From a8f3c97ce83dc97cd7acb040a715ecd75d824161 Mon Sep 17 00:00:00 2001 From: Senis John Date: Sat, 19 Nov 2022 11:30:54 +0800 Subject: ramips: add support for HiWiFi HC5611 CPU: MediaTek MT7628AN @ 575 MHz Flash: 16 MB RAM: 128 MB Ethernet: 10/100Mbps x 1 Wlan: 300 Mbps USB: USB 2.0 x 1 LED: red/green x 1 Button: reset x 1 1. Open https://www.hiwifi.wtf/, Get Cloud token and unlock ssh 2. Upload the openwrt firmware to the router via SCP 3. Login the router via SSH 4. Run `mtd -r write path_to_firmware.bin firmware` I have tested on my device. - The LED will display RED on power-on, After system start completed, trun GREEN - Reset button working now. Long press after 5s will reset factory. Short press less 1s will reboot the device - USB can working under official u-boot Signed-off-by: Senis John --- target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 3 +++ target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 2 ++ .../ramips/mt76x8/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 1 + 3 files changed, 6 insertions(+) (limited to 'target/linux/ramips/mt76x8/base-files') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index 8a21756225..66628cea09 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -46,6 +46,9 @@ skylab,skw92a) hilink,hlk-7688a) ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" ;; +hiwifi,hc5611) + ucidef_set_led_netdev "internet" "internet" "red:internet" "br-lan" "tx rx" + ;; hiwifi,hc5661a|\ hiwifi,hc5761a) ucidef_set_led_switch "internet" "internet" "blue:internet" "switch0" "0x10" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 38ff38bac5..d85cdf3db7 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -14,6 +14,7 @@ ramips_setup_interfaces() glinet,microuter-n300|\ glinet,vixmini|\ hak5,wifi-pineapple-mk7|\ + hiwifi,hc5611|\ mediatek,linkit-smart-7688|\ minew,g1-c|\ onion,omega2p|\ @@ -226,6 +227,7 @@ ramips_setup_macs() zyxel,keenetic-extra-ii) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1) ;; + hiwifi,hc5611|\ hiwifi,hc5661a|\ hiwifi,hc5761a|\ hiwifi,hc5861b) diff --git a/target/linux/ramips/mt76x8/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt76x8/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index b8f8faee9c..c9e205a0fc 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt76x8/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -10,6 +10,7 @@ PHYNBR=${DEVPATH##*/phy} board=$(board_name) case "$board" in + hiwifi,hc5611|\ hiwifi,hc5661a|\ hiwifi,hc5761a|\ hiwifi,hc5861b) -- cgit v1.2.3