From c7727833945deb70eed7520ab44fa08b0870b8a7 Mon Sep 17 00:00:00 2001 From: Rui Salvaterra Date: Tue, 14 Dec 2021 13:46:19 +0000 Subject: ramips: remove Linux 5.4 support We're at 5.10 stable, this can finally go. Signed-off-by: Rui Salvaterra --- ...-mt7621-pci-phy-re-do-xtal_mode-detection.patch | 68 ---------------------- 1 file changed, 68 deletions(-) delete mode 100644 target/linux/ramips/patches-5.4/0118-staging-mt7621-pci-phy-re-do-xtal_mode-detection.patch (limited to 'target/linux/ramips/patches-5.4/0118-staging-mt7621-pci-phy-re-do-xtal_mode-detection.patch') diff --git a/target/linux/ramips/patches-5.4/0118-staging-mt7621-pci-phy-re-do-xtal_mode-detection.patch b/target/linux/ramips/patches-5.4/0118-staging-mt7621-pci-phy-re-do-xtal_mode-detection.patch deleted file mode 100644 index 9eb8345144..0000000000 --- a/target/linux/ramips/patches-5.4/0118-staging-mt7621-pci-phy-re-do-xtal_mode-detection.patch +++ /dev/null @@ -1,68 +0,0 @@ -From ff83e3023cb8fc3b5dfc12e0c91bf1eb9dc4c4c6 Mon Sep 17 00:00:00 2001 -From: Sergio Paracuellos -Date: Sat, 21 Mar 2020 14:36:24 +0100 -Subject: [PATCH] staging: mt7621-pci-phy: re-do 'xtal_mode' detection - -Detection of the Xtal mode is using magic numbers that -can be avoided using properly some definitions and a more -accurate variable name from 'reg' into 'xtal_mode'. This -increase readability. - -Signed-off-by: Sergio Paracuellos -Link: https://lore.kernel.org/r/20200321133624.31388-4-sergio.paracuellos@gmail.com -Signed-off-by: Greg Kroah-Hartman ---- - drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c | 15 ++++++++++----- - 1 file changed, 10 insertions(+), 5 deletions(-) - ---- a/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c -+++ b/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c -@@ -75,6 +75,9 @@ - - #define RG_PE1_FRC_MSTCKDIV BIT(5) - -+#define XTAL_MODE_SEL_SHIFT 6 -+#define XTAL_MODE_SEL_MASK 0x7 -+ - #define MAX_PHYS 2 - - /** -@@ -136,9 +139,11 @@ static void mt7621_bypass_pipe_rst(struc - static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy) - { - struct device *dev = phy->dev; -- u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); -+ u32 xtal_mode; -+ -+ xtal_mode = (rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0) -+ >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK; - -- reg = (reg >> 6) & 0x7; - /* Set PCIe Port PHY to disable SSC */ - /* Debug Xtal Type */ - mt7621_phy_rmw(phy, RG_PE1_FRC_H_XTAL_REG, -@@ -154,13 +159,13 @@ static void mt7621_set_phy_for_ssc(struc - RG_PE1_PHY_EN, RG_PE1_FRC_PHY_EN); - } - -- if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ -+ if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */ - /* Set Pre-divider ratio (for host mode) */ - mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, - RG_PE1_H_PLL_PREDIV, - RG_PE1_H_PLL_PREDIV_VAL(0x01)); - dev_info(dev, "Xtal is 40MHz\n"); -- } else if (reg >= 6) { /* 25MHz Xal */ -+ } else if (xtal_mode >= 6) { /* 25MHz Xal */ - mt7621_phy_rmw(phy, RG_PE1_H_PLL_REG, - RG_PE1_H_PLL_PREDIV, - RG_PE1_H_PLL_PREDIV_VAL(0x00)); -@@ -206,7 +211,7 @@ static void mt7621_set_phy_for_ssc(struc - mt7621_phy_rmw(phy, RG_PE1_H_PLL_BR_REG, - RG_PE1_H_PLL_BR, RG_PE1_H_PLL_BR_VAL(0x00)); - -- if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */ -+ if (xtal_mode <= 5 && xtal_mode >= 3) { /* 40MHz Xtal */ - /* set force mode enable of da_pe1_mstckdiv */ - mt7621_phy_rmw(phy, RG_PE1_MSTCKDIV_REG, - RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV, -- cgit v1.2.3