From 7acbd52055067c246a9f87b62b4df5f74293204b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 7 Jul 2015 08:05:50 +0000 Subject: ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531) The initialization routines for these boards were relying on some (wrong) defaults for the QCA953x ethernet. Make these defaults explicit to prevent breaking them when the QCA953x defaults are fixed. Signed-off-by: Matthias Schiffer SVN-Revision: 46206 --- target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c | 6 ++++++ target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c | 7 +++++++ 2 files changed, 13 insertions(+) (limited to 'target') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c index c28afc6ceb..3e5c2a2522 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c @@ -109,12 +109,18 @@ static void __init tl_ap143_setup(void) ath79_register_mdio(0, 0x0); /* LAN */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_switch_data.phy_poll_mask |= BIT(4); ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); ath79_register_eth(1); /* WAN */ ath79_switch_data.phy4_mii_en = 1; ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.phy_mask = BIT(4); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); ath79_register_eth(0); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c index bc13d7019f..e665a2e993 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c @@ -105,12 +105,19 @@ static void __init common_setup(void) ath79_register_mdio(0, 0x0); /* LAN */ + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.phy_mask = BIT(4); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); ath79_register_eth(0); /* WAN */ ath79_switch_data.phy4_mii_en = 1; + ath79_eth1_data.duplex = DUPLEX_FULL; ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth1_data.speed = SPEED_100; + ath79_switch_data.phy_poll_mask |= BIT(4); ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1); ath79_register_eth(1); -- cgit v1.2.3