From f4eef5f2a18400bc7f548d629e1d5825a2b26e5a Mon Sep 17 00:00:00 2001 From: Rosen Penev Date: Mon, 22 Mar 2021 14:06:14 -0700 Subject: ramips: add support for Linksys E7350 Linksys E7350 is an 802.11ax (Wi-Fi 6) router, based on MediaTek MT7621A. Specifications: - SoC: MT7621 (880MHz, 2 Cores) - RAM: 256 MB - Flash: 128 MB NAND - Wi-Fi: - MT7915D: 2.4/5 GHz (DBDC) - Ethernet: 5x 1GiE MT7530 - USB: 1x USB 3.0 - UART: J4 (57600 baud) - Pinout: [3V3] (TXD) (RXD) (blank) (GND) Notes: * This device has a dual-boot partition scheme, but this firmware works only on boot partition 1. Installation: Upload the generated factory.bin image via the stock web firmware updater. Signed-off-by: Rosen Penev --- target/linux/ramips/image/mt7621.mk | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 974299f26b2..661f44d5e99 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1192,6 +1192,15 @@ define Device/linksys_e5600 endef TARGET_DEVICES += linksys_e5600 +define Device/linksys_e7350 + $(Device/belkin_rt1800) + DEVICE_VENDOR := Linksys + DEVICE_MODEL := E7350 + IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \ + append-ubi | check-size | belkin-header GOLF 1 9.9.9 +endef +TARGET_DEVICES += linksys_e7350 + define Device/linksys_ea7xxx $(Device/dsa-migration) $(Device/uimage-lzma-loader) -- cgit v1.2.3