From 2b2d274bfa2fc7138423acbf2dbb53d665b1bf18 Mon Sep 17 00:00:00 2001
From: John Crispin <john@openwrt.org>
Date: Tue, 22 Apr 2014 08:08:31 +0000
Subject: ramips: Add Airlink101 AR725W board support

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 40549
---
 target/linux/ramips/dts/AR725W.dts     | 113 +++++++++++++++++++++++++++++++++
 target/linux/ramips/image/Makefile     |   3 +
 target/linux/ramips/rt288x/config-3.10 |   1 +
 3 files changed, 117 insertions(+)
 create mode 100644 target/linux/ramips/dts/AR725W.dts

(limited to 'target/linux/ramips')

diff --git a/target/linux/ramips/dts/AR725W.dts b/target/linux/ramips/dts/AR725W.dts
new file mode 100644
index 0000000000..87f2553423
--- /dev/null
+++ b/target/linux/ramips/dts/AR725W.dts
@@ -0,0 +1,113 @@
+/dts-v1/;
+
+/include/ "rt2880.dtsi"
+
+/ {
+	compatible = "AR725W", "ralink,rt2880-soc";
+	model = "Airlink101 AR725W";
+
+	palmbus@300000 {
+		gpio0: gpio@600 {
+			status = "okay";
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "spi", "uartlite";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@400000 {
+		status = "okay";
+		mtd-mac-address = <&factory 0x4>;
+
+		port@0 {
+			phy-handle = <&phy0>;
+			phy-mode = "mii";
+		};
+
+		mdio-bus {
+			status = "okay";
+			phy0: ethernet-phy@0 {
+				phy-mode = "mii";
+				reg = <0>;
+			};
+		};
+	};
+
+	wmac@480000 {
+		status = "okay";
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+
+	cfi@bdc00000 {
+		compatible = "cfi-flash";
+		reg = <0xbc400000 0x800000>;
+
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u-boot@0 {
+			reg = <0x0 0x30000>;
+			label = "u-boot";
+			read-only;
+		};
+
+		u-boot-env@30000 {
+			reg = <0x30000 0x10000>;
+			label = "u-boot-env";
+		};
+
+		factory: factory@40000 {
+			reg = <0x40000 0x10000>;
+			label = "factory";
+			read-only;
+		};
+
+		firmware@50000 {
+			reg = <0x50000 0x3B0000>;
+			label = "firmware";
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		status {
+			label = "ar725w:green:power";
+			gpios = <&gpio0 7 0>;
+		};
+
+		wpsred {
+			label = "ar725w:red:wps";
+			gpios = <&gpio0 8 1>;
+		};
+
+		wpsblue {
+			label = "ar725w:blue:wps";
+			gpios = <&gpio0 13 1>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <100>;
+		wps {
+			label = "wps";
+			gpios = <&gpio0 0 1>;
+			linux,code = <0x211>;
+		};
+		reset {
+			label = "reset";
+			gpios = <&gpio0 9 1>;
+			linux,code = <0x198>;
+		};
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 63f7425a9e..bf9ccc198a 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -261,6 +261,8 @@ BuildFirmware/PorayDualSize/initramfs=$(call BuildFirmware/DefaultDualSize/initr
 # RT288X Profiles
 #
 
+Image/Build/Profile/AR725W=$(call BuildFirmware/Default4M/$(1),$(1),ar725w,AR725W)
+
 # 0x790000
 belkin_f5d8235v1_mtd_size=7929856
 Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size))
@@ -273,6 +275,7 @@ Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx
 
 ifeq ($(SUBTARGET),rt288x)
 define Image/Build/Profile/Default
+	$(call Image/Build/Profile/AR725W,$(1))
 	$(call Image/Build/Profile/F5D8235V1,$(1))
 	$(call Image/Build/Profile/RTN15,$(1))
 	$(call Image/Build/Profile/V11STFE,$(1))
diff --git a/target/linux/ramips/rt288x/config-3.10 b/target/linux/ramips/rt288x/config-3.10
index f1ae652ec6..6fd3971beb 100644
--- a/target/linux/ramips/rt288x/config-3.10
+++ b/target/linux/ramips/rt288x/config-3.10
@@ -79,6 +79,7 @@ CONFIG_HW_RANDOM=m
 CONFIG_HZ_PERIODIC=y
 CONFIG_IMAGE_CMDLINE_HACK=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
 CONFIG_IRQCHIP=y
 CONFIG_IRQ_CPU=y
 CONFIG_IRQ_DOMAIN=y
-- 
cgit v1.2.3