From 3a2e735b966586b930ac0f0b1d662d72ac4e7bc8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sat, 18 Mar 2017 18:31:36 +0100 Subject: bcm53xx: backport BCM5301X patches MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes GIC interrupts (required before switching to 4.9), adds few new entires & introduces DTS for Archer C5. Signed-off-by: Rafał Miłecki --- ...53573-Don-t-use-nonexistent-default-off-L.patch | 50 ++ ...5301X-Don-t-use-nonexistent-default-off-L.patch | 651 +++++++++++++++++++++ ...-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch | 41 ++ ...ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch | 40 ++ ...RM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch | 34 ++ ...5301X-Add-support-for-TP-LINK-Archer-C5-V.patch | 130 ++++ ...-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch | 27 + ...301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch | 2 +- ...-Add-power-button-for-Buffalo-WZR-1750DHP.patch | 2 +- ...53573-Don-t-use-nonexistent-default-off-L.patch | 50 ++ ...5301X-Don-t-use-nonexistent-default-off-L.patch | 651 +++++++++++++++++++++ ...-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch | 41 ++ ...ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch | 40 ++ ...RM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch | 34 ++ ...5301X-Add-support-for-TP-LINK-Archer-C5-V.patch | 130 ++++ ...-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch | 27 + ...310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch | 2 +- ...-Add-power-button-for-Buffalo-WZR-1750DHP.patch | 2 +- 18 files changed, 1950 insertions(+), 4 deletions(-) create mode 100644 target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch create mode 100644 target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch create mode 100644 target/linux/bcm53xx/patches-4.4/047-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch create mode 100644 target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch create mode 100644 target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch create mode 100644 target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch create mode 100644 target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch create mode 100644 target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch create mode 100644 target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch create mode 100644 target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch create mode 100644 target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch create mode 100644 target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch create mode 100644 target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch create mode 100644 target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch (limited to 'target') diff --git a/target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch new file mode 100644 index 0000000000..ce74ff3e4c --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/047-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch @@ -0,0 +1,50 @@ +From 820a3e952b266d4355e89ed91c9b11945030321e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 8 Mar 2017 07:41:04 +0100 +Subject: [PATCH] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED + trigger +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Such a trigger doesn't exist in Linux and is not needed as LED is being +turned off by default. This could cause errors in LEDs core code when +trying to set default trigger. + +Signed-off-by: Rafał Miłecki +Acked-by: Pavel Machek +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ---- + 1 file changed, 4 deletions(-) + +--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts ++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +@@ -26,19 +26,16 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + system { +@@ -54,7 +51,6 @@ + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + diff --git a/target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch new file mode 100644 index 0000000000..cecae0bb7b --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/047-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch @@ -0,0 +1,651 @@ +From 0b660259e927177dc0c6eb3b1c39f23c6a011c5f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 8 Mar 2017 07:41:05 +0100 +Subject: [PATCH] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED + trigger +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Such a trigger doesn't exist in Linux and is not needed as LED is being +turned off by default. This could cause errors in LEDs core code when +trying to set default trigger. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 5 ----- + arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 2 -- + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 ----- + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 --- + arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 --- + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 ---------- + arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 -- + arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ---- + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 -- + arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 -------- + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 7 ------- + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 9 --------- + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 -------- + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ------ + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 -------- + arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 ------ + 16 files changed, 88 deletions(-) + +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +@@ -41,19 +41,16 @@ + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power { +@@ -71,14 +68,12 @@ + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +@@ -41,7 +41,6 @@ + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power { +@@ -59,7 +58,6 @@ + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -52,13 +52,11 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power0 { + label = "bcm53xx:red:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power1 { +@@ -76,7 +74,6 @@ + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan { +@@ -88,13 +85,11 @@ + wireless0 { + label = "bcm53xx:blue:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -43,19 +43,16 @@ + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +@@ -47,7 +47,6 @@ + power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power1 { +@@ -59,13 +58,11 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -37,61 +37,51 @@ + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3-green { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + status-red { + label = "bcm53xx:red:status"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + status-green { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + status-blue { + label = "bcm53xx:blue:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-red { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts ++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +@@ -47,7 +47,6 @@ + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan { +@@ -65,7 +64,6 @@ + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -68,7 +68,6 @@ + power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + router0 { +@@ -80,7 +79,6 @@ + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan { +@@ -92,13 +90,11 @@ + wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +@@ -41,7 +41,6 @@ + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power { +@@ -53,7 +52,6 @@ + wan { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -31,13 +31,11 @@ + usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power-white { +@@ -49,37 +47,31 @@ + router-amber { + label = "bcm53xx:amber:router"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + router-white { + label = "bcm53xx:white:router"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless-amber { + label = "bcm53xx:amber:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless-white { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +@@ -47,43 +47,36 @@ + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -47,7 +47,6 @@ + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan-white { +@@ -59,49 +58,41 @@ + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -26,49 +26,41 @@ + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-blue { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power { +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -56,37 +56,31 @@ + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -34,37 +34,31 @@ + lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + status { +@@ -76,13 +70,11 @@ + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts ++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +@@ -34,37 +34,31 @@ + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + diff --git a/target/linux/bcm53xx/patches-4.4/047-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch b/target/linux/bcm53xx/patches-4.4/047-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch new file mode 100644 index 0000000000..70df2013cc --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/047-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch @@ -0,0 +1,41 @@ +From 0e34079cd1f674449749aafe4be07336177de90d Mon Sep 17 00:00:00 2001 +From: Jon Mason +Date: Thu, 2 Mar 2017 19:21:32 -0500 +Subject: [PATCH] ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +GIC_PPI flags were misconfigured for the timers, resulting in errors +like: +[ 0.000000] GIC: PPI11 is secure or misconfigured + +Changing them to being edge triggered corrects the issue + +Suggested-by: Rafał Miłecki +Signed-off-by: Jon Mason +Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC") +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -66,14 +66,14 @@ + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; +- interrupts = ; ++ interrupts = ; + clocks = <&periph_clk>; + }; + + local-timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x100>; +- interrupts = ; ++ interrupts = ; + clocks = <&periph_clk>; + }; + diff --git a/target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch b/target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch new file mode 100644 index 0000000000..b112cba682 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/047-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch @@ -0,0 +1,40 @@ +From f22c635e585471d01a38b829c0753c1467b5058e Mon Sep 17 00:00:00 2001 +From: Jon Mason +Date: Mon, 6 Mar 2017 11:24:44 -0500 +Subject: [PATCH] ARM: dts: BCM5301X: Add TWD WD Support to DT + +Add support for the ARM TWD Watchdog to the bcm5301x device tree. The +ARM TWD timer allocated the register space for the WDT, so this patch +necessitated shrinking that. Also, the GIC masks were added for these. + +Signed-off-by: Jon Mason +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 15 ++++++++++++--- + 1 file changed, 12 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -70,10 +70,19 @@ + clocks = <&periph_clk>; + }; + +- local-timer@20600 { ++ timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; +- reg = <0x20600 0x100>; +- interrupts = ; ++ reg = <0x20600 0x20>; ++ interrupts = ; ++ clocks = <&periph_clk>; ++ }; ++ ++ watchdog@20620 { ++ compatible = "arm,cortex-a9-twd-wdt"; ++ reg = <0x20620 0x20>; ++ interrupts = ; + clocks = <&periph_clk>; + }; + diff --git a/target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch b/target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch new file mode 100644 index 0000000000..d233e06817 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/047-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch @@ -0,0 +1,34 @@ +From bb097e3e00457bd69ad3a767f6b99424e2e06411 Mon Sep 17 00:00:00 2001 +From: Jon Mason +Date: Mon, 6 Mar 2017 11:24:45 -0500 +Subject: [PATCH] ARM: dts: BCM5301X: Add I2C support to the DT + +Add I2C support to the bcm5301x Device Tree. Since no driver changes +are needed to enable this hardware, only the device tree changes are +required to make this functional. + +Signed-off-by: Jon Mason +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -338,6 +338,16 @@ + }; + }; + ++ i2c0: i2c@18009000 { ++ compatible = "brcm,iproc-i2c"; ++ reg = <0x18009000 0x50>; ++ interrupts = ; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ clock-frequency = <100000>; ++ status = "disabled"; ++ }; ++ + lcpll0: lcpll0@1800c100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; diff --git a/target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch b/target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch new file mode 100644 index 0000000000..db8fdb525d --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/047-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch @@ -0,0 +1,130 @@ +From d6661da842bbeec2082b7263c9e682792e7951a9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 14 Mar 2017 11:39:41 +0100 +Subject: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless +chipsets. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 98 ++++++++++++++++++++++ + 2 files changed, 99 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm47081-buffalo-wzr-900dhp.dtb \ + bcm47081-luxul-xap-1410.dtb \ + bcm47081-luxul-xwr-1200.dtb \ ++ bcm47081-tplink-archer-c5-v2.dtb \ + bcm4709-asus-rt-ac87u.dtb \ + bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-linksys-ea9200.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +@@ -0,0 +1,98 @@ ++/* ++ * Copyright (C) 2017 Rafał Miłecki ++ * ++ * Licensed under the ISC license. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm47081.dtsi" ++ ++/ { ++ compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708"; ++ model = "TP-LINK Archer C5 V2"; ++ ++ chosen { ++ bootargs = "earlycon"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ 2ghz { ++ label = "bcm53xx:green:2ghz"; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ lan { ++ label = "bcm53xx:green:lan"; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ usb2-port1 { ++ label = "bcm53xx:green:usb2-port1"; ++ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ power { ++ label = "bcm53xx:green:power"; ++ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ wan-green { ++ label = "bcm53xx:green:wan"; ++ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wps { ++ label = "bcm53xx:green:wps"; ++ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wan-amber { ++ label = "bcm53xx:amber:wan"; ++ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ 5ghz { ++ label = "bcm53xx:green:5ghz"; ++ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ usb2-port2 { ++ label = "bcm53xx:green:usb2-port2"; ++ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rfkill { ++ label = "WiFi"; ++ linux,code = ; ++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; ++ }; ++ ++ restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&spi_nor { ++ status = "okay"; ++}; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; ++}; diff --git a/target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch b/target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch new file mode 100644 index 0000000000..781af7a527 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/047-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch @@ -0,0 +1,27 @@ +From a7996761d1dacbac10c892c16faa90dfe46affcd Mon Sep 17 00:00:00 2001 +From: Steve Lin +Date: Wed, 15 Mar 2017 16:59:35 -0400 +Subject: [PATCH] ARM: dts: BCM953012HR: Add ethernet aliases + +Adding ethernet aliases. These are used, for example, by bootloaders, +to modify the MAC addresses in the device tree. + +Signed-off-by: Steve Lin +Acked-by: Jon Mason +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm953012hr.dts | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/arm/boot/dts/bcm953012hr.dts ++++ b/arch/arm/boot/dts/bcm953012hr.dts +@@ -41,6 +41,9 @@ + + aliases { + serial0 = &uart0; ++ ethernet0 = &gmac0; ++ ethernet1 = &gmac1; ++ ethernet2 = &gmac2; + }; + + chosen { diff --git a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch index 859985c5f2..c780e22d6e 100644 --- a/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch +++ b/target/linux/bcm53xx/patches-4.4/301-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch @@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -80,6 +80,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ +@@ -81,6 +81,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-linksys-ea9200.dtb \ bcm4709-netgear-r7000.dtb \ diff --git a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch index e7262cb909..425c420da7 100644 --- a/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch +++ b/target/linux/bcm53xx/patches-4.4/332-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch @@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau --- --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -103,6 +103,12 @@ +@@ -98,6 +98,12 @@ #address-cells = <1>; #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch new file mode 100644 index 0000000000..ce74ff3e4c --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/033-0011-ARM-dts-BCM53573-Don-t-use-nonexistent-default-off-L.patch @@ -0,0 +1,50 @@ +From 820a3e952b266d4355e89ed91c9b11945030321e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 8 Mar 2017 07:41:04 +0100 +Subject: [PATCH] ARM: dts: BCM53573: Don't use nonexistent "default-off" LED + trigger +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Such a trigger doesn't exist in Linux and is not needed as LED is being +turned off by default. This could cause errors in LEDs core code when +trying to set default trigger. + +Signed-off-by: Rafał Miłecki +Acked-by: Pavel Machek +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 4 ---- + 1 file changed, 4 deletions(-) + +--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts ++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +@@ -26,19 +26,16 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + system { +@@ -54,7 +51,6 @@ + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + diff --git a/target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch b/target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch new file mode 100644 index 0000000000..cecae0bb7b --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/033-0012-ARM-dts-BCM5301X-Don-t-use-nonexistent-default-off-L.patch @@ -0,0 +1,651 @@ +From 0b660259e927177dc0c6eb3b1c39f23c6a011c5f Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 8 Mar 2017 07:41:05 +0100 +Subject: [PATCH] ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED + trigger +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Such a trigger doesn't exist in Linux and is not needed as LED is being +turned off by default. This could cause errors in LEDs core code when +trying to set default trigger. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 5 ----- + arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 2 -- + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 5 ----- + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 3 --- + arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 3 --- + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 10 ---------- + arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 2 -- + arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ---- + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 2 -- + arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 8 -------- + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 7 ------- + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 9 --------- + arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts | 8 -------- + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 6 ------ + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 8 -------- + arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 6 ------ + 16 files changed, 88 deletions(-) + +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +@@ -41,19 +41,16 @@ + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power { +@@ -71,14 +68,12 @@ + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +@@ -41,7 +41,6 @@ + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power { +@@ -59,7 +58,6 @@ + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -52,13 +52,11 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power0 { + label = "bcm53xx:red:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power1 { +@@ -76,7 +74,6 @@ + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan { +@@ -88,13 +85,11 @@ + wireless0 { + label = "bcm53xx:blue:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -43,19 +43,16 @@ + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +@@ -47,7 +47,6 @@ + power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power1 { +@@ -59,13 +58,11 @@ + usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -37,61 +37,51 @@ + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3-green { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + status-red { + label = "bcm53xx:red:status"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + status-green { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + status-blue { + label = "bcm53xx:blue:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-red { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts ++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +@@ -47,7 +47,6 @@ + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan { +@@ -65,7 +64,6 @@ + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -68,7 +68,6 @@ + power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + router0 { +@@ -80,7 +79,6 @@ + router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan { +@@ -92,13 +90,11 @@ + wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +@@ -41,7 +41,6 @@ + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power { +@@ -53,7 +52,6 @@ + wan { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -31,13 +31,11 @@ + usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power-white { +@@ -49,37 +47,31 @@ + router-amber { + label = "bcm53xx:amber:router"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + router-white { + label = "bcm53xx:white:router"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless-amber { + label = "bcm53xx:amber:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless-white { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +@@ -47,43 +47,36 @@ + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -47,7 +47,6 @@ + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan-white { +@@ -59,49 +58,41 @@ + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -26,49 +26,41 @@ + lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-blue { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; +- linux,default-trigger = "default-off"; + }; + + power { +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -56,37 +56,31 @@ + wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -34,37 +34,31 @@ + lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + status { +@@ -76,13 +70,11 @@ + 2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + +--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts ++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +@@ -34,37 +34,31 @@ + power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; +- linux,default-trigger = "default-off"; + }; + }; + diff --git a/target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch b/target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch new file mode 100644 index 0000000000..70df2013cc --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/033-0013-ARM-dts-BCM5301X-Correct-GIC_PPI-interrupt-flags.patch @@ -0,0 +1,41 @@ +From 0e34079cd1f674449749aafe4be07336177de90d Mon Sep 17 00:00:00 2001 +From: Jon Mason +Date: Thu, 2 Mar 2017 19:21:32 -0500 +Subject: [PATCH] ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +GIC_PPI flags were misconfigured for the timers, resulting in errors +like: +[ 0.000000] GIC: PPI11 is secure or misconfigured + +Changing them to being edge triggered corrects the issue + +Suggested-by: Rafał Miłecki +Signed-off-by: Jon Mason +Fixes: d27509f1 ("ARM: BCM5301X: add dts files for BCM4708 SoC") +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -66,14 +66,14 @@ + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; +- interrupts = ; ++ interrupts = ; + clocks = <&periph_clk>; + }; + + local-timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x20600 0x100>; +- interrupts = ; ++ interrupts = ; + clocks = <&periph_clk>; + }; + diff --git a/target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch b/target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch new file mode 100644 index 0000000000..b112cba682 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/033-0014-ARM-dts-BCM5301X-Add-TWD-WD-Support-to-DT.patch @@ -0,0 +1,40 @@ +From f22c635e585471d01a38b829c0753c1467b5058e Mon Sep 17 00:00:00 2001 +From: Jon Mason +Date: Mon, 6 Mar 2017 11:24:44 -0500 +Subject: [PATCH] ARM: dts: BCM5301X: Add TWD WD Support to DT + +Add support for the ARM TWD Watchdog to the bcm5301x device tree. The +ARM TWD timer allocated the register space for the WDT, so this patch +necessitated shrinking that. Also, the GIC masks were added for these. + +Signed-off-by: Jon Mason +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 15 ++++++++++++--- + 1 file changed, 12 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -70,10 +70,19 @@ + clocks = <&periph_clk>; + }; + +- local-timer@20600 { ++ timer@20600 { + compatible = "arm,cortex-a9-twd-timer"; +- reg = <0x20600 0x100>; +- interrupts = ; ++ reg = <0x20600 0x20>; ++ interrupts = ; ++ clocks = <&periph_clk>; ++ }; ++ ++ watchdog@20620 { ++ compatible = "arm,cortex-a9-twd-wdt"; ++ reg = <0x20620 0x20>; ++ interrupts = ; + clocks = <&periph_clk>; + }; + diff --git a/target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch b/target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch new file mode 100644 index 0000000000..d233e06817 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/033-0015-ARM-dts-BCM5301X-Add-I2C-support-to-the-DT.patch @@ -0,0 +1,34 @@ +From bb097e3e00457bd69ad3a767f6b99424e2e06411 Mon Sep 17 00:00:00 2001 +From: Jon Mason +Date: Mon, 6 Mar 2017 11:24:45 -0500 +Subject: [PATCH] ARM: dts: BCM5301X: Add I2C support to the DT + +Add I2C support to the bcm5301x Device Tree. Since no driver changes +are needed to enable this hardware, only the device tree changes are +required to make this functional. + +Signed-off-by: Jon Mason +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -338,6 +338,16 @@ + }; + }; + ++ i2c0: i2c@18009000 { ++ compatible = "brcm,iproc-i2c"; ++ reg = <0x18009000 0x50>; ++ interrupts = ; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ clock-frequency = <100000>; ++ status = "disabled"; ++ }; ++ + lcpll0: lcpll0@1800c100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; diff --git a/target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch b/target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch new file mode 100644 index 0000000000..9584d4eb1d --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/033-0016-ARM-dts-BCM5301X-Add-support-for-TP-LINK-Archer-C5-V.patch @@ -0,0 +1,130 @@ +From d6661da842bbeec2082b7263c9e682792e7951a9 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 14 Mar 2017 11:39:41 +0100 +Subject: [PATCH] ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2 +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is BCM47081A0 based home router with BCM43217 and BCM4352 wireless +chipsets. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts | 98 ++++++++++++++++++++++ + 2 files changed, 99 insertions(+) + create mode 100644 arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm47081-buffalo-wzr-900dhp.dtb \ + bcm47081-luxul-xap-1410.dtb \ + bcm47081-luxul-xwr-1200.dtb \ ++ bcm47081-tplink-archer-c5-v2.dtb \ + bcm4709-asus-rt-ac87u.dtb \ + bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-linksys-ea9200.dtb \ +--- /dev/null ++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +@@ -0,0 +1,98 @@ ++/* ++ * Copyright (C) 2017 Rafał Miłecki ++ * ++ * Licensed under the ISC license. ++ */ ++ ++/dts-v1/; ++ ++#include "bcm47081.dtsi" ++ ++/ { ++ compatible = "tplink,archer-c5-v2", "brcm,bcm47081", "brcm,bcm4708"; ++ model = "TP-LINK Archer C5 V2"; ++ ++ chosen { ++ bootargs = "earlycon"; ++ }; ++ ++ memory { ++ reg = <0x00000000 0x08000000>; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ 2ghz { ++ label = "bcm53xx:green:2ghz"; ++ gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ lan { ++ label = "bcm53xx:green:lan"; ++ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ usb2-port1 { ++ label = "bcm53xx:green:usb2-port1"; ++ gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ power { ++ label = "bcm53xx:green:power"; ++ gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "default-on"; ++ }; ++ ++ wan-green { ++ label = "bcm53xx:green:wan"; ++ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wps { ++ label = "bcm53xx:green:wps"; ++ gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ wan-amber { ++ label = "bcm53xx:amber:wan"; ++ gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ 5ghz { ++ label = "bcm53xx:green:5ghz"; ++ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; ++ }; ++ ++ usb2-port2 { ++ label = "bcm53xx:green:usb2-port2"; ++ gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; ++ }; ++ }; ++ ++ gpio-keys { ++ compatible = "gpio-keys"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ rfkill { ++ label = "WiFi"; ++ linux,code = ; ++ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; ++ }; ++ ++ restart { ++ label = "Reset"; ++ linux,code = ; ++ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; ++ }; ++ }; ++}; ++ ++&spi_nor { ++ status = "okay"; ++}; ++ ++&usb2 { ++ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; ++}; diff --git a/target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch b/target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch new file mode 100644 index 0000000000..781af7a527 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.9/033-0017-ARM-dts-BCM953012HR-Add-ethernet-aliases.patch @@ -0,0 +1,27 @@ +From a7996761d1dacbac10c892c16faa90dfe46affcd Mon Sep 17 00:00:00 2001 +From: Steve Lin +Date: Wed, 15 Mar 2017 16:59:35 -0400 +Subject: [PATCH] ARM: dts: BCM953012HR: Add ethernet aliases + +Adding ethernet aliases. These are used, for example, by bootloaders, +to modify the MAC addresses in the device tree. + +Signed-off-by: Steve Lin +Acked-by: Jon Mason +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm953012hr.dts | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/arch/arm/boot/dts/bcm953012hr.dts ++++ b/arch/arm/boot/dts/bcm953012hr.dts +@@ -41,6 +41,9 @@ + + aliases { + serial0 = &uart0; ++ ethernet0 = &gmac0; ++ ethernet1 = &gmac1; ++ ethernet2 = &gmac2; + }; + + chosen { diff --git a/target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch b/target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch index 80bffb9af6..a907c8921e 100644 --- a/target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch +++ b/target/linux/bcm53xx/patches-4.9/310-ARM-BCM5301X-Add-DT-for-Netgear-R7900.patch @@ -9,7 +9,7 @@ Signed-off-by: Rafał Miłecki --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ +@@ -91,6 +91,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4709-buffalo-wxr-1900dhp.dtb \ bcm4709-linksys-ea9200.dtb \ bcm4709-netgear-r7000.dtb \ diff --git a/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch b/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch index e7262cb909..425c420da7 100644 --- a/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch +++ b/target/linux/bcm53xx/patches-4.9/311-ARM-BCM5301X-Add-power-button-for-Buffalo-WZR-1750DHP.patch @@ -5,7 +5,7 @@ Signed-off-by: Felix Fietkau --- --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -103,6 +103,12 @@ +@@ -98,6 +98,12 @@ #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3