From 99dd2709b855baa9e68c7c7106743a7c4a91ee0c Mon Sep 17 00:00:00 2001 From: Yong-hyu Ban Date: Mon, 7 Oct 2019 05:06:31 +0900 Subject: ramips: add support for ipTIME A8004T ipTIME A8004T is a 2.4/5GHz band AC2600 router, based on Mediatek MT7621A. Specifications: - SoC: MT7621A - RAM: DDR3 256M - Flash: SPI NOR 16MB - WiFi: - 2.4GHz: MT7615E - 5GHz: MT7615E - Ethernet: 5x 10/100/1000Mbps - Switch: SoC internal - USB: 1 * USB3.0 port - UART: - J4: 3.3V, TX, RX, GND (3.3V is the square pad) / 57600 8N1 - Other info: - J9: Unknown unpopulated header. Installation via web interface: 1. Flash **initramfs** image through the stock web interface. 2. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Revert to stock firmware: 1. Perform sysupgrade with stock image. Signed-off-by: Yong-hyu Ban [do not enable xhci node in DTS which is already enabled in DTSI] Signed-off-by: Adrian Schmutzler --- target/linux/ramips/image/mt7621.mk | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index b33c2c5bc0..2baec6aa2f 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -382,6 +382,16 @@ define Device/iptime_a6ns-m endef TARGET_DEVICES += iptime_a6ns-m +define Device/iptime_a8004t + SOC := mt7621 + IMAGE_SIZE := 16128k + UIMAGE_NAME := a8004t + DEVICE_VENDOR := ipTIME + DEVICE_MODEL := A8004T + DEVICE_PACKAGES := kmod-mt7615e kmod-usb3 wpad-basic +endef +TARGET_DEVICES += iptime_a8004t + define Device/jcg_jhr-ac876m SOC := mt7621 IMAGE_SIZE := 16064k -- cgit v1.2.3