From 374e64672447e2c0af7a4cd2d10baa71757a0dd9 Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Sun, 28 Oct 2018 11:03:49 +0100 Subject: ath79: fix PQI Air Pen support Use the correct dts filename. It has to be __. Signed-off-by: Mathias Kresin --- target/linux/ath79/dts/ar9330_pqi-air-pen.dts | 147 -------------------------- target/linux/ath79/dts/ar9330_pqi_air-pen.dts | 147 ++++++++++++++++++++++++++ 2 files changed, 147 insertions(+), 147 deletions(-) delete mode 100644 target/linux/ath79/dts/ar9330_pqi-air-pen.dts create mode 100644 target/linux/ath79/dts/ar9330_pqi_air-pen.dts (limited to 'target') diff --git a/target/linux/ath79/dts/ar9330_pqi-air-pen.dts b/target/linux/ath79/dts/ar9330_pqi-air-pen.dts deleted file mode 100644 index 6c662d2202..0000000000 --- a/target/linux/ath79/dts/ar9330_pqi-air-pen.dts +++ /dev/null @@ -1,147 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -/dts-v1/; - -#include -#include - -#include "ar9330.dtsi" - -/ { - model = "PQI Air-Pen"; - compatible = "pqi,air-pen", "qca,ar9330"; - - aliases { - serial0 = &uart; - led-boot = &wlan; - led-failsafe = &wlan; - led-upgrade = &wlan; - }; - - leds { - compatible = "gpio-leds"; - - wlan: wlan { - label = "air-pen:blue:wlan"; - gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "phy0tpt"; - }; - - wps { - label = "air-pen:blue:wps"; - gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; - default-state = "off"; - }; - }; - - keys { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - - wps { - label = "wps"; - linux,code = ; - gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; - }; - - reset { - label = "reset"; - linux,code = ; - gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - debounce-interval = <60>; - }; - }; -}; - -&uart { - status = "okay"; -}; - -&gpio { - status = "okay"; -}; - -&usb { - dr_mode = "host"; - status = "okay"; -}; - -&usb_phy { - status = "okay"; -}; - -&spi { - num-cs = <1>; - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <104000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x000000 0x040000>; - read-only; - }; - - partition@40000 { - label = "u-boot-env"; - reg = <0x040000 0x010000>; - }; - - art: partition@50000 { - label = "art"; - reg = <0x050000 0x010000>; - read-only; - }; - - partition@60000 { - label = "NVRAM"; - reg = <0x060000 0x010000>; - read-only; - }; - - partition@70000 { - label = "firmware"; - reg = <0x070000 0x780000>; - }; - - partition@7f0000 { - label = "CONF"; - reg = <0x7f0000 0x010000>; - read-only; - }; - }; - }; -}; - -ð0 { - status = "okay"; - - mtd-mac-address = <&art 0x1002>; - - gmac-config { - device = <&gmac>; - - switch-phy-addr-swap = <0>; - switch-phy-swap = <0>; - }; -}; - -ð1 { - status = "okay"; - compatible = "syscon", "simple-mfd"; -}; - -&wmac { - status = "okay"; - mtd-cal-data = <&art 0x1000>; - mtd-mac-address = <&art 0x2>; -}; diff --git a/target/linux/ath79/dts/ar9330_pqi_air-pen.dts b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts new file mode 100644 index 0000000000..6c662d2202 --- /dev/null +++ b/target/linux/ath79/dts/ar9330_pqi_air-pen.dts @@ -0,0 +1,147 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "ar9330.dtsi" + +/ { + model = "PQI Air-Pen"; + compatible = "pqi,air-pen", "qca,ar9330"; + + aliases { + serial0 = &uart; + led-boot = &wlan; + led-failsafe = &wlan; + led-upgrade = &wlan; + }; + + leds { + compatible = "gpio-leds"; + + wlan: wlan { + label = "air-pen:blue:wlan"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "phy0tpt"; + }; + + wps { + label = "air-pen:blue:wps"; + gpios = <&gpio 23 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <100>; + + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + debounce-interval = <60>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&gpio { + status = "okay"; +}; + +&usb { + dr_mode = "host"; + status = "okay"; +}; + +&usb_phy { + status = "okay"; +}; + +&spi { + num-cs = <1>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + reg = <0>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + }; + + art: partition@50000 { + label = "art"; + reg = <0x050000 0x010000>; + read-only; + }; + + partition@60000 { + label = "NVRAM"; + reg = <0x060000 0x010000>; + read-only; + }; + + partition@70000 { + label = "firmware"; + reg = <0x070000 0x780000>; + }; + + partition@7f0000 { + label = "CONF"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&art 0x1002>; + + gmac-config { + device = <&gmac>; + + switch-phy-addr-swap = <0>; + switch-phy-swap = <0>; + }; +}; + +ð1 { + status = "okay"; + compatible = "syscon", "simple-mfd"; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&art 0x2>; +}; -- cgit v1.2.3