From d637494a614baffa25db98c210ffcae77081f65c Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 2 Oct 2015 10:49:45 +0000 Subject: ramips: make pinctrl work on newer socs newer socs have 2 mux registers Signed-off-by: John Crispin Backport of r46952 git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@47088 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- .../0030-pinctrl-ralink-add-pinctrl-driver.patch | 47 +++++++++++++--------- 1 file changed, 27 insertions(+), 20 deletions(-) (limited to 'target/linux/ramips') diff --git a/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch index fcc66ff007..c50384cfcc 100644 --- a/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch +++ b/target/linux/ramips/patches-3.18/0030-pinctrl-ralink-add-pinctrl-driver.patch @@ -24,7 +24,7 @@ Signed-off-by: John Crispin --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -453,6 +453,8 @@ config RALINK +@@ -453,6 +453,8 @@ select CLKDEV_LOOKUP select ARCH_HAS_RESET_CONTROLLER select RESET_CONTROLLER @@ -35,7 +35,7 @@ Signed-off-by: John Crispin bool "SGI IP22 (Indy/Indigo2)" --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h -@@ -90,7 +90,6 @@ enum mt762x_soc_type { +@@ -90,7 +90,6 @@ #define MT7620_DDR2_SIZE_MIN 32 #define MT7620_DDR2_SIZE_MAX 256 @@ -43,7 +43,7 @@ Signed-off-by: John Crispin #define MT7620_GPIO_MODE_UART0_SHIFT 2 #define MT7620_GPIO_MODE_UART0_MASK 0x7 #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT) -@@ -102,16 +101,36 @@ enum mt762x_soc_type { +@@ -102,16 +101,36 @@ #define MT7620_GPIO_MODE_GPIO_UARTF 0x5 #define MT7620_GPIO_MODE_GPIO_I2S 0x6 #define MT7620_GPIO_MODE_GPIO 0x7 @@ -148,7 +148,7 @@ Signed-off-by: John Crispin +#endif --- a/arch/mips/include/asm/mach-ralink/rt305x.h +++ b/arch/mips/include/asm/mach-ralink/rt305x.h -@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void) +@@ -125,24 +125,29 @@ #define RT305X_GPIO_GE0_TXD0 40 #define RT305X_GPIO_GE0_RXCLK 51 @@ -263,7 +263,7 @@ Signed-off-by: John Crispin #include "common.h" -@@ -47,118 +48,58 @@ enum mt762x_soc_type mt762x_soc; +@@ -47,118 +48,58 @@ /* does the board have sdram or ddram */ static int dram_type; @@ -498,7 +498,7 @@ Signed-off-by: John Crispin }; static void rt288x_wdt_reset(void) -@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void) +@@ -69,11 +50,6 @@ rt_sysc_w32(t, SYSC_REG_CLKCFG); } @@ -510,7 +510,7 @@ Signed-off-by: John Crispin void __init ralink_clk_init(void) { unsigned long cpu_rate, wmac_rate = 40000000; -@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_inf +@@ -141,4 +117,6 @@ soc_info->mem_base = RT2880_SDRAM_BASE; soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; @@ -673,7 +673,7 @@ Signed-off-by: John Crispin }; static void rt305x_wdt_reset(void) -@@ -114,14 +100,6 @@ static void rt305x_wdt_reset(void) +@@ -114,14 +100,6 @@ rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); } @@ -688,7 +688,7 @@ Signed-off-by: John Crispin static unsigned long rt5350_get_mem_size(void) { void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); -@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_inf +@@ -290,11 +268,14 @@ soc_info->mem_base = RT305X_SDRAM_BASE; if (soc_is_rt5350()) { soc_info->mem_size = rt5350_get_mem_size(); @@ -876,7 +876,7 @@ Signed-off-by: John Crispin }; static void rt3883_wdt_reset(void) -@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void) +@@ -155,17 +73,6 @@ rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1); } @@ -894,7 +894,7 @@ Signed-off-by: John Crispin void __init ralink_clk_init(void) { unsigned long cpu_rate, sys_rate; -@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_inf +@@ -244,4 +151,6 @@ soc_info->mem_base = RT3883_SDRAM_BASE; soc_info->mem_size_min = RT3883_MEM_SIZE_MIN; soc_info->mem_size_max = RT3883_MEM_SIZE_MAX; @@ -903,7 +903,7 @@ Signed-off-by: John Crispin } --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig -@@ -103,6 +103,11 @@ config PINCTRL_LANTIQ +@@ -103,6 +103,11 @@ select PINMUX select PINCONF @@ -917,7 +917,7 @@ Signed-off-by: John Crispin depends on SOC_FALCON --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_BCM281XX) += pinctr +@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_FALCON) += pinctrl-falcon.o obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o @@ -927,7 +927,7 @@ Signed-off-by: John Crispin obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o --- /dev/null +++ b/drivers/pinctrl/pinctrl-rt2880.c -@@ -0,0 +1,467 @@ +@@ -0,0 +1,474 @@ +/* + * linux/drivers/pinctrl/pinctrl-rt2880.c + * @@ -957,6 +957,7 @@ Signed-off-by: John Crispin +#include "core.h" + +#define SYSC_REG_GPIO_MODE 0x60 ++#define SYSC_REG_GPIO_MODE2 0x64 + +struct rt2880_priv { + struct device *dev; @@ -1134,7 +1135,9 @@ Signed-off-by: John Crispin +{ + struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); + u32 mode = 0; ++ u32 reg = SYSC_REG_GPIO_MODE; + int i; ++ int shift; + + /* dont allow double use */ + if (p->groups[group].enabled) { @@ -1145,8 +1148,13 @@ Signed-off-by: John Crispin + p->groups[group].enabled = 1; + p->func[func]->enabled = 1; + -+ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE); -+ mode &= ~(p->groups[group].mask << p->groups[group].shift); ++ shift = p->groups[group].shift; ++ if (shift >= 32) { ++ shift -= 32; ++ reg = SYSC_REG_GPIO_MODE2; ++ } ++ mode = rt_sysc_r32(reg); ++ mode &= ~(p->groups[group].mask << shift); + + /* mark the pins as gpio */ + for (i = 0; i < p->groups[group].func[0].pin_count; i++) @@ -1154,14 +1162,13 @@ Signed-off-by: John Crispin + + /* function 0 is gpio and needs special handling */ + if (func == 0) { -+ mode |= p->groups[group].gpio << p->groups[group].shift; ++ mode |= p->groups[group].gpio << shift; + } else { + for (i = 0; i < p->func[func]->pin_count; i++) + p->gpio[p->func[func]->pins[i]] = 0; -+ mode |= p->func[func]->value << p->groups[group].shift; ++ mode |= p->func[func]->value << shift; + } -+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); -+ ++ rt_sysc_w32(mode, reg); + + return 0; +} -- cgit v1.2.3