From f276395cda79996d395209700a51bb94a0e25abd Mon Sep 17 00:00:00 2001 From: Marc Egerton Date: Fri, 2 Oct 2020 18:30:59 +0100 Subject: ramips: add support for the Hak5 WiFi Pineapple Mark 7 This patch adds support for the WiFi Pineapple Mark 7, a wireless penetration testing tool. Specifications: * SoC: MediaTek MT7628 (580MHz) * RAM: 256MiB (DDR2) * Storage 1: 32MiB NOR (SPI) * Storage 2: 2GB eMMC * Wireless 1: 802.11b/g/n 2.4GHz (Built In) * Wireless 2: 802.11b/g/n 2.4GHz (MT7601) * Wireless 3: 802.11b/g/n 2.4GHz (MT7601) * USB: 1x USB Type-A 2.0 Host Port * Ethernet: 1x USB Type-C AX88772C Ethernet * UART: 57600 8N1 on PCB * Inputs: 1x Reset Button * Outputs: 1x RGB LED * FCCID: 2AA52MK7 Flash Instructions: Original firmware is based on OpenWRT. Use sysupgrade via SSH to flash. Signed-off-by: Marc Egerton [pepe2k@gmail.com: set only required/used gpio groups to gpio function] Signed-off-by: Piotr Dymacz --- target/linux/ramips/image/mt76x8.mk | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 6327c95bb0f..54592883411 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -119,6 +119,15 @@ define Device/glinet_vixmini endef TARGET_DEVICES += glinet_vixmini +define Device/hak5_wifi-pineapple-mk7 + IMAGE_SIZE := 32448k + DEVICE_VENDOR := Hak5 + DEVICE_MODEL := WiFi Pineapple Mark 7 + DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci + SUPPORTED_DEVICES += wifi-pineapple-mk7 +endef +TARGET_DEVICES += hak5_wifi-pineapple-mk7 + define Device/hilink_hlk-7628n IMAGE_SIZE := 32448k DEVICE_VENDOR := HILINK -- cgit v1.2.3