From b0d08ec3aef3cc4fb105f1d65681907ebef9be0f Mon Sep 17 00:00:00 2001 From: Koen Vandeputte Date: Wed, 14 Nov 2018 12:30:43 +0100 Subject: sunxi: remove kernel 4.9 support This target has been on 4.14 for a long time now. Remove these leftovers as it interferes with kernel bumping. Signed-off-by: Koen Vandeputte --- ...-sunxi-add-support-for-Orange-Pi-R1-board.patch | 196 --------------------- 1 file changed, 196 deletions(-) delete mode 100644 target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch (limited to 'target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch') diff --git a/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch b/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch deleted file mode 100644 index 7e92a565fa..0000000000 --- a/target/linux/sunxi/patches-4.9/200-ARM-dts-sunxi-add-support-for-Orange-Pi-R1-board.patch +++ /dev/null @@ -1,196 +0,0 @@ -From daf75255fb67bf44db178e4c95a803b7972ed670 Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Tue, 26 Sep 2017 22:29:06 +0200 -Subject: ARM: dts: sunxi: add support for Orange Pi R1 board - -Signed-off-by: Hauke Mehrtens ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts | 171 ++++++++++++++++++++++++ - 2 files changed, 172 insertions(+) - create mode 100644 arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -819,6 +819,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a33-sinlinx-sina33.dtb \ - sun8i-a83t-allwinner-h8homlet-v2.dtb \ - sun8i-a83t-cubietruck-plus.dtb \ -+ sun8i-h2-plus-orangepi-r1.dtb \ - sun8i-h3-bananapi-m2-plus.dtb \ - sun8i-h3-nanopi-neo.dtb \ - sun8i-h3-orangepi-2.dtb \ ---- /dev/null -+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-r1.dts -@@ -0,0 +1,171 @@ -+/* -+ * Copyright (C) 2017 Hauke Mehrtens -+ * -+ * Based on sun8i-h2-plus-orangepi-zero.dts, which is: -+ * Copyright (C) 2016 Icenowy Zheng -+ * -+ * Based on sun8i-h3-orangepi-one.dts, which is: -+ * Copyright (C) 2016 Hans de Goede -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "sun8i-h3.dtsi" -+#include "sunxi-common-regulators.dtsi" -+ -+#include -+#include -+#include -+ -+/ { -+ model = "Xunlong Orange Pi R1"; -+ compatible = "xunlong,orangepi-r1", "allwinner,sun8i-h2-plus"; -+ -+ aliases { -+ serial0 = &uart0; -+ /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */ -+ ethernet0 = &emac; -+ ethernet1 = &xr819; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ pwr_led { -+ label = "orangepi:green:pwr"; -+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; -+ default-state = "on"; -+ }; -+ -+ status_led { -+ label = "orangepi:red:status"; -+ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; -+ }; -+ }; -+ -+ reg_vcc_wifi: reg_vcc_wifi { -+ compatible = "regulator-fixed"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-wifi"; -+ enable-active-high; -+ gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; -+ }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; -+ post-power-on-delay-ms = <200>; -+ }; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&emac { -+ phy-handle = <&int_mii_phy>; -+ phy-mode = "mii"; -+ allwinner,leds-active-low; -+ status = "okay"; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>; -+ vmmc-supply = <®_vcc3v3>; -+ bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ -+ cd-inverted; -+ status = "okay"; -+}; -+ -+&mmc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc1_pins_a>; -+ vmmc-supply = <®_vcc_wifi>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ /* -+ * Explicitly define the sdio device, so that we can add an ethernet -+ * alias for it (which e.g. makes u-boot set a mac-address). -+ */ -+ xr819: sdio_wifi@1 { -+ reg = <1>; -+ }; -+}; -+ -+&mmc1_pins_a { -+ bias-pull-up; -+}; -+ -+&ohci1 { -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "disabled"; -+}; -+ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart2_pins>; -+ status = "disabled"; -+}; -+ -+&usbphy { -+ /* USB VBUS is always on */ -+ status = "okay"; -+}; -- cgit v1.2.3