE_STMP36XX 860 -+#define MACH_TYPE_SXNI79524 861 -+#define MACH_TYPE_AMS_DELTA 862 -+#define MACH_TYPE_URANIUM 863 -+#define MACH_TYPE_UCON 864 -+#define MACH_TYPE_NAS100D 865 -+#define MACH_TYPE_L083_1000 866 -+#define MACH_TYPE_EZX 867 -+#define MACH_TYPE_PNX5220 868 -+#define MACH_TYPE_BUTTE 869 -+#define MACH_TYPE_SRM2 870 -+#define MACH_TYPE_DSBR 871 -+#define MACH_TYPE_CRYSTALBALL 872 -+#define MACH_TYPE_TINYPXA27X 873 -+#define MACH_TYPE_HERBIE 874 -+#define MACH_TYPE_MAGICIAN 875 -+#define MACH_TYPE_CM4002 876 -+#define MACH_TYPE_B4 877 -+#define MACH_TYPE_MAUI 878 -+#define MACH_TYPE_CYBERTRACKER_G 879 -+#define MACH_TYPE_NXDKN 880 -+#define MACH_TYPE_MIO8390 881 -+#define MACH_TYPE_OMI_BOARD 882 -+#define MACH_TYPE_MX21CIV 883 -+#define MACH_TYPE_MAHI_CDAC 884 -+#define MACH_TYPE_XSCALE_PALMTX 885 -+#define MACH_TYPE_S3C2413 887 -+#define MACH_TYPE_SAMSYS_EP0 888 -+#define MACH_TYPE_WG302V1 889 -+#define MACH_TYPE_WG302V2 890 -+#define MACH_TYPE_EB42X 891 -+#define MACH_TYPE_IQ331ES 892 -+#define MACH_TYPE_COSYDSP 893 -+#define MACH_TYPE_UPLAT7D 894 -+#define MACH_TYPE_PTDAVINCI 895 -+#define MACH_TYPE_MBUS 896 -+#define MACH_TYPE_NADIA2VB 897 -+#define MACH_TYPE_R1000 898 -+#define MACH_TYPE_HW90250 899 -+#define MACH_TYPE_OMAP_2430SDP 900 -+#define MACH_TYPE_DAVINCI_EVM 901 -+#define MACH_TYPE_OMAP_TORNADO 902 -+#define MACH_TYPE_OLOCREEK 903 -+#define MACH_TYPE_PALMZ72 904 -+#define MACH_TYPE_NXDB500 905 -+#define MACH_TYPE_APF9328 906 -+#define MACH_TYPE_OMAP_WIPOQ 907 -+#define MACH_TYPE_OMAP_TWIP 908 -+#define MACH_TYPE_XSCALE_PALMTREO650 909 -+#define MACH_TYPE_ACUMEN 910 -+#define MACH_TYPE_XP100 911 -+#define MACH_TYPE_FS2410 912 -+#define MACH_TYPE_PXA270_CERF 913 -+#define MACH_TYPE_SQ2FTLPALM 914 -+#define MACH_TYPE_BSEMSERVER 915 -+#define MACH_TYPE_NETCLIENT 916 -+#define MACH_TYPE_XSCALE_PALMTT5 917 -+#define MACH_TYPE_OMAP_PALMTC 918 -+#define MACH_TYPE_OMAP_APOLLON 919 -+#define MACH_TYPE_MXC30030EVB 920 -+#define MACH_TYPE_REA_2D 921 -+#define MACH_TYPE_TI3E524 922 -+#define MACH_TYPE_ATEB9200 923 -+#define MACH_TYPE_AUCKLAND 924 -+#define MACH_TYPE_AK3320M 925 -+#define MACH_TYPE_DURAMAX 926 -+#define MACH_TYPE_N35 927 -+#define MACH_TYPE_PRONGHORN 928 -+#define MACH_TYPE_FUNDY 929 -+#define MACH_TYPE_LOGICPD_PXA270 930 -+#define MACH_TYPE_CPU777 931 -+#define MACH_TYPE_SIMICON9201 932 -+#define MACH_TYPE_LEAP2_HPM 933 -+#define MACH_TYPE_CM922TXA10 934 -+#define MACH_TYPE_PXA 935 -+#define MACH_TYPE_SANDGATE2 936 -+#define MACH_TYPE_SANDGATE2G 937 -+#define MACH_TYPE_SANDGATE2P 938 -+#define MACH_TYPE_FRED_JACK 939 -+#define MACH_TYPE_TTG_COLOR1 940 -+#define MACH_TYPE_NXEB500HMI 941 -+#define MACH_TYPE_NETDCU8 942 -+#define MACH_TYPE_ML675050_CPU_BOA 943 -+#define MACH_TYPE_NG_FVX538 944 -+#define MACH_TYPE_NG_FVS338 945 -+#define MACH_TYPE_PNX4103 946 -+#define MACH_TYPE_HESDB 947 -+#define MACH_TYPE_XSILO 948 -+#define MACH_TYPE_ESPRESSO 949 -+#define MACH_TYPE_EMLC 950 -+#define MACH_TYPE_SISTERON 951 -+#define MACH_TYPE_RX1950 952 -+#define MACH_TYPE_TSC_VENUS 953 -+#define MACH_TYPE_DS101J 954 -+#define MACH_TYPE_MXC30030ADS 955 -+#define MACH_TYPE_FUJITSU_WIMAXSOC 956 -+#define MACH_TYPE_DUALPCMODEM 957 -+#define MACH_TYPE_GESBC9312 958 -+#define MACH_TYPE_HTCAPACHE 959 -+#define MACH_TYPE_IXDP435 960 -+#define MACH_TYPE_CATPROVT100 961 -+#define MACH_TYPE_PICOTUX1XX 962 -+#define MACH_TYPE_PICOTUX2XX 963 -+#define MACH_TYPE_DSMG600 964 -+#define MACH_TYPE_EMPC2 965 -+#define MACH_TYPE_VENTURA 966 -+#define MACH_TYPE_PHIDGET_SBC 967 -+#define MACH_TYPE_IJ3K 968 -+#define MACH_TYPE_PISGAH 969 -+#define MACH_TYPE_OMAP_FSAMPLE 970 -+#define MACH_TYPE_SG720 971 -+#define MACH_TYPE_REDFOX 972 -+#define MACH_TYPE_MYSH_EP9315_1 973 -+#define MACH_TYPE_TPF106 974 -+#define MACH_TYPE_AT91RM9200KG 975 -+#define MACH_TYPE_SLEDB 976 -+#define MACH_TYPE_ONTRACK 977 -+#define MACH_TYPE_PM1200 978 -+#define MACH_TYPE_ESS24XXX 979 -+#define MACH_TYPE_COREMP7 980 -+#define MACH_TYPE_NEXCODER_6446 981 -+#define MACH_TYPE_STVC8380 982 -+#define MACH_TYPE_TEKLYNX 983 -+#define MACH_TYPE_CARBONADO 984 -+#define MACH_TYPE_SYSMOS_MP730 985 -+#define MACH_TYPE_SNAPPER_CL15 986 -+#define MACH_TYPE_PGIGIM 987 -+#define MACH_TYPE_PTX9160P2 988 -+#define MACH_TYPE_DCORE1 989 -+#define MACH_TYPE_VICTORPXA 990 -+#define MACH_TYPE_MX2DTB 991 -+#define MACH_TYPE_PXA_IREX_ER0100 992 -+#define MACH_TYPE_OMAP_PALMZ71 993 -+#define MACH_TYPE_BARTEC_DEG 994 -+#define MACH_TYPE_HW50251 995 -+#define MACH_TYPE_IBOX 996 -+#define MACH_TYPE_ATLASLH7A404 997 -+#define MACH_TYPE_PT2026 998 -+#define MACH_TYPE_HTCALPINE 999 -+#define MACH_TYPE_BARTEC_VTU 1000 -+#define MACH_TYPE_VCOREII 1001 -+#define MACH_TYPE_PDNB3 1002 -+#define MACH_TYPE_HTCBEETLES 1003 -+#define MACH_TYPE_S3C6400 1004 -+#define MACH_TYPE_S3C2443 1005 -+#define MACH_TYPE_OMAP_LDK 1006 -+#define MACH_TYPE_SMDK2460 1007 -+#define MACH_TYPE_SMDK2440 1008 -+#define MACH_TYPE_SMDK2412 1009 -+#define MACH_TYPE_WEBBOX 1010 -+#define MACH_TYPE_CWWNDP 1011 -+#define MACH_TYPE_DRAGON 1012 -+#define MACH_TYPE_OPENDO_CPU_BOARD 1013 -+#define MACH_TYPE_CCM2200 1014 -+#define MACH_TYPE_ETWARM 1015 -+#define MACH_TYPE_M93030 1016 -+#define MACH_TYPE_CC7U 1017 -+#define MACH_TYPE_MTT_RANGER 1018 -+#define MACH_TYPE_NEXUS 1019 -+#define MACH_TYPE_DESMAN 1020 -+#define MACH_TYPE_BKDE303 1021 -+#define MACH_TYPE_SMDK2413 1022 -+#define MACH_TYPE_AML_M7200 1023 -+#define MACH_TYPE_AML_M5900 1024 -+#define MACH_TYPE_SG640 1025 -+#define MACH_TYPE_EDG79524 1026 -+#define MACH_TYPE_AI2410 1027 -+#define MACH_TYPE_IXP465 1028 -+#define MACH_TYPE_BALLOON3 1029 -+#define MACH_TYPE_HEINS 1030 -+#define MACH_TYPE_MPLUSEVA 1031 -+#define MACH_TYPE_RT042 1032 -+#define MACH_TYPE_CWIEM 1033 -+#define MACH_TYPE_CM_X270 1034 -+#define MACH_TYPE_CM_X255 1035 -+#define MACH_TYPE_ESH_AT91 1036 -+#define MACH_TYPE_SANDGATE3 1037 -+#define MACH_TYPE_PRIMO 1038 -+#define MACH_TYPE_GEMSTONE 1039 -+#define MACH_TYPE_PRONGHORNMETRO 1040 -+#define MACH_TYPE_SIDEWINDER 1041 -+#define MACH_TYPE_PICOMOD1 1042 -+#define MACH_TYPE_SG590 1043 -+#define MACH_TYPE_AKAI9307 1044 -+#define MACH_TYPE_FONTAINE 1045 -+#define MACH_TYPE_WOMBAT 1046 -+#define MACH_TYPE_ACQ300 1047 -+#define MACH_TYPE_MOD_270 1048 -+#define MACH_TYPE_VC0820 1049 -+#define MACH_TYPE_ANI_AIM 1050 -+#define MACH_TYPE_JELLYFISH 1051 -+#define MACH_TYPE_AMANITA 1052 -+#define MACH_TYPE_VLINK 1053 - - #ifdef CONFIG_ARCH_EBSA110 - # ifdef machine_arch_type -@@ -3540,9 +3865,9 @@ - # else - # define machine_arch_type MACH_TYPE_RAMSES - # endif --# define machine_is_ramses() (machine_arch_type == MACH_TYPE_RAMSES) -+# define machine_is_mnci() (machine_arch_type == MACH_TYPE_RAMSES) - #else --# define machine_is_ramses() (0) -+# define machine_is_mnci() (0) - #endif - - #ifdef CONFIG_ARCH_S28X -@@ -4500,9 +4825,9 @@ - # else - # define machine_arch_type MACH_TYPE_M825XX - # endif --# define machine_is_m825xx() (machine_arch_type == MACH_TYPE_M825XX) -+# define machine_is_comcerto() (machine_arch_type == MACH_TYPE_M825XX) - #else --# define machine_is_m825xx() (0) -+# define machine_is_comcerto() (0) - #endif - - #ifdef CONFIG_SA1100_M7100 -@@ -5657,16 +5982,16 @@ - # define machine_is_xcep() (0) - #endif - --#ifdef CONFIG_MACH_ARCOM_MERCURY -+#ifdef CONFIG_MACH_ARCOM_VULCAN - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_ARCOM_MERCURY -+# define machine_arch_type MACH_TYPE_ARCOM_VULCAN - # endif --# define machine_is_arcom_mercury() (machine_arch_type == MACH_TYPE_ARCOM_MERCURY) -+# define machine_is_arcom_vulcan() (machine_arch_type == MACH_TYPE_ARCOM_VULCAN) - #else --# define machine_is_arcom_mercury() (0) -+# define machine_is_arcom_vulcan() (0) - #endif - - #ifdef CONFIG_MACH_STARGATE -@@ -6053,16 +6378,16 @@ - # define machine_is_ess710() (0) - #endif - --#ifdef CONFIG_MACH_MX3ADS -+#ifdef CONFIG_MACH_MX31ADS - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_MX3ADS -+# define machine_arch_type MACH_TYPE_MX31ADS - # endif --# define machine_is_mx3ads() (machine_arch_type == MACH_TYPE_MX3ADS) -+# define machine_is_mx31ads() (machine_arch_type == MACH_TYPE_MX31ADS) - #else --# define machine_is_mx3ads() (0) -+# define machine_is_mx31ads() (0) - #endif - - #ifdef CONFIG_MACH_HIMALAYA -@@ -7325,28 +7650,28 @@ - # define machine_is_saturn() (0) - #endif - --#ifdef CONFIG_MACH_ARGONPLUSEVB -+#ifdef CONFIG_MACH_I30030EVB - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_ARGONPLUSEVB -+# define machine_arch_type MACH_TYPE_I30030EVB - # endif --# define machine_is_argonplusevb() (machine_arch_type == MACH_TYPE_ARGONPLUSEVB) -+# define machine_is_i30030evb() (machine_arch_type == MACH_TYPE_I30030EVB) - #else --# define machine_is_argonplusevb() (0) -+# define machine_is_i30030evb() (0) - #endif - --#ifdef CONFIG_MACH_SCMA11EVB -+#ifdef CONFIG_MACH_MXC27530EVB - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_SCMA11EVB -+# define machine_arch_type MACH_TYPE_MXC27530EVB - # endif --# define machine_is_scma11evb() (machine_arch_type == MACH_TYPE_SCMA11EVB) -+# define machine_is_mxc27530evb() (machine_arch_type == MACH_TYPE_MXC27530EVB) - #else --# define machine_is_scma11evb() (0) -+# define machine_is_mxc27530evb() (0) - #endif - - #ifdef CONFIG_MACH_SMDK2800 -@@ -8297,16 +8622,16 @@ - # define machine_is_hrdisplay() (0) - #endif - --#ifdef CONFIG_MACH_SCMA11BB -+#ifdef CONFIG_MACH_MXC27530ADS - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_SCMA11BB -+# define machine_arch_type MACH_TYPE_MXC27530ADS - # endif --# define machine_is_scma11bb() (machine_arch_type == MACH_TYPE_SCMA11BB) -+# define machine_is_mxc27530ads() (machine_arch_type == MACH_TYPE_MXC27530ADS) - #else --# define machine_is_scma11bb() (0) -+# define machine_is_mxc27530ads() (0) - #endif - - #ifdef CONFIG_MACH_TRIZEPS3 -@@ -9185,16 +9510,16 @@ - # define machine_is_hx2750() (0) - #endif - --#ifdef CONFIG_MACH_ZEUSEVB -+#ifdef CONFIG_MACH_MXC91131EVB - # ifdef machine_arch_type - # undef machine_arch_type - # define machine_arch_type __machine_arch_type - # else --# define machine_arch_type MACH_TYPE_ZEUSEVB -+# define machine_arch_type MACH_TYPE_MXC91131EVB - # endif --# define machine_is_zeusevb() (machine_arch_type == MACH_TYPE_ZEUSEVB) -+# define machine_is_mxc91131evb() (machine_arch_type == MACH_TYPE_MXC91131EVB) - #else --# define machine_is_zeusevb() (0) -+# define machine_is_mxc91131evb() (0) - #endif - - #ifdef CONFIG_MACH_P700 -@@ -9401,6 +9726,3906 @@ - # define machine_is_mp2usb() (0) - #endif - -+#ifdef CONFIG_MACH_NTNP425C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NTNP425C -+# endif -+# define machine_is_ntnp425c() (machine_arch_type == MACH_TYPE_NTNP425C) -+#else -+# define machine_is_ntnp425c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COLIBRI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COLIBRI -+# endif -+# define machine_is_colibri() (machine_arch_type == MACH_TYPE_COLIBRI) -+#else -+# define machine_is_colibri() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM7220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM7220 -+# endif -+# define machine_is_pcm7220() (machine_arch_type == MACH_TYPE_PCM7220) -+#else -+# define machine_is_pcm7220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GATEWAY7001 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GATEWAY7001 -+# endif -+# define machine_is_gateway7001() (machine_arch_type == MACH_TYPE_GATEWAY7001) -+#else -+# define machine_is_gateway7001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PCM027 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PCM027 -+# endif -+# define machine_is_pcm027() (machine_arch_type == MACH_TYPE_PCM027) -+#else -+# define machine_is_pcm027() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA -+# endif -+# define machine_is_cmpxa() (machine_arch_type == MACH_TYPE_CMPXA) -+#else -+# define machine_is_cmpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ANUBIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ANUBIS -+# endif -+# define machine_is_anubis() (machine_arch_type == MACH_TYPE_ANUBIS) -+#else -+# define machine_is_anubis() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ITE8152 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ITE8152 -+# endif -+# define machine_is_ite8152() (machine_arch_type == MACH_TYPE_ITE8152) -+#else -+# define machine_is_ite8152() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LPC3XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LPC3XXX -+# endif -+# define machine_is_lpc3xxx() (machine_arch_type == MACH_TYPE_LPC3XXX) -+#else -+# define machine_is_lpc3xxx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PUPPETEER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PUPPETEER -+# endif -+# define machine_is_puppeteer() (machine_arch_type == MACH_TYPE_PUPPETEER) -+#else -+# define machine_is_puppeteer() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MACH_VADATECH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MACH_VADATECH -+# endif -+# define machine_is_vt001() (machine_arch_type == MACH_TYPE_MACH_VADATECH) -+#else -+# define machine_is_vt001() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E570 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E570 -+# endif -+# define machine_is_e570() (machine_arch_type == MACH_TYPE_E570) -+#else -+# define machine_is_e570() (0) -+#endif -+ -+#ifdef CONFIG_MACH_X50 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_X50 -+# endif -+# define machine_is_x50() (machine_arch_type == MACH_TYPE_X50) -+#else -+# define machine_is_x50() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RECON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RECON -+# endif -+# define machine_is_recon() (machine_arch_type == MACH_TYPE_RECON) -+#else -+# define machine_is_recon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XBOARDGP8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XBOARDGP8 -+# endif -+# define machine_is_xboardgp8() (machine_arch_type == MACH_TYPE_XBOARDGP8) -+#else -+# define machine_is_xboardgp8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FPIC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FPIC2 -+# endif -+# define machine_is_fpic2() (machine_arch_type == MACH_TYPE_FPIC2) -+#else -+# define machine_is_fpic2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AKITA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AKITA -+# endif -+# define machine_is_akita() (machine_arch_type == MACH_TYPE_AKITA) -+#else -+# define machine_is_akita() (0) -+#endif -+ -+#ifdef CONFIG_MACH_A81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_A81 -+# endif -+# define machine_is_a81() (machine_arch_type == MACH_TYPE_A81) -+#else -+# define machine_is_a81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SVM_SC25X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SVM_SC25X -+# endif -+# define machine_is_svm_sc25x() (machine_arch_type == MACH_TYPE_SVM_SC25X) -+#else -+# define machine_is_svm_sc25x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VADATECH020 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VADATECH020 -+# endif -+# define machine_is_vt020() (machine_arch_type == MACH_TYPE_VADATECH020) -+#else -+# define machine_is_vt020() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TLI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TLI -+# endif -+# define machine_is_tli() (machine_arch_type == MACH_TYPE_TLI) -+#else -+# define machine_is_tli() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315LC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315LC -+# endif -+# define machine_is_edb9315lc() (machine_arch_type == MACH_TYPE_EDB9315LC) -+#else -+# define machine_is_edb9315lc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PASSEC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PASSEC -+# endif -+# define machine_is_passec() (machine_arch_type == MACH_TYPE_PASSEC) -+#else -+# define machine_is_passec() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS_TIGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS_TIGER -+# endif -+# define machine_is_ds_tiger() (machine_arch_type == MACH_TYPE_DS_TIGER) -+#else -+# define machine_is_ds_tiger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E310 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E310 -+# endif -+# define machine_is_e310() (machine_arch_type == MACH_TYPE_E310) -+#else -+# define machine_is_e310() (0) -+#endif -+ -+#ifdef CONFIG_MACH_E330 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_E330 -+# endif -+# define machine_is_e330() (machine_arch_type == MACH_TYPE_E330) -+#else -+# define machine_is_e330() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RT3000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RT3000 -+# endif -+# define machine_is_rt3000() (machine_arch_type == MACH_TYPE_RT3000) -+#else -+# define machine_is_rt3000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NOKIA770 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NOKIA770 -+# endif -+# define machine_is_nokia770() (machine_arch_type == MACH_TYPE_NOKIA770) -+#else -+# define machine_is_nokia770() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX0106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX0106 -+# endif -+# define machine_is_pnx0106() (machine_arch_type == MACH_TYPE_PNX0106) -+#else -+# define machine_is_pnx0106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HX21XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HX21XX -+# endif -+# define machine_is_hx21xx() (machine_arch_type == MACH_TYPE_HX21XX) -+#else -+# define machine_is_hx21xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FARADAY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FARADAY -+# endif -+# define machine_is_faraday() (machine_arch_type == MACH_TYPE_FARADAY) -+#else -+# define machine_is_faraday() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC9312 -+# endif -+# define machine_is_sbc9312() (machine_arch_type == MACH_TYPE_SBC9312) -+#else -+# define machine_is_sbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BATMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BATMAN -+# endif -+# define machine_is_batman() (machine_arch_type == MACH_TYPE_BATMAN) -+#else -+# define machine_is_batman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JPD201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JPD201 -+# endif -+# define machine_is_jpd201() (machine_arch_type == MACH_TYPE_JPD201) -+#else -+# define machine_is_jpd201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIPSA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIPSA -+# endif -+# define machine_is_mipsa() (machine_arch_type == MACH_TYPE_MIPSA) -+#else -+# define machine_is_mipsa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KACOM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KACOM -+# endif -+# define machine_is_kacom() (machine_arch_type == MACH_TYPE_KACOM) -+#else -+# define machine_is_kacom() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCOCPU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCOCPU -+# endif -+# define machine_is_swarcocpu() (machine_arch_type == MACH_TYPE_SWARCOCPU) -+#else -+# define machine_is_swarcocpu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SWARCODSL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SWARCODSL -+# endif -+# define machine_is_swarcodsl() (machine_arch_type == MACH_TYPE_SWARCODSL) -+#else -+# define machine_is_swarcodsl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BLUEANGEL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BLUEANGEL -+# endif -+# define machine_is_blueangel() (machine_arch_type == MACH_TYPE_BLUEANGEL) -+#else -+# define machine_is_blueangel() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HAIRYGRAMA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HAIRYGRAMA -+# endif -+# define machine_is_hairygrama() (machine_arch_type == MACH_TYPE_HAIRYGRAMA) -+#else -+# define machine_is_hairygrama() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BANFF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BANFF -+# endif -+# define machine_is_banff() (machine_arch_type == MACH_TYPE_BANFF) -+#else -+# define machine_is_banff() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARMEVA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARMEVA -+# endif -+# define machine_is_carmeva() (machine_arch_type == MACH_TYPE_CARMEVA) -+#else -+# define machine_is_carmeva() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAM255 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAM255 -+# endif -+# define machine_is_sam255() (machine_arch_type == MACH_TYPE_SAM255) -+#else -+# define machine_is_sam255() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PPM10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PPM10 -+# endif -+# define machine_is_ppm10() (machine_arch_type == MACH_TYPE_PPM10) -+#else -+# define machine_is_ppm10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDB9315A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDB9315A -+# endif -+# define machine_is_edb9315a() (machine_arch_type == MACH_TYPE_EDB9315A) -+#else -+# define machine_is_edb9315a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SUNSET -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SUNSET -+# endif -+# define machine_is_sunset() (machine_arch_type == MACH_TYPE_SUNSET) -+#else -+# define machine_is_sunset() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STARGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STARGATE2 -+# endif -+# define machine_is_stargate2() (machine_arch_type == MACH_TYPE_STARGATE2) -+#else -+# define machine_is_stargate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_INTELMOTE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_INTELMOTE2 -+# endif -+# define machine_is_intelmote2() (machine_arch_type == MACH_TYPE_INTELMOTE2) -+#else -+# define machine_is_intelmote2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TRIZEPS4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TRIZEPS4 -+# endif -+# define machine_is_trizeps4() (machine_arch_type == MACH_TYPE_TRIZEPS4) -+#else -+# define machine_is_trizeps4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAINSTONE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAINSTONE2 -+# endif -+# define machine_is_mainstone2() (machine_arch_type == MACH_TYPE_MAINSTONE2) -+#else -+# define machine_is_mainstone2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_IXP42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_IXP42X -+# endif -+# define machine_is_ez_ixp42x() (machine_arch_type == MACH_TYPE_EZ_IXP42X) -+#else -+# define machine_is_ez_ixp42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TAPWAVE_ZODIAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TAPWAVE_ZODIAC -+# endif -+# define machine_is_tapwave_zodiac() (machine_arch_type == MACH_TYPE_TAPWAVE_ZODIAC) -+#else -+# define machine_is_tapwave_zodiac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UNIVERSALMETER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UNIVERSALMETER -+# endif -+# define machine_is_universalmeter() (machine_arch_type == MACH_TYPE_UNIVERSALMETER) -+#else -+# define machine_is_universalmeter() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HICOARM9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HICOARM9 -+# endif -+# define machine_is_hicoarm9() (machine_arch_type == MACH_TYPE_HICOARM9) -+#else -+# define machine_is_hicoarm9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4008 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4008 -+# endif -+# define machine_is_pnx4008() (machine_arch_type == MACH_TYPE_PNX4008) -+#else -+# define machine_is_pnx4008() (0) -+#endif -+ -+#ifdef CONFIG_MACH_KWS6000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_KWS6000 -+# endif -+# define machine_is_kws6000() (machine_arch_type == MACH_TYPE_KWS6000) -+#else -+# define machine_is_kws6000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PORTUX920T -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PORTUX920T -+# endif -+# define machine_is_portux920t() (machine_arch_type == MACH_TYPE_PORTUX920T) -+#else -+# define machine_is_portux920t() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZ_X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZ_X5 -+# endif -+# define machine_is_ez_x5() (machine_arch_type == MACH_TYPE_EZ_X5) -+#else -+# define machine_is_ez_x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_RUDOLPH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_RUDOLPH -+# endif -+# define machine_is_omap_rudolph() (machine_arch_type == MACH_TYPE_OMAP_RUDOLPH) -+#else -+# define machine_is_omap_rudolph() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPUAT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPUAT91 -+# endif -+# define machine_is_cpuat91() (machine_arch_type == MACH_TYPE_CPUAT91) -+#else -+# define machine_is_cpuat91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA9200 -+# endif -+# define machine_is_rea9200() (machine_arch_type == MACH_TYPE_REA9200) -+#else -+# define machine_is_rea9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACTS_PUNE_SA1110 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACTS_PUNE_SA1110 -+# endif -+# define machine_is_acts_pune_sa1110() (machine_arch_type == MACH_TYPE_ACTS_PUNE_SA1110) -+#else -+# define machine_is_acts_pune_sa1110() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP425 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP425 -+# endif -+# define machine_is_ixp425() (machine_arch_type == MACH_TYPE_IXP425) -+#else -+# define machine_is_ixp425() (0) -+#endif -+ -+#ifdef CONFIG_MACH_I30030ADS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_I30030ADS -+# endif -+# define machine_is_i30030ads() (machine_arch_type == MACH_TYPE_I30030ADS) -+#else -+# define machine_is_i30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PERCH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PERCH -+# endif -+# define machine_is_perch() (machine_arch_type == MACH_TYPE_PERCH) -+#else -+# define machine_is_perch() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EIS05R1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EIS05R1 -+# endif -+# define machine_is_eis05r1() (machine_arch_type == MACH_TYPE_EIS05R1) -+#else -+# define machine_is_eis05r1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PEPPERPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PEPPERPAD -+# endif -+# define machine_is_pepperpad() (machine_arch_type == MACH_TYPE_PEPPERPAD) -+#else -+# define machine_is_pepperpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SB3010 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SB3010 -+# endif -+# define machine_is_sb3010() (machine_arch_type == MACH_TYPE_SB3010) -+#else -+# define machine_is_sb3010() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RM9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RM9200 -+# endif -+# define machine_is_rm9200() (machine_arch_type == MACH_TYPE_RM9200) -+#else -+# define machine_is_rm9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DMA03 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DMA03 -+# endif -+# define machine_is_dma03() (machine_arch_type == MACH_TYPE_DMA03) -+#else -+# define machine_is_dma03() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROAD_S101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROAD_S101 -+# endif -+# define machine_is_road_s101() (machine_arch_type == MACH_TYPE_ROAD_S101) -+#else -+# define machine_is_road_s101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_A -+# endif -+# define machine_is_iq_nextgen_a() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_A) -+#else -+# define machine_is_iq_nextgen_a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_B -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_B -+# endif -+# define machine_is_iq_nextgen_b() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_B) -+#else -+# define machine_is_iq_nextgen_b() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_C -+# endif -+# define machine_is_iq_nextgen_c() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_C) -+#else -+# define machine_is_iq_nextgen_c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_D -+# endif -+# define machine_is_iq_nextgen_d() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_D) -+#else -+# define machine_is_iq_nextgen_d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ_NEXTGEN_E -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ_NEXTGEN_E -+# endif -+# define machine_is_iq_nextgen_e() (machine_arch_type == MACH_TYPE_IQ_NEXTGEN_E) -+#else -+# define machine_is_iq_nextgen_e() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MALLOW_AT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MALLOW_AT91 -+# endif -+# define machine_is_mallow_at91() (machine_arch_type == MACH_TYPE_MALLOW_AT91) -+#else -+# define machine_is_mallow_at91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_I -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_I -+# endif -+# define machine_is_cybertracker_i() (machine_arch_type == MACH_TYPE_CYBERTRACKER_I) -+#else -+# define machine_is_cybertracker_i() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC931X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC931X -+# endif -+# define machine_is_gesbc931x() (machine_arch_type == MACH_TYPE_GESBC931X) -+#else -+# define machine_is_gesbc931x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CENTIPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CENTIPAD -+# endif -+# define machine_is_centipad() (machine_arch_type == MACH_TYPE_CENTIPAD) -+#else -+# define machine_is_centipad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARMSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARMSOC -+# endif -+# define machine_is_armsoc() (machine_arch_type == MACH_TYPE_ARMSOC) -+#else -+# define machine_is_armsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SE4200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SE4200 -+# endif -+# define machine_is_se4200() (machine_arch_type == MACH_TYPE_SE4200) -+#else -+# define machine_is_se4200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMS197A -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMS197A -+# endif -+# define machine_is_ems197a() (machine_arch_type == MACH_TYPE_EMS197A) -+#else -+# define machine_is_ems197a() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9 -+# endif -+# define machine_is_micro9() (machine_arch_type == MACH_TYPE_MICRO9) -+#else -+# define machine_is_micro9() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MICRO9L -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MICRO9L -+# endif -+# define machine_is_micro9l() (machine_arch_type == MACH_TYPE_MICRO9L) -+#else -+# define machine_is_micro9l() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UC5471DSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UC5471DSP -+# endif -+# define machine_is_uc5471dsp() (machine_arch_type == MACH_TYPE_UC5471DSP) -+#else -+# define machine_is_uc5471dsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SJ5471ENG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SJ5471ENG -+# endif -+# define machine_is_sj5471eng() (machine_arch_type == MACH_TYPE_SJ5471ENG) -+#else -+# define machine_is_sj5471eng() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CMPXA26X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CMPXA26X -+# endif -+# define machine_is_none() (machine_arch_type == MACH_TYPE_CMPXA26X) -+#else -+# define machine_is_none() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NC -+# endif -+# define machine_is_nc1() (machine_arch_type == MACH_TYPE_NC) -+#else -+# define machine_is_nc1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTE -+# endif -+# define machine_is_omap_palmte() (machine_arch_type == MACH_TYPE_OMAP_PALMTE) -+#else -+# define machine_is_omap_palmte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AJAX52X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AJAX52X -+# endif -+# define machine_is_ajax52x() (machine_arch_type == MACH_TYPE_AJAX52X) -+#else -+# define machine_is_ajax52x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIRIUSTAR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIRIUSTAR -+# endif -+# define machine_is_siriustar() (machine_arch_type == MACH_TYPE_SIRIUSTAR) -+#else -+# define machine_is_siriustar() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IODATA_HDLG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IODATA_HDLG -+# endif -+# define machine_is_iodata_hdlg() (machine_arch_type == MACH_TYPE_IODATA_HDLG) -+#else -+# define machine_is_iodata_hdlg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200UTL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200UTL -+# endif -+# define machine_is_at91rm9200utl() (machine_arch_type == MACH_TYPE_AT91RM9200UTL) -+#else -+# define machine_is_at91rm9200utl() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BIOSAFE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BIOSAFE -+# endif -+# define machine_is_biosafe() (machine_arch_type == MACH_TYPE_BIOSAFE) -+#else -+# define machine_is_biosafe() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MP1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MP1000 -+# endif -+# define machine_is_mp1000() (machine_arch_type == MACH_TYPE_MP1000) -+#else -+# define machine_is_mp1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PARSY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PARSY -+# endif -+# define machine_is_parsy() (machine_arch_type == MACH_TYPE_PARSY) -+#else -+# define machine_is_parsy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCXP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCXP -+# endif -+# define machine_is_ccxp270() (machine_arch_type == MACH_TYPE_CCXP) -+#else -+# define machine_is_ccxp270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_GSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_GSAMPLE -+# endif -+# define machine_is_omap_gsample() (machine_arch_type == MACH_TYPE_OMAP_GSAMPLE) -+#else -+# define machine_is_omap_gsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REALVIEW_EB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REALVIEW_EB -+# endif -+# define machine_is_realview_eb() (machine_arch_type == MACH_TYPE_REALVIEW_EB) -+#else -+# define machine_is_realview_eb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMOA -+# endif -+# define machine_is_samoa() (machine_arch_type == MACH_TYPE_SAMOA) -+#else -+# define machine_is_samoa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_T3XSCALE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_T3XSCALE -+# endif -+# define machine_is_t3xscale() (machine_arch_type == MACH_TYPE_T3XSCALE) -+#else -+# define machine_is_t3xscale() (0) -+#endif -+ -+#ifdef CONFIG_MACH_I878 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_I878 -+# endif -+# define machine_is_i878() (machine_arch_type == MACH_TYPE_I878) -+#else -+# define machine_is_i878() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BORZOI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BORZOI -+# endif -+# define machine_is_borzoi() (machine_arch_type == MACH_TYPE_BORZOI) -+#else -+# define machine_is_borzoi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GECKO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GECKO -+# endif -+# define machine_is_gecko() (machine_arch_type == MACH_TYPE_GECKO) -+#else -+# define machine_is_gecko() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101 -+# endif -+# define machine_is_ds101() (machine_arch_type == MACH_TYPE_DS101) -+#else -+# define machine_is_ds101() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT2 -+# endif -+# define machine_is_omap_palmtt2() (machine_arch_type == MACH_TYPE_OMAP_PALMTT2) -+#else -+# define machine_is_omap_palmtt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMLD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMLD -+# endif -+# define machine_is_xscale_palmld() (machine_arch_type == MACH_TYPE_XSCALE_PALMLD) -+#else -+# define machine_is_xscale_palmld() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC9C -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC9C -+# endif -+# define machine_is_cc9c() (machine_arch_type == MACH_TYPE_CC9C) -+#else -+# define machine_is_cc9c() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SBC1670 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SBC1670 -+# endif -+# define machine_is_sbc1670() (machine_arch_type == MACH_TYPE_SBC1670) -+#else -+# define machine_is_sbc1670() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP28X5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP28X5 -+# endif -+# define machine_is_ixdp28x5() (machine_arch_type == MACH_TYPE_IXDP28X5) -+#else -+# define machine_is_ixdp28x5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTT -+# endif -+# define machine_is_omap_palmtt() (machine_arch_type == MACH_TYPE_OMAP_PALMTT) -+#else -+# define machine_is_omap_palmtt() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML696K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML696K -+# endif -+# define machine_is_ml696k() (machine_arch_type == MACH_TYPE_ML696K) -+#else -+# define machine_is_ml696k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ARCOM_ZEUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ARCOM_ZEUS -+# endif -+# define machine_is_arcom_zeus() (machine_arch_type == MACH_TYPE_ARCOM_ZEUS) -+#else -+# define machine_is_arcom_zeus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OSIRIS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OSIRIS -+# endif -+# define machine_is_osiris() (machine_arch_type == MACH_TYPE_OSIRIS) -+#else -+# define machine_is_osiris() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAESTRO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAESTRO -+# endif -+# define machine_is_maestro() (machine_arch_type == MACH_TYPE_MAESTRO) -+#else -+# define machine_is_maestro() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TUNGE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TUNGE2 -+# endif -+# define machine_is_tunge2() (machine_arch_type == MACH_TYPE_TUNGE2) -+#else -+# define machine_is_tunge2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXBBM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXBBM -+# endif -+# define machine_is_ixbbm() (machine_arch_type == MACH_TYPE_IXBBM) -+#else -+# define machine_is_ixbbm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX27 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX27 -+# endif -+# define machine_is_mx27ads() (machine_arch_type == MACH_TYPE_MX27) -+#else -+# define machine_is_mx27ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AX8004 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AX8004 -+# endif -+# define machine_is_ax8004() (machine_arch_type == MACH_TYPE_AX8004) -+#else -+# define machine_is_ax8004() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91SAM9261EK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91SAM9261EK -+# endif -+# define machine_is_at91sam9261ek() (machine_arch_type == MACH_TYPE_AT91SAM9261EK) -+#else -+# define machine_is_at91sam9261ek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOFT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOFT -+# endif -+# define machine_is_loft() (machine_arch_type == MACH_TYPE_LOFT) -+#else -+# define machine_is_loft() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGPIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGPIE -+# endif -+# define machine_is_magpie() (machine_arch_type == MACH_TYPE_MAGPIE) -+#else -+# define machine_is_magpie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21 -+# endif -+# define machine_is_mx21ads() (machine_arch_type == MACH_TYPE_MX21) -+#else -+# define machine_is_mx21ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MB87M3400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MB87M3400 -+# endif -+# define machine_is_mb87m3400() (machine_arch_type == MACH_TYPE_MB87M3400) -+#else -+# define machine_is_mb87m3400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MGUARD_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MGUARD_DELTA -+# endif -+# define machine_is_mguard_delta() (machine_arch_type == MACH_TYPE_MGUARD_DELTA) -+#else -+# define machine_is_mguard_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_DVDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_DVDP -+# endif -+# define machine_is_davinci_dvdp() (machine_arch_type == MACH_TYPE_DAVINCI_DVDP) -+#else -+# define machine_is_davinci_dvdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCUNIVERSAL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCUNIVERSAL -+# endif -+# define machine_is_htcuniversal() (machine_arch_type == MACH_TYPE_HTCUNIVERSAL) -+#else -+# define machine_is_htcuniversal() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPAD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPAD -+# endif -+# define machine_is_tpad() (machine_arch_type == MACH_TYPE_TPAD) -+#else -+# define machine_is_tpad() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ROVERP3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ROVERP3 -+# endif -+# define machine_is_roverp3() (machine_arch_type == MACH_TYPE_ROVERP3) -+#else -+# define machine_is_roverp3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JORNADA928 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JORNADA928 -+# endif -+# define machine_is_jornada928() (machine_arch_type == MACH_TYPE_JORNADA928) -+#else -+# define machine_is_jornada928() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MV88FXX81 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MV88FXX81 -+# endif -+# define machine_is_mv88fxx81() (machine_arch_type == MACH_TYPE_MV88FXX81) -+#else -+# define machine_is_mv88fxx81() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STMP36XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STMP36XX -+# endif -+# define machine_is_stmp36xx() (machine_arch_type == MACH_TYPE_STMP36XX) -+#else -+# define machine_is_stmp36xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SXNI79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SXNI79524 -+# endif -+# define machine_is_sxni79524() (machine_arch_type == MACH_TYPE_SXNI79524) -+#else -+# define machine_is_sxni79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AMS_DELTA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AMS_DELTA -+# endif -+# define machine_is_ams_delta() (machine_arch_type == MACH_TYPE_AMS_DELTA) -+#else -+# define machine_is_ams_delta() (0) -+#endif -+ -+#ifdef CONFIG_MACH_URANIUM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_URANIUM -+# endif -+# define machine_is_uranium() (machine_arch_type == MACH_TYPE_URANIUM) -+#else -+# define machine_is_uranium() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UCON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UCON -+# endif -+# define machine_is_ucon() (machine_arch_type == MACH_TYPE_UCON) -+#else -+# define machine_is_ucon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NAS100D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NAS100D -+# endif -+# define machine_is_nas100d() (machine_arch_type == MACH_TYPE_NAS100D) -+#else -+# define machine_is_nas100d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_L083_1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_L083_1000 -+# endif -+# define machine_is_l083() (machine_arch_type == MACH_TYPE_L083_1000) -+#else -+# define machine_is_l083() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EZX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EZX -+# endif -+# define machine_is_ezx() (machine_arch_type == MACH_TYPE_EZX) -+#else -+# define machine_is_ezx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX5220 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX5220 -+# endif -+# define machine_is_pnx5220() (machine_arch_type == MACH_TYPE_PNX5220) -+#else -+# define machine_is_pnx5220() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BUTTE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BUTTE -+# endif -+# define machine_is_butte() (machine_arch_type == MACH_TYPE_BUTTE) -+#else -+# define machine_is_butte() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SRM2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SRM2 -+# endif -+# define machine_is_srm2() (machine_arch_type == MACH_TYPE_SRM2) -+#else -+# define machine_is_srm2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSBR -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSBR -+# endif -+# define machine_is_dsbr() (machine_arch_type == MACH_TYPE_DSBR) -+#else -+# define machine_is_dsbr() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CRYSTALBALL -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CRYSTALBALL -+# endif -+# define machine_is_crystalball() (machine_arch_type == MACH_TYPE_CRYSTALBALL) -+#else -+# define machine_is_crystalball() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TINYPXA27X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TINYPXA27X -+# endif -+# define machine_is_tinypxa27x() (machine_arch_type == MACH_TYPE_TINYPXA27X) -+#else -+# define machine_is_tinypxa27x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HERBIE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HERBIE -+# endif -+# define machine_is_herbie() (machine_arch_type == MACH_TYPE_HERBIE) -+#else -+# define machine_is_herbie() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAGICIAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAGICIAN -+# endif -+# define machine_is_magician() (machine_arch_type == MACH_TYPE_MAGICIAN) -+#else -+# define machine_is_magician() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM4002 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM4002 -+# endif -+# define machine_is_cm4002() (machine_arch_type == MACH_TYPE_CM4002) -+#else -+# define machine_is_cm4002() (0) -+#endif -+ -+#ifdef CONFIG_MACH_B4 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_B4 -+# endif -+# define machine_is_b4() (machine_arch_type == MACH_TYPE_B4) -+#else -+# define machine_is_b4() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAUI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAUI -+# endif -+# define machine_is_maui() (machine_arch_type == MACH_TYPE_MAUI) -+#else -+# define machine_is_maui() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CYBERTRACKER_G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CYBERTRACKER_G -+# endif -+# define machine_is_cybertracker_g() (machine_arch_type == MACH_TYPE_CYBERTRACKER_G) -+#else -+# define machine_is_cybertracker_g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDKN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDKN -+# endif -+# define machine_is_nxdkn() (machine_arch_type == MACH_TYPE_NXDKN) -+#else -+# define machine_is_nxdkn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MIO8390 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MIO8390 -+# endif -+# define machine_is_mio8390() (machine_arch_type == MACH_TYPE_MIO8390) -+#else -+# define machine_is_mio8390() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMI_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMI_BOARD -+# endif -+# define machine_is_omi_board() (machine_arch_type == MACH_TYPE_OMI_BOARD) -+#else -+# define machine_is_omi_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX21CIV -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX21CIV -+# endif -+# define machine_is_mx21civ() (machine_arch_type == MACH_TYPE_MX21CIV) -+#else -+# define machine_is_mx21civ() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MAHI_CDAC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MAHI_CDAC -+# endif -+# define machine_is_mahi_cdac() (machine_arch_type == MACH_TYPE_MAHI_CDAC) -+#else -+# define machine_is_mahi_cdac() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTX -+# endif -+# define machine_is_xscale_palmtx() (machine_arch_type == MACH_TYPE_XSCALE_PALMTX) -+#else -+# define machine_is_xscale_palmtx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2413 -+# endif -+# define machine_is_s3c2413() (machine_arch_type == MACH_TYPE_S3C2413) -+#else -+# define machine_is_s3c2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SAMSYS_EP0 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SAMSYS_EP0 -+# endif -+# define machine_is_samsys_ep0() (machine_arch_type == MACH_TYPE_SAMSYS_EP0) -+#else -+# define machine_is_samsys_ep0() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V1 -+# endif -+# define machine_is_wg302v1() (machine_arch_type == MACH_TYPE_WG302V1) -+#else -+# define machine_is_wg302v1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WG302V2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WG302V2 -+# endif -+# define machine_is_wg302v2() (machine_arch_type == MACH_TYPE_WG302V2) -+#else -+# define machine_is_wg302v2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EB42X -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EB42X -+# endif -+# define machine_is_eb42x() (machine_arch_type == MACH_TYPE_EB42X) -+#else -+# define machine_is_eb42x() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IQ331ES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IQ331ES -+# endif -+# define machine_is_iq331es() (machine_arch_type == MACH_TYPE_IQ331ES) -+#else -+# define machine_is_iq331es() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COSYDSP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COSYDSP -+# endif -+# define machine_is_cosydsp() (machine_arch_type == MACH_TYPE_COSYDSP) -+#else -+# define machine_is_cosydsp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_UPLAT7D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_UPLAT7D -+# endif -+# define machine_is_uplat7d_proto() (machine_arch_type == MACH_TYPE_UPLAT7D) -+#else -+# define machine_is_uplat7d_proto() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTDAVINCI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTDAVINCI -+# endif -+# define machine_is_ptdavinci() (machine_arch_type == MACH_TYPE_PTDAVINCI) -+#else -+# define machine_is_ptdavinci() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MBUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MBUS -+# endif -+# define machine_is_mbus() (machine_arch_type == MACH_TYPE_MBUS) -+#else -+# define machine_is_mbus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NADIA2VB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NADIA2VB -+# endif -+# define machine_is_nadia2vb() (machine_arch_type == MACH_TYPE_NADIA2VB) -+#else -+# define machine_is_nadia2vb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_R1000 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_R1000 -+# endif -+# define machine_is_r1000() (machine_arch_type == MACH_TYPE_R1000) -+#else -+# define machine_is_r1000() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW90250 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW90250 -+# endif -+# define machine_is_hw90250() (machine_arch_type == MACH_TYPE_HW90250) -+#else -+# define machine_is_hw90250() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_2430SDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_2430SDP -+# endif -+# define machine_is_omap_2430sdp() (machine_arch_type == MACH_TYPE_OMAP_2430SDP) -+#else -+# define machine_is_omap_2430sdp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DAVINCI_EVM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DAVINCI_EVM -+# endif -+# define machine_is_davinci_evm() (machine_arch_type == MACH_TYPE_DAVINCI_EVM) -+#else -+# define machine_is_davinci_evm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TORNADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TORNADO -+# endif -+# define machine_is_omap_tornado() (machine_arch_type == MACH_TYPE_OMAP_TORNADO) -+#else -+# define machine_is_omap_tornado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OLOCREEK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OLOCREEK -+# endif -+# define machine_is_olocreek() (machine_arch_type == MACH_TYPE_OLOCREEK) -+#else -+# define machine_is_olocreek() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PALMZ72 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PALMZ72 -+# endif -+# define machine_is_palmz72() (machine_arch_type == MACH_TYPE_PALMZ72) -+#else -+# define machine_is_palmz72() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXDB500 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXDB500 -+# endif -+# define machine_is_nxdb500() (machine_arch_type == MACH_TYPE_NXDB500) -+#else -+# define machine_is_nxdb500() (0) -+#endif -+ -+#ifdef CONFIG_MACH_APF9328 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_APF9328 -+# endif -+# define machine_is_apf9328() (machine_arch_type == MACH_TYPE_APF9328) -+#else -+# define machine_is_apf9328() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_WIPOQ -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_WIPOQ -+# endif -+# define machine_is_omap_wipoq() (machine_arch_type == MACH_TYPE_OMAP_WIPOQ) -+#else -+# define machine_is_omap_wipoq() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_TWIP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_TWIP -+# endif -+# define machine_is_omap_twip() (machine_arch_type == MACH_TYPE_OMAP_TWIP) -+#else -+# define machine_is_omap_twip() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTREO650 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTREO650 -+# endif -+# define machine_is_xscale_treo650() (machine_arch_type == MACH_TYPE_XSCALE_PALMTREO650) -+#else -+# define machine_is_xscale_treo650() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACUMEN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACUMEN -+# endif -+# define machine_is_acumen() (machine_arch_type == MACH_TYPE_ACUMEN) -+#else -+# define machine_is_acumen() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XP100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XP100 -+# endif -+# define machine_is_xp100() (machine_arch_type == MACH_TYPE_XP100) -+#else -+# define machine_is_xp100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FS2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FS2410 -+# endif -+# define machine_is_fs2410() (machine_arch_type == MACH_TYPE_FS2410) -+#else -+# define machine_is_fs2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA270_CERF -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA270_CERF -+# endif -+# define machine_is_pxa270_cerf() (machine_arch_type == MACH_TYPE_PXA270_CERF) -+#else -+# define machine_is_pxa270_cerf() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SQ2FTLPALM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SQ2FTLPALM -+# endif -+# define machine_is_sq2ftlpalm() (machine_arch_type == MACH_TYPE_SQ2FTLPALM) -+#else -+# define machine_is_sq2ftlpalm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BSEMSERVER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BSEMSERVER -+# endif -+# define machine_is_bsemserver() (machine_arch_type == MACH_TYPE_BSEMSERVER) -+#else -+# define machine_is_bsemserver() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETCLIENT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETCLIENT -+# endif -+# define machine_is_netclient() (machine_arch_type == MACH_TYPE_NETCLIENT) -+#else -+# define machine_is_netclient() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSCALE_PALMTT5 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSCALE_PALMTT5 -+# endif -+# define machine_is_xscale_palmtt5() (machine_arch_type == MACH_TYPE_XSCALE_PALMTT5) -+#else -+# define machine_is_xscale_palmtt5() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMTC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMTC -+# endif -+# define machine_is_xscale_palmtc() (machine_arch_type == MACH_TYPE_OMAP_PALMTC) -+#else -+# define machine_is_xscale_palmtc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_APOLLON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_APOLLON -+# endif -+# define machine_is_omap_apollon() (machine_arch_type == MACH_TYPE_OMAP_APOLLON) -+#else -+# define machine_is_omap_apollon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MXC30030EVB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MXC30030EVB -+# endif -+# define machine_is_mxc30030evb() (machine_arch_type == MACH_TYPE_MXC30030EVB) -+#else -+# define machine_is_mxc30030evb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REA_2D -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REA_2D -+# endif -+# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) -+#else -+# define machine_is_rea_2d() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TI3E524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TI3E524 -+# endif -+# define machine_is_eti3e524() (machine_arch_type == MACH_TYPE_TI3E524) -+#else -+# define machine_is_eti3e524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATEB9200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATEB9200 -+# endif -+# define machine_is_ateb9200() (machine_arch_type == MACH_TYPE_ATEB9200) -+#else -+# define machine_is_ateb9200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AUCKLAND -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AUCKLAND -+# endif -+# define machine_is_auckland() (machine_arch_type == MACH_TYPE_AUCKLAND) -+#else -+# define machine_is_auckland() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AK3320M -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AK3320M -+# endif -+# define machine_is_ak3220m() (machine_arch_type == MACH_TYPE_AK3320M) -+#else -+# define machine_is_ak3220m() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DURAMAX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DURAMAX -+# endif -+# define machine_is_duramax() (machine_arch_type == MACH_TYPE_DURAMAX) -+#else -+# define machine_is_duramax() (0) -+#endif -+ -+#ifdef CONFIG_MACH_N35 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_N35 -+# endif -+# define machine_is_n35() (machine_arch_type == MACH_TYPE_N35) -+#else -+# define machine_is_n35() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PRONGHORN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PRONGHORN -+# endif -+# define machine_is_pronghorn() (machine_arch_type == MACH_TYPE_PRONGHORN) -+#else -+# define machine_is_pronghorn() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUNDY -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUNDY -+# endif -+# define machine_is_fundy() (machine_arch_type == MACH_TYPE_FUNDY) -+#else -+# define machine_is_fundy() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LOGICPD_PXA270 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LOGICPD_PXA270 -+# endif -+# define machine_is_logicpd_pxa270() (machine_arch_type == MACH_TYPE_LOGICPD_PXA270) -+#else -+# define machine_is_logicpd_pxa270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CPU777 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CPU777 -+# endif -+# define machine_is_cpu777() (machine_arch_type == MACH_TYPE_CPU777) -+#else -+# define machine_is_cpu777() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIMICON9201 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIMICON9201 -+# endif -+# define machine_is_simicon9201() (machine_arch_type == MACH_TYPE_SIMICON9201) -+#else -+# define machine_is_simicon9201() (0) -+#endif -+ -+#ifdef CONFIG_MACH_LEAP2_HPM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_LEAP2_HPM -+# endif -+# define machine_is_leap2_hpm() (machine_arch_type == MACH_TYPE_LEAP2_HPM) -+#else -+# define machine_is_leap2_hpm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM922TXA10 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM922TXA10 -+# endif -+# define machine_is_cm922txa10() (machine_arch_type == MACH_TYPE_CM922TXA10) -+#else -+# define machine_is_cm922txa10() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA -+# endif -+# define machine_is_sandgate() (machine_arch_type == MACH_TYPE_PXA) -+#else -+# define machine_is_sandgate() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2 -+# endif -+# define machine_is_sandgate2() (machine_arch_type == MACH_TYPE_SANDGATE2) -+#else -+# define machine_is_sandgate2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2G -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2G -+# endif -+# define machine_is_sandgate2g() (machine_arch_type == MACH_TYPE_SANDGATE2G) -+#else -+# define machine_is_sandgate2g() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE2P -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE2P -+# endif -+# define machine_is_sandgate2p() (machine_arch_type == MACH_TYPE_SANDGATE2P) -+#else -+# define machine_is_sandgate2p() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FRED_JACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FRED_JACK -+# endif -+# define machine_is_fred_jack() (machine_arch_type == MACH_TYPE_FRED_JACK) -+#else -+# define machine_is_fred_jack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TTG_COLOR1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TTG_COLOR1 -+# endif -+# define machine_is_ttg_color1() (machine_arch_type == MACH_TYPE_TTG_COLOR1) -+#else -+# define machine_is_ttg_color1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NXEB500HMI -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NXEB500HMI -+# endif -+# define machine_is_nxeb500hmi() (machine_arch_type == MACH_TYPE_NXEB500HMI) -+#else -+# define machine_is_nxeb500hmi() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NETDCU8 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NETDCU8 -+# endif -+# define machine_is_netdcu8() (machine_arch_type == MACH_TYPE_NETDCU8) -+#else -+# define machine_is_netdcu8() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ML675050_CPU_BOA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ML675050_CPU_BOA -+# endif -+# define machine_is_ml675050_cpu_boa() (machine_arch_type == MACH_TYPE_ML675050_CPU_BOA) -+#else -+# define machine_is_ml675050_cpu_boa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVX538 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVX538 -+# endif -+# define machine_is_ng_fvx538() (machine_arch_type == MACH_TYPE_NG_FVX538) -+#else -+# define machine_is_ng_fvx538() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NG_FVS338 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NG_FVS338 -+# endif -+# define machine_is_ng_fvs338() (machine_arch_type == MACH_TYPE_NG_FVS338) -+#else -+# define machine_is_ng_fvs338() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PNX4103 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PNX4103 -+# endif -+# define machine_is_pnx4103() (machine_arch_type == MACH_TYPE_PNX4103) -+#else -+# define machine_is_pnx4103() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HESDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HESDB -+# endif -+# define machine_is_hesdb() (machine_arch_type == MACH_TYPE_HESDB) -+#else -+# define machine_is_hesdb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_XSILO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_XSILO -+# endif -+# define machine_is_xsilo() (machine_arch_type == MACH_TYPE_XSILO) -+#else -+# define machine_is_xsilo() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESPRESSO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESPRESSO -+# endif -+# define machine_is_espresso() (machine_arch_type == MACH_TYPE_ESPRESSO) -+#else -+# define machine_is_espresso() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMLC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMLC -+# endif -+# define machine_is_emlc() (machine_arch_type == MACH_TYPE_EMLC) -+#else -+# define machine_is_emlc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SISTERON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SISTERON -+# endif -+# define machine_is_sisteron() (machine_arch_type == MACH_TYPE_SISTERON) -+#else -+# define machine_is_sisteron() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RX1950 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RX1950 -+# endif -+# define machine_is_rx1950() (machine_arch_type == MACH_TYPE_RX1950) -+#else -+# define machine_is_rx1950() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TSC_VENUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TSC_VENUS -+# endif -+# define machine_is_tsc_venus() (machine_arch_type == MACH_TYPE_TSC_VENUS) -+#else -+# define machine_is_tsc_venus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DS101J -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DS101J -+# endif -+# define machine_is_ds101j() (machine_arch_type == MACH_TYPE_DS101J) -+#else -+# define machine_is_ds101j() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MXC30030ADS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MXC30030ADS -+# endif -+# define machine_is_mxc30030ads() (machine_arch_type == MACH_TYPE_MXC30030ADS) -+#else -+# define machine_is_mxc30030ads() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FUJITSU_WIMAXSOC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FUJITSU_WIMAXSOC -+# endif -+# define machine_is_fujitsu_wimaxsoc() (machine_arch_type == MACH_TYPE_FUJITSU_WIMAXSOC) -+#else -+# define machine_is_fujitsu_wimaxsoc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DUALPCMODEM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DUALPCMODEM -+# endif -+# define machine_is_dualpcmodem() (machine_arch_type == MACH_TYPE_DUALPCMODEM) -+#else -+# define machine_is_dualpcmodem() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GESBC9312 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GESBC9312 -+# endif -+# define machine_is_gesbc9312() (machine_arch_type == MACH_TYPE_GESBC9312) -+#else -+# define machine_is_gesbc9312() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCAPACHE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCAPACHE -+# endif -+# define machine_is_htcapache() (machine_arch_type == MACH_TYPE_HTCAPACHE) -+#else -+# define machine_is_htcapache() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXDP435 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXDP435 -+# endif -+# define machine_is_ixdp435() (machine_arch_type == MACH_TYPE_IXDP435) -+#else -+# define machine_is_ixdp435() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CATPROVT100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CATPROVT100 -+# endif -+# define machine_is_catprovt100() (machine_arch_type == MACH_TYPE_CATPROVT100) -+#else -+# define machine_is_catprovt100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX1XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX1XX -+# endif -+# define machine_is_picotux1xx() (machine_arch_type == MACH_TYPE_PICOTUX1XX) -+#else -+# define machine_is_picotux1xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOTUX2XX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOTUX2XX -+# endif -+# define machine_is_picotux2xx() (machine_arch_type == MACH_TYPE_PICOTUX2XX) -+#else -+# define machine_is_picotux2xx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DSMG600 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DSMG600 -+# endif -+# define machine_is_dsmg600() (machine_arch_type == MACH_TYPE_DSMG600) -+#else -+# define machine_is_dsmg600() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EMPC2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EMPC2 -+# endif -+# define machine_is_empc2() (machine_arch_type == MACH_TYPE_EMPC2) -+#else -+# define machine_is_empc2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VENTURA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VENTURA -+# endif -+# define machine_is_ventura() (machine_arch_type == MACH_TYPE_VENTURA) -+#else -+# define machine_is_ventura() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PHIDGET_SBC -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PHIDGET_SBC -+# endif -+# define machine_is_phidget_sbc() (machine_arch_type == MACH_TYPE_PHIDGET_SBC) -+#else -+# define machine_is_phidget_sbc() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IJ3K -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IJ3K -+# endif -+# define machine_is_ij3k() (machine_arch_type == MACH_TYPE_IJ3K) -+#else -+# define machine_is_ij3k() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PISGAH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PISGAH -+# endif -+# define machine_is_pisgah() (machine_arch_type == MACH_TYPE_PISGAH) -+#else -+# define machine_is_pisgah() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_FSAMPLE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_FSAMPLE -+# endif -+# define machine_is_omap_fsample() (machine_arch_type == MACH_TYPE_OMAP_FSAMPLE) -+#else -+# define machine_is_omap_fsample() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG720 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG720 -+# endif -+# define machine_is_sg720() (machine_arch_type == MACH_TYPE_SG720) -+#else -+# define machine_is_sg720() (0) -+#endif -+ -+#ifdef CONFIG_MACH_REDFOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_REDFOX -+# endif -+# define machine_is_redfox() (machine_arch_type == MACH_TYPE_REDFOX) -+#else -+# define machine_is_redfox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MYSH_EP9315_1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MYSH_EP9315_1 -+# endif -+# define machine_is_mysh_ep9315_1() (machine_arch_type == MACH_TYPE_MYSH_EP9315_1) -+#else -+# define machine_is_mysh_ep9315_1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TPF106 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TPF106 -+# endif -+# define machine_is_tpf106() (machine_arch_type == MACH_TYPE_TPF106) -+#else -+# define machine_is_tpf106() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AT91RM9200KG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AT91RM9200KG -+# endif -+# define machine_is_at91rm9200kg() (machine_arch_type == MACH_TYPE_AT91RM9200KG) -+#else -+# define machine_is_at91rm9200kg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SLEDB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SLEDB -+# endif -+# define machine_is_racemt2() (machine_arch_type == MACH_TYPE_SLEDB) -+#else -+# define machine_is_racemt2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ONTRACK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ONTRACK -+# endif -+# define machine_is_ontrack() (machine_arch_type == MACH_TYPE_ONTRACK) -+#else -+# define machine_is_ontrack() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PM1200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PM1200 -+# endif -+# define machine_is_pm1200() (machine_arch_type == MACH_TYPE_PM1200) -+#else -+# define machine_is_pm1200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESS24XXX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESS24XXX -+# endif -+# define machine_is_ess24562() (machine_arch_type == MACH_TYPE_ESS24XXX) -+#else -+# define machine_is_ess24562() (0) -+#endif -+ -+#ifdef CONFIG_MACH_COREMP7 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_COREMP7 -+# endif -+# define machine_is_coremp7() (machine_arch_type == MACH_TYPE_COREMP7) -+#else -+# define machine_is_coremp7() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXCODER_6446 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXCODER_6446 -+# endif -+# define machine_is_nexcoder_6446() (machine_arch_type == MACH_TYPE_NEXCODER_6446) -+#else -+# define machine_is_nexcoder_6446() (0) -+#endif -+ -+#ifdef CONFIG_MACH_STVC8380 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_STVC8380 -+# endif -+# define machine_is_stvc8380() (machine_arch_type == MACH_TYPE_STVC8380) -+#else -+# define machine_is_stvc8380() (0) -+#endif -+ -+#ifdef CONFIG_MACH_TEKLYNX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_TEKLYNX -+# endif -+# define machine_is_teklynx() (machine_arch_type == MACH_TYPE_TEKLYNX) -+#else -+# define machine_is_teklynx() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CARBONADO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CARBONADO -+# endif -+# define machine_is_carbonado() (machine_arch_type == MACH_TYPE_CARBONADO) -+#else -+# define machine_is_carbonado() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SYSMOS_MP730 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SYSMOS_MP730 -+# endif -+# define machine_is_sysmos_mp730() (machine_arch_type == MACH_TYPE_SYSMOS_MP730) -+#else -+# define machine_is_sysmos_mp730() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SNAPPER_CL15 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SNAPPER_CL15 -+# endif -+# define machine_is_snapper_cl15() (machine_arch_type == MACH_TYPE_SNAPPER_CL15) -+#else -+# define machine_is_snapper_cl15() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PGIGIM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PGIGIM -+# endif -+# define machine_is_pgigim() (machine_arch_type == MACH_TYPE_PGIGIM) -+#else -+# define machine_is_pgigim() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PTX9160P2 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PTX9160P2 -+# endif -+# define machine_is_ptx9160p2() (machine_arch_type == MACH_TYPE_PTX9160P2) -+#else -+# define machine_is_ptx9160p2() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DCORE1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DCORE1 -+# endif -+# define machine_is_dcore1() (machine_arch_type == MACH_TYPE_DCORE1) -+#else -+# define machine_is_dcore1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VICTORPXA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VICTORPXA -+# endif -+# define machine_is_victorpxa() (machine_arch_type == MACH_TYPE_VICTORPXA) -+#else -+# define machine_is_victorpxa() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MX2DTB -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MX2DTB -+# endif -+# define machine_is_mx2dtb() (machine_arch_type == MACH_TYPE_MX2DTB) -+#else -+# define machine_is_mx2dtb() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PXA_IREX_ER0100 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PXA_IREX_ER0100 -+# endif -+# define machine_is_pxa_irex_er0100() (machine_arch_type == MACH_TYPE_PXA_IREX_ER0100) -+#else -+# define machine_is_pxa_irex_er0100() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_PALMZ71 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_PALMZ71 -+# endif -+# define machine_is_omap_palmz71() (machine_arch_type == MACH_TYPE_OMAP_PALMZ71) -+#else -+# define machine_is_omap_palmz71() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_DEG -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_DEG -+# endif -+# define machine_is_bartec_deg() (machine_arch_type == MACH_TYPE_BARTEC_DEG) -+#else -+# define machine_is_bartec_deg() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HW50251 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HW50251 -+# endif -+# define machine_is_hw50251() (machine_arch_type == MACH_TYPE_HW50251) -+#else -+# define machine_is_hw50251() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IBOX -+# endif -+# define machine_is_ibox() (machine_arch_type == MACH_TYPE_IBOX) -+#else -+# define machine_is_ibox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ATLASLH7A404 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ATLASLH7A404 -+# endif -+# define machine_is_atlaslh7a404() (machine_arch_type == MACH_TYPE_ATLASLH7A404) -+#else -+# define machine_is_atlaslh7a404() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PT2026 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PT2026 -+# endif -+# define machine_is_pt2026() (machine_arch_type == MACH_TYPE_PT2026) -+#else -+# define machine_is_pt2026() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCALPINE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCALPINE -+# endif -+# define machine_is_htcalpine() (machine_arch_type == MACH_TYPE_HTCALPINE) -+#else -+# define machine_is_htcalpine() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BARTEC_VTU -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BARTEC_VTU -+# endif -+# define machine_is_bartec_vtu() (machine_arch_type == MACH_TYPE_BARTEC_VTU) -+#else -+# define machine_is_bartec_vtu() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VCOREII -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VCOREII -+# endif -+# define machine_is_vcoreii() (machine_arch_type == MACH_TYPE_VCOREII) -+#else -+# define machine_is_vcoreii() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PDNB3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PDNB3 -+# endif -+# define machine_is_pdnb3() (machine_arch_type == MACH_TYPE_PDNB3) -+#else -+# define machine_is_pdnb3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HTCBEETLES -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HTCBEETLES -+# endif -+# define machine_is_htcbeetles() (machine_arch_type == MACH_TYPE_HTCBEETLES) -+#else -+# define machine_is_htcbeetles() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C6400 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C6400 -+# endif -+# define machine_is_s3c6400() (machine_arch_type == MACH_TYPE_S3C6400) -+#else -+# define machine_is_s3c6400() (0) -+#endif -+ -+#ifdef CONFIG_MACH_S3C2443 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_S3C2443 -+# endif -+# define machine_is_s3c2443() (machine_arch_type == MACH_TYPE_S3C2443) -+#else -+# define machine_is_s3c2443() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OMAP_LDK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OMAP_LDK -+# endif -+# define machine_is_omap_ldk() (machine_arch_type == MACH_TYPE_OMAP_LDK) -+#else -+# define machine_is_omap_ldk() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2460 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2460 -+# endif -+# define machine_is_smdk2460() (machine_arch_type == MACH_TYPE_SMDK2460) -+#else -+# define machine_is_smdk2460() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2440 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2440 -+# endif -+# define machine_is_smdk2440() (machine_arch_type == MACH_TYPE_SMDK2440) -+#else -+# define machine_is_smdk2440() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2412 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2412 -+# endif -+# define machine_is_smdk2412() (machine_arch_type == MACH_TYPE_SMDK2412) -+#else -+# define machine_is_smdk2412() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WEBBOX -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WEBBOX -+# endif -+# define machine_is_webbox() (machine_arch_type == MACH_TYPE_WEBBOX) -+#else -+# define machine_is_webbox() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CWWNDP -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CWWNDP -+# endif -+# define machine_is_cwwndp() (machine_arch_type == MACH_TYPE_CWWNDP) -+#else -+# define machine_is_cwwndp() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DRAGON -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DRAGON -+# endif -+# define machine_is_dragon() (machine_arch_type == MACH_TYPE_DRAGON) -+#else -+# define machine_is_dragon() (0) -+#endif -+ -+#ifdef CONFIG_MACH_OPENDO_CPU_BOARD -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_OPENDO_CPU_BOARD -+# endif -+# define machine_is_opendo_cpu_board() (machine_arch_type == MACH_TYPE_OPENDO_CPU_BOARD) -+#else -+# define machine_is_opendo_cpu_board() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CCM2200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CCM2200 -+# endif -+# define machine_is_ccm2200() (machine_arch_type == MACH_TYPE_CCM2200) -+#else -+# define machine_is_ccm2200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ETWARM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ETWARM -+# endif -+# define machine_is_etwarm() (machine_arch_type == MACH_TYPE_ETWARM) -+#else -+# define machine_is_etwarm() (0) -+#endif -+ -+#ifdef CONFIG_MACH_M93030 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_M93030 -+# endif -+# define machine_is_m93030() (machine_arch_type == MACH_TYPE_M93030) -+#else -+# define machine_is_m93030() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CC7U -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CC7U -+# endif -+# define machine_is_cc7u() (machine_arch_type == MACH_TYPE_CC7U) -+#else -+# define machine_is_cc7u() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MTT_RANGER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MTT_RANGER -+# endif -+# define machine_is_mtt_ranger() (machine_arch_type == MACH_TYPE_MTT_RANGER) -+#else -+# define machine_is_mtt_ranger() (0) -+#endif -+ -+#ifdef CONFIG_MACH_NEXUS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_NEXUS -+# endif -+# define machine_is_nexus() (machine_arch_type == MACH_TYPE_NEXUS) -+#else -+# define machine_is_nexus() (0) -+#endif -+ -+#ifdef CONFIG_MACH_DESMAN -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_DESMAN -+# endif -+# define machine_is_desman() (machine_arch_type == MACH_TYPE_DESMAN) -+#else -+# define machine_is_desman() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BKDE303 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BKDE303 -+# endif -+# define machine_is_bkde303() (machine_arch_type == MACH_TYPE_BKDE303) -+#else -+# define machine_is_bkde303() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SMDK2413 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SMDK2413 -+# endif -+# define machine_is_smdk2413() (machine_arch_type == MACH_TYPE_SMDK2413) -+#else -+# define machine_is_smdk2413() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M7200 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M7200 -+# endif -+# define machine_is_aml_m7200() (machine_arch_type == MACH_TYPE_AML_M7200) -+#else -+# define machine_is_aml_m7200() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AML_M5900 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AML_M5900 -+# endif -+# define machine_is_aml_m5900() (machine_arch_type == MACH_TYPE_AML_M5900) -+#else -+# define machine_is_aml_m5900() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG640 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG640 -+# endif -+# define machine_is_sg640() (machine_arch_type == MACH_TYPE_SG640) -+#else -+# define machine_is_sg640() (0) -+#endif -+ -+#ifdef CONFIG_MACH_EDG79524 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_EDG79524 -+# endif -+# define machine_is_edg79524() (machine_arch_type == MACH_TYPE_EDG79524) -+#else -+# define machine_is_edg79524() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AI2410 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AI2410 -+# endif -+# define machine_is_ai2410() (machine_arch_type == MACH_TYPE_AI2410) -+#else -+# define machine_is_ai2410() (0) -+#endif -+ -+#ifdef CONFIG_MACH_IXP465 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_IXP465 -+# endif -+# define machine_is_ixp465() (machine_arch_type == MACH_TYPE_IXP465) -+#else -+# define machine_is_ixp465() (0) -+#endif -+ -+#ifdef CONFIG_MACH_BALLOON3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_BALLOON3 -+# endif -+# define machine_is_balloon3() (machine_arch_type == MACH_TYPE_BALLOON3) -+#else -+# define machine_is_balloon3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_HEINS -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_HEINS -+# endif -+# define machine_is_heins() (machine_arch_type == MACH_TYPE_HEINS) -+#else -+# define machine_is_heins() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MPLUSEVA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MPLUSEVA -+# endif -+# define machine_is_mpluseva() (machine_arch_type == MACH_TYPE_MPLUSEVA) -+#else -+# define machine_is_mpluseva() (0) -+#endif -+ -+#ifdef CONFIG_MACH_RT042 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_RT042 -+# endif -+# define machine_is_rt042() (machine_arch_type == MACH_TYPE_RT042) -+#else -+# define machine_is_rt042() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CWIEM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CWIEM -+# endif -+# define machine_is_cwiem() (machine_arch_type == MACH_TYPE_CWIEM) -+#else -+# define machine_is_cwiem() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM_X270 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM_X270 -+# endif -+# define machine_is_cm_x270() (machine_arch_type == MACH_TYPE_CM_X270) -+#else -+# define machine_is_cm_x270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_CM_X255 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_CM_X255 -+# endif -+# define machine_is_cm_x255() (machine_arch_type == MACH_TYPE_CM_X255) -+#else -+# define machine_is_cm_x255() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ESH_AT91 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ESH_AT91 -+# endif -+# define machine_is_esh_at91() (machine_arch_type == MACH_TYPE_ESH_AT91) -+#else -+# define machine_is_esh_at91() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SANDGATE3 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SANDGATE3 -+# endif -+# define machine_is_sandgate3() (machine_arch_type == MACH_TYPE_SANDGATE3) -+#else -+# define machine_is_sandgate3() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PRIMO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PRIMO -+# endif -+# define machine_is_primo() (machine_arch_type == MACH_TYPE_PRIMO) -+#else -+# define machine_is_primo() (0) -+#endif -+ -+#ifdef CONFIG_MACH_GEMSTONE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_GEMSTONE -+# endif -+# define machine_is_gemstone() (machine_arch_type == MACH_TYPE_GEMSTONE) -+#else -+# define machine_is_gemstone() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PRONGHORNMETRO -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PRONGHORNMETRO -+# endif -+# define machine_is_pronghorn_metro() (machine_arch_type == MACH_TYPE_PRONGHORNMETRO) -+#else -+# define machine_is_pronghorn_metro() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SIDEWINDER -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SIDEWINDER -+# endif -+# define machine_is_sidewinder() (machine_arch_type == MACH_TYPE_SIDEWINDER) -+#else -+# define machine_is_sidewinder() (0) -+#endif -+ -+#ifdef CONFIG_MACH_PICOMOD1 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_PICOMOD1 -+# endif -+# define machine_is_picomod1() (machine_arch_type == MACH_TYPE_PICOMOD1) -+#else -+# define machine_is_picomod1() (0) -+#endif -+ -+#ifdef CONFIG_MACH_SG590 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_SG590 -+# endif -+# define machine_is_sg590() (machine_arch_type == MACH_TYPE_SG590) -+#else -+# define machine_is_sg590() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AKAI9307 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AKAI9307 -+# endif -+# define machine_is_akai9307() (machine_arch_type == MACH_TYPE_AKAI9307) -+#else -+# define machine_is_akai9307() (0) -+#endif -+ -+#ifdef CONFIG_MACH_FONTAINE -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_FONTAINE -+# endif -+# define machine_is_fontaine() (machine_arch_type == MACH_TYPE_FONTAINE) -+#else -+# define machine_is_fontaine() (0) -+#endif -+ -+#ifdef CONFIG_MACH_WOMBAT -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_WOMBAT -+# endif -+# define machine_is_wombat() (machine_arch_type == MACH_TYPE_WOMBAT) -+#else -+# define machine_is_wombat() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ACQ300 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ACQ300 -+# endif -+# define machine_is_acq300() (machine_arch_type == MACH_TYPE_ACQ300) -+#else -+# define machine_is_acq300() (0) -+#endif -+ -+#ifdef CONFIG_MACH_MOD_270 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_MOD_270 -+# endif -+# define machine_is_mod_270() (machine_arch_type == MACH_TYPE_MOD_270) -+#else -+# define machine_is_mod_270() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VC0820 -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VC0820 -+# endif -+# define machine_is_vmc_vc0820() (machine_arch_type == MACH_TYPE_VC0820) -+#else -+# define machine_is_vmc_vc0820() (0) -+#endif -+ -+#ifdef CONFIG_MACH_ANI_AIM -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_ANI_AIM -+# endif -+# define machine_is_ani_aim() (machine_arch_type == MACH_TYPE_ANI_AIM) -+#else -+# define machine_is_ani_aim() (0) -+#endif -+ -+#ifdef CONFIG_MACH_JELLYFISH -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_JELLYFISH -+# endif -+# define machine_is_jellyfish() (machine_arch_type == MACH_TYPE_JELLYFISH) -+#else -+# define machine_is_jellyfish() (0) -+#endif -+ -+#ifdef CONFIG_MACH_AMANITA -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_AMANITA -+# endif -+# define machine_is_amanita() (machine_arch_type == MACH_TYPE_AMANITA) -+#else -+# define machine_is_amanita() (0) -+#endif -+ -+#ifdef CONFIG_MACH_VLINK -+# ifdef machine_arch_type -+# undef machine_arch_type -+# define machine_arch_type __machine_arch_type -+# else -+# define machine_arch_type MACH_TYPE_VLINK -+# endif -+# define machine_is_vlink() (machine_arch_type == MACH_TYPE_VLINK) -+#else -+# define machine_is_vlink() (0) -+#endif -+ - /* - * These have not yet been registered - */ -diff -Naur u-boot-1.1.4.org/include/config.h u-boot-1.1.4.tmp/include/config.h ---- u-boot-1.1.4.org/include/config.h 2006-06-05 05:04:25.000000000 +0200 -+++ u-boot-1.1.4.tmp/include/config.h 2006-06-05 05:03:47.000000000 +0200 -@@ -1,2 +1,2 @@ - /* Automatically generated - do not edit */ --#include -+#include -diff -Naur u-boot-1.1.4.org/include/config.mk u-boot-1.1.4.tmp/include/config.mk ---- u-boot-1.1.4.org/include/config.mk 2006-06-05 05:04:25.000000000 +0200 -+++ u-boot-1.1.4.tmp/include/config.mk 2006-06-05 05:03:47.000000000 +0200 -@@ -1,4 +1,4 @@ - ARCH = arm - CPU = arm920t --BOARD = at91rm9200dk -+BOARD = vlink - SOC = at91rm9200 -diff -Naur u-boot-1.1.4.org/include/configs/vlink.h u-boot-1.1.4.tmp/include/configs/vlink.h ---- u-boot-1.1.4.org/include/configs/vlink.h 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4.tmp/include/configs/vlink.h 2006-06-05 03:37:15.000000000 +0200 -@@ -0,0 +1,244 @@ -+/* -+ * Hamish Guthrie -+ * -+ * Configuation settings for the Figment Designs Versalink board. -+ * -+ * See file CREDITS for list of people who contributed to this -+ * project. -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of -+ * the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, -+ * MA 02111-1307 USA -+ */ -+ -+#ifndef __CONFIG_H -+#define __CONFIG_H -+ -+// Added 2 defines to skip re-init lowlevel and relocate HCG HLH -+// -+#define CONFIG_SKIP_LOWLEVEL_INIT -+#define CONFIG_SKIP_RELOCATE_UBOOT -+ -+/* ARM asynchronous clock */ -+#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */ -+#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */ -+/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */ -+ -+#define AT91_SLOW_CLOCK 32768 /* slow clock */ -+ -+#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -+#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */ -+#define CONFIG_VLINK 1 /* on a Versalink Board */ -+#define CONFIG_IDENT_STRING " FDL Versalink" -+#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ -+#define USE_920T_MMU 1 -+ -+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -+#define CONFIG_SETUP_MEMORY_TAGS 1 -+#define CONFIG_INITRD_TAG 1 -+ -+#ifndef CONFIG_SKIP_LOWLEVEL_INIT -+#define CFG_USE_MAIN_OSCILLATOR 1 -+/* flash */ -+#define MC_PUIA_VAL 0x00000000 -+#define MC_PUP_VAL 0x00000000 -+#define MC_PUER_VAL 0x00000000 -+#define MC_ASR_VAL 0x00000000 -+#define MC_AASR_VAL 0x00000000 -+#define EBI_CFGR_VAL 0x00000000 -+#define SMC2_CSR_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ -+ -+/* clocks */ -+#define PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */ -+#define PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */ -+#define MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */ -+ -+/* sdram */ -+#define PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */ -+#define PIOC_BSR_VAL 0x00000000 -+#define PIOC_PDR_VAL 0xFFFF0000 -+#define EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -+#define SDRC_CR_VAL 0x2188c155 /* set up the SDRAM */ -+#define SDRAM 0x20000000 /* address of the SDRAM */ -+#define SDRAM1 0x20000080 /* address of the SDRAM */ -+#define SDRAM_VAL 0x00000000 /* value written to SDRAM */ -+#define SDRC_MR_VAL 0x00000002 /* Precharge All */ -+#define SDRC_MR_VAL1 0x00000004 /* refresh */ -+#define SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -+#define SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -+#define SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ -+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -+/* -+ * Size of malloc() pool -+ */ -+#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -+ -+#define CONFIG_BAUDRATE 115200 -+ -+/* -+ * Hardware drivers -+ */ -+ -+/* define one of these to choose the DBGU, USART0 or USART1 as console */ -+#define CONFIG_DBGU -+#undef CONFIG_USART0 -+#undef CONFIG_USART1 -+ -+#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */ -+ -+#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */ -+ -+#define CONFIG_BOOTDELAY 3 -+/* #define CONFIG_ENV_OVERWRITE 1 */ -+ -+#define CONFIG_COMMANDS \ -+ ((CONFIG_CMD_DFL | CFG_CMD_MII |\ -+ CFG_CMD_DHCP ) & \ -+ ~(CFG_CMD_BDI | \ -+ CFG_CMD_IMI | \ -+ CFG_CMD_AUTOSCRIPT | \ -+ CFG_CMD_FPGA | \ -+ CFG_CMD_MISC | \ -+ CFG_CMD_LOADS )) -+ -+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -+#include -+ -+#ifndef CONFIG_VLINK -+#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -+#define SECTORSIZE 512 -+ -+#define ADDR_COLUMN 1 -+#define ADDR_PAGE 2 -+#define ADDR_COLUMN_PAGE 3 -+ -+#define NAND_ChipID_UNKNOWN 0x00 -+#define NAND_MAX_FLOORS 1 -+#define NAND_MAX_CHIPS 1 -+ -+#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */ -+#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */ -+ -+#define NAND_DISABLE_CE(nand) do { *AT91C_PIOC_SODR = AT91C_PIO_PC0;} while(0) -+#define NAND_ENABLE_CE(nand) do { *AT91C_PIOC_CODR = AT91C_PIO_PC0;} while(0) -+ -+#define NAND_WAIT_READY(nand) while (!(*AT91C_PIOC_PDSR & AT91C_PIO_PC2)) -+ -+#define WRITE_NAND_COMMAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_CLE) = (__u8)(d); } while(0) -+#define WRITE_NAND_ADDRESS(d, adr) do{ *(volatile __u8 *)((unsigned long)adr | AT91_SMART_MEDIA_ALE) = (__u8)(d); } while(0) -+#define WRITE_NAND(d, adr) do{ *(volatile __u8 *)((unsigned long)adr) = (__u8)d; } while(0) -+#define READ_NAND(adr) ((volatile unsigned char)(*(volatile __u8 *)(unsigned long)adr)) -+/* the following are NOP's in our implementation */ -+#define NAND_CTL_CLRALE(nandptr) -+#define NAND_CTL_SETALE(nandptr) -+#define NAND_CTL_CLRCLE(nandptr) -+#define NAND_CTL_SETCLE(nandptr) -+#endif -+ -+#define CONFIG_NR_DRAM_BANKS 1 -+#define PHYS_SDRAM 0x20000000 -+#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */ -+ -+#define CFG_MEMTEST_START PHYS_SDRAM -+#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 -+ -+#define CONFIG_DRIVER_ETHER -+#define CONFIG_NET_RETRY_COUNT 20 -+#define CONFIG_AT91C_USE_RMII -+ -+#define CONFIG_HAS_DATAFLASH 1 -+#define CFG_SPI_WRITE_TOUT (5*CFG_HZ) -+#define CFG_MAX_DATAFLASH_BANKS 2 -+#define CFG_MAX_DATAFLASH_PAGES 16384 -+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */ -+#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */ -+ -+#ifdef CONFIG_VLINK -+#define PHYS_FLASH_1 0x10000000 -+#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */ -+#define CFG_FLASH_BASE PHYS_FLASH_1 -+#define CFG_MAX_FLASH_BANKS 1 -+#define CFG_MAX_FLASH_SECT 256 -+#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -+#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ -+#endif -+ -+#define CFG_ENV_IS_IN_DATAFLASH -+ -+#ifdef CFG_ENV_IS_IN_DATAFLASH -+#define CFG_ENV_OFFSET 0x21000 -+#define CFG_ENV_ADDR (CFG_DATAFLASH_LOGIC_ADDR_CS0 + CFG_ENV_OFFSET) -+#define CFG_ENV_SIZE 0x8400 /* 0x8000 */ -+#else -+#define CFG_ENV_IS_IN_FLASH 1 -+#ifdef CONFIG_SKIP_LOWLEVEL_INIT -+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */ -+#define CFG_ENV_SIZE 0x10000 /* sectors are 64K here */ -+#else -+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */ -+#define CFG_ENV_SIZE 0x2000 /* 0x8000 */ -+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -+#endif /* CFG_ENV_IS_IN_DATAFLASH */ -+ -+ -+#define CFG_LOAD_ADDR 0x21000000 /* default load address */ -+ -+#ifdef CONFIG_SKIP_LOWLEVEL_INIT -+#define CFG_BOOT_SIZE 0x00 /* 0 KBytes */ -+#define CFG_U_BOOT_BASE PHYS_FLASH_1 -+#define CFG_U_BOOT_SIZE 0x60000 /* 384 KBytes */ -+#else -+#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */ -+#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000) -+#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */ -+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ -+ -+#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } -+ -+#define CFG_PROMPT "U-Boot> " /* Monitor Command Prompt */ -+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -+#define CFG_MAXARGS 16 /* max number of command args */ -+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -+ -+#ifndef __ASSEMBLY__ -+/*----------------------------------------------------------------------- -+ * Board specific extension for bd_info -+ * -+ * This structure is embedded in the global bd_info (bd_t) structure -+ * and can be used by the board specific code (eg board/...) -+ */ -+ -+struct bd_info_ext { -+ /* helper variable for board environment handling -+ * -+ * env_crc_valid == 0 => uninitialised -+ * env_crc_valid > 0 => environment crc in flash is valid -+ * env_crc_valid < 0 => environment crc in flash is invalid -+ */ -+ int env_crc_valid; -+}; -+#endif -+ -+#define CFG_HZ 1000 -+#define CFG_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */ -+ /* AT91C_TC_TIMER_DIV1_CLOCK */ -+ -+#define CONFIG_STACKSIZE (32*1024) /* regular stack */ -+ -+#ifdef CONFIG_USE_IRQ -+#error CONFIG_USE_IRQ not supported -+#endif -+ -+#endif -diff -Naur u-boot-1.1.4.org/MAKEALL u-boot-1.1.4.tmp/MAKEALL ---- u-boot-1.1.4.org/MAKEALL 2005-12-16 17:39:27.000000000 +0100 -+++ u-boot-1.1.4.tmp/MAKEALL 2006-06-05 02:44:24.000000000 +0200 -@@ -180,7 +180,7 @@ - mx1ads mx1fs2 omap1510inn omap1610h2 \ - omap1610inn omap730p2 scb9328 smdk2400 \ - smdk2410 trab VCMA9 versatile \ -- versatileab versatilepb voiceblue -+ versatileab versatilepb voiceblue vlink - " - - ######################################################################### -diff -Naur u-boot-1.1.4.org/Makefile u-boot-1.1.4.tmp/Makefile ---- u-boot-1.1.4.org/Makefile 2006-06-02 15:58:57.000000000 +0200 -+++ u-boot-1.1.4.tmp/Makefile 2006-06-05 04:40:45.000000000 +0200 -@@ -1419,6 +1419,9 @@ - mp2usb_config : unconfig - @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200 - -+vlink_config : unconfig -+ @./mkconfig $(@:_config=) arm arm920t vlink NULL at91rm9200 -+ - - ######################################################################## - ## ARM Integrator boards - see doc/README-integrator for more info. diff --git a/target/linux/at91-2.6/image/u-boot/patches/003-mac_init.patch b/target/linux/at91-2.6/image/u-boot/patches/003-mac_init.patch deleted file mode 100644 index ec5dffa0cb..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/003-mac_init.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- u-boot-1.1.4.org/lib_arm/board.c 2006-06-05 12:36:22.000000000 +0200 -+++ u-boot-1.1.4.tmp/lib_arm/board.c 2006-06-05 12:36:44.000000000 +0200 -@@ -332,6 +332,11 @@ - } - #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ - -+#ifdef CONFIG_MACH_VLINK -+ printf("Initialising MAC address\n\r"); -+ eth_init(gd->bd); -+#endif -+ - /* Initialize from environment */ - if ((s = getenv ("loadaddr")) != NULL) { - load_addr = simple_strtoul (s, NULL, 16); diff --git a/target/linux/at91-2.6/image/u-boot/patches/004-mac_config.patch b/target/linux/at91-2.6/image/u-boot/patches/004-mac_config.patch deleted file mode 100644 index 73a8260d68..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/004-mac_config.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- u-boot-1.1.4.ttt/include/configs/vlink.h 2006-06-05 15:57:37.000000000 +0200 -+++ u-boot-1.1.4/include/configs/vlink.h 2006-06-07 13:11:01.000000000 +0200 -@@ -105,9 +105,9 @@ - - #define CONFIG_COMMANDS \ - ((CONFIG_CMD_DFL | CFG_CMD_MII |\ -- CFG_CMD_DHCP ) & \ -- ~(CFG_CMD_BDI | \ -- CFG_CMD_IMI | \ -+ CFG_CMD_DHCP | \ -+ CFG_CMD_BDI ) & \ -+ ~(CFG_CMD_IMI | \ - CFG_CMD_AUTOSCRIPT | \ - CFG_CMD_FPGA | \ - CFG_CMD_MISC | \ diff --git a/target/linux/at91-2.6/image/u-boot/patches/005-remove_float.patch b/target/linux/at91-2.6/image/u-boot/patches/005-remove_float.patch deleted file mode 100644 index 802c963396..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/005-remove_float.patch +++ /dev/null @@ -1,13 +0,0 @@ -diff -urN u-boot-1.1.4.old/cpu/arm920t/config.mk u-boot-1.1.4/cpu/arm920t/config.mk ---- u-boot-1.1.4.old/cpu/arm920t/config.mk 2007-03-19 12:44:39.000000000 +0100 -+++ u-boot-1.1.4/cpu/arm920t/config.mk 2007-03-20 09:23:54.000000000 +0100 -@@ -21,8 +21,7 @@ - # MA 02111-1307 USA - # - --PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 \ -- -msoft-float -+PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8 - - PLATFORM_CPPFLAGS += -march=armv4 - # ========================================================================= diff --git a/target/linux/at91-2.6/image/u-boot/patches/006-generate_params.patch b/target/linux/at91-2.6/image/u-boot/patches/006-generate_params.patch deleted file mode 100644 index d278cfb2da..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/006-generate_params.patch +++ /dev/null @@ -1,115 +0,0 @@ ---- u-boot-1.1.4.old/tools/Makefile 2007-03-22 18:17:25.000000000 +0100 -+++ u-boot-1.1.4/tools/Makefile 2007-03-22 17:08:46.000000000 +0100 -@@ -21,9 +21,9 @@ - # MA 02111-1307 USA - # - --BINS = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) -+BINS = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX) ubparams$(SFX) - --OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o -+OBJS = environment.o img2srec.o mkimage.o crc32.o envcrc.o gen_eth_addr.o bmp_logo.o ubparams.o - - ifeq ($(ARCH),mips) - BINS += inca-swap-bytes$(SFX) -@@ -118,6 +118,9 @@ - - all: .depend $(BINS) $(LOGO_H) subdirs - -+ubparams$(SFX): ubparams.o crc32.o -+ $(CC) $(CFLAGS) -o $@ $^ -+ - envcrc$(SFX): envcrc.o crc32.o environment.o - $(CC) $(CFLAGS) -o $@ $^ - -@@ -149,6 +152,9 @@ - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ - -+ubparams.o: ubparams.c -+ $(CC) -g $(CFLAGS) -c $< -+ - envcrc.o: envcrc.c - $(CC) -g $(CFLAGS) -c $< - ---- u-boot-1.1.4.old/tools/ubparams.c 1970-01-01 01:00:00.000000000 +0100 -+++ u-boot-1.1.4/tools/ubparams.c 2007-03-22 18:09:52.000000000 +0100 -@@ -0,0 +1,78 @@ -+/* -+ * ubparams.c -+ * -+ * Generate a u-boot parameter block with correct crc -+ * -+ * (C) 1007 Guthrie Consulting -+ * hamish@prodigi.ch -+ * -+ */ -+ -+#include -+#include -+#include -+ -+#ifndef __ASSEMBLY__ -+#define __ASSEMBLY__ -+#endif -+#define __ASM_STUB_PROCESSOR_H__ -+#include -+#undef __ASSEMBLY__ -+#include "environment.h" -+ -+#define XMK_STR(x) #x -+#define MK_STR(x) XMK_STR(x) -+ -+extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int); -+ -+#if !defined(ENV_CRC) -+#define ENV_CRC ~0 -+#endif -+ -+unsigned int env_size = 0x8400; -+env_t environment = { -+ ENV_CRC, -+ "bootdelay=3\0" -+ "baudrate=115200\0" -+ "stdin=serial\0" -+ "stdout=serial\0" -+ "stderr=serial\0" -+ "partitions=mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data)\0" -+ "fbargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -+ "rdba=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -+ "rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0" -+ "flash=run fbargs; bootm 0xc0042000\0" -+ "bootargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -+ "bootcmd=bootm 0xc0042000\0" -+ "ethaddr=00:30:49:00:00:01\0" -+ "ipaddr=10.0.1.73\0" -+ "serverip=10.0.1.210\0" -+ "serial#=MX070205484\0" -+ "\0" -+ }; -+ -+int main(void) { -+ env_t *envptr, *source; -+ unsigned char *dataptr; -+ FILE *params; -+ -+ source = &environment; -+ envptr = (env_t *)malloc(CFG_ENV_SIZE); -+ dataptr = (unsigned char *)envptr + ENV_HEADER_SIZE; -+ -+ printf("Make u-boot params\n"); -+ printf("Params size is %d\n", CFG_ENV_SIZE); -+ -+ memset(envptr, 0, CFG_ENV_SIZE); -+ memcpy(envptr, source, sizeof(environment)); -+ -+ envptr->crc = crc32(0, envptr->data, ENV_SIZE); -+ -+ params = fopen("params", "w"); -+ fwrite(envptr, CFG_ENV_SIZE, 1, params); -+ fclose(params); -+ -+ free(envptr); -+ } -+ -+ diff --git a/target/linux/at91-2.6/image/u-boot/patches/007-ubparams_bugfix.patch b/target/linux/at91-2.6/image/u-boot/patches/007-ubparams_bugfix.patch deleted file mode 100644 index 3d069e4d39..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/007-ubparams_bugfix.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- u-boot-1.1.4.old/tools/ubparams.c 2007-03-22 18:09:52.000000000 +0100 -+++ u-boot-1.1.4/tools/ubparams.c 2007-03-22 18:29:32.000000000 +0100 -@@ -18,7 +18,7 @@ - #define __ASM_STUB_PROCESSOR_H__ - #include - #undef __ASSEMBLY__ --#include "environment.h" -+#include - - #define XMK_STR(x) #x - #define MK_STR(x) XMK_STR(x) diff --git a/target/linux/at91-2.6/image/u-boot/patches/008-ubparams_bugfix.patch b/target/linux/at91-2.6/image/u-boot/patches/008-ubparams_bugfix.patch deleted file mode 100644 index 9a16e1998f..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/008-ubparams_bugfix.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- u-boot-1.1.4.old/tools/ubparams.c 2007-03-23 10:51:17.000000000 +0100 -+++ u-boot-1.1.4/tools/ubparams.c 2007-03-23 10:49:37.000000000 +0100 -@@ -73,6 +73,7 @@ - fclose(params); - - free(envptr); -+ return 0; - } - - diff --git a/target/linux/at91-2.6/image/u-boot/patches/009-mac_init_bugfix.patch b/target/linux/at91-2.6/image/u-boot/patches/009-mac_init_bugfix.patch deleted file mode 100644 index a36ebe3251..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/009-mac_init_bugfix.patch +++ /dev/null @@ -1,12 +0,0 @@ -diff -urN u-boot-1.1.4.old/lib_arm/board.c u-boot-1.1.4/lib_arm/board.c ---- u-boot-1.1.4.old/lib_arm/board.c 2007-03-23 10:53:52.000000000 +0100 -+++ u-boot-1.1.4/lib_arm/board.c 2007-03-24 13:17:12.000000000 +0100 -@@ -332,7 +332,7 @@ - } - #endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */ - --#ifdef CONFIG_MACH_VLINK -+#ifdef CONFIG_VLINK - printf("Initialising MAC address\n\r"); - eth_init(gd->bd); - #endif diff --git a/target/linux/at91-2.6/image/u-boot/patches/010-irda-patch-remove.patch b/target/linux/at91-2.6/image/u-boot/patches/010-irda-patch-remove.patch deleted file mode 100644 index 2f23f5b38b..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/010-irda-patch-remove.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- u-boot-1.1.4.old/board/vlink/vlink.c 2007-04-03 11:42:39.000000000 +0200 -+++ u-boot-1.1.4/board/vlink/vlink.c 2007-04-03 11:48:33.000000000 +0200 -@@ -40,10 +40,6 @@ - /* Enable Ctrlc */ - console_init_f (); - -- /* Correct IRDA resistor problem */ -- /* Set PA23_TXD in Output */ -- (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; -- - /* memory and cpu-speed are setup before relocation */ - /* so we do _nothing_ here */ - diff --git a/target/linux/at91-2.6/image/u-boot/patches/011-ubparams_update.patch b/target/linux/at91-2.6/image/u-boot/patches/011-ubparams_update.patch deleted file mode 100644 index 267903efe4..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/011-ubparams_update.patch +++ /dev/null @@ -1,19 +0,0 @@ -diff -urN u-boot-1.1.4.old/tools/ubparams.c u-boot-1.1.4/tools/ubparams.c ---- u-boot-1.1.4.old/tools/ubparams.c 2007-05-01 13:20:17.000000000 +0200 -+++ u-boot-1.1.4/tools/ubparams.c 2007-05-04 10:13:34.000000000 +0200 -@@ -37,12 +37,11 @@ - "stdin=serial\0" - "stdout=serial\0" - "stderr=serial\0" -- "partitions=mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data)\0" -- "fbargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -- "rdba=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -+ "fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -+ "rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0" - "flash=run fbargs; bootm 0xc0042000\0" -- "bootargs=setenv bootargs mtdparts=AT45DB642.spi0:132k(bootloader),33k(ubparams),99k(spare),1056k(linux),2112k(rootfs),33k(nvram),-(rootfs_data) root=/dev/mtdblock4 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -+ "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "bootcmd=bootm 0xc0042000\0" - "ethaddr=00:30:49:00:00:01\0" - "ipaddr=10.0.1.73\0" diff --git a/target/linux/at91-2.6/image/u-boot/patches/012-make_3.81.patch b/target/linux/at91-2.6/image/u-boot/patches/012-make_3.81.patch deleted file mode 100644 index 767493f901..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/012-make_3.81.patch +++ /dev/null @@ -1,16 +0,0 @@ -diff -urN u-boot-1.1.4.orig/examples/Makefile u-boot-1.1.4/examples/Makefile ---- u-boot-1.1.4.orig/examples/Makefile 2007-05-13 13:45:44.000000000 +0200 -+++ u-boot-1.1.4/examples/Makefile 2007-05-13 13:48:43.000000000 +0200 -@@ -123,10 +123,10 @@ - $(LD) -g $(EX_LDFLAGS) -Ttext $(LOAD_ADDR) \ - -o $@ -e $(<:.o=) $< $(LIB) \ - -L$(gcclibdir) -lgcc --%.srec: % -+%.srec: %.o - $(OBJCOPY) -O srec $< $@ 2>/dev/null - --%.bin: % -+%.bin: %.o - $(OBJCOPY) -O binary $< $@ 2>/dev/null - - ######################################################################### diff --git a/target/linux/at91-2.6/image/u-boot/patches/013-params-in-config.patch b/target/linux/at91-2.6/image/u-boot/patches/013-params-in-config.patch deleted file mode 100644 index 11ff2a39cb..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/013-params-in-config.patch +++ /dev/null @@ -1,24 +0,0 @@ ---- u-boot-1.1.4.old/tools/Makefile 2007-06-13 13:35:59.000000000 +0200 -+++ u-boot-1.1.4/tools/Makefile 2007-06-14 15:33:04.000000000 +0200 -@@ -153,7 +153,7 @@ - $(STRIP) $@ - - ubparams.o: ubparams.c -- $(CC) -g $(CFLAGS) -c $< -+ $(CC) -g $(CFLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c $< - - envcrc.o: envcrc.c - $(CC) -g $(CFLAGS) -c $< ---- u-boot-1.1.4.old/tools/ubparams.c 2007-06-13 13:35:59.000000000 +0200 -+++ u-boot-1.1.4/tools/ubparams.c 2007-06-14 15:31:55.000000000 +0200 -@@ -44,8 +44,8 @@ - "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "bootcmd=bootm 0xc0042000\0" - "ethaddr=00:30:49:00:00:01\0" -- "ipaddr=10.0.1.73\0" -- "serverip=10.0.1.210\0" -+ "ipaddr=" MK_STR(LAN_IP) "\0" -+ "serverip=" MK_STR(LAN_SERVERIP) "\0" - "serial#=MX070205484\0" - "\0" - }; diff --git a/target/linux/at91-2.6/image/u-boot/patches/014-ubparam-kernel.patch b/target/linux/at91-2.6/image/u-boot/patches/014-ubparam-kernel.patch deleted file mode 100644 index f6d0a1b191..0000000000 --- a/target/linux/at91-2.6/image/u-boot/patches/014-ubparam-kernel.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- u-boot-1.1.4.old/tools/ubparams.c 2007-06-19 14:24:39.000000000 +0200 -+++ u-boot-1.1.4/tools/ubparams.c 2007-06-19 14:25:05.000000000 +0200 -@@ -39,7 +39,7 @@ - "stderr=serial\0" - "fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" -- "rdram=run rdba; tftp 21000000 vImage; tftp 21200000 root.squashfs; bootm 21000000\0" -+ "rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0" - "flash=run fbargs; bootm 0xc0042000\0" - "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "bootcmd=bootm 0xc0042000\0" diff --git a/target/linux/at91-2.6/image/u-boot/ubclient/Makefile b/target/linux/at91-2.6/image/u-boot/ubclient/Makefile deleted file mode 100644 index f8ff67cd18..0000000000 --- a/target/linux/at91-2.6/image/u-boot/ubclient/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# - -all: ubpar - -crc32.c: - ln -s ../lib_generic/crc32.c ./ - -%.o: %.c - $(CC) -I ../include $(CFLAGS) $(EXTRA_FLAGS) -DLAN_IP=$(LAN_IP) -DLAN_SERVERIP=$(LAN_SERVERIP) -c -o $@ $^ - -ubpar: ubpar.o crc32.o - $(CC) -o $@ $^ - -clean: - rm -f *.o ubpar diff --git a/target/linux/at91-2.6/image/u-boot/ubclient/ubpar.c b/target/linux/at91-2.6/image/u-boot/ubclient/ubpar.c deleted file mode 100644 index 7e8ea0eb2d..0000000000 --- a/target/linux/at91-2.6/image/u-boot/ubclient/ubpar.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * ubparams.c - * - * Generate a u-boot parameter block with correct crc - * - * (C) 1007 Guthrie Consulting - * hamish@prodigi.ch - * - */ - -#include -#include -#include - -#ifndef __ASSEMBLY__ -#define __ASSEMBLY__ -#endif -#define __ASM_STUB_PROCESSOR_H__ -#include -#undef __ASSEMBLY__ -#include - -#define XMK_STR(x) #x -#define MK_STR(x) XMK_STR(x) - -extern unsigned long crc32 (unsigned long, const unsigned char *, unsigned int); - -#if !defined(ENV_CRC) -#define ENV_CRC ~0 -#endif - -#ifdef LAN_IP - #warning LAN_IP -#else - #warning LAN_IP NOT DEFINED -#endif -#ifdef LAN_SERVERIP - #warning LAN_SERVERIP -#else - #warning LAN_SERVERIP NOT DEFINED -#endif - -static char *environment[] = { - "bootdelay=3\0" - "baudrate=115200\0" - "stdin=serial\0" - "stdout=serial\0" - "stderr=serial\0" - "fbargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "rdba=setenv bootargs root=/dev/ram rw initrd=0x21200000,6000000 ramdisk_size=20000 init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "rdram=run rdba; tftp 21000000 uImage; tftp 21200000 root.squashfs; bootm 21000000\0" - "flash=run fbargs; bootm 0xc0042000\0" - "bootargs=setenv bootargs root=/dev/mtdblock3 ro init=/etc/preinit console=/dev/ttyS0,115200,mem=32M\0" - "bootcmd=bootm 0xc0042000\0" - "ipaddr=" MK_STR(LAN_IP) "\0" - "serverip=" MK_STR(LAN_SERVERIP) "\0" - "\0" - }; - -int main(int argc, char *argv[]) { - env_t *envptr; - char *src, *srcptr; - char *dataptr; - FILE *params; - int argfail = 1; - char newmac[30]; - char newser[30]; - int paramlen = 0; - int progmac = 0; - int progser = 0; - - if (argc < 3) { - printf ("Invalid arguments\n"); - return 1; - } - - switch (argc) { - case 5: - if (strcmp(argv[3], "--serial") == 0) { - argfail = 0; - sprintf(newser, "serial#=%s", argv[4]); - progser = 1; - } - case 3: - if (strcmp(argv[1], "--mac") == 0) { - argfail = 0; - sprintf(newmac, "ethaddr=%s", argv[2]); - progmac = 1; - } - else - argfail = 1; - } - - if (argfail) { - printf("Invalid arguments\n"); - return 1; - } - - - src = srcptr = *environment; - envptr = (env_t *)malloc(CFG_ENV_SIZE); - dataptr = (char *)envptr + ENV_HEADER_SIZE; - - while(*srcptr) { - //printf("%d, %s\n", strlen(srcptr), srcptr); - paramlen += strlen(srcptr) + 1; - srcptr += strlen(srcptr) + 1; - } - - printf("Make u-boot params\n"); - printf("Params size is %d\n", CFG_ENV_SIZE); - - memset(envptr, 0, CFG_ENV_SIZE); - memcpy(dataptr, src, paramlen); - dataptr += paramlen; - - if (progmac) { - memcpy(dataptr, newmac, strlen(newmac)); - dataptr += strlen(newmac) + 1; - } - - if (progser) { - memcpy(dataptr, newser, strlen(newser)); - dataptr += strlen(newser) + 1; - } - - envptr->crc = crc32(0, envptr->data, ENV_SIZE); - - params = fopen("/dev/mtd1", "w"); - fwrite(envptr, CFG_ENV_SIZE, 1, params); - fclose(params); - - free(envptr); - return 0; -} diff --git a/target/linux/at91-2.6/patches-2.6.21/000-at91patches.patch b/target/linux/at91-2.6/patches-2.6.21/000-at91patches.patch deleted file mode 100644 index 93fa2cf03c..0000000000 --- a/target/linux/at91-2.6/patches-2.6.21/000-at91patches.patch +++ /dev/null @@ -1,10312 +0,0 @@ -diff -urN -x CVS linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S ---- linux-2.6.21/arch/arm/boot/compressed/head-at91rm9200.S Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/boot/compressed/head-at91rm9200.S Tue May 8 12:13:30 2007 -@@ -67,6 +67,12 @@ - cmp r7, r3 - beq 99f - -+ @ Promwad Chub : 1181 -+ mov r3, #(MACH_TYPE_CHUB & 0xff) -+ orr r3, r3, #(MACH_TYPE_CHUB & 0xff00) -+ cmp r7, r3 -+ beq 99f -+ - @ Unknown board, use the AT91RM9200DK board - @ mov r7, #MACH_TYPE_AT91RM9200 - mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff) -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Kconfig linux-2.6-stable/arch/arm/mach-at91/Kconfig ---- linux-2.6.21/arch/arm/mach-at91/Kconfig Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/Kconfig Wed May 9 10:20:54 2007 -@@ -17,6 +17,9 @@ - config ARCH_AT91SAM9263 - bool "AT91SAM9263" - -+config ARCH_AT91SAM9RL -+ bool "AT91SAM9RL" -+ - endchoice - - # ---------------------------------------------------------- -@@ -87,6 +90,12 @@ - help - Select this if you are using Sperry-Sun's KAFA board. - -+config MACH_CHUB -+ bool "Promwad Chub board" -+ depends on ARCH_AT91RM9200 -+ help -+ Select this if you are using Promwad's Chub board. -+ - endif - - # ---------------------------------------------------------- -@@ -111,6 +120,13 @@ - Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit - - -+config MACH_CAM60 -+ bool "KwikByte CAM60 board" -+ depends on ARCH_AT91SAM9260 -+ help -+ Select this if you are using KwikByte's CAM60 board based on the Atmel AT91SAM9260. -+ -+ - endif - - # ---------------------------------------------------------- -@@ -145,6 +161,20 @@ - - # ---------------------------------------------------------- - -+if ARCH_AT91SAM9RL -+ -+comment "AT91SAM9RL Board Type" -+ -+config MACH_AT91SAM9RLEK -+ bool "Atmel AT91SAM9RL-EK Evaluation Kit" -+ depends on ARCH_AT91SAM9RL -+ help -+ Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. -+ -+endif -+ -+# ---------------------------------------------------------- -+ - comment "AT91 Board Options" - - config MTD_AT91_DATAFLASH_CARD -@@ -160,6 +190,20 @@ - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - -+config CSB300_WAKE_SW0 -+ bool "CSB300 SW0 irq0 wakeup" -+ depends on MACH_CSB337 && PM -+ help -+ If you have a CSB300 connected to your CSB337, this lets -+ SW0 serve as a wakeup button. It uses IRQ0. -+ -+config CSB300_WAKE_SW1 -+ bool "CSB300 SW1 gpio wakeup" -+ depends on MACH_CSB337 && PM -+ help -+ If you have a CSB300 connected to your CSB337, this lets -+ SW1 serve as a wakeup button. It uses GPIO. -+ - # ---------------------------------------------------------- - - comment "AT91 Feature Selections" -@@ -170,6 +214,20 @@ - Select this if you need to program one or more of the PCK0..PCK3 - programmable clock outputs. - -+config ATMEL_TCLIB -+ bool "Timer/Counter Library" -+ help -+ Select this if you want a library to allocate the Timer/Counter -+ blocks found on many Atmel processors. This facilitates using -+ these modules despite processor differences. -+ -+config AT91_SLOW_CLOCK -+ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)" -+ depends on PM && EXPERIMENTAL -+ help -+ Select this if you wish to put the CPU into slow clock mode -+ while in the "Suspend to RAM" state, to save more power. -+ - endmenu - - endif -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/Makefile linux-2.6-stable/arch/arm/mach-at91/Makefile ---- linux-2.6.21/arch/arm/mach-at91/Makefile Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/Makefile Wed May 9 12:37:19 2007 -@@ -8,12 +8,15 @@ - obj- := - - obj-$(CONFIG_PM) += pm.o -+obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o -+obj-$(CONFIG_ATMEL_TCLIB) += tclib.o - - # CPU-specific support - obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o - obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o - obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o - obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o -+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o - - # AT91RM9200 board-specific support - obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -@@ -25,9 +28,11 @@ - obj-$(CONFIG_MACH_KB9200) += board-kb9202.o - obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o - obj-$(CONFIG_MACH_KAFA) += board-kafa.o -+obj-$(CONFIG_MACH_CHUB) += board-chub.o - - # AT91SAM9260 board-specific support - obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o -+obj-$(CONFIG_MACH_CAM60) += board-cam60.o - - # AT91SAM9261 board-specific support - obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o -@@ -35,9 +40,13 @@ - # AT91SAM9263 board-specific support - obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o - -+# AT91SAM9RL board-specific support -+obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o -+ - # LEDs support - led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o - led-$(CONFIG_MACH_AT91RM9200EK) += leds.o -+led-$(CONFIG_MACH_AT91SAM9261EK)+= leds.o - led-$(CONFIG_MACH_CSB337) += leds.o - led-$(CONFIG_MACH_CSB637) += leds.o - led-$(CONFIG_MACH_KB9200) += leds.o -@@ -45,7 +54,7 @@ - obj-$(CONFIG_LEDS) += $(led-y) - - # VGA support --#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o -+obj-$(CONFIG_FB_S1D13XXX) += ics1523.o - - - ifeq ($(CONFIG_PM_DEBUG),y) -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c ---- linux-2.6.21/arch/arm/mach-at91/at91rm9200.c Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200.c Tue May 8 12:13:30 2007 -@@ -117,6 +117,21 @@ - .pmc_mask = 1 << AT91RM9200_ID_PIOD, - .type = CLK_TYPE_PERIPHERAL, - }; -+static struct clk ssc0_clk = { -+ .name = "ssc0_clk", -+ .pmc_mask = 1 << AT91RM9200_ID_SSC0, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ssc1_clk = { -+ .name = "ssc1_clk", -+ .pmc_mask = 1 << AT91RM9200_ID_SSC1, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ssc2_clk = { -+ .name = "ssc2_clk", -+ .pmc_mask = 1 << AT91RM9200_ID_SSC2, -+ .type = CLK_TYPE_PERIPHERAL, -+}; - static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91RM9200_ID_TC0, -@@ -161,7 +176,9 @@ - &udc_clk, - &twi_clk, - &spi_clk, -- // ssc 0 .. ssc2 -+ &ssc0_clk, -+ &ssc1_clk, -+ &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, -@@ -250,6 +267,33 @@ - - - /* -------------------------------------------------------------------- -+ * Timer/Counter library initialization -+ * -------------------------------------------------------------------- */ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+#include "tclib.h" -+ -+static struct atmel_tcblock at91rm9200_tcblocks[] = { -+ [0] = { -+ .physaddr = AT91RM9200_BASE_TCB0, -+ .irq = { AT91RM9200_ID_TC0, AT91RM9200_ID_TC1, AT91RM9200_ID_TC2 }, -+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, -+ }, -+ [1] = { -+ .physaddr = AT91RM9200_BASE_TCB1, -+ .irq = { AT91RM9200_ID_TC3, AT91RM9200_ID_TC4, AT91RM9200_ID_TC5 }, -+ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, -+ }, -+}; -+ -+#define at91rm9200_tc_init() atmel_tc_init(at91rm9200_tcblocks, ARRAY_SIZE(at91rm9200_tcblocks)) -+ -+#else -+#define at91rm9200_tc_init() do {} while(0) -+#endif -+ -+ -+/* -------------------------------------------------------------------- - * AT91RM9200 processor initialization - * -------------------------------------------------------------------- */ - void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) -@@ -271,6 +315,9 @@ - - /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, banks); -+ -+ /* Initialize the Timer/Counter blocks */ -+ at91rm9200_tc_init(); - } - - -@@ -284,28 +331,28 @@ - static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ -- 0, /* Parallel IO Controller A */ -- 0, /* Parallel IO Controller B */ -- 0, /* Parallel IO Controller C */ -- 0, /* Parallel IO Controller D */ -- 6, /* USART 0 */ -- 6, /* USART 1 */ -- 6, /* USART 2 */ -- 6, /* USART 3 */ -+ 1, /* Parallel IO Controller A */ -+ 1, /* Parallel IO Controller B */ -+ 1, /* Parallel IO Controller C */ -+ 1, /* Parallel IO Controller D */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ -+ 5, /* USART 3 */ - 0, /* Multimedia Card Interface */ -- 4, /* USB Device Port */ -- 0, /* Two-Wire Interface */ -- 6, /* Serial Peripheral Interface */ -- 5, /* Serial Synchronous Controller 0 */ -- 5, /* Serial Synchronous Controller 1 */ -- 5, /* Serial Synchronous Controller 2 */ -+ 2, /* USB Device Port */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface */ -+ 4, /* Serial Synchronous Controller 0 */ -+ 4, /* Serial Synchronous Controller 1 */ -+ 4, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ -- 3, /* USB Host port */ -+ 2, /* USB Host port */ - 3, /* Ethernet MAC */ - 0, /* Advanced Interrupt Controller (IRQ0) */ - 0, /* Advanced Interrupt Controller (IRQ1) */ -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c ---- linux-2.6.21/arch/arm/mach-at91/at91rm9200_devices.c Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/at91rm9200_devices.c Tue May 8 12:13:30 2007 -@@ -480,7 +480,18 @@ - * SPI - * -------------------------------------------------------------------- */ - --#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) -+#if defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) /* legacy SPI driver */ -+#define SPI_DEVNAME "at91_spi" -+ -+#elif defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) /* SPI bitbanging driver */ -+#define SPI_DEVNAME "at91_spi" -+ -+#elif defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) /* new SPI driver */ -+#define SPI_DEVNAME "atmel_spi" -+ -+#endif -+ -+#ifdef SPI_DEVNAME - static u64 spi_dmamask = 0xffffffffUL; - - static struct resource spi_resources[] = { -@@ -497,7 +508,7 @@ - }; - - static struct platform_device at91rm9200_spi_device = { -- .name = "at91_spi", -+ .name = SPI_DEVNAME, - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, -@@ -606,6 +617,32 @@ - #endif - - -+#if defined(CONFIG_NEW_LEDS) -+ -+static struct platform_device at91_leds = { -+ .name = "at91_leds", -+ .id = -1, -+}; -+ -+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) -+{ -+ if (!nr) -+ return; -+ -+ at91_leds.dev.platform_data = leds; -+ -+ for ( ; nr; nr--, leds++) { -+ leds->index = nr; /* first record stores number of leds */ -+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); -+ } -+ -+ platform_device_register(&at91_leds); -+} -+#else -+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} -+#endif -+ -+ - /* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c ---- linux-2.6.21/arch/arm/mach-at91/at91sam9260.c Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260.c Tue May 8 12:13:30 2007 -@@ -119,6 +119,11 @@ - .pmc_mask = 1 << AT91SAM9260_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, - }; -+static struct clk ssc_clk = { -+ .name = "ssc_clk", -+ .pmc_mask = 1 << AT91SAM9260_ID_SSC, -+ .type = CLK_TYPE_PERIPHERAL, -+}; - static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91SAM9260_ID_TC0, -@@ -193,7 +198,7 @@ - &twi_clk, - &spi0_clk, - &spi1_clk, -- // ssc -+ &ssc_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, -@@ -264,6 +269,33 @@ - - - /* -------------------------------------------------------------------- -+ * Timer/Counter library initialization -+ * -------------------------------------------------------------------- */ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+#include "tclib.h" -+ -+static struct atmel_tcblock at91sam9260_tcblocks[] = { -+ [0] = { -+ .physaddr = AT91SAM9260_BASE_TCB0, -+ .irq = { AT91SAM9260_ID_TC0, AT91SAM9260_ID_TC1, AT91SAM9260_ID_TC2 }, -+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, -+ }, -+ [1] = { -+ .physaddr = AT91SAM9260_BASE_TCB1, -+ .irq = { AT91SAM9260_ID_TC3, AT91SAM9260_ID_TC4, AT91SAM9260_ID_TC5 }, -+ .clk = { &tc3_clk, &tc4_clk, &tc5_clk }, -+ }, -+}; -+ -+#define at91sam9260_tc_init() atmel_tc_init(at91sam9260_tcblocks, ARRAY_SIZE(at91sam9260_tcblocks)) -+ -+#else -+#define at91sam9260_tc_init() do {} while(0) -+#endif -+ -+ -+/* -------------------------------------------------------------------- - * AT91SAM9260 processor initialization - * -------------------------------------------------------------------- */ - -@@ -310,6 +342,9 @@ - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9260_gpio, 3); -+ -+ /* Initialize the Timer/Counter blocks */ -+ at91sam9260_tc_init(); - } - - /* -------------------------------------------------------------------- -@@ -322,30 +357,30 @@ - static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ -- 0, /* Parallel IO Controller A */ -- 0, /* Parallel IO Controller B */ -- 0, /* Parallel IO Controller C */ -+ 1, /* Parallel IO Controller A */ -+ 1, /* Parallel IO Controller B */ -+ 1, /* Parallel IO Controller C */ - 0, /* Analog-to-Digital Converter */ -- 6, /* USART 0 */ -- 6, /* USART 1 */ -- 6, /* USART 2 */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ -- 4, /* USB Device Port */ -- 0, /* Two-Wire Interface */ -- 6, /* Serial Peripheral Interface 0 */ -- 6, /* Serial Peripheral Interface 1 */ -+ 2, /* USB Device Port */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface 0 */ -+ 5, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller */ - 0, - 0, - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ -- 3, /* USB Host port */ -+ 2, /* USB Host port */ - 3, /* Ethernet */ - 0, /* Image Sensor Interface */ -- 6, /* USART 3 */ -- 6, /* USART 4 */ -- 6, /* USART 5 */ -+ 5, /* USART 3 */ -+ 5, /* USART 4 */ -+ 5, /* USART 5 */ - 0, /* Timer Counter 3 */ - 0, /* Timer Counter 4 */ - 0, /* Timer Counter 5 */ -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c ---- linux-2.6.21/arch/arm/mach-at91/at91sam9260_devices.c Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9260_devices.c Tue May 8 12:13:30 2007 -@@ -527,6 +527,32 @@ - #endif - - -+#if defined(CONFIG_NEW_LEDS) -+ -+static struct platform_device at91_leds = { -+ .name = "at91_leds", -+ .id = -1, -+}; -+ -+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) -+{ -+ if (!nr) -+ return; -+ -+ at91_leds.dev.platform_data = leds; -+ -+ for ( ; nr; nr--, leds++) { -+ leds->index = nr; /* first record stores number of leds */ -+ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); -+ } -+ -+ platform_device_register(&at91_leds); -+} -+#else -+void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} -+#endif -+ -+ - /* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c ---- linux-2.6.21/arch/arm/mach-at91/at91sam9261.c Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261.c Tue May 8 12:13:30 2007 -@@ -97,6 +97,21 @@ - .pmc_mask = 1 << AT91SAM9261_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, - }; -+static struct clk ssc0_clk = { -+ .name = "ssc0_clk", -+ .pmc_mask = 1 << AT91SAM9261_ID_SSC0, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ssc1_clk = { -+ .name = "ssc1_clk", -+ .pmc_mask = 1 << AT91SAM9261_ID_SSC1, -+ .type = CLK_TYPE_PERIPHERAL, -+}; -+static struct clk ssc2_clk = { -+ .name = "ssc2_clk", -+ .pmc_mask = 1 << AT91SAM9261_ID_SSC2, -+ .type = CLK_TYPE_PERIPHERAL, -+}; - static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT91SAM9261_ID_TC0, -@@ -135,7 +150,9 @@ - &twi_clk, - &spi0_clk, - &spi1_clk, -- // ssc 0 .. ssc2 -+ &ssc0_clk, -+ &ssc1_clk, -+ &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, -@@ -230,6 +247,28 @@ - - - /* -------------------------------------------------------------------- -+ * Timer/Counter library initialization -+ * -------------------------------------------------------------------- */ -+#ifdef CONFIG_ATMEL_TCLIB -+ -+#include "tclib.h" -+ -+static struct atmel_tcblock at91sam9261_tcblocks[] = { -+ [0] = { -+ .physaddr = AT91SAM9261_BASE_TCB0, -+ .irq = { AT91SAM9261_ID_TC0, AT91SAM9261_ID_TC1, AT91SAM9261_ID_TC2 }, -+ .clk = { &tc0_clk, &tc1_clk, &tc2_clk }, -+ } -+}; -+ -+#define at91sam9261_tc_init() atmel_tc_init(at91sam9261_tcblocks, ARRAY_SIZE(at91sam9261_tcblocks)) -+ -+#else -+#define at91sam9261_tc_init() do {} while(0) -+#endif -+ -+ -+/* -------------------------------------------------------------------- - * AT91SAM9261 processor initialization - * -------------------------------------------------------------------- */ - -@@ -250,6 +289,9 @@ - - /* Register GPIO subsystem */ - at91_gpio_init(at91sam9261_gpio, 3); -+ -+ /* Initialize the Timer/Counter blocks */ -+ at91sam9261_tc_init(); - } - - /* -------------------------------------------------------------------- -@@ -262,25 +304,25 @@ - static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ -- 0, /* Parallel IO Controller A */ -- 0, /* Parallel IO Controller B */ -- 0, /* Parallel IO Controller C */ -+ 1, /* Parallel IO Controller A */ -+ 1, /* Parallel IO Controller B */ -+ 1, /* Parallel IO Controller C */ - 0, -- 6, /* USART 0 */ -- 6, /* USART 1 */ -- 6, /* USART 2 */ -+ 5, /* USART 0 */ -+ 5, /* USART 1 */ -+ 5, /* USART 2 */ - 0, /* Multimedia Card Interface */ -- 4, /* USB Device Port */ -- 0, /* Two-Wire Interface */ -- 6, /* Serial Peripheral Interface 0 */ -- 6, /* Serial Peripheral Interface 1 */ -- 5, /* Serial Synchronous Controller 0 */ -- 5, /* Serial Synchronous Controller 1 */ -- 5, /* Serial Synchronous Controller 2 */ -+ 2, /* USB Device Port */ -+ 6, /* Two-Wire Interface */ -+ 5, /* Serial Peripheral Interface 0 */ -+ 5, /* Serial Peripheral Interface 1 */ -+ 4, /* Serial Synchronous Controller 0 */ -+ 4, /* Serial Synchronous Controller 1 */ -+ 4, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ -- 3, /* USB Host port */ -+ 2, /* USB Host port */ - 3, /* LCD Controller */ - 0, - 0, -diff -urN -x CVS linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c ---- linux-2.6.21/arch/arm/mach-at91/at91sam9261_devices.c Thu Apr 26 05:08:32 2007 -+++ linux-2.6-stable/arch/arm/mach-at91/at91sam9261_devices.c Tue May 8 12:56:33 2007 -@@ -14,6 +14,9 @@ - #include - - #include -+#include -+ -+#include