From d76b25938cafac8c77042334f7975e880404c448 Mon Sep 17 00:00:00 2001 From: David Bauer Date: Thu, 24 Mar 2022 23:09:24 +0100 Subject: mpc85xx: overhaul WS-AP3825i LED setup As the LED controller is working now, we can make good use of the LEDs now. - Drop the model-name prefix - Rename eth0 / eth1 LEDs to LAN1 / LAN2, as they are labeled as such on the casing - Enable wired LEDs in userspace Signed-off-by: David Bauer (cherry picked from commit 9024f1e466f5ab64bc752d8a463d1867a2ba8d8e) --- .../linux/mpc85xx/base-files/etc/board.d/01_leds | 19 +++++++++++++++++ .../files/arch/powerpc/boot/dts/ws-ap3825i.dts | 24 +++++++++++----------- 2 files changed, 31 insertions(+), 12 deletions(-) create mode 100644 target/linux/mpc85xx/base-files/etc/board.d/01_leds (limited to 'target/linux') diff --git a/target/linux/mpc85xx/base-files/etc/board.d/01_leds b/target/linux/mpc85xx/base-files/etc/board.d/01_leds new file mode 100644 index 0000000000..391c909e4c --- /dev/null +++ b/target/linux/mpc85xx/base-files/etc/board.d/01_leds @@ -0,0 +1,19 @@ + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +case $board in +extreme-networks,ws-ap3825i) + ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth1" + ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth0" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts index b4a90b31c7..aba7739d0d 100644 --- a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts @@ -54,44 +54,44 @@ wifi1 { gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:green:radio1"; + label = "green:radio1"; linux,default-trigger = "phy0tpt"; }; wifi2 { gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:green:radio2"; + label = "green:radio2"; linux,default-trigger = "phy1tpt"; }; led_power_green: power_green { gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:green:power"; + label = "green:power"; }; led_power_red: power_red { gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:red:power"; + label = "red:power"; }; - eth0_red { + lan1_red { gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:red:eth0"; + label = "red:lan1"; }; - eth0_green { + lan1_green { gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:green:eth0"; + label = "green:lan1"; }; - eth1_red { + lan2_red { gpios = <&spi_gpio 7 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:red:eth1"; + label = "red:lan2"; }; - eth1_green { + lan2_green { gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>; - label = "ws-ap3825i:green:eth1"; + label = "green:lan2"; }; }; -- cgit v1.2.3