From 4287f739894ba2f95aca107e785b41a053c21315 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ataberk=20=C3=96zen?= Date: Wed, 19 Aug 2020 21:43:54 +0300 Subject: ramips: add support for Xiaomi Mi Router 4C MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit adds support for Xiaomi's Mi Router 4C device. Specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 16MB - RAM: 64MB DDR2 - 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA - Antennas: 4x external single band antennas - WAN: 1x 10/100M - LAN: 2x 10/100M - LEDs: 2x yellow/blue. Programmable (labelled as power on case) - Non-programmable (shows WAN activity) - Button: Reset How to install: 1- Use OpenWRTInvasion to gain telnet and ftp access. 2- Push openwrt firmware to /tmp/ using ftp. 3- Connect to router using telnet. (IP: 192.168.31.1 - Username: root - No password) 4- Use command "mtd -r write /tmp/firmware.bin OS1" to flash into the router.. 5- It takes around 2 minutes. After that router will restart itself to OpenWrt. Signed-off-by: Ataberk Özen [wrap commit message, bump PKG_RELEASE for uboot-envtools, remove dts-v1 from DTS, fix LED labels] Signed-off-by: Adrian Schmutzler --- target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 5 +++++ target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount | 1 + 2 files changed, 6 insertions(+) (limited to 'target/linux/ramips/mt76x8') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index f4e3fcacb5..6f0078c70a 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -137,6 +137,10 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "4:lan:1" "2:lan:2" "0:wan" "6@eth0" ;; + xiaomi,mi-router-4c) + ucidef_add_switch "switch0" \ + "4:lan:1" "2:lan:2" "1:wan" "6@eth0" + ;; xiaomi,miwifi-nano) ucidef_add_switch "switch0" \ "0:lan:2" "2:lan:1" "4:wan" "6@eth0" @@ -234,6 +238,7 @@ ramips_setup_macs() label_mac=$(mtd_get_mac_binary factory 0x4) wan_mac=$(mtd_get_mac_binary factory 0x28) ;; + xiaomi,mi-router-4c|\ xiaomi,mir4a-100m) wan_mac=$(mtd_get_mac_binary factory 0x4) ;; diff --git a/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount b/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount index 3c21433cc5..23f1e71b41 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount +++ b/target/linux/ramips/mt76x8/base-files/etc/init.d/bootcount @@ -8,6 +8,7 @@ boot() { [ -n "$(fw_printenv bootcount bootchanged 2>/dev/null)" ] &&\ echo -e "bootcount\nbootchanged\n" | /usr/sbin/fw_setenv -s - ;; + xiaomi,mi-router-4c|\ xiaomi,miwifi-nano) fw_setenv flag_boot_success 1 ;; -- cgit v1.2.3