From 56d64d8b5a47a2ce076661564c696445a5721338 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 13 Jan 2021 07:41:34 +0100 Subject: bcm4908: backport PMB (Power Management Bus) driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki --- target/linux/bcm4908/config-5.4 | 6 + ...ngs-power-document-Broadcom-s-PMB-binding.patch | 90 +++++ ...-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch | 406 +++++++++++++++++++++ 3 files changed, 502 insertions(+) create mode 100644 target/linux/bcm4908/patches-5.4/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch create mode 100644 target/linux/bcm4908/patches-5.4/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch (limited to 'target') diff --git a/target/linux/bcm4908/config-5.4 b/target/linux/bcm4908/config-5.4 index df20191ac8..d3d9e0f7b6 100644 --- a/target/linux/bcm4908/config-5.4 +++ b/target/linux/bcm4908/config-5.4 @@ -37,7 +37,9 @@ CONFIG_ARM_PSCI_FW=y CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y CONFIG_BCM7XXX_PHY=y CONFIG_BCM_NET_PHYLIB=y +CONFIG_BCM_PMB=y # CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_PM=y CONFIG_CAVIUM_TX2_ERRATUM_219=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLONE_BACKWARDS=y @@ -140,6 +142,10 @@ CONFIG_PARTITION_PERCPU=y CONFIG_PGTABLE_LEVELS=3 CONFIG_PHYLIB=y CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PM=y +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +CONFIG_PM_GENERIC_DOMAINS_OF=y CONFIG_POWER_RESET=y CONFIG_POWER_RESET_SYSCON=y CONFIG_POWER_SUPPLY=y diff --git a/target/linux/bcm4908/patches-5.4/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch b/target/linux/bcm4908/patches-5.4/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch new file mode 100644 index 0000000000..c5c1a5dc7e --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/082-v5.12-0001-dt-bindings-power-document-Broadcom-s-PMB-binding.patch @@ -0,0 +1,90 @@ +From 82853543057f78d8a331272b70bc3f1e8cb0cbf4 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 14 Dec 2020 19:07:42 +0100 +Subject: [PATCH] dt-bindings: power: document Broadcom's PMB binding +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Broadcom's PMB is power controller used for disabling and enabling SoC +devices. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Rob Herring +Acked-by: Florian Fainelli +Acked-by: Ulf Hansson +Signed-off-by: Florian Fainelli +--- + .../bindings/power/brcm,bcm-pmb.yaml | 50 +++++++++++++++++++ + include/dt-bindings/soc/bcm-pmb.h | 11 ++++ + 2 files changed, 61 insertions(+) + create mode 100644 Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml + create mode 100644 include/dt-bindings/soc/bcm-pmb.h + +--- /dev/null ++++ b/Documentation/devicetree/bindings/power/brcm,bcm-pmb.yaml +@@ -0,0 +1,50 @@ ++# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause ++%YAML 1.2 ++--- ++$id: http://devicetree.org/schemas/power/brcm,bcm-pmb.yaml# ++$schema: http://devicetree.org/meta-schemas/core.yaml# ++ ++title: Broadcom PMB (Power Management Bus) controller ++ ++description: This document describes Broadcom's PMB controller. It supports ++ powering various types of connected devices (e.g. PCIe, USB, SATA). ++ ++maintainers: ++ - Rafał Miłecki ++ ++properties: ++ compatible: ++ enum: ++ - brcm,bcm4908-pmb ++ ++ reg: ++ description: register space of one or more buses ++ maxItems: 1 ++ ++ big-endian: ++ $ref: /schemas/types.yaml#/definitions/flag ++ description: Flag to use for block working in big endian mode. ++ ++ "#power-domain-cells": ++ description: cell specifies device ID (see bcm-pmb.h) ++ const: 1 ++ ++required: ++ - reg ++ - "#power-domain-cells" ++ ++additionalProperties: false ++ ++examples: ++ - | ++ #include ++ ++ pmb: power-controller@802800e0 { ++ compatible = "brcm,bcm4908-pmb"; ++ reg = <0x802800e0 0x40>; ++ #power-domain-cells = <1>; ++ }; ++ ++ foo { ++ power-domains = <&pmb BCM_PMB_PCIE0>; ++ }; +--- /dev/null ++++ b/include/dt-bindings/soc/bcm-pmb.h +@@ -0,0 +1,11 @@ ++/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT */ ++ ++#ifndef __DT_BINDINGS_SOC_BCM_PMB_H ++#define __DT_BINDINGS_SOC_BCM_PMB_H ++ ++#define BCM_PMB_PCIE0 0x01 ++#define BCM_PMB_PCIE1 0x02 ++#define BCM_PMB_PCIE2 0x03 ++#define BCM_PMB_HOST_USB 0x04 ++ ++#endif diff --git a/target/linux/bcm4908/patches-5.4/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch b/target/linux/bcm4908/patches-5.4/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch new file mode 100644 index 0000000000..e462174ca6 --- /dev/null +++ b/target/linux/bcm4908/patches-5.4/082-v5.12-0002-soc-bcm-add-PM-driver-for-Broadcom-s-PMB.patch @@ -0,0 +1,406 @@ +From 8bcac4011ebe0dbdd46fd55b036ee855c95702d3 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 14 Dec 2020 19:07:43 +0100 +Subject: [PATCH] soc: bcm: add PM driver for Broadcom's PMB +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +PMB originally comes from BCM63138 but can be also found on many other +chipsets (e.g. BCM4908). It's needed to power on and off SoC blocks like +PCIe, SATA, USB. + +Signed-off-by: Rafał Miłecki +Acked-by: Ulf Hansson +Signed-off-by: Florian Fainelli +--- + MAINTAINERS | 10 + + drivers/soc/bcm/Makefile | 2 +- + drivers/soc/bcm/bcm63xx/Kconfig | 9 + + drivers/soc/bcm/bcm63xx/Makefile | 1 + + drivers/soc/bcm/bcm63xx/bcm-pmb.c | 333 ++++++++++++++++++++++++++++++ + 5 files changed, 354 insertions(+), 1 deletion(-) + create mode 100644 drivers/soc/bcm/bcm63xx/bcm-pmb.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -3405,6 +3405,16 @@ L: linux-mips@vger.kernel.org + S: Maintained + F: drivers/firmware/broadcom/* + ++BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER ++M: Rafał Miłecki ++M: Florian Fainelli ++M: bcm-kernel-feedback-list@broadcom.com ++L: linux-pm@vger.kernel.org ++S: Maintained ++T: git git://github.com/broadcom/stblinux.git ++F: drivers/soc/bcm/bcm-pmb.c ++F: include/dt-bindings/soc/bcm-pmb.h ++ + BROADCOM SPECIFIC AMBA DRIVER (BCMA) + M: Rafał Miłecki + L: linux-wireless@vger.kernel.org +--- /dev/null ++++ b/drivers/soc/bcm/bcm63xx/Kconfig +@@ -0,0 +1,9 @@ ++# SPDX-License-Identifier: GPL-2.0-only ++config BCM_PMB ++ bool "Broadcom PMB (Power Management Bus) driver" ++ depends on ARCH_BCM4908 || (COMPILE_TEST && OF) ++ default ARCH_BCM4908 ++ select PM_GENERIC_DOMAINS if PM ++ help ++ This enables support for the Broadcom's PMB (Power Management Bus) that ++ is used for disabling and enabling SoC devices. +--- /dev/null ++++ b/drivers/soc/bcm/bcm63xx/Makefile +@@ -0,0 +1,2 @@ ++# SPDX-License-Identifier: GPL-2.0-only ++obj-$(CONFIG_BCM_PMB) += bcm-pmb.o +--- /dev/null ++++ b/drivers/soc/bcm/bcm63xx/bcm-pmb.c +@@ -0,0 +1,333 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later ++/* ++ * Copyright (c) 2013 Broadcom ++ * Copyright (C) 2020 Rafał Miłecki ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define BPCM_ID_REG 0x00 ++#define BPCM_CAPABILITIES 0x04 ++#define BPCM_CAP_NUM_ZONES 0x000000ff ++#define BPCM_CAP_SR_REG_BITS 0x0000ff00 ++#define BPCM_CAP_PLLTYPE 0x00030000 ++#define BPCM_CAP_UBUS 0x00080000 ++#define BPCM_CONTROL 0x08 ++#define BPCM_STATUS 0x0c ++#define BPCM_ROSC_CONTROL 0x10 ++#define BPCM_ROSC_THRESH_H 0x14 ++#define BPCM_ROSC_THRESHOLD_BCM6838 0x14 ++#define BPCM_ROSC_THRESH_S 0x18 ++#define BPCM_ROSC_COUNT_BCM6838 0x18 ++#define BPCM_ROSC_COUNT 0x1c ++#define BPCM_PWD_CONTROL_BCM6838 0x1c ++#define BPCM_PWD_CONTROL 0x20 ++#define BPCM_SR_CONTROL_BCM6838 0x20 ++#define BPCM_PWD_ACCUM_CONTROL 0x24 ++#define BPCM_SR_CONTROL 0x28 ++#define BPCM_GLOBAL_CONTROL 0x2c ++#define BPCM_MISC_CONTROL 0x30 ++#define BPCM_MISC_CONTROL2 0x34 ++#define BPCM_SGPHY_CNTL 0x38 ++#define BPCM_SGPHY_STATUS 0x3c ++#define BPCM_ZONE0 0x40 ++#define BPCM_ZONE_CONTROL 0x00 ++#define BPCM_ZONE_CONTROL_MANUAL_CLK_EN 0x00000001 ++#define BPCM_ZONE_CONTROL_MANUAL_RESET_CTL 0x00000002 ++#define BPCM_ZONE_CONTROL_FREQ_SCALE_USED 0x00000004 /* R/O */ ++#define BPCM_ZONE_CONTROL_DPG_CAPABLE 0x00000008 /* R/O */ ++#define BPCM_ZONE_CONTROL_MANUAL_MEM_PWR 0x00000030 ++#define BPCM_ZONE_CONTROL_MANUAL_ISO_CTL 0x00000040 ++#define BPCM_ZONE_CONTROL_MANUAL_CTL 0x00000080 ++#define BPCM_ZONE_CONTROL_DPG_CTL_EN 0x00000100 ++#define BPCM_ZONE_CONTROL_PWR_DN_REQ 0x00000200 ++#define BPCM_ZONE_CONTROL_PWR_UP_REQ 0x00000400 ++#define BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN 0x00000800 ++#define BPCM_ZONE_CONTROL_BLK_RESET_ASSERT 0x00001000 ++#define BPCM_ZONE_CONTROL_MEM_STBY 0x00002000 ++#define BPCM_ZONE_CONTROL_RESERVED 0x0007c000 ++#define BPCM_ZONE_CONTROL_PWR_CNTL_STATE 0x00f80000 ++#define BPCM_ZONE_CONTROL_FREQ_SCALAR_DYN_SEL 0x01000000 /* R/O */ ++#define BPCM_ZONE_CONTROL_PWR_OFF_STATE 0x02000000 /* R/O */ ++#define BPCM_ZONE_CONTROL_PWR_ON_STATE 0x04000000 /* R/O */ ++#define BPCM_ZONE_CONTROL_PWR_GOOD 0x08000000 /* R/O */ ++#define BPCM_ZONE_CONTROL_DPG_PWR_STATE 0x10000000 /* R/O */ ++#define BPCM_ZONE_CONTROL_MEM_PWR_STATE 0x20000000 /* R/O */ ++#define BPCM_ZONE_CONTROL_ISO_STATE 0x40000000 /* R/O */ ++#define BPCM_ZONE_CONTROL_RESET_STATE 0x80000000 /* R/O */ ++#define BPCM_ZONE_CONFIG1 0x04 ++#define BPCM_ZONE_CONFIG2 0x08 ++#define BPCM_ZONE_FREQ_SCALAR_CONTROL 0x0c ++#define BPCM_ZONE_SIZE 0x10 ++ ++struct bcm_pmb { ++ struct device *dev; ++ void __iomem *base; ++ spinlock_t lock; ++ bool little_endian; ++ struct genpd_onecell_data genpd_onecell_data; ++}; ++ ++struct bcm_pmb_pd_data { ++ const char * const name; ++ int id; ++ u8 bus; ++ u8 device; ++}; ++ ++struct bcm_pmb_pm_domain { ++ struct bcm_pmb *pmb; ++ const struct bcm_pmb_pd_data *data; ++ struct generic_pm_domain genpd; ++}; ++ ++static int bcm_pmb_bpcm_read(struct bcm_pmb *pmb, int bus, u8 device, ++ int offset, u32 *val) ++{ ++ void __iomem *base = pmb->base + bus * 0x20; ++ unsigned long flags; ++ int err; ++ ++ spin_lock_irqsave(&pmb->lock, flags); ++ err = bpcm_rd(base, device, offset, val); ++ spin_unlock_irqrestore(&pmb->lock, flags); ++ ++ if (!err) ++ *val = pmb->little_endian ? le32_to_cpu(*val) : be32_to_cpu(*val); ++ ++ return err; ++} ++ ++static int bcm_pmb_bpcm_write(struct bcm_pmb *pmb, int bus, u8 device, ++ int offset, u32 val) ++{ ++ void __iomem *base = pmb->base + bus * 0x20; ++ unsigned long flags; ++ int err; ++ ++ val = pmb->little_endian ? cpu_to_le32(val) : cpu_to_be32(val); ++ ++ spin_lock_irqsave(&pmb->lock, flags); ++ err = bpcm_wr(base, device, offset, val); ++ spin_unlock_irqrestore(&pmb->lock, flags); ++ ++ return err; ++} ++ ++static int bcm_pmb_power_off_zone(struct bcm_pmb *pmb, int bus, u8 device, ++ int zone) ++{ ++ int offset; ++ u32 val; ++ int err; ++ ++ offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL; ++ ++ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val); ++ if (err) ++ return err; ++ ++ val |= BPCM_ZONE_CONTROL_PWR_DN_REQ; ++ val &= ~BPCM_ZONE_CONTROL_PWR_UP_REQ; ++ ++ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val); ++ ++ return err; ++} ++ ++static int bcm_pmb_power_on_zone(struct bcm_pmb *pmb, int bus, u8 device, ++ int zone) ++{ ++ int offset; ++ u32 val; ++ int err; ++ ++ offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL; ++ ++ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val); ++ if (err) ++ return err; ++ ++ if (!(val & BPCM_ZONE_CONTROL_PWR_ON_STATE)) { ++ val &= ~BPCM_ZONE_CONTROL_PWR_DN_REQ; ++ val |= BPCM_ZONE_CONTROL_DPG_CTL_EN; ++ val |= BPCM_ZONE_CONTROL_PWR_UP_REQ; ++ val |= BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN; ++ val |= BPCM_ZONE_CONTROL_BLK_RESET_ASSERT; ++ ++ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val); ++ } ++ ++ return err; ++} ++ ++static int bcm_pmb_power_off_device(struct bcm_pmb *pmb, int bus, u8 device) ++{ ++ int offset; ++ u32 val; ++ int err; ++ ++ /* Entire device can be powered off by powering off the 0th zone */ ++ offset = BPCM_ZONE0 + BPCM_ZONE_CONTROL; ++ ++ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val); ++ if (err) ++ return err; ++ ++ if (!(val & BPCM_ZONE_CONTROL_PWR_OFF_STATE)) { ++ val = BPCM_ZONE_CONTROL_PWR_DN_REQ; ++ ++ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val); ++ } ++ ++ return err; ++} ++ ++static int bcm_pmb_power_on_device(struct bcm_pmb *pmb, int bus, u8 device) ++{ ++ u32 val; ++ int err; ++ int i; ++ ++ err = bcm_pmb_bpcm_read(pmb, bus, device, BPCM_CAPABILITIES, &val); ++ if (err) ++ return err; ++ ++ for (i = 0; i < (val & BPCM_CAP_NUM_ZONES); i++) { ++ err = bcm_pmb_power_on_zone(pmb, bus, device, i); ++ if (err) ++ return err; ++ } ++ ++ return err; ++} ++ ++static int bcm_pmb_power_on(struct generic_pm_domain *genpd) ++{ ++ struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd); ++ const struct bcm_pmb_pd_data *data = pd->data; ++ struct bcm_pmb *pmb = pd->pmb; ++ ++ switch (data->id) { ++ case BCM_PMB_PCIE0: ++ case BCM_PMB_PCIE1: ++ case BCM_PMB_PCIE2: ++ return bcm_pmb_power_on_zone(pmb, data->bus, data->device, 0); ++ case BCM_PMB_HOST_USB: ++ return bcm_pmb_power_on_device(pmb, data->bus, data->device); ++ default: ++ dev_err(pmb->dev, "unsupported device id: %d\n", data->id); ++ return -EINVAL; ++ } ++} ++ ++static int bcm_pmb_power_off(struct generic_pm_domain *genpd) ++{ ++ struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd); ++ const struct bcm_pmb_pd_data *data = pd->data; ++ struct bcm_pmb *pmb = pd->pmb; ++ ++ switch (data->id) { ++ case BCM_PMB_PCIE0: ++ case BCM_PMB_PCIE1: ++ case BCM_PMB_PCIE2: ++ return bcm_pmb_power_off_zone(pmb, data->bus, data->device, 0); ++ case BCM_PMB_HOST_USB: ++ return bcm_pmb_power_off_device(pmb, data->bus, data->device); ++ default: ++ dev_err(pmb->dev, "unsupported device id: %d\n", data->id); ++ return -EINVAL; ++ } ++} ++ ++static int bcm_pmb_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ const struct bcm_pmb_pd_data *table; ++ const struct bcm_pmb_pd_data *e; ++ struct resource *res; ++ struct bcm_pmb *pmb; ++ int max_id; ++ int err; ++ ++ pmb = devm_kzalloc(dev, sizeof(*pmb), GFP_KERNEL); ++ if (!pmb) ++ return -ENOMEM; ++ ++ pmb->dev = dev; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ pmb->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(pmb->base)) ++ return PTR_ERR(pmb->base); ++ ++ spin_lock_init(&pmb->lock); ++ ++ pmb->little_endian = !of_device_is_big_endian(dev->of_node); ++ ++ table = of_device_get_match_data(dev); ++ if (!table) ++ return -EINVAL; ++ ++ max_id = 0; ++ for (e = table; e->name; e++) ++ max_id = max(max_id, e->id); ++ ++ pmb->genpd_onecell_data.num_domains = max_id + 1; ++ pmb->genpd_onecell_data.domains = ++ devm_kcalloc(dev, pmb->genpd_onecell_data.num_domains, ++ sizeof(struct generic_pm_domain *), GFP_KERNEL); ++ if (!pmb->genpd_onecell_data.domains) ++ return -ENOMEM; ++ ++ for (e = table; e->name; e++) { ++ struct bcm_pmb_pm_domain *pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); ++ ++ pd->pmb = pmb; ++ pd->data = e; ++ pd->genpd.name = e->name; ++ pd->genpd.power_on = bcm_pmb_power_on; ++ pd->genpd.power_off = bcm_pmb_power_off; ++ ++ pm_genpd_init(&pd->genpd, NULL, true); ++ pmb->genpd_onecell_data.domains[e->id] = &pd->genpd; ++ } ++ ++ err = of_genpd_add_provider_onecell(dev->of_node, &pmb->genpd_onecell_data); ++ if (err) { ++ dev_err(dev, "failed to add genpd provider: %d\n", err); ++ return err; ++ } ++ ++ return 0; ++} ++ ++static const struct bcm_pmb_pd_data bcm_pmb_bcm4908_data[] = { ++ { .name = "pcie2", .id = BCM_PMB_PCIE2, .bus = 0, .device = 2, }, ++ { .name = "pcie0", .id = BCM_PMB_PCIE0, .bus = 1, .device = 14, }, ++ { .name = "pcie1", .id = BCM_PMB_PCIE1, .bus = 1, .device = 15, }, ++ { .name = "usb", .id = BCM_PMB_HOST_USB, .bus = 1, .device = 17, }, ++ { }, ++}; ++ ++static const struct of_device_id bcm_pmb_of_match[] = { ++ { .compatible = "brcm,bcm4908-pmb", .data = &bcm_pmb_bcm4908_data, }, ++ { }, ++}; ++ ++static struct platform_driver bcm_pmb_driver = { ++ .driver = { ++ .name = "bcm-pmb", ++ .of_match_table = bcm_pmb_of_match, ++ }, ++ .probe = bcm_pmb_probe, ++}; ++ ++builtin_platform_driver(bcm_pmb_driver); +--- a/drivers/soc/bcm/Kconfig ++++ b/drivers/soc/bcm/Kconfig +@@ -33,6 +33,7 @@ config SOC_BRCMSTB + + If unsure, say N. + ++source "drivers/soc/bcm/bcm63xx/Kconfig" + source "drivers/soc/bcm/brcmstb/Kconfig" + + endmenu -- cgit v1.2.3