From aabdf6991cce55a76540c91ff3b5177afd8dce99 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Wed, 13 Nov 2019 23:29:21 +0900 Subject: ramips: improve Samsung CY-SWR1100 support This patch does the following: - rename "devdata" flash partition and make it read-only - switch from gpio-keys-polled to gpio-keys - add missing power LED - set correct PCI ID to compatible string in wifi node - remove ralink,5ghz property in wifi node - provide label MAC address Rename devdata partition to devconf as indicated in the stock firmware partition table: 00030000-00040000: "devdata" 00040000-00050000: "devconf" Power LED can be controlled by SoC GPIO. Add it in the dts leds node. RT3092L supports only bgn mode, so it is unnecessary to disable 5GHz band. Signed-off-by: Sungbo Eo --- target/linux/ramips/rt3883/base-files/etc/board.d/02_network | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ramips/rt3883') diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/02_network b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network index 2ef0e319bb..873c72cea3 100755 --- a/target/linux/ramips/rt3883/base-files/etc/board.d/02_network +++ b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network @@ -72,6 +72,7 @@ ramips_setup_macs() samsung,cy-swr1100) lan_mac=$(mtd_get_mac_ascii nvram lanmac) wan_mac=$(mtd_get_mac_ascii nvram wanmac) + label_mac=$wan_mac ;; sitecom,wlr-6000) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2) -- cgit v1.2.3