From 150a9444c19e8938242b77d961c0e7c7079d6239 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 25 Nov 2012 16:23:05 +0000 Subject: AA: ar71xx: set pad6 cfg for AR8327 on the AP136 board Backport of r34316. Also override the pll_1000 value. Without these settings ethernet suffers from packet loss. Signed-off-by: Gabor Juhos git-svn-id: svn://svn.openwrt.org/openwrt/branches/attitude_adjustment@34374 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../patches-3.3/609-MIPS-ath79-ap136-fixes.patch | 29 ++++++++++++++-------- 1 file changed, 19 insertions(+), 10 deletions(-) (limited to 'target/linux') diff --git a/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch b/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch index bd07c7bc82..b378888bfd 100644 --- a/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch +++ b/target/linux/ar71xx/patches-3.3/609-MIPS-ath79-ap136-fixes.patch @@ -56,7 +56,7 @@ static struct gpio_led ap136_leds_gpio[] __initdata = { { -@@ -98,63 +104,82 @@ static struct gpio_keys_button ap136_gpi +@@ -98,63 +104,91 @@ static struct gpio_keys_button ap136_gpi }, }; @@ -78,31 +78,40 @@ - .max_speed_hz = 25000000, - .modalias = "mx25l6405d", - .controller_data = &ap136_spi0_data, +- } ++static struct ar8327_pad_cfg ap136_ar8327_pad6_cfg = { ++ .mode = AR8327_PAD_MAC_SGMII, ++ .txclk_delay_en = false, ++ .rxclk_delay_en = true, ++ .txclk_delay_sel = AR8327_CLK_DELAY_SEL0, ++ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, + }; + +-static struct ath79_spi_platform_data ap136_spi_data = { +- .bus_num = 0, +- .num_chipselect = 1, +static struct ar8327_platform_data ap136_ar8327_data = { + .pad0_cfg = &ap136_ar8327_pad0_cfg, ++ .pad6_cfg = &ap136_ar8327_pad6_cfg, + .cpuport_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, - } ++ } }; --static struct ath79_spi_platform_data ap136_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, +-#ifdef CONFIG_PCI +-static struct ath9k_platform_data ap136_ath9k_data; +static struct mdio_board_info ap136_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &ap136_ar8327_data, + }, - }; ++}; --#ifdef CONFIG_PCI --static struct ath9k_platform_data ap136_ath9k_data; -- -static int ap136_pci_plat_dev_init(struct pci_dev *dev) +static void __init ap136_gmac_setup(void) { @@ -167,7 +176,7 @@ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; ++ ath79_eth0_pll_data.pll_1000 = 0xa6000000; + + ath79_register_eth(0); } -- cgit v1.2.3