From 278512665094888d3c007fdd74e090496d6c811d Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Fri, 9 Oct 2020 21:53:35 +0200 Subject: kernel: remove support for kernel 4.19 We use 5.4 on all targets by default, and 4.19 has never been released in a stable version. There is no reason to keep it. Signed-off-by: Adrian Schmutzler --- ...-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch | 94 ---------------------- ...allwinner-a64-Enable-A64-timer-workaround.patch | 26 ------ ...01-orangepi_pc2_usb_otg_to_host_key_power.patch | 20 ----- ...dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch | 88 -------------------- ...nner-a64-sopine-Add-Sopine-flash-partitio.patch | 46 ----------- 5 files changed, 274 deletions(-) delete mode 100644 target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch delete mode 100644 target/linux/sunxi/patches-4.19/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch delete mode 100644 target/linux/sunxi/patches-4.19/301-orangepi_pc2_usb_otg_to_host_key_power.patch delete mode 100644 target/linux/sunxi/patches-4.19/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch delete mode 100644 target/linux/sunxi/patches-4.19/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch (limited to 'target/linux/sunxi/patches-4.19') diff --git a/target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch b/target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch deleted file mode 100644 index 74e51c094c..0000000000 --- a/target/linux/sunxi/patches-4.19/010-v5.3-drivers-ata-ahci_sunxi-Increased-SATA-AHCI-DMA-TX-RX.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 120357ea176e420d313cf8cf2ff35fbe233d3bab Mon Sep 17 00:00:00 2001 -From: Uenal Mutlu -Date: Mon, 13 May 2019 16:24:10 +0200 -Subject: [PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs - -Increasing the SATA/AHCI DMA TX/RX FIFOs (P0DMACR.TXTS and .RXTS, ie. -TX_TRANSACTION_SIZE and RX_TRANSACTION_SIZE) from default 0x0 each -to 0x3 each, gives a write performance boost of 120 MiB/s to 132 MiB/s -from lame 36 MiB/s to 45 MiB/s previously. -Read performance is above 200 MiB/s. -[tested on SSD using dd bs=4K/8K/12K/16K/20K/24K/32K: peak-perf at 12K] - -Tested on the SBCs Banana Pi R1 (aka Lamobo R1) and Banana Pi M1 which -are based on the Allwinner A20 32bit-SoC (ARMv7-a / arm-linux-gnueabihf). -These devices are RaspberryPi-like small devices. - -This problem of slow SATA write-speed with these small devices lasts -for about 7 years now (beginning with the A10 SoC). Many commentators -throughout the years wrongly assumed the slow write speed was a -hardware limitation. This patch finally solves the problem, which -in fact was just a hard-to-find software problem due to lack of -SATA/AHCI documentation by the SoC-maker Allwinner Technology. - -Lists of the affected sunxi and other boards and SoCs with SATA using -the ahci_sunxi driver: - $ grep -i -e "^&ahci" arch/arm/boot/dts/sun*dts - and http://linux-sunxi.org/SATA#Devices_with_SATA_ports - See also http://linux-sunxi.org/Category:Devices_with_SATA_port - -Tested-by: Chen-Yu Tsai -Acked-by: Maxime Ripard -Reviewed-by: Hans de Goede -Signed-off-by: Uenal Mutlu -Signed-off-by: Jens Axboe ---- - drivers/ata/ahci_sunxi.c | 47 ++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 45 insertions(+), 2 deletions(-) - ---- a/drivers/ata/ahci_sunxi.c -+++ b/drivers/ata/ahci_sunxi.c -@@ -157,8 +157,51 @@ static void ahci_sunxi_start_engine(stru - void __iomem *port_mmio = ahci_port_base(ap); - struct ahci_host_priv *hpriv = ap->host->private_data; - -- /* Setup DMA before DMA start */ -- sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ff00, 0x00004400); -+ /* Setup DMA before DMA start -+ * -+ * NOTE: A similar SoC with SATA/AHCI by Texas Instruments documents -+ * this Vendor Specific Port (P0DMACR, aka PxDMACR) in its -+ * User's Guide document (TMS320C674x/OMAP-L1x Processor -+ * Serial ATA (SATA) Controller, Literature Number: SPRUGJ8C, -+ * March 2011, Chapter 4.33 Port DMA Control Register (P0DMACR), -+ * p.68, https://www.ti.com/lit/ug/sprugj8c/sprugj8c.pdf) -+ * as equivalent to the following struct: -+ * -+ * struct AHCI_P0DMACR_t -+ * { -+ * unsigned TXTS : 4; -+ * unsigned RXTS : 4; -+ * unsigned TXABL : 4; -+ * unsigned RXABL : 4; -+ * unsigned Reserved : 16; -+ * }; -+ * -+ * TXTS: Transmit Transaction Size (TX_TRANSACTION_SIZE). -+ * This field defines the DMA transaction size in DWORDs for -+ * transmit (system bus read, device write) operation. [...] -+ * -+ * RXTS: Receive Transaction Size (RX_TRANSACTION_SIZE). -+ * This field defines the Port DMA transaction size in DWORDs -+ * for receive (system bus write, device read) operation. [...] -+ * -+ * TXABL: Transmit Burst Limit. -+ * This field allows software to limit the VBUSP master read -+ * burst size. [...] -+ * -+ * RXABL: Receive Burst Limit. -+ * Allows software to limit the VBUSP master write burst -+ * size. [...] -+ * -+ * Reserved: Reserved. -+ * -+ * -+ * NOTE: According to the above document, the following alternative -+ * to the code below could perhaps be a better option -+ * (or preparation) for possible further improvements later: -+ * sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff, -+ * 0x00000033); -+ */ -+ sunxi_clrsetbits(hpriv->mmio + AHCI_P0DMACR, 0x0000ffff, 0x00004433); - - /* Start DMA */ - sunxi_setbits(port_mmio + PORT_CMD, PORT_CMD_START); diff --git a/target/linux/sunxi/patches-4.19/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch b/target/linux/sunxi/patches-4.19/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch deleted file mode 100644 index ef7867af81..0000000000 --- a/target/linux/sunxi/patches-4.19/101-arm64-dts-allwinner-a64-Enable-A64-timer-workaround.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 55ec26d6a4241363fa94f15377ebd8f1116fbfd7 Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sat, 12 Jan 2019 20:17:19 -0600 -Subject: [PATCH] arm64: dts: allwinner: a64: Enable A64 timer workaround - -As instability in the architectural timer has been observed on multiple -devices using this SoC, inluding the Pine64 and the Orange Pi Win, -enable the workaround in the SoC's device tree. - -Acked-by: Maxime Ripard -Signed-off-by: Samuel Holland -Signed-off-by: Chen-Yu Tsai ---- - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -@@ -159,6 +159,7 @@ - - timer { - compatible = "arm,armv8-timer"; -+ allwinner,erratum-unknown1; - interrupts = , - ; -+ linux,code = ; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; -@@ -238,7 +238,7 @@ - }; - - &usb_otg { -- dr_mode = "otg"; -+ dr_mode = "host"; - status = "okay"; - }; - diff --git a/target/linux/sunxi/patches-4.19/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch b/target/linux/sunxi/patches-4.19/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch deleted file mode 100644 index 1d58b7bcba..0000000000 --- a/target/linux/sunxi/patches-4.19/310-Revert-ARM-dts-sun7i-Add-BCM53125-switch-nodes-to-th.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 49cd9ea6dc8d68eb519ccd9f31c9730dec8a181a Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Thu, 8 Mar 2018 22:14:50 +0100 -Subject: [PATCH] Revert "ARM: dts: sun7i: Add BCM53125 switch nodes to the - lamobo-r1 board" - -This reverts the changes needed for the upstream b53 DSA switch driver -to use the OpenWrt b43 swconfig switch driver. - -This reverts commit 0cdefd5b5485ee6eb3512a75739d09a4090176ed. -This reverts commit d7b9eaff5f0ca00726336b4c0c3c29decf30412a. ---- - arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts | 60 ++----------------------------- - 1 file changed, 3 insertions(+), 57 deletions(-) - ---- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts -+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts -@@ -124,67 +124,13 @@ - &gmac { - pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; -+ phy = <&phy1>; - phy-mode = "rgmii"; - phy-supply = <®_gmac_3v3>; - status = "okay"; - -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- -- mdio { -- compatible = "snps,dwmac-mdio"; -- #address-cells = <1>; -- #size-cells = <0>; -- -- switch: ethernet-switch@1e { -- compatible = "brcm,bcm53125"; -- reg = <30>; -- #address-cells = <1>; -- #size-cells = <0>; -- -- ports { -- #address-cells = <1>; -- #size-cells = <0>; -- -- port0: port@0 { -- reg = <0>; -- label = "lan2"; -- }; -- -- port1: port@1 { -- reg = <1>; -- label = "lan3"; -- }; -- -- port2: port@2 { -- reg = <2>; -- label = "lan4"; -- }; -- -- port3: port@3 { -- reg = <3>; -- label = "wan"; -- }; -- -- port4: port@4 { -- reg = <4>; -- label = "lan1"; -- }; -- -- port8: port@8 { -- reg = <8>; -- label = "cpu"; -- ethernet = <&gmac>; -- phy-mode = "rgmii-txid"; -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; -- }; -- }; -+ phy1: ethernet-phy@1 { -+ reg = <1>; - }; - }; - diff --git a/target/linux/sunxi/patches-4.19/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch b/target/linux/sunxi/patches-4.19/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch deleted file mode 100644 index ee70abee27..0000000000 --- a/target/linux/sunxi/patches-4.19/400-arm64-allwinner-a64-sopine-Add-Sopine-flash-partitio.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 7d87d3dafc4b1ea5659eb71ee6c5fd5308490d1f Mon Sep 17 00:00:00 2001 -From: Oskari Lemmela -Date: Mon, 31 Dec 2018 07:44:49 +0200 -Subject: [PATCH] arm64: allwinner: a64-sopine: Add Sopine flash partitions. - -First 896kB to u-boot. Enough space for SPL, u-boot and ATF. -Next 128kB to u-boot environment and rest to firmware. - -Firmware partition is compatible FIT image dynamic splitting. - -Signed-off-by: Oskari Lemmela ---- - .../boot/dts/allwinner/sun50i-a64-sopine.dtsi | 22 +++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine.dtsi -@@ -78,6 +78,28 @@ - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <40000000>; -+ -+ partitions { -+ compatible = "fixed-partitions"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ partition@0 { -+ label = "u-boot"; -+ reg = <0x000000 0x0E0000>; -+ }; -+ -+ partition@e0000 { -+ label = "u-boot-env"; -+ reg = <0x0E0000 0x020000>; -+ }; -+ -+ partition@100000 { -+ compatible = "denx,fit"; -+ label = "firmware"; -+ reg = <0x100000 0xF00000>; -+ }; -+ }; - }; - }; - -- cgit v1.2.3