From 16defbb2bd9478f9e5384b9722f20a694e6bae41 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 14 Mar 2009 15:52:42 +0000 Subject: nuke obsolete kernel stuff SVN-Revision: 14875 --- .../1188-touchscreen-meddling.patch.patch | 505 --------------------- 1 file changed, 505 deletions(-) delete mode 100755 target/linux/s3c24xx/patches-2.6.26/1188-touchscreen-meddling.patch.patch (limited to 'target/linux/s3c24xx/patches-2.6.26/1188-touchscreen-meddling.patch.patch') diff --git a/target/linux/s3c24xx/patches-2.6.26/1188-touchscreen-meddling.patch.patch b/target/linux/s3c24xx/patches-2.6.26/1188-touchscreen-meddling.patch.patch deleted file mode 100755 index a5e2d84b88..0000000000 --- a/target/linux/s3c24xx/patches-2.6.26/1188-touchscreen-meddling.patch.patch +++ /dev/null @@ -1,505 +0,0 @@ -From 76d6ab9228efca87d3e6db46e918c7bbf19f6540 Mon Sep 17 00:00:00 2001 -From: Andy Green -Date: Fri, 25 Jul 2008 23:06:16 +0100 -Subject: [PATCH] touchscreen-meddling.patch - -Touchscreen on GTA01-02 experiences noise on the channel that serves the -"tall axis" of the LCM. The sample quality of the other axis is good. -The bad samples have a characteristic of one shot excursions that can -reach +/- 20% or more of the sample average. - -Previously, we had a simple averaging scheme going in the touchscreen -driver that summed up 32 x and ys and then divided it by 32. This patch -first tidies up the existing code for style, then adds a new "running -average" concept with a FIFO. The running average is separate from the -summing average mentioned above, and is accurate for the last n samples -sample-by-sample, where n is set by 1 << excursion_filter_len_bits in the -machine / platform stuff. - -The heuristic the patch implements for the filtering is to accept all -samples, but tag the *previous* sample with a flag if it differed from -the running average by more than reject_threshold_vs_avg in either -axis. The next sample time, a beauty contest is held if the flag was -set to decide if we think the previous sample was a one-shot excursion -(detected by the new sample being closer to the average than to the -flagged previous sample), or if we believe we are moving (detected by -the new sample being closer to the flagged previous sample than the -average. In the case that we believe the previous sample was an -excursion, we simply overwrite it with the new data and adjust the -summing average to use the new data instead of the excursion data. - -I only tested this by eyeballing the output of ts_print_raw, but it -seemed to be quite a bit better. Gross movement appeared to be -tracked fine too. If folks want to try different heuristics on top -of this patch, be my guest; either way feedback on what it looks like -with a graphical app would be good. - -Signed-off-by: Andy Green ---- - arch/arm/mach-s3c2440/mach-gta02.c | 10 +- - drivers/input/touchscreen/s3c2410_ts.c | 256 ++++++++++++++++++++++++-------- - include/asm-arm/arch-s3c2410/ts.h | 8 +- - 3 files changed, 205 insertions(+), 69 deletions(-) - -diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c -index c32bb2a..afe8039 100644 ---- a/arch/arm/mach-s3c2440/mach-gta02.c -+++ b/arch/arm/mach-s3c2440/mach-gta02.c -@@ -897,10 +897,18 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = { - - static struct s3c2410_ts_mach_info gta02_ts_cfg = { - .delay = 10000, -- .presc = 65, -+ .presc = 50000000 / 1000000, /* 50 MHz PCLK / 1MHz */ -+ /* simple averaging, 2^n samples */ - .oversampling_shift = 5, -+ /* averaging filter length, 2^n */ -+ .excursion_filter_len_bits = 5, -+ /* flagged for beauty contest on next sample if differs from -+ * average more than this -+ */ -+ .reject_threshold_vs_avg = 2, - }; - -+ - /* SPI: LCM control interface attached to Glamo3362 */ - - static void gta02_jbt6k74_reset(int devidx, int level) -diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c -index 1251454..b1ba73d 100644 ---- a/drivers/input/touchscreen/s3c2410_ts.c -+++ b/drivers/input/touchscreen/s3c2410_ts.c -@@ -36,6 +36,9 @@ - * - * 2007-05-23: Harald Welte - * - Add proper support for S32440 -+ * -+ * 2008-06-18: Andy Green -+ * - Outlier removal - */ - - #include -@@ -62,11 +65,16 @@ - #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) - - #define WAIT4INT(x) (((x)<<8) | \ -- S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \ -+ S3C2410_ADCTSC_YM_SEN | \ -+ S3C2410_ADCTSC_YP_SEN | \ -+ S3C2410_ADCTSC_XP_SEN | \ - S3C2410_ADCTSC_XY_PST(3)) - --#define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | S3C2410_ADCTSC_XP_SEN | \ -- S3C2410_ADCTSC_AUTO_PST | S3C2410_ADCTSC_XY_PST(0)) -+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \ -+ S3C2410_ADCTSC_YP_SEN | \ -+ S3C2410_ADCTSC_XP_SEN | \ -+ S3C2410_ADCTSC_AUTO_PST | \ -+ S3C2410_ADCTSC_XY_PST(0)) - - #define DEBUG_LVL KERN_DEBUG - -@@ -85,17 +93,46 @@ static char *s3c2410ts_name = "s3c2410 TouchScreen"; - * Per-touchscreen data. - */ - -+struct s3c2410ts_sample { -+ int x; -+ int y; -+}; -+ - struct s3c2410ts { - struct input_dev *dev; - long xp; - long yp; - int count; - int shift; -+ int extent; /* 1 << shift */ -+ -+ /* the raw sample fifo is a lightweight way to track a running average -+ * of all taken samples. "running average" here means that it gives -+ * correct average for each sample, not only at the end of block of -+ * samples -+ */ -+ int excursion_filter_len; -+ struct s3c2410ts_sample *raw_sample_fifo; -+ int head_raw_fifo; -+ int tail_raw_fifo; -+ struct s3c2410ts_sample raw_running_avg; -+ int reject_threshold_vs_avg; -+ int flag_previous_exceeded_threshold; - }; - - static struct s3c2410ts ts; - static void __iomem *base_addr; - -+static void clear_raw_fifo(void) -+{ -+ ts.head_raw_fifo = 0; -+ ts.tail_raw_fifo = 0; -+ ts.raw_running_avg.x = 0; -+ ts.raw_running_avg.y = 0; -+ ts.flag_previous_exceeded_threshold = 0; -+} -+ -+ - static inline void s3c2410_ts_connect(void) - { - s3c2410_gpio_cfgpin(S3C2410_GPG12, S3C2410_GPG12_XMON); -@@ -110,47 +147,52 @@ static void touch_timer_fire(unsigned long data) - unsigned long data1; - int updown; - -- data0 = readl(base_addr+S3C2410_ADCDAT0); -- data1 = readl(base_addr+S3C2410_ADCDAT1); -+ data0 = readl(base_addr + S3C2410_ADCDAT0); -+ data1 = readl(base_addr + S3C2410_ADCDAT1); - -- updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN)); -+ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && -+ (!(data1 & S3C2410_ADCDAT0_UPDOWN)); - -- if (updown) { -- if (ts.count != 0) { -- ts.xp >>= ts.shift; -- ts.yp >>= ts.shift; -+ if (updown) { -+ if (ts.count != 0) { -+ ts.xp >>= ts.shift; -+ ts.yp >>= ts.shift; - - #ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG -- { -- struct timeval tv; -- do_gettimeofday(&tv); -- printk(DEBUG_LVL "T: %06d, X: %03ld, Y: %03ld\n", (int)tv.tv_usec, ts.xp, ts.yp); -- } -+ { -+ struct timeval tv; -+ -+ do_gettimeofday(&tv); -+ printk(DEBUG_LVL "T:%06d, X:%03ld, Y:%03ld\n", -+ (int)tv.tv_usec, ts.xp, ts.yp); -+ } - #endif - -- input_report_abs(ts.dev, ABS_X, ts.xp); -- input_report_abs(ts.dev, ABS_Y, ts.yp); -+ input_report_abs(ts.dev, ABS_X, ts.xp); -+ input_report_abs(ts.dev, ABS_Y, ts.yp); - -- input_report_key(ts.dev, BTN_TOUCH, 1); -- input_report_abs(ts.dev, ABS_PRESSURE, 1); -- input_sync(ts.dev); -- } -+ input_report_key(ts.dev, BTN_TOUCH, 1); -+ input_report_abs(ts.dev, ABS_PRESSURE, 1); -+ input_sync(ts.dev); -+ } - -- ts.xp = 0; -- ts.yp = 0; -- ts.count = 0; -+ ts.xp = 0; -+ ts.yp = 0; -+ ts.count = 0; - -- writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, base_addr+S3C2410_ADCTSC); -- writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); -- } else { -- ts.count = 0; -+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, -+ base_addr+S3C2410_ADCTSC); -+ writel(readl(base_addr+S3C2410_ADCCON) | -+ S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); -+ } else { -+ ts.count = 0; - -- input_report_key(ts.dev, BTN_TOUCH, 0); -- input_report_abs(ts.dev, ABS_PRESSURE, 0); -- input_sync(ts.dev); -+ input_report_key(ts.dev, BTN_TOUCH, 0); -+ input_report_abs(ts.dev, ABS_PRESSURE, 0); -+ input_sync(ts.dev); - -- writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); -- } -+ writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); -+ } - } - - static struct timer_list touch_timer = -@@ -165,7 +207,8 @@ static irqreturn_t stylus_updown(int irq, void *dev_id) - data0 = readl(base_addr+S3C2410_ADCDAT0); - data1 = readl(base_addr+S3C2410_ADCDAT1); - -- updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && (!(data1 & S3C2410_ADCDAT0_UPDOWN)); -+ updown = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) && -+ (!(data1 & S3C2410_ADCDAT0_UPDOWN)); - - /* TODO we should never get an interrupt with updown set while - * the timer is running, but maybe we ought to verify that the -@@ -180,24 +223,94 @@ static irqreturn_t stylus_updown(int irq, void *dev_id) - - static irqreturn_t stylus_action(int irq, void *dev_id) - { -- unsigned long data0; -- unsigned long data1; -- -- data0 = readl(base_addr+S3C2410_ADCDAT0); -- data1 = readl(base_addr+S3C2410_ADCDAT1); -+ unsigned long x; -+ unsigned long y; -+ int length = (ts.head_raw_fifo - ts.tail_raw_fifo) & (ts.extent - 1); -+ int scaled_avg_x = ts.raw_running_avg.x / length; -+ int scaled_avg_y = ts.raw_running_avg.y / length; -+ -+ x = readl(base_addr + S3C2410_ADCDAT0) & S3C2410_ADCDAT0_XPDATA_MASK; -+ y = readl(base_addr + S3C2410_ADCDAT1) & S3C2410_ADCDAT1_YPDATA_MASK; -+ -+ /* we appear to accept every sample into both the running average FIFO -+ * and the summing average. BUT, if the last sample crossed a -+ * machine-set threshold, each time we do a beauty contest -+ * on the new sample comparing if it is closer to the running -+ * average and the previous sample. If it is closer to the previous -+ * suspicious sample, we assume the change is real and accept both -+ * if the new sample has returned to being closer to the average than -+ * the previous sample, we take the previous sample as an excursion -+ * and overwrite it in both the running average and summing average. -+ */ -+ -+ if (ts.flag_previous_exceeded_threshold) -+ /* new one closer to "nonconformist" previous, or average? -+ * Pythagoras? Who? Don't need it because large excursion -+ * will be accounted for correctly this way -+ */ -+ if ((abs(x - scaled_avg_x) + abs(y - scaled_avg_y)) < -+ (abs(x - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].x) + -+ abs(y - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].y))) { -+ /* it's closer to average, reject previous as a one- -+ * shot excursion, by overwriting it -+ */ -+ ts.xp += x - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].x; -+ ts.yp += y - ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].y; -+ ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].x = x; -+ ts.raw_sample_fifo[(ts.head_raw_fifo - 1) & -+ (ts.extent - 1)].y = y; -+ /* no new sample: replaced previous, so we are done */ -+ goto completed; -+ } -+ /* else it was closer to nonconformist previous: it's likely -+ * a genuine consistent move then. -+ * Keep previous and add new guy. -+ */ -+ -+ if ((x >= scaled_avg_x - ts.reject_threshold_vs_avg) && -+ (x <= scaled_avg_x + ts.reject_threshold_vs_avg) && -+ (y >= scaled_avg_y - ts.reject_threshold_vs_avg) && -+ (y <= scaled_avg_y + ts.reject_threshold_vs_avg)) -+ ts.flag_previous_exceeded_threshold = 0; -+ else -+ ts.flag_previous_exceeded_threshold = 1; - -- ts.xp += data0 & S3C2410_ADCDAT0_XPDATA_MASK; -- ts.yp += data1 & S3C2410_ADCDAT1_YPDATA_MASK; -+ /* accepted */ -+ ts.xp += x; -+ ts.yp += y; - ts.count++; - -- if (ts.count < (1<= (1 << ts.shift)) { -+ mod_timer(&touch_timer, jiffies + 1); - writel(WAIT4INT(1), base_addr+S3C2410_ADCTSC); -+ goto bail; - } - -+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST, -+ base_addr+S3C2410_ADCTSC); -+ writel(readl(base_addr+S3C2410_ADCCON) | -+ S3C2410_ADCCON_ENABLE_START, base_addr+S3C2410_ADCCON); -+ -+bail: - return IRQ_HANDLED; - } - -@@ -213,11 +326,11 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) - struct s3c2410_ts_mach_info *info; - struct input_dev *input_dev; - -- info = ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data; -+ info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data; - - if (!info) - { -- printk(KERN_ERR "Hm... too bad : no platform data for ts\n"); -+ dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n"); - return -EINVAL; - } - -@@ -227,7 +340,7 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) - - adc_clock = clk_get(NULL, "adc"); - if (!adc_clock) { -- printk(KERN_ERR "failed to get adc clock source\n"); -+ dev_err(&pdev->dev, "failed to get adc clock source\n"); - return -ENOENT; - } - clk_enable(adc_clock); -@@ -238,7 +351,7 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) - - base_addr = ioremap(S3C2410_PA_ADC,0x20); - if (base_addr == NULL) { -- printk(KERN_ERR "Failed to remap register block\n"); -+ dev_err(&pdev->dev, "Failed to remap register block\n"); - return -ENOMEM; - } - -@@ -247,25 +360,26 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) - if (!strcmp(pdev->name, "s3c2410-ts")) - s3c2410_ts_connect(); - -- if ((info->presc&0xff) > 0) -- writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\ -- base_addr+S3C2410_ADCCON); -+ if ((info->presc & 0xff) > 0) -+ writel(S3C2410_ADCCON_PRSCEN | -+ S3C2410_ADCCON_PRSCVL(info->presc&0xFF), -+ base_addr + S3C2410_ADCCON); - else -- writel(0,base_addr+S3C2410_ADCCON); -+ writel(0, base_addr+S3C2410_ADCCON); - - - /* Initialise registers */ -- if ((info->delay&0xffff) > 0) -- writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); -+ if ((info->delay & 0xffff) > 0) -+ writel(info->delay & 0xffff, base_addr + S3C2410_ADCDLY); - -- writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); -+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC); - - /* Initialise input stuff */ - memset(&ts, 0, sizeof(struct s3c2410ts)); - input_dev = input_allocate_device(); - - if (!input_dev) { -- printk(KERN_ERR "Unable to allocate the input device !!\n"); -+ dev_err(&pdev->dev, "Unable to allocate the input device\n"); - return -ENOMEM; - } - -@@ -284,23 +398,30 @@ static int __init s3c2410ts_probe(struct platform_device *pdev) - ts.dev->id.version = S3C2410TSVERSION; - - ts.shift = info->oversampling_shift; -+ ts.extent = 1 << info->oversampling_shift; -+ ts.reject_threshold_vs_avg = info->reject_threshold_vs_avg; -+ ts.excursion_filter_len = 1 << info->excursion_filter_len_bits; -+ -+ ts.raw_sample_fifo = kmalloc(sizeof(struct s3c2410ts_sample) * -+ ts.excursion_filter_len, GFP_KERNEL); -+ clear_raw_fifo(); - - /* Get irqs */ - if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM, -- "s3c2410_action", ts.dev)) { -- printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_ADC !\n"); -+ "s3c2410_action", ts.dev)) { -+ dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n"); - iounmap(base_addr); - return -EIO; - } - if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM, - "s3c2410_action", ts.dev)) { -- printk(KERN_ERR "s3c2410_ts.c: Could not allocate ts IRQ_TC !\n"); -+ dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n"); - free_irq(IRQ_ADC, ts.dev); - iounmap(base_addr); - return -EIO; - } - -- printk(KERN_INFO "%s successfully loaded\n", s3c2410ts_name); -+ dev_info(&pdev->dev, "successfully loaded\n"); - - /* All went ok, so register to the input system */ - rc = input_register_device(ts.dev); -@@ -328,6 +449,8 @@ static int s3c2410ts_remove(struct platform_device *pdev) - adc_clock = NULL; - } - -+ kfree(ts.raw_sample_fifo); -+ - input_unregister_device(ts.dev); - iounmap(base_addr); - -@@ -357,17 +480,20 @@ static int s3c2410ts_resume(struct platform_device *pdev) - clk_enable(adc_clock); - mdelay(1); - -+ clear_raw_fifo(); -+ - enable_irq(IRQ_ADC); - enable_irq(IRQ_TC); - - if ((info->presc&0xff) > 0) -- writel(S3C2410_ADCCON_PRSCEN | S3C2410_ADCCON_PRSCVL(info->presc&0xFF),\ -- base_addr+S3C2410_ADCCON); -+ writel(S3C2410_ADCCON_PRSCEN | -+ S3C2410_ADCCON_PRSCVL(info->presc&0xFF), -+ base_addr+S3C2410_ADCCON); - else - writel(0,base_addr+S3C2410_ADCCON); - - /* Initialise registers */ -- if ((info->delay&0xffff) > 0) -+ if ((info->delay & 0xffff) > 0) - writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY); - - writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC); -diff --git a/include/asm-arm/arch-s3c2410/ts.h b/include/asm-arm/arch-s3c2410/ts.h -index 593632a..44c1e4b 100644 ---- a/include/asm-arm/arch-s3c2410/ts.h -+++ b/include/asm-arm/arch-s3c2410/ts.h -@@ -17,9 +17,11 @@ - #define __ASM_ARM_TS_H - - struct s3c2410_ts_mach_info { -- int delay; -- int presc; -- int oversampling_shift; -+ int delay; -+ int presc; -+ int oversampling_shift; -+ int excursion_filter_len_bits; -+ int reject_threshold_vs_avg; - }; - - void set_s3c2410ts_info(struct s3c2410_ts_mach_info *hard_s3c2410ts_info); --- -1.5.6.3 - -- cgit v1.2.3