From 67fced9ba336dd69c5a35aec3157db4b158a9e2d Mon Sep 17 00:00:00 2001 From: Pawel Dembicki Date: Mon, 19 Mar 2018 19:15:29 +0100 Subject: ramips: add support for DLINK DIR-510L MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The DIR-510L Wireless Router are based on the MT7620A SoC. Specification: -MediaTek MT7620A (580 Mhz) -128 MB of RAM -16 MB of FLASH -802.11bgn radio -1x 10/100 Mbps Ethernet -2x internal, non-detachable antennas -UART (J3) header on PCB (57600 8n1) -1x bi-color LED (GPIO-controlled), 2x button -JBOOT bootloader Known issues: -Ethernet port is used as LAN -No communication with charger IC. (uart bitbang needed) Installation: Apply factory image via d-link http web-gui. How to revert to OEM firmware: 1.) Push the reset button and turn on the power. Wait until LED start blinking (~10sec.) 2.) Upload original factory image via JBOOT http (IP: 192.168.123.254) 3.) If http doesn't work, it can be done with curl command: curl -F FN=@XXXXX.bin http://192.168.123.254/upg where XXXXX.bin is name of firmware file. Signed-off-by: Pawel Dembicki [fixed whitespace issue in 10-rt2x00-eeprom] Signed-off-by: Petr Štetiar --- .../linux/ramips/base-files/etc/board.d/02_network | 2 + .../ramips/base-files/etc/board.d/03_gpio_switches | 4 + .../etc/hotplug.d/firmware/10-rt2x00-eeprom | 1 + target/linux/ramips/dts/DIR-510L.dts | 142 +++++++++++++++++++++ target/linux/ramips/image/mt7620.mk | 12 ++ 5 files changed, 161 insertions(+) create mode 100644 target/linux/ramips/dts/DIR-510L.dts (limited to 'target/linux') diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index bf71aef5ec..bb5ff483c4 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -365,6 +365,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0" ;; + dlink,dir-510l|\ re350-v1) ucidef_add_switch "switch0" \ "0:lan" "6@eth0" @@ -513,6 +514,7 @@ ramips_setup_macs() lan_mac=$(mtd_get_mac_ascii factory lanmac) wan_mac=$(mtd_get_mac_ascii factory wanmac) ;; + dlink,dir-510l|\ dlink,dwr-116-a1|\ dlink,dwr-118-a1|\ dlink,dwr-118-a2|\ diff --git a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches index a5f9124d12..80e3c4c41f 100755 --- a/target/linux/ramips/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ramips/base-files/etc/board.d/03_gpio_switches @@ -7,6 +7,10 @@ board_config_update board=$(board_name) case "$board" in +dlink,dir-510l) + ucidef_add_gpio_switch "usb_enable1" "USB 1A enable" "12" "0" + ucidef_add_gpio_switch "usb_enable05" "USB 0.5A enable" "13" "1" + ;; mikrotik,rb750gr3) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "17" ;; diff --git a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom index 96a2397191..fc044c123e 100644 --- a/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom +++ b/target/linux/ramips/base-files/etc/hotplug.d/firmware/10-rt2x00-eeprom @@ -54,6 +54,7 @@ board=$(board_name) case "$FIRMWARE" in "soc_wmac.eeprom") case $board in + dlink,dir-510l|\ dlink,dwr-116-a1|\ dlink,dwr-118-a1|\ dlink,dwr-118-a2|\ diff --git a/target/linux/ramips/dts/DIR-510L.dts b/target/linux/ramips/dts/DIR-510L.dts new file mode 100644 index 0000000000..885e64f9f2 --- /dev/null +++ b/target/linux/ramips/dts/DIR-510L.dts @@ -0,0 +1,142 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7620a.dtsi" + +#include +#include + +/ { + compatible = "dlink,dir-510l", "ralink,mt7620a-soc"; + model = "D-Link DIR-510L"; + + aliases { + led-boot = &led_status; + led-failsafe = &led_status; + led-running = &led_status; + led-upgrade = &led_status; + }; + + chosen { + bootargs = "console=ttyS1,57600"; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status: status { + label = "dir-510l:green:status"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + + status-red { + label = "dir-510l:red:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + }; + + }; +}; + +ðernet { + mediatek,portmap = "llllw"; +}; + +&uart { + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "jboot"; + reg = <0x0 0x10000>; + read-only; + }; + + partition@10000 { + label = "recovery"; + reg = <0x10000 0x200000>; + read-only; + }; + + partition@210000 { + compatible = "amit,jimage"; + label = "firmware"; + reg = <0x210000 0xde0000>; + }; + + config: partition@ff0000 { + label = "config"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +&ehci { + status = "okay"; +}; + +&ohci { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + mt76x0e@0,0 { + reg = <0x0000 0 0 0 0>; + mtd-mac-address = <&config 0xe490>; + mtd-mac-address-increment = <(2)>; + mediatek,mtd-eeprom = <&config 0xe05d>; + }; +}; + +&gsw { + mediatek,port4 = "ephy"; +}; + +&pinctrl { + state_default: pinctrl0 { + default { + ralink,group = "i2c", "uartf"; + ralink,function = "gpio"; + }; + }; +}; + diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 234b6df098..da90568df0 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -190,6 +190,18 @@ define Device/dir-810l endef TARGET_DEVICES += dir-810l +define Device/dlink_dir-510l + $(Device/amit_jboot) + DTS := DIR-510L + DEVICE_TITLE := D-Link DIR-510L + DEVICE_PACKAGES += kmod-mt76x0e + DLINK_ROM_ID := DLK6E3805001 + DLINK_FAMILY_MEMBER := 0x6E38 + DLINK_FIRMWARE_SIZE := 0xDE0000 + DLINK_IMAGE_OFFSET := 0x210000 +endef +TARGET_DEVICES += dlink_dir-510l + define Device/dlink_dwr-116-a1 $(Device/amit_jboot) DTS := DWR-116-A1 -- cgit v1.2.3