From 766733e17226221a310a30c91927a79f07a456e5 Mon Sep 17 00:00:00 2001 From: Rodrigo Araujo Date: Fri, 10 Dec 2021 20:09:37 +0000 Subject: ramips: add support for Joowin WR758AC V1 and V2 This commit adds support for Joowin (aka Comfast) WR758AC V1 and V2 devices. Both have the same wall AP/repeater form factor and differ only in the 5Ghz chipset (V1 has MT7662, V2 has MT7663). OpenWrt developers forum page: https://forum.openwrt.org/t/87355 Specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 8MB - RAM: 64MB DDR2 - 2.4 GHz: 802.11b/g/n (MT7603) - 5 GHz: 802.11ac (V1 has MT7662, V2 has MT7663) - Antennas: 4x external single band antennas - LAN: 1x 10/100M - LED: Wifi 3x blue. Programmable - Button: WPS MAC addresses as verified by OEM firmware: use address source LAN *:83 factory 0xe000 2g *:85 factory 0x4 5g *:86 factory 0x8004 How to install: 1- Setup a TFTP server on a machine with IP address 192.168.1.10/24 2- Name the image as `firmware_auto.bin` and place it on the root of the TFTP server 3- Connect the device via Ethernet, it should pick and flash the image Signed-off-by: Rodrigo Araujo --- target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 2 ++ 1 file changed, 2 insertions(+) (limited to 'target/linux/ramips/mt76x8/base-files') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 08b2e6cebc..43d2647cf0 100644 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -129,6 +129,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:wan" "6@eth0" ;; + joowin,jw-wr758ac-v1|\ + joowin,jw-wr758ac-v2|\ tplink,tl-wr902ac-v3|\ wavlink,wl-wn576a2) ucidef_add_switch "switch0" \ -- cgit v1.2.3