From fbb46b7bcc24e5ef2581930e2a9b3996e4381f97 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Tue, 9 Jun 2020 12:31:57 +0200 Subject: ramips: add support for Netgear EX6120 Specifications: * SoC: MT7620A * CPU: 580 MHz * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5GHz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The device is identical to the EX6130 except for the mains socket and the hardware ID. Installation: The -factory images can be flashed from the device's web interface or via nmrpflash. Notes: MAC addresses were set up based on the EX6130 setup. This is based on prior work of Adam Serbinski and Mathias Buchwald. Tested by Mathias Buchwald. Signed-off-by: Adrian Schmutzler --- target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ramips/mt7620') diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index 2a54fa12e9..46ed857cdc 100755 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -55,6 +55,7 @@ ramips_setup_interfaces() microduino,microwrt|\ netgear,ex2700|\ netgear,ex3700|\ + netgear,ex6120|\ netgear,ex6130|\ netgear,wn3000rp-v3|\ planex,cs-qr10|\ -- cgit v1.2.3