From d38ffd8cd916ac23e4247816ab3f4575bd036566 Mon Sep 17 00:00:00 2001 From: Conor O'Gorman Date: Sun, 15 Jan 2017 22:01:04 +0000 Subject: ar71xx: add Abicom SC450 support Support Abicom International Scorpion SC450 Board QCA9550 700MHz Extended Temperature Range 256MB DDR2 256MB NAND Flash 16MB NOR Flash 10/100/1000 Ethernet 15W Max, 3x3 Mode, Full Power TX Power 802.3-at POE+ & DC Input options 100x 85mm USB PCIe SFP GPIO/LED Signed-off-by: Conor O'Gorman --- target/linux/ar71xx/base-files/etc/board.d/01_leds | 3 + target/linux/ar71xx/base-files/etc/diag.sh | 1 + target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 + .../ar71xx/base-files/lib/upgrade/platform.sh | 1 + target/linux/ar71xx/config-4.4 | 1 + .../ar71xx/files/arch/mips/ath79/Kconfig.openwrt | 11 ++ target/linux/ar71xx/files/arch/mips/ath79/Makefile | 1 + .../ar71xx/files/arch/mips/ath79/mach-sc450.c | 149 +++++++++++++++++++++ .../linux/ar71xx/files/arch/mips/ath79/machtypes.h | 1 + target/linux/ar71xx/image/generic.mk | 10 ++ 10 files changed, 181 insertions(+) create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c (limited to 'target/linux') diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index 57925c5aae..58f1dd6116 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -440,6 +440,9 @@ re450) ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "$board:blue:wlan2g" "phy1tpt" ucidef_set_led_wlan "wlan5g" "WLAN 5 GHz" "$board:blue:wlan5g" "phy0tpt" ;; +sc450) + ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt" + ;; smart-300) ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0" ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04" diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 551088b060..83a0e50197 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -44,6 +44,7 @@ get_status_led() { mr12|\ mr16|\ nbg6616|\ + sc450|\ tl-wpa8630) status_led="$board:green:power" ;; diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index fb8997fe89..6c3396b6a5 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -887,6 +887,9 @@ ar71xx_board_detect() { *SC300M) name="sc300m" ;; + *SC450) + name="sc450" + ;; *"SMART-300") name="smart-300" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index d98f2733f5..f50dd80ef3 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -255,6 +255,7 @@ platform_check_image() { rocket-m|\ rw2458n|\ sc300m|\ + sc450|\ sr3200|\ tew-632brp|\ tew-712br|\ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index dc5ed1eb57..b6345d6705 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -149,6 +149,7 @@ CONFIG_ATH79_MACH_R6100=y CONFIG_ATH79_MACH_RE450=y CONFIG_ATH79_MACH_RW2458N=y CONFIG_ATH79_MACH_SC300M=y +CONFIG_ATH79_MACH_SC450=y CONFIG_ATH79_MACH_SMART_300=y CONFIG_ATH79_MACH_SOM9331=y CONFIG_ATH79_MACH_SR3200=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 8514ff94bf..28555060d1 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -53,6 +53,17 @@ config ATH79_MACH_SC300M select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_SC450 + bool "Abicom SC450 board support" + select SOC_QCA955X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_ALL0258N bool "Allnet ALL0258N support" select SOC_AR724X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 973f4ef0a7..9d6b6b90bf 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -153,6 +153,7 @@ obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o obj-$(CONFIG_ATH79_MACH_RE450) += mach-re450.o obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o obj-$(CONFIG_ATH79_MACH_SC300M) += mach-sc300m.o +obj-$(CONFIG_ATH79_MACH_SC450) += mach-sc450.o obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o obj-$(CONFIG_ATH79_MACH_SOM9331) += mach-som9331.o obj-$(CONFIG_ATH79_MACH_SR3200) += mach-sr3200.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c new file mode 100644 index 0000000000..9cd0815156 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-sc450.c @@ -0,0 +1,149 @@ +/* + * Abicom International Scorpion SC450 support. + * + * Copyright (c) 2012 Qualcomm Atheros + * Copyright (c) 2012-2013 Gabor Juhos + * Copyright (c) 2017 Conor O'Gorman + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include + +#include + +#include "common.h" +#include "pci.h" +#include "dev-ap9x-pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-nfc.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define SC450_GPIO_LED_POWER 13 +#define SC450_GPIO_LED_ERR1 14 +#define SC450_GPIO_LED_ERR2 15 +#define SC450_GPIO_LED_WLAN 16 +#define SC450_GPIO_BTN_RESET 17 +#define SC450_GPIO_WP 18 +#define SC450_GPIO_POE 19 +#define SC450_GPIO_RX_LOS 20 +#define SC450_GPIO_MOD_GND 21 +#define SC450_GPIO_MOD_SCL 22 +#define SC450_GPIO_MOD_SDA 23 + +#define SC450_KEYS_POLL_INTERVAL 20 /* msecs */ +#define SC450_KEYS_DEBOUNCE_INTERVAL (3 * SC450_KEYS_POLL_INTERVAL) + +#define SC450_MAC0_OFFSET 0 +#define SC450_MAC1_OFFSET 6 +#define SC450_WMAC_CALDATA_OFFSET 0x1000 +#define SC450_PCIE_CALDATA_OFFSET 0x5000 + +static struct gpio_led sc450_leds_gpio[] __initdata = { + { + .name = "sc450:green:power", + .gpio = SC450_GPIO_LED_POWER, + .active_low = 1, + }, + { + .name = "sc450:red:power", + .gpio = SC450_GPIO_LED_ERR1, + .active_low = 1, + }, + { + .name = "sc450:green:wlan", + .gpio = SC450_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "sc450:red:wlan", + .gpio = SC450_GPIO_LED_ERR2, + .active_low = 1, + } +}; + +static struct gpio_keys_button sc450_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = SC450_KEYS_DEBOUNCE_INTERVAL, + .gpio = SC450_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +static struct at803x_platform_data at803x_data = { + .disable_smarteee = 1, + .enable_rgmii_rx_delay = 0, + .enable_rgmii_tx_delay = 0, +}; + +static struct mdio_board_info sc450_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 1, + .platform_data = &at803x_data, + }, +}; + +static void __init sc450_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(sc450_leds_gpio), + sc450_leds_gpio); + ath79_register_gpio_keys_polled(-1, SC450_KEYS_POLL_INTERVAL, + ARRAY_SIZE(sc450_gpio_keys), + sc450_gpio_keys); + + ath79_register_usb(); + ath79_register_nfc(); + + ath79_register_wmac(art + SC450_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_mdio(0, 0); + mdiobus_register_board_info(sc450_mdio0_info, + ARRAY_SIZE(sc450_mdio0_info)); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + SC450_MAC0_OFFSET, 0); + + ath79_eth0_pll_data.pll_1000 = 0xa6000101; + ath79_eth0_pll_data.pll_100 = 0xa4000101; + /* GMAC0 is connected to the RMGII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = 0xF; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + + ath79_register_eth(0); + + /* GMAC1 is connected to the SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + + ath79_register_eth(1); + + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_SC450, "SC450", "Abicom SC450", sc450_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 93bb5947d3..03fdc5e51d 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -170,6 +170,7 @@ enum ath79_mach_type { ATH79_MACH_RE450, /* TP-LINK RE450 */ ATH79_MACH_RW2458N, /* Redwave RW2458N */ ATH79_MACH_SC300M, /* Abicom SC300M */ + ATH79_MACH_SC450, /* Abicom SC450 */ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ ATH79_MACH_SOM9331, /* OpenEmbed SOM9331 */ ATH79_MACH_SR3200, /* YunCore SR3200 */ diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk index f8445b5193..02b90b0aa6 100644 --- a/target/linux/ar71xx/image/generic.mk +++ b/target/linux/ar71xx/image/generic.mk @@ -474,6 +474,16 @@ define Device/sc300m endef TARGET_DEVICES += sc300m +define Device/sc450 + DEVICE_TITLE := Abicom SC450 + DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport + BOARDNAME = SC450 + IMAGE_SIZE = 15744k + CONSOLE = ttyS0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART) +endef +TARGET_DEVICES += sc450 + define Device/smart-300 $(Device/tplink-8mlzma) DEVICE_TITLE := NC-LINK SMART-300 -- cgit v1.2.3