From a32c06f44d6340fd25d1eb276f62b8494de9f462 Mon Sep 17 00:00:00 2001 From: INAGAKI Hiroshi Date: Wed, 16 May 2018 21:42:48 +0900 Subject: ramips: add support for I-O DATA WN-GX300GR I-O DATA WN-GX300GR is a 2.4 GHz band 11n router, based on MediaTek MT7621S. Specification: - MT7621S (1-Core, 2-Threads) - 64 MB of RAM - 8 MB of Flash (SPI) - 2T2R 2.4 GHz - 5x 10/100/1000 Mbps Ethernet - 2x LEDs, 4x keys (2x buttons, 1x slide switch) - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 115200 bps (U-Boot, OpenWrt) Flash instruction using initramfs image: 1. Connect serial cable to UART header 2. Rename OpenWrt initramfs image for WN-GX300GR to "uImageWN-GX300GR" and place it in the TFTP directory 3. Set the IP address of the computer to 192.168.99.8, connect to the LAN port of WN-GX300GR, and start the TFTP server on the computer 4. Connect power cable to WN-GX300GR and turn on the router 5. Press "1" key on the serial console to interrupt boot process on U-Boot, press Enter key 3 times and start firmware download via TFTP 6. WN-GX300GR downloads initramfs image and boot with it 7. On the initramfs image, execute "mtd erase firmware" to erase stock firmware and execute sysupgrade with sysupgrade image for WN-GX300GR 8. Wait ~150 seconds to complete flasing Signed-off-by: INAGAKI Hiroshi --- target/linux/ramips/image/mt7621.mk | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index b20f35976b..5bbdd2074e 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -114,6 +114,14 @@ define Device/hc5962 endef TARGET_DEVICES += hc5962 +define Device/iodata_wn-gx300gr + DTS := WN-GX300GR + IMAGE_SIZE := 7798784 + DEVICE_TITLE := I-O DATA WN-GX300GR + DEVICE_PACKAGES := kmod-mt7603 wpad-mini +endef +TARGET_DEVICES += iodata_wn-gx300gr + define Device/k2p DTS := K2P IMAGE_SIZE := $(ralink_default_fw_size_16M) -- cgit v1.2.3