From 19724e28c81e3ff642f09c49f612cd147c54a697 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Tue, 22 Oct 2019 12:37:13 +0200 Subject: ramips: split base-files into subtargets While most of the target's contents are split into subtargets, the base-files are maintained for the target as a whole. However, OpenWrt already implements a mechanism that will use (and even prefer) files in the subtargets' directories. This can be exploited to make several scripts subtarget-specific and thus save some space. In certain cases, keeping files in parent (=target) base-files was more convenient, and thus no splitting was performed for those. Note that this will increase overall code lines, but reduce code per subtarget. base-files ipk size reduction: master (mt7621) 60958 B split (mt7620) 46358 B (- 14.3 kiB) split (mt7621) 48759 B (- 11.9 kiB) split (mt76x8) 44948 B (- 15.6 kiB) split (rt288x) 43508 B (- 17.0 kiB) split (rt305x) 45616 B (- 15.0 kiB) split (rt3883) 44176 B (- 16.4 kiB) Run-tested on: GL.iNet GL-MT300N-V2 (mt76x8) D-Link DWR-116 (mt7620) Signed-off-by: Adrian Schmutzler --- .../ramips/rt3883/base-files/etc/board.d/01_leds | 35 ++++++++ .../rt3883/base-files/etc/board.d/02_network | 100 +++++++++++++++++++++ .../base-files/lib/preinit/04_handle_checksumming | 32 +++++++ .../rt3883/base-files/lib/upgrade/platform.sh | 20 +++++ 4 files changed, 187 insertions(+) create mode 100755 target/linux/ramips/rt3883/base-files/etc/board.d/01_leds create mode 100755 target/linux/ramips/rt3883/base-files/etc/board.d/02_network create mode 100644 target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming create mode 100755 target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh (limited to 'target/linux/ramips/rt3883/base-files') diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds new file mode 100755 index 0000000000..8502c8f417 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/etc/board.d/01_leds @@ -0,0 +1,35 @@ +#!/bin/sh + +. /lib/functions/leds.sh +. /lib/functions/uci-defaults.sh + +set_wifi_led() { + ucidef_set_led_netdev "wifi_led" "wifi" "${1}" "${2:-wlan0}" +} + + +board=$(board_name) +boardname="${board##*,}" + +board_config_update + +led_wlan="$(get_dt_led wlan)" +[ -n "$led_wlan" ] && ucidef_set_led_wlan "wifi_led" "wifi" "$led_wlan" "phy0tpt" + +case $board in +belkin,f9k1109v1) + set_usb_led "$boardname:green:usb1" + ucidef_set_led_netdev "lan" "lan" "$boardname:blue:wps" "eth0" + ;; +edimax,br-6475nd) + set_wifi_led "$boardname:amber:wlan" + ;; +omnima,hpm) + ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0" + set_wifi_led "$boardname:green:wifi" + ;; +esac + +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt3883/base-files/etc/board.d/02_network b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network new file mode 100755 index 0000000000..519d46aae6 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/etc/board.d/02_network @@ -0,0 +1,100 @@ +#!/bin/sh + +. /lib/functions.sh +. /lib/functions/uci-defaults.sh +. /lib/functions/system.sh + +ramips_setup_interfaces() +{ + local board="$1" + + case $board in + asus,rt-n56u) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0" + ;; + belkin,f9k1109v1) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0" + ;; + dlink,dir-645) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0" + ;; + edimax,br-6475nd) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0" + ;; + loewe,wmdr-143n|\ + omnima,hpm) + ucidef_set_interface_lan "eth0" + ;; + samsung,cy-swr1100) + ucidef_add_switch "switch0" \ + "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "9@eth0" + ;; + sitecom,wlr-6000|\ + trendnet,tew-691gr|\ + trendnet,tew-692gr) + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0" + ;; + *) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ;; + esac +} + +ramips_setup_macs() +{ + local board="$1" + local lan_mac="" + local wan_mac="" + local label_mac="" + + case $board in + asus,rt-n56u) + lan_mac=$(macaddr_setbit_la "$(cat /sys/class/net/eth0/address)") + wan_mac=$(mtd_get_mac_binary factory 0x8004) + ;; + belkin,f9k1109v1) + wan_mac=$(mtd_get_mac_ascii uboot-env HW_WAN_MAC) + lan_mac=$(mtd_get_mac_ascii uboot-env HW_LAN_MAC) + label_mac=$wan_mac + ;; + dlink,dir-645) + lan_mac=$(mtd_get_mac_ascii nvram lanmac) + wan_mac=$(mtd_get_mac_ascii nvram wanmac) + ;; + edimax,br-6475nd) + wan_mac=$(mtd_get_mac_binary devdata 0x7) + ;; + samsung,cy-swr1100) + lan_mac=$(mtd_get_mac_ascii factory lanmac) + ;; + sitecom,wlr-6000) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x8004)" 2) + ;; + trendnet,tew-691gr) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 3) + ;; + trendnet,tew-692gr) + wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) + ;; + *) + wan_mac=$(macaddr_add "$(cat /sys/class/net/eth0/address)" 1) + ;; + esac + + [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac + [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac + [ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac +} + +board_config_update +board=$(board_name) +ramips_setup_interfaces $board +ramips_setup_macs $board +board_config_flush + +exit 0 diff --git a/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming b/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming new file mode 100644 index 0000000000..e2aef5f1f2 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/lib/preinit/04_handle_checksumming @@ -0,0 +1,32 @@ +#!/bin/sh + +# Netgear WNCE2001 has does a checksum check on boot and goes into recovery +# tftp mode when the check fails. Initializing the JFFS2 partition triggers +# this, so we make sure to zero checksum and size to be checksummed before +# that happens, so this needs to run very early during boot. + +do_checksumming_disable() { + . /lib/functions.sh + + local board=$(board_name) + + case "$board" in + asus,rt-n56u) + echo "Board is ASUS RT-N56U, replacing uImage header..." + local firmware_mtd=$(find_mtd_part firmware) + local rootfs_mtd=$(find_mtd_part rootfs) + local rootfs_data_mtd=$(find_mtd_part rootfs_data) + local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}') + local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}') + local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}') + local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"') + if [ "$signature" = "27051956" ]; then + dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null + fi + ;; + esac + + return 0 +} + +boot_hook_add preinit_main do_checksumming_disable diff --git a/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh b/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh new file mode 100755 index 0000000000..786d57fc70 --- /dev/null +++ b/target/linux/ramips/rt3883/base-files/lib/upgrade/platform.sh @@ -0,0 +1,20 @@ +# +# Copyright (C) 2010 OpenWrt.org +# + +PART_NAME=firmware +REQUIRE_IMAGE_METADATA=1 + +platform_check_image() { + return 0 +} + +platform_do_upgrade() { + local board=$(board_name) + + case "$board" in + *) + default_do_upgrade "$1" + ;; + esac +} -- cgit v1.2.3