From 06d0fda4d1220ea54c2886df594320f19622a98c Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Fri, 8 Nov 2013 12:44:38 +0000 Subject: switch to 3.12, enable support for AM33xx/OMAP3 Signed-off-by: Imre Kaloz SVN-Revision: 38692 --- target/linux/omap/Makefile | 4 +- target/linux/omap/base-files/etc/inittab | 1 + target/linux/omap/config-default | 465 +- target/linux/omap/image/Makefile | 8 +- target/linux/omap/image/boot.script | 4 +- target/linux/omap/patches-3.12/001-ti_git.patch | 82370 ++++++++++++++++++++++ 6 files changed, 82731 insertions(+), 121 deletions(-) create mode 100644 target/linux/omap/patches-3.12/001-ti_git.patch (limited to 'target') diff --git a/target/linux/omap/Makefile b/target/linux/omap/Makefile index 3a62911ca3..78361fc303 100644 --- a/target/linux/omap/Makefile +++ b/target/linux/omap/Makefile @@ -13,11 +13,11 @@ FEATURES:=usb targz audio display CPU_TYPE:=cortex-a9 CPU_SUBTYPE:=vfpv3 -LINUX_VERSION:=3.3.8 +LINUX_VERSION:=3.12 MAINTAINER:=Imre Kaloz -KERNELNAME:="uImage" +KERNELNAME:="zImage dtbs" DEFAULT_PACKAGES += uboot-omap-am335x_evm uboot-omap-omap3_beagle uboot-omap-omap3_overo uboot-omap-omap4_panda diff --git a/target/linux/omap/base-files/etc/inittab b/target/linux/omap/base-files/etc/inittab index cc6c31a129..502c6f87af 100644 --- a/target/linux/omap/base-files/etc/inittab +++ b/target/linux/omap/base-files/etc/inittab @@ -1,4 +1,5 @@ ::sysinit:/etc/init.d/rcS S boot ::shutdown:/etc/init.d/rcS K shutdown +ttyO0::askfirst:/bin/ash --login ttyO2::askfirst:/bin/ash --login tty1::askfirst:/bin/ash --login diff --git a/target/linux/omap/config-default b/target/linux/omap/config-default index d51ebc47de..a0cc53eb2d 100644 --- a/target/linux/omap/config-default +++ b/target/linux/omap/config-default @@ -1,39 +1,67 @@ CONFIG_ALIGNMENT_TRAP=y +CONFIG_AM335X_CONTROL_USB=y +CONFIG_AM335X_PHY_USB=y # CONFIG_APM_EMULATION is not set CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_BANDGAP=y CONFIG_ARCH_HAS_BARRIERS=y CONFIG_ARCH_HAS_CPUFREQ=y -CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y CONFIG_ARCH_HAS_OPP=y -CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +# CONFIG_ARCH_MULTI_CPU_AUTO is not set +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y +CONFIG_ARCH_NR_GPIO=192 CONFIG_ARCH_OMAP=y -# CONFIG_ARCH_OMAP1 is not set -# CONFIG_ARCH_OMAP2 is not set CONFIG_ARCH_OMAP2PLUS=y CONFIG_ARCH_OMAP2PLUS_TYPICAL=y -# CONFIG_ARCH_OMAP3 is not set +CONFIG_ARCH_OMAP3=y CONFIG_ARCH_OMAP4=y CONFIG_ARCH_REQUIRE_GPIOLIB=y # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_ARCH_USES_GETTIMEOFFSET is not set +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y CONFIG_ARM=y +# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set CONFIG_ARM_CPU_SUSPEND=y CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_754322=y +CONFIG_ARM_ERRATA_775420=y CONFIG_ARM_GIC=y +# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set CONFIG_ARM_L1_CACHE_SHIFT=6 CONFIG_ARM_L1_CACHE_SHIFT_6=y # CONFIG_ARM_LPAE is not set CONFIG_ARM_NR_BANKS=8 +CONFIG_ARM_OMAP2PLUS_CPUFREQ=y CONFIG_ARM_PATCH_PHYS_VIRT=y CONFIG_ARM_THUMB=y # CONFIG_ARM_THUMBEE is not set -# CONFIG_ATH_COMMON is not set -# CONFIG_ATMEL_PWM is not set +CONFIG_ARM_VIRT_EXT=y +CONFIG_AT803X_PHY=y +# CONFIG_ATH_CARDS is not set +CONFIG_AUTO_ZRELADDR=y CONFIG_AVERAGE=y -CONFIG_BCMA_POSSIBLE=y +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_BD6107 is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +# CONFIG_BACKLIGHT_GPIO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_PANDORA is not set +CONFIG_BACKLIGHT_PWM=y +# CONFIG_BACKLIGHT_TPS65217 is not set +CONFIG_BCH=y +CONFIG_BCH_CONST_M=13 CONFIG_BOUNCE=y CONFIG_CACHE_L2X0=y CONFIG_CACHE_PL310=y @@ -46,6 +74,11 @@ CONFIG_CFG80211_DEFAULT_PS=y CONFIG_CFG80211_WEXT=y CONFIG_CLKDEV_LOOKUP=y CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +# CONFIG_CLK_TWL6040 is not set +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="console=ttyO0,115200n8" +CONFIG_COMMON_CLK=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v7=y @@ -56,110 +89,196 @@ CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y CONFIG_CPU_CP15=y CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_HAS_PMU=y # CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_IDLE_GOV_MENU=y CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PM=y CONFIG_CPU_RMAP=y CONFIG_CPU_TLB_V7=y CONFIG_CPU_V7=y CONFIG_CRC16=y -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ALGAPI=m -CONFIG_CRYPTO_ALGAPI2=m +# CONFIG_CROSSBAR is not set CONFIG_CRYPTO_ARC4=m -# CONFIG_DEBUG_HIGHMEM is not set +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_WORKQUEUE=m +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DDR=y +CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" +# CONFIG_DEBUG_UART_8250 is not set +# CONFIG_DEBUG_UART_PL01X is not set # CONFIG_DEBUG_USER is not set -CONFIG_DECOMPRESS_LZMA=y +# CONFIG_DISPLAY_DRA_EVM_ENCODER_TPD12S015 is not set +# CONFIG_DISPLAY_ENCODER_SIL9022 is not set +CONFIG_DISPLAY_PANEL_DPI=y +CONFIG_DISPLAY_PANEL_DSI_CM=y +# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set +CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=y +# CONFIG_DISPLAY_PANEL_SONY_ACX565AKM is not set +# CONFIG_DISPLAY_PANEL_TFCS9700 is not set +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_OF=y +CONFIG_DMA_OMAP=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DTC=y CONFIG_DUMMY_CONSOLE=y -# CONFIG_DW_WATCHDOG is not set +# CONFIG_DW_DMAC_CORE is not set +CONFIG_EEPROM_AT24=y CONFIG_EXT4_FS=y CONFIG_FB=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y +CONFIG_FB_DA8XX=y +# CONFIG_FB_DA8XX_TDA998X is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_OMAP2=y CONFIG_FB_OMAP2_DEBUG_SUPPORT=y CONFIG_FB_OMAP2_NUM_FBS=3 -# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set -# CONFIG_FB_SM7XX is not set -CONFIG_FB_TILEBLITTING=y -# CONFIG_FB_WMT_GE_ROPS is not set CONFIG_FIRMWARE_EDID=y # CONFIG_FONTS is not set CONFIG_FONT_8x16=y CONFIG_FONT_8x8=y +CONFIG_FONT_SUPPORT=y +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FRAME_POINTER=y +CONFIG_FREEZER=y CONFIG_FS_MBCACHE=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_CPUFREQ_CPU0 is not set +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IO=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_TPS65910=y CONFIG_GPIO_TWL4030=y +# CONFIG_GPIO_TWL6040 is not set CONFIG_HARDIRQS_SW_RESEND=y CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y -CONFIG_HAVE_AOUT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_HAVE_ARCH_KGDB=y CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_ARM_SCU=y CONFIG_HAVE_ARM_TWD=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_BPF_JIT=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_GENERIC_HARDIRQS=y -CONFIG_HAVE_IRQ_WORK=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZ4=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_NET_DSA=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_PERF_EVENTS=y CONFIG_HAVE_PROC_CPU=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SCHED_CLOCK=y CONFIG_HAVE_SMP=y -CONFIG_HAVE_SPARSE_IRQ=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y CONFIG_HIGHMEM=y # CONFIG_HIGHPTE is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_HWMON=y CONFIG_HW_CONSOLE=y -CONFIG_HZ=128 +CONFIG_HZ_FIXED=0 CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_OMAP=y CONFIG_INITRAMFS_SOURCE="" CONFIG_INPUT=y CONFIG_INPUT_KEYBOARD=y +CONFIG_INPUT_MATRIXKMAP=y +CONFIG_INPUT_TOUCHSCREEN=y CONFIG_INPUT_TWL4030_PWRBUTTON=y # CONFIG_INPUT_TWL4030_VIBRA is not set # CONFIG_INPUT_TWL6040_VIBRA is not set +CONFIG_IRQCHIP=y CONFIG_IRQ_DOMAIN=y -# CONFIG_IWM is not set +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y CONFIG_JBD2=y # CONFIG_KEYBOARD_GPIO is not set -# CONFIG_KEYBOARD_OMAP4 is not set CONFIG_KEYBOARD_TWL4030=y CONFIG_KTIME_SCALAR=y -# CONFIG_LEDS is not set +# CONFIG_LCD_AMS369FG06 is not set +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set CONFIG_LEDS_GPIO=y +# CONFIG_LEDS_PWM is not set # CONFIG_LEDS_REGULATOR is not set -CONFIG_LOCAL_TIMERS=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_MAC80211=m @@ -174,191 +293,307 @@ CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y # CONFIG_MAC80211_RC_PID is not set -CONFIG_MACH_OMAP4_PANDA=y -# CONFIG_MACH_OMAP_4430SDP is not set -# CONFIG_MACH_OMAP_GENERIC is not set +# CONFIG_MACH_CM_T35 is not set +# CONFIG_MACH_CM_T3517 is not set +# CONFIG_MACH_CRANEBOARD is not set +# CONFIG_MACH_DEVKIT8000 is not set +# CONFIG_MACH_IGEP0020 is not set +# CONFIG_MACH_IGEP0030 is not set +# CONFIG_MACH_NOKIA_RM680 is not set +# CONFIG_MACH_NOKIA_RX51 is not set +# CONFIG_MACH_OMAP3517EVM is not set +# CONFIG_MACH_OMAP3530_LV_SOM is not set +# CONFIG_MACH_OMAP3EVM is not set +CONFIG_MACH_OMAP3_BEAGLE=y +# CONFIG_MACH_OMAP3_PANDORA is not set +# CONFIG_MACH_OMAP3_TORPEDO is not set +# CONFIG_MACH_OMAP_3430SDP is not set +# CONFIG_MACH_OMAP_3630SDP is not set +CONFIG_MACH_OMAP_GENERIC=y +# CONFIG_MACH_OMAP_LDP is not set +# CONFIG_MACH_OMAP_ZOOM2 is not set +# CONFIG_MACH_OMAP_ZOOM3 is not set +CONFIG_MACH_OVERO=y +# CONFIG_MACH_SBC3530 is not set +# CONFIG_MACH_TOUCHBOOK is not set +CONFIG_MAILBOX=y CONFIG_MDIO_BOARDINFO=y +CONFIG_MEMORY=y +CONFIG_MFD_CORE=y CONFIG_MFD_OMAP_USB_HOST=y -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TWL4030_AUDIO is not set +CONFIG_MFD_TI_AM335X_TSCADC=y +CONFIG_MFD_TPS65217=y +# CONFIG_MFD_TPS65218 is not set +CONFIG_MFD_TPS65910=y +CONFIG_MFD_TWL4030_AUDIO=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y CONFIG_MMC=y CONFIG_MMC_BLOCK=y -CONFIG_MMC_OMAP=y +# CONFIG_MMC_OMAP is not set CONFIG_MMC_OMAP_HS=y CONFIG_MMC_UNSAFE_RESUME=y -# CONFIG_MPCORE_WATCHDOG is not set +CONFIG_MODULES_USE_ELF_REL=y # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_DATAFLASH=y # CONFIG_MTD_DATAFLASH_OTP is not set # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_BCH=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_BCH=y +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_OMAP_BCH=y CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_OF is not set +# CONFIG_MTD_SM_COMMON is not set CONFIG_MULTI_IRQ_HANDLER=y CONFIG_MUTEX_SPIN_ON_OWNER=y # CONFIG_MWIFIEX is not set CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEON=y +# CONFIG_NET_DMA is not set +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_RX_BUSY_POLL=y # CONFIG_NET_VENDOR_I825XX is not set # CONFIG_NL80211_TESTMODE is not set CONFIG_NLS=y +CONFIG_NOP_USB_XCEIV=y CONFIG_NO_HZ=y -CONFIG_NR_CPUS=2 +CONFIG_NO_HZ_COMMON=y +CONFIG_NO_HZ_IDLE=y +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_OMAP2PLUS_MBOX=y CONFIG_OMAP2_DSS=y -# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set -CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y CONFIG_OMAP2_DSS_DPI=y +CONFIG_OMAP2_DSS_DRA7XX_DPI=y CONFIG_OMAP2_DSS_DSI=y -# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0 -# CONFIG_OMAP2_DSS_RFBI is not set +CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y # CONFIG_OMAP2_DSS_VENC is not set -CONFIG_OMAP2_VRAM=y -CONFIG_OMAP2_VRAM_SIZE=32 +CONFIG_OMAP2_VRFB=y +# CONFIG_OMAP3_EMU is not set +# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set +# CONFIG_OMAP3_SDRC_AC_TIMING is not set CONFIG_OMAP4_DSS_HDMI=y +CONFIG_OMAP4_DSS_HDMI_AUDIO=y CONFIG_OMAP4_ERRATA_I688=y +CONFIG_OMAP5_DSS_HDMI=y CONFIG_OMAP_32K_TIMER=y -CONFIG_OMAP_32K_TIMER_HZ=128 +CONFIG_OMAP_CONTROL_PHY=y CONFIG_OMAP_DM_TIMER=y -# CONFIG_OMAP_MBOX_FWK is not set -CONFIG_OMAP_MCBSP=y +CONFIG_OMAP_INTERCONNECT=y +CONFIG_OMAP_MBOX=y +CONFIG_OMAP_MBOX_KFIFO_SIZE=256 CONFIG_OMAP_MUX=y # CONFIG_OMAP_MUX_DEBUG is not set CONFIG_OMAP_MUX_WARNINGS=y -CONFIG_OMAP_PACKAGE_CBL=y -CONFIG_OMAP_PACKAGE_CBS=y +CONFIG_OMAP_OCP2SCP=y +CONFIG_OMAP_PACKAGE_CBB=y +# CONFIG_OMAP_PIPE3 is not set CONFIG_OMAP_PM_NOOP=y CONFIG_OMAP_RESET_CLOCKS=y -# CONFIG_OMAP_SMARTREFLEX is not set -# CONFIG_OMAP_WATCHDOG is not set +CONFIG_OMAP_USB2=y +CONFIG_OMAP_WATCHDOG=y CONFIG_OUTER_CACHE=y CONFIG_OUTER_CACHE_SYNC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PANEL_DVI=y -CONFIG_PANEL_GENERIC_DPI=y -# CONFIG_PANEL_LGPHILIPS_LB035Q02 is not set -# CONFIG_PANEL_PICODLP is not set -# CONFIG_PANEL_TPO_TD043MTEA1 is not set # CONFIG_PCI_SYSCALL is not set CONFIG_PERF_USE_VMALLOC=y CONFIG_PHYLIB=y +CONFIG_PINCTRL=y CONFIG_PL310_ERRATA_588369=y CONFIG_PL310_ERRATA_727915=y # CONFIG_PL310_ERRATA_753970 is not set -CONFIG_PL310_ERRATA_769419=y +# CONFIG_PL310_ERRATA_769419 is not set CONFIG_PM=y CONFIG_PM_CLK=y # CONFIG_PM_DEBUG is not set CONFIG_PM_OPP=y CONFIG_PM_RUNTIME=y +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +CONFIG_POWER_AVS=y +# CONFIG_POWER_AVS_OMAP is not set +CONFIG_PPS=y # CONFIG_PREEMPT_RCU is not set +CONFIG_PROC_DEVICETREE=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_PWM=y +# CONFIG_PWM_PCA9685 is not set +CONFIG_PWM_SYSFS=y +CONFIG_PWM_TIECAP=y +CONFIG_PWM_TIEHRPWM=y +CONFIG_PWM_TIPWMSS=y +# CONFIG_PWM_TWL is not set +# CONFIG_PWM_TWL_LED is not set +CONFIG_RCU_STALL_COMMON=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_IRQ=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y CONFIG_REGULATOR=y -# CONFIG_REGULATOR_AD5398 is not set # CONFIG_REGULATOR_DEBUG is not set -# CONFIG_REGULATOR_DUMMY is not set +CONFIG_REGULATOR_DUMMY=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_ISL6271A is not set -# CONFIG_REGULATOR_LP3971 is not set -# CONFIG_REGULATOR_LP3972 is not set -# CONFIG_REGULATOR_MAX1586 is not set -# CONFIG_REGULATOR_MAX8649 is not set -# CONFIG_REGULATOR_MAX8660 is not set -# CONFIG_REGULATOR_MAX8952 is not set +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_TIAVSCLASS0=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y -# CONFIG_REGULATOR_TPS6524X is not set +CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_RESET_TI=y # CONFIG_RFKILL_REGULATOR is not set CONFIG_RFS_ACCEL=y CONFIG_RPS=y CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_PT7C4338 is not set +CONFIG_RTC_DRV_OMAP=y +CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_TWL4030=y -# CONFIG_RTL8192CU is not set +CONFIG_SCHED_HRTICK=y # CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_HTU21 is not set +CONFIG_SENSORS_LM75=y +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_OMAP=y CONFIG_SERIAL_OMAP_CONSOLE=y CONFIG_SMP=y CONFIG_SMP_ON_UP=y +CONFIG_SMSC911X=y +# CONFIG_SMSC911X_ARCH_HOOKS is not set +CONFIG_SND=y +CONFIG_SND_AM33XX_SOC_EVM=y +CONFIG_SND_ARM=y +CONFIG_SND_COMPRESS_OFFLOAD=y +CONFIG_SND_DAVINCI_SOC=y +CONFIG_SND_DAVINCI_SOC_MCASP=y +CONFIG_SND_DMAENGINE_PCM=y +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_JACK=y +CONFIG_SND_OMAP_SOC=y +CONFIG_SND_OMAP_SOC_DMIC=y +CONFIG_SND_OMAP_SOC_HDMI=y +CONFIG_SND_OMAP_SOC_MCBSP=y +CONFIG_SND_OMAP_SOC_MCPDM=y +CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=y +CONFIG_SND_OMAP_SOC_OMAP_HDMI=y +CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +CONFIG_SND_PCM=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_DMIC=y +CONFIG_SND_SOC_HDMI_CODEC=y +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_TLV320AIC3X=y +CONFIG_SND_SOC_TWL4030=y +CONFIG_SND_SOC_TWL6040=y +CONFIG_SND_TIMER=y +# CONFIG_SND_USB_HIFACE is not set +CONFIG_SOC_AM33XX=y +CONFIG_SOC_AM43XX=y +CONFIG_SOC_BUS=y +CONFIG_SOC_HAS_OMAP2_SDRC=y +# CONFIG_SOC_OMAP3430 is not set +# CONFIG_SOC_TI81XX is not set +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SPARSE_IRQ=y CONFIG_SPI=y CONFIG_SPI_MASTER=y # CONFIG_SPI_OMAP24XX is not set CONFIG_STOP_MACHINE=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_SWP_EMULATE=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y # CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +# CONFIG_TIDSPBRIDGE is not set +CONFIG_TI_CPPI41=y +CONFIG_TI_CPSW=y +CONFIG_TI_CPSW_PHY_SEL=y +CONFIG_TI_CPTS=y +CONFIG_TI_DAVINCI_CPDMA=y +# CONFIG_TI_DAVINCI_EMAC is not set +CONFIG_TI_DAVINCI_MDIO=y +CONFIG_TI_EDMA=y +CONFIG_TI_EMIF=y +CONFIG_TI_PRIV_EDMA=y +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_EGALAX is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_ST1232 is not set +CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set CONFIG_TREE_RCU=y CONFIG_TWL4030_CORE=y # CONFIG_TWL4030_MADC is not set CONFIG_TWL4030_POWER=y -CONFIG_TWL4030_USB=y CONFIG_TWL4030_WATCHDOG=y -# CONFIG_TWL6030_PWM is not set -CONFIG_TWL6030_USB=y -# CONFIG_TWL6040_CORE is not set +CONFIG_TWL6040_CORE=y CONFIG_UID16=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" CONFIG_USB=y -# CONFIG_USB_ARCH_HAS_XHCI is not set -# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_COMMON=y -# CONFIG_USB_DUMMY_HCD is not set -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_HCD_OMAP=y +CONFIG_USB_EHCI_HCD=m +CONFIG_USB_EHCI_HCD_OMAP=m # CONFIG_USB_EHCI_HCD_PLATFORM is not set -CONFIG_USB_EHCI_TT_NEWSCHED=y -# CONFIG_USB_ETH is not set -# CONFIG_USB_FILE_STORAGE is not set -# CONFIG_USB_FUNCTIONFS is not set -# CONFIG_USB_FUSB300 is not set -CONFIG_USB_GADGET=y -# CONFIG_USB_GADGETFS is not set -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_DEBUG_FS is not set -CONFIG_USB_GADGET_VBUS_DRAW=2 -# CONFIG_USB_G_DBGP is not set -# CONFIG_USB_G_HID is not set -# CONFIG_USB_G_NCM is not set -# CONFIG_USB_G_PRINTER is not set -# CONFIG_USB_G_SERIAL is not set -# CONFIG_USB_M66592 is not set -# CONFIG_USB_MV_UDC is not set -# CONFIG_USB_NET2272 is not set CONFIG_USB_NET_SMSC95XX=y -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_HCD_OMAP3=y -# CONFIG_USB_OHCI_HCD_PLATFORM is not set -CONFIG_USB_OMAP=y -CONFIG_USB_OTG_UTILS=y -# CONFIG_USB_R8A66597 is not set +CONFIG_USB_OTG=y +CONFIG_USB_PHY=y CONFIG_USB_SUPPORT=y CONFIG_USB_USBNET=y -# CONFIG_USB_ZERO is not set CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_USE_OF=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_VFP=y CONFIG_VFPv3=y +CONFIG_VIDEOMODE_HELPERS=y CONFIG_VT=y CONFIG_VT_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_VT_HW_CONSOLE_BINDING=y # CONFIG_W35UND is not set -# CONFIG_WL1251 is not set -CONFIG_WL12XX=m -CONFIG_WL12XX_MENU=m -CONFIG_WL12XX_PLATFORM_DATA=y -CONFIG_WL12XX_SDIO=m -# CONFIG_WL12XX_SPI is not set +CONFIG_WATCHDOG_CORE=y +# CONFIG_XEN is not set CONFIG_XPS=y -CONFIG_XZ_DEC=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_BCJ=y CONFIG_ZBOOT_ROM_BSS=0 CONFIG_ZBOOT_ROM_TEXT=0 +# CONFIG_ZBUD is not set CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/omap/image/Makefile b/target/linux/omap/image/Makefile index e118122bd4..afd8398e2f 100644 --- a/target/linux/omap/image/Makefile +++ b/target/linux/omap/image/Makefile @@ -1,5 +1,5 @@ # -# Copyright (C) 2012 OpenWrt.org +# Copyright (C) 2012-2013 OpenWrt.org # # This is free software, licensed under the GNU General Public License v2. # See /LICENSE for more information. @@ -9,7 +9,11 @@ include $(INCLUDE_DIR)/image.mk define Image/BuildKernel mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n 'Boot Image' -d boot.script $(BIN_DIR)/boot.scr - cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-uImage + cp $(KDIR)/zImage $(BIN_DIR)/openwrt-$(BOARD)-zImage + -mkdir $(BIN_DIR)/dtbs + $(CP) $(LINUX_DIR)/arch/arm/boot/dts/am335x*.dtb $(BIN_DIR)/dtbs/ + $(CP) $(LINUX_DIR)/arch/arm/boot/dts/omap3*.dtb $(BIN_DIR)/dtbs/ + $(CP) $(LINUX_DIR)/arch/arm/boot/dts/omap4*.dtb $(BIN_DIR)/dtbs/ endef define Image/Build diff --git a/target/linux/omap/image/boot.script b/target/linux/omap/image/boot.script index d884a70195..ecdacfc60a 100644 --- a/target/linux/omap/image/boot.script +++ b/target/linux/omap/image/boot.script @@ -1,3 +1,3 @@ -fatload mmc 0:1 0x80000000 openwrt-omap-uImage +fatload mmc 0:1 0x80000000 openwrt-omap-zImage setenv bootargs vram=32M fixrtc mem=1G@0x80000000 root=/dev/mmcblk0p2 rootfstype=ext4 console=ttyO2,115200n8 rootwait -bootm 0x80000000 +bootz 0x80000000 diff --git a/target/linux/omap/patches-3.12/001-ti_git.patch b/target/linux/omap/patches-3.12/001-ti_git.patch new file mode 100644 index 0000000000..9a1b6c2ef1 --- /dev/null +++ b/target/linux/omap/patches-3.12/001-ti_git.patch @@ -0,0 +1,82370 @@ +--- a/arch/arm/boot/dts/am335x-boneblack.dts ++++ b/arch/arm/boot/dts/am335x-boneblack.dts +@@ -15,3 +15,80 @@ + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; ++ ++&mmc1 { ++ vmmc-supply = <&vmmcsd_fixed>; ++}; ++ ++&mmc2 { ++ vmmc-supply = <&vmmcsd_fixed>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&emmc_pins>; ++ bus-width = <8>; ++ ti,non-removable; ++ status = "okay"; ++}; ++ ++&am33xx_pinmux { ++ nxp_hdmi_bonelt_pins: nxp_hdmi_bonelt_pins { ++ pinctrl-single,pins = < ++ 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ ++ 0xa0 0x08 /* lcd_data0.lcd_data0, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xa4 0x08 /* lcd_data1.lcd_data1, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xa8 0x08 /* lcd_data2.lcd_data2, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xac 0x08 /* lcd_data3.lcd_data3, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xb0 0x08 /* lcd_data4.lcd_data4, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xb4 0x08 /* lcd_data5.lcd_data5, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xb8 0x08 /* lcd_data6.lcd_data6, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xbc 0x08 /* lcd_data7.lcd_data7, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xc0 0x08 /* lcd_data8.lcd_data8, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xc4 0x08 /* lcd_data9.lcd_data9, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xc8 0x08 /* lcd_data10.lcd_data10, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xcc 0x08 /* lcd_data11.lcd_data11, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xd0 0x08 /* lcd_data12.lcd_data12, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xd4 0x08 /* lcd_data13.lcd_data13, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xd8 0x08 /* lcd_data14.lcd_data14, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xdc 0x08 /* lcd_data15.lcd_data15, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT | AM33XX_PULL_DISA */ ++ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ ++ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ ++ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ ++ 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OMAP_MUX_MODE0 | AM33XX_PIN_OUTPUT */ ++ >; ++ }; ++ nxp_hdmi_bonelt_off_pins: nxp_hdmi_bonelt_off_pins { ++ pinctrl-single,pins = < ++ 0x1b0 0x03 /* xdma_event_intr0, OMAP_MUX_MODE3 | AM33XX_PIN_OUTPUT */ ++ >; ++ }; ++}; ++ ++&i2c0 { ++ hdmi1: hdmi@70 { ++ compatible = "nxp,tda998x"; ++ reg = <0x70>; ++ }; ++}; ++ ++&lcdc { ++ pinctrl-names = "default", "off"; ++ pinctrl-0 = <&nxp_hdmi_bonelt_pins>; ++ pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; ++ status = "okay"; ++ hdmi = <&hdmi1>; ++ display-timings { ++ 640x480P60 { ++ clock-frequency = <25200000>; ++ hactive = <640>; ++ vactive = <480>; ++ hfront-porch = <16>; ++ hback-porch = <48>; ++ hsync-len = <96>; ++ vback-porch = <31>; ++ vfront-porch = <11>; ++ vsync-len = <2>; ++ hsync-active = <0>; ++ vsync-active = <0>; ++ }; ++ }; ++}; ++ +--- a/arch/arm/boot/dts/am335x-bone-common.dtsi ++++ b/arch/arm/boot/dts/am335x-bone-common.dtsi +@@ -107,6 +107,27 @@ + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; ++ ++ mmc1_pins: pinmux_mmc1_pins { ++ pinctrl-single,pins = < ++ 0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */ ++ >; ++ }; ++ ++ emmc_pins: pinmux_emmc_pins { ++ pinctrl-single,pins = < ++ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ ++ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ ++ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ ++ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ ++ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ ++ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ ++ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ ++ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ ++ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ ++ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ ++ >; ++ }; + }; + + ocp { +@@ -183,15 +204,24 @@ + led@4 { + label = "beaglebone:green:usr2"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@5 { + label = "beaglebone:green:usr3"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; ++ linux,default-trigger = "mmc1"; + default-state = "off"; + }; + }; ++ ++ vmmcsd_fixed: fixedregulator@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vmmcsd_fixed"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; + }; + + /include/ "tps65217.dtsi" +@@ -260,3 +290,12 @@ + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + }; ++ ++&mmc1 { ++ status = "okay"; ++ bus-width = <0x4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; ++ cd-inverted; ++}; +--- a/arch/arm/boot/dts/am335x-bone.dts ++++ b/arch/arm/boot/dts/am335x-bone.dts +@@ -9,3 +9,13 @@ + + #include "am33xx.dtsi" + #include "am335x-bone-common.dtsi" ++ ++&ldo3_reg { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++}; ++ ++&mmc1 { ++ vmmc-supply = <&ldo3_reg>; ++}; +--- a/arch/arm/boot/dts/am335x-evm.dts ++++ b/arch/arm/boot/dts/am335x-evm.dts +@@ -149,6 +149,54 @@ + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; ++ ++ mmc1_pins: pinmux_mmc1_pins { ++ pinctrl-single,pins = < ++ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ ++ >; ++ }; ++ ++ lcd_pins_s0: lcd_pins_s0 { ++ pinctrl-single,pins = < ++ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ ++ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ ++ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ ++ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ ++ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ ++ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ ++ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ ++ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ ++ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ ++ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ ++ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ ++ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ ++ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ ++ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ ++ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ ++ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ ++ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ ++ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ ++ 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ ++ 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ ++ 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ ++ 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ ++ 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ ++ 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ ++ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ ++ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ ++ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ ++ 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ ++ >; ++ }; ++ ++ am335x_evm_audio_pins: am335x_evm_audio_pins { ++ pinctrl-single,pins = < ++ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */ ++ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */ ++ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ ++ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ ++ >; ++ }; + }; + + ocp { +@@ -244,6 +292,18 @@ + compatible = "ti,tmp275"; + reg = <0x48>; + }; ++ ++ tlv320aic3106: tlv320aic3106@1b { ++ compatible = "ti,tlv320aic3106"; ++ reg = <0x1b>; ++ status = "okay"; ++ ++ /* Regulators */ ++ AVDD-supply = <&vaux2_reg>; ++ IOVDD-supply = <&vaux2_reg>; ++ DRVDD-supply = <&vaux2_reg>; ++ DVDD-supply = <&vbat>; ++ }; + }; + + elm: elm@48080000 { +@@ -268,8 +328,7 @@ + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; +- ti,nand-ecc-opt = "bch8"; +- gpmc,device-nand = "true"; ++ ti,nand-ecc-opt= "bch8"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; +@@ -293,53 +352,78 @@ + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; +- + #address-cells = <1>; + #size-cells = <1>; +- elm_id = <&elm>; +- ++ ti,elm-id = <&elm>; + /* MTD partition table */ + partition@0 { + label = "SPL1"; + reg = <0x00000000 0x000020000>; + }; +- + partition@1 { + label = "SPL2"; + reg = <0x00020000 0x00020000>; + }; +- + partition@2 { + label = "SPL3"; + reg = <0x00040000 0x00020000>; + }; +- + partition@3 { + label = "SPL4"; + reg = <0x00060000 0x00020000>; + }; +- + partition@4 { + label = "U-boot"; + reg = <0x00080000 0x001e0000>; + }; +- + partition@5 { + label = "environment"; + reg = <0x00260000 0x00020000>; + }; +- + partition@6 { + label = "Kernel"; + reg = <0x00280000 0x00500000>; + }; +- + partition@7 { + label = "File-System"; + reg = <0x00780000 0x0F880000>; + }; + }; + }; ++ ++ lcdc: lcdc@0x4830e000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lcd_pins_s0>; ++ status = "okay"; ++ display-timings { ++ 800x480p62 { ++ clock-frequency = <30000000>; ++ hactive = <800>; ++ vactive = <480>; ++ hfront-porch = <39>; ++ hback-porch = <39>; ++ hsync-len = <47>; ++ vback-porch = <29>; ++ vfront-porch = <13>; ++ vsync-len = <2>; ++ hsync-active = <1>; ++ vsync-active = <1>; ++ }; ++ }; ++ }; ++ ++ sound { ++ compatible = "ti,da830-evm-audio"; ++ ti,model = "AM335x-EVM"; ++ ti,audio-codec = <&tlv320aic3106>; ++ ti,mcasp-controller = <&mcasp1>; ++ ti,codec-clock-rate = <12000000>; ++ ti,audio-routing = ++ "Headphone Jack", "HPLOUT", ++ "Headphone Jack", "HPROUT", ++ "LINE1L", "Line In", ++ "LINE1R", "Line In"; ++ }; + }; + + vbat: fixedregulator@0 { +@@ -403,10 +487,63 @@ + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; ++ ++ panel { ++ compatible = "ti,tilcdc,panel"; ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lcd_pins_s0>; ++ panel-info { ++ ac-bias = <255>; ++ ac-bias-intrpt = <0>; ++ dma-burst-sz = <16>; ++ bpp = <32>; ++ fdd = <0x80>; ++ sync-edge = <0>; ++ sync-ctrl = <1>; ++ raster-order = <0>; ++ fifo-th = <0>; ++ }; ++ ++ display-timings { ++ 800x480p62 { ++ clock-frequency = <30000000>; ++ hactive = <800>; ++ vactive = <480>; ++ hfront-porch = <39>; ++ hback-porch = <39>; ++ hsync-len = <47>; ++ vback-porch = <29>; ++ vfront-porch = <13>; ++ vsync-len = <2>; ++ hsync-active = <1>; ++ vsync-active = <1>; ++ }; ++ }; ++ }; + }; + + #include "tps65910.dtsi" + ++&mcasp1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&am335x_evm_audio_pins>; ++ ++ status = "okay"; ++ ++ op-mode = <0>; /* MCASP_IIS_MODE */ ++ tdm-slots = <2>; ++ /* 16 serializer */ ++ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ ++ 0 0 1 2 ++ 0 0 0 0 ++ 0 0 0 0 ++ 0 0 0 0 ++ >; ++ tx-num-evt = <1>; ++ rx-num-evt = <1>; ++}; ++ + &tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; +@@ -477,6 +614,8 @@ + }; + + vmmc_reg: regulator@12 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +@@ -509,7 +648,7 @@ + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; +- ti,coordiante-readouts = <5>; ++ ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + +@@ -517,3 +656,12 @@ + ti,adc-channels = <4 5 6 7>; + }; + }; ++ ++&mmc1 { ++ status = "okay"; ++ vmmc-supply = <&vmmc_reg>; ++ bus-width = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/am335x-evm-profile2.dts +@@ -0,0 +1,296 @@ ++/* ++ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++/dts-v1/; ++ ++#include "am33xx.dtsi" ++ ++/ { ++ model = "TI AM335x EVM"; ++ compatible = "ti,am335x-evm", "ti,am33xx"; ++ ++ cpus { ++ cpu@0 { ++ cpu0-supply = <&vdd1_reg>; ++ }; ++ }; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x80000000 0x10000000>; /* 256 MB */ ++ }; ++ ++ am33xx_pinmux: pinmux@44e10800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&matrix_keypad_s0 &clkout2_pin>; ++ ++ matrix_keypad_s0: matrix_keypad_s0 { ++ pinctrl-single,pins = < ++ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ ++ 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a6.gpio1_22 */ ++ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a9.gpio1_25 */ ++ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a10.gpio1_26 */ ++ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */ ++ >; ++ }; ++ ++ i2c0_pins: pinmux_i2c0_pins { ++ pinctrl-single,pins = < ++ 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ ++ 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ ++ >; ++ }; ++ ++ spi0_pins: pinmux_spi0_pins { ++ pinctrl-single,pins = < ++ 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_clk.spi0_clk */ ++ 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ ++ 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ ++ 0x15c (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ ++ >; ++ }; ++ ++ uart0_pins: pinmux_uart0_pins { ++ pinctrl-single,pins = < ++ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ ++ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ ++ >; ++ }; ++ ++ clkout2_pin: pinmux_clkout2_pin { ++ pinctrl-single,pins = < ++ 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ ++ >; ++ }; ++ ++ cpsw_default: cpsw_default { ++ pinctrl-single,pins = < ++ /* Slave 1 */ ++ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ ++ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ ++ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ ++ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ ++ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ ++ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ ++ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ ++ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ ++ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */ ++ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */ ++ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ ++ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ ++ >; ++ }; ++ ++ cpsw_sleep: cpsw_sleep { ++ pinctrl-single,pins = < ++ /* Slave 1 reset value */ ++ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ >; ++ }; ++ ++ davinci_mdio_default: davinci_mdio_default { ++ pinctrl-single,pins = < ++ /* MDIO */ ++ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ ++ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ ++ >; ++ }; ++ ++ davinci_mdio_sleep: davinci_mdio_sleep { ++ pinctrl-single,pins = < ++ /* MDIO reset value */ ++ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ >; ++ }; ++ }; ++ ++ ocp { ++ uart0: serial@44e09000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@44e0b000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ ++ status = "okay"; ++ clock-frequency = <400000>; ++ ++ tps: tps@2d { ++ reg = <0x2d>; ++ }; ++ }; ++ ++ spi0: spi@48030000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>; ++ ++ status = "okay"; ++ m25p80@0 { ++ compatible = "w25q64"; ++ spi-max-frequency = <24000000>; ++ reg = <0x0>; ++ }; ++ }; ++ }; ++ ++ vbat: fixedregulator@0 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vbat"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ regulator-boot-on; ++ }; ++ ++ lis3_reg: fixedregulator@1 { ++ compatible = "regulator-fixed"; ++ regulator-name = "lis3_reg"; ++ regulator-boot-on; ++ }; ++ ++ matrix_keypad: matrix_keypad@0 { ++ compatible = "gpio-matrix-keypad"; ++ debounce-delay-ms = <5>; ++ col-scan-delay-us = <2>; ++ ++ row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH /* Bank1, pin25 */ ++ &gpio1 26 GPIO_ACTIVE_HIGH /* Bank1, pin26 */ ++ &gpio1 27 GPIO_ACTIVE_HIGH>; /* Bank1, pin27 */ ++ ++ col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH /* Bank1, pin21 */ ++ &gpio1 22 GPIO_ACTIVE_HIGH>; /* Bank1, pin22 */ ++ ++ linux,keymap = <0x0000008b /* MENU */ ++ 0x0100009e /* BACK */ ++ 0x02000069 /* LEFT */ ++ 0x0001006a /* RIGHT */ ++ 0x0101001c /* ENTER */ ++ 0x0201006c>; /* DOWN */ ++ }; ++}; ++ ++#include "tps65910.dtsi" ++ ++&tps { ++ vcc1-supply = <&vbat>; ++ vcc2-supply = <&vbat>; ++ vcc3-supply = <&vbat>; ++ vcc4-supply = <&vbat>; ++ vcc5-supply = <&vbat>; ++ vcc6-supply = <&vbat>; ++ vcc7-supply = <&vbat>; ++ vccio-supply = <&vbat>; ++ ++ regulators { ++ vrtc_reg: regulator@0 { ++ regulator-always-on; ++ }; ++ ++ vio_reg: regulator@1 { ++ regulator-always-on; ++ }; ++ ++ vdd1_reg: regulator@2 { ++ /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ ++ regulator-name = "vdd_mpu"; ++ regulator-min-microvolt = <912500>; ++ regulator-max-microvolt = <1312500>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vdd2_reg: regulator@3 { ++ /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ ++ regulator-name = "vdd_core"; ++ regulator-min-microvolt = <912500>; ++ regulator-max-microvolt = <1150000>; ++ regulator-boot-on; ++ regulator-always-on; ++ }; ++ ++ vdd3_reg: regulator@4 { ++ regulator-always-on; ++ }; ++ ++ vdig1_reg: regulator@5 { ++ regulator-always-on; ++ }; ++ ++ vdig2_reg: regulator@6 { ++ regulator-always-on; ++ }; ++ ++ vpll_reg: regulator@7 { ++ regulator-always-on; ++ }; ++ ++ vdac_reg: regulator@8 { ++ regulator-always-on; ++ }; ++ ++ vaux1_reg: regulator@9 { ++ regulator-always-on; ++ }; ++ ++ vaux2_reg: regulator@10 { ++ regulator-always-on; ++ }; ++ ++ vaux33_reg: regulator@11 { ++ regulator-always-on; ++ }; ++ ++ vmmc_reg: regulator@12 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-always-on; ++ }; ++ }; ++}; ++ ++&mac { ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&cpsw_default>; ++ pinctrl-1 = <&cpsw_sleep>; ++}; ++ ++&davinci_mdio { ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&davinci_mdio_default>; ++ pinctrl-1 = <&davinci_mdio_sleep>; ++}; ++ ++&cpsw_emac0 { ++ phy_id = <&davinci_mdio>, <0>; ++ phy-mode = "rgmii-txid"; ++}; ++ ++&cpsw_emac1 { ++ phy_id = <&davinci_mdio>, <1>; ++ phy-mode = "rgmii-txid"; ++}; ++ ++&mmc1 { ++ status = "okay"; ++ vmmc-supply = <&vmmc_reg>; ++ bus-width = <4>; ++}; +--- a/arch/arm/boot/dts/am335x-evmsk.dts ++++ b/arch/arm/boot/dts/am335x-evmsk.dts +@@ -35,6 +35,39 @@ + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; + ++ lcd_pins_s0: lcd_pins_s0 { ++ pinctrl-single,pins = < ++ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */ ++ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */ ++ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */ ++ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */ ++ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */ ++ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */ ++ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */ ++ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */ ++ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */ ++ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */ ++ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */ ++ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */ ++ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */ ++ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */ ++ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */ ++ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */ ++ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */ ++ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */ ++ 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */ ++ 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */ ++ 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */ ++ 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */ ++ 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */ ++ 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */ ++ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */ ++ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */ ++ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */ ++ 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */ ++ >; ++ }; ++ + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ +@@ -158,6 +191,21 @@ + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; ++ ++ mmc1_pins: pinmux_mmc1_pins { ++ pinctrl-single,pins = < ++ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ ++ >; ++ }; ++ ++ mcasp1_pins: mcasp1_pins { ++ pinctrl-single,pins = < ++ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ ++ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ ++ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ ++ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ ++ >; ++ }; + }; + + ocp { +@@ -206,6 +254,18 @@ + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; ++ ++ tlv320aic3106: tlv320aic3106@1b { ++ compatible = "ti,tlv320aic3106"; ++ reg = <0x1b>; ++ status = "okay"; ++ ++ /* Regulators */ ++ AVDD-supply = <&vaux2_reg>; ++ IOVDD-supply = <&vaux2_reg>; ++ DRVDD-supply = <&vaux2_reg>; ++ DVDD-supply = <&vbat>; ++ }; + }; + + musb: usb@47400000 { +@@ -219,9 +279,22 @@ + status = "okay"; + }; + ++ usb-phy@47401b00 { ++ status = "okay"; ++ }; ++ + usb@47401000 { + status = "okay"; + }; ++ ++ usb@47401800 { ++ status = "okay"; ++ dr_mode = "host"; ++ }; ++ ++ dma-controller@07402000 { ++ status = "okay"; ++ }; + }; + + epwmss2: epwmss@48304000 { +@@ -233,6 +306,38 @@ + pinctrl-0 = <&ecap2_pins>; + }; + }; ++ ++ lcdc: lcdc@0x4830e000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&lcd_pins_s0>; ++ status = "okay"; ++ display-timings { ++ 480x272 { ++ hactive = <480>; ++ vactive = <272>; ++ hback-porch = <43>; ++ hfront-porch = <8>; ++ hsync-len = <4>; ++ vback-porch = <12>; ++ vfront-porch = <4>; ++ vsync-len = <10>; ++ clock-frequency = <9000000>; ++ hsync-active = <0>; ++ vsync-active = <0>; ++ }; ++ }; ++ }; ++ ++ sound { ++ compatible = "ti,da830-evm-audio"; ++ ti,model = "AM335x-EVMSK"; ++ ti,audio-codec = <&tlv320aic3106>; ++ ti,mcasp-controller = <&mcasp1>; ++ ti,codec-clock-rate = <24576000>; ++ ti,audio-routing = ++ "Headphone Jack", "HPLOUT", ++ "Headphone Jack", "HPROUT"; ++ }; + }; + + vbat: fixedregulator@0 { +@@ -393,6 +498,8 @@ + }; + + vmmc_reg: regulator@12 { ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +@@ -419,3 +526,45 @@ + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii-txid"; + }; ++ ++&tscadc { ++ status = "okay"; ++ tsc { ++ ti,wires = <4>; ++ ti,x-plate-resistance = <200>; ++ ti,coordinate-readouts = <5>; ++ ti,wire-config = <0x00 0x11 0x22 0x33>; ++ }; ++}; ++ ++&gpio0 { ++ ti,no-reset; ++}; ++ ++&mmc1 { ++ status = "okay"; ++ vmmc-supply = <&vmmc_reg>; ++ bus-width = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; ++}; ++ ++&mcasp1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mcasp1_pins>; ++ ++ status = "okay"; ++ ++ op-mode = <0>; /* MCASP_IIS_MODE */ ++ tdm-slots = <2>; ++ /* 16 serializer */ ++ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ ++ 0 0 1 2 ++ 0 0 0 0 ++ 0 0 0 0 ++ 0 0 0 0 ++ >; ++ tx-num-evt = <1>; ++ rx-num-evt = <1>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/am33xx-clocks.dtsi +@@ -0,0 +1,661 @@ ++/* ++ * Device Tree Source for AM33xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++clk_32768_ck: clk_32768_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++clk_rc32k_ck: clk_rc32k_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32000>; ++}; ++ ++virt_19200000_ck: virt_19200000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <19200000>; ++}; ++ ++virt_24000000_ck: virt_24000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <24000000>; ++}; ++ ++virt_25000000_ck: virt_25000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <25000000>; ++}; ++ ++virt_26000000_ck: virt_26000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <26000000>; ++}; ++ ++sys_clkin_ck: sys_clkin_ck@44e10040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ++ bit-shift = <22>; ++ reg = <0x44e10040 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++tclkin_ck: tclkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++dpll_core_ck: dpll_core_ck@44e00490 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-core-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44e00490 0x4>, <0x44e0045c 0x4>, <0x44e00468 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_core_x2_ck: dpll_core_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_core_ck>; ++}; ++ ++dpll_core_m4_ck: dpll_core_m4_ck@44e00480 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ reg = <0x44e00480 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_core_m5_ck: dpll_core_m5_ck@44e00484 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ reg = <0x44e00484 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_core_m6_ck: dpll_core_m6_ck@44e004d8 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ reg = <0x44e004d8 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_mpu_ck: dpll_mpu_ck@44e00488 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44e00488 0x4>, <0x44e00420 0x4>, <0x44e0042c 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_mpu_m2_ck: dpll_mpu_m2_ck@44e004a8 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_mpu_ck>; ++ reg = <0x44e004a8 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_ddr_ck: dpll_ddr_ck@44e00494 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-no-gate-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44e00494 0x4>, <0x44e00434 0x4>, <0x44e00440 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_ddr_m2_ck: dpll_ddr_m2_ck@44e004a0 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_ddr_ck>; ++ reg = <0x44e004a0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_ddr_m2_div2_ck: dpll_ddr_m2_div2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_ddr_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++dpll_disp_ck: dpll_disp_ck@44e00498 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-no-gate-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44e00498 0x4>, <0x44e00448 0x4>, <0x44e00454 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_disp_m2_ck: dpll_disp_m2_ck@44e004a4 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_disp_ck>; ++ reg = <0x44e004a4 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ set-rate-parent; ++}; ++ ++dpll_per_ck: dpll_per_ck@44e0048c { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-no-gate-j-type-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44e0048c 0x4>, <0x44e00470 0x4>, <0x44e0049c 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_per_m2_ck: dpll_per_m2_ck@44e004ac { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_ck>; ++ reg = <0x44e004ac 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++adc_tsc_fck: adc_tsc_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++cefuse_fck: cefuse_fck@44e00a20 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_clkin_ck>; ++ bit-shift = <1>; ++ reg = <0x44e00a20 0x4>; ++}; ++ ++clk_24mhz: clk_24mhz { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++clkdiv32k_ck: clkdiv32k_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&clk_24mhz>; ++ clock-mult = <1>; ++ clock-div = <732>; ++}; ++ ++clkdiv32k_ick: clkdiv32k_ick@44e0014c { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&clkdiv32k_ck>; ++ reg = <0x44e0014c 0x4>; ++ bit-shift = <1>; ++}; ++ ++dcan0_fck: dcan0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dcan1_fck: dcan1_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l3_gclk: l3_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++pruss_ocp_gclk: pruss_ocp_gclk@44e00530 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&l3_gclk>, <&dpll_disp_m2_ck>; ++ reg = <0x44e00530 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcasp0_fck: mcasp0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mcasp1_fck: mcasp1_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mmu_fck: mmu_fck@44e00914 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ bit-shift = <1>; ++ reg = <0x44e00914 0x4>; ++}; ++ ++smartreflex0_fck: smartreflex0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++smartreflex1_fck: smartreflex1_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sha0_fck: sha0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++rng_fck: rng_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++aes0_fck: aes0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++timer1_fck: timer1_fck@44e00528 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>; ++ reg = <0x44e00528 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++timer2_fck: timer2_fck@44e00508 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e00508 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer3_fck: timer3_fck@44e0050c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e0050c 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer4_fck: timer4_fck@44e00510 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e00510 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer5_fck: timer5_fck@44e00518 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e00518 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer6_fck: timer6_fck@44e0051c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e0051c 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer7_fck: timer7_fck@44e00504 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e00504 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++usbotg_fck: usbotg_fck@44e0047c { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_ck>; ++ bit-shift = <8>; ++ reg = <0x44e0047c 0x4>; ++}; ++ ++dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++ieee5000_fck: ieee5000_fck@44e000e4 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_core_m4_div2_ck>; ++ bit-shift = <1>; ++ reg = <0x44e000e4 0x4>; ++}; ++ ++wdt1_fck: wdt1_fck@44e00538 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e00538 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++l4_rtc_gclk: l4_rtc_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++l4hs_gclk: l4hs_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l3s_gclk: l3s_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_div2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l4fw_gclk: l4fw_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_div2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l4ls_gclk: l4ls_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_div2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sysclk_div_ck: sysclk_div_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++cpsw_125mhz_gclk: cpsw_125mhz_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m5_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@44e00520 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_core_m5_ck>, <&dpll_core_m4_ck>; ++ reg = <0x44e00520 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@44e0053c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>; ++ reg = <0x44e0053c 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++gpio0_dbclk: gpio0_dbclk@44e00408 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpio0_dbclk_mux_ck>; ++ bit-shift = <18>; ++ reg = <0x44e00408 0x4>; ++}; ++ ++gpio1_dbclk: gpio1_dbclk@44e000ac { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <18>; ++ reg = <0x44e000ac 0x4>; ++}; ++ ++gpio2_dbclk: gpio2_dbclk@44e000b0 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <18>; ++ reg = <0x44e000b0 0x4>; ++}; ++ ++gpio3_dbclk: gpio3_dbclk@44e000b4 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <18>; ++ reg = <0x44e000b4 0x4>; ++}; ++ ++lcd_gclk: lcd_gclk@44e00534 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; ++ reg = <0x44e00534 0x4>; ++ bit-mask = <0x3>; ++ set-rate-parent; ++}; ++ ++mmc_clk: mmc_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@44e0052c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_core_m4_ck>, <&dpll_per_m2_ck>; ++ bit-shift = <1>; ++ reg = <0x44e0052c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gfx_fck_div_ck: gfx_fck_div_ck@44e0052c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&gfx_fclk_clksel_ck>; ++ reg = <0x44e0052c 0x4>; ++ table = < 1 0 >, < 2 1 >; ++ bit-mask = <0x1>; ++}; ++ ++sysclkout_pre_ck: sysclkout_pre_ck@44e00700 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&clk_32768_ck>, <&l3_gclk>, <&dpll_ddr_m2_ck>, <&dpll_per_m2_ck>, <&lcd_gclk>; ++ reg = <0x44e00700 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++clkout2_div_ck: clkout2_div_ck@44e00700 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sysclkout_pre_ck>; ++ bit-shift = <3>; ++ reg = <0x44e00700 0x4>; ++ table = < 1 0 >, < 2 1 >, < 3 2 >, < 4 3 >, < 5 4 >, < 6 5 >, < 7 6 >, < 8 7 >; ++ bit-mask = <0x7>; ++}; ++ ++dbg_sysclk_ck: dbg_sysclk_ck@44e00414 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_clkin_ck>; ++ bit-shift = <19>; ++ reg = <0x44e00414 0x4>; ++}; ++ ++dbg_clka_ck: dbg_clka_ck@44e00414 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ bit-shift = <30>; ++ reg = <0x44e00414 0x4>; ++}; ++ ++stm_pmd_clock_mux_ck: stm_pmd_clock_mux_ck@44e00414 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; ++ bit-shift = <22>; ++ reg = <0x44e00414 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++trace_pmd_clk_mux_ck: trace_pmd_clk_mux_ck@44e00414 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dbg_sysclk_ck>, <&dbg_clka_ck>; ++ bit-shift = <20>; ++ reg = <0x44e00414 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++stm_clk_div_ck: stm_clk_div_ck@44e00414 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&stm_pmd_clock_mux_ck>; ++ bit-shift = <27>; ++ reg = <0x44e00414 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++trace_clk_div_ck: trace_clk_div_ck@44e00414 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&trace_pmd_clk_mux_ck>; ++ bit-shift = <24>; ++ reg = <0x44e00414 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++clkout2_ck: clkout2_ck@44e00700 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkout2_div_ck>; ++ bit-shift = <7>; ++ reg = <0x44e00700 0x4>; ++}; ++ ++ehrpwm0_tbclk: ehrpwm0_tbclk@44e10664 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ bit-shift = <0>; ++ reg = <0x44e10664 0x4>; ++}; ++ ++ehrpwm1_tbclk: ehrpwm1_tbclk@44e10664 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ bit-shift = <1>; ++ reg = <0x44e10664 0x4>; ++}; ++ ++ehrpwm2_tbclk: ehrpwm2_tbclk@44e10664 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ bit-shift = <2>; ++ reg = <0x44e10664 0x4>; ++}; +--- a/arch/arm/boot/dts/am33xx.dtsi ++++ b/arch/arm/boot/dts/am33xx.dtsi +@@ -18,6 +18,9 @@ + interrupt-parent = <&intc>; + + aliases { ++ i2c0 = &i2c0; ++ i2c1 = &i2c1; ++ i2c2 = &i2c2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; +@@ -30,6 +33,8 @@ + usb1 = &usb1; + phy0 = &usb0_phy; + phy1 = &usb1_phy; ++ ethernet0 = &cpsw_emac0; ++ ethernet1 = &cpsw_emac1; + }; + + cpus { +@@ -53,6 +58,10 @@ + 275000 1125000 + >; + voltage-tolerance = <2>; /* 2 percentage */ ++ ++ clocks = <&dpll_mpu_ck>; ++ clock-names = "cpu"; ++ + clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; +@@ -91,6 +100,8 @@ + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; ++ clocks = <&l3_gclk>; ++ clock-names = "fck"; + + intc: interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; +@@ -100,9 +111,23 @@ + reg = <0x48200000 0x1000>; + }; + ++ edma: edma@49000000 { ++ compatible = "ti,edma3"; ++ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; ++ reg = <0x49000000 0x10000>, ++ <0x44e10f90 0x10>; ++ interrupts = <12 13 14>; ++ #dma-cells = <1>; ++ dma-channels = <64>; ++ ti,edma-regions = <4>; ++ ti,edma-slots = <256>; ++ }; ++ + gpio0: gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; ++ clocks = <&dpll_core_m4_div2_ck>, <&gpio0_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -114,6 +139,8 @@ + gpio1: gpio@4804c000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; ++ clocks = <&l4ls_gclk>, <&gpio1_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -125,6 +152,8 @@ + gpio2: gpio@481ac000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; ++ clocks = <&l4ls_gclk>, <&gpio2_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -136,6 +165,8 @@ + gpio3: gpio@481ae000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; ++ clocks = <&l4ls_gclk>, <&gpio3_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -147,6 +178,8 @@ + uart0: serial@44e09000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; ++ clocks = <&dpll_per_m2_div4_wkupdm_ck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupts = <72>; +@@ -156,6 +189,8 @@ + uart1: serial@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupts = <73>; +@@ -165,6 +200,8 @@ + uart2: serial@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupts = <74>; +@@ -174,6 +211,8 @@ + uart3: serial@481a6000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupts = <44>; +@@ -183,6 +222,8 @@ + uart4: serial@481a8000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart5"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupts = <45>; +@@ -192,6 +233,8 @@ + uart5: serial@481aa000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart6"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupts = <46>; +@@ -203,6 +246,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; ++ clocks = <&dpll_per_m2_div4_wkupdm_ck>; ++ clock-names = "fck"; + reg = <0x44e0b000 0x1000>; + interrupts = <70>; + status = "disabled"; +@@ -213,6 +258,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; + reg = <0x4802a000 0x1000>; + interrupts = <71>; + status = "disabled"; +@@ -223,14 +270,62 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; + reg = <0x4819c000 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + ++ mmc1: mmc@48060000 { ++ compatible = "ti,omap4-hsmmc"; ++ ti,hwmods = "mmc1"; ++ clocks = <&mmc_clk>, <&clkdiv32k_ick>; ++ clock-names = "fck", "mmchsdb_fck"; ++ ti,dual-volt; ++ ti,needs-special-reset; ++ ti,needs-special-hs-handling; ++ dmas = <&edma 24 ++ &edma 25>; ++ dma-names = "tx", "rx"; ++ interrupts = <64>; ++ interrupt-parent = <&intc>; ++ reg = <0x48060000 0x1000>; ++ status = "disabled"; ++ }; ++ ++ mmc2: mmc@481d8000 { ++ compatible = "ti,omap4-hsmmc"; ++ ti,hwmods = "mmc2"; ++ clocks = <&mmc_clk>, <&clkdiv32k_ick>; ++ clock-names = "fck", "mmchsdb_fck"; ++ ti,needs-special-reset; ++ dmas = <&edma 2 ++ &edma 3>; ++ dma-names = "tx", "rx"; ++ interrupts = <28>; ++ interrupt-parent = <&intc>; ++ reg = <0x481d8000 0x1000>; ++ status = "disabled"; ++ }; ++ ++ mmc3: mmc@47810000 { ++ compatible = "ti,omap4-hsmmc"; ++ ti,hwmods = "mmc3"; ++ clocks = <&mmc_clk>, <&clkdiv32k_ick>; ++ clock-names = "fck", "mmchsdb_fck"; ++ ti,needs-special-reset; ++ interrupts = <29>; ++ interrupt-parent = <&intc>; ++ reg = <0x47810000 0x1000>; ++ status = "disabled"; ++ }; ++ + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; ++ clocks = <&wdt1_fck>; ++ clock-names = "fck"; + reg = <0x44e35000 0x1000>; + interrupts = <91>; + }; +@@ -238,6 +333,8 @@ + dcan0: d_can@481cc000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can0"; ++ clocks = <&dcan0_fck>; ++ clock-names = "fck"; + reg = <0x481cc000 0x2000 + 0x44e10644 0x4>; + interrupts = <52>; +@@ -247,17 +344,32 @@ + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; ++ clocks = <&dcan1_fck>; ++ clock-names = "fck"; + reg = <0x481d0000 0x2000 + 0x44e10644 0x4>; + interrupts = <55>; + status = "disabled"; + }; + ++ mailbox: mailbox@480C8000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x480C8000 0x200>; ++ interrupts = <77>; ++ ti,hwmods = "mailbox"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <8>; ++ ti,mbox-names = "wkup_m3"; ++ ti,mbox-data = <0 0 0 0>; ++ }; ++ + timer1: timer@44e31000 { + compatible = "ti,am335x-timer-1ms"; + reg = <0x44e31000 0x400>; + interrupts = <67>; + ti,hwmods = "timer1"; ++ clocks = <&timer1_fck>; ++ clock-names = "fck"; + ti,timer-alwon; + }; + +@@ -266,6 +378,8 @@ + reg = <0x48040000 0x400>; + interrupts = <68>; + ti,hwmods = "timer2"; ++ clocks = <&timer2_fck>; ++ clock-names = "fck"; + }; + + timer3: timer@48042000 { +@@ -273,6 +387,8 @@ + reg = <0x48042000 0x400>; + interrupts = <69>; + ti,hwmods = "timer3"; ++ clocks = <&timer3_fck>; ++ clock-names = "fck"; + }; + + timer4: timer@48044000 { +@@ -280,6 +396,8 @@ + reg = <0x48044000 0x400>; + interrupts = <92>; + ti,hwmods = "timer4"; ++ clocks = <&timer4_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -288,6 +406,8 @@ + reg = <0x48046000 0x400>; + interrupts = <93>; + ti,hwmods = "timer5"; ++ clocks = <&timer5_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -296,6 +416,8 @@ + reg = <0x48048000 0x400>; + interrupts = <94>; + ti,hwmods = "timer6"; ++ clocks = <&timer6_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -304,6 +426,8 @@ + reg = <0x4804a000 0x400>; + interrupts = <95>; + ti,hwmods = "timer7"; ++ clocks = <&timer7_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -313,6 +437,8 @@ + interrupts = <75 + 76>; + ti,hwmods = "rtc"; ++ clocks = <&clk_32768_ck>; ++ clock-names = "fck"; + }; + + spi0: spi@48030000 { +@@ -323,6 +449,13 @@ + interrupts = <65>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi0"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ dmas = <&edma 16 ++ &edma 17 ++ &edma 18 ++ &edma 19>; ++ dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + +@@ -334,6 +467,13 @@ + interrupts = <125>; + ti,spi-num-cs = <2>; + ti,hwmods = "spi1"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ dmas = <&edma 42 ++ &edma 43 ++ &edma 44 ++ &edma 45>; ++ dma-names = "tx0", "rx0", "tx1", "rx1"; + status = "disabled"; + }; + +@@ -345,6 +485,8 @@ + #size-cells = <1>; + ti,hwmods = "usb_otg_hs"; + status = "disabled"; ++ clocks = <&usbotg_fck>; ++ clock-names = "fck"; + + ctrl_mod: control@44e10000 { + compatible = "ti,am335x-usb-ctrl-module"; +@@ -469,6 +611,8 @@ + compatible = "ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; +@@ -481,6 +625,8 @@ + #pwm-cells = <3>; + reg = <0x48300100 0x80>; + ti,hwmods = "ecap0"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + status = "disabled"; + }; + +@@ -489,6 +635,8 @@ + #pwm-cells = <3>; + reg = <0x48300200 0x80>; + ti,hwmods = "ehrpwm0"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + status = "disabled"; + }; + }; +@@ -497,6 +645,8 @@ + compatible = "ti,am33xx-pwmss"; + reg = <0x48302000 0x10>; + ti,hwmods = "epwmss1"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; +@@ -509,6 +659,8 @@ + #pwm-cells = <3>; + reg = <0x48302100 0x80>; + ti,hwmods = "ecap1"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + status = "disabled"; + }; + +@@ -517,6 +669,8 @@ + #pwm-cells = <3>; + reg = <0x48302200 0x80>; + ti,hwmods = "ehrpwm1"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + status = "disabled"; + }; + }; +@@ -525,6 +679,8 @@ + compatible = "ti,am33xx-pwmss"; + reg = <0x48304000 0x10>; + ti,hwmods = "epwmss2"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; +@@ -537,6 +693,8 @@ + #pwm-cells = <3>; + reg = <0x48304100 0x80>; + ti,hwmods = "ecap2"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + status = "disabled"; + }; + +@@ -545,6 +703,8 @@ + #pwm-cells = <3>; + reg = <0x48304200 0x80>; + ti,hwmods = "ehrpwm2"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + status = "disabled"; + }; + }; +@@ -552,6 +712,8 @@ + mac: ethernet@4a100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; ++ clocks = <&cpsw_125mhz_gclk>; ++ clock-names = "fck"; + cpdma_channels = <8>; + ale_entries = <1024>; + bd_ram_size = <0x2000>; +@@ -581,6 +743,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; ++ clocks = <&cpsw_125mhz_gclk>; ++ clock-names = "fck"; + bus_freq = <1000000>; + reg = <0x4a101000 0x100>; + }; +@@ -594,19 +758,33 @@ + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; ++ ++ phy_sel: cpsw-phy-sel@44e10650 { ++ compatible = "ti,am3352-cpsw-phy-sel"; ++ reg= <0x44e10650 0x4>; ++ reg-names = "gmii-sel"; ++ }; + }; + + ocmcram: ocmcram@40300000 { + compatible = "ti,am3352-ocmcram"; + reg = <0x40300000 0x10000>; + ti,hwmods = "ocmcram"; ++ clocks = <&l3_gclk>; ++ clock-names = "fck"; + }; + + wkup_m3: wkup_m3@44d00000 { + compatible = "ti,am3353-wkup-m3"; +- reg = <0x44d00000 0x4000 /* M3 UMEM */ +- 0x44d80000 0x2000>; /* M3 DMEM */ ++ reg = <0x44d00000 0x4000 ++ 0x44d80000 0x2000 ++ 0x44e11324 0x0024>; ++ reg-names = "m3_umem", "m3_dmem", "ipc_regs"; ++ interrupts = <78>; + ti,hwmods = "wkup_m3"; ++ ti,no-reset; ++ clocks = <&dpll_core_m4_div2_ck>; ++ clock-names = "fck"; + }; + + elm: elm@48080000 { +@@ -614,6 +792,8 @@ + reg = <0x48080000 0x2000>; + interrupts = <4>; + ti,hwmods = "elm"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; + status = "disabled"; + }; + +@@ -623,6 +803,8 @@ + interrupt-parent = <&intc>; + interrupts = <16>; + ti,hwmods = "adc_tsc"; ++ clocks = <&adc_tsc_fck>; ++ clock-names = "fck"; + status = "disabled"; + + tsc { +@@ -637,6 +819,9 @@ + gpmc: gpmc@50000000 { + compatible = "ti,am3352-gpmc"; + ti,hwmods = "gpmc"; ++ ti,no-idle; ++ clocks = <&l3s_gclk>; ++ clock-names = "fck"; + reg = <0x50000000 0x2000>; + interrupts = <100>; + gpmc,num-cs = <7>; +@@ -645,5 +830,102 @@ + #size-cells = <1>; + status = "disabled"; + }; ++ ++ prcm: prcm@44e00000 { ++ compatible = "ti,am3352-prcm"; ++ reg = <0x44e00000 0x1300>; ++ #reset-cells = <1>; ++ }; ++ ++ sham: sham@53100000 { ++ compatible = "ti,omap4-sham"; ++ ti,hwmods = "sham"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x53100000 0x200>; ++ interrupt-parent = <&intc>; ++ interrupts = <109>; ++ dmas = <&edma 36>; ++ dma-names = "rx"; ++ clocks = <&l3_gclk>; ++ clock-names = "fck"; ++ }; ++ ++ aes: aes@53500000 { ++ compatible = "ti,omap4-aes"; ++ ti,hwmods = "aes"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x53500000 0xa0>; ++ interrupt-parent = <&intc>; ++ interrupts = <103>; ++ dmas = <&edma 6 ++ &edma 5>; ++ dma-names = "tx", "rx"; ++ clocks = <&aes0_fck>; ++ clock-names = "fck"; ++ }; ++ ++ rng: rng@48310000 { ++ compatible = "ti,omap4-rng"; ++ ti,hwmods = "rng"; ++ reg = <0x48310000 0x2000>; ++ interrupts = <111>; ++ clocks = <&rng_fck>; ++ clock-names = "fck"; ++ }; ++ ++ lcdc: lcdc@0x4830e000 { ++ compatible = "ti,am33xx-tilcdc"; ++ reg = <0x4830e000 0x1000>; ++ interrupt-parent = <&intc>; ++ interrupts = <36>; ++ clocks = <&lcd_gclk>; ++ clock-names = "fck"; ++ ti,hwmods = "lcdc"; ++ status = "disabled"; ++ }; ++ ++ mcasp0: mcasp@48038000 { ++ compatible = "ti,omap2-mcasp-audio"; ++ ti,hwmods = "mcasp0"; ++ reg = <0x48038000 0x2000>, ++ <0x46400000 0x400000>; ++ reg-names = "mpu", "dma"; ++ interrupts = <80 81>; ++ interrupts-names = "tx", "rx"; ++ status = "disabled"; ++ dmas = <&edma 8 ++ &edma 9>; ++ dma-names = "tx", "rx"; ++ }; ++ ++ mcasp1: mcasp@4803C000 { ++ compatible = "ti,omap2-mcasp-audio"; ++ ti,hwmods = "mcasp1"; ++ reg = <0x4803C000 0x2000>, ++ <0x46400000 0x400000>; ++ reg-names = "mpu", "dma"; ++ interrupts = <82 83>; ++ interrupts-names = "tx", "rx"; ++ status = "disabled"; ++ dmas = <&edma 10 ++ &edma 11>; ++ dma-names = "tx", "rx"; ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "am33xx-clocks.dtsi" + }; ++ ++ clockdomains { ++ clk_24mhz_clkdm: clk_24mhz_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&clkdiv32k_ick>; ++ }; ++ }; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/am3517.dtsi +@@ -0,0 +1,116 @@ ++/* ++ * Device Tree Source for AM3517 SoC ++ * ++ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ ++ * ++ * This file is licensed under the terms of the GNU General Public License ++ * version 2. This program is licensed "as is" without any warranty of any ++ * kind, whether express or implied. ++ */ ++ ++#include "omap3.dtsi" ++ ++/ { ++ cpus { ++ cpu@0 { ++ /* OMAP343x/OMAP35xx variants OPP1-5 */ ++ operating-points = < ++ /* kHz uV */ ++ 125000 975000 ++ 250000 1075000 ++ 500000 1200000 ++ 550000 1270000 ++ 600000 1350000 ++ >; ++ clock-latency = <300000>; /* From legacy driver */ ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "am35xx-clocks.dtsi" ++ /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" ++ }; ++ ++ clockdomains { ++ dss_clkdm: dss_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>; ++ }; ++ ++ usbhost_clkdm: usbhost_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&usbhost_48m_fck>, <&usbhost_ick>; ++ }; ++ ++ core_l4_clkdm: core_l4_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&mmchs1_ick>, <&mmchs2_ick>, <&hdq_fck>, ++ <&uart1_ick>, <&mcspi4_fck>, <&i2c3_fck>, ++ <&mcspi2_ick>, <&uart2_ick>, <&mcspi3_ick>, ++ <&i2c1_fck>, <&hdq_ick>, <&sha12_ick>, ++ <&mcbsp5_ick>, <&mcspi3_fck>, <&aes2_ick>, ++ <&mcspi1_ick>, <&uart2_fck>, <&mmchs2_fck>, ++ <&mmchs1_fck>, <&i2c3_ick>, <&mcspi1_fck>, ++ <&mcspi4_ick>, <&omapctrl_ick>, <&mcbsp1_ick>, ++ <&mcspi2_fck>, <&gpt10_ick>, <&i2c2_fck>, ++ <&i2c2_ick>, <&gpt11_ick>, <&i2c1_ick>, ++ <&uart1_fck>; ++ }; ++ ++ wkup_clkdm: wkup_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&wdt1_ick>, <&gpt12_ick>, <&gpio1_ick>, ++ <&gpt1_ick>, <&omap_32ksync_ick>, <&wdt2_ick>, ++ <&wdt2_fck>; ++ }; ++ ++ dpll4_clkdm: dpll4_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll4_ck>; ++ }; ++ ++ core_l3_clkdm: core_l3_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&sdrc_ick>; ++ }; ++ ++ per_clkdm: per_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&gpt2_ick>, <&uart3_fck>, <&gpio3_ick>, ++ <&mcbsp2_ick>, <&gpt6_ick>, <&mcbsp4_ick>, ++ <&gpt4_ick>, <&mcbsp3_ick>, <&gpt8_ick>, ++ <&uart3_ick>, <&gpt5_ick>, <&gpt7_ick>, ++ <&gpio2_ick>, <&gpio6_ick>, <&gpt9_ick>, ++ <&gpt3_ick>, <&gpio5_ick>, <&wdt3_ick>, ++ <&gpio4_ick>, <&wdt3_fck>, <&uart4_ick>; ++ }; ++ ++ emu_clkdm: emu_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&emu_src_ck>; ++ }; ++ ++ sgx_clkdm: sgx_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&sgx_ick>; ++ }; ++ ++ dpll3_clkdm: dpll3_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll3_ck>; ++ }; ++ ++ dpll5_clkdm: dpll5_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll5_ck>; ++ }; ++ ++ dpll1_clkdm: dpll1_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll1_ck>; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/am3517-evm.dts ++++ b/arch/arm/boot/dts/am3517-evm.dts +@@ -7,7 +7,7 @@ + */ + /dts-v1/; + +-#include "omap34xx.dtsi" ++#include "am3517.dtsi" + + / { + model = "TI AM3517 EVM (AM3517/05)"; +--- a/arch/arm/boot/dts/am3517_mt_ventoux.dts ++++ b/arch/arm/boot/dts/am3517_mt_ventoux.dts +@@ -7,7 +7,7 @@ + */ + /dts-v1/; + +-#include "omap34xx.dtsi" ++#include "am3517.dtsi" + + / { + model = "TeeJet Mt.Ventoux"; +--- /dev/null ++++ b/arch/arm/boot/dts/am35xx-clocks.dtsi +@@ -0,0 +1,101 @@ ++/* ++ * Device Tree Source for AM35xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ipss_ick: ipss_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,am35xx-interface-clock"; ++ clocks = <&core_l3_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <4>; ++}; ++ ++rmii_ck: rmii_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <50000000>; ++}; ++ ++pclk_ck: pclk_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <27000000>; ++}; ++ ++emac_ick: emac_ick@4800259c { ++ #clock-cells = <0>; ++ compatible = "ti,am35xx-gate-clock"; ++ clocks = <&ipss_ick>; ++ reg = <0x4800259c 0x4>; ++ ti,enable-bit = <1>; ++}; ++ ++emac_fck: emac_fck@4800259c { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&rmii_ck>; ++ reg = <0x4800259c 0x4>; ++ bit-shift = <9>; ++}; ++ ++vpfe_ick: vpfe_ick@4800259c { ++ #clock-cells = <0>; ++ compatible = "ti,am35xx-gate-clock"; ++ clocks = <&ipss_ick>; ++ reg = <0x4800259c 0x4>; ++ ti,enable-bit = <2>; ++}; ++ ++vpfe_fck: vpfe_fck@4800259c { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&pclk_ck>; ++ reg = <0x4800259c 0x4>; ++ bit-shift = <10>; ++}; ++ ++hsotgusb_ick: hsotgusb_ick@4800259c { ++ #clock-cells = <0>; ++ compatible = "ti,am35xx-gate-clock"; ++ clocks = <&ipss_ick>; ++ reg = <0x4800259c 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++hsotgusb_fck_am35xx: hsotgusb_fck_am35xx@4800259c { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x4800259c 0x4>; ++ bit-shift = <8>; ++}; ++ ++hecc_ck: hecc_ck@4800259c { ++ #clock-cells = <0>; ++ compatible = "ti,am35xx-gate-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x4800259c 0x4>; ++ ti,enable-bit = <3>; ++}; ++ ++uart4_ick_am35xx: uart4_ick_am35xx@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <23>; ++}; ++ ++uart4_fck_am35xx: uart4_fck_am35xx@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <23>; ++}; +--- a/arch/arm/boot/dts/am4372.dtsi ++++ b/arch/arm/boot/dts/am4372.dtsi +@@ -8,6 +8,7 @@ + * kind, whether express or implied. + */ + ++#include + #include + + #include "skeleton.dtsi" +@@ -18,12 +19,21 @@ + + + aliases { ++ i2c0 = &i2c0; ++ i2c1 = &i2c1; ++ i2c2 = &i2c2; + serial0 = &uart0; ++ ethernet0 = &cpsw_emac0; ++ ethernet1 = &cpsw_emac1; + }; + + cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; + cpu@0 { + compatible = "arm,cortex-a9"; ++ device_type = "cpu"; ++ reg = <0>; + }; + }; + +@@ -35,16 +45,124 @@ + <0x48240100 0x0100>; + }; + ++ l2-cache-controller@48242000 { ++ compatible = "arm,pl310-cache"; ++ reg = <0x48242000 0x1000>; ++ cache-unified; ++ cache-level = <2>; ++ }; ++ ++ am43xx_pinmux: pinmux@44e10800 { ++ compatible = "pinctrl-single"; ++ reg = <0x44e10800 0x31c>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-single,register-width = <32>; ++ pinctrl-single,function-mask = <0xffffffff>; ++ }; ++ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; ++ ti,hwmods = "l3_main"; ++ clocks = <&l3_gclk>; ++ clock-names = "fck"; ++ ++ edma: edma@49000000 { ++ compatible = "ti,edma3"; ++ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; ++ reg = <0x49000000 0x10000>, ++ <0x44e10f90 0x10>; ++ interrupts = , ++ , ++ ; ++ #dma-cells = <1>; ++ dma-channels = <64>; ++ ti,edma-regions = <4>; ++ ti,edma-slots = <256>; ++ }; + + uart0: serial@44e09000 { + compatible = "ti,am4372-uart","ti,omap2-uart"; + reg = <0x44e09000 0x2000>; + interrupts = ; ++ ti,hwmods = "uart1"; ++ clocks = <&dpll_per_m2_div4_wkupdm_ck>; ++ clock-names = "fck"; ++ }; ++ ++ uart1: serial@48022000 { ++ compatible = "ti,am4372-uart","ti,omap2-uart"; ++ reg = <0x48022000 0x2000>; ++ interrupts = ; ++ ti,hwmods = "uart2"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ uart2: serial@48024000 { ++ compatible = "ti,am4372-uart","ti,omap2-uart"; ++ reg = <0x48024000 0x2000>; ++ interrupts = ; ++ ti,hwmods = "uart3"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ uart3: serial@481a6000 { ++ compatible = "ti,am4372-uart","ti,omap2-uart"; ++ reg = <0x481a6000 0x2000>; ++ interrupts = ; ++ ti,hwmods = "uart4"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ uart4: serial@481a8000 { ++ compatible = "ti,am4372-uart","ti,omap2-uart"; ++ reg = <0x481a8000 0x2000>; ++ interrupts = ; ++ ti,hwmods = "uart5"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ uart5: serial@481aa000 { ++ compatible = "ti,am4372-uart","ti,omap2-uart"; ++ reg = <0x481aa000 0x2000>; ++ interrupts = ; ++ ti,hwmods = "uart6"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ mailbox: mailbox@480C8000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x480C8000 0x200>; ++ interrupts = ; ++ ti,hwmods = "mailbox"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <8>; ++ ti,mbox-names = "wkup_m3"; ++ ti,mbox-data = <0 0 0 0>; ++ }; ++ ++ qspi: qspi@47900000 { ++ compatible = "ti,am4372-qspi"; ++ reg = <0x47900000 0x100>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "qspi"; ++ interrupts = <0 138 0x4>; ++ num-cs = <4>; ++ mmap_read; + }; + + timer1: timer@44e31000 { +@@ -52,17 +170,818 @@ + reg = <0x44e31000 0x400>; + interrupts = ; + ti,timer-alwon; ++ ti,hwmods = "timer1"; ++ clocks = <&timer1_fck>; ++ clock-names = "fck"; + }; + + timer2: timer@48040000 { + compatible = "ti,am4372-timer","ti,am335x-timer"; + reg = <0x48040000 0x400>; + interrupts = ; ++ ti,hwmods = "timer2"; ++ clocks = <&timer2_fck>; ++ clock-names = "fck"; ++ }; ++ ++ timer3: timer@48042000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x48042000 0x400>; ++ interrupts = ; ++ ti,hwmods = "timer3"; ++ clocks = <&timer3_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer4: timer@48044000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x48044000 0x400>; ++ interrupts = ; ++ ti,timer-pwm; ++ ti,hwmods = "timer4"; ++ clocks = <&timer4_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer5: timer@48046000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x48046000 0x400>; ++ interrupts = ; ++ ti,timer-pwm; ++ ti,hwmods = "timer5"; ++ clocks = <&timer5_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer6: timer@48048000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x48048000 0x400>; ++ interrupts = ; ++ ti,timer-pwm; ++ ti,hwmods = "timer6"; ++ clocks = <&timer6_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer7: timer@4804a000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x4804a000 0x400>; ++ interrupts = ; ++ ti,timer-pwm; ++ ti,hwmods = "timer7"; ++ clocks = <&timer7_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer8: timer@481c1000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x481c1000 0x400>; ++ interrupts = ; ++ ti,hwmods = "timer8"; ++ clocks = <&timer8_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer9: timer@4833d000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x4833d000 0x400>; ++ interrupts = ; ++ ti,hwmods = "timer9"; ++ clocks = <&timer9_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer10: timer@4833f000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x4833f000 0x400>; ++ interrupts = ; ++ ti,hwmods = "timer10"; ++ clocks = <&timer10_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ timer11: timer@48341000 { ++ compatible = "ti,am4372-timer","ti,am335x-timer"; ++ reg = <0x48341000 0x400>; ++ interrupts = ; ++ ti,hwmods = "timer11"; ++ clocks = <&timer11_fck>; ++ clock-names = "fck"; ++ status = "disabled"; + }; + + counter32k: counter@44e86000 { + compatible = "ti,am4372-counter32k","ti,omap-counter32k"; + reg = <0x44e86000 0x40>; ++ ti,hwmods = "counter_32k"; ++ clocks = <&synctimer_32kclk>; ++ clock-names = "fck"; ++ }; ++ ++ rtc: rtc@44e3e000 { ++ compatible = "ti,am4372-rtc","ti,da830-rtc"; ++ reg = <0x44e3e000 0x1000>; ++ interrupts = ; ++ ti,hwmods = "rtc"; ++ clocks = <&clk_32768_ck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ wdt@44e35000 { ++ compatible = "ti,am4372-wdt","ti,omap3-wdt"; ++ reg = <0x44e35000 0x1000>; ++ interrupts = ; ++ ti,hwmods = "wd_timer2"; ++ clocks = <&wdt1_fck>; ++ clock-names = "fck"; ++ }; ++ ++ gpio0: gpio@44e07000 { ++ compatible = "ti,am4372-gpio","ti,omap4-gpio"; ++ reg = <0x44e07000 0x1000>; ++ interrupts = ; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ti,hwmods = "gpio1"; ++ clocks = <&sys_clkin_ck>, <&gpio0_dbclk>; ++ clock-names = "fck", "dbclk"; ++ status = "disabled"; ++ }; ++ ++ gpio1: gpio@4804c000 { ++ compatible = "ti,am4372-gpio","ti,omap4-gpio"; ++ reg = <0x4804c000 0x1000>; ++ interrupts = ; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ti,hwmods = "gpio2"; ++ clocks = <&l4ls_gclk>, <&gpio1_dbclk>; ++ clock-names = "fck", "dbclk"; ++ status = "disabled"; ++ }; ++ ++ gpio2: gpio@481ac000 { ++ compatible = "ti,am4372-gpio","ti,omap4-gpio"; ++ reg = <0x481ac000 0x1000>; ++ interrupts = ; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ti,hwmods = "gpio3"; ++ clocks = <&l4ls_gclk>, <&gpio2_dbclk>; ++ clock-names = "fck", "dbclk"; ++ status = "disabled"; ++ }; ++ ++ gpio3: gpio@481ae000 { ++ compatible = "ti,am4372-gpio","ti,omap4-gpio"; ++ reg = <0x481ae000 0x1000>; ++ interrupts = ; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ti,hwmods = "gpio4"; ++ clocks = <&l4ls_gclk>, <&gpio3_dbclk>; ++ clock-names = "fck", "dbclk"; ++ status = "disabled"; ++ }; ++ ++ gpio4: gpio@48320000 { ++ compatible = "ti,am4372-gpio","ti,omap4-gpio"; ++ reg = <0x48320000 0x1000>; ++ interrupts = ; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ti,hwmods = "gpio5"; ++ clocks = <&l4ls_gclk>, <&gpio4_dbclk>; ++ clock-names = "fck", "dbclk"; ++ status = "disabled"; ++ }; ++ ++ gpio5: gpio@48322000 { ++ compatible = "ti,am4372-gpio","ti,omap4-gpio"; ++ reg = <0x48322000 0x1000>; ++ interrupts = ; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ti,hwmods = "gpio6"; ++ clocks = <&l4ls_gclk>, <&gpio5_dbclk>; ++ clock-names = "fck", "dbclk"; ++ status = "disabled"; ++ }; ++ ++ i2c0: i2c@44e0b000 { ++ compatible = "ti,am4372-i2c","ti,omap4-i2c"; ++ reg = <0x44e0b000 0x1000>; ++ interrupts = ; ++ ti,hwmods = "i2c1"; ++ clocks = <&dpll_per_m2_div4_wkupdm_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ ++ tps: tps@24 { ++ reg = <0x24>; ++ }; ++ }; ++ ++ i2c1: i2c@4802a000 { ++ compatible = "ti,am4372-i2c","ti,omap4-i2c"; ++ reg = <0x4802a000 0x1000>; ++ interrupts = ; ++ ti,hwmods = "i2c2"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ i2c2: i2c@4819c000 { ++ compatible = "ti,am4372-i2c","ti,omap4-i2c"; ++ reg = <0x4819c000 0x1000>; ++ interrupts = ; ++ ti,hwmods = "i2c3"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ spi0: spi@48030000 { ++ compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; ++ reg = <0x48030000 0x400>; ++ interrupts = ; ++ ti,hwmods = "spi0"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; + }; ++ ++ mmc1: mmc@48060000 { ++ compatible = "ti,omap4-hsmmc"; ++ reg = <0x48060000 0x1000>; ++ ti,hwmods = "mmc1"; ++ clocks = <&mmc_clk>, <&clkdiv32k_ick>; ++ clock-names = "fck", "mmchsdb_fck"; ++ ti,dual-volt; ++ ti,needs-special-reset; ++ dmas = <&edma 24 ++ &edma 25>; ++ dma-names = "tx", "rx"; ++ interrupts = ; ++ status = "disabled"; ++ }; ++ ++ mmc2: mmc@481d8000 { ++ compatible = "ti,omap4-hsmmc"; ++ reg = <0x481d8000 0x1000>; ++ ti,hwmods = "mmc2"; ++ clocks = <&mmc_clk>, <&clkdiv32k_ick>; ++ clock-names = "fck", "mmchsdb_fck"; ++ ti,needs-special-reset; ++ dmas = <&edma 2 ++ &edma 3>; ++ dma-names = "tx", "rx"; ++ interrupts = ; ++ status = "disabled"; ++ }; ++ ++ mmc3: mmc@47810000 { ++ compatible = "ti,omap4-hsmmc"; ++ reg = <0x47810000 0x1000>; ++ ti,hwmods = "mmc3"; ++ clocks = <&mmc_clk>, <&clkdiv32k_ick>; ++ clock-names = "fck", "mmchsdb_fck"; ++ ti,needs-special-reset; ++ interrupts = ; ++ status = "disabled"; ++ }; ++ ++ spi1: spi@481a0000 { ++ compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; ++ reg = <0x481a0000 0x400>; ++ interrupts = ; ++ ti,hwmods = "spi1"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ spi2: spi@481a2000 { ++ compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; ++ reg = <0x481a2000 0x400>; ++ interrupts = ; ++ ti,hwmods = "spi2"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ spi3: spi@481a4000 { ++ compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; ++ reg = <0x481a4000 0x400>; ++ interrupts = ; ++ ti,hwmods = "spi3"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ spi4: spi@48345000 { ++ compatible = "ti,am4372-mcspi","ti,omap4-mcspi"; ++ reg = <0x48345000 0x400>; ++ interrupts = ; ++ ti,hwmods = "spi4"; ++ clocks = <&dpll_per_m2_div4_ck>; ++ clock-names = "fck"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ ++ mac: ethernet@4a100000 { ++ compatible = "ti,am4372-cpsw","ti,cpsw"; ++ reg = <0x4a100000 0x800 ++ 0x4a101200 0x100>; ++ interrupts = ; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ti,hwmods = "cpgmac0"; ++ clocks = <&cpsw_125mhz_gclk>; ++ clock-names = "fck"; ++ cpdma_channels = <8>; ++ ale_entries = <1024>; ++ bd_ram_size = <0x2000>; ++ no_bd_ram = <0>; ++ rx_descs = <64>; ++ mac_control = <0x20>; ++ slaves = <2>; ++ active_slave = <0>; ++ cpts_clock_mult = <0x80000000>; ++ cpts_clock_shift = <29>; ++ ranges; ++ status = "disabled"; ++ ++ davinci_mdio: mdio@4a101000 { ++ compatible = "ti,am4372-mdio","ti,davinci_mdio"; ++ reg = <0x4a101000 0x100>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "davinci_mdio"; ++ clocks = <&cpsw_125mhz_gclk>; ++ clock-names = "fck"; ++ bus_freq = <1000000>; ++ status = "disabled"; ++ }; ++ ++ cpsw_emac0: slave@4a100200 { ++ /* Filled in by U-Boot */ ++ mac-address = [ 00 00 00 00 00 00 ]; ++ }; ++ ++ cpsw_emac1: slave@4a100300 { ++ /* Filled in by U-Boot */ ++ mac-address = [ 00 00 00 00 00 00 ]; ++ }; ++ ++ phy_sel: cpsw-phy-sel@44e10650 { ++ compatible = "ti,am3352-cpsw-phy-sel"; ++ reg= <0x44e10650 0x4>; ++ reg-names = "gmii-sel"; ++ }; ++ }; ++ ++ epwmss0: epwmss@48300000 { ++ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; ++ reg = <0x48300000 0x10>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "epwmss0"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ ++ ecap0: ecap@48300100 { ++ compatible = "ti,am4372-ecap","ti,am33xx-ecap"; ++ reg = <0x48300100 0x80>; ++ ti,hwmods = "ecap0"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ ehrpwm0: ehrpwm@48300200 { ++ compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; ++ reg = <0x48300200 0x80>; ++ ti,hwmods = "ehrpwm0"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ }; ++ ++ epwmss1: epwmss@48302000 { ++ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; ++ reg = <0x48302000 0x10>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "epwmss1"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ ++ ecap1: ecap@48302100 { ++ compatible = "ti,am4372-ecap","ti,am33xx-ecap"; ++ reg = <0x48302100 0x80>; ++ ti,hwmods = "ecap1"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ ehrpwm1: ehrpwm@48302200 { ++ compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; ++ reg = <0x48302200 0x80>; ++ ti,hwmods = "ehrpwm1"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ }; ++ ++ epwmss2: epwmss@48304000 { ++ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; ++ reg = <0x48304000 0x10>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "epwmss2"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ ++ ecap2: ecap@48304100 { ++ compatible = "ti,am4372-ecap","ti,am33xx-ecap"; ++ reg = <0x48304100 0x80>; ++ ti,hwmods = "ecap2"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ ehrpwm2: ehrpwm@48304200 { ++ compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; ++ reg = <0x48304200 0x80>; ++ ti,hwmods = "ehrpwm2"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ }; ++ ++ epwmss3: epwmss@48306000 { ++ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; ++ reg = <0x48306000 0x10>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "epwmss3"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ ++ ehrpwm3: ehrpwm@48306200 { ++ compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; ++ reg = <0x48306200 0x80>; ++ ti,hwmods = "ehrpwm3"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ }; ++ ++ epwmss4: epwmss@48308000 { ++ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; ++ reg = <0x48308000 0x10>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "epwmss4"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ ++ ehrpwm4: ehrpwm@48308200 { ++ compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; ++ reg = <0x48308200 0x80>; ++ ti,hwmods = "ehrpwm4"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ }; ++ ++ epwmss5: epwmss@4830a000 { ++ compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; ++ reg = <0x4830a000 0x10>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "epwmss5"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ ++ ehrpwm5: ehrpwm@4830a200 { ++ compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm"; ++ reg = <0x4830a200 0x80>; ++ ti,hwmods = "ehrpwm5"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ }; ++ ++ wkup_m3: wkup_m3@44d00000 { ++ compatible = "ti,am4372-wkup-m3","ti,am3353-wkup-m3"; ++ reg = <0x44d00000 0x4000 /* M3 UMEM */ ++ 0x44d80000 0x2000>; /* M3 DMEM */ ++ ti,hwmods = "wkup_m3"; ++ clocks = <&sys_clkin_ck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ tscadc: tscadc@44e0d000 { ++ compatible = "ti,am4372-tscadc","ti,am3359-tscadc"; ++ reg = <0x44e0d000 0x1000>; ++ ti,hwmods = "adc_tsc"; ++ clocks = <&adc_tsc_fck>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ ocmcram: ocmcram@40300000 { ++ compatible = "ti,am4372-ocmcram","ti,am3352-ocmcram"; ++ reg = <0x40300000 0x40000>; ++ ti,hwmods = "ocmcram"; ++ clocks = <&l3_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ dcan0: d_can@481cc000 { ++ compatible = "bosch,d_can"; ++ ti,hwmods = "d_can0"; ++ clocks = <&dcan0_fck>; ++ clock-names = "fck"; ++ reg = <0x481cc000 0x2000 ++ 0x44e10644 0x4>; ++ status = "disabled"; ++ }; ++ ++ dcan1: d_can@481d0000 { ++ compatible = "bosch,d_can"; ++ ti,hwmods = "d_can1"; ++ clocks = <&dcan1_fck>; ++ clock-names = "fck"; ++ reg = <0x481d0000 0x2000 ++ 0x44e10644 0x4>; ++ status = "disabled"; ++ }; ++ ++ elm: elm@48080000 { ++ compatible = "ti,am4372-elm","ti,am3352-elm"; ++ reg = <0x48080000 0x2000>; ++ ti,hwmods = "elm"; ++ clocks = <&l4ls_gclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ gpmc: gpmc@50000000 { ++ compatible = "ti,am4372-gpmc","ti,am3352-gpmc"; ++ ti,hwmods = "gpmc"; ++ clocks = <&l3s_gclk>; ++ clock-names = "fck"; ++ reg = <0x50000000 0x2000>; ++ status = "disabled"; ++ }; ++ ++ prcm: prcm@44df0000 { ++ compatible = "ti,am4372-prcm"; ++ reg = <0x44df0000 0xa000>; ++ #reset-cells = <1>; ++ }; ++ ++ rng: rng@48310000 { ++ compatible = "ti,omap4-rng"; ++ ti,hwmods = "rng"; ++ reg = <0x48310000 0x2000>; ++ interrupts = ; ++ clocks = <&rng_fck>; ++ clock-names = "fck"; ++ }; ++ ++ sham: sham@53100000 { ++ compatible = "ti,omap5-sham"; ++ ti,hwmods = "sham"; ++ reg = <0x53100000 0x300>; ++ dmas = <&edma 36>; ++ dma-names = "rx"; ++ interrupts = ; ++ clocks = <&l3_gclk>; ++ clock-names = "fck"; ++ }; ++ ++ aes: aes@53501000 { ++ compatible = "ti,omap4-aes"; ++ ti,hwmods = "aes"; ++ reg = <0x53501000 0xa0>; ++ interrupts = ; ++ dmas = <&edma 6 ++ &edma 5>; ++ dma-names = "tx", "rx"; ++ clocks = <&aes0_fck>; ++ clock-names = "fck"; ++ }; ++ ++ des: des@53701000 { ++ compatible = "ti,omap4-des"; ++ ti,hwmods = "des"; ++ reg = <0x53701000 0xa0>; ++ interrupts = ; ++ dmas = <&edma 34 ++ &edma 33>; ++ dma-names = "tx", "rx"; ++ clocks = <&l3_gclk>; ++ clock-names = "fck"; ++ }; ++ ++ am43xx_control_usb2phy1: control-phy@44e10620 { ++ compatible = "ti,control-phy-am437usb2"; ++ reg = <0x44e10620 0x4>; ++ reg-names = "power"; ++ }; ++ ++ am43xx_control_usb2phy2: control-phy@0x44e10628 { ++ compatible = "ti,control-phy-am437usb2"; ++ reg = <0x44e10628 0x4>; ++ reg-names = "power"; ++ }; ++ ++ ocp2scp0: ocp2scp@483a8000 { ++ compatible = "ti,omap-ocp2scp"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "ocp2scp0"; ++ ++ usb2_phy1: usb2phy1@483a8000 { ++ compatible = "ti,am437x-usb2"; ++ reg = <0x483a8000 0x8000>; ++ ctrl-module = <&am43xx_control_usb2phy1>; ++ clocks = <&clk_32768_ck>, ++ <&usb_otg_ss0_refclk960m>; ++ clock-names = "wkupclk", ++ "refclk"; ++ #phy-cells = <0>; ++ }; ++ ++ }; ++ ++ ocp2scp1: ocp2scp@483e8000 { ++ compatible = "ti,omap-ocp2scp"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "ocp2scp1"; ++ ++ usb2_phy2: usb2phy2@483e8000 { ++ compatible = "ti,am437x-usb2"; ++ reg = <0x483e8000 0x8000>; ++ ctrl-module = <&am43xx_control_usb2phy2>; ++ clocks = <&clk_32768_ck>, ++ <&usb_otg_ss1_refclk960m>; ++ clock-names = "wkupclk", ++ "refclk"; ++ #phy-cells = <0>; ++ }; ++ ++ }; ++ ++ dwc3_1: omap_dwc3_1@48380000 { ++ compatible = "ti,am437x-dwc3"; ++ ti,hwmods = "usb_otg_ss0"; ++ reg = <0x48380000 0x10000>; ++ interrupts = ; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ utmi-mode = <1>; ++ ranges; ++ usb1: usb@48390000 { ++ compatible = "synopsys,dwc3"; ++ reg = <0x48390000 0x17000>; ++ interrupts = ; ++ phys = <&usb2_phy1>; ++ phy-names = "usb2-phy"; ++ maximum-speed = "high-speed"; ++ dr_mode = "peripheral"; ++ }; ++ }; ++ ++ dwc3_2: omap_dwc3_2@483c0000 { ++ compatible = "ti,am437x-dwc3"; ++ ti,hwmods = "usb_otg_ss1"; ++ reg = <0x483c0000 0x10000>; ++ interrupts = ; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ utmi-mode = <1>; ++ ranges; ++ usb2: usb@483d0000 { ++ compatible = "synopsys,dwc3"; ++ reg = <0x483d0000 0x17000>; ++ interrupts = ; ++ phys = <&usb2_phy2>; ++ phy-names = "usb2-phy"; ++ maximum-speed = "high-speed"; ++ dr_mode = "host"; ++ }; ++ }; ++ ++ dss: dss@4832A000 { ++ compatible = "ti,omap3-dss", "simple-bus"; ++ reg = <0x4832A000 0x200>; ++ ti,hwmods = "dss_core"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ dispc@4832A400 { ++ compatible = "ti,omap3-dispc"; ++ reg = <0x4832A400 0x400>; ++ interrupts = ; ++ ti,hwmods = "dss_dispc"; ++ }; ++ ++ dpi: encoder@0 { ++ compatible = "ti,omap3-dpi"; ++ }; ++ ++ rfbi: rfbi@4832A800 { ++ compatible = "ti,omap3-rfbi"; ++ reg = <0x4832A800 0x100>; ++ ti,hwmods = "dss_rfbi"; ++ }; ++ ++ }; ++ + }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "am43xx-clocks.dtsi" ++ }; ++ + }; ++ ++/include/ "tps65218.dtsi" +--- /dev/null ++++ b/arch/arm/boot/dts/am437x-gp-evm.dts +@@ -0,0 +1,238 @@ ++/* ++ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++/* AM437x GP EVM */ ++ ++/dts-v1/; ++ ++#include "am43x-common-evm.dtsi" ++#include ++ ++/ { ++ model = "TI AM437x gp EVM"; ++ compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43"; ++ ++ vmmcsd_fixed: fixedregulator-sd { ++ compatible = "regulator-fixed"; ++ regulator-name = "vmmcsd_fixed"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ enable-active-high; ++ }; ++ ++ aliases { ++ display0 = &lcd0; ++ display1 = &hdmi0; ++ }; ++ ++ lcd0: display@0 { ++ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; ++ video-source = <&dpi>; ++ data-lines = <24>; ++ gpios = <0 /* No Enable GPIO */ ++ &gpio0 7 GPIO_ACTIVE_LOW>; /* LCD backlight GPIO */ ++ activelow_backlight; /* LCD backlight is Active low */ ++ panel-timing { ++ clock-frequency = <33000000>; ++ hactive = <800>; ++ vactive = <480>; ++ hfront-porch = <210>; ++ hback-porch = <16>; ++ hsync-len = <30>; ++ vback-porch = <10>; ++ vfront-porch = <22>; ++ vsync-len = <13>; ++ hsync-active = <0>; ++ vsync-active = <0>; ++ de-active = <1>; ++ pixelclk-active = <1>; ++ }; ++ }; ++ ++ hdmi0: connector@1 { ++ compatible = "ti,hdmi_connector"; ++ video-source = <&sii9022>; ++ }; ++}; ++ ++&am43xx_pinmux { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dss_pinctrl>; ++ cpsw_default: cpsw_default { ++ pinctrl-single,pins = < ++ /* Slave 1 */ ++ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */ ++ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */ ++ 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */ ++ 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */ ++ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */ ++ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */ ++ 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ ++ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ ++ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */ ++ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */ ++ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ ++ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ ++ >; ++ }; ++ ++ cpsw_sleep: cpsw_sleep { ++ pinctrl-single,pins = < ++ /* Slave 1 reset value */ ++ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ >; ++ }; ++ ++ davinci_mdio_default: davinci_mdio_default { ++ pinctrl-single,pins = < ++ /* MDIO */ ++ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ ++ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ ++ >; ++ }; ++ ++ davinci_mdio_sleep: davinci_mdio_sleep { ++ pinctrl-single,pins = < ++ /* MDIO reset value */ ++ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ >; ++ }; ++ ++ mmc1_pins: pinmux_mmc1_pins { ++ pinctrl-single,pins = < ++ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ ++ >; ++ }; ++ ++ i2c0_pins: pinmux_i2c0_pins { ++ pinctrl-single,pins = < ++ 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ ++ 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ ++ >; ++ }; ++ ++ i2c1_pins: i2c1_pins { ++ pinctrl-single,pins = < ++ 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ ++ 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ ++ >; ++ }; ++ ++ dss_pinctrl: dss_pinctrl { ++ pinctrl-single,pins = < ++ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ ++ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ ++ 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ ++ 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ ++ 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ ++ 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ ++ 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ ++ 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ ++ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* GPIO 5_8 to select LCD / HDMI */ ++ 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* ECAP0_IN_PWM0_OUT -> GPIO 0_7 BACKLIGHT */ ++ >; ++ }; ++}; ++ ++&rtc { ++ status = "okay"; ++}; ++ ++&gpio0 { ++ status = "okay"; ++}; ++ ++&gpio5 { ++ status = "okay"; ++}; ++ ++&mac { ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&cpsw_default>; ++ pinctrl-1 = <&cpsw_sleep>; ++ status = "okay"; ++}; ++ ++&davinci_mdio { ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&davinci_mdio_default>; ++ pinctrl-1 = <&davinci_mdio_sleep>; ++ status = "okay"; ++}; ++ ++&cpsw_emac0 { ++ phy_id = <&davinci_mdio>, <0>; ++ phy-mode = "rgmii"; ++}; ++ ++&cpsw_emac1 { ++ phy_id = <&davinci_mdio>, <1>; ++ phy-mode = "rgmii"; ++}; ++ ++&mmc1 { ++ status = "okay"; ++ vmmc-supply = <&vmmcsd_fixed>; ++ bus-width = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++}; ++ ++&i2c1 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ ++ sii9022: sii9022@3b { ++ compatible = "sii,sii9022"; ++ reg = <0x3b>; ++ reset-gpio = <&gpio5 8 GPIO_ACTIVE_LOW>;/* 'SelLCDorHDMI' Gpio, LOW to select HDMI */ ++ video-source = <&dpi>; ++ data-lines = <24>; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/am43x-common-evm.dtsi +@@ -0,0 +1,9 @@ ++/* ++ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include "am4372.dtsi" +--- a/arch/arm/boot/dts/am43x-epos-evm.dts ++++ b/arch/arm/boot/dts/am43x-epos-evm.dts +@@ -10,9 +10,289 @@ + + /dts-v1/; + +-#include "am4372.dtsi" ++#include "am43x-common-evm.dtsi" ++#include + + / { + model = "TI AM43x EPOS EVM"; + compatible = "ti,am43x-epos-evm","ti,am4372","ti,am43"; ++ ++ vmmcsd_fixed: fixedregulator-sd { ++ compatible = "regulator-fixed"; ++ regulator-name = "vmmcsd_fixed"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ enable-active-high; ++ }; ++ ++ aliases { ++ display0 = &lcd0; ++ display1 = &hdmi0; ++ }; ++ ++ lcd0: display@0 { ++ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; ++ video-source = <&dpi>; ++ data-lines = <24>; ++ gpios = <0 /* No Enable GPIO */ ++ &gpio0 7 GPIO_ACTIVE_LOW>; /* LCD backlight GPIO */ ++ panel-timing { ++ clock-frequency = <33000000>; ++ hactive = <800>; ++ vactive = <480>; ++ hfront-porch = <210>; ++ hback-porch = <16>; ++ hsync-len = <30>; ++ vback-porch = <10>; ++ vfront-porch = <22>; ++ vsync-len = <13>; ++ hsync-active = <0>; ++ vsync-active = <0>; ++ de-active = <1>; ++ pixelclk-active = <1>; ++ }; ++ }; ++ ++ hdmi0: connector@1 { ++ compatible = "ti,hdmi_connector"; ++ video-source = <&sii9022>; ++ }; ++}; ++ ++&am43xx_pinmux { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&dss_pinctrl>; ++ cpsw_default: cpsw_default { ++ pinctrl-single,pins = < ++ /* Slave 1 */ ++ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs */ ++ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ ++ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txen.rmii1_txen */ ++ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxdv.rmii1_rxdv */ ++ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ ++ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ ++ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ ++ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ ++ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk.rmii1_refclk */ ++ >; ++ }; ++ ++ cpsw_sleep: cpsw_sleep { ++ pinctrl-single,pins = < ++ /* Slave 1 reset value */ ++ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ >; ++ }; ++ ++ davinci_mdio_default: davinci_mdio_default { ++ pinctrl-single,pins = < ++ /* MDIO */ ++ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ ++ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ ++ >; ++ }; ++ ++ davinci_mdio_sleep: davinci_mdio_sleep { ++ pinctrl-single,pins = < ++ /* MDIO reset value */ ++ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) ++ >; ++ }; ++ ++ mmc1_pins: pinmux_mmc1_pins { ++ pinctrl-single,pins = < ++ 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ ++ >; ++ }; ++ ++ i2c0_pins: pinmux_i2c0_pins { ++ pinctrl-single,pins = < ++ 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ ++ 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ ++ >; ++ }; ++ ++ i2c2_pins: pinmux_i2c2_pins { ++ pinctrl-single,pins = < ++ 0x1c0 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c2_sda.i2c2_sda */ ++ 0x1c4 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c2_scl.i2c2_scl */ ++ >; ++ }; ++ ++ spi0_pins: pinmux_spi0_pins { ++ pinctrl-single,pins = < ++ 0x150 (PIN_INPUT | MUX_MODE0) /* spi0_clk.spi0_clk */ ++ 0x154 (PIN_OUTPUT | MUX_MODE0) /* spi0_d0.spi0_d0 */ ++ 0x158 (PIN_INPUT | MUX_MODE0) /* spi0_d1.spi0_d1 */ ++ 0x15c (PIN_OUTPUT | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ ++ >; ++ }; ++ ++ spi1_pins: pinmux_spi1_pins { ++ pinctrl-single,pins = < ++ 0x190 (PIN_INPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_clk */ ++ 0x194 (PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */ ++ 0x198 (PIN_INPUT | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */ ++ 0x19c (PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */ ++ >; ++ }; ++ ++ pixcir_ts_pins: pixcir_ts_pins { ++ pinctrl-single,pins = < ++ 0x48 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a1.gpio1_17 */ ++ >; ++ }; ++ ++ dss_pinctrl: dss_pinctrl { ++ pinctrl-single,pins = < ++ 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */ ++ 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x02C (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) ++ 0x03C (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */ ++ 0x0A0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ ++ 0x0A4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0A8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0AC (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0B0 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0B4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0B8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0BC (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0C0 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0C4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0C8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0CC (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0D0 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0D4 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0D8 (PIN_OUTPUT_PULLUP | MUX_MODE0) ++ 0x0DC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ ++ 0x0E0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ ++ 0x0E4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ ++ 0x0E8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ ++ 0x0EC (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ ++ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ ++ 0x164 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* ECAP0_IN_PWM0_OUT -> GPIO 0_7 BACKLIGHT */ ++ >; ++ }; ++}; ++ ++&gpio0 { ++ status = "okay"; ++}; ++ ++&gpio1 { ++ status = "okay"; ++}; ++ ++&gpio2 { ++ status = "okay"; ++}; ++ ++&qspi { ++ spi-max-frequency = <48000000>; ++ m25p80@0 { ++ compatible = "mx66l51235l"; ++ spi-max-frequency = <48000000>; ++ reg = <0>; ++ spi-cpol; ++ spi-cpha; ++ tx-nbits = <1>; ++ rx-nbits = <4>; ++ }; ++}; ++ ++&mac { ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&cpsw_default>; ++ pinctrl-1 = <&cpsw_sleep>; ++ status = "okay"; ++}; ++ ++&davinci_mdio { ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&davinci_mdio_default>; ++ pinctrl-1 = <&davinci_mdio_sleep>; ++ status = "okay"; ++}; ++ ++&cpsw_emac0 { ++ phy_id = <&davinci_mdio>, <16>; ++ phy-mode = "rmii"; ++}; ++ ++&cpsw_emac1 { ++ phy_id = <&davinci_mdio>, <1>; ++ phy-mode = "rmii"; ++}; ++ ++&phy_sel { ++ rmii-clock-ext; ++}; ++ ++&mmc1 { ++ status = "okay"; ++ vmmc-supply = <&vmmcsd_fixed>; ++ bus-width = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; ++}; ++ ++&i2c0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins>; ++ status = "okay"; ++ clock-frequency = <400000>; ++ ++ pixcir_ts@5c { ++ compatible = "pixcir,pixcir_tangoc"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pixcir_ts_pins>; ++ reg = <0x5c>; ++ interrupt-parent = <&gpio1>; ++ interrupts = <17 0>; ++ ++ attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; ++ ++ x-size = <1024>; ++ y-size = <600>; ++ }; ++}; ++ ++&i2c2 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins>; ++ status = "okay"; ++ ++ sii9022: sii9022@3b { ++ compatible = "sii,sii9022"; ++ reg = <0x3b>; ++ reset-gpio = <&gpio2 1 GPIO_ACTIVE_LOW>;/* 65'SelLCDorHDMI' Gpio, LOW to select HDMI */ ++ video-source = <&dpi>; ++ data-lines = <24>; ++ }; ++}; ++ ++&spi0 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins>; ++ status = "okay"; ++}; ++ ++&spi1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi1_pins>; ++ status = "okay"; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/am43xx-clocks.dtsi +@@ -0,0 +1,735 @@ ++/* ++ * Device Tree Source for AM43xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++clk_32768_ck: clk_32768_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++clk_rc32k_ck: clk_rc32k_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++virt_19200000_ck: virt_19200000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <19200000>; ++}; ++ ++virt_24000000_ck: virt_24000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <24000000>; ++}; ++ ++virt_25000000_ck: virt_25000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <25000000>; ++}; ++ ++virt_26000000_ck: virt_26000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <26000000>; ++}; ++ ++crystal_freq_sel_ck: crystal_freq_sel_ck@44e10040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ++ bit-shift = <29>; ++ reg = <0x44e10040 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>; ++ bit-shift = <22>; ++ reg = <0x44e10040 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++sys_clkin_ck: sys_clkin_ck@44e10040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>; ++ bit-shift = <31>; ++ reg = <0x44e10040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++tclkin_ck: tclkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <26000000>; ++}; ++ ++dpll_core_ck: dpll_core_ck@44df2d20 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-core-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44df2d20 0x4>, <0x44df2d24 0x4>, <0x44df2d2c 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_core_x2_ck: dpll_core_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_core_ck>; ++}; ++ ++dpll_core_m4_ck: dpll_core_m4_ck@44df2d38 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2d38 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_m5_ck: dpll_core_m5_ck@44df2d3c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2d3c 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_m6_ck: dpll_core_m6_ck@44df2d40 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2d40 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_mpu_ck: dpll_mpu_ck@44df2d60 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44df2d60 0x4>, <0x44df2d64 0x4>, <0x44df2d6c 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_mpu_m2_ck: dpll_mpu_m2_ck@44df2d70 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_mpu_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2d70 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_ddr_ck: dpll_ddr_ck@44df2da0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44df2da0 0x4>, <0x44df2da4 0x4>, <0x44df2dac 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_ddr_m2_ck: dpll_ddr_m2_ck@44df2db0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_ddr_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2db0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_disp_ck: dpll_disp_ck@44df2e20 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44df2e20 0x4>, <0x44df2e24 0x4>, <0x44df2e2c 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_disp_m2_ck: dpll_disp_m2_ck@44df2e30 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_disp_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2e30 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_ck: dpll_per_ck@44df2de0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-j-type-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44df2de0 0x4>, <0x44df2de4 0x4>, <0x44df2dec 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_per_m2_ck: dpll_per_m2_ck@44df2df0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2df0 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++dpll_per_m2_div4_ck: dpll_per_m2_div4_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++adc_tsc_fck: adc_tsc_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++clk_24mhz: clk_24mhz { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++clkdiv32k_ck: clkdiv32k_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&clk_24mhz>; ++ clock-mult = <1>; ++ clock-div = <732>; ++}; ++ ++clkdiv32k_ick: clkdiv32k_ick@44df2a38 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ck>; ++ bit-shift = <8>; ++ reg = <0x44df2a38 0x4>; ++}; ++ ++dcan0_fck: dcan0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dcan1_fck: dcan1_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sysclk_div: sysclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++pruss_ocp_gclk: pruss_ocp_gclk@44df4248 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sysclk_div>, <&dpll_disp_m2_ck>; ++ reg = <0x44df4248 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcasp0_fck: mcasp0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mcasp1_fck: mcasp1_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++smartreflex0_fck: smartreflex0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++smartreflex1_fck: smartreflex1_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sha0_fck: sha0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++rng_fck: rng_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++aes0_fck: aes0_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++clk_32k_tpm_ck: clk_32k_tpm_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++timer1_fck: timer1_fck@44df4200 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>; ++ reg = <0x44df4200 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++timer2_fck: timer2_fck@44df4204 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df4204 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer3_fck: timer3_fck@44df4208 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df4208 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer4_fck: timer4_fck@44df420c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df420c 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer5_fck: timer5_fck@44df4210 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df4210 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer6_fck: timer6_fck@44df4214 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df4214 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer7_fck: timer7_fck@44df4218 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df4218 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++wdt1_fck: wdt1_fck@44df422c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df422c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++l3_gclk: l3_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_core_m4_div2_ck: dpll_core_m4_div2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sysclk_div>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++l4hs_gclk: l4hs_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l3s_gclk: l3s_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_div2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l4ls_gclk: l4ls_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4_div2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++cpsw_125mhz_gclk: cpsw_125mhz_gclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m5_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++cpsw_cpts_rft_clk: cpsw_cpts_rft_clk@44df4238 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>; ++ reg = <0x44df4238 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++clk_32k_mosc_ck: clk_32k_mosc_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck@44df4240 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>; ++ reg = <0x44df4240 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++gpio0_dbclk: gpio0_dbclk@44df2b68 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpio0_dbclk_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x44df2b68 0x4>; ++}; ++ ++gpio1_dbclk: gpio1_dbclk@44df8c78 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <8>; ++ reg = <0x44df8c78 0x4>; ++}; ++ ++gpio2_dbclk: gpio2_dbclk@44df8c80 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <8>; ++ reg = <0x44df8c80 0x4>; ++}; ++ ++gpio3_dbclk: gpio3_dbclk@44df8c88 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <8>; ++ reg = <0x44df8c88 0x4>; ++}; ++ ++gpio4_dbclk: gpio4_dbclk@44df8c90 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <8>; ++ reg = <0x44df8c90 0x4>; ++}; ++ ++gpio5_dbclk: gpio5_dbclk@44df8c98 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkdiv32k_ick>; ++ bit-shift = <8>; ++ reg = <0x44df8c98 0x4>; ++}; ++ ++mmc_clk: mmc_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++gfx_fclk_clksel_ck: gfx_fclk_clksel_ck@44df423c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sysclk_div>, <&dpll_per_m2_ck>; ++ bit-shift = <1>; ++ reg = <0x44df423c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gfx_fck_div_ck: gfx_fck_div_ck@44df423c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&gfx_fclk_clksel_ck>; ++ reg = <0x44df423c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++disp_clk: disp_clk@44df4244 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>; ++ reg = <0x44df4244 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++dpll_extdev_ck: dpll_extdev_ck@44df2e60 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; ++ reg = <0x44df2e60 0x4>, <0x44df2e64 0x4>, <0x44df2e6c 0x4>; ++ reg-names = "control", "idlest", "mult-div1"; ++}; ++ ++dpll_extdev_m2_ck: dpll_extdev_m2_ck@44df2e70 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_extdev_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2e70 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++mux_synctimer32k_ck: mux_synctimer32k_ck@44df4230 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>; ++ reg = <0x44df4230 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++synctimer_32kclk: synctimer_32kclk@44df2a30 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&mux_synctimer32k_ck>; ++ bit-shift = <8>; ++ reg = <0x44df2a30 0x4>; ++}; ++ ++timer8_fck: timer8_fck@44df421c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; ++ reg = <0x44df421c 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer9_fck: timer9_fck@44df4220 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; ++ reg = <0x44df4220 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer10_fck: timer10_fck@44df4224 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; ++ reg = <0x44df4224 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++timer11_fck: timer11_fck@44df4228 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>; ++ reg = <0x44df4228 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++cpsw_50m_clkdiv: cpsw_50m_clkdiv { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m5_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++cpsw_5m_clkdiv: cpsw_5m_clkdiv { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&cpsw_50m_clkdiv>; ++ clock-mult = <1>; ++ clock-div = <10>; ++}; ++ ++dpll_ddr_x2_ck: dpll_ddr_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_ddr_ck>; ++}; ++ ++dpll_ddr_m4_ck: dpll_ddr_m4_ck@44df2db8 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_ddr_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x44df2db8 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_clkdcoldo: dpll_per_clkdcoldo { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dll_aging_clk_div: dll_aging_clk_div@44df4250 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin_ck>; ++ reg = <0x44df4250 0x4>; ++ table = < 8 0 >, < 16 1 >, < 32 2 >; ++ bit-mask = <0x3>; ++}; ++ ++div_core_25m_ck: div_core_25m_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sysclk_div>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++func_12m_clk: func_12m_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <16>; ++}; ++ ++vtp_clk_div: vtp_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++usbphy_32khz_clkmux: usbphy_32khz_clkmux@44df4260 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>; ++ reg = <0x44df4260 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m@44df8a60 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_clkdcoldo>; ++ bit-shift = <8>; ++ reg = <0x44df8a60 0x4>; ++}; ++ ++usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@44df8a68 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_clkdcoldo>; ++ bit-shift = <8>; ++ reg = <0x44df8a68 0x4>; ++}; ++ ++usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clocks = <&clk_32768_ck>; ++}; ++ ++usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clocks = <&clk_32768_ck>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/dra7.dtsi +@@ -0,0 +1,1278 @@ ++/* ++ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * Based on "omap4.dtsi" ++ */ ++ ++#include ++ ++#include "skeleton.dtsi" ++ ++/ { ++ compatible = "ti,dra7xx"; ++ interrupt-parent = <&gic>; ++ ++ aliases { ++ i2c0 = &i2c1; ++ i2c1 = &i2c2; ++ i2c2 = &i2c3; ++ i2c3 = &i2c4; ++ i2c4 = &i2c5; ++ serial0 = &uart1; ++ serial1 = &uart2; ++ serial2 = &uart3; ++ serial3 = &uart4; ++ serial4 = &uart5; ++ serial5 = &uart6; ++ ethernet0 = &cpsw_emac0; ++ ethernet1 = &cpsw_emac1; ++ }; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a15"; ++ reg = <0>; ++ ++ operating-points = < ++ /* kHz uV */ ++ 1000000 1090000 ++ 1176000 1210000 ++ >; ++ ++ clocks = <&dpll_mpu_ck>; ++ clock-names = "cpu"; ++ ++ clock-latency = <300000>; /* From omap-cpufreq driver */ ++ }; ++ cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a15"; ++ reg = <1>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv7-timer"; ++ /* PPI secure/nonsecure IRQ */ ++ interrupts = , ++ , ++ , ++ ; ++ clock-frequency = <6144000>; ++ }; ++ ++ gic: interrupt-controller@48211000 { ++ compatible = "arm,cortex-a15-gic"; ++ interrupt-controller; ++ #interrupt-cells = <3>; ++ reg = <0x48211000 0x1000>, ++ <0x48212000 0x1000>, ++ <0x48214000 0x2000>, ++ <0x48216000 0x2000>; ++ }; ++ ++ /* ++ * The soc node represents the soc top level view. It is uses for IPs ++ * that are not memory mapped in the MPU view or for the MPU itself. ++ */ ++ soc { ++ compatible = "ti,omap-infra"; ++ mpu { ++ compatible = "ti,omap5-mpu"; ++ ti,hwmods = "mpu"; ++ }; ++ }; ++ ++ /* ++ * XXX: Use a flat representation of the SOC interconnect. ++ * The real OMAP interconnect network is quite complex. ++ * Since that will not bring real advantage to represent that in DT for ++ * the moment, just use a fake OCP bus entry to represent the whole bus ++ * hierarchy. ++ */ ++ ocp { ++ compatible = "ti,omap4-l3-noc", "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "l3_main_1", "l3_main_2"; ++ ++ crossbar_mpu: mpuirq@4a002a48 { ++ compatible = "crossbar"; ++ crossbar-name = "mpu-irq"; ++ reg = <0x4a002a48 0x0130>; ++ reg-width = <16>; ++ crossbar-lines = "mpu-irq", "rtc-ss-alarm", <0x9f 0xd9 0x12e>, ++ "mpu-irq", "mcasp3-arevt", <0x9e 0x96 0x12c>, ++ "mpu-irq", "mcasp3-axevt", <0x9d 0x97 0x12a>, ++ "mpu-irq", "mailbox5", <0x88 0xfb 0x100>, ++ "mpu-irq", "mailbox6", <0x8d 0xff 0x10a>, ++ "mpu-irq", "qspi", <0x7c 0x157 0x0ec>, ++ "mpu-irq", "vpe", <0x9c 0x162 0x128>, ++ "mpu-irq", "cpsw-rx-thresh", <0x32 0x14e 0x58>, ++ "mpu-irq", "cpsw-rx", <0x33 0x14f 0x5a>, ++ "mpu-irq", "cpsw-tx", <0x34 0x150 0x5c>, ++ "mpu-irq", "cpsw-misc", <0x35 0x151 0x5e>; ++ }; ++ ++ crossbar_dma: dmareq@4a002b78 { ++ compatible = "crossbar"; ++ crossbar-name = "dma-req"; ++ reg = <0x4a002b78 0x0100>; ++ reg-width = <16>; ++ crossbar-lines = "dma-req", "mcasp3-rx", <0x7e 0x84 0xfc>, ++ "dma-req", "mcasp3-tx", <0x7d 0x85 0xfa>; ++ }; ++ ++ prcm: prcm@4ae06000 { ++ compatible = "ti,dra7-prcm"; ++ reg = <0x4ae06000 0x1f00>; ++ #reset-cells = <1>; ++ }; ++ ++ counter32k: counter@4ae04000 { ++ compatible = "ti,omap-counter32k"; ++ reg = <0x4ae04000 0x40>; ++ ti,hwmods = "counter_32k"; ++ clocks = <&wkupaon_iclk_mux>; ++ clock-names = "fck"; ++ }; ++ ++ avs_mpu: regulator-avs@0x4A003B18 { ++ compatible = "ti,avsclass0"; ++ reg = <0x4A003B18 20>; ++ efuse-settings = <1090000 8 ++ 1210000 12 ++ 1280000 16>; ++ }; ++ ++ avs_core: regulator-avs@0x4A0025EC { ++ compatible = "ti,avsclass0"; ++ reg = <0x4A0025EC 20>; ++ efuse-settings = <1030000 8>; ++ }; ++ ++ avs_gpu: regulator-avs@0x4A003B00 { ++ compatible = "ti,avsclass0"; ++ reg = <0x4A003B00 20>; ++ efuse-settings = <1090000 8 ++ 1210000 12 ++ 1280000 16>; ++ }; ++ ++ avs_dspeve: regulator-avs@0x4A0025D8 { ++ compatible = "ti,avsclass0"; ++ reg = <0x4A0025D8 20>; ++ efuse-settings = <1055000 8 ++ 1150000 12 ++ 1250000 16>; ++ }; ++ ++ avs_iva: regulator-avs@0x4A0025C4 { ++ compatible = "ti,avsclass0"; ++ reg = <0x4A0025C4 20>; ++ efuse-settings = <1055000 8 ++ 1150000 12 ++ 1250000 16>; ++ }; ++ ++ dra7_pmx_core: pinmux@4a003400 { ++ compatible = "pinctrl-single"; ++ reg = <0x4a003400 0x0464>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-single,register-width = <32>; ++ pinctrl-single,function-mask = <0x3fffffff>; ++ }; ++ ++ sdma: dma-controller@4a056000 { ++ compatible = "ti,omap4430-sdma"; ++ reg = <0x4a056000 0x1000>; ++ interrupts = <0 12 0x4>, ++ <0 13 0x4>, ++ <0 14 0x4>, ++ <0 15 0x4>; ++ #dma-cells = <1>; ++ #dma-channels = <32>; ++ #dma-requests = <127>; ++ clocks = <&l3_iclk_div>; ++ clock-names = "fck"; ++ }; ++ ++ gpio1: gpio@4ae10000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x4ae10000 0x200>; ++ interrupts = <0 29 0x4>; ++ ti,hwmods = "gpio1"; ++ clocks = <&wkupaon_iclk_mux>, <&gpio1_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ gpio2: gpio@48055000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x48055000 0x200>; ++ interrupts = <0 30 0x4>; ++ ti,hwmods = "gpio2"; ++ clocks = <&l3_iclk_div>, <&gpio2_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ gpio3: gpio@48057000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x48057000 0x200>; ++ interrupts = <0 31 0x4>; ++ ti,hwmods = "gpio3"; ++ clocks = <&l3_iclk_div>, <&gpio3_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ gpio4: gpio@48059000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x48059000 0x200>; ++ interrupts = <0 32 0x4>; ++ ti,hwmods = "gpio4"; ++ clocks = <&l3_iclk_div>, <&gpio4_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ gpio5: gpio@4805b000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x4805b000 0x200>; ++ interrupts = <0 33 0x4>; ++ ti,hwmods = "gpio5"; ++ clocks = <&l3_iclk_div>, <&gpio5_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ gpio6: gpio@4805d000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x4805d000 0x200>; ++ interrupts = <0 34 0x4>; ++ ti,hwmods = "gpio6"; ++ clocks = <&l3_iclk_div>, <&gpio6_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ gpio7: gpio@48051000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x48051000 0x200>; ++ interrupts = <0 35 0x4>; ++ ti,hwmods = "gpio7"; ++ clocks = <&l3_iclk_div>, <&gpio7_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ gpio8: gpio@48053000 { ++ compatible = "ti,omap4-gpio"; ++ reg = <0x48053000 0x200>; ++ interrupts = <0 121 0x4>; ++ ti,hwmods = "gpio8"; ++ clocks = <&l3_iclk_div>, <&gpio8_dbclk>; ++ clock-names = "fck", "dbclk"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ ++ uart1: serial@4806a000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x4806a000 0x100>; ++ interrupts = <0 72 0x4>; ++ ti,hwmods = "uart1"; ++ clocks = <&uart1_gfclk_mux>; ++ clock-names = "fck"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart2: serial@4806c000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x4806c000 0x100>; ++ interrupts = <0 73 0x4>; ++ ti,hwmods = "uart2"; ++ clocks = <&uart2_gfclk_mux>; ++ clock-names = "fck"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart3: serial@48020000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x48020000 0x100>; ++ interrupts = <0 74 0x4>; ++ ti,hwmods = "uart3"; ++ clocks = <&uart3_gfclk_mux>; ++ clock-names = "fck"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart4: serial@4806e000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x4806e000 0x100>; ++ interrupts = <0 70 0x4>; ++ ti,hwmods = "uart4"; ++ clocks = <&uart4_gfclk_mux>; ++ clock-names = "fck"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart5: serial@48066000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x48066000 0x100>; ++ interrupts = <0 105 0x4>; ++ ti,hwmods = "uart5"; ++ clocks = <&uart5_gfclk_mux>; ++ clock-names = "fck"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart6: serial@48068000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x48068000 0x100>; ++ interrupts = <0 106 0x4>; ++ ti,hwmods = "uart6"; ++ clocks = <&uart6_gfclk_mux>; ++ clock-names = "fck"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart7: serial@48420000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x48420000 0x100>; ++ ti,hwmods = "uart7"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart8: serial@48422000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x48422000 0x100>; ++ ti,hwmods = "uart8"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart9: serial@48424000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x48424000 0x100>; ++ ti,hwmods = "uart9"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ uart10: serial@4ae2b000 { ++ compatible = "ti,omap4-uart"; ++ reg = <0x4ae2b000 0x100>; ++ ti,hwmods = "uart10"; ++ clock-frequency = <48000000>; ++ status = "disabled"; ++ }; ++ ++ mailbox1: mailbox@4a0f4000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x4a0f4000 0x200>; ++ interrupts = <0 26 0x4>; ++ ti,hwmods = "mailbox1"; ++ ti,mbox-num-users = <3>; ++ ti,mbox-num-fifos = <8>; ++ #ti,mbox-data-cells = <4>; ++ ti,mbox-names = "mbox1-1", "mbox1-2"; ++ ti,mbox-data = <0 1 0 0>, <3 2 0 0>; ++ }; ++ ++ mailbox2: mailbox@4883a000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x4883a000 0x200>; ++ ti,hwmods = "mailbox2"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox3: mailbox@4883c000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x4883c000 0x200>; ++ ti,hwmods = "mailbox3"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox4: mailbox@4883e000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x4883e000 0x200>; ++ ti,hwmods = "mailbox4"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox5: mailbox@48840000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48840000 0x200>; ++ interrupts = <0 136 0x4>; ++ ti,hwmods = "mailbox5"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ ti,mbox-names = "mbox-ipu1", "mbox-dsp1"; ++ ti,mbox-data = <6 4 0 2>, <5 1 0 2>; ++ }; ++ ++ mailbox6: mailbox@48842000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48842000 0x200>; ++ interrupts = <0 141 0x4>; ++ ti,hwmods = "mailbox6"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ ti,mbox-names = "mbox-ipu2", "mbox-dsp2"; ++ ti,mbox-data = <6 4 0 2>, <5 1 0 2>; ++ }; ++ ++ mailbox7: mailbox@48844000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48844000 0x200>; ++ ti,hwmods = "mailbox7"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox8: mailbox@48846000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48846000 0x200>; ++ ti,hwmods = "mailbox8"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox9: mailbox@4885e000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x4885e000 0x200>; ++ ti,hwmods = "mailbox9"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox10: mailbox@48860000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48860000 0x200>; ++ ti,hwmods = "mailbox10"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox11: mailbox@48862000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48862000 0x200>; ++ ti,hwmods = "mailbox11"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox12: mailbox@48864000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48864000 0x200>; ++ ti,hwmods = "mailbox12"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ mailbox13: mailbox@48802000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x48802000 0x200>; ++ ti,hwmods = "mailbox13"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <12>; ++ #ti,mbox-data-cells = <4>; ++ status = "disabled"; ++ }; ++ ++ timer1: timer@4ae18000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x4ae18000 0x80>; ++ interrupts = <0 37 0x4>; ++ ti,hwmods = "timer1"; ++ clocks = <&timer1_gfclk_mux>; ++ clock-names = "fck"; ++ ti,timer-alwon; ++ }; ++ ++ timer2: timer@48032000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48032000 0x80>; ++ interrupts = <0 38 0x4>; ++ ti,hwmods = "timer2"; ++ clocks = <&timer2_gfclk_mux>; ++ clock-names = "fck"; ++ }; ++ ++ timer3: timer@48034000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48034000 0x80>; ++ interrupts = <0 39 0x4>; ++ ti,hwmods = "timer3"; ++ clocks = <&timer3_gfclk_mux>; ++ clock-names = "fck"; ++ }; ++ ++ timer4: timer@48036000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48036000 0x80>; ++ interrupts = <0 40 0x4>; ++ ti,hwmods = "timer4"; ++ clocks = <&timer4_gfclk_mux>; ++ clock-names = "fck"; ++ }; ++ ++ timer5: timer@48820000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48820000 0x80>; ++ interrupts = <0 41 0x4>; ++ ti,hwmods = "timer5"; ++ clocks = <&timer5_gfclk_mux>; ++ clock-names = "fck"; ++ ti,timer-dsp; ++ }; ++ ++ timer6: timer@48822000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48822000 0x80>; ++ interrupts = <0 42 0x4>; ++ ti,hwmods = "timer6"; ++ clocks = <&timer6_gfclk_mux>; ++ clock-names = "fck"; ++ ti,timer-dsp; ++ ti,timer-pwm; ++ }; ++ ++ timer7: timer@48824000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48824000 0x80>; ++ interrupts = <0 43 0x4>; ++ ti,hwmods = "timer7"; ++ clocks = <&timer7_gfclk_mux>; ++ clock-names = "fck"; ++ ti,timer-dsp; ++ }; ++ ++ timer8: timer@48826000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48826000 0x80>; ++ interrupts = <0 44 0x4>; ++ ti,hwmods = "timer8"; ++ clocks = <&timer8_gfclk_mux>; ++ clock-names = "fck"; ++ ti,timer-dsp; ++ ti,timer-pwm; ++ }; ++ ++ timer9: timer@4803e000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x4803e000 0x80>; ++ interrupts = <0 45 0x4>; ++ ti,hwmods = "timer9"; ++ clocks = <&timer9_gfclk_mux>; ++ clock-names = "fck"; ++ }; ++ ++ timer10: timer@48086000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48086000 0x80>; ++ interrupts = <0 46 0x4>; ++ ti,hwmods = "timer10"; ++ clocks = <&timer10_gfclk_mux>; ++ clock-names = "fck"; ++ }; ++ ++ timer11: timer@48088000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48088000 0x80>; ++ interrupts = <0 47 0x4>; ++ ti,hwmods = "timer11"; ++ clocks = <&timer11_gfclk_mux>; ++ clock-names = "fck"; ++ ti,timer-pwm; ++ }; ++ ++ timer13: timer@48828000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x48828000 0x80>; ++ ti,hwmods = "timer13"; ++ status = "disabled"; ++ }; ++ ++ timer14: timer@4882a000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x4882a000 0x80>; ++ ti,hwmods = "timer14"; ++ status = "disabled"; ++ }; ++ ++ timer15: timer@4882c000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x4882c000 0x80>; ++ ti,hwmods = "timer15"; ++ status = "disabled"; ++ }; ++ ++ timer16: timer@4882e000 { ++ compatible = "ti,omap5430-timer"; ++ reg = <0x4882e000 0x80>; ++ ti,hwmods = "timer16"; ++ status = "disabled"; ++ }; ++ ++ wdt2: wdt@4ae14000 { ++ compatible = "ti,omap4-wdt"; ++ reg = <0x4ae14000 0x80>; ++ interrupts = <0 80 0x4>; ++ ti,hwmods = "wd_timer2"; ++ clocks = <&sys_32k_ck>; ++ clock-names = "fck"; ++ }; ++ ++ i2c1: i2c@48070000 { ++ compatible = "ti,omap4-i2c"; ++ reg = <0x48070000 0x100>; ++ interrupts = <0 56 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "i2c1"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ i2c2: i2c@48072000 { ++ compatible = "ti,omap4-i2c"; ++ reg = <0x48072000 0x100>; ++ interrupts = <0 57 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "i2c2"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ i2c3: i2c@48060000 { ++ compatible = "ti,omap4-i2c"; ++ reg = <0x48060000 0x100>; ++ interrupts = <0 61 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "i2c3"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ i2c4: i2c@4807a000 { ++ compatible = "ti,omap4-i2c"; ++ reg = <0x4807a000 0x100>; ++ interrupts = <0 62 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "i2c4"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ i2c5: i2c@4807c000 { ++ compatible = "ti,omap4-i2c"; ++ reg = <0x4807c000 0x100>; ++ interrupts = <0 60 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "i2c5"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; ++ }; ++ ++ mmc1: mmc@4809c000 { ++ compatible = "ti,omap4-hsmmc"; ++ reg = <0x4809c000 0x400>; ++ interrupts = <0 83 0x4>; ++ ti,hwmods = "mmc1"; ++ clocks = <&mmc1_fclk_div>, <&mmc1_clk32k>; ++ clock-names = "fck", "clk32k"; ++ ti,dual-volt; ++ ti,needs-special-reset; ++ dmas = <&sdma 61>, <&sdma 62>; ++ dma-names = "tx", "rx"; ++ status = "disabled"; ++ }; ++ ++ mmc2: mmc@480b4000 { ++ compatible = "ti,omap4-hsmmc"; ++ reg = <0x480b4000 0x400>; ++ interrupts = <0 86 0x4>; ++ ti,hwmods = "mmc2"; ++ clocks = <&mmc2_fclk_div>, <&mmc2_clk32k>; ++ clock-names = "fck", "clk32k"; ++ ti,needs-special-reset; ++ dmas = <&sdma 47>, <&sdma 48>; ++ dma-names = "tx", "rx"; ++ status = "disabled"; ++ }; ++ ++ mmc3: mmc@480ad000 { ++ compatible = "ti,omap4-hsmmc"; ++ reg = <0x480ad000 0x400>; ++ interrupts = <0 94 0x4>; ++ ti,hwmods = "mmc3"; ++ clocks = <&mmc3_gfclk_div>, <&mmc3_clk32k>; ++ clock-names = "fck", "clk32k"; ++ ti,needs-special-reset; ++ dmas = <&sdma 77>, <&sdma 78>; ++ dma-names = "tx", "rx"; ++ status = "disabled"; ++ }; ++ ++ mmc4: mmc@480d1000 { ++ compatible = "ti,omap4-hsmmc"; ++ reg = <0x480d1000 0x400>; ++ interrupts = <0 96 0x4>; ++ ti,hwmods = "mmc4"; ++ clocks = <&mmc4_gfclk_div>, <&mmc4_clk32k>; ++ clock-names = "fck", "clk32k"; ++ ti,needs-special-reset; ++ dmas = <&sdma 57>, <&sdma 58>; ++ dma-names = "tx", "rx"; ++ status = "disabled"; ++ }; ++ ++ qspi: qspi@4b300000 { ++ compatible = "ti,dra7xxx-qspi"; ++ reg = <0x4b300000 0x100>, <0x4a002558 0x4>, ++ <0x5c000000 0x3ffffff>; ++ reg-names = "qspi_base", ++ "qspi_ctrlmod", ++ "qspi_mmap"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "qspi"; ++ ti,spi-num-cs = <4>; ++ interrupts = <0 124 0x4>; ++ mmap_read; ++ }; ++ ++ omap_control_sata: control-phy@4a002374 { ++ compatible = "ti,control-phy-pipe3"; ++ reg = <0x4a002374 0x4>; ++ reg-names = "power"; ++ clocks = <&sys_clkin1>; ++ clock-names = "sysclk"; ++ }; ++ ++ ocp2scp@4a090000 { ++ compatible = "ti,omap-ocp2scp"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "ocp2scp3"; ++ reg = <0x4a090000 0x400>; /* ocp2scp3 */ ++ sata_phy: sata-phy@4A096000 { ++ compatible = "ti,phy-pipe3-sata"; ++ reg = <0x4A096000 0x80>, /* phy_rx */ ++ <0x4A096400 0x64>, /* phy_tx */ ++ <0x4A096800 0x40>; /* pll_ctrl */ ++ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ++ ctrl-module = <&omap_control_sata>; ++ clocks = <&sata_ref_clk>; ++ clock-names = "refclk"; ++ #phy-cells = <0>; ++ }; ++ }; ++ ++ sata@4a141100 { ++ compatible = "ti,sata"; ++ ti,hwmods = "sata"; ++ reg = <0x4a141100 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ sata@4a140000 { ++ compatible = "snps,dwc-ahci"; ++ reg = <0x4a140000 0x1100>; ++ interrupts = <0 54 0x4>; ++ phys = <&sata_phy>; ++ phy-names = "sata-phy"; ++ }; ++ }; ++ ++ ++ mcspi1: spi@48098000 { ++ compatible = "ti,omap4-mcspi"; ++ reg = <0x48098000 0x200>; ++ interrupts = <0 65 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "mcspi1"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; ++ ti,spi-num-cs = <4>; ++ dmas = <&sdma 35>, ++ <&sdma 36>, ++ <&sdma 37>, ++ <&sdma 38>, ++ <&sdma 39>, ++ <&sdma 40>, ++ <&sdma 41>, ++ <&sdma 42>; ++ dma-names = "tx0", "rx0", "tx1", "rx1", ++ "tx2", "rx2", "tx3", "rx3"; ++ status = "disabled"; ++ }; ++ ++ mcspi2: spi@4809a000 { ++ compatible = "ti,omap4-mcspi"; ++ reg = <0x4809a000 0x200>; ++ interrupts = <0 66 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "mcspi2"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; ++ ti,spi-num-cs = <2>; ++ dmas = <&sdma 43>, ++ <&sdma 44>, ++ <&sdma 45>, ++ <&sdma 46>; ++ dma-names = "tx0", "rx0", "tx1", "rx1"; ++ status = "disabled"; ++ }; ++ ++ mcspi3: spi@480b8000 { ++ compatible = "ti,omap4-mcspi"; ++ reg = <0x480b8000 0x200>; ++ interrupts = <0 91 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "mcspi3"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; ++ ti,spi-num-cs = <2>; ++ dmas = <&sdma 15>, <&sdma 16>; ++ dma-names = "tx0", "rx0"; ++ status = "disabled"; ++ }; ++ ++ mcspi4: spi@480ba000 { ++ compatible = "ti,omap4-mcspi"; ++ reg = <0x480ba000 0x200>; ++ interrupts = <0 48 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "mcspi4"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; ++ ti,spi-num-cs = <1>; ++ dmas = <&sdma 70>, <&sdma 71>; ++ dma-names = "tx0", "rx0"; ++ status = "disabled"; ++ }; ++ ++ rtcss@48838000 { ++ compatible = "ti,da830-rtc"; ++ reg = <0x48838000 0x100>; ++ interrupts = <0 159 0x4>, ++ <0 159 0x4>; ++ ti,hwmods = "rtcss"; ++ clocks = <&sys_32k_ck>; ++ clock-names = "fck"; ++ }; ++ ++ omap_control_usb2phy1: control-phy@4a002300 { ++ compatible = "ti,control-phy-usb2"; ++ reg = <0x4a002300 0x4>; ++ reg-names = "power"; ++ }; ++ ++ omap_control_usb3phy1: control-phy@4a002370 { ++ compatible = "ti,control-phy-pipe3"; ++ reg = <0x4a002370 0x4>; ++ reg-names = "power"; ++ }; ++ ++ omap_control_usb2phy2: control-phy@0x4a002e74 { ++ compatible = "ti,control-phy-dra7usb2"; ++ reg = <0x4a002e74 0x4>; ++ reg-names = "power"; ++ }; ++ ++ ocp2scp@4a080000 { ++ compatible = "ti,omap-ocp2scp"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "ocp2scp1"; ++ reg = <0x4a080000 0x400>; /* ocp2scp1 */ ++ ++ usb2_phy1: usb2phy1@4a084000 { ++ compatible = "ti,omap-usb2"; ++ reg = <0x4a084000 0x400>; ++ ctrl-module = <&omap_control_usb2phy1>; ++ clocks = <&usb_phy1_always_on_clk32k>, ++ <&usb_otg_ss1_refclk960m>; ++ clock-names = "wkupclk", ++ "refclk"; ++ #phy-cells = <0>; ++ }; ++ ++ usb2_phy2: usb2phy2@4a085000 { ++ compatible = "ti,omap-usb2"; ++ reg = <0x4a085000 0x400>; ++ ctrl-module = <&omap_control_usb2phy2>; ++ clocks = <&usb_phy2_always_on_clk32k>, ++ <&usb_otg_ss2_refclk960m>; ++ clock-names = "wkupclk", ++ "refclk"; ++ #phy-cells = <0>; ++ }; ++ ++ usb3_phy1: usb3phy@4a084400 { ++ compatible = "ti,phy-pipe3-usb3"; ++ reg = <0x4a084400 0x80>, ++ <0x4a084800 0x64>, ++ <0x4a084c00 0x40>; ++ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ++ ctrl-module = <&omap_control_usb3phy1>; ++ clocks = <&usb_phy1_always_on_clk32k>, ++ <&usb_otg_ss1_refclk960m>, ++ <&dpll_core_h13x2_ck>; ++ clock-names = "wkupclk", ++ "refclk", ++ "refclk2"; ++ #phy-cells = <0>; ++ }; ++ }; ++ ++ dwc3_1: omap_dwc3_1@48880000 { ++ compatible = "ti,dwc3"; ++ ti,hwmods = "usb_otg_ss1"; ++ reg = <0x48880000 0x10000>; ++ interrupts = <0 77 4>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ utmi-mode = <2>; ++ ranges; ++ usb1: usb@48890000 { ++ compatible = "synopsys,dwc3"; ++ reg = <0x48890000 0x17000>; ++ interrupts = <0 76 4>; ++ phys = <&usb2_phy1>, <&usb3_phy1>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ tx-fifo-resize; ++ maximum-speed = "super-speed"; ++ dr_mode = "otg"; ++ }; ++ }; ++ ++ dwc3_2: omap_dwc3_2@488c0000 { ++ compatible = "ti,dwc3"; ++ ti,hwmods = "usb_otg_ss2"; ++ reg = <0x488c0000 0x10000>; ++ interrupts = <0 92 4>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ utmi-mode = <2>; ++ ranges; ++ usb2: usb@488d0000 { ++ compatible = "synopsys,dwc3"; ++ reg = <0x488d0000 0x17000>; ++ interrupts = <0 78 4>; ++ phys = <&usb2_phy2>; ++ phy-names = "usb2-phy"; ++ tx-fifo-resize; ++ maximum-speed = "high-speed"; ++ dr_mode = "otg"; ++ }; ++ }; ++ ++ /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */ ++ dwc3_3: omap_dwc3_3@48900000 { ++ compatible = "ti,dwc3"; ++ ti,hwmods = "usb_otg_ss3"; ++ reg = <0x48900000 0x10000>; ++ /* interrupts = <0 TBD 4>; */ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ utmi-mode = <2>; ++ ranges; ++ status = "disabled"; ++ usb3: usb@48910000 { ++ compatible = "synopsys,dwc3"; ++ reg = <0x48910000 0x17000>; ++ /* interrupts = <0 93 4>; */ ++ tx-fifo-resize; ++ maximum-speed = "high-speed"; ++ dr_mode = "otg"; ++ }; ++ }; ++ ++ dwc3_4: omap_dwc3_4@48940000 { ++ compatible = "ti,dwc3"; ++ ti,hwmods = "usb_otg_ss4"; ++ reg = <0x48940000 0x10000>; ++ /* interrupts = <0 TBD 4>; */ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ utmi-mode = <2>; ++ ranges; ++ status = "disabled"; ++ usb4: usb@48950000 { ++ compatible = "synopsys,dwc3"; ++ reg = <0x48950000 0x17000>; ++ /* interrupts = <0 TBD 4>; */ ++ tx-fifo-resize; ++ maximum-speed = "high-speed"; ++ dr_mode = "otg"; ++ }; ++ }; ++ ++ dmm: dmm@4e000000 { ++ compatible = "ti,omap5-dmm"; ++ reg = <0x4e000000 0x800>; ++ interrupts = <0 113 0x4>; ++ ti,hwmods = "dmm"; ++ }; ++ ++ dss: dss@58000000 { ++ compatible = "ti,omap4-dss", "simple-bus"; ++ reg = <0x58000000 0x80>, ++ <0x58004000 0x340>, ++ <0x58009000 0x340>; ++ ti,hwmods = "dss_core"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ dispc@58001000 { ++ compatible = "ti,omap4-dispc"; ++ reg = <0x58001000 0x1000>; ++ interrupts = <0 25 0x4>; ++ ti,hwmods = "dss_dispc"; ++ }; ++ ++ dpi1: encoder@0 { ++ compatible = "ti,dra7xx-dpi"; ++ id = <0>; ++ channel = <0>; ++ }; ++ ++ dpi2: encoder@1 { ++ compatible = "ti,dra7xx-dpi"; ++ id = <1>; ++ }; ++ ++ dpi3: encoder@2 { ++ compatible = "ti,dra7xx-dpi"; ++ id = <2>; ++ }; ++ ++ hdmi: encoder@58040000 { ++ compatible = "ti,omap5-hdmi"; ++ reg = <0x58040000 0x100>, ++ <0x58040200 0x40>, ++ <0x58040300 0x40>, ++ <0x58060000 0x19000>; ++ reg-names = "hdmi_wp", "hdmi_pllctrl", ++ "hdmi_txphy", "hdmi_core"; ++ interrupts = <0 101 0x4>; ++ ti,hwmods = "dss_hdmi"; ++ }; ++ }; ++ ++ vpe { ++ compatible = "ti,vpe"; ++ ti,hwmods = "vpe"; ++ reg = <0x489d0000 0x120>, ++ <0x489d0300 0x20>, ++ <0x489d0400 0x20>, ++ <0x489d0500 0x20>, ++ <0x489d0600 0x3c>, ++ <0x489d0700 0x80>, ++ <0x489d5700 0x18>, ++ <0x489dd000 0x400>; ++ reg-names = "vpe_top", ++ "vpe_chr_us0", ++ "vpe_chr_us1", ++ "vpe_chr_us2", ++ "vpe_dei", ++ "vpe_sc", ++ "vpe_csc", ++ "vpdma"; ++ interrupts = <0 0x9c 0x4>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ ++ mac: ethernet@4a100000 { ++ compatible = "ti,cpsw"; ++ ti,hwmods = "gmac"; ++ cpdma_channels = <8>; ++ ale_entries = <1024>; ++ bd_ram_size = <0x2000>; ++ no_bd_ram = <0>; ++ rx_descs = <64>; ++ mac_control = <0x20>; ++ slaves = <2>; ++ active_slave = <0>; ++ cpts_clock_mult = <0x80000000>; ++ cpts_clock_shift = <29>; ++ reg = <0x48484000 0x800 ++ 0x48485200 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ /* ++ * rx_thresh_pend ++ * rx_pend ++ * tx_pend ++ * misc_pend ++ */ ++ interrupts = , ++ , ++ , ++ ; ++ ranges; ++ status = "disabled"; ++ ++ davinci_mdio: mdio@4a101000 { ++ compatible = "ti,davinci_mdio"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ti,hwmods = "davinci_mdio"; ++ bus_freq = <1000000>; ++ reg = <0x48485000 0x100>; ++ }; ++ ++ cpsw_emac0: slave@4a100200 { ++ /* Filled in by U-Boot */ ++ mac-address = [ 00 00 00 00 00 00 ]; ++ }; ++ ++ cpsw_emac1: slave@4a100300 { ++ /* Filled in by U-Boot */ ++ mac-address = [ 00 00 00 00 00 00 ]; ++ }; ++ }; ++ ++ elm: elm@48078000 { ++ compatible = "ti,am3352-elm"; ++ /* compatible = "ti,elm"; */ ++ reg = <0x48078000 0x2000>; ++ interrupts = ; ++ ti,hwmods = "elm"; ++ status = "disabled"; ++ }; ++ ++ gpmc: gpmc@50000000 { ++ compatible = "ti,am3352-gpmc"; ++ /* compatible = "ti,gpmc"; */ ++ ti,hwmods = "gpmc"; ++ reg = <0x50000000 0x2000>; ++ interrupts = ; ++ gpmc,num-cs = <8>; ++ gpmc,num-waitpins = <2>; ++ #address-cells = <2>; ++ #size-cells = <1>; ++ status = "disabled"; ++ }; ++ ++ aes: aes@4b500000 { ++ compatible = "ti,omap4-aes"; ++ ti,hwmods = "aes"; ++ reg = <0x4b500000 0xa0>; ++ interrupts = ; ++ dmas = <&sdma 111>, <&sdma 110>; ++ dma-names = "tx", "rx"; ++ clocks = <&l3_iclk_div>; ++ clock-names = "fck"; ++ }; ++ ++ des: des@480a5000 { ++ compatible = "ti,omap4-des"; ++ ti,hwmods = "des"; ++ reg = <0x480a5000 0xa0>; ++ interrupts = ; ++ dmas = <&sdma 117>, <&sdma 116>; ++ dma-names = "tx", "rx"; ++ clocks = <&l3_iclk_div>; ++ clock-names = "fck"; ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "dra7xx-clocks.dtsi" ++ }; ++ ++ clockdomains { ++ coreaon_clkdm: coreaon_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll_usb_ck>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/dra7-evm.dts +@@ -0,0 +1,761 @@ ++/* ++ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++/dts-v1/; ++ ++#include "dra7.dtsi" ++#include ++ ++/ { ++ model = "TI DRA7"; ++ compatible = "ti,dra7-evm", "ti,dra752", "ti,dra7"; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x80000000 0x60000000>; /* 1536 MB */ ++ }; ++ ++ extcon1: gpio_usbvid_extcon1 { ++ compatible = "ti,gpio-usb-id"; ++ gpios = <&gpio21 1 0>; ++ }; ++ ++ extcon2: gpio_usbvid_extcon2 { ++ compatible = "ti,gpio-usb-id"; ++ gpios = <&gpio21 2 0>; ++ }; ++ ++ mmc2_3v3: fixedregulator-mmc2 { ++ compatible = "regulator-fixed"; ++ regulator-name = "mmc2_3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; ++}; ++ ++&dra7_pmx_core { ++ pinctrl-names = "default"; ++ pinctrl-0 = < ++ &vout1_pins ++ &irq_pins ++ >; ++ ++ i2c1_pins: pinmux_i2c1_pins { ++ pinctrl-single,pins = < ++ 0x400 0x60000 /* i2c1_sda */ ++ 0x404 0x60000 /* i2c1_scl */ ++ >; ++ }; ++ ++ i2c2_pins: pinmux_i2c2_pins { ++ pinctrl-single,pins = < ++ 0x408 0x60000 /* i2c2_sda */ ++ 0x40c 0x60000 /* i2c2_scl */ ++ >; ++ }; ++ ++ i2c3_pins: pinmux_i2c3_pins { ++ pinctrl-single,pins = < ++ 0x410 0x60000 /* i2c3_sda */ ++ 0x414 0x60000 /* i2c3_scl */ ++ >; ++ }; ++ ++ irq_pins: pinmux_irq_pins { ++ pinctrl-single,pins = < ++ 0x420 0x1 /* Wakeup2 INPUT | MODE1 */ ++ >; ++ }; ++ ++ mmc1_pins: pinmux_mmc1_pins { ++ pinctrl-single,pins = < ++ 0x36c 0x4000e /* mmc1sdcd.gpio INPUT | MODE15 */ ++ >; ++ }; ++ ++ mcspi1_pins: pinmux_mcspi1_pins { ++ pinctrl-single,pins = < ++ 0x3a4 0x40000 /* spi2_clk */ ++ 0x3a8 0x40000 /* spi2_d1 */ ++ 0x3ac 0x40000 /* spi2_d0 */ ++ 0x3b0 0xc0000 /* spi2_cs0 */ ++ 0x3b4 0xc0000 /* spi2_cs1 */ ++ 0x3b8 0xe0006 /* spi2_cs2 */ ++ 0x3bc 0xe0006 /* spi2_cs3 */ ++ >; ++ }; ++ ++ mcspi2_pins: pinmux_mcspi2_pins { ++ pinctrl-single,pins = < ++ 0x3c0 0x40000 /* spi2_sclk */ ++ 0x3c4 0xc0000 /* spi2_d1 */ ++ 0x3c8 0xc0000 /* spi2_d1 */ ++ 0x3cc 0xe0000 /* spi2_cs0 */ ++ >; ++ }; ++ ++ uart1_pins: pinmux_uart1_pins { ++ pinctrl-single,pins = < ++ 0x3e0 0xe0000 /* uart1_rxd */ ++ 0x3e4 0xe0000 /* uart1_txd */ ++ 0x3e8 0x60003 /* uart1_ctsn */ ++ 0x3ec 0x60003 /* uart1_rtsn */ ++ >; ++ }; ++ ++ uart2_pins: pinmux_uart2_pins { ++ pinctrl-single,pins = < ++ 0x3f0 0x60000 /* uart2_rxd */ ++ 0x3f4 0x60000 /* uart2_txd */ ++ 0x3f8 0x60000 /* uart2_ctsn */ ++ 0x3fc 0x60000 /* uart2_rtsn */ ++ >; ++ }; ++ ++ uart3_pins: pinmux_uart3_pins { ++ pinctrl-single,pins = < ++ 0x248 0xc0000 /* uart3_rxd */ ++ 0x24c 0xc0000 /* uart3_txd */ ++ >; ++ }; ++ ++ qspi1_pins: pinmux_qspi1_pins { ++ pinctrl-single,pins = < ++ 0x4c 0x40001 /* gpmc_a3.qspi1_cs2 */ ++ 0x50 0x40001 /* gpmc_a4.qspi1_cs3 */ ++ 0x74 0x40001 /* gpmc_a13.qspi1_rtclk */ ++ 0x78 0x40001 /* gpmc_a14.qspi1_d3 */ ++ 0x7c 0x40001 /* gpmc_a15.qspi1_d2 */ ++ 0x80 0x40001 /* gpmc_a16.qspi1_d1 */ ++ 0x84 0x40001 /* gpmc_a17.qspi1_d0 */ ++ 0x88 0x40001 /* qpmc_a18.qspi1_sclk */ ++ 0xb8 0x60001 /* gpmc_cs2.qspi1_cs0 */ ++ 0xbc 0x60001 /* gpmc_cs3.qspi1_cs1 */ ++ >; ++ }; ++ ++ usb1_pins: pinmux_usb1_pins { ++ pinctrl-single,pins = < ++ 0x280 0xc0000 /* usb1_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */ ++ >; ++ }; ++ ++ usb2_pins: pinmux_usb2_pins { ++ pinctrl-single,pins = < ++ 0x284 0xc0000 /* usb2_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */ ++ >; ++ }; ++ ++ vout1_pins: pinmux_vout1_pins { ++ pinctrl-single,pins = < ++ 0x1C8 0x0 /* vout1_clk OUTPUT | MODE0 */ ++ 0x1CC 0x0 /* vout1_de OUTPUT | MODE0 */ ++ 0x1D0 0x0 /* vout1_fld OUTPUT | MODE0 */ ++ 0x1D4 0x0 /* vout1_hsync OUTPUT | MODE0 */ ++ 0x1D8 0x0 /* vout1_vsync OUTPUT | MODE0 */ ++ 0x1DC 0x0 /* vout1_d0 OUTPUT | MODE0 */ ++ 0x1E0 0x0 /* vout1_d1 OUTPUT | MODE0 */ ++ 0x1E4 0x0 /* vout1_d2 OUTPUT | MODE0 */ ++ 0x1E8 0x0 /* vout1_d3 OUTPUT | MODE0 */ ++ 0x1EC 0x0 /* vout1_d4 OUTPUT | MODE0 */ ++ 0x1F0 0x0 /* vout1_d5 OUTPUT | MODE0 */ ++ 0x1F4 0x0 /* vout1_d6 OUTPUT | MODE0 */ ++ 0x1F8 0x0 /* vout1_d7 OUTPUT | MODE0 */ ++ 0x1FC 0x0 /* vout1_d8 OUTPUT | MODE0 */ ++ 0x200 0x0 /* vout1_d9 OUTPUT | MODE0 */ ++ 0x204 0x0 /* vout1_d10 OUTPUT | MODE0 */ ++ 0x208 0x0 /* vout1_d11 OUTPUT | MODE0 */ ++ 0x20C 0x0 /* vout1_d12 OUTPUT | MODE0 */ ++ 0x210 0x0 /* vout1_d13 OUTPUT | MODE0 */ ++ 0x214 0x0 /* vout1_d14 OUTPUT | MODE0 */ ++ 0x218 0x0 /* vout1_d15 OUTPUT | MODE0 */ ++ 0x21C 0x0 /* vout1_d16 OUTPUT | MODE0 */ ++ 0x220 0x0 /* vout1_d17 OUTPUT | MODE0 */ ++ 0x224 0x0 /* vout1_d18 OUTPUT | MODE0 */ ++ 0x228 0x0 /* vout1_d19 OUTPUT | MODE0 */ ++ 0x22C 0x0 /* vout1_d20 OUTPUT | MODE0 */ ++ 0x230 0x0 /* vout1_d21 OUTPUT | MODE0 */ ++ 0x234 0x0 /* vout1_d22 OUTPUT | MODE0 */ ++ 0x238 0x0 /* vout1_d23 OUTPUT | MODE0 */ ++ >; ++ }; ++ ++ cpsw_default: cpsw_default { ++ pinctrl-single,pins = < ++ /* Slave 1 */ ++ 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */ ++ 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */ ++ 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */ ++ 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */ ++ 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */ ++ 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */ ++ 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */ ++ 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */ ++ 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */ ++ 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */ ++ 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */ ++ 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */ ++ ++ /* Slave 2 */ ++ 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */ ++ 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */ ++ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */ ++ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */ ++ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */ ++ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */ ++ 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */ ++ 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */ ++ 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */ ++ 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */ ++ 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */ ++ 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */ ++ >; ++ ++ }; ++ cpsw_sleep: cpsw_sleep { ++ pinctrl-single,pins = < ++ /* Slave 1 */ ++ 0x250 (PIN_OFF_NONE) ++ 0x254 (PIN_OFF_NONE) ++ 0x258 (PIN_OFF_NONE) ++ 0x25c (PIN_OFF_NONE) ++ 0x260 (PIN_OFF_NONE) ++ 0x264 (PIN_OFF_NONE) ++ 0x268 (PIN_OFF_NONE) ++ 0x26c (PIN_OFF_NONE) ++ 0x270 (PIN_OFF_NONE) ++ 0x274 (PIN_OFF_NONE) ++ 0x278 (PIN_OFF_NONE) ++ 0x27c (PIN_OFF_NONE) ++ ++ /* Slave 1 */ ++ 0x198 (PIN_OFF_NONE) ++ 0x19c (PIN_OFF_NONE) ++ 0x1a0 (PIN_OFF_NONE) ++ 0x1a4 (PIN_OFF_NONE) ++ 0x1a8 (PIN_OFF_NONE) ++ 0x1ac (PIN_OFF_NONE) ++ 0x1b0 (PIN_OFF_NONE) ++ 0x1b4 (PIN_OFF_NONE) ++ 0x1b8 (PIN_OFF_NONE) ++ 0x1bc (PIN_OFF_NONE) ++ 0x1c0 (PIN_OFF_NONE) ++ 0x1c4 (PIN_OFF_NONE) ++ >; ++ }; ++ ++ davinci_mdio_default: davinci_mdio_default { ++ pinctrl-single,pins = < ++ /* MDIO */ ++ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_data */ ++ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk */ ++ >; ++ }; ++ ++ davinci_mdio_sleep: davinci_mdio_sleep { ++ pinctrl-single,pins = < ++ 0x23c (PIN_OFF_NONE) ++ 0x240 (PIN_OFF_NONE) ++ >; ++ }; ++ ++ nand_flash_x16: nand_flash_x16 { ++ /* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch ++ * So NAND flash requires following switch settings: ++ * SW5.9 (GPMC_WPN) = LOW ++ * SW5.1 (NAND_BOOTn) = HIGH */ ++ pinctrl-single,pins = < ++ 0x0 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad0 */ ++ 0x4 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad1 */ ++ 0x8 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad2 */ ++ 0xc 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad3 */ ++ 0x10 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad4 */ ++ 0x14 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad5 */ ++ 0x18 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad6 */ ++ 0x1c 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad7 */ ++ 0x20 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad8 */ ++ 0x24 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad9 */ ++ 0x28 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad10 */ ++ 0x2c 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad11 */ ++ 0x30 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad12 */ ++ 0x34 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad13 */ ++ 0x38 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad14 */ ++ 0x3c 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_ad15 */ ++ 0xD8 0x70000 /* (PIN_INPUT | MUX_MODE0) gpmc_wait0 */ ++ 0xCC 0x0 /* (PIN_OUTPUT | MUX_MODE0) gpmc_wen */ ++ 0xB4 0x0 /* (PIN_OUTPUT | MUX_MODE0) gpmc_csn0 */ ++ 0xC4 0x0 /* (PIN_OUTPUT | MUX_MODE0) gpmc_advn_ale */ ++ 0xC8 0x0 /* (PIN_OUTPUT | MUX_MODE0) gpmc_oen_ren */ ++ 0xD0 0x0 /* (PIN_OUTPUT | MUX_MODE0) gpmc_be0n_cle */ ++ >; ++ }; ++}; ++ ++&i2c1 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c1_pins>; ++ clock-frequency = <400000>; ++ ++ tps659038: tps659038@58 { ++ compatible = "ti,tps659038"; ++ reg = <0x58>; ++ ++ tps659038_pmic { ++ compatible = "ti,tps659038-pmic"; ++ ++ regulators { ++ smps123_reg: smps123 { ++ /* VDD_MPU */ ++ regulator-name = "smps123"; ++ regulator-min-microvolt = < 850000>; ++ regulator-max-microvolt = <1250000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ smps45_reg: smps45 { ++ /* VDD_DSPEVE */ ++ regulator-name = "smps45"; ++ regulator-min-microvolt = < 850000>; ++ regulator-max-microvolt = <1150000>; ++ regulator-boot-on; ++ }; ++ ++ smps6_reg: smps6 { ++ /* VDD_GPU - over VDD_SMPS6 */ ++ regulator-name = "smps6"; ++ regulator-min-microvolt = <850000>; ++ regulator-max-microvolt = <12500000>; ++ regulator-boot-on; ++ }; ++ ++ smps7_reg: smps7 { ++ /* CORE_VDD */ ++ regulator-name = "smps7"; ++ regulator-min-microvolt = <850000>; ++ regulator-max-microvolt = <1030000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ smps8_reg: smps8 { ++ /* VDD_IVAHD */ ++ regulator-name = "smps8"; ++ regulator-min-microvolt = < 850000>; ++ regulator-max-microvolt = <1250000>; ++ regulator-boot-on; ++ }; ++ ++ smps9_reg: smps9 { ++ /* VDDS1V8 */ ++ regulator-name = "smps9"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ ldo1_reg: ldo1 { ++ /* LDO1_OUT --> SDIO */ ++ regulator-name = "ldo1"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ }; ++ ++ ldo2_reg: ldo2 { ++ /* VDD_RTCIO */ ++ /* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */ ++ regulator-name = "ldo2"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ }; ++ ++ ldo3_reg: ldo3 { ++ /* VDDA_1V8_PHY */ ++ regulator-name = "ldo3"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-boot-on; ++ }; ++ ++ ldo9_reg: ldo9 { ++ /* VDD_RTC */ ++ regulator-name = "ldo9"; ++ regulator-min-microvolt = <1050000>; ++ regulator-max-microvolt = <1050000>; ++ regulator-boot-on; ++ }; ++ ++ ldoln_reg: ldoln { ++ /* VDDA_1V8_PLL */ ++ regulator-name = "ldoln"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ regulator-boot-on; ++ }; ++ ++ ldousb_reg: ldousb { ++ /* VDDA_3V_USB: VDDA_USBHS33 */ ++ regulator-name = "ldousb"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ }; ++ ++ }; ++ }; ++ }; ++ ++ pcf_gpio_20: gpio@20 { ++ compatible = "ti,pcf8575"; ++ reg = <0x20>; ++ lines-initial-states = <0x4000>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-parent = <&gpio6>; ++ interrupts = <11 2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio21: gpio@21 { ++ compatible = "ti,pcf8575"; ++ reg = <0x21>; ++ lines-initial-states = <0x1408>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-parent = <&pcf_gpio_20>; ++ interrupts = <14 2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ /* TLC chip for LCD panel power and backlight */ ++ tlc59108: tlc59108@40 { ++ compatible = "ti,tlc59108"; ++ reg = <0x40>; ++ gpios = <&pcf_gpio_20 13 0>; /* P15, CON_LCD_PWR_DN */ ++ video-source = <&dpi1>; ++ data-lines = <24>; ++ }; ++ ++ mxt244: touchscreen@4a { ++ compatible = "atmel,mXT244"; ++ status = "okay"; ++ reg = <0x4a>; ++ interrupts = <0 119 0x4>; ++ ++ atmel,config = < ++ /* MXT244_GEN_COMMAND(6) */ ++ 0x00 0x00 0x00 0x00 0x00 0x00 ++ /* MXT244_GEN_POWER(7) */ ++ 0x20 0xff 0x32 ++ /* MXT244_GEN_ACQUIRE(8) */ ++ 0x0a 0x00 0x05 0x00 0x00 0x00 0x09 0x23 ++ /* MXT244_TOUCH_MULTI(9) */ ++ 0x00 0x00 0x00 0x13 0x0b 0x00 0x00 0x00 0x02 0x00 ++ 0x00 0x01 0x01 0x0e 0x0a 0x0a 0x0a 0x0a 0x00 0x00 ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ 0x00 ++ /* MXT244_TOUCH_KEYARRAY(15) */ ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ 0x00 ++ /* MXT244_COMMSCONFIG_T18(2) */ ++ 0x00 0x00 ++ /* MXT244_SPT_GPIOPWM(19) */ ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ 0x00 0x00 0x00 0x00 0x00 0x00 ++ /* MXT244_PROCI_GRIPFACE(20) */ ++ 0x07 0x00 0x00 0x00 0x00 0x00 0x00 0x50 0x28 0x04 ++ 0x0f 0x0a ++ /* MXT244_PROCG_NOISE(22) */ ++ 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x03 0x23 0x00 ++ 0x00 0x05 0x0f 0x19 0x23 0x2d 0x03 ++ /* MXT244_TOUCH_PROXIMITY(23) */ ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ 0x00 0x00 0x00 0x00 0x00 ++ /* MXT244_PROCI_ONETOUCH(24) */ ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ /* MXT244_SPT_SELFTEST(25) */ ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ 0x00 0x00 0x00 0x00 ++ /* MXT244_PROCI_TWOTOUCH(27) */ ++ 0x00 0x00 0x00 0x00 0x00 0x00 0x00 ++ /* MXT244_SPT_CTECONFIG(28) */ ++ 0x00 0x00 0x02 0x08 0x10 0x00 ++ >; ++ ++ atmel,x_line = <18>; ++ atmel,y_line = <12>; ++ atmel,x_size = <800>; ++ atmel,y_size = <480>; ++ atmel,blen = <0x01>; ++ atmel,threshold = <30>; ++ atmel,voltage = <2800000>; ++ atmel,orient = <0x4>; ++ }; ++}; ++ ++&i2c2 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins>; ++ clock-frequency = <400000>; ++ ++ pcf_hdmi: gpio@26 { ++ compatible = "nxp,pcf8575"; ++ reg = <0x26>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++}; ++ ++&i2c3 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c3_pins>; ++ clock-frequency = <3400000>; ++}; ++ ++&mcspi1 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mcspi1_pins>; ++}; ++ ++&mcspi2 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mcspi2_pins>; ++}; ++ ++&uart1 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++}; ++ ++&uart2 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins>; ++}; ++ ++&uart3 { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins>; ++}; ++ ++&qspi { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&qspi1_pins>; ++ ++ spi-max-frequency = <48000000>; ++ m25p80@0 { ++ compatible = "s25fl256s1"; ++ spi-max-frequency = <48000000>; ++ reg = <0>; ++ spi-tx-bus-width = <1>; ++ spi-rx-bus-width = <4>; ++ spi-cpol; ++ spi-cpha; ++ }; ++}; ++ ++&usb1 { ++ dr_mode = "peripheral"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb1_pins>; ++}; ++ ++&usb2 { ++ dr_mode = "host"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&usb2_pins>; ++}; ++ ++&dwc3_1 { ++ extcon = <&extcon1>; ++}; ++ ++&dwc3_2 { ++ extcon = <&extcon2>; ++}; ++ ++&mmc1 { ++ status = "okay"; ++ vmmc-supply = <&ldo1_reg>; ++ bus-width = <4>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; ++ cd-gpios = <&gpio6 27 0>; /* gpio 187 */ ++}; ++ ++&mmc2 { ++ status = "okay"; ++ vmmc-supply = <&mmc2_3v3>; ++ bus-width = <8>; ++ ti,non-removable; ++}; ++ ++&dss { ++ vdda_video-supply = <&ldoln_reg>; ++}; ++ ++&hdmi { ++ vdda_hdmi_dac-supply = <&ldo3_reg>; ++}; ++ ++&avs_mpu { ++ avs-supply = <&smps123_reg>; ++}; ++ ++&avs_core { ++ avs-supply = <&smps7_reg>; ++}; ++ ++&avs_gpu { ++ avs-supply = <&smps6_reg>; ++}; ++ ++&avs_dspeve { ++ avs-supply = <&smps45_reg>; ++}; ++ ++&avs_iva { ++ avs-supply = <&smps8_reg>; ++}; ++ ++&cpu0 { ++ cpu0-supply = <&avs_mpu>; ++}; ++ ++/ { ++ aliases { ++ display0 = &tlc59108; ++ display1 = &hdmi0; ++ }; ++ ++ tpd12s015: encoder@0 { ++ compatible = "ti,draevm-tpd12s015"; ++ ++ video-source = <&hdmi>; ++ ++ gpios = <&pcf_hdmi 4 0>, /* P4, CT CP HPD */ ++ <&pcf_hdmi 5 0>, /* P5, LS OE */ ++ <&gpio7 12 0>; /* gpio7_12/sp1_cs2, HPD */ ++ }; ++ ++ hdmi0: connector@0 { ++ compatible = "ti,hdmi_connector"; ++ ++ video-source = <&tpd12s015>; ++ }; ++}; ++ ++&mac { ++ status = "okay"; ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&cpsw_default>; ++ pinctrl-1 = <&cpsw_sleep>; ++}; ++ ++&cpsw_emac0 { ++ phy_id = <&davinci_mdio>, <2>; ++}; ++ ++&cpsw_emac1 { ++ phy_id = <&davinci_mdio>, <3>; ++}; ++ ++&davinci_mdio { ++ pinctrl-names = "default", "sleep"; ++ pinctrl-0 = <&davinci_mdio_default>; ++ pinctrl-1 = <&davinci_mdio_sleep>; ++}; ++ ++&elm { ++ status = "okay"; ++}; ++ ++&gpmc { ++ status = "okay"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&nand_flash_x16>; ++ ranges = <0 0 0x08000000 0x10000000>; ++ nand@0,0 { ++ reg = <0 0 0>; ++ nand-bus-width = <16>; ++ ti,nand-ecc-opt = "bch8"; ++ gpmc,device-width = <2>; ++ gpmc,sync-clk-ps = <0>; ++ gpmc,cs-on-ns = <0>; ++ gpmc,cs-rd-off-ns = <55>; ++ gpmc,cs-wr-off-ns = <55>; ++ gpmc,adv-on-ns = <0>; ++ gpmc,adv-rd-off-ns = <55>; ++ gpmc,adv-wr-off-ns = <55>; ++ gpmc,we-on-ns = <5>; ++ gpmc,we-off-ns = <40>; ++ gpmc,oe-on-ns = <2>; ++ gpmc,oe-off-ns = <45>; ++ gpmc,access-ns = <40>; ++ gpmc,wr-access-ns = <37>; ++ gpmc,rd-cycle-ns = <55>; ++ gpmc,wr-cycle-ns = <55>; ++ gpmc,wait-on-read = "true"; ++ gpmc,wait-on-write = "true"; ++ gpmc,bus-turnaround-ns = <0>; ++ gpmc,cycle2cycle-delay-ns = <0>; ++ gpmc,clk-activation-ns = <0>; ++ gpmc,wait-monitoring-ns = <0>; ++ gpmc,wr-data-mux-bus-ns = <0>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ti,elm-id = <&elm>; ++ /* MTD partition table */ ++ partition@0 { ++ label = "SPL1"; ++ reg = <0x00000000 0x000020000>; ++ }; ++ partition@1 { ++ label = "SPL2"; ++ reg = <0x00020000 0x00020000>; ++ }; ++ partition@2 { ++ label = "SPL3"; ++ reg = <0x00040000 0x00020000>; ++ }; ++ partition@3 { ++ label = "SPL4"; ++ reg = <0x00060000 0x00020000>; ++ }; ++ partition@4 { ++ label = "U-boot"; ++ reg = <0x00080000 0x001e0000>; ++ }; ++ partition@5 { ++ label = "environment"; ++ reg = <0x00260000 0x00020000>; ++ }; ++ partition@6 { ++ label = "Kernel"; ++ reg = <0x00280000 0x00500000>; ++ }; ++ partition@7 { ++ label = "File-System"; ++ reg = <0x00780000 0x0F880000>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi +@@ -0,0 +1,2103 @@ ++/* ++ * Device Tree Source for DRA7xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++atl_clkin0_ck: atl_clkin0_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++atl_clkin1_ck: atl_clkin1_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++atl_clkin2_ck: atl_clkin2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++atlclkin3_ck: atlclkin3_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++hdmi_clkin_ck: hdmi_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++mlb_clkin_ck: mlb_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++mlbp_clkin_ck: mlbp_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++pciesref_acs_clk_ck: pciesref_acs_clk_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <100000000>; ++}; ++ ++ref_clkin0_ck: ref_clkin0_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++ref_clkin1_ck: ref_clkin1_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++ref_clkin2_ck: ref_clkin2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++ref_clkin3_ck: ref_clkin3_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++rmii_clk_ck: rmii_clk_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++sdvenc_clkin_ck: sdvenc_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++secure_32k_clk_src_ck: secure_32k_clk_src_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++sys_32k_ck: sys_32k_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++virt_12000000_ck: virt_12000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++virt_13000000_ck: virt_13000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <13000000>; ++}; ++ ++virt_16800000_ck: virt_16800000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <16800000>; ++}; ++ ++virt_19200000_ck: virt_19200000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <19200000>; ++}; ++ ++virt_20000000_ck: virt_20000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <20000000>; ++}; ++ ++virt_26000000_ck: virt_26000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <26000000>; ++}; ++ ++virt_27000000_ck: virt_27000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <27000000>; ++}; ++ ++virt_38400000_ck: virt_38400000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <38400000>; ++}; ++ ++sys_clkin1: sys_clkin1@4ae06110 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&virt_12000000_ck>, <&virt_20000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; ++ reg = <0x4ae06110 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++sys_clkin2: sys_clkin2 { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <22579200>; ++}; ++ ++usb_otg_clkin_ck: usb_otg_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++video1_clkin_ck: video1_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++video1_m2_clkin_ck: video1_m2_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++video2_clkin_ck: video2_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++video2_m2_clkin_ck: video2_m2_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++abe_dpll_sys_clk_mux: abe_dpll_sys_clk_mux@4ae06118 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin1>, <&sys_clkin2>; ++ reg = <0x4ae06118 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@4ae06114 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; ++ reg = <0x4ae06114 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++abe_dpll_clk_mux: abe_dpll_clk_mux@4ae0610c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_dpll_sys_clk_mux>, <&sys_32k_ck>; ++ reg = <0x4ae0610c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll_abe_ck: dpll_abe_ck@4a0051e0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-m4xen-clock"; ++ clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; ++ reg = <0x4a0051e0 0x4>, <0x4a0051e4 0x4>, <0x4a0051e8 0x4>, <0x4a0051ec 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_abe_x2_ck: dpll_abe_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_abe_ck>; ++}; ++ ++dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@4a0051f0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_abe_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0051f0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++abe_24m_fclk: abe_24m_fclk@4ae0611c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ reg = <0x4ae0611c 0x4>; ++ table = < 8 0 >, < 16 1 >; ++ bit-mask = <0x1>; ++}; ++ ++abe_clk: abe_clk@4a005108 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ reg = <0x4a005108 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++aess_fclk: aess_fclk@4ae06178 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&abe_clk>; ++ reg = <0x4ae06178 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++abe_giclk_div: abe_giclk_div@4ae06174 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&aess_fclk>; ++ reg = <0x4ae06174 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++abe_lp_clk_div: abe_lp_clk_div@4ae061d8 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ reg = <0x4ae061d8 0x4>; ++ table = < 16 0 >, < 32 1 >; ++ bit-mask = <0x1>; ++}; ++ ++abe_sys_clk_div: abe_sys_clk_div@4ae06120 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin1>; ++ reg = <0x4ae06120 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++adc_gfclk_mux: adc_gfclk_mux@4ae061dc { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin1>, <&sys_clkin2>, <&sys_32k_ck>; ++ reg = <0x4ae061dc 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++dpll_pcie_ref_ck: dpll_pcie_ref_ck@4a008200 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&sys_clkin1>; ++ reg = <0x4a008200 0x4>, <0x4a008204 0x4>, <0x4a008208 0x4>, <0x4a00820c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck@4a008210 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_pcie_ref_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008210 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { ++ compatible = "mux-clock"; ++ clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>; ++ #clock-cells = <0>; ++ reg = <0x4a00821c 0x4>; ++ bit-mask = <0x80>; ++}; ++ ++apll_pcie_ck: apll_pcie_ck@4a008200 { ++ #clock-cells = <0>; ++ compatible = "ti,dra7-apll-clock"; ++ clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; ++ reg = <0x4a00821c 0x4>, <0x4a008220 0x4>; ++ reg-names = "control", "idlest"; ++}; ++ ++apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&apll_pcie_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++apll_pcie_clkvcoldo_div: apll_pcie_clkvcoldo_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&apll_pcie_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++apll_pcie_m2_ck: apll_pcie_m2_ck@4a008224 { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&apll_pcie_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sys_clk1_dclk_div: sys_clk1_dclk_div@4ae061c8 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin1>; ++ reg = <0x4ae061c8 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++sys_clk2_dclk_div: sys_clk2_dclk_div@4ae061cc { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin2>; ++ reg = <0x4ae061cc 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++dpll_abe_m2_ck: dpll_abe_m2_ck@4a0051f0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_abe_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0051f0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++per_abe_x1_dclk_div: per_abe_x1_dclk_div@4ae061bc { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2_ck>; ++ reg = <0x4ae061bc 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@4a0051f4 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_abe_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0051f4 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_ck: dpll_core_ck@4a005120 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-core-clock"; ++ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ++ reg = <0x4a005120 0x4>, <0x4a005124 0x4>, <0x4a005128 0x4>, <0x4a00512c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_core_x2_ck: dpll_core_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_core_ck>; ++}; ++ ++dpll_core_h12x2_ck: dpll_core_h12x2_ck@4a00513c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00513c 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_mpu_ck: dpll_mpu_ck@4a005160 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&mpu_dpll_hs_clk_div>; ++ reg = <0x4a005160 0x4>, <0x4a005164 0x4>, <0x4a005168 0x4>, <0x4a00516c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a005170 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_mpu_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005170 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++mpu_dclk_div: mpu_dclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_mpu_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dsp_dpll_hs_clk_div: dsp_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_dsp_ck: dpll_dsp_ck@4a005234 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>; ++ reg = <0x4a005234 0x4>, <0x4a005238 0x4>, <0x4a00523c 0x4>, <0x4a005240 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_dsp_m2_ck: dpll_dsp_m2_ck@4a005244 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_dsp_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005244 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dsp_gclk_div: dsp_gclk_div@4ae0618c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_dsp_m2_ck>; ++ reg = <0x4ae0618c 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_iva_ck: dpll_iva_ck@4a0051a0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>; ++ reg = <0x4a0051a0 0x4>, <0x4a0051a4 0x4>, <0x4a0051a8 0x4>, <0x4a0051ac 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_iva_m2_ck: dpll_iva_m2_ck@4a0051b0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_iva_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0051b0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++iva_dclk: iva_dclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_iva_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_gpu_ck: dpll_gpu_ck@4a0052d8 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ++ reg = <0x4a0052d8 0x4>, <0x4a0052dc 0x4>, <0x4a0052e0 0x4>, <0x4a0052e4 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_gpu_m2_ck: dpll_gpu_m2_ck@4a0052e8 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_gpu_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0052e8 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++gpu_dclk: gpu_dclk@4ae061a0 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_gpu_m2_ck>; ++ reg = <0x4ae061a0 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++dpll_core_m2_ck: dpll_core_m2_ck@4a005130 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005130 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++core_dpll_out_dclk_div: core_dpll_out_dclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_ddr_ck: dpll_ddr_ck@4a005210 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ++ reg = <0x4a005210 0x4>, <0x4a005214 0x4>, <0x4a005218 0x4>, <0x4a00521c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_ddr_m2_ck: dpll_ddr_m2_ck@4a005220 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_ddr_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005220 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++emif_phy_dclk_div: emif_phy_dclk_div@4ae06190 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_ddr_m2_ck>; ++ reg = <0x4ae06190 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++dpll_gmac_ck: dpll_gmac_ck@4a0052a8 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>; ++ reg = <0x4a0052a8 0x4>, <0x4a0052ac 0x4>, <0x4a0052b0 0x4>, <0x4a0052b4 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_gmac_m2_ck: dpll_gmac_m2_ck@4a0052b8 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_gmac_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0052b8 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++gmac_250m_dclk_div: gmac_250m_dclk_div@4ae0619c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_gmac_m2_ck>; ++ reg = <0x4ae0619c 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++video2_dclk_div: video2_dclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&video2_m2_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++video1_dclk_div: video1_dclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&video1_m2_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++hdmi_dclk_div: hdmi_dclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&hdmi_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++per_dpll_hs_clk_div: per_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m3x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++dpll_per_ck: dpll_per_ck@4a008140 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>; ++ reg = <0x4a008140 0x4>, <0x4a008144 0x4>, <0x4a008148 0x4>, <0x4a00814c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_per_m2_ck: dpll_per_m2_ck@4a008150 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008150 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++func_96m_aon_dclk_div: func_96m_aon_dclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m3x2_ck>; ++ clock-mult = <1>; ++ clock-div = <3>; ++}; ++ ++dpll_usb_ck: dpll_usb_ck@4a008180 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-j-type-clock"; ++ clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>; ++ reg = <0x4a008180 0x4>, <0x4a008184 0x4>, <0x4a008188 0x4>, <0x4a00818c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_usb_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008190 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++l3init_480m_dclk_div: l3init_480m_dclk_div@4ae061ac { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ reg = <0x4ae061ac 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++usb_otg_dclk_div: usb_otg_dclk_div@4ae06184 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&usb_otg_clkin_ck>; ++ reg = <0x4ae06184 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++sata_dclk_div: sata_dclk_div@4ae061c0 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin1>; ++ reg = <0x4ae061c0 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++dpll_pcie_ref_m2_ck: dpll_pcie_ref_m2_ck@4a008210 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_pcie_ref_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008210 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++pcie2_dclk_div: pcie2_dclk_div@4ae061b8 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_pcie_ref_m2_ck>; ++ reg = <0x4ae061b8 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++pcie_dclk_div: pcie_dclk_div@4ae061b4 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&apll_pcie_m2_ck>; ++ reg = <0x4ae061b4 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++emu_dclk_div: emu_dclk_div@4ae06194 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin1>; ++ reg = <0x4ae06194 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++secure_32k_dclk_div: secure_32k_dclk_div@4ae061c4 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&secure_32k_clk_src_ck>; ++ reg = <0x4ae061c4 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++eve_dpll_hs_clk_div: eve_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_eve_ck: dpll_eve_ck@4a005284 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>; ++ reg = <0x4a005284 0x4>, <0x4a005288 0x4>, <0x4a00528c 0x4>, <0x4a005290 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_eve_m2_ck: dpll_eve_m2_ck@4a005294 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_eve_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005294 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++eve_dclk_div: eve_dclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_eve_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++clkoutmux0_clk_mux: clkoutmux0_clk_mux@4ae06158 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; ++ reg = <0x4ae06158 0x4>; ++ bit-mask = <0x1f>; ++}; ++ ++clkoutmux1_clk_mux: clkoutmux1_clk_mux@4ae0615c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; ++ reg = <0x4ae0615c 0x4>; ++ bit-mask = <0x1f>; ++}; ++ ++clkoutmux2_clk_mux: clkoutmux2_clk_mux@4ae06160 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clk1_dclk_div>, <&sys_clk2_dclk_div>, <&per_abe_x1_dclk_div>, <&mpu_dclk_div>, <&dsp_gclk_div>, <&iva_dclk>, <&gpu_dclk>, <&core_dpll_out_dclk_div>, <&emif_phy_dclk_div>, <&gmac_250m_dclk_div>, <&video2_dclk_div>, <&video1_dclk_div>, <&hdmi_dclk_div>, <&func_96m_aon_dclk_div>, <&l3init_480m_dclk_div>, <&usb_otg_dclk_div>, <&sata_dclk_div>, <&pcie2_dclk_div>, <&pcie_dclk_div>, <&emu_dclk_div>, <&secure_32k_dclk_div>, <&eve_dclk_div>; ++ reg = <0x4ae06160 0x4>; ++ bit-mask = <0x1f>; ++}; ++ ++custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin1>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++dpll_core_h13x2_ck: dpll_core_h13x2_ck@4a005140 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005140 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h14x2_ck: dpll_core_h14x2_ck@4a005144 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005144 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h22x2_ck: dpll_core_h22x2_ck@4a005154 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005154 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h23x2_ck: dpll_core_h23x2_ck@4a005158 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005158 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h24x2_ck: dpll_core_h24x2_ck@4a00515c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00515c 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_ddr_x2_ck: dpll_ddr_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_ddr_ck>; ++}; ++ ++dpll_ddr_h11x2_ck: dpll_ddr_h11x2_ck@4a005228 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_ddr_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005228 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_dsp_x2_ck: dpll_dsp_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_dsp_ck>; ++}; ++ ++dpll_dsp_m3x2_ck: dpll_dsp_m3x2_ck@4a005248 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_dsp_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a005248 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_gmac_x2_ck: dpll_gmac_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_gmac_ck>; ++}; ++ ++dpll_gmac_h11x2_ck: dpll_gmac_h11x2_ck@4a0052c0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_gmac_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0052c0 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_gmac_h12x2_ck: dpll_gmac_h12x2_ck@4a0052c4 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_gmac_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0052c4 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_gmac_h13x2_ck: dpll_gmac_h13x2_ck@4a0052c8 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_gmac_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0052c8 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_gmac_m3x2_ck: dpll_gmac_m3x2_ck@4a0052bc { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_gmac_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0052bc 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_x2_ck: dpll_per_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_per_ck>; ++}; ++ ++dpll_per_h11x2_ck: dpll_per_h11x2_ck@4a008158 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008158 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_h12x2_ck: dpll_per_h12x2_ck@4a00815c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00815c 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_h13x2_ck: dpll_per_h13x2_ck@4a008160 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008160 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_h14x2_ck: dpll_per_h14x2_ck@4a008164 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008164 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m2x2_ck: dpll_per_m2x2_ck@4a008150 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008150 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_usb_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++eve_clk: eve_clk@4ae06180 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_eve_m2_ck>, <&dpll_dsp_m3x2_ck>; ++ reg = <0x4ae06180 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++func_128m_clk: func_128m_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_h11x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++func_12m_fclk: func_12m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <16>; ++}; ++ ++func_24m_clk: func_24m_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++func_48m_fclk: func_48m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++func_96m_fclk: func_96m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++gmii_m_clk_div: gmii_m_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_gmac_h11x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++hdmi_clk2_div: hdmi_clk2_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&hdmi_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++hdmi_div_clk: hdmi_div_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&hdmi_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++hdmi_dpll_clk_mux: hdmi_dpll_clk_mux@4ae061a4 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin1>, <&sys_clkin2>; ++ reg = <0x4ae061a4 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++l3_iclk_div: l3_iclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l3init_60m_fclk: l3init_60m_fclk@4a008104 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ reg = <0x4a008104 0x4>; ++ table = < 1 0 >, < 8 1 >; ++ bit-mask = <0x1>; ++}; ++ ++l3init_960m_gfclk: l3init_960m_gfclk@4a0086c0 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_usb_clkdcoldo>; ++ bit-shift = <8>; ++ reg = <0x4a0086c0 0x4>; ++}; ++ ++l4_root_clk_div: l4_root_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l3_iclk_div>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mlb_clk: mlb_clk@4ae06134 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mlb_clkin_ck>; ++ reg = <0x4ae06134 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++mlbp_clk: mlbp_clk@4ae06130 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mlbp_clkin_ck>; ++ reg = <0x4ae06130 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++per_abe_x1_gfclk2_div: per_abe_x1_gfclk2_div@4ae06138 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2_ck>; ++ reg = <0x4ae06138 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++timer_sys_clk_div: timer_sys_clk_div@4ae06144 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin1>; ++ reg = <0x4ae06144 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++video1_clk2_div: video1_clk2_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&video1_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++video1_div_clk: video1_div_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&video1_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++video1_dpll_clk_mux: video1_dpll_clk_mux@4ae061d0 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin1>, <&sys_clkin2>; ++ reg = <0x4ae061d0 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++video2_clk2_div: video2_clk2_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&video2_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++video2_div_clk: video2_div_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&video2_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++video2_dpll_clk_mux: video2_dpll_clk_mux@4ae061d4 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin1>, <&sys_clkin2>; ++ reg = <0x4ae061d4 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++wkupaon_iclk_mux: wkupaon_iclk_mux@4ae06108 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin1>, <&abe_lp_clk_div>; ++ reg = <0x4ae06108 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dss_32khz_clk: dss_32khz_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <11>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_48mhz_clk: dss_48mhz_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_48m_fclk>; ++ bit-shift = <9>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_dss_clk: dss_dss_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_h12x2_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_hdmi_clk: dss_hdmi_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&hdmi_dpll_clk_mux>; ++ bit-shift = <10>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_video1_clk: dss_video1_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&video1_dpll_clk_mux>; ++ bit-shift = <12>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_video2_clk: dss_video2_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&video2_dpll_clk_mux>; ++ bit-shift = <13>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_deshdcp_clk: dss_deshdcp_clk@4a002558 { ++ compatible = "gate-clock"; ++ clocks = <&l3_iclk_div>; ++ #clock-cells = <0>; ++ reg = <0x4a002558 0x1>; ++ bit-shift = <0>; ++}; ++ ++gpio1_dbclk: gpio1_dbclk@4ae07838 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4ae07838 0x4>; ++}; ++ ++gpio2_dbclk: gpio2_dbclk@4a009760 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009760 0x4>; ++}; ++ ++gpio3_dbclk: gpio3_dbclk@4a009768 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009768 0x4>; ++}; ++ ++gpio4_dbclk: gpio4_dbclk@4a009770 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009770 0x4>; ++}; ++ ++gpio5_dbclk: gpio5_dbclk@4a009778 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009778 0x4>; ++}; ++ ++gpio6_dbclk: gpio6_dbclk@4a009780 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009780 0x4>; ++}; ++ ++gpio7_dbclk: gpio7_dbclk@4a009810 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009810 0x4>; ++}; ++ ++gpio8_dbclk: gpio8_dbclk@4a009818 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009818 0x4>; ++}; ++ ++mmc1_clk32k: mmc1_clk32k@4a009328 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009328 0x4>; ++}; ++ ++mmc2_clk32k: mmc2_clk32k@4a009330 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009330 0x4>; ++}; ++ ++mmc3_clk32k: mmc3_clk32k@4a009820 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009820 0x4>; ++}; ++ ++mmc4_clk32k: mmc4_clk32k@4a009828 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009828 0x4>; ++}; ++ ++sata_ref_clk: sata_ref_clk@4a009388 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_clkin1>; ++ bit-shift = <8>; ++ reg = <0x4a009388 0x4>; ++}; ++ ++usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m@4a0093f0 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_960m_gfclk>; ++ bit-shift = <8>; ++ reg = <0x4a0093f0 0x4>; ++}; ++ ++usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m@4a009340 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_960m_gfclk>; ++ bit-shift = <8>; ++ reg = <0x4a009340 0x4>; ++}; ++ ++usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k@4a008640 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a008640 0x4>; ++}; ++ ++usb_phy2_always_on_clk32k: usb_phy2_always_on_clk32k@4a008688 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a008688 0x4>; ++}; ++ ++usb_phy3_always_on_clk32k: usb_phy3_always_on_clk32k@4a008698 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a008698 0x4>; ++}; ++ ++atl_dpll_clk_mux: atl_dpll_clk_mux@4a008c00 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_32k_ck>, <&video1_clkin_ck>, <&video2_clkin_ck>, <&hdmi_clkin_ck>; ++ bit-shift = <24>; ++ reg = <0x4a008c00 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++atl_gfclk_mux: atl_gfclk_mux@4a008c00 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&l3_iclk_div>, <&dpll_abe_m2_ck>, <&atl_dpll_clk_mux>; ++ bit-shift = <26>; ++ reg = <0x4a008c00 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++dcan1_sys_clk_mux: dcan1_sys_clk_mux@4ae07888 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin1>, <&sys_clkin2>; ++ bit-shift = <24>; ++ reg = <0x4ae07888 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gmac_gmii_ref_clk_div: gmac_gmii_ref_clk_div@4a0093d0 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_gmac_m2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a0093d0 0x4>; ++ table = < 2 0 >; ++ bit-mask = <0x1>; ++}; ++ ++gmac_rft_clk_mux: gmac_rft_clk_mux@4a0093d0 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&video1_clkin_ck>, <&video2_clkin_ck>, <&dpll_abe_m2_ck>, <&hdmi_clkin_ck>, <&l3_iclk_div>; ++ bit-shift = <25>; ++ reg = <0x4a0093d0 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++gpu_core_gclk_mux: gpu_core_gclk_mux@4a009220 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009220 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@4a009220 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>, <&dpll_gpu_m2_ck>; ++ bit-shift = <26>; ++ reg = <0x4a009220 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++ipu1_gfclk_mux: ipu1_gfclk_mux@4a005520 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_abe_m2x2_ck>, <&dpll_core_h22x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a005520 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++l3instr_ts_gclk_div: l3instr_ts_gclk_div@4a008e50 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&wkupaon_iclk_mux>; ++ bit-shift = <24>; ++ reg = <0x4a008e50 0x4>; ++ table = < 8 0 >, < 16 1 >, < 32 2 >; ++ bit-mask = <0x3>; ++}; ++ ++mcasp1_ahclkr_mux: mcasp1_ahclkr_mux@4a005550 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <28>; ++ reg = <0x4a005550 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp1_ahclkx_mux: mcasp1_ahclkx_mux@4a005550 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <24>; ++ reg = <0x4a005550 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp1_aux_gfclk_mux: mcasp1_aux_gfclk_mux@4a005550 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <22>; ++ reg = <0x4a005550 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp2_ahclkr_mux: mcasp2_ahclkr_mux@4a009860 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <28>; ++ reg = <0x4a009860 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp2_ahclkx_mux: mcasp2_ahclkx_mux@4a009860 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <28>; ++ reg = <0x4a009860 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp2_aux_gfclk_mux: mcasp2_aux_gfclk_mux@4a009860 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <22>; ++ reg = <0x4a009860 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp3_ahclkx_mux: mcasp3_ahclkx_mux@4a009868 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009868 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp3_aux_gfclk_mux: mcasp3_aux_gfclk_mux@4a009868 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <22>; ++ reg = <0x4a009868 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp4_ahclkx_mux: mcasp4_ahclkx_mux@4a009898 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009898 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp4_aux_gfclk_mux: mcasp4_aux_gfclk_mux@4a009898 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <22>; ++ reg = <0x4a009898 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp5_ahclkx_mux: mcasp5_ahclkx_mux@4a009878 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009878 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp5_aux_gfclk_mux: mcasp5_aux_gfclk_mux@4a009878 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <22>; ++ reg = <0x4a009878 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp6_ahclkx_mux: mcasp6_ahclkx_mux@4a009904 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009904 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp6_aux_gfclk_mux: mcasp6_aux_gfclk_mux@4a009904 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <22>; ++ reg = <0x4a009904 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp7_ahclkx_mux: mcasp7_ahclkx_mux@4a009908 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009908 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mcasp7_aux_gfclk_mux: mcasp7_aux_gfclk_mux@4a009908 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <22>; ++ reg = <0x4a009908 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp8_ahclk_mux: mcasp8_ahclk_mux@4a009890 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&abe_sys_clk_div>, <&func_24m_clk>, <&atlclkin3_ck>, <&atl_clkin2_ck>, <&atl_clkin1_ck>, <&atl_clkin0_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&mlb_clk>, <&mlbp_clk>; ++ bit-shift = <22>; ++ reg = <0x4a009890 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp8_aux_gfclk_mux: mcasp8_aux_gfclk_mux@4a009890 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_abe_x1_gfclk2_div>, <&video1_clk2_div>, <&video2_clk2_div>, <&hdmi_clk2_div>; ++ bit-shift = <24>; ++ reg = <0x4a009890 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++mmc1_fclk_mux: mmc1_fclk_mux@4a009328 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009328 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mmc1_fclk_div: mmc1_fclk_div@4a009328 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mmc1_fclk_mux>; ++ bit-shift = <25>; ++ reg = <0x4a009328 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++mmc2_fclk_mux: mmc2_fclk_mux@4a009330 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009330 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mmc2_fclk_div: mmc2_fclk_div@4a009330 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mmc2_fclk_mux>; ++ bit-shift = <25>; ++ reg = <0x4a009330 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++mmc3_gfclk_mux: mmc3_gfclk_mux@4a009820 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009820 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mmc3_gfclk_div: mmc3_gfclk_div@4a009820 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mmc3_gfclk_mux>; ++ bit-shift = <25>; ++ reg = <0x4a009820 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++mmc4_gfclk_mux: mmc4_gfclk_mux@4a009828 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009828 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mmc4_gfclk_div: mmc4_gfclk_div@4a009828 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mmc4_gfclk_mux>; ++ bit-shift = <25>; ++ reg = <0x4a009828 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++qspi_gfclk_mux: qspi_gfclk_mux@4a009838 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_128m_clk>, <&dpll_per_h13x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009838 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++qspi_gfclk_div: qspi_gfclk_div@4a009838 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&qspi_gfclk_mux>; ++ bit-shift = <25>; ++ reg = <0x4a009838 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++timer10_gfclk_mux: timer10_gfclk_mux@4a009728 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009728 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer11_gfclk_mux: timer11_gfclk_mux@4a009730 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009730 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer13_gfclk_mux: timer13_gfclk_mux@4a0097c8 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a0097c8 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer14_gfclk_mux: timer14_gfclk_mux@4a0097d0 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a0097d0 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer15_gfclk_mux: timer15_gfclk_mux@4a0097d8 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a0097d8 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer16_gfclk_mux: timer16_gfclk_mux@4a009830 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009830 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer1_gfclk_mux: timer1_gfclk_mux@4ae07840 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4ae07840 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer2_gfclk_mux: timer2_gfclk_mux@4a009738 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009738 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer3_gfclk_mux: timer3_gfclk_mux@4a009740 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009740 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer4_gfclk_mux: timer4_gfclk_mux@4a009748 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009748 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer5_gfclk_mux: timer5_gfclk_mux@4a005558 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; ++ bit-shift = <24>; ++ reg = <0x4a005558 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer6_gfclk_mux: timer6_gfclk_mux@4a005560 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; ++ bit-shift = <24>; ++ reg = <0x4a005560 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer7_gfclk_mux: timer7_gfclk_mux@4a005568 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; ++ bit-shift = <24>; ++ reg = <0x4a005568 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer8_gfclk_mux: timer8_gfclk_mux@4a005570 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>, <&clkoutmux0_clk_mux>; ++ bit-shift = <24>; ++ reg = <0x4a005570 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++timer9_gfclk_mux: timer9_gfclk_mux@4a009750 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&timer_sys_clk_div>, <&sys_32k_ck>, <&sys_clkin2>, <&ref_clkin0_ck>, <&ref_clkin1_ck>, <&ref_clkin2_ck>, <&ref_clkin3_ck>, <&abe_giclk_div>, <&video1_div_clk>, <&video2_div_clk>, <&hdmi_div_clk>; ++ bit-shift = <24>; ++ reg = <0x4a009750 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++uart10_gfclk_mux: uart10_gfclk_mux@4ae07880 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4ae07880 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart1_gfclk_mux: uart1_gfclk_mux@4a009840 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009840 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart2_gfclk_mux: uart2_gfclk_mux@4a009848 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009848 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart3_gfclk_mux: uart3_gfclk_mux@4a009850 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009850 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart4_gfclk_mux: uart4_gfclk_mux@4a009858 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009858 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart5_gfclk_mux: uart5_gfclk_mux@4a009870 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009870 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart6_gfclk_mux: uart6_gfclk_mux@4a005580 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a005580 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart7_gfclk_mux: uart7_gfclk_mux@4a0098d0 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a0098d0 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart8_gfclk_mux: uart8_gfclk_mux@4a0098e0 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a0098e0 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++uart9_gfclk_mux: uart9_gfclk_mux@4a0098e8 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_48m_fclk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a0098e8 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++vip1_gclk_mux: vip1_gclk_mux@4a009020 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009020 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++vip2_gclk_mux: vip2_gclk_mux@4a009028 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009028 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++vip3_gclk_mux: vip3_gclk_mux@4a009030 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&l3_iclk_div>, <&dpll_core_h23x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009030 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { ++ compatible = "divider-clock"; ++ clocks = <&apll_pcie_ck>; ++ #clock-cells = <0>; ++ reg = <0x4a00821c 0x4>; ++ bit-mask = <0x100>; ++}; ++ ++optfclk_pciephy_clk: optfclk_pciephy_clk@4a0093b0 { ++ compatible = "gate-clock"; ++ clocks = <&apll_pcie_ck>; ++ #clock-cells = <0>; ++ reg = <0x4a0093b0 0x4>; ++ bit-shift = <9>; ++}; ++ ++optfclk_pciephy_div_clk: optfclk_pciephy_div_clk@4a0093b0 { ++ compatible = "gate-clock"; ++ clocks = <&optfclk_pciephy_div>; ++ #clock-cells = <0>; ++ reg = <0x4a0093b0 0x4>; ++ bit-shift = <10>; ++}; +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -186,9 +186,12 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420 + am335x-evmsk.dtb \ + am335x-bone.dtb \ + am335x-boneblack.dtb \ ++ am335x-evm-profile2.dtb \ + am3517-evm.dtb \ + am3517_mt_ventoux.dtb \ +- am43x-epos-evm.dtb ++ am43x-epos-evm.dtb \ ++ am437x-gp-evm.dtb \ ++ dra7-evm.dtb + dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb + dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb + dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \ +--- a/arch/arm/boot/dts/omap2420.dtsi ++++ b/arch/arm/boot/dts/omap2420.dtsi +@@ -114,6 +114,18 @@ + dma-names = "tx", "rx"; + }; + ++ mailbox: mailbox@48094000 { ++ compatible = "ti,omap2-mailbox"; ++ reg = <0x48094000 0x200>; ++ interrupts = <26>, /* DSP Interrupt */ ++ <34>; /* IVA Interrupt */ ++ ti,hwmods = "mailbox"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <6>; ++ ti,mbox-names = "dsp", "iva"; ++ ti,mbox-data = <0 1 0 0>, <2 3 1 3>; ++ }; ++ + timer1: timer@48028000 { + compatible = "ti,omap2420-timer"; + reg = <0x48028000 0x400>; +--- a/arch/arm/boot/dts/omap2430.dtsi ++++ b/arch/arm/boot/dts/omap2430.dtsi +@@ -175,6 +175,17 @@ + dma-names = "tx", "rx"; + }; + ++ mailbox: mailbox@48094000 { ++ compatible = "ti,omap2-mailbox"; ++ reg = <0x48094000 0x200>; ++ interrupts = <26>; ++ ti,hwmods = "mailbox"; ++ ti,mbox-num-users = <4>; ++ ti,mbox-num-fifos = <6>; ++ ti,mbox-names = "dsp"; ++ ti,mbox-data = <0 1 0 0>; ++ }; ++ + timer1: timer@49018000 { + compatible = "ti,omap2420-timer"; + reg = <0x49018000 0x400>; +--- /dev/null ++++ b/arch/arm/boot/dts/omap3430es1-clocks.dtsi +@@ -0,0 +1,158 @@ ++/* ++ * Device Tree Source for OMAP3430 ES1 clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++gfx_l3_ck: gfx_l3_ck@48004b10 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&l3_ick>; ++ reg = <0x48004b10 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++gfx_l3_fck: gfx_l3_fck@48004b40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&l3_ick>; ++ reg = <0x48004b40 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++gfx_l3_ick: gfx_l3_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&gfx_l3_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++gfx_cg1_ck: gfx_cg1_ck@48004b00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&gfx_l3_fck>; ++ reg = <0x48004b00 0x4>; ++ ti,enable-bit = <1>; ++}; ++ ++gfx_cg2_ck: gfx_cg2_ck@48004b00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&gfx_l3_fck>; ++ reg = <0x48004b00 0x4>; ++ ti,enable-bit = <2>; ++}; ++ ++d2d_26m_fck: d2d_26m_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <3>; ++}; ++ ++fshostusb_fck: fshostusb_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <5>; ++}; ++ ++ssi_ssr_div_fck_3430es1: ssi_ssr_div_fck_3430es1@48004a40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&corex2_fck>; ++ bit-shift = <8>; ++ reg = <0x48004a40 0x4>; ++ table = < 1 1 >, < 2 2 >, < 3 3 >, < 4 4 >, < 6 6 >, < 8 8 >; ++ bit-mask = <0xf>; ++}; ++ ++ssi_ssr_fck_3430es1: ssi_ssr_fck_3430es1@48004a00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&ssi_ssr_div_fck_3430es1>; ++ bit-shift = <0>; ++ reg = <0x48004a00 0x4>; ++}; ++ ++ssi_sst_fck_3430es1: ssi_sst_fck_3430es1 { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&ssi_ssr_fck_3430es1>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++hsotgusb_ick: hsotgusb_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-no-wait-interface-clock"; ++ clocks = <&core_l3_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <4>; ++}; ++ ++fac_ick: fac_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <8>; ++}; ++ ++ssi_l4_ick: ssi_l4_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l4_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++ssi_ick_3430es1: ssi_ick_3430es1@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-no-wait-interface-clock"; ++ clocks = <&ssi_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++usb_l4_div_ick: usb_l4_div_ick@48004a40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&l4_ick>; ++ bit-shift = <4>; ++ reg = <0x48004a40 0x4>; ++ bit-mask = <0x3>; ++ index-starts-at-one; ++}; ++ ++usb_l4_ick: usb_l4_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&usb_l4_div_ick>; ++ bit-shift = <5>; ++ reg = <0x48004a10 0x4>; ++}; ++ ++dss1_alwon_fck_3430es1: dss1_alwon_fck_3430es1@48004e00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll4_m4x2_ck>; ++ reg = <0x48004e00 0x4>; ++ bit-shift = <0>; ++}; ++ ++dss_ick_3430es1: dss_ick_3430es1@48004e10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-no-wait-interface-clock"; ++ clocks = <&l4_ick>; ++ reg = <0x48004e10 0x4>; ++ ti,enable-bit = <0>; ++}; +--- a/arch/arm/boot/dts/omap34xx.dtsi ++++ b/arch/arm/boot/dts/omap34xx.dtsi +@@ -25,4 +25,113 @@ + clock-latency = <300000>; /* From legacy driver */ + }; + }; +-}; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "omap34xx-omap36xx-clocks.dtsi" ++ /include/ "omap36xx-omap3430es2plus-clocks.dtsi" ++ /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" ++ }; ++ ++ clockdomains { ++ usbhost_clkdm: usbhost_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&usbhost_48m_fck>, <&usbhost_ick>; ++ }; ++ ++ wkup_clkdm: wkup_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&wdt1_ick>, <&gpt12_ick>, <&gpio1_ick>, ++ <&gpt1_ick>, <&omap_32ksync_ick>, <&wdt2_ick>, ++ <&wdt2_fck>; ++ }; ++ ++ cam_clkdm: cam_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&cam_ick>; ++ }; ++ ++ dpll4_clkdm: dpll4_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll4_ck>; ++ }; ++ ++ sgx_clkdm: sgx_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&sgx_ick>; ++ }; ++ ++ dpll3_clkdm: dpll3_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll3_ck>; ++ }; ++ ++ iva2_clkdm: iva2_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&iva2_ck>; ++ }; ++ ++ dpll1_clkdm: dpll1_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll1_ck>; ++ }; ++ ++ dpll2_clkdm: dpll2_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll2_ck>; ++ }; ++ ++ dpll5_clkdm: dpll5_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll5_ck>; ++ }; ++ ++ dss_clkdm: dss_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>; ++ }; ++ ++ core_l4_clkdm: core_l4_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&mmchs1_ick>, <&mmchs2_ick>, <&hdq_fck>, ++ <&uart1_ick>, <&mcspi4_fck>, <&i2c3_fck>, ++ <&mcspi2_ick>, <&uart2_ick>, <&mcspi3_ick>, ++ <&i2c1_fck>, <&hdq_ick>, <&sha12_ick>, ++ <&mcbsp5_ick>, <&mcspi3_fck>, <&aes2_ick>, ++ <&mcspi1_ick>, <&uart2_fck>, <&mmchs2_fck>, ++ <&mmchs1_fck>, <&i2c3_ick>, <&mcspi1_fck>, ++ <&mcspi4_ick>, <&omapctrl_ick>, <&mcbsp1_ick>, ++ <&mcspi2_fck>, <&gpt10_ick>, <&i2c2_fck>, ++ <&i2c2_ick>, <&gpt11_ick>, <&i2c1_ick>, ++ <&uart1_fck>; ++ }; ++ ++ core_l3_clkdm: core_l3_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&sdrc_ick>; ++ }; ++ ++ per_clkdm: per_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&gpt2_ick>, <&uart3_fck>, <&gpio3_ick>, ++ <&mcbsp2_ick>, <&gpt6_ick>, <&mcbsp4_ick>, ++ <&gpt4_ick>, <&mcbsp3_ick>, <&gpt8_ick>, ++ <&uart3_ick>, <&gpt5_ick>, <&gpt7_ick>, ++ <&gpio2_ick>, <&gpio6_ick>, <&gpt9_ick>, ++ <&gpt3_ick>, <&gpio5_ick>, <&wdt3_ick>, ++ <&gpio4_ick>, <&wdt3_fck>, <&uart4_ick>; ++ }; ++ ++ emu_clkdm: emu_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&emu_src_ck>; ++ }; ++ ++ d2d_clkdm: d2d_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&mad2d_ick>, <&sad2d_ick>, <&modem_fck>; ++ }; ++ }; ++}; +\ No newline at end of file +--- /dev/null ++++ b/arch/arm/boot/dts/omap34xx-omap36xx-clocks.dtsi +@@ -0,0 +1,222 @@ ++/* ++ * Device Tree Source for OMAP34xx/OMAP36xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++security_l4_ick2: security_l4_ick2 { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l4_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++aes1_ick: aes1_ick@48004a14 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&security_l4_ick2>; ++ reg = <0x48004a14 0x4>; ++ ti,enable-bit = <3>; ++}; ++ ++rng_ick: rng_ick@48004a14 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&security_l4_ick2>; ++ reg = <0x48004a14 0x4>; ++ ti,enable-bit = <2>; ++}; ++ ++sha11_ick: sha11_ick@48004a14 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&security_l4_ick2>; ++ reg = <0x48004a14 0x4>; ++ ti,enable-bit = <1>; ++}; ++ ++des1_ick: des1_ick@48004a14 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&security_l4_ick2>; ++ reg = <0x48004a14 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++cam_mclk: cam_mclk@48004f00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll4_m5x2_ck>; ++ bit-shift = <0>; ++ reg = <0x48004f00 0x4>; ++ set-rate-parent; ++}; ++ ++cam_ick: cam_ick@48004f10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-no-wait-interface-clock"; ++ clocks = <&l4_ick>; ++ reg = <0x48004f10 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++csi2_96m_fck: csi2_96m_fck@48004f00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004f00 0x4>; ++ bit-shift = <1>; ++}; ++ ++security_l3_ick: security_l3_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l3_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++pka_ick: pka_ick@48004a14 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&security_l3_ick>; ++ reg = <0x48004a14 0x4>; ++ ti,enable-bit = <4>; ++}; ++ ++icr_ick: icr_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <29>; ++}; ++ ++des2_ick: des2_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <26>; ++}; ++ ++mspro_ick: mspro_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <23>; ++}; ++ ++mailboxes_ick: mailboxes_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <7>; ++}; ++ ++ssi_l4_ick: ssi_l4_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l4_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sr1_fck: sr1_fck@48004c00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x48004c00 0x4>; ++ ti,enable-bit = <6>; ++}; ++ ++sr2_fck: sr2_fck@48004c00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x48004c00 0x4>; ++ ti,enable-bit = <7>; ++}; ++ ++sr_l4_ick: sr_l4_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l4_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll2_fck: dpll2_fck@48004040 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&core_ck>; ++ bit-shift = <19>; ++ reg = <0x48004040 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++dpll2_ck: dpll2_ck@48004004 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dpll-clock"; ++ clocks = <&sys_ck>, <&dpll2_fck>; ++ ti,modes = <0xa2>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++ reg = <0x48004004 0x4>, <0x48004024 0x4>, <0x48004034 0x4>, <0x48004040 0x4>; ++}; ++ ++dpll2_m2_ck: dpll2_m2_ck@48004044 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll2_ck>; ++ reg = <0x48004044 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++iva2_ck: iva2_ck@48004000 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&dpll2_m2_ck>; ++ reg = <0x48004000 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++modem_fck: modem_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <31>; ++}; ++ ++sad2d_ick: sad2d_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&l3_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <3>; ++}; ++ ++mad2d_ick: mad2d_ick@48004a18 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&l3_ick>; ++ reg = <0x48004a18 0x4>; ++ ti,enable-bit = <3>; ++}; ++ ++mspro_fck: mspro_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <23>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/omap36xx-am35xx-omap3430es2plus-clocks.dtsi +@@ -0,0 +1,196 @@ ++/* ++ * Device Tree Source for OMAP36xx/AM35xx/OMAP34xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++dpll5_ck: dpll5_ck@48004d04 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dpll-clock"; ++ clocks = <&sys_ck>, <&sys_ck>; ++ ti,modes = <0x82>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++ reg = <0x48004d04 0x4>, <0x48004d24 0x4>, <0x48004d34 0x4>, <0x48004d4c 0x4>; ++}; ++ ++dpll5_m2_ck: dpll5_m2_ck@48004d50 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll5_ck>; ++ reg = <0x48004d50 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++core_d3_ck: core_d3_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&core_ck>; ++ clock-mult = <1>; ++ clock-div = <3>; ++}; ++ ++core_d4_ck: core_d4_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&core_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++core_d6_ck: core_d6_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&core_ck>; ++ clock-mult = <1>; ++ clock-div = <6>; ++}; ++ ++omap_192m_alwon_fck: omap_192m_alwon_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++core_d2_ck: core_d2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&core_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++corex2_d3_fck: corex2_d3_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&corex2_fck>; ++ clock-mult = <1>; ++ clock-div = <3>; ++}; ++ ++corex2_d5_fck: corex2_d5_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&corex2_fck>; ++ clock-mult = <1>; ++ clock-div = <5>; ++}; ++ ++sgx_mux_fck: sgx_mux_fck@48004b40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&core_d3_ck>, <&core_d4_ck>, <&core_d6_ck>, <&cm_96m_fck>, <&omap_192m_alwon_fck>, <&core_d2_ck>, <&corex2_d3_fck>, <&corex2_d5_fck>; ++ reg = <0x48004b40 0x4>; ++ table = <&core_d3_ck 0>, <&core_d4_ck 1>, <&core_d6_ck 2>, <&cm_96m_fck 3>, <&omap_192m_alwon_fck 4>, <&core_d2_ck 5>, <&corex2_d3_fck 6>, <&corex2_d5_fck 7>; ++ bit-mask = <0x7>; ++}; ++ ++sgx_fck: sgx_fck@48004b00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sgx_mux_fck>; ++ bit-shift = <1>; ++ reg = <0x48004b00 0x4>; ++}; ++ ++sgx_ick: sgx_ick@48004b10 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&l3_ick>; ++ reg = <0x48004b10 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++cpefuse_fck: cpefuse_fck@48004a08 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x48004a08 0x4>; ++ bit-shift = <0>; ++}; ++ ++ts_fck: ts_fck@48004a08 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&omap_32k_fck>; ++ reg = <0x48004a08 0x4>; ++ bit-shift = <1>; ++}; ++ ++usbtll_fck: usbtll_fck@48004a08 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&dpll5_m2_ck>; ++ reg = <0x48004a08 0x4>; ++ ti,enable-bit = <2>; ++}; ++ ++usbtll_ick: usbtll_ick@48004a18 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a18 0x4>; ++ ti,enable-bit = <2>; ++}; ++ ++mmchs3_ick: mmchs3_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <30>; ++}; ++ ++mmchs3_fck: mmchs3_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <30>; ++}; ++ ++dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 { ++ #clock-cells = <0>; ++ compatible = "ti,dss-gate-clock"; ++ clocks = <&dpll4_m4x2_ck>; ++ reg = <0x48004e00 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++dss_ick_3430es2: dss_ick_3430es2@48004e10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dss-interface-clock"; ++ clocks = <&l4_ick>; ++ reg = <0x48004e10 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++usbhost_120m_fck: usbhost_120m_fck@48005400 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll5_m2_ck>; ++ reg = <0x48005400 0x4>; ++ bit-shift = <1>; ++}; ++ ++usbhost_48m_fck: usbhost_48m_fck@48005400 { ++ #clock-cells = <0>; ++ compatible = "ti,dss-gate-clock"; ++ clocks = <&omap_48m_fck>; ++ reg = <0x48005400 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++usbhost_ick: usbhost_ick@48005410 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dss-interface-clock"; ++ clocks = <&l4_ick>; ++ reg = <0x48005410 0x4>; ++ ti,enable-bit = <0>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/omap36xx-clocks.dtsi +@@ -0,0 +1,80 @@ ++/* ++ * Device Tree Source for OMAP36xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++dpll4_ck: dpll4_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dpll-per-j-type-clock"; ++ clocks = <&sys_ck>, <&sys_ck>; ++ ti,modes = <0x82>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++ reg = <0x48004d00 0x4>, <0x48004d20 0x4>, <0x48004d30 0x4>, <0x48004d44 0x4>; ++}; ++ ++dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,hsdiv-gate-clock"; ++ clocks = <&dpll4_m2x2_mul_ck>; ++ reg = <0x48004d00 0x4>; ++ ti,enable-bit = <0x1b>; ++ ti,set-bit-to-disable; ++}; ++ ++dpll3_m3x2_ck: dpll3_m3x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,hsdiv-gate-clock"; ++ clocks = <&dpll3_m3x2_mul_ck>; ++ reg = <0x48004d00 0x4>; ++ ti,enable-bit = <0xc>; ++ ti,set-bit-to-disable; ++}; ++ ++dpll4_m3x2_ck: dpll4_m3x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,hsdiv-gate-clock"; ++ clocks = <&dpll4_m3x2_mul_ck>; ++ reg = <0x48004d00 0x4>; ++ ti,enable-bit = <0x1c>; ++ ti,set-bit-to-disable; ++}; ++ ++dpll4_m5x2_ck: dpll4_m5x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,hsdiv-gate-clock"; ++ clocks = <&dpll4_m5x2_mul_ck>; ++ reg = <0x48004d00 0x4>; ++ ti,enable-bit = <0x1e>; ++ ti,set-rate-parent; ++ ti,set-bit-to-disable; ++}; ++ ++dpll4_m6x2_ck: dpll4_m6x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,hsdiv-gate-clock"; ++ clocks = <&dpll4_m6x2_mul_ck>; ++ reg = <0x48004d00 0x4>; ++ ti,enable-bit = <0x1f>; ++ ti,set-bit-to-disable; ++}; ++ ++omap_192m_alwon_fck: omap_192m_alwon_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++uart4_fck: uart4_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&per_48m_fck>; ++ reg = <0x48005000 0x4>; ++ ti,enable-bit = <18>; ++}; +--- a/arch/arm/boot/dts/omap36xx.dtsi ++++ b/arch/arm/boot/dts/omap36xx.dtsi +@@ -35,4 +35,114 @@ + clock-frequency = <48000000>; + }; + }; +-}; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "omap36xx-clocks.dtsi" ++ /include/ "omap34xx-omap36xx-clocks.dtsi" ++ /include/ "omap36xx-omap3430es2plus-clocks.dtsi" ++ /include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi" ++ }; ++ ++ clockdomains { ++ usbhost_clkdm: usbhost_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&usbhost_48m_fck>, <&usbhost_ick>; ++ }; ++ ++ wkup_clkdm: wkup_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&wdt1_ick>, <&gpt12_ick>, <&gpio1_ick>, ++ <&gpt1_ick>, <&omap_32ksync_ick>, <&wdt2_ick>, ++ <&wdt2_fck>; ++ }; ++ ++ cam_clkdm: cam_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&cam_ick>; ++ }; ++ ++ dpll4_clkdm: dpll4_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll4_ck>; ++ }; ++ ++ sgx_clkdm: sgx_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&sgx_ick>; ++ }; ++ ++ dpll3_clkdm: dpll3_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll3_ck>; ++ }; ++ ++ iva2_clkdm: iva2_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&iva2_ck>; ++ }; ++ ++ dpll1_clkdm: dpll1_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll1_ck>; ++ }; ++ ++ dpll5_clkdm: dpll5_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll5_ck>; ++ }; ++ ++ dpll2_clkdm: dpll2_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll2_ck>; ++ }; ++ ++ dss_clkdm: dss_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>; ++ }; ++ ++ core_l4_clkdm: core_l4_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&mmchs1_ick>, <&mmchs2_ick>, <&hdq_fck>, ++ <&uart1_ick>, <&mcspi4_fck>, <&i2c3_fck>, ++ <&mcspi2_ick>, <&uart2_ick>, <&mcspi3_ick>, ++ <&i2c1_fck>, <&hdq_ick>, <&sha12_ick>, ++ <&mcbsp5_ick>, <&mcspi3_fck>, <&aes2_ick>, ++ <&mcspi1_ick>, <&uart2_fck>, <&mmchs2_fck>, ++ <&mmchs1_fck>, <&i2c3_ick>, <&mcspi1_fck>, ++ <&mcspi4_ick>, <&omapctrl_ick>, <&mcbsp1_ick>, ++ <&mcspi2_fck>, <&gpt10_ick>, <&i2c2_fck>, ++ <&i2c2_ick>, <&gpt11_ick>, <&i2c1_ick>, ++ <&uart1_fck>; ++ }; ++ ++ core_l3_clkdm: core_l3_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&sdrc_ick>; ++ }; ++ ++ per_clkdm: per_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&gpt2_ick>, <&uart3_fck>, <&gpio3_ick>, ++ <&mcbsp2_ick>, <&gpt6_ick>, <&mcbsp4_ick>, ++ <&gpt4_ick>, <&mcbsp3_ick>, <&gpt8_ick>, ++ <&uart3_ick>, <&gpt5_ick>, <&gpt7_ick>, ++ <&gpio2_ick>, <&gpio6_ick>, <&gpt9_ick>, ++ <&gpt3_ick>, <&gpio5_ick>, <&wdt3_ick>, ++ <&gpio4_ick>, <&wdt3_fck>, <&uart4_ick>; ++ }; ++ ++ emu_clkdm: emu_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&emu_src_ck>; ++ }; ++ ++ d2d_clkdm: d2d_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&mad2d_ick>, <&sad2d_ick>, <&modem_fck>; ++ }; ++ }; ++}; +\ No newline at end of file +--- /dev/null ++++ b/arch/arm/boot/dts/omap36xx-omap3430es2plus-clocks.dtsi +@@ -0,0 +1,175 @@ ++/* ++ * Device Tree Source for OMAP34xx/OMAP36xx clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2@48004a40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&corex2_fck>; ++ bit-shift = <8>; ++ reg = <0x48004a40 0x4>; ++ table = < 1 1 >, < 2 2 >, < 3 3 >, < 4 4 >, < 6 6 >, < 8 8 >; ++ bit-mask = <0xf>; ++}; ++ ++ssi_ssr_fck_3430es2: ssi_ssr_fck_3430es2@48004a00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&ssi_ssr_div_fck_3430es2>; ++ bit-shift = <0>; ++ reg = <0x48004a00 0x4>; ++}; ++ ++ssi_sst_fck_3430es2: ssi_sst_fck_3430es2 { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&ssi_ssr_fck_3430es2>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++hsotgusb_ick: hsotgusb_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-hsotgusb-interface-clock"; ++ clocks = <&core_l3_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <4>; ++}; ++ ++ssi_l4_ick: ssi_l4_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l4_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++ssi_ick_3430es2: ssi_ick_3430es2@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-ssi-interface-clock"; ++ clocks = <&ssi_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++dpll5_ck: dpll5_ck@48004d04 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dpll-clock"; ++ clocks = <&sys_ck>, <&sys_ck>; ++ ti,modes = <0x82>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++ reg = <0x48004d04 0x4>, <0x48004d24 0x4>, <0x48004d34 0x4>, <0x48004d4c 0x4>; ++}; ++ ++dpll5_m2_ck: dpll5_m2_ck@48004d50 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll5_ck>; ++ reg = <0x48004d50 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll5_m2_d20_ck: dpll5_m2_d20_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll5_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <20>; ++}; ++ ++sys_d2_ck: sys_d2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++omap_96m_d2_fck: omap_96m_d2_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_96m_fck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++omap_96m_d4_fck: omap_96m_d4_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_96m_fck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++omap_96m_d8_fck: omap_96m_d8_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_96m_fck>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++omap_96m_d10_fck: omap_96m_d10_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_96m_fck>; ++ clock-mult = <1>; ++ clock-div = <10>; ++}; ++ ++dpll5_m2_d4_ck: dpll5_m2_d4_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll5_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++dpll5_m2_d8_ck: dpll5_m2_d8_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll5_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++dpll5_m2_d16_ck: dpll5_m2_d16_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll5_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <16>; ++}; ++ ++usim_mux_fck: usim_mux_fck@48004c40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_ck>, <&dpll5_m2_d20_ck>, <&sys_d2_ck>, <&omap_96m_d2_fck>, <&omap_96m_d4_fck>, <&omap_96m_d8_fck>, <&omap_96m_d10_fck>, <&dpll5_m2_d4_ck>, <&dpll5_m2_d8_ck>, <&dpll5_m2_d16_ck>; ++ bit-shift = <3>; ++ reg = <0x48004c40 0x4>; ++ table = <&sys_ck 1>, <&dpll5_m2_d20_ck 10>, <&sys_d2_ck 2>, <&omap_96m_d2_fck 3>, <&omap_96m_d4_fck 4>, <&omap_96m_d8_fck 5>, <&omap_96m_d10_fck 6>, <&dpll5_m2_d4_ck 7>, <&dpll5_m2_d8_ck 8>, <&dpll5_m2_d16_ck 9>; ++ bit-mask = <0xf>; ++}; ++ ++usim_fck: usim_fck@48004c00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&usim_mux_fck>; ++ bit-shift = <9>; ++ reg = <0x48004c00 0x4>; ++}; ++ ++usim_ick: usim_ick@48004c10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&wkup_l4_ick>; ++ reg = <0x48004c10 0x4>; ++ ti,enable-bit = <9>; ++}; +--- a/arch/arm/boot/dts/omap3-beagle.dts ++++ b/arch/arm/boot/dts/omap3-beagle.dts +@@ -44,17 +44,6 @@ + }; + }; + +- /* HS USB Port 2 RESET */ +- hsusb2_reset: hsusb2_reset_reg { +- compatible = "regulator-fixed"; +- regulator-name = "hsusb2_reset"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- gpio = <&gpio5 19 0>; /* gpio_147 */ +- startup-delay-us = <70000>; +- enable-active-high; +- }; +- + /* HS USB Port 2 Power */ + hsusb2_power: hsusb2_power_reg { + compatible = "regulator-fixed"; +@@ -68,7 +57,7 @@ + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; +- reset-supply = <&hsusb2_reset>; ++ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ + vcc-supply = <&hsusb2_power>; + }; + +@@ -101,18 +90,18 @@ + + hsusbb2_pins: pinmux_hsusbb2_pins { + pinctrl-single,pins = < +- 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_clk */ +- 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_stp */ +- 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dir */ +- 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_nxt */ +- 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat0 */ +- 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat1 */ +- 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat2 */ +- 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat3 */ +- 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat4 */ +- 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat5 */ +- 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat6 */ +- 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* usbb2_ulpitll_clk.usbb1_ulpiphy_dat7 */ ++ 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ ++ 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ ++ 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ ++ 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ ++ 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ ++ 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ ++ 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ ++ 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ ++ 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ ++ 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ ++ 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ ++ 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ + >; + }; + +@@ -180,3 +169,39 @@ + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; + }; ++ ++&usb_otg_hs { ++ interface-type = <0>; ++ usb-phy = <&usb2_phy>; ++ mode = <3>; ++ power = <50>; ++}; ++ ++&dpi { ++ vdds_dsi-supply = <&vpll2>; ++}; ++ ++/ { ++ aliases { ++ display0 = &dvi0; ++ display1 = &tv0; ++ }; ++ ++ tfp410: encoder@0 { ++ compatible = "ti,tfp410"; ++ video-source = <&dpi>; ++ data-lines = <24>; ++ gpios = <&gpio5 10 0>; /* 170, power-down */ ++ }; ++ ++ dvi0: connector@0 { ++ compatible = "ti,dvi_connector"; ++ video-source = <&tfp410>; ++ i2c-bus = <&i2c3>; ++ }; ++ ++ tv0: connector@1 { ++ compatible = "ti,svideo_connector"; ++ video-source = <&venc>; ++ }; ++}; +--- a/arch/arm/boot/dts/omap3-beagle-xm.dts ++++ b/arch/arm/boot/dts/omap3-beagle-xm.dts +@@ -69,6 +69,23 @@ + }; + + }; ++ ++ /* HS USB Port 2 Power */ ++ hsusb2_power: hsusb2_power_reg { ++ compatible = "regulator-fixed"; ++ regulator-name = "hsusb2_vbus"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ ++ startup-delay-us = <70000>; ++ }; ++ ++ /* HS USB Host PHY on PORT 2 */ ++ hsusb2_phy: hsusb2_phy { ++ compatible = "usb-nop-xceiv"; ++ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */ ++ vcc-supply = <&hsusb2_power>; ++ }; + }; + + &omap3_pmx_wkup { +@@ -79,6 +96,37 @@ + }; + }; + ++&omap3_pmx_core { ++ pinctrl-names = "default"; ++ pinctrl-0 = < ++ &hsusbb2_pins ++ >; ++ ++ uart3_pins: pinmux_uart3_pins { ++ pinctrl-single,pins = < ++ 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ ++ 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ ++ >; ++ }; ++ ++ hsusbb2_pins: pinmux_hsusbb2_pins { ++ pinctrl-single,pins = < ++ 0x5c0 (PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */ ++ 0x5c2 (PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */ ++ 0x5c4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */ ++ 0x5c6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */ ++ 0x5c8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */ ++ 0x5cA (PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */ ++ 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */ ++ 0x1a6 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */ ++ 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */ ++ 0x1aa (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */ ++ 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */ ++ 0x1ae (PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */ ++ >; ++ }; ++}; ++ + &i2c1 { + clock-frequency = <2600000>; + +@@ -144,19 +192,12 @@ + &usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; ++ phys = <&usb2_phy>; ++ phy-names = "usb2-phy"; + mode = <3>; + power = <50>; + }; + +-&omap3_pmx_core { +- uart3_pins: pinmux_uart3_pins { +- pinctrl-single,pins = < +- 0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ +- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ +- >; +- }; +-}; +- + &uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +@@ -166,3 +207,11 @@ + pinctrl-names = "default"; + pinctrl-0 = <&gpio1_pins>; + }; ++ ++&usbhshost { ++ port2-mode = "ehci-phy"; ++}; ++ ++&usbhsehci { ++ phys = <0 &hsusb2_phy>; ++}; +--- a/arch/arm/boot/dts/omap3.dtsi ++++ b/arch/arm/boot/dts/omap3.dtsi +@@ -19,6 +19,9 @@ + interrupt-parent = <&intc>; + + aliases { ++ i2c0 = &i2c1; ++ i2c1 = &i2c2; ++ i2c2 = &i2c3; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; +@@ -32,6 +35,11 @@ + compatible = "arm,cortex-a8"; + device_type = "cpu"; + reg = <0x0>; ++ ++ clocks = <&dpll1_ck>; ++ clock-names = "cpu"; ++ ++ clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + }; + +@@ -80,6 +88,8 @@ + compatible = "ti,omap-counter32k"; + reg = <0x48320000 0x20>; + ti,hwmods = "counter_32k"; ++ clocks = <&wkup_32k_fck>; ++ clock-names = "fck"; + }; + + intc: interrupt-controller@48200000 { +@@ -100,6 +110,8 @@ + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <96>; ++ clocks = <&core_l3_ick>; ++ clock-names = "fck"; + }; + + omap3_pmx_core: pinmux@48002030 { +@@ -125,6 +137,8 @@ + reg = <0x48310000 0x200>; + interrupts = <29>; + ti,hwmods = "gpio1"; ++ clocks = <&gpio1_ick>, <&gpio1_dbck>; ++ clock-names = "fck", "dbclk"; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; +@@ -137,6 +151,8 @@ + reg = <0x49050000 0x200>; + interrupts = <30>; + ti,hwmods = "gpio2"; ++ clocks = <&gpio2_ick>, <&gpio2_dbck>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -148,6 +164,8 @@ + reg = <0x49052000 0x200>; + interrupts = <31>; + ti,hwmods = "gpio3"; ++ clocks = <&gpio3_ick>, <&gpio3_dbck>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -159,6 +177,8 @@ + reg = <0x49054000 0x200>; + interrupts = <32>; + ti,hwmods = "gpio4"; ++ clocks = <&gpio4_ick>, <&gpio4_dbck>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -170,6 +190,8 @@ + reg = <0x49056000 0x200>; + interrupts = <33>; + ti,hwmods = "gpio5"; ++ clocks = <&gpio5_ick>, <&gpio5_dbck>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -181,6 +203,8 @@ + reg = <0x49058000 0x200>; + interrupts = <34>; + ti,hwmods = "gpio6"; ++ clocks = <&gpio6_ick>, <&gpio6_dbck>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -190,18 +214,24 @@ + uart1: serial@4806a000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; ++ clocks = <&uart1_fck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; ++ clocks = <&uart2_fck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + }; + + uart3: serial@49020000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; ++ clocks = <&uart3_fck>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + }; + +@@ -210,6 +240,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; ++ clocks = <&i2c1_fck>; ++ clock-names = "fck"; + }; + + i2c2: i2c@48072000 { +@@ -217,6 +249,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; ++ clocks = <&i2c2_fck>; ++ clock-names = "fck"; + }; + + i2c3: i2c@48060000 { +@@ -224,6 +258,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; ++ clocks = <&i2c3_fck>; ++ clock-names = "fck"; + }; + + mcspi1: spi@48098000 { +@@ -231,6 +267,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; ++ clocks = <&mcspi1_fck>; ++ clock-names = "fck"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, +@@ -249,6 +287,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; ++ clocks = <&mcspi2_fck>; ++ clock-names = "fck"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, +@@ -262,6 +302,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; ++ clocks = <&mcspi3_fck>; ++ clock-names = "fck"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, + <&sdma 16>, +@@ -275,6 +317,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; ++ clocks = <&mcspi4_fck>; ++ clock-names = "fck"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; +@@ -283,6 +327,8 @@ + mmc1: mmc@4809c000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc1"; ++ clocks = <&mmchs1_fck>, <&omap_32k_fck>; ++ clock-names = "fck", "dbck"; + ti,dual-volt; + dmas = <&sdma 61>, <&sdma 62>; + dma-names = "tx", "rx"; +@@ -291,6 +337,8 @@ + mmc2: mmc@480b4000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc2"; ++ clocks = <&mmchs2_fck>, <&omap_32k_fck>; ++ clock-names = "fck", "dbck"; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; + }; +@@ -298,6 +346,8 @@ + mmc3: mmc@480ad000 { + compatible = "ti,omap3-hsmmc"; + ti,hwmods = "mmc3"; ++ clocks = <&mmchs3_fck>, <&omap_32k_fck>; ++ clock-names = "fck", "dbck"; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; + }; +@@ -305,6 +355,8 @@ + wdt2: wdt@48314000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; ++ clocks = <&wdt2_fck>; ++ clock-names = "fck"; + }; + + mcbsp1: mcbsp@48074000 { +@@ -317,6 +369,8 @@ + interrupt-names = "common", "tx", "rx"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; ++ clocks = <&mcbsp1_fck>, <&mcbsp_clks>, <&core_96m_fck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; +@@ -366,6 +420,8 @@ + interrupt-names = "common", "tx", "rx"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; ++ clocks = <&mcbsp4_fck>, <&mcbsp_clks>, <&per_96m_fck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; +@@ -381,16 +437,31 @@ + interrupt-names = "common", "tx", "rx"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; ++ clocks = <&mcbsp5_fck>, <&mcbsp_clks>, <&core_96m_fck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 21>, + <&sdma 22>; + dma-names = "tx", "rx"; + }; + ++ mailbox: mailbox@48094000 { ++ compatible = "ti,omap2-mailbox"; ++ reg = <0x48094000 0x200>; ++ interrupts = <26>; ++ ti,hwmods = "mailbox"; ++ ti,mbox-num-users = <2>; ++ ti,mbox-num-fifos = <2>; ++ ti,mbox-names = "dsp"; ++ ti,mbox-data = <0 1 0 0>; ++ }; ++ + timer1: timer@48318000 { + compatible = "ti,omap3430-timer"; + reg = <0x48318000 0x400>; + interrupts = <37>; + ti,hwmods = "timer1"; ++ clocks = <&gpt1_fck>; ++ clock-names = "fck"; + ti,timer-alwon; + }; + +@@ -399,6 +470,8 @@ + reg = <0x49032000 0x400>; + interrupts = <38>; + ti,hwmods = "timer2"; ++ clocks = <&gpt2_fck>; ++ clock-names = "fck"; + }; + + timer3: timer@49034000 { +@@ -406,6 +479,8 @@ + reg = <0x49034000 0x400>; + interrupts = <39>; + ti,hwmods = "timer3"; ++ clocks = <&gpt3_fck>; ++ clock-names = "fck"; + }; + + timer4: timer@49036000 { +@@ -413,6 +488,8 @@ + reg = <0x49036000 0x400>; + interrupts = <40>; + ti,hwmods = "timer4"; ++ clocks = <&gpt4_fck>; ++ clock-names = "fck"; + }; + + timer5: timer@49038000 { +@@ -420,6 +497,8 @@ + reg = <0x49038000 0x400>; + interrupts = <41>; + ti,hwmods = "timer5"; ++ clocks = <&gpt5_fck>; ++ clock-names = "fck"; + ti,timer-dsp; + }; + +@@ -428,6 +507,8 @@ + reg = <0x4903a000 0x400>; + interrupts = <42>; + ti,hwmods = "timer6"; ++ clocks = <&gpt6_fck>; ++ clock-names = "fck"; + ti,timer-dsp; + }; + +@@ -436,6 +517,8 @@ + reg = <0x4903c000 0x400>; + interrupts = <43>; + ti,hwmods = "timer7"; ++ clocks = <&gpt7_fck>; ++ clock-names = "fck"; + ti,timer-dsp; + }; + +@@ -444,6 +527,8 @@ + reg = <0x4903e000 0x400>; + interrupts = <44>; + ti,hwmods = "timer8"; ++ clocks = <&gpt8_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + ti,timer-dsp; + }; +@@ -453,6 +538,8 @@ + reg = <0x49040000 0x400>; + interrupts = <45>; + ti,hwmods = "timer9"; ++ clocks = <&gpt9_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -461,6 +548,8 @@ + reg = <0x48086000 0x400>; + interrupts = <46>; + ti,hwmods = "timer10"; ++ clocks = <&gpt10_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -469,6 +558,8 @@ + reg = <0x48088000 0x400>; + interrupts = <47>; + ti,hwmods = "timer11"; ++ clocks = <&gpt11_fck>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -477,6 +568,8 @@ + reg = <0x48304000 0x400>; + interrupts = <95>; + ti,hwmods = "timer12"; ++ clocks = <&gpt12_fck>; ++ clock-names = "fck"; + ti,timer-alwon; + ti,timer-secure; + }; +@@ -486,12 +579,16 @@ + reg = <0x48062000 0x1000>; + interrupts = <78>; + ti,hwmods = "usb_tll_hs"; ++ clocks = <&usbtll_fck>; ++ clock-names = "fck"; + }; + + usbhshost: usbhshost@48064000 { + compatible = "ti,usbhs-host"; + reg = <0x48064000 0x400>; + ti,hwmods = "usb_host_hs"; ++ clocks = <&usbhost_48m_fck>, <&usbhost_120m_fck>; ++ clock-names = "fck", "ehci_logic_fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -514,6 +611,8 @@ + gpmc: gpmc@6e000000 { + compatible = "ti,omap3430-gpmc"; + ti,hwmods = "gpmc"; ++ clocks = <&gpmc_fck>; ++ clock-names = "fck"; + reg = <0x6e000000 0x02d0>; + interrupts = <20>; + gpmc,num-cs = <8>; +@@ -528,9 +627,61 @@ + interrupts = <92>, <93>; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; ++ clocks = <&hsotgusb_ick>; ++ clock-names = "fck"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; + }; ++ ++ dss@48050000 { ++ compatible = "ti,omap3-dss", "simple-bus"; ++ reg = <0x48050000 0x200>; ++ ti,hwmods = "dss_core"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ dispc@48050400 { ++ compatible = "ti,omap3-dispc"; ++ reg = <0x48050400 0x400>; ++ interrupts = <25>; ++ ti,hwmods = "dss_dispc"; ++ }; ++ ++ dpi: encoder@0 { ++ compatible = "ti,omap3-dpi"; ++ }; ++ ++ sdi: encoder@1 { ++ compatible = "ti,omap3-sdi"; ++ }; ++ ++ dsi: encoder@4804fc00 { ++ compatible = "ti,omap3-dsi"; ++ reg = <0x4804fc00 0x400>; ++ interrupts = <25>; ++ ti,hwmods = "dss_dsi1"; ++ }; ++ ++ rfbi: encoder@48050800 { ++ compatible = "ti,omap3-rfbi"; ++ reg = <0x48050800 0x100>; ++ ti,hwmods = "dss_rfbi"; ++ }; ++ ++ venc: encoder@48050c00 { ++ compatible = "ti,omap3-venc"; ++ reg = <0x48050c00 0x100>; ++ ti,hwmods = "dss_venc"; ++ }; ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "omap3xxx-clocks.dtsi" + }; + }; +--- a/arch/arm/boot/dts/omap3-evm.dts ++++ b/arch/arm/boot/dts/omap3-evm.dts +@@ -70,6 +70,8 @@ + &usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; ++ phys = <&usb2_phy>; ++ phy-names = "usb2-phy"; + mode = <3>; + power = <50>; + }; +--- a/arch/arm/boot/dts/omap3-overo.dtsi ++++ b/arch/arm/boot/dts/omap3-overo.dtsi +@@ -76,6 +76,8 @@ + &usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; ++ phys = <&usb2_phy>; ++ phy-names = "usb2-phy"; + mode = <3>; + power = <50>; + }; +--- a/arch/arm/boot/dts/omap3-tobi.dts ++++ b/arch/arm/boot/dts/omap3-tobi.dts +@@ -81,3 +81,36 @@ + &mmc3 { + status = "disabled"; + }; ++ ++&dpi { ++ vdds_dsi-supply = <&vpll2>; ++}; ++ ++/ { ++ aliases { ++ display0 = &lcd0; ++ }; ++ ++ lcd0: display@0 { ++ compatible = "samsung,lte430wq-f0c", "panel-dpi"; ++ video-source = <&dpi>; ++ data-lines = <24>; ++ ++ panel-timing { ++ clock-frequency = <9200000>; ++ hactive = <480>; ++ vactive = <272>; ++ hfront-porch = <8>; ++ hback-porch = <4>; ++ hsync-len = <41>; ++ vback-porch = <2>; ++ vfront-porch = <4>; ++ vsync-len = <10>; ++ ++ hsync-active = <0>; ++ vsync-active = <0>; ++ de-active = <1>; ++ pixelclk-active = <1>; ++ }; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/omap3xxx-clocks.dtsi +@@ -0,0 +1,1513 @@ ++/* ++ * Device Tree Source for OMAP3 clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++dummy_apb_pclk: dummy_apb_pclk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0x0>; ++}; ++ ++omap_32k_fck: omap_32k_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++virt_12m_ck: virt_12m_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++virt_13m_ck: virt_13m_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <13000000>; ++}; ++ ++virt_19200000_ck: virt_19200000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <19200000>; ++}; ++ ++virt_26000000_ck: virt_26000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <26000000>; ++}; ++ ++virt_38_4m_ck: virt_38_4m_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <38400000>; ++}; ++ ++virt_16_8m_ck: virt_16_8m_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <16800000>; ++}; ++ ++osc_sys_ck: osc_sys_ck@48306d40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&virt_12m_ck>, <&virt_13m_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_38_4m_ck>, <&virt_16_8m_ck>; ++ reg = <0x48306d40 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++sys_ck: sys_ck@48307270 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&osc_sys_ck>; ++ bit-shift = <6>; ++ reg = <0x48307270 0x4>; ++ bit-mask = <0x3>; ++ index-starts-at-one; ++}; ++ ++dpll4_ck: dpll4_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dpll-per-clock"; ++ clocks = <&sys_ck>, <&sys_ck>; ++ ti,modes = <0x82>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++ reg = <0x48004d00 0x4>, <0x48004d20 0x4>, <0x48004d30 0x4>, <0x48004d44 0x4>; ++}; ++ ++dpll4_m2_ck: dpll4_m2_ck@48004d48 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll4_ck>; ++ reg = <0x48004d48 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++}; ++ ++dpll4_m2x2_mul_ck: dpll4_m2x2_mul_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m2_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll4_m2x2_mul_ck>; ++ bit-shift = <0x1b>; ++ reg = <0x48004d00 0x4>; ++ set-bit-to-disable; ++}; ++ ++omap_96m_alwon_fck: omap_96m_alwon_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll3_ck: dpll3_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dpll-core-clock"; ++ clocks = <&sys_ck>, <&sys_ck>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++ reg = <0x48004d00 0x4>, <0x48004d20 0x4>, <0x48004d30 0x4>, <0x48004d40 0x4>; ++}; ++ ++dpll3_m3_ck: dpll3_m3_ck@48005140 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll3_ck>; ++ bit-shift = <16>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll3_m3x2_mul_ck: dpll3_m3x2_mul_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll3_m3_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll3_m3x2_ck: dpll3_m3x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll3_m3x2_mul_ck>; ++ bit-shift = <0xc>; ++ reg = <0x48004d00 0x4>; ++ set-bit-to-disable; ++}; ++ ++emu_core_alwon_ck: emu_core_alwon_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll3_m3x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sys_altclk: sys_altclk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0x0>; ++}; ++ ++mcbsp_clks: mcbsp_clks { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0x0>; ++}; ++ ++sys_clkout1: sys_clkout1@48306d70 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&osc_sys_ck>; ++ reg = <0x48306d70 0x4>; ++ bit-shift = <7>; ++}; ++ ++dpll3_m2_ck: dpll3_m2_ck@48004d40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll3_ck>; ++ bit-shift = <27>; ++ reg = <0x48004d40 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++core_ck: core_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll3_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll1_fck: dpll1_fck@48004940 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&core_ck>; ++ bit-shift = <19>; ++ reg = <0x48004940 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++dpll1_ck: dpll1_ck@48004904 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-dpll-clock"; ++ clocks = <&sys_ck>, <&dpll1_fck>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++ reg = <0x48004904 0x4>, <0x48004924 0x4>, <0x48004934 0x4>, <0x48004940 0x4>; ++}; ++ ++dpll1_x2_ck: dpll1_x2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll1_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll1_x2m2_ck: dpll1_x2m2_ck@48004944 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll1_x2_ck>; ++ reg = <0x48004944 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll3_x2_ck: dpll3_x2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll3_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll3_m2x2_ck: dpll3_m2x2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll3_m2_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll4_x2_ck: dpll4_x2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++cm_96m_fck: cm_96m_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_96m_alwon_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++omap_96m_fck: omap_96m_fck@48004d40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&cm_96m_fck>, <&sys_ck>; ++ bit-shift = <6>; ++ reg = <0x48004d40 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll4_m3_ck: dpll4_m3_ck@48004e40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll4_ck>; ++ bit-shift = <8>; ++ reg = <0x48004e40 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++}; ++ ++dpll4_m3x2_mul_ck: dpll4_m3x2_mul_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m3_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll4_m3x2_ck: dpll4_m3x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll4_m3x2_mul_ck>; ++ bit-shift = <0x1c>; ++ reg = <0x48004d00 0x4>; ++ set-bit-to-disable; ++}; ++ ++omap_54m_fck: omap_54m_fck@48004d40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll4_m3x2_ck>, <&sys_altclk>; ++ bit-shift = <5>; ++ reg = <0x48004d40 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++cm_96m_d2_fck: cm_96m_d2_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&cm_96m_fck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++omap_48m_fck: omap_48m_fck@48004d40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&cm_96m_d2_fck>, <&sys_altclk>; ++ bit-shift = <3>; ++ reg = <0x48004d40 0x4>; ++ table = <&cm_96m_d2_fck 0>, <&sys_altclk 1>; ++ bit-mask = <0x1>; ++}; ++ ++omap_12m_fck: omap_12m_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_48m_fck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++dpll4_m4_ck: dpll4_m4_ck@48004e40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll4_ck>; ++ reg = <0x48004e40 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++}; ++ ++dpll4_m4x2_mul_ck: dpll4_m4x2_mul_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m4_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll4_m4x2_ck: dpll4_m4x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll4_m4x2_mul_ck>; ++ bit-shift = <0x1d>; ++ reg = <0x48004d00 0x4>; ++ set-bit-to-disable; ++}; ++ ++dpll4_m5_ck: dpll4_m5_ck@48004f40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll4_ck>; ++ reg = <0x48004f40 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++}; ++ ++dpll4_m5x2_mul_ck: dpll4_m5x2_mul_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m5_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll4_m5x2_ck: dpll4_m5x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll4_m5x2_mul_ck>; ++ bit-shift = <0x1e>; ++ reg = <0x48004d00 0x4>; ++ set-bit-to-disable; ++}; ++ ++dpll4_m6_ck: dpll4_m6_ck@48005140 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll4_ck>; ++ bit-shift = <24>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++}; ++ ++dpll4_m6x2_mul_ck: dpll4_m6x2_mul_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m6_ck>; ++ clock-mult = <2>; ++ clock-div = <1>; ++}; ++ ++dpll4_m6x2_ck: dpll4_m6x2_ck@48004d00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll4_m6x2_mul_ck>; ++ bit-shift = <0x1f>; ++ reg = <0x48004d00 0x4>; ++ set-bit-to-disable; ++}; ++ ++emu_per_alwon_ck: emu_per_alwon_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll4_m6x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++clkout2_src_mux_ck: clkout2_src_mux_ck@48004d70 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&core_ck>, <&sys_ck>, <&cm_96m_fck>, <&omap_54m_fck>; ++ reg = <0x48004d70 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++clkout2_src_ck: clkout2_src_ck@48004d70 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&clkout2_src_mux_ck>; ++ bit-shift = <7>; ++ reg = <0x48004d70 0x4>; ++}; ++ ++sys_clkout2: sys_clkout2@48004d70 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&clkout2_src_ck>; ++ bit-shift = <3>; ++ reg = <0x48004d70 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++corex2_fck: corex2_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll3_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mpu_ck: mpu_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll1_x2m2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++arm_fck: arm_fck@48004924 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mpu_ck>; ++ reg = <0x48004924 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++emu_mpu_alwon_ck: emu_mpu_alwon_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&mpu_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l3_ick: l3_ick@48004a40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&core_ck>; ++ reg = <0x48004a40 0x4>; ++ bit-mask = <0x3>; ++ index-starts-at-one; ++}; ++ ++l4_ick: l4_ick@48004a40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&l3_ick>; ++ bit-shift = <2>; ++ reg = <0x48004a40 0x4>; ++ bit-mask = <0x3>; ++ index-starts-at-one; ++}; ++ ++rm_ick: rm_ick@48004c40 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&l4_ick>; ++ bit-shift = <1>; ++ reg = <0x48004c40 0x4>; ++ bit-mask = <0x3>; ++ index-starts-at-one; ++}; ++ ++gpt10_mux_fck: gpt10_mux_fck@48004a40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <6>; ++ reg = <0x48004a40 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt10_fck: gpt10_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt10_mux_fck>; ++ bit-shift = <11>; ++ reg = <0x48004a00 0x4>; ++}; ++ ++gpt11_mux_fck: gpt11_mux_fck@48004a40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <7>; ++ reg = <0x48004a40 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt11_fck: gpt11_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt11_mux_fck>; ++ bit-shift = <12>; ++ reg = <0x48004a00 0x4>; ++}; ++ ++core_96m_fck: core_96m_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_96m_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mmchs2_fck: mmchs2_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <25>; ++}; ++ ++mmchs1_fck: mmchs1_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <24>; ++}; ++ ++i2c3_fck: i2c3_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <17>; ++}; ++ ++i2c2_fck: i2c2_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <16>; ++}; ++ ++i2c1_fck: i2c1_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_96m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <15>; ++}; ++ ++mcbsp5_mux_fck: mcbsp5_mux_fck@480022d8 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&core_96m_fck>, <&mcbsp_clks>; ++ bit-shift = <4>; ++ reg = <0x480022d8 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcbsp5_fck: mcbsp5_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&mcbsp5_mux_fck>; ++ bit-shift = <10>; ++ reg = <0x48004a00 0x4>; ++}; ++ ++mcbsp1_mux_fck: mcbsp1_mux_fck@48002274 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&core_96m_fck>, <&mcbsp_clks>; ++ bit-shift = <2>; ++ reg = <0x48002274 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcbsp1_fck: mcbsp1_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&mcbsp1_mux_fck>; ++ bit-shift = <9>; ++ reg = <0x48004a00 0x4>; ++}; ++ ++core_48m_fck: core_48m_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_48m_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mcspi4_fck: mcspi4_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <21>; ++}; ++ ++mcspi3_fck: mcspi3_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <20>; ++}; ++ ++mcspi2_fck: mcspi2_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <19>; ++}; ++ ++mcspi1_fck: mcspi1_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <18>; ++}; ++ ++uart2_fck: uart2_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <14>; ++}; ++ ++uart1_fck: uart1_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_48m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <13>; ++}; ++ ++core_12m_fck: core_12m_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_12m_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++hdq_fck: hdq_fck@48004a00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_12m_fck>; ++ reg = <0x48004a00 0x4>; ++ ti,enable-bit = <22>; ++}; ++ ++core_l3_ick: core_l3_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l3_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++sdrc_ick: sdrc_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&core_l3_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <1>; ++}; ++ ++gpmc_fck: gpmc_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&core_l3_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++core_l4_ick: core_l4_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l4_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++mmchs2_ick: mmchs2_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <25>; ++}; ++ ++mmchs1_ick: mmchs1_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <24>; ++}; ++ ++hdq_ick: hdq_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <22>; ++}; ++ ++mcspi4_ick: mcspi4_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <21>; ++}; ++ ++mcspi3_ick: mcspi3_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <20>; ++}; ++ ++mcspi2_ick: mcspi2_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <19>; ++}; ++ ++mcspi1_ick: mcspi1_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <18>; ++}; ++ ++i2c3_ick: i2c3_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <17>; ++}; ++ ++i2c2_ick: i2c2_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <16>; ++}; ++ ++i2c1_ick: i2c1_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <15>; ++}; ++ ++uart2_ick: uart2_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <14>; ++}; ++ ++uart1_ick: uart1_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <13>; ++}; ++ ++gpt11_ick: gpt11_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <12>; ++}; ++ ++gpt10_ick: gpt10_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <11>; ++}; ++ ++mcbsp5_ick: mcbsp5_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <10>; ++}; ++ ++mcbsp1_ick: mcbsp1_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <9>; ++}; ++ ++omapctrl_ick: omapctrl_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <6>; ++}; ++ ++dss_tv_fck: dss_tv_fck@48004e00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&omap_54m_fck>; ++ reg = <0x48004e00 0x4>; ++ bit-shift = <2>; ++}; ++ ++dss_96m_fck: dss_96m_fck@48004e00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&omap_96m_fck>; ++ reg = <0x48004e00 0x4>; ++ bit-shift = <2>; ++}; ++ ++dss2_alwon_fck: dss2_alwon_fck@48004e00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_ck>; ++ reg = <0x48004e00 0x4>; ++ bit-shift = <1>; ++}; ++ ++gpt1_mux_fck: gpt1_mux_fck@48004c40 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ reg = <0x48004c40 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt1_fck: gpt1_fck@48004c00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt1_mux_fck>; ++ bit-shift = <0>; ++ reg = <0x48004c00 0x4>; ++}; ++ ++aes2_ick: aes2_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <28>; ++}; ++ ++wkup_32k_fck: wkup_32k_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_32k_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++gpio1_dbck: gpio1_dbck@48004c00 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&wkup_32k_fck>; ++ reg = <0x48004c00 0x4>; ++ bit-shift = <3>; ++}; ++ ++sha12_ick: sha12_ick@48004a10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&core_l4_ick>; ++ reg = <0x48004a10 0x4>; ++ ti,enable-bit = <27>; ++}; ++ ++wdt2_fck: wdt2_fck@48004c00 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&wkup_32k_fck>; ++ reg = <0x48004c00 0x4>; ++ ti,enable-bit = <5>; ++}; ++ ++wkup_l4_ick: wkup_l4_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++wdt2_ick: wdt2_ick@48004c10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&wkup_l4_ick>; ++ reg = <0x48004c10 0x4>; ++ ti,enable-bit = <5>; ++}; ++ ++wdt1_ick: wdt1_ick@48004c10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&wkup_l4_ick>; ++ reg = <0x48004c10 0x4>; ++ ti,enable-bit = <4>; ++}; ++ ++gpio1_ick: gpio1_ick@48004c10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&wkup_l4_ick>; ++ reg = <0x48004c10 0x4>; ++ ti,enable-bit = <3>; ++}; ++ ++omap_32ksync_ick: omap_32ksync_ick@48004c10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&wkup_l4_ick>; ++ reg = <0x48004c10 0x4>; ++ ti,enable-bit = <2>; ++}; ++ ++gpt12_ick: gpt12_ick@48004c10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&wkup_l4_ick>; ++ reg = <0x48004c10 0x4>; ++ ti,enable-bit = <1>; ++}; ++ ++gpt1_ick: gpt1_ick@48004c10 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&wkup_l4_ick>; ++ reg = <0x48004c10 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++per_96m_fck: per_96m_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_96m_alwon_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++per_48m_fck: per_48m_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_48m_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++uart3_fck: uart3_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&per_48m_fck>; ++ reg = <0x48005000 0x4>; ++ ti,enable-bit = <11>; ++}; ++ ++gpt2_mux_fck: gpt2_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt2_fck: gpt2_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt2_mux_fck>; ++ bit-shift = <3>; ++ reg = <0x48005000 0x4>; ++}; ++ ++gpt3_mux_fck: gpt3_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <1>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt3_fck: gpt3_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt3_mux_fck>; ++ bit-shift = <4>; ++ reg = <0x48005000 0x4>; ++}; ++ ++gpt4_mux_fck: gpt4_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <2>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt4_fck: gpt4_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt4_mux_fck>; ++ bit-shift = <5>; ++ reg = <0x48005000 0x4>; ++}; ++ ++gpt5_mux_fck: gpt5_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <3>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt5_fck: gpt5_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt5_mux_fck>; ++ bit-shift = <6>; ++ reg = <0x48005000 0x4>; ++}; ++ ++gpt6_mux_fck: gpt6_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <4>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt6_fck: gpt6_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt6_mux_fck>; ++ bit-shift = <7>; ++ reg = <0x48005000 0x4>; ++}; ++ ++gpt7_mux_fck: gpt7_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <5>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt7_fck: gpt7_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt7_mux_fck>; ++ bit-shift = <8>; ++ reg = <0x48005000 0x4>; ++}; ++ ++gpt8_mux_fck: gpt8_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <6>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt8_fck: gpt8_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt8_mux_fck>; ++ bit-shift = <9>; ++ reg = <0x48005000 0x4>; ++}; ++ ++gpt9_mux_fck: gpt9_mux_fck@48005040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&omap_32k_fck>, <&sys_ck>; ++ bit-shift = <7>; ++ reg = <0x48005040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpt9_fck: gpt9_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&gpt9_mux_fck>; ++ bit-shift = <10>; ++ reg = <0x48005000 0x4>; ++}; ++ ++per_32k_alwon_fck: per_32k_alwon_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&omap_32k_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++gpio6_dbck: gpio6_dbck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&per_32k_alwon_fck>; ++ reg = <0x48005000 0x4>; ++ bit-shift = <17>; ++}; ++ ++gpio5_dbck: gpio5_dbck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&per_32k_alwon_fck>; ++ reg = <0x48005000 0x4>; ++ bit-shift = <16>; ++}; ++ ++gpio4_dbck: gpio4_dbck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&per_32k_alwon_fck>; ++ reg = <0x48005000 0x4>; ++ bit-shift = <15>; ++}; ++ ++gpio3_dbck: gpio3_dbck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&per_32k_alwon_fck>; ++ reg = <0x48005000 0x4>; ++ bit-shift = <14>; ++}; ++ ++gpio2_dbck: gpio2_dbck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&per_32k_alwon_fck>; ++ reg = <0x48005000 0x4>; ++ bit-shift = <13>; ++}; ++ ++wdt3_fck: wdt3_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "ti,gate-clock"; ++ clocks = <&per_32k_alwon_fck>; ++ reg = <0x48005000 0x4>; ++ ti,enable-bit = <12>; ++}; ++ ++per_l4_ick: per_l4_ick { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l4_ick>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++gpio6_ick: gpio6_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <17>; ++}; ++ ++gpio5_ick: gpio5_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <16>; ++}; ++ ++gpio4_ick: gpio4_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <15>; ++}; ++ ++gpio3_ick: gpio3_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <14>; ++}; ++ ++gpio2_ick: gpio2_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <13>; ++}; ++ ++wdt3_ick: wdt3_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <12>; ++}; ++ ++uart3_ick: uart3_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <11>; ++}; ++ ++uart4_ick: uart4_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <18>; ++}; ++ ++gpt9_ick: gpt9_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <10>; ++}; ++ ++gpt8_ick: gpt8_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <9>; ++}; ++ ++gpt7_ick: gpt7_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <8>; ++}; ++ ++gpt6_ick: gpt6_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <7>; ++}; ++ ++gpt5_ick: gpt5_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <6>; ++}; ++ ++gpt4_ick: gpt4_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <5>; ++}; ++ ++gpt3_ick: gpt3_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <4>; ++}; ++ ++gpt2_ick: gpt2_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <3>; ++}; ++ ++mcbsp2_ick: mcbsp2_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <0>; ++}; ++ ++mcbsp3_ick: mcbsp3_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <1>; ++}; ++ ++mcbsp4_ick: mcbsp4_ick@48005010 { ++ #clock-cells = <0>; ++ compatible = "ti,omap3-interface-clock"; ++ clocks = <&per_l4_ick>; ++ reg = <0x48005010 0x4>; ++ ti,enable-bit = <2>; ++}; ++ ++mcbsp2_mux_fck: mcbsp2_mux_fck@48002274 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_96m_fck>, <&mcbsp_clks>; ++ bit-shift = <6>; ++ reg = <0x48002274 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcbsp2_fck: mcbsp2_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&mcbsp2_mux_fck>; ++ bit-shift = <0>; ++ reg = <0x48005000 0x4>; ++}; ++ ++mcbsp3_mux_fck: mcbsp3_mux_fck@480022d8 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_96m_fck>, <&mcbsp_clks>; ++ reg = <0x480022d8 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcbsp3_fck: mcbsp3_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&mcbsp3_mux_fck>; ++ bit-shift = <1>; ++ reg = <0x48005000 0x4>; ++}; ++ ++mcbsp4_mux_fck: mcbsp4_mux_fck@480022d8 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&per_96m_fck>, <&mcbsp_clks>; ++ bit-shift = <2>; ++ reg = <0x480022d8 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcbsp4_fck: mcbsp4_fck@48005000 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&mcbsp4_mux_fck>; ++ bit-shift = <2>; ++ reg = <0x48005000 0x4>; ++}; ++ ++emu_src_mux_ck: emu_src_mux_ck@48005140 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++emu_src_ck: emu_src_ck { ++ #clock-cells = <0>; ++ compatible = "ti,clkdm-gate-clock"; ++ clocks = <&emu_src_mux_ck>; ++}; ++ ++pclk_fck: pclk_fck@48005140 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&emu_src_ck>; ++ bit-shift = <8>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++pclkx2_fck: pclkx2_fck@48005140 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&emu_src_ck>; ++ bit-shift = <6>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x3>; ++ index-starts-at-one; ++}; ++ ++atclk_fck: atclk_fck@48005140 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&emu_src_ck>; ++ bit-shift = <4>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x3>; ++ index-starts-at-one; ++}; ++ ++traceclk_src_fck: traceclk_src_fck@48005140 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_ck>, <&emu_core_alwon_ck>, <&emu_per_alwon_ck>, <&emu_mpu_alwon_ck>; ++ bit-shift = <2>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++traceclk_fck: traceclk_fck@48005140 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&traceclk_src_fck>; ++ bit-shift = <11>; ++ reg = <0x48005140 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++secure_32k_fck: secure_32k_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++gpt12_fck: gpt12_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&secure_32k_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++wdt1_fck: wdt1_fck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&secure_32k_fck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/omap443x-clocks.dtsi +@@ -0,0 +1,17 @@ ++/* ++ * Device Tree Source for OMAP443x clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++bandgap_fclk: bandgap_fclk@4a307888 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a307888 0x4>; ++}; +--- a/arch/arm/boot/dts/omap443x.dtsi ++++ b/arch/arm/boot/dts/omap443x.dtsi +@@ -30,4 +30,24 @@ + 0x4a00232C 0x4>; + compatible = "ti,omap4430-bandgap"; + }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "omap44xx-clocks.dtsi" ++ /include/ "omap443x-clocks.dtsi" ++ }; ++ ++ clockdomains { ++ l3_init_clkdm: l3_init_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll_usb_ck>; ++ }; ++ ++ emu_sys_clkdm: emu_sys_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&trace_clk_div_ck>; ++ }; ++ }; + }; +--- a/arch/arm/boot/dts/omap4460.dtsi ++++ b/arch/arm/boot/dts/omap4460.dtsi +@@ -38,4 +38,24 @@ + interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ + gpios = <&gpio3 22 0>; /* tshut */ + }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "omap44xx-clocks.dtsi" ++ /include/ "omap446x-clocks.dtsi" ++ }; ++ ++ clockdomains { ++ l3_init_clkdm: l3_init_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll_usb_ck>; ++ }; ++ ++ emu_sys_clkdm: emu_sys_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&trace_clk_div_ck>; ++ }; ++ }; + }; +--- /dev/null ++++ b/arch/arm/boot/dts/omap446x-clocks.dtsi +@@ -0,0 +1,27 @@ ++/* ++ * Device Tree Source for OMAP446x clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++div_ts_ck: div_ts_ck@4a307888 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&l4_wkup_clk_mux_ck>; ++ bit-shift = <24>; ++ reg = <0x4a307888 0x4>; ++ table = < 8 0 >, < 16 1 >, < 32 2 >; ++ bit-mask = <0x3>; ++}; ++ ++bandgap_ts_fclk: bandgap_ts_fclk@4a307888 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&div_ts_ck>; ++ bit-shift = <8>; ++ reg = <0x4a307888 0x4>; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/omap44xx-clocks.dtsi +@@ -0,0 +1,1639 @@ ++/* ++ * Device Tree Source for OMAP4 clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++extalt_clkin_ck: extalt_clkin_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <59000000>; ++}; ++ ++pad_clks_src_ck: pad_clks_src_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++pad_clks_ck: pad_clks_ck@4a004108 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&pad_clks_src_ck>; ++ bit-shift = <8>; ++ reg = <0x4a004108 0x4>; ++}; ++ ++pad_slimbus_core_clks_ck: pad_slimbus_core_clks_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++secure_32k_clk_src_ck: secure_32k_clk_src_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++slimbus_src_clk: slimbus_src_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++slimbus_clk: slimbus_clk@4a004108 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&slimbus_src_clk>; ++ bit-shift = <10>; ++ reg = <0x4a004108 0x4>; ++}; ++ ++sys_32k_ck: sys_32k_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++virt_12000000_ck: virt_12000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++virt_13000000_ck: virt_13000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <13000000>; ++}; ++ ++virt_16800000_ck: virt_16800000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <16800000>; ++}; ++ ++virt_19200000_ck: virt_19200000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <19200000>; ++}; ++ ++virt_26000000_ck: virt_26000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <26000000>; ++}; ++ ++virt_27000000_ck: virt_27000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <27000000>; ++}; ++ ++virt_38400000_ck: virt_38400000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <38400000>; ++}; ++ ++sys_clkin_ck: sys_clkin_ck@4a306110 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; ++ reg = <0x4a306110 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++tie_low_clock_ck: tie_low_clock_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <0>; ++}; ++ ++utmi_phy_clkout_ck: utmi_phy_clkout_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <60000000>; ++}; ++ ++xclk60mhsp1_ck: xclk60mhsp1_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <60000000>; ++}; ++ ++xclk60mhsp2_ck: xclk60mhsp2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <60000000>; ++}; ++ ++xclk60motg_ck: xclk60motg_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <60000000>; ++}; ++ ++abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a306108 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++abe_dpll_refclk_mux_ck: abe_dpll_refclk_mux_ck@4a30610c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ reg = <0x4a30610c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll_abe_ck: dpll_abe_ck@4a0041e0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-m4xen-clock"; ++ clocks = <&abe_dpll_refclk_mux_ck>, <&abe_dpll_bypass_clk_mux_ck>; ++ reg = <0x4a0041e0 0x4>, <0x4a0041e4 0x4>, <0x4a0041e8 0x4>, <0x4a0041ec 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_abe_x2_ck: dpll_abe_x2_ck@4a0041f0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_abe_ck>; ++ reg = <0x4a0041f0 0x4>; ++}; ++ ++dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@4a0041f0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_abe_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041f0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++abe_24m_fclk: abe_24m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++abe_clk: abe_clk@4a004108 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ reg = <0x4a004108 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++aess_fclk: aess_fclk@4a004528 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&abe_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004528 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@4a0041f4 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_abe_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041f4 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++core_hsd_byp_clk_mux_ck: core_hsd_byp_clk_mux_ck@4a00412c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_abe_m3x2_ck>; ++ bit-shift = <23>; ++ reg = <0x4a00412c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll_core_ck: dpll_core_ck@4a004120 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-core-clock"; ++ clocks = <&sys_clkin_ck>, <&core_hsd_byp_clk_mux_ck>; ++ reg = <0x4a004120 0x4>, <0x4a004124 0x4>, <0x4a004128 0x4>, <0x4a00412c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_core_x2_ck: dpll_core_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_core_ck>; ++}; ++ ++dpll_core_m6x2_ck: dpll_core_m6x2_ck@4a004140 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004140 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dbgclk_mux_ck: dbgclk_mux_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_core_m2_ck: dpll_core_m2_ck@4a004130 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004130 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++ddrphy_ck: ddrphy_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++dpll_core_m5x2_ck: dpll_core_m5x2_ck@4a00413c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00413c 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++div_core_ck: div_core_ck@4a004100 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_core_m5x2_ck>; ++ reg = <0x4a004100 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++div_iva_hs_clk: div_iva_hs_clk@4a0041dc { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_core_m5x2_ck>; ++ reg = <0x4a0041dc 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++div_mpu_hs_clk: div_mpu_hs_clk@4a00419c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_core_m5x2_ck>; ++ reg = <0x4a00419c 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++dpll_core_m4x2_ck: dpll_core_m4x2_ck@4a004138 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004138 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dll_clk_div_ck: dll_clk_div_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_m4x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++dpll_abe_m2_ck: dpll_abe_m2_ck@4a0041f0 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_ck>; ++ reg = <0x4a0041f0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck@4a004134 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ reg = <0x4a004134 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_core_m3x2_ck: dpll_core_m3x2_ck@4a004134 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_core_m3x2_div_ck>; ++ bit-shift = <8>; ++ reg = <0x4a004134 0x4>; ++}; ++ ++dpll_core_m7x2_ck: dpll_core_m7x2_ck@4a004144 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004144 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++iva_hsd_byp_clk_mux_ck: iva_hsd_byp_clk_mux_ck@4a0041ac { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&div_iva_hs_clk>; ++ bit-shift = <23>; ++ reg = <0x4a0041ac 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll_iva_ck: dpll_iva_ck@4a0041a0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&iva_hsd_byp_clk_mux_ck>; ++ reg = <0x4a0041a0 0x4>, <0x4a0041a4 0x4>, <0x4a0041a8 0x4>, <0x4a0041ac 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_iva_x2_ck: dpll_iva_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_iva_ck>; ++}; ++ ++dpll_iva_m4x2_ck: dpll_iva_m4x2_ck@4a0041b8 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_iva_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041b8 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_iva_m5x2_ck: dpll_iva_m5x2_ck@4a0041bc { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_iva_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041bc 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_mpu_ck: dpll_mpu_ck@4a004160 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&div_mpu_hs_clk>; ++ reg = <0x4a004160 0x4>, <0x4a004164 0x4>, <0x4a004168 0x4>, <0x4a00416c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a004170 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_mpu_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004170 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++per_hs_clk_div_ck: per_hs_clk_div_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m3x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++per_hsd_byp_clk_mux_ck: per_hsd_byp_clk_mux_ck@4a00814c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&per_hs_clk_div_ck>; ++ bit-shift = <23>; ++ reg = <0x4a00814c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll_per_ck: dpll_per_ck@4a008140 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin_ck>, <&per_hsd_byp_clk_mux_ck>; ++ reg = <0x4a008140 0x4>, <0x4a008144 0x4>, <0x4a008148 0x4>, <0x4a00814c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_per_m2_ck: dpll_per_m2_ck@4a008150 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_ck>; ++ reg = <0x4a008150 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_per_x2_ck: dpll_per_x2_ck@4a008150 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_per_ck>; ++ reg = <0x4a008150 0x4>; ++}; ++ ++dpll_per_m2x2_ck: dpll_per_m2x2_ck@4a008150 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008150 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m3x2_div_ck: dpll_per_m3x2_div_ck@4a008154 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ reg = <0x4a008154 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++}; ++ ++dpll_per_m3x2_ck: dpll_per_m3x2_ck@4a008154 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_m3x2_div_ck>; ++ bit-shift = <8>; ++ reg = <0x4a008154 0x4>; ++}; ++ ++dpll_per_m4x2_ck: dpll_per_m4x2_ck@4a008158 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008158 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m5x2_ck: dpll_per_m5x2_ck@4a00815c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00815c 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m6x2_ck: dpll_per_m6x2_ck@4a008160 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008160 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m7x2_ck: dpll_per_m7x2_ck@4a008164 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008164 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++usb_hs_clk_div_ck: usb_hs_clk_div_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m3x2_ck>; ++ clock-mult = <1>; ++ clock-div = <3>; ++}; ++ ++dpll_usb_ck: dpll_usb_ck@4a008180 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-j-type-clock"; ++ clocks = <&sys_clkin_ck>, <&usb_hs_clk_div_ck>; ++ reg = <0x4a008180 0x4>, <0x4a008184 0x4>, <0x4a008188 0x4>, <0x4a00818c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck@4a0081b4 { ++ #clock-cells = <0>; ++ compatible = "ti,fixed-factor-clock"; ++ clocks = <&dpll_usb_ck>; ++ ti,autoidle-shift = <8>; ++ clock-div = <1>; ++ reg = <0x4a0081b4 0x4>; ++ clock-mult = <1>; ++ ti,autoidle-low; ++}; ++ ++dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_usb_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008190 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++ducati_clk_mux_ck: ducati_clk_mux_ck@4a008100 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&div_core_ck>, <&dpll_per_m6x2_ck>; ++ reg = <0x4a008100 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++func_12m_fclk: func_12m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <16>; ++}; ++ ++func_24m_clk: func_24m_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++func_24mc_fclk: func_24mc_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++func_48m_fclk: func_48m_fclk@4a008108 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ reg = <0x4a008108 0x4>; ++ table = < 4 0 >, < 8 1 >; ++ bit-mask = <0x1>; ++}; ++ ++func_48mc_fclk: func_48mc_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++func_64m_fclk: func_64m_fclk@4a008108 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_m4x2_ck>; ++ reg = <0x4a008108 0x4>; ++ table = < 2 0 >, < 4 1 >; ++ bit-mask = <0x1>; ++}; ++ ++func_96m_fclk: func_96m_fclk@4a008108 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ reg = <0x4a008108 0x4>; ++ table = < 2 0 >, < 4 1 >; ++ bit-mask = <0x1>; ++}; ++ ++init_60m_fclk: init_60m_fclk@4a008104 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ reg = <0x4a008104 0x4>; ++ table = < 1 0 >, < 8 1 >; ++ bit-mask = <0x1>; ++}; ++ ++l3_div_ck: l3_div_ck@4a004100 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&div_core_ck>; ++ bit-shift = <4>; ++ reg = <0x4a004100 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++l4_div_ck: l4_div_ck@4a004100 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&l3_div_ck>; ++ bit-shift = <8>; ++ reg = <0x4a004100 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++lp_clk_div_ck: lp_clk_div_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <16>; ++}; ++ ++l4_wkup_clk_mux_ck: l4_wkup_clk_mux_ck@4a306108 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&lp_clk_div_ck>; ++ reg = <0x4a306108 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mpu_periphclk: mpu_periphclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_mpu_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++ocp_abe_iclk: ocp_abe_iclk@4a004528 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&aess_fclk>; ++ bit-shift = <24>; ++ reg = <0x4a004528 0x4>; ++ table = < 2 0 >, < 1 1 >; ++ bit-mask = <0x1>; ++}; ++ ++per_abe_24m_fclk: per_abe_24m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++per_abe_nc_fclk: per_abe_nc_fclk@4a008108 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2_ck>; ++ reg = <0x4a008108 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++syc_clk_div_ck: syc_clk_div_ck@4a306100 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&sys_clkin_ck>; ++ reg = <0x4a306100 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++aes1_fck: aes1_fck@4a0095a0 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3_div_ck>; ++ bit-shift = <1>; ++ reg = <0x4a0095a0 0x4>; ++}; ++ ++aes2_fck: aes2_fck@4a0095a8 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3_div_ck>; ++ bit-shift = <1>; ++ reg = <0x4a0095a8 0x4>; ++}; ++ ++dmic_sync_mux_ck: dmic_sync_mux_ck@4a004538 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; ++ bit-shift = <25>; ++ reg = <0x4a004538 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++func_dmic_abe_gfclk: func_dmic_abe_gfclk@4a004538 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004538 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++dss_sys_clk: dss_sys_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&syc_clk_div_ck>; ++ bit-shift = <10>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_tv_clk: dss_tv_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&extalt_clkin_ck>; ++ bit-shift = <11>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_dss_clk: dss_dss_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_m5x2_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_48mhz_clk: dss_48mhz_clk@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_48mc_fclk>; ++ bit-shift = <9>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++dss_fck: dss_fck@4a009120 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3_div_ck>; ++ bit-shift = <1>; ++ reg = <0x4a009120 0x4>; ++}; ++ ++fdif_fck: fdif_fck@4a009028 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_m4x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009028 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++gpio1_dbclk: gpio1_dbclk@4a307838 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a307838 0x4>; ++}; ++ ++gpio2_dbclk: gpio2_dbclk@4a009460 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009460 0x4>; ++}; ++ ++gpio3_dbclk: gpio3_dbclk@4a009468 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009468 0x4>; ++}; ++ ++gpio4_dbclk: gpio4_dbclk@4a009470 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009470 0x4>; ++}; ++ ++gpio5_dbclk: gpio5_dbclk@4a009478 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009478 0x4>; ++}; ++ ++gpio6_dbclk: gpio6_dbclk@4a009480 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009480 0x4>; ++}; ++ ++sgx_clk_mux: sgx_clk_mux@4a009220 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_core_m7x2_ck>, <&dpll_per_m7x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009220 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++hsi_fck: hsi_fck@4a009338 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009338 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++iss_ctrlclk: iss_ctrlclk@4a009020 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_96m_fclk>; ++ bit-shift = <8>; ++ reg = <0x4a009020 0x4>; ++}; ++ ++mcasp_sync_mux_ck: mcasp_sync_mux_ck@4a004540 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; ++ bit-shift = <25>; ++ reg = <0x4a004540 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++func_mcasp_abe_gfclk: func_mcasp_abe_gfclk@4a004540 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004540 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@4a004548 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; ++ bit-shift = <25>; ++ reg = <0x4a004548 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++func_mcbsp1_gfclk: func_mcbsp1_gfclk@4a004548 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004548 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@4a004550 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; ++ bit-shift = <25>; ++ reg = <0x4a004550 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++func_mcbsp2_gfclk: func_mcbsp2_gfclk@4a004550 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004550 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@4a004558 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&syc_clk_div_ck>, <&func_24m_clk>; ++ bit-shift = <25>; ++ reg = <0x4a004558 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++func_mcbsp3_gfclk: func_mcbsp3_gfclk@4a004558 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004558 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp4_sync_mux_ck: mcbsp4_sync_mux_ck@4a0094e0 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_96m_fclk>, <&per_abe_nc_fclk>; ++ bit-shift = <25>; ++ reg = <0x4a0094e0 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++per_mcbsp4_gfclk: per_mcbsp4_gfclk@4a0094e0 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcbsp4_sync_mux_ck>, <&pad_clks_ck>; ++ bit-shift = <24>; ++ reg = <0x4a0094e0 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++hsmmc1_fclk: hsmmc1_fclk@4a009328 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_64m_fclk>, <&func_96m_fclk>; ++ bit-shift = <24>; ++ reg = <0x4a009328 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++hsmmc2_fclk: hsmmc2_fclk@4a009330 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_64m_fclk>, <&func_96m_fclk>; ++ bit-shift = <24>; ++ reg = <0x4a009330 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++ocp2scp_usb_phy_phy_48m: ocp2scp_usb_phy_phy_48m@4a0093e0 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_48m_fclk>; ++ bit-shift = <8>; ++ reg = <0x4a0093e0 0x4>; ++}; ++ ++sha2md5_fck: sha2md5_fck@4a0095c8 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3_div_ck>; ++ bit-shift = <1>; ++ reg = <0x4a0095c8 0x4>; ++}; ++ ++slimbus1_fclk_1: slimbus1_fclk_1@4a004560 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_24m_clk>; ++ bit-shift = <9>; ++ reg = <0x4a004560 0x4>; ++}; ++ ++slimbus1_fclk_0: slimbus1_fclk_0@4a004560 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&abe_24m_fclk>; ++ bit-shift = <8>; ++ reg = <0x4a004560 0x4>; ++}; ++ ++slimbus1_fclk_2: slimbus1_fclk_2@4a004560 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&pad_clks_ck>; ++ bit-shift = <10>; ++ reg = <0x4a004560 0x4>; ++}; ++ ++slimbus1_slimbus_clk: slimbus1_slimbus_clk@4a004560 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&slimbus_clk>; ++ bit-shift = <11>; ++ reg = <0x4a004560 0x4>; ++}; ++ ++slimbus2_fclk_1: slimbus2_fclk_1@4a009538 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&per_abe_24m_fclk>; ++ bit-shift = <9>; ++ reg = <0x4a009538 0x4>; ++}; ++ ++slimbus2_fclk_0: slimbus2_fclk_0@4a009538 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_24mc_fclk>; ++ bit-shift = <8>; ++ reg = <0x4a009538 0x4>; ++}; ++ ++slimbus2_slimbus_clk: slimbus2_slimbus_clk@4a009538 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&pad_slimbus_core_clks_ck>; ++ bit-shift = <10>; ++ reg = <0x4a009538 0x4>; ++}; ++ ++smartreflex_core_fck: smartreflex_core_fck@4a008638 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l4_wkup_clk_mux_ck>; ++ bit-shift = <1>; ++ reg = <0x4a008638 0x4>; ++}; ++ ++smartreflex_iva_fck: smartreflex_iva_fck@4a008630 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l4_wkup_clk_mux_ck>; ++ bit-shift = <1>; ++ reg = <0x4a008630 0x4>; ++}; ++ ++smartreflex_mpu_fck: smartreflex_mpu_fck@4a008628 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l4_wkup_clk_mux_ck>; ++ bit-shift = <1>; ++ reg = <0x4a008628 0x4>; ++}; ++ ++dmt1_clk_mux: dmt1_clk_mux@4a307840 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a307840 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++cm2_dm10_mux: cm2_dm10_mux@4a009428 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009428 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++cm2_dm11_mux: cm2_dm11_mux@4a009430 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009430 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++cm2_dm2_mux: cm2_dm2_mux@4a009438 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009438 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++cm2_dm3_mux: cm2_dm3_mux@4a009440 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009440 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++cm2_dm4_mux: cm2_dm4_mux@4a009448 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009448 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer5_sync_mux: timer5_sync_mux@4a004568 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004568 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer6_sync_mux: timer6_sync_mux@4a004570 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004570 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer7_sync_mux: timer7_sync_mux@4a004578 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004578 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer8_sync_mux: timer8_sync_mux@4a004580 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&syc_clk_div_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004580 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++cm2_dm9_mux: cm2_dm9_mux@4a009450 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009450 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++usb_host_fs_fck: usb_host_fs_fck@4a0093d0 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_48mc_fclk>; ++ reg = <0x4a0093d0 0x4>; ++ bit-shift = <1>; ++}; ++ ++utmi_p1_gfclk: utmi_p1_gfclk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&init_60m_fclk>, <&xclk60mhsp1_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009358 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&utmi_p1_gfclk>; ++ bit-shift = <8>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++utmi_p2_gfclk: utmi_p2_gfclk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&init_60m_fclk>, <&xclk60mhsp2_ck>; ++ bit-shift = <25>; ++ reg = <0x4a009358 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&utmi_p2_gfclk>; ++ bit-shift = <9>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&init_60m_fclk>; ++ bit-shift = <10>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ bit-shift = <13>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&init_60m_fclk>; ++ bit-shift = <11>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&init_60m_fclk>; ++ bit-shift = <12>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ bit-shift = <14>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++usb_host_hs_func48mclk: usb_host_hs_func48mclk@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_48mc_fclk>; ++ bit-shift = <15>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++usb_host_hs_fck: usb_host_hs_fck@4a009358 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&init_60m_fclk>; ++ bit-shift = <1>; ++ reg = <0x4a009358 0x4>; ++}; ++ ++otg_60m_gfclk: otg_60m_gfclk@4a009360 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&utmi_phy_clkout_ck>, <&xclk60motg_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009360 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++usb_otg_hs_xclk: usb_otg_hs_xclk@4a009360 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&otg_60m_gfclk>; ++ bit-shift = <8>; ++ reg = <0x4a009360 0x4>; ++}; ++ ++usb_otg_hs_ick: usb_otg_hs_ick@4a009360 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3_div_ck>; ++ bit-shift = <0>; ++ reg = <0x4a009360 0x4>; ++}; ++ ++usb_phy_cm_clk32k: usb_phy_cm_clk32k@4a008640 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a008640 0x4>; ++}; ++ ++usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@4a009368 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&init_60m_fclk>; ++ bit-shift = <10>; ++ reg = <0x4a009368 0x4>; ++}; ++ ++usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@4a009368 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&init_60m_fclk>; ++ bit-shift = <8>; ++ reg = <0x4a009368 0x4>; ++}; ++ ++usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@4a009368 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&init_60m_fclk>; ++ bit-shift = <9>; ++ reg = <0x4a009368 0x4>; ++}; ++ ++usb_tll_hs_ick: usb_tll_hs_ick@4a009368 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l4_div_ck>; ++ bit-shift = <0>; ++ reg = <0x4a009368 0x4>; ++}; ++ ++usim_ck: usim_ck@4a307858 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_m4x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a307858 0x4>; ++ table = < 14 0 >, < 18 1 >; ++ bit-mask = <0x1>; ++}; ++ ++usim_fclk: usim_fclk@4a307858 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&usim_ck>; ++ bit-shift = <8>; ++ reg = <0x4a307858 0x4>; ++}; ++ ++pmd_stm_clock_mux_ck: pmd_stm_clock_mux_ck@4a307a20 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>; ++ bit-shift = <20>; ++ reg = <0x4a307a20 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++pmd_trace_clk_mux_ck: pmd_trace_clk_mux_ck@4a307a20 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m6x2_ck>, <&tie_low_clock_ck>; ++ bit-shift = <22>; ++ reg = <0x4a307a20 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++stm_clk_div_ck: stm_clk_div_ck@4a307a20 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&pmd_stm_clock_mux_ck>; ++ bit-shift = <27>; ++ reg = <0x4a307a20 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++trace_clk_div_div_ck: trace_clk_div_div_ck@4a307a20 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ bit-shift = <24>; ++ reg = <0x4a307a20 0x4>; ++ bit-mask = <0x7>; ++ index-power-of-two; ++}; ++ ++trace_clk_div_ck: trace_clk_div_ck { ++ #clock-cells = <0>; ++ compatible = "ti,clkdm-gate-clock"; ++ clocks = <&trace_clk_div_div_ck>; ++}; ++ ++auxclk0_src_mux_ck: auxclk0_src_mux_ck@4a30a310 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4a30a310 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk0_src_ck: auxclk0_src_ck@4a30a310 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk0_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4a30a310 0x4>; ++}; ++ ++auxclk0_ck: auxclk0_ck@4a30a310 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk0_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4a30a310 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk1_src_mux_ck: auxclk1_src_mux_ck@4a30a314 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4a30a314 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk1_src_ck: auxclk1_src_ck@4a30a314 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk1_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4a30a314 0x4>; ++}; ++ ++auxclk1_ck: auxclk1_ck@4a30a314 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk1_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4a30a314 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk2_src_mux_ck: auxclk2_src_mux_ck@4a30a318 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4a30a318 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk2_src_ck: auxclk2_src_ck@4a30a318 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk2_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4a30a318 0x4>; ++}; ++ ++auxclk2_ck: auxclk2_ck@4a30a318 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk2_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4a30a318 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk3_src_mux_ck: auxclk3_src_mux_ck@4a30a31c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4a30a31c 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk3_src_ck: auxclk3_src_ck@4a30a31c { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk3_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4a30a31c 0x4>; ++}; ++ ++auxclk3_ck: auxclk3_ck@4a30a31c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk3_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4a30a31c 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk4_src_mux_ck: auxclk4_src_mux_ck@4a30a320 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4a30a320 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk4_src_ck: auxclk4_src_ck@4a30a320 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk4_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4a30a320 0x4>; ++}; ++ ++auxclk4_ck: auxclk4_ck@4a30a320 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk4_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4a30a320 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk5_src_mux_ck: auxclk5_src_mux_ck@4a30a324 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin_ck>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4a30a324 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk5_src_ck: auxclk5_src_ck@4a30a324 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk5_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4a30a324 0x4>; ++}; ++ ++auxclk5_ck: auxclk5_ck@4a30a324 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk5_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4a30a324 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclkreq0_ck: auxclkreq0_ck@4a30a210 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ++ bit-shift = <2>; ++ reg = <0x4a30a210 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq1_ck: auxclkreq1_ck@4a30a214 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ++ bit-shift = <2>; ++ reg = <0x4a30a214 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq2_ck: auxclkreq2_ck@4a30a218 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ++ bit-shift = <2>; ++ reg = <0x4a30a218 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq3_ck: auxclkreq3_ck@4a30a21c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ++ bit-shift = <2>; ++ reg = <0x4a30a21c 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq4_ck: auxclkreq4_ck@4a30a220 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ++ bit-shift = <2>; ++ reg = <0x4a30a220 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq5_ck: auxclkreq5_ck@4a30a224 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>, <&auxclk5_ck>; ++ bit-shift = <2>; ++ reg = <0x4a30a224 0x4>; ++ bit-mask = <0x7>; ++}; +--- a/arch/arm/boot/dts/omap4.dtsi ++++ b/arch/arm/boot/dts/omap4.dtsi +@@ -17,6 +17,10 @@ + interrupt-parent = <&gic>; + + aliases { ++ i2c0 = &i2c1; ++ i2c1 = &i2c2; ++ i2c2 = &i2c3; ++ i2c3 = &i2c4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; +@@ -32,6 +36,11 @@ + device_type = "cpu"; + next-level-cache = <&L2>; + reg = <0x0>; ++ ++ clocks = <&dpll_mpu_ck>; ++ clock-names = "cpu"; ++ ++ clock-latency = <300000>; /* From omap-cpufreq driver */ + }; + cpu@1 { + compatible = "arm,cortex-a9"; +@@ -107,6 +116,8 @@ + compatible = "ti,omap-counter32k"; + reg = <0x4a304000 0x20>; + ti,hwmods = "counter_32k"; ++ clocks = <&sys_32k_ck>; ++ clock-names = "fck"; + }; + + omap4_pmx_core: pinmux@4a100040 { +@@ -136,6 +147,8 @@ + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; ++ clocks = <&l3_div_ck>; ++ clock-names = "fck"; + }; + + gpio1: gpio@4a310000 { +@@ -143,6 +156,8 @@ + reg = <0x4a310000 0x200>; + interrupts = ; + ti,hwmods = "gpio1"; ++ clocks = <&l4_wkup_clk_mux_ck>, <&gpio1_dbclk>; ++ clock-names = "fck", "dbclk"; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; +@@ -155,6 +170,8 @@ + reg = <0x48055000 0x200>; + interrupts = ; + ti,hwmods = "gpio2"; ++ clocks = <&l4_div_ck>, <&gpio2_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -166,6 +183,8 @@ + reg = <0x48057000 0x200>; + interrupts = ; + ti,hwmods = "gpio3"; ++ clocks = <&l4_div_ck>, <&gpio3_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -177,6 +196,8 @@ + reg = <0x48059000 0x200>; + interrupts = ; + ti,hwmods = "gpio4"; ++ clocks = <&l4_div_ck>, <&gpio4_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -188,6 +209,8 @@ + reg = <0x4805b000 0x200>; + interrupts = ; + ti,hwmods = "gpio5"; ++ clocks = <&l4_div_ck>, <&gpio5_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -199,6 +222,8 @@ + reg = <0x4805d000 0x200>; + interrupts = ; + ti,hwmods = "gpio6"; ++ clocks = <&l4_div_ck>, <&gpio6_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -214,6 +239,7 @@ + gpmc,num-cs = <8>; + gpmc,num-waitpins = <4>; + ti,hwmods = "gpmc"; ++ ti,no-idle; + }; + + uart1: serial@4806a000 { +@@ -221,6 +247,8 @@ + reg = <0x4806a000 0x100>; + interrupts = ; + ti,hwmods = "uart1"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + }; + +@@ -229,6 +257,8 @@ + reg = <0x4806c000 0x100>; + interrupts = ; + ti,hwmods = "uart2"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + }; + +@@ -237,6 +267,8 @@ + reg = <0x48020000 0x100>; + interrupts = ; + ti,hwmods = "uart3"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + }; + +@@ -245,6 +277,8 @@ + reg = <0x4806e000 0x100>; + interrupts = ; + ti,hwmods = "uart4"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; + }; + +@@ -255,6 +289,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; + }; + + i2c2: i2c@48072000 { +@@ -264,6 +300,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; + }; + + i2c3: i2c@48060000 { +@@ -273,6 +311,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; + }; + + i2c4: i2c@48350000 { +@@ -282,6 +322,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; + }; + + mcspi1: spi@48098000 { +@@ -291,6 +333,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, +@@ -311,6 +355,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, +@@ -326,6 +372,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; +@@ -338,6 +386,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; +@@ -348,6 +398,8 @@ + reg = <0x4809c000 0x400>; + interrupts = ; + ti,hwmods = "mmc1"; ++ clocks = <&hsmmc1_fclk>; ++ clock-names = "fck"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; +@@ -359,6 +411,8 @@ + reg = <0x480b4000 0x400>; + interrupts = ; + ti,hwmods = "mmc2"; ++ clocks = <&hsmmc2_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; +@@ -369,6 +423,8 @@ + reg = <0x480ad000 0x400>; + interrupts = ; + ti,hwmods = "mmc3"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; +@@ -379,6 +435,8 @@ + reg = <0x480d1000 0x400>; + interrupts = ; + ti,hwmods = "mmc4"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; +@@ -389,16 +447,20 @@ + reg = <0x480d5000 0x400>; + interrupts = ; + ti,hwmods = "mmc5"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + + wdt2: wdt@4a314000 { +- compatible = "ti,omap4-wdt", "ti,omap3-wdt"; ++ compatible = "ti,omap4-wdt"; + reg = <0x4a314000 0x80>; + interrupts = ; + ti,hwmods = "wd_timer2"; ++ clocks = <&sys_32k_ck>; ++ clock-names = "fck"; + }; + + mcpdm: mcpdm@40132000 { +@@ -408,6 +470,8 @@ + reg-names = "mpu", "dma"; + interrupts = ; + ti,hwmods = "mcpdm"; ++ clocks = <&pad_clks_ck>; ++ clock-names = "fck"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; +@@ -420,6 +484,8 @@ + reg-names = "mpu", "dma"; + interrupts = ; + ti,hwmods = "dmic"; ++ clocks = <&func_dmic_abe_gfclk>; ++ clock-names = "fck"; + dmas = <&sdma 67>; + dma-names = "up_link"; + }; +@@ -433,6 +499,8 @@ + interrupt-names = "common"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; ++ clocks = <&func_mcbsp1_gfclk>, <&pad_clks_ck>, <&mcbsp1_sync_mux_ck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; +@@ -447,6 +515,8 @@ + interrupt-names = "common"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; ++ clocks = <&func_mcbsp2_gfclk>, <&pad_clks_ck>, <&mcbsp2_sync_mux_ck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; +@@ -461,6 +531,8 @@ + interrupt-names = "common"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; ++ clocks = <&func_mcbsp3_gfclk>, <&pad_clks_ck>, <&mcbsp3_sync_mux_ck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; +@@ -474,6 +546,8 @@ + interrupt-names = "common"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; ++ clocks = <&per_mcbsp4_gfclk>, <&pad_clks_ck>, <&mcbsp4_sync_mux_ck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 31>, + <&sdma 32>; + dma-names = "tx", "rx"; +@@ -485,6 +559,15 @@ + interrupts = ; + reg-names = "mpu"; + ti,hwmods = "kbd"; ++ clocks = <&sys_32k_ck>; ++ clock-names = "fck"; ++ }; ++ ++ dmm: dmm@4e000000 { ++ compatible = "ti,omap4-dmm"; ++ reg = <0x4e000000 0x800>; ++ interrupts = <0 113 0x4>; ++ ti,hwmods = "dmm"; + }; + + emif1: emif@4c000000 { +@@ -492,6 +575,9 @@ + reg = <0x4c000000 0x100>; + interrupts = ; + ti,hwmods = "emif1"; ++ ti,no-idle; ++ clocks = <&ddrphy_ck>; ++ clock-names = "fck"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; +@@ -503,6 +589,9 @@ + reg = <0x4d000000 0x100>; + interrupts = ; + ti,hwmods = "emif2"; ++ ti,no-idle; ++ clocks = <&ddrphy_ck>; ++ clock-names = "fck"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; +@@ -516,18 +605,36 @@ + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp_usb_phy"; ++ clocks = <&ocp2scp_usb_phy_phy_48m>; ++ clock-names = "fck"; + usb2_phy: usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>; +- ctrl-module = <&omap_control_usb>; ++ ctrl-module = <&omap_control_usb2phy>; ++ clocks = <&usb_phy_cm_clk32k>, <&ocp2scp_usb_phy_phy_48m>; ++ clock-names = "wkupclk", "refclk"; ++ #phy-cells = <0>; + }; + }; + ++ mailbox: mailbox@4a0f4000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x4a0f4000 0x200>; ++ interrupts = ; ++ ti,hwmods = "mailbox"; ++ ti,mbox-num-users = <3>; ++ ti,mbox-num-fifos = <8>; ++ ti,mbox-names = "mbox-ipu", "mbox-dsp"; ++ ti,mbox-data = <0 1 0 0>, <3 2 0 0>; ++ }; ++ + timer1: timer@4a318000 { + compatible = "ti,omap3430-timer"; + reg = <0x4a318000 0x80>; + interrupts = ; + ti,hwmods = "timer1"; ++ clocks = <&dmt1_clk_mux>; ++ clock-names = "fck"; + ti,timer-alwon; + }; + +@@ -536,6 +643,8 @@ + reg = <0x48032000 0x80>; + interrupts = ; + ti,hwmods = "timer2"; ++ clocks = <&cm2_dm2_mux>; ++ clock-names = "fck"; + }; + + timer3: timer@48034000 { +@@ -543,6 +652,8 @@ + reg = <0x48034000 0x80>; + interrupts = ; + ti,hwmods = "timer3"; ++ clocks = <&cm2_dm3_mux>; ++ clock-names = "fck"; + }; + + timer4: timer@48036000 { +@@ -550,6 +661,8 @@ + reg = <0x48036000 0x80>; + interrupts = ; + ti,hwmods = "timer4"; ++ clocks = <&cm2_dm4_mux>; ++ clock-names = "fck"; + }; + + timer5: timer@40138000 { +@@ -558,6 +671,8 @@ + <0x49038000 0x80>; + interrupts = ; + ti,hwmods = "timer5"; ++ clocks = <&timer5_sync_mux>; ++ clock-names = "fck"; + ti,timer-dsp; + }; + +@@ -567,6 +682,8 @@ + <0x4903a000 0x80>; + interrupts = ; + ti,hwmods = "timer6"; ++ clocks = <&timer6_sync_mux>; ++ clock-names = "fck"; + ti,timer-dsp; + }; + +@@ -576,6 +693,8 @@ + <0x4903c000 0x80>; + interrupts = ; + ti,hwmods = "timer7"; ++ clocks = <&timer7_sync_mux>; ++ clock-names = "fck"; + ti,timer-dsp; + }; + +@@ -585,6 +704,8 @@ + <0x4903e000 0x80>; + interrupts = ; + ti,hwmods = "timer8"; ++ clocks = <&timer8_sync_mux>; ++ clock-names = "fck"; + ti,timer-pwm; + ti,timer-dsp; + }; +@@ -594,6 +715,8 @@ + reg = <0x4803e000 0x80>; + interrupts = ; + ti,hwmods = "timer9"; ++ clocks = <&cm2_dm9_mux>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -602,6 +725,8 @@ + reg = <0x48086000 0x80>; + interrupts = ; + ti,hwmods = "timer10"; ++ clocks = <&cm2_dm10_mux>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -610,6 +735,8 @@ + reg = <0x48088000 0x80>; + interrupts = ; + ti,hwmods = "timer11"; ++ clocks = <&cm2_dm11_mux>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -618,12 +745,16 @@ + reg = <0x4a062000 0x1000>; + interrupts = ; + ti,hwmods = "usb_tll_hs"; ++ clocks = <&usb_tll_hs_ick>; ++ clock-names = "fck"; + }; + + usbhshost: usbhshost@4a064000 { + compatible = "ti,usbhs-host"; + reg = <0x4a064000 0x800>; + ti,hwmods = "usb_host_hs"; ++ clocks = <&usb_host_hs_fck>; ++ clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges; +@@ -643,12 +774,16 @@ + }; + }; + +- omap_control_usb: omap-control-usb@4a002300 { +- compatible = "ti,omap-control-usb"; +- reg = <0x4a002300 0x4>, +- <0x4a00233c 0x4>; +- reg-names = "control_dev_conf", "otghs_control"; +- ti,type = <1>; ++ omap_control_usb2phy: control-phy@4a002300 { ++ compatible = "ti,control-phy-usb2"; ++ reg = <0x4a002300 0x4>; ++ reg-names = "power"; ++ }; ++ ++ omap_control_usbotg: control-phy@4a00233c { ++ compatible = "ti,control-phy-otghs"; ++ reg = <0x4a00233c 0x4>; ++ reg-names = "otghs_control"; + }; + + usb_otg_hs: usb_otg_hs@4a0ab000 { +@@ -657,11 +792,98 @@ + interrupts = , ; + interrupt-names = "mc", "dma"; + ti,hwmods = "usb_otg_hs"; ++ clocks = <&usb_otg_hs_ick>, <&usb_otg_hs_xclk>; ++ clock-names = "fck", "xclk"; + usb-phy = <&usb2_phy>; ++ phys = <&usb2_phy>; ++ phy-names = "usb2-phy"; + multipoint = <1>; + num-eps = <16>; + ram-bits = <12>; +- ti,has-mailbox; ++ ctrl-module = <&omap_control_usbotg>; ++ dr_mode = "peripheral"; ++ }; ++ ++ dss@58000000 { ++ compatible = "ti,omap4-dss", "simple-bus"; ++ reg = <0x58000000 0x80>; ++ ti,hwmods = "dss_core"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ dispc@58001000 { ++ compatible = "ti,omap4-dispc"; ++ reg = <0x58001000 0x1000>; ++ interrupts = <0 25 0x4>; ++ ti,hwmods = "dss_dispc"; ++ }; ++ ++ dpi: encoder@0 { ++ compatible = "ti,omap4-dpi"; ++ }; ++ ++ rfbi: encoder@58002000 { ++ compatible = "ti,omap4-rfbi"; ++ reg = <0x58002000 0x1000>; ++ ti,hwmods = "dss_rfbi"; ++ }; ++ ++ /* ++ * Accessing venc registers cause a crash on omap4, so ++ * this is disabled for now. ++ */ ++ /* ++ venc: encoder@58003000 { ++ compatible = "ti,omap4-venc"; ++ reg = <0x58003000 0x1000>; ++ ti,hwmods = "dss_venc"; ++ }; ++ */ ++ ++ dsi1: encoder@58004000 { ++ compatible = "ti,omap4-dsi"; ++ reg = <0x58004000 0x200>; ++ interrupts = <0 53 0x4>; ++ ti,hwmods = "dss_dsi1"; ++ }; ++ ++ dsi2: encoder@58005000 { ++ compatible = "ti,omap4-dsi"; ++ reg = <0x58005000 0x200>; ++ interrupts = <0 84 0x4>; ++ ti,hwmods = "dss_dsi2"; ++ }; ++ ++ hdmi: encoder@58006000 { ++ compatible = "ti,omap4-hdmi"; ++ reg = <0x58006000 0x200>, ++ <0x58006200 0x100>, ++ <0x58006300 0x100>, ++ <0x58006400 0x1000>; ++ reg-names = "hdmi_wp", "hdmi_pllctrl", ++ "hdmi_txphy", "hdmi_core"; ++ interrupts = <0 101 0x4>; ++ ti,hwmods = "dss_hdmi"; ++ }; ++ }; ++ ++ aes: aes@4b501000 { ++ compatible = "ti,omap4-aes"; ++ ti,hwmods = "aes"; ++ reg = <0x4b501000 0xa0>; ++ interrupts = ; ++ dmas = <&sdma 111>, <&sdma 110>; ++ dma-names = "tx", "rx"; ++ }; ++ ++ des: des@480a5000 { ++ compatible = "ti,omap4-des"; ++ ti,hwmods = "des"; ++ reg = <0x480a5000 0xa0>; ++ interrupts = ; ++ dmas = <&sdma 117>, <&sdma 116>; ++ dma-names = "tx", "rx"; + }; + }; + }; +--- a/arch/arm/boot/dts/omap4-panda-common.dtsi ++++ b/arch/arm/boot/dts/omap4-panda-common.dtsi +@@ -60,22 +60,6 @@ + "AFMR", "Line In"; + }; + +- /* +- * Temp hack: Need to be replaced with the proper gpio-controlled +- * reset driver as soon it will be merged. +- * http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 +- */ +- /* HS USB Port 1 RESET */ +- hsusb1_reset: hsusb1_reset_reg { +- compatible = "regulator-fixed"; +- regulator-name = "hsusb1_reset"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- gpio = <&gpio2 30 0>; /* gpio_62 */ +- startup-delay-us = <70000>; +- enable-active-high; +- }; +- + /* HS USB Port 1 Power */ + hsusb1_power: hsusb1_power_reg { + compatible = "regulator-fixed"; +@@ -97,14 +81,10 @@ + /* HS USB Host PHY on PORT 1 */ + hsusb1_phy: hsusb1_phy { + compatible = "usb-nop-xceiv"; +- reset-supply = <&hsusb1_reset>; ++ reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>; /* gpio_62 */ + vcc-supply = <&hsusb1_power>; +- /** +- * FIXME: +- * put the right clock phandle here when available +- * clocks = <&auxclk3>; +- * clock-names = "main_clk"; +- */ ++ clocks = <&auxclk3_ck>; ++ clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + +@@ -401,3 +381,51 @@ + &usbhsehci { + phys = <&hsusb1_phy>; + }; ++ ++&dsi1 { ++ vdds_dsi-supply = <&vcxio>; ++}; ++ ++&dsi2 { ++ vdds_dsi-supply = <&vcxio>; ++}; ++ ++&hdmi { ++ vdda_hdmi_dac-supply = <&vdac>; ++}; ++ ++/ { ++ aliases { ++ display0 = &dvi0; ++ display1 = &hdmi0; ++ }; ++ ++ tfp410: encoder@0 { ++ compatible = "ti,tfp410"; ++ video-source = <&dpi>; ++ data-lines = <24>; ++ gpios = <&gpio1 0 0>; /* 0, power-down */ ++ }; ++ ++ dvi0: connector@0 { ++ compatible = "ti,dvi_connector"; ++ video-source = <&tfp410>; ++ i2c-bus = <&i2c3>; ++ }; ++ ++ tpd12s015: encoder@1 { ++ compatible = "ti,tpd12s015"; ++ ++ video-source = <&hdmi>; ++ ++ gpios = <&gpio2 28 0>, /* 60, CT CP HPD */ ++ <&gpio2 9 0>, /* 41, LS OE */ ++ <&gpio2 31 0>; /* 63, HPD */ ++ }; ++ ++ hdmi0: connector@1 { ++ compatible = "ti,hdmi_connector"; ++ ++ video-source = <&tpd12s015>; ++ }; ++}; +--- a/arch/arm/boot/dts/omap4-sdp.dts ++++ b/arch/arm/boot/dts/omap4-sdp.dts +@@ -569,3 +569,73 @@ + mode = <3>; + power = <50>; + }; ++ ++&dsi1 { ++ vdds_dsi-supply = <&vcxio>; ++}; ++ ++&dsi2 { ++ vdds_dsi-supply = <&vcxio>; ++}; ++ ++&hdmi { ++ vdda_hdmi_dac-supply = <&vdac>; ++}; ++ ++/ { ++ aliases { ++ display0 = &lcd0; ++ display1 = &lcd1; ++ display2 = &hdmi0; ++ }; ++ ++ lcd0: display@0 { ++ compatible = "tpo,taal", "panel-dsi-cm"; ++ ++ video-source = <&dsi1>; ++ ++ lanes = < ++ 0 /* clk + */ ++ 1 /* clk - */ ++ 2 /* data1 + */ ++ 3 /* data1 - */ ++ 4 /* data2 + */ ++ 5 /* data2 - */ ++ >; ++ ++ gpios = <&gpio4 6 0>; /* 102, reset */ ++ }; ++ ++ lcd1: display@1 { ++ compatible = "tpo,taal", "panel-dsi-cm"; ++ ++ video-source = <&dsi2>; ++ ++ lanes = < ++ 0 /* clk + */ ++ 1 /* clk - */ ++ 2 /* data1 + */ ++ 3 /* data1 - */ ++ 4 /* data2 + */ ++ 5 /* data2 - */ ++ >; ++ ++ gpios = <&gpio4 8 0>; /* 104, reset */ ++ }; ++ ++ tpd12s015: encoder@0 { ++ compatible = "ti,tpd12s015"; ++ ++ video-source = <&hdmi>; ++ ++ gpios = <&gpio2 28 0>, /* 60, CT CP HPD */ ++ <&gpio2 9 0>, /* 41, LS OE */ ++ <&gpio2 31 0>; /* 63, HPD */ ++ }; ++ ++ hdmi0: connector@0 { ++ compatible = "ti,hdmi_connector"; ++ ++ video-source = <&tpd12s015>; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi +@@ -0,0 +1,1400 @@ ++/* ++ * Device Tree Source for OMAP5 clock data ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++pad_clks_src_ck: pad_clks_src_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++pad_clks_ck: pad_clks_ck@4a004108 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&pad_clks_src_ck>; ++ bit-shift = <8>; ++ reg = <0x4a004108 0x4>; ++}; ++ ++secure_32k_clk_src_ck: secure_32k_clk_src_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++slimbus_src_clk: slimbus_src_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++slimbus_clk: slimbus_clk@4a004108 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&slimbus_src_clk>; ++ bit-shift = <10>; ++ reg = <0x4a004108 0x4>; ++}; ++ ++sys_32k_ck: sys_32k_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <32768>; ++}; ++ ++virt_12000000_ck: virt_12000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <12000000>; ++}; ++ ++virt_13000000_ck: virt_13000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <13000000>; ++}; ++ ++virt_16800000_ck: virt_16800000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <16800000>; ++}; ++ ++virt_19200000_ck: virt_19200000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <19200000>; ++}; ++ ++virt_26000000_ck: virt_26000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <26000000>; ++}; ++ ++virt_27000000_ck: virt_27000000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <27000000>; ++}; ++ ++virt_38400000_ck: virt_38400000_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <38400000>; ++}; ++ ++sys_clkin: sys_clkin@4ae06110 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; ++ reg = <0x4ae06110 0x4>; ++ bit-mask = <0x7>; ++ index-starts-at-one; ++}; ++ ++xclk60mhsp1_ck: xclk60mhsp1_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <60000000>; ++}; ++ ++xclk60mhsp2_ck: xclk60mhsp2_ck { ++ #clock-cells = <0>; ++ compatible = "fixed-clock"; ++ clock-frequency = <60000000>; ++}; ++ ++abe_dpll_bypass_clk_mux: abe_dpll_bypass_clk_mux@4ae06108 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ reg = <0x4ae06108 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++abe_dpll_clk_mux: abe_dpll_clk_mux@4ae0610c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ reg = <0x4ae0610c 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dpll_abe_ck: dpll_abe_ck@4a0041e0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-m4xen-clock"; ++ clocks = <&abe_dpll_clk_mux>, <&abe_dpll_bypass_clk_mux>; ++ reg = <0x4a0041e0 0x4>, <0x4a0041e4 0x4>, <0x4a0041e8 0x4>, <0x4a0041ec 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_abe_x2_ck: dpll_abe_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_abe_ck>; ++}; ++ ++dpll_abe_m2x2_ck: dpll_abe_m2x2_ck@4a0041f0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_abe_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041f0 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++abe_24m_fclk: abe_24m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <8>; ++}; ++ ++abe_clk: abe_clk@4a004108 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ reg = <0x4a004108 0x4>; ++ bit-mask = <0x3>; ++ index-power-of-two; ++}; ++ ++abe_iclk: abe_iclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&abe_clk>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++abe_lp_clk_div: abe_lp_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <16>; ++}; ++ ++dpll_abe_m3x2_ck: dpll_abe_m3x2_ck@4a0041f4 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_abe_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041f4 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_ck: dpll_core_ck@4a004120 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-core-clock"; ++ clocks = <&sys_clkin>, <&dpll_abe_m3x2_ck>; ++ reg = <0x4a004120 0x4>, <0x4a004124 0x4>, <0x4a004128 0x4>, <0x4a00412c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_core_x2_ck: dpll_core_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_core_ck>; ++}; ++ ++dpll_core_h21x2_ck: dpll_core_h21x2_ck@4a004150 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004150 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++c2c_fclk: c2c_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h21x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++c2c_iclk: c2c_iclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&c2c_fclk>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++custefuse_sys_gfclk_div: custefuse_sys_gfclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++dpll_core_h11x2_ck: dpll_core_h11x2_ck@4a004138 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004138 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h12x2_ck: dpll_core_h12x2_ck@4a00413c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00413c 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h13x2_ck: dpll_core_h13x2_ck@4a004140 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004140 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h14x2_ck: dpll_core_h14x2_ck@4a004144 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004144 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h22x2_ck: dpll_core_h22x2_ck@4a004154 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004154 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h23x2_ck: dpll_core_h23x2_ck@4a004158 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004158 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_h24x2_ck: dpll_core_h24x2_ck@4a00415c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00415c 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_m2_ck: dpll_core_m2_ck@4a004130 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004130 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_core_m3x2_ck: dpll_core_m3x2_ck@4a004134 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_core_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004134 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++iva_dpll_hs_clk_div: iva_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_iva_ck: dpll_iva_ck@4a0041a0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin>, <&iva_dpll_hs_clk_div>; ++ reg = <0x4a0041a0 0x4>, <0x4a0041a4 0x4>, <0x4a0041a8 0x4>, <0x4a0041ac 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_iva_x2_ck: dpll_iva_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_iva_ck>; ++}; ++ ++dpll_iva_h11x2_ck: dpll_iva_h11x2_ck@4a0041b8 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_iva_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041b8 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_iva_h12x2_ck: dpll_iva_h12x2_ck@4a0041bc { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_iva_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0041bc 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_mpu_ck: dpll_mpu_ck@4a004160 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin>, <&mpu_dpll_hs_clk_div>; ++ reg = <0x4a004160 0x4>, <0x4a004164 0x4>, <0x4a004168 0x4>, <0x4a00416c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_mpu_m2_ck: dpll_mpu_m2_ck@4a004170 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_mpu_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a004170 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++per_dpll_hs_clk_div: per_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m3x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++dpll_per_ck: dpll_per_ck@4a008140 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin>, <&per_dpll_hs_clk_div>; ++ reg = <0x4a008140 0x4>, <0x4a008144 0x4>, <0x4a008148 0x4>, <0x4a00814c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_per_x2_ck: dpll_per_x2_ck { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-x2-clock"; ++ clocks = <&dpll_per_ck>; ++}; ++ ++dpll_per_h11x2_ck: dpll_per_h11x2_ck@4a008158 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008158 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_h12x2_ck: dpll_per_h12x2_ck@4a00815c { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a00815c 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_h14x2_ck: dpll_per_h14x2_ck@4a008164 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008164 0x4>; ++ bit-mask = <0x3f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m2_ck: dpll_per_m2_ck@4a008150 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008150 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m2x2_ck: dpll_per_m2x2_ck@4a008150 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008150 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_per_m3x2_ck: dpll_per_m3x2_ck@4a008154 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_per_x2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008154 0x4>; ++ bit-mask = <0x1f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_unipro1_ck: dpll_unipro1_ck@4a008200 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin>, <&sys_clkin>; ++ reg = <0x4a008200 0x4>, <0x4a008204 0x4>, <0x4a008208 0x4>, <0x4a00820c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_unipro1_clkdcoldo: dpll_unipro1_clkdcoldo { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_unipro1_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_unipro1_m2_ck: dpll_unipro1_m2_ck@4a008210 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_unipro1_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008210 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dpll_unipro2_ck: dpll_unipro2_ck@4a0081c0 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-clock"; ++ clocks = <&sys_clkin>, <&sys_clkin>; ++ reg = <0x4a0081c0 0x4>, <0x4a0081c4 0x4>, <0x4a0081c8 0x4>, <0x4a0081cc 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_unipro2_clkdcoldo: dpll_unipro2_clkdcoldo { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_unipro2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_unipro2_m2_ck: dpll_unipro2_m2_ck@4a0081d0 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_unipro2_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a0081d0 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++usb_dpll_hs_clk_div: usb_dpll_hs_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_abe_m3x2_ck>; ++ clock-mult = <1>; ++ clock-div = <3>; ++}; ++ ++dpll_usb_ck: dpll_usb_ck@4a008180 { ++ #clock-cells = <0>; ++ compatible = "ti,omap4-dpll-j-type-clock"; ++ clocks = <&sys_clkin>, <&usb_dpll_hs_clk_div>; ++ reg = <0x4a008180 0x4>, <0x4a008184 0x4>, <0x4a008188 0x4>, <0x4a00818c 0x4>; ++ reg-names = "control", "idlest", "autoidle", "mult-div1"; ++}; ++ ++dpll_usb_clkdcoldo: dpll_usb_clkdcoldo { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_usb_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { ++ #clock-cells = <0>; ++ compatible = "ti,divider-clock"; ++ clocks = <&dpll_usb_ck>; ++ ti,autoidle-shift = <8>; ++ reg = <0x4a008190 0x4>; ++ bit-mask = <0x7f>; ++ index-starts-at-one; ++ ti,autoidle-low; ++}; ++ ++dss_syc_gfclk_div: dss_syc_gfclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&sys_clkin>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++func_128m_clk: func_128m_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_h11x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++func_12m_fclk: func_12m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <16>; ++}; ++ ++func_24m_clk: func_24m_clk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++func_48m_fclk: func_48m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <4>; ++}; ++ ++func_96m_fclk: func_96m_fclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ clock-mult = <1>; ++ clock-div = <2>; ++}; ++ ++l3_iclk_div: l3_iclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&dpll_core_h12x2_ck>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++gpu_l3_iclk: gpu_l3_iclk { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l3_iclk_div>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l3init_60m_fclk: l3init_60m_fclk@4a008104 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ reg = <0x4a008104 0x4>; ++ table = < 1 0 >, < 8 1 >; ++ bit-mask = <0x1>; ++}; ++ ++wkupaon_iclk_mux: wkupaon_iclk_mux@4ae06108 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&abe_lp_clk_div>; ++ reg = <0x4ae06108 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++l3instr_ts_gclk_div: l3instr_ts_gclk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&wkupaon_iclk_mux>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++l4_root_clk_div: l4_root_clk_div { ++ #clock-cells = <0>; ++ compatible = "fixed-factor-clock"; ++ clocks = <&l3_iclk_div>; ++ clock-mult = <1>; ++ clock-div = <1>; ++}; ++ ++dss_32khz_clk: dss_32khz_clk@4a009420 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <11>; ++ reg = <0x4a009420 0x4>; ++}; ++ ++dss_48mhz_clk: dss_48mhz_clk@4a009420 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_48m_fclk>; ++ bit-shift = <9>; ++ reg = <0x4a009420 0x4>; ++}; ++ ++dss_dss_clk: dss_dss_clk@4a009420 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_per_h12x2_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009420 0x4>; ++}; ++ ++dss_sys_clk: dss_sys_clk@4a009420 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dss_syc_gfclk_div>; ++ bit-shift = <10>; ++ reg = <0x4a009420 0x4>; ++}; ++ ++gpio1_dbclk: gpio1_dbclk@4ae07938 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4ae07938 0x4>; ++}; ++ ++gpio2_dbclk: gpio2_dbclk@4a009060 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009060 0x4>; ++}; ++ ++gpio3_dbclk: gpio3_dbclk@4a009068 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009068 0x4>; ++}; ++ ++gpio4_dbclk: gpio4_dbclk@4a009070 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009070 0x4>; ++}; ++ ++gpio5_dbclk: gpio5_dbclk@4a009078 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009078 0x4>; ++}; ++ ++gpio6_dbclk: gpio6_dbclk@4a009080 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009080 0x4>; ++}; ++ ++gpio7_dbclk: gpio7_dbclk@4a009110 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009110 0x4>; ++}; ++ ++gpio8_dbclk: gpio8_dbclk@4a009118 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009118 0x4>; ++}; ++ ++iss_ctrlclk: iss_ctrlclk@4a009320 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&func_96m_fclk>; ++ bit-shift = <8>; ++ reg = <0x4a009320 0x4>; ++}; ++ ++lli_txphy_clk: lli_txphy_clk@4a008f20 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_unipro1_clkdcoldo>; ++ bit-shift = <8>; ++ reg = <0x4a008f20 0x4>; ++}; ++ ++lli_txphy_ls_clk: lli_txphy_ls_clk@4a008f20 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_unipro1_m2_ck>; ++ bit-shift = <9>; ++ reg = <0x4a008f20 0x4>; ++}; ++ ++mmc1_32khz_clk: mmc1_32khz_clk@4a009628 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a009628 0x4>; ++}; ++ ++sata_ref_clk: sata_ref_clk@4a009688 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_clkin>; ++ bit-shift = <8>; ++ reg = <0x4a009688 0x4>; ++}; ++ ++slimbus1_slimbus_clk: slimbus1_slimbus_clk@4a004560 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&slimbus_clk>; ++ bit-shift = <11>; ++ reg = <0x4a004560 0x4>; ++}; ++ ++usb_host_hs_hsic480m_p1_clk: usb_host_hs_hsic480m_p1_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ bit-shift = <13>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++usb_host_hs_hsic480m_p2_clk: usb_host_hs_hsic480m_p2_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ bit-shift = <14>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++usb_host_hs_hsic480m_p3_clk: usb_host_hs_hsic480m_p3_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_usb_m2_ck>; ++ bit-shift = <7>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++usb_host_hs_hsic60m_p1_clk: usb_host_hs_hsic60m_p1_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_60m_fclk>; ++ bit-shift = <11>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++usb_host_hs_hsic60m_p2_clk: usb_host_hs_hsic60m_p2_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_60m_fclk>; ++ bit-shift = <12>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++usb_host_hs_hsic60m_p3_clk: usb_host_hs_hsic60m_p3_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_60m_fclk>; ++ bit-shift = <6>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++utmi_p1_gfclk: utmi_p1_gfclk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&l3init_60m_fclk>, <&xclk60mhsp1_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009658 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++usb_host_hs_utmi_p1_clk: usb_host_hs_utmi_p1_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&utmi_p1_gfclk>; ++ bit-shift = <8>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++utmi_p2_gfclk: utmi_p2_gfclk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&l3init_60m_fclk>, <&xclk60mhsp2_ck>; ++ bit-shift = <25>; ++ reg = <0x4a009658 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++usb_host_hs_utmi_p2_clk: usb_host_hs_utmi_p2_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&utmi_p2_gfclk>; ++ bit-shift = <9>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++usb_host_hs_utmi_p3_clk: usb_host_hs_utmi_p3_clk@4a009658 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_60m_fclk>; ++ bit-shift = <10>; ++ reg = <0x4a009658 0x4>; ++}; ++ ++usb_otg_ss_refclk960m: usb_otg_ss_refclk960m@4a0096f0 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&dpll_usb_clkdcoldo>; ++ bit-shift = <8>; ++ reg = <0x4a0096f0 0x4>; ++}; ++ ++usb_phy_cm_clk32k: usb_phy_cm_clk32k@4a008640 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&sys_32k_ck>; ++ bit-shift = <8>; ++ reg = <0x4a008640 0x4>; ++}; ++ ++usb_tll_hs_usb_ch0_clk: usb_tll_hs_usb_ch0_clk@4a009668 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_60m_fclk>; ++ bit-shift = <8>; ++ reg = <0x4a009668 0x4>; ++}; ++ ++usb_tll_hs_usb_ch1_clk: usb_tll_hs_usb_ch1_clk@4a009668 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_60m_fclk>; ++ bit-shift = <9>; ++ reg = <0x4a009668 0x4>; ++}; ++ ++usb_tll_hs_usb_ch2_clk: usb_tll_hs_usb_ch2_clk@4a009668 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&l3init_60m_fclk>; ++ bit-shift = <10>; ++ reg = <0x4a009668 0x4>; ++}; ++ ++aess_fclk: aess_fclk@4a004528 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&abe_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004528 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++dmic_sync_mux_ck: dmic_sync_mux_ck@4a004538 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ++ bit-shift = <26>; ++ reg = <0x4a004538 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++dmic_gfclk: dmic_gfclk@4a004538 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dmic_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004538 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++fdif_fclk: fdif_fclk@4a009328 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_h11x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009328 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpu_core_gclk_mux: gpu_core_gclk_mux@4a009520 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009520 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++gpu_hyd_gclk_mux: gpu_hyd_gclk_mux@4a009520 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dpll_core_h14x2_ck>, <&dpll_per_h14x2_ck>; ++ bit-shift = <25>; ++ reg = <0x4a009520 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++hsi_fclk: hsi_fclk@4a009638 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009638 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mcasp_sync_mux_ck: mcasp_sync_mux_ck@4a004540 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ++ bit-shift = <26>; ++ reg = <0x4a004540 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcasp_gfclk: mcasp_gfclk@4a004540 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcasp_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004540 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp1_sync_mux_ck: mcbsp1_sync_mux_ck@4a004548 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ++ bit-shift = <26>; ++ reg = <0x4a004548 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp1_gfclk: mcbsp1_gfclk@4a004548 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcbsp1_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004548 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp2_sync_mux_ck: mcbsp2_sync_mux_ck@4a004550 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ++ bit-shift = <26>; ++ reg = <0x4a004550 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp2_gfclk: mcbsp2_gfclk@4a004550 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcbsp2_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004550 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp3_sync_mux_ck: mcbsp3_sync_mux_ck@4a004558 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&abe_24m_fclk>, <&dss_syc_gfclk_div>, <&func_24m_clk>; ++ bit-shift = <26>; ++ reg = <0x4a004558 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mcbsp3_gfclk: mcbsp3_gfclk@4a004558 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&mcbsp3_sync_mux_ck>, <&pad_clks_ck>, <&slimbus_clk>; ++ bit-shift = <24>; ++ reg = <0x4a004558 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++mmc1_fclk_mux: mmc1_fclk_mux@4a009628 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009628 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mmc1_fclk: mmc1_fclk@4a009628 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mmc1_fclk_mux>; ++ bit-shift = <25>; ++ reg = <0x4a009628 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mmc2_fclk_mux: mmc2_fclk_mux@4a009630 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&func_128m_clk>, <&dpll_per_m2x2_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009630 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++mmc2_fclk: mmc2_fclk@4a009630 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&mmc2_fclk_mux>; ++ bit-shift = <25>; ++ reg = <0x4a009630 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer10_gfclk_mux: timer10_gfclk_mux@4a009028 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009028 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer11_gfclk_mux: timer11_gfclk_mux@4a009030 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009030 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer1_gfclk_mux: timer1_gfclk_mux@4ae07940 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4ae07940 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer2_gfclk_mux: timer2_gfclk_mux@4a009038 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009038 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer3_gfclk_mux: timer3_gfclk_mux@4a009040 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009040 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer4_gfclk_mux: timer4_gfclk_mux@4a009048 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009048 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer5_gfclk_mux: timer5_gfclk_mux@4a004568 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004568 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer6_gfclk_mux: timer6_gfclk_mux@4a004570 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004570 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer7_gfclk_mux: timer7_gfclk_mux@4a004578 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004578 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer8_gfclk_mux: timer8_gfclk_mux@4a004580 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&dss_syc_gfclk_div>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a004580 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++timer9_gfclk_mux: timer9_gfclk_mux@4a009050 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&sys_32k_ck>; ++ bit-shift = <24>; ++ reg = <0x4a009050 0x4>; ++ bit-mask = <0x1>; ++}; ++ ++auxclk0_src_mux_ck: auxclk0_src_mux_ck@4ae0a310 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4ae0a310 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk0_src_ck: auxclk0_src_ck@4ae0a310 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk0_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4ae0a310 0x4>; ++}; ++ ++auxclk0_ck: auxclk0_ck@4ae0a310 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk0_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4ae0a310 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk1_src_mux_ck: auxclk1_src_mux_ck@4ae0a314 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4ae0a314 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk1_src_ck: auxclk1_src_ck@4ae0a314 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk1_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4ae0a314 0x4>; ++}; ++ ++auxclk1_ck: auxclk1_ck@4ae0a314 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk1_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4ae0a314 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk2_src_mux_ck: auxclk2_src_mux_ck@4ae0a318 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4ae0a318 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk2_src_ck: auxclk2_src_ck@4ae0a318 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk2_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4ae0a318 0x4>; ++}; ++ ++auxclk2_ck: auxclk2_ck@4ae0a318 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk2_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4ae0a318 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk3_src_mux_ck: auxclk3_src_mux_ck@4ae0a31c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4ae0a31c 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk3_src_ck: auxclk3_src_ck@4ae0a31c { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk3_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4ae0a31c 0x4>; ++}; ++ ++auxclk3_ck: auxclk3_ck@4ae0a31c { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk3_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4ae0a31c 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclk4_src_mux_ck: auxclk4_src_mux_ck@4ae0a320 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&sys_clkin>, <&dpll_core_m3x2_ck>, <&dpll_per_m3x2_ck>; ++ bit-shift = <1>; ++ reg = <0x4ae0a320 0x4>; ++ bit-mask = <0x3>; ++}; ++ ++auxclk4_src_ck: auxclk4_src_ck@4ae0a320 { ++ #clock-cells = <0>; ++ compatible = "gate-clock"; ++ clocks = <&auxclk4_src_mux_ck>; ++ bit-shift = <8>; ++ reg = <0x4ae0a320 0x4>; ++}; ++ ++auxclk4_ck: auxclk4_ck@4ae0a320 { ++ #clock-cells = <0>; ++ compatible = "divider-clock"; ++ clocks = <&auxclk4_src_ck>; ++ bit-shift = <16>; ++ reg = <0x4ae0a320 0x4>; ++ bit-mask = <0xf>; ++}; ++ ++auxclkreq0_ck: auxclkreq0_ck@4ae0a210 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ++ bit-shift = <2>; ++ reg = <0x4ae0a210 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq1_ck: auxclkreq1_ck@4ae0a214 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ++ bit-shift = <2>; ++ reg = <0x4ae0a214 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq2_ck: auxclkreq2_ck@4ae0a218 { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ++ bit-shift = <2>; ++ reg = <0x4ae0a218 0x4>; ++ bit-mask = <0x7>; ++}; ++ ++auxclkreq3_ck: auxclkreq3_ck@4ae0a21c { ++ #clock-cells = <0>; ++ compatible = "mux-clock"; ++ clocks = <&auxclk0_ck>, <&auxclk1_ck>, <&auxclk2_ck>, <&auxclk3_ck>, <&auxclk4_ck>; ++ bit-shift = <2>; ++ reg = <0x4ae0a21c 0x4>; ++ bit-mask = <0x7>; ++}; +--- a/arch/arm/boot/dts/omap5.dtsi ++++ b/arch/arm/boot/dts/omap5.dtsi +@@ -21,6 +21,11 @@ + interrupt-parent = <&gic>; + + aliases { ++ i2c0 = &i2c1; ++ i2c1 = &i2c2; ++ i2c2 = &i2c3; ++ i2c3 = &i2c4; ++ i2c4 = &i2c5; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; +@@ -33,10 +38,23 @@ + #address-cells = <1>; + #size-cells = <0>; + +- cpu@0 { ++ cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0x0>; ++ ++ operating-points = < ++ /* kHz uV */ ++ 500000 880000 ++ 1000000 1060000 ++ 1500000 1250000 ++ >; ++ ++ clocks = <&dpll_mpu_ck>; ++ clock-names = "cpu"; ++ ++ clock-latency = <300000>; /* From omap-cpufreq driver */ ++ + }; + cpu@1 { + device_type = "cpu"; +@@ -52,7 +70,6 @@ + , + , + ; +- clock-frequency = <6144000>; + }; + + gic: interrupt-controller@48211000 { +@@ -100,6 +117,8 @@ + compatible = "ti,omap-counter32k"; + reg = <0x4ae04000 0x40>; + ti,hwmods = "counter_32k"; ++ clocks = <&wkupaon_iclk_mux>; ++ clock-names = "fck"; + }; + + omap5_pmx_core: pinmux@4a002840 { +@@ -129,6 +148,8 @@ + #dma-cells = <1>; + #dma-channels = <32>; + #dma-requests = <127>; ++ clocks = <&l3_iclk_div>; ++ clock-names = "fck"; + }; + + gpio1: gpio@4ae10000 { +@@ -136,6 +157,8 @@ + reg = <0x4ae10000 0x200>; + interrupts = ; + ti,hwmods = "gpio1"; ++ clocks = <&wkupaon_iclk_mux>, <&gpio1_dbclk>; ++ clock-names = "fck", "dbclk"; + ti,gpio-always-on; + gpio-controller; + #gpio-cells = <2>; +@@ -148,6 +171,8 @@ + reg = <0x48055000 0x200>; + interrupts = ; + ti,hwmods = "gpio2"; ++ clocks = <&l4_root_clk_div>, <&gpio2_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -159,6 +184,8 @@ + reg = <0x48057000 0x200>; + interrupts = ; + ti,hwmods = "gpio3"; ++ clocks = <&l4_root_clk_div>, <&gpio3_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -170,6 +197,8 @@ + reg = <0x48059000 0x200>; + interrupts = ; + ti,hwmods = "gpio4"; ++ clocks = <&l4_root_clk_div>, <&gpio4_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -181,6 +210,8 @@ + reg = <0x4805b000 0x200>; + interrupts = ; + ti,hwmods = "gpio5"; ++ clocks = <&l4_root_clk_div>, <&gpio5_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -192,6 +223,8 @@ + reg = <0x4805d000 0x200>; + interrupts = ; + ti,hwmods = "gpio6"; ++ clocks = <&l4_root_clk_div>, <&gpio6_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -203,6 +236,8 @@ + reg = <0x48051000 0x200>; + interrupts = ; + ti,hwmods = "gpio7"; ++ clocks = <&l4_root_clk_div>, <&gpio7_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -214,6 +249,8 @@ + reg = <0x48053000 0x200>; + interrupts = ; + ti,hwmods = "gpio8"; ++ clocks = <&l4_root_clk_div>, <&gpio8_dbclk>; ++ clock-names = "fck", "dbclk"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; +@@ -238,6 +275,9 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; + }; + + i2c2: i2c@48072000 { +@@ -247,6 +287,9 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; + }; + + i2c3: i2c@48060000 { +@@ -256,6 +299,9 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; + }; + + i2c4: i2c@4807a000 { +@@ -265,6 +311,9 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; + }; + + i2c5: i2c@4807c000 { +@@ -274,6 +323,9 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; ++ status = "disabled"; + }; + + mcspi1: spi@48098000 { +@@ -283,6 +335,8 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi1"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <4>; + dmas = <&sdma 35>, + <&sdma 36>, +@@ -294,6 +348,7 @@ + <&sdma 42>; + dma-names = "tx0", "rx0", "tx1", "rx1", + "tx2", "rx2", "tx3", "rx3"; ++ status = "disabled"; + }; + + mcspi2: spi@4809a000 { +@@ -303,12 +358,15 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi2"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <2>; + dmas = <&sdma 43>, + <&sdma 44>, + <&sdma 45>, + <&sdma 46>; + dma-names = "tx0", "rx0", "tx1", "rx1"; ++ status = "disabled"; + }; + + mcspi3: spi@480b8000 { +@@ -318,9 +376,12 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi3"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <2>; + dmas = <&sdma 15>, <&sdma 16>; + dma-names = "tx0", "rx0"; ++ status = "disabled"; + }; + + mcspi4: spi@480ba000 { +@@ -330,9 +391,12 @@ + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "mcspi4"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,spi-num-cs = <1>; + dmas = <&sdma 70>, <&sdma 71>; + dma-names = "tx0", "rx0"; ++ status = "disabled"; + }; + + uart1: serial@4806a000 { +@@ -340,7 +404,10 @@ + reg = <0x4806a000 0x100>; + interrupts = ; + ti,hwmods = "uart1"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; ++ status = "disabled"; + }; + + uart2: serial@4806c000 { +@@ -348,7 +415,10 @@ + reg = <0x4806c000 0x100>; + interrupts = ; + ti,hwmods = "uart2"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; ++ status = "disabled"; + }; + + uart3: serial@48020000 { +@@ -356,7 +426,10 @@ + reg = <0x48020000 0x100>; + interrupts = ; + ti,hwmods = "uart3"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; ++ status = "disabled"; + }; + + uart4: serial@4806e000 { +@@ -364,7 +437,10 @@ + reg = <0x4806e000 0x100>; + interrupts = ; + ti,hwmods = "uart4"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; ++ status = "disabled"; + }; + + uart5: serial@48066000 { +@@ -372,7 +448,10 @@ + reg = <0x48066000 0x100>; + interrupts = ; + ti,hwmods = "uart5"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; ++ status = "disabled"; + }; + + uart6: serial@48068000 { +@@ -380,7 +459,10 @@ + reg = <0x48068000 0x100>; + interrupts = ; + ti,hwmods = "uart6"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + clock-frequency = <48000000>; ++ status = "disabled"; + }; + + mmc1: mmc@4809c000 { +@@ -388,6 +470,8 @@ + reg = <0x4809c000 0x400>; + interrupts = ; + ti,hwmods = "mmc1"; ++ clocks = <&mmc1_fclk>, <&mmc1_32khz_clk>; ++ clock-names = "fck", "32khz_clk"; + ti,dual-volt; + ti,needs-special-reset; + dmas = <&sdma 61>, <&sdma 62>; +@@ -399,6 +483,8 @@ + reg = <0x480b4000 0x400>; + interrupts = ; + ti,hwmods = "mmc2"; ++ clocks = <&mmc2_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 47>, <&sdma 48>; + dma-names = "tx", "rx"; +@@ -409,6 +495,8 @@ + reg = <0x480ad000 0x400>; + interrupts = ; + ti,hwmods = "mmc3"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 77>, <&sdma 78>; + dma-names = "tx", "rx"; +@@ -419,6 +507,8 @@ + reg = <0x480d1000 0x400>; + interrupts = ; + ti,hwmods = "mmc4"; ++ clocks = <&func_48m_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 57>, <&sdma 58>; + dma-names = "tx", "rx"; +@@ -429,15 +519,63 @@ + reg = <0x480d5000 0x400>; + interrupts = ; + ti,hwmods = "mmc5"; ++ clocks = <&func_96m_fclk>; ++ clock-names = "fck"; + ti,needs-special-reset; + dmas = <&sdma 59>, <&sdma 60>; + dma-names = "tx", "rx"; + }; + ++ omap_control_sata: control-phy@4a002374 { ++ compatible = "ti,control-phy-pipe3"; ++ reg = <0x4a002374 0x4>; ++ reg-names = "power"; ++ clocks = <&sys_clkin>; ++ clock-names = "sysclk"; ++ }; ++ ++ ocp2scp@4a090000 { ++ compatible = "ti,omap-ocp2scp"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ti,hwmods = "ocp2scp3"; ++ reg = <0x4a090000 0x1c>; /* ocp2scp3 */ ++ sata_phy: sata-phy@4A096000 { ++ compatible = "ti,phy-pipe3-sata"; ++ reg = <0x4A096000 0x80>, /* phy_rx */ ++ <0x4A096400 0x64>, /* phy_tx */ ++ <0x4A096800 0x40>; /* pll_ctrl */ ++ reg-names = "phy_rx", "phy_tx", "pll_ctrl"; ++ ctrl-module = <&omap_control_sata>; ++ #phy-cells = <0>; ++ clocks = <&sata_ref_clk>; ++ clock-names = "refclk"; ++ }; ++ }; ++ ++ sata@4a141100 { ++ compatible = "ti,sata"; ++ ti,hwmods = "sata"; ++ reg = <0x4a141100 0x100>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ sata@4a140000 { ++ compatible = "snps,dwc-ahci"; ++ reg = <0x4a140000 0x1100>; ++ interrupts = ; ++ phys = <&sata_phy>; ++ phy-names = "sata-phy"; ++ }; ++ }; ++ + keypad: keypad@4ae1c000 { + compatible = "ti,omap4-keypad"; + reg = <0x4ae1c000 0x400>; + ti,hwmods = "kbd"; ++ clocks = <&sys_32k_ck>; ++ clock-names = "fck"; + }; + + mcpdm: mcpdm@40132000 { +@@ -447,6 +585,8 @@ + reg-names = "mpu", "dma"; + interrupts = ; + ti,hwmods = "mcpdm"; ++ clocks = <&pad_clks_ck>; ++ clock-names = "fck"; + dmas = <&sdma 65>, + <&sdma 66>; + dma-names = "up_link", "dn_link"; +@@ -459,6 +599,8 @@ + reg-names = "mpu", "dma"; + interrupts = ; + ti,hwmods = "dmic"; ++ clocks = <&dmic_gfclk>; ++ clock-names = "fck"; + dmas = <&sdma 67>; + dma-names = "up_link"; + }; +@@ -472,6 +614,8 @@ + interrupt-names = "common"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; ++ clocks = <&mcbsp1_gfclk>, <&pad_clks_ck>, <&mcbsp1_sync_mux_ck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 33>, + <&sdma 34>; + dma-names = "tx", "rx"; +@@ -486,6 +630,8 @@ + interrupt-names = "common"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; ++ clocks = <&mcbsp2_gfclk>, <&pad_clks_ck>, <&mcbsp2_sync_mux_ck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 17>, + <&sdma 18>; + dma-names = "tx", "rx"; +@@ -500,16 +646,31 @@ + interrupt-names = "common"; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; ++ clocks = <&mcbsp3_gfclk>, <&pad_clks_ck>, <&mcbsp3_sync_mux_ck>; ++ clock-names = "fck", "pad_fck", "prcm_fck"; + dmas = <&sdma 19>, + <&sdma 20>; + dma-names = "tx", "rx"; + }; + ++ mailbox: mailbox@4a0f4000 { ++ compatible = "ti,omap4-mailbox"; ++ reg = <0x4a0f4000 0x200>; ++ interrupts = ; ++ ti,hwmods = "mailbox"; ++ ti,mbox-num-users = <3>; ++ ti,mbox-num-fifos = <8>; ++ ti,mbox-names = "mbox-ipu", "mbox-dsp"; ++ ti,mbox-data = <0 1 0 0>, <3 2 0 0>; ++ }; ++ + timer1: timer@4ae18000 { + compatible = "ti,omap5430-timer"; + reg = <0x4ae18000 0x80>; + interrupts = ; + ti,hwmods = "timer1"; ++ clocks = <&timer1_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-alwon; + }; + +@@ -518,6 +679,8 @@ + reg = <0x48032000 0x80>; + interrupts = ; + ti,hwmods = "timer2"; ++ clocks = <&timer2_gfclk_mux>; ++ clock-names = "fck"; + }; + + timer3: timer@48034000 { +@@ -525,6 +688,8 @@ + reg = <0x48034000 0x80>; + interrupts = ; + ti,hwmods = "timer3"; ++ clocks = <&timer3_gfclk_mux>; ++ clock-names = "fck"; + }; + + timer4: timer@48036000 { +@@ -532,6 +697,8 @@ + reg = <0x48036000 0x80>; + interrupts = ; + ti,hwmods = "timer4"; ++ clocks = <&timer4_gfclk_mux>; ++ clock-names = "fck"; + }; + + timer5: timer@40138000 { +@@ -540,6 +707,8 @@ + <0x49038000 0x80>; + interrupts = ; + ti,hwmods = "timer5"; ++ clocks = <&timer5_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-dsp; + ti,timer-pwm; + }; +@@ -550,6 +719,8 @@ + <0x4903a000 0x80>; + interrupts = ; + ti,hwmods = "timer6"; ++ clocks = <&timer6_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-dsp; + ti,timer-pwm; + }; +@@ -560,6 +731,8 @@ + <0x4903c000 0x80>; + interrupts = ; + ti,hwmods = "timer7"; ++ clocks = <&timer7_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-dsp; + }; + +@@ -569,6 +742,8 @@ + <0x4903e000 0x80>; + interrupts = ; + ti,hwmods = "timer8"; ++ clocks = <&timer8_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-dsp; + ti,timer-pwm; + }; +@@ -578,6 +753,8 @@ + reg = <0x4803e000 0x80>; + interrupts = ; + ti,hwmods = "timer9"; ++ clocks = <&timer9_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -586,6 +763,8 @@ + reg = <0x48086000 0x80>; + interrupts = ; + ti,hwmods = "timer10"; ++ clocks = <&timer10_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + +@@ -594,19 +773,33 @@ + reg = <0x48088000 0x80>; + interrupts = ; + ti,hwmods = "timer11"; ++ clocks = <&timer11_gfclk_mux>; ++ clock-names = "fck"; + ti,timer-pwm; + }; + + wdt2: wdt@4ae14000 { +- compatible = "ti,omap5-wdt", "ti,omap3-wdt"; ++ compatible = "ti,omap5-wdt", "ti,omap4-wdt"; + reg = <0x4ae14000 0x80>; + interrupts = ; + ti,hwmods = "wd_timer2"; ++ clocks = <&sys_32k_ck>; ++ clock-names = "fck"; ++ }; ++ ++ dmm: dmm@4e000000 { ++ compatible = "ti,omap5-dmm"; ++ reg = <0x4e000000 0x800>; ++ interrupts = <0 113 0x4>; ++ ti,hwmods = "dmm"; + }; + + emif1: emif@0x4c000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif1"; ++ ti,no-idle; ++ clocks = <&dpll_core_h11x2_ck>; ++ clock-names = "fck"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4c000000 0x400>; + interrupts = ; +@@ -618,6 +811,9 @@ + emif2: emif@0x4d000000 { + compatible = "ti,emif-4d5"; + ti,hwmods = "emif2"; ++ ti,no-idle; ++ clocks = <&dpll_core_h11x2_ck>; ++ clock-names = "fck"; + phy-type = <2>; /* DDR PHY type: Intelli PHY */ + reg = <0x4d000000 0x400>; + interrupts = ; +@@ -626,18 +822,25 @@ + hw-caps-temp-alert; + }; + +- omap_control_usb: omap-control-usb@4a002300 { +- compatible = "ti,omap-control-usb"; +- reg = <0x4a002300 0x4>, +- <0x4a002370 0x4>; +- reg-names = "control_dev_conf", "phy_power_usb"; +- ti,type = <2>; ++ omap_control_usb2phy: control-phy@4a002300 { ++ compatible = "ti,control-phy-usb2"; ++ reg = <0x4a002300 0x4>; ++ reg-names = "power"; ++ }; ++ ++ omap_control_usb3phy: control-phy@4a002370 { ++ compatible = "ti,control-phy-pipe3"; ++ reg = <0x4a002370 0x4>; ++ reg-names = "power"; + }; + +- omap_dwc3@4a020000 { ++ usb3: omap_dwc3@4a020000 { + compatible = "ti,dwc3"; + ti,hwmods = "usb_otg_ss"; ++ clocks = <&dpll_core_h13x2_ck>, <&usb_otg_ss_refclk960m>; ++ clock-names = "fck", "refclk960m"; + reg = <0x4a020000 0x10000>; ++ + interrupts = ; + #address-cells = <1>; + #size-cells = <1>; +@@ -647,7 +850,10 @@ + compatible = "snps,dwc3"; + reg = <0x4a030000 0x10000>; + interrupts = ; +- usb-phy = <&usb2_phy>, <&usb3_phy>; ++ phys = <&usb2_phy>, <&usb3_phy>; ++ phy-names = "usb2-phy", "usb3-phy"; ++ maximum-speed = "super-speed"; ++ dr_mode = "peripheral"; + tx-fifo-resize; + }; + }; +@@ -662,16 +868,26 @@ + usb2_phy: usb2phy@4a084000 { + compatible = "ti,omap-usb2"; + reg = <0x4a084000 0x7c>; +- ctrl-module = <&omap_control_usb>; ++ ctrl-module = <&omap_control_usb2phy>; ++ clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; ++ clock-names = "wkupclk", "refclk"; ++ #phy-cells = <0>; + }; + + usb3_phy: usb3phy@4a084400 { +- compatible = "ti,omap-usb3"; ++ compatible = "ti,phy-pipe3-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; +- ctrl-module = <&omap_control_usb>; ++ ctrl-module = <&omap_control_usb3phy>; ++ clocks = <&usb_phy_cm_clk32k>, ++ <&usb_otg_ss_refclk960m>, ++ <&dpll_core_h13x2_ck>; ++ clock-names = "wkupclk", ++ "refclk", ++ "refclk2"; ++ #phy-cells = <0>; + }; + }; + +@@ -689,6 +905,8 @@ + #address-cells = <1>; + #size-cells = <1>; + ranges; ++ clocks = <&l3init_60m_fclk>; ++ clock-names = "init_60m_fclk"; + + usbhsohci: ohci@4a064800 { + compatible = "ti,ohci-omap3", "usb-ohci"; +@@ -713,5 +931,71 @@ + interrupts = ; + compatible = "ti,omap5430-bandgap"; + }; ++ ++ dss@58000000 { ++ compatible = "ti,omap4-dss", "simple-bus"; ++ reg = <0x58000000 0x80>; ++ ti,hwmods = "dss_core"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ dispc@58001000 { ++ compatible = "ti,omap4-dispc"; ++ reg = <0x58001000 0x1000>; ++ interrupts = <0 25 0x4>; ++ ti,hwmods = "dss_dispc"; ++ }; ++ ++ dpi: encoder@0 { ++ compatible = "ti,omap4-dpi"; ++ }; ++ ++ rfbi: encoder@58002000 { ++ compatible = "ti,omap4-rfbi"; ++ reg = <0x58002000 0x1000>; ++ ti,hwmods = "dss_rfbi"; ++ }; ++ ++ dsi1: encoder@58004000 { ++ compatible = "ti,omap4-dsi"; ++ reg = <0x58004000 0x200>; ++ interrupts = <0 53 0x4>; ++ ti,hwmods = "dss_dsi1"; ++ }; ++ ++ dsi2: encoder@58005000 { ++ compatible = "ti,omap4-dsi"; ++ reg = <0x58005000 0x200>; ++ interrupts = <0 84 0x4>; ++ ti,hwmods = "dss_dsi2"; ++ }; ++ ++ hdmi: encoder@58060000 { ++ compatible = "ti,omap5-hdmi"; ++ reg = <0x58040000 0x200>, ++ <0x58040200 0x100>, ++ <0x58040300 0x100>, ++ <0x58060000 0x19000>; ++ reg-names = "hdmi_wp", "hdmi_pllctrl", ++ "hdmi_txphy", "hdmi_core"; ++ interrupts = <0 101 0x4>; ++ ti,hwmods = "dss_hdmi"; ++ }; ++ }; ++ }; ++ ++ clocks { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ /include/ "omap54xx-clocks.dtsi" ++ }; ++ ++ clockdomains { ++ l3init_clkdm: l3init_clkdm { ++ compatible = "ti,clockdomain"; ++ clocks = <&dpll_usb_ck>; ++ }; + }; + }; +--- a/arch/arm/boot/dts/omap5-uevm.dts ++++ b/arch/arm/boot/dts/omap5-uevm.dts +@@ -27,45 +27,19 @@ + regulator-max-microvolt = <3000000>; + }; + +- /* HS USB Port 2 RESET */ +- hsusb2_reset: hsusb2_reset_reg { +- compatible = "regulator-fixed"; +- regulator-name = "hsusb2_reset"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>; /* gpio3_80 HUB_NRESET */ +- startup-delay-us = <70000>; +- enable-active-high; +- }; +- + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; +- reset-supply = <&hsusb2_reset>; +- /** +- * FIXME +- * Put the right clock phandle here when available +- * clocks = <&auxclk1>; +- * clock-names = "main_clk"; +- */ ++ reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ ++ clocks = <&auxclk1_ck>; ++ clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + +- /* HS USB Port 3 RESET */ +- hsusb3_reset: hsusb3_reset_reg { +- compatible = "regulator-fixed"; +- regulator-name = "hsusb3_reset"; +- regulator-min-microvolt = <3300000>; +- regulator-max-microvolt = <3300000>; +- gpio = <&gpio3 15 GPIO_ACTIVE_HIGH>; /* gpio3_79 ETH_NRESET */ +- startup-delay-us = <70000>; +- enable-active-high; +- }; +- + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; +- reset-supply = <&hsusb3_reset>; ++ reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + }; + + leds { +@@ -77,6 +51,28 @@ + default-state = "off"; + }; + }; ++ ++ sound: sound { ++ compatible = "ti,abe-twl6040"; ++ ti,model = "omap5-uevm"; ++ ++ ti,mclk-freq = <19200000>; ++ ++ ti,mcpdm = <&mcpdm>; ++ ++ ti,twl6040 = <&twl6040>; ++ ++ /* Audio routing */ ++ ti,audio-routing = ++ "Headset Stereophone", "HSOL", ++ "Headset Stereophone", "HSOR", ++ "Line Out", "AUXL", ++ "Line Out", "AUXR", ++ "HSMIC", "Headset Mic", ++ "Headset Mic", "Headset Mic Bias", ++ "AFML", "Line In", ++ "AFMR", "Line In"; ++ }; + }; + + &omap5_pmx_core { +@@ -84,16 +80,18 @@ + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins +- &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + &usbhost_pins + &led_gpio_pins ++ &dss_hdmi_pins ++ &tpd12s015_pins ++ &palmas_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < +- 0x18a (PIN_OUTPUT | MUX_MODE6) /* perslimbus2_clock.gpio5_145 */ ++ 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; + }; + +@@ -107,15 +105,6 @@ + >; + }; + +- dmic_pins: pinmux_dmic_pins { +- pinctrl-single,pins = < +- 0x144 (PIN_INPUT | MUX_MODE0) /* abedmic_din1.abedmic_din1 */ +- 0x146 (PIN_INPUT | MUX_MODE0) /* abedmic_din2.abedmic_din2 */ +- 0x148 (PIN_INPUT | MUX_MODE0) /* abedmic_din3.abedmic_din3 */ +- 0x14a (PIN_OUTPUT | MUX_MODE0) /* abedmic_clk1.abedmic_clk1 */ +- >; +- }; +- + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ +@@ -143,8 +132,14 @@ + + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < +- 0x184 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ +- 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ ++ 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ ++ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ ++ >; ++ }; ++ ++ mmc1_pins: pinmux_mmc1_pins { ++ pinctrl-single,pins = < ++ 0x194 (PIN_INPUT | MUX_MODE6) /* gpio5_152 */ + >; + }; + +@@ -153,25 +148,25 @@ + 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ +- 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs */ ++ 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < +- 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ +- 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ +- 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ +- 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ ++ 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ ++ 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ ++ 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ ++ 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ + >; + }; + + mcspi4_pins: pinmux_mcspi4_pins { + pinctrl-single,pins = < +- 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi2_clk */ +- 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi2_simo */ +- 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi2_somi */ +- 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi2_cs */ ++ 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */ ++ 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */ ++ 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */ ++ 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */ + >; + }; + +@@ -219,6 +214,25 @@ + >; + }; + ++ dss_hdmi_pins: pinmux_dss_hdmi_pins { ++ pinctrl-single,pins = < ++ 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ ++ 0x100 (PIN_INPUT | MUX_MODE0) /* DDC-SCL */ ++ 0x102 (PIN_INPUT | MUX_MODE0) /* DDC-SDA */ ++ >; ++ }; ++ ++ tpd12s015_pins: pinmux_tpd12s015_pins { ++ pinctrl-single,pins = < ++ 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ ++ >; ++ }; ++ ++ palmas_pins: pinmux_palmas_pins { ++ pinctrl-single,pins = < ++ 0x140 (PIN_INPUT_PULLUP | MUX_MODE1) /* MSECURE */ ++ >; ++ }; + }; + + &omap5_pmx_wkup { +@@ -235,8 +249,11 @@ + }; + + &mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; ++ cd-gpios = <&gpio5 24 0>; /* gpio 152 */ + }; + + &mmc2 { +@@ -259,6 +276,7 @@ + }; + + &i2c1 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + +@@ -272,6 +290,30 @@ + interrupt-controller; + #interrupt-cells = <2>; + ++ extcon_usb3: palmas_usb { ++ compatible = "ti,palmas-usb-vid"; ++ ti,enable-vbus-detection; ++ ti,enable-id-detection; ++ ti,wakeup; ++ }; ++ ++ palmas_rtc: rtc { ++ compatible = "ti,palmas-rtc"; ++ interrupt-parent = <&palmas>; ++ interrupts = <8 IRQ_TYPE_NONE>; ++ ti,backup-battery-chargeable; ++ }; ++ ++ clk32kg: palmas_clk32k@0 { ++ compatible = "ti,palmas-clk32kg"; ++ #clock-cells = <0>; ++ }; ++ ++ clk32kgaudio: palmas_clk32k@1 { ++ compatible = "ti,palmas-clk32kgaudio"; ++ #clock-cells = <0>; ++ }; ++ + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; +@@ -334,15 +376,22 @@ + ti,smps-range = <0x80>; + }; + +- smps10_reg: smps10 { ++ smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ +- regulator-name = "smps10"; ++ regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + ++ smps10_out1_reg: smps10_out1 { ++ /* VBUS_5V_OTG */ ++ regulator-name = "smps10_out1"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ }; ++ + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; +@@ -448,13 +497,37 @@ + }; + }; + }; ++ ++ twl6040: twl@4b { ++ compatible = "ti,twl6040"; ++ reg = <0x4b>; ++ ++ interrupts = ; /* IRQ_SYS_2N cascaded to gic */ ++ interrupt-parent = <&gic>; ++ ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ ++ ++ vio-supply = <&smps7_reg>; ++ v2v1-supply = <&smps9_reg>; ++ enable-active-high; ++ ++ clocks = <&clk32kgaudio>; ++ clock-names = "clk32k"; ++ }; + }; + + &i2c5 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_pins>; + + clock-frequency = <400000>; ++ ++ tca6424a: tca6424a@22 { ++ compatible = "ti,tca6424"; ++ reg = <0x22>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; + }; + + &mcbsp3 { +@@ -470,36 +543,91 @@ + phys = <0 &hsusb2_phy &hsusb3_phy>; + }; + +-&mcspi1 { ++&usb3 { ++ extcon = <&extcon_usb3>; ++ vbus-supply = <&smps10_out1_reg>; ++}; + ++&mcspi1 { ++ status = "okay"; + }; + + &mcspi2 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; + }; + + &mcspi3 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; + }; + + &mcspi4 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mcspi4_pins>; + }; + + &uart1 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + }; + + &uart3 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + }; + + &uart5 { ++ status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; + }; ++ ++&hdmi { ++ vdda_hdmi_dac-supply = <&ldo4_reg>; ++}; ++ ++&dsi1 { ++ vdds_dsi-supply = <&ldo4_reg>; ++}; ++ ++&dsi2 { ++ vdds_dsi-supply = <&ldo4_reg>; ++}; ++ ++&cpu0 { ++ cpu0-supply = <&smps123_reg>; ++}; ++ ++/ { ++ aliases { ++ display0 = &hdmi0; ++ ethernet0 = &smsc0; ++ }; ++ ++ tpd12s015: encoder@0 { ++ compatible = "ti,tpd12s015"; ++ ++ video-source = <&hdmi>; ++ ++ gpios = <&tca6424a 0 0>, /* TCA6424A P01, CT CP HPD */ ++ <&tca6424a 1 0>, /* TCA6424A P00, LS OE */ ++ <&gpio7 1 0>; /* GPIO 193, HPD */ ++ }; ++ ++ hdmi0: connector@0 { ++ compatible = "ti,hdmi_connector"; ++ ++ video-source = <&tpd12s015>; ++ }; ++ ++ smsc0: smsc95xx@0 { ++ /* Filled in by U-Boot */ ++ mac-address = [ 00 00 00 00 00 00 ]; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/tps65218.dtsi +@@ -0,0 +1,41 @@ ++/* ++ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++&tps { ++ compatible = "ti,tps65218"; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ ++ dcdc1: regulator-dcdc1 { ++ compatible = "ti,tps65218-dcdc1"; ++ }; ++ ++ dcdc2: regulator-dcdc2 { ++ compatible = "ti,tps65218-dcdc2"; ++ }; ++ ++ dcdc3: regulator-dcdc3 { ++ compatible = "ti,tps65218-dcdc3"; ++ }; ++ ++ dcdc4: regulator-dcdc4 { ++ compatible = "ti,tps65218-dcdc4"; ++ }; ++ ++ dcdc5: regulator-dcdc5 { ++ compatible = "ti,tps65218-dcdc5"; ++ }; ++ ++ dcdc6: regulator-dcdc6 { ++ compatible = "ti,tps65218-dcdc6"; ++ }; ++ ++ ldo1: regulator-ldo1 { ++ compatible = "ti,tps65218-ldo1"; ++ }; ++}; +--- a/arch/arm/boot/dts/twl4030.dtsi ++++ b/arch/arm/boot/dts/twl4030.dtsi +@@ -86,6 +86,7 @@ + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; ++ #phy-cells = <0>; + }; + + twl_pwm: pwm { +--- a/arch/arm/boot/Makefile ++++ b/arch/arm/boot/Makefile +@@ -55,6 +55,9 @@ $(obj)/zImage: $(obj)/compressed/vmlinux + $(call if_changed,objcopy) + @$(kecho) ' Kernel: $@ is ready' + ++$(obj)/zImage-dtb.%: $(obj)/dts/%.dtb $(obj)/zImage ++ cat $(obj)/zImage $< > $@ ++ + endif + + ifneq ($(LOADADDR),) +@@ -80,6 +83,10 @@ $(obj)/uImage: $(obj)/zImage FORCE + $(call if_changed,uimage) + @$(kecho) ' Image $@ is ready' + ++$(obj)/uImage.%: $(obj)/zImage-dtb.% FORCE ++ $(call if_changed,uimage) ++ @echo ' Image $@ is ready' ++ + $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE + $(Q)$(MAKE) $(build)=$(obj)/bootp $@ + @: +--- a/arch/arm/configs/omap2plus_defconfig ++++ b/arch/arm/configs/omap2plus_defconfig +@@ -26,11 +26,13 @@ CONFIG_ARCH_OMAP2=y + CONFIG_ARCH_OMAP3=y + CONFIG_ARCH_OMAP4=y + CONFIG_SOC_AM33XX=y ++CONFIG_SOC_AM43XX=y + CONFIG_OMAP_RESET_CLOCKS=y + CONFIG_OMAP_MUX_DEBUG=y + CONFIG_ARCH_VEXPRESS_CA9X4=y + CONFIG_ARM_THUMBEE=y + CONFIG_ARM_ERRATA_411920=y ++CONFIG_OMAP4_ERRATA_I688=y + CONFIG_NO_HZ=y + CONFIG_HIGH_RES_TIMERS=y + CONFIG_SMP=y +@@ -42,6 +44,14 @@ CONFIG_ARM_APPENDED_DTB=y + CONFIG_ARM_ATAG_DTB_COMPAT=y + CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" + CONFIG_KEXEC=y ++CONFIG_CPU_FREQ=y ++CONFIG_CPU_FREQ_STAT_DETAILS=y ++CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y ++CONFIG_CPU_FREQ_GOV_POWERSAVE=y ++CONFIG_CPU_FREQ_GOV_USERSPACE=y ++CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y ++CONFIG_GENERIC_CPUFREQ_CPU0=y ++# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set + CONFIG_FPE_NWFPE=y + CONFIG_BINFMT_MISC=y + CONFIG_PM_DEBUG=y +@@ -60,6 +70,7 @@ CONFIG_IP_PNP_RARP=y + # CONFIG_INET_LRO is not set + # CONFIG_IPV6 is not set + CONFIG_NETFILTER=y ++CONFIG_VLAN_8021Q=y + CONFIG_CAN=m + CONFIG_CAN_RAW=m + CONFIG_CAN_BCM=m +@@ -82,6 +93,7 @@ CONFIG_DMA_CMA=y + CONFIG_CONNECTOR=y + CONFIG_DEVTMPFS=y + CONFIG_DEVTMPFS_MOUNT=y ++CONFIG_OMAP_OCP2SCP=y + CONFIG_MTD=y + CONFIG_MTD_CMDLINE_PARTS=y + CONFIG_MTD_CHAR=y +@@ -89,8 +101,11 @@ CONFIG_MTD_BLOCK=y + CONFIG_MTD_OOPS=y + CONFIG_MTD_CFI=y + CONFIG_MTD_CFI_INTELEXT=y ++CONFIG_MTD_M25P80=y ++# CONFIG_M25PXX_USE_FAST_READ is not set + CONFIG_MTD_NAND=y + CONFIG_MTD_NAND_OMAP2=y ++CONFIG_MTD_NAND_OMAP_BCH=y + CONFIG_MTD_ONENAND=y + CONFIG_MTD_ONENAND_VERIFY_WRITE=y + CONFIG_MTD_ONENAND_OMAP2=y +@@ -106,6 +121,9 @@ CONFIG_SCSI=y + CONFIG_BLK_DEV_SD=y + CONFIG_SCSI_MULTI_LUN=y + CONFIG_SCSI_SCAN_ASYNC=y ++CONFIG_ATA=y ++CONFIG_SATA_AHCI_PLATFORM=y ++CONFIG_SATA_TI=y + CONFIG_MD=y + CONFIG_NETDEVICES=y + CONFIG_SMSC_PHY=y +@@ -131,6 +149,9 @@ CONFIG_KEYBOARD_MATRIX=m + CONFIG_KEYBOARD_TWL4030=y + CONFIG_INPUT_TOUCHSCREEN=y + CONFIG_TOUCHSCREEN_ADS7846=y ++CONFIG_TOUCHSCREEN_ATMEL_MXT=y ++CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y ++CONFIG_TOUCHSCREEN_PIXCIR=m + CONFIG_INPUT_MISC=y + CONFIG_INPUT_TWL4030_PWRBUTTON=y + CONFIG_VT_HW_CONSOLE_BINDING=y +@@ -151,10 +172,14 @@ CONFIG_HW_RANDOM=y + CONFIG_I2C_CHARDEV=y + CONFIG_SPI=y + CONFIG_SPI_OMAP24XX=y ++CONFIG_SPI_TI_QSPI=y + CONFIG_PINCTRL_SINGLE=y + CONFIG_DEBUG_GPIO=y + CONFIG_GPIO_SYSFS=y + CONFIG_GPIO_TWL4030=y ++CONFIG_GPIOLIB=y ++CONFIG_I2C=y ++CONFIG_GPIO_PCF857X=y + CONFIG_W1=y + CONFIG_POWER_SUPPLY=y + CONFIG_SENSORS_LM75=m +@@ -168,31 +193,52 @@ CONFIG_THERMAL_GOV_USER_SPACE=y + CONFIG_CPU_THERMAL=y + CONFIG_OMAP_WATCHDOG=y + CONFIG_TWL4030_WATCHDOG=y ++CONFIG_MFD_TI_AM335X_TSCADC=y ++CONFIG_MFD_PALMAS=y + CONFIG_MFD_TPS65217=y + CONFIG_MFD_TPS65910=y + CONFIG_TWL6040_CORE=y + CONFIG_REGULATOR_TWL4030=y ++CONFIG_REGULATOR_TIAVSCLASS0=y + CONFIG_REGULATOR_TPS65023=y + CONFIG_REGULATOR_TPS6507X=y + CONFIG_REGULATOR_TPS65217=y + CONFIG_REGULATOR_TPS65910=y ++CONFIG_REGULATOR_PALMAS=y ++CONFIG_MEDIA_SUPPORT=m ++CONFIG_MEDIA_CAMERA_SUPPORT=y ++CONFIG_VIDEO_DEV=m ++CONFIG_VIDEO_V4L2=m ++CONFIG_VIDEOBUF2_CORE=m ++CONFIG_VIDEOBUF2_MEMOPS=m ++CONFIG_VIDEOBUF2_VMALLOC=m ++CONFIG_MEDIA_USB_SUPPORT=y ++CONFIG_USB_VIDEO_CLASS=m ++CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y ++CONFIG_USB_GSPCA=m + CONFIG_FB=y + CONFIG_FIRMWARE_EDID=y + CONFIG_FB_MODE_HELPERS=y + CONFIG_FB_TILEBLITTING=y + CONFIG_FB_OMAP_LCD_VGA=y +-CONFIG_OMAP2_DSS=m ++CONFIG_FB_DA8XX=y ++CONFIG_FB_DA8XX_TDA998X=y ++CONFIG_OMAP2_DSS=y + CONFIG_OMAP2_DSS_RFBI=y + CONFIG_OMAP2_DSS_SDI=y + CONFIG_OMAP2_DSS_DSI=y +-CONFIG_FB_OMAP2=m +-CONFIG_DISPLAY_ENCODER_TFP410=m +-CONFIG_DISPLAY_ENCODER_TPD12S015=m +-CONFIG_DISPLAY_CONNECTOR_DVI=m +-CONFIG_DISPLAY_CONNECTOR_HDMI=m +-CONFIG_DISPLAY_PANEL_DPI=m ++CONFIG_FB_OMAP2=y ++CONFIG_DISPLAY_ENCODER_TFP410=y ++CONFIG_DISPLAY_ENCODER_TPD12S015=y ++CONFIG_DISPLAY_DRA_EVM_ENCODER_TPD12S015=y ++CONFIG_DISPLAY_CONNECTOR_DVI=y ++CONFIG_DISPLAY_CONNECTOR_HDMI=y ++CONFIG_DISPLAY_PANEL_DPI=y ++CONFIG_DISPLAY_PANEL_TFCS9700=y + CONFIG_BACKLIGHT_LCD_SUPPORT=y + CONFIG_LCD_CLASS_DEVICE=y ++CONFIG_BACKLIGHT_CLASS_DEVICE=y ++CONFIG_BACKLIGHT_PWM=y + CONFIG_LCD_PLATFORM=y + CONFIG_DISPLAY_SUPPORT=y + CONFIG_FRAMEBUFFER_CONSOLE=y +@@ -210,25 +256,57 @@ CONFIG_SND_DEBUG=y + CONFIG_SND_USB_AUDIO=m + CONFIG_SND_SOC=m + CONFIG_SND_OMAP_SOC=m ++CONFIG_SND_AM33XX_SOC_EVM=m ++CONFIG_SND_DAVINCI_SOC=m + CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m + CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m + CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m + CONFIG_USB=y +-CONFIG_USB_DEBUG=y + CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + CONFIG_USB_DEVICEFS=y + CONFIG_USB_MON=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_PLATFORM=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_MUSB_HDRC=y ++CONFIG_USB_MUSB_OMAP2PLUS=m ++CONFIG_USB_MUSB_DSPS=m + CONFIG_USB_WDM=y + CONFIG_USB_STORAGE=y + CONFIG_USB_LIBUSUAL=y + CONFIG_USB_TEST=y ++CONFIG_AM335X_PHY_USB=y ++CONFIG_TWL6030_USB=y + CONFIG_USB_PHY=y + CONFIG_NOP_USB_XCEIV=y ++ ++CONFIG_USB_DWC3=y ++CONFIG_USB_DWC3_OMAP=y ++ + CONFIG_USB_GADGET=y + CONFIG_USB_GADGET_DEBUG=y + CONFIG_USB_GADGET_DEBUG_FILES=y + CONFIG_USB_GADGET_DEBUG_FS=y + CONFIG_USB_ZERO=m ++CONFIG_USB_AUDIO=m ++CONFIG_USB_ETH=m ++CONFIG_USB_G_NCM=m ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FUNCTIONFS=m ++CONFIG_USB_FUNCTIONFS_ETH=y ++CONFIG_USB_FUNCTIONFS_RNDIS=y ++CONFIG_USB_FUNCTIONFS_GENERIC=y ++CONFIG_USB_MASS_STORAGE=m ++CONFIG_USB_G_SERIAL=m ++CONFIG_USB_MIDI_GADGET=m ++CONFIG_USB_G_PRINTER=m ++CONFIG_USB_CDC_COMPOSITE=m ++CONFIG_USB_G_ACM_MS=m ++CONFIG_USB_G_MULTI=m ++CONFIG_USB_G_MULTI_CDC=y ++CONFIG_USB_G_HID=m ++CONFIG_USB_G_DBGP=m ++CONFIG_USB_G_WEBCAM=m + CONFIG_MMC=y + CONFIG_MMC_UNSAFE_RESUME=y + CONFIG_SDIO_UART=y +@@ -249,14 +327,35 @@ CONFIG_RTC_CLASS=y + CONFIG_RTC_DRV_TWL92330=y + CONFIG_RTC_DRV_TWL4030=y + CONFIG_RTC_DRV_OMAP=y ++CONFIG_RTC_DRV_PALMAS=y + CONFIG_DMADEVICES=y + CONFIG_TI_EDMA=y + CONFIG_DMA_OMAP=y ++CONFIG_PWM=y ++CONFIG_COMMON_CLK_DEBUG=y ++CONFIG_PWM_TIECAP=m ++CONFIG_PWM_TIEHRPWM=m + CONFIG_TI_SOC_THERMAL=y + CONFIG_TI_THERMAL=y + CONFIG_OMAP4_THERMAL=y + CONFIG_OMAP5_THERMAL=y + CONFIG_DRA752_THERMAL=y ++ ++CONFIG_EXTCON=y ++CONFIG_EXTCON_PALMAS=y ++CONFIG_EXTCON_GPIO_USBVID=y ++ ++CONFIG_GENERIC_PHY=y ++CONFIG_OMAP_CONTROL_PHY=y ++CONFIG_IIO=m ++CONFIG_IIO_BUFFER=y ++CONFIG_IIO_BUFFER_CB=y ++CONFIG_IIO_KFIFO_BUF=m ++CONFIG_TI_AM335X_ADC=m ++CONFIG_OMAP_USB2=y ++CONFIG_OMAP_PIPE3=y ++CONFIG_TWL4030_USB=y ++ + CONFIG_EXT2_FS=y + CONFIG_EXT3_FS=y + # CONFIG_EXT3_FS_XATTR is not set +@@ -295,6 +394,10 @@ CONFIG_DEBUG_INFO=y + CONFIG_SECURITY=y + CONFIG_CRYPTO_MICHAEL_MIC=y + # CONFIG_CRYPTO_ANSI_CPRNG is not set ++CONFIG_CRYPTO_DEV_OMAP_SHAM=y ++CONFIG_CRYPTO_DEV_OMAP_AES=y ++CONFIG_CRYPTO_DEV_OMAP_DES=y ++CONFIG_CRYPTO_TEST=m + CONFIG_CRC_CCITT=y + CONFIG_CRC_T10DIF=y + CONFIG_CRC_ITU_T=y +@@ -306,3 +409,4 @@ CONFIG_TI_DAVINCI_CPDMA=y + CONFIG_TI_CPSW=y + CONFIG_AT803X_PHY=y + CONFIG_SOC_DRA7XX=y ++CONFIG_GPIO_PCA953X=y +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -873,10 +873,33 @@ config ARCH_OMAP1 + help + Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx) + ++config ARCH_OMAP2PLUS ++ bool "TI OMAP2+" ++ depends on MMU ++ select ARCH_HAS_BANDGAP ++ select ARCH_HAS_CPUFREQ ++ select ARCH_HAS_HOLES_MEMORYMODEL ++ select ARCH_OMAP ++ select ARCH_REQUIRE_GPIOLIB ++ select CLKDEV_LOOKUP ++ select CLKSRC_MMIO ++ select GENERIC_CLOCKEVENTS ++ select GENERIC_IRQ_CHIP ++ select HAVE_CLK ++ select OMAP_DM_TIMER ++ select PINCTRL ++ select PROC_DEVICETREE if PROC_FS ++ select SOC_BUS ++ select SPARSE_IRQ ++ select TI_PRIV_EDMA ++ select USE_OF ++ select AUTO_ZRELADDR ++ help ++ SUpport for OMAP2, OMAP3, OMAP4 and OMAP5 ++ + endchoice + + menu "Multiple platform selection" +- depends on ARCH_MULTIPLATFORM + + comment "CPU Core family selection" + +@@ -1606,6 +1629,7 @@ config ARCH_NR_GPIO + default 352 if ARCH_VT8500 + default 288 if ARCH_SUNXI + default 264 if MACH_H4700 ++ default 192 if SOC_AM43XX + default 0 + help + Maximum number of GPIOs in the system. +--- a/arch/arm/Kconfig.debug ++++ b/arch/arm/Kconfig.debug +@@ -1077,7 +1077,7 @@ config DEBUG_UNCOMPRESS + + config UNCOMPRESS_INCLUDE + string +- default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM ++ default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_OMAP + default "mach/uncompress.h" + + config EARLY_PRINTK +--- a/arch/arm/kernel/head.S ++++ b/arch/arm/kernel/head.S +@@ -534,7 +534,8 @@ smp_on_up: + __do_fixup_smp_on_up: + cmp r4, r5 + movhs pc, lr +- ldmia r4!, {r0, r6} ++ ldmia r4!, {r0} ++ ldmia r4!, {r6} + ARM( str r6, [r0, r3] ) + THUMB( add r0, r0, r3 ) + #ifdef __ARMEB__ +--- a/arch/arm/mach-omap2/am33xx-restart.c ++++ b/arch/arm/mach-omap2/am33xx-restart.c +@@ -9,6 +9,7 @@ + #include + + #include "common.h" ++#include "prcm43xx.h" + #include "prm-regbits-33xx.h" + #include "prm33xx.h" + +@@ -33,3 +34,25 @@ void am33xx_restart(enum reboot_mode mod + (void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD, + AM33XX_PRM_RSTCTRL_OFFSET); + } ++ ++/** ++ * am43xx_restart - trigger a software restart of the SoC ++ * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c ++ * @cmd: passed fr-om the userspace program rebooting the system (if provided) ++ * ++ * Resets the SoC. For @cmd, see the 'reboot' syscall in ++ * kernel/sys.c. No return value. ++ */ ++void am43xx_restart(enum reboot_mode mode, const char *cmd) ++{ ++ /* TODO: Handle mode and cmd if necessary */ ++ ++ am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK, ++ AM33XX_RST_GLOBAL_WARM_SW_MASK, ++ AM43XX_PRM_DEVICE_INST, ++ AM33XX_PRM_RSTCTRL_OFFSET); ++ ++ /* OCP barrier */ ++ (void)am33xx_prm_read_reg(AM43XX_PRM_DEVICE_INST, ++ AM33XX_PRM_RSTCTRL_OFFSET); ++} +--- a/arch/arm/mach-omap2/board-2430sdp.c ++++ b/arch/arm/mach-omap2/board-2430sdp.c +@@ -246,7 +246,7 @@ static void __init omap_2430sdp_init(voi + omap_hsmmc_init(mmc); + + omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + + board_smc91x_init(); +--- a/arch/arm/mach-omap2/board-3430sdp.c ++++ b/arch/arm/mach-omap2/board-3430sdp.c +@@ -607,7 +607,7 @@ static void __init omap_3430sdp_init(voi + omap_ads7846_init(1, gpio_pendown, 310, NULL); + omap_serial_init(); + omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + board_smc91x_init(); + board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); +--- a/arch/arm/mach-omap2/board-cm-t35.c ++++ b/arch/arm/mach-omap2/board-cm-t35.c +@@ -725,7 +725,7 @@ static void __init cm_t3x_common_init(vo + cm_t35_init_display(); + omap_twl4030_audio_init("cm-t3x", NULL); + +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + cm_t35_init_usbh(); + cm_t35_init_camera(); +--- a/arch/arm/mach-omap2/board-devkit8000.c ++++ b/arch/arm/mach-omap2/board-devkit8000.c +@@ -628,7 +628,7 @@ static void __init devkit8000_init(void) + + omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); + +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + usbhs_init(&usbhs_bdata); + board_nand_init(devkit8000_nand_partitions, +--- a/arch/arm/mach-omap2/board-flash.c ++++ b/arch/arm/mach-omap2/board-flash.c +@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partit + board_nand_data.nr_parts = nr_parts; + board_nand_data.devsize = nand_type; + +- board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT; ++ board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW; + gpmc_nand_init(&board_nand_data, gpmc_t); + } + #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */ +--- a/arch/arm/mach-omap2/board-generic.c ++++ b/arch/arm/mach-omap2/board-generic.c +@@ -15,13 +15,11 @@ + #include + #include + #include +-#include + + #include + + #include "common.h" + #include "common-board-devices.h" +-#include "dss-common.h" + + #if !(defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)) + #define intc_of_init NULL +@@ -36,40 +34,13 @@ static struct of_device_id omap_dt_match + { } + }; + +-/* +- * Create alias for USB host PHY clock. +- * Remove this when clock phandle can be provided via DT +- */ +-static void __init legacy_init_ehci_clk(char *clkname) +-{ +- int ret; +- +- ret = clk_add_alias("main_clk", NULL, clkname, NULL); +- if (ret) { +- pr_err("%s:Failed to add main_clk alias to %s :%d\n", +- __func__, clkname, ret); +- } +-} +- + static void __init omap_generic_init(void) + { + omap_sdrc_init(NULL, NULL); + + of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); + +- /* +- * HACK: call display setup code for selected boards to enable omapdss. +- * This will be removed when omapdss supports DT. +- */ +- if (of_machine_is_compatible("ti,omap4-panda")) { +- omap4_panda_display_init_of(); +- legacy_init_ehci_clk("auxclk3_ck"); +- +- } +- else if (of_machine_is_compatible("ti,omap4-sdp")) +- omap_4430sdp_display_init_of(); +- else if (of_machine_is_compatible("ti,omap5-uevm")) +- legacy_init_ehci_clk("auxclk1_ck"); ++ omapdss_init_of(); + } + + #ifdef CONFIG_SOC_OMAP2420 +@@ -165,6 +136,24 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic O + .dt_compat = omap3_gp_boards_compat, + .restart = omap3xxx_restart, + MACHINE_END ++ ++static const char *omap3630_gp_boards_compat[] __initdata = { ++ "ti,omap3-beagle-xm", ++ NULL, ++}; ++ ++DT_MACHINE_START(OMAP3630_GP_DT, "Generic OMAP3630-GP (Flattened Device Tree)") ++ .reserve = omap_reserve, ++ .map_io = omap3_map_io, ++ .init_early = omap3630_init_early, ++ .init_irq = omap_intc_of_init, ++ .handle_irq = omap3_intc_handle_irq, ++ .init_machine = omap_generic_init, ++ .init_late = omap3_init_late, ++ .init_time = omap3_secure_sync32k_timer_init, ++ .dt_compat = omap3630_gp_boards_compat, ++ .restart = omap3xxx_restart, ++MACHINE_END + #endif + + #ifdef CONFIG_SOC_AM33XX +@@ -174,12 +163,14 @@ static const char *am33xx_boards_compat[ + }; + + DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") +- .reserve = omap_reserve, ++ .reserve = am33xx_reserve, + .map_io = am33xx_map_io, + .init_early = am33xx_init_early, ++ .init_late = am33xx_init_late, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, ++ .init_late = am33xx_init_late, + .init_time = omap3_gptimer_timer_init, + .dt_compat = am33xx_boards_compat, + .restart = am33xx_restart, +@@ -219,6 +210,7 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP + .init_early = omap5_init_early, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, ++ .init_late = omap5_init_late, + .init_time = omap5_realtime_timer_init, + .dt_compat = omap5_boards_compat, + .restart = omap44xx_restart, +@@ -232,12 +224,14 @@ static const char *am43_boards_compat[] + }; + + DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)") ++ .reserve = am33xx_reserve, + .map_io = am33xx_map_io, + .init_early = am43xx_init_early, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, + .init_time = omap3_sync32k_timer_init, + .dt_compat = am43_boards_compat, ++ .restart = am43xx_restart, + MACHINE_END + #endif + +@@ -254,6 +248,7 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA + .init_early = dra7xx_init_early, + .init_irq = omap_gic_of_init, + .init_machine = omap_generic_init, ++ .init_late = dra7xx_init_late, + .init_time = omap5_realtime_timer_init, + .dt_compat = dra7xx_boards_compat, + .restart = omap44xx_restart, +--- a/arch/arm/mach-omap2/board-igep0020.c ++++ b/arch/arm/mach-omap2/board-igep0020.c +@@ -667,7 +667,7 @@ static void __init igep_init(void) + omap_serial_init(); + omap_sdrc_init(m65kxxxxam_sdrc_params, + m65kxxxxam_sdrc_params); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + + igep_flash_init(); +--- a/arch/arm/mach-omap2/board-ldp.c ++++ b/arch/arm/mach-omap2/board-ldp.c +@@ -403,7 +403,7 @@ static void __init omap_ldp_init(void) + omap_ads7846_init(1, 54, 310, NULL); + omap_serial_init(); + omap_sdrc_init(NULL, NULL); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), + ZOOM_NAND_CS, 0, nand_default_timings); +--- a/arch/arm/mach-omap2/board-omap3beagle.c ++++ b/arch/arm/mach-omap2/board-omap3beagle.c +@@ -289,18 +289,12 @@ static struct regulator_consumer_supply + + static struct gpio_led gpio_leds[]; + +-/* PHY's VCC regulator might be added later, so flag that we need it */ +-static struct usb_phy_gen_xceiv_platform_data hsusb2_phy_data = { +- .needs_vcc = true, +-}; +- + static struct usbhs_phy_data phy_data[] = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ + .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ +- .platform_data = &hsusb2_phy_data, + }, + }; + +@@ -567,7 +561,7 @@ static void __init omap3_beagle_init(voi + omap_sdrc_init(mt46h32m32lf6_sdrc_params, + mt46h32m32lf6_sdrc_params); + +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + + usbhs_init(&usbhs_bdata); +--- a/arch/arm/mach-omap2/board-omap3evm.c ++++ b/arch/arm/mach-omap2/board-omap3evm.c +@@ -723,7 +723,7 @@ static void __init omap3_evm_init(void) + omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); + phy_data[0].reset_gpio = 135; + } +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(&musb_board_data); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); +--- a/arch/arm/mach-omap2/board-omap3logic.c ++++ b/arch/arm/mach-omap2/board-omap3logic.c +@@ -216,7 +216,7 @@ static void __init omap3logic_init(void) + board_mmc_init(); + board_smsc911x_init(); + +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + + /* Ensure SDRC pins are mux'd for self-refresh */ +--- a/arch/arm/mach-omap2/board-omap3pandora.c ++++ b/arch/arm/mach-omap2/board-omap3pandora.c +@@ -607,7 +607,7 @@ static void __init omap3pandora_init(voi + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); + usbhs_init(&usbhs_bdata); + +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + gpmc_nand_init(&pandora_nand_data, NULL); + +--- a/arch/arm/mach-omap2/board-omap3stalker.c ++++ b/arch/arm/mach-omap2/board-omap3stalker.c +@@ -407,7 +407,7 @@ static void __init omap3_stalker_init(vo + + omap_serial_init(); + omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); +--- a/arch/arm/mach-omap2/board-omap3touchbook.c ++++ b/arch/arm/mach-omap2/board-omap3touchbook.c +@@ -367,7 +367,7 @@ static void __init omap3_touchbook_init( + + /* Touchscreen and accelerometer */ + omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); +--- a/arch/arm/mach-omap2/board-overo.c ++++ b/arch/arm/mach-omap2/board-overo.c +@@ -511,7 +511,7 @@ static void __init overo_init(void) + mt46h32m32lf6_sdrc_params); + board_nand_init(overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); +--- a/arch/arm/mach-omap2/board-rm680.c ++++ b/arch/arm/mach-omap2/board-rm680.c +@@ -135,7 +135,7 @@ static void __init rm680_init(void) + sdrc_params = nokia_get_sdram_timings(); + omap_sdrc_init(sdrc_params, sdrc_params); + +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + rm680_peripherals_init(); + } +--- a/arch/arm/mach-omap2/board-rx51.c ++++ b/arch/arm/mach-omap2/board-rx51.c +@@ -99,7 +99,7 @@ static void __init rx51_init(void) + sdrc_params = nokia_get_sdram_timings(); + omap_sdrc_init(sdrc_params, sdrc_params); + +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(&musb_board_data); + rx51_peripherals_init(); + +--- a/arch/arm/mach-omap2/board-zoom-peripherals.c ++++ b/arch/arm/mach-omap2/board-zoom-peripherals.c +@@ -353,7 +353,7 @@ void __init zoom_peripherals_init(void) + omap_i2c_init(); + pwm_add_table(zoom_pwm_lookup, ARRAY_SIZE(zoom_pwm_lookup)); + platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices)); +- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); ++ usb_bind_phy("musb-hdrc.0", 0, "twl4030_usb"); + usb_musb_init(NULL); + enable_board_wakeup_source(); + omap_serial_init(); +--- a/arch/arm/mach-omap2/cclock33xx_data.c ++++ /dev/null +@@ -1,1064 +0,0 @@ +-/* +- * AM33XX Clock data +- * +- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ +- * Vaibhav Hiremath +- * +- * This program is free software; you can redistribute it and/or +- * modify it under the terms of the GNU General Public License as +- * published by the Free Software Foundation version 2. +- * +- * This program is distributed "as is" WITHOUT ANY WARRANTY of any +- * kind, whether express or implied; without even the implied warranty +- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +- * GNU General Public License for more details. +- */ +- +-#include +-#include +-#include +-#include +-#include +- +-#include "am33xx.h" +-#include "soc.h" +-#include "iomap.h" +-#include "clock.h" +-#include "control.h" +-#include "cm.h" +-#include "cm33xx.h" +-#include "cm-regbits-33xx.h" +-#include "prm.h" +- +-/* Modulemode control */ +-#define AM33XX_MODULEMODE_HWCTRL_SHIFT 0 +-#define AM33XX_MODULEMODE_SWCTRL_SHIFT 1 +- +-/*LIST_HEAD(clocks);*/ +- +-/* Root clocks */ +- +-/* RTC 32k */ +-DEFINE_CLK_FIXED_RATE(clk_32768_ck, CLK_IS_ROOT, 32768, 0x0); +- +-/* On-Chip 32KHz RC OSC */ +-DEFINE_CLK_FIXED_RATE(clk_rc32k_ck, CLK_IS_ROOT, 32000, 0x0); +- +-/* Crystal input clks */ +-DEFINE_CLK_FIXED_RATE(virt_19200000_ck, CLK_IS_ROOT, 19200000, 0x0); +- +-DEFINE_CLK_FIXED_RATE(virt_24000000_ck, CLK_IS_ROOT, 24000000, 0x0); +- +-DEFINE_CLK_FIXED_RATE(virt_25000000_ck, CLK_IS_ROOT, 25000000, 0x0); +- +-DEFINE_CLK_FIXED_RATE(virt_26000000_ck, CLK_IS_ROOT, 26000000, 0x0); +- +-/* Oscillator clock */ +-/* 19.2, 24, 25 or 26 MHz */ +-static const char *sys_clkin_ck_parents[] = { +- "virt_19200000_ck", "virt_24000000_ck", "virt_25000000_ck", +- "virt_26000000_ck", +-}; +- +-/* +- * sys_clk in: input to the dpll and also used as funtional clock for, +- * adc_tsc, smartreflex0-1, timer1-7, mcasp0-1, dcan0-1, cefuse +- * +- */ +-DEFINE_CLK_MUX(sys_clkin_ck, sys_clkin_ck_parents, NULL, 0x0, +- AM33XX_CTRL_REGADDR(AM33XX_CONTROL_STATUS), +- AM33XX_CONTROL_STATUS_SYSBOOT1_SHIFT, +- AM33XX_CONTROL_STATUS_SYSBOOT1_WIDTH, +- 0, NULL); +- +-/* External clock - 12 MHz */ +-DEFINE_CLK_FIXED_RATE(tclkin_ck, CLK_IS_ROOT, 12000000, 0x0); +- +-/* Module clocks and DPLL outputs */ +- +-/* DPLL_CORE */ +-static struct dpll_data dpll_core_dd = { +- .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_CORE, +- .clk_bypass = &sys_clkin_ck, +- .clk_ref = &sys_clkin_ck, +- .control_reg = AM33XX_CM_CLKMODE_DPLL_CORE, +- .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), +- .idlest_reg = AM33XX_CM_IDLEST_DPLL_CORE, +- .mult_mask = AM33XX_DPLL_MULT_MASK, +- .div1_mask = AM33XX_DPLL_DIV_MASK, +- .enable_mask = AM33XX_DPLL_EN_MASK, +- .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, +- .max_multiplier = 2047, +- .max_divider = 128, +- .min_divider = 1, +-}; +- +-/* CLKDCOLDO output */ +-static const char *dpll_core_ck_parents[] = { +- "sys_clkin_ck", +-}; +- +-static struct clk dpll_core_ck; +- +-static const struct clk_ops dpll_core_ck_ops = { +- .recalc_rate = &omap3_dpll_recalc, +- .get_parent = &omap2_init_dpll_parent, +-}; +- +-static struct clk_hw_omap dpll_core_ck_hw = { +- .hw = { +- .clk = &dpll_core_ck, +- }, +- .dpll_data = &dpll_core_dd, +- .ops = &clkhwops_omap3_dpll, +-}; +- +-DEFINE_STRUCT_CLK(dpll_core_ck, dpll_core_ck_parents, dpll_core_ck_ops); +- +-static const char *dpll_core_x2_ck_parents[] = { +- "dpll_core_ck", +-}; +- +-static struct clk dpll_core_x2_ck; +- +-static const struct clk_ops dpll_x2_ck_ops = { +- .recalc_rate = &omap3_clkoutx2_recalc, +-}; +- +-static struct clk_hw_omap dpll_core_x2_ck_hw = { +- .hw = { +- .clk = &dpll_core_x2_ck, +- }, +- .flags = CLOCK_CLKOUTX2, +-}; +- +-DEFINE_STRUCT_CLK(dpll_core_x2_ck, dpll_core_x2_ck_parents, dpll_x2_ck_ops); +- +-DEFINE_CLK_DIVIDER(dpll_core_m4_ck, "dpll_core_x2_ck", &dpll_core_x2_ck, +- 0x0, AM33XX_CM_DIV_M4_DPLL_CORE, +- AM33XX_HSDIVIDER_CLKOUT1_DIV_SHIFT, +- AM33XX_HSDIVIDER_CLKOUT1_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, +- NULL); +- +-DEFINE_CLK_DIVIDER(dpll_core_m5_ck, "dpll_core_x2_ck", &dpll_core_x2_ck, +- 0x0, AM33XX_CM_DIV_M5_DPLL_CORE, +- AM33XX_HSDIVIDER_CLKOUT2_DIV_SHIFT, +- AM33XX_HSDIVIDER_CLKOUT2_DIV_WIDTH, +- CLK_DIVIDER_ONE_BASED, NULL); +- +-DEFINE_CLK_DIVIDER(dpll_core_m6_ck, "dpll_core_x2_ck", &dpll_core_x2_ck, +- 0x0, AM33XX_CM_DIV_M6_DPLL_CORE, +- AM33XX_HSDIVIDER_CLKOUT3_DIV_SHIFT, +- AM33XX_HSDIVIDER_CLKOUT3_DIV_WIDTH, +- CLK_DIVIDER_ONE_BASED, NULL); +- +- +-/* DPLL_MPU */ +-static struct dpll_data dpll_mpu_dd = { +- .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_MPU, +- .clk_bypass = &sys_clkin_ck, +- .clk_ref = &sys_clkin_ck, +- .control_reg = AM33XX_CM_CLKMODE_DPLL_MPU, +- .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), +- .idlest_reg = AM33XX_CM_IDLEST_DPLL_MPU, +- .mult_mask = AM33XX_DPLL_MULT_MASK, +- .div1_mask = AM33XX_DPLL_DIV_MASK, +- .enable_mask = AM33XX_DPLL_EN_MASK, +- .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, +- .max_multiplier = 2047, +- .max_divider = 128, +- .min_divider = 1, +-}; +- +-/* CLKOUT: fdpll/M2 */ +-static struct clk dpll_mpu_ck; +- +-static const struct clk_ops dpll_mpu_ck_ops = { +- .enable = &omap3_noncore_dpll_enable, +- .disable = &omap3_noncore_dpll_disable, +- .recalc_rate = &omap3_dpll_recalc, +- .round_rate = &omap2_dpll_round_rate, +- .set_rate = &omap3_noncore_dpll_set_rate, +- .get_parent = &omap2_init_dpll_parent, +-}; +- +-static struct clk_hw_omap dpll_mpu_ck_hw = { +- .hw = { +- .clk = &dpll_mpu_ck, +- }, +- .dpll_data = &dpll_mpu_dd, +- .ops = &clkhwops_omap3_dpll, +-}; +- +-DEFINE_STRUCT_CLK(dpll_mpu_ck, dpll_core_ck_parents, dpll_mpu_ck_ops); +- +-/* +- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 +- * and ALT_CLK1/2) +- */ +-DEFINE_CLK_DIVIDER(dpll_mpu_m2_ck, "dpll_mpu_ck", &dpll_mpu_ck, +- 0x0, AM33XX_CM_DIV_M2_DPLL_MPU, AM33XX_DPLL_CLKOUT_DIV_SHIFT, +- AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, NULL); +- +-/* DPLL_DDR */ +-static struct dpll_data dpll_ddr_dd = { +- .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DDR, +- .clk_bypass = &sys_clkin_ck, +- .clk_ref = &sys_clkin_ck, +- .control_reg = AM33XX_CM_CLKMODE_DPLL_DDR, +- .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), +- .idlest_reg = AM33XX_CM_IDLEST_DPLL_DDR, +- .mult_mask = AM33XX_DPLL_MULT_MASK, +- .div1_mask = AM33XX_DPLL_DIV_MASK, +- .enable_mask = AM33XX_DPLL_EN_MASK, +- .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, +- .max_multiplier = 2047, +- .max_divider = 128, +- .min_divider = 1, +-}; +- +-/* CLKOUT: fdpll/M2 */ +-static struct clk dpll_ddr_ck; +- +-static const struct clk_ops dpll_ddr_ck_ops = { +- .recalc_rate = &omap3_dpll_recalc, +- .get_parent = &omap2_init_dpll_parent, +- .round_rate = &omap2_dpll_round_rate, +- .set_rate = &omap3_noncore_dpll_set_rate, +-}; +- +-static struct clk_hw_omap dpll_ddr_ck_hw = { +- .hw = { +- .clk = &dpll_ddr_ck, +- }, +- .dpll_data = &dpll_ddr_dd, +- .ops = &clkhwops_omap3_dpll, +-}; +- +-DEFINE_STRUCT_CLK(dpll_ddr_ck, dpll_core_ck_parents, dpll_ddr_ck_ops); +- +-/* +- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 +- * and ALT_CLK1/2) +- */ +-DEFINE_CLK_DIVIDER(dpll_ddr_m2_ck, "dpll_ddr_ck", &dpll_ddr_ck, +- 0x0, AM33XX_CM_DIV_M2_DPLL_DDR, +- AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH, +- CLK_DIVIDER_ONE_BASED, NULL); +- +-/* emif_fck functional clock */ +-DEFINE_CLK_FIXED_FACTOR(dpll_ddr_m2_div2_ck, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck, +- 0x0, 1, 2); +- +-/* DPLL_DISP */ +-static struct dpll_data dpll_disp_dd = { +- .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_DISP, +- .clk_bypass = &sys_clkin_ck, +- .clk_ref = &sys_clkin_ck, +- .control_reg = AM33XX_CM_CLKMODE_DPLL_DISP, +- .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), +- .idlest_reg = AM33XX_CM_IDLEST_DPLL_DISP, +- .mult_mask = AM33XX_DPLL_MULT_MASK, +- .div1_mask = AM33XX_DPLL_DIV_MASK, +- .enable_mask = AM33XX_DPLL_EN_MASK, +- .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, +- .max_multiplier = 2047, +- .max_divider = 128, +- .min_divider = 1, +-}; +- +-/* CLKOUT: fdpll/M2 */ +-static struct clk dpll_disp_ck; +- +-static struct clk_hw_omap dpll_disp_ck_hw = { +- .hw = { +- .clk = &dpll_disp_ck, +- }, +- .dpll_data = &dpll_disp_dd, +- .ops = &clkhwops_omap3_dpll, +-}; +- +-DEFINE_STRUCT_CLK(dpll_disp_ck, dpll_core_ck_parents, dpll_ddr_ck_ops); +- +-/* +- * TODO: Add clksel here (sys_clkin, CORE_CLKOUTM6, PER_CLKOUTM2 +- * and ALT_CLK1/2) +- */ +-DEFINE_CLK_DIVIDER(dpll_disp_m2_ck, "dpll_disp_ck", &dpll_disp_ck, +- CLK_SET_RATE_PARENT, AM33XX_CM_DIV_M2_DPLL_DISP, +- AM33XX_DPLL_CLKOUT_DIV_SHIFT, AM33XX_DPLL_CLKOUT_DIV_WIDTH, +- CLK_DIVIDER_ONE_BASED, NULL); +- +-/* DPLL_PER */ +-static struct dpll_data dpll_per_dd = { +- .mult_div1_reg = AM33XX_CM_CLKSEL_DPLL_PERIPH, +- .clk_bypass = &sys_clkin_ck, +- .clk_ref = &sys_clkin_ck, +- .control_reg = AM33XX_CM_CLKMODE_DPLL_PER, +- .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), +- .idlest_reg = AM33XX_CM_IDLEST_DPLL_PER, +- .mult_mask = AM33XX_DPLL_MULT_PERIPH_MASK, +- .div1_mask = AM33XX_DPLL_PER_DIV_MASK, +- .enable_mask = AM33XX_DPLL_EN_MASK, +- .idlest_mask = AM33XX_ST_DPLL_CLK_MASK, +- .max_multiplier = 2047, +- .max_divider = 128, +- .min_divider = 1, +- .flags = DPLL_J_TYPE, +-}; +- +-/* CLKDCOLDO */ +-static struct clk dpll_per_ck; +- +-static struct clk_hw_omap dpll_per_ck_hw = { +- .hw = { +- .clk = &dpll_per_ck, +- }, +- .dpll_data = &dpll_per_dd, +- .ops = &clkhwops_omap3_dpll, +-}; +- +-DEFINE_STRUCT_CLK(dpll_per_ck, dpll_core_ck_parents, dpll_ddr_ck_ops); +- +-/* CLKOUT: fdpll/M2 */ +-DEFINE_CLK_DIVIDER(dpll_per_m2_ck, "dpll_per_ck", &dpll_per_ck, 0x0, +- AM33XX_CM_DIV_M2_DPLL_PER, AM33XX_DPLL_CLKOUT_DIV_SHIFT, +- AM33XX_DPLL_CLKOUT_DIV_WIDTH, CLK_DIVIDER_ONE_BASED, +- NULL); +- +-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_wkupdm_ck, "dpll_per_m2_ck", +- &dpll_per_m2_ck, 0x0, 1, 4); +- +-DEFINE_CLK_FIXED_FACTOR(dpll_per_m2_div4_ck, "dpll_per_m2_ck", +- &dpll_per_m2_ck, 0x0, 1, 4); +- +-DEFINE_CLK_FIXED_FACTOR(dpll_core_m4_div2_ck, "dpll_core_m4_ck", +- &dpll_core_m4_ck, 0x0, 1, 2); +- +-DEFINE_CLK_FIXED_FACTOR(l4_rtc_gclk, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0, +- 1, 2); +- +-DEFINE_CLK_FIXED_FACTOR(clk_24mhz, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, +- 8); +- +-/* +- * Below clock nodes describes clockdomains derived out +- * of core clock. +- */ +-static const struct clk_ops clk_ops_null = { +-}; +- +-static const char *l3_gclk_parents[] = { +- "dpll_core_m4_ck" +-}; +- +-static struct clk l3_gclk; +-DEFINE_STRUCT_CLK_HW_OMAP(l3_gclk, NULL); +-DEFINE_STRUCT_CLK(l3_gclk, l3_gclk_parents, clk_ops_null); +- +-static struct clk l4hs_gclk; +-DEFINE_STRUCT_CLK_HW_OMAP(l4hs_gclk, NULL); +-DEFINE_STRUCT_CLK(l4hs_gclk, l3_gclk_parents, clk_ops_null); +- +-static const char *l3s_gclk_parents[] = { +- "dpll_core_m4_div2_ck" +-}; +- +-static struct clk l3s_gclk; +-DEFINE_STRUCT_CLK_HW_OMAP(l3s_gclk, NULL); +-DEFINE_STRUCT_CLK(l3s_gclk, l3s_gclk_parents, clk_ops_null); +- +-static struct clk l4fw_gclk; +-DEFINE_STRUCT_CLK_HW_OMAP(l4fw_gclk, NULL); +-DEFINE_STRUCT_CLK(l4fw_gclk, l3s_gclk_parents, clk_ops_null); +- +-static struct clk l4ls_gclk; +-DEFINE_STRUCT_CLK_HW_OMAP(l4ls_gclk, NULL); +-DEFINE_STRUCT_CLK(l4ls_gclk, l3s_gclk_parents, clk_ops_null); +- +-static struct clk sysclk_div_ck; +-DEFINE_STRUCT_CLK_HW_OMAP(sysclk_div_ck, NULL); +-DEFINE_STRUCT_CLK(sysclk_div_ck, l3_gclk_parents, clk_ops_null); +- +-/* +- * In order to match the clock domain with hwmod clockdomain entry, +- * separate clock nodes is required for the modules which are +- * directly getting their funtioncal clock from sys_clkin. +- */ +-static struct clk adc_tsc_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(adc_tsc_fck, NULL); +-DEFINE_STRUCT_CLK(adc_tsc_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk dcan0_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(dcan0_fck, NULL); +-DEFINE_STRUCT_CLK(dcan0_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk dcan1_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(dcan1_fck, NULL); +-DEFINE_STRUCT_CLK(dcan1_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk mcasp0_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(mcasp0_fck, NULL); +-DEFINE_STRUCT_CLK(mcasp0_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk mcasp1_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(mcasp1_fck, NULL); +-DEFINE_STRUCT_CLK(mcasp1_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk smartreflex0_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex0_fck, NULL); +-DEFINE_STRUCT_CLK(smartreflex0_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk smartreflex1_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(smartreflex1_fck, NULL); +-DEFINE_STRUCT_CLK(smartreflex1_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk sha0_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(sha0_fck, NULL); +-DEFINE_STRUCT_CLK(sha0_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk aes0_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(aes0_fck, NULL); +-DEFINE_STRUCT_CLK(aes0_fck, dpll_core_ck_parents, clk_ops_null); +- +-static struct clk rng_fck; +-DEFINE_STRUCT_CLK_HW_OMAP(rng_fck, NULL); +-DEFINE_STRUCT_CLK(rng_fck, dpll_core_ck_parents, clk_ops_null); +- +-/* +- * Modules clock nodes +- * +- * The following clock leaf nodes are added for the moment because: +- * +- * - hwmod data is not present for these modules, either hwmod +- * control is not required or its not populated. +- * - Driver code is not yet migrated to use hwmod/runtime pm +- * - Modules outside kernel access (to disable them by default) +- * +- * - mmu (gfx domain) +- * - cefuse +- * - usbotg_fck (its additional clock and not really a modulemode) +- * - ieee5000 +- */ +- +-DEFINE_CLK_GATE(mmu_fck, "dpll_core_m4_ck", &dpll_core_m4_ck, 0x0, +- AM33XX_CM_GFX_MMUDATA_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, +- 0x0, NULL); +- +-DEFINE_CLK_GATE(cefuse_fck, "sys_clkin_ck", &sys_clkin_ck, 0x0, +- AM33XX_CM_CEFUSE_CEFUSE_CLKCTRL, AM33XX_MODULEMODE_SWCTRL_SHIFT, +- 0x0, NULL); +- +-/* +- * clkdiv32 is generated from fixed division of 732.4219 +- */ +-DEFINE_CLK_FIXED_FACTOR(clkdiv32k_ck, "clk_24mhz", &clk_24mhz, 0x0, 1, 732); +- +-static struct clk clkdiv32k_ick; +- +-static const char *clkdiv32k_ick_parent_names[] = { +- "clkdiv32k_ck", +-}; +- +-static const struct clk_ops clkdiv32k_ick_ops = { +- .enable = &omap2_dflt_clk_enable, +- .disable = &omap2_dflt_clk_disable, +- .is_enabled = &omap2_dflt_clk_is_enabled, +- .init = &omap2_init_clk_clkdm, +-}; +- +-static struct clk_hw_omap clkdiv32k_ick_hw = { +- .hw = { +- .clk = &clkdiv32k_ick, +- }, +- .enable_reg = AM33XX_CM_PER_CLKDIV32K_CLKCTRL, +- .enable_bit = AM33XX_MODULEMODE_SWCTRL_SHIFT, +- .clkdm_name = "clk_24mhz_clkdm", +-}; +- +-DEFINE_STRUCT_CLK(clkdiv32k_ick, clkdiv32k_ick_parent_names, clkdiv32k_ick_ops); +- +-/* "usbotg_fck" is an additional clock and not really a modulemode */ +-DEFINE_CLK_GATE(usbotg_fck, "dpll_per_ck", &dpll_per_ck, 0x0, +- AM33XX_CM_CLKDCOLDO_DPLL_PER, AM33XX_ST_DPLL_CLKDCOLDO_SHIFT, +- 0x0, NULL); +- +-DEFINE_CLK_GATE(ieee5000_fck, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck, +- 0x0, AM33XX_CM_PER_IEEE5000_CLKCTRL, +- AM33XX_MODULEMODE_SWCTRL_SHIFT, 0x0, NULL); +- +-/* Timers */ +-static const struct clksel timer1_clkmux_sel[] = { +- { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, +- { .parent = &clkdiv32k_ick, .rates = div_1_1_rates }, +- { .parent = &tclkin_ck, .rates = div_1_2_rates }, +- { .parent = &clk_rc32k_ck, .rates = div_1_3_rates }, +- { .parent = &clk_32768_ck, .rates = div_1_4_rates }, +- { .parent = NULL }, +-}; +- +-static const char *timer1_ck_parents[] = { +- "sys_clkin_ck", "clkdiv32k_ick", "tclkin_ck", "clk_rc32k_ck", +- "clk_32768_ck", +-}; +- +-static struct clk timer1_fck; +- +-static const struct clk_ops timer1_fck_ops = { +- .recalc_rate = &omap2_clksel_recalc, +- .get_parent = &omap2_clksel_find_parent_index, +- .set_parent = &omap2_clksel_set_parent, +- .init = &omap2_init_clk_clkdm, +-}; +- +-static struct clk_hw_omap timer1_fck_hw = { +- .hw = { +- .clk = &timer1_fck, +- }, +- .clkdm_name = "l4ls_clkdm", +- .clksel = timer1_clkmux_sel, +- .clksel_reg = AM33XX_CLKSEL_TIMER1MS_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_2_MASK, +-}; +- +-DEFINE_STRUCT_CLK(timer1_fck, timer1_ck_parents, timer1_fck_ops); +- +-static const struct clksel timer2_to_7_clk_sel[] = { +- { .parent = &tclkin_ck, .rates = div_1_0_rates }, +- { .parent = &sys_clkin_ck, .rates = div_1_1_rates }, +- { .parent = &clkdiv32k_ick, .rates = div_1_2_rates }, +- { .parent = NULL }, +-}; +- +-static const char *timer2_to_7_ck_parents[] = { +- "tclkin_ck", "sys_clkin_ck", "clkdiv32k_ick", +-}; +- +-static struct clk timer2_fck; +- +-static struct clk_hw_omap timer2_fck_hw = { +- .hw = { +- .clk = &timer2_fck, +- }, +- .clkdm_name = "l4ls_clkdm", +- .clksel = timer2_to_7_clk_sel, +- .clksel_reg = AM33XX_CLKSEL_TIMER2_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(timer2_fck, timer2_to_7_ck_parents, timer1_fck_ops); +- +-static struct clk timer3_fck; +- +-static struct clk_hw_omap timer3_fck_hw = { +- .hw = { +- .clk = &timer3_fck, +- }, +- .clkdm_name = "l4ls_clkdm", +- .clksel = timer2_to_7_clk_sel, +- .clksel_reg = AM33XX_CLKSEL_TIMER3_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(timer3_fck, timer2_to_7_ck_parents, timer1_fck_ops); +- +-static struct clk timer4_fck; +- +-static struct clk_hw_omap timer4_fck_hw = { +- .hw = { +- .clk = &timer4_fck, +- }, +- .clkdm_name = "l4ls_clkdm", +- .clksel = timer2_to_7_clk_sel, +- .clksel_reg = AM33XX_CLKSEL_TIMER4_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(timer4_fck, timer2_to_7_ck_parents, timer1_fck_ops); +- +-static struct clk timer5_fck; +- +-static struct clk_hw_omap timer5_fck_hw = { +- .hw = { +- .clk = &timer5_fck, +- }, +- .clkdm_name = "l4ls_clkdm", +- .clksel = timer2_to_7_clk_sel, +- .clksel_reg = AM33XX_CLKSEL_TIMER5_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(timer5_fck, timer2_to_7_ck_parents, timer1_fck_ops); +- +-static struct clk timer6_fck; +- +-static struct clk_hw_omap timer6_fck_hw = { +- .hw = { +- .clk = &timer6_fck, +- }, +- .clkdm_name = "l4ls_clkdm", +- .clksel = timer2_to_7_clk_sel, +- .clksel_reg = AM33XX_CLKSEL_TIMER6_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(timer6_fck, timer2_to_7_ck_parents, timer1_fck_ops); +- +-static struct clk timer7_fck; +- +-static struct clk_hw_omap timer7_fck_hw = { +- .hw = { +- .clk = &timer7_fck, +- }, +- .clkdm_name = "l4ls_clkdm", +- .clksel = timer2_to_7_clk_sel, +- .clksel_reg = AM33XX_CLKSEL_TIMER7_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(timer7_fck, timer2_to_7_ck_parents, timer1_fck_ops); +- +-DEFINE_CLK_FIXED_FACTOR(cpsw_125mhz_gclk, +- "dpll_core_m5_ck", +- &dpll_core_m5_ck, +- 0x0, +- 1, 2); +- +-static const struct clk_ops cpsw_fck_ops = { +- .recalc_rate = &omap2_clksel_recalc, +- .get_parent = &omap2_clksel_find_parent_index, +- .set_parent = &omap2_clksel_set_parent, +-}; +- +-static const struct clksel cpsw_cpts_rft_clkmux_sel[] = { +- { .parent = &dpll_core_m5_ck, .rates = div_1_0_rates }, +- { .parent = &dpll_core_m4_ck, .rates = div_1_1_rates }, +- { .parent = NULL }, +-}; +- +-static const char *cpsw_cpts_rft_ck_parents[] = { +- "dpll_core_m5_ck", "dpll_core_m4_ck", +-}; +- +-static struct clk cpsw_cpts_rft_clk; +- +-static struct clk_hw_omap cpsw_cpts_rft_clk_hw = { +- .hw = { +- .clk = &cpsw_cpts_rft_clk, +- }, +- .clkdm_name = "cpsw_125mhz_clkdm", +- .clksel = cpsw_cpts_rft_clkmux_sel, +- .clksel_reg = AM33XX_CM_CPTS_RFT_CLKSEL, +- .clksel_mask = AM33XX_CLKSEL_0_0_MASK, +-}; +- +-DEFINE_STRUCT_CLK(cpsw_cpts_rft_clk, cpsw_cpts_rft_ck_parents, cpsw_fck_ops); +- +- +-/* gpio */ +-static const char *gpio0_ck_parents[] = { +- "clk_rc32k_ck", "clk_32768_ck", "clkdiv32k_ick", +-}; +- +-static const struct clksel gpio0_dbclk_mux_sel[] = { +- { .parent = &clk_rc32k_ck, .rates = div_1_0_rates }, +- { .parent = &clk_32768_ck, .rates = div_1_1_rates }, +- { .parent = &clkdiv32k_ick, .rates = div_1_2_rates }, +- { .parent = NULL }, +-}; +- +-static const struct clk_ops gpio_fck_ops = { +- .recalc_rate = &omap2_clksel_recalc, +- .get_parent = &omap2_clksel_find_parent_index, +- .set_parent = &omap2_clksel_set_parent, +- .init = &omap2_init_clk_clkdm, +-}; +- +-static struct clk gpio0_dbclk_mux_ck; +- +-static struct clk_hw_omap gpio0_dbclk_mux_ck_hw = { +- .hw = { +- .clk = &gpio0_dbclk_mux_ck, +- }, +- .clkdm_name = "l4_wkup_clkdm", +- .clksel = gpio0_dbclk_mux_sel, +- .clksel_reg = AM33XX_CLKSEL_GPIO0_DBCLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(gpio0_dbclk_mux_ck, gpio0_ck_parents, gpio_fck_ops); +- +-DEFINE_CLK_GATE(gpio0_dbclk, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck, 0x0, +- AM33XX_CM_WKUP_GPIO0_CLKCTRL, +- AM33XX_OPTFCLKEN_GPIO0_GDBCLK_SHIFT, 0x0, NULL); +- +-DEFINE_CLK_GATE(gpio1_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0, +- AM33XX_CM_PER_GPIO1_CLKCTRL, +- AM33XX_OPTFCLKEN_GPIO_1_GDBCLK_SHIFT, 0x0, NULL); +- +-DEFINE_CLK_GATE(gpio2_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0, +- AM33XX_CM_PER_GPIO2_CLKCTRL, +- AM33XX_OPTFCLKEN_GPIO_2_GDBCLK_SHIFT, 0x0, NULL); +- +-DEFINE_CLK_GATE(gpio3_dbclk, "clkdiv32k_ick", &clkdiv32k_ick, 0x0, +- AM33XX_CM_PER_GPIO3_CLKCTRL, +- AM33XX_OPTFCLKEN_GPIO_3_GDBCLK_SHIFT, 0x0, NULL); +- +- +-static const char *pruss_ck_parents[] = { +- "l3_gclk", "dpll_disp_m2_ck", +-}; +- +-static const struct clksel pruss_ocp_clk_mux_sel[] = { +- { .parent = &l3_gclk, .rates = div_1_0_rates }, +- { .parent = &dpll_disp_m2_ck, .rates = div_1_1_rates }, +- { .parent = NULL }, +-}; +- +-static struct clk pruss_ocp_gclk; +- +-static struct clk_hw_omap pruss_ocp_gclk_hw = { +- .hw = { +- .clk = &pruss_ocp_gclk, +- }, +- .clkdm_name = "pruss_ocp_clkdm", +- .clksel = pruss_ocp_clk_mux_sel, +- .clksel_reg = AM33XX_CLKSEL_PRUSS_OCP_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_0_MASK, +-}; +- +-DEFINE_STRUCT_CLK(pruss_ocp_gclk, pruss_ck_parents, gpio_fck_ops); +- +-static const char *lcd_ck_parents[] = { +- "dpll_disp_m2_ck", "dpll_core_m5_ck", "dpll_per_m2_ck", +-}; +- +-static const struct clksel lcd_clk_mux_sel[] = { +- { .parent = &dpll_disp_m2_ck, .rates = div_1_0_rates }, +- { .parent = &dpll_core_m5_ck, .rates = div_1_1_rates }, +- { .parent = &dpll_per_m2_ck, .rates = div_1_2_rates }, +- { .parent = NULL }, +-}; +- +-static struct clk lcd_gclk; +- +-static struct clk_hw_omap lcd_gclk_hw = { +- .hw = { +- .clk = &lcd_gclk, +- }, +- .clkdm_name = "lcdc_clkdm", +- .clksel = lcd_clk_mux_sel, +- .clksel_reg = AM33XX_CLKSEL_LCDC_PIXEL_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK_FLAGS(lcd_gclk, lcd_ck_parents, +- gpio_fck_ops, CLK_SET_RATE_PARENT); +- +-DEFINE_CLK_FIXED_FACTOR(mmc_clk, "dpll_per_m2_ck", &dpll_per_m2_ck, 0x0, 1, 2); +- +-static const char *gfx_ck_parents[] = { +- "dpll_core_m4_ck", "dpll_per_m2_ck", +-}; +- +-static const struct clksel gfx_clksel_sel[] = { +- { .parent = &dpll_core_m4_ck, .rates = div_1_0_rates }, +- { .parent = &dpll_per_m2_ck, .rates = div_1_1_rates }, +- { .parent = NULL }, +-}; +- +-static struct clk gfx_fclk_clksel_ck; +- +-static struct clk_hw_omap gfx_fclk_clksel_ck_hw = { +- .hw = { +- .clk = &gfx_fclk_clksel_ck, +- }, +- .clksel = gfx_clksel_sel, +- .clksel_reg = AM33XX_CLKSEL_GFX_FCLK, +- .clksel_mask = AM33XX_CLKSEL_GFX_FCLK_MASK, +-}; +- +-DEFINE_STRUCT_CLK(gfx_fclk_clksel_ck, gfx_ck_parents, gpio_fck_ops); +- +-static const struct clk_div_table div_1_0_2_1_rates[] = { +- { .div = 1, .val = 0, }, +- { .div = 2, .val = 1, }, +- { .div = 0 }, +-}; +- +-DEFINE_CLK_DIVIDER_TABLE(gfx_fck_div_ck, "gfx_fclk_clksel_ck", +- &gfx_fclk_clksel_ck, 0x0, AM33XX_CLKSEL_GFX_FCLK, +- AM33XX_CLKSEL_0_0_SHIFT, AM33XX_CLKSEL_0_0_WIDTH, +- 0x0, div_1_0_2_1_rates, NULL); +- +-static const char *sysclkout_ck_parents[] = { +- "clk_32768_ck", "l3_gclk", "dpll_ddr_m2_ck", "dpll_per_m2_ck", +- "lcd_gclk", +-}; +- +-static const struct clksel sysclkout_pre_sel[] = { +- { .parent = &clk_32768_ck, .rates = div_1_0_rates }, +- { .parent = &l3_gclk, .rates = div_1_1_rates }, +- { .parent = &dpll_ddr_m2_ck, .rates = div_1_2_rates }, +- { .parent = &dpll_per_m2_ck, .rates = div_1_3_rates }, +- { .parent = &lcd_gclk, .rates = div_1_4_rates }, +- { .parent = NULL }, +-}; +- +-static struct clk sysclkout_pre_ck; +- +-static struct clk_hw_omap sysclkout_pre_ck_hw = { +- .hw = { +- .clk = &sysclkout_pre_ck, +- }, +- .clksel = sysclkout_pre_sel, +- .clksel_reg = AM33XX_CM_CLKOUT_CTRL, +- .clksel_mask = AM33XX_CLKOUT2SOURCE_MASK, +-}; +- +-DEFINE_STRUCT_CLK(sysclkout_pre_ck, sysclkout_ck_parents, gpio_fck_ops); +- +-/* Divide by 8 clock rates with default clock is 1/1*/ +-static const struct clk_div_table div8_rates[] = { +- { .div = 1, .val = 0, }, +- { .div = 2, .val = 1, }, +- { .div = 3, .val = 2, }, +- { .div = 4, .val = 3, }, +- { .div = 5, .val = 4, }, +- { .div = 6, .val = 5, }, +- { .div = 7, .val = 6, }, +- { .div = 8, .val = 7, }, +- { .div = 0 }, +-}; +- +-DEFINE_CLK_DIVIDER_TABLE(clkout2_div_ck, "sysclkout_pre_ck", &sysclkout_pre_ck, +- 0x0, AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2DIV_SHIFT, +- AM33XX_CLKOUT2DIV_WIDTH, 0x0, div8_rates, NULL); +- +-DEFINE_CLK_GATE(clkout2_ck, "clkout2_div_ck", &clkout2_div_ck, 0x0, +- AM33XX_CM_CLKOUT_CTRL, AM33XX_CLKOUT2EN_SHIFT, 0x0, NULL); +- +-static const char *wdt_ck_parents[] = { +- "clk_rc32k_ck", "clkdiv32k_ick", +-}; +- +-static const struct clksel wdt_clkmux_sel[] = { +- { .parent = &clk_rc32k_ck, .rates = div_1_0_rates }, +- { .parent = &clkdiv32k_ick, .rates = div_1_1_rates }, +- { .parent = NULL }, +-}; +- +-static struct clk wdt1_fck; +- +-static struct clk_hw_omap wdt1_fck_hw = { +- .hw = { +- .clk = &wdt1_fck, +- }, +- .clkdm_name = "l4_wkup_clkdm", +- .clksel = wdt_clkmux_sel, +- .clksel_reg = AM33XX_CLKSEL_WDT1_CLK, +- .clksel_mask = AM33XX_CLKSEL_0_1_MASK, +-}; +- +-DEFINE_STRUCT_CLK(wdt1_fck, wdt_ck_parents, gpio_fck_ops); +- +-static const char *pwmss_clk_parents[] = { +- "dpll_per_m2_ck", +-}; +- +-static const struct clk_ops ehrpwm_tbclk_ops = { +- .enable = &omap2_dflt_clk_enable, +- .disable = &omap2_dflt_clk_disable, +-}; +- +-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm0_tbclk, "l4ls_clkdm", +- NULL, NULL, 0, +- AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL), +- AM33XX_PWMSS0_TBCLKEN_SHIFT, +- NULL, pwmss_clk_parents, ehrpwm_tbclk_ops); +- +-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm1_tbclk, "l4ls_clkdm", +- NULL, NULL, 0, +- AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL), +- AM33XX_PWMSS1_TBCLKEN_SHIFT, +- NULL, pwmss_clk_parents, ehrpwm_tbclk_ops); +- +-DEFINE_CLK_OMAP_MUX_GATE(ehrpwm2_tbclk, "l4ls_clkdm", +- NULL, NULL, 0, +- AM33XX_CTRL_REGADDR(AM33XX_PWMSS_TBCLK_CLKCTRL), +- AM33XX_PWMSS2_TBCLKEN_SHIFT, +- NULL, pwmss_clk_parents, ehrpwm_tbclk_ops); +- +-/* +- * debugss optional clocks +- */ +-DEFINE_CLK_GATE(dbg_sysclk_ck, "sys_clkin_ck", &sys_clkin_ck, +- 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, +- AM33XX_OPTFCLKEN_DBGSYSCLK_SHIFT, 0x0, NULL); +- +-DEFINE_CLK_GATE(dbg_clka_ck, "dpll_core_m4_ck", &dpll_core_m4_ck, +- 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, +- AM33XX_OPTCLK_DEBUG_CLKA_SHIFT, 0x0, NULL); +- +-static const char *stm_pmd_clock_mux_ck_parents[] = { +- "dbg_sysclk_ck", "dbg_clka_ck", +-}; +- +-DEFINE_CLK_MUX(stm_pmd_clock_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0, +- AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, AM33XX_STM_PMD_CLKSEL_SHIFT, +- AM33XX_STM_PMD_CLKSEL_WIDTH, 0x0, NULL); +- +-DEFINE_CLK_MUX(trace_pmd_clk_mux_ck, stm_pmd_clock_mux_ck_parents, NULL, 0x0, +- AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, +- AM33XX_TRC_PMD_CLKSEL_SHIFT, +- AM33XX_TRC_PMD_CLKSEL_WIDTH, 0x0, NULL); +- +-DEFINE_CLK_DIVIDER(stm_clk_div_ck, "stm_pmd_clock_mux_ck", +- &stm_pmd_clock_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, +- AM33XX_STM_PMD_CLKDIVSEL_SHIFT, +- AM33XX_STM_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO, +- NULL); +- +-DEFINE_CLK_DIVIDER(trace_clk_div_ck, "trace_pmd_clk_mux_ck", +- &trace_pmd_clk_mux_ck, 0x0, AM33XX_CM_WKUP_DEBUGSS_CLKCTRL, +- AM33XX_TRC_PMD_CLKDIVSEL_SHIFT, +- AM33XX_TRC_PMD_CLKDIVSEL_WIDTH, CLK_DIVIDER_POWER_OF_TWO, +- NULL); +- +-/* +- * clkdev +- */ +-static struct omap_clk am33xx_clks[] = { +- CLK(NULL, "clk_32768_ck", &clk_32768_ck), +- CLK(NULL, "clk_rc32k_ck", &clk_rc32k_ck), +- CLK(NULL, "virt_19200000_ck", &virt_19200000_ck), +- CLK(NULL, "virt_24000000_ck", &virt_24000000_ck), +- CLK(NULL, "virt_25000000_ck", &virt_25000000_ck), +- CLK(NULL, "virt_26000000_ck", &virt_26000000_ck), +- CLK(NULL, "sys_clkin_ck", &sys_clkin_ck), +- CLK(NULL, "tclkin_ck", &tclkin_ck), +- CLK(NULL, "dpll_core_ck", &dpll_core_ck), +- CLK(NULL, "dpll_core_x2_ck", &dpll_core_x2_ck), +- CLK(NULL, "dpll_core_m4_ck", &dpll_core_m4_ck), +- CLK(NULL, "dpll_core_m5_ck", &dpll_core_m5_ck), +- CLK(NULL, "dpll_core_m6_ck", &dpll_core_m6_ck), +- CLK(NULL, "dpll_mpu_ck", &dpll_mpu_ck), +- CLK("cpu0", NULL, &dpll_mpu_ck), +- CLK(NULL, "dpll_mpu_m2_ck", &dpll_mpu_m2_ck), +- CLK(NULL, "dpll_ddr_ck", &dpll_ddr_ck), +- CLK(NULL, "dpll_ddr_m2_ck", &dpll_ddr_m2_ck), +- CLK(NULL, "dpll_ddr_m2_div2_ck", &dpll_ddr_m2_div2_ck), +- CLK(NULL, "dpll_disp_ck", &dpll_disp_ck), +- CLK(NULL, "dpll_disp_m2_ck", &dpll_disp_m2_ck), +- CLK(NULL, "dpll_per_ck", &dpll_per_ck), +- CLK(NULL, "dpll_per_m2_ck", &dpll_per_m2_ck), +- CLK(NULL, "dpll_per_m2_div4_wkupdm_ck", &dpll_per_m2_div4_wkupdm_ck), +- CLK(NULL, "dpll_per_m2_div4_ck", &dpll_per_m2_div4_ck), +- CLK(NULL, "adc_tsc_fck", &adc_tsc_fck), +- CLK(NULL, "cefuse_fck", &cefuse_fck), +- CLK(NULL, "clkdiv32k_ck", &clkdiv32k_ck), +- CLK(NULL, "clkdiv32k_ick", &clkdiv32k_ick), +- CLK(NULL, "dcan0_fck", &dcan0_fck), +- CLK("481cc000.d_can", NULL, &dcan0_fck), +- CLK(NULL, "dcan1_fck", &dcan1_fck), +- CLK("481d0000.d_can", NULL, &dcan1_fck), +- CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk), +- CLK(NULL, "mcasp0_fck", &mcasp0_fck), +- CLK(NULL, "mcasp1_fck", &mcasp1_fck), +- CLK(NULL, "mmu_fck", &mmu_fck), +- CLK(NULL, "smartreflex0_fck", &smartreflex0_fck), +- CLK(NULL, "smartreflex1_fck", &smartreflex1_fck), +- CLK(NULL, "sha0_fck", &sha0_fck), +- CLK(NULL, "aes0_fck", &aes0_fck), +- CLK(NULL, "rng_fck", &rng_fck), +- CLK(NULL, "timer1_fck", &timer1_fck), +- CLK(NULL, "timer2_fck", &timer2_fck), +- CLK(NULL, "timer3_fck", &timer3_fck), +- CLK(NULL, "timer4_fck", &timer4_fck), +- CLK(NULL, "timer5_fck", &timer5_fck), +- CLK(NULL, "timer6_fck", &timer6_fck), +- CLK(NULL, "timer7_fck", &timer7_fck), +- CLK(NULL, "usbotg_fck", &usbotg_fck), +- CLK(NULL, "ieee5000_fck", &ieee5000_fck), +- CLK(NULL, "wdt1_fck", &wdt1_fck), +- CLK(NULL, "l4_rtc_gclk", &l4_rtc_gclk), +- CLK(NULL, "l3_gclk", &l3_gclk), +- CLK(NULL, "dpll_core_m4_div2_ck", &dpll_core_m4_div2_ck), +- CLK(NULL, "l4hs_gclk", &l4hs_gclk), +- CLK(NULL, "l3s_gclk", &l3s_gclk), +- CLK(NULL, "l4fw_gclk", &l4fw_gclk), +- CLK(NULL, "l4ls_gclk", &l4ls_gclk), +- CLK(NULL, "clk_24mhz", &clk_24mhz), +- CLK(NULL, "sysclk_div_ck", &sysclk_div_ck), +- CLK(NULL, "cpsw_125mhz_gclk", &cpsw_125mhz_gclk), +- CLK(NULL, "cpsw_cpts_rft_clk", &cpsw_cpts_rft_clk), +- CLK(NULL, "gpio0_dbclk_mux_ck", &gpio0_dbclk_mux_ck), +- CLK(NULL, "gpio0_dbclk", &gpio0_dbclk), +- CLK(NULL, "gpio1_dbclk", &gpio1_dbclk), +- CLK(NULL, "gpio2_dbclk", &gpio2_dbclk), +- CLK(NULL, "gpio3_dbclk", &gpio3_dbclk), +- CLK(NULL, "lcd_gclk", &lcd_gclk), +- CLK(NULL, "mmc_clk", &mmc_clk), +- CLK(NULL, "gfx_fclk_clksel_ck", &gfx_fclk_clksel_ck), +- CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck), +- CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck), +- CLK(NULL, "clkout2_div_ck", &clkout2_div_ck), +- CLK(NULL, "timer_32k_ck", &clkdiv32k_ick), +- CLK(NULL, "timer_sys_ck", &sys_clkin_ck), +- CLK(NULL, "dbg_sysclk_ck", &dbg_sysclk_ck), +- CLK(NULL, "dbg_clka_ck", &dbg_clka_ck), +- CLK(NULL, "stm_pmd_clock_mux_ck", &stm_pmd_clock_mux_ck), +- CLK(NULL, "trace_pmd_clk_mux_ck", &trace_pmd_clk_mux_ck), +- CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck), +- CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck), +- CLK(NULL, "clkout2_ck", &clkout2_ck), +- CLK("48300200.ehrpwm", "tbclk", &ehrpwm0_tbclk), +- CLK("48302200.ehrpwm", "tbclk", &ehrpwm1_tbclk), +- CLK("48304200.ehrpwm", "tbclk", &ehrpwm2_tbclk), +-}; +- +- +-static const char *enable_init_clks[] = { +- "dpll_ddr_m2_ck", +- "dpll_mpu_m2_ck", +- "l3_gclk", +- "l4hs_gclk", +- "l4fw_gclk", +- "l4ls_gclk", +- "clkout2_ck", /* Required for external peripherals like, Audio codecs */ +-}; +- +-int __init am33xx_clk_init(void) +-{ +- if (soc_is_am33xx()) +- cpu_mask = RATE_IN_AM33XX; +- +- omap_clocks_register(am33xx_clks, ARRAY_SIZE(am33xx_clks)); +- +- omap2_clk_disable_autoidle_all(); +- +- omap2_clk_enable_init_clocks(enable_init_clks, +- ARRAY_SIZE(enable_init_clks)); +- +- /* TRM ERRATA: Timer 3 & 6 default parent (TCLKIN) may not be always +- * physically present, in such a case HWMOD enabling of +- * clock would be failure with default parent. And timer +- * probe thinks clock is already enabled, this leads to +- * crash upon accessing timer 3 & 6 registers in probe. +- * Fix by setting parent of both these timers to master +- * oscillator clock. +- */ +- +- clk_set_parent(&timer3_fck, &sys_clkin_ck); +- clk_set_parent(&timer6_fck, &sys_clkin_ck); +- /* +- * The On-Chip 32K RC Osc clock is not an accurate clock-source as per +- * the design/spec, so as a result, for example, timer which supposed +- * to get expired @60Sec, but will expire somewhere ~@40Sec, which is +- * not expected by any use-case, so change WDT1 clock source to PRCM +- * 32KHz clock. +- */ +- clk_set_parent(&wdt1_fck, &clkdiv32k_ick); +- +- return 0; +-} +--- a/arch/arm/mach-omap2/clkt_dpll.c ++++ b/arch/arm/mach-omap2/clkt_dpll.c +@@ -209,7 +209,7 @@ u8 omap2_init_dpll_parent(struct clk_hw + if (v == OMAP3XXX_EN_DPLL_LPBYPASS || + v == OMAP3XXX_EN_DPLL_FRBYPASS) + return 1; +- } else if (soc_is_am33xx() || cpu_is_omap44xx()) { ++ } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) +@@ -255,7 +255,7 @@ unsigned long omap2_get_dpll_rate(struct + if (v == OMAP3XXX_EN_DPLL_LPBYPASS || + v == OMAP3XXX_EN_DPLL_FRBYPASS) + return __clk_get_rate(dd->clk_bypass); +- } else if (soc_is_am33xx() || cpu_is_omap44xx()) { ++ } else if (soc_is_am33xx() || cpu_is_omap44xx() || soc_is_am43xx()) { + if (v == OMAP4XXX_EN_DPLL_LPBYPASS || + v == OMAP4XXX_EN_DPLL_FRBYPASS || + v == OMAP4XXX_EN_DPLL_MNBYPASS) +--- a/arch/arm/mach-omap2/clock3xxx.h ++++ b/arch/arm/mach-omap2/clock3xxx.h +@@ -9,11 +9,12 @@ + #define __ARCH_ARM_MACH_OMAP2_CLOCK3XXX_H + + int omap3xxx_clk_init(void); +-int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, +- unsigned long parent_rate); ++int omap3430_clk_init(void); ++int omap3630_clk_init(void); ++int ti81xx_clk_init(void); ++int am35xx_clk_init(void); + int omap3_core_dpll_m2_set_rate(struct clk_hw *clk, unsigned long rate, + unsigned long parent_rate); +-void omap3_clk_lock_dpll5(void); + + extern struct clk *sdrc_ick_p; + extern struct clk *arm_fck_p; +--- a/arch/arm/mach-omap2/clock.c ++++ b/arch/arm/mach-omap2/clock.c +@@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void) + list_for_each_entry(c, &clk_hw_omap_clocks, node) + if (c->ops && c->ops->allow_idle) + c->ops->allow_idle(c); ++ ++ of_omap_clk_allow_autoidle_all(); ++ + return 0; + } + +@@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void) + list_for_each_entry(c, &clk_hw_omap_clocks, node) + if (c->ops && c->ops->deny_idle) + c->ops->deny_idle(c); ++ ++ of_omap_clk_deny_autoidle_all(); ++ + return 0; + } + +--- a/arch/arm/mach-omap2/clockdomain.h ++++ b/arch/arm/mach-omap2/clockdomain.h +@@ -132,7 +132,7 @@ struct clockdomain { + u8 _flags; + const u8 dep_bit; + const u8 prcm_partition; +- const s16 cm_inst; ++ const u16 cm_inst; + const u16 clkdm_offs; + struct clkdm_dep *wkdep_srcs; + struct clkdm_dep *sleepdep_srcs; +@@ -215,6 +215,7 @@ extern void __init omap242x_clockdomains + extern void __init omap243x_clockdomains_init(void); + extern void __init omap3xxx_clockdomains_init(void); + extern void __init am33xx_clockdomains_init(void); ++extern void am43xx_clockdomains_init(void); + extern void __init omap44xx_clockdomains_init(void); + extern void __init omap54xx_clockdomains_init(void); + extern void __init dra7xx_clockdomains_init(void); +@@ -226,6 +227,7 @@ extern struct clkdm_ops omap2_clkdm_oper + extern struct clkdm_ops omap3_clkdm_operations; + extern struct clkdm_ops omap4_clkdm_operations; + extern struct clkdm_ops am33xx_clkdm_operations; ++extern struct clkdm_ops am43xx_clkdm_operations; + + extern struct clkdm_dep gfx_24xx_wkdeps[]; + extern struct clkdm_dep dsp_24xx_wkdeps[]; +--- /dev/null ++++ b/arch/arm/mach-omap2/clockdomains43xx_data.c +@@ -0,0 +1,199 @@ ++/* ++ * AM43xx Clock domains framework ++ * ++ * Copyright (C) 2013 Texas Instruments, Inc. ++ * ++ * This file is made by modifying the file generated automatically ++ * from the OMAP hardware databases. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++ ++#include "clockdomain.h" ++#include "prcm44xx.h" ++#include "prcm43xx.h" ++ ++static struct clockdomain l4_cefuse_43xx_clkdm = { ++ .name = "l4_cefuse_clkdm", ++ .pwrdm = { .name = "cefuse_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_CEFUSE_INST, ++ .clkdm_offs = AM43XX_CM_CEFUSE_CEFUSE_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain mpu_43xx_clkdm = { ++ .name = "mpu_clkdm", ++ .pwrdm = { .name = "mpu_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_MPU_INST, ++ .clkdm_offs = AM43XX_CM_MPU_MPU_CDOFFS, ++ .flags = CLKDM_CAN_HWSUP_SWSUP, ++}; ++ ++static struct clockdomain l4ls_43xx_clkdm = { ++ .name = "l4ls_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_L4LS_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain tamper_43xx_clkdm = { ++ .name = "tamper_clkdm", ++ .pwrdm = { .name = "tamper_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_TAMPER_INST, ++ .clkdm_offs = AM43XX_CM_TAMPER_TAMPER_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain l4_rtc_43xx_clkdm = { ++ .name = "l4_rtc_clkdm", ++ .pwrdm = { .name = "rtc_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_RTC_INST, ++ .clkdm_offs = AM43XX_CM_RTC_RTC_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain pruss_ocp_43xx_clkdm = { ++ .name = "pruss_ocp_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_ICSS_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain ocpwp_l3_43xx_clkdm = { ++ .name = "ocpwp_l3_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_OCPWP_L3_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain l3s_tsc_43xx_clkdm = { ++ .name = "l3s_tsc_clkdm", ++ .pwrdm = { .name = "wkup_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_WKUP_INST, ++ .clkdm_offs = AM43XX_CM_WKUP_L3S_TSC_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain dss_43xx_clkdm = { ++ .name = "dss_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_DSS_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain l3_aon_43xx_clkdm = { ++ .name = "l3_aon_clkdm", ++ .pwrdm = { .name = "wkup_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_WKUP_INST, ++ .clkdm_offs = AM43XX_CM_WKUP_L3_AON_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain emif_43xx_clkdm = { ++ .name = "emif_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_EMIF_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain l4_wkup_aon_43xx_clkdm = { ++ .name = "l4_wkup_aon_clkdm", ++ .pwrdm = { .name = "wkup_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_WKUP_INST, ++ .clkdm_offs = AM43XX_CM_WKUP_L4_WKUP_AON_CDOFFS, ++}; ++ ++static struct clockdomain l3_43xx_clkdm = { ++ .name = "l3_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_L3_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain l4_wkup_43xx_clkdm = { ++ .name = "l4_wkup_clkdm", ++ .pwrdm = { .name = "wkup_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_WKUP_INST, ++ .clkdm_offs = AM43XX_CM_WKUP_WKUP_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain cpsw_125mhz_43xx_clkdm = { ++ .name = "cpsw_125mhz_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_CPSW_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain gfx_l3_43xx_clkdm = { ++ .name = "gfx_l3_clkdm", ++ .pwrdm = { .name = "gfx_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_GFX_INST, ++ .clkdm_offs = AM43XX_CM_GFX_GFX_L3_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain l3s_43xx_clkdm = { ++ .name = "l3s_clkdm", ++ .pwrdm = { .name = "per_pwrdm" }, ++ .prcm_partition = AM43XX_CM_PARTITION, ++ .cm_inst = AM43XX_CM_PER_INST, ++ .clkdm_offs = AM43XX_CM_PER_L3S_CDOFFS, ++ .flags = CLKDM_CAN_SWSUP, ++}; ++ ++static struct clockdomain *clockdomains_am43xx[] __initdata = { ++ &l4_cefuse_43xx_clkdm, ++ &mpu_43xx_clkdm, ++ &l4ls_43xx_clkdm, ++ &tamper_43xx_clkdm, ++ &l4_rtc_43xx_clkdm, ++ &pruss_ocp_43xx_clkdm, ++ &ocpwp_l3_43xx_clkdm, ++ &l3s_tsc_43xx_clkdm, ++ &dss_43xx_clkdm, ++ &l3_aon_43xx_clkdm, ++ &emif_43xx_clkdm, ++ &l4_wkup_aon_43xx_clkdm, ++ &l3_43xx_clkdm, ++ &l4_wkup_43xx_clkdm, ++ &cpsw_125mhz_43xx_clkdm, ++ &gfx_l3_43xx_clkdm, ++ &l3s_43xx_clkdm, ++ NULL ++}; ++ ++void __init am43xx_clockdomains_init(void) ++{ ++ clkdm_register_platform_funcs(&am43xx_clkdm_operations); ++ clkdm_register_clkdms(clockdomains_am43xx); ++ clkdm_complete_init(); ++} +--- a/arch/arm/mach-omap2/clockdomains7xx_data.c ++++ b/arch/arm/mach-omap2/clockdomains7xx_data.c +@@ -409,7 +409,7 @@ static struct clockdomain l4sec_7xx_clkd + .dep_bit = DRA7XX_L4SEC_STATDEP_SHIFT, + .wkdep_srcs = l4sec_wkup_sleep_deps, + .sleepdep_srcs = l4sec_wkup_sleep_deps, +- .flags = CLKDM_CAN_HWSUP_SWSUP, ++ .flags = CLKDM_CAN_SWSUP, + }; + + static struct clockdomain l3main1_7xx_clkdm = { +@@ -554,7 +554,7 @@ static struct clockdomain dss_7xx_clkdm + .dep_bit = DRA7XX_DSS_STATDEP_SHIFT, + .wkdep_srcs = dss_wkup_sleep_deps, + .sleepdep_srcs = dss_wkup_sleep_deps, +- .flags = CLKDM_CAN_HWSUP_SWSUP, ++ .flags = CLKDM_CAN_SWSUP, + }; + + static struct clockdomain emif_7xx_clkdm = { +--- a/arch/arm/mach-omap2/clock.h ++++ b/arch/arm/mach-omap2/clock.h +@@ -21,6 +21,7 @@ + + #include + #include ++#include + + struct omap_clk { + u16 cpu; +@@ -37,7 +38,6 @@ struct omap_clk { + } + + struct clockdomain; +-#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) + + #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name) \ + static struct clk _name = { \ +@@ -178,141 +178,6 @@ struct clksel { + const struct clksel_rate *rates; + }; + +-/** +- * struct dpll_data - DPLL registers and integration data +- * @mult_div1_reg: register containing the DPLL M and N bitfields +- * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg +- * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg +- * @clk_bypass: struct clk pointer to the clock's bypass clock input +- * @clk_ref: struct clk pointer to the clock's reference clock input +- * @control_reg: register containing the DPLL mode bitfield +- * @enable_mask: mask of the DPLL mode bitfield in @control_reg +- * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() +- * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() +- * @last_rounded_m4xen: cache of the last M4X result of +- * omap4_dpll_regm4xen_round_rate() +- * @last_rounded_lpmode: cache of the last lpmode result of +- * omap4_dpll_lpmode_recalc() +- * @max_multiplier: maximum valid non-bypass multiplier value (actual) +- * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() +- * @min_divider: minimum valid non-bypass divider value (actual) +- * @max_divider: maximum valid non-bypass divider value (actual) +- * @modes: possible values of @enable_mask +- * @autoidle_reg: register containing the DPLL autoidle mode bitfield +- * @idlest_reg: register containing the DPLL idle status bitfield +- * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg +- * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg +- * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg +- * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg +- * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg +- * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg +- * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs +- * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs +- * @flags: DPLL type/features (see below) +- * +- * Possible values for @flags: +- * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs) +- * +- * @freqsel_mask is only used on the OMAP34xx family and AM35xx. +- * +- * XXX Some DPLLs have multiple bypass inputs, so it's not technically +- * correct to only have one @clk_bypass pointer. +- * +- * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m, +- * @last_rounded_n) should be separated from the runtime-fixed fields +- * and placed into a different structure, so that the runtime-fixed data +- * can be placed into read-only space. +- */ +-struct dpll_data { +- void __iomem *mult_div1_reg; +- u32 mult_mask; +- u32 div1_mask; +- struct clk *clk_bypass; +- struct clk *clk_ref; +- void __iomem *control_reg; +- u32 enable_mask; +- unsigned long last_rounded_rate; +- u16 last_rounded_m; +- u8 last_rounded_m4xen; +- u8 last_rounded_lpmode; +- u16 max_multiplier; +- u8 last_rounded_n; +- u8 min_divider; +- u16 max_divider; +- u8 modes; +- void __iomem *autoidle_reg; +- void __iomem *idlest_reg; +- u32 autoidle_mask; +- u32 freqsel_mask; +- u32 idlest_mask; +- u32 dco_mask; +- u32 sddiv_mask; +- u32 lpmode_mask; +- u32 m4xen_mask; +- u8 auto_recal_bit; +- u8 recal_en_bit; +- u8 recal_st_bit; +- u8 flags; +-}; +- +-/* +- * struct clk.flags possibilities +- * +- * XXX document the rest of the clock flags here +- * +- * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL +- * bits share the same register. This flag allows the +- * omap4_dpllmx*() code to determine which GATE_CTRL bit field +- * should be used. This is a temporary solution - a better approach +- * would be to associate clock type-specific data with the clock, +- * similar to the struct dpll_data approach. +- */ +-#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */ +-#define CLOCK_IDLE_CONTROL (1 << 1) +-#define CLOCK_NO_IDLE_PARENT (1 << 2) +-#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */ +-#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */ +-#define CLOCK_CLKOUTX2 (1 << 5) +- +-/** +- * struct clk_hw_omap - OMAP struct clk +- * @node: list_head connecting this clock into the full clock list +- * @enable_reg: register to write to enable the clock (see @enable_bit) +- * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg) +- * @flags: see "struct clk.flags possibilities" above +- * @clksel_reg: for clksel clks, register va containing src/divisor select +- * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector +- * @clksel: for clksel clks, pointer to struct clksel for this clock +- * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock +- * @clkdm_name: clockdomain name that this clock is contained in +- * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime +- * @rate_offset: bitshift for rate selection bitfield (OMAP1 only) +- * @src_offset: bitshift for source selection bitfield (OMAP1 only) +- * +- * XXX @rate_offset, @src_offset should probably be removed and OMAP1 +- * clock code converted to use clksel. +- * +- */ +- +-struct clk_hw_omap_ops; +- +-struct clk_hw_omap { +- struct clk_hw hw; +- struct list_head node; +- unsigned long fixed_rate; +- u8 fixed_div; +- void __iomem *enable_reg; +- u8 enable_bit; +- u8 flags; +- void __iomem *clksel_reg; +- u32 clksel_mask; +- const struct clksel *clksel; +- struct dpll_data *dpll_data; +- const char *clkdm_name; +- struct clockdomain *clkdm; +- const struct clk_hw_omap_ops *ops; +-}; +- + struct clk_hw_omap_ops { + void (*find_idlest)(struct clk_hw_omap *oclk, + void __iomem **idlest_reg, +@@ -348,36 +213,13 @@ unsigned long omap_fixed_divisor_recalc( + #define OMAP4XXX_EN_DPLL_FRBYPASS 0x6 + #define OMAP4XXX_EN_DPLL_LOCKED 0x7 + +-/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */ +-#define DPLL_LOW_POWER_STOP 0x1 +-#define DPLL_LOW_POWER_BYPASS 0x5 +-#define DPLL_LOCKED 0x7 +- +-/* DPLL Type and DCO Selection Flags */ +-#define DPLL_J_TYPE 0x1 +- +-long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, +- unsigned long *parent_rate); +-unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate); +-int omap3_noncore_dpll_enable(struct clk_hw *hw); +-void omap3_noncore_dpll_disable(struct clk_hw *hw); +-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate, +- unsigned long parent_rate); + u32 omap3_dpll_autoidle_read(struct clk_hw_omap *clk); + void omap3_dpll_allow_idle(struct clk_hw_omap *clk); + void omap3_dpll_deny_idle(struct clk_hw_omap *clk); +-unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, +- unsigned long parent_rate); + int omap4_dpllmx_gatectrl_read(struct clk_hw_omap *clk); + void omap4_dpllmx_allow_gatectrl(struct clk_hw_omap *clk); + void omap4_dpllmx_deny_gatectrl(struct clk_hw_omap *clk); +-unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw, +- unsigned long parent_rate); +-long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw, +- unsigned long target_rate, +- unsigned long *parent_rate); + +-void omap2_init_clk_clkdm(struct clk_hw *clk); + void __init omap2_clk_disable_clkdm_control(void); + + /* clkt_clksel.c public functions */ +@@ -396,22 +238,15 @@ int omap2_clksel_set_parent(struct clk_h + extern void omap2_clkt_iclk_allow_idle(struct clk_hw_omap *clk); + extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); + +-u8 omap2_init_dpll_parent(struct clk_hw *hw); + unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); + +-int omap2_dflt_clk_enable(struct clk_hw *hw); +-void omap2_dflt_clk_disable(struct clk_hw *hw); +-int omap2_dflt_clk_is_enabled(struct clk_hw *hw); + void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, + void __iomem **other_reg, + u8 *other_bit); + void omap2_clk_dflt_find_idlest(struct clk_hw_omap *clk, + void __iomem **idlest_reg, + u8 *idlest_bit, u8 *idlest_val); +-void omap2_init_clk_hw_omap_clocks(struct clk *clk); + int omap2_clk_enable_autoidle_all(void); +-int omap2_clk_disable_autoidle_all(void); +-void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks); + int omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name); + void omap2_clk_print_new_rates(const char *hfclkin_ck_name, + const char *core_ck_name, +@@ -431,19 +266,8 @@ extern const struct clksel_rate gfx_l3_r + extern const struct clksel_rate dsp_ick_rates[]; + extern struct clk dummy_ck; + +-extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; +-extern const struct clk_hw_omap_ops clkhwops_iclk_wait; +-extern const struct clk_hw_omap_ops clkhwops_wait; +-extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; +-extern const struct clk_hw_omap_ops clkhwops_iclk; + extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait; +-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; +-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; +-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; +-extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; + extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; +-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; +-extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; + extern const struct clk_hw_omap_ops clkhwops_apll54; + extern const struct clk_hw_omap_ops clkhwops_apll96; + extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; +@@ -460,8 +284,5 @@ extern const struct clksel_rate div31_1t + + extern int am33xx_clk_init(void); + +-extern int omap2_clkops_enable_clkdm(struct clk_hw *hw); +-extern void omap2_clkops_disable_clkdm(struct clk_hw *hw); +- + extern void omap_clocks_register(struct omap_clk *oclks, int cnt); + #endif +--- a/arch/arm/mach-omap2/cm33xx.c ++++ b/arch/arm/mach-omap2/cm33xx.c +@@ -48,13 +48,13 @@ + /* Private functions */ + + /* Read a register in a CM instance */ +-static inline u32 am33xx_cm_read_reg(s16 inst, u16 idx) ++static inline u32 am33xx_cm_read_reg(u16 inst, u16 idx) + { + return __raw_readl(cm_base + inst + idx); + } + + /* Write into a register in a CM */ +-static inline void am33xx_cm_write_reg(u32 val, s16 inst, u16 idx) ++static inline void am33xx_cm_write_reg(u32 val, u16 inst, u16 idx) + { + __raw_writel(val, cm_base + inst + idx); + } +@@ -82,7 +82,7 @@ static inline u32 am33xx_cm_clear_reg_bi + return am33xx_cm_rmw_reg_bits(bits, 0x0, inst, idx); + } + +-static inline u32 am33xx_cm_read_reg_bits(u16 inst, s16 idx, u32 mask) ++static inline u32 am33xx_cm_read_reg_bits(u16 inst, u16 idx, u32 mask) + { + u32 v; + +@@ -102,7 +102,7 @@ static inline u32 am33xx_cm_read_reg_bit + * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to + * bit 0. + */ +-static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs) ++static u32 _clkctrl_idlest(u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + u32 v = am33xx_cm_read_reg(inst, clkctrl_offs); + v &= AM33XX_IDLEST_MASK; +@@ -119,7 +119,7 @@ static u32 _clkctrl_idlest(u16 inst, s16 + * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either + * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. + */ +-static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) ++static bool _is_module_ready(u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + u32 v; + +@@ -138,7 +138,7 @@ static bool _is_module_ready(u16 inst, s + * @c must be the unshifted value for CLKTRCTRL - i.e., this function + * will handle the shift itself. + */ +-static void _clktrctrl_write(u8 c, s16 inst, u16 cdoffs) ++static void _clktrctrl_write(u8 c, u16 inst, u16 cdoffs) + { + u32 v; + +@@ -158,7 +158,7 @@ static void _clktrctrl_write(u8 c, s16 i + * Returns true if the clockdomain referred to by (@inst, @cdoffs) + * is in hardware-supervised idle mode, or 0 otherwise. + */ +-bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs) ++bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs) + { + u32 v; + +@@ -177,7 +177,7 @@ bool am33xx_cm_is_clkdm_in_hwsup(s16 ins + * Put a clockdomain referred to by (@inst, @cdoffs) into + * hardware-supervised idle mode. No return value. + */ +-void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs) ++void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs) + { + _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs); + } +@@ -191,7 +191,7 @@ void am33xx_cm_clkdm_enable_hwsup(s16 in + * software-supervised idle mode, i.e., controlled manually by the + * Linux OMAP clockdomain code. No return value. + */ +-void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs) ++void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs) + { + _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs); + } +@@ -204,7 +204,7 @@ void am33xx_cm_clkdm_disable_hwsup(s16 i + * Put a clockdomain referred to by (@inst, @cdoffs) into idle + * No return value. + */ +-void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs) ++void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs) + { + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs); + } +@@ -217,7 +217,7 @@ void am33xx_cm_clkdm_force_sleep(s16 ins + * Take a clockdomain referred to by (@inst, @cdoffs) out of idle, + * waking it up. No return value. + */ +-void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs) ++void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs) + { + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs); + } +@@ -237,7 +237,7 @@ void am33xx_cm_clkdm_force_wakeup(s16 in + * sysconfig cannot be accessed and will probably lead to an "imprecise + * external abort" + */ +-int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs) ++int am33xx_cm_wait_module_ready(u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + int i = 0; + +@@ -258,7 +258,7 @@ int am33xx_cm_wait_module_ready(u16 inst + * like reset assertion or parent clock de-activation must wait the + * module to be fully disabled. + */ +-int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs) ++int am33xx_cm_wait_module_idle(u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + int i = 0; + +@@ -281,7 +281,7 @@ int am33xx_cm_wait_module_idle(u16 inst, + * + * No return value. + */ +-void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs) ++void am33xx_cm_module_enable(u8 mode, u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + u32 v; + +@@ -299,7 +299,7 @@ void am33xx_cm_module_enable(u8 mode, u1 + * + * No return value. + */ +-void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs) ++void am33xx_cm_module_disable(u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + u32 v; + +--- a/arch/arm/mach-omap2/cm33xx.h ++++ b/arch/arm/mach-omap2/cm33xx.h +@@ -377,36 +377,36 @@ + + + #ifndef __ASSEMBLER__ +-extern bool am33xx_cm_is_clkdm_in_hwsup(s16 inst, u16 cdoffs); +-extern void am33xx_cm_clkdm_enable_hwsup(s16 inst, u16 cdoffs); +-extern void am33xx_cm_clkdm_disable_hwsup(s16 inst, u16 cdoffs); +-extern void am33xx_cm_clkdm_force_sleep(s16 inst, u16 cdoffs); +-extern void am33xx_cm_clkdm_force_wakeup(s16 inst, u16 cdoffs); ++extern bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs); ++extern void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs); ++extern void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs); ++extern void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs); ++extern void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs); + +-#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +-extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, ++#ifdef CONFIG_SOC_AM33XX ++extern int am33xx_cm_wait_module_idle(u16 inst, u16 cdoffs, + u16 clkctrl_offs); +-extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, ++extern void am33xx_cm_module_enable(u8 mode, u16 inst, u16 cdoffs, + u16 clkctrl_offs); +-extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs, ++extern void am33xx_cm_module_disable(u16 inst, u16 cdoffs, + u16 clkctrl_offs); +-extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, ++extern int am33xx_cm_wait_module_ready(u16 inst, u16 cdoffs, + u16 clkctrl_offs); + #else +-static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, ++static inline int am33xx_cm_wait_module_idle(u16 inst, u16 cdoffs, + u16 clkctrl_offs) + { + return 0; + } +-static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, ++static inline void am33xx_cm_module_enable(u8 mode, u16 inst, u16 cdoffs, + u16 clkctrl_offs) + { + } +-static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs, ++static inline void am33xx_cm_module_disable(u16 inst, u16 cdoffs, + u16 clkctrl_offs) + { + } +-static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, ++static inline int am33xx_cm_wait_module_ready(u16 inst, u16 cdoffs, + u16 clkctrl_offs) + { + return 0; +--- a/arch/arm/mach-omap2/cminst44xx.c ++++ b/arch/arm/mach-omap2/cminst44xx.c +@@ -80,7 +80,7 @@ void omap_cm_base_init(void) + * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to + * bit 0. + */ +-static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) ++static u32 _clkctrl_idlest(u8 part, u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs); + v &= OMAP4430_IDLEST_MASK; +@@ -98,7 +98,7 @@ static u32 _clkctrl_idlest(u8 part, u16 + * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either + * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. + */ +-static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) ++static bool _is_module_ready(u8 part, u16 inst, u16 cdoffs, u16 clkctrl_offs) + { + u32 v; + +@@ -111,7 +111,7 @@ static bool _is_module_ready(u8 part, u1 + /* Public functions */ + + /* Read a register in a CM instance */ +-u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx) ++u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx) + { + BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || + part == OMAP4430_INVALID_PRCM_PARTITION || +@@ -120,7 +120,7 @@ u32 omap4_cminst_read_inst_reg(u8 part, + } + + /* Write into a register in a CM instance */ +-void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) ++void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx) + { + BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS || + part == OMAP4430_INVALID_PRCM_PARTITION || +@@ -152,7 +152,7 @@ u32 omap4_cminst_clear_inst_reg_bits(u32 + return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx); + } + +-u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask) ++u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, u16 idx, u32 mask) + { + u32 v; + +@@ -177,7 +177,7 @@ u32 omap4_cminst_read_inst_reg_bits(u8 p + * @c must be the unshifted value for CLKTRCTRL - i.e., this function + * will handle the shift itself. + */ +-static void _clktrctrl_write(u8 c, u8 part, s16 inst, u16 cdoffs) ++static void _clktrctrl_write(u8 c, u8 part, u16 inst, u16 cdoffs) + { + u32 v; + +@@ -196,7 +196,7 @@ static void _clktrctrl_write(u8 c, u8 pa + * Returns true if the clockdomain referred to by (@part, @inst, @cdoffs) + * is in hardware-supervised idle mode, or 0 otherwise. + */ +-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs) ++bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs) + { + u32 v; + +@@ -216,7 +216,7 @@ bool omap4_cminst_is_clkdm_in_hwsup(u8 p + * Put a clockdomain referred to by (@part, @inst, @cdoffs) into + * hardware-supervised idle mode. No return value. + */ +-void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs) ++void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs) + { + _clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs); + } +@@ -231,7 +231,7 @@ void omap4_cminst_clkdm_enable_hwsup(u8 + * software-supervised idle mode, i.e., controlled manually by the + * Linux OMAP clockdomain code. No return value. + */ +-void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs) ++void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs) + { + _clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs); + } +@@ -245,7 +245,7 @@ void omap4_cminst_clkdm_disable_hwsup(u8 + * Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle, + * waking it up. No return value. + */ +-void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs) ++void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs) + { + _clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs); + } +@@ -266,7 +266,7 @@ void omap4_cminst_clkdm_force_wakeup(u8 + * sysconfig cannot be accessed and will probably lead to an "imprecise + * external abort" + */ +-int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, ++int omap4_cminst_wait_module_ready(u8 part, u16 inst, u16 cdoffs, + u16 clkctrl_offs) + { + int i = 0; +@@ -292,7 +292,8 @@ int omap4_cminst_wait_module_ready(u8 pa + * like reset assertion or parent clock de-activation must wait the + * module to be fully disabled. + */ +-int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) ++int omap4_cminst_wait_module_idle(u8 part, u16 inst, ++ u16 cdoffs, u16 clkctrl_offs) + { + int i = 0; + +@@ -316,7 +317,7 @@ int omap4_cminst_wait_module_idle(u8 par + * + * No return value. + */ +-void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, ++void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, u16 cdoffs, + u16 clkctrl_offs) + { + u32 v; +@@ -336,7 +337,7 @@ void omap4_cminst_module_enable(u8 mode, + * + * No return value. + */ +-void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, ++void omap4_cminst_module_disable(u8 part, u16 inst, u16 cdoffs, + u16 clkctrl_offs) + { + u32 v; +@@ -479,6 +480,15 @@ struct clkdm_ops omap4_clkdm_operations + .clkdm_sleep = omap4_clkdm_sleep, + .clkdm_wakeup = omap4_clkdm_wakeup, + .clkdm_allow_idle = omap4_clkdm_allow_idle, ++ .clkdm_deny_idle = omap4_clkdm_deny_idle, ++ .clkdm_clk_enable = omap4_clkdm_clk_enable, ++ .clkdm_clk_disable = omap4_clkdm_clk_disable, ++}; ++ ++struct clkdm_ops am43xx_clkdm_operations = { ++ .clkdm_sleep = omap4_clkdm_sleep, ++ .clkdm_wakeup = omap4_clkdm_wakeup, ++ .clkdm_allow_idle = omap4_clkdm_allow_idle, + .clkdm_deny_idle = omap4_clkdm_deny_idle, + .clkdm_clk_enable = omap4_clkdm_clk_enable, + .clkdm_clk_disable = omap4_clkdm_clk_disable, +--- a/arch/arm/mach-omap2/cminst44xx.h ++++ b/arch/arm/mach-omap2/cminst44xx.h +@@ -11,31 +11,32 @@ + #ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H + #define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H + +-extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, s16 inst, u16 cdoffs); +-extern void omap4_cminst_clkdm_enable_hwsup(u8 part, s16 inst, u16 cdoffs); +-extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs); +-extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); +-extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); +-extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); +-extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, ++extern bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs); ++extern void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs); ++extern void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs); ++extern void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs); ++extern void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs); ++extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, ++ u16 cdoffs, u16 clkctrl_offs); ++extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, u16 cdoffs, + u16 clkctrl_offs); +-extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, ++extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, u16 cdoffs, + u16 clkctrl_offs); +-extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, ++extern void omap4_cminst_module_disable(u8 part, u16 inst, u16 cdoffs, + u16 clkctrl_offs); + /* + * In an ideal world, we would not export these low-level functions, + * but this will probably take some time to fix properly + */ +-extern u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx); +-extern void omap4_cminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx); ++extern u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx); ++extern void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx); + extern u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, + s16 inst, s16 idx); + extern u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, s16 inst, + s16 idx); + extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, + s16 idx); +-extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, ++extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, u16 idx, + u32 mask); + + extern void omap_cm_base_init(void); +--- a/arch/arm/mach-omap2/common.c ++++ b/arch/arm/mach-omap2/common.c +@@ -15,10 +15,14 @@ + #include + #include + #include ++#include ++#include + + #include "common.h" + #include "omap-secure.h" + ++#define AM33XX_DRAM_SYNC_VA 0xfe600000 ++ + /* + * Stub function for OMAP2 so that common files + * continue to build when custom builds are used +@@ -34,3 +38,31 @@ void __init omap_reserve(void) + omap_secure_ram_reserve_memblock(); + omap_barrier_reserve_memblock(); + } ++ ++static phys_addr_t am33xx_paddr; ++static u32 am33xx_size; ++ ++/* Steal one page physical memory for uncached read DeepSleep */ ++void __init am33xx_reserve(void) ++{ ++ am33xx_size = ALIGN(PAGE_SIZE, SZ_1M); ++ am33xx_paddr = arm_memblock_steal(am33xx_size, SZ_1M); ++ ++ omap_reserve(); ++} ++ ++void __iomem *am33xx_dram_sync; ++ ++void __init am33xx_dram_sync_init(void) ++{ ++ struct map_desc dram_io_desc[1]; ++ ++ dram_io_desc[0].virtual = AM33XX_DRAM_SYNC_VA; ++ dram_io_desc[0].pfn = __phys_to_pfn(am33xx_paddr); ++ dram_io_desc[0].length = am33xx_size; ++ dram_io_desc[0].type = MT_MEMORY_SO; ++ ++ iotable_init(dram_io_desc, ARRAY_SIZE(dram_io_desc)); ++ ++ am33xx_dram_sync = (void __iomem *) dram_io_desc[0].virtual; ++} +--- a/arch/arm/mach-omap2/common.h ++++ b/arch/arm/mach-omap2/common.h +@@ -60,7 +60,7 @@ static inline int omap3_pm_init(void) + } + #endif + +-#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4) ++#if defined(CONFIG_PM) && (defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX)) + int omap4_pm_init(void); + #else + static inline int omap4_pm_init(void) +@@ -69,6 +69,15 @@ static inline int omap4_pm_init(void) + } + #endif + ++#if defined(CONFIG_PM) && defined(CONFIG_SOC_AM33XX) ++int am33xx_pm_init(void); ++#else ++static inline int am33xx_pm_init(void) ++{ ++ return 0; ++} ++#endif ++ + #ifdef CONFIG_OMAP_MUX + int omap_mux_late_init(void); + #else +@@ -107,10 +116,14 @@ void omap2430_init_late(void); + void omap3430_init_late(void); + void omap35xx_init_late(void); + void omap3630_init_late(void); ++void am33xx_init_late(void); + void am35xx_init_late(void); + void ti81xx_init_late(void); ++void am33xx_init_late(void); ++void omap5_init_late(void); + int omap2_common_pm_late_init(void); + void dra7xx_init_early(void); ++void dra7xx_init_late(void); + + #ifdef CONFIG_SOC_BUS + void omap_soc_device_init(void); +@@ -136,6 +149,14 @@ static inline void am33xx_restart(enum r + } + #endif + ++#ifdef CONFIG_SOC_AM43XX ++void am43xx_restart(enum reboot_mode mode, const char *cmd); ++#else ++static inline void am43xx_restart(enum reboot_mode mode, const char *cmd) ++{ ++} ++#endif ++ + #ifdef CONFIG_ARCH_OMAP3 + void omap3xxx_restart(enum reboot_mode mode, const char *cmd); + #else +@@ -152,6 +173,14 @@ static inline void omap44xx_restart(enum + } + #endif + ++#if defined(CONFIG_SUSPEND) ++void omap2_common_suspend_init(void); ++#else ++inline void omap2_common_suspend_init(void); ++{ ++} ++#endif ++ + /* This gets called from mach-omap2/io.c, do not call this */ + void __init omap2_set_globals_tap(u32 class, void __iomem *tap); + +@@ -165,7 +194,6 @@ void __init ti81xx_map_io(void); + + /* omap_barriers_init() is OMAP4 only */ + void omap_barriers_init(void); +- + /** + * omap_test_timeout - busy-loop, testing a condition + * @cond: condition to test until it evaluates to true +@@ -259,6 +287,8 @@ extern int omap4_enter_lowpower(unsigned + extern int omap4_finish_suspend(unsigned long cpu_state); + extern void omap4_cpu_resume(void); + extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); ++extern int omap5_finish_suspend(unsigned long cpu_state); ++extern void omap5_cpu_resume(void); + #else + static inline int omap4_enter_lowpower(unsigned int cpu, + unsigned int power_state) +@@ -286,6 +316,14 @@ static inline int omap4_finish_suspend(u + static inline void omap4_cpu_resume(void) + {} + ++static inline int omap5_finish_suspend(unsigned long cpu_state) ++{ ++ return 0; ++} ++ ++static inline void omap5_cpu_resume(void) ++{} ++ + #endif + + struct omap_sdrc_params; +@@ -295,11 +333,17 @@ struct omap2_hsmmc_info; + extern int omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers); + extern void omap_reserve(void); + ++extern void am33xx_reserve(void); ++extern void am33xx_dram_sync_init(void); ++extern void __iomem *am33xx_dram_sync; ++ + struct omap_hwmod; + extern int omap_dss_reset(struct omap_hwmod *); + + /* SoC specific clock initializer */ + extern int (*omap_clk_init)(void); + ++int __init omapdss_init_of(void); ++ + #endif /* __ASSEMBLER__ */ + #endif /* __ARCH_ARM_MACH_OMAP2PLUS_COMMON_H */ +--- a/arch/arm/mach-omap2/devices.c ++++ b/arch/arm/mach-omap2/devices.c +@@ -37,6 +37,7 @@ + #include "mux.h" + #include "control.h" + #include "devices.h" ++#include "display.h" + + #define L3_MODULES_MAX_LEN 12 + #define L3_MODULES 3 +@@ -466,13 +467,13 @@ static struct platform_device omap_vout_ + .resource = &omap_vout_resource[0], + .id = -1, + }; +-static void omap_init_vout(void) ++ ++int __init omap_init_vout(void) + { +- if (platform_device_register(&omap_vout_device) < 0) +- printk(KERN_ERR "Unable to register OMAP-VOUT device\n"); ++ return platform_device_register(&omap_vout_device); + } + #else +-static inline void omap_init_vout(void) {} ++int __init omap_init_vout(void) { return 0; } + #endif + + #if IS_ENABLED(CONFIG_WL12XX) +@@ -524,9 +525,9 @@ static int __init omap2_init_devices(voi + omap_init_audio(); + omap_init_camera(); + omap_init_hdmi_audio(); +- omap_init_mbox(); + /* If dtb is there, the devices will be created dynamically */ + if (!of_have_populated_dt()) { ++ omap_init_mbox(); + omap_init_mcspi(); + omap_init_sham(); + omap_init_aes(); +@@ -536,7 +537,6 @@ static int __init omap2_init_devices(voi + omap_init_wl12xx_of(); + } + omap_init_sti(); +- omap_init_vout(); + + return 0; + } +--- a/arch/arm/mach-omap2/display.c ++++ b/arch/arm/mach-omap2/display.c +@@ -23,6 +23,8 @@ + #include + #include + #include ++#include ++#include + + #include