From 1c020f8b439bf6439cb878e2888ed3dd1562b92e Mon Sep 17 00:00:00 2001
From: INAGAKI Hiroshi <musashino.open@gmail.com>
Date: Wed, 11 Aug 2021 20:27:38 +0900
Subject: realtek: cleanup and update soc dtsi in 5.10

the following changes are included in this patch:

- node is enabled by default, drop 'status = "okay"'
- adjust order of "compatible" lines and "reg" lines
- add a new blank line before fixed-link node in rtl830x.dtsi

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
---
 target/linux/realtek/dts-5.10/rtl838x.dtsi | 21 ++++++---------------
 target/linux/realtek/dts-5.10/rtl930x.dtsi | 18 +++++-------------
 2 files changed, 11 insertions(+), 28 deletions(-)

(limited to 'target/linux/realtek/dts-5.10')

diff --git a/target/linux/realtek/dts-5.10/rtl838x.dtsi b/target/linux/realtek/dts-5.10/rtl838x.dtsi
index b59b141f66..315d34ac0c 100644
--- a/target/linux/realtek/dts-5.10/rtl838x.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl838x.dtsi
@@ -69,23 +69,21 @@
 	};
 
 	cpuintc: cpuintc {
+		compatible = "mti,cpu-interrupt-controller";
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
 	};
 
 	intc: rtlintc {
+		compatible = "realtek,rt8380-intc";
+		reg = <0xb8003000 0x20>;
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
-		compatible = "realtek,rt8380-intc";
-		reg = <0xb8003000 0x20>;
 	};
 
 	spi0: spi@b8001200 {
-		status = "okay";
-
 		compatible = "realtek,rtl838x-nor";
 		reg = <0xb8001200 0x100>;
 
@@ -94,8 +92,6 @@
 	};
 
 	uart0: uart@b8002000 {
-		status = "okay";
-
 		compatible = "ns16550a";
 		reg = <0xb8002000 0x100>;
 
@@ -114,8 +110,6 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&enable_uart1>;
 
-		status = "okay";
-
 		compatible = "ns16550a";
 		reg = <0xb8002100 0x100>;
 
@@ -140,11 +134,12 @@
 	};
 
 	gpio1: rtl8231-gpio {
-		status = "disabled";
 		compatible = "realtek,rtl8231-gpio";
 		#gpio-cells = <2>;
 		indirect-access-bus-id = <0>;
 		gpio-controller;
+
+		status = "disabled";
 	};
 
 	pinmux: pinmux@bb001000 {
@@ -162,8 +157,6 @@
 	};
 
 	ethernet0: ethernet@bb00a300 {
-		status = "okay";
-
 		compatible = "realtek,rtl838x-eth";
 		reg = <0xbb00a300 0x100>;
 		interrupt-parent = <&intc>;
@@ -178,11 +171,9 @@
 	};
 
 	switch0: switch@bb000000 {
-		status = "okay";
+		compatible = "realtek,rtl83xx-switch";
 
 		interrupt-parent = <&intc>;
 		interrupts = <20>;
-
-		compatible = "realtek,rtl83xx-switch";
 	};
 };
diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi
index 5d13fc31b3..ea89fd2584 100644
--- a/target/linux/realtek/dts-5.10/rtl930x.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi
@@ -74,18 +74,18 @@
 	};
 
 	cpuintc: cpuintc {
+		compatible = "mti,cpu-interrupt-controller";
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
-		compatible = "mti,cpu-interrupt-controller";
 	};
 
 	intc: rtlintc {
+		compatible = "realtek,rt9300-intc";
+		reg = <0xb8003000 0x20>;
 		#address-cells = <0>;
 		#interrupt-cells = <1>;
 		interrupt-controller;
-		compatible = "realtek,rt9300-intc";
-		reg = <0xb8003000 0x20>;
 	};
 
 	osc: oscillator {
@@ -105,8 +105,6 @@
 	};
 
 	spi0: spi@b8001200 {
-		status = "okay";
-
 		compatible = "realtek,rtl838x-nor";
 		reg = <0xb8001200 0x100>;
 
@@ -127,8 +125,6 @@
 		reg-shift = <2>;
 		fifo-size = <1>;
 		no-loopback-test;
-
-		status = "okay";
 	};
 
 	uart1: uart@b8002100 {
@@ -144,8 +140,6 @@
 		reg-shift = <2>;
 		fifo-size = <1>;
 		no-loopback-test;
-
-		status = "okay";
 	};
 
 	gpio0: gpio-controller@b8003500 {
@@ -158,13 +152,13 @@
 	};
 
 	ethernet0: ethernet@bb00a300 {
-		status = "okay";
 		compatible = "realtek,rtl838x-eth";
 		reg = <0xbb00a300 0x100>;
 		interrupt-parent = <&intc>;
 		interrupts = <24>;
 		#interrupt-cells = <1>;
 		phy-mode = "internal";
+
 		fixed-link {
 			speed = <1000>;
 			full-duplex;
@@ -172,11 +166,9 @@
 	};
 
 	switch0: switch@bb000000 {
-		status = "okay";
+		compatible = "realtek,rtl83xx-switch";
 
 		interrupt-parent = <&intc>;
 		interrupts = <20>;
-
-		compatible = "realtek,rtl83xx-switch";
 	};
 };
-- 
cgit v1.2.3