From 482a7e23a44c23ea6c6a22e3ea97eb3bf94e70d1 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Sat, 18 Dec 2021 22:19:06 +0900 Subject: ramips: add support for WeVO AIR DUO WeVO AIR DUO is a 1-bay NAS & 802.11ac (Wi-Fi 5) router, based on MediaTek MT7620A. Specifications: * SoC: MT7620A * RAM: 64 MiB * Flash: SPI NOR 16 MiB * USB & SATA bridge controller: JMicron JMS567 * SATA 6Gb/s: 2.5" drive slot * USB 3.0: Micro-B * USB 2.0: connected to SoC * Wi-Fi: * 2.4 GHz: SoC built-in * 5 GHz: MT7612EN * Ethernet: 5x 1GbE * Switch: MT7530WU * UART: 4-pin 1.27 mm pitch through-hole (57600 baud) * Pinout: (3V3)|(RXD) (TXD) (GND) Notes: * The drive is accessible through the external USB port only when the router is turned off. Installation via web interface: 1. Flash **initramfs** image through the stock web interface. The image filename should have ".upload" extension. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Sungbo Eo --- target/linux/ramips/mt7620/base-files/etc/board.d/02_network | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'target/linux/ramips/mt7620/base-files/etc') diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network index a00f168672..a64891f94a 100644 --- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network @@ -186,7 +186,8 @@ ramips_setup_interfaces() ;; linksys,e1700|\ netis,wf2770|\ - ralink,mt7620a-mt7530-evb) + ralink,mt7620a-mt7530-evb|\ + wevo,air-duo) ucidef_add_switch "switch0" ucidef_add_switch_attr "switch0" "enable" "false" ucidef_add_switch "switch1" \ @@ -350,6 +351,7 @@ ramips_setup_macs() lenovo,newifi-y1s|\ ohyeah,oy-0001|\ wavlink,wl-wn530hg4|\ + wevo,air-duo|\ youku,yk-l1|\ youku,yk-l1c) wan_mac=$(mtd_get_mac_binary factory 0x2e) -- cgit v1.2.3