From 17cf9c45934fe054b945aa00757d1f9509de68be Mon Sep 17 00:00:00 2001 From: John Crispin Date: Fri, 12 Sep 2014 06:50:46 +0000 Subject: ralink: drop 3.10 support Signed-off-by: John Crispin SVN-Revision: 42481 --- ...-mt7620-fix-usb-issue-during-frequency-sc.patch | 63 ---------------------- 1 file changed, 63 deletions(-) delete mode 100644 target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch (limited to 'target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch') diff --git a/target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch b/target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch deleted file mode 100644 index e29bb2b3e0..0000000000 --- a/target/linux/ramips/patches-3.10/0016-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 011f4bdba0dd4d1dff6d33b1a65541fc4f09c78e Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 24 May 2013 21:28:08 +0200 -Subject: [PATCH 16/25] MIPS: ralink: mt7620: fix usb issue during frequency - scaling - -If the USB HCD is running and the cpu is scaled too low, then the USB stops -working. Increase the idle speed of the core to fix this if the kernel is -built with USB support. - -The values are taken from the Ralink SDK Kernel. - -Signed-off-by: John Crispin ---- - arch/mips/include/asm/mach-ralink/mt7620.h | 1 + - arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++ - 2 files changed, 20 insertions(+) - ---- a/arch/mips/include/asm/mach-ralink/mt7620.h -+++ b/arch/mips/include/asm/mach-ralink/mt7620.h -@@ -20,6 +20,7 @@ - #define SYSC_REG_CHIP_REV 0x0c - #define SYSC_REG_SYSTEM_CONFIG0 0x10 - #define SYSC_REG_SYSTEM_CONFIG1 0x14 -+#define SYSC_REG_CPU_SYS_CLKCFG 0x3c - #define SYSC_REG_CPLL_CONFIG0 0x54 - #define SYSC_REG_CPLL_CONFIG1 0x58 - ---- a/arch/mips/ralink/mt7620.c -+++ b/arch/mips/ralink/mt7620.c -@@ -20,6 +20,12 @@ - - #include "common.h" - -+/* clock scaling */ -+#define CLKCFG_FDIV_MASK 0x1f00 -+#define CLKCFG_FDIV_USB_VAL 0x0300 -+#define CLKCFG_FFRAC_MASK 0x001f -+#define CLKCFG_FFRAC_USB_VAL 0x0003 -+ - /* does the board have sdram or ddram */ - static int dram_type; - -@@ -170,6 +176,19 @@ void __init ralink_clk_init(void) - ralink_clk_add("10000500.uart", 40000000); - ralink_clk_add("10000b00.spi", 40000000); - ralink_clk_add("10000c00.uartlite", 40000000); -+ -+ if (IS_ENABLED(CONFIG_USB)) { -+ /* -+ * When the CPU goes into sleep mode, the BUS clock will be too low for -+ * USB to function properly -+ */ -+ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); -+ -+ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); -+ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; -+ -+ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); -+ } - } - - void __init ralink_of_remap(void) -- cgit v1.2.3