From 4a18a35a91f6650deea92052c9fb74c1b90d7428 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Mon, 11 Jan 2010 04:44:45 +0000 Subject: Merge xburst target. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19098 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- target/linux/xburst/Makefile | 28 + target/linux/xburst/base-files/etc/config/fstab | 6 + target/linux/xburst/base-files/etc/config/network | 13 + target/linux/xburst/base-files/etc/config/system | 3 + target/linux/xburst/config-2.6.32 | 403 + .../arch/mips/boot/compressed/Makefile | 42 + .../files-2.6.32/arch/mips/boot/compressed/dummy.c | 4 + .../files-2.6.32/arch/mips/boot/compressed/head.S | 85 + .../arch/mips/boot/compressed/ld.script | 151 + .../files-2.6.32/arch/mips/boot/compressed/misc.c | 242 + .../xburst/files-2.6.32/arch/mips/boot/tools/entry | 12 + .../files-2.6.32/arch/mips/boot/tools/filesize | 7 + .../mips/include/asm/mach-jz4740/board-qi_lb60.h | 56 + .../arch/mips/include/asm/mach-jz4740/clock.h | 298 + .../arch/mips/include/asm/mach-jz4740/dma.h | 90 + .../arch/mips/include/asm/mach-jz4740/gpio.h | 393 + .../arch/mips/include/asm/mach-jz4740/irq.h | 55 + .../arch/mips/include/asm/mach-jz4740/jz4740.h | 38 + .../arch/mips/include/asm/mach-jz4740/platform.h | 34 + .../arch/mips/include/asm/mach-jz4740/regs.h | 675 ++ .../arch/mips/include/asm/mach-jz4740/serial.h | 30 + .../arch/mips/include/asm/mach-jz4740/timer.h | 22 + .../arch/mips/include/asm/mach-jz4740/war.h | 25 + .../xburst/files-2.6.32/arch/mips/jz4740/Kconfig | 35 + .../xburst/files-2.6.32/arch/mips/jz4740/Makefile | 18 + .../files-2.6.32/arch/mips/jz4740/board-n526.c | 346 + .../files-2.6.32/arch/mips/jz4740/board-qi_lb60.c | 394 + .../xburst/files-2.6.32/arch/mips/jz4740/clock.c | 795 ++ .../xburst/files-2.6.32/arch/mips/jz4740/dma.c | 338 + .../xburst/files-2.6.32/arch/mips/jz4740/gpio.c | 490 + .../xburst/files-2.6.32/arch/mips/jz4740/irq.c | 130 + .../files-2.6.32/arch/mips/jz4740/platform.c | 246 + .../xburst/files-2.6.32/arch/mips/jz4740/pm.c | 77 + .../xburst/files-2.6.32/arch/mips/jz4740/prom.c | 111 + .../xburst/files-2.6.32/arch/mips/jz4740/reset.c | 50 + .../xburst/files-2.6.32/arch/mips/jz4740/setup.c | 108 + .../xburst/files-2.6.32/arch/mips/jz4740/time.c | 262 + .../xburst/files-2.6.32/drivers/char/defkeymap.c | 422 + .../files-2.6.32/drivers/i2c/chips/n526-lpc.c | 237 + .../xburst/files-2.6.32/drivers/misc/jz4740-adc.c | 362 + .../xburst/files-2.6.32/drivers/mmc/host/jz_mmc.c | 955 ++ .../files-2.6.32/drivers/mtd/nand/jz4740_nand.c | 418 + .../files-2.6.32/drivers/power/jz4740-battery.c | 471 + .../xburst/files-2.6.32/drivers/rtc/rtc-jz4740.c | 325 + .../files-2.6.32/drivers/usb/gadget/jz4740_udc.c | 2410 +++++ .../files-2.6.32/drivers/usb/gadget/jz4740_udc.h | 97 + .../drivers/video/backlight/gpm940b0.c | 255 + .../xburst/files-2.6.32/drivers/video/jz4740_fb.c | 575 ++ .../xburst/files-2.6.32/include/linux/jz4740-adc.h | 25 + .../xburst/files-2.6.32/include/linux/jz4740_fb.h | 52 + .../files-2.6.32/include/linux/mmc/jz4740_mmc.h | 15 + .../files-2.6.32/include/linux/mtd/jz4740_nand.h | 34 + .../include/linux/power/jz4740-battery.h | 28 + .../xburst/files-2.6.32/sound/soc/codecs/jzcodec.c | 520 ++ .../xburst/files-2.6.32/sound/soc/codecs/jzcodec.h | 22 + .../xburst/files-2.6.32/sound/soc/jz4740/Kconfig | 29 + .../xburst/files-2.6.32/sound/soc/jz4740/Makefile | 15 + .../files-2.6.32/sound/soc/jz4740/jz4740-i2s.c | 552 ++ .../files-2.6.32/sound/soc/jz4740/jz4740-i2s.h | 18 + .../files-2.6.32/sound/soc/jz4740/jz4740-pcm.c | 342 + .../files-2.6.32/sound/soc/jz4740/jz4740-pcm.h | 22 + .../xburst/files-2.6.32/sound/soc/jz4740/n526.c | 169 + .../xburst/files-2.6.32/sound/soc/jz4740/qi_lb60.c | 182 + target/linux/xburst/image/Makefile | 28 + target/linux/xburst/image/ubinize.cfg | 14 + target/linux/xburst/modules.mk | 4 + target/linux/xburst/patches-2.6.32/001-core.patch | 684 ++ target/linux/xburst/patches-2.6.32/050-nand.patch | 88 + target/linux/xburst/patches-2.6.32/051-fb.patch | 45 + target/linux/xburst/patches-2.6.32/052-rtc.patch | 47 + target/linux/xburst/patches-2.6.32/053-adc.patch | 46 + .../linux/xburst/patches-2.6.32/100-battery.patch | 42 + target/linux/xburst/patches-2.6.32/101-mmc.patch | 45 + target/linux/xburst/patches-2.6.32/103-lcm.patch | 43 + .../linux/xburst/patches-2.6.32/103-serial.patch | 178 + target/linux/xburst/patches-2.6.32/104-usb.patch | 96 + target/linux/xburst/patches-2.6.32/105-sound.patch | 138 + .../patches-2.6.32/220-add-2gb-nand-support.patch | 25 + .../patches-2.6.32/300-jffs2-summery-vmalloc.patch | 34 + .../xburst/patches-2.6.32/400-spi-gpio-3wire.patch | 51 + .../patches-2.6.32/420-fb-notifier-pre-post.patch | 42 + .../xburst/patches-2.6.32/500-modifier-keys.patch | 186 + .../linux/xburst/patches-2.6.32/800-n526-lpc.patch | 43 + .../patches-2.6.32/900-add-openwrt-logo.patch | 9737 ++++++++++++++++++++ 84 files changed, 26280 insertions(+) create mode 100644 target/linux/xburst/Makefile create mode 100644 target/linux/xburst/base-files/etc/config/fstab create mode 100755 target/linux/xburst/base-files/etc/config/network create mode 100644 target/linux/xburst/base-files/etc/config/system create mode 100644 target/linux/xburst/config-2.6.32 create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/dummy.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/head.S create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/ld.script create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/misc.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/boot/tools/entry create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/boot/tools/filesize create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/dma.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/gpio.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/irq.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/platform.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/regs.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/serial.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/timer.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/war.h create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/Kconfig create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/Makefile create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-qi_lb60.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/clock.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/dma.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/gpio.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/irq.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/platform.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/pm.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/prom.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/reset.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/setup.c create mode 100644 target/linux/xburst/files-2.6.32/arch/mips/jz4740/time.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/char/defkeymap.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/i2c/chips/n526-lpc.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/misc/jz4740-adc.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/mmc/host/jz_mmc.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/mtd/nand/jz4740_nand.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/power/jz4740-battery.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/rtc/rtc-jz4740.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/usb/gadget/jz4740_udc.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/usb/gadget/jz4740_udc.h create mode 100644 target/linux/xburst/files-2.6.32/drivers/video/backlight/gpm940b0.c create mode 100644 target/linux/xburst/files-2.6.32/drivers/video/jz4740_fb.c create mode 100644 target/linux/xburst/files-2.6.32/include/linux/jz4740-adc.h create mode 100644 target/linux/xburst/files-2.6.32/include/linux/jz4740_fb.h create mode 100644 target/linux/xburst/files-2.6.32/include/linux/mmc/jz4740_mmc.h create mode 100644 target/linux/xburst/files-2.6.32/include/linux/mtd/jz4740_nand.h create mode 100644 target/linux/xburst/files-2.6.32/include/linux/power/jz4740-battery.h create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/codecs/jzcodec.c create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/codecs/jzcodec.h create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/Kconfig create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/Makefile create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/jz4740-i2s.c create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/jz4740-i2s.h create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/jz4740-pcm.c create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/jz4740-pcm.h create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/n526.c create mode 100644 target/linux/xburst/files-2.6.32/sound/soc/jz4740/qi_lb60.c create mode 100644 target/linux/xburst/image/Makefile create mode 100644 target/linux/xburst/image/ubinize.cfg create mode 100644 target/linux/xburst/modules.mk create mode 100644 target/linux/xburst/patches-2.6.32/001-core.patch create mode 100644 target/linux/xburst/patches-2.6.32/050-nand.patch create mode 100644 target/linux/xburst/patches-2.6.32/051-fb.patch create mode 100644 target/linux/xburst/patches-2.6.32/052-rtc.patch create mode 100644 target/linux/xburst/patches-2.6.32/053-adc.patch create mode 100644 target/linux/xburst/patches-2.6.32/100-battery.patch create mode 100644 target/linux/xburst/patches-2.6.32/101-mmc.patch create mode 100644 target/linux/xburst/patches-2.6.32/103-lcm.patch create mode 100644 target/linux/xburst/patches-2.6.32/103-serial.patch create mode 100644 target/linux/xburst/patches-2.6.32/104-usb.patch create mode 100644 target/linux/xburst/patches-2.6.32/105-sound.patch create mode 100644 target/linux/xburst/patches-2.6.32/220-add-2gb-nand-support.patch create mode 100644 target/linux/xburst/patches-2.6.32/300-jffs2-summery-vmalloc.patch create mode 100644 target/linux/xburst/patches-2.6.32/400-spi-gpio-3wire.patch create mode 100644 target/linux/xburst/patches-2.6.32/420-fb-notifier-pre-post.patch create mode 100644 target/linux/xburst/patches-2.6.32/500-modifier-keys.patch create mode 100644 target/linux/xburst/patches-2.6.32/800-n526-lpc.patch create mode 100644 target/linux/xburst/patches-2.6.32/900-add-openwrt-logo.patch (limited to 'target/linux/xburst') diff --git a/target/linux/xburst/Makefile b/target/linux/xburst/Makefile new file mode 100644 index 0000000000..7043be021c --- /dev/null +++ b/target/linux/xburst/Makefile @@ -0,0 +1,28 @@ +# +# Copyright (C) 2009-2010 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=mipsel +BOARD:=xburst +BOARDNAME:=XBurst JZ47x0 +FEATURES:=jffs2 tgz ubifs + +LINUX_VERSION:=2.6.32 + +DEVICE_TYPE=other + +include $(INCLUDE_DIR)/target.mk + +KERNELNAME:=uImage + +DEFAULT_PACKAGES += gpioctl + +define Target/Description + Build firmware images for XBurst JZ47x0 based boards. +endef + +$(eval $(call BuildTarget)) diff --git a/target/linux/xburst/base-files/etc/config/fstab b/target/linux/xburst/base-files/etc/config/fstab new file mode 100644 index 0000000000..522356112f --- /dev/null +++ b/target/linux/xburst/base-files/etc/config/fstab @@ -0,0 +1,6 @@ +config mount + option target /card + option device /dev/mmcblk0p1 + option fstype auto + option options rw,sync + option enabled 1 diff --git a/target/linux/xburst/base-files/etc/config/network b/target/linux/xburst/base-files/etc/config/network new file mode 100755 index 0000000000..a086003e32 --- /dev/null +++ b/target/linux/xburst/base-files/etc/config/network @@ -0,0 +1,13 @@ +# Copyright (C) 2006 OpenWrt.org + +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname usb0 + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 diff --git a/target/linux/xburst/base-files/etc/config/system b/target/linux/xburst/base-files/etc/config/system new file mode 100644 index 0000000000..e198966977 --- /dev/null +++ b/target/linux/xburst/base-files/etc/config/system @@ -0,0 +1,3 @@ +config system + option hostname BenNanoNote + option timezone UTC diff --git a/target/linux/xburst/config-2.6.32 b/target/linux/xburst/config-2.6.32 new file mode 100644 index 0000000000..6b042072ea --- /dev/null +++ b/target/linux/xburst/config-2.6.32 @@ -0,0 +1,403 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_AR7 is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ARPD is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BATTERY_JZ4740=y +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +CONFIG_BITREVERSE=y +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BRIDGE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +CONFIG_CONSOLE_TRANSLATIONS=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_LOONGSON2E is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DUMMY_CONSOLE=y +CONFIG_EARLY_PRINTK=y +CONFIG_ELF_CORE=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_FAT_FS=y +CONFIG_FB=y +CONFIG_FB_JZ4740=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FONTS=y +# CONFIG_FONT_10x18 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_SUN12x22 is not set +CONFIG_FONT_SUN8x16=y +CONFIG_FORCE_MAX_ZONEORDER=12 +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FREEZER=y +# CONFIG_FSNOTIFY is not set +# CONFIG_FW_LOADER is not set +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_MC33880 is not set +# CONFIG_HAMRADIO is not set +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HIBERNATION is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_HW_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_GPIO_BUTTONS is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_INPUT_YEALINK is not set +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_IP_ADVANCED_ROUTER is not set +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_RARP is not set +CONFIG_IRQ_CPU=y +# CONFIG_ISDN is not set +CONFIG_JBD=y +CONFIG_JZ4740_ADC=y +# CONFIG_JZ4740_N526 is not set +CONFIG_JZ4740_QI_LB60=y +CONFIG_JZRISC=y +CONFIG_JZSOC=y +CONFIG_KALLSYMS=y +CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_MATRIX=y +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_GPM940B0=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_PLATFORM is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=2 +CONFIG_LOCALVERSION_AUTO=y +CONFIG_LOCK_KERNEL=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_OPENWRT_CLUT224=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +CONFIG_MACH_JZ=y +# CONFIG_MACH_LOONGSON is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_MINI_FO is not set +CONFIG_MIPS=y +# CONFIG_MIPS_COBALT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +# CONFIG_MIPS_MALTA is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_SIM is not set +CONFIG_MMC=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +CONFIG_MMC_JZ=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_MODVERSIONS=y +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_JZ4740=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_SST25L is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_DEBUG is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETFILTER is not set +# CONFIG_NETWORK_FILESYSTEMS is not set +# CONFIG_NET_ETHERNET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NEW_LEDS is not set +CONFIG_NLS=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_NO_IOPORT is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PACKET_MMAP is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCSPKR_PLATFORM=y +# CONFIG_PDA_POWER is not set +CONFIG_PM=y +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PM_DEBUG is not set +# CONFIG_PM_RUNTIME is not set +CONFIG_PM_SLEEP=y +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PRINTK_TIME=y +CONFIG_RELAY=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_DRV_CMOS is not set +CONFIG_RTC_DRV_JZ4740=y +# CONFIG_RTC_DRV_PCF2123 is not set +CONFIG_SCHED_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_DMA is not set +# CONFIG_SDIO_UART is not set +CONFIG_SECCOMP=y +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +CONFIG_SND=y +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_JACK=y +CONFIG_SND_JZ4740_SOC=y +CONFIG_SND_JZ4740_SOC_I2S=y +CONFIG_SND_JZ4740_SOC_QI_LB60=y +CONFIG_SND_MIXER_OSS=y +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +CONFIG_SND_PCM=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +CONFIG_SND_SOC=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +CONFIG_SND_SOC_JZCODEC=y +CONFIG_SND_TIMER=y +# CONFIG_SND_VERBOSE_PROCFS is not set +CONFIG_SOC_JZ4740=y +CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set +CONFIG_SPI=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +CONFIG_SPI_MASTER=y +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SQUASHFS is not set +# CONFIG_STAGING is not set +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_SYN_COOKIES is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TRAD_SIGNALS=y +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +# CONFIG_UBIFS_FS_DEBUG is not set +CONFIG_UBIFS_FS_LZO=y +# CONFIG_UBIFS_FS_XATTR is not set +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_USB_ETH=y +# CONFIG_USB_ETH_EEM is not set +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_FILE_STORAGE is not set +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_IMX is not set +CONFIG_USB_GADGET_JZ4740=y +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +CONFIG_USB_GADGET_SELECTED=y +CONFIG_USB_GADGET_VBUS_DRAW=2 +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_G_SERIAL is not set +CONFIG_USB_JZ4740=y +# CONFIG_USB_MIDI_GADGET is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_ZERO is not set +CONFIG_VFAT_FS=y +# CONFIG_VGA_CONSOLE is not set +# CONFIG_VLAN_8021Q is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_WATCHDOG is not set +# CONFIG_WLAN_80211 is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile new file mode 100644 index 0000000000..9b41329852 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/Makefile @@ -0,0 +1,42 @@ +# +# linux/arch/mips/boot/compressed/Makefile +# +# create a compressed zImage from the original vmlinux +# + +targets := zImage vmlinuz vmlinux.bin.gz head.o misc.o piggy.o dummy.o + +OBJS := $(obj)/head.o $(obj)/misc.o + +LD_ARGS := -T $(obj)/ld.script -Ttext 0x80600000 -Bstatic +OBJCOPY_ARGS := -O elf32-tradlittlemips + +ENTRY := $(obj)/../tools/entry +FILESIZE := $(obj)/../tools/filesize + +drop-sections = .reginfo .mdebug .comment .note .pdr .options .MIPS.options +strip-flags = $(addprefix --remove-section=,$(drop-sections)) + + +$(obj)/vmlinux.bin.gz: vmlinux + rm -f $(obj)/vmlinux.bin.gz + $(OBJCOPY) -O binary $(strip-flags) vmlinux $(obj)/vmlinux.bin + gzip -v9f $(obj)/vmlinux.bin + +$(obj)/head.o: $(obj)/head.S $(obj)/vmlinux.bin.gz vmlinux + $(CC) $(KBUILD_AFLAGS) \ + -DIMAGESIZE=$(shell sh $(FILESIZE) $(obj)/vmlinux.bin.gz) \ + -DKERNEL_ENTRY=$(shell sh $(ENTRY) $(NM) vmlinux ) \ + -DLOADADDR=$(loadaddr) \ + -c -o $(obj)/head.o $< + +$(obj)/vmlinuz: $(OBJS) $(obj)/ld.script $(obj)/vmlinux.bin.gz $(obj)/dummy.o + $(OBJCOPY) \ + --add-section=.image=$(obj)/vmlinux.bin.gz \ + --set-section-flags=.image=contents,alloc,load,readonly,data \ + $(obj)/dummy.o $(obj)/piggy.o + $(LD) $(LD_ARGS) -o $@ $(OBJS) $(obj)/piggy.o + $(OBJCOPY) $(OBJCOPY_ARGS) $@ $@ -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap + +zImage: $(obj)/vmlinuz + $(OBJCOPY) -O binary $(obj)/vmlinuz $(obj)/zImage diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/dummy.c b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/dummy.c new file mode 100644 index 0000000000..31dbf45bf9 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/dummy.c @@ -0,0 +1,4 @@ +int main(void) +{ + return 0; +} diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/head.S b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/head.S new file mode 100644 index 0000000000..d9700eb502 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/head.S @@ -0,0 +1,85 @@ +/* + * linux/arch/mips/boot/compressed/head.S + * + * Copyright (C) 2005-2008 Ingenic Semiconductor Inc. + */ + +#include +#include +#include +#include + +#define IndexInvalidate_I 0x00 +#define IndexWriteBack_D 0x01 + + .set noreorder + LEAF(startup) +startup: + move s0, a0 /* Save the boot loader transfered args */ + move s1, a1 + move s2, a2 + move s3, a3 + + la a0, _edata + la a1, _end +1: sw zero, 0(a0) /* Clear BSS section */ + bne a1, a0, 1b + addu a0, 4 + + la sp, (.stack + 8192) + + la a0, __image_begin + la a1, IMAGESIZE + la a2, LOADADDR + la ra, 1f + la k0, decompress_kernel + jr k0 + nop +1: + + move a0, s0 + move a1, s1 + move a2, s2 + move a3, s3 + li k0, KERNEL_ENTRY + jr k0 + nop +2: + b 32 + END(startup) + + + LEAF(flushcaches) + la t0, 1f + la t1, 0xa0000000 + or t0, t0, t1 + jr t0 + nop +1: + li k0, 0x80000000 # start address + li k1, 0x80004000 # end address (16KB I-Cache) + subu k1, 128 + +2: + .set mips3 + cache IndexWriteBack_D, 0(k0) + cache IndexWriteBack_D, 32(k0) + cache IndexWriteBack_D, 64(k0) + cache IndexWriteBack_D, 96(k0) + cache IndexInvalidate_I, 0(k0) + cache IndexInvalidate_I, 32(k0) + cache IndexInvalidate_I, 64(k0) + cache IndexInvalidate_I, 96(k0) + .set mips0 + + bne k0, k1, 2b + addu k0, k0, 128 + la t0, 3f + jr t0 + nop +3: + jr ra + nop + END(flushcaches) + + .comm .stack,4096*2,4 diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/ld.script b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/ld.script new file mode 100644 index 0000000000..fcf8ba0417 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/ld.script @@ -0,0 +1,151 @@ +OUTPUT_ARCH(mips) +ENTRY(startup) +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + + .init : { *(.init) } =0 + .text : + { + _ftext = . ; + *(.text) + *(.rodata) + *(.rodata1) + /* .gnu.warning sections are handled specially by elf32.em. */ + *(.gnu.warning) + } =0 + .kstrtab : { *(.kstrtab) } + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + __start___dbe_table = .; /* Exception table for data bus errors */ + __dbe_table : { *(__dbe_table) } + __stop___dbe_table = .; + + __start___ksymtab = .; /* Kernel symbol table */ + __ksymtab : { *(__ksymtab) } + __stop___ksymtab = .; + + _etext = .; + + . = ALIGN(8192); + .data.init_task : { *(.data.init_task) } + + /* Startup code */ + . = ALIGN(4096); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(16); + __setup_start = .; + .setup.init : { *(.setup.init) } + __setup_end = .; + __initcall_start = .; + .initcall.init : { *(.initcall.init) } + __initcall_end = .; + . = ALIGN(4096); /* Align double page for init_task_union */ + __init_end = .; + + . = ALIGN(4096); + .data.page_aligned : { *(.data.idt) } + + . = ALIGN(32); + .data.cacheline_aligned : { *(.data.cacheline_aligned) } + + .fini : { *(.fini) } =0 + .reginfo : { *(.reginfo) } + /* Adjust the address for the data segment. We want to adjust up to + the same address within the page on the next page up. It would + be more correct to do this: + . = .; + The current expression does not correctly handle the case of a + text segment ending precisely at the end of a page; it causes the + data segment to skip a page. The above expression does not have + this problem, but it will currently (2/95) cause BFD to allocate + a single segment, combining both text and data, for this case. + This will prevent the text segment from being shared among + multiple executions of the program; I think that is more + important than losing a page of the virtual address space (note + that no actual memory is lost; the page which is skipped can not + be referenced). */ + . = .; + .data : + { + _fdata = . ; + *(.data) + + /* Put the compressed image here, so bss is on the end. */ + __image_begin = .; + *(.image) + __image_end = .; + /* Align the initial ramdisk image (INITRD) on page boundaries. */ + . = ALIGN(4096); + __ramdisk_begin = .; + *(.initrd) + __ramdisk_end = .; + . = ALIGN(4096); + + CONSTRUCTORS + } + .data1 : { *(.data1) } + _gp = . + 0x8000; + .lit8 : { *(.lit8) } + .lit4 : { *(.lit4) } + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + .got : { *(.got.plt) *(.got) } + .dynamic : { *(.dynamic) } + /* We want the small data sections together, so single-instruction offsets + can access them all, and initialized data all before uninitialized, so + we can shorten the on-disk segment size. */ + .sdata : { *(.sdata) } + . = ALIGN(4); + _edata = .; + PROVIDE (edata = .); + + __bss_start = .; + _fbss = .; + .sbss : { *(.sbss) *(.scommon) } + .bss : + { + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + _end = . ; + PROVIDE (end = .); + } + + /* Sections to be discarded */ + /DISCARD/ : + { + *(.text.exit) + *(.data.exit) + *(.exitcall.exit) + } + + /* This is the MIPS specific mdebug section. */ + .mdebug : { *(.mdebug) } + /* These are needed for ELF backends which have not yet been + converted to the new style linker. */ + .stab 0 : { *(.stab) } + .stabstr 0 : { *(.stabstr) } + /* DWARF debug sections. + Symbols in the .debug DWARF section are relative to the beginning of the + section so we begin .debug at 0. It's not clear yet what needs to happen + for the others. */ + .debug 0 : { *(.debug) } + .debug_srcinfo 0 : { *(.debug_srcinfo) } + .debug_aranges 0 : { *(.debug_aranges) } + .debug_pubnames 0 : { *(.debug_pubnames) } + .debug_sfnames 0 : { *(.debug_sfnames) } + .line 0 : { *(.line) } + /* These must appear regardless of . */ + .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } + .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } + .comment : { *(.comment) } + .note : { *(.note) } +} diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/misc.c b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/misc.c new file mode 100644 index 0000000000..2309feea36 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/compressed/misc.c @@ -0,0 +1,242 @@ +/* + * linux/arch/mips/boot/compressed/misc.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * + * Adapted for JZSOC by Peter Wei, 2008 + * + */ + +#define size_t int +#define NULL 0 + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +#undef memset +#undef memcpy +#define memzero(s, n) memset ((s), 0, (n)) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +#define WSIZE 0x8000 /* Window size must be at least 32k, */ + /* and a power of two */ + +static uch *inbuf; /* input buffer */ +static uch window[WSIZE]; /* Sliding window buffer */ + +static unsigned insize = 0; /* valid bytes in inbuf */ +static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ +static unsigned outcnt = 0; /* bytes in output buffer */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) + +/* Diagnostic functions */ +#ifdef DEBUG +# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +static int fill_inbuf(void); +static void flush_window(void); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +void* memset(void* s, int c, size_t n); +void* memcpy(void* __dest, __const void* __src, size_t __n); + +extern void flushcaches(void); /* defined in head.S */ + +char *input_data; +int input_len; + +static long bytes_out = 0; +static uch *output_data; +static unsigned long output_ptr = 0; + + +static void *malloc(int size); +static void free(void *where); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +static void puts(const char *str) +{ +} + +extern unsigned char _end[]; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; + +#define HEAP_SIZE 0x10000 + +#include "../../../../lib/inflate.c" + +static void *malloc(int size) +{ + void *p; + + if (size <0) error("Malloc error\n"); + if (free_mem_ptr == 0) error("Memory error\n"); + + free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ + + p = (void *)free_mem_ptr; + free_mem_ptr += size; + + if (free_mem_ptr >= free_mem_end_ptr) + error("\nOut of memory\n"); + + return p; +} + +static void free(void *where) +{ /* Don't care */ +} + +static void gzip_mark(void **ptr) +{ + *ptr = (void *) free_mem_ptr; +} + +static void gzip_release(void **ptr) +{ + free_mem_ptr = (long) *ptr; +} + +void* memset(void* s, int c, size_t n) +{ + int i; + char *ss = (char*)s; + + for (i=0;i> 3; i > 0; i--) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 2) { + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1 << 1) { + *d++ = *s++; + *d++ = *s++; + } + + if (__n & 1) + *d++ = *s++; + + return __dest; +} + +/* =========================================================================== + * Fill the input buffer. This is called only when the buffer is empty + * and at least one byte is really needed. + */ +static int fill_inbuf(void) +{ + if (insize != 0) { + error("ran out of input data\n"); + } + + inbuf = input_data; + insize = input_len; + inptr = 1; + return inbuf[0]; +} + +/* =========================================================================== + * Write the output window window[0..outcnt-1] and update crc and bytes_out. + * (Used for the decompressed data only.) + */ +static void flush_window(void) +{ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; + + in = window; + out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out++ = *in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + output_ptr += (ulg)outcnt; + outcnt = 0; +} + +static void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while(1); /* Halt */ +} + +void decompress_kernel(unsigned int imageaddr, unsigned int imagesize, unsigned int loadaddr) +{ + input_data = (char *)imageaddr; + input_len = imagesize; + output_ptr = 0; + output_data = (uch *)loadaddr; + free_mem_ptr = (unsigned long)_end; + free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; + + makecrc(); + puts("Uncompressing Linux..."); + gunzip(); + flushcaches(); + puts("Ok, booting the kernel."); +} diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/tools/entry b/target/linux/xburst/files-2.6.32/arch/mips/boot/tools/entry new file mode 100644 index 0000000000..376e822a63 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/tools/entry @@ -0,0 +1,12 @@ +#!/bin/sh + +# grab the kernel_entry address from the vmlinux elf image +entry=`$1 $2 | grep kernel_entry` + +fs=`echo $entry | grep ffffffff` # check toolchain output + +if [ -n "$fs" ]; then + echo "0x"`$1 $2 | grep kernel_entry | cut -c9- | awk '{print $1}'` +else + echo "0x"`$1 $2 | grep kernel_entry | cut -c1- | awk '{print $1}'` +fi diff --git a/target/linux/xburst/files-2.6.32/arch/mips/boot/tools/filesize b/target/linux/xburst/files-2.6.32/arch/mips/boot/tools/filesize new file mode 100644 index 0000000000..2142ad5af9 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/boot/tools/filesize @@ -0,0 +1,7 @@ +#!/bin/sh +HOSTNAME=`uname` +if [ "$HOSTNAME" = "Linux" ]; then +echo `ls -l $1 | awk '{print $5}'` +else +echo `ls -l $1 | awk '{print $6}'` +fi diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h new file mode 100644 index 0000000000..e5de9da7a4 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/board-qi_lb60.h @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2009 Qi Hardware Inc., + * Author: Xiangfu Liu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef __ASM_JZ4740_QI_LB60_H__ +#define __ASM_JZ4740_QI_LB60_H__ + +#include +/* + * Frequencies of on-board oscillators + */ +#define JZ_EXTAL 12000000 /* Main extal freq: 12 MHz */ +#define JZ_EXTAL_RTC 32768 /* RTC extal freq: 32.768 KHz */ + +/* + * GPIO + */ +#define GPIO_DC_DETE_N JZ_GPIO_PORTC(26) +#define GPIO_CHARG_STAT_N JZ_GPIO_PORTC(27) +#define GPIO_LED_EN JZ_GPIO_PORTC(28) +#define GPIO_LCD_CS JZ_GPIO_PORTC(21) +#define GPIO_DISP_OFF_N JZ_GPIO_PORTD(21) +#define GPIO_PWM JZ_GPIO_PORTD(27) +#define GPIO_WAKEUP_N JZ_GPIO_PORTD(29) + +#define GPIO_AMP_EN JZ_GPIO_PORTD(4) + +#define GPIO_SD_CD_N JZ_GPIO_PORTD(0) +#define GPIO_SD_VCC_EN_N JZ_GPIO_PORTD(2) + +#define GPIO_USB_DETE JZ_GPIO_PORTD(28) +#define GPIO_BUZZ_PWM JZ_GPIO_PORTD(27) +#define GPIO_UDC_HOTPLUG GPIO_USB_DETE + +#define GPIO_AUDIO_POP JZ_GPIO_PORTB(29) +#define GPIO_COB_TEST JZ_GPIO_PORTB(30) + +#define GPIO_KEYOUT_BASE JZ_GPIO_PORTC(10) +#define GPIO_KEYIN_BASE JZ_GPIO_PORTD(18) +#define GPIO_KEYIN_8 JZ_GPIO_PORTD(26) + +#endif /* __ASM_JZ4740_QI_LB60_H__ */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h new file mode 100644 index 0000000000..4869b88f28 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/clock.h @@ -0,0 +1,298 @@ +/* + * linux/include/asm-mips/mach-jz4740/clock.h + * + * JZ4740 clocks definition. + * + * Copyright (C) 2006 - 2007 Ingenic Semiconductor Inc. + * + * Author: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_JZ4740_CLOCK_H__ +#define __ASM_JZ4740_CLOCK_H__ + +#include + +/*************************************************************************** + * CPM + ***************************************************************************/ +#define __cpm_get_pllm() \ + ((REG_CPM_CPPCR & CPM_CPPCR_PLLM_MASK) >> CPM_CPPCR_PLLM_BIT) +#define __cpm_get_plln() \ + ((REG_CPM_CPPCR & CPM_CPPCR_PLLN_MASK) >> CPM_CPPCR_PLLN_BIT) +#define __cpm_get_pllod() \ + ((REG_CPM_CPPCR & CPM_CPPCR_PLLOD_MASK) >> CPM_CPPCR_PLLOD_BIT) + +#define __cpm_get_cdiv() \ + ((REG_CPM_CPCCR & CPM_CPCCR_CDIV_MASK) >> CPM_CPCCR_CDIV_BIT) +#define __cpm_get_hdiv() \ + ((REG_CPM_CPCCR & CPM_CPCCR_HDIV_MASK) >> CPM_CPCCR_HDIV_BIT) +#define __cpm_get_pdiv() \ + ((REG_CPM_CPCCR & CPM_CPCCR_PDIV_MASK) >> CPM_CPCCR_PDIV_BIT) +#define __cpm_get_mdiv() \ + ((REG_CPM_CPCCR & CPM_CPCCR_MDIV_MASK) >> CPM_CPCCR_MDIV_BIT) +#define __cpm_get_ldiv() \ + ((REG_CPM_CPCCR & CPM_CPCCR_LDIV_MASK) >> CPM_CPCCR_LDIV_BIT) +#define __cpm_get_udiv() \ + ((REG_CPM_CPCCR & CPM_CPCCR_UDIV_MASK) >> CPM_CPCCR_UDIV_BIT) +#define __cpm_get_i2sdiv() \ + ((REG_CPM_I2SCDR & CPM_I2SCDR_I2SDIV_MASK) >> CPM_I2SCDR_I2SDIV_BIT) +#define __cpm_get_pixdiv() \ + ((REG_CPM_LPCDR & CPM_LPCDR_PIXDIV_MASK) >> CPM_LPCDR_PIXDIV_BIT) +#define __cpm_get_mscdiv() \ + ((REG_CPM_MSCCDR & CPM_MSCCDR_MSCDIV_MASK) >> CPM_MSCCDR_MSCDIV_BIT) +#define __cpm_get_uhcdiv() \ + ((REG_CPM_UHCCDR & CPM_UHCCDR_UHCDIV_MASK) >> CPM_UHCCDR_UHCDIV_BIT) +#define __cpm_get_ssidiv() \ + ((REG_CPM_SSICCDR & CPM_SSICDR_SSICDIV_MASK) >> CPM_SSICDR_SSIDIV_BIT) + +#define __cpm_set_cdiv(v) \ + (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_CDIV_MASK) | ((v) << (CPM_CPCCR_CDIV_BIT))) +#define __cpm_set_hdiv(v) \ + (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_HDIV_MASK) | ((v) << (CPM_CPCCR_HDIV_BIT))) +#define __cpm_set_pdiv(v) \ + (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_PDIV_MASK) | ((v) << (CPM_CPCCR_PDIV_BIT))) +#define __cpm_set_mdiv(v) \ + (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_MDIV_MASK) | ((v) << (CPM_CPCCR_MDIV_BIT))) +#define __cpm_set_ldiv(v) \ + (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_LDIV_MASK) | ((v) << (CPM_CPCCR_LDIV_BIT))) +#define __cpm_set_udiv(v) \ + (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_UDIV_MASK) | ((v) << (CPM_CPCCR_UDIV_BIT))) +#define __cpm_set_i2sdiv(v) \ + (REG_CPM_I2SCDR = (REG_CPM_I2SCDR & ~CPM_I2SCDR_I2SDIV_MASK) | ((v) << (CPM_I2SCDR_I2SDIV_BIT))) +#define __cpm_set_pixdiv(v) \ + (REG_CPM_LPCDR = (REG_CPM_LPCDR & ~CPM_LPCDR_PIXDIV_MASK) | ((v) << (CPM_LPCDR_PIXDIV_BIT))) +#define __cpm_set_mscdiv(v) \ + (REG_CPM_MSCCDR = (REG_CPM_MSCCDR & ~CPM_MSCCDR_MSCDIV_MASK) | ((v) << (CPM_MSCCDR_MSCDIV_BIT))) +#define __cpm_set_uhcdiv(v) \ + (REG_CPM_UHCCDR = (REG_CPM_UHCCDR & ~CPM_UHCCDR_UHCDIV_MASK) | ((v) << (CPM_UHCCDR_UHCDIV_BIT))) +#define __cpm_ssiclk_select_exclk() \ + (REG_CPM_SSICDR &= ~CPM_SSICDR_SCS) +#define __cpm_ssiclk_select_pllout() \ + (REG_CPM_SSICDR |= CPM_SSICDR_SCS) +#define __cpm_set_ssidiv(v) \ + (REG_CPM_SSICDR = (REG_CPM_SSICDR & ~CPM_SSICDR_SSIDIV_MASK) | ((v) << (CPM_SSICDR_SSIDIV_BIT))) + +#define __cpm_select_i2sclk_exclk() (REG_CPM_CPCCR &= ~CPM_CPCCR_I2CS) +#define __cpm_select_i2sclk_pll() (REG_CPM_CPCCR |= CPM_CPCCR_I2CS) +#define __cpm_enable_cko() (REG_CPM_CPCCR |= CPM_CPCCR_CLKOEN) +#define __cpm_select_usbclk_exclk() (REG_CPM_CPCCR &= ~CPM_CPCCR_UCS) +#define __cpm_select_usbclk_pll() (REG_CPM_CPCCR |= CPM_CPCCR_UCS) +#define __cpm_enable_pll_change() (REG_CPM_CPCCR |= CPM_CPCCR_CE) +#define __cpm_pllout_direct() (REG_CPM_CPCCR |= CPM_CPCCR_PCS) +#define __cpm_pllout_div2() (REG_CPM_CPCCR &= ~CPM_CPCCR_PCS) + +#define __cpm_pll_is_on() (REG_CPM_CPPCR & CPM_CPPCR_PLLS) +#define __cpm_pll_bypass() (REG_CPM_CPPCR |= CPM_CPPCR_PLLBP) +#define __cpm_pll_enable() (REG_CPM_CPPCR |= CPM_CPPCR_PLLEN) + +#define __cpm_get_cclk_doze_duty() \ + ((REG_CPM_LCR & CPM_LCR_DOZE_DUTY_MASK) >> CPM_LCR_DOZE_DUTY_BIT) +#define __cpm_set_cclk_doze_duty(v) \ + (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_DOZE_DUTY_MASK) | ((v) << (CPM_LCR_DOZE_DUTY_BIT))) + +#define __cpm_doze_mode() (REG_CPM_LCR |= CPM_LCR_DOZE_ON) +#define __cpm_idle_mode() \ + (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_LPM_MASK) | CPM_LCR_LPM_IDLE) +#define __cpm_sleep_mode() \ + (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_LPM_MASK) | CPM_LCR_LPM_SLEEP) + +#define __cpm_stop_all() (REG_CPM_CLKGR = 0x7fff) +#define __cpm_stop_uart1() (REG_CPM_CLKGR |= CPM_CLKGR_UART1) +#define __cpm_stop_uhc() (REG_CPM_CLKGR |= CPM_CLKGR_UHC) +#define __cpm_stop_ipu() (REG_CPM_CLKGR |= CPM_CLKGR_IPU) +#define __cpm_stop_dmac() (REG_CPM_CLKGR |= CPM_CLKGR_DMAC) +#define __cpm_stop_udc() (REG_CPM_CLKGR |= CPM_CLKGR_UDC) +#define __cpm_stop_lcd() (REG_CPM_CLKGR |= CPM_CLKGR_LCD) +#define __cpm_stop_cim() (REG_CPM_CLKGR |= CPM_CLKGR_CIM) +#define __cpm_stop_sadc() (REG_CPM_CLKGR |= CPM_CLKGR_SADC) +#define __cpm_stop_msc() (REG_CPM_CLKGR |= CPM_CLKGR_MSC) +#define __cpm_stop_aic1() (REG_CPM_CLKGR |= CPM_CLKGR_AIC1) +#define __cpm_stop_aic2() (REG_CPM_CLKGR |= CPM_CLKGR_AIC2) +#define __cpm_stop_ssi() (REG_CPM_CLKGR |= CPM_CLKGR_SSI) +#define __cpm_stop_i2c() (REG_CPM_CLKGR |= CPM_CLKGR_I2C) +#define __cpm_stop_rtc() (REG_CPM_CLKGR |= CPM_CLKGR_RTC) +#define __cpm_stop_tcu() (REG_CPM_CLKGR |= CPM_CLKGR_TCU) +#define __cpm_stop_uart0() (REG_CPM_CLKGR |= CPM_CLKGR_UART0) + +#define __cpm_start_all() (REG_CPM_CLKGR = 0x0) +#define __cpm_start_uart1() (REG_CPM_CLKGR &= ~CPM_CLKGR_UART1) +#define __cpm_start_uhc() (REG_CPM_CLKGR &= ~CPM_CLKGR_UHC) +#define __cpm_start_ipu() (REG_CPM_CLKGR &= ~CPM_CLKGR_IPU) +#define __cpm_start_dmac() (REG_CPM_CLKGR &= ~CPM_CLKGR_DMAC) +#define __cpm_start_udc() (REG_CPM_CLKGR &= ~CPM_CLKGR_UDC) +#define __cpm_start_lcd() (REG_CPM_CLKGR &= ~CPM_CLKGR_LCD) +#define __cpm_start_cim() (REG_CPM_CLKGR &= ~CPM_CLKGR_CIM) +#define __cpm_start_sadc() (REG_CPM_CLKGR &= ~CPM_CLKGR_SADC) +#define __cpm_start_msc() (REG_CPM_CLKGR &= ~CPM_CLKGR_MSC) +#define __cpm_start_aic1() (REG_CPM_CLKGR &= ~CPM_CLKGR_AIC1) +#define __cpm_start_aic2() (REG_CPM_CLKGR &= ~CPM_CLKGR_AIC2) +#define __cpm_start_ssi() (REG_CPM_CLKGR &= ~CPM_CLKGR_SSI) +#define __cpm_start_i2c() (REG_CPM_CLKGR &= ~CPM_CLKGR_I2C) +#define __cpm_start_rtc() (REG_CPM_CLKGR &= ~CPM_CLKGR_RTC) +#define __cpm_start_tcu() (REG_CPM_CLKGR &= ~CPM_CLKGR_TCU) +#define __cpm_start_uart0() (REG_CPM_CLKGR &= ~CPM_CLKGR_UART0) + +#define __cpm_get_o1st() \ + ((REG_CPM_SCR & CPM_SCR_O1ST_MASK) >> CPM_SCR_O1ST_BIT) +#define __cpm_set_o1st(v) \ + (REG_CPM_SCR = (REG_CPM_SCR & ~CPM_SCR_O1ST_MASK) | ((v) << (CPM_SCR_O1ST_BIT))) +#define __cpm_suspend_usbphy() (REG_CPM_SCR |= CPM_SCR_USBPHY_SUSPEND) +#define __cpm_enable_osc_in_sleep() (REG_CPM_SCR |= CPM_SCR_OSC_ENABLE) + + + +/* + * JZ4740 clocks structure + */ +typedef struct { + unsigned int cclk; /* CPU clock */ + unsigned int hclk; /* System bus clock */ + unsigned int pclk; /* Peripheral bus clock */ + unsigned int mclk; /* Flash/SRAM/SDRAM clock */ + unsigned int lcdclk; /* LCDC module clock */ + unsigned int pixclk; /* LCD pixel clock */ + unsigned int i2sclk; /* AIC module clock */ + unsigned int usbclk; /* USB module clock */ + unsigned int mscclk; /* MSC module clock */ + unsigned int extalclk; /* EXTAL clock for UART,I2C,SSI,TCU,USB-PHY */ + unsigned int rtcclk; /* RTC clock for CPM,INTC,RTC,TCU,WDT */ +} jz_clocks_t; + +extern jz_clocks_t jz_clocks; + + +/* PLL output frequency */ +static __inline__ unsigned int __cpm_get_pllout(void) +{ + unsigned long m, n, no, pllout; + unsigned long cppcr = REG_CPM_CPPCR; + unsigned long od[4] = {1, 2, 2, 4}; + if ((cppcr & CPM_CPPCR_PLLEN) && !(cppcr & CPM_CPPCR_PLLBP)) { + m = __cpm_get_pllm() + 2; + n = __cpm_get_plln() + 2; + no = od[__cpm_get_pllod()]; + pllout = ((JZ_EXTAL) / (n * no)) * m; + } else + pllout = JZ_EXTAL; + return pllout; +} + +/* PLL output frequency for MSC/I2S/LCD/USB */ +static __inline__ unsigned int __cpm_get_pllout2(void) +{ + if (REG_CPM_CPCCR & CPM_CPCCR_PCS) + return __cpm_get_pllout(); + else + return __cpm_get_pllout()/2; +} + +/* CPU core clock */ +static __inline__ unsigned int __cpm_get_cclk(void) +{ + int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; + + return __cpm_get_pllout() / div[__cpm_get_cdiv()]; +} + +/* AHB system bus clock */ +static __inline__ unsigned int __cpm_get_hclk(void) +{ + int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; + + return __cpm_get_pllout() / div[__cpm_get_hdiv()]; +} + +/* Memory bus clock */ +static __inline__ unsigned int __cpm_get_mclk(void) +{ + int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; + + return __cpm_get_pllout() / div[__cpm_get_mdiv()]; +} + +/* APB peripheral bus clock */ +static __inline__ unsigned int __cpm_get_pclk(void) +{ + int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32}; + + return __cpm_get_pllout() / div[__cpm_get_pdiv()]; +} + +/* LCDC module clock */ +static __inline__ unsigned int __cpm_get_lcdclk(void) +{ + return __cpm_get_pllout2() / (__cpm_get_ldiv() + 1); +} + +/* LCD pixel clock */ +static __inline__ unsigned int __cpm_get_pixclk(void) +{ + return __cpm_get_pllout2() / (__cpm_get_pixdiv() + 1); +} + +/* I2S clock */ +static __inline__ unsigned int __cpm_get_i2sclk(void) +{ + if (REG_CPM_CPCCR & CPM_CPCCR_I2CS) { + return __cpm_get_pllout2() / (__cpm_get_i2sdiv() + 1); + } + else { + return JZ_EXTAL; + } +} + +/* USB clock */ +static __inline__ unsigned int __cpm_get_usbclk(void) +{ + if (REG_CPM_CPCCR & CPM_CPCCR_UCS) { + return __cpm_get_pllout2() / (__cpm_get_udiv() + 1); + } + else { + return JZ_EXTAL; + } +} + +/* MSC clock */ +static __inline__ unsigned int __cpm_get_mscclk(void) +{ + return __cpm_get_pllout2() / (__cpm_get_mscdiv() + 1); +} + +/* EXTAL clock for UART,I2C,SSI,TCU,USB-PHY */ +static __inline__ unsigned int __cpm_get_extalclk(void) +{ + return JZ_EXTAL; +} + +/* RTC clock for CPM,INTC,RTC,TCU,WDT */ +static __inline__ unsigned int __cpm_get_rtcclk(void) +{ + return JZ_EXTAL_RTC; +} + +/* + * Output 24MHz for SD and 16MHz for MMC. + */ +static inline void __cpm_select_msc_clk(int sd) +{ + unsigned int pllout2 = __cpm_get_pllout2(); + unsigned int div = 0; + + if (sd) { + div = pllout2 / 24000000; + } + else { + div = pllout2 / 16000000; + } + + REG_CPM_MSCCDR = div - 1; +} + +int jz_init_clocks(unsigned long ext_rate); + +#endif /* __ASM_JZ4740_CLOCK_H__ */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/dma.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/dma.h new file mode 100644 index 0000000000..e7f474e4c5 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/dma.h @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2010, Lars-Peter Clausen + * JZ7420/JZ4740 DMA definitions + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __ASM_MACH_JZ4740_DMA_H__ +#define __ASM_MACH_JZ4740_DMA_H__ + +struct jz4740_dma_chan; + +enum jz4740_dma_request_type { + JZ4740_DMA_TYPE_AUTO_REQUEST = 8, + JZ4740_DMA_TYPE_UART_TRANSMIT = 20, + JZ4740_DMA_TYPE_UART_RECEIVE = 21, + JZ4740_DMA_TYPE_SPI_TRANSMIT = 22, + JZ4740_DMA_TYPE_SPI_RECEIVE = 23, + JZ4740_DMA_TYPE_AIC_TRANSMIT = 24, + JZ4740_DMA_TYPE_AIC_RECEIVE = 25, + JZ4740_DMA_TYPE_MMC_TRANSMIT = 26, + JZ4740_DMA_TYPE_MMC_RECEIVE = 27, + JZ4740_DMA_TYPE_TCU = 28, + JZ4740_DMA_TYPE_SADC = 29, + JZ4740_DMA_TYPE_SLCD = 30, +}; + +enum jz4740_dma_width { + JZ4740_DMA_WIDTH_8BIT, + JZ4740_DMA_WIDTH_16BIT, + JZ4740_DMA_WIDTH_32BIT, +}; + +enum jz4740_dma_transfer_size { + JZ4740_DMA_TRANSFER_SIZE_4BYTE = 0, + JZ4740_DMA_TRANSFER_SIZE_1BYTE = 1, + JZ4740_DMA_TRANSFER_SIZE_2BYTE = 2, + JZ4740_DMA_TRANSFER_SIZE_16BYTE = 3, + JZ4740_DMA_TRANSFER_SIZE_32BYTE = 4, +}; + +enum jz4740_dma_flags { + JZ4740_DMA_SRC_AUTOINC = 0x2, + JZ4740_DMA_DST_AUTOINC = 0x1, +}; + +enum jz4740_dma_mode { + JZ4740_DMA_MODE_SINGLE = 0, + JZ4740_DMA_MODE_BLOCK = 1, +}; + +struct jz4740_dma_config { + enum jz4740_dma_width src_width; + enum jz4740_dma_width dst_width; + enum jz4740_dma_transfer_size transfer_size; + enum jz4740_dma_request_type request_type; + enum jz4740_dma_flags flags; + enum jz4740_dma_mode mode; +}; + +typedef void (*jz4740_dma_complete_callback_t)(struct jz4740_dma_chan *, int , void *); + +struct jz4740_dma_chan* jz4740_dma_request(void *dev, const char *name); +void jz4740_dma_free(struct jz4740_dma_chan *dma); + +void jz4740_dma_configure(struct jz4740_dma_chan *dma, + const struct jz4740_dma_config *config); + + +void jz4740_dma_enable(struct jz4740_dma_chan *dma); +void jz4740_dma_disable(struct jz4740_dma_chan *dma); + +void jz4740_dma_set_src_addr(struct jz4740_dma_chan *dma, dma_addr_t src); +void jz4740_dma_set_dst_addr(struct jz4740_dma_chan *dma, dma_addr_t dst); +void jz4740_dma_set_transfer_count(struct jz4740_dma_chan *dma, uint32_t count); + +uint32_t jz4740_dma_get_residue(const struct jz4740_dma_chan *dma); + +void jz4740_dma_set_complete_cb(struct jz4740_dma_chan *dma, + jz4740_dma_complete_callback_t cb); + +#endif /* __ASM_JZ4740_DMA_H__ */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/gpio.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/gpio.h new file mode 100644 index 0000000000..90d37ddd06 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/gpio.h @@ -0,0 +1,393 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen + * JZ7420/JZ4740 GPIO pin definitions + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _JZ_GPIO_H +#define _JZ_GPIO_H + +#include + +enum jz_gpio_function { + JZ_GPIO_FUNC_NONE, + JZ_GPIO_FUNC1, + JZ_GPIO_FUNC2, + JZ_GPIO_FUNC3, +}; + + +/* + Usually a driver for a SoC component has to request several gpio pins and + configure them as funcion pins. + jz_gpio_bulk_request can be used to ease this process. + Usually one would do something like: + + const static struct jz_gpio_bulk_request i2c_pins[] = { + JZ_GPIO_BULK_PIN(I2C_SDA), + JZ_GPIO_BULK_PIN(I2C_SCK), + }; + + inside the probe function: + + ret = jz_gpio_bulk_request(i2c_pins, ARRAY_SIZE(i2c_pins)); + if (ret) { + ... + + inside the remove function: + + jz_gpio_bulk_free(i2c_pins, ARRAY_SIZE(i2c_pins)); + + +*/ +struct jz_gpio_bulk_request { + int gpio; + const char *name; + enum jz_gpio_function function; +}; + +#define JZ_GPIO_BULK_PIN(pin) { \ + .gpio = JZ_GPIO_ ## pin, \ + .name = #pin, \ + .function = JZ_GPIO_FUNC_ ## pin \ +} + +int jz_gpio_bulk_request(const struct jz_gpio_bulk_request *request, size_t num); +void jz_gpio_bulk_free(const struct jz_gpio_bulk_request *request, size_t num); +void jz_gpio_bulk_suspend(const struct jz_gpio_bulk_request *request, size_t num); +void jz_gpio_bulk_resume(const struct jz_gpio_bulk_request *request, size_t num); +void jz_gpio_enable_pullup(unsigned gpio); +void jz_gpio_disable_pullup(unsigned gpio); +int jz_gpio_set_function(int gpio, enum jz_gpio_function function); + +int jz_gpio_port_direction_input(int port, uint32_t mask); +int jz_gpio_port_direction_output(int port, uint32_t mask); +void jz_gpio_port_set_value(int port, uint32_t value, uint32_t mask); +uint32_t jz_gpio_port_get_value(int port, uint32_t mask); + +#include + +#define JZ_GPIO_PORTA(x) (x + 32 * 0) +#define JZ_GPIO_PORTB(x) (x + 32 * 1) +#define JZ_GPIO_PORTC(x) (x + 32 * 2) +#define JZ_GPIO_PORTD(x) (x + 32 * 3) + +/* Port A function pins */ +#define JZ_GPIO_MEM_DATA0 JZ_GPIO_PORTA(0) +#define JZ_GPIO_MEM_DATA1 JZ_GPIO_PORTA(1) +#define JZ_GPIO_MEM_DATA2 JZ_GPIO_PORTA(2) +#define JZ_GPIO_MEM_DATA3 JZ_GPIO_PORTA(3) +#define JZ_GPIO_MEM_DATA4 JZ_GPIO_PORTA(4) +#define JZ_GPIO_MEM_DATA5 JZ_GPIO_PORTA(5) +#define JZ_GPIO_MEM_DATA6 JZ_GPIO_PORTA(6) +#define JZ_GPIO_MEM_DATA7 JZ_GPIO_PORTA(7) +#define JZ_GPIO_MEM_DATA8 JZ_GPIO_PORTA(8) +#define JZ_GPIO_MEM_DATA9 JZ_GPIO_PORTA(9) +#define JZ_GPIO_MEM_DATA10 JZ_GPIO_PORTA(10) +#define JZ_GPIO_MEM_DATA11 JZ_GPIO_PORTA(11) +#define JZ_GPIO_MEM_DATA12 JZ_GPIO_PORTA(12) +#define JZ_GPIO_MEM_DATA13 JZ_GPIO_PORTA(13) +#define JZ_GPIO_MEM_DATA14 JZ_GPIO_PORTA(14) +#define JZ_GPIO_MEM_DATA15 JZ_GPIO_PORTA(15) +#define JZ_GPIO_MEM_DATA16 JZ_GPIO_PORTA(16) +#define JZ_GPIO_MEM_DATA17 JZ_GPIO_PORTA(17) +#define JZ_GPIO_MEM_DATA18 JZ_GPIO_PORTA(18) +#define JZ_GPIO_MEM_DATA19 JZ_GPIO_PORTA(19) +#define JZ_GPIO_MEM_DATA20 JZ_GPIO_PORTA(20) +#define JZ_GPIO_MEM_DATA21 JZ_GPIO_PORTA(21) +#define JZ_GPIO_MEM_DATA22 JZ_GPIO_PORTA(22) +#define JZ_GPIO_MEM_DATA23 JZ_GPIO_PORTA(23) +#define JZ_GPIO_MEM_DATA24 JZ_GPIO_PORTA(24) +#define JZ_GPIO_MEM_DATA25 JZ_GPIO_PORTA(25) +#define JZ_GPIO_MEM_DATA26 JZ_GPIO_PORTA(26) +#define JZ_GPIO_MEM_DATA27 JZ_GPIO_PORTA(27) +#define JZ_GPIO_MEM_DATA28 JZ_GPIO_PORTA(28) +#define JZ_GPIO_MEM_DATA29 JZ_GPIO_PORTA(29) +#define JZ_GPIO_MEM_DATA30 JZ_GPIO_PORTA(30) +#define JZ_GPIO_MEM_DATA31 JZ_GPIO_PORTA(31) + +#define JZ_GPIO_FUNC_MEM_DATA0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA4 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA5 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA6 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA7 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA8 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA9 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA10 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA11 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA12 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA13 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA14 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA15 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA16 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA17 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA18 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA19 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA20 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA21 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA22 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA23 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA24 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA25 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA26 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA27 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA28 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA29 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA30 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DATA31 JZ_GPIO_FUNC1 + +/* Port B function pins */ +#define JZ_GPIO_MEM_ADDR0 JZ_GPIO_PORTB(0) +#define JZ_GPIO_MEM_ADDR1 JZ_GPIO_PORTB(1) +#define JZ_GPIO_MEM_ADDR2 JZ_GPIO_PORTB(2) +#define JZ_GPIO_MEM_ADDR3 JZ_GPIO_PORTB(3) +#define JZ_GPIO_MEM_ADDR4 JZ_GPIO_PORTB(4) +#define JZ_GPIO_MEM_ADDR5 JZ_GPIO_PORTB(5) +#define JZ_GPIO_MEM_ADDR6 JZ_GPIO_PORTB(6) +#define JZ_GPIO_MEM_ADDR7 JZ_GPIO_PORTB(7) +#define JZ_GPIO_MEM_ADDR8 JZ_GPIO_PORTB(8) +#define JZ_GPIO_MEM_ADDR9 JZ_GPIO_PORTB(9) +#define JZ_GPIO_MEM_ADDR10 JZ_GPIO_PORTB(10) +#define JZ_GPIO_MEM_ADDR11 JZ_GPIO_PORTB(11) +#define JZ_GPIO_MEM_ADDR12 JZ_GPIO_PORTB(12) +#define JZ_GPIO_MEM_ADDR13 JZ_GPIO_PORTB(13) +#define JZ_GPIO_MEM_ADDR14 JZ_GPIO_PORTB(14) +#define JZ_GPIO_MEM_ADDR15 JZ_GPIO_PORTB(15) +#define JZ_GPIO_MEM_ADDR16 JZ_GPIO_PORTB(16) +#define JZ_GPIO_MEM_CLS JZ_GPIO_PORTB(17) +#define JZ_GPIO_MEM_SPL JZ_GPIO_PORTB(18) +#define JZ_GPIO_MEM_DCS JZ_GPIO_PORTB(19) +#define JZ_GPIO_MEM_RAS JZ_GPIO_PORTB(20) +#define JZ_GPIO_MEM_CAS JZ_GPIO_PORTB(21) +#define JZ_GPIO_MEM_SDWE JZ_GPIO_PORTB(22) +#define JZ_GPIO_MEM_CKE JZ_GPIO_PORTB(23) +#define JZ_GPIO_MEM_CKO JZ_GPIO_PORTB(24) +#define JZ_GPIO_MEM_CS0 JZ_GPIO_PORTB(25) +#define JZ_GPIO_MEM_CS1 JZ_GPIO_PORTB(26) +#define JZ_GPIO_MEM_CS2 JZ_GPIO_PORTB(27) +#define JZ_GPIO_MEM_CS3 JZ_GPIO_PORTB(28) +#define JZ_GPIO_MEM_RD JZ_GPIO_PORTB(29) +#define JZ_GPIO_MEM_WR JZ_GPIO_PORTB(30) +#define JZ_GPIO_MEM_WE0 JZ_GPIO_PORTB(31) + +#define JZ_GPIO_FUNC_MEM_ADDR0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR4 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR5 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR6 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR7 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR8 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR9 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR10 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR11 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR12 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR13 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR14 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR15 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_ADDR16 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CLS JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_SPL JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_DCS JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_RAS JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CAS JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_SDWE JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CKE JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CKO JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CS0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CS1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CS2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_CS3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_RD JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_WR JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_WE0 JZ_GPIO_FUNC1 + + +#define JZ_GPIO_MEM_ADDR21 JZ_GPIO_PORTB(17) +#define JZ_GPIO_MEM_ADDR22 JZ_GPIO_PORTB(18) + +#define JZ_GPIO_FUNC_MEM_ADDR21 JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_ADDR22 JZ_GPIO_FUNC2 + +/* Port C function pins */ +#define JZ_GPIO_LCD_DATA0 JZ_GPIO_PORTC(0) +#define JZ_GPIO_LCD_DATA1 JZ_GPIO_PORTC(1) +#define JZ_GPIO_LCD_DATA2 JZ_GPIO_PORTC(2) +#define JZ_GPIO_LCD_DATA3 JZ_GPIO_PORTC(3) +#define JZ_GPIO_LCD_DATA4 JZ_GPIO_PORTC(4) +#define JZ_GPIO_LCD_DATA5 JZ_GPIO_PORTC(5) +#define JZ_GPIO_LCD_DATA6 JZ_GPIO_PORTC(6) +#define JZ_GPIO_LCD_DATA7 JZ_GPIO_PORTC(7) +#define JZ_GPIO_LCD_DATA8 JZ_GPIO_PORTC(8) +#define JZ_GPIO_LCD_DATA9 JZ_GPIO_PORTC(9) +#define JZ_GPIO_LCD_DATA10 JZ_GPIO_PORTC(10) +#define JZ_GPIO_LCD_DATA11 JZ_GPIO_PORTC(11) +#define JZ_GPIO_LCD_DATA12 JZ_GPIO_PORTC(12) +#define JZ_GPIO_LCD_DATA13 JZ_GPIO_PORTC(13) +#define JZ_GPIO_LCD_DATA14 JZ_GPIO_PORTC(14) +#define JZ_GPIO_LCD_DATA15 JZ_GPIO_PORTC(15) +#define JZ_GPIO_LCD_DATA16 JZ_GPIO_PORTC(16) +#define JZ_GPIO_LCD_DATA17 JZ_GPIO_PORTC(17) +#define JZ_GPIO_LCD_PCLK JZ_GPIO_PORTC(18) +#define JZ_GPIO_LCD_HSYNC JZ_GPIO_PORTC(19) +#define JZ_GPIO_LCD_VSYNC JZ_GPIO_PORTC(20) +#define JZ_GPIO_LCD_DE JZ_GPIO_PORTC(21) +#define JZ_GPIO_LCD_PS JZ_GPIO_PORTC(22) +#define JZ_GPIO_LCD_REV JZ_GPIO_PORTC(23) +#define JZ_GPIO_MEM_WE1 JZ_GPIO_PORTC(24) +#define JZ_GPIO_MEM_WE2 JZ_GPIO_PORTC(25) +#define JZ_GPIO_MEM_WE3 JZ_GPIO_PORTC(26) +#define JZ_GPIO_MEM_WAIT JZ_GPIO_PORTC(27) +#define JZ_GPIO_MEM_FRE JZ_GPIO_PORTC(28) +#define JZ_GPIO_MEM_FWE JZ_GPIO_PORTC(29) + +#define JZ_GPIO_FUNC_LCD_DATA0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA4 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA5 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA6 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA7 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA8 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA9 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA10 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA11 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA12 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA13 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA14 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA15 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA16 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DATA17 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_PCLK JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_VSYNC JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_HSYNC JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_DE JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_PS JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_LCD_REV JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_WE1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_WE2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_WE3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_WAIT JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_FRE JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MEM_FWE JZ_GPIO_FUNC1 + + +#define JZ_GPIO_MEM_ADDR19 JZ_GPIO_PORTB(22) +#define JZ_GPIO_MEM_ADDR20 JZ_GPIO_PORTB(23) + +#define JZ_GPIO_FUNC_MEM_ADDR19 JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_ADDR20 JZ_GPIO_FUNC2 + +/* Port D function pins */ +#define JZ_GPIO_CIM_DATA0 JZ_GPIO_PORTD(0) +#define JZ_GPIO_CIM_DATA1 JZ_GPIO_PORTD(1) +#define JZ_GPIO_CIM_DATA2 JZ_GPIO_PORTD(2) +#define JZ_GPIO_CIM_DATA3 JZ_GPIO_PORTD(3) +#define JZ_GPIO_CIM_DATA4 JZ_GPIO_PORTD(4) +#define JZ_GPIO_CIM_DATA5 JZ_GPIO_PORTD(5) +#define JZ_GPIO_CIM_DATA6 JZ_GPIO_PORTD(6) +#define JZ_GPIO_CIM_DATA7 JZ_GPIO_PORTD(7) +#define JZ_GPIO_MSC_CMD JZ_GPIO_PORTD(8) +#define JZ_GPIO_MSC_CLK JZ_GPIO_PORTD(9) +#define JZ_GPIO_MSC_DATA0 JZ_GPIO_PORTD(10) +#define JZ_GPIO_MSC_DATA1 JZ_GPIO_PORTD(11) +#define JZ_GPIO_MSC_DATA2 JZ_GPIO_PORTD(12) +#define JZ_GPIO_MSC_DATA3 JZ_GPIO_PORTD(13) +#define JZ_GPIO_CIM_MCLK JZ_GPIO_PORTD(14) +#define JZ_GPIO_CIM_PCLK JZ_GPIO_PORTD(15) +#define JZ_GPIO_CIM_VSYNC JZ_GPIO_PORTD(16) +#define JZ_GPIO_CIM_HSYNC JZ_GPIO_PORTD(17) +#define JZ_GPIO_SPI_CLK JZ_GPIO_PORTD(18) +#define JZ_GPIO_SPI_CE0 JZ_GPIO_PORTD(19) +#define JZ_GPIO_SPI_DT JZ_GPIO_PORTD(20) +#define JZ_GPIO_SPI_DR JZ_GPIO_PORTD(21) +#define JZ_GPIO_SPI_CE1 JZ_GPIO_PORTD(22) +#define JZ_GPIO_PWM0 JZ_GPIO_PORTD(23) +#define JZ_GPIO_PWM1 JZ_GPIO_PORTD(24) +#define JZ_GPIO_PWM2 JZ_GPIO_PORTD(25) +#define JZ_GPIO_PWM3 JZ_GPIO_PORTD(26) +#define JZ_GPIO_PWM4 JZ_GPIO_PORTD(27) +#define JZ_GPIO_PWM5 JZ_GPIO_PORTD(28) +#define JZ_GPIO_PWM6 JZ_GPIO_PORTD(30) +#define JZ_GPIO_PWM7 JZ_GPIO_PORTD(31) + +#define JZ_GPIO_FUNC_CIM_DATA0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_DATA1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_DATA2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_DATA3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_DATA4 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_DATA5 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_DATA6 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_DATA7 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MSC_CMD JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MSC_CLK JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MSC_DATA0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MSC_DATA1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MSC_DATA2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_MSC_DATA3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_MCLK JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_PCLK JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_VSYNC JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_CIM_HSYNC JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_SPI_CLK JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_SPI_CE0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_SPI_DT JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_SPI_DR JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_SPI_CE1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_PWM0 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_PWM1 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_PWM2 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_PWM3 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_PWM4 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_PWM5 JZ_GPIO_FUNC1 +#define JZ_GPIO_FUNC_PWM6 JZ_GPIO_FUNC1 + +#define JZ_GPIO_MEM_SCLK_RSTN JZ_GPIO_PORTD(18) +#define JZ_GPIO_MEM_BCLK JZ_GPIO_PORTD(19) +#define JZ_GPIO_MEM_SDATO JZ_GPIO_PORTD(20) +#define JZ_GPIO_MEM_SDATI JZ_GPIO_PORTD(21) +#define JZ_GPIO_MEM_SYNC JZ_GPIO_PORTD(22) +#define JZ_GPIO_I2C_SDA JZ_GPIO_PORTD(23) +#define JZ_GPIO_I2C_SCK JZ_GPIO_PORTD(24) +#define JZ_GPIO_UART0_TXD JZ_GPIO_PORTD(25) +#define JZ_GPIO_UART0_RXD JZ_GPIO_PORTD(26) +#define JZ_GPIO_MEM_ADDR17 JZ_GPIO_PORTD(27) +#define JZ_GPIO_MEM_ADDR18 JZ_GPIO_PORTD(28) +#define JZ_GPIO_UART0_CTS JZ_GPIO_PORTD(30) +#define JZ_GPIO_UART0_RTS JZ_GPIO_PORTD(31) + +#define JZ_GPIO_FUNC_MEM_SCLK_RSTN JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_BCLK JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_SDATO JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_SDATI JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_SYNC JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_I2C_SDA JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_I2C_SCK JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_UART0_TXD JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_UART0_RXD JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_ADDR17 JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_MEM_ADDR18 JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_UART0_CTS JZ_GPIO_FUNC2 +#define JZ_GPIO_FUNC_UART0_RTS JZ_GPIO_FUNC2 + +#define JZ_GPIO_UART1_RXD JZ_GPIO_PORTD(30) +#define JZ_GPIO_UART1_TXD JZ_GPIO_PORTD(31) + +#define JZ_GPIO_FUNC_UART1_RXD JZ_GPIO_FUNC3 +#define JZ_GPIO_FUNC_UART1_TXD JZ_GPIO_FUNC3 + +#endif diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/irq.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/irq.h new file mode 100644 index 0000000000..59f0ea51a6 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/irq.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2009-2010, Lars-Peter Clausen + * JZ7420/JZ4740 IRQ definitions + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __ASM_MACH_JZ4740_IRQ_H__ +#define __ASM_MACH_JZ4740_IRQ_H__ + +#define MIPS_CPU_IRQ_BASE 0 +#define JZ_IRQ_BASE 8 + +/* 1st-level interrupts */ +#define JZ_IRQ(x) (JZ_IRQ_BASE + (x)) +#define JZ_IRQ_I2C JZ_IRQ(1) +#define JZ_IRQ_UHC JZ_IRQ(3) +#define JZ_IRQ_UART1 JZ_IRQ(8) +#define JZ_IRQ_UART0 JZ_IRQ(9) +#define JZ_IRQ_SADC JZ_IRQ(12) +#define JZ_IRQ_MSC JZ_IRQ(14) +#define JZ_IRQ_RTC JZ_IRQ(15) +#define JZ_IRQ_SSI JZ_IRQ(16) +#define JZ_IRQ_CIM JZ_IRQ(17) +#define JZ_IRQ_AIC JZ_IRQ(18) +#define JZ_IRQ_ETH JZ_IRQ(19) +#define JZ_IRQ_DMAC JZ_IRQ(20) +#define JZ_IRQ_TCU2 JZ_IRQ(21) +#define JZ_IRQ_TCU1 JZ_IRQ(22) +#define JZ_IRQ_TCU0 JZ_IRQ(23) +#define JZ_IRQ_UDC JZ_IRQ(24) +#define JZ_IRQ_GPIO3 JZ_IRQ(25) +#define JZ_IRQ_GPIO2 JZ_IRQ(26) +#define JZ_IRQ_GPIO1 JZ_IRQ(27) +#define JZ_IRQ_GPIO0 JZ_IRQ(28) +#define JZ_IRQ_IPU JZ_IRQ(29) +#define JZ_IRQ_LCD JZ_IRQ(30) + +/* 2nd-level interrupts */ +#define JZ_IRQ_DMA(x) ((x) + JZ_IRQ(32)) /* 32 to 37 for DMAC channel 0 to 5 */ + +#define JZ_IRQ_INTC_GPIO(x) (JZ_IRQ_GPIO0 - (x)) +#define JZ_IRQ_GPIO(x) (JZ_IRQ(48) + (x)) + +#define NR_IRQS (JZ_IRQ_GPIO(127) + 1) + +#endif diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h new file mode 100644 index 0000000000..7f9293a9aa --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/jz4740.h @@ -0,0 +1,38 @@ +/* + * linux/include/asm-mips/mach-jz4740/jz4740.h + * + * JZ4740 common definition. + * + * Copyright (C) 2006 - 2007 Ingenic Semiconductor Inc. + * + * Author: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_JZ4740_H__ +#define __ASM_JZ4740_H__ + +#include +#include + +/*------------------------------------------------------------------ + * Platform definitions + */ + +#ifdef CONFIG_JZ4740_QI_LB60 +#include +#endif + +/* Add other platform definition here ... */ + + +/*------------------------------------------------------------------ + * Follows are related to platform definitions + */ + +#include + +#endif /* __ASM_JZ4740_H__ */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/platform.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/platform.h new file mode 100644 index 0000000000..42de1c13ad --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/platform.h @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen + * JZ7420/JZ4740 platform device definitions + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + + +#ifndef __JZ4740_PLATFORM_H +#define __JZ4740_PLATFORM_H + +#include + +extern struct platform_device jz4740_usb_ohci_device; +extern struct platform_device jz4740_usb_gdt_device; +extern struct platform_device jz4740_mmc_device; +extern struct platform_device jz4740_rtc_device; +extern struct platform_device jz4740_i2c_device; +extern struct platform_device jz4740_nand_device; +extern struct platform_device jz4740_framebuffer_device; +extern struct platform_device jz4740_i2s_device; +extern struct platform_device jz4740_codec_device; +extern struct platform_device jz4740_adc_device; +extern struct platform_device jz4740_battery_device; + +#endif diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/regs.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/regs.h new file mode 100644 index 0000000000..3046fee81c --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/regs.h @@ -0,0 +1,675 @@ +/* + * linux/include/asm-mips/mach-jz4740/regs.h + * + * Ingenic's JZ4740 common include. + * + * Copyright (C) 2006 - 2007 Ingenic Semiconductor Inc. + * + * Author: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __JZ4740_REGS_H__ +#define __JZ4740_REGS_H__ + +#if defined(__ASSEMBLY__) || defined(__LANGUAGE_ASSEMBLY) +#define REG8(addr) (addr) +#define REG16(addr) (addr) +#define REG32(addr) (addr) +#else +#define REG8(addr) *((volatile unsigned char *)(addr)) +#define REG16(addr) *((volatile unsigned short *)(addr)) +#define REG32(addr) *((volatile unsigned int *)(addr)) +#endif + +/* + * Define the module base addresses + */ +#define CPM_BASE 0xB0000000 +#define INTC_BASE 0xB0001000 +#define TCU_BASE 0xB0002000 +#define WDT_BASE 0xB0002000 +#define RTC_BASE 0xB0003000 +#define GPIO_BASE 0xB0010000 +#define AIC_BASE 0xB0020000 +#define ICDC_BASE 0xB0020000 +#define MSC_BASE 0xB0021000 +#define UART0_BASE 0xB0030000 +#define UART1_BASE 0xB0031000 +#define I2C_BASE 0xB0042000 +#define SSI_BASE 0xB0043000 +#define SADC_BASE 0xB0070000 +#define EMC_BASE 0xB3010000 +#define DMAC_BASE 0xB3020000 +#define UHC_BASE 0xB3030000 +#define UDC_BASE 0xB3040000 +#define LCD_BASE 0xB3050000 +#define SLCD_BASE 0xB3050000 +#define CIM_BASE 0xB3060000 +#define IPU_BASE 0xB3080000 +#define ETH_BASE 0xB3100000 + +/************************************************************************* + * CPM (Clock reset and Power control Management) + *************************************************************************/ +#define CPM_CPCCR (CPM_BASE+0x00) +#define CPM_CPPCR (CPM_BASE+0x10) +#define CPM_I2SCDR (CPM_BASE+0x60) +#define CPM_LPCDR (CPM_BASE+0x64) +#define CPM_MSCCDR (CPM_BASE+0x68) +#define CPM_UHCCDR (CPM_BASE+0x6C) +#define CPM_SSICDR (CPM_BASE+0x74) + +#define CPM_LCR (CPM_BASE+0x04) +#define CPM_CLKGR (CPM_BASE+0x20) +#define CPM_SCR (CPM_BASE+0x24) + +#define CPM_HCR (CPM_BASE+0x30) +#define CPM_HWFCR (CPM_BASE+0x34) +#define CPM_HRCR (CPM_BASE+0x38) +#define CPM_HWCR (CPM_BASE+0x3c) +#define CPM_HWSR (CPM_BASE+0x40) +#define CPM_HSPR (CPM_BASE+0x44) + +#define CPM_RSR (CPM_BASE+0x08) + +#define REG_CPM_CPCCR REG32(CPM_CPCCR) +#define REG_CPM_CPPCR REG32(CPM_CPPCR) +#define REG_CPM_I2SCDR REG32(CPM_I2SCDR) +#define REG_CPM_LPCDR REG32(CPM_LPCDR) +#define REG_CPM_MSCCDR REG32(CPM_MSCCDR) +#define REG_CPM_UHCCDR REG32(CPM_UHCCDR) +#define REG_CPM_SSICDR REG32(CPM_SSICDR) + +#define REG_CPM_LCR REG32(CPM_LCR) +#define REG_CPM_CLKGR REG32(CPM_CLKGR) +#define REG_CPM_SCR REG32(CPM_SCR) +#define REG_CPM_HCR REG32(CPM_HCR) +#define REG_CPM_HWFCR REG32(CPM_HWFCR) +#define REG_CPM_HRCR REG32(CPM_HRCR) +#define REG_CPM_HWCR REG32(CPM_HWCR) +#define REG_CPM_HWSR REG32(CPM_HWSR) +#define REG_CPM_HSPR REG32(CPM_HSPR) + +#define REG_CPM_RSR REG32(CPM_RSR) + +/* Clock Control Register */ +#define CPM_CPCCR_I2CS (1 << 31) +#define CPM_CPCCR_CLKOEN (1 << 30) +#define CPM_CPCCR_UCS (1 << 29) +#define CPM_CPCCR_UDIV_BIT 23 +#define CPM_CPCCR_UDIV_MASK (0x3f << CPM_CPCCR_UDIV_BIT) +#define CPM_CPCCR_CE (1 << 22) +#define CPM_CPCCR_PCS (1 << 21) +#define CPM_CPCCR_LDIV_BIT 16 +#define CPM_CPCCR_LDIV_MASK (0x1f << CPM_CPCCR_LDIV_BIT) +#define CPM_CPCCR_MDIV_BIT 12 +#define CPM_CPCCR_MDIV_MASK (0x0f << CPM_CPCCR_MDIV_BIT) +#define CPM_CPCCR_PDIV_BIT 8 +#define CPM_CPCCR_PDIV_MASK (0x0f << CPM_CPCCR_PDIV_BIT) +#define CPM_CPCCR_HDIV_BIT 4 +#define CPM_CPCCR_HDIV_MASK (0x0f << CPM_CPCCR_HDIV_BIT) +#define CPM_CPCCR_CDIV_BIT 0 +#define CPM_CPCCR_CDIV_MASK (0x0f << CPM_CPCCR_CDIV_BIT) + +/* I2S Clock Divider Register */ +#define CPM_I2SCDR_I2SDIV_BIT 0 +#define CPM_I2SCDR_I2SDIV_MASK (0x1ff << CPM_I2SCDR_I2SDIV_BIT) + +/* LCD Pixel Clock Divider Register */ +#define CPM_LPCDR_PIXDIV_BIT 0 +#define CPM_LPCDR_PIXDIV_MASK (0x7ff << CPM_LPCDR_PIXDIV_BIT) + +/* MSC Clock Divider Register */ +#define CPM_MSCCDR_MSCDIV_BIT 0 +#define CPM_MSCCDR_MSCDIV_MASK (0x1f << CPM_MSCCDR_MSCDIV_BIT) + +/* UHC Clock Divider Register */ +#define CPM_UHCCDR_UHCDIV_BIT 0 +#define CPM_UHCCDR_UHCDIV_MASK (0xf << CPM_UHCCDR_UHCDIV_BIT) + +/* SSI Clock Divider Register */ +#define CPM_SSICDR_SCS (1<<31) /* SSI clock source selection, 0:EXCLK, 1: PLL */ +#define CPM_SSICDR_SSIDIV_BIT 0 +#define CPM_SSICDR_SSIDIV_MASK (0xf << CPM_SSICDR_SSIDIV_BIT) + +/* PLL Control Register */ +#define CPM_CPPCR_PLLM_BIT 23 +#define CPM_CPPCR_PLLM_MASK (0x1ff << CPM_CPPCR_PLLM_BIT) +#define CPM_CPPCR_PLLN_BIT 18 +#define CPM_CPPCR_PLLN_MASK (0x1f << CPM_CPPCR_PLLN_BIT) +#define CPM_CPPCR_PLLOD_BIT 16 +#define CPM_CPPCR_PLLOD_MASK (0x03 << CPM_CPPCR_PLLOD_BIT) +#define CPM_CPPCR_PLLS (1 << 10) +#define CPM_CPPCR_PLLBP (1 << 9) +#define CPM_CPPCR_PLLEN (1 << 8) +#define CPM_CPPCR_PLLST_BIT 0 +#define CPM_CPPCR_PLLST_MASK (0xff << CPM_CPPCR_PLLST_BIT) + +/* Low Power Control Register */ +#define CPM_LCR_DOZE_DUTY_BIT 3 +#define CPM_LCR_DOZE_DUTY_MASK (0x1f << CPM_LCR_DOZE_DUTY_BIT) +#define CPM_LCR_DOZE_ON (1 << 2) +#define CPM_LCR_LPM_BIT 0 +#define CPM_LCR_LPM_MASK (0x3 << CPM_LCR_LPM_BIT) + #define CPM_LCR_LPM_IDLE (0x0 << CPM_LCR_LPM_BIT) + #define CPM_LCR_LPM_SLEEP (0x1 << CPM_LCR_LPM_BIT) + +/* Clock Gate Register */ +#define CPM_CLKGR_UART1 (1 << 15) +#define CPM_CLKGR_UHC (1 << 14) +#define CPM_CLKGR_IPU (1 << 13) +#define CPM_CLKGR_DMAC (1 << 12) +#define CPM_CLKGR_UDC (1 << 11) +#define CPM_CLKGR_LCD (1 << 10) +#define CPM_CLKGR_CIM (1 << 9) +#define CPM_CLKGR_SADC (1 << 8) +#define CPM_CLKGR_MSC (1 << 7) +#define CPM_CLKGR_AIC1 (1 << 6) +#define CPM_CLKGR_AIC2 (1 << 5) +#define CPM_CLKGR_SSI (1 << 4) +#define CPM_CLKGR_I2C (1 << 3) +#define CPM_CLKGR_RTC (1 << 2) +#define CPM_CLKGR_TCU (1 << 1) +#define CPM_CLKGR_UART0 (1 << 0) + +/* Sleep Control Register */ +#define CPM_SCR_O1ST_BIT 8 +#define CPM_SCR_O1ST_MASK (0xff << CPM_SCR_O1ST_BIT) +#define CPM_SCR_USBPHY_ENABLE (1 << 6) +#define CPM_SCR_OSC_ENABLE (1 << 4) + +/* Hibernate Control Register */ +#define CPM_HCR_PD (1 << 0) + +/* Wakeup Filter Counter Register in Hibernate Mode */ +#define CPM_HWFCR_TIME_BIT 0 +#define CPM_HWFCR_TIME_MASK (0x3ff << CPM_HWFCR_TIME_BIT) + +/* Reset Counter Register in Hibernate Mode */ +#define CPM_HRCR_TIME_BIT 0 +#define CPM_HRCR_TIME_MASK (0x7f << CPM_HRCR_TIME_BIT) + +/* Wakeup Control Register in Hibernate Mode */ +#define CPM_HWCR_WLE_LOW (0 << 2) +#define CPM_HWCR_WLE_HIGH (1 << 2) +#define CPM_HWCR_PIN_WAKEUP (1 << 1) +#define CPM_HWCR_RTC_WAKEUP (1 << 0) + +/* Wakeup Status Register in Hibernate Mode */ +#define CPM_HWSR_WSR_PIN (1 << 1) +#define CPM_HWSR_WSR_RTC (1 << 0) + +/* Reset Status Register */ +#define CPM_RSR_HR (1 << 2) +#define CPM_RSR_WR (1 << 1) +#define CPM_RSR_PR (1 << 0) + +/************************************************************************* + * UART + *************************************************************************/ + +#define IRDA_BASE UART0_BASE +#define UART_BASE UART0_BASE +#define UART_OFF 0x1000 + +/* Register Offset */ +#define OFF_RDR (0x00) /* R 8b H'xx */ +#define OFF_TDR (0x00) /* W 8b H'xx */ +#define OFF_DLLR (0x00) /* RW 8b H'00 */ +#define OFF_DLHR (0x04) /* RW 8b H'00 */ +#define OFF_IER (0x04) /* RW 8b H'00 */ +#define OFF_ISR (0x08) /* R 8b H'01 */ +#define OFF_FCR (0x08) /* W 8b H'00 */ +#define OFF_LCR (0x0C) /* RW 8b H'00 */ +#define OFF_MCR (0x10) /* RW 8b H'00 */ +#define OFF_LSR (0x14) /* R 8b H'00 */ +#define OFF_MSR (0x18) /* R 8b H'00 */ +#define OFF_SPR (0x1C) /* RW 8b H'00 */ +#define OFF_SIRCR (0x20) /* RW 8b H'00, UART0 */ +#define OFF_UMR (0x24) /* RW 8b H'00, UART M Register */ +#define OFF_UACR (0x28) /* RW 8b H'00, UART Add Cycle Register */ + +/* Register Address */ +#define UART0_RDR (UART0_BASE + OFF_RDR) +#define UART0_TDR (UART0_BASE + OFF_TDR) +#define UART0_DLLR (UART0_BASE + OFF_DLLR) +#define UART0_DLHR (UART0_BASE + OFF_DLHR) +#define UART0_IER (UART0_BASE + OFF_IER) +#define UART0_ISR (UART0_BASE + OFF_ISR) +#define UART0_FCR (UART0_BASE + OFF_FCR) +#define UART0_LCR (UART0_BASE + OFF_LCR) +#define UART0_MCR (UART0_BASE + OFF_MCR) +#define UART0_LSR (UART0_BASE + OFF_LSR) +#define UART0_MSR (UART0_BASE + OFF_MSR) +#define UART0_SPR (UART0_BASE + OFF_SPR) +#define UART0_SIRCR (UART0_BASE + OFF_SIRCR) +#define UART0_UMR (UART0_BASE + OFF_UMR) +#define UART0_UACR (UART0_BASE + OFF_UACR) + +/* + * Define macros for UARTIER + * UART Interrupt Enable Register + */ +#define UARTIER_RIE (1 << 0) /* 0: receive fifo full interrupt disable */ +#define UARTIER_TIE (1 << 1) /* 0: transmit fifo empty interrupt disable */ +#define UARTIER_RLIE (1 << 2) /* 0: receive line status interrupt disable */ +#define UARTIER_MIE (1 << 3) /* 0: modem status interrupt disable */ +#define UARTIER_RTIE (1 << 4) /* 0: receive timeout interrupt disable */ + +/* + * Define macros for UARTISR + * UART Interrupt Status Register + */ +#define UARTISR_IP (1 << 0) /* 0: interrupt is pending 1: no interrupt */ +#define UARTISR_IID (7 << 1) /* Source of Interrupt */ +#define UARTISR_IID_MSI (0 << 1) /* Modem status interrupt */ +#define UARTISR_IID_THRI (1 << 1) /* Transmitter holding register empty */ +#define UARTISR_IID_RDI (2 << 1) /* Receiver data interrupt */ +#define UARTISR_IID_RLSI (3 << 1) /* Receiver line status interrupt */ +#define UARTISR_IID_RTO (6 << 1) /* Receive timeout */ +#define UARTISR_FFMS (3 << 6) /* FIFO mode select, set when UARTFCR.FE is set to 1 */ +#define UARTISR_FFMS_NO_FIFO (0 << 6) +#define UARTISR_FFMS_FIFO_MODE (3 << 6) + +/* + * Define macros for UARTFCR + * UART FIFO Control Register + */ +#define UARTFCR_FE (1 << 0) /* 0: non-FIFO mode 1: FIFO mode */ +#define UARTFCR_RFLS (1 << 1) /* write 1 to flush receive FIFO */ +#define UARTFCR_TFLS (1 << 2) /* write 1 to flush transmit FIFO */ +#define UARTFCR_DMS (1 << 3) /* 0: disable DMA mode */ +#define UARTFCR_UUE (1 << 4) /* 0: disable UART */ +#define UARTFCR_RTRG (3 << 6) /* Receive FIFO Data Trigger */ +#define UARTFCR_RTRG_1 (0 << 6) +#define UARTFCR_RTRG_4 (1 << 6) +#define UARTFCR_RTRG_8 (2 << 6) +#define UARTFCR_RTRG_15 (3 << 6) + +/* + * Define macros for UARTLCR + * UART Line Control Register + */ +#define UARTLCR_WLEN (3 << 0) /* word length */ +#define UARTLCR_WLEN_5 (0 << 0) +#define UARTLCR_WLEN_6 (1 << 0) +#define UARTLCR_WLEN_7 (2 << 0) +#define UARTLCR_WLEN_8 (3 << 0) +#define UARTLCR_STOP (1 << 2) /* 0: 1 stop bit when word length is 5,6,7,8 + 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */ +#define UARTLCR_STOP1 (0 << 2) +#define UARTLCR_STOP2 (1 << 2) +#define UARTLCR_PE (1 << 3) /* 0: parity disable */ +#define UARTLCR_PROE (1 << 4) /* 0: even parity 1: odd parity */ +#define UARTLCR_SPAR (1 << 5) /* 0: sticky parity disable */ +#define UARTLCR_SBRK (1 << 6) /* write 0 normal, write 1 send break */ +#define UARTLCR_DLAB (1 << 7) /* 0: access UARTRDR/TDR/IER 1: access UARTDLLR/DLHR */ + +/* + * Define macros for UARTLSR + * UART Line Status Register + */ +#define UARTLSR_DR (1 << 0) /* 0: receive FIFO is empty 1: receive data is ready */ +#define UARTLSR_ORER (1 << 1) /* 0: no overrun error */ +#define UARTLSR_PER (1 << 2) /* 0: no parity error */ +#define UARTLSR_FER (1 << 3) /* 0; no framing error */ +#define UARTLSR_BRK (1 << 4) /* 0: no break detected 1: receive a break signal */ +#define UARTLSR_TDRQ (1 << 5) /* 1: transmit FIFO half "empty" */ +#define UARTLSR_TEMT (1 << 6) /* 1: transmit FIFO and shift registers empty */ +#define UARTLSR_RFER (1 << 7) /* 0: no receive error 1: receive error in FIFO mode */ + +/* + * Define macros for UARTMCR + * UART Modem Control Register + */ +#define UARTMCR_RTS (1 << 1) /* 0: RTS_ output high, 1: RTS_ output low */ +#define UARTMCR_LOOP (1 << 4) /* 0: normal 1: loopback mode */ +#define UARTMCR_MCE (1 << 7) /* 0: modem function is disable */ + +/* + * Define macros for UARTMSR + * UART Modem Status Register + */ +#define UARTMSR_CCTS (1 << 0) /* 1: a change on CTS_ pin */ +#define UARTMSR_CTS (1 << 4) /* 0: CTS_ pin is high */ + +/* + * Define macros for SIRCR + * Slow IrDA Control Register + */ +#define SIRCR_TSIRE (1 << 0) /* 0: transmitter is in UART mode 1: SIR mode */ +#define SIRCR_RSIRE (1 << 1) /* 0: receiver is in UART mode 1: SIR mode */ +#define SIRCR_TPWS (1 << 2) /* 0: transmit 0 pulse width is 3/16 of bit length + 1: 0 pulse width is 1.6us for 115.2Kbps */ +#define SIRCR_TDPL (1 << 3) /* 0: encoder generates a positive pulse for 0 */ +#define SIRCR_RDPL (1 << 4) /* 0: decoder interprets positive pulse as 0 */ + + +/************************************************************************* + * EMC (External Memory Controller) + *************************************************************************/ +#define EMC_SMCR0 (EMC_BASE + 0x10) /* Static Memory Control Register 0 */ +#define EMC_SMCR1 (EMC_BASE + 0x14) /* Static Memory Control Register 1 */ +#define EMC_SMCR2 (EMC_BASE + 0x18) /* Static Memory Control Register 2 */ +#define EMC_SMCR3 (EMC_BASE + 0x1c) /* Static Memory Control Register 3 */ +#define EMC_SMCR4 (EMC_BASE + 0x20) /* Static Memory Control Register 4 */ +#define EMC_SACR0 (EMC_BASE + 0x30) /* Static Memory Bank 0 Addr Config Reg */ +#define EMC_SACR1 (EMC_BASE + 0x34) /* Static Memory Bank 1 Addr Config Reg */ +#define EMC_SACR2 (EMC_BASE + 0x38) /* Static Memory Bank 2 Addr Config Reg */ +#define EMC_SACR3 (EMC_BASE + 0x3c) /* Static Memory Bank 3 Addr Config Reg */ +#define EMC_SACR4 (EMC_BASE + 0x40) /* Static Memory Bank 4 Addr Config Reg */ + +#define EMC_NFCSR (EMC_BASE + 0x050) /* NAND Flash Control/Status Register */ +#define EMC_NFECR (EMC_BASE + 0x100) /* NAND Flash ECC Control Register */ +#define EMC_NFECC (EMC_BASE + 0x104) /* NAND Flash ECC Data Register */ +#define EMC_NFPAR0 (EMC_BASE + 0x108) /* NAND Flash RS Parity 0 Register */ +#define EMC_NFPAR1 (EMC_BASE + 0x10c) /* NAND Flash RS Parity 1 Register */ +#define EMC_NFPAR2 (EMC_BASE + 0x110) /* NAND Flash RS Parity 2 Register */ +#define EMC_NFINTS (EMC_BASE + 0x114) /* NAND Flash Interrupt Status Register */ +#define EMC_NFINTE (EMC_BASE + 0x118) /* NAND Flash Interrupt Enable Register */ +#define EMC_NFERR0 (EMC_BASE + 0x11c) /* NAND Flash RS Error Report 0 Register */ +#define EMC_NFERR1 (EMC_BASE + 0x120) /* NAND Flash RS Error Report 1 Register */ +#define EMC_NFERR2 (EMC_BASE + 0x124) /* NAND Flash RS Error Report 2 Register */ +#define EMC_NFERR3 (EMC_BASE + 0x128) /* NAND Flash RS Error Report 3 Register */ + +#define EMC_DMCR (EMC_BASE + 0x80) /* DRAM Control Register */ +#define EMC_RTCSR (EMC_BASE + 0x84) /* Refresh Time Control/Status Register */ +#define EMC_RTCNT (EMC_BASE + 0x88) /* Refresh Timer Counter */ +#define EMC_RTCOR (EMC_BASE + 0x8c) /* Refresh Time Constant Register */ +#define EMC_DMAR0 (EMC_BASE + 0x90) /* SDRAM Bank 0 Addr Config Register */ +#define EMC_SDMR0 (EMC_BASE + 0xa000) /* Mode Register of SDRAM bank 0 */ + + +#define REG_EMC_SMCR0 REG32(EMC_SMCR0) +#define REG_EMC_SMCR1 REG32(EMC_SMCR1) +#define REG_EMC_SMCR2 REG32(EMC_SMCR2) +#define REG_EMC_SMCR3 REG32(EMC_SMCR3) +#define REG_EMC_SMCR4 REG32(EMC_SMCR4) +#define REG_EMC_SACR0 REG32(EMC_SACR0) +#define REG_EMC_SACR1 REG32(EMC_SACR1) +#define REG_EMC_SACR2 REG32(EMC_SACR2) +#define REG_EMC_SACR3 REG32(EMC_SACR3) +#define REG_EMC_SACR4 REG32(EMC_SACR4) + +#define REG_EMC_NFCSR REG32(EMC_NFCSR) +#define REG_EMC_NFECR REG32(EMC_NFECR) +#define REG_EMC_NFECC REG32(EMC_NFECC) +#define REG_EMC_NFPAR0 REG32(EMC_NFPAR0) +#define REG_EMC_NFPAR1 REG32(EMC_NFPAR1) +#define REG_EMC_NFPAR2 REG32(EMC_NFPAR2) +#define REG_EMC_NFINTS REG32(EMC_NFINTS) +#define REG_EMC_NFINTE REG32(EMC_NFINTE) +#define REG_EMC_NFERR0 REG32(EMC_NFERR0) +#define REG_EMC_NFERR1 REG32(EMC_NFERR1) +#define REG_EMC_NFERR2 REG32(EMC_NFERR2) +#define REG_EMC_NFERR3 REG32(EMC_NFERR3) + +#define REG_EMC_DMCR REG32(EMC_DMCR) +#define REG_EMC_RTCSR REG16(EMC_RTCSR) +#define REG_EMC_RTCNT REG16(EMC_RTCNT) +#define REG_EMC_RTCOR REG16(EMC_RTCOR) +#define REG_EMC_DMAR0 REG32(EMC_DMAR0) + +/* Static Memory Control Register */ +#define EMC_SMCR_STRV_BIT 24 +#define EMC_SMCR_STRV_MASK (0x0f << EMC_SMCR_STRV_BIT) +#define EMC_SMCR_TAW_BIT 20 +#define EMC_SMCR_TAW_MASK (0x0f << EMC_SMCR_TAW_BIT) +#define EMC_SMCR_TBP_BIT 16 +#define EMC_SMCR_TBP_MASK (0x0f << EMC_SMCR_TBP_BIT) +#define EMC_SMCR_TAH_BIT 12 +#define EMC_SMCR_TAH_MASK (0x07 << EMC_SMCR_TAH_BIT) +#define EMC_SMCR_TAS_BIT 8 +#define EMC_SMCR_TAS_MASK (0x07 << EMC_SMCR_TAS_BIT) +#define EMC_SMCR_BW_BIT 6 +#define EMC_SMCR_BW_MASK (0x03 << EMC_SMCR_BW_BIT) + #define EMC_SMCR_BW_8BIT (0 << EMC_SMCR_BW_BIT) + #define EMC_SMCR_BW_16BIT (1 << EMC_SMCR_BW_BIT) + #define EMC_SMCR_BW_32BIT (2 << EMC_SMCR_BW_BIT) +#define EMC_SMCR_BCM (1 << 3) +#define EMC_SMCR_BL_BIT 1 +#define EMC_SMCR_BL_MASK (0x03 << EMC_SMCR_BL_BIT) + #define EMC_SMCR_BL_4 (0 << EMC_SMCR_BL_BIT) + #define EMC_SMCR_BL_8 (1 << EMC_SMCR_BL_BIT) + #define EMC_SMCR_BL_16 (2 << EMC_SMCR_BL_BIT) + #define EMC_SMCR_BL_32 (3 << EMC_SMCR_BL_BIT) +#define EMC_SMCR_SMT (1 << 0) + +/* Static Memory Bank Addr Config Reg */ +#define EMC_SACR_BASE_BIT 8 +#define EMC_SACR_BASE_MASK (0xff << EMC_SACR_BASE_BIT) +#define EMC_SACR_MASK_BIT 0 +#define EMC_SACR_MASK_MASK (0xff << EMC_SACR_MASK_BIT) + +/* NAND Flash Control/Status Register */ +#define EMC_NFCSR_NFCE4 (1 << 7) /* NAND Flash Enable */ +#define EMC_NFCSR_NFE4 (1 << 6) /* NAND Flash FCE# Assertion Enable */ +#define EMC_NFCSR_NFCE3 (1 << 5) +#define EMC_NFCSR_NFE3 (1 << 4) +#define EMC_NFCSR_NFCE2 (1 << 3) +#define EMC_NFCSR_NFE2 (1 << 2) +#define EMC_NFCSR_NFCE1 (1 << 1) +#define EMC_NFCSR_NFE1 (1 << 0) + +/* NAND Flash ECC Control Register */ +#define EMC_NFECR_PRDY (1 << 4) /* Parity Ready */ +#define EMC_NFECR_RS_DECODING (0 << 3) /* RS is in decoding phase */ +#define EMC_NFECR_RS_ENCODING (1 << 3) /* RS is in encoding phase */ +#define EMC_NFECR_HAMMING (0 << 2) /* Select HAMMING Correction Algorithm */ +#define EMC_NFECR_RS (1 << 2) /* Select RS Correction Algorithm */ +#define EMC_NFECR_ERST (1 << 1) /* ECC Reset */ +#define EMC_NFECR_ECCE (1 << 0) /* ECC Enable */ + +/* NAND Flash ECC Data Register */ +#define EMC_NFECC_ECC2_BIT 16 +#define EMC_NFECC_ECC2_MASK (0xff << EMC_NFECC_ECC2_BIT) +#define EMC_NFECC_ECC1_BIT 8 +#define EMC_NFECC_ECC1_MASK (0xff << EMC_NFECC_ECC1_BIT) +#define EMC_NFECC_ECC0_BIT 0 +#define EMC_NFECC_ECC0_MASK (0xff << EMC_NFECC_ECC0_BIT) + +/* NAND Flash Interrupt Status Register */ +#define EMC_NFINTS_ERRCNT_BIT 29 /* Error Count */ +#define EMC_NFINTS_ERRCNT_MASK (0x7 << EMC_NFINTS_ERRCNT_BIT) +#define EMC_NFINTS_PADF (1 << 4) /* Padding Finished */ +#define EMC_NFINTS_DECF (1 << 3) /* Decoding Finished */ +#define EMC_NFINTS_ENCF (1 << 2) /* Encoding Finished */ +#define EMC_NFINTS_UNCOR (1 << 1) /* Uncorrectable Error Occurred */ +#define EMC_NFINTS_ERR (1 << 0) /* Error Occurred */ + +/* NAND Flash Interrupt Enable Register */ +#define EMC_NFINTE_PADFE (1 << 4) /* Padding Finished Interrupt Enable */ +#define EMC_NFINTE_DECFE (1 << 3) /* Decoding Finished Interrupt Enable */ +#define EMC_NFINTE_ENCFE (1 << 2) /* Encoding Finished Interrupt Enable */ +#define EMC_NFINTE_UNCORE (1 << 1) /* Uncorrectable Error Occurred Intr Enable */ +#define EMC_NFINTE_ERRE (1 << 0) /* Error Occurred Interrupt */ + +/* NAND Flash RS Error Report Register */ +#define EMC_NFERR_INDEX_BIT 16 /* Error Symbol Index */ +#define EMC_NFERR_INDEX_MASK (0x1ff << EMC_NFERR_INDEX_BIT) +#define EMC_NFERR_MASK_BIT 0 /* Error Symbol Value */ +#define EMC_NFERR_MASK_MASK (0x1ff << EMC_NFERR_MASK_BIT) + + +/* DRAM Control Register */ +#define EMC_DMCR_BW_BIT 31 +#define EMC_DMCR_BW (1 << EMC_DMCR_BW_BIT) +#define EMC_DMCR_CA_BIT 26 +#define EMC_DMCR_CA_MASK (0x07 << EMC_DMCR_CA_BIT) + #define EMC_DMCR_CA_8 (0 << EMC_DMCR_CA_BIT) + #define EMC_DMCR_CA_9 (1 << EMC_DMCR_CA_BIT) + #define EMC_DMCR_CA_10 (2 << EMC_DMCR_CA_BIT) + #define EMC_DMCR_CA_11 (3 << EMC_DMCR_CA_BIT) + #define EMC_DMCR_CA_12 (4 << EMC_DMCR_CA_BIT) +#define EMC_DMCR_RMODE (1 << 25) +#define EMC_DMCR_RFSH (1 << 24) +#define EMC_DMCR_MRSET (1 << 23) +#define EMC_DMCR_RA_BIT 20 +#define EMC_DMCR_RA_MASK (0x03 << EMC_DMCR_RA_BIT) + #define EMC_DMCR_RA_11 (0 << EMC_DMCR_RA_BIT) + #define EMC_DMCR_RA_12 (1 << EMC_DMCR_RA_BIT) + #define EMC_DMCR_RA_13 (2 << EMC_DMCR_RA_BIT) +#define EMC_DMCR_BA_BIT 19 +#define EMC_DMCR_BA (1 << EMC_DMCR_BA_BIT) +#define EMC_DMCR_PDM (1 << 18) +#define EMC_DMCR_EPIN (1 << 17) +#define EMC_DMCR_TRAS_BIT 13 +#define EMC_DMCR_TRAS_MASK (0x07 << EMC_DMCR_TRAS_BIT) +#define EMC_DMCR_RCD_BIT 11 +#define EMC_DMCR_RCD_MASK (0x03 << EMC_DMCR_RCD_BIT) +#define EMC_DMCR_TPC_BIT 8 +#define EMC_DMCR_TPC_MASK (0x07 << EMC_DMCR_TPC_BIT) +#define EMC_DMCR_TRWL_BIT 5 +#define EMC_DMCR_TRWL_MASK (0x03 << EMC_DMCR_TRWL_BIT) +#define EMC_DMCR_TRC_BIT 2 +#define EMC_DMCR_TRC_MASK (0x07 << EMC_DMCR_TRC_BIT) +#define EMC_DMCR_TCL_BIT 0 +#define EMC_DMCR_TCL_MASK (0x03 << EMC_DMCR_TCL_BIT) + +/* Refresh Time Control/Status Register */ +#define EMC_RTCSR_CMF (1 << 7) +#define EMC_RTCSR_CKS_BIT 0 +#define EMC_RTCSR_CKS_MASK (0x07 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_DISABLE (0 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_4 (1 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_16 (2 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_64 (3 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_256 (4 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_1024 (5 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_2048 (6 << EMC_RTCSR_CKS_BIT) + #define EMC_RTCSR_CKS_4096 (7 << EMC_RTCSR_CKS_BIT) + +/* SDRAM Bank Address Configuration Register */ +#define EMC_DMAR_BASE_BIT 8 +#define EMC_DMAR_BASE_MASK (0xff << EMC_DMAR_BASE_BIT) +#define EMC_DMAR_MASK_BIT 0 +#define EMC_DMAR_MASK_MASK (0xff << EMC_DMAR_MASK_BIT) + +/* Mode Register of SDRAM bank 0 */ +#define EMC_SDMR_BM (1 << 9) /* Write Burst Mode */ +#define EMC_SDMR_OM_BIT 7 /* Operating Mode */ +#define EMC_SDMR_OM_MASK (3 << EMC_SDMR_OM_BIT) + #define EMC_SDMR_OM_NORMAL (0 << EMC_SDMR_OM_BIT) +#define EMC_SDMR_CAS_BIT 4 /* CAS Latency */ +#define EMC_SDMR_CAS_MASK (7 << EMC_SDMR_CAS_BIT) + #define EMC_SDMR_CAS_1 (1 << EMC_SDMR_CAS_BIT) + #define EMC_SDMR_CAS_2 (2 << EMC_SDMR_CAS_BIT) + #define EMC_SDMR_CAS_3 (3 << EMC_SDMR_CAS_BIT) +#define EMC_SDMR_BT_BIT 3 /* Burst Type */ +#define EMC_SDMR_BT_MASK (1 << EMC_SDMR_BT_BIT) + #define EMC_SDMR_BT_SEQ (0 << EMC_SDMR_BT_BIT) /* Sequential */ + #define EMC_SDMR_BT_INT (1 << EMC_SDMR_BT_BIT) /* Interleave */ +#define EMC_SDMR_BL_BIT 0 /* Burst Length */ +#define EMC_SDMR_BL_MASK (7 << EMC_SDMR_BL_BIT) + #define EMC_SDMR_BL_1 (0 << EMC_SDMR_BL_BIT) + #define EMC_SDMR_BL_2 (1 << EMC_SDMR_BL_BIT) + #define EMC_SDMR_BL_4 (2 << EMC_SDMR_BL_BIT) + #define EMC_SDMR_BL_8 (3 << EMC_SDMR_BL_BIT) + +#define EMC_SDMR_CAS2_16BIT \ + (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2) +#define EMC_SDMR_CAS2_32BIT \ + (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4) +#define EMC_SDMR_CAS3_16BIT \ + (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2) +#define EMC_SDMR_CAS3_32BIT \ + (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4) + +/************************************************************************* + * WDT (WatchDog Timer) + *************************************************************************/ +#define WDT_TDR (WDT_BASE + 0x00) +#define WDT_TCER (WDT_BASE + 0x04) +#define WDT_TCNT (WDT_BASE + 0x08) +#define WDT_TCSR (WDT_BASE + 0x0C) + +#define REG_WDT_TDR REG16(WDT_TDR) +#define REG_WDT_TCER REG8(WDT_TCER) +#define REG_WDT_TCNT REG16(WDT_TCNT) +#define REG_WDT_TCSR REG16(WDT_TCSR) + +// Register definition +#define WDT_TCSR_PRESCALE_BIT 3 +#define WDT_TCSR_PRESCALE_MASK (0x7 << WDT_TCSR_PRESCALE_BIT) + #define WDT_TCSR_PRESCALE1 (0x0 << WDT_TCSR_PRESCALE_BIT) + #define WDT_TCSR_PRESCALE4 (0x1 << WDT_TCSR_PRESCALE_BIT) + #define WDT_TCSR_PRESCALE16 (0x2 << WDT_TCSR_PRESCALE_BIT) + #define WDT_TCSR_PRESCALE64 (0x3 << WDT_TCSR_PRESCALE_BIT) + #define WDT_TCSR_PRESCALE256 (0x4 << WDT_TCSR_PRESCALE_BIT) + #define WDT_TCSR_PRESCALE1024 (0x5 << WDT_TCSR_PRESCALE_BIT) +#define WDT_TCSR_EXT_EN (1 << 2) +#define WDT_TCSR_RTC_EN (1 << 1) +#define WDT_TCSR_PCK_EN (1 << 0) + +#define WDT_TCER_TCEN (1 << 0) + +/************************************************************************* + * RTC + *************************************************************************/ +#define RTC_RCR (RTC_BASE + 0x00) /* RTC Control Register */ +#define RTC_RSR (RTC_BASE + 0x04) /* RTC Second Register */ +#define RTC_RSAR (RTC_BASE + 0x08) /* RTC Second Alarm Register */ +#define RTC_RGR (RTC_BASE + 0x0c) /* RTC Regulator Register */ + +#define RTC_HCR (RTC_BASE + 0x20) /* Hibernate Control Register */ +#define RTC_HWFCR (RTC_BASE + 0x24) /* Hibernate Wakeup Filter Counter Reg */ +#define RTC_HRCR (RTC_BASE + 0x28) /* Hibernate Reset Counter Register */ +#define RTC_HWCR (RTC_BASE + 0x2c) /* Hibernate Wakeup Control Register */ +#define RTC_HWRSR (RTC_BASE + 0x30) /* Hibernate Wakeup Status Register */ +#define RTC_HSPR (RTC_BASE + 0x34) /* Hibernate Scratch Pattern Register */ + +#define REG_RTC_RCR REG32(RTC_RCR) +#define REG_RTC_RSR REG32(RTC_RSR) +#define REG_RTC_RSAR REG32(RTC_RSAR) +#define REG_RTC_RGR REG32(RTC_RGR) +#define REG_RTC_HCR REG32(RTC_HCR) +#define REG_RTC_HWFCR REG32(RTC_HWFCR) +#define REG_RTC_HRCR REG32(RTC_HRCR) +#define REG_RTC_HWCR REG32(RTC_HWCR) +#define REG_RTC_HWRSR REG32(RTC_HWRSR) +#define REG_RTC_HSPR REG32(RTC_HSPR) + +/* RTC Control Register */ +#define RTC_RCR_WRDY_BIT 7 +#define RTC_RCR_WRDY (1 << 7) /* Write Ready Flag */ +#define RTC_RCR_1HZ_BIT 6 +#define RTC_RCR_1HZ (1 << RTC_RCR_1HZ_BIT) /* 1Hz Flag */ +#define RTC_RCR_1HZIE (1 << 5) /* 1Hz Interrupt Enable */ +#define RTC_RCR_AF_BIT 4 +#define RTC_RCR_AF (1 << RTC_RCR_AF_BIT) /* Alarm Flag */ +#define RTC_RCR_AIE (1 << 3) /* Alarm Interrupt Enable */ +#define RTC_RCR_AE (1 << 2) /* Alarm Enable */ +#define RTC_RCR_RTCE (1 << 0) /* RTC Enable */ + +/* RTC Regulator Register */ +#define RTC_RGR_LOCK (1 << 31) /* Lock Bit */ +#define RTC_RGR_ADJC_BIT 16 +#define RTC_RGR_ADJC_MASK (0x3ff << RTC_RGR_ADJC_BIT) +#define RTC_RGR_NC1HZ_BIT 0 +#define RTC_RGR_NC1HZ_MASK (0xffff << RTC_RGR_NC1HZ_BIT) + +/* Hibernate Control Register */ +#define RTC_HCR_PD (1 << 0) /* Power Down */ + +/* Hibernate Wakeup Filter Counter Register */ +#define RTC_HWFCR_BIT 5 +#define RTC_HWFCR_MASK (0x7ff << RTC_HWFCR_BIT) + +/* Hibernate Reset Counter Register */ +#define RTC_HRCR_BIT 5 +#define RTC_HRCR_MASK (0x7f << RTC_HRCR_BIT) + +/* Hibernate Wakeup Control Register */ +#define RTC_HWCR_EALM (1 << 0) /* RTC alarm wakeup enable */ + +/* Hibernate Wakeup Status Register */ +#define RTC_HWRSR_HR (1 << 5) /* Hibernate reset */ +#define RTC_HWRSR_PPR (1 << 4) /* PPR reset */ +#define RTC_HWRSR_PIN (1 << 1) /* Wakeup pin status bit */ +#define RTC_HWRSR_ALM (1 << 0) /* RTC alarm status bit */ + +#endif /* __JZ4740_REGS_H__ */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/serial.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/serial.h new file mode 100644 index 0000000000..c4819b9825 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/serial.h @@ -0,0 +1,30 @@ +/* + * linux/include/asm-mips/mach-jz4740/serial.h + * + * Ingenic's JZ4740 common include. + * + * Copyright (C) 2006 - 2007 Ingenic Semiconductor Inc. + * + * Author: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_BOARD_SERIAL_H__ +#define __ASM_BOARD_SERIAL_H__ + +#ifndef CONFIG_SERIAL_MANY_PORTS +#undef RS_TABLE_SIZE +#define RS_TABLE_SIZE 1 +#endif + +#define JZ_BASE_BAUD (12000000/16) + +#define JZ_SERIAL_PORT_DEFNS \ + { .baud_base = JZ_BASE_BAUD, .irq = IRQ_UART0, \ + .flags = STD_COM_FLAGS, .iomem_base = (u8 *)UART0_BASE, \ + .iomem_reg_shift = 2, .io_type = SERIAL_IO_MEM }, + +#endif /* __ASM_BORAD_SERIAL_H__ */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/timer.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/timer.h new file mode 100644 index 0000000000..3214f36115 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/timer.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2010, Lars-Peter Clausen + * JZ4740 platform timer support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __ASM_MACH_JZ4740_TIMER +#define __ASM_MACH_JZ4740_TIMER + +void jz4740_timer_enable_watchdog(void); +void jz4740_timer_disable_watchdog(void); + +#endif diff --git a/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/war.h b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/war.h new file mode 100644 index 0000000000..3a5bc17e28 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/include/asm/mach-jz4740/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle + */ +#ifndef __ASM_MIPS_MACH_JZ4740_WAR_H +#define __ASM_MIPS_MACH_JZ4740_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_JZ4740_WAR_H */ diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Kconfig b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Kconfig new file mode 100644 index 0000000000..015e0560d5 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Kconfig @@ -0,0 +1,35 @@ +choice + prompt "Machine type" + depends on MACH_JZ + default JZ4740_QI_LB60 + +config JZ4740_QI_LB60 + bool "Qi Hardware Ben NanoNote" + select DMA_NONCOHERENT + select SOC_JZ4740 + +config JZ4740_N526 + bool "Hanvon n526 eBook reader" + select DMA_NONCOHERENT + select SOC_JZ4740 + + +endchoice + +config SOC_JZ4740 + bool + select JZSOC + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select SYS_HAS_EARLY_PRINTK + select SYS_SUPPORTS_LITTLE_ENDIAN + select IRQ_CPU + +config JZSOC + bool + select JZRISC + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + +config JZRISC + bool diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Makefile b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Makefile new file mode 100644 index 0000000000..19fc95ce55 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for the Ingenic JZ4740. +# + +# Object file lists. + +obj-y += prom.o irq.o time.o reset.o setup.o dma.o \ + gpio.o clock.o platform.o + +# board specific support + +obj-$(CONFIG_JZ4740_QI_LB60) += board-qi_lb60.o +obj-$(CONFIG_JZ4740_N526) += board-n526.o + +# PM support + +obj-$(CONFIG_PM) +=pm.o + diff --git a/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c new file mode 100644 index 0000000000..fa46278072 --- /dev/null +++ b/target/linux/xburst/files-2.6.32/arch/mips/jz4740/board-n526.c @@ -0,0 +1,346 @@ +/* + * Copyright (C) 2009, Lars-Peter Clausen + * N526 eBook reader support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#include