From 15a14cf1665ef3d8b5c77cce69b52d131340e3b3 Mon Sep 17 00:00:00 2001 From: Yutang Jiang Date: Sat, 29 Oct 2016 00:18:23 +0800 Subject: layerscape: add 64b/32b target for ls1012ardb device The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang --- target/linux/layerscape/64b/profiles/00-default.mk | 4 +- target/linux/layerscape/base-files/etc/rc.local | 4 + target/linux/layerscape/config-4.4 | 2 + target/linux/layerscape/image/Makefile | 24 + target/linux/layerscape/modules.mk | 20 + .../1074-mtd-nand-spi-nor-assign-MTD-of_node.patch | 31 + ...r-convert-to-spi_nor_-get-set-_flash_node.patch | 80 + ...or-drop-unnecessary-partition-parser-data.patch | 83 + ...td-add-get-set-of_node-flash_node-helpers.patch | 62 + .../1078-mtd-spi-nor-drop-flash_node-field.patch | 57 + ...-remove-unnecessary-leading-space-from-db.patch | 27 + ...mtd-fsl-quadspi-possible-NULL-dereference.patch | 50 + ...-provide-default-erase_sector-implementat.patch | 105 + ...-Fix-error-message-with-unrecognized-JEDE.patch | 31 + ...i-nor-fix-error-handling-in-spi_nor_erase.patch | 39 + ...i-nor-Check-the-return-value-from-read_sr.patch | 58 + ...-wait-until-lock-unlock-operations-are-re.patch | 66 + ...pi-nor-fsl-quadspi-add-big-endian-support.patch | 400 + ...i-nor-fsl-quadspi-add-support-for-ls1021a.patch | 63 + ...or-fsl-quadspi-add-support-for-layerscape.patch | 28 + ...-mtd-spi-nor-Add-SPI-NOR-layer-PM-support.patch | 137 + ...spi-nor-change-return-value-of-read-write.patch | 82 + ...dspi-return-amount-of-data-read-written-o.patch | 73 + ...pi-nor-check-return-value-from-read-write.patch | 127 + ...94-mtd-spi-nor-stop-passing-around-retlen.patch | 215 + .../1095-mtd-spi-nor-simplify-write-loop.patch | 100 + .../1096-mtd-spi-nor-add-read-loop.patch | 46 + ...uadspi-use-the-property-fields-of-SPI-NOR.patch | 87 + ...dspi-Rename-SEQID_QUAD_READ-to-SEQID_READ.patch | 46 + ...or-fsl-quadspi-Add-fast-read-mode-support.patch | 72 + ...pi_nor-Disable-Micron-flash-HW-protection.patch | 41 + ...-fsl-quadspi-extend-support-for-some-spec.patch | 122 + ...-nor-fsl-quadspi-Support-qspi-for-ls2080a.patch | 83 + ...-nor-Support-R-W-for-S25FS-S-family-flash.patch | 110 + ...l-quadspi-Add-quad-mode-for-flash-n25q128.patch | 112 + ...105-mtd-spi-nor-add-DDR-quad-read-support.patch | 181 + ...sl-quadspi-add-DDR-quad-read-for-Spansion.patch | 122 + ...d-fsl-quadspi-disable-AHB-buffer-prefetch.patch | 67 + ...adspi-add-multi-flash-chip-R-W-on-ls2080a.patch | 42 + ...s-mtd-spi-nor-Enable-QSPI-Flash-in-Kernel.patch | 36 + ...or-fsl-quad-add-flash-S25FS-extra-support.patch | 157 + ...nor-disable-4kb-sector-erase-for-s25fl128.patch | 27 + ...fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch | 29 + ...-fsl-quad-move-mtd_device_register-to-the.patch | 49 + ...mv8-aarch32-defconfig-Enable-CAAM-support.patch | 31 + ...aarch32-defconfig-Enable-firmware-loading.patch | 23 + ...32-defconfig-Enable-support-for-AHCI-SATA.patch | 29 + ...32-defconfig-Enable-USB-and-related-confi.patch | 31 + ...32-defconfig-Enable-KVM-related-configura.patch | 59 + ...arch32-defconfig-Enable-FTM-alarm-support.patch | 23 + ...dd-device-tree-for-ls1012a-SoC-and-boards.patch | 880 ++ ...ch32-Run-32-bit-Linux-for-LayerScape-SoCs.patch | 49 + ...ch32-Add-KVM-support-for-AArch32-on-ARMv8.patch | 34 + .../7072-LS1012-Add-PPFE-driver-in-Linux.patch | 15167 +++++++++++++++++++ .../8073-ls1012a-added-clock-configuration.patch | 61 + .../8114-drivers-PCIE-enable-for-Linux.patch | 49 + ...ape-call-dw_pcie_setup_rc-in-host-initial.patch | 30 + 57 files changed, 19862 insertions(+), 1 deletion(-) create mode 100644 target/linux/layerscape/base-files/etc/rc.local create mode 100644 target/linux/layerscape/modules.mk create mode 100644 target/linux/layerscape/patches-4.4/1074-mtd-nand-spi-nor-assign-MTD-of_node.patch create mode 100644 target/linux/layerscape/patches-4.4/1075-mtd-spi-nor-convert-to-spi_nor_-get-set-_flash_node.patch create mode 100644 target/linux/layerscape/patches-4.4/1076-mtd-spi-nor-drop-unnecessary-partition-parser-data.patch create mode 100644 target/linux/layerscape/patches-4.4/1077-mtd-add-get-set-of_node-flash_node-helpers.patch create mode 100644 target/linux/layerscape/patches-4.4/1078-mtd-spi-nor-drop-flash_node-field.patch create mode 100644 target/linux/layerscape/patches-4.4/1079-mtd-spi-nor-remove-unnecessary-leading-space-from-db.patch create mode 100644 target/linux/layerscape/patches-4.4/1080-mtd-fsl-quadspi-possible-NULL-dereference.patch create mode 100644 target/linux/layerscape/patches-4.4/1081-mtd-spi-nor-provide-default-erase_sector-implementat.patch create mode 100644 target/linux/layerscape/patches-4.4/1083-mtd-spi-nor-Fix-error-message-with-unrecognized-JEDE.patch create mode 100644 target/linux/layerscape/patches-4.4/1084-mtd-spi-nor-fix-error-handling-in-spi_nor_erase.patch create mode 100644 target/linux/layerscape/patches-4.4/1085-mtd-spi-nor-Check-the-return-value-from-read_sr.patch create mode 100644 target/linux/layerscape/patches-4.4/1086-mtd-spi-nor-wait-until-lock-unlock-operations-are-re.patch create mode 100644 target/linux/layerscape/patches-4.4/1087-mtd-spi-nor-fsl-quadspi-add-big-endian-support.patch create mode 100644 target/linux/layerscape/patches-4.4/1088-mtd-spi-nor-fsl-quadspi-add-support-for-ls1021a.patch create mode 100644 target/linux/layerscape/patches-4.4/1089-mtd-spi-nor-fsl-quadspi-add-support-for-layerscape.patch create mode 100644 target/linux/layerscape/patches-4.4/1090-mtd-spi-nor-Add-SPI-NOR-layer-PM-support.patch create mode 100644 target/linux/layerscape/patches-4.4/1091-mtd-spi-nor-change-return-value-of-read-write.patch create mode 100644 target/linux/layerscape/patches-4.4/1092-mtd-fsl-quadspi-return-amount-of-data-read-written-o.patch create mode 100644 target/linux/layerscape/patches-4.4/1093-mtd-spi-nor-check-return-value-from-read-write.patch create mode 100644 target/linux/layerscape/patches-4.4/1094-mtd-spi-nor-stop-passing-around-retlen.patch create mode 100644 target/linux/layerscape/patches-4.4/1095-mtd-spi-nor-simplify-write-loop.patch create mode 100644 target/linux/layerscape/patches-4.4/1096-mtd-spi-nor-add-read-loop.patch create mode 100644 target/linux/layerscape/patches-4.4/1097-mtd-fsl-quadspi-use-the-property-fields-of-SPI-NOR.patch create mode 100644 target/linux/layerscape/patches-4.4/1098-mtd-fsl-quadspi-Rename-SEQID_QUAD_READ-to-SEQID_READ.patch create mode 100644 target/linux/layerscape/patches-4.4/1099-mtd-spi-nor-fsl-quadspi-Add-fast-read-mode-support.patch create mode 100644 target/linux/layerscape/patches-4.4/1100-mtd-spi_nor-Disable-Micron-flash-HW-protection.patch create mode 100644 target/linux/layerscape/patches-4.4/1101-mtd-spi-nor-fsl-quadspi-extend-support-for-some-spec.patch create mode 100644 target/linux/layerscape/patches-4.4/1102-mtd-spi-nor-fsl-quadspi-Support-qspi-for-ls2080a.patch create mode 100644 target/linux/layerscape/patches-4.4/1103-mtd-spi-nor-Support-R-W-for-S25FS-S-family-flash.patch create mode 100644 target/linux/layerscape/patches-4.4/1104-mtd-fsl-quadspi-Add-quad-mode-for-flash-n25q128.patch create mode 100644 target/linux/layerscape/patches-4.4/1105-mtd-spi-nor-add-DDR-quad-read-support.patch create mode 100644 target/linux/layerscape/patches-4.4/1106-mtd-fsl-quadspi-add-DDR-quad-read-for-Spansion.patch create mode 100644 target/linux/layerscape/patches-4.4/1107-mtd-fsl-quadspi-disable-AHB-buffer-prefetch.patch create mode 100644 target/linux/layerscape/patches-4.4/1108-mtd-fsl-quadspi-add-multi-flash-chip-R-W-on-ls2080a.patch create mode 100644 target/linux/layerscape/patches-4.4/1109-drivers-mtd-spi-nor-Enable-QSPI-Flash-in-Kernel.patch create mode 100644 target/linux/layerscape/patches-4.4/1110-mtd-spi-nor-fsl-quad-add-flash-S25FS-extra-support.patch create mode 100644 target/linux/layerscape/patches-4.4/1111-mtd-spi-nor-disable-4kb-sector-erase-for-s25fl128.patch create mode 100644 target/linux/layerscape/patches-4.4/1112-driver-spi-fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch create mode 100644 target/linux/layerscape/patches-4.4/1113-mtd-spi-nor-fsl-quad-move-mtd_device_register-to-the.patch create mode 100644 target/linux/layerscape/patches-4.4/2119-armv8-aarch32-defconfig-Enable-CAAM-support.patch create mode 100644 target/linux/layerscape/patches-4.4/2120-armv8-aarch32-defconfig-Enable-firmware-loading.patch create mode 100644 target/linux/layerscape/patches-4.4/2121-armv8-aarch32-defconfig-Enable-support-for-AHCI-SATA.patch create mode 100644 target/linux/layerscape/patches-4.4/2122-armv8-aarch32-defconfig-Enable-USB-and-related-confi.patch create mode 100644 target/linux/layerscape/patches-4.4/2123-armv8-aarch32-defconfig-Enable-KVM-related-configura.patch create mode 100644 target/linux/layerscape/patches-4.4/2124-armv8-aarch32-defconfig-Enable-FTM-alarm-support.patch create mode 100644 target/linux/layerscape/patches-4.4/3071-arm64-dts-add-device-tree-for-ls1012a-SoC-and-boards.patch create mode 100644 target/linux/layerscape/patches-4.4/3117-armv8-aarch32-Run-32-bit-Linux-for-LayerScape-SoCs.patch create mode 100644 target/linux/layerscape/patches-4.4/3118-armv8-aarch32-Add-KVM-support-for-AArch32-on-ARMv8.patch create mode 100644 target/linux/layerscape/patches-4.4/7072-LS1012-Add-PPFE-driver-in-Linux.patch create mode 100644 target/linux/layerscape/patches-4.4/8073-ls1012a-added-clock-configuration.patch create mode 100644 target/linux/layerscape/patches-4.4/8114-drivers-PCIE-enable-for-Linux.patch create mode 100644 target/linux/layerscape/patches-4.4/8115-PCI-layerscape-call-dw_pcie_setup_rc-in-host-initial.patch (limited to 'target/linux') diff --git a/target/linux/layerscape/64b/profiles/00-default.mk b/target/linux/layerscape/64b/profiles/00-default.mk index a2368afc0c..68b18bac95 100644 --- a/target/linux/layerscape/64b/profiles/00-default.mk +++ b/target/linux/layerscape/64b/profiles/00-default.mk @@ -9,6 +9,8 @@ endef DEFAULT_PACKAGES+= \ rcw-layerscape-ls1043ardb uboot-layerscape-$(SUBTARGET)-ls1043ardb \ - fman-layerscape-ls1043ardb + fman-layerscape-ls1043ardb \ + rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb \ + kmod-ppfe ppfe-ls1012ardb $(eval $(call Profile,Default)) diff --git a/target/linux/layerscape/base-files/etc/rc.local b/target/linux/layerscape/base-files/etc/rc.local new file mode 100644 index 0000000000..297c3a83db --- /dev/null +++ b/target/linux/layerscape/base-files/etc/rc.local @@ -0,0 +1,4 @@ +# Put your custom commands here that should be executed once +# the system init finished. By default this file does nothing. +modprobe pfe.ko +exit 0 diff --git a/target/linux/layerscape/config-4.4 b/target/linux/layerscape/config-4.4 index daf201326f..88da774872 100644 --- a/target/linux/layerscape/config-4.4 +++ b/target/linux/layerscape/config-4.4 @@ -294,3 +294,5 @@ CONFIG_USB=y CONFIG_VITESSE_PHY=y CONFIG_XPS=y CONFIG_ZLIB_INFLATE=y +CONFIG_MTD_SPI_NOR=y +CONFIG_SPI_FSL_QUADSPI=y diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile index 9153f00d05..7d80398d76 100644 --- a/target/linux/layerscape/image/Makefile +++ b/target/linux/layerscape/image/Makefile @@ -25,6 +25,11 @@ define Build/append-ls-dtb dd if=$(DTS_DIR)/$(1).dtb >> $@ endef +define Build/append-ls-rootfs-ext4 + $(STAGING_DIR_HOST)/bin/make_ext4fs -l $(word 2,$(1)) -b 4096 -i 6000 -m 0 -J $(KDIR)/$(word 1,$(1))-$(word 2,$(1)).root.ext4 $(TARGET_DIR) + dd if=$(KDIR)/$(word 1,$(1))-$(word 2,$(1)).root.ext4 >> $@ +endef + define Device/Default PROFILES = Default FILESYSTEMS := squashfs @@ -57,4 +62,23 @@ endif endef TARGET_DEVICES += ls1043ardb +define Device/ls1012ardb + DEVICE_TITLE := ls1012ardb-$(SUBTARGET) + DEVICE_PACKAGES += rcw-layerscape-ls1012ardb uboot-layerscape-$(SUBTARGET)-ls1012ardb kmod-ppfe ppfe-ls1012ardb +ifeq ($(SUBTARGET),64b) + DEVICE_DTS = freescale/fsl-ls1012a-rdb +endif +ifeq ($(SUBTARGET),32b) + DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls1012a-rdb +endif + IMAGE/firmware.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \ + append-ls-dtb $$(DEVICE_DTS) | pad-to 4M | append-kernel | pad-to 9M | \ + append-rootfs | pad-to 32M | check-size 33554433 + IMAGES += firmware.ext4.bin + IMAGE/firmware.ext4.bin = append-ls-rcw $(1) | pad-to 1M | append-ls-uboot $(1) | pad-to 3M | \ + append-ls-dtb $$(DEVICE_DTS) | pad-to 4M | append-kernel | pad-to 9M | \ + append-ls-rootfs-ext4 $(1) 23M | check-size 33554433 +endef +TARGET_DEVICES += ls1012ardb + $(eval $(call BuildImage)) diff --git a/target/linux/layerscape/modules.mk b/target/linux/layerscape/modules.mk new file mode 100644 index 0000000000..0b34f96b33 --- /dev/null +++ b/target/linux/layerscape/modules.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) Jiang Yutang +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define KernelPackage/ppfe + SUBMENU:=$(NETWORK_DEVICES_MENU) + TITLE:=Freescale PPFE Driver support + KCONFIG:=CONFIG_FSL_PPFE + FILES:=$(LINUX_DIR)/drivers/staging/fsl_ppfe/pfe.ko + AUTOLOAD:=$(call AutoLoad,35,ppfe) +endef + +define KernelPackage/ppfe/description + Kernel modules for Freescale PPFE Driver support. +endef + +$(eval $(call KernelPackage,ppfe)) diff --git a/target/linux/layerscape/patches-4.4/1074-mtd-nand-spi-nor-assign-MTD-of_node.patch b/target/linux/layerscape/patches-4.4/1074-mtd-nand-spi-nor-assign-MTD-of_node.patch new file mode 100644 index 0000000000..4130e84fe9 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1074-mtd-nand-spi-nor-assign-MTD-of_node.patch @@ -0,0 +1,31 @@ +From f560fdb9d71aaf3adc54341a1650577c78495df9 Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Fri, 30 Oct 2015 20:33:22 -0700 +Subject: [PATCH 074/113] mtd: {nand,spi-nor}: assign MTD of_node + +We should pass along our flash DT node to the MTD layer, so it can set +up ofpart for us. + +cherry-pick{ +remove the code: +drivers/mtd/nand/nand_base.c | 3 + +commit:3e63b26bdd4069c3df2cd7ce7217a21d06801b41 +} + +Signed-off-by: Brian Norris +Reviewed-by: Boris Brezillon +Signed-off-by: Yuan Yao +--- + drivers/mtd/spi-nor/spi-nor.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1217,6 +1217,7 @@ int spi_nor_scan(struct spi_nor *nor, co + mtd->flags |= MTD_NO_ERASE; + + mtd->dev.parent = dev; ++ mtd_set_of_node(mtd, np); + nor->page_size = info->page_size; + mtd->writebufsize = nor->page_size; + diff --git a/target/linux/layerscape/patches-4.4/1075-mtd-spi-nor-convert-to-spi_nor_-get-set-_flash_node.patch b/target/linux/layerscape/patches-4.4/1075-mtd-spi-nor-convert-to-spi_nor_-get-set-_flash_node.patch new file mode 100644 index 0000000000..182efacb7c --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1075-mtd-spi-nor-convert-to-spi_nor_-get-set-_flash_node.patch @@ -0,0 +1,80 @@ +From f906ec330da9aa83de5382653436be36273c63d3 Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Fri, 30 Oct 2015 20:33:24 -0700 +Subject: [PATCH 075/113] mtd: spi-nor: convert to spi_nor_{get, + set}_flash_node() + +Used semantic patch with 'make coccicheck MODE=patch COCCI=script.cocci': + +---8<---- +virtual patch + +@@ +struct spi_nor b; +struct spi_nor *c; +expression d; +@@ +( +-(b).flash_node = (d) ++spi_nor_set_flash_node(&b, d) +| +-(c)->flash_node = (d) ++spi_nor_set_flash_node(c, d) +) +---8<---- + +And a manual conversion for the one use of spi_nor_get_flash_node(). + +Signed-off-by: Brian Norris +Reviewed-by: Boris Brezillon +--- + drivers/mtd/devices/m25p80.c | 2 +- + drivers/mtd/spi-nor/fsl-quadspi.c | 2 +- + drivers/mtd/spi-nor/nxp-spifi.c | 2 +- + drivers/mtd/spi-nor/spi-nor.c | 2 +- + 4 files changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -221,7 +221,7 @@ static int m25p_probe(struct spi_device + nor->read_reg = m25p80_read_reg; + + nor->dev = &spi->dev; +- nor->flash_node = spi->dev.of_node; ++ spi_nor_set_flash_node(nor, spi->dev.of_node); + nor->priv = flash; + + spi_set_drvdata(spi, flash); +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -1013,7 +1013,7 @@ static int fsl_qspi_probe(struct platfor + mtd = &nor->mtd; + + nor->dev = dev; +- nor->flash_node = np; ++ spi_nor_set_flash_node(nor, np); + nor->priv = q; + + /* fill the hooks */ +--- a/drivers/mtd/spi-nor/nxp-spifi.c ++++ b/drivers/mtd/spi-nor/nxp-spifi.c +@@ -330,7 +330,7 @@ static int nxp_spifi_setup_flash(struct + writel(ctrl, spifi->io_base + SPIFI_CTRL); + + spifi->nor.dev = spifi->dev; +- spifi->nor.flash_node = np; ++ spi_nor_set_flash_node(&spifi->nor, np); + spifi->nor.priv = spifi; + spifi->nor.read = nxp_spifi_read; + spifi->nor.write = nxp_spifi_write; +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1111,7 +1111,7 @@ int spi_nor_scan(struct spi_nor *nor, co + const struct flash_info *info = NULL; + struct device *dev = nor->dev; + struct mtd_info *mtd = &nor->mtd; +- struct device_node *np = nor->flash_node; ++ struct device_node *np = spi_nor_get_flash_node(nor); + int ret; + int i; + diff --git a/target/linux/layerscape/patches-4.4/1076-mtd-spi-nor-drop-unnecessary-partition-parser-data.patch b/target/linux/layerscape/patches-4.4/1076-mtd-spi-nor-drop-unnecessary-partition-parser-data.patch new file mode 100644 index 0000000000..0960f53318 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1076-mtd-spi-nor-drop-unnecessary-partition-parser-data.patch @@ -0,0 +1,83 @@ +From e36da6d0a0841ea3a75d5189057bd020d737e71a Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Fri, 30 Oct 2015 20:33:26 -0700 +Subject: [PATCH 076/113] mtd: spi-nor: drop unnecessary partition parser data + +Now that the SPI-NOR/MTD framework pass the 'flash_node' through to the +partition parsing code, we don't have to do it ourselves. + +Also convert to mtd_device_register(), since we don't need the 2nd and +3rd parameters anymore. + +Signed-off-by: Brian Norris +Reviewed-by: Boris Brezillon +--- + drivers/mtd/devices/m25p80.c | 8 ++------ + drivers/mtd/spi-nor/fsl-quadspi.c | 4 +--- + drivers/mtd/spi-nor/nxp-spifi.c | 4 +--- + 3 files changed, 4 insertions(+), 12 deletions(-) + +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -197,7 +197,6 @@ static int m25p80_erase(struct spi_nor * + */ + static int m25p_probe(struct spi_device *spi) + { +- struct mtd_part_parser_data ppdata; + struct flash_platform_data *data; + struct m25p *flash; + struct spi_nor *nor; +@@ -249,11 +248,8 @@ static int m25p_probe(struct spi_device + if (ret) + return ret; + +- ppdata.of_node = spi->dev.of_node; +- +- return mtd_device_parse_register(&nor->mtd, NULL, &ppdata, +- data ? data->parts : NULL, +- data ? data->nr_parts : 0); ++ return mtd_device_register(&nor->mtd, data ? data->parts : NULL, ++ data ? data->nr_parts : 0); + } + + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -927,7 +927,6 @@ static void fsl_qspi_unprep(struct spi_n + static int fsl_qspi_probe(struct platform_device *pdev) + { + struct device_node *np = pdev->dev.of_node; +- struct mtd_part_parser_data ppdata; + struct device *dev = &pdev->dev; + struct fsl_qspi *q; + struct resource *res; +@@ -1038,8 +1037,7 @@ static int fsl_qspi_probe(struct platfor + if (ret) + goto mutex_failed; + +- ppdata.of_node = np; +- ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0); ++ ret = mtd_device_register(mtd, NULL, 0); + if (ret) + goto mutex_failed; + +--- a/drivers/mtd/spi-nor/nxp-spifi.c ++++ b/drivers/mtd/spi-nor/nxp-spifi.c +@@ -271,7 +271,6 @@ static void nxp_spifi_dummy_id_read(stru + static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, + struct device_node *np) + { +- struct mtd_part_parser_data ppdata; + enum read_mode flash_read; + u32 ctrl, property; + u16 mode = 0; +@@ -361,8 +360,7 @@ static int nxp_spifi_setup_flash(struct + return ret; + } + +- ppdata.of_node = np; +- ret = mtd_device_parse_register(&spifi->nor.mtd, NULL, &ppdata, NULL, 0); ++ ret = mtd_device_register(&spifi->nor.mtd, NULL, 0); + if (ret) { + dev_err(spifi->dev, "mtd device parse failed\n"); + return ret; diff --git a/target/linux/layerscape/patches-4.4/1077-mtd-add-get-set-of_node-flash_node-helpers.patch b/target/linux/layerscape/patches-4.4/1077-mtd-add-get-set-of_node-flash_node-helpers.patch new file mode 100644 index 0000000000..eeba1e90db --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1077-mtd-add-get-set-of_node-flash_node-helpers.patch @@ -0,0 +1,62 @@ +From a2f87e7df641b482e217f5b0efbaf41f6b8a0cf6 Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Fri, 30 Oct 2015 20:33:20 -0700 +Subject: [PATCH 077/113] mtd: add get/set of_node/flash_node helpers + +We are going to begin using the mtd->dev.of_node field for MTD device +nodes, so let's add helpers for it. Also, we'll be making some +conversions on spi_nor (and nand_chip eventually) too, so get that ready +with their own helpers. + +commit:28b8b26b308e656edfa9467867d5f79212da2ec3 +delete the include/linux/mtd/nand.h +just upgrade the code about spi. + +Signed-off-by: Brian Norris +Reviewed-by: Boris Brezillon +Signed-off-by: Yuan Yao +--- + include/linux/mtd/mtd.h | 11 +++++++++++ + include/linux/mtd/spi-nor.h | 11 +++++++++++ + 2 files changed, 22 insertions(+) + +--- a/include/linux/mtd/mtd.h ++++ b/include/linux/mtd/mtd.h +@@ -258,6 +258,17 @@ struct mtd_info { + int usecount; + }; + ++static inline void mtd_set_of_node(struct mtd_info *mtd, ++ struct device_node *np) ++{ ++ mtd->dev.of_node = np; ++} ++ ++static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd) ++{ ++ return mtd->dev.of_node; ++} ++ + int mtd_erase(struct mtd_info *mtd, struct erase_info *instr); + int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, + void **virt, resource_size_t *phys); +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -184,6 +184,17 @@ struct spi_nor { + void *priv; + }; + ++static inline void spi_nor_set_flash_node(struct spi_nor *nor, ++ struct device_node *np) ++{ ++ nor->flash_node = np; ++} ++ ++static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) ++{ ++ return nor->flash_node; ++} ++ + /** + * spi_nor_scan() - scan the SPI NOR + * @nor: the spi_nor structure diff --git a/target/linux/layerscape/patches-4.4/1078-mtd-spi-nor-drop-flash_node-field.patch b/target/linux/layerscape/patches-4.4/1078-mtd-spi-nor-drop-flash_node-field.patch new file mode 100644 index 0000000000..baaf9e5b08 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1078-mtd-spi-nor-drop-flash_node-field.patch @@ -0,0 +1,57 @@ +From df36b4601bc9f84684249a26eb39b818d6785fb8 Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Fri, 30 Oct 2015 20:33:27 -0700 +Subject: [PATCH 078/113] mtd: spi-nor: drop flash_node field + +We can just alias to the MTD of_node. + +Signed-off-by: Brian Norris +Reviewed-by: Boris Brezillon +--- + drivers/mtd/spi-nor/spi-nor.c | 1 - + include/linux/mtd/spi-nor.h | 6 ++---- + 2 files changed, 2 insertions(+), 5 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1217,7 +1217,6 @@ int spi_nor_scan(struct spi_nor *nor, co + mtd->flags |= MTD_NO_ERASE; + + mtd->dev.parent = dev; +- mtd_set_of_node(mtd, np); + nor->page_size = info->page_size; + mtd->writebufsize = nor->page_size; + +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -123,7 +123,6 @@ enum spi_nor_option_flags { + * @mtd: point to a mtd_info structure + * @lock: the lock for the read/write/erase/lock/unlock operations + * @dev: point to a spi device, or a spi nor controller device. +- * @flash_node: point to a device node describing this flash instance. + * @page_size: the page size of the SPI NOR + * @addr_width: number of address bytes + * @erase_opcode: the opcode for erasing a sector +@@ -154,7 +153,6 @@ struct spi_nor { + struct mtd_info mtd; + struct mutex lock; + struct device *dev; +- struct device_node *flash_node; + u32 page_size; + u8 addr_width; + u8 erase_opcode; +@@ -187,12 +185,12 @@ struct spi_nor { + static inline void spi_nor_set_flash_node(struct spi_nor *nor, + struct device_node *np) + { +- nor->flash_node = np; ++ mtd_set_of_node(&nor->mtd, np); + } + + static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor) + { +- return nor->flash_node; ++ return mtd_get_of_node(&nor->mtd); + } + + /** diff --git a/target/linux/layerscape/patches-4.4/1079-mtd-spi-nor-remove-unnecessary-leading-space-from-db.patch b/target/linux/layerscape/patches-4.4/1079-mtd-spi-nor-remove-unnecessary-leading-space-from-db.patch new file mode 100644 index 0000000000..159e7fddb0 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1079-mtd-spi-nor-remove-unnecessary-leading-space-from-db.patch @@ -0,0 +1,27 @@ +From 3ea419cf269832f5743d9b5ad75ece5178b02b09 Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Fri, 30 Oct 2015 12:56:22 -0700 +Subject: [PATCH 079/113] mtd: spi-nor: remove unnecessary leading space from + dbg print + +As Cyrille noted [1], this line is wrong. + +[1] http://lists.infradead.org/pipermail/linux-mtd/2015-September/061725.html + +Signed-off-by: Brian Norris +Cc: Cyrille Pitchen +--- + drivers/mtd/spi-nor/spi-nor.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -860,7 +860,7 @@ static const struct flash_info *spi_nor_ + + tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN); + if (tmp < 0) { +- dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp); ++ dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp); + return ERR_PTR(tmp); + } + diff --git a/target/linux/layerscape/patches-4.4/1080-mtd-fsl-quadspi-possible-NULL-dereference.patch b/target/linux/layerscape/patches-4.4/1080-mtd-fsl-quadspi-possible-NULL-dereference.patch new file mode 100644 index 0000000000..76898ab58d --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1080-mtd-fsl-quadspi-possible-NULL-dereference.patch @@ -0,0 +1,50 @@ +From bd02decd1ad7cc883ce388e769a34a3c402b90c4 Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Mon, 16 Nov 2015 10:45:30 -0800 +Subject: [PATCH 080/113] mtd: fsl-quadspi: possible NULL dereference + +It is theoretically possible to probe this driver without a matching +device tree, so let's guard against this. + +Also, use the of_device_get_match_data() helper to make this a bit +simpler. + +Coverity complained about this one. + +Signed-off-by: Brian Norris +Acked-by: Han xu +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -269,7 +269,7 @@ struct fsl_qspi { + struct clk *clk, *clk_en; + struct device *dev; + struct completion c; +- struct fsl_qspi_devtype_data *devtype_data; ++ const struct fsl_qspi_devtype_data *devtype_data; + u32 nor_size; + u32 nor_num; + u32 clk_rate; +@@ -933,8 +933,6 @@ static int fsl_qspi_probe(struct platfor + struct spi_nor *nor; + struct mtd_info *mtd; + int ret, i = 0; +- const struct of_device_id *of_id = +- of_match_device(fsl_qspi_dt_ids, &pdev->dev); + + q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL); + if (!q) +@@ -945,7 +943,9 @@ static int fsl_qspi_probe(struct platfor + return -ENODEV; + + q->dev = dev; +- q->devtype_data = (struct fsl_qspi_devtype_data *)of_id->data; ++ q->devtype_data = of_device_get_match_data(dev); ++ if (!q->devtype_data) ++ return -ENODEV; + platform_set_drvdata(pdev, q); + + /* find the resources */ diff --git a/target/linux/layerscape/patches-4.4/1081-mtd-spi-nor-provide-default-erase_sector-implementat.patch b/target/linux/layerscape/patches-4.4/1081-mtd-spi-nor-provide-default-erase_sector-implementat.patch new file mode 100644 index 0000000000..8becdd2905 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1081-mtd-spi-nor-provide-default-erase_sector-implementat.patch @@ -0,0 +1,105 @@ +From 56bd0e13d8bc3b4486251b10ac9d2ba7434c21ee Mon Sep 17 00:00:00 2001 +From: Brian Norris +Date: Tue, 10 Nov 2015 12:15:27 -0800 +Subject: [PATCH 081/113] mtd: spi-nor: provide default erase_sector + implementation + +Some spi-nor drivers perform sector erase by duplicating their +write_reg() command. Let's not require that the driver fill this out, +and provide a default instead. + +Tested on m25p80.c and Medatek's MT8173 SPI NOR flash driver. + +Signed-off-by: Brian Norris +--- + drivers/mtd/spi-nor/spi-nor.c | 37 +++++++++++++++++++++++++++++++++---- + include/linux/mtd/spi-nor.h | 3 ++- + 2 files changed, 35 insertions(+), 5 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -38,6 +38,7 @@ + #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES (40UL * HZ) + + #define SPI_NOR_MAX_ID_LEN 6 ++#define SPI_NOR_MAX_ADDR_WIDTH 4 + + struct flash_info { + char *name; +@@ -313,6 +314,29 @@ static void spi_nor_unlock_and_unprep(st + } + + /* ++ * Initiate the erasure of a single sector ++ */ ++static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) ++{ ++ u8 buf[SPI_NOR_MAX_ADDR_WIDTH]; ++ int i; ++ ++ if (nor->erase) ++ return nor->erase(nor, addr); ++ ++ /* ++ * Default implementation, if driver doesn't have a specialized HW ++ * control ++ */ ++ for (i = nor->addr_width - 1; i >= 0; i--) { ++ buf[i] = addr & 0xff; ++ addr >>= 8; ++ } ++ ++ return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width); ++} ++ ++/* + * Erase an address range on the nor chip. The address range may extend + * one or more erase sectors. Return an error is there is a problem erasing. + */ +@@ -371,10 +395,9 @@ static int spi_nor_erase(struct mtd_info + while (len) { + write_enable(nor); + +- if (nor->erase(nor, addr)) { +- ret = -EIO; ++ ret = spi_nor_erase_sector(nor, addr); ++ if (ret) + goto erase_err; +- } + + addr += mtd->erasesize; + len -= mtd->erasesize; +@@ -1098,7 +1121,7 @@ static int set_quad_mode(struct spi_nor + static int spi_nor_check(struct spi_nor *nor) + { + if (!nor->dev || !nor->read || !nor->write || +- !nor->read_reg || !nor->write_reg || !nor->erase) { ++ !nor->read_reg || !nor->write_reg) { + pr_err("spi-nor: please fill all the necessary fields!\n"); + return -EINVAL; + } +@@ -1299,6 +1322,12 @@ int spi_nor_scan(struct spi_nor *nor, co + nor->addr_width = 3; + } + ++ if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) { ++ dev_err(dev, "address width is too large: %u\n", ++ nor->addr_width); ++ return -EINVAL; ++ } ++ + nor->read_dummy = spi_nor_read_dummy_cycles(nor); + + dev_info(dev, "%s (%lld Kbytes)\n", info->name, +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -142,7 +142,8 @@ enum spi_nor_option_flags { + * @read: [DRIVER-SPECIFIC] read data from the SPI NOR + * @write: [DRIVER-SPECIFIC] write data to the SPI NOR + * @erase: [DRIVER-SPECIFIC] erase a sector of the SPI NOR +- * at the offset @offs ++ * at the offset @offs; if not provided by the driver, ++ * spi-nor will send the erase opcode via write_reg() + * @flash_lock: [FLASH-SPECIFIC] lock a region of the SPI NOR + * @flash_unlock: [FLASH-SPECIFIC] unlock a region of the SPI NOR + * @flash_is_locked: [FLASH-SPECIFIC] check if a region of the SPI NOR is diff --git a/target/linux/layerscape/patches-4.4/1083-mtd-spi-nor-Fix-error-message-with-unrecognized-JEDE.patch b/target/linux/layerscape/patches-4.4/1083-mtd-spi-nor-Fix-error-message-with-unrecognized-JEDE.patch new file mode 100644 index 0000000000..5b98ff4a4e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1083-mtd-spi-nor-Fix-error-message-with-unrecognized-JEDE.patch @@ -0,0 +1,31 @@ +From 30e609daed95664824e95344e85c7eaedd1bfcf3 Mon Sep 17 00:00:00 2001 +From: Ricardo Ribalda +Date: Mon, 30 Nov 2015 20:41:17 +0100 +Subject: [PATCH 083/113] mtd: spi-nor: Fix error message with unrecognized + JEDEC + +The error message was: + +m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 0, 0 + +The new error message: + +m25p80 spi32766.0: unrecognized JEDEC id bytes: 00, 00, 00 + +Signed-off-by: Ricardo Ribalda Delgado +Signed-off-by: Brian Norris +--- + drivers/mtd/spi-nor/spi-nor.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -894,7 +894,7 @@ static const struct flash_info *spi_nor_ + return &spi_nor_ids[tmp]; + } + } +- dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n", ++ dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n", + id[0], id[1], id[2]); + return ERR_PTR(-ENODEV); + } diff --git a/target/linux/layerscape/patches-4.4/1084-mtd-spi-nor-fix-error-handling-in-spi_nor_erase.patch b/target/linux/layerscape/patches-4.4/1084-mtd-spi-nor-fix-error-handling-in-spi_nor_erase.patch new file mode 100644 index 0000000000..3930028d97 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1084-mtd-spi-nor-fix-error-handling-in-spi_nor_erase.patch @@ -0,0 +1,39 @@ +From 9e473594776da97245049019f1d1e9608ff1214a Mon Sep 17 00:00:00 2001 +From: Heiner Kallweit +Date: Tue, 17 Nov 2015 20:18:54 +0100 +Subject: [PATCH 084/113] mtd: spi-nor: fix error handling in spi_nor_erase + +The documenting comment of mtd_erase in mtdcore.c states: +Device drivers are supposed to call instr->callback() whenever +the operation completes, even if it completes with a failure. + +Currently the callback isn't called in case of failure. Fix this. + +Signed-off-by: Heiner Kallweit +Signed-off-by: Brian Norris +--- + drivers/mtd/spi-nor/spi-nor.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -410,17 +410,13 @@ static int spi_nor_erase(struct mtd_info + + write_disable(nor); + ++erase_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); + +- instr->state = MTD_ERASE_DONE; ++ instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE; + mtd_erase_callback(instr); + + return ret; +- +-erase_err: +- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE); +- instr->state = MTD_ERASE_FAILED; +- return ret; + } + + static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs, diff --git a/target/linux/layerscape/patches-4.4/1085-mtd-spi-nor-Check-the-return-value-from-read_sr.patch b/target/linux/layerscape/patches-4.4/1085-mtd-spi-nor-Check-the-return-value-from-read_sr.patch new file mode 100644 index 0000000000..6f39b6bfc7 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1085-mtd-spi-nor-Check-the-return-value-from-read_sr.patch @@ -0,0 +1,58 @@ +From d05c68e35f42a46b352d2a4bdaef9954c946e20a Mon Sep 17 00:00:00 2001 +From: Fabio Estevam +Date: Fri, 20 Nov 2015 16:26:11 -0200 +Subject: [PATCH 085/113] mtd: spi-nor: Check the return value from read_sr() + +[context adjustment] + +We should better check the return value from read_sr() and +propagate it in the case of error. + +Signed-off-by: Fabio Estevam +Signed-off-by: Brian Norris +Integrated-by: Jiang Yutang +--- + drivers/mtd/spi-nor/spi-nor.c | 10 ++++++++-- + 1 file changed, 8 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -478,11 +478,13 @@ static int stm_is_locked_sr(struct spi_n + static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len) + { + struct mtd_info *mtd = &nor->mtd; +- u8 status_old, status_new; ++ int status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; + + status_old = read_sr(nor); ++ if (status_old < 0) ++ return status_old; + + /* SPI NOR always locks to the end */ + if (ofs + len != mtd->size) { +@@ -528,11 +530,13 @@ static int stm_lock(struct spi_nor *nor, + static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len) + { + struct mtd_info *mtd = &nor->mtd; +- uint8_t status_old, status_new; ++ int status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; + + status_old = read_sr(nor); ++ if (status_old < 0) ++ return status_old; + + /* Cannot unlock; would unlock larger region than requested */ + if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize, +@@ -1036,6 +1040,8 @@ static int macronix_quad_enable(struct s + int ret, val; + + val = read_sr(nor); ++ if (val < 0) ++ return val; + write_enable(nor); + + write_sr(nor, val | SR_QUAD_EN_MX); diff --git a/target/linux/layerscape/patches-4.4/1086-mtd-spi-nor-wait-until-lock-unlock-operations-are-re.patch b/target/linux/layerscape/patches-4.4/1086-mtd-spi-nor-wait-until-lock-unlock-operations-are-re.patch new file mode 100644 index 0000000000..7bcfd515da --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1086-mtd-spi-nor-wait-until-lock-unlock-operations-are-re.patch @@ -0,0 +1,66 @@ +From 3a06c61b48fbc23046928275e37a693e1055ae74 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Ezequiel=20Garc=C3=ADa?= +Date: Mon, 28 Dec 2015 17:54:51 -0300 +Subject: [PATCH 086/113] mtd: spi-nor: wait until lock/unlock operations are + ready + +On Micron and Numonyx devices, the status register write command +(WRSR), raises a work-in-progress bit (WIP) on the status register. +The datasheets for these devices specify that while the status +register write is in progress, the status register WIP bit can still +be read to check the end of the operation. + +This commit adds a wait_till_ready call on lock/unlock operations, +which is required for Micron and Numonyx but should be harmless for +others. This is needed to prevent applications from issuing erase or +program operations before the unlock operation is completed. + +Reported-by: Stas Sergeev +Signed-off-by: Ezequiel Garcia +Signed-off-by: Brian Norris +--- + drivers/mtd/spi-nor/spi-nor.c | 12 ++++++++++-- + 1 file changed, 10 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -481,6 +481,7 @@ static int stm_lock(struct spi_nor *nor, + int status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; ++ int ret; + + status_old = read_sr(nor); + if (status_old < 0) +@@ -519,7 +520,10 @@ static int stm_lock(struct spi_nor *nor, + return -EINVAL; + + write_enable(nor); +- return write_sr(nor, status_new); ++ ret = write_sr(nor, status_new); ++ if (ret) ++ return ret; ++ return spi_nor_wait_till_ready(nor); + } + + /* +@@ -533,6 +537,7 @@ static int stm_unlock(struct spi_nor *no + int status_old, status_new; + u8 mask = SR_BP2 | SR_BP1 | SR_BP0; + u8 shift = ffs(mask) - 1, pow, val; ++ int ret; + + status_old = read_sr(nor); + if (status_old < 0) +@@ -569,7 +574,10 @@ static int stm_unlock(struct spi_nor *no + return -EINVAL; + + write_enable(nor); +- return write_sr(nor, status_new); ++ ret = write_sr(nor, status_new); ++ if (ret) ++ return ret; ++ return spi_nor_wait_till_ready(nor); + } + + /* diff --git a/target/linux/layerscape/patches-4.4/1087-mtd-spi-nor-fsl-quadspi-add-big-endian-support.patch b/target/linux/layerscape/patches-4.4/1087-mtd-spi-nor-fsl-quadspi-add-big-endian-support.patch new file mode 100644 index 0000000000..9ceddd6cca --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1087-mtd-spi-nor-fsl-quadspi-add-big-endian-support.patch @@ -0,0 +1,400 @@ +From c58b398221d88ac0db29c3bb7522a4f48dfa102c Mon Sep 17 00:00:00 2001 +From: Yuan Yao +Date: Tue, 17 Nov 2015 16:13:47 +0800 +Subject: [PATCH 087/113] mtd: spi-nor: fsl-quadspi: add big-endian support + +Add R/W functions for big- or little-endian registers: +The qSPI controller's endian is independent of the CPU core's endian. +So far, the qSPI have two versions for big-endian and little-endian. + +Signed-off-by: Yuan Yao +Acked-by: Han xu +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 157 +++++++++++++++++++++++-------------- + 1 file changed, 97 insertions(+), 60 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -275,6 +275,7 @@ struct fsl_qspi { + u32 clk_rate; + unsigned int chip_base_addr; /* We may support two chips. */ + bool has_second_chip; ++ bool big_endian; + struct mutex lock; + struct pm_qos_request pm_qos_req; + }; +@@ -300,6 +301,28 @@ static inline int needs_wakeup_wait_mode + } + + /* ++ * R/W functions for big- or little-endian registers: ++ * The qSPI controller's endian is independent of the CPU core's endian. ++ * So far, although the CPU core is little-endian but the qSPI have two ++ * versions for big-endian and little-endian. ++ */ ++static void qspi_writel(struct fsl_qspi *q, u32 val, void __iomem *addr) ++{ ++ if (q->big_endian) ++ iowrite32be(val, addr); ++ else ++ iowrite32(val, addr); ++} ++ ++static u32 qspi_readl(struct fsl_qspi *q, void __iomem *addr) ++{ ++ if (q->big_endian) ++ return ioread32be(addr); ++ else ++ return ioread32(addr); ++} ++ ++/* + * An IC bug makes us to re-arrange the 32-bit data. + * The following chips, such as IMX6SLX, have fixed this bug. + */ +@@ -310,14 +333,14 @@ static inline u32 fsl_qspi_endian_xchg(s + + static inline void fsl_qspi_unlock_lut(struct fsl_qspi *q) + { +- writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); +- writel(QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); ++ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); ++ qspi_writel(q, QUADSPI_LCKER_UNLOCK, q->iobase + QUADSPI_LCKCR); + } + + static inline void fsl_qspi_lock_lut(struct fsl_qspi *q) + { +- writel(QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); +- writel(QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); ++ qspi_writel(q, QUADSPI_LUTKEY_VALUE, q->iobase + QUADSPI_LUTKEY); ++ qspi_writel(q, QUADSPI_LCKER_LOCK, q->iobase + QUADSPI_LCKCR); + } + + static irqreturn_t fsl_qspi_irq_handler(int irq, void *dev_id) +@@ -326,8 +349,8 @@ static irqreturn_t fsl_qspi_irq_handler( + u32 reg; + + /* clear interrupt */ +- reg = readl(q->iobase + QUADSPI_FR); +- writel(reg, q->iobase + QUADSPI_FR); ++ reg = qspi_readl(q, q->iobase + QUADSPI_FR); ++ qspi_writel(q, reg, q->iobase + QUADSPI_FR); + + if (reg & QUADSPI_FR_TFF_MASK) + complete(&q->c); +@@ -348,7 +371,7 @@ static void fsl_qspi_init_lut(struct fsl + + /* Clear all the LUT table */ + for (i = 0; i < QUADSPI_LUT_NUM; i++) +- writel(0, base + QUADSPI_LUT_BASE + i * 4); ++ qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4); + + /* Quad Read */ + lut_base = SEQID_QUAD_READ * 4; +@@ -364,14 +387,15 @@ static void fsl_qspi_init_lut(struct fsl + dummy = 8; + } + +- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), ++ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); +- writel(LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo), ++ qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + + /* Write enable */ + lut_base = SEQID_WREN * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_WREN), base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WREN), ++ base + QUADSPI_LUT(lut_base)); + + /* Page Program */ + lut_base = SEQID_PP * 4; +@@ -385,13 +409,15 @@ static void fsl_qspi_init_lut(struct fsl + addrlen = ADDR32BIT; + } + +- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), ++ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); +- writel(LUT0(FSL_WRITE, PAD1, 0), base + QUADSPI_LUT(lut_base + 1)); ++ qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0), ++ base + QUADSPI_LUT(lut_base + 1)); + + /* Read Status */ + lut_base = SEQID_RDSR * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_RDSR) | LUT1(FSL_READ, PAD1, 0x1), ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDSR) | ++ LUT1(FSL_READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + /* Erase a sector */ +@@ -400,40 +426,46 @@ static void fsl_qspi_init_lut(struct fsl + cmd = q->nor[0].erase_opcode; + addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT; + +- writel(LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), ++ qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + + /* Erase the whole chip */ + lut_base = SEQID_CHIP_ERASE * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE), ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_CHIP_ERASE), + base + QUADSPI_LUT(lut_base)); + + /* READ ID */ + lut_base = SEQID_RDID * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_RDID) | LUT1(FSL_READ, PAD1, 0x8), ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDID) | ++ LUT1(FSL_READ, PAD1, 0x8), + base + QUADSPI_LUT(lut_base)); + + /* Write Register */ + lut_base = SEQID_WRSR * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_WRSR) | LUT1(FSL_WRITE, PAD1, 0x2), ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRSR) | ++ LUT1(FSL_WRITE, PAD1, 0x2), + base + QUADSPI_LUT(lut_base)); + + /* Read Configuration Register */ + lut_base = SEQID_RDCR * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_RDCR) | LUT1(FSL_READ, PAD1, 0x1), ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RDCR) | ++ LUT1(FSL_READ, PAD1, 0x1), + base + QUADSPI_LUT(lut_base)); + + /* Write disable */ + lut_base = SEQID_WRDI * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_WRDI), base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WRDI), ++ base + QUADSPI_LUT(lut_base)); + + /* Enter 4 Byte Mode (Micron) */ + lut_base = SEQID_EN4B * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_EN4B), base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_EN4B), ++ base + QUADSPI_LUT(lut_base)); + + /* Enter 4 Byte Mode (Spansion) */ + lut_base = SEQID_BRWR * 4; +- writel(LUT0(CMD, PAD1, SPINOR_OP_BRWR), base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR), ++ base + QUADSPI_LUT(lut_base)); + + fsl_qspi_lock_lut(q); + } +@@ -488,15 +520,16 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c + q->chip_base_addr, addr, len, cmd); + + /* save the reg */ +- reg = readl(base + QUADSPI_MCR); ++ reg = qspi_readl(q, base + QUADSPI_MCR); + +- writel(q->memmap_phy + q->chip_base_addr + addr, base + QUADSPI_SFAR); +- writel(QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS, ++ qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr, ++ base + QUADSPI_SFAR); ++ qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS, + base + QUADSPI_RBCT); +- writel(reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR); ++ qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR); + + do { +- reg2 = readl(base + QUADSPI_SR); ++ reg2 = qspi_readl(q, base + QUADSPI_SR); + if (reg2 & (QUADSPI_SR_IP_ACC_MASK | QUADSPI_SR_AHB_ACC_MASK)) { + udelay(1); + dev_dbg(q->dev, "The controller is busy, 0x%x\n", reg2); +@@ -507,21 +540,22 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c + + /* trigger the LUT now */ + seqid = fsl_qspi_get_seqid(q, cmd); +- writel((seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, base + QUADSPI_IPCR); ++ qspi_writel(q, (seqid << QUADSPI_IPCR_SEQID_SHIFT) | len, ++ base + QUADSPI_IPCR); + + /* Wait for the interrupt. */ + if (!wait_for_completion_timeout(&q->c, msecs_to_jiffies(1000))) { + dev_err(q->dev, + "cmd 0x%.2x timeout, addr@%.8x, FR:0x%.8x, SR:0x%.8x\n", +- cmd, addr, readl(base + QUADSPI_FR), +- readl(base + QUADSPI_SR)); ++ cmd, addr, qspi_readl(q, base + QUADSPI_FR), ++ qspi_readl(q, base + QUADSPI_SR)); + err = -ETIMEDOUT; + } else { + err = 0; + } + + /* restore the MCR */ +- writel(reg, base + QUADSPI_MCR); ++ qspi_writel(q, reg, base + QUADSPI_MCR); + + return err; + } +@@ -533,7 +567,7 @@ static void fsl_qspi_read_data(struct fs + int i = 0; + + while (len > 0) { +- tmp = readl(q->iobase + QUADSPI_RBDR + i * 4); ++ tmp = qspi_readl(q, q->iobase + QUADSPI_RBDR + i * 4); + tmp = fsl_qspi_endian_xchg(q, tmp); + dev_dbg(q->dev, "chip addr:0x%.8x, rcv:0x%.8x\n", + q->chip_base_addr, tmp); +@@ -561,9 +595,9 @@ static inline void fsl_qspi_invalid(stru + { + u32 reg; + +- reg = readl(q->iobase + QUADSPI_MCR); ++ reg = qspi_readl(q, q->iobase + QUADSPI_MCR); + reg |= QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK; +- writel(reg, q->iobase + QUADSPI_MCR); ++ qspi_writel(q, reg, q->iobase + QUADSPI_MCR); + + /* + * The minimum delay : 1 AHB + 2 SFCK clocks. +@@ -572,7 +606,7 @@ static inline void fsl_qspi_invalid(stru + udelay(1); + + reg &= ~(QUADSPI_MCR_SWRSTHD_MASK | QUADSPI_MCR_SWRSTSD_MASK); +- writel(reg, q->iobase + QUADSPI_MCR); ++ qspi_writel(q, reg, q->iobase + QUADSPI_MCR); + } + + static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, +@@ -586,20 +620,20 @@ static int fsl_qspi_nor_write(struct fsl + q->chip_base_addr, to, count); + + /* clear the TX FIFO. */ +- tmp = readl(q->iobase + QUADSPI_MCR); +- writel(tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR); ++ tmp = qspi_readl(q, q->iobase + QUADSPI_MCR); ++ qspi_writel(q, tmp | QUADSPI_MCR_CLR_TXF_MASK, q->iobase + QUADSPI_MCR); + + /* fill the TX data to the FIFO */ + for (j = 0, i = ((count + 3) / 4); j < i; j++) { + tmp = fsl_qspi_endian_xchg(q, *txbuf); +- writel(tmp, q->iobase + QUADSPI_TBDR); ++ qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR); + txbuf++; + } + + /* fill the TXFIFO upto 16 bytes for i.MX7d */ + if (needs_fill_txfifo(q)) + for (; i < 4; i++) +- writel(tmp, q->iobase + QUADSPI_TBDR); ++ qspi_writel(q, tmp, q->iobase + QUADSPI_TBDR); + + /* Trigger it */ + ret = fsl_qspi_runcmd(q, opcode, to, count); +@@ -615,10 +649,10 @@ static void fsl_qspi_set_map_addr(struct + int nor_size = q->nor_size; + void __iomem *base = q->iobase; + +- writel(nor_size + q->memmap_phy, base + QUADSPI_SFA1AD); +- writel(nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD); +- writel(nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD); +- writel(nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD); ++ qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD); ++ qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD); ++ qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD); ++ qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD); + } + + /* +@@ -640,24 +674,26 @@ static void fsl_qspi_init_abh_read(struc + int seqid; + + /* AHB configuration for access buffer 0/1/2 .*/ +- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); +- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); +- writel(QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); ++ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); ++ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); ++ qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); + /* + * Set ADATSZ with the maximum AHB buffer size to improve the + * read performance. + */ +- writel(QUADSPI_BUF3CR_ALLMST_MASK | ((q->devtype_data->ahb_buf_size / 8) +- << QUADSPI_BUF3CR_ADATSZ_SHIFT), base + QUADSPI_BUF3CR); ++ qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | ++ ((q->devtype_data->ahb_buf_size / 8) ++ << QUADSPI_BUF3CR_ADATSZ_SHIFT), ++ base + QUADSPI_BUF3CR); + + /* We only use the buffer3 */ +- writel(0, base + QUADSPI_BUF0IND); +- writel(0, base + QUADSPI_BUF1IND); +- writel(0, base + QUADSPI_BUF2IND); ++ qspi_writel(q, 0, base + QUADSPI_BUF0IND); ++ qspi_writel(q, 0, base + QUADSPI_BUF1IND); ++ qspi_writel(q, 0, base + QUADSPI_BUF2IND); + + /* Set the default lut sequence for AHB Read. */ + seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode); +- writel(seqid << QUADSPI_BFGENCR_SEQID_SHIFT, ++ qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT, + q->iobase + QUADSPI_BFGENCR); + } + +@@ -713,7 +749,7 @@ static int fsl_qspi_nor_setup(struct fsl + return ret; + + /* Reset the module */ +- writel(QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK, ++ qspi_writel(q, QUADSPI_MCR_SWRSTSD_MASK | QUADSPI_MCR_SWRSTHD_MASK, + base + QUADSPI_MCR); + udelay(1); + +@@ -721,24 +757,24 @@ static int fsl_qspi_nor_setup(struct fsl + fsl_qspi_init_lut(q); + + /* Disable the module */ +- writel(QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK, ++ qspi_writel(q, QUADSPI_MCR_MDIS_MASK | QUADSPI_MCR_RESERVED_MASK, + base + QUADSPI_MCR); + +- reg = readl(base + QUADSPI_SMPR); +- writel(reg & ~(QUADSPI_SMPR_FSDLY_MASK ++ reg = qspi_readl(q, base + QUADSPI_SMPR); ++ qspi_writel(q, reg & ~(QUADSPI_SMPR_FSDLY_MASK + | QUADSPI_SMPR_FSPHS_MASK + | QUADSPI_SMPR_HSENA_MASK + | QUADSPI_SMPR_DDRSMP_MASK), base + QUADSPI_SMPR); + + /* Enable the module */ +- writel(QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, ++ qspi_writel(q, QUADSPI_MCR_RESERVED_MASK | QUADSPI_MCR_END_CFG_MASK, + base + QUADSPI_MCR); + + /* clear all interrupt status */ +- writel(0xffffffff, q->iobase + QUADSPI_FR); ++ qspi_writel(q, 0xffffffff, q->iobase + QUADSPI_FR); + + /* enable the interrupt */ +- writel(QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); ++ qspi_writel(q, QUADSPI_RSER_TFIE, q->iobase + QUADSPI_RSER); + + return 0; + } +@@ -954,6 +990,7 @@ static int fsl_qspi_probe(struct platfor + if (IS_ERR(q->iobase)) + return PTR_ERR(q->iobase); + ++ q->big_endian = of_property_read_bool(np, "big-endian"); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "QuadSPI-memory"); + if (!devm_request_mem_region(dev, res->start, resource_size(res), +@@ -1101,8 +1138,8 @@ static int fsl_qspi_remove(struct platfo + } + + /* disable the hardware */ +- writel(QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); +- writel(0x0, q->iobase + QUADSPI_RSER); ++ qspi_writel(q, QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); ++ qspi_writel(q, 0x0, q->iobase + QUADSPI_RSER); + + mutex_destroy(&q->lock); + diff --git a/target/linux/layerscape/patches-4.4/1088-mtd-spi-nor-fsl-quadspi-add-support-for-ls1021a.patch b/target/linux/layerscape/patches-4.4/1088-mtd-spi-nor-fsl-quadspi-add-support-for-ls1021a.patch new file mode 100644 index 0000000000..a5782ffc1a --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1088-mtd-spi-nor-fsl-quadspi-add-support-for-ls1021a.patch @@ -0,0 +1,63 @@ +From da44c1517526822e73642fc71b034de8fc7d2b43 Mon Sep 17 00:00:00 2001 +From: Yuan Yao +Date: Tue, 17 Nov 2015 16:44:45 +0800 +Subject: [PATCH 088/113] mtd: spi-nor: fsl-quadspi: add support for ls1021a + +[context adjustment] + +LS1021a also support Freescale Quad SPI controller. +Add fsl-quadspi support for ls1021a chip and make SPI_FSL_QUADSPI +selectable for LS1021A SOC hardwares. + +Signed-off-by: Yuan Yao +Acked-by: Han xu +Integrated-by: Jiang Yutang +--- + drivers/mtd/spi-nor/Kconfig | 2 +- + drivers/mtd/spi-nor/fsl-quadspi.c | 10 ++++++++++ + 2 files changed, 11 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/Kconfig ++++ b/drivers/mtd/spi-nor/Kconfig +@@ -23,7 +23,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS + + config SPI_FSL_QUADSPI + tristate "Freescale Quad SPI controller" +- depends on ARCH_MXC || COMPILE_TEST ++ depends on ARCH_MXC || SOC_LS1021A || COMPILE_TEST + depends on HAS_IOMEM + help + This enables support for the Quad SPI controller in master mode. +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -213,6 +213,7 @@ enum fsl_qspi_devtype { + FSL_QUADSPI_IMX6SX, + FSL_QUADSPI_IMX7D, + FSL_QUADSPI_IMX6UL, ++ FSL_QUADSPI_LS1021A, + }; + + struct fsl_qspi_devtype_data { +@@ -258,6 +259,14 @@ static struct fsl_qspi_devtype_data imx6 + | QUADSPI_QUIRK_4X_INT_CLK, + }; + ++static struct fsl_qspi_devtype_data ls1021a_data = { ++ .devtype = FSL_QUADSPI_LS1021A, ++ .rxfifo = 128, ++ .txfifo = 64, ++ .ahb_buf_size = 1024, ++ .driver_data = 0, ++}; ++ + #define FSL_QSPI_MAX_CHIP 4 + struct fsl_qspi { + struct spi_nor nor[FSL_QSPI_MAX_CHIP]; +@@ -812,6 +821,7 @@ static const struct of_device_id fsl_qsp + { .compatible = "fsl,imx6sx-qspi", .data = (void *)&imx6sx_data, }, + { .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, }, + { .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, }, ++ { .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, }, + { /* sentinel */ } + }; + MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); diff --git a/target/linux/layerscape/patches-4.4/1089-mtd-spi-nor-fsl-quadspi-add-support-for-layerscape.patch b/target/linux/layerscape/patches-4.4/1089-mtd-spi-nor-fsl-quadspi-add-support-for-layerscape.patch new file mode 100644 index 0000000000..bd959df11d --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1089-mtd-spi-nor-fsl-quadspi-add-support-for-layerscape.patch @@ -0,0 +1,28 @@ +From 9c6153130081ef2c109e2a243a598f2bc0dc6413 Mon Sep 17 00:00:00 2001 +From: Yuan Yao +Date: Tue, 17 Nov 2015 17:06:47 +0800 +Subject: [PATCH 089/113] mtd: spi-nor: fsl-quadspi: add support for + layerscape + +[context adjustment] + +LS1043a and LS2080A in the Layerscape family also support Freescale Quad +SPI, make Quad SPI selectable for these hardwares. + +Signed-off-by: Yuan Yao +Integrated-by: Jiang Yutang +--- + drivers/mtd/spi-nor/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/Kconfig ++++ b/drivers/mtd/spi-nor/Kconfig +@@ -23,7 +23,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS + + config SPI_FSL_QUADSPI + tristate "Freescale Quad SPI controller" +- depends on ARCH_MXC || SOC_LS1021A || COMPILE_TEST ++ depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST + depends on HAS_IOMEM + help + This enables support for the Quad SPI controller in master mode. diff --git a/target/linux/layerscape/patches-4.4/1090-mtd-spi-nor-Add-SPI-NOR-layer-PM-support.patch b/target/linux/layerscape/patches-4.4/1090-mtd-spi-nor-Add-SPI-NOR-layer-PM-support.patch new file mode 100644 index 0000000000..e959ca50d3 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1090-mtd-spi-nor-Add-SPI-NOR-layer-PM-support.patch @@ -0,0 +1,137 @@ +From 2c5a3db21926e9ebfd7a32e3c36a3256ed84903c Mon Sep 17 00:00:00 2001 +From: Hou Zhiqiang +Date: Thu, 19 Nov 2015 20:25:24 +0800 +Subject: [PATCH 090/113] mtd: spi-nor: Add SPI NOR layer PM support + +[context adjustment] + +Add the Power Management API in SPI NOR framework. +The Power Management system will turn off power supply to SPI flash +when system suspending, and then the SPI flash will be in the reset +state after system resuming. As a result, the status&configurations +of SPI flash driver will mismatch with its current hardware state. +So reinitialize SPI flash to make sure it is resumed to the correct +state. +And the SPI NOR layer just do common configuration depending on the +records in structure spi_nor. + +Signed-off-by: Hou Zhiqiang +Integrated-by: Jiang Yutang +--- + drivers/mtd/spi-nor/spi-nor.c | 74 ++++++++++++++++++++++++++++++++++------- + include/linux/mtd/spi-nor.h | 9 +++++ + 2 files changed, 71 insertions(+), 12 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1139,6 +1139,26 @@ static int spi_nor_check(struct spi_nor + return 0; + } + ++/* ++ * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up ++ * with the software protection bits set ++ */ ++static int spi_nor_unprotect_on_powerup(struct spi_nor *nor) ++{ ++ const struct flash_info *info = NULL; ++ int ret = 0; ++ ++ info = spi_nor_read_id(nor); ++ if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || ++ JEDEC_MFR(info) == SNOR_MFR_INTEL || ++ JEDEC_MFR(info) == SNOR_MFR_SST) { ++ write_enable(nor); ++ ret = write_sr(nor, 0); ++ } ++ ++ return ret; ++} ++ + int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) + { + const struct flash_info *info = NULL; +@@ -1186,18 +1206,9 @@ int spi_nor_scan(struct spi_nor *nor, co + + mutex_init(&nor->lock); + +- /* +- * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up +- * with the software protection bits set +- */ +- +- if (JEDEC_MFR(info) == SNOR_MFR_ATMEL || +- JEDEC_MFR(info) == SNOR_MFR_INTEL || +- JEDEC_MFR(info) == SNOR_MFR_MACRONIX || +- JEDEC_MFR(info) == SNOR_MFR_SST) { +- write_enable(nor); +- write_sr(nor, 0); +- } ++ ret = spi_nor_unprotect_on_powerup(nor); ++ if (ret) ++ return ret; + + if (!mtd->name) + mtd->name = dev_name(dev); +@@ -1363,6 +1374,45 @@ int spi_nor_scan(struct spi_nor *nor, co + } + EXPORT_SYMBOL_GPL(spi_nor_scan); + ++static int spi_nor_hw_reinit(struct spi_nor *nor) ++{ ++ const struct flash_info *info = NULL; ++ struct device *dev = nor->dev; ++ int ret; ++ ++ info = spi_nor_read_id(nor); ++ ++ ret = spi_nor_unprotect_on_powerup(nor); ++ if (ret) ++ return ret; ++ ++ if (nor->flash_read == SPI_NOR_QUAD) { ++ ret = set_quad_mode(nor, info); ++ if (ret) { ++ dev_err(dev, "quad mode not supported\n"); ++ return ret; ++ } ++ } ++ ++ if (nor->addr_width == 4 && ++ JEDEC_MFR(info) != SNOR_MFR_SPANSION) ++ set_4byte(nor, info, 1); ++ ++ return 0; ++} ++ ++int spi_nor_suspend(struct spi_nor *nor) ++{ ++ return 0; ++} ++EXPORT_SYMBOL_GPL(spi_nor_suspend); ++ ++int spi_nor_resume(struct spi_nor *nor) ++{ ++ return spi_nor_hw_reinit(nor); ++} ++EXPORT_SYMBOL_GPL(spi_nor_resume); ++ + static const struct flash_info *spi_nor_match_id(const char *name) + { + const struct flash_info *id = spi_nor_ids; +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -210,4 +210,13 @@ static inline struct device_node *spi_no + */ + int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode); + ++/** ++ * spi_nor_suspend/resume() - the SPI NOR layer PM API ++ * @nor: the spi_nor structure ++ * ++ * Return: 0 for success, others for failure. ++ */ ++int spi_nor_suspend(struct spi_nor *nor); ++int spi_nor_resume(struct spi_nor *nor); ++ + #endif diff --git a/target/linux/layerscape/patches-4.4/1091-mtd-spi-nor-change-return-value-of-read-write.patch b/target/linux/layerscape/patches-4.4/1091-mtd-spi-nor-change-return-value-of-read-write.patch new file mode 100644 index 0000000000..faa806e701 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1091-mtd-spi-nor-change-return-value-of-read-write.patch @@ -0,0 +1,82 @@ +From 0a8079b232e9188ba267e37e20f192bed6c2b29b Mon Sep 17 00:00:00 2001 +From: Michal Suchanek +Date: Wed, 2 Dec 2015 10:38:19 +0000 +Subject: [PATCH 091/113] mtd: spi-nor: change return value of read/write + +Change the return value of spi-nor device read and write methods to +allow returning amount of data transferred and errors as +read(2)/write(2) does. + +Signed-off-by: Michal Suchanek +Signed-off-by: Hou Zhiqiang +--- + drivers/mtd/devices/m25p80.c | 5 +++-- + drivers/mtd/spi-nor/fsl-quadspi.c | 5 +++-- + include/linux/mtd/spi-nor.h | 4 ++-- + 3 files changed, 8 insertions(+), 6 deletions(-) + +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -73,7 +73,7 @@ static int m25p80_write_reg(struct spi_n + return spi_write(spi, flash->command, len + 1); + } + +-static void m25p80_write(struct spi_nor *nor, loff_t to, size_t len, ++static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { + struct m25p *flash = nor->priv; +@@ -101,6 +101,7 @@ static void m25p80_write(struct spi_nor + spi_sync(spi, &m); + + *retlen += m.actual_length - cmd_sz; ++ return 0; + } + + static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) +@@ -119,7 +120,7 @@ static inline unsigned int m25p80_rx_nbi + * Read an address range from the nor chip. The address range + * may be any size provided it is within the physical boundaries. + */ +-static int m25p80_read(struct spi_nor *nor, loff_t from, size_t len, ++static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, + size_t *retlen, u_char *buf) + { + struct m25p *flash = nor->priv; +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -868,7 +868,7 @@ static int fsl_qspi_write_reg(struct spi + return ret; + } + +-static void fsl_qspi_write(struct spi_nor *nor, loff_t to, ++static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to, + size_t len, size_t *retlen, const u_char *buf) + { + struct fsl_qspi *q = nor->priv; +@@ -878,9 +878,10 @@ static void fsl_qspi_write(struct spi_no + + /* invalid the data in the AHB buffer. */ + fsl_qspi_invalid(q); ++ return 0; + } + +-static int fsl_qspi_read(struct spi_nor *nor, loff_t from, ++static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from, + size_t len, size_t *retlen, u_char *buf) + { + struct fsl_qspi *q = nor->priv; +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -170,9 +170,9 @@ struct spi_nor { + int (*read_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + +- int (*read)(struct spi_nor *nor, loff_t from, ++ ssize_t (*read)(struct spi_nor *nor, loff_t from, + size_t len, size_t *retlen, u_char *read_buf); +- void (*write)(struct spi_nor *nor, loff_t to, ++ ssize_t (*write)(struct spi_nor *nor, loff_t to, + size_t len, size_t *retlen, const u_char *write_buf); + int (*erase)(struct spi_nor *nor, loff_t offs); + diff --git a/target/linux/layerscape/patches-4.4/1092-mtd-fsl-quadspi-return-amount-of-data-read-written-o.patch b/target/linux/layerscape/patches-4.4/1092-mtd-fsl-quadspi-return-amount-of-data-read-written-o.patch new file mode 100644 index 0000000000..443803693c --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1092-mtd-fsl-quadspi-return-amount-of-data-read-written-o.patch @@ -0,0 +1,73 @@ +From 99768b3062501b05810fb62545279da3a4371ca0 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek +Date: Wed, 2 Dec 2015 10:38:19 +0000 +Subject: [PATCH 092/113] mtd: fsl-quadspi: return amount of data read/written + or error + +Return amount of data read/written or error as read(2)/write(2) does. + +Signed-off-by: Michal Suchanek +Signed-off-by: Hou Zhiqiang +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 18 +++++++++++------- + 1 file changed, 11 insertions(+), 7 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -618,7 +618,7 @@ static inline void fsl_qspi_invalid(stru + qspi_writel(q, reg, q->iobase + QUADSPI_MCR); + } + +-static int fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, ++static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, + u8 opcode, unsigned int to, u32 *txbuf, + unsigned count, size_t *retlen) + { +@@ -647,8 +647,11 @@ static int fsl_qspi_nor_write(struct fsl + /* Trigger it */ + ret = fsl_qspi_runcmd(q, opcode, to, count); + +- if (ret == 0 && retlen) +- *retlen += count; ++ if (ret == 0) { ++ if (retlen) ++ *retlen += count; ++ return count; ++ } + + return ret; + } +@@ -860,6 +863,8 @@ static int fsl_qspi_write_reg(struct spi + } else if (len > 0) { + ret = fsl_qspi_nor_write(q, nor, opcode, 0, + (u32 *)buf, len, NULL); ++ if (ret > 0) ++ return 0; + } else { + dev_err(q->dev, "invalid cmd %d\n", opcode); + ret = -EINVAL; +@@ -873,12 +878,12 @@ static ssize_t fsl_qspi_write(struct spi + { + struct fsl_qspi *q = nor->priv; + +- fsl_qspi_nor_write(q, nor, nor->program_opcode, to, ++ ssize_t ret = fsl_qspi_nor_write(q, nor, nor->program_opcode, to, + (u32 *)buf, len, retlen); + + /* invalid the data in the AHB buffer. */ + fsl_qspi_invalid(q); +- return 0; ++ return ret; + } + + static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from, +@@ -924,8 +929,7 @@ static ssize_t fsl_qspi_read(struct spi_ + memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, + len); + +- *retlen += len; +- return 0; ++ return len; + } + + static int fsl_qspi_erase(struct spi_nor *nor, loff_t offs) diff --git a/target/linux/layerscape/patches-4.4/1093-mtd-spi-nor-check-return-value-from-read-write.patch b/target/linux/layerscape/patches-4.4/1093-mtd-spi-nor-check-return-value-from-read-write.patch new file mode 100644 index 0000000000..0721a067af --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1093-mtd-spi-nor-check-return-value-from-read-write.patch @@ -0,0 +1,127 @@ +From 8527843351169d999995d331bbdad75560ccafb2 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek +Date: Wed, 2 Dec 2015 10:38:20 +0000 +Subject: [PATCH 093/113] mtd: spi-nor: check return value from read/write + +SPI NOR hardware drivers now return useful value from their read/write +functions so check them. + +Signed-off-by: Michal Suchanek +Signed-off-by: Hou Zhiqiang +--- + drivers/mtd/spi-nor/spi-nor.c | 50 +++++++++++++++++++++++++++++------------ + 1 file changed, 36 insertions(+), 14 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -922,7 +922,10 @@ static int spi_nor_read(struct mtd_info + ret = nor->read(nor, from, len, retlen, buf); + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ); +- return ret; ++ if (ret < 0) ++ return ret; ++ ++ return 0; + } + + static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, +@@ -948,10 +951,14 @@ static int sst_write(struct mtd_info *mt + nor->program_opcode = SPINOR_OP_BP; + + /* write one byte. */ +- nor->write(nor, to, 1, retlen, buf); ++ ret = nor->write(nor, to, 1, retlen, buf); ++ if (ret < 0) ++ goto sst_write_err; ++ WARN(ret != 1, "While writing 1 byte written %i bytes\n", ++ (int)ret); + ret = spi_nor_wait_till_ready(nor); + if (ret) +- goto time_out; ++ goto sst_write_err; + } + to += actual; + +@@ -960,10 +967,14 @@ static int sst_write(struct mtd_info *mt + nor->program_opcode = SPINOR_OP_AAI_WP; + + /* write two bytes. */ +- nor->write(nor, to, 2, retlen, buf + actual); ++ ret = nor->write(nor, to, 2, retlen, buf + actual); ++ if (ret < 0) ++ goto sst_write_err; ++ WARN(ret != 2, "While writing 2 bytes written %i bytes\n", ++ (int)ret); + ret = spi_nor_wait_till_ready(nor); + if (ret) +- goto time_out; ++ goto sst_write_err; + to += 2; + nor->sst_write_second = true; + } +@@ -972,21 +983,24 @@ static int sst_write(struct mtd_info *mt + write_disable(nor); + ret = spi_nor_wait_till_ready(nor); + if (ret) +- goto time_out; ++ goto sst_write_err; + + /* Write out trailing byte if it exists. */ + if (actual != len) { + write_enable(nor); + + nor->program_opcode = SPINOR_OP_BP; +- nor->write(nor, to, 1, retlen, buf + actual); +- ++ ret = nor->write(nor, to, 1, retlen, buf + actual); ++ if (ret < 0) ++ goto sst_write_err; ++ WARN(ret != 1, "While writing 1 byte written %i bytes\n", ++ (int)ret); + ret = spi_nor_wait_till_ready(nor); + if (ret) +- goto time_out; ++ goto sst_write_err; + write_disable(nor); + } +-time_out: ++sst_write_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); + return ret; + } +@@ -1015,14 +1029,18 @@ static int spi_nor_write(struct mtd_info + + /* do all the bytes fit onto one page? */ + if (page_offset + len <= nor->page_size) { +- nor->write(nor, to, len, retlen, buf); ++ ret = nor->write(nor, to, len, retlen, buf); ++ if (ret < 0) ++ goto write_err; + } else { + /* the size of data remaining on the first page */ + page_size = nor->page_size - page_offset; +- nor->write(nor, to, page_size, retlen, buf); ++ ret = nor->write(nor, to, page_size, retlen, buf); ++ if (ret < 0) ++ goto write_err; + + /* write everything in nor->page_size chunks */ +- for (i = page_size; i < len; i += page_size) { ++ for (i = ret; i < len; ) { + page_size = len - i; + if (page_size > nor->page_size) + page_size = nor->page_size; +@@ -1033,7 +1051,11 @@ static int spi_nor_write(struct mtd_info + + write_enable(nor); + +- nor->write(nor, to + i, page_size, retlen, buf + i); ++ ret = nor->write(nor, to + i, page_size, retlen, ++ buf + i); ++ if (ret < 0) ++ goto write_err; ++ i += ret; + } + } + diff --git a/target/linux/layerscape/patches-4.4/1094-mtd-spi-nor-stop-passing-around-retlen.patch b/target/linux/layerscape/patches-4.4/1094-mtd-spi-nor-stop-passing-around-retlen.patch new file mode 100644 index 0000000000..6223dfc190 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1094-mtd-spi-nor-stop-passing-around-retlen.patch @@ -0,0 +1,215 @@ +From a99477d72b500b48cb3614aad0ce096fe4e3f437 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek +Date: Wed, 2 Dec 2015 10:38:20 +0000 +Subject: [PATCH 094/113] mtd: spi-nor: stop passing around retlen + +[context adjustment] +not apply changes of drivers/mtd/devices/m25p80.c +################# +@@ -74,7 +74,7 @@ static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len) + } + + static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, +- size_t *retlen, const u_char *buf) ++ const u_char *buf) + { + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; +@@ -106,7 +106,6 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, + ret = m.actual_length - cmd_sz; + if (ret < 0) + return -EIO; +- *retlen += ret; + return ret; + } + +@@ -127,7 +126,7 @@ static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) + * may be any size provided it is within the physical boundaries. + */ + static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, +- size_t *retlen, u_char *buf) ++ u_char *buf) + { + struct m25p *flash = nor->priv; + struct spi_device *spi = flash->spi; +@@ -161,7 +160,6 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, + ret = m.actual_length - m25p_cmdsz(nor) - dummy; + if (ret < 0) + return -EIO; +- *retlen += ret; + return ret; + } + +################# + +Do not pass retlen to hardware driver read/write functions. Update it in +spi-nor generic driver instead. + +Signed-off-by: Michal Suchanek +Signed-off-by: Hou Zhiqiang +Integrated-by: Jiang Yutang +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 16 ++++++---------- + drivers/mtd/spi-nor/spi-nor.c | 21 +++++++++++++-------- + include/linux/mtd/spi-nor.h | 4 ++-- + 3 files changed, 21 insertions(+), 20 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -620,7 +620,7 @@ static inline void fsl_qspi_invalid(stru + + static ssize_t fsl_qspi_nor_write(struct fsl_qspi *q, struct spi_nor *nor, + u8 opcode, unsigned int to, u32 *txbuf, +- unsigned count, size_t *retlen) ++ unsigned count) + { + int ret, i, j; + u32 tmp; +@@ -647,11 +647,8 @@ static ssize_t fsl_qspi_nor_write(struct + /* Trigger it */ + ret = fsl_qspi_runcmd(q, opcode, to, count); + +- if (ret == 0) { +- if (retlen) +- *retlen += count; ++ if (ret == 0) + return count; +- } + + return ret; + } +@@ -862,7 +859,7 @@ static int fsl_qspi_write_reg(struct spi + + } else if (len > 0) { + ret = fsl_qspi_nor_write(q, nor, opcode, 0, +- (u32 *)buf, len, NULL); ++ (u32 *)buf, len); + if (ret > 0) + return 0; + } else { +@@ -874,12 +871,11 @@ static int fsl_qspi_write_reg(struct spi + } + + static ssize_t fsl_qspi_write(struct spi_nor *nor, loff_t to, +- size_t len, size_t *retlen, const u_char *buf) ++ size_t len, const u_char *buf) + { + struct fsl_qspi *q = nor->priv; +- + ssize_t ret = fsl_qspi_nor_write(q, nor, nor->program_opcode, to, +- (u32 *)buf, len, retlen); ++ (u32 *)buf, len); + + /* invalid the data in the AHB buffer. */ + fsl_qspi_invalid(q); +@@ -887,7 +883,7 @@ static ssize_t fsl_qspi_write(struct spi + } + + static ssize_t fsl_qspi_read(struct spi_nor *nor, loff_t from, +- size_t len, size_t *retlen, u_char *buf) ++ size_t len, u_char *buf) + { + struct fsl_qspi *q = nor->priv; + u8 cmd = nor->read_opcode; +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -919,12 +919,13 @@ static int spi_nor_read(struct mtd_info + if (ret) + return ret; + +- ret = nor->read(nor, from, len, retlen, buf); ++ ret = nor->read(nor, from, len, buf); + + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ); + if (ret < 0) + return ret; + ++ *retlen += ret; + return 0; + } + +@@ -951,7 +952,7 @@ static int sst_write(struct mtd_info *mt + nor->program_opcode = SPINOR_OP_BP; + + /* write one byte. */ +- ret = nor->write(nor, to, 1, retlen, buf); ++ ret = nor->write(nor, to, 1, buf); + if (ret < 0) + goto sst_write_err; + WARN(ret != 1, "While writing 1 byte written %i bytes\n", +@@ -967,7 +968,7 @@ static int sst_write(struct mtd_info *mt + nor->program_opcode = SPINOR_OP_AAI_WP; + + /* write two bytes. */ +- ret = nor->write(nor, to, 2, retlen, buf + actual); ++ ret = nor->write(nor, to, 2, buf + actual); + if (ret < 0) + goto sst_write_err; + WARN(ret != 2, "While writing 2 bytes written %i bytes\n", +@@ -990,7 +991,7 @@ static int sst_write(struct mtd_info *mt + write_enable(nor); + + nor->program_opcode = SPINOR_OP_BP; +- ret = nor->write(nor, to, 1, retlen, buf + actual); ++ ret = nor->write(nor, to, 1, buf + actual); + if (ret < 0) + goto sst_write_err; + WARN(ret != 1, "While writing 1 byte written %i bytes\n", +@@ -999,8 +1000,10 @@ static int sst_write(struct mtd_info *mt + if (ret) + goto sst_write_err; + write_disable(nor); ++ actual += 1; + } + sst_write_err: ++ *retlen += actual; + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); + return ret; + } +@@ -1029,15 +1032,17 @@ static int spi_nor_write(struct mtd_info + + /* do all the bytes fit onto one page? */ + if (page_offset + len <= nor->page_size) { +- ret = nor->write(nor, to, len, retlen, buf); ++ ret = nor->write(nor, to, len, buf); + if (ret < 0) + goto write_err; ++ *retlen += ret; + } else { + /* the size of data remaining on the first page */ + page_size = nor->page_size - page_offset; +- ret = nor->write(nor, to, page_size, retlen, buf); ++ ret = nor->write(nor, to, page_size, buf); + if (ret < 0) + goto write_err; ++ *retlen += ret; + + /* write everything in nor->page_size chunks */ + for (i = ret; i < len; ) { +@@ -1051,10 +1056,10 @@ static int spi_nor_write(struct mtd_info + + write_enable(nor); + +- ret = nor->write(nor, to + i, page_size, retlen, +- buf + i); ++ ret = nor->write(nor, to + i, page_size, buf + i); + if (ret < 0) + goto write_err; ++ *retlen += ret; + i += ret; + } + } +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -171,9 +171,9 @@ struct spi_nor { + int (*write_reg)(struct spi_nor *nor, u8 opcode, u8 *buf, int len); + + ssize_t (*read)(struct spi_nor *nor, loff_t from, +- size_t len, size_t *retlen, u_char *read_buf); ++ size_t len, u_char *read_buf); + ssize_t (*write)(struct spi_nor *nor, loff_t to, +- size_t len, size_t *retlen, const u_char *write_buf); ++ size_t len, const u_char *write_buf); + int (*erase)(struct spi_nor *nor, loff_t offs); + + int (*flash_lock)(struct spi_nor *nor, loff_t ofs, uint64_t len); diff --git a/target/linux/layerscape/patches-4.4/1095-mtd-spi-nor-simplify-write-loop.patch b/target/linux/layerscape/patches-4.4/1095-mtd-spi-nor-simplify-write-loop.patch new file mode 100644 index 0000000000..8eb957db5d --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1095-mtd-spi-nor-simplify-write-loop.patch @@ -0,0 +1,100 @@ +From 93b40e12f7e580a41c4aee5597579cc539fd8544 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek +Date: Wed, 2 Dec 2015 10:38:20 +0000 +Subject: [PATCH 095/113] mtd: spi-nor: simplify write loop + +The spi-nor write loop assumes that what is passed to the hardware +driver write() is what gets written. + +When write() writes less than page size at once data is dropped on the +floor. Check the amount of data writen and exit if it does not match +requested amount. + +Signed-off-by: Michal Suchanek +Signed-off-by: Hou Zhiqiang +--- + drivers/mtd/spi-nor/spi-nor.c | 58 ++++++++++++++++++----------------------- + 1 file changed, 25 insertions(+), 33 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -1017,8 +1017,8 @@ static int spi_nor_write(struct mtd_info + size_t *retlen, const u_char *buf) + { + struct spi_nor *nor = mtd_to_spi_nor(mtd); +- u32 page_offset, page_size, i; +- int ret; ++ size_t page_offset, page_remain, i; ++ ssize_t ret; + + dev_dbg(nor->dev, "to 0x%08x, len %zd\n", (u32)to, len); + +@@ -1026,45 +1026,37 @@ static int spi_nor_write(struct mtd_info + if (ret) + return ret; + +- write_enable(nor); ++ for (i = 0; i < len; ) { ++ ssize_t written; + +- page_offset = to & (nor->page_size - 1); +- +- /* do all the bytes fit onto one page? */ +- if (page_offset + len <= nor->page_size) { +- ret = nor->write(nor, to, len, buf); +- if (ret < 0) +- goto write_err; +- *retlen += ret; +- } else { ++ page_offset = to & (nor->page_size - 1); ++ WARN_ONCE(page_offset, ++ "Writing at offset %zu into a NOR page. Writing partial pages may decrease reliability and increase wear of NOR flash.", ++ page_offset); + /* the size of data remaining on the first page */ +- page_size = nor->page_size - page_offset; +- ret = nor->write(nor, to, page_size, buf); ++ page_remain = min_t(size_t, ++ nor->page_size - page_offset, len - i); ++ ++ write_enable(nor); ++ ret = nor->write(nor, to + i, page_remain, buf + i); + if (ret < 0) + goto write_err; +- *retlen += ret; ++ written = ret; + +- /* write everything in nor->page_size chunks */ +- for (i = ret; i < len; ) { +- page_size = len - i; +- if (page_size > nor->page_size) +- page_size = nor->page_size; +- +- ret = spi_nor_wait_till_ready(nor); +- if (ret) +- goto write_err; +- +- write_enable(nor); +- +- ret = nor->write(nor, to + i, page_size, buf + i); +- if (ret < 0) +- goto write_err; +- *retlen += ret; +- i += ret; ++ ret = spi_nor_wait_till_ready(nor); ++ if (ret) ++ goto write_err; ++ *retlen += written; ++ i += written; ++ if (written != page_remain) { ++ dev_err(nor->dev, ++ "While writing %zu bytes written %zd bytes\n", ++ page_remain, written); ++ ret = -EIO; ++ goto write_err; + } + } + +- ret = spi_nor_wait_till_ready(nor); + write_err: + spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE); + return ret; diff --git a/target/linux/layerscape/patches-4.4/1096-mtd-spi-nor-add-read-loop.patch b/target/linux/layerscape/patches-4.4/1096-mtd-spi-nor-add-read-loop.patch new file mode 100644 index 0000000000..db557e9d19 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1096-mtd-spi-nor-add-read-loop.patch @@ -0,0 +1,46 @@ +From b5929f91416d64afacf46c649f38cc8f0eea50d2 Mon Sep 17 00:00:00 2001 +From: Michal Suchanek +Date: Wed, 2 Dec 2015 10:38:20 +0000 +Subject: [PATCH 096/113] mtd: spi-nor: add read loop + +mtdblock and ubi do not handle the situation when read returns less data +than requested. Loop in spi-nor until buffer is filled or an error is +returned. + +Signed-off-by: Michal Suchanek +Signed-off-by: Hou Zhiqiang +--- + drivers/mtd/spi-nor/spi-nor.c | 20 ++++++++++++++------ + 1 file changed, 14 insertions(+), 6 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -919,14 +919,22 @@ static int spi_nor_read(struct mtd_info + if (ret) + return ret; + +- ret = nor->read(nor, from, len, buf); ++ while (len) { ++ ret = nor->read(nor, from, len, buf); ++ if (ret <= 0) ++ goto read_err; + +- spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ); +- if (ret < 0) +- return ret; ++ WARN_ON(ret > len); ++ *retlen += ret; ++ buf += ret; ++ from += ret; ++ len -= ret; ++ } ++ ret = 0; + +- *retlen += ret; +- return 0; ++read_err: ++ spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ); ++ return ret; + } + + static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, diff --git a/target/linux/layerscape/patches-4.4/1097-mtd-fsl-quadspi-use-the-property-fields-of-SPI-NOR.patch b/target/linux/layerscape/patches-4.4/1097-mtd-fsl-quadspi-use-the-property-fields-of-SPI-NOR.patch new file mode 100644 index 0000000000..d07264d605 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1097-mtd-fsl-quadspi-use-the-property-fields-of-SPI-NOR.patch @@ -0,0 +1,87 @@ +From 5c315652c1b43a6a3abe48c2842cde822ac0ff3c Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Wed, 20 Jan 2016 18:40:31 +0800 +Subject: [PATCH 097/113] mtd:fsl-quadspi:use the property fields of SPI-NOR + +We can get the read/write/erase opcode from the spi nor framework +directly. This patch uses the information stored in the SPI-NOR to +remove the hardcode in the fsl_qspi_init_lut(). + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 40 +++++++++++-------------------------- + 1 file changed, 12 insertions(+), 28 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -373,9 +373,13 @@ static void fsl_qspi_init_lut(struct fsl + void __iomem *base = q->iobase; + int rxfifo = q->devtype_data->rxfifo; + u32 lut_base; +- u8 cmd, addrlen, dummy; + int i; + ++ struct spi_nor *nor = &q->nor[0]; ++ u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; ++ u8 read_op = nor->read_opcode; ++ u8 read_dm = nor->read_dummy; ++ + fsl_qspi_unlock_lut(q); + + /* Clear all the LUT table */ +@@ -385,20 +389,10 @@ static void fsl_qspi_init_lut(struct fsl + /* Quad Read */ + lut_base = SEQID_QUAD_READ * 4; + +- if (q->nor_size <= SZ_16M) { +- cmd = SPINOR_OP_READ_1_1_4; +- addrlen = ADDR24BIT; +- dummy = 8; +- } else { +- /* use the 4-byte address */ +- cmd = SPINOR_OP_READ_1_1_4; +- addrlen = ADDR32BIT; +- dummy = 8; +- } +- +- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), ++ qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); +- qspi_writel(q, LUT0(DUMMY, PAD1, dummy) | LUT1(FSL_READ, PAD4, rxfifo), ++ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | ++ LUT1(FSL_READ, PAD4, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + + /* Write enable */ +@@ -409,16 +403,8 @@ static void fsl_qspi_init_lut(struct fsl + /* Page Program */ + lut_base = SEQID_PP * 4; + +- if (q->nor_size <= SZ_16M) { +- cmd = SPINOR_OP_PP; +- addrlen = ADDR24BIT; +- } else { +- /* use the 4-byte address */ +- cmd = SPINOR_OP_PP; +- addrlen = ADDR32BIT; +- } +- +- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), ++ qspi_writel(q, LUT0(CMD, PAD1, nor->program_opcode) | ++ LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + qspi_writel(q, LUT0(FSL_WRITE, PAD1, 0), + base + QUADSPI_LUT(lut_base + 1)); +@@ -432,10 +418,8 @@ static void fsl_qspi_init_lut(struct fsl + /* Erase a sector */ + lut_base = SEQID_SE * 4; + +- cmd = q->nor[0].erase_opcode; +- addrlen = q->nor_size <= SZ_16M ? ADDR24BIT : ADDR32BIT; +- +- qspi_writel(q, LUT0(CMD, PAD1, cmd) | LUT1(ADDR, PAD1, addrlen), ++ qspi_writel(q, LUT0(CMD, PAD1, nor->erase_opcode) | ++ LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); + + /* Erase the whole chip */ diff --git a/target/linux/layerscape/patches-4.4/1098-mtd-fsl-quadspi-Rename-SEQID_QUAD_READ-to-SEQID_READ.patch b/target/linux/layerscape/patches-4.4/1098-mtd-fsl-quadspi-Rename-SEQID_QUAD_READ-to-SEQID_READ.patch new file mode 100644 index 0000000000..f27ea21dd8 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1098-mtd-fsl-quadspi-Rename-SEQID_QUAD_READ-to-SEQID_READ.patch @@ -0,0 +1,46 @@ +From c8f9be7df954fce18e96074af3f07aa5f75399e0 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Wed, 20 Jan 2016 15:52:25 +0800 +Subject: [PATCH 098/113] mtd: fsl-quadspi: Rename SEQID_QUAD_READ to + SEQID_READ + +There are some read modes for flash, such as NORMAL, FAST, +QUAD, DDR QUAD. These modes will use the identical lut table base +So rename SEQID_QUAD_READ to SEQID_READ. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 8 ++++---- + 1 file changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -193,7 +193,7 @@ + #define QUADSPI_LUT_NUM 64 + + /* SEQID -- we can have 16 seqids at most. */ +-#define SEQID_QUAD_READ 0 ++#define SEQID_READ 0 + #define SEQID_WREN 1 + #define SEQID_WRDI 2 + #define SEQID_RDSR 3 +@@ -386,8 +386,8 @@ static void fsl_qspi_init_lut(struct fsl + for (i = 0; i < QUADSPI_LUT_NUM; i++) + qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4); + +- /* Quad Read */ +- lut_base = SEQID_QUAD_READ * 4; ++ /* Read */ ++ lut_base = SEQID_READ * 4; + + qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), + base + QUADSPI_LUT(lut_base)); +@@ -468,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl + { + switch (cmd) { + case SPINOR_OP_READ_1_1_4: +- return SEQID_QUAD_READ; ++ return SEQID_READ; + case SPINOR_OP_WREN: + return SEQID_WREN; + case SPINOR_OP_WRDI: diff --git a/target/linux/layerscape/patches-4.4/1099-mtd-spi-nor-fsl-quadspi-Add-fast-read-mode-support.patch b/target/linux/layerscape/patches-4.4/1099-mtd-spi-nor-fsl-quadspi-Add-fast-read-mode-support.patch new file mode 100644 index 0000000000..ac99ba9504 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1099-mtd-spi-nor-fsl-quadspi-Add-fast-read-mode-support.patch @@ -0,0 +1,72 @@ +From c501cdf57682265b72a8180c06e4a01dc2978375 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Mon, 1 Feb 2016 18:26:23 +0800 +Subject: [PATCH 099/113] mtd:spi-nor:fsl-quadspi:Add fast-read mode support + +The qspi driver add generic fast-read mode for different +flash venders. There are some different board flash work on +different mode, such fast-read, quad-mode. +So we have to modify the third entrace parameter of spi_nor_scan(). + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 27 +++++++++++++++++++++------ + 1 file changed, 21 insertions(+), 6 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -389,11 +389,21 @@ static void fsl_qspi_init_lut(struct fsl + /* Read */ + lut_base = SEQID_READ * 4; + +- qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), +- base + QUADSPI_LUT(lut_base)); +- qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | +- LUT1(FSL_READ, PAD4, rxfifo), +- base + QUADSPI_LUT(lut_base + 1)); ++ if (nor->flash_read == SPI_NOR_FAST) { ++ qspi_writel(q, LUT0(CMD, PAD1, read_op) | ++ LUT1(ADDR, PAD1, addrlen), ++ base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | ++ LUT1(FSL_READ, PAD1, rxfifo), ++ base + QUADSPI_LUT(lut_base + 1)); ++ } else if (nor->flash_read == SPI_NOR_QUAD) { ++ qspi_writel(q, LUT0(CMD, PAD1, read_op) | ++ LUT1(ADDR, PAD1, addrlen), ++ base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | ++ LUT1(FSL_READ, PAD4, rxfifo), ++ base + QUADSPI_LUT(lut_base + 1)); ++ } + + /* Write enable */ + lut_base = SEQID_WREN * 4; +@@ -468,6 +478,7 @@ static int fsl_qspi_get_seqid(struct fsl + { + switch (cmd) { + case SPINOR_OP_READ_1_1_4: ++ case SPINOR_OP_READ_FAST: + return SEQID_READ; + case SPINOR_OP_WREN: + return SEQID_WREN; +@@ -964,6 +975,7 @@ static int fsl_qspi_probe(struct platfor + struct spi_nor *nor; + struct mtd_info *mtd; + int ret, i = 0; ++ enum read_mode mode = SPI_NOR_QUAD; + + q = devm_kzalloc(dev, sizeof(*q), GFP_KERNEL); + if (!q) +@@ -1065,7 +1077,10 @@ static int fsl_qspi_probe(struct platfor + /* set the chip address for READID */ + fsl_qspi_set_base_addr(q, nor); + +- ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); ++ ret = of_property_read_bool(np, "m25p,fast-read"); ++ mode = (ret) ? SPI_NOR_FAST : SPI_NOR_QUAD; ++ ++ ret = spi_nor_scan(nor, NULL, mode); + if (ret) + goto mutex_failed; + diff --git a/target/linux/layerscape/patches-4.4/1100-mtd-spi_nor-Disable-Micron-flash-HW-protection.patch b/target/linux/layerscape/patches-4.4/1100-mtd-spi_nor-Disable-Micron-flash-HW-protection.patch new file mode 100644 index 0000000000..733b62c7fc --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1100-mtd-spi_nor-Disable-Micron-flash-HW-protection.patch @@ -0,0 +1,41 @@ +From e892dea7229d56b75c46a76b9039f9e179584a91 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Mon, 1 Feb 2016 18:48:49 +0800 +Subject: [PATCH 100/113] mtd:spi_nor: Disable Micron flash HW protection + +For Micron family ,The status register write enable/disable bit, +provides hardware data protection for the device. +When the enable/disable bit is set to 1, the status register +nonvolatile bits become read-only and the WRITE STATUS REGISTER +operation will not execute. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/spi-nor.c | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -39,6 +39,7 @@ + + #define SPI_NOR_MAX_ID_LEN 6 + #define SPI_NOR_MAX_ADDR_WIDTH 4 ++#define SPI_NOR_MICRON_WRITE_ENABLE 0x7f + + struct flash_info { + char *name; +@@ -1237,6 +1238,14 @@ int spi_nor_scan(struct spi_nor *nor, co + if (ret) + return ret; + ++ if (JEDEC_MFR(info) == SNOR_MFR_MICRON) { ++ ret = read_sr(nor); ++ ret &= SPI_NOR_MICRON_WRITE_ENABLE; ++ ++ write_enable(nor); ++ write_sr(nor, ret); ++ } ++ + if (!mtd->name) + mtd->name = dev_name(dev); + mtd->priv = nor; diff --git a/target/linux/layerscape/patches-4.4/1101-mtd-spi-nor-fsl-quadspi-extend-support-for-some-spec.patch b/target/linux/layerscape/patches-4.4/1101-mtd-spi-nor-fsl-quadspi-extend-support-for-some-spec.patch new file mode 100644 index 0000000000..471ce4225f --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1101-mtd-spi-nor-fsl-quadspi-extend-support-for-some-spec.patch @@ -0,0 +1,122 @@ +From acfc6e9b34b3b3ca0d8bbe366dd08b0fac21c740 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Tue, 2 Feb 2016 12:21:12 +0800 +Subject: [PATCH 101/113] mtd: spi-nor: fsl-quadspi: extend support for some + special requerment. + +Add extra info in LUT table to support some special requerments. +Spansion S25FS-S family flash need some special operations. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 44 +++++++++++++++++++++++++++++++++++-- + include/linux/mtd/spi-nor.h | 4 ++++ + 2 files changed, 46 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -205,6 +205,9 @@ + #define SEQID_RDCR 9 + #define SEQID_EN4B 10 + #define SEQID_BRWR 11 ++#define SEQID_RDAR 12 ++#define SEQID_WRAR 13 ++ + + #define QUADSPI_MIN_IOMAP SZ_4M + +@@ -470,6 +473,28 @@ static void fsl_qspi_init_lut(struct fsl + qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR), + base + QUADSPI_LUT(lut_base)); + ++ /* ++ * Read any device register. ++ * Used for Spansion S25FS-S family flash only. ++ */ ++ lut_base = SEQID_RDAR * 4; ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) | ++ LUT1(ADDR, PAD1, ADDR24BIT), ++ base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1), ++ base + QUADSPI_LUT(lut_base + 1)); ++ ++ /* ++ * Write any device register. ++ * Used for Spansion S25FS-S family flash only. ++ */ ++ lut_base = SEQID_WRAR * 4; ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_WRAR) | ++ LUT1(ADDR, PAD1, ADDR24BIT), ++ base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(FSL_WRITE, PAD1, 1), ++ base + QUADSPI_LUT(lut_base + 1)); ++ + fsl_qspi_lock_lut(q); + } + +@@ -477,9 +502,15 @@ static void fsl_qspi_init_lut(struct fsl + static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) + { + switch (cmd) { ++ case SPINOR_OP_READ4_1_1_4: + case SPINOR_OP_READ_1_1_4: + case SPINOR_OP_READ_FAST: ++ case SPINOR_OP_READ4_FAST: + return SEQID_READ; ++ case SPINOR_OP_SPANSION_RDAR: ++ return SEQID_RDAR; ++ case SPINOR_OP_SPANSION_WRAR: ++ return SEQID_WRAR; + case SPINOR_OP_WREN: + return SEQID_WREN; + case SPINOR_OP_WRDI: +@@ -491,6 +522,7 @@ static int fsl_qspi_get_seqid(struct fsl + case SPINOR_OP_CHIP_ERASE: + return SEQID_CHIP_ERASE; + case SPINOR_OP_PP: ++ case SPINOR_OP_PP_4B: + return SEQID_PP; + case SPINOR_OP_RDID: + return SEQID_RDID; +@@ -830,8 +862,12 @@ static int fsl_qspi_read_reg(struct spi_ + { + int ret; + struct fsl_qspi *q = nor->priv; ++ u32 to = 0; ++ ++ if (opcode == SPINOR_OP_SPANSION_RDAR) ++ memcpy(&to, nor->cmd_buf, 4); + +- ret = fsl_qspi_runcmd(q, opcode, 0, len); ++ ret = fsl_qspi_runcmd(q, opcode, to, len); + if (ret) + return ret; + +@@ -843,9 +879,13 @@ static int fsl_qspi_write_reg(struct spi + { + struct fsl_qspi *q = nor->priv; + int ret; ++ u32 to = 0; ++ ++ if (opcode == SPINOR_OP_SPANSION_WRAR) ++ memcpy(&to, nor->cmd_buf, 4); + + if (!buf) { +- ret = fsl_qspi_runcmd(q, opcode, 0, 1); ++ ret = fsl_qspi_runcmd(q, opcode, to, 1); + if (ret) + return ret; + +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -74,6 +74,10 @@ + /* Used for Spansion flashes only. */ + #define SPINOR_OP_BRWR 0x17 /* Bank register write */ + ++/* Used for Spansion S25FS-S family flash only. */ ++#define SPINOR_OP_SPANSION_RDAR 0x65 /* Read any device register */ ++#define SPINOR_OP_SPANSION_WRAR 0x71 /* Write any device register */ ++ + /* Used for Micron flashes only. */ + #define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */ + #define SPINOR_OP_WD_EVCR 0x61 /* Write EVCR register */ diff --git a/target/linux/layerscape/patches-4.4/1102-mtd-spi-nor-fsl-quadspi-Support-qspi-for-ls2080a.patch b/target/linux/layerscape/patches-4.4/1102-mtd-spi-nor-fsl-quadspi-Support-qspi-for-ls2080a.patch new file mode 100644 index 0000000000..da9dd72a96 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1102-mtd-spi-nor-fsl-quadspi-Support-qspi-for-ls2080a.patch @@ -0,0 +1,83 @@ +From d2d88e3432d68b11b0add84bd15a3aadaf44f1c1 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Mon, 28 Dec 2015 18:25:56 +0800 +Subject: [PATCH 102/113] mtd: spi-nor: fsl-quadspi:Support qspi for ls2080a + +There is a hardware feature that qspi_amba_base is added +internally by SOC design on ls2080a. So as to software, the driver +need support to the feature. + +Signed-off-by: Yunhui Cui +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 24 ++++++++++++++++++++++-- + 1 file changed, 22 insertions(+), 2 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -41,6 +41,8 @@ + #define QUADSPI_QUIRK_TKT253890 (1 << 2) + /* Controller cannot wake up from wait mode, TKT245618 */ + #define QUADSPI_QUIRK_TKT245618 (1 << 3) ++/* QSPI_AMBA_BASE is internally added by SOC design */ ++#define QUADSPI_AMBA_BASE_INTERNAL (0x10000) + + /* The registers */ + #define QUADSPI_MCR 0x00 +@@ -217,6 +219,7 @@ enum fsl_qspi_devtype { + FSL_QUADSPI_IMX7D, + FSL_QUADSPI_IMX6UL, + FSL_QUADSPI_LS1021A, ++ FSL_QUADSPI_LS2080A, + }; + + struct fsl_qspi_devtype_data { +@@ -270,6 +273,14 @@ static struct fsl_qspi_devtype_data ls10 + .driver_data = 0, + }; + ++static struct fsl_qspi_devtype_data ls2080a_data = { ++ .devtype = FSL_QUADSPI_LS2080A, ++ .rxfifo = 128, ++ .txfifo = 64, ++ .ahb_buf_size = 1024, ++ .driver_data = QUADSPI_AMBA_BASE_INTERNAL, ++}; ++ + #define FSL_QSPI_MAX_CHIP 4 + struct fsl_qspi { + struct spi_nor nor[FSL_QSPI_MAX_CHIP]; +@@ -312,6 +323,11 @@ static inline int needs_wakeup_wait_mode + return q->devtype_data->driver_data & QUADSPI_QUIRK_TKT245618; + } + ++static inline int has_added_amba_base_internal(struct fsl_qspi *q) ++{ ++ return q->devtype_data->driver_data & QUADSPI_AMBA_BASE_INTERNAL; ++} ++ + /* + * R/W functions for big- or little-endian registers: + * The qSPI controller's endian is independent of the CPU core's endian. +@@ -558,8 +574,11 @@ fsl_qspi_runcmd(struct fsl_qspi *q, u8 c + /* save the reg */ + reg = qspi_readl(q, base + QUADSPI_MCR); + +- qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr, +- base + QUADSPI_SFAR); ++ if (has_added_amba_base_internal(q)) ++ qspi_writel(q, q->chip_base_addr + addr, base + QUADSPI_SFAR); ++ else ++ qspi_writel(q, q->memmap_phy + q->chip_base_addr + addr, ++ base + QUADSPI_SFAR); + qspi_writel(q, QUADSPI_RBCT_WMRK_MASK | QUADSPI_RBCT_RXBRD_USEIPS, + base + QUADSPI_RBCT); + qspi_writel(q, reg | QUADSPI_MCR_CLR_RXF_MASK, base + QUADSPI_MCR); +@@ -849,6 +868,7 @@ static const struct of_device_id fsl_qsp + { .compatible = "fsl,imx7d-qspi", .data = (void *)&imx7d_data, }, + { .compatible = "fsl,imx6ul-qspi", .data = (void *)&imx6ul_data, }, + { .compatible = "fsl,ls1021a-qspi", .data = (void *)&ls1021a_data, }, ++ { .compatible = "fsl,ls2080a-qspi", .data = (void *)&ls2080a_data, }, + { /* sentinel */ } + }; + MODULE_DEVICE_TABLE(of, fsl_qspi_dt_ids); diff --git a/target/linux/layerscape/patches-4.4/1103-mtd-spi-nor-Support-R-W-for-S25FS-S-family-flash.patch b/target/linux/layerscape/patches-4.4/1103-mtd-spi-nor-Support-R-W-for-S25FS-S-family-flash.patch new file mode 100644 index 0000000000..92041e908e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1103-mtd-spi-nor-Support-R-W-for-S25FS-S-family-flash.patch @@ -0,0 +1,110 @@ +From 0878404f549021e7fe0a49ae0454cf53fd452add Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Tue, 2 Feb 2016 12:00:27 +0800 +Subject: [PATCH 103/113] mtd: spi-nor: Support R/W for S25FS-S family flash + +With the physical sectors combination, S25FS-S family flash +requires some special operations for read/write functions. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/spi-nor.c | 60 +++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 60 insertions(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -40,6 +40,10 @@ + #define SPI_NOR_MAX_ID_LEN 6 + #define SPI_NOR_MAX_ADDR_WIDTH 4 + #define SPI_NOR_MICRON_WRITE_ENABLE 0x7f ++/* Added for S25FS-S family flash */ ++#define SPINOR_CONFIG_REG3_OFFSET 0x800004 ++#define CR3V_4KB_ERASE_UNABLE 0x8 ++#define SPINOR_S25FS_FAMILY_ID 0x81 + + struct flash_info { + char *name; +@@ -73,6 +77,8 @@ struct flash_info { + }; + + #define JEDEC_MFR(info) ((info)->id[0]) ++#define EXT_ID(info) ((info)->id[5]) ++ + + static const struct flash_info *spi_nor_match_id(const char *name); + +@@ -784,6 +790,7 @@ static const struct flash_info spi_nor_i + */ + { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, ++ { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)}, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, +@@ -908,6 +915,53 @@ static const struct flash_info *spi_nor_ + return ERR_PTR(-ENODEV); + } + ++/* ++ * The S25FS-S family physical sectors may be configured as a ++ * hybrid combination of eight 4-kB parameter sectors ++ * at the top or bottom of the address space with all ++ * but one of the remaining sectors being uniform size. ++ * The Parameter Sector Erase commands (20h or 21h) must ++ * be used to erase the 4-kB parameter sectors individually. ++ * The Sector (uniform sector) Erase commands (D8h or DCh) ++ * must be used to erase any of the remaining ++ * sectors, including the portion of highest or lowest address ++ * sector that is not overlaid by the parameter sectors. ++ * The uniform sector erase command has no effect on parameter sectors. ++ */ ++static int spansion_s25fs_disable_4kb_erase(struct spi_nor *nor) ++{ ++ struct fsl_qspi *q; ++ u32 cr3v_addr = SPINOR_CONFIG_REG3_OFFSET; ++ u8 cr3v = 0x0; ++ int ret = 0x0; ++ ++ q = nor->priv; ++ ++ nor->cmd_buf[2] = cr3v_addr >> 16; ++ nor->cmd_buf[1] = cr3v_addr >> 8; ++ nor->cmd_buf[0] = cr3v_addr >> 0; ++ ++ ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1); ++ if (ret) ++ return ret; ++ if (cr3v & CR3V_4KB_ERASE_UNABLE) ++ return 0; ++ ret = nor->write_reg(nor, SPINOR_OP_WREN, NULL, 0); ++ if (ret) ++ return ret; ++ cr3v = CR3V_4KB_ERASE_UNABLE; ++ nor->program_opcode = SPINOR_OP_SPANSION_WRAR; ++ nor->write(nor, cr3v_addr, 1, &cr3v); ++ ++ ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1); ++ if (ret) ++ return ret; ++ if (!(cr3v & CR3V_4KB_ERASE_UNABLE)) ++ return -EPERM; ++ ++ return 0; ++} ++ + static int spi_nor_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) + { +@@ -1246,6 +1300,12 @@ int spi_nor_scan(struct spi_nor *nor, co + write_sr(nor, ret); + } + ++ if (EXT_ID(info) == SPINOR_S25FS_FAMILY_ID) { ++ ret = spansion_s25fs_disable_4kb_erase(nor); ++ if (ret) ++ return ret; ++ } ++ + if (!mtd->name) + mtd->name = dev_name(dev); + mtd->priv = nor; diff --git a/target/linux/layerscape/patches-4.4/1104-mtd-fsl-quadspi-Add-quad-mode-for-flash-n25q128.patch b/target/linux/layerscape/patches-4.4/1104-mtd-fsl-quadspi-Add-quad-mode-for-flash-n25q128.patch new file mode 100644 index 0000000000..daf34e3388 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1104-mtd-fsl-quadspi-Add-quad-mode-for-flash-n25q128.patch @@ -0,0 +1,112 @@ +From 23cd071c47c064d56921975d196dc22177069dea Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Wed, 24 Feb 2016 15:14:01 +0800 +Subject: [PATCH 104/113] mtd: fsl-quadspi: Add quad mode for flash n25q128 + +Add some lut_tables to support quad mode for flash n25q128 +on the board ls1021a-twr and solve flash Spansion and Micron +command conflict. +In switch {}, The value of command SPINOR_OP_RD_EVCR and +SPINOR_OP_SPANSION_RDAR is the same. They have to share +the same seq_id: SEQID_RDAR_OR_RD_EVCR. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 47 ++++++++++++++++++++++++++++--------- + 1 file changed, 36 insertions(+), 11 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -207,9 +207,9 @@ + #define SEQID_RDCR 9 + #define SEQID_EN4B 10 + #define SEQID_BRWR 11 +-#define SEQID_RDAR 12 ++#define SEQID_RDAR_OR_RD_EVCR 12 + #define SEQID_WRAR 13 +- ++#define SEQID_WD_EVCR 14 + + #define QUADSPI_MIN_IOMAP SZ_4M + +@@ -393,6 +393,7 @@ static void fsl_qspi_init_lut(struct fsl + int rxfifo = q->devtype_data->rxfifo; + u32 lut_base; + int i; ++ const struct fsl_qspi_devtype_data *devtype_data = q->devtype_data; + + struct spi_nor *nor = &q->nor[0]; + u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; +@@ -489,16 +490,26 @@ static void fsl_qspi_init_lut(struct fsl + qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_BRWR), + base + QUADSPI_LUT(lut_base)); + ++ + /* +- * Read any device register. +- * Used for Spansion S25FS-S family flash only. ++ * Flash Micron and Spansion command confilict ++ * use the same value 0x65. But it indicates different meaning. + */ +- lut_base = SEQID_RDAR * 4; +- qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) | +- LUT1(ADDR, PAD1, ADDR24BIT), +- base + QUADSPI_LUT(lut_base)); +- qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1), +- base + QUADSPI_LUT(lut_base + 1)); ++ lut_base = SEQID_RDAR_OR_RD_EVCR * 4; ++ if (devtype_data->devtype == FSL_QUADSPI_LS2080A) { ++ /* ++ * Read any device register. ++ * Used for Spansion S25FS-S family flash only. ++ */ ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_SPANSION_RDAR) | ++ LUT1(ADDR, PAD1, ADDR24BIT), ++ base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(DUMMY, PAD1, 8) | LUT1(FSL_READ, PAD1, 1), ++ base + QUADSPI_LUT(lut_base + 1)); ++ } else { ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_RD_EVCR), ++ base + QUADSPI_LUT(lut_base)); ++ } + + /* + * Write any device register. +@@ -511,6 +522,11 @@ static void fsl_qspi_init_lut(struct fsl + qspi_writel(q, LUT0(FSL_WRITE, PAD1, 1), + base + QUADSPI_LUT(lut_base + 1)); + ++ /* Write EVCR register */ ++ lut_base = SEQID_WD_EVCR * 4; ++ qspi_writel(q, LUT0(CMD, PAD1, SPINOR_OP_WD_EVCR), ++ base + QUADSPI_LUT(lut_base)); ++ + fsl_qspi_lock_lut(q); + } + +@@ -523,8 +539,15 @@ static int fsl_qspi_get_seqid(struct fsl + case SPINOR_OP_READ_FAST: + case SPINOR_OP_READ4_FAST: + return SEQID_READ; ++ /* ++ * Spansion & Micron use the same command value 0x65 ++ * Spansion: SPINOR_OP_SPANSION_RDAR, read any register. ++ * Micron: SPINOR_OP_RD_EVCR, ++ * read enhanced volatile configuration register. ++ * case SPINOR_OP_RD_EVCR: ++ */ + case SPINOR_OP_SPANSION_RDAR: +- return SEQID_RDAR; ++ return SEQID_RDAR_OR_RD_EVCR; + case SPINOR_OP_SPANSION_WRAR: + return SEQID_WRAR; + case SPINOR_OP_WREN: +@@ -550,6 +573,8 @@ static int fsl_qspi_get_seqid(struct fsl + return SEQID_EN4B; + case SPINOR_OP_BRWR: + return SEQID_BRWR; ++ case SPINOR_OP_WD_EVCR: ++ return SEQID_WD_EVCR; + default: + if (cmd == q->nor[0].erase_opcode) + return SEQID_SE; diff --git a/target/linux/layerscape/patches-4.4/1105-mtd-spi-nor-add-DDR-quad-read-support.patch b/target/linux/layerscape/patches-4.4/1105-mtd-spi-nor-add-DDR-quad-read-support.patch new file mode 100644 index 0000000000..bed44b8783 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1105-mtd-spi-nor-add-DDR-quad-read-support.patch @@ -0,0 +1,181 @@ +From 924f021c0344554a4b61746e5c4dcfc91d618ce2 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Thu, 18 Feb 2016 16:41:53 +0800 +Subject: [PATCH 105/113] mtd: spi-nor: add DDR quad read support + +This patch adds the DDR quad read support by the following: + + [1] add SPI_NOR_DDR_QUAD read mode. + + [2] add DDR Quad read opcodes: + SPINOR_OP_READ_1_4_4_D / SPINOR_OP_READ4_1_4_4_D + + [3] add set_ddr_quad_mode() to initialize for the DDR quad read. + Currently it only works for Spansion NOR. + + [4] set dummy with 6 for Spansion family +Test this patch for Spansion s25fl128s NOR flash. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/spi-nor.c | 53 ++++++++++++++++++++++++++++++++++++----- + include/linux/mtd/spi-nor.h | 8 +++++-- + 2 files changed, 53 insertions(+), 8 deletions(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -73,7 +73,8 @@ struct flash_info { + #define SECT_4K_PMC 0x10 /* SPINOR_OP_BE_4K_PMC works uniformly */ + #define SPI_NOR_DUAL_READ 0x20 /* Flash supports Dual Read */ + #define SPI_NOR_QUAD_READ 0x40 /* Flash supports Quad Read */ +-#define USE_FSR 0x80 /* use flag status register */ ++#define SPI_NOR_DDR_QUAD_READ 0x80 /* Flash supports DDR Quad Read */ ++#define USE_FSR 0x100 /* use flag status register */ + }; + + #define JEDEC_MFR(info) ((info)->id[0]) +@@ -144,13 +145,17 @@ static int read_cr(struct spi_nor *nor) + * It can be used to support more commands with + * different dummy cycle requirements. + */ +-static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor) ++static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor, ++ const struct flash_info *info) + { + switch (nor->flash_read) { + case SPI_NOR_FAST: + case SPI_NOR_DUAL: + case SPI_NOR_QUAD: + return 8; ++ case SPI_NOR_DDR_QUAD: ++ if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) ++ return 6; + case SPI_NOR_NORMAL: + return 0; + } +@@ -797,7 +802,8 @@ static const struct flash_info spi_nor_i + { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, + { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, + { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, +- { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, ++ { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ ++ | SPI_NOR_DDR_QUAD_READ) }, + { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, +@@ -1186,6 +1192,23 @@ static int spansion_quad_enable(struct s + return 0; + } + ++static int set_ddr_quad_mode(struct spi_nor *nor, const struct flash_info *info) ++{ ++ int status; ++ ++ switch (JEDEC_MFR(info)) { ++ case SNOR_MFR_SPANSION: ++ status = spansion_quad_enable(nor); ++ if (status) { ++ dev_err(nor->dev, "Spansion DDR quad-read not enabled\n"); ++ return status; ++ } ++ return status; ++ default: ++ return -EINVAL; ++ } ++} ++ + static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info) + { + int status; +@@ -1375,8 +1398,15 @@ int spi_nor_scan(struct spi_nor *nor, co + if (info->flags & SPI_NOR_NO_FR) + nor->flash_read = SPI_NOR_NORMAL; + +- /* Quad/Dual-read mode takes precedence over fast/normal */ +- if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { ++ /* DDR Quad/Quad/Dual-read mode takes precedence over fast/normal */ ++ if (mode == SPI_NOR_DDR_QUAD && info->flags & SPI_NOR_DDR_QUAD_READ) { ++ ret = set_ddr_quad_mode(nor, info); ++ if (ret) { ++ dev_err(dev, "DDR quad mode not supported\n"); ++ return ret; ++ } ++ nor->flash_read = SPI_NOR_DDR_QUAD; ++ } else if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { + ret = set_quad_mode(nor, info); + if (ret) { + dev_err(dev, "quad mode not supported\n"); +@@ -1389,6 +1419,14 @@ int spi_nor_scan(struct spi_nor *nor, co + + /* Default commands */ + switch (nor->flash_read) { ++ case SPI_NOR_DDR_QUAD: ++ if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) { /* Spansion */ ++ nor->read_opcode = SPINOR_OP_READ_1_4_4_D; ++ } else { ++ dev_err(dev, "DDR Quad Read is not supported.\n"); ++ return -EINVAL; ++ } ++ break; + case SPI_NOR_QUAD: + nor->read_opcode = SPINOR_OP_READ_1_1_4; + break; +@@ -1416,6 +1454,9 @@ int spi_nor_scan(struct spi_nor *nor, co + if (JEDEC_MFR(info) == SNOR_MFR_SPANSION) { + /* Dedicated 4-byte command set */ + switch (nor->flash_read) { ++ case SPI_NOR_DDR_QUAD: ++ nor->read_opcode = SPINOR_OP_READ4_1_4_4_D; ++ break; + case SPI_NOR_QUAD: + nor->read_opcode = SPINOR_OP_READ4_1_1_4; + break; +@@ -1445,7 +1486,7 @@ int spi_nor_scan(struct spi_nor *nor, co + return -EINVAL; + } + +- nor->read_dummy = spi_nor_read_dummy_cycles(nor); ++ nor->read_dummy = spi_nor_read_dummy_cycles(nor, info); + + dev_info(dev, "%s (%lld Kbytes)\n", info->name, + (long long)mtd->size >> 10); +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -30,10 +30,11 @@ + + /* + * Note on opcode nomenclature: some opcodes have a format like +- * SPINOR_OP_FUNCTION{4,}_x_y_z. The numbers x, y, and z stand for the number ++ * SPINOR_OP_FUNCTION{4,}_x_y_z{_D}. The numbers x, y,and z stand for the number + * of I/O lines used for the opcode, address, and data (respectively). The + * FUNCTION has an optional suffix of '4', to represent an opcode which +- * requires a 4-byte (32-bit) address. ++ * requires a 4-byte (32-bit) address. The suffix of 'D' stands for the ++ * DDR mode. + */ + + /* Flash opcodes. */ +@@ -44,6 +45,7 @@ + #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ + #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual SPI) */ + #define SPINOR_OP_READ_1_1_4 0x6b /* Read data bytes (Quad SPI) */ ++#define SPINOR_OP_READ_1_4_4_D 0xed /* Read data bytes (DDR Quad SPI) */ + #define SPINOR_OP_PP 0x02 /* Page program (up to 256 bytes) */ + #define SPINOR_OP_BE_4K 0x20 /* Erase 4KiB block */ + #define SPINOR_OP_BE_4K_PMC 0xd7 /* Erase 4KiB block on PMC chips */ +@@ -59,6 +61,7 @@ + #define SPINOR_OP_READ4_FAST 0x0c /* Read data bytes (high frequency) */ + #define SPINOR_OP_READ4_1_1_2 0x3c /* Read data bytes (Dual SPI) */ + #define SPINOR_OP_READ4_1_1_4 0x6c /* Read data bytes (Quad SPI) */ ++#define SPINOR_OP_READ4_1_4_4_D 0xee /* Read data bytes (DDR Quad SPI) */ + #define SPINOR_OP_PP_4B 0x12 /* Page program (up to 256 bytes) */ + #define SPINOR_OP_SE_4B 0xdc /* Sector erase (usually 64KiB) */ + +@@ -107,6 +110,7 @@ enum read_mode { + SPI_NOR_FAST, + SPI_NOR_DUAL, + SPI_NOR_QUAD, ++ SPI_NOR_DDR_QUAD, + }; + + #define SPI_NOR_MAX_CMD_SIZE 8 diff --git a/target/linux/layerscape/patches-4.4/1106-mtd-fsl-quadspi-add-DDR-quad-read-for-Spansion.patch b/target/linux/layerscape/patches-4.4/1106-mtd-fsl-quadspi-add-DDR-quad-read-for-Spansion.patch new file mode 100644 index 0000000000..3a242608ba --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1106-mtd-fsl-quadspi-add-DDR-quad-read-for-Spansion.patch @@ -0,0 +1,122 @@ +From 16eb35ceea5b43e6f64c1a869721ea86c0da5260 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Thu, 25 Feb 2016 10:19:15 +0800 +Subject: [PATCH 106/113] mtd: fsl-quadspi: add DDR quad read for Spansion + +Add the DDR quad read support for the fsl-quadspi driver. +And, add the Spansion s25fl128s NOR flash ddr quad mode +support. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 57 +++++++++++++++++++++++++++++++++++++ + 1 file changed, 57 insertions(+) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -296,6 +296,7 @@ struct fsl_qspi { + u32 nor_size; + u32 nor_num; + u32 clk_rate; ++ u32 ddr_smp; + unsigned int chip_base_addr; /* We may support two chips. */ + bool has_second_chip; + bool big_endian; +@@ -423,6 +424,19 @@ static void fsl_qspi_init_lut(struct fsl + qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | + LUT1(FSL_READ, PAD4, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); ++ } else if (nor->flash_read == SPI_NOR_DDR_QUAD) { ++ /* read mode : 1-4-4, such as Spansion s25fl128s. */ ++ qspi_writel(q, LUT0(CMD, PAD1, read_op) ++ | LUT1(ADDR_DDR, PAD4, addrlen), ++ base + QUADSPI_LUT(lut_base)); ++ ++ qspi_writel(q, LUT0(MODE_DDR, PAD4, 0xff) ++ | LUT1(DUMMY, PAD1, read_dm), ++ base + QUADSPI_LUT(lut_base + 1)); ++ ++ qspi_writel(q, LUT0(FSL_READ_DDR, PAD4, rxfifo) ++ | LUT1(JMP_ON_CS, PAD1, 0), ++ base + QUADSPI_LUT(lut_base + 2)); + } + + /* Write enable */ +@@ -534,6 +548,8 @@ static void fsl_qspi_init_lut(struct fsl + static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) + { + switch (cmd) { ++ case SPINOR_OP_READ_1_4_4_D: ++ case SPINOR_OP_READ4_1_4_4_D: + case SPINOR_OP_READ4_1_1_4: + case SPINOR_OP_READ_1_1_4: + case SPINOR_OP_READ_FAST: +@@ -736,6 +752,32 @@ static void fsl_qspi_set_map_addr(struct + } + + /* ++ * enable controller ddr quad mode to support different ++ * vender flashes ddr quad mode. ++ */ ++static void set_ddr_quad_mode(struct fsl_qspi *q) ++{ ++ u32 reg, reg2; ++ ++ reg = qspi_readl(q, q->iobase + QUADSPI_MCR); ++ ++ /* Firstly, disable the module */ ++ qspi_writel(q, reg | QUADSPI_MCR_MDIS_MASK, q->iobase + QUADSPI_MCR); ++ ++ /* Set the Sampling Register for DDR */ ++ reg2 = qspi_readl(q, q->iobase + QUADSPI_SMPR); ++ reg2 &= ~QUADSPI_SMPR_DDRSMP_MASK; ++ reg2 |= (((q->ddr_smp) << QUADSPI_SMPR_DDRSMP_SHIFT) & ++ QUADSPI_SMPR_DDRSMP_MASK); ++ qspi_writel(q, reg2, q->iobase + QUADSPI_SMPR); ++ ++ /* Enable the module again (enable the DDR too) */ ++ reg |= QUADSPI_MCR_DDR_EN_MASK; ++ qspi_writel(q, reg, q->iobase + QUADSPI_MCR); ++ ++} ++ ++/* + * There are two different ways to read out the data from the flash: + * the "IP Command Read" and the "AHB Command Read". + * +@@ -775,6 +817,11 @@ static void fsl_qspi_init_abh_read(struc + seqid = fsl_qspi_get_seqid(q, q->nor[0].read_opcode); + qspi_writel(q, seqid << QUADSPI_BFGENCR_SEQID_SHIFT, + q->iobase + QUADSPI_BFGENCR); ++ ++ /* enable the DDR quad read */ ++ if (q->nor->flash_read == SPI_NOR_DDR_QUAD) ++ set_ddr_quad_mode(q); ++ + } + + /* This function was used to prepare and enable QSPI clock */ +@@ -1108,6 +1155,12 @@ static int fsl_qspi_probe(struct platfor + goto clk_failed; + } + ++ /* find ddrsmp value */ ++ ret = of_property_read_u32(dev->of_node, "fsl,ddr-sampling-point", ++ &q->ddr_smp); ++ if (ret) ++ q->ddr_smp = 0; ++ + /* find the irq */ + ret = platform_get_irq(pdev, 0); + if (ret < 0) { +@@ -1164,6 +1217,10 @@ static int fsl_qspi_probe(struct platfor + + ret = of_property_read_bool(np, "m25p,fast-read"); + mode = (ret) ? SPI_NOR_FAST : SPI_NOR_QUAD; ++ /* Can we enable the DDR Quad Read? */ ++ ret = of_property_read_bool(np, "ddr-quad-read"); ++ if (ret) ++ mode = SPI_NOR_DDR_QUAD; + + ret = spi_nor_scan(nor, NULL, mode); + if (ret) diff --git a/target/linux/layerscape/patches-4.4/1107-mtd-fsl-quadspi-disable-AHB-buffer-prefetch.patch b/target/linux/layerscape/patches-4.4/1107-mtd-fsl-quadspi-disable-AHB-buffer-prefetch.patch new file mode 100644 index 0000000000..19dff6c92e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1107-mtd-fsl-quadspi-disable-AHB-buffer-prefetch.patch @@ -0,0 +1,67 @@ +From 50aac689d5be0a086f076cd4bc8b14ee0b9ab995 Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Tue, 8 Mar 2016 14:38:52 +0800 +Subject: [PATCH 107/113] mtd: fsl-quadspi: disable AHB buffer prefetch + +A-009282: QuadSPI: QuadSPI data pre-fetch can result in incorrect data +Affects: QuadSPI +Description: With AHB buffer prefetch enabled, the QuadSPI may return +incorrect data on the AHB +interface. The buffer pre-fetch is enabled if the fetch size as +configured either in the LUT or in +the BUFxCR register is greater than 8 bytes. +Impact: Only 64 bit read allowed. +Workaround: Keep the read data size to 64 bits (8 Bytes), which disables +the prefetch on the AHB buffer, +and prevents this issue from occurring. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 29 +++++++++++++++++++++++------ + 1 file changed, 23 insertions(+), 6 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -794,19 +794,36 @@ static void fsl_qspi_init_abh_read(struc + { + void __iomem *base = q->iobase; + int seqid; ++ const struct fsl_qspi_devtype_data *devtype_data = q->devtype_data; + + /* AHB configuration for access buffer 0/1/2 .*/ + qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF0CR); + qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF1CR); + qspi_writel(q, QUADSPI_BUFXCR_INVALID_MSTRID, base + QUADSPI_BUF2CR); ++ + /* +- * Set ADATSZ with the maximum AHB buffer size to improve the +- * read performance. ++ * Errata: A-009282: QuadSPI data prefetch may result in incorrect data ++ * Workaround: Keep the read data size to 64 bits (8 bytes). ++ * This disables the prefetch on the AHB buffer and ++ * prevents this issue from occurring. + */ +- qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | +- ((q->devtype_data->ahb_buf_size / 8) +- << QUADSPI_BUF3CR_ADATSZ_SHIFT), +- base + QUADSPI_BUF3CR); ++ if (devtype_data->devtype == FSL_QUADSPI_LS2080A || ++ devtype_data->devtype == FSL_QUADSPI_LS1021A) { ++ ++ qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | ++ (1 << QUADSPI_BUF3CR_ADATSZ_SHIFT), ++ base + QUADSPI_BUF3CR); ++ ++ } else { ++ /* ++ * Set ADATSZ with the maximum AHB buffer size to improve the ++ * read performance. ++ */ ++ qspi_writel(q, QUADSPI_BUF3CR_ALLMST_MASK | ++ ((q->devtype_data->ahb_buf_size / 8) ++ << QUADSPI_BUF3CR_ADATSZ_SHIFT), ++ base + QUADSPI_BUF3CR); ++ } + + /* We only use the buffer3 */ + qspi_writel(q, 0, base + QUADSPI_BUF0IND); diff --git a/target/linux/layerscape/patches-4.4/1108-mtd-fsl-quadspi-add-multi-flash-chip-R-W-on-ls2080a.patch b/target/linux/layerscape/patches-4.4/1108-mtd-fsl-quadspi-add-multi-flash-chip-R-W-on-ls2080a.patch new file mode 100644 index 0000000000..4a7a5cbcdf --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1108-mtd-fsl-quadspi-add-multi-flash-chip-R-W-on-ls2080a.patch @@ -0,0 +1,42 @@ +From d3a8ee41170ff9e5298ff354c77ff99439dfe2bf Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Thu, 10 Mar 2016 11:33:40 +0800 +Subject: [PATCH 108/113] mtd: fsl-quadspi: add multi flash chip R/W on + ls2080a + +There is a hardware feature that qspi_amba_base is added +internally by SOC design on ls2080a. so memmap_phy need not +be added in driver. If memmap_phy is added, the flash A1 +addr space is [0, memmap_phy] which far more than flash size. +The AMBA memory will be divided into four parts and assign to +every chipselect. Every channel will has two valid chipselects. + +Signed-off-by: Yunhui Cui +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 14 ++++++++++---- + 1 file changed, 10 insertions(+), 4 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -744,11 +744,17 @@ static void fsl_qspi_set_map_addr(struct + { + int nor_size = q->nor_size; + void __iomem *base = q->iobase; ++ u32 mem_base; + +- qspi_writel(q, nor_size + q->memmap_phy, base + QUADSPI_SFA1AD); +- qspi_writel(q, nor_size * 2 + q->memmap_phy, base + QUADSPI_SFA2AD); +- qspi_writel(q, nor_size * 3 + q->memmap_phy, base + QUADSPI_SFB1AD); +- qspi_writel(q, nor_size * 4 + q->memmap_phy, base + QUADSPI_SFB2AD); ++ if (has_added_amba_base_internal(q)) ++ mem_base = 0x0; ++ else ++ mem_base = q->memmap_phy; ++ ++ qspi_writel(q, nor_size + mem_base, base + QUADSPI_SFA1AD); ++ qspi_writel(q, nor_size * 2 + mem_base, base + QUADSPI_SFA2AD); ++ qspi_writel(q, nor_size * 3 + mem_base, base + QUADSPI_SFB1AD); ++ qspi_writel(q, nor_size * 4 + mem_base, base + QUADSPI_SFB2AD); + } + + /* diff --git a/target/linux/layerscape/patches-4.4/1109-drivers-mtd-spi-nor-Enable-QSPI-Flash-in-Kernel.patch b/target/linux/layerscape/patches-4.4/1109-drivers-mtd-spi-nor-Enable-QSPI-Flash-in-Kernel.patch new file mode 100644 index 0000000000..ec6423dc29 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1109-drivers-mtd-spi-nor-Enable-QSPI-Flash-in-Kernel.patch @@ -0,0 +1,36 @@ +From 70516f60de441829e7813c0b26567c8bda39c011 Mon Sep 17 00:00:00 2001 +From: Pratiyush Mohan Srivastava +Date: Sun, 24 Apr 2016 23:20:26 +0530 +Subject: [PATCH 109/113] drivers: mtd: spi-nor: Enable QSPI Flash in Kernel + +Enable read from QSPI flash, Write onto QSPI Flash and +erase QSPI Flash in Fast mode in Kernel. + +Signed-off-by: Pratiyush Mohan Srivastava +Signed-off-by: Prabhakar Kushwaha +--- + drivers/mtd/spi-nor/spi-nor.c | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -796,6 +796,7 @@ static const struct flash_info spi_nor_i + { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)}, ++ { "s25fs512s", INFO6(0x010220, 0x4d0081, 128 * 1024, 512, 0)}, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, +@@ -962,9 +963,11 @@ static int spansion_s25fs_disable_4kb_er + ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1); + if (ret) + return ret; ++/* + if (!(cr3v & CR3V_4KB_ERASE_UNABLE)) + return -EPERM; + ++*/ + return 0; + } + diff --git a/target/linux/layerscape/patches-4.4/1110-mtd-spi-nor-fsl-quad-add-flash-S25FS-extra-support.patch b/target/linux/layerscape/patches-4.4/1110-mtd-spi-nor-fsl-quad-add-flash-S25FS-extra-support.patch new file mode 100644 index 0000000000..2b21b11165 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1110-mtd-spi-nor-fsl-quad-add-flash-S25FS-extra-support.patch @@ -0,0 +1,157 @@ +From 034dd6241b55ab2256eecb845e941fa9b45da38e Mon Sep 17 00:00:00 2001 +From: Yunhui Cui +Date: Thu, 28 Apr 2016 17:03:57 +0800 +Subject: [PATCH 110/113] mtd: spi-nor: fsl-quad: add flash S25FS extra + support + +[context adjustment] +not apply changes of arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts + +There are some boards have the same QSPI controller but have +different vendor flash, So, the controller can use the same +compatible and share the driver, just for a different flash to do +the appropriate adaptation. Based on this, we need add the vendor +field in spi-nor, Because we will use the field to distribute +corresponding LUT for different flash operations. + +Signed-off-by: Yunhui Cui +Signed-off-by: Pratiyush Mohan Srivastava +Signed-off-by: Prabhakar Kushwaha +Integrated-by: Jiang Yutang +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 47 ++++++++++++++++++++++++++++++------- + drivers/mtd/spi-nor/spi-nor.c | 5 ++-- + include/linux/mtd/spi-nor.h | 1 + + 3 files changed, 42 insertions(+), 11 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -213,6 +213,9 @@ + + #define QUADSPI_MIN_IOMAP SZ_4M + ++#define FLASH_VENDOR_SPANSION_FS "s25fs" ++#define SPANSION_S25FS_FAMILY (1 << 1) ++ + enum fsl_qspi_devtype { + FSL_QUADSPI_VYBRID, + FSL_QUADSPI_IMX6SX, +@@ -329,6 +332,18 @@ static inline int has_added_amba_base_in + return q->devtype_data->driver_data & QUADSPI_AMBA_BASE_INTERNAL; + } + ++static u32 fsl_get_nor_vendor(struct spi_nor *nor) ++{ ++ u32 vendor_id; ++ ++ if (nor->vendor) { ++ if (memcmp(nor->vendor, FLASH_VENDOR_SPANSION_FS, ++ sizeof(FLASH_VENDOR_SPANSION_FS) - 1)) ++ vendor_id = SPANSION_S25FS_FAMILY; ++ } ++ return vendor_id; ++} ++ + /* + * R/W functions for big- or little-endian registers: + * The qSPI controller's endian is independent of the CPU core's endian. +@@ -394,13 +409,15 @@ static void fsl_qspi_init_lut(struct fsl + int rxfifo = q->devtype_data->rxfifo; + u32 lut_base; + int i; +- const struct fsl_qspi_devtype_data *devtype_data = q->devtype_data; ++ u32 vendor; + + struct spi_nor *nor = &q->nor[0]; + u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT; + u8 read_op = nor->read_opcode; + u8 read_dm = nor->read_dummy; + ++ vendor = fsl_get_nor_vendor(nor); ++ + fsl_qspi_unlock_lut(q); + + /* Clear all the LUT table */ +@@ -418,12 +435,25 @@ static void fsl_qspi_init_lut(struct fsl + LUT1(FSL_READ, PAD1, rxfifo), + base + QUADSPI_LUT(lut_base + 1)); + } else if (nor->flash_read == SPI_NOR_QUAD) { +- qspi_writel(q, LUT0(CMD, PAD1, read_op) | +- LUT1(ADDR, PAD1, addrlen), +- base + QUADSPI_LUT(lut_base)); +- qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | +- LUT1(FSL_READ, PAD4, rxfifo), +- base + QUADSPI_LUT(lut_base + 1)); ++ if (q->nor_size == 0x4000000) { ++ read_op = 0xEC; ++ qspi_writel(q, ++ LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD4, addrlen), ++ base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, ++ LUT0(MODE, PAD4, 0xff) | LUT1(DUMMY, PAD4, read_dm), ++ base + QUADSPI_LUT(lut_base + 1)); ++ qspi_writel(q, ++ LUT0(FSL_READ, PAD4, rxfifo), ++ base + QUADSPI_LUT(lut_base + 2)); ++ } else { ++ qspi_writel(q, LUT0(CMD, PAD1, read_op) | ++ LUT1(ADDR, PAD1, addrlen), ++ base + QUADSPI_LUT(lut_base)); ++ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) | ++ LUT1(FSL_READ, PAD4, rxfifo), ++ base + QUADSPI_LUT(lut_base + 1)); ++ } + } else if (nor->flash_read == SPI_NOR_DDR_QUAD) { + /* read mode : 1-4-4, such as Spansion s25fl128s. */ + qspi_writel(q, LUT0(CMD, PAD1, read_op) +@@ -510,7 +540,8 @@ static void fsl_qspi_init_lut(struct fsl + * use the same value 0x65. But it indicates different meaning. + */ + lut_base = SEQID_RDAR_OR_RD_EVCR * 4; +- if (devtype_data->devtype == FSL_QUADSPI_LS2080A) { ++ ++ if (vendor == SPANSION_S25FS_FAMILY) { + /* + * Read any device register. + * Used for Spansion S25FS-S family flash only. +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -796,7 +796,6 @@ static const struct flash_info spi_nor_i + { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)}, +- { "s25fs512s", INFO6(0x010220, 0x4d0081, 128 * 1024, 512, 0)}, + { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, + { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, +@@ -963,11 +962,9 @@ static int spansion_s25fs_disable_4kb_er + ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1); + if (ret) + return ret; +-/* + if (!(cr3v & CR3V_4KB_ERASE_UNABLE)) + return -EPERM; + +-*/ + return 0; + } + +@@ -1334,6 +1331,8 @@ int spi_nor_scan(struct spi_nor *nor, co + + if (!mtd->name) + mtd->name = dev_name(dev); ++ if (info->name) ++ nor->vendor = info->name; + mtd->priv = nor; + mtd->type = MTD_NORFLASH; + mtd->writesize = 1; +--- a/include/linux/mtd/spi-nor.h ++++ b/include/linux/mtd/spi-nor.h +@@ -172,6 +172,7 @@ struct spi_nor { + bool sst_write_second; + u32 flags; + u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE]; ++ char *vendor; + + int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops); + void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops); diff --git a/target/linux/layerscape/patches-4.4/1111-mtd-spi-nor-disable-4kb-sector-erase-for-s25fl128.patch b/target/linux/layerscape/patches-4.4/1111-mtd-spi-nor-disable-4kb-sector-erase-for-s25fl128.patch new file mode 100644 index 0000000000..503fa7104b --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1111-mtd-spi-nor-disable-4kb-sector-erase-for-s25fl128.patch @@ -0,0 +1,27 @@ +From 30d34abc80b0a602a1327bdfbddd42d250887049 Mon Sep 17 00:00:00 2001 +From: Yutang Jiang +Date: Fri, 9 Sep 2016 22:56:12 +0800 +Subject: [PATCH 111/113] mtd: spi-nor: disable 4kb sector erase for s25fl128 + +As for s25fl128s flash, the sectors are organized either as a hybrid +combination of 4-kB and 64-kB sectors, or as uniform 256-kbyte sectors. +we should use the command 0xd8 to erase all bits, not the Parameter 4-kB +Sector Erase (P4E) command 0x20. + +Signed-off-by: Yunhui Cui +Integrated-by: Yutang Jiang +--- + drivers/mtd/spi-nor/spi-nor.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/spi-nor.c ++++ b/drivers/mtd/spi-nor/spi-nor.c +@@ -802,7 +802,7 @@ static const struct flash_info spi_nor_i + { "s70fl01gs", INFO(0x010221, 0x4d00, 256 * 1024, 256, 0) }, + { "s25sl12800", INFO(0x012018, 0x0300, 256 * 1024, 64, 0) }, + { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, +- { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ ++ { "s25fl128s", INFO6(0x012018, 0x4d0180, 64 * 1024, 256, SPI_NOR_QUAD_READ + | SPI_NOR_DDR_QUAD_READ) }, + { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, diff --git a/target/linux/layerscape/patches-4.4/1112-driver-spi-fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch b/target/linux/layerscape/patches-4.4/1112-driver-spi-fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch new file mode 100644 index 0000000000..c6311fc4bb --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1112-driver-spi-fsl-quad-Hang-memcpy-Unhandled-fault-alig.patch @@ -0,0 +1,29 @@ +From f1b7824a42505669476f203e126fc26dd1006af2 Mon Sep 17 00:00:00 2001 +From: Yutang Jiang +Date: Fri, 9 Sep 2016 22:57:55 +0800 +Subject: [PATCH 112/113] driver: spi: fsl-quad: Hang memcpy: Unhandled fault: + alignment fault + +vmap/iomap based on whether the buffer is in memory region or reserved region. +However, both map it as non-cacheable memory. +For armv8 specifically, non-cacheable mapping requests use a memory type +that has to be accessed aligned to the request size. memcpy() doesn't guarantee +that. memcpy_toio() can guarantee 4-bytes alignment. + +Signed-off-by: Yunhui Cui +Integrated-by: Yutang Jiang +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -1103,7 +1103,7 @@ static ssize_t fsl_qspi_read(struct spi_ + len); + + /* Read out the data directly from the AHB buffer.*/ +- memcpy(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, ++ memcpy_toio(buf, q->ahb_addr + q->chip_base_addr + from - q->memmap_offs, + len); + + return len; diff --git a/target/linux/layerscape/patches-4.4/1113-mtd-spi-nor-fsl-quad-move-mtd_device_register-to-the.patch b/target/linux/layerscape/patches-4.4/1113-mtd-spi-nor-fsl-quad-move-mtd_device_register-to-the.patch new file mode 100644 index 0000000000..f54f9854e3 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/1113-mtd-spi-nor-fsl-quad-move-mtd_device_register-to-the.patch @@ -0,0 +1,49 @@ +From 6f1195d231ab576809fe2f4cff44a6e48cff2457 Mon Sep 17 00:00:00 2001 +From: Yutang Jiang +Date: Fri, 2 Sep 2016 22:00:16 +0800 +Subject: [PATCH 113/113] mtd: spi-nor: fsl-quad: move mtd_device_register to + the last of probe + +After call mtd_device_register, the mtd devices should be workable immediately. +If before finish all of init work call the mtd_device_register, it will not +respond work request timely. + +For example, openwrt/lede have a AUTO split special flash partitions mechanism +while mtd driver register. So, before call mtd_device_register, must let all of +init work ready. + +Signed-off-by: Yutang Jiang +--- + drivers/mtd/spi-nor/fsl-quadspi.c | 14 ++++++++++---- + 1 file changed, 10 insertions(+), 4 deletions(-) + +--- a/drivers/mtd/spi-nor/fsl-quadspi.c ++++ b/drivers/mtd/spi-nor/fsl-quadspi.c +@@ -1280,10 +1280,6 @@ static int fsl_qspi_probe(struct platfor + if (ret) + goto mutex_failed; + +- ret = mtd_device_register(mtd, NULL, 0); +- if (ret) +- goto mutex_failed; +- + /* Set the correct NOR size now. */ + if (q->nor_size == 0) { + q->nor_size = mtd->size; +@@ -1313,6 +1309,16 @@ static int fsl_qspi_probe(struct platfor + goto last_init_failed; + + fsl_qspi_clk_disable_unprep(q); ++ ++ for (i = 0; i < q->nor_num; i++) { ++ /* skip the holes */ ++ if (!q->has_second_chip) ++ i *= 2; ++ ++ ret = mtd_device_register(&q->nor[i].mtd, NULL, 0); ++ if (ret) ++ goto last_init_failed; ++ } + return 0; + + last_init_failed: diff --git a/target/linux/layerscape/patches-4.4/2119-armv8-aarch32-defconfig-Enable-CAAM-support.patch b/target/linux/layerscape/patches-4.4/2119-armv8-aarch32-defconfig-Enable-CAAM-support.patch new file mode 100644 index 0000000000..567195d1fa --- /dev/null +++ b/target/linux/layerscape/patches-4.4/2119-armv8-aarch32-defconfig-Enable-CAAM-support.patch @@ -0,0 +1,31 @@ +From 035fe1e511e053c6650f37626deb5da76dcc1d92 Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 11:29:48 +0800 +Subject: [PATCH 119/124] armv8: aarch32: defconfig: Enable CAAM support + +This patch is to enable the driver module for Freescale's Cryptographics +Accelerator and Assurance Module (CAAM) and related options. + +Signed-off-by: Alison Wang +--- + arch/arm/configs/ls_aarch32_defconfig | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +--- a/arch/arm/configs/ls_aarch32_defconfig ++++ b/arch/arm/configs/ls_aarch32_defconfig +@@ -200,8 +200,13 @@ CONFIG_MAGIC_SYSRQ=y + # CONFIG_FTRACE is not set + CONFIG_PID_IN_CONTEXTIDR=y + CONFIG_CRYPTO_LZO=y +-# CONFIG_CRYPTO_ANSI_CPRNG is not set +-# CONFIG_CRYPTO_HW is not set ++CONFIG_CRYPTO_ANSI_CPRNG=y ++CONFIG_CRYPTO_DEV_FSL_CAAM=y ++CONFIG_ARM_CRYPTO=y ++CONFIG_CRYPTO_SHA1_ARM_NEON=y ++CONFIG_CRYPTO_SHA256_ARM=y ++CONFIG_CRYPTO_SHA512_ARM_NEON=y ++CONFIG_CRYPTO_AES_ARM_BS=y + CONFIG_CRC_CCITT=m + CONFIG_CRC_T10DIF=y + CONFIG_CRC7=m diff --git a/target/linux/layerscape/patches-4.4/2120-armv8-aarch32-defconfig-Enable-firmware-loading.patch b/target/linux/layerscape/patches-4.4/2120-armv8-aarch32-defconfig-Enable-firmware-loading.patch new file mode 100644 index 0000000000..26a981c9ef --- /dev/null +++ b/target/linux/layerscape/patches-4.4/2120-armv8-aarch32-defconfig-Enable-firmware-loading.patch @@ -0,0 +1,23 @@ +From 027ca2530ce94dd7d9954e57631aa34987db392e Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 11:38:36 +0800 +Subject: [PATCH 120/124] armv8: aarch32: defconfig: Enable firmware loading + +As some modules require userspace firmware loading support, such as +PPFE, add this feature in the defconfig for AArch32 on ARMv8. + +Signed-off-by: Alison Wang +--- + arch/arm/configs/ls_aarch32_defconfig | 1 - + 1 file changed, 1 deletion(-) + +--- a/arch/arm/configs/ls_aarch32_defconfig ++++ b/arch/arm/configs/ls_aarch32_defconfig +@@ -71,7 +71,6 @@ CONFIG_CAN=y + CONFIG_CAN_FLEXCAN=y + CONFIG_DEVTMPFS=y + CONFIG_DEVTMPFS_MOUNT=y +-# CONFIG_FW_LOADER is not set + CONFIG_DMA_CMA=y + CONFIG_MTD=y + CONFIG_MTD_CMDLINE_PARTS=y diff --git a/target/linux/layerscape/patches-4.4/2121-armv8-aarch32-defconfig-Enable-support-for-AHCI-SATA.patch b/target/linux/layerscape/patches-4.4/2121-armv8-aarch32-defconfig-Enable-support-for-AHCI-SATA.patch new file mode 100644 index 0000000000..a3a67c37bf --- /dev/null +++ b/target/linux/layerscape/patches-4.4/2121-armv8-aarch32-defconfig-Enable-support-for-AHCI-SATA.patch @@ -0,0 +1,29 @@ +From ff37b165bdb100450c7996c9fac0fad2e6ffe31d Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 11:40:37 +0800 +Subject: [PATCH 121/124] armv8: aarch32: defconfig: Enable support for AHCI + SATA + +This patch is to enable support for the Freescale QorIQ AHCI SoC's +onboard AHCI SATA. + +Signed-off-by: Alison Wang +--- + arch/arm/configs/ls_aarch32_defconfig | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/arm/configs/ls_aarch32_defconfig ++++ b/arch/arm/configs/ls_aarch32_defconfig +@@ -92,7 +92,12 @@ CONFIG_MTD_SPI_NOR=y + CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y + CONFIG_SPI_FSL_QUADSPI=y + CONFIG_BLK_DEV_SD=y ++CONFIG_CHR_DEV_SG=y + CONFIG_ATA=y ++CONFIG_SATA_AHCI=y ++CONFIG_SATA_AHCI_PLATFORM=y ++CONFIG_AHCI_QORIQ=y ++CONFIG_SATA_SIL24=y + CONFIG_BLK_DEV_LOOP=y + CONFIG_BLK_DEV_RAM=y + CONFIG_BLK_DEV_RAM_COUNT=8 diff --git a/target/linux/layerscape/patches-4.4/2122-armv8-aarch32-defconfig-Enable-USB-and-related-confi.patch b/target/linux/layerscape/patches-4.4/2122-armv8-aarch32-defconfig-Enable-USB-and-related-confi.patch new file mode 100644 index 0000000000..83d372ba67 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/2122-armv8-aarch32-defconfig-Enable-USB-and-related-confi.patch @@ -0,0 +1,31 @@ +From 913db32774fe5c818112232823edfda1a706552f Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 11:42:40 +0800 +Subject: [PATCH 122/124] armv8: aarch32: defconfig: Enable USB and related + configuration options + +This patch is to enable USB and related configuration options for +AArch32 on ARMv8. + +Signed-off-by: Alison Wang +--- + arch/arm/configs/ls_aarch32_defconfig | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/arm/configs/ls_aarch32_defconfig ++++ b/arch/arm/configs/ls_aarch32_defconfig +@@ -154,8 +154,14 @@ CONFIG_MFD_SYSCON=y + CONFIG_FB=y + CONFIG_USB=y + CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_EHCI_HCD_PLATFORM=y ++CONFIG_USB_OHCI_HCD=y ++CONFIG_USB_OHCI_HCD_PLATFORM=y ++CONFIG_USB_STORAGE=y + CONFIG_USB_DWC3=y + CONFIG_USB_STORAGE=y ++CONFIG_USB_ULPI=y + CONFIG_MMC=y + CONFIG_MMC_SDHCI=y + CONFIG_MMC_SDHCI_PLTFM=y diff --git a/target/linux/layerscape/patches-4.4/2123-armv8-aarch32-defconfig-Enable-KVM-related-configura.patch b/target/linux/layerscape/patches-4.4/2123-armv8-aarch32-defconfig-Enable-KVM-related-configura.patch new file mode 100644 index 0000000000..4556ad9e00 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/2123-armv8-aarch32-defconfig-Enable-KVM-related-configura.patch @@ -0,0 +1,59 @@ +From dbf356cd062d6313f90323a77d4cf7c820dae40f Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 13:51:32 +0800 +Subject: [PATCH 123/124] armv8: aarch32: defconfig: Enable KVM-related + configuration options + +This patch is to enable KVM-related configuration options for host and +guest. + +Signed-off-by: Alison Wang +--- + arch/arm/configs/ls_aarch32_defconfig | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm/configs/ls_aarch32_defconfig ++++ b/arch/arm/configs/ls_aarch32_defconfig +@@ -102,7 +102,11 @@ CONFIG_BLK_DEV_LOOP=y + CONFIG_BLK_DEV_RAM=y + CONFIG_BLK_DEV_RAM_COUNT=8 + CONFIG_BLK_DEV_RAM_SIZE=262144 ++CONFIG_VIRTIO_BLK=y + CONFIG_NETDEVICES=y ++CONFIG_TUN=y ++CONFIG_VIRTIO_NET=y ++CONFIG_VHOST_NET=y + CONFIG_NET_VENDOR_FREESCALE is not set + CONFIG_FSL_BMAN=y + CONFIG_FSL_QMAN=y +@@ -130,6 +134,8 @@ CONFIG_SERIAL_8250=y + CONFIG_SERIAL_8250_CONSOLE=y + CONFIG_SERIAL_8250_EXTENDED=y + CONFIG_SERIAL_8250_SHARE_IRQ=y ++CONFIG_SERIAL_AMBA_PL011=y ++CONFIG_SERIAL_AMBA_PL011_CONSOLE=y + CONFIG_SERIAL_OF_PLATFORM=y + CONFIG_SERIAL_FSL_LPUART=y + CONFIG_SERIAL_FSL_LPUART_CONSOLE=y +@@ -170,6 +176,7 @@ CONFIG_RTC_CLASS=y + CONFIG_RTC_DRV_DS3232=y + CONFIG_DMADEVICES=y + CONFIG_FSL_EDMA=y ++CONFIG_VIRTIO_PCI=y + CONFIG_STAGING=y + CONFIG_CLK_QORIQ=y + # CONFIG_IOMMU_SUPPORT is not set +@@ -191,6 +198,7 @@ CONFIG_VFAT_FS=y + CONFIG_NTFS_FS=m + CONFIG_TMPFS=y + CONFIG_TMPFS_POSIX_ACL=y ++CONFIG_HUGETLBFS=y + CONFIG_CONFIGFS_FS=y + CONFIG_JFFS2_FS=y + CONFIG_NFS_FS=y +@@ -221,3 +229,5 @@ CONFIG_CRC_CCITT=m + CONFIG_CRC_T10DIF=y + CONFIG_CRC7=m + CONFIG_LIBCRC32C=m ++CONFIG_VIRTUALIZATION=y ++CONFIG_KVM=y diff --git a/target/linux/layerscape/patches-4.4/2124-armv8-aarch32-defconfig-Enable-FTM-alarm-support.patch b/target/linux/layerscape/patches-4.4/2124-armv8-aarch32-defconfig-Enable-FTM-alarm-support.patch new file mode 100644 index 0000000000..ae05a88677 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/2124-armv8-aarch32-defconfig-Enable-FTM-alarm-support.patch @@ -0,0 +1,23 @@ +From 6df7fdf7e0c76df7acc2d1a3a287bf094a94c4ff Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 13:55:44 +0800 +Subject: [PATCH 124/124] armv8: aarch32: defconfig: Enable FTM alarm support + +This patch is to enable FTM alarm support. + +Signed-off-by: Alison Wang +--- + arch/arm/configs/ls_aarch32_defconfig | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm/configs/ls_aarch32_defconfig ++++ b/arch/arm/configs/ls_aarch32_defconfig +@@ -181,6 +181,8 @@ CONFIG_STAGING=y + CONFIG_CLK_QORIQ=y + # CONFIG_IOMMU_SUPPORT is not set + CONFIG_MEMORY=y ++CONFIG_LS_SOC_DRIVERS=y ++CONFIG_FTM_ALARM=y + CONFIG_PWM=y + CONFIG_PWM_FSL_FTM=y + # CONFIG_RESET_CONTROLLER is not set diff --git a/target/linux/layerscape/patches-4.4/3071-arm64-dts-add-device-tree-for-ls1012a-SoC-and-boards.patch b/target/linux/layerscape/patches-4.4/3071-arm64-dts-add-device-tree-for-ls1012a-SoC-and-boards.patch new file mode 100644 index 0000000000..10c11eb07f --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3071-arm64-dts-add-device-tree-for-ls1012a-SoC-and-boards.patch @@ -0,0 +1,880 @@ +From 70e0080366e76dabf90b713f57fb9fc47aa35557 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Thu, 11 Aug 2016 10:36:05 +0800 +Subject: [PATCH 071/113] arm64: dts: add device tree for ls1012a SoC and + boards +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This patch is to add device tree for ls1012a SoC and RDB/FREEDOM boards. + +Signed-off-by: Pratiyush Mohan Srivastava +Signed-off-by: Prabhakar Kushwaha +Signed-off-by: Yunhui Cui +Signed-off-by: Rajesh Bhagat +Signed-off-by: Alison Wang +Signed-off-by: Horia Geantă +Signed-off-by: Bhaskar Upadhaya +Signed-off-by: Tang Yuantian +Signed-off-by: Chenhui Zhao +Signed-off-by: Jia Hongtao +Signed-off-by: Calvin Johnson +[yangbolu: integrate] +Signed-off-by: Yangbo Lu +--- + arch/arm64/boot/dts/freescale/Makefile | 2 + + arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts | 186 +++++++ + arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts | 114 +++++ + arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 526 ++++++++++++++++++++ + 4 files changed, 828 insertions(+) + create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts + create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts + create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi + +--- a/arch/arm64/boot/dts/freescale/Makefile ++++ b/arch/arm64/boot/dts/freescale/Makefile +@@ -2,6 +2,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2 + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb + dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb ++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb + + always := $(dtb-y) + subdir-y := $(dts-dirs) +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +@@ -0,0 +1,186 @@ ++/* ++ * Device Tree Include file for Freescale Layerscape-1012A family SoC. ++ * ++ * Copyright 2016, Freescale Semiconductor Inc. ++ ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++/dts-v1/; ++ ++#include "fsl-ls1012a.dtsi" ++ ++/ { ++ model = "LS1012A FREEDOM Board"; ++ compatible = "fsl,ls1012a-frdm", "fsl,ls1012a"; ++ ++ aliases { ++ crypto = &crypto; ++ }; ++ ++ sys_mclk: clock-mclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <25000000>; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ reg_1p8v: regulator@0 { ++ compatible = "regulator-fixed"; ++ reg = <0>; ++ regulator-name = "1P8V"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ }; ++ ++ sound { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,widgets = ++ "Microphone", "Microphone Jack", ++ "Headphone", "Headphone Jack", ++ "Speaker", "Speaker Ext", ++ "Line", "Line In Jack"; ++ simple-audio-card,routing = ++ "MIC_IN", "Microphone Jack", ++ "Microphone Jack", "Mic Bias", ++ "LINE_IN", "Line In Jack", ++ "Headphone Jack", "HP_OUT", ++ "Speaker Ext", "LINE_OUT"; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&sai2>; ++ frame-master; ++ bitclock-master; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&codec>; ++ frame-master; ++ bitclock-master; ++ system-clock-frequency = <25000000>; ++ }; ++ }; ++}; ++ ++&qspi { ++ num-cs = <2>; ++ bus-num = <0>; ++ status = "okay"; ++ fsl,ddr-sampling-point = <4>; ++ ++ qflash0: s25fs512s@0 { ++ compatible = "spansion,m25p80"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <20000000>; ++ m25p,fast-read; ++ reg = <0>; ++ }; ++}; ++&ftm0 { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++ ++ codec: sgtl5000@a { ++ #sound-dai-cells = <0>; ++ compatible = "fsl,sgtl5000"; ++ reg = <0xa>; ++ VDDA-supply = <®_1p8v>; ++ VDDIO-supply = <®_1p8v>; ++ clocks = <&sys_mclk 1>; ++ }; ++}; ++ ++&duart0 { ++ status = "okay"; ++}; ++&pfe { ++ status = "okay"; ++ ethernet@0 { ++ compatible = "fsl,pfe-gemac-port"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = < 0x0 >; /* GEM_ID */ ++ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ ++ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ ++ fsl,mdio-mux-val = <0x0>; ++ local-mac-address = [ 00 1A 2B 3C 4D 5E ]; ++ phy-mode = "sgmii"; ++ fsl,pfe-gemac-if-name = "eth0"; ++ fsl,pfe-phy-if-flags = <0x0>; ++ fsl,pfe-gemac-mode = <0x1B00>; /* GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_1G */ ++ ++ mdio@0 { ++ reg = <0x1>; /* enabled/disabled */ ++ fsl,mdio-phy-mask = <0xFFFFFFF9>; ++ }; ++ }; ++ ethernet@1 { ++ compatible = "fsl,pfe-gemac-port"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = < 0x1 >; /* GEM_ID */ ++ fsl,gemac-bus-id = < 0x1 >; /* BUS_ID */ ++ fsl,gemac-phy-id = < 0x1 >; /* PHY_ID */ ++ fsl,mdio-mux-val = <0x0>; ++ local-mac-address = [ 00 AA BB CC DD EE ]; ++ phy-mode = "sgmii"; ++ fsl,pfe-gemac-if-name = "eth1"; ++ fsl,pfe-phy-if-flags = <0x0>; ++ fsl,pfe-gemac-mode = <0x1B00>; /* GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_1G */ ++ mdio@0 { ++ reg = <0x0>; /* enabled/disabled */ ++ fsl,mdio-phy-mask = <0xFFFFFFF9>; ++ }; ++ ++ }; ++ ++}; ++ ++ ++&esdhc0 { ++ status = "disabled"; ++}; ++ ++&esdhc1 { ++ status = "disabled"; ++}; ++ ++&sai2 { ++ status = "okay"; ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +@@ -0,0 +1,114 @@ ++/* ++ * Device Tree Include file for Freescale Layerscape-1012A family SoC. ++ * ++ * Copyright 2016, Freescale Semiconductor Inc. ++ ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions are met: ++ * * Redistributions of source code must retain the above copyright ++ * notice, this list of conditions and the following disclaimer. ++ * * Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * * Neither the name of Freescale Semiconductor nor the ++ * names of its contributors may be used to endorse or promote products ++ * derived from this software without specific prior written permission. ++ * ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY ++ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED ++ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE ++ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY ++ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; ++ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ++ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++/dts-v1/; ++ ++#include "fsl-ls1012a.dtsi" ++ ++/ { ++ model = "LS1012A RDB Board"; ++ compatible = "fsl,ls1012a-rdb", "fsl,ls1012a"; ++ ++ aliases { ++ crypto = &crypto; ++ }; ++}; ++ ++&qspi { ++ num-cs = <2>; ++ bus-num = <0>; ++ status = "okay"; ++ fsl,ddr-sampling-point = <4>; ++ ++ qflash0: s25fs512s@0 { ++ compatible = "spansion,m25p80"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ spi-max-frequency = <20000000>; ++ m25p,fast-read; ++ reg = <0>; ++ }; ++}; ++&ftm0 { ++ status = "okay"; ++}; ++ ++&i2c0 { ++ status = "okay"; ++}; ++ ++&duart0 { ++ status = "okay"; ++}; ++&pfe { ++ status = "okay"; ++ ethernet@0 { ++ compatible = "fsl,pfe-gemac-port"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = < 0x0 >; /* GEM_ID */ ++ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ ++ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ ++ fsl,mdio-mux-val = <0x0>; ++ local-mac-address = [ 00 1A 2B 3C 4D 5E ]; ++ phy-mode = "sgmii"; ++ fsl,pfe-gemac-if-name = "eth0"; ++ fsl,pfe-phy-if-flags = <0x0>; ++ fsl,pfe-gemac-mode = <0x1B00>; /* GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_1G */ ++ ++ mdio@0 { ++ reg = <0x1>; /* enabled/disabled */ ++ fsl,mdio-phy-mask = <0xFFFFFFF9>; ++ }; ++ }; ++ ethernet@1 { ++ compatible = "fsl,pfe-gemac-port"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = < 0x1 >; /* GEM_ID */ ++ fsl,gemac-bus-id = < 0x1 >; /* BUS_ID */ ++ fsl,gemac-phy-id = < 0x1 >; /* PHY_ID */ ++ fsl,mdio-mux-val = <0x0>; ++ local-mac-address = [ 00 AA BB CC DD EE ]; ++ phy-mode = "rgmii"; ++ fsl,pfe-gemac-if-name = "eth2"; ++ fsl,pfe-phy-if-flags = <0x0>; ++ fsl,pfe-gemac-mode = <0x1B00>; /* GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_1G */ ++ mdio@0 { ++ reg = <0x0>; /* enabled/disabled */ ++ fsl,mdio-phy-mask = <0xFFFFFFF9>; ++ }; ++ ++ }; ++ ++}; +--- /dev/null ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +@@ -0,0 +1,526 @@ ++/* ++ * Device Tree Include file for Freescale Layerscape-1043A family SoC. ++ * ++ * Copyright 2016, Freescale Semiconductor ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPLv2 or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++#include ++ ++/ { ++ compatible = "fsl,ls1012a"; ++ interrupt-parent = <&gic>; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ++ cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ /* ++ * We expect the enable-method for cpu's to be "psci", but this ++ * is dependent on the SoC FW, which will fill this in. ++ * ++ * Currently supported enable-method is psci v0.2 ++ */ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0x0>; ++ clocks = <&clockgen 1 0>; ++ #cooling-cells = <2>; ++ }; ++ ++ }; ++ ++ ++ sysclk: sysclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <100000000>; ++ clock-output-names = "sysclk"; ++ }; ++ ++ timer { ++ compatible = "arm,armv8-timer"; ++ interrupts = <1 13 0x1>, /* Physical Secure PPI */ ++ <1 14 0x1>, /* Physical Non-Secure PPI */ ++ <1 11 0x1>, /* Virtual PPI */ ++ <1 10 0x1>; /* Hypervisor PPI */ ++ arm,reread-timer; ++ }; ++ ++ pmu { ++ compatible = "arm,armv8-pmuv3"; ++ interrupts = <0 106 0x4>; ++ }; ++ ++ gic: interrupt-controller@1400000 { ++ compatible = "arm,gic-400"; ++ #interrupt-cells = <3>; ++ interrupt-controller; ++ reg = <0x0 0x1401000 0 0x1000>, /* GICD */ ++ <0x0 0x1402000 0 0x2000>, /* GICC */ ++ <0x0 0x1404000 0 0x2000>, /* GICH */ ++ <0x0 0x1406000 0 0x2000>; /* GICV */ ++ interrupts = <1 9 0xf08>; ++ }; ++ ++ soc { ++ compatible = "simple-bus"; ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ clockgen: clocking@1ee1000 { ++ compatible = "fsl,ls1012a-clockgen"; ++ reg = <0x0 0x1ee1000 0x0 0x1000>; ++ #clock-cells = <2>; ++ clocks = <&sysclk>; ++ }; ++ ++ scfg: scfg@1570000 { ++ compatible = "fsl,ls1012a-scfg", ++ "fsl,ls1043a-scfg", ++ "syscon"; ++ reg = <0x0 0x1570000 0x0 0x10000>; ++ big-endian; ++ }; ++ ++ crypto: crypto@1700000 { ++ compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", ++ "fsl,sec-v4.0"; ++ fsl,sec-era = <8>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges = <0x0 0x00 0x1700000 0x100000>; ++ reg = <0x00 0x1700000 0x0 0x100000>; ++ interrupts = <0 75 0x4>; ++ ++ sec_jr0: jr@10000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x10000 0x10000>; ++ interrupts = <0 71 0x4>; ++ }; ++ ++ sec_jr1: jr@20000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x20000 0x10000>; ++ interrupts = <0 72 0x4>; ++ }; ++ ++ sec_jr2: jr@30000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x30000 0x10000>; ++ interrupts = <0 73 0x4>; ++ }; ++ ++ sec_jr3: jr@40000 { ++ compatible = "fsl,sec-v5.4-job-ring", ++ "fsl,sec-v5.0-job-ring", ++ "fsl,sec-v4.0-job-ring"; ++ reg = <0x40000 0x10000>; ++ interrupts = <0 74 0x4>; ++ }; ++ }; ++ ++ ++ dcfg: dcfg@1ee0000 { ++ compatible = "fsl,ls1012a-dcfg", ++ "fsl,ls1043a-dcfg", ++ "syscon"; ++ reg = <0x0 0x1ee0000 0x0 0x10000>; ++ }; ++ ++ reset: reset@1EE00B0 { ++ compatible = "fsl,ls-reset"; ++ reg = <0x0 0x1EE00B0 0x0 0x4>; ++ big-endian; ++ }; ++ ++ rcpm: rcpm@1ee2000 { ++ compatible = "fsl,ls1012a-rcpm", ++ "fsl,ls1043a-rcpm", ++ "fsl,qoriq-rcpm-2.1"; ++ reg = <0x0 0x1ee2000 0x0 0x10000>; ++ }; ++ ++ ftm0: ftm0@29d0000 { ++ compatible = "fsl,ftm-alarm"; ++ reg = <0x0 0x29d0000 0x0 0x10000>; ++ interrupts = <0 86 0x4>; ++ big-endian; ++ rcpm-wakeup = <&rcpm 0x00020000 0x0>; ++ status = "okay"; ++ }; ++ ++ esdhc0: esdhc@1560000 { ++ compatible = "fsl,ls1012a-esdhc0", "fsl,esdhc"; ++ reg = <0x0 0x1560000 0x0 0x10000>; ++ interrupts = <0 62 0x4>; ++ clock-frequency = <0>; ++ voltage-ranges = <1800 1800 3300 3300>; ++ sdhci,auto-cmd12; ++ big-endian; ++ bus-width = <4>; ++ }; ++ ++ esdhc1: esdhc@1580000 { ++ compatible = "fsl,ls1012a-esdhc1", "fsl,esdhc"; ++ reg = <0x0 0x1580000 0x0 0x10000>; ++ interrupts = <0 65 0x4>; ++ clock-frequency = <0>; ++ voltage-ranges = <1800 1800 3300 3300>; ++ sdhci,auto-cmd12; ++ big-endian; ++ bus-width = <4>; ++ }; ++ ++ dspi0: dspi@2100000 { ++ compatible = "fsl,ls1012a-dspi", ++ "fsl,ls1043a-dspi", ++ "fsl,ls1021a-v1.0-dspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2100000 0x0 0x10000>; ++ interrupts = <0 64 0x4>; ++ clock-names = "dspi"; ++ clocks = <&clockgen 4 0>; ++ spi-num-chipselects = <5>; ++ big-endian; ++ status = "enabled"; ++ }; ++ ++ qspi: quadspi@1550000 { ++ compatible = "fsl,ls1012a-qspi", ++ "fsl,ls1043a-qspi", ++ "fsl,ls1021a-qspi"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x1550000 0x0 0x10000>, ++ <0x0 0x40000000 0x0 0x4000000>; ++ reg-names = "QuadSPI", "QuadSPI-memory"; ++ interrupts = <0 99 0x4>; ++ clock-names = "qspi_en", "qspi"; ++ clocks = <&clockgen 4 0>, <&clockgen 4 0>; ++ big-endian; ++ amba-base = <0x42000000>; ++ }; ++ ++ tmu: tmu@1f00000 { ++ compatible = "fsl,qoriq-tmu", "fsl,ls1012a-tmu"; ++ reg = <0x0 0x1f00000 0x0 0x10000>; ++ interrupts = <0 33 0x4>; ++ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; ++ fsl,tmu-calibration = <0x00000000 0x00000026 ++ 0x00000001 0x0000002d ++ 0x00000002 0x00000032 ++ 0x00000003 0x00000039 ++ 0x00000004 0x0000003f ++ 0x00000005 0x00000046 ++ 0x00000006 0x0000004d ++ 0x00000007 0x00000054 ++ 0x00000008 0x0000005a ++ 0x00000009 0x00000061 ++ 0x0000000a 0x0000006a ++ 0x0000000b 0x00000071 ++ ++ 0x00010000 0x00000025 ++ 0x00010001 0x0000002c ++ 0x00010002 0x00000035 ++ 0x00010003 0x0000003d ++ 0x00010004 0x00000045 ++ 0x00010005 0x0000004e ++ 0x00010006 0x00000057 ++ 0x00010007 0x00000061 ++ 0x00010008 0x0000006b ++ 0x00010009 0x00000076 ++ ++ 0x00020000 0x00000029 ++ 0x00020001 0x00000033 ++ 0x00020002 0x0000003d ++ 0x00020003 0x00000049 ++ 0x00020004 0x00000056 ++ 0x00020005 0x00000061 ++ 0x00020006 0x0000006d ++ ++ 0x00030000 0x00000021 ++ 0x00030001 0x0000002a ++ 0x00030002 0x0000003c ++ 0x00030003 0x0000004e>; ++ big-endian; ++ #thermal-sensor-cells = <1>; ++ }; ++ ++ thermal-zones { ++ cpu_thermal: cpu-thermal { ++ polling-delay-passive = <1000>; ++ polling-delay = <5000>; ++ ++ thermal-sensors = <&tmu 0>; ++ ++ trips { ++ cpu_alert: cpu-alert { ++ temperature = <85000>; ++ hysteresis = <2000>; ++ type = "passive"; ++ }; ++ cpu_crit: cpu-crit { ++ temperature = <95000>; ++ hysteresis = <2000>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ map0 { ++ trip = <&cpu_alert>; ++ cooling-device = ++ <&cpu0 THERMAL_NO_LIMIT ++ THERMAL_NO_LIMIT>; ++ }; ++ }; ++ }; ++ }; ++ ++ i2c0: i2c@2180000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2180000 0x0 0x10000>; ++ interrupts = <0 56 0x4>; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 0>; ++ status = "disabled"; ++ }; ++ ++ i2c1: i2c@2190000 { ++ compatible = "fsl,vf610-i2c"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0 0x2190000 0x0 0x10000>; ++ interrupts = <0 57 0x4>; ++ clock-names = "i2c"; ++ clocks = <&clockgen 4 0>; ++ status = "disabled"; ++ }; ++ ++ ++ duart0: serial@21c0500 { ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x00 0x21c0500 0x0 0x100>; ++ interrupts = <0 54 0x4>; ++ clocks = <&clockgen 4 0>; ++ }; ++ ++ duart1: serial@21c0600 { ++ compatible = "fsl,ns16550", "ns16550a"; ++ reg = <0x00 0x21c0600 0x0 0x100>; ++ interrupts = <0 54 0x4>; ++ clocks = <&clockgen 4 0>; ++ }; ++ ++ gpio0: gpio@2300000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2300000 0x0 0x10000>; ++ interrupts = <0 66 0x4>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ gpio1: gpio@2310000 { ++ compatible = "fsl,qoriq-gpio"; ++ reg = <0x0 0x2310000 0x0 0x10000>; ++ interrupts = <0 67 0x4>; ++ gpio-controller; ++ #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; ++ }; ++ ++ wdog0: wdog@2ad0000 { ++ compatible = "fsl,ls1012a-wdt", ++ "fsl,ls1043a-wdt", ++ "fsl,imx21-wdt"; ++ reg = <0x0 0x2ad0000 0x0 0x10000>; ++ interrupts = <0 83 0x4>; ++ clocks = <&clockgen 4 0>; ++ clock-names = "wdog"; ++ big-endian; ++ }; ++ ++ sai1: sai@2b50000 { ++ #sound-dai-cells = <0>; ++ compatible = "fsl,vf610-sai"; ++ reg = <0x0 0x2b50000 0x0 0x10000>; ++ interrupts = <0 148 0x4>; ++ clocks = <&clockgen 4 3>, <&clockgen 4 3>, ++ <&clockgen 4 3>, <&clockgen 4 3>; ++ clock-names = "bus", "mclk1", "mclk2", "mclk3"; ++ dma-names = "tx", "rx"; ++ dmas = <&edma0 1 47>, ++ <&edma0 1 46>; ++ status = "disabled"; ++ }; ++ ++ sai2: sai@2b60000 { ++ #sound-dai-cells = <0>; ++ compatible = "fsl,vf610-sai"; ++ reg = <0x0 0x2b60000 0x0 0x10000>; ++ interrupts = <0 149 0x4>; ++ clocks = <&clockgen 4 3>, <&clockgen 4 3>, ++ <&clockgen 4 3>, <&clockgen 4 3>; ++ clock-names = "bus", "mclk1", "mclk2", "mclk3"; ++ dma-names = "tx", "rx"; ++ dmas = <&edma0 1 45>, ++ <&edma0 1 44>; ++ status = "disabled"; ++ }; ++ ++ edma0: edma@2c00000 { ++ #dma-cells = <2>; ++ compatible = "fsl,vf610-edma"; ++ reg = <0x0 0x2c00000 0x0 0x10000>, ++ <0x0 0x2c10000 0x0 0x10000>, ++ <0x0 0x2c20000 0x0 0x10000>; ++ interrupts = <0 103 0x4>, ++ <0 103 0x4>; ++ interrupt-names = "edma-tx", "edma-err"; ++ dma-channels = <32>; ++ big-endian; ++ clock-names = "dmamux0", "dmamux1"; ++ clocks = <&clockgen 4 3>, ++ <&clockgen 4 3>; ++ }; ++ ++ sata: sata@3200000 { ++ compatible = "fsl,ls1012a-ahci"; ++ reg = <0x0 0x3200000 0x0 0x10000>; ++ interrupts = <0 69 0x4>; ++ clocks = <&clockgen 4 0>; ++ }; ++ ++ msi2: msi-controller2@1572000 { ++ compatible ="fsl,1s1012a-msi", "fsl,1s1021a-msi"; ++ reg = <0x0 0x1572000 0x0 0x4>, ++ <0x0 0x1572004 0x0 0x4>; ++ reg-names = "msiir", "msir"; ++ msi-controller; ++ interrupts = <0 126 0x4>; ++ }; ++ ++ usb@8600000 { ++ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; ++ reg = <0x0 0x8600000 0x0 0x1000>; ++ interrupts = <0 139 0x4>; ++ dr_mode = "host"; ++ phy_type = "ulpi"; ++ fsl,usb-erratum-a005697; ++ }; ++ ++ usb0: usb3@2f00000 { ++ compatible = "snps,dwc3"; ++ reg = <0x0 0x2f00000 0x0 0x10000>; ++ interrupts = <0 60 0x4>; ++ dr_mode = "host"; ++ configure-gfladj; ++ snps,dis_rxdet_inp3_quirk; ++ }; ++ ++ pcie@3400000 { ++ compatible = "fsl,ls1012a-pcie", ++ "fsl,ls1043a-pcie", ++ "snps,dw-pcie"; ++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ ++ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ ++ reg-names = "regs", "config"; ++ interrupts = <0 118 0x4>, /* controller interrupt */ ++ <0 117 0x4>; /* PME interrupt */ ++ interrupt-names = "intr", "pme"; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ device_type = "pci"; ++ num-lanes = <4>; ++ bus-range = <0x0 0xff>; ++ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */ ++ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ ++ msi-parent = <&msi2>; ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0 0 0 7>; ++ interrupt-map = <0000 0 0 1 &gic 0 110 0x4>, ++ <0000 0 0 2 &gic 0 111 0x4>, ++ <0000 0 0 3 &gic 0 112 0x4>, ++ <0000 0 0 4 &gic 0 113 0x4>; ++ }; ++ }; ++ reserved-memory { ++ #address-cells = <2>; ++ #size-cells = <2>; ++ ranges; ++ ++ pfe_reserved: packetbuffer@83400000 { ++ reg = <0 0x83400000 0 0xc00000>; ++ }; ++ }; ++ ++ pfe: pfe@04000000 { ++ compatible = "fsl,pfe"; ++ ranges = <0x0 0x00 0x04000000 0xc00000 ++ 0x1 0x00 0x83400000 0xc00000>; ++ reg = <0x0 0x90500000 0x0 0x10000>, /* APB 64K */ ++ <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */ ++ <0x0 0x83400000 0x0 0xc00000>, /* PFE DDR 12M */ ++ <0x0 0x10000000 0x0 0x2000>; /* OCRAM 8K */ ++ fsl,pfe-num-interfaces = < 0x2 >; ++ interrupts = <0 172 0x4>; ++ #interrupt-names = "hifirq"; ++ memory-region = <&pfe_reserved>; ++ fsl,pfe-scfg = <&scfg 0>; ++ }; ++ ++}; diff --git a/target/linux/layerscape/patches-4.4/3117-armv8-aarch32-Run-32-bit-Linux-for-LayerScape-SoCs.patch b/target/linux/layerscape/patches-4.4/3117-armv8-aarch32-Run-32-bit-Linux-for-LayerScape-SoCs.patch new file mode 100644 index 0000000000..9b580b4730 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3117-armv8-aarch32-Run-32-bit-Linux-for-LayerScape-SoCs.patch @@ -0,0 +1,49 @@ +From f6dcf8936845ea95eba432ee725cec761032fe2a Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 10:12:29 +0800 +Subject: [PATCH 117/124] armv8: aarch32: Run 32-bit Linux for LayerScape SoCs + +This patch adds AArch32 execution state support for LayerScape SoCs. + +Signed-off-by: Ebony Zhu +Signed-off-by: Alison Wang +--- + arch/arm/mach-imx/Makefile | 2 ++ + arch/arm/mach-imx/mach-layerscape.c | 22 ++++++++++++++++++++++ + 2 files changed, 24 insertions(+) + create mode 100644 arch/arm/mach-imx/mach-layerscape.c + +--- a/arch/arm/mach-imx/Makefile ++++ b/arch/arm/mach-imx/Makefile +@@ -103,4 +103,6 @@ obj-$(CONFIG_SOC_LS1021A) += mach-ls1021 + + obj-$(CONFIG_ARCH_LAYERSCAPE) += mach-ls1043a.o + ++obj-$(CONFIG_ARCH_LAYERSCAPE) += mach-layerscape.o ++ + obj-y += devices/ +--- /dev/null ++++ b/arch/arm/mach-imx/mach-layerscape.c +@@ -0,0 +1,22 @@ ++/* ++ * Copyright 2015-2016 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#include ++ ++#include "common.h" ++ ++static const char * const layerscape_dt_compat[] __initconst = { ++ "fsl,ls1043a", ++ "fsl,ls1012a", ++ NULL, ++}; ++ ++DT_MACHINE_START(LAYERSCAPE, "Freescale LAYERSCAPE") ++ .dt_compat = layerscape_dt_compat, ++MACHINE_END diff --git a/target/linux/layerscape/patches-4.4/3118-armv8-aarch32-Add-KVM-support-for-AArch32-on-ARMv8.patch b/target/linux/layerscape/patches-4.4/3118-armv8-aarch32-Add-KVM-support-for-AArch32-on-ARMv8.patch new file mode 100644 index 0000000000..32ebc36b1f --- /dev/null +++ b/target/linux/layerscape/patches-4.4/3118-armv8-aarch32-Add-KVM-support-for-AArch32-on-ARMv8.patch @@ -0,0 +1,34 @@ +From 44914d3b7baff0f96c3584e4d46aa992e402ef4f Mon Sep 17 00:00:00 2001 +From: Ying Zhang +Date: Thu, 29 Sep 2016 11:16:16 +0800 +Subject: [PATCH 118/124] armv8: aarch32: Add KVM support for AArch32 on ARMv8 + +This patch is to add KVM support for AArch32 execution state on ARMv8. + +Signed-off-by: Alison Wang +--- + arch/arm/include/asm/cputype.h | 2 ++ + arch/arm/kvm/guest.c | 1 + + 2 files changed, 3 insertions(+) + +--- a/arch/arm/include/asm/cputype.h ++++ b/arch/arm/include/asm/cputype.h +@@ -76,6 +76,8 @@ + #define ARM_CPU_PART_CORTEX_A15 0x4100c0f0 + #define ARM_CPU_PART_MASK 0xff00fff0 + ++#define ARM_CPU_PART_CORTEX_AARCH32_A53 0x4100d030 ++ + #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 + #define ARM_CPU_XSCALE_ARCH_V1 0x2000 + #define ARM_CPU_XSCALE_ARCH_V2 0x4000 +--- a/arch/arm/kvm/guest.c ++++ b/arch/arm/kvm/guest.c +@@ -247,6 +247,7 @@ int __attribute_const__ kvm_target_cpu(v + { + switch (read_cpuid_part()) { + case ARM_CPU_PART_CORTEX_A7: ++ case ARM_CPU_PART_CORTEX_AARCH32_A53: + return KVM_ARM_TARGET_CORTEX_A7; + case ARM_CPU_PART_CORTEX_A15: + return KVM_ARM_TARGET_CORTEX_A15; diff --git a/target/linux/layerscape/patches-4.4/7072-LS1012-Add-PPFE-driver-in-Linux.patch b/target/linux/layerscape/patches-4.4/7072-LS1012-Add-PPFE-driver-in-Linux.patch new file mode 100644 index 0000000000..21339e819e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/7072-LS1012-Add-PPFE-driver-in-Linux.patch @@ -0,0 +1,15167 @@ +From 0157efe2fbe2fe56c34727d326cd74284c06cbd5 Mon Sep 17 00:00:00 2001 +From: Bhaskar Upadhaya +Date: Wed, 24 Aug 2016 10:51:21 +0800 +Subject: [PATCH 072/113] LS1012: Add PPFE driver in Linux + +commit 7584b690d4c8e4e435c2e6abcdb38d6595a0c302 +[context adjustment] +[don't apply fsl-ls1012a-rdb.dts and fsl-ls1012a.dtsi] +[Let PPFE driver can be selectd as a module] + +Signed-off-by: Bhaskar Upadhaya +Integrated-by: Zhao Qiang +Integrated-by: Yutang Jiang +--- + drivers/staging/Kconfig | 2 + + drivers/staging/Makefile | 1 + + drivers/staging/fsl_ppfe/Kconfig | 5 + + drivers/staging/fsl_ppfe/Makefile | 44 + + drivers/staging/fsl_ppfe/config.h | 8 + + drivers/staging/fsl_ppfe/control_link.lds | 32 + + drivers/staging/fsl_ppfe/include/pfe/cbus.h | 88 + + drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h | 55 + + .../staging/fsl_ppfe/include/pfe/cbus/class_csr.h | 242 ++ + drivers/staging/fsl_ppfe/include/pfe/cbus/emac.h | 243 ++ + .../staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h | 250 ++ + drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h | 78 + + drivers/staging/fsl_ppfe/include/pfe/cbus/gpt.h | 29 + + drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h | 96 + + .../staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h | 51 + + .../staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h | 128 + + .../staging/fsl_ppfe/include/pfe/cbus/util_csr.h | 61 + + drivers/staging/fsl_ppfe/include/pfe/class.h | 133 + + drivers/staging/fsl_ppfe/include/pfe/class/ccu.h | 28 + + drivers/staging/fsl_ppfe/include/pfe/class/efet.h | 44 + + .../staging/fsl_ppfe/include/pfe/class/mac_hash.h | 55 + + drivers/staging/fsl_ppfe/include/pfe/class/perg.h | 39 + + .../staging/fsl_ppfe/include/pfe/class/vlan_hash.h | 46 + + drivers/staging/fsl_ppfe/include/pfe/gpt.h | 44 + + drivers/staging/fsl_ppfe/include/pfe/pe.h | 626 +++++ + drivers/staging/fsl_ppfe/include/pfe/pfe.h | 444 +++ + drivers/staging/fsl_ppfe/include/pfe/tmu.h | 68 + + .../staging/fsl_ppfe/include/pfe/tmu/phy_queue.h | 56 + + drivers/staging/fsl_ppfe/include/pfe/tmu/sched.h | 72 + + drivers/staging/fsl_ppfe/include/pfe/tmu/shaper.h | 37 + + drivers/staging/fsl_ppfe/include/pfe/uart.h | 31 + + drivers/staging/fsl_ppfe/include/pfe/util.h | 49 + + drivers/staging/fsl_ppfe/include/pfe/util/eape.h | 57 + + drivers/staging/fsl_ppfe/include/pfe/util/efet.h | 119 + + drivers/staging/fsl_ppfe/include/pfe/util/inq.h | 28 + + drivers/staging/fsl_ppfe/pfe_ctrl.c | 363 +++ + drivers/staging/fsl_ppfe/pfe_ctrl.h | 111 + + drivers/staging/fsl_ppfe/pfe_ctrl_hal.c | 207 ++ + drivers/staging/fsl_ppfe/pfe_ctrl_hal.h | 129 + + drivers/staging/fsl_ppfe/pfe_debugfs.c | 109 + + drivers/staging/fsl_ppfe/pfe_debugfs.h | 8 + + drivers/staging/fsl_ppfe/pfe_eth.c | 2956 ++++++++++++++++++++ + drivers/staging/fsl_ppfe/pfe_eth.h | 384 +++ + drivers/staging/fsl_ppfe/pfe_firmware.c | 322 +++ + drivers/staging/fsl_ppfe/pfe_firmware.h | 41 + + drivers/staging/fsl_ppfe/pfe_hal.c | 2217 +++++++++++++++ + drivers/staging/fsl_ppfe/pfe_hif.c | 939 +++++++ + drivers/staging/fsl_ppfe/pfe_hif.h | 322 +++ + drivers/staging/fsl_ppfe/pfe_hif_lib.c | 658 +++++ + drivers/staging/fsl_ppfe/pfe_hif_lib.h | 219 ++ + drivers/staging/fsl_ppfe/pfe_hw.c | 188 ++ + drivers/staging/fsl_ppfe/pfe_hw.h | 32 + + drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c | 341 +++ + drivers/staging/fsl_ppfe/pfe_mod.c | 140 + + drivers/staging/fsl_ppfe/pfe_mod.h | 163 ++ + drivers/staging/fsl_ppfe/pfe_perfmon.c | 175 ++ + drivers/staging/fsl_ppfe/pfe_perfmon.h | 41 + + drivers/staging/fsl_ppfe/pfe_platform.c | 358 +++ + drivers/staging/fsl_ppfe/pfe_sysfs.c | 855 ++++++ + drivers/staging/fsl_ppfe/pfe_sysfs.h | 34 + + drivers/staging/fsl_ppfe/platform.h | 25 + + include/linux/skbuff.h | 11 + + net/core/skbuff.c | 84 + + 63 files changed, 14821 insertions(+) + create mode 100644 drivers/staging/fsl_ppfe/Kconfig + create mode 100644 drivers/staging/fsl_ppfe/Makefile + create mode 100644 drivers/staging/fsl_ppfe/config.h + create mode 100644 drivers/staging/fsl_ppfe/control_link.lds + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/emac.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/gpt.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/class.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/class/ccu.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/class/efet.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/class/mac_hash.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/class/perg.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/class/vlan_hash.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/gpt.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/pe.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/pfe.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/tmu.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/tmu/phy_queue.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/tmu/sched.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/tmu/shaper.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/uart.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/util.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/util/eape.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/util/efet.h + create mode 100644 drivers/staging/fsl_ppfe/include/pfe/util/inq.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl_hal.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl_hal.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_hal.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_perfmon.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_perfmon.h + create mode 100644 drivers/staging/fsl_ppfe/pfe_platform.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.c + create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.h + create mode 100644 drivers/staging/fsl_ppfe/platform.h + +--- a/drivers/staging/Kconfig ++++ b/drivers/staging/Kconfig +@@ -112,4 +112,6 @@ source "drivers/staging/wilc1000/Kconfig + + source "drivers/staging/most/Kconfig" + ++source "drivers/staging/fsl_ppfe/Kconfig" ++ + endif # STAGING +--- a/drivers/staging/Makefile ++++ b/drivers/staging/Makefile +@@ -48,3 +48,4 @@ obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/ + obj-$(CONFIG_FSL_DPA) += fsl_qbman/ + obj-$(CONFIG_WILC1000) += wilc1000/ + obj-$(CONFIG_MOST) += most/ ++obj-$(CONFIG_FSL_PPFE) += fsl_ppfe/ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/Kconfig +@@ -0,0 +1,5 @@ ++config FSL_PPFE ++ tristate "Freescale PPFE Driver" ++ default m ++ help ++ only compiled as module ! +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/Makefile +@@ -0,0 +1,44 @@ ++# ++# Copyright (C) 2007 Freescale Semiconductor, Inc. ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ ++ ++all: modules ++ ++modules clean: ++ make CROSS_COMPILE=$(CROSS_COMPILE) ARCH=$(ARCH) -C $(KERNELDIR) M=`pwd` $@ ++ ++EXTRA_CFLAGS += -I$(src)/include -I$(src) -DCOMCERTO_2000 -DCONFIG_PLATFORM_LS1012A -DGEMAC_MTIP -DCONFIG_UTIL_DISABLED ++ ++EXTRA_LDFLAGS += -T$(srctree)/$(src)/control_link.lds ++ ++#only compiled as module ! ++obj-$(CONFIG_FSL_PPFE) += pfe.o ++ ++pfe-y += pfe_mod.o \ ++ pfe_hw.o \ ++ pfe_firmware.o \ ++ pfe_ctrl.o \ ++ pfe_ctrl_hal.o \ ++ pfe_hif.o \ ++ pfe_hif_lib.o\ ++ pfe_eth.o \ ++ pfe_perfmon.o \ ++ pfe_sysfs.o \ ++ pfe_debugfs.o \ ++ pfe_ls1012a_platform.o \ ++ pfe_hal.o \ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/config.h +@@ -0,0 +1,8 @@ ++#ifndef _CONFIG_H_ ++#define _CONFIG_H_ ++#define CFG_WIFI_OFFLOAD (1 << 1) ++#define CFG_ICC (1 << 11) ++#define CFG_RTP (1 << 14) ++#define CFG_ELLIPTIC (1 << 15) ++#define CFG_ALL (0 | CFG_WIFI_OFFLOAD | CFG_ICC | CFG_RTP | CFG_ELLIPTIC ) ++#endif /* _CONFIG_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/control_link.lds +@@ -0,0 +1,32 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++SECTIONS ++{ ++ .class_dmem_sh : SUBALIGN(8) { ++ __class_dmem_sh = .; ++ *(SORT(.class_dmem_sh_*)) ++ } ++ ++ .tmu_dmem_sh : SUBALIGN(8) { ++ __tmu_dmem_sh = .; ++ *(SORT(.tmu_dmem_sh_*)) ++ } ++ ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus.h +@@ -0,0 +1,88 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _CBUS_H_ ++#define _CBUS_H_ ++ ++#define EMAC1_BASE_ADDR (CBUS_BASE_ADDR + 0x200000) ++#define EGPI1_BASE_ADDR (CBUS_BASE_ADDR + 0x210000) ++#define EMAC2_BASE_ADDR (CBUS_BASE_ADDR + 0x220000) ++#define EGPI2_BASE_ADDR (CBUS_BASE_ADDR + 0x230000) ++#define BMU1_BASE_ADDR (CBUS_BASE_ADDR + 0x240000) ++#define BMU2_BASE_ADDR (CBUS_BASE_ADDR + 0x250000) ++#define ARB_BASE_ADDR (CBUS_BASE_ADDR + 0x260000) /* FIXME not documented */ ++#define DDR_CONFIG_BASE_ADDR (CBUS_BASE_ADDR + 0x270000) /* FIXME not documented */ ++#define HIF_BASE_ADDR (CBUS_BASE_ADDR + 0x280000) ++#define HGPI_BASE_ADDR (CBUS_BASE_ADDR + 0x290000) ++#define LMEM_BASE_ADDR (CBUS_BASE_ADDR + 0x300000) ++#define LMEM_SIZE 0x10000 ++#define LMEM_END (LMEM_BASE_ADDR + LMEM_SIZE) ++#define TMU_CSR_BASE_ADDR (CBUS_BASE_ADDR + 0x310000) ++#define CLASS_CSR_BASE_ADDR (CBUS_BASE_ADDR + 0x320000) ++#if defined(CONFIG_PLATFORM_C2000) ++#define EMAC3_BASE_ADDR (CBUS_BASE_ADDR + 0x330000) ++#define EGPI3_BASE_ADDR (CBUS_BASE_ADDR + 0x340000) ++#endif ++#define HIF_NOCPY_BASE_ADDR (CBUS_BASE_ADDR + 0x350000) ++#define UTIL_CSR_BASE_ADDR (CBUS_BASE_ADDR + 0x360000) ++#define CBUS_GPT_BASE_ADDR (CBUS_BASE_ADDR + 0x370000) ++ ++#define IS_LMEM(addr, len) (((unsigned long)(addr) >= (unsigned long)LMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= (unsigned long)LMEM_END)) ++ ++/** ++* \defgroup XXX_MEM_ACCESS_ADDR PE memory access through CSR ++* XXX_MEM_ACCESS_ADDR register bit definitions. ++* @{ ++*/ ++#define PE_MEM_ACCESS_WRITE (1<<31) /**< Internal Memory Write. */ ++#define PE_MEM_ACCESS_IMEM (1<<15) ++#define PE_MEM_ACCESS_DMEM (1<<16) ++#define PE_MEM_ACCESS_BYTE_ENABLE(offset,size) (((((1 << (size)) - 1) << (4 - (offset) - (size))) & 0xf) << 24) /**< Byte Enables of the Internal memory access. These are interpred in BE */ ++// @} ++#if defined(CONFIG_PLATFORM_LS1012A) ++#include "cbus/emac_mtip.h" ++#else ++#include "cbus/emac.h" ++#endif //CONFIG_PLATFORM_LS1012A ++#include "cbus/gpi.h" ++#include "cbus/bmu.h" ++#include "cbus/hif.h" ++#include "cbus/tmu_csr.h" ++#include "cbus/class_csr.h" ++#include "cbus/hif_nocpy.h" ++#include "cbus/util_csr.h" ++#include "cbus/gpt.h" ++ ++ ++/* PFE cores states */ ++#define CORE_DISABLE 0x00000000 ++#define CORE_ENABLE 0x00000001 ++#define CORE_SW_RESET 0x00000002 ++ ++/* LMEM defines */ ++#define LMEM_HDR_SIZE 0x0010 ++#define LMEM_BUF_SIZE_LN2 0x7 ++#define LMEM_BUF_SIZE (1 << LMEM_BUF_SIZE_LN2) ++ ++/* DDR defines */ ++#define DDR_HDR_SIZE 0x0100 ++#define DDR_BUF_SIZE_LN2 0xb ++#define DDR_BUF_SIZE (1 << DDR_BUF_SIZE_LN2) ++ ++ ++#endif /* _CBUS_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _BMU_H_ ++#define _BMU_H_ ++ ++#define BMU_VERSION 0x000 ++#define BMU_CTRL 0x004 ++#define BMU_UCAST_CONFIG 0x008 ++#define BMU_UCAST_BASE_ADDR 0x00c ++#define BMU_BUF_SIZE 0x010 ++#define BMU_BUF_CNT 0x014 ++#define BMU_THRES 0x018 ++#define BMU_INT_SRC 0x020 ++#define BMU_INT_ENABLE 0x024 ++#define BMU_ALLOC_CTRL 0x030 ++#define BMU_FREE_CTRL 0x034 ++#define BMU_FREE_ERR_ADDR 0x038 ++#define BMU_CURR_BUF_CNT 0x03c ++#define BMU_MCAST_CNT 0x040 ++#define BMU_MCAST_ALLOC_CTRL 0x044 ++#define BMU_REM_BUF_CNT 0x048 ++#define BMU_LOW_WATERMARK 0x050 ++#define BMU_HIGH_WATERMARK 0x054 ++#define BMU_INT_MEM_ACCESS 0x100 ++ ++typedef struct { ++ unsigned long baseaddr; ++ u32 count; ++ u32 size; ++} BMU_CFG; ++ ++ ++#define BMU1_BUF_SIZE LMEM_BUF_SIZE_LN2 ++#define BMU2_BUF_SIZE DDR_BUF_SIZE_LN2 ++ ++#define BMU2_MCAST_ALLOC_CTRL BMU2_BASE_ADDR + BMU_MCAST_ALLOC_CTRL ++ ++#endif /* _BMU_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h +@@ -0,0 +1,242 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _CLASS_CSR_H_ ++#define _CLASS_CSR_H_ ++ ++/** @file class_csr.h. ++ * class_csr - block containing all the classifier control and status register. Mapped on CBUS and accessible from all PE's and ARM. ++ */ ++ ++ ++#define CLASS_VERSION (CLASS_CSR_BASE_ADDR + 0x000) ++#define CLASS_TX_CTRL (CLASS_CSR_BASE_ADDR + 0x004) ++#define CLASS_INQ_PKTPTR (CLASS_CSR_BASE_ADDR + 0x010) ++#define CLASS_HDR_SIZE (CLASS_CSR_BASE_ADDR + 0x014) /**< (ddr_hdr_size[24:16], lmem_hdr_size[5:0]) */ ++#define CLASS_HDR_SIZE_LMEM(off) ((off) & 0x3f) /**< LMEM header size for the Classifier block.\ Data in the LMEM is written from this offset. */ ++#define CLASS_HDR_SIZE_DDR(off) (((off) & 0x1ff) << 16) /**< DDR header size for the Classifier block.\ Data in the DDR is written from this offset. */ ++ ++#define CLASS_PE0_QB_DM_ADDR0 (CLASS_CSR_BASE_ADDR + 0x020) /**< DMEM address of first [15:0] and second [31:16] buffers on QB side. */ ++#define CLASS_PE0_QB_DM_ADDR1 (CLASS_CSR_BASE_ADDR + 0x024) /**< DMEM address of third [15:0] and fourth [31:16] buffers on QB side. */ ++ ++#define CLASS_PE0_RO_DM_ADDR0 (CLASS_CSR_BASE_ADDR + 0x060) /**< DMEM address of first [15:0] and second [31:16] buffers on RO side. */ ++#define CLASS_PE0_RO_DM_ADDR1 (CLASS_CSR_BASE_ADDR + 0x064) /**< DMEM address of third [15:0] and fourth [31:16] buffers on RO side. */ ++ ++/** @name Class PE memory access. Allows external PE's and HOST to read/write PMEM/DMEM memory ranges for each classifier PE. ++ */ ++//@{ ++#define CLASS_MEM_ACCESS_ADDR (CLASS_CSR_BASE_ADDR + 0x100) /**< {sr_pe_mem_cmd[31], csr_pe_mem_wren[27:24], csr_pe_mem_addr[23:0]}, See \ref XXX_MEM_ACCESS_ADDR for details. */ ++#define CLASS_MEM_ACCESS_WDATA (CLASS_CSR_BASE_ADDR + 0x104) /**< Internal Memory Access Write Data [31:0] */ ++#define CLASS_MEM_ACCESS_RDATA (CLASS_CSR_BASE_ADDR + 0x108) /**< Internal Memory Access Read Data [31:0] */ ++//@} ++#define CLASS_TM_INQ_ADDR (CLASS_CSR_BASE_ADDR + 0x114) ++#define CLASS_PE_STATUS (CLASS_CSR_BASE_ADDR + 0x118) ++ ++#define CLASS_PHY1_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x11c) ++#define CLASS_PHY1_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x120) ++#define CLASS_PHY1_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x124) ++#define CLASS_PHY1_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x128) ++#define CLASS_PHY1_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x12c) ++#define CLASS_PHY1_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x130) ++#define CLASS_PHY1_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x134) ++#define CLASS_PHY1_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x138) ++#define CLASS_PHY1_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x13c) ++#define CLASS_PHY1_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x140) ++#define CLASS_PHY2_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x144) ++#define CLASS_PHY2_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x148) ++#define CLASS_PHY2_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x14c) ++#define CLASS_PHY2_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x150) ++#define CLASS_PHY2_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x154) ++#define CLASS_PHY2_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x158) ++#define CLASS_PHY2_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x15c) ++#define CLASS_PHY2_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x160) ++#define CLASS_PHY2_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x164) ++#define CLASS_PHY2_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x168) ++#define CLASS_PHY3_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x16c) ++#define CLASS_PHY3_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x170) ++#define CLASS_PHY3_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x174) ++#define CLASS_PHY3_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x178) ++#define CLASS_PHY3_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x17c) ++#define CLASS_PHY3_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x180) ++#define CLASS_PHY3_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x184) ++#define CLASS_PHY3_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x188) ++#define CLASS_PHY3_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x18c) ++#define CLASS_PHY3_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x190) ++#define CLASS_PHY1_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x194) ++#define CLASS_PHY1_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x198) ++#define CLASS_PHY1_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x19c) ++#define CLASS_PHY1_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1a0) ++#define CLASS_PHY2_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1a4) ++#define CLASS_PHY2_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1a8) ++#define CLASS_PHY2_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x1ac) ++#define CLASS_PHY2_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1b0) ++#define CLASS_PHY3_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1b4) ++#define CLASS_PHY3_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1b8) ++#define CLASS_PHY3_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x1bc) ++#define CLASS_PHY3_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1c0) ++#define CLASS_PHY4_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1c4) ++#define CLASS_PHY4_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1c8) ++#define CLASS_PHY4_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x1cc) ++#define CLASS_PHY4_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1d0) ++#define CLASS_PHY4_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x1d4) ++#define CLASS_PHY4_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x1d8) ++#define CLASS_PHY4_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x1dc) ++#define CLASS_PHY4_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x1e0) ++#define CLASS_PHY4_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x1e4) ++#define CLASS_PHY4_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x1e8) ++#define CLASS_PHY4_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x1ec) ++#define CLASS_PHY4_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x1f0) ++#define CLASS_PHY4_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x1f4) ++#define CLASS_PHY4_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x1f8) ++ ++#define CLASS_PE_SYS_CLK_RATIO (CLASS_CSR_BASE_ADDR + 0x200) ++#define CLASS_AFULL_THRES (CLASS_CSR_BASE_ADDR + 0x204) ++#define CLASS_GAP_BETWEEN_READS (CLASS_CSR_BASE_ADDR + 0x208) ++#define CLASS_MAX_BUF_CNT (CLASS_CSR_BASE_ADDR + 0x20c) ++#define CLASS_TSQ_FIFO_THRES (CLASS_CSR_BASE_ADDR + 0x210) ++#define CLASS_TSQ_MAX_CNT (CLASS_CSR_BASE_ADDR + 0x214) ++#define CLASS_IRAM_DATA_0 (CLASS_CSR_BASE_ADDR + 0x218) ++#define CLASS_IRAM_DATA_1 (CLASS_CSR_BASE_ADDR + 0x21c) ++#define CLASS_IRAM_DATA_2 (CLASS_CSR_BASE_ADDR + 0x220) ++#define CLASS_IRAM_DATA_3 (CLASS_CSR_BASE_ADDR + 0x224) ++ ++#define CLASS_BUS_ACCESS_ADDR (CLASS_CSR_BASE_ADDR + 0x228) ++ ++#define CLASS_BUS_ACCESS_WDATA (CLASS_CSR_BASE_ADDR + 0x22c) ++#define CLASS_BUS_ACCESS_RDATA (CLASS_CSR_BASE_ADDR + 0x230) ++ ++#define CLASS_ROUTE_HASH_ENTRY_SIZE (CLASS_CSR_BASE_ADDR + 0x234) /**< (route_entry_size[9:0], route_hash_size[23:16] (this is actually ln2(size))) */ ++#define CLASS_ROUTE_ENTRY_SIZE(size) ((size) & 0x1ff) ++#define CLASS_ROUTE_HASH_SIZE(hash_bits) (((hash_bits) & 0xff) << 16) ++ ++#define CLASS_ROUTE_TABLE_BASE (CLASS_CSR_BASE_ADDR + 0x238) ++ ++#define CLASS_ROUTE_MULTI (CLASS_CSR_BASE_ADDR + 0x23c) ++#define CLASS_SMEM_OFFSET (CLASS_CSR_BASE_ADDR + 0x240) ++#define CLASS_LMEM_BUF_SIZE (CLASS_CSR_BASE_ADDR + 0x244) ++#define CLASS_VLAN_ID (CLASS_CSR_BASE_ADDR + 0x248) ++#define CLASS_BMU1_BUF_FREE (CLASS_CSR_BASE_ADDR + 0x24c) ++#define CLASS_USE_TMU_INQ (CLASS_CSR_BASE_ADDR + 0x250) ++#define CLASS_VLAN_ID1 (CLASS_CSR_BASE_ADDR + 0x254) ++ ++#define CLASS_BUS_ACCESS_BASE (CLASS_CSR_BASE_ADDR + 0x258) ++#define CLASS_BUS_ACCESS_BASE_MASK (0xFF000000) //bit 31:24 of PE peripheral address are stored in CLASS_BUS_ACCESS_BASE ++ ++#define CLASS_HIF_PARSE (CLASS_CSR_BASE_ADDR + 0x25c) ++ ++#define CLASS_HOST_PE0_GP (CLASS_CSR_BASE_ADDR + 0x260) ++#define CLASS_PE0_GP (CLASS_CSR_BASE_ADDR + 0x264) ++#define CLASS_HOST_PE1_GP (CLASS_CSR_BASE_ADDR + 0x268) ++#define CLASS_PE1_GP (CLASS_CSR_BASE_ADDR + 0x26c) ++#define CLASS_HOST_PE2_GP (CLASS_CSR_BASE_ADDR + 0x270) ++#define CLASS_PE2_GP (CLASS_CSR_BASE_ADDR + 0x274) ++#define CLASS_HOST_PE3_GP (CLASS_CSR_BASE_ADDR + 0x278) ++#define CLASS_PE3_GP (CLASS_CSR_BASE_ADDR + 0x27c) ++#define CLASS_HOST_PE4_GP (CLASS_CSR_BASE_ADDR + 0x280) ++#define CLASS_PE4_GP (CLASS_CSR_BASE_ADDR + 0x284) ++#define CLASS_HOST_PE5_GP (CLASS_CSR_BASE_ADDR + 0x288) ++#define CLASS_PE5_GP (CLASS_CSR_BASE_ADDR + 0x28c) ++ ++#define CLASS_PE_INT_SRC (CLASS_CSR_BASE_ADDR + 0x290) ++#define CLASS_PE_INT_ENABLE (CLASS_CSR_BASE_ADDR + 0x294) ++ ++#define CLASS_TPID0_TPID1 (CLASS_CSR_BASE_ADDR + 0x298) ++#define CLASS_TPID2 (CLASS_CSR_BASE_ADDR + 0x29c) ++ ++#define CLASS_L4_CHKSUM_ADDR (CLASS_CSR_BASE_ADDR + 0x2a0) ++ ++#define CLASS_PE0_DEBUG (CLASS_CSR_BASE_ADDR + 0x2a4) ++#define CLASS_PE1_DEBUG (CLASS_CSR_BASE_ADDR + 0x2a8) ++#define CLASS_PE2_DEBUG (CLASS_CSR_BASE_ADDR + 0x2ac) ++#define CLASS_PE3_DEBUG (CLASS_CSR_BASE_ADDR + 0x2b0) ++#define CLASS_PE4_DEBUG (CLASS_CSR_BASE_ADDR + 0x2b4) ++#define CLASS_PE5_DEBUG (CLASS_CSR_BASE_ADDR + 0x2b8) ++ ++#define CLASS_STATE (CLASS_CSR_BASE_ADDR + 0x2bc) ++ ++/* CLASS defines */ ++#define CLASS_PBUF_SIZE 0x100 /* Fixed by hardware */ ++#define CLASS_PBUF_HEADER_OFFSET 0x80 /* Can be configured */ ++ ++#define CLASS_PBUF0_BASE_ADDR 0x000 /* Can be configured */ ++#define CLASS_PBUF1_BASE_ADDR (CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_SIZE) /* Can be configured */ ++#define CLASS_PBUF2_BASE_ADDR (CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_SIZE) /* Can be configured */ ++#define CLASS_PBUF3_BASE_ADDR (CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_SIZE) /* Can be configured */ ++ ++#define CLASS_PBUF0_HEADER_BASE_ADDR (CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET) ++#define CLASS_PBUF1_HEADER_BASE_ADDR (CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET) ++#define CLASS_PBUF2_HEADER_BASE_ADDR (CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET) ++#define CLASS_PBUF3_HEADER_BASE_ADDR (CLASS_PBUF3_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET) ++ ++#define CLASS_PE0_RO_DM_ADDR0_VAL ((CLASS_PBUF1_BASE_ADDR << 16) | CLASS_PBUF0_BASE_ADDR) ++#define CLASS_PE0_RO_DM_ADDR1_VAL ((CLASS_PBUF3_BASE_ADDR << 16) | CLASS_PBUF2_BASE_ADDR) ++ ++#define CLASS_PE0_QB_DM_ADDR0_VAL ((CLASS_PBUF1_HEADER_BASE_ADDR << 16) | CLASS_PBUF0_HEADER_BASE_ADDR) ++#define CLASS_PE0_QB_DM_ADDR1_VAL ((CLASS_PBUF3_HEADER_BASE_ADDR << 16) | CLASS_PBUF2_HEADER_BASE_ADDR) ++ ++#define CLASS_ROUTE_SIZE 128 ++#define CLASS_MAX_ROUTE_SIZE 256 ++#define CLASS_ROUTE_HASH_BITS 20 ++#define CLASS_ROUTE_HASH_MASK ((1 << CLASS_ROUTE_HASH_BITS) - 1) ++ ++#define CLASS_ROUTE0_BASE_ADDR 0x400 /* Can be configured */ ++#define CLASS_ROUTE1_BASE_ADDR (CLASS_ROUTE0_BASE_ADDR + CLASS_ROUTE_SIZE) /* Can be configured */ ++#define CLASS_ROUTE2_BASE_ADDR (CLASS_ROUTE1_BASE_ADDR + CLASS_ROUTE_SIZE) /* Can be configured */ ++#define CLASS_ROUTE3_BASE_ADDR (CLASS_ROUTE2_BASE_ADDR + CLASS_ROUTE_SIZE) /* Can be configured */ ++ ++#define CLASS_SA_SIZE 128 ++#define CLASS_IPSEC_SA0_BASE_ADDR 0x600 ++#define CLASS_IPSEC_SA1_BASE_ADDR (CLASS_IPSEC_SA0_BASE_ADDR + CLASS_SA_SIZE) /* not used */ ++#define CLASS_IPSEC_SA2_BASE_ADDR (CLASS_IPSEC_SA1_BASE_ADDR + CLASS_SA_SIZE) /* not used */ ++#define CLASS_IPSEC_SA3_BASE_ADDR (CLASS_IPSEC_SA2_BASE_ADDR + CLASS_SA_SIZE) /* not used */ ++ ++/* generic purpose free dmem buffer, last portion of 2K dmem pbuf */ ++#define CLASS_GP_DMEM_BUF_SIZE (2048 - (CLASS_PBUF_SIZE*4) - (CLASS_ROUTE_SIZE*4) - (CLASS_SA_SIZE)) ++#define CLASS_GP_DMEM_BUF ((void *)(CLASS_IPSEC_SA0_BASE_ADDR + CLASS_SA_SIZE)) ++ ++ ++#define TWO_LEVEL_ROUTE (1 << 0) ++#define PHYNO_IN_HASH (1 << 1) ++#define HW_ROUTE_FETCH (1 << 3) ++#define HW_BRIDGE_FETCH (1 << 5) ++#define IP_ALIGNED (1 << 6) ++#define ARC_HIT_CHECK_EN (1 << 7) ++#define CLASS_TOE (1 << 11) ++#define HASH_NORMAL (0 << 12) ++#define HASH_CRC_PORT (1 << 12) ++#define HASH_CRC_IP (2 << 12) ++#define HASH_CRC_PORT_IP (3 << 12) ++#define QB2BUS_LE (1 << 15) ++ ++#define TCP_CHKSUM_DROP (1 << 0) ++#define UDP_CHKSUM_DROP (1 << 1) ++#define IPV4_CHKSUM_DROP (1 << 9) ++ ++/*CLASS_HIF_PARSE bits*/ ++#define HIF_PKT_CLASS_EN (1 << 0) ++#define HIF_PKT_OFFSET(ofst) ((ofst&0xF) << 1) ++ ++typedef struct { ++ u32 toe_mode; ++ unsigned long route_table_baseaddr; ++ u32 route_table_hash_bits; ++ u32 pe_sys_clk_ratio; ++ u32 resume; ++} CLASS_CFG; ++ ++#endif /* _CLASS_CSR_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/emac.h +@@ -0,0 +1,243 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _EMAC_H_ ++#define _EMAC_H_ ++ ++#define EMAC_NETWORK_CONTROL 0x000 ++#define EMAC_NETWORK_CONFIG 0x004 ++#define EMAC_NETWORK_STATUS 0x008 ++#define EMAC_DMA_CONFIG 0x010 ++ ++#define EMAC_PHY_MANAGEMENT 0x034 ++ ++#define EMAC_HASH_BOT 0x080 ++#define EMAC_HASH_TOP 0x084 ++ ++#define EMAC_SPEC1_ADD_BOT 0x088 ++#define EMAC_SPEC1_ADD_TOP 0x08c ++#define EMAC_SPEC2_ADD_BOT 0x090 ++#define EMAC_SPEC2_ADD_TOP 0x094 ++#define EMAC_SPEC3_ADD_BOT 0x098 ++#define EMAC_SPEC3_ADD_TOP 0x09c ++#define EMAC_SPEC4_ADD_BOT 0x0a0 ++#define EMAC_SPEC4_ADD_TOP 0x0a4 ++#define EMAC_WOL 0x0b8 ++ ++#define EMAC_STACKED_VLAN_REG 0x0c0 ++ ++#define EMAC_SPEC1_ADD_MASK_BOT 0x0c8 ++#define EMAC_SPEC1_ADD_MASK_TOP 0x0cc ++ ++#define EMAC_RMON_BASE_OFST 0x100 ++ ++#define EMAC_SPEC5_ADD_BOT 0x300 ++#define EMAC_SPEC5_ADD_TOP 0x304 ++#define EMAC_SPEC6_ADD_BOT 0x308 ++#define EMAC_SPEC6_ADD_TOP 0x30c ++#define EMAC_SPEC7_ADD_BOT 0x310 ++#define EMAC_SPEC7_ADD_TOP 0x314 ++#define EMAC_SPEC8_ADD_BOT 0x318 ++#define EMAC_SPEC8_ADD_TOP 0x31c ++#define EMAC_SPEC9_ADD_BOT 0x320 ++#define EMAC_SPEC9_ADD_TOP 0x324 ++#define EMAC_SPEC10_ADD_BOT 0x328 ++#define EMAC_SPEC10_ADD_TOP 0x32c ++#define EMAC_SPEC11_ADD_BOT 0x330 ++#define EMAC_SPEC11_ADD_TOP 0x334 ++#define EMAC_SPEC12_ADD_BOT 0x338 ++#define EMAC_SPEC12_ADD_TOP 0x33c ++#define EMAC_SPEC13_ADD_BOT 0x340 ++#define EMAC_SPEC13_ADD_TOP 0x344 ++#define EMAC_SPEC14_ADD_BOT 0x348 ++#define EMAC_SPEC14_ADD_TOP 0x34c ++#define EMAC_SPEC15_ADD_BOT 0x350 ++#define EMAC_SPEC15_ADD_TOP 0x354 ++#define EMAC_SPEC16_ADD_BOT 0x358 ++#define EMAC_SPEC16_ADD_TOP 0x35c ++#define EMAC_SPEC17_ADD_BOT 0x360 ++#define EMAC_SPEC17_ADD_TOP 0x364 ++#define EMAC_SPEC18_ADD_BOT 0x368 ++#define EMAC_SPEC18_ADD_TOP 0x36c ++#define EMAC_SPEC19_ADD_BOT 0x370 ++#define EMAC_SPEC19_ADD_TOP 0x374 ++#define EMAC_SPEC20_ADD_BOT 0x378 ++#define EMAC_SPEC20_ADD_TOP 0x37c ++#define EMAC_SPEC21_ADD_BOT 0x380 ++#define EMAC_SPEC21_ADD_TOP 0x384 ++#define EMAC_SPEC22_ADD_BOT 0x388 ++#define EMAC_SPEC22_ADD_TOP 0x38c ++#define EMAC_SPEC23_ADD_BOT 0x390 ++#define EMAC_SPEC23_ADD_TOP 0x394 ++#define EMAC_SPEC24_ADD_BOT 0x398 ++#define EMAC_SPEC24_ADD_TOP 0x39c ++#define EMAC_SPEC25_ADD_BOT 0x3a0 ++#define EMAC_SPEC25_ADD_TOP 0x3a4 ++#define EMAC_SPEC26_ADD_BOT 0x3a8 ++#define EMAC_SPEC26_ADD_TOP 0x3ac ++#define EMAC_SPEC27_ADD_BOT 0x3b0 ++#define EMAC_SPEC27_ADD_TOP 0x3b4 ++#define EMAC_SPEC28_ADD_BOT 0x3b8 ++#define EMAC_SPEC28_ADD_TOP 0x3bc ++#define EMAC_SPEC29_ADD_BOT 0x3c0 ++#define EMAC_SPEC29_ADD_TOP 0x3c4 ++#define EMAC_SPEC30_ADD_BOT 0x3c8 ++#define EMAC_SPEC30_ADD_TOP 0x3cc ++#define EMAC_SPEC31_ADD_BOT 0x3d0 ++#define EMAC_SPEC31_ADD_TOP 0x3d4 ++#define EMAC_SPEC32_ADD_BOT 0x3d8 ++#define EMAC_SPEC32_ADD_TOP 0x3dc ++ ++#define EMAC_SPEC_ADDR_MAX 32 ++ ++#define EMAC_CONTROL 0x7a0 ++ ++/* GEMAC definitions and settings */ ++ ++#define EMAC_PORT_0 0 ++#define EMAC_PORT_1 1 ++#define EMAC_PORT_2 2 ++ ++/* The possible operating speeds of the MAC, currently supporting 10, 100 and ++ * 1000Mb modes. ++ */ ++typedef enum {SPEED_10M, SPEED_100M, SPEED_1000M, SPEED_1000M_PCS} MAC_SPEED; ++ ++#define GMII 1 ++#define MII 2 ++#define RMII 3 ++#define RGMII 4 ++#define SGMII 5 ++ ++#define DUP_HALF 0x00 ++#define DUP_FULL 0x01 ++ ++/* EMAC_NETWORK_CONTROL bits definition */ ++#define EMAC_LB_PHY (1 << 0) ++#define EMAC_LB_MAC (1 << 1) ++#define EMAC_RX_ENABLE (1 << 2) ++#define EMAC_TX_ENABLE (1 << 3) ++#define EMAC_MDIO_EN (1 << 4) /* Enable MDIO port */ ++ ++/* WoL (Wake on Lan bit definition) */ ++#define EMAC_WOL_MAGIC (1 << 16) ++#define EMAC_WOL_ARP (1 << 17) ++#define EMAC_WOL_SPEC_ADDR (1 << 18) ++#define EMAC_WOL_MULTI (1 << 19) ++ ++/* EMAC_NETWORK_CONFIG bits definition */ ++#define EMAC_SPEED_100 (1 << 0) ++#define EMAC_HALF_DUP (0 << 1) ++#define EMAC_FULL_DUP (1 << 1) ++#define EMAC_DUPLEX_MASK (1 << 1) ++#define EMAC_ENABLE_JUMBO_FRAME (1 << 3) ++#define EMAC_ENABLE_COPY_ALL (1 << 4) ++#define EMAC_NO_BROADCAST (1 << 5) ++#define EMAC_ENABLE_MULTICAST (1 << 6) ++#define EMAC_ENABLE_UNICAST (1 << 7) ++#define EMAC_ENABLE_1536_RX (1 << 8) ++#define EMAC_SPEED_1000 (1 << 10) ++#define EMAC_PCS_ENABLE (1 << 11) ++#define EMAC_ENABLE_PAUSE_RX (1 << 13) ++#define EMAC_REMOVE_FCS (1 << 17) ++#define EMAC_ENABLE_CHKSUM_RX (1 << 24) ++#define EMAC_MDC_DIV_MASK (0x7 << 18) /* PCLK divisor for MDC */ ++#define EMAC_DATA_BUS_WIDTH_SHIFT 21 ++#define EMAC_DATA_BUS_WIDTH_MASK (0x3 << EMAC_DATA_BUS_WIDTH_SHIFT) ++#define EMAC_DATA_BUS_WIDTH_32 (0x00 << EMAC_DATA_BUS_WIDTH_SHIFT) ++#define EMAC_DATA_BUS_WIDTH_64 (0x01 << EMAC_DATA_BUS_WIDTH_SHIFT) ++#define EMAC_DATA_BUS_WIDTH_128 (0x10 << EMAC_DATA_BUS_WIDTH_SHIFT) ++#define EMAC_ENABLE_FCS_RX (1 << 26) ++#define EMAC_SGMII_MODE_ENABLE (1 << 27) ++ ++#define EMAC_SPEED_MASK (EMAC_SPEED_100 | EMAC_SPEED_1000) ++ ++/* EMAC_STACKED_VLAN_REG bits definition */ ++#define EMAC_ENABLE_STACKED_VLAN (1 << 31) ++ ++/* EMAC_CONTROL bits definition */ ++#define EMAC_TWO_BYTES_IP_ALIGN (1 << 0) // two bytes IP alignement ++ ++/* EMAC_NET_STATUS bits definition */ ++#define EMAC_PHY_IDLE (1<<2) /* PHY management is idle */ ++#define EMAC_MDIO_IN (1<<1) /* Status of mdio_in pin */ ++#define EMAC_LINK_STATUS (1<<0) /* Status of link pin */ ++ ++/* EMAC_DMA_CONFIG Bit definitions */ ++#define EMAC_ENABLE_CHKSUM_TX (1<<11) ++ ++//RMII enable – bit 1 / RGMII enable – bit 2 ++#define EMAC_RMII_MODE_ENABLE ((1 << 1) | (0 << 2)) ++#define EMAC_RMII_MODE_DISABLE (0 << 1) ++#define EMAC_RGMII_MODE_ENABLE ((0 << 1) | (1 << 2)) ++#define EMAC_RGMII_MODE_DISABLE (0 << 2) ++#define EMAC_MII_MODE_ENABLE (EMAC_RMII_MODE_DISABLE | EMAC_RGMII_MODE_DISABLE) ++#define EMAC_GMII_MODE_ENABLE (EMAC_RMII_MODE_DISABLE | EMAC_RGMII_MODE_DISABLE) ++#define EMAC_MODE_MASK (0x3 << 1) ++ ++/* Default configuration */ ++#define EMAC0_DEFAULT_DUPLEX_MODE FULLDUPLEX ++#define EMAC0_DEFAULT_EMAC_MODE RGMII ++#define EMAC0_DEFAULT_EMAC_SPEED SPEED_1000M ++ ++#define EMAC1_DEFAULT_DUPLEX_MODE FULLDUPLEX ++#define EMAC1_DEFAULT_EMAC_MODE RGMII ++#define EMAC1_DEFAULT_EMAC_SPEED SPEED_1000M ++ ++#define EMAC2_DEFAULT_DUPLEX_MODE FULLDUPLEX ++#define EMAC2_DEFAULT_EMAC_MODE RGMII ++#define EMAC2_DEFAULT_EMAC_SPEED SPEED_1000M ++ ++/* EMAC Hash size */ ++#define EMAC_HASH_REG_BITS 64 ++ ++/* The Address organisation for the MAC device. All addresses are split into ++ * two 32-bit register fields. The first one (bottom) is the lower 32-bits of ++ * the address and the other field are the high order bits - this may be 16-bits ++ * in the case of MAC addresses, or 32-bits for the hash address. ++ * In terms of memory storage, the first item (bottom) is assumed to be at a ++ * lower address location than 'top'. i.e. top should be at address location of ++ * 'bottom' + 4 bytes. ++ */ ++typedef struct { ++ u32 bottom; /* Lower 32-bits of address. */ ++ u32 top; /* Upper 32-bits of address. */ ++} MAC_ADDR; ++ ++ ++/* The following is the organisation of the address filters section of the MAC ++ * registers. The Cadence MAC contains four possible specific address match ++ * addresses, if an incoming frame corresponds to any one of these four ++ * addresses then the frame will be copied to memory. ++ * It is not necessary for all four of the address match registers to be ++ * programmed, this is application dependant. ++ */ ++typedef struct { ++ MAC_ADDR one; /* Specific address register 1. */ ++ MAC_ADDR two; /* Specific address register 2. */ ++ MAC_ADDR three; /* Specific address register 3. */ ++ MAC_ADDR four; /* Specific address register 4. */ ++} SPEC_ADDR; ++ ++typedef struct { ++ u32 mode; ++ u32 speed; ++ u32 duplex; ++} GEMAC_CFG; ++ ++#endif /* _EMAC_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h +@@ -0,0 +1,250 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _EMAC_H_ ++#define _EMAC_H_ ++ ++#define EMAC_IEVENT_REG 0x004 ++#define EMAC_IMASK_REG 0x008 ++#define EMAC_R_DES_ACTIVE_REG 0x010 ++#define EMAC_X_DES_ACTIVE_REG 0x014 ++#define EMAC_ECNTRL_REG 0x024 ++#define EMAC_MII_DATA_REG 0x040 ++#define EMAC_MII_CTRL_REG 0x044 ++#define EMAC_MIB_CTRL_STS_REG 0x064 ++#define EMAC_RCNTRL_REG 0x084 ++#define EMAC_TCNTRL_REG 0x0C4 ++#define EMAC_PHY_ADDR_LOW 0x0E4 ++#define EMAC_PHY_ADDR_HIGH 0x0E8 ++#define EMAC_GAUR 0x120 ++#define EMAC_GALR 0x124 ++#define EMAC_TFWR_STR_FWD 0x144 ++#define EMAC_RX_SECTIOM_FULL 0x190 ++#define EMAC_TX_SECTION_EMPTY 0x1A0 ++#define EMAC_TRUNC_FL 0x1B0 ++ ++#define RMON_T_DROP 0x200 /* Count of frames not cntd correctly */ ++#define RMON_T_PACKETS 0x204 /* RMON TX packet count */ ++#define RMON_T_BC_PKT 0x208 /* RMON TX broadcast pkts */ ++#define RMON_T_MC_PKT 0x20c /* RMON TX multicast pkts */ ++#define RMON_T_CRC_ALIGN 0x210 /* RMON TX pkts with CRC align err */ ++#define RMON_T_UNDERSIZE 0x214 /* RMON TX pkts < 64 bytes, good CRC */ ++#define RMON_T_OVERSIZE 0x218 /* RMON TX pkts > MAX_FL bytes good CRC */ ++#define RMON_T_FRAG 0x21c /* RMON TX pkts < 64 bytes, bad CRC */ ++#define RMON_T_JAB 0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */ ++#define RMON_T_COL 0x224 /* RMON TX collision count */ ++#define RMON_T_P64 0x228 /* RMON TX 64 byte pkts */ ++#define RMON_T_P65TO127 0x22c /* RMON TX 65 to 127 byte pkts */ ++#define RMON_T_P128TO255 0x230 /* RMON TX 128 to 255 byte pkts */ ++#define RMON_T_P256TO511 0x234 /* RMON TX 256 to 511 byte pkts */ ++#define RMON_T_P512TO1023 0x238 /* RMON TX 512 to 1023 byte pkts */ ++#define RMON_T_P1024TO2047 0x23c /* RMON TX 1024 to 2047 byte pkts */ ++#define RMON_T_P_GTE2048 0x240 /* RMON TX pkts > 2048 bytes */ ++#define RMON_T_OCTETS 0x244 /* RMON TX octets */ ++#define IEEE_T_DROP 0x248 /* Count of frames not counted crtly */ ++#define IEEE_T_FRAME_OK 0x24c /* Frames tx'd OK */ ++#define IEEE_T_1COL 0x250 /* Frames tx'd with single collision */ ++#define IEEE_T_MCOL 0x254 /* Frames tx'd with multiple collision */ ++#define IEEE_T_DEF 0x258 /* Frames tx'd after deferral delay */ ++#define IEEE_T_LCOL 0x25c /* Frames tx'd with late collision */ ++#define IEEE_T_EXCOL 0x260 /* Frames tx'd with excesv collisions */ ++#define IEEE_T_MACERR 0x264 /* Frames tx'd with TX FIFO underrun */ ++#define IEEE_T_CSERR 0x268 /* Frames tx'd with carrier sense err */ ++#define IEEE_T_SQE 0x26c /* Frames tx'd with SQE err */ ++#define IEEE_T_FDXFC 0x270 /* Flow control pause frames tx'd */ ++#define IEEE_T_OCTETS_OK 0x274 /* Octet count for frames tx'd w/o err */ ++#define RMON_R_PACKETS 0x284 /* RMON RX packet count */ ++#define RMON_R_BC_PKT 0x288 /* RMON RX broadcast pkts */ ++#define RMON_R_MC_PKT 0x28c /* RMON RX multicast pkts */ ++#define RMON_R_CRC_ALIGN 0x290 /* RMON RX pkts with CRC alignment err */ ++#define RMON_R_UNDERSIZE 0x294 /* RMON RX pkts < 64 bytes, good CRC */ ++#define RMON_R_OVERSIZE 0x298 /* RMON RX pkts > MAX_FL bytes good CRC */ ++#define RMON_R_FRAG 0x29c /* RMON RX pkts < 64 bytes, bad CRC */ ++#define RMON_R_JAB 0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */ ++#define RMON_R_RESVD_O 0x2a4 /* Reserved */ ++#define RMON_R_P64 0x2a8 /* RMON RX 64 byte pkts */ ++#define RMON_R_P65TO127 0x2ac /* RMON RX 65 to 127 byte pkts */ ++#define RMON_R_P128TO255 0x2b0 /* RMON RX 128 to 255 byte pkts */ ++#define RMON_R_P256TO511 0x2b4 /* RMON RX 256 to 511 byte pkts */ ++#define RMON_R_P512TO1023 0x2b8 /* RMON RX 512 to 1023 byte pkts */ ++#define RMON_R_P1024TO2047 0x2bc /* RMON RX 1024 to 2047 byte pkts */ ++#define RMON_R_P_GTE2048 0x2c0 /* RMON RX pkts > 2048 bytes */ ++#define RMON_R_OCTETS 0x2c4 /* RMON RX octets */ ++#define IEEE_R_DROP 0x2c8 /* Count frames not counted correctly */ ++#define IEEE_R_FRAME_OK 0x2cc /* Frames rx'd OK */ ++#define IEEE_R_CRC 0x2d0 /* Frames rx'd with CRC err */ ++#define IEEE_R_ALIGN 0x2d4 /* Frames rx'd with alignment err */ ++#define IEEE_R_MACERR 0x2d8 /* Receive FIFO overflow count */ ++#define IEEE_R_FDXFC 0x2dc /* Flow control pause frames rx'd */ ++#define IEEE_R_OCTETS_OK 0x2e0 /* Octet cnt for frames rx'd w/o err */ ++ ++#define EMAC_SMAC_0_0 0x500 /*Supplemental MAC Address 0 (RW).*/ ++#define EMAC_SMAC_0_1 0x504 /*Supplemental MAC Address 0 (RW).*/ ++ ++/* GEMAC definitions and settings */ ++ ++#define EMAC_PORT_0 0 ++#define EMAC_PORT_1 1 ++ ++/* GEMAC Bit definitions */ ++#define EMAC_IEVENT_HBERR 0x80000000 ++#define EMAC_IEVENT_BABR 0x40000000 ++#define EMAC_IEVENT_BABT 0x20000000 ++#define EMAC_IEVENT_GRA 0x10000000 ++#define EMAC_IEVENT_TXF 0x08000000 ++#define EMAC_IEVENT_TXB 0x04000000 ++#define EMAC_IEVENT_RXF 0x02000000 ++#define EMAC_IEVENT_RXB 0x01000000 ++#define EMAC_IEVENT_MII 0x00800000 ++#define EMAC_IEVENT_EBERR 0x00400000 ++#define EMAC_IEVENT_LC 0x00200000 ++#define EMAC_IEVENT_RL 0x00100000 ++#define EMAC_IEVENT_UN 0x00080000 ++ ++#define EMAC_IMASK_HBERR 0x80000000 ++#define EMAC_IMASK_BABR 0x40000000 ++#define EMAC_IMASKT_BABT 0x20000000 ++#define EMAC_IMASK_GRA 0x10000000 ++#define EMAC_IMASKT_TXF 0x08000000 ++#define EMAC_IMASK_TXB 0x04000000 ++#define EMAC_IMASKT_RXF 0x02000000 ++#define EMAC_IMASK_RXB 0x01000000 ++#define EMAC_IMASK_MII 0x00800000 ++#define EMAC_IMASK_EBERR 0x00400000 ++#define EMAC_IMASK_LC 0x00200000 ++#define EMAC_IMASKT_RL 0x00100000 ++#define EMAC_IMASK_UN 0x00080000 ++ ++#define EMAC_RCNTRL_MAX_FL_SHIFT 16 ++#define EMAC_RCNTRL_LOOP 0x00000001 ++#define EMAC_RCNTRL_DRT 0x00000002 ++#define EMAC_RCNTRL_MII_MODE 0x00000004 ++#define EMAC_RCNTRL_PROM 0x00000008 ++#define EMAC_RCNTRL_BC_REJ 0x00000010 ++#define EMAC_RCNTRL_FCE 0x00000020 ++#define EMAC_RCNTRL_RGMII 0x00000040 ++#define EMAC_RCNTRL_SGMII 0x00000080 ++#define EMAC_RCNTRL_RMII 0x00000100 ++#define EMAC_RCNTRL_RMII_10T 0x00000200 ++#define EMAC_RCNTRL_CRC_FWD 0x00004000 ++ ++#define EMAC_TCNTRL_GTS 0x00000001 ++#define EMAC_TCNTRL_HBC 0x00000002 ++#define EMAC_TCNTRL_FDEN 0x00000004 ++#define EMAC_TCNTRL_TFC_PAUSE 0x00000008 ++#define EMAC_TCNTRL_RFC_PAUSE 0x00000010 ++ ++#define EMAC_ECNTRL_RESET 0x00000001 /* reset the EMAC */ ++#define EMAC_ECNTRL_ETHER_EN 0x00000002 /* enable the EMAC */ ++#define EMAC_ECNTRL_SPEED 0x00000020 ++#define EMAC_ECNTRL_DBSWAP 0x00000100 ++ ++#define EMAC_X_WMRK_STRFWD 0x00000100 ++ ++#define EMAC_X_DES_ACTIVE_TDAR 0x01000000 ++#define EMAC_R_DES_ACTIVE_RDAR 0x01000000 ++ ++ ++ ++/* The possible operating speeds of the MAC, currently supporting 10, 100 and ++ * 1000Mb modes. ++ */ ++typedef enum {SPEED_10M, SPEED_100M, SPEED_1000M, SPEED_1000M_PCS} MAC_SPEED; ++ ++#define GMII 1 ++#define MII 2 ++#define RMII 3 ++#define RGMII 4 ++#define SGMII 5 ++ ++#define DUPLEX_HALF 0x00 ++#define DUPLEX_FULL 0x01 ++ ++ ++/* Default configuration */ ++#define EMAC0_DEFAULT_DUPLEX_MODE FULLDUPLEX ++#define EMAC0_DEFAULT_EMAC_MODE RGMII ++#define EMAC0_DEFAULT_EMAC_SPEED SPEED_1000M ++ ++#define EMAC1_DEFAULT_DUPLEX_MODE FULLDUPLEX ++#define EMAC1_DEFAULT_EMAC_MODE SGMII ++#define EMAC1_DEFAULT_EMAC_SPEED SPEED_1000M ++ ++/* MII-related definitios */ ++#define EMAC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ ++#define EMAC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ ++#define EMAC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ ++#define EMAC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ ++#define EMAC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ ++#define EMAC_MII_DATA_TA 0x00020000 /* Turnaround */ ++#define EMAC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ ++ ++#define EMAC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ ++#define EMAC_MII_DATA_RA_MASK 0x1F /* MII Register address mask */ ++#define EMAC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ ++#define EMAC_MII_DATA_PA_MASK 0x1F /* MII PHY address mask */ ++ ++#define EMAC_MII_DATA_RA(v) ((v & EMAC_MII_DATA_RA_MASK) << EMAC_MII_DATA_RA_SHIFT) ++#define EMAC_MII_DATA_PA(v) ((v & EMAC_MII_DATA_RA_MASK) << EMAC_MII_DATA_PA_SHIFT) ++#define EMAC_MII_DATA(v) (v & 0xffff) ++ ++#define EMAC_MII_SPEED_SHIFT 1 ++#define EMAC_HOLDTIME_SHIFT 8 ++#define EMAC_HOLDTIME_MASK 0x7 ++#define EMAC_HOLDTIME(v) ((v & EMAC_HOLDTIME_MASK) << EMAC_HOLDTIME_SHIFT) ++ ++/* The Address organisation for the MAC device. All addresses are split into ++ * two 32-bit register fields. The first one (bottom) is the lower 32-bits of ++ * the address and the other field are the high order bits - this may be 16-bits ++ * in the case of MAC addresses, or 32-bits for the hash address. ++ * In terms of memory storage, the first item (bottom) is assumed to be at a ++ * lower address location than 'top'. i.e. top should be at address location of ++ * 'bottom' + 4 bytes. ++ */ ++typedef struct { ++ u32 bottom; /* Lower 32-bits of address. */ ++ u32 top; /* Upper 32-bits of address. */ ++} MAC_ADDR; ++ ++ ++/* The following is the organisation of the address filters section of the MAC ++ * registers. The Cadence MAC contains four possible specific address match ++ * addresses, if an incoming frame corresponds to any one of these four ++ * addresses then the frame will be copied to memory. ++ * It is not necessary for all four of the address match registers to be ++ * programmed, this is application dependant. ++ */ ++typedef struct { ++ MAC_ADDR one; /* Specific address register 1. */ ++ MAC_ADDR two; /* Specific address register 2. */ ++ MAC_ADDR three; /* Specific address register 3. */ ++ MAC_ADDR four; /* Specific address register 4. */ ++} SPEC_ADDR; ++ ++typedef struct { ++ u32 mode; ++ u32 speed; ++ u32 duplex; ++} GEMAC_CFG; ++ ++/* EMAC Hash size */ ++#define EMAC_HASH_REG_BITS 64 ++ ++#define EMAC_SPEC_ADDR_MAX 4 ++ ++#endif /* _EMAC_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h +@@ -0,0 +1,78 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _GPI_H_ ++#define _GPI_H_ ++ ++#define GPI_VERSION 0x00 ++#define GPI_CTRL 0x04 ++#define GPI_RX_CONFIG 0x08 ++#define GPI_HDR_SIZE 0x0c ++#define GPI_BUF_SIZE 0x10 ++#define GPI_LMEM_ALLOC_ADDR 0x14 ++#define GPI_LMEM_FREE_ADDR 0x18 ++#define GPI_DDR_ALLOC_ADDR 0x1c ++#define GPI_DDR_FREE_ADDR 0x20 ++#define GPI_CLASS_ADDR 0x24 ++#define GPI_DRX_FIFO 0x28 ++#define GPI_TRX_FIFO 0x2c ++#define GPI_INQ_PKTPTR 0x30 ++#define GPI_DDR_DATA_OFFSET 0x34 ++#define GPI_LMEM_DATA_OFFSET 0x38 ++#define GPI_TMLF_TX 0x4c ++#define GPI_DTX_ASEQ 0x50 ++#define GPI_FIFO_STATUS 0x54 ++#define GPI_FIFO_DEBUG 0x58 ++#define GPI_TX_PAUSE_TIME 0x5c ++#define GPI_LMEM_SEC_BUF_DATA_OFFSET 0x60 ++#define GPI_DDR_SEC_BUF_DATA_OFFSET 0x64 ++#define GPI_TOE_CHKSUM_EN 0x68 ++#define GPI_OVERRUN_DROPCNT 0x6c ++ ++typedef struct { ++ u32 lmem_rtry_cnt; ++ u32 tmlf_txthres; ++ u32 aseq_len; ++} GPI_CFG; ++ ++ ++/* GPI commons defines */ ++#define GPI_LMEM_BUF_EN 0x1 ++#define GPI_DDR_BUF_EN 0x1 ++ ++/* EGPI 1 defines */ ++#define EGPI1_LMEM_RTRY_CNT 0x40 ++#define EGPI1_TMLF_TXTHRES 0xBC ++#define EGPI1_ASEQ_LEN 0x50 ++ ++/* EGPI 2 defines */ ++#define EGPI2_LMEM_RTRY_CNT 0x40 ++#define EGPI2_TMLF_TXTHRES 0xBC ++#define EGPI2_ASEQ_LEN 0x40 ++ ++/* EGPI 3 defines */ ++#define EGPI3_LMEM_RTRY_CNT 0x40 ++#define EGPI3_TMLF_TXTHRES 0xBC ++#define EGPI3_ASEQ_LEN 0x40 ++ ++/* HGPI defines */ ++#define HGPI_LMEM_RTRY_CNT 0x40 ++#define HGPI_TMLF_TXTHRES 0xBC ++#define HGPI_ASEQ_LEN 0x40 ++ ++#endif /* _GPI_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/gpt.h +@@ -0,0 +1,29 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _CBUS_GPT_H_ ++#define _CBUS_GPT_H_ ++ ++#define CBUS_GPT_VERSION (CBUS_GPT_BASE_ADDR + 0x00) ++#define CBUS_GPT_STATUS (CBUS_GPT_BASE_ADDR + 0x04) ++#define CBUS_GPT_CONFIG (CBUS_GPT_BASE_ADDR + 0x08) ++#define CBUS_GPT_COUNTER (CBUS_GPT_BASE_ADDR + 0x0c) ++#define CBUS_GPT_PERIOD (CBUS_GPT_BASE_ADDR + 0x10) ++#define CBUS_GPT_WIDTH (CBUS_GPT_BASE_ADDR + 0x14) ++ ++#endif /* _CBUS_GPT_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h +@@ -0,0 +1,96 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _HIF_H_ ++#define _HIF_H_ ++ ++/** @file hif.h. ++ * hif - PFE hif block control and status register. Mapped on CBUS and accessible from all PE's and ARM. ++ */ ++#define HIF_VERSION (HIF_BASE_ADDR + 0x00) ++#define HIF_TX_CTRL (HIF_BASE_ADDR + 0x04) ++#define HIF_TX_CURR_BD_ADDR (HIF_BASE_ADDR + 0x08) ++#define HIF_TX_ALLOC (HIF_BASE_ADDR + 0x0c) ++#define HIF_TX_BDP_ADDR (HIF_BASE_ADDR + 0x10) ++#define HIF_TX_STATUS (HIF_BASE_ADDR + 0x14) ++#define HIF_RX_CTRL (HIF_BASE_ADDR + 0x20) ++#define HIF_RX_BDP_ADDR (HIF_BASE_ADDR + 0x24) ++#define HIF_RX_STATUS (HIF_BASE_ADDR + 0x30) ++#define HIF_INT_SRC (HIF_BASE_ADDR + 0x34) ++#define HIF_INT_ENABLE (HIF_BASE_ADDR + 0x38) ++#define HIF_POLL_CTRL (HIF_BASE_ADDR + 0x3c) ++#define HIF_RX_CURR_BD_ADDR (HIF_BASE_ADDR + 0x40) ++#define HIF_RX_ALLOC (HIF_BASE_ADDR + 0x44) ++#define HIF_TX_DMA_STATUS (HIF_BASE_ADDR + 0x48) ++#define HIF_RX_DMA_STATUS (HIF_BASE_ADDR + 0x4c) ++#define HIF_INT_COAL (HIF_BASE_ADDR + 0x50) ++ ++/*HIF_INT_SRC/ HIF_INT_ENABLE control bits */ ++#define HIF_INT (1 << 0) ++#define HIF_RXBD_INT (1 << 1) ++#define HIF_RXPKT_INT (1 << 2) ++#define HIF_TXBD_INT (1 << 3) ++#define HIF_TXPKT_INT (1 << 4) ++ ++/*HIF_TX_CTRL bits */ ++#define HIF_CTRL_DMA_EN (1<<0) ++#define HIF_CTRL_BDP_POLL_CTRL_EN (1<<1) ++#define HIF_CTRL_BDP_CH_START_WSTB (1<<2) ++ ++/*HIF_INT_ENABLE bits */ ++#define HIF_INT_EN (1 << 0) ++#define HIF_RXBD_INT_EN (1 << 1) ++#define HIF_RXPKT_INT_EN (1 << 2) ++#define HIF_TXBD_INT_EN (1 << 3) ++#define HIF_TXPKT_INT_EN (1 << 4) ++ ++/*HIF_POLL_CTRL bits*/ ++#define HIF_RX_POLL_CTRL_CYCLE 0x0400 ++#define HIF_TX_POLL_CTRL_CYCLE 0x0400 ++ ++/*HIF_INT_COAL bits*/ ++#define HIF_INT_COAL_ENABLE (1 << 31) ++ ++/*Buffer descriptor control bits */ ++#define BD_CTRL_BUFLEN_MASK 0x3fff ++#define BD_BUF_LEN(x) (x & BD_CTRL_BUFLEN_MASK) ++#define BD_CTRL_CBD_INT_EN (1 << 16) ++#define BD_CTRL_PKT_INT_EN (1 << 17) ++#define BD_CTRL_LIFM (1 << 18) ++#define BD_CTRL_LAST_BD (1 << 19) ++#define BD_CTRL_DIR (1 << 20) ++#define BD_CTRL_LMEM_CPY (1 << 21) /*Valid only for HIF_NOCPY*/ ++#define BD_CTRL_PKT_XFER (1 << 24) ++#define BD_CTRL_DESC_EN (1 << 31) ++#define BD_CTRL_PARSE_DISABLE (1 << 25) ++#define BD_CTRL_BRFETCH_DISABLE (1 << 26) ++#define BD_CTRL_RTFETCH_DISABLE (1 << 27) ++ ++/*Buffer descriptor status bits*/ ++#define BD_STATUS_CONN_ID(x) ((x) & 0xffff) ++#define BD_STATUS_DIR_PROC_ID (1 << 16) ++#define BD_STATUS_CONN_ID_EN (1 << 17)) ++#define BD_STATUS_PE2PROC_ID(x) (((x) & 7) << 18) ++#define BD_STATUS_LE_DATA (1 << 21) ++#define BD_STATUS_CHKSUM_EN (1 << 22) ++ ++/*HIF Buffer descriptor status bits */ ++#define DIR_PROC_ID (1 << 16) ++#define PROC_ID(id) ((id) << 18) ++ ++#endif /* _HIF_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h +@@ -0,0 +1,51 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _HIF_NOCPY_H_ ++#define _HIF_NOCPY_H_ ++ ++#define HIF_NOCPY_VERSION (HIF_NOCPY_BASE_ADDR + 0x00) ++#define HIF_NOCPY_TX_CTRL (HIF_NOCPY_BASE_ADDR + 0x04) ++#define HIF_NOCPY_TX_CURR_BD_ADDR (HIF_NOCPY_BASE_ADDR + 0x08) ++#define HIF_NOCPY_TX_ALLOC (HIF_NOCPY_BASE_ADDR + 0x0c) ++#define HIF_NOCPY_TX_BDP_ADDR (HIF_NOCPY_BASE_ADDR + 0x10) ++#define HIF_NOCPY_TX_STATUS (HIF_NOCPY_BASE_ADDR + 0x14) ++#define HIF_NOCPY_RX_CTRL (HIF_NOCPY_BASE_ADDR + 0x20) ++#define HIF_NOCPY_RX_BDP_ADDR (HIF_NOCPY_BASE_ADDR + 0x24) ++#define HIF_NOCPY_RX_STATUS (HIF_NOCPY_BASE_ADDR + 0x30) ++#define HIF_NOCPY_INT_SRC (HIF_NOCPY_BASE_ADDR + 0x34) ++#define HIF_NOCPY_INT_ENABLE (HIF_NOCPY_BASE_ADDR + 0x38) ++#define HIF_NOCPY_POLL_CTRL (HIF_NOCPY_BASE_ADDR + 0x3c) ++#define HIF_NOCPY_RX_CURR_BD_ADDR (HIF_NOCPY_BASE_ADDR + 0x40) ++#define HIF_NOCPY_RX_ALLOC (HIF_NOCPY_BASE_ADDR + 0x44) ++#define HIF_NOCPY_TX_DMA_STATUS (HIF_NOCPY_BASE_ADDR + 0x48) ++#define HIF_NOCPY_RX_DMA_STATUS (HIF_NOCPY_BASE_ADDR + 0x4c) ++#define HIF_NOCPY_RX_INQ0_PKTPTR (HIF_NOCPY_BASE_ADDR + 0x50) ++#define HIF_NOCPY_RX_INQ1_PKTPTR (HIF_NOCPY_BASE_ADDR + 0x54) ++#define HIF_NOCPY_TX_PORT_NO (HIF_NOCPY_BASE_ADDR + 0x60) ++#define HIF_NOCPY_LMEM_ALLOC_ADDR (HIF_NOCPY_BASE_ADDR + 0x64) ++#define HIF_NOCPY_CLASS_ADDR (HIF_NOCPY_BASE_ADDR + 0x68) ++#define HIF_NOCPY_TMU_PORT0_ADDR (HIF_NOCPY_BASE_ADDR + 0x70) ++#define HIF_NOCPY_TMU_PORT1_ADDR (HIF_NOCPY_BASE_ADDR + 0x74) ++#define HIF_NOCPY_TMU_PORT2_ADDR (HIF_NOCPY_BASE_ADDR + 0x7c) ++#define HIF_NOCPY_TMU_PORT3_ADDR (HIF_NOCPY_BASE_ADDR + 0x80) ++#define HIF_NOCPY_TMU_PORT4_ADDR (HIF_NOCPY_BASE_ADDR + 0x84) ++#define HIF_NOCPY_INT_COAL (HIF_NOCPY_BASE_ADDR + 0x90) ++ ++ ++#endif /* _HIF_NOCPY_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h +@@ -0,0 +1,128 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _TMU_CSR_H_ ++#define _TMU_CSR_H_ ++ ++#define TMU_VERSION (TMU_CSR_BASE_ADDR + 0x000) ++#define TMU_INQ_WATERMARK (TMU_CSR_BASE_ADDR + 0x004) ++#define TMU_PHY_INQ_PKTPTR (TMU_CSR_BASE_ADDR + 0x008) ++#define TMU_PHY_INQ_PKTINFO (TMU_CSR_BASE_ADDR + 0x00c) ++#define TMU_PHY_INQ_FIFO_CNT (TMU_CSR_BASE_ADDR + 0x010) ++#define TMU_SYS_GENERIC_CONTROL (TMU_CSR_BASE_ADDR + 0x014) ++#define TMU_SYS_GENERIC_STATUS (TMU_CSR_BASE_ADDR + 0x018) ++#define TMU_SYS_GEN_CON0 (TMU_CSR_BASE_ADDR + 0x01c) ++#define TMU_SYS_GEN_CON1 (TMU_CSR_BASE_ADDR + 0x020) ++#define TMU_SYS_GEN_CON2 (TMU_CSR_BASE_ADDR + 0x024) ++#define TMU_SYS_GEN_CON3 (TMU_CSR_BASE_ADDR + 0x028) ++#define TMU_SYS_GEN_CON4 (TMU_CSR_BASE_ADDR + 0x02c) ++#define TMU_TEQ_DISABLE_DROPCHK (TMU_CSR_BASE_ADDR + 0x030) ++#define TMU_TEQ_CTRL (TMU_CSR_BASE_ADDR + 0x034) ++#define TMU_TEQ_QCFG (TMU_CSR_BASE_ADDR + 0x038) ++#define TMU_TEQ_DROP_STAT (TMU_CSR_BASE_ADDR + 0x03c) ++#define TMU_TEQ_QAVG (TMU_CSR_BASE_ADDR + 0x040) ++#define TMU_TEQ_WREG_PROB (TMU_CSR_BASE_ADDR + 0x044) ++#define TMU_TEQ_TRANS_STAT (TMU_CSR_BASE_ADDR + 0x048) ++#define TMU_TEQ_HW_PROB_CFG0 (TMU_CSR_BASE_ADDR + 0x04c) ++#define TMU_TEQ_HW_PROB_CFG1 (TMU_CSR_BASE_ADDR + 0x050) ++#define TMU_TEQ_HW_PROB_CFG2 (TMU_CSR_BASE_ADDR + 0x054) ++#define TMU_TEQ_HW_PROB_CFG3 (TMU_CSR_BASE_ADDR + 0x058) ++#define TMU_TEQ_HW_PROB_CFG4 (TMU_CSR_BASE_ADDR + 0x05c) ++#define TMU_TEQ_HW_PROB_CFG5 (TMU_CSR_BASE_ADDR + 0x060) ++#define TMU_TEQ_HW_PROB_CFG6 (TMU_CSR_BASE_ADDR + 0x064) ++#define TMU_TEQ_HW_PROB_CFG7 (TMU_CSR_BASE_ADDR + 0x068) ++#define TMU_TEQ_HW_PROB_CFG8 (TMU_CSR_BASE_ADDR + 0x06c) ++#define TMU_TEQ_HW_PROB_CFG9 (TMU_CSR_BASE_ADDR + 0x070) ++#define TMU_TEQ_HW_PROB_CFG10 (TMU_CSR_BASE_ADDR + 0x074) ++#define TMU_TEQ_HW_PROB_CFG11 (TMU_CSR_BASE_ADDR + 0x078) ++#define TMU_TEQ_HW_PROB_CFG12 (TMU_CSR_BASE_ADDR + 0x07c) ++#define TMU_TEQ_HW_PROB_CFG13 (TMU_CSR_BASE_ADDR + 0x080) ++#define TMU_TEQ_HW_PROB_CFG14 (TMU_CSR_BASE_ADDR + 0x084) ++#define TMU_TEQ_HW_PROB_CFG15 (TMU_CSR_BASE_ADDR + 0x088) ++#define TMU_TEQ_HW_PROB_CFG16 (TMU_CSR_BASE_ADDR + 0x08c) ++#define TMU_TEQ_HW_PROB_CFG17 (TMU_CSR_BASE_ADDR + 0x090) ++#define TMU_TEQ_HW_PROB_CFG18 (TMU_CSR_BASE_ADDR + 0x094) ++#define TMU_TEQ_HW_PROB_CFG19 (TMU_CSR_BASE_ADDR + 0x098) ++#define TMU_TEQ_HW_PROB_CFG20 (TMU_CSR_BASE_ADDR + 0x09c) ++#define TMU_TEQ_HW_PROB_CFG21 (TMU_CSR_BASE_ADDR + 0x0a0) ++#define TMU_TEQ_HW_PROB_CFG22 (TMU_CSR_BASE_ADDR + 0x0a4) ++#define TMU_TEQ_HW_PROB_CFG23 (TMU_CSR_BASE_ADDR + 0x0a8) ++#define TMU_TEQ_HW_PROB_CFG24 (TMU_CSR_BASE_ADDR + 0x0ac) ++#define TMU_TEQ_HW_PROB_CFG25 (TMU_CSR_BASE_ADDR + 0x0b0) ++#define TMU_TDQ_IIFG_CFG (TMU_CSR_BASE_ADDR + 0x0b4) ++#define TMU_TDQ0_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x0b8) /**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY0 */ ++#define TMU_LLM_CTRL (TMU_CSR_BASE_ADDR + 0x0bc) ++#define TMU_LLM_BASE_ADDR (TMU_CSR_BASE_ADDR + 0x0c0) ++#define TMU_LLM_QUE_LEN (TMU_CSR_BASE_ADDR + 0x0c4) ++#define TMU_LLM_QUE_HEADPTR (TMU_CSR_BASE_ADDR + 0x0c8) ++#define TMU_LLM_QUE_TAILPTR (TMU_CSR_BASE_ADDR + 0x0cc) ++#define TMU_LLM_QUE_DROPCNT (TMU_CSR_BASE_ADDR + 0x0d0) ++#define TMU_INT_EN (TMU_CSR_BASE_ADDR + 0x0d4) ++#define TMU_INT_SRC (TMU_CSR_BASE_ADDR + 0x0d8) ++#define TMU_INQ_STAT (TMU_CSR_BASE_ADDR + 0x0dc) ++#define TMU_CTRL (TMU_CSR_BASE_ADDR + 0x0e0) ++ ++#define TMU_MEM_ACCESS_ADDR (TMU_CSR_BASE_ADDR + 0x0e4) /**< [31] Mem Access Command. 0 = Internal Memory Read, 1 = Internal memory Write [27:24] Byte Enables of the Internal memory access [23:0] Address of the internal memory. This address is used to access both the PM and DM of all the PE's */ ++#define TMU_MEM_ACCESS_WDATA (TMU_CSR_BASE_ADDR + 0x0e8) /**< Internal Memory Access Write Data */ ++#define TMU_MEM_ACCESS_RDATA (TMU_CSR_BASE_ADDR + 0x0ec) /**< Internal Memory Access Read Data. The commands are blocked at the mem_access only */ ++ ++#define TMU_PHY0_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0f0) /**< [31:0] PHY0 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */ ++#define TMU_PHY1_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0f4) /**< [31:0] PHY1 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */ ++#define TMU_PHY2_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0f8) /**< [31:0] PHY2 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */ ++#define TMU_PHY3_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0fc) /**< [31:0] PHY3 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */ ++#define TMU_BMU_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x100) ++#define TMU_TX_CTRL (TMU_CSR_BASE_ADDR + 0x104) ++ ++#define TMU_BUS_ACCESS_WDATA (TMU_CSR_BASE_ADDR + 0x108) ++#define TMU_BUS_ACCESS (TMU_CSR_BASE_ADDR + 0x10c) ++#define TMU_BUS_ACCESS_RDATA (TMU_CSR_BASE_ADDR + 0x110) ++ ++#define TMU_PE_SYS_CLK_RATIO (TMU_CSR_BASE_ADDR + 0x114) ++#define TMU_PE_STATUS (TMU_CSR_BASE_ADDR + 0x118) ++#define TMU_TEQ_MAX_THRESHOLD (TMU_CSR_BASE_ADDR + 0x11c) ++#define TMU_PHY4_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x134) /**< [31:0] PHY4 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */ ++#define TMU_TDQ1_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x138) /**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY1 */ ++#define TMU_TDQ2_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x13c) /**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY2 */ ++#define TMU_TDQ3_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x140) /**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY3 */ ++#define TMU_BMU_BUF_SIZE (TMU_CSR_BASE_ADDR + 0x144) ++#define TMU_PHY5_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x148) /**< [31:0] PHY5 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */ ++ ++#define SW_RESET (1 << 0) /**< Global software reset */ ++#define INQ_RESET (1 << 2) ++#define TEQ_RESET (1 << 3) ++#define TDQ_RESET (1 << 4) ++#define PE_RESET (1 << 5) ++#define MEM_INIT (1 << 6) ++#define MEM_INIT_DONE (1 << 7) ++#define LLM_INIT (1 << 8) ++#define LLM_INIT_DONE (1 << 9) ++#define ECC_MEM_INIT_DONE (1<<10) ++ ++typedef struct { ++ u32 pe_sys_clk_ratio; ++ unsigned long llm_base_addr; ++ u32 llm_queue_len; ++} TMU_CFG; ++ ++/* Not HW related for pfe_ctrl / pfe common defines */ ++#define DEFAULT_MAX_QDEPTH 80 ++#define DEFAULT_Q0_QDEPTH 511 //We keep one large queue for host tx qos ++#define DEFAULT_TMU3_QDEPTH 127 ++ ++ ++#endif /* _TMU_CSR_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h +@@ -0,0 +1,61 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _UTIL_CSR_H_ ++#define _UTIL_CSR_H_ ++ ++#define UTIL_VERSION (UTIL_CSR_BASE_ADDR + 0x000) ++#define UTIL_TX_CTRL (UTIL_CSR_BASE_ADDR + 0x004) ++#define UTIL_INQ_PKTPTR (UTIL_CSR_BASE_ADDR + 0x010) ++ ++#define UTIL_HDR_SIZE (UTIL_CSR_BASE_ADDR + 0x014) ++ ++#define UTIL_PE0_QB_DM_ADDR0 (UTIL_CSR_BASE_ADDR + 0x020) ++#define UTIL_PE0_QB_DM_ADDR1 (UTIL_CSR_BASE_ADDR + 0x024) ++#define UTIL_PE0_RO_DM_ADDR0 (UTIL_CSR_BASE_ADDR + 0x060) ++#define UTIL_PE0_RO_DM_ADDR1 (UTIL_CSR_BASE_ADDR + 0x064) ++ ++#define UTIL_MEM_ACCESS_ADDR (UTIL_CSR_BASE_ADDR + 0x100) ++#define UTIL_MEM_ACCESS_WDATA (UTIL_CSR_BASE_ADDR + 0x104) ++#define UTIL_MEM_ACCESS_RDATA (UTIL_CSR_BASE_ADDR + 0x108) ++ ++#define UTIL_TM_INQ_ADDR (UTIL_CSR_BASE_ADDR + 0x114) ++#define UTIL_PE_STATUS (UTIL_CSR_BASE_ADDR + 0x118) ++ ++#define UTIL_PE_SYS_CLK_RATIO (UTIL_CSR_BASE_ADDR + 0x200) ++#define UTIL_AFULL_THRES (UTIL_CSR_BASE_ADDR + 0x204) ++#define UTIL_GAP_BETWEEN_READS (UTIL_CSR_BASE_ADDR + 0x208) ++#define UTIL_MAX_BUF_CNT (UTIL_CSR_BASE_ADDR + 0x20c) ++#define UTIL_TSQ_FIFO_THRES (UTIL_CSR_BASE_ADDR + 0x210) ++#define UTIL_TSQ_MAX_CNT (UTIL_CSR_BASE_ADDR + 0x214) ++#define UTIL_IRAM_DATA_0 (UTIL_CSR_BASE_ADDR + 0x218) ++#define UTIL_IRAM_DATA_1 (UTIL_CSR_BASE_ADDR + 0x21c) ++#define UTIL_IRAM_DATA_2 (UTIL_CSR_BASE_ADDR + 0x220) ++#define UTIL_IRAM_DATA_3 (UTIL_CSR_BASE_ADDR + 0x224) ++ ++#define UTIL_BUS_ACCESS_ADDR (UTIL_CSR_BASE_ADDR + 0x228) ++#define UTIL_BUS_ACCESS_WDATA (UTIL_CSR_BASE_ADDR + 0x22c) ++#define UTIL_BUS_ACCESS_RDATA (UTIL_CSR_BASE_ADDR + 0x230) ++ ++#define UTIL_INQ_AFULL_THRES (UTIL_CSR_BASE_ADDR + 0x234) ++ ++typedef struct { ++ u32 pe_sys_clk_ratio; ++} UTIL_CFG; ++ ++#endif /* _UTIL_CSR_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/class.h +@@ -0,0 +1,133 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _CLASS_H_ ++#define _CLASS_H_ ++ ++#include "pe.h" ++ ++#define CLASS_DMEM_BASE_ADDR 0x00000000 ++#define CLASS_DMEM_SIZE 0x2000 ++#define CLASS_DMEM_END (CLASS_DMEM_BASE_ADDR + CLASS_DMEM_SIZE) ++#define CLASS_PMEM_BASE_ADDR 0x00010000 ++ ++#define CBUS_BASE_ADDR 0xc0000000 ++#define CLASS_APB_BASE_ADDR 0xc1000000 ++#define CLASS_AHB1_BASE_ADDR 0xc2000000 ++#define CLASS_AHB2_BASE_ADDR 0xc3000000 ++ ++#include "cbus.h" ++ ++#define GPT_BASE_ADDR (CLASS_APB_BASE_ADDR + 0x00000) ++#define UART_BASE_ADDR (CLASS_APB_BASE_ADDR + 0x10000) ++#define PERG_BASE_ADDR (CLASS_APB_BASE_ADDR + 0x20000) ++#define EFET_BASE_ADDR (CLASS_APB_BASE_ADDR + 0x40000) ++ ++#define MAC_HASH_BASE_ADDR (CLASS_AHB1_BASE_ADDR + 0x30000) ++#define VLAN_HASH_BASE_ADDR (CLASS_AHB1_BASE_ADDR + 0x50000) ++ ++#define PE_LMEM_BASE_ADDR (CLASS_AHB2_BASE_ADDR + 0x10000) ++#define PE_LMEM_SIZE 0x8000 ++#define PE_LMEM_END (PE_LMEM_BASE_ADDR + PE_LMEM_SIZE) ++#define CCU_BASE_ADDR (CLASS_AHB2_BASE_ADDR + 0x20000) ++ ++#define IS_DMEM(addr, len) (((unsigned long)(addr) >= CLASS_DMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= CLASS_DMEM_END)) ++#define IS_PE_LMEM(addr, len) (((unsigned long)(addr) >= PE_LMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= PE_LMEM_END)) ++ ++ ++#include "gpt.h" ++#include "uart.h" ++#include "class/perg.h" ++#include "class/efet.h" ++#include "class/mac_hash.h" ++#include "class/vlan_hash.h" ++#include "class/ccu.h" ++ ++ ++#define CLASS_MAX_PBUFFERS 4 ++ ++#define PBUF_HWPARSE_OFFSET 0x10 /* Fixed by hardware */ ++ ++#define PAYLOAD_DMEM_MAX_SIZE (CLASS_PBUF_SIZE - CLASS_PBUF_HEADER_OFFSET - sizeof(class_rx_hdr_t)) ++ ++ ++#define MIN_PKT_SIZE 56 ++ ++#define PARSE_ETH_TYPE (1 << 0) ++#define PARSE_VLAN_TYPE (1 << 1) ++#define PARSE_PPPOE_TYPE (1 << 2) ++#define PARSE_ARP_TYPE (1 << 3) ++#define PARSE_MCAST_TYPE (1 << 4) ++#define PARSE_IP_TYPE (1 << 5) ++#define PARSE_IPV6_TYPE (1 << 6) ++#define PARSE_IPV4_TYPE (1 << 7) ++ ++#define PARSE_IPX_TYPE (1 << 9) ++ ++#define PARSE_UDP_FLOW (1 << 11) ++#define PARSE_TCP_FLOW (1 << 12) ++#define PARSE_ICMP_FLOW (1 << 13) ++#define PARSE_IGMP_FLOW (1 << 14) ++#define PARSE_FRAG_FLOW (1 << 15) ++ ++#define PARSE_HIF_PKT (1 << 23) ++#define PARSE_ARC_HIT (1 << 24) ++#define PARSE_PKT_OVERFLOW (1 << 25) ++ ++#define PARSE_PROTO_MISMATCH (1 << 28) ++#define PARSE_L3_MISMATCH (1 << 29) ++#define PARSE_L2_MISMATCH (1 << 30) ++#define PARSE_INCOMPLETE (1 << 31) ++ ++ ++typedef struct _hwparse_t { ++ u16 sid; ++ u16 connid; ++ u8 toevec; ++ u8 pLayer2Hdr; ++ u8 pLayer3Hdr; ++ u8 pLayer4Hdr; ++ u16 vlanid; ++ u16 ifParseFlags; ++ u32 parseFlags; ++ u16 srcport; ++ u16 dstport; ++ u32 proto:8; ++ u32 port:4; ++ u32 hash:20; ++ u64 rte_res_valid:1; ++ u64 vlan_res_valid:1; ++ u64 dst_res_valid:1; ++ u64 src_res_valid:1; ++ u64 vlan_lookup:20; ++ u64 dst_lookup:20; ++ u64 src_lookup:20; ++} hwparse_t; ++ ++ ++typedef struct { ++ u8 num_cpy; /* no of copies to send out from RO block, for each there must be a corresponding tx pre-header */ ++ u8 dma_len; /* len to be DMAed to DDR mem, including all tx pre-headers */ ++ u16 src_addr; /* class dmem source address, pointing to first tx pre-header */ ++ u32 dst_addr; /* DDR memory destination address of first tx pre-header, must be so packet data is continuous in DDR */ ++ u32 res1; /* reserved for software usage - queue number? */ ++ u16 res2; /* reserved for software usage */ ++ u16 tsv; /* time stamp val */ ++} class_tx_desc_t; ++ ++#endif /* _CLASS_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/class/ccu.h +@@ -0,0 +1,28 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _CCU_H_ ++#define _CCU_H_ ++ ++#define CCU_ADDR (CCU_BASE_ADDR + 0x00) ++#define CCU_CNT (CCU_BASE_ADDR + 0x04) ++#define CCU_STATUS (CCU_BASE_ADDR + 0x08) ++#define CCU_VAL (CCU_BASE_ADDR + 0x0c) ++ ++#endif /* _CCU_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/class/efet.h +@@ -0,0 +1,44 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _CLASS_EFET_H_ ++#define _CLASS_EFET_H_ ++ ++//#define CLASS_EFET_ASYNC 1 ++ ++#define CLASS_EFET_ENTRY_ADDR (EFET_BASE_ADDR + 0x00) ++#define CLASS_EFET_ENTRY_SIZE (EFET_BASE_ADDR + 0x04) ++#define CLASS_EFET_ENTRY_DMEM_ADDR (EFET_BASE_ADDR + 0x08) ++#define CLASS_EFET_ENTRY_STATUS (EFET_BASE_ADDR + 0x0c) ++#define CLASS_EFET_ENTRY_ENDIAN (EFET_BASE_ADDR + 0x10) ++ ++#define CBUS2DMEM 0 ++#define DMEM2CBUS 1 ++ ++#define EFET2BUS_LE (1 << 0) ++#define PE2BUS_LE (1 << 1) ++ ++#ifdef CLASS_EFET_ASYNC ++void class_efet_async(u32 cbus_addr, u32 dmem_addr, u32 len, u32 dir); ++#endif ++ ++void class_efet_sync(u32 cbus_addr, u32 dmem_addr, u32 len, u32 dir); ++ ++ ++#endif /* _CLASS_EFET_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/class/mac_hash.h +@@ -0,0 +1,55 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _MAC_HASH_H_ ++#define _MAC_HASH_H_ ++ ++#define MAC_HASH_REQ1_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x000) ++#define MAC_HASH_REQ2_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x020) ++#define MAC_HASH_REQ3_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x040) ++#define MAC_HASH_REQ4_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x060) ++#define MAC_HASH_REQ5_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x080) ++#define MAC_HASH_REQ6_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x0a0) ++#define MAC_HASH_REQ7_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x0c0) ++#define MAC_HASH_REQ8_BASE_ADDR (MAC_HASH_BASE_ADDR + 0x0e0) ++ ++#define MAC_HASH_REQ_CMD(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x000) ++#define MAC_HASH_REQ_MAC1_ADDR(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x004) ++#define MAC_HASH_REQ_MAC2_ADDR(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x008) ++#define MAC_HASH_REQ_MASK1_ADDR(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x00c) ++#define MAC_HASH_REQ_MASK2_ADDR(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x010) ++#define MAC_HASH_REQ_ENTRY(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x014) ++#define MAC_HASH_REQ_STATUS(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x018) ++#define MAC_HASH_REQ_ENTRY_MAYCH(i) (MAC_HASH_REQ##i##_BASE_ADDR + 0x01c) ++ ++ ++#define MAC_HASH_FREELIST_PTR_HEAD (MAC_HASH_BASE_ADDR + 0x100) ++#define MAC_HASH_FREELIST_PTR_TAIL (MAC_HASH_BASE_ADDR + 0x104) ++#define MAC_HASH_FREELIST_ENTRIES_ADDR (MAC_HASH_BASE_ADDR + 0x108) ++ ++ ++#define HASH_CMD_INIT 1 ++#define HASH_CMD_ADD 2 ++#define HASH_CMD_DELETE 3 ++#define HASH_CMD_UPDATE 4 ++#define HASH_CMD_SEARCH 5 ++#define HASH_CMD_MEM_READ 6 ++#define HASH_CMD_MEM_WRITE 7 ++ ++#endif /* _MAC_HASH_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/class/perg.h +@@ -0,0 +1,39 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _PERG_H_ ++#define _PERG_H_ ++ ++#define PERG_QB_BUF_STATUS (PERG_BASE_ADDR + 0x00) ++#define PERG_RO_BUF_STATUS (PERG_BASE_ADDR + 0x04) ++#define PERG_CLR_QB_BUF_STATUS (PERG_BASE_ADDR + 0x08) ++#define PERG_SET_RO_BUF_STATUS (PERG_BASE_ADDR + 0x0c) ++#define PERG_CLR_RO_ERR_PKT (PERG_BASE_ADDR + 0x10) ++#define PERG_CLR_BMU2_ERR_PKT (PERG_BASE_ADDR + 0x14) ++ ++#define PERG_ID (PERG_BASE_ADDR + 0x18) ++#define PERG_TIMER1 (PERG_BASE_ADDR + 0x1c) ++//FIXME #define PERG_TIMER2 (PERG_BASE_ADDR + 0x20) ++#define PERG_BMU1_CURRDEPTH (PERG_BASE_ADDR + 0x20) ++#define PERG_BMU2_CURRDEPTH (PERG_BASE_ADDR + 0x24) ++#define PERG_HOST_GP (PERG_BASE_ADDR + 0x2c) ++#define PERG_PE_GP (PERG_BASE_ADDR + 0x30) ++#define PERG_INT_ENABLE (PERG_BASE_ADDR + 0x34) ++#define PERG_INT_SRC (PERG_BASE_ADDR + 0x38) ++ ++#endif /* _PERG_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/class/vlan_hash.h +@@ -0,0 +1,46 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _VLAN_HASH_H_ ++#define _VLAN_HASH_H_ ++ ++#define VLAN_HASH_REQ1_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x000) ++#define VLAN_HASH_REQ2_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x020) ++#define VLAN_HASH_REQ3_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x040) ++#define VLAN_HASH_REQ4_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x060) ++#define VLAN_HASH_REQ5_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x080) ++#define VLAN_HASH_REQ6_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x0a0) ++#define VLAN_HASH_REQ7_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x0c0) ++#define VLAN_HASH_REQ8_BASE_ADDR (VLAN_HASH_BASE_ADDR + 0x0e0) ++ ++#define VLAN_HASH_REQ_CMD(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x000) ++#define VLAN_HASH_REQ_MAC1_ADDR(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x004) ++#define VLAN_HASH_REQ_MAC2_ADDR(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x008) ++#define VLAN_HASH_REQ_MASK1_ADDR(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x00c) ++#define VLAN_HASH_REQ_MASK2_ADDR(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x010) ++#define VLAN_HASH_REQ_ENTRY(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x014) ++#define VLAN_HASH_REQ_STATUS(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x018) ++#define VLAN_HASH_REQ_ENTRY_MAYCH(i) (VLAN_HASH_REQ##i##_BASE_ADDR + 0x01c) ++ ++ ++#define VLAN_HASH_FREELIST_PTR_HEAD (VLAN_HASH_BASE_ADDR + 0x100) ++#define VLAN_HASH_FREELIST_PTR_TAIL (VLAN_HASH_BASE_ADDR + 0x104) ++#define VLAN_HASH_FREELIST_ENTRIES_ADDR (VLAN_HASH_BASE_ADDR + 0x108) ++ ++#endif /* _VLAN_HASH_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/gpt.h +@@ -0,0 +1,44 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _GPT_H_ ++#define _GPT_H_ ++ ++#define GPT_VERSION (GPT_BASE_ADDR + 0x00) ++#define GPT_STATUS (GPT_BASE_ADDR + 0x04) ++#define GPT_CONFIG (GPT_BASE_ADDR + 0x08) ++#define GPT_COUNTER (GPT_BASE_ADDR + 0x0c) ++#define GPT_PERIOD (GPT_BASE_ADDR + 0x10) ++#define GPT_WIDTH (GPT_BASE_ADDR + 0x14) ++ ++/*** These bits are defined for GPT_STATUS register */ ++#define GPT_STAT_IRQ (1<<0) ++#define GPT_STAT_OVERFLOW_ERR (1<<4) ++#define GPT_STAT_TMR_ENABLE (1<<8) ++#define GPT_STAT_TMR_DISABLE (1<<9) ++ ++/*** These bits are defined for GPT_CONFIG register */ ++#define GPT_CONFIG_PWM_MODE 0x1 ++#define GPT_CONFIG_WCAP_MODE 0x2 ++#define GPT_CONFIG_CAP_PULSE_OUT (1<<2) ++#define GPT_CONFIG_PERIOD_CNT (1<<3) ++#define GPT_CONFIG_INTR_ENABLE (1<<4) ++#define GPT_CONFIG_AUX_SEL (1<<5) ++ ++ ++#endif /* _GPT_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/pe.h +@@ -0,0 +1,626 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _PE_H_ ++#define _PE_H_ ++ ++#include "hal.h" ++ ++#if defined(COMCERTO_2000_CLASS) ++#include "pfe/class.h" ++#elif defined(COMCERTO_2000_TMU) ++#include "pfe/tmu.h" ++#elif defined(COMCERTO_2000_UTIL) ++#include "pfe/util.h" ++#endif ++ ++enum { ++ CLASS0_ID = 0, ++ CLASS1_ID, ++ CLASS2_ID, ++ CLASS3_ID, ++ CLASS4_ID, ++ CLASS5_ID, ++ TMU0_ID, ++ TMU1_ID, ++ TMU2_ID, ++ TMU3_ID, ++ UTIL_ID, ++ MAX_PE ++}; ++#define PE_ID_ANY MAX_PE ++ ++/* Hardware definition of physical ports */ ++/* CLASS rx header phy number */ ++enum CLASS_RX_PHY { ++ RX_PHY_0 = 0x0, ++ RX_PHY_1, ++ RX_PHY_2, ++ RX_PHY_HIF, ++ RX_PHY_HIF_NOCPY, ++ RX_PHY_CLASS = 1 << 14, /**< Control bit (in PHYNO field) used to inform CLASS PE that packet comes from Class. */ ++ RX_PHY_UTIL = 1 << 15 /**< Control bit (in PHYNO field) used to inform CLASS PE that packet comes from UtilPE. */ ++}; ++ ++#define RX_PHY_SW_INPUT_PORT_OFFSET 11 /**< Offset in PHYNO field where the original input port will be stored for packets coming directly from software (UtilPE or Class). */ ++ ++ ++/* CLASS/TMU tx header phy number */ ++enum TMU_TX_PHY { ++ TX_PHY_TMU0 = 0x0, ++ TX_PHY_TMU1, ++ TX_PHY_TMU2, ++ TX_PHY_TMU3 ++}; ++ ++ ++// NOTE: Any changes to the following drop counter definitions must also ++// be reflected in the pfe/pfe.h file and in pfe_ctrl/pfe_sysfs.c. ++ ++#if defined(COMCERTO_2000_CLASS) ++ ++#define CLASS_DROP_ICC 0 ++#define CLASS_DROP_HOST_PKT_ERROR 1 ++#define CLASS_DROP_RX_ERROR 2 ++#define CLASS_DROP_IPSEC_OUT 3 ++#define CLASS_DROP_IPSEC_IN 4 ++#define CLASS_DROP_EXPT_IPSEC 5 ++#define CLASS_DROP_REASSEMBLY 6 ++#define CLASS_DROP_FRAGMENTER 7 ++#define CLASS_DROP_NATT 8 ++#define CLASS_DROP_SOCKET 9 ++#define CLASS_DROP_MULTICAST 10 ++#define CLASS_DROP_NATPT 11 ++#define CLASS_DROP_TX_DISABLE 12 ++ ++#define CLASS_NUM_DROP_COUNTERS 13 ++ ++extern U32 drop_counter[CLASS_NUM_DROP_COUNTERS]; ++#define DROP_PACKET(pmtd, counter) free_packet(pmtd, CLASS_DROP_##counter) ++#define DROP_BUFFER(addr, counter) free_buffer(addr, CLASS_DROP_##counter) ++ ++#elif defined(COMCERTO_2000_UTIL) ++ ++#define UTIL_DROP_IPSEC_OUT 0 ++#define UTIL_DROP_IPSEC_IN 1 ++#define UTIL_DROP_IPSEC_RATE_LIMIT 2 ++#define UTIL_DROP_FRAGMENTER 3 ++#define UTIL_DROP_SOCKET 4 ++#define UTIL_DROP_TX_DISABLE 5 ++#define UTIL_DROP_RX_ERROR 6 ++#define UTIL_DROP_NO_MTD 7 ++ ++#define UTIL_NUM_DROP_COUNTERS 8 ++ ++extern U32 drop_counter[UTIL_NUM_DROP_COUNTERS]; ++#define DROP_PACKET(pmtd, counter) free_packet(pmtd, UTIL_DROP_##counter) ++#define DROP_BUFFER(addr, counter) free_buffer(addr, UTIL_DROP_##counter) ++ ++#endif ++ ++ ++ ++#define DDR_BASE_ADDR 0x00020000 ++#define DDR_END 0x86000000 /* This includes ACP and IRAM areas */ ++#define IRAM_BASE_ADDR 0x83000000 ++ ++#define IS_DDR(addr, len) (((unsigned long)(addr) >= DDR_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= DDR_END)) ++/* action bits of act_phyno is defined as follows */ ++ ++#define ACT_SRC_MAC_REPLACE (1 << (4 + 0)) ++#define ACT_VLAN_ADD (1 << (4 + 1)) ++#define ACT_TCPCHKSUM_REPLACE (1 << (4 + 2)) ++#define ACT_VLAN_REPLACE (1 << (4 + 3)) ++#define ACT_DONT_FREE_BUFFER (1 << (4 + 5)) ++#define ACT_IPCHKSUM_REPLACE (1 << (4 + 6)) ++ ++typedef struct { ++ u8 start_data_off; /* packet data start offset, relative to start of this tx pre-header */ ++ u8 start_buf_off; /* this tx pre-header start offset, relative to start of DDR buffer */ ++ u16 pkt_length; /* total packet length */ ++ u8 act_phyno; /* action / phy number */ ++ u8 queueno; /* queueno */ ++ u16 unused; ++} class_tx_hdr_t; ++ ++typedef struct { ++ u8 start_data_off; /* packet data start offset, relative to start of this tx pre-header */ ++ u8 start_buf_off; /* this tx pre-header start offset, relative to start of DDR buffer */ ++ u16 pkt_length; /* total packet length */ ++ u8 act_phyno; /* action / phy number */ ++ u8 queueno; /* queueno */ ++ u16 src_mac_msb; /* indicates src_mac 47:32 */ ++ u32 src_mac_lsb; /* indicates src_mac 31:0 */ ++ u32 vlanid; /* vlanid */ ++} class_tx_hdr_mc_t; ++ ++typedef struct { ++ u32 next_ptr; /* ptr to the start of the first DDR buffer */ ++ u16 length; /* total packet length */ ++ u16 phyno; /* input physical port number */ ++ u32 status; /* gemac status bits bits[32:63]*/ ++ u32 status2; /* gemac status bits bits[0:31] */ ++} class_rx_hdr_t; ++/* class_rx_hdr status bits (status0 bits in hardware blocks) ++ * from hif_top/dma_dxr_dtx.v ++ * STATUS[9:0] is the encoding of bits in the LMEM buffer as seen by the QB block, ++ * NOT the encoding of bits as seen by the Class PEs in the DMEM rx header */ ++#define STATUS_PARSE_DISABLE (1 << 0) ++#define STATUS_BRFETCH_DISABLE (1 << 1) ++#define STATUS_RTFETCH_DISABLE (1 << 2) ++#define STATUS_DIR_PROC_ID (1 << 3) ++#define STATUS_CONN_ID_EN (1 << 4)) ++#define STATUS_PE2PROC_ID(x) (((x) & 7) << 5) ++#define STATUS_LE_DATA (1 << 8) ++#define STATUS_CHKSUM_EN (1 << 9) ++ ++/* from gpi/gpi_rmlf.v */ ++#define STATUS_CUMULATIVE_ERR (1 << 16) ++#define STATUS_LENGTH_ERR (1 << 17) ++#define STATUS_CRC_ERR (1 << 18) ++#define STATUS_TOO_SHORT_ERR (1 << 19) ++#define STATUS_TOO_LONG_ERR (1 << 20) ++#define STATUS_CODE_ERR (1 << 21) ++#define STATUS_MC_HASH_MATCH (1 << 22) ++#define STATUS_CUMULATIVE_ARC_HIT (1 << 23) ++#define STATUS_UNICAST_HASH_MATCH (1 << 24) ++#define STATUS_IP_CHECKSUM_CORRECT (1 << 25) ++#define STATUS_TCP_CHECKSUM_CORRECT (1 << 26) ++#define STATUS_UDP_CHECKSUM_CORRECT (1 << 27) ++#define STATUS_OVERFLOW_ERR (1 << 28) ++ ++#define UTIL_MAGIC_NUM 0xffd8ffe000104a46 ++#define UTIL_DDRC_WA ++ ++/* The following structure is filled by class-pe when the packet ++ * has to be sent to util-pe, by filling the required information */ ++typedef struct { ++ u32 mtd_flags : 16; ++ u32 packet_type : 8; ++ u32 input_port : 4; ++ u32 data_offset : 4; ++ u32 word[MTD_PRIV]; ++#ifdef UTIL_DDRC_WA ++ u64 magic_num; // magic_number to verify the data validity in utilpe ++#endif ++} __attribute__((aligned(8))) util_rx_hdr_t; // Size must be a multiple of 64-bit to allow copies using EFET. ++ ++#define UTIL_RX_IPS_IN_PKT EVENT_IPS_IN ++#define UTIL_RX_IPS_OUT_PKT EVENT_IPS_OUT ++#define UTIL_RX_RTP_PKT EVENT_RTP_RELAY ++#define UTIL_RX_RTP_QOS_PKT EVENT_RTP_QOS ++#define UTIL_RX_FRAG4_PKT EVENT_FRAG4 ++#define UTIL_RX_FRAG6_PKT EVENT_FRAG6 ++ ++/** Structure passed from UtilPE to Class, stored at the end of the LMEM buffer. Defined and used by software only. ++ * ++ */ ++ ++typedef struct ++{ ++ void *next; ++ u16 next_length; ++ u8 next_l3offset; ++ u8 next_l4offset; ++} frag_info; ++ ++typedef struct { ++ u8 packet_type : 6; ++ u8 padding : 2; ++ ++ u8 offset : 3; ++ u8 ddr_offset : 5; ++ ++ u16 mtd_flags; ++ union { ++ u16 half[6]; ++ u8 byte[12]; ++ ++ struct { ++ u16 sa_handle[2]; // SA_MAX_OP value should be used here instead of 2 ++ u8 proto; ++ S8 sa_op; ++ u8 l2hdr_len; ++ u8 adj_dmem; ++ } ipsec; ++ ++ struct { ++ u16 l4offset; ++ u16 socket_id; ++ BOOL update; ++ u8 reserved; ++ u32 payload_diff; ++ } relay; ++ ++ struct { ++ u16 l3offset; ++ u16 l4offset; ++ ++ frag_info frag; ++ } ipv6; ++ ++ struct { ++ u16 l3offset; ++ } ipv4; ++ ++ struct { ++ u32 ddr_addr; ++ u16 length; ++ u8 port; ++ u8 queue; ++ u8 action; ++ } tx; ++ }; ++} lmem_trailer_t; ++ ++/* The following values are defined for packet_type of lmem_trailer_t. ++ * These represent different types of packets sent from util to class ++ * for processing */ ++enum { ++ UTIL_TX_IPS_IN = 0, ++ UTIL_TX_IPV4_RTP_PKT, ++ UTIL_TX_IPV6_RTP_PKT, ++ UTIL_TX_IPV4_PKT, ++ UTIL_TX_IPV6_PKT, ++ UTIL_TX_EXPT_PKT, ++#ifdef CFG_PCAP ++ UTIL_TX_PKT, ++#endif ++ UTIL_TX_MAX_PKT ++}; ++ ++ ++#define UTIL_TX_TRAILER_SIZE sizeof(lmem_trailer_t) ++#define UTIL_TX_TRAILER(mtd) ((lmem_trailer_t *)ROUND_UP32((u32)(mtd)->rx_dmem_end)) ++ ++typedef struct { ++ u32 pkt_ptr; ++ u8 phyno; ++ u8 queueno; ++ u16 len; ++} tmu_tx_hdr_t; ++ ++struct hif_pkt_hdr { ++ u8 client_id; ++ u8 qNo; ++ u16 client_ctrl_le_lsw; ++ u16 client_ctrl_le_msw; ++}; ++ ++ ++#if defined(CFG_WIFI_OFFLOAD) ++#define MAX_WIFI_VAPS 3 ++#define PFE_WIFI_PKT_HEADROOM 96 /*PFE inserts this headroom for WiFi tx packets only in lro mode */ ++#else ++#define MAX_WIFI_VAPS 0 ++#endif ++ ++/* HIF header client id */ ++enum HIF_CLIENT_ID { ++ CLIENT_ID_GEM0 = 0, ++ CLIENT_ID_GEM1, ++ CLIENT_ID_GEM2, ++ CLIENT_ID_WIFI0, ++ CLIENT_ID_WIFI_LAST = MAX_WIFI_VAPS + CLIENT_ID_GEM2, ++ CLIENT_ID_PCAP, ++ CLIENT_ID_UNKNOWN = 0xff, ++}; ++ ++ ++#define IS_WIFI_CLIENT_ID(_clid) (((_clid) >= CLIENT_ID_WIFI0) && ((_clid) <= CLIENT_ID_WIFI_LAST)) ++ ++/* These match LE definition */ ++#define HIF_CTRL_TX_TSO_NOCPY __cpu_to_le32(1 << 8) ++#define HIF_CTRL_TX_IPSEC_OUT __cpu_to_le32(1 << 7) ++#define HIF_CTRL_TX_WIFI_OWNMAC __cpu_to_le32(1 << 6) ++#define HIF_CTRL_TX_TSO_END __cpu_to_le32(1 << 5) ++#define HIF_CTRL_TX_TSO6 __cpu_to_le32(1 << 4) ++#define HIF_CTRL_TX_TSO __cpu_to_le32(1 << 3) ++#define HIF_CTRL_TX_CHECKSUM __cpu_to_le32(1 << 2) ++#define HIF_CTRL_TX_CSUM_VALIDATE __cpu_to_le32(1 << 1) ++#define HIF_CTRL_TX_WIFI_TXOFLD __cpu_to_le32(1 << 0) ++ ++#define HIF_CTRL_RX_OFFSET_MASK __cpu_to_le32(0xf << 24) ++#define HIF_CTRL_RX_PE_ID_MASK __cpu_to_le32(0xf << 16) ++#define HIF_CTRL_RX_IPSEC_IN __cpu_to_le32(1 << 4) ++#define HIF_CTRL_RX_WIFI_EXPT __cpu_to_le32(1 << 3) ++#define HIF_CTRL_RX_CHECKSUMMED __cpu_to_le32(1 << 2) ++#define HIF_CTRL_RX_CONTINUED __cpu_to_le32(1 << 1) ++#define HIF_CTRL_RX_WIFI_HEADROOM __cpu_to_le32(1 << 0) ++ ++#ifdef CFG_LRO ++struct hif_lro_hdr { ++ u16 data_offset; ++ u16 mss; ++}; ++#endif ++ ++struct hif_ipsec_hdr { ++ u16 sa_handle[2]; ++}; ++ ++#define MAX_TSO_BUF_DESCS 5 ++struct hif_tso_buf_desc { ++ u32 addr; ++ u32 ctrl; ++#define TSO_CTRL_LAST_BUFFER (1 << 31) ++}; ++ ++struct hif_tso_hdr { ++ u16 ip_off; ++ u16 ip_id; ++ u16 ip_len; ++ u16 tcp_off; ++ u32 tcp_seq; ++}; ++ ++struct hif_tso_hdr_nocpy { ++ u16 ip_off; ++ u16 ip_id; ++ u16 ip_len; ++ u16 tcp_off; ++ u32 tcp_seq; ++ struct hif_tso_buf_desc bdesc[MAX_TSO_BUF_DESCS]; ++}; ++ ++struct hif_pcap_hdr { ++ u8 ifindex; ++ u8 unused; ++ u16 seqno; ++ u32 timestamp; ++}; ++ ++ ++struct pe_sync_mailbox ++{ ++ u32 stop; ++ u32 stopped; ++}; ++ ++struct pe_msg_mailbox ++{ ++ u32 dst; ++ u32 src; ++ u32 len; ++ u32 request; ++}; ++ ++ ++/** Basic busy loop delay function ++* ++* @param cycles Number of cycles to delay (actual cpu cycles should be close to 3 x cycles) ++* ++*/ ++static inline void delay(u32 cycles) ++{ ++ volatile int i; ++ ++ for (i = 0; i < cycles; i++); ++} ++ ++ ++/** Read PE id ++* ++* @return PE id (0 - 5 for CLASS-PE's, 6 - 9 for TMU-PE's, 10 for UTIL-PE) ++* ++*/ ++static inline u32 esi_get_mpid(void) ++{ ++ u32 mpid; ++ ++ asm ("rcsr %0, Configuration, MPID" : "=d" (mpid)); ++ ++ return mpid; ++} ++ ++ ++#define esi_get_csr(bank, csr) \ ++({ \ ++ u32 res; \ ++ asm ("rcsr %0, " #bank ", " #csr : "=d" (res)); \ ++ res; \ ++}) ++ ++#define esi_get_isa0() esi_get_csr(Configuration, ISA0) ++#define esi_get_isa1() esi_get_csr(Configuration, ISA1) ++#define esi_get_isa2() esi_get_csr(Configuration, ISA2) ++#define esi_get_isa3() esi_get_csr(Configuration, ISA3) ++#define esi_get_epc() esi_get_csr(Thread, EPC) ++#define esi_get_ecas() esi_get_csr(Thread, ECAS) ++#define esi_get_eid() esi_get_csr(Thread, EID) ++#define esi_get_ed() esi_get_csr(Thread, ED) ++ ++static inline void esi_pe_stop(U32 state) ++{ ++ PESTATUS_SETSTATE(state); ++ while (1) ++ { ++ asm("stop"); ++ } ++} ++ ++ ++/** Same 64bit alignment memory copy using efet. ++* Either the source or destination address must be in DMEM, the other address can be in LMEM or DDR. ++* Both the source and destination must have the same 64bit alignment, length should be more than four bytes ++* or dst/src must be 32bit aligned. Otherwise use efet_memcpy_any() ++* Uses efet synchronous interface to copy the data. ++* ++* @param dst Destination address to write to (must have the same 64bit alignment as src) ++* @param src Source address to read from (must have the same 64bit alignment as dst) ++* @param len Number of bytes to copy ++* ++*/ ++void efet_memcpy(void *dst, void *src, unsigned int len); ++ ++/** Same 64bit alignment memory copy using efet. ++* Either the source or destination address must be in DMEM, the other address can be in LMEM or DDR. ++* Both the source and destination must have the same 64bit alignment, there is no restriction on length. ++* For UTIL-PE revA0, this function will still fail to handle small/unaligned writes. ++* Uses efet synchronous interface to copy the data. ++* ++* @param dst Destination address to write to (must have the same 64bit alignment as src) ++* @param src Source address to read from (must have the same 64bit alignment as dst) ++* @param len Number of bytes to copy ++* ++*/ ++void efet_memcpy_any(void *dst, void *src, unsigned int len); ++ ++/** Same 64bit alignment memory copy using efet. ++* Either the source or destination address must be in DMEM, the other address can be in LMEM or DDR. ++* Both the source and destination must have the same 64bit alignment, length should be more than four bytes ++* or dst/src must be 32bit aligned. ++* Uses efet asynchronous interface to copy the data. ++* ++* @param dst Destination address to write to (must have the same 64bit alignment as src) ++* @param src Source address to read from (must have the same 64bit alignment as dst) ++* @param len Number of bytes to copy ++* ++*/ ++void efet_memcpy_nowait(void *dst, void *src, unsigned int len); ++ ++/** Unaligned memory copy using efet. ++* Either the source or destination address must be in DMEM, the other address can be in LMEM or DDR. ++* There is not restriction on source and destination, nor on length. ++* ++* @param dst Destination address to write to ++* @param src Source address to read from ++* @param len Number of bytes to copy ++* @param dmem_buf temp dmem buffer to use, must be 64bit aligned ++* @param dmem_len length of dmem buffer, must be 64bit aligned and at least 16 bytes ++* ++*/ ++void efet_memcpy_unaligned(void *dst, void *src, unsigned int len, void *dmem_buf, unsigned int dmem_len); ++ ++/** Aligned memory copy of 4 bytes to register address. ++* Register address must be 32 bit aligned. ++* ++* @param val value to be copied. ++* @param reg_addr Register address (must be 16bit aligned) ++* ++*/ ++void __efet_writel(u32 val, void *addr); ++ ++#ifdef REVA_WA ++#define efet_writel(val, addr) __efet_writel((u32)(val), (void *) (addr)) ++#else ++#define efet_writel(val, addr) writel((u32)(val), (void *) (addr)) ++#endif ++ ++ ++/** 32bit aligned memory copy. ++* Source and destination addresses must be 32bit aligned, there is no restriction on the length. ++* ++* @param dst Destination address (must be 32bit aligned) ++* @param src Source address (must be 32bit aligned) ++* @param len Number of bytes to copy ++* ++*/ ++void memcpy_aligned32(void *dst, void *src, unsigned int len); ++ ++/** Aligned memory copy. ++* Source and destination addresses must have the same alignment ++* relative to 32bit boundaries (but otherwsie may have any alignment), ++* there is no restriction on the length. ++* ++* @param dst Destination address ++* @param src Source address (must have same 32bit alignment as dst) ++* @param len Number of bytes to copy ++* ++*/ ++void memcpy_aligned(void *dst, void *src, unsigned int len); ++ ++/** Unaligned memory copy. ++* Implements unaligned memory copy. We first align the destination ++* to a 32bit boundary (using byte copies) then the src, and finally use a loop ++* of read, shift, write ++* ++* @param dst Destination address ++* @param src Source address (must have same 32bit alignment as dst) ++* @param len Number of bytes to copy ++* ++*/ ++void memcpy_unaligned(void *dst, void *src, unsigned int len); ++ ++/** Generic memory set. ++* Implements a generic memory set. Not very optimal (uses byte writes for the entire range) ++* ++* ++* @param dst Destination address ++* @param val Value to set memory to ++* @param len Number of bytes to set ++* ++*/ ++void memset(void *dst, u8 val, unsigned int len); ++ ++/** Generic memory copy. ++* Implements generic memory copy. If source and destination have the same ++* alignment memcpy_aligned() is used, otherwise memcpy_unaligned() ++* ++* @param dst Destination address ++* @param src Source address ++* @param len Number of bytes to copy ++* ++*/ ++void memcpy(void *dst, void *src, unsigned int len); ++ ++/** Generic memorymove. ++* Implements generic memorymove, where copies across overlapping ++* memory regions is supported. ++* Uses the dmem_buf passed as a parameter as a temporary buffer. ++* Includes two copies, forces one of the copies to be definitely aligned. ++* The "dmem_len" being passed should be atleast 3 bytes greater than "len" ++* The 3 bytes here are shift bytes used to ensure one aligned copy. ++* ++* @param dst Destination address ++* @param src Source address ++* @param len Number of bytes to copy ++* @param dmem_buf temp dmem buffer to use, must be 32bit aligned ++* @param dmem_len length of dmem buffer, must be 32bit aligned and at least 3 bytes greater ++* than @param len ++* ++*/ ++ ++void *memorymove(void * dst, void * src, unsigned int len, void *dmem_buf, unsigned int dmem_len); ++ ++/** Aligned memory copy in DDR memory. ++ * Implements aligned memory copy between two DDR buffers using efet_memcpy64 and DMEM ++ * Both the source and destination must have the same 64bit alignment, there is no restriction on length. ++ * If start or end are not 64bit aligned, data in destination buffer before start/after end will be corrupted. ++ * ++ * @param dst DDR Destination address ++ * @param src DDR Source address ++ * @param len Number of bytes to copy ++ * @param dmem_buf temp dmem buffer to use, must be 64bit aligned ++ * @param dmem_len length of dmem buffer, must be 64bit aligned and at least 16 bytes ++ */ ++void memcpy_ddr_to_ddr(void *dst, void *src, unsigned int len, void *dmem_buf, unsigned int dmem_len); ++ ++/** Unaligned memory copy in DDR memory. ++ * Implements generic memory copy between two DDR buffers using efet_memcpy and DMEM ++ * There is no restriction on the source, destination and length alignments. ++ * ++ * @param dst DDR Destination address ++ * @param src DDR Source address ++ * @param len Number of bytes to copy ++ * @param dmem_buf temp dmem buffer to use, must be 64bit aligned ++ * @param dmem_len length of dmem buffer, must be 64bit aligned and at least 16 bytes ++ */ ++void memcpy_ddr_to_ddr_unaligned(void *dst, void *src, unsigned int len, void *dmem_buf, unsigned int dmem_len); ++ ++#endif /* _PE_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h +@@ -0,0 +1,444 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _PFE_H_ ++#define _PFE_H_ ++ ++#define CLASS_DMEM_BASE_ADDR(i) (0x00000000 | ((i) << 20)) ++#define CLASS_IMEM_BASE_ADDR(i) (0x00000000 | ((i) << 20)) /* Only valid for mem access register interface */ ++#define CLASS_DMEM_SIZE 0x00002000 ++#define CLASS_IMEM_SIZE 0x00008000 ++ ++#define TMU_DMEM_BASE_ADDR(i) (0x00000000 + ((i) << 20)) ++#define TMU_IMEM_BASE_ADDR(i) (0x00000000 + ((i) << 20)) /* Only valid for mem access register interface */ ++#define TMU_DMEM_SIZE 0x00000800 ++#define TMU_IMEM_SIZE 0x00002000 ++ ++#define UTIL_DMEM_BASE_ADDR 0x00000000 ++#define UTIL_DMEM_SIZE 0x00002000 ++ ++#define PE_LMEM_BASE_ADDR 0xc3010000 ++#define PE_LMEM_SIZE 0x8000 ++#define PE_LMEM_END (PE_LMEM_BASE_ADDR + PE_LMEM_SIZE) ++ ++#define DMEM_BASE_ADDR 0x00000000 ++#define DMEM_SIZE 0x2000 /**< TMU has less... */ ++#define DMEM_END (DMEM_BASE_ADDR + DMEM_SIZE) ++ ++#define PMEM_BASE_ADDR 0x00010000 ++#define PMEM_SIZE 0x8000 /**< TMU has less... */ ++#define PMEM_END (PMEM_BASE_ADDR + PMEM_SIZE) ++ ++ ++/* These check memory ranges from PE point of view/memory map */ ++#define IS_DMEM(addr, len) (((unsigned long)(addr) >= DMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= DMEM_END)) ++#define IS_PMEM(addr, len) (((unsigned long)(addr) >= PMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= PMEM_END)) ++#define IS_PE_LMEM(addr, len) (((unsigned long)(addr) >= PE_LMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= PE_LMEM_END)) ++ ++#define IS_PFE_LMEM(addr, len) (((unsigned long)(addr) >= CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR)) && (((unsigned long)(addr) + (len)) <= CBUS_VIRT_TO_PFE(LMEM_END))) ++#define __IS_PHYS_DDR(addr, len) (((unsigned long)(addr) >= DDR_PHYS_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= DDR_PHYS_END)) ++#define IS_PHYS_DDR(addr, len) __IS_PHYS_DDR(DDR_PFE_TO_PHYS(addr), len) ++ ++/* If using a run-time virtual address for the cbus base address use this code */ ++extern void *cbus_base_addr; ++extern void *ddr_base_addr; ++extern unsigned long ddr_phys_base_addr; ++extern unsigned int ddr_size; ++ ++#if defined(COMCERTO_2000_CONTROL) ++#include ++#if defined (CONFIG_PLATFORM_C2000) ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0) ++/*This is copied from arch/arm/include/asm/system_info.h */ ++extern unsigned int system_rev; ++#endif ++#endif ++#endif ++ ++#define CBUS_BASE_ADDR cbus_base_addr ++#define DDR_PHYS_BASE_ADDR ddr_phys_base_addr ++#define DDR_BASE_ADDR ddr_base_addr ++#define DDR_SIZE ddr_size ++ ++#define DDR_PHYS_END (DDR_PHYS_BASE_ADDR + DDR_SIZE) ++ ++#if defined(CONFIG_PLATFORM_C2000) ++#define PFE_CBUS_PHYS_BASE_ADDR 0xc0000000 /**< CBUS physical base address as seen by PE's. */ ++#define DDR_PHYS_TO_PFE(p) (p) ++#define DDR_PFE_TO_PHYS(p) (p) ++#define CBUS_PHYS_TO_PFE(p) (p) ++#else ++#define LS1012A_PFE_RESET_WA /*PFE doesn't have global reset and re-init should takecare few things to make PFE functional after reset */ ++#define PFE_CBUS_PHYS_BASE_ADDR 0xc0000000 /**< CBUS physical base address as seen by PE's. */ ++#define PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE 0xc0000000 /**< CBUS physical base address as seen by PE's. */ ++#define DDR_PHYS_TO_PFE(p) (((unsigned long int) (p)) & 0x7FFFFFFF) ++#define DDR_PFE_TO_PHYS(p) (((unsigned long int) (p)) | 0x80000000) ++#define CBUS_PHYS_TO_PFE(p) (((p) - PFE_CBUS_PHYS_BASE_ADDR) + PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE) /*Translates to PFE address map */ ++#endif ++ ++#define DDR_PHYS_TO_VIRT(p) (((p) - DDR_PHYS_BASE_ADDR) + DDR_BASE_ADDR) ++#define DDR_VIRT_TO_PHYS(v) (((v) - DDR_BASE_ADDR) + DDR_PHYS_BASE_ADDR) ++#define DDR_VIRT_TO_PFE(p) (DDR_PHYS_TO_PFE(DDR_VIRT_TO_PHYS(p))) ++ ++#define CBUS_VIRT_TO_PFE(v) (((v) - CBUS_BASE_ADDR) + PFE_CBUS_PHYS_BASE_ADDR) ++#define CBUS_PFE_TO_VIRT(p) (((p) - PFE_CBUS_PHYS_BASE_ADDR) + CBUS_BASE_ADDR) ++ ++/* The below part of the code is used in QOS control driver from host */ ++#define TMU_APB_BASE_ADDR 0xc1000000 /** TMU base address seen by pe's */ ++ ++#define SHAPER0_BASE_ADDR (TMU_APB_BASE_ADDR + 0x020000) ++#define SHAPER1_BASE_ADDR (TMU_APB_BASE_ADDR + 0x030000) ++#define SHAPER2_BASE_ADDR (TMU_APB_BASE_ADDR + 0x040000) ++#define SHAPER3_BASE_ADDR (TMU_APB_BASE_ADDR + 0x050000) ++#define SHAPER4_BASE_ADDR (TMU_APB_BASE_ADDR + 0x060000) ++#define SHAPER5_BASE_ADDR (TMU_APB_BASE_ADDR + 0x070000) ++#define SHAPER6_BASE_ADDR (TMU_APB_BASE_ADDR + 0x080000) ++#define SHAPER7_BASE_ADDR (TMU_APB_BASE_ADDR + 0x090000) ++#define SHAPER8_BASE_ADDR (TMU_APB_BASE_ADDR + 0x0a0000) ++#define SHAPER9_BASE_ADDR (TMU_APB_BASE_ADDR + 0x0b0000) ++ ++#define SCHED0_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1c0000) ++#define SCHED1_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1d0000) ++#define SCHED2_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1e0000) ++#define SCHED3_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1f0000) ++#define SCHED4_BASE_ADDR (TMU_APB_BASE_ADDR + 0x200000) ++#define SCHED5_BASE_ADDR (TMU_APB_BASE_ADDR + 0x210000) ++#define SCHED6_BASE_ADDR (TMU_APB_BASE_ADDR + 0x220000) ++#define SCHED7_BASE_ADDR (TMU_APB_BASE_ADDR + 0x230000) ++ ++#define PHY_QUEUE_BASE_ADDR (TMU_APB_BASE_ADDR + 0x260000) ++#define QUEUE_RESULT0 (PHY_QUEUE_BASE_ADDR + 0x48) /**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY3), [6:0] winner input queue number */ ++#define QUEUE_RESULT1 (PHY_QUEUE_BASE_ADDR + 0x4c) /**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY4), [6:0] winner input queue number */ ++#define QUEUE_RESULT2 (PHY_QUEUE_BASE_ADDR + 0x50) /**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY5), [6:0] winner input queue number */ ++ ++#define QUEUE_RESULT0_REGOFFSET (QUEUE_RESULT0 - QUEUE_RESULT0) ++#define QUEUE_RESULT1_REGOFFSET (QUEUE_RESULT1 - QUEUE_RESULT0) ++#define QUEUE_RESULT2_REGOFFSET (QUEUE_RESULT2 - QUEUE_RESULT0) ++ ++ ++#include "cbus.h" ++ ++enum { ++ CLASS0_ID = 0, ++ CLASS1_ID, ++ CLASS2_ID, ++ CLASS3_ID, ++#if !defined(CONFIG_PLATFORM_PCI) ++ CLASS4_ID, ++ CLASS5_ID, ++#endif ++#if !defined(CONFIG_TMU_DUMMY) ++ TMU0_ID, ++ TMU1_ID, ++ TMU2_ID, ++ TMU3_ID, ++#else ++ TMU0_ID, ++#endif ++#if !defined(CONFIG_UTIL_DISABLED) ++ UTIL_ID, ++#endif ++ MAX_PE ++}; ++ ++enum { ++ CLASS_TYPE = 0, ++ TMU_TYPE, ++ UTIL_TYPE ++}; ++ ++#if !defined(CONFIG_PLATFORM_PCI) ++#define CLASS_MASK ((1 << CLASS0_ID) | (1 << CLASS1_ID) | (1 << CLASS2_ID) | (1 << CLASS3_ID) | (1 << CLASS4_ID) | (1 << CLASS5_ID)) ++#define CLASS_MAX_ID CLASS5_ID ++#else ++#define CLASS_MASK ((1 << CLASS0_ID) | (1 << CLASS1_ID) | (1 << CLASS2_ID) | (1 << CLASS3_ID)) ++#define CLASS_MAX_ID CLASS3_ID ++#endif ++ ++#if !defined(CONFIG_TMU_DUMMY) ++#if defined(CONFIG_PLATFORM_LS1012A) ++#define TMU_MASK ((1 << TMU0_ID) | (1 << TMU1_ID) | (1 << TMU3_ID)) ++#else ++#define TMU_MASK ((1 << TMU0_ID) | (1 << TMU1_ID) | (1 << TMU2_ID) | (1 << TMU3_ID)) ++#endif ++#define TMU_MAX_ID TMU3_ID ++#else ++#define TMU_MASK (1 << TMU0_ID) ++#define TMU_MAX_ID TMU0_ID ++#endif ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++#define UTIL_MASK (1 << UTIL_ID) ++#endif ++ ++typedef struct tPE_STATUS ++{ ++ u32 cpu_state; ++ u32 activity_counter; ++ u32 rx; ++ union { ++ u32 tx; ++ u32 tmu_qstatus; ++ }; ++ u32 drop; ++#if defined(CFG_PE_DEBUG) ++ u32 debug_indicator; ++ u32 debug[16]; ++#endif ++} __attribute__((aligned(16))) PE_STATUS; ++ ++ ++struct pe_sync_mailbox ++{ ++ u32 stop; ++ u32 stopped; ++}; ++ ++struct pe_msg_mailbox ++{ ++ u32 dst; ++ u32 src; ++ u32 len; ++ u32 request; ++}; ++ ++// Drop counter definitions ++ ++#define CLASS_NUM_DROP_COUNTERS 13 ++#define UTIL_NUM_DROP_COUNTERS 8 ++ ++ ++/** PE information. ++ * Structure containing PE's specific information. It is used to create ++ * generic C functions common to all PE's. ++ * Before using the library functions this structure needs to be initialized with the different registers virtual addresses ++ * (according to the ARM MMU mmaping). The default initialization supports a virtual == physical mapping. ++ * ++ */ ++struct pe_info ++{ ++ u32 dmem_base_addr; /**< PE's dmem base address */ ++ u32 pmem_base_addr; /**< PE's pmem base address */ ++ u32 pmem_size; /**< PE's pmem size */ ++ ++ void *mem_access_wdata; /**< PE's _MEM_ACCESS_WDATA register address */ ++ void *mem_access_addr; /**< PE's _MEM_ACCESS_ADDR register address */ ++ void *mem_access_rdata; /**< PE's _MEM_ACCESS_RDATA register address */ ++}; ++ ++ ++void pe_lmem_read(u32 *dst, u32 len, u32 offset); ++void pe_lmem_write(u32 *src, u32 len, u32 offset); ++ ++void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len); ++void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len); ++ ++u32 pe_pmem_read(int id, u32 addr, u8 size); ++ ++void pe_dmem_write(int id, u32 val, u32 addr, u8 size); ++u32 pe_dmem_read(int id, u32 addr, u8 size); ++void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len); ++void class_pe_lmem_memset(u32 dst, int val, unsigned int len); ++void class_bus_write(u32 val, u32 addr, u8 size); ++u32 class_bus_read(u32 addr, u8 size); ++ ++ ++#define class_bus_readl(addr) class_bus_read(addr, 4) ++#define class_bus_readw(addr) class_bus_read(addr, 2) ++#define class_bus_readb(addr) class_bus_read(addr, 1) ++ ++#define class_bus_writel(val, addr) class_bus_write(val, addr, 4) ++#define class_bus_writew(val, addr) class_bus_write(val, addr, 2) ++#define class_bus_writeb(val, addr) class_bus_write(val, addr, 1) ++ ++#define pe_dmem_readl(id, addr) pe_dmem_read(id, addr, 4) ++#define pe_dmem_readw(id, addr) pe_dmem_read(id, addr, 2) ++#define pe_dmem_readb(id, addr) pe_dmem_read(id, addr, 1) ++ ++#define pe_dmem_writel(id, val, addr) pe_dmem_write(id, val, addr, 4) ++#define pe_dmem_writew(id, val, addr) pe_dmem_write(id, val, addr, 2) ++#define pe_dmem_writeb(id, val, addr) pe_dmem_write(id, val, addr, 1) ++ ++//int pe_load_elf_section(int id, const void *data, Elf32_Shdr *shdr); ++int pe_load_elf_section(int id, const void *data, Elf32_Shdr *shdr, struct device *dev); ++ ++void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base, unsigned int ddr_size); ++void bmu_init(void *base, BMU_CFG *cfg); ++void bmu_reset(void *base); ++void bmu_enable(void *base); ++void bmu_disable(void *base); ++void bmu_set_config(void *base, BMU_CFG *cfg); ++ ++/* An enumerated type for loopback values. This can be one of three values, no ++ * loopback -normal operation, local loopback with internal loopback module of ++ * MAC or PHY loopback which is through the external PHY. ++ */ ++#ifndef __MAC_LOOP_ENUM__ ++#define __MAC_LOOP_ENUM__ ++typedef enum {LB_NONE, LB_EXT, LB_LOCAL} MAC_LOOP; ++#endif ++ ++ ++void gemac_init(void *base, void *config); ++void gemac_disable_rx_checksum_offload(void *base); ++void gemac_enable_rx_checksum_offload(void *base); ++void gemac_set_mdc_div(void *base, int mdc_div); ++void gemac_set_speed(void *base, MAC_SPEED gem_speed); ++void gemac_set_duplex(void *base, int duplex); ++void gemac_set_mode(void *base, int mode); ++void gemac_enable(void *base); ++void gemac_tx_disable(void *base); ++void gemac_disable(void *base); ++void gemac_reset(void *base); ++void gemac_set_address(void *base, SPEC_ADDR *addr); ++SPEC_ADDR gemac_get_address(void *base); ++void gemac_set_loop( void *base, MAC_LOOP gem_loop ); ++void gemac_set_laddr1(void *base, MAC_ADDR *address); ++void gemac_set_laddr2(void *base, MAC_ADDR *address); ++void gemac_set_laddr3(void *base, MAC_ADDR *address); ++void gemac_set_laddr4(void *base, MAC_ADDR *address); ++void gemac_set_laddrN(void *base, MAC_ADDR *address, unsigned int entry_index); ++void gemac_clear_laddr1(void *base); ++void gemac_clear_laddr2(void *base); ++void gemac_clear_laddr3(void *base); ++void gemac_clear_laddr4(void *base); ++void gemac_clear_laddrN(void *base, unsigned int entry_index); ++MAC_ADDR gemac_get_hash( void *base ); ++void gemac_set_hash( void *base, MAC_ADDR *hash ); ++MAC_ADDR gem_get_laddr1(void *base); ++MAC_ADDR gem_get_laddr2(void *base); ++MAC_ADDR gem_get_laddr3(void *base); ++MAC_ADDR gem_get_laddr4(void *base); ++MAC_ADDR gem_get_laddrN(void *base, unsigned int entry_index); ++void gemac_set_config(void *base, GEMAC_CFG *cfg); ++void gemac_allow_broadcast(void *base); ++void gemac_no_broadcast(void *base); ++void gemac_enable_unicast(void *base); ++void gemac_disable_unicast(void *base); ++void gemac_enable_multicast(void *base); ++void gemac_disable_multicast(void *base); ++void gemac_enable_fcs_rx(void *base); ++void gemac_disable_fcs_rx(void *base); ++void gemac_enable_1536_rx(void *base); ++void gemac_disable_1536_rx(void *base); ++void gemac_enable_rx_jmb(void *base); ++void gemac_disable_rx_jmb(void *base); ++void gemac_enable_stacked_vlan(void *base); ++void gemac_disable_stacked_vlan(void *base); ++void gemac_enable_pause_rx(void *base); ++void gemac_disable_pause_rx(void *base); ++void gemac_enable_copy_all(void *base); ++void gemac_disable_copy_all(void *base); ++void gemac_set_bus_width(void *base, int width); ++void gemac_set_wol(void *base, u32 wol_conf); ++ ++void gpi_init(void *base, GPI_CFG *cfg); ++void gpi_reset(void *base); ++void gpi_enable(void *base); ++void gpi_disable(void *base); ++void gpi_set_config(void *base, GPI_CFG *cfg); ++ ++void class_init(CLASS_CFG *cfg); ++void class_reset(void); ++void class_enable(void); ++void class_disable(void); ++void class_set_config(CLASS_CFG *cfg); ++ ++void tmu_reset(void); ++void tmu_init(TMU_CFG *cfg); ++void tmu_enable(u32 pe_mask); ++void tmu_disable(u32 pe_mask); ++u32 tmu_qstatus(u32 if_id); ++u32 tmu_pkts_processed(u32 if_id); ++ ++void util_init(UTIL_CFG *cfg); ++void util_reset(void); ++void util_enable(void); ++void util_disable(void); ++ ++void hif_nocpy_init(void); ++void hif_nocpy_tx_enable(void); ++void hif_nocpy_tx_disable(void); ++void hif_nocpy_rx_enable(void); ++void hif_nocpy_rx_disable(void); ++ ++void hif_init(void); ++void hif_tx_enable(void); ++void hif_tx_disable(void); ++void hif_rx_enable(void); ++void hif_rx_disable(void); ++ ++ ++/** Get Chip Revision level ++* ++*/ ++ ++static inline unsigned int CHIP_REVISION(void) ++{ ++#if defined (CONFIG_PLATFORM_C2000) ++#if 1 ++ return system_rev; ++ //return 0; ++#else ++ return (readl(COMCERTO_GPIO_DEVICE_ID_REG) >> 24) & 0xf; ++#endif ++ ++#else ++ /*For LS1012A return always 1 */ ++ return 1; ++#endif ++} ++ ++/** Start HIF rx DMA ++* ++*/ ++static inline void hif_rx_dma_start(void) ++{ ++ /*TODO not sure poll_cntrl_en is required or not */ ++ writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_RX_CTRL); ++} ++ ++/** Start HIF tx DMA ++* ++*/ ++static inline void hif_tx_dma_start(void) ++{ ++ /*TODO not sure poll_cntrl_en is required or not */ ++ writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_TX_CTRL); ++} ++ ++/** Start HIF_NOCPY rx DMA ++* ++*/ ++static inline void hif_nocpy_rx_dma_start(void) ++{ ++ /*TODO not sure poll_cntrl_en is required or not */ ++ writel((HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB), HIF_NOCPY_RX_CTRL); ++} ++ ++/** Start HIF_NOCPY tx DMA ++* ++*/ ++static inline void hif_nocpy_tx_dma_start(void) ++{ ++ /*TODO not sure poll_cntrl_en is required or not */ ++ writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_NOCPY_TX_CTRL); ++} ++ ++#endif /* _PFE_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/tmu.h +@@ -0,0 +1,68 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _TMU_H_ ++#define _TMU_H_ ++ ++#define TMU_DMEM_BASE_ADDR 0x00000000 ++#define TMU_PMEM_BASE_ADDR 0x00010000 ++ ++#define CBUS_BASE_ADDR 0xc0000000 ++#define TMU_APB_BASE_ADDR 0xc1000000 ++ ++#if defined (COMCERTO_2000_TMU) || defined (COMCERTO_2000_CONTROL) ++ ++#include "cbus.h" ++ ++#define GPT_BASE_ADDR (TMU_APB_BASE_ADDR + 0x00000) ++#define UART_BASE_ADDR (TMU_APB_BASE_ADDR + 0x10000) ++ ++#define SHAPER0_BASE_ADDR (TMU_APB_BASE_ADDR + 0x020000) ++#define SHAPER1_BASE_ADDR (TMU_APB_BASE_ADDR + 0x030000) ++#define SHAPER2_BASE_ADDR (TMU_APB_BASE_ADDR + 0x040000) ++#define SHAPER3_BASE_ADDR (TMU_APB_BASE_ADDR + 0x050000) ++#define SHAPER4_BASE_ADDR (TMU_APB_BASE_ADDR + 0x060000) ++#define SHAPER5_BASE_ADDR (TMU_APB_BASE_ADDR + 0x070000) ++#define SHAPER6_BASE_ADDR (TMU_APB_BASE_ADDR + 0x080000) ++#define SHAPER7_BASE_ADDR (TMU_APB_BASE_ADDR + 0x090000) ++#define SHAPER8_BASE_ADDR (TMU_APB_BASE_ADDR + 0x0a0000) ++#define SHAPER9_BASE_ADDR (TMU_APB_BASE_ADDR + 0x0b0000) ++ ++#define SCHED0_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1c0000) ++#define SCHED1_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1d0000) ++#define SCHED2_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1e0000) ++#define SCHED3_BASE_ADDR (TMU_APB_BASE_ADDR + 0x1f0000) ++#define SCHED4_BASE_ADDR (TMU_APB_BASE_ADDR + 0x200000) ++#define SCHED5_BASE_ADDR (TMU_APB_BASE_ADDR + 0x210000) ++#define SCHED6_BASE_ADDR (TMU_APB_BASE_ADDR + 0x220000) ++#define SCHED7_BASE_ADDR (TMU_APB_BASE_ADDR + 0x230000) ++ ++#define SHAPER_STATUS (TMU_APB_BASE_ADDR + 0x270000) /**< [9:0] bitmask of shapers that have positive credit */ ++ ++#include "gpt.h" ++#include "uart.h" ++#include "tmu/shaper.h" ++#include "tmu/sched.h" ++ ++#endif ++ ++#define PHY_QUEUE_BASE_ADDR (TMU_APB_BASE_ADDR + 0x260000) ++ ++#include "tmu/phy_queue.h" ++ ++#endif /* _TMU_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/tmu/phy_queue.h +@@ -0,0 +1,56 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _PHY_QUEUE_H_ ++#define _PHY_QUEUE_H_ ++ ++#define PHY_QUEUE_SHAPER_STATUS (PHY_QUEUE_BASE_ADDR + 0x00) /**< [28:19] same as SHAPER_STATUS, [18:3] same as QUEUE_STATUS, [2:0] must be zero before a new packet may be dequeued */ ++#define QUEUE_STATUS (PHY_QUEUE_BASE_ADDR + 0x04) /**< [15:0] bit mask of input queues with pending packets */ ++ ++#define QUEUE0_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x08) ++#define QUEUE1_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x0c) ++#define QUEUE2_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x10) ++#define QUEUE3_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x14) ++#define QUEUE4_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x18) ++#define QUEUE5_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x1c) ++#define QUEUE6_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x20) ++#define QUEUE7_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x24) ++#define QUEUE8_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x28) ++#define QUEUE9_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x2c) ++#define QUEUE10_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x30) ++#define QUEUE11_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x34) ++#define QUEUE12_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x38) ++#define QUEUE13_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x3c) ++#define QUEUE14_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x40) ++#define QUEUE15_PKT_LEN (PHY_QUEUE_BASE_ADDR + 0x44) ++#define QUEUE_RESULT0 (PHY_QUEUE_BASE_ADDR + 0x48) /**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY3), [6:0] winner input queue number */ ++#define QUEUE_RESULT1 (PHY_QUEUE_BASE_ADDR + 0x4c) /**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY4), [6:0] winner input queue number */ ++#define QUEUE_RESULT2 (PHY_QUEUE_BASE_ADDR + 0x50) /**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY5), [6:0] winner input queue number */ ++#define TMU_PE_GP_REG (PHY_QUEUE_BASE_ADDR + 0x54) ++#define QUEUE_GBL_PKTLEN (PHY_QUEUE_BASE_ADDR + 0x5c) ++#define QUEUE_GBL_PKTLEN_MASK (PHY_QUEUE_BASE_ADDR + 0x60) ++ ++#define QUEUE_RESULT0_REGOFFSET (QUEUE_RESULT0 - QUEUE_RESULT0) ++#define QUEUE_RESULT1_REGOFFSET (QUEUE_RESULT1 - QUEUE_RESULT0) ++#define QUEUE_RESULT2_REGOFFSET (QUEUE_RESULT2 - QUEUE_RESULT0) ++ ++#define TEQ_HTD (1 << 22) ++#define TEQ_HWRED (1 << 21) ++ ++ ++#endif /* _PHY_QUEUE_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/tmu/sched.h +@@ -0,0 +1,72 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _SCHED_H_ ++#define _SCHED_H_ ++ ++/* Offsets from SCHEDx_BASE_ADDR */ ++#define SCHED_CTRL 0x00 ++#define SCHED_SLOT_TIME 0x04 ++#define SCHED_RES 0x08 ++#define SCHED_QUEUE_ALLOC0 0x0c ++#define SCHED_QUEUE_ALLOC1 0x10 ++#define SCHED_BW 0x14 ++#define SCHED_GUR_DEF_CTR 0x18 ++#define SCHED_AVL_CTR 0x1c ++#define SCHED_QU0_WGHT 0x20 ++#define SCHED_QU1_WGHT 0x24 ++#define SCHED_QU2_WGHT 0x28 ++#define SCHED_QU3_WGHT 0x2c ++#define SCHED_QU4_WGHT 0x30 ++#define SCHED_QU5_WGHT 0x34 ++#define SCHED_QU6_WGHT 0x38 ++#define SCHED_QU7_WGHT 0x3c ++#define SCHED_QUE0_DEFICIT_CNT 0x40 ++#define SCHED_QUE1_DEFICIT_CNT 0x44 ++#define SCHED_QUE2_DEFICIT_CNT 0x48 ++#define SCHED_QUE3_DEFICIT_CNT 0x4c ++#define SCHED_QUE4_DEFICIT_CNT 0x50 ++#define SCHED_QUE5_DEFICIT_CNT 0x54 ++#define SCHED_QUE6_DEFICIT_CNT 0x58 ++#define SCHED_QUE7_DEFICIT_CNT 0x5c ++#define SCHED_PKT_LEN 0x60 ++ ++#define SCHED_CTRL_ALGOTYPE(x) (((x) & 0xf) << 0) ++#define SCHED_CTRL_CALQUOTA(x) (((x) & 0x1) << 4) ++#define SCHED_CTRL_ACTIVE_Q(x) (((x) & 0xff) << 8) ++#define SCHED_CTRL_SHARE_BW(x) (((x) & 0xff) << 16) ++#define SCHED_CTRL_BARROW_BW(x) (((x) & 0xff) << 24) ++ ++#define SCHED_QUEUE_ALLOC(x, b) (((x) & 0x1f) << (b)) ++ ++#define SCHED_QUEUE_ALLOC0_QUEUEA(x) (((x) & 0x1f) << 0) ++#define SCHED_QUEUE_ALLOC0_QUEUEB(x) (((x) & 0x1f) << 8) ++#define SCHED_QUEUE_ALLOC0_QUEUEC(x) (((x) & 0x1f) << 16) ++#define SCHED_QUEUE_ALLOC0_QUEUED(x) (((x) & 0x1f) << 24) ++ ++#define SCHED_QUEUE_ALLOC0_RES0(x) (((x) & 0x7) << 5) ++#define SCHED_QUEUE_ALLOC0_RES1(x) (((x) & 0x7) << 13) ++#define SCHED_QUEUE_ALLOC0_RES2(x) (((x) & 0x7) << 21) ++#define SCHED_QUEUE_ALLOC0_RES3(x) (((x) & 0x7) << 29) ++ ++#define SCHED_QUEUE_ALLOC1_QUEUEA(x) (((x) & 0x1f) << 0) ++#define SCHED_QUEUE_ALLOC1_QUEUEB(x) (((x) & 0x1f) << 8) ++#define SCHED_QUEUE_ALLOC1_QUEUEC(x) (((x) & 0x1f) << 16) ++#define SCHED_QUEUE_ALLOC1_QUEUED(x) (((x) & 0x1f) << 24) ++ ++#endif /* _SCHED_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/tmu/shaper.h +@@ -0,0 +1,37 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _SHAPER_H_ ++#define _SHAPER_H_ ++ ++/* Offsets from SHAPPERx_BASE_ADDR */ ++#define SHAPER_CTRL 0x00 ++#define SHAPER_WEIGHT 0x04 ++#define SHAPER_PKT_LEN 0x08 ++ ++#define SHAPER_CTRL_ENABLE(x) (((x) & 0x1) << 0) ++#define SHAPER_CTRL_QNO(x) (((x) & 0x3f) << 1) ++#define SHAPER_CTRL_CLKDIV(x) (((x) & 0xffff) << 16) ++ ++#define SHAPER_WEIGHT_FRACWT(x) (((x) & 0xff) << 0) ++#define SHAPER_WEIGHT_INTWT(x) (((x) & 0x3) << 8) ++#define SHAPER_WEIGHT_MAXCREDIT(x) (((x) & 0x3fffff) << 10) ++ ++#define PORT_SHAPER_MASK (1 << 0) ++ ++#endif /* _SHAPER_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/uart.h +@@ -0,0 +1,31 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _UART_H_ ++#define _UART_H_ ++ ++#define UART_THR (UART_BASE_ADDR + 0x00) ++#define UART_IER (UART_BASE_ADDR + 0x04) ++#define UART_IIR (UART_BASE_ADDR + 0x08) ++#define UART_LCR (UART_BASE_ADDR + 0x0c) ++#define UART_MCR (UART_BASE_ADDR + 0x10) ++#define UART_LSR (UART_BASE_ADDR + 0x14) ++#define UART_MDR (UART_BASE_ADDR + 0x18) ++#define UART_SCRATCH (UART_BASE_ADDR + 0x1c) ++ ++#endif /* _UART_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/util.h +@@ -0,0 +1,49 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _UTIL_H_ ++#define _UTIL_H_ ++ ++#define UTIL_DMEM_BASE_ADDR 0x00000000 ++#define UTIL_DMEM_SIZE 0x00002000 ++#define UTIL_DMEM_END (UTIL_DMEM_BASE_ADDR + UTIL_DMEM_SIZE) ++ ++#define IS_DMEM(addr, len) (((unsigned long)(addr) >= UTIL_DMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= UTIL_DMEM_END)) ++ ++#define CBUS_BASE_ADDR 0xc0000000 ++#define UTIL_APB_BASE_ADDR 0xc1000000 ++ ++#include "cbus.h" ++ ++#define GPT_BASE_ADDR (UTIL_APB_BASE_ADDR + 0x00000) ++#define UART_BASE_ADDR (UTIL_APB_BASE_ADDR + 0x10000) ++#define EAPE_BASE_ADDR (UTIL_APB_BASE_ADDR + 0x20000) ++#define INQ_BASE_ADDR (UTIL_APB_BASE_ADDR + 0x30000) ++#define EFET1_BASE_ADDR (UTIL_APB_BASE_ADDR + 0x40000) ++#define EFET2_BASE_ADDR (UTIL_APB_BASE_ADDR + 0x50000) ++#define EFET3_BASE_ADDR (UTIL_APB_BASE_ADDR + 0x60000) ++ ++ ++#include "gpt.h" ++#include "uart.h" ++#include "util/eape.h" ++#include "util/inq.h" ++#include "util/efet.h" ++ ++ ++#endif /* _UTIL_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/util/eape.h +@@ -0,0 +1,57 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _EAPE_H_ ++#define _EAPE_H_ ++ ++#define EAPE_STATUS (EAPE_BASE_ADDR + 0x0) ++#define EAPE_INT_ENABLE (EAPE_BASE_ADDR + 0x4) ++#define EAPE_INT_SRC (EAPE_BASE_ADDR + 0x8) ++#define EAPE_HOST_INT_ENABLE (EAPE_BASE_ADDR + 0xc) ++ ++/** The following bits represents to enable interrupts from host and to host ++* from / to utilpe */ ++ ++#define IRQ_EN_EFET_TO_UTIL 0x1 ++#define IRQ_EN_QB_TO_UTIL 0x2 ++#define IRQ_EN_INQ_TO_UTIL 0x4 ++#define IRQ_EN_EAPE_TO_UTIL 0x8 ++#define IRQ_EN_GPT_TMR_TO_UTIL 0x10 ++#define IRQ_EN_UART_TO_UTIL 0x20 ++#define IRQ_EN_SYSLP_TO_UTIL 0x40 ++#define IRQ_EN_UPEGP_TO_UTIL 0x80 ++ ++/** Out interrupts */ ++ ++#define IRQ_EN_EFET_OUT 0x100 ++#define IRQ_EN_QB_OUT 0x200 ++#define IRQ_EN_INQ_OUT 0x400 ++#define IRQ_EN_EAPE_OUT 0x800 ++#define IRQ_EN_GPT_TMR_OUT 0x1000 ++#define IRQ_EN_UART_OUT 0x2000 ++#define IRQ_EN_SYSLP_OUT 0x4000 ++#define IRQ_EN_UPEGP_OUT 0x8000 ++ ++/** The following bits are enabled in the status register ++ * which are mapped to IPSEC status register bits */ ++#define EAPE_IN_STAT_AVAIL 0x1 ++#define EAPE_OUT_STAT_AVAIL 0x2 ++#define EAPE_IN_CMD_AVAIL 0x4 ++#define EAPE_OUT_CMD_AVAIL 0x8 ++ ++#endif /* _EAPE_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/util/efet.h +@@ -0,0 +1,119 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _UTIL_EFET_H_ ++#define _UTIL_EFET_H_ ++ ++#define EFET_ENTRY_ADDR 0x00 ++#define EFET_ENTRY_SIZE 0x04 ++#define EFET_ENTRY_DMEM_ADDR 0x08 ++#define EFET_ENTRY_STATUS 0x0c ++#define EFET_ENTRY_ENDIAN 0x10 ++ ++#define CBUS2DMEM 0 ++#define DMEM2CBUS 1 ++ ++#define EFET2BUS_LE (1 << 0) ++ ++#define EFET1 0 ++#define EFET2 1 ++#define EFET3 2 ++#define MAX_UTIL_EFET_LEN 128 ++ ++extern const unsigned long util_efet_baseaddr[3]; ++extern u32 util_efet_status; ++ ++/* The barrier call is an empirical work-around for an unknown bug: for some unknown reason, it solves ++ * a UtilPE crash observed with LRO and packet steering. Other solutions also worked (e.g. barrier, ++ * nop calls in other positions). However, no common pattern could be extracted from those solutions ++ * to narrow down the source of the crash. ++ */ ++ ++#define __UTIL_EFET(i, cbus_addr, dmem_addr,len,dir) do { \ ++ __writel((len & 0x3FF) | (dir << 16), util_efet_baseaddr[i] + EFET_ENTRY_SIZE); \ ++ __writel(dmem_addr, util_efet_baseaddr[i] + EFET_ENTRY_DMEM_ADDR);\ ++ __writel(cbus_addr, util_efet_baseaddr[i] + EFET_ENTRY_ADDR);\ ++ nop();\ ++ }while(0) ++ ++#define UTIL_EFET(i, cbus_addr, dmem_addr,len,dir) do { \ ++ __UTIL_EFET(i, cbus_addr, dmem_addr, len, dir); \ ++ util_efet_status |= (1 << i); \ ++ } while(0) ++ ++ ++/** Waits for the util efet to finish a transaction, blocking the caller ++* (without updating the status). ++* Can be called at any time. ++* ++* @param i Efet index ++* ++* ++*/ ++static inline void __util_efet_wait(int i) ++{ ++ while (!(readl(util_efet_baseaddr[i] + EFET_ENTRY_STATUS) & 0x1)) ; ++} ++ ++/** Waits for the util efet to finish a transaction, blocking the caller. ++* Can be called at any time. ++* ++* @param i Efet index ++* ++*/ ++static inline void util_efet_wait(int i) ++{ ++ __util_efet_wait(i); ++ ++ util_efet_status &= ~(1 << i); ++} ++ ++/** Asynchronous interface to util efet read/write functions. ++* It will wait for the efet to finish previous transaction, but does not wait for the current transaction to finish. ++* ++* @param i Efet index ++* @param cbus_addr Cbus address (must be 64bits aligned) ++* @param dmem_addr DMEM address (must be 64bits aligned) ++* @param len Number of bytes to copy (must be 64bits aligned size) ++* @param dir Direction of the transaction (0 - cbus to dmem, 1 - dmem to cbus) ++* ++*/ ++static inline void util_efet_async(int i, u32 cbus_addr, u32 dmem_addr, u32 len, u8 dir) ++{ ++ if (util_efet_status & (1 << i)) ++ util_efet_wait(i); ++ ++ UTIL_EFET(i, cbus_addr, dmem_addr, len, dir); ++} ++ ++ ++static inline void util_efet_async0( u32 cbus_addr, u32 dmem_addr, u32 len, u8 dir) ++{ ++ util_efet_async(0, cbus_addr, dmem_addr, len,dir); ++} ++ ++/* EFET 2 is aways used for SYNC operations */ ++static inline void util_efet_sync2(u32 cbus_addr, u32 dmem_addr, u32 len, u8 dir) ++{ ++ __UTIL_EFET(2, cbus_addr, dmem_addr, len,dir); ++ __util_efet_wait(2); ++} ++ ++void util_efet_sync0(u32 cbus_addr, u32 dmem_addr, u32 len, u8 dir); ++#endif /* _UTIL_EFET_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/include/pfe/util/inq.h +@@ -0,0 +1,28 @@ ++/* ++ * Copyright (c) 2011, 2014 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++ * ++*/ ++#ifndef _INQ_H_ ++#define _INQ_H_ ++ ++#define INQ_HOST_GP (INQ_BASE_ADDR + 0x00) /* FIXME what are these for ? */ ++#define INQ_UPE_GP (INQ_BASE_ADDR + 0x04) /* FIXME what are these for ? */ ++ ++#define INQ_QB_PKTPTR (INQ_BASE_ADDR + 0x08) ++#define INQ_FIFO_CNT (INQ_BASE_ADDR + 0x0c) ++ ++#endif /* _INQ_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_ctrl.c +@@ -0,0 +1,363 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifdef __KERNEL__ ++#include ++#include ++#include ++#include ++#include ++#else ++#include "platform.h" ++#endif ++ ++#include "pfe_mod.h" ++#include "pfe_ctrl.h" ++ ++#include "pfe_ctrl_hal.h" ++ ++static struct pe_sync_mailbox CLASS_DMEM_SH2(sync_mailbox); ++static struct pe_sync_mailbox TMU_DMEM_SH2(sync_mailbox); ++ ++static struct pe_msg_mailbox CLASS_DMEM_SH2(msg_mailbox); ++static struct pe_msg_mailbox TMU_DMEM_SH2(msg_mailbox); ++ ++#if !defined(CONFIG_PLATFORM_LS1012A) ++static u32 CLASS_DMEM_SH2(resume); ++static u32 TMU_DMEM_SH2(resume); ++#endif ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++static struct pe_sync_mailbox UTIL_DMEM_SH2(sync_mailbox); ++static struct pe_msg_mailbox UTIL_DMEM_SH2(msg_mailbox); ++static u32 UTIL_DMEM_SH2(resume); ++#endif ++ ++static int pfe_ctrl_timer(void *data); ++ ++static int initialized = 0; ++ ++#define TIMEOUT_MS 1000 ++ ++int relax(unsigned long end) ++{ ++#ifdef __KERNEL__ ++ if (time_after(jiffies, end)) { ++ if (time_after(jiffies, end + (TIMEOUT_MS * HZ) / 1000)) { ++ return -1; ++ } ++ ++ if (need_resched()) ++ schedule(); ++ } ++#else ++ udelay(1); ++#endif ++ ++ return 0; ++} ++ ++#if !defined(CONFIG_PLATFORM_LS1012A) ++void pfe_ctrl_suspend(struct pfe_ctrl *ctrl) ++{ ++ int id; ++ ++ kthread_stop(ctrl->timer_thread); ++ ++ mutex_lock(&ctrl->mutex); ++ ++ initialized = 0; ++ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) ++ pe_dmem_write(id, cpu_to_be32(0x1), (unsigned long)virt_to_class_dmem(&class_resume), 4); ++ ++ for (id = TMU0_ID; id <= TMU_MAX_ID; id++) { ++#if defined(CONFIG_PLATFORM_LS1012A) ++ if(id == TMU2_ID) continue; ++#endif ++ pe_dmem_write(id, cpu_to_be32(0x1), (unsigned long)virt_to_class_dmem(&tmu_resume), 4); ++ } ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ pe_dmem_write(UTIL_ID, cpu_to_be32(0x1), (unsigned long)virt_to_class_dmem(&util_resume), 4); ++#endif ++ ++ pe_sync_stop(&pfe->ctrl, 0xFF); ++ ++ mutex_unlock(&ctrl->mutex); ++} ++ ++void pfe_ctrl_resume(struct pfe_ctrl *ctrl) ++{ ++ mutex_lock(&ctrl->mutex); ++ initialized = 1; ++ pe_start(&pfe->ctrl, 0xFF); ++ mutex_unlock(&ctrl->mutex); ++ ++ ctrl->timer_thread = kthread_create(pfe_ctrl_timer, ctrl, "pfe_ctrl_timer"); ++ ++ wake_up_process(ctrl->timer_thread); ++} ++#endif ++ ++/** PE sync stop. ++* Stops packet processing for a list of PE's (specified using a bitmask). ++* The caller must hold ctrl->mutex. ++* ++* @param ctrl Control context ++* @param pe_mask Mask of PE id's to stop ++* ++*/ ++int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask) ++{ ++ struct pe_sync_mailbox *mbox; ++ int pe_stopped = 0; ++ unsigned long end = jiffies + 2; ++ int i; ++ ++#if defined(CONFIG_PLATFORM_LS1012A) ++ //TODO Util should be removed after IPSec is ported ++ pe_mask &= 0x2FF; //Exclude Util + TMU2 ++#endif ++ for (i = 0; i < MAX_PE; i++) ++ if (pe_mask & (1 << i)) { ++ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; ++ ++ pe_dmem_write(i, cpu_to_be32(0x1), (unsigned long)&mbox->stop, 4); ++ } ++ ++ while (pe_stopped != pe_mask) { ++ for (i = 0; i < MAX_PE; i++) ++ if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) { ++ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; ++ ++ if (pe_dmem_read(i, (unsigned long)&mbox->stopped, 4) & cpu_to_be32(0x1)) ++ pe_stopped |= (1 << i); ++ } ++ ++ if (relax(end) < 0) ++ goto err; ++ } ++ ++ return 0; ++ ++err: ++ printk(KERN_ERR "%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped); ++ ++ for (i = 0; i < MAX_PE; i++) ++ if (pe_mask & (1 << i)) { ++ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; ++ ++ pe_dmem_write(i, cpu_to_be32(0x0), (unsigned long)&mbox->stop, 4); ++ } ++ ++ return -EIO; ++} ++ ++/** PE start. ++* Starts packet processing for a list of PE's (specified using a bitmask). ++* The caller must hold ctrl->mutex. ++* ++* @param ctrl Control context ++* @param pe_mask Mask of PE id's to start ++* ++*/ ++void pe_start(struct pfe_ctrl *ctrl, int pe_mask) ++{ ++ struct pe_sync_mailbox *mbox; ++ int i; ++ ++#if defined(CONFIG_PLATFORM_LS1012A) ++ //TODO Util should be removed after IPSec is ported ++ pe_mask &= 0x2FF; //Exclude Util + TMU2 ++#endif ++ for (i = 0; i < MAX_PE; i++) ++ if (pe_mask & (1 << i)) { ++ ++ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; ++ ++ pe_dmem_write(i, cpu_to_be32(0x0), (unsigned long)&mbox->stop, 4); ++ } ++} ++ ++ ++/** Sends a control request to a given PE (to copy data to/from internal memory from/to DDR). ++* The caller must hold ctrl->mutex. ++* ++* @param ctrl Control context ++* @param id PE id ++* @param dst Physical destination address of data ++* @param src Physical source address of data ++* @param len Data length ++* ++*/ ++int pe_request(struct pfe_ctrl *ctrl, int id, unsigned short cmd_type, unsigned long dst, unsigned long src, int len) ++{ ++ struct pe_msg_mailbox mbox = { ++ .dst = cpu_to_be32(dst), ++ .src = cpu_to_be32(src), ++ .len = cpu_to_be32(len), ++ .request = cpu_to_be32((cmd_type << 16) | 0x1), ++ }; ++ struct pe_msg_mailbox *pmbox = (void *)ctrl->msg_mailbox_baseaddr[id]; ++ unsigned long end = jiffies + 2; ++ u32 rc; ++ ++ /* This works because .request is written last */ ++ pe_dmem_memcpy_to32(id, (unsigned long)pmbox, &mbox, sizeof(mbox)); ++ ++ while ((rc = pe_dmem_read(id, (unsigned long)&pmbox->request, 4)) & cpu_to_be32(0xffff)) { ++ if (relax(end) < 0) ++ goto err; ++ } ++ ++ rc = be32_to_cpu(rc); ++ ++ return rc >> 16; ++ ++err: ++ printk(KERN_ERR "%s: timeout, %x\n", __func__, be32_to_cpu(rc)); ++ pe_dmem_write(id, cpu_to_be32(0), (unsigned long)&pmbox->request, 4); ++ return -EIO; ++} ++ ++ ++/** Control code timer thread. ++* ++* A kernel thread is used so that the timer code can be run under the control path mutex. ++* The thread wakes up regularly and checks if any timer in the timer list as expired. ++* The timers are re-started automatically. ++* The code tries to keep the number of times a timer runs per unit time constant on average, ++* if the thread scheduling is delayed, it's possible for a particular timer to be scheduled in ++* quick succession to make up for the lost time. ++* ++* @param data Pointer to the control context structure ++* ++* @return 0 on sucess, a negative value on error ++* ++*/ ++static int pfe_ctrl_timer(void *data) ++{ ++ struct pfe_ctrl *ctrl = data; ++ TIMER_ENTRY *timer, *next; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ while (1) ++ { ++ schedule_timeout_uninterruptible(ctrl->timer_period); ++ ++ mutex_lock(&ctrl->mutex); ++ ++ list_for_each_entry_safe(timer, next, &ctrl->timer_list, list) ++ { ++ if (time_after(jiffies, timer->timeout)) ++ { ++ timer->timeout += timer->period; ++ ++ timer->handler(); ++ } ++ } ++ ++ mutex_unlock(&ctrl->mutex); ++ ++ if (kthread_should_stop()) ++ break; ++ } ++ ++ printk(KERN_INFO "%s exiting\n", __func__); ++ ++ return 0; ++} ++ ++ ++int pfe_ctrl_init(struct pfe *pfe) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ int id; ++ int rc; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ mutex_init(&ctrl->mutex); ++ spin_lock_init(&ctrl->lock); ++ ++ ctrl->timer_period = HZ / TIMER_TICKS_PER_SEC; ++ ++ INIT_LIST_HEAD(&ctrl->timer_list); ++ ++ /*INIT_WORK(&ctrl->work, comcerto_fpp_workqueue);*/ ++ ++ INIT_LIST_HEAD(&ctrl->msg_list); ++ ++ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) { ++ ctrl->sync_mailbox_baseaddr[id] = virt_to_class_dmem(&class_sync_mailbox); ++ ctrl->msg_mailbox_baseaddr[id] = virt_to_class_dmem(&class_msg_mailbox); ++ } ++ ++ for (id = TMU0_ID; id <= TMU_MAX_ID; id++) { ++#if defined(CONFIG_PLATFORM_LS1012A) ++ if(id == TMU2_ID) continue; ++#endif ++ ctrl->sync_mailbox_baseaddr[id] = virt_to_tmu_dmem(&tmu_sync_mailbox); ++ ctrl->msg_mailbox_baseaddr[id] = virt_to_tmu_dmem(&tmu_msg_mailbox); ++ } ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ ctrl->sync_mailbox_baseaddr[UTIL_ID] = virt_to_util_dmem(&util_sync_mailbox); ++ ctrl->msg_mailbox_baseaddr[UTIL_ID] = virt_to_util_dmem(&util_msg_mailbox); ++#endif ++ ++ ctrl->hash_array_baseaddr = pfe->ddr_baseaddr + ROUTE_TABLE_BASEADDR; ++ ctrl->hash_array_phys_baseaddr = pfe->ddr_phys_baseaddr + ROUTE_TABLE_BASEADDR; ++ ctrl->ipsec_lmem_phys_baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR + IPSEC_LMEM_BASEADDR); ++ ctrl->ipsec_lmem_baseaddr = (LMEM_BASE_ADDR + IPSEC_LMEM_BASEADDR); ++ ++ ctrl->timer_thread = kthread_create(pfe_ctrl_timer, ctrl, "pfe_ctrl_timer"); ++ if (IS_ERR(ctrl->timer_thread)) ++ { ++ printk (KERN_ERR "%s: kthread_create() failed\n", __func__); ++ rc = PTR_ERR(ctrl->timer_thread); ++ goto err0; ++ } ++ ++ ctrl->dev = pfe->dev; ++ ++ wake_up_process(ctrl->timer_thread); ++ ++ printk(KERN_INFO "%s finished\n", __func__); ++ ++ initialized = 1; ++ ++ return 0; ++ ++err0: ++ return rc; ++} ++ ++ ++void pfe_ctrl_exit(struct pfe *pfe) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ initialized = 0; ++ ++ kthread_stop(ctrl->timer_thread); ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_ctrl.h +@@ -0,0 +1,111 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_CTRL_H_ ++#define _PFE_CTRL_H_ ++ ++#include ++ ++#include "pfe_mod.h" ++#include "pfe/pfe.h" ++ ++#define DMA_BUF_SIZE_128 0x80 /* enough for 1 conntracks */ ++#define DMA_BUF_SIZE_256 0x100 /* enough for 2 conntracks, 1 bridge entry or 1 multicast entry */ ++#define DMA_BUF_SIZE_512 0x200 /* 512bytes dma allocated buffers used by rtp relay feature */ ++#define DMA_BUF_MIN_ALIGNMENT 8 ++#define DMA_BUF_BOUNDARY (4 * 1024) /* bursts can not cross 4k boundary */ ++ ++#define CMD_TX_ENABLE 0x0501 ++#define CMD_TX_DISABLE 0x0502 ++ ++#define CMD_RX_LRO 0x0011 ++#define CMD_PKTCAP_ENABLE 0x0d01 ++#define CMD_QM_EXPT_RATE 0x020c ++ ++#define EXPT_TYPE_PCAP 0x3 ++ ++struct pfe_ctrl { ++ struct mutex mutex; ++ spinlock_t lock; ++ ++ void *dma_pool; ++ void *dma_pool_512; ++ void *dma_pool_128; ++ ++ struct device *dev; ++ ++ void *hash_array_baseaddr; /** Virtual base address of the conntrack hash array */ ++ unsigned long hash_array_phys_baseaddr; /** Physical base address of the conntrack hash array */ ++ ++ struct task_struct *timer_thread; ++ struct list_head timer_list; ++ unsigned long timer_period; ++ ++ int (*event_cb)(u16, u16, u16*); ++ ++ unsigned long sync_mailbox_baseaddr[MAX_PE]; /* Sync mailbox PFE internal address, initialized when parsing elf images */ ++ unsigned long msg_mailbox_baseaddr[MAX_PE]; /* Msg mailbox PFE internal address, initialized when parsing elf images */ ++ ++ unsigned long class_dmem_sh; ++ unsigned long class_pe_lmem_sh; ++ unsigned long tmu_dmem_sh; ++ unsigned long util_dmem_sh; ++ unsigned long util_ddr_sh; ++ struct clk *clk_axi; ++ unsigned int sys_clk; // AXI clock value, in KHz ++ void *ipsec_lmem_baseaddr; ++ unsigned long ipsec_lmem_phys_baseaddr; ++ ++ /* used for asynchronous message transfer to PFE */ ++ struct list_head msg_list; ++ struct work_struct work; ++}; ++ ++int pfe_ctrl_init(struct pfe *pfe); ++void pfe_ctrl_exit(struct pfe *pfe); ++ ++int pe_send_cmd(unsigned short cmd_type, unsigned short action, unsigned long param1, unsigned long param2); ++int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask); ++void pe_start(struct pfe_ctrl *ctrl, int pe_mask); ++int pe_request(struct pfe_ctrl *ctrl, int id,unsigned short cmd_type, unsigned long dst, unsigned long src, int len); ++int pe_read(struct pfe_ctrl *ctrl, int id, u32 *dst, unsigned long src, int len, int clear_flag); ++int tmu_pe_request(struct pfe_ctrl *ctrl, int id, unsigned int tmu_cmd_bitmask); ++ ++int pfe_ctrl_set_eth_state(int id, unsigned int state, unsigned char *mac_addr); ++int pfe_ctrl_set_lro(char enable); ++#ifdef CFG_PCAP ++int pfe_ctrl_set_pcap(char enable); ++int pfe_ctrl_set_pcap_ratelimit(u32 pkts_per_msec); ++#endif ++void pfe_ctrl_suspend(struct pfe_ctrl *ctrl); ++void pfe_ctrl_resume(struct pfe_ctrl *ctrl); ++int relax(unsigned long end); ++ ++/* used for asynchronous message transfer to PFE */ ++#define FPP_MAX_MSG_LENGTH 256 /* expressed in U8 -> 256 bytes*/ ++struct fpp_msg { ++ struct list_head list; ++ void (*callback)(unsigned long, int, u16, u16 *); ++ unsigned long data; ++ u16 fcode; ++ u16 length; ++ u16 *payload; ++}; ++ ++#endif /* _PFE_CTRL_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_ctrl_hal.c +@@ -0,0 +1,207 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* OS abstraction functions used by PFE control code */ ++ ++#include ++ ++#include "pfe_ctrl_hal.h" ++ ++#include "pfe_mod.h" ++ ++extern char *__class_dmem_sh; ++extern char *__tmu_dmem_sh; ++#if !defined(CONFIG_UTIL_DISABLED) ++extern char *__util_dmem_sh; ++extern char *__util_ddr_sh; ++#endif ++ ++HostMessage msg_buf; ++static int msg_buf_used = 0; ++unsigned long virt_to_class_dmem(void *p) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ if (p) ++ return (unsigned long)p - (unsigned long)&__class_dmem_sh + ctrl->class_dmem_sh; ++ else ++ return 0; ++} ++unsigned long virt_to_tmu_dmem(void *p) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ if (p) ++ return (unsigned long)p - (unsigned long)&__tmu_dmem_sh + ctrl->tmu_dmem_sh; ++ else ++ return 0; ++} ++ ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++unsigned long virt_to_util_dmem(void *p) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ if (p) ++ return (unsigned long)p - (unsigned long)&__util_dmem_sh + ctrl->util_dmem_sh; ++ else ++ return 0; ++} ++ ++/** Returns the DDR physical address of a Util PE shared DDR variable. ++ * ++ * @param p pointer (kernel space, virtual) to be converted to a physical address. ++ */ ++unsigned long virt_to_util_ddr(void *p) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ if (p) ++ return (unsigned long)p - (unsigned long)&__util_ddr_sh + ctrl->util_ddr_sh; ++ else ++ return 0; ++} ++/** Returns the virtual address of a Util PE shared DDR variable. ++ * ++ * @param p pointer (kernel space, virtual) to be converted to a pointer (usable in kernel space) ++ * pointing to the actual data. ++ */ ++ ++void * virt_to_util_virt(void *p) ++{ ++ if (p) ++ return DDR_PHYS_TO_VIRT(virt_to_util_ddr(p)); ++ else ++ return NULL; ++} ++#endif ++unsigned long virt_to_phys_iram(void *p) ++{ ++ if (p) ++ return (p - pfe->iram_baseaddr) + pfe->iram_phys_baseaddr; ++ else ++ return 0; ++} ++ ++unsigned long virt_to_phys_ipsec_lmem(void *p) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ if (p) ++ return (p - ctrl->ipsec_lmem_baseaddr) + ctrl->ipsec_lmem_phys_baseaddr; ++ else ++ return 0; ++} ++ ++unsigned long virt_to_phys_ipsec_axi(void *p) ++{ ++ if (p) ++ return (p - pfe->ipsec_baseaddr) + pfe->ipsec_phys_baseaddr; ++ else ++ return 0; ++} ++ ++ ++HostMessage *msg_alloc(void) ++{ ++ if (msg_buf_used) ++ { ++ printk(KERN_ERR "%s: failed\n", __func__); ++ return NULL; ++ } ++ ++ msg_buf_used = 1; ++ ++ return &msg_buf; ++} ++ ++void msg_free(HostMessage *msg) ++{ ++ if (!msg_buf_used) ++ printk(KERN_ERR "%s: freing already free msg buffer\n", __func__); ++ ++ msg_buf_used = 0; ++} ++ ++int msg_send(HostMessage *msg) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ int rc = -1; ++ ++ if (!ctrl->event_cb) ++ goto out; ++ ++ if (ctrl->event_cb(msg->code, msg->length, msg->data) < 0) ++ goto out; ++ ++ rc = 0; ++ ++out: ++ msg_free(msg); ++ ++ return rc; ++} ++ ++ ++void timer_init(TIMER_ENTRY *timer, TIMER_HANDLER handler) ++{ ++ timer->handler = handler; ++ timer->running = 0; ++} ++ ++ ++void timer_add(TIMER_ENTRY *timer, u16 granularity) ++{ ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ ++ timer->period = granularity; ++ timer->timeout = jiffies + timer->period; ++ ++ if (!timer->running) ++ { ++ list_add(&timer->list, &ctrl->timer_list); ++ timer->running = 1; ++ } ++} ++ ++ ++void timer_del(TIMER_ENTRY *timer) ++{ ++ ++ if (timer->running) ++ { ++ list_del(&timer->list); ++ timer->running = 0; ++ } ++} ++ ++ ++void *Heap_Alloc(int size) ++{ ++ /* FIXME we may want to use dma API's and use non cacheable memory */ ++ return pfe_kmalloc(size, GFP_KERNEL); ++} ++ ++ ++void Heap_Free(void *p) ++{ ++ pfe_kfree(p); ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_ctrl_hal.h +@@ -0,0 +1,129 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_CTRL_HAL_H_ ++#define _PFE_CTRL_HAL_H_ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "pfe_mod.h" ++ ++#define CLASS_DMEM_SH(var) __attribute__((section(".class_dmem_sh_" #var))) var ++#define CLASS_PE_LMEM_SH(var) __attribute__((section(".class_pe_lmem_sh_" #var))) var ++#define TMU_DMEM_SH(var) __attribute__((section(".tmu_dmem_sh_" #var))) var ++#define UTIL_DMEM_SH(var) __attribute__((section(".util_dmem_sh_" #var))) var ++#define UTIL_DDR_SH(var) __attribute__((section(".util_ddr_sh_" #var))) var ++ ++#define CLASS_DMEM_SH2(var) __attribute__((section(".class_dmem_sh_" #var))) class_##var ++#define CLASS_PE_LMEM_SH2(var) __attribute__((section(".class_pe_lmem_sh_" #var))) class_##var ++#define TMU_DMEM_SH2(var) __attribute__((section(".tmu_dmem_sh_" #var))) tmu_##var ++#define UTIL_DMEM_SH2(var) __attribute__((section(".util_dmem_sh_" #var))) util_##var ++ ++/** Translate the name of a shared variable to its PFE counterpart. ++ * Those macros may be used to determine the address of a shared variable, ++ * and will work even if the variable is accessed through a macro, as is the case ++ * with most fields of gFppGlobals. ++ */ ++#define CONCAT(str, var) str##var ++#define CLASS_VARNAME2(var) CONCAT(class_, var) ++#define UTIL_VARNAME2(var) CONCAT(util_, var) ++#define TMU_VARNAME2(var) CONCAT(tmu_, var) ++ ++typedef struct tHostMessage { ++ u16 length; ++ u16 code; ++ u16 data[128]; ++} HostMessage; ++ ++HostMessage *msg_alloc(void); ++void msg_free(HostMessage *msg); ++int msg_send(HostMessage *msg); ++ ++ ++unsigned long virt_to_class(void *p); ++unsigned long virt_to_class_dmem(void *p); ++unsigned long virt_to_class_pe_lmem(void *p); ++unsigned long virt_to_tmu_dmem(void *p); ++unsigned long virt_to_util_dmem(void *p); ++unsigned long virt_to_util_ddr(void *p); ++void * virt_to_util_virt(void *p); ++unsigned long virt_to_phys_iram(void *p); ++unsigned long virt_to_phys_ipsec_lmem(void *p); ++unsigned long virt_to_phys_ipsec_axi(void *p); ++ ++ ++#define TIMER_TICKS_PER_SEC 100 ++ ++#if TIMER_TICKS_PER_SEC > HZ ++#error TIMER_TICKS_PER_SEC is too high ++#endif ++ ++ ++typedef void (* TIMER_HANDLER)(void); ++ ++typedef struct { ++ struct list_head list; ++ unsigned long timeout; ++ unsigned long period; ++ TIMER_HANDLER handler; ++ char running; ++} TIMER_ENTRY; ++ ++ ++/** Initializes a timer structure. ++* Must be called once for each TIMER_ENTRY structure. ++* The caller must be holding the ctrl->mutex. ++* ++* @param timer pointer to the timer to be initialized ++* @param handler timer handler function pointer ++* ++*/ ++void timer_init(TIMER_ENTRY *timer, TIMER_HANDLER handler); ++ ++/** Adds a timer to the running timer list. ++* It's safe to call even if the timer was already running. In this case we just update the granularity. ++* The caller must be holding the ctrl->mutex. ++* ++* @param timer pointer to the timer to be added ++* @param granularity granularity of the timer (in timer tick units) ++* ++*/ ++void timer_add(TIMER_ENTRY *timer, u16 granularity); ++ ++/** Deletes a timer from the running timer list. ++* It's safe to call even if the timer is no longer running. ++* The caller must be holding the ctrl->mutex. ++* ++* @param timer pointer to the timer to be removed ++*/ ++void timer_del(TIMER_ENTRY *timer); ++ ++void *Heap_Alloc(int size); ++ ++#define Heap_Alloc_ARAM(s) Heap_Alloc(s) ++#define __Heap_Alloc(h, s) Heap_Alloc(s) ++void Heap_Free(void *p); ++ ++#endif /* _PFE_CTRL_HAL_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_debugfs.c +@@ -0,0 +1,109 @@ ++/* ++ * (C) Copyright 2013 ++ * Author : Freescale Technologes ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * */ ++ ++#include ++#include ++#include ++ ++#include "pfe_mod.h" ++ ++static int dmem_show(struct seq_file *s, void *unused) ++{ ++ u32 dmem_addr, val; ++ int id = (long int)s->private; ++ int i; ++ ++ for (dmem_addr = 0; dmem_addr < CLASS_DMEM_SIZE; dmem_addr += 8 * 4) { ++ seq_printf(s, "%04x:", dmem_addr); ++ ++ for (i = 0; i < 8; i++) { ++ val = pe_dmem_read(id, dmem_addr + i * 4, 4); ++ seq_printf(s, " %02x %02x %02x %02x", val & 0xff, (val >> 8) & 0xff, (val >> 16) & 0xff, (val >> 24) & 0xff); ++ } ++ ++ seq_printf(s, "\n"); ++ } ++ ++ return 0; ++} ++ ++static int dmem_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, dmem_show, inode->i_private); ++} ++ ++static const struct file_operations dmem_fops = { ++ .open = dmem_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++int pfe_debugfs_init(struct pfe *pfe) ++{ ++ struct dentry *d; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ pfe->dentry = debugfs_create_dir("pfe", NULL); ++ if (IS_ERR_OR_NULL(pfe->dentry)) ++ goto err_dir; ++ ++ d = debugfs_create_file("pe0_dmem", S_IRUGO, pfe->dentry, (void *)0, &dmem_fops); ++ if (IS_ERR_OR_NULL(d)) ++ goto err_pe; ++ ++ d = debugfs_create_file("pe1_dmem", S_IRUGO, pfe->dentry, (void *)1, &dmem_fops); ++ if (IS_ERR_OR_NULL(d)) ++ goto err_pe; ++ ++ d = debugfs_create_file("pe2_dmem", S_IRUGO, pfe->dentry, (void *)2, &dmem_fops); ++ if (IS_ERR_OR_NULL(d)) ++ goto err_pe; ++ ++ d = debugfs_create_file("pe3_dmem", S_IRUGO, pfe->dentry, (void *)3, &dmem_fops); ++ if (IS_ERR_OR_NULL(d)) ++ goto err_pe; ++ ++ d = debugfs_create_file("pe4_dmem", S_IRUGO, pfe->dentry, (void *)4, &dmem_fops); ++ if (IS_ERR_OR_NULL(d)) ++ goto err_pe; ++ ++ d = debugfs_create_file("pe5_dmem", S_IRUGO, pfe->dentry, (void *)5, &dmem_fops); ++ if (IS_ERR_OR_NULL(d)) ++ goto err_pe; ++ ++ return 0; ++ ++err_pe: ++ debugfs_remove_recursive(pfe->dentry); ++ ++err_dir: ++ return -1; ++} ++ ++void pfe_debugfs_exit(struct pfe *pfe) ++{ ++ debugfs_remove_recursive(pfe->dentry); ++} ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_debugfs.h +@@ -0,0 +1,8 @@ ++#ifndef _PFE_DEBUGFS_H_ ++#define _PFE_DEBUGFS_H_ ++ ++int pfe_debugfs_init(struct pfe *pfe); ++void pfe_debugfs_exit(struct pfe *pfe); ++#endif /* _PFE_DEBUGFS_H_ */ ++ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_eth.c +@@ -0,0 +1,2956 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/** @pfe_eth.c. ++ * Ethernet driver for to handle exception path for PFE. ++ * - uses HIF functions to send/receive packets. ++ * - uses ctrl function to start/stop interfaces. ++ * - uses direct register accesses to control phy operation. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#if defined(CONFIG_NF_CONNTRACK_MARK) ++#include ++#endif ++ ++#include "pfe_mod.h" ++#include "pfe_eth.h" ++ ++const char comcerto_eth_driver_version[]="1.0"; ++static void *cbus_emac_base[3]; ++static void *cbus_gpi_base[3]; ++ ++/* Forward Declaration */ ++static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv); ++static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv, int force); ++static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int txQ_num, int from_tx, int n_desc); ++ ++#if defined(CONFIG_PLATFORM_C2000) ++static void pfe_eth_set_device_wakeup(struct pfe *pfe); ++ ++ ++ ++unsigned int gemac_regs[] = { ++ 0x0000, /* Network control */ ++ 0x0004, /* Network configuration */ ++ 0x0008, /* Network status */ ++ 0x0010, /* DMA configuration */ ++ 0x0014, /* Transmit status */ ++ 0x0020, /* Receive status */ ++ 0x0024, /* Interrupt status */ ++ 0x0030, /* Interrupt mask */ ++ 0x0038, /* Received pause quantum */ ++ 0x003c, /* Transmit pause quantum */ ++ 0x0080, /* Hash register bottom [31:0] */ ++ 0x0084, /* Hash register bottom [63:32] */ ++ 0x0088, /* Specific address 1 bottom [31:0] */ ++ 0x008c, /* Specific address 1 top [47:32] */ ++ 0x0090, /* Specific address 2 bottom [31:0] */ ++ 0x0094, /* Specific address 2 top [47:32] */ ++ 0x0098, /* Specific address 3 bottom [31:0] */ ++ 0x009c, /* Specific address 3 top [47:32] */ ++ 0x00a0, /* Specific address 4 bottom [31:0] */ ++ 0x00a4, /* Specific address 4 top [47:32] */ ++ 0x00a8, /* Type ID Match 1 */ ++ 0x00ac, /* Type ID Match 2 */ ++ 0x00b0, /* Type ID Match 3 */ ++ 0x00b4, /* Type ID Match 4 */ ++ 0x00b8, /* Wake Up ON LAN */ ++ 0x00bc, /* IPG stretch register */ ++ 0x00c0, /* Stacked VLAN Register */ ++ 0x00fc, /* Module ID */ ++ 0x07a0 /* EMAC Control register */ ++}; ++#else ++unsigned int gemac_regs[] = { ++ 0x0004, /*Interrupt event */ ++ 0x0008, /*Interrupt mask */ ++ 0x0024, /*Ethernet control */ ++ 0x0064, /*MIB Control/Status */ ++ 0x0084, /*Receive control/status */ ++ 0x00C4, /*Transmit control */ ++ 0x00E4, /*Physical address low */ ++ 0x00E8, /*Physical address high */ ++ 0x0144, /*Transmit FIFO Watermark and Store and Forward Control*/ ++ 0x0190, /* Receive FIFO Section Full Threshold */ ++ 0x01A0, /* Transmit FIFO Section Empty Threshold */ ++ 0x01B0, /* Frame Truncation Length */ ++}; ++#endif ++/********************************************************************/ ++/* SYSFS INTERFACE */ ++/********************************************************************/ ++ ++ ++ ++#ifdef PFE_ETH_NAPI_STATS ++/* ++ * pfe_eth_show_napi_stats ++ */ ++static ssize_t pfe_eth_show_napi_stats(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); ++ ssize_t len = 0; ++ ++ len += sprintf(buf + len, "sched: %u\n", priv->napi_counters[NAPI_SCHED_COUNT]); ++ len += sprintf(buf + len, "poll: %u\n", priv->napi_counters[NAPI_POLL_COUNT]); ++ len += sprintf(buf + len, "packet: %u\n", priv->napi_counters[NAPI_PACKET_COUNT]); ++ len += sprintf(buf + len, "budget: %u\n", priv->napi_counters[NAPI_FULL_BUDGET_COUNT]); ++ len += sprintf(buf + len, "desc: %u\n", priv->napi_counters[NAPI_DESC_COUNT]); ++ ++ return len; ++} ++ ++/* ++ * pfe_eth_set_napi_stats ++ */ ++static ssize_t pfe_eth_set_napi_stats(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); ++ ++ memset(priv->napi_counters, 0, sizeof(priv->napi_counters)); ++ ++ return count; ++} ++#endif ++#ifdef PFE_ETH_TX_STATS ++/** pfe_eth_show_tx_stats ++ * ++ */ ++static ssize_t pfe_eth_show_tx_stats(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); ++ ssize_t len = 0; ++ int i; ++ ++ len += sprintf(buf + len, "TX queues stats:\n"); ++ ++ for (i = 0; i < emac_txq_cnt; i++) { ++ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->dev, i); ++ ++ len += sprintf(buf + len, "\n"); ++ __netif_tx_lock_bh(tx_queue); ++ ++ hif_tx_lock(&pfe->hif); ++ len += sprintf(buf + len, "Queue %2d : credits = %10d\n", i, hif_lib_tx_credit_avail(pfe, priv->id, i)); ++ len += sprintf(buf + len, " tx packets = %10d\n", pfe->tmu_credit.tx_packets[priv->id][i]); ++ hif_tx_unlock(&pfe->hif); ++ ++ /* Don't output additionnal stats if queue never used */ ++ if (!pfe->tmu_credit.tx_packets[priv->id][i]) ++ goto skip; ++ ++ len += sprintf(buf + len, " clean_fail = %10d\n", priv->clean_fail[i]); ++ len += sprintf(buf + len, " stop_queue = %10d\n", priv->stop_queue_total[i]); ++ len += sprintf(buf + len, " stop_queue_hif = %10d\n", priv->stop_queue_hif[i]); ++ len += sprintf(buf + len, " stop_queue_hif_client = %10d\n", priv->stop_queue_hif_client[i]); ++ len += sprintf(buf + len, " stop_queue_credit = %10d\n", priv->stop_queue_credit[i]); ++skip: ++ __netif_tx_unlock_bh(tx_queue); ++ } ++ return len; ++} ++ ++/** pfe_eth_set_tx_stats ++ * ++ */ ++static ssize_t pfe_eth_set_tx_stats(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t count) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); ++ int i; ++ ++ for (i = 0; i < emac_txq_cnt; i++) { ++ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->dev, i); ++ ++ __netif_tx_lock_bh(tx_queue); ++ priv->clean_fail[i] = 0; ++ priv->stop_queue_total[i] = 0; ++ priv->stop_queue_hif[i] = 0; ++ priv->stop_queue_hif_client[i]= 0; ++ priv->stop_queue_credit[i] = 0; ++ __netif_tx_unlock_bh(tx_queue); ++ } ++ ++ return count; ++} ++#endif ++/** pfe_eth_show_txavail ++ * ++ */ ++static ssize_t pfe_eth_show_txavail(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); ++ ssize_t len = 0; ++ int i; ++ ++ for (i = 0; i < emac_txq_cnt; i++) { ++ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->dev, i); ++ ++ __netif_tx_lock_bh(tx_queue); ++ ++ len += sprintf(buf + len, "%d", hif_lib_tx_avail(&priv->client, i)); ++ ++ __netif_tx_unlock_bh(tx_queue); ++ ++ if (i == (emac_txq_cnt - 1)) ++ len += sprintf(buf + len, "\n"); ++ else ++ len += sprintf(buf + len, " "); ++ } ++ ++ return len; ++} ++ ++ ++/** pfe_eth_show_default_priority ++ * ++ */ ++static ssize_t pfe_eth_show_default_priority(struct device *dev, ++ struct device_attribute *attr, ++ char *buf) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); ++ unsigned long flags; ++ int rc; ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ rc = sprintf(buf, "%d\n", priv->default_priority); ++ spin_unlock_irqrestore(&priv->lock, flags); ++ ++ return rc; ++} ++ ++/** pfe_eth_set_default_priority ++ * ++ */ ++ ++static ssize_t pfe_eth_set_default_priority(struct device *dev, ++ struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ priv->default_priority = simple_strtoul(buf, NULL, 0); ++ spin_unlock_irqrestore(&priv->lock, flags); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(txavail, 0444, pfe_eth_show_txavail, NULL); ++static DEVICE_ATTR(default_priority, 0644, pfe_eth_show_default_priority, pfe_eth_set_default_priority); ++ ++#ifdef PFE_ETH_NAPI_STATS ++static DEVICE_ATTR(napi_stats, 0644, pfe_eth_show_napi_stats, pfe_eth_set_napi_stats); ++#endif ++ ++#ifdef PFE_ETH_TX_STATS ++static DEVICE_ATTR(tx_stats, 0644, pfe_eth_show_tx_stats, pfe_eth_set_tx_stats); ++#endif ++ ++ ++/** pfe_eth_sysfs_init ++ * ++ */ ++static int pfe_eth_sysfs_init(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int err; ++ ++ /* Initialize the default values */ ++ /* By default, packets without conntrack will use this default high priority queue */ ++ priv->default_priority = 15; ++ ++ /* Create our sysfs files */ ++ err = device_create_file(&dev->dev, &dev_attr_default_priority); ++ if (err) { ++ netdev_err(dev, "failed to create default_priority sysfs files\n"); ++ goto err_priority; ++ } ++ ++ err = device_create_file(&dev->dev, &dev_attr_txavail); ++ if (err) { ++ netdev_err(dev, "failed to create default_priority sysfs files\n"); ++ goto err_txavail; ++ } ++ ++#ifdef PFE_ETH_NAPI_STATS ++ err = device_create_file(&dev->dev, &dev_attr_napi_stats); ++ if (err) { ++ netdev_err(dev, "failed to create napi stats sysfs files\n"); ++ goto err_napi; ++ } ++#endif ++ ++#ifdef PFE_ETH_TX_STATS ++ err = device_create_file(&dev->dev, &dev_attr_tx_stats); ++ if (err) { ++ netdev_err(dev, "failed to create tx stats sysfs files\n"); ++ goto err_tx; ++ } ++#endif ++ ++ return 0; ++ ++#ifdef PFE_ETH_TX_STATS ++err_tx: ++#endif ++#ifdef PFE_ETH_NAPI_STATS ++ device_remove_file(&dev->dev, &dev_attr_napi_stats); ++ ++err_napi: ++#endif ++ device_remove_file(&dev->dev, &dev_attr_txavail); ++ ++err_txavail: ++ device_remove_file(&dev->dev, &dev_attr_default_priority); ++ ++err_priority: ++ return -1; ++} ++ ++/** pfe_eth_sysfs_exit ++ * ++ */ ++void pfe_eth_sysfs_exit(struct net_device *dev) ++{ ++#ifdef PFE_ETH_TX_STATS ++ device_remove_file(&dev->dev, &dev_attr_tx_stats); ++#endif ++ ++#ifdef PFE_ETH_NAPI_STATS ++ device_remove_file(&dev->dev, &dev_attr_napi_stats); ++#endif ++ device_remove_file(&dev->dev, &dev_attr_txavail); ++ device_remove_file(&dev->dev, &dev_attr_default_priority); ++} ++ ++/*************************************************************************/ ++/* ETHTOOL INTERCAE */ ++/*************************************************************************/ ++ ++#if defined(CONFIG_PLATFORM_C2000) ++static char stat_gstrings[][ETH_GSTRING_LEN] = { ++ "tx- octets", ++ "tx- packets", ++ "tx- broadcast", ++ "tx- multicast", ++ "tx- pause", ++ "tx- 64 bytes packets", ++ "tx- 64 - 127 bytes packets", ++ "tx- 128 - 255 bytes packets", ++ "tx- 256 - 511 bytes packets", ++ "tx- 512 - 1023 bytes packets", ++ "tx- 1024 - 1518 bytes packets", ++ "tx- > 1518 bytes packets", ++ "tx- underruns - errors", ++ "tx- single collision", ++ "tx- multi collision", ++ "tx- exces. collision - errors", ++ "tx- late collision - errors", ++ "tx- deferred", ++ "tx- carrier sense - errors", ++ "rx- octets", ++ "rx- packets", ++ "rx- broadcast", ++ "rx- multicast", ++ "rx- pause", ++ "rx- 64 bytes packets", ++ "rx- 64 - 127 bytes packets", ++ "rx- 128 - 255 bytes packets", ++ "rx- 256 - 511 bytes packets", ++ "rx- 512 - 1023 bytes packets", ++ "rx- 1024 - 1518 bytes packets", ++ "rx- > 1518 bytes packets", ++ "rx- undersize -errors", ++ "rx- oversize - errors ", ++ "rx- jabbers - errors", ++ "rx- fcs - errors", ++ "rx- length - errors", ++ "rx- symbol - errors", ++ "rx- align - errors", ++ "rx- ressource - errors", ++ "rx- overrun - errors", ++ "rx- IP cksum - errors", ++ "rx- TCP cksum - errors", ++ "rx- UDP cksum - errors" ++}; ++ ++ ++/** ++ * pfe_eth_gstrings - Fill in a buffer with the strings which correspond to ++ * the stats. ++ * ++ */ ++static void pfe_eth_gstrings(struct net_device *dev, u32 stringset, u8 * buf) ++{ ++ switch (stringset) { ++ case ETH_SS_STATS: ++ memcpy(buf, stat_gstrings, (EMAC_RMON_LEN - 2) * ETH_GSTRING_LEN); ++ break; ++ ++ default: ++ WARN_ON(1); ++ break; ++ } ++} ++ ++/** ++ * pfe_eth_fill_stats - Fill in an array of 64-bit statistics from ++ * various sources. This array will be appended ++ * to the end of the ethtool_stats* structure, and ++ * returned to user space ++ */ ++static void pfe_eth_fill_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 * buf) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int i; ++ for (i=0;iEMAC_baseaddr + EMAC_RMON_BASE_OFST + (i << 2)); ++ if ( ( i == EMAC_RMON_TXBYTES_POS ) || ( i == EMAC_RMON_RXBYTES_POS ) ){ ++ i++; ++ *buf |= (u64)readl(priv->EMAC_baseaddr + EMAC_RMON_BASE_OFST + (i << 2)) << 32; ++ } ++ } ++ ++} ++ ++/** ++ * pfe_eth_stats_count - Returns the number of stats (and their corresponding strings) ++ * ++ */ ++static int pfe_eth_stats_count(struct net_device *dev, int sset) ++{ ++ switch (sset) { ++ case ETH_SS_STATS: ++ return EMAC_RMON_LEN - 2; ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++#if defined(CONFIG_PLATFORM_C2000) ++/** ++ * pfe_eth_set_wol - Set the magic packet option, in WoL register. ++ * ++ */ ++static int pfe_eth_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ if (wol->wolopts & ~(WAKE_MAGIC | WAKE_ARP | WAKE_MCAST | WAKE_UCAST)) ++ return -EOPNOTSUPP; ++ ++ priv->wol = 0; ++ ++ if (wol->wolopts & WAKE_MAGIC) ++ priv->wol |= EMAC_WOL_MAGIC; ++ if (wol->wolopts & WAKE_ARP) ++ priv->wol |= EMAC_WOL_ARP; ++ if (wol->wolopts & WAKE_MCAST) ++ priv->wol |= EMAC_WOL_MULTI; ++ if (wol->wolopts & WAKE_UCAST) ++ priv->wol |= EMAC_WOL_SPEC_ADDR; ++ ++ pfe_eth_set_device_wakeup(priv->pfe); ++ ++ return 0; ++} ++ ++/** ++ * ++ * pfe_eth_get_wol - Get the WoL options. ++ * ++ */ ++static void pfe_eth_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ wol->supported = (WAKE_MAGIC | WAKE_ARP | WAKE_MCAST | WAKE_UCAST); ++ wol->wolopts = 0; ++ ++ if(priv->wol & EMAC_WOL_MAGIC) ++ wol->wolopts |= WAKE_MAGIC; ++ if(priv->wol & EMAC_WOL_ARP) ++ wol->wolopts |= WAKE_ARP; ++ if(priv->wol & EMAC_WOL_MULTI) ++ wol->wolopts |= WAKE_UCAST; ++ if(priv->wol & EMAC_WOL_SPEC_ADDR) ++ wol->wolopts |= WAKE_UCAST; ++ ++ memset(&wol->sopass, 0, sizeof(wol->sopass)); ++} ++#endif ++/** ++ * pfe_eth_gemac_reglen - Return the length of the register structure. ++ * ++ */ ++static int pfe_eth_gemac_reglen(struct net_device *dev) ++{ ++ return (sizeof (gemac_regs)/ sizeof(u32)) + (( MAX_UC_SPEC_ADDR_REG - 3 ) * 2); ++} ++ ++/** ++ * pfe_eth_gemac_get_regs - Return the gemac register structure. ++ * ++ */ ++static void pfe_eth_gemac_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) ++{ ++ int i,j; ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ u32 *buf = (u32 *) regbuf; ++ ++ for (i = 0; i < sizeof (gemac_regs) / sizeof (u32); i++) ++ buf[i] = readl( priv->EMAC_baseaddr + gemac_regs[i] ); ++ ++ for (j = 0; j < (( MAX_UC_SPEC_ADDR_REG - 3 ) * 2); j++,i++) ++ buf[i] = readl( priv->EMAC_baseaddr + EMAC_SPEC5_ADD_BOT + (j<<2) ); ++ ++} ++ ++ ++#else //if defined(CONFIG_PLATFORM_C2000) ++/*MTIP GEMAC */ ++static const struct fec_stat { ++ char name[ETH_GSTRING_LEN]; ++ u16 offset; ++} fec_stats[] = { ++ /* RMON TX */ ++ { "tx_dropped", RMON_T_DROP }, ++ { "tx_packets", RMON_T_PACKETS }, ++ { "tx_broadcast", RMON_T_BC_PKT }, ++ { "tx_multicast", RMON_T_MC_PKT }, ++ { "tx_crc_errors", RMON_T_CRC_ALIGN }, ++ { "tx_undersize", RMON_T_UNDERSIZE }, ++ { "tx_oversize", RMON_T_OVERSIZE }, ++ { "tx_fragment", RMON_T_FRAG }, ++ { "tx_jabber", RMON_T_JAB }, ++ { "tx_collision", RMON_T_COL }, ++ { "tx_64byte", RMON_T_P64 }, ++ { "tx_65to127byte", RMON_T_P65TO127 }, ++ { "tx_128to255byte", RMON_T_P128TO255 }, ++ { "tx_256to511byte", RMON_T_P256TO511 }, ++ { "tx_512to1023byte", RMON_T_P512TO1023 }, ++ { "tx_1024to2047byte", RMON_T_P1024TO2047 }, ++ { "tx_GTE2048byte", RMON_T_P_GTE2048 }, ++ { "tx_octets", RMON_T_OCTETS }, ++ ++ /* IEEE TX */ ++ { "IEEE_tx_drop", IEEE_T_DROP }, ++ { "IEEE_tx_frame_ok", IEEE_T_FRAME_OK }, ++ { "IEEE_tx_1col", IEEE_T_1COL }, ++ { "IEEE_tx_mcol", IEEE_T_MCOL }, ++ { "IEEE_tx_def", IEEE_T_DEF }, ++ { "IEEE_tx_lcol", IEEE_T_LCOL }, ++ { "IEEE_tx_excol", IEEE_T_EXCOL }, ++ { "IEEE_tx_macerr", IEEE_T_MACERR }, ++ { "IEEE_tx_cserr", IEEE_T_CSERR }, ++ { "IEEE_tx_sqe", IEEE_T_SQE }, ++ { "IEEE_tx_fdxfc", IEEE_T_FDXFC }, ++ { "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK }, ++ ++ /* RMON RX */ ++ { "rx_packets", RMON_R_PACKETS }, ++ { "rx_broadcast", RMON_R_BC_PKT }, ++ { "rx_multicast", RMON_R_MC_PKT }, ++ { "rx_crc_errors", RMON_R_CRC_ALIGN }, ++ { "rx_undersize", RMON_R_UNDERSIZE }, ++ { "rx_oversize", RMON_R_OVERSIZE }, ++ { "rx_fragment", RMON_R_FRAG }, ++ { "rx_jabber", RMON_R_JAB }, ++ { "rx_64byte", RMON_R_P64 }, ++ { "rx_65to127byte", RMON_R_P65TO127 }, ++ { "rx_128to255byte", RMON_R_P128TO255 }, ++ { "rx_256to511byte", RMON_R_P256TO511 }, ++ { "rx_512to1023byte", RMON_R_P512TO1023 }, ++ { "rx_1024to2047byte", RMON_R_P1024TO2047 }, ++ { "rx_GTE2048byte", RMON_R_P_GTE2048 }, ++ { "rx_octets", RMON_R_OCTETS }, ++ ++ /* IEEE RX */ ++ { "IEEE_rx_drop", IEEE_R_DROP }, ++ { "IEEE_rx_frame_ok", IEEE_R_FRAME_OK }, ++ { "IEEE_rx_crc", IEEE_R_CRC }, ++ { "IEEE_rx_align", IEEE_R_ALIGN }, ++ { "IEEE_rx_macerr", IEEE_R_MACERR }, ++ { "IEEE_rx_fdxfc", IEEE_R_FDXFC }, ++ { "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK }, ++}; ++ ++static void pfe_eth_fill_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(fec_stats); i++) ++ data[i] = readl(priv->EMAC_baseaddr + fec_stats[i].offset); ++} ++ ++static void pfe_eth_gstrings(struct net_device *netdev, ++ u32 stringset, u8 *data) ++{ ++ int i; ++ switch (stringset) { ++ case ETH_SS_STATS: ++ for (i = 0; i < ARRAY_SIZE(fec_stats); i++) ++ memcpy(data + i * ETH_GSTRING_LEN, ++ fec_stats[i].name, ETH_GSTRING_LEN); ++ break; ++ } ++} ++ ++static int pfe_eth_stats_count(struct net_device *dev, int sset) ++{ ++ switch (sset) { ++ case ETH_SS_STATS: ++ return ARRAY_SIZE(fec_stats); ++ default: ++ return -EOPNOTSUPP; ++ } ++} ++ ++/** ++ * pfe_eth_gemac_reglen - Return the length of the register structure. ++ * ++ */ ++static int pfe_eth_gemac_reglen(struct net_device *dev) ++{ ++ printk("%s() \n", __func__); ++ return (sizeof (gemac_regs)/ sizeof(u32)) ; ++} ++ ++/** ++ * pfe_eth_gemac_get_regs - Return the gemac register structure. ++ * ++ */ ++static void pfe_eth_gemac_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf) ++{ ++ int i; ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ u32 *buf = (u32 *) regbuf; ++ ++ printk("%s() \n", __func__); ++ for (i = 0; i < sizeof (gemac_regs) / sizeof (u32); i++) ++ buf[i] = readl( priv->EMAC_baseaddr + gemac_regs[i] ); ++ ++} ++ ++ ++#endif ++ ++/** ++ * pfe_eth_get_drvinfo - Fills in the drvinfo structure with some basic info ++ * ++ */ ++static void pfe_eth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) ++{ ++ strncpy(drvinfo->driver, DRV_NAME, COMCERTO_INFOSTR_LEN); ++ strncpy(drvinfo->version, comcerto_eth_driver_version, COMCERTO_INFOSTR_LEN); ++ strncpy(drvinfo->fw_version, "N/A", COMCERTO_INFOSTR_LEN); ++ strncpy(drvinfo->bus_info, "N/A", COMCERTO_INFOSTR_LEN); ++ drvinfo->testinfo_len = 0; ++ drvinfo->regdump_len = 0; ++ drvinfo->eedump_len = 0; ++} ++ ++/** ++ * pfe_eth_set_settings - Used to send commands to PHY. ++ * ++ */ ++ ++static int pfe_eth_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ struct phy_device *phydev = priv->phydev; ++ ++ if (NULL == phydev) ++ return -ENODEV; ++ ++ return phy_ethtool_sset(phydev, cmd); ++} ++ ++ ++/** ++ * pfe_eth_getsettings - Return the current settings in the ethtool_cmd structure. ++ * ++ */ ++static int pfe_eth_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ struct phy_device *phydev = priv->phydev; ++ ++ if (NULL == phydev) ++ return -ENODEV; ++ ++ return phy_ethtool_gset(phydev, cmd); ++} ++ ++ ++/** ++ * pfe_eth_get_msglevel - Gets the debug message mask. ++ * ++ */ ++static uint32_t pfe_eth_get_msglevel(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ return priv->msg_enable; ++} ++ ++/** ++ * pfe_eth_set_msglevel - Sets the debug message mask. ++ * ++ */ ++static void pfe_eth_set_msglevel(struct net_device *dev, uint32_t data) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ priv->msg_enable = data; ++} ++ ++#define HIF_RX_COAL_MAX_CLKS (~(1<<31)) ++#define HIF_RX_COAL_CLKS_PER_USEC (pfe->ctrl.sys_clk/1000) ++#define HIF_RX_COAL_MAX_USECS (HIF_RX_COAL_MAX_CLKS/HIF_RX_COAL_CLKS_PER_USEC) ++ ++/** ++ * pfe_eth_set_coalesce - Sets rx interrupt coalescing timer. ++ * ++ */ ++static int pfe_eth_set_coalesce(struct net_device *dev, ++ struct ethtool_coalesce *ec) ++{ ++ if (ec->rx_coalesce_usecs > HIF_RX_COAL_MAX_USECS) ++ return -EINVAL; ++ ++ if (!ec->rx_coalesce_usecs) { ++ writel(0, HIF_INT_COAL); ++ return 0; ++ } ++ ++ writel((ec->rx_coalesce_usecs * HIF_RX_COAL_CLKS_PER_USEC) | HIF_INT_COAL_ENABLE, HIF_INT_COAL); ++ ++ return 0; ++} ++ ++/** ++ * pfe_eth_get_coalesce - Gets rx interrupt coalescing timer value. ++ * ++ */ ++static int pfe_eth_get_coalesce(struct net_device *dev, ++ struct ethtool_coalesce *ec) ++{ ++ int reg_val = readl(HIF_INT_COAL); ++ ++ if (reg_val & HIF_INT_COAL_ENABLE) ++ ec->rx_coalesce_usecs = (reg_val & HIF_RX_COAL_MAX_CLKS) / HIF_RX_COAL_CLKS_PER_USEC; ++ else ++ ec->rx_coalesce_usecs = 0; ++ ++ return 0; ++} ++ ++#if defined(CONFIG_PLATFORM_C2000) ++/** ++ * pfe_eth_pause_rx_enabled - Tests if pause rx is enabled on GEM ++ * ++ */ ++static int pfe_eth_pause_rx_enabled(struct pfe_eth_priv_s *priv) ++{ ++ return (readl(priv->EMAC_baseaddr + EMAC_NETWORK_CONFIG) & EMAC_ENABLE_PAUSE_RX) != 0; ++} ++ ++/** ++ * pfe_eth_set_pauseparam - Sets pause parameters ++ * ++ */ ++static int pfe_eth_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ if (epause->rx_pause) ++ { ++ gemac_enable_pause_rx(priv->EMAC_baseaddr); ++ if (priv->phydev) ++ priv->phydev->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; ++ } ++ else ++ { ++ gemac_disable_pause_rx(priv->EMAC_baseaddr); ++ if (priv->phydev) ++ priv->phydev->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause); ++ } ++ ++ return 0; ++} ++ ++/** ++ * pfe_eth_get_pauseparam - Gets pause parameters ++ * ++ */ ++static void pfe_eth_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ epause->autoneg = 0; ++ epause->tx_pause = 0; ++ epause->rx_pause = pfe_eth_pause_rx_enabled(priv); ++} ++ ++/** pfe_eth_get_hash ++ */ ++static int pfe_eth_get_hash(u8 * addr) ++{ ++ u8 temp1,temp2,temp3,temp4,temp5,temp6,temp7,temp8; ++ temp1 = addr[0] & 0x3F ; ++ temp2 = ((addr[0] & 0xC0) >> 6)| ((addr[1] & 0x0F) << 2); ++ temp3 = ((addr[1] & 0xF0) >> 4) | ((addr[2] & 0x03) << 4); ++ temp4 = (addr[2] & 0xFC) >> 2; ++ temp5 = addr[3] & 0x3F; ++ temp6 = ((addr[3] & 0xC0) >> 6) | ((addr[4] & 0x0F) << 2); ++ temp7 = ((addr[4] & 0xF0) >>4 ) | ((addr[5] & 0x03) << 4); ++ temp8 = ((addr[5] &0xFC) >> 2); ++ return (temp1 ^ temp2 ^ temp3 ^ temp4 ^ temp5 ^ temp6 ^ temp7 ^ temp8); ++} ++ ++#else ++ /*TODO Add pause frame support for LS1012A */ ++ ++/** pfe_eth_get_hash ++ */ ++#define HASH_BITS 6 /* #bits in hash */ ++#define CRC32_POLY 0xEDB88320 ++ ++static int pfe_eth_get_hash(u8 * addr) ++{ ++ unsigned int i, bit, data, crc, hash; ++ ++ /* calculate crc32 value of mac address */ ++ crc = 0xffffffff; ++ ++ for (i = 0; i < 6; i++) { ++ data = addr[i]; ++ for (bit = 0; bit < 8; bit++, data >>= 1) { ++ crc = (crc >> 1) ^ ++ (((crc ^ data) & 1) ? CRC32_POLY : 0); ++ } ++ } ++ ++ /* only upper 6 bits (HASH_BITS) are used ++ * which point to specific bit in he hash registers ++ */ ++ hash = (crc >> (32 - HASH_BITS)) & 0x3f; ++ ++ return hash; ++} ++ ++#endif ++ ++struct ethtool_ops pfe_ethtool_ops = { ++ .get_settings = pfe_eth_get_settings, ++ .set_settings = pfe_eth_set_settings, ++ .get_drvinfo = pfe_eth_get_drvinfo, ++ .get_regs_len = pfe_eth_gemac_reglen, ++ .get_regs = pfe_eth_gemac_get_regs, ++ .get_link = ethtool_op_get_link, ++#if defined(CONFIG_PLATFORM_C2000) ++ .get_wol = pfe_eth_get_wol, ++ .set_wol = pfe_eth_set_wol, ++ .set_pauseparam = pfe_eth_set_pauseparam, ++ .get_pauseparam = pfe_eth_get_pauseparam, ++#endif ++ .get_strings = pfe_eth_gstrings, ++ .get_sset_count = pfe_eth_stats_count, ++ .get_ethtool_stats = pfe_eth_fill_stats, ++ .get_msglevel = pfe_eth_get_msglevel, ++ .set_msglevel = pfe_eth_set_msglevel, ++ .set_coalesce = pfe_eth_set_coalesce, ++ .get_coalesce = pfe_eth_get_coalesce, ++}; ++ ++ ++ ++#if defined(CONFIG_PLATFORM_C2000) ++/** pfe_eth_mdio_reset ++ */ ++int pfe_eth_mdio_reset(struct mii_bus *bus) ++{ ++ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ ++ netif_info(priv, hw, priv->dev, "%s\n", __func__); ++ ++#if !defined(CONFIG_PLATFORM_EMULATION) ++ mutex_lock(&bus->mdio_lock); ++ ++ /* Setup the MII Mgmt clock speed */ ++ if (priv->mii_bus) ++ gemac_set_mdc_div(priv->EMAC_baseaddr, priv->mdc_div); ++ ++ /* Reset the management interface */ ++ __raw_writel(__raw_readl(priv->EMAC_baseaddr + EMAC_NETWORK_CONTROL) | EMAC_MDIO_EN, ++ priv->EMAC_baseaddr + EMAC_NETWORK_CONTROL); ++ ++ /* Wait until the bus is free */ ++ while(!(__raw_readl(priv->EMAC_baseaddr + EMAC_NETWORK_STATUS) & EMAC_PHY_IDLE)); ++ ++ mutex_unlock(&bus->mdio_lock); ++#endif ++ ++ return 0; ++} ++ ++ ++/** pfe_eth_gemac_phy_timeout ++ * ++ */ ++static int pfe_eth_gemac_phy_timeout(struct pfe_eth_priv_s *priv, int timeout) ++{ ++ while(!(__raw_readl(priv->EMAC_baseaddr + EMAC_NETWORK_STATUS) & EMAC_PHY_IDLE)) { ++ ++ if (timeout-- <= 0) { ++ return -1; ++ } ++ ++ udelay(10); ++ } ++ ++ return 0; ++} ++ ++ ++/** pfe_eth_mdio_write ++ */ ++static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) ++{ ++ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ u32 write_data; ++ ++#if !defined(CONFIG_PLATFORM_EMULATION) ++ ++ netif_info(priv, hw, priv->dev, "%s: phy %d\n", __func__, mii_id); ++ ++// netif_info(priv, hw, priv->dev, "%s %d %d %x\n", bus->id, mii_id, regnum, value); ++ ++ write_data = 0x50020000; ++ write_data |= ((mii_id << 23) | (regnum << 18) | value); ++ __raw_writel(write_data, priv->EMAC_baseaddr + EMAC_PHY_MANAGEMENT); ++ ++ if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)){ ++ netdev_err(priv->dev, "%s: phy MDIO write timeout\n", __func__); ++ return -1; ++ } ++ ++#endif ++ ++ return 0; ++} ++ ++ ++/** pfe_eth_mdio_read ++ */ ++static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum) ++{ ++ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ u16 value = 0; ++ u32 write_data; ++ ++#if !defined(CONFIG_PLATFORM_EMULATION) ++ netif_info(priv, hw, priv->dev, "%s: phy %d\n", __func__, mii_id); ++ ++ write_data = 0x60020000; ++ write_data |= ((mii_id << 23) | (regnum << 18)); ++ ++ __raw_writel(write_data, priv->EMAC_baseaddr + EMAC_PHY_MANAGEMENT); ++ ++ if (pfe_eth_gemac_phy_timeout( priv, EMAC_MDIO_TIMEOUT)) { ++ netdev_err(priv->dev, "%s: phy MDIO read timeout\n", __func__); ++ return -1; ++ } ++ ++ value = __raw_readl(priv->EMAC_baseaddr + EMAC_PHY_MANAGEMENT) & 0xFFFF; ++#endif ++ ++// netif_info(priv, hw, priv->dev, "%s %d %d %x\n", bus->id, mii_id, regnum, value); ++ ++ return value; ++} ++ ++#else ++/** pfe_eth_mdio_reset ++ */ ++int pfe_eth_mdio_reset(struct mii_bus *bus) ++{ ++ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ u32 phy_speed, pclk = 250000000; /*TODO this needs to be checked read from the correct source*/ ++ ++ netif_info(priv, hw, priv->dev, "%s\n", __func__); ++ ++ mutex_lock(&bus->mdio_lock); ++ ++ /* ++ * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed) ++ * ++ * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while ++ * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'. ++ */ ++ phy_speed = (DIV_ROUND_UP(pclk, 4000000) << EMAC_MII_SPEED_SHIFT); ++ phy_speed |= EMAC_HOLDTIME(0x5); ++ __raw_writel(phy_speed, priv->PHY_baseaddr + EMAC_MII_CTRL_REG); ++ ++ mutex_unlock(&bus->mdio_lock); ++ ++ return 0; ++} ++ ++/** pfe_eth_gemac_phy_timeout ++ * ++ */ ++static int pfe_eth_gemac_phy_timeout(struct pfe_eth_priv_s *priv, int timeout) ++{ ++ while(!(__raw_readl(priv->PHY_baseaddr + EMAC_IEVENT_REG) & EMAC_IEVENT_MII)) { ++ ++ if (timeout-- <= 0) { ++ return -1; ++ } ++ ++ udelay(10); ++ } ++ __raw_writel(EMAC_IEVENT_MII, priv->PHY_baseaddr + EMAC_IEVENT_REG); ++ ++ return 0; ++} ++ ++static int pfe_eth_mdio_mux(u8 muxval) ++{ ++ struct i2c_adapter *a; ++ struct i2c_msg msg; ++ unsigned char buf[2]; ++ int ret; ++ ++ a = i2c_get_adapter(0); ++ if (!a) ++ return -ENODEV; ++ ++ /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */ ++ buf[0] = 0x54; //reg number ++ buf[1] = (muxval << 6)| 0x3; //data ++ msg.addr = 0x66; ++ msg.buf = buf; ++ msg.len = 2; ++ msg.flags = 0; ++ ret = i2c_transfer(a, &msg, 1); ++ i2c_put_adapter(a); ++ if (ret != 1) ++ return -ENODEV; ++ return 0; ++ ++ ++} ++ ++static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) ++{ ++ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ ++ /*FIXME Dirty hack to configure mux */ ++ if(priv->mdio_muxval) { ++ if(mii_id == 0x1) ++ pfe_eth_mdio_mux(0x1); ++ else ++ pfe_eth_mdio_mux(0x2); ++ } ++ ++ /* start a write op */ ++ __raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR | ++ EMAC_MII_DATA_PA(mii_id) | EMAC_MII_DATA_RA(regnum) | ++ EMAC_MII_DATA_TA | EMAC_MII_DATA(value), ++ priv->PHY_baseaddr + EMAC_MII_DATA_REG); ++ ++ if (pfe_eth_gemac_phy_timeout(priv, EMAC_MDIO_TIMEOUT)){ ++ netdev_err(priv->dev, "%s: phy MDIO write timeout\n", __func__); ++ return -1; ++ } ++ netif_info(priv, hw, priv->dev, "%s: phy %x reg %x val %x\n", __func__, mii_id, regnum, value); ++ ++ return 0; ++ ++ ++} ++static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum) ++{ ++ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)bus->priv; ++ u16 value = 0; ++ ++ /*FIXME Dirty hack to configure mux */ ++ if(priv->mdio_muxval){ ++ if(mii_id == 0x1) ++ pfe_eth_mdio_mux(0x1); ++ else ++ pfe_eth_mdio_mux(0x2); ++ } ++ ++ /* start a read op */ ++ __raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD | ++ EMAC_MII_DATA_PA(mii_id) | EMAC_MII_DATA_RA(regnum) | ++ EMAC_MII_DATA_TA, priv->PHY_baseaddr + EMAC_MII_DATA_REG); ++ ++ if (pfe_eth_gemac_phy_timeout( priv, EMAC_MDIO_TIMEOUT)) { ++ netdev_err(priv->dev, "%s: phy MDIO read timeout\n", __func__); ++ return -1; ++ } ++ ++ value = EMAC_MII_DATA(__raw_readl(priv->PHY_baseaddr + EMAC_MII_DATA_REG)); ++ netif_info(priv, hw, priv->dev, "%s: phy %x reg %x val %x\n", __func__, mii_id, regnum, value); ++ return value; ++} ++#endif ++static int pfe_eth_mdio_init(struct pfe_eth_priv_s *priv, struct comcerto_mdio_platform_data *minfo) ++{ ++ struct mii_bus *bus; ++ int rc; ++ ++ netif_info(priv, drv, priv->dev, "%s\n", __func__); ++ printk( "%s\n", __func__); ++ ++#if !defined(CONFIG_PLATFORM_EMULATION) ++ bus = mdiobus_alloc(); ++ if (!bus) { ++ netdev_err(priv->dev, "mdiobus_alloc() failed\n"); ++ rc = -ENOMEM; ++ goto err0; ++ } ++ ++ bus->name = "Comcerto MDIO Bus"; ++ bus->read = &pfe_eth_mdio_read; ++ bus->write = &pfe_eth_mdio_write; ++ bus->reset = &pfe_eth_mdio_reset; ++ snprintf(bus->id, MII_BUS_ID_SIZE, "comcerto-%x", priv->id); ++ bus->priv = priv; ++ ++ bus->phy_mask = minfo->phy_mask; ++ priv->mdc_div = minfo->mdc_div; ++ ++ if (!priv->mdc_div) ++ priv->mdc_div = 64; ++ ++ bus->irq = minfo->irq; ++ ++ bus->parent = priv->pfe->dev; ++ ++ netif_info(priv, drv, priv->dev, "%s: mdc_div: %d, phy_mask: %x \n", __func__, priv->mdc_div, bus->phy_mask); ++ rc = mdiobus_register(bus); ++ if (rc) { ++ netdev_err(priv->dev, "mdiobus_register(%s) failed\n", bus->name); ++ goto err1; ++ } ++ ++ priv->mii_bus = bus; ++ pfe_eth_mdio_reset(bus); ++ ++ return 0; ++ ++err1: ++ mdiobus_free(bus); ++err0: ++ return rc; ++#else ++ return 0; ++#endif ++ ++} ++ ++/** pfe_eth_mdio_exit ++ */ ++static void pfe_eth_mdio_exit(struct mii_bus *bus) ++{ ++ if (!bus) ++ return; ++ ++ netif_info((struct pfe_eth_priv_s *)bus->priv, drv, ((struct pfe_eth_priv_s *)(bus->priv))->dev, "%s\n", __func__); ++ ++ mdiobus_unregister(bus); ++ mdiobus_free(bus); ++} ++ ++#if defined(CONFIG_PLATFORM_C2000) ++/** pfe_get_interface ++ */ ++static phy_interface_t pfe_get_interface(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ u32 mii_mode = priv->einfo->mii_config; ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ ++ if (priv->einfo->gemac_mode & (GEMAC_SW_CONF)) { ++ switch (mii_mode) { ++ case CONFIG_COMCERTO_USE_GMII: ++ return PHY_INTERFACE_MODE_GMII; ++ break; ++ case CONFIG_COMCERTO_USE_RGMII: ++ return PHY_INTERFACE_MODE_RGMII; ++ break; ++ case CONFIG_COMCERTO_USE_RMII: ++ return PHY_INTERFACE_MODE_RMII; ++ break; ++ case CONFIG_COMCERTO_USE_SGMII: ++ return PHY_INTERFACE_MODE_SGMII; ++ break; ++ ++ default : ++ case CONFIG_COMCERTO_USE_MII: ++ return PHY_INTERFACE_MODE_MII; ++ break; ++ ++ } ++ } else { ++ // Bootstrap config read from controller ++ BUG(); ++ return 0; ++ } ++} ++#endif ++ ++/** pfe_get_phydev_speed ++ */ ++static int pfe_get_phydev_speed(struct phy_device *phydev) ++{ ++ switch (phydev->speed) { ++ case 10: ++ return SPEED_10M; ++ case 100: ++ return SPEED_100M; ++ case 1000: ++ default: ++ return SPEED_1000M; ++ } ++ ++} ++ ++/** pfe_set_rgmii_speed ++ */ ++#define RGMIIPCR 0x434 ++/* RGMIIPCR bit definitions*/ ++#define SCFG_RGMIIPCR_EN_AUTO (0x00000008) ++#define SCFG_RGMIIPCR_SETSP_1000M (0x00000004) ++#define SCFG_RGMIIPCR_SETSP_100M (0x00000000) ++#define SCFG_RGMIIPCR_SETSP_10M (0x00000002) ++#define SCFG_RGMIIPCR_SETFD (0x00000001) ++ ++static void pfe_set_rgmii_speed(struct phy_device *phydev) ++{ ++ u32 rgmii_pcr; ++ ++ regmap_read(pfe->scfg, RGMIIPCR, &rgmii_pcr); ++ rgmii_pcr &= ~(SCFG_RGMIIPCR_SETSP_1000M|SCFG_RGMIIPCR_SETSP_10M); ++ ++ switch (phydev->speed) { ++ case 10: ++ rgmii_pcr |= SCFG_RGMIIPCR_SETSP_10M; ++ break; ++ case 1000: ++ rgmii_pcr |= SCFG_RGMIIPCR_SETSP_1000M; ++ break; ++ case 100: ++ default: ++ /* Default is 100M */ ++ break; ++ } ++ regmap_write(pfe->scfg, RGMIIPCR, rgmii_pcr); ++ ++ ++} ++/** pfe_get_phydev_duplex ++ */ ++static int pfe_get_phydev_duplex(struct phy_device *phydev) ++{ ++ //return ( phydev->duplex == DUPLEX_HALF ) ? DUP_HALF:DUP_FULL ; ++ return DUPLEX_FULL; ++} ++ ++/** pfe_eth_adjust_link ++ */ ++static void pfe_eth_adjust_link(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ unsigned long flags; ++ struct phy_device *phydev = priv->phydev; ++ int new_state = 0; ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ if (phydev->link) { ++ /* Now we make sure that we can be in full duplex mode. ++ * If not, we operate in half-duplex mode. */ ++ if (phydev->duplex != priv->oldduplex) { ++ new_state = 1; ++ gemac_set_duplex(priv->EMAC_baseaddr, pfe_get_phydev_duplex(phydev)); ++ priv->oldduplex = phydev->duplex; ++ } ++ ++ if (phydev->speed != priv->oldspeed) { ++ new_state = 1; ++ gemac_set_speed(priv->EMAC_baseaddr, pfe_get_phydev_speed(phydev)); ++ if(priv->einfo->mii_config == PHY_INTERFACE_MODE_RGMII) ++ pfe_set_rgmii_speed(phydev); ++ priv->oldspeed = phydev->speed; ++ } ++ ++ if (!priv->oldlink) { ++ new_state = 1; ++ priv->oldlink = 1; ++ } ++ ++ } else if (priv->oldlink) { ++ new_state = 1; ++ priv->oldlink = 0; ++ priv->oldspeed = 0; ++ priv->oldduplex = -1; ++ } ++ ++ if (new_state && netif_msg_link(priv)) ++ phy_print_status(phydev); ++ ++ spin_unlock_irqrestore(&priv->lock, flags); ++} ++ ++ ++/** pfe_phy_exit ++ */ ++static void pfe_phy_exit(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ ++ phy_disconnect(priv->phydev); ++ priv->phydev = NULL; ++} ++ ++/** pfe_eth_stop ++ */ ++static void pfe_eth_stop( struct net_device *dev , int wake) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ ++ if (wake) ++ gemac_tx_disable(priv->EMAC_baseaddr); ++ else { ++ gemac_disable(priv->EMAC_baseaddr); ++ gpi_disable(priv->GPI_baseaddr); ++ ++ if (priv->phydev) ++ phy_stop(priv->phydev); ++ } ++} ++ ++/** pfe_eth_start ++ */ ++static int pfe_eth_start( struct pfe_eth_priv_s *priv ) ++{ ++ netif_info(priv, drv, priv->dev, "%s\n", __func__); ++ ++ if (priv->phydev) ++ phy_start(priv->phydev); ++ ++ gpi_enable(priv->GPI_baseaddr); ++ gemac_enable(priv->EMAC_baseaddr); ++ ++ return 0; ++} ++ ++/*Configure on chip serdes through mdio ++ * Is there any better way to do this? */ ++static void ls1012a_configure_serdes(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = pfe->eth.eth_priv[0]; // FIXME This will not work for EMAC2 as SGMII ++ /*int value,sgmii_2500=0; */ ++ struct mii_bus *bus = priv->mii_bus; ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ /* PCS configuration done with corresponding GEMAC */ ++ ++ pfe_eth_mdio_read(bus, 0, 0); ++ pfe_eth_mdio_read(bus, 0, 1); ++#if 1 ++ /*These settings taken from validtion team */ ++ pfe_eth_mdio_write(bus, 0, 0x0, 0x8000); ++ pfe_eth_mdio_write(bus, 0, 0x14, 0xb); ++ pfe_eth_mdio_write(bus, 0, 0x4, 0x1a1); ++ pfe_eth_mdio_write(bus, 0, 0x12, 0x400); ++ pfe_eth_mdio_write(bus, 0, 0x13, 0x0); ++ pfe_eth_mdio_write(bus, 0, 0x0, 0x1140); ++ return; ++#else ++ /*Reset serdes */ ++ pfe_eth_mdio_write(bus, 0, 0x0, 0x8000); ++ ++ /* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */ ++ value = PHY_SGMII_IF_MODE_SGMII; ++ if (!sgmii_2500) ++ value |= PHY_SGMII_IF_MODE_AN; ++ ++ pfe_eth_mdio_write(bus, 0, 0x14, value); ++ ++ /* Dev ability according to SGMII specification */ ++ value = PHY_SGMII_DEV_ABILITY_SGMII; ++ pfe_eth_mdio_write(bus, 0, 0x4, value); ++ ++ //These values taken from validation team ++ pfe_eth_mdio_write(bus, 0, 0x13, 0x0); ++ pfe_eth_mdio_write(bus, 0, 0x12, 0x400); ++ ++ /* Restart AN */ ++ value = PHY_SGMII_CR_DEF_VAL; ++ if (!sgmii_2500) ++ value |= PHY_SGMII_CR_RESET_AN; ++ pfe_eth_mdio_write(bus, 0, 0, value); ++ ++#endif ++} ++ ++/** pfe_phy_init ++ * ++ */ ++static int pfe_phy_init(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ struct phy_device *phydev; ++ char phy_id[MII_BUS_ID_SIZE + 3]; ++ char bus_id[MII_BUS_ID_SIZE]; ++ phy_interface_t interface; ++ ++ priv->oldlink = 0; ++ priv->oldspeed = 0; ++ priv->oldduplex = -1; ++ ++ snprintf(bus_id, MII_BUS_ID_SIZE, "comcerto-%d", 0); ++ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, priv->einfo->phy_id); ++ ++ netif_info(priv, drv, dev, "%s: %s\n", __func__, phy_id); ++#if defined(CONFIG_PLATFORM_C2000) ++ interface = pfe_get_interface(dev); ++#else ++ interface = priv->einfo->mii_config; ++ if(interface == PHY_INTERFACE_MODE_SGMII) { ++ /*Configure SGMII PCS */ ++ if(pfe->scfg) { ++ /*Config MDIO from serdes */ ++ regmap_write(pfe->scfg, 0x484, 0x00000000); ++ } ++ ls1012a_configure_serdes(dev); ++ } ++ ++ if(pfe->scfg) { ++ /*Config MDIO from PAD */ ++ regmap_write(pfe->scfg, 0x484, 0x80000000); ++ } ++#endif ++ ++ ++ priv->oldlink = 0; ++ priv->oldspeed = 0; ++ priv->oldduplex = -1; ++ ++ printk("%s interface %x \n", __func__, interface); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,9,0) ++ phydev = phy_connect(dev, phy_id, &pfe_eth_adjust_link, interface); ++#else ++ phydev = phy_connect(dev, phy_id, &pfe_eth_adjust_link, 0, interface); ++#endif ++ ++ if (IS_ERR(phydev)) { ++ netdev_err(dev, "phy_connect() failed\n"); ++ return PTR_ERR(phydev); ++ } ++ ++ priv->phydev = phydev; ++ phydev->irq = PHY_POLL; ++ ++#if defined(CONFIG_PLATFORM_C2000) ++ /* Pause frame support */ ++ phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; ++ if (pfe_eth_pause_rx_enabled(priv)) ++ phydev->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause; ++ else ++ phydev->advertising &= ~(ADVERTISED_Pause | ADVERTISED_Asym_Pause); ++#else ++ /*TODO Add pause frame support for LS1012A */ ++#endif ++ ++ return 0; ++} ++ ++/** pfe_gemac_init ++ */ ++static int pfe_gemac_init(struct pfe_eth_priv_s *priv) ++{ ++ GEMAC_CFG cfg; ++ ++ netif_info(priv, ifup, priv->dev, "%s\n", __func__); ++ ++ /* software config */ ++ /* MII interface mode selection */ ++ switch (priv->einfo->mii_config) { ++ case CONFIG_COMCERTO_USE_GMII: ++ cfg.mode = GMII; ++ break; ++ ++ case CONFIG_COMCERTO_USE_MII: ++ cfg.mode = MII; ++ break; ++ ++ case CONFIG_COMCERTO_USE_RGMII: ++ cfg.mode = RGMII; ++ break; ++ ++ case CONFIG_COMCERTO_USE_RMII: ++ cfg.mode = RMII; ++ break; ++ ++ case CONFIG_COMCERTO_USE_SGMII: ++ cfg.mode = SGMII; ++ break; ++ ++ default: ++ cfg.mode = RGMII; ++ } ++ ++ /* Speed selection */ ++ switch (priv->einfo->gemac_mode & GEMAC_SW_SPEED_1G ) { ++ case GEMAC_SW_SPEED_1G: ++ cfg.speed = SPEED_1000M; ++ break; ++ ++ case GEMAC_SW_SPEED_100M: ++ cfg.speed = SPEED_100M; ++ break; ++ ++ case GEMAC_SW_SPEED_10M: ++ cfg.speed = SPEED_10M; ++ break; ++ ++ default: ++ cfg.speed = SPEED_1000M; ++ } ++ ++ /* Duplex selection */ ++ cfg.duplex = ( priv->einfo->gemac_mode & GEMAC_SW_FULL_DUPLEX ) ? DUPLEX_FULL : DUPLEX_HALF; ++ ++ gemac_set_config( priv->EMAC_baseaddr, &cfg); ++ gemac_allow_broadcast( priv->EMAC_baseaddr ); ++ gemac_disable_unicast( priv->EMAC_baseaddr ); ++ gemac_disable_multicast( priv->EMAC_baseaddr ); ++ gemac_disable_fcs_rx( priv->EMAC_baseaddr ); ++ gemac_enable_1536_rx( priv->EMAC_baseaddr ); ++ gemac_enable_rx_jmb( priv->EMAC_baseaddr ); ++ gemac_enable_stacked_vlan( priv->EMAC_baseaddr ); ++ gemac_enable_pause_rx( priv->EMAC_baseaddr ); ++ gemac_set_bus_width(priv->EMAC_baseaddr, 64); ++ /*TODO just for testing remove it later */ ++ gemac_enable_copy_all(priv->EMAC_baseaddr); ++ ++ /*GEM will perform checksum verifications*/ ++ if (priv->dev->features & NETIF_F_RXCSUM) ++ gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr); ++ else ++ gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr); ++ ++ return 0; ++} ++ ++/** pfe_eth_event_handler ++ */ ++static int pfe_eth_event_handler(void *data, int event, int qno) ++{ ++ struct pfe_eth_priv_s *priv = data; ++ ++ switch (event) { ++ case EVENT_RX_PKT_IND: ++ ++ if (qno == 0) { ++ if (napi_schedule_prep(&priv->high_napi)) { ++ netif_info(priv, intr, priv->dev, "%s: schedule high prio poll\n", __func__); ++ ++#ifdef PFE_ETH_NAPI_STATS ++ priv->napi_counters[NAPI_SCHED_COUNT]++; ++#endif ++ ++ __napi_schedule(&priv->high_napi); ++ } ++ } ++ else if (qno == 1) { ++ if (napi_schedule_prep(&priv->low_napi)) { ++ netif_info(priv, intr, priv->dev, "%s: schedule low prio poll\n", __func__); ++ ++#ifdef PFE_ETH_NAPI_STATS ++ priv->napi_counters[NAPI_SCHED_COUNT]++; ++#endif ++ __napi_schedule(&priv->low_napi); ++ } ++ } ++ else if (qno == 2) { ++ if (napi_schedule_prep(&priv->lro_napi)) { ++ netif_info(priv, intr, priv->dev, "%s: schedule lro prio poll\n", __func__); ++ ++#ifdef PFE_ETH_NAPI_STATS ++ priv->napi_counters[NAPI_SCHED_COUNT]++; ++#endif ++ __napi_schedule(&priv->lro_napi); ++ } ++ } ++ ++ break; ++ ++ case EVENT_TXDONE_IND: ++ case EVENT_HIGH_RX_WM: ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++/** pfe_eth_open ++ */ ++static int pfe_eth_open(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ struct hif_client_s *client; ++ int rc; ++ ++ netif_info(priv, ifup, dev, "%s\n", __func__); ++ ++ /* Register client driver with HIF */ ++ client = &priv->client; ++ memset(client, 0, sizeof(*client)); ++ client->id = PFE_CL_GEM0 + priv->id; ++ client->tx_qn = emac_txq_cnt; ++ client->rx_qn = EMAC_RXQ_CNT; ++ client->priv = priv; ++ client->pfe = priv->pfe; ++ client->event_handler = pfe_eth_event_handler; ++ ++ /* FIXME : For now hif lib sets all tx and rx queues to same size */ ++ client->tx_qsize = EMAC_TXQ_DEPTH; ++ client->rx_qsize = EMAC_RXQ_DEPTH; ++ ++ if ((rc = hif_lib_client_register(client))) { ++ netdev_err(dev, "%s: hif_lib_client_register(%d) failed\n", __func__, client->id); ++ goto err0; ++ } ++ ++ netif_info(priv, drv, dev, "%s: registered client: %p\n", __func__, client); ++ ++#if defined(CONFIG_PLATFORM_C2000) ++ /* Enable gemac tx clock */ ++ clk_enable(priv->gemtx_clk); ++#endif ++ ++ pfe_gemac_init(priv); ++ ++ if (!is_valid_ether_addr(dev->dev_addr)) { ++ netdev_err(dev, "%s: invalid MAC address\n", __func__); ++ rc = -EADDRNOTAVAIL; ++ goto err1; ++ } ++ ++ gemac_set_laddrN( priv->EMAC_baseaddr, ( MAC_ADDR *)dev->dev_addr, 1 ); ++ ++ napi_enable(&priv->high_napi); ++ napi_enable(&priv->low_napi); ++ napi_enable(&priv->lro_napi); ++ ++ rc = pfe_eth_start(priv); ++ ++ netif_tx_wake_all_queues(dev); ++ ++ //pfe_ctrl_set_eth_state(priv->id, 1, dev->dev_addr); ++ ++ priv->tx_timer.expires = jiffies + ( COMCERTO_TX_RECOVERY_TIMEOUT_MS * HZ )/1000; ++ add_timer(&priv->tx_timer); ++ ++ return rc; ++ ++err1: ++ hif_lib_client_unregister(&priv->client); ++#if defined(CONFIG_PLATFORM_C2000) ++ clk_disable(priv->gemtx_clk); ++#endif ++ ++err0: ++ return rc; ++} ++/* ++ * pfe_eth_shutdown ++ */ ++int pfe_eth_shutdown( struct net_device *dev, int wake) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int i, qstatus; ++ unsigned long next_poll = jiffies + 1, end = jiffies + (TX_POLL_TIMEOUT_MS * HZ) / 1000; ++ int tx_pkts, prv_tx_pkts; ++ ++ netif_info(priv, ifdown, dev, "%s\n", __func__); ++ ++ del_timer_sync(&priv->tx_timer); ++ ++ for(i = 0; i < emac_txq_cnt; i++) ++ hrtimer_cancel(&priv->fast_tx_timeout[i].timer); ++ ++ netif_tx_stop_all_queues(dev); ++ ++ do { ++ tx_pkts = 0; ++ pfe_eth_flush_tx(priv, 1); ++ ++ for (i = 0; i < emac_txq_cnt; i++) ++ tx_pkts += hif_lib_tx_pending(&priv->client, i); ++ ++ if (tx_pkts) { ++ /*Don't wait forever, break if we cross max timeout */ ++ if (time_after(jiffies, end)) { ++ printk(KERN_ERR "(%s)Tx is not complete after %dmsec\n", dev->name, TX_POLL_TIMEOUT_MS); ++ break; ++ } ++ ++ printk("%s : (%s) Waiting for tx packets to free. Pending tx pkts = %d.\n", __func__, dev->name, tx_pkts); ++ if (need_resched()) ++ schedule(); ++ } ++ ++ } while(tx_pkts); ++ ++ end = jiffies + (TX_POLL_TIMEOUT_MS * HZ) / 1000; ++ /*Disable transmit in PFE before disabling GEMAC */ ++ //pfe_ctrl_set_eth_state(priv->id, 0, NULL); ++ ++ prv_tx_pkts = tmu_pkts_processed(priv->id); ++ /*Wait till TMU transmits all pending packets ++ * poll tmu_qstatus and pkts processed by TMU for every 10ms ++ * Consider TMU is busy, If we see TMU qeueu pending or any packets processed by TMU ++ */ ++ while(1) { ++ ++ if (time_after(jiffies, next_poll)) { ++ ++ tx_pkts = tmu_pkts_processed(priv->id); ++ qstatus = tmu_qstatus(priv->id) & 0x7ffff; ++ ++ if(!qstatus && (tx_pkts == prv_tx_pkts)) { ++ break; ++ } ++ /*Don't wait forever, break if we cross max timeout(TX_POLL_TIMEOUT_MS) */ ++ if (time_after(jiffies, end)) { ++ printk(KERN_ERR "TMU%d is busy after %dmsec\n", priv->id, TX_POLL_TIMEOUT_MS); ++ break; ++ } ++ prv_tx_pkts = tx_pkts; ++ next_poll++; ++ } ++ if (need_resched()) ++ schedule(); ++ ++ ++ } ++ /* Wait for some more time to complete transmitting packet if any */ ++ next_poll = jiffies + 1; ++ while(1) { ++ if (time_after(jiffies, next_poll)) ++ break; ++ if (need_resched()) ++ schedule(); ++ } ++ ++ pfe_eth_stop(dev, wake); ++ ++ napi_disable(&priv->lro_napi); ++ napi_disable(&priv->low_napi); ++ napi_disable(&priv->high_napi); ++ ++#if defined(CONFIG_PLATFORM_C2000) ++ /* Disable gemac tx clock */ ++ clk_disable(priv->gemtx_clk); ++#endif ++ ++ hif_lib_client_unregister(&priv->client); ++ ++ return 0; ++} ++ ++/* pfe_eth_close ++ * ++ */ ++static int pfe_eth_close( struct net_device *dev ) ++{ ++ pfe_eth_shutdown(dev, 0); ++ ++ return 0; ++} ++ ++/* pfe_eth_suspend ++ * ++ * return value : 1 if netdevice is configured to wakeup system ++ * 0 otherwise ++ */ ++int pfe_eth_suspend(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int retval = 0; ++ ++ if (priv->wol) { ++ gemac_set_wol(priv->EMAC_baseaddr, priv->wol); ++ retval = 1; ++ } ++ pfe_eth_shutdown(dev, priv->wol); ++ ++ return retval; ++} ++ ++/** pfe_eth_resume ++ * ++ */ ++int pfe_eth_resume(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ if (priv->wol) ++ gemac_set_wol(priv->EMAC_baseaddr, 0); ++ ++ return pfe_eth_open(dev); ++} ++ ++#if defined(CONFIG_PLATFORM_C2000) ++/** pfe_eth_set_device_wakeup ++ * ++ * Called when a netdevice changes its wol status. ++ * Scans state of all interfaces and updae PFE device ++ * wakeable state ++ */ ++static void pfe_eth_set_device_wakeup(struct pfe *pfe) ++{ ++ int i; ++ int wake = 0; ++ ++ for(i = 0; i < NUM_GEMAC_SUPPORT; i++) ++ wake |= pfe->eth.eth_priv[i]->wol; ++ ++ device_set_wakeup_enable(pfe->dev, wake); ++ //TODO Find correct IRQ mapping. ++ //TODO interface with PMU ++ //int irq_set_irq_wake(unsigned int irq, unsigned int on) ++} ++#endif ++/** pfe_eth_get_queuenum ++ * ++ */ ++static int pfe_eth_get_queuenum( struct pfe_eth_priv_s *priv, struct sk_buff *skb ) ++{ ++ int queuenum = 0; ++ unsigned long flags; ++ ++ /* Get the Fast Path queue number */ ++ /* Use conntrack mark (if conntrack exists), then packet mark (if any), then fallback to default */ ++#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK) ++ if (skb->nfct) { ++ enum ip_conntrack_info cinfo; ++ struct nf_conn *ct; ++ ct = nf_ct_get(skb, &cinfo); ++ ++ if (ct) { ++ u_int32_t connmark; ++ connmark = ct->mark; ++ ++ if ((connmark & 0x80000000) && priv->id != 0) ++ connmark >>= 16; ++ ++ queuenum = connmark & EMAC_QUEUENUM_MASK; ++ } ++ } ++ else /* continued after #endif ... */ ++#endif ++ if (skb->mark) ++ queuenum = skb->mark & EMAC_QUEUENUM_MASK; ++ else { ++ spin_lock_irqsave(&priv->lock, flags); ++ queuenum = priv->default_priority & EMAC_QUEUENUM_MASK; ++ spin_unlock_irqrestore(&priv->lock, flags); ++ } ++ ++ return queuenum; ++} ++ ++ ++ ++/** pfe_eth_might_stop_tx ++ * ++ */ ++static int pfe_eth_might_stop_tx(struct pfe_eth_priv_s *priv, int queuenum, struct netdev_queue *tx_queue, unsigned int n_desc, unsigned int n_segs) ++{ ++ int tried = 0; ++ ktime_t kt; ++ ++try_again: ++ if (unlikely((__hif_tx_avail(&pfe->hif) < n_desc) ++ || (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) ++ || (hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < n_segs))) { ++ ++ if (!tried) { ++ hif_tx_unlock(&pfe->hif); ++ pfe_eth_flush_txQ(priv, queuenum, 1, n_desc); ++ hif_lib_update_credit(&priv->client, queuenum); ++ tried = 1; ++ hif_tx_lock(&pfe->hif); ++ goto try_again; ++ } ++#ifdef PFE_ETH_TX_STATS ++ if (__hif_tx_avail(&pfe->hif) < n_desc) ++ priv->stop_queue_hif[queuenum]++; ++ else if (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) { ++ priv->stop_queue_hif_client[queuenum]++; ++ } ++ else if (hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < n_segs) { ++ priv->stop_queue_credit[queuenum]++; ++ } ++ priv->stop_queue_total[queuenum]++; ++#endif ++ netif_tx_stop_queue(tx_queue); ++ ++ kt = ktime_set(0, COMCERTO_TX_FAST_RECOVERY_TIMEOUT_MS * NSEC_PER_MSEC); ++ hrtimer_start(&priv->fast_tx_timeout[queuenum].timer, kt, HRTIMER_MODE_REL); ++ return -1; ++ } ++ else { ++ return 0; ++ } ++} ++ ++#define SA_MAX_OP 2 ++/** pfe_hif_send_packet ++ * ++ * At this level if TX fails we drop the packet ++ */ ++static void pfe_hif_send_packet( struct sk_buff *skb, struct pfe_eth_priv_s *priv, int queuenum) ++{ ++ struct skb_shared_info *sh = skb_shinfo(skb); ++ unsigned int nr_frags; ++ u32 ctrl = 0; ++ ++ netif_info(priv, tx_queued, priv->dev, "%s\n", __func__); ++ ++ if (skb_is_gso(skb)) { ++ priv->stats.tx_dropped++; ++ return; ++ } ++ ++ if (skb->ip_summed == CHECKSUM_PARTIAL) { ++ if (skb->len > 1522) { ++ skb->ip_summed = 0; ++ ctrl = 0; ++ ++ if (pfe_compute_csum(skb)){ ++ kfree_skb(skb); ++ return; ++ } ++ } ++ else ++ ctrl = HIF_CTRL_TX_CHECKSUM; ++ } ++ ++ nr_frags = sh->nr_frags; ++ ++ if (nr_frags) { ++ skb_frag_t *f; ++ int i; ++ ++ __hif_lib_xmit_pkt(&priv->client, queuenum, skb->data, skb_headlen(skb), ctrl, HIF_FIRST_BUFFER, skb); ++ ++ for (i = 0; i < nr_frags - 1; i++) { ++ f = &sh->frags[i]; ++ __hif_lib_xmit_pkt(&priv->client, queuenum, skb_frag_address(f), skb_frag_size(f), 0x0, 0x0, skb); ++ } ++ ++ f = &sh->frags[i]; ++ ++ __hif_lib_xmit_pkt(&priv->client, queuenum, skb_frag_address(f), skb_frag_size(f), 0x0, HIF_LAST_BUFFER|HIF_DATA_VALID, skb); ++ ++ netif_info(priv, tx_queued, priv->dev, "%s: pkt sent successfully skb:%p nr_frags:%d len:%d\n", __func__, skb, nr_frags, skb->len); ++ } ++ else { ++ __hif_lib_xmit_pkt(&priv->client, queuenum, skb->data, skb->len, ctrl, HIF_FIRST_BUFFER | HIF_LAST_BUFFER | HIF_DATA_VALID, skb); ++ netif_info(priv, tx_queued, priv->dev, "%s: pkt sent successfully skb:%p len:%d\n", __func__, skb, skb->len); ++ } ++ hif_tx_dma_start(); ++ priv->stats.tx_packets++; ++ priv->stats.tx_bytes += skb->len; ++ hif_lib_tx_credit_use(pfe, priv->id, queuenum, 1); ++} ++ ++/** pfe_eth_flush_txQ ++ */ ++static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int txQ_num, int from_tx, int n_desc) ++{ ++ struct sk_buff *skb; ++ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->dev, txQ_num); ++ int count = max(TX_FREE_MAX_COUNT, n_desc); ++ unsigned int flags; ++ ++ netif_info(priv, tx_done, priv->dev, "%s\n", __func__); ++ ++ if (!from_tx) ++ __netif_tx_lock_bh(tx_queue); ++ ++ /* Clean HIF and client queue */ ++ while (count && (skb = hif_lib_tx_get_next_complete(&priv->client, txQ_num, &flags, count))) { ++ ++ /* FIXME : Invalid data can be skipped in hif_lib itself */ ++ if (flags & HIF_DATA_VALID) { ++ dev_kfree_skb_any(skb); ++ ++ } ++ // When called from the timer, flush all descriptors ++ if (from_tx) ++ count--; ++ } ++ ++ if (!from_tx) ++ __netif_tx_unlock_bh(tx_queue); ++} ++ ++/** pfe_eth_flush_tx ++ */ ++static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv, int force) ++{ ++ int ii; ++ ++ netif_info(priv, tx_done, priv->dev, "%s\n", __func__); ++ ++ for (ii = 0; ii < emac_txq_cnt; ii++) { ++ if (force || (time_after(jiffies, priv->client.tx_q[ii].jiffies_last_packet + (COMCERTO_TX_RECOVERY_TIMEOUT_MS * HZ)/1000))) { ++ pfe_eth_flush_txQ(priv, ii, 0, 0); //We will release everything we can based on from_tx param, so the count param can be set to any value ++ hif_lib_update_credit(&priv->client, ii); ++ } ++ } ++} ++ ++void pfe_tx_get_req_desc(struct sk_buff *skb, unsigned int *n_desc, unsigned int *n_segs) ++{ ++ struct skb_shared_info *sh = skb_shinfo(skb); ++ ++ // Scattered data ++ if (sh->nr_frags) { ++ *n_desc = sh->nr_frags + 1; ++ *n_segs = 1; ++ } ++ // Regular case ++ else { ++ *n_desc = 1; ++ *n_segs = 1; ++ } ++ return; ++} ++ ++/** pfe_eth_send_packet ++ */ ++static int pfe_eth_send_packet(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int txQ_num = skb_get_queue_mapping(skb); ++ int n_desc, n_segs, count; ++ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->dev, txQ_num); ++ ++ netif_info(priv, tx_queued, dev, "%s\n", __func__); ++ ++ if ((!skb_is_gso(skb)) && (skb_headroom(skb) < (PFE_PKT_HEADER_SZ + sizeof(unsigned long)))) { ++ ++ netif_warn(priv, tx_err, priv->dev, "%s: copying skb\n", __func__); ++ ++ if (pskb_expand_head(skb, (PFE_PKT_HEADER_SZ + sizeof(unsigned long)), 0, GFP_ATOMIC)) { ++ /* No need to re-transmit, no way to recover*/ ++ kfree_skb(skb); ++ priv->stats.tx_dropped++; ++ return NETDEV_TX_OK; ++ } ++ } ++ ++ pfe_tx_get_req_desc(skb, &n_desc, &n_segs); ++ ++ hif_tx_lock(&pfe->hif); ++ if(unlikely(pfe_eth_might_stop_tx(priv, txQ_num, tx_queue, n_desc, n_segs))) { ++#ifdef PFE_ETH_TX_STATS ++ if(priv->was_stopped[txQ_num]) { ++ priv->clean_fail[txQ_num]++; ++ priv->was_stopped[txQ_num] = 0; ++ } ++#endif ++ hif_tx_unlock(&pfe->hif); ++ return NETDEV_TX_BUSY; ++ } ++ ++ pfe_hif_send_packet(skb, priv, txQ_num); ++ ++ hif_tx_unlock(&pfe->hif); ++ ++ dev->trans_start = jiffies; ++ ++ // Recycle buffers if a socket's send buffer becomes half full or if the HIF client queue starts filling up ++ if (((count = (hif_lib_tx_pending(&priv->client, txQ_num) - HIF_CL_TX_FLUSH_MARK)) > 0) ++ || (skb->sk && ((sk_wmem_alloc_get(skb->sk) << 1) > skb->sk->sk_sndbuf))) ++ pfe_eth_flush_txQ(priv, txQ_num, 1, count); ++ ++#ifdef PFE_ETH_TX_STATS ++ priv->was_stopped[txQ_num] = 0; ++#endif ++ ++ return NETDEV_TX_OK; ++} ++ ++/** pfe_eth_select_queue ++ * ++ */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,14,0) ++static u16 pfe_eth_select_queue( struct net_device *dev, struct sk_buff *skb, ++ void *accel_priv, select_queue_fallback_t fallback) ++#else ++static u16 pfe_eth_select_queue( struct net_device *dev, struct sk_buff *skb ) ++#endif ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ return pfe_eth_get_queuenum(priv, skb); ++} ++ ++ ++/** pfe_eth_get_stats ++ */ ++static struct net_device_stats *pfe_eth_get_stats(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ ++ return &priv->stats; ++} ++ ++ ++/** pfe_eth_change_mtu ++ */ ++static int pfe_eth_change_mtu(struct net_device *dev, int new_mtu) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int oldsize = dev->mtu ; ++ int frame_size = new_mtu + ETH_HLEN +4; ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ ++ if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) { ++ netif_err(priv, drv, dev, "Invalid MTU setting\n"); ++ return -EINVAL; ++ } ++ ++ if ((new_mtu > 1500) && (dev->features & NETIF_F_TSO)) ++ { ++ priv->usr_features = dev->features; ++ if (dev->features & NETIF_F_TSO) ++ { ++ netdev_err(dev, "MTU cannot be set to more than 1500 while TSO is enabled. disabling TSO.\n"); ++ dev->features &= ~(NETIF_F_TSO); ++ } ++ } ++ else if ((dev->mtu > 1500) && (new_mtu <= 1500)) ++ { ++ if (priv->usr_features & NETIF_F_TSO) ++ { ++ priv->usr_features &= ~(NETIF_F_TSO); ++ dev->features |= NETIF_F_TSO; ++ netdev_err(dev, "MTU is <= 1500, Enabling TSO feature.\n"); ++ } ++ } ++ ++ /* Only stop and start the controller if it isn't already ++ * stopped, and we changed something */ ++ if ((oldsize != new_mtu) && (dev->flags & IFF_UP)){ ++ netdev_err(dev, "Can not change MTU - fast_path must be disabled and ifconfig down must be issued first\n"); ++ ++ return -EINVAL; ++ } ++ ++ dev->mtu = new_mtu; ++ ++ return 0; ++} ++ ++/** pfe_eth_set_mac_address ++ */ ++static int pfe_eth_set_mac_address(struct net_device *dev, void *addr) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ struct sockaddr *sa = addr; ++ ++ netif_info(priv, drv, dev, "%s\n", __func__); ++ ++ if (!is_valid_ether_addr(sa->sa_data)) ++ return -EADDRNOTAVAIL; ++ ++ memcpy(dev->dev_addr, sa->sa_data, ETH_ALEN); ++ ++ gemac_set_laddrN(priv->EMAC_baseaddr, (MAC_ADDR *)dev->dev_addr, 1); ++ ++ return 0; ++ ++} ++ ++/** pfe_eth_enet_addr_byte_mac ++ */ ++int pfe_eth_enet_addr_byte_mac(u8 * enet_byte_addr, MAC_ADDR *enet_addr) ++{ ++ if ((enet_byte_addr == NULL) || (enet_addr == NULL)) ++ { ++ return -1; ++ } ++ else ++ { ++ enet_addr->bottom = enet_byte_addr[0] | ++ (enet_byte_addr[1] << 8) | ++ (enet_byte_addr[2] << 16) | ++ (enet_byte_addr[3] << 24); ++ enet_addr->top = enet_byte_addr[4] | ++ (enet_byte_addr[5] << 8); ++ return 0; ++ } ++} ++ ++ ++ ++/** pfe_eth_set_multi ++ */ ++static void pfe_eth_set_multi(struct net_device *dev) ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ MAC_ADDR hash_addr; /* hash register structure */ ++ MAC_ADDR spec_addr; /* specific mac address register structure */ ++ int result; /* index into hash register to set.. */ ++ int uc_count = 0; ++ struct netdev_hw_addr *ha; ++ ++ if (dev->flags & IFF_PROMISC) { ++ netif_info(priv, drv, dev, "entering promiscuous mode\n"); ++ ++ priv->promisc = 1; ++ gemac_enable_copy_all(priv->EMAC_baseaddr); ++ } else { ++ priv->promisc = 0; ++ gemac_disable_copy_all(priv->EMAC_baseaddr); ++ } ++ ++ /* Enable broadcast frame reception if required. */ ++ if (dev->flags & IFF_BROADCAST) { ++ gemac_allow_broadcast(priv->EMAC_baseaddr); ++ } else { ++ netif_info(priv, drv, dev, "disabling broadcast frame reception\n"); ++ ++ gemac_no_broadcast(priv->EMAC_baseaddr); ++ } ++ ++ if (dev->flags & IFF_ALLMULTI) { ++ /* Set the hash to rx all multicast frames */ ++ hash_addr.bottom = 0xFFFFFFFF; ++ hash_addr.top = 0xFFFFFFFF; ++ gemac_set_hash(priv->EMAC_baseaddr, &hash_addr); ++ gemac_enable_multicast(priv->EMAC_baseaddr); ++ netdev_for_each_uc_addr(ha, dev) { ++ if(uc_count >= MAX_UC_SPEC_ADDR_REG) break; ++ pfe_eth_enet_addr_byte_mac(ha->addr, &spec_addr); ++ gemac_set_laddrN(priv->EMAC_baseaddr, &spec_addr, uc_count + 2); ++ uc_count++; ++ } ++ } else if ((netdev_mc_count(dev) > 0) || (netdev_uc_count(dev))) { ++ u8 *addr; ++ ++ hash_addr.bottom = 0; ++ hash_addr.top = 0; ++ ++ netdev_for_each_mc_addr(ha, dev) { ++ addr = ha->addr; ++ ++ netif_info(priv, drv, dev, "adding multicast address %X:%X:%X:%X:%X:%X to gem filter\n", ++ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); ++ ++ result = pfe_eth_get_hash(addr); ++ ++ if (result >= EMAC_HASH_REG_BITS) { ++ break; ++ } else { ++ if (result < 32) { ++ hash_addr.bottom |= (1 << result); ++ } else { ++ hash_addr.top |= (1 << (result - 32)); ++ } ++ } ++ ++ } ++ ++ uc_count = -1; ++ netdev_for_each_uc_addr(ha, dev) { ++ addr = ha->addr; ++ ++ if(++uc_count < MAX_UC_SPEC_ADDR_REG) ++ { ++ netdev_info(dev, "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem filter\n", ++ addr[0], addr[1], addr[2], ++ addr[3], addr[4], addr[5]); ++ ++ pfe_eth_enet_addr_byte_mac(addr, &spec_addr); ++ gemac_set_laddrN(priv->EMAC_baseaddr, &spec_addr, uc_count + 2); ++ } ++ else ++ { ++ netif_info(priv, drv, dev, "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem hash\n", ++ addr[0], addr[1], addr[2], ++ addr[3], addr[4], addr[5]); ++ ++ result = pfe_eth_get_hash(addr); ++ if (result >= EMAC_HASH_REG_BITS) { ++ break; ++ } else { ++ if (result < 32) ++ hash_addr.bottom |= (1 << result); ++ else ++ hash_addr.top |= (1 << (result - 32)); ++ } ++ ++ ++ } ++ } ++ ++ gemac_set_hash(priv->EMAC_baseaddr, &hash_addr); ++ if(netdev_mc_count(dev)) ++ gemac_enable_multicast(priv->EMAC_baseaddr); ++ else ++ gemac_disable_multicast(priv->EMAC_baseaddr); ++ } ++ ++ if(netdev_uc_count(dev) >= MAX_UC_SPEC_ADDR_REG) ++ gemac_enable_unicast(priv->EMAC_baseaddr); ++ else ++ { ++ /* Check if there are any specific address HW registers that need ++ * to be flushed ++ * */ ++ for(uc_count = netdev_uc_count(dev); uc_count < MAX_UC_SPEC_ADDR_REG; uc_count++) ++ gemac_clear_laddrN(priv->EMAC_baseaddr, uc_count + 2); ++ ++ gemac_disable_unicast(priv->EMAC_baseaddr); ++ } ++ ++ if (dev->flags & IFF_LOOPBACK) { ++ gemac_set_loop(priv->EMAC_baseaddr, LB_LOCAL); ++ } ++ ++ return; ++} ++ ++/** pfe_eth_set_features ++ */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0) ++static int pfe_eth_set_features(struct net_device *dev, netdev_features_t features) ++#else ++static int pfe_eth_set_features(struct net_device *dev, u32 features) ++#endif ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ int rc = 0; ++ ++ if (features & NETIF_F_RXCSUM) ++ gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr); ++ else ++ gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr); ++ return rc; ++} ++ ++/** pfe_eth_fix_features ++ */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,6,0) ++static netdev_features_t pfe_eth_fix_features(struct net_device *dev, netdev_features_t features) ++#else ++static unsigned int pfe_eth_fix_features(struct net_device *dev,u32 features) ++#endif ++{ ++ struct pfe_eth_priv_s *priv = netdev_priv(dev); ++ ++ if (dev->mtu > 1500) ++ { ++ if (features & (NETIF_F_TSO)) ++ { ++ priv->usr_features |= NETIF_F_TSO; ++ features &= ~(NETIF_F_TSO); ++ netdev_err(dev, "TSO cannot be enabled when the MTU is larger than 1500. Please set the MTU to 1500 or lower first.\n"); ++ } ++ } ++ ++ return features; ++} ++ ++/** pfe_eth_tx_timeout ++ */ ++void pfe_eth_tx_timeout(unsigned long data ) ++{ ++ struct pfe_eth_priv_s *priv = (struct pfe_eth_priv_s *)data; ++ ++ netif_info(priv, timer, priv->dev, "%s\n", __func__); ++ ++ pfe_eth_flush_tx(priv, 0); ++ ++ priv->tx_timer.expires = jiffies + ( COMCERTO_TX_RECOVERY_TIMEOUT_MS * HZ )/1000; ++ add_timer(&priv->tx_timer); ++} ++ ++/** pfe_eth_fast_tx_timeout ++ */ ++static enum hrtimer_restart pfe_eth_fast_tx_timeout(struct hrtimer *timer) ++{ ++ struct pfe_eth_fast_timer *fast_tx_timeout = container_of(timer, struct pfe_eth_fast_timer, timer); ++ struct pfe_eth_priv_s *priv = container_of(fast_tx_timeout->base, struct pfe_eth_priv_s, fast_tx_timeout); ++ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->dev, fast_tx_timeout->queuenum); ++ ++ if(netif_tx_queue_stopped(tx_queue)) { ++#ifdef PFE_ETH_TX_STATS ++ priv->was_stopped[fast_tx_timeout->queuenum] = 1; ++#endif ++ netif_tx_wake_queue(tx_queue); ++ } ++ ++ return HRTIMER_NORESTART; ++} ++ ++/** pfe_eth_fast_tx_timeout_init ++ */ ++static void pfe_eth_fast_tx_timeout_init(struct pfe_eth_priv_s *priv) ++{ ++ int i; ++ for (i = 0; i < emac_txq_cnt; i++) { ++ priv->fast_tx_timeout[i].queuenum = i; ++ hrtimer_init(&priv->fast_tx_timeout[i].timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); ++ priv->fast_tx_timeout[i].timer.function = pfe_eth_fast_tx_timeout; ++ priv->fast_tx_timeout[i].base = priv->fast_tx_timeout; ++ } ++} ++ ++static struct sk_buff *pfe_eth_rx_skb(struct net_device *dev, struct pfe_eth_priv_s *priv, unsigned int qno) ++{ ++ void *buf_addr; ++ unsigned int rx_ctrl; ++ unsigned int desc_ctrl = 0; ++ struct hif_ipsec_hdr *ipsec_hdr = NULL; ++ struct sk_buff *skb; ++ struct sk_buff *skb_frag, *skb_frag_last = NULL; ++ int length = 0, offset; ++ ++ skb = priv->skb_inflight[qno]; ++ ++ if (skb && (skb_frag_last = skb_shinfo(skb)->frag_list)) { ++ while (skb_frag_last->next) ++ skb_frag_last = skb_frag_last->next; ++ } ++ ++ while (!(desc_ctrl & CL_DESC_LAST)) { ++ ++ buf_addr = hif_lib_receive_pkt(&priv->client, qno, &length, &offset, &rx_ctrl, &desc_ctrl, (void **)&ipsec_hdr); ++ if (!buf_addr) ++ goto incomplete; ++ ++#ifdef PFE_ETH_NAPI_STATS ++ priv->napi_counters[NAPI_DESC_COUNT]++; ++#endif ++ ++ /* First frag */ ++ if (desc_ctrl & CL_DESC_FIRST) { ++#if defined(CONFIG_PLATFORM_EMULATION) || defined(CONFIG_PLATFORM_PCI) ++ skb = dev_alloc_skb(PFE_BUF_SIZE); ++ if (unlikely(!skb)) { ++ goto pkt_drop; ++ } ++ ++ skb_copy_to_linear_data(skb, buf_addr, length + offset); ++ kfree(buf_addr); ++#else ++#if defined(CONFIG_COMCERTO_ZONE_DMA_NCNB) ++ skb = alloc_skb(length + offset + 32, GFP_ATOMIC); ++#else ++ skb = alloc_skb_header(PFE_BUF_SIZE, buf_addr, GFP_ATOMIC); ++#endif ++ if (unlikely(!skb)) { ++ goto pkt_drop; ++ } ++#endif ++ skb_reserve(skb, offset); ++#if defined(CONFIG_COMCERTO_ZONE_DMA_NCNB) ++ __memcpy(skb->data, buf_addr + offset, length); ++ if (ipsec_hdr) { ++ sah_local = *(unsigned int *)&ipsec_hdr->sa_handle[0]; ++ } ++ kfree(buf_addr); ++#endif ++ skb_put(skb, length); ++ skb->dev = dev; ++ ++ if ((dev->features & NETIF_F_RXCSUM) && (rx_ctrl & HIF_CTRL_RX_CHECKSUMMED)) ++ skb->ip_summed = CHECKSUM_UNNECESSARY; ++ else ++ skb_checksum_none_assert(skb); ++ ++ } else { ++ ++ /* Next frags */ ++ if (unlikely(!skb)) { ++ printk(KERN_ERR "%s: NULL skb_inflight\n", __func__); ++ goto pkt_drop; ++ } ++ ++#if defined(CONFIG_COMCERTO_ZONE_DMA_NCNB) ++ skb_frag = alloc_skb(length + offset + 32, GFP_ATOMIC); ++#else ++ skb_frag = alloc_skb_header(PFE_BUF_SIZE, buf_addr, GFP_ATOMIC); ++#endif ++ if (unlikely(!skb_frag)) { ++ kfree(buf_addr); ++ goto pkt_drop; ++ } ++ ++ skb_reserve(skb_frag, offset); ++#if defined(CONFIG_COMCERTO_ZONE_DMA_NCNB) ++ __memcpy(skb_frag->data, buf_addr + offset, length); ++ kfree(buf_addr); ++#endif ++ skb_put(skb_frag, length); ++ ++ skb_frag->dev = dev; ++ ++ if (skb_shinfo(skb)->frag_list) ++ skb_frag_last->next = skb_frag; ++ else ++ skb_shinfo(skb)->frag_list = skb_frag; ++ ++ skb->truesize += skb_frag->truesize; ++ skb->data_len += length; ++ skb->len += length; ++ skb_frag_last = skb_frag; ++ } ++ } ++ ++ priv->skb_inflight[qno] = NULL; ++ return skb; ++ ++incomplete: ++ priv->skb_inflight[qno] = skb; ++ return NULL; ++ ++pkt_drop: ++ priv->skb_inflight[qno] = NULL; ++ ++ if (skb) { ++ kfree_skb(skb); ++ } else { ++ kfree(buf_addr); ++ } ++ ++ priv->stats.rx_errors++; ++ ++ return NULL; ++} ++ ++ ++/** pfe_eth_poll ++ */ ++static int pfe_eth_poll(struct pfe_eth_priv_s *priv, struct napi_struct *napi, unsigned int qno, int budget) ++{ ++ struct net_device *dev = priv->dev; ++ struct sk_buff *skb; ++ int work_done = 0; ++ unsigned int len; ++ ++ netif_info(priv, intr, priv->dev, "%s\n", __func__); ++ ++#ifdef PFE_ETH_NAPI_STATS ++ priv->napi_counters[NAPI_POLL_COUNT]++; ++#endif ++ ++ do { ++ skb = pfe_eth_rx_skb(dev, priv, qno); ++ ++ if (!skb) ++ break; ++ ++ len = skb->len; ++ ++ /* Packet will be processed */ ++ skb->protocol = eth_type_trans(skb, dev); ++ ++ netif_receive_skb(skb); ++ ++ priv->stats.rx_packets++; ++ priv->stats.rx_bytes += len; ++ ++ dev->last_rx = jiffies; ++ ++ work_done++; ++ ++#ifdef PFE_ETH_NAPI_STATS ++ priv->napi_counters[NAPI_PACKET_COUNT]++; ++#endif ++ ++ } while (work_done < budget); ++ ++ /* If no Rx receive nor cleanup work was done, exit polling mode. ++ * No more netif_running(dev) check is required here , as this is checked in ++ * net/core/dev.c ( 2.6.33.5 kernel specific). ++ */ ++ if (work_done < budget) { ++ napi_complete(napi); ++ ++ hif_lib_event_handler_start(&priv->client, EVENT_RX_PKT_IND, qno); ++ } ++#ifdef PFE_ETH_NAPI_STATS ++ else ++ priv->napi_counters[NAPI_FULL_BUDGET_COUNT]++; ++#endif ++ ++ return work_done; ++} ++ ++/** pfe_eth_lro_poll ++ */ ++static int pfe_eth_lro_poll(struct napi_struct *napi, int budget) ++{ ++ struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s, lro_napi); ++ ++ netif_info(priv, intr, priv->dev, "%s\n", __func__); ++ ++ return pfe_eth_poll(priv, napi, 2, budget); ++} ++ ++ ++/** pfe_eth_low_poll ++ */ ++static int pfe_eth_low_poll(struct napi_struct *napi, int budget) ++{ ++ struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s, low_napi); ++ ++ netif_info(priv, intr, priv->dev, "%s\n", __func__); ++ ++ return pfe_eth_poll(priv, napi, 1, budget); ++} ++ ++/** pfe_eth_high_poll ++ */ ++static int pfe_eth_high_poll(struct napi_struct *napi, int budget ) ++{ ++ struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s, high_napi); ++ ++ netif_info(priv, intr, priv->dev, "%s\n", __func__); ++ ++ return pfe_eth_poll(priv, napi, 0, budget); ++} ++ ++static const struct net_device_ops pfe_netdev_ops = { ++ .ndo_open = pfe_eth_open, ++ .ndo_stop = pfe_eth_close, ++ .ndo_start_xmit = pfe_eth_send_packet, ++ .ndo_select_queue = pfe_eth_select_queue, ++ .ndo_get_stats = pfe_eth_get_stats, ++ .ndo_change_mtu = pfe_eth_change_mtu, ++ .ndo_set_mac_address = pfe_eth_set_mac_address, ++ .ndo_set_rx_mode = pfe_eth_set_multi, ++ .ndo_set_features = pfe_eth_set_features, ++ .ndo_fix_features = pfe_eth_fix_features, ++ .ndo_validate_addr = eth_validate_addr, ++}; ++ ++ ++/** pfe_eth_init_one ++ */ ++ ++static int pfe_eth_init_one( struct pfe *pfe, int id ) ++{ ++ struct net_device *dev = NULL; ++ struct pfe_eth_priv_s *priv = NULL; ++ struct comcerto_eth_platform_data *einfo; ++ struct comcerto_mdio_platform_data *minfo; ++ struct comcerto_pfe_platform_data *pfe_info; ++ int err; ++ ++ /* Extract pltform data */ ++#if defined(CONFIG_PLATFORM_EMULATION) || defined(CONFIG_PLATFORM_PCI) ++ pfe_info = (struct comcerto_pfe_platform_data *) &comcerto_pfe_pdata; ++#else ++ pfe_info = (struct comcerto_pfe_platform_data *) pfe->dev->platform_data; ++#endif ++ if (!pfe_info) { ++ printk(KERN_ERR "%s: pfe missing additional platform data\n", __func__); ++ err = -ENODEV; ++ goto err0; ++ } ++ ++ einfo = (struct comcerto_eth_platform_data *) pfe_info->comcerto_eth_pdata; ++ ++ /* einfo never be NULL, but no harm in having this check */ ++ if (!einfo) { ++ printk(KERN_ERR "%s: pfe missing additional gemacs platform data\n", __func__); ++ err = -ENODEV; ++ goto err0; ++ } ++ ++ minfo = (struct comcerto_mdio_platform_data *) pfe_info->comcerto_mdio_pdata; ++ ++ /* einfo never be NULL, but no harm in having this check */ ++ if (!minfo) { ++ printk(KERN_ERR "%s: pfe missing additional mdios platform data\n", __func__); ++ err = -ENODEV; ++ goto err0; ++ } ++ ++ /* ++ * FIXME: Need to check some flag in "einfo" to know whether ++ * GEMAC is enabled Or not. ++ */ ++ ++ /* Create an ethernet device instance */ ++ dev = alloc_etherdev_mq(sizeof (*priv), emac_txq_cnt); ++ ++ if (!dev) { ++ printk(KERN_ERR "%s: gemac %d device allocation failed\n", __func__, einfo[id].gem_id); ++ err = -ENOMEM; ++ goto err0; ++ } ++ ++ priv = netdev_priv(dev); ++ priv->dev = dev; ++ priv->id = einfo[id].gem_id; ++ priv->pfe = pfe; ++ ++#if defined(CONFIG_PLATFORM_C2000) ++ /* get gemac tx clock */ ++ priv->gemtx_clk = clk_get(NULL, "gemtx"); ++ ++ if (IS_ERR(priv->gemtx_clk)) { ++ printk(KERN_ERR "%s: Unable to get the clock for gemac %d\n", __func__, priv->id); ++ err = -ENODEV; ++ goto err1; ++ } ++#endif ++ ++ pfe->eth.eth_priv[id] = priv; ++ ++ /* Set the info in the priv to the current info */ ++ priv->einfo = &einfo[id]; ++ priv->EMAC_baseaddr = cbus_emac_base[id]; ++ priv->PHY_baseaddr = cbus_emac_base[0]; ++ priv->mdio_muxval = einfo[id].mdio_muxval; ++ priv->GPI_baseaddr = cbus_gpi_base[id]; ++ ++ /* FIXME : For now TMU queue numbers hardcoded, later should be taken from pfe.h */ ++#define HIF_GEMAC_TMUQ_BASE 6 ++ priv->low_tmuQ = HIF_GEMAC_TMUQ_BASE + (id * 2); ++ priv->high_tmuQ = priv->low_tmuQ + 1; ++ ++ spin_lock_init(&priv->lock); ++ priv->tx_timer.data = (unsigned long)priv; ++ priv->tx_timer.function = pfe_eth_tx_timeout; ++ priv->tx_timer.expires = jiffies + ( COMCERTO_TX_RECOVERY_TIMEOUT_MS * HZ )/1000; ++ init_timer(&priv->tx_timer); ++ ++ pfe_eth_fast_tx_timeout_init(priv); ++ ++ /* Copy the station address into the dev structure, */ ++ memcpy(dev->dev_addr, einfo[id].mac_addr, ETH_ALEN); ++ ++ /* Initialize mdio */ ++ if (minfo[id].enabled) { ++ if ((err = pfe_eth_mdio_init(priv, &minfo[id]))) { ++ netdev_err(dev, "%s: pfe_eth_mdio_init() failed\n", __func__); ++ goto err2; ++ } ++ } ++ ++ dev->mtu = 1500; ++ ++ /* supported features */ ++ dev->hw_features = NETIF_F_SG; ++ /* Enable after checksum offload is validated ++ dev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | ++ NETIF_F_SG; */ ++ ++ /* enabled by default */ ++ dev->features = dev->hw_features; ++ ++ priv->usr_features = dev->features; ++ ++ dev->netdev_ops = &pfe_netdev_ops; ++ ++ dev->ethtool_ops = &pfe_ethtool_ops; ++ ++ /* Enable basic messages by default */ ++ priv->msg_enable = NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK | NETIF_MSG_PROBE; ++ ++ netif_napi_add(dev, &priv->low_napi, pfe_eth_low_poll, HIF_RX_POLL_WEIGHT - 16); ++ netif_napi_add(dev, &priv->high_napi, pfe_eth_high_poll, HIF_RX_POLL_WEIGHT - 16); ++ netif_napi_add(dev, &priv->lro_napi, pfe_eth_lro_poll, HIF_RX_POLL_WEIGHT - 16); ++ ++ err = register_netdev(dev); ++ ++ if (err) { ++ netdev_err(dev, "register_netdev() failed\n"); ++ goto err3; ++ } ++ ++ if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) { ++ err = pfe_phy_init(dev); ++ if (err) { ++ netdev_err(dev, "%s: pfe_phy_init() failed\n", __func__); ++ goto err4; ++ } ++ } ++ ++ ++ /* Create all the sysfs files */ ++ if(pfe_eth_sysfs_init(dev)) ++ goto err4; ++ ++ netif_info(priv, probe, dev, "%s: created interface, baseaddr: %p\n", __func__, priv->EMAC_baseaddr); ++ ++ return 0; ++err4: ++ unregister_netdev(dev); ++err3: ++ pfe_eth_mdio_exit(priv->mii_bus); ++err2: ++#if defined(CONFIG_PLATFORM_C2000) ++ clk_put(priv->gemtx_clk); ++err1: ++#endif ++ free_netdev(priv->dev); ++ ++err0: ++ return err; ++} ++ ++/** pfe_eth_init ++ */ ++int pfe_eth_init(struct pfe *pfe) ++{ ++ int ii = 0; ++ int err; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ cbus_emac_base[0] = EMAC1_BASE_ADDR; ++ cbus_emac_base[1] = EMAC2_BASE_ADDR; ++ ++ cbus_gpi_base[0] = EGPI1_BASE_ADDR; ++ cbus_gpi_base[1] = EGPI2_BASE_ADDR; ++ ++#if !defined(CONFIG_PLATFORM_LS1012A) ++ cbus_emac_base[2] = EMAC3_BASE_ADDR; ++ cbus_gpi_base[2] = EGPI3_BASE_ADDR; ++#endif ++ ++ for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) { ++ if ((err = pfe_eth_init_one(pfe, ii))) ++ goto err0; ++ } ++ ++ return 0; ++ ++err0: ++ while(ii--){ ++ pfe_eth_exit_one( pfe->eth.eth_priv[ii] ); ++ } ++ ++ /* Register three network devices in the kernel */ ++ return err; ++} ++ ++/** pfe_eth_exit_one ++ */ ++static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv) ++{ ++ netif_info(priv, probe, priv->dev, "%s\n", __func__); ++ ++ pfe_eth_sysfs_exit(priv->dev); ++ ++#if defined(CONFIG_PLATFORM_C2000) ++ clk_put(priv->gemtx_clk); ++#endif ++ ++ unregister_netdev(priv->dev); ++ ++ pfe_eth_mdio_exit(priv->mii_bus); ++ ++ if (!(priv->einfo->phy_flags & GEMAC_NO_PHY)) ++ pfe_phy_exit(priv->dev); ++ ++ free_netdev(priv->dev); ++} ++ ++/** pfe_eth_exit ++ */ ++void pfe_eth_exit(struct pfe *pfe) ++{ ++ int ii; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ for(ii = 0; ii < NUM_GEMAC_SUPPORT; ii++ ) { ++ /* ++ * FIXME: Need to check some flag in "einfo" to know whether ++ * GEMAC is enabled Or not. ++ */ ++ ++ pfe_eth_exit_one(pfe->eth.eth_priv[ii]); ++ } ++} ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_eth.h +@@ -0,0 +1,384 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_ETH_H_ ++#define _PFE_ETH_H_ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define PFE_ETH_NAPI_STATS ++#define PFE_ETH_TX_STATS ++ ++#define PFE_ETH_FRAGS_MAX (65536/HIF_RX_PKT_MIN_SIZE) ++#define LRO_LEN_COUNT_MAX 32 ++#define LRO_NB_COUNT_MAX 32 ++ ++#if defined(CONFIG_PLATFORM_PCI) || defined(CONFIG_PLATFORM_EMULATION) || defined(CONFIG_PLATFORM_LS1012A) ++ ++#define CONFIG_COMCERTO_GEMAC 1 ++ ++#define CONFIG_COMCERTO_USE_MII 1 ++#define CONFIG_COMCERTO_USE_RMII 2 ++#define CONFIG_COMCERTO_USE_GMII 4 ++#define CONFIG_COMCERTO_USE_RGMII 8 ++#define CONFIG_COMCERTO_USE_SGMII 16 ++ ++#define GEMAC_SW_CONF (1 << 8) | (1 << 11) // GEMAC configured by SW ++#define GEMAC_PHY_CONF 0 // GEMAC configured by phy lines (not for MII/GMII) ++#define GEMAC_SW_FULL_DUPLEX (1 << 9) ++#define GEMAC_SW_SPEED_10M (0 << 12) ++#define GEMAC_SW_SPEED_100M (1 << 12) ++#define GEMAC_SW_SPEED_1G (2 << 12) ++ ++#define GEMAC_NO_PHY (1 << 0) // set if no phy connected to MAC (ex ethernet switch). In this case use MAC fixed configuration ++#define GEMAC_PHY_RGMII_ADD_DELAY (1 << 1) ++ ++/* gemac to interface name assignment */ ++#define GEMAC0_ITF_NAME "eth5" ++#define GEMAC1_ITF_NAME "eth6" ++#define GEMAC2_ITF_NAME "eth7" ++ ++#define GEMAC0_MAC { 0x00, 0xED, 0xCD, 0xEF, 0xAA, 0xCC } ++#define GEMAC1_MAC { 0x00, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E } ++ ++struct comcerto_eth_platform_data { ++ /* device specific information */ ++ u32 device_flags; ++ char name[16]; ++ ++ ++ /* board specific information */ ++ u32 mii_config; ++ u32 gemac_mode; ++ u32 phy_flags; ++ u32 gem_id; ++ u32 bus_id; ++ u32 phy_id; ++ u32 mdio_muxval; ++ u8 mac_addr[ETH_ALEN]; ++}; ++ ++struct comcerto_mdio_platform_data { ++ int enabled; ++ int irq[32]; ++ u32 phy_mask; ++ int mdc_div; ++}; ++ ++struct comcerto_pfe_platform_data ++{ ++ struct comcerto_eth_platform_data comcerto_eth_pdata[3]; ++ struct comcerto_mdio_platform_data comcerto_mdio_pdata[3]; ++}; ++#if !defined(CONFIG_PLATFORM_LS1012A) ++static struct comcerto_pfe_platform_data comcerto_pfe_pdata = { ++ .comcerto_eth_pdata[0] = { ++ .name = GEMAC0_ITF_NAME, ++ .device_flags = CONFIG_COMCERTO_GEMAC, ++ .mii_config = CONFIG_COMCERTO_USE_MII, ++ .gemac_mode = GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_100M, ++#if defined(CONFIG_PLATFORM_EMULATION) || defined(CONFIG_PLATFORM_PCI) ++ .phy_flags = GEMAC_NO_PHY, ++#else ++ .phy_flags = GEMAC_PHY_RGMII_ADD_DELAY, ++#endif ++ .bus_id = 0, ++ .phy_id = 0, ++ .gem_id = 0, ++ .mac_addr = (u8[])GEMAC0_MAC, ++ }, ++ ++ .comcerto_eth_pdata[1] = { ++ .name = GEMAC1_ITF_NAME, ++ .device_flags = CONFIG_COMCERTO_GEMAC, ++ .mii_config = CONFIG_COMCERTO_USE_RGMII, ++ .gemac_mode = GEMAC_SW_CONF | GEMAC_SW_FULL_DUPLEX | GEMAC_SW_SPEED_1G, ++ .phy_flags = GEMAC_NO_PHY, ++ .gem_id = 1, ++ .mac_addr = (u8[])GEMAC1_MAC, ++ }, ++ ++ .comcerto_eth_pdata[2] = { ++ .name = GEMAC2_ITF_NAME, ++ }, ++ ++ .comcerto_mdio_pdata[0] = { ++ .enabled = 1, ++ .phy_mask = 0xFFFFFFFE, ++ .mdc_div = 96, ++ .irq = { ++ [0] = PHY_POLL, ++ }, ++ }, ++}; ++#endif ++#endif ++ ++#if defined(CONFIG_PLATFORM_LS1012A) ++#define NUM_GEMAC_SUPPORT 2 ++#define DRV_NAME "ls1012a-geth" ++#else ++#define NUM_GEMAC_SUPPORT 3 ++#define DRV_NAME "c2000-geth" ++#endif ++#define COMCERTO_INFOSTR_LEN 32 ++#define COMCERTO_TX_RECOVERY_TIMEOUT_MS 500 ++#define COMCERTO_TX_FAST_RECOVERY_TIMEOUT_MS 3 ++#define TX_POLL_TIMEOUT_MS 1000 ++ ++#define EMAC_TXQ_CNT 16 ++#define EMAC_TXQ_DEPTH (HIF_TX_DESC_NT) ++ ++#define JUMBO_FRAME_SIZE 10258 ++/** ++ * Client Tx queue threshold, for txQ flush condition. ++ * It must be smaller than the queue size (in case we ever change it in the future). ++ */ ++#define HIF_CL_TX_FLUSH_MARK 32 ++ ++/** ++ * Max number of TX resources (HIF descriptors or skbs) that will be released ++ * in a single go during batch recycling. ++ * Should be lower than the flush mark so the SW can provide the HW with a ++ * continuous stream of packets instead of bursts. ++ */ ++#define TX_FREE_MAX_COUNT 16 ++#define EMAC_RXQ_CNT 3 ++#define EMAC_RXQ_DEPTH HIF_RX_DESC_NT /* make sure clients can receive a full burst of packets */ ++#define EMAC_RMON_TXBYTES_POS 0x00 ++#define EMAC_RMON_RXBYTES_POS 0x14 ++ ++#define EMAC_QUEUENUM_MASK (emac_txq_cnt - 1) ++#define EMAC_MDIO_TIMEOUT 1000 ++#define MAX_UC_SPEC_ADDR_REG 31 ++ ++ ++/* The set of statistics registers implemented in the Cadence MAC. ++ * The statistics registers implemented are a subset of all the statistics ++ * available, but contains all the compulsory ones. ++ * For full descriptions on the registers, refer to the Cadence MAC programmers ++ * guide or the IEEE 802.3 specifications. ++ */ ++struct gemac_stats{ ++ u32 octets_tx_bot; /* Lower 32-bits for number of octets tx'd */ ++ u32 octets_tx_top; /* Upper 16-bits for number of octets tx'd */ ++ u32 frames_tx; /* Number of frames transmitted OK */ ++ u32 broadcast_tx; /* Number of broadcast frames transmitted */ ++ u32 multicast_tx; /* Number of multicast frames transmitted */ ++ u32 pause_tx; /* Number of pause frames transmitted. */ ++ u32 frame64_tx; /* Number of 64byte frames transmitted */ ++ u32 frame65_127_tx; /* Number of 65-127 byte frames transmitted */ ++ u32 frame128_255_tx; /* Number of 128-255 byte frames transmitted */ ++ u32 frame256_511_tx; /* Number of 256-511 byte frames transmitted */ ++ u32 frame512_1023_tx; /* Number of 512-1023 byte frames transmitted */ ++ u32 frame1024_1518_tx; /* Number of 1024-1518 byte frames transmitted*/ ++ u32 frame1519_tx; /* Number of frames greater than 1518 bytes tx*/ ++ u32 tx_urun; /* Transmit underrun errors due to DMA */ ++ u32 single_col; /* Number of single collision frames */ ++ u32 multi_col; /* Number of multi collision frames */ ++ u32 excess_col; /* Number of excessive collision frames. */ ++ u32 late_col; /* Collisions occuring after slot time */ ++ u32 def_tx; /* Frames deferred due to crs */ ++ u32 crs_errors; /* Errors caused by crs not being asserted. */ ++ u32 octets_rx_bot; /* Lower 32-bits for number of octets rx'd */ ++ u32 octets_rx_top; /* Upper 16-bits for number of octets rx'd */ ++ u32 frames_rx; /* Number of frames received OK */ ++ u32 broadcast_rx; /* Number of broadcast frames received */ ++ u32 multicast_rx; /* Number of multicast frames received */ ++ u32 pause_rx; /* Number of pause frames received. */ ++ u32 frame64_rx; /* Number of 64byte frames received */ ++ u32 frame65_127_rx; /* Number of 65-127 byte frames received */ ++ u32 frame128_255_rx; /* Number of 128-255 byte frames received */ ++ u32 frame256_511_rx; /* Number of 256-511 byte frames received */ ++ u32 frame512_1023_rx; /* Number of 512-1023 byte frames received */ ++ u32 frame1024_1518_rx; /* Number of 1024-1518 byte frames received*/ ++ u32 frame1519_rx; /* Number of frames greater than 1518 bytes rx*/ ++ u32 usize_frames; /* Frames received less than min of 64 bytes */ ++ u32 excess_length; /* Number of excessive length frames rx */ ++ u32 jabbers; /* Excessive length + crc or align errors. */ ++ u32 fcs_errors; /* Number of frames received with crc errors */ ++ u32 length_check_errors;/* Number of frames with incorrect length */ ++ u32 rx_symbol_errors; /* Number of times rx_er asserted during rx */ ++ u32 align_errors; /* Frames received without integer no. bytes */ ++ u32 rx_res_errors; /* Number of times buffers ran out during rx */ ++ u32 rx_orun; /* Receive overrun errors due to DMA */ ++ u32 ip_cksum; /* IP header checksum errors */ ++ u32 tcp_cksum; /* TCP checksum errors */ ++ u32 udp_cksum; /* UDP checksum errors */ ++}; ++ ++#define EMAC_REG_SPACE sizeof(struct gemac_reg) ++#define EMAC_RMON_LEN (sizeof(struct gemac_stats)/sizeof(u32)) ++ ++ ++struct pfe_eth_fast_timer { ++ int queuenum; ++ struct hrtimer timer; ++ void * base; ++}; ++ ++typedef struct pfe_eth_priv_s ++{ ++ struct pfe *pfe; ++ struct hif_client_s client; ++ struct napi_struct lro_napi; ++ struct napi_struct low_napi; ++ struct napi_struct high_napi; ++ int low_tmuQ; ++ int high_tmuQ; ++ struct net_device_stats stats; ++ struct net_device *dev; ++ int id; ++ int promisc; ++ unsigned int msg_enable; ++ unsigned int usr_features; ++ ++ spinlock_t lock; ++ unsigned int event_status; ++ int irq; ++ void* EMAC_baseaddr; ++ void* PHY_baseaddr; /* This points to the EMAC base from where we access PHY */ ++ void* GPI_baseaddr; ++ int mdio_muxval; ++ /* PHY stuff */ ++ struct phy_device *phydev; ++ int oldspeed; ++ int oldduplex; ++ int oldlink; ++ /* mdio info */ ++ int mdc_div; ++ struct mii_bus *mii_bus; ++ struct clk *gemtx_clk; ++ int wol; ++ ++ int default_priority; ++ struct timer_list tx_timer; ++ struct pfe_eth_fast_timer fast_tx_timeout[EMAC_TXQ_CNT]; ++ ++ struct comcerto_eth_platform_data *einfo; ++ struct sk_buff *skb_inflight[EMAC_RXQ_CNT + 6]; ++ ++#ifdef PFE_ETH_LRO_STATS ++ unsigned int lro_len_counters[LRO_LEN_COUNT_MAX]; ++ unsigned int lro_nb_counters[LRO_NB_COUNT_MAX]; //TODO change to exact max number when RX scatter done ++#endif ++ ++ ++#ifdef PFE_ETH_TX_STATS ++ unsigned int stop_queue_total[EMAC_TXQ_CNT]; ++ unsigned int stop_queue_hif[EMAC_TXQ_CNT]; ++ unsigned int stop_queue_hif_client[EMAC_TXQ_CNT]; ++ unsigned int stop_queue_credit[EMAC_TXQ_CNT]; ++ unsigned int clean_fail[EMAC_TXQ_CNT]; ++ unsigned int was_stopped[EMAC_TXQ_CNT]; ++#endif ++ ++#ifdef PFE_ETH_NAPI_STATS ++ unsigned int napi_counters[NAPI_MAX_COUNT]; ++#endif ++ unsigned int frags_inflight[EMAC_RXQ_CNT + 6]; ++ ++}pfe_eth_priv_t; ++ ++struct pfe_eth { ++ struct pfe_eth_priv_s *eth_priv[3]; ++}; ++ ++int pfe_eth_init(struct pfe *pfe); ++void pfe_eth_exit(struct pfe *pfe); ++int pfe_eth_suspend(struct net_device *dev); ++int pfe_eth_resume(struct net_device *dev); ++int pfe_eth_mdio_reset(struct mii_bus *bus); ++ ++/** pfe_compute_csum ++ * ++ */ ++static int inline pfe_compute_csum(struct sk_buff *skb) ++{ ++ struct skb_shared_info *sh; ++ unsigned int nr_frags; ++ skb_frag_t *f; ++ u32 csum = 0; ++ int i; ++ int len; ++ ++ /* Make sure that no intermediate buffers/fragments are odd byte aligned */ ++ if (skb_is_nonlinear(skb)) { ++ int linearize = 0; ++ ++ sh = skb_shinfo(skb); ++ nr_frags = sh->nr_frags; ++ len = skb_headlen(skb) - skb_transport_offset(skb); ++ ++ if (len & 0x1) { ++ linearize = 1; ++ //printk("#1 Odd length %d\n", len); ++ } ++ else { ++ for (i = 0; i < nr_frags - 1; i++) { ++ f = &sh->frags[i]; ++ len = skb_frag_size(f); ++ ++ if (len & 0x1) { ++ linearize = 1; ++ //printk("#2 %d Odd length %d\n", i, len); ++ break; ++ } ++ } ++ } ++ ++ if (linearize) ++ if (skb_linearize(skb)) ++ return -1; ++ } ++ ++ /* Compute checksum */ ++ if (!skb_is_nonlinear(skb)) { ++ *(u16*)(skb_transport_header(skb) + skb->csum_offset) = csum_fold(csum_partial(skb_transport_header(skb), skb->len - skb_transport_offset(skb), 0)); ++ } ++ else { ++ sh = skb_shinfo(skb); ++ nr_frags = sh->nr_frags; ++ ++ if (nr_frags) { ++ csum = csum_partial(skb_transport_header(skb), skb_headlen(skb) - skb_transport_offset(skb), 0); ++ ++ for (i = 0; i < nr_frags - 1; i++) { ++ f = &sh->frags[i]; ++ csum = csum_partial(skb_frag_address(f), skb_frag_size(f), csum); ++ } ++ ++ f = &sh->frags[i]; ++ *(u16*)(skb_transport_header(skb) + skb->csum_offset) = csum_fold(csum_partial(skb_frag_address(f), skb_frag_size(f), csum)); ++ } ++ } ++ ++ return 0; ++} ++ ++ ++ ++#endif /* _PFE_ETH_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_firmware.c +@@ -0,0 +1,322 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/** @file ++ * Contains all the functions to handle parsing and loading of PE firmware files. ++ */ ++#include ++ ++#include "pfe_mod.h" ++#include "pfe_firmware.h" ++#include "pfe/pfe.h" ++ ++static Elf32_Shdr * get_elf_section_header(const struct firmware *fw, const char *section) ++{ ++ Elf32_Ehdr *elf_hdr = (Elf32_Ehdr *)fw->data; ++ Elf32_Shdr *shdr, *shdr_shstr; ++ Elf32_Off e_shoff = be32_to_cpu(elf_hdr->e_shoff); ++ Elf32_Half e_shentsize = be16_to_cpu(elf_hdr->e_shentsize); ++ Elf32_Half e_shnum = be16_to_cpu(elf_hdr->e_shnum); ++ Elf32_Half e_shstrndx = be16_to_cpu(elf_hdr->e_shstrndx); ++ Elf32_Off shstr_offset; ++ Elf32_Word sh_name; ++ const char *name; ++ int i; ++ ++ /* Section header strings */ ++ shdr_shstr = (Elf32_Shdr *)(fw->data + e_shoff + e_shstrndx * e_shentsize); ++ shstr_offset = be32_to_cpu(shdr_shstr->sh_offset); ++ ++ for (i = 0; i < e_shnum; i++) { ++ shdr = (Elf32_Shdr *)(fw->data + e_shoff + i * e_shentsize); ++ ++ sh_name = be32_to_cpu(shdr->sh_name); ++ ++ name = (const char *)(fw->data + shstr_offset + sh_name); ++ ++ if (!strcmp(name, section)) ++ return shdr; ++ } ++ ++ printk(KERN_ERR "%s: didn't find section %s\n", __func__, section); ++ ++ return NULL; ++} ++ ++static unsigned long get_elf_section(const struct firmware *fw, const char *section) ++{ ++ Elf32_Shdr *shdr = get_elf_section_header(fw, section); ++ ++ if (shdr) ++ return be32_to_cpu(shdr->sh_addr); ++ else ++ return -1; ++} ++ ++#if defined(CFG_DIAGS) ++static int pfe_get_diags_info(const struct firmware *fw, struct pfe_diags_info *diags_info) ++{ ++ Elf32_Shdr *shdr; ++ unsigned long offset, size; ++ ++ shdr = get_elf_section_header(fw, ".pfe_diags_str"); ++ if (shdr) ++ { ++ offset = be32_to_cpu(shdr->sh_offset); ++ size = be32_to_cpu(shdr->sh_size); ++ diags_info->diags_str_base = be32_to_cpu(shdr->sh_addr); ++ diags_info->diags_str_size = size; ++ diags_info->diags_str_array = pfe_kmalloc(size, GFP_KERNEL); ++ memcpy(diags_info->diags_str_array, fw->data+offset, size); ++ ++ return 0; ++ } else ++ { ++ return -1; ++ } ++} ++#endif ++ ++static void pfe_check_version_info(const struct firmware *fw) ++{ ++ static char *version = NULL; ++ ++ Elf32_Shdr *shdr = get_elf_section_header(fw, ".version"); ++ ++ if (shdr) ++ { ++ if(!version) ++ { ++ /* this is the first fw we load, use its version string as reference (whatever it is) */ ++ version = (char *)(fw->data + be32_to_cpu(shdr->sh_offset)); ++ ++ printk(KERN_INFO "PFE binary version: %s\n", version); ++ } ++ else ++ { ++ /* already have loaded at least one firmware, check sequence can start now */ ++ if(strcmp(version, (char *)(fw->data + be32_to_cpu(shdr->sh_offset)))) ++ { ++ printk(KERN_INFO "WARNING: PFE firmware binaries from incompatible version\n"); ++ } ++ } ++ } ++ else ++ { ++ /* version cannot be verified, a potential issue that should be reported */ ++ printk(KERN_INFO "WARNING: PFE firmware binaries from incompatible version\n"); ++ } ++} ++ ++/** PFE elf firmware loader. ++* Loads an elf firmware image into a list of PE's (specified using a bitmask) ++* ++* @param pe_mask Mask of PE id's to load firmware to ++* @param fw Pointer to the firmware image ++* ++* @return 0 on sucess, a negative value on error ++* ++*/ ++int pfe_load_elf(int pe_mask, const struct firmware *fw, struct pfe *pfe) ++{ ++ Elf32_Ehdr *elf_hdr = (Elf32_Ehdr *)fw->data; ++ Elf32_Half sections = be16_to_cpu(elf_hdr->e_shnum); ++ Elf32_Shdr *shdr = (Elf32_Shdr *) (fw->data + be32_to_cpu(elf_hdr->e_shoff)); ++ int id, section; ++ int rc; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ /* Some sanity checks */ ++ if (strncmp(&elf_hdr->e_ident[EI_MAG0], ELFMAG, SELFMAG)) ++ { ++ printk(KERN_ERR "%s: incorrect elf magic number\n", __func__); ++ return -EINVAL; ++ } ++ ++ if (elf_hdr->e_ident[EI_CLASS] != ELFCLASS32) ++ { ++ printk(KERN_ERR "%s: incorrect elf class(%x)\n", __func__, elf_hdr->e_ident[EI_CLASS]); ++ return -EINVAL; ++ } ++ ++ if (elf_hdr->e_ident[EI_DATA] != ELFDATA2MSB) ++ { ++ printk(KERN_ERR "%s: incorrect elf data(%x)\n", __func__, elf_hdr->e_ident[EI_DATA]); ++ return -EINVAL; ++ } ++ ++ if (be16_to_cpu(elf_hdr->e_type) != ET_EXEC) ++ { ++ printk(KERN_ERR "%s: incorrect elf file type(%x)\n", __func__, be16_to_cpu(elf_hdr->e_type)); ++ return -EINVAL; ++ } ++ ++ for (section = 0; section < sections; section++, shdr++) ++ { ++ if (!(be32_to_cpu(shdr->sh_flags) & (SHF_WRITE | SHF_ALLOC | SHF_EXECINSTR))) ++ continue; ++ ++ for (id = 0; id < MAX_PE; id++) ++ if (pe_mask & (1 << id)) ++ { ++ rc = pe_load_elf_section(id, fw->data, shdr, pfe->dev); ++ if (rc < 0) ++ goto err; ++ } ++ } ++ ++ pfe_check_version_info(fw); ++ ++ return 0; ++ ++err: ++ return rc; ++} ++ ++ ++/** PFE firmware initialization. ++* Loads different firmware files from filesystem. ++* Initializes PE IMEM/DMEM and UTIL-PE DDR ++* Initializes control path symbol addresses (by looking them up in the elf firmware files ++* Takes PE's out of reset ++* ++* @return 0 on sucess, a negative value on error ++* ++*/ ++int pfe_firmware_init(struct pfe *pfe) ++{ ++ const struct firmware *class_fw, *tmu_fw; ++ int rc = 0; ++#if !defined(CONFIG_UTIL_DISABLED) ++ const char* util_fw_name; ++ const struct firmware *util_fw; ++#endif ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ if (request_firmware(&class_fw, CLASS_FIRMWARE_FILENAME, pfe->dev)) { ++ printk(KERN_ERR "%s: request firmware %s failed\n", __func__, CLASS_FIRMWARE_FILENAME); ++ rc = -ETIMEDOUT; ++ goto err0; ++ } ++ ++ if (request_firmware(&tmu_fw, TMU_FIRMWARE_FILENAME, pfe->dev)) { ++ printk(KERN_ERR "%s: request firmware %s failed\n", __func__, TMU_FIRMWARE_FILENAME); ++ rc = -ETIMEDOUT; ++ goto err1; ++ } ++#if !defined(CONFIG_UTIL_DISABLED) ++#if defined(CONFIG_PLATFORM_C2000) ++ util_fw_name = (system_rev == 0) ? UTIL_REVA0_FIRMWARE_FILENAME : UTIL_FIRMWARE_FILENAME; ++#else ++ util_fw_name = UTIL_FIRMWARE_FILENAME; ++#endif ++ ++ if (request_firmware(&util_fw, util_fw_name, pfe->dev)) { ++ printk(KERN_ERR "%s: request firmware %s failed\n", __func__, util_fw_name); ++ rc = -ETIMEDOUT; ++ goto err2; ++ } ++#endif ++ rc = pfe_load_elf(CLASS_MASK, class_fw, pfe); ++ if (rc < 0) { ++ printk(KERN_ERR "%s: class firmware load failed\n", __func__); ++ goto err3; ++ } ++ ++ pfe->ctrl.class_dmem_sh = get_elf_section(class_fw, ".dmem_sh"); ++ pfe->ctrl.class_pe_lmem_sh = get_elf_section(class_fw, ".pe_lmem_sh"); ++ ++#if defined(CFG_DIAGS) ++ rc = pfe_get_diags_info(class_fw, &pfe->diags.class_diags_info); ++ if (rc < 0) { ++ printk (KERN_WARNING "PFE diags won't be available for class PEs\n"); ++ rc = 0; ++ } ++#endif ++ ++ printk(KERN_INFO "%s: class firmware loaded %#lx %#lx\n", __func__, pfe->ctrl.class_dmem_sh, pfe->ctrl.class_pe_lmem_sh); ++ ++ rc = pfe_load_elf(TMU_MASK, tmu_fw, pfe); ++ if (rc < 0) { ++ printk(KERN_ERR "%s: tmu firmware load failed\n", __func__); ++ goto err3; ++ } ++ ++ pfe->ctrl.tmu_dmem_sh = get_elf_section(tmu_fw, ".dmem_sh"); ++ ++ printk(KERN_INFO "%s: tmu firmware loaded %#lx\n", __func__, pfe->ctrl.tmu_dmem_sh); ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ rc = pfe_load_elf(UTIL_MASK, util_fw, pfe); ++ if (rc < 0) { ++ printk(KERN_ERR "%s: util firmware load failed\n", __func__); ++ goto err3; ++ } ++ ++ pfe->ctrl.util_dmem_sh = get_elf_section(util_fw, ".dmem_sh"); ++ pfe->ctrl.util_ddr_sh = get_elf_section(util_fw, ".ddr_sh"); ++ ++#if defined(CFG_DIAGS) ++ rc = pfe_get_diags_info(util_fw, &pfe->diags.util_diags_info); ++ if (rc < 0) { ++ printk(KERN_WARNING "PFE diags won't be available for util PE\n"); ++ rc = 0; ++ } ++#endif ++ ++ printk(KERN_INFO "%s: util firmware loaded %#lx\n", __func__, pfe->ctrl.util_dmem_sh); ++ ++ util_enable(); ++#endif ++ ++ tmu_enable(0xf); ++ class_enable(); ++ ++err3: ++#if !defined(CONFIG_UTIL_DISABLED) ++ release_firmware(util_fw); ++ ++err2: ++#endif ++ release_firmware(tmu_fw); ++ ++err1: ++ release_firmware(class_fw); ++ ++err0: ++ return rc; ++} ++ ++/** PFE firmware cleanup ++* Puts PE's in reset ++* ++* ++*/ ++void pfe_firmware_exit(struct pfe *pfe) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ class_disable(); ++ tmu_disable(0xf); ++#if !defined(CONFIG_UTIL_DISABLED) ++ util_disable(); ++#endif ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_firmware.h +@@ -0,0 +1,41 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_FIRMWARE_H_ ++#define _PFE_FIRMWARE_H_ ++ ++#if defined(CONFIG_PLATFORM_C2000) ++#define CLASS_FIRMWARE_FILENAME "class_c2000.elf" ++#define TMU_FIRMWARE_FILENAME "tmu_c2000.elf" ++#define UTIL_FIRMWARE_FILENAME "util_c2000.elf" ++#define UTIL_REVA0_FIRMWARE_FILENAME "util_c2000_revA0.elf" ++#else ++#define CLASS_FIRMWARE_FILENAME "ppfe_class_ls1012a.elf" ++#define TMU_FIRMWARE_FILENAME "ppfe_tmu_ls1012a.elf" ++#endif ++ ++#define PFE_FW_CHECK_PASS 0 ++#define PFE_FW_CHECK_FAIL 1 ++#define NUM_PFE_FW 3 ++ ++int pfe_firmware_init(struct pfe *pfe); ++void pfe_firmware_exit(struct pfe *pfe); ++ ++#endif /* _PFE_FIRMWARE_H_ */ ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_hal.c +@@ -0,0 +1,2217 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++ ++#include "pfe_ctrl_hal.h" ++#include "pfe/pfe.h" ++ ++void *cbus_base_addr; ++void *ddr_base_addr; ++unsigned long ddr_phys_base_addr; ++unsigned int ddr_size; ++ ++static struct pe_info pe[MAX_PE]; ++ ++/** Initializes the PFE library. ++* Must be called before using any of the library functions. ++* ++* @param[in] cbus_base CBUS virtual base address (as mapped in the host CPU address space) ++* @param[in] ddr_base PFE DDR range virtual base address (as mapped in the host CPU address space) ++* @param[in] ddr_phys_base PFE DDR range physical base address (as mapped in platform) ++* @param[in] size PFE DDR range size (as defined by the host software) ++*/ ++void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base, unsigned int size) ++{ ++ cbus_base_addr = cbus_base; ++ ddr_base_addr = ddr_base; ++ ddr_phys_base_addr = ddr_phys_base; ++ ddr_size = size; ++ ++ pe[CLASS0_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(0); ++ pe[CLASS0_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(0); ++ pe[CLASS0_ID].pmem_size = CLASS_IMEM_SIZE; ++ pe[CLASS0_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; ++ pe[CLASS0_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; ++ pe[CLASS0_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; ++ ++ pe[CLASS1_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(1); ++ pe[CLASS1_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(1); ++ pe[CLASS1_ID].pmem_size = CLASS_IMEM_SIZE; ++ pe[CLASS1_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; ++ pe[CLASS1_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; ++ pe[CLASS1_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; ++ ++ pe[CLASS2_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(2); ++ pe[CLASS2_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(2); ++ pe[CLASS2_ID].pmem_size = CLASS_IMEM_SIZE; ++ pe[CLASS2_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; ++ pe[CLASS2_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; ++ pe[CLASS2_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; ++ ++ pe[CLASS3_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(3); ++ pe[CLASS3_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(3); ++ pe[CLASS3_ID].pmem_size = CLASS_IMEM_SIZE; ++ pe[CLASS3_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; ++ pe[CLASS3_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; ++ pe[CLASS3_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; ++ ++#if !defined(CONFIG_PLATFORM_PCI) ++ pe[CLASS4_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(4); ++ pe[CLASS4_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(4); ++ pe[CLASS4_ID].pmem_size = CLASS_IMEM_SIZE; ++ pe[CLASS4_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; ++ pe[CLASS4_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; ++ pe[CLASS4_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; ++ ++ pe[CLASS5_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(5); ++ pe[CLASS5_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(5); ++ pe[CLASS5_ID].pmem_size = CLASS_IMEM_SIZE; ++ pe[CLASS5_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; ++ pe[CLASS5_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; ++ pe[CLASS5_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; ++#endif ++ pe[TMU0_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(0); ++ pe[TMU0_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(0); ++ pe[TMU0_ID].pmem_size = TMU_IMEM_SIZE; ++ pe[TMU0_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA; ++ pe[TMU0_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR; ++ pe[TMU0_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA; ++ ++#if !defined(CONFIG_TMU_DUMMY) ++ pe[TMU1_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(1); ++ pe[TMU1_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(1); ++ pe[TMU1_ID].pmem_size = TMU_IMEM_SIZE; ++ pe[TMU1_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA; ++ pe[TMU1_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR; ++ pe[TMU1_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA; ++ ++#if !defined(CONFIG_PLATFORM_LS1012A) ++ pe[TMU2_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(2); ++ pe[TMU2_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(2); ++ pe[TMU2_ID].pmem_size = TMU_IMEM_SIZE; ++ pe[TMU2_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA; ++ pe[TMU2_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR; ++ pe[TMU2_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA; ++#endif ++ ++ pe[TMU3_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(3); ++ pe[TMU3_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(3); ++ pe[TMU3_ID].pmem_size = TMU_IMEM_SIZE; ++ pe[TMU3_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA; ++ pe[TMU3_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR; ++ pe[TMU3_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA; ++#endif ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ pe[UTIL_ID].dmem_base_addr = UTIL_DMEM_BASE_ADDR; ++ pe[UTIL_ID].mem_access_wdata = UTIL_MEM_ACCESS_WDATA; ++ pe[UTIL_ID].mem_access_addr = UTIL_MEM_ACCESS_ADDR; ++ pe[UTIL_ID].mem_access_rdata = UTIL_MEM_ACCESS_RDATA; ++#endif ++} ++ ++ ++/** Writes a buffer to PE internal memory from the host ++ * through indirect access registers. ++ * ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID) ++ * @param[in] src Buffer source address ++ * @param[in] mem_access_addr DMEM destination address (must be 32bit aligned) ++ * @param[in] len Number of bytes to copy ++ */ ++void pe_mem_memcpy_to32(int id, u32 mem_access_addr, const void *src, unsigned int len) ++{ ++ u32 offset = 0, val, addr; ++ unsigned int len32 = len >> 2; ++ int i; ++ ++ addr = mem_access_addr | PE_MEM_ACCESS_WRITE | PE_MEM_ACCESS_BYTE_ENABLE(0, 4); ++ ++ for (i = 0; i < len32; i++, offset += 4, src += 4) { ++ val = *(u32 *)src; ++ writel(cpu_to_be32(val), pe[id].mem_access_wdata); ++ writel(addr + offset, pe[id].mem_access_addr); ++ } ++ ++ if ((len = (len & 0x3))) { ++ val = 0; ++ ++ addr = (mem_access_addr | PE_MEM_ACCESS_WRITE | PE_MEM_ACCESS_BYTE_ENABLE(0, len)) + offset; ++ ++ for (i = 0; i < len; i++, src++) ++ val |= (*(u8 *)src) << (8 * i); ++ ++ writel(cpu_to_be32(val), pe[id].mem_access_wdata); ++ writel(addr, pe[id].mem_access_addr); ++ } ++} ++ ++/** Writes a buffer to PE internal data memory (DMEM) from the host ++ * through indirect access registers. ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID) ++ * @param[in] src Buffer source address ++ * @param[in] dst DMEM destination address (must be 32bit aligned) ++ * @param[in] len Number of bytes to copy ++ */ ++void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len) ++{ ++ pe_mem_memcpy_to32(id, pe[id].dmem_base_addr | dst | PE_MEM_ACCESS_DMEM, src, len); ++} ++ ++ ++/** Writes a buffer to PE internal program memory (PMEM) from the host ++ * through indirect access registers. ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., TMU3_ID) ++ * @param[in] src Buffer source address ++ * @param[in] dst PMEM destination address (must be 32bit aligned) ++ * @param[in] len Number of bytes to copy ++ */ ++void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len) ++{ ++ pe_mem_memcpy_to32(id, pe[id].pmem_base_addr | (dst & (pe[id].pmem_size - 1)) | PE_MEM_ACCESS_IMEM, src, len); ++} ++ ++ ++/** Reads PE internal program memory (IMEM) from the host ++ * through indirect access registers. ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., TMU3_ID) ++ * @param[in] addr PMEM read address (must be aligned on size) ++ * @param[in] size Number of bytes to read (maximum 4, must not cross 32bit boundaries) ++ * @return the data read (in PE endianess, i.e BE). ++ */ ++u32 pe_pmem_read(int id, u32 addr, u8 size) ++{ ++ u32 offset = addr & 0x3; ++ u32 mask = 0xffffffff >> ((4 - size) << 3); ++ u32 val; ++ ++ addr = pe[id].pmem_base_addr | ((addr & ~0x3) & (pe[id].pmem_size - 1)) | PE_MEM_ACCESS_IMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size); ++ ++ writel(addr, pe[id].mem_access_addr); ++ val = be32_to_cpu(readl(pe[id].mem_access_rdata)); ++ ++ return (val >> (offset << 3)) & mask; ++} ++ ++ ++/** Writes PE internal data memory (DMEM) from the host ++ * through indirect access registers. ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID) ++ * @param[in] addr DMEM write address (must be aligned on size) ++ * @param[in] val Value to write (in PE endianess, i.e BE) ++ * @param[in] size Number of bytes to write (maximum 4, must not cross 32bit boundaries) ++ */ ++void pe_dmem_write(int id, u32 val, u32 addr, u8 size) ++{ ++ u32 offset = addr & 0x3; ++ ++ addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_WRITE | PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size); ++ ++ /* Indirect access interface is byte swapping data being written */ ++ writel(cpu_to_be32(val << (offset << 3)), pe[id].mem_access_wdata); ++ writel(addr, pe[id].mem_access_addr); ++} ++ ++ ++/** Reads PE internal data memory (DMEM) from the host ++ * through indirect access registers. ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID) ++ * @param[in] addr DMEM read address (must be aligned on size) ++ * @param[in] size Number of bytes to read (maximum 4, must not cross 32bit boundaries) ++ * @return the data read (in PE endianess, i.e BE). ++ */ ++u32 pe_dmem_read(int id, u32 addr, u8 size) ++{ ++ u32 offset = addr & 0x3; ++ u32 mask = 0xffffffff >> ((4 - size) << 3); ++ u32 val; ++ ++ addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size); ++ ++ writel(addr, pe[id].mem_access_addr); ++ ++ /* Indirect access interface is byte swapping data being read */ ++ val = be32_to_cpu(readl(pe[id].mem_access_rdata)); ++ ++ return (val >> (offset << 3)) & mask; ++} ++ ++ ++/** This function is used to write to CLASS internal bus peripherals (ccu, pe-lem) from the host ++* through indirect access registers. ++* @param[in] val value to write ++* @param[in] addr Address to write to (must be aligned on size) ++* @param[in] size Number of bytes to write (1, 2 or 4) ++* ++*/ ++void class_bus_write(u32 val, u32 addr, u8 size) ++{ ++ u32 offset = addr & 0x3; ++ ++ writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE); ++ ++ addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | PE_MEM_ACCESS_WRITE | (size << 24); ++ ++ writel(cpu_to_be32(val << (offset << 3)), CLASS_BUS_ACCESS_WDATA); ++ writel(addr, CLASS_BUS_ACCESS_ADDR); ++} ++ ++ ++/** Reads from CLASS internal bus peripherals (ccu, pe-lem) from the host ++* through indirect access registers. ++* @param[in] addr Address to read from (must be aligned on size) ++* @param[in] size Number of bytes to read (1, 2 or 4) ++* @return the read data ++* ++*/ ++u32 class_bus_read(u32 addr, u8 size) ++{ ++ u32 offset = addr & 0x3; ++ u32 mask = 0xffffffff >> ((4 - size) << 3); ++ u32 val; ++ ++ writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE); ++ ++ addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | (size << 24); ++ ++ writel(addr, CLASS_BUS_ACCESS_ADDR); ++ val = be32_to_cpu(readl(CLASS_BUS_ACCESS_RDATA)); ++ ++ return (val >> (offset << 3)) & mask; ++} ++ ++ ++/** Writes data to the cluster memory (PE_LMEM) ++* @param[in] dst PE LMEM destination address (must be 32bit aligned) ++* @param[in] src Buffer source address ++* @param[in] len Number of bytes to copy ++*/ ++void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len) ++{ ++ u32 len32 = len >> 2; ++ int i; ++ ++ for (i = 0; i < len32; i++, src += 4, dst += 4) ++ class_bus_write(*(u32 *)src, dst, 4); ++ ++ if (len & 0x2) ++ { ++ class_bus_write(*(u16 *)src, dst, 2); ++ src += 2; ++ dst += 2; ++ } ++ ++ if (len & 0x1) ++ { ++ class_bus_write(*(u8 *)src, dst, 1); ++ src++; ++ dst++; ++ } ++} ++ ++/** Writes value to the cluster memory (PE_LMEM) ++* @param[in] dst PE LMEM destination address (must be 32bit aligned) ++* @param[in] val Value to write ++* @param[in] len Number of bytes to write ++*/ ++void class_pe_lmem_memset(u32 dst, int val, unsigned int len) ++{ ++ u32 len32 = len >> 2; ++ int i; ++ ++ val = val | (val << 8) | (val << 16) | (val << 24); ++ ++ for (i = 0; i < len32; i++, dst += 4) ++ class_bus_write(val, dst, 4); ++ ++ if (len & 0x2) ++ { ++ class_bus_write(val, dst, 2); ++ dst += 2; ++ } ++ ++ if (len & 0x1) ++ { ++ class_bus_write(val, dst, 1); ++ dst++; ++ } ++} ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ ++/** Writes UTIL program memory (DDR) from the host. ++ * ++ * @param[in] addr Address to write (virtual, must be aligned on size) ++ * @param[in] val Value to write (in PE endianess, i.e BE) ++ * @param[in] size Number of bytes to write (2 or 4) ++ */ ++static void util_pmem_write(u32 val, void *addr, u8 size) ++{ ++ void *addr64 = (void *)((unsigned long)addr & ~0x7); ++ unsigned long off = 8 - ((unsigned long)addr & 0x7) - size; ++ ++ //IMEM should be loaded as a 64bit swapped value in a 64bit aligned location ++ if (size == 4) ++ writel(be32_to_cpu(val), addr64 + off); ++ else ++ writew(be16_to_cpu((u16)val), addr64 + off); ++} ++ ++ ++/** Writes a buffer to UTIL program memory (DDR) from the host. ++ * ++ * @param[in] dst Address to write (virtual, must be at least 16bit aligned) ++ * @param[in] src Buffer to write (in PE endianess, i.e BE, must have same alignment as dst) ++ * @param[in] len Number of bytes to write (must be at least 16bit aligned) ++ */ ++static void util_pmem_memcpy(void *dst, const void *src, unsigned int len) ++{ ++ unsigned int len32; ++ int i; ++ ++ if ((unsigned long)src & 0x2) { ++ util_pmem_write(*(u16 *)src, dst, 2); ++ src += 2; ++ dst += 2; ++ len -= 2; ++ } ++ ++ len32 = len >> 2; ++ ++ for (i = 0; i < len32; i++, dst += 4, src += 4) ++ util_pmem_write(*(u32 *)src, dst, 4); ++ ++ if (len & 0x2) ++ util_pmem_write(*(u16 *)src, dst, len & 0x2); ++} ++#endif ++ ++/** Loads an elf section into pmem ++ * Code needs to be at least 16bit aligned and only PROGBITS sections are supported ++ * ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., TMU3_ID) ++ * @param[in] data pointer to the elf firmware ++ * @param[in] shdr pointer to the elf section header ++ * ++ */ ++static int pe_load_pmem_section(int id, const void *data, Elf32_Shdr *shdr) ++{ ++ u32 offset = be32_to_cpu(shdr->sh_offset); ++ u32 addr = be32_to_cpu(shdr->sh_addr); ++ u32 size = be32_to_cpu(shdr->sh_size); ++ u32 type = be32_to_cpu(shdr->sh_type); ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ if (id == UTIL_ID) ++ { ++ printk(KERN_ERR "%s: unsuported pmem section for UTIL\n", __func__); ++ return -EINVAL; ++ } ++#endif ++ ++ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) ++ { ++ printk(KERN_ERR "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n", ++ __func__, addr, (unsigned long) data + offset); ++ ++ return -EINVAL; ++ } ++ ++ if (addr & 0x1) ++ { ++ printk(KERN_ERR "%s: load address(%x) is not 16bit aligned\n", __func__, addr); ++ return -EINVAL; ++ } ++ ++ if (size & 0x1) ++ { ++ printk(KERN_ERR "%s: load size(%x) is not 16bit aligned\n", __func__, size); ++ return -EINVAL; ++ } ++ ++ switch (type) ++ { ++ case SHT_PROGBITS: ++ pe_pmem_memcpy_to32(id, addr, data + offset, size); ++ ++ break; ++ ++ default: ++ printk(KERN_ERR "%s: unsuported section type(%x)\n", __func__, type); ++ return -EINVAL; ++ break; ++ } ++ ++ return 0; ++} ++ ++ ++/** Loads an elf section into dmem ++ * Data needs to be at least 32bit aligned, NOBITS sections are correctly initialized to 0 ++ * ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID) ++ * @param[in] data pointer to the elf firmware ++ * @param[in] shdr pointer to the elf section header ++ * ++ */ ++static int pe_load_dmem_section(int id, const void *data, Elf32_Shdr *shdr) ++{ ++ u32 offset = be32_to_cpu(shdr->sh_offset); ++ u32 addr = be32_to_cpu(shdr->sh_addr); ++ u32 size = be32_to_cpu(shdr->sh_size); ++ u32 type = be32_to_cpu(shdr->sh_type); ++ u32 size32 = size >> 2; ++ int i; ++ ++ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) ++ { ++ printk(KERN_ERR "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n", ++ __func__, addr, (unsigned long)data + offset); ++ ++ return -EINVAL; ++ } ++ ++ if (addr & 0x3) ++ { ++ printk(KERN_ERR "%s: load address(%x) is not 32bit aligned\n", __func__, addr); ++ return -EINVAL; ++ } ++ ++ switch (type) ++ { ++ case SHT_PROGBITS: ++ pe_dmem_memcpy_to32(id, addr, data + offset, size); ++ break; ++ ++ case SHT_NOBITS: ++ for (i = 0; i < size32; i++, addr += 4) ++ pe_dmem_write(id, 0, addr, 4); ++ ++ if (size & 0x3) ++ pe_dmem_write(id, 0, addr, size & 0x3); ++ ++ break; ++ ++ default: ++ printk(KERN_ERR "%s: unsuported section type(%x)\n", __func__, type); ++ return -EINVAL; ++ break; ++ } ++ ++ return 0; ++} ++ ++ ++/** Loads an elf section into DDR ++ * Data needs to be at least 32bit aligned, NOBITS sections are correctly initialized to 0 ++ * ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID) ++ * @param[in] data pointer to the elf firmware ++ * @param[in] shdr pointer to the elf section header ++ * ++ */ ++static int pe_load_ddr_section(int id, const void *data, Elf32_Shdr *shdr, struct device *dev) ++{ ++ u32 offset = be32_to_cpu(shdr->sh_offset); ++ u32 addr = be32_to_cpu(shdr->sh_addr); ++ u32 size = be32_to_cpu(shdr->sh_size); ++ u32 type = be32_to_cpu(shdr->sh_type); ++ u32 flags = be32_to_cpu(shdr->sh_flags); ++ ++ switch (type) ++ { ++ case SHT_PROGBITS: ++ if (flags & SHF_EXECINSTR) ++ { ++ if (id <= CLASS_MAX_ID) ++ { ++ /* DO the loading only once in DDR */ ++ if (id == CLASS0_ID) ++ { ++ printk(KERN_ERR "%s: load address(%x) and elf file address(%lx) rcvd\n", __func__, addr, (unsigned long)data + offset); ++ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) ++ { ++ printk(KERN_ERR "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n", ++ __func__, addr, (unsigned long)data + offset); ++ ++ return -EINVAL; ++ } ++ ++ if (addr & 0x1) ++ { ++ printk(KERN_ERR "%s: load address(%x) is not 16bit aligned\n", __func__, addr); ++ return -EINVAL; ++ } ++ ++ if (size & 0x1) ++ { ++ printk(KERN_ERR "%s: load length(%x) is not 16bit aligned\n", __func__, size); ++ return -EINVAL; ++ } ++ memcpy(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), data + offset, size); ++ } ++ } ++#if !defined(CONFIG_UTIL_DISABLED) ++ else if (id == UTIL_ID) ++ { ++ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) ++ { ++ printk(KERN_ERR "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n", ++ __func__, addr, (unsigned long)data + offset); ++ ++ return -EINVAL; ++ } ++ ++ if (addr & 0x1) ++ { ++ printk(KERN_ERR "%s: load address(%x) is not 16bit aligned\n", __func__, addr); ++ return -EINVAL; ++ } ++ ++ if (size & 0x1) ++ { ++ printk(KERN_ERR "%s: load length(%x) is not 16bit aligned\n", __func__, size); ++ return -EINVAL; ++ } ++ ++ util_pmem_memcpy(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), data + offset, size); ++ } ++#endif ++ else ++ { ++ printk(KERN_ERR "%s: unsuported ddr section type(%x) for PE(%d)\n", __func__, type, id); ++ return -EINVAL; ++ } ++ ++ } ++ else ++ { ++ memcpy(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), data + offset, size); ++ } ++ ++ break; ++ ++ case SHT_NOBITS: ++ memset(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), 0, size); ++ ++ break; ++ ++ default: ++ printk(KERN_ERR "%s: unsuported section type(%x)\n", __func__, type); ++ return -EINVAL; ++ break; ++ } ++ ++ return 0; ++} ++ ++ ++/** Loads an elf section into pe lmem ++ * Data needs to be at least 32bit aligned, NOBITS sections are correctly initialized to 0 ++ * ++ * @param[in] id PE identification (CLASS0_ID,..., CLASS5_ID) ++ * @param[in] data pointer to the elf firmware ++ * @param[in] shdr pointer to the elf section header ++ * ++ */ ++static int pe_load_pe_lmem_section(int id, const void *data, Elf32_Shdr *shdr) ++{ ++ u32 offset = be32_to_cpu(shdr->sh_offset); ++ u32 addr = be32_to_cpu(shdr->sh_addr); ++ u32 size = be32_to_cpu(shdr->sh_size); ++ u32 type = be32_to_cpu(shdr->sh_type); ++ ++ if (id > CLASS_MAX_ID) ++ { ++ printk(KERN_ERR "%s: unsuported pe-lmem section type(%x) for PE(%d)\n", __func__, type, id); ++ return -EINVAL; ++ } ++ ++ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) ++ { ++ printk(KERN_ERR "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n", ++ __func__, addr, (unsigned long)data + offset); ++ ++ return -EINVAL; ++ } ++ ++ if (addr & 0x3) ++ { ++ printk(KERN_ERR "%s: load address(%x) is not 32bit aligned\n", __func__, addr); ++ return -EINVAL; ++ } ++ ++ switch (type) ++ { ++ case SHT_PROGBITS: ++ class_pe_lmem_memcpy_to32(addr, data + offset, size); ++ break; ++ ++ case SHT_NOBITS: ++ class_pe_lmem_memset(addr, 0, size); ++ break; ++ ++ default: ++ printk(KERN_ERR "%s: unsuported section type(%x)\n", __func__, type); ++ return -EINVAL; ++ break; ++ } ++ ++ return 0; ++} ++ ++ ++/** Loads an elf section into a PE ++ * For now only supports loading a section to dmem (all PE's), pmem (class and tmu PE's), ++ * DDDR (util PE code) ++ * ++ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID) ++ * @param[in] data pointer to the elf firmware ++ * @param[in] shdr pointer to the elf section header ++ * ++ */ ++int pe_load_elf_section(int id, const void *data, Elf32_Shdr *shdr, struct device *dev) ++{ ++ u32 addr = be32_to_cpu(shdr->sh_addr); ++ u32 size = be32_to_cpu(shdr->sh_size); ++ ++ if (IS_DMEM(addr, size)) ++ return pe_load_dmem_section(id, data, shdr); ++ else if (IS_PMEM(addr, size)) ++ return pe_load_pmem_section(id, data, shdr); ++ else if (IS_PFE_LMEM(addr, size)) ++ return 0; /* FIXME */ ++ else if (IS_PHYS_DDR(addr, size)) ++ return pe_load_ddr_section(id, data, shdr, dev); ++ else if (IS_PE_LMEM(addr, size)) ++ return pe_load_pe_lmem_section(id, data, shdr); ++ else { ++ printk(KERN_ERR "%s: unsuported memory range(%x)\n", __func__, addr); ++// return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++ ++/**************************** BMU ***************************/ ++ ++/** Initializes a BMU block. ++* @param[in] base BMU block base address ++* @param[in] cfg BMU configuration ++*/ ++void bmu_init(void *base, BMU_CFG *cfg) ++{ ++ bmu_disable(base); ++ ++ bmu_set_config(base, cfg); ++ ++ bmu_reset(base); ++} ++ ++/** Resets a BMU block. ++* @param[in] base BMU block base address ++*/ ++void bmu_reset(void *base) ++{ ++ writel(CORE_SW_RESET, base + BMU_CTRL); ++ ++ /* Wait for self clear */ ++ while (readl(base + BMU_CTRL) & CORE_SW_RESET) ; ++} ++ ++/** Enabled a BMU block. ++* @param[in] base BMU block base address ++*/ ++void bmu_enable(void *base) ++{ ++ writel (CORE_ENABLE, base + BMU_CTRL); ++} ++ ++/** Disables a BMU block. ++* @param[in] base BMU block base address ++*/ ++void bmu_disable(void *base) ++{ ++ writel (CORE_DISABLE, base + BMU_CTRL); ++} ++ ++/** Sets the configuration of a BMU block. ++* @param[in] base BMU block base address ++* @param[in] cfg BMU configuration ++*/ ++void bmu_set_config(void *base, BMU_CFG *cfg) ++{ ++ writel (cfg->baseaddr, base + BMU_UCAST_BASE_ADDR); ++ writel (cfg->count & 0xffff, base + BMU_UCAST_CONFIG); ++ writel (cfg->size & 0xffff, base + BMU_BUF_SIZE); ++// writel (BMU1_THRES_CNT, base + BMU_THRES); ++ ++ /* Interrupts are never used */ ++// writel (0x0, base + BMU_INT_SRC); ++ writel (0x0, base + BMU_INT_ENABLE); ++} ++#if defined(CONFIG_PLATFORM_C2000) ++/**************************** GEMAC ***************************/ ++ ++/** Enable Rx Checksum Engine. With this enabled, Frame with bad IP, ++ * TCP or UDP checksums are discarded ++ * ++ * @param[in] base GEMAC base address. ++ */ ++void gemac_enable_rx_checksum_offload(void *base) ++{ ++ writel(readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_CHKSUM_RX, base + EMAC_NETWORK_CONFIG); ++ writel(readl(CLASS_L4_CHKSUM_ADDR) | IPV4_CHKSUM_DROP, CLASS_L4_CHKSUM_ADDR); ++} ++ ++/** Disable Rx Checksum Engine. ++ * ++ * @param[in] base GEMAC base address. ++ */ ++void gemac_disable_rx_checksum_offload(void *base) ++{ ++ writel(readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_CHKSUM_RX, base + EMAC_NETWORK_CONFIG); ++ writel(readl(CLASS_L4_CHKSUM_ADDR) & ~IPV4_CHKSUM_DROP, CLASS_L4_CHKSUM_ADDR); ++} ++ ++/** Setup the MII Mgmt clock speed. ++ * @param[in] base GEMAC base address (GEMAC0, GEMAC1, GEMAC2) ++ * @param[in] mdc_div MII clock dividor ++ */ ++void gemac_set_mdc_div(void *base, int mdc_div) ++{ ++ u32 val = readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_MDC_DIV_MASK; ++ u32 div; ++ ++ switch (mdc_div) { ++ case 8: ++ div = 0; ++ break; ++ ++ case 16: ++ div = 1; ++ break; ++ ++ case 32: ++ div = 2; ++ break; ++ ++ case 48: ++ div = 3; ++ break; ++ ++ default: ++ case 64: ++ div = 4; ++ break; ++ ++ case 96: ++ div = 5; ++ break; ++ ++ case 128: ++ div = 6; ++ break; ++ ++ case 224: ++ div = 7; ++ break; ++ } ++ ++ val |= div << 18; ++ ++ writel(val, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC set speed. ++* @param[in] base GEMAC base address ++* @param[in] speed GEMAC speed (10, 100 or 1000 Mbps) ++*/ ++void gemac_set_speed(void *base, MAC_SPEED gem_speed) ++{ ++ u32 val = readl(base + EMAC_NETWORK_CONFIG); ++ ++ val = val & ~EMAC_SPEED_MASK; ++ ++ switch (gem_speed) ++ { ++ case SPEED_10M: ++ val &= (~EMAC_PCS_ENABLE); ++ break; ++ ++ case SPEED_100M: ++ val = val | EMAC_SPEED_100; ++ val &= (~EMAC_PCS_ENABLE); ++ break; ++ ++ case SPEED_1000M: ++ val = val | EMAC_SPEED_1000; ++ val &= (~EMAC_PCS_ENABLE); ++ break; ++ ++ case SPEED_1000M_PCS: ++ val = val | EMAC_SPEED_1000; ++ val |= EMAC_PCS_ENABLE; ++ break; ++ ++ default: ++ val = val | EMAC_SPEED_100; ++ val &= (~EMAC_PCS_ENABLE); ++ break; ++ } ++ ++ writel (val, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC set duplex. ++* @param[in] base GEMAC base address ++* @param[in] duplex GEMAC duplex mode (Full, Half) ++*/ ++void gemac_set_duplex(void *base, int duplex) ++{ ++ u32 val = readl(base + EMAC_NETWORK_CONFIG); ++ ++ if (duplex == DUPLEX_HALF) ++ val = (val & ~EMAC_DUPLEX_MASK) | EMAC_HALF_DUP; ++ else ++ val = (val & ~EMAC_DUPLEX_MASK) | EMAC_FULL_DUP; ++ ++ writel (val, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC set mode. ++* @param[in] base GEMAC base address ++* @param[in] mode GEMAC operation mode (MII, RMII, RGMII, SGMII) ++*/ ++ ++#if defined(CONFIG_IP_ALIGNED) ++#define IP_ALIGNED_BITVAL EMAC_TWO_BYTES_IP_ALIGN ++#else ++#define IP_ALIGNED_BITVAL 0 ++#endif ++ ++void gemac_set_mode(void *base, int mode) ++{ ++ switch (mode) ++ { ++ case GMII: ++ writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_GMII_MODE_ENABLE | IP_ALIGNED_BITVAL, base + EMAC_CONTROL); ++ writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG); ++ break; ++ ++ case RGMII: ++ writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_RGMII_MODE_ENABLE | IP_ALIGNED_BITVAL, base + EMAC_CONTROL); ++ writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG); ++ break; ++ ++ case RMII: ++ writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_RMII_MODE_ENABLE | IP_ALIGNED_BITVAL, base + EMAC_CONTROL); ++ writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG); ++ break; ++ ++ case MII: ++ writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_MII_MODE_ENABLE | IP_ALIGNED_BITVAL, base + EMAC_CONTROL); ++ writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG); ++ break; ++ ++ case SGMII: ++ writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | (EMAC_RMII_MODE_DISABLE | EMAC_RGMII_MODE_DISABLE) | IP_ALIGNED_BITVAL, base + EMAC_CONTROL); ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_SGMII_MODE_ENABLE, base + EMAC_NETWORK_CONFIG); ++ break; ++ ++ default: ++ writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_MII_MODE_ENABLE | IP_ALIGNED_BITVAL, base + EMAC_CONTROL); ++ writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG); ++ break; ++ } ++} ++/** GEMAC Enable MDIO: Activate the Management interface. This is required to program the PHY ++ * @param[in] base GEMAC base address ++ */ ++void gemac_enable_mdio(void *base) ++{ ++ u32 data; ++ ++ data = readl(base + EMAC_NETWORK_CONTROL); ++ data |= EMAC_MDIO_EN; ++ writel(data, base + EMAC_NETWORK_CONTROL); ++} ++ ++/** GEMAC Disable MDIO: Disable the Management interface. ++ * @param[in] base GEMAC base address ++ */ ++void gemac_disable_mdio(void *base) ++{ ++ u32 data; ++ ++ data = readl(base + EMAC_NETWORK_CONTROL); ++ data &= ~EMAC_MDIO_EN; ++ writel(data, base + EMAC_NETWORK_CONTROL); ++} ++ ++ ++/** GEMAC reset function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_reset(void *base) ++{ ++} ++ ++/** GEMAC enable function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONTROL) | EMAC_TX_ENABLE | EMAC_RX_ENABLE, base + EMAC_NETWORK_CONTROL); ++} ++ ++/** GEMAC disable function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONTROL) & ~(EMAC_TX_ENABLE | EMAC_RX_ENABLE), base + EMAC_NETWORK_CONTROL); ++} ++ ++/** GEMAC TX disable function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_tx_disable(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONTROL) & ~(EMAC_TX_ENABLE), base + EMAC_NETWORK_CONTROL); ++} ++ ++/** GEMAC set mac address configuration. ++* @param[in] base GEMAC base address ++* @param[in] addr MAC address to be configured ++*/ ++void gemac_set_address(void *base, SPEC_ADDR *addr) ++{ ++ writel(addr->one.bottom, base + EMAC_SPEC1_ADD_BOT); ++ writel(addr->one.top, base + EMAC_SPEC1_ADD_TOP); ++ writel(addr->two.bottom, base + EMAC_SPEC2_ADD_BOT); ++ writel(addr->two.top, base + EMAC_SPEC2_ADD_TOP); ++ writel(addr->three.bottom, base + EMAC_SPEC3_ADD_BOT); ++ writel(addr->three.top, base + EMAC_SPEC3_ADD_TOP); ++ writel(addr->four.bottom, base + EMAC_SPEC4_ADD_BOT); ++ writel(addr->four.top, base + EMAC_SPEC4_ADD_TOP); ++} ++ ++/** GEMAC get mac address configuration. ++* @param[in] base GEMAC base address ++* ++* @return MAC addresses configured ++*/ ++SPEC_ADDR gemac_get_address(void *base) ++{ ++ SPEC_ADDR addr; ++ ++ addr.one.bottom = readl(base + EMAC_SPEC1_ADD_BOT); ++ addr.one.top = readl(base + EMAC_SPEC1_ADD_TOP); ++ addr.two.bottom = readl(base + EMAC_SPEC2_ADD_BOT); ++ addr.two.top = readl(base + EMAC_SPEC2_ADD_TOP); ++ addr.three.bottom = readl(base + EMAC_SPEC3_ADD_BOT); ++ addr.three.top = readl(base + EMAC_SPEC3_ADD_TOP); ++ addr.four.bottom = readl(base + EMAC_SPEC4_ADD_BOT); ++ addr.four.top = readl(base + EMAC_SPEC4_ADD_TOP); ++ ++ return addr; ++} ++ ++/** Sets the hash register of the MAC. ++ * This register is used for matching unicast and multicast frames. ++ * ++ * @param[in] base GEMAC base address. ++ * @param[in] hash 64-bit hash to be configured. ++ */ ++void gemac_set_hash( void *base, MAC_ADDR *hash ) ++{ ++ writel(hash->bottom, base + EMAC_HASH_BOT); ++ writel(hash->top, base + EMAC_HASH_TOP); ++} ++ ++/** Get the current value hash register of the MAC. ++ * This register is used for matching unicast and multicast frames. ++ * ++ * @param[in] base GEMAC base address ++ ++ * @returns 64-bit hash. ++ */ ++MAC_ADDR gemac_get_hash( void *base ) ++{ ++ MAC_ADDR hash; ++ ++ hash.bottom = readl(base + EMAC_HASH_BOT); ++ hash.top = readl(base + EMAC_HASH_TOP); ++ ++ return hash; ++} ++ ++/** GEMAC set specific local addresses of the MAC. ++* Rather than setting up all four specific addresses, this function sets them up individually. ++* ++* @param[in] base GEMAC base address ++* @param[in] addr MAC address to be configured ++*/ ++void gemac_set_laddr1(void *base, MAC_ADDR *address) ++{ ++ writel(address->bottom, base + EMAC_SPEC1_ADD_BOT); ++ writel(address->top, base + EMAC_SPEC1_ADD_TOP); ++} ++ ++ ++void gemac_set_laddr2(void *base, MAC_ADDR *address) ++{ ++ writel(address->bottom, base + EMAC_SPEC2_ADD_BOT); ++ writel(address->top, base + EMAC_SPEC2_ADD_TOP); ++} ++ ++ ++void gemac_set_laddr3(void *base, MAC_ADDR *address) ++{ ++ writel(address->bottom, base + EMAC_SPEC3_ADD_BOT); ++ writel(address->top, base + EMAC_SPEC3_ADD_TOP); ++} ++ ++ ++void gemac_set_laddr4(void *base, MAC_ADDR *address) ++{ ++ writel(address->bottom, base + EMAC_SPEC4_ADD_BOT); ++ writel(address->top, base + EMAC_SPEC4_ADD_TOP); ++} ++ ++void gemac_set_laddrN(void *base, MAC_ADDR *address, unsigned int entry_index) ++{ ++ if( (entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX) ) ++ return; ++ ++ entry_index = entry_index - 1; ++ ++ if (entry_index < 4) ++ { ++ writel(address->bottom, base + (entry_index * 8) + EMAC_SPEC1_ADD_BOT); ++ writel(address->top, base + (entry_index * 8) + EMAC_SPEC1_ADD_TOP); ++ } ++ else ++ { ++ writel(address->bottom, base + ((entry_index - 4) * 8) + EMAC_SPEC5_ADD_BOT); ++ writel(address->top, base + ((entry_index - 4) * 8) + EMAC_SPEC5_ADD_TOP); ++ } ++} ++ ++/** Get specific local addresses of the MAC. ++* This allows returning of a single specific address stored in the MAC. ++* @param[in] base GEMAC base address ++* ++* @return Specific MAC address 1 ++* ++*/ ++MAC_ADDR gem_get_laddr1(void *base) ++{ ++ MAC_ADDR addr; ++ addr.bottom = readl(base + EMAC_SPEC1_ADD_BOT); ++ addr.top = readl(base + EMAC_SPEC1_ADD_TOP); ++ return addr; ++} ++ ++ ++MAC_ADDR gem_get_laddr2(void *base) ++{ ++ MAC_ADDR addr; ++ addr.bottom = readl(base + EMAC_SPEC2_ADD_BOT); ++ addr.top = readl(base + EMAC_SPEC2_ADD_TOP); ++ return addr; ++} ++ ++ ++MAC_ADDR gem_get_laddr3(void *base) ++{ ++ MAC_ADDR addr; ++ addr.bottom = readl(base + EMAC_SPEC3_ADD_BOT); ++ addr.top = readl(base + EMAC_SPEC3_ADD_TOP); ++ return addr; ++} ++ ++ ++MAC_ADDR gem_get_laddr4(void *base) ++{ ++ MAC_ADDR addr; ++ addr.bottom = readl(base + EMAC_SPEC4_ADD_BOT); ++ addr.top = readl(base + EMAC_SPEC4_ADD_TOP); ++ return addr; ++} ++ ++MAC_ADDR gem_get_laddrN(void *base, unsigned int entry_index) ++{ ++ MAC_ADDR addr = {0xffffffff, 0xffffffff}; ++ ++ if( (entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX) ) ++ return addr; ++ ++ entry_index = entry_index - 1; ++ ++ if (entry_index < 4) ++ { ++ addr.bottom = readl(base + (entry_index * 8) + EMAC_SPEC1_ADD_BOT); ++ addr.top = readl(base + (entry_index * 8) + EMAC_SPEC1_ADD_TOP); ++ } ++ else ++ { ++ addr.bottom = readl(base + ((entry_index - 4) * 8) + EMAC_SPEC5_ADD_BOT); ++ addr.top = readl(base + ((entry_index - 4) * 8) + EMAC_SPEC5_ADD_TOP); ++ } ++ ++ return addr; ++} ++ ++/** Clear specific local addresses of the MAC. ++ * @param[in] base GEMAC base address ++ */ ++ ++void gemac_clear_laddr1(void *base) ++{ ++ writel(0, base + EMAC_SPEC1_ADD_BOT); ++} ++ ++void gemac_clear_laddr2(void *base) ++{ ++ writel(0, base + EMAC_SPEC2_ADD_BOT); ++} ++ ++void gemac_clear_laddr3(void *base) ++{ ++ writel(0, base + EMAC_SPEC3_ADD_BOT); ++} ++ ++void gemac_clear_laddr4(void *base) ++{ ++ writel(0, base + EMAC_SPEC4_ADD_BOT); ++} ++ ++void gemac_clear_laddrN(void *base, unsigned int entry_index) ++{ ++ if( (entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX) ) ++ return; ++ ++ entry_index = entry_index - 1; ++ ++ if ( entry_index < 4 ) ++ writel(0, base + (entry_index * 8) + EMAC_SPEC1_ADD_BOT); ++ else ++ writel(0, base + ((entry_index - 4) * 8) + EMAC_SPEC5_ADD_BOT); ++} ++ ++/** Set the loopback mode of the MAC. This can be either no loopback for normal ++ * operation, local loopback through MAC internal loopback module or PHY ++ * loopback for external loopback through a PHY. This asserts the external loop ++ * pin. ++ * ++ * @param[in] base GEMAC base address. ++ * @param[in] gem_loop Loopback mode to be enabled. LB_LOCAL - MAC Loopback, ++ * LB_EXT - PHY Loopback. ++ */ ++void gemac_set_loop( void *base, MAC_LOOP gem_loop ) ++{ ++ switch (gem_loop) { ++ case LB_LOCAL: ++ writel(readl(base + EMAC_NETWORK_CONTROL) & (~EMAC_LB_PHY), ++ base + EMAC_NETWORK_CONTROL); ++ writel(readl(base + EMAC_NETWORK_CONTROL) | (EMAC_LB_MAC), ++ base + EMAC_NETWORK_CONTROL); ++ break; ++ case LB_EXT: ++ writel(readl(base + EMAC_NETWORK_CONTROL) & (~EMAC_LB_MAC), ++ base + EMAC_NETWORK_CONTROL); ++ writel(readl(base + EMAC_NETWORK_CONTROL) | (EMAC_LB_PHY), ++ base + EMAC_NETWORK_CONTROL); ++ break; ++ default: ++ writel(readl(base + EMAC_NETWORK_CONTROL) & (~(EMAC_LB_MAC | EMAC_LB_PHY)), ++ base + EMAC_NETWORK_CONTROL); ++ } ++} ++ ++/** GEMAC allow frames ++ * @param[in] base GEMAC base address ++ */ ++void gemac_enable_copy_all(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_COPY_ALL, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC do not allow frames ++ * @param[in] base GEMAC base address ++*/ ++void gemac_disable_copy_all(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_COPY_ALL, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC allow broadcast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_allow_broadcast(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_NO_BROADCAST, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC no broadcast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_no_broadcast(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_NO_BROADCAST, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC enable unicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_unicast(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_UNICAST, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC disable unicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_unicast(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_UNICAST, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC enable multicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_multicast(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_MULTICAST, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC disable multicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_multicast(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_MULTICAST, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC enable fcs rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_fcs_rx(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_FCS_RX, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC disable fcs rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_fcs_rx(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_FCS_RX, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC enable 1536 rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_1536_rx(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_1536_RX, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC disable 1536 rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_1536_rx(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_1536_RX, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC enable jumbo function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_rx_jmb(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_JUMBO_FRAME, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC disable jumbo function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_rx_jmb(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_JUMBO_FRAME, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC enable stacked vlan function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_stacked_vlan(void *base) ++{ ++ writel (readl(base + EMAC_STACKED_VLAN_REG) | EMAC_ENABLE_STACKED_VLAN, base + EMAC_STACKED_VLAN_REG); ++} ++ ++/** GEMAC enable stacked vlan function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_stacked_vlan(void *base) ++{ ++ writel (readl(base + EMAC_STACKED_VLAN_REG) & ~EMAC_ENABLE_STACKED_VLAN, base + EMAC_STACKED_VLAN_REG); ++} ++ ++/** GEMAC enable pause rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_pause_rx(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_PAUSE_RX, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC disable pause rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_pause_rx(void *base) ++{ ++ writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_PAUSE_RX, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** GEMAC wol configuration ++* @param[in] base GEMAC base address ++* @param[in] wol_conf WoL register configuration ++*/ ++void gemac_set_wol(void *base, u32 wol_conf) ++{ ++ writel(wol_conf, base + EMAC_WOL); ++} ++ ++/** Sets Gemac bus width to 64bit ++ * @param[in] base GEMAC base address ++ * @param[in] width gemac bus width to be set possible values are 32/64/128 ++ * */ ++void gemac_set_bus_width(void *base, int width) ++{ ++ u32 val = readl(base + EMAC_NETWORK_CONFIG); ++ switch(width) ++ { ++ case 32: ++ val = (val & ~EMAC_DATA_BUS_WIDTH_MASK) | EMAC_DATA_BUS_WIDTH_32; ++ case 128: ++ val = (val & ~EMAC_DATA_BUS_WIDTH_MASK) | EMAC_DATA_BUS_WIDTH_128; ++ case 64: ++ default: ++ val = (val & ~EMAC_DATA_BUS_WIDTH_MASK) | EMAC_DATA_BUS_WIDTH_64; ++ ++ } ++ writel (val, base + EMAC_NETWORK_CONFIG); ++} ++ ++/** Sets Gemac configuration. ++* @param[in] base GEMAC base address ++* @param[in] cfg GEMAC configuration ++*/ ++void gemac_set_config(void *base, GEMAC_CFG *cfg) ++{ ++ gemac_set_mode(base, cfg->mode); ++ ++ gemac_set_speed(base, cfg->speed); ++ ++ gemac_set_duplex(base,cfg->duplex); ++} ++#elif defined(CONFIG_PLATFORM_LS1012A) ++/**************************** MTIP GEMAC ***************************/ ++ ++/** Enable Rx Checksum Engine. With this enabled, Frame with bad IP, ++ * TCP or UDP checksums are discarded ++ * ++ * @param[in] base GEMAC base address. ++ */ ++void gemac_enable_rx_checksum_offload(void *base) ++{ ++ /*Do not find configuration to do this */ ++} ++ ++/** Disable Rx Checksum Engine. ++ * ++ * @param[in] base GEMAC base address. ++ */ ++void gemac_disable_rx_checksum_offload(void *base) ++{ ++ /*Do not find configuration to do this */ ++} ++ ++/** GEMAC set speed. ++* @param[in] base GEMAC base address ++* @param[in] speed GEMAC speed (10, 100 or 1000 Mbps) ++*/ ++void gemac_set_speed(void *base, MAC_SPEED gem_speed) ++{ ++ u32 ecr = readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_SPEED; ++ u32 rcr = readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_RMII_10T; ++ ++ switch (gem_speed) ++ { ++ case SPEED_10M: ++ rcr |= EMAC_RCNTRL_RMII_10T; ++ break; ++ ++ ++ case SPEED_1000M: ++ ecr |= EMAC_ECNTRL_SPEED; ++ break; ++ ++ case SPEED_100M: ++ default: ++ /*It is in 100M mode */ ++ break; ++ } ++ writel(ecr, (base + EMAC_ECNTRL_REG)); ++ writel(rcr, (base + EMAC_RCNTRL_REG)); ++} ++ ++/** GEMAC set duplex. ++* @param[in] base GEMAC base address ++* @param[in] duplex GEMAC duplex mode (Full, Half) ++*/ ++void gemac_set_duplex(void *base, int duplex) ++{ ++ ++ if (duplex == DUPLEX_HALF) { ++ printk("%s() TODO\n", __func__); ++ writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_FDEN, base + EMAC_TCNTRL_REG); ++ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_DRT, (base + EMAC_RCNTRL_REG)); ++ }else{ ++ writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_FDEN, base + EMAC_TCNTRL_REG); ++ writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_DRT, (base + EMAC_RCNTRL_REG)); ++ } ++} ++ ++/** GEMAC set mode. ++* @param[in] base GEMAC base address ++* @param[in] mode GEMAC operation mode (MII, RMII, RGMII, SGMII) ++*/ ++void gemac_set_mode(void *base, int mode) ++{ ++ u32 val = readl(base + EMAC_RCNTRL_REG); ++ ++ /*Remove loopbank*/ ++ val &= ~EMAC_RCNTRL_LOOP; ++ ++ /*Enable flow control and MII mode*/ ++ val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE); ++ ++ writel(val, base + EMAC_RCNTRL_REG); ++} ++ ++/** GEMAC enable function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable(void *base) ++{ ++ writel(readl(base + EMAC_ECNTRL_REG) | EMAC_ECNTRL_ETHER_EN, base + EMAC_ECNTRL_REG); ++} ++ ++/** GEMAC disable function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable(void *base) ++{ ++ writel(readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_ETHER_EN, base + EMAC_ECNTRL_REG); ++} ++ ++/** GEMAC TX disable function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_tx_disable(void *base) ++{ ++ writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_GTS, base + EMAC_TCNTRL_REG); ++} ++ ++/** Sets the hash register of the MAC. ++ * This register is used for matching unicast and multicast frames. ++ * ++ * @param[in] base GEMAC base address. ++ * @param[in] hash 64-bit hash to be configured. ++ */ ++void gemac_set_hash( void *base, MAC_ADDR *hash ) ++{ ++ writel(hash->bottom, base + EMAC_GALR); ++ writel(hash->top, base + EMAC_GAUR); ++} ++ ++void gemac_set_laddrN(void *base, MAC_ADDR *address, unsigned int entry_index) ++{ ++ if( (entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX) ) ++ return; ++ ++ entry_index = entry_index - 1; ++ if (entry_index < 1) { ++ writel(htonl(address->bottom), base + EMAC_PHY_ADDR_LOW); ++ writel((htonl(address->top) | 0x8808), base + EMAC_PHY_ADDR_HIGH); ++ } ++ else ++ { ++ /* TODO for other entry_index */ ++ /*printk("%s for entry_index %d \n",__func__, entry_index); */ ++ writel(htonl(address->bottom), base + ((entry_index - 1) * 8) + EMAC_SMAC_0_0); ++ writel((htonl(address->top) | 0x8808), base + ((entry_index - 1) * 8) + EMAC_SMAC_0_1); ++ } ++ ++} ++ ++void gemac_clear_laddrN(void *base, unsigned int entry_index) ++{ ++ if( (entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX) ) ++ return; ++ ++ entry_index = entry_index - 1; ++ if (entry_index < 1) { ++ writel(0, base + EMAC_PHY_ADDR_LOW); ++ writel(0, base + EMAC_PHY_ADDR_HIGH); ++ } ++ else ++ { ++ writel(0, base + ((entry_index - 1) * 8) + EMAC_SMAC_0_0); ++ writel(0, base + ((entry_index - 1) * 8) + EMAC_SMAC_0_1); ++ } ++ ++ ++} ++ ++/** Set the loopback mode of the MAC. This can be either no loopback for normal ++ * operation, local loopback through MAC internal loopback module or PHY ++ * loopback for external loopback through a PHY. This asserts the external loop ++ * pin. ++ * ++ * @param[in] base GEMAC base address. ++ * @param[in] gem_loop Loopback mode to be enabled. LB_LOCAL - MAC Loopback, ++ * LB_EXT - PHY Loopback. ++ */ ++void gemac_set_loop( void *base, MAC_LOOP gem_loop ) ++{ ++ printk("%s()\n", __func__); ++ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_LOOP, (base + EMAC_RCNTRL_REG)); ++} ++ ++ ++/** GEMAC allow frames ++ * @param[in] base GEMAC base address ++ */ ++void gemac_enable_copy_all(void *base) ++{ ++ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_PROM, (base + EMAC_RCNTRL_REG)); ++} ++ ++/** GEMAC do not allow frames ++ * @param[in] base GEMAC base address ++*/ ++void gemac_disable_copy_all(void *base) ++{ ++ writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_PROM, (base + EMAC_RCNTRL_REG)); ++} ++ ++/** GEMAC allow broadcast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_allow_broadcast(void *base) ++{ ++ writel (readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_BC_REJ, base + EMAC_RCNTRL_REG); ++} ++ ++/** GEMAC no broadcast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_no_broadcast(void *base) ++{ ++ writel (readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_BC_REJ, base + EMAC_RCNTRL_REG); ++} ++ ++/** GEMAC enable unicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_unicast(void *base) ++{ ++ return; ++} ++ ++/** GEMAC disable unicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_unicast(void *base) ++{ ++ return; ++} ++ ++/** GEMAC enable multicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_multicast(void *base) ++{ ++ return; ++} ++ ++/** GEMAC disable multicast function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_multicast(void *base) ++{ ++ /* TODO how to disable multicast? */ ++ return; ++} ++ ++/** GEMAC enable fcs rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_fcs_rx(void *base) ++{ ++ /*Do not find configuration to do this */ ++} ++ ++/** GEMAC disable fcs rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_fcs_rx(void *base) ++{ ++ /*Do not find configuration to do this */ ++} ++ ++ ++/** GEMAC enable 1536 rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_1536_rx(void *base) ++{ ++ /* Set 1536 as Maximum frame length */ ++ writel (readl(base + EMAC_RCNTRL_REG) | (1536 << 16), base + EMAC_RCNTRL_REG); ++} ++ ++/** GEMAC enable jumbo function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_rx_jmb(void *base) ++{ ++ /*TODO what is the jumbo size supported by MTIP */ ++ writel (readl(base + EMAC_RCNTRL_REG) | (JUMBO_FRAME_SIZE << 16), base + EMAC_RCNTRL_REG); ++} ++ ++/** GEMAC enable stacked vlan function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_stacked_vlan(void *base) ++{ ++ /* MTIP doesn't support stacked vlan */ ++ return; ++} ++ ++/** GEMAC enable pause rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_enable_pause_rx(void *base) ++{ ++ writel (readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_FCE, base + EMAC_RCNTRL_REG); ++} ++ ++/** GEMAC disable pause rx function. ++* @param[in] base GEMAC base address ++*/ ++void gemac_disable_pause_rx(void *base) ++{ ++ writel (readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_FCE, base + EMAC_RCNTRL_REG); ++} ++ ++/** GEMAC wol configuration ++* @param[in] base GEMAC base address ++* @param[in] wol_conf WoL register configuration ++*/ ++void gemac_set_wol(void *base, u32 wol_conf) ++{ ++ printk("%s() TODO\n", __func__); ++} ++ ++/** Sets Gemac bus width to 64bit ++ * @param[in] base GEMAC base address ++ * @param[in] width gemac bus width to be set possible values are 32/64/128 ++ * */ ++void gemac_set_bus_width(void *base, int width) ++{ ++} ++ ++/** Sets Gemac configuration. ++* @param[in] base GEMAC base address ++* @param[in] cfg GEMAC configuration ++*/ ++void gemac_set_config(void *base, GEMAC_CFG *cfg) ++{ ++ ++ /*GEMAC config taken from VLSI */ ++ writel(0x00000004, base + EMAC_TFWR_STR_FWD); ++ writel(0x00000005, base + EMAC_RX_SECTIOM_FULL); ++ writel(0x00003fff, base + EMAC_TRUNC_FL); ++ writel(0x00000030, base + EMAC_TX_SECTION_EMPTY); ++ writel(0x00000000, base + EMAC_MIB_CTRL_STS_REG); ++ ++ gemac_set_mode(base, cfg->mode); ++ ++ gemac_set_speed(base, cfg->speed); ++ ++ gemac_set_duplex(base,cfg->duplex); ++} ++ ++ ++#endif //CONFIG_PLATFORM_LS1012A) ++ ++ ++ ++/**************************** GPI ***************************/ ++ ++/** Initializes a GPI block. ++* @param[in] base GPI base address ++* @param[in] cfg GPI configuration ++*/ ++void gpi_init(void *base, GPI_CFG *cfg) ++{ ++ gpi_reset(base); ++ ++ gpi_disable(base); ++ ++ gpi_set_config(base, cfg); ++} ++ ++/** Resets a GPI block. ++* @param[in] base GPI base address ++*/ ++void gpi_reset(void *base) ++{ ++ writel (CORE_SW_RESET, base + GPI_CTRL); ++} ++ ++/** Enables a GPI block. ++* @param[in] base GPI base address ++*/ ++void gpi_enable(void *base) ++{ ++ writel (CORE_ENABLE, base + GPI_CTRL); ++} ++ ++/** Disables a GPI block. ++* @param[in] base GPI base address ++*/ ++void gpi_disable(void *base) ++{ ++ writel (CORE_DISABLE, base + GPI_CTRL); ++} ++ ++ ++/** Sets the configuration of a GPI block. ++* @param[in] base GPI base address ++* @param[in] cfg GPI configuration ++*/ ++void gpi_set_config(void *base, GPI_CFG *cfg) ++{ ++ writel (CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL), base + GPI_LMEM_ALLOC_ADDR); ++ writel (CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_FREE_CTRL), base + GPI_LMEM_FREE_ADDR); ++ writel (CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_ALLOC_CTRL), base + GPI_DDR_ALLOC_ADDR); ++ writel (CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL), base + GPI_DDR_FREE_ADDR); ++ writel (CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR), base + GPI_CLASS_ADDR); ++ writel (DDR_HDR_SIZE, base + GPI_DDR_DATA_OFFSET); ++ writel (LMEM_HDR_SIZE, base + GPI_LMEM_DATA_OFFSET); ++ writel (0, base + GPI_LMEM_SEC_BUF_DATA_OFFSET); ++ writel (0, base + GPI_DDR_SEC_BUF_DATA_OFFSET); ++ writel ((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE, base + GPI_HDR_SIZE); ++ writel ((DDR_BUF_SIZE << 16) | LMEM_BUF_SIZE, base + GPI_BUF_SIZE); ++ ++ writel (((cfg->lmem_rtry_cnt << 16) | (GPI_DDR_BUF_EN << 1) | GPI_LMEM_BUF_EN), base + GPI_RX_CONFIG); ++ writel (cfg->tmlf_txthres, base + GPI_TMLF_TX); ++ writel (cfg->aseq_len, base + GPI_DTX_ASEQ); ++ writel (1, base + GPI_TOE_CHKSUM_EN); ++} ++ ++/**************************** CLASSIFIER ***************************/ ++ ++/** Initializes CLASSIFIER block. ++* @param[in] cfg CLASSIFIER configuration ++*/ ++void class_init(CLASS_CFG *cfg) ++{ ++ class_reset(); ++ ++ class_disable(); ++ ++ class_set_config(cfg); ++} ++ ++/** Resets CLASSIFIER block. ++* ++*/ ++void class_reset(void) ++{ ++ writel(CORE_SW_RESET, CLASS_TX_CTRL); ++} ++ ++/** Enables all CLASS-PE's cores. ++* ++*/ ++void class_enable(void) ++{ ++ writel(CORE_ENABLE, CLASS_TX_CTRL); ++} ++ ++/** Disables all CLASS-PE's cores. ++* ++*/ ++void class_disable(void) ++{ ++ writel(CORE_DISABLE, CLASS_TX_CTRL); ++} ++ ++/** Sets the configuration of the CLASSIFIER block. ++* @param[in] cfg CLASSIFIER configuration ++*/ ++void class_set_config(CLASS_CFG *cfg) ++{ ++ u32 val; ++ ++ /* Initialize route table */ ++ if (!cfg->resume) ++ memset(DDR_PHYS_TO_VIRT(cfg->route_table_baseaddr), 0, (1 << cfg->route_table_hash_bits) * CLASS_ROUTE_SIZE); ++ ++#if !defined(LS1012A_PFE_RESET_WA) ++ writel(cfg->pe_sys_clk_ratio, CLASS_PE_SYS_CLK_RATIO); ++#endif ++ ++ writel((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE, CLASS_HDR_SIZE); ++ writel(LMEM_BUF_SIZE, CLASS_LMEM_BUF_SIZE); ++ writel(CLASS_ROUTE_ENTRY_SIZE(CLASS_ROUTE_SIZE) | CLASS_ROUTE_HASH_SIZE(cfg->route_table_hash_bits), CLASS_ROUTE_HASH_ENTRY_SIZE); ++ writel(HIF_PKT_CLASS_EN| HIF_PKT_OFFSET(sizeof(struct hif_hdr)), CLASS_HIF_PARSE); ++ ++ val = HASH_CRC_PORT_IP | QB2BUS_LE; ++ ++#if defined(CONFIG_IP_ALIGNED) ++ val |= IP_ALIGNED; ++#endif ++ ++ /* Class PE packet steering will only work if TOE mode, bridge fetch or ++ * route fetch are enabled (see class/qb_fet.v). Route fetch would trigger ++ * additional memory copies (likely from DDR because of hash table size, which ++ * cannot be reduced because PE software still relies on hash value computed ++ * in HW), so when not in TOE mode we simply enable HW bridge fetch even ++ * though we don't use it. ++ */ ++ if (cfg->toe_mode) ++ val |= CLASS_TOE; ++ else ++ val |= HW_BRIDGE_FETCH; ++ ++ writel(val, CLASS_ROUTE_MULTI); ++ ++ writel(DDR_PHYS_TO_PFE(cfg->route_table_baseaddr), CLASS_ROUTE_TABLE_BASE); ++ writel(CLASS_PE0_RO_DM_ADDR0_VAL, CLASS_PE0_RO_DM_ADDR0); ++ writel(CLASS_PE0_RO_DM_ADDR1_VAL, CLASS_PE0_RO_DM_ADDR1); ++ writel(CLASS_PE0_QB_DM_ADDR0_VAL, CLASS_PE0_QB_DM_ADDR0); ++ writel(CLASS_PE0_QB_DM_ADDR1_VAL, CLASS_PE0_QB_DM_ADDR1); ++ writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR), CLASS_TM_INQ_ADDR); ++ ++ writel(23, CLASS_AFULL_THRES); ++ writel(23, CLASS_TSQ_FIFO_THRES); ++ ++ writel(24, CLASS_MAX_BUF_CNT); ++ writel(24, CLASS_TSQ_MAX_CNT); ++} ++ ++/**************************** TMU ***************************/ ++ ++void tmu_reset(void) ++{ ++ writel(SW_RESET, TMU_CTRL); ++} ++ ++/** Initializes TMU block. ++* @param[in] cfg TMU configuration ++*/ ++void tmu_init(TMU_CFG *cfg) ++{ ++ int q, phyno; ++ ++ tmu_disable(0xF); ++ mdelay(10); ++ ++#if !defined(LS1012A_PFE_RESET_WA) ++ /* keep in soft reset */ ++ writel(SW_RESET, TMU_CTRL); ++#endif ++ writel(0x3, TMU_SYS_GENERIC_CONTROL); ++ writel(750, TMU_INQ_WATERMARK); ++ writel(CBUS_VIRT_TO_PFE(EGPI1_BASE_ADDR + GPI_INQ_PKTPTR), TMU_PHY0_INQ_ADDR); ++ writel(CBUS_VIRT_TO_PFE(EGPI2_BASE_ADDR + GPI_INQ_PKTPTR), TMU_PHY1_INQ_ADDR); ++#if !defined(CONFIG_PLATFORM_LS1012A) ++ writel(CBUS_VIRT_TO_PFE(EGPI3_BASE_ADDR + GPI_INQ_PKTPTR), TMU_PHY2_INQ_ADDR); ++#endif ++ writel(CBUS_VIRT_TO_PFE(HGPI_BASE_ADDR + GPI_INQ_PKTPTR), TMU_PHY3_INQ_ADDR); ++ writel(CBUS_VIRT_TO_PFE(HIF_NOCPY_RX_INQ0_PKTPTR), TMU_PHY4_INQ_ADDR); ++ writel(CBUS_VIRT_TO_PFE(UTIL_INQ_PKTPTR), TMU_PHY5_INQ_ADDR); ++ writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL), TMU_BMU_INQ_ADDR); ++ ++ writel(0x3FF, TMU_TDQ0_SCH_CTRL); // enabling all 10 schedulers [9:0] of each TDQ ++ writel(0x3FF, TMU_TDQ1_SCH_CTRL); ++#if !defined(CONFIG_PLATFORM_LS1012A) ++ writel(0x3FF, TMU_TDQ2_SCH_CTRL); ++#endif ++ writel(0x3FF, TMU_TDQ3_SCH_CTRL); ++ ++#if !defined(LS1012A_PFE_RESET_WA) ++ writel(cfg->pe_sys_clk_ratio, TMU_PE_SYS_CLK_RATIO); ++#endif ++ ++#if !defined(LS1012A_PFE_RESET_WA) ++ writel(DDR_PHYS_TO_PFE(cfg->llm_base_addr), TMU_LLM_BASE_ADDR); // Extra packet pointers will be stored from this address onwards ++ ++ writel(cfg->llm_queue_len, TMU_LLM_QUE_LEN); ++ writel(5, TMU_TDQ_IIFG_CFG); ++ writel(DDR_BUF_SIZE, TMU_BMU_BUF_SIZE); ++ ++ writel(0x0, TMU_CTRL); ++ ++ /* MEM init */ ++ printk(KERN_INFO "%s: mem init\n", __func__); ++ writel(MEM_INIT, TMU_CTRL); ++ ++ while(!(readl(TMU_CTRL) & MEM_INIT_DONE)) ; ++ ++ /* LLM init */ ++ printk(KERN_INFO "%s: lmem init\n", __func__); ++ writel(LLM_INIT, TMU_CTRL); ++ ++ while(!(readl(TMU_CTRL) & LLM_INIT_DONE)) ; ++#endif ++ // set up each queue for tail drop ++ for (phyno = 0; phyno < 4; phyno++) ++ { ++#if defined(CONFIG_PLATFORM_LS1012A) ++ if(phyno == 2) continue; ++#endif ++ for (q = 0; q < 16; q++) ++ { ++ u32 qdepth; ++ writel((phyno << 8) | q, TMU_TEQ_CTRL); ++ writel(1 << 22, TMU_TEQ_QCFG); //Enable tail drop ++ ++ if (phyno == 3) ++ qdepth = DEFAULT_TMU3_QDEPTH; ++ else ++ qdepth = (q == 0) ? DEFAULT_Q0_QDEPTH : DEFAULT_MAX_QDEPTH; ++ ++ // LOG: 68855 ++ // The following is a workaround for the reordered packet and BMU2 buffer leakage issue. ++ if (CHIP_REVISION() == 0) ++ qdepth = 31; ++ ++ writel(qdepth << 18, TMU_TEQ_HW_PROB_CFG2); ++ writel(qdepth >> 14, TMU_TEQ_HW_PROB_CFG3); ++ } ++ } ++ ++#ifdef CFG_LRO ++ /* Set TMU-3 queue 5 (LRO) in no-drop mode */ ++ writel((3 << 8) | TMU_QUEUE_LRO, TMU_TEQ_CTRL); ++ writel(0, TMU_TEQ_QCFG); ++#endif ++ ++ writel(0x05, TMU_TEQ_DISABLE_DROPCHK); ++ ++ writel(0x0, TMU_CTRL); ++} ++ ++/** Enables TMU-PE cores. ++* @param[in] pe_mask TMU PE mask ++*/ ++void tmu_enable(u32 pe_mask) ++{ ++ writel(readl(TMU_TX_CTRL) | (pe_mask & 0xF), TMU_TX_CTRL); ++} ++ ++/** Disables TMU cores. ++* @param[in] pe_mask TMU PE mask ++*/ ++void tmu_disable(u32 pe_mask) ++{ ++ writel(readl(TMU_TX_CTRL) & ~(pe_mask & 0xF), TMU_TX_CTRL); ++} ++/** This will return the tmu queue status ++ * @param[in] if_id gem interface id or TMU index ++ * @return returns the bit mask of busy queues, zero means all queues are empty ++ */ ++u32 tmu_qstatus(u32 if_id) ++{ ++ return cpu_to_be32(pe_dmem_read(TMU0_ID+if_id, PESTATUS_ADDR_TMU + offsetof(PE_STATUS, tmu_qstatus), 4)); ++} ++ ++u32 tmu_pkts_processed(u32 if_id) ++{ ++ return cpu_to_be32(pe_dmem_read(TMU0_ID+if_id, PESTATUS_ADDR_TMU + offsetof(PE_STATUS, rx), 4)); ++} ++/**************************** UTIL ***************************/ ++ ++/** Resets UTIL block. ++*/ ++void util_reset(void) ++{ ++ writel(CORE_SW_RESET, UTIL_TX_CTRL); ++} ++ ++/** Initializes UTIL block. ++* @param[in] cfg UTIL configuration ++*/ ++void util_init(UTIL_CFG *cfg) ++{ ++ writel(cfg->pe_sys_clk_ratio, UTIL_PE_SYS_CLK_RATIO); ++} ++ ++/** Enables UTIL-PE core. ++* ++*/ ++void util_enable(void) ++{ ++ writel(CORE_ENABLE, UTIL_TX_CTRL); ++} ++ ++/** Disables UTIL-PE core. ++* ++*/ ++void util_disable(void) ++{ ++ writel(CORE_DISABLE, UTIL_TX_CTRL); ++} ++ ++/**************************** HIF ***************************/ ++ ++/** Initializes HIF no copy block. ++* ++*/ ++void hif_nocpy_init(void) ++{ ++ writel(4, HIF_NOCPY_TX_PORT_NO); ++ writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL), HIF_NOCPY_LMEM_ALLOC_ADDR); ++ writel(CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR), HIF_NOCPY_CLASS_ADDR); ++ writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR), HIF_NOCPY_TMU_PORT0_ADDR); ++ writel(HIF_RX_POLL_CTRL_CYCLE<<16|HIF_TX_POLL_CTRL_CYCLE, HIF_NOCPY_POLL_CTRL); ++} ++ ++/** Enable hif_nocpy tx DMA and interrupt ++* ++*/ ++void hif_nocpy_tx_enable(void) ++{ ++ /*TODO not sure poll_cntrl_en is required or not */ ++ writel( HIF_CTRL_DMA_EN, HIF_NOCPY_TX_CTRL); ++ //writel((readl(HIF_NOCPY_INT_ENABLE) | HIF_INT_EN | HIF_TXPKT_INT_EN), HIF_NOCPY_INT_ENABLE); ++} ++ ++/** Disable hif_nocpy tx DMA and interrupt ++* ++*/ ++void hif_nocpy_tx_disable(void) ++{ ++ u32 hif_int; ++ ++ writel(0, HIF_NOCPY_TX_CTRL); ++ ++ hif_int = readl(HIF_NOCPY_INT_ENABLE); ++ hif_int &= HIF_TXPKT_INT_EN; ++ writel(hif_int, HIF_NOCPY_INT_ENABLE); ++} ++ ++/** Enable hif rx DMA and interrupt ++* ++*/ ++void hif_nocpy_rx_enable(void) ++{ ++ hif_nocpy_rx_dma_start(); ++ writel((readl(HIF_NOCPY_INT_ENABLE) | HIF_INT_EN | HIF_RXPKT_INT_EN), HIF_NOCPY_INT_ENABLE); ++} ++ ++/** Disable hif_nocpy rx DMA and interrupt ++* ++*/ ++void hif_nocpy_rx_disable(void) ++{ ++ u32 hif_int; ++ ++ writel(0, HIF_NOCPY_RX_CTRL); ++ ++ hif_int = readl(HIF_NOCPY_INT_ENABLE); ++ hif_int &= HIF_RXPKT_INT_EN; ++ writel(hif_int, HIF_NOCPY_INT_ENABLE); ++ ++} ++/** Initializes HIF copy block. ++* ++*/ ++void hif_init(void) ++{ ++ /*Initialize HIF registers*/ ++ writel((HIF_RX_POLL_CTRL_CYCLE << 16) | HIF_TX_POLL_CTRL_CYCLE, HIF_POLL_CTRL); ++} ++ ++/** Enable hif tx DMA and interrupt ++* ++*/ ++void hif_tx_enable(void) ++{ ++ /*TODO not sure poll_cntrl_en is required or not */ ++ writel(HIF_CTRL_DMA_EN, HIF_TX_CTRL); ++ writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_TXPKT_INT_EN), HIF_INT_ENABLE); ++} ++ ++/** Disable hif tx DMA and interrupt ++* ++*/ ++void hif_tx_disable(void) ++{ ++ u32 hif_int; ++ ++ writel(0, HIF_TX_CTRL); ++ ++ hif_int = readl(HIF_INT_ENABLE); ++ hif_int &= HIF_TXPKT_INT_EN; ++ writel(hif_int, HIF_INT_ENABLE); ++} ++ ++/** Enable hif rx DMA and interrupt ++* ++*/ ++void hif_rx_enable(void) ++{ ++ hif_rx_dma_start(); ++ writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_RXPKT_INT_EN), HIF_INT_ENABLE); ++} ++ ++/** Disable hif rx DMA and interrupt ++* ++*/ ++void hif_rx_disable(void) ++{ ++ u32 hif_int; ++ ++ writel(0, HIF_RX_CTRL); ++ ++ hif_int = readl(HIF_INT_ENABLE); ++ hif_int &= HIF_RXPKT_INT_EN; ++ writel(hif_int, HIF_INT_ENABLE); ++ ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_hif.c +@@ -0,0 +1,939 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifdef __KERNEL__ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#else ++#include "platform.h" ++#endif ++ ++ ++#include "pfe_mod.h" ++#if 0 ++#define DMA_MAP_SINGLE(dev, vaddr, size, direction) dma_map_single(dev, vaddr, size, direction) ++#define DMA_UNMAP_SINGLE(dev, vaddr, size, direction) dma_unmap_single(dev, vaddr, size, direction) ++void ct_flush(void *addr, u32 size) ++{ ++ dma_map_single(pfe->dev, addr, size, DMA_TO_DEVICE); ++} ++#else ++#define DMA_UNMAP_SINGLE(dev, vaddr, size, direction) ++#define DMA_MAP_SINGLE(dev, vaddr, size, direction) virt_to_phys(vaddr) ++#define ct_flush(addr, sz) ++#endif ++ ++#define HIF_INT_MASK (HIF_INT | HIF_RXPKT_INT) ++ ++#define inc_cl_idx(idxname) idxname = (idxname+1) & (queue->size-1) ++#define inc_hif_rxidx(idxname) idxname = (idxname+1) & (hif->RxRingSize-1) ++#define inc_hif_txidx(idxname) idxname = (idxname+1) & (hif->TxRingSize-1) ++ ++unsigned char napi_first_batch = 0; ++ ++static int pfe_hif_alloc_descr(struct pfe_hif *hif) ++{ ++#if !defined(CONFIG_PLATFORM_PCI) ++ void *addr; ++ dma_addr_t dma_addr; ++ int err = 0; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ addr = dma_alloc_coherent(pfe->dev, ++ HIF_RX_DESC_NT * sizeof(struct hif_desc) + HIF_TX_DESC_NT * sizeof(struct hif_desc), ++ &dma_addr, GFP_KERNEL); ++ ++ if (!addr) { ++ printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n", __func__); ++ err = -ENOMEM; ++ goto err0; ++ } ++ ++ hif->descr_baseaddr_p = dma_addr; ++ hif->descr_baseaddr_v = addr; ++#else ++ hif->descr_baseaddr_p = pfe->ddr_phys_baseaddr + HIF_DESC_BASEADDR; ++ hif->descr_baseaddr_v = pfe->ddr_baseaddr + HIF_DESC_BASEADDR; ++#endif ++ hif->RxRingSize = HIF_RX_DESC_NT; ++ hif->TxRingSize = HIF_TX_DESC_NT; ++ ++ return 0; ++ ++err0: ++ return err; ++} ++ ++static void pfe_hif_free_descr(struct pfe_hif *hif) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++#if !defined(CONFIG_PLATFORM_PCI) ++ dma_free_coherent(pfe->dev, ++ hif->RxRingSize * sizeof(struct hif_desc) + hif->TxRingSize * sizeof(struct hif_desc), ++ hif->descr_baseaddr_v, hif->descr_baseaddr_p); ++#endif ++} ++void pfe_hif_desc_dump(struct pfe_hif *hif) ++{ ++ struct hif_desc *desc; ++ unsigned long desc_p; ++ int ii=0; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ desc = hif->RxBase; ++ desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v + hif->descr_baseaddr_p); ++ ++ printk("HIF Rx desc base %p physical %x\n", desc, (u32)desc_p); ++ for (ii = 0; ii < hif->RxRingSize; ii++) { ++ printk(KERN_INFO "status: %08x, ctrl: %08x, data: %08x, next: %x\n", ++ desc->status, desc->ctrl, desc->data, desc->next); ++ desc++; ++ } ++ ++ desc = hif->TxBase; ++ desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v + hif->descr_baseaddr_p); ++ ++ printk("HIF Tx desc base %p physical %x\n", desc, (u32)desc_p); ++ for (ii = 0; ii < hif->TxRingSize; ii++) { ++ printk(KERN_INFO "status: %08x, ctrl: %08x, data: %08x, next: %x\n", ++ desc->status, desc->ctrl, desc->data, desc->next); ++ desc++; ++ } ++ ++} ++ ++/* pfe_hif_release_buffers ++ * ++ */ ++static void pfe_hif_release_buffers(struct pfe_hif *hif) ++{ ++ struct hif_desc *desc; ++ int i = 0; ++ ++ hif->RxBase = hif->descr_baseaddr_v; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ /*Free Rx buffers */ ++#if !defined(CONFIG_PLATFORM_PCI) ++ desc = hif->RxBase; ++ for (i = 0; i < hif->RxRingSize; i++) { ++ if (desc->data) { ++ if ((i < hif->shm->rx_buf_pool_cnt) && (hif->shm->rx_buf_pool[i] == NULL)) { ++ //dma_unmap_single(hif->dev, desc->data, hif->rx_buf_len[i], DMA_FROM_DEVICE); ++ DMA_UNMAP_SINGLE(hif->dev, desc->data, hif->rx_buf_len[i], DMA_FROM_DEVICE); ++ hif->shm->rx_buf_pool[i] = hif->rx_buf_addr[i]; ++ } ++ else { ++ /*TODO This should not happen*/ ++ printk(KERN_ERR "%s: buffer pool already full\n", __func__); ++ } ++ } ++ ++ desc->data = 0; ++ desc->status = 0; ++ desc->ctrl = 0; ++ desc++; ++ } ++#endif ++} ++ ++ ++/* ++ * pfe_hif_init_buffers ++ * This function initializes the HIF Rx/Tx ring descriptors and ++ * initialize Rx queue with buffers. ++ */ ++static int pfe_hif_init_buffers(struct pfe_hif *hif) ++{ ++ struct hif_desc *desc, *first_desc_p; ++ u32 data; ++ int i = 0; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ /* Check enough Rx buffers available in the shared memory */ ++ if (hif->shm->rx_buf_pool_cnt < hif->RxRingSize) ++ return -ENOMEM; ++ ++ hif->RxBase = hif->descr_baseaddr_v; ++ memset(hif->RxBase, 0, hif->RxRingSize * sizeof(struct hif_desc)); ++ ++ /*Initialize Rx descriptors */ ++ desc = hif->RxBase; ++ first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p; ++ ++ for (i = 0; i < hif->RxRingSize; i++) { ++ /* Initialize Rx buffers from the shared memory */ ++ ++#if defined(CONFIG_PLATFORM_PCI) ++ data = pfe->ddr_phys_baseaddr + HIF_RX_PKT_DDR_BASEADDR + i * DDR_BUF_SIZE; ++#else ++ data = (u32)DMA_MAP_SINGLE(hif->dev, hif->shm->rx_buf_pool[i], pfe_pkt_size, DMA_FROM_DEVICE); ++ hif->rx_buf_addr[i] = hif->shm->rx_buf_pool[i]; ++ hif->rx_buf_len[i] = pfe_pkt_size; ++ // printk("#%d %p %p %d\n", i, data, hif->rx_buf_addr[i], hif->rx_buf_len[i]); ++ hif->shm->rx_buf_pool[i] = NULL; ++#endif ++ if (likely(dma_mapping_error(hif->dev, data) == 0)) { ++ desc->data = DDR_PHYS_TO_PFE(data); ++ } else { ++ printk(KERN_ERR "%s : low on mem\n", __func__); ++ ++ goto err; ++ } ++ ++ desc->status = 0; ++ wmb(); ++ desc->ctrl = BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM | BD_CTRL_DIR | ++ BD_CTRL_DESC_EN | BD_BUF_LEN(pfe_pkt_size); ++ /* Chain descriptors */ ++ desc->next = (u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1); ++ desc++; ++ } ++ ++ /* Overwrite last descriptor to chain it to first one*/ ++ desc--; ++ desc->next = (u32)DDR_PHYS_TO_PFE(first_desc_p); ++ ++ hif->RxtocleanIndex = 0; ++ ++ /*Initialize Rx buffer descriptor ring base address */ ++ writel(DDR_PHYS_TO_PFE(hif->descr_baseaddr_p), HIF_RX_BDP_ADDR); ++ ++ hif->TxBase = hif->RxBase + hif->RxRingSize; ++ first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p + hif->RxRingSize; ++ memset(hif->TxBase, 0, hif->TxRingSize * sizeof(struct hif_desc)); ++ ++ /*Initialize tx descriptors */ ++ desc = hif->TxBase; ++ ++ for (i = 0; i < hif->TxRingSize; i++) { ++ /* Chain descriptors */ ++ desc->next = (u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1); ++#if defined(CONFIG_PLATFORM_PCI) ++ desc->data = pfe->ddr_phys_baseaddr + HIF_TX_PKT_DDR_BASEADDR + i * DDR_BUF_SIZE; ++#endif ++ desc->ctrl = 0; ++ desc++; ++ } ++ ++ /* Overwrite last descriptor to chain it to first one */ ++ desc--; ++ desc->next = (u32)DDR_PHYS_TO_PFE(first_desc_p); ++ hif->TxAvail = hif->TxRingSize; ++ hif->Txtosend = 0; ++ hif->Txtoclean = 0; ++ hif->Txtoflush = 0; ++ ++ /*Initialize Tx buffer descriptor ring base address */ ++ writel((u32)DDR_PHYS_TO_PFE(first_desc_p), HIF_TX_BDP_ADDR); ++ ++ return 0; ++ ++err: ++ pfe_hif_release_buffers(hif); ++ return -ENOMEM; ++} ++ ++/* pfe_hif_client_register ++ * ++ * This function used to register a client driver with the HIF driver. ++ * ++ * Return value: ++ * 0 - on Successful registration ++ */ ++static int pfe_hif_client_register(struct pfe_hif *hif, u32 client_id, struct hif_client_shm *client_shm) ++{ ++ struct hif_client *client = &hif->client[client_id]; ++ u32 i, cnt; ++ struct rx_queue_desc *rx_qbase; ++ struct tx_queue_desc *tx_qbase; ++ struct hif_rx_queue *rx_queue; ++ struct hif_tx_queue *tx_queue; ++ int err = 0; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ spin_lock_bh(&hif->tx_lock); ++ ++ if (test_bit(client_id, &hif->shm->gClient_status[0])) { ++ printk(KERN_ERR "%s: client %d already registered\n", __func__, client_id); ++ err = -1; ++ goto unlock; ++ } ++ ++ memset(client, 0, sizeof(struct hif_client)); ++ ++ /*Initialize client Rx queues baseaddr, size */ ++ ++ cnt = CLIENT_CTRL_RX_Q_CNT(client_shm->ctrl); ++ /*Check if client is requesting for more queues than supported */ ++ if (cnt > HIF_CLIENT_QUEUES_MAX) ++ cnt = HIF_CLIENT_QUEUES_MAX; ++ ++ client->rx_qn = cnt; ++ rx_qbase = (struct rx_queue_desc *)client_shm->rx_qbase; ++ for (i = 0; i < cnt; i++) ++ { ++ rx_queue = &client->rx_q[i]; ++ rx_queue->base = rx_qbase + i * client_shm->rx_qsize; ++ rx_queue->size = client_shm->rx_qsize; ++ rx_queue->write_idx = 0; ++ } ++ ++ /*Initialize client Tx queues baseaddr, size */ ++ cnt = CLIENT_CTRL_TX_Q_CNT(client_shm->ctrl); ++ ++ /*Check if client is requesting for more queues than supported */ ++ if (cnt > HIF_CLIENT_QUEUES_MAX) ++ cnt = HIF_CLIENT_QUEUES_MAX; ++ ++ client->tx_qn = cnt; ++ tx_qbase = (struct tx_queue_desc *)client_shm->tx_qbase; ++ for (i = 0; i < cnt; i++) ++ { ++ tx_queue = &client->tx_q[i]; ++ tx_queue->base = tx_qbase + i * client_shm->tx_qsize; ++ tx_queue->size = client_shm->tx_qsize; ++ tx_queue->ack_idx = 0; ++ } ++ ++ set_bit(client_id, &hif->shm->gClient_status[0]); ++ ++unlock: ++ spin_unlock_bh(&hif->tx_lock); ++ ++ return err; ++} ++ ++ ++/* pfe_hif_client_unregister ++ * ++ * This function used to unregister a client from the HIF driver. ++ * ++ */ ++static void pfe_hif_client_unregister(struct pfe_hif *hif, u32 client_id) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ /* Mark client as no longer available (which prevents further packet receive for this client) */ ++ spin_lock_bh(&hif->tx_lock); ++ ++ if (!test_bit(client_id, &hif->shm->gClient_status[0])) { ++ printk(KERN_ERR "%s: client %d not registered\n", __func__, client_id); ++ ++ spin_unlock_bh(&hif->tx_lock); ++ return; ++ } ++ ++ clear_bit(client_id, &hif->shm->gClient_status[0]); ++ ++ spin_unlock_bh(&hif->tx_lock); ++} ++ ++/* client_put_rxpacket- ++ * This functions puts the Rx pkt in the given client Rx queue. ++ * It actually swap the Rx pkt in the client Rx descriptor buffer ++ * and returns the free buffer from it. ++ * ++ * If the funtion returns NULL means client Rx queue is full and ++ * packet couldn't send to client queue. ++ */ ++static void *client_put_rxpacket(struct hif_rx_queue *queue, void *pkt, u32 len, u32 flags, u32 client_ctrl, u32 *rem_len) ++{ ++ void *free_pkt = NULL; ++ struct rx_queue_desc *desc = queue->base + queue->write_idx; ++ ++ if (desc->ctrl & CL_DESC_OWN) { ++#if defined(CONFIG_PLATFORM_PCI) ++ memcpy(desc->data, pkt, len); ++ free_pkt = PFE_HOST_TO_PCI(pkt); ++ smp_wmb(); ++ desc->ctrl = CL_DESC_BUF_LEN(len) | flags; ++ inc_cl_idx(queue->write_idx); ++#else ++ //TODO: move allocations after Rx loop to improve instruction cache locality ++ if (page_mode) { ++ int rem_page_size = PAGE_SIZE - PRESENT_OFST_IN_PAGE(pkt); ++ int cur_pkt_size = ROUND_MIN_RX_SIZE(len + pfe_pkt_headroom); ++ *rem_len = (rem_page_size - cur_pkt_size); ++ //printk("%p rem_len %d cur_len %d buf_len %d\n", pkt, rem_page_size, cur_pkt_size, *rem_len); ++ if (*rem_len) ++ { ++ free_pkt = pkt + cur_pkt_size; ++ get_page(virt_to_page(free_pkt)); ++ } else { ++ free_pkt = (void *)__get_free_page(GFP_ATOMIC | GFP_DMA_PFE); ++ *rem_len = pfe_pkt_size; ++ } ++ } else { ++ free_pkt = kmalloc(PFE_BUF_SIZE, GFP_ATOMIC | GFP_DMA_PFE); ++ *rem_len = PFE_BUF_SIZE - pfe_pkt_headroom; ++ } ++ ++ if (free_pkt) { ++ desc->data = pkt; ++ desc->client_ctrl = client_ctrl; ++ smp_wmb(); ++ desc->ctrl = CL_DESC_BUF_LEN(len) | flags; ++ inc_cl_idx(queue->write_idx); ++ free_pkt += pfe_pkt_headroom; ++ } ++#endif ++ } ++ ++ return free_pkt; ++} ++ ++ ++/* pfe_hif_rx_process- ++ * This function does pfe hif rx queue processing. ++ * Dequeue packet from Rx queue and send it to corresponding client queue ++ */ ++static int pfe_hif_rx_process(struct pfe_hif *hif, int budget) ++{ ++ struct hif_desc *desc; ++ struct hif_hdr *pkt_hdr; ++ struct __hif_hdr hif_hdr; ++ void *free_buf; ++ int rtc, len, rx_processed = 0; ++ struct __hif_desc local_desc; ++ int flags; ++ unsigned int desc_p; ++ unsigned int buf_size = 0; ++ ++ spin_lock_bh(&hif->lock); ++ ++ rtc = hif->RxtocleanIndex; ++ ++ while (rx_processed < budget) ++ { ++ /*TODO may need to implement rx process budget */ ++ desc = hif->RxBase + rtc; ++ ++ __memcpy12(&local_desc, desc); ++ ++ /* ACK pending Rx interrupt */ ++ if (local_desc.ctrl & BD_CTRL_DESC_EN) { ++ writel(HIF_INT_MASK, HIF_INT_SRC); ++ ++ if(rx_processed == 0) ++ { ++ if(napi_first_batch == 1) ++ { ++ desc_p = hif->descr_baseaddr_p + ((unsigned long int)(desc) - (unsigned long int)hif->descr_baseaddr_v); ++#if defined(CONFIG_PLATFORM_C2000) ++ outer_inv_range(desc_p, (desc_p + 16)); ++#endif ++ napi_first_batch = 0; ++ } ++ } ++ ++ __memcpy12(&local_desc, desc); ++ ++ if (local_desc.ctrl & BD_CTRL_DESC_EN) ++ break; ++ } ++ ++ napi_first_batch = 0; ++ ++#ifdef HIF_NAPI_STATS ++ hif->napi_counters[NAPI_DESC_COUNT]++; ++#endif ++ len = BD_BUF_LEN(local_desc.ctrl); ++#if defined(CONFIG_PLATFORM_PCI) ++ pkt_hdr = &hif_hdr; ++ memcpy(pkt_hdr, (void *)PFE_PCI_TO_HOST(local_desc.data), sizeof(struct hif_hdr)); ++#else ++ //dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data), hif->rx_buf_len[rtc], DMA_FROM_DEVICE); ++ DMA_UNMAP_SINGLE(hif->dev, DDR_PFE_TO_PHYS(local_desc.data), hif->rx_buf_len[rtc], DMA_FROM_DEVICE); ++ ++ pkt_hdr = (struct hif_hdr *)hif->rx_buf_addr[rtc]; ++ ++ /* Track last HIF header received */ ++ if (!hif->started) { ++ hif->started = 1; ++ ++ __memcpy8(&hif_hdr, pkt_hdr); ++ ++ hif->qno = hif_hdr.hdr.qNo; ++ hif->client_id = hif_hdr.hdr.client_id; ++ hif->client_ctrl = (hif_hdr.hdr.client_ctrl1 << 16) | hif_hdr.hdr.client_ctrl; ++ flags = CL_DESC_FIRST; ++ ++// printk(KERN_INFO "start of packet: id %d, q %d, len %d, flags %x %x\n", hif->client_id, hif->qno, len, local_desc.ctrl, hif->client_ctrl); ++ } ++ else { ++// printk(KERN_INFO "continuation: id %d, q %d, len %d, flags %x\n", hif->client_id, hif->qno, len, local_desc.ctrl); ++ flags = 0; ++ } ++ ++ if (local_desc.ctrl & BD_CTRL_LIFM) ++ flags |= CL_DESC_LAST; ++#endif ++ /* Check for valid client id and still registered */ ++ if ((hif->client_id >= HIF_CLIENTS_MAX) || !(test_bit(hif->client_id, &hif->shm->gClient_status[0]))) { ++ if (printk_ratelimit()) ++ printk(KERN_ERR "%s: packet with invalid client id %d qNo %d\n", __func__, hif->client_id, hif->qno); ++ ++#if defined(CONFIG_PLATFORM_PCI) ++ free_buf = local_desc.data; ++#else ++ free_buf = pkt_hdr; ++#endif ++ goto pkt_drop; ++ } ++ ++ /* Check to valid queue number */ ++ if (hif->client[hif->client_id].rx_qn <= hif->qno) { ++ printk(KERN_INFO "%s: packet with invalid queue: %d\n", __func__, hif->qno); ++ hif->qno = 0; ++ } ++ ++#if defined(CONFIG_PLATFORM_PCI) ++ free_buf = client_put_rxpacket(&hif->client[hif->client_id].rx_q[hif->qno], ++ (void *)PFE_PCI_TO_HOST(desc->data), len, flags, hif->client_ctrl, &buf_zize); ++#else ++ free_buf = client_put_rxpacket(&hif->client[hif->client_id].rx_q[hif->qno], ++ (void *)pkt_hdr, len, flags, hif->client_ctrl, &buf_size); ++#endif ++ ++ hif_lib_indicate_client(hif->client_id, EVENT_RX_PKT_IND, hif->qno); ++ ++ if (unlikely(!free_buf)) { ++#ifdef HIF_NAPI_STATS ++ hif->napi_counters[NAPI_CLIENT_FULL_COUNT]++; ++#endif ++ /* If we want to keep in polling mode to retry later, we need to tell napi that we consumed ++ the full budget or we will hit a livelock scenario. The core code keeps this napi instance ++ at the head of the list and none of the other instances get to run */ ++ rx_processed = budget; ++ ++ if (flags & CL_DESC_FIRST) ++ hif->started = 0; ++ ++ break; ++ } ++ ++ pkt_drop: ++#if defined(CONFIG_PLATFORM_PCI) ++ desc->data = (u32)free_buf; ++#else ++ /*Fill free buffer in the descriptor */ ++ hif->rx_buf_addr[rtc] = free_buf; ++ hif->rx_buf_len[rtc] = min(pfe_pkt_size, buf_size); ++ desc->data = DDR_PHYS_TO_PFE((u32)DMA_MAP_SINGLE(hif->dev, free_buf, hif->rx_buf_len[rtc], DMA_FROM_DEVICE)); ++ //printk("#%p %p %d\n", desc->data, hif->rx_buf_addr[rtc], hif->rx_buf_len[rtc]); ++#endif ++ wmb(); ++ desc->ctrl = BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM | BD_CTRL_DIR | ++ BD_CTRL_DESC_EN | BD_BUF_LEN(hif->rx_buf_len[rtc]); ++ ++ inc_hif_rxidx(rtc); ++ ++ if (local_desc.ctrl & BD_CTRL_LIFM) { ++ if (!(hif->client_ctrl & HIF_CTRL_RX_CONTINUED)) { ++ rx_processed++; ++ ++#ifdef HIF_NAPI_STATS ++ hif->napi_counters[NAPI_PACKET_COUNT]++; ++#endif ++ } ++ hif->started = 0; ++ } ++ } ++ ++ hif->RxtocleanIndex = rtc; ++ spin_unlock_bh(&hif->lock); ++ ++ /* we made some progress, re-start rx dma in case it stopped */ ++ hif_rx_dma_start(); ++ ++ return rx_processed; ++} ++ ++ ++/* client_ack_txpacket- ++ * This function ack the Tx packet in the give client Tx queue by resetting ++ * ownership bit in the descriptor. ++ */ ++static int client_ack_txpacket(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no) ++{ ++ struct hif_tx_queue *queue = &hif->client[client_id].tx_q[q_no]; ++ struct tx_queue_desc *desc = queue->base + queue->ack_idx; ++ ++ if (desc->ctrl & CL_DESC_OWN) { ++ /*TODO Do we need to match the pkt address also? */ ++ desc->ctrl &= ~CL_DESC_OWN; ++ inc_cl_idx(queue->ack_idx); ++ ++ return 0; ++ } ++ else { ++ /*This should not happen */ ++ printk(KERN_ERR "%s: %d %d %d %d %d %p %d\n", __func__, hif->Txtosend, hif->Txtoclean, hif->TxAvail, client_id, q_no, queue, queue->ack_idx); ++ BUG(); ++ return 1; ++ } ++} ++ ++void __hif_tx_done_process(struct pfe_hif *hif, int count) ++{ ++ struct hif_desc *desc; ++ struct hif_desc_sw *desc_sw; ++ int ttc, tx_avl; ++ ++ ttc = hif->Txtoclean; ++ tx_avl = hif->TxAvail; ++ ++ while ((tx_avl < hif->TxRingSize) && count--) { ++ desc = hif->TxBase + ttc; ++ ++ if (desc->ctrl & BD_CTRL_DESC_EN) ++ break; ++ ++ desc_sw = &hif->tx_sw_queue[ttc]; ++ ++ if (desc_sw->data) { ++#if !defined(CONFIG_PLATFORM_PCI) ++ //dmap_unmap_single(hif->dev, desc_sw->data, desc_sw->len, DMA_TO_DEVICE); ++ DMA_UNMAP_SINGLE(hif->dev, desc_sw->data, desc_sw->len, DMA_TO_DEVICE); ++#endif ++ } ++ client_ack_txpacket(hif, desc_sw->client_id, desc_sw->q_no); ++ ++ inc_hif_txidx(ttc); ++ tx_avl++; ++ } ++ ++ hif->Txtoclean = ttc; ++ hif->TxAvail = tx_avl; ++} ++ ++ ++/* __hif_xmit_pkt - ++ * This function puts one packet in the HIF Tx queue ++ */ ++void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no, void *data, u32 len, unsigned int flags) ++{ ++ struct hif_desc *desc; ++ struct hif_desc_sw *desc_sw; ++ ++#if defined(CONFIG_PLATFORM_EMULATION) ++ { ++ struct hif_queue *queue = &hif->client[client_id].rx_q[0]; ++ struct queue_desc *qdesc = queue->base + queue->write_idx; ++ void *buf; ++ ++ printk("%s: packet loop backed client_id:%d qno:%d data : %p len:%d\n", __func__, client_id, q_no, data, len); ++#if 1 ++ if (qdesc->ctrl & CL_DESC_OWN) { ++ buf = (void *)qdesc->data; ++ memcpy(buf, data, len); ++ wmb(); ++ qdesc->ctrl = CL_DESC_BUF_LEN(len); ++ inc_cl_idx(queue->write_idx); ++ printk("%s: packet loop backed..\n", __func__); ++ hif_lib_indicate_client(client_id, EVENT_RX_PKT_IND, q_no); ++ client_ack_txpacket(&hif->client[client_id].tx_q[q_no]); ++ } ++#endif ++ } ++ ++#else ++ desc = hif->TxBase + hif->Txtosend; ++ desc_sw = &hif->tx_sw_queue[hif->Txtosend]; ++ ++ desc_sw->len = len; ++ desc_sw->client_id = client_id; ++ desc_sw->q_no = q_no; ++ desc_sw->flags = flags; ++ ++#if !defined(CONFIG_PLATFORM_PCI) ++ if (flags & HIF_DONT_DMA_MAP) { ++ desc_sw->data = 0; ++ desc->data = (u32)DDR_PHYS_TO_PFE(data); ++ } else { ++ desc_sw->data = DMA_MAP_SINGLE(hif->dev, data, len, DMA_TO_DEVICE); ++ desc->data = (u32)DDR_PHYS_TO_PFE(desc_sw->data); ++ } ++#else ++#define ALIGN32(x) ((x) & ~0x3) ++ memcpy(PFE_PCI_TO_HOST(desc->data), data, ALIGN32(len+0x3)); ++#endif ++ ++ inc_hif_txidx(hif->Txtosend); ++ hif->TxAvail--; ++ ++ /* For TSO we skip actual TX until the last descriptor */ ++ /* This reduce the number of required wmb() */ ++ if ((flags & HIF_TSO) && (!((flags & HIF_DATA_VALID) && (flags & HIF_LAST_BUFFER)))) ++ goto skip_tx; ++ ++ wmb(); ++ ++ do { ++ desc_sw = &hif->tx_sw_queue[hif->Txtoflush]; ++ desc = hif->TxBase + hif->Txtoflush; ++ ++ if (desc_sw->flags & HIF_LAST_BUFFER) { ++ if ((desc_sw->client_id < PFE_CL_VWD0) || (desc_sw->client_id > (PFE_CL_VWD0 + MAX_VAP_SUPPORT))) ++ desc->ctrl = BD_CTRL_LIFM | BD_CTRL_BRFETCH_DISABLE | ++ BD_CTRL_RTFETCH_DISABLE | BD_CTRL_PARSE_DISABLE | ++ BD_CTRL_DESC_EN | BD_BUF_LEN(desc_sw->len); ++ else { ++ ++ desc->ctrl = BD_CTRL_LIFM | BD_CTRL_DESC_EN | BD_BUF_LEN(desc_sw->len); ++ } ++ } ++ else ++ desc->ctrl = BD_CTRL_DESC_EN | BD_BUF_LEN(desc_sw->len); ++ ++ inc_hif_txidx(hif->Txtoflush); ++ } ++ while (hif->Txtoflush != hif->Txtosend); ++ ++skip_tx: ++ return; ++ ++#endif ++} ++ ++ ++int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no, void *data, unsigned int len) ++{ ++ int rc = 0; ++ ++ spin_lock_bh(&hif->tx_lock); ++ ++ if (!hif->TxAvail) ++ rc = 1; ++ else { ++ __hif_xmit_pkt(hif, client_id, q_no, data, len, HIF_FIRST_BUFFER | HIF_LAST_BUFFER); ++ hif_tx_dma_start(); ++ } ++ if (hif->TxAvail < (hif->TxRingSize >> 1)) ++ __hif_tx_done_process(hif, TX_FREE_MAX_COUNT); ++ ++ spin_unlock_bh(&hif->tx_lock); ++ ++ return rc; ++} ++ ++/* hif_isr- ++ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block ++ */ ++static irqreturn_t hif_isr(int irq, void *dev_id) ++{ ++ struct pfe_hif *hif = (struct pfe_hif *) dev_id; ++ int int_status; ++ ++ /*Read hif interrupt source register */ ++ int_status = readl_relaxed(HIF_INT_SRC); ++ ++ if ((int_status & HIF_INT) == 0) ++ return(IRQ_NONE); ++ ++ int_status &= ~(HIF_INT); ++ ++ if (int_status & HIF_RXPKT_INT) { ++ int_status &= ~(HIF_RXPKT_INT); ++ ++ /* Disable interrupts */ ++ writel_relaxed(0, HIF_INT_ENABLE); ++ ++ napi_first_batch = 1; ++ ++ if (napi_schedule_prep(&hif->napi)) ++ { ++#ifdef HIF_NAPI_STATS ++ hif->napi_counters[NAPI_SCHED_COUNT]++; ++#endif ++ __napi_schedule(&hif->napi); ++ } ++ } ++ ++ if (int_status) { ++ printk(KERN_INFO "%s : Invalid interrupt : %d\n", __func__, int_status); ++ writel(int_status, HIF_INT_SRC); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++ ++void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int data2) ++{ ++ unsigned int client_id = data1; ++ ++ if (client_id >= HIF_CLIENTS_MAX) ++ { ++ printk(KERN_ERR "%s: client id %d out of bounds\n", __func__, client_id); ++ return; ++ } ++ ++ switch (req) { ++ case REQUEST_CL_REGISTER: ++ /* Request for register a client */ ++ printk(KERN_INFO "%s: register client_id %d\n", __func__, client_id); ++ pfe_hif_client_register(hif, client_id, (struct hif_client_shm *)&hif->shm->client[client_id]); ++ break; ++ ++ case REQUEST_CL_UNREGISTER: ++ printk(KERN_INFO "%s: unregister client_id %d\n", __func__, client_id); ++ ++ /* Request for unregister a client */ ++ pfe_hif_client_unregister(hif, client_id); ++ ++ break; ++ ++ default: ++ printk(KERN_ERR "%s: unsupported request %d\n", __func__, req); ++ break; ++ } ++ ++ /*TODO check for TMU queue resume request */ ++ ++ /*Process client Tx queues ++ * Currently we don't have checking for tx pending*/ ++} ++ ++/** pfe_hif_rx_poll ++ * This function is NAPI poll function to process HIF Rx queue. ++ */ ++static int pfe_hif_rx_poll(struct napi_struct *napi, int budget) ++{ ++ struct pfe_hif *hif = container_of(napi, struct pfe_hif, napi); ++ int work_done; ++ ++#ifdef HIF_NAPI_STATS ++ hif->napi_counters[NAPI_POLL_COUNT]++; ++#endif ++ ++ work_done = pfe_hif_rx_process(hif, budget); ++ ++ if (work_done < budget) ++ { ++ napi_complete(napi); ++ writel_relaxed(HIF_INT_MASK, HIF_INT_ENABLE); ++ } ++#ifdef HIF_NAPI_STATS ++ else ++ hif->napi_counters[NAPI_FULL_BUDGET_COUNT]++; ++#endif ++ ++ return work_done; ++} ++ ++/* pfe_hif_init ++ * This function initializes the baseaddresses and irq, etc. ++ */ ++int pfe_hif_init(struct pfe *pfe) ++{ ++ struct pfe_hif *hif = &pfe->hif; ++ int err; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ hif->dev = pfe->dev; ++ hif->irq = pfe->hif_irq; ++ ++ if ((err = pfe_hif_alloc_descr(hif))) { ++ goto err0; ++ } ++ ++ if (pfe_hif_init_buffers(hif)) { ++ printk(KERN_ERR "%s: Could not initialize buffer descriptors\n", __func__); ++ err = -ENOMEM; ++ goto err1; ++ } ++ ++ /* Initilize NAPI for Rx processing */ ++ init_dummy_netdev(&hif->dummy_dev); ++ netif_napi_add(&hif->dummy_dev, &hif->napi, pfe_hif_rx_poll, HIF_RX_POLL_WEIGHT); ++ napi_enable(&hif->napi); ++ ++ spin_lock_init(&hif->tx_lock); ++ spin_lock_init(&hif->lock); ++ ++ hif_init(); ++ hif_rx_enable(); ++ hif_tx_enable(); ++ ++ /* Disable tx done interrupt */ ++ writel(HIF_INT_MASK, HIF_INT_ENABLE); ++ ++ gpi_enable(HGPI_BASE_ADDR); ++ ++#ifdef __KERNEL__ ++ err = request_irq(hif->irq, hif_isr, 0, "pfe_hif", hif); ++ if (err) { ++ printk(KERN_ERR "%s: failed to get the hif IRQ = %d\n", __func__, hif->irq); ++ goto err1; ++ } ++#else ++ /*TODO register interrupts */ ++#endif ++ ++ return 0; ++err1: ++ pfe_hif_free_descr(hif); ++err0: ++ return err; ++} ++ ++/* pfe_hif_exit- ++ */ ++void pfe_hif_exit(struct pfe *pfe) ++{ ++ struct pfe_hif *hif = &pfe->hif; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ spin_lock_bh(&hif->lock); ++ hif->shm->gClient_status[0] = 0; ++ hif->shm->gClient_status[1] = 0; /* Make sure all clients are disabled */ ++ ++ spin_unlock_bh(&hif->lock); ++ ++ /*Disable Rx/Tx */ ++ gpi_disable(HGPI_BASE_ADDR); ++ hif_rx_disable(); ++ hif_tx_disable(); ++ ++ napi_disable(&hif->napi); ++ netif_napi_del(&hif->napi); ++ ++#ifdef __KERNEL__ ++ free_irq(hif->irq, hif); ++#endif ++ pfe_hif_release_buffers(hif); ++ pfe_hif_free_descr(hif); ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_hif.h +@@ -0,0 +1,322 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_HIF_H_ ++#define _PFE_HIF_H_ ++ ++#include ++ ++#define HIF_NAPI_STATS ++ ++#define HIF_CLIENT_QUEUES_MAX 16 ++#define HIF_RX_POLL_WEIGHT 64 ++ ++#define HIF_RX_PKT_MIN_SIZE 0x800 /* 2KB */ ++#define HIF_RX_PKT_MIN_SIZE_MASK ~(HIF_RX_PKT_MIN_SIZE - 1) ++#define ROUND_MIN_RX_SIZE(_sz) ((_sz + (HIF_RX_PKT_MIN_SIZE - 1)) & HIF_RX_PKT_MIN_SIZE_MASK) ++#define PRESENT_OFST_IN_PAGE(_buf) (((unsigned long int)_buf & (PAGE_SIZE - 1)) & HIF_RX_PKT_MIN_SIZE_MASK) ++ ++enum { ++ NAPI_SCHED_COUNT = 0, ++ NAPI_POLL_COUNT, ++ NAPI_PACKET_COUNT, ++ NAPI_DESC_COUNT, ++ NAPI_FULL_BUDGET_COUNT, ++ NAPI_CLIENT_FULL_COUNT, ++ NAPI_MAX_COUNT ++}; ++ ++ ++/* XXX HIF_TX_DESC_NT value should be always greter than 4, ++ * Otherwise HIF_TX_POLL_MARK will become zero. ++ */ ++#if defined(CONFIG_PLATFORM_PCI) ++#define HIF_RX_DESC_NT 4 ++#define HIF_TX_DESC_NT 4 ++#else ++#if defined(CONFIG_COMCERTO_64K_PAGES) ++#define HIF_RX_DESC_NT 64 ++#else ++#define HIF_RX_DESC_NT 256 ++#endif ++#define HIF_TX_DESC_NT 2048 ++#endif ++ ++#define HIF_FIRST_BUFFER (1 << 0) ++#define HIF_LAST_BUFFER (1 << 1) ++#define HIF_DONT_DMA_MAP (1 << 2) //TODO merge it with TSO ++#define HIF_DATA_VALID (1 << 3) ++#define HIF_TSO (1 << 4) ++ ++#define MAX_VAP_SUPPORT 3 ++#define MAX_WIFI_VAPS MAX_VAP_SUPPORT ++ ++enum { ++ PFE_CL_GEM0 = 0, ++ PFE_CL_GEM1, ++ PFE_CL_GEM2, ++ PFE_CL_VWD0, ++ PFE_CL_VWD_LAST = PFE_CL_VWD0 + MAX_VAP_SUPPORT, ++ PFE_CL_PCAP0, ++ HIF_CLIENTS_MAX ++}; ++ ++/*structure to store client queue info */ ++struct hif_rx_queue { ++ struct rx_queue_desc *base; ++ u32 size; ++ u32 write_idx; ++}; ++ ++struct hif_tx_queue { ++ struct tx_queue_desc *base; ++ u32 size; ++ u32 ack_idx; ++}; ++ ++/*Structure to store the client info */ ++struct hif_client { ++ int rx_qn; ++ struct hif_rx_queue rx_q[HIF_CLIENT_QUEUES_MAX]; ++ int tx_qn; ++ struct hif_tx_queue tx_q[HIF_CLIENT_QUEUES_MAX]; ++}; ++ ++/*HIF hardware buffer descriptor */ ++struct hif_desc { ++ volatile u32 ctrl; ++ volatile u32 status; ++ volatile u32 data; ++ volatile u32 next; ++}; ++ ++struct __hif_desc { ++ u32 ctrl; ++ u32 status; ++ u32 data; ++}; ++ ++struct hif_desc_sw { ++ dma_addr_t data; ++ u16 len; ++ u8 client_id; ++ u8 q_no; ++ u16 flags; ++}; ++ ++struct hif_hdr { ++ u8 client_id; ++ u8 qNo; ++ u16 client_ctrl; ++ u16 client_ctrl1; ++}; ++ ++struct __hif_hdr { ++ union { ++ struct hif_hdr hdr; ++ u32 word[2]; ++ }; ++}; ++ ++struct hif_lro_hdr { ++ u16 data_offset; ++ u16 mss; ++}; ++ ++struct hif_ipsec_hdr { ++ u16 sa_handle[2]; ++}__attribute__((packed)); ++ ++#define MAX_TSO_BUF_DESCS 5 ++struct hif_tso_buf_desc { ++ u32 addr; ++ u32 ctrl; ++#define TSO_CTRL_LAST_BUFFER (1 << 31) ++}; ++ ++struct hif_tso_hdr { ++ struct hif_hdr pkt_hdr; ++ u16 ip_off; ++ u16 ip_id; ++ u16 ip_len; ++ u16 tcp_off; ++ u32 tcp_seq; ++} __attribute__((packed)); ++ ++struct hif_tso_hdr_nocpy { ++ struct hif_tso_hdr tso_hdr; ++ struct hif_tso_buf_desc bdesc[MAX_TSO_BUF_DESCS]; ++} __attribute__((packed)); ++ ++struct hif_pcap_hdr { ++ u8 ifindex; ++ u8 unused; ++ u16 seqno; ++ u32 timestamp; ++}__attribute__((packed)); ++ ++/* HIF_CTRL_TX... defines */ ++#define HIF_CTRL_TX_TSO_NOCPY (1 << 8) ++#define HIF_CTRL_TX_IPSEC_OUT (1 << 7) ++#define HIF_CTRL_TX_OWN_MAC (1 << 6) ++#define HIF_CTRL_TX_TSO_END (1 << 5) ++#define HIF_CTRL_TX_TSO6 (1 << 4) ++#define HIF_CTRL_TX_TSO (1 << 3) ++#define HIF_CTRL_TX_CHECKSUM (1 << 2) ++#define HIF_CTRL_TX_CSUM_VALIDATE (1 << 1) ++#define HIF_CTRL_TX_WIFI (1 << 0) ++ ++/* HIF_CTRL_RX... defines */ ++#define HIF_CTRL_RX_OFFSET_OFST (24) ++#define HIF_CTRL_RX_PE_ID_OFST (16) ++#define HIF_CTRL_RX_IPSEC_IN (1 << 4) ++#define HIF_CTRL_RX_WIFI_EXPT (1 << 3) ++#define HIF_CTRL_RX_CHECKSUMMED (1 << 2) ++#define HIF_CTRL_RX_CONTINUED (1 << 1) ++#define HIF_CTRL_RX_WIFI_HEADROOM (1 << 0) ++ ++#define HIF_CTRL_VAPID_OFST (8) ++ ++struct pfe_hif { ++ /* To store registered clients in hif layer */ ++ struct hif_client client[HIF_CLIENTS_MAX]; ++ struct hif_shm *shm; ++ int irq; ++ ++ void *descr_baseaddr_v; ++ unsigned long descr_baseaddr_p; ++ ++ struct hif_desc *RxBase; ++ u32 RxRingSize; ++ u32 RxtocleanIndex; ++ void *rx_buf_addr[HIF_RX_DESC_NT]; ++ int rx_buf_len[HIF_RX_DESC_NT]; ++ unsigned int qno; ++ unsigned int client_id; ++ unsigned int client_ctrl; ++ unsigned int started; ++ ++ struct hif_desc *TxBase; ++ u32 TxRingSize; ++ u32 Txtosend; ++ u32 Txtoclean; ++ u32 TxAvail; ++ u32 Txtoflush; ++ struct hif_desc_sw tx_sw_queue[HIF_TX_DESC_NT]; ++ struct hif_tso_hdr_nocpy *tso_hdr_v; ++ dma_addr_t tso_hdr_p; ++ ++ spinlock_t tx_lock; ++ spinlock_t lock; ++ struct net_device dummy_dev; ++ struct napi_struct napi; ++ struct device *dev; ++ ++#ifdef CONFIG_HOTPLUG_CPU ++ struct notifier_block cpu_notify; ++#endif ++ ++#ifdef HIF_NAPI_STATS ++ unsigned int napi_counters[NAPI_MAX_COUNT]; ++#endif ++}; ++ ++void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no, void *data, u32 len, unsigned int flags); ++int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no, void *data, unsigned int len); ++void __hif_tx_done_process(struct pfe_hif *hif, int count); ++void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int data2); ++int pfe_hif_init(struct pfe *pfe); ++void pfe_hif_exit(struct pfe *pfe); ++ ++static inline void hif_tx_done_process(struct pfe_hif *hif, int count) ++{ ++ spin_lock_bh(&hif->tx_lock); ++ __hif_tx_done_process(hif, count); ++ spin_unlock_bh(&hif->tx_lock); ++} ++ ++static inline void hif_tx_lock(struct pfe_hif *hif) ++{ ++ spin_lock_bh(&hif->tx_lock); ++} ++ ++static inline void hif_tx_unlock(struct pfe_hif *hif) ++{ ++ spin_unlock_bh(&hif->tx_lock); ++} ++ ++static inline int __hif_tx_avail(struct pfe_hif *hif) ++{ ++ return hif->TxAvail; ++} ++ ++#if defined(CONFIG_PLATFORM_C2000) ++static inline void __memcpy8(void *dst, void *src) ++{ ++ asm volatile ( "ldm %1, {r9, r10}\n\t" ++ "stm %0, {r9, r10}\n\t" ++ : ++ : "r" (dst), "r" (src) ++ : "r9", "r10", "memory" ++ ); ++} ++ ++static inline void __memcpy12(void *dst, void *src) ++{ ++ asm volatile ( "ldm %1, {r8, r9, r10}\n\t" ++ "stm %0, {r8, r9, r10}\n\t" ++ : ++ : "r" (dst), "r" (src) ++ : "r8", "r9", "r10", "memory" ++ ); ++} ++ ++static inline void __memcpy16(void *dst, void *src) ++{ ++ asm volatile ( "ldm %1, {r7, r8, r9, r10}\n\t" ++ "stm %0, {r7, r8, r9, r10}\n\t" ++ : ++ : "r"(dst), "r"(src) ++ : "r7", "r8", "r9", "r10", "memory" ++ ); ++} ++ ++#define HIF_MEMCPY_BURSTSIZE 32 /*__memcpy copy 32byte in a burst*/ ++static inline void __memcpy(void *dst, void *src, unsigned int len) ++{ ++ void *end = src + len; ++ ++ dst = (void *)((unsigned long)dst & ~0x3); ++ src = (void *)((unsigned long)src & ~0x3); ++ ++ while (src < end) { ++ asm volatile ( "ldm %1!, {r3, r4, r5, r6, r7, r8, r9, r10}\n\t" ++ "stm %0!, {r3, r4, r5, r6, r7, r8, r9, r10}\n\t" ++ : "+r"(dst), "+r"(src) ++ : ++ : "r3", "r4", "r5", "r6", "r7", "r8", "r9", "r10", "memory" ++ ); ++ } ++} ++#else ++#define __memcpy8(dst, src) memcpy(dst, src, 8) ++#define __memcpy12(dst, src) memcpy(dst, src, 12) ++#define __memcpy(dst, src, len) memcpy(dst, src, len) ++#endif ++#endif /* _PFE_HIF_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c +@@ -0,0 +1,658 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#if LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0) ++#include ++#endif ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0) ++//#include ++#endif ++ ++#include "pfe_mod.h" ++#include "pfe_hif.h" ++#include "pfe_hif_lib.h" ++#include "pfe_ctrl_hal.h" ++ ++ ++unsigned int lro_mode = 0; ++unsigned int page_mode = 0; ++unsigned int tx_qos = 0; ++unsigned int pfe_pkt_size; ++unsigned int pfe_pkt_headroom; ++unsigned int emac_txq_cnt; ++ ++/** @pfe_hal_lib.c. ++ * Common functions used by HIF client drivers ++ */ ++ ++/*HIF shared memory Global variable */ ++struct hif_shm ghif_shm; ++ ++/* TMU tx transmitted packets counter, 1 per TMU */ ++unsigned int TMU_DMEM_SH(tx_trans)[EMAC_TXQ_CNT]; ++ ++/* Cleanup the HIF shared memory, release HIF rx_buffer_pool. ++ * This function should be called after pfe_hif_exit ++ * ++ * @param[in] hif_shm Shared memory address location in DDR ++ */ ++static void pfe_hif_shm_clean(struct hif_shm *hif_shm) ++{ ++ int i; ++ void *pkt; ++ ++ for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) { ++ pkt = hif_shm->rx_buf_pool[i]; ++ if (pkt) { ++ hif_shm->rx_buf_pool[i] = NULL; ++ pkt -= pfe_pkt_headroom; ++ ++ if (page_mode) { ++ put_page(virt_to_page(pkt)); ++ } else ++ kfree(pkt); ++ } ++ } ++} ++ ++/* Initialize shared memory used between HIF driver and clients, ++ * allocate rx_buffer_pool required for HIF Rx descriptors. ++ * This function should be called before initializing HIF driver. ++ * ++ * @param[in] hif_shm Shared memory address location in DDR ++ * @rerurn 0 - on succes, <0 on fail to initialize ++ */ ++static int pfe_hif_shm_init(struct hif_shm *hif_shm) ++{ ++ int i; ++ void *pkt; ++ ++ memset(hif_shm, 0, sizeof(struct hif_shm)); ++ hif_shm->rx_buf_pool_cnt = HIF_RX_DESC_NT; ++ ++ for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) { ++ if (page_mode) { ++ pkt = (void *)__get_free_page(GFP_KERNEL | GFP_DMA_PFE); ++ } else ++ pkt = kmalloc(PFE_BUF_SIZE, GFP_KERNEL | GFP_DMA_PFE); ++ ++ if (pkt) ++ hif_shm->rx_buf_pool[i] = pkt + pfe_pkt_headroom; ++ else ++ goto err0; ++ } ++ ++ return 0; ++ ++err0: ++ printk(KERN_ERR "%s Low memory\n", __func__); ++ pfe_hif_shm_clean(hif_shm); ++ return -ENOMEM; ++} ++ ++/*This function sends indication to HIF driver ++ * ++ * @param[in] hif hif context ++ **/ ++static void hif_lib_indicate_hif(struct pfe_hif *hif, int req, int data1, int data2) ++{ ++ //TODO : If we separate HIF and HIF LIB, then send req and data through shared memory. ++ ++ hif_process_client_req(hif, req, data1, data2); ++} ++ ++void hif_lib_indicate_client(int client_id, int event_type, int qno) ++{ ++ struct hif_client_s *client = pfe->hif_client[client_id]; ++ ++ /* ++ * TODO : Right now, all events are queue number based. So we are masking events per queue ++ * basis. Later if we add any events those do not depend on queue number, then we may ++ * may need may need to add masking per event. ++ */ ++ if (!client || (event_type >= HIF_EVENT_MAX) || (qno >= HIF_CLIENT_QUEUES_MAX) ) ++ return; ++ ++ if (!test_and_set_bit(qno, &client->queue_mask[event_type])) { ++ client->event_handler(client->priv, event_type, qno); ++ } ++ ++} ++ ++ ++/*This function releases Rx queue descriptors memory and pre-filled buffers ++ * ++ * @param[in] client hif_client context ++ */ ++static void hif_lib_client_release_rx_buffers(struct hif_client_s *client) ++{ ++ struct rx_queue_desc *desc; ++ int qno, ii; ++ void *buf; ++ ++ for (qno = 0; qno < client->rx_qn; qno++) { ++ desc = client->rx_q[qno].base; ++ ++ for (ii = 0; ii < client->rx_q[qno].size; ii++) { ++ buf = (void *)desc->data; ++ if (buf) { ++ buf -= pfe_pkt_headroom; ++ ++ if (page_mode) ++ free_page((unsigned long)buf); ++ else ++ kfree(buf); ++ ++ desc->ctrl = 0; ++ } ++ ++ desc++; ++ } ++ } ++ ++ kfree(client->rx_qbase); ++} ++ ++ ++/*This function allocates memory for the rxq descriptors and pre-fill rx queues ++ * with buffers. ++ * @param[in] client client context ++ * @param[in] q_size size of the rxQ, all queues are of same size ++ */ ++static int hif_lib_client_init_rx_buffers(struct hif_client_s *client, int q_size) ++{ ++ struct rx_queue_desc *desc; ++ struct hif_client_rx_queue *queue; ++ int ii, qno; ++ ++ /*Allocate memory for the client queues */ ++ client->rx_qbase = kzalloc(client->rx_qn * q_size * sizeof(struct rx_queue_desc), GFP_KERNEL); ++ if (!client->rx_qbase){ ++ goto err; ++ } ++ ++ for (qno = 0; qno < client->rx_qn; qno++) { ++ queue = &client->rx_q[qno]; ++ ++ queue->base = client->rx_qbase + qno * q_size * sizeof(struct rx_queue_desc); ++ queue->size = q_size; ++ queue->read_idx = 0; ++ queue->write_idx = 0; ++ ++ dbg_print_info("rx queue: %d, base: %p, size: %d \n", qno, queue->base, queue->size); ++ } ++ ++ for (qno = 0; qno < client->rx_qn; qno++) { ++ queue = &client->rx_q[qno]; ++ desc = queue->base; ++ ++ for (ii = 0; ii < queue->size; ii++) { ++ desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | CL_DESC_OWN; ++ desc++; ++ } ++ } ++ ++ return 0; ++ ++err: ++ return 1; ++} ++ ++#define inc_cl_idx(idxname) idxname = (idxname+1) & (queue->size-1) ++ ++static void hif_lib_client_cleanup_tx_queue(struct hif_client_tx_queue *queue) ++{ ++ dbg_print_info( "%s\n", __func__); ++ ++ /* Check if there are any pending packets. Client must flush the tx queues ++ before unregistering, by calling by calling hif_lib_tx_get_next_complete() */ ++ /* Hif no longer calls since we are no longer registered */ ++ ++ if (queue->tx_pending) ++ printk(KERN_ERR "%s: pending transmit packets\n", __func__); ++} ++ ++static void hif_lib_client_release_tx_buffers(struct hif_client_s *client) ++{ ++ int qno; ++ ++ dbg_print_info("%s\n", __func__); ++ ++ for (qno = 0; qno < client->tx_qn; qno++) { ++ hif_lib_client_cleanup_tx_queue(&client->tx_q[qno]); ++ } ++ ++ kfree(client->tx_qbase); ++} ++ ++static int hif_lib_client_init_tx_buffers(struct hif_client_s *client, int q_size) ++{ ++ struct hif_client_tx_queue *queue; ++ int qno; ++ ++ client->tx_qbase = kzalloc(client->tx_qn * q_size * sizeof(struct tx_queue_desc), GFP_KERNEL); ++ if (!client->tx_qbase) { ++ return 1; ++ } ++ ++ for (qno = 0; qno < client->tx_qn; qno++) { ++ queue = &client->tx_q[qno]; ++ ++ queue->base = client->tx_qbase + qno * q_size * sizeof(struct tx_queue_desc); ++ queue->size = q_size; ++ queue->read_idx = 0; ++ queue->write_idx = 0; ++ queue->tx_pending = 0; ++ queue->nocpy_flag = 0; ++ queue->prev_tmu_tx_pkts = 0; ++ queue->done_tmu_tx_pkts = 0; ++ ++ dbg_print_info("tx queue: %d, base: %p, size: %d \n", qno, queue->base, queue->size); ++ } ++ ++ return 0; ++} ++ ++static int hif_lib_event_dummy( void *priv, int event_type, int qno) ++{ ++ return 0; ++} ++ ++int hif_lib_client_register(struct hif_client_s *client) ++{ ++ struct hif_shm *hif_shm; ++ struct hif_client_shm *client_shm; ++ int err, i; ++// int loop_cnt = 0; ++ ++ dbg_print_info("%s\n", __func__); ++ ++ /*Allocate memory before spin_lock*/ ++ if (hif_lib_client_init_rx_buffers(client, client->rx_qsize)) { ++ err = -ENOMEM; ++ goto err_rx; ++ } ++ ++ if (hif_lib_client_init_tx_buffers(client, client->tx_qsize)) { ++ err = -ENOMEM; ++ goto err_tx; ++ } ++ ++ spin_lock_bh(&pfe->hif.lock); ++ if (!(client->pfe) || (client->id >= HIF_CLIENTS_MAX) || (pfe->hif_client[client->id])) { ++ err = -EINVAL; ++ goto err; ++ } ++ ++ hif_shm = client->pfe->hif.shm; ++ ++ if (!client->event_handler) ++ client->event_handler = hif_lib_event_dummy; ++ ++ /*Initialize client specific shared memory */ ++ client_shm = (struct hif_client_shm *)&hif_shm->client[client->id]; ++ client_shm->rx_qbase = (unsigned long int)client->rx_qbase; ++ client_shm->rx_qsize = client->rx_qsize; ++ client_shm->tx_qbase = (unsigned long int)client->tx_qbase; ++ client_shm->tx_qsize = client->tx_qsize; ++ client_shm->ctrl = (client->tx_qn << CLIENT_CTRL_TX_Q_CNT_OFST) | (client->rx_qn << CLIENT_CTRL_RX_Q_CNT_OFST); ++// spin_lock_init(&client->rx_lock); ++ ++ for (i = 0; i < HIF_EVENT_MAX; i++) { ++ client->queue_mask[i] = 0; /* By default all events are unmasked */ ++ } ++ ++ /*Indicate to HIF driver*/ ++ hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_REGISTER, client->id, 0); ++ ++ dbg_print_info("%s: client: %p, client_id: %d, tx_qsize: %d, rx_qsize: %d\n", ++ __func__, client, client->id, client->tx_qsize, client->rx_qsize); ++ ++ client->cpu_id = -1; ++ ++ pfe->hif_client[client->id] = client; ++ spin_unlock_bh(&pfe->hif.lock); ++ ++ return 0; ++ ++err: ++ spin_unlock_bh(&pfe->hif.lock); ++ hif_lib_client_release_tx_buffers(client); ++ ++err_tx: ++ hif_lib_client_release_rx_buffers(client); ++ ++err_rx: ++ return err; ++} ++ ++int hif_lib_client_unregister(struct hif_client_s *client) ++{ ++ struct pfe *pfe = client->pfe; ++ u32 client_id = client->id; ++ ++ printk(KERN_INFO "%s : client: %p, client_id: %d, txQ_depth: %d, rxQ_depth: %d\n", ++ __func__, client, client->id, client->tx_qsize, client->rx_qsize); ++ ++ ++ spin_lock_bh(&pfe->hif.lock); ++ hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_UNREGISTER, client->id, 0); ++ ++ hif_lib_client_release_tx_buffers(client); ++ hif_lib_client_release_rx_buffers(client); ++ pfe->hif_client[client_id] = NULL; ++ spin_unlock_bh(&pfe->hif.lock); ++ ++ return 0; ++} ++ ++int hif_lib_event_handler_start(struct hif_client_s *client, int event, int qno) ++{ ++ struct hif_client_rx_queue *queue = &client->rx_q[qno]; ++ struct rx_queue_desc *desc = queue->base + queue->read_idx; ++ ++ if ((event >= HIF_EVENT_MAX) || ( qno >= HIF_CLIENT_QUEUES_MAX)) { ++ dbg_print_info("%s: Unsupported event : %d queue number : %d\n", __func__, event, qno); ++ return -1; ++ } ++ ++ test_and_clear_bit(qno, &client->queue_mask[event]); ++ ++ switch (event) { ++ case EVENT_RX_PKT_IND: ++ if (!(desc->ctrl & CL_DESC_OWN)) ++ hif_lib_indicate_client(client->id, EVENT_RX_PKT_IND, qno); ++ break; ++ ++ case EVENT_HIGH_RX_WM: ++ case EVENT_TXDONE_IND: ++ default: ++ break; ++ } ++ ++ return 0; ++} ++ ++ ++/*This function gets one packet from the specified client queue ++ * It also refill the rx buffer */ ++void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int *ofst, unsigned int *rx_ctrl, unsigned int *desc_ctrl, void **priv_data) ++{ ++ struct hif_client_rx_queue *queue = &client->rx_q[qno]; ++ struct rx_queue_desc *desc; ++ void *pkt = NULL; ++ ++ //printk(KERN_INFO "%s\n", __func__); ++#if defined(CONFIG_PLATFORM_EMULATION) ++ printk(KERN_INFO "%s:qno:%d cid:%d desc:%p rdidx:%d \n", ++ __func__, qno, client->id, desc, ++ queue->read_idx); ++#endif ++ ++ /* Following lock is to protect rx queue access from, hif_lib_event_handler_start. ++ * In general below lock is not required, because hif_lib_xmit_pkt and ++ * hif_lib_event_handler_start are called from napi poll and which is not ++ * re-entrant. But if some client use in different way this lock is required. ++ */ ++ //spin_lock_irqsave(&client->rx_lock, flags); ++ desc = queue->base + queue->read_idx; ++ if (!(desc->ctrl & CL_DESC_OWN)) { ++ pkt = desc->data - pfe_pkt_headroom; ++ ++ *rx_ctrl = desc->client_ctrl; ++ *desc_ctrl = desc->ctrl; ++ ++ if (desc->ctrl & CL_DESC_FIRST) { ++ u16 size = *rx_ctrl >> HIF_CTRL_RX_OFFSET_OFST; ++ ++ if (size) { ++ *len = CL_DESC_BUF_LEN(desc->ctrl) - PFE_PKT_HEADER_SZ - size; ++ *ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ + size; ++ *priv_data = desc->data + PFE_PKT_HEADER_SZ; ++ } else { ++ *len = CL_DESC_BUF_LEN(desc->ctrl) - PFE_PKT_HEADER_SZ; ++ *ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ; ++ *priv_data = NULL; ++ } ++ ++ } else { ++ *len = CL_DESC_BUF_LEN(desc->ctrl); ++ *ofst = pfe_pkt_headroom; ++ } ++ ++ desc->data = NULL; // Needed so we don't free a buffer/page twice on module_exit ++ smp_wmb(); ++ ++ desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | CL_DESC_OWN; ++ inc_cl_idx(queue->read_idx); ++ } ++ ++ //spin_unlock_irqrestore(&client->rx_lock, flags); ++ return pkt; ++} ++ ++static inline void hif_hdr_write(struct hif_hdr *pkt_hdr, unsigned int client_id, unsigned int qno, u32 client_ctrl) ++{ ++ /* Optimize the write since the destinaton may be non-cacheable */ ++ if (!((unsigned long)pkt_hdr & 0x3)) { ++ ((u32 *)pkt_hdr)[0] = (client_ctrl << 16) | (qno << 8) | client_id; ++ } else { ++ ((u16 *)pkt_hdr)[0] = (qno << 8) | (client_id & 0xFF); ++ ((u16 *)pkt_hdr)[1] = (client_ctrl & 0xFFFF); ++ } ++} ++ ++/*This function puts the given packet in the specific client queue */ ++void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data, unsigned int len, u32 client_ctrl, unsigned int flags, void *client_data) ++{ ++ struct hif_client_tx_queue *queue = &client->tx_q[qno]; ++ struct tx_queue_desc *desc = queue->base + queue->write_idx; ++ ++ //printk(KERN_INFO "%s\n",__func__); ++ ++ /* First buffer */ ++ if (flags & HIF_FIRST_BUFFER) ++ { ++ data -= sizeof(struct hif_hdr); ++ len += sizeof(struct hif_hdr); ++ ++ hif_hdr_write(data, client->id, qno, client_ctrl); ++ } ++ ++ desc->data = client_data; ++ desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(flags); ++ ++ __hif_xmit_pkt(&pfe->hif, client->id, qno, data, len, flags); ++ ++ inc_cl_idx(queue->write_idx); ++ queue->tx_pending++; ++ queue->jiffies_last_packet = jiffies; ++ ++} ++ ++/*This function puts the given packet in the specific client queue */ ++int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data, unsigned int len, u32 client_ctrl, void *client_data) ++{ ++ struct hif_client_tx_queue *queue = &client->tx_q[qno]; ++ struct tx_queue_desc *desc = queue->base + queue->write_idx; ++ ++ //printk(KERN_INFO "%s\n",__func__); ++ ++ if (queue->tx_pending < queue->size) { ++ /*Construct pkt header */ ++ ++ data -= sizeof(struct hif_hdr); ++ len += sizeof(struct hif_hdr); ++ ++ hif_hdr_write(data, client->id, qno, client_ctrl); ++ ++ desc->data = client_data; ++ desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(HIF_FIRST_BUFFER | HIF_LAST_BUFFER | HIF_DATA_VALID); ++ ++ if (hif_xmit_pkt(&pfe->hif, client->id, qno, data, len)) ++ return 1; ++ ++ inc_cl_idx(queue->write_idx); ++ queue->tx_pending++; ++ queue->jiffies_last_packet = jiffies; ++ ++ return 0; ++ } ++ ++ dbg_print_info("%s Tx client %d qno %d is full\n",__func__, client->id, qno); ++ return 1; ++} ++ ++void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno, unsigned int *flags, int count) ++{ ++ struct hif_client_tx_queue *queue = &client->tx_q[qno]; ++ struct tx_queue_desc *desc = queue->base + queue->read_idx; ++ ++ dbg_print_info("%s: qno : %d rd_indx: %d pending:%d\n",__func__, qno, queue->read_idx, queue->tx_pending); ++ ++ if (!queue->tx_pending ) ++ return NULL; ++ ++ if (queue->nocpy_flag && !queue->done_tmu_tx_pkts) { ++ u32 tmu_tx_pkts = be32_to_cpu(pe_dmem_read(TMU0_ID + client->id, virt_to_tmu_dmem(&tx_trans[qno]), 4)); ++ ++ if (queue->prev_tmu_tx_pkts > tmu_tx_pkts) ++ queue->done_tmu_tx_pkts = UINT_MAX - queue->prev_tmu_tx_pkts + tmu_tx_pkts; ++ else ++ queue->done_tmu_tx_pkts = tmu_tx_pkts - queue->prev_tmu_tx_pkts; ++ ++ queue->prev_tmu_tx_pkts = tmu_tx_pkts; ++ ++ if (!queue->done_tmu_tx_pkts) { ++ return NULL; ++ } ++ } ++ ++ if (desc->ctrl & CL_DESC_OWN) { ++ hif_tx_done_process(&pfe->hif, count); ++ ++ //Check again, if packets done in tx queue. ++ if (desc->ctrl & CL_DESC_OWN) ++ return NULL; ++ } ++ ++ inc_cl_idx(queue->read_idx); ++ queue->tx_pending--; ++ ++ *flags = CL_DESC_GET_FLAGS(desc->ctrl); ++ ++ if (queue->done_tmu_tx_pkts && (*flags & HIF_LAST_BUFFER)) ++ queue->done_tmu_tx_pkts--; ++ ++ ++ return desc->data; ++} ++ ++//FIXME: TMU queues length mapping needs to be declared in shared PFE/PFE_CTRL header ++static void hif_lib_tmu_credit_init(struct pfe *pfe) ++{ ++ int i, q; ++ ++ for (i = 0; i < NUM_GEMAC_SUPPORT; i++) ++ for (q = 0; q < emac_txq_cnt; q++) { ++ pfe->tmu_credit.tx_credit_max[i][q] = (q == 0) ? DEFAULT_Q0_QDEPTH : DEFAULT_MAX_QDEPTH; ++ pfe->tmu_credit.tx_credit[i][q] = pfe->tmu_credit.tx_credit_max[i][q]; ++ } ++} ++/** __hif_lib_update_credit ++ * ++ * @param[in] client hif client context ++ * @param[in] queue queue number in match with TMU ++ */ ++void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue) ++{ ++ unsigned int tmu_tx_packets, tmp; ++ ++ if (tx_qos) { ++ tmu_tx_packets = be32_to_cpu(pe_dmem_read(TMU0_ID + client->id, virt_to_tmu_dmem(&tx_trans[queue]), 4)); ++ ++ // tx_packets counter overflowed ++ if (tmu_tx_packets > pfe->tmu_credit.tx_packets[client->id][queue]) { ++ tmp = UINT_MAX - tmu_tx_packets + pfe->tmu_credit.tx_packets[client->id][queue]; ++ pfe->tmu_credit.tx_credit[client->id][queue] = pfe->tmu_credit.tx_credit_max[client->id][queue] - tmp; ++ } ++ // TMU tx <= pfe_eth tx, normal case or both OF since last time ++ else ++ pfe->tmu_credit.tx_credit[client->id][queue] = pfe->tmu_credit.tx_credit_max[client->id][queue] - (pfe->tmu_credit.tx_packets[client->id][queue] - tmu_tx_packets); ++ } ++} ++ ++/** hif_lib_update_credit ++ * ++ * @param[in] client hif client context ++ * @param[in] queue queue number in match with TMU ++ */ ++void hif_lib_update_credit(struct hif_client_s *client, unsigned int queue) ++{ ++ spin_lock_bh(&pfe->hif.tx_lock); ++ __hif_lib_update_credit(client, queue); ++ spin_unlock_bh(&pfe->hif.tx_lock); ++} ++ ++int pfe_hif_lib_init(struct pfe *pfe) ++{ ++ int rc; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ if (lro_mode) { ++ page_mode = 1; ++ pfe_pkt_size = min(PAGE_SIZE, MAX_PFE_PKT_SIZE); ++ pfe_pkt_headroom = 0; ++ } else { ++ page_mode = 0; ++ pfe_pkt_size = PFE_PKT_SIZE; ++ pfe_pkt_headroom = PFE_PKT_HEADROOM; ++ } ++ ++ if (tx_qos) ++ emac_txq_cnt = EMAC_TXQ_CNT / 2; ++ else ++ emac_txq_cnt = EMAC_TXQ_CNT; ++ ++ hif_lib_tmu_credit_init(pfe); ++ pfe->hif.shm = &ghif_shm; ++ rc = pfe_hif_shm_init(pfe->hif.shm); ++ ++ return rc; ++} ++ ++ ++void pfe_hif_lib_exit(struct pfe *pfe) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ pfe_hif_shm_clean(pfe->hif.shm); ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h +@@ -0,0 +1,219 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_HIF_LIB_H_ ++#define _PFE_HIF_LIB_H_ ++ ++#include "pfe_hif.h" ++ ++#ifdef HIF_LIB_DEBUG ++#define dbg_print_info( fmt, args...) \ ++ printk(KERN_INFO fmt, ##args) ++#else ++#define dbg_print_info( fmt, args...) ++#endif ++ ++#define HIF_CL_REQ_TIMEOUT 10 ++ ++#if defined(CONFIG_COMCERTO_ZONE_DMA_NCNB) ++#define GFP_DMA_PFE (GFP_DMA_NCNB | __GFP_NOWARN) ++#else ++#define GFP_DMA_PFE 0 ++#endif ++ ++enum { ++ REQUEST_CL_REGISTER = 0, ++ REQUEST_CL_UNREGISTER, ++ HIF_REQUEST_MAX ++}; ++ ++enum { ++ EVENT_HIGH_RX_WM = 0, /* Event to indicate that client rx queue is reached water mark level */ ++ EVENT_RX_PKT_IND, /* Event to indicate that, packet recieved for client */ ++ EVENT_TXDONE_IND, /* Event to indicate that, packet tx done for client */ ++ HIF_EVENT_MAX ++}; ++ ++/*structure to store client queue info */ ++ ++/*structure to store client queue info */ ++struct hif_client_rx_queue { ++ struct rx_queue_desc *base; ++ u32 size; ++ u32 read_idx; ++ u32 write_idx; ++}; ++ ++struct hif_client_tx_queue { ++ struct tx_queue_desc *base; ++ u32 size; ++ u32 read_idx; ++ u32 write_idx; ++ u32 tx_pending; ++ unsigned long jiffies_last_packet; ++ u32 nocpy_flag; ++ u32 prev_tmu_tx_pkts; ++ u32 done_tmu_tx_pkts; ++ u32 cur_tso_hdr_p; ++ int tso_buf_cnt; ++}; ++ ++struct hif_client_s ++{ ++ int id; ++ int tx_qn; ++ int rx_qn; ++ void *rx_qbase; ++ void *tx_qbase; ++ /* FIXME tx/rx_qsize fields can be removed after per queue depth is supported*/ ++ int tx_qsize; ++ int rx_qsize; ++ int cpu_id; ++ ++// spinlock_t rx_lock; ++ struct hif_client_tx_queue tx_q[HIF_CLIENT_QUEUES_MAX]; ++ struct hif_client_rx_queue rx_q[HIF_CLIENT_QUEUES_MAX]; ++ int (*event_handler)(void *priv, int event, int data); ++ unsigned long queue_mask[HIF_EVENT_MAX]; ++ struct pfe *pfe; ++ void *priv; ++}; ++ ++ ++/* Client specific shared memory ++ * It contains number of Rx/Tx queues, base addresses and queue sizes */ ++struct hif_client_shm { ++ u32 ctrl; /*0-7: number of Rx queues, 8-15: number of tx queues */ ++ unsigned long rx_qbase; /*Rx queue base address */ ++ u32 rx_qsize; /*each Rx queue size, all Rx queues are of same size */ ++ unsigned long tx_qbase; /* Tx queue base address */ ++ u32 tx_qsize; /*each Tx queue size, all Tx queues are of same size */ ++}; ++ ++/*Client shared memory ctrl bit description */ ++#define CLIENT_CTRL_RX_Q_CNT_OFST 0 ++#define CLIENT_CTRL_TX_Q_CNT_OFST 8 ++#define CLIENT_CTRL_RX_Q_CNT(ctrl) (((ctrl) >> CLIENT_CTRL_RX_Q_CNT_OFST) & 0xFF) ++#define CLIENT_CTRL_TX_Q_CNT(ctrl) (((ctrl) >> CLIENT_CTRL_TX_Q_CNT_OFST) & 0xFF) ++ ++ ++ ++/*Shared memory used to communicate between HIF driver and host/client drivers ++ * Before starting the hif driver rx_buf_pool ans rx_buf_pool_cnt should be ++ * initialized with host buffers and buffers count in the pool. ++ * rx_buf_pool_cnt should be >= HIF_RX_DESC_NT. ++ * ++ */ ++struct hif_shm { ++ u32 rx_buf_pool_cnt; /*Number of rx buffers available*/ ++ void *rx_buf_pool[HIF_RX_DESC_NT];/*Rx buffers required to initialize HIF rx descriptors */ ++ unsigned long gClient_status[2]; /*Global client status bit mask */ ++ u32 hif_qfull; /*TODO Client-id that caused for the TMU3 queue stop */ ++ u32 hif_qresume; /*TODO */ ++ struct hif_client_shm client[HIF_CLIENTS_MAX]; /* Client specific shared memory */ ++}; ++ ++ ++#define CL_DESC_OWN (1 << 31) /* This sets owner ship to HIF driver */ ++#define CL_DESC_LAST (1 << 30) /* This indicates last packet for multi buffers handling */ ++#define CL_DESC_FIRST (1 << 29) /* This indicates first packet for multi buffers handling */ ++#define CL_DESC_BUF_LEN(x) ((x) & 0xFFFF) ++#define CL_DESC_FLAGS(x) (((x) & 0xF) << 16) ++#define CL_DESC_GET_FLAGS(x) (((x) >> 16) & 0xF) ++ ++struct rx_queue_desc { ++ void *data; ++ u32 ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/ ++ u32 client_ctrl; ++}; ++ ++struct tx_queue_desc { ++ void *data; ++ u32 ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/ ++}; ++ ++/* HIF Rx is not working properly for 2-byte aligned buffers and ++ * ip_header should be 4byte aligned for better iperformance. ++ * "ip_header = 64 + 6(hif_header) + 14 (MAC Header)" will be 4byte aligned. ++ */ ++#define PFE_PKT_HEADER_SZ sizeof(struct hif_hdr) ++#define PFE_BUF_SIZE 2048 /* must be big enough for headroom, pkt size and skb shared info */ ++#define PFE_PKT_HEADROOM 128 ++#define SKB_SHARED_INFO_SIZE 256 /* At least sizeof(struct skb_shared_info) bytes */ ++ ++//#define PFE_PKT_SIZE 1544 /* maximum ethernet packet size */ ++#define PFE_PKT_SIZE (PFE_BUF_SIZE - PFE_PKT_HEADROOM - SKB_SHARED_INFO_SIZE) /* maximum ethernet packet size after reassembly offload*/ ++#define MAX_L2_HDR_SIZE 14 /* Not correct for VLAN/PPPoE */ ++#define MAX_L3_HDR_SIZE 20 /* Not correct for IPv6 */ ++#define MAX_L4_HDR_SIZE 60 /* TCP with maximum options */ ++#define MAX_HDR_SIZE (MAX_L2_HDR_SIZE + MAX_L3_HDR_SIZE + MAX_L4_HDR_SIZE) ++#define MAX_WIFI_HDR_SIZE (MAX_L2_HDR_SIZE + MAX_L3_HDR_SIZE + 6) ++#define MAX_PFE_PKT_SIZE 16380UL /* Used in page mode to clamp packet size to the maximum supported by the hif hw interface (<16KiB) */ ++ ++extern unsigned int pfe_pkt_size; ++extern unsigned int pfe_pkt_headroom; ++extern unsigned int page_mode; ++extern unsigned int lro_mode; ++extern unsigned int tx_qos; ++extern unsigned int emac_txq_cnt; ++ ++int pfe_hif_lib_init(struct pfe *pfe); ++void pfe_hif_lib_exit(struct pfe *pfe); ++int hif_lib_client_register(struct hif_client_s *client); ++int hif_lib_client_unregister(struct hif_client_s *client); ++void __hif_lib_xmit_tso_hdr(struct hif_client_s *client, unsigned int qno, u32 client_ctrl, unsigned int ip_off, unsigned int ip_id, unsigned int ip_len, unsigned int tcp_off, unsigned int tcp_seq); ++void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data, unsigned int len, u32 client_ctrl, unsigned int flags, void *client_data); ++int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data, unsigned int len, u32 client_ctrl, void *client_data); ++void hif_lib_indicate_client(int cl_id, int event, int data); ++int hif_lib_event_handler_start( struct hif_client_s *client, int event, int data ); ++int hif_lib_tmu_queue_start( struct hif_client_s *client, int qno ); ++int hif_lib_tmu_queue_stop( struct hif_client_s *client, int qno ); ++void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno, unsigned int *flags, int count); ++void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int *ofst, unsigned int *rx_ctrl, unsigned int *desc_ctrl, void **priv_data); ++void hif_lib_update_credit(struct hif_client_s *client, unsigned int qno); ++void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue); ++void hif_lib_set_rx_cpu_affinity(struct hif_client_s *client, int cpu_id); ++void hif_lib_set_tx_queue_nocpy(struct hif_client_s *client, int qno, int enable); ++static inline int hif_lib_tx_avail(struct hif_client_s *client, unsigned int qno) ++{ ++ struct hif_client_tx_queue *queue = &client->tx_q[qno]; ++ ++ return (queue->size - queue->tx_pending); ++} ++ ++static inline int hif_lib_get_tx_wrIndex(struct hif_client_s *client, unsigned int qno) ++{ ++ struct hif_client_tx_queue *queue = &client->tx_q[qno]; ++ ++ return queue->write_idx; ++} ++ ++ ++static inline int hif_lib_tx_pending(struct hif_client_s *client, unsigned int qno) ++{ ++ struct hif_client_tx_queue *queue = &client->tx_q[qno]; ++ ++ return queue->tx_pending; ++} ++ ++#define hif_lib_tx_credit_avail(pfe, id, qno) pfe->tmu_credit.tx_credit[id][qno] ++#define hif_lib_tx_credit_max(pfe, id, qno) pfe->tmu_credit.tx_credit_max[id][qno] ++#define hif_lib_tx_credit_use(pfe, id, qno, credit) do {if (tx_qos) {pfe->tmu_credit.tx_credit[id][qno]-= credit; pfe->tmu_credit.tx_packets[id][qno]+=credit;}} while (0) ++ ++#endif /* _PFE_HIF_LIB_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_hw.c +@@ -0,0 +1,188 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include "pfe_mod.h" ++#include "pfe_hw.h" ++ ++/* Functions to handle most of pfe hw register initialization */ ++ ++int pfe_hw_init(struct pfe *pfe, int resume) ++{ ++ CLASS_CFG class_cfg = { ++ .pe_sys_clk_ratio = PE_SYS_CLK_RATIO, ++ .route_table_baseaddr = pfe->ddr_phys_baseaddr + ROUTE_TABLE_BASEADDR, ++ .route_table_hash_bits = ROUTE_TABLE_HASH_BITS, ++ }; ++ ++ TMU_CFG tmu_cfg = { ++ .pe_sys_clk_ratio = PE_SYS_CLK_RATIO, ++ .llm_base_addr = pfe->ddr_phys_baseaddr + TMU_LLM_BASEADDR, ++ .llm_queue_len = TMU_LLM_QUEUE_LEN, ++ }; ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ UTIL_CFG util_cfg = { ++ .pe_sys_clk_ratio = PE_SYS_CLK_RATIO, ++ }; ++#endif ++ ++ BMU_CFG bmu1_cfg = { ++ .baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR + BMU1_LMEM_BASEADDR), ++ .count = BMU1_BUF_COUNT, ++ .size = BMU1_BUF_SIZE, ++ }; ++ ++ BMU_CFG bmu2_cfg = { ++ .baseaddr = DDR_PHYS_TO_PFE(pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR), ++ .count = BMU2_BUF_COUNT, ++ .size = BMU2_BUF_SIZE, ++ }; ++ ++ GPI_CFG egpi1_cfg = { ++ .lmem_rtry_cnt = EGPI1_LMEM_RTRY_CNT, ++ .tmlf_txthres = EGPI1_TMLF_TXTHRES, ++ .aseq_len = EGPI1_ASEQ_LEN, ++ }; ++ ++ GPI_CFG egpi2_cfg = { ++ .lmem_rtry_cnt = EGPI2_LMEM_RTRY_CNT, ++ .tmlf_txthres = EGPI2_TMLF_TXTHRES, ++ .aseq_len = EGPI2_ASEQ_LEN, ++ }; ++ ++#if defined(CONFIG_PLATFORM_C2000) ++ GPI_CFG egpi3_cfg = { ++ .lmem_rtry_cnt = EGPI3_LMEM_RTRY_CNT, ++ .tmlf_txthres = EGPI3_TMLF_TXTHRES, ++ .aseq_len = EGPI3_ASEQ_LEN, ++ }; ++#endif ++ ++ GPI_CFG hgpi_cfg = { ++ .lmem_rtry_cnt = HGPI_LMEM_RTRY_CNT, ++ .tmlf_txthres = HGPI_TMLF_TXTHRES, ++ .aseq_len = HGPI_ASEQ_LEN, ++ }; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++#if defined(CONFIG_PLATFORM_LS1012A) && !defined(LS1012A_PFE_RESET_WA) ++ /* LS1012A needs this to make PE work correctly */ ++ writel(0x3, CLASS_PE_SYS_CLK_RATIO); ++ writel(0x3, TMU_PE_SYS_CLK_RATIO); ++ writel(0x3, UTIL_PE_SYS_CLK_RATIO); ++ udelay(10); ++#endif ++ ++ printk(KERN_INFO "CLASS version: %x\n", readl(CLASS_VERSION)); ++ printk(KERN_INFO "TMU version: %x\n", readl(TMU_VERSION)); ++ ++ printk(KERN_INFO "BMU1 version: %x\n", readl(BMU1_BASE_ADDR + BMU_VERSION)); ++ printk(KERN_INFO "BMU2 version: %x\n", readl(BMU2_BASE_ADDR + BMU_VERSION)); ++#if defined(CONFIG_PLATFORM_C2000) ++ printk(KERN_INFO "EMAC1 network cfg: %x\n", readl(EMAC1_BASE_ADDR + EMAC_NETWORK_CONFIG)); ++ printk(KERN_INFO "EMAC2 network cfg: %x\n", readl(EMAC2_BASE_ADDR + EMAC_NETWORK_CONFIG)); ++#if !defined(CONFIG_PLATFORM_PCI) ++ printk(KERN_INFO "EMAC3 network cfg: %x\n", readl(EMAC3_BASE_ADDR + EMAC_NETWORK_CONFIG)); ++#endif ++#else ++ //TODO print MTIP config ++#endif ++ ++ printk(KERN_INFO "EGPI1 version: %x\n", readl(EGPI1_BASE_ADDR + GPI_VERSION)); ++ printk(KERN_INFO "EGPI2 version: %x\n", readl(EGPI2_BASE_ADDR + GPI_VERSION)); ++#if !defined(CONFIG_PLATFORM_PCI) && !defined(CONFIG_PLATFORM_LS1012A) ++ printk(KERN_INFO "EGPI3 version: %x\n", readl(EGPI3_BASE_ADDR + GPI_VERSION)); ++#endif ++ printk(KERN_INFO "HGPI version: %x\n", readl(HGPI_BASE_ADDR + GPI_VERSION)); ++ ++#if !defined(CONFIG_PLATFORM_PCI) ++ printk(KERN_INFO "GPT version: %x\n", readl(CBUS_GPT_VERSION)); ++#endif ++ ++ printk(KERN_INFO "HIF version: %x\n", readl(HIF_VERSION)); ++ printk(KERN_INFO "HIF NOPCY version: %x\n", readl(HIF_NOCPY_VERSION)); ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ printk(KERN_INFO "UTIL version: %x\n", readl(UTIL_VERSION)); ++#endif ++ while(!(readl(TMU_CTRL) & ECC_MEM_INIT_DONE)) ; ++ ++ hif_rx_disable(); ++ hif_tx_disable(); ++ ++ bmu_init(BMU1_BASE_ADDR, &bmu1_cfg); ++ ++ printk(KERN_INFO "bmu_init(1) done\n"); ++ ++ bmu_init(BMU2_BASE_ADDR, &bmu2_cfg); ++ ++ printk(KERN_INFO "bmu_init(2) done\n"); ++ ++ class_cfg.resume = resume ? 1 : 0; ++ ++ class_init(&class_cfg); ++ ++ printk(KERN_INFO "class_init() done\n"); ++ ++ tmu_init(&tmu_cfg); ++ ++ printk(KERN_INFO "tmu_init() done\n"); ++#if !defined(CONFIG_UTIL_DISABLED) ++ util_init(&util_cfg); ++ ++ printk(KERN_INFO "util_init() done\n"); ++#endif ++ gpi_init(EGPI1_BASE_ADDR, &egpi1_cfg); ++ ++ printk(KERN_INFO "gpi_init(1) done\n"); ++ ++ gpi_init(EGPI2_BASE_ADDR, &egpi2_cfg); ++ ++ printk(KERN_INFO "gpi_init(2) done\n"); ++#if !defined(CONFIG_PLATFORM_PCI) && !defined(CONFIG_PLATFORM_LS1012A) ++ gpi_init(EGPI3_BASE_ADDR, &egpi3_cfg); ++ ++ printk(KERN_INFO "gpi_init(3) done\n"); ++#endif ++ gpi_init(HGPI_BASE_ADDR, &hgpi_cfg); ++ ++ printk(KERN_INFO "gpi_init(hif) done\n"); ++ ++ bmu_enable(BMU1_BASE_ADDR); ++ ++ printk(KERN_INFO "bmu_enable(1) done\n"); ++ ++ bmu_enable(BMU2_BASE_ADDR); ++ ++ printk(KERN_INFO "bmu_enable(2) done\n"); ++ ++ return 0; ++} ++ ++void pfe_hw_exit(struct pfe *pfe) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ bmu_disable(BMU1_BASE_ADDR); ++ bmu_reset(BMU1_BASE_ADDR); ++ ++ bmu_disable(BMU2_BASE_ADDR); ++ bmu_reset(BMU2_BASE_ADDR); ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_hw.h +@@ -0,0 +1,32 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_HW_H_ ++#define _PFE_HW_H_ ++ ++#if !defined(CONFIG_PLATFORM_PCI) ++#define PE_SYS_CLK_RATIO 1 /* SYS/AXI = 250MHz, HFE = 500MHz */ ++#else ++#define PE_SYS_CLK_RATIO 0 /* SYS = 40MHz, HFE = 40MHz */ ++#endif ++ ++int pfe_hw_init(struct pfe *pfe, int resume); ++void pfe_hw_exit(struct pfe *pfe); ++ ++#endif /* _PFE_HW_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c +@@ -0,0 +1,341 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++ ++#include "pfe_mod.h" ++ ++struct comcerto_pfe_platform_data pfe_platform_data; ++ ++ ++ ++static int pfe_get_gemac_if_proprties(struct device_node *parent, int port, int if_cnt, ++ struct comcerto_pfe_platform_data *pdata) ++{ ++ struct device_node *gem = NULL, *phy = NULL; ++ int size; ++ int ii = 0, phy_id = 0; ++ const u32 *addr; ++ const void *mac_addr; ++ ++ for (ii = 0; ii < if_cnt; ii++) { ++ gem = of_get_next_child(parent, gem); ++ if (!gem) ++ goto err; ++ addr = of_get_property(gem, "reg", &size); ++ if (addr && (be32_to_cpup(addr) == port)) ++ break; ++ } ++ ++ if (ii >= if_cnt) { ++ printk(KERN_ERR "%s:%d Failed to find interface = %d\n", __func__, __LINE__, if_cnt); ++ goto err; ++ } ++ ++ pdata->comcerto_eth_pdata[port].gem_id = port; ++ ++ mac_addr = of_get_mac_address(gem); ++ ++ if (mac_addr) { ++ memcpy(pdata->comcerto_eth_pdata[port].mac_addr, mac_addr, ETH_ALEN); ++ } ++ ++ if ((pdata->comcerto_eth_pdata[port].mii_config = of_get_phy_mode(gem)) < 0) ++ printk(KERN_ERR "%s:%d Incorrect Phy mode....\n", __func__, __LINE__); ++ ++ ++ addr = of_get_property(gem, "fsl,gemac-bus-id", &size); ++ if (!addr) ++ printk(KERN_ERR "%s:%d Invalid gemac-bus-id....\n", __func__, __LINE__); ++ else ++ pdata->comcerto_eth_pdata[port].bus_id = be32_to_cpup(addr); ++ ++ addr = of_get_property(gem, "fsl,gemac-phy-id", &size); ++ if (!addr) ++ printk(KERN_ERR "%s:%d Invalid gemac-phy-id....\n", __func__, __LINE__); ++ else ++ phy_id = pdata->comcerto_eth_pdata[port].phy_id = be32_to_cpup(addr); ++ ++ addr = of_get_property(gem, "fsl,mdio-mux-val", &size); ++ if (!addr) ++ printk(KERN_ERR "%s: Invalid mdio-mux-val....\n", __func__); ++ else ++ phy_id = pdata->comcerto_eth_pdata[port].mdio_muxval= be32_to_cpup(addr); ++ ++ ++ addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size); ++ if (!addr) ++ printk(KERN_ERR "%s:%d Invalid pfe-phy-if-flags....\n", __func__, __LINE__); ++ else ++ pdata->comcerto_eth_pdata[port].phy_flags = be32_to_cpup(addr); ++ ++ addr = of_get_property(gem, "fsl,pfe-gemac-mode", &size); ++ if (!addr) ++ printk(KERN_ERR "%s:%d Invalid pfe-gemac-mode....\n", __func__, __LINE__); ++ else ++ pdata->comcerto_eth_pdata[port].gemac_mode = be32_to_cpup(addr); ++ ++ ++ /* If PHY is enabled, read mdio properties */ ++ if (pdata->comcerto_eth_pdata[port].phy_flags & GEMAC_NO_PHY) ++ goto done; ++ ++ phy = of_get_next_child(gem, NULL); ++ ++ addr = of_get_property(phy, "reg", &size); ++ ++ if (!addr) ++ printk(KERN_ERR "%s:%d Invalid phy enable flag....\n", __func__, __LINE__); ++ else ++ pdata->comcerto_mdio_pdata[port].enabled = be32_to_cpup(addr); ++ ++ addr = of_get_property (phy, "fsl,mdio-phy-mask", &size); ++ if (!addr) ++ printk(KERN_ERR "%s:%d Unable to read mdio-phy-mask....\n", __func__, __LINE__); ++ else ++ pdata->comcerto_mdio_pdata[port].phy_mask= be32_to_cpup(addr); ++ pdata->comcerto_mdio_pdata[port].irq[0] = PHY_POLL; ++ ++done: ++ ++ return 0; ++ ++err: ++ return -1; ++} ++/** ++ * pfe_platform_probe - ++ * ++ * ++ */ ++static int pfe_platform_probe(struct platform_device *pdev) ++{ ++ struct resource res; ++ int ii, rc, interface_count = 0, size = 0; ++ const u32 *prop; ++ struct device_node *np; ++ ++ np = pdev->dev.of_node; ++ ++ if (!np) { ++ printk(KERN_ERR "Invalid device node\n"); ++ return -EINVAL; ++ } ++ ++ pfe = kzalloc(sizeof(struct pfe), GFP_KERNEL); ++ if (!pfe) { ++ rc = -ENOMEM; ++ goto err_alloc; ++ } ++ ++ platform_set_drvdata(pdev, pfe); ++ ++ dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); ++ ++ if (of_address_to_resource(np, 2, &res)) ++ { ++ rc = -ENOMEM; ++ printk(KERN_ERR "failed to get ddr resource\n"); ++ goto err_ddr; ++ } ++ ++ ++ pfe->ddr_phys_baseaddr = res.start; ++ pfe->ddr_size = resource_size(&res); ++ ++ //pfe->ddr_baseaddr = ioremap(res.start, resource_size(&res)); ++ pfe->ddr_baseaddr = phys_to_virt(res.start); ++ if (!pfe->ddr_baseaddr) { ++ printk(KERN_ERR "ioremap() ddr failed\n"); ++ rc = -ENOMEM; ++ goto err_ddr; ++ } ++ ++ /*printk("%s:%d : DDR Res : Phy addr:len = %x:%x Mapped addr : %x\n", __func__, __LINE__, ++ pfe->ddr_phys_baseaddr, pfe->ddr_size, pfe->ddr_baseaddr);*/ ++ ++ pfe->scfg = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,"fsl,pfe-scfg"); ++ if (IS_ERR(pfe->scfg)) { ++ dev_err(&pdev->dev, "No syscfg phandle specified\n"); ++ return PTR_ERR(pfe->scfg); ++ } ++ /*printk("%s scfg %p\n",__func__,pfe->scfg);*/ ++ ++ ++#if 1 ++ if (!(pfe->cbus_baseaddr = of_iomap(np, 1))) ++ { ++ rc = -ENOMEM; ++ printk(KERN_ERR "failed to get axi resource\n"); ++ goto err_axi; ++ } ++ ++ /*printk("%s:%d : AXI Mapped addr : %lx\n", __func__, __LINE__, pfe->cbus_baseaddr); ++ printk("%s:%d : AXI Mapped addr : phys %lx\n", __func__, __LINE__, virt_to_phys(pfe->cbus_baseaddr));*/ ++#else ++ ++ if (of_address_to_resource(np, 1, &res)) ++ { ++ rc = -ENOMEM; ++ printk(KERN_ERR "failed to get AXI resource\n"); ++ goto err_iram; ++ } ++ pfe->cbus_baseaddr = ioremap(res.start, resource_size(&res)); ++ if (!pfe->cbus_baseaddr) { ++ printk(KERN_INFO "ioremap() AXI failed %lx %x\n", res.start, resource_size(&res)); ++ rc = -ENOMEM; ++ goto err_iram; ++ } ++ printk("%s:%d : AXI Mapped addr : %x PHY addr = %x\n", __func__, __LINE__, pfe->cbus_baseaddr, res.start); ++#endif ++ ++ pfe->hif_irq = platform_get_irq(pdev, 0); ++ if (pfe->hif_irq < 0) { ++ printk(KERN_ERR "platform_get_irq_byname(hif) failed\n"); ++ rc = pfe->hif_irq; ++ goto err_hif_irq; ++ } ++ /*printk("hif_irq: %d \n", pfe->hif_irq);*/ ++ ++ /* Read interface count */ ++ prop = of_get_property(np, "fsl,pfe-num-interfaces", &size); ++ if (!prop) { ++ printk(KERN_ERR "Failed to read number of interfaces\n"); ++ rc = -ENXIO; ++ goto err_prop; ++ } ++ ++ interface_count = be32_to_cpup(prop); ++ /*printk(KERN_INFO "%s:%d Number of interfaces : %d\n", __func__, __LINE__, interface_count);*/ ++ if (interface_count <= 0) { ++ printk(KERN_ERR "No ethernet interface count : %d\n", interface_count); ++ rc = -ENXIO; ++ goto err_prop; ++ } ++ ++ for (ii = 0; ii < interface_count; ii++) { ++ pfe_get_gemac_if_proprties(np, ii, interface_count, &pfe_platform_data); ++ } ++ ++ ++ pfe->dev = &pdev->dev; ++ ++ pfe->dev->platform_data = &pfe_platform_data; ++ ++ //FIXME get the correct clock from dts ++ pfe->ctrl.sys_clk = 250000; // save sys_clk value as KHz ++ ++ rc = pfe_probe(pfe); ++ if (rc < 0) ++ goto err_probe; ++ ++ return 0; ++ ++err_probe: ++err_prop: ++ /*TODO complet the code */ ++err_hif_irq: ++ iounmap(pfe->cbus_baseaddr); ++ ++err_axi: ++ iounmap(pfe->ddr_baseaddr); ++ ++err_ddr: ++ platform_set_drvdata(pdev, NULL); ++ ++ kfree(pfe); ++ ++err_alloc: ++ return rc; ++} ++ ++ ++/** ++ * pfe_platform_remove - ++ * ++ * ++ */ ++static int pfe_platform_remove(struct platform_device *pdev) ++{ ++ struct pfe *pfe = platform_get_drvdata(pdev); ++ int rc; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ rc = pfe_remove(pfe); ++ ++ iounmap(pfe->cbus_baseaddr); ++ iounmap(pfe->ddr_baseaddr); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ kfree(pfe); ++ ++ return rc; ++} ++ ++static struct of_device_id pfe_match[] = { ++ { ++ .compatible = "fsl,pfe", ++ }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, pfe_match); ++ ++static struct platform_driver pfe_platform_driver = { ++ .probe = pfe_platform_probe, ++ .remove = pfe_platform_remove, ++ .driver = { ++ .name = "pfe", ++ .of_match_table = pfe_match, ++ }, ++}; ++ ++#if 0 ++static int __init pfe_module_init(void) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ return platform_driver_register(&pfe_platform_driver); ++} ++ ++ ++static void __exit pfe_module_exit(void) ++{ ++ platform_driver_unregister(&pfe_platform_driver); ++ ++ printk(KERN_INFO "%s\n", __func__); ++} ++module_init(pfe_module_init); ++module_exit(pfe_module_exit); ++#endif ++ ++module_platform_driver(pfe_platform_driver); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("PFE Ethernet driver"); ++MODULE_AUTHOR("NXP DNCPE"); +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_mod.c +@@ -0,0 +1,140 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include "pfe_mod.h" ++ ++struct pfe *pfe; ++ ++/** ++ * pfe_probe - ++ * ++ * ++ */ ++int pfe_probe(struct pfe *pfe) ++{ ++ int rc; ++ ++ ++ if (DDR_MAX_SIZE > pfe->ddr_size) { ++ printk(KERN_ERR "%s: required DDR memory (%x) above platform ddr memory (%x)\n", __func__, DDR_MAX_SIZE, pfe->ddr_size); ++ rc = -ENOMEM; ++ goto err_hw; ++ } ++ ++ if (((int) (pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR) & (8*SZ_1M - 1)) != 0) { ++ printk(KERN_ERR "%s: BMU2 base address (0x%x) must be aligned on 8MB boundary\n", __func__, (int) pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR); ++ rc = -ENOMEM; ++ goto err_hw; ++ } ++ ++ ++ printk(KERN_INFO "cbus_baseaddr: %lx, ddr_baseaddr: %lx, ddr_phys_baseaddr: %lx, ddr_size: %x\n", ++ (unsigned long)pfe->cbus_baseaddr, (unsigned long)pfe->ddr_baseaddr, ++ pfe->ddr_phys_baseaddr, pfe->ddr_size); ++ ++ pfe_lib_init(pfe->cbus_baseaddr, pfe->ddr_baseaddr, pfe->ddr_phys_baseaddr, pfe->ddr_size); ++ ++ rc = pfe_hw_init(pfe, 0); ++ if (rc < 0) ++ goto err_hw; ++ ++ rc = pfe_hif_lib_init(pfe); ++ if (rc < 0) ++ goto err_hif_lib; ++ ++ rc = pfe_hif_init(pfe); ++ if (rc < 0) ++ goto err_hif; ++ ++ rc = pfe_firmware_init(pfe); ++ if (rc < 0) ++ goto err_firmware; ++ ++ rc = pfe_ctrl_init(pfe); ++ if (rc < 0) ++ goto err_ctrl; ++ ++ rc = pfe_eth_init(pfe); ++ if (rc < 0) ++ goto err_eth; ++ ++ rc = pfe_sysfs_init(pfe); ++ if(rc < 0) ++ goto err_sysfs; ++ ++ rc = pfe_debugfs_init(pfe); ++ if (rc < 0) ++ goto err_debugfs; ++ ++ return 0; ++ ++err_debugfs: ++ pfe_sysfs_exit(pfe); ++ ++err_sysfs: ++ pfe_eth_exit(pfe); ++ ++err_eth: ++ pfe_ctrl_exit(pfe); ++ ++err_ctrl: ++ pfe_firmware_exit(pfe); ++ ++err_firmware: ++ pfe_hif_exit(pfe); ++ ++err_hif: ++ pfe_hif_lib_exit(pfe); ++ ++err_hif_lib: ++ pfe_hw_exit(pfe); ++ ++err_hw: ++ return rc; ++} ++ ++ ++/** ++ * pfe_remove - ++ * ++ * ++ */ ++int pfe_remove(struct pfe *pfe) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ pfe_debugfs_exit(pfe); ++ ++ pfe_sysfs_exit(pfe); ++ ++ pfe_eth_exit(pfe); ++ ++ pfe_ctrl_exit(pfe); ++ ++ pfe_firmware_exit(pfe); ++ ++ pfe_hif_exit(pfe); ++ ++ pfe_hif_lib_exit(pfe); ++ ++ pfe_hw_exit(pfe); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_mod.h +@@ -0,0 +1,163 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_MOD_H_ ++#define _PFE_MOD_H_ ++ ++#include ++#include ++ ++struct pfe; ++ ++#include "config.h" ++#include "pfe_hw.h" ++#include "pfe_firmware.h" ++#include "pfe_ctrl.h" ++#include "pfe_hif.h" ++#include "pfe_hif_lib.h" ++#include "pfe_eth.h" ++#include "pfe_sysfs.h" ++#include "pfe_perfmon.h" ++#include "pfe_debugfs.h" ++ ++struct pfe_tmu_credit { ++ /* Number of allowed TX packet in-flight, matches TMU queue size */ ++ unsigned int tx_credit[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT]; ++ unsigned int tx_credit_max[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT]; ++ unsigned int tx_packets[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT]; ++}; ++ ++struct pfe { ++ struct regmap *scfg; ++ unsigned long ddr_phys_baseaddr; ++ void *ddr_baseaddr; ++ unsigned int ddr_size; ++ void *cbus_baseaddr; ++ void *apb_baseaddr; ++ unsigned long iram_phys_baseaddr; ++ void *iram_baseaddr; ++ unsigned long ipsec_phys_baseaddr; ++ void *ipsec_baseaddr; ++ int hif_irq; ++ int hif_client_irq; ++ struct device *dev; ++ struct dentry *dentry; ++ struct pfe_ctrl ctrl; ++ struct pfe_hif hif; ++ struct pfe_eth eth; ++ struct hif_client_s *hif_client[HIF_CLIENTS_MAX]; ++#if defined(CFG_DIAGS) ++ struct pfe_diags diags; ++#endif ++ struct pfe_tmu_credit tmu_credit; ++ struct pfe_cpumon cpumon; ++ struct pfe_memmon memmon; ++ int wake; ++ struct clk * hfe_clock; ++}; ++ ++extern struct pfe *pfe; ++ ++int pfe_probe(struct pfe *pfe); ++int pfe_remove(struct pfe *pfe); ++ ++#ifndef SZ_1K ++#define SZ_1K 1024 ++#endif ++ ++#ifndef SZ_1M ++#define SZ_1M (1024 * 1024) ++#endif ++ ++/* DDR Mapping */ ++#if !defined(CONFIG_PLATFORM_PCI) ++#define ROUTE_TABLE_BASEADDR 0 ++#define ROUTE_TABLE_HASH_BITS 15 /**< 32K entries */ ++#define ROUTE_TABLE_SIZE ((1 << ROUTE_TABLE_HASH_BITS) * CLASS_ROUTE_SIZE) ++#define BMU2_DDR_BASEADDR (ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE) ++#define BMU2_BUF_COUNT (4096 - 256) /**< This is to get a total DDR size of 12MiB */ ++#define BMU2_DDR_SIZE (DDR_BUF_SIZE * BMU2_BUF_COUNT) ++#define UTIL_CODE_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE) ++#define UTIL_CODE_SIZE (128 * SZ_1K) ++#define UTIL_DDR_DATA_BASEADDR (UTIL_CODE_BASEADDR + UTIL_CODE_SIZE) ++#define UTIL_DDR_DATA_SIZE (64 * SZ_1K) ++#define CLASS_DDR_DATA_BASEADDR (UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE) ++#define CLASS_DDR_DATA_SIZE (32 * SZ_1K) ++#define TMU_DDR_DATA_BASEADDR (CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE) ++#define TMU_DDR_DATA_SIZE (32 * SZ_1K) ++#define TMU_LLM_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE) ++#define TMU_LLM_QUEUE_LEN (8 * 512) /**< Must be power of two and at least 16 * 8 = 128 bytes */ ++#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN) /**< (4 TMU's x 16 queues x queue_len) */ ++ ++#define DDR_MAX_SIZE (TMU_LLM_BASEADDR + TMU_LLM_SIZE) ++ ++#else ++ ++#define UTIL_CODE_BASEADDR 0 ++#if defined(CONFIG_UTIL_DISABLED) ++#define UTIL_CODE_SIZE (0 * SZ_1K) ++#else ++#define UTIL_CODE_SIZE (8 * SZ_1K) ++#endif ++#define UTIL_DDR_DATA_BASEADDR (UTIL_CODE_BASEADDR + UTIL_CODE_SIZE) ++#define UTIL_DDR_DATA_SIZE (0 * SZ_1K) ++#define CLASS_DDR_DATA_BASEADDR (UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE) ++#define CLASS_DDR_DATA_SIZE (0 * SZ_1K) ++#define TMU_DDR_DATA_BASEADDR (CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE) ++#define TMU_DDR_DATA_SIZE (0 * SZ_1K) ++#define ROUTE_TABLE_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE) ++#define ROUTE_TABLE_HASH_BITS 5 /**< 32 entries */ ++#define ROUTE_TABLE_SIZE ((1 << ROUTE_TABLE_HASH_BITS) * CLASS_ROUTE_SIZE) ++#define BMU2_DDR_BASEADDR (ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE) ++#define BMU2_BUF_COUNT 16 ++#define BMU2_DDR_SIZE (DDR_BUF_SIZE * BMU2_BUF_COUNT) ++#define TMU_LLM_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE) ++#define TMU_LLM_QUEUE_LEN (16 * 8) /**< Must be power of two and at least 16 * 8 = 128 bytes */ ++#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN) /**< (4 TMU's x 16 queues x queue_len) */ ++#define HIF_DESC_BASEADDR (TMU_LLM_BASEADDR + TMU_LLM_SIZE) ++#define HIF_RX_DESC_SIZE (16*HIF_RX_DESC_NT) ++#define HIF_TX_DESC_SIZE (16*HIF_TX_DESC_NT) ++#define HIF_DESC_SIZE (HIF_RX_DESC_SIZE + HIF_TX_DESC_SIZE) ++#define HIF_RX_PKT_DDR_BASEADDR (HIF_DESC_BASEADDR + HIF_DESC_SIZE) ++#define HIF_RX_PKT_DDR_SIZE (HIF_RX_DESC_NT * DDR_BUF_SIZE) ++#define HIF_TX_PKT_DDR_BASEADDR (HIF_RX_PKT_DDR_BASEADDR + HIF_RX_PKT_DDR_SIZE) ++#define HIF_TX_PKT_DDR_SIZE (HIF_TX_DESC_NT * DDR_BUF_SIZE) ++#define ROUTE_BASEADDR (HIF_TX_PKT_DDR_BASEADDR + HIF_TX_PKT_DDR_SIZE) ++#define ROUTE_SIZE (2 * CLASS_ROUTE_SIZE) ++ ++#define DDR_MAX_SIZE (ROUTE_BASEADDR + ROUTE_SIZE) ++ ++#define PFE_HOST_TO_PCI(addr) (((u32)addr)- ((u32)DDR_BASE_ADDR)) ++#define PFE_PCI_TO_HOST(addr) (((u32)addr)+ ((u32)DDR_BASE_ADDR)) ++#endif ++ ++/* IRAM Mapping */ ++#define IPSEC_IRAM_BASEADDR 0 ++#define IPSEC_IRAM_SIZE 0x2000 ++ ++/* LMEM Mapping */ ++#define BMU1_LMEM_BASEADDR 0 ++#define BMU1_BUF_COUNT 256 ++#define BMU1_LMEM_SIZE (LMEM_BUF_SIZE * BMU1_BUF_COUNT) ++#define IPSEC_LMEM_BASEADDR (BMU1_LMEM_BASEADDR + BMU1_LMEM_SIZE) ++#define IPSEC_LMEM_SIZE (30 * 1024) ++ ++ ++ ++#endif /* _PFE_MOD_H */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_perfmon.c +@@ -0,0 +1,175 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++/* PFE performance monitoring functions */ ++ ++#include "pfe_ctrl_hal.h" ++#include "pfe_perfmon.h" ++ ++static TIMER_ENTRY cpumon_timer; ++ ++u32 CLASS_DMEM_SH2(cpu_ticks[2]); ++u32 TMU_DMEM_SH2(cpu_ticks[2]); ++#if !defined(CONFIG_UTIL_DISABLED) ++u32 UTIL_DMEM_SH2(cpu_ticks[2]); ++#endif ++ ++#define compute_active_pct(total_ticks, active_ticks) ((active_ticks * 100 + (total_ticks >> 1)) / total_ticks) ++ ++static void cpumon_timer_handler(void) ++{ ++ int id; ++ u32 dmem_addr; ++ u32 ticks[2]; ++ u32 total, active; ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ struct pfe_cpumon *cpumon = &pfe->cpumon; ++ ++ // Process class PE's ++ total = active = 0; ++ dmem_addr = virt_to_class_dmem(&class_cpu_ticks[0]); ++ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) ++ { ++ cpumon->cpu_usage_pct[id] = 0; ++ if (pe_sync_stop(ctrl, (1 << id)) < 0) ++ continue; ++ ticks[0] = be32_to_cpu(pe_dmem_read(id, dmem_addr, 4)); ++ ticks[1] = be32_to_cpu(pe_dmem_read(id, dmem_addr + 4, 4)); ++ pe_dmem_write(id, 0, dmem_addr, 4); ++ pe_dmem_write(id, 0, dmem_addr + 4, 4); ++ pe_start(ctrl, (1 << id)); ++ ticks[0] >>= 8; // divide both values by 256, so multiply by 100 won't overflow ++ ticks[1] >>= 8; ++ total += ticks[0]; ++ active += ticks[1]; ++ if (ticks[0] != 0) ++ cpumon->cpu_usage_pct[id] = compute_active_pct(ticks[0], ticks[1]); ++ } ++ if (total != 0) ++ cpumon->class_usage_pct = compute_active_pct(total, active); ++ else ++ cpumon->class_usage_pct = 0; ++ ++ // Process TMU PE's ++ total = active = 0; ++ dmem_addr = virt_to_tmu_dmem(&tmu_cpu_ticks[0]); ++ for (id = TMU0_ID; id <= TMU_MAX_ID; id++) ++ { ++#if defined(CONFIG_PLATFORM_LS1012A) ++ if(id == TMU2_ID) continue; ++#endif ++ cpumon->cpu_usage_pct[id] = 0; ++ if (pe_sync_stop(ctrl, (1 << id)) < 0) ++ continue; ++ ticks[0] = be32_to_cpu(pe_dmem_read(id, dmem_addr, 4)); ++ ticks[1] = be32_to_cpu(pe_dmem_read(id, dmem_addr + 4, 4)); ++ pe_dmem_write(id, 0, dmem_addr, 4); ++ pe_dmem_write(id, 0, dmem_addr + 4, 4); ++ pe_start(ctrl, (1 << id)); ++ ticks[0] >>= 8; // divide both values by 256, so multiply by 100 won't overflow ++ ticks[1] >>= 8; ++ if (ticks[0] != 0) ++ cpumon->cpu_usage_pct[id] = compute_active_pct(ticks[0], ticks[1]); ++ } ++#if !defined(CONFIG_UTIL_DISABLED) ++ // Process Util PE ++ dmem_addr = virt_to_util_dmem(&util_cpu_ticks[0]); ++ cpumon->cpu_usage_pct[UTIL_ID] = 0; ++ if (pe_sync_stop(ctrl, (1 << UTIL_ID)) < 0) ++ return; ++ ticks[0] = be32_to_cpu(pe_dmem_read(UTIL_ID, dmem_addr, 4)); ++ ticks[1] = be32_to_cpu(pe_dmem_read(UTIL_ID, dmem_addr + 4, 4)); ++ pe_dmem_write(UTIL_ID, 0, dmem_addr, 4); ++ pe_dmem_write(UTIL_ID, 0, dmem_addr + 4, 4); ++ pe_start(ctrl, (1 << UTIL_ID)); ++ ticks[0] >>= 8; // divide both values by 256, so multiply by 100 won't overflow ++ ticks[1] >>= 8; ++ if (ticks[0] != 0) ++ cpumon->cpu_usage_pct[UTIL_ID] = compute_active_pct(ticks[0], ticks[1]); ++#endif ++} ++ ++static int pfe_cpumon_init(struct pfe *pfe) ++{ ++ timer_init(&cpumon_timer, cpumon_timer_handler); ++ timer_add(&cpumon_timer, CT_CPUMON_INTERVAL); ++ return 0; ++} ++ ++static void pfe_cpumon_exit(struct pfe *pfe) ++{ ++ timer_del(&cpumon_timer); ++} ++ ++ ++/*********************************************************************************/ ++ ++// Memory monitor functions ++ ++void * pfe_kmalloc(size_t size, int flags) ++{ ++ struct pfe_memmon *memmon = &pfe->memmon; ++ void *ptr; ++ ptr = kmalloc(size, flags); ++ if (ptr) ++ memmon->kernel_memory_allocated += ksize(ptr); ++ return ptr; ++} ++ ++void * pfe_kzalloc(size_t size, int flags) ++{ ++ struct pfe_memmon *memmon = &pfe->memmon; ++ void *ptr; ++ ptr = kzalloc(size, flags); ++ if (ptr) ++ memmon->kernel_memory_allocated += ksize(ptr); ++ return ptr; ++} ++ ++void pfe_kfree(void *ptr) ++{ ++ struct pfe_memmon *memmon = &pfe->memmon; ++ memmon->kernel_memory_allocated -= ksize(ptr); ++ kfree(ptr); ++} ++ ++static int pfe_memmon_init(struct pfe *pfe) ++{ ++ return 0; ++} ++ ++static void pfe_memmon_exit(struct pfe *pfe) ++{ ++} ++ ++/*********************************************************************************/ ++ ++ ++int pfe_perfmon_init(struct pfe *pfe) ++{ ++ pfe_cpumon_init(pfe); ++ pfe_memmon_init(pfe); ++ return 0; ++} ++ ++void pfe_perfmon_exit(struct pfe *pfe) ++{ ++ pfe_cpumon_exit(pfe); ++ pfe_memmon_exit(pfe); ++} +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_perfmon.h +@@ -0,0 +1,41 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_PERFMON_H_ ++#define _PFE_PERFMON_H_ ++ ++#define CT_CPUMON_INTERVAL (1 * TIMER_TICKS_PER_SEC) ++ ++struct pfe_cpumon { ++ u32 cpu_usage_pct[MAX_PE]; ++ u32 class_usage_pct; ++}; ++ ++struct pfe_memmon { ++ u32 kernel_memory_allocated; ++}; ++ ++void * pfe_kmalloc(size_t size, int flags); ++void * pfe_kzalloc(size_t size, int flags); ++void pfe_kfree(void *ptr); ++ ++int pfe_perfmon_init(struct pfe *pfe); ++void pfe_perfmon_exit(struct pfe *pfe); ++ ++#endif /* _PFE_PERFMON_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_platform.c +@@ -0,0 +1,358 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#include "pfe_mod.h" ++ ++/** ++ * pfe_platform_probe - ++ * ++ * ++ */ ++static int pfe_platform_probe(struct platform_device *pdev) ++{ ++ struct resource *r; ++ int rc; ++ struct clk *clk_axi; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ pfe = kzalloc(sizeof(struct pfe), GFP_KERNEL); ++ if (!pfe) { ++ rc = -ENOMEM; ++ goto err_alloc; ++ } ++ ++ platform_set_drvdata(pdev, pfe); ++ ++ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ddr"); ++ if (!r) { ++ printk(KERN_INFO "platform_get_resource_byname(ddr) failed\n"); ++ rc = -ENXIO; ++ goto err_ddr; ++ } ++ ++ pfe->ddr_phys_baseaddr = r->start; ++ pfe->ddr_size = resource_size(r); ++ ++ pfe->ddr_baseaddr = ioremap(r->start, resource_size(r)); ++ if (!pfe->ddr_baseaddr) { ++ printk(KERN_INFO "ioremap() ddr failed\n"); ++ rc = -ENOMEM; ++ goto err_ddr; ++ } ++ ++ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "axi"); ++ if (!r) { ++ printk(KERN_INFO "platform_get_resource_byname(axi) failed\n"); ++ rc = -ENXIO; ++ goto err_axi; ++ } ++ ++ pfe->cbus_baseaddr = ioremap(r->start, resource_size(r)); ++ if (!pfe->cbus_baseaddr) { ++ printk(KERN_INFO "ioremap() axi failed\n"); ++ rc = -ENOMEM; ++ goto err_axi; ++ } ++ ++ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apb"); ++ if (!r) { ++ printk(KERN_INFO "platform_get_resource_byname(apb) failed\n"); ++ rc = -ENXIO; ++ goto err_apb; ++ } ++ ++ pfe->apb_baseaddr = ioremap(r->start, resource_size(r)); ++ if (!pfe->apb_baseaddr) { ++ printk(KERN_INFO "ioremap() apb failed\n"); ++ rc = -ENOMEM; ++ goto err_apb; ++ } ++ ++ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "iram"); ++ if (!r) { ++ printk(KERN_INFO "platform_get_resource_byname(iram) failed\n"); ++ rc = -ENXIO; ++ goto err_iram; ++ } ++ ++ pfe->iram_phys_baseaddr = r->start; ++ pfe->iram_baseaddr = ioremap(r->start, resource_size(r)); ++ if (!pfe->iram_baseaddr) { ++ printk(KERN_INFO "ioremap() iram failed\n"); ++ rc = -ENOMEM; ++ goto err_iram; ++ } ++ ++ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ipsec"); ++ if (!r) { ++ printk(KERN_INFO "platform_get_resource_byname(ipsec) failed\n"); ++ rc = -ENXIO; ++ goto err_ipsec; ++ } ++ ++ pfe->ipsec_phys_baseaddr = r->start; ++ /* Just map only initial 1MB , as its enough to access espah engine ++ */ ++ //pfe->ipsec_baseaddr = ioremap(r->start, resource_size(r)); ++ pfe->ipsec_baseaddr = ioremap(r->start, 1*1024*1024); ++ if (!pfe->ipsec_baseaddr) { ++ printk(KERN_INFO "ioremap() ipsec failed\n"); ++ rc = -ENOMEM; ++ goto err_ipsec; ++ } ++ ++ printk(KERN_INFO "ipsec: baseaddr :%x --- %x\n", (u32)pfe->ipsec_phys_baseaddr, (u32)pfe->ipsec_baseaddr); ++ ++ pfe->hif_irq = platform_get_irq_byname(pdev, "hif"); ++ if (pfe->hif_irq < 0) { ++ printk(KERN_INFO "platform_get_irq_byname(hif) failed\n"); ++ rc = pfe->hif_irq; ++ goto err_hif_irq; ++ } ++ ++#if 0 ++ pfe->hif_client_irq = platform_get_irq_byname(pdev, "hif_client"); ++ if (pfe->hif_client_irq < 0) { ++ printk(KERN_INFO "platform_get_irq_byname(hif_client) failed\n"); ++ rc = pfe->hif_client_irq; ++ goto err_hif_irq; ++ } ++#endif ++ ++ pfe->dev = &pdev->dev; ++ ++ ++ /* Get the system clock */ ++ clk_axi = clk_get(NULL,"axi"); ++ if (IS_ERR(clk_axi)) { ++ printk(KERN_INFO "clk_get call failed\n"); ++ rc = -ENXIO; ++ goto err_clk; ++ } ++ ++ /* HFE core clock */ ++ pfe->hfe_clock = clk_get(NULL, "hfe_core"); ++ if (IS_ERR(pfe->hfe_clock)) { ++ printk(KERN_INFO "clk_get call failed\n"); ++ rc = -ENXIO; ++ goto err_hfe_clock; ++ } ++ ++ clk_disable(pfe->hfe_clock); ++ c2000_block_reset(COMPONENT_PFE_SYS, 1); ++ mdelay(1); ++ c2000_block_reset(COMPONENT_PFE_SYS, 0); ++ clk_enable(pfe->hfe_clock); ++ ++ pfe->ctrl.clk_axi = clk_axi; ++ pfe->ctrl.sys_clk = clk_get_rate(clk_axi) / 1000; // save sys_clk value as KHz ++ ++ rc = pfe_probe(pfe); ++ if (rc < 0) ++ goto err_probe; ++ ++ return 0; ++ ++err_probe: ++ clk_put(pfe->hfe_clock); ++err_hfe_clock: ++ clk_put(clk_axi); ++err_clk: ++err_hif_irq: ++ iounmap(pfe->ipsec_baseaddr); ++err_ipsec: ++ iounmap(pfe->iram_baseaddr); ++err_iram: ++ iounmap(pfe->apb_baseaddr); ++ ++err_apb: ++ iounmap(pfe->cbus_baseaddr); ++ ++err_axi: ++ iounmap(pfe->ddr_baseaddr); ++ ++err_ddr: ++ platform_set_drvdata(pdev, NULL); ++ ++ kfree(pfe); ++ ++err_alloc: ++ return rc; ++} ++ ++ ++/** ++ * pfe_platform_remove - ++ * ++ * ++ */ ++static int pfe_platform_remove(struct platform_device *pdev) ++{ ++ struct pfe *pfe = platform_get_drvdata(pdev); ++ int rc; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ rc = pfe_remove(pfe); ++ ++ c2000_block_reset(COMPONENT_PFE_SYS, 1); ++ clk_disable(pfe->hfe_clock); ++ clk_put(pfe->hfe_clock); ++ clk_put(pfe->ctrl.clk_axi); ++ iounmap(pfe->ipsec_baseaddr); ++ iounmap(pfe->iram_baseaddr); ++ iounmap(pfe->apb_baseaddr); ++ iounmap(pfe->cbus_baseaddr); ++ iounmap(pfe->ddr_baseaddr); ++ ++ platform_set_drvdata(pdev, NULL); ++ ++ kfree(pfe); ++ ++ return rc; ++} ++ ++#ifdef CONFIG_PM ++ ++#ifdef CONFIG_PM_SLEEP ++static int pfe_platform_suspend(struct device *dev) ++{ ++ struct pfe *pfe = platform_get_drvdata(to_platform_device(dev)); ++ struct net_device *netdev; ++ int i; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ pfe->wake = 0; ++ ++ for (i = 0; i < (NUM_GEMAC_SUPPORT - 1); i++ ) { ++ netdev = pfe->eth.eth_priv[i]->dev; ++ ++ netif_device_detach(netdev); ++ ++ if (netif_running(netdev)) ++ if(pfe_eth_suspend(netdev)) ++ pfe->wake =1; ++ } ++ ++ /* Shutdown PFE only if we're not waking up the system */ ++ if (!pfe->wake) { ++ pfe_ctrl_suspend(&pfe->ctrl); ++ pfe_hif_exit(pfe); ++ pfe_hif_lib_exit(pfe); ++ ++ class_disable(); ++ tmu_disable(0xf); ++#if !defined(CONFIG_UTIL_DISABLED) ++ util_disable(); ++#endif ++ pfe_hw_exit(pfe); ++ c2000_block_reset(COMPONENT_PFE_SYS, 1); ++ clk_disable(pfe->hfe_clock); ++ } ++ ++ return 0; ++} ++ ++static int pfe_platform_resume(struct device *dev) ++{ ++ struct pfe *pfe = platform_get_drvdata(to_platform_device(dev)); ++ struct net_device *netdev; ++ int i; ++ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ if (!pfe->wake) { ++ /* Sequence follows VLSI recommendation (bug 71927) */ ++ c2000_block_reset(COMPONENT_PFE_SYS, 1); ++ mdelay(1); ++ c2000_block_reset(COMPONENT_PFE_SYS, 0); ++ clk_enable(pfe->hfe_clock); ++ ++ pfe_hw_init(pfe, 1); ++ pfe_hif_lib_init(pfe); ++ pfe_hif_init(pfe); ++#if !defined(CONFIG_UTIL_DISABLED) ++ util_enable(); ++#endif ++ tmu_enable(0xf); ++ class_enable(); ++ pfe_ctrl_resume(&pfe->ctrl); ++ } ++ ++ for(i = 0; i < (NUM_GEMAC_SUPPORT - 1); i++) { ++ netdev = pfe->eth.eth_priv[i]->dev; ++ ++ if (pfe->eth.eth_priv[i]->mii_bus) ++ pfe_eth_mdio_reset(pfe->eth.eth_priv[i]->mii_bus); ++ ++ if (netif_running(netdev)) ++ pfe_eth_resume(netdev); ++ ++ netif_device_attach(netdev); ++ } ++ return 0; ++} ++#else ++#define pfe_platform_suspend NULL ++#define pfe_platform_resume NULL ++#endif ++ ++static const struct dev_pm_ops pfe_platform_pm_ops = { ++ SET_SYSTEM_SLEEP_PM_OPS(pfe_platform_suspend, pfe_platform_resume) ++}; ++ ++#endif ++ ++static struct platform_driver pfe_platform_driver = { ++ .probe = pfe_platform_probe, ++ .remove = pfe_platform_remove, ++ .driver = { ++ .name = "pfe", ++#ifdef CONFIG_PM ++ .pm = &pfe_platform_pm_ops, ++#endif ++ }, ++}; ++ ++ ++static int __init pfe_module_init(void) ++{ ++ printk(KERN_INFO "%s\n", __func__); ++ ++ return platform_driver_register(&pfe_platform_driver); ++} ++ ++ ++static void __exit pfe_module_exit(void) ++{ ++ platform_driver_unregister(&pfe_platform_driver); ++ ++ printk(KERN_INFO "%s\n", __func__); ++} ++ ++MODULE_LICENSE("GPL"); ++module_init(pfe_module_init); ++module_exit(pfe_module_exit); +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c +@@ -0,0 +1,855 @@ ++/* ++ * (C) Copyright 2011 ++ * Author : Freescale Semiconductor, Inc. ++ * ++ * See file CREDITS for list of people who contributed to this ++ * project. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of ++ * the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++ * MA 02111-1307 USA ++ * */ ++ ++#include ++#include ++ ++#include "pfe_mod.h" ++#include "pfe_ctrl_hal.h" ++ ++#define PE_EXCEPTION_DUMP_ADDRESS 0x1fa8 ++#define NUM_QUEUES 16 ++ ++static char register_name[20][5] = { ++ "EPC", "ECAS", "EID", "ED", ++ "r0", "r1", "r2", "r3", ++ "r4", "r5", "r6", "r7", ++ "r8", "r9", "r10", "r11", ++ "r12", "r13", "r14", "r15", ++}; ++ ++static char exception_name[14][20] = { ++ "Reset", ++ "HardwareFailure", ++ "NMI", ++ "InstBreakpoint", ++ "DataBreakpoint", ++ "Unsupported", ++ "PrivilegeViolation", ++ "InstBusError", ++ "DataBusError", ++ "AlignmentError", ++ "ArithmeticError", ++ "SystemCall", ++ "MemoryManagement", ++ "Interrupt", ++}; ++ ++static unsigned long class_do_clear = 0; ++static unsigned long tmu_do_clear = 0; ++#if !defined(CONFIG_UTIL_DISABLED) ++static unsigned long util_do_clear = 0; ++#endif ++ ++u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset); ++ ++static ssize_t display_pe_status(char *buf, int id, u32 dmem_addr, unsigned long do_clear) ++{ ++ ssize_t len = 0; ++ u32 val; ++ char statebuf[5]; ++ struct pfe_cpumon *cpumon = &pfe->cpumon; ++ u32 debug_indicator; ++ u32 debug[20]; ++ ++ *(u32 *)statebuf = pe_dmem_read(id, dmem_addr, 4); ++ dmem_addr += 4; ++ ++ statebuf[4] = '\0'; ++ len += sprintf(buf + len, "state=%4s ", statebuf); ++ ++ val = pe_dmem_read(id, dmem_addr, 4); ++ dmem_addr += 4; ++ len += sprintf(buf + len, "ctr=%08x ", cpu_to_be32(val)); ++ ++ val = pe_dmem_read(id, dmem_addr, 4); ++ if (do_clear && val) ++ pe_dmem_write(id, 0, dmem_addr, 4); ++ dmem_addr += 4; ++ len += sprintf(buf + len, "rx=%u ", cpu_to_be32(val)); ++ ++ val = pe_dmem_read(id, dmem_addr, 4); ++ if (do_clear && val) ++ pe_dmem_write(id, 0, dmem_addr, 4); ++ dmem_addr += 4; ++ if (id >= TMU0_ID && id <= TMU_MAX_ID) ++ len += sprintf(buf + len, "qstatus=%x", cpu_to_be32(val)); ++ else ++ len += sprintf(buf + len, "tx=%u", cpu_to_be32(val)); ++ ++ val = pe_dmem_read(id, dmem_addr, 4); ++ if (do_clear && val) ++ pe_dmem_write(id, 0, dmem_addr, 4); ++ dmem_addr += 4; ++ if (val) ++ len += sprintf(buf + len, " drop=%u", cpu_to_be32(val)); ++ ++ len += sprintf(buf + len, " load=%d%%", cpumon->cpu_usage_pct[id]); ++ ++ len += sprintf(buf + len, "\n"); ++ ++ debug_indicator = pe_dmem_read(id, dmem_addr, 4); ++ dmem_addr += 4; ++ if (!strncmp((char *)&debug_indicator, "DBUG", 4)) ++ { ++ int j, last = 0; ++ for (j = 0; j < 16; j++) ++ { ++ debug[j] = pe_dmem_read(id, dmem_addr, 4); ++ if (debug[j]) ++ { ++ if (do_clear) ++ pe_dmem_write(id, 0, dmem_addr, 4); ++ last = j + 1; ++ } ++ dmem_addr += 4; ++ } ++ for (j = 0; j < last; j++) ++ { ++ len += sprintf(buf + len, "%08x%s", cpu_to_be32(debug[j]), ++ (j & 0x7) == 0x7 || j == last - 1 ? "\n" : " "); ++ } ++ } ++ ++ if (!strncmp(statebuf, "DEAD", 4)) ++ { ++ u32 i, dump = PE_EXCEPTION_DUMP_ADDRESS; ++ ++ len += sprintf(buf + len, "Exception details:\n"); ++ for (i = 0; i < 20; i++) { ++ debug[i] = pe_dmem_read(id, dump, 4); ++ dump +=4; ++ if (i == 2) ++ len += sprintf(buf + len, "%4s = %08x (=%s) ", register_name[i], cpu_to_be32(debug[i]), exception_name[min((u32) cpu_to_be32(debug[i]), (u32)13)]); ++ else ++ len += sprintf(buf + len, "%4s = %08x%s", register_name[i], cpu_to_be32(debug[i]), ++ (i & 0x3) == 0x3 || i == 19 ? "\n" : " "); ++ } ++ } ++ ++ return len; ++} ++ ++static ssize_t class_phy_stats(char *buf, int phy) ++{ ++ ssize_t len = 0; ++ int off1 = phy * 0x28; ++ int off2 = phy * 0x10; ++ ++ if (phy == 3) ++ off1 = CLASS_PHY4_RX_PKTS - CLASS_PHY1_RX_PKTS; ++ ++ len += sprintf(buf + len, "phy: %d\n", phy); ++ len += sprintf(buf + len, " rx: %10u, tx: %10u, intf: %10u, ipv4: %10u, ipv6: %10u\n", ++ readl(CLASS_PHY1_RX_PKTS + off1), readl(CLASS_PHY1_TX_PKTS + off1), ++ readl(CLASS_PHY1_INTF_MATCH_PKTS + off1), readl(CLASS_PHY1_V4_PKTS + off1), ++ readl(CLASS_PHY1_V6_PKTS + off1)); ++ ++ len += sprintf(buf + len, " icmp: %10u, igmp: %10u, tcp: %10u, udp: %10u\n", ++ readl(CLASS_PHY1_ICMP_PKTS + off2), readl(CLASS_PHY1_IGMP_PKTS + off2), ++ readl(CLASS_PHY1_TCP_PKTS + off2), readl(CLASS_PHY1_UDP_PKTS + off2)); ++ ++ len += sprintf(buf + len, " err\n"); ++ len += sprintf(buf + len, " lp: %10u, intf: %10u, l3: %10u, chcksum: %10u, ttl: %10u\n", ++ readl(CLASS_PHY1_LP_FAIL_PKTS + off1), readl(CLASS_PHY1_INTF_FAIL_PKTS + off1), ++ readl(CLASS_PHY1_L3_FAIL_PKTS + off1), readl(CLASS_PHY1_CHKSUM_ERR_PKTS + off1), ++ readl(CLASS_PHY1_TTL_ERR_PKTS + off1)); ++ ++ return len; ++} ++ ++/** qm_read_drop_stat ++ * This function is used to read the drop statistics from the TMU ++ * hw drop counter. Since the hw counter is always cleared afer ++ * reading, this function maintains the previous drop count, and ++ * adds the new value to it. That value can be retrieved by ++ * passing a pointer to it with the total_drops arg. ++ * ++ * @param tmu TMU number (0 - 3) ++ * @param queue queue number (0 - 15) ++ * @param total_drops pointer to location to store total drops (or NULL) ++ * @param do_reset if TRUE, clear total drops after updating ++ * ++ */ ++ ++u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset) ++{ ++ static u32 qtotal[TMU_MAX_ID + 1][NUM_QUEUES]; ++ u32 val; ++ writel((tmu << 8) | queue, TMU_TEQ_CTRL); ++ writel((tmu << 8) | queue, TMU_LLM_CTRL); ++ val = readl(TMU_TEQ_DROP_STAT); ++ qtotal[tmu][queue] += val; ++ if (total_drops) ++ *total_drops = qtotal[tmu][queue]; ++ if (do_reset) ++ qtotal[tmu][queue] = 0; ++ return val; ++} ++ ++static ssize_t tmu_queue_stats(char *buf, int tmu, int queue) ++{ ++ ssize_t len = 0; ++ u32 drops; ++ ++ len += sprintf(buf + len, "%d-%02d, ", tmu, queue); ++ ++ drops = qm_read_drop_stat(tmu, queue, NULL, 0); ++ ++ /* Select queue */ ++ writel((tmu << 8) | queue, TMU_TEQ_CTRL); ++ writel((tmu << 8) | queue, TMU_LLM_CTRL); ++ ++ len += sprintf(buf + len, "(teq) drop: %10u, tx: %10u (llm) head: %08x, tail: %08x, drop: %10u\n", ++ drops, readl(TMU_TEQ_TRANS_STAT), ++ readl(TMU_LLM_QUE_HEADPTR), readl(TMU_LLM_QUE_TAILPTR), ++ readl(TMU_LLM_QUE_DROPCNT)); ++ ++ return len; ++} ++ ++ ++static ssize_t tmu_queues(char *buf, int tmu) ++{ ++ ssize_t len = 0; ++ int queue; ++ ++ for (queue = 0; queue < 16; queue++) ++ len += tmu_queue_stats(buf + len, tmu, queue); ++ ++ return len; ++} ++ ++static ssize_t tmu_ctx(char *buf, int tmu) ++{ ++ ssize_t len = 0; ++ int i; ++ u32 val, tmu_context_addr = TMU_CONTEXT_ADDR; ++ ++ len += sprintf(buf+len, " TMU %d \n", TMU0_ID+tmu); ++ for (i = 1; i <= 160 ; i++, tmu_context_addr += 4) ++ { ++ val = pe_dmem_read(TMU0_ID+tmu, tmu_context_addr , 4); ++ if (i == 5) ++ len += sprintf(buf+len, "\nShapers: Each shaper structure is 8 bytes and there are 10 shapers\n"); ++ ++ if (i == 25) ++ len += sprintf(buf+len, "\nScheduler: Each scheduler structure is 48 bytes and there are 8 schedulers\n"); ++ if (i == 121) ++ len += sprintf(buf+len, "\nQueue: Each queue structure is 2 bytes and there are 16 queues\n"); ++ ++ if (i == 129) ++ len += sprintf(buf+len, "\nqlenmasks array for 16 queues\n"); ++ if (i == 145) ++ len += sprintf(buf+len, "\nqresultmap array for 16 queues\n"); ++ if (i%8 == 0) ++ len += sprintf(buf+len, "%08x \n", cpu_to_be32(val)); ++ else ++ len += sprintf(buf+len, "%08x ", cpu_to_be32(val)); ++ } ++ ++ len += sprintf(buf+len, "\n"); ++ ++ return len; ++} ++ ++static ssize_t block_version(char *buf, void *addr) ++{ ++ ssize_t len = 0; ++ u32 val; ++ ++ val = readl(addr); ++ len += sprintf(buf + len, "revision: %x, version: %x, id: %x\n", (val >> 24) & 0xff, (val >> 16) & 0xff, val & 0xffff); ++ ++ return len; ++} ++ ++static ssize_t bmu(char *buf, int id, void *base) ++{ ++ ssize_t len = 0; ++ ++ len += sprintf(buf + len, "bmu: %d\n ", id); ++ ++ len += block_version(buf + len, base + BMU_VERSION); ++ ++ len += sprintf(buf + len, " buf size: %x\n", (1 << readl(base + BMU_BUF_SIZE))); ++ len += sprintf(buf + len, " buf count: %x\n", readl(base + BMU_BUF_CNT)); ++ len += sprintf(buf + len, " buf rem: %x\n", readl(base + BMU_REM_BUF_CNT)); ++ len += sprintf(buf + len, " buf curr: %x\n", readl(base + BMU_CURR_BUF_CNT)); ++ len += sprintf(buf + len, " free err: %x\n", readl(base + BMU_FREE_ERR_ADDR)); ++ ++ return len; ++} ++ ++static ssize_t gpi(char *buf, int id, void *base) ++{ ++ ssize_t len = 0; ++ u32 val; ++ ++ len += sprintf(buf + len, "gpi%d:\n ", id); ++ len += block_version(buf + len, base + GPI_VERSION); ++ ++ len += sprintf(buf + len, " tx under stick: %x\n", readl(base + GPI_FIFO_STATUS)); ++ val = readl(base + GPI_FIFO_DEBUG); ++ len += sprintf(buf + len, " tx pkts: %x\n", (val >> 23) & 0x3f); ++ len += sprintf(buf + len, " rx pkts: %x\n", (val >> 18) & 0x3f); ++ len += sprintf(buf + len, " tx bytes: %x\n", (val >> 9) & 0x1ff); ++ len += sprintf(buf + len, " rx bytes: %x\n", (val >> 0) & 0x1ff); ++ len += sprintf(buf + len, " overrun: %x\n", readl(base + GPI_OVERRUN_DROPCNT)); ++ ++ return len; ++} ++ ++static ssize_t pfe_set_class(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) ++{ ++ class_do_clear = simple_strtoul(buf, NULL, 0); ++ return count; ++} ++ ++static ssize_t pfe_show_class(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ int id; ++ u32 val; ++ struct pfe_cpumon *cpumon = &pfe->cpumon; ++ ++ len += block_version(buf + len, CLASS_VERSION); ++ ++ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) ++ { ++ len += sprintf(buf + len, "%d: ", id - CLASS0_ID); ++ ++ val = readl(CLASS_PE0_DEBUG + id * 4); ++ len += sprintf(buf + len, "pc=1%04x ", val & 0xffff); ++ ++ len += display_pe_status(buf + len, id, PESTATUS_ADDR_CLASS, class_do_clear); ++ } ++ len += sprintf(buf + len, "aggregate load=%d%%\n\n", cpumon->class_usage_pct); ++ ++ len += sprintf(buf + len, "pe status: 0x%x\n", readl(CLASS_PE_STATUS)); ++ len += sprintf(buf + len, "max buf cnt: 0x%x afull thres: 0x%x\n", readl(CLASS_MAX_BUF_CNT), readl(CLASS_AFULL_THRES)); ++ len += sprintf(buf + len, "tsq max cnt: 0x%x tsq fifo thres: 0x%x\n", readl(CLASS_TSQ_MAX_CNT), readl(CLASS_TSQ_FIFO_THRES)); ++ len += sprintf(buf + len, "state: 0x%x\n", readl(CLASS_STATE)); ++ ++ len += class_phy_stats(buf + len, 0); ++ len += class_phy_stats(buf + len, 1); ++ len += class_phy_stats(buf + len, 2); ++ len += class_phy_stats(buf + len, 3); ++ ++ return len; ++} ++ ++static ssize_t pfe_set_tmu(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) ++{ ++ tmu_do_clear = simple_strtoul(buf, NULL, 0); ++ return count; ++} ++ ++static ssize_t pfe_show_tmu(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ int id; ++ u32 val; ++ ++ len += block_version(buf + len, TMU_VERSION); ++ ++ for (id = TMU0_ID; id <= TMU_MAX_ID; id++) ++ { ++#if defined(CONFIG_PLATFORM_LS1012A) ++ if(id == TMU2_ID) continue; ++#endif ++ len += sprintf(buf + len, "%d: ", id - TMU0_ID); ++ ++ len += display_pe_status(buf + len, id, PESTATUS_ADDR_TMU, tmu_do_clear); ++ } ++ ++ len += sprintf(buf + len, "pe status: %x\n", readl(TMU_PE_STATUS)); ++ len += sprintf(buf + len, "inq fifo cnt: %x\n", readl(TMU_PHY_INQ_FIFO_CNT)); ++ val = readl(TMU_INQ_STAT); ++ len += sprintf(buf + len, "inq wr ptr: %x\n", val & 0x3ff); ++ len += sprintf(buf + len, "inq rd ptr: %x\n", val >> 10); ++ ++ ++ return len; ++} ++ ++ ++static unsigned long drops_do_clear = 0; ++static u32 CLASS_DMEM_SH2(drop_counter)[CLASS_NUM_DROP_COUNTERS]; ++#if !defined(CONFIG_UTIL_DISABLED) ++static u32 UTIL_DMEM_SH2(drop_counter)[UTIL_NUM_DROP_COUNTERS]; ++#endif ++ ++char *class_drop_description[CLASS_NUM_DROP_COUNTERS] = { ++ "ICC", ++ "Host Pkt Error", ++ "Rx Error", ++ "IPsec Outbound", ++ "IPsec Inbound", ++ "EXPT IPsec Error", ++ "Reassembly", ++ "Fragmenter", ++ "NAT-T", ++ "Socket", ++ "Multicast", ++ "NAT-PT", ++ "Tx Disabled", ++}; ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++char *util_drop_description[UTIL_NUM_DROP_COUNTERS] = { ++ "IPsec Outbound", ++ "IPsec Inbound", ++ "IPsec Rate Limiter", ++ "Fragmenter", ++ "Socket", ++ "Tx Disabled", ++ "Rx Error", ++}; ++#endif ++ ++static ssize_t pfe_set_drops(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) ++{ ++ drops_do_clear = simple_strtoul(buf, NULL, 0); ++ return count; ++} ++ ++static u32 tmu_drops[4][16]; ++static ssize_t pfe_show_drops(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ int id, dropnum; ++ int tmu, queue; ++ u32 val; ++ u32 dmem_addr; ++ int num_class_drops = 0, num_tmu_drops = 0, num_util_drops = 0; ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ memset(class_drop_counter, 0, sizeof(class_drop_counter)); ++ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) ++ { ++ if (drops_do_clear) ++ pe_sync_stop(ctrl, (1 << id)); ++ for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS; dropnum++) ++ { ++ dmem_addr = virt_to_class_dmem(&class_drop_counter[dropnum]); ++ val = be32_to_cpu(pe_dmem_read(id, dmem_addr, 4)); ++ class_drop_counter[dropnum] += val; ++ num_class_drops += val; ++ if (drops_do_clear) ++ pe_dmem_write(id, 0, dmem_addr, 4); ++ } ++ if (drops_do_clear) ++ pe_start(ctrl, (1 << id)); ++ } ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ if (drops_do_clear) ++ pe_sync_stop(ctrl, (1 << UTIL_ID)); ++ for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) ++ { ++ dmem_addr = virt_to_util_dmem(&util_drop_counter[dropnum]); ++ val = be32_to_cpu(pe_dmem_read(UTIL_ID, dmem_addr, 4)); ++ util_drop_counter[dropnum] = val; ++ num_util_drops += val; ++ if (drops_do_clear) ++ pe_dmem_write(UTIL_ID, 0, dmem_addr, 4); ++ } ++ if (drops_do_clear) ++ pe_start(ctrl, (1 << UTIL_ID)); ++#endif ++ for (tmu = 0; tmu < 4; tmu++) ++ { ++ for (queue = 0; queue < 16; queue++) ++ { ++ qm_read_drop_stat(tmu, queue, &tmu_drops[tmu][queue], drops_do_clear); ++ num_tmu_drops += tmu_drops[tmu][queue]; ++ } ++ } ++ ++ if (num_class_drops == 0 && num_util_drops == 0 && num_tmu_drops == 0) ++ len += sprintf(buf + len, "No PE drops\n\n"); ++ ++ if (num_class_drops > 0) ++ { ++ len += sprintf(buf + len, "Class PE drops --\n"); ++ for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS; dropnum++) ++ { ++ if (class_drop_counter[dropnum] > 0) ++ len += sprintf(buf + len, " %s: %d\n", class_drop_description[dropnum], class_drop_counter[dropnum]); ++ } ++ len += sprintf(buf + len, "\n"); ++ } ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ if (num_util_drops > 0) ++ { ++ len += sprintf(buf + len, "Util PE drops --\n"); ++ for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) ++ { ++ if (util_drop_counter[dropnum] > 0) ++ len += sprintf(buf + len, " %s: %d\n", util_drop_description[dropnum], util_drop_counter[dropnum]); ++ } ++ len += sprintf(buf + len, "\n"); ++ } ++#endif ++ if (num_tmu_drops > 0) ++ { ++ len += sprintf(buf + len, "TMU drops --\n"); ++ for (tmu = 0; tmu < 4; tmu++) ++ { ++ for (queue = 0; queue < 16; queue++) ++ { ++ if (tmu_drops[tmu][queue] > 0) ++ len += sprintf(buf + len, " TMU%d-Q%d: %d\n", tmu, queue, tmu_drops[tmu][queue]); ++ } ++ } ++ len += sprintf(buf + len, "\n"); ++ } ++ ++ return len; ++} ++ ++static ssize_t pfe_show_tmu0_queues(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_queues(buf, 0); ++} ++ ++static ssize_t pfe_show_tmu1_queues(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_queues(buf, 1); ++} ++ ++static ssize_t pfe_show_tmu2_queues(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_queues(buf, 2); ++} ++ ++static ssize_t pfe_show_tmu3_queues(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_queues(buf, 3); ++} ++ ++static ssize_t pfe_show_tmu0_ctx(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_ctx(buf, 0); ++} ++static ssize_t pfe_show_tmu1_ctx(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_ctx(buf, 1); ++} ++static ssize_t pfe_show_tmu2_ctx(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_ctx(buf, 2); ++} ++ ++static ssize_t pfe_show_tmu3_ctx(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return tmu_ctx(buf, 3); ++} ++ ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++static ssize_t pfe_set_util(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) ++{ ++ util_do_clear = simple_strtoul(buf, NULL, 0); ++ return count; ++} ++ ++static ssize_t pfe_show_util(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ struct pfe_ctrl *ctrl = &pfe->ctrl; ++ ++ ++ len += block_version(buf + len, UTIL_VERSION); ++ ++ pe_sync_stop(ctrl, (1 << UTIL_ID)); ++ len += display_pe_status(buf + len, UTIL_ID, PESTATUS_ADDR_UTIL, util_do_clear); ++ pe_start(ctrl, (1 << UTIL_ID)); ++ ++ len += sprintf(buf + len, "pe status: %x\n", readl(UTIL_PE_STATUS)); ++ len += sprintf(buf + len, "max buf cnt: %x\n", readl(UTIL_MAX_BUF_CNT)); ++ len += sprintf(buf + len, "tsq max cnt: %x\n", readl(UTIL_TSQ_MAX_CNT)); ++ ++ return len; ++} ++#endif ++ ++static ssize_t pfe_show_bmu(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ ++ len += bmu(buf + len, 1, BMU1_BASE_ADDR); ++ len += bmu(buf + len, 2, BMU2_BASE_ADDR); ++ ++ return len; ++} ++ ++static ssize_t pfe_show_hif(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ ++ len += sprintf(buf + len, "hif:\n "); ++ len += block_version(buf + len, HIF_VERSION); ++ ++ len += sprintf(buf + len, " tx curr bd: %x\n", readl(HIF_TX_CURR_BD_ADDR)); ++ len += sprintf(buf + len, " tx status: %x\n", readl(HIF_TX_STATUS)); ++ len += sprintf(buf + len, " tx dma status: %x\n", readl(HIF_TX_DMA_STATUS)); ++ ++ len += sprintf(buf + len, " rx curr bd: %x\n", readl(HIF_RX_CURR_BD_ADDR)); ++ len += sprintf(buf + len, " rx status: %x\n", readl(HIF_RX_STATUS)); ++ len += sprintf(buf + len, " rx dma status: %x\n", readl(HIF_RX_DMA_STATUS)); ++ ++ len += sprintf(buf + len, "hif nocopy:\n "); ++ len += block_version(buf + len, HIF_NOCPY_VERSION); ++ ++ len += sprintf(buf + len, " tx curr bd: %x\n", readl(HIF_NOCPY_TX_CURR_BD_ADDR)); ++ len += sprintf(buf + len, " tx status: %x\n", readl(HIF_NOCPY_TX_STATUS)); ++ len += sprintf(buf + len, " tx dma status: %x\n", readl(HIF_NOCPY_TX_DMA_STATUS)); ++ ++ len += sprintf(buf + len, " rx curr bd: %x\n", readl(HIF_NOCPY_RX_CURR_BD_ADDR)); ++ len += sprintf(buf + len, " rx status: %x\n", readl(HIF_NOCPY_RX_STATUS)); ++ len += sprintf(buf + len, " rx dma status: %x\n", readl(HIF_NOCPY_RX_DMA_STATUS)); ++ ++ return len; ++} ++ ++ ++static ssize_t pfe_show_gpi(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ ++ len += gpi(buf + len, 0, EGPI1_BASE_ADDR); ++ len += gpi(buf + len, 1, EGPI2_BASE_ADDR); ++#if !defined(CONFIG_PLATFORM_LS1012A) ++ len += gpi(buf + len, 2, EGPI3_BASE_ADDR); ++#endif ++ len += gpi(buf + len, 3, HGPI_BASE_ADDR); ++ ++ return len; ++} ++ ++static ssize_t pfe_show_pfemem(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ ssize_t len = 0; ++ struct pfe_memmon *memmon = &pfe->memmon; ++ ++ len += sprintf(buf + len, "Kernel Memory: %d Bytes (%d KB)\n", memmon->kernel_memory_allocated, (memmon->kernel_memory_allocated + 1023) / 1024); ++ ++ return len; ++} ++ ++#ifdef HIF_NAPI_STATS ++static ssize_t pfe_show_hif_napi_stats(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct pfe *pfe = platform_get_drvdata(pdev); ++ ssize_t len = 0; ++ ++ len += sprintf(buf + len, "sched: %u\n", pfe->hif.napi_counters[NAPI_SCHED_COUNT]); ++ len += sprintf(buf + len, "poll: %u\n", pfe->hif.napi_counters[NAPI_POLL_COUNT]); ++ len += sprintf(buf + len, "packet: %u\n", pfe->hif.napi_counters[NAPI_PACKET_COUNT]); ++ len += sprintf(buf + len, "budget: %u\n", pfe->hif.napi_counters[NAPI_FULL_BUDGET_COUNT]); ++ len += sprintf(buf + len, "desc: %u\n", pfe->hif.napi_counters[NAPI_DESC_COUNT]); ++ len += sprintf(buf + len, "full: %u\n", pfe->hif.napi_counters[NAPI_CLIENT_FULL_COUNT]); ++ ++ return len; ++} ++ ++static ssize_t pfe_set_hif_napi_stats(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) ++{ ++ struct platform_device *pdev = to_platform_device(dev); ++ struct pfe *pfe = platform_get_drvdata(pdev); ++ ++ memset(pfe->hif.napi_counters, 0, sizeof(pfe->hif.napi_counters)); ++ ++ return count; ++} ++ ++static DEVICE_ATTR(hif_napi_stats, 0644, pfe_show_hif_napi_stats, pfe_set_hif_napi_stats); ++#endif ++ ++ ++static DEVICE_ATTR(class, 0644, pfe_show_class, pfe_set_class); ++static DEVICE_ATTR(tmu, 0644, pfe_show_tmu, pfe_set_tmu); ++#if !defined(CONFIG_UTIL_DISABLED) ++static DEVICE_ATTR(util, 0644, pfe_show_util, pfe_set_util); ++#endif ++static DEVICE_ATTR(bmu, 0444, pfe_show_bmu, NULL); ++static DEVICE_ATTR(hif, 0444, pfe_show_hif, NULL); ++static DEVICE_ATTR(gpi, 0444, pfe_show_gpi, NULL); ++static DEVICE_ATTR(drops, 0644, pfe_show_drops, pfe_set_drops); ++static DEVICE_ATTR(tmu0_queues, 0444, pfe_show_tmu0_queues, NULL); ++static DEVICE_ATTR(tmu1_queues, 0444, pfe_show_tmu1_queues, NULL); ++static DEVICE_ATTR(tmu2_queues, 0444, pfe_show_tmu2_queues, NULL); ++static DEVICE_ATTR(tmu3_queues, 0444, pfe_show_tmu3_queues, NULL); ++static DEVICE_ATTR(tmu0_ctx, 0444, pfe_show_tmu0_ctx, NULL); ++static DEVICE_ATTR(tmu1_ctx, 0444, pfe_show_tmu1_ctx, NULL); ++static DEVICE_ATTR(tmu2_ctx, 0444, pfe_show_tmu2_ctx, NULL); ++static DEVICE_ATTR(tmu3_ctx, 0444, pfe_show_tmu3_ctx, NULL); ++static DEVICE_ATTR(pfemem, 0444, pfe_show_pfemem, NULL); ++ ++ ++int pfe_sysfs_init(struct pfe *pfe) ++{ ++ if (device_create_file(pfe->dev, &dev_attr_class)) ++ goto err_class; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu)) ++ goto err_tmu; ++ ++#if !defined(CONFIG_UTIL_DISABLED) ++ if (device_create_file(pfe->dev, &dev_attr_util)) ++ goto err_util; ++#endif ++ ++ if (device_create_file(pfe->dev, &dev_attr_bmu)) ++ goto err_bmu; ++ ++ if (device_create_file(pfe->dev, &dev_attr_hif)) ++ goto err_hif; ++ ++ if (device_create_file(pfe->dev, &dev_attr_gpi)) ++ goto err_gpi; ++ ++ if (device_create_file(pfe->dev, &dev_attr_drops)) ++ goto err_drops; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu0_queues)) ++ goto err_tmu0_queues; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu1_queues)) ++ goto err_tmu1_queues; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu2_queues)) ++ goto err_tmu2_queues; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu3_queues)) ++ goto err_tmu3_queues; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu0_ctx)) ++ goto err_tmu0_ctx; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu1_ctx)) ++ goto err_tmu1_ctx; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu2_ctx)) ++ goto err_tmu2_ctx; ++ ++ if (device_create_file(pfe->dev, &dev_attr_tmu3_ctx)) ++ goto err_tmu3_ctx; ++ ++ if (device_create_file(pfe->dev, &dev_attr_pfemem)) ++ goto err_pfemem; ++ ++#ifdef HIF_NAPI_STATS ++ if (device_create_file(pfe->dev, &dev_attr_hif_napi_stats)) ++ goto err_hif_napi_stats; ++#endif ++ ++ return 0; ++ ++#ifdef HIF_NAPI_STATS ++err_hif_napi_stats: ++ device_remove_file(pfe->dev, &dev_attr_pfemem); ++#endif ++ ++err_pfemem: ++ device_remove_file(pfe->dev, &dev_attr_tmu3_ctx); ++ ++err_tmu3_ctx: ++ device_remove_file(pfe->dev, &dev_attr_tmu2_ctx); ++ ++err_tmu2_ctx: ++ device_remove_file(pfe->dev, &dev_attr_tmu1_ctx); ++ ++err_tmu1_ctx: ++ device_remove_file(pfe->dev, &dev_attr_tmu0_ctx); ++ ++err_tmu0_ctx: ++ device_remove_file(pfe->dev, &dev_attr_tmu3_queues); ++ ++err_tmu3_queues: ++ device_remove_file(pfe->dev, &dev_attr_tmu2_queues); ++ ++err_tmu2_queues: ++ device_remove_file(pfe->dev, &dev_attr_tmu1_queues); ++ ++err_tmu1_queues: ++ device_remove_file(pfe->dev, &dev_attr_tmu0_queues); ++ ++err_tmu0_queues: ++ device_remove_file(pfe->dev, &dev_attr_drops); ++ ++err_drops: ++ device_remove_file(pfe->dev, &dev_attr_gpi); ++ ++err_gpi: ++ device_remove_file(pfe->dev, &dev_attr_hif); ++ ++err_hif: ++ device_remove_file(pfe->dev, &dev_attr_bmu); ++ ++err_bmu: ++#if !defined(CONFIG_UTIL_DISABLED) ++ device_remove_file(pfe->dev, &dev_attr_util); ++ ++err_util: ++#endif ++ device_remove_file(pfe->dev, &dev_attr_tmu); ++ ++err_tmu: ++ device_remove_file(pfe->dev, &dev_attr_class); ++ ++err_class: ++ return -1; ++} ++ ++ ++void pfe_sysfs_exit(struct pfe *pfe) ++{ ++#ifdef HIF_NAPI_STATS ++ device_remove_file(pfe->dev, &dev_attr_hif_napi_stats); ++#endif ++ ++ device_remove_file(pfe->dev, &dev_attr_pfemem); ++ device_remove_file(pfe->dev, &dev_attr_tmu3_ctx); ++ device_remove_file(pfe->dev, &dev_attr_tmu2_ctx); ++ device_remove_file(pfe->dev, &dev_attr_tmu1_ctx); ++ device_remove_file(pfe->dev, &dev_attr_tmu0_ctx); ++ device_remove_file(pfe->dev, &dev_attr_tmu3_queues); ++ device_remove_file(pfe->dev, &dev_attr_tmu2_queues); ++ device_remove_file(pfe->dev, &dev_attr_tmu1_queues); ++ device_remove_file(pfe->dev, &dev_attr_tmu0_queues); ++ device_remove_file(pfe->dev, &dev_attr_drops); ++ device_remove_file(pfe->dev, &dev_attr_gpi); ++ device_remove_file(pfe->dev, &dev_attr_hif); ++ device_remove_file(pfe->dev, &dev_attr_bmu); ++#if !defined(CONFIG_UTIL_DISABLED) ++ device_remove_file(pfe->dev, &dev_attr_util); ++#endif ++ device_remove_file(pfe->dev, &dev_attr_tmu); ++ device_remove_file(pfe->dev, &dev_attr_class); ++} ++ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/pfe_sysfs.h +@@ -0,0 +1,34 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PFE_SYSFS_H_ ++#define _PFE_SYSFS_H_ ++ ++#include ++ ++#define PESTATUS_ADDR_CLASS 0x800 ++#define PESTATUS_ADDR_TMU 0x80 ++#define PESTATUS_ADDR_UTIL 0x0 ++ ++#define TMU_CONTEXT_ADDR 0x3c8 ++#define IPSEC_CNTRS_ADDR 0x840 ++ ++int pfe_sysfs_init(struct pfe *pfe); ++void pfe_sysfs_exit(struct pfe *pfe); ++#endif /* _PFE_SYSFS_H_ */ +--- /dev/null ++++ b/drivers/staging/fsl_ppfe/platform.h +@@ -0,0 +1,25 @@ ++/* ++ * ++ * Copyright (C) 2007 Freescale Semiconductor, Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++ ++#ifndef _PLATFORM_H_ ++#define _PLATFORM_H_ ++ ++#define virt_to_phys(virt) ((unsigned long)virt) ++ ++#endif /* _PLATFORM_H_ */ +--- a/include/linux/skbuff.h ++++ b/include/linux/skbuff.h +@@ -858,6 +858,17 @@ static inline struct sk_buff *alloc_skb_ + return __alloc_skb(size, priority, SKB_ALLOC_FCLONE, NUMA_NO_NODE); + } + ++extern struct sk_buff *__alloc_skb_header(unsigned int size, void *data, ++ gfp_t gfp_mask, ++ int fclone, ++ int node); ++static inline struct sk_buff *alloc_skb_header(unsigned int size, ++ u8 *data, ++ gfp_t priority) ++{ ++ return __alloc_skb_header(size, data, priority, 0, -1); ++} ++ + struct sk_buff *__alloc_skb_head(gfp_t priority, int node); + static inline struct sk_buff *alloc_skb_head(gfp_t priority) + { +--- a/net/core/skbuff.c ++++ b/net/core/skbuff.c +@@ -283,6 +283,90 @@ nodata: + EXPORT_SYMBOL(__alloc_skb); + + /** ++ * __alloc_skb_header - allocate a network buffer ++ * @size: size to allocate ++ * @gfp_mask: allocation mask ++ * @fclone: allocate from fclone cache instead of head cache ++ * and allocate a cloned (child) skb ++ * ++ * Allocate a new &sk_buff. The returned buffer has no headroom and a ++ * tail room of size bytes. The object has a reference count of one. ++ * The return is the buffer. On a failure the return is %NULL. ++ * ++ * Buffers may only be allocated from interrupts using a @gfp_mask of ++ * %GFP_ATOMIC. ++ */ ++struct sk_buff *__alloc_skb_header(unsigned int size, void *data, ++ gfp_t gfp_mask, int fclone, int node) ++{ ++ struct kmem_cache *cache; ++ struct skb_shared_info *shinfo; ++ struct sk_buff *skb; ++ ++ cache = fclone ? skbuff_fclone_cache : skbuff_head_cache; ++ ++ if (size <= SKB_DATA_ALIGN(sizeof(struct skb_shared_info))) { ++ skb = NULL; ++ goto out; ++ } ++ ++ /* Get the HEAD */ ++ skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node); ++ if (!skb) ++ goto out; ++ prefetchw(skb); ++ ++ /* kmalloc might give us more room than requested. ++ * Put skb_shared_info exactly at the end of allocated zone, ++ * to allow max possible filling before reallocation. ++ */ ++ size = SKB_WITH_OVERHEAD(ksize(data)); ++ prefetchw(data + size); ++ ++ /* Only clear those fields we need to clear, not those that we will ++ * actually initialise below. Hence, don't put any more fields after ++ * the tail pointer in struct sk_buff! ++ */ ++ memset(skb, 0, offsetof(struct sk_buff, tail)); ++ /* Account for allocated memory : skb + skb->head */ ++ skb->truesize = SKB_TRUESIZE(size); ++ atomic_set(&skb->users, 1); ++ skb->head = data; ++ skb->data = data; ++ skb_reset_tail_pointer(skb); ++ skb->end = skb->tail + size; ++#ifdef NET_SKBUFF_DATA_USES_OFFSET ++ skb->mac_header = ~0U; ++#endif ++ ++#if defined(CONFIG_COMCERTO_CUSTOM_SKB_LAYOUT) ++ skb->mspd_data = NULL; ++ skb->mspd_len = 0; ++#endif ++ ++ /* make sure we initialize shinfo sequentially */ ++ shinfo = skb_shinfo(skb); ++ memset(shinfo, 0, offsetof(struct skb_shared_info, dataref)); ++ atomic_set(&shinfo->dataref, 1); ++ kmemcheck_annotate_variable(shinfo->destructor_arg); ++ ++ if (fclone) { ++ struct sk_buff *child = skb + 1; ++ atomic_t *fclone_ref = (atomic_t *)(child + 1); ++ ++ kmemcheck_annotate_bitfield(child, flags1); ++ kmemcheck_annotate_bitfield(child, flags2); ++ skb->fclone = SKB_FCLONE_ORIG; ++ atomic_set(fclone_ref, 1); ++ ++ child->fclone = SKB_FCLONE_UNAVAILABLE; ++ } ++out: ++ return skb; ++} ++EXPORT_SYMBOL(__alloc_skb_header); ++ ++/** + * __build_skb - build a network buffer + * @data: data buffer provided by caller + * @frag_size: size of data, or 0 if head was kmalloced diff --git a/target/linux/layerscape/patches-4.4/8073-ls1012a-added-clock-configuration.patch b/target/linux/layerscape/patches-4.4/8073-ls1012a-added-clock-configuration.patch new file mode 100644 index 0000000000..3936c80643 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8073-ls1012a-added-clock-configuration.patch @@ -0,0 +1,61 @@ +From 9112596c3c7b7b8b1eded3323765fa711dc58e74 Mon Sep 17 00:00:00 2001 +From: Tang Yuantian +Date: Thu, 25 Aug 2016 10:38:28 +0800 +Subject: [PATCH 073/113] ls1012a: added clock configuration + +commit c9c11181191938b77bfd61e5094a63955cf711fd +[context adjustment] +[don't apply fsl-ls1012a.dtsi] + +Currently ls1012a used the clock configuration of ls1043a's. +But there is a little different between them. This patch added +ls1012a its own clock configuration. + +Signed-off-by: Tang Yuantian +Integrated-by: Zhao Qiang +--- + drivers/clk/clk-qoriq.c | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +--- a/drivers/clk/clk-qoriq.c ++++ b/drivers/clk/clk-qoriq.c +@@ -195,6 +195,14 @@ static const struct clockgen_muxinfo t10 + } + }; + ++static const struct clockgen_muxinfo ls1012a_cmux = { ++ { ++ [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, ++ {}, ++ [2] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV2 }, ++ } ++}; ++ + static const struct clockgen_muxinfo t1040_cmux = { + { + [0] = { CLKSEL_VALID, CGA_PLL1, PLL_DIV1 }, +@@ -475,6 +483,16 @@ static const struct clockgen_chipinfo ch + .pll_mask = 0x03, + }, + { ++ .compat = "fsl,ls1012a-clockgen", ++ .cmux_groups = { ++ &ls1012a_cmux ++ }, ++ .cmux_to_group = { ++ 0, -1 ++ }, ++ .pll_mask = 0x03, ++ }, ++ { + .compat = "fsl,ls1043a-clockgen", + .init_periph = t2080_init_periph, + .cmux_groups = { +@@ -1268,6 +1286,7 @@ CLK_OF_DECLARE(qoriq_clockgen_2, "fsl,qo + CLK_OF_DECLARE(qoriq_clockgen_ls1021a, "fsl,ls1021a-clockgen", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init); + CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init); ++CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init); + + /* Legacy nodes */ + CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init); diff --git a/target/linux/layerscape/patches-4.4/8114-drivers-PCIE-enable-for-Linux.patch b/target/linux/layerscape/patches-4.4/8114-drivers-PCIE-enable-for-Linux.patch new file mode 100644 index 0000000000..61c85a1f3e --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8114-drivers-PCIE-enable-for-Linux.patch @@ -0,0 +1,49 @@ +From cfe7a6abd3d7e9ffeed8230847bbe2f680757305 Mon Sep 17 00:00:00 2001 +From: Pratiyush Mohan Srivastava +Date: Sun, 24 Apr 2016 23:43:19 +0530 +Subject: [PATCH 114/123] drivers: PCIE enable for Linux + +[This patch from sdk release, just context adjustment] +Add support for PCIE for LS1012A in kernel + +Signed-off-by: Pratiyush Mohan Srivastava +Signed-off-by: Prabhakar Kushwaha +Integrated-by: Jiang Yutang +--- + drivers/irqchip/irq-ls-scfg-msi.c | 1 + + drivers/pci/host/pci-layerscape.c | 7 +++++++ + 2 files changed, 8 insertions(+) + +--- a/drivers/irqchip/irq-ls-scfg-msi.c ++++ b/drivers/irqchip/irq-ls-scfg-msi.c +@@ -219,6 +219,7 @@ static int ls_scfg_msi_remove(struct pla + } + + static const struct of_device_id ls_scfg_msi_id[] = { ++ { .compatible = "fsl,ls1012a-msi", }, + { .compatible = "fsl,1s1021a-msi", }, + { .compatible = "fsl,1s1043a-msi", }, + {}, +--- a/drivers/pci/host/pci-layerscape.c ++++ b/drivers/pci/host/pci-layerscape.c +@@ -192,6 +192,12 @@ static struct ls_pcie_drvdata ls1021_drv + .ops = &ls1021_pcie_host_ops, + }; + ++static struct ls_pcie_drvdata ls1012_drvdata = { ++ .lut_offset = 0xC0000, ++ .ltssm_shift = 24, ++ .ops = &ls_pcie_host_ops, ++}; ++ + static struct ls_pcie_drvdata ls1043_drvdata = { + .lut_offset = 0x10000, + .ltssm_shift = 24, +@@ -205,6 +211,7 @@ static struct ls_pcie_drvdata ls2080_drv + }; + + static const struct of_device_id ls_pcie_of_match[] = { ++ { .compatible = "fsl,ls1012a-pcie", .data = &ls1012_drvdata }, + { .compatible = "fsl,ls1021a-pcie", .data = &ls1021_drvdata }, + { .compatible = "fsl,ls1043a-pcie", .data = &ls1043_drvdata }, + { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata }, diff --git a/target/linux/layerscape/patches-4.4/8115-PCI-layerscape-call-dw_pcie_setup_rc-in-host-initial.patch b/target/linux/layerscape/patches-4.4/8115-PCI-layerscape-call-dw_pcie_setup_rc-in-host-initial.patch new file mode 100644 index 0000000000..cf67e59472 --- /dev/null +++ b/target/linux/layerscape/patches-4.4/8115-PCI-layerscape-call-dw_pcie_setup_rc-in-host-initial.patch @@ -0,0 +1,30 @@ +From 5d661761fd2354e4f976c83143a1bf7c1ecad766 Mon Sep 17 00:00:00 2001 +From: Yangbo Lu +Date: Tue, 20 Sep 2016 16:07:10 +0800 +Subject: [PATCH 115/115] PCI: layerscape: call dw_pcie_setup_rc() in host + initialization + +A previous patch moved some Root Complex programming from +dw_pcie_host_init() to dw_pcie_setup_rc() where it belongs, +while the pci-layerscape driver didn't call dw_pcie_setup_rc() +anywhere after that. This patch is to add dw_pcie_setup_rc() +calling in layerscape host initialization to fix ls1012a pci +issue caused by that patch. + +Fixes: c49b76f3c613("PCI: designware: Move Root Complex setup + code to dw_pcie_setup_rc()") +Signed-off-by: Yangbo Lu +--- + drivers/pci/host/pci-layerscape.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/pci/host/pci-layerscape.c ++++ b/drivers/pci/host/pci-layerscape.c +@@ -148,6 +148,7 @@ static void ls_pcie_host_init(struct pci + { + struct ls_pcie *pcie = to_ls_pcie(pp); + ++ dw_pcie_setup_rc(pp); + iowrite32(1, pcie->dbi + PCIE_DBI_RO_WR_EN); + ls_pcie_fix_class(pcie); + ls_pcie_clear_multifunction(pcie); -- cgit v1.2.3