From 6410c30dc7cefdf06dca1e09d1c337138aa4abea Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Fri, 13 Mar 2020 04:19:32 +0900 Subject: ramips: add support for TOTOLINK A3 TOTOLINK A3 is a clone of ipTIME A3. The only difference is the model name. Specifications: - SoC: MT7628AN - RAM: DDR2 64MB - Flash: SPI NOR 8MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7612EN - Ethernet: 3x 10/100Mbps - Switch: SoC internal Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Tested on device by JasonHCH Signed-off-by: Sungbo Eo --- target/linux/ramips/mt76x8/base-files/etc/board.d/02_network | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'target/linux/ramips/mt76x8/base-files/etc/board.d/02_network') diff --git a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network index 913a0817dc..5230717506 100755 --- a/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt76x8/base-files/etc/board.d/02_network @@ -72,7 +72,8 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "0:lan" "1:lan" "4:wan" "6@eth0" ;; - iptime,a3) + iptime,a3|\ + totolink,a3) ucidef_add_switch "switch0" \ "2:lan:2" "3:lan:1" "0:wan" "6@eth0" ;; @@ -166,7 +167,8 @@ ramips_setup_macs() wan_mac=$(macaddr_add "$lan_mac" 1) ;; iptime,a3|\ - iptime,a604m) + iptime,a604m|\ + totolink,a3) wan_mac=$(mtd_get_mac_binary u-boot 0x1fc40) ;; mediatek,linkit-smart-7688|\ -- cgit v1.2.3