From 9d558fb48ea1f33acea15a250bd7b817a8a6b6fc Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Sun, 17 Jan 2016 19:55:25 +0000
Subject: lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsi

This removes the duplicate SPI register definition.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48287
---
 target/linux/lantiq/dts/TDW89X0.dtsi | 76 +++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 40 deletions(-)

(limited to 'target/linux')

diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi
index 99b4ecb7cb..30225d5cc1 100644
--- a/target/linux/lantiq/dts/TDW89X0.dtsi
+++ b/target/linux/lantiq/dts/TDW89X0.dtsi
@@ -21,46 +21,6 @@
 	};
 
 	fpi@10000000 {
-		spi@E100800 {
-			compatible = "lantiq,spi-xway";
-			reg = <0xE100800 0x100>;
-			interrupt-parent = <&icu0>;
-			interrupts = <22 23 24>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "jedec,spi-nor";
-				reg = <3 0>;
-				spi-max-frequency = <33250000>;
-				m25p,fast-read;
-
-				partition@0 {
-					reg = <0x0 0x20000>;
-					label = "u-boot";
-					read-only;
-				};
-
-				partition@20000 {
-					reg = <0x20000 0x7a0000>;
-					label = "firmware";
-				};
-
-				partition@7c0000 {
-					reg = <0x7c0000 0x10000>;
-					label = "config";
-					read-only;
-				};
-
-				ath9k_cal: partition@7d0000 {
-					reg = <0x7d0000 0x30000>;
-					label = "boardconfig";
-					read-only;
-				};
-			};
-		};
-
 		gpio: pinmux@E100B10 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
@@ -249,3 +209,39 @@
 		};
 	};
 };
+
+&spi {
+	status = "ok";
+
+	m25p80@3 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <3 0>;
+		spi-max-frequency = <33250000>;
+		m25p,fast-read;
+
+		partition@0 {
+			reg = <0x0 0x20000>;
+			label = "u-boot";
+			read-only;
+		};
+
+		partition@20000 {
+			reg = <0x20000 0x7a0000>;
+			label = "firmware";
+		};
+
+		partition@7c0000 {
+			reg = <0x7c0000 0x10000>;
+			label = "config";
+			read-only;
+		};
+
+		ath9k_cal: partition@7d0000 {
+			reg = <0x7d0000 0x30000>;
+			label = "boardconfig";
+			read-only;
+		};
+	};
+};
-- 
cgit v1.2.3