From 20eb45da4fc19c12ea2073471992eeaf9d602fa5 Mon Sep 17 00:00:00 2001 From: Jan Alexander Date: Wed, 29 Jan 2020 15:03:18 +0100 Subject: ramips: use tpt DTS trigger for TP-Link TL-MR3020 v3 and TL-WA801ND v5 This converts the TP-Link TL-MR3020v3 board to use the WLAN throughput LED trigger in order to react to all VAPs. It also moves the WLAN trigger config of the TP-Link TL-WA801NDv5 to the DTS and merges the now identical LAN LED configs. Verified these changes on a TL-MR3020v3. Signed-off-by: Jan Alexander [changed commit title and extended commit message] Signed-off-by: Adrian Schmutzler --- target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts | 1 + target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts | 1 + target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 10 +++------- 3 files changed, 5 insertions(+), 7 deletions(-) (limited to 'target/linux') diff --git a/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts b/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts index fa69110d45..cf0f5eb796 100644 --- a/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts +++ b/target/linux/ramips/dts/mt7628an_tplink_tl-mr3020-v3.dts @@ -61,6 +61,7 @@ wlan { label = "tl-mr3020-v3:green:wlan"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wps { diff --git a/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts b/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts index d2cb271efb..7b9033202c 100644 --- a/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts +++ b/target/linux/ramips/dts/mt7628an_tplink_tl-wa801nd-v5.dts @@ -48,6 +48,7 @@ wlan { label = "tl-wa801nd-v5:green:wlan"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; }; wps_red { diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 79f45ba545..877dbb60bd 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -64,9 +64,9 @@ tplink,archer-c50-v4) ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "wlan5g" "$boardname:green:wlan5g" "phy1tpt" ;; -tplink,tl-mr3020-v3) - set_wifi_led "$boardname:green:wlan" - ucidef_set_led_netdev "lan" "LAN" "$boardname:green:lan" "eth0" +tplink,tl-mr3020-v3|\ +tplink,tl-wa801nd-v5) + ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" ;; tplink,tl-mr3420-v5|\ tplink,tl-wr842n-v5) @@ -74,10 +74,6 @@ tplink,tl-wr842n-v5) ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01" ;; -tplink,tl-wa801nd-v5) - ucidef_set_led_wlan "wlan" "wlan" "$boardname:green:wlan" "phy0tpt" - ucidef_set_led_netdev "lan" "lan" "$boardname:green:lan" "eth0" - ;; tplink,tl-wr840n-v4) ucidef_set_led_wlan "wlan2g" "wlan2g" "$boardname:green:wlan" "phy0tpt" ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e" -- cgit v1.2.3