From a4e9c8f14b63cd44300ed452312c03a69aae9ca1 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Tue, 12 Nov 2019 01:23:07 +0900 Subject: ramips: add support for netis WF2770 netis WF2770 is a 2.4/5GHz band AC750 router, based on MediaTek MT7620A. Specifications: - SoC: MT7620A - RAM: DDR2 64MB - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: SoC internal - 5GHz: MT7610EN - Ethernet: 5x 10/100/1000Mbps - Switch: MT7530BU - UART: - J2: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1 MAC addresses in factory partition: 0x0004: LAN, WiFi 2.4GHz (label_mac-6) 0x0028: not used (label_mac-1) 0x002e: WAN (label_mac) 0x8004: WiFi 5GHz (label_mac+2) Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Reviewed-by: Pawel Dembicki Signed-off-by: Sungbo Eo --- target/linux/ramips/image/Makefile | 6 ++++++ target/linux/ramips/image/mt7620.mk | 11 +++++++++++ target/linux/ramips/image/mt7621.mk | 6 ------ 3 files changed, 17 insertions(+), 6 deletions(-) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 4806226fd0..b00e6d8726 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -100,6 +100,12 @@ define Build/mkdlinkfw-factory mv $@.new $@ endef +define Build/netis-tail + echo -n $(1) >> $@ + echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \ + sed 's/../\\\\x&/g' | xargs echo -ne >> $@ +endef + define Build/poray-header $(STAGING_DIR_HOST)/bin/mkporayfw $(1) -f $@ -o $@.new mv $@.new $@ diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 4fa8c68a88..e435b1d15f 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -700,6 +700,17 @@ define Device/netgear_wn3000rp-v3 endef TARGET_DEVICES += netgear_wn3000rp-v3 +define Device/netis_wf2770 + SOC := mt7620a + IMAGE_SIZE := 16064k + UIMAGE_NAME := WF2770_0.0.00 + DEVICE_VENDOR := NETIS + DEVICE_MODEL := WF2770 + DEVICE_PACKAGES := kmod-mt76x0e + KERNEL_INITRAMFS := $(KERNEL_DTB) | netis-tail WF2770 | uImage lzma +endef +TARGET_DEVICES += netis_wf2770 + define Device/nexx_wt3020-4m SOC := mt7620n BLOCKSIZE := 4k diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 082bb31b79..343379b764 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -81,12 +81,6 @@ define Build/iodata-mstc-header ) endef -define Build/netis-tail - echo -n $(1) >> $@ - echo -n $(UIMAGE_NAME)-yun | $(STAGING_DIR_HOST)/bin/mkhash md5 | \ - sed 's/../\\\\x&/g' | xargs echo -ne >> $@ -endef - define Build/ubnt-erx-factory-image if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(KERNEL_SIZE)" ]; then \ echo '21001:6' > $(1).compat; \ -- cgit v1.2.3