From a664d39c5bb4a77ffc90a6fdfdca3606292b650d Mon Sep 17 00:00:00 2001 From: Alexey Kosmakov Date: Mon, 30 May 2022 13:46:34 +0500 Subject: ramips: add support for SNR SNR-CPE-ME2-Lite SNR SNR-CPE-ME2-Lite is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4 GHz 2T2R (MediaTek MT7603E) 5 GHz 2T2R (MediaTek MT7613BE) - Ethernet : 10/100/1000 Mbps x5 - Switch : MediaTek MT7530 (SoC) - UART : through-hole on PCB - J4: 3.3V, GND, TX, RX - 57600n8 - Power : 12 VDC, 1.5 A Flash instruction via WEB (firmware 1.10.4 and later) 1. Boot SNR-CPE-ME2-Lite normally with "Router" mode 2. Access to "http://192.168.1.1/" and open "Administration -> Management" page 3. Select the OpenWrt factory image in "Firmware update" section and click "Update" button 4. Wait ~120 seconds to complete flashing Flash instruction via TFTP (all version): 1. Boot SNR-CPE-ME2-Lite to recovery mode (hold the reset button while power on) 2. Send firmware via TFTP client: TFTP Server address: 192.168.1.1 TFTP Client address: 192.168.1.131 3. Wait ~120 seconds to complete flashing Signed-off-by: Alexey Kosmakov --- target/linux/ramips/image/mt7621.mk | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 92fc9ec12e4..10add92a23b 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1723,6 +1723,17 @@ define Device/sercomm_na502s endef TARGET_DEVICES += sercomm_na502s +define Device/snr_snr-cpe-me2-lite + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 16064k + DEVICE_VENDOR := SNR + DEVICE_MODEL := SNR-CPE-ME2-Lite + UIMAGE_NAME := $$(DEVICE_MODEL) + DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615e kmod-mt7663-firmware-ap +endef +TARGET_DEVICES += snr_snr-cpe-me2-lite + define Device/storylink_sap-g3200u3 $(Device/dsa-migration) IMAGE_SIZE := 7872k -- cgit v1.2.3