From 7fb11c8ed2ca47716a2f27e5efed8bcd567cfc98 Mon Sep 17 00:00:00 2001 From: Thibaut VARENE Date: Wed, 18 Jan 2017 11:34:56 +0100 Subject: ramips: add support for Netgear WN3000RPv3 This patch adds support for the Netgear WN3000RPv3 http://www.netgear.com/support/product/wn3000rpv3.aspx Specifications: - SoC: MediaTek MT7620A (580MHz, ramips) - RAM: 32MB DDR - Storage: 8MB NOR SPI flash - Wireless: builtin MT7620A, 2x2:2 with u.FL connectors - Ethernet: 1x100M - Serial: JP1 header, 57600-8N1 - Stock firmware based on OpenWRT Kamikaze Like the EX2700, the bootloader expects a secondary image signature, see https://forum.openwrt.org/viewtopic.php?pid=312577#p312577 This is why the same fakeroot image is used for the WN3000 Signed-off-by: Thibaut VARENE --- target/linux/ramips/image/mt7620.mk | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'target/linux/ramips/image') diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index 1889bcf708..42e0ab63c2 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -75,6 +75,17 @@ define Device/ex2700 endef TARGET_DEVICES += ex2700 +define Device/wn3000rpv3 + DTS := WN3000RPV3 + BLOCKSIZE := 4k + IMAGES += factory.bin + KERNEL := $(KERNEL_DTB) | uImage lzma | pad-kernel-ex2700 + IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \ + netgear-header -B WN3000RPv3 -H 29764836+8+0+32+2x2+0 + DEVICE_TITLE := Netgear WN3000RPv3 +endef +TARGET_DEVICES += wn3000rpv3 + define Device/wt3020-4M DTS := WT3020-4M BLOCKSIZE := 4k -- cgit v1.2.3