From d3dd24063d11fd08c6c2ed98ed80b0499f14f85e Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Fri, 18 Mar 2022 23:36:41 +0100 Subject: lantiq: fritz736x: Move GPIO resets to the inidvidual board.dts files FRITZ!Box 7360 V2 and FRITZ!Box 7360 SL both use GPIOs 37 (for &phy0) and GPIO 44 (for &phy1) to control the PHY's reset lines. FRITZ!Box 7362 SL however uses GPIO 45 (for &phy0) and GPIO 44 (for &phy1). Move the GPIO reset definitions to each individual board .dts and while at it, fix the GPIOs for the FRITZ!Box 7362 SL. Signed-off-by: Martin Blumenstingl (cherry picked from commit 56cd49bdc8ff762c52327ee7faa14cb99895e0fd) --- .../mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts | 30 +++++++++++++++++---- .../mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts | 31 ++++++++++++++++++---- .../mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts | 31 ++++++++++++++++++---- .../mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi | 17 ------------ 4 files changed, 77 insertions(+), 32 deletions(-) (limited to 'target/linux') diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts index 8881745819..063d6dca5e 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360-v2.dts @@ -7,11 +7,23 @@ model = "AVM FRITZ!Box 7360 V2"; }; -&state_default { - pcie-rst { - lantiq,pins = "io21"; - lantiq,pull = <0>; - lantiq,output = <1>; +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; }; }; @@ -58,6 +70,14 @@ mac-address-increment = <(-2)>; }; +&phy0 { + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; +}; + +&phy1 { + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; +}; + &urlader { compatible = "nvmem-cells"; #address-cells = <1>; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts index 945c553688..31523eaae0 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7360sl.dts @@ -7,12 +7,25 @@ model = "AVM FRITZ!Box 7360 SL"; }; -&state_default { - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; }; + }; &localbus { @@ -58,6 +71,14 @@ mac-address-increment = <(-2)>; }; +&phy0 { + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; +}; + +&phy1 { + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; +}; + &urlader { compatible = "nvmem-cells"; #address-cells = <1>; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts index c75edd933c..7995b34971 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz7362sl.dts @@ -7,12 +7,25 @@ model = "AVM FRITZ!Box 7362 SL"; }; -&state_default { - pcie-rst { - lantiq,pins = "io21"; - lantiq,open-drain = <1>; - lantiq,output = <1>; +&gpio { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + + phy-rst { + lantiq,pins = "io44", "io45"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; }; + }; &spi { @@ -96,6 +109,14 @@ mac-address-increment = <(-2)>; }; +&phy0 { + reset-gpios = <&gpio 45 GPIO_ACTIVE_LOW>; +}; + +&phy1 { + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; +}; + &urlader { compatible = "nvmem-cells"; #address-cells = <1>; diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi index 8406539f69..73f6e152bf 100644 --- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi +++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/vr9_avm_fritz736x.dtsi @@ -88,21 +88,6 @@ lantiq,gphy-mode = ; }; -&gpio { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - phy-rst { - lantiq,pins = "io37", "io44"; - lantiq,pull = <0>; - lantiq,open-drain; - lantiq,output = <1>; - }; - }; - -}; - &gswip { pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; @@ -111,12 +96,10 @@ &gswip_mdio { phy0: ethernet-phy@0 { reg = <0x00>; - reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; }; phy1: ethernet-phy@1 { reg = <0x01>; - reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; }; phy11: ethernet-phy@11 { -- cgit v1.2.3