From dbaf0d20bb6afec4a592456af6b1238b46fa1acb Mon Sep 17 00:00:00 2001 From: Lars Wessels Date: Thu, 25 Jun 2020 21:09:59 +0200 Subject: ramips: add support for WAVLINK WL-WN577A2 This commit adds support for the Wavlink WL-WN577A2 (black case) dual-band wall-plug wireless router. In Germany this device is sold under the brand name Maginon WL-755 (white case): Device specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 8MB - RAM: 64MB - Bootloader: U-Boot - Ethernet: 2x 10/100 Mbps (Ralink RT3050) - 2.4 GHz: 802.11b/g/n SoC - 5 GHz: 802.11a/n/ac MT7610E - Antennas: internal - 4 green LEDs: 1 programmable (WPS) + LAN, WAN, POWER - Buttons: Reset, WPS - Small sliding power switch Flashing instructions (U-boot): - Configure a TFTP server on your PC/Laptop and set its IP to 192.168.10.100 - Rename the OpenWrt image to firmware.bin and place it in the root folder of the TFTP server - Power off (using the small sliding power switch on the left side) the device and connect an ethernet cable from its LAN or WAN port to your PC/Laptop - Press the WPS button (and keep it pressed) - Power on the device (using the small power switch) - After a few seconds, when the WAN/LAN LED stops blinking very fast, release the WPS button - Flashing OpenWrt takes less than a minute, system will reboot automatically - After reboot the WPS LED will indicate the current OpenWrt running status Signed-off-by: Lars Wessels [removed unused labels - fix whitespace errors - wrap commit message] Signed-off-by: David Bauer --- target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds | 4 ++++ target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 7 ++++++- 2 files changed, 10 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/mt76x8/base-files/etc/board.d') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds index fc582becb9..9db39cbdde 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/01_leds @@ -122,6 +122,10 @@ wavlink,wl-wn575a3) ucidef_set_led_rssi "wifi-med" "wifi-med" "$boardname:green:wifi-med" "wlan1" "50" "84" ucidef_set_led_rssi "wifi-high" "wifi-high" "$boardname:green:wifi-high" "wlan1" "85" "100" ;; +wavlink,wl-wn577a2) + ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x8" + ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10" + ;; zbtlink,zbt-we1226) set_wifi_led "$boardname:green:wlan" ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01" diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 2b4ca0926f..1cccc16415 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -38,7 +38,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6@eth0" ;; - buffalo,wcr-1166ds) + buffalo,wcr-1166ds|\ + wavlink,wl-wn577a2) ucidef_add_switch "switch0" \ "3:lan" "4:wan" "6@eth0" ;; @@ -186,6 +187,10 @@ ramips_setup_macs() wiznet,wizfi630s) wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x28)" 1) ;; + wavlink,wl-wn577a2) + wan_mac=$(mtd_get_mac_binary factory 0x2e) + label_mac=$(mtd_get_mac_binary factory 0x4) + ;; skylab,skw92a|\ totolink,lr1200) wan_mac=$(mtd_get_mac_binary factory 0x2e) -- cgit v1.2.3