From 3c31f6b521bb5fc49e222a8f2bcd454b73452a0e Mon Sep 17 00:00:00 2001 From: Sebastian Schaper Date: Sat, 7 Jan 2023 13:45:44 +0100 Subject: ramips: add support for D-Link DAP-X1860 A1 The DAP-X1860 is a wall-plug AX1800 repeater. Specifications: - MT7621, 256 MiB RAM, 128 MiB SPI NAND - MT7915 + MT7975 2x2 802.11ax (DBDC) - Ethernet: 1 port 10/100/1000 - LED RSSI bargraph (2x green, 1x red/orange), status and RSSI LEDs are incorrectly populated red/orange (should be red/green according to documentation) Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tar -xvf DAP-X1860_RevA_Firmware_101b94.bin - openssl enc -d -md md5 -aes-256-cbc -in FWImage.st2 \ -out FWImage.st1 -k MB0dBx62oXJXDvt12lETWQ== - tar -xvf FWImage.st1 - flash kernel_DAP-X1860.bin via Recovery Signed-off-by: Sebastian Schaper --- target/linux/ramips/mt7621/base-files/etc/board.d/01_leds | 7 +++++++ target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 1 + .../mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac | 7 +++++++ target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh | 1 + 4 files changed, 16 insertions(+) (limited to 'target/linux/ramips/mt7621/base-files') diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 9e0eaac941..5fafb9b50a 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -56,6 +56,13 @@ jcg,y2|\ xzwifi,creativebox-v1) ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan" ;; +dlink,dap-x1860-a1) + ucidef_set_rssimon "wlan1" "200000" "1" + ucidef_set_led_rssi "rssilow" "RSSILOW" "orange:rssilow" "wlan1" "1" "25" + ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "26" "100" + ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:rssimedium" "wlan1" "51" "100" + ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:rssihigh" "wlan1" "76" "100" + ;; dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index dea433dec4..9a8e385a31 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -11,6 +11,7 @@ ramips_setup_interfaces() ampedwireless,ally-00x19k|\ asus,rp-ac56|\ asus,rp-ac87|\ + dlink,dap-x1860-a1|\ edimax,re23s|\ mikrotik,ltap-2hnd|\ mikrotik,routerboard-m11g|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 69ecaefd27..161bd942db 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -22,6 +22,13 @@ case "$board" in hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress ;; + dlink,dap-x1860-a1) + hw_mac_addr="$(mtd_get_mac_binary factory 0x4)" + [ "$PHYNBR" = "0" ] && \ + macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && \ + macaddr_add $hw_mac_addr 4 > /sys${DEVPATH}/macaddress + ;; dlink,dir-853-a3) [ "$PHYNBR" = "0" ] && \ macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \ diff --git a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh index fd856e6b3a..53ff9c016c 100755 --- a/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/mt7621/base-files/lib/upgrade/platform.sh @@ -59,6 +59,7 @@ platform_do_upgrade() { beeline,smartbox-giga|\ beeline,smartbox-turbo|\ belkin,rt1800|\ + dlink,dap-x1860-a1|\ dlink,dir-1960-a1|\ dlink,dir-2640-a1|\ dlink,dir-2660-a1|\ -- cgit v1.2.3