From 7d6cff4882e1484e09956e19825acdae3a68618c Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Wed, 2 Sep 2015 10:18:15 +0000 Subject: kernel: update 3.18 to 3.18.21 Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21 Signed-off-by: Jonas Gorski SVN-Revision: 46768 --- ...0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch | 2 +- .../0053-i2c-bcm2708-add-device-tree-support.patch | 2 +- ...0089-Add-2709-platform-for-Raspberry-Pi-2.patch | 4 +-- .../brcm47xx/patches-3.18/159-cpu_fixes.patch | 2 +- .../brcm63xx/patches-3.18/572-board_VR-3026e.patch | 26 ++++++++-------- .../cns3xxx/patches-3.18/070-i2c_support.patch | 2 +- ...-fix-sched_getaffinity-with-MT-FPAFF-enab.patch | 35 ---------------------- .../generic/patches-3.18/834-ledtrig-libata.patch | 10 +++---- .../patches-3.18/921-use_preinit_as_init.patch | 2 +- ...2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch | 2 +- .../linux/lantiq/patches-3.18/0101-mtd-split.patch | 6 ++-- .../0037-USB-phy-add-ralink-SoC-driver.patch | 4 +-- .../0052-i2c-MIPS-adds-ralink-I2C-driver.patch | 2 +- .../linux/ramips/patches-3.18/0060-soc_type.patch | 2 +- .../0062-mt7621-add-ECHI-OCHI-XCHI-support.patch | 8 ++--- .../patches-3.18/0065-fix_dts_cache_issues.patch | 4 +-- .../0074-i2c-MIPS-add-mt7621-I2C-driver.patch | 2 +- .../0100-mtd-split-remove-padding.patch | 2 +- .../patches-3.18/0101-mtd-add-rtn56u-support.patch | 4 +-- 19 files changed, 43 insertions(+), 78 deletions(-) delete mode 100644 target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch (limited to 'target') diff --git a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch b/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch index 95e4a6d244..7795597451 100644 --- a/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch +++ b/target/linux/brcm2708/patches-3.18/0019-Add-Chris-Boot-s-i2c-and-spi-drivers.patch @@ -212,7 +212,7 @@ The correct baudrate is shown in the log after the cdiv > 0xffff correction. static void timer_set_mode(enum clock_event_mode mode, --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -371,6 +371,25 @@ config I2C_BCM2835 +@@ -372,6 +372,25 @@ config I2C_BCM2835 This support is also available as a module. If so, the module will be called i2c-bcm2835. diff --git a/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch b/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch index acf920359b..0269052ae3 100644 --- a/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch +++ b/target/linux/brcm2708/patches-3.18/0053-i2c-bcm2708-add-device-tree-support.patch @@ -147,7 +147,7 @@ Signed-off-by: Noralf Tronnes bcm_register_device(&bcm2835_thermal_device); --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -361,7 +361,7 @@ config I2C_AXXIA +@@ -362,7 +362,7 @@ config I2C_AXXIA config I2C_BCM2835 tristate "Broadcom BCM2835 I2C controller" diff --git a/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch b/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch index 6878838590..c1e938bb33 100644 --- a/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch +++ b/target/linux/brcm2708/patches-3.18/0089-Add-2709-platform-for-Raspberry-Pi-2.patch @@ -9352,7 +9352,7 @@ Subject: [PATCH 089/114] Add 2709 platform for Raspberry Pi 2 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -361,7 +361,7 @@ config I2C_AXXIA +@@ -362,7 +362,7 @@ config I2C_AXXIA config I2C_BCM2835 tristate "Broadcom BCM2835 I2C controller" @@ -9361,7 +9361,7 @@ Subject: [PATCH 089/114] Add 2709 platform for Raspberry Pi 2 help If you say yes to this option, support will be included for the BCM2835 I2C controller. -@@ -373,7 +373,7 @@ config I2C_BCM2835 +@@ -374,7 +374,7 @@ config I2C_BCM2835 config I2C_BCM2708 tristate "BCM2708 BSC" diff --git a/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch b/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch index dd430f52dd..48cf095d0e 100644 --- a/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch +++ b/target/linux/brcm47xx/patches-3.18/159-cpu_fixes.patch @@ -242,7 +242,7 @@ #endif /* _ASM_R4KCACHE_H */ --- a/arch/mips/include/asm/stackframe.h +++ b/arch/mips/include/asm/stackframe.h -@@ -333,6 +333,10 @@ +@@ -358,6 +358,10 @@ .macro RESTORE_SP_AND_RET LONG_L sp, PT_R29(sp) .set arch=r4000 diff --git a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch index 260602adca..4358afda59 100644 --- a/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch +++ b/target/linux/brcm63xx/patches-3.18/572-board_VR-3026e.patch @@ -1,9 +1,9 @@ --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -2168,6 +2168,60 @@ static struct board_info __initdata boar - }, + }, }; - + +static struct sprom_fixup __initdata vr3026e_fixups[] = { + { .offset = 97, .value = 0xfeb3 }, + { .offset = 98, .value = 0x1618 }, @@ -59,21 +59,21 @@ +}; + static struct b53_platform_data WAP5813n_b53_pdata = { - .alias = "eth0", + .alias = "eth0", }; @@ -2472,6 +2526,7 @@ static const struct board_info __initcon - &board_P870HW51A_V2, - &board_VR3025u, - &board_VR3025un, + &board_P870HW51A_V2, + &board_VR3025u, + &board_VR3025un, + &board_VR3026e, - &board_WAP5813n, + &board_WAP5813n, #endif #ifdef CONFIG_BCM63XX_CPU_63268 @@ -2572,6 +2627,7 @@ static struct of_device_id const bcm963x - { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, - { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, - { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, }, + { .compatible = "comtrend,vr-3025u", .data = &board_VR3025u, }, + { .compatible = "comtrend,vr-3025un", .data = &board_VR3025un, }, + { .compatible = "comtrend,vr-3026e", .data = &board_VR3026e, }, - { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, - { .compatible = "huawei,hg655b", .data = &board_HG655b, }, - { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, }, + { .compatible = "comtrend,wap-5813n", .data = &board_WAP5813n, }, + { .compatible = "huawei,hg655b", .data = &board_HG655b, }, + { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, }, diff --git a/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch index 0114d7e781..ff6be6a1ba 100644 --- a/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch +++ b/target/linux/cns3xxx/patches-3.18/070-i2c_support.patch @@ -1,6 +1,6 @@ --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -416,6 +416,18 @@ config I2C_CBUS_GPIO +@@ -417,6 +417,18 @@ config I2C_CBUS_GPIO This driver can also be built as a module. If so, the module will be called i2c-cbus-gpio. diff --git a/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch b/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch deleted file mode 100644 index a7bfef347c..0000000000 --- a/target/linux/generic/patches-3.18/130-MIPS-kernel-fix-sched_getaffinity-with-MT-FPAFF-enab.patch +++ /dev/null @@ -1,35 +0,0 @@ -From: Felix Fietkau -Date: Sun, 19 Jul 2015 00:21:57 +0200 -Subject: [PATCH] MIPS: kernel: fix sched_getaffinity with MT FPAFF enabled - -p->thread.user_cpus_allowed is zero-initialized and is only filled on -the first sched_setaffinity call. - -To avoid adding overhead in the task initialization codepath, simply OR -the returned mask in sched_getaffinity with p->cpus_allowed. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau ---- - ---- a/arch/mips/kernel/mips-mt-fpaff.c -+++ b/arch/mips/kernel/mips-mt-fpaff.c -@@ -154,7 +154,7 @@ asmlinkage long mipsmt_sys_sched_getaffi - unsigned long __user *user_mask_ptr) - { - unsigned int real_len; -- cpumask_t mask; -+ cpumask_t allowed, mask; - int retval; - struct task_struct *p; - -@@ -173,7 +173,8 @@ asmlinkage long mipsmt_sys_sched_getaffi - if (retval) - goto out_unlock; - -- cpumask_and(&mask, &p->thread.user_cpus_allowed, cpu_possible_mask); -+ cpumask_or(&allowed, &p->thread.user_cpus_allowed, &p->cpus_allowed); -+ cpumask_and(&mask, &allowed, cpu_active_mask); - - out_unlock: - read_unlock(&tasklist_lock); diff --git a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch index 1360ce9fb8..4c0ffcac91 100644 --- a/target/linux/generic/patches-3.18/834-ledtrig-libata.patch +++ b/target/linux/generic/patches-3.18/834-ledtrig-libata.patch @@ -69,7 +69,7 @@ Signed-off-by: Daniel Golle /** * ata_build_rw_tf - Build ATA taskfile for given read/write request * @tf: Target ATA taskfile -@@ -4761,6 +4774,9 @@ static struct ata_queued_cmd *ata_qc_new +@@ -4798,6 +4811,9 @@ static struct ata_queued_cmd *ata_qc_new break; } } @@ -79,7 +79,7 @@ Signed-off-by: Daniel Golle return qc; } -@@ -5671,6 +5687,9 @@ struct ata_port *ata_port_alloc(struct a +@@ -5708,6 +5724,9 @@ struct ata_port *ata_port_alloc(struct a ap->stats.unhandled_irq = 1; ap->stats.idle_irq = 1; #endif @@ -89,7 +89,7 @@ Signed-off-by: Daniel Golle ata_sff_port_init(ap); return ap; -@@ -5692,6 +5711,12 @@ static void ata_host_release(struct devi +@@ -5729,6 +5748,12 @@ static void ata_host_release(struct devi kfree(ap->pmp_link); kfree(ap->slave_link); @@ -102,7 +102,7 @@ Signed-off-by: Daniel Golle kfree(ap); host->ports[i] = NULL; } -@@ -6138,7 +6163,23 @@ int ata_host_register(struct ata_host *h +@@ -6175,7 +6200,23 @@ int ata_host_register(struct ata_host *h host->ports[i]->print_id = atomic_inc_return(&ata_print_id); host->ports[i]->local_port_no = i + 1; } @@ -138,7 +138,7 @@ Signed-off-by: Daniel Golle /* * Define if arch has non-standard setup. This is a _PCI_ standard -@@ -872,6 +875,12 @@ struct ata_port { +@@ -874,6 +877,12 @@ struct ata_port { #ifdef CONFIG_ATA_ACPI struct ata_acpi_gtm __acpi_init_gtm; /* use ata_acpi_init_gtm() */ #endif diff --git a/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch b/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch index d297e3bc30..57c2fe27be 100644 --- a/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch +++ b/target/linux/generic/patches-3.18/921-use_preinit_as_init.patch @@ -1,6 +1,6 @@ --- a/init/main.c +++ b/init/main.c -@@ -962,7 +962,8 @@ static int __ref kernel_init(void *unuse +@@ -963,7 +963,8 @@ static int __ref kernel_init(void *unuse pr_err("Failed to execute %s (error %d). Attempting defaults...\n", execute_command, ret); } diff --git a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch index 819eb322cb..4f655db499 100644 --- a/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch +++ b/target/linux/lantiq/patches-3.18/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch @@ -18,7 +18,7 @@ Signed-off-by: John Crispin --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -553,6 +553,16 @@ config I2C_KEMPLD +@@ -554,6 +554,16 @@ config I2C_KEMPLD This driver can also be built as a module. If so, the module will be called i2c-kempld. diff --git a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch b/target/linux/lantiq/patches-3.18/0101-mtd-split.patch index 6753a2156c..6152e0e211 100644 --- a/target/linux/lantiq/patches-3.18/0101-mtd-split.patch +++ b/target/linux/lantiq/patches-3.18/0101-mtd-split.patch @@ -164,7 +164,7 @@ enum mtd_parser_type type, --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c -@@ -627,7 +627,7 @@ out_register: +@@ -628,7 +628,7 @@ out_register: } @@ -173,7 +173,7 @@ __mtd_add_partition(struct mtd_info *master, const char *name, long long offset, long long length, bool dup_check) { -@@ -748,7 +748,7 @@ run_parsers_by_type(struct mtd_part *sla +@@ -749,7 +749,7 @@ run_parsers_by_type(struct mtd_part *sla return nr_parts; } @@ -182,7 +182,7 @@ mtd_pad_erasesize(struct mtd_info *mtd, int offset, int len) { unsigned long mask = mtd->erasesize - 1; -@@ -818,7 +818,6 @@ static void split_uimage(struct mtd_info +@@ -819,7 +819,6 @@ static void split_uimage(struct mtd_info return; len = be32_to_cpu(hdr.size) + 0x40; diff --git a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch index 5a7d416726..2448d0ab31 100644 --- a/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch +++ b/target/linux/ramips/patches-3.18/0037-USB-phy-add-ralink-SoC-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig -@@ -239,6 +239,11 @@ +@@ -239,6 +239,11 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. @@ -14,7 +14,7 @@ depends on RESET_CONTROLLER --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile -@@ -31,3 +31,4 @@ +@@ -31,3 +31,4 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o diff --git a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch index 8ed061070a..0cf554265e 100644 --- a/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch +++ b/target/linux/ramips/patches-3.18/0052-i2c-MIPS-adds-ralink-I2C-driver.patch @@ -45,7 +45,7 @@ Signed-off-by: John Crispin +}; --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -710,6 +710,10 @@ config I2C_RK3X +@@ -711,6 +711,10 @@ config I2C_RK3X This driver can also be built as a module. If so, the module will be called i2c-rk3x. diff --git a/target/linux/ramips/patches-3.18/0060-soc_type.patch b/target/linux/ramips/patches-3.18/0060-soc_type.patch index 292a4ad456..41cc1208c3 100644 --- a/target/linux/ramips/patches-3.18/0060-soc_type.patch +++ b/target/linux/ramips/patches-3.18/0060-soc_type.patch @@ -219,7 +219,7 @@ { --- a/arch/mips/ralink/mt7621.c +++ b/arch/mips/ralink/mt7621.c -@@ -176,6 +176,7 @@ void prom_soc_init(struct ralink_soc_inf +@@ -193,6 +193,7 @@ void prom_soc_init(struct ralink_soc_inf soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN; soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX; soc_info->mem_base = MT7621_DRAM_BASE; diff --git a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch index 15f5ee8378..98e8ca5a49 100644 --- a/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch +++ b/target/linux/ramips/patches-3.18/0062-mt7621-add-ECHI-OCHI-XCHI-support.patch @@ -5546,7 +5546,7 @@ ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); -@@ -4451,8 +4597,14 @@ static u16 xhci_call_host_update_timeout +@@ -4454,8 +4600,14 @@ static u16 xhci_call_host_update_timeout u16 *timeout) { if (state == USB3_LPM_U1) @@ -5561,7 +5561,7 @@ return xhci_calculate_u2_timeout(xhci, udev, desc); return USB3_LPM_DISABLED; -@@ -4837,7 +4989,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, +@@ -4840,7 +4992,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, hcd->self.no_sg_constraint = 1; /* XHCI controllers don't stop the ep queue on short packets :| */ @@ -5571,7 +5571,7 @@ if (usb_hcd_is_primary_hcd(hcd)) { xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); -@@ -4900,6 +5054,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, +@@ -4903,6 +5057,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, goto error; xhci_dbg(xhci, "Reset complete\n"); @@ -5582,7 +5582,7 @@ /* Set dma_mask and coherent_dma_mask to 64-bits, * if xHC supports 64-bit addressing */ if (HCC_64BIT_ADDR(xhci->hcc_params) && -@@ -4994,8 +5152,57 @@ MODULE_DESCRIPTION(DRIVER_DESC); +@@ -4997,8 +5155,57 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_LICENSE("GPL"); diff --git a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch b/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch index 42c04aef96..520c570ee2 100644 --- a/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch +++ b/target/linux/ramips/patches-3.18/0065-fix_dts_cache_issues.patch @@ -1,6 +1,6 @@ --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c -@@ -675,7 +675,6 @@ +@@ -675,7 +675,6 @@ static void __init arch_mem_init(char ** crashk_res.end - crashk_res.start + 1, BOOTMEM_DEFAULT); #endif @@ -8,7 +8,7 @@ sparse_init(); plat_swiotlb_setup(); paging_init(); -@@ -784,6 +783,7 @@ +@@ -784,6 +783,7 @@ void __init setup_arch(char **cmdline_p) prefill_possible_map(); cpu_cache_init(); diff --git a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch b/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch index b34581ed63..9b9a72bc7b 100644 --- a/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch +++ b/target/linux/ramips/patches-3.18/0074-i2c-MIPS-add-mt7621-I2C-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig -@@ -714,6 +714,10 @@ config I2C_RALINK +@@ -715,6 +715,10 @@ config I2C_RALINK tristate "Ralink I2C Controller" select OF_I2C diff --git a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch index 32cea7ded9..81702c28e8 100644 --- a/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch +++ b/target/linux/ramips/patches-3.18/0100-mtd-split-remove-padding.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c -@@ -818,9 +818,6 @@ static void split_uimage(struct mtd_info +@@ -819,9 +819,6 @@ static void split_uimage(struct mtd_info return; len = be32_to_cpu(hdr.size) + 0x40; diff --git a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch index 6f6458fc1c..50b88dbcd3 100644 --- a/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch +++ b/target/linux/ramips/patches-3.18/0101-mtd-add-rtn56u-support.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c -@@ -806,8 +806,11 @@ static void split_uimage(struct mtd_info +@@ -807,8 +807,11 @@ static void split_uimage(struct mtd_info { struct { __be32 magic; @@ -13,7 +13,7 @@ } hdr; size_t len; -@@ -817,7 +820,10 @@ static void split_uimage(struct mtd_info +@@ -818,7 +821,10 @@ static void split_uimage(struct mtd_info if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC)) return; -- cgit v1.2.3